bfd/

	* configure.in: Define GENINSRC_NEVER.
	* doc/Makefile.am (bfd.info): Remove srcdir prefix.
	(MAINTAINERCLEANFILES): Add info file.
	(DISTCLEANFILES): Pretend to add info file.
	* po/Make-in (.po.gmo): Put gmo files in objdir.
	* configure, Makefile.in, doc/Makefile.in: Regenerated.
binutils/
	* configure.in: Define GENINSRC_NEVER.
	* doc/Makefile.am (MAINTAINERCLEANFILES): Add info file.
	(DISTCLEANFILES): Pretend to add info file.
	* po/Make-in (.po.gmo): Put gmo files in objdir.
	* configure, Makefile.in, doc/Makefile.in: Regenerated.
gas/
	* configure.in: Define GENINSRC_NEVER.
	* doc/Makefile.am (as.info): Remove srcdir prefix.
	(MAINTAINERCLEANFILES): Add info file.
	(DISTCLEANFILES): Pretend to add info file.
	* po/Make-in (.po.gmo): Put gmo files in objdir.
	* configure, Makefile.in, doc/Makefile.in: Regenerated.
gprof/
	* configure.in: Define GENINSRC_NEVER.
	* doc/Makefile.am (gprof.info): Remove srcdir prefix.
	(MAINTAINERCLEANFILES): Add info file.
	(DISTCLEANFILES): Pretend to add info file.
	* po/Make-in (.po.gmo): Put gmo files in objdir.
	* configure, Makefile.in: Regenerated.
ld/
	* configure.in: Define GENINSRC_NEVER.
	* doc/Makefile.am (ld.info): Remove srcdir prefix.
	(MAINTAINERCLEANFILES): Add info file.
	(DISTCLEANFILES): Pretend to add info file.
	* po/Make-in (.po.gmo): Put gmo files in objdir.
	* configure, Makefile.in: Regenerated.
opcodes/
	* po/Make-in (.po.gmo): Put gmo files in objdir.

2 files changed, 34 insertions, 27 deletions

diff --git a/bfd/doc/Makefile.am b/bfd/doc/Makefile.am
index 6d221fa..1ba74b7 100644
--- a/bfd/doc/Makefile.am
+++ b/bfd/doc/Makefile.am
@@ -68,7 +68,7 @@ chew.o: chew.c
 
 protos: libbfd.h libcoff.h bfd.h
 
-$(srcdir)/bfd.info bfd.dvi bfd.html: $(DOCFILES) bfdsumm.texi bfd.texinfo
+bfd.info bfd.dvi bfd.html: $(DOCFILES) bfdsumm.texi bfd.texinfo
 
 # We can't replace these rules with an implicit rule, because
 # makes without VPATH support couldn't find the .h files in `..'.
@@ -309,6 +309,11 @@ install-html-am: $(HTMLS)
 	  fi; \
 	done
 
+MAINTAINERCLEANFILES += bfd.info
 
-
-
+# Automake 1.9 will only build info files in the objdir if they are
+# mentioned in DISTCLEANFILES.  It doesn't have to be unconditional,
+# though, so we use a bogus condition.
+if GENINSRC_NEVER
+DISTCLEANFILES += bfd.info
+endif
diff --git a/bfd/doc/Makefile.in b/bfd/doc/Makefile.in
index 54becb7..9d07b69 100644
--- a/bfd/doc/Makefile.in
+++ b/bfd/doc/Makefile.in
@@ -36,6 +36,11 @@ POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
 target_triplet = @target@
+
+# Automake 1.9 will only build info files in the objdir if they are
+# mentioned in DISTCLEANFILES.  It doesn't have to be unconditional,
+# though, so we use a bogus condition.
+@GENINSRC_NEVER_TRUE@am__append_1 = bfd.info
 subdir = doc
 DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
@@ -54,7 +59,7 @@ CONFIG_CLEAN_FILES =
 depcomp =
 am__depfiles_maybe =
 SOURCES =
-INFO_DEPS = $(srcdir)/bfd.info
+INFO_DEPS = bfd.info
 TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex
 am__TEXINFO_TEX_DIR = $(top_srcdir)/../texinfo
 DVIS = bfd.dvi
@@ -106,7 +111,10 @@ EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
 GENCAT = @GENCAT@
+GENINSRC_NEVER_FALSE = @GENINSRC_NEVER_FALSE@
+GENINSRC_NEVER_TRUE = @GENINSRC_NEVER_TRUE@
 GMSGFMT = @GMSGFMT@
+GREP = @GREP@
 HDEFINES = @HDEFINES@
 INCINTL = @INCINTL@
 INSTALL_DATA = @INSTALL_DATA@
@@ -152,10 +160,7 @@ WARN_CFLAGS = @WARN_CFLAGS@
 WIN32LDFLAGS = @WIN32LDFLAGS@
 WIN32LIBADD = @WIN32LIBADD@
 XGETTEXT = @XGETTEXT@
-ac_ct_AR = @ac_ct_AR@
 ac_ct_CC = @ac_ct_CC@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
 all_backends = @all_backends@
 am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
 am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
@@ -181,6 +186,7 @@ build_vendor = @build_vendor@
 datadir = @datadir@
 datarootdir = @datarootdir@
 docdir = @docdir@
+dvidir = @dvidir@
 exec_prefix = @exec_prefix@
 host = @host@
 host_alias = @host_alias@
@@ -194,12 +200,15 @@ infodir = @infodir@
 install_sh = @install_sh@
 libdir = @libdir@
 libexecdir = @libexecdir@
+localedir = @localedir@
 localstatedir = @localstatedir@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
+psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 sysconfdir = @sysconfdir@
@@ -311,13 +320,14 @@ BFD_H_DEP = \
 noinst_TEXINFOS = bfdint.texi
 MOSTLYCLEANFILES = $(MKDOC) *.o
 CLEANFILES = *.p *.ip
-DISTCLEANFILES = bfd.?? bfd.??? bfd.h libbfd.h libcoff.h texput.log
-MAINTAINERCLEANFILES = $(DOCFILES)
+DISTCLEANFILES = bfd.?? bfd.??? bfd.h libbfd.h libcoff.h texput.log \
+	$(am__append_1)
+MAINTAINERCLEANFILES = $(DOCFILES) bfd.info
 html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
 all: all-am
 
 .SUFFIXES:
-.SUFFIXES: .dvi .html .info .pdf .ps .texinfo
+.SUFFIXES: .dvi .ps
 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
@@ -357,42 +367,38 @@ clean-libtool:
 distclean-libtool:
 	-rm -f libtool
 
-.texinfo.info:
+bfd.info: bfd.texinfo 
 	restore=: && backupdir="$(am__leading_dot)am$$$$" && \
-	am__cwd=`pwd` && cd $(srcdir) && \
 	rm -rf $$backupdir && mkdir $$backupdir && \
 	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
 	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
 	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
 	  done; \
 	else :; fi && \
-	cd "$$am__cwd"; \
 	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-	 -o $@ $<; \
+	 -o $@ `test -f 'bfd.texinfo' || echo '$(srcdir)/'`bfd.texinfo; \
 	then \
 	  rc=0; \
-	  cd $(srcdir); \
 	else \
 	  rc=$$?; \
-	  cd $(srcdir) && \
 	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
 	fi; \
 	rm -rf $$backupdir; exit $$rc
 
-.texinfo.dvi:
+bfd.dvi: bfd.texinfo  
 	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
 	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
-	$(TEXI2DVI) $<
+	$(TEXI2DVI) -o $@ `test -f 'bfd.texinfo' || echo '$(srcdir)/'`bfd.texinfo
 
-.texinfo.pdf:
+bfd.pdf: bfd.texinfo  
 	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
 	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
-	$(TEXI2PDF) $<
+	$(TEXI2PDF) -o $@ `test -f 'bfd.texinfo' || echo '$(srcdir)/'`bfd.texinfo
 
-.texinfo.html:
+bfd.html: bfd.texinfo  
 	rm -rf $(@:.html=.htp)
 	if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-	 -o $(@:.html=.htp) $<; \
+	 -o $(@:.html=.htp) `test -f 'bfd.texinfo' || echo '$(srcdir)/'`bfd.texinfo; \
 	then \
 	  rm -rf $@; \
 	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
@@ -402,10 +408,6 @@ distclean-libtool:
 	    rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
 	  exit 1; \
 	fi
-$(srcdir)/bfd.info: bfd.texinfo 
-bfd.dvi: bfd.texinfo 
-bfd.pdf: bfd.texinfo 
-bfd.html: bfd.texinfo 
 .dvi.ps:
 	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
 	$(DVIPS) -o $@ $<
@@ -600,7 +602,7 @@ chew.o: chew.c
 
 protos: libbfd.h libcoff.h bfd.h
 
-$(srcdir)/bfd.info bfd.dvi bfd.html: $(DOCFILES) bfdsumm.texi bfd.texinfo
+bfd.info bfd.dvi bfd.html: $(DOCFILES) bfdsumm.texi bfd.texinfo
 
 # We can't replace these rules with an implicit rule, because
 # makes without VPATH support couldn't find the .h files in `..'.