Remove i860, i960, bout and aout-adobe targets

Plus remove a few leftovers from the 29k support.

include/
	* aout/adobe.h: Delete.
	* aout/reloc.h: Delete.
	* coff/i860.h: Delete.
	* coff/i960.h: Delete.
	* elf/i860.h: Delete.
	* elf/i960.h: Delete.
	* opcode/i860.h: Delete.
	* opcode/i960.h: Delete.
	* aout/aout64.h (enum reloc_type): Trim off 29k and other unused values.
	* aout/ar.h (ARMAGB): Remove.
	* coff/internal.h (struct internal_aouthdr, struct internal_scnhdr,
	union internal_auxent): Remove i960 support.
bfd/
	* aout-adobe.c: Delete.
	* bout.c: Delete.
	* coff-i860.c: Delete.
	* coff-i960.c: Delete.
	* cpu-i860.c: Delete.
	* cpu-i960.c: Delete.
	* elf32-i860.c: Delete.
	* elf32-i960.c: Delete.
	* hosts/i860mach3.h: Delete.
	* Makefile.am: Remove i860, i960, bout, and adobe support.
	* archures.c: Remove i860 and i960 support.
	* coffcode.h: Likewise.
	* reloc.c: Likewise.
	* aoutx.h: Comment updates.
	* archive.c: Remove BOUT and i960 support.
	* bfd.c: Remove BOUT support.
	* coffswap.h: Remove i960 support.
	* config.bfd: Remove i860, i960 and adobe targets.
	* configure.ac: Remove adode, bout, i860, i960, icoff targets.
	* targets.c: Likewise.
	* ieee.c: Remove i960 support.
	* mach-o.c: Remove i860 support.
	* Makefile.in: Regenerate.
	* bfd-in2.h: Regenerate.
	* configure: Regenerate.
	* libbfd.h: Regenerate.
	* po/SRC-POTFILES.in: Regenerate.
opcodes/
	* opcodes/i860-dis.c: Delete.
	* opcodes/i960-dis.c: Delete.
	* Makefile.am: Remove i860 and i960 support.
	* configure.ac: Likewise.
	* disassemble.c: Likewise.
	* disassemble.h: Likewise.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* po/POTFILES.in: Regenerate.
binutils/
	* ieee.c: Remove i960 support.
	* od-macho.c: Remove i860 support.
	* readelf.c: Remove i860 and i960 support.
	* testsuite/binutils-all/objcopy.exp: Likewise.
	* testsuite/binutils-all/objdump.exp: Likewise.
	* testsuite/lib/binutils-common.exp: Likewise.
gas/
	* config/aout_gnu.h: Delete.
	* config/tc-i860.c: Delete.
	* config/tc-i860.h: Delete.
	* config/tc-i960.c: Delete.
	* config/tc-i960.h: Delete.
	* doc/c-i860.texi: Delete.
	* doc/c-i960.texi: Delete.
	* testsuite/gas/i860/README.i860: Delete.
	* testsuite/gas/i860/bitwise.d: Delete.
	* testsuite/gas/i860/bitwise.s: Delete.
	* testsuite/gas/i860/branch.d: Delete.
	* testsuite/gas/i860/branch.s: Delete.
	* testsuite/gas/i860/bte.d: Delete.
	* testsuite/gas/i860/bte.s: Delete.
	* testsuite/gas/i860/dir-align01.d: Delete.
	* testsuite/gas/i860/dir-align01.s: Delete.
	* testsuite/gas/i860/dir-intel01.d: Delete.
	* testsuite/gas/i860/dir-intel01.s: Delete.
	* testsuite/gas/i860/dir-intel02.d: Delete.
	* testsuite/gas/i860/dir-intel02.s: Delete.
	* testsuite/gas/i860/dir-intel03-err.l: Delete.
	* testsuite/gas/i860/dir-intel03-err.s: Delete.
	* testsuite/gas/i860/dual01.d: Delete.
	* testsuite/gas/i860/dual01.s: Delete.
	* testsuite/gas/i860/dual02-err.l: Delete.
	* testsuite/gas/i860/dual02-err.s: Delete.
	* testsuite/gas/i860/dual03.d: Delete.
	* testsuite/gas/i860/dual03.s: Delete.
	* testsuite/gas/i860/fldst01.d: Delete.
	* testsuite/gas/i860/fldst01.s: Delete.
	* testsuite/gas/i860/fldst02.d: Delete.
	* testsuite/gas/i860/fldst02.s: Delete.
	* testsuite/gas/i860/fldst03.d: Delete.
	* testsuite/gas/i860/fldst03.s: Delete.
	* testsuite/gas/i860/fldst04.d: Delete.
	* testsuite/gas/i860/fldst04.s: Delete.
	* testsuite/gas/i860/fldst05.d: Delete.
	* testsuite/gas/i860/fldst05.s: Delete.
	* testsuite/gas/i860/fldst06.d: Delete.
	* testsuite/gas/i860/fldst06.s: Delete.
	* testsuite/gas/i860/fldst07.d: Delete.
	* testsuite/gas/i860/fldst07.s: Delete.
	* testsuite/gas/i860/fldst08.d: Delete.
	* testsuite/gas/i860/fldst08.s: Delete.
	* testsuite/gas/i860/float01.d: Delete.
	* testsuite/gas/i860/float01.s: Delete.
	* testsuite/gas/i860/float02.d: Delete.
	* testsuite/gas/i860/float02.s: Delete.
	* testsuite/gas/i860/float03.d: Delete.
	* testsuite/gas/i860/float03.s: Delete.
	* testsuite/gas/i860/float04.d: Delete.
	* testsuite/gas/i860/float04.s: Delete.
	* testsuite/gas/i860/form.d: Delete.
	* testsuite/gas/i860/form.s: Delete.
	* testsuite/gas/i860/i860.exp: Delete.
	* testsuite/gas/i860/iarith.d: Delete.
	* testsuite/gas/i860/iarith.s: Delete.
	* testsuite/gas/i860/ldst01.d: Delete.
	* testsuite/gas/i860/ldst01.s: Delete.
	* testsuite/gas/i860/ldst02.d: Delete.
	* testsuite/gas/i860/ldst02.s: Delete.
	* testsuite/gas/i860/ldst03.d: Delete.
	* testsuite/gas/i860/ldst03.s: Delete.
	* testsuite/gas/i860/ldst04.d: Delete.
	* testsuite/gas/i860/ldst04.s: Delete.
	* testsuite/gas/i860/ldst05.d: Delete.
	* testsuite/gas/i860/ldst05.s: Delete.
	* testsuite/gas/i860/ldst06.d: Delete.
	* testsuite/gas/i860/ldst06.s: Delete.
	* testsuite/gas/i860/pfam.d: Delete.
	* testsuite/gas/i860/pfam.s: Delete.
	* testsuite/gas/i860/pfmam.d: Delete.
	* testsuite/gas/i860/pfmam.s: Delete.
	* testsuite/gas/i860/pfmsm.d: Delete.
	* testsuite/gas/i860/pfmsm.s: Delete.
	* testsuite/gas/i860/pfsm.d: Delete.
	* testsuite/gas/i860/pfsm.s: Delete.
	* testsuite/gas/i860/pseudo-ops01.d: Delete.
	* testsuite/gas/i860/pseudo-ops01.s: Delete.
	* testsuite/gas/i860/regress01.d: Delete.
	* testsuite/gas/i860/regress01.s: Delete.
	* testsuite/gas/i860/shift.d: Delete.
	* testsuite/gas/i860/shift.s: Delete.
	* testsuite/gas/i860/simd.d: Delete.
	* testsuite/gas/i860/simd.s: Delete.
	* testsuite/gas/i860/system.d: Delete.
	* testsuite/gas/i860/system.s: Delete.
	* testsuite/gas/i860/xp.d: Delete.
	* testsuite/gas/i860/xp.s: Delete.
	* Makefile.am: Remove i860 and i960 support.
	* configure.tgt: Likewise.
	* doc/Makefile.am: Likewise.
	* doc/all.texi: Likewise.
	* testsuite/gas/all/gas.exp
	* config/obj-coff.h: Remove i960 support.
	* doc/internals.texi: Likewise.
	* expr.c: Likewise.
	* read.c: Likewise.
	* write.c: Likewise.
	* write.h: Likewise.
	* testsuite/gas/lns/lns.exp: Likewise.
	* testsuite/gas/symver/symver.exp: Likewise.
	* config/tc-m68k.c: Remove BOUT support.
	* config/tc-score.c: Likewise.
	* config/tc-score7.c: Likewise.
	* config/tc-sparc.c: Likewise.
	* symbols.c: Likewise.
	* doc/h8.texi: Likewise.
	* configure.ac: Remove BOUT and i860 support.
	* doc/as.texinfo: Remove BOUT, i860 and i960 support
	* Makefile.in: Regenerate.
	* config.in: Regenerate.
	* configure: Regenerate.
	* doc/Makefile.in: Regenerate.
	* po/POTFILES.in: Regenerate.
ld/
	* emulparams/coff_i860.sh: Delete.
	* emulparams/elf32_i860.sh: Delete.
	* emulparams/elf32_i960.sh: Delete.
	* emulparams/gld960.sh: Delete.
	* emulparams/gld960coff.sh: Delete.
	* emulparams/lnk960.sh: Delete.
	* emultempl/gld960.em: Delete.
	* emultempl/gld960c.em: Delete.
	* emultempl/lnk960.em: Delete.
	* scripttempl/i860coff.sc: Delete.
	* scripttempl/i960.sc: Delete.
	* ld.texinfo: Remove i960 support.
	* Makefile.am: Remove i860 and i960 support.
	* configure.tgt: Likewise.
	* testsuite/ld-discard/extern.d: Likewise.
	* testsuite/ld-discard/start.d: Likewise.
	* testsuite/ld-discard/static.d: Likewise.
	* testsuite/ld-elf/compressed1d.d: Likewise.
	* testsuite/ld-elf/group1.d: Likewise.
	* testsuite/ld-elf/group3b.d: Likewise.
	* testsuite/ld-elf/group8a.d: Likewise.
	* testsuite/ld-elf/group8b.d: Likewise.
	* testsuite/ld-elf/group9a.d: Likewise.
	* testsuite/ld-elf/group9b.d: Likewise.
	* testsuite/ld-elf/linkonce2.d: Likewise.
	* testsuite/ld-elf/merge.d: Likewise.
	* testsuite/ld-elf/merge2.d: Likewise.
	* testsuite/ld-elf/merge3.d: Likewise.
	* testsuite/ld-elf/orphan-10.d: Likewise.
	* testsuite/ld-elf/orphan-11.d: Likewise.
	* testsuite/ld-elf/orphan-12.d: Likewise.
	* testsuite/ld-elf/orphan-9.d: Likewise.
	* testsuite/ld-elf/orphan-region.d: Likewise.
	* testsuite/ld-elf/orphan.d: Likewise.
	* testsuite/ld-elf/orphan3.d: Likewise.
	* testsuite/ld-elf/pr12851.d: Likewise.
	* testsuite/ld-elf/pr12975.d: Likewise.
	* testsuite/ld-elf/pr13177.d: Likewise.
	* testsuite/ld-elf/pr13195.d: Likewise.
	* testsuite/ld-elf/pr17550a.d: Likewise.
	* testsuite/ld-elf/pr17550b.d: Likewise.
	* testsuite/ld-elf/pr17550c.d: Likewise.
	* testsuite/ld-elf/pr17550d.d: Likewise.
	* testsuite/ld-elf/pr17615.d: Likewise.
	* testsuite/ld-elf/pr20528a.d: Likewise.
	* testsuite/ld-elf/pr20528b.d: Likewise.
	* testsuite/ld-elf/pr21562a.d: Likewise.
	* testsuite/ld-elf/pr21562b.d: Likewise.
	* testsuite/ld-elf/pr21562c.d: Likewise.
	* testsuite/ld-elf/pr21562d.d: Likewise.
	* testsuite/ld-elf/pr21562i.d: Likewise.
	* testsuite/ld-elf/pr21562j.d: Likewise.
	* testsuite/ld-elf/pr21562k.d: Likewise.
	* testsuite/ld-elf/pr21562l.d: Likewise.
	* testsuite/ld-elf/pr21562m.d: Likewise.
	* testsuite/ld-elf/pr21562n.d: Likewise.
	* testsuite/ld-elf/pr22677.d: Likewise.
	* testsuite/ld-elf/pr22836-1a.d: Likewise.
	* testsuite/ld-elf/pr22836-1b.d: Likewise.
	* testsuite/ld-elf/pr349.d: Likewise.
	* testsuite/ld-elf/sec-to-seg.exp: Likewise.
	* testsuite/ld-elf/sec64k.exp: Likewise.
	* testsuite/ld-elf/warn1.d: Likewise.
	* testsuite/ld-elf/warn2.d: Likewise.
	* testsuite/ld-elf/warn3.d: Likewise.
	* testsuite/lib/ld-lib.exp: Likewise.
	* Makefile.in: Regenerate.
	* po/BLD-POTFILES.in: Regenerate.

1 files changed, 0 insertions, 666 deletions

diff --git a/bfd/coff-i960.c b/bfd/coff-i960.c
deleted file mode 100644
index 4e68d44..0000000
--- a/bfd/coff-i960.c
+++ /dev/null
@@ -1,666 +0,0 @@
-/* BFD back-end for Intel 960 COFF files.
-   Copyright (C) 1990-2018 Free Software Foundation, Inc.
-   Written by Cygnus Support.
-
-   This file is part of BFD, the Binary File Descriptor library.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 3 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
-   MA 02110-1301, USA.  */
-
-#define I960 1
-#define BADMAG(x) I960BADMAG(x)
-
-#include "sysdep.h"
-#include "bfd.h"
-#include "libbfd.h"
-#include "coff/i960.h"
-#include "coff/internal.h"
-
-#ifndef bfd_pe_print_pdata
-#define bfd_pe_print_pdata	NULL
-#endif
-
-#include "libcoff.h"		/* To allow easier abstraction-breaking.  */
-
-
-#define COFF_DEFAULT_SECTION_ALIGNMENT_POWER (3)
-#define COFF_ALIGN_IN_SECTION_HEADER 1
-
-#define GET_SCNHDR_ALIGN H_GET_32
-#define PUT_SCNHDR_ALIGN H_PUT_32
-
-/* The i960 does not support an MMU, so COFF_PAGE_SIZE can be
-   arbitrarily small.  */
-#define COFF_PAGE_SIZE 1
-
-#define COFF_LONG_FILENAMES
-
-/* This set of local label names is taken from gas.  */
-
-static bfd_boolean
-coff_i960_is_local_label_name (bfd *abfd ATTRIBUTE_UNUSED, const char *name)
-{
-  return (name[0] == 'L'
-	  || (name[0] == '.'
-	      && (name[1] == 'C'
-		  || name[1] == 'I'
-		  || name[1] == '.')));
-}
-
-/* This is just like the usual CALC_ADDEND, but it includes the
-   section VMA for PC relative relocs.  */
-#ifndef CALC_ADDEND
-#define CALC_ADDEND(abfd, ptr, reloc, cache_ptr)		\
-  {								\
-    coff_symbol_type *coffsym = (coff_symbol_type *) NULL;	\
-    if (ptr && bfd_asymbol_bfd (ptr) != abfd)			\
-      coffsym = (obj_symbols (abfd)				\
-		 + (cache_ptr->sym_ptr_ptr - symbols));		\
-    else if (ptr)						\
-      coffsym = coff_symbol_from (ptr);				\
-    if (coffsym != (coff_symbol_type *) NULL			\
-	&& coffsym->native->u.syment.n_scnum == 0)		\
-      cache_ptr->addend = 0;					\
-    else if (ptr && bfd_asymbol_bfd (ptr) == abfd		\
-	     && ptr->section != (asection *) NULL)		\
-      cache_ptr->addend = - (ptr->section->vma + ptr->value);	\
-    else							\
-      cache_ptr->addend = 0;					\
-    if (ptr && (reloc.r_type == 25 || reloc.r_type == 27))	\
-      cache_ptr->addend += asect->vma;				\
-  }
-#endif
-
-#define CALLS	 0x66003800	/* Template for 'calls' instruction	*/
-#define BAL	 0x0b000000	/* Template for 'bal' instruction	*/
-#define BAL_MASK 0x00ffffff
-
-static bfd_reloc_status_type
-optcall_callback (bfd *abfd,
-		  arelent *reloc_entry,
-		  asymbol *symbol_in,
-		  void * data,
-		  asection *input_section,
-		  bfd *ignore_bfd ATTRIBUTE_UNUSED,
-		  char **error_message)
-{
-  /* This item has already been relocated correctly, but we may be
-   * able to patch in yet better code - done by digging out the
-   * correct info on this symbol */
-  bfd_reloc_status_type result;
-  coff_symbol_type *cs = coffsymbol(symbol_in);
-
-  /* Don't do anything with symbols which aren't tied up yet,
-     except move the reloc.  */
-  if (bfd_is_und_section (cs->symbol.section)) {
-    reloc_entry->address += input_section->output_offset;
-    return bfd_reloc_ok;
-  }
-
-  /* So the target symbol has to be of coff type, and the symbol
-     has to have the correct native information within it */
-  if ((bfd_asymbol_flavour(&cs->symbol) != bfd_target_coff_flavour)
-      || (cs->native == (combined_entry_type *)NULL))
-    {
-      /* This is interesting, consider the case where we're outputting coff
-	 from a mix n match input, linking from coff to a symbol defined in a
-	 bout file will cause this match to be true. Should I complain?  This
-	 will only work if the bout symbol is non leaf.  */
-      *error_message =
-	(char *) _("uncertain calling convention for non-COFF symbol");
-      result = bfd_reloc_dangerous;
-    }
-  else
-    {
-    switch (cs->native->u.syment.n_sclass)
-      {
-      case C_LEAFSTAT:
-      case C_LEAFEXT:
-	/* This is a call to a leaf procedure, replace instruction with a bal
-	   to the correct location.  */
-	{
-	  union internal_auxent *aux = &((cs->native+2)->u.auxent);
-	  int word = bfd_get_32 (abfd, (bfd_byte *)data + reloc_entry->address);
-	  int olf = (aux->x_bal.x_balntry - cs->native->u.syment.n_value);
-	  BFD_ASSERT(cs->native->u.syment.n_numaux==2);
-
-	  /* We replace the original call instruction with a bal to
-	     the bal entry point - the offset of which is described in
-	     the 2nd auxent of the original symbol. We keep the native
-	     sym and auxents untouched, so the delta between the two
-	     is the offset of the bal entry point.  */
-	  word = ((word +  olf)  & BAL_MASK) | BAL;
-	  bfd_put_32 (abfd, (bfd_vma) word,
-		      (bfd_byte *) data + reloc_entry->address);
-	}
-	result = bfd_reloc_ok;
-	break;
-      case C_SCALL:
-	/* This is a call to a system call, replace with a calls to # */
-	BFD_ASSERT(0);
-	result = bfd_reloc_ok;
-	break;
-      default:
-	result = bfd_reloc_ok;
-	break;
-      }
-  }
-  return result;
-}
-
-/* i960 COFF is used by VxWorks 5.1.  However, VxWorks 5.1 does not
-   appear to correctly handle a reloc against a symbol defined in the
-   same object file.  It appears to simply discard such relocs, rather
-   than adding their values into the object file.  We handle this here
-   by converting all relocs against defined symbols into relocs
-   against the section symbol, when generating a relocatable output
-   file.
-
-   Note that this function is only called if we are not using the COFF
-   specific backend linker.  It only does something when doing a
-   relocatable link, which will almost certainly fail when not
-   generating COFF i960 output, so this function is actually no longer
-   useful.  It was used before this target was converted to use the
-   COFF specific backend linker.  */
-
-static bfd_reloc_status_type
-coff_i960_relocate (bfd *abfd,
-		    arelent *reloc_entry,
-		    asymbol *symbol,
-		    void * data ATTRIBUTE_UNUSED,
-		    asection *input_section ATTRIBUTE_UNUSED,
-		    bfd *output_bfd,
-		    char **error_message ATTRIBUTE_UNUSED)
-{
-  asection *osec;
-
-  if (output_bfd == NULL)
-    {
-      /* Not generating relocatable output file.  */
-      return bfd_reloc_continue;
-    }
-
-  if (bfd_is_und_section (bfd_get_section (symbol)))
-    {
-      /* Symbol is not defined, so no need to worry about it.  */
-      return bfd_reloc_continue;
-    }
-
-  if (bfd_is_com_section (bfd_get_section (symbol)))
-    {
-      /* I don't really know what the right action is for a common
-	 symbol.  */
-      return bfd_reloc_continue;
-    }
-
-  /* Convert the reloc to use the section symbol.  FIXME: This method
-     is ridiculous.  */
-  osec = bfd_get_section (symbol)->output_section;
-  if (coff_section_data (output_bfd, osec) != NULL
-      && coff_section_data (output_bfd, osec)->tdata != NULL)
-    reloc_entry->sym_ptr_ptr =
-      (asymbol **) coff_section_data (output_bfd, osec)->tdata;
-  else
-    {
-      const char *sec_name;
-      asymbol **syms, **sym_end;
-
-      sec_name = bfd_get_section_name (output_bfd, osec);
-      syms = bfd_get_outsymbols (output_bfd);
-      sym_end = syms + bfd_get_symcount (output_bfd);
-      for (; syms < sym_end; syms++)
-	{
-	  if (bfd_asymbol_name (*syms) != NULL
-	      && (*syms)->value == 0
-	      && strcmp ((*syms)->section->output_section->name,
-			 sec_name) == 0)
-	    break;
-	}
-
-      if (syms >= sym_end)
-	abort ();
-
-      reloc_entry->sym_ptr_ptr = syms;
-
-      if (coff_section_data (output_bfd, osec) == NULL)
-	{
-	  bfd_size_type amt = sizeof (struct coff_section_tdata);
-	  osec->used_by_bfd = bfd_zalloc (abfd, amt);
-	  if (osec->used_by_bfd == NULL)
-	    return bfd_reloc_overflow;
-	}
-      coff_section_data (output_bfd, osec)->tdata = syms;
-    }
-
-  /* Let bfd_perform_relocation do its thing, which will include
-     stuffing the symbol addend into the object file.  */
-  return bfd_reloc_continue;
-}
-
-static reloc_howto_type howto_rellong =
-  HOWTO ((unsigned int) R_RELLONG, 0, 2, 32,FALSE, 0,
-	 complain_overflow_bitfield, coff_i960_relocate,"rellong", TRUE,
-	 0xffffffff, 0xffffffff, 0);
-static reloc_howto_type howto_iprmed =
-  HOWTO (R_IPRMED, 0, 2, 24,TRUE,0, complain_overflow_signed,
-	 coff_i960_relocate, "iprmed ", TRUE, 0x00ffffff, 0x00ffffff, 0);
-static reloc_howto_type howto_optcall =
-  HOWTO (R_OPTCALL, 0,2,24,TRUE,0, complain_overflow_signed,
-	 optcall_callback, "optcall", TRUE, 0x00ffffff, 0x00ffffff, 0);
-
-static reloc_howto_type *
-coff_i960_reloc_type_lookup (bfd *abfd ATTRIBUTE_UNUSED,
-			     bfd_reloc_code_real_type code)
-{
-  switch (code)
-    {
-    default:
-      return 0;
-    case BFD_RELOC_I960_CALLJ:
-      return &howto_optcall;
-    case BFD_RELOC_32:
-    case BFD_RELOC_CTOR:
-      return &howto_rellong;
-    case BFD_RELOC_24_PCREL:
-      return &howto_iprmed;
-    }
-}
-
-static reloc_howto_type *
-coff_i960_reloc_name_lookup (bfd *abfd ATTRIBUTE_UNUSED,
-			     const char *r_name)
-{
-  if (strcasecmp (howto_optcall.name, r_name) == 0)
-    return &howto_optcall;
-  if (strcasecmp (howto_rellong.name, r_name) == 0)
-    return &howto_rellong;
-  if (strcasecmp (howto_iprmed.name, r_name) == 0)
-    return &howto_iprmed;
-
-  return NULL;
-}
-
-/* The real code is in coffcode.h */
-
-#define RTYPE2HOWTO(cache_ptr, dst) \
-{							\
-   reloc_howto_type *howto_ptr;				\
-   switch ((dst)->r_type) {				\
-     case 17: howto_ptr = &howto_rellong; break;	\
-     case 25: howto_ptr = &howto_iprmed; break;		\
-     case 27: howto_ptr = &howto_optcall; break;	\
-     default: howto_ptr = 0; break;			\
-     }							\
-   (cache_ptr)->howto = howto_ptr;			\
- }
-
-/* i960 COFF is used by VxWorks 5.1.  However, VxWorks 5.1 does not
-   appear to correctly handle a reloc against a symbol defined in the
-   same object file.  It appears to simply discard such relocs, rather
-   than adding their values into the object file.  We handle this by
-   converting all relocs against global symbols into relocs against
-   internal symbols at the start of the section.  This routine is
-   called at the start of the linking process, and it creates the
-   necessary symbols.  */
-
-static bfd_boolean
-coff_i960_start_final_link (bfd *abfd, struct bfd_link_info *info)
-{
-  bfd_size_type symesz = bfd_coff_symesz (abfd);
-  asection *o;
-  bfd_byte *esym;
-
-  if (! bfd_link_relocatable (info))
-    return TRUE;
-
-  esym = (bfd_byte *) bfd_malloc (symesz);
-  if (esym == NULL)
-    return FALSE;
-
-  if (bfd_seek (abfd, obj_sym_filepos (abfd), SEEK_SET) != 0)
-    return FALSE;
-
-  for (o = abfd->sections; o != NULL; o = o->next)
-    {
-      struct internal_syment isym;
-
-      strncpy (isym._n._n_name, o->name, SYMNMLEN);
-      isym.n_value = 0;
-      isym.n_scnum = o->target_index;
-      isym.n_type = T_NULL;
-      isym.n_sclass = C_STAT;
-      isym.n_numaux = 0;
-
-      bfd_coff_swap_sym_out (abfd, &isym, esym);
-
-      if (bfd_bwrite (esym, symesz, abfd) != symesz)
-	{
-	  free (esym);
-	  return FALSE;
-	}
-
-      obj_raw_syment_count (abfd) += 1;
-    }
-
-  free (esym);
-
-  return TRUE;
-}
-
-/* The reloc processing routine for the optimized COFF linker.  */
-
-static bfd_boolean
-coff_i960_relocate_section (bfd *output_bfd ATTRIBUTE_UNUSED,
-			    struct bfd_link_info *info,
-			    bfd *input_bfd,
-			    asection *input_section,
-			    bfd_byte *contents,
-			    struct internal_reloc *relocs,
-			    struct internal_syment *syms,
-			    asection **sections)
-{
-  struct internal_reloc *rel;
-  struct internal_reloc *relend;
-
-  rel = relocs;
-  relend = rel + input_section->reloc_count;
-  for (; rel < relend; rel++)
-    {
-      long symndx;
-      struct coff_link_hash_entry *h;
-      struct internal_syment *sym;
-      bfd_vma addend;
-      bfd_vma val;
-      reloc_howto_type *howto;
-      bfd_reloc_status_type rstat = bfd_reloc_ok;
-      bfd_boolean done;
-
-      symndx = rel->r_symndx;
-
-      if (symndx == -1)
-	{
-	  h = NULL;
-	  sym = NULL;
-	}
-      else
-	{
-	  h = obj_coff_sym_hashes (input_bfd)[symndx];
-	  sym = syms + symndx;
-	}
-
-      if (sym != NULL && sym->n_scnum != 0)
-	addend = - sym->n_value;
-      else
-	addend = 0;
-
-      switch (rel->r_type)
-	{
-	case 17: howto = &howto_rellong; break;
-	case 25: howto = &howto_iprmed; break;
-	case 27: howto = &howto_optcall; break;
-	default:
-	  bfd_set_error (bfd_error_bad_value);
-	  return FALSE;
-	}
-
-      val = 0;
-
-      if (h == NULL)
-	{
-	  asection *sec;
-
-	  if (symndx == -1)
-	    {
-	      sec = bfd_abs_section_ptr;
-	      val = 0;
-	    }
-	  else
-	    {
-	      sec = sections[symndx];
-	      val = (sec->output_section->vma
-		     + sec->output_offset
-		     + sym->n_value
-		     - sec->vma);
-	    }
-	}
-      else
-	{
-	  if (h->root.type == bfd_link_hash_defined
-	      || h->root.type == bfd_link_hash_defweak)
-	    {
-	      asection *sec;
-
-	      sec = h->root.u.def.section;
-	      val = (h->root.u.def.value
-		     + sec->output_section->vma
-		     + sec->output_offset);
-	    }
-	  else if (! bfd_link_relocatable (info))
-	    (*info->callbacks->undefined_symbol)
-	      (info, h->root.root.string, input_bfd, input_section,
-	       rel->r_vaddr - input_section->vma, TRUE);
-	}
-
-      done = FALSE;
-
-      if (howto->type == R_OPTCALL && ! bfd_link_relocatable (info) && symndx != -1)
-	{
-	  int class_val;
-
-	  if (h != NULL)
-	    class_val = h->symbol_class;
-	  else
-	    class_val = sym->n_sclass;
-
-	  switch (class_val)
-	    {
-	    case C_NULL:
-	      /* This symbol is apparently not from a COFF input file.
-		 We warn, and then assume that it is not a leaf
-		 function.  */
-	      (*info->callbacks->reloc_dangerous)
-		(info,
-		 _("uncertain calling convention for non-COFF symbol"),
-		 input_bfd, input_section,
-		 rel->r_vaddr - input_section->vma);
-	      break;
-	    case C_LEAFSTAT:
-	    case C_LEAFEXT:
-	      /* This is a call to a leaf procedure; use the bal
-		 instruction.  */
-	      {
-		long olf;
-		unsigned long word;
-
-		if (h != NULL)
-		  {
-		    BFD_ASSERT (h->numaux == 2);
-		    olf = h->aux[1].x_bal.x_balntry;
-		  }
-		else
-		  {
-		    bfd_byte *esyms;
-		    union internal_auxent aux;
-
-		    BFD_ASSERT (sym->n_numaux == 2);
-		    esyms = (bfd_byte *) obj_coff_external_syms (input_bfd);
-		    esyms += (symndx + 2) * bfd_coff_symesz (input_bfd);
-		    bfd_coff_swap_aux_in (input_bfd, esyms, sym->n_type,
-					  sym->n_sclass, 1, sym->n_numaux,
-					  &aux);
-		    olf = aux.x_bal.x_balntry;
-		  }
-
-		word = bfd_get_32 (input_bfd,
-				   (contents
-				    + (rel->r_vaddr - input_section->vma)));
-		word = ((word + olf - val) & BAL_MASK) | BAL;
-		bfd_put_32 (input_bfd,
-			    (bfd_vma) word,
-			    contents + (rel->r_vaddr - input_section->vma));
-		done = TRUE;
-	      }
-	      break;
-	    case C_SCALL:
-	      BFD_ASSERT (0);
-	      break;
-	    }
-	}
-
-      if (! done)
-	{
-	  if (howto->pc_relative)
-	    addend += input_section->vma;
-	  rstat = _bfd_final_link_relocate (howto, input_bfd, input_section,
-					    contents,
-					    rel->r_vaddr - input_section->vma,
-					    val, addend);
-	}
-
-      switch (rstat)
-	{
-	default:
-	  abort ();
-	case bfd_reloc_ok:
-	  break;
-	case bfd_reloc_overflow:
-	  {
-	    const char *name;
-	    char buf[SYMNMLEN + 1];
-
-	    if (symndx == -1)
-	      name = "*ABS*";
-	    else if (h != NULL)
-	      name = NULL;
-	    else
-	      {
-		name = _bfd_coff_internal_syment_name (input_bfd, sym, buf);
-		if (name == NULL)
-		  return FALSE;
-	      }
-
-	    (*info->callbacks->reloc_overflow)
-	      (info, (h ? &h->root : NULL), name, howto->name,
-	       (bfd_vma) 0, input_bfd, input_section,
-	       rel->r_vaddr - input_section->vma);
-	  }
-	}
-    }
-
-  return TRUE;
-}
-
-/* Adjust the symbol index of any reloc against a global symbol to
-   instead be a reloc against the internal symbol we created specially
-   for the section.  */
-
-static bfd_boolean
-coff_i960_adjust_symndx (bfd *obfd ATTRIBUTE_UNUSED,
-			 struct bfd_link_info *info ATTRIBUTE_UNUSED,
-			 bfd *ibfd,
-			 asection *sec ATTRIBUTE_UNUSED,
-			 struct internal_reloc *irel,
-			 bfd_boolean *adjustedp)
-{
-  struct coff_link_hash_entry *h;
-
-  *adjustedp = FALSE;
-
-  h = obj_coff_sym_hashes (ibfd)[irel->r_symndx];
-  if (h == NULL
-      || (h->root.type != bfd_link_hash_defined
-	  && h->root.type != bfd_link_hash_defweak))
-    return TRUE;
-
-  irel->r_symndx = h->root.u.def.section->output_section->target_index - 1;
-  *adjustedp = TRUE;
-
-  return TRUE;
-}
-
-#define coff_bfd_is_local_label_name coff_i960_is_local_label_name
-
-#define coff_start_final_link coff_i960_start_final_link
-
-#define coff_relocate_section coff_i960_relocate_section
-
-#define coff_adjust_symndx coff_i960_adjust_symndx
-
-#define coff_bfd_reloc_type_lookup coff_i960_reloc_type_lookup
-#define coff_bfd_reloc_name_lookup coff_i960_reloc_name_lookup
-
-#include "coffcode.h"
-
-extern const bfd_target icoff_be_vec;
-
-CREATE_LITTLE_COFF_TARGET_VEC (icoff_le_vec, "coff-Intel-little", 0, 0, '_', & icoff_be_vec, COFF_SWAP_TABLE)
-
-const bfd_target icoff_be_vec =
-{
-  "coff-Intel-big",		/* name */
-  bfd_target_coff_flavour,
-  BFD_ENDIAN_LITTLE,		/* data byte order is little */
-  BFD_ENDIAN_BIG,		/* header byte order is big */
-
-  (HAS_RELOC | EXEC_P		/* object flags */
-   | HAS_LINENO | HAS_DEBUG
-   | HAS_SYMS | HAS_LOCALS | WP_TEXT),
-
-  (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC), /* section flags */
-  '_',				/* leading underscore */
-  '/',				/* ar_pad_char */
-  15,				/* ar_max_namelen */
-  0,				/* match priority.  */
-
-  bfd_getl64, bfd_getl_signed_64, bfd_putl64,
-     bfd_getl32, bfd_getl_signed_32, bfd_putl32,
-     bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* data */
-  bfd_getb64, bfd_getb_signed_64, bfd_putb64,
-     bfd_getb32, bfd_getb_signed_32, bfd_putb32,
-     bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* hdrs */
-
-  {				/* bfd_check_format */
-    _bfd_dummy_target,
-    coff_object_p,
-    bfd_generic_archive_p,
-    _bfd_dummy_target
-  },
-  {				/* bfd_set_format */
-    _bfd_bool_bfd_false_error,
-    coff_mkobject,
-    _bfd_generic_mkarchive,
-    _bfd_bool_bfd_false_error
-  },
-  {				/* bfd_write_contents */
-    _bfd_bool_bfd_false_error,
-    coff_write_object_contents,
-    _bfd_write_archive_contents,
-    _bfd_bool_bfd_false_error
-  },
-
-  BFD_JUMP_TABLE_GENERIC (coff),
-  BFD_JUMP_TABLE_COPY (coff),
-  BFD_JUMP_TABLE_CORE (_bfd_nocore),
-  BFD_JUMP_TABLE_ARCHIVE (_bfd_archive_coff),
-  BFD_JUMP_TABLE_SYMBOLS (coff),
-  BFD_JUMP_TABLE_RELOCS (coff),
-  BFD_JUMP_TABLE_WRITE (coff),
-  BFD_JUMP_TABLE_LINK (coff),
-  BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
-
-  &icoff_le_vec,
-
-  COFF_SWAP_TABLE
-};