Add support for the Infineon XC16X.

1 files changed, 112 insertions, 9 deletions

diff --git a/bfd/configure b/bfd/configure
index 5b93fb2..b79f0da 100755
--- a/bfd/configure
+++ b/bfd/configure
@@ -3505,6 +3505,7 @@ cygwin* | mingw* |pw32*)
   ;;
 
 darwin* | rhapsody*)
+  # this will be overwritten by pass_all, but leave it in just in case
   lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
   lt_cv_file_magic_cmd='/usr/bin/file -L'
   case "$host_os" in
@@ -3515,6 +3516,7 @@ darwin* | rhapsody*)
     lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
     ;;
   esac
+  lt_cv_deplibs_check_method=pass_all
   ;;
 
 freebsd* | kfreebsd*-gnu)
@@ -3575,14 +3577,7 @@ irix5* | irix6*)
 
 # This must be Linux ELF.
 linux-gnu*)
-  case $host_cpu in
-  alpha* | mips* | hppa* | i*86 | powerpc* | sparc* | ia64* )
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+  lt_cv_deplibs_check_method=pass_all
   ;;
 
 netbsd* | knetbsd*-gnu)
@@ -3643,6 +3638,67 @@ deplibs_check_method=$lt_cv_deplibs_check_method
 
 # Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
 
+# find the maximum length of command line arguments
+echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
+echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6
+if test "${lt_cv_sys_max_cmd_len+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+    i=0
+  teststring="ABCD"
+
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
+
+  cygwin* | mingw*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536 # usable default for *BSD
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+  esac
+
+fi
+
+if test -n "$lt_cv_sys_max_cmd_len" ; then
+  echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
+echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6
+else
+  echo "$as_me:$LINENO: result: none" >&5
+echo "${ECHO_T}none" >&6
+fi
+
+
 # Only perform the check for file, if the check method requires it
 case $deplibs_check_method in
 file_magic*)
@@ -3976,7 +4032,7 @@ test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
 case $host in
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 3979 "configure"' > conftest.$ac_ext
+  echo '#line 4035 "configure"' > conftest.$ac_ext
   if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
@@ -4031,6 +4087,52 @@ ia64-*-hpux*)
   rm -rf conftest*
   ;;
 
+x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+    case "`/usr/bin/file conftest.o`" in
+    *32-bit*)
+      case $host in
+        x86_64-*linux*)
+          LD="${LD-ld} -m elf_i386"
+          ;;
+        ppc64-*linux*|powerpc64-*linux*)
+          LD="${LD-ld} -m elf32ppclinux"
+          ;;
+        s390x-*linux*)
+          LD="${LD-ld} -m elf_s390"
+          ;;
+        sparc64-*linux*)
+          LD="${LD-ld} -m elf32_sparc"
+          ;;
+      esac
+      ;;
+    *64-bit*)
+      case $host in
+        x86_64-*linux*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        ppc*-*linux*|powerpc*-*linux*)
+          LD="${LD-ld} -m elf64ppc"
+          ;;
+        s390*-*linux*)
+          LD="${LD-ld} -m elf64_s390"
+          ;;
+        sparc*-*linux*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
 *-*-sco3.2v5*)
   # On SCO OpenServer 5, we need -belf to get full-featured binaries.
   SAVE_CFLAGS="$CFLAGS"
@@ -13059,6 +13161,7 @@ do
     bfd_elf32_v850_vec)		tb="$tb elf32-v850.lo elf32.lo $elf" ;;
     bfd_elf32_vax_vec)		tb="$tb elf32-vax.lo elf32.lo $elf" ;;
     bfd_elf32_xstormy16_vec)	tb="$tb elf32-xstormy16.lo elf32.lo $elf" ;;
+    bfd_elf32_xc16x_vec)		tb="$tb elf32-xc16x.lo elf32.lo $elf" ;;
     bfd_elf32_xtensa_le_vec)	tb="$tb xtensa-isa.lo xtensa-modules.lo elf32-xtensa.lo elf32.lo $elf" ;;
     bfd_elf32_xtensa_be_vec)	tb="$tb xtensa-isa.lo xtensa-modules.lo elf32-xtensa.lo elf32.lo $elf" ;;
     bfd_elf64_alpha_freebsd_vec) tb="$tb elf64-alpha.lo elf64.lo $elf"; target_size=64 ;;