Initial creation of sourceware repository

1 files changed, 0 insertions, 983 deletions

diff --git a/Install.in b/Install.in
deleted file mode 100755
index fc3433a..0000000
--- a/Install.in
+++ /dev/null
@@ -1,983 +0,0 @@
-#!/bin/sh
-### Copyright (C) 1991, 1992, Cygnus Support
-### All Rights Reserved.
-
-### This really needs to nestle up snuggly to the Release notes.  If you change
-### this script, please be sure the release notes get coordinated too.
-
-set -e
-
-### this is our version number.
-VERSION=cygnus-sol2-||RELNO||
-
-### this is the default installation repository. We use this to test whether or
-### not GCC_EXEC_PREFIX should be set when doing "Install test comp-tools".
-#INSTALLDIR_DEFAULT=/giga/rich/tmp/installdir
-INSTALLDIR_REAL=/opt
-INSTALLDIR_DEFAULT=${INSTALLDIR_REAL}
-### this is where we install into.  (useful for testing).
-INSTALLDIR=${INSTALLDIR_DEFAULT}
-
-### where to write the log files
-LOGDIR=${INSTALLDIR}/${VERSION}
-
-### who to call in bad situations
-HOTLINE="the Cygnus Support Hotline at +1 415 322 7836"
-
-### what the release doc is called and a few sections thereof
-NOTES="the Installation Notes"
-CHANGING_PATHS="\"Changing the Paths\""
-NO_ACCESS="\"No Access to ${INSTALLDIR}\?\""
-MIGHT_WRONG="\"Some Things that Might go Wrong\""
-WHY_FIXINCLUDES="Why Convert System Header Files\?"
-ANOTHER_TAPE="\"Steps to install with another machine\'s tape drive\""
-
-### for debugging
-#PATH=/bin:/usr/bin ; export PATH
-
-### default the tape device
-case "${TAPE}" in
-  "") TAPE=||DEVdflt|| 
-      ;;
-  *) 
-      ;;
-esac # ${TAPE}
-
-### clear and/or initialize some variables
-ARCH=
-TOOLS=
-FTPRELEASE=no
-
-REMOVE=no
-EXTRACT=no
-FIXINCLUDES=no
-TESTINSTALLATION=no
-
-INSTALLHOST=default
-ERROR=
-
-### where the binaries are in the release
-#EXECDIR=${VERSION}/H-${INSTALLHOST}
-EXECDIR=${VERSION}
-
-### some tool defaults
-### perhaps these should be hard coded to absolute paths instead?
-TAR=tar
-TARKEYS="xvvopf -"
-SED=sed
-MT=mt
-
-### trigger words on the command line are:
-###     bin, src
-###     emacs, comp-tools
-###     -tape=/dev/device
-###     -installdir=/foo
-###     extract, fixincludes, test-installation, remove
-
-for arg in $* ; do
-        case "${arg}" in
-### options
-        -tape=* | --tape=* | --tap=* | --ta=* | --t=*)
-                TAPE=`echo ${arg} | ${SED} 's/-*t[a-z]*=//'`
-                ;;
-
-        -installdir=* | --installdir=* | --installdi=* | --installd=* | --install=* | --instal=* | --insta=* | --inst=* | --ins=* | --in=* | --i=*)
-                INSTALLDIR=`echo ${arg} | ${SED} 's/-*i[a-z]*=//'`
-		# we will make it an absolute path shortly.
-                ;;
-
-### actions
-        *remove* | rm | -rm | --rm)     ACTIONS="${ACTIONS} rm" ;;
-        *extract*)      ACTIONS="${ACTIONS} extract" ;;
-        *fix*)          ACTIONS="${ACTIONS} fix" ;;
-        *test*)         ACTIONS="${ACTIONS} test" ;;
-### hosts
-        *src* | *sour*) ARCH="${ARCH} src" ;;
-        *bin*)          ARCH="${ARCH} bin" ;;
-
-### packages
-        *emacs*)        TOOLS="${TOOLS} emacs" ;;
-        *comp*)         TOOLS="${TOOLS} comp" ;;
-        *help*) ERROR=true ;;
-        *)
-                echo '***' I do not understand the option \"${arg}\".
-                ERROR=true
-                ;;
-        esac # ${arg}
-done # arg in $*
-
-###
-###
-### check for a myriad of sins
-###
-###
-
-if [ ! -d "${INSTALLDIR}" ] ; then
-	echo '*** ' Can not cd to \"${INSTALLDIR}\" because it does not exist.
-	echo '*** ' Try creating it with \"mkdir ${INSTALLDIR}\" and then try running Install again.
-	exit 1
-else
-	if (cd "${INSTALLDIR}") ; then 
-		true
-	else
-		echo '*** ' Can not cd to \"${INSTALLDIR}\" because I do not have execute permission.
-		ls -lad ${INSTALLDIR}
-		echo '*** ' Please fix this and then try running Install again.
-		exit 1
-	fi   # ! cd ${INSTALLDIR}
-fi   # ! -d ${INSTALLDIR}
-
-# Make INSTALLDIR absolute (parts below might need it that way).
-# FIXME, do they really?
-# FIXME, handle pwd failure from upper dir permission
-INSTALLDIR=`cd ${INSTALLDIR} ; pwd`
-LOGDIR=${INSTALLDIR}/${VERSION}
-
-case "${ERROR}" in
-  "")
-### default tools
-        case "${TOOLS}" in
-          "") TOOLS="||BUNDLE||" ;;
-          *) ;;
-        esac # ${TOOLS}
-
-        INSTALLHOST=
-
-### decide where we are: try arch first.
-        if (arch) > /dev/null 2>&1 ; then
-                MAYBE=`arch`
-        else
-                true
-        fi # (arch)
-
-        case "${MAYBE}" in
-          sun3) INSTALLHOST=${MAYBE} 
-		;;
-          *)
-### next try uname
-                if (uname > /dev/null) 2>&1 ; then
-                        UNAME=`echo \`uname -s\`\`uname -m\`\`uname -r\``
-                else
-                        UNAME="machine without a uname command (type of machine unknown)"
-                fi # (uname)
-
-### map into names we recognize
-                case "${UNAME}" in
-                  AIX*)
-                  	INSTALLHOST=rs6000
-                        MT=tctl
-                        ;;
-                  ULTRIXRISC)     INSTALLHOST=decstation ;;
-                  SunOSsun4*5*)   INSTALLHOST=sparc-sun-solaris2 ;;
-                  SunOSsun4*)     INSTALLHOST=sun4 ;;
-                  SunOSsun3*)     INSTALLHOST=sun3 ;;
-                  IRIX*)          INSTALLHOST=iris4 ;;
-                  *)              INSTALLHOST=unknown ;;
-                esac # ${UNAME}
-                ;;
-        esac # ${MAYBE}
-
-### default arch
-        case "${ARCH}" in
-          "")     ARCH="bin src" ;;
-          *) ;;
-        esac # ${ARCH}
-
-### default actions
-
-        case "${ACTIONS}" in
-          "")
-                case "${FTPRELEASE}" in
-                  "yes") ACTIONS="test" ;;
-                  "no" ) ACTIONS="extract test" ;;
-                esac # ${FTPRELEASE}
-
-
-### fixincludes only if comp-tools
-                for tool in ${TOOLS} ; do
-                        case ${tool} in
-                          comp)
-                                if echo ${ARCH} | grep bin > /dev/null 2>&1 ; then
-                                        ACTIONS="${ACTIONS} fix"
-                                fi
-                                ;;
-                          *) ;;
-                        esac # ${TOOLS}
-                done # for tool in ${TOOLS}
-                ;;
-        *) ;;
-        esac # ${ACTIONS}
-        ;;
-  *) ;;
-esac  # ${ERROR}
-
-case "${ERROR}" in
-  "")
-### if binaries are not intended for this machine
-        case "${INSTALLHOST}" in
-        "||HOSTstr||") ### binaries are intended for this machine
-                for action in ${ACTIONS} ; do
-                        case ${action} in
-                        test)
-                                for tool in ${TOOLS} ; do
-					OURWD=`(cd ${INSTALLDIR}; pwd) 2>/dev/null`
-					DEFAULTWD=`(cd ${INSTALLDIR_REAL}; pwd) 2>/dev/null`
-                                        case ${tool} in
-                                        comp)
-                                                case "${OURWD}" in
-                                                  "${DEFAULTWD}") ;;
-                                                  *)
-        echo '***' If you want to use the compilation tools in an alternate
-        echo '***   ' directory, GCC_EXEC_PREFIX must be set.  You probably
-        echo '***   ' want to set it with:
-        echo GCC_EXEC_PREFIX=${INSTALLDIR}/${EXECDIR}/lib/gcc-lib/||HOSTstr||/||GCCvn||/ ; export GCC_EXEC_PREFIX
-        GCC_EXEC_PREFIX=${INSTALLDIR}/${EXECDIR}/lib/gcc-lib/||HOSTstr||/||GCCvn||/ ; export GCC_EXEC_PREFIX
-        echo '***   ' This is what I will use for the installation tests.
-						   # skip C++ msg on Solaris
-						   case "${INSTALLHOST}" in
-						   sparc-sun-solaris2) ;;
-						   *)
-        echo '***   ' And for g++ I will use the options:
-        echo '***   '   -I${INSTALLDIR}/${EXECDIR}/lib/g++-include
-        echo '***   '        -L${INSTALLDIR}/${EXECDIR}/lib
-							;;
-						   esac # ${INSTALLHOST}
-        echo '***   ' For further help, please refer to ${CHANGING_PATHS}
-        echo '***   ' in ${NOTES}.
-
-        GPLUSOPTIONS="-I${INSTALLDIR}/${EXECDIR}/lib/g++-include -L${INSTALLDIR}/${EXECDIR}/lib"
-                                                  ;;
-                                                esac # ${INSTALLDIR}
-                                                ;;
-                                        emacs)
-                                                case "${OURWD}" in
-                                                  "${DEFAULTWD}") ;;
-                                                  *)
-                                                        echo '***' I cannot test Emacs.
-                                                        echo '***   ' The provided Emacs binary can only run from the default
-                                                        echo '***   ' installation directory.  If you wish to run emacs, please
-                                                        echo '***   ' refer to ${CHANGING_PATHS} in ${NOTES}.
-                                                        exit 1
-                                                        ;;
-                                                esac # ${INSTALLDIR}
-                                                ;;
-                                          *) true ;;
-                                        esac # ${tool}
-                                done # for tool in ${TOOLS}
-                                ;;
-                          *) true ;;
-                        esac # ${action}
-                done # for action in ${ACTIONS}
-                ;;
-
-        *)
-                for action in ${ACTIONS} ; do
-                        case ${action} in
-                          rm | extract)   true ;;
-                          fix)
-                                if echo ${TOOLS} | grep comp > /dev/null ; then
-                                        NOTFIXED="fixincludes"
-                                        if echo ${ACTIONS} | grep test > /dev/null ; then
-                                                JOINER=" or "
-                                        else
-                                                true
-                                        fi # echo ${ACTIONS}
-                                else
-#                                       echo '***' If you only install Emacs you do not need to run fixincludes.
-#                                       ERROR=true
-                                        true
-                                fi # echo ${TOOLS}
-                                ;;
-                          test)   NOTTESTED="the installation tests" ;;
-                        esac # ${action}
-                done # for action in ${ACTIONS}
-                ;;
-        esac # ${INSTALLHOST}
-        ;;
-  *) ;;
-esac # ${ERROR}
-
-if [ -n "${NOTFIXED}" -o -n "${NOTTESTED}" ] ; then
-        case "${INSTALLHOST}" in
-          "||HOSTstr||") ;;
-          *)
-                echo '***   ' This machine appears to be a \"${INSTALLHOST}\".
-                echo '***   ' You may still run \"$0 -extract ...\" on this machine and then
-                echo '***   ' run the other steps on the machine on which you wish to install.
-                echo '***   ' You will need to do these steps separately.
-                echo '***   ' For more information, please refer to
-                echo '***   ' ${ANOTHER_TAPE} in ${NOTES}.
-                ERROR=true
-                ;;
-        esac # ${INSTALLHOST}
-fi # [ -n ${NOTFIXED -o -n ${NOTTESTED} ]
-
-### if we can't read the tape drive...
-popdir=`pwd`
-
-if [ ! -d "${LOGDIR}" ] ; then
-	if mkdir ${LOGDIR}; then
-		true
-	else
-		echo '*** ' Can not write logs to \"${LOGDIR}\" because it does not exist.
-		echo '*** ' Try creating it with \"mkdir ${LOGDIR}\" and then try running Install again.
-		exit 1
-	fi
-else
-        if [ ! -w "${LOGDIR}" ] ; then
-                echo '*** ' Can not write logs to \"${LOGDIR}\" because I do not have write permission.
-                ls -lad ${LOGDIR}
-                echo '*** ' Please fix this and then try running Install again.
-                exit 1
-        fi   # ! -r ${LOGDIR}
-fi   # ! -d ${LOGDIR}
-
-
-cd ${INSTALLDIR}
-
-### There is a window here that I don't know how to handle gracefully from
-### shell.  If the directory DID exist and WAS executable but dissappeared
-### before we could cd into it, we're kinda hosed.  If you get a call about
-### this, make sure the directory exists, is readable, is executable, is the
-### either the default installation directory or the -installdir=directory
-### given on the command line.  Then ask them to just try again.  A few times.
-### If you get the same error every time, we've got a very strange bug.  I
-### can't help you.
-
-if [ "$?" != "0" ] ; then
-        echo '***' Cannot cd to \"${INSTALLDIR}\".  This is a problem.
-        echo '***   ' For further help, please refer to
-        echo '***   ' ${NO_ACCESS} in ${NOTES} or call
-        echo '***   ' ${HOTLINE}
-        exit 1
-fi
-
-if echo ${ACTIONS} | grep extract > /dev/null ; then
-        if [ -z "${ERROR}" -a ! -r "${TAPE}" ] ; then
-        ### try checking for a relative tape path
-                if [ -r ${popdir}/${TAPE} ] ; then
-                        TAPE=${popdir}/${TAPE}
-                        echo '***' Using TAPE device \"${TAPE}\".
-                else
-                        echo '***' Can not read from TAPE device, \"${TAPE}\".
-                        cd ${popdir} ; ls -lasd ${TAPE}
-                        echo '***   ' Try using \"./Install -tape=/dev/something ...\" to name your tape
-                        echo '***   ' drive or refer to ${MIGHT_WRONG} in
-                        echo '***   ' ${NOTES}.
-                        exit 1
-                fi  # ! -r ${popdir}/${TAPE}
-        fi   # -z ${ERROR}
-fi   # extract in ${ACTIONS}
-
-cd ${popdir}
-
-### bail out
-
-case "${ERROR}" in
-"") ;;
-*)
-        cat <<EOF
-You may supply at least one format on the command line.  Recognized formats
-are:
-    binaries    for binaries
-    source      for source code
-The default is both source and binaries.
-
-You may also supply actions.  Recognized actions are:
-    extract     read the appropriate files from tape
-    fixincludes build a directory of corrected header files for comp-tools 
-    test        run a very brief verification of your installation
-Default actions are extract, fixincludes, and test, although fixincludes is not
-necessary for emacs.
-
-There are two other options:
-    -tape=DEVICE   asks Install to read the necessary files from DEVICE. The
-                   default DEVICE is ||DEVdflt||, the ||TAPdflt||, cartridge tape
-                   drive on most ||HOSTstr||s.
-    -installdir=DIRECTORY       asks Install to install files into DIRECTORY.
-                                The default DIRECTORY is ${INSTALLDIR_DEFAULT}.
-No action has been taken.
-EOF
-        exit 1
-        ;;
-esac
-
-
-###
-###
-### build a file list
-###     (easy this round because we have only one package).
-###
-
-FILE_LIST=
-TRIGGERS=
-
-for arch in ${ARCH} ; do
-        case ${arch} in
-        bin)
-                FILE_LIST="${FILE_LIST} \
-                        ${VERSION}/Install \
-                        ${VERSION}/CYGNUS \
-                        ${EXECDIR}/lib \
-                        ${EXECDIR}/bin \
-                        ${VERSION}/include \
-                        ${VERSION}/info \
-                        ${VERSION}/lib \
-                        ${VERSION}/man"
-                for tool in ${TOOLS} ; do
-                        case ${tool} in
-                        comp)   TRIGGERS="${TRIGGERS} ${EXECDIR}/bin/gcc" ;;
-                        emacs)  TRIGGERS="${TRIGGERS} ${EXECDIR}/bin/emacs" ;;
-                        *)
-                                echo '***' Oops.  Sanity failure on triggers for binaries for ${tool}.
-                                exit 1
-                                ;;
-                        esac
-                done
-                ;;
-        src)
-                FILE_LIST="${FILE_LIST} \
-                        ${VERSION}/Install \
-                        ${VERSION}/CYGNUS \
-                        ${VERSION}/src"
-                for tool in ${TOOLS} ; do
-                        case ${tool} in
-                        comp)   TRIGGERS="${TRIGGERS} ${VERSION}/src/gcc/gcc.c" ;;
-                        emacs)  TRIGGERS="${TRIGGERS} ${VERSION}/src/emacs/src/emacs.c" ;;
-                        *)
-                                echo '***' Oops.  Sanity failure on triggers for source for ${tool}.
-                                exit 1
-                                ;;
-                        esac
-                done
-                ;;
-        *)
-                echo '***' Oops.  Sanity failure on triggers for arch ${arch}.
-                ;;
-        esac
-done
-
-###
-###
-### removal
-###
-###
-
-if echo ${ACTIONS} | grep rm > /dev/null 2>&1 ; then
-        if [ ! -d "${INSTALLDIR}" ] ; then
-                echo '***' Cannot remove anything from \"${INSTALLDIR}\" because it does not exist.
-                echo '***   ' You probably do not need to remove anything.
-        else
-                popdir=`pwd`
-                if [ ! -d "${INSTALLDIR}" ] ; then
-                        echo '***' Can not cd to \"${INSTALLDIR}\" because it does not exist.
-                        echo '***   ' You probably do not need to remove anything.
-                        exit 1
-                else
-                        if [ ! -r "${INSTALLDIR}" ] ; then
-                                echo '***' Can not cd to \"${INSTALLDIR}\" because I do not have execute permission.
-                                ls -lad ${INSTALLDIR}
-                                echo '***   ' Please fix this and then try running Install again.  For
-                                echo '***   ' more information, please refer to ${NO_ACCESS}
-                                echo '***   ' in ${NOTES}.
-                                exit 1
-                        fi
-                fi
-
-                cd ${INSTALLDIR}
-
-### see also the above note about the timing window.
-
-                if [ "$?" != "0" ] ; then
-                        echo '***' Cannot cd to \"${INSTALLDIR}\".  This is a problem.
-                        echo '***   ' For further help, please refer to
-                        echo '***   ' ${NO_ACCESS} in ${NOTES} or call
-                        echo '***   ' ${HOTLINE}
-                        exit 1
-                else
-                        true
-                fi
-
-                if [ ! -d "${VERSION}" ] ; then
-                        echo '***' Cannot remove anything from \"${INSTALLDIR}/${VERSION}\" because it does not exist.
-                        echo '***   ' You probably do not need to remove anything.
-                        exit 1
-                else
-                        true
-                fi
-
-                echo Removing from \"${INSTALLDIR}\"...
-
-                if rm -rf ${FILE_LIST} ; then
-                        # if neither binaries nor source are installed, remove installdir
-                        if [ -d ${INSTALLDIR}/${EXECDIR} \
-                                -o -d ${INSTALLDIR}/${VERSION}/src ] ; then
-                                true
-                        else
-                                if rm -rf "${INSTALLDIR}/${VERSION}" ; then
-                                        true
-                                else
-                                        if [ ! -w "${INSTALLDIR}" ] ; then
-                                                echo '***' I can not remove ${INSTALLDIR}/${VERSION}
-                                                echo '***   ' because I do not have write access to \"${INSTALLDIR}\"
-                                                echo '***   ' Please fix this and try running Install again.  For more information
-                                                echo '***   ' please refer to ${NO_ACCESS} in ${NOTES}.
-                                                exit 1
-                                        else
-                                                echo '***' I do not know why I can not remove ${INSTALLDIR}/${VERSION}.  This is
-                                                echo '***   ' probably not a problem.
-                                        fi
-                                        exit 1
-                                fi
-                        fi
-
-                        echo Removed.
-                else
-                        echo '***' There appears to have been a removal error.
-                        echo '***   ' Chances are that this is not a problem, but you might try removing
-                        echo '***   ' again.
-                        exit 1
-                fi
-        fi
-        echo Cygnus Support software distribution removed!
-else
-        true
-fi # if removing
-
-###
-###
-### extraction
-###
-###
-
-if echo ${ACTIONS} | grep extract > /dev/null 2>&1 ; then
-        if [ ! -d "${INSTALLDIR}" ] ; then
-                echo Trying to create \"${INSTALLDIR}\"...
-                if mkdir ${INSTALLDIR} ; then
-                        echo Created \"${INSTALLDIR}\".
-                else
-                        echo '***' I can not make directory, \"${INSTALLDIR}\".
-
-### attempt to diagnose...
-
-                        DIR=`echo ${INSTALLDIR} | ${SED} -e 's:/[^/]*$::'`
-                        if [ ! -d "${DIR}" ] ; then
-                                echo '***   ' It looks as though \"${DIR}\" does not even exist.
-                                exit 1
-                        else
-                                if [ ! -w "${DIR}" ] ; then
-                                        echo '***   ' It looks as though you do not have write access to \"${DIR}\".
-                                        echo '***   ' Please fix this and try running Install again.  For more information
-                                        echo '***   ' please refer to ${NO_ACCESS} in ${NOTES}.
-                                        exit 1
-                                else
-                                        echo '***   ' I do not know why I can not create \"${INSTALLDIR}\".  This is a problem.
-                                        echo '***   ' Please call ${HOTLINE}
-                                        exit 1
-                                fi  # ! -w ${DIR}
-                        fi  # ! -d ${DIR}
-                fi  # mkdir ${INSTALLDIR}
-        else
-                true
-        fi  # ! -d ${INSTALLDIR}
-
-        cd ${INSTALLDIR}
-
-        if [ "$?" = "0" ] ; then
-                for trigger in ${TRIGGERS} ; do
-                        if [ -r "${trigger}" ] ; then
-                                echo '***' \"${INSTALLDIR}/${trigger}\" exists and I will not overwrite it.
-                                echo '***   ' If you really want to install it again, please remove it first.
-                                exit 1
-                        else
-                                true
-                        fi  # -r ${trigger}
-                done  # for trigger
-        else
-                echo '***' I can not cd to \"${INSTALLDIR}\".
-
-### attempt to diagnose...
-
-                if [ ! -r "${INSTALLDIR}" ] ; then
-                        echo '***   ' It looks as though you do not have execute permission to \"${INSTALLDIR}\".
-                else
-                        true
-                fi  # ! -r ${INSTALLDIR}
-
-                echo '***   ' For further help, please refer to
-                echo '***   ' ${NO_ACCESS} in ${NOTES}.
-                exit 1
-        fi  # status is zero
-
-
-### remove redundant names from the list
-        echo ${FILE_LIST} ${COMMONS} ${EMACSHIBIN} | tr ' ' '
-' | sort | uniq > ${LOGDIR}/extract_list
-
-        echo It will take some time for me to read the tape.
-        echo Verbose output will be saved in ${LOGDIR}/tar.log
-        echo Extracting into \"${INSTALLDIR}\"... 
-
-### make sure things come off the tape as they were written, but minus what could be a security hole.
-        umask 0
-
-### using the no rewind device, so rewind and fsf to be sure.
-
-        if ${MT} -f ${TAPE} rewind > /dev/null 2>&1 ; then
-                if ${MT} -f ${TAPE} fsf 1 ; then
-                        true
-                else
-                        echo '***' Could not forward space tape device \"${TAPE}\".
-                        exit 1
-                fi  
-        else
-                if test -r ${TAPE} ; then
-                        true
-                else
-                        echo '***' Could not rewind tape device \"${TAPE}\".
-                        exit 1
-                fi
-        fi  # mt ${TAPE} rewind
-
-        if dd if=${TAPE} bs=124b | compress -d | ${TAR} ${TARKEYS} `cat ${LOGDIR}/extract_list` > ${LOGDIR}/tar.log 2>&1 && test -d ${VERSION} ; then
-		if [ -d ${INSTALLDIR}/${EXECDIR}/bin ] ; then
-			echo Extracted.
-		else
-			echo '***' The extraction has failed.  The directory
-			echo '***' ${INSTALLDIR}/${EXECDIR}/bin was not extracted.
-			echo '***   ' The output from the tar command has been logged in ${LOGDIR}/tar.log
-			echo '***   ' I do not know how to continue until this problem has been
-			echo '***   ' corrected.  If you do not know how to fix it either, please
-			echo '***   ' call ${HOTLINE}.
-			exit 1
-		fi
-
-                if (${MT} -f ${TAPE} rewind > /dev/null 2>&1) ; then
-                        true
-                else
-                        true
-                fi  # mt rewind
-        else
-                echo '***' There appears to have been an extraction error.
-                echo '***   ' The output from the tar command has been logged in ${LOGDIR}/tar.log
-                echo '***   ' I do not know how to continue until this problem has been
-                echo '***   ' corrected.  If you do not know how to fix it either, please
-                echo '***   ' call ${HOTLINE}.
-                exit 1
-        fi  # dd | compress | tar ....
-
-        rm -f ${LOGDIR}/extract_list
-        echo Cygnus Support software distribution extracted!
-else
-        true
-fi   # extraction in actions
-
-###
-###
-### fixincludes
-###
-###
-
-if echo ${ACTIONS} | grep fix > /dev/null 2>&1 ; then
-        echo Running fixincludes for ${INSTALLHOST}.
-        echo Verbose output will be stored in ${LOGDIR}/fixincludes.log
-        echo This will take some time.
-        LIB=${INSTALLDIR}/${EXECDIR}/lib/gcc-lib/||HOSTstr||/||GCCvn||/include ; export LIB
-
-	if mkdir ${LIB}/tmpdir && mv ${LIB}/*.h ${LIB}/tmpdir ; then
-		if ${INSTALLDIR}/${VERSION}/lib/fixincludes ${LIB} /usr/include ${INSTALLDIR}/${VERSION}/src/gcc > ${LOGDIR}/fixincludes.log ; then
-			mv ${LIB}/tmpdir/* ${LIB} && rmdir ${LIB}/tmpdir 
-			echo Finished with fixincludes.
-		else
-			echo '***' There seems to have been a problem with fixincludes.
-			echo '***   ' The verbose output from the fixincludes script has been logged in
-			echo '***   ' ${INSTALLDIR}/${VERSION}/fixincludes.log.
-			echo '***   ' I do not know how to continue until this problem has been
-			echo '***   ' corrected.  If you do not know how to fix it either, please
-			echo '***   ' call ${HOTLINE}.
-			mv ${LIB}/tmpdir/* ${LIB} && rmdir ${LIB}/tmpdir
-			exit 1
-		fi  # 
-	else
-                echo '***' Not able to create the temporary include dir
-                echo '***  ' Please ensure that write permissions for
-                echo '***  ' ${LIB} are allowed.
-                echo '***  ' Or call ${HOTLINE} for more information.
-                exit 1
-	fi	
-        echo Fixed include files installed!
-else
-        true
-fi  # fix in actions
-
-###
-###
-### testing the installation
-###
-###
-
-if echo ${ACTIONS} | grep test > /dev/null 2>&1 && echo ${ARCH} | grep bin > /dev/null 2>&1 ; then
-	popdir=`pwd`
-	cd ${LOGDIR}
-        for tool in ${TOOLS} ; do
-                case ${tool} in
-                  comp)
-                        if [ -f ${INSTALLDIR}/${EXECDIR}/bin/gcc ] ; then
-                        cat > ${LOGDIR}/hello.c <<'e!o!f'
-#include <stdio.h>
-
-extern int printf();
-
-int main(int argc, char **argv) {
-        (void) printf("hello: The compilation tools appear to be installed correctly on your %s.\n",
-                MACHINE);
-        return(0);
-} /* main() */
-e!o!f
-                        if ${INSTALLDIR}/${EXECDIR}/bin/gcc -Wall -O -g \
-                                -DMACHINE=\"${INSTALLHOST}\" ${LOGDIR}/hello.c -o ${LOGDIR}/hello ; then
-                                if ${LOGDIR}/hello ; then
-                                        echo This is good.
-                                else
-                                        echo '***' Hello.c fails to run.  This is a problem.
-                                        echo '***   ' Please call ${HOTLINE}
-                                        exit 1
-                                fi  # ./hello
-                        else
-                                echo '***' Hello.c fails to compile.  This is a problem.
-                                echo '***   ' Please call ${HOTLINE}
-                                exit 1
-                        fi  # run gcc
-
-### now check for fixed includes.
-                        cat > ${LOGDIR}/test-ioctl.c << 'e!o!f'
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <math.h>
-
-double atof(const char *);
-
-#ifdef __sun__
-#include <sys/filio.h>
-
-extern int ioctl();
-extern int perror();
-#endif /* __sun__ */
-
-extern int printf();
-
-int main(int argc, char **argv) {
-#ifdef __sun__
-        long l;
-        int fd;
-        int retval;
-
-        if ((fd = open("/dev/tty", O_RDONLY)) == -1) {
-                (void) perror("test-ioctl: can't open /dev/null");
-                return(1);
-        } else if ((retval = ioctl(fd, FIONREAD, &l)) != 0) {
-                (void) perror("test-ioctl: ioctl failed");
-                (void) printf("test-ioctl: Most likely, you have not run \"Install fixincludes\" on this machine.\n");
-                return(2);
-        }
-#endif /* __sun__ */
-
-        printf("test-ioctl: Ansi versions of the system header files, (the fixed includes),\n");
-        printf("test-ioctl: appear to be installed correctly.\n");
-
-/* that's right.  If closing /dev/tty fails, I don't want to know about it. */
-
-        return(0);
-}
-e!o!f
-
-                        case "||HOSTstr||" in
-                        sun3 | sun4 | decstation)
-                                if ${INSTALLDIR}/${EXECDIR}/bin/gcc -Wall -O -g \
-                                        -DMACHINE=\"${INSTALLHOST}\" ${LOGDIR}/test-ioctl.c -o ${LOGDIR}/test-ioctl ; then
-                                        if ${LOGDIR}/test-ioctl ; then
-                                                echo This is good.
-                                        else
-                                                case "$?" in
-                                                1)
-                                                        echo '***' test-ioctl.c fails to read /dev/tty.  If you were running Install
-                                                        echo '***   ' in batch or from a daemon, please try running it again interactively.
-                                                        echo '***   ' If not, please call ${HOTLINE}
-                                                        exit 1
-                                                        ;;
-                                                2)
-                                                        echo '***' test-ioctl.c fails to ioctl.
-                                                        echo '***   ' Most likely you need to run \"Install fixincludes\".
-                                                        echo '***   ' Please run \"Install fixincludes\" and
-                                                        echo '***   ' then try this test again.  For an explanation see
-                                                        echo '***   ' ${WHY_FIXINCLUDES} in ${NOTES}.
-                                                        exit 1
-                                                        ;;
-                                                *)
-                                                        echo '***' test-ioctl.c fails to run.  This is a problem.
-                                                        echo '***   ' Please call ${HOTLINE}
-                                                        exit 1
-                                                        ;;
-                                                esac  # $?
-                                                exit 1
-                                        fi  # test-ioctl
-                                else
-### this presupposes that hello.c DID compile.
-                                        echo '***' test-ioctl.c fails to compile.  This is a problem.
-                                        echo '***   ' Please call ${HOTLINE}
-                                        exit 1
-                                fi  # run gcc
-                                ;;
-                        iris4)
-                                if [ ! -f ${INSTALLDIR}/${EXECDIR}/lib/gcc-lib/||HOSTstr||/||GCCvn||/include/sys/cfeiroute.h ]
-                                then
-                                        echo '***' You seem to be missing ${INSTALLDIR}/${EXECDIR}/lib/gcc-lib/||HOSTstr||/||GCCvn||/include/sys/cfeiroute.h.
-                                        echo '***   ' Most likely you need to run \"Install fixincludes\".
-                                        echo '***   ' Please run \"Install fixincludes\" and
-                                        echo '***   ' then try this test again.  For an explanation see
-                                        echo '***   ' ${WHY_FIXINCLUDES} in ${NOTES}.
-                                        exit 1
-                                fi  # test fixincluded file
-                                ;;
-			sparc-sun-solaris2)
-                                if [ ! -f ${INSTALLDIR}/${EXECDIR}/lib/gcc-lib/||HOSTstr||/||GCCvn||/include/ieeefp.h ]
-                                then
-                                        echo '***' You seem to be missing ${INSTALLDIR}/${EXECDIR}/lib/gcc-lib/||HOSTstr||/||GCCvn||/include/ieeefp.h.
-                                        echo '***   ' Most likely you need to run \"Install fixincludes\".
-                                        echo '***   ' Please run \"Install fixincludes\" and
-                                        echo '***   ' then try this test again.  For an explanation see
-                                        echo '***   ' ${WHY_FIXINCLUDES} in ${NOTES}.
-                                        exit 1
-				fi
-				;;
-
-                        rs6000)
-                                if [ ! -f ${INSTALLDIR}/${EXECDIR}/lib/gcc-lib/||HOSTstr||/||GCCvn||/include/piostruct.h ]
-                                then
-                                        echo '***' You seem to be missing ${INSTALLDIR}/${EXECDIR}/lib/gcc-lib/||HOSTstr||/||GCCvn||/include/piostruct.h.
-                                        echo '***   ' Most likely you need to run \"Install fixincludes\".
-                                        echo '***   ' Please run \"Install fixincludes\" and
-                                        echo '***   ' then try this test again.  For an explanation see
-                                        echo '***   ' ${WHY_FIXINCLUDES} in ${NOTES}.
-                                        exit 1
-                                fi  # test fixincluded file
-                                ;;
-                        esac  # ||HOSTstr||
-                        else
-                                true
-                        fi  # test if gcc present
-
-### now check for g++.
-                        if [ -f ${INSTALLDIR}/${EXECDIR}/bin/g++ ] ; then
-                                cat > ${LOGDIR}/hello.C << 'e!o!f'
-#include <iostream.h>
-
-int main(int argc, char**argv)
-{
-  char *machine = MACHINE;
-  cout << "hello: g++ appears to be installed correctly on your "
-        << machine << ".\n";
-  return(0);
-}
-e!o!f
-                                if ${INSTALLDIR}/${EXECDIR}/bin/gcc ${GPLUSOPTIONS} -Wall -O -g \
-                                        -DMACHINE=\"${INSTALLHOST}\" ${LOGDIR}/hello.C -o ${LOGDIR}/Hello -lg++ ; then
-                                        if ${LOGDIR}/Hello ; then
-                                                echo This is good.
-                                        else
-                                                echo '***' hello.C fails to run.  This is a problem.
-                                                echo '***   ' Please call ${HOTLINE}
-                                                exit 1
-                                        fi  # ./Hello
-                                else
-        ### this presupposes that hello.c DID compile.
-                                        echo '***' hello.C fails to compile.  This is a problem.
-                                        echo '***   ' Please call ${HOTLINE}
-                                        exit 1
-                                fi  # run g++
-
-        ### now check for static initialization.
-                                cat > ${LOGDIR}/static-init.C << 'e!o!f'
-#include <iostream.h>
-int Three;
-
-struct Foo {
-    Foo(int i) { Three = i; }
-};
-
-Foo foo(3);
-
-int main(int argc, char**argv)
-{
-  if (Three != 3) {
-        cout << "static-init: static initialization fails.\n";
-        return(1);
-  }
-
-  cout << "static-init: static initialization appears to work.\n";
-  return(0);
-}
-e!o!f
-                                if ${INSTALLDIR}/${EXECDIR}/bin/gcc ${GPLUSOPTIONS} -Wall -O -g \
-                                        -DMACHINE=\"${INSTALLHOST}\" ${LOGDIR}/static-init.C -o ${LOGDIR}/static-init -lg++ ; then
-                                        if ${LOGDIR}/static-init ; then
-                                                echo This is good.
-                                        else
-                                                echo '***' Static initialization is not working.  This is a problem.
-                                                echo '***   ' Please call ${HOTLINE}
-                                                exit 1
-                                        fi  # run static-init
-                                else
-        ### this presupposes that it DID compile.
-                                        echo '***' static-init.c fails to compile.  This is a problem.
-                                        echo '***   ' Please call ${HOTLINE}
-                                        exit 1
-                                fi  # run g++
-                        else # no g++, so don't test it
-                                true
-                        fi  #  no g++
-                        ;;
-                emacs)
-                        cat > ${LOGDIR}/hello.el <<'e!o!f'
-(server-start)
-(message "Emacs appears to be installed correctly.")
-(kill-emacs 0)
-e!o!f
-                        if ${INSTALLDIR}/${EXECDIR}/bin/emacs -batch -l ${LOGDIR}/hello.el ; then
-                                echo This is good.
-                        else
-                                echo '***' Emacs fails to run.  This is a problem.
-                                echo '***   ' Please call ${HOTLINE}
-                                exit 1
-                        fi
-			;;
-		src)  	# if anyone can tell me how to test the installation of source...
-			true 
-			;;
-		*)
-			echo '***' I do not know how to test for tool \"${tool}\" because I have never
-			echo '***   ' heard of it.  This is a problem.  Please call ${HOTLINE}.
-			exit 1
-			;;
-		esac
-	done
-	rm -f hello* test-ioctl* static-init* Hello*
-	cd ${popdir}
-	echo Cygnus Support software distribution tested!
-else
-	true
-fi
-
-echo Done.
-
-exit 0
-
-###
-### Local Variables:
-### comment-column: 0
-### fill-column: 131
-### End:
-###
-
-### End of Install