Remove i860, i960, bout and aout-adobe targets

Plus remove a few leftovers from the 29k support.

include/
	* aout/adobe.h: Delete.
	* aout/reloc.h: Delete.
	* coff/i860.h: Delete.
	* coff/i960.h: Delete.
	* elf/i860.h: Delete.
	* elf/i960.h: Delete.
	* opcode/i860.h: Delete.
	* opcode/i960.h: Delete.
	* aout/aout64.h (enum reloc_type): Trim off 29k and other unused values.
	* aout/ar.h (ARMAGB): Remove.
	* coff/internal.h (struct internal_aouthdr, struct internal_scnhdr,
	union internal_auxent): Remove i960 support.
bfd/
	* aout-adobe.c: Delete.
	* bout.c: Delete.
	* coff-i860.c: Delete.
	* coff-i960.c: Delete.
	* cpu-i860.c: Delete.
	* cpu-i960.c: Delete.
	* elf32-i860.c: Delete.
	* elf32-i960.c: Delete.
	* hosts/i860mach3.h: Delete.
	* Makefile.am: Remove i860, i960, bout, and adobe support.
	* archures.c: Remove i860 and i960 support.
	* coffcode.h: Likewise.
	* reloc.c: Likewise.
	* aoutx.h: Comment updates.
	* archive.c: Remove BOUT and i960 support.
	* bfd.c: Remove BOUT support.
	* coffswap.h: Remove i960 support.
	* config.bfd: Remove i860, i960 and adobe targets.
	* configure.ac: Remove adode, bout, i860, i960, icoff targets.
	* targets.c: Likewise.
	* ieee.c: Remove i960 support.
	* mach-o.c: Remove i860 support.
	* Makefile.in: Regenerate.
	* bfd-in2.h: Regenerate.
	* configure: Regenerate.
	* libbfd.h: Regenerate.
	* po/SRC-POTFILES.in: Regenerate.
opcodes/
	* opcodes/i860-dis.c: Delete.
	* opcodes/i960-dis.c: Delete.
	* Makefile.am: Remove i860 and i960 support.
	* configure.ac: Likewise.
	* disassemble.c: Likewise.
	* disassemble.h: Likewise.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* po/POTFILES.in: Regenerate.
binutils/
	* ieee.c: Remove i960 support.
	* od-macho.c: Remove i860 support.
	* readelf.c: Remove i860 and i960 support.
	* testsuite/binutils-all/objcopy.exp: Likewise.
	* testsuite/binutils-all/objdump.exp: Likewise.
	* testsuite/lib/binutils-common.exp: Likewise.
gas/
	* config/aout_gnu.h: Delete.
	* config/tc-i860.c: Delete.
	* config/tc-i860.h: Delete.
	* config/tc-i960.c: Delete.
	* config/tc-i960.h: Delete.
	* doc/c-i860.texi: Delete.
	* doc/c-i960.texi: Delete.
	* testsuite/gas/i860/README.i860: Delete.
	* testsuite/gas/i860/bitwise.d: Delete.
	* testsuite/gas/i860/bitwise.s: Delete.
	* testsuite/gas/i860/branch.d: Delete.
	* testsuite/gas/i860/branch.s: Delete.
	* testsuite/gas/i860/bte.d: Delete.
	* testsuite/gas/i860/bte.s: Delete.
	* testsuite/gas/i860/dir-align01.d: Delete.
	* testsuite/gas/i860/dir-align01.s: Delete.
	* testsuite/gas/i860/dir-intel01.d: Delete.
	* testsuite/gas/i860/dir-intel01.s: Delete.
	* testsuite/gas/i860/dir-intel02.d: Delete.
	* testsuite/gas/i860/dir-intel02.s: Delete.
	* testsuite/gas/i860/dir-intel03-err.l: Delete.
	* testsuite/gas/i860/dir-intel03-err.s: Delete.
	* testsuite/gas/i860/dual01.d: Delete.
	* testsuite/gas/i860/dual01.s: Delete.
	* testsuite/gas/i860/dual02-err.l: Delete.
	* testsuite/gas/i860/dual02-err.s: Delete.
	* testsuite/gas/i860/dual03.d: Delete.
	* testsuite/gas/i860/dual03.s: Delete.
	* testsuite/gas/i860/fldst01.d: Delete.
	* testsuite/gas/i860/fldst01.s: Delete.
	* testsuite/gas/i860/fldst02.d: Delete.
	* testsuite/gas/i860/fldst02.s: Delete.
	* testsuite/gas/i860/fldst03.d: Delete.
	* testsuite/gas/i860/fldst03.s: Delete.
	* testsuite/gas/i860/fldst04.d: Delete.
	* testsuite/gas/i860/fldst04.s: Delete.
	* testsuite/gas/i860/fldst05.d: Delete.
	* testsuite/gas/i860/fldst05.s: Delete.
	* testsuite/gas/i860/fldst06.d: Delete.
	* testsuite/gas/i860/fldst06.s: Delete.
	* testsuite/gas/i860/fldst07.d: Delete.
	* testsuite/gas/i860/fldst07.s: Delete.
	* testsuite/gas/i860/fldst08.d: Delete.
	* testsuite/gas/i860/fldst08.s: Delete.
	* testsuite/gas/i860/float01.d: Delete.
	* testsuite/gas/i860/float01.s: Delete.
	* testsuite/gas/i860/float02.d: Delete.
	* testsuite/gas/i860/float02.s: Delete.
	* testsuite/gas/i860/float03.d: Delete.
	* testsuite/gas/i860/float03.s: Delete.
	* testsuite/gas/i860/float04.d: Delete.
	* testsuite/gas/i860/float04.s: Delete.
	* testsuite/gas/i860/form.d: Delete.
	* testsuite/gas/i860/form.s: Delete.
	* testsuite/gas/i860/i860.exp: Delete.
	* testsuite/gas/i860/iarith.d: Delete.
	* testsuite/gas/i860/iarith.s: Delete.
	* testsuite/gas/i860/ldst01.d: Delete.
	* testsuite/gas/i860/ldst01.s: Delete.
	* testsuite/gas/i860/ldst02.d: Delete.
	* testsuite/gas/i860/ldst02.s: Delete.
	* testsuite/gas/i860/ldst03.d: Delete.
	* testsuite/gas/i860/ldst03.s: Delete.
	* testsuite/gas/i860/ldst04.d: Delete.
	* testsuite/gas/i860/ldst04.s: Delete.
	* testsuite/gas/i860/ldst05.d: Delete.
	* testsuite/gas/i860/ldst05.s: Delete.
	* testsuite/gas/i860/ldst06.d: Delete.
	* testsuite/gas/i860/ldst06.s: Delete.
	* testsuite/gas/i860/pfam.d: Delete.
	* testsuite/gas/i860/pfam.s: Delete.
	* testsuite/gas/i860/pfmam.d: Delete.
	* testsuite/gas/i860/pfmam.s: Delete.
	* testsuite/gas/i860/pfmsm.d: Delete.
	* testsuite/gas/i860/pfmsm.s: Delete.
	* testsuite/gas/i860/pfsm.d: Delete.
	* testsuite/gas/i860/pfsm.s: Delete.
	* testsuite/gas/i860/pseudo-ops01.d: Delete.
	* testsuite/gas/i860/pseudo-ops01.s: Delete.
	* testsuite/gas/i860/regress01.d: Delete.
	* testsuite/gas/i860/regress01.s: Delete.
	* testsuite/gas/i860/shift.d: Delete.
	* testsuite/gas/i860/shift.s: Delete.
	* testsuite/gas/i860/simd.d: Delete.
	* testsuite/gas/i860/simd.s: Delete.
	* testsuite/gas/i860/system.d: Delete.
	* testsuite/gas/i860/system.s: Delete.
	* testsuite/gas/i860/xp.d: Delete.
	* testsuite/gas/i860/xp.s: Delete.
	* Makefile.am: Remove i860 and i960 support.
	* configure.tgt: Likewise.
	* doc/Makefile.am: Likewise.
	* doc/all.texi: Likewise.
	* testsuite/gas/all/gas.exp
	* config/obj-coff.h: Remove i960 support.
	* doc/internals.texi: Likewise.
	* expr.c: Likewise.
	* read.c: Likewise.
	* write.c: Likewise.
	* write.h: Likewise.
	* testsuite/gas/lns/lns.exp: Likewise.
	* testsuite/gas/symver/symver.exp: Likewise.
	* config/tc-m68k.c: Remove BOUT support.
	* config/tc-score.c: Likewise.
	* config/tc-score7.c: Likewise.
	* config/tc-sparc.c: Likewise.
	* symbols.c: Likewise.
	* doc/h8.texi: Likewise.
	* configure.ac: Remove BOUT and i860 support.
	* doc/as.texinfo: Remove BOUT, i860 and i960 support
	* Makefile.in: Regenerate.
	* config.in: Regenerate.
	* configure: Regenerate.
	* doc/Makefile.in: Regenerate.
	* po/POTFILES.in: Regenerate.
ld/
	* emulparams/coff_i860.sh: Delete.
	* emulparams/elf32_i860.sh: Delete.
	* emulparams/elf32_i960.sh: Delete.
	* emulparams/gld960.sh: Delete.
	* emulparams/gld960coff.sh: Delete.
	* emulparams/lnk960.sh: Delete.
	* emultempl/gld960.em: Delete.
	* emultempl/gld960c.em: Delete.
	* emultempl/lnk960.em: Delete.
	* scripttempl/i860coff.sc: Delete.
	* scripttempl/i960.sc: Delete.
	* ld.texinfo: Remove i960 support.
	* Makefile.am: Remove i860 and i960 support.
	* configure.tgt: Likewise.
	* testsuite/ld-discard/extern.d: Likewise.
	* testsuite/ld-discard/start.d: Likewise.
	* testsuite/ld-discard/static.d: Likewise.
	* testsuite/ld-elf/compressed1d.d: Likewise.
	* testsuite/ld-elf/group1.d: Likewise.
	* testsuite/ld-elf/group3b.d: Likewise.
	* testsuite/ld-elf/group8a.d: Likewise.
	* testsuite/ld-elf/group8b.d: Likewise.
	* testsuite/ld-elf/group9a.d: Likewise.
	* testsuite/ld-elf/group9b.d: Likewise.
	* testsuite/ld-elf/linkonce2.d: Likewise.
	* testsuite/ld-elf/merge.d: Likewise.
	* testsuite/ld-elf/merge2.d: Likewise.
	* testsuite/ld-elf/merge3.d: Likewise.
	* testsuite/ld-elf/orphan-10.d: Likewise.
	* testsuite/ld-elf/orphan-11.d: Likewise.
	* testsuite/ld-elf/orphan-12.d: Likewise.
	* testsuite/ld-elf/orphan-9.d: Likewise.
	* testsuite/ld-elf/orphan-region.d: Likewise.
	* testsuite/ld-elf/orphan.d: Likewise.
	* testsuite/ld-elf/orphan3.d: Likewise.
	* testsuite/ld-elf/pr12851.d: Likewise.
	* testsuite/ld-elf/pr12975.d: Likewise.
	* testsuite/ld-elf/pr13177.d: Likewise.
	* testsuite/ld-elf/pr13195.d: Likewise.
	* testsuite/ld-elf/pr17550a.d: Likewise.
	* testsuite/ld-elf/pr17550b.d: Likewise.
	* testsuite/ld-elf/pr17550c.d: Likewise.
	* testsuite/ld-elf/pr17550d.d: Likewise.
	* testsuite/ld-elf/pr17615.d: Likewise.
	* testsuite/ld-elf/pr20528a.d: Likewise.
	* testsuite/ld-elf/pr20528b.d: Likewise.
	* testsuite/ld-elf/pr21562a.d: Likewise.
	* testsuite/ld-elf/pr21562b.d: Likewise.
	* testsuite/ld-elf/pr21562c.d: Likewise.
	* testsuite/ld-elf/pr21562d.d: Likewise.
	* testsuite/ld-elf/pr21562i.d: Likewise.
	* testsuite/ld-elf/pr21562j.d: Likewise.
	* testsuite/ld-elf/pr21562k.d: Likewise.
	* testsuite/ld-elf/pr21562l.d: Likewise.
	* testsuite/ld-elf/pr21562m.d: Likewise.
	* testsuite/ld-elf/pr21562n.d: Likewise.
	* testsuite/ld-elf/pr22677.d: Likewise.
	* testsuite/ld-elf/pr22836-1a.d: Likewise.
	* testsuite/ld-elf/pr22836-1b.d: Likewise.
	* testsuite/ld-elf/pr349.d: Likewise.
	* testsuite/ld-elf/sec-to-seg.exp: Likewise.
	* testsuite/ld-elf/sec64k.exp: Likewise.
	* testsuite/ld-elf/warn1.d: Likewise.
	* testsuite/ld-elf/warn2.d: Likewise.
	* testsuite/ld-elf/warn3.d: Likewise.
	* testsuite/lib/ld-lib.exp: Likewise.
	* Makefile.in: Regenerate.
	* po/BLD-POTFILES.in: Regenerate.

242 files changed, 380 insertions, 21807 deletions

diff --git a/bfd/ChangeLog b/bfd/ChangeLog
index 33127be..d396af1 100644
--- a/bfd/ChangeLog
+++ b/bfd/ChangeLog
@@ -1,3 +1,33 @@
+2018-04-11  Alan Modra  <amodra@gmail.com>
+
+	* aout-adobe.c: Delete.
+	* bout.c: Delete.
+	* coff-i860.c: Delete.
+	* coff-i960.c: Delete.
+	* cpu-i860.c: Delete.
+	* cpu-i960.c: Delete.
+	* elf32-i860.c: Delete.
+	* elf32-i960.c: Delete.
+	* hosts/i860mach3.h: Delete.
+	* Makefile.am: Remove i860, i960, bout, and adobe support.
+	* archures.c: Remove i860 and i960 support.
+	* coffcode.h: Likewise.
+	* reloc.c: Likewise.
+	* aoutx.h: Comment updates.
+	* archive.c: Remove BOUT and i960 support.
+	* bfd.c: Remove BOUT support.
+	* coffswap.h: Remove i960 support.
+	* config.bfd: Remove i860, i960 and adobe targets.
+	* configure.ac: Remove adode, bout, i860, i960, icoff targets.
+	* targets.c: Likewise.
+	* ieee.c: Remove i960 support.
+	* mach-o.c: Remove i860 support.
+	* Makefile.in: Regenerate.
+	* bfd-in2.h: Regenerate.
+	* configure: Regenerate.
+	* libbfd.h: Regenerate.
+	* po/SRC-POTFILES.in: Regenerate.
+
 2018-04-09  Maciej W. Rozycki  <macro@mips.com>
 
 	* elf64-mips.c (mips_elf64_write_rel): Handle a NULL BFD pointer
diff --git a/bfd/Makefile.am b/bfd/Makefile.am
index f727ebe..a03e2b2 100644
--- a/bfd/Makefile.am
+++ b/bfd/Makefile.am
@@ -114,8 +114,6 @@ ALL_MACHINES = \
 	cpu-iamcu.lo \
 	cpu-l1om.lo \
 	cpu-k1om.lo \
-	cpu-i860.lo \
-	cpu-i960.lo \
 	cpu-ia64.lo \
 	cpu-ip2k.lo \
 	cpu-iq2000.lo \
@@ -204,8 +202,6 @@ ALL_MACHINES_CFILES = \
 	cpu-iamcu.c \
 	cpu-l1om.c \
 	cpu-k1om.c \
-	cpu-i860.c \
-	cpu-i960.c \
 	cpu-ia64.c \
 	cpu-ip2k.c \
 	cpu-iq2000.c \
@@ -271,7 +267,6 @@ ALL_MACHINES_CFILES = \
 # The .o files needed by all of the 32 bit vectors that are configured into
 # target_vector in targets.c if configured with --enable-targets=all.
 BFD32_BACKENDS = \
-	aout-adobe.lo \
 	aout-arm.lo \
 	aout-cris.lo \
 	aout-ns32k.lo \
@@ -280,7 +275,6 @@ BFD32_BACKENDS = \
 	aout0.lo \
 	aout32.lo \
 	armnetbsd.lo \
-	bout.lo \
 	cf-i386lynx.lo \
 	cf-sparclynx.lo \
 	coff-apollo.lo \
@@ -290,8 +284,6 @@ BFD32_BACKENDS = \
 	coff-h8300.lo \
 	coff-h8500.lo \
 	coff-i386.lo \
-	coff-i860.lo \
-	coff-i960.lo \
 	coff-m68k.lo \
 	coff-m88k.lo \
 	coff-mips.lo \
@@ -347,8 +339,6 @@ BFD32_BACKENDS = \
 	elf32-i370.lo \
 	elf32-i386.lo \
 	elfxx-x86.lo \
-	elf32-i860.lo \
-	elf32-i960.lo \
 	elf32-ip2k.lo \
 	elf32-iq2000.lo \
 	elf32-lm32.lo \
@@ -468,7 +458,6 @@ BFD32_BACKENDS = \
 	xtensa-modules.lo
 
 BFD32_BACKENDS_CFILES = \
-	aout-adobe.c \
 	aout-arm.c \
 	aout-cris.c \
 	aout-ns32k.c \
@@ -477,7 +466,6 @@ BFD32_BACKENDS_CFILES = \
 	aout0.c \
 	aout32.c \
 	armnetbsd.c \
-	bout.c \
 	cf-i386lynx.c \
 	cf-sparclynx.c \
 	coff-apollo.c \
@@ -487,8 +475,6 @@ BFD32_BACKENDS_CFILES = \
 	coff-h8300.c \
 	coff-h8500.c \
 	coff-i386.c \
-	coff-i860.c \
-	coff-i960.c \
 	coff-m68k.c \
 	coff-m88k.c \
 	coff-mips.c \
@@ -544,8 +530,6 @@ BFD32_BACKENDS_CFILES = \
 	elf32-i370.c \
 	elf32-i386.c \
 	elfxx-x86.c \
-	elf32-i860.c \
-	elf32-i960.c \
 	elf32-ip2k.c \
 	elf32-iq2000.c \
 	elf32-lm32.c \
diff --git a/bfd/Makefile.in b/bfd/Makefile.in
index 4060823..d63aef9 100644
--- a/bfd/Makefile.in
+++ b/bfd/Makefile.in
@@ -447,8 +447,6 @@ ALL_MACHINES = \
 	cpu-iamcu.lo \
 	cpu-l1om.lo \
 	cpu-k1om.lo \
-	cpu-i860.lo \
-	cpu-i960.lo \
 	cpu-ia64.lo \
 	cpu-ip2k.lo \
 	cpu-iq2000.lo \
@@ -537,8 +535,6 @@ ALL_MACHINES_CFILES = \
 	cpu-iamcu.c \
 	cpu-l1om.c \
 	cpu-k1om.c \
-	cpu-i860.c \
-	cpu-i960.c \
 	cpu-ia64.c \
 	cpu-ip2k.c \
 	cpu-iq2000.c \
@@ -605,7 +601,6 @@ ALL_MACHINES_CFILES = \
 # The .o files needed by all of the 32 bit vectors that are configured into
 # target_vector in targets.c if configured with --enable-targets=all.
 BFD32_BACKENDS = \
-	aout-adobe.lo \
 	aout-arm.lo \
 	aout-cris.lo \
 	aout-ns32k.lo \
@@ -614,7 +609,6 @@ BFD32_BACKENDS = \
 	aout0.lo \
 	aout32.lo \
 	armnetbsd.lo \
-	bout.lo \
 	cf-i386lynx.lo \
 	cf-sparclynx.lo \
 	coff-apollo.lo \
@@ -624,8 +618,6 @@ BFD32_BACKENDS = \
 	coff-h8300.lo \
 	coff-h8500.lo \
 	coff-i386.lo \
-	coff-i860.lo \
-	coff-i960.lo \
 	coff-m68k.lo \
 	coff-m88k.lo \
 	coff-mips.lo \
@@ -681,8 +673,6 @@ BFD32_BACKENDS = \
 	elf32-i370.lo \
 	elf32-i386.lo \
 	elfxx-x86.lo \
-	elf32-i860.lo \
-	elf32-i960.lo \
 	elf32-ip2k.lo \
 	elf32-iq2000.lo \
 	elf32-lm32.lo \
@@ -802,7 +792,6 @@ BFD32_BACKENDS = \
 	xtensa-modules.lo
 
 BFD32_BACKENDS_CFILES = \
-	aout-adobe.c \
 	aout-arm.c \
 	aout-cris.c \
 	aout-ns32k.c \
@@ -811,7 +800,6 @@ BFD32_BACKENDS_CFILES = \
 	aout0.c \
 	aout32.c \
 	armnetbsd.c \
-	bout.c \
 	cf-i386lynx.c \
 	cf-sparclynx.c \
 	coff-apollo.c \
@@ -821,8 +809,6 @@ BFD32_BACKENDS_CFILES = \
 	coff-h8300.c \
 	coff-h8500.c \
 	coff-i386.c \
-	coff-i860.c \
-	coff-i960.c \
 	coff-m68k.c \
 	coff-m88k.c \
 	coff-mips.c \
@@ -878,8 +864,6 @@ BFD32_BACKENDS_CFILES = \
 	elf32-i370.c \
 	elf32-i386.c \
 	elfxx-x86.c \
-	elf32-i860.c \
-	elf32-i960.c \
 	elf32-ip2k.c \
 	elf32-iq2000.c \
 	elf32-lm32.c \
@@ -1322,7 +1306,6 @@ distclean-compile:
 
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aix386-core.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aix5ppc-core.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aout-adobe.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aout-arm.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aout-cris.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aout-ns32k.Plo@am__quote@
@@ -1339,7 +1322,6 @@ distclean-compile:
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bfdio.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bfdwin.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/binary.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bout.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cache.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cf-i386lynx.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cf-sparclynx.Plo@am__quote@
@@ -1353,8 +1335,6 @@ distclean-compile:
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/coff-h8300.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/coff-h8500.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/coff-i386.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/coff-i860.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/coff-i960.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/coff-m68k.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/coff-m88k.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/coff-mips.Plo@am__quote@
@@ -1400,8 +1380,6 @@ distclean-compile:
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-hppa.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-i370.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-i386.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-i860.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-i960.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-ia64.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-iamcu.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cpu-ip2k.Plo@am__quote@
@@ -1503,8 +1481,6 @@ distclean-compile:
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf32-hppa.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf32-i370.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf32-i386.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf32-i860.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf32-i960.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf32-ia64.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf32-ip2k.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elf32-iq2000.Plo@am__quote@
diff --git a/bfd/aout-adobe.c b/bfd/aout-adobe.c
deleted file mode 100644
index 48189d8..0000000
--- a/bfd/aout-adobe.c
+++ /dev/null
@@ -1,535 +0,0 @@
-/* BFD back-end for a.out.adobe binaries.
-   Copyright (C) 1990-2018 Free Software Foundation, Inc.
-   Written by Cygnus Support.  Based on bout.c.
-
-   This file is part of BFD, the Binary File Descriptor library.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 3 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.  */
-
-#include "sysdep.h"
-#include "bfd.h"
-#include "libbfd.h"
-#include "aout/adobe.h"
-#include "aout/stab_gnu.h"
-#include "libaout.h"		/* BFD a.out internal data structures.  */
-
-/* Forward decl.  */
-extern const bfd_target aout_adobe_vec;
-
-/* Swaps the information in an executable header taken from a raw byte
-   stream memory image, into the internal exec_header structure.  */
-
-static void
-aout_adobe_swap_exec_header_in (bfd *abfd,
-				struct external_exec *bytes,
-				struct internal_exec *execp)
-{
-  /* Now fill in fields in the execp, from the bytes in the raw data.  */
-  execp->a_info   = H_GET_32 (abfd, bytes->e_info);
-  execp->a_text   = GET_WORD (abfd, bytes->e_text);
-  execp->a_data   = GET_WORD (abfd, bytes->e_data);
-  execp->a_bss    = GET_WORD (abfd, bytes->e_bss);
-  execp->a_syms   = GET_WORD (abfd, bytes->e_syms);
-  execp->a_entry  = GET_WORD (abfd, bytes->e_entry);
-  execp->a_trsize = GET_WORD (abfd, bytes->e_trsize);
-  execp->a_drsize = GET_WORD (abfd, bytes->e_drsize);
-}
-
-/* Swaps the information in an internal exec header structure into the
-   supplied buffer ready for writing to disk.  */
-
-static void
-aout_adobe_swap_exec_header_out (bfd *abfd,
-				 struct internal_exec *execp,
-				 struct external_exec *bytes)
-{
-  /* Now fill in fields in the raw data, from the fields in the exec
-     struct.  */
-  H_PUT_32 (abfd, execp->a_info  , bytes->e_info);
-  PUT_WORD (abfd, execp->a_text  , bytes->e_text);
-  PUT_WORD (abfd, execp->a_data  , bytes->e_data);
-  PUT_WORD (abfd, execp->a_bss   , bytes->e_bss);
-  PUT_WORD (abfd, execp->a_syms  , bytes->e_syms);
-  PUT_WORD (abfd, execp->a_entry , bytes->e_entry);
-  PUT_WORD (abfd, execp->a_trsize, bytes->e_trsize);
-  PUT_WORD (abfd, execp->a_drsize, bytes->e_drsize);
-}
-
-/* Finish up the opening of a b.out file for reading.  Fill in all the
-   fields that are not handled by common code.  */
-
-static const bfd_target *
-aout_adobe_callback (bfd *abfd)
-{
-  struct internal_exec *execp = exec_hdr (abfd);
-  asection *sect;
-  struct external_segdesc ext[1];
-  char *section_name;
-  char try_again[30];	/* Name and number.  */
-  char *newname;
-  int trynum;
-  flagword flags;
-
-  /* Architecture and machine type -- unknown in this format.  */
-  bfd_set_arch_mach (abfd, bfd_arch_unknown, 0L);
-
-  /* The positions of the string table and symbol table.  */
-  obj_str_filepos (abfd) = N_STROFF (execp);
-  obj_sym_filepos (abfd) = N_SYMOFF (execp);
-
-  /* Suck up the section information from the file, one section at a time.  */
-  for (;;)
-    {
-      bfd_size_type amt = sizeof (*ext);
-      if (bfd_bread ( ext, amt, abfd) != amt)
-	{
-	  if (bfd_get_error () != bfd_error_system_call)
-	    bfd_set_error (bfd_error_wrong_format);
-
-	  return NULL;
-	}
-      switch (ext->e_type[0])
-	{
-	case N_TEXT:
-	  section_name = ".text";
-	  flags = SEC_CODE | SEC_LOAD | SEC_ALLOC | SEC_HAS_CONTENTS;
-	  break;
-
-	case N_DATA:
-	  section_name = ".data";
-	  flags = SEC_DATA | SEC_LOAD | SEC_ALLOC | SEC_HAS_CONTENTS;
-	  break;
-
-	case N_BSS:
-	  section_name = ".bss";
-	  flags = SEC_DATA | SEC_HAS_CONTENTS;
-	  break;
-
-	case 0:
-	  goto no_more_sections;
-
-	default:
-	  _bfd_error_handler
-	    /* xgettext:c-format */
-	    (_("%pB: unknown section type in a.out.adobe file: %x"),
-	     abfd, ext->e_type[0]);
-	  goto no_more_sections;
-	}
-
-      /* First one is called ".text" or whatever; subsequent ones are
-	 ".text1", ".text2", ...  */
-      bfd_set_error (bfd_error_no_error);
-      sect = bfd_make_section_with_flags (abfd, section_name, flags);
-      trynum = 0;
-
-      while (!sect)
-	{
-	  if (bfd_get_error () != bfd_error_no_error)
-	    /* Some other error -- slide into the sunset.  */
-	    return NULL;
-	  sprintf (try_again, "%s%d", section_name, ++trynum);
-	  sect = bfd_make_section_with_flags (abfd, try_again, flags);
-	}
-
-      /* Fix the name, if it is a sprintf'd name.  */
-      if (sect->name == try_again)
-	{
-	  amt = strlen (sect->name);
-	  newname = bfd_zalloc (abfd, amt);
-	  if (newname == NULL)
-	    return NULL;
-	  strcpy (newname, sect->name);
-	  sect->name = newname;
-	}
-
-      /* Assumed big-endian.  */
-      sect->size = ((ext->e_size[0] << 8)
-		    | ext->e_size[1] << 8
-		    | ext->e_size[2]);
-      sect->vma = H_GET_32 (abfd, ext->e_virtbase);
-      sect->filepos = H_GET_32 (abfd, ext->e_filebase);
-      /* FIXME XXX alignment?  */
-
-      /* Set relocation information for first section of each type.  */
-      if (trynum == 0)
-	switch (ext->e_type[0])
-	  {
-	  case N_TEXT:
-	    sect->rel_filepos = N_TRELOFF (execp);
-	    sect->reloc_count = execp->a_trsize;
-	    break;
-
-	  case N_DATA:
-	    sect->rel_filepos = N_DRELOFF (execp);
-	    sect->reloc_count = execp->a_drsize;
-	    break;
-
-	  default:
-	    break;
-	  }
-    }
- no_more_sections:
-
-  adata (abfd).reloc_entry_size = sizeof (struct reloc_std_external);
-  adata (abfd).symbol_entry_size = sizeof (struct external_nlist);
-  adata (abfd).page_size = 1; /* Not applicable.  */
-  adata (abfd).segment_size = 1; /* Not applicable.  */
-  adata (abfd).exec_bytes_size = EXEC_BYTES_SIZE;
-
-  return abfd->xvec;
-}
-
-static const bfd_target *
-aout_adobe_object_p (bfd *abfd)
-{
-  struct internal_exec anexec;
-  struct external_exec exec_bytes;
-  char *targ;
-  bfd_size_type amt = EXEC_BYTES_SIZE;
-
-  if (bfd_bread (& exec_bytes, amt, abfd) != amt)
-    {
-      if (bfd_get_error () != bfd_error_system_call)
-	bfd_set_error (bfd_error_wrong_format);
-      return NULL;
-    }
-
-  anexec.a_info = H_GET_32 (abfd, exec_bytes.e_info);
-
-  /* Normally we just compare for the magic number.
-     However, a bunch of Adobe tools aren't fixed up yet; they generate
-     files using ZMAGIC(!).
-     If the environment variable GNUTARGET is set to "a.out.adobe", we will
-     take just about any a.out file as an Adobe a.out file.  FIXME!  */
-
-  if (N_BADMAG (&anexec))
-    {
-      targ = getenv ("GNUTARGET");
-      if (targ && !strcmp (targ, aout_adobe_vec.name))
-	/* Just continue anyway, if specifically set to this format.  */
-	;
-      else
-	{
-	  bfd_set_error (bfd_error_wrong_format);
-	  return NULL;
-	}
-    }
-
-  aout_adobe_swap_exec_header_in (abfd, &exec_bytes, &anexec);
-  return aout_32_some_aout_object_p (abfd, &anexec, aout_adobe_callback);
-}
-
-struct bout_data_struct
-{
-  struct aoutdata a;
-  struct internal_exec e;
-};
-
-static bfd_boolean
-aout_adobe_mkobject (bfd *abfd)
-{
-  struct bout_data_struct *rawptr;
-  bfd_size_type amt = sizeof (struct bout_data_struct);
-
-  rawptr = bfd_zalloc (abfd, amt);
-  if (rawptr == NULL)
-    return FALSE;
-
-  abfd->tdata.bout_data = rawptr;
-  exec_hdr (abfd) = &rawptr->e;
-
-  adata (abfd).reloc_entry_size = sizeof (struct reloc_std_external);
-  adata (abfd).symbol_entry_size = sizeof (struct external_nlist);
-  adata (abfd).page_size = 1; /* Not applicable.  */
-  adata (abfd).segment_size = 1; /* Not applicable.  */
-  adata (abfd).exec_bytes_size = EXEC_BYTES_SIZE;
-
-  return TRUE;
-}
-
-static void
-aout_adobe_write_section (bfd *abfd ATTRIBUTE_UNUSED,
-			  sec_ptr sect ATTRIBUTE_UNUSED)
-{
-  /* FIXME XXX.  */
-}
-
-static bfd_boolean
-aout_adobe_write_object_contents (bfd *abfd)
-{
-  struct external_exec swapped_hdr;
-  static struct external_segdesc sentinel[1];	/* Initialized to zero.  */
-  asection *sect;
-  bfd_size_type amt;
-
-  exec_hdr (abfd)->a_info = ZMAGIC;
-
-  /* Calculate text size as total of text sections, etc.  */
-  exec_hdr (abfd)->a_text = 0;
-  exec_hdr (abfd)->a_data = 0;
-  exec_hdr (abfd)->a_bss  = 0;
-  exec_hdr (abfd)->a_trsize = 0;
-  exec_hdr (abfd)->a_drsize = 0;
-
-  for (sect = abfd->sections; sect; sect = sect->next)
-    {
-      if (sect->flags & SEC_CODE)
-	{
-	  exec_hdr (abfd)->a_text += sect->size;
-	  exec_hdr (abfd)->a_trsize += sect->reloc_count *
-	    sizeof (struct reloc_std_external);
-	}
-      else if (sect->flags & SEC_DATA)
-	{
-	  exec_hdr (abfd)->a_data += sect->size;
-	  exec_hdr (abfd)->a_drsize += sect->reloc_count *
-	    sizeof (struct reloc_std_external);
-	}
-      else if (sect->flags & SEC_ALLOC && !(sect->flags & SEC_LOAD))
-	exec_hdr (abfd)->a_bss += sect->size;
-    }
-
-  exec_hdr (abfd)->a_syms = bfd_get_symcount (abfd)
-    * sizeof (struct external_nlist);
-  exec_hdr (abfd)->a_entry = bfd_get_start_address (abfd);
-
-  aout_adobe_swap_exec_header_out (abfd, exec_hdr (abfd), &swapped_hdr);
-
-  amt = EXEC_BYTES_SIZE;
-  if (bfd_seek (abfd, (file_ptr) 0, SEEK_SET) != 0
-      || bfd_bwrite (& swapped_hdr, amt, abfd) != amt)
-    return FALSE;
-
-  /* Now write out the section information.  Text first, data next, rest
-     afterward.  */
-  for (sect = abfd->sections; sect; sect = sect->next)
-    if (sect->flags & SEC_CODE)
-      aout_adobe_write_section (abfd, sect);
-
-  for (sect = abfd->sections; sect; sect = sect->next)
-    if (sect->flags & SEC_DATA)
-      aout_adobe_write_section (abfd, sect);
-
-  for (sect = abfd->sections; sect; sect = sect->next)
-    if (!(sect->flags & (SEC_CODE | SEC_DATA)))
-      aout_adobe_write_section (abfd, sect);
-
-  /* Write final `sentinel` section header (with type of 0).  */
-  amt = sizeof (*sentinel);
-  if (bfd_bwrite (sentinel, amt, abfd) != amt)
-    return FALSE;
-
-  /* Now write out reloc info, followed by syms and strings.  */
-  if (bfd_get_symcount (abfd) != 0)
-    {
-      if (bfd_seek (abfd, (file_ptr) (N_SYMOFF (exec_hdr (abfd))), SEEK_SET)
-	  != 0)
-	return FALSE;
-
-      if (! aout_32_write_syms (abfd))
-	return FALSE;
-
-      if (bfd_seek (abfd, (file_ptr) (N_TRELOFF (exec_hdr (abfd))), SEEK_SET)
-	  != 0)
-	return FALSE;
-
-      for (sect = abfd->sections; sect; sect = sect->next)
-	if (sect->flags & SEC_CODE)
-	  if (!aout_32_squirt_out_relocs (abfd, sect))
-	    return FALSE;
-
-      if (bfd_seek (abfd, (file_ptr) (N_DRELOFF (exec_hdr (abfd))), SEEK_SET)
-	  != 0)
-	return FALSE;
-
-      for (sect = abfd->sections; sect; sect = sect->next)
-	if (sect->flags & SEC_DATA)
-	  if (!aout_32_squirt_out_relocs (abfd, sect))
-	    return FALSE;
-    }
-
-  return TRUE;
-}
-
-static bfd_boolean
-aout_adobe_set_section_contents (bfd *abfd,
-				 asection *section,
-				 const void * location,
-				 file_ptr offset,
-				 bfd_size_type count)
-{
-  file_ptr section_start;
-  sec_ptr sect;
-
-  /* Set by bfd.c handler.  */
-  if (! abfd->output_has_begun)
-    {
-      /* Assign file offsets to sections.  Text sections are first, and
-	 are contiguous.  Then data sections.  Everything else at the end.  */
-      section_start = N_TXTOFF (0);
-
-      for (sect = abfd->sections; sect; sect = sect->next)
-	{
-	  if (sect->flags & SEC_CODE)
-	    {
-	      sect->filepos = section_start;
-	      /* FIXME:  Round to alignment.  */
-	      section_start += sect->size;
-	    }
-	}
-
-      for (sect = abfd->sections; sect; sect = sect->next)
-	{
-	  if (sect->flags & SEC_DATA)
-	    {
-	      sect->filepos = section_start;
-	      /* FIXME:  Round to alignment.  */
-	      section_start += sect->size;
-	    }
-	}
-
-      for (sect = abfd->sections; sect; sect = sect->next)
-	{
-	  if (sect->flags & SEC_HAS_CONTENTS &&
-	      !(sect->flags & (SEC_CODE | SEC_DATA)))
-	    {
-	      sect->filepos = section_start;
-	      /* FIXME:  Round to alignment.  */
-	      section_start += sect->size;
-	    }
-	}
-    }
-
-  /* Regardless, once we know what we're doing, we might as well get
-     going.  */
-  if (bfd_seek (abfd, section->filepos + offset, SEEK_SET) != 0)
-    return FALSE;
-
-  if (count == 0)
-    return TRUE;
-
-  return bfd_bwrite (location, count, abfd) == count;
-}
-
-static bfd_boolean
-aout_adobe_set_arch_mach (bfd *abfd,
-			  enum bfd_architecture arch,
-			  unsigned long machine)
-{
-  if (! bfd_default_set_arch_mach (abfd, arch, machine))
-    return FALSE;
-
-  if (arch == bfd_arch_unknown
-      || arch == bfd_arch_m68k)
-    return TRUE;
-
-  return FALSE;
-}
-
-static int
-aout_adobe_sizeof_headers (bfd *ignore_abfd ATTRIBUTE_UNUSED,
-			   struct bfd_link_info *info ATTRIBUTE_UNUSED)
-{
-  return sizeof (struct internal_exec);
-}
-
-/* Build the transfer vector for Adobe A.Out files.  */
-
-#define aout_32_find_line			    _bfd_nosymbols_find_line
-#define aout_32_get_symbol_version_string	    _bfd_nosymbols_get_symbol_version_string
-#define aout_32_bfd_make_debug_symbol		    _bfd_nosymbols_bfd_make_debug_symbol
-#define aout_32_bfd_reloc_type_lookup		    _bfd_norelocs_bfd_reloc_type_lookup
-#define aout_32_bfd_reloc_name_lookup		    _bfd_norelocs_bfd_reloc_name_lookup
-#define aout_32_close_and_cleanup		    aout_32_bfd_free_cached_info
-#define	aout_32_set_arch_mach			    aout_adobe_set_arch_mach
-#define	aout_32_set_section_contents		    aout_adobe_set_section_contents
-#define	aout_32_sizeof_headers			    aout_adobe_sizeof_headers
-#define aout_32_bfd_get_relocated_section_contents  bfd_generic_get_relocated_section_contents
-#define aout_32_get_section_contents_in_window	    _bfd_generic_get_section_contents_in_window
-#define aout_32_bfd_relax_section		    bfd_generic_relax_section
-#define aout_32_bfd_gc_sections			    bfd_generic_gc_sections
-#define aout_32_bfd_lookup_section_flags	    bfd_generic_lookup_section_flags
-#define aout_32_bfd_merge_sections		    bfd_generic_merge_sections
-#define aout_32_bfd_is_group_section		    bfd_generic_is_group_section
-#define aout_32_bfd_discard_group		    bfd_generic_discard_group
-#define aout_32_section_already_linked		    _bfd_generic_section_already_linked
-#define aout_32_bfd_define_common_symbol	    bfd_generic_define_common_symbol
-#define aout_32_bfd_define_start_stop		    bfd_generic_define_start_stop
-#define aout_32_bfd_link_hash_table_create	    _bfd_generic_link_hash_table_create
-#define aout_32_bfd_link_add_symbols		    _bfd_generic_link_add_symbols
-#define aout_32_bfd_link_just_syms		    _bfd_generic_link_just_syms
-#define aout_32_bfd_copy_link_hash_symbol_type \
-  _bfd_generic_copy_link_hash_symbol_type
-#define aout_32_bfd_final_link			    _bfd_generic_final_link
-#define aout_32_bfd_link_split_section		    _bfd_generic_link_split_section
-#define aout_32_bfd_link_check_relocs		    _bfd_generic_link_check_relocs
-#define aout_32_set_reloc			    _bfd_generic_set_reloc
-
-const bfd_target aout_adobe_vec =
-{
-  "a.out.adobe",		/* Name.  */
-  bfd_target_aout_flavour,
-  BFD_ENDIAN_BIG,		/* Data byte order is unknown (big assumed).  */
-  BFD_ENDIAN_BIG,		/* Header byte order is big.  */
-  (HAS_RELOC | EXEC_P |		/* Object flags.  */
-   HAS_LINENO | HAS_DEBUG |
-   HAS_SYMS | HAS_LOCALS | WP_TEXT ),
-  /* section flags */
-  (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_CODE | SEC_DATA | SEC_RELOC),
-  '_',				/* Symbol leading char.  */
-  ' ',				/* AR_pad_char.  */
-  16,				/* AR_max_namelen.  */
-  0,				/* match priority.  */
-
-  bfd_getb64, bfd_getb_signed_64, bfd_putb64,
-  bfd_getb32, bfd_getb_signed_32, bfd_putb32,
-  bfd_getb16, bfd_getb_signed_16, bfd_putb16,	/* Data.  */
-  bfd_getb64, bfd_getb_signed_64, bfd_putb64,
-  bfd_getb32, bfd_getb_signed_32, bfd_putb32,
-  bfd_getb16, bfd_getb_signed_16, bfd_putb16,	/* Headers.  */
-
-  {				/* bfd_check_format.  */
-    _bfd_dummy_target,
-    aout_adobe_object_p,
-    bfd_generic_archive_p,
-    _bfd_dummy_target
-  },
-  {				/* bfd_set_format.  */
-    _bfd_bool_bfd_false_error,
-    aout_adobe_mkobject,
-    _bfd_generic_mkarchive,
-    _bfd_bool_bfd_false_error
-  },
-  {				/* bfd_write_contents.  */
-    _bfd_bool_bfd_false_error,
-    aout_adobe_write_object_contents,
-    _bfd_write_archive_contents,
-    _bfd_bool_bfd_false_error
-  },
-
-  BFD_JUMP_TABLE_GENERIC (aout_32),
-  BFD_JUMP_TABLE_COPY (_bfd_generic),
-  BFD_JUMP_TABLE_CORE (_bfd_nocore),
-  BFD_JUMP_TABLE_ARCHIVE (_bfd_archive_bsd),
-  BFD_JUMP_TABLE_SYMBOLS (aout_32),
-  BFD_JUMP_TABLE_RELOCS (aout_32),
-  BFD_JUMP_TABLE_WRITE (aout_32),
-  BFD_JUMP_TABLE_LINK (aout_32),
-  BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
-
-  NULL,
-
-  NULL
-};
diff --git a/bfd/aoutx.h b/bfd/aoutx.h
index 525e560..7809fac 100644
--- a/bfd/aoutx.h
+++ b/bfd/aoutx.h
@@ -33,9 +33,9 @@ DESCRIPTION
 	The support is split into a basic support file @file{aoutx.h}
 	and other files which derive functions from the base. One
 	derivation file is @file{aoutf1.h} (for a.out flavour 1), and
-	adds to the basic a.out functions support for sun3, sun4, 386
-	and 29k a.out files, to create a target jump vector for a
-	specific target.
+	adds to the basic a.out functions support for sun3, sun4, and
+	386 a.out files, to create a target jump vector for a specific
+	target.
 
 	This information is further split out into more specific files
 	for each machine, including @file{sunos.c} for sun3 and sun4,
@@ -136,10 +136,9 @@ DESCRIPTION
 	The file @file{aoutx.h} provides for both the @emph{standard}
 	and @emph{extended} forms of a.out relocation records.
 
-	The standard records contain only an
-	address, a symbol index, and a type field. The extended records
-	(used on 29ks and sparcs) also have a full integer for an
-	addend.  */
+	The standard records contain only an address, a symbol index,
+	and a type field.  The extended records also have a full
+	integer for an addend.  */
 
 #ifndef CTOR_TABLE_RELOC_HOWTO
 #define CTOR_TABLE_RELOC_IDX 2
diff --git a/bfd/archive.c b/bfd/archive.c
index d58f172..b949310 100644
--- a/bfd/archive.c
+++ b/bfd/archive.c
@@ -847,7 +847,6 @@ bfd_generic_archive_p (bfd *abfd)
   bfd_is_thin_archive (abfd) = (strncmp (armag, ARMAGT, SARMAG) == 0);
 
   if (strncmp (armag, ARMAG, SARMAG) != 0
-      && strncmp (armag, ARMAGB, SARMAG) != 0
       && ! bfd_is_thin_archive (abfd))
     {
       bfd_set_error (bfd_error_wrong_format);
@@ -1042,21 +1041,6 @@ do_slurp_coff_armap (bfd *abfd)
   nsymz = bfd_getb32 (int_buf);
   stringsize = parsed_size - (4 * nsymz) - 4;
 
-  /* ... except that some archive formats are broken, and it may be our
-     fault - the i960 little endian coff sometimes has big and sometimes
-     little, because our tools changed.  Here's a horrible hack to clean
-     up the crap.  */
-
-  if (stringsize > 0xfffff
-      && bfd_get_arch (abfd) == bfd_arch_i960
-      && bfd_get_flavour (abfd) == bfd_target_coff_flavour)
-    {
-      /* This looks dangerous, let's do it the other way around.  */
-      nsymz = bfd_getl32 (int_buf);
-      stringsize = parsed_size - (4 * nsymz) - 4;
-      swap = bfd_getl32;
-    }
-
   /* The coff armap must be read sequentially.  So we construct a
      bsd-style one in core all at once, for simplicity.  */
 
diff --git a/bfd/archures.c b/bfd/archures.c
index 7327f5f..20868ecd 100644
--- a/bfd/archures.c
+++ b/bfd/archures.c
@@ -63,8 +63,7 @@ DESCRIPTION
 	Another field indicates which processor within
 	the family is in use.  The machine gives a number which
 	distinguishes different versions of the architecture,
-	containing, for example, 2 and 3 for Intel i960 KA and i960 KB,
-	and 68020 and 68030 for Motorola 68020 and 68030.
+	containing, for example, 68020 for Motorola 68020.
 
 .enum bfd_architecture
 .{
@@ -103,23 +102,6 @@ DESCRIPTION
 .#define bfd_mach_mcf_isa_c_nodiv_mac	30
 .#define bfd_mach_mcf_isa_c_nodiv_emac	31
 .  bfd_arch_vax,       {* DEC Vax.  *}
-.  bfd_arch_i960,      {* Intel 960.  *}
-.    {* The order of the following is important.
-.	lower number indicates a machine type that
-.	only accepts a subset of the instructions
-.	available to machines with higher numbers.
-.	The exception is the "ca", which is
-.	incompatible with all other machines except
-.	"core".  *}
-.
-.#define bfd_mach_i960_core	1
-.#define bfd_mach_i960_ka_sa	2
-.#define bfd_mach_i960_kb_sb	3
-.#define bfd_mach_i960_mc	4
-.#define bfd_mach_i960_xa	5
-.#define bfd_mach_i960_ca	6
-.#define bfd_mach_i960_jx	7
-.#define bfd_mach_i960_hx	8
 .
 .  bfd_arch_or1k,      {* OpenRISC 1000.  *}
 .#define bfd_mach_or1k		1
@@ -237,7 +219,6 @@ DESCRIPTION
 .#define bfd_mach_i386_iamcu_intel_syntax (bfd_mach_i386_iamcu | bfd_mach_i386_intel_syntax)
 .  bfd_arch_we32k,     {* AT&T WE32xxx.  *}
 .  bfd_arch_tahoe,     {* CCI/Harris Tahoe.  *}
-.  bfd_arch_i860,      {* Intel 860.  *}
 .  bfd_arch_i370,      {* IBM 360/370 Mainframes.  *}
 .  bfd_arch_romp,      {* IBM ROMP PC/RT.  *}
 .  bfd_arch_convex,    {* Convex.  *}
@@ -603,8 +584,6 @@ extern const bfd_arch_info_type bfd_hppa_arch;
 extern const bfd_arch_info_type bfd_i370_arch;
 extern const bfd_arch_info_type bfd_i386_arch;
 extern const bfd_arch_info_type bfd_iamcu_arch;
-extern const bfd_arch_info_type bfd_i860_arch;
-extern const bfd_arch_info_type bfd_i960_arch;
 extern const bfd_arch_info_type bfd_ia64_arch;
 extern const bfd_arch_info_type bfd_ip2k_arch;
 extern const bfd_arch_info_type bfd_iq2000_arch;
@@ -698,8 +677,6 @@ static const bfd_arch_info_type * const bfd_archures_list[] =
     &bfd_i370_arch,
     &bfd_i386_arch,
     &bfd_iamcu_arch,
-    &bfd_i860_arch,
-    &bfd_i960_arch,
     &bfd_ia64_arch,
     &bfd_ip2k_arch,
     &bfd_iq2000_arch,
diff --git a/bfd/bfd-in2.h b/bfd/bfd-in2.h
index de5f68d..3f5d38b 100644
--- a/bfd/bfd-in2.h
+++ b/bfd/bfd-in2.h
@@ -1979,23 +1979,6 @@ enum bfd_architecture
 #define bfd_mach_mcf_isa_c_nodiv_mac   30
 #define bfd_mach_mcf_isa_c_nodiv_emac  31
   bfd_arch_vax,       /* DEC Vax.  */
-  bfd_arch_i960,      /* Intel 960.  */
-    /* The order of the following is important.
-       lower number indicates a machine type that
-       only accepts a subset of the instructions
-       available to machines with higher numbers.
-       The exception is the "ca", which is
-       incompatible with all other machines except
-       "core".  */
-
-#define bfd_mach_i960_core     1
-#define bfd_mach_i960_ka_sa    2
-#define bfd_mach_i960_kb_sb    3
-#define bfd_mach_i960_mc       4
-#define bfd_mach_i960_xa       5
-#define bfd_mach_i960_ca       6
-#define bfd_mach_i960_jx       7
-#define bfd_mach_i960_hx       8
 
   bfd_arch_or1k,      /* OpenRISC 1000.  */
 #define bfd_mach_or1k          1
@@ -2113,7 +2096,6 @@ enum bfd_architecture
 #define bfd_mach_i386_iamcu_intel_syntax (bfd_mach_i386_iamcu | bfd_mach_i386_intel_syntax)
   bfd_arch_we32k,     /* AT&T WE32xxx.  */
   bfd_arch_tahoe,     /* CCI/Harris Tahoe.  */
-  bfd_arch_i860,      /* Intel 860.  */
   bfd_arch_i370,      /* IBM 360/370 Mainframes.  */
   bfd_arch_romp,      /* IBM ROMP PC/RT.  */
   bfd_arch_convex,    /* Convex.  */
@@ -2506,10 +2488,9 @@ typedef enum bfd_reloc_status
   /* The symbol to relocate against was undefined.  */
   bfd_reloc_undefined,
 
-  /* The relocation was performed, but may not be ok - presently
-     generated only when linking i960 coff files with i960 b.out
-     symbols.  If this type is returned, the error_message argument
-     to bfd_perform_relocation will be set.  */
+  /* The relocation was performed, but may not be ok.  If this type is
+     returned, the error_message argument to bfd_perform_relocation
+     will be set.  */
   bfd_reloc_dangerous
  }
  bfd_reloc_status_type;
@@ -2589,8 +2570,7 @@ struct reloc_howto_struct
 
   /* If this field is non null, then the supplied function is
      called rather than the normal function.  This allows really
-     strange relocation methods to be accommodated (e.g., i960 callj
-     instructions).  */
+     strange relocation methods to be accommodated.  */
   bfd_reloc_status_type (*special_function)
     (bfd *, arelent *, struct bfd_symbol *, void *, asection *,
      bfd *, char **);
@@ -2715,9 +2695,7 @@ enum bfd_reloc_code_real {
 
 /* PC-relative relocations.  Sometimes these are relative to the address
 of the relocation itself; sometimes they are relative to the start of
-the section containing the relocation.  It depends on the specific target.
-
-The 24-bit relocation is used in some Intel 960 configurations.  */
+the section containing the relocation.  It depends on the specific target.  */
   BFD_RELOC_64_PCREL,
   BFD_RELOC_32_PCREL,
   BFD_RELOC_24_PCREL,
@@ -2809,9 +2787,6 @@ decided relatively late.  */
   BFD_RELOC_GPREL16,
   BFD_RELOC_GPREL32,
 
-/* Reloc types used for i960/b.out.  */
-  BFD_RELOC_I960_CALLJ,
-
 /* SPARC ELF relocations.  There is probably some overlap with other
 relocation types already defined.  */
   BFD_RELOC_NONE,
@@ -5435,40 +5410,6 @@ a matching LO8XG part.  */
   BFD_RELOC_CRIS_DTPMOD,
   BFD_RELOC_CRIS_32_IE,
 
-/* Intel i860 Relocations.  */
-  BFD_RELOC_860_COPY,
-  BFD_RELOC_860_GLOB_DAT,
-  BFD_RELOC_860_JUMP_SLOT,
-  BFD_RELOC_860_RELATIVE,
-  BFD_RELOC_860_PC26,
-  BFD_RELOC_860_PLT26,
-  BFD_RELOC_860_PC16,
-  BFD_RELOC_860_LOW0,
-  BFD_RELOC_860_SPLIT0,
-  BFD_RELOC_860_LOW1,
-  BFD_RELOC_860_SPLIT1,
-  BFD_RELOC_860_LOW2,
-  BFD_RELOC_860_SPLIT2,
-  BFD_RELOC_860_LOW3,
-  BFD_RELOC_860_LOGOT0,
-  BFD_RELOC_860_SPGOT0,
-  BFD_RELOC_860_LOGOT1,
-  BFD_RELOC_860_SPGOT1,
-  BFD_RELOC_860_LOGOTOFF0,
-  BFD_RELOC_860_SPGOTOFF0,
-  BFD_RELOC_860_LOGOTOFF1,
-  BFD_RELOC_860_SPGOTOFF1,
-  BFD_RELOC_860_LOGOTOFF2,
-  BFD_RELOC_860_LOGOTOFF3,
-  BFD_RELOC_860_LOPC,
-  BFD_RELOC_860_HIGHADJ,
-  BFD_RELOC_860_HAGOT,
-  BFD_RELOC_860_HAGOTOFF,
-  BFD_RELOC_860_HAPC,
-  BFD_RELOC_860_HIGH,
-  BFD_RELOC_860_HIGOT,
-  BFD_RELOC_860_HIGOTOFF,
-
 /* OpenRISC 1000 Relocations.  */
   BFD_RELOC_OR1K_REL_26,
   BFD_RELOC_OR1K_GOTPC_HI16,
@@ -7076,7 +7017,6 @@ struct bfd
       struct tekhex_data_struct *tekhex_data;
       struct elf_obj_tdata *elf_obj_data;
       struct nlm_obj_tdata *nlm_obj_data;
-      struct bout_data_struct *bout_data;
       struct mmo_data_struct *mmo_data;
       struct sun_core_struct *sun_core_data;
       struct sco5_core_struct *sco5_core_data;
diff --git a/bfd/bfd.c b/bfd/bfd.c
index 288b5b1..a1b6bf1 100644
--- a/bfd/bfd.c
+++ b/bfd/bfd.c
@@ -318,7 +318,6 @@ CODE_FRAGMENT
 .      struct tekhex_data_struct *tekhex_data;
 .      struct elf_obj_tdata *elf_obj_data;
 .      struct nlm_obj_tdata *nlm_obj_data;
-.      struct bout_data_struct *bout_data;
 .      struct mmo_data_struct *mmo_data;
 .      struct sun_core_struct *sun_core_data;
 .      struct sco5_core_struct *sco5_core_data;
diff --git a/bfd/bout.c b/bfd/bout.c
deleted file mode 100644
index c766633..0000000
--- a/bfd/bout.c
+++ /dev/null
@@ -1,1508 +0,0 @@
-/* BFD back-end for Intel 960 b.out binaries.
-   Copyright (C) 1990-2018 Free Software Foundation, Inc.
-   Written by Cygnus Support.
-
-   This file is part of BFD, the Binary File Descriptor library.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 3 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
-   MA 02110-1301, USA.  */
-
-#include "sysdep.h"
-#include "bfd.h"
-#include "libbfd.h"
-#include "bfdlink.h"
-#include "genlink.h"
-#include "bout.h"
-#include "libiberty.h"
-
-#include "aout/stab_gnu.h"
-#include "libaout.h"		/* BFD a.out internal data structures.  */
-
-#define ABS32CODE 0
-#define ABS32CODE_SHRUNK 1
-#define PCREL24 2
-#define CALLJ 3
-#define ABS32 4
-#define PCREL13 5
-#define ABS32_MAYBE_RELAXABLE 1
-#define ABS32_WAS_RELAXABLE 2
-
-#define ALIGNER 10
-#define ALIGNDONE 11
-
-static reloc_howto_type howto_reloc_callj =
-  HOWTO (CALLJ, 0, 2, 24, TRUE, 0, complain_overflow_signed, 0,"callj", TRUE, 0x00ffffff, 0x00ffffff,FALSE);
-static  reloc_howto_type howto_reloc_abs32 =
-  HOWTO (ABS32, 0, 2, 32, FALSE, 0, complain_overflow_bitfield,0,"abs32", TRUE, 0xffffffff,0xffffffff,FALSE);
-static reloc_howto_type howto_reloc_pcrel24 =
-  HOWTO (PCREL24, 0, 2, 24, TRUE, 0, complain_overflow_signed,0,"pcrel24", TRUE, 0x00ffffff,0x00ffffff,FALSE);
-static reloc_howto_type howto_reloc_pcrel13 =
-  HOWTO (PCREL13, 0, 2, 13, TRUE, 0, complain_overflow_signed,0,"pcrel13", TRUE, 0x00001fff,0x00001fff,FALSE);
-static reloc_howto_type howto_reloc_abs32codeshrunk =
-  HOWTO (ABS32CODE_SHRUNK, 0, 2, 24, TRUE, 0, complain_overflow_signed, 0,"callx->callj", TRUE, 0x00ffffff, 0x00ffffff,FALSE);
-static  reloc_howto_type howto_reloc_abs32code =
-  HOWTO (ABS32CODE, 0, 2, 32, FALSE, 0, complain_overflow_bitfield,0,"callx", TRUE, 0xffffffff,0xffffffff,FALSE);
-
-static reloc_howto_type howto_align_table[] =
-{
-  HOWTO (ALIGNER, 0, 0x1, 0, FALSE, 0, complain_overflow_dont, 0, "align16", FALSE, 0, 0, FALSE),
-  HOWTO (ALIGNER, 0, 0x3, 0, FALSE, 0, complain_overflow_dont, 0, "align32", FALSE, 0, 0, FALSE),
-  HOWTO (ALIGNER, 0, 0x7, 0, FALSE, 0, complain_overflow_dont, 0, "align64", FALSE, 0, 0, FALSE),
-  HOWTO (ALIGNER, 0, 0xf, 0, FALSE, 0, complain_overflow_dont, 0, "align128", FALSE, 0, 0, FALSE),
-};
-
-static reloc_howto_type howto_done_align_table[] =
-{
-  HOWTO (ALIGNDONE, 0x1, 0x1, 0, FALSE, 0, complain_overflow_dont, 0, "donealign16", FALSE, 0, 0, FALSE),
-  HOWTO (ALIGNDONE, 0x3, 0x3, 0, FALSE, 0, complain_overflow_dont, 0, "donealign32", FALSE, 0, 0, FALSE),
-  HOWTO (ALIGNDONE, 0x7, 0x7, 0, FALSE, 0, complain_overflow_dont, 0, "donealign64", FALSE, 0, 0, FALSE),
-  HOWTO (ALIGNDONE, 0xf, 0xf, 0, FALSE, 0, complain_overflow_dont, 0, "donealign128", FALSE, 0, 0, FALSE),
-};
-
-/* Swaps the information in an executable header taken from a raw byte
-   stream memory image, into the internal exec_header structure.  */
-
-static void
-bout_swap_exec_header_in (bfd *abfd,
-			  struct external_exec *bytes,
-			  struct internal_exec *execp)
-{
-  /* Now fill in fields in the execp, from the bytes in the raw data.  */
-  execp->a_info      = H_GET_32 (abfd, bytes->e_info);
-  execp->a_text      = GET_WORD (abfd, bytes->e_text);
-  execp->a_data      = GET_WORD (abfd, bytes->e_data);
-  execp->a_bss       = GET_WORD (abfd, bytes->e_bss);
-  execp->a_syms      = GET_WORD (abfd, bytes->e_syms);
-  execp->a_entry     = GET_WORD (abfd, bytes->e_entry);
-  execp->a_trsize    = GET_WORD (abfd, bytes->e_trsize);
-  execp->a_drsize    = GET_WORD (abfd, bytes->e_drsize);
-  execp->a_tload     = GET_WORD (abfd, bytes->e_tload);
-  execp->a_dload     = GET_WORD (abfd, bytes->e_dload);
-  execp->a_talign    = bytes->e_talign[0];
-  execp->a_dalign    = bytes->e_dalign[0];
-  execp->a_balign    = bytes->e_balign[0];
-  execp->a_relaxable = bytes->e_relaxable[0];
-}
-
-/* Swaps the information in an internal exec header structure into the
-   supplied buffer ready for writing to disk.  */
-
-static void
-bout_swap_exec_header_out (bfd *abfd,
-			   struct internal_exec *execp,
-			   struct external_exec *bytes)
-{
-  /* Now fill in fields in the raw data, from the fields in the exec struct.  */
-  H_PUT_32 (abfd, execp->a_info  , bytes->e_info);
-  PUT_WORD (abfd, execp->a_text  , bytes->e_text);
-  PUT_WORD (abfd, execp->a_data  , bytes->e_data);
-  PUT_WORD (abfd, execp->a_bss   , bytes->e_bss);
-  PUT_WORD (abfd, execp->a_syms  , bytes->e_syms);
-  PUT_WORD (abfd, execp->a_entry , bytes->e_entry);
-  PUT_WORD (abfd, execp->a_trsize, bytes->e_trsize);
-  PUT_WORD (abfd, execp->a_drsize, bytes->e_drsize);
-  PUT_WORD (abfd, execp->a_tload , bytes->e_tload);
-  PUT_WORD (abfd, execp->a_dload , bytes->e_dload);
-  bytes->e_talign[0]    = execp->a_talign;
-  bytes->e_dalign[0]    = execp->a_dalign;
-  bytes->e_balign[0]    = execp->a_balign;
-  bytes->e_relaxable[0] = execp->a_relaxable;
-}
-
-/* Finish up the opening of a b.out file for reading.  Fill in all the
-   fields that are not handled by common code.  */
-
-static const bfd_target *
-b_out_callback (bfd *abfd)
-{
-  struct internal_exec *execp = exec_hdr (abfd);
-  unsigned long bss_start;
-
-  /* Architecture and machine type.  */
-  bfd_set_arch_mach (abfd,
-		     bfd_arch_i960,     /* B.out only used on i960.  */
-		     bfd_mach_i960_core /* Default.  */
-		     );
-
-  /* The positions of the string table and symbol table.  */
-  obj_str_filepos (abfd) = N_STROFF (execp);
-  obj_sym_filepos (abfd) = N_SYMOFF (execp);
-
-  /* The alignments of the sections.  */
-  obj_textsec (abfd)->alignment_power = execp->a_talign;
-  obj_datasec (abfd)->alignment_power = execp->a_dalign;
-  obj_bsssec  (abfd)->alignment_power = execp->a_balign;
-
-  /* The starting addresses of the sections.  */
-  obj_textsec (abfd)->vma = execp->a_tload;
-  obj_datasec (abfd)->vma = execp->a_dload;
-
-  obj_textsec (abfd)->lma = obj_textsec (abfd)->vma;
-  obj_datasec (abfd)->lma = obj_datasec (abfd)->vma;
-
-  /* And reload the sizes, since the aout module zaps them.  */
-  obj_textsec (abfd)->size = execp->a_text;
-
-  bss_start = execp->a_dload + execp->a_data; /* BSS = end of data section.  */
-  obj_bsssec (abfd)->vma = align_power (bss_start, execp->a_balign);
-
-  obj_bsssec (abfd)->lma = obj_bsssec (abfd)->vma;
-
-  /* The file positions of the sections.  */
-  obj_textsec (abfd)->filepos = N_TXTOFF (execp);
-  obj_datasec (abfd)->filepos = N_DATOFF (execp);
-
-  /* The file positions of the relocation info.  */
-  obj_textsec (abfd)->rel_filepos = N_TROFF (execp);
-  obj_datasec (abfd)->rel_filepos =  N_DROFF (execp);
-
-  adata (abfd).page_size = 1;	/* Not applicable.  */
-  adata (abfd).segment_size = 1; /* Not applicable.  */
-  adata (abfd).exec_bytes_size = EXEC_BYTES_SIZE;
-
-  if (execp->a_relaxable)
-   abfd->flags |= BFD_IS_RELAXABLE;
-  return abfd->xvec;
-}
-
-static const bfd_target *
-b_out_object_p (bfd *abfd)
-{
-  struct internal_exec anexec;
-  struct external_exec exec_bytes;
-  bfd_size_type amt = EXEC_BYTES_SIZE;
-
-  if (bfd_bread ((void *) &exec_bytes, amt, abfd) != amt)
-    {
-      if (bfd_get_error () != bfd_error_system_call)
-	bfd_set_error (bfd_error_wrong_format);
-      return 0;
-    }
-
-  anexec.a_info = H_GET_32 (abfd, exec_bytes.e_info);
-
-  if (N_BADMAG (&anexec))
-    {
-      bfd_set_error (bfd_error_wrong_format);
-      return 0;
-    }
-
-  bout_swap_exec_header_in (abfd, &exec_bytes, &anexec);
-  return aout_32_some_aout_object_p (abfd, &anexec, b_out_callback);
-}
-
-struct bout_data_struct
-  {
-    struct aoutdata a;
-    struct internal_exec e;
-  };
-
-static bfd_boolean
-b_out_mkobject (bfd *abfd)
-{
-  struct bout_data_struct *rawptr;
-  bfd_size_type amt = sizeof (struct bout_data_struct);
-
-  rawptr = bfd_zalloc (abfd, amt);
-  if (rawptr == NULL)
-    return FALSE;
-
-  abfd->tdata.bout_data = rawptr;
-  exec_hdr (abfd) = &rawptr->e;
-
-  obj_textsec (abfd) = NULL;
-  obj_datasec (abfd) = NULL;
-  obj_bsssec (abfd)  = NULL;
-
-  return TRUE;
-}
-
-static int
-b_out_symbol_cmp (const void * a_ptr, const void * b_ptr)
-{
-  struct aout_symbol ** a = (struct aout_symbol **) a_ptr;
-  struct aout_symbol ** b = (struct aout_symbol **) b_ptr;
-  asection *sec;
-  bfd_vma av, bv;
-
-  /* Primary key is address.  */
-  sec = bfd_get_section (&(*a)->symbol);
-  av = sec->output_section->vma + sec->output_offset + (*a)->symbol.value;
-  sec = bfd_get_section (&(*b)->symbol);
-  bv = sec->output_section->vma + sec->output_offset + (*b)->symbol.value;
-
-  if (av < bv)
-    return -1;
-  if (av > bv)
-    return 1;
-
-  /* Secondary key puts CALLNAME syms last and BALNAME syms first,
-     so that they have the best chance of being contiguous.  */
-  if (IS_BALNAME ((*a)->other) || IS_CALLNAME ((*b)->other))
-    return -1;
-  if (IS_CALLNAME ((*a)->other) || IS_BALNAME ((*b)->other))
-    return 1;
-
-  return 0;
-}
-
-static bfd_boolean
-b_out_squirt_out_relocs (bfd *abfd, asection *section)
-{
-  arelent **generic;
-  int r_extern = 0;
-  int r_idx;
-  int incode_mask;
-  int len_1;
-  unsigned int count = section->reloc_count;
-  struct relocation_info *native, *natptr;
-  bfd_size_type natsize;
-  int extern_mask, pcrel_mask, len_2, callj_mask;
-
-  if (count == 0)
-    return TRUE;
-
-  generic = section->orelocation;
-  natsize = (bfd_size_type) count * sizeof (struct relocation_info);
-  native = bfd_malloc (natsize);
-  if (!native && natsize != 0)
-    return FALSE;
-
-  if (bfd_header_big_endian (abfd))
-    {
-      /* Big-endian bit field allocation order.  */
-      pcrel_mask  = 0x80;
-      extern_mask = 0x10;
-      len_2       = 0x40;
-      len_1       = 0x20;
-      callj_mask  = 0x02;
-      incode_mask = 0x08;
-    }
-  else
-    {
-      /* Little-endian bit field allocation order.  */
-      pcrel_mask  = 0x01;
-      extern_mask = 0x08;
-      len_2       = 0x04;
-      len_1       = 0x02;
-      callj_mask  = 0x40;
-      incode_mask = 0x10;
-    }
-
-  for (natptr = native; count > 0; --count, ++natptr, ++generic)
-    {
-      arelent *g = *generic;
-      unsigned char *raw = (unsigned char *) natptr;
-      asymbol *sym = *(g->sym_ptr_ptr);
-      asection *output_section = sym->section->output_section;
-
-      H_PUT_32 (abfd, g->address, raw);
-      /* Find a type in the output format which matches the input howto -
-	 at the moment we assume input format == output format FIXME!!  */
-      r_idx = 0;
-      /* FIXME:  Need callj stuff here, and to check the howto entries to
-	 be sure they are real for this architecture.  */
-      if (g->howto== &howto_reloc_callj)
-	raw[7] = callj_mask + pcrel_mask + len_2;
-      else if (g->howto == &howto_reloc_pcrel24)
-	raw[7] = pcrel_mask + len_2;
-      else if (g->howto == &howto_reloc_pcrel13)
-	raw[7] = pcrel_mask + len_1;
-      else if (g->howto == &howto_reloc_abs32code)
-	raw[7] = len_2 + incode_mask;
-      else if (g->howto >= howto_align_table
-	       && g->howto <= (howto_align_table + ARRAY_SIZE (howto_align_table) - 1))
-	{
-	  /* symnum == -2; extern_mask not set, pcrel_mask set.  */
-	  r_idx = -2;
-	  r_extern = 0;
-	  raw[7] = (pcrel_mask
-		    | ((g->howto - howto_align_table) << 1));
-	}
-      else
-	raw[7] = len_2;
-
-      if (r_idx != 0)
-	/* Already mucked with r_extern, r_idx.  */;
-      else if (bfd_is_com_section (output_section)
-	       || bfd_is_abs_section (output_section)
-	       || bfd_is_und_section (output_section))
-	{
-	  if (bfd_abs_section_ptr->symbol == sym)
-	    {
-	      /* Whoops, looked like an abs symbol, but is really an offset
-		 from the abs section.  */
-	      r_idx = 0;
-	      r_extern = 0;
-	    }
-	  else
-	    {
-	      /* Fill in symbol.  */
-	      r_extern = 1;
-	      r_idx = (*g->sym_ptr_ptr)->udata.i;
-	    }
-	}
-      else
-	{
-	  /* Just an ordinary section.  */
-	  r_extern = 0;
-	  r_idx  = output_section->target_index;
-	}
-
-      if (bfd_header_big_endian (abfd))
-	{
-	  raw[4] = (unsigned char) (r_idx >> 16);
-	  raw[5] = (unsigned char) (r_idx >>  8);
-	  raw[6] = (unsigned char) (r_idx      );
-	}
-      else
-	{
-	  raw[6] = (unsigned char) (r_idx >> 16);
-	  raw[5] = (unsigned char) (r_idx>>   8);
-	  raw[4] = (unsigned char) (r_idx      );
-	}
-
-      if (r_extern)
-	raw[7] |= extern_mask;
-    }
-
-  if (bfd_bwrite ((void *) native, natsize, abfd) != natsize)
-    {
-      free (native);
-      return FALSE;
-    }
-
-  free (native);
-
-  return TRUE;
-}
-
-static bfd_boolean
-b_out_write_object_contents (bfd *abfd)
-{
-  struct external_exec swapped_hdr;
-  bfd_size_type amt;
-
-  if (! aout_32_make_sections (abfd))
-    return FALSE;
-
-  exec_hdr (abfd)->a_info = BMAGIC;
-
-  exec_hdr (abfd)->a_text = obj_textsec (abfd)->size;
-  exec_hdr (abfd)->a_data = obj_datasec (abfd)->size;
-  exec_hdr (abfd)->a_bss = obj_bsssec (abfd)->size;
-  exec_hdr (abfd)->a_syms = bfd_get_symcount (abfd) * 12;
-  exec_hdr (abfd)->a_entry = bfd_get_start_address (abfd);
-  exec_hdr (abfd)->a_trsize = (obj_textsec (abfd)->reloc_count) * 8;
-  exec_hdr (abfd)->a_drsize = (obj_datasec (abfd)->reloc_count) * 8;
-
-  exec_hdr (abfd)->a_talign = obj_textsec (abfd)->alignment_power;
-  exec_hdr (abfd)->a_dalign = obj_datasec (abfd)->alignment_power;
-  exec_hdr (abfd)->a_balign = obj_bsssec (abfd)->alignment_power;
-
-  exec_hdr (abfd)->a_tload = obj_textsec (abfd)->vma;
-  exec_hdr (abfd)->a_dload = obj_datasec (abfd)->vma;
-
-  bout_swap_exec_header_out (abfd, exec_hdr (abfd), &swapped_hdr);
-
-  amt = EXEC_BYTES_SIZE;
-  if (bfd_seek (abfd, (file_ptr) 0, SEEK_SET) != 0
-      || bfd_bwrite ((void *) &swapped_hdr, amt, abfd) != amt)
-    return FALSE;
-
-  /* Now write out reloc info, followed by syms and strings */
-  if (bfd_get_symcount (abfd) != 0)
-    {
-      /* Make sure {CALL,BAL}NAME symbols remain adjacent on output
-	 by sorting.  This is complicated by the fact that stabs are
-	 also ordered.  Solve this by shifting all stabs to the end
-	 in order, then sorting the rest.  */
-
-      asymbol **outsyms, **p, **q;
-
-      outsyms = bfd_get_outsymbols (abfd);
-      p = outsyms + bfd_get_symcount (abfd);
-
-      for (q = p--; p >= outsyms; p--)
-	{
-	  if ((*p)->flags & BSF_DEBUGGING)
-	    {
-	      asymbol *t = *--q;
-	      *q = *p;
-	      *p = t;
-	    }
-	}
-
-      if (q > outsyms)
-	qsort (outsyms, (size_t) (q - outsyms), sizeof (asymbol*),
-	       b_out_symbol_cmp);
-
-      /* Back to your regularly scheduled program.  */
-      if (bfd_seek (abfd, (file_ptr) (N_SYMOFF (exec_hdr (abfd))), SEEK_SET)
-	  != 0)
-	return FALSE;
-
-      if (! aout_32_write_syms (abfd))
-	return FALSE;
-
-      if (bfd_seek (abfd, (file_ptr) (N_TROFF (exec_hdr (abfd))), SEEK_SET)
-	  != 0)
-	return FALSE;
-
-      if (!b_out_squirt_out_relocs (abfd, obj_textsec (abfd)))
-	return FALSE;
-      if (bfd_seek (abfd, (file_ptr) (N_DROFF (exec_hdr (abfd))), SEEK_SET)
-	  != 0)
-	return FALSE;
-
-      if (!b_out_squirt_out_relocs (abfd, obj_datasec (abfd)))
-	return FALSE;
-    }
-  return TRUE;
-}
-
-/* Some reloc hackery.  */
-
-#define CALLS	  0x66003800	/* Template for 'calls' instruction	*/
-#define BAL	  0x0b000000	/* Template for 'bal' instruction	*/
-#define BAL_MASK  0x00ffffff
-#define BALX	  0x85f00000	/* Template for 'balx' instruction	*/
-#define BALX_MASK 0x0007ffff
-#define CALL      0x09000000
-#define PCREL13_MASK 0x1fff
-
-#define output_addr(sec) ((sec)->output_offset+(sec)->output_section->vma)
-
-static bfd_vma
-get_value (arelent *reloc,
-	   struct bfd_link_info *link_info,
-	   asection *input_section)
-{
-  bfd_vma value;
-  asymbol *symbol = *(reloc->sym_ptr_ptr);
-
-  /* A symbol holds a pointer to a section, and an offset from the
-     base of the section.  To relocate, we find where the section will
-     live in the output and add that in.  */
-  if (bfd_is_und_section (symbol->section))
-    {
-      struct bfd_link_hash_entry *h;
-
-      /* The symbol is undefined in this BFD.  Look it up in the
-	 global linker hash table.  FIXME: This should be changed when
-	 we convert b.out to use a specific final_link function and
-	 change the interface to bfd_relax_section to not require the
-	 generic symbols.  */
-      h = bfd_wrapped_link_hash_lookup (input_section->owner, link_info,
-					bfd_asymbol_name (symbol),
-					FALSE, FALSE, TRUE);
-      if (h != (struct bfd_link_hash_entry *) NULL
-	  && (h->type == bfd_link_hash_defined
-	      || h->type == bfd_link_hash_defweak))
-	value = h->u.def.value + output_addr (h->u.def.section);
-      else if (h != (struct bfd_link_hash_entry *) NULL
-	       && h->type == bfd_link_hash_common)
-	value = h->u.c.size;
-      else
-	{
-	  (*link_info->callbacks->undefined_symbol)
-	    (link_info, bfd_asymbol_name (symbol),
-	     input_section->owner, input_section, reloc->address, TRUE);
-	  value = 0;
-	}
-    }
-  else
-    value = symbol->value + output_addr (symbol->section);
-
-  /* Add the value contained in the relocation.  */
-  value += reloc->addend;
-
-  return value;
-}
-
-/* Magic to turn callx into calljx.  */
-
-static bfd_reloc_status_type
-calljx_callback (bfd *abfd,
-		 struct bfd_link_info *link_info,
-		 arelent *reloc_entry,
-		 void * src,
-		 void * dst,
-		 asection *input_section)
-{
-  int word = bfd_get_32 (abfd, src);
-  asymbol *symbol_in = *(reloc_entry->sym_ptr_ptr);
-  aout_symbol_type *symbol = aout_symbol (symbol_in);
-  bfd_vma value;
-
-  value = get_value (reloc_entry, link_info, input_section);
-
-  if (IS_CALLNAME (symbol->other))
-    {
-      aout_symbol_type *balsym = symbol+1;
-      int inst = bfd_get_32 (abfd, (bfd_byte *) src-4);
-
-      /* The next symbol should be an N_BALNAME.  */
-      BFD_ASSERT (IS_BALNAME (balsym->other));
-      inst &= BALX_MASK;
-      inst |= BALX;
-      bfd_put_32 (abfd, (bfd_vma) inst, (bfd_byte *) dst-4);
-      symbol = balsym;
-      value = (symbol->symbol.value
-	       + output_addr (symbol->symbol.section));
-    }
-
-  word += value + reloc_entry->addend;
-
-  bfd_put_32 (abfd, (bfd_vma) word, dst);
-  return bfd_reloc_ok;
-}
-
-/* Magic to turn call into callj.  */
-
-static bfd_reloc_status_type
-callj_callback (bfd *abfd,
-		struct bfd_link_info *link_info,
-		arelent *reloc_entry,
-		void * data,
-		unsigned int srcidx,
-		unsigned int dstidx,
-		asection *input_section,
-		bfd_boolean shrinking)
-{
-  int word = bfd_get_32 (abfd, (bfd_byte *) data + srcidx);
-  asymbol *symbol_in = *(reloc_entry->sym_ptr_ptr);
-  aout_symbol_type *symbol = aout_symbol (symbol_in);
-  bfd_vma value;
-
-  value = get_value (reloc_entry, link_info, input_section);
-
-  if (IS_OTHER (symbol->other))
-    /* Call to a system procedure - replace code with system
-       procedure number.  */
-    word = CALLS | (symbol->other - 1);
-
-  else if (IS_CALLNAME (symbol->other))
-    {
-      aout_symbol_type *balsym = symbol+1;
-
-      /* The next symbol should be an N_BALNAME.  */
-      BFD_ASSERT (IS_BALNAME (balsym->other));
-
-      /* We are calling a leaf, so replace the call instruction with a
-	 bal.  */
-      word = BAL | ((word
-		     + output_addr (balsym->symbol.section)
-		     + balsym->symbol.value + reloc_entry->addend
-		     - dstidx
-		     - output_addr (input_section))
-		    & BAL_MASK);
-    }
-  else if ((symbol->symbol.flags & BSF_SECTION_SYM) != 0)
-    {
-      /* A callj against a symbol in the same section is a fully
-	 resolved relative call.  We don't need to do anything here.
-	 If the symbol is not in the same section, I'm not sure what
-	 to do; fortunately, this case will probably never arise.  */
-      BFD_ASSERT (! shrinking);
-      BFD_ASSERT (symbol->symbol.section == input_section);
-    }
-  else
-    word = CALL | (((word & BAL_MASK)
-		    + value
-		    + reloc_entry->addend
-		    - (shrinking ? dstidx : 0)
-		    - output_addr (input_section))
-		   & BAL_MASK);
-
-  bfd_put_32 (abfd, (bfd_vma) word, (bfd_byte *) data + dstidx);
-  return bfd_reloc_ok;
-}
-
-static reloc_howto_type *
-b_out_bfd_reloc_type_lookup (bfd *abfd ATTRIBUTE_UNUSED,
-			     bfd_reloc_code_real_type code)
-{
-  switch (code)
-    {
-    default:
-      return 0;
-    case BFD_RELOC_I960_CALLJ:
-      return &howto_reloc_callj;
-    case BFD_RELOC_32:
-    case BFD_RELOC_CTOR:
-      return &howto_reloc_abs32;
-    case BFD_RELOC_24_PCREL:
-      return &howto_reloc_pcrel24;
-    }
-}
-
-static reloc_howto_type *
-b_out_bfd_reloc_name_lookup (bfd *abfd ATTRIBUTE_UNUSED,
-			     const char *r_name)
-{
-  if (strcasecmp (howto_reloc_callj.name, r_name) == 0)
-    return &howto_reloc_callj;
-  if (strcasecmp (howto_reloc_abs32.name, r_name) == 0)
-    return &howto_reloc_abs32;
-  if (strcasecmp (howto_reloc_pcrel24.name, r_name) == 0)
-    return &howto_reloc_pcrel24;
-
-  return NULL;
-}
-
-/* Allocate enough room for all the reloc entries, plus pointers to them all.  */
-
-static bfd_boolean
-b_out_slurp_reloc_table (bfd *abfd, sec_ptr asect, asymbol **symbols)
-{
-  struct relocation_info *rptr;
-  unsigned int counter;
-  arelent *cache_ptr;
-  int extern_mask, pcrel_mask, callj_mask, length_shift;
-  int incode_mask;
-  int size_mask;
-  bfd_vma prev_addr = 0;
-  unsigned int count;
-  bfd_size_type reloc_size, amt;
-  struct relocation_info *relocs;
-  arelent *reloc_cache;
-
-  if (asect->relocation)
-    return TRUE;
-
-  if (!aout_32_slurp_symbol_table (abfd))
-    return FALSE;
-
-  if (asect == obj_datasec (abfd))
-    reloc_size = exec_hdr (abfd)->a_drsize;
-  else if (asect == obj_textsec (abfd))
-    reloc_size = exec_hdr (abfd)->a_trsize;
-  else if (asect == obj_bsssec (abfd))
-    reloc_size = 0;
-  else
-    {
-      bfd_set_error (bfd_error_invalid_operation);
-      return FALSE;
-    }
-
-  if (bfd_seek (abfd, asect->rel_filepos, SEEK_SET) != 0)
-    return FALSE;
-  count = reloc_size / sizeof (struct relocation_info);
-
-  relocs = bfd_malloc (reloc_size);
-  if (!relocs && reloc_size != 0)
-    return FALSE;
-
-  amt = ((bfd_size_type) count + 1) * sizeof (arelent);
-  reloc_cache = bfd_malloc (amt);
-  if (!reloc_cache)
-    {
-      if (relocs != NULL)
-	free (relocs);
-      return FALSE;
-    }
-
-  if (bfd_bread ((void *) relocs, reloc_size, abfd) != reloc_size)
-    {
-      free (reloc_cache);
-      if (relocs != NULL)
-	free (relocs);
-      return FALSE;
-    }
-
-  if (bfd_header_big_endian (abfd))
-    {
-      /* Big-endian bit field allocation order.  */
-      pcrel_mask  = 0x80;
-      extern_mask = 0x10;
-      incode_mask = 0x08;
-      callj_mask  = 0x02;
-      size_mask =   0x20;
-      length_shift = 5;
-    }
-  else
-    {
-      /* Little-endian bit field allocation order.  */
-      pcrel_mask  = 0x01;
-      extern_mask = 0x08;
-      incode_mask = 0x10;
-      callj_mask  = 0x40;
-      size_mask   = 0x02;
-      length_shift = 1;
-    }
-
-  for (rptr = relocs, cache_ptr = reloc_cache, counter = 0;
-       counter < count;
-       counter++, rptr++, cache_ptr++)
-  {
-    unsigned char *raw = (unsigned char *)rptr;
-    unsigned int symnum;
-
-    cache_ptr->address = H_GET_32 (abfd, raw + 0);
-    cache_ptr->howto = 0;
-
-    if (bfd_header_big_endian (abfd))
-      symnum = (raw[4] << 16) | (raw[5] << 8) | raw[6];
-    else
-      symnum = (raw[6] << 16) | (raw[5] << 8) | raw[4];
-
-    if (raw[7] & extern_mask)
-      {
-	/* If this is set then the r_index is an index into the symbol table;
-	   if the bit is not set then r_index contains a section map.
-	   We either fill in the sym entry with a pointer to the symbol,
-	   or point to the correct section.  */
-      cache_ptr->sym_ptr_ptr = symbols + symnum;
-      cache_ptr->addend = 0;
-      }
-    else
-      {
-	/* In a.out symbols are relative to the beginning of the
-	   file rather than sections ?
-	   (look in translate_from_native_sym_flags)
-	   The reloc entry addend has added to it the offset into the
-	   file of the data, so subtract the base to make the reloc
-	   section relative.  */
-	int s;
-
-	/* Sign-extend symnum from 24 bits to whatever host uses.  */
-	s = symnum;
-	if (s & (1 << 23))
-	  s |= (~0U) << 24;
-
-	cache_ptr->sym_ptr_ptr = (asymbol **)NULL;
-	switch (s)
-	  {
-	  case N_TEXT:
-	  case N_TEXT | N_EXT:
-	    cache_ptr->sym_ptr_ptr = obj_textsec (abfd)->symbol_ptr_ptr;
-	    cache_ptr->addend = - obj_textsec (abfd)->vma;
-	    break;
-	  case N_DATA:
-	  case N_DATA | N_EXT:
-	    cache_ptr->sym_ptr_ptr = obj_datasec (abfd)->symbol_ptr_ptr;
-	    cache_ptr->addend = - obj_datasec (abfd)->vma;
-	    break;
-	  case N_BSS:
-	  case N_BSS | N_EXT:
-	    cache_ptr->sym_ptr_ptr = obj_bsssec (abfd)->symbol_ptr_ptr;
-	    cache_ptr->addend =  - obj_bsssec (abfd)->vma;
-	    break;
-	  case N_ABS:
-	  case N_ABS | N_EXT:
-	    cache_ptr->sym_ptr_ptr = obj_bsssec (abfd)->symbol_ptr_ptr;
-	    cache_ptr->addend = 0;
-	    break;
-	  case -2: /* .align */
-	    if (raw[7] & pcrel_mask)
-	      {
-		cache_ptr->howto = &howto_align_table[(raw[7] >> length_shift) & 3];
-		cache_ptr->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr;
-	      }
-	    else
-	      {
-		/* .org? */
-		abort ();
-	      }
-	    cache_ptr->addend = 0;
-	    break;
-	  default:
-	    BFD_ASSERT (FALSE);
-	    break;
-	  }
-      }
-
-    /* The i960 only has a few relocation types:
-       abs 32-bit and pcrel 24bit.   except for callj's!  */
-    if (cache_ptr->howto != 0)
-      ;
-    else if (raw[7] & callj_mask)
-      {
-	cache_ptr->howto = &howto_reloc_callj;
-      }
-    else if ( raw[7] & pcrel_mask)
-      {
-	if (raw[7] & size_mask)
-	  cache_ptr->howto = &howto_reloc_pcrel13;
-	else
-	  cache_ptr->howto = &howto_reloc_pcrel24;
-      }
-    else
-      {
-	if (raw[7] & incode_mask)
-	  cache_ptr->howto = &howto_reloc_abs32code;
-	else
-	  cache_ptr->howto = &howto_reloc_abs32;
-      }
-
-    if (cache_ptr->address < prev_addr)
-      {
-	/* Ouch! this reloc is out of order, insert into the right place.  */
-	arelent tmp;
-	arelent *cursor = cache_ptr-1;
-	bfd_vma stop = cache_ptr->address;
-
-	tmp  = *cache_ptr;
-	while (cursor->address > stop && cursor >= reloc_cache)
-	  {
-	    cursor[1] = cursor[0];
-	    cursor--;
-	  }
-
-	cursor[1] = tmp;
-      }
-    else
-      prev_addr = cache_ptr->address;
-  }
-
-  if (relocs != NULL)
-    free (relocs);
-  asect->relocation = reloc_cache;
-  asect->reloc_count = count;
-
-  return TRUE;
-}
-
-/* This is stupid.  This function should be a boolean predicate.  */
-
-static long
-b_out_canonicalize_reloc (bfd *abfd,
-			  sec_ptr section,
-			  arelent **relptr,
-			  asymbol **symbols)
-{
-  arelent *tblptr;
-  unsigned int count;
-
-  if ((section->flags & SEC_CONSTRUCTOR) != 0)
-    {
-      arelent_chain *chain = section->constructor_chain;
-
-      for (count = 0; count < section->reloc_count; count++)
-	{
-	  *relptr++ = &chain->relent;
-	  chain = chain->next;
-	}
-    }
-  else
-    {
-      if (section->relocation == NULL
-	  && ! b_out_slurp_reloc_table (abfd, section, symbols))
-	return -1;
-
-      tblptr = section->relocation;
-      for (count = 0; count++ < section->reloc_count;)
-	*relptr++ = tblptr++;
-    }
-
-  *relptr = NULL;
-
-  return section->reloc_count;
-}
-
-static long
-b_out_get_reloc_upper_bound (bfd *abfd, sec_ptr asect)
-{
-  if (bfd_get_format (abfd) != bfd_object)
-    {
-      bfd_set_error (bfd_error_invalid_operation);
-      return -1;
-    }
-
-  if (asect->flags & SEC_CONSTRUCTOR)
-    return sizeof (arelent *) * (asect->reloc_count + 1);
-
-  if (asect == obj_datasec (abfd))
-    return (sizeof (arelent *) *
-	    ((exec_hdr (abfd)->a_drsize / sizeof (struct relocation_info))
-	     + 1));
-
-  if (asect == obj_textsec (abfd))
-    return (sizeof (arelent *) *
-	    ((exec_hdr (abfd)->a_trsize / sizeof (struct relocation_info))
-	     + 1));
-
-  if (asect == obj_bsssec (abfd))
-    return 0;
-
-  bfd_set_error (bfd_error_invalid_operation);
-  return -1;
-}
-
-
-static bfd_boolean
-b_out_set_section_contents (bfd *abfd,
-			    asection *section,
-			    const void * location,
-			    file_ptr offset,
-			    bfd_size_type count)
-{
-  if (! abfd->output_has_begun)
-    {
-      /* Set by bfd.c handler.  */
-      if (! aout_32_make_sections (abfd))
-	return FALSE;
-
-      obj_textsec (abfd)->filepos = sizeof (struct external_exec);
-      obj_datasec (abfd)->filepos = obj_textsec (abfd)->filepos
-	+  obj_textsec (abfd)->size;
-    }
-
-  /* Regardless, once we know what we're doing, we might as well get going.  */
-  if (bfd_seek (abfd, section->filepos + offset, SEEK_SET) != 0)
-    return FALSE;
-
-  if (count == 0)
-    return TRUE;
-
-  return bfd_bwrite ((void *) location, count, abfd) == count;
-}
-
-static bfd_boolean
-b_out_set_arch_mach (bfd *abfd,
-		     enum bfd_architecture arch,
-		     unsigned long machine)
-{
-  bfd_default_set_arch_mach (abfd, arch, machine);
-
-  if (arch == bfd_arch_unknown)	/* Unknown machine arch is OK.  */
-    return TRUE;
-
-  if (arch == bfd_arch_i960)	/* i960 default is OK.  */
-    switch (machine)
-      {
-      case bfd_mach_i960_core:
-      case bfd_mach_i960_kb_sb:
-      case bfd_mach_i960_mc:
-      case bfd_mach_i960_xa:
-      case bfd_mach_i960_ca:
-      case bfd_mach_i960_ka_sa:
-      case bfd_mach_i960_jx:
-      case bfd_mach_i960_hx:
-      case 0:
-	return TRUE;
-      default:
-	return FALSE;
-      }
-
-  return FALSE;
-}
-
-static int
-b_out_sizeof_headers (bfd *ignore_abfd ATTRIBUTE_UNUSED,
-		      struct bfd_link_info *info ATTRIBUTE_UNUSED)
-{
-  return sizeof (struct external_exec);
-}
-
-static void
-perform_slip (bfd *abfd,
-	      unsigned int slip,
-	      asection *input_section,
-	      bfd_vma value)
-{
-  asymbol **s;
-
-  s = _bfd_generic_link_get_symbols (abfd);
-  BFD_ASSERT (s != (asymbol **) NULL);
-
-  /* Find all symbols past this point, and make them know
-     what's happened.  */
-  while (*s)
-    {
-      asymbol *p = *s;
-
-      if (p->section == input_section)
-	{
-	  /* This was pointing into this section, so mangle it.  */
-	  if (p->value > value)
-	    {
-	      p->value -=slip;
-
-	      if (p->udata.p != NULL)
-		{
-		  struct generic_link_hash_entry *h;
-
-		  h = (struct generic_link_hash_entry *) p->udata.p;
-		  BFD_ASSERT (h->root.type == bfd_link_hash_defined);
-		  h->root.u.def.value -= slip;
-		  BFD_ASSERT (h->root.u.def.value == p->value);
-		}
-	    }
-	}
-      s++;
-    }
-}
-
-/* This routine works out if the thing we want to get to can be
-   reached with a 24bit offset instead of a 32 bit one.
-   If it can, then it changes the amode.  */
-
-static int
-abs32code (bfd *abfd,
-	   asection *input_section,
-	   arelent *r,
-	   unsigned int shrink,
-	   struct bfd_link_info *link_info)
-{
-  bfd_vma value = get_value (r, link_info, input_section);
-  bfd_vma dot = output_addr (input_section) + r->address;
-  bfd_vma gap;
-
-  /* See if the address we're looking at within 2^23 bytes of where
-     we are, if so then we can use a small branch rather than the
-     jump we were going to.  */
-  gap = value - (dot - shrink);
-
-  if ((long)(-1UL << 23) < (long)gap && (long)gap < 1L << 23)
-    {
-      /* Change the reloc type from 32bitcode possible 24, to 24bit
-	 possible 32.  */
-      r->howto = &howto_reloc_abs32codeshrunk;
-      /* The place to relc moves back by four bytes.  */
-      r->address -=4;
-
-      /* This will be four bytes smaller in the long run.  */
-      shrink += 4 ;
-      perform_slip (abfd, 4, input_section, r->address-shrink + 4);
-    }
-
-  return shrink;
-}
-
-static int
-aligncode (bfd *abfd,
-	   asection *input_section,
-	   arelent *r,
-	   unsigned int shrink)
-{
-  bfd_vma dot = output_addr (input_section) + r->address;
-  bfd_vma old_end;
-  bfd_vma new_end;
-  unsigned int shrink_delta;
-  int size = r->howto->size;
-
-  /* Reduce the size of the alignment so that it's still aligned but
-     smaller  - the current size is already the same size as or bigger
-     than the alignment required.  */
-
-  /* Calculate the first byte following the padding before we optimize.  */
-  old_end = ((dot + size ) & ~size) + size+1;
-  /* Work out where the new end will be - remember that we're smaller
-     than we used to be.  */
-  new_end = ((dot - shrink + size) & ~size);
-
-  shrink_delta = (old_end - new_end) - shrink;
-
-  if (shrink_delta)
-    {
-      /* Change the reloc so that it knows how far to align to.  */
-      r->howto = howto_done_align_table + (r->howto - howto_align_table);
-
-      /* Encode the stuff into the addend - for future use we need to
-	 know how big the reloc used to be.  */
-      r->addend = old_end - dot + r->address;
-
-      /* This will be N bytes smaller in the long run, adjust all the symbols.  */
-      perform_slip (abfd, shrink_delta, input_section, r->address - shrink);
-      shrink += shrink_delta;
-    }
-
-  return shrink;
-}
-
-static bfd_boolean
-b_out_bfd_relax_section (bfd *abfd,
-			 asection *i,
-			 struct bfd_link_info *link_info,
-			 bfd_boolean *again)
-{
-  /* Get enough memory to hold the stuff.  */
-  bfd *input_bfd = i->owner;
-  asection *input_section = i;
-  unsigned int shrink = 0 ;
-  arelent **reloc_vector = NULL;
-  long reloc_size = bfd_get_reloc_upper_bound (input_bfd, input_section);
-
-  if (bfd_link_relocatable (link_info))
-    (*link_info->callbacks->einfo)
-      (_("%P%F: --relax and -r may not be used together\n"));
-
-  if (reloc_size < 0)
-    return FALSE;
-
-  /* We only run this relaxation once.  It might work to run it
-     multiple times, but it hasn't been tested.  */
-  *again = FALSE;
-
-  if (reloc_size)
-    {
-      long reloc_count;
-
-      reloc_vector = bfd_malloc ((bfd_size_type) reloc_size);
-      if (reloc_vector == NULL && reloc_size != 0)
-	goto error_return;
-
-      /* Get the relocs and think about them.  */
-      reloc_count =
-	bfd_canonicalize_reloc (input_bfd, input_section, reloc_vector,
-				_bfd_generic_link_get_symbols (input_bfd));
-      if (reloc_count < 0)
-	goto error_return;
-      if (reloc_count > 0)
-	{
-	  arelent **parent;
-
-	  for (parent = reloc_vector; *parent; parent++)
-	    {
-	      arelent *r = *parent;
-
-	      switch (r->howto->type)
-		{
-		case ALIGNER:
-		  /* An alignment reloc.  */
-		  shrink = aligncode (abfd, input_section, r, shrink);
-		  break;
-		case ABS32CODE:
-		  /* A 32bit reloc in an addressing mode.  */
-		  shrink = abs32code (input_bfd, input_section, r, shrink,
-				      link_info);
-		  break;
-		case ABS32CODE_SHRUNK:
-		  shrink += 4;
-		  break;
-		}
-	    }
-	}
-    }
-  input_section->size -= shrink;
-
-  if (reloc_vector != NULL)
-    free (reloc_vector);
-  return TRUE;
- error_return:
-  if (reloc_vector != NULL)
-    free (reloc_vector);
-  return FALSE;
-}
-
-static bfd_byte *
-b_out_bfd_get_relocated_section_contents (bfd *output_bfd,
-					  struct bfd_link_info *link_info,
-					  struct bfd_link_order *link_order,
-					  bfd_byte *data,
-					  bfd_boolean relocatable,
-					  asymbol **symbols)
-{
-  /* Get enough memory to hold the stuff.  */
-  bfd *input_bfd = link_order->u.indirect.section->owner;
-  asection *input_section = link_order->u.indirect.section;
-  long reloc_size = bfd_get_reloc_upper_bound (input_bfd, input_section);
-  arelent **reloc_vector = NULL;
-  long reloc_count;
-
-  if (reloc_size < 0)
-    goto error_return;
-
-  /* If producing relocatable output, don't bother to relax.  */
-  if (relocatable)
-    return bfd_generic_get_relocated_section_contents (output_bfd, link_info,
-						       link_order,
-						       data, relocatable,
-						       symbols);
-
-  reloc_vector = bfd_malloc ((bfd_size_type) reloc_size);
-  if (reloc_vector == NULL && reloc_size != 0)
-    goto error_return;
-
-  /* Read in the section.  */
-  BFD_ASSERT (bfd_get_section_contents (input_bfd,
-					input_section,
-					data,
-					(bfd_vma) 0,
-					input_section->size));
-
-  reloc_count = bfd_canonicalize_reloc (input_bfd,
-					input_section,
-					reloc_vector,
-					symbols);
-  if (reloc_count < 0)
-    goto error_return;
-  if (reloc_count > 0)
-    {
-      arelent **parent = reloc_vector;
-      arelent *reloc ;
-      unsigned int dst_address = 0;
-      unsigned int src_address = 0;
-      unsigned int run;
-      unsigned int idx;
-
-      /* Find how long a run we can do.  */
-      while (dst_address < link_order->size)
-	{
-	  reloc = *parent;
-	  if (reloc)
-	    {
-	      /* Note that the relaxing didn't tie up the addresses in the
-		 relocation, so we use the original address to work out the
-		 run of non-relocated data.  */
-	      BFD_ASSERT (reloc->address >= src_address);
-	      run = reloc->address - src_address;
-	      parent++;
-	    }
-	  else
-	    run = link_order->size - dst_address;
-
-	  /* Copy the bytes.  */
-	  for (idx = 0; idx < run; idx++)
-	    data[dst_address++] = data[src_address++];
-
-	  /* Now do the relocation.  */
-	  if (reloc)
-	    {
-	      switch (reloc->howto->type)
-		{
-		case ABS32CODE:
-		  calljx_callback (input_bfd, link_info, reloc,
-				   src_address + data, dst_address + data,
-				   input_section);
-		  src_address += 4;
-		  dst_address += 4;
-		  break;
-		case ABS32:
-		  bfd_put_32 (input_bfd,
-			      (bfd_get_32 (input_bfd, data + src_address)
-			       + get_value (reloc, link_info, input_section)),
-			      data + dst_address);
-		  src_address += 4;
-		  dst_address += 4;
-		  break;
-		case CALLJ:
-		  callj_callback (input_bfd, link_info, reloc, data,
-				  src_address, dst_address, input_section,
-				  FALSE);
-		  src_address += 4;
-		  dst_address += 4;
-		  break;
-		case ALIGNDONE:
-		  BFD_ASSERT (reloc->addend >= src_address);
-		  BFD_ASSERT ((bfd_vma) reloc->addend
-			      <= input_section->size);
-		  src_address = reloc->addend;
-		  dst_address = ((dst_address + reloc->howto->size)
-				 & ~reloc->howto->size);
-		  break;
-		case ABS32CODE_SHRUNK:
-		  /* This used to be a callx, but we've found out that a
-		     callj will reach, so do the right thing.  */
-		  callj_callback (input_bfd, link_info, reloc, data,
-				  src_address + 4, dst_address, input_section,
-				  TRUE);
-		  dst_address += 4;
-		  src_address += 8;
-		  break;
-		case PCREL24:
-		  {
-		    long int word = bfd_get_32 (input_bfd,
-						data + src_address);
-		    bfd_vma value;
-
-		    value = get_value (reloc, link_info, input_section);
-		    word = ((word & ~BAL_MASK)
-			    | (((word & BAL_MASK)
-				+ value
-				- output_addr (input_section)
-				+ reloc->addend)
-			       & BAL_MASK));
-
-		    bfd_put_32 (input_bfd, (bfd_vma) word, data + dst_address);
-		    dst_address += 4;
-		    src_address += 4;
-
-		  }
-		  break;
-		case PCREL13:
-		  {
-		    long int word = bfd_get_32 (input_bfd,
-						data + src_address);
-		    bfd_vma value;
-
-		    value = get_value (reloc, link_info, input_section);
-		    word = ((word & ~PCREL13_MASK)
-			    | (((word & PCREL13_MASK)
-				+ value
-				+ reloc->addend
-				- output_addr (input_section))
-			       & PCREL13_MASK));
-
-		    bfd_put_32 (input_bfd, (bfd_vma) word, data + dst_address);
-		    dst_address += 4;
-		    src_address += 4;
-		  }
-		  break;
-
-		default:
-		  abort ();
-		}
-	    }
-	}
-    }
-  if (reloc_vector != NULL)
-    free (reloc_vector);
-  return data;
- error_return:
-  if (reloc_vector != NULL)
-    free (reloc_vector);
-  return NULL;
-}
-
-
-/* Build the transfer vectors for Big and Little-Endian B.OUT files.  */
-
-#define aout_32_find_line		       _bfd_nosymbols_find_line
-#define aout_32_get_symbol_version_string      _bfd_nosymbols_get_symbol_version_string
-#define aout_32_bfd_make_debug_symbol	       _bfd_nosymbols_bfd_make_debug_symbol
-#define aout_32_close_and_cleanup	       aout_32_bfd_free_cached_info
-#define b_out_bfd_link_hash_table_create       _bfd_generic_link_hash_table_create
-#define b_out_bfd_link_add_symbols	       _bfd_generic_link_add_symbols
-#define b_out_bfd_link_just_syms	       _bfd_generic_link_just_syms
-#define b_out_bfd_copy_link_hash_symbol_type \
-  _bfd_generic_copy_link_hash_symbol_type
-#define b_out_bfd_final_link		       _bfd_generic_final_link
-#define b_out_bfd_link_split_section	       _bfd_generic_link_split_section
-#define b_out_bfd_gc_sections		       bfd_generic_gc_sections
-#define b_out_bfd_lookup_section_flags	       bfd_generic_lookup_section_flags
-#define b_out_bfd_merge_sections	       bfd_generic_merge_sections
-#define b_out_bfd_is_group_section	       bfd_generic_is_group_section
-#define b_out_bfd_discard_group		       bfd_generic_discard_group
-#define b_out_section_already_linked	       _bfd_generic_section_already_linked
-#define b_out_bfd_define_common_symbol	       bfd_generic_define_common_symbol
-#define b_out_bfd_define_start_stop	       bfd_generic_define_start_stop
-#define aout_32_get_section_contents_in_window _bfd_generic_get_section_contents_in_window
-#define b_out_bfd_link_check_relocs	       _bfd_generic_link_check_relocs
-#define b_out_set_reloc			       _bfd_generic_set_reloc
-
-extern const bfd_target bout_le_vec;
-
-const bfd_target bout_be_vec =
-{
-  "b.out.big",			/* Name.  */
-  bfd_target_aout_flavour,
-  BFD_ENDIAN_LITTLE,		/* Data byte order.  */
-  BFD_ENDIAN_BIG,		/* Header byte order.  */
-  (HAS_RELOC | EXEC_P |		/* Object flags.  */
-   HAS_LINENO | HAS_DEBUG |
-   HAS_SYMS | HAS_LOCALS | WP_TEXT | BFD_IS_RELAXABLE ),
-  (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC | SEC_CODE | SEC_DATA),
-  '_',				/* Symbol leading char.  */
-  ' ',				/* AR_pad_char.  */
-  16,				/* AR_max_namelen.  */
-  0,				/* match priority.  */
-  bfd_getl64, bfd_getl_signed_64, bfd_putl64,
-     bfd_getl32, bfd_getl_signed_32, bfd_putl32,
-     bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* Data.  */
-  bfd_getb64, bfd_getb_signed_64, bfd_putb64,
-     bfd_getb32, bfd_getb_signed_32, bfd_putb32,
-     bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* Headers.  */
-
-  {				/* bfd_check_format.  */
-    _bfd_dummy_target,
-    b_out_object_p,
-    bfd_generic_archive_p,
-    _bfd_dummy_target
-  },
-  {				/* bfd_set_format.  */
-    _bfd_bool_bfd_false_error,
-    b_out_mkobject,
-    _bfd_generic_mkarchive,
-    _bfd_bool_bfd_false_error
-  },
-  {				/* bfd_write_contents.  */
-    _bfd_bool_bfd_false_error,
-    b_out_write_object_contents,
-    _bfd_write_archive_contents,
-    _bfd_bool_bfd_false_error
-  },
-
-  BFD_JUMP_TABLE_GENERIC (aout_32),
-  BFD_JUMP_TABLE_COPY (_bfd_generic),
-  BFD_JUMP_TABLE_CORE (_bfd_nocore),
-  BFD_JUMP_TABLE_ARCHIVE (_bfd_archive_bsd),
-  BFD_JUMP_TABLE_SYMBOLS (aout_32),
-  BFD_JUMP_TABLE_RELOCS (b_out),
-  BFD_JUMP_TABLE_WRITE (b_out),
-  BFD_JUMP_TABLE_LINK (b_out),
-  BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
-
-  &bout_le_vec,
-
-  NULL
-};
-
-const bfd_target bout_le_vec =
-{
-  "b.out.little",		/* Name.  */
-  bfd_target_aout_flavour,
-  BFD_ENDIAN_LITTLE,		/* Data byte order.  */
-  BFD_ENDIAN_LITTLE,		/* Header byte order.  */
-  (HAS_RELOC | EXEC_P |		/* Object flags.  */
-   HAS_LINENO | HAS_DEBUG |
-   HAS_SYMS | HAS_LOCALS | WP_TEXT | BFD_IS_RELAXABLE ),
-  (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC | SEC_CODE | SEC_DATA),
-  '_',				/* Symbol leading char.  */
-  ' ',				/* AR_pad_char.  */
-  16,				/* AR_max_namelen.  */
-  0,				/* match priority.  */
-  bfd_getl64, bfd_getl_signed_64, bfd_putl64,
-    bfd_getl32, bfd_getl_signed_32, bfd_putl32,
-     bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* Data.  */
-  bfd_getl64, bfd_getl_signed_64, bfd_putl64,
-     bfd_getl32, bfd_getl_signed_32, bfd_putl32,
-     bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* Headers.  */
-
-  {				/* bfd_check_format.  */
-    _bfd_dummy_target,
-    b_out_object_p,
-    bfd_generic_archive_p,
-    _bfd_dummy_target
-  },
-  {				/* bfd_set_format.  */
-    _bfd_bool_bfd_false_error,
-    b_out_mkobject,
-    _bfd_generic_mkarchive,
-    _bfd_bool_bfd_false_error
-  },
-  {				/* bfd_write_contents.  */
-    _bfd_bool_bfd_false_error,
-    b_out_write_object_contents,
-    _bfd_write_archive_contents,
-    _bfd_bool_bfd_false_error
-  },
-
-  BFD_JUMP_TABLE_GENERIC (aout_32),
-  BFD_JUMP_TABLE_COPY (_bfd_generic),
-  BFD_JUMP_TABLE_CORE (_bfd_nocore),
-  BFD_JUMP_TABLE_ARCHIVE (_bfd_archive_bsd),
-  BFD_JUMP_TABLE_SYMBOLS (aout_32),
-  BFD_JUMP_TABLE_RELOCS (b_out),
-  BFD_JUMP_TABLE_WRITE (b_out),
-  BFD_JUMP_TABLE_LINK (b_out),
-  BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
-
-  &bout_be_vec,
-
-  NULL
-};
diff --git a/bfd/coff-i860.c b/bfd/coff-i860.c
deleted file mode 100644
index 9ff96ea..0000000
--- a/bfd/coff-i860.c
+++ /dev/null
@@ -1,730 +0,0 @@
-/* BFD back-end for Intel i860 COFF files.
-   Copyright (C) 1990-2018 Free Software Foundation, Inc.
-   Created mostly by substituting "860" for "386" in coff-i386.c
-   Harry Dolan <dolan@ssd.intel.com>, October 1995
-
-   This file is part of BFD, the Binary File Descriptor library.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 3 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
-   MA 02110-1301, USA.  */
-
-#include "sysdep.h"
-#include "bfd.h"
-#include "libbfd.h"
-
-#include "coff/i860.h"
-
-#include "coff/internal.h"
-
-#ifndef bfd_pe_print_pdata
-#define bfd_pe_print_pdata	NULL
-#endif
-
-#include "libcoff.h"
-
-
-#define COFF_DEFAULT_SECTION_ALIGNMENT_POWER (2)
-/* The page size is a guess based on ELF.  */
-
-#define COFF_PAGE_SIZE 0x1000
-
-/* For some reason when using i860 COFF the value stored in the .text
-   section for a reference to a common symbol is the value itself plus
-   any desired offset.  Ian Taylor, Cygnus Support.  */
-
-/* If we are producing relocatable output, we need to do some
-   adjustments to the object file that are not done by the
-   bfd_perform_relocation function.  This function is called by every
-   reloc type to make any required adjustments.  */
-
-static bfd_reloc_status_type
-coff_i860_reloc (bfd *abfd,
-		 arelent *reloc_entry,
-		 asymbol *symbol,
-		 void *data,
-		 asection *input_section ATTRIBUTE_UNUSED,
-		 bfd *output_bfd,
-		 char **error_message ATTRIBUTE_UNUSED)
-{
-  symvalue diff;
-
-  if (output_bfd == (bfd *) NULL)
-    return bfd_reloc_continue;
-
-  if (bfd_is_com_section (symbol->section))
-    {
-      /* We are relocating a common symbol.  The current value in the
-	 object file is ORIG + OFFSET, where ORIG is the value of the
-	 common symbol as seen by the object file when it was compiled
-	 (this may be zero if the symbol was undefined) and OFFSET is
-	 the offset into the common symbol (normally zero, but may be
-	 non-zero when referring to a field in a common structure).
-	 ORIG is the negative of reloc_entry->addend, which is set by
-	 the CALC_ADDEND macro below.  We want to replace the value in
-	 the object file with NEW + OFFSET, where NEW is the value of
-	 the common symbol which we are going to put in the final
-	 object file.  NEW is symbol->value.  */
-      diff = symbol->value + reloc_entry->addend;
-    }
-  else
-    {
-      /* For some reason bfd_perform_relocation always effectively
-	 ignores the addend for a COFF target when producing
-	 relocatable output.  This seems to be always wrong for 860
-	 COFF, so we handle the addend here instead.  */
-      diff = reloc_entry->addend;
-    }
-
-#define DOIT(x) \
-  x = ((x & ~howto->dst_mask) | (((x & howto->src_mask) + diff) & howto->dst_mask))
-
-    if (diff != 0)
-      {
-	reloc_howto_type *howto = reloc_entry->howto;
-	unsigned char *addr = (unsigned char *) data + reloc_entry->address;
-
-	if (! bfd_reloc_offset_in_range (howto, abfd, input_section,
-					 reloc_entry->address
-					 * bfd_octets_per_byte (abfd)))
-	  return bfd_reloc_outofrange;
-
-	switch (howto->size)
-	  {
-	  case 0:
-	    {
-	      char x = bfd_get_8 (abfd, addr);
-	      DOIT (x);
-	      bfd_put_8 (abfd, x, addr);
-	    }
-	    break;
-
-	  case 1:
-	    {
-	      short x = bfd_get_16 (abfd, addr);
-	      DOIT (x);
-	      bfd_put_16 (abfd, (bfd_vma) x, addr);
-	    }
-	    break;
-
-	  case 2:
-	    {
-	      long x = bfd_get_32 (abfd, addr);
-	      DOIT (x);
-	      bfd_put_32 (abfd, (bfd_vma) x, addr);
-	    }
-	    break;
-
-	  default:
-	    abort ();
-	  }
-      }
-
-  /* Now let bfd_perform_relocation finish everything up.  */
-  return bfd_reloc_continue;
-}
-
-/* This is just a temporary measure until we teach bfd to generate
-   these relocations.  */
-
-static bfd_reloc_status_type
-coff_i860_reloc_nyi (bfd *abfd,
-		     arelent *reloc_entry,
-		     asymbol *symbol ATTRIBUTE_UNUSED,
-		     void *data ATTRIBUTE_UNUSED,
-		     asection *input_section ATTRIBUTE_UNUSED,
-		     bfd *output_bfd ATTRIBUTE_UNUSED,
-		     char **error_message ATTRIBUTE_UNUSED)
-{
-  reloc_howto_type *howto = reloc_entry->howto;
-  _bfd_error_handler (_("%pB: %s unsupported"), abfd, howto->name);
-  return bfd_reloc_notsupported;
-}
-
-#ifndef PCRELOFFSET
-#define PCRELOFFSET FALSE
-#endif
-
-static reloc_howto_type howto_table[] =
-{
-  EMPTY_HOWTO (0),
-  EMPTY_HOWTO (1),
-  EMPTY_HOWTO (2),
-  EMPTY_HOWTO (3),
-  EMPTY_HOWTO (4),
-  EMPTY_HOWTO (5),
-  HOWTO (R_DIR32,		/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 32,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_bitfield, /* complain_on_overflow */
-	 coff_i860_reloc,	/* special_function */
-	 "dir32",		/* name */
-	 TRUE,			/* partial_inplace */
-	 0xffffffff,		/* src_mask */
-	 0xffffffff,		/* dst_mask */
-	 TRUE),		       /* pcrel_offset */
-  /* {7}, */
-  HOWTO (R_IMAGEBASE,		 /* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 32,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_bitfield, /* complain_on_overflow */
-	 coff_i860_reloc,	/* special_function */
-	 "rva32",		   /* name */
-	 TRUE,			/* partial_inplace */
-	 0xffffffff,		/* src_mask */
-	 0xffffffff,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-  EMPTY_HOWTO (010),
-  EMPTY_HOWTO (011),
-  EMPTY_HOWTO (012),
-  EMPTY_HOWTO (013),
-  EMPTY_HOWTO (014),
-  EMPTY_HOWTO (015),
-  EMPTY_HOWTO (016),
-  HOWTO (R_RELBYTE,		/* type */
-	 0,			/* rightshift */
-	 0,			/* size (0 = byte, 1 = short, 2 = long) */
-	 8,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_bitfield, /* complain_on_overflow */
-	 coff_i860_reloc,	/* special_function */
-	 "8",			/* name */
-	 TRUE,			/* partial_inplace */
-	 0x000000ff,		/* src_mask */
-	 0x000000ff,		/* dst_mask */
-	 PCRELOFFSET),		/* pcrel_offset */
-  HOWTO (R_RELWORD,		/* type */
-	 0,			/* rightshift */
-	 1,			/* size (0 = byte, 1 = short, 2 = long) */
-	 16,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_bitfield, /* complain_on_overflow */
-	 coff_i860_reloc,	/* special_function */
-	 "16",			/* name */
-	 TRUE,			/* partial_inplace */
-	 0x0000ffff,		/* src_mask */
-	 0x0000ffff,		/* dst_mask */
-	 PCRELOFFSET),		/* pcrel_offset */
-  HOWTO (R_RELLONG,		/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 32,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_bitfield, /* complain_on_overflow */
-	 coff_i860_reloc,	/* special_function */
-	 "32",			/* name */
-	 TRUE,			/* partial_inplace */
-	 0xffffffff,		/* src_mask */
-	 0xffffffff,		/* dst_mask */
-	 PCRELOFFSET),		/* pcrel_offset */
-  HOWTO (R_PCRBYTE,		/* type */
-	 0,			/* rightshift */
-	 0,			/* size (0 = byte, 1 = short, 2 = long) */
-	 8,			/* bitsize */
-	 TRUE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_signed, /* complain_on_overflow */
-	 coff_i860_reloc,	/* special_function */
-	 "DISP8",		/* name */
-	 TRUE,			/* partial_inplace */
-	 0x000000ff,		/* src_mask */
-	 0x000000ff,		/* dst_mask */
-	 PCRELOFFSET),		/* pcrel_offset */
-  HOWTO (R_PCRWORD,		/* type */
-	 0,			/* rightshift */
-	 1,			/* size (0 = byte, 1 = short, 2 = long) */
-	 16,			/* bitsize */
-	 TRUE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_signed, /* complain_on_overflow */
-	 coff_i860_reloc,	/* special_function */
-	 "DISP16",		/* name */
-	 TRUE,			/* partial_inplace */
-	 0x0000ffff,		/* src_mask */
-	 0x0000ffff,		/* dst_mask */
-	 PCRELOFFSET),		/* pcrel_offset */
-  HOWTO (R_PCRLONG,		/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 32,			/* bitsize */
-	 TRUE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_signed, /* complain_on_overflow */
-	 coff_i860_reloc,	/* special_function */
-	 "DISP32",		/* name */
-	 TRUE,			/* partial_inplace */
-	 0xffffffff,		/* src_mask */
-	 0xffffffff,		/* dst_mask */
-	 PCRELOFFSET),		/* pcrel_offset */
-  EMPTY_HOWTO (0x15),
-  EMPTY_HOWTO (0x16),
-  EMPTY_HOWTO (0x17),
-  EMPTY_HOWTO (0x18),
-  EMPTY_HOWTO (0x19),
-  EMPTY_HOWTO (0x1a),
-  EMPTY_HOWTO (0x1b),
-  HOWTO (COFF860_R_PAIR,	/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 16,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-	 coff_i860_reloc_nyi,	/* special_function */
-	 "PAIR",		/* name */
-	 FALSE,			/* partial_inplace */
-	 0xffff,		/* src_mask */
-	 0xffff,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-  EMPTY_HOWTO (0x1d),
-  HOWTO (COFF860_R_HIGH,	/* type */
-	 16,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 16,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-	 coff_i860_reloc,	/* special_function */
-	 "HIGH",		/* name */
-	 FALSE,			/* partial_inplace */
-	 0xffff,		/* src_mask */
-	 0xffff,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-  HOWTO (COFF860_R_LOW0,	/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 16,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-	 coff_i860_reloc,	/* special_function */
-	 "LOW0",		/* name */
-	 FALSE,			/* partial_inplace */
-	 0xffff,		/* src_mask */
-	 0xffff,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-  HOWTO (COFF860_R_LOW1,	/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 16,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-	 coff_i860_reloc,	/* special_function */
-	 "LOW1",		/* name */
-	 FALSE,			/* partial_inplace */
-	 0xfffe,		/* src_mask */
-	 0xfffe,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-  HOWTO (COFF860_R_LOW2,	/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 16,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-	 coff_i860_reloc,	/* special_function */
-	 "LOW2",		/* name */
-	 FALSE,			/* partial_inplace */
-	 0xfffc,		/* src_mask */
-	 0xfffc,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-  HOWTO (COFF860_R_LOW3,	/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 16,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-	 coff_i860_reloc,	/* special_function */
-	 "LOW3",		/* name */
-	 FALSE,			/* partial_inplace */
-	 0xfff8,		/* src_mask */
-	 0xfff8,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-  HOWTO (COFF860_R_LOW4,	/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 16,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-	 coff_i860_reloc,	/* special_function */
-	 "LOW4",		/* name */
-	 FALSE,			/* partial_inplace */
-	 0xfff0,		/* src_mask */
-	 0xfff0,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-  HOWTO (COFF860_R_SPLIT0,	/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 16,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-	 coff_i860_reloc_nyi,	/* special_function */
-	 "SPLIT0",		/* name */
-	 FALSE,			/* partial_inplace */
-	 0x1f07ff,		/* src_mask */
-	 0x1f07ff,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-  HOWTO (COFF860_R_SPLIT1,	/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 16,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-	 coff_i860_reloc_nyi,	/* special_function */
-	 "SPLIT1",		/* name */
-	 FALSE,			/* partial_inplace */
-	 0x1f07fe,		/* src_mask */
-	 0x1f07fe,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-  HOWTO (COFF860_R_SPLIT2,	/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 16,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-	 coff_i860_reloc_nyi,	/* special_function */
-	 "SPLIT2",		/* name */
-	 FALSE,			/* partial_inplace */
-	 0x1f07fc,		/* src_mask */
-	 0x1f07fc,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-  HOWTO (COFF860_R_HIGHADJ,	/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 16,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-	 coff_i860_reloc_nyi,	/* special_function */
-	 "HIGHADJ",		/* name */
-	 FALSE,			/* partial_inplace */
-	 0xffff,		/* src_mask */
-	 0xffff,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-  HOWTO (COFF860_R_BRADDR,	/* type */
-	 2,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 26,			/* bitsize */
-	 TRUE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_bitfield, /* complain_on_overflow */
-	 coff_i860_reloc_nyi,	/* special_function */
-	 "BRADDR",		/* name */
-	 FALSE,			/* partial_inplace */
-	 0x3ffffff,		/* src_mask */
-	 0x3ffffff,		/* dst_mask */
-	 TRUE)			/* pcrel_offset */
-};
-
-/* Turn a howto into a reloc number.  */
-
-#define SELECT_RELOC(x,howto) { x.r_type = howto->type; }
-#define BADMAG(x) I860BADMAG(x)
-#define I860 1			/* Customize coffcode.h */
-
-#define RTYPE2HOWTO(cache_ptr, dst)					\
-  ((cache_ptr)->howto =							\
-   ((dst)->r_type < sizeof (howto_table) / sizeof (howto_table[0])	\
-    ? howto_table + (dst)->r_type					\
-    : NULL))
-
-/* For 860 COFF a STYP_NOLOAD | STYP_BSS section is part of a shared
-   library.  On some other COFF targets STYP_BSS is normally
-   STYP_NOLOAD.  */
-#define BSS_NOLOAD_IS_SHARED_LIBRARY
-
-/* Compute the addend of a reloc.  If the reloc is to a common symbol,
-   the object file contains the value of the common symbol.  By the
-   time this is called, the linker may be using a different symbol
-   from a different object file with a different value.  Therefore, we
-   hack wildly to locate the original symbol from this file so that we
-   can make the correct adjustment.  This macro sets coffsym to the
-   symbol from the original file, and uses it to set the addend value
-   correctly.  If this is not a common symbol, the usual addend
-   calculation is done, except that an additional tweak is needed for
-   PC relative relocs.
-   FIXME: This macro refers to symbols and asect; these are from the
-   calling function, not the macro arguments.  */
-
-/* PR 17512: file: 0a38fb7c
-   Set an addend value, even if it is not going to be used.  A tool
-   like coffdump might be used to print out the contents of the reloc.  */
-#define CALC_ADDEND(abfd, ptr, reloc, cache_ptr) (cache_ptr)->addend = 0
-
-/* We use the special COFF backend linker.  */
-#define coff_relocate_section _bfd_coff_generic_relocate_section
-
-static reloc_howto_type *
-coff_i860_rtype_to_howto (bfd *abfd ATTRIBUTE_UNUSED,
-			  asection *sec,
-			  struct internal_reloc *rel,
-			  struct coff_link_hash_entry *h,
-			  struct internal_syment *sym,
-			  bfd_vma *addendp)
-{
-
-  reloc_howto_type *howto;
-
-  if (rel->r_type > sizeof (howto_table) / sizeof (howto_table[0]))
-    {
-      bfd_set_error (bfd_error_bad_value);
-      return NULL;
-    }
-
-  howto = howto_table + rel->r_type;
-
-  if (howto->pc_relative)
-    *addendp += sec->vma;
-
-  if (sym != NULL && sym->n_scnum == 0 && sym->n_value != 0)
-    {
-      /* This is a common symbol.  The section contents include the
-	 size (sym->n_value) as an addend.  The relocate_section
-	 function will be adding in the final value of the symbol.  We
-	 need to subtract out the current size in order to get the
-	 correct result.  */
-
-      BFD_ASSERT (h != NULL);
-
-      /* I think we *do* want to bypass this.  If we don't, I have seen some data
-	 parameters get the wrong relocation address.  If I link two versions
-	 with and without this section bypassed and then do a binary comparison,
-	 the addresses which are different can be looked up in the map.  The
-	 case in which this section has been bypassed has addresses which correspond
-	 to values I can find in the map.  */
-      *addendp -= sym->n_value;
-    }
-
-  /* If the output symbol is common (in which case this must be a
-     relocatable link), we need to add in the final size of the
-     common symbol.  */
-  if (h != NULL && h->root.type == bfd_link_hash_common)
-    *addendp += h->root.u.c.size;
-
-  return howto;
-}
-
-static reloc_howto_type *
-coff_i860_reloc_type_lookup (bfd *abfd ATTRIBUTE_UNUSED,
-			     bfd_reloc_code_real_type code)
-{
-  switch (code)
-    {
-    case BFD_RELOC_32:
-      return howto_table + R_DIR32;
-    case BFD_RELOC_860_PC26:
-      return howto_table + COFF860_R_BRADDR;
-    case BFD_RELOC_860_PC16:
-      /* ??? How to handle PC16 for COFF?  SPLIT0 is close for now.  */
-      return howto_table + COFF860_R_SPLIT0;
-    case BFD_RELOC_860_LOW0:
-      return howto_table + COFF860_R_LOW0;
-    case BFD_RELOC_860_SPLIT0:
-      return howto_table + COFF860_R_SPLIT0;
-    case BFD_RELOC_860_LOW1:
-      return howto_table + COFF860_R_LOW1;
-    case BFD_RELOC_860_SPLIT1:
-      return howto_table + COFF860_R_SPLIT1;
-    case BFD_RELOC_860_LOW2:
-      return howto_table + COFF860_R_LOW2;
-    case BFD_RELOC_860_SPLIT2:
-      return howto_table + COFF860_R_SPLIT2;
-    case BFD_RELOC_860_LOW3:
-      return howto_table + COFF860_R_LOW3;
-    case BFD_RELOC_860_HIGHADJ:
-      return howto_table + COFF860_R_HIGHADJ;
-    case BFD_RELOC_860_HIGH:
-      return howto_table + COFF860_R_HIGH;
-    default:
-      BFD_FAIL ();
-      return 0;
-    }
-}
-
-static reloc_howto_type *
-coff_i860_reloc_name_lookup (bfd *abfd ATTRIBUTE_UNUSED,
-			     const char *r_name)
-{
-  unsigned int i;
-
-  for (i = 0; i < sizeof (howto_table) / sizeof (howto_table[0]); i++)
-    if (howto_table[i].name != NULL
-	&& strcasecmp (howto_table[i].name, r_name) == 0)
-      return &howto_table[i];
-
-  return NULL;
-}
-
-/* This is called from coff_slurp_reloc_table for each relocation
-   entry.  This special handling is due to the `PAIR' relocation
-   which has a different meaning for the `r_symndx' field.  */
-
-static void
-i860_reloc_processing (arelent *cache_ptr, struct internal_reloc *dst,
-		       asymbol **symbols, bfd *abfd, asection *asect)
-{
-  if (dst->r_type == COFF860_R_PAIR)
-    {
-      /* Handle the PAIR relocation specially.  */
-      cache_ptr->howto = howto_table + dst->r_type;
-      cache_ptr->address = dst->r_vaddr;
-      cache_ptr->addend = dst->r_symndx;
-      cache_ptr->sym_ptr_ptr= bfd_abs_section_ptr->symbol_ptr_ptr;
-    }
-  else
-    {
-      /* For every other relocation, do exactly what coff_slurp_reloc_table
-	 would do (which this code is taken directly from).  */
-      asymbol *ptr = NULL;
-      cache_ptr->address = dst->r_vaddr;
-
-      if (dst->r_symndx != -1)
-	{
-	  if (dst->r_symndx < 0 || dst->r_symndx >= obj_conv_table_size (abfd))
-	    {
-	      _bfd_error_handler
-		/* xgettext: c-format */
-		(_("%pB: warning: illegal symbol index %ld in relocs"),
-		 abfd, dst->r_symndx);
-	      cache_ptr->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr;
-	      ptr = NULL;
-	    }
-	  else
-	    {
-	      cache_ptr->sym_ptr_ptr = (symbols
-					+ obj_convert (abfd)[dst->r_symndx]);
-	      ptr = *(cache_ptr->sym_ptr_ptr);
-	    }
-	}
-      else
-	{
-	  cache_ptr->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr;
-	  ptr = NULL;
-	}
-
-      /* The symbols definitions that we have read in have been
-	 relocated as if their sections started at 0. But the offsets
-	 refering to the symbols in the raw data have not been
-	 modified, so we have to have a negative addend to compensate.
-
-	 Note that symbols which used to be common must be left alone.  */
-
-      /* Calculate any reloc addend by looking at the symbol.  */
-      CALC_ADDEND (abfd, ptr, (*dst), cache_ptr);
-      (void) ptr;
-
-      cache_ptr->address -= asect->vma;
-
-      /* Fill in the cache_ptr->howto field from dst->r_type.  */
-      RTYPE2HOWTO (cache_ptr, dst);
-    }
-}
-
-#define coff_rtype_to_howto		coff_i860_rtype_to_howto
-#define coff_bfd_reloc_type_lookup	coff_i860_reloc_type_lookup
-#define coff_bfd_reloc_name_lookup coff_i860_reloc_name_lookup
-
-#define RELOC_PROCESSING(relent, reloc, symbols, abfd, section) \
-  i860_reloc_processing (relent, reloc, symbols, abfd, section)
-
-#include "coffcode.h"
-
-static const bfd_target *
-i3coff_object_p(bfd *a)
-{
-  return coff_object_p (a);
-}
-
-const bfd_target
-#ifdef TARGET_SYM
-  TARGET_SYM =
-#else
-  i860_coff_vec =
-#endif
-{
-#ifdef TARGET_NAME
-  TARGET_NAME,
-#else
-  "coff-i860",			/* name */
-#endif
-  bfd_target_coff_flavour,
-  BFD_ENDIAN_LITTLE,		/* data byte order is little */
-  BFD_ENDIAN_LITTLE,		/* header byte order is little */
-
-  (HAS_RELOC | EXEC_P		/* object flags */
-   | HAS_LINENO | HAS_DEBUG
-   | HAS_SYMS | HAS_LOCALS | WP_TEXT | D_PAGED),
-
-  (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC), /* section flags */
-  '_',				/* leading underscore */
-  '/',				/* ar_pad_char */
-  15,				/* ar_max_namelen */
-  0,				/* match priority.  */
-
-  bfd_getl64, bfd_getl_signed_64, bfd_putl64,
-     bfd_getl32, bfd_getl_signed_32, bfd_putl32,
-     bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* data */
-  bfd_getl64, bfd_getl_signed_64, bfd_putl64,
-     bfd_getl32, bfd_getl_signed_32, bfd_putl32,
-     bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* hdrs */
-
-/* Note that we allow an object file to be treated as a core file as well.  */
-  {				/* bfd_check_format */
-    _bfd_dummy_target,
-    i3coff_object_p,
-    bfd_generic_archive_p,
-    i3coff_object_p
-  },
-  {				/* bfd_set_format */
-    _bfd_bool_bfd_false_error,
-    coff_mkobject,
-    _bfd_generic_mkarchive,
-    _bfd_bool_bfd_false_error
-  },
-  {				/* bfd_write_contents */
-    _bfd_bool_bfd_false_error,
-    coff_write_object_contents,
-    _bfd_write_archive_contents,
-    _bfd_bool_bfd_false_error
-  },
-
-  BFD_JUMP_TABLE_GENERIC (coff),
-  BFD_JUMP_TABLE_COPY (coff),
-  BFD_JUMP_TABLE_CORE (_bfd_nocore),
-  BFD_JUMP_TABLE_ARCHIVE (_bfd_archive_coff),
-  BFD_JUMP_TABLE_SYMBOLS (coff),
-  BFD_JUMP_TABLE_RELOCS (coff),
-  BFD_JUMP_TABLE_WRITE (coff),
-  BFD_JUMP_TABLE_LINK (coff),
-  BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
-
-  NULL,
-
-  COFF_SWAP_TABLE
-};
diff --git a/bfd/coff-i960.c b/bfd/coff-i960.c
deleted file mode 100644
index 4e68d44..0000000
--- a/bfd/coff-i960.c
+++ /dev/null
@@ -1,666 +0,0 @@
-/* BFD back-end for Intel 960 COFF files.
-   Copyright (C) 1990-2018 Free Software Foundation, Inc.
-   Written by Cygnus Support.
-
-   This file is part of BFD, the Binary File Descriptor library.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 3 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
-   MA 02110-1301, USA.  */
-
-#define I960 1
-#define BADMAG(x) I960BADMAG(x)
-
-#include "sysdep.h"
-#include "bfd.h"
-#include "libbfd.h"
-#include "coff/i960.h"
-#include "coff/internal.h"
-
-#ifndef bfd_pe_print_pdata
-#define bfd_pe_print_pdata	NULL
-#endif
-
-#include "libcoff.h"		/* To allow easier abstraction-breaking.  */
-
-
-#define COFF_DEFAULT_SECTION_ALIGNMENT_POWER (3)
-#define COFF_ALIGN_IN_SECTION_HEADER 1
-
-#define GET_SCNHDR_ALIGN H_GET_32
-#define PUT_SCNHDR_ALIGN H_PUT_32
-
-/* The i960 does not support an MMU, so COFF_PAGE_SIZE can be
-   arbitrarily small.  */
-#define COFF_PAGE_SIZE 1
-
-#define COFF_LONG_FILENAMES
-
-/* This set of local label names is taken from gas.  */
-
-static bfd_boolean
-coff_i960_is_local_label_name (bfd *abfd ATTRIBUTE_UNUSED, const char *name)
-{
-  return (name[0] == 'L'
-	  || (name[0] == '.'
-	      && (name[1] == 'C'
-		  || name[1] == 'I'
-		  || name[1] == '.')));
-}
-
-/* This is just like the usual CALC_ADDEND, but it includes the
-   section VMA for PC relative relocs.  */
-#ifndef CALC_ADDEND
-#define CALC_ADDEND(abfd, ptr, reloc, cache_ptr)		\
-  {								\
-    coff_symbol_type *coffsym = (coff_symbol_type *) NULL;	\
-    if (ptr && bfd_asymbol_bfd (ptr) != abfd)			\
-      coffsym = (obj_symbols (abfd)				\
-		 + (cache_ptr->sym_ptr_ptr - symbols));		\
-    else if (ptr)						\
-      coffsym = coff_symbol_from (ptr);				\
-    if (coffsym != (coff_symbol_type *) NULL			\
-	&& coffsym->native->u.syment.n_scnum == 0)		\
-      cache_ptr->addend = 0;					\
-    else if (ptr && bfd_asymbol_bfd (ptr) == abfd		\
-	     && ptr->section != (asection *) NULL)		\
-      cache_ptr->addend = - (ptr->section->vma + ptr->value);	\
-    else							\
-      cache_ptr->addend = 0;					\
-    if (ptr && (reloc.r_type == 25 || reloc.r_type == 27))	\
-      cache_ptr->addend += asect->vma;				\
-  }
-#endif
-
-#define CALLS	 0x66003800	/* Template for 'calls' instruction	*/
-#define BAL	 0x0b000000	/* Template for 'bal' instruction	*/
-#define BAL_MASK 0x00ffffff
-
-static bfd_reloc_status_type
-optcall_callback (bfd *abfd,
-		  arelent *reloc_entry,
-		  asymbol *symbol_in,
-		  void * data,
-		  asection *input_section,
-		  bfd *ignore_bfd ATTRIBUTE_UNUSED,
-		  char **error_message)
-{
-  /* This item has already been relocated correctly, but we may be
-   * able to patch in yet better code - done by digging out the
-   * correct info on this symbol */
-  bfd_reloc_status_type result;
-  coff_symbol_type *cs = coffsymbol(symbol_in);
-
-  /* Don't do anything with symbols which aren't tied up yet,
-     except move the reloc.  */
-  if (bfd_is_und_section (cs->symbol.section)) {
-    reloc_entry->address += input_section->output_offset;
-    return bfd_reloc_ok;
-  }
-
-  /* So the target symbol has to be of coff type, and the symbol
-     has to have the correct native information within it */
-  if ((bfd_asymbol_flavour(&cs->symbol) != bfd_target_coff_flavour)
-      || (cs->native == (combined_entry_type *)NULL))
-    {
-      /* This is interesting, consider the case where we're outputting coff
-	 from a mix n match input, linking from coff to a symbol defined in a
-	 bout file will cause this match to be true. Should I complain?  This
-	 will only work if the bout symbol is non leaf.  */
-      *error_message =
-	(char *) _("uncertain calling convention for non-COFF symbol");
-      result = bfd_reloc_dangerous;
-    }
-  else
-    {
-    switch (cs->native->u.syment.n_sclass)
-      {
-      case C_LEAFSTAT:
-      case C_LEAFEXT:
-	/* This is a call to a leaf procedure, replace instruction with a bal
-	   to the correct location.  */
-	{
-	  union internal_auxent *aux = &((cs->native+2)->u.auxent);
-	  int word = bfd_get_32 (abfd, (bfd_byte *)data + reloc_entry->address);
-	  int olf = (aux->x_bal.x_balntry - cs->native->u.syment.n_value);
-	  BFD_ASSERT(cs->native->u.syment.n_numaux==2);
-
-	  /* We replace the original call instruction with a bal to
-	     the bal entry point - the offset of which is described in
-	     the 2nd auxent of the original symbol. We keep the native
-	     sym and auxents untouched, so the delta between the two
-	     is the offset of the bal entry point.  */
-	  word = ((word +  olf)  & BAL_MASK) | BAL;
-	  bfd_put_32 (abfd, (bfd_vma) word,
-		      (bfd_byte *) data + reloc_entry->address);
-	}
-	result = bfd_reloc_ok;
-	break;
-      case C_SCALL:
-	/* This is a call to a system call, replace with a calls to # */
-	BFD_ASSERT(0);
-	result = bfd_reloc_ok;
-	break;
-      default:
-	result = bfd_reloc_ok;
-	break;
-      }
-  }
-  return result;
-}
-
-/* i960 COFF is used by VxWorks 5.1.  However, VxWorks 5.1 does not
-   appear to correctly handle a reloc against a symbol defined in the
-   same object file.  It appears to simply discard such relocs, rather
-   than adding their values into the object file.  We handle this here
-   by converting all relocs against defined symbols into relocs
-   against the section symbol, when generating a relocatable output
-   file.
-
-   Note that this function is only called if we are not using the COFF
-   specific backend linker.  It only does something when doing a
-   relocatable link, which will almost certainly fail when not
-   generating COFF i960 output, so this function is actually no longer
-   useful.  It was used before this target was converted to use the
-   COFF specific backend linker.  */
-
-static bfd_reloc_status_type
-coff_i960_relocate (bfd *abfd,
-		    arelent *reloc_entry,
-		    asymbol *symbol,
-		    void * data ATTRIBUTE_UNUSED,
-		    asection *input_section ATTRIBUTE_UNUSED,
-		    bfd *output_bfd,
-		    char **error_message ATTRIBUTE_UNUSED)
-{
-  asection *osec;
-
-  if (output_bfd == NULL)
-    {
-      /* Not generating relocatable output file.  */
-      return bfd_reloc_continue;
-    }
-
-  if (bfd_is_und_section (bfd_get_section (symbol)))
-    {
-      /* Symbol is not defined, so no need to worry about it.  */
-      return bfd_reloc_continue;
-    }
-
-  if (bfd_is_com_section (bfd_get_section (symbol)))
-    {
-      /* I don't really know what the right action is for a common
-	 symbol.  */
-      return bfd_reloc_continue;
-    }
-
-  /* Convert the reloc to use the section symbol.  FIXME: This method
-     is ridiculous.  */
-  osec = bfd_get_section (symbol)->output_section;
-  if (coff_section_data (output_bfd, osec) != NULL
-      && coff_section_data (output_bfd, osec)->tdata != NULL)
-    reloc_entry->sym_ptr_ptr =
-      (asymbol **) coff_section_data (output_bfd, osec)->tdata;
-  else
-    {
-      const char *sec_name;
-      asymbol **syms, **sym_end;
-
-      sec_name = bfd_get_section_name (output_bfd, osec);
-      syms = bfd_get_outsymbols (output_bfd);
-      sym_end = syms + bfd_get_symcount (output_bfd);
-      for (; syms < sym_end; syms++)
-	{
-	  if (bfd_asymbol_name (*syms) != NULL
-	      && (*syms)->value == 0
-	      && strcmp ((*syms)->section->output_section->name,
-			 sec_name) == 0)
-	    break;
-	}
-
-      if (syms >= sym_end)
-	abort ();
-
-      reloc_entry->sym_ptr_ptr = syms;
-
-      if (coff_section_data (output_bfd, osec) == NULL)
-	{
-	  bfd_size_type amt = sizeof (struct coff_section_tdata);
-	  osec->used_by_bfd = bfd_zalloc (abfd, amt);
-	  if (osec->used_by_bfd == NULL)
-	    return bfd_reloc_overflow;
-	}
-      coff_section_data (output_bfd, osec)->tdata = syms;
-    }
-
-  /* Let bfd_perform_relocation do its thing, which will include
-     stuffing the symbol addend into the object file.  */
-  return bfd_reloc_continue;
-}
-
-static reloc_howto_type howto_rellong =
-  HOWTO ((unsigned int) R_RELLONG, 0, 2, 32,FALSE, 0,
-	 complain_overflow_bitfield, coff_i960_relocate,"rellong", TRUE,
-	 0xffffffff, 0xffffffff, 0);
-static reloc_howto_type howto_iprmed =
-  HOWTO (R_IPRMED, 0, 2, 24,TRUE,0, complain_overflow_signed,
-	 coff_i960_relocate, "iprmed ", TRUE, 0x00ffffff, 0x00ffffff, 0);
-static reloc_howto_type howto_optcall =
-  HOWTO (R_OPTCALL, 0,2,24,TRUE,0, complain_overflow_signed,
-	 optcall_callback, "optcall", TRUE, 0x00ffffff, 0x00ffffff, 0);
-
-static reloc_howto_type *
-coff_i960_reloc_type_lookup (bfd *abfd ATTRIBUTE_UNUSED,
-			     bfd_reloc_code_real_type code)
-{
-  switch (code)
-    {
-    default:
-      return 0;
-    case BFD_RELOC_I960_CALLJ:
-      return &howto_optcall;
-    case BFD_RELOC_32:
-    case BFD_RELOC_CTOR:
-      return &howto_rellong;
-    case BFD_RELOC_24_PCREL:
-      return &howto_iprmed;
-    }
-}
-
-static reloc_howto_type *
-coff_i960_reloc_name_lookup (bfd *abfd ATTRIBUTE_UNUSED,
-			     const char *r_name)
-{
-  if (strcasecmp (howto_optcall.name, r_name) == 0)
-    return &howto_optcall;
-  if (strcasecmp (howto_rellong.name, r_name) == 0)
-    return &howto_rellong;
-  if (strcasecmp (howto_iprmed.name, r_name) == 0)
-    return &howto_iprmed;
-
-  return NULL;
-}
-
-/* The real code is in coffcode.h */
-
-#define RTYPE2HOWTO(cache_ptr, dst) \
-{							\
-   reloc_howto_type *howto_ptr;				\
-   switch ((dst)->r_type) {				\
-     case 17: howto_ptr = &howto_rellong; break;	\
-     case 25: howto_ptr = &howto_iprmed; break;		\
-     case 27: howto_ptr = &howto_optcall; break;	\
-     default: howto_ptr = 0; break;			\
-     }							\
-   (cache_ptr)->howto = howto_ptr;			\
- }
-
-/* i960 COFF is used by VxWorks 5.1.  However, VxWorks 5.1 does not
-   appear to correctly handle a reloc against a symbol defined in the
-   same object file.  It appears to simply discard such relocs, rather
-   than adding their values into the object file.  We handle this by
-   converting all relocs against global symbols into relocs against
-   internal symbols at the start of the section.  This routine is
-   called at the start of the linking process, and it creates the
-   necessary symbols.  */
-
-static bfd_boolean
-coff_i960_start_final_link (bfd *abfd, struct bfd_link_info *info)
-{
-  bfd_size_type symesz = bfd_coff_symesz (abfd);
-  asection *o;
-  bfd_byte *esym;
-
-  if (! bfd_link_relocatable (info))
-    return TRUE;
-
-  esym = (bfd_byte *) bfd_malloc (symesz);
-  if (esym == NULL)
-    return FALSE;
-
-  if (bfd_seek (abfd, obj_sym_filepos (abfd), SEEK_SET) != 0)
-    return FALSE;
-
-  for (o = abfd->sections; o != NULL; o = o->next)
-    {
-      struct internal_syment isym;
-
-      strncpy (isym._n._n_name, o->name, SYMNMLEN);
-      isym.n_value = 0;
-      isym.n_scnum = o->target_index;
-      isym.n_type = T_NULL;
-      isym.n_sclass = C_STAT;
-      isym.n_numaux = 0;
-
-      bfd_coff_swap_sym_out (abfd, &isym, esym);
-
-      if (bfd_bwrite (esym, symesz, abfd) != symesz)
-	{
-	  free (esym);
-	  return FALSE;
-	}
-
-      obj_raw_syment_count (abfd) += 1;
-    }
-
-  free (esym);
-
-  return TRUE;
-}
-
-/* The reloc processing routine for the optimized COFF linker.  */
-
-static bfd_boolean
-coff_i960_relocate_section (bfd *output_bfd ATTRIBUTE_UNUSED,
-			    struct bfd_link_info *info,
-			    bfd *input_bfd,
-			    asection *input_section,
-			    bfd_byte *contents,
-			    struct internal_reloc *relocs,
-			    struct internal_syment *syms,
-			    asection **sections)
-{
-  struct internal_reloc *rel;
-  struct internal_reloc *relend;
-
-  rel = relocs;
-  relend = rel + input_section->reloc_count;
-  for (; rel < relend; rel++)
-    {
-      long symndx;
-      struct coff_link_hash_entry *h;
-      struct internal_syment *sym;
-      bfd_vma addend;
-      bfd_vma val;
-      reloc_howto_type *howto;
-      bfd_reloc_status_type rstat = bfd_reloc_ok;
-      bfd_boolean done;
-
-      symndx = rel->r_symndx;
-
-      if (symndx == -1)
-	{
-	  h = NULL;
-	  sym = NULL;
-	}
-      else
-	{
-	  h = obj_coff_sym_hashes (input_bfd)[symndx];
-	  sym = syms + symndx;
-	}
-
-      if (sym != NULL && sym->n_scnum != 0)
-	addend = - sym->n_value;
-      else
-	addend = 0;
-
-      switch (rel->r_type)
-	{
-	case 17: howto = &howto_rellong; break;
-	case 25: howto = &howto_iprmed; break;
-	case 27: howto = &howto_optcall; break;
-	default:
-	  bfd_set_error (bfd_error_bad_value);
-	  return FALSE;
-	}
-
-      val = 0;
-
-      if (h == NULL)
-	{
-	  asection *sec;
-
-	  if (symndx == -1)
-	    {
-	      sec = bfd_abs_section_ptr;
-	      val = 0;
-	    }
-	  else
-	    {
-	      sec = sections[symndx];
-	      val = (sec->output_section->vma
-		     + sec->output_offset
-		     + sym->n_value
-		     - sec->vma);
-	    }
-	}
-      else
-	{
-	  if (h->root.type == bfd_link_hash_defined
-	      || h->root.type == bfd_link_hash_defweak)
-	    {
-	      asection *sec;
-
-	      sec = h->root.u.def.section;
-	      val = (h->root.u.def.value
-		     + sec->output_section->vma
-		     + sec->output_offset);
-	    }
-	  else if (! bfd_link_relocatable (info))
-	    (*info->callbacks->undefined_symbol)
-	      (info, h->root.root.string, input_bfd, input_section,
-	       rel->r_vaddr - input_section->vma, TRUE);
-	}
-
-      done = FALSE;
-
-      if (howto->type == R_OPTCALL && ! bfd_link_relocatable (info) && symndx != -1)
-	{
-	  int class_val;
-
-	  if (h != NULL)
-	    class_val = h->symbol_class;
-	  else
-	    class_val = sym->n_sclass;
-
-	  switch (class_val)
-	    {
-	    case C_NULL:
-	      /* This symbol is apparently not from a COFF input file.
-		 We warn, and then assume that it is not a leaf
-		 function.  */
-	      (*info->callbacks->reloc_dangerous)
-		(info,
-		 _("uncertain calling convention for non-COFF symbol"),
-		 input_bfd, input_section,
-		 rel->r_vaddr - input_section->vma);
-	      break;
-	    case C_LEAFSTAT:
-	    case C_LEAFEXT:
-	      /* This is a call to a leaf procedure; use the bal
-		 instruction.  */
-	      {
-		long olf;
-		unsigned long word;
-
-		if (h != NULL)
-		  {
-		    BFD_ASSERT (h->numaux == 2);
-		    olf = h->aux[1].x_bal.x_balntry;
-		  }
-		else
-		  {
-		    bfd_byte *esyms;
-		    union internal_auxent aux;
-
-		    BFD_ASSERT (sym->n_numaux == 2);
-		    esyms = (bfd_byte *) obj_coff_external_syms (input_bfd);
-		    esyms += (symndx + 2) * bfd_coff_symesz (input_bfd);
-		    bfd_coff_swap_aux_in (input_bfd, esyms, sym->n_type,
-					  sym->n_sclass, 1, sym->n_numaux,
-					  &aux);
-		    olf = aux.x_bal.x_balntry;
-		  }
-
-		word = bfd_get_32 (input_bfd,
-				   (contents
-				    + (rel->r_vaddr - input_section->vma)));
-		word = ((word + olf - val) & BAL_MASK) | BAL;
-		bfd_put_32 (input_bfd,
-			    (bfd_vma) word,
-			    contents + (rel->r_vaddr - input_section->vma));
-		done = TRUE;
-	      }
-	      break;
-	    case C_SCALL:
-	      BFD_ASSERT (0);
-	      break;
-	    }
-	}
-
-      if (! done)
-	{
-	  if (howto->pc_relative)
-	    addend += input_section->vma;
-	  rstat = _bfd_final_link_relocate (howto, input_bfd, input_section,
-					    contents,
-					    rel->r_vaddr - input_section->vma,
-					    val, addend);
-	}
-
-      switch (rstat)
-	{
-	default:
-	  abort ();
-	case bfd_reloc_ok:
-	  break;
-	case bfd_reloc_overflow:
-	  {
-	    const char *name;
-	    char buf[SYMNMLEN + 1];
-
-	    if (symndx == -1)
-	      name = "*ABS*";
-	    else if (h != NULL)
-	      name = NULL;
-	    else
-	      {
-		name = _bfd_coff_internal_syment_name (input_bfd, sym, buf);
-		if (name == NULL)
-		  return FALSE;
-	      }
-
-	    (*info->callbacks->reloc_overflow)
-	      (info, (h ? &h->root : NULL), name, howto->name,
-	       (bfd_vma) 0, input_bfd, input_section,
-	       rel->r_vaddr - input_section->vma);
-	  }
-	}
-    }
-
-  return TRUE;
-}
-
-/* Adjust the symbol index of any reloc against a global symbol to
-   instead be a reloc against the internal symbol we created specially
-   for the section.  */
-
-static bfd_boolean
-coff_i960_adjust_symndx (bfd *obfd ATTRIBUTE_UNUSED,
-			 struct bfd_link_info *info ATTRIBUTE_UNUSED,
-			 bfd *ibfd,
-			 asection *sec ATTRIBUTE_UNUSED,
-			 struct internal_reloc *irel,
-			 bfd_boolean *adjustedp)
-{
-  struct coff_link_hash_entry *h;
-
-  *adjustedp = FALSE;
-
-  h = obj_coff_sym_hashes (ibfd)[irel->r_symndx];
-  if (h == NULL
-      || (h->root.type != bfd_link_hash_defined
-	  && h->root.type != bfd_link_hash_defweak))
-    return TRUE;
-
-  irel->r_symndx = h->root.u.def.section->output_section->target_index - 1;
-  *adjustedp = TRUE;
-
-  return TRUE;
-}
-
-#define coff_bfd_is_local_label_name coff_i960_is_local_label_name
-
-#define coff_start_final_link coff_i960_start_final_link
-
-#define coff_relocate_section coff_i960_relocate_section
-
-#define coff_adjust_symndx coff_i960_adjust_symndx
-
-#define coff_bfd_reloc_type_lookup coff_i960_reloc_type_lookup
-#define coff_bfd_reloc_name_lookup coff_i960_reloc_name_lookup
-
-#include "coffcode.h"
-
-extern const bfd_target icoff_be_vec;
-
-CREATE_LITTLE_COFF_TARGET_VEC (icoff_le_vec, "coff-Intel-little", 0, 0, '_', & icoff_be_vec, COFF_SWAP_TABLE)
-
-const bfd_target icoff_be_vec =
-{
-  "coff-Intel-big",		/* name */
-  bfd_target_coff_flavour,
-  BFD_ENDIAN_LITTLE,		/* data byte order is little */
-  BFD_ENDIAN_BIG,		/* header byte order is big */
-
-  (HAS_RELOC | EXEC_P		/* object flags */
-   | HAS_LINENO | HAS_DEBUG
-   | HAS_SYMS | HAS_LOCALS | WP_TEXT),
-
-  (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC), /* section flags */
-  '_',				/* leading underscore */
-  '/',				/* ar_pad_char */
-  15,				/* ar_max_namelen */
-  0,				/* match priority.  */
-
-  bfd_getl64, bfd_getl_signed_64, bfd_putl64,
-     bfd_getl32, bfd_getl_signed_32, bfd_putl32,
-     bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* data */
-  bfd_getb64, bfd_getb_signed_64, bfd_putb64,
-     bfd_getb32, bfd_getb_signed_32, bfd_putb32,
-     bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* hdrs */
-
-  {				/* bfd_check_format */
-    _bfd_dummy_target,
-    coff_object_p,
-    bfd_generic_archive_p,
-    _bfd_dummy_target
-  },
-  {				/* bfd_set_format */
-    _bfd_bool_bfd_false_error,
-    coff_mkobject,
-    _bfd_generic_mkarchive,
-    _bfd_bool_bfd_false_error
-  },
-  {				/* bfd_write_contents */
-    _bfd_bool_bfd_false_error,
-    coff_write_object_contents,
-    _bfd_write_archive_contents,
-    _bfd_bool_bfd_false_error
-  },
-
-  BFD_JUMP_TABLE_GENERIC (coff),
-  BFD_JUMP_TABLE_COPY (coff),
-  BFD_JUMP_TABLE_CORE (_bfd_nocore),
-  BFD_JUMP_TABLE_ARCHIVE (_bfd_archive_coff),
-  BFD_JUMP_TABLE_SYMBOLS (coff),
-  BFD_JUMP_TABLE_RELOCS (coff),
-  BFD_JUMP_TABLE_WRITE (coff),
-  BFD_JUMP_TABLE_LINK (coff),
-  BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
-
-  &icoff_le_vec,
-
-  COFF_SWAP_TABLE
-};
diff --git a/bfd/coffcode.h b/bfd/coffcode.h
index caa8bcb..4a0741a1 100644
--- a/bfd/coffcode.h
+++ b/bfd/coffcode.h
@@ -40,11 +40,6 @@ SECTION
 	defines the relocations used by the 88k format
 	@xref{Relocations}.
 
-	The Intel i960 processor version of coff is implemented in
-	@file{coff-i960.c}. This file has the same structure as
-	@file{coff-m88k.c}, except that it includes @file{coff/i960.h}
-	rather than @file{coff-m88k.h}.
-
 SUBSECTION
 	Porting to a new version of coff
 
@@ -97,15 +92,6 @@ SUBSUBSECTION
 	Some of the Coff targets then also have additional routines in
 	the target source file itself.
 
-	For example, @file{coff-i960.c} includes
-	@file{coff/internal.h} and @file{coff/i960.h}.  It then
-	defines a few constants, such as @code{I960}, and includes
-	@file{coffcode.h}.  Since the i960 has complex relocation
-	types, @file{coff-i960.c} also includes some code to
-	manipulate the i960 relocs.  This code is not in
-	@file{coffcode.h} because it would not be used by any other
-	target.
-
 SUBSUBSECTION
 	Coff long section names
 
@@ -1664,19 +1650,6 @@ coff_bad_format_hook (bfd * abfd ATTRIBUTE_UNUSED, void * filehdr)
   if (BADMAG (*internal_f))
     return FALSE;
 
-  /* If the optional header is NULL or not the correct size then
-     quit; the only difference I can see between m88k dgux headers (MC88DMAGIC)
-     and Intel 960 readwrite headers (I960WRMAGIC) is that the
-     optional header is of a different size.
-
-     But the mips keeps extra stuff in it's opthdr, so dont check
-     when doing that.  */
-
-#if defined(M88) || defined(I960)
-  if (internal_f->f_opthdr != 0 && bfd_coff_aoutsz (abfd) != internal_f->f_opthdr)
-    return FALSE;
-#endif
-
   return TRUE;
 }
 
@@ -1848,12 +1821,6 @@ coff_set_alignment_hook (bfd * abfd ATTRIBUTE_UNUSED,
   struct internal_scnhdr *hdr = (struct internal_scnhdr *) scnhdr;
   unsigned int i;
 
-#ifdef I960
-  /* Extract ALIGN from 2**ALIGN stored in section header.  */
-  for (i = 0; i < 32; i++)
-    if ((1 << i) >= hdr->s_align)
-      break;
-#endif
 #ifdef COFF_DECODE_ALIGNMENT
   i = COFF_DECODE_ALIGNMENT(hdr->s_flags);
 #endif
@@ -2235,47 +2202,6 @@ coff_set_arch_mach_hook (bfd *abfd, void * filehdr)
 	}
       break;
 #endif
-#ifdef I860
-    case I860MAGIC:
-      arch = bfd_arch_i860;
-      break;
-#endif
-#ifdef I960
-#ifdef I960ROMAGIC
-    case I960ROMAGIC:
-    case I960RWMAGIC:
-      arch = bfd_arch_i960;
-      switch (F_I960TYPE & internal_f->f_flags)
-	{
-	default:
-	case F_I960CORE:
-	  machine = bfd_mach_i960_core;
-	  break;
-	case F_I960KB:
-	  machine = bfd_mach_i960_kb_sb;
-	  break;
-	case F_I960MC:
-	  machine = bfd_mach_i960_mc;
-	  break;
-	case F_I960XA:
-	  machine = bfd_mach_i960_xa;
-	  break;
-	case F_I960CA:
-	  machine = bfd_mach_i960_ca;
-	  break;
-	case F_I960KA:
-	  machine = bfd_mach_i960_ka_sa;
-	  break;
-	case F_I960JX:
-	  machine = bfd_mach_i960_jx;
-	  break;
-	case F_I960HX:
-	  machine = bfd_mach_i960_hx;
-	  break;
-	}
-      break;
-#endif
-#endif
 
 #ifdef RS6000COFF_C
 #ifdef XCOFF64
@@ -2552,31 +2478,7 @@ coff_pointerize_aux_hook (bfd *abfd ATTRIBUTE_UNUSED,
 }
 
 #else
-#ifdef I960
-
-/* We don't want to pointerize bal entries.  */
-
-static bfd_boolean
-coff_pointerize_aux_hook (bfd *abfd ATTRIBUTE_UNUSED,
-			  combined_entry_type *table_base ATTRIBUTE_UNUSED,
-			  combined_entry_type *symbol,
-			  unsigned int indaux,
-			  combined_entry_type *aux ATTRIBUTE_UNUSED)
-{
-  /* Return TRUE if we don't want to pointerize this aux entry, which
-     is the case for the lastfirst aux entry for a C_LEAFPROC symbol.  */
-  return (indaux == 1
-	  && symbol->is_sym
-	  && (symbol->u.syment.n_sclass == C_LEAFPROC
-	      || symbol->u.syment.n_sclass == C_LEAFSTAT
-	      || symbol->u.syment.n_sclass == C_LEAFEXT));
-}
-
-#else /* ! I960 */
-
 #define coff_pointerize_aux_hook 0
-
-#endif /* ! I960 */
 #endif /* ! RS6000COFF_C */
 
 /* Print an aux entry.  This returns TRUE if it has printed it.  */
@@ -2856,32 +2758,6 @@ coff_set_flags (bfd * abfd,
       return TRUE;
 #endif
 
-#ifdef I960ROMAGIC
-    case bfd_arch_i960:
-
-      {
-	unsigned flags;
-
-	*magicp = I960ROMAGIC;
-
-	switch (bfd_get_mach (abfd))
-	  {
-	  case bfd_mach_i960_core:  flags = F_I960CORE; break;
-	  case bfd_mach_i960_kb_sb: flags = F_I960KB;	break;
-	  case bfd_mach_i960_mc:    flags = F_I960MC;	break;
-	  case bfd_mach_i960_xa:    flags = F_I960XA;	break;
-	  case bfd_mach_i960_ca:    flags = F_I960CA;	break;
-	  case bfd_mach_i960_ka_sa: flags = F_I960KA;	break;
-	  case bfd_mach_i960_jx:    flags = F_I960JX;	break;
-	  case bfd_mach_i960_hx:    flags = F_I960HX;	break;
-	  default:		    return FALSE;
-	  }
-	*flagsp = flags;
-	return TRUE;
-      }
-      break;
-#endif
-
 #ifdef TIC30MAGIC
     case bfd_arch_tic30:
       *magicp = TIC30MAGIC;
@@ -2981,12 +2857,6 @@ coff_set_flags (bfd * abfd,
       return TRUE;
 #endif
 
-#ifdef I860MAGIC
-    case bfd_arch_i860:
-      *magicp = I860MAGIC;
-      return TRUE;
-#endif
-
 #ifdef IA64MAGIC
     case bfd_arch_ia64:
       *magicp = IA64MAGIC;
@@ -3146,9 +3016,7 @@ sort_by_secaddr (const void * arg1, const void * arg2)
 
 /* Calculate the file position for each section.  */
 
-#ifndef I960
 #define ALIGN_SECTIONS_IN_FILE
-#endif
 #if defined(TIC80COFF) || defined(TICOFF)
 #undef ALIGN_SECTIONS_IN_FILE
 #endif
@@ -3389,9 +3257,7 @@ coff_compute_section_file_positions (bfd * abfd)
 #endif
 
       /* Align the sections in the file to the same boundary on
-	 which they are aligned in virtual memory.  I960 doesn't
-	 do this (FIXME) so we can stay in sync with Intel.  960
-	 doesn't yet page from files...  */
+	 which they are aligned in virtual memory.  */
 #ifdef ALIGN_SECTIONS_IN_FILE
       if ((abfd->flags & EXEC_P) != 0)
 	{
@@ -3855,11 +3721,6 @@ coff_write_object_contents (bfd * abfd)
       else if (!strcmp (current->name, _BSS))
 	bss_sec = current;
 
-#ifdef I960
-      section.s_align = (current->alignment_power
-			 ? 1 << current->alignment_power
-			 : 0);
-#endif
 #ifdef COFF_ENCODE_ALIGNMENT
       COFF_ENCODE_ALIGNMENT(section, current->alignment_power);
       if ((unsigned int)COFF_DECODE_ALIGNMENT(section.s_flags)
@@ -4118,15 +3979,6 @@ coff_write_object_contents (bfd * abfd)
     internal_a.magic = TIC80_ARCH_MAGIC;
 #define __A_MAGIC_SET__
 #endif /* TIC80 */
-#ifdef I860
-    /* FIXME: What are the a.out magic numbers for the i860?  */
-    internal_a.magic = 0;
-#define __A_MAGIC_SET__
-#endif /* I860 */
-#ifdef I960
-    internal_a.magic = (magic == I960ROMAGIC ? NMAGIC : OMAGIC);
-#define __A_MAGIC_SET__
-#endif /* I960 */
 #if M88
 #define __A_MAGIC_SET__
     internal_a.magic = PAGEMAGICBCS;
@@ -4820,11 +4672,6 @@ coff_slurp_symbol_table (bfd * abfd)
 
 	  switch (src->u.syment.n_sclass)
 	    {
-#ifdef I960
-	    case C_LEAFEXT:
-	      /* Fall through to next case.  */
-#endif
-
 	    case C_EXT:
 	    case C_WEAKEXT:
 #if defined ARM
@@ -4918,9 +4765,6 @@ coff_slurp_symbol_table (bfd * abfd)
 	      break;
 
 	    case C_STAT:	 /* Static.  */
-#ifdef I960
-	    case C_LEAFSTAT:	 /* Static leaf procedure.  */
-#endif
 #if defined ARM
 	    case C_THUMBSTAT:    /* Thumb static.  */
 	    case C_THUMBLABEL:   /* Thumb label.  */
@@ -4958,11 +4802,6 @@ coff_slurp_symbol_table (bfd * abfd)
 	    case C_REGPARM:	/* Register parameter.  */
 	    case C_REG:		/* register variable.  */
 	      /* C_AUTOARG conflicts with TI COFF C_UEXT.  */
-#if !defined (TIC80COFF) && !defined (TICOFF)
-#ifdef C_AUTOARG
-	    case C_AUTOARG:	/* 960-specific storage class.  */
-#endif
-#endif
 	    case C_TPDEF:	/* Type definition.  */
 	    case C_ARG:
 	    case C_AUTO:	/* Automatic variable.  */
@@ -5158,9 +4997,6 @@ coff_classify_symbol (bfd *abfd,
     {
     case C_EXT:
     case C_WEAKEXT:
-#ifdef I960
-    case C_LEAFEXT:
-#endif
 #ifdef ARM
     case C_THUMBEXT:
     case C_THUMBEXTFUNC:
@@ -5262,7 +5098,7 @@ SUBSUBSECTION
 
 	o The reloc index is turned into a pointer to a howto
 	structure, in a back end specific way. For instance, the 386
-	and 960 use the @code{r_type} to directly produce an index
+	uses the @code{r_type} to directly produce an index
 	into a howto table vector; the 88k subtracts a number from the
 	@code{r_type} field and creates an addend field.
 */
diff --git a/bfd/coffswap.h b/bfd/coffswap.h
index 7b000e0..5fec8bf 100644
--- a/bfd/coffswap.h
+++ b/bfd/coffswap.h
@@ -618,10 +618,6 @@ coff_swap_aouthdr_in (bfd * abfd, void * aouthdr_ext1, void * aouthdr_int1)
   aouthdr_int->data_start =
     GET_AOUTHDR_DATA_START (abfd, aouthdr_ext->data_start);
 
-#ifdef I960
-  aouthdr_int->tagentries = H_GET_32 (abfd, aouthdr_ext->tagentries);
-#endif
-
 #ifdef APOLLO_M68
   H_PUT_32 (abfd, aouthdr_int->o_inlib, aouthdr_ext->o_inlib);
   H_PUT_32 (abfd, aouthdr_int->o_sri, aouthdr_ext->o_sri);
@@ -689,10 +685,6 @@ coff_swap_aouthdr_out (bfd * abfd, void * in, void * out)
   PUT_AOUTHDR_DATA_START (abfd, aouthdr_in->data_start,
 			  aouthdr_out->data_start);
 
-#ifdef I960
-  H_PUT_32 (abfd, aouthdr_in->tagentries, aouthdr_out->tagentries);
-#endif
-
 #ifdef RS6000COFF_C
 #ifdef XCOFF64
   H_PUT_64 (abfd, aouthdr_in->o_toc, aouthdr_out->o_toc);
@@ -767,9 +759,6 @@ coff_swap_scnhdr_in (bfd * abfd, void * ext, void * in)
   scnhdr_int->s_flags = GET_SCNHDR_FLAGS (abfd, scnhdr_ext->s_flags);
   scnhdr_int->s_nreloc = GET_SCNHDR_NRELOC (abfd, scnhdr_ext->s_nreloc);
   scnhdr_int->s_nlnno = GET_SCNHDR_NLNNO (abfd, scnhdr_ext->s_nlnno);
-#ifdef I960
-  scnhdr_int->s_align = GET_SCNHDR_ALIGN (abfd, scnhdr_ext->s_align);
-#endif
 #ifdef COFF_ADJUST_SCNHDR_IN_POST
   COFF_ADJUST_SCNHDR_IN_POST (abfd, ext, in);
 #endif
@@ -830,9 +819,6 @@ coff_swap_scnhdr_out (bfd * abfd, void * in, void * out)
     }
 #endif
 
-#ifdef I960
-  PUT_SCNHDR_ALIGN (abfd, scnhdr_int->s_align, scnhdr_ext->s_align);
-#endif
 #ifdef COFF_ADJUST_SCNHDR_OUT_POST
   COFF_ADJUST_SCNHDR_OUT_POST (abfd, in, out);
 #endif
diff --git a/bfd/config.bfd b/bfd/config.bfd
index f04a993..881c48c 100644
--- a/bfd/config.bfd
+++ b/bfd/config.bfd
@@ -81,8 +81,6 @@ case $targ in
  i[3-7]86-*-os9k | \
  i[3-7]86-none-* | \
  i[3-7]86-*-aout* | i[3-7]86*-*-vsta* | \
- i860-*-* | \
- i960-*-* | \
  m68*-motorola-sysv* | m68*-hp-bsd* | m68*-*-aout* | \
  m68*-*-coff* | m68*-*-sysv* | \
  m68*-*-hpux* | \
@@ -115,7 +113,6 @@ case $targ in
  we32k-*-* | \
  w65-*-* | \
  *-*-ieee* | \
- *-adobe-* | \
  *-sony-* | \
  *-tandem-* | \
  i370-* | \
@@ -131,13 +128,15 @@ case $targ in
 esac
 
 case $targ in
+ *-adobe-* | \
  *-go32-rtems* | \
  *-*-rtemsaout* | \
  *-*-rtemscoff* | \
  a29k-* | \
  arm-*-oabi | \
  hppa*-*-rtems* | \
- i960-*-rtems* | \
+ i860-*-* | \
+ i960-*-* | \
  m68*-*-lynxos* | \
  m68*-apollo-* | \
  m68*-apple-aux* | \
@@ -882,37 +881,6 @@ case "${targ}" in
     targ_selfvecs="iamcu_elf32_vec i386chaos_vec"
     ;;
 
-  i860-*-mach3* | i860-*-osf1* | i860-*-coff*)
-    targ_defvec=i860_coff_vec
-    ;;
-  i860-stardent-sysv4* | i860-stardent-elf*)
-    targ_defvec=i860_elf32_le_vec
-    targ_selvecs="i860_elf32_vec i860_elf32_le_vec"
-    ;;
-  i860-*-sysv4* | i860-*-elf*)
-    targ_defvec=i860_elf32_vec
-    ;;
-
-  i960-*-vxworks4* | i960-*-vxworks5.0)
-    targ_defvec=bout_le_vec
-    targ_selvecs="bout_be_vec icoff_le_vec icoff_be_vec ieee_vec"
-    targ_underscore=yes
-    ;;
-  i960-*-vxworks5.* | i960-*-coff* | i960-*-sysv*)
-    targ_defvec=icoff_le_vec
-    targ_selvecs="icoff_be_vec bout_le_vec bout_be_vec ieee_vec"
-    targ_underscore=yes
-    ;;
-  i960-*-vxworks* | i960-*-aout* | i960-*-bout* | i960-*-nindy*)
-    targ_defvec=bout_le_vec
-    targ_selvecs="bout_be_vec icoff_le_vec icoff_be_vec ieee_vec"
-    targ_underscore=yes
-    ;;
-  i960-*-elf*)
-    targ_defvec=i960_elf32_vec
-    targ_selvecs="icoff_le_vec icoff_be_vec"
-    ;;
-
   ia16-*-elf)
     targ_defvec=i386_elf32_vec
     targ_selvecs="i386_msdos_vec i386_aout_vec"
@@ -1854,11 +1822,6 @@ case "${targ}" in
     targ_defvec=ieee_vec
     ;;
 
-  *-adobe-*)
-    targ_defvec=aout_adobe_vec
-    targ_underscore=yes
-    ;;
-
   *-sony-*)
     targ_defvec=m68k_aout_newsos3_vec
     targ_underscore=yes
diff --git a/bfd/configure b/bfd/configure
index 667f001..f14c96c 100755
--- a/bfd/configure
+++ b/bfd/configure
@@ -14344,7 +14344,6 @@ do
     aout0_be_vec)		 tb="$tb aout0.lo aout32.lo" ;;
     aout64_vec)			 tb="$tb demo64.lo aout64.lo"; target_size=64 ;;
     aout_vec)			 tb="$tb host-aout.lo aout32.lo" ;;
-    aout_adobe_vec)		 tb="$tb aout-adobe.lo aout32.lo" ;;
     arc_elf32_be_vec)		 tb="$tb elf32-arc.lo elf32.lo $elf" ;;
     arc_elf32_le_vec)		 tb="$tb elf32-arc.lo elf32.lo $elf" ;;
     arm_aout_be_vec)		 tb="$tb aout-arm.lo aout32.lo" ;;
@@ -14377,8 +14376,6 @@ do
     avr_elf32_vec)		 tb="$tb elf32-avr.lo elf32.lo $elf" ;;
     bfin_elf32_vec)		 tb="$tb elf32-bfin.lo elf32.lo $elf" ;;
     bfin_elf32_fdpic_vec)	 tb="$tb elf32-bfin.lo elf32.lo $elf" ;;
-    bout_be_vec)		 tb="$tb bout.lo aout32.lo" ;;
-    bout_le_vec)		 tb="$tb bout.lo aout32.lo" ;;
     cr16_elf32_vec)		 tb="$tb elf32-cr16.lo elf32.lo $elf" ;;
     cr16c_elf32_vec)		 tb="$tb elf32-cr16c.lo elf32.lo $elf" ;;
     cris_aout_vec)		 tb="$tb aout-cris.lo" ;;
@@ -14431,10 +14428,6 @@ do
     i386_pe_vec)		 tb="$tb pe-i386.lo peigen.lo $coff" ;;
     i386_pei_vec)		 tb="$tb pei-i386.lo peigen.lo $coff" ;;
     iamcu_elf32_vec)		 tb="$tb elf32-i386.lo elfxx-x86.lo elf-ifunc.lo elf-nacl.lo elf-vxworks.lo elf32.lo $elf" ;;
-    i860_coff_vec)		 tb="$tb coff-i860.lo $coff" ;;
-    i860_elf32_vec)		 tb="$tb elf32-i860.lo elf32.lo $elf" ;;
-    i860_elf32_le_vec)		 tb="$tb elf32-i860.lo elf32.lo $elf" ;;
-    i960_elf32_vec)		 tb="$tb elf32-i960.lo elf32.lo $elf" ;;
     ia64_elf32_be_vec)		 tb="$tb elf32-ia64.lo elfxx-ia64.lo elf32.lo $elf" ;;
     ia64_elf32_hpux_be_vec)	 tb="$tb elf32-ia64.lo elfxx-ia64.lo elf32.lo $elf" ;;
     ia64_elf64_be_vec)		 tb="$tb elf64-ia64.lo elfxx-ia64.lo elf64.lo $elf"; target_size=64 ;;
@@ -14442,8 +14435,6 @@ do
     ia64_elf64_hpux_be_vec)	 tb="$tb elf64-ia64.lo elfxx-ia64.lo elf64.lo $elf"; target_size=64 ;;
     ia64_elf64_vms_vec)		 tb="$tb elf64-ia64-vms.lo elf64-ia64.lo elfxx-ia64.lo elf64.lo vms-lib.lo vms-misc.lo $elf"; target_size=64 ;;
     ia64_pei_vec)		 tb="$tb pei-ia64.lo pepigen.lo $coff"; target_size=64 ;;
-    icoff_be_vec)		 tb="$tb coff-i960.lo $coff" ;;
-    icoff_le_vec)		 tb="$tb coff-i960.lo $coff" ;;
     ieee_vec)			 tb="$tb ieee.lo" ;;
     ip2k_elf32_vec)		 tb="$tb elf32-ip2k.lo elf32.lo $elf" ;;
     iq2000_elf32_vec)		 tb="$tb elf32-iq2000.lo elf32.lo $elf" ;;
@@ -14890,10 +14881,6 @@ if test "${target}" = "${host}"; then
 	;;
   i[3-7]86-*-isc*)	COREFILE=trad-core.lo ;;
   i[3-7]86-*-aix*)	COREFILE=aix386-core.lo ;;
-  i860-*-mach3* | i860-*-osf1*)
-	COREFILE=trad-core.lo
-	TRAD_HEADER='"hosts/i860mach3.h"'
-	;;
   mips-*-netbsd* | mips*-*-openbsd*)
 	COREFILE=netbsd-core.lo
 	;;
diff --git a/bfd/configure.ac b/bfd/configure.ac
index 20e2c02..8eeb5ff 100644
--- a/bfd/configure.ac
+++ b/bfd/configure.ac
@@ -421,7 +421,6 @@ do
     aout0_be_vec)		 tb="$tb aout0.lo aout32.lo" ;;
     aout64_vec)			 tb="$tb demo64.lo aout64.lo"; target_size=64 ;;
     aout_vec)			 tb="$tb host-aout.lo aout32.lo" ;;
-    aout_adobe_vec)		 tb="$tb aout-adobe.lo aout32.lo" ;;
     arc_elf32_be_vec)		 tb="$tb elf32-arc.lo elf32.lo $elf" ;;
     arc_elf32_le_vec)		 tb="$tb elf32-arc.lo elf32.lo $elf" ;;
     arm_aout_be_vec)		 tb="$tb aout-arm.lo aout32.lo" ;;
@@ -454,8 +453,6 @@ do
     avr_elf32_vec)		 tb="$tb elf32-avr.lo elf32.lo $elf" ;;
     bfin_elf32_vec)		 tb="$tb elf32-bfin.lo elf32.lo $elf" ;;
     bfin_elf32_fdpic_vec)	 tb="$tb elf32-bfin.lo elf32.lo $elf" ;;
-    bout_be_vec)		 tb="$tb bout.lo aout32.lo" ;;
-    bout_le_vec)		 tb="$tb bout.lo aout32.lo" ;;
     cr16_elf32_vec)		 tb="$tb elf32-cr16.lo elf32.lo $elf" ;;
     cr16c_elf32_vec)		 tb="$tb elf32-cr16c.lo elf32.lo $elf" ;;
     cris_aout_vec)		 tb="$tb aout-cris.lo" ;;
@@ -508,10 +505,6 @@ do
     i386_pe_vec)		 tb="$tb pe-i386.lo peigen.lo $coff" ;;
     i386_pei_vec)		 tb="$tb pei-i386.lo peigen.lo $coff" ;;
     iamcu_elf32_vec)		 tb="$tb elf32-i386.lo elfxx-x86.lo elf-ifunc.lo elf-nacl.lo elf-vxworks.lo elf32.lo $elf" ;;
-    i860_coff_vec)		 tb="$tb coff-i860.lo $coff" ;;
-    i860_elf32_vec)		 tb="$tb elf32-i860.lo elf32.lo $elf" ;;
-    i860_elf32_le_vec)		 tb="$tb elf32-i860.lo elf32.lo $elf" ;;
-    i960_elf32_vec)		 tb="$tb elf32-i960.lo elf32.lo $elf" ;;
     ia64_elf32_be_vec)		 tb="$tb elf32-ia64.lo elfxx-ia64.lo elf32.lo $elf" ;;
     ia64_elf32_hpux_be_vec)	 tb="$tb elf32-ia64.lo elfxx-ia64.lo elf32.lo $elf" ;;
     ia64_elf64_be_vec)		 tb="$tb elf64-ia64.lo elfxx-ia64.lo elf64.lo $elf"; target_size=64 ;;
@@ -519,8 +512,6 @@ do
     ia64_elf64_hpux_be_vec)	 tb="$tb elf64-ia64.lo elfxx-ia64.lo elf64.lo $elf"; target_size=64 ;;
     ia64_elf64_vms_vec)		 tb="$tb elf64-ia64-vms.lo elf64-ia64.lo elfxx-ia64.lo elf64.lo vms-lib.lo vms-misc.lo $elf"; target_size=64 ;;
     ia64_pei_vec)		 tb="$tb pei-ia64.lo pepigen.lo $coff"; target_size=64 ;;
-    icoff_be_vec)		 tb="$tb coff-i960.lo $coff" ;;
-    icoff_le_vec)		 tb="$tb coff-i960.lo $coff" ;;
     ieee_vec)			 tb="$tb ieee.lo" ;;
     ip2k_elf32_vec)		 tb="$tb elf32-ip2k.lo elf32.lo $elf" ;;
     iq2000_elf32_vec)		 tb="$tb elf32-iq2000.lo elf32.lo $elf" ;;
@@ -976,10 +967,6 @@ changequote(,)dnl
   i[3-7]86-*-isc*)	COREFILE=trad-core.lo ;;
   i[3-7]86-*-aix*)	COREFILE=aix386-core.lo ;;
 changequote([,])dnl
-  i860-*-mach3* | i860-*-osf1*)
-	COREFILE=trad-core.lo
-	TRAD_HEADER='"hosts/i860mach3.h"'
-	;;
   mips-*-netbsd* | mips*-*-openbsd*)
 	COREFILE=netbsd-core.lo
 	;;
diff --git a/bfd/cpu-i860.c b/bfd/cpu-i860.c
deleted file mode 100644
index 7f6eb4b..0000000
--- a/bfd/cpu-i860.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/* BFD support for the Intel 860 architecture.
-   Copyright (C) 1992-2018 Free Software Foundation, Inc.
-   Created mostly by substituting "860" for "386" in cpu-i386.c
-   Harry Dolan <dolan@ssd.intel.com>, October 1995
-
-   This file is part of BFD, the Binary File Descriptor library.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 3 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
-   MA 02110-1301, USA.  */
-
-#include "sysdep.h"
-#include "bfd.h"
-#include "libbfd.h"
-
-const bfd_arch_info_type bfd_i860_arch =
-  {
-    32,				/* 32 bits in a word */
-    32,				/* 32 bits in an address */
-    8,				/* 8 bits in a byte */
-    bfd_arch_i860,		/* Architecture */
-    0,				/* Only one machine */
-    "i860",			/* Architecture name */
-    "i860",			/* Printable name */
-    3,				/* Section alignment exponent */
-    TRUE,			/* Is this the default architecture? */
-    bfd_default_compatible,
-    bfd_default_scan,
-    bfd_arch_default_fill,
-    0,				/* Next in list */
-  };
diff --git a/bfd/cpu-i960.c b/bfd/cpu-i960.c
deleted file mode 100644
index f1333db..0000000
--- a/bfd/cpu-i960.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/* BFD library support routines for the i960 architecture.
-   Copyright (C) 1990-2018 Free Software Foundation, Inc.
-   Hacked by Steve Chamberlain of Cygnus Support.
-
-   This file is part of BFD, the Binary File Descriptor library.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 3 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
-   MA 02110-1301, USA.  */
-
-#include "sysdep.h"
-#include "bfd.h"
-#include "libbfd.h"
-
-/* This routine is provided a string, and tries to work out if it
-   could possibly refer to the i960 machine pointed at in the
-   info_struct pointer */
-
-static bfd_boolean
-scan_960_mach (const bfd_arch_info_type *ap,
-	       const char *string)
-{
-  unsigned long machine;
-  int fail_because_not_80960 = FALSE;
-
-  /* Look for the string i960 at the front of the string.  */
-  if (strncasecmp ("i960", string, 4) == 0)
-    {
-      string += 4;
-
-      /* i960 on it's own means core to us.  */
-      if (* string == 0)
-	return ap->mach == bfd_mach_i960_core;
-
-      /* "i960:*" is valid, anything else is not.  */
-      if (* string != ':')
-	return FALSE;
-
-      string ++;
-    }
-  /* In some bfds the cpu-id is written as "80960KA", "80960KB",
-     "80960CA" or "80960MC".  */
-  else if (CONST_STRNEQ (string, "80960"))
-    {
-      string += 5;
-
-      /* Set this to TRUE here.  If a correct matching postfix
-	 is detected below it will be reset to FALSE.  */
-      fail_because_not_80960 = TRUE;
-    }
-  /* No match, can't be us.  */
-  else
-    return FALSE;
-
-  if (* string == '\0')
-    return FALSE;
-
-  if (string[0] == 'c' && string[1] == 'o' && string[2] == 'r' &&
-      string[3] == 'e' && string[4] == '\0')
-    machine = bfd_mach_i960_core;
-  else if (strcasecmp (string, "ka_sa") == 0)
-    machine = bfd_mach_i960_ka_sa;
-  else if (strcasecmp (string, "kb_sb") == 0)
-    machine = bfd_mach_i960_kb_sb;
-  else if (string[1] == '\0' || string[2] != '\0') /* rest are 2-char.  */
-    return FALSE;
-  else if (string[0] == 'k' && string[1] == 'b')
-    { machine = bfd_mach_i960_kb_sb; fail_because_not_80960 = FALSE; }
-  else if (string[0] == 's' && string[1] == 'b')
-    machine = bfd_mach_i960_kb_sb;
-  else if (string[0] == 'm' && string[1] == 'c')
-    { machine = bfd_mach_i960_mc; fail_because_not_80960 = FALSE; }
-  else if (string[0] == 'x' && string[1] == 'a')
-    machine = bfd_mach_i960_xa;
-  else if (string[0] == 'c' && string[1] == 'a')
-    { machine = bfd_mach_i960_ca; fail_because_not_80960 = FALSE; }
-  else if (string[0] == 'k' && string[1] == 'a')
-    { machine = bfd_mach_i960_ka_sa; fail_because_not_80960 = FALSE; }
-  else if (string[0] == 's' && string[1] == 'a')
-    machine = bfd_mach_i960_ka_sa;
-  else if (string[0] == 'j' && string[1] == 'x')
-    machine = bfd_mach_i960_jx;
-  else if (string[0] == 'h' && string[1] == 'x')
-    machine = bfd_mach_i960_hx;
-  else
-    return FALSE;
-
-  if (fail_because_not_80960)
-    return FALSE;
-
-  if (machine == ap->mach)
-    return TRUE;
-
-  return FALSE;
-}
-
-/* This routine is provided two arch_infos and works out the i960
-   machine which would be compatible with both and returns a pointer
-   to its info structure */
-
-static const bfd_arch_info_type *
-compatible (const bfd_arch_info_type *a,
-	    const bfd_arch_info_type *b)
-{
-
-  /* The i960 has distinct subspecies which may not interbreed:
-	CORE CA
-	CORE KA KB MC XA
-	CORE HX JX
-     Any architecture on the same line is compatible, the one on
-     the right is the least restrictive.
-
-     We represent this information in an array, each machine to a side */
-
-#define ERROR	0
-#define CORE	bfd_mach_i960_core  /*1*/
-#define KA	bfd_mach_i960_ka_sa /*2*/
-#define KB	bfd_mach_i960_kb_sb /*3*/
-#define MC	bfd_mach_i960_mc    /*4*/
-#define XA	bfd_mach_i960_xa    /*5*/
-#define CA	bfd_mach_i960_ca    /*6*/
-#define JX	bfd_mach_i960_jx    /*7*/
-#define HX	bfd_mach_i960_hx    /*8*/
-#define MAX_ARCH ((int)HX)
-
-  static const unsigned long matrix[MAX_ARCH+1][MAX_ARCH+1] =
-    {
-      { ERROR,	CORE,	KA,	KB,	MC,	XA,	CA,	JX,	HX },
-      { CORE,	CORE,	KA,	KB,	MC,	XA,	CA,	JX,	HX },
-      { KA,	KA,	KA,	KB,	MC,	XA,	ERROR,	ERROR,	ERROR},
-      { KB,	KB,	KB,	KB,	MC,	XA,	ERROR,	ERROR,	ERROR},
-      { MC,	MC,	MC,	MC,	MC,	XA,	ERROR,	ERROR,	ERROR},
-      { XA,	XA,	XA,	XA,	XA,	XA,	ERROR,	ERROR,	ERROR},
-      { CA,	CA,	ERROR,	ERROR,	ERROR,	ERROR,	CA,	ERROR,	ERROR},
-      { JX,	JX,	ERROR,	ERROR,	ERROR,	ERROR,	ERROR,  JX,	HX },
-      { HX,	HX,	ERROR,	ERROR,	ERROR,	ERROR,	ERROR,	HX,	HX },
-    };
-
-  if (a->arch != b->arch || matrix[a->mach][b->mach] == ERROR)
-    return NULL;
-
-  return (a->mach  ==  matrix[a->mach][b->mach]) ?  a : b;
-}
-
-#define N(a,b,d,n) \
-{ 32, 32, 8,bfd_arch_i960,a,"i960",b,3,d,compatible,scan_960_mach, \
-  bfd_arch_default_fill, n,}
-
-static const bfd_arch_info_type arch_info_struct[] =
-{
-  N(bfd_mach_i960_ka_sa,"i960:ka_sa",FALSE, &arch_info_struct[1]),
-  N(bfd_mach_i960_kb_sb,"i960:kb_sb",FALSE, &arch_info_struct[2]),
-  N(bfd_mach_i960_mc,   "i960:mc",   FALSE, &arch_info_struct[3]),
-  N(bfd_mach_i960_xa,   "i960:xa",   FALSE, &arch_info_struct[4]),
-  N(bfd_mach_i960_ca,   "i960:ca",   FALSE, &arch_info_struct[5]),
-  N(bfd_mach_i960_jx,   "i960:jx",   FALSE, &arch_info_struct[6]),
-  N(bfd_mach_i960_hx,	"i960:hx",   FALSE, 0),
-};
-
-const bfd_arch_info_type bfd_i960_arch =
-  N(bfd_mach_i960_core, "i960:core", TRUE, &arch_info_struct[0]);
diff --git a/bfd/elf32-i860.c b/bfd/elf32-i860.c
deleted file mode 100644
index d588dc5..0000000
--- a/bfd/elf32-i860.c
+++ /dev/null
@@ -1,1274 +0,0 @@
-/* Intel i860 specific support for 32-bit ELF.
-   Copyright (C) 1993-2018 Free Software Foundation, Inc.
-
-   Full i860 support contributed by Jason Eckhardt <jle@cygnus.com>.
-
-   This file is part of BFD, the Binary File Descriptor library.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 3 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
-   MA 02110-1301, USA.  */
-
-#include "sysdep.h"
-#include "bfd.h"
-#include "libbfd.h"
-#include "elf-bfd.h"
-#include "elf/i860.h"
-
-/* special_function for R_860_PC26 relocation.  */
-static bfd_reloc_status_type
-i860_howto_pc26_reloc (bfd *abfd ATTRIBUTE_UNUSED,
-		       arelent *reloc_entry,
-		       asymbol *symbol,
-		       void *data ATTRIBUTE_UNUSED,
-		       asection *input_section,
-		       bfd *output_bfd,
-		       char **error_message ATTRIBUTE_UNUSED)
-{
-  bfd_vma insn;
-  bfd_vma relocation;
-  bfd_byte *addr;
-
-  if (output_bfd != NULL
-      && (symbol->flags & BSF_SECTION_SYM) == 0
-      && (! reloc_entry->howto->partial_inplace
-	  || reloc_entry->addend == 0))
-    {
-      reloc_entry->address += input_section->output_offset;
-      return bfd_reloc_ok;
-    }
-
-  /* Used elf32-mips.c as an example.  */
-  if (bfd_is_und_section (symbol->section)
-      && output_bfd == (bfd *) NULL)
-    return bfd_reloc_undefined;
-
-  if (bfd_is_com_section (symbol->section))
-    relocation = 0;
-  else
-    relocation = symbol->value;
-
-  relocation += symbol->section->output_section->vma;
-  relocation += symbol->section->output_offset;
-  relocation += reloc_entry->addend;
-
-  if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
-    return bfd_reloc_outofrange;
-
-  /* Adjust for PC-relative relocation.  */
-  relocation -= (input_section->output_section->vma
-		 + input_section->output_offset
-		 + reloc_entry->address
-		 + 4);
-
-  /* Check for target out of range.  */
-  if ((bfd_signed_vma)relocation > (0x3ffffff << 2)
-      || (bfd_signed_vma)relocation < (-0x4000000 * 4))
-    return bfd_reloc_outofrange;
-
-  addr = (bfd_byte *) data + reloc_entry->address;
-  insn = bfd_get_32 (abfd, addr);
-
-  relocation >>= reloc_entry->howto->rightshift;
-  insn = (insn & ~reloc_entry->howto->dst_mask)
-	 | (relocation & reloc_entry->howto->dst_mask);
-
-  bfd_put_32 (abfd, (bfd_vma) insn, addr);
-
-  return bfd_reloc_ok;
-}
-
-/* special_function for R_860_PC16 relocation.  */
-static bfd_reloc_status_type
-i860_howto_pc16_reloc (bfd *abfd,
-		       arelent *reloc_entry,
-		       asymbol *symbol,
-		       void *data,
-		       asection *input_section,
-		       bfd *output_bfd,
-		       char **error_message ATTRIBUTE_UNUSED)
-{
-  bfd_vma insn;
-  bfd_vma relocation;
-  bfd_byte *addr;
-
-  if (output_bfd != NULL
-      && (symbol->flags & BSF_SECTION_SYM) == 0
-      && (! reloc_entry->howto->partial_inplace
-	  || reloc_entry->addend == 0))
-    {
-      reloc_entry->address += input_section->output_offset;
-      return bfd_reloc_ok;
-    }
-
-  /* Used elf32-mips.c as an example.  */
-  if (bfd_is_und_section (symbol->section)
-      && output_bfd == (bfd *) NULL)
-    return bfd_reloc_undefined;
-
-  if (bfd_is_com_section (symbol->section))
-    relocation = 0;
-  else
-    relocation = symbol->value;
-
-  relocation += symbol->section->output_section->vma;
-  relocation += symbol->section->output_offset;
-  relocation += reloc_entry->addend;
-
-  if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
-    return bfd_reloc_outofrange;
-
-  /* Adjust for PC-relative relocation.  */
-  relocation -= (input_section->output_section->vma
-		 + input_section->output_offset
-		 + reloc_entry->address
-		 + 4);
-
-  /* Check for target out of range.  */
-  if ((bfd_signed_vma)relocation > (0x7fff << 2)
-      || (bfd_signed_vma)relocation < (-0x8000 * 4))
-    return bfd_reloc_outofrange;
-
-  addr = (bfd_byte *) data + reloc_entry->address;
-  insn = bfd_get_32 (abfd, addr);
-
-  relocation >>= reloc_entry->howto->rightshift;
-  relocation = (((relocation & 0xf800) << 5) | (relocation & 0x7ff))
-	       & reloc_entry->howto->dst_mask;
-  insn = (insn & ~reloc_entry->howto->dst_mask) | relocation;
-
-  bfd_put_32 (abfd, (bfd_vma) insn, addr);
-
-  return bfd_reloc_ok;
-}
-
-/* special_function for R_860_HIGHADJ relocation.  */
-static bfd_reloc_status_type
-i860_howto_highadj_reloc (bfd *abfd,
-			  arelent *reloc_entry,
-			  asymbol *symbol,
-			  void *data,
-			  asection *input_section,
-			  bfd *output_bfd,
-			  char **error_message ATTRIBUTE_UNUSED)
-{
-  bfd_vma insn;
-  bfd_vma relocation;
-  bfd_byte *addr;
-
-  if (output_bfd != NULL
-      && (symbol->flags & BSF_SECTION_SYM) == 0
-      && (! reloc_entry->howto->partial_inplace
-	  || reloc_entry->addend == 0))
-    {
-      reloc_entry->address += input_section->output_offset;
-      return bfd_reloc_ok;
-    }
-
-  /* Used elf32-mips.c as an example.  */
-  if (bfd_is_und_section (symbol->section)
-      && output_bfd == (bfd *) NULL)
-    return bfd_reloc_undefined;
-
-  if (bfd_is_com_section (symbol->section))
-    relocation = 0;
-  else
-    relocation = symbol->value;
-
-  relocation += symbol->section->output_section->vma;
-  relocation += symbol->section->output_offset;
-  relocation += reloc_entry->addend;
-  relocation += 0x8000;
-
-  if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
-    return bfd_reloc_outofrange;
-
-  addr = (bfd_byte *) data + reloc_entry->address;
-  insn = bfd_get_32 (abfd, addr);
-
-  relocation = ((relocation >> 16) & 0xffff);
-
-  insn = (insn & 0xffff0000) | relocation;
-
-  bfd_put_32 (abfd, (bfd_vma) insn, addr);
-
-  return bfd_reloc_ok;
-}
-
-/* special_function for R_860_SPLITn relocations.  */
-static bfd_reloc_status_type
-i860_howto_splitn_reloc (bfd *abfd,
-			 arelent *reloc_entry,
-			 asymbol *symbol,
-			 void *data,
-			 asection *input_section,
-			 bfd *output_bfd,
-			 char **error_message ATTRIBUTE_UNUSED)
-{
-  bfd_vma insn;
-  bfd_vma relocation;
-  bfd_byte *addr;
-
-  if (output_bfd != NULL
-      && (symbol->flags & BSF_SECTION_SYM) == 0
-      && (! reloc_entry->howto->partial_inplace
-	  || reloc_entry->addend == 0))
-    {
-      reloc_entry->address += input_section->output_offset;
-      return bfd_reloc_ok;
-    }
-
-  /* Used elf32-mips.c as an example.  */
-  if (bfd_is_und_section (symbol->section)
-      && output_bfd == (bfd *) NULL)
-    return bfd_reloc_undefined;
-
-  if (bfd_is_com_section (symbol->section))
-    relocation = 0;
-  else
-    relocation = symbol->value;
-
-  relocation += symbol->section->output_section->vma;
-  relocation += symbol->section->output_offset;
-  relocation += reloc_entry->addend;
-
-  if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
-    return bfd_reloc_outofrange;
-
-  addr = (bfd_byte *) data + reloc_entry->address;
-  insn = bfd_get_32 (abfd, addr);
-
-  relocation = (((relocation & 0xf800) << 5) | (relocation & 0x7ff))
-	       & reloc_entry->howto->dst_mask;
-  insn = (insn & ~reloc_entry->howto->dst_mask) | relocation;
-
-  bfd_put_32 (abfd, (bfd_vma) insn, addr);
-
-  return bfd_reloc_ok;
-}
-
-/* This howto table is preliminary.  */
-static reloc_howto_type elf32_i860_howto_table [] =
-{
-  /* This relocation does nothing.  */
-  HOWTO (R_860_NONE,		/* type */
-	 0,			/* rightshift */
-	 3,			/* size (0 = byte, 1 = short, 2 = long) */
-	 0,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-	 bfd_elf_generic_reloc,	/* special_function */
-	 "R_860_NONE",		/* name */
-	 FALSE,			/* partial_inplace */
-	 0,			/* src_mask */
-	 0,			/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-
-  /* A 32-bit absolute relocation.  */
-  HOWTO (R_860_32,		/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 32,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_bitfield, /* complain_on_overflow */
-	 bfd_elf_generic_reloc,	/* special_function */
-	 "R_860_32",		/* name */
-	 FALSE,			/* partial_inplace */
-	 0xffffffff,		/* src_mask */
-	 0xffffffff,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-
-  HOWTO (R_860_COPY,		/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 32,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_bitfield, /* complain_on_overflow */
-	 bfd_elf_generic_reloc,	/* special_function */
-	 "R_860_COPY",		/* name */
-	 TRUE,			/* partial_inplace */
-	 0xffffffff,		/* src_mask */
-	 0xffffffff,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-
-  HOWTO (R_860_GLOB_DAT,	/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 32,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_bitfield, /* complain_on_overflow */
-	 bfd_elf_generic_reloc,	/* special_function */
-	 "R_860_GLOB_DAT",	/* name */
-	 TRUE,			/* partial_inplace */
-	 0xffffffff,		/* src_mask */
-	 0xffffffff,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-
-  HOWTO (R_860_JUMP_SLOT,	/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 32,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_bitfield, /* complain_on_overflow */
-	 bfd_elf_generic_reloc,	/* special_function */
-	 "R_860_JUMP_SLOT",	/* name */
-	 TRUE,			/* partial_inplace */
-	 0xffffffff,		/* src_mask */
-	 0xffffffff,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-
-  HOWTO (R_860_RELATIVE,	/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 32,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_bitfield, /* complain_on_overflow */
-	 bfd_elf_generic_reloc,	/* special_function */
-	 "R_860_RELATIVE",	/* name */
-	 TRUE,			/* partial_inplace */
-	 0xffffffff,		/* src_mask */
-	 0xffffffff,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-
-  /* A 26-bit PC-relative relocation.  */
-  HOWTO (R_860_PC26,		/* type */
-	 2,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 26,			/* bitsize */
-	 TRUE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_bitfield, /* complain_on_overflow */
-	 i860_howto_pc26_reloc,	/* special_function */
-	 "R_860_PC26",		/* name */
-	 FALSE,			/* partial_inplace */
-	 0x3ffffff,		/* src_mask */
-	 0x3ffffff,		/* dst_mask */
-	 TRUE),			/* pcrel_offset */
-
-  HOWTO (R_860_PLT26,		/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 26,			/* bitsize */
-	 TRUE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_bitfield, /* complain_on_overflow */
-	 bfd_elf_generic_reloc,	/* special_function */
-	 "R_860_PLT26",		/* name */
-	 TRUE,			/* partial_inplace */
-	 0xffffffff,		/* src_mask */
-	 0xffffffff,		/* dst_mask */
-	 TRUE),			/* pcrel_offset */
-
-  /* A 16-bit PC-relative relocation.  */
-  HOWTO (R_860_PC16,		/* type */
-	 2,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 16,			/* bitsize */
-	 TRUE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_bitfield, /* complain_on_overflow */
-	 i860_howto_pc16_reloc,	/* special_function */
-	 "R_860_PC16",		/* name */
-	 FALSE,			/* partial_inplace */
-	 0x1f07ff,		/* src_mask */
-	 0x1f07ff,		/* dst_mask */
-	 TRUE),			/* pcrel_offset */
-
-  HOWTO (R_860_LOW0,		/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 16,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-	 bfd_elf_generic_reloc,	/* special_function */
-	 "R_860_LOW0",		/* name */
-	 FALSE,			/* partial_inplace */
-	 0xffff,		/* src_mask */
-	 0xffff,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-
-  HOWTO (R_860_SPLIT0,		/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 16,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-	 i860_howto_splitn_reloc, /* special_function */
-	 "R_860_SPLIT0",	/* name */
-	 FALSE,			/* partial_inplace */
-	 0x1f07ff,		/* src_mask */
-	 0x1f07ff,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-
-  HOWTO (R_860_LOW1,		/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 16,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-	 bfd_elf_generic_reloc,	/* special_function */
-	 "R_860_LOW1",		/* name */
-	 FALSE,			/* partial_inplace */
-	 0xfffe,		/* src_mask */
-	 0xfffe,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-
-  HOWTO (R_860_SPLIT1,		/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 16,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-	 i860_howto_splitn_reloc, /* special_function */
-	 "R_860_SPLIT1",	/* name */
-	 FALSE,			/* partial_inplace */
-	 0x1f07fe,		/* src_mask */
-	 0x1f07fe,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-
-  HOWTO (R_860_LOW2,		/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 16,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-	 bfd_elf_generic_reloc,	/* special_function */
-	 "R_860_LOW2",		/* name */
-	 FALSE,			/* partial_inplace */
-	 0xfffc,		/* src_mask */
-	 0xfffc,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-
-  HOWTO (R_860_SPLIT2,		/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 16,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-	 i860_howto_splitn_reloc, /* special_function */
-	 "R_860_SPLIT2",	/* name */
-	 FALSE,			/* partial_inplace */
-	 0x1f07fc,		/* src_mask */
-	 0x1f07fc,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-
-  HOWTO (R_860_LOW3,		/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 16,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-	 bfd_elf_generic_reloc,	/* special_function */
-	 "R_860_LOW3",		/* name */
-	 FALSE,			/* partial_inplace */
-	 0xfff8,		/* src_mask */
-	 0xfff8,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-
-  HOWTO (R_860_LOGOT0,		/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 16,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-	 bfd_elf_generic_reloc,	/* special_function */
-	 "R_860_LOGOT0",	/* name */
-	 FALSE,			/* partial_inplace */
-	 0,			/* src_mask */
-	 0xffff,		/* dst_mask */
-	 TRUE),			/* pcrel_offset */
-
-  HOWTO (R_860_SPGOT0,		/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 16,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-	 bfd_elf_generic_reloc,	/* special_function */
-	 "R_860_SPGOT0",	/* name */
-	 FALSE,			/* partial_inplace */
-	 0,			/* src_mask */
-	 0xffff,		/* dst_mask */
-	 TRUE),			/* pcrel_offset */
-
-  HOWTO (R_860_LOGOT1,		/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 16,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-	 bfd_elf_generic_reloc,	/* special_function */
-	 "R_860_LOGOT1",	/* name */
-	 FALSE,			/* partial_inplace */
-	 0,			/* src_mask */
-	 0xffff,		/* dst_mask */
-	 TRUE),			/* pcrel_offset */
-
-  HOWTO (R_860_SPGOT1,		/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 16,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-	 bfd_elf_generic_reloc,	/* special_function */
-	 "R_860_SPGOT1",	/* name */
-	 FALSE,			/* partial_inplace */
-	 0,			/* src_mask */
-	 0xffff,		/* dst_mask */
-	 TRUE),			/* pcrel_offset */
-
-  HOWTO (R_860_LOGOTOFF0,	 /* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 32,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-	 bfd_elf_generic_reloc,	/* special_function */
-	 "R_860_LOGOTOFF0",	/* name */
-	 TRUE,			/* partial_inplace */
-	 0xffffffff,		/* src_mask */
-	 0xffffffff,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-
-  HOWTO (R_860_SPGOTOFF0,	 /* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 32,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-	 bfd_elf_generic_reloc,	/* special_function */
-	 "R_860_SPGOTOFF0",	/* name */
-	 TRUE,			/* partial_inplace */
-	 0xffffffff,		/* src_mask */
-	 0xffffffff,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-
-  HOWTO (R_860_LOGOTOFF1,	 /* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 32,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-	 bfd_elf_generic_reloc,	/* special_function */
-	 "R_860_LOGOTOFF1",	/* name */
-	 TRUE,			/* partial_inplace */
-	 0xffffffff,		/* src_mask */
-	 0xffffffff,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-
-  HOWTO (R_860_SPGOTOFF1,       /* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 32,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-	 bfd_elf_generic_reloc,	/* special_function */
-	 "R_860_SPGOTOFF1",	/* name */
-	 TRUE,			/* partial_inplace */
-	 0xffffffff,		/* src_mask */
-	 0xffffffff,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-
-  HOWTO (R_860_LOGOTOFF2,	 /* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 32,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-	 bfd_elf_generic_reloc,	/* special_function */
-	 "R_860_LOGOTOFF2",	/* name */
-	 TRUE,			/* partial_inplace */
-	 0xffffffff,		/* src_mask */
-	 0xffffffff,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-
-  HOWTO (R_860_LOGOTOFF3,	 /* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 32,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-	 bfd_elf_generic_reloc,	/* special_function */
-	 "R_860_LOGOTOFF3",	/* name */
-	 TRUE,			/* partial_inplace */
-	 0xffffffff,		/* src_mask */
-	 0xffffffff,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-
-  HOWTO (R_860_LOPC,		/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 16,			/* bitsize */
-	 TRUE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_bitfield, /* complain_on_overflow */
-	 bfd_elf_generic_reloc,	/* special_function */
-	 "R_860_LOPC",		/* name */
-	 FALSE,			/* partial_inplace */
-	 0xffff,		/* src_mask */
-	 0xffff,		/* dst_mask */
-	 TRUE),			/* pcrel_offset */
-
-  HOWTO (R_860_HIGHADJ,		/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 16,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-	 i860_howto_highadj_reloc, /* special_function */
-	 "R_860_HIGHADJ",	/* name */
-	 FALSE,			/* partial_inplace */
-	 0xffff,		/* src_mask */
-	 0xffff,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-
-  HOWTO (R_860_HAGOT,		/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 16,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-	 bfd_elf_generic_reloc,	/* special_function */
-	 "R_860_HAGOT",		/* name */
-	 FALSE,			/* partial_inplace */
-	 0,			/* src_mask */
-	 0xffff,		/* dst_mask */
-	 TRUE),			/* pcrel_offset */
-
-  HOWTO (R_860_HAGOTOFF,	/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 32,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-	 bfd_elf_generic_reloc,	/* special_function */
-	 "R_860_HAGOTOFF",	/* name */
-	 TRUE,			/* partial_inplace */
-	 0xffffffff,		/* src_mask */
-	 0xffffffff,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-
-  HOWTO (R_860_HAPC,		/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 16,			/* bitsize */
-	 TRUE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_bitfield, /* complain_on_overflow */
-	 bfd_elf_generic_reloc,	/* special_function */
-	 "R_860_HAPC",		/* name */
-	 FALSE,			/* partial_inplace */
-	 0xffff,		/* src_mask */
-	 0xffff,		/* dst_mask */
-	 TRUE),			/* pcrel_offset */
-
-  HOWTO (R_860_HIGH,		/* type */
-	 16,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 16,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-	 bfd_elf_generic_reloc,	/* special_function */
-	 "R_860_HIGH",		/* name */
-	 FALSE,			/* partial_inplace */
-	 0xffff,		/* src_mask */
-	 0xffff,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-
-  HOWTO (R_860_HIGOT,		/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 16,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-	 bfd_elf_generic_reloc,	/* special_function */
-	 "R_860_HIGOT",		/* name */
-	 FALSE,			/* partial_inplace */
-	 0,			/* src_mask */
-	 0xffff,		/* dst_mask */
-	 TRUE),			/* pcrel_offset */
-
-  HOWTO (R_860_HIGOTOFF,	/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 32,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-	 bfd_elf_generic_reloc,	/* special_function */
-	 "R_860_HIGOTOFF",	/* name */
-	 TRUE,			/* partial_inplace */
-	 0xffffffff,		/* src_mask */
-	 0xffffffff,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-};
-
-static unsigned char elf_code_to_howto_index[R_860_max + 1];
-
-static reloc_howto_type *
-lookup_howto (bfd *abfd, unsigned int rtype)
-{
-  static int initialized = 0;
-  int i;
-  int howto_tbl_size = (int) (sizeof (elf32_i860_howto_table)
-			/ sizeof (elf32_i860_howto_table[0]));
-  reloc_howto_type *howto = NULL;
-
-  if (! initialized)
-    {
-      initialized = 1;
-      memset (elf_code_to_howto_index, 0xff,
-	      sizeof (elf_code_to_howto_index));
-      for (i = 0; i < howto_tbl_size; i++)
-	elf_code_to_howto_index[elf32_i860_howto_table[i].type] = i;
-    }
-
-  if (rtype < R_860_max)
-    {
-      i = elf_code_to_howto_index[rtype];
-      if (i < howto_tbl_size)
-	howto = elf32_i860_howto_table + i;
-    }
-  if (howto == NULL)
-    {
-      _bfd_error_handler (_("%pB: unsupported relocation type %#x"),
-			  abfd, rtype);
-      bfd_set_error (bfd_error_bad_value);
-    }
-  return howto;
-}
-
-/* Given a BFD reloc, return the matching HOWTO structure.  */
-static reloc_howto_type *
-elf32_i860_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
-{
-  unsigned int rtype;
-
-  switch (code)
-    {
-    case BFD_RELOC_NONE:
-      rtype = R_860_NONE;
-      break;
-    case BFD_RELOC_32:
-      rtype = R_860_32;
-      break;
-    case BFD_RELOC_860_COPY:
-      rtype = R_860_COPY;
-      break;
-    case BFD_RELOC_860_GLOB_DAT:
-      rtype = R_860_GLOB_DAT;
-      break;
-    case BFD_RELOC_860_JUMP_SLOT:
-      rtype = R_860_JUMP_SLOT;
-      break;
-    case BFD_RELOC_860_RELATIVE:
-      rtype = R_860_RELATIVE;
-      break;
-    case BFD_RELOC_860_PC26:
-      rtype = R_860_PC26;
-      break;
-    case BFD_RELOC_860_PLT26:
-      rtype = R_860_PLT26;
-      break;
-    case BFD_RELOC_860_PC16:
-      rtype = R_860_PC16;
-      break;
-    case BFD_RELOC_860_LOW0:
-      rtype = R_860_LOW0;
-      break;
-    case BFD_RELOC_860_SPLIT0:
-      rtype = R_860_SPLIT0;
-      break;
-    case BFD_RELOC_860_LOW1:
-      rtype = R_860_LOW1;
-      break;
-    case BFD_RELOC_860_SPLIT1:
-      rtype = R_860_SPLIT1;
-      break;
-    case BFD_RELOC_860_LOW2:
-      rtype = R_860_LOW2;
-      break;
-    case BFD_RELOC_860_SPLIT2:
-      rtype = R_860_SPLIT2;
-      break;
-    case BFD_RELOC_860_LOW3:
-      rtype = R_860_LOW3;
-      break;
-    case BFD_RELOC_860_LOGOT0:
-      rtype = R_860_LOGOT0;
-      break;
-    case BFD_RELOC_860_SPGOT0:
-      rtype = R_860_SPGOT0;
-      break;
-    case BFD_RELOC_860_LOGOT1:
-      rtype = R_860_LOGOT1;
-      break;
-    case BFD_RELOC_860_SPGOT1:
-      rtype = R_860_SPGOT1;
-      break;
-    case BFD_RELOC_860_LOGOTOFF0:
-      rtype = R_860_LOGOTOFF0;
-      break;
-    case BFD_RELOC_860_SPGOTOFF0:
-      rtype = R_860_SPGOTOFF0;
-      break;
-    case BFD_RELOC_860_LOGOTOFF1:
-      rtype = R_860_LOGOTOFF1;
-      break;
-    case BFD_RELOC_860_SPGOTOFF1:
-      rtype = R_860_SPGOTOFF1;
-      break;
-    case BFD_RELOC_860_LOGOTOFF2:
-      rtype = R_860_LOGOTOFF2;
-      break;
-    case BFD_RELOC_860_LOGOTOFF3:
-      rtype = R_860_LOGOTOFF3;
-      break;
-    case BFD_RELOC_860_LOPC:
-      rtype = R_860_LOPC;
-      break;
-    case BFD_RELOC_860_HIGHADJ:
-      rtype = R_860_HIGHADJ;
-      break;
-    case BFD_RELOC_860_HAGOT:
-      rtype = R_860_HAGOT;
-      break;
-    case BFD_RELOC_860_HAGOTOFF:
-      rtype = R_860_HAGOTOFF;
-      break;
-    case BFD_RELOC_860_HAPC:
-      rtype = R_860_HAPC;
-      break;
-    case BFD_RELOC_860_HIGH:
-      rtype = R_860_HIGH;
-      break;
-    case BFD_RELOC_860_HIGOT:
-      rtype = R_860_HIGOT;
-      break;
-    case BFD_RELOC_860_HIGOTOFF:
-      rtype = R_860_HIGOTOFF;
-      break;
-    default:
-      return NULL;
-    }
-  return lookup_howto (abfd, rtype);
-}
-
-static reloc_howto_type *
-elf32_i860_reloc_name_lookup (bfd *abfd ATTRIBUTE_UNUSED,
-			      const char *r_name)
-{
-  unsigned int i;
-
-  for (i = 0;
-       i < (sizeof (elf32_i860_howto_table)
-	    / sizeof (elf32_i860_howto_table[0]));
-       i++)
-    if (elf32_i860_howto_table[i].name != NULL
-	&& strcasecmp (elf32_i860_howto_table[i].name, r_name) == 0)
-      return &elf32_i860_howto_table[i];
-
-  return NULL;
-}
-
-/* Given a ELF reloc, return the matching HOWTO structure.  */
-
-static bfd_boolean
-elf32_i860_info_to_howto_rela (bfd *abfd,
-			       arelent *bfd_reloc,
-			       Elf_Internal_Rela *elf_reloc)
-{
-  bfd_reloc->howto
-    = lookup_howto (abfd, (unsigned) ELF32_R_TYPE (elf_reloc->r_info));
-  return bfd_reloc->howto != NULL;
-}
-
-/* Specialized relocation handler for R_860_SPLITn.  These relocations
-   involves a 16-bit field that is split into two contiguous parts.  */
-static bfd_reloc_status_type
-elf32_i860_relocate_splitn (bfd *input_bfd,
-			    Elf_Internal_Rela *rello,
-			    bfd_byte *contents,
-			    bfd_vma value)
-{
-  bfd_vma insn;
-  reloc_howto_type *howto;
-  howto = lookup_howto (input_bfd, (unsigned) ELF32_R_TYPE (rello->r_info));
-  insn = bfd_get_32 (input_bfd, contents + rello->r_offset);
-
-  /* Relocate.  */
-  value += rello->r_addend;
-
-  /* Separate the fields and insert.  */
-  value = (((value & 0xf800) << 5) | (value & 0x7ff)) & howto->dst_mask;
-  insn = (insn & ~howto->dst_mask) | value;
-
-  bfd_put_32 (input_bfd, insn, contents + rello->r_offset);
-  return bfd_reloc_ok;
-}
-
-/* Specialized relocation handler for R_860_PC16.  This relocation
-   involves a 16-bit, PC-relative field that is split into two contiguous
-   parts.  */
-static bfd_reloc_status_type
-elf32_i860_relocate_pc16 (bfd *input_bfd,
-			  asection *input_section,
-			  Elf_Internal_Rela *rello,
-			  bfd_byte *contents,
-			  bfd_vma value)
-{
-  bfd_vma insn;
-  reloc_howto_type *howto;
-  howto = lookup_howto (input_bfd, (unsigned) ELF32_R_TYPE (rello->r_info));
-  insn = bfd_get_32 (input_bfd, contents + rello->r_offset);
-
-  /* Adjust for PC-relative relocation.  */
-  value -= (input_section->output_section->vma
-	    + input_section->output_offset);
-  value -= rello->r_offset;
-
-  /* Relocate.  */
-  value += rello->r_addend;
-
-  /* Adjust the value by 4, then separate the fields and insert.  */
-  value = (value - 4) >> howto->rightshift;
-  value = (((value & 0xf800) << 5) | (value & 0x7ff)) & howto->dst_mask;
-  insn = (insn & ~howto->dst_mask) | value;
-
-  bfd_put_32 (input_bfd, insn, contents + rello->r_offset);
-  return bfd_reloc_ok;
-
-}
-
-/* Specialized relocation handler for R_860_PC26.  This relocation
-   involves a 26-bit, PC-relative field which must be adjusted by 4.  */
-static bfd_reloc_status_type
-elf32_i860_relocate_pc26 (bfd *input_bfd,
-			  asection *input_section,
-			  Elf_Internal_Rela *rello,
-			  bfd_byte *contents,
-			  bfd_vma value)
-{
-  bfd_vma insn;
-  reloc_howto_type *howto;
-  howto = lookup_howto (input_bfd, (unsigned) ELF32_R_TYPE (rello->r_info));
-  insn = bfd_get_32 (input_bfd, contents + rello->r_offset);
-
-  /* Adjust for PC-relative relocation.  */
-  value -= (input_section->output_section->vma
-	    + input_section->output_offset);
-  value -= rello->r_offset;
-
-  /* Relocate.  */
-  value += rello->r_addend;
-
-  /* Adjust value by 4 and insert the field.  */
-  value = ((value - 4) >> howto->rightshift) & howto->dst_mask;
-  insn = (insn & ~howto->dst_mask) | value;
-
-  bfd_put_32 (input_bfd, insn, contents + rello->r_offset);
-  return bfd_reloc_ok;
-
-}
-
-/* Specialized relocation handler for R_860_HIGHADJ.  */
-static bfd_reloc_status_type
-elf32_i860_relocate_highadj (bfd *input_bfd,
-			     Elf_Internal_Rela *rel,
-			     bfd_byte *contents,
-			     bfd_vma value)
-{
-  bfd_vma insn;
-
-  insn = bfd_get_32 (input_bfd, contents + rel->r_offset);
-
-  value += rel->r_addend;
-  value += 0x8000;
-  value = ((value >> 16) & 0xffff);
-
-  insn = (insn & 0xffff0000) | value;
-
-  bfd_put_32 (input_bfd, insn, contents + rel->r_offset);
-  return bfd_reloc_ok;
-}
-
-/* Perform a single relocation.  By default we use the standard BFD
-   routines. However, we handle some specially.  */
-static bfd_reloc_status_type
-i860_final_link_relocate (reloc_howto_type *howto,
-			  bfd *input_bfd,
-			  asection *input_section,
-			  bfd_byte *contents,
-			  Elf_Internal_Rela *rel,
-			  bfd_vma relocation)
-{
-  return _bfd_final_link_relocate (howto, input_bfd, input_section,
-				   contents, rel->r_offset, relocation,
-				   rel->r_addend);
-}
-
-/* Relocate an i860 ELF section.
-
-   This is boiler-plate code copied from fr30.
-
-   The RELOCATE_SECTION function is called by the new ELF backend linker
-   to handle the relocations for a section.
-
-   The relocs are always passed as Rela structures; if the section
-   actually uses Rel structures, the r_addend field will always be
-   zero.
-
-   This function is responsible for adjusting the section contents as
-   necessary, and (if using Rela relocs and generating a relocatable
-   output file) adjusting the reloc addend as necessary.
-
-   This function does not have to worry about setting the reloc
-   address or the reloc symbol index.
-
-   LOCAL_SYMS is a pointer to the swapped in local symbols.
-
-   LOCAL_SECTIONS is an array giving the section in the input file
-   corresponding to the st_shndx field of each local symbol.
-
-   The global hash table entry for the global symbols can be found
-   via elf_sym_hashes (input_bfd).
-
-   When generating relocatable output, this function must handle
-   STB_LOCAL/STT_SECTION symbols specially.  The output symbol is
-   going to be the section symbol corresponding to the output
-   section, which means that the addend must be adjusted
-   accordingly.  */
-static bfd_boolean
-elf32_i860_relocate_section (bfd *output_bfd ATTRIBUTE_UNUSED,
-			     struct bfd_link_info *info,
-			     bfd *input_bfd,
-			     asection *input_section,
-			     bfd_byte *contents,
-			     Elf_Internal_Rela *relocs,
-			     Elf_Internal_Sym *local_syms,
-			     asection **local_sections)
-{
-  Elf_Internal_Shdr *symtab_hdr;
-  struct elf_link_hash_entry **sym_hashes;
-  Elf_Internal_Rela *rel;
-  Elf_Internal_Rela *relend;
-
-  symtab_hdr = & elf_tdata (input_bfd)->symtab_hdr;
-  sym_hashes = elf_sym_hashes (input_bfd);
-  relend     = relocs + input_section->reloc_count;
-
-  for (rel = relocs; rel < relend; rel ++)
-    {
-      reloc_howto_type *	   howto;
-      unsigned long		   r_symndx;
-      Elf_Internal_Sym *	   sym;
-      asection *		   sec;
-      struct elf_link_hash_entry * h;
-      bfd_vma			   relocation;
-      bfd_reloc_status_type	   r;
-      const char *		   name = NULL;
-      int			   r_type;
-
-      r_type = ELF32_R_TYPE (rel->r_info);
-      r_symndx = ELF32_R_SYM (rel->r_info);
-
-      howto = lookup_howto (input_bfd, (unsigned) ELF32_R_TYPE (rel->r_info));
-      h     = NULL;
-      sym   = NULL;
-      sec   = NULL;
-
-      if (r_symndx < symtab_hdr->sh_info)
-	{
-	  sym = local_syms + r_symndx;
-	  sec = local_sections [r_symndx];
-	  relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel);
-
-	  name = bfd_elf_string_from_elf_section
-	    (input_bfd, symtab_hdr->sh_link, sym->st_name);
-	  name = (name == NULL) ? bfd_section_name (input_bfd, sec) : name;
-	}
-      else
-	{
-	  bfd_boolean unresolved_reloc, warned, ignored;
-
-	  RELOC_FOR_GLOBAL_SYMBOL (info, input_bfd, input_section, rel,
-				   r_symndx, symtab_hdr, sym_hashes,
-				   h, sec, relocation,
-				   unresolved_reloc, warned, ignored);
-	}
-
-      if (sec != NULL && discarded_section (sec))
-	RELOC_AGAINST_DISCARDED_SECTION (info, input_bfd, input_section,
-					 rel, 1, relend, howto, 0, contents);
-
-      if (bfd_link_relocatable (info))
-	continue;
-
-      switch (r_type)
-	{
-	default:
-	  r = i860_final_link_relocate (howto, input_bfd, input_section,
-					contents, rel, relocation);
-	  break;
-
-	case R_860_HIGHADJ:
-	  r = elf32_i860_relocate_highadj (input_bfd, rel, contents,
-					   relocation);
-	  break;
-
-	case R_860_PC16:
-	  r = elf32_i860_relocate_pc16 (input_bfd, input_section, rel,
-					contents, relocation);
-	  break;
-
-	case R_860_PC26:
-	  r = elf32_i860_relocate_pc26 (input_bfd, input_section, rel,
-					contents, relocation);
-	  break;
-
-	case R_860_SPLIT0:
-	case R_860_SPLIT1:
-	case R_860_SPLIT2:
-	  r = elf32_i860_relocate_splitn (input_bfd, rel, contents,
-					  relocation);
-	  break;
-
-	/* We do not yet handle GOT/PLT/Dynamic relocations.  */
-	case R_860_COPY:
-	case R_860_GLOB_DAT:
-	case R_860_JUMP_SLOT:
-	case R_860_RELATIVE:
-	case R_860_PLT26:
-	case R_860_LOGOT0:
-	case R_860_SPGOT0:
-	case R_860_LOGOT1:
-	case R_860_SPGOT1:
-	case R_860_LOGOTOFF0:
-	case R_860_SPGOTOFF0:
-	case R_860_LOGOTOFF1:
-	case R_860_SPGOTOFF1:
-	case R_860_LOGOTOFF2:
-	case R_860_LOGOTOFF3:
-	case R_860_LOPC:
-	case R_860_HAGOT:
-	case R_860_HAGOTOFF:
-	case R_860_HAPC:
-	case R_860_HIGOT:
-	case R_860_HIGOTOFF:
-	  r = bfd_reloc_notsupported;
-	  break;
-	}
-
-      if (r != bfd_reloc_ok)
-	{
-	  const char * msg = (const char *) NULL;
-
-	  switch (r)
-	    {
-	    case bfd_reloc_overflow:
-	      (*info->callbacks->reloc_overflow)
-		(info, (h ? &h->root : NULL), name, howto->name,
-		 (bfd_vma) 0, input_bfd, input_section, rel->r_offset);
-	      break;
-
-	    case bfd_reloc_undefined:
-	      (*info->callbacks->undefined_symbol)
-		(info, name, input_bfd, input_section, rel->r_offset, TRUE);
-	      break;
-
-	    case bfd_reloc_outofrange:
-	      msg = _("internal error: out of range error");
-	      break;
-
-	    case bfd_reloc_notsupported:
-	      msg = _("internal error: unsupported relocation error");
-	      break;
-
-	    case bfd_reloc_dangerous:
-	      msg = _("internal error: dangerous relocation");
-	      break;
-
-	    default:
-	      msg = _("internal error: unknown error");
-	      break;
-	    }
-
-	  if (msg)
-	    (*info->callbacks->warning) (info, msg, name, input_bfd,
-					 input_section, rel->r_offset);
-	}
-    }
-
-  return TRUE;
-}
-
-/* Return whether a symbol name implies a local label.  SVR4/860 compilers
-   generate labels of the form ".ep.function_name" to denote the end of a
-   function prolog. These should be local.
-   ??? Do any other SVR4 compilers have this convention? If so, this should
-   be added to the generic routine.  */
-static bfd_boolean
-elf32_i860_is_local_label_name (bfd *abfd, const char *name)
-{
-  if (name[0] == '.' && name[1] == 'e' && name[2] == 'p' && name[3] == '.')
-    return TRUE;
-
-  return _bfd_elf_is_local_label_name (abfd, name);
-}
-
-#define TARGET_BIG_SYM		i860_elf32_vec
-#define TARGET_BIG_NAME		"elf32-i860"
-#define TARGET_LITTLE_SYM	i860_elf32_le_vec
-#define TARGET_LITTLE_NAME	"elf32-i860-little"
-#define ELF_ARCH		bfd_arch_i860
-#define ELF_MACHINE_CODE	EM_860
-#define ELF_MAXPAGESIZE		4096
-
-#define elf_backend_rela_normal			1
-#define elf_info_to_howto_rel			NULL
-#define elf_info_to_howto			elf32_i860_info_to_howto_rela
-#define elf_backend_relocate_section		elf32_i860_relocate_section
-#define bfd_elf32_bfd_reloc_type_lookup		elf32_i860_reloc_type_lookup
-#define bfd_elf32_bfd_reloc_name_lookup	elf32_i860_reloc_name_lookup
-#define bfd_elf32_bfd_is_local_label_name	elf32_i860_is_local_label_name
-
-#include "elf32-target.h"
diff --git a/bfd/elf32-i960.c b/bfd/elf32-i960.c
deleted file mode 100644
index 244e4ea..0000000
--- a/bfd/elf32-i960.c
+++ /dev/null
@@ -1,169 +0,0 @@
-/* Intel 960 specific support for 32-bit ELF
-   Copyright (C) 1999-2018 Free Software Foundation, Inc.
-
-   This file is part of BFD, the Binary File Descriptor library.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 3 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
-   MA 02110-1301, USA.  */
-
-#include "sysdep.h"
-#include "bfd.h"
-#include "libbfd.h"
-#include "elf-bfd.h"
-#include "elf/i960.h"
-
-#define USE_REL 1
-
-#define bfd_elf32_bfd_reloc_type_lookup	elf32_i960_reloc_type_lookup
-#define bfd_elf32_bfd_reloc_name_lookup \
-  elf32_i960_reloc_name_lookup
-#define elf_info_to_howto		NULL
-#define elf_info_to_howto_rel		elf32_i960_info_to_howto_rel
-
-/* ELF relocs are against symbols.  If we are producing relocatable
-   output, and the reloc is against an external symbol, and nothing
-   has given us any additional addend, the resulting reloc will also
-   be against the same symbol.  In such a case, we don't want to
-   change anything about the way the reloc is handled, since it will
-   all be done at final link time.  Rather than put special case code
-   into bfd_perform_relocation, all the reloc types use this howto
-   function.  It just short circuits the reloc if producing
-   relocatable output against an external symbol.  */
-
-static bfd_reloc_status_type
-elf32_i960_relocate (bfd *abfd ATTRIBUTE_UNUSED,
-		     arelent *reloc_entry,
-		     asymbol *symbol,
-		     void * data ATTRIBUTE_UNUSED,
-		     asection *input_section,
-		     bfd *output_bfd,
-		     char **error_message ATTRIBUTE_UNUSED)
-{
-  /* HACK: I think this first condition is necessary when producing
-     relocatable output.  After the end of HACK, the code is identical
-     to bfd_elf_generic_reloc().  I would _guess_ the first change
-     belongs there rather than here.  martindo 1998-10-23.  */
-  if (output_bfd != (bfd *) NULL
-      && reloc_entry->howto->pc_relative
-      && !reloc_entry->howto->pcrel_offset)
-    reloc_entry->addend -= symbol->value;
-
-  /* This is more dubious.  */
-  else if (output_bfd != (bfd *) NULL
-	   && (symbol->flags & BSF_SECTION_SYM) != 0)
-    reloc_entry->addend -= symbol->section->output_section->vma;
-
-  else
-    {
-      /* ...end of HACK.  */
-      if (output_bfd != (bfd *) NULL
-	  && (symbol->flags & BSF_SECTION_SYM) == 0
-	  && (! reloc_entry->howto->partial_inplace
-	      || reloc_entry->addend == 0))
-	{
-	  reloc_entry->address += input_section->output_offset;
-	  return bfd_reloc_ok;
-	}
-    }
-
-  return bfd_reloc_continue;
-}
-
-static reloc_howto_type elf_howto_table[]=
-{
-  HOWTO (R_960_NONE, 0, 3, 0, FALSE, 0, complain_overflow_dont,
-	 elf32_i960_relocate, "R_960_NONE", TRUE,
-	 0x00000000, 0x00000000, FALSE),
-  EMPTY_HOWTO (1),
-  HOWTO (R_960_32, 0, 2, 32, FALSE, 0, complain_overflow_bitfield,
-	 elf32_i960_relocate, "R_960_32", TRUE,
-	 0xffffffff, 0xffffffff, FALSE),
-  HOWTO (R_960_IP24, 0, 2, 24, TRUE, 0, complain_overflow_signed,
-	 elf32_i960_relocate, "R_960_IP24 ", TRUE,
-	 0x00ffffff, 0x00ffffff, FALSE),
-  EMPTY_HOWTO (4),
-  EMPTY_HOWTO (5),
-  EMPTY_HOWTO (6),
-  EMPTY_HOWTO (7)
-};
-
-static enum elf_i960_reloc_type
-elf32_i960_bfd_to_reloc_type (bfd_reloc_code_real_type code)
-{
-  switch (code)
-    {
-    default:
-      return R_960_NONE;
-    case BFD_RELOC_I960_CALLJ:
-      return R_960_OPTCALL;
-    case BFD_RELOC_32:
-    case BFD_RELOC_CTOR:
-      return R_960_32;
-    case BFD_RELOC_24_PCREL:
-      return R_960_IP24;
-    }
-}
-
-static bfd_boolean
-elf32_i960_info_to_howto_rel (bfd *abfd ATTRIBUTE_UNUSED,
-			      arelent *cache_ptr,
-			      Elf_Internal_Rela *dst)
-{
-  enum elf_i960_reloc_type type;
-
-  type = (enum elf_i960_reloc_type) ELF32_R_TYPE (dst->r_info);
-
-  /* PR 17521: file: 9609b8d6.  */
-  if (type >= R_960_max)
-    {
-      /* xgettext:c-format */
-      _bfd_error_handler (_("%pB: unsupported relocation type %#x"),
-			  abfd, type);
-      bfd_set_error (bfd_error_bad_value);
-      return FALSE;
-    }
-
-  cache_ptr->howto = &elf_howto_table[(int) type];
-  return TRUE;
-}
-
-static reloc_howto_type *
-elf32_i960_reloc_type_lookup (bfd *abfd ATTRIBUTE_UNUSED,
-			      bfd_reloc_code_real_type code)
-{
-  return elf_howto_table + elf32_i960_bfd_to_reloc_type (code);
-}
-
-static reloc_howto_type *
-elf32_i960_reloc_name_lookup (bfd *abfd ATTRIBUTE_UNUSED,
-			      const char *r_name)
-{
-  unsigned int i;
-
-  for (i = 0; i < sizeof (elf_howto_table) / sizeof (elf_howto_table[0]); i++)
-    if (elf_howto_table[i].name != NULL
-	&& strcasecmp (elf_howto_table[i].name, r_name) == 0)
-      return &elf_howto_table[i];
-
-  return NULL;
-}
-
-#define TARGET_LITTLE_SYM	i960_elf32_vec
-#define TARGET_LITTLE_NAME	"elf32-i960"
-#define ELF_ARCH		bfd_arch_i960
-#define ELF_MACHINE_CODE	EM_960
-#define ELF_MAXPAGESIZE		1 /* FIXME: This number is wrong,  It should be the page size in bytes.  */
-
-#include "elf32-target.h"
diff --git a/bfd/hosts/i860mach3.h b/bfd/hosts/i860mach3.h
deleted file mode 100644
index f18ff37..0000000
--- a/bfd/hosts/i860mach3.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* Copyright (C) 2007-2018 Free Software Foundation, Inc.
-
-   This file is part of BFD, the Binary File Descriptor library.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 3 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
-   MA 02110-1301, USA.  */
-
-/* This file was hacked from i386mach3.h   [dolan@ssd.intel.com] */
-
-#include <machine/vmparam.h>
-#include <sys/param.h>
-
-/* This is an ugly way to hack around the incorrect
- * definition of UPAGES in i386/machparam.h.
- *
- * The definition should specify the size reserved
- * for "struct user" in core files in PAGES,
- * but instead it gives it in 512-byte core-clicks
- * for i386 and i860. UPAGES is used only in trad-core.c.
- */
-#if UPAGES == 16
-#undef  UPAGES
-#define UPAGES 2
-#endif
-
-#if UPAGES != 2
-FIXME!! UPAGES is neither 2 nor 16
-#endif
-
-#define	HOST_PAGE_SIZE		1
-#define	HOST_SEGMENT_SIZE	NBPG
-#define	HOST_MACHINE_ARCH	bfd_arch_i860
-#define	HOST_TEXT_START_ADDR	USRTEXT
-#define	HOST_STACK_END_ADDR	USRSTACK
diff --git a/bfd/ieee.c b/bfd/ieee.c
index 7285ee5..aa10aa2 100644
--- a/bfd/ieee.c
+++ b/bfd/ieee.c
@@ -3567,34 +3567,6 @@ ieee_write_processor (bfd *abfd)
 	return FALSE;
       break;
 
-    case bfd_arch_i960:
-      switch (arch->mach)
-	{
-	default:
-	case bfd_mach_i960_core:
-	case bfd_mach_i960_ka_sa:
-	  if (! ieee_write_id (abfd, "80960KA"))
-	    return FALSE;
-	  break;
-
-	case bfd_mach_i960_kb_sb:
-	  if (! ieee_write_id (abfd, "80960KB"))
-	    return FALSE;
-	  break;
-
-	case bfd_mach_i960_ca:
-	  if (! ieee_write_id (abfd, "80960CA"))
-	    return FALSE;
-	  break;
-
-	case bfd_mach_i960_mc:
-	case bfd_mach_i960_xa:
-	  if (! ieee_write_id (abfd, "80960MC"))
-	    return FALSE;
-	  break;
-	}
-      break;
-
     case bfd_arch_m68k:
       {
 	const char *id;
diff --git a/bfd/libbfd.h b/bfd/libbfd.h
index 4af1019..5a087a7 100644
--- a/bfd/libbfd.h
+++ b/bfd/libbfd.h
@@ -981,7 +981,6 @@ static const char *const bfd_reloc_code_real_names[] = { "@@uninitialized@@",
   "BFD_RELOC_LO10",
   "BFD_RELOC_GPREL16",
   "BFD_RELOC_GPREL32",
-  "BFD_RELOC_I960_CALLJ",
   "BFD_RELOC_NONE",
   "BFD_RELOC_SPARC_WDISP22",
   "BFD_RELOC_SPARC22",
@@ -2588,38 +2587,6 @@ static const char *const bfd_reloc_code_real_names[] = { "@@uninitialized@@",
   "BFD_RELOC_CRIS_16_TPREL",
   "BFD_RELOC_CRIS_DTPMOD",
   "BFD_RELOC_CRIS_32_IE",
-  "BFD_RELOC_860_COPY",
-  "BFD_RELOC_860_GLOB_DAT",
-  "BFD_RELOC_860_JUMP_SLOT",
-  "BFD_RELOC_860_RELATIVE",
-  "BFD_RELOC_860_PC26",
-  "BFD_RELOC_860_PLT26",
-  "BFD_RELOC_860_PC16",
-  "BFD_RELOC_860_LOW0",
-  "BFD_RELOC_860_SPLIT0",
-  "BFD_RELOC_860_LOW1",
-  "BFD_RELOC_860_SPLIT1",
-  "BFD_RELOC_860_LOW2",
-  "BFD_RELOC_860_SPLIT2",
-  "BFD_RELOC_860_LOW3",
-  "BFD_RELOC_860_LOGOT0",
-  "BFD_RELOC_860_SPGOT0",
-  "BFD_RELOC_860_LOGOT1",
-  "BFD_RELOC_860_SPGOT1",
-  "BFD_RELOC_860_LOGOTOFF0",
-  "BFD_RELOC_860_SPGOTOFF0",
-  "BFD_RELOC_860_LOGOTOFF1",
-  "BFD_RELOC_860_SPGOTOFF1",
-  "BFD_RELOC_860_LOGOTOFF2",
-  "BFD_RELOC_860_LOGOTOFF3",
-  "BFD_RELOC_860_LOPC",
-  "BFD_RELOC_860_HIGHADJ",
-  "BFD_RELOC_860_HAGOT",
-  "BFD_RELOC_860_HAGOTOFF",
-  "BFD_RELOC_860_HAPC",
-  "BFD_RELOC_860_HIGH",
-  "BFD_RELOC_860_HIGOT",
-  "BFD_RELOC_860_HIGOTOFF",
   "BFD_RELOC_OR1K_REL_26",
   "BFD_RELOC_OR1K_GOTPC_HI16",
   "BFD_RELOC_OR1K_GOTPC_LO16",
diff --git a/bfd/mach-o.c b/bfd/mach-o.c
index f26be0c..ded60cf 100644
--- a/bfd/mach-o.c
+++ b/bfd/mach-o.c
@@ -1047,9 +1047,6 @@ bfd_mach_o_convert_architecture (bfd_mach_o_cpu_type mtype,
       *type = bfd_arch_sparc;
       *subtype = bfd_mach_sparc;
       break;
-    case BFD_MACH_O_CPU_TYPE_I860:
-      *type = bfd_arch_i860;
-      break;
     case BFD_MACH_O_CPU_TYPE_ALPHA:
       *type = bfd_arch_alpha;
       break;
@@ -5446,8 +5443,6 @@ bfd_mach_o_stack_addr (enum bfd_mach_o_cpu_type type)
       return 0xc0000000;
     case BFD_MACH_O_CPU_TYPE_SPARC:
       return 0xf0000000;
-    case BFD_MACH_O_CPU_TYPE_I860:
-      return 0;
     case BFD_MACH_O_CPU_TYPE_HPPA:
       return 0xc0000000 - 0x04000000;
     default:
diff --git a/bfd/po/SRC-POTFILES.in b/bfd/po/SRC-POTFILES.in
index 7ea56ca..afa459e 100644
--- a/bfd/po/SRC-POTFILES.in
+++ b/bfd/po/SRC-POTFILES.in
@@ -1,6 +1,5 @@
 aix386-core.c
 aix5ppc-core.c
-aout-adobe.c
 aout-arm.c
 aout-cris.c
 aout-ns32k.c
@@ -20,7 +19,6 @@ bfd.c
 bfdio.c
 bfdwin.c
 binary.c
-bout.c
 cache.c
 cf-i386lynx.c
 cf-sparclynx.c
@@ -34,8 +32,6 @@ coff-go32.c
 coff-h8300.c
 coff-h8500.c
 coff-i386.c
-coff-i860.c
-coff-i960.c
 coff-m68k.c
 coff-m88k.c
 coff-mips.c
@@ -83,8 +79,6 @@ cpu-h8500.c
 cpu-hppa.c
 cpu-i370.c
 cpu-i386.c
-cpu-i860.c
-cpu-i960.c
 cpu-ia64.c
 cpu-iamcu.c
 cpu-ip2k.c
@@ -190,8 +184,6 @@ elf32-hppa.c
 elf32-hppa.h
 elf32-i370.c
 elf32-i386.c
-elf32-i860.c
-elf32-i960.c
 elf32-ip2k.c
 elf32-iq2000.c
 elf32-lm32.c
diff --git a/bfd/reloc.c b/bfd/reloc.c
index ca1d81c..9da9128 100644
--- a/bfd/reloc.c
+++ b/bfd/reloc.c
@@ -87,10 +87,9 @@ CODE_FRAGMENT
 .  {* The symbol to relocate against was undefined.  *}
 .  bfd_reloc_undefined,
 .
-.  {* The relocation was performed, but may not be ok - presently
-.     generated only when linking i960 coff files with i960 b.out
-.     symbols.  If this type is returned, the error_message argument
-.     to bfd_perform_relocation will be set.  *}
+.  {* The relocation was performed, but may not be ok.  If this type is
+.     returned, the error_message argument to bfd_perform_relocation
+.     will be set.  *}
 .  bfd_reloc_dangerous
 . }
 . bfd_reloc_status_type;
@@ -318,8 +317,7 @@ CODE_FRAGMENT
 .
 .  {* If this field is non null, then the supplied function is
 .     called rather than the normal function.  This allows really
-.     strange relocation methods to be accommodated (e.g., i960 callj
-.     instructions).  *}
+.     strange relocation methods to be accommodated.  *}
 .  bfd_reloc_status_type (*special_function)
 .    (bfd *, arelent *, struct bfd_symbol *, void *, asection *,
 .     bfd *, char **);
@@ -1739,8 +1737,6 @@ ENUMDOC
 of the relocation itself; sometimes they are relative to the start of
 the section containing the relocation.  It depends on the specific target.
 
-The 24-bit relocation is used in some Intel 960 configurations.
-
 ENUM
   BFD_RELOC_32_SECREL
 ENUMDOC
@@ -1892,11 +1888,6 @@ handled specially, because the value the register will have is
 decided relatively late.
 
 ENUM
-  BFD_RELOC_I960_CALLJ
-ENUMDOC
-  Reloc types used for i960/b.out.
-
-ENUM
   BFD_RELOC_NONE
 ENUMX
   BFD_RELOC_SPARC_WDISP22
@@ -6225,73 +6216,6 @@ ENUMDOC
   Relocs used in TLS code for CRIS.
 
 ENUM
-  BFD_RELOC_860_COPY
-ENUMX
-  BFD_RELOC_860_GLOB_DAT
-ENUMX
-  BFD_RELOC_860_JUMP_SLOT
-ENUMX
-  BFD_RELOC_860_RELATIVE
-ENUMX
-  BFD_RELOC_860_PC26
-ENUMX
-  BFD_RELOC_860_PLT26
-ENUMX
-  BFD_RELOC_860_PC16
-ENUMX
-  BFD_RELOC_860_LOW0
-ENUMX
-  BFD_RELOC_860_SPLIT0
-ENUMX
-  BFD_RELOC_860_LOW1
-ENUMX
-  BFD_RELOC_860_SPLIT1
-ENUMX
-  BFD_RELOC_860_LOW2
-ENUMX
-  BFD_RELOC_860_SPLIT2
-ENUMX
-  BFD_RELOC_860_LOW3
-ENUMX
-  BFD_RELOC_860_LOGOT0
-ENUMX
-  BFD_RELOC_860_SPGOT0
-ENUMX
-  BFD_RELOC_860_LOGOT1
-ENUMX
-  BFD_RELOC_860_SPGOT1
-ENUMX
-  BFD_RELOC_860_LOGOTOFF0
-ENUMX
-  BFD_RELOC_860_SPGOTOFF0
-ENUMX
-  BFD_RELOC_860_LOGOTOFF1
-ENUMX
-  BFD_RELOC_860_SPGOTOFF1
-ENUMX
-  BFD_RELOC_860_LOGOTOFF2
-ENUMX
-  BFD_RELOC_860_LOGOTOFF3
-ENUMX
-  BFD_RELOC_860_LOPC
-ENUMX
-  BFD_RELOC_860_HIGHADJ
-ENUMX
-  BFD_RELOC_860_HAGOT
-ENUMX
-  BFD_RELOC_860_HAGOTOFF
-ENUMX
-  BFD_RELOC_860_HAPC
-ENUMX
-  BFD_RELOC_860_HIGH
-ENUMX
-  BFD_RELOC_860_HIGOT
-ENUMX
-  BFD_RELOC_860_HIGOTOFF
-ENUMDOC
-  Intel i860 Relocations.
-
-ENUM
   BFD_RELOC_OR1K_REL_26
 ENUMX
   BFD_RELOC_OR1K_GOTPC_HI16
diff --git a/bfd/targets.c b/bfd/targets.c
index 43102d4..34169c5 100644
--- a/bfd/targets.c
+++ b/bfd/targets.c
@@ -601,7 +601,6 @@ extern const bfd_target am33_elf32_linux_vec;
 extern const bfd_target aout0_be_vec;
 extern const bfd_target aout64_vec;
 extern const bfd_target aout_vec;
-extern const bfd_target aout_adobe_vec;
 extern const bfd_target arc_elf32_be_vec;
 extern const bfd_target arc_elf32_le_vec;
 extern const bfd_target arm_aout_be_vec;
@@ -634,8 +633,6 @@ extern const bfd_target arm_pei_wince_le_vec;
 extern const bfd_target avr_elf32_vec;
 extern const bfd_target bfin_elf32_vec;
 extern const bfd_target bfin_elf32_fdpic_vec;
-extern const bfd_target bout_be_vec;
-extern const bfd_target bout_le_vec;
 extern const bfd_target cr16_elf32_vec;
 extern const bfd_target cr16c_elf32_vec;
 extern const bfd_target cris_aout_vec;
@@ -688,10 +685,6 @@ extern const bfd_target i386_nlm32_vec;
 extern const bfd_target i386_pe_vec;
 extern const bfd_target i386_pei_vec;
 extern const bfd_target iamcu_elf32_vec;
-extern const bfd_target i860_coff_vec;
-extern const bfd_target i860_elf32_vec;
-extern const bfd_target i860_elf32_le_vec;
-extern const bfd_target i960_elf32_vec;
 extern const bfd_target ia64_elf32_be_vec;
 extern const bfd_target ia64_elf32_hpux_be_vec;
 extern const bfd_target ia64_elf64_be_vec;
@@ -699,8 +692,6 @@ extern const bfd_target ia64_elf64_le_vec;
 extern const bfd_target ia64_elf64_hpux_be_vec;
 extern const bfd_target ia64_elf64_vms_vec;
 extern const bfd_target ia64_pei_vec;
-extern const bfd_target icoff_be_vec;
-extern const bfd_target icoff_le_vec;
 extern const bfd_target ieee_vec;
 extern const bfd_target ip2k_elf32_vec;
 extern const bfd_target iq2000_elf32_vec;
@@ -1002,7 +993,6 @@ static const bfd_target * const _bfd_target_vector[] =
 	   which kind of a.out file it is.  */
 	&aout_vec,
 #endif
-	&aout_adobe_vec,
 
 	&arc_elf32_be_vec,
 	&arc_elf32_le_vec,
@@ -1044,9 +1034,6 @@ static const bfd_target * const _bfd_target_vector[] =
 	&bfin_elf32_vec,
 	&bfin_elf32_fdpic_vec,
 
-	&bout_be_vec,
-	&bout_le_vec,
-
 	&cr16_elf32_vec,
 	&cr16c_elf32_vec,
 
@@ -1130,12 +1117,6 @@ static const bfd_target * const _bfd_target_vector[] =
 
 	&iamcu_elf32_vec,
 
-	&i860_coff_vec,
-	&i860_elf32_vec,
-	&i860_elf32_le_vec,
-
-	&i960_elf32_vec,
-
 #ifdef BFD64
 #if 0
 	&ia64_elf32_be_vec,
@@ -1148,9 +1129,6 @@ static const bfd_target * const _bfd_target_vector[] =
 	&ia64_pei_vec,
 #endif
 
-	&icoff_be_vec,
-	&icoff_le_vec,
-
 	&ieee_vec,
 
 	&ip2k_elf32_vec,
diff --git a/binutils/ChangeLog b/binutils/ChangeLog
index 1028851..e95fa85 100644
--- a/binutils/ChangeLog
+++ b/binutils/ChangeLog
@@ -1,3 +1,12 @@
+2018-04-11  Alan Modra  <amodra@gmail.com>
+
+	* ieee.c: Remove i960 support.
+	* od-macho.c: Remove i860 support.
+	* readelf.c: Remove i860 and i960 support.
+	* testsuite/binutils-all/objcopy.exp: Likewise.
+	* testsuite/binutils-all/objdump.exp: Likewise.
+	* testsuite/lib/binutils-common.exp: Likewise.
+
 2018-04-11  Maciej W. Rozycki  <macro@mips.com>
 
 	* testsuite/lib/binutils-common.exp (is_elf_format): Also return
diff --git a/binutils/ieee.c b/binutils/ieee.c
index eab3e4d..902b882 100644
--- a/binutils/ieee.c
+++ b/binutils/ieee.c
@@ -3561,12 +3561,6 @@ ieee_regno_to_genreg (bfd *abfd, int r)
 	r += 2;
       break;
 
-    case bfd_arch_i960:
-      /* Stabs uses 0 to 15 for r0 to r15, 16 to 31 for g0 to g15, and
-         32 to 35 for fp0 to fp3.  */
-      --r;
-      break;
-
     default:
       break;
     }
@@ -3588,12 +3582,6 @@ ieee_genreg_to_regno (bfd *abfd, int r)
 	r -= 2;
       break;
 
-    case bfd_arch_i960:
-      /* Stabs uses 0 to 15 for r0 to r15, 16 to 31 for g0 to g15, and
-         32 to 35 for fp0 to fp3.  */
-      ++r;
-      break;
-
     default:
       break;
     }
diff --git a/binutils/od-macho.c b/binutils/od-macho.c
index 09cc218..fb2ed70 100644
--- a/binutils/od-macho.c
+++ b/binutils/od-macho.c
@@ -106,7 +106,6 @@ static const bfd_mach_o_xlat_name bfd_mach_o_cpu_name[] =
   { "arm", BFD_MACH_O_CPU_TYPE_ARM },
   { "mc88000", BFD_MACH_O_CPU_TYPE_MC88000 },
   { "sparc", BFD_MACH_O_CPU_TYPE_SPARC },
-  { "i860", BFD_MACH_O_CPU_TYPE_I860 },
   { "alpha", BFD_MACH_O_CPU_TYPE_ALPHA },
   { "powerpc", BFD_MACH_O_CPU_TYPE_POWERPC },
   { "powerpc_64", BFD_MACH_O_CPU_TYPE_POWERPC_64 },
diff --git a/binutils/readelf.c b/binutils/readelf.c
index 80075c2..166dd23 100644
--- a/binutils/readelf.c
+++ b/binutils/readelf.c
@@ -109,8 +109,6 @@
 #include "elf/hppa.h"
 #include "elf/i386.h"
 #include "elf/i370.h"
-#include "elf/i860.h"
-#include "elf/i960.h"
 #include "elf/ia64.h"
 #include "elf/ip2k.h"
 #include "elf/lm32.h"
@@ -765,7 +763,6 @@ guess_is_rela (unsigned int e_machine)
       /* Targets that use REL relocations.  */
     case EM_386:
     case EM_IAMCU:
-    case EM_960:
     case EM_ARM:
     case EM_D10V:
     case EM_CYGNUS_D10V:
@@ -779,7 +776,6 @@ guess_is_rela (unsigned int e_machine)
 
       /* Targets that use RELA relocations.  */
     case EM_68K:
-    case EM_860:
     case EM_AARCH64:
     case EM_ADAPTEVA_EPIPHANY:
     case EM_ALPHA:
@@ -1275,10 +1271,6 @@ dump_relocations (Filedata *          filedata,
 	  rtype = elf_m68k_reloc_type (type);
 	  break;
 
-	case EM_960:
-	  rtype = elf_i960_reloc_type (type);
-	  break;
-
 	case EM_AVR:
 	case EM_AVR_OLD:
 	  rtype = elf_avr_reloc_type (type);
@@ -1428,10 +1420,6 @@ dump_relocations (Filedata *          filedata,
 	  rtype = elf_cris_reloc_type (type);
 	  break;
 
-	case EM_860:
-	  rtype = elf_i860_reloc_type (type);
-	  break;
-
 	case EM_X86_64:
 	case EM_L1OM:
 	case EM_K1OM:
@@ -2264,7 +2252,6 @@ get_machine_name (unsigned e_machine)
     case EM_68K:		return "MC68000";
     case EM_88K:		return "MC88000";
     case EM_IAMCU:		return "Intel MCU";
-    case EM_860:		return "Intel 80860";
     case EM_MIPS:		return "MIPS R3000";
     case EM_S370:		return "IBM System/370";
       /* 10 */
@@ -2273,7 +2260,6 @@ get_machine_name (unsigned e_machine)
     case EM_PARISC:		return "HPPA";
     case EM_VPP550:		return "Fujitsu VPP500";
     case EM_SPARC32PLUS:	return "Sparc v8+" ;
-    case EM_960:		return "Intel 90860";
     case EM_PPC:		return "PowerPC";
       /* 20 */
     case EM_PPC64:		return "PowerPC64";
@@ -12195,10 +12181,6 @@ is_32bit_abs_reloc (Filedata * filedata, unsigned int reloc_type)
       return reloc_type == 1; /* R_386_32.  */
     case EM_68K:
       return reloc_type == 1; /* R_68K_32.  */
-    case EM_860:
-      return reloc_type == 1; /* R_860_32.  */
-    case EM_960:
-      return reloc_type == 2; /* R_960_32.  */
     case EM_AARCH64:
       return (reloc_type == 258
 	      || reloc_type == 1); /* R_AARCH64_ABS32 || R_AARCH64_P32_ABS32 */
diff --git a/binutils/testsuite/binutils-all/objcopy.exp b/binutils/testsuite/binutils-all/objcopy.exp
index b308fd7..68fccbe 100644
--- a/binutils/testsuite/binutils-all/objcopy.exp
+++ b/binutils/testsuite/binutils-all/objcopy.exp
@@ -80,7 +80,6 @@ proc objcopy_test {testname srcfile} {
 	setup_xfail "h8300-*-coff"
 	setup_xfail "h8500-*-rtems*" "h8500-*-coff"
 	setup_xfail "hppa*-*-*"
-	setup_xfail "i960-*"
 	setup_xfail "m68*-*-*coff" "m68*-*-hpux*" "m68*-*-lynxos*"
 	setup_xfail "m68*-*-sysv*" "m68*-apple-aux*"
 	setup_xfail "m8*-*"
@@ -1091,7 +1090,6 @@ if [is_elf_format] {
 	       || [istarget "d10v-*"] \
 	       || [istarget "dlx-*"] \
 	       || [istarget "i*86-*"] \
-	       || [istarget "i960-*"] \
 	       || [istarget "m681*-*"] \
 	       || [istarget "m68hc1*-*"] \
 	       || ([istarget "mips*-*"] \
diff --git a/binutils/testsuite/binutils-all/objdump.exp b/binutils/testsuite/binutils-all/objdump.exp
index f006d64..5a31834 100644
--- a/binutils/testsuite/binutils-all/objdump.exp
+++ b/binutils/testsuite/binutils-all/objdump.exp
@@ -35,7 +35,7 @@ set got [binutils_run $OBJDUMP "$OBJDUMPFLAGS -i"]
 
 set cpus_expected [list]
 lappend cpus_expected aarch64 alpha am33-2 arc ARC700 ARCv2 arm cris
-lappend cpus_expected d10v d30v fr30 fr500 fr550 h8 hppa i386 i860 i960 iamcu ip2022
+lappend cpus_expected d10v d30v fr30 fr500 fr550 h8 hppa i386 iamcu ip2022
 lappend cpus_expected m16c m32c m32r m68hc11 m68hc12 m68k m88k MCore mep c5 h1 MicroBlaze
 lappend cpus_expected mips mn10200 mn10300 ms1 msp MSP430 nds32 n1h_v3 ns32k
 lappend cpus_expected or1k or1knd pj powerpc pyramid riscv romp rs6000 s390 sh sparc
@@ -279,7 +279,6 @@ if { ![is_elf_format] } then {
 if { ![is_elf_format]
      || [istarget "hppa64*-*-hpux*"]
      || [istarget "i370-*-*"]
-     || [istarget "i960-*-*"]
      || [istarget "ia64*-*-*"]
      || [istarget "mcore-*-*"]
      || [istarget "moxie-*-*"]
diff --git a/binutils/testsuite/lib/binutils-common.exp b/binutils/testsuite/lib/binutils-common.exp
index 325a07c..13f09b1 100644
--- a/binutils/testsuite/lib/binutils-common.exp
+++ b/binutils/testsuite/lib/binutils-common.exp
@@ -59,8 +59,7 @@ proc is_elf_format {} {
 	 || [istarget *-*-linux*oldld*]
 	 || [istarget *-*-rtemscoff*]
 	 || [istarget h8500-*-rtems*]
-	 || [istarget i?86-*-freebsd\[12\].*]
-	 || [istarget i960-*-rtems*] } {
+	 || [istarget i?86-*-freebsd\[12\].*] } {
 	return 0
     }
 
@@ -173,7 +172,7 @@ proc is_elf64 { binary_file } {
 # and Visium targets set OSABI to ELFOSABI_STANDALONE and cannot
 # support STB_GNU_UNIQUE.  Likewise non-EABI ARM targets set OSABI to
 # ELFOSABI_ARM, and TI C6X targets to ELFOSABI_C6000_*.  Finally
-# rather than `bfd_elf_final_link' AM33/2.0, D30V, DLX, i960, and
+# rather than `bfd_elf_final_link' AM33/2.0, D30V, DLX, and
 # picoJava targets use `_bfd_generic_final_link', which does not
 # support STB_GNU_UNIQUE symbol binding causing assertion failures.
 #
@@ -201,7 +200,6 @@ proc supports_gnu_unique {} {
     if { [istarget "am33_2.0-*-*"]
 	 || [istarget "d30v-*-*"]
 	 || [istarget "dlx-*-*"]
-	 || [istarget "i960-*-*"]
 	 || [istarget "pj*-*-*"] } {
 	return 0
     }
diff --git a/gas/ChangeLog b/gas/ChangeLog
index f7dc5e5..894ad7d 100644
--- a/gas/ChangeLog
+++ b/gas/ChangeLog
@@ -1,3 +1,121 @@
+2018-04-11  Alan Modra  <amodra@gmail.com>
+
+	* config/aout_gnu.h: Delete.
+	* config/tc-i860.c: Delete.
+	* config/tc-i860.h: Delete.
+	* config/tc-i960.c: Delete.
+	* config/tc-i960.h: Delete.
+	* doc/c-i860.texi: Delete.
+	* doc/c-i960.texi: Delete.
+	* testsuite/gas/i860/README.i860: Delete.
+	* testsuite/gas/i860/bitwise.d: Delete.
+	* testsuite/gas/i860/bitwise.s: Delete.
+	* testsuite/gas/i860/branch.d: Delete.
+	* testsuite/gas/i860/branch.s: Delete.
+	* testsuite/gas/i860/bte.d: Delete.
+	* testsuite/gas/i860/bte.s: Delete.
+	* testsuite/gas/i860/dir-align01.d: Delete.
+	* testsuite/gas/i860/dir-align01.s: Delete.
+	* testsuite/gas/i860/dir-intel01.d: Delete.
+	* testsuite/gas/i860/dir-intel01.s: Delete.
+	* testsuite/gas/i860/dir-intel02.d: Delete.
+	* testsuite/gas/i860/dir-intel02.s: Delete.
+	* testsuite/gas/i860/dir-intel03-err.l: Delete.
+	* testsuite/gas/i860/dir-intel03-err.s: Delete.
+	* testsuite/gas/i860/dual01.d: Delete.
+	* testsuite/gas/i860/dual01.s: Delete.
+	* testsuite/gas/i860/dual02-err.l: Delete.
+	* testsuite/gas/i860/dual02-err.s: Delete.
+	* testsuite/gas/i860/dual03.d: Delete.
+	* testsuite/gas/i860/dual03.s: Delete.
+	* testsuite/gas/i860/fldst01.d: Delete.
+	* testsuite/gas/i860/fldst01.s: Delete.
+	* testsuite/gas/i860/fldst02.d: Delete.
+	* testsuite/gas/i860/fldst02.s: Delete.
+	* testsuite/gas/i860/fldst03.d: Delete.
+	* testsuite/gas/i860/fldst03.s: Delete.
+	* testsuite/gas/i860/fldst04.d: Delete.
+	* testsuite/gas/i860/fldst04.s: Delete.
+	* testsuite/gas/i860/fldst05.d: Delete.
+	* testsuite/gas/i860/fldst05.s: Delete.
+	* testsuite/gas/i860/fldst06.d: Delete.
+	* testsuite/gas/i860/fldst06.s: Delete.
+	* testsuite/gas/i860/fldst07.d: Delete.
+	* testsuite/gas/i860/fldst07.s: Delete.
+	* testsuite/gas/i860/fldst08.d: Delete.
+	* testsuite/gas/i860/fldst08.s: Delete.
+	* testsuite/gas/i860/float01.d: Delete.
+	* testsuite/gas/i860/float01.s: Delete.
+	* testsuite/gas/i860/float02.d: Delete.
+	* testsuite/gas/i860/float02.s: Delete.
+	* testsuite/gas/i860/float03.d: Delete.
+	* testsuite/gas/i860/float03.s: Delete.
+	* testsuite/gas/i860/float04.d: Delete.
+	* testsuite/gas/i860/float04.s: Delete.
+	* testsuite/gas/i860/form.d: Delete.
+	* testsuite/gas/i860/form.s: Delete.
+	* testsuite/gas/i860/i860.exp: Delete.
+	* testsuite/gas/i860/iarith.d: Delete.
+	* testsuite/gas/i860/iarith.s: Delete.
+	* testsuite/gas/i860/ldst01.d: Delete.
+	* testsuite/gas/i860/ldst01.s: Delete.
+	* testsuite/gas/i860/ldst02.d: Delete.
+	* testsuite/gas/i860/ldst02.s: Delete.
+	* testsuite/gas/i860/ldst03.d: Delete.
+	* testsuite/gas/i860/ldst03.s: Delete.
+	* testsuite/gas/i860/ldst04.d: Delete.
+	* testsuite/gas/i860/ldst04.s: Delete.
+	* testsuite/gas/i860/ldst05.d: Delete.
+	* testsuite/gas/i860/ldst05.s: Delete.
+	* testsuite/gas/i860/ldst06.d: Delete.
+	* testsuite/gas/i860/ldst06.s: Delete.
+	* testsuite/gas/i860/pfam.d: Delete.
+	* testsuite/gas/i860/pfam.s: Delete.
+	* testsuite/gas/i860/pfmam.d: Delete.
+	* testsuite/gas/i860/pfmam.s: Delete.
+	* testsuite/gas/i860/pfmsm.d: Delete.
+	* testsuite/gas/i860/pfmsm.s: Delete.
+	* testsuite/gas/i860/pfsm.d: Delete.
+	* testsuite/gas/i860/pfsm.s: Delete.
+	* testsuite/gas/i860/pseudo-ops01.d: Delete.
+	* testsuite/gas/i860/pseudo-ops01.s: Delete.
+	* testsuite/gas/i860/regress01.d: Delete.
+	* testsuite/gas/i860/regress01.s: Delete.
+	* testsuite/gas/i860/shift.d: Delete.
+	* testsuite/gas/i860/shift.s: Delete.
+	* testsuite/gas/i860/simd.d: Delete.
+	* testsuite/gas/i860/simd.s: Delete.
+	* testsuite/gas/i860/system.d: Delete.
+	* testsuite/gas/i860/system.s: Delete.
+	* testsuite/gas/i860/xp.d: Delete.
+	* testsuite/gas/i860/xp.s: Delete.
+	* Makefile.am: Remove i860 and i960 support.
+	* configure.tgt: Likewise.
+	* doc/Makefile.am: Likewise.
+	* doc/all.texi: Likewise.
+	* testsuite/gas/all/gas.exp
+	* config/obj-coff.h: Remove i960 support.
+	* doc/internals.texi: Likewise.
+	* expr.c: Likewise.
+	* read.c: Likewise.
+	* write.c: Likewise.
+	* write.h: Likewise.
+	* testsuite/gas/lns/lns.exp: Likewise.
+	* testsuite/gas/symver/symver.exp: Likewise.
+	* config/tc-m68k.c: Remove BOUT support.
+	* config/tc-score.c: Likewise.
+	* config/tc-score7.c: Likewise.
+	* config/tc-sparc.c: Likewise.
+	* symbols.c: Likewise.
+	* doc/h8.texi: Likewise.
+	* configure.ac: Remove BOUT and i860 support.
+	* doc/as.texinfo: Remove BOUT, i860 and i960 support
+	* Makefile.in: Regenerate.
+	* config.in: Regenerate.
+	* configure: Regenerate.
+	* doc/Makefile.in: Regenerate.
+	* po/POTFILES.in: Regenerate.
+
 2018-04-05  H.J. Lu  <hongjiu.lu@intel.com>
 
 	PR gas/22318
diff --git a/gas/Makefile.am b/gas/Makefile.am
index 5aa68f3..3b0dd03 100644
--- a/gas/Makefile.am
+++ b/gas/Makefile.am
@@ -150,8 +150,6 @@ TARGET_CPU_CFILES = \
 	config/tc-ia64.c \
 	config/tc-i370.c \
 	config/tc-i386.c \
-	config/tc-i860.c \
-	config/tc-i960.c \
 	config/tc-ip2k.c \
 	config/tc-iq2000.c \
 	config/tc-lm32.c \
@@ -227,8 +225,6 @@ TARGET_CPU_HFILES = \
 	config/tc-ia64.h \
 	config/tc-i370.h \
 	config/tc-i386.h \
-	config/tc-i860.h \
-	config/tc-i960.h \
 	config/tc-ip2k.h \
 	config/tc-iq2000.h \
 	config/tc-lm32.h \
diff --git a/gas/Makefile.in b/gas/Makefile.in
index 51e96e5..8968b1e 100644
--- a/gas/Makefile.in
+++ b/gas/Makefile.in
@@ -446,8 +446,6 @@ TARGET_CPU_CFILES = \
 	config/tc-ia64.c \
 	config/tc-i370.c \
 	config/tc-i386.c \
-	config/tc-i860.c \
-	config/tc-i960.c \
 	config/tc-ip2k.c \
 	config/tc-iq2000.c \
 	config/tc-lm32.c \
@@ -523,8 +521,6 @@ TARGET_CPU_HFILES = \
 	config/tc-ia64.h \
 	config/tc-i370.h \
 	config/tc-i386.h \
-	config/tc-i860.h \
-	config/tc-i960.h \
 	config/tc-ip2k.h \
 	config/tc-iq2000.h \
 	config/tc-lm32.h \
@@ -882,8 +878,6 @@ distclean-compile:
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tc-hppa.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tc-i370.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tc-i386.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tc-i860.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tc-i960.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tc-ia64.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tc-ip2k.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tc-iq2000.Po@am__quote@
@@ -1255,34 +1249,6 @@ tc-i386.obj: config/tc-i386.c
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o tc-i386.obj `if test -f 'config/tc-i386.c'; then $(CYGPATH_W) 'config/tc-i386.c'; else $(CYGPATH_W) '$(srcdir)/config/tc-i386.c'; fi`
 
-tc-i860.o: config/tc-i860.c
-@am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT tc-i860.o -MD -MP -MF $(DEPDIR)/tc-i860.Tpo -c -o tc-i860.o `test -f 'config/tc-i860.c' || echo '$(srcdir)/'`config/tc-i860.c
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/tc-i860.Tpo $(DEPDIR)/tc-i860.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='config/tc-i860.c' object='tc-i860.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o tc-i860.o `test -f 'config/tc-i860.c' || echo '$(srcdir)/'`config/tc-i860.c
-
-tc-i860.obj: config/tc-i860.c
-@am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT tc-i860.obj -MD -MP -MF $(DEPDIR)/tc-i860.Tpo -c -o tc-i860.obj `if test -f 'config/tc-i860.c'; then $(CYGPATH_W) 'config/tc-i860.c'; else $(CYGPATH_W) '$(srcdir)/config/tc-i860.c'; fi`
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/tc-i860.Tpo $(DEPDIR)/tc-i860.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='config/tc-i860.c' object='tc-i860.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o tc-i860.obj `if test -f 'config/tc-i860.c'; then $(CYGPATH_W) 'config/tc-i860.c'; else $(CYGPATH_W) '$(srcdir)/config/tc-i860.c'; fi`
-
-tc-i960.o: config/tc-i960.c
-@am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT tc-i960.o -MD -MP -MF $(DEPDIR)/tc-i960.Tpo -c -o tc-i960.o `test -f 'config/tc-i960.c' || echo '$(srcdir)/'`config/tc-i960.c
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/tc-i960.Tpo $(DEPDIR)/tc-i960.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='config/tc-i960.c' object='tc-i960.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o tc-i960.o `test -f 'config/tc-i960.c' || echo '$(srcdir)/'`config/tc-i960.c
-
-tc-i960.obj: config/tc-i960.c
-@am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT tc-i960.obj -MD -MP -MF $(DEPDIR)/tc-i960.Tpo -c -o tc-i960.obj `if test -f 'config/tc-i960.c'; then $(CYGPATH_W) 'config/tc-i960.c'; else $(CYGPATH_W) '$(srcdir)/config/tc-i960.c'; fi`
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/tc-i960.Tpo $(DEPDIR)/tc-i960.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='config/tc-i960.c' object='tc-i960.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o tc-i960.obj `if test -f 'config/tc-i960.c'; then $(CYGPATH_W) 'config/tc-i960.c'; else $(CYGPATH_W) '$(srcdir)/config/tc-i960.c'; fi`
-
 tc-ip2k.o: config/tc-ip2k.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT tc-ip2k.o -MD -MP -MF $(DEPDIR)/tc-ip2k.Tpo -c -o tc-ip2k.o `test -f 'config/tc-ip2k.c' || echo '$(srcdir)/'`config/tc-ip2k.c
 @am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/tc-ip2k.Tpo $(DEPDIR)/tc-ip2k.Po
diff --git a/gas/config.in b/gas/config.in
index 0855179..76c7c17 100644
--- a/gas/config.in
+++ b/gas/config.in
@@ -238,9 +238,6 @@
 /* a.out support? */
 #undef OBJ_MAYBE_AOUT
 
-/* b.out support? */
-#undef OBJ_MAYBE_BOUT
-
 /* COFF support? */
 #undef OBJ_MAYBE_COFF
 
diff --git a/gas/config/aout_gnu.h b/gas/config/aout_gnu.h
deleted file mode 100644
index f404d1e..0000000
--- a/gas/config/aout_gnu.h
+++ /dev/null
@@ -1,451 +0,0 @@
-/* This file is aout_gnu.h
-
-   Copyright (C) 1987-2018 Free Software Foundation, Inc.
-
-   This file is part of GAS, the GNU Assembler.
-
-   GAS is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 3, or (at your option)
-   any later version.
-
-   GAS is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with GAS; see the file COPYING.  If not, write to
-   the Free Software Foundation, 51 Franklin Street - Fifth Floor,
-   Boston, MA 02110-1301, USA.  */
-
-#ifndef __A_OUT_GNU_H__
-#define __A_OUT_GNU_H__
-
-/* There are two main flavours of a.out, one which uses the standard
-   relocations, and one which uses extended relocations.
-
-   Today, the extended reloc uses are
-   TC_SPARC
-
-   each must define the enum reloc_type
-
-*/
-
-#if defined(TC_SPARC)
-enum reloc_type
-  {
-    RELOC_8, RELOC_16, RELOC_32,/* simple relocations */
-    RELOC_DISP8, RELOC_DISP16, RELOC_DISP32,	/* pc-rel displacement */
-    RELOC_WDISP30, RELOC_WDISP22,
-    RELOC_HI22, RELOC_22,
-    RELOC_13, RELOC_LO10,
-    RELOC_SFA_BASE, RELOC_SFA_OFF13,
-    RELOC_BASE10, RELOC_BASE13, RELOC_BASE22,	/* P.I.C. (base-relative) */
-    RELOC_PC10, RELOC_PC22,	/* for some sort of pc-rel P.I.C. (?) */
-    RELOC_JMP_TBL,		/* P.I.C. jump table */
-    RELOC_SEGOFF16,		/* reputedly for shared libraries somehow */
-    RELOC_GLOB_DAT, RELOC_JMP_SLOT, RELOC_RELATIVE,
-    RELOC_10, RELOC_11,
-    RELOC_WDISP2_14,
-    RELOC_WDISP19,
-    RELOC_HHI22,
-    RELOC_HLO10,
-
-    /* 29K relocation types */
-    RELOC_JUMPTARG, RELOC_CONST, RELOC_CONSTH,
-
-    RELOC_WDISP14, RELOC_WDISP21,
-
-    NO_RELOC
-  };
-
-#define USE_EXTENDED_RELOC 1
-#else
-#define USE_EXTENDED_RELOC 0
-#endif /* TC_SPARC */
-
-#define __GNU_EXEC_MACROS__
-
-#ifndef __STRUCT_EXEC_OVERRIDE__
-
-/* This is the layout on disk of a Unix V7, Berkeley, SunOS, Vax Ultrix
-   "struct exec".  Don't assume that on this machine, the "struct exec"
-   will lay out the same sizes or alignments.  */
-
-struct exec_bytes
-  {
-    unsigned char a_info[4];
-    unsigned char a_text[4];
-    unsigned char a_data[4];
-    unsigned char a_bss[4];
-    unsigned char a_syms[4];
-    unsigned char a_entry[4];
-    unsigned char a_trsize[4];
-    unsigned char a_drsize[4];
-  };
-
-/* How big the "struct exec" is on disk */
-#define	EXEC_BYTES_SIZE	(8 * 4)
-
-/* This is the layout in memory of a "struct exec" while we process it.  */
-
-struct exec
-{
-  unsigned long a_info;		/* Use macros N_MAGIC, etc for access */
-  unsigned a_text;		/* length of text, in bytes */
-  unsigned a_data;		/* length of data, in bytes */
-  unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
-  unsigned a_syms;		/* length of symbol table data in file, in bytes */
-  unsigned a_entry;		/* start address */
-  unsigned a_trsize;		/* length of relocation info for text, in bytes */
-  unsigned a_drsize;		/* length of relocation info for data, in bytes */
-};
-
-#endif /* __STRUCT_EXEC_OVERRIDE__ */
-
-/* these go in the N_MACHTYPE field */
-/* These symbols could be defined by code from Suns...punt 'em */
-#undef M_UNKNOWN
-#undef M_68010
-#undef M_68020
-#undef M_SPARC
-enum machine_type
-  {
-    M_UNKNOWN = 0,
-    M_68010 = 1,
-    M_68020 = 2,
-    M_SPARC = 3,
-    /* skip a bunch so we don't run into any of sun's numbers */
-    M_386 = 100,
-    M_29K = 101,
-    M_RS6000 = 102,		/* IBM RS/6000 */
-    M_VAX4K_NETBSD = 150,
-    /* HP/BSD formats */
-    M_HP200 = 200,		/* hp200 (68010) BSD binary */
-    M_HP300 = 300,		/* hp300 (68020+68881) BSD binary */
-    M_HPUX23 = 0x020C		/* hp200/300 HPUX binary */
-  };
-
-#define N_MAGIC(execp) ((execp)->a_info & 0xffff)
-#define N_MACHTYPE(execp) ((enum machine_type)(((execp)->a_info >> 16) & 0xff))
-#define N_FLAGS(execp) (((execp)->a_info >> 24) & 0xff)
-#define N_SET_INFO(execp, magic, type, flags) \
-    ((execp)->a_info = ((magic) & 0xffff) \
-     | (((int)(type) & 0xff) << 16) \
-     | (((flags) & 0xff) << 24))
-#define N_SET_MAGIC(execp, magic) \
-    ((execp)->a_info = (((execp)->a_info & 0xffff0000) | ((magic) & 0xffff)))
-
-#define N_SET_MACHTYPE(execp, machtype) \
-    ((execp)->a_info = \
-     ((execp)->a_info & 0xff00ffff) | ((((int) (machtype)) & 0xff) << 16))
-
-#define N_SET_FLAGS(execp, flags) \
-    ((execp)->a_info = \
-     ((execp)->a_info & 0x00ffffff) | (((flags) & 0xff) << 24))
-
-/* Code indicating object file or impure executable.  */
-#ifndef OMAGIC
-#define OMAGIC 0407
-#endif
-/* Code indicating pure executable.  */
-#define NMAGIC 0410
-/* Code indicating demand-paged executable.  */
-#define ZMAGIC 0413
-
-/* Virtual Address of text segment from the a.out file.  For OMAGIC,
-   (almost always "unlinked .o's" these days), should be zero.
-   For linked files, should reflect reality if we know it.  */
-
-#ifndef N_TXTADDR
-#define N_TXTADDR(x)	(N_MAGIC(x)==OMAGIC? 0 : TEXT_START_ADDR)
-#endif
-
-#ifndef N_BADMAG
-#define N_BADMAG(x)	  (N_MAGIC(x) != OMAGIC		\
-			   && N_MAGIC(x) != NMAGIC		\
-			   && N_MAGIC(x) != ZMAGIC)
-#endif
-
-/* By default, segment size is constant.  But on some machines, it can
-   be a function of the a.out header (e.g. machine type).  */
-#ifndef	N_SEGSIZE
-#define	N_SEGSIZE(x)	SEGMENT_SIZE
-#endif
-
-/* This complexity is for encapsulated COFF support */
-#ifndef _N_HDROFF
-#define _N_HDROFF(x)	(N_SEGSIZE(x) - sizeof (struct exec))
-#endif
-
-#ifndef N_TXTOFF
-#define N_TXTOFF(x)	(N_MAGIC(x) == ZMAGIC ?	\
-			 _N_HDROFF((x)) + sizeof (struct exec) :	\
-			 sizeof (struct exec))
-#endif
-
-#ifndef N_DATOFF
-#define N_DATOFF(x)	( N_TXTOFF(x) + (x)->a_text )
-#endif
-
-#ifndef N_TRELOFF
-#define N_TRELOFF(x)	( N_DATOFF(x) + (x)->a_data )
-#endif
-
-#ifndef N_DRELOFF
-#define N_DRELOFF(x)	( N_TRELOFF(x) + (x)->a_trsize )
-#endif
-
-#ifndef N_SYMOFF
-#define N_SYMOFF(x)	( N_DRELOFF(x) + (x)->a_drsize )
-#endif
-
-#ifndef N_STROFF
-#define N_STROFF(x)	( N_SYMOFF(x) + (x)->a_syms )
-#endif
-
-/* Address of text segment in memory after it is loaded.  */
-#ifndef N_TXTADDR
-#define	N_TXTADDR(x)	0
-#endif
-
-#ifndef N_DATADDR
-#define N_DATADDR(x) \
-    (N_MAGIC(x)==OMAGIC? (N_TXTADDR(x)+(x)->a_text) \
-     :  (N_SEGSIZE(x) + ((N_TXTADDR(x)+(x)->a_text-1) & ~(N_SEGSIZE(x)-1))))
-#endif
-
-/* Address of bss segment in memory after it is loaded.  */
-#define N_BSSADDR(x) (N_DATADDR(x) + (x)->a_data)
-
-struct nlist
-  {
-    union
-      {
-	char *n_name;
-	struct nlist *n_next;
-	long n_strx;
-      }
-    n_un;
-    unsigned char n_type;
-    char n_other;
-    short n_desc;
-    unsigned long n_value;
-  };
-
-#define N_UNDF 0
-#define N_ABS 2
-#define N_TEXT 4
-#define N_DATA 6
-#define N_BSS 8
-#define	N_COMM	0x12		/* common (visible in shared lib commons) */
-#define N_FN 0x1F		/* File name of a .o file */
-
-/* Note: N_EXT can only usefully be OR-ed with N_UNDF, N_ABS, N_TEXT,
-   N_DATA, or N_BSS.  When the low-order bit of other types is set,
-   (e.g. N_WARNING versus N_FN), they are two different types.  */
-#define N_EXT 1
-#define N_TYPE 036
-#define N_STAB 0340
-
-/* The following type indicates the definition of a symbol as being
-   an indirect reference to another symbol.  The other symbol
-   appears as an undefined reference, immediately following this symbol.
-
-   Indirection is asymmetrical.  The other symbol's value will be used
-   to satisfy requests for the indirect symbol, but not vice versa.
-   If the other symbol does not have a definition, libraries will
-   be searched to find a definition.  */
-
-#define N_INDR 0xa
-
-/* The following symbols refer to set elements.
-   All the N_SET[ATDB] symbols with the same name form one set.
-   Space is allocated for the set in the text section, and each set
-   element's value is stored into one word of the space.
-   The first word of the space is the length of the set (number of elements).
-
-   The address of the set is made into an N_SETV symbol
-   whose name is the same as the name of the set.
-   This symbol acts like a N_DATA global symbol
-   in that it can satisfy undefined external references.  */
-
-/* These appear as input to LD, in a .o file.  */
-#define	N_SETA	0x14		/* Absolute set element symbol */
-#define	N_SETT	0x16		/* Text set element symbol */
-#define	N_SETD	0x18		/* Data set element symbol */
-#define	N_SETB	0x1A		/* Bss set element symbol */
-
-/* This is output from LD.  */
-#define N_SETV	0x1C		/* Pointer to set vector in data area.  */
-
-/* Warning symbol. The text gives a warning message, the next symbol
-   in the table will be undefined. When the symbol is referenced, the
-   message is printed.  */
-
-#define	N_WARNING 0x1e
-
-/* Weak symbols.  These are a GNU extension to the a.out format.  The
-   semantics are those of ELF weak symbols.  Weak symbols are always
-   externally visible.  The N_WEAK? values are squeezed into the
-   available slots.  The value of a N_WEAKU symbol is 0.  The values
-   of the other types are the definitions.  */
-#define N_WEAKU	0x0d		/* Weak undefined symbol.  */
-#define N_WEAKA 0x0e		/* Weak absolute symbol.  */
-#define N_WEAKT 0x0f		/* Weak text symbol.  */
-#define N_WEAKD 0x10		/* Weak data symbol.  */
-#define N_WEAKB 0x11		/* Weak bss symbol.  */
-
-/* This structure describes a single relocation to be performed.
-   The text-relocation section of the file is a vector of these structures,
-   all of which apply to the text section.
-   Likewise, the data-relocation section applies to the data section.  */
-
-/* The following enum and struct were borrowed from SunOS's
-   /usr/include/sun4/a.out.h  and extended to handle
-   other machines.  It is currently used on SPARC.
-
-   reloc_ext_bytes is how it looks on disk.  reloc_info_extended is
-   how we might process it on a native host.  */
-#if USE_EXTENDED_RELOC
-
-struct reloc_ext_bytes
-  {
-    unsigned char r_address[4];
-    unsigned char r_index[3];
-    unsigned char r_bits[1];
-    unsigned char r_addend[4];
-  };
-
-#define	RELOC_EXT_BITS_EXTERN_BIG	0x80
-#define	RELOC_EXT_BITS_EXTERN_LITTLE	0x01
-
-#define	RELOC_EXT_BITS_TYPE_BIG		0x1F
-#define	RELOC_EXT_BITS_TYPE_SH_BIG	0
-#define	RELOC_EXT_BITS_TYPE_LITTLE	0xF8
-#define	RELOC_EXT_BITS_TYPE_SH_LITTLE	3
-
-#define	RELOC_EXT_SIZE	12	/* Bytes per relocation entry */
-
-struct reloc_info_extended
-{
-  unsigned long r_address;
-  unsigned int r_index:24;
-# define	r_symbolnum  r_index
-  unsigned r_extern:1;
-  unsigned:2;
-  /*  RS/6000 compiler does not support enum bitfield
-	    enum reloc_type r_type:5; */
-  enum reloc_type r_type;
-  long int r_addend;
-};
-
-#else
-
-/* The standard, old-fashioned, Berkeley compatible relocation struct */
-
-#ifdef TC_I860
-/* NOTE: three bits max, see struct reloc_info_i860.r_type */
-enum i860_reloc_type
-  {
-    NO_RELOC = 0, BRADDR, LOW0, LOW1, LOW2, LOW3, LOW4, SPLIT0, SPLIT1, SPLIT2, RELOC_32,
-  };
-
-typedef enum i860_reloc_type reloc_type;
-
-/* NOTE: two bits max, see reloc_info_i860.r_type */
-enum highlow_type
-  {
-    NO_SPEC = 0, PAIR, HIGH, HIGHADJ,
-  };
-
-struct reloc_info_i860
-{
-  unsigned long r_address;
-  /*
-	 * Using bit fields here is a bad idea because the order is not portable. :-(
-	 */
-  unsigned int r_symbolnum:24;
-  unsigned int r_pcrel:1;
-  unsigned int r_extern:1;
-  /* combining the two field simplifies the argument passing in "new_fix()" */
-  /* and is compatible with the existing Sparc #ifdef's */
-  /* r_type:  highlow_type - bits 5,4; reloc_type - bits 3-0 */
-  unsigned int r_type:6;
-  long r_addend;
-};
-
-#endif /* TC_I860 */
-
-struct reloc_std_bytes
-  {
-    unsigned char r_address[4];
-    unsigned char r_index[3];
-    unsigned char r_bits[1];
-  };
-
-#define	RELOC_STD_BITS_PCREL_BIG	0x80
-#define	RELOC_STD_BITS_PCREL_LITTLE	0x01
-
-#define	RELOC_STD_BITS_LENGTH_BIG	0x60
-#define	RELOC_STD_BITS_LENGTH_SH_BIG	5	/* To shift to units place */
-#define	RELOC_STD_BITS_LENGTH_LITTLE	0x06
-#define	RELOC_STD_BITS_LENGTH_SH_LITTLE	1
-
-#define	RELOC_STD_BITS_EXTERN_BIG	0x10
-#define	RELOC_STD_BITS_EXTERN_LITTLE	0x08
-
-#define	RELOC_STD_BITS_BASEREL_BIG	0x08
-#define	RELOC_STD_BITS_BASEREL_LITTLE	0x08
-
-#define	RELOC_STD_BITS_JMPTABLE_BIG	0x04
-#define	RELOC_STD_BITS_JMPTABLE_LITTLE	0x04
-
-#define	RELOC_STD_BITS_RELATIVE_BIG	0x02
-#define	RELOC_STD_BITS_RELATIVE_LITTLE	0x02
-
-#define	RELOC_STD_SIZE	8	/* Bytes per relocation entry */
-
-#endif /* USE_EXTENDED_RELOC */
-
-#ifndef CUSTOM_RELOC_FORMAT
-struct relocation_info
-{
-  /* Address (within segment) to be relocated.  */
-  int r_address;
-  /* The meaning of r_symbolnum depends on r_extern.  */
-  unsigned int r_symbolnum:24;
-  /* Nonzero means value is a pc-relative offset
-	   and it should be relocated for changes in its own address
-	   as well as for changes in the symbol or section specified.  */
-  unsigned int r_pcrel:1;
-  /* Length (as exponent of 2) of the field to be relocated.
-	   Thus, a value of 2 indicates 1<<2 bytes.  */
-  unsigned int r_length:2;
-  /* 1 => relocate with value of symbol.
-	   r_symbolnum is the index of the symbol
-	   in file's the symbol table.
-	   0 => relocate with the address of a segment.
-	   r_symbolnum is N_TEXT, N_DATA, N_BSS or N_ABS
-	   (the N_EXT bit may be set also, but signifies nothing).  */
-  unsigned int r_extern:1;
-  /* The next three bits are for SunOS shared libraries, and seem to
-	   be undocumented.  */
-#ifdef TC_NS32K
-  unsigned int r_bsr:1;
-  unsigned int r_disp:2;
-#else
-  unsigned int r_baserel:1;	/* Linkage table relative */
-  unsigned int r_jmptable:1;	/* pc-relative to jump table */
-  unsigned int r_relative:1;	/* "relative relocation" */
-#endif /* TC_NS32K */
-  /* unused */
-  unsigned int r_pad:1;		/* Padding -- set to zero */
-};
-
-#endif /* CUSTOM_RELOC_FORMAT */
-
-#endif /* __A_OUT_GNU_H__ */
-
-/* end of aout_gnu.h */
diff --git a/gas/config/obj-coff.h b/gas/config/obj-coff.h
index 7c4fff5..ee28ab4 100644
--- a/gas/config/obj-coff.h
+++ b/gas/config/obj-coff.h
@@ -75,11 +75,6 @@
 #endif
 #endif
 
-#ifdef TC_I960
-#include "coff/i960.h"
-#define TARGET_FORMAT "coff-Intel-little"
-#endif
-
 #ifdef TC_Z80
 #include "coff/z80.h"
 #define TARGET_FORMAT "coff-z80"
@@ -168,11 +163,6 @@
 
 /* Alter the field names, for now, until we've fixed up the other
    references to use the new name.  */
-#ifdef TC_I960
-#define TC_SYMFIELD_TYPE	symbolS *
-#define sy_tc			bal
-#endif
-
 #define OBJ_SYMFIELD_TYPE	unsigned long
 #define sy_obj			sy_obj_flags
 
@@ -224,17 +214,7 @@
 
 /* Internal use only definitions. SF_ stands for symbol flags.
 
-   These values can be assigned to sy_symbol.ost_flags field of a symbolS.
-
-   You'll break i960 if you shift the SYSPROC bits anywhere else.  for
-   more on the balname/callname hack, see tc-i960.h.  b.out is done
-   differently.  */
-
-#define SF_I960_MASK	0x000001ff	/* Bits 0-8 are used by the i960 port.  */
-#define SF_SYSPROC	0x0000003f	/* bits 0-5 are used to store the sysproc number.  */
-#define SF_IS_SYSPROC	0x00000040	/* bit 6 marks symbols that are sysprocs.  */
-#define SF_BALNAME	0x00000080	/* bit 7 marks BALNAME symbols.  */
-#define SF_CALLNAME	0x00000100	/* bit 8 marks CALLNAME symbols.  */
+   These values can be assigned to sy_symbol.ost_flags field of a symbolS.  */
 
 #define SF_NORMAL_MASK	0x0000ffff	/* bits 12-15 are general purpose.  */
 
@@ -269,11 +249,6 @@
 #define SF_GET_TAGGED(s)	(SF_GET (s) & SF_TAGGED)
 #define SF_GET_TAG(s)		(SF_GET (s) & SF_TAG)
 #define SF_GET_GET_SEGMENT(s)	(SF_GET (s) & SF_GET_SEGMENT)
-#define SF_GET_I960(s)		(SF_GET (s) & SF_I960_MASK)	/* Used by i960.  */
-#define SF_GET_BALNAME(s)	(SF_GET (s) & SF_BALNAME)	/* Used by i960.  */
-#define SF_GET_CALLNAME(s)	(SF_GET (s) & SF_CALLNAME)	/* Used by i960.  */
-#define SF_GET_IS_SYSPROC(s)	(SF_GET (s) & SF_IS_SYSPROC)	/* Used by i960.  */
-#define SF_GET_SYSPROC(s)	(SF_GET (s) & SF_SYSPROC)	/* Used by i960.  */
 
 /* Modifiers.  */
 #define SF_SET(s,v)		(SF_GET (s) = (v))
@@ -290,11 +265,6 @@
 #define SF_SET_TAGGED(s)	(SF_GET (s) |= SF_TAGGED)
 #define SF_SET_TAG(s)		(SF_GET (s) |= SF_TAG)
 #define SF_SET_GET_SEGMENT(s)	(SF_GET (s) |= SF_GET_SEGMENT)
-#define SF_SET_I960(s,v)	(SF_GET (s) |= ((v) & SF_I960_MASK))	/* Used by i960.  */
-#define SF_SET_BALNAME(s)	(SF_GET (s) |= SF_BALNAME)		/* Used by i960.  */
-#define SF_SET_CALLNAME(s)	(SF_GET (s) |= SF_CALLNAME)		/* Used by i960.  */
-#define SF_SET_IS_SYSPROC(s)	(SF_GET (s) |= SF_IS_SYSPROC)		/* Used by i960.  */
-#define SF_SET_SYSPROC(s,v)	(SF_GET (s) |= ((v) & SF_SYSPROC))	/* Used by i960.  */
 
 
 /*  Line number handling.  */
@@ -330,12 +300,6 @@ extern symbolS *coff_last_function;
 
 /* Sanity check.  */
 
-#ifdef TC_I960
-#ifndef C_LEAFSTAT
-hey ! Where is the C_LEAFSTAT definition ? i960 - coff support is depending on it.
-#endif /* no C_LEAFSTAT */
-#endif /* TC_I960 */
-
 extern const pseudo_typeS coff_pseudo_table[];
 
 #ifndef obj_pop_insert
diff --git a/gas/config/tc-i860.c b/gas/config/tc-i860.c
deleted file mode 100644
index 5872678..0000000
--- a/gas/config/tc-i860.c
+++ /dev/null
@@ -1,1491 +0,0 @@
-/* tc-i860.c -- Assembler for the Intel i860 architecture.
-   Copyright (C) 1989-2018 Free Software Foundation, Inc.
-
-   Brought back from the dead and completely reworked
-   by Jason Eckhardt <jle@cygnus.com>.
-
-   This file is part of GAS, the GNU Assembler.
-
-   GAS is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 3, or (at your option)
-   any later version.
-
-   GAS is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License along
-   with GAS; see the file COPYING.  If not, write to the Free Software
-   Foundation, 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.  */
-
-#include "as.h"
-#include "safe-ctype.h"
-#include "subsegs.h"
-#include "opcode/i860.h"
-#include "elf/i860.h"
-
-
-/* The opcode hash table.  */
-static struct hash_control *op_hash = NULL;
-
-/* These characters always start a comment.  */
-const char comment_chars[] = "#!/";
-
-/* These characters start a comment at the beginning of a line.  */
-const char line_comment_chars[] = "#/";
-
-const char line_separator_chars[] = ";";
-
-/* Characters that can be used to separate the mantissa from the exponent
-   in floating point numbers.  */
-const char EXP_CHARS[] = "eE";
-
-/* Characters that indicate this number is a floating point constant.
-   As in 0f12.456 or 0d1.2345e12.  */
-const char FLT_CHARS[] = "rRsSfFdDxXpP";
-
-/* Register prefix (depends on syntax).  */
-static char reg_prefix;
-
-#define MAX_FIXUPS 2
-
-struct i860_it
-{
-  const char *error;
-  unsigned long opcode;
-  enum expand_type expand;
-  struct i860_fi
-  {
-    expressionS exp;
-    bfd_reloc_code_real_type reloc;
-    int pcrel;
-    valueT fup;
-  } fi[MAX_FIXUPS];
-} the_insn;
-
-/* The current fixup count.  */
-static int fc;
-
-static char *expr_end;
-
-/* Indicates error if a pseudo operation was expanded after a branch.  */
-static char last_expand;
-
-/* If true, then warn if any pseudo operations were expanded.  */
-static int target_warn_expand = 0;
-
-/* If true, then XP support is enabled.  */
-static int target_xp = 0;
-
-/* If true, then Intel syntax is enabled (default to AT&T/SVR4 syntax).  */
-static int target_intel_syntax = 0;
-
-
-/* Prototypes.  */
-static void i860_process_insn (char *);
-static void s_dual (int);
-static void s_enddual (int);
-static void s_atmp (int);
-static void s_align_wrapper (int);
-static int i860_get_expression (char *);
-static bfd_reloc_code_real_type obtain_reloc_for_imm16 (fixS *, long *);
-#ifdef DEBUG_I860
-static void print_insn (struct i860_it *);
-#endif
-
-const pseudo_typeS md_pseudo_table[] =
-{
-  {"align",   s_align_wrapper, 0},
-  {"dual",    s_dual,          0},
-  {"enddual", s_enddual,       0},
-  {"atmp",    s_atmp,          0},
-  {NULL,      0,               0},
-};
-
-/* Dual-instruction mode handling.  */
-enum dual
-{
-  DUAL_OFF = 0, DUAL_ON, DUAL_DDOT, DUAL_ONDDOT,
-};
-static enum dual dual_mode = DUAL_OFF;
-
-/* Handle ".dual" directive.  */
-static void
-s_dual (int ignore ATTRIBUTE_UNUSED)
-{
-  if (target_intel_syntax)
-    dual_mode = DUAL_ON;
-  else
-    as_bad (_("Directive .dual available only with -mintel-syntax option"));
-}
-
-/* Handle ".enddual" directive.  */
-static void
-s_enddual (int ignore ATTRIBUTE_UNUSED)
-{
-  if (target_intel_syntax)
-    dual_mode = DUAL_OFF;
-  else
-    as_bad (_("Directive .enddual available only with -mintel-syntax option"));
-}
-
-/* Temporary register used when expanding assembler pseudo operations.  */
-static int atmp = 31;
-
-static void
-s_atmp (int ignore ATTRIBUTE_UNUSED)
-{
-  int temp;
-
-  if (! target_intel_syntax)
-    {
-      as_bad (_("Directive .atmp available only with -mintel-syntax option"));
-      demand_empty_rest_of_line ();
-      return;
-    }
-
-  if (strncmp (input_line_pointer, "sp", 2) == 0)
-    {
-      input_line_pointer += 2;
-      atmp = 2;
-    }
-  else if (strncmp (input_line_pointer, "fp", 2) == 0)
-    {
-      input_line_pointer += 2;
-      atmp = 3;
-    }
-  else if (strncmp (input_line_pointer, "r", 1) == 0)
-    {
-      input_line_pointer += 1;
-      temp = get_absolute_expression ();
-      if (temp >= 0 && temp <= 31)
-	atmp = temp;
-      else
-	as_bad (_("Unknown temporary pseudo register"));
-    }
-  else
-    {
-      as_bad (_("Unknown temporary pseudo register"));
-    }
-  demand_empty_rest_of_line ();
-}
-
-/* Handle ".align" directive depending on syntax mode.
-   AT&T/SVR4 syntax uses the standard align directive.  However,
-   the Intel syntax additionally allows keywords for the alignment
-   parameter: ".align type", where type is one of {.short, .long,
-   .quad, .single, .double} representing alignments of 2, 4,
-   16, 4, and 8, respectively.  */
-static void
-s_align_wrapper (int arg)
-{
-  char *parm = input_line_pointer;
-
-  if (target_intel_syntax)
-    {
-      /* Replace a keyword with the equivalent integer so the
-         standard align routine can parse the directive.  */
-      if (strncmp (parm, ".short", 6) == 0)
-        strncpy (parm, "     2", 6);
-      else if (strncmp (parm, ".long", 5) == 0)
-        strncpy (parm, "    4", 5);
-      else if (strncmp (parm, ".quad", 5) == 0)
-        strncpy (parm, "   16", 5);
-      else if (strncmp (parm, ".single", 7) == 0)
-        strncpy (parm, "      4", 7);
-      else if (strncmp (parm, ".double", 7) == 0)
-        strncpy (parm, "      8", 7);
-
-      while (*input_line_pointer == ' ')
-        ++input_line_pointer;
-    }
-
-  s_align_bytes (arg);
-}
-
-/* This function is called once, at assembler startup time.  It should
-   set up all the tables and data structures that the MD part of the
-   assembler will need.  */
-void
-md_begin (void)
-{
-  const char *retval = NULL;
-  int lose = 0;
-  unsigned int i = 0;
-
-  op_hash = hash_new ();
-
-  while (i860_opcodes[i].name != NULL)
-    {
-      const char *name = i860_opcodes[i].name;
-      retval = hash_insert (op_hash, name, (void *) &i860_opcodes[i]);
-      if (retval != NULL)
-	{
-	  fprintf (stderr, _("internal error: can't hash `%s': %s\n"),
-		   i860_opcodes[i].name, retval);
-	  lose = 1;
-	}
-      do
-	{
-	  if (i860_opcodes[i].match & i860_opcodes[i].lose)
-	    {
-	      fprintf (stderr,
-		       _("internal error: losing opcode: `%s' \"%s\"\n"),
-		       i860_opcodes[i].name, i860_opcodes[i].args);
-	      lose = 1;
-	    }
-	  ++i;
-	}
-      while (i860_opcodes[i].name != NULL
-	     && strcmp (i860_opcodes[i].name, name) == 0);
-    }
-
-  if (lose)
-    as_fatal (_("Defective assembler.  No assembly attempted."));
-
-  /* Set the register prefix for either Intel or AT&T/SVR4 syntax.  */
-  reg_prefix = target_intel_syntax ? 0 : '%';
-}
-
-/* This is the core of the machine-dependent assembler.  STR points to a
-   machine dependent instruction.  This function emits the frags/bytes
-   it assembles to.  */
-void
-md_assemble (char *str)
-{
-  char *destp;
-  int num_opcodes = 1;
-  int i;
-  struct i860_it pseudo[3];
-
-  gas_assert (str);
-  fc = 0;
-
-  /* Assemble the instruction.  */
-  i860_process_insn (str);
-
-  /* Check for expandable flag to produce pseudo-instructions.  This
-     is an undesirable feature that should be avoided.  */
-  if (the_insn.expand != 0 && the_insn.expand != XP_ONLY
-      && ! (the_insn.fi[0].fup & (OP_SEL_HA | OP_SEL_H | OP_SEL_L | OP_SEL_GOT
-			    | OP_SEL_GOTOFF | OP_SEL_PLT)))
-    {
-      for (i = 0; i < 3; i++)
-	pseudo[i] = the_insn;
-
-      fc = 1;
-      switch (the_insn.expand)
-	{
-
-	case E_DELAY:
-	  num_opcodes = 1;
-	  break;
-
-	case E_MOV:
-	  if (the_insn.fi[0].exp.X_add_symbol == NULL
-	      && the_insn.fi[0].exp.X_op_symbol == NULL
-	      && (the_insn.fi[0].exp.X_add_number < (1 << 15)
-		  && the_insn.fi[0].exp.X_add_number >= -(1 << 15)))
-	    break;
-
-	  /* Emit "or l%const,r0,ireg_dest".  */
-	  pseudo[0].opcode = (the_insn.opcode & 0x001f0000) | 0xe4000000;
-	  pseudo[0].fi[0].fup = (OP_IMM_S16 | OP_SEL_L);
-
-	  /* Emit "orh h%const,ireg_dest,ireg_dest".  */
-	  pseudo[1].opcode = (the_insn.opcode & 0x03ffffff) | 0xec000000
-			      | ((the_insn.opcode & 0x001f0000) << 5);
-	  pseudo[1].fi[0].fup = (OP_IMM_S16 | OP_SEL_H);
-
-	  num_opcodes = 2;
-	  break;
-
-	case E_ADDR:
-	  if (the_insn.fi[0].exp.X_add_symbol == NULL
-	      && the_insn.fi[0].exp.X_op_symbol == NULL
-	      && (the_insn.fi[0].exp.X_add_number < (1 << 15)
-		  && the_insn.fi[0].exp.X_add_number >= -(1 << 15)))
-	    break;
-
-	  /* Emit "orh ha%addr_expr,ireg_src2,r31".  */
-	  pseudo[0].opcode = 0xec000000 | (the_insn.opcode & 0x03e00000)
-			     | (atmp << 16);
-	  pseudo[0].fi[0].fup = (OP_IMM_S16 | OP_SEL_HA);
-
-	  /* Emit "l%addr_expr(r31),ireg_dest".  We pick up the fixup
-	     information from the original instruction.   */
-	  pseudo[1].opcode = (the_insn.opcode & ~0x03e00000) | (atmp << 21);
-	  pseudo[1].fi[0].fup = the_insn.fi[0].fup | OP_SEL_L;
-
-	  num_opcodes = 2;
-	  break;
-
-	case E_U32:
-	  if (the_insn.fi[0].exp.X_add_symbol == NULL
-	      && the_insn.fi[0].exp.X_op_symbol == NULL
-	      && (the_insn.fi[0].exp.X_add_number < (1 << 16)
-		  && the_insn.fi[0].exp.X_add_number >= 0))
-	    break;
-
-	  /* Emit "$(opcode)h h%const,ireg_src2,r31".  */
-	  pseudo[0].opcode = (the_insn.opcode & 0xf3e0ffff) | 0x0c000000
-			      | (atmp << 16);
-	  pseudo[0].fi[0].fup = (OP_IMM_S16 | OP_SEL_H);
-
-	  /* Emit "$(opcode) l%const,r31,ireg_dest".  */
-	  pseudo[1].opcode = (the_insn.opcode & 0xf01f0000) | 0x04000000
-			      | (atmp << 21);
-	  pseudo[1].fi[0].fup = (OP_IMM_S16 | OP_SEL_L);
-
-	  num_opcodes = 2;
-	  break;
-
-	case E_AND:
-	  if (the_insn.fi[0].exp.X_add_symbol == NULL
-	      && the_insn.fi[0].exp.X_op_symbol == NULL
-	      && (the_insn.fi[0].exp.X_add_number < (1 << 16)
-		  && the_insn.fi[0].exp.X_add_number >= 0))
-	    break;
-
-	  /* Emit "andnot h%const,ireg_src2,r31".  */
-	  pseudo[0].opcode = (the_insn.opcode & 0x03e0ffff) | 0xd4000000
-			      | (atmp << 16);
-	  pseudo[0].fi[0].fup = (OP_IMM_S16 | OP_SEL_H);
-	  pseudo[0].fi[0].exp.X_add_number =
-            -1 - the_insn.fi[0].exp.X_add_number;
-
-	  /* Emit "andnot l%const,r31,ireg_dest".  */
-	  pseudo[1].opcode = (the_insn.opcode & 0x001f0000) | 0xd4000000
-			      | (atmp << 21);
-	  pseudo[1].fi[0].fup = (OP_IMM_S16 | OP_SEL_L);
-	  pseudo[1].fi[0].exp.X_add_number =
-            -1 - the_insn.fi[0].exp.X_add_number;
-
-	  num_opcodes = 2;
-	  break;
-
-	case E_S32:
-	  if (the_insn.fi[0].exp.X_add_symbol == NULL
-	      && the_insn.fi[0].exp.X_op_symbol == NULL
-	      && (the_insn.fi[0].exp.X_add_number < (1 << 15)
-		  && the_insn.fi[0].exp.X_add_number >= -(1 << 15)))
-	    break;
-
-	  /* Emit "orh h%const,r0,r31".  */
-	  pseudo[0].opcode = 0xec000000 | (atmp << 16);
-	  pseudo[0].fi[0].fup = (OP_IMM_S16 | OP_SEL_H);
-
-	  /* Emit "or l%const,r31,r31".  */
-	  pseudo[1].opcode = 0xe4000000 | (atmp << 21) | (atmp << 16);
-	  pseudo[1].fi[0].fup = (OP_IMM_S16 | OP_SEL_L);
-
-	  /* Emit "r31,ireg_src2,ireg_dest".  */
-	  pseudo[2].opcode = (the_insn.opcode & ~0x0400ffff) | (atmp << 11);
-	  pseudo[2].fi[0].fup = OP_IMM_S16;
-
-	  num_opcodes = 3;
-	  break;
-
-	default:
-	  as_fatal (_("failed sanity check."));
-	}
-
-      the_insn = pseudo[0];
-
-      /* Warn if an opcode is expanded after a delayed branch.  */
-      if (num_opcodes > 1 && last_expand == 1)
-	as_warn (_("Expanded opcode after delayed branch: `%s'"), str);
-
-      /* Warn if an opcode is expanded in dual mode.  */
-      if (num_opcodes > 1 && dual_mode != DUAL_OFF)
-	as_warn (_("Expanded opcode in dual mode: `%s'"), str);
-
-      /* Notify if any expansions happen.  */
-      if (target_warn_expand && num_opcodes > 1)
-	as_warn (_("An instruction was expanded (%s)"), str);
-    }
-
-  dwarf2_emit_insn (0);
-  i = 0;
-  do
-    {
-      int tmp;
-
-      /* Output the opcode.  Note that the i860 always reads instructions
-	 as little-endian data.  */
-      destp = frag_more (4);
-      number_to_chars_littleendian (destp, the_insn.opcode, 4);
-
-      /* Check for expanded opcode after branch or in dual mode.  */
-      last_expand = the_insn.fi[0].pcrel;
-
-      /* Output the symbol-dependent stuff.  Only btne and bte will ever
-         loop more than once here, since only they (possibly) have more
-         than one fixup.  */
-      for (tmp = 0; tmp < fc; tmp++)
-        {
-          if (the_insn.fi[tmp].fup != OP_NONE)
-	    {
-	      fixS *fix;
-	      fix = fix_new_exp (frag_now,
-			         destp - frag_now->fr_literal,
-			         4,
-			         &the_insn.fi[tmp].exp,
-			         the_insn.fi[tmp].pcrel,
-			         the_insn.fi[tmp].reloc);
-
-	     /* Despite the odd name, this is a scratch field.  We use
-	        it to encode operand type information.  */
-	     fix->fx_addnumber = the_insn.fi[tmp].fup;
-	   }
-        }
-      the_insn = pseudo[++i];
-    }
-  while (--num_opcodes > 0);
-
-}
-
-/* Assemble the instruction pointed to by STR.  */
-static void
-i860_process_insn (char *str)
-{
-  char *s;
-  const char *args;
-  char c;
-  struct i860_opcode *insn;
-  char *args_start;
-  unsigned long opcode;
-  unsigned int mask;
-  int match = 0;
-  int comma = 0;
-
-#if 1 /* For compiler warnings.  */
-  args = 0;
-  insn = 0;
-  args_start = 0;
-  opcode = 0;
-#endif
-
-  for (s = str; ISLOWER (*s) || *s == '.' || *s == '3'
-       || *s == '2' || *s == '1'; ++s)
-    ;
-
-  switch (*s)
-    {
-    case '\0':
-      break;
-
-    case ',':
-      comma = 1;
-
-      /*FALLTHROUGH*/
-
-    case ' ':
-      *s++ = '\0';
-      break;
-
-    default:
-      as_fatal (_("Unknown opcode: `%s'"), str);
-    }
-
-  /* Check for dual mode ("d.") opcode prefix.  */
-  if (strncmp (str, "d.", 2) == 0)
-    {
-      if (dual_mode == DUAL_ON)
-	dual_mode = DUAL_ONDDOT;
-      else
-	dual_mode = DUAL_DDOT;
-      str += 2;
-    }
-
-  if ((insn = (struct i860_opcode *) hash_find (op_hash, str)) == NULL)
-    {
-      if (dual_mode == DUAL_DDOT || dual_mode == DUAL_ONDDOT)
-	str -= 2;
-      as_bad (_("Unknown opcode: `%s'"), str);
-      return;
-    }
-
-  if (comma)
-    *--s = ',';
-
-  args_start = s;
-  for (;;)
-    {
-      int t;
-      opcode = insn->match;
-      memset (&the_insn, '\0', sizeof (the_insn));
-      fc = 0;
-      for (t = 0; t < MAX_FIXUPS; t++)
-        {
-          the_insn.fi[t].reloc = BFD_RELOC_NONE;
-          the_insn.fi[t].pcrel = 0;
-          the_insn.fi[t].fup = OP_NONE;
-        }
-
-      /* Build the opcode, checking as we go that the operands match.  */
-      for (args = insn->args; ; ++args)
-	{
-          if (fc > MAX_FIXUPS)
-            abort ();
-
-	  switch (*args)
-	    {
-
-	    /* End of args.  */
-	    case '\0':
-	      if (*s == '\0')
-		match = 1;
-	      break;
-
-	    /* These must match exactly.  */
-	    case '+':
-	    case '(':
-	    case ')':
-	    case ',':
-	    case ' ':
-	      if (*s++ == *args)
-		continue;
-	      break;
-
-	    /* Must be at least one digit.  */
-	    case '#':
-	      if (ISDIGIT (*s++))
-		{
-		  while (ISDIGIT (*s))
-		    ++s;
-		  continue;
-		}
-	      break;
-
-	    /* Next operand must be a register.  */
-	    case '1':
-	    case '2':
-	    case 'd':
-	      /* Check for register prefix if necessary.  */
-	      if (reg_prefix && *s != reg_prefix)
-		goto error;
-	      else if (reg_prefix)
-		s++;
-
-	      switch (*s)
-		{
-		/* Frame pointer.  */
-		case 'f':
-		  s++;
-		  if (*s++ == 'p')
-		    {
-		      mask = 0x3;
-		      break;
-		    }
-		  goto error;
-
-		/* Stack pointer.  */
-		case 's':
-		  s++;
-		  if (*s++ == 'p')
-		    {
-		      mask = 0x2;
-		      break;
-		    }
-		  goto error;
-
-		/* Any register r0..r31.  */
-		case 'r':
-		  s++;
-		  if (!ISDIGIT (c = *s++))
-		    {
-		      goto error;
-		    }
-		  if (ISDIGIT (*s))
-		    {
-		      if ((c = 10 * (c - '0') + (*s++ - '0')) >= 32)
-			goto error;
-		    }
-		  else
-		    c -= '0';
-		  mask = c;
-		  break;
-
-		/* Not this opcode.  */
-		default:
-		  goto error;
-		}
-
-	      /* Obtained the register, now place it in the opcode.  */
-	      switch (*args)
-		{
-		case '1':
-		  opcode |= mask << 11;
-		  continue;
-
-		case '2':
-		  opcode |= mask << 21;
-		  continue;
-
-		case 'd':
-		  opcode |= mask << 16;
-		  continue;
-
-		}
-	      break;
-
-	    /* Next operand is a floating point register.  */
-	    case 'e':
-	    case 'f':
-	    case 'g':
-	      /* Check for register prefix if necessary.  */
-	      if (reg_prefix && *s != reg_prefix)
-		goto error;
-	      else if (reg_prefix)
-		s++;
-
-	      if (*s++ == 'f' && ISDIGIT (*s))
-		{
-		  mask = *s++;
-		  if (ISDIGIT (*s))
-		    {
-		      mask = 10 * (mask - '0') + (*s++ - '0');
-		      if (mask >= 32)
-			{
-			  break;
-			}
-		    }
-		  else
-		    mask -= '0';
-
-		  switch (*args)
-		    {
-
-		    case 'e':
-		      opcode |= mask << 11;
-		      continue;
-
-		    case 'f':
-		      opcode |= mask << 21;
-		      continue;
-
-		    case 'g':
-		      opcode |= mask << 16;
-		      if ((opcode & (1 << 10)) && mask != 0
-			  && (mask == ((opcode >> 11) & 0x1f)))
-			as_warn (_("Pipelined instruction: fsrc1 = fdest"));
-		      continue;
-		    }
-		}
-	      break;
-
-	    /* Next operand must be a control register.  */
-	    case 'c':
-	      /* Check for register prefix if necessary.  */
-	      if (reg_prefix && *s != reg_prefix)
-		goto error;
-	      else if (reg_prefix)
-		s++;
-
-	      if (strncmp (s, "fir", 3) == 0)
-		{
-		  opcode |= 0x0 << 21;
-		  s += 3;
-		  continue;
-		}
-	      if (strncmp (s, "psr", 3) == 0)
-		{
-		  opcode |= 0x1 << 21;
-		  s += 3;
-		  continue;
-		}
-	      if (strncmp (s, "dirbase", 7) == 0)
-		{
-		  opcode |= 0x2 << 21;
-		  s += 7;
-		  continue;
-		}
-	      if (strncmp (s, "db", 2) == 0)
-		{
-		  opcode |= 0x3 << 21;
-		  s += 2;
-		  continue;
-		}
-	      if (strncmp (s, "fsr", 3) == 0)
-		{
-		  opcode |= 0x4 << 21;
-		  s += 3;
-		  continue;
-		}
-	      if (strncmp (s, "epsr", 4) == 0)
-		{
-		  opcode |= 0x5 << 21;
-		  s += 4;
-		  continue;
-		}
-	      /* The remaining control registers are XP only.  */
-	      if (target_xp && strncmp (s, "bear", 4) == 0)
-		{
-		  opcode |= 0x6 << 21;
-		  s += 4;
-		  continue;
-		}
-	      if (target_xp && strncmp (s, "ccr", 3) == 0)
-		{
-		  opcode |= 0x7 << 21;
-		  s += 3;
-		  continue;
-		}
-	      if (target_xp && strncmp (s, "p0", 2) == 0)
-		{
-		  opcode |= 0x8 << 21;
-		  s += 2;
-		  continue;
-		}
-	      if (target_xp && strncmp (s, "p1", 2) == 0)
-		{
-		  opcode |= 0x9 << 21;
-		  s += 2;
-		  continue;
-		}
-	      if (target_xp && strncmp (s, "p2", 2) == 0)
-		{
-		  opcode |= 0xa << 21;
-		  s += 2;
-		  continue;
-		}
-	      if (target_xp && strncmp (s, "p3", 2) == 0)
-		{
-		  opcode |= 0xb << 21;
-		  s += 2;
-		  continue;
-		}
-	      break;
-
-	    /* 5-bit immediate in src1.  */
-	    case '5':
-	      if (! i860_get_expression (s))
-		{
-		  s = expr_end;
-		  the_insn.fi[fc].fup |= OP_IMM_U5;
-		  fc++;
-		  continue;
-		}
-	      break;
-
-	    /* 26-bit immediate, relative branch (lbroff).  */
-	    case 'l':
-	      the_insn.fi[fc].pcrel = 1;
-	      the_insn.fi[fc].fup |= OP_IMM_BR26;
-	      goto immediate;
-
-	    /* 16-bit split immediate, relative branch (sbroff).  */
-	    case 'r':
-	      the_insn.fi[fc].pcrel = 1;
-	      the_insn.fi[fc].fup |= OP_IMM_BR16;
-	      goto immediate;
-
-	    /* 16-bit split immediate.  */
-	    case 's':
-	      the_insn.fi[fc].fup |= OP_IMM_SPLIT16;
-	      goto immediate;
-
-	    /* 16-bit split immediate, byte aligned (st.b).  */
-	    case 'S':
-	      the_insn.fi[fc].fup |= OP_IMM_SPLIT16;
-	      goto immediate;
-
-	    /* 16-bit split immediate, half-word aligned (st.s).  */
-	    case 'T':
-	      the_insn.fi[fc].fup |= (OP_IMM_SPLIT16 | OP_ENCODE1 | OP_ALIGN2);
-	      goto immediate;
-
-	    /* 16-bit split immediate, word aligned (st.l).  */
-	    case 'U':
-	      the_insn.fi[fc].fup |= (OP_IMM_SPLIT16 | OP_ENCODE1 | OP_ALIGN4);
-	      goto immediate;
-
-	    /* 16-bit immediate.  */
-	    case 'i':
-	      the_insn.fi[fc].fup |= OP_IMM_S16;
-	      goto immediate;
-
-	    /* 16-bit immediate, byte aligned (ld.b).  */
-	    case 'I':
-	      the_insn.fi[fc].fup |= OP_IMM_S16;
-	      goto immediate;
-
-	    /* 16-bit immediate, half-word aligned (ld.s).  */
-	    case 'J':
-	      the_insn.fi[fc].fup |= (OP_IMM_S16 | OP_ENCODE1 | OP_ALIGN2);
-	      goto immediate;
-
-	    /* 16-bit immediate, word aligned (ld.l, {p}fld.l, fst.l).  */
-	    case 'K':
-	      if (insn->name[0] == 'l')
-		the_insn.fi[fc].fup |= (OP_IMM_S16 | OP_ENCODE1 | OP_ALIGN4);
-	      else
-		the_insn.fi[fc].fup |= (OP_IMM_S16 | OP_ENCODE2 | OP_ALIGN4);
-	      goto immediate;
-
-	    /* 16-bit immediate, double-word aligned ({p}fld.d, fst.d).  */
-	    case 'L':
-	      the_insn.fi[fc].fup |= (OP_IMM_S16 | OP_ENCODE3 | OP_ALIGN8);
-	      goto immediate;
-
-	    /* 16-bit immediate, quad-word aligned (fld.q, fst.q).  */
-	    case 'M':
-	      the_insn.fi[fc].fup |= (OP_IMM_S16 | OP_ENCODE3 | OP_ALIGN16);
-
-	      /*FALLTHROUGH*/
-
-	      /* Handle the immediate for either the Intel syntax or
-		 SVR4 syntax. The Intel syntax is "ha%immediate"
-		 whereas SVR4 syntax is "[immediate]@ha".  */
-	    immediate:
-	      if (target_intel_syntax == 0)
-		{
-		  /* AT&T/SVR4 syntax.  */
-	          if (*s == ' ')
-		    s++;
-
-	          /* Note that if i860_get_expression() fails, we will still
-	  	     have created U entries in the symbol table for the
-		     'symbols' in the input string.  Try not to create U
-		     symbols for registers, etc.  */
-	          if (! i860_get_expression (s))
-		    s = expr_end;
-	          else
-		    goto error;
-
-	          if (strncmp (s, "@ha", 3) == 0)
-		    {
-		      the_insn.fi[fc].fup |= OP_SEL_HA;
-		      s += 3;
-		    }
-	          else if (strncmp (s, "@h", 2) == 0)
-		    {
-		      the_insn.fi[fc].fup |= OP_SEL_H;
-		      s += 2;
-		    }
-	          else if (strncmp (s, "@l", 2) == 0)
-		    {
-		      the_insn.fi[fc].fup |= OP_SEL_L;
-		      s += 2;
-		    }
-	          else if (strncmp (s, "@gotoff", 7) == 0
-		           || strncmp (s, "@GOTOFF", 7) == 0)
-		    {
-		      as_bad (_("Assembler does not yet support PIC"));
-		      the_insn.fi[fc].fup |= OP_SEL_GOTOFF;
-		      s += 7;
-		    }
-	          else if (strncmp (s, "@got", 4) == 0
-		           || strncmp (s, "@GOT", 4) == 0)
-		    {
-		      as_bad (_("Assembler does not yet support PIC"));
-		      the_insn.fi[fc].fup |= OP_SEL_GOT;
-		      s += 4;
-		    }
-	          else if (strncmp (s, "@plt", 4) == 0
-		           || strncmp (s, "@PLT", 4) == 0)
-		    {
-		      as_bad (_("Assembler does not yet support PIC"));
-		      the_insn.fi[fc].fup |= OP_SEL_PLT;
-		      s += 4;
-		    }
-
-	          the_insn.expand = insn->expand;
-                  fc++;
-
-	          continue;
-		}
-	      else
-		{
-		  /* Intel syntax.  */
-	          if (*s == ' ')
-		    s++;
-	          if (strncmp (s, "ha%", 3) == 0)
-		    {
-		      the_insn.fi[fc].fup |= OP_SEL_HA;
-		      s += 3;
-		    }
-	          else if (strncmp (s, "h%", 2) == 0)
-		    {
-		      the_insn.fi[fc].fup |= OP_SEL_H;
-		      s += 2;
-		    }
-	          else if (strncmp (s, "l%", 2) == 0)
-		    {
-		      the_insn.fi[fc].fup |= OP_SEL_L;
-		      s += 2;
-		    }
-	          the_insn.expand = insn->expand;
-
-	          /* Note that if i860_get_expression() fails, we will still
-		     have created U entries in the symbol table for the
-		     'symbols' in the input string.  Try not to create U
-		     symbols for registers, etc.  */
-	          if (! i860_get_expression (s))
-		    s = expr_end;
-	          else
-		    goto error;
-
-                  fc++;
-	          continue;
-		}
-	      break;
-
-	    default:
-	      as_fatal (_("failed sanity check."));
-	    }
-	  break;
-	}
-    error:
-      if (match == 0)
-	{
-	  /* Args don't match.  */
-	  if (insn[1].name != NULL
-	      && ! strcmp (insn->name, insn[1].name))
-	    {
-	      ++insn;
-	      s = args_start;
-	      continue;
-	    }
-	  else
-	    {
-	      as_bad (_("Illegal operands for %s"), insn->name);
-	      return;
-	    }
-	}
-      break;
-    }
-
-  /* Set the dual bit on this instruction if necessary.  */
-  if (dual_mode != DUAL_OFF)
-    {
-      if ((opcode & 0xfc000000) == 0x48000000 || opcode == 0xb0000000)
-        {
-	  /* The instruction is a flop or a fnop, so set its dual bit
-	     (but check that it is 8-byte aligned).  */
-	  if (((frag_now->fr_address + frag_now_fix_octets ()) & 7) == 0)
-	    opcode |= (1 << 9);
-	  else
-            as_bad (_("'d.%s' must be 8-byte aligned"), insn->name);
-
-          if (dual_mode == DUAL_DDOT)
-	    dual_mode = DUAL_OFF;
-          else if (dual_mode == DUAL_ONDDOT)
-	    dual_mode = DUAL_ON;
-        }
-      else if (dual_mode == DUAL_DDOT || dual_mode == DUAL_ONDDOT)
-        as_bad (_("Prefix 'd.' invalid for instruction `%s'"), insn->name);
-    }
-
-  the_insn.opcode = opcode;
-
-  /* Only recognize XP instructions when the user has requested it.  */
-  if (insn->expand == XP_ONLY && ! target_xp)
-    as_bad (_("Unknown opcode: `%s'"), insn->name);
-}
-
-static int
-i860_get_expression (char *str)
-{
-  char *save_in;
-  segT seg;
-
-  save_in = input_line_pointer;
-  input_line_pointer = str;
-  seg = expression (&the_insn.fi[fc].exp);
-  if (seg != absolute_section
-      && seg != undefined_section
-      && ! SEG_NORMAL (seg))
-    {
-      the_insn.error = _("bad segment");
-      expr_end = input_line_pointer;
-      input_line_pointer = save_in;
-      return 1;
-    }
-  expr_end = input_line_pointer;
-  input_line_pointer = save_in;
-  return 0;
-}
-
-const char *
-md_atof (int type, char *litP, int *sizeP)
-{
-  return ieee_md_atof (type, litP, sizeP, TRUE);
-}
-
-/* Write out in current endian mode.  */
-void
-md_number_to_chars (char *buf, valueT val, int n)
-{
-  if (target_big_endian)
-    number_to_chars_bigendian (buf, val, n);
-  else
-    number_to_chars_littleendian (buf, val, n);
-}
-
-/* This should never be called for i860.  */
-int
-md_estimate_size_before_relax (fragS *fragP ATTRIBUTE_UNUSED,
-			       segT segtype ATTRIBUTE_UNUSED)
-{
-  as_fatal (_("relaxation not supported\n"));
-}
-
-#ifdef DEBUG_I860
-static void
-print_insn (struct i860_it *insn)
-{
-  if (insn->error)
-    fprintf (stderr, "ERROR: %s\n", insn->error);
-
-  fprintf (stderr, "opcode = 0x%08lx\t", insn->opcode);
-  fprintf (stderr, "expand = 0x%x\t", insn->expand);
-  fprintf (stderr, "reloc = %s\t\n",
-	   bfd_get_reloc_code_name (insn->reloc));
-  fprintf (stderr, "exp =  {\n");
-  fprintf (stderr, "\t\tX_add_symbol = %s\n",
-	   insn->exp.X_add_symbol ?
-	   (S_GET_NAME (insn->exp.X_add_symbol) ?
-	    S_GET_NAME (insn->exp.X_add_symbol) : "???") : "0");
-  fprintf (stderr, "\t\tX_op_symbol = %s\n",
-	   insn->exp.X_op_symbol ?
-	   (S_GET_NAME (insn->exp.X_op_symbol) ?
-	    S_GET_NAME (insn->exp.X_op_symbol) : "???") : "0");
-  fprintf (stderr, "\t\tX_add_number = %lx\n",
-	   insn->exp.X_add_number);
-  fprintf (stderr, "}\n");
-}
-#endif /* DEBUG_I860 */
-
-
-#ifdef OBJ_ELF
-const char *md_shortopts = "VQ:";
-#else
-const char *md_shortopts = "";
-#endif
-
-#define OPTION_EB		(OPTION_MD_BASE + 0)
-#define OPTION_EL		(OPTION_MD_BASE + 1)
-#define OPTION_WARN_EXPAND	(OPTION_MD_BASE + 2)
-#define OPTION_XP		(OPTION_MD_BASE + 3)
-#define OPTION_INTEL_SYNTAX	(OPTION_MD_BASE + 4)
-
-struct option md_longopts[] = {
-  { "EB",	    no_argument, NULL, OPTION_EB },
-  { "EL",	    no_argument, NULL, OPTION_EL },
-  { "mwarn-expand", no_argument, NULL, OPTION_WARN_EXPAND },
-  { "mxp",	    no_argument, NULL, OPTION_XP },
-  { "mintel-syntax",no_argument, NULL, OPTION_INTEL_SYNTAX },
-  { NULL,	    no_argument, NULL, 0 }
-};
-size_t md_longopts_size = sizeof (md_longopts);
-
-int
-md_parse_option (int c, const char *arg ATTRIBUTE_UNUSED)
-{
-  switch (c)
-    {
-    case OPTION_EB:
-      target_big_endian = 1;
-      break;
-
-    case OPTION_EL:
-      target_big_endian = 0;
-      break;
-
-    case OPTION_WARN_EXPAND:
-      target_warn_expand = 1;
-      break;
-
-    case OPTION_XP:
-      target_xp = 1;
-      break;
-
-    case OPTION_INTEL_SYNTAX:
-      target_intel_syntax = 1;
-      break;
-
-#ifdef OBJ_ELF
-    /* SVR4 argument compatibility (-V): print version ID.  */
-    case 'V':
-      print_version_id ();
-      break;
-
-    /* SVR4 argument compatibility (-Qy, -Qn): controls whether
-       a .comment section should be emitted or not (ignored).  */
-    case 'Q':
-      break;
-#endif
-
-    default:
-      return 0;
-    }
-
-  return 1;
-}
-
-void
-md_show_usage (FILE *stream)
-{
-  fprintf (stream, _("\
-  -EL			  generate code for little endian mode (default)\n\
-  -EB			  generate code for big endian mode\n\
-  -mwarn-expand		  warn if pseudo operations are expanded\n\
-  -mxp			  enable i860XP support (disabled by default)\n\
-  -mintel-syntax	  enable Intel syntax (default to AT&T/SVR4)\n"));
-#ifdef OBJ_ELF
-  /* SVR4 compatibility flags.  */
-  fprintf (stream, _("\
-  -V			  print assembler version number\n\
-  -Qy, -Qn		  ignored\n"));
-#endif
-}
-
-
-/* We have no need to default values of symbols.  */
-symbolS *
-md_undefined_symbol (char *name ATTRIBUTE_UNUSED)
-{
-  return 0;
-}
-
-/* The i860 denotes auto-increment with '++'.  */
-void
-md_operand (expressionS *exp)
-{
-  char *s;
-
-  for (s = input_line_pointer; *s; s++)
-    {
-      if (s[0] == '+' && s[1] == '+')
-	{
-	  input_line_pointer += 2;
-	  exp->X_op = O_register;
-	  break;
-	}
-    }
-}
-
-/* Round up a section size to the appropriate boundary.  */
-valueT
-md_section_align (segT segment ATTRIBUTE_UNUSED,
-		  valueT size ATTRIBUTE_UNUSED)
-{
-  /* Byte alignment is fine.  */
-  return size;
-}
-
-/* On the i860, a PC-relative offset is relative to the address of the
-   offset plus its size.  */
-long
-md_pcrel_from (fixS *fixP)
-{
-  return fixP->fx_size + fixP->fx_where + fixP->fx_frag->fr_address;
-}
-
-/* Determine the relocation needed for non PC-relative 16-bit immediates.
-   Also adjust the given immediate as necessary.  Finally, check that
-   all constraints (such as alignment) are satisfied.   */
-static bfd_reloc_code_real_type
-obtain_reloc_for_imm16 (fixS *fix, long *val)
-{
-  valueT fup = fix->fx_addnumber;
-  bfd_reloc_code_real_type reloc;
-
-  if (fix->fx_pcrel)
-    abort ();
-
-  /* Check alignment restrictions.  */
-  if ((fup & OP_ALIGN2) && (*val & 0x1))
-    as_bad_where (fix->fx_file, fix->fx_line,
-		  _("This immediate requires 0 MOD 2 alignment"));
-  else if ((fup & OP_ALIGN4) && (*val & 0x3))
-    as_bad_where (fix->fx_file, fix->fx_line,
-		  _("This immediate requires 0 MOD 4 alignment"));
-  else if ((fup & OP_ALIGN8) && (*val & 0x7))
-    as_bad_where (fix->fx_file, fix->fx_line,
-		  _("This immediate requires 0 MOD 8 alignment"));
-  else if ((fup & OP_ALIGN16) && (*val & 0xf))
-    as_bad_where (fix->fx_file, fix->fx_line,
-		  _("This immediate requires 0 MOD 16 alignment"));
-
-  if (fup & OP_SEL_HA)
-    {
-      *val = (*val >> 16) + (*val & 0x8000 ? 1 : 0);
-      reloc = BFD_RELOC_860_HIGHADJ;
-    }
-  else if (fup & OP_SEL_H)
-    {
-      *val >>= 16;
-      reloc = BFD_RELOC_860_HIGH;
-    }
-  else if (fup & OP_SEL_L)
-    {
-      int num_encode;
-      if (fup & OP_IMM_SPLIT16)
-	{
-	  if (fup & OP_ENCODE1)
-	    {
-	      num_encode = 1;
-	      reloc = BFD_RELOC_860_SPLIT1;
-	    }
-	  else if (fup & OP_ENCODE2)
-	    {
-	      num_encode = 2;
-	      reloc = BFD_RELOC_860_SPLIT2;
-	    }
-	  else
-	    {
-	      num_encode = 0;
-	      reloc = BFD_RELOC_860_SPLIT0;
-	    }
-	}
-      else
-	{
-	  if (fup & OP_ENCODE1)
-	    {
-	      num_encode = 1;
-	      reloc = BFD_RELOC_860_LOW1;
-	    }
-	  else if (fup & OP_ENCODE2)
-	    {
-	      num_encode = 2;
-	      reloc = BFD_RELOC_860_LOW2;
-	    }
-	  else if (fup & OP_ENCODE3)
-	    {
-	      num_encode = 3;
-	      reloc = BFD_RELOC_860_LOW3;
-	    }
-	  else
-	    {
-	      num_encode = 0;
-	      reloc = BFD_RELOC_860_LOW0;
-	    }
-	}
-
-      /* Preserve size encode bits.  */
-      *val &= ~((1 << num_encode) - 1);
-    }
-  else
-    {
-      /* No selector.  What reloc do we generate (???)?  */
-      reloc = BFD_RELOC_32;
-    }
-
-  return reloc;
-}
-
-/* Attempt to simplify or eliminate a fixup. To indicate that a fixup
-   has been eliminated, set fix->fx_done. If fix->fx_addsy is non-NULL,
-   we will have to generate a reloc entry.  */
-
-void
-md_apply_fix (fixS *fix, valueT *valP, segT seg ATTRIBUTE_UNUSED)
-{
-  char *buf;
-  long val = *valP;
-  unsigned long insn;
-  valueT fup;
-
-  buf = fix->fx_frag->fr_literal + fix->fx_where;
-
-  /* Recall that earlier we stored the opcode little-endian.  */
-  insn = bfd_getl32 (buf);
-
-  /* We stored a fix-up in this oddly-named scratch field.  */
-  fup = fix->fx_addnumber;
-
-  /* Determine the necessary relocations as well as inserting an
-     immediate into the instruction.   */
-  if (fup & OP_IMM_U5)
-    {
-      if (val & ~0x1f)
-	as_bad_where (fix->fx_file, fix->fx_line,
-		      _("5-bit immediate too large"));
-      if (fix->fx_addsy)
-	as_bad_where (fix->fx_file, fix->fx_line,
-		      _("5-bit field must be absolute"));
-
-      insn |= (val & 0x1f) << 11;
-      bfd_putl32 (insn, buf);
-      fix->fx_r_type = BFD_RELOC_NONE;
-      fix->fx_done = 1;
-    }
-  else if (fup & OP_IMM_S16)
-    {
-      fix->fx_r_type = obtain_reloc_for_imm16 (fix, &val);
-
-      /* Insert the immediate.  */
-      if (fix->fx_addsy)
-	fix->fx_done = 0;
-      else
-	{
-	  insn |= val & 0xffff;
-	  bfd_putl32 (insn, buf);
-	  fix->fx_r_type = BFD_RELOC_NONE;
-	  fix->fx_done = 1;
-	}
-    }
-  else if (fup & OP_IMM_U16)
-    abort ();
-
-  else if (fup & OP_IMM_SPLIT16)
-    {
-      fix->fx_r_type = obtain_reloc_for_imm16 (fix, &val);
-
-      /* Insert the immediate.  */
-      if (fix->fx_addsy)
-	fix->fx_done = 0;
-      else
-	{
-	  insn |= val & 0x7ff;
-	  insn |= (val & 0xf800) << 5;
-	  bfd_putl32 (insn, buf);
-	  fix->fx_r_type = BFD_RELOC_NONE;
-	  fix->fx_done = 1;
-	}
-    }
-  else if (fup & OP_IMM_BR16)
-    {
-      if (val & 0x3)
-	as_bad_where (fix->fx_file, fix->fx_line,
-		      _("A branch offset requires 0 MOD 4 alignment"));
-
-      val = val >> 2;
-
-      /* Insert the immediate.  */
-      if (fix->fx_addsy)
-	{
-	  fix->fx_done = 0;
-	  fix->fx_r_type = BFD_RELOC_860_PC16;
-	}
-      else
-	{
-	  insn |= (val & 0x7ff);
-	  insn |= ((val & 0xf800) << 5);
-	  bfd_putl32 (insn, buf);
-	  fix->fx_r_type = BFD_RELOC_NONE;
-	  fix->fx_done = 1;
-	}
-    }
-  else if (fup & OP_IMM_BR26)
-    {
-      if (val & 0x3)
-	as_bad_where (fix->fx_file, fix->fx_line,
-		      _("A branch offset requires 0 MOD 4 alignment"));
-
-      val >>= 2;
-
-      /* Insert the immediate.  */
-      if (fix->fx_addsy)
-	{
-	  fix->fx_r_type = BFD_RELOC_860_PC26;
-	  fix->fx_done = 0;
-	}
-      else
-	{
-	  insn |= (val & 0x3ffffff);
-	  bfd_putl32 (insn, buf);
-	  fix->fx_r_type = BFD_RELOC_NONE;
-	  fix->fx_done = 1;
-	}
-    }
-  else if (fup != OP_NONE)
-    {
-      as_bad_where (fix->fx_file, fix->fx_line,
-		    _("Unrecognized fix-up (0x%08lx)"), (unsigned long) fup);
-      abort ();
-    }
-  else
-    {
-      /* I believe only fix-ups such as ".long .ep.main-main+0xc8000000"
- 	 reach here (???).  */
-      if (fix->fx_addsy)
-	{
-	  fix->fx_r_type = BFD_RELOC_32;
-	  fix->fx_done = 0;
-	}
-      else
-	{
-	  insn |= (val & 0xffffffff);
-	  bfd_putl32 (insn, buf);
-	  fix->fx_r_type = BFD_RELOC_NONE;
-	  fix->fx_done = 1;
-	}
-    }
-}
-
-/* Generate a machine dependent reloc from a fixup.  */
-arelent*
-tc_gen_reloc (asection *section ATTRIBUTE_UNUSED,
-	      fixS *fixp)
-{
-  arelent *reloc;
-
-  reloc = XNEW (arelent);
-  reloc->sym_ptr_ptr = XNEW (asymbol *);
-  *reloc->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy);
-  reloc->address = fixp->fx_frag->fr_address + fixp->fx_where;
-  reloc->addend = fixp->fx_offset;
-  reloc->howto = bfd_reloc_type_lookup (stdoutput, fixp->fx_r_type);
-
-  if (! reloc->howto)
-    {
-      as_bad_where (fixp->fx_file, fixp->fx_line,
-                    "Cannot represent %s relocation in object file",
-                    bfd_get_reloc_code_name (fixp->fx_r_type));
-    }
-  return reloc;
-}
-
-/* This is called from HANDLE_ALIGN in write.c.  Fill in the contents
-   of an rs_align_code fragment.  */
-
-void
-i860_handle_align (fragS *fragp)
-{
-  /* Instructions are always stored little-endian on the i860.  */
-  static const unsigned char le_nop[] = { 0x00, 0x00, 0x00, 0xA0 };
-
-  int bytes;
-  char *p;
-
-  if (fragp->fr_type != rs_align_code)
-    return;
-
-  bytes = fragp->fr_next->fr_address - fragp->fr_address - fragp->fr_fix;
-  p = fragp->fr_literal + fragp->fr_fix;
-
-  /* Make sure we are on a 4-byte boundary, in case someone has been
-     putting data into a text section.  */
-  if (bytes & 3)
-    {
-      int fix = bytes & 3;
-      memset (p, 0, fix);
-      p += fix;
-      fragp->fr_fix += fix;
-    }
-
-  memcpy (p, le_nop, 4);
-  fragp->fr_var = 4;
-}
-
-/* This is called after a user-defined label is seen.  We check
-   if the label has a double colon (valid in Intel syntax mode only),
-   in which case it should be externalized.  */
-
-void
-i860_check_label (symbolS *labelsym)
-{
-  /* At this point, the current line pointer is sitting on the character
-     just after the first colon on the label.  */
-  if (target_intel_syntax && *input_line_pointer == ':')
-    {
-      S_SET_EXTERNAL (labelsym);
-      input_line_pointer++;
-    }
-}
diff --git a/gas/config/tc-i860.h b/gas/config/tc-i860.h
deleted file mode 100644
index a63f82f..0000000
--- a/gas/config/tc-i860.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/* tc-i860.h -- Header file for the i860.
-   Copyright (C) 1991-2018 Free Software Foundation, Inc.
-
-   Brought back from the dead and completely reworked
-   by Jason Eckhardt <jle@cygnus.com>.
-
-   This file is part of GAS, the GNU Assembler.
-
-   GAS is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 3, or (at your option)
-   any later version.
-
-   GAS is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License along
-   with GAS; see the file COPYING.  If not, write to the Free Software
-   Foundation, 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.  */
-
-#ifndef TC_I860
-#define TC_I860 1
-
-enum i860_fix_info
-{
-  OP_NONE	 = 0x00000,
-  OP_IMM_U5	 = 0x00001,
-  OP_IMM_S16	 = 0x00002,
-  OP_IMM_U16	 = 0x00004,
-  OP_IMM_SPLIT16 = 0x00008,
-  OP_IMM_BR26	 = 0x00010,
-  OP_IMM_BR16	 = 0x00020,
-  OP_ENCODE1	 = 0x00040,
-  OP_ENCODE2	 = 0x00080,
-  OP_ENCODE3	 = 0x00100,
-  OP_SEL_HA	 = 0x00200,
-  OP_SEL_H	 = 0x00400,
-  OP_SEL_L	 = 0x00800,
-  OP_SEL_GOT	 = 0x01000,
-  OP_SEL_GOTOFF	 = 0x02000,
-  OP_SEL_PLT	 = 0x04000,
-  OP_ALIGN2	 = 0x08000,
-  OP_ALIGN4	 = 0x10000,
-  OP_ALIGN8	 = 0x20000,
-  OP_ALIGN16	 = 0x40000
-};
-
-/* Set the endianness we are using.  Default to little endian.  */
-#ifndef TARGET_BYTES_BIG_ENDIAN
-#define TARGET_BYTES_BIG_ENDIAN 0
-#endif
-
-/* Whether or not the target is big endian.  */
-extern int target_big_endian;
-
-/* BFD target architecture.  */
-#define TARGET_ARCH     bfd_arch_i860
-
-/* The target BFD format.  */
-#ifdef OBJ_ELF
-#define TARGET_FORMAT (target_big_endian ? "elf32-i860" : "elf32-i860-little")
-#else
-#error i860 GAS currently supports only the ELF object format
-#endif
-
-#define WORKING_DOT_WORD
-#define DIFF_EXPR_OK
-
-/* Permit temporary numeric labels.  */
-#define LOCAL_LABELS_FB		1
-#define LISTING_HEADER		"GAS for i860"
-
-#define md_convert_frag(b,s,f)  abort ()
-
-/* Values passed to md_apply_fix don't include the symbol value.  */
-#define MD_APPLY_SYM_VALUE(FIX) 0
-
-/* No shared lib support, so we don't need to ensure externally
-   visible symbols can be overridden.  */
-#define EXTERN_FORCE_RELOC 0
-
-/* Bits for post-processing of a user defined label to check if
-   it has a double colon (Intel syntax only).  */
-extern void i860_check_label (symbolS *labelsym);
-#define tc_check_label(ls)	i860_check_label (ls)
-
-/* Bits for filling in rs_align_code fragments with NOPs.  */
-extern void i860_handle_align (struct frag *);
-#define HANDLE_ALIGN(fragp) i860_handle_align (fragp)
-
-#define MAX_MEM_FOR_RS_ALIGN_CODE  (3 + 4 + 4)
-
-#endif /* TC_I860 */
diff --git a/gas/config/tc-i960.c b/gas/config/tc-i960.c
deleted file mode 100644
index e6f7504..0000000
--- a/gas/config/tc-i960.c
+++ /dev/null
@@ -1,2667 +0,0 @@
-/* tc-i960.c - All the i80960-specific stuff
-   Copyright (C) 1989-2018 Free Software Foundation, Inc.
-
-   This file is part of GAS.
-
-   GAS is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 3, or (at your option)
-   any later version.
-
-   GAS is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with GAS; see the file COPYING.  If not, write to the Free
-   Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
-   02110-1301, USA.  */
-
-/* See comment on md_parse_option for 80960-specific invocation options.  */
-
-/* There are 4 different lengths of (potentially) symbol-based displacements
-   in the 80960 instruction set, each of which could require address fix-ups
-   and (in the case of external symbols) emission of relocation directives:
-
-   32-bit (MEMB)
-        This is a standard length for the base assembler and requires no
-        special action.
-
-   13-bit (COBR)
-        This is a non-standard length, but the base assembler has a
-        hook for bit field address fixups: the fixS structure can
-        point to a descriptor of the field, in which case our
-        md_number_to_field() routine gets called to process it.
-
-        I made the hook a little cleaner by having fix_new() (in the base
-        assembler) return a pointer to the fixS in question.  And I made it a
-        little simpler by storing the field size (in this case 13) instead of
-        of a pointer to another structure:  80960 displacements are ALWAYS
-        stored in the low-order bits of a 4-byte word.
-
-        Since the target of a COBR cannot be external, no relocation
-        directives for this size displacement have to be generated.
-        But the base assembler had to be modified to issue error
-        messages if the symbol did turn out to be external.
-
-   24-bit (CTRL)
-        Fixups are handled as for the 13-bit case (except that 24 is stored
-        in the fixS).
-
-        The relocation directive generated is the same as that for the 32-bit
-        displacement, except that it's PC-relative (the 32-bit displacement
-        never is).   The i80960 version of the linker needs a mod to
-        distinguish and handle the 24-bit case.
-
-   12-bit (MEMA)
-        MEMA formats are always promoted to MEMB (32-bit) if the displacement
-        is based on a symbol, because it could be relocated at link time.
-        The only time we use the 12-bit format is if an absolute value of
-        less than 4096 is specified, in which case we need neither a fixup nor
-        a relocation directive.  */
-
-#include "as.h"
-
-#include "safe-ctype.h"
-
-#include "opcode/i960.h"
-
-#if defined (OBJ_AOUT) || defined (OBJ_BOUT)
-
-#define TC_S_IS_SYSPROC(s)	((1 <= S_GET_OTHER (s)) && (S_GET_OTHER (s) <= 32))
-#define TC_S_IS_BALNAME(s)	(S_GET_OTHER (s) == N_BALNAME)
-#define TC_S_IS_CALLNAME(s)	(S_GET_OTHER (s) == N_CALLNAME)
-#define TC_S_IS_BADPROC(s)	((S_GET_OTHER (s) != 0) && !TC_S_IS_CALLNAME (s) && !TC_S_IS_BALNAME (s) && !TC_S_IS_SYSPROC (s))
-
-#define TC_S_SET_SYSPROC(s, p)	(S_SET_OTHER ((s), (p) + 1))
-#define TC_S_GET_SYSPROC(s)	(S_GET_OTHER (s) - 1)
-
-#define TC_S_FORCE_TO_BALNAME(s)	(S_SET_OTHER ((s), N_BALNAME))
-#define TC_S_FORCE_TO_CALLNAME(s)	(S_SET_OTHER ((s), N_CALLNAME))
-#define TC_S_FORCE_TO_SYSPROC(s)	{;}
-
-#else /* ! OBJ_A/BOUT */
-#ifdef OBJ_COFF
-
-#define TC_S_IS_SYSPROC(s)	(S_GET_STORAGE_CLASS (s) == C_SCALL)
-#define TC_S_IS_BALNAME(s)	(SF_GET_BALNAME (s))
-#define TC_S_IS_CALLNAME(s)	(SF_GET_CALLNAME (s))
-#define TC_S_IS_BADPROC(s)	(TC_S_IS_SYSPROC (s) && TC_S_GET_SYSPROC (s) < 0 && 31 < TC_S_GET_SYSPROC (s))
-
-#define TC_S_SET_SYSPROC(s, p)	((s)->sy_symbol.ost_auxent[1].x_sc.x_stindx = (p))
-#define TC_S_GET_SYSPROC(s)	((s)->sy_symbol.ost_auxent[1].x_sc.x_stindx)
-
-#define TC_S_FORCE_TO_BALNAME(s)	(SF_SET_BALNAME (s))
-#define TC_S_FORCE_TO_CALLNAME(s)	(SF_SET_CALLNAME (s))
-#define TC_S_FORCE_TO_SYSPROC(s)	(S_SET_STORAGE_CLASS ((s), C_SCALL))
-
-#else /* ! OBJ_COFF */
-#ifdef OBJ_ELF
-#define TC_S_IS_SYSPROC(s)	0
-
-#define TC_S_IS_BALNAME(s)	0
-#define TC_S_IS_CALLNAME(s)	0
-#define TC_S_IS_BADPROC(s)	0
-
-#define TC_S_SET_SYSPROC(s, p)
-#define TC_S_GET_SYSPROC(s)     0
-
-#define TC_S_FORCE_TO_BALNAME(s)
-#define TC_S_FORCE_TO_CALLNAME(s)
-#define TC_S_FORCE_TO_SYSPROC(s)
-#else
- #error COFF, a.out, b.out, and ELF are the only supported formats.
-#endif /* ! OBJ_ELF */
-#endif /* ! OBJ_COFF */
-#endif /* ! OBJ_A/BOUT */
-
-extern char *input_line_pointer;
-
-/* Local i80960 routines.  */
-struct memS;
-struct regop;
-
-/* See md_parse_option() for meanings of these options.  */
-static char norelax;			/* True if -norelax switch seen.  */
-static char instrument_branches;	/* True if -b switch seen.  */
-
-/* Characters that always start a comment.
-   If the pre-processor is disabled, these aren't very useful.  */
-const char comment_chars[] = "#";
-
-/* Characters that only start a comment at the beginning of
-   a line.  If the line seems to have the form '# 123 filename'
-   .line and .file directives will appear in the pre-processed output.
-
-   Note that input_file.c hand checks for '#' at the beginning of the
-   first line of the input file.  This is because the compiler outputs
-   #NO_APP at the beginning of its output.  */
-
-/* Also note that comments started like this one will always work.  */
-
-const char line_comment_chars[]   = "#";
-const char line_separator_chars[] = ";";
-
-/* Chars that can be used to separate mant from exp in floating point nums.  */
-const char EXP_CHARS[] = "eE";
-
-/* Chars that mean this number is a floating point constant,
-   as in 0f12.456 or 0d1.2345e12.  */
-const char FLT_CHARS[] = "fFdDtT";
-
-/* Table used by base assembler to relax addresses based on varying length
-   instructions.  The fields are:
-     1) most positive reach of this state,
-     2) most negative reach of this state,
-     3) how many bytes this mode will add to the size of the current frag
-     4) which index into the table to try if we can't fit into this one.
-
-   For i80960, the only application is the (de-)optimization of cobr
-   instructions into separate compare and branch instructions when a 13-bit
-   displacement won't hack it.  */
-const relax_typeS md_relax_table[] =
-{
-  {0, 0, 0, 0},				/* State 0 => no more relaxation possible.  */
-  {4088, -4096, 0, 2},			/* State 1: conditional branch (cobr).  */
-  {0x800000 - 8, -0x800000, 4, 0},	/* State 2: compare (reg) & branch (ctrl).  */
-};
-
-/* These are the machine dependent pseudo-ops.
-
-   This table describes all the machine specific pseudo-ops the assembler
-   has to support.  The fields are:
-        pseudo-op name without dot
-        function to call to execute this pseudo-op
-        integer arg to pass to the function.  */
-#define S_LEAFPROC	1
-#define S_SYSPROC	2
-
-/* Macros to extract info from an 'expressionS' structure 'e'.  */
-#define adds(e)	e.X_add_symbol
-#define offs(e)	e.X_add_number
-
-/* Branch-prediction bits for CTRL/COBR format opcodes.  */
-#define BP_MASK		0x00000002	/* Mask for branch-prediction bit.  */
-#define BP_TAKEN	0x00000000	/* Value to OR in to predict branch.  */
-#define BP_NOT_TAKEN	0x00000002	/* Value to OR in to predict no branch.  */
-
-/* Some instruction opcodes that we need explicitly.  */
-#define BE	0x12000000
-#define BG	0x11000000
-#define BGE	0x13000000
-#define BL	0x14000000
-#define BLE	0x16000000
-#define BNE	0x15000000
-#define BNO	0x10000000
-#define BO	0x17000000
-#define CHKBIT	0x5a002700
-#define CMPI	0x5a002080
-#define CMPO	0x5a002000
-
-#define B	0x08000000
-#define BAL	0x0b000000
-#define CALL	0x09000000
-#define CALLS	0x66003800
-#define RET	0x0a000000
-
-/* These masks are used to build up a set of MEMB mode bits.  */
-#define	A_BIT		0x0400
-#define	I_BIT		0x0800
-#define MEMB_BIT	0x1000
-#define	D_BIT		0x2000
-
-/* Mask for the only mode bit in a MEMA instruction (if set, abase reg is
-   used).  */
-#define MEMA_ABASE	0x2000
-
-/* Info from which a MEMA or MEMB format instruction can be generated.  */
-typedef struct memS
-  {
-    /* (First) 32 bits of instruction.  */
-    long opcode;
-    /* 0-(none), 12- or, 32-bit displacement needed.  */
-    int disp;
-    /* The expression in the source instruction from which the
-       displacement should be determined.  */
-    char *e;
-  }
-memS;
-
-/* The two pieces of info we need to generate a register operand.  */
-struct regop
-  {
-    int mode;			/* 0 =>local/global/spec reg; 1=> literal or fp reg.  */
-    int special;		/* 0 =>not a sfr;  1=> is a sfr (not valid w/mode=0).  */
-    int n;			/* Register number or literal value.  */
-  };
-
-/* Number and assembler mnemonic for all registers that can appear in
-   operands.  */
-static const struct
-  {
-    const char *reg_name;
-    int reg_num;
-  }
-regnames[] =
-{
-  { "pfp", 0 },
-  { "sp", 1 },
-  { "rip", 2 },
-  { "r3", 3 },
-  { "r4", 4 },
-  { "r5", 5 },
-  { "r6", 6 },
-  { "r7", 7 },
-  { "r8", 8 },
-  { "r9", 9 },
-  { "r10", 10 },
-  { "r11", 11 },
-  { "r12", 12 },
-  { "r13", 13 },
-  { "r14", 14 },
-  { "r15", 15 },
-  { "g0", 16 },
-  { "g1", 17 },
-  { "g2", 18 },
-  { "g3", 19 },
-  { "g4", 20 },
-  { "g5", 21 },
-  { "g6", 22 },
-  { "g7", 23 },
-  { "g8", 24 },
-  { "g9", 25 },
-  { "g10", 26 },
-  { "g11", 27 },
-  { "g12", 28 },
-  { "g13", 29 },
-  { "g14", 30 },
-  { "fp", 31 },
-
-  /* Numbers for special-function registers are for assembler internal
-     use only: they are scaled back to range [0-31] for binary output.  */
-#define SF0	32
-
-  { "sf0", 32 },
-  { "sf1", 33 },
-  { "sf2", 34 },
-  { "sf3", 35 },
-  { "sf4", 36 },
-  { "sf5", 37 },
-  { "sf6", 38 },
-  { "sf7", 39 },
-  { "sf8", 40 },
-  { "sf9", 41 },
-  { "sf10", 42 },
-  { "sf11", 43 },
-  { "sf12", 44 },
-  { "sf13", 45 },
-  { "sf14", 46 },
-  { "sf15", 47 },
-  { "sf16", 48 },
-  { "sf17", 49 },
-  { "sf18", 50 },
-  { "sf19", 51 },
-  { "sf20", 52 },
-  { "sf21", 53 },
-  { "sf22", 54 },
-  { "sf23", 55 },
-  { "sf24", 56 },
-  { "sf25", 57 },
-  { "sf26", 58 },
-  { "sf27", 59 },
-  { "sf28", 60 },
-  { "sf29", 61 },
-  { "sf30", 62 },
-  { "sf31", 63 },
-
-  /* Numbers for floating point registers are for assembler internal
-     use only: they are scaled back to [0-3] for binary output.  */
-#define FP0	64
-
-  { "fp0", 64 },
-  { "fp1", 65 },
-  { "fp2", 66 },
-  { "fp3", 67 },
-
-  { NULL, 0 },				/* END OF LIST */
-};
-
-#define	IS_RG_REG(n)	((0 <= (n)) && ((n) < SF0))
-#define	IS_SF_REG(n)	((SF0 <= (n)) && ((n) < FP0))
-#define	IS_FP_REG(n)	((n) >= FP0)
-
-/* Number and assembler mnemonic for all registers that can appear as
-   'abase' (indirect addressing) registers.  */
-static const struct
-{
-  const char *areg_name;
-  int areg_num;
-}
-aregs[] =
-{
-  { "(pfp)", 0 },
-  { "(sp)", 1 },
-  { "(rip)", 2 },
-  { "(r3)", 3 },
-  { "(r4)", 4 },
-  { "(r5)", 5 },
-  { "(r6)", 6 },
-  { "(r7)", 7 },
-  { "(r8)", 8 },
-  { "(r9)", 9 },
-  { "(r10)", 10 },
-  { "(r11)", 11 },
-  { "(r12)", 12 },
-  { "(r13)", 13 },
-  { "(r14)", 14 },
-  { "(r15)", 15 },
-  { "(g0)", 16 },
-  { "(g1)", 17 },
-  { "(g2)", 18 },
-  { "(g3)", 19 },
-  { "(g4)", 20 },
-  { "(g5)", 21 },
-  { "(g6)", 22 },
-  { "(g7)", 23 },
-  { "(g8)", 24 },
-  { "(g9)", 25 },
-  { "(g10)", 26 },
-  { "(g11)", 27 },
-  { "(g12)", 28 },
-  { "(g13)", 29 },
-  { "(g14)", 30 },
-  { "(fp)", 31 },
-
-#define IPREL	32
-  /* For assembler internal use only: this number never appears in binary
-     output.  */
-  { "(ip)", IPREL },
-
-  { NULL, 0 },				/* END OF LIST */
-};
-
-/* Hash tables.  */
-static struct hash_control *op_hash;	/* Opcode mnemonics.  */
-static struct hash_control *reg_hash;	/* Register name hash table.  */
-static struct hash_control *areg_hash;	/* Abase register hash table.  */
-
-/* Architecture for which we are assembling.  */
-#define ARCH_ANY	0	/* Default: no architecture checking done.  */
-#define ARCH_KA		1
-#define ARCH_KB		2
-#define ARCH_MC		3
-#define ARCH_CA		4
-#define ARCH_JX		5
-#define ARCH_HX		6
-int architecture = ARCH_ANY;	/* Architecture requested on invocation line.  */
-int iclasses_seen;		/* OR of instruction classes (I_* constants)
-				      for which we've actually assembled
-				        instructions.  */
-
-/* BRANCH-PREDICTION INSTRUMENTATION
-
-        The following supports generation of branch-prediction instrumentation
-        (turned on by -b switch).  The instrumentation collects counts
-        of branches taken/not-taken for later input to a utility that will
-        set the branch prediction bits of the instructions in accordance with
-        the behavior observed.  (Note that the KX series does not have
-        branch-prediction.)
-
-        The instrumentation consists of:
-
-        (1) before and after each conditional branch, a call to an external
-            routine that increments and steps over an inline counter.  The
-            counter itself, initialized to 0, immediately follows the call
-            instruction.  For each branch, the counter following the branch
-            is the number of times the branch was not taken, and the difference
-            between the counters is the number of times it was taken.  An
-            example of an instrumented conditional branch:
-
-                                call    BR_CNT_FUNC
-                                .word   0
-                LBRANCH23:      be      label
-                                call    BR_CNT_FUNC
-                                .word   0
-
-        (2) a table of pointers to the instrumented branches, so that an
-            external postprocessing routine can locate all of the counters.
-            the table begins with a 2-word header: a pointer to the next in
-            a linked list of such tables (initialized to 0);  and a count
-            of the number of entries in the table (exclusive of the header.
-
-            Note that input source code is expected to already contain calls
-            an external routine that will link the branch local table into a
-            list of such tables.  */
-
-/* Number of branches instrumented so far.  Also used to generate
-   unique local labels for each instrumented branch.  */
-static int br_cnt;
-
-#define BR_LABEL_BASE	"LBRANCH"
-/* Basename of local labels on instrumented branches, to avoid
-   conflict with compiler- generated local labels.  */
-
-#define BR_CNT_FUNC	"__inc_branch"
-/* Name of the external routine that will increment (and step over) an
-   inline counter.  */
-
-#define BR_TAB_NAME	"__BRANCH_TABLE__"
-/* Name of the table of pointers to branches.  A local (i.e.,
-   non-external) symbol.  */
-
-static void ctrl_fmt (const char *, long, int);
-
-
-void
-md_begin (void)
-{
-  int i;			/* Loop counter.  */
-  const struct i960_opcode *oP;	/* Pointer into opcode table.  */
-  const char *retval;		/* Value returned by hash functions.  */
-
-  op_hash = hash_new ();
-  reg_hash = hash_new ();
-  areg_hash = hash_new ();
-
-  /* For some reason, the base assembler uses an empty string for "no
-     error message", instead of a NULL pointer.  */
-  retval = 0;
-
-  for (oP = i960_opcodes; oP->name && !retval; oP++)
-    retval = hash_insert (op_hash, oP->name, (void *) oP);
-
-  for (i = 0; regnames[i].reg_name && !retval; i++)
-    retval = hash_insert (reg_hash, regnames[i].reg_name,
-			  (char *) &regnames[i].reg_num);
-
-  for (i = 0; aregs[i].areg_name && !retval; i++)
-    retval = hash_insert (areg_hash, aregs[i].areg_name,
-			  (char *) &aregs[i].areg_num);
-
-  if (retval)
-    as_fatal (_("Hashing returned \"%s\"."), retval);
-}
-
-/* parse_expr:		parse an expression
-
-   Use base assembler's expression parser to parse an expression.
-   It, unfortunately, runs off a global which we have to save/restore
-   in order to make it work for us.
-
-   An empty expression string is treated as an absolute 0.
-
-   Sets O_illegal regardless of expression evaluation if entire input
-   string is not consumed in the evaluation -- tolerate no dangling junk!  */
-
-static void
-parse_expr (const char *textP,		/* Text of expression to be parsed.  */
-	    expressionS *expP)		/* Where to put the results of parsing.  */
-{
-  char *save_in;		/* Save global here.  */
-  symbolS *symP;
-
-  know (textP);
-
-  if (*textP == '\0')
-    {
-      /* Treat empty string as absolute 0.  */
-      expP->X_add_symbol = expP->X_op_symbol = NULL;
-      expP->X_add_number = 0;
-      expP->X_op = O_constant;
-    }
-  else
-    {
-      save_in = input_line_pointer;	/* Save global.  */
-      input_line_pointer = (char *) textP;	/* Make parser work for us.  */
-
-      (void) expression (expP);
-      if ((size_t) (input_line_pointer - textP) != strlen (textP))
-	/* Did not consume all of the input.  */
-	expP->X_op = O_illegal;
-
-      symP = expP->X_add_symbol;
-      if (symP && (hash_find (reg_hash, S_GET_NAME (symP))))
-	/* Register name in an expression.  */
-	/* FIXME: this isn't much of a check any more.  */
-	expP->X_op = O_illegal;
-
-      input_line_pointer = save_in;	/* Restore global.  */
-    }
-}
-
-/* emit:	output instruction binary
-
-   Output instruction binary, in target byte order, 4 bytes at a time.
-   Return pointer to where it was placed.  */
-
-static char *
-emit (long instr)		/* Word to be output, host byte order.  */
-{
-  char *toP;			/* Where to output it.  */
-
-  toP = frag_more (4);		/* Allocate storage.  */
-  md_number_to_chars (toP, instr, 4);	/* Convert to target byte order.  */
-  return toP;
-}
-
-/* get_cdisp:	handle displacement for a COBR or CTRL instruction.
-
-   Parse displacement for a COBR or CTRL instruction.
-
-   If successful, output the instruction opcode and set up for it,
-   depending on the arg 'var_frag', either:
-  	    o an address fixup to be done when all symbol values are known, or
-  	    o a varying length code fragment, with address fixup info.  This
-  		will be done for cobr instructions that may have to be relaxed
-  		in to compare/branch instructions (8 bytes) if the final
-  		address displacement is greater than 13 bits.  */
-
-static void
-get_cdisp (const char *dispP, /* Displacement as specified in source instruction.  */
-	   const char *ifmtP, /* "COBR" or "CTRL" (for use in error message).  */
-	   long instr,  /* Instruction needing the displacement.  */
-	   int numbits, /* # bits of displacement (13 for COBR, 24 for CTRL).  */
-	   int var_frag,/* 1 if varying length code fragment should be emitted;
-			   0 if an address fix should be emitted.  */
-	   int callj)	/* 1 if callj relocation should be done; else 0.  */
-{
-  expressionS e;		/* Parsed expression.  */
-  fixS *fixP;			/* Structure describing needed address fix.  */
-  char *outP;			/* Where instruction binary is output to.  */
-
-  fixP = NULL;
-
-  parse_expr (dispP, &e);
-  switch (e.X_op)
-    {
-    case O_illegal:
-      as_bad (_("expression syntax error"));
-      break;
-
-    case O_symbol:
-      if (S_GET_SEGMENT (e.X_add_symbol) == now_seg
-	  || S_GET_SEGMENT (e.X_add_symbol) == undefined_section)
-	{
-	  if (var_frag)
-	    {
-	      outP = frag_more (8);	/* Allocate worst-case storage.  */
-	      md_number_to_chars (outP, instr, 4);
-	      frag_variant (rs_machine_dependent, 4, 4, 1,
-			    adds (e), offs (e), outP);
-	    }
-	  else
-	    {
-	      /* Set up a new fix structure, so address can be updated
-	         when all symbol values are known.  */
-	      outP = emit (instr);
-	      fixP = fix_new (frag_now,
-			      outP - frag_now->fr_literal,
-			      4,
-			      adds (e),
-			      offs (e),
-			      1,
-			      NO_RELOC);
-
-	      fixP->fx_tcbit = callj;
-
-	      /* We want to modify a bit field when the address is
-	         known.  But we don't need all the garbage in the
-	         bit_fix structure.  So we're going to lie and store
-	         the number of bits affected instead of a pointer.  */
-	      fixP->fx_bit_fixP = (bit_fixS *) (size_t) numbits;
-	    }
-	}
-      else
-	as_bad (_("attempt to branch into different segment"));
-      break;
-
-    default:
-      as_bad (_("target of %s instruction must be a label"), ifmtP);
-      break;
-    }
-}
-
-static int
-md_chars_to_number (char * val,		/* Value in target byte order.  */
-		    int n)		/* Number of bytes in the input.  */
-{
-  int retval;
-
-  for (retval = 0; n--;)
-    {
-      retval <<= 8;
-      retval |= (unsigned char) val[n];
-    }
-  return retval;
-}
-
-/* mema_to_memb:	convert a MEMA-format opcode to a MEMB-format opcode.
-
-   There are 2 possible MEMA formats:
-  	- displacement only
-  	- displacement + abase
-
-   They are distinguished by the setting of the MEMA_ABASE bit.  */
-
-static void
-mema_to_memb (char * opcodeP)	/* Where to find the opcode, in target byte order.  */
-{
-  long opcode;			/* Opcode in host byte order.  */
-  long mode;			/* Mode bits for MEMB instruction.  */
-
-  opcode = md_chars_to_number (opcodeP, 4);
-  know (!(opcode & MEMB_BIT));
-
-  mode = MEMB_BIT | D_BIT;
-  if (opcode & MEMA_ABASE)
-    mode |= A_BIT;
-
-  opcode &= 0xffffc000;		/* Clear MEMA offset and mode bits.  */
-  opcode |= mode;		/* Set MEMB mode bits.  */
-
-  md_number_to_chars (opcodeP, opcode, 4);
-}
-
-/* targ_has_sfr:
-
-   Return TRUE iff the target architecture supports the specified
-   special-function register (sfr).  */
-
-static int
-targ_has_sfr (int n)		/* Number (0-31) of sfr.  */
-{
-  switch (architecture)
-    {
-    case ARCH_KA:
-    case ARCH_KB:
-    case ARCH_MC:
-    case ARCH_JX:
-      return 0;
-    case ARCH_HX:
-      return ((0 <= n) && (n <= 4));
-    case ARCH_CA:
-    default:
-      return ((0 <= n) && (n <= 2));
-    }
-}
-
-/* Look up a (suspected) register name in the register table and return the
-   associated register number (or -1 if not found).  */
-
-static int
-get_regnum (char *regname)	/* Suspected register name.  */
-{
-  int *rP;
-
-  rP = (int *) hash_find (reg_hash, regname);
-  return (rP == NULL) ? -1 : *rP;
-}
-
-/* syntax: Issue a syntax error.  */
-
-static void
-syntax (void)
-{
-  as_bad (_("syntax error"));
-}
-
-/* parse_regop: parse a register operand.
-
-   In case of illegal operand, issue a message and return some valid
-   information so instruction processing can continue.  */
-
-static void
-parse_regop (struct regop *regopP,	/* Where to put description of register operand.  */
-	     char *optext,		/* Text of operand.  */
-	     char opdesc)      		/* Descriptor byte:  what's legal for this operand.  */
-{
-  int n;			/* Register number.  */
-  expressionS e;		/* Parsed expression.  */
-
-  /* See if operand is a register.  */
-  n = get_regnum (optext);
-  if (n >= 0)
-    {
-      if (IS_RG_REG (n))
-	{
-	  /* Global or local register.  */
-	  if (!REG_ALIGN (opdesc, n))
-	    as_bad (_("unaligned register"));
-
-	  regopP->n = n;
-	  regopP->mode = 0;
-	  regopP->special = 0;
-	  return;
-	}
-      else if (IS_FP_REG (n) && FP_OK (opdesc))
-	{
-	  /* Floating point register, and it's allowed.  */
-	  regopP->n = n - FP0;
-	  regopP->mode = 1;
-	  regopP->special = 0;
-	  return;
-	}
-      else if (IS_SF_REG (n) && SFR_OK (opdesc))
-	{
-	  /* Special-function register, and it's allowed.  */
-	  regopP->n = n - SF0;
-	  regopP->mode = 0;
-	  regopP->special = 1;
-	  if (!targ_has_sfr (regopP->n))
-	    as_bad (_("no such sfr in this architecture"));
-
-	  return;
-	}
-    }
-  else if (LIT_OK (opdesc))
-    {
-      /* How about a literal?  */
-      regopP->mode = 1;
-      regopP->special = 0;
-      if (FP_OK (opdesc))
-	{
-	  /* Floating point literal acceptable.  */
-	  /* Skip over 0f, 0d, or 0e prefix.  */
-	  if ((optext[0] == '0')
-	      && (optext[1] >= 'd')
-	      && (optext[1] <= 'f'))
-	    optext += 2;
-
-	  if (!strcmp (optext, "0.0") || !strcmp (optext, "0"))
-	    {
-	      regopP->n = 0x10;
-	      return;
-	    }
-
-	  if (!strcmp (optext, "1.0") || !strcmp (optext, "1"))
-	    {
-	      regopP->n = 0x16;
-	      return;
-	    }
-	}
-      else
-	{
-	  /* Fixed point literal acceptable.  */
-	  parse_expr (optext, &e);
-	  if (e.X_op != O_constant
-	      || (offs (e) < 0) || (offs (e) > 31))
-	    {
-	      as_bad (_("illegal literal"));
-	      offs (e) = 0;
-	    }
-	  regopP->n = offs (e);
-	  return;
-	}
-    }
-
-  /* Nothing worked.  */
-  syntax ();
-  regopP->mode = 0;		/* Register r0 is always a good one.  */
-  regopP->n = 0;
-  regopP->special = 0;
-}
-
-/* get_ispec:	parse a memory operand for an index specification
-
-   Here, an "index specification" is taken to be anything surrounded
-   by square brackets and NOT followed by anything else.
-
-   If it's found, detach it from the input string, remove the surrounding
-   square brackets, and return a pointer to it.  Otherwise, return NULL.  */
-
-static char *
-get_ispec (char *textP)  /* Pointer to memory operand from source instruction, no white space.  */
-
-{
-  /* Points to start of index specification.  */
-  char *start;
-  /* Points to end of index specification.  */
-  char *end;
-
-  /* Find opening square bracket, if any.  */
-  start = strchr (textP, '[');
-
-  if (start != NULL)
-    {
-      /* Eliminate '[', detach from rest of operand.  */
-      *start++ = '\0';
-
-      end = strchr (start, ']');
-
-      if (end == NULL)
-	as_bad (_("unmatched '['"));
-      else
-	{
-	  /* Eliminate ']' and make sure it was the last thing
-	     in the string.  */
-	  *end = '\0';
-	  if (*(end + 1) != '\0')
-	    as_bad (_("garbage after index spec ignored"));
-	}
-    }
-  return start;
-}
-
-/* parse_memop:	parse a memory operand
-
-  	This routine is based on the observation that the 4 mode bits of the
-  	MEMB format, taken individually, have fairly consistent meaning:
-
-  		 M3 (bit 13): 1 if displacement is present (D_BIT)
-  		 M2 (bit 12): 1 for MEMB instructions (MEMB_BIT)
-  		 M1 (bit 11): 1 if index is present (I_BIT)
-  		 M0 (bit 10): 1 if abase is present (A_BIT)
-
-  	So we parse the memory operand and set bits in the mode as we find
-  	things.  Then at the end, if we go to MEMB format, we need only set
-  	the MEMB bit (M2) and our mode is built for us.
-
-  	Unfortunately, I said "fairly consistent".  The exceptions:
-
-  		 DBIA
-  		 0100	Would seem illegal, but means "abase-only".
-
-  		 0101	Would seem to mean "abase-only" -- it means IP-relative.
-  			Must be converted to 0100.
-
-  		 0110	Would seem to mean "index-only", but is reserved.
-  			We turn on the D bit and provide a 0 displacement.
-
-  	The other thing to observe is that we parse from the right, peeling
-  	things * off as we go:  first any index spec, then any abase, then
-  	the displacement.  */
-
-static void
-parse_memop (memS *memP,	/* Where to put the results.  */
-	     char *argP,	/* Text of the operand to be parsed.  */
-	     int optype)	/* MEM1, MEM2, MEM4, MEM8, MEM12, or MEM16.  */
-{
-  char *indexP;			/* Pointer to index specification with "[]" removed.  */
-  char *p;			/* Temp char pointer.  */
-  char iprel_flag;		/* True if this is an IP-relative operand.  */
-  int regnum;			/* Register number.  */
-  /* Scale factor: 1,2,4,8, or 16.  Later converted to internal format
-     (0,1,2,3,4 respectively).  */
-  int scale;
-  int mode;			/* MEMB mode bits.  */
-  int *intP;			/* Pointer to register number.  */
-
-  /* The following table contains the default scale factors for each
-     type of memory instruction.  It is accessed using (optype-MEM1)
-     as an index -- thus it assumes the 'optype' constants are
-     assigned consecutive values, in the order they appear in this
-     table.  */
-  static const int def_scale[] =
-  {
-    1,				/* MEM1 */
-    2,				/* MEM2 */
-    4,				/* MEM4 */
-    8,				/* MEM8 */
-    -1,				/* MEM12 -- no valid default */
-    16				/* MEM16 */
-  };
-
-  iprel_flag = mode = 0;
-
-  /* Any index present? */
-  indexP = get_ispec (argP);
-  if (indexP)
-    {
-      p = strchr (indexP, '*');
-      if (p == NULL)
-	{
-	  /* No explicit scale -- use default for this instruction
-	     type and assembler mode.  */
-	  if (flag_mri)
-	    scale = 1;
-	  else
-	    /* GNU960 compatibility */
-	    scale = def_scale[optype - MEM1];
-	}
-      else
-	{
-	  *p++ = '\0';		/* Eliminate '*' */
-
-	  /* Now indexP->a '\0'-terminated register name,
-	     and p->a scale factor.  */
-
-	  if (!strcmp (p, "16"))
-	    scale = 16;
-	  else if (strchr ("1248", *p) && (p[1] == '\0'))
-	    scale = *p - '0';
-	  else
-	    scale = -1;
-	}
-
-      regnum = get_regnum (indexP);	/* Get index reg. # */
-      if (!IS_RG_REG (regnum))
-	{
-	  as_bad (_("invalid index register"));
-	  return;
-	}
-
-      /* Convert scale to its binary encoding.  */
-      switch (scale)
-	{
-	case 1:
-	  scale = 0 << 7;
-	  break;
-	case 2:
-	  scale = 1 << 7;
-	  break;
-	case 4:
-	  scale = 2 << 7;
-	  break;
-	case 8:
-	  scale = 3 << 7;
-	  break;
-	case 16:
-	  scale = 4 << 7;
-	  break;
-	default:
-	  as_bad (_("invalid scale factor"));
-	  return;
-	};
-
-      memP->opcode |= scale | regnum;	/* Set index bits in opcode.  */
-      mode |= I_BIT;			/* Found a valid index spec.  */
-    }
-
-  /* Any abase (Register Indirect) specification present?  */
-  if ((p = strrchr (argP, '(')) != NULL)
-    {
-      /* "(" is there -- does it start a legal abase spec?  If not, it
-         could be part of a displacement expression.  */
-      intP = (int *) hash_find (areg_hash, p);
-      if (intP != NULL)
-	{
-	  /* Got an abase here.  */
-	  regnum = *intP;
-	  *p = '\0';		/* Discard register spec.  */
-	  if (regnum == IPREL)
-	    /* We have to special-case ip-rel mode.  */
-	    iprel_flag = 1;
-	  else
-	    {
-	      memP->opcode |= regnum << 14;
-	      mode |= A_BIT;
-	    }
-	}
-    }
-
-  /* Any expression present?  */
-  memP->e = argP;
-  if (*argP != '\0')
-    mode |= D_BIT;
-
-  /* Special-case ip-relative addressing.  */
-  if (iprel_flag)
-    {
-      if (mode & I_BIT)
-	syntax ();
-      else
-	{
-	  memP->opcode |= 5 << 10;	/* IP-relative mode.  */
-	  memP->disp = 32;
-	}
-      return;
-    }
-
-  /* Handle all other modes.  */
-  switch (mode)
-    {
-    case D_BIT | A_BIT:
-      /* Go with MEMA instruction format for now (grow to MEMB later
-         if 12 bits is not enough for the displacement).  MEMA format
-         has a single mode bit: set it to indicate that abase is
-         present.  */
-      memP->opcode |= MEMA_ABASE;
-      memP->disp = 12;
-      break;
-
-    case D_BIT:
-      /* Go with MEMA instruction format for now (grow to MEMB later
-         if 12 bits is not enough for the displacement).  */
-      memP->disp = 12;
-      break;
-
-    case A_BIT:
-      /* For some reason, the bit string for this mode is not
-         consistent: it should be 0 (exclusive of the MEMB bit), so we
-         set it "by hand" here.  */
-      memP->opcode |= MEMB_BIT;
-      break;
-
-    case A_BIT | I_BIT:
-      /* set MEMB bit in mode, and OR in mode bits.  */
-      memP->opcode |= mode | MEMB_BIT;
-      break;
-
-    case I_BIT:
-      /* Treat missing displacement as displacement of 0.  */
-      mode |= D_BIT;
-      /* Fall through.  */
-    case D_BIT | A_BIT | I_BIT:
-    case D_BIT | I_BIT:
-      /* Set MEMB bit in mode, and OR in mode bits.  */
-      memP->opcode |= mode | MEMB_BIT;
-      memP->disp = 32;
-      break;
-
-    default:
-      syntax ();
-      break;
-    }
-}
-
-/* Generate a MEMA- or MEMB-format instruction.  */
-
-static void
-mem_fmt (char *args[],		/* args[0]->opcode mnemonic, args[1-3]->operands.  */
-	 struct i960_opcode *oP,/* Pointer to description of instruction.  */
-	 int callx)		/* Is this a callx opcode.  */
-{
-  int i;			/* Loop counter.  */
-  struct regop regop;		/* Description of register operand.  */
-  char opdesc;			/* Operand descriptor byte.  */
-  memS instr;			/* Description of binary to be output.  */
-  char *outP;			/* Where the binary was output to.  */
-  expressionS exp;		/* Parsed expression.  */
-  /* ->description of deferred address fixup.  */
-  fixS *fixP;
-
-#ifdef OBJ_COFF
-  /* COFF support isn't in place yet for callx relaxing.  */
-  callx = 0;
-#endif
-
-  memset (&instr, '\0', sizeof (memS));
-  instr.opcode = oP->opcode;
-
-  /* Process operands.  */
-  for (i = 1; i <= oP->num_ops; i++)
-    {
-      opdesc = oP->operand[i - 1];
-
-      if (MEMOP (opdesc))
-	parse_memop (&instr, args[i], oP->format);
-      else
-	{
-	  parse_regop (&regop, args[i], opdesc);
-	  instr.opcode |= regop.n << 19;
-	}
-    }
-
-  /* Parse the displacement; this must be done before emitting the
-     opcode, in case it is an expression using `.'.  */
-  parse_expr (instr.e, &exp);
-
-  /* Output opcode.  */
-  outP = emit (instr.opcode);
-
-  if (instr.disp == 0)
-    return;
-
-  /* Process the displacement.  */
-  switch (exp.X_op)
-    {
-    case O_illegal:
-      as_bad (_("expression syntax error"));
-      break;
-
-    case O_constant:
-      if (instr.disp == 32)
-	(void) emit (offs (exp));	/* Output displacement.  */
-      else
-	{
-	  /* 12-bit displacement.  */
-	  if (offs (exp) & ~0xfff)
-	    {
-	      /* Won't fit in 12 bits: convert already-output
-	         instruction to MEMB format, output
-	         displacement.  */
-	      mema_to_memb (outP);
-	      (void) emit (offs (exp));
-	    }
-	  else
-	    {
-	      /* WILL fit in 12 bits:  OR into opcode and
-	         overwrite the binary we already put out.  */
-	      instr.opcode |= offs (exp);
-	      md_number_to_chars (outP, instr.opcode, 4);
-	    }
-	}
-      break;
-
-    default:
-      if (instr.disp == 12)
-	/* Displacement is dependent on a symbol, whose value
-	   may change at link time.  We HAVE to reserve 32 bits.
-	   Convert already-output opcode to MEMB format.  */
-	mema_to_memb (outP);
-
-      /* Output 0 displacement and set up address fixup for when
-         this symbol's value becomes known.  */
-      outP = emit ((long) 0);
-      fixP = fix_new_exp (frag_now,
-			  outP - frag_now->fr_literal,
-			  4, &exp, 0, NO_RELOC);
-      /* Steve's linker relaxing hack.  Mark this 32-bit relocation as
-         being in the instruction stream, specifically as part of a callx
-         instruction.  */
-      fixP->fx_bsr = callx;
-      break;
-    }
-}
-
-/* targ_has_iclass:
-
-   Return TRUE iff the target architecture supports the indicated
-   class of instructions.  */
-
-static int
-targ_has_iclass (int ic) /* Instruction class;  one of:
-			    I_BASE, I_CX, I_DEC, I_KX, I_FP, I_MIL, I_CASIM, I_CX2, I_HX, I_HX2.  */
-{
-  iclasses_seen |= ic;
-
-  switch (architecture)
-    {
-    case ARCH_KA:
-      return ic & (I_BASE | I_KX);
-    case ARCH_KB:
-      return ic & (I_BASE | I_KX | I_FP | I_DEC);
-    case ARCH_MC:
-      return ic & (I_BASE | I_KX | I_FP | I_DEC | I_MIL);
-    case ARCH_CA:
-      return ic & (I_BASE | I_CX | I_CX2 | I_CASIM);
-    case ARCH_JX:
-      return ic & (I_BASE | I_CX2 | I_JX);
-    case ARCH_HX:
-      return ic & (I_BASE | I_CX2 | I_JX | I_HX);
-    default:
-      if ((iclasses_seen & (I_KX | I_FP | I_DEC | I_MIL))
-	  && (iclasses_seen & (I_CX | I_CX2)))
-	{
-	  as_warn (_("architecture of opcode conflicts with that of earlier instruction(s)"));
-	  iclasses_seen &= ~ic;
-	}
-      return 1;
-    }
-}
-
-/* shift_ok:
-   Determine if a "shlo" instruction can be used to implement a "ldconst".
-   This means that some number X < 32 can be shifted left to produce the
-   constant of interest.
-
-   Return the shift count, or 0 if we can't do it.
-   Caller calculates X by shifting original constant right 'shift' places.  */
-
-static int
-shift_ok (int n)		/* The constant of interest.  */
-{
-  int shift;			/* The shift count.  */
-
-  if (n <= 0)
-    /* Can't do it for negative numbers.  */
-    return 0;
-
-  /* Shift 'n' right until a 1 is about to be lost.  */
-  for (shift = 0; (n & 1) == 0; shift++)
-    n >>= 1;
-
-  if (n >= 32)
-    return 0;
-
-  return shift;
-}
-
-/* parse_ldcont:
-   Parse and replace a 'ldconst' pseudo-instruction with an appropriate
-   i80960 instruction.
-
-   Assumes the input consists of:
-  		arg[0]	opcode mnemonic ('ldconst')
-  		arg[1]  first operand (constant)
-  		arg[2]	name of register to be loaded
-
-   Replaces opcode and/or operands as appropriate.
-
-   Returns the new number of arguments, or -1 on failure.  */
-
-static int
-parse_ldconst (char *arg[])	/* See above.  */
-{
-  int n;			/* Constant to be loaded.  */
-  int shift;			/* Shift count for "shlo" instruction.  */
-  static char buf[5];		/* Literal for first operand.  */
-  static char buf2[5];		/* Literal for second operand.  */
-  expressionS e;		/* Parsed expression.  */
-
-  arg[3] = NULL;		/* So we can tell at the end if it got used or not.  */
-
-  parse_expr (arg[1], &e);
-  switch (e.X_op)
-    {
-    default:
-      /* We're dependent on one or more symbols -- use "lda".  */
-      arg[0] = (char *) "lda";
-      break;
-
-    case O_constant:
-      /* Try the following mappings:
-              ldconst   0,<reg>  -> mov  0,<reg>
-              ldconst  31,<reg>  -> mov  31,<reg>
-              ldconst  32,<reg>  -> addo 1,31,<reg>
-              ldconst  62,<reg>  -> addo 31,31,<reg>
-              ldconst  64,<reg>  -> shlo 8,3,<reg>
-              ldconst  -1,<reg>  -> subo 1,0,<reg>
-              ldconst -31,<reg>  -> subo 31,0,<reg>
-
-         Anything else becomes:
-                lda xxx,<reg>.  */
-      n = offs (e);
-      if ((0 <= n) && (n <= 31))
-	arg[0] = (char *) "mov";
-      else if ((-31 <= n) && (n <= -1))
-	{
-	  arg[0] = (char *) "subo";
-	  arg[3] = arg[2];
-	  sprintf (buf, "%d", -n);
-	  arg[1] = buf;
-	  arg[2] = (char *) "0";
-	}
-      else if ((32 <= n) && (n <= 62))
-	{
-	  arg[0] = (char *) "addo";
-	  arg[3] = arg[2];
-	  arg[1] = (char *) "31";
-	  sprintf (buf, "%d", n - 31);
-	  arg[2] = buf;
-	}
-      else if ((shift = shift_ok (n)) != 0)
-	{
-	  arg[0] = (char *) "shlo";
-	  arg[3] = arg[2];
-	  sprintf (buf, "%d", shift);
-	  arg[1] = buf;
-	  sprintf (buf2, "%d", n >> shift);
-	  arg[2] = buf2;
-	}
-      else
-	arg[0] = (char *) "lda";
-      break;
-
-    case O_illegal:
-      as_bad (_("invalid constant"));
-      return -1;
-      break;
-    }
-  return (arg[3] == 0) ? 2 : 3;
-}
-
-/* reg_fmt:	generate a REG-format instruction.  */
-
-static void
-reg_fmt (char *args[],		/* args[0]->opcode mnemonic, args[1-3]->operands.  */
-	 struct i960_opcode *oP)/* Pointer to description of instruction.  */
-{
-  long instr;			/* Binary to be output.  */
-  struct regop regop;		/* Description of register operand.  */
-  int n_ops;			/* Number of operands.  */
-
-  instr = oP->opcode;
-  n_ops = oP->num_ops;
-
-  if (n_ops >= 1)
-    {
-      parse_regop (&regop, args[1], oP->operand[0]);
-
-      if ((n_ops == 1) && !(instr & M3))
-	{
-	  /* 1-operand instruction in which the dst field should
-	     be used (instead of src1).  */
-	  regop.n <<= 19;
-	  if (regop.special)
-	    regop.mode = regop.special;
-	  regop.mode <<= 13;
-	  regop.special = 0;
-	}
-      else
-	{
-	  /* regop.n goes in bit 0, needs no shifting.  */
-	  regop.mode <<= 11;
-	  regop.special <<= 5;
-	}
-      instr |= regop.n | regop.mode | regop.special;
-    }
-
-  if (n_ops >= 2)
-    {
-      parse_regop (&regop, args[2], oP->operand[1]);
-
-      if ((n_ops == 2) && !(instr & M3))
-	{
-	  /* 2-operand instruction in which the dst field should
-	     be used instead of src2).  */
-	  regop.n <<= 19;
-	  if (regop.special)
-	    regop.mode = regop.special;
-	  regop.mode <<= 13;
-	  regop.special = 0;
-	}
-      else
-	{
-	  regop.n <<= 14;
-	  regop.mode <<= 12;
-	  regop.special <<= 6;
-	}
-      instr |= regop.n | regop.mode | regop.special;
-    }
-  if (n_ops == 3)
-    {
-      parse_regop (&regop, args[3], oP->operand[2]);
-      if (regop.special)
-	regop.mode = regop.special;
-      instr |= (regop.n <<= 19) | (regop.mode <<= 13);
-    }
-  emit (instr);
-}
-
-/* get_args:	break individual arguments out of comma-separated list
-
-   Input assumptions:
-  	- all comments and labels have been removed
-  	- all strings of whitespace have been collapsed to a single blank.
-  	- all character constants ('x') have been replaced with decimal
-
-   Output:
-  	args[0] is untouched. args[1] points to first operand, etc. All args:
-  	- are NULL-terminated
-  	- contain no whitespace
-
-   Return value:
-   Number of operands (0,1,2, or 3) or -1 on error.  */
-
-static int
-get_args (char *p, 	/* Pointer to comma-separated operands; Mucked by us.  */
-	  char *args[]) /* Output arg: pointers to operands placed in args[1-3].
-			   Must accommodate 4 entries (args[0-3]).  */
-
-{
-  int n;		/* Number of operands.  */
-  char *to;
-
-  /* Skip lead white space.  */
-  while (*p == ' ')
-    p++;
-
-  if (*p == '\0')
-    return 0;
-
-  n = 1;
-  args[1] = p;
-
-  /* Squeeze blanks out by moving non-blanks toward start of string.
-     Isolate operands, whenever comma is found.  */
-  to = p;
-  while (*p != '\0')
-    {
-      if (*p == ' '
-	  && (! ISALNUM (p[1])
-	      || ! ISALNUM (p[-1])))
-	p++;
-      else if (*p == ',')
-	{
-	  /* Start of operand.  */
-	  if (n == 3)
-	    {
-	      as_bad (_("too many operands"));
-	      return -1;
-	    }
-	  *to++ = '\0';		/* Terminate argument.  */
-	  args[++n] = to;	/* Start next argument.  */
-	  p++;
-	}
-      else
-	*to++ = *p++;
-    }
-  *to = '\0';
-  return n;
-}
-
-/* i_scan:	perform lexical scan of ascii assembler instruction.
-
-   Input assumptions:
-  	- input string is an i80960 instruction (not a pseudo-op)
-  	- all comments and labels have been removed
-  	- all strings of whitespace have been collapsed to a single blank.
-
-   Output:
-  	args[0] points to opcode, other entries point to operands. All strings:
-  	- are NULL-terminated
-  	- contain no whitespace
-  	- have character constants ('x') replaced with a decimal number
-
-   Return value:
-     Number of operands (0,1,2, or 3) or -1 on error.  */
-
-static int
-i_scan (char *iP,     /* Pointer to ascii instruction;  Mucked by us.  */
-	char *args[]) /* Output arg: pointers to opcode and operands placed here.
-			 Must accommodate 4 entries.  */
-{
-  /* Isolate opcode.  */
-  if (*(iP) == ' ')
-    iP++;
-
-  args[0] = iP;
-  for (; *iP != ' '; iP++)
-    {
-      if (*iP == '\0')
-	{
-	  /* There are no operands.  */
-	  if (args[0] == iP)
-	    {
-	      /* We never moved: there was no opcode either!  */
-	      as_bad (_("missing opcode"));
-	      return -1;
-	    }
-	  return 0;
-	}
-    }
-  *iP++ = '\0';
-  return (get_args (iP, args));
-}
-
-static void
-brcnt_emit (void)
-{
-  /* Emit call to "increment" routine.  */
-  ctrl_fmt (BR_CNT_FUNC, CALL, 1);
-  /* Emit inline counter to be incremented.  */
-  emit (0);
-}
-
-static char *
-brlab_next (void)
-{
-  static char buf[20];
-
-  sprintf (buf, "%s%d", BR_LABEL_BASE, br_cnt++);
-  return buf;
-}
-
-static void
-ctrl_fmt (const char *targP,		/* Pointer to text of lone operand (if any).  */
-	  long opcode,		/* Template of instruction.  */
-	  int num_ops)		/* Number of operands.  */
-{
-  int instrument;		/* TRUE iff we should add instrumentation to track
-				   how often the branch is taken.  */
-
-  if (num_ops == 0)
-    emit (opcode);		/* Output opcode.  */
-  else
-    {
-      instrument = instrument_branches && (opcode != CALL)
-	&& (opcode != B) && (opcode != RET) && (opcode != BAL);
-
-      if (instrument)
-	{
-	  brcnt_emit ();
-	  colon (brlab_next ());
-	}
-
-      /* The operand MUST be an ip-relative displacement. Parse it
-         and set up address fix for the instruction we just output.  */
-      get_cdisp (targP, "CTRL", opcode, 24, 0, 0);
-
-      if (instrument)
-	brcnt_emit ();
-    }
-}
-
-static void
-cobr_fmt (/* arg[0]->opcode mnemonic, arg[1-3]->operands (ascii) */
-	  char *arg[],
-	  /* Opcode, with branch-prediction bits already set if necessary.  */
-	  long opcode,
-	  /* Pointer to description of instruction.  */
-	  struct i960_opcode *oP)
-{
-  long instr;			/* 32-bit instruction.  */
-  struct regop regop;		/* Description of register operand.  */
-  int n;			/* Number of operands.  */
-  int var_frag;			/* 1 if varying length code fragment should
-				     be emitted;  0 if an address fix
-				        should be emitted.  */
-
-  instr = opcode;
-  n = oP->num_ops;
-
-  if (n >= 1)
-    {
-      /* First operand (if any) of a COBR is always a register
-	 operand.  Parse it.  */
-      parse_regop (&regop, arg[1], oP->operand[0]);
-      instr |= (regop.n << 19) | (regop.mode << 13);
-    }
-
-  if (n >= 2)
-    {
-      /* Second operand (if any) of a COBR is always a register
-	 operand.  Parse it.  */
-      parse_regop (&regop, arg[2], oP->operand[1]);
-      instr |= (regop.n << 14) | regop.special;
-    }
-
-  if (n < 3)
-    emit (instr);
-  else
-    {
-      if (instrument_branches)
-	{
-	  brcnt_emit ();
-	  colon (brlab_next ());
-	}
-
-      /* A third operand to a COBR is always a displacement.  Parse
-         it; if it's relaxable (a cobr "j" directive, or any cobr
-         other than bbs/bbc when the "-norelax" option is not in use)
-         set up a variable code fragment; otherwise set up an address
-         fix.  */
-      var_frag = !norelax || (oP->format == COJ);	/* TRUE or FALSE */
-      get_cdisp (arg[3], "COBR", instr, 13, var_frag, 0);
-
-      if (instrument_branches)
-	brcnt_emit ();
-    }
-}
-
-/* Assumptions about the passed-in text:
-  	- all comments, labels removed
-  	- text is an instruction
-  	- all white space compressed to single blanks
-  	- all character constants have been replaced with decimal.  */
-
-void
-md_assemble (char *textP)
-{
-  /* Parsed instruction text, containing NO whitespace: arg[0]->opcode
-     mnemonic arg[1-3]->operands, with char constants replaced by
-     decimal numbers.  */
-  char *args[4];
-  /* Number of instruction operands.  */
-  int n_ops;
-  /* Pointer to instruction description.  */
-  struct i960_opcode *oP;
-  /* TRUE iff opcode mnemonic included branch-prediction suffix (".f"
-     or ".t").  */
-  int branch_predict;
-  /* Setting of branch-prediction bit(s) to be OR'd into instruction
-     opcode of CTRL/COBR format instructions.  */
-  long bp_bits;
-  /* Offset of last character in opcode mnemonic.  */
-  int n;
-  const char *bp_error_msg = _("branch prediction invalid on this opcode");
-
-  /* Parse instruction into opcode and operands.  */
-  memset (args, '\0', sizeof (args));
-
-  n_ops = i_scan (textP, args);
-
-  if (n_ops == -1)
-    return;			/* Error message already issued.  */
-
-  /* Do "macro substitution" (sort of) on 'ldconst' pseudo-instruction.  */
-  if (!strcmp (args[0], "ldconst"))
-    {
-      n_ops = parse_ldconst (args);
-      if (n_ops == -1)
-	return;
-    }
-
-  /* Check for branch-prediction suffix on opcode mnemonic, strip it off.  */
-  n = strlen (args[0]) - 1;
-  branch_predict = 0;
-  bp_bits = 0;
-
-  if (args[0][n - 1] == '.' && (args[0][n] == 't' || args[0][n] == 'f'))
-    {
-      /* We could check here to see if the target architecture
-	 supports branch prediction, but why bother?  The bit will
-	 just be ignored by processors that don't use it.  */
-      branch_predict = 1;
-      bp_bits = (args[0][n] == 't') ? BP_TAKEN : BP_NOT_TAKEN;
-      args[0][n - 1] = '\0';	/* Strip suffix from opcode mnemonic */
-    }
-
-  /* Look up opcode mnemonic in table and check number of operands.
-     Check that opcode is legal for the target architecture.  If all
-     looks good, assemble instruction.  */
-  oP = (struct i960_opcode *) hash_find (op_hash, args[0]);
-  if (!oP || !targ_has_iclass (oP->iclass))
-    as_bad (_("invalid opcode, \"%s\"."), args[0]);
-  else if (n_ops != oP->num_ops)
-    as_bad (_("improper number of operands.  Expecting %d, got %d"),
-	    oP->num_ops, n_ops);
-  else
-    {
-      switch (oP->format)
-	{
-	case FBRA:
-	case CTRL:
-	  ctrl_fmt (args[1], oP->opcode | bp_bits, oP->num_ops);
-	  if (oP->format == FBRA)
-	    /* Now generate a 'bno' to same arg */
-	    ctrl_fmt (args[1], BNO | bp_bits, 1);
-	  break;
-	case COBR:
-	case COJ:
-	  cobr_fmt (args, oP->opcode | bp_bits, oP);
-	  break;
-	case REG:
-	  if (branch_predict)
-	    as_warn ("%s", bp_error_msg);
-	  reg_fmt (args, oP);
-	  break;
-	case MEM1:
-	  if (args[0][0] == 'c' && args[0][1] == 'a')
-	    {
-	      if (branch_predict)
-		as_warn ("%s", bp_error_msg);
-	      mem_fmt (args, oP, 1);
-	      break;
-	    }
-	  /* Fall through.  */
-	case MEM2:
-	case MEM4:
-	case MEM8:
-	case MEM12:
-	case MEM16:
-	  if (branch_predict)
-	    as_warn ("%s", bp_error_msg);
-	  mem_fmt (args, oP, 0);
-	  break;
-	case CALLJ:
-	  if (branch_predict)
-	    as_warn ("%s", bp_error_msg);
-	  /* Output opcode & set up "fixup" (relocation); flag
-	     relocation as 'callj' type.  */
-	  know (oP->num_ops == 1);
-	  get_cdisp (args[1], "CTRL", oP->opcode, 24, 0, 1);
-	  break;
-	default:
-	  BAD_CASE (oP->format);
-	  break;
-	}
-    }
-}
-
-void
-md_number_to_chars (char *buf,
-		    valueT value,
-		    int n)
-{
-  number_to_chars_littleendian (buf, value, n);
-}
-
-const char *
-md_atof (int type, char *litP, int *sizeP)
-{
-  return ieee_md_atof (type, litP, sizeP, FALSE);
-}
-
-static void
-md_number_to_imm (char *buf, long val, int n)
-{
-  md_number_to_chars (buf, val, n);
-}
-
-static void
-md_number_to_field (char *instrP,		/* Pointer to instruction to be fixed.  */
-		    long val,			/* Address fixup value.  */
-		    bit_fixS *bfixP)		/* Description of bit field to be fixed up.  */
-{
-  int numbits;			/* Length of bit field to be fixed.  */
-  long instr;			/* 32-bit instruction to be fixed-up.  */
-  long sign;			/* 0 or -1, according to sign bit of 'val'.  */
-
-  /* Convert instruction back to host byte order.  */
-  instr = md_chars_to_number (instrP, 4);
-
-  /* Surprise! -- we stored the number of bits to be modified rather
-     than a pointer to a structure.  */
-  numbits = (int) (size_t) bfixP;
-  if (numbits == 1)
-    /* This is a no-op, stuck here by reloc_callj().  */
-    return;
-
-  know ((numbits == 13) || (numbits == 24));
-
-  /* Propagate sign bit of 'val' for the given number of bits.  Result
-     should be all 0 or all 1.  */
-  sign = val >> ((int) numbits - 1);
-  if (((val < 0) && (sign != -1))
-      || ((val > 0) && (sign != 0)))
-    as_bad (_("Fixup of %ld too large for field width of %d"),
-	    val, numbits);
-  else
-    {
-      /* Put bit field into instruction and write back in target
-         * byte order.  */
-      val &= ~(-(1 << (int) numbits));	/* Clear unused sign bits.  */
-      instr |= val;
-      md_number_to_chars (instrP, instr, 4);
-    }
-}
-
-
-/* md_parse_option
-  	Invocation line includes a switch not recognized by the base assembler.
-  	See if it's a processor-specific option.  For the 960, these are:
-
-  	-norelax:
-  		Conditional branch instructions that require displacements
-  		greater than 13 bits (or that have external targets) should
-  		generate errors.  The default is to replace each such
-  		instruction with the corresponding compare (or chkbit) and
-  		branch instructions.  Note that the Intel "j" cobr directives
-  		are ALWAYS "de-optimized" in this way when necessary,
-  		regardless of the setting of this option.
-
-  	-b:
-  		Add code to collect information about branches taken, for
-  		later optimization of branch prediction bits by a separate
-  		tool.  COBR and CNTL format instructions have branch
-  		prediction bits (in the CX architecture);  if "BR" represents
-  		an instruction in one of these classes, the following rep-
-  		resents the code generated by the assembler:
-
-  			call	<increment routine>
-  			.word	0	# pre-counter
-  		Label:  BR
-  			call	<increment routine>
-  			.word	0	# post-counter
-
-  		A table of all such "Labels" is also generated.
-
-  	-AKA, -AKB, -AKC, -ASA, -ASB, -AMC, -ACA:
-  		Select the 80960 architecture.  Instructions or features not
-  		supported by the selected architecture cause fatal errors.
-  		The default is to generate code for any instruction or feature
-  		that is supported by SOME version of the 960 (even if this
-  		means mixing architectures!).  */
-
-const char *md_shortopts = "A:b";
-struct option md_longopts[] =
-{
-#define OPTION_LINKRELAX (OPTION_MD_BASE)
-  {"linkrelax", no_argument, NULL, OPTION_LINKRELAX},
-  {"link-relax", no_argument, NULL, OPTION_LINKRELAX},
-#define OPTION_NORELAX (OPTION_MD_BASE + 1)
-  {"norelax", no_argument, NULL, OPTION_NORELAX},
-  {"no-relax", no_argument, NULL, OPTION_NORELAX},
-  {NULL, no_argument, NULL, 0}
-};
-size_t md_longopts_size = sizeof (md_longopts);
-
-struct tabentry
-{
-  const char *flag;
-  int arch;
-};
-static const struct tabentry arch_tab[] =
-{
-  {"KA", ARCH_KA},
-  {"KB", ARCH_KB},
-  {"SA", ARCH_KA},		/* Synonym for KA.  */
-  {"SB", ARCH_KB},		/* Synonym for KB.  */
-  {"KC", ARCH_MC},		/* Synonym for MC.  */
-  {"MC", ARCH_MC},
-  {"CA", ARCH_CA},
-  {"JX", ARCH_JX},
-  {"HX", ARCH_HX},
-  {NULL, 0}
-};
-
-int
-md_parse_option (int c, const char *arg)
-{
-  switch (c)
-    {
-    case OPTION_LINKRELAX:
-      linkrelax = 1;
-      flag_keep_locals = 1;
-      break;
-
-    case OPTION_NORELAX:
-      norelax = 1;
-      break;
-
-    case 'b':
-      instrument_branches = 1;
-      break;
-
-    case 'A':
-      {
-	const struct tabentry *tp;
-	const char *p = arg;
-
-	for (tp = arch_tab; tp->flag != NULL; tp++)
-	  if (!strcmp (p, tp->flag))
-	    break;
-
-	if (tp->flag == NULL)
-	  {
-	    as_bad (_("invalid architecture %s"), p);
-	    return 0;
-	  }
-	else
-	  architecture = tp->arch;
-      }
-      break;
-
-    default:
-      return 0;
-    }
-
-  return 1;
-}
-
-void
-md_show_usage (FILE *stream)
-{
-  int i;
-
-  fprintf (stream, _("I960 options:\n"));
-  for (i = 0; arch_tab[i].flag; i++)
-    fprintf (stream, "%s-A%s", i ? " | " : "", arch_tab[i].flag);
-  fprintf (stream, _("\n\
-			specify variant of 960 architecture\n\
--b			add code to collect statistics about branches taken\n\
--link-relax		preserve individual alignment directives so linker\n\
-			can do relaxing (b.out format only)\n\
--no-relax		don't alter compare-and-branch instructions for\n\
-			long displacements\n"));
-}
-
-/* relax_cobr:
-   Replace cobr instruction in a code fragment with equivalent branch and
-   compare instructions, so it can reach beyond a 13-bit displacement.
-   Set up an address fix/relocation for the new branch instruction.  */
-
-/* This "conditional jump" table maps cobr instructions into
-   equivalent compare and branch opcodes.  */
-
-static const
-struct
-{
-  long compare;
-  long branch;
-}
-
-coj[] =
-{				/* COBR OPCODE: */
-  { CHKBIT, BNO },		/*      0x30 - bbc */
-  { CMPO, BG },			/*      0x31 - cmpobg */
-  { CMPO, BE },			/*      0x32 - cmpobe */
-  { CMPO, BGE },		/*      0x33 - cmpobge */
-  { CMPO, BL },			/*      0x34 - cmpobl */
-  { CMPO, BNE },		/*      0x35 - cmpobne */
-  { CMPO, BLE },		/*      0x36 - cmpoble */
-  { CHKBIT, BO },		/*      0x37 - bbs */
-  { CMPI, BNO },		/*      0x38 - cmpibno */
-  { CMPI, BG },			/*      0x39 - cmpibg */
-  { CMPI, BE },			/*      0x3a - cmpibe */
-  { CMPI, BGE },		/*      0x3b - cmpibge */
-  { CMPI, BL },			/*      0x3c - cmpibl */
-  { CMPI, BNE },		/*      0x3d - cmpibne */
-  { CMPI, BLE },		/*      0x3e - cmpible */
-  { CMPI, BO },			/*      0x3f - cmpibo */
-};
-
-static void
-relax_cobr (fragS *fragP)	/* fragP->fr_opcode is assumed to point to
-				   the cobr instruction, which comes at the
-				   end of the code fragment.  */
-{
-  int opcode, src1, src2, m1, s2;
-  /* Bit fields from cobr instruction.  */
-  long bp_bits;			/* Branch prediction bits from cobr instruction.  */
-  long instr;			/* A single i960 instruction.  */
-  /* ->instruction to be replaced.  */
-  char *iP;
-  fixS *fixP;			/* Relocation that can be done at assembly time.  */
-
-  /* Pick up & parse cobr instruction.  */
-  iP = fragP->fr_opcode;
-  instr = md_chars_to_number (iP, 4);
-  opcode = ((instr >> 24) & 0xff) - 0x30;	/* "-0x30" for table index.  */
-  src1 = (instr >> 19) & 0x1f;
-  m1 = (instr >> 13) & 1;
-  s2 = instr & 1;
-  src2 = (instr >> 14) & 0x1f;
-  bp_bits = instr & BP_MASK;
-
-  /* Generate and output compare instruction.  */
-  instr = coj[opcode].compare
-    | src1 | (m1 << 11) | (s2 << 6) | (src2 << 14);
-  md_number_to_chars (iP, instr, 4);
-
-  /* Output branch instruction.  */
-  md_number_to_chars (iP + 4, coj[opcode].branch | bp_bits, 4);
-
-  /* Set up address fixup/relocation.  */
-  fixP = fix_new (fragP,
-		  iP + 4 - fragP->fr_literal,
-		  4,
-		  fragP->fr_symbol,
-		  fragP->fr_offset,
-		  1,
-		  NO_RELOC);
-
-  fixP->fx_bit_fixP = (bit_fixS *) 24;	/* Store size of bit field.  */
-
-  fragP->fr_fix += 4;
-  frag_wane (fragP);
-}
-
-/* md_convert_frag:
-
-   Called by base assembler after address relaxation is finished:  modify
-   variable fragments according to how much relaxation was done.
-
-   If the fragment substate is still 1, a 13-bit displacement was enough
-   to reach the symbol in question.  Set up an address fixup, but otherwise
-   leave the cobr instruction alone.
-
-   If the fragment substate is 2, a 13-bit displacement was not enough.
-   Replace the cobr with a two instructions (a compare and a branch).  */
-
-void
-md_convert_frag (bfd *abfd ATTRIBUTE_UNUSED,
-		 segT sec ATTRIBUTE_UNUSED,
-		 fragS *fragP)
-{
-  /* Structure describing needed address fix.  */
-  fixS *fixP;
-
-  switch (fragP->fr_subtype)
-    {
-    case 1:
-      /* Leave single cobr instruction.  */
-      fixP = fix_new (fragP,
-		      fragP->fr_opcode - fragP->fr_literal,
-		      4,
-		      fragP->fr_symbol,
-		      fragP->fr_offset,
-		      1,
-		      NO_RELOC);
-
-      fixP->fx_bit_fixP = (bit_fixS *) 13;	/* Size of bit field.  */
-      break;
-    case 2:
-      /* Replace cobr with compare/branch instructions.  */
-      relax_cobr (fragP);
-      break;
-    default:
-      BAD_CASE (fragP->fr_subtype);
-      break;
-    }
-}
-
-/* md_estimate_size_before_relax:  How much does it look like *fragP will grow?
-
-   Called by base assembler just before address relaxation.
-   Return the amount by which the fragment will grow.
-
-   Any symbol that is now undefined will not become defined; cobr's
-   based on undefined symbols will have to be replaced with a compare
-   instruction and a branch instruction, and the code fragment will grow
-   by 4 bytes.  */
-
-int
-md_estimate_size_before_relax (fragS *fragP, segT segment_type)
-{
-  /* If symbol is undefined in this segment, go to "relaxed" state
-     (compare and branch instructions instead of cobr) right now.  */
-  if (S_GET_SEGMENT (fragP->fr_symbol) != segment_type)
-    {
-      relax_cobr (fragP);
-      return 4;
-    }
-
-  return md_relax_table[fragP->fr_subtype].rlx_length;
-}
-
-#if defined(OBJ_AOUT) | defined(OBJ_BOUT)
-
-/* md_ri_to_chars:
-   This routine exists in order to overcome machine byte-order problems
-   when dealing with bit-field entries in the relocation_info struct.
-
-   But relocation info will be used on the host machine only (only
-   executable code is actually downloaded to the i80960).  Therefore,
-   we leave it in host byte order.  */
-
-static void
-md_ri_to_chars (char *where, struct relocation_info *ri)
-{
-  host_number_to_chars (where, ri->r_address, 4);
-  host_number_to_chars (where + 4, ri->r_index, 3);
-#if WORDS_BIGENDIAN
-  where[7] = (ri->r_pcrel << 7
-	      | ri->r_length << 5
-	      | ri->r_extern << 4
-	      | ri->r_bsr << 3
-	      | ri->r_disp << 2
-	      | ri->r_callj << 1
-	      | ri->nuthin << 0);
-#else
-  where[7] = (ri->r_pcrel << 0
-	      | ri->r_length << 1
-	      | ri->r_extern << 3
-	      | ri->r_bsr << 4
-	      | ri->r_disp << 5
-	      | ri->r_callj << 6
-	      | ri->nuthin << 7);
-#endif
-}
-
-#endif /* defined(OBJ_AOUT) | defined(OBJ_BOUT) */
-
-
-/* brtab_emit:	generate the fetch-prediction branch table.
-
-   See the comments above the declaration of 'br_cnt' for details on
-   branch-prediction instrumentation.
-
-   The code emitted here would be functionally equivalent to the following
-   example assembler source.
-
-  			.data
-  			.align	2
-  	   BR_TAB_NAME:
-  			.word	0		# link to next table
-  			.word	3		# length of table
-  			.word	LBRANCH0	# 1st entry in table proper
-  			.word	LBRANCH1
-  			.word	LBRANCH2  */
-
-void
-brtab_emit (void)
-{
-  int i;
-  char buf[20];
-  /* Where the binary was output to.  */
-  char *p;
-
-  if (!instrument_branches)
-    return;
-
-  subseg_set (data_section, 0);	/*      .data */
-  frag_align (2, 0, 0);		/*      .align 2 */
-  record_alignment (now_seg, 2);
-  colon (BR_TAB_NAME);		/* BR_TAB_NAME: */
-  emit (0);			/*      .word 0 #link to next table */
-  emit (br_cnt);		/*      .word n #length of table */
-
-  for (i = 0; i < br_cnt; i++)
-    {
-      sprintf (buf, "%s%d", BR_LABEL_BASE, i);
-      p = emit (0);
-      fix_new (frag_now,
-	       p - frag_now->fr_literal,
-	       4, symbol_find (buf), 0, 0, NO_RELOC);
-    }
-}
-
-/* s_leafproc:	process .leafproc pseudo-op
-
-  	.leafproc takes two arguments, the second one is optional:
-  		arg[1]: name of 'call' entry point to leaf procedure
-  		arg[2]: name of 'bal' entry point to leaf procedure
-
-  	If the two arguments are identical, or if the second one is missing,
-  	the first argument is taken to be the 'bal' entry point.
-
-  	If there are 2 distinct arguments, we must make sure that the 'bal'
-  	entry point immediately follows the 'call' entry point in the linked
-  	list of symbols.  */
-
-static void
-s_leafproc (int n_ops,		/* Number of operands.  */
-	    char *args[])	/* args[1]->1st operand, args[2]->2nd operand.  */
-{
-  symbolS *callP;		/* Pointer to leafproc 'call' entry point symbol.  */
-  symbolS *balP;		/* Pointer to leafproc 'bal' entry point symbol.  */
-
-  if ((n_ops != 1) && (n_ops != 2))
-    {
-      as_bad (_("should have 1 or 2 operands"));
-      return;
-    }
-
-  /* Find or create symbol for 'call' entry point.  */
-  callP = symbol_find_or_make (args[1]);
-
-  if (TC_S_IS_CALLNAME (callP))
-    as_warn (_("Redefining leafproc %s"), S_GET_NAME (callP));
-
-  /* If that was the only argument, use it as the 'bal' entry point.
-     Otherwise, mark it as the 'call' entry point and find or create
-     another symbol for the 'bal' entry point.  */
-  if ((n_ops == 1) || !strcmp (args[1], args[2]))
-    {
-      TC_S_FORCE_TO_BALNAME (callP);
-    }
-  else
-    {
-      TC_S_FORCE_TO_CALLNAME (callP);
-
-      balP = symbol_find_or_make (args[2]);
-      if (TC_S_IS_CALLNAME (balP))
-	as_warn (_("Redefining leafproc %s"), S_GET_NAME (balP));
-
-      TC_S_FORCE_TO_BALNAME (balP);
-
-#ifndef OBJ_ELF
-      tc_set_bal_of_call (callP, balP);
-#endif
-    }
-}
-
-/* s_sysproc: process .sysproc pseudo-op
-
-   .sysproc takes two arguments:
-     arg[1]: name of entry point to system procedure
-     arg[2]: 'entry_num' (index) of system procedure in the range
-     [0,31] inclusive.
-
-   For [ab].out, we store the 'entrynum' in the 'n_other' field of
-   the symbol.  Since that entry is normally 0, we bias 'entrynum'
-   by adding 1 to it.  It must be unbiased before it is used.  */
-
-static void
-s_sysproc (int n_ops,		/* Number of operands.  */
-	   char *args[])	/* args[1]->1st operand, args[2]->2nd operand.  */
-{
-  expressionS exp;
-  symbolS *symP;
-
-  if (n_ops != 2)
-    {
-      as_bad (_("should have two operands"));
-      return;
-    }
-
-  /* Parse "entry_num" argument and check it for validity.  */
-  parse_expr (args[2], &exp);
-  if (exp.X_op != O_constant
-      || (offs (exp) < 0)
-      || (offs (exp) > 31))
-    {
-      as_bad (_("'entry_num' must be absolute number in [0,31]"));
-      return;
-    }
-
-  /* Find/make symbol and stick entry number (biased by +1) into it.  */
-  symP = symbol_find_or_make (args[1]);
-
-  if (TC_S_IS_SYSPROC (symP))
-    as_warn (_("Redefining entrynum for sysproc %s"), S_GET_NAME (symP));
-
-  TC_S_SET_SYSPROC (symP, offs (exp));	/* Encode entry number.  */
-  TC_S_FORCE_TO_SYSPROC (symP);
-}
-
-/* parse_po:	parse machine-dependent pseudo-op
-
-   This is a top-level routine for machine-dependent pseudo-ops.  It slurps
-   up the rest of the input line, breaks out the individual arguments,
-   and dispatches them to the correct handler.  */
-
-static void
-parse_po (int po_num)	/* Pseudo-op number:  currently S_LEAFPROC or S_SYSPROC.  */
-{
-  /* Pointers operands, with no embedded whitespace.
-     arg[0] unused, arg[1-3]->operands.  */
-  char *args[4];
-  int n_ops;			/* Number of operands.  */
-  char *p;			/* Pointer to beginning of unparsed argument string.  */
-  char eol;			/* Character that indicated end of line.  */
-
-  extern char is_end_of_line[];
-
-  /* Advance input pointer to end of line.  */
-  p = input_line_pointer;
-  while (!is_end_of_line[(unsigned char) *input_line_pointer])
-    input_line_pointer++;
-
-  eol = *input_line_pointer;	/* Save end-of-line char.  */
-  *input_line_pointer = '\0';	/* Terminate argument list.  */
-
-  /* Parse out operands.  */
-  n_ops = get_args (p, args);
-  if (n_ops == -1)
-    return;
-
-  /* Dispatch to correct handler.  */
-  switch (po_num)
-    {
-    case S_SYSPROC:
-      s_sysproc (n_ops, args);
-      break;
-    case S_LEAFPROC:
-      s_leafproc (n_ops, args);
-      break;
-    default:
-      BAD_CASE (po_num);
-      break;
-    }
-
-  /* Restore eol, so line numbers get updated correctly.  Base
-     assembler assumes we leave input pointer pointing at char
-     following the eol.  */
-  *input_line_pointer++ = eol;
-}
-
-/* reloc_callj:	Relocate a 'callj' instruction
-
-  	This is a "non-(GNU)-standard" machine-dependent hook.  The base
-  	assembler calls it when it decides it can relocate an address at
-  	assembly time instead of emitting a relocation directive.
-
-  	Check to see if the relocation involves a 'callj' instruction to a:
-  	    sysproc:	Replace the default 'call' instruction with a 'calls'
-  	    leafproc:	Replace the default 'call' instruction with a 'bal'.
-  	    other proc:	Do nothing.
-
-  	See b.out.h for details on the 'n_other' field in a symbol structure.
-
-   IMPORTANT!:
-  	Assumes the caller has already figured out, in the case of a leafproc,
-  	to use the 'bal' entry point, and has substituted that symbol into the
-  	passed fixup structure.  */
-
-int
-reloc_callj (fixS *fixP)  /* Relocation that can be done at assembly time.  */
-{
-  /* Points to the binary for the instruction being relocated.  */
-  char *where;
-
-  if (!fixP->fx_tcbit)
-    /* This wasn't a callj instruction in the first place.  */
-    return 0;
-
-  where = fixP->fx_frag->fr_literal + fixP->fx_where;
-
-  if (TC_S_IS_SYSPROC (fixP->fx_addsy))
-    {
-      /* Symbol is a .sysproc: replace 'call' with 'calls'.  System
-         procedure number is (other-1).  */
-      md_number_to_chars (where, CALLS | TC_S_GET_SYSPROC (fixP->fx_addsy), 4);
-
-      /* Nothing else needs to be done for this instruction.  Make
-         sure 'md_number_to_field()' will perform a no-op.  */
-      fixP->fx_bit_fixP = (bit_fixS *) 1;
-    }
-  else if (TC_S_IS_CALLNAME (fixP->fx_addsy))
-    {
-      /* Should not happen: see block comment above.  */
-      as_fatal (_("Trying to 'bal' to %s"), S_GET_NAME (fixP->fx_addsy));
-    }
-  else if (TC_S_IS_BALNAME (fixP->fx_addsy))
-    {
-      /* Replace 'call' with 'bal'; both instructions have the same
-         format, so calling code should complete relocation as if
-         nothing happened here.  */
-      md_number_to_chars (where, BAL, 4);
-    }
-  else if (TC_S_IS_BADPROC (fixP->fx_addsy))
-    as_bad (_("Looks like a proc, but can't tell what kind.\n"));
-
-  /* Otherwise Symbol is neither a sysproc nor a leafproc.  */
-  return 0;
-}
-
-/* Handle the MRI .endian pseudo-op.  */
-
-static void
-s_endian (int ignore ATTRIBUTE_UNUSED)
-{
-  char *name;
-  char c;
-
-  c = get_symbol_name (&name);
-  if (strcasecmp (name, "little") == 0)
-    ;
-  else if (strcasecmp (name, "big") == 0)
-    as_bad (_("big endian mode is not supported"));
-  else
-    as_warn (_("ignoring unrecognized .endian type `%s'"), name);
-
-  (void) restore_line_pointer (c);
-
-  demand_empty_rest_of_line ();
-}
-
-/* We have no need to default values of symbols.  */
-
-symbolS *
-md_undefined_symbol (char *name ATTRIBUTE_UNUSED)
-{
-  return 0;
-}
-
-/* Exactly what point is a PC-relative offset relative TO?
-   On the i960, they're relative to the address of the instruction,
-   which we have set up as the address of the fixup too.  */
-long
-md_pcrel_from (fixS *fixP)
-{
-  return fixP->fx_where + fixP->fx_frag->fr_address;
-}
-
-void
-md_apply_fix (fixS *fixP,
-	       valueT *valP,
-	       segT seg ATTRIBUTE_UNUSED)
-{
-  long val = *valP;
-  char *place = fixP->fx_where + fixP->fx_frag->fr_literal;
-
-  if (!fixP->fx_bit_fixP)
-    {
-      md_number_to_imm (place, val, fixP->fx_size);
-    }
-  else if ((int) (size_t) fixP->fx_bit_fixP == 13
-	   && fixP->fx_addsy != NULL
-	   && S_GET_SEGMENT (fixP->fx_addsy) == undefined_section)
-    {
-      /* This is a COBR instruction.  They have only a
-	 13-bit displacement and are only to be used
-	 for local branches: flag as error, don't generate
-	 relocation.  */
-      as_bad_where (fixP->fx_file, fixP->fx_line,
-		    _("can't use COBR format with external label"));
-      fixP->fx_addsy = NULL;
-    }
-  else
-    md_number_to_field (place, val, fixP->fx_bit_fixP);
-
-  if (fixP->fx_addsy == NULL)
-    fixP->fx_done = 1;
-}
-
-#if defined(OBJ_AOUT) | defined(OBJ_BOUT)
-void
-tc_bout_fix_to_chars (char *where,
-		      fixS *fixP,
-		      relax_addressT segment_address_in_file)
-{
-  static const unsigned char nbytes_r_length[] = {42, 0, 1, 42, 2};
-  struct relocation_info ri;
-  symbolS *symbolP;
-
-  memset ((char *) &ri, '\0', sizeof (ri));
-  symbolP = fixP->fx_addsy;
-  know (symbolP != 0 || fixP->fx_r_type != NO_RELOC);
-  ri.r_bsr = fixP->fx_bsr;	/*SAC LD RELAX HACK */
-  /* These two 'cuz of NS32K */
-  ri.r_callj = fixP->fx_tcbit;
-  if (fixP->fx_bit_fixP)
-    ri.r_length = 2;
-  else
-    ri.r_length = nbytes_r_length[fixP->fx_size];
-  ri.r_pcrel = fixP->fx_pcrel;
-  ri.r_address = fixP->fx_frag->fr_address + fixP->fx_where - segment_address_in_file;
-
-  if (fixP->fx_r_type != NO_RELOC)
-    {
-      switch (fixP->fx_r_type)
-	{
-	case rs_align:
-	  ri.r_index = -2;
-	  ri.r_pcrel = 1;
-	  ri.r_length = fixP->fx_size - 1;
-	  break;
-	case rs_org:
-	  ri.r_index = -2;
-	  ri.r_pcrel = 0;
-	  break;
-	case rs_fill:
-	  ri.r_index = -1;
-	  break;
-	default:
-	  abort ();
-	}
-      ri.r_extern = 0;
-    }
-  else if (linkrelax || !S_IS_DEFINED (symbolP) || fixP->fx_bsr)
-    {
-      ri.r_extern = 1;
-      ri.r_index = symbolP->sy_number;
-    }
-  else
-    {
-      ri.r_extern = 0;
-      ri.r_index = S_GET_TYPE (symbolP);
-    }
-
-  /* Output the relocation information in machine-dependent form.  */
-  md_ri_to_chars (where, &ri);
-}
-
-#endif /* OBJ_AOUT or OBJ_BOUT */
-
-/* Align an address by rounding it up to the specified boundary.  */
-
-valueT
-md_section_align (segT seg,
-		  valueT addr)		/* Address to be rounded up.  */
-{
-  int align;
-
-  align = bfd_get_section_alignment (stdoutput, seg);
-  return (addr + (1 << align) - 1) & -(1 << align);
-}
-
-extern int coff_flags;
-
-/* For aout or bout, the bal immediately follows the call.
-
-   For coff, we cheat and store a pointer to the bal symbol in the
-   second aux entry of the call.  */
-
-#undef OBJ_ABOUT
-#ifdef OBJ_AOUT
-#define OBJ_ABOUT
-#endif
-#ifdef OBJ_BOUT
-#define OBJ_ABOUT
-#endif
-
-void
-tc_set_bal_of_call (symbolS *callP ATTRIBUTE_UNUSED,
-		    symbolS *balP ATTRIBUTE_UNUSED)
-{
-  know (TC_S_IS_CALLNAME (callP));
-  know (TC_S_IS_BALNAME (balP));
-
-#ifdef OBJ_COFF
-
-  callP->sy_tc = balP;
-  S_SET_NUMBER_AUXILIARY (callP, 2);
-
-#else /* ! OBJ_COFF */
-#ifdef OBJ_ABOUT
-
-  /* If the 'bal' entry doesn't immediately follow the 'call'
-     symbol, unlink it from the symbol list and re-insert it.  */
-  if (symbol_next (callP) != balP)
-    {
-      symbol_remove (balP, &symbol_rootP, &symbol_lastP);
-      symbol_append (balP, callP, &symbol_rootP, &symbol_lastP);
-    }				/* if not in order */
-
-#else /* ! OBJ_ABOUT */
-  as_fatal ("Only supported for a.out, b.out, or COFF");
-#endif /* ! OBJ_ABOUT */
-#endif /* ! OBJ_COFF */
-}
-
-symbolS *
-tc_get_bal_of_call (symbolS *callP ATTRIBUTE_UNUSED)
-{
-  symbolS *retval;
-
-  know (TC_S_IS_CALLNAME (callP));
-
-#ifdef OBJ_COFF
-  retval = callP->sy_tc;
-#else
-#ifdef OBJ_ABOUT
-  retval = symbol_next (callP);
-#else
-  as_fatal ("Only supported for a.out, b.out, or COFF");
-#endif /* ! OBJ_ABOUT */
-#endif /* ! OBJ_COFF */
-
-  know (TC_S_IS_BALNAME (retval));
-  return retval;
-}
-
-#ifdef OBJ_COFF
-void
-tc_coff_symbol_emit_hook (symbolS *symbolP ATTRIBUTE_UNUSED)
-{
-  if (TC_S_IS_CALLNAME (symbolP))
-    {
-      symbolS *balP = tc_get_bal_of_call (symbolP);
-
-      symbolP->sy_symbol.ost_auxent[1].x_bal.x_balntry = S_GET_VALUE (balP);
-      if (S_GET_STORAGE_CLASS (symbolP) == C_EXT)
-	S_SET_STORAGE_CLASS (symbolP, C_LEAFEXT);
-      else
-	S_SET_STORAGE_CLASS (symbolP, C_LEAFSTAT);
-      S_SET_DATA_TYPE (symbolP, S_GET_DATA_TYPE (symbolP) | (DT_FCN << N_BTSHFT));
-      /* Fix up the bal symbol.  */
-      S_SET_STORAGE_CLASS (balP, C_LABEL);
-    }
-}
-#endif /* OBJ_COFF */
-
-void
-i960_handle_align (fragS *fragp ATTRIBUTE_UNUSED)
-{
-  if (!linkrelax)
-    return;
-
-#ifndef OBJ_BOUT
-  as_bad (_("option --link-relax is only supported in b.out format"));
-  linkrelax = 0;
-  return;
-#else
-
-  /* The text section "ends" with another alignment reloc, to which we
-     aren't adding padding.  */
-  if (fragp->fr_next == text_last_frag
-      || fragp->fr_next == data_last_frag)
-    return;
-
-  /* alignment directive */
-  fix_new (fragp, fragp->fr_fix, fragp->fr_offset, 0, 0, 0,
-	   (int) fragp->fr_type);
-#endif /* OBJ_BOUT */
-}
-
-int
-i960_validate_fix (fixS *fixP, segT this_segment_type ATTRIBUTE_UNUSED)
-{
-  if (fixP->fx_tcbit && TC_S_IS_CALLNAME (fixP->fx_addsy))
-    {
-      /* Relocation should be done via the associated 'bal'
-         entry point symbol.  */
-      if (!TC_S_IS_BALNAME (tc_get_bal_of_call (fixP->fx_addsy)))
-	{
-	  as_bad_where (fixP->fx_file, fixP->fx_line,
-			_("No 'bal' entry point for leafproc %s"),
-			S_GET_NAME (fixP->fx_addsy));
-	  return 0;
-	}
-      fixP->fx_addsy = tc_get_bal_of_call (fixP->fx_addsy);
-    }
-
-  return 1;
-}
-
-/* From cgen.c:  */
-
-static short
-tc_bfd_fix2rtype (fixS *fixP)
-{
-  if (fixP->fx_pcrel == 0 && fixP->fx_size == 4)
-    return BFD_RELOC_32;
-
-  if (fixP->fx_pcrel != 0 && fixP->fx_size == 4)
-    return BFD_RELOC_24_PCREL;
-
-  abort ();
-  return 0;
-}
-
-/* Translate internal representation of relocation info to BFD target
-   format.
-
-   FIXME: To what extent can we get all relevant targets to use this?  */
-
-arelent *
-tc_gen_reloc (asection *section ATTRIBUTE_UNUSED, fixS *fixP)
-{
-  arelent * reloc;
-
-  reloc = XNEW (arelent);
-
-  /* HACK: Is this right?  */
-  fixP->fx_r_type = tc_bfd_fix2rtype (fixP);
-
-  reloc->howto = bfd_reloc_type_lookup (stdoutput, fixP->fx_r_type);
-  if (reloc->howto == NULL)
-    {
-      as_bad_where (fixP->fx_file, fixP->fx_line,
-		    _("internal error: can't export reloc type %d (`%s')"),
-		    fixP->fx_r_type,
-		    bfd_get_reloc_code_name (fixP->fx_r_type));
-      return NULL;
-    }
-
-  gas_assert (!fixP->fx_pcrel == !reloc->howto->pc_relative);
-
-  reloc->sym_ptr_ptr = XNEW (asymbol *);
-  *reloc->sym_ptr_ptr = symbol_get_bfdsym (fixP->fx_addsy);
-  reloc->address = fixP->fx_frag->fr_address + fixP->fx_where;
-  reloc->addend = fixP->fx_addnumber;
-
-  return reloc;
-}
-
-/* end from cgen.c */
-
-const pseudo_typeS md_pseudo_table[] =
-{
-  {"bss", s_lcomm, 1},
-  {"endian", s_endian, 0},
-  {"extended", float_cons, 't'},
-  {"leafproc", parse_po, S_LEAFPROC},
-  {"sysproc", parse_po, S_SYSPROC},
-
-  {"word", cons, 4},
-  {"quad", cons, 16},
-
-  {0, 0, 0}
-};
diff --git a/gas/config/tc-i960.h b/gas/config/tc-i960.h
deleted file mode 100644
index 9c71150..0000000
--- a/gas/config/tc-i960.h
+++ /dev/null
@@ -1,185 +0,0 @@
-/* tc-i960.h - Basic 80960 instruction formats.
-   Copyright (C) 1989-2018 Free Software Foundation, Inc.
-
-   This file is part of GAS, the GNU Assembler.
-
-   GAS is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as
-   published by the Free Software Foundation; either version 3,
-   or (at your option) any later version.
-
-   GAS is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-   the GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with GAS; see the file COPYING.  If not, write to the Free
-   Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
-   02110-1301, USA.  */
-
-#ifndef TC_I960
-#define TC_I960 1
-
-#ifdef OBJ_ELF
-#define TARGET_FORMAT "elf32-i960"
-#define TARGET_ARCH bfd_arch_i960
-#endif
-
-#define TARGET_BYTES_BIG_ENDIAN 0
-
-#define WORKING_DOT_WORD
-
-/*
- * The 'COJ' instructions are actually COBR instructions with the 'b' in
- * the mnemonic replaced by a 'j';  they are ALWAYS "de-optimized" if necessary:
- * if the displacement will not fit in 13 bits, the assembler will replace them
- * with the corresponding compare and branch instructions.
- *
- * All of the 'MEMn' instructions are the same format; the 'n' in the name
- * indicates the default index scale factor (the size of the datum operated on).
- *
- * The FBRA formats are not actually an instruction format.  They are the
- * "convenience directives" for branching on floating-point comparisons,
- * each of which generates 2 instructions (a 'bno' and one other branch).
- *
- * The CALLJ format is not actually an instruction format.  It indicates that
- * the instruction generated (a CTRL-format 'call') should have its relocation
- * specially flagged for link-time replacement with a 'bal' or 'calls' if
- * appropriate.
- */
-
-/* tailor gas */
-#define LOCAL_LABELS_FB 1
-#define BITFIELD_CONS_EXPRESSIONS
-
-/* tailor the coff format */
-#define COFF_MAGIC				I960ROMAGIC
-#define OBJ_COFF_MAX_AUXENTRIES			(2)
-
-/* MEANING OF 'n_other' in the symbol record.
- *
- * If non-zero, the 'n_other' fields indicates either a leaf procedure or
- * a system procedure, as follows:
- *
- *	1 <= n_other <= 32 :
- *		The symbol is the entry point to a system procedure.
- *		'n_value' is the address of the entry, as for any other
- *		procedure.  The system procedure number (which can be used in
- *		a 'calls' instruction) is (n_other-1).  These entries come from
- *		'.sysproc' directives.
- *
- *	n_other == N_CALLNAME
- *		the symbol is the 'call' entry point to a leaf procedure.
- *		The *next* symbol in the symbol table must be the corresponding
- *		'bal' entry point to the procedure (see following).  These
- *		entries come from '.leafproc' directives in which two different
- *		symbols are specified (the first one is represented here).
- *
- *
- *	n_other == N_BALNAME
- *		the symbol is the 'bal' entry point to a leaf procedure.
- *		These entries result from '.leafproc' directives in which only
- *		one symbol is specified, or in which the same symbol is
- *		specified twice.
- *
- * Note that an N_CALLNAME entry *must* have a corresponding N_BALNAME entry,
- * but not every N_BALNAME entry must have an N_CALLNAME entry.
- */
-#define	N_CALLNAME	((char)-1)
-#define	N_BALNAME	((char)-2)
-
-/* i960 uses a custom relocation record.  */
-
-/* let obj-aout.h know */
-#define CUSTOM_RELOC_FORMAT 1
-/* let aout_gnu.h know */
-#define N_RELOCATION_INFO_DECLARED 1
-struct relocation_info
-  {
-    int r_address;		/* File address of item to be relocated	*/
-    unsigned
-      r_index:24,		/* Index of symbol on which relocation is based*/
-      r_pcrel:1,		/* 1 => relocate PC-relative; else absolute
-				 *	On i960, pc-relative implies 24-bit
-				 *	address, absolute implies 32-bit.
-				 */
-      r_length:2,		/* Number of bytes to relocate:
-				 *	0 => 1 byte
-				 *	1 => 2 bytes
-				 *	2 => 4 bytes -- only value used for i960
-				 */
-      r_extern:1, r_bsr:1,	/* Something for the GNU NS32K assembler */
-      r_disp:1,			/* Something for the GNU NS32K assembler */
-      r_callj:1,		/* 1 if relocation target is an i960 'callj' */
-      nuthin:1;			/* Unused				*/
-  };
-
-/* No shared lib support, so we don't need to ensure externally
-   visible symbols can be overridden.  */
-#define EXTERN_FORCE_RELOC 0
-
-/* Makes no sense to use the difference of 2 arbitrary symbols
-   as the target of a call instruction.  */
-#define TC_FORCE_RELOCATION_SUB_SAME(FIX, SEG)	\
-  (GENERIC_FORCE_RELOCATION_SUB_SAME (FIX, SEG)	\
-   || (FIX)->fx_tcbit				\
-   || TC_FORCE_RELOCATION (FIX))
-
-/* reloc_callj() may replace a 'call' with a 'calls' or a
-   'bal', in which cases it modifies *fixP as appropriate.
-   In the case of a 'calls', no further work is required.  */
-extern int reloc_callj (struct fix *);
-
-#define TC_FORCE_RELOCATION_ABS(FIX)		\
-  (TC_FORCE_RELOCATION (FIX)			\
-   || reloc_callj (FIX))
-
-#define TC_FORCE_RELOCATION_LOCAL(FIX)		\
-  (GENERIC_FORCE_RELOCATION_LOCAL (FIX)		\
-   || reloc_callj (FIX))
-
-#ifdef OBJ_COFF
-
-/* We store the bal information in the sy_tc field.  */
-#define TC_SYMFIELD_TYPE symbolS *
-
-#endif
-
-extern int i960_validate_fix (struct fix *, segT);
-#define TC_VALIDATE_FIX(FIX,SEGTYPE,LABEL) \
-	if (!i960_validate_fix (FIX, SEGTYPE)) goto LABEL
-
-#define tc_fix_adjustable(FIX)		((FIX)->fx_bsr == 0)
-
-#ifndef OBJ_ELF
-/* Values passed to md_apply_fix sometimes include symbol values.  */
-#define MD_APPLY_SYM_VALUE(FIX) tc_fix_adjustable (FIX)
-#else
-/* Values passed to md_apply_fix don't include the symbol value.  */
-#define MD_APPLY_SYM_VALUE(FIX) 0
-#endif
-
-extern void brtab_emit (void);
-#define md_end()	brtab_emit ()
-
-extern void tc_set_bal_of_call (symbolS *, symbolS *);
-
-extern struct symbol *tc_get_bal_of_call (symbolS *);
-
-extern void i960_handle_align (struct frag *);
-#define HANDLE_ALIGN(FRAG)	i960_handle_align (FRAG)
-#define NO_RELOC -1
-
-#define md_operand(x)
-
-extern const struct relax_type md_relax_table[];
-#define TC_GENERIC_RELAX_TABLE md_relax_table
-
-#define LINKER_RELAXING_SHRINKS_ONLY
-
-#define TC_FIX_TYPE struct { unsigned bsr : 1; }
-#define fx_bsr tc_fix_data.bsr
-#define TC_INIT_FIX_DATA(F)	((F)->tc_fix_data.bsr = 0)
-
-#endif
diff --git a/gas/config/tc-m68k.c b/gas/config/tc-m68k.c
index 13fb897..d73d154 100644
--- a/gas/config/tc-m68k.c
+++ b/gas/config/tc-m68k.c
@@ -5405,7 +5405,7 @@ md_estimate_size_before_relax (fragS *fragP, segT segment)
   return md_relax_table[fragP->fr_subtype].rlx_length;
 }
 
-#if defined(OBJ_AOUT) | defined(OBJ_BOUT)
+#if defined(OBJ_AOUT)
 /* the bit-field entries in the relocation_info struct plays hell
    with the byte-order problems of cross-assembly.  So as a hack,
    I added this mach. dependent ri twiddler.  Ugly, but it gets
@@ -5433,7 +5433,7 @@ md_ri_to_chars (char *the_bytes, struct reloc_info_generic *ri)
 
 #endif
 
-#endif /* OBJ_AOUT or OBJ_BOUT */
+#endif /* OBJ_AOUT */
 
 #ifndef WORKING_DOT_WORD
 int md_short_jump_size = 4;
diff --git a/gas/config/tc-score.c b/gas/config/tc-score.c
index 146e86a..8b587c8 100644
--- a/gas/config/tc-score.c
+++ b/gas/config/tc-score.c
@@ -6217,8 +6217,7 @@ s3_s_score_lcomm (int bytes_p)
   *p = c;
 
   if (
-#if (defined (OBJ_AOUT) || defined (OBJ_MAYBE_AOUT)	\
-     || defined (OBJ_BOUT) || defined (OBJ_MAYBE_BOUT))
+#if (defined (OBJ_AOUT) || defined (OBJ_MAYBE_AOUT))
 #ifdef BFD_ASSEMBLER
       (OUTPUT_FLAVOR != bfd_target_aout_flavour
        || (S_GET_OTHER (symbolP) == 0 && S_GET_DESC (symbolP) == 0)) &&
diff --git a/gas/config/tc-score7.c b/gas/config/tc-score7.c
index 9cd6602..12271a3 100644
--- a/gas/config/tc-score7.c
+++ b/gas/config/tc-score7.c
@@ -6077,8 +6077,7 @@ s7_s_score_lcomm (int bytes_p)
   *p = c;
 
   if (
-#if (defined (OBJ_AOUT) || defined (OBJ_MAYBE_AOUT) \
-     || defined (OBJ_BOUT) || defined (OBJ_MAYBE_BOUT))
+#if (defined (OBJ_AOUT) || defined (OBJ_MAYBE_AOUT))
 #ifdef BFD_ASSEMBLER
        (OUTPUT_FLAVOR != bfd_target_aout_flavour
         || (S_GET_OTHER (symbolP) == 0 && S_GET_DESC (symbolP) == 0)) &&
diff --git a/gas/config/tc-sparc.c b/gas/config/tc-sparc.c
index c21192a..1994452 100644
--- a/gas/config/tc-sparc.c
+++ b/gas/config/tc-sparc.c
@@ -365,10 +365,6 @@ sparc_target_format (void)
 #endif
 #endif
 
-#ifdef OBJ_BOUT
-  return "b.out.big";
-#endif
-
 #ifdef OBJ_COFF
 #ifdef TE_LYNX
   return "coff-sparc-lynx";
diff --git a/gas/configure b/gas/configure
index 0504104..a4393b5 100755
--- a/gas/configure
+++ b/gas/configure
@@ -11936,7 +11936,7 @@ case "${host}" in
 esac
 
 
-#We need this for the host.  BOUT header is in host order.
+#We need this for the host.
  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether byte ordering is bigendian" >&5
 $as_echo_n "checking whether byte ordering is bigendian... " >&6; }
 if test "${ac_cv_c_bigendian+set}" = set; then :
@@ -12250,11 +12250,6 @@ $as_echo "#define STRICTCOFF 1" >>confdefs.h
 	fi
 	;;
 
-      i860-*-*)
-	{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: GAS support for ${generic_target} is preliminary and a work in progress" >&5
-$as_echo "$as_me: WARNING: GAS support for ${generic_target} is preliminary and a work in progress" >&2;}
-	;;
-
       microblaze*)
         ;;
 
@@ -12863,9 +12858,6 @@ if test `set . $formats ; shift ; echo $#` -gt 1 ; then
       aout)
 $as_echo "#define OBJ_MAYBE_AOUT 1" >>confdefs.h
    ;;
-      bout)
-$as_echo "#define OBJ_MAYBE_BOUT 1" >>confdefs.h
-   ;;
       coff)
 $as_echo "#define OBJ_MAYBE_COFF 1" >>confdefs.h
     ;;
diff --git a/gas/configure.ac b/gas/configure.ac
index 3b0279a..2c4e3eb 100644
--- a/gas/configure.ac
+++ b/gas/configure.ac
@@ -141,7 +141,7 @@ case "${host}" in
 esac
 AC_SUBST(GDBINIT)
 
-#We need this for the host.  BOUT header is in host order.
+#We need this for the host.
 AC_C_BIGENDIAN
 
 te_file=generic
@@ -213,10 +213,6 @@ for this_target in $target $canon_targets ; do
 	fi
 	;;
 
-      i860-*-*)
-	AC_MSG_WARN(GAS support for ${generic_target} is preliminary and a work in progress)
-	;;
-
       microblaze*)
         ;;
 
@@ -737,7 +733,6 @@ if test `set . $formats ; shift ; echo $#` -gt 1 ; then
   for fmt in $formats ; do
     case $fmt in
       aout)	AC_DEFINE(OBJ_MAYBE_AOUT, 1,    [a.out support?])   ;;
-      bout)	AC_DEFINE(OBJ_MAYBE_BOUT, 1,    [b.out support?])   ;;
       coff)	AC_DEFINE(OBJ_MAYBE_COFF, 1,    [COFF support?])    ;;
       ecoff)	AC_DEFINE(OBJ_MAYBE_ECOFF, 1,   [ECOFF support?])   ;;
       elf)	AC_DEFINE(OBJ_MAYBE_ELF, 1,     [ELF support?])     ;;
diff --git a/gas/configure.tgt b/gas/configure.tgt
index 6455fbb..0f5626b 100644
--- a/gas/configure.tgt
+++ b/gas/configure.tgt
@@ -292,10 +292,6 @@ case ${generic_target} in
   i386-*-rdos*)				fmt=elf ;;
   i386-*-darwin*)			fmt=macho ;;
 
-  i860-*-*)				fmt=elf endian=little ;;
-
-  i960-*-elf*)				fmt=elf ;;
-
   ia16-*-elf*)				fmt=elf ;;
 
   ia64-*-elf*)				fmt=elf ;;
diff --git a/gas/doc/Makefile.am b/gas/doc/Makefile.am
index 1faf805..aee70dd 100644
--- a/gas/doc/Makefile.am
+++ b/gas/doc/Makefile.am
@@ -60,8 +60,6 @@ CPU_DOCS = \
 	c-hppa.texi \
 	c-i370.texi \
 	c-i386.texi \
-	c-i860.texi \
-	c-i960.texi \
 	c-ip2k.texi \
 	c-lm32.texi \
 	c-m32c.texi \
diff --git a/gas/doc/Makefile.in b/gas/doc/Makefile.in
index 5de99b3..8939093 100644
--- a/gas/doc/Makefile.in
+++ b/gas/doc/Makefile.in
@@ -335,8 +335,6 @@ CPU_DOCS = \
 	c-hppa.texi \
 	c-i370.texi \
 	c-i386.texi \
-	c-i860.texi \
-	c-i960.texi \
 	c-ip2k.texi \
 	c-lm32.texi \
 	c-m32c.texi \
diff --git a/gas/doc/all.texi b/gas/doc/all.texi
index d3d3719..47d55df 100644
--- a/gas/doc/all.texi
+++ b/gas/doc/all.texi
@@ -39,8 +39,6 @@
 @set HPPA
 @set I370
 @set I80386
-@set I860
-@set I960
 @set IA64
 @set IP2K
 @set LM32
diff --git a/gas/doc/as.texinfo b/gas/doc/as.texinfo
index 43286e9..dfd436f 100644
--- a/gas/doc/as.texinfo
+++ b/gas/doc/as.texinfo
@@ -32,7 +32,7 @@
 @set COFF-ELF
 @end ifset
 @ifset AOUT
-@set aout-bout
+@set aout
 @end ifset
 @ifset ARM/Thumb
 @set ARM
@@ -40,9 +40,6 @@
 @ifset Blackfin
 @set Blackfin
 @end ifset
-@ifset BOUT
-@set aout-bout
-@end ifset
 @ifset H8/300
 @set H8
 @end ifset
@@ -337,14 +334,6 @@ gcc(1), ld(1), and the Info entries for @file{binutils} and @file{ld}.
    [@b{--32}|@b{--x32}|@b{--64}] [@b{-n}]
    [@b{-march}=@var{CPU}[+@var{EXTENSION}@dots{}]] [@b{-mtune}=@var{CPU}]
 @end ifset
-@ifset I960
-
-@emph{Target i960 options:}
-@c see md_parse_option in tc-i960.c
-   [@b{-ACA}|@b{-ACA_A}|@b{-ACB}|@b{-ACC}|@b{-AKA}|@b{-AKB}|
-    @b{-AKC}|@b{-AMC}]
-   [@b{-b}] [@b{-no-relax}]
-@end ifset
 @ifset IA64
 
 @emph{Target IA-64 options:}
@@ -1069,24 +1058,6 @@ an i386 processor.
 @end ifset
 
 @c man begin OPTIONS
-@ifset I960
-The following options are available when @value{AS} is configured for the
-Intel 80960 processor.
-
-@table @gcctabopt
-@item -ACA | -ACA_A | -ACB | -ACC | -AKA | -AKB | -AKC | -AMC
-Specify which variant of the 960 architecture is the target.
-
-@item -b
-Add code to collect statistics about branches taken.
-
-@item -no-relax
-Do not alter compare-and-branch instructions for long displacements;
-error if necessary.
-
-@end table
-@end ifset
-
 @ifset IP2K
 The following options are available when @value{AS} is configured for the
 Ubicom IP2K series.
@@ -1995,10 +1966,6 @@ For the @value{TARGET} target, @command{@value{AS}} is configured to produce
 @value{OBJ-NAME} format object files.
 @end ifclear
 @c The following should exhaust all configs that set MULTI-OBJ, ideally
-@ifset I960
-On the @value{TARGET}, @command{@value{AS}} can be configured to produce either
-@code{b.out} or COFF format object files.
-@end ifset
 @ifset HPPA
 On the @value{TARGET}, @command{@value{AS}} can be configured to produce either
 SOM or ELF format object files.
@@ -2104,16 +2071,7 @@ is itself synthesized from other files.  @command{@value{AS}} understands the
 @kindex .o
 Every time you run @command{@value{AS}} it produces an output file, which is
 your assembly language program translated into numbers.  This file
-is the object file.  Its default name is
-@ifclear BOUT
-@code{a.out}.
-@end ifclear
-@ifset BOUT
-@ifset GENERIC
-@code{a.out}, or
-@end ifset
-@code{b.out} when @command{@value{AS}} is configured for the Intel 80960.
-@end ifset
+is the object file.  Its default name is @code{a.out}.
 You can give it another name by using the @option{-o} option.  Conventionally,
 object file names end with @file{.o}.  The default name is used for historical
 reasons: older assemblers were capable of assembling self-contained programs
@@ -2447,8 +2405,8 @@ displayed for a given single line of source input.  The default value is 4.
 @cindex MRI compatibility mode
 The @option{-M} or @option{--mri} option selects MRI compatibility mode.  This
 changes the syntax and pseudo-op handling of @command{@value{AS}} to make it
-compatible with the @code{ASM68K} or the @code{ASM960} (depending upon the
-configured target) assembler from Microtec Research.  The exact nature of the
+compatible with the @code{ASM68K} assembler from Microtec Research.
+The exact nature of the
 MRI syntax will not be documented here; see the MRI manuals for more
 information.  Note in particular that the handling of macros and macro
 arguments is somewhat different.  The purpose of this option is to permit
@@ -2545,30 +2503,6 @@ The m68k @code{OPT} @code{D} option is the default, unlike the MRI assembler.
 
 The m68k @code{XREF} pseudo-op is ignored.
 
-@item @code{.debug} pseudo-op
-
-The i960 @code{.debug} pseudo-op is not supported.
-
-@item @code{.extended} pseudo-op
-
-The i960 @code{.extended} pseudo-op is not supported.
-
-@item @code{.list} pseudo-op.
-
-The various options of the i960 @code{.list} pseudo-op are not supported.
-
-@item @code{.optimize} pseudo-op
-
-The i960 @code{.optimize} pseudo-op is not supported.
-
-@item @code{.output} pseudo-op
-
-The i960 @code{.output} pseudo-op is not supported.
-
-@item @code{.setreal} pseudo-op
-
-The i960 @code{.setreal} pseudo-op is not supported.
-
 @end itemize
 
 @node MD
@@ -2602,23 +2536,7 @@ disable this behaviour.
 @cindex naming object file
 @cindex object file name
 There is always one object file output when you run @command{@value{AS}}.  By
-default it has the name
-@ifset GENERIC
-@ifset I960
-@file{a.out} (or @file{b.out}, for Intel 960 targets only).
-@end ifset
-@ifclear I960
-@file{a.out}.
-@end ifclear
-@end ifset
-@ifclear GENERIC
-@ifset I960
-@file{b.out}.
-@end ifset
-@ifclear I960
-@file{a.out}.
-@end ifclear
-@end ifclear
+default it has the name @file{a.out}.
 You use this option (which takes exactly one filename) to give the
 object file a different name.
 
@@ -3153,9 +3071,6 @@ are floating point numbers, described below.
 * Bignums::                     Bignums
 * Flonums::                     Flonums
 @ifclear GENERIC
-@ifset I960
-* Bit Fields::                  Bit Fields
-@end ifset
 @end ifclear
 @end menu
 
@@ -3230,16 +3145,12 @@ A letter, to tell @command{@value{AS}} the rest of the number is a flonum.
 4.2 assembler seems to allow any of @samp{defghDEFGH}.)
 @end ignore
 
-On the H8/300, Renesas / SuperH SH,
-and AMD 29K architectures, the letter must be
+On the H8/300 and Renesas / SuperH SH architectures, the letter must be
 one of the letters @samp{DFPRSX} (in upper or lower case).
 
 On the ARC, the letter must be one of the letters @samp{DFRS}
 (in upper or lower case).
 
-On the Intel 960 architecture, the letter must be
-one of the letters @samp{DFT} (in upper or lower case).
-
 On the HPPA architecture, the letter must be @samp{E} (upper case only).
 @end ifset
 @ifclear GENERIC
@@ -3252,9 +3163,6 @@ One of the letters @samp{DFPRSX} (in upper or lower case).
 @ifset HPPA
 The letter @samp{E} (upper case only).
 @end ifset
-@ifset I960
-One of the letters @samp{DFT} (in upper or lower case).
-@end ifset
 @end ifclear
 
 @item
@@ -3290,41 +3198,6 @@ present.  The floating point number has the usual base-10 value.
 independently of any floating point hardware in the computer running
 @command{@value{AS}}.
 
-@ifclear GENERIC
-@ifset I960
-@c Bit fields are written as a general facility but are also controlled
-@c by a conditional-compilation flag---which is as of now (21mar91)
-@c turned on only by the i960 config of GAS.
-@node Bit Fields
-@subsubsection Bit Fields
-
-@cindex bit fields
-@cindex constants, bit field
-You can also define numeric constants as @dfn{bit fields}.
-Specify two numbers separated by a colon---
-@example
-@var{mask}:@var{value}
-@end example
-@noindent
-@command{@value{AS}} applies a bitwise @sc{and} between @var{mask} and
-@var{value}.
-
-The resulting number is then packed
-@ifset GENERIC
-@c this conditional paren in case bit fields turned on elsewhere than 960
-(in host-dependent byte order)
-@end ifset
-into a field whose width depends on which assembler directive has the
-bit-field as its argument.  Overflow (a result from the bitwise and
-requiring more binary digits to represent) is not an error; instead,
-more constants are generated, of the specified width, beginning with the
-least significant digits.@refill
-
-The directives @code{.byte}, @code{.hword}, @code{.int}, @code{.long},
-@code{.short}, and @code{.word} accept bit-field arguments.
-@end ifset
-@end ifclear
-
 @node Sections
 @chapter Sections and Relocation
 @cindex sections
@@ -3486,7 +3359,7 @@ use of @command{@value{AS}} and have no meaning except during assembly.
 @cindex sections, named
 @item named sections
 @end ifset
-@ifset aout-bout
+@ifset aout
 @cindex text section
 @cindex data section
 @itemx text section
@@ -3495,7 +3368,7 @@ use of @command{@value{AS}} and have no meaning except during assembly.
 These sections hold your program.  @command{@value{AS}} and @code{@value{LD}} treat them as
 separate but equal sections.  Anything you can say of one section is
 true of another.
-@c @ifset aout-bout
+@c @ifset aout
 When the program is running, however, it is
 customary for the text section to be unalterable.  The
 text section is often shared among processes: it contains
@@ -3615,7 +3488,7 @@ it in the expr section.
 
 @cindex numbered subsections
 @cindex grouping data
-@ifset aout-bout
+@ifset aout
 Assembled bytes
 @ifset COFF-ELF
 conventionally
@@ -3627,10 +3500,10 @@ You may have separate groups of
 data in named sections
 @end ifset
 @ifclear GENERIC
-@ifclear aout-bout
+@ifclear aout
 data in named sections
 @end ifclear
-@ifset aout-bout
+@ifset aout
 text or data
 @end ifset
 @end ifclear
@@ -3659,14 +3532,6 @@ On the H8/300 platform, each subsection is zero-padded to a word
 boundary (two bytes).
 The same is true on the Renesas SH.
 @end ifset
-@ifset I960
-@c FIXME section padding (alignment)?
-@c Rich Pixley says padding here depends on target obj code format; that
-@c doesn't seem particularly useful to say without further elaboration,
-@c so for now I say nothing about it.  If this is a generic BFD issue,
-@c these paragraphs might need to vanish from this manual, and be
-@c discussed in BFD chapter of binutils (or some such).
-@end ifset
 @end ifclear
 
 Subsections appear in your object file in numeric order, lowest numbered
@@ -3990,19 +3855,9 @@ would want.
 @menu
 * Symbol Value::                Value
 * Symbol Type::                 Type
-@ifset aout-bout
-@ifset GENERIC
+@ifset aout
 * a.out Symbols::               Symbol Attributes: @code{a.out}
 @end ifset
-@ifclear GENERIC
-@ifclear BOUT
-* a.out Symbols::               Symbol Attributes: @code{a.out}
-@end ifclear
-@ifset BOUT
-* a.out Symbols::               Symbol Attributes: @code{a.out}, @code{b.out}
-@end ifset
-@end ifclear
-@end ifset
 @ifset COFF
 * COFF Symbols::                Symbol Attributes for COFF
 @end ifset
@@ -4043,39 +3898,13 @@ information, any flag settings indicating that a symbol is external, and
 (optionally), other information for linkers and debuggers.  The exact
 format depends on the object-code output format in use.
 
-@ifset aout-bout
-@ifclear GENERIC
-@ifset BOUT
-@c The following avoids a "widow" subsection title.  @group would be
-@c better if it were available outside examples.
-@need 1000
-@node a.out Symbols
-@subsection Symbol Attributes: @code{a.out}, @code{b.out}
-
-@cindex @code{b.out} symbol attributes
-@cindex symbol attributes, @code{b.out}
-These symbol attributes appear only when @command{@value{AS}} is configured for
-one of the Berkeley-descended object output formats---@code{a.out} or
-@code{b.out}.
-
-@end ifset
-@ifclear BOUT
-@node a.out Symbols
-@subsection Symbol Attributes: @code{a.out}
-
-@cindex @code{a.out} symbol attributes
-@cindex symbol attributes, @code{a.out}
-
-@end ifclear
-@end ifclear
-@ifset GENERIC
+@ifset aout
 @node a.out Symbols
 @subsection Symbol Attributes: @code{a.out}
 
 @cindex @code{a.out} symbol attributes
 @cindex symbol attributes, @code{a.out}
 
-@end ifset
 @menu
 * Symbol Desc::                 Descriptor
 * Symbol Other::                Other
@@ -4410,7 +4239,7 @@ Some machine configurations provide additional directives.
 @ifset COFF
 * Def::                         @code{.def @var{name}}
 @end ifset
-@ifset aout-bout
+@ifset aout
 * Desc::                        @code{.desc @var{symbol}, @var{abs-expression}}
 @end ifset
 @ifset COFF
@@ -4594,10 +4423,6 @@ quit also.  One day @code{.abort} will not be supported.
 When producing COFF output, @command{@value{AS}} accepts this directive as a
 synonym for @samp{.abort}.
 
-@ifset BOUT
-When producing @code{b.out} output, @command{@value{AS}} accepts this directive,
-but ignores it.
-@end ifset
 @end ifset
 
 @node Align
@@ -4624,7 +4449,7 @@ required alignment; this can be useful if you want the alignment to be filled
 with no-op instructions when appropriate.
 
 The way the required alignment is specified varies from system to system.
-For the arc, hppa, i386 using ELF, i860, iq2000, m68k, or1k,
+For the arc, hppa, i386 using ELF, iq2000, m68k, or1k,
 s390, sparc, tic4x, tic80 and xtensa, the first expression is the
 alignment request in bytes.  For example @samp{.align 8} advances
 the location counter until it is a multiple of 8.  If the location counter
@@ -5163,15 +4988,9 @@ The byte ordering is target dependent.
 @cindex debugging COFF symbols
 Begin defining debugging information for a symbol @var{name}; the
 definition extends until the @code{.endef} directive is encountered.
-@ifset BOUT
-
-This directive is only observed when @command{@value{AS}} is configured for COFF
-format output; when producing @code{b.out}, @samp{.def} is recognized,
-but ignored.
-@end ifset
 @end ifset
 
-@ifset aout-bout
+@ifset aout
 @node Desc
 @section @code{.desc @var{symbol}, @var{abs-expression}}
 
@@ -5199,12 +5018,6 @@ it, but produces no output, when configured for COFF.
 This directive is generated by compilers to include auxiliary debugging
 information in the symbol table.  It is only permitted inside
 @code{.def}/@code{.endef} pairs.
-@ifset BOUT
-
-@samp{.dim} is only meaningful when generating COFF format output; when
-@command{@value{AS}} is generating @code{b.out}, it accepts this directive but
-ignores it.
-@end ifset
 @end ifset
 
 @node Double
@@ -5265,12 +5078,6 @@ process anything in the file past the @code{.end} directive.
 @cindex @code{endef} directive
 This directive flags the end of a symbol definition begun with
 @code{.def}.
-@ifset BOUT
-
-@samp{.endef} is only meaningful when generating COFF format output; if
-@command{@value{AS}} is configured to generate @code{b.out}, it accepts this
-directive but ignores it.
-@end ifset
 @end ifset
 
 @node Endfunc
@@ -5801,7 +5608,7 @@ assemblers, but ignores it.
 
 @cindex @code{line} directive
 @cindex logical line number
-@ifset aout-bout
+@ifset aout
 Change the logical line number.  @var{line-number} must be an absolute
 expression.  The next line has that logical line number.  Therefore any other
 statements on the current line (after a statement separator character) are
@@ -5886,12 +5693,6 @@ must be an absolute expression.  The next line has that logical
 line number, so any other statements on the current line (after a
 statement separator character @code{;}) are reported as on logical
 line number @var{line-number} @minus{} 1.
-@ifset BOUT
-
-This directive is accepted, but ignored, when @command{@value{AS}} is
-configured for @code{b.out}; its effect is only associated with COFF
-output format.
-@end ifset
 @end ifset
 
 @node Loc
@@ -6220,7 +6021,7 @@ instruction size limit is set to the maximum supported size.
 @node Octa
 @section @code{.octa @var{bignums}}
 
-@c FIXME: double size emitted for "octa" on i960, others?  Or warn?
+@c FIXME: double size emitted for "octa" on some?  Or warn?
 @cindex @code{octa} directive
 @cindex integer, 16-byte
 @cindex sixteen byte integer
@@ -6535,12 +6336,6 @@ Set the storage-class value for a symbol.  This directive may only be
 used inside a @code{.def}/@code{.endef} pair.  Storage class may flag
 whether a symbol is static or external, or it may record further
 symbolic debugging information.
-@ifset BOUT
-
-The @samp{.scl} directive is primarily associated with COFF output; when
-configured to generate @code{b.out} output format, @command{@value{AS}}
-accepts this directive but ignores it.
-@end ifset
 @end ifset
 
 @ifset COFF-ELF
@@ -6900,11 +6695,6 @@ For COFF targets, the @code{.size} directive is only permitted inside
 .size @var{expression}
 @end smallexample
 
-@ifset BOUT
-@samp{.size} is only meaningful when generating COFF format output; when
-@command{@value{AS}} is generating @code{b.out}, it accepts this directive but
-ignores it.
-@end ifset
 @end ifset
 
 @ifset ELF
@@ -7172,12 +6962,6 @@ This directive is generated by compilers to include auxiliary debugging
 information in the symbol table.  It is only permitted inside
 @code{.def}/@code{.endef} pairs.  Tags are used to link structure
 definitions in the symbol table with instances of those structures.
-@ifset BOUT
-
-@samp{.tag} is only used when generating COFF format output; when
-@command{@value{AS}} is generating @code{b.out}, it accepts this directive but
-ignores it.
-@end ifset
 @end ifset
 
 @node Text
@@ -7225,11 +7009,6 @@ For COFF targets, this directive is permitted only within
 This records the integer @var{int} as the type attribute of a symbol table
 entry.
 
-@ifset BOUT
-@samp{.type} is associated only with COFF format output; when
-@command{@value{AS}} is configured for @code{b.out} output, it accepts this
-directive but ignores it.
-@end ifset
 @end ifset
 
 @ifset ELF
@@ -7328,11 +7107,6 @@ symbolic debugging format.  @xref{Sleb128, ,@code{.sleb128}}.
 This directive, permitted only within @code{.def}/@code{.endef} pairs,
 records the address @var{addr} as the value attribute of a symbol table
 entry.
-@ifset BOUT
-
-@samp{.val} is used only for COFF output; when @command{@value{AS}} is
-configured for @code{b.out}, it accepts this directive but ignores it.
-@end ifset
 @end ifset
 
 @ifset ELF
@@ -7422,7 +7196,7 @@ The size of the number emitted, and its byte order,
 depend on what target computer the assembly is for.
 @end ifset
 
-@c on amd29k, i960, sparc the "special treatment to support compilers" doesn't
+@c on sparc the "special treatment to support compilers" doesn't
 @c happen---32-bit addressability, period; no long/short jumps.
 @ifset DIFF-TBL-KLUGE
 @cindex difference tables altered
@@ -7764,12 +7538,6 @@ subject, see the hardware manufacturer's manual.
 @ifset I80386
 * i386-Dependent::              Intel 80386 and AMD x86-64 Dependent Features
 @end ifset
-@ifset I860
-* i860-Dependent::              Intel 80860 Dependent Features
-@end ifset
-@ifset I960
-* i960-Dependent::              Intel 80960 Dependent Features
-@end ifset
 @ifset IA64
 * IA-64-Dependent::             Intel IA-64 Dependent Features
 @end ifset
@@ -7979,14 +7747,6 @@ family.
 @include c-i386.texi
 @end ifset
 
-@ifset I860
-@include c-i860.texi
-@end ifset
-
-@ifset I960
-@include c-i960.texi
-@end ifset
-
 @ifset IA64
 @include c-ia64.texi
 @end ifset
diff --git a/gas/doc/c-i860.texi b/gas/doc/c-i860.texi
deleted file mode 100644
index 6e6726b..0000000
--- a/gas/doc/c-i860.texi
+++ /dev/null
@@ -1,197 +0,0 @@
-@c Copyright (C) 2000-2018 Free Software Foundation, Inc.
-@c This is part of the GAS manual.
-@c For copying conditions, see the file as.texinfo.
-@ifset GENERIC
-@page
-@node i860-Dependent
-@chapter Intel i860 Dependent Features
-@end ifset
-@ifclear GENERIC
-@node Machine Dependencies
-@chapter Intel i860 Dependent Features
-@end ifclear
-
-@ignore
-@c FIXME: This is basically a stub for i860. There is tons more information
-that I will add later (jle@cygnus.com).
-@end ignore
-
-@cindex i860 support
-@menu
-* Notes-i860::                  i860 Notes
-* Options-i860::                i860 Command-line Options
-* Directives-i860::             i860 Machine Directives
-* Opcodes for i860::            i860 Opcodes
-* Syntax of i860::              i860 Syntax
-@end menu
-
-@node Notes-i860
-@section i860 Notes
-This is a fairly complete i860 assembler which is compatible with the
-UNIX System V/860 Release 4 assembler. However, it does not currently
-support SVR4 PIC (i.e., @code{@@GOT, @@GOTOFF, @@PLT}).
-
-Like the SVR4/860 assembler, the output object format is ELF32. Currently,
-this is the only supported object format. If there is sufficient interest,
-other formats such as COFF may be implemented.
-
-Both the Intel and AT&T/SVR4 syntaxes are supported, with the latter
-being the default.  One difference is that AT&T syntax requires the '%'
-prefix on register names while Intel syntax does not.  Another difference
-is in the specification of relocatable expressions.  The Intel syntax
-is @code{ha%expression} whereas the SVR4 syntax is @code{[expression]@@ha}
-(and similarly for the "l" and "h" selectors).
-@node Options-i860
-@section i860 Command-line Options
-@subsection SVR4 compatibility options
-@table @code
-@item -V
-Print assembler version.
-@item -Qy
-Ignored.
-@item -Qn
-Ignored.
-@end table
-@subsection Other options
-@table @code
-@item -EL
-Select little endian output (this is the default).
-@item -EB
-Select big endian output. Note that the i860 always reads instructions
-as little endian data, so this option only effects data and not
-instructions.
-@item -mwarn-expand
-Emit a warning message if any pseudo-instruction expansions occurred.
-For example, a @code{or} instruction with an immediate larger than 16-bits
-will be expanded into two instructions. This is a very undesirable feature to
-rely on, so this flag can help detect any code where it happens. One
-use of it, for instance, has been to find and eliminate any place
-where @code{gcc} may emit these pseudo-instructions.
-@item -mxp
-Enable support for the i860XP instructions and control registers.  By default,
-this option is disabled so that only the base instruction set (i.e., i860XR)
-is supported.
-@item -mintel-syntax
-The i860 assembler defaults to AT&T/SVR4 syntax.  This option enables the
-Intel syntax.
-@end table
-
-@node Directives-i860
-@section i860 Machine Directives
-
-@cindex machine directives, i860
-@cindex i860 machine directives
-
-@table @code
-@cindex @code{dual} directive, i860
-@item .dual
-Enter dual instruction mode. While this directive is supported, the
-preferred way to use dual instruction mode is to explicitly code
-the dual bit with the @code{d.} prefix.
-@end table
-
-@table @code
-@cindex @code{enddual} directive, i860
-@item .enddual
-Exit dual instruction mode. While this directive is supported, the
-preferred way to use dual instruction mode is to explicitly code
-the dual bit with the @code{d.} prefix.
-@end table
-
-@table @code
-@cindex @code{atmp} directive, i860
-@item .atmp
-Change the temporary register used when expanding pseudo operations. The
-default register is @code{r31}.
-@end table
-
-The @code{.dual}, @code{.enddual}, and @code{.atmp} directives are available only in the Intel syntax mode.
-
-Both syntaxes allow for the standard @code{.align} directive.  However,
-the Intel syntax additionally allows keywords for the alignment
-parameter: "@code{.align type}", where `type' is one of @code{.short}, @code{.long},
-@code{.quad}, @code{.single}, @code{.double} representing alignments of 2, 4,
-16, 4, and 8, respectively.
-
-@node Opcodes for i860
-@section i860 Opcodes
-
-@cindex opcodes, i860
-@cindex i860 opcodes
-All of the Intel i860XR and i860XP machine instructions are supported. Please see
-either @emph{i860 Microprocessor Programmer's Reference Manual} or @emph{i860 Microprocessor Architecture} for more information.
-@subsection Other instruction support (pseudo-instructions)
-For compatibility with some other i860 assemblers, a number of
-pseudo-instructions are supported. While these are supported, they are
-a very undesirable feature that should be avoided -- in particular, when
-they result in an expansion to multiple actual i860 instructions. Below
-are the pseudo-instructions that result in expansions.
-@itemize @bullet
-@item Load large immediate into general register:
-
-The pseudo-instruction @code{mov imm,%rn} (where the immediate does
-not fit within a signed 16-bit field) will be expanded into:
-@smallexample
-orh large_imm@@h,%r0,%rn
-or large_imm@@l,%rn,%rn
-@end smallexample
-@item Load/store with relocatable address expression:
-
-For example, the pseudo-instruction @code{ld.b addr_exp(%rx),%rn}
-will be expanded into:
-@smallexample
-orh addr_exp@@ha,%rx,%r31
-ld.l addr_exp@@l(%r31),%rn
-@end smallexample
-
-The analogous expansions apply to @code{ld.x, st.x, fld.x, pfld.x, fst.x}, and @code{pst.x} as well.
-@item Signed large immediate with add/subtract:
-
-If any of the arithmetic operations @code{adds, addu, subs, subu} are used
-with an immediate larger than 16-bits (signed), then they will be expanded.
-For instance, the pseudo-instruction @code{adds large_imm,%rx,%rn} expands to:
-@smallexample
-orh large_imm@@h,%r0,%r31
-or large_imm@@l,%r31,%r31
-adds %r31,%rx,%rn
-@end smallexample
-@item Unsigned large immediate with logical operations:
-
-Logical operations (@code{or, andnot, or, xor}) also result in expansions.
-The pseudo-instruction @code{or large_imm,%rx,%rn} results in:
-@smallexample
-orh large_imm@@h,%rx,%r31
-or large_imm@@l,%r31,%rn
-@end smallexample
-
-Similarly for the others, except for @code{and} which expands to:
-@smallexample
-andnot (-1 - large_imm)@@h,%rx,%r31
-andnot (-1 - large_imm)@@l,%r31,%rn
-@end smallexample
-@end itemize
-
-@node Syntax of i860
-@section i860 Syntax
-@menu
-* i860-Chars::                Special Characters
-@end menu
-
-@node i860-Chars
-@subsection Special Characters
-
-@cindex line comment character, i860
-@cindex i860 line comment character
-The presence of a @samp{#} appearing anywhere on a line indicates the
-start of a comment that extends to the end of that line.
-
-If a @samp{#} appears as the first character of a line then the whole
-line is treated as a comment, but in this case the line can also be a
-logical line number directive (@pxref{Comments}) or a preprocessor
-control command (@pxref{Preprocessing}).
-
-@cindex line separator, i860
-@cindex statement separator, i860
-@cindex i860 line separator
-The @samp{;} character can be used to separate statements on the same
-line.
diff --git a/gas/doc/c-i960.texi b/gas/doc/c-i960.texi
deleted file mode 100644
index 61ff13b..0000000
--- a/gas/doc/c-i960.texi
+++ /dev/null
@@ -1,324 +0,0 @@
-@c Copyright (C) 1991-2018 Free Software Foundation, Inc.
-@c This is part of the GAS manual.
-@c For copying conditions, see the file as.texinfo.
-@ifset GENERIC
-@page
-@node i960-Dependent
-@chapter Intel 80960 Dependent Features
-@end ifset
-@ifclear GENERIC
-@node Machine Dependencies
-@chapter Intel 80960 Dependent Features
-@end ifclear
-
-@cindex i960 support
-@menu
-* Options-i960::                i960 Command-line Options
-* Floating Point-i960::         Floating Point
-* Directives-i960::             i960 Machine Directives
-* Opcodes for i960::            i960 Opcodes
-* Syntax of i960::              i960 Syntax
-@end menu
-
-@c FIXME! Add Syntax sec with discussion of bitfields here, at least so
-@c long as they're not turned on for other machines than 960.
-
-@node Options-i960
-
-@section i960 Command-line Options
-
-@cindex i960 options
-@cindex options, i960
-@table @code
-
-@cindex i960 architecture options
-@cindex architecture options, i960
-@cindex @code{-A} options, i960
-@item -ACA | -ACA_A | -ACB | -ACC | -AKA | -AKB | -AKC | -AMC
-Select the 80960 architecture.  Instructions or features not supported
-by the selected architecture cause fatal errors.
-
-@samp{-ACA} is equivalent to @samp{-ACA_A}; @samp{-AKC} is equivalent to
-@samp{-AMC}.  Synonyms are provided for compatibility with other tools.
-
-If you do not specify any of these options, @code{@value{AS}} generates code
-for any instruction or feature that is supported by @emph{some} version of the
-960 (even if this means mixing architectures!).  In principle,
-@code{@value{AS}} attempts to deduce the minimal sufficient processor type if
-none is specified; depending on the object code format, the processor type may
-be recorded in the object file.  If it is critical that the @code{@value{AS}}
-output match a specific architecture, specify that architecture explicitly.
-
-@cindex @code{-b} option, i960
-@cindex branch recording, i960
-@cindex i960 branch recording
-@item -b
-Add code to collect information about conditional branches taken, for
-later optimization using branch prediction bits.  (The conditional branch
-instructions have branch prediction bits in the CA, CB, and CC
-architectures.)  If @var{BR} represents a conditional branch instruction,
-the following represents the code generated by the assembler when
-@samp{-b} is specified:
-
-@smallexample
-        call    @var{increment routine}
-        .word   0       # pre-counter
-Label:  @var{BR}
-        call    @var{increment routine}
-        .word   0       # post-counter
-@end smallexample
-
-The counter following a branch records the number of times that branch
-was @emph{not} taken; the difference between the two counters is the
-number of times the branch @emph{was} taken.
-
-@cindex @code{gbr960}, i960 postprocessor
-@cindex branch statistics table, i960
-A table of every such @code{Label} is also generated, so that the
-external postprocessor @code{gbr960} (supplied by Intel) can locate all
-the counters.  This table is always labeled @samp{__BRANCH_TABLE__};
-this is a local symbol to permit collecting statistics for many separate
-object files.  The table is word aligned, and begins with a two-word
-header.  The first word, initialized to 0, is used in maintaining linked
-lists of branch tables.  The second word is a count of the number of
-entries in the table, which follow immediately: each is a word, pointing
-to one of the labels illustrated above.
-
-@c TEXI2ROFF-KILL
-@ifinfo
-@c END TEXI2ROFF-KILL
-@example
- +------------+------------+------------+ ... +------------+
- |            |            |            |     |            |
- |  *NEXT     |  COUNT: N  | *BRLAB 1   |     | *BRLAB N   |
- |            |            |            |     |            |
- +------------+------------+------------+ ... +------------+
-
-               __BRANCH_TABLE__ layout
-@end example
-@c TEXI2ROFF-KILL
-@end ifinfo
-@need 2000
-@tex
-\vskip 1pc
-\line{\leftskip=0pt\hskip\tableindent
-\boxit{2cm}{\tt *NEXT}\boxit{2cm}{\tt COUNT: \it N}\boxit{2cm}{\tt
-*BRLAB 1}\ibox{1cm}{\quad\dots}\boxit{2cm}{\tt *BRLAB \it N}\hfil}
-\centerline{\it {\tt \_\_BRANCH\_TABLE\_\_} layout}
-@end tex
-@c END TEXI2ROFF-KILL
-
-The first word of the header is used to locate multiple branch tables,
-since each object file may contain one. Normally the links are
-maintained with a call to an initialization routine, placed at the
-beginning of each function in the file.  The @sc{gnu} C compiler
-generates these calls automatically when you give it a @samp{-b} option.
-For further details, see the documentation of @samp{gbr960}.
-
-@cindex @code{-no-relax} option, i960
-@item -no-relax
-Normally, Compare-and-Branch instructions with targets that require
-displacements greater than 13 bits (or that have external targets) are
-replaced with the corresponding compare (or @samp{chkbit}) and branch
-instructions.  You can use the @samp{-no-relax} option to specify that
-@code{@value{AS}} should generate errors instead, if the target displacement
-is larger than 13 bits.
-
-This option does not affect the Compare-and-Jump instructions; the code
-emitted for them is @emph{always} adjusted when necessary (depending on
-displacement size), regardless of whether you use @samp{-no-relax}.
-@end table
-
-@node Floating Point-i960
-@section Floating Point
-
-@cindex floating point, i960 (@sc{ieee})
-@cindex i960 floating point (@sc{ieee})
-@code{@value{AS}} generates @sc{ieee} floating-point numbers for the directives
-@samp{.float}, @samp{.double}, @samp{.extended}, and @samp{.single}.
-
-@node Directives-i960
-@section i960 Machine Directives
-
-@cindex machine directives, i960
-@cindex i960 machine directives
-
-@table @code
-@cindex @code{bss} directive, i960
-@item .bss @var{symbol}, @var{length}, @var{align}
-Reserve @var{length} bytes in the bss section for a local @var{symbol},
-aligned to the power of two specified by @var{align}.  @var{length} and
-@var{align} must be positive absolute expressions.  This directive
-differs from @samp{.lcomm} only in that it permits you to specify
-an alignment.  @xref{Lcomm,,@code{.lcomm}}.
-@end table
-
-@table @code
-@cindex @code{extended} directive, i960
-@item .extended @var{flonums}
-@code{.extended} expects zero or more flonums, separated by commas; for
-each flonum, @samp{.extended} emits an @sc{ieee} extended-format (80-bit)
-floating-point number.
-
-@cindex @code{leafproc} directive, i960
-@item .leafproc @var{call-lab}, @var{bal-lab}
-You can use the @samp{.leafproc} directive in conjunction with the
-optimized @code{callj} instruction to enable faster calls of leaf
-procedures.  If a procedure is known to call no other procedures, you
-may define an entry point that skips procedure prolog code (and that does
-not depend on system-supplied saved context), and declare it as the
-@var{bal-lab} using @samp{.leafproc}.  If the procedure also has an
-entry point that goes through the normal prolog, you can specify that
-entry point as @var{call-lab}.
-
-A @samp{.leafproc} declaration is meant for use in conjunction with the
-optimized call instruction @samp{callj}; the directive records the data
-needed later to choose between converting the @samp{callj} into a
-@code{bal} or a @code{call}.
-
-@var{call-lab} is optional; if only one argument is present, or if the
-two arguments are identical, the single argument is assumed to be the
-@code{bal} entry point.
-
-@cindex @code{sysproc} directive, i960
-@item .sysproc @var{name}, @var{index}
-The @samp{.sysproc} directive defines a name for a system procedure.
-After you define it using @samp{.sysproc}, you can use @var{name} to
-refer to the system procedure identified by @var{index} when calling
-procedures with the optimized call instruction @samp{callj}.
-
-Both arguments are required; @var{index} must be between 0 and 31
-(inclusive).
-@end table
-
-@node Opcodes for i960
-@section i960 Opcodes
-
-@cindex opcodes, i960
-@cindex i960 opcodes
-All Intel 960 machine instructions are supported;
-@pxref{Options-i960,,i960 Command-line Options} for a discussion of
-selecting the instruction subset for a particular 960
-architecture.@refill
-
-Some opcodes are processed beyond simply emitting a single corresponding
-instruction: @samp{callj}, and Compare-and-Branch or Compare-and-Jump
-instructions with target displacements larger than 13 bits.
-
-@menu
-* callj-i960::                  @code{callj}
-* Compare-and-branch-i960::     Compare-and-Branch
-@end menu
-
-@node callj-i960
-@subsection @code{callj}
-
-@cindex @code{callj}, i960 pseudo-opcode
-@cindex i960 @code{callj} pseudo-opcode
-You can write @code{callj} to have the assembler or the linker determine
-the most appropriate form of subroutine call: @samp{call},
-@samp{bal}, or @samp{calls}.  If the assembly source contains
-enough information---a @samp{.leafproc} or @samp{.sysproc} directive
-defining the operand---then @code{@value{AS}} translates the
-@code{callj}; if not, it simply emits the @code{callj}, leaving it
-for the linker to resolve.
-
-@node Compare-and-branch-i960
-@subsection Compare-and-Branch
-
-@cindex i960 compare/branch instructions
-@cindex compare/branch instructions, i960
-The 960 architectures provide combined Compare-and-Branch instructions
-that permit you to store the branch target in the lower 13 bits of the
-instruction word itself.  However, if you specify a branch target far
-enough away that its address won't fit in 13 bits, the assembler can
-either issue an error, or convert your Compare-and-Branch instruction
-into separate instructions to do the compare and the branch.
-
-@cindex compare and jump expansions, i960
-@cindex i960 compare and jump expansions
-Whether @code{@value{AS}} gives an error or expands the instruction depends
-on two choices you can make: whether you use the @samp{-no-relax} option,
-and whether you use a ``Compare and Branch'' instruction or a ``Compare
-and Jump'' instruction.  The ``Jump'' instructions are @emph{always}
-expanded if necessary; the ``Branch'' instructions are expanded when
-necessary @emph{unless} you specify @code{-no-relax}---in which case
-@code{@value{AS}} gives an error instead.
-
-These are the Compare-and-Branch instructions, their ``Jump'' variants,
-and the instruction pairs they may expand into:
-
-@c TEXI2ROFF-KILL
-@ifinfo
-@c END TEXI2ROFF-KILL
-@example
-        Compare and
-     Branch      Jump       Expanded to
-     ------    ------       ------------
-        bbc                 chkbit; bno
-        bbs                 chkbit; bo
-     cmpibe    cmpije       cmpi; be
-     cmpibg    cmpijg       cmpi; bg
-    cmpibge   cmpijge       cmpi; bge
-     cmpibl    cmpijl       cmpi; bl
-    cmpible   cmpijle       cmpi; ble
-    cmpibno   cmpijno       cmpi; bno
-    cmpibne   cmpijne       cmpi; bne
-     cmpibo    cmpijo       cmpi; bo
-     cmpobe    cmpoje       cmpo; be
-     cmpobg    cmpojg       cmpo; bg
-    cmpobge   cmpojge       cmpo; bge
-     cmpobl    cmpojl       cmpo; bl
-    cmpoble   cmpojle       cmpo; ble
-    cmpobne   cmpojne       cmpo; bne
-@end example
-@c TEXI2ROFF-KILL
-@end ifinfo
-@tex
-\hskip\tableindent
-\halign{\hfil {\tt #}\quad&\hfil {\tt #}\qquad&{\tt #}\hfil\cr
-\omit{\hfil\it Compare and\hfil}\span\omit&\cr
-{\it Branch}&{\it Jump}&{\it Expanded to}\cr
-        bbc&                 & chkbit; bno\cr
-        bbs&                 & chkbit; bo\cr
-     cmpibe&    cmpije&       cmpi; be\cr
-     cmpibg&    cmpijg&       cmpi; bg\cr
-    cmpibge&   cmpijge&       cmpi; bge\cr
-     cmpibl&    cmpijl&       cmpi; bl\cr
-    cmpible&   cmpijle&       cmpi; ble\cr
-    cmpibno&   cmpijno&       cmpi; bno\cr
-    cmpibne&   cmpijne&       cmpi; bne\cr
-     cmpibo&    cmpijo&       cmpi; bo\cr
-     cmpobe&    cmpoje&       cmpo; be\cr
-     cmpobg&    cmpojg&       cmpo; bg\cr
-    cmpobge&   cmpojge&       cmpo; bge\cr
-     cmpobl&    cmpojl&       cmpo; bl\cr
-    cmpoble&   cmpojle&       cmpo; ble\cr
-    cmpobne&   cmpojne&       cmpo; bne\cr}
-@end tex
-@c END TEXI2ROFF-KILL
-
-@node Syntax of i960
-@section Syntax for the i960
-@menu
-* i960-Chars::                Special Characters
-@end menu
-
-@node i960-Chars
-@subsection Special Characters
-
-@cindex line comment character, i960
-@cindex i960 line comment character
-The presence of a @samp{#} on a line indicates the start of a comment
-that extends to the end of the current line.
-
-If a @samp{#} appears as the first character of a line, the whole line
-is treated as a comment, but in this case the line can also be a
-logical line number directive (@pxref{Comments}) or a
-preprocessor control command (@pxref{Preprocessing}).
-
-@cindex line separator, i960
-@cindex statement separator, i960
-@cindex i960 line separator
-The @samp{;} character can be used to separate statements on the same
-line.
diff --git a/gas/doc/h8.texi b/gas/doc/h8.texi
index 8a88d6b..6291c5d 100644
--- a/gas/doc/h8.texi
+++ b/gas/doc/h8.texi
@@ -7,7 +7,6 @@
 @clear INTERNALS
 @clear MULTI-OBJ
 @clear AOUT
-@clear BOUT
 @set COFF
 @clear ELF
 @set Renesas-all
diff --git a/gas/doc/internals.texi b/gas/doc/internals.texi
index 418c700..93352ec 100644
--- a/gas/doc/internals.texi
+++ b/gas/doc/internals.texi
@@ -1096,11 +1096,6 @@ You may define this macro to parse an expression used in a data allocation
 pseudo-op such as @code{.word}.  You can use this to recognize relocation
 directives that may appear in such directives.
 
-@item BITFIELD_CONS_EXPRESSION
-@cindex BITFIELD_CONS_EXPRESSION
-If you define this macro, GAS will recognize bitfield instructions in data
-allocation pseudo-ops, as used on the i960.
-
 @item REPEAT_CONS_EXPRESSION
 @cindex REPEAT_CONS_EXPRESSION
 If you define this macro, GAS will recognize repeat counts in data allocation
@@ -1753,12 +1748,6 @@ no-op instructions, it must be able to expand or shrink the section contents
 while still preserving intra-section references and meeting alignment
 requirements.
 
-For the i960 using b.out format, no expansion is done; instead, each
-@samp{.align} directive causes extra space to be allocated, enough that when
-the linker is relaxing a section and removing unneeded space, it can discard
-some or all of this extra padding and cause the following data to be correctly
-aligned.
-
 For the H8/300, I think the linker expands calls that can't reach, and doesn't
 worry about alignment issues; the cpu probably never needs any significant
 alignment beyond the instruction size.
diff --git a/gas/expr.c b/gas/expr.c
index 3e28af6..074e0b3 100644
--- a/gas/expr.c
+++ b/gas/expr.c
@@ -1302,48 +1302,6 @@ operand (expressionS *expressionP, enum expr_mode mode)
 	    }
 #endif
 
-#ifdef TC_I960
-	  /* The MRI i960 assembler permits
-	         lda sizeof code,g13
-	     FIXME: This should use md_parse_name.  */
-	  if (flag_mri
-	      && (strcasecmp (name, "sizeof") == 0
-		  || strcasecmp (name, "startof") == 0))
-	    {
-	      int start;
-	      char *buf;
-
-	      start = (name[1] == 't'
-		       || name[1] == 'T');
-
-	      *input_line_pointer = c;
-	      SKIP_WHITESPACE_AFTER_NAME ();
-
-	      c = get_symbol_name (& name);
-	      if (! *name)
-		{
-		  as_bad (_("expected symbol name"));
-		  expressionP->X_op = O_absent;
-		  (void) restore_line_pointer (c);
-		  ignore_rest_of_line ();
-		  break;
-		}
-
-	      buf = concat (start ? ".startof." : ".sizeof.", name,
-			    (char *) NULL);
-	      symbolP = symbol_make (buf);
-	      free (buf);
-
-	      expressionP->X_op = O_symbol;
-	      expressionP->X_add_symbol = symbolP;
-	      expressionP->X_add_number = 0;
-
-	      *input_line_pointer = c;
-	      SKIP_WHITESPACE_AFTER_NAME ();
-	      break;
-	    }
-#endif
-
 	  symbolP = symbol_find_or_make (name);
 
 	  /* If we have an absolute symbol or a reg, then we know its
diff --git a/gas/po/POTFILES.in b/gas/po/POTFILES.in
index 51bbb5b..f4fe666 100644
--- a/gas/po/POTFILES.in
+++ b/gas/po/POTFILES.in
@@ -76,10 +76,6 @@ config/tc-i370.c
 config/tc-i370.h
 config/tc-i386.c
 config/tc-i386.h
-config/tc-i860.c
-config/tc-i860.h
-config/tc-i960.c
-config/tc-i960.h
 config/tc-ia64.c
 config/tc-ia64.h
 config/tc-ip2k.c
diff --git a/gas/read.c b/gas/read.c
index ff78cae..1f211b6 100644
--- a/gas/read.c
+++ b/gas/read.c
@@ -2972,81 +2972,10 @@ s_mri_sect (char *type ATTRIBUTE_UNUSED)
   demand_empty_rest_of_line ();
 
 #else /* ! TC_M68K */
-#ifdef TC_I960
-
-  char *name;
-  char c;
-  segT seg;
-
-  SKIP_WHITESPACE ();
-
-  c = get_symbol_name (& name);
-
-  name = xstrdup (name);
-
-  c = restore_line_pointer (c);
-
-  seg = subseg_new (name, 0);
-
-  if (c != ',')
-    *type = 'C';
-  else
-    {
-      char *sectype;
-
-      ++input_line_pointer;
-      SKIP_WHITESPACE ();
-      c = get_symbol_name (& sectype);
-      if (*sectype == '\0')
-	*type = 'C';
-      else if (strcasecmp (sectype, "text") == 0)
-	*type = 'C';
-      else if (strcasecmp (sectype, "data") == 0)
-	*type = 'D';
-      else if (strcasecmp (sectype, "romdata") == 0)
-	*type = 'R';
-      else
-	as_warn (_("unrecognized section type `%s'"), sectype);
-      (void) restore_line_pointer (c);
-    }
-
-  if (*input_line_pointer == ',')
-    {
-      char *seccmd;
-
-      ++input_line_pointer;
-      SKIP_WHITESPACE ();
-      c = get_symbol_name (& seccmd);
-      if (strcasecmp (seccmd, "absolute") == 0)
-	{
-	  as_bad (_("absolute sections are not supported"));
-	  *input_line_pointer = c;
-	  ignore_rest_of_line ();
-	  return;
-	}
-      else if (strcasecmp (seccmd, "align") == 0)
-	{
-	  unsigned int align;
-
-	  (void) restore_line_pointer (c);
-	  align = get_absolute_expression ();
-	  record_alignment (seg, align);
-	}
-      else
-	{
-	  as_warn (_("unrecognized section command `%s'"), seccmd);
-	  (void) restore_line_pointer (c);
-	}
-    }
-
-  demand_empty_rest_of_line ();
-
-#else /* ! TC_I960 */
   /* The MRI assembler seems to use different forms of .sect for
      different targets.  */
   as_bad ("MRI mode not supported for this target");
   ignore_rest_of_line ();
-#endif /* ! TC_I960 */
 #endif /* ! TC_M68K */
 }
 
@@ -3978,7 +3907,6 @@ pseudo_set (symbolS *symbolP)
 /* Some targets need to parse the expression in various fancy ways.
    You can define TC_PARSE_CONS_EXPRESSION to do whatever you like
    (for example, the HPPA does this).  Otherwise, you can define
-   BITFIELD_CONS_EXPRESSIONS to permit bitfields to be specified, or
    REPEAT_CONS_EXPRESSIONS to permit repeat counts.  If none of these
    are defined, which is the normal case, then only simple expressions
    are permitted.  */
@@ -3989,12 +3917,6 @@ parse_mri_cons (expressionS *exp, unsigned int nbytes);
 #endif
 
 #ifndef TC_PARSE_CONS_EXPRESSION
-#ifdef BITFIELD_CONS_EXPRESSIONS
-#define TC_PARSE_CONS_EXPRESSION(EXP, NBYTES) \
-  (parse_bitfield_cons (EXP, NBYTES), TC_PARSE_CONS_RETURN_NONE)
-static void
-parse_bitfield_cons (expressionS *exp, unsigned int nbytes);
-#endif
 #ifdef REPEAT_CONS_EXPRESSIONS
 #define TC_PARSE_CONS_EXPRESSION(EXP, NBYTES) \
   (parse_repeat_cons (EXP, NBYTES), TC_PARSE_CONS_RETURN_NONE)
@@ -4658,136 +4580,6 @@ emit_expr_fix (expressionS *exp, unsigned int nbytes, fragS *frag, char *p,
 #endif
 }
 
-#ifdef BITFIELD_CONS_EXPRESSIONS
-
-/* i960 assemblers, (eg, asm960), allow bitfields after ".byte" as
-   w:x,y:z, where w and y are bitwidths and x and y are values.  They
-   then pack them all together. We do a little better in that we allow
-   them in words, longs, etc. and we'll pack them in target byte order
-   for you.
-
-   The rules are: pack least significant bit first, if a field doesn't
-   entirely fit, put it in the next unit.  Overflowing the bitfield is
-   explicitly *not* even a warning.  The bitwidth should be considered
-   a "mask".
-
-   To use this function the tc-XXX.h file should define
-   BITFIELD_CONS_EXPRESSIONS.  */
-
-static void
-parse_bitfield_cons (expressionS *exp, unsigned int nbytes)
-{
-  unsigned int bits_available = BITS_PER_CHAR * nbytes;
-  char *hold = input_line_pointer;
-
-  (void) expression (exp);
-
-  if (*input_line_pointer == ':')
-    {
-      /* Bitfields.  */
-      long value = 0;
-
-      for (;;)
-	{
-	  unsigned long width;
-
-	  if (*input_line_pointer != ':')
-	    {
-	      input_line_pointer = hold;
-	      break;
-	    }			/* Next piece is not a bitfield.  */
-
-	  /* In the general case, we can't allow
-	     full expressions with symbol
-	     differences and such.  The relocation
-	     entries for symbols not defined in this
-	     assembly would require arbitrary field
-	     widths, positions, and masks which most
-	     of our current object formats don't
-	     support.
-
-	     In the specific case where a symbol
-	     *is* defined in this assembly, we
-	     *could* build fixups and track it, but
-	     this could lead to confusion for the
-	     backends.  I'm lazy. I'll take any
-	     SEG_ABSOLUTE. I think that means that
-	     you can use a previous .set or
-	     .equ type symbol.  xoxorich.  */
-
-	  if (exp->X_op == O_absent)
-	    {
-	      as_warn (_("using a bit field width of zero"));
-	      exp->X_add_number = 0;
-	      exp->X_op = O_constant;
-	    }			/* Implied zero width bitfield.  */
-
-	  if (exp->X_op != O_constant)
-	    {
-	      *input_line_pointer = '\0';
-	      as_bad (_("field width \"%s\" too complex for a bitfield"), hold);
-	      *input_line_pointer = ':';
-	      demand_empty_rest_of_line ();
-	      return;
-	    }			/* Too complex.  */
-
-	  if ((width = exp->X_add_number) > (BITS_PER_CHAR * nbytes))
-	    {
-	      as_warn (ngettext ("field width %lu too big to fit in %d byte:"
-				 " truncated to %d bits",
-				 "field width %lu too big to fit in %d bytes:"
-				 " truncated to %d bits",
-				 nbytes),
-		       width, nbytes, (BITS_PER_CHAR * nbytes));
-	      width = BITS_PER_CHAR * nbytes;
-	    }			/* Too big.  */
-
-	  if (width > bits_available)
-	    {
-	      /* FIXME-SOMEDAY: backing up and reparsing is wasteful.  */
-	      input_line_pointer = hold;
-	      exp->X_add_number = value;
-	      break;
-	    }			/* Won't fit.  */
-
-	  /* Skip ':'.  */
-	  hold = ++input_line_pointer;
-
-	  (void) expression (exp);
-	  if (exp->X_op != O_constant)
-	    {
-	      char cache = *input_line_pointer;
-
-	      *input_line_pointer = '\0';
-	      as_bad (_("field value \"%s\" too complex for a bitfield"), hold);
-	      *input_line_pointer = cache;
-	      demand_empty_rest_of_line ();
-	      return;
-	    }			/* Too complex.  */
-
-	  value |= ((~(-(1 << width)) & exp->X_add_number)
-		    << ((BITS_PER_CHAR * nbytes) - bits_available));
-
-	  if ((bits_available -= width) == 0
-	      || is_it_end_of_statement ()
-	      || *input_line_pointer != ',')
-	    {
-	      break;
-	    }			/* All the bitfields we're gonna get.  */
-
-	  hold = ++input_line_pointer;
-	  (void) expression (exp);
-	}
-
-      exp->X_add_number = value;
-      exp->X_op = O_constant;
-      exp->X_unsigned = 1;
-      exp->X_extrabit = 0;
-    }
-}
-
-#endif /* BITFIELD_CONS_EXPRESSIONS */
-
 /* Handle an MRI style string expression.  */
 
 #ifdef TC_M68K
diff --git a/gas/symbols.c b/gas/symbols.c
index d16e804..08a708b 100644
--- a/gas/symbols.c
+++ b/gas/symbols.c
@@ -407,8 +407,7 @@ colon (/* Just seen "x:" - rattle symbols & frags.  */
 		}
 	      else
 		{
-#if (!defined (OBJ_AOUT) && !defined (OBJ_MAYBE_AOUT) \
-     && !defined (OBJ_BOUT) && !defined (OBJ_MAYBE_BOUT))
+#if (!defined (OBJ_AOUT) && !defined (OBJ_MAYBE_AOUT))
 		  static const char *od_buf = "";
 #else
 		  char od_buf[100];
diff --git a/gas/testsuite/gas/all/gas.exp b/gas/testsuite/gas/all/gas.exp
index d828d4d..0355a03 100644
--- a/gas/testsuite/gas/all/gas.exp
+++ b/gas/testsuite/gas/all/gas.exp
@@ -106,7 +106,7 @@ case $target_triplet in {
     default {
 	# Some targets don't manage to resolve BFD_RELOC_8 for constants.
 	setup_xfail "alpha*-*-*" "*c30*-*-*" "*c4x*-*-*" \
-	    "d\[13\]0v*-*-*" "i860-*-*" \
+	    "d\[13\]0v*-*-*" \
 	    "nds32*-*-*" "pdp11-*-*" "xtensa*-*-*"
 	run_dump_test forward
     }
@@ -335,8 +335,7 @@ if {   ([istarget *-*-coff*] && ![istarget arm*-*-coff] && ![istarget *c4x*-*-co
      || [istarget i*86-*-cygwin*] \
      || [istarget x86_64-*-mingw*] \
      || [istarget i*86-*-*nt] \
-     || [istarget i*86-*-interix*] \
-     || ([istarget i960-*-vxworks5.*] && ![istarget i960-*-vxworks5.0*]) } {
+     || [istarget i*86-*-interix*] } {
     run_dump_test cofftag
 }
 
@@ -413,10 +412,7 @@ if { ![istarget "powerpc*-*-*"] && ![istarget "rs6000*-*-*"] && ![istarget "s390
     run_dump_test byte
 }
 
-# .quad is 16 bytes on i960.
-if { ![istarget "i960-*-*"] } {
-    run_dump_test quad
-}
+run_dump_test quad
 
 # som doesn't use .data section.
 case $target_triplet in {
@@ -467,9 +463,6 @@ case $target_triplet in {
     { "mmix-*-*" } {
 	set nop_type 5
     }
-    { "i960-*-*" } {
-	set nop_type 4
-    }
     { "i370-*-*" } {
 	set nop_type 3
     }
diff --git a/gas/testsuite/gas/i860/README.i860 b/gas/testsuite/gas/i860/README.i860
deleted file mode 100644
index 47feaa4..0000000
--- a/gas/testsuite/gas/i860/README.i860
+++ /dev/null
@@ -1,39 +0,0 @@
-
-Testsuite for the i860 version of the GNU assembler
----------------------------------------------------
-
-This is a simple testsuite for the i860 assembler.  It currently
-consists mostly of testcases for checking that every instruction is
-parsed correctly and that correct object code is generated (these
-are called "blah.s").  The files called "blah-err.s" test for error
-conditions.
-
-The suite includes testcases for the base i860XR instruction set as well
-as the enhanced i860XP instructions and control registers.
-
-The expected results files were generated using the UNIX System V/i860
-Release 4 vendor assembler (/usr/ccs/bin/as -V reports version
-"Standard C Development Environment  (SCDE) 5.0 12/08/89").  This
-way GAS/i860 is tested against a known good assembler.
-
-TODO:
- - Relocation testing is basically non-existent.
- - pst.d (pixel store) is the only instruction with no testcase.
- - Some pseudo instructions need testcases (mov, all pfmov, etc.).
- - More tests for dual instruction mode: check that dual mode has a
-   proper pair (FLOP/core) of instructions, and other error conditions.
- - Most current testcases use the default AT&T/SVR4 syntax; a few simple
-   tests of the Intel syntax should be added to prevent bitrot (including
-   relocatable expression syntax, etc).  Test file dual03.s uses Intel
-   syntax lightly (i.e., register names without '%' prefix).
-
-Contact me (Jason Eckhardt, jle@rice.edu) if you'd like to help.
-
-Known testsuite failures:
-  - none.
-
-Copyright (C) 2012-2018 Free Software Foundation, Inc.
-
-Copying and distribution of this file, with or without modification,
-are permitted in any medium without royalty provided the copyright
-notice and this notice are preserved.
diff --git a/gas/testsuite/gas/i860/bitwise.d b/gas/testsuite/gas/i860/bitwise.d
deleted file mode 100644
index 59954a4..0000000
--- a/gas/testsuite/gas/i860/bitwise.d
+++ /dev/null
@@ -1,141 +0,0 @@
-#as:
-#objdump: -dr
-#name: i860 bitwise
-
-.*: +file format .*
-
-Disassembly of section \.text:
-
-00000000 <\.text>:
-   0:	00 00 22 c0 	and	%r0,%r1,%sp
-   4:	00 18 85 c0 	and	%fp,%r4,%r5
-   8:	00 30 e8 c0 	and	%r6,%r7,%r8
-   c:	00 48 4b c1 	and	%r9,%r10,%r11
-  10:	00 60 ae c1 	and	%r12,%r13,%r14
-  14:	00 78 11 c2 	and	%r15,%r16,%r17
-  18:	00 90 74 c2 	and	%r18,%r19,%r20
-  1c:	00 a8 d7 c2 	and	%r21,%r22,%r23
-  20:	00 c0 3a c3 	and	%r24,%r25,%r26
-  24:	00 d8 9d c3 	and	%r27,%r28,%r29
-  28:	00 f0 e0 c3 	and	%r30,%r31,%r0
-  2c:	00 00 22 d0 	andnot	%r0,%r1,%sp
-  30:	00 18 85 d0 	andnot	%fp,%r4,%r5
-  34:	00 30 e8 d0 	andnot	%r6,%r7,%r8
-  38:	00 48 4b d1 	andnot	%r9,%r10,%r11
-  3c:	00 60 ae d1 	andnot	%r12,%r13,%r14
-  40:	00 78 11 d2 	andnot	%r15,%r16,%r17
-  44:	00 90 74 d2 	andnot	%r18,%r19,%r20
-  48:	00 a8 d7 d2 	andnot	%r21,%r22,%r23
-  4c:	00 c0 3a d3 	andnot	%r24,%r25,%r26
-  50:	00 d8 9d d3 	andnot	%r27,%r28,%r29
-  54:	00 f0 e0 d3 	andnot	%r30,%r31,%r0
-  58:	00 00 22 e0 	or	%r0,%r1,%sp
-  5c:	00 18 85 e0 	or	%fp,%r4,%r5
-  60:	00 30 e8 e0 	or	%r6,%r7,%r8
-  64:	00 48 4b e1 	or	%r9,%r10,%r11
-  68:	00 60 ae e1 	or	%r12,%r13,%r14
-  6c:	00 78 11 e2 	or	%r15,%r16,%r17
-  70:	00 90 74 e2 	or	%r18,%r19,%r20
-  74:	00 a8 d7 e2 	or	%r21,%r22,%r23
-  78:	00 c0 3a e3 	or	%r24,%r25,%r26
-  7c:	00 d8 9d e3 	or	%r27,%r28,%r29
-  80:	00 f0 e0 e3 	or	%r30,%r31,%r0
-  84:	00 00 22 f0 	xor	%r0,%r1,%sp
-  88:	00 18 85 f0 	xor	%fp,%r4,%r5
-  8c:	00 30 e8 f0 	xor	%r6,%r7,%r8
-  90:	00 48 4b f1 	xor	%r9,%r10,%r11
-  94:	00 60 ae f1 	xor	%r12,%r13,%r14
-  98:	00 78 11 f2 	xor	%r15,%r16,%r17
-  9c:	00 90 74 f2 	xor	%r18,%r19,%r20
-  a0:	00 a8 d7 f2 	xor	%r21,%r22,%r23
-  a4:	00 c0 3a f3 	xor	%r24,%r25,%r26
-  a8:	00 d8 9d f3 	xor	%r27,%r28,%r29
-  ac:	00 f0 e0 f3 	xor	%r30,%r31,%r0
-  b0:	00 00 22 c4 	and	0x0000,%r1,%sp
-  b4:	00 20 85 c4 	and	0x2000,%r4,%r5
-  b8:	f5 13 e8 c4 	and	0x13f5,%r7,%r8
-  bc:	00 80 4b c5 	and	0x8000,%r10,%r11
-  c0:	e8 fd ae c5 	and	0xfde8,%r13,%r14
-  c4:	ff ff 11 c6 	and	0xffff,%r16,%r17
-  c8:	ff ff 74 c6 	and	0xffff,%r19,%r20
-  cc:	cd ab d7 c6 	and	0xabcd,%r22,%r23
-  d0:	34 12 3a c7 	and	0x1234,%r25,%r26
-  d4:	00 00 9d c7 	and	0x0000,%r28,%r29
-  d8:	03 00 e0 c7 	and	0x0003,%r31,%r0
-  dc:	01 00 22 cc 	andh	0x0001,%r1,%sp
-  e0:	01 20 85 cc 	andh	0x2001,%r4,%r5
-  e4:	f6 13 e8 cc 	andh	0x13f6,%r7,%r8
-  e8:	01 80 4b cd 	andh	0x8001,%r10,%r11
-  ec:	e9 fd ae cd 	andh	0xfde9,%r13,%r14
-  f0:	ff ff 11 ce 	andh	0xffff,%r16,%r17
-  f4:	ff ff 74 ce 	andh	0xffff,%r19,%r20
-  f8:	cd ab d7 ce 	andh	0xabcd,%r22,%r23
-  fc:	34 12 3a cf 	andh	0x1234,%r25,%r26
- 100:	00 00 9d cf 	andh	0x0000,%r28,%r29
- 104:	03 00 e0 cf 	andh	0x0003,%r31,%r0
- 108:	00 00 22 d4 	andnot	0x0000,%r1,%sp
- 10c:	00 20 85 d4 	andnot	0x2000,%r4,%r5
- 110:	f5 13 e8 d4 	andnot	0x13f5,%r7,%r8
- 114:	00 80 4b d5 	andnot	0x8000,%r10,%r11
- 118:	e8 fd ae d5 	andnot	0xfde8,%r13,%r14
- 11c:	ff ff 11 d6 	andnot	0xffff,%r16,%r17
- 120:	ff ff 74 d6 	andnot	0xffff,%r19,%r20
- 124:	cd ab d7 d6 	andnot	0xabcd,%r22,%r23
- 128:	34 12 3a d7 	andnot	0x1234,%r25,%r26
- 12c:	00 00 9d d7 	andnot	0x0000,%r28,%r29
- 130:	03 00 e0 d7 	andnot	0x0003,%r31,%r0
- 134:	01 00 22 dc 	andnoth	0x0001,%r1,%sp
- 138:	01 20 85 dc 	andnoth	0x2001,%r4,%r5
- 13c:	f6 13 e8 dc 	andnoth	0x13f6,%r7,%r8
- 140:	01 80 4b dd 	andnoth	0x8001,%r10,%r11
- 144:	e9 fd ae dd 	andnoth	0xfde9,%r13,%r14
- 148:	ff ff 11 de 	andnoth	0xffff,%r16,%r17
- 14c:	ff ff 74 de 	andnoth	0xffff,%r19,%r20
- 150:	cd ab d7 de 	andnoth	0xabcd,%r22,%r23
- 154:	34 12 3a df 	andnoth	0x1234,%r25,%r26
- 158:	00 00 9d df 	andnoth	0x0000,%r28,%r29
- 15c:	03 00 e0 df 	andnoth	0x0003,%r31,%r0
- 160:	00 00 22 e4 	or	0x0000,%r1,%sp
- 164:	01 00 85 e4 	or	0x0001,%r4,%r5
- 168:	02 00 e8 e4 	or	0x0002,%r7,%r8
- 16c:	03 00 4b e5 	or	0x0003,%r10,%r11
- 170:	e8 fd ae e5 	or	0xfde8,%r13,%r14
- 174:	ff ff 11 e6 	or	0xffff,%r16,%r17
- 178:	ff ff 74 e6 	or	0xffff,%r19,%r20
- 17c:	cd ab d7 e6 	or	0xabcd,%r22,%r23
- 180:	34 12 3a e7 	or	0x1234,%r25,%r26
- 184:	00 00 9d e7 	or	0x0000,%r28,%r29
- 188:	03 00 e0 e7 	or	0x0003,%r31,%r0
- 18c:	00 00 22 ec 	orh	0x0000,%r1,%sp
- 190:	01 00 85 ec 	orh	0x0001,%r4,%r5
- 194:	02 00 e8 ec 	orh	0x0002,%r7,%r8
- 198:	03 00 4b ed 	orh	0x0003,%r10,%r11
- 19c:	e8 fd ae ed 	orh	0xfde8,%r13,%r14
- 1a0:	ff ff 11 ee 	orh	0xffff,%r16,%r17
- 1a4:	ff ff 74 ee 	orh	0xffff,%r19,%r20
- 1a8:	cd ab d7 ee 	orh	0xabcd,%r22,%r23
- 1ac:	34 12 3a ef 	orh	0x1234,%r25,%r26
- 1b0:	00 00 9d ef 	orh	0x0000,%r28,%r29
- 1b4:	03 00 e0 ef 	orh	0x0003,%r31,%r0
- 1b8:	00 00 22 f4 	xor	0x0000,%r1,%sp
- 1bc:	01 00 85 f4 	xor	0x0001,%r4,%r5
- 1c0:	02 00 e8 f4 	xor	0x0002,%r7,%r8
- 1c4:	03 00 4b f5 	xor	0x0003,%r10,%r11
- 1c8:	e8 fd ae f5 	xor	0xfde8,%r13,%r14
- 1cc:	ff ff 11 f6 	xor	0xffff,%r16,%r17
- 1d0:	ff ff 74 f6 	xor	0xffff,%r19,%r20
- 1d4:	cd ab d7 f6 	xor	0xabcd,%r22,%r23
- 1d8:	34 12 3a f7 	xor	0x1234,%r25,%r26
- 1dc:	00 00 9d f7 	xor	0x0000,%r28,%r29
- 1e0:	03 00 e0 f7 	xor	0x0003,%r31,%r0
- 1e4:	00 00 22 fc 	xorh	0x0000,%r1,%sp
- 1e8:	01 00 85 fc 	xorh	0x0001,%r4,%r5
- 1ec:	02 00 e8 fc 	xorh	0x0002,%r7,%r8
- 1f0:	03 00 4b fd 	xorh	0x0003,%r10,%r11
- 1f4:	e8 fd ae fd 	xorh	0xfde8,%r13,%r14
- 1f8:	ff ff 11 fe 	xorh	0xffff,%r16,%r17
- 1fc:	ff ff 74 fe 	xorh	0xffff,%r19,%r20
- 200:	cd ab d7 fe 	xorh	0xabcd,%r22,%r23
- 204:	34 12 3a ff 	xorh	0x1234,%r25,%r26
- 208:	00 00 9d ff 	xorh	0x0000,%r28,%r29
- 20c:	03 00 e0 ff 	xorh	0x0003,%r31,%r0
diff --git a/gas/testsuite/gas/i860/bitwise.s b/gas/testsuite/gas/i860/bitwise.s
deleted file mode 100644
index 531c787..0000000
--- a/gas/testsuite/gas/i860/bitwise.s
+++ /dev/null
@@ -1,150 +0,0 @@
-# and, andh, andnot, andnoth, or, orh, xor, xorh 
-
-	.text
-
-	# Register forms (high variants do not have register forms).
-	and	%r0,%r1,%r2
-	and	%r3,%r4,%r5
-	and	%r6,%r7,%r8
-	and	%r9,%r10,%r11
-	and	%r12,%r13,%r14
-	and	%r15,%r16,%r17
-	and	%r18,%r19,%r20
-	and	%r21,%r22,%r23
-	and	%r24,%r25,%r26
-	and	%r27,%r28,%r29
-	and	%r30,%r31,%r0
-
-	andnot	%r0,%r1,%r2
-	andnot	%r3,%r4,%r5
-	andnot	%r6,%r7,%r8
-	andnot	%r9,%r10,%r11
-	andnot	%r12,%r13,%r14
-	andnot	%r15,%r16,%r17
-	andnot	%r18,%r19,%r20
-	andnot	%r21,%r22,%r23
-	andnot	%r24,%r25,%r26
-	andnot	%r27,%r28,%r29
-	andnot	%r30,%r31,%r0
-
-	or	%r0,%r1,%r2
-	or	%r3,%r4,%r5
-	or	%r6,%r7,%r8
-	or	%r9,%r10,%r11
-	or	%r12,%r13,%r14
-	or	%r15,%r16,%r17
-	or	%r18,%r19,%r20
-	or	%r21,%r22,%r23
-	or	%r24,%r25,%r26
-	or	%r27,%r28,%r29
-	or	%r30,%r31,%r0
-
-	xor	%r0,%r1,%r2
-	xor	%r3,%r4,%r5
-	xor	%r6,%r7,%r8
-	xor	%r9,%r10,%r11
-	xor	%r12,%r13,%r14
-	xor	%r15,%r16,%r17
-	xor	%r18,%r19,%r20
-	xor	%r21,%r22,%r23
-	xor	%r24,%r25,%r26
-	xor	%r27,%r28,%r29
-	xor	%r30,%r31,%r0
-
-	# Immediate forms (all)
-	and	0,%r1,%r2
-	and	8192,%r4,%r5
-	and	5109,%r7,%r8
-	and	32768,%r10,%r11
-	and	65000,%r13,%r14
-	and	65535,%r16,%r17
-	and	0xffff,%r19,%r20
-	and	0xabcd,%r22,%r23
-	and	0x1234,%r25,%r26
-	and	0x0,%r28,%r29
-	and	0x3,%r31,%r0
-
-	andh	1,%r1,%r2
-	andh	8193,%r4,%r5
-	andh	5110,%r7,%r8
-	andh	32769,%r10,%r11
-	andh	65001,%r13,%r14
-	andh	65535,%r16,%r17
-	andh	0xffff,%r19,%r20
-	andh	0xabcd,%r22,%r23
-	andh	0x1234,%r25,%r26
-	andh	0x0,%r28,%r29
-	andh	0x3,%r31,%r0
-
-	andnot	0,%r1,%r2
-	andnot	8192,%r4,%r5
-	andnot	5109,%r7,%r8
-	andnot	32768,%r10,%r11
-	andnot	65000,%r13,%r14
-	andnot	65535,%r16,%r17
-	andnot	0xffff,%r19,%r20
-	andnot	0xabcd,%r22,%r23
-	andnot	0x1234,%r25,%r26
-	andnot	0x0,%r28,%r29
-	andnot	0x3,%r31,%r0
-
-	andnoth	1,%r1,%r2
-	andnoth	8193,%r4,%r5
-	andnoth	5110,%r7,%r8
-	andnoth	32769,%r10,%r11
-	andnoth	65001,%r13,%r14
-	andnoth	65535,%r16,%r17
-	andnoth	0xffff,%r19,%r20
-	andnoth	0xabcd,%r22,%r23
-	andnoth	0x1234,%r25,%r26
-	andnoth	0x0,%r28,%r29
-	andnoth	0x3,%r31,%r0
-
-	or	0,%r1,%r2
-	or	1,%r4,%r5
-	or	2,%r7,%r8
-	or	3,%r10,%r11
-	or	65000,%r13,%r14
-	or	65535,%r16,%r17
-	or	0xffff,%r19,%r20
-	or	0xabcd,%r22,%r23
-	or	0x1234,%r25,%r26
-	or	0x0,%r28,%r29
-	or	0x3,%r31,%r0
-
-	orh	0,%r1,%r2
-	orh	1,%r4,%r5
-	orh	2,%r7,%r8
-	orh	3,%r10,%r11
-	orh	65000,%r13,%r14
-	orh	65535,%r16,%r17
-	orh	0xffff,%r19,%r20
-	orh	0xabcd,%r22,%r23
-	orh	0x1234,%r25,%r26
-	orh	0x0,%r28,%r29
-	orh	0x3,%r31,%r0
-
-	xor	0,%r1,%r2
-	xor	1,%r4,%r5
-	xor	2,%r7,%r8
-	xor	3,%r10,%r11
-	xor	65000,%r13,%r14
-	xor	65535,%r16,%r17
-	xor	0xffff,%r19,%r20
-	xor	0xabcd,%r22,%r23
-	xor	0x1234,%r25,%r26
-	xor	0x0,%r28,%r29
-	xor	0x3,%r31,%r0
-
-	xorh	0,%r1,%r2
-	xorh	1,%r4,%r5
-	xorh	2,%r7,%r8
-	xorh	3,%r10,%r11
-	xorh	65000,%r13,%r14
-	xorh	65535,%r16,%r17
-	xorh	0xffff,%r19,%r20
-	xorh	0xabcd,%r22,%r23
-	xorh	0x1234,%r25,%r26
-	xorh	0x0,%r28,%r29
-	xorh	0x3,%r31,%r0
-
diff --git a/gas/testsuite/gas/i860/branch.d b/gas/testsuite/gas/i860/branch.d
deleted file mode 100644
index eba23d6..0000000
--- a/gas/testsuite/gas/i860/branch.d
+++ /dev/null
@@ -1,81 +0,0 @@
-#as:
-#objdump: -dr
-#name: i860 branch
-
-.*: +file format .*
-
-Disassembly of section .text:
-
-00000000 <.text>:
-   0:	3d 00 20 b4 	bla	%r0,%r1,0x000000f8	// 0xf8
-   4:	00 00 00 a0 	shl	%r0,%r0,%r0
-   8:	3d 28 e0 b7 	bla	%r5,%r31,0x00000100	// 0x100
-   c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  10:	39 b8 00 b6 	bla	%r23,%r16,0x000000f8	// 0xf8
-  14:	00 00 00 a0 	shl	%r0,%r0,%r0
-  18:	39 20 60 b6 	bla	%r4,%r19,0x00000100	// 0x100
-  1c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  20:	00 00 00 40 	bri	%r0
-  24:	00 00 00 a0 	shl	%r0,%r0,%r0
-  28:	00 08 00 40 	bri	%r1
-  2c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  30:	00 f8 00 40 	bri	%r31
-  34:	00 00 00 a0 	shl	%r0,%r0,%r0
-  38:	00 08 00 40 	bri	%r1
-  3c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  40:	00 60 00 40 	bri	%r12
-  44:	00 00 00 a0 	shl	%r0,%r0,%r0
-  48:	00 98 00 40 	bri	%r19
-  4c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  50:	02 00 00 4c 	calli	%r0
-  54:	00 00 00 a0 	shl	%r0,%r0,%r0
-  58:	02 08 00 4c 	calli	%r1
-  5c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  60:	02 f8 00 4c 	calli	%r31
-  64:	00 00 00 a0 	shl	%r0,%r0,%r0
-  68:	02 28 00 4c 	calli	%r5
-  6c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  70:	02 b0 00 4c 	calli	%r22
-  74:	00 00 00 a0 	shl	%r0,%r0,%r0
-  78:	02 48 00 4c 	calli	%r9
-  7c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  80:	1d 00 00 68 	br	0x000000f8	// 0xf8
-  84:	00 00 00 a0 	shl	%r0,%r0,%r0
-  88:	1d 00 00 68 	br	0x00000100	// 0x100
-  8c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  90:	00 00 00 68 	br	0x00000094	// 0x94
-			90: R_860_PC26	some_fake_extern
-  94:	00 00 00 a0 	shl	%r0,%r0,%r0
-  98:	17 00 00 6c 	call	0x000000f8	// 0xf8
-  9c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  a0:	17 00 00 6c 	call	0x00000100	// 0x100
-  a4:	00 00 00 a0 	shl	%r0,%r0,%r0
-  a8:	00 00 00 6c 	call	0x000000ac	// 0xac
-			a8: R_860_PC26	some_fake_extern
-  ac:	00 00 00 a0 	shl	%r0,%r0,%r0
-  b0:	02 00 00 70 	bc	0x000000bc	// 0xbc
-  b4:	10 00 00 70 	bc	0x000000f8	// 0xf8
-  b8:	00 00 00 70 	bc	0x000000bc	// 0xbc
-			b8: R_860_PC26	some_fake_extern
-  bc:	ff ff ff 77 	bc.t	0x000000bc	// 0xbc
-  c0:	00 00 00 a0 	shl	%r0,%r0,%r0
-  c4:	0c 00 00 74 	bc.t	0x000000f8	// 0xf8
-  c8:	00 00 00 a0 	shl	%r0,%r0,%r0
-  cc:	00 00 00 74 	bc.t	0x000000d0	// 0xd0
-			cc: R_860_PC26	some_fake_extern
-  d0:	00 00 00 a0 	shl	%r0,%r0,%r0
-  d4:	02 00 00 78 	bnc	0x000000e0	// 0xe0
-  d8:	07 00 00 78 	bnc	0x000000f8	// 0xf8
-  dc:	00 00 00 78 	bnc	0x000000e0	// 0xe0
-			dc: R_860_PC26	some_fake_extern
-  e0:	ff ff ff 7f 	bnc.t	0x000000e0	// 0xe0
-  e4:	00 00 00 a0 	shl	%r0,%r0,%r0
-  e8:	03 00 00 7c 	bnc.t	0x000000f8	// 0xf8
-  ec:	00 00 00 a0 	shl	%r0,%r0,%r0
-  f0:	00 00 00 7c 	bnc.t	0x000000f4	// 0xf4
-			f0: R_860_PC26	some_fake_extern
-  f4:	00 00 00 a0 	shl	%r0,%r0,%r0
-  f8:	00 00 00 a0 	shl	%r0,%r0,%r0
-  fc:	00 00 00 a0 	shl	%r0,%r0,%r0
- 100:	00 00 00 a0 	shl	%r0,%r0,%r0
- 104:	00 00 00 a0 	shl	%r0,%r0,%r0
diff --git a/gas/testsuite/gas/i860/branch.s b/gas/testsuite/gas/i860/branch.s
deleted file mode 100644
index 3df2758..0000000
--- a/gas/testsuite/gas/i860/branch.s
+++ /dev/null
@@ -1,85 +0,0 @@
-# Branches and calls
-
-	.text
-
-	bla	%r0,%r1,.Lsome_label1
-	nop
-	bla	%r5,%r31,.Lsome_label2
-	nop
-	bla	%r23,%r16,.Lsome_label1
-	nop
-	bla	%r4,%r19,.Lsome_label2
-	nop
-
-	bri	%r0	
-	nop
-	bri	%r1	
-	nop
-	bri	%r31	
-	nop
-	bri	%r1	
-	nop
-	bri	%r12	
-	nop
-	bri	%r19	
-	nop
-
-	calli	%r0	
-	nop
-	calli	%r1	
-	nop
-	calli	%r31	
-	nop
-	calli	%r5	
-	nop
-	calli	%r22	
-	nop
-	calli	%r9	
-	nop
-
-	br	.Lsome_label1
-	nop
-	br	.Lsome_label2
-	nop
-	br	some_fake_extern
-	nop
-
-	call	.Lcall_me_now
-	nop
-	call	.Lcall_me_anytime
-	nop
-	call	some_fake_extern
-	nop
-
-	bc	.+12
-	bc	.Lsome_label1
-	bc	some_fake_extern
-
-	bc.t	.+0
-	nop
-	bc.t	.Lsome_label1
-	nop
-	bc.t	some_fake_extern
-	nop
-
-	bnc	.+12
-	bnc	.Lsome_label1
-	bnc	some_fake_extern
-
-	bnc.t	.+0
-	nop
-	bnc.t	.Lsome_label1
-	nop
-	bnc.t	some_fake_extern
-	nop
-
-
-.Lsome_label1:
-.Lcall_me_now:
-	nop
-	nop
-.Lsome_label2:
-.Lcall_me_anytime:
-	nop
-	nop
-
diff --git a/gas/testsuite/gas/i860/bte.d b/gas/testsuite/gas/i860/bte.d
deleted file mode 100644
index a8f4404..0000000
--- a/gas/testsuite/gas/i860/bte.d
+++ /dev/null
@@ -1,62 +0,0 @@
-#as:
-#objdump: -dr
-#name: i860 bte/btne
-
-.*: +file format .*
-
-Disassembly of section \.text:
-
-00000000 <some_label-0xb8>:
-   0:	2d 00 e0 57 	btne	0,%r31,0x000000b8	// b8 <some_label>
-   4:	2c 08 a0 57 	btne	1,%r29,0x000000b8	// b8 <some_label>
-   8:	2b 10 60 57 	btne	2,%r27,0x000000b8	// b8 <some_label>
-   c:	2a 18 20 57 	btne	3,%r25,0x000000b8	// b8 <some_label>
-  10:	29 50 e0 56 	btne	10,%r23,0x000000b8	// b8 <some_label>
-  14:	28 58 a0 56 	btne	11,%r21,0x000000b8	// b8 <some_label>
-  18:	27 60 60 56 	btne	12,%r19,0x000000b8	// b8 <some_label>
-  1c:	26 e8 20 56 	btne	29,%r17,0x000000b8	// b8 <some_label>
-  20:	25 f0 00 56 	btne	30,%r16,0x000000b8	// b8 <some_label>
-  24:	24 f8 00 55 	btne	31,%r8,0x000000b8	// b8 <some_label>
-  28:	00 78 00 54 	btne	15,%r0,0x0000002c	// 2c <some_label-0x8c>
-			28: R_860_PC16	some_fake_extern
-  2c:	22 00 e0 5f 	bte	0,%r31,0x000000b8	// b8 <some_label>
-  30:	21 08 a0 5f 	bte	1,%r29,0x000000b8	// b8 <some_label>
-  34:	20 10 60 5f 	bte	2,%r27,0x000000b8	// b8 <some_label>
-  38:	1f 18 20 5f 	bte	3,%r25,0x000000b8	// b8 <some_label>
-  3c:	1e 50 e0 5e 	bte	10,%r23,0x000000b8	// b8 <some_label>
-  40:	1d 58 a0 5e 	bte	11,%r21,0x000000b8	// b8 <some_label>
-  44:	1c 60 60 5e 	bte	12,%r19,0x000000b8	// b8 <some_label>
-  48:	1b e8 20 5e 	bte	29,%r17,0x000000b8	// b8 <some_label>
-  4c:	1a f0 00 5e 	bte	30,%r16,0x000000b8	// b8 <some_label>
-  50:	19 f8 00 5d 	bte	31,%r8,0x000000b8	// b8 <some_label>
-  54:	00 78 00 5c 	bte	15,%r0,0x00000058	// 58 <some_label-0x60>
-			54: R_860_PC16	some_fake_extern
-  58:	17 00 e0 53 	btne	%r0,%r31,0x000000b8	// b8 <some_label>
-  5c:	16 08 a0 53 	btne	%r1,%r29,0x000000b8	// b8 <some_label>
-  60:	15 10 60 53 	btne	%sp,%r27,0x000000b8	// b8 <some_label>
-  64:	14 18 20 53 	btne	%fp,%r25,0x000000b8	// b8 <some_label>
-  68:	13 50 e0 52 	btne	%r10,%r23,0x000000b8	// b8 <some_label>
-  6c:	12 58 a0 52 	btne	%r11,%r21,0x000000b8	// b8 <some_label>
-  70:	11 60 60 52 	btne	%r12,%r19,0x000000b8	// b8 <some_label>
-  74:	10 e8 20 52 	btne	%r29,%r17,0x000000b8	// b8 <some_label>
-  78:	0f f0 00 52 	btne	%r30,%r16,0x000000b8	// b8 <some_label>
-  7c:	0e f8 00 51 	btne	%r31,%r8,0x000000b8	// b8 <some_label>
-  80:	00 78 00 50 	btne	%r15,%r0,0x00000084	// 84 <some_label-0x34>
-			80: R_860_PC16	some_fake_extern
-  84:	0c 00 e0 5b 	bte	%r0,%r31,0x000000b8	// b8 <some_label>
-  88:	0b 08 a0 5b 	bte	%r1,%r29,0x000000b8	// b8 <some_label>
-  8c:	0a 10 60 5b 	bte	%sp,%r27,0x000000b8	// b8 <some_label>
-  90:	09 18 20 5b 	bte	%fp,%r25,0x000000b8	// b8 <some_label>
-  94:	08 50 e0 5a 	bte	%r10,%r23,0x000000b8	// b8 <some_label>
-  98:	07 58 a0 5a 	bte	%r11,%r21,0x000000b8	// b8 <some_label>
-  9c:	06 60 60 5a 	bte	%r12,%r19,0x000000b8	// b8 <some_label>
-  a0:	05 e8 20 5a 	bte	%r29,%r17,0x000000b8	// b8 <some_label>
-  a4:	04 f0 00 5a 	bte	%r30,%r16,0x000000b8	// b8 <some_label>
-  a8:	03 f8 00 59 	bte	%r31,%r8,0x000000b8	// b8 <some_label>
-  ac:	00 78 00 58 	bte	%r15,%r0,0x000000b0	// b0 <some_label-0x8>
-			ac: R_860_PC16	some_fake_extern
-  b0:	00 00 00 a0 	shl	%r0,%r0,%r0
-  b4:	00 00 00 a0 	shl	%r0,%r0,%r0
-
-000000b8 <some_label>:
-  b8:	00 00 00 a0 	shl	%r0,%r0,%r0
diff --git a/gas/testsuite/gas/i860/bte.s b/gas/testsuite/gas/i860/bte.s
deleted file mode 100644
index cc6e576..0000000
--- a/gas/testsuite/gas/i860/bte.s
+++ /dev/null
@@ -1,55 +0,0 @@
-# bte, btne
-	.text
-
-	btne	0,%r31,some_label
-	btne	1,%r29,some_label
-	btne	2,%r27,some_label
-	btne	3,%r25,some_label
-	btne	10,%r23,some_label
-	btne	11,%r21,some_label
-	btne	12,%r19,some_label
-	btne	29,%r17,some_label
-	btne	30,%r16,some_label
-	btne	31,%r8,some_label
-	btne	15,%r0,some_fake_extern
-
-	bte	0,%r31,some_label
-	bte	1,%r29,some_label
-	bte	2,%r27,some_label
-	bte	3,%r25,some_label
-	bte	10,%r23,some_label
-	bte	11,%r21,some_label
-	bte	12,%r19,some_label
-	bte	29,%r17,some_label
-	bte	30,%r16,some_label
-	bte	31,%r8,some_label
-	bte	15,%r0,some_fake_extern
-
-	btne	%r0,%r31,some_label
-	btne	%r1,%r29,some_label
-	btne	%r2,%r27,some_label
-	btne	%r3,%r25,some_label
-	btne	%r10,%r23,some_label
-	btne	%r11,%r21,some_label
-	btne	%r12,%r19,some_label
-	btne	%r29,%r17,some_label
-	btne	%r30,%r16,some_label
-	btne	%r31,%r8,some_label
-	btne	%r15,%r0,some_fake_extern
-
-	bte	%r0,%r31,some_label
-	bte	%r1,%r29,some_label
-	bte	%r2,%r27,some_label
-	bte	%r3,%r25,some_label
-	bte	%r10,%r23,some_label
-	bte	%r11,%r21,some_label
-	bte	%r12,%r19,some_label
-	bte	%r29,%r17,some_label
-	bte	%r30,%r16,some_label
-	bte	%r31,%r8,some_label
-	bte	%r15,%r0,some_fake_extern
-
-	nop
-	nop
-some_label:
-	nop	
diff --git a/gas/testsuite/gas/i860/dir-align01.d b/gas/testsuite/gas/i860/dir-align01.d
deleted file mode 100644
index bc4f677..0000000
--- a/gas/testsuite/gas/i860/dir-align01.d
+++ /dev/null
@@ -1,17 +0,0 @@
-#as:
-#objdump: -d
-#name: i860 dir-align01
-
-.*: +file format .*
-
-Disassembly of section \.text:
-
-00000000 <\.text>:
-   0:	00 20 a6 90 	adds	%r4,%r5,%r6
-   4:	00 00 00 a0 	shl	%r0,%r0,%r0
-   8:	00 00 00 a0 	shl	%r0,%r0,%r0
-   c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  10:	00 50 6c 91 	adds	%r10,%r11,%r12
-  14:	a1 b1 1a 4b 	fmlow.dd	%f22,%f24,%f26
-  18:	30 74 f0 49 	pfadd.ss	%f14,%f15,%f16
-  1c:	b0 8c 54 4a 	pfadd.sd	%f17,%f18,%f20
diff --git a/gas/testsuite/gas/i860/dir-align01.s b/gas/testsuite/gas/i860/dir-align01.s
deleted file mode 100644
index 595eb3f..0000000
--- a/gas/testsuite/gas/i860/dir-align01.s
+++ /dev/null
@@ -1,11 +0,0 @@
-# Test that .text section alignments use nops (0xA0000000) to fill
-# rather than 0.
-	.text
-	adds	%r4,%r5,%r6
-	.align 16
-	adds	%r10,%r11,%r12
-        fmlow.dd        %f22,%f24,%f26
-        pfadd.ss        %f14,%f15,%f16
-        pfadd.sd        %f17,%f18,%f20
-
-
diff --git a/gas/testsuite/gas/i860/dir-intel01.d b/gas/testsuite/gas/i860/dir-intel01.d
deleted file mode 100644
index 0951bf3..0000000
--- a/gas/testsuite/gas/i860/dir-intel01.d
+++ /dev/null
@@ -1,19 +0,0 @@
-#as: -mintel-syntax
-#objdump: -d
-#name: i860 dir-intel01
-
-.*: +file format .*
-
-Disassembly of section \.text:
-
-00000000 <\.text>:
-   0:	00 00 00 a0 	shl	%r0,%r0,%r0
-   4:	00 00 00 a0 	shl	%r0,%r0,%r0
-   8:	30 02 22 48 	d.fadd.ss	%f0,%f1,%f2
-   c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  10:	b0 12 64 48 	d.fadd.sd	%f2,%f3,%f4
-  14:	00 00 00 a0 	shl	%r0,%r0,%r0
-  18:	b0 33 0a 49 	d.fadd.dd	%f6,%f8,%f10
-  1c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  20:	00 00 00 a0 	shl	%r0,%r0,%r0
-  24:	00 00 00 a0 	shl	%r0,%r0,%r0
diff --git a/gas/testsuite/gas/i860/dir-intel01.s b/gas/testsuite/gas/i860/dir-intel01.s
deleted file mode 100644
index 21aa685..0000000
--- a/gas/testsuite/gas/i860/dir-intel01.s
+++ /dev/null
@@ -1,19 +0,0 @@
-// Intel assembler directives:
-// Test that the .dual and .enddual directives are recognized and
-// function (i.e., that the dual bits are set properly).
-
-	.text
-
-	nop
-	nop
-	.dual
-        fadd.ss       f0,f1,f2
-        nop
-        fadd.sd       f2,f3,f4
-        nop
-        fadd.dd       f6,f8,f10
-        nop
-	.enddual
-	nop
-	nop
-
diff --git a/gas/testsuite/gas/i860/dir-intel02.d b/gas/testsuite/gas/i860/dir-intel02.d
deleted file mode 100644
index f053967..0000000
--- a/gas/testsuite/gas/i860/dir-intel02.d
+++ /dev/null
@@ -1,15 +0,0 @@
-#as: -mintel-syntax
-#objdump: -d
-#name: i860 dir-intel02
-
-.*: +file format .*
-
-Disassembly of section \.text:
-
-00000000 <\.text>:
-   0:	34 12 1f ec 	orh	0x1234,%r0,%r31
-   4:	78 56 f8 e7 	or	0x5678,%r31,%r24
-   8:	00 c0 28 91 	adds	%r24,%r9,%r8
-   c:	f0 f0 05 ec 	orh	0xf0f0,%r0,%r5
-  10:	5a 5a b8 e4 	or	0x5a5a,%r5,%r24
-  14:	00 c0 28 91 	adds	%r24,%r9,%r8
diff --git a/gas/testsuite/gas/i860/dir-intel02.s b/gas/testsuite/gas/i860/dir-intel02.s
deleted file mode 100644
index a1a1613..0000000
--- a/gas/testsuite/gas/i860/dir-intel02.s
+++ /dev/null
@@ -1,13 +0,0 @@
-// Intel assembler directives:
-// Test that the .atmp directive is recognized and functions.
-
-	.text
-
-	.atmp r31
-	or	0x12345678,r0,r24
-	adds	r24,r9,r8
-
-	.atmp r5
-	or	0xf0f05a5a,r0,r24
-	adds	r24,r9,r8
-
diff --git a/gas/testsuite/gas/i860/dir-intel03-err.l b/gas/testsuite/gas/i860/dir-intel03-err.l
deleted file mode 100644
index b826128..0000000
--- a/gas/testsuite/gas/i860/dir-intel03-err.l
+++ /dev/null
@@ -1,5 +0,0 @@
-.*: Assembler messages:
-.*:8: Error: Directive .atmp available only with -mintel-syntax option
-.*:8: Error: junk at end of line, first unrecognized character is `r'
-.*:10: Error: Directive .dual available only with -mintel-syntax option
-.*:13: Error: Directive .enddual available only with -mintel-syntax option
diff --git a/gas/testsuite/gas/i860/dir-intel03-err.s b/gas/testsuite/gas/i860/dir-intel03-err.s
deleted file mode 100644
index b8b0790..0000000
--- a/gas/testsuite/gas/i860/dir-intel03-err.s
+++ /dev/null
@@ -1,14 +0,0 @@
-# Intel assembler directives:
-# The .dual, .enddual, and .atmp directives are valid only
-# in Intel syntax mode.  Check that we issue an error if in
-# AT&T/SVR4 mode.
-
-	.text
-
-	.atmp r31
-
-	.dual
-	fsub.ss	%f22,%f21,%f13
-	nop
-	.enddual
-
diff --git a/gas/testsuite/gas/i860/dual01.d b/gas/testsuite/gas/i860/dual01.d
deleted file mode 100644
index ee182e0..0000000
--- a/gas/testsuite/gas/i860/dual01.d
+++ /dev/null
@@ -1,21 +0,0 @@
-#as:
-#objdump: -d
-#name: i860 dual01
-
-.*: +file format .*
-
-Disassembly of section \.text:
-
-00000000 <\.text>:
-   0:	00 00 00 a0 	shl	%r0,%r0,%r0
-   4:	00 00 00 a0 	shl	%r0,%r0,%r0
-   8:	b0 47 4c 49 	d.pfadd.dd	%f8,%f10,%f12
-   c:	00 28 c6 90 	adds	%r5,%r6,%r6
-  10:	b0 47 4c 49 	d.pfadd.dd	%f8,%f10,%f12
-  14:	10 00 58 25 	fld.d	16\(%r10\),%f24
-  18:	00 02 00 b0 	d.shrd	%r0,%r0,%r0
-  1c:	08 00 48 25 	fld.d	8\(%r10\),%f8
-  20:	00 02 00 b0 	d.shrd	%r0,%r0,%r0
-  24:	00 00 50 25 	fld.d	0\(%r10\),%f16
-  28:	00 00 00 a0 	shl	%r0,%r0,%r0
-  2c:	00 00 00 a0 	shl	%r0,%r0,%r0
diff --git a/gas/testsuite/gas/i860/dual01.s b/gas/testsuite/gas/i860/dual01.s
deleted file mode 100644
index e7aa271..0000000
--- a/gas/testsuite/gas/i860/dual01.s
+++ /dev/null
@@ -1,17 +0,0 @@
-# Test fnop's dual bit (all other floating point operations have their dual
-# bit tested in their individual test files).
-
-	.text
-	.align 8
-	nop
-	nop
-        d.pfadd.dd      %f8,%f10,%f12
-        adds	%r5,%r6,%r6
-        d.pfadd.dd      %f8,%f10,%f12
-        fld.d   16(%r10),%f24
-        d.fnop
-        fld.d   8(%r10),%f8
-        d.fnop
-        fld.d   0(%r10),%f16
-	nop
-	nop
diff --git a/gas/testsuite/gas/i860/dual02-err.l b/gas/testsuite/gas/i860/dual02-err.l
deleted file mode 100644
index d43d73e..0000000
--- a/gas/testsuite/gas/i860/dual02-err.l
+++ /dev/null
@@ -1,2 +0,0 @@
-.*: Assembler messages:
-.*:7: Error: 'd\.fadd\.ss' must be 8-byte aligned
diff --git a/gas/testsuite/gas/i860/dual02-err.s b/gas/testsuite/gas/i860/dual02-err.s
deleted file mode 100644
index 05d1835..0000000
--- a/gas/testsuite/gas/i860/dual02-err.s
+++ /dev/null
@@ -1,9 +0,0 @@
-# Dual-mode pairs must be aligned on an 8-byte boundary.  This tests
-# that an error is reported if not properly aligned.
-
-	.text
-	.align 8
-	nop
-	d.fadd.ss	%f3,%f5,%f7
-	addu	%r4,%r5,%r6
-
diff --git a/gas/testsuite/gas/i860/dual03.d b/gas/testsuite/gas/i860/dual03.d
deleted file mode 100644
index 30c0130f..0000000
--- a/gas/testsuite/gas/i860/dual03.d
+++ /dev/null
@@ -1,53 +0,0 @@
-#as: -mintel-syntax
-#objdump: -d
-#name: i860 dual03
-
-.*: +file format .*
-
-Disassembly of section \.text:
-
-00000000 <L1-0x20>:
-   0:	00 00 14 22 	fld.d	%r0\(%r16\),%f20
-   4:	fe ff 15 94 	adds	-2,%r0,%r21
-   8:	30 06 00 48 	d.pfadd.ss	%f0,%f0,%f0
-   c:	fa ff 31 96 	adds	-6,%r17,%r17
-  10:	30 06 00 48 	d.pfadd.ss	%f0,%f0,%f0
-  14:	02 a8 20 b6 	bla	%r21,%r17,0x00000020	// 20 <L1>
-  18:	30 06 00 48 	d.pfadd.ss	%f0,%f0,%f0
-  1c:	09 00 16 26 	fld.d	8\(%r16\)\+\+,%f22
-
-00000020 <L1>:
-  20:	30 a6 de 4b 	d.pfadd.ss	%f20,%f30,%f30
-  24:	06 a8 20 b6 	bla	%r21,%r17,0x00000040	// 40 <L2>
-  28:	30 ae ff 4b 	d.pfadd.ss	%f21,%f31,%f31
-  2c:	09 00 14 26 	fld.d	8\(%r16\)\+\+,%f20
-  30:	30 a6 de 4b 	d.pfadd.ss	%f20,%f30,%f30
-  34:	0a 00 00 68 	br	0x00000060	// 60 <S>
-  38:	30 ae ff 4b 	d.pfadd.ss	%f21,%f31,%f31
-  3c:	00 00 00 a0 	shl	%r0,%r0,%r0
-
-00000040 <L2>:
-  40:	30 b6 de 4b 	d.pfadd.ss	%f22,%f30,%f30
-  44:	f6 af 3f b6 	bla	%r21,%r17,0x00000020	// 20 <L1>
-  48:	30 be ff 4b 	d.pfadd.ss	%f23,%f31,%f31
-  4c:	09 00 16 26 	fld.d	8\(%r16\)\+\+,%f22
-  50:	30 a6 de 4b 	d.pfadd.ss	%f20,%f30,%f30
-  54:	00 00 00 a0 	shl	%r0,%r0,%r0
-  58:	30 ae ff 4b 	d.pfadd.ss	%f21,%f31,%f31
-  5c:	00 00 00 a0 	shl	%r0,%r0,%r0
-
-00000060 <S>:
-  60:	30 b4 de 4b 	pfadd.ss	%f22,%f30,%f30
-  64:	fc ff 15 94 	adds	-4,%r0,%r21
-  68:	30 bc ff 4b 	pfadd.ss	%f23,%f31,%f31
-  6c:	02 a8 20 5a 	bte	%r21,%r17,0x00000078	// 78 <DONE>
-  70:	0b 00 14 26 	fld.l	8\(%r16\)\+\+,%f20
-  74:	30 a4 de 4b 	pfadd.ss	%f20,%f30,%f30
-
-00000078 <DONE>:
-  78:	30 04 1e 48 	pfadd.ss	%f0,%f0,%f30
-  7c:	30 f4 ff 4b 	pfadd.ss	%f30,%f31,%f31
-  80:	30 04 1e 48 	pfadd.ss	%f0,%f0,%f30
-  84:	30 04 00 48 	pfadd.ss	%f0,%f0,%f0
-  88:	30 04 1f 48 	pfadd.ss	%f0,%f0,%f31
-  8c:	30 f0 f0 4b 	fadd.ss	%f30,%f31,%f16
diff --git a/gas/testsuite/gas/i860/dual03.s b/gas/testsuite/gas/i860/dual03.s
deleted file mode 100644
index 96c3134..0000000
--- a/gas/testsuite/gas/i860/dual03.s
+++ /dev/null
@@ -1,46 +0,0 @@
-// A larger dual-mode test, from the programmer's reference manual.
-// This uses Intel syntax, as in the manual.
-
-// Single-precision vector sum
-	fld.d	r0(r16),f20
-	mov	-2,r21
-	d.pfadd.ss	f0,f0,f0
-	adds	-6,r17,r17
-	d.pfadd.ss	f0,f0,f0
-	bla	r21,r17,L1
-	d.pfadd.ss	f0,f0,f0
-	fld.d	8(r16)++,f22
-L1:
-	d.pfadd.ss	f20,f30,f30
-	bla	r21,r17,L2
-	d.pfadd.ss	f21,f31,f31
-	fld.d	8(r16)++,f20
-	d.pfadd.ss	f20,f30,f30
-	br	S
-	d.pfadd.ss	f21,f31,f31
-	nop
-L2:
-	d.pfadd.ss	f22,f30,f30
-	bla	r21,r17,L1
-	d.pfadd.ss	f23,f31,f31
-	fld.d	8(r16)++,f22
-	d.pfadd.ss	f20,f30,f30
-	nop
-	d.pfadd.ss	f21,f31,f31
-	nop
-S:
-	pfadd.ss	f22,f30,f30
-	mov	-4,r21
-	pfadd.ss	f23,f31,f31
-	bte	r21,r17,DONE
-	fld.l	8(r16)++,f20
-	pfadd.ss	f20,f30,f30
-DONE:
-	pfadd.ss	f0,f0,f30
-	pfadd.ss	f30,f31,f31
-	pfadd.ss	f0,f0,f30
-	pfadd.ss	f0,f0,f0
-	pfadd.ss	f0,f0,f31
-	fadd.ss		f30,f31,f16
-
-	
diff --git a/gas/testsuite/gas/i860/fldst01.d b/gas/testsuite/gas/i860/fldst01.d
deleted file mode 100644
index b404d3d..0000000
--- a/gas/testsuite/gas/i860/fldst01.d
+++ /dev/null
@@ -1,73 +0,0 @@
-#as:
-#objdump: -dr
-#name: i860 fldst01 (fld.l)
-
-.*: +file format .*
-
-Disassembly of section \.text:
-
-00000000 <\.text>:
-   0:	02 00 00 24 	fld.l	0\(%r0\),%f0
-   4:	7e 00 3f 24 	fld.l	124\(%r1\),%f31
-   8:	02 01 5e 24 	fld.l	256\(%sp\),%f30
-   c:	02 02 7d 24 	fld.l	512\(%fp\),%f29
-  10:	02 04 9c 24 	fld.l	1024\(%r4\),%f28
-  14:	02 10 bb 24 	fld.l	4096\(%r5\),%f27
-  18:	02 20 da 24 	fld.l	8192\(%r6\),%f26
-  1c:	02 40 f9 24 	fld.l	16384\(%r7\),%f25
-  20:	fe 7f f9 24 	fld.l	32764\(%r7\),%f25
-  24:	02 80 f7 24 	fld.l	-32768\(%r7\),%f23
-  28:	02 c0 02 25 	fld.l	-16384\(%r8\),%f2
-  2c:	02 e0 23 25 	fld.l	-8192\(%r9\),%f3
-  30:	02 f0 48 25 	fld.l	-4096\(%r10\),%f8
-  34:	02 fc 69 25 	fld.l	-1024\(%r11\),%f9
-  38:	06 fe 8c 25 	fld.l	-508\(%r12\),%f12
-  3c:	0a ff b3 25 	fld.l	-248\(%r13\),%f19
-  40:	fe ff d5 25 	fld.l	-4\(%r14\),%f21
-  44:	03 00 00 24 	fld.l	0\(%r0\)\+\+,%f0
-  48:	7f 00 21 24 	fld.l	124\(%r1\)\+\+,%f1
-  4c:	03 01 42 24 	fld.l	256\(%sp\)\+\+,%f2
-  50:	03 02 63 24 	fld.l	512\(%fp\)\+\+,%f3
-  54:	03 04 84 24 	fld.l	1024\(%r4\)\+\+,%f4
-  58:	03 10 a5 24 	fld.l	4096\(%r5\)\+\+,%f5
-  5c:	03 20 c6 24 	fld.l	8192\(%r6\)\+\+,%f6
-  60:	03 40 e7 24 	fld.l	16384\(%r7\)\+\+,%f7
-  64:	ff 7f e8 24 	fld.l	32764\(%r7\)\+\+,%f8
-  68:	03 80 e9 24 	fld.l	-32768\(%r7\)\+\+,%f9
-  6c:	03 c0 0a 25 	fld.l	-16384\(%r8\)\+\+,%f10
-  70:	03 e0 2b 25 	fld.l	-8192\(%r9\)\+\+,%f11
-  74:	03 f0 4c 25 	fld.l	-4096\(%r10\)\+\+,%f12
-  78:	03 fc 6d 25 	fld.l	-1024\(%r11\)\+\+,%f13
-  7c:	07 fe 8e 25 	fld.l	-508\(%r12\)\+\+,%f14
-  80:	0b ff af 25 	fld.l	-248\(%r13\)\+\+,%f15
-  84:	ff ff d0 25 	fld.l	-4\(%r14\)\+\+,%f16
-  88:	02 28 00 20 	fld.l	%r5\(%r0\),%f0
-  8c:	02 30 3f 20 	fld.l	%r6\(%r1\),%f31
-  90:	02 38 5e 20 	fld.l	%r7\(%sp\),%f30
-  94:	02 40 7d 20 	fld.l	%r8\(%fp\),%f29
-  98:	02 48 9c 20 	fld.l	%r9\(%r4\),%f28
-  9c:	02 00 bb 20 	fld.l	%r0\(%r5\),%f27
-  a0:	02 08 da 20 	fld.l	%r1\(%r6\),%f26
-  a4:	02 60 f9 20 	fld.l	%r12\(%r7\),%f25
-  a8:	02 68 18 21 	fld.l	%r13\(%r8\),%f24
-  ac:	02 70 37 21 	fld.l	%r14\(%r9\),%f23
-  b0:	02 78 56 21 	fld.l	%r15\(%r10\),%f22
-  b4:	02 80 75 21 	fld.l	%r16\(%r11\),%f21
-  b8:	02 88 94 21 	fld.l	%r17\(%r12\),%f20
-  bc:	02 e0 b3 21 	fld.l	%r28\(%r13\),%f19
-  c0:	02 f8 d2 21 	fld.l	%r31\(%r14\),%f18
-  c4:	03 28 00 20 	fld.l	%r5\(%r0\)\+\+,%f0
-  c8:	03 30 21 20 	fld.l	%r6\(%r1\)\+\+,%f1
-  cc:	03 38 42 20 	fld.l	%r7\(%sp\)\+\+,%f2
-  d0:	03 40 63 20 	fld.l	%r8\(%fp\)\+\+,%f3
-  d4:	03 48 84 20 	fld.l	%r9\(%r4\)\+\+,%f4
-  d8:	03 00 a5 20 	fld.l	%r0\(%r5\)\+\+,%f5
-  dc:	03 08 c6 20 	fld.l	%r1\(%r6\)\+\+,%f6
-  e0:	03 60 e7 20 	fld.l	%r12\(%r7\)\+\+,%f7
-  e4:	03 68 08 21 	fld.l	%r13\(%r8\)\+\+,%f8
-  e8:	03 70 29 21 	fld.l	%r14\(%r9\)\+\+,%f9
-  ec:	03 78 4a 21 	fld.l	%r15\(%r10\)\+\+,%f10
-  f0:	03 80 6b 21 	fld.l	%r16\(%r11\)\+\+,%f11
-  f4:	03 88 8c 21 	fld.l	%r17\(%r12\)\+\+,%f12
-  f8:	03 e0 ad 21 	fld.l	%r28\(%r13\)\+\+,%f13
-  fc:	03 f8 ce 21 	fld.l	%r31\(%r14\)\+\+,%f14
diff --git a/gas/testsuite/gas/i860/fldst01.s b/gas/testsuite/gas/i860/fldst01.s
deleted file mode 100644
index 109cba8..0000000
--- a/gas/testsuite/gas/i860/fldst01.s
+++ /dev/null
@@ -1,75 +0,0 @@
-# fld.l (no relocations here)
-	.text
-
-	# Immediate form, no auto-increment.
-	fld.l	0(%r0),%f0
-	fld.l	124(%r1),%f31
-	fld.l	256(%r2),%f30
-	fld.l	512(%r3),%f29
-	fld.l	1024(%r4),%f28
-	fld.l	4096(%r5),%f27
-	fld.l	8192(%r6),%f26
-	fld.l	16384(%r7),%f25
-	fld.l	32764(%r7),%f25
-	fld.l	-32768(%r7),%f23
-	fld.l	-16384(%r8),%f2
-	fld.l	-8192(%r9),%f3
-	fld.l	-4096(%r10),%f8
-	fld.l	-1024(%r11),%f9
-	fld.l	-508(%r12),%f12
-	fld.l	-248(%r13),%f19
-	fld.l	-4(%r14),%f21
-
-	# Immediate form, with auto-increment.
-	fld.l	0(%r0)++,%f0
-	fld.l	124(%r1)++,%f1
-	fld.l	256(%r2)++,%f2
-	fld.l	512(%r3)++,%f3
-	fld.l	1024(%r4)++,%f4
-	fld.l	4096(%r5)++,%f5
-	fld.l	8192(%r6)++,%f6
-	fld.l	16384(%r7)++,%f7
-	fld.l	32764(%r7)++,%f8
-	fld.l	-32768(%r7)++,%f9
-	fld.l	-16384(%r8)++,%f10
-	fld.l	-8192(%r9)++,%f11
-	fld.l	-4096(%r10)++,%f12
-	fld.l	-1024(%r11)++,%f13
-	fld.l	-508(%r12)++,%f14
-	fld.l	-248(%r13)++,%f15
-	fld.l	-4(%r14)++,%f16
-
-	# Index form, no auto-increment.
-	fld.l	%r5(%r0),%f0
-	fld.l	%r6(%r1),%f31
-	fld.l	%r7(%r2),%f30
-	fld.l	%r8(%r3),%f29
-	fld.l	%r9(%r4),%f28
-	fld.l	%r0(%r5),%f27
-	fld.l	%r1(%r6),%f26
-	fld.l	%r12(%r7),%f25
-	fld.l	%r13(%r8),%f24
-	fld.l	%r14(%r9),%f23
-	fld.l	%r15(%r10),%f22
-	fld.l	%r16(%r11),%f21
-	fld.l	%r17(%r12),%f20
-	fld.l	%r28(%r13),%f19
-	fld.l	%r31(%r14),%f18
-
-	# Index form, with auto-increment.
-	fld.l	%r5(%r0)++,%f0
-	fld.l	%r6(%r1)++,%f1
-	fld.l	%r7(%r2)++,%f2
-	fld.l	%r8(%r3)++,%f3
-	fld.l	%r9(%r4)++,%f4
-	fld.l	%r0(%r5)++,%f5
-	fld.l	%r1(%r6)++,%f6
-	fld.l	%r12(%r7)++,%f7
-	fld.l	%r13(%r8)++,%f8
-	fld.l	%r14(%r9)++,%f9
-	fld.l	%r15(%r10)++,%f10
-	fld.l	%r16(%r11)++,%f11
-	fld.l	%r17(%r12)++,%f12
-	fld.l	%r28(%r13)++,%f13
-	fld.l	%r31(%r14)++,%f14
-
diff --git a/gas/testsuite/gas/i860/fldst02.d b/gas/testsuite/gas/i860/fldst02.d
deleted file mode 100644
index 7a0db94..0000000
--- a/gas/testsuite/gas/i860/fldst02.d
+++ /dev/null
@@ -1,73 +0,0 @@
-#as:
-#objdump: -dr
-#name: i860 fldst02 (fld.d)
-
-.*: +file format .*
-
-Disassembly of section \.text:
-
-00000000 <\.text>:
-   0:	00 00 00 24 	fld.d	0\(%r0\),%f0
-   4:	80 00 3e 24 	fld.d	128\(%r1\),%f30
-   8:	00 01 5c 24 	fld.d	256\(%sp\),%f28
-   c:	00 02 7a 24 	fld.d	512\(%fp\),%f26
-  10:	00 04 98 24 	fld.d	1024\(%r4\),%f24
-  14:	00 10 b6 24 	fld.d	4096\(%r5\),%f22
-  18:	00 20 d4 24 	fld.d	8192\(%r6\),%f20
-  1c:	00 40 f2 24 	fld.d	16384\(%r7\),%f18
-  20:	f8 7f f0 24 	fld.d	32760\(%r7\),%f16
-  24:	00 80 ee 24 	fld.d	-32768\(%r7\),%f14
-  28:	00 c0 0c 25 	fld.d	-16384\(%r8\),%f12
-  2c:	00 e0 2a 25 	fld.d	-8192\(%r9\),%f10
-  30:	00 f0 48 25 	fld.d	-4096\(%r10\),%f8
-  34:	00 fc 66 25 	fld.d	-1024\(%r11\),%f6
-  38:	00 fe 84 25 	fld.d	-512\(%r12\),%f4
-  3c:	08 ff a2 25 	fld.d	-248\(%r13\),%f2
-  40:	f8 ff c0 25 	fld.d	-8\(%r14\),%f0
-  44:	01 00 00 24 	fld.d	0\(%r0\)\+\+,%f0
-  48:	81 00 22 24 	fld.d	128\(%r1\)\+\+,%f2
-  4c:	01 01 44 24 	fld.d	256\(%sp\)\+\+,%f4
-  50:	01 02 66 24 	fld.d	512\(%fp\)\+\+,%f6
-  54:	01 04 88 24 	fld.d	1024\(%r4\)\+\+,%f8
-  58:	01 10 aa 24 	fld.d	4096\(%r5\)\+\+,%f10
-  5c:	01 20 cc 24 	fld.d	8192\(%r6\)\+\+,%f12
-  60:	01 40 ee 24 	fld.d	16384\(%r7\)\+\+,%f14
-  64:	f9 7f f0 24 	fld.d	32760\(%r7\)\+\+,%f16
-  68:	01 80 f2 24 	fld.d	-32768\(%r7\)\+\+,%f18
-  6c:	01 c0 14 25 	fld.d	-16384\(%r8\)\+\+,%f20
-  70:	01 e0 36 25 	fld.d	-8192\(%r9\)\+\+,%f22
-  74:	01 f0 58 25 	fld.d	-4096\(%r10\)\+\+,%f24
-  78:	01 fc 7a 25 	fld.d	-1024\(%r11\)\+\+,%f26
-  7c:	01 fe 9c 25 	fld.d	-512\(%r12\)\+\+,%f28
-  80:	09 ff be 25 	fld.d	-248\(%r13\)\+\+,%f30
-  84:	f9 ff d0 25 	fld.d	-8\(%r14\)\+\+,%f16
-  88:	00 28 00 20 	fld.d	%r5\(%r0\),%f0
-  8c:	00 30 3e 20 	fld.d	%r6\(%r1\),%f30
-  90:	00 38 5c 20 	fld.d	%r7\(%sp\),%f28
-  94:	00 40 7a 20 	fld.d	%r8\(%fp\),%f26
-  98:	00 48 98 20 	fld.d	%r9\(%r4\),%f24
-  9c:	00 00 b6 20 	fld.d	%r0\(%r5\),%f22
-  a0:	00 08 d4 20 	fld.d	%r1\(%r6\),%f20
-  a4:	00 60 f2 20 	fld.d	%r12\(%r7\),%f18
-  a8:	00 68 10 21 	fld.d	%r13\(%r8\),%f16
-  ac:	00 70 2e 21 	fld.d	%r14\(%r9\),%f14
-  b0:	00 78 4c 21 	fld.d	%r15\(%r10\),%f12
-  b4:	00 80 6a 21 	fld.d	%r16\(%r11\),%f10
-  b8:	00 88 88 21 	fld.d	%r17\(%r12\),%f8
-  bc:	00 e0 a6 21 	fld.d	%r28\(%r13\),%f6
-  c0:	00 f8 c4 21 	fld.d	%r31\(%r14\),%f4
-  c4:	01 28 00 20 	fld.d	%r5\(%r0\)\+\+,%f0
-  c8:	01 30 22 20 	fld.d	%r6\(%r1\)\+\+,%f2
-  cc:	01 38 44 20 	fld.d	%r7\(%sp\)\+\+,%f4
-  d0:	01 40 66 20 	fld.d	%r8\(%fp\)\+\+,%f6
-  d4:	01 48 88 20 	fld.d	%r9\(%r4\)\+\+,%f8
-  d8:	01 00 aa 20 	fld.d	%r0\(%r5\)\+\+,%f10
-  dc:	01 08 cc 20 	fld.d	%r1\(%r6\)\+\+,%f12
-  e0:	01 60 ee 20 	fld.d	%r12\(%r7\)\+\+,%f14
-  e4:	01 68 10 21 	fld.d	%r13\(%r8\)\+\+,%f16
-  e8:	01 70 32 21 	fld.d	%r14\(%r9\)\+\+,%f18
-  ec:	01 78 54 21 	fld.d	%r15\(%r10\)\+\+,%f20
-  f0:	01 80 76 21 	fld.d	%r16\(%r11\)\+\+,%f22
-  f4:	01 88 98 21 	fld.d	%r17\(%r12\)\+\+,%f24
-  f8:	01 e0 ba 21 	fld.d	%r28\(%r13\)\+\+,%f26
-  fc:	01 f8 de 21 	fld.d	%r31\(%r14\)\+\+,%f30
diff --git a/gas/testsuite/gas/i860/fldst02.s b/gas/testsuite/gas/i860/fldst02.s
deleted file mode 100644
index 50b612b..0000000
--- a/gas/testsuite/gas/i860/fldst02.s
+++ /dev/null
@@ -1,75 +0,0 @@
-# fld.d (no relocations here)
-	.text
-
-	# Immediate form, no auto-increment.
-	fld.d	0(%r0),%f0
-	fld.d	128(%r1),%f30
-	fld.d	256(%r2),%f28
-	fld.d	512(%r3),%f26
-	fld.d	1024(%r4),%f24
-	fld.d	4096(%r5),%f22
-	fld.d	8192(%r6),%f20
-	fld.d	16384(%r7),%f18
-	fld.d	32760(%r7),%f16
-	fld.d	-32768(%r7),%f14
-	fld.d	-16384(%r8),%f12
-	fld.d	-8192(%r9),%f10
-	fld.d	-4096(%r10),%f8
-	fld.d	-1024(%r11),%f6
-	fld.d	-512(%r12),%f4
-	fld.d	-248(%r13),%f2
-	fld.d	-8(%r14),%f0
-
-	# Immediate form, with auto-increment.
-	fld.d	0(%r0)++,%f0
-	fld.d	128(%r1)++,%f2
-	fld.d	256(%r2)++,%f4
-	fld.d	512(%r3)++,%f6
-	fld.d	1024(%r4)++,%f8
-	fld.d	4096(%r5)++,%f10
-	fld.d	8192(%r6)++,%f12
-	fld.d	16384(%r7)++,%f14
-	fld.d	32760(%r7)++,%f16
-	fld.d	-32768(%r7)++,%f18
-	fld.d	-16384(%r8)++,%f20
-	fld.d	-8192(%r9)++,%f22
-	fld.d	-4096(%r10)++,%f24
-	fld.d	-1024(%r11)++,%f26
-	fld.d	-512(%r12)++,%f28
-	fld.d	-248(%r13)++,%f30
-	fld.d	-8(%r14)++,%f16
-
-	# Index form, no auto-increment.
-	fld.d	%r5(%r0),%f0
-	fld.d	%r6(%r1),%f30
-	fld.d	%r7(%r2),%f28
-	fld.d	%r8(%r3),%f26
-	fld.d	%r9(%r4),%f24
-	fld.d	%r0(%r5),%f22
-	fld.d	%r1(%r6),%f20
-	fld.d	%r12(%r7),%f18
-	fld.d	%r13(%r8),%f16
-	fld.d	%r14(%r9),%f14
-	fld.d	%r15(%r10),%f12
-	fld.d	%r16(%r11),%f10
-	fld.d	%r17(%r12),%f8
-	fld.d	%r28(%r13),%f6
-	fld.d	%r31(%r14),%f4
-
-	# Index form, with auto-increment.
-	fld.d	%r5(%r0)++,%f0
-	fld.d	%r6(%r1)++,%f2
-	fld.d	%r7(%r2)++,%f4
-	fld.d	%r8(%r3)++,%f6
-	fld.d	%r9(%r4)++,%f8
-	fld.d	%r0(%r5)++,%f10
-	fld.d	%r1(%r6)++,%f12
-	fld.d	%r12(%r7)++,%f14
-	fld.d	%r13(%r8)++,%f16
-	fld.d	%r14(%r9)++,%f18
-	fld.d	%r15(%r10)++,%f20
-	fld.d	%r16(%r11)++,%f22
-	fld.d	%r17(%r12)++,%f24
-	fld.d	%r28(%r13)++,%f26
-	fld.d	%r31(%r14)++,%f30
-
diff --git a/gas/testsuite/gas/i860/fldst03.d b/gas/testsuite/gas/i860/fldst03.d
deleted file mode 100644
index 033c904..0000000
--- a/gas/testsuite/gas/i860/fldst03.d
+++ /dev/null
@@ -1,73 +0,0 @@
-#as:
-#objdump: -dr
-#name: i860 fldst03 (fld.q)
-
-.*: +file format .*
-
-Disassembly of section \.text:
-
-00000000 <\.text>:
-   0:	04 00 00 24 	fld.q	0\(%r0\),%f0
-   4:	84 00 3c 24 	fld.q	128\(%r1\),%f28
-   8:	04 01 58 24 	fld.q	256\(%sp\),%f24
-   c:	04 02 74 24 	fld.q	512\(%fp\),%f20
-  10:	04 04 90 24 	fld.q	1024\(%r4\),%f16
-  14:	04 10 ac 24 	fld.q	4096\(%r5\),%f12
-  18:	04 20 c8 24 	fld.q	8192\(%r6\),%f8
-  1c:	04 40 e4 24 	fld.q	16384\(%r7\),%f4
-  20:	f4 7f e0 24 	fld.q	32752\(%r7\),%f0
-  24:	04 80 fc 24 	fld.q	-32768\(%r7\),%f28
-  28:	04 c0 18 25 	fld.q	-16384\(%r8\),%f24
-  2c:	04 e0 34 25 	fld.q	-8192\(%r9\),%f20
-  30:	04 f0 50 25 	fld.q	-4096\(%r10\),%f16
-  34:	04 fc 6c 25 	fld.q	-1024\(%r11\),%f12
-  38:	04 fe 88 25 	fld.q	-512\(%r12\),%f8
-  3c:	04 ff a4 25 	fld.q	-256\(%r13\),%f4
-  40:	f4 ff c0 25 	fld.q	-16\(%r14\),%f0
-  44:	05 00 00 24 	fld.q	0\(%r0\)\+\+,%f0
-  48:	85 00 24 24 	fld.q	128\(%r1\)\+\+,%f4
-  4c:	05 01 48 24 	fld.q	256\(%sp\)\+\+,%f8
-  50:	05 02 6c 24 	fld.q	512\(%fp\)\+\+,%f12
-  54:	05 04 90 24 	fld.q	1024\(%r4\)\+\+,%f16
-  58:	05 10 b4 24 	fld.q	4096\(%r5\)\+\+,%f20
-  5c:	05 20 d8 24 	fld.q	8192\(%r6\)\+\+,%f24
-  60:	05 40 fc 24 	fld.q	16384\(%r7\)\+\+,%f28
-  64:	f5 7f e0 24 	fld.q	32752\(%r7\)\+\+,%f0
-  68:	05 80 e4 24 	fld.q	-32768\(%r7\)\+\+,%f4
-  6c:	05 c0 08 25 	fld.q	-16384\(%r8\)\+\+,%f8
-  70:	05 e0 2c 25 	fld.q	-8192\(%r9\)\+\+,%f12
-  74:	05 f0 50 25 	fld.q	-4096\(%r10\)\+\+,%f16
-  78:	05 fc 74 25 	fld.q	-1024\(%r11\)\+\+,%f20
-  7c:	05 fe 98 25 	fld.q	-512\(%r12\)\+\+,%f24
-  80:	05 ff bc 25 	fld.q	-256\(%r13\)\+\+,%f28
-  84:	f5 ff d0 25 	fld.q	-16\(%r14\)\+\+,%f16
-  88:	04 28 00 20 	fld.q	%r5\(%r0\),%f0
-  8c:	04 30 34 20 	fld.q	%r6\(%r1\),%f20
-  90:	04 38 50 20 	fld.q	%r7\(%sp\),%f16
-  94:	04 40 6c 20 	fld.q	%r8\(%fp\),%f12
-  98:	04 48 88 20 	fld.q	%r9\(%r4\),%f8
-  9c:	04 00 a4 20 	fld.q	%r0\(%r5\),%f4
-  a0:	04 08 c0 20 	fld.q	%r1\(%r6\),%f0
-  a4:	04 60 fc 20 	fld.q	%r12\(%r7\),%f28
-  a8:	04 68 18 21 	fld.q	%r13\(%r8\),%f24
-  ac:	04 70 34 21 	fld.q	%r14\(%r9\),%f20
-  b0:	04 78 50 21 	fld.q	%r15\(%r10\),%f16
-  b4:	04 80 6c 21 	fld.q	%r16\(%r11\),%f12
-  b8:	04 88 88 21 	fld.q	%r17\(%r12\),%f8
-  bc:	04 e0 a4 21 	fld.q	%r28\(%r13\),%f4
-  c0:	04 f8 c0 21 	fld.q	%r31\(%r14\),%f0
-  c4:	05 28 00 20 	fld.q	%r5\(%r0\)\+\+,%f0
-  c8:	05 30 24 20 	fld.q	%r6\(%r1\)\+\+,%f4
-  cc:	05 38 48 20 	fld.q	%r7\(%sp\)\+\+,%f8
-  d0:	05 40 6c 20 	fld.q	%r8\(%fp\)\+\+,%f12
-  d4:	05 48 90 20 	fld.q	%r9\(%r4\)\+\+,%f16
-  d8:	05 00 b4 20 	fld.q	%r0\(%r5\)\+\+,%f20
-  dc:	05 08 d8 20 	fld.q	%r1\(%r6\)\+\+,%f24
-  e0:	05 60 fc 20 	fld.q	%r12\(%r7\)\+\+,%f28
-  e4:	05 68 00 21 	fld.q	%r13\(%r8\)\+\+,%f0
-  e8:	05 70 24 21 	fld.q	%r14\(%r9\)\+\+,%f4
-  ec:	05 78 48 21 	fld.q	%r15\(%r10\)\+\+,%f8
-  f0:	05 80 6c 21 	fld.q	%r16\(%r11\)\+\+,%f12
-  f4:	05 88 90 21 	fld.q	%r17\(%r12\)\+\+,%f16
-  f8:	05 e0 b4 21 	fld.q	%r28\(%r13\)\+\+,%f20
-  fc:	05 f8 d8 21 	fld.q	%r31\(%r14\)\+\+,%f24
diff --git a/gas/testsuite/gas/i860/fldst03.s b/gas/testsuite/gas/i860/fldst03.s
deleted file mode 100644
index 7259925..0000000
--- a/gas/testsuite/gas/i860/fldst03.s
+++ /dev/null
@@ -1,75 +0,0 @@
-# fld.q (no relocations here)
-	.text
-
-	# Immediate form, no auto-increment.
-	fld.q	0(%r0),%f0
-	fld.q	128(%r1),%f28
-	fld.q	256(%r2),%f24
-	fld.q	512(%r3),%f20
-	fld.q	1024(%r4),%f16
-	fld.q	4096(%r5),%f12
-	fld.q	8192(%r6),%f8
-	fld.q	16384(%r7),%f4
-	fld.q	32752(%r7),%f0
-	fld.q	-32768(%r7),%f28
-	fld.q	-16384(%r8),%f24
-	fld.q	-8192(%r9),%f20
-	fld.q	-4096(%r10),%f16
-	fld.q	-1024(%r11),%f12
-	fld.q	-512(%r12),%f8
-	fld.q	-256(%r13),%f4
-	fld.q	-16(%r14),%f0
-
-	# Immediate form, with auto-increment.
-	fld.q	0(%r0)++,%f0
-	fld.q	128(%r1)++,%f4
-	fld.q	256(%r2)++,%f8
-	fld.q	512(%r3)++,%f12
-	fld.q	1024(%r4)++,%f16
-	fld.q	4096(%r5)++,%f20
-	fld.q	8192(%r6)++,%f24
-	fld.q	16384(%r7)++,%f28
-	fld.q	32752(%r7)++,%f0
-	fld.q	-32768(%r7)++,%f4
-	fld.q	-16384(%r8)++,%f8
-	fld.q	-8192(%r9)++,%f12
-	fld.q	-4096(%r10)++,%f16
-	fld.q	-1024(%r11)++,%f20
-	fld.q	-512(%r12)++,%f24
-	fld.q	-256(%r13)++,%f28
-	fld.q	-16(%r14)++,%f16
-
-	# Index form, no auto-increment.
-	fld.q	%r5(%r0),%f0
-	fld.q	%r6(%r1),%f20
-	fld.q	%r7(%r2),%f16
-	fld.q	%r8(%r3),%f12
-	fld.q	%r9(%r4),%f8
-	fld.q	%r0(%r5),%f4
-	fld.q	%r1(%r6),%f0
-	fld.q	%r12(%r7),%f28
-	fld.q	%r13(%r8),%f24
-	fld.q	%r14(%r9),%f20
-	fld.q	%r15(%r10),%f16
-	fld.q	%r16(%r11),%f12
-	fld.q	%r17(%r12),%f8
-	fld.q	%r28(%r13),%f4
-	fld.q	%r31(%r14),%f0
-
-	# Index form, with auto-increment.
-	fld.q	%r5(%r0)++,%f0
-	fld.q	%r6(%r1)++,%f4
-	fld.q	%r7(%r2)++,%f8
-	fld.q	%r8(%r3)++,%f12
-	fld.q	%r9(%r4)++,%f16
-	fld.q	%r0(%r5)++,%f20
-	fld.q	%r1(%r6)++,%f24
-	fld.q	%r12(%r7)++,%f28
-	fld.q	%r13(%r8)++,%f0
-	fld.q	%r14(%r9)++,%f4
-	fld.q	%r15(%r10)++,%f8
-	fld.q	%r16(%r11)++,%f12
-	fld.q	%r17(%r12)++,%f16
-	fld.q	%r28(%r13)++,%f20
-	fld.q	%r31(%r14)++,%f24
-
diff --git a/gas/testsuite/gas/i860/fldst04.d b/gas/testsuite/gas/i860/fldst04.d
deleted file mode 100644
index 32559ce..0000000
--- a/gas/testsuite/gas/i860/fldst04.d
+++ /dev/null
@@ -1,73 +0,0 @@
-#as:
-#objdump: -dr
-#name: i860 fldst04 (fst.l)
-
-.*: +file format .*
-
-Disassembly of section \.text:
-
-00000000 <\.text>:
-   0:	02 00 00 2c 	fst.l	%f0,0\(%r0\)
-   4:	7e 00 3f 2c 	fst.l	%f31,124\(%r1\)
-   8:	02 01 5e 2c 	fst.l	%f30,256\(%sp\)
-   c:	02 02 7d 2c 	fst.l	%f29,512\(%fp\)
-  10:	02 04 9c 2c 	fst.l	%f28,1024\(%r4\)
-  14:	02 10 bb 2c 	fst.l	%f27,4096\(%r5\)
-  18:	02 20 da 2c 	fst.l	%f26,8192\(%r6\)
-  1c:	02 40 f9 2c 	fst.l	%f25,16384\(%r7\)
-  20:	fe 7f f9 2c 	fst.l	%f25,32764\(%r7\)
-  24:	02 80 f7 2c 	fst.l	%f23,-32768\(%r7\)
-  28:	02 c0 02 2d 	fst.l	%f2,-16384\(%r8\)
-  2c:	02 e0 23 2d 	fst.l	%f3,-8192\(%r9\)
-  30:	02 f0 48 2d 	fst.l	%f8,-4096\(%r10\)
-  34:	02 fc 69 2d 	fst.l	%f9,-1024\(%r11\)
-  38:	06 fe 8c 2d 	fst.l	%f12,-508\(%r12\)
-  3c:	0a ff b3 2d 	fst.l	%f19,-248\(%r13\)
-  40:	fe ff d5 2d 	fst.l	%f21,-4\(%r14\)
-  44:	03 00 00 2c 	fst.l	%f0,0\(%r0\)\+\+
-  48:	7f 00 21 2c 	fst.l	%f1,124\(%r1\)\+\+
-  4c:	03 01 42 2c 	fst.l	%f2,256\(%sp\)\+\+
-  50:	03 02 63 2c 	fst.l	%f3,512\(%fp\)\+\+
-  54:	03 04 84 2c 	fst.l	%f4,1024\(%r4\)\+\+
-  58:	03 10 a5 2c 	fst.l	%f5,4096\(%r5\)\+\+
-  5c:	03 20 c6 2c 	fst.l	%f6,8192\(%r6\)\+\+
-  60:	03 40 e7 2c 	fst.l	%f7,16384\(%r7\)\+\+
-  64:	ff 7f e8 2c 	fst.l	%f8,32764\(%r7\)\+\+
-  68:	03 80 e9 2c 	fst.l	%f9,-32768\(%r7\)\+\+
-  6c:	03 c0 0a 2d 	fst.l	%f10,-16384\(%r8\)\+\+
-  70:	03 e0 2b 2d 	fst.l	%f11,-8192\(%r9\)\+\+
-  74:	03 f0 4c 2d 	fst.l	%f12,-4096\(%r10\)\+\+
-  78:	03 fc 6d 2d 	fst.l	%f13,-1024\(%r11\)\+\+
-  7c:	07 fe 8e 2d 	fst.l	%f14,-508\(%r12\)\+\+
-  80:	0b ff af 2d 	fst.l	%f15,-248\(%r13\)\+\+
-  84:	ff ff d0 2d 	fst.l	%f16,-4\(%r14\)\+\+
-  88:	02 28 00 28 	fst.l	%f0,%r5\(%r0\)
-  8c:	02 30 3f 28 	fst.l	%f31,%r6\(%r1\)
-  90:	02 38 5e 28 	fst.l	%f30,%r7\(%sp\)
-  94:	02 40 7d 28 	fst.l	%f29,%r8\(%fp\)
-  98:	02 48 9c 28 	fst.l	%f28,%r9\(%r4\)
-  9c:	02 00 bb 28 	fst.l	%f27,%r0\(%r5\)
-  a0:	02 08 da 28 	fst.l	%f26,%r1\(%r6\)
-  a4:	02 60 f9 28 	fst.l	%f25,%r12\(%r7\)
-  a8:	02 68 18 29 	fst.l	%f24,%r13\(%r8\)
-  ac:	02 70 37 29 	fst.l	%f23,%r14\(%r9\)
-  b0:	02 78 56 29 	fst.l	%f22,%r15\(%r10\)
-  b4:	02 80 75 29 	fst.l	%f21,%r16\(%r11\)
-  b8:	02 88 94 29 	fst.l	%f20,%r17\(%r12\)
-  bc:	02 e0 b3 29 	fst.l	%f19,%r28\(%r13\)
-  c0:	02 f8 d2 29 	fst.l	%f18,%r31\(%r14\)
-  c4:	03 28 00 28 	fst.l	%f0,%r5\(%r0\)\+\+
-  c8:	03 30 21 28 	fst.l	%f1,%r6\(%r1\)\+\+
-  cc:	03 38 42 28 	fst.l	%f2,%r7\(%sp\)\+\+
-  d0:	03 40 63 28 	fst.l	%f3,%r8\(%fp\)\+\+
-  d4:	03 48 84 28 	fst.l	%f4,%r9\(%r4\)\+\+
-  d8:	03 00 a5 28 	fst.l	%f5,%r0\(%r5\)\+\+
-  dc:	03 08 c6 28 	fst.l	%f6,%r1\(%r6\)\+\+
-  e0:	03 60 e7 28 	fst.l	%f7,%r12\(%r7\)\+\+
-  e4:	03 68 08 29 	fst.l	%f8,%r13\(%r8\)\+\+
-  e8:	03 70 29 29 	fst.l	%f9,%r14\(%r9\)\+\+
-  ec:	03 78 4a 29 	fst.l	%f10,%r15\(%r10\)\+\+
-  f0:	03 80 6b 29 	fst.l	%f11,%r16\(%r11\)\+\+
-  f4:	03 88 8c 29 	fst.l	%f12,%r17\(%r12\)\+\+
-  f8:	03 e0 ad 29 	fst.l	%f13,%r28\(%r13\)\+\+
-  fc:	03 f8 ce 29 	fst.l	%f14,%r31\(%r14\)\+\+
diff --git a/gas/testsuite/gas/i860/fldst04.s b/gas/testsuite/gas/i860/fldst04.s
deleted file mode 100644
index 7136614..0000000
--- a/gas/testsuite/gas/i860/fldst04.s
+++ /dev/null
@@ -1,75 +0,0 @@
-# fst.l (no relocations here)
-	.text
-
-	# Immediate form, no auto-increment.
-	fst.l	%f0,0(%r0)
-	fst.l	%f31,124(%r1)
-	fst.l	%f30,256(%r2)
-	fst.l	%f29,512(%r3)
-	fst.l	%f28,1024(%r4)
-	fst.l	%f27,4096(%r5)
-	fst.l	%f26,8192(%r6)
-	fst.l	%f25,16384(%r7)
-	fst.l	%f25,32764(%r7)
-	fst.l	%f23,-32768(%r7)
-	fst.l	%f2,-16384(%r8)
-	fst.l	%f3,-8192(%r9)
-	fst.l	%f8,-4096(%r10)
-	fst.l	%f9,-1024(%r11)
-	fst.l	%f12,-508(%r12)
-	fst.l	%f19,-248(%r13)
-	fst.l	%f21,-4(%r14)
-
-	# Immediate form, with auto-increment.
-	fst.l	%f0,0(%r0)++
-	fst.l	%f1,124(%r1)++
-	fst.l	%f2,256(%r2)++
-	fst.l	%f3,512(%r3)++
-	fst.l	%f4,1024(%r4)++
-	fst.l	%f5,4096(%r5)++
-	fst.l	%f6,8192(%r6)++
-	fst.l	%f7,16384(%r7)++
-	fst.l	%f8,32764(%r7)++
-	fst.l	%f9,-32768(%r7)++
-	fst.l	%f10,-16384(%r8)++
-	fst.l	%f11,-8192(%r9)++
-	fst.l	%f12,-4096(%r10)++
-	fst.l	%f13,-1024(%r11)++
-	fst.l	%f14,-508(%r12)++
-	fst.l	%f15,-248(%r13)++
-	fst.l	%f16,-4(%r14)++
-
-	# Index form, no auto-increment.
-	fst.l	%f0,%r5(%r0)
-	fst.l	%f31,%r6(%r1)
-	fst.l	%f30,%r7(%r2)
-	fst.l	%f29,%r8(%r3)
-	fst.l	%f28,%r9(%r4)
-	fst.l	%f27,%r0(%r5)
-	fst.l	%f26,%r1(%r6)
-	fst.l	%f25,%r12(%r7)
-	fst.l	%f24,%r13(%r8)
-	fst.l	%f23,%r14(%r9)
-	fst.l	%f22,%r15(%r10)
-	fst.l	%f21,%r16(%r11)
-	fst.l	%f20,%r17(%r12)
-	fst.l	%f19,%r28(%r13)
-	fst.l	%f18,%r31(%r14)
-
-	# Index form, with auto-increment.
-	fst.l	%f0,%r5(%r0)++
-	fst.l	%f1,%r6(%r1)++
-	fst.l	%f2,%r7(%r2)++
-	fst.l	%f3,%r8(%r3)++
-	fst.l	%f4,%r9(%r4)++
-	fst.l	%f5,%r0(%r5)++
-	fst.l	%f6,%r1(%r6)++
-	fst.l	%f7,%r12(%r7)++
-	fst.l	%f8,%r13(%r8)++
-	fst.l	%f9,%r14(%r9)++
-	fst.l	%f10,%r15(%r10)++
-	fst.l	%f11,%r16(%r11)++
-	fst.l	%f12,%r17(%r12)++
-	fst.l	%f13,%r28(%r13)++
-	fst.l	%f14,%r31(%r14)++
-
diff --git a/gas/testsuite/gas/i860/fldst05.d b/gas/testsuite/gas/i860/fldst05.d
deleted file mode 100644
index a6187bf..0000000
--- a/gas/testsuite/gas/i860/fldst05.d
+++ /dev/null
@@ -1,73 +0,0 @@
-#as:
-#objdump: -dr
-#name: i860 fldst05 (fst.d)
-
-.*: +file format .*
-
-Disassembly of section \.text:
-
-00000000 <\.text>:
-   0:	00 00 00 2c 	fst.d	%f0,0\(%r0\)
-   4:	80 00 3e 2c 	fst.d	%f30,128\(%r1\)
-   8:	00 01 5c 2c 	fst.d	%f28,256\(%sp\)
-   c:	00 02 7a 2c 	fst.d	%f26,512\(%fp\)
-  10:	00 04 98 2c 	fst.d	%f24,1024\(%r4\)
-  14:	00 10 b6 2c 	fst.d	%f22,4096\(%r5\)
-  18:	00 20 d4 2c 	fst.d	%f20,8192\(%r6\)
-  1c:	00 40 f2 2c 	fst.d	%f18,16384\(%r7\)
-  20:	f8 7f f0 2c 	fst.d	%f16,32760\(%r7\)
-  24:	00 80 ee 2c 	fst.d	%f14,-32768\(%r7\)
-  28:	00 c0 0c 2d 	fst.d	%f12,-16384\(%r8\)
-  2c:	00 e0 2a 2d 	fst.d	%f10,-8192\(%r9\)
-  30:	00 f0 48 2d 	fst.d	%f8,-4096\(%r10\)
-  34:	00 fc 66 2d 	fst.d	%f6,-1024\(%r11\)
-  38:	00 fe 84 2d 	fst.d	%f4,-512\(%r12\)
-  3c:	08 ff a2 2d 	fst.d	%f2,-248\(%r13\)
-  40:	f8 ff c0 2d 	fst.d	%f0,-8\(%r14\)
-  44:	01 00 00 2c 	fst.d	%f0,0\(%r0\)\+\+
-  48:	81 00 22 2c 	fst.d	%f2,128\(%r1\)\+\+
-  4c:	01 01 44 2c 	fst.d	%f4,256\(%sp\)\+\+
-  50:	01 02 66 2c 	fst.d	%f6,512\(%fp\)\+\+
-  54:	01 04 88 2c 	fst.d	%f8,1024\(%r4\)\+\+
-  58:	01 10 aa 2c 	fst.d	%f10,4096\(%r5\)\+\+
-  5c:	01 20 cc 2c 	fst.d	%f12,8192\(%r6\)\+\+
-  60:	01 40 ee 2c 	fst.d	%f14,16384\(%r7\)\+\+
-  64:	f9 7f f0 2c 	fst.d	%f16,32760\(%r7\)\+\+
-  68:	01 80 f2 2c 	fst.d	%f18,-32768\(%r7\)\+\+
-  6c:	01 c0 14 2d 	fst.d	%f20,-16384\(%r8\)\+\+
-  70:	01 e0 36 2d 	fst.d	%f22,-8192\(%r9\)\+\+
-  74:	01 f0 58 2d 	fst.d	%f24,-4096\(%r10\)\+\+
-  78:	01 fc 7a 2d 	fst.d	%f26,-1024\(%r11\)\+\+
-  7c:	01 fe 9c 2d 	fst.d	%f28,-512\(%r12\)\+\+
-  80:	09 ff be 2d 	fst.d	%f30,-248\(%r13\)\+\+
-  84:	f9 ff d0 2d 	fst.d	%f16,-8\(%r14\)\+\+
-  88:	00 28 00 28 	fst.d	%f0,%r5\(%r0\)
-  8c:	00 30 3e 28 	fst.d	%f30,%r6\(%r1\)
-  90:	00 38 5c 28 	fst.d	%f28,%r7\(%sp\)
-  94:	00 40 7a 28 	fst.d	%f26,%r8\(%fp\)
-  98:	00 48 98 28 	fst.d	%f24,%r9\(%r4\)
-  9c:	00 00 b6 28 	fst.d	%f22,%r0\(%r5\)
-  a0:	00 08 d4 28 	fst.d	%f20,%r1\(%r6\)
-  a4:	00 60 f2 28 	fst.d	%f18,%r12\(%r7\)
-  a8:	00 68 10 29 	fst.d	%f16,%r13\(%r8\)
-  ac:	00 70 2e 29 	fst.d	%f14,%r14\(%r9\)
-  b0:	00 78 4c 29 	fst.d	%f12,%r15\(%r10\)
-  b4:	00 80 6a 29 	fst.d	%f10,%r16\(%r11\)
-  b8:	00 88 88 29 	fst.d	%f8,%r17\(%r12\)
-  bc:	00 e0 a6 29 	fst.d	%f6,%r28\(%r13\)
-  c0:	00 f8 c4 29 	fst.d	%f4,%r31\(%r14\)
-  c4:	01 28 00 28 	fst.d	%f0,%r5\(%r0\)\+\+
-  c8:	01 30 22 28 	fst.d	%f2,%r6\(%r1\)\+\+
-  cc:	01 38 44 28 	fst.d	%f4,%r7\(%sp\)\+\+
-  d0:	01 40 66 28 	fst.d	%f6,%r8\(%fp\)\+\+
-  d4:	01 48 88 28 	fst.d	%f8,%r9\(%r4\)\+\+
-  d8:	01 00 aa 28 	fst.d	%f10,%r0\(%r5\)\+\+
-  dc:	01 08 cc 28 	fst.d	%f12,%r1\(%r6\)\+\+
-  e0:	01 60 ee 28 	fst.d	%f14,%r12\(%r7\)\+\+
-  e4:	01 68 10 29 	fst.d	%f16,%r13\(%r8\)\+\+
-  e8:	01 70 32 29 	fst.d	%f18,%r14\(%r9\)\+\+
-  ec:	01 78 54 29 	fst.d	%f20,%r15\(%r10\)\+\+
-  f0:	01 80 76 29 	fst.d	%f22,%r16\(%r11\)\+\+
-  f4:	01 88 98 29 	fst.d	%f24,%r17\(%r12\)\+\+
-  f8:	01 e0 ba 29 	fst.d	%f26,%r28\(%r13\)\+\+
-  fc:	01 f8 de 29 	fst.d	%f30,%r31\(%r14\)\+\+
diff --git a/gas/testsuite/gas/i860/fldst05.s b/gas/testsuite/gas/i860/fldst05.s
deleted file mode 100644
index 97032aa..0000000
--- a/gas/testsuite/gas/i860/fldst05.s
+++ /dev/null
@@ -1,75 +0,0 @@
-# fst.d (no relocations here)
-	.text
-
-	# Immediate form, no auto-increment.
-	fst.d	%f0,0(%r0)
-	fst.d	%f30,128(%r1)
-	fst.d	%f28,256(%r2)
-	fst.d	%f26,512(%r3)
-	fst.d	%f24,1024(%r4)
-	fst.d	%f22,4096(%r5)
-	fst.d	%f20,8192(%r6)
-	fst.d	%f18,16384(%r7)
-	fst.d	%f16,32760(%r7)
-	fst.d	%f14,-32768(%r7)
-	fst.d	%f12,-16384(%r8)
-	fst.d	%f10,-8192(%r9)
-	fst.d	%f8,-4096(%r10)
-	fst.d	%f6,-1024(%r11)
-	fst.d	%f4,-512(%r12)
-	fst.d	%f2,-248(%r13)
-	fst.d	%f0,-8(%r14)
-
-	# Immediate form, with auto-increment.
-	fst.d	%f0,0(%r0)++
-	fst.d	%f2,128(%r1)++
-	fst.d	%f4,256(%r2)++
-	fst.d	%f6,512(%r3)++
-	fst.d	%f8,1024(%r4)++
-	fst.d	%f10,4096(%r5)++
-	fst.d	%f12,8192(%r6)++
-	fst.d	%f14,16384(%r7)++
-	fst.d	%f16,32760(%r7)++
-	fst.d	%f18,-32768(%r7)++
-	fst.d	%f20,-16384(%r8)++
-	fst.d	%f22,-8192(%r9)++
-	fst.d	%f24,-4096(%r10)++
-	fst.d	%f26,-1024(%r11)++
-	fst.d	%f28,-512(%r12)++
-	fst.d	%f30,-248(%r13)++
-	fst.d	%f16,-8(%r14)++
-
-	# Index form, no auto-increment.
-	fst.d	%f0,%r5(%r0)
-	fst.d	%f30,%r6(%r1)
-	fst.d	%f28,%r7(%r2)
-	fst.d	%f26,%r8(%r3)
-	fst.d	%f24,%r9(%r4)
-	fst.d	%f22,%r0(%r5)
-	fst.d	%f20,%r1(%r6)
-	fst.d	%f18,%r12(%r7)
-	fst.d	%f16,%r13(%r8)
-	fst.d	%f14,%r14(%r9)
-	fst.d	%f12,%r15(%r10)
-	fst.d	%f10,%r16(%r11)
-	fst.d	%f8,%r17(%r12)
-	fst.d	%f6,%r28(%r13)
-	fst.d	%f4,%r31(%r14)
-
-	# Index form, with auto-increment.
-	fst.d	%f0,%r5(%r0)++
-	fst.d	%f2,%r6(%r1)++
-	fst.d	%f4,%r7(%r2)++
-	fst.d	%f6,%r8(%r3)++
-	fst.d	%f8,%r9(%r4)++
-	fst.d	%f10,%r0(%r5)++
-	fst.d	%f12,%r1(%r6)++
-	fst.d	%f14,%r12(%r7)++
-	fst.d	%f16,%r13(%r8)++
-	fst.d	%f18,%r14(%r9)++
-	fst.d	%f20,%r15(%r10)++
-	fst.d	%f22,%r16(%r11)++
-	fst.d	%f24,%r17(%r12)++
-	fst.d	%f26,%r28(%r13)++
-	fst.d	%f30,%r31(%r14)++
-
diff --git a/gas/testsuite/gas/i860/fldst06.d b/gas/testsuite/gas/i860/fldst06.d
deleted file mode 100644
index a1f6c5c..0000000
--- a/gas/testsuite/gas/i860/fldst06.d
+++ /dev/null
@@ -1,73 +0,0 @@
-#as:
-#objdump: -dr
-#name: i860 fldst06 (fst.q)
-
-.*: +file format .*
-
-Disassembly of section \.text:
-
-00000000 <\.text>:
-   0:	04 00 00 2c 	fst.q	%f0,0\(%r0\)
-   4:	84 00 3c 2c 	fst.q	%f28,128\(%r1\)
-   8:	04 01 58 2c 	fst.q	%f24,256\(%sp\)
-   c:	04 02 74 2c 	fst.q	%f20,512\(%fp\)
-  10:	04 04 90 2c 	fst.q	%f16,1024\(%r4\)
-  14:	04 10 ac 2c 	fst.q	%f12,4096\(%r5\)
-  18:	04 20 c8 2c 	fst.q	%f8,8192\(%r6\)
-  1c:	04 40 e4 2c 	fst.q	%f4,16384\(%r7\)
-  20:	f4 7f e0 2c 	fst.q	%f0,32752\(%r7\)
-  24:	04 80 fc 2c 	fst.q	%f28,-32768\(%r7\)
-  28:	04 c0 18 2d 	fst.q	%f24,-16384\(%r8\)
-  2c:	04 e0 34 2d 	fst.q	%f20,-8192\(%r9\)
-  30:	04 f0 50 2d 	fst.q	%f16,-4096\(%r10\)
-  34:	04 fc 6c 2d 	fst.q	%f12,-1024\(%r11\)
-  38:	04 fe 88 2d 	fst.q	%f8,-512\(%r12\)
-  3c:	04 ff a4 2d 	fst.q	%f4,-256\(%r13\)
-  40:	f4 ff c0 2d 	fst.q	%f0,-16\(%r14\)
-  44:	05 00 00 2c 	fst.q	%f0,0\(%r0\)\+\+
-  48:	85 00 24 2c 	fst.q	%f4,128\(%r1\)\+\+
-  4c:	05 01 48 2c 	fst.q	%f8,256\(%sp\)\+\+
-  50:	05 02 6c 2c 	fst.q	%f12,512\(%fp\)\+\+
-  54:	05 04 90 2c 	fst.q	%f16,1024\(%r4\)\+\+
-  58:	05 10 b4 2c 	fst.q	%f20,4096\(%r5\)\+\+
-  5c:	05 20 d8 2c 	fst.q	%f24,8192\(%r6\)\+\+
-  60:	05 40 fc 2c 	fst.q	%f28,16384\(%r7\)\+\+
-  64:	f5 7f e0 2c 	fst.q	%f0,32752\(%r7\)\+\+
-  68:	05 80 e4 2c 	fst.q	%f4,-32768\(%r7\)\+\+
-  6c:	05 c0 08 2d 	fst.q	%f8,-16384\(%r8\)\+\+
-  70:	05 e0 2c 2d 	fst.q	%f12,-8192\(%r9\)\+\+
-  74:	05 f0 50 2d 	fst.q	%f16,-4096\(%r10\)\+\+
-  78:	05 fc 74 2d 	fst.q	%f20,-1024\(%r11\)\+\+
-  7c:	05 fe 98 2d 	fst.q	%f24,-512\(%r12\)\+\+
-  80:	05 ff bc 2d 	fst.q	%f28,-256\(%r13\)\+\+
-  84:	f5 ff d0 2d 	fst.q	%f16,-16\(%r14\)\+\+
-  88:	04 28 00 28 	fst.q	%f0,%r5\(%r0\)
-  8c:	04 30 34 28 	fst.q	%f20,%r6\(%r1\)
-  90:	04 38 50 28 	fst.q	%f16,%r7\(%sp\)
-  94:	04 40 6c 28 	fst.q	%f12,%r8\(%fp\)
-  98:	04 48 88 28 	fst.q	%f8,%r9\(%r4\)
-  9c:	04 00 a4 28 	fst.q	%f4,%r0\(%r5\)
-  a0:	04 08 c0 28 	fst.q	%f0,%r1\(%r6\)
-  a4:	04 60 fc 28 	fst.q	%f28,%r12\(%r7\)
-  a8:	04 68 18 29 	fst.q	%f24,%r13\(%r8\)
-  ac:	04 70 34 29 	fst.q	%f20,%r14\(%r9\)
-  b0:	04 78 50 29 	fst.q	%f16,%r15\(%r10\)
-  b4:	04 80 6c 29 	fst.q	%f12,%r16\(%r11\)
-  b8:	04 88 88 29 	fst.q	%f8,%r17\(%r12\)
-  bc:	04 e0 a4 29 	fst.q	%f4,%r28\(%r13\)
-  c0:	04 f8 c0 29 	fst.q	%f0,%r31\(%r14\)
-  c4:	05 28 00 28 	fst.q	%f0,%r5\(%r0\)\+\+
-  c8:	05 30 24 28 	fst.q	%f4,%r6\(%r1\)\+\+
-  cc:	05 38 48 28 	fst.q	%f8,%r7\(%sp\)\+\+
-  d0:	05 40 6c 28 	fst.q	%f12,%r8\(%fp\)\+\+
-  d4:	05 48 90 28 	fst.q	%f16,%r9\(%r4\)\+\+
-  d8:	05 00 b4 28 	fst.q	%f20,%r0\(%r5\)\+\+
-  dc:	05 08 d8 28 	fst.q	%f24,%r1\(%r6\)\+\+
-  e0:	05 60 fc 28 	fst.q	%f28,%r12\(%r7\)\+\+
-  e4:	05 68 00 29 	fst.q	%f0,%r13\(%r8\)\+\+
-  e8:	05 70 24 29 	fst.q	%f4,%r14\(%r9\)\+\+
-  ec:	05 78 48 29 	fst.q	%f8,%r15\(%r10\)\+\+
-  f0:	05 80 6c 29 	fst.q	%f12,%r16\(%r11\)\+\+
-  f4:	05 88 90 29 	fst.q	%f16,%r17\(%r12\)\+\+
-  f8:	05 e0 b4 29 	fst.q	%f20,%r28\(%r13\)\+\+
-  fc:	05 f8 d8 29 	fst.q	%f24,%r31\(%r14\)\+\+
diff --git a/gas/testsuite/gas/i860/fldst06.s b/gas/testsuite/gas/i860/fldst06.s
deleted file mode 100644
index 0bb1476..0000000
--- a/gas/testsuite/gas/i860/fldst06.s
+++ /dev/null
@@ -1,75 +0,0 @@
-# fst.q (no relocations here)
-	.text
-
-	# Immediate form, no auto-increment.
-	fst.q	%f0,0(%r0)
-	fst.q	%f28,128(%r1)
-	fst.q	%f24,256(%r2)
-	fst.q	%f20,512(%r3)
-	fst.q	%f16,1024(%r4)
-	fst.q	%f12,4096(%r5)
-	fst.q	%f8,8192(%r6)
-	fst.q	%f4,16384(%r7)
-	fst.q	%f0,32752(%r7)
-	fst.q	%f28,-32768(%r7)
-	fst.q	%f24,-16384(%r8)
-	fst.q	%f20,-8192(%r9)
-	fst.q	%f16,-4096(%r10)
-	fst.q	%f12,-1024(%r11)
-	fst.q	%f8,-512(%r12)
-	fst.q	%f4,-256(%r13)
-	fst.q	%f0,-16(%r14)
-
-	# Immediate form, with auto-increment.
-	fst.q	%f0,0(%r0)++
-	fst.q	%f4,128(%r1)++
-	fst.q	%f8,256(%r2)++
-	fst.q	%f12,512(%r3)++
-	fst.q	%f16,1024(%r4)++
-	fst.q	%f20,4096(%r5)++
-	fst.q	%f24,8192(%r6)++
-	fst.q	%f28,16384(%r7)++
-	fst.q	%f0,32752(%r7)++
-	fst.q	%f4,-32768(%r7)++
-	fst.q	%f8,-16384(%r8)++
-	fst.q	%f12,-8192(%r9)++
-	fst.q	%f16,-4096(%r10)++
-	fst.q	%f20,-1024(%r11)++
-	fst.q	%f24,-512(%r12)++
-	fst.q	%f28,-256(%r13)++
-	fst.q	%f16,-16(%r14)++
-
-	# Index form, no auto-increment.
-	fst.q	%f0,%r5(%r0)
-	fst.q	%f20,%r6(%r1)
-	fst.q	%f16,%r7(%r2)
-	fst.q	%f12,%r8(%r3)
-	fst.q	%f8,%r9(%r4)
-	fst.q	%f4,%r0(%r5)
-	fst.q	%f0,%r1(%r6)
-	fst.q	%f28,%r12(%r7)
-	fst.q	%f24,%r13(%r8)
-	fst.q	%f20,%r14(%r9)
-	fst.q	%f16,%r15(%r10)
-	fst.q	%f12,%r16(%r11)
-	fst.q	%f8,%r17(%r12)
-	fst.q	%f4,%r28(%r13)
-	fst.q	%f0,%r31(%r14)
-
-	# Index form, with auto-increment.
-	fst.q	%f0,%r5(%r0)++
-	fst.q	%f4,%r6(%r1)++
-	fst.q	%f8,%r7(%r2)++
-	fst.q	%f12,%r8(%r3)++
-	fst.q	%f16,%r9(%r4)++
-	fst.q	%f20,%r0(%r5)++
-	fst.q	%f24,%r1(%r6)++
-	fst.q	%f28,%r12(%r7)++
-	fst.q	%f0,%r13(%r8)++
-	fst.q	%f4,%r14(%r9)++
-	fst.q	%f8,%r15(%r10)++
-	fst.q	%f12,%r16(%r11)++
-	fst.q	%f16,%r17(%r12)++
-	fst.q	%f20,%r28(%r13)++
-	fst.q	%f24,%r31(%r14)++
-
diff --git a/gas/testsuite/gas/i860/fldst07.d b/gas/testsuite/gas/i860/fldst07.d
deleted file mode 100644
index 4ba66f9..0000000
--- a/gas/testsuite/gas/i860/fldst07.d
+++ /dev/null
@@ -1,73 +0,0 @@
-#as:
-#objdump: -dr
-#name: i860 fldst07 (pfld.l)
-
-.*: +file format .*
-
-Disassembly of section \.text:
-
-00000000 <\.text>:
-   0:	02 00 00 64 	pfld.l	0\(%r0\),%f0
-   4:	7e 00 3f 64 	pfld.l	124\(%r1\),%f31
-   8:	02 01 5e 64 	pfld.l	256\(%sp\),%f30
-   c:	02 02 7d 64 	pfld.l	512\(%fp\),%f29
-  10:	02 04 9c 64 	pfld.l	1024\(%r4\),%f28
-  14:	02 10 bb 64 	pfld.l	4096\(%r5\),%f27
-  18:	02 20 da 64 	pfld.l	8192\(%r6\),%f26
-  1c:	02 40 f9 64 	pfld.l	16384\(%r7\),%f25
-  20:	fe 7f f9 64 	pfld.l	32764\(%r7\),%f25
-  24:	02 80 f7 64 	pfld.l	-32768\(%r7\),%f23
-  28:	02 c0 02 65 	pfld.l	-16384\(%r8\),%f2
-  2c:	02 e0 23 65 	pfld.l	-8192\(%r9\),%f3
-  30:	02 f0 48 65 	pfld.l	-4096\(%r10\),%f8
-  34:	02 fc 69 65 	pfld.l	-1024\(%r11\),%f9
-  38:	06 fe 8c 65 	pfld.l	-508\(%r12\),%f12
-  3c:	0a ff b3 65 	pfld.l	-248\(%r13\),%f19
-  40:	fe ff d5 65 	pfld.l	-4\(%r14\),%f21
-  44:	03 00 00 64 	pfld.l	0\(%r0\)\+\+,%f0
-  48:	7f 00 21 64 	pfld.l	124\(%r1\)\+\+,%f1
-  4c:	03 01 42 64 	pfld.l	256\(%sp\)\+\+,%f2
-  50:	03 02 63 64 	pfld.l	512\(%fp\)\+\+,%f3
-  54:	03 04 84 64 	pfld.l	1024\(%r4\)\+\+,%f4
-  58:	03 10 a5 64 	pfld.l	4096\(%r5\)\+\+,%f5
-  5c:	03 20 c6 64 	pfld.l	8192\(%r6\)\+\+,%f6
-  60:	03 40 e7 64 	pfld.l	16384\(%r7\)\+\+,%f7
-  64:	ff 7f e8 64 	pfld.l	32764\(%r7\)\+\+,%f8
-  68:	03 80 e9 64 	pfld.l	-32768\(%r7\)\+\+,%f9
-  6c:	03 c0 0a 65 	pfld.l	-16384\(%r8\)\+\+,%f10
-  70:	03 e0 2b 65 	pfld.l	-8192\(%r9\)\+\+,%f11
-  74:	03 f0 4c 65 	pfld.l	-4096\(%r10\)\+\+,%f12
-  78:	03 fc 6d 65 	pfld.l	-1024\(%r11\)\+\+,%f13
-  7c:	07 fe 8e 65 	pfld.l	-508\(%r12\)\+\+,%f14
-  80:	0b ff af 65 	pfld.l	-248\(%r13\)\+\+,%f15
-  84:	ff ff d0 65 	pfld.l	-4\(%r14\)\+\+,%f16
-  88:	02 28 00 60 	pfld.l	%r5\(%r0\),%f0
-  8c:	02 30 3f 60 	pfld.l	%r6\(%r1\),%f31
-  90:	02 38 5e 60 	pfld.l	%r7\(%sp\),%f30
-  94:	02 40 7d 60 	pfld.l	%r8\(%fp\),%f29
-  98:	02 48 9c 60 	pfld.l	%r9\(%r4\),%f28
-  9c:	02 00 bb 60 	pfld.l	%r0\(%r5\),%f27
-  a0:	02 08 da 60 	pfld.l	%r1\(%r6\),%f26
-  a4:	02 60 f9 60 	pfld.l	%r12\(%r7\),%f25
-  a8:	02 68 18 61 	pfld.l	%r13\(%r8\),%f24
-  ac:	02 70 37 61 	pfld.l	%r14\(%r9\),%f23
-  b0:	02 78 56 61 	pfld.l	%r15\(%r10\),%f22
-  b4:	02 80 75 61 	pfld.l	%r16\(%r11\),%f21
-  b8:	02 88 94 61 	pfld.l	%r17\(%r12\),%f20
-  bc:	02 e0 b3 61 	pfld.l	%r28\(%r13\),%f19
-  c0:	02 f8 d2 61 	pfld.l	%r31\(%r14\),%f18
-  c4:	03 28 00 60 	pfld.l	%r5\(%r0\)\+\+,%f0
-  c8:	03 30 21 60 	pfld.l	%r6\(%r1\)\+\+,%f1
-  cc:	03 38 42 60 	pfld.l	%r7\(%sp\)\+\+,%f2
-  d0:	03 40 63 60 	pfld.l	%r8\(%fp\)\+\+,%f3
-  d4:	03 48 84 60 	pfld.l	%r9\(%r4\)\+\+,%f4
-  d8:	03 00 a5 60 	pfld.l	%r0\(%r5\)\+\+,%f5
-  dc:	03 08 c6 60 	pfld.l	%r1\(%r6\)\+\+,%f6
-  e0:	03 60 e7 60 	pfld.l	%r12\(%r7\)\+\+,%f7
-  e4:	03 68 08 61 	pfld.l	%r13\(%r8\)\+\+,%f8
-  e8:	03 70 29 61 	pfld.l	%r14\(%r9\)\+\+,%f9
-  ec:	03 78 4a 61 	pfld.l	%r15\(%r10\)\+\+,%f10
-  f0:	03 80 6b 61 	pfld.l	%r16\(%r11\)\+\+,%f11
-  f4:	03 88 8c 61 	pfld.l	%r17\(%r12\)\+\+,%f12
-  f8:	03 e0 ad 61 	pfld.l	%r28\(%r13\)\+\+,%f13
-  fc:	03 f8 ce 61 	pfld.l	%r31\(%r14\)\+\+,%f14
diff --git a/gas/testsuite/gas/i860/fldst07.s b/gas/testsuite/gas/i860/fldst07.s
deleted file mode 100644
index 410b256..0000000
--- a/gas/testsuite/gas/i860/fldst07.s
+++ /dev/null
@@ -1,75 +0,0 @@
-# pfld.l (no relocations here)
-	.text
-
-	# Immediate form, no auto-increment.
-	pfld.l	0(%r0),%f0
-	pfld.l	124(%r1),%f31
-	pfld.l	256(%r2),%f30
-	pfld.l	512(%r3),%f29
-	pfld.l	1024(%r4),%f28
-	pfld.l	4096(%r5),%f27
-	pfld.l	8192(%r6),%f26
-	pfld.l	16384(%r7),%f25
-	pfld.l	32764(%r7),%f25
-	pfld.l	-32768(%r7),%f23
-	pfld.l	-16384(%r8),%f2
-	pfld.l	-8192(%r9),%f3
-	pfld.l	-4096(%r10),%f8
-	pfld.l	-1024(%r11),%f9
-	pfld.l	-508(%r12),%f12
-	pfld.l	-248(%r13),%f19
-	pfld.l	-4(%r14),%f21
-
-	# Immediate form, with auto-increment.
-	pfld.l	0(%r0)++,%f0
-	pfld.l	124(%r1)++,%f1
-	pfld.l	256(%r2)++,%f2
-	pfld.l	512(%r3)++,%f3
-	pfld.l	1024(%r4)++,%f4
-	pfld.l	4096(%r5)++,%f5
-	pfld.l	8192(%r6)++,%f6
-	pfld.l	16384(%r7)++,%f7
-	pfld.l	32764(%r7)++,%f8
-	pfld.l	-32768(%r7)++,%f9
-	pfld.l	-16384(%r8)++,%f10
-	pfld.l	-8192(%r9)++,%f11
-	pfld.l	-4096(%r10)++,%f12
-	pfld.l	-1024(%r11)++,%f13
-	pfld.l	-508(%r12)++,%f14
-	pfld.l	-248(%r13)++,%f15
-	pfld.l	-4(%r14)++,%f16
-
-	# Index form, no auto-increment.
-	pfld.l	%r5(%r0),%f0
-	pfld.l	%r6(%r1),%f31
-	pfld.l	%r7(%r2),%f30
-	pfld.l	%r8(%r3),%f29
-	pfld.l	%r9(%r4),%f28
-	pfld.l	%r0(%r5),%f27
-	pfld.l	%r1(%r6),%f26
-	pfld.l	%r12(%r7),%f25
-	pfld.l	%r13(%r8),%f24
-	pfld.l	%r14(%r9),%f23
-	pfld.l	%r15(%r10),%f22
-	pfld.l	%r16(%r11),%f21
-	pfld.l	%r17(%r12),%f20
-	pfld.l	%r28(%r13),%f19
-	pfld.l	%r31(%r14),%f18
-
-	# Index form, with auto-increment.
-	pfld.l	%r5(%r0)++,%f0
-	pfld.l	%r6(%r1)++,%f1
-	pfld.l	%r7(%r2)++,%f2
-	pfld.l	%r8(%r3)++,%f3
-	pfld.l	%r9(%r4)++,%f4
-	pfld.l	%r0(%r5)++,%f5
-	pfld.l	%r1(%r6)++,%f6
-	pfld.l	%r12(%r7)++,%f7
-	pfld.l	%r13(%r8)++,%f8
-	pfld.l	%r14(%r9)++,%f9
-	pfld.l	%r15(%r10)++,%f10
-	pfld.l	%r16(%r11)++,%f11
-	pfld.l	%r17(%r12)++,%f12
-	pfld.l	%r28(%r13)++,%f13
-	pfld.l	%r31(%r14)++,%f14
-
diff --git a/gas/testsuite/gas/i860/fldst08.d b/gas/testsuite/gas/i860/fldst08.d
deleted file mode 100644
index 272b40d..0000000
--- a/gas/testsuite/gas/i860/fldst08.d
+++ /dev/null
@@ -1,73 +0,0 @@
-#as:
-#objdump: -dr
-#name: i860 fldst08 (pfld.d)
-
-.*: +file format .*
-
-Disassembly of section \.text:
-
-00000000 <\.text>:
-   0:	00 00 00 64 	pfld.d	0\(%r0\),%f0
-   4:	80 00 3e 64 	pfld.d	128\(%r1\),%f30
-   8:	00 01 5c 64 	pfld.d	256\(%sp\),%f28
-   c:	00 02 7a 64 	pfld.d	512\(%fp\),%f26
-  10:	00 04 98 64 	pfld.d	1024\(%r4\),%f24
-  14:	00 10 b6 64 	pfld.d	4096\(%r5\),%f22
-  18:	00 20 d4 64 	pfld.d	8192\(%r6\),%f20
-  1c:	00 40 f2 64 	pfld.d	16384\(%r7\),%f18
-  20:	f8 7f f0 64 	pfld.d	32760\(%r7\),%f16
-  24:	00 80 ee 64 	pfld.d	-32768\(%r7\),%f14
-  28:	00 c0 0c 65 	pfld.d	-16384\(%r8\),%f12
-  2c:	00 e0 2a 65 	pfld.d	-8192\(%r9\),%f10
-  30:	00 f0 48 65 	pfld.d	-4096\(%r10\),%f8
-  34:	00 fc 66 65 	pfld.d	-1024\(%r11\),%f6
-  38:	00 fe 84 65 	pfld.d	-512\(%r12\),%f4
-  3c:	08 ff a2 65 	pfld.d	-248\(%r13\),%f2
-  40:	f8 ff c0 65 	pfld.d	-8\(%r14\),%f0
-  44:	01 00 00 64 	pfld.d	0\(%r0\)\+\+,%f0
-  48:	81 00 22 64 	pfld.d	128\(%r1\)\+\+,%f2
-  4c:	01 01 44 64 	pfld.d	256\(%sp\)\+\+,%f4
-  50:	01 02 66 64 	pfld.d	512\(%fp\)\+\+,%f6
-  54:	01 04 88 64 	pfld.d	1024\(%r4\)\+\+,%f8
-  58:	01 10 aa 64 	pfld.d	4096\(%r5\)\+\+,%f10
-  5c:	01 20 cc 64 	pfld.d	8192\(%r6\)\+\+,%f12
-  60:	01 40 ee 64 	pfld.d	16384\(%r7\)\+\+,%f14
-  64:	f9 7f f0 64 	pfld.d	32760\(%r7\)\+\+,%f16
-  68:	01 80 f2 64 	pfld.d	-32768\(%r7\)\+\+,%f18
-  6c:	01 c0 14 65 	pfld.d	-16384\(%r8\)\+\+,%f20
-  70:	01 e0 36 65 	pfld.d	-8192\(%r9\)\+\+,%f22
-  74:	01 f0 58 65 	pfld.d	-4096\(%r10\)\+\+,%f24
-  78:	01 fc 7a 65 	pfld.d	-1024\(%r11\)\+\+,%f26
-  7c:	01 fe 9c 65 	pfld.d	-512\(%r12\)\+\+,%f28
-  80:	09 ff be 65 	pfld.d	-248\(%r13\)\+\+,%f30
-  84:	f9 ff d0 65 	pfld.d	-8\(%r14\)\+\+,%f16
-  88:	00 28 00 60 	pfld.d	%r5\(%r0\),%f0
-  8c:	00 30 3e 60 	pfld.d	%r6\(%r1\),%f30
-  90:	00 38 5c 60 	pfld.d	%r7\(%sp\),%f28
-  94:	00 40 7a 60 	pfld.d	%r8\(%fp\),%f26
-  98:	00 48 98 60 	pfld.d	%r9\(%r4\),%f24
-  9c:	00 00 b6 60 	pfld.d	%r0\(%r5\),%f22
-  a0:	00 08 d4 60 	pfld.d	%r1\(%r6\),%f20
-  a4:	00 60 f2 60 	pfld.d	%r12\(%r7\),%f18
-  a8:	00 68 10 61 	pfld.d	%r13\(%r8\),%f16
-  ac:	00 70 2e 61 	pfld.d	%r14\(%r9\),%f14
-  b0:	00 78 4c 61 	pfld.d	%r15\(%r10\),%f12
-  b4:	00 80 6a 61 	pfld.d	%r16\(%r11\),%f10
-  b8:	00 88 88 61 	pfld.d	%r17\(%r12\),%f8
-  bc:	00 e0 a6 61 	pfld.d	%r28\(%r13\),%f6
-  c0:	00 f8 c4 61 	pfld.d	%r31\(%r14\),%f4
-  c4:	01 28 00 60 	pfld.d	%r5\(%r0\)\+\+,%f0
-  c8:	01 30 22 60 	pfld.d	%r6\(%r1\)\+\+,%f2
-  cc:	01 38 44 60 	pfld.d	%r7\(%sp\)\+\+,%f4
-  d0:	01 40 66 60 	pfld.d	%r8\(%fp\)\+\+,%f6
-  d4:	01 48 88 60 	pfld.d	%r9\(%r4\)\+\+,%f8
-  d8:	01 00 aa 60 	pfld.d	%r0\(%r5\)\+\+,%f10
-  dc:	01 08 cc 60 	pfld.d	%r1\(%r6\)\+\+,%f12
-  e0:	01 60 ee 60 	pfld.d	%r12\(%r7\)\+\+,%f14
-  e4:	01 68 10 61 	pfld.d	%r13\(%r8\)\+\+,%f16
-  e8:	01 70 32 61 	pfld.d	%r14\(%r9\)\+\+,%f18
-  ec:	01 78 54 61 	pfld.d	%r15\(%r10\)\+\+,%f20
-  f0:	01 80 76 61 	pfld.d	%r16\(%r11\)\+\+,%f22
-  f4:	01 88 98 61 	pfld.d	%r17\(%r12\)\+\+,%f24
-  f8:	01 e0 ba 61 	pfld.d	%r28\(%r13\)\+\+,%f26
-  fc:	01 f8 de 61 	pfld.d	%r31\(%r14\)\+\+,%f30
diff --git a/gas/testsuite/gas/i860/fldst08.s b/gas/testsuite/gas/i860/fldst08.s
deleted file mode 100644
index 7ae6cf5..0000000
--- a/gas/testsuite/gas/i860/fldst08.s
+++ /dev/null
@@ -1,75 +0,0 @@
-# pfld.d (no relocations here)
-	.text
-
-	# Immediate form, no auto-increment.
-	pfld.d	0(%r0),%f0
-	pfld.d	128(%r1),%f30
-	pfld.d	256(%r2),%f28
-	pfld.d	512(%r3),%f26
-	pfld.d	1024(%r4),%f24
-	pfld.d	4096(%r5),%f22
-	pfld.d	8192(%r6),%f20
-	pfld.d	16384(%r7),%f18
-	pfld.d	32760(%r7),%f16
-	pfld.d	-32768(%r7),%f14
-	pfld.d	-16384(%r8),%f12
-	pfld.d	-8192(%r9),%f10
-	pfld.d	-4096(%r10),%f8
-	pfld.d	-1024(%r11),%f6
-	pfld.d	-512(%r12),%f4
-	pfld.d	-248(%r13),%f2
-	pfld.d	-8(%r14),%f0
-
-	# Immediate form, with auto-increment.
-	pfld.d	0(%r0)++,%f0
-	pfld.d	128(%r1)++,%f2
-	pfld.d	256(%r2)++,%f4
-	pfld.d	512(%r3)++,%f6
-	pfld.d	1024(%r4)++,%f8
-	pfld.d	4096(%r5)++,%f10
-	pfld.d	8192(%r6)++,%f12
-	pfld.d	16384(%r7)++,%f14
-	pfld.d	32760(%r7)++,%f16
-	pfld.d	-32768(%r7)++,%f18
-	pfld.d	-16384(%r8)++,%f20
-	pfld.d	-8192(%r9)++,%f22
-	pfld.d	-4096(%r10)++,%f24
-	pfld.d	-1024(%r11)++,%f26
-	pfld.d	-512(%r12)++,%f28
-	pfld.d	-248(%r13)++,%f30
-	pfld.d	-8(%r14)++,%f16
-
-	# Index form, no auto-increment.
-	pfld.d	%r5(%r0),%f0
-	pfld.d	%r6(%r1),%f30
-	pfld.d	%r7(%r2),%f28
-	pfld.d	%r8(%r3),%f26
-	pfld.d	%r9(%r4),%f24
-	pfld.d	%r0(%r5),%f22
-	pfld.d	%r1(%r6),%f20
-	pfld.d	%r12(%r7),%f18
-	pfld.d	%r13(%r8),%f16
-	pfld.d	%r14(%r9),%f14
-	pfld.d	%r15(%r10),%f12
-	pfld.d	%r16(%r11),%f10
-	pfld.d	%r17(%r12),%f8
-	pfld.d	%r28(%r13),%f6
-	pfld.d	%r31(%r14),%f4
-
-	# Index form, with auto-increment.
-	pfld.d	%r5(%r0)++,%f0
-	pfld.d	%r6(%r1)++,%f2
-	pfld.d	%r7(%r2)++,%f4
-	pfld.d	%r8(%r3)++,%f6
-	pfld.d	%r9(%r4)++,%f8
-	pfld.d	%r0(%r5)++,%f10
-	pfld.d	%r1(%r6)++,%f12
-	pfld.d	%r12(%r7)++,%f14
-	pfld.d	%r13(%r8)++,%f16
-	pfld.d	%r14(%r9)++,%f18
-	pfld.d	%r15(%r10)++,%f20
-	pfld.d	%r16(%r11)++,%f22
-	pfld.d	%r17(%r12)++,%f24
-	pfld.d	%r28(%r13)++,%f26
-	pfld.d	%r31(%r14)++,%f30
-
diff --git a/gas/testsuite/gas/i860/float01.d b/gas/testsuite/gas/i860/float01.d
deleted file mode 100644
index f614f1a..0000000
--- a/gas/testsuite/gas/i860/float01.d
+++ /dev/null
@@ -1,69 +0,0 @@
-#as:
-#objdump: -dr
-#name: i860 float01
-
-.*: +file format .*
-
-Disassembly of section \.text:
-
-00000000 <\.text>:
-   0:	30 00 22 48 	fadd.ss	%f0,%f1,%f2
-   4:	b0 10 64 48 	fadd.sd	%f2,%f3,%f4
-   8:	b0 31 0a 49 	fadd.dd	%f6,%f8,%f10
-   c:	31 28 c7 48 	fsub.ss	%f5,%f6,%f7
-  10:	b1 40 2a 49 	fsub.sd	%f8,%f9,%f10
-  14:	b1 61 d0 49 	fsub.dd	%f12,%f14,%f16
-  18:	20 58 8d 49 	fmul.ss	%f11,%f12,%f13
-  1c:	a0 70 f0 49 	fmul.sd	%f14,%f15,%f16
-  20:	a0 91 96 4a 	fmul.dd	%f18,%f20,%f22
-  24:	a1 b1 1a 4b 	fmlow.dd	%f22,%f24,%f26
-  28:	30 74 f0 49 	pfadd.ss	%f14,%f15,%f16
-  2c:	b0 8c 54 4a 	pfadd.sd	%f17,%f18,%f20
-  30:	b0 b5 1a 4b 	pfadd.dd	%f22,%f24,%f26
-  34:	31 a4 b6 4a 	pfsub.ss	%f20,%f21,%f22
-  38:	b1 bc 1a 4b 	pfsub.sd	%f23,%f24,%f26
-  3c:	b1 e5 c2 4b 	pfsub.dd	%f28,%f30,%f2
-  40:	20 dc 9d 4b 	pfmul.ss	%f27,%f28,%f29
-  44:	a0 f4 e4 4b 	pfmul.sd	%f30,%f31,%f4
-  48:	a0 35 08 48 	pfmul.dd	%f6,%f0,%f8
-  4c:	a4 15 9e 48 	pfmul3.dd	%f2,%f4,%f30
-  50:	30 02 22 48 	d.fadd.ss	%f0,%f1,%f2
-  54:	00 00 00 a0 	shl	%r0,%r0,%r0
-  58:	b0 12 64 48 	d.fadd.sd	%f2,%f3,%f4
-  5c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  60:	b0 33 0a 49 	d.fadd.dd	%f6,%f8,%f10
-  64:	00 00 00 a0 	shl	%r0,%r0,%r0
-  68:	31 2a c7 48 	d.fsub.ss	%f5,%f6,%f7
-  6c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  70:	b1 42 2a 49 	d.fsub.sd	%f8,%f9,%f10
-  74:	00 00 00 a0 	shl	%r0,%r0,%r0
-  78:	b1 63 d0 49 	d.fsub.dd	%f12,%f14,%f16
-  7c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  80:	20 5a 8d 49 	d.fmul.ss	%f11,%f12,%f13
-  84:	00 00 00 a0 	shl	%r0,%r0,%r0
-  88:	a0 72 f0 49 	d.fmul.sd	%f14,%f15,%f16
-  8c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  90:	a0 93 96 4a 	d.fmul.dd	%f18,%f20,%f22
-  94:	00 00 00 a0 	shl	%r0,%r0,%r0
-  98:	a1 43 4c 49 	d.fmlow.dd	%f8,%f10,%f12
-  9c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  a0:	30 76 f0 49 	d.pfadd.ss	%f14,%f15,%f16
-  a4:	00 00 00 a0 	shl	%r0,%r0,%r0
-  a8:	b0 8e 54 4a 	d.pfadd.sd	%f17,%f18,%f20
-  ac:	00 00 00 a0 	shl	%r0,%r0,%r0
-  b0:	b0 b7 1a 4b 	d.pfadd.dd	%f22,%f24,%f26
-  b4:	00 00 00 a0 	shl	%r0,%r0,%r0
-  b8:	31 a6 b6 4a 	d.pfsub.ss	%f20,%f21,%f22
-  bc:	00 00 00 a0 	shl	%r0,%r0,%r0
-  c0:	b1 be 1a 4b 	d.pfsub.sd	%f23,%f24,%f26
-  c4:	00 00 00 a0 	shl	%r0,%r0,%r0
-  c8:	b1 e7 c2 4b 	d.pfsub.dd	%f28,%f30,%f2
-  cc:	00 00 00 a0 	shl	%r0,%r0,%r0
-  d0:	20 de 9d 4b 	d.pfmul.ss	%f27,%f28,%f29
-  d4:	00 00 00 a0 	shl	%r0,%r0,%r0
-  d8:	a0 f6 e4 4b 	d.pfmul.sd	%f30,%f31,%f4
-  dc:	00 00 00 a0 	shl	%r0,%r0,%r0
-  e0:	a0 37 08 48 	d.pfmul.dd	%f6,%f0,%f8
-  e4:	00 00 00 a0 	shl	%r0,%r0,%r0
-  e8:	a4 17 9e 48 	d.pfmul3.dd	%f2,%f4,%f30
-  ec:	00 00 00 a0 	shl	%r0,%r0,%r0
diff --git a/gas/testsuite/gas/i860/float01.s b/gas/testsuite/gas/i860/float01.s
deleted file mode 100644
index 88e3769..0000000
--- a/gas/testsuite/gas/i860/float01.s
+++ /dev/null
@@ -1,84 +0,0 @@
-# fadd, fsub, fmul, pfmul3, fmlow
-
-	.text
-
-	# Non-pipelined, without dual bit 
-	fadd.ss	%f0,%f1,%f2
-	fadd.sd	%f2,%f3,%f4
-	fadd.dd	%f6,%f8,%f10
-
-	fsub.ss	%f5,%f6,%f7
-	fsub.sd	%f8,%f9,%f10
-	fsub.dd	%f12,%f14,%f16
-
-	fmul.ss	%f11,%f12,%f13
-	fmul.sd	%f14,%f15,%f16
-	fmul.dd	%f18,%f20,%f22
-
-	fmlow.dd	%f22,%f24,%f26
-
-	# Pipelined, without dual bit 
-	pfadd.ss	%f14,%f15,%f16
-	pfadd.sd	%f17,%f18,%f20
-	pfadd.dd	%f22,%f24,%f26
-
-	pfsub.ss	%f20,%f21,%f22
-	pfsub.sd	%f23,%f24,%f26
-	pfsub.dd	%f28,%f30,%f2
-
-	pfmul.ss	%f27,%f28,%f29
-	pfmul.sd	%f30,%f31,%f4
-	pfmul.dd	%f6,%f0,%f8
-
-	pfmul3.dd	%f2,%f4,%f30
-
-	# Non-pipelined, with dual bit 
-	d.fadd.ss	%f0,%f1,%f2
-	nop
-	d.fadd.sd	%f2,%f3,%f4
-	nop
-	d.fadd.dd	%f6,%f8,%f10
-	nop
-
-	d.fsub.ss	%f5,%f6,%f7
-	nop
-	d.fsub.sd	%f8,%f9,%f10
-	nop
-	d.fsub.dd	%f12,%f14,%f16
-	nop
-
-	d.fmul.ss	%f11,%f12,%f13
-	nop
-	d.fmul.sd	%f14,%f15,%f16
-	nop
-	d.fmul.dd	%f18,%f20,%f22
-	nop
-
-	d.fmlow.dd	%f8,%f10,%f12
-	nop
-
-	# Pipelined, with dual bit 
-	d.pfadd.ss	%f14,%f15,%f16
-	nop
-	d.pfadd.sd	%f17,%f18,%f20
-	nop
-	d.pfadd.dd	%f22,%f24,%f26
-	nop
-
-	d.pfsub.ss	%f20,%f21,%f22
-	nop
-	d.pfsub.sd	%f23,%f24,%f26
-	nop
-	d.pfsub.dd	%f28,%f30,%f2
-	nop
-
-	d.pfmul.ss	%f27,%f28,%f29
-	nop
-	d.pfmul.sd	%f30,%f31,%f4
-	nop
-	d.pfmul.dd	%f6,%f0,%f8
-	nop
-
-	d.pfmul3.dd	%f2,%f4,%f30
-	nop
-
diff --git a/gas/testsuite/gas/i860/float02.d b/gas/testsuite/gas/i860/float02.d
deleted file mode 100644
index aae176f..0000000
--- a/gas/testsuite/gas/i860/float02.d
+++ /dev/null
@@ -1,39 +0,0 @@
-#as:
-#objdump: -dr
-#name: i860 float02
-
-.*: +file format .*
-
-Disassembly of section \.text:
-
-00000000 <\.text>:
-   0:	22 00 01 48 	frcp.ss	%f0,%f1
-   4:	a2 00 44 48 	frcp.sd	%f2,%f4
-   8:	a2 01 c8 48 	frcp.dd	%f6,%f8
-   c:	23 00 a6 48 	frsqr.ss	%f5,%f6
-  10:	a3 00 0a 49 	frsqr.sd	%f8,%f10
-  14:	a3 01 8e 49 	frsqr.dd	%f12,%f14
-  18:	33 08 1f 48 	famov.ss	%f1,%f31
-  1c:	33 11 1e 48 	famov.ds	%f2,%f30
-  20:	b3 38 10 48 	famov.sd	%f7,%f16
-  24:	b3 c1 0c 48 	famov.dd	%f24,%f12
-  28:	22 02 01 48 	d.frcp.ss	%f0,%f1
-  2c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  30:	a2 02 5e 48 	d.frcp.sd	%f2,%f30
-  34:	00 00 00 a0 	shl	%r0,%r0,%r0
-  38:	a2 03 c8 48 	d.frcp.dd	%f6,%f8
-  3c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  40:	23 02 a6 48 	d.frsqr.ss	%f5,%f6
-  44:	00 00 00 a0 	shl	%r0,%r0,%r0
-  48:	a3 02 18 49 	d.frsqr.sd	%f8,%f24
-  4c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  50:	a3 03 8e 49 	d.frsqr.dd	%f12,%f14
-  54:	00 00 00 a0 	shl	%r0,%r0,%r0
-  58:	33 2a 0d 48 	d.famov.ss	%f5,%f13
-  5c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  60:	33 f3 15 48 	d.famov.ds	%f30,%f21
-  64:	00 00 00 a0 	shl	%r0,%r0,%r0
-  68:	b3 ba 16 48 	d.famov.sd	%f23,%f22
-  6c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  70:	b3 03 0c 48 	d.famov.dd	%f0,%f12
-  74:	00 00 00 a0 	shl	%r0,%r0,%r0
diff --git a/gas/testsuite/gas/i860/float02.s b/gas/testsuite/gas/i860/float02.s
deleted file mode 100644
index d4a475d..0000000
--- a/gas/testsuite/gas/i860/float02.s
+++ /dev/null
@@ -1,42 +0,0 @@
-# frcp, frsqr, famov
-
-	.text
-
-	# Without dual bit 
-	frcp.ss	%f0,%f1
-	frcp.sd	%f2,%f4
-	frcp.dd	%f6,%f8
-
-	frsqr.ss	%f5,%f6
-	frsqr.sd	%f8,%f10
-	frsqr.dd	%f12,%f14
-
-	famov.ss	%f1,%f31
-	famov.ds	%f2,%f30
-	famov.sd	%f7,%f16
-	famov.dd	%f24,%f12
-
-	# With dual bit 
-	d.frcp.ss	%f0,%f1
-	nop
-	d.frcp.sd	%f2,%f30
-	nop
-	d.frcp.dd	%f6,%f8
-	nop
-
-	d.frsqr.ss	%f5,%f6
-	nop
-	d.frsqr.sd	%f8,%f24
-	nop
-	d.frsqr.dd	%f12,%f14
-	nop
-
-	d.famov.ss	%f5,%f13
-	nop
-	d.famov.ds	%f30,%f21
-	nop
-	d.famov.sd	%f23,%f22
-	nop
-	d.famov.dd	%f0,%f12
-	nop
-
diff --git a/gas/testsuite/gas/i860/float03.d b/gas/testsuite/gas/i860/float03.d
deleted file mode 100644
index 10f66c2..0000000
--- a/gas/testsuite/gas/i860/float03.d
+++ /dev/null
@@ -1,51 +0,0 @@
-#as:
-#objdump: -dr
-#name: i860 float03
-
-.*: +file format .*
-
-Disassembly of section \.text:
-
-00000000 <\.text>:
-   0:	b2 10 04 48 	fix.sd	%f2,%f4
-   4:	b2 31 08 48 	fix.dd	%f6,%f8
-   8:	ba 40 0a 48 	ftrunc.sd	%f8,%f10
-   c:	ba 61 0e 48 	ftrunc.dd	%f12,%f14
-  10:	b2 f4 0e 48 	pfix.sd	%f30,%f14
-  14:	b2 c5 02 48 	pfix.dd	%f24,%f2
-  18:	ba 44 0a 48 	pftrunc.sd	%f8,%f10
-  1c:	ba 65 0e 48 	pftrunc.dd	%f12,%f14
-  20:	34 04 22 48 	pfgt.ss	%f0,%f1,%f2
-  24:	34 35 0a 49 	pfgt.dd	%f6,%f8,%f10
-  28:	b4 2c c7 48 	pfle.ss	%f5,%f6,%f7
-  2c:	b4 65 d0 49 	pfle.dd	%f12,%f14,%f16
-  30:	35 5c 8d 49 	pfeq.ss	%f11,%f12,%f13
-  34:	35 95 96 4a 	pfeq.dd	%f18,%f20,%f22
-  38:	b2 12 1e 48 	d.fix.sd	%f2,%f30
-  3c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  40:	b2 33 08 48 	d.fix.dd	%f6,%f8
-  44:	00 00 00 a0 	shl	%r0,%r0,%r0
-  48:	ba 42 18 48 	d.ftrunc.sd	%f8,%f24
-  4c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  50:	ba 63 0e 48 	d.ftrunc.dd	%f12,%f14
-  54:	00 00 00 a0 	shl	%r0,%r0,%r0
-  58:	b2 16 1e 48 	d.pfix.sd	%f2,%f30
-  5c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  60:	b2 37 08 48 	d.pfix.dd	%f6,%f8
-  64:	00 00 00 a0 	shl	%r0,%r0,%r0
-  68:	ba 46 18 48 	d.pftrunc.sd	%f8,%f24
-  6c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  70:	ba 67 0e 48 	d.pftrunc.dd	%f12,%f14
-  74:	00 00 00 a0 	shl	%r0,%r0,%r0
-  78:	34 06 22 48 	d.pfgt.ss	%f0,%f1,%f2
-  7c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  80:	34 37 0a 49 	d.pfgt.dd	%f6,%f8,%f10
-  84:	00 00 00 a0 	shl	%r0,%r0,%r0
-  88:	b4 2e c7 48 	d.pfle.ss	%f5,%f6,%f7
-  8c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  90:	b4 67 d0 49 	d.pfle.dd	%f12,%f14,%f16
-  94:	00 00 00 a0 	shl	%r0,%r0,%r0
-  98:	35 5e 8d 49 	d.pfeq.ss	%f11,%f12,%f13
-  9c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  a0:	35 97 96 4a 	d.pfeq.dd	%f18,%f20,%f22
-  a4:	00 00 00 a0 	shl	%r0,%r0,%r0
diff --git a/gas/testsuite/gas/i860/float03.s b/gas/testsuite/gas/i860/float03.s
deleted file mode 100644
index 8fd626c..0000000
--- a/gas/testsuite/gas/i860/float03.s
+++ /dev/null
@@ -1,64 +0,0 @@
-# fix, ftrunc, pfgt, pfle, pfeq
-
-	.text
-
-	# Non-pipelined, without dual bit 
-	fix.sd	%f2,%f4
-	fix.dd	%f6,%f8
-
-	ftrunc.sd	%f8,%f10
-	ftrunc.dd	%f12,%f14
-
-	# Pipelined, without dual bit 
-	pfix.sd	%f30,%f14
-	pfix.dd	%f24,%f2
-
-	pftrunc.sd	%f8,%f10
-	pftrunc.dd	%f12,%f14
-
-	pfgt.ss %f0,%f1,%f2
-	pfgt.dd %f6,%f8,%f10
-
-	pfle.ss %f5,%f6,%f7
-	pfle.dd %f12,%f14,%f16
-
-	pfeq.ss %f11,%f12,%f13
-	pfeq.dd %f18,%f20,%f22
-
-	# Non-pipelined, with dual bit 
-	d.fix.sd	%f2,%f30
-	nop
-	d.fix.dd	%f6,%f8
-	nop
-
-	d.ftrunc.sd	%f8,%f24
-	nop
-	d.ftrunc.dd	%f12,%f14
-	nop
-
-	# Pipelined, with dual bit 
-	d.pfix.sd	%f2,%f30
-	nop
-	d.pfix.dd	%f6,%f8
-	nop
-
-	d.pftrunc.sd	%f8,%f24
-	nop
-	d.pftrunc.dd	%f12,%f14
-	nop
-
-	d.pfgt.ss %f0,%f1,%f2
-	nop
-	d.pfgt.dd %f6,%f8,%f10
-	nop
-
-	d.pfle.ss %f5,%f6,%f7
-	nop
-	d.pfle.dd %f12,%f14,%f16
-	nop
-
-	d.pfeq.ss %f11,%f12,%f13
-	nop
-	d.pfeq.dd %f18,%f20,%f22
-	nop
-
diff --git a/gas/testsuite/gas/i860/float04.d b/gas/testsuite/gas/i860/float04.d
deleted file mode 100644
index 8640682..0000000
--- a/gas/testsuite/gas/i860/float04.d
+++ /dev/null
@@ -1,39 +0,0 @@
-#as:
-#objdump: -dr
-#name: i860 float04
-
-.*: +file format .*
-
-Disassembly of section \.text:
-
-00000000 <\.text>:
-   0:	40 08 03 48 	fxfr	%f1,%fp
-   4:	40 40 1e 48 	fxfr	%f8,%r30
-   8:	40 f8 12 48 	fxfr	%f31,%r18
-   c:	00 48 1f 08 	ixfr	%r9,%f31
-  10:	00 b8 10 08 	ixfr	%r23,%f16
-  14:	00 00 00 08 	ixfr	%r0,%f0
-  18:	49 00 22 48 	fiadd.ss	%f0,%f1,%f2
-  1c:	c9 31 0a 49 	fiadd.dd	%f6,%f8,%f10
-  20:	4d 28 c7 48 	fisub.ss	%f5,%f6,%f7
-  24:	cd 61 d0 49 	fisub.dd	%f12,%f14,%f16
-  28:	49 74 f0 49 	pfiadd.ss	%f14,%f15,%f16
-  2c:	c9 b5 1a 4b 	pfiadd.dd	%f22,%f24,%f26
-  30:	4d a4 b6 4a 	pfisub.ss	%f20,%f21,%f22
-  34:	cd e5 c2 4b 	pfisub.dd	%f28,%f30,%f2
-  38:	49 02 22 48 	d.fiadd.ss	%f0,%f1,%f2
-  3c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  40:	c9 33 0a 49 	d.fiadd.dd	%f6,%f8,%f10
-  44:	00 00 00 a0 	shl	%r0,%r0,%r0
-  48:	4d 2a c7 48 	d.fisub.ss	%f5,%f6,%f7
-  4c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  50:	cd 63 d0 49 	d.fisub.dd	%f12,%f14,%f16
-  54:	00 00 00 a0 	shl	%r0,%r0,%r0
-  58:	49 76 f0 49 	d.pfiadd.ss	%f14,%f15,%f16
-  5c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  60:	c9 b7 1a 4b 	d.pfiadd.dd	%f22,%f24,%f26
-  64:	00 00 00 a0 	shl	%r0,%r0,%r0
-  68:	4d a6 b6 4a 	d.pfisub.ss	%f20,%f21,%f22
-  6c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  70:	cd e7 c2 4b 	d.pfisub.dd	%f28,%f30,%f2
-  74:	00 00 00 a0 	shl	%r0,%r0,%r0
diff --git a/gas/testsuite/gas/i860/float04.s b/gas/testsuite/gas/i860/float04.s
deleted file mode 100644
index 5a4aae5..0000000
--- a/gas/testsuite/gas/i860/float04.s
+++ /dev/null
@@ -1,49 +0,0 @@
-# fxfr, ixfr, fiadd, fisub
-
-	.text
-
-	# ixfr, fxfr
-	fxfr	%f1,%r3
-	fxfr	%f8,%r30
-	fxfr	%f31,%r18
-
-	ixfr	%r9,%f31
-	ixfr	%r23,%f16
-	ixfr	%r0,%f0
-
-	# Non-pipelined, without dual bit 
-	fiadd.ss	%f0,%f1,%f2
-	fiadd.dd	%f6,%f8,%f10
-
-	fisub.ss	%f5,%f6,%f7
-	fisub.dd	%f12,%f14,%f16
-
-	# Pipelined, without dual bit 
-	pfiadd.ss	%f14,%f15,%f16
-	pfiadd.dd	%f22,%f24,%f26
-
-	pfisub.ss	%f20,%f21,%f22
-	pfisub.dd	%f28,%f30,%f2
-
-	# Non-pipelined, with dual bit 
-	d.fiadd.ss	%f0,%f1,%f2
-	nop
-	d.fiadd.dd	%f6,%f8,%f10
-	nop
-
-	d.fisub.ss	%f5,%f6,%f7
-	nop
-	d.fisub.dd	%f12,%f14,%f16
-	nop
-
-	# Pipelined, with dual bit 
-	d.pfiadd.ss	%f14,%f15,%f16
-	nop
-	d.pfiadd.dd	%f22,%f24,%f26
-	nop
-
-	d.pfisub.ss	%f20,%f21,%f22
-	nop
-	d.pfisub.dd	%f28,%f30,%f2
-	nop
-
diff --git a/gas/testsuite/gas/i860/form.d b/gas/testsuite/gas/i860/form.d
deleted file mode 100644
index d713d8c..0000000
--- a/gas/testsuite/gas/i860/form.d
+++ /dev/null
@@ -1,63 +0,0 @@
-#as:
-#objdump: -dr
-#name: i860 form/pform
-
-.*: +file format .*
-
-Disassembly of section \.text:
-
-00000000 <\.text>:
-   0:	da 05 02 48 	pform	%f0,%f2
-   4:	da 15 04 48 	pform	%f2,%f4
-   8:	da 25 06 48 	pform	%f4,%f6
-   c:	da 45 0a 48 	pform	%f8,%f10
-  10:	da 65 0e 48 	pform	%f12,%f14
-  14:	da 85 12 48 	pform	%f16,%f18
-  18:	da a5 16 48 	pform	%f20,%f22
-  1c:	da c5 1a 48 	pform	%f24,%f26
-  20:	da e5 1e 48 	pform	%f28,%f30
-  24:	da 01 02 48 	form	%f0,%f2
-  28:	da 11 04 48 	form	%f2,%f4
-  2c:	da 21 06 48 	form	%f4,%f6
-  30:	da 41 0a 48 	form	%f8,%f10
-  34:	da 61 0e 48 	form	%f12,%f14
-  38:	da 81 12 48 	form	%f16,%f18
-  3c:	da a1 16 48 	form	%f20,%f22
-  40:	da c1 1a 48 	form	%f24,%f26
-  44:	da e1 1e 48 	form	%f28,%f30
-  48:	da 07 02 48 	d.pform	%f0,%f2
-  4c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  50:	da 17 04 48 	d.pform	%f2,%f4
-  54:	00 00 00 a0 	shl	%r0,%r0,%r0
-  58:	da 27 06 48 	d.pform	%f4,%f6
-  5c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  60:	da 47 0a 48 	d.pform	%f8,%f10
-  64:	00 00 00 a0 	shl	%r0,%r0,%r0
-  68:	da 67 0e 48 	d.pform	%f12,%f14
-  6c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  70:	da 87 12 48 	d.pform	%f16,%f18
-  74:	00 00 00 a0 	shl	%r0,%r0,%r0
-  78:	da a7 16 48 	d.pform	%f20,%f22
-  7c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  80:	da c7 1a 48 	d.pform	%f24,%f26
-  84:	00 00 00 a0 	shl	%r0,%r0,%r0
-  88:	da e7 1e 48 	d.pform	%f28,%f30
-  8c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  90:	da 03 02 48 	d.form	%f0,%f2
-  94:	00 00 00 a0 	shl	%r0,%r0,%r0
-  98:	da 13 04 48 	d.form	%f2,%f4
-  9c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  a0:	da 23 06 48 	d.form	%f4,%f6
-  a4:	00 00 00 a0 	shl	%r0,%r0,%r0
-  a8:	da 43 0a 48 	d.form	%f8,%f10
-  ac:	00 00 00 a0 	shl	%r0,%r0,%r0
-  b0:	da 63 0e 48 	d.form	%f12,%f14
-  b4:	00 00 00 a0 	shl	%r0,%r0,%r0
-  b8:	da 83 12 48 	d.form	%f16,%f18
-  bc:	00 00 00 a0 	shl	%r0,%r0,%r0
-  c0:	da a3 16 48 	d.form	%f20,%f22
-  c4:	00 00 00 a0 	shl	%r0,%r0,%r0
-  c8:	da c3 1a 48 	d.form	%f24,%f26
-  cc:	00 00 00 a0 	shl	%r0,%r0,%r0
-  d0:	da e3 1e 48 	d.form	%f28,%f30
-  d4:	00 00 00 a0 	shl	%r0,%r0,%r0
diff --git a/gas/testsuite/gas/i860/form.s b/gas/testsuite/gas/i860/form.s
deleted file mode 100644
index e73dde6..0000000
--- a/gas/testsuite/gas/i860/form.s
+++ /dev/null
@@ -1,66 +0,0 @@
-# form and pform
-
-	.text
-
-	# pform, no dual bit
-	pform	%f0,%f2
-	pform	%f2,%f4
-	pform	%f4,%f6
-	pform	%f8,%f10
-	pform	%f12,%f14
-	pform	%f16,%f18
-	pform	%f20,%f22
-	pform	%f24,%f26
-	pform	%f28,%f30
-
-	# form, no dual bit
-	form	%f0,%f2
-	form	%f2,%f4
-	form	%f4,%f6
-	form	%f8,%f10
-	form	%f12,%f14
-	form	%f16,%f18
-	form	%f20,%f22
-	form	%f24,%f26
-	form	%f28,%f30
-
-	# pform, with dual bit
-	d.pform	%f0,%f2
-	nop
-	d.pform	%f2,%f4
-	nop
-	d.pform	%f4,%f6
-	nop
-	d.pform	%f8,%f10
-	nop
-	d.pform	%f12,%f14
-	nop
-	d.pform	%f16,%f18
-	nop
-	d.pform	%f20,%f22
-	nop
-	d.pform	%f24,%f26
-	nop
-	d.pform	%f28,%f30
-	nop
-
-	# form, with dual bit
-	d.form	%f0,%f2
-	nop
-	d.form	%f2,%f4
-	nop
-	d.form	%f4,%f6
-	nop
-	d.form	%f8,%f10
-	nop
-	d.form	%f12,%f14
-	nop
-	d.form	%f16,%f18
-	nop
-	d.form	%f20,%f22
-	nop
-	d.form	%f24,%f26
-	nop
-	d.form	%f28,%f30
-	nop
-
diff --git a/gas/testsuite/gas/i860/i860.exp b/gas/testsuite/gas/i860/i860.exp
deleted file mode 100644
index bac5758..0000000
--- a/gas/testsuite/gas/i860/i860.exp
+++ /dev/null
@@ -1,61 +0,0 @@
-# Copyright (C) 2012-2018 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-# 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.  
-
-# i860 assembler testsuite.
-
-if [istarget i860-*-*] {
-    run_dump_test "bitwise"
-    run_dump_test "branch"
-    run_dump_test "bte"
-    run_dump_test "dir-align01"
-    run_dump_test "dir-intel01"
-    run_dump_test "dir-intel02"
-    run_list_test "dir-intel03-err" ""
-    run_dump_test "dual01"
-    run_list_test "dual02-err" ""
-    run_dump_test "dual03"
-    run_dump_test "fldst01"
-    run_dump_test "fldst02"
-    run_dump_test "fldst03"
-    run_dump_test "fldst04"
-    run_dump_test "fldst05"
-    run_dump_test "fldst06"
-    run_dump_test "fldst07"
-    run_dump_test "fldst08"
-    run_dump_test "float01"
-    run_dump_test "float02"
-    run_dump_test "float03"
-    run_dump_test "float04"
-    run_dump_test "form"
-    run_dump_test "iarith"
-    run_dump_test "ldst01"
-    run_dump_test "ldst02"
-    run_dump_test "ldst03"
-    run_dump_test "ldst04"
-    run_dump_test "ldst05"
-    run_dump_test "ldst06"
-    run_dump_test "pfam"
-    run_dump_test "pfmam"
-    run_dump_test "pfmsm"
-    run_dump_test "pfsm"
-    run_dump_test "pseudo-ops01"
-    run_dump_test "regress01"
-    run_dump_test "shift"
-    run_dump_test "simd"
-    run_dump_test "system"
-    run_dump_test "xp"
-}
-
diff --git a/gas/testsuite/gas/i860/iarith.d b/gas/testsuite/gas/i860/iarith.d
deleted file mode 100644
index 9b2a509..0000000
--- a/gas/testsuite/gas/i860/iarith.d
+++ /dev/null
@@ -1,97 +0,0 @@
-#as:
-#objdump: -dr
-#name: i860 iarith
-
-.*: +file format .*
-
-Disassembly of section \.text:
-
-00000000 <\.text>:
-   0:	00 00 22 80 	addu	%r0,%r1,%sp
-   4:	00 18 85 80 	addu	%fp,%r4,%r5
-   8:	00 30 e8 80 	addu	%r6,%r7,%r8
-   c:	00 48 4b 81 	addu	%r9,%r10,%r11
-  10:	00 f8 ae 81 	addu	%r31,%r13,%r14
-  14:	00 78 11 82 	addu	%r15,%r16,%r17
-  18:	00 90 74 82 	addu	%r18,%r19,%r20
-  1c:	00 a8 d7 82 	addu	%r21,%r22,%r23
-  20:	00 c0 3f 83 	addu	%r24,%r25,%r31
-  24:	00 d8 9d 83 	addu	%r27,%r28,%r29
-  28:	00 f0 e0 83 	addu	%r30,%r31,%r0
-  2c:	00 00 22 90 	adds	%r0,%r1,%sp
-  30:	00 18 85 90 	adds	%fp,%r4,%r5
-  34:	00 30 e8 90 	adds	%r6,%r7,%r8
-  38:	00 48 4b 91 	adds	%r9,%r10,%r11
-  3c:	00 f8 ae 91 	adds	%r31,%r13,%r14
-  40:	00 78 11 92 	adds	%r15,%r16,%r17
-  44:	00 90 74 92 	adds	%r18,%r19,%r20
-  48:	00 a8 d7 92 	adds	%r21,%r22,%r23
-  4c:	00 c0 3f 93 	adds	%r24,%r25,%r31
-  50:	00 d8 9d 93 	adds	%r27,%r28,%r29
-  54:	00 f0 e0 93 	adds	%r30,%r31,%r0
-  58:	00 00 22 88 	subu	%r0,%r1,%sp
-  5c:	00 18 85 88 	subu	%fp,%r4,%r5
-  60:	00 30 e8 88 	subu	%r6,%r7,%r8
-  64:	00 48 4b 89 	subu	%r9,%r10,%r11
-  68:	00 f8 ae 89 	subu	%r31,%r13,%r14
-  6c:	00 78 11 8a 	subu	%r15,%r16,%r17
-  70:	00 90 74 8a 	subu	%r18,%r19,%r20
-  74:	00 a8 d7 8a 	subu	%r21,%r22,%r23
-  78:	00 c0 3f 8b 	subu	%r24,%r25,%r31
-  7c:	00 d8 9d 8b 	subu	%r27,%r28,%r29
-  80:	00 f0 e0 8b 	subu	%r30,%r31,%r0
-  84:	00 00 22 98 	subs	%r0,%r1,%sp
-  88:	00 18 85 98 	subs	%fp,%r4,%r5
-  8c:	00 30 e8 98 	subs	%r6,%r7,%r8
-  90:	00 48 4b 99 	subs	%r9,%r10,%r11
-  94:	00 f8 ae 99 	subs	%r31,%r13,%r14
-  98:	00 78 11 9a 	subs	%r15,%r16,%r17
-  9c:	00 90 74 9a 	subs	%r18,%r19,%r20
-  a0:	00 a8 d7 9a 	subs	%r21,%r22,%r23
-  a4:	00 c0 3f 9b 	subs	%r24,%r25,%r31
-  a8:	00 d8 9d 9b 	subs	%r27,%r28,%r29
-  ac:	00 f0 e0 9b 	subs	%r30,%r31,%r0
-  b0:	00 00 22 84 	addu	0,%r1,%sp
-  b4:	00 20 85 84 	addu	8192,%r4,%r5
-  b8:	f5 13 e8 84 	addu	5109,%r7,%r8
-  bc:	ff 7f 4b 85 	addu	32767,%r10,%r11
-  c0:	00 80 ae 85 	addu	-32768,%r13,%r14
-  c4:	00 e0 11 86 	addu	-8192,%r16,%r17
-  c8:	ff ff 74 86 	addu	-1,%r19,%r20
-  cc:	cd ab d7 86 	addu	-21555,%r22,%r23
-  d0:	34 12 3a 87 	addu	4660,%r25,%r26
-  d4:	00 00 9d 87 	addu	0,%r28,%r29
-  d8:	03 00 e0 87 	addu	3,%r31,%r0
-  dc:	00 00 22 94 	adds	0,%r1,%sp
-  e0:	00 20 85 94 	adds	8192,%r4,%r5
-  e4:	f5 13 e8 94 	adds	5109,%r7,%r8
-  e8:	ff 7f 4b 95 	adds	32767,%r10,%r11
-  ec:	00 80 ae 95 	adds	-32768,%r13,%r14
-  f0:	00 e0 11 96 	adds	-8192,%r16,%r17
-  f4:	ff ff 74 96 	adds	-1,%r19,%r20
-  f8:	cd ab d7 96 	adds	-21555,%r22,%r23
-  fc:	34 12 3a 97 	adds	4660,%r25,%r26
- 100:	00 00 9d 97 	adds	0,%r28,%r29
- 104:	03 00 e0 97 	adds	3,%r31,%r0
- 108:	01 00 22 8c 	subu	1,%r1,%sp
- 10c:	01 20 85 8c 	subu	8193,%r4,%r5
- 110:	f6 13 e8 8c 	subu	5110,%r7,%r8
- 114:	ff 7f 4b 8d 	subu	32767,%r10,%r11
- 118:	00 80 ae 8d 	subu	-32768,%r13,%r14
- 11c:	00 e0 11 8e 	subu	-8192,%r16,%r17
- 120:	ff ff 74 8e 	subu	-1,%r19,%r20
- 124:	cd ab d7 8e 	subu	-21555,%r22,%r23
- 128:	34 12 3a 8f 	subu	4660,%r25,%r26
- 12c:	00 00 9d 8f 	subu	0,%r28,%r29
- 130:	03 00 e0 8f 	subu	3,%r31,%r0
- 134:	01 00 22 9c 	subs	1,%r1,%sp
- 138:	01 20 85 9c 	subs	8193,%r4,%r5
- 13c:	f6 13 e8 9c 	subs	5110,%r7,%r8
- 140:	ff 7f 4b 9d 	subs	32767,%r10,%r11
- 144:	00 80 ae 9d 	subs	-32768,%r13,%r14
- 148:	00 e0 11 9e 	subs	-8192,%r16,%r17
- 14c:	ff ff 74 9e 	subs	-1,%r19,%r20
- 150:	cd ab d7 9e 	subs	-21555,%r22,%r23
- 154:	34 12 3a 9f 	subs	4660,%r25,%r26
- 158:	00 00 9d 9f 	subs	0,%r28,%r29
- 15c:	03 00 e0 9f 	subs	3,%r31,%r0
diff --git a/gas/testsuite/gas/i860/iarith.s b/gas/testsuite/gas/i860/iarith.s
deleted file mode 100644
index 98a360e..0000000
--- a/gas/testsuite/gas/i860/iarith.s
+++ /dev/null
@@ -1,102 +0,0 @@
-# addu, adds, subu, subs
-
-	.text
-
-	# Register forms
-	addu	%r0,%r1,%r2
-	addu	%r3,%r4,%r5
-	addu	%r6,%r7,%r8
-	addu	%r9,%r10,%r11
-	addu	%r31,%r13,%r14
-	addu	%r15,%r16,%r17
-	addu	%r18,%r19,%r20
-	addu	%r21,%r22,%r23
-	addu	%r24,%r25,%r31
-	addu	%r27,%r28,%r29
-	addu	%r30,%r31,%r0
-
-	adds	%r0,%r1,%r2
-	adds	%r3,%r4,%r5
-	adds	%r6,%r7,%r8
-	adds	%r9,%r10,%r11
-	adds	%r31,%r13,%r14
-	adds	%r15,%r16,%r17
-	adds	%r18,%r19,%r20
-	adds	%r21,%r22,%r23
-	adds	%r24,%r25,%r31
-	adds	%r27,%r28,%r29
-	adds	%r30,%r31,%r0
-
-	subu	%r0,%r1,%r2
-	subu	%r3,%r4,%r5
-	subu	%r6,%r7,%r8
-	subu	%r9,%r10,%r11
-	subu	%r31,%r13,%r14
-	subu	%r15,%r16,%r17
-	subu	%r18,%r19,%r20
-	subu	%r21,%r22,%r23
-	subu	%r24,%r25,%r31
-	subu	%r27,%r28,%r29
-	subu	%r30,%r31,%r0
-
-	subs	%r0,%r1,%r2
-	subs	%r3,%r4,%r5
-	subs	%r6,%r7,%r8
-	subs	%r9,%r10,%r11
-	subs	%r31,%r13,%r14
-	subs	%r15,%r16,%r17
-	subs	%r18,%r19,%r20
-	subs	%r21,%r22,%r23
-	subs	%r24,%r25,%r31
-	subs	%r27,%r28,%r29
-	subs	%r30,%r31,%r0
-
-	# Immediate forms (all)
-	addu	0,%r1,%r2
-	addu	8192,%r4,%r5
-	addu	5109,%r7,%r8
-	addu	32767,%r10,%r11
-	addu	-32768,%r13,%r14
-	addu	-8192,%r16,%r17
-	addu	-1,%r19,%r20
-	addu	-21555,%r22,%r23
-	addu	0x1234,%r25,%r26
-	addu	0x0,%r28,%r29
-	addu	0x3,%r31,%r0
-
-	adds	0,%r1,%r2
-	adds	8192,%r4,%r5
-	adds	5109,%r7,%r8
-	adds	32767,%r10,%r11
-	adds	-32768,%r13,%r14
-	adds	-8192,%r16,%r17
-	adds	-1,%r19,%r20
-	adds	-21555,%r22,%r23
-	adds	0x1234,%r25,%r26
-	adds	0x0,%r28,%r29
-	adds	0x3,%r31,%r0
-
-	subu	1,%r1,%r2
-	subu	8193,%r4,%r5
-	subu	5110,%r7,%r8
-	subu	32767,%r10,%r11
-	subu	-32768,%r13,%r14
-	subu	-8192,%r16,%r17
-	subu	-1,%r19,%r20
-	subu	-21555,%r22,%r23
-	subu	0x1234,%r25,%r26
-	subu	0x0,%r28,%r29
-	subu	0x3,%r31,%r0
-
-	subs	1,%r1,%r2
-	subs	8193,%r4,%r5
-	subs	5110,%r7,%r8
-	subs	32767,%r10,%r11
-	subs	-32768,%r13,%r14
-	subs	-8192,%r16,%r17
-	subs	-1,%r19,%r20
-	subs	-21555,%r22,%r23
-	subs	0x1234,%r25,%r26
-	subs	0x0,%r28,%r29
-	subs	0x3,%r31,%r0
-
diff --git a/gas/testsuite/gas/i860/ldst01.d b/gas/testsuite/gas/i860/ldst01.d
deleted file mode 100644
index 6c1330b..0000000
--- a/gas/testsuite/gas/i860/ldst01.d
+++ /dev/null
@@ -1,39 +0,0 @@
-#as:
-#objdump: -dr
-#name: i860 ldst01 (ld.l)
-
-.*: +file format .*
-
-Disassembly of section \.text:
-
-00000000 <\.text>:
-   0:	01 00 00 14 	ld.l	0\(%r0\),%r0
-   4:	7d 00 3f 14 	ld.l	124\(%r1\),%r31
-   8:	01 01 5e 14 	ld.l	256\(%sp\),%r30
-   c:	01 02 7d 14 	ld.l	512\(%fp\),%r29
-  10:	01 04 9c 14 	ld.l	1024\(%r4\),%r28
-  14:	01 10 bb 14 	ld.l	4096\(%r5\),%r27
-  18:	01 20 da 14 	ld.l	8192\(%r6\),%r26
-  1c:	01 40 f9 14 	ld.l	16384\(%r7\),%r25
-  20:	01 c0 18 15 	ld.l	-16384\(%r8\),%r24
-  24:	01 e0 37 15 	ld.l	-8192\(%r9\),%r23
-  28:	01 f0 56 15 	ld.l	-4096\(%r10\),%r22
-  2c:	01 fc 75 15 	ld.l	-1024\(%r11\),%r21
-  30:	05 fe 94 15 	ld.l	-508\(%r12\),%r20
-  34:	09 ff b3 15 	ld.l	-248\(%r13\),%r19
-  38:	fd ff d2 15 	ld.l	-4\(%r14\),%r18
-  3c:	01 28 00 10 	ld.l	%r5\(%r0\),%r0
-  40:	01 30 3f 10 	ld.l	%r6\(%r1\),%r31
-  44:	01 38 5e 10 	ld.l	%r7\(%sp\),%r30
-  48:	01 40 7d 10 	ld.l	%r8\(%fp\),%r29
-  4c:	01 48 9c 10 	ld.l	%r9\(%r4\),%r28
-  50:	01 00 bb 10 	ld.l	%r0\(%r5\),%r27
-  54:	01 08 da 10 	ld.l	%r1\(%r6\),%r26
-  58:	01 60 f9 10 	ld.l	%r12\(%r7\),%r25
-  5c:	01 68 18 11 	ld.l	%r13\(%r8\),%r24
-  60:	01 70 37 11 	ld.l	%r14\(%r9\),%r23
-  64:	01 78 56 11 	ld.l	%r15\(%r10\),%r22
-  68:	01 80 75 11 	ld.l	%r16\(%r11\),%r21
-  6c:	01 88 94 11 	ld.l	%r17\(%r12\),%r20
-  70:	01 e0 b3 11 	ld.l	%r28\(%r13\),%r19
-  74:	01 f8 d2 11 	ld.l	%r31\(%r14\),%r18
diff --git a/gas/testsuite/gas/i860/ldst01.s b/gas/testsuite/gas/i860/ldst01.s
deleted file mode 100644
index 498f346..0000000
--- a/gas/testsuite/gas/i860/ldst01.s
+++ /dev/null
@@ -1,35 +0,0 @@
-# ld.l (no relocations here)
-	.text
-
-	ld.l	0(%r0),%r0
-	ld.l	124(%r1),%r31
-	ld.l	256(%r2),%r30
-	ld.l	512(%r3),%r29
-	ld.l	1024(%r4),%r28
-	ld.l	4096(%r5),%r27
-	ld.l	8192(%r6),%r26
-	ld.l	16384(%r7),%r25
-	ld.l	-16384(%r8),%r24
-	ld.l	-8192(%r9),%r23
-	ld.l	-4096(%r10),%r22
-	ld.l	-1024(%r11),%r21
-	ld.l	-508(%r12),%r20
-	ld.l	-248(%r13),%r19
-	ld.l	-4(%r14),%r18
-
-	ld.l	%r5(%r0),%r0
-	ld.l	%r6(%r1),%r31
-	ld.l	%r7(%r2),%r30
-	ld.l	%r8(%r3),%r29
-	ld.l	%r9(%r4),%r28
-	ld.l	%r0(%r5),%r27
-	ld.l	%r1(%r6),%r26
-	ld.l	%r12(%r7),%r25
-	ld.l	%r13(%r8),%r24
-	ld.l	%r14(%r9),%r23
-	ld.l	%r15(%r10),%r22
-	ld.l	%r16(%r11),%r21
-	ld.l	%r17(%r12),%r20
-	ld.l	%r28(%r13),%r19
-	ld.l	%r31(%r14),%r18
-
diff --git a/gas/testsuite/gas/i860/ldst02.d b/gas/testsuite/gas/i860/ldst02.d
deleted file mode 100644
index ec03ae5..0000000
--- a/gas/testsuite/gas/i860/ldst02.d
+++ /dev/null
@@ -1,39 +0,0 @@
-#as:
-#objdump: -dr
-#name: i860 ldst02 (ld.s)
-
-.*: +file format .*
-
-Disassembly of section \.text:
-
-00000000 <\.text>:
-   0:	00 00 00 14 	ld.s	0\(%r0\),%r0
-   4:	7a 00 3f 14 	ld.s	122\(%r1\),%r31
-   8:	02 01 5e 14 	ld.s	258\(%sp\),%r30
-   c:	00 02 7d 14 	ld.s	512\(%fp\),%r29
-  10:	04 04 9c 14 	ld.s	1028\(%r4\),%r28
-  14:	fa 0f bb 14 	ld.s	4090\(%r5\),%r27
-  18:	fe 1f da 14 	ld.s	8190\(%r6\),%r26
-  1c:	00 40 f9 14 	ld.s	16384\(%r7\),%r25
-  20:	00 c0 18 15 	ld.s	-16384\(%r8\),%r24
-  24:	00 e0 37 15 	ld.s	-8192\(%r9\),%r23
-  28:	00 f0 56 15 	ld.s	-4096\(%r10\),%r22
-  2c:	00 fc 75 15 	ld.s	-1024\(%r11\),%r21
-  30:	04 fe 94 15 	ld.s	-508\(%r12\),%r20
-  34:	0e ff b3 15 	ld.s	-242\(%r13\),%r19
-  38:	fe ff d2 15 	ld.s	-2\(%r14\),%r18
-  3c:	00 28 00 10 	ld.s	%r5\(%r0\),%r0
-  40:	00 30 3f 10 	ld.s	%r6\(%r1\),%r31
-  44:	00 38 5e 10 	ld.s	%r7\(%sp\),%r30
-  48:	00 40 7d 10 	ld.s	%r8\(%fp\),%r29
-  4c:	00 48 9c 10 	ld.s	%r9\(%r4\),%r28
-  50:	00 00 bb 10 	ld.s	%r0\(%r5\),%r27
-  54:	00 08 da 10 	ld.s	%r1\(%r6\),%r26
-  58:	00 60 f9 10 	ld.s	%r12\(%r7\),%r25
-  5c:	00 68 18 11 	ld.s	%r13\(%r8\),%r24
-  60:	00 70 37 11 	ld.s	%r14\(%r9\),%r23
-  64:	00 78 56 11 	ld.s	%r15\(%r10\),%r22
-  68:	00 80 75 11 	ld.s	%r16\(%r11\),%r21
-  6c:	00 88 94 11 	ld.s	%r17\(%r12\),%r20
-  70:	00 e0 b3 11 	ld.s	%r28\(%r13\),%r19
-  74:	00 f8 d2 11 	ld.s	%r31\(%r14\),%r18
diff --git a/gas/testsuite/gas/i860/ldst02.s b/gas/testsuite/gas/i860/ldst02.s
deleted file mode 100644
index 52c0e1a..0000000
--- a/gas/testsuite/gas/i860/ldst02.s
+++ /dev/null
@@ -1,35 +0,0 @@
-# ld.s (no relocations here)
-	.text
-
-	ld.s	0(%r0),%r0
-	ld.s	122(%r1),%r31
-	ld.s	258(%r2),%r30
-	ld.s	512(%r3),%r29
-	ld.s	1028(%r4),%r28
-	ld.s	4090(%r5),%r27
-	ld.s	8190(%r6),%r26
-	ld.s	16384(%r7),%r25
-	ld.s	-16384(%r8),%r24
-	ld.s	-8192(%r9),%r23
-	ld.s	-4096(%r10),%r22
-	ld.s	-1024(%r11),%r21
-	ld.s	-508(%r12),%r20
-	ld.s	-242(%r13),%r19
-	ld.s	-2(%r14),%r18
-
-	ld.s	%r5(%r0),%r0
-	ld.s	%r6(%r1),%r31
-	ld.s	%r7(%r2),%r30
-	ld.s	%r8(%r3),%r29
-	ld.s	%r9(%r4),%r28
-	ld.s	%r0(%r5),%r27
-	ld.s	%r1(%r6),%r26
-	ld.s	%r12(%r7),%r25
-	ld.s	%r13(%r8),%r24
-	ld.s	%r14(%r9),%r23
-	ld.s	%r15(%r10),%r22
-	ld.s	%r16(%r11),%r21
-	ld.s	%r17(%r12),%r20
-	ld.s	%r28(%r13),%r19
-	ld.s	%r31(%r14),%r18
-
diff --git a/gas/testsuite/gas/i860/ldst03.d b/gas/testsuite/gas/i860/ldst03.d
deleted file mode 100644
index f3f0008..0000000
--- a/gas/testsuite/gas/i860/ldst03.d
+++ /dev/null
@@ -1,43 +0,0 @@
-#as:
-#objdump: -dr
-#name: i860 ldst03 (ld.b)
-
-.*: +file format .*
-
-Disassembly of section \.text:
-
-00000000 <\.text>:
-   0:	00 00 00 04 	ld.b	0\(%r0\),%r0
-   4:	01 00 3f 04 	ld.b	1\(%r1\),%r31
-   8:	02 00 5e 04 	ld.b	2\(%sp\),%r30
-   c:	01 02 7d 04 	ld.b	513\(%fp\),%r29
-  10:	04 04 9c 04 	ld.b	1028\(%r4\),%r28
-  14:	fa 0f bb 04 	ld.b	4090\(%r5\),%r27
-  18:	fe 1f da 04 	ld.b	8190\(%r6\),%r26
-  1c:	01 40 f9 04 	ld.b	16385\(%r7\),%r25
-  20:	07 7d f9 04 	ld.b	32007\(%r7\),%r25
-  24:	ff 7f f9 04 	ld.b	32767\(%r7\),%r25
-  28:	00 80 f9 04 	ld.b	-32768\(%r7\),%r25
-  2c:	01 80 f9 04 	ld.b	-32767\(%r7\),%r25
-  30:	01 c0 18 05 	ld.b	-16383\(%r8\),%r24
-  34:	5b e0 37 05 	ld.b	-8101\(%r9\),%r23
-  38:	05 f0 56 05 	ld.b	-4091\(%r10\),%r22
-  3c:	01 fc 75 05 	ld.b	-1023\(%r11\),%r21
-  40:	03 fe 94 05 	ld.b	-509\(%r12\),%r20
-  44:	e9 ff b3 05 	ld.b	-23\(%r13\),%r19
-  48:	ff ff d2 05 	ld.b	-1\(%r14\),%r18
-  4c:	00 28 00 00 	ld.b	%r5\(%r0\),%r0
-  50:	00 30 3f 00 	ld.b	%r6\(%r1\),%r31
-  54:	00 38 5e 00 	ld.b	%r7\(%sp\),%r30
-  58:	00 40 7d 00 	ld.b	%r8\(%fp\),%r29
-  5c:	00 48 9c 00 	ld.b	%r9\(%r4\),%r28
-  60:	00 00 bb 00 	ld.b	%r0\(%r5\),%r27
-  64:	00 08 da 00 	ld.b	%r1\(%r6\),%r26
-  68:	00 60 f9 00 	ld.b	%r12\(%r7\),%r25
-  6c:	00 68 18 01 	ld.b	%r13\(%r8\),%r24
-  70:	00 70 37 01 	ld.b	%r14\(%r9\),%r23
-  74:	00 78 56 01 	ld.b	%r15\(%r10\),%r22
-  78:	00 80 75 01 	ld.b	%r16\(%r11\),%r21
-  7c:	00 88 94 01 	ld.b	%r17\(%r12\),%r20
-  80:	00 e0 b3 01 	ld.b	%r28\(%r13\),%r19
-  84:	00 f8 d2 01 	ld.b	%r31\(%r14\),%r18
diff --git a/gas/testsuite/gas/i860/ldst03.s b/gas/testsuite/gas/i860/ldst03.s
deleted file mode 100644
index 055a3b8..0000000
--- a/gas/testsuite/gas/i860/ldst03.s
+++ /dev/null
@@ -1,39 +0,0 @@
-# ld.b (no relocations here)
-	.text
-
-	ld.b	0(%r0),%r0
-	ld.b	1(%r1),%r31
-	ld.b	2(%r2),%r30
-	ld.b	513(%r3),%r29
-	ld.b	1028(%r4),%r28
-	ld.b	4090(%r5),%r27
-	ld.b	8190(%r6),%r26
-	ld.b	16385(%r7),%r25
-	ld.b	32007(%r7),%r25
-	ld.b	32767(%r7),%r25
-	ld.b	-32768(%r7),%r25
-	ld.b	-32767(%r7),%r25
-	ld.b	-16383(%r8),%r24
-	ld.b	-8101(%r9),%r23
-	ld.b	-4091(%r10),%r22
-	ld.b	-1023(%r11),%r21
-	ld.b	-509(%r12),%r20
-	ld.b	-23(%r13),%r19
-	ld.b	-1(%r14),%r18
-
-	ld.b	%r5(%r0),%r0
-	ld.b	%r6(%r1),%r31
-	ld.b	%r7(%r2),%r30
-	ld.b	%r8(%r3),%r29
-	ld.b	%r9(%r4),%r28
-	ld.b	%r0(%r5),%r27
-	ld.b	%r1(%r6),%r26
-	ld.b	%r12(%r7),%r25
-	ld.b	%r13(%r8),%r24
-	ld.b	%r14(%r9),%r23
-	ld.b	%r15(%r10),%r22
-	ld.b	%r16(%r11),%r21
-	ld.b	%r17(%r12),%r20
-	ld.b	%r28(%r13),%r19
-	ld.b	%r31(%r14),%r18
-
diff --git a/gas/testsuite/gas/i860/ldst04.d b/gas/testsuite/gas/i860/ldst04.d
deleted file mode 100644
index a9130ac..0000000
--- a/gas/testsuite/gas/i860/ldst04.d
+++ /dev/null
@@ -1,24 +0,0 @@
-#as:
-#objdump: -dr
-#name: i860 ldst04 (st.l)
-
-.*: +file format .*
-
-Disassembly of section \.text:
-
-00000000 <\.text>:
-   0:	01 00 00 1c 	st.l	%r0,0\(%r0\)
-   4:	7d f8 20 1c 	st.l	%r31,124\(%r1\)
-   8:	01 f1 40 1c 	st.l	%r30,256\(%sp\)
-   c:	01 ea 60 1c 	st.l	%r29,512\(%fp\)
-  10:	01 e4 80 1c 	st.l	%r28,1024\(%r4\)
-  14:	01 d8 a2 1c 	st.l	%r27,4096\(%r5\)
-  18:	01 d0 c4 1c 	st.l	%r26,8192\(%r6\)
-  1c:	01 c8 e8 1c 	st.l	%r25,16384\(%r7\)
-  20:	01 c0 18 1d 	st.l	%r24,-16384\(%r8\)
-  24:	01 b8 3c 1d 	st.l	%r23,-8192\(%r9\)
-  28:	01 b0 5e 1d 	st.l	%r22,-4096\(%r10\)
-  2c:	01 ac 7f 1d 	st.l	%r21,-1024\(%r11\)
-  30:	05 a6 9f 1d 	st.l	%r20,-508\(%r12\)
-  34:	09 9f bf 1d 	st.l	%r19,-248\(%r13\)
-  38:	fd 97 df 1d 	st.l	%r18,-4\(%r14\)
diff --git a/gas/testsuite/gas/i860/ldst04.s b/gas/testsuite/gas/i860/ldst04.s
deleted file mode 100644
index 8e22b6f..0000000
--- a/gas/testsuite/gas/i860/ldst04.s
+++ /dev/null
@@ -1,19 +0,0 @@
-# st.l (no relocations here)
-	.text
-
-	st.l	%r0,0(%r0)
-	st.l	%r31,124(%r1)
-	st.l	%r30,256(%r2)
-	st.l	%r29,512(%r3)
-	st.l	%r28,1024(%r4)
-	st.l	%r27,4096(%r5)
-	st.l	%r26,8192(%r6)
-	st.l	%r25,16384(%r7)
-	st.l	%r24,-16384(%r8)
-	st.l	%r23,-8192(%r9)
-	st.l	%r22,-4096(%r10)
-	st.l	%r21,-1024(%r11)
-	st.l	%r20,-508(%r12)
-	st.l	%r19,-248(%r13)
-	st.l	%r18,-4(%r14)
-
diff --git a/gas/testsuite/gas/i860/ldst05.d b/gas/testsuite/gas/i860/ldst05.d
deleted file mode 100644
index e57f822..0000000
--- a/gas/testsuite/gas/i860/ldst05.d
+++ /dev/null
@@ -1,24 +0,0 @@
-#as:
-#objdump: -dr
-#name: i860 ldst05 (st.s)
-
-.*: +file format .*
-
-Disassembly of section \.text:
-
-00000000 <\.text>:
-   0:	00 00 00 1c 	st.s	%r0,0\(%r0\)
-   4:	7a f8 20 1c 	st.s	%r31,122\(%r1\)
-   8:	02 f1 40 1c 	st.s	%r30,258\(%sp\)
-   c:	00 ea 60 1c 	st.s	%r29,512\(%fp\)
-  10:	04 e4 80 1c 	st.s	%r28,1028\(%r4\)
-  14:	fa df a1 1c 	st.s	%r27,4090\(%r5\)
-  18:	fe d7 c3 1c 	st.s	%r26,8190\(%r6\)
-  1c:	00 c8 e8 1c 	st.s	%r25,16384\(%r7\)
-  20:	00 c0 18 1d 	st.s	%r24,-16384\(%r8\)
-  24:	00 b8 3c 1d 	st.s	%r23,-8192\(%r9\)
-  28:	00 b0 5e 1d 	st.s	%r22,-4096\(%r10\)
-  2c:	00 ac 7f 1d 	st.s	%r21,-1024\(%r11\)
-  30:	04 a6 9f 1d 	st.s	%r20,-508\(%r12\)
-  34:	0e 9f bf 1d 	st.s	%r19,-242\(%r13\)
-  38:	fe 97 df 1d 	st.s	%r18,-2\(%r14\)
diff --git a/gas/testsuite/gas/i860/ldst05.s b/gas/testsuite/gas/i860/ldst05.s
deleted file mode 100644
index 7f253f4..0000000
--- a/gas/testsuite/gas/i860/ldst05.s
+++ /dev/null
@@ -1,19 +0,0 @@
-# st.s (no relocations here)
-	.text
-
-	st.s	%r0,0(%r0)
-	st.s	%r31,122(%r1)
-	st.s	%r30,258(%r2)
-	st.s	%r29,512(%r3)
-	st.s	%r28,1028(%r4)
-	st.s	%r27,4090(%r5)
-	st.s	%r26,8190(%r6)
-	st.s	%r25,16384(%r7)
-	st.s	%r24,-16384(%r8)
-	st.s	%r23,-8192(%r9)
-	st.s	%r22,-4096(%r10)
-	st.s	%r21,-1024(%r11)
-	st.s	%r20,-508(%r12)
-	st.s	%r19,-242(%r13)
-	st.s	%r18,-2(%r14)
-
diff --git a/gas/testsuite/gas/i860/ldst06.d b/gas/testsuite/gas/i860/ldst06.d
deleted file mode 100644
index a1c54d1..0000000
--- a/gas/testsuite/gas/i860/ldst06.d
+++ /dev/null
@@ -1,28 +0,0 @@
-#as:
-#objdump: -dr
-#name: i860 ldst06 (st.b)
-
-.*: +file format .*
-
-Disassembly of section \.text:
-
-00000000 <\.text>:
-   0:	00 00 00 0c 	st.b	%r0,0\(%r0\)
-   4:	01 f8 20 0c 	st.b	%r31,1\(%r1\)
-   8:	02 f0 40 0c 	st.b	%r30,2\(%sp\)
-   c:	01 ea 60 0c 	st.b	%r29,513\(%fp\)
-  10:	04 e4 80 0c 	st.b	%r28,1028\(%r4\)
-  14:	fa df a1 0c 	st.b	%r27,4090\(%r5\)
-  18:	fe d7 c3 0c 	st.b	%r26,8190\(%r6\)
-  1c:	01 c8 e8 0c 	st.b	%r25,16385\(%r7\)
-  20:	07 cd ef 0c 	st.b	%r25,32007\(%r7\)
-  24:	ff cf ef 0c 	st.b	%r25,32767\(%r7\)
-  28:	00 c8 f0 0c 	st.b	%r25,-32768\(%r7\)
-  2c:	01 c8 f0 0c 	st.b	%r25,-32767\(%r7\)
-  30:	01 c0 18 0d 	st.b	%r24,-16383\(%r8\)
-  34:	5b b8 3c 0d 	st.b	%r23,-8101\(%r9\)
-  38:	05 b0 5e 0d 	st.b	%r22,-4091\(%r10\)
-  3c:	01 ac 7f 0d 	st.b	%r21,-1023\(%r11\)
-  40:	03 a6 9f 0d 	st.b	%r20,-509\(%r12\)
-  44:	e9 9f bf 0d 	st.b	%r19,-23\(%r13\)
-  48:	ff 97 df 0d 	st.b	%r18,-1\(%r14\)
diff --git a/gas/testsuite/gas/i860/ldst06.s b/gas/testsuite/gas/i860/ldst06.s
deleted file mode 100644
index bb817ab..0000000
--- a/gas/testsuite/gas/i860/ldst06.s
+++ /dev/null
@@ -1,22 +0,0 @@
-# st.b (no relocations here)
-	.text
-
-	st.b	%r0,0(%r0)
-	st.b	%r31,1(%r1)
-	st.b	%r30,2(%r2)
-	st.b	%r29,513(%r3)
-	st.b	%r28,1028(%r4)
-	st.b	%r27,4090(%r5)
-	st.b	%r26,8190(%r6)
-	st.b	%r25,16385(%r7)
-	st.b	%r25,32007(%r7)
-	st.b	%r25,32767(%r7)
-	st.b	%r25,-32768(%r7)
-	st.b	%r25,-32767(%r7)
-	st.b	%r24,-16383(%r8)
-	st.b	%r23,-8101(%r9)
-	st.b	%r22,-4091(%r10)
-	st.b	%r21,-1023(%r11)
-	st.b	%r20,-509(%r12)
-	st.b	%r19,-23(%r13)
-	st.b	%r18,-1(%r14)
diff --git a/gas/testsuite/gas/i860/pfam.d b/gas/testsuite/gas/i860/pfam.d
deleted file mode 100644
index 2d95081..0000000
--- a/gas/testsuite/gas/i860/pfam.d
+++ /dev/null
@@ -1,153 +0,0 @@
-#as:
-#objdump: -dr
-#name: i860 pfam
-
-.*: +file format .*
-
-Disassembly of section \.text:
-
-00000000 <\.text>:
-   0:	00 04 22 48 	r2p1.ss	%f0,%f1,%f2
-   4:	80 1c 85 48 	r2p1.sd	%f3,%f4,%f5
-   8:	80 05 44 48 	r2p1.dd	%f0,%f2,%f4
-   c:	01 0c 43 48 	r2pt.ss	%f1,%f2,%f3
-  10:	81 24 a6 48 	r2pt.sd	%f4,%f5,%f6
-  14:	81 15 86 48 	r2pt.dd	%f2,%f4,%f6
-  18:	02 14 64 48 	r2ap1.ss	%f2,%f3,%f4
-  1c:	82 34 e8 48 	r2ap1.sd	%f6,%f7,%f8
-  20:	82 25 c8 48 	r2ap1.dd	%f4,%f6,%f8
-  24:	03 1c 85 48 	r2apt.ss	%f3,%f4,%f5
-  28:	83 3c 09 49 	r2apt.sd	%f7,%f8,%f9
-  2c:	83 35 0a 49 	r2apt.dd	%f6,%f8,%f10
-  30:	04 24 a6 48 	i2p1.ss	%f4,%f5,%f6
-  34:	84 44 2a 49 	i2p1.sd	%f8,%f9,%f10
-  38:	84 65 d0 49 	i2p1.dd	%f12,%f14,%f16
-  3c:	05 3c 09 49 	i2pt.ss	%f7,%f8,%f9
-  40:	85 5c 8d 49 	i2pt.sd	%f11,%f12,%f13
-  44:	85 75 12 4a 	i2pt.dd	%f14,%f16,%f18
-  48:	06 54 6c 49 	i2ap1.ss	%f10,%f11,%f12
-  4c:	86 74 f0 49 	i2ap1.sd	%f14,%f15,%f16
-  50:	86 85 54 4a 	i2ap1.dd	%f16,%f18,%f20
-  54:	07 6c cf 49 	i2apt.ss	%f13,%f14,%f15
-  58:	87 8c 53 4a 	i2apt.sd	%f17,%f18,%f19
-  5c:	87 95 96 4a 	i2apt.dd	%f18,%f20,%f22
-  60:	08 74 f0 49 	rat1p2.ss	%f14,%f15,%f16
-  64:	88 a4 b6 4a 	rat1p2.sd	%f20,%f21,%f22
-  68:	88 a5 d8 4a 	rat1p2.dd	%f20,%f22,%f24
-  6c:	09 7c 11 4a 	m12apm.ss	%f15,%f16,%f17
-  70:	89 bc 19 4b 	m12apm.sd	%f23,%f24,%f25
-  74:	89 b5 1a 4b 	m12apm.dd	%f22,%f24,%f26
-  78:	0a 94 74 4a 	ra1p2.ss	%f18,%f19,%f20
-  7c:	8a d4 7c 4b 	ra1p2.sd	%f26,%f27,%f28
-  80:	8a a5 d8 4a 	ra1p2.dd	%f20,%f22,%f24
-  84:	0b 9c 95 4a 	m12ttpa.ss	%f19,%f20,%f21
-  88:	8b ec df 4b 	m12ttpa.sd	%f29,%f30,%f31
-  8c:	8b b5 1a 4b 	m12ttpa.dd	%f22,%f24,%f26
-  90:	0c a4 b6 4a 	iat1p2.ss	%f20,%f21,%f22
-  94:	8c 04 22 48 	iat1p2.sd	%f0,%f1,%f2
-  98:	8c c5 5c 4b 	iat1p2.dd	%f24,%f26,%f28
-  9c:	0d ac d7 4a 	m12tpm.ss	%f21,%f22,%f23
-  a0:	8d 1c 85 48 	m12tpm.sd	%f3,%f4,%f5
-  a4:	8d f5 02 48 	m12tpm.dd	%f30,%f0,%f2
-  a8:	0e b4 f8 4a 	ia1p2.ss	%f22,%f23,%f24
-  ac:	8e 34 e8 48 	ia1p2.sd	%f6,%f7,%f8
-  b0:	8e 25 c8 48 	ia1p2.dd	%f4,%f6,%f8
-  b4:	0f bc 19 4b 	m12tpa.ss	%f23,%f24,%f25
-  b8:	8f 4c 4b 49 	m12tpa.sd	%f9,%f10,%f11
-  bc:	8f 35 0a 49 	m12tpa.dd	%f6,%f8,%f10
-  c0:	00 06 22 48 	d.r2p1.ss	%f0,%f1,%f2
-  c4:	00 00 00 a0 	shl	%r0,%r0,%r0
-  c8:	80 1e 85 48 	d.r2p1.sd	%f3,%f4,%f5
-  cc:	00 00 00 a0 	shl	%r0,%r0,%r0
-  d0:	80 07 44 48 	d.r2p1.dd	%f0,%f2,%f4
-  d4:	00 00 00 a0 	shl	%r0,%r0,%r0
-  d8:	01 0e 43 48 	d.r2pt.ss	%f1,%f2,%f3
-  dc:	00 00 00 a0 	shl	%r0,%r0,%r0
-  e0:	81 26 a6 48 	d.r2pt.sd	%f4,%f5,%f6
-  e4:	00 00 00 a0 	shl	%r0,%r0,%r0
-  e8:	81 17 86 48 	d.r2pt.dd	%f2,%f4,%f6
-  ec:	00 00 00 a0 	shl	%r0,%r0,%r0
-  f0:	02 16 64 48 	d.r2ap1.ss	%f2,%f3,%f4
-  f4:	00 00 00 a0 	shl	%r0,%r0,%r0
-  f8:	82 36 e8 48 	d.r2ap1.sd	%f6,%f7,%f8
-  fc:	00 00 00 a0 	shl	%r0,%r0,%r0
- 100:	82 27 c8 48 	d.r2ap1.dd	%f4,%f6,%f8
- 104:	00 00 00 a0 	shl	%r0,%r0,%r0
- 108:	03 1e 85 48 	d.r2apt.ss	%f3,%f4,%f5
- 10c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 110:	83 3e 09 49 	d.r2apt.sd	%f7,%f8,%f9
- 114:	00 00 00 a0 	shl	%r0,%r0,%r0
- 118:	83 37 0a 49 	d.r2apt.dd	%f6,%f8,%f10
- 11c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 120:	04 26 a6 48 	d.i2p1.ss	%f4,%f5,%f6
- 124:	00 00 00 a0 	shl	%r0,%r0,%r0
- 128:	84 46 2a 49 	d.i2p1.sd	%f8,%f9,%f10
- 12c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 130:	84 67 d0 49 	d.i2p1.dd	%f12,%f14,%f16
- 134:	00 00 00 a0 	shl	%r0,%r0,%r0
- 138:	05 3e 09 49 	d.i2pt.ss	%f7,%f8,%f9
- 13c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 140:	85 5e 8d 49 	d.i2pt.sd	%f11,%f12,%f13
- 144:	00 00 00 a0 	shl	%r0,%r0,%r0
- 148:	85 77 12 4a 	d.i2pt.dd	%f14,%f16,%f18
- 14c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 150:	06 56 6c 49 	d.i2ap1.ss	%f10,%f11,%f12
- 154:	00 00 00 a0 	shl	%r0,%r0,%r0
- 158:	86 76 f0 49 	d.i2ap1.sd	%f14,%f15,%f16
- 15c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 160:	86 87 54 4a 	d.i2ap1.dd	%f16,%f18,%f20
- 164:	00 00 00 a0 	shl	%r0,%r0,%r0
- 168:	07 6e cf 49 	d.i2apt.ss	%f13,%f14,%f15
- 16c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 170:	87 8e 53 4a 	d.i2apt.sd	%f17,%f18,%f19
- 174:	00 00 00 a0 	shl	%r0,%r0,%r0
- 178:	87 97 96 4a 	d.i2apt.dd	%f18,%f20,%f22
- 17c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 180:	08 76 f0 49 	d.rat1p2.ss	%f14,%f15,%f16
- 184:	00 00 00 a0 	shl	%r0,%r0,%r0
- 188:	88 a6 b6 4a 	d.rat1p2.sd	%f20,%f21,%f22
- 18c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 190:	88 a7 d8 4a 	d.rat1p2.dd	%f20,%f22,%f24
- 194:	00 00 00 a0 	shl	%r0,%r0,%r0
- 198:	09 7e 11 4a 	d.m12apm.ss	%f15,%f16,%f17
- 19c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1a0:	89 be 19 4b 	d.m12apm.sd	%f23,%f24,%f25
- 1a4:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1a8:	89 b7 1a 4b 	d.m12apm.dd	%f22,%f24,%f26
- 1ac:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1b0:	0a 96 74 4a 	d.ra1p2.ss	%f18,%f19,%f20
- 1b4:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1b8:	8a d6 7c 4b 	d.ra1p2.sd	%f26,%f27,%f28
- 1bc:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1c0:	8a a7 d8 4a 	d.ra1p2.dd	%f20,%f22,%f24
- 1c4:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1c8:	0b 9e 95 4a 	d.m12ttpa.ss	%f19,%f20,%f21
- 1cc:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1d0:	8b ee df 4b 	d.m12ttpa.sd	%f29,%f30,%f31
- 1d4:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1d8:	8b b7 1a 4b 	d.m12ttpa.dd	%f22,%f24,%f26
- 1dc:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1e0:	0c a6 b6 4a 	d.iat1p2.ss	%f20,%f21,%f22
- 1e4:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1e8:	8c 06 22 48 	d.iat1p2.sd	%f0,%f1,%f2
- 1ec:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1f0:	8c c7 5c 4b 	d.iat1p2.dd	%f24,%f26,%f28
- 1f4:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1f8:	0d ae d7 4a 	d.m12tpm.ss	%f21,%f22,%f23
- 1fc:	00 00 00 a0 	shl	%r0,%r0,%r0
- 200:	8d 1e 85 48 	d.m12tpm.sd	%f3,%f4,%f5
- 204:	00 00 00 a0 	shl	%r0,%r0,%r0
- 208:	8d f7 02 48 	d.m12tpm.dd	%f30,%f0,%f2
- 20c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 210:	0e b6 f8 4a 	d.ia1p2.ss	%f22,%f23,%f24
- 214:	00 00 00 a0 	shl	%r0,%r0,%r0
- 218:	8e 36 e8 48 	d.ia1p2.sd	%f6,%f7,%f8
- 21c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 220:	8e 27 c8 48 	d.ia1p2.dd	%f4,%f6,%f8
- 224:	00 00 00 a0 	shl	%r0,%r0,%r0
- 228:	0f be 19 4b 	d.m12tpa.ss	%f23,%f24,%f25
- 22c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 230:	8f 4e 4b 49 	d.m12tpa.sd	%f9,%f10,%f11
- 234:	00 00 00 a0 	shl	%r0,%r0,%r0
- 238:	8f 37 0a 49 	d.m12tpa.dd	%f6,%f8,%f10
- 23c:	00 00 00 a0 	shl	%r0,%r0,%r0
diff --git a/gas/testsuite/gas/i860/pfam.s b/gas/testsuite/gas/i860/pfam.s
deleted file mode 100644
index 4afc28d..0000000
--- a/gas/testsuite/gas/i860/pfam.s
+++ /dev/null
@@ -1,182 +0,0 @@
-# pfam.p family (p={ss,sd,dd})
-
-	.text
-
-	# pfam without dual bit.
-	r2p1.ss	%f0,%f1,%f2
-	r2p1.sd	%f3,%f4,%f5
-	r2p1.dd	%f0,%f2,%f4
-
-	r2pt.ss	%f1,%f2,%f3
-	r2pt.sd	%f4,%f5,%f6
-	r2pt.dd	%f2,%f4,%f6
-
-	r2ap1.ss	%f2,%f3,%f4
-	r2ap1.sd	%f6,%f7,%f8
-	r2ap1.dd	%f4,%f6,%f8
-
-	r2apt.ss	%f3,%f4,%f5
-	r2apt.sd	%f7,%f8,%f9
-	r2apt.dd	%f6,%f8,%f10
-
-	i2p1.ss	%f4,%f5,%f6
-	i2p1.sd	%f8,%f9,%f10
-	i2p1.dd	%f12,%f14,%f16
-
-	i2pt.ss	%f7,%f8,%f9
-	i2pt.sd	%f11,%f12,%f13
-	i2pt.dd	%f14,%f16,%f18
-
-	i2ap1.ss	%f10,%f11,%f12
-	i2ap1.sd	%f14,%f15,%f16
-	i2ap1.dd	%f16,%f18,%f20
-
-	i2apt.ss	%f13,%f14,%f15
-	i2apt.sd	%f17,%f18,%f19
-	i2apt.dd	%f18,%f20,%f22
-
-	rat1p2.ss	%f14,%f15,%f16
-	rat1p2.sd	%f20,%f21,%f22
-	rat1p2.dd	%f20,%f22,%f24
-
-	m12apm.ss	%f15,%f16,%f17
-	m12apm.sd	%f23,%f24,%f25
-	m12apm.dd	%f22,%f24,%f26
-
-	ra1p2.ss	%f18,%f19,%f20
-	ra1p2.sd	%f26,%f27,%f28
-	ra1p2.dd	%f20,%f22,%f24
-
-	m12ttpa.ss	%f19,%f20,%f21
-	m12ttpa.sd	%f29,%f30,%f31
-	m12ttpa.dd	%f22,%f24,%f26
-
-	iat1p2.ss	%f20,%f21,%f22
-	iat1p2.sd	%f0,%f1,%f2
-	iat1p2.dd	%f24,%f26,%f28
-
-	m12tpm.ss	%f21,%f22,%f23
-	m12tpm.sd	%f3,%f4,%f5
-	m12tpm.dd	%f30,%f0,%f2
-
-	ia1p2.ss	%f22,%f23,%f24
-	ia1p2.sd	%f6,%f7,%f8
-	ia1p2.dd	%f4,%f6,%f8
-
-	m12tpa.ss	%f23,%f24,%f25
-	m12tpa.sd	%f9,%f10,%f11
-	m12tpa.dd	%f6,%f8,%f10
-
-	# pfam with dual bit.
-	d.r2p1.ss	%f0,%f1,%f2
-	nop
-	d.r2p1.sd	%f3,%f4,%f5
-	nop
-	d.r2p1.dd	%f0,%f2,%f4
-	nop
-
-	d.r2pt.ss	%f1,%f2,%f3
-	nop
-	d.r2pt.sd	%f4,%f5,%f6
-	nop
-	d.r2pt.dd	%f2,%f4,%f6
-	nop
-
-	d.r2ap1.ss	%f2,%f3,%f4
-	nop
-	d.r2ap1.sd	%f6,%f7,%f8
-	nop
-	d.r2ap1.dd	%f4,%f6,%f8
-	nop
-
-	d.r2apt.ss	%f3,%f4,%f5
-	nop
-	d.r2apt.sd	%f7,%f8,%f9
-	nop
-	d.r2apt.dd	%f6,%f8,%f10
-	nop
-
-	d.i2p1.ss	%f4,%f5,%f6
-	nop
-	d.i2p1.sd	%f8,%f9,%f10
-	nop
-	d.i2p1.dd	%f12,%f14,%f16
-	nop
-
-	d.i2pt.ss	%f7,%f8,%f9
-	nop
-	d.i2pt.sd	%f11,%f12,%f13
-	nop
-	d.i2pt.dd	%f14,%f16,%f18
-	nop
-
-	d.i2ap1.ss	%f10,%f11,%f12
-	nop
-	d.i2ap1.sd	%f14,%f15,%f16
-	nop
-	d.i2ap1.dd	%f16,%f18,%f20
-	nop
-
-	d.i2apt.ss	%f13,%f14,%f15
-	nop
-	d.i2apt.sd	%f17,%f18,%f19
-	nop
-	d.i2apt.dd	%f18,%f20,%f22
-	nop
-
-	d.rat1p2.ss	%f14,%f15,%f16
-	nop
-	d.rat1p2.sd	%f20,%f21,%f22
-	nop
-	d.rat1p2.dd	%f20,%f22,%f24
-	nop
-
-	d.m12apm.ss	%f15,%f16,%f17
-	nop
-	d.m12apm.sd	%f23,%f24,%f25
-	nop
-	d.m12apm.dd	%f22,%f24,%f26
-	nop
-
-	d.ra1p2.ss	%f18,%f19,%f20
-	nop
-	d.ra1p2.sd	%f26,%f27,%f28
-	nop
-	d.ra1p2.dd	%f20,%f22,%f24
-	nop
-
-	d.m12ttpa.ss	%f19,%f20,%f21
-	nop
-	d.m12ttpa.sd	%f29,%f30,%f31
-	nop
-	d.m12ttpa.dd	%f22,%f24,%f26
-	nop
-
-	d.iat1p2.ss	%f20,%f21,%f22
-	nop
-	d.iat1p2.sd	%f0,%f1,%f2
-	nop
-	d.iat1p2.dd	%f24,%f26,%f28
-	nop
-
-	d.m12tpm.ss	%f21,%f22,%f23
-	nop
-	d.m12tpm.sd	%f3,%f4,%f5
-	nop
-	d.m12tpm.dd	%f30,%f0,%f2
-	nop
-
-	d.ia1p2.ss	%f22,%f23,%f24
-	nop
-	d.ia1p2.sd	%f6,%f7,%f8
-	nop
-	d.ia1p2.dd	%f4,%f6,%f8
-	nop
-
-	d.m12tpa.ss	%f23,%f24,%f25
-	nop
-	d.m12tpa.sd	%f9,%f10,%f11
-	nop
-	d.m12tpa.dd	%f6,%f8,%f10
-	nop
-
diff --git a/gas/testsuite/gas/i860/pfmam.d b/gas/testsuite/gas/i860/pfmam.d
deleted file mode 100644
index 63f48a4..0000000
--- a/gas/testsuite/gas/i860/pfmam.d
+++ /dev/null
@@ -1,153 +0,0 @@
-#as:
-#objdump: -dr
-#name: i860 pfmam
-
-.*: +file format .*
-
-Disassembly of section \.text:
-
-00000000 <\.text>:
-   0:	00 00 22 48 	mr2p1.ss	%f0,%f1,%f2
-   4:	80 18 85 48 	mr2p1.sd	%f3,%f4,%f5
-   8:	80 01 44 48 	mr2p1.dd	%f0,%f2,%f4
-   c:	01 08 43 48 	mr2pt.ss	%f1,%f2,%f3
-  10:	81 20 a6 48 	mr2pt.sd	%f4,%f5,%f6
-  14:	81 11 86 48 	mr2pt.dd	%f2,%f4,%f6
-  18:	02 10 64 48 	mr2mp1.ss	%f2,%f3,%f4
-  1c:	82 30 e8 48 	mr2mp1.sd	%f6,%f7,%f8
-  20:	82 21 c8 48 	mr2mp1.dd	%f4,%f6,%f8
-  24:	03 18 85 48 	mr2mpt.ss	%f3,%f4,%f5
-  28:	83 38 09 49 	mr2mpt.sd	%f7,%f8,%f9
-  2c:	83 31 0a 49 	mr2mpt.dd	%f6,%f8,%f10
-  30:	04 20 a6 48 	mi2p1.ss	%f4,%f5,%f6
-  34:	84 40 2a 49 	mi2p1.sd	%f8,%f9,%f10
-  38:	84 61 d0 49 	mi2p1.dd	%f12,%f14,%f16
-  3c:	05 38 09 49 	mi2pt.ss	%f7,%f8,%f9
-  40:	85 58 8d 49 	mi2pt.sd	%f11,%f12,%f13
-  44:	85 71 12 4a 	mi2pt.dd	%f14,%f16,%f18
-  48:	06 50 6c 49 	mi2mp1.ss	%f10,%f11,%f12
-  4c:	86 70 f0 49 	mi2mp1.sd	%f14,%f15,%f16
-  50:	86 81 54 4a 	mi2mp1.dd	%f16,%f18,%f20
-  54:	07 68 cf 49 	mi2mpt.ss	%f13,%f14,%f15
-  58:	87 88 53 4a 	mi2mpt.sd	%f17,%f18,%f19
-  5c:	87 91 96 4a 	mi2mpt.dd	%f18,%f20,%f22
-  60:	08 70 f0 49 	mrmt1p2.ss	%f14,%f15,%f16
-  64:	88 a0 b6 4a 	mrmt1p2.sd	%f20,%f21,%f22
-  68:	88 a1 d8 4a 	mrmt1p2.dd	%f20,%f22,%f24
-  6c:	09 78 11 4a 	mm12mpm.ss	%f15,%f16,%f17
-  70:	89 b8 19 4b 	mm12mpm.sd	%f23,%f24,%f25
-  74:	89 b1 1a 4b 	mm12mpm.dd	%f22,%f24,%f26
-  78:	0a 90 74 4a 	mrm1p2.ss	%f18,%f19,%f20
-  7c:	8a d0 7c 4b 	mrm1p2.sd	%f26,%f27,%f28
-  80:	8a a1 d8 4a 	mrm1p2.dd	%f20,%f22,%f24
-  84:	0b 98 95 4a 	mm12ttpm.ss	%f19,%f20,%f21
-  88:	8b e8 df 4b 	mm12ttpm.sd	%f29,%f30,%f31
-  8c:	8b b1 1a 4b 	mm12ttpm.dd	%f22,%f24,%f26
-  90:	0c a0 b6 4a 	mimt1p2.ss	%f20,%f21,%f22
-  94:	8c 00 22 48 	mimt1p2.sd	%f0,%f1,%f2
-  98:	8c c1 5c 4b 	mimt1p2.dd	%f24,%f26,%f28
-  9c:	0d a8 d7 4a 	mm12tpm.ss	%f21,%f22,%f23
-  a0:	8d 18 85 48 	mm12tpm.sd	%f3,%f4,%f5
-  a4:	8d f1 02 48 	mm12tpm.dd	%f30,%f0,%f2
-  a8:	0e b0 f8 4a 	mim1p2.ss	%f22,%f23,%f24
-  ac:	8e 30 e8 48 	mim1p2.sd	%f6,%f7,%f8
-  b0:	8e 21 c8 48 	mim1p2.dd	%f4,%f6,%f8
-  b4:	0f bc 19 4b 	m12tpa.ss	%f23,%f24,%f25
-  b8:	8f 4c 4b 49 	m12tpa.sd	%f9,%f10,%f11
-  bc:	8f 35 0a 49 	m12tpa.dd	%f6,%f8,%f10
-  c0:	00 02 22 48 	d.mr2p1.ss	%f0,%f1,%f2
-  c4:	00 00 00 a0 	shl	%r0,%r0,%r0
-  c8:	80 1a 85 48 	d.mr2p1.sd	%f3,%f4,%f5
-  cc:	00 00 00 a0 	shl	%r0,%r0,%r0
-  d0:	80 03 44 48 	d.mr2p1.dd	%f0,%f2,%f4
-  d4:	00 00 00 a0 	shl	%r0,%r0,%r0
-  d8:	01 0a 43 48 	d.mr2pt.ss	%f1,%f2,%f3
-  dc:	00 00 00 a0 	shl	%r0,%r0,%r0
-  e0:	81 22 a6 48 	d.mr2pt.sd	%f4,%f5,%f6
-  e4:	00 00 00 a0 	shl	%r0,%r0,%r0
-  e8:	81 13 86 48 	d.mr2pt.dd	%f2,%f4,%f6
-  ec:	00 00 00 a0 	shl	%r0,%r0,%r0
-  f0:	02 12 64 48 	d.mr2mp1.ss	%f2,%f3,%f4
-  f4:	00 00 00 a0 	shl	%r0,%r0,%r0
-  f8:	82 32 e8 48 	d.mr2mp1.sd	%f6,%f7,%f8
-  fc:	00 00 00 a0 	shl	%r0,%r0,%r0
- 100:	82 23 c8 48 	d.mr2mp1.dd	%f4,%f6,%f8
- 104:	00 00 00 a0 	shl	%r0,%r0,%r0
- 108:	03 1a 85 48 	d.mr2mpt.ss	%f3,%f4,%f5
- 10c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 110:	83 3a 09 49 	d.mr2mpt.sd	%f7,%f8,%f9
- 114:	00 00 00 a0 	shl	%r0,%r0,%r0
- 118:	83 33 0a 49 	d.mr2mpt.dd	%f6,%f8,%f10
- 11c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 120:	04 22 a6 48 	d.mi2p1.ss	%f4,%f5,%f6
- 124:	00 00 00 a0 	shl	%r0,%r0,%r0
- 128:	84 42 2a 49 	d.mi2p1.sd	%f8,%f9,%f10
- 12c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 130:	84 63 d0 49 	d.mi2p1.dd	%f12,%f14,%f16
- 134:	00 00 00 a0 	shl	%r0,%r0,%r0
- 138:	05 3a 09 49 	d.mi2pt.ss	%f7,%f8,%f9
- 13c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 140:	85 5a 8d 49 	d.mi2pt.sd	%f11,%f12,%f13
- 144:	00 00 00 a0 	shl	%r0,%r0,%r0
- 148:	85 73 12 4a 	d.mi2pt.dd	%f14,%f16,%f18
- 14c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 150:	06 52 6c 49 	d.mi2mp1.ss	%f10,%f11,%f12
- 154:	00 00 00 a0 	shl	%r0,%r0,%r0
- 158:	86 72 f0 49 	d.mi2mp1.sd	%f14,%f15,%f16
- 15c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 160:	86 83 54 4a 	d.mi2mp1.dd	%f16,%f18,%f20
- 164:	00 00 00 a0 	shl	%r0,%r0,%r0
- 168:	07 6a cf 49 	d.mi2mpt.ss	%f13,%f14,%f15
- 16c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 170:	87 8a 53 4a 	d.mi2mpt.sd	%f17,%f18,%f19
- 174:	00 00 00 a0 	shl	%r0,%r0,%r0
- 178:	87 93 96 4a 	d.mi2mpt.dd	%f18,%f20,%f22
- 17c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 180:	08 72 f0 49 	d.mrmt1p2.ss	%f14,%f15,%f16
- 184:	00 00 00 a0 	shl	%r0,%r0,%r0
- 188:	88 a2 b6 4a 	d.mrmt1p2.sd	%f20,%f21,%f22
- 18c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 190:	88 a3 d8 4a 	d.mrmt1p2.dd	%f20,%f22,%f24
- 194:	00 00 00 a0 	shl	%r0,%r0,%r0
- 198:	09 7a 11 4a 	d.mm12mpm.ss	%f15,%f16,%f17
- 19c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1a0:	89 ba 19 4b 	d.mm12mpm.sd	%f23,%f24,%f25
- 1a4:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1a8:	89 b3 1a 4b 	d.mm12mpm.dd	%f22,%f24,%f26
- 1ac:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1b0:	0a 92 74 4a 	d.mrm1p2.ss	%f18,%f19,%f20
- 1b4:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1b8:	8a d2 7c 4b 	d.mrm1p2.sd	%f26,%f27,%f28
- 1bc:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1c0:	8a a3 d8 4a 	d.mrm1p2.dd	%f20,%f22,%f24
- 1c4:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1c8:	0b 9a 95 4a 	d.mm12ttpm.ss	%f19,%f20,%f21
- 1cc:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1d0:	8b ea df 4b 	d.mm12ttpm.sd	%f29,%f30,%f31
- 1d4:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1d8:	8b b3 1a 4b 	d.mm12ttpm.dd	%f22,%f24,%f26
- 1dc:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1e0:	0c a2 b6 4a 	d.mimt1p2.ss	%f20,%f21,%f22
- 1e4:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1e8:	8c 02 22 48 	d.mimt1p2.sd	%f0,%f1,%f2
- 1ec:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1f0:	8c c3 5c 4b 	d.mimt1p2.dd	%f24,%f26,%f28
- 1f4:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1f8:	0d aa d7 4a 	d.mm12tpm.ss	%f21,%f22,%f23
- 1fc:	00 00 00 a0 	shl	%r0,%r0,%r0
- 200:	8d 1a 85 48 	d.mm12tpm.sd	%f3,%f4,%f5
- 204:	00 00 00 a0 	shl	%r0,%r0,%r0
- 208:	8d f3 02 48 	d.mm12tpm.dd	%f30,%f0,%f2
- 20c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 210:	0e b2 f8 4a 	d.mim1p2.ss	%f22,%f23,%f24
- 214:	00 00 00 a0 	shl	%r0,%r0,%r0
- 218:	8e 32 e8 48 	d.mim1p2.sd	%f6,%f7,%f8
- 21c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 220:	8e 23 c8 48 	d.mim1p2.dd	%f4,%f6,%f8
- 224:	00 00 00 a0 	shl	%r0,%r0,%r0
- 228:	0f be 19 4b 	d.m12tpa.ss	%f23,%f24,%f25
- 22c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 230:	8f 4e 4b 49 	d.m12tpa.sd	%f9,%f10,%f11
- 234:	00 00 00 a0 	shl	%r0,%r0,%r0
- 238:	8f 37 0a 49 	d.m12tpa.dd	%f6,%f8,%f10
- 23c:	00 00 00 a0 	shl	%r0,%r0,%r0
diff --git a/gas/testsuite/gas/i860/pfmam.s b/gas/testsuite/gas/i860/pfmam.s
deleted file mode 100644
index ac6a1af..0000000
--- a/gas/testsuite/gas/i860/pfmam.s
+++ /dev/null
@@ -1,182 +0,0 @@
-# pfmam.p family (p={ss,sd,dd})
-
-	.text
-
-	# pfmam without dual bit.
-	mr2p1.ss	%f0,%f1,%f2
-	mr2p1.sd	%f3,%f4,%f5
-	mr2p1.dd	%f0,%f2,%f4
-
-	mr2pt.ss	%f1,%f2,%f3
-	mr2pt.sd	%f4,%f5,%f6
-	mr2pt.dd	%f2,%f4,%f6
-
-	mr2mp1.ss	%f2,%f3,%f4
-	mr2mp1.sd	%f6,%f7,%f8
-	mr2mp1.dd	%f4,%f6,%f8
-
-	mr2mpt.ss	%f3,%f4,%f5
-	mr2mpt.sd	%f7,%f8,%f9
-	mr2mpt.dd	%f6,%f8,%f10
-
-	mi2p1.ss	%f4,%f5,%f6
-	mi2p1.sd	%f8,%f9,%f10
-	mi2p1.dd	%f12,%f14,%f16
-
-	mi2pt.ss	%f7,%f8,%f9
-	mi2pt.sd	%f11,%f12,%f13
-	mi2pt.dd	%f14,%f16,%f18
-
-	mi2mp1.ss	%f10,%f11,%f12
-	mi2mp1.sd	%f14,%f15,%f16
-	mi2mp1.dd	%f16,%f18,%f20
-
-	mi2mpt.ss	%f13,%f14,%f15
-	mi2mpt.sd	%f17,%f18,%f19
-	mi2mpt.dd	%f18,%f20,%f22
-
-	mrmt1p2.ss	%f14,%f15,%f16
-	mrmt1p2.sd	%f20,%f21,%f22
-	mrmt1p2.dd	%f20,%f22,%f24
-
-	mm12mpm.ss	%f15,%f16,%f17
-	mm12mpm.sd	%f23,%f24,%f25
-	mm12mpm.dd	%f22,%f24,%f26
-
-	mrm1p2.ss	%f18,%f19,%f20
-	mrm1p2.sd	%f26,%f27,%f28
-	mrm1p2.dd	%f20,%f22,%f24
-
-	mm12ttpm.ss	%f19,%f20,%f21
-	mm12ttpm.sd	%f29,%f30,%f31
-	mm12ttpm.dd	%f22,%f24,%f26
-
-	mimt1p2.ss	%f20,%f21,%f22
-	mimt1p2.sd	%f0,%f1,%f2
-	mimt1p2.dd	%f24,%f26,%f28
-
-	mm12tpm.ss	%f21,%f22,%f23
-	mm12tpm.sd	%f3,%f4,%f5
-	mm12tpm.dd	%f30,%f0,%f2
-
-	mim1p2.ss	%f22,%f23,%f24
-	mim1p2.sd	%f6,%f7,%f8
-	mim1p2.dd	%f4,%f6,%f8
-
-	m12tpa.ss	%f23,%f24,%f25
-	m12tpa.sd	%f9,%f10,%f11
-	m12tpa.dd	%f6,%f8,%f10
-
-	# pfmam with dual bit.
-	d.mr2p1.ss	%f0,%f1,%f2
-	nop
-	d.mr2p1.sd	%f3,%f4,%f5
-	nop
-	d.mr2p1.dd	%f0,%f2,%f4
-	nop
-
-	d.mr2pt.ss	%f1,%f2,%f3
-	nop
-	d.mr2pt.sd	%f4,%f5,%f6
-	nop
-	d.mr2pt.dd	%f2,%f4,%f6
-	nop
-
-	d.mr2mp1.ss	%f2,%f3,%f4
-	nop
-	d.mr2mp1.sd	%f6,%f7,%f8
-	nop
-	d.mr2mp1.dd	%f4,%f6,%f8
-	nop
-
-	d.mr2mpt.ss	%f3,%f4,%f5
-	nop
-	d.mr2mpt.sd	%f7,%f8,%f9
-	nop
-	d.mr2mpt.dd	%f6,%f8,%f10
-	nop
-
-	d.mi2p1.ss	%f4,%f5,%f6
-	nop
-	d.mi2p1.sd	%f8,%f9,%f10
-	nop
-	d.mi2p1.dd	%f12,%f14,%f16
-	nop
-
-	d.mi2pt.ss	%f7,%f8,%f9
-	nop
-	d.mi2pt.sd	%f11,%f12,%f13
-	nop
-	d.mi2pt.dd	%f14,%f16,%f18
-	nop
-
-	d.mi2mp1.ss	%f10,%f11,%f12
-	nop
-	d.mi2mp1.sd	%f14,%f15,%f16
-	nop
-	d.mi2mp1.dd	%f16,%f18,%f20
-	nop
-
-	d.mi2mpt.ss	%f13,%f14,%f15
-	nop
-	d.mi2mpt.sd	%f17,%f18,%f19
-	nop
-	d.mi2mpt.dd	%f18,%f20,%f22
-	nop
-
-	d.mrmt1p2.ss	%f14,%f15,%f16
-	nop
-	d.mrmt1p2.sd	%f20,%f21,%f22
-	nop
-	d.mrmt1p2.dd	%f20,%f22,%f24
-	nop
-
-	d.mm12mpm.ss	%f15,%f16,%f17
-	nop
-	d.mm12mpm.sd	%f23,%f24,%f25
-	nop
-	d.mm12mpm.dd	%f22,%f24,%f26
-	nop
-
-	d.mrm1p2.ss	%f18,%f19,%f20
-	nop
-	d.mrm1p2.sd	%f26,%f27,%f28
-	nop
-	d.mrm1p2.dd	%f20,%f22,%f24
-	nop
-
-	d.mm12ttpm.ss	%f19,%f20,%f21
-	nop
-	d.mm12ttpm.sd	%f29,%f30,%f31
-	nop
-	d.mm12ttpm.dd	%f22,%f24,%f26
-	nop
-
-	d.mimt1p2.ss	%f20,%f21,%f22
-	nop
-	d.mimt1p2.sd	%f0,%f1,%f2
-	nop
-	d.mimt1p2.dd	%f24,%f26,%f28
-	nop
-
-	d.mm12tpm.ss	%f21,%f22,%f23
-	nop
-	d.mm12tpm.sd	%f3,%f4,%f5
-	nop
-	d.mm12tpm.dd	%f30,%f0,%f2
-	nop
-
-	d.mim1p2.ss	%f22,%f23,%f24
-	nop
-	d.mim1p2.sd	%f6,%f7,%f8
-	nop
-	d.mim1p2.dd	%f4,%f6,%f8
-	nop
-
-	d.m12tpa.ss	%f23,%f24,%f25
-	nop
-	d.m12tpa.sd	%f9,%f10,%f11
-	nop
-	d.m12tpa.dd	%f6,%f8,%f10
-	nop
-
diff --git a/gas/testsuite/gas/i860/pfmsm.d b/gas/testsuite/gas/i860/pfmsm.d
deleted file mode 100644
index 65d7e97..0000000
--- a/gas/testsuite/gas/i860/pfmsm.d
+++ /dev/null
@@ -1,153 +0,0 @@
-#as:
-#objdump: -dr
-#name: i860 pfmsm
-
-.*: +file format .*
-
-Disassembly of section \.text:
-
-00000000 <\.text>:
-   0:	10 00 22 48 	mr2s1.ss	%f0,%f1,%f2
-   4:	90 18 85 48 	mr2s1.sd	%f3,%f4,%f5
-   8:	90 01 44 48 	mr2s1.dd	%f0,%f2,%f4
-   c:	11 08 43 48 	mr2st.ss	%f1,%f2,%f3
-  10:	91 20 a6 48 	mr2st.sd	%f4,%f5,%f6
-  14:	91 11 86 48 	mr2st.dd	%f2,%f4,%f6
-  18:	12 10 64 48 	mr2ms1.ss	%f2,%f3,%f4
-  1c:	92 30 e8 48 	mr2ms1.sd	%f6,%f7,%f8
-  20:	92 21 c8 48 	mr2ms1.dd	%f4,%f6,%f8
-  24:	13 18 85 48 	mr2mst.ss	%f3,%f4,%f5
-  28:	93 38 09 49 	mr2mst.sd	%f7,%f8,%f9
-  2c:	93 31 0a 49 	mr2mst.dd	%f6,%f8,%f10
-  30:	14 20 a6 48 	mi2s1.ss	%f4,%f5,%f6
-  34:	94 40 2a 49 	mi2s1.sd	%f8,%f9,%f10
-  38:	94 61 d0 49 	mi2s1.dd	%f12,%f14,%f16
-  3c:	15 38 09 49 	mi2st.ss	%f7,%f8,%f9
-  40:	95 58 8d 49 	mi2st.sd	%f11,%f12,%f13
-  44:	95 71 12 4a 	mi2st.dd	%f14,%f16,%f18
-  48:	16 50 6c 49 	mi2ms1.ss	%f10,%f11,%f12
-  4c:	96 70 f0 49 	mi2ms1.sd	%f14,%f15,%f16
-  50:	96 81 54 4a 	mi2ms1.dd	%f16,%f18,%f20
-  54:	17 68 cf 49 	mi2mst.ss	%f13,%f14,%f15
-  58:	97 88 53 4a 	mi2mst.sd	%f17,%f18,%f19
-  5c:	97 91 96 4a 	mi2mst.dd	%f18,%f20,%f22
-  60:	18 70 f0 49 	mrmt1s2.ss	%f14,%f15,%f16
-  64:	98 a0 b6 4a 	mrmt1s2.sd	%f20,%f21,%f22
-  68:	98 a1 d8 4a 	mrmt1s2.dd	%f20,%f22,%f24
-  6c:	19 78 11 4a 	mm12msm.ss	%f15,%f16,%f17
-  70:	99 b8 19 4b 	mm12msm.sd	%f23,%f24,%f25
-  74:	99 b1 1a 4b 	mm12msm.dd	%f22,%f24,%f26
-  78:	1a 90 74 4a 	mrm1s2.ss	%f18,%f19,%f20
-  7c:	9a d0 7c 4b 	mrm1s2.sd	%f26,%f27,%f28
-  80:	9a a1 d8 4a 	mrm1s2.dd	%f20,%f22,%f24
-  84:	1b 98 95 4a 	mm12ttsm.ss	%f19,%f20,%f21
-  88:	9b e8 df 4b 	mm12ttsm.sd	%f29,%f30,%f31
-  8c:	9b b1 1a 4b 	mm12ttsm.dd	%f22,%f24,%f26
-  90:	1c a0 b6 4a 	mimt1s2.ss	%f20,%f21,%f22
-  94:	9c 00 22 48 	mimt1s2.sd	%f0,%f1,%f2
-  98:	9c c1 5c 4b 	mimt1s2.dd	%f24,%f26,%f28
-  9c:	1d a8 d7 4a 	mm12tsm.ss	%f21,%f22,%f23
-  a0:	9d 18 85 48 	mm12tsm.sd	%f3,%f4,%f5
-  a4:	9d f1 02 48 	mm12tsm.dd	%f30,%f0,%f2
-  a8:	1e b0 f8 4a 	mim1s2.ss	%f22,%f23,%f24
-  ac:	9e 30 e8 48 	mim1s2.sd	%f6,%f7,%f8
-  b0:	9e 21 c8 48 	mim1s2.dd	%f4,%f6,%f8
-  b4:	1f bc 19 4b 	m12tsa.ss	%f23,%f24,%f25
-  b8:	9f 4c 4b 49 	m12tsa.sd	%f9,%f10,%f11
-  bc:	9f 35 0a 49 	m12tsa.dd	%f6,%f8,%f10
-  c0:	10 02 22 48 	d.mr2s1.ss	%f0,%f1,%f2
-  c4:	00 00 00 a0 	shl	%r0,%r0,%r0
-  c8:	90 1a 85 48 	d.mr2s1.sd	%f3,%f4,%f5
-  cc:	00 00 00 a0 	shl	%r0,%r0,%r0
-  d0:	90 03 44 48 	d.mr2s1.dd	%f0,%f2,%f4
-  d4:	00 00 00 a0 	shl	%r0,%r0,%r0
-  d8:	11 0a 43 48 	d.mr2st.ss	%f1,%f2,%f3
-  dc:	00 00 00 a0 	shl	%r0,%r0,%r0
-  e0:	91 22 a6 48 	d.mr2st.sd	%f4,%f5,%f6
-  e4:	00 00 00 a0 	shl	%r0,%r0,%r0
-  e8:	91 13 86 48 	d.mr2st.dd	%f2,%f4,%f6
-  ec:	00 00 00 a0 	shl	%r0,%r0,%r0
-  f0:	12 12 64 48 	d.mr2ms1.ss	%f2,%f3,%f4
-  f4:	00 00 00 a0 	shl	%r0,%r0,%r0
-  f8:	92 32 e8 48 	d.mr2ms1.sd	%f6,%f7,%f8
-  fc:	00 00 00 a0 	shl	%r0,%r0,%r0
- 100:	92 23 c8 48 	d.mr2ms1.dd	%f4,%f6,%f8
- 104:	00 00 00 a0 	shl	%r0,%r0,%r0
- 108:	13 1a 85 48 	d.mr2mst.ss	%f3,%f4,%f5
- 10c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 110:	93 3a 09 49 	d.mr2mst.sd	%f7,%f8,%f9
- 114:	00 00 00 a0 	shl	%r0,%r0,%r0
- 118:	93 33 0a 49 	d.mr2mst.dd	%f6,%f8,%f10
- 11c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 120:	14 22 a6 48 	d.mi2s1.ss	%f4,%f5,%f6
- 124:	00 00 00 a0 	shl	%r0,%r0,%r0
- 128:	94 42 2a 49 	d.mi2s1.sd	%f8,%f9,%f10
- 12c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 130:	94 63 d0 49 	d.mi2s1.dd	%f12,%f14,%f16
- 134:	00 00 00 a0 	shl	%r0,%r0,%r0
- 138:	15 3a 09 49 	d.mi2st.ss	%f7,%f8,%f9
- 13c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 140:	95 5a 8d 49 	d.mi2st.sd	%f11,%f12,%f13
- 144:	00 00 00 a0 	shl	%r0,%r0,%r0
- 148:	95 73 12 4a 	d.mi2st.dd	%f14,%f16,%f18
- 14c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 150:	16 52 6c 49 	d.mi2ms1.ss	%f10,%f11,%f12
- 154:	00 00 00 a0 	shl	%r0,%r0,%r0
- 158:	96 72 f0 49 	d.mi2ms1.sd	%f14,%f15,%f16
- 15c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 160:	96 83 54 4a 	d.mi2ms1.dd	%f16,%f18,%f20
- 164:	00 00 00 a0 	shl	%r0,%r0,%r0
- 168:	17 6a cf 49 	d.mi2mst.ss	%f13,%f14,%f15
- 16c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 170:	97 8a 53 4a 	d.mi2mst.sd	%f17,%f18,%f19
- 174:	00 00 00 a0 	shl	%r0,%r0,%r0
- 178:	97 93 96 4a 	d.mi2mst.dd	%f18,%f20,%f22
- 17c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 180:	18 72 f0 49 	d.mrmt1s2.ss	%f14,%f15,%f16
- 184:	00 00 00 a0 	shl	%r0,%r0,%r0
- 188:	98 a2 b6 4a 	d.mrmt1s2.sd	%f20,%f21,%f22
- 18c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 190:	98 a3 d8 4a 	d.mrmt1s2.dd	%f20,%f22,%f24
- 194:	00 00 00 a0 	shl	%r0,%r0,%r0
- 198:	19 7a 11 4a 	d.mm12msm.ss	%f15,%f16,%f17
- 19c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1a0:	99 ba 19 4b 	d.mm12msm.sd	%f23,%f24,%f25
- 1a4:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1a8:	99 b3 1a 4b 	d.mm12msm.dd	%f22,%f24,%f26
- 1ac:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1b0:	1a 92 74 4a 	d.mrm1s2.ss	%f18,%f19,%f20
- 1b4:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1b8:	9a d2 7c 4b 	d.mrm1s2.sd	%f26,%f27,%f28
- 1bc:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1c0:	9a a3 d8 4a 	d.mrm1s2.dd	%f20,%f22,%f24
- 1c4:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1c8:	1b 9a 95 4a 	d.mm12ttsm.ss	%f19,%f20,%f21
- 1cc:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1d0:	9b ea df 4b 	d.mm12ttsm.sd	%f29,%f30,%f31
- 1d4:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1d8:	9b b3 1a 4b 	d.mm12ttsm.dd	%f22,%f24,%f26
- 1dc:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1e0:	1c a2 b6 4a 	d.mimt1s2.ss	%f20,%f21,%f22
- 1e4:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1e8:	9c 02 22 48 	d.mimt1s2.sd	%f0,%f1,%f2
- 1ec:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1f0:	9c c3 5c 4b 	d.mimt1s2.dd	%f24,%f26,%f28
- 1f4:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1f8:	1d aa d7 4a 	d.mm12tsm.ss	%f21,%f22,%f23
- 1fc:	00 00 00 a0 	shl	%r0,%r0,%r0
- 200:	9d 1a 85 48 	d.mm12tsm.sd	%f3,%f4,%f5
- 204:	00 00 00 a0 	shl	%r0,%r0,%r0
- 208:	9d f3 02 48 	d.mm12tsm.dd	%f30,%f0,%f2
- 20c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 210:	1e b2 f8 4a 	d.mim1s2.ss	%f22,%f23,%f24
- 214:	00 00 00 a0 	shl	%r0,%r0,%r0
- 218:	9e 32 e8 48 	d.mim1s2.sd	%f6,%f7,%f8
- 21c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 220:	9e 23 c8 48 	d.mim1s2.dd	%f4,%f6,%f8
- 224:	00 00 00 a0 	shl	%r0,%r0,%r0
- 228:	1f be 19 4b 	d.m12tsa.ss	%f23,%f24,%f25
- 22c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 230:	9f 4e 4b 49 	d.m12tsa.sd	%f9,%f10,%f11
- 234:	00 00 00 a0 	shl	%r0,%r0,%r0
- 238:	9f 37 0a 49 	d.m12tsa.dd	%f6,%f8,%f10
- 23c:	00 00 00 a0 	shl	%r0,%r0,%r0
diff --git a/gas/testsuite/gas/i860/pfmsm.s b/gas/testsuite/gas/i860/pfmsm.s
deleted file mode 100644
index 26c9166..0000000
--- a/gas/testsuite/gas/i860/pfmsm.s
+++ /dev/null
@@ -1,182 +0,0 @@
-# pfmsm.p family (p={ss,sd,dd})
-
-	.text
-
-	# pfmsm without dual bit
-	mr2s1.ss	%f0,%f1,%f2
-	mr2s1.sd	%f3,%f4,%f5
-	mr2s1.dd	%f0,%f2,%f4
-
-	mr2st.ss	%f1,%f2,%f3
-	mr2st.sd	%f4,%f5,%f6
-	mr2st.dd	%f2,%f4,%f6
-
-	mr2ms1.ss	%f2,%f3,%f4
-	mr2ms1.sd	%f6,%f7,%f8
-	mr2ms1.dd	%f4,%f6,%f8
-
-	mr2mst.ss	%f3,%f4,%f5
-	mr2mst.sd	%f7,%f8,%f9
-	mr2mst.dd	%f6,%f8,%f10
-
-	mi2s1.ss	%f4,%f5,%f6
-	mi2s1.sd	%f8,%f9,%f10
-	mi2s1.dd	%f12,%f14,%f16
-
-	mi2st.ss	%f7,%f8,%f9
-	mi2st.sd	%f11,%f12,%f13
-	mi2st.dd	%f14,%f16,%f18
-
-	mi2ms1.ss	%f10,%f11,%f12
-	mi2ms1.sd	%f14,%f15,%f16
-	mi2ms1.dd	%f16,%f18,%f20
-
-	mi2mst.ss	%f13,%f14,%f15
-	mi2mst.sd	%f17,%f18,%f19
-	mi2mst.dd	%f18,%f20,%f22
-
-	mrmt1s2.ss	%f14,%f15,%f16
-	mrmt1s2.sd	%f20,%f21,%f22
-	mrmt1s2.dd	%f20,%f22,%f24
-
-	mm12msm.ss	%f15,%f16,%f17
-	mm12msm.sd	%f23,%f24,%f25
-	mm12msm.dd	%f22,%f24,%f26
-
-	mrm1s2.ss	%f18,%f19,%f20
-	mrm1s2.sd	%f26,%f27,%f28
-	mrm1s2.dd	%f20,%f22,%f24
-
-	mm12ttsm.ss	%f19,%f20,%f21
-	mm12ttsm.sd	%f29,%f30,%f31
-	mm12ttsm.dd	%f22,%f24,%f26
-
-	mimt1s2.ss	%f20,%f21,%f22
-	mimt1s2.sd	%f0,%f1,%f2
-	mimt1s2.dd	%f24,%f26,%f28
-
-	mm12tsm.ss	%f21,%f22,%f23
-	mm12tsm.sd	%f3,%f4,%f5
-	mm12tsm.dd	%f30,%f0,%f2
-
-	mim1s2.ss	%f22,%f23,%f24
-	mim1s2.sd	%f6,%f7,%f8
-	mim1s2.dd	%f4,%f6,%f8
-
-	m12tsa.ss	%f23,%f24,%f25
-	m12tsa.sd	%f9,%f10,%f11
-	m12tsa.dd	%f6,%f8,%f10
-
-	# pfmsm with dual bit
-	d.mr2s1.ss	%f0,%f1,%f2
-	nop
-	d.mr2s1.sd	%f3,%f4,%f5
-	nop
-	d.mr2s1.dd	%f0,%f2,%f4
-	nop
-
-	d.mr2st.ss	%f1,%f2,%f3
-	nop
-	d.mr2st.sd	%f4,%f5,%f6
-	nop
-	d.mr2st.dd	%f2,%f4,%f6
-	nop
-
-	d.mr2ms1.ss	%f2,%f3,%f4
-	nop
-	d.mr2ms1.sd	%f6,%f7,%f8
-	nop
-	d.mr2ms1.dd	%f4,%f6,%f8
-	nop
-
-	d.mr2mst.ss	%f3,%f4,%f5
-	nop
-	d.mr2mst.sd	%f7,%f8,%f9
-	nop
-	d.mr2mst.dd	%f6,%f8,%f10
-	nop
-
-	d.mi2s1.ss	%f4,%f5,%f6
-	nop
-	d.mi2s1.sd	%f8,%f9,%f10
-	nop
-	d.mi2s1.dd	%f12,%f14,%f16
-	nop
-
-	d.mi2st.ss	%f7,%f8,%f9
-	nop
-	d.mi2st.sd	%f11,%f12,%f13
-	nop
-	d.mi2st.dd	%f14,%f16,%f18
-	nop
-
-	d.mi2ms1.ss	%f10,%f11,%f12
-	nop
-	d.mi2ms1.sd	%f14,%f15,%f16
-	nop
-	d.mi2ms1.dd	%f16,%f18,%f20
-	nop
-
-	d.mi2mst.ss	%f13,%f14,%f15
-	nop
-	d.mi2mst.sd	%f17,%f18,%f19
-	nop
-	d.mi2mst.dd	%f18,%f20,%f22
-	nop
-
-	d.mrmt1s2.ss	%f14,%f15,%f16
-	nop
-	d.mrmt1s2.sd	%f20,%f21,%f22
-	nop
-	d.mrmt1s2.dd	%f20,%f22,%f24
-	nop
-
-	d.mm12msm.ss	%f15,%f16,%f17
-	nop
-	d.mm12msm.sd	%f23,%f24,%f25
-	nop
-	d.mm12msm.dd	%f22,%f24,%f26
-	nop
-
-	d.mrm1s2.ss	%f18,%f19,%f20
-	nop
-	d.mrm1s2.sd	%f26,%f27,%f28
-	nop
-	d.mrm1s2.dd	%f20,%f22,%f24
-	nop
-
-	d.mm12ttsm.ss	%f19,%f20,%f21
-	nop
-	d.mm12ttsm.sd	%f29,%f30,%f31
-	nop
-	d.mm12ttsm.dd	%f22,%f24,%f26
-	nop
-
-	d.mimt1s2.ss	%f20,%f21,%f22
-	nop
-	d.mimt1s2.sd	%f0,%f1,%f2
-	nop
-	d.mimt1s2.dd	%f24,%f26,%f28
-	nop
-
-	d.mm12tsm.ss	%f21,%f22,%f23
-	nop
-	d.mm12tsm.sd	%f3,%f4,%f5
-	nop
-	d.mm12tsm.dd	%f30,%f0,%f2
-	nop
-
-	d.mim1s2.ss	%f22,%f23,%f24
-	nop
-	d.mim1s2.sd	%f6,%f7,%f8
-	nop
-	d.mim1s2.dd	%f4,%f6,%f8
-	nop
-
-	d.m12tsa.ss	%f23,%f24,%f25
-	nop
-	d.m12tsa.sd	%f9,%f10,%f11
-	nop
-	d.m12tsa.dd	%f6,%f8,%f10
-	nop
-
diff --git a/gas/testsuite/gas/i860/pfsm.d b/gas/testsuite/gas/i860/pfsm.d
deleted file mode 100644
index a3655cb..0000000
--- a/gas/testsuite/gas/i860/pfsm.d
+++ /dev/null
@@ -1,153 +0,0 @@
-#as:
-#objdump: -dr
-#name: i860 pfsm
-
-.*: +file format .*
-
-Disassembly of section \.text:
-
-00000000 <\.text>:
-   0:	10 04 22 48 	r2s1.ss	%f0,%f1,%f2
-   4:	90 1c 85 48 	r2s1.sd	%f3,%f4,%f5
-   8:	90 05 44 48 	r2s1.dd	%f0,%f2,%f4
-   c:	11 0c 43 48 	r2st.ss	%f1,%f2,%f3
-  10:	91 24 a6 48 	r2st.sd	%f4,%f5,%f6
-  14:	91 15 86 48 	r2st.dd	%f2,%f4,%f6
-  18:	12 14 64 48 	r2as1.ss	%f2,%f3,%f4
-  1c:	92 34 e8 48 	r2as1.sd	%f6,%f7,%f8
-  20:	92 25 c8 48 	r2as1.dd	%f4,%f6,%f8
-  24:	13 1c 85 48 	r2ast.ss	%f3,%f4,%f5
-  28:	93 3c 09 49 	r2ast.sd	%f7,%f8,%f9
-  2c:	93 35 0a 49 	r2ast.dd	%f6,%f8,%f10
-  30:	14 24 a6 48 	i2s1.ss	%f4,%f5,%f6
-  34:	94 44 2a 49 	i2s1.sd	%f8,%f9,%f10
-  38:	94 65 d0 49 	i2s1.dd	%f12,%f14,%f16
-  3c:	15 3c 09 49 	i2st.ss	%f7,%f8,%f9
-  40:	95 5c 8d 49 	i2st.sd	%f11,%f12,%f13
-  44:	95 75 12 4a 	i2st.dd	%f14,%f16,%f18
-  48:	16 54 6c 49 	i2as1.ss	%f10,%f11,%f12
-  4c:	96 74 f0 49 	i2as1.sd	%f14,%f15,%f16
-  50:	96 85 54 4a 	i2as1.dd	%f16,%f18,%f20
-  54:	17 6c cf 49 	i2ast.ss	%f13,%f14,%f15
-  58:	97 8c 53 4a 	i2ast.sd	%f17,%f18,%f19
-  5c:	97 95 96 4a 	i2ast.dd	%f18,%f20,%f22
-  60:	18 74 f0 49 	rat1s2.ss	%f14,%f15,%f16
-  64:	98 a4 b6 4a 	rat1s2.sd	%f20,%f21,%f22
-  68:	98 a5 d8 4a 	rat1s2.dd	%f20,%f22,%f24
-  6c:	19 7c 11 4a 	m12asm.ss	%f15,%f16,%f17
-  70:	99 bc 19 4b 	m12asm.sd	%f23,%f24,%f25
-  74:	99 b5 1a 4b 	m12asm.dd	%f22,%f24,%f26
-  78:	1a 94 74 4a 	ra1s2.ss	%f18,%f19,%f20
-  7c:	9a d4 7c 4b 	ra1s2.sd	%f26,%f27,%f28
-  80:	9a a5 d8 4a 	ra1s2.dd	%f20,%f22,%f24
-  84:	1b 9c 95 4a 	m12ttsa.ss	%f19,%f20,%f21
-  88:	9b ec df 4b 	m12ttsa.sd	%f29,%f30,%f31
-  8c:	9b b5 1a 4b 	m12ttsa.dd	%f22,%f24,%f26
-  90:	1c a4 b6 4a 	iat1s2.ss	%f20,%f21,%f22
-  94:	9c 04 22 48 	iat1s2.sd	%f0,%f1,%f2
-  98:	9c c5 5c 4b 	iat1s2.dd	%f24,%f26,%f28
-  9c:	1d ac d7 4a 	m12tsm.ss	%f21,%f22,%f23
-  a0:	9d 1c 85 48 	m12tsm.sd	%f3,%f4,%f5
-  a4:	9d f5 02 48 	m12tsm.dd	%f30,%f0,%f2
-  a8:	1e b4 f8 4a 	ia1s2.ss	%f22,%f23,%f24
-  ac:	9e 34 e8 48 	ia1s2.sd	%f6,%f7,%f8
-  b0:	9e 25 c8 48 	ia1s2.dd	%f4,%f6,%f8
-  b4:	1f bc 19 4b 	m12tsa.ss	%f23,%f24,%f25
-  b8:	9f 4c 4b 49 	m12tsa.sd	%f9,%f10,%f11
-  bc:	9f 35 0a 49 	m12tsa.dd	%f6,%f8,%f10
-  c0:	10 06 22 48 	d.r2s1.ss	%f0,%f1,%f2
-  c4:	00 00 00 a0 	shl	%r0,%r0,%r0
-  c8:	90 1e 85 48 	d.r2s1.sd	%f3,%f4,%f5
-  cc:	00 00 00 a0 	shl	%r0,%r0,%r0
-  d0:	90 07 44 48 	d.r2s1.dd	%f0,%f2,%f4
-  d4:	00 00 00 a0 	shl	%r0,%r0,%r0
-  d8:	11 0e 43 48 	d.r2st.ss	%f1,%f2,%f3
-  dc:	00 00 00 a0 	shl	%r0,%r0,%r0
-  e0:	91 26 a6 48 	d.r2st.sd	%f4,%f5,%f6
-  e4:	00 00 00 a0 	shl	%r0,%r0,%r0
-  e8:	91 17 86 48 	d.r2st.dd	%f2,%f4,%f6
-  ec:	00 00 00 a0 	shl	%r0,%r0,%r0
-  f0:	12 16 64 48 	d.r2as1.ss	%f2,%f3,%f4
-  f4:	00 00 00 a0 	shl	%r0,%r0,%r0
-  f8:	92 36 e8 48 	d.r2as1.sd	%f6,%f7,%f8
-  fc:	00 00 00 a0 	shl	%r0,%r0,%r0
- 100:	92 27 c8 48 	d.r2as1.dd	%f4,%f6,%f8
- 104:	00 00 00 a0 	shl	%r0,%r0,%r0
- 108:	13 1e 85 48 	d.r2ast.ss	%f3,%f4,%f5
- 10c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 110:	93 3e 09 49 	d.r2ast.sd	%f7,%f8,%f9
- 114:	00 00 00 a0 	shl	%r0,%r0,%r0
- 118:	93 37 0a 49 	d.r2ast.dd	%f6,%f8,%f10
- 11c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 120:	14 26 a6 48 	d.i2s1.ss	%f4,%f5,%f6
- 124:	00 00 00 a0 	shl	%r0,%r0,%r0
- 128:	94 46 2a 49 	d.i2s1.sd	%f8,%f9,%f10
- 12c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 130:	94 67 d0 49 	d.i2s1.dd	%f12,%f14,%f16
- 134:	00 00 00 a0 	shl	%r0,%r0,%r0
- 138:	15 3e 09 49 	d.i2st.ss	%f7,%f8,%f9
- 13c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 140:	95 5e 8d 49 	d.i2st.sd	%f11,%f12,%f13
- 144:	00 00 00 a0 	shl	%r0,%r0,%r0
- 148:	95 77 12 4a 	d.i2st.dd	%f14,%f16,%f18
- 14c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 150:	16 56 6c 49 	d.i2as1.ss	%f10,%f11,%f12
- 154:	00 00 00 a0 	shl	%r0,%r0,%r0
- 158:	96 76 f0 49 	d.i2as1.sd	%f14,%f15,%f16
- 15c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 160:	96 87 54 4a 	d.i2as1.dd	%f16,%f18,%f20
- 164:	00 00 00 a0 	shl	%r0,%r0,%r0
- 168:	17 6e cf 49 	d.i2ast.ss	%f13,%f14,%f15
- 16c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 170:	97 8e 53 4a 	d.i2ast.sd	%f17,%f18,%f19
- 174:	00 00 00 a0 	shl	%r0,%r0,%r0
- 178:	97 97 96 4a 	d.i2ast.dd	%f18,%f20,%f22
- 17c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 180:	18 76 f0 49 	d.rat1s2.ss	%f14,%f15,%f16
- 184:	00 00 00 a0 	shl	%r0,%r0,%r0
- 188:	98 a6 b6 4a 	d.rat1s2.sd	%f20,%f21,%f22
- 18c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 190:	98 a7 d8 4a 	d.rat1s2.dd	%f20,%f22,%f24
- 194:	00 00 00 a0 	shl	%r0,%r0,%r0
- 198:	19 7e 11 4a 	d.m12asm.ss	%f15,%f16,%f17
- 19c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1a0:	99 be 19 4b 	d.m12asm.sd	%f23,%f24,%f25
- 1a4:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1a8:	99 b7 1a 4b 	d.m12asm.dd	%f22,%f24,%f26
- 1ac:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1b0:	1a 96 74 4a 	d.ra1s2.ss	%f18,%f19,%f20
- 1b4:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1b8:	9a d6 7c 4b 	d.ra1s2.sd	%f26,%f27,%f28
- 1bc:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1c0:	9a a7 d8 4a 	d.ra1s2.dd	%f20,%f22,%f24
- 1c4:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1c8:	1b 9e 95 4a 	d.m12ttsa.ss	%f19,%f20,%f21
- 1cc:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1d0:	9b ee df 4b 	d.m12ttsa.sd	%f29,%f30,%f31
- 1d4:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1d8:	9b b7 1a 4b 	d.m12ttsa.dd	%f22,%f24,%f26
- 1dc:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1e0:	1c a6 b6 4a 	d.iat1s2.ss	%f20,%f21,%f22
- 1e4:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1e8:	9c 06 22 48 	d.iat1s2.sd	%f0,%f1,%f2
- 1ec:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1f0:	9c c7 5c 4b 	d.iat1s2.dd	%f24,%f26,%f28
- 1f4:	00 00 00 a0 	shl	%r0,%r0,%r0
- 1f8:	1d ae d7 4a 	d.m12tsm.ss	%f21,%f22,%f23
- 1fc:	00 00 00 a0 	shl	%r0,%r0,%r0
- 200:	9d 1e 85 48 	d.m12tsm.sd	%f3,%f4,%f5
- 204:	00 00 00 a0 	shl	%r0,%r0,%r0
- 208:	9d f7 02 48 	d.m12tsm.dd	%f30,%f0,%f2
- 20c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 210:	1e b6 f8 4a 	d.ia1s2.ss	%f22,%f23,%f24
- 214:	00 00 00 a0 	shl	%r0,%r0,%r0
- 218:	9e 36 e8 48 	d.ia1s2.sd	%f6,%f7,%f8
- 21c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 220:	9e 27 c8 48 	d.ia1s2.dd	%f4,%f6,%f8
- 224:	00 00 00 a0 	shl	%r0,%r0,%r0
- 228:	1f be 19 4b 	d.m12tsa.ss	%f23,%f24,%f25
- 22c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 230:	9f 4e 4b 49 	d.m12tsa.sd	%f9,%f10,%f11
- 234:	00 00 00 a0 	shl	%r0,%r0,%r0
- 238:	9f 37 0a 49 	d.m12tsa.dd	%f6,%f8,%f10
- 23c:	00 00 00 a0 	shl	%r0,%r0,%r0
diff --git a/gas/testsuite/gas/i860/pfsm.s b/gas/testsuite/gas/i860/pfsm.s
deleted file mode 100644
index 16ecd97..0000000
--- a/gas/testsuite/gas/i860/pfsm.s
+++ /dev/null
@@ -1,182 +0,0 @@
-# pfsm.p family (p={ss,sd,dd})
-
-	.text
-
-	# pfsm without dual bit
-	r2s1.ss	%f0,%f1,%f2
-	r2s1.sd	%f3,%f4,%f5
-	r2s1.dd	%f0,%f2,%f4
-
-	r2st.ss	%f1,%f2,%f3
-	r2st.sd	%f4,%f5,%f6
-	r2st.dd	%f2,%f4,%f6
-
-	r2as1.ss	%f2,%f3,%f4
-	r2as1.sd	%f6,%f7,%f8
-	r2as1.dd	%f4,%f6,%f8
-
-	r2ast.ss	%f3,%f4,%f5
-	r2ast.sd	%f7,%f8,%f9
-	r2ast.dd	%f6,%f8,%f10
-
-	i2s1.ss	%f4,%f5,%f6
-	i2s1.sd	%f8,%f9,%f10
-	i2s1.dd	%f12,%f14,%f16
-
-	i2st.ss	%f7,%f8,%f9
-	i2st.sd	%f11,%f12,%f13
-	i2st.dd	%f14,%f16,%f18
-
-	i2as1.ss	%f10,%f11,%f12
-	i2as1.sd	%f14,%f15,%f16
-	i2as1.dd	%f16,%f18,%f20
-
-	i2ast.ss	%f13,%f14,%f15
-	i2ast.sd	%f17,%f18,%f19
-	i2ast.dd	%f18,%f20,%f22
-
-	rat1s2.ss	%f14,%f15,%f16
-	rat1s2.sd	%f20,%f21,%f22
-	rat1s2.dd	%f20,%f22,%f24
-
-	m12asm.ss	%f15,%f16,%f17
-	m12asm.sd	%f23,%f24,%f25
-	m12asm.dd	%f22,%f24,%f26
-
-	ra1s2.ss	%f18,%f19,%f20
-	ra1s2.sd	%f26,%f27,%f28
-	ra1s2.dd	%f20,%f22,%f24
-
-	m12ttsa.ss	%f19,%f20,%f21
-	m12ttsa.sd	%f29,%f30,%f31
-	m12ttsa.dd	%f22,%f24,%f26
-
-	iat1s2.ss	%f20,%f21,%f22
-	iat1s2.sd	%f0,%f1,%f2
-	iat1s2.dd	%f24,%f26,%f28
-
-	m12tsm.ss	%f21,%f22,%f23
-	m12tsm.sd	%f3,%f4,%f5
-	m12tsm.dd	%f30,%f0,%f2
-
-	ia1s2.ss	%f22,%f23,%f24
-	ia1s2.sd	%f6,%f7,%f8
-	ia1s2.dd	%f4,%f6,%f8
-
-	m12tsa.ss	%f23,%f24,%f25
-	m12tsa.sd	%f9,%f10,%f11
-	m12tsa.dd	%f6,%f8,%f10
-
-	# pfsm with dual bit
-	d.r2s1.ss	%f0,%f1,%f2
-	nop
-	d.r2s1.sd	%f3,%f4,%f5
-	nop
-	d.r2s1.dd	%f0,%f2,%f4
-	nop
-
-	d.r2st.ss	%f1,%f2,%f3
-	nop
-	d.r2st.sd	%f4,%f5,%f6
-	nop
-	d.r2st.dd	%f2,%f4,%f6
-	nop
-
-	d.r2as1.ss	%f2,%f3,%f4
-	nop
-	d.r2as1.sd	%f6,%f7,%f8
-	nop
-	d.r2as1.dd	%f4,%f6,%f8
-	nop
-
-	d.r2ast.ss	%f3,%f4,%f5
-	nop
-	d.r2ast.sd	%f7,%f8,%f9
-	nop
-	d.r2ast.dd	%f6,%f8,%f10
-	nop
-
-	d.i2s1.ss	%f4,%f5,%f6
-	nop
-	d.i2s1.sd	%f8,%f9,%f10
-	nop
-	d.i2s1.dd	%f12,%f14,%f16
-	nop
-
-	d.i2st.ss	%f7,%f8,%f9
-	nop
-	d.i2st.sd	%f11,%f12,%f13
-	nop
-	d.i2st.dd	%f14,%f16,%f18
-	nop
-
-	d.i2as1.ss	%f10,%f11,%f12
-	nop
-	d.i2as1.sd	%f14,%f15,%f16
-	nop
-	d.i2as1.dd	%f16,%f18,%f20
-	nop
-
-	d.i2ast.ss	%f13,%f14,%f15
-	nop
-	d.i2ast.sd	%f17,%f18,%f19
-	nop
-	d.i2ast.dd	%f18,%f20,%f22
-	nop
-
-	d.rat1s2.ss	%f14,%f15,%f16
-	nop
-	d.rat1s2.sd	%f20,%f21,%f22
-	nop
-	d.rat1s2.dd	%f20,%f22,%f24
-	nop
-
-	d.m12asm.ss	%f15,%f16,%f17
-	nop
-	d.m12asm.sd	%f23,%f24,%f25
-	nop
-	d.m12asm.dd	%f22,%f24,%f26
-	nop
-
-	d.ra1s2.ss	%f18,%f19,%f20
-	nop
-	d.ra1s2.sd	%f26,%f27,%f28
-	nop
-	d.ra1s2.dd	%f20,%f22,%f24
-	nop
-
-	d.m12ttsa.ss	%f19,%f20,%f21
-	nop
-	d.m12ttsa.sd	%f29,%f30,%f31
-	nop
-	d.m12ttsa.dd	%f22,%f24,%f26
-	nop
-
-	d.iat1s2.ss	%f20,%f21,%f22
-	nop
-	d.iat1s2.sd	%f0,%f1,%f2
-	nop
-	d.iat1s2.dd	%f24,%f26,%f28
-	nop
-
-	d.m12tsm.ss	%f21,%f22,%f23
-	nop
-	d.m12tsm.sd	%f3,%f4,%f5
-	nop
-	d.m12tsm.dd	%f30,%f0,%f2
-	nop
-
-	d.ia1s2.ss	%f22,%f23,%f24
-	nop
-	d.ia1s2.sd	%f6,%f7,%f8
-	nop
-	d.ia1s2.dd	%f4,%f6,%f8
-	nop
-
-	d.m12tsa.ss	%f23,%f24,%f25
-	nop
-	d.m12tsa.sd	%f9,%f10,%f11
-	nop
-	d.m12tsa.dd	%f6,%f8,%f10
-	nop
-
diff --git a/gas/testsuite/gas/i860/pseudo-ops01.d b/gas/testsuite/gas/i860/pseudo-ops01.d
deleted file mode 100644
index 3131e2e..0000000
--- a/gas/testsuite/gas/i860/pseudo-ops01.d
+++ /dev/null
@@ -1,14 +0,0 @@
-#as:
-#objdump: -d
-#name: i860 pseudo-ops01
-
-.*: +file format .*
-
-Disassembly of section \.text:
-
-00000000 <\.text>:
-   0:	49 28 06 48 	fiadd\.ss	%f5,%f0,%f6
-   4:	c9 41 0a 48 	fiadd\.dd	%f8,%f0,%f10
-   8:	b3 18 14 48 	famov\.sd	%f3,%f20
-   c:	33 c1 09 48 	famov\.ds	%f24,%f9
-  10:	33 e5 03 48 	pfamov\.ds	%f28,%f3
diff --git a/gas/testsuite/gas/i860/pseudo-ops01.s b/gas/testsuite/gas/i860/pseudo-ops01.s
deleted file mode 100644
index 4b88925..0000000
--- a/gas/testsuite/gas/i860/pseudo-ops01.s
+++ /dev/null
@@ -1,10 +0,0 @@
-# Test some assembler pseudo-operations:
-# Floating point moves.
-
-	.text
-	fmov.ss		%f5,%f6
-	fmov.dd		%f8,%f10
-	fmov.sd		%f3,%f20
-	fmov.ds		%f24,%f9
-	pfmov.ds	%f28,%f3
-
diff --git a/gas/testsuite/gas/i860/regress01.d b/gas/testsuite/gas/i860/regress01.d
deleted file mode 100644
index 1ddfa4b..0000000
--- a/gas/testsuite/gas/i860/regress01.d
+++ /dev/null
@@ -1,21 +0,0 @@
-#as:
-#objdump: -dr
-#name: i860 regress01
-
-.*: +file format .*
-
-Disassembly of section \.text:
-
-00000000 <\.text>:
-   0:	f2 ff 50 2c 	fst.l	%f16,-16\(%sp\)
-   4:	f2 ff 54 2c 	fst.l	%f20,-16\(%sp\)
-   8:	f2 ff 58 2c 	fst.l	%f24,-16\(%sp\)
-   c:	f3 ff 50 2c 	fst.l	%f16,-16\(%sp\)\+\+
-  10:	f3 ff 54 2c 	fst.l	%f20,-16\(%sp\)\+\+
-  14:	f3 ff 58 2c 	fst.l	%f24,-16\(%sp\)\+\+
-  18:	f4 ff 50 2c 	fst.q	%f16,-16\(%sp\)
-  1c:	f4 ff 54 2c 	fst.q	%f20,-16\(%sp\)
-  20:	f4 ff 58 2c 	fst.q	%f24,-16\(%sp\)
-  24:	f5 ff 50 2c 	fst.q	%f16,-16\(%sp\)\+\+
-  28:	f5 ff 54 2c 	fst.q	%f20,-16\(%sp\)\+\+
-  2c:	f5 ff 58 2c 	fst.q	%f24,-16\(%sp\)\+\+
diff --git a/gas/testsuite/gas/i860/regress01.s b/gas/testsuite/gas/i860/regress01.s
deleted file mode 100644
index 002c3bd..0000000
--- a/gas/testsuite/gas/i860/regress01.s
+++ /dev/null
@@ -1,19 +0,0 @@
-# Test fst.* with and without auto-increment.
-
-	.text
-
-        fst.l   %f16,-16(%sp)
-        fst.l   %f20,-16(%sp)
-        fst.l   %f24,-16(%sp)
-
-        fst.l   %f16,-16(%sp)++
-        fst.l   %f20,-16(%sp)++
-        fst.l   %f24,-16(%sp)++
-
-        fst.q   %f16,-16(%sp)
-        fst.q   %f20,-16(%sp)
-        fst.q   %f24,-16(%sp)
-
-        fst.q   %f16,-16(%sp)++
-        fst.q   %f20,-16(%sp)++
-        fst.q   %f24,-16(%sp)++
diff --git a/gas/testsuite/gas/i860/shift.d b/gas/testsuite/gas/i860/shift.d
deleted file mode 100644
index e48ba16..0000000
--- a/gas/testsuite/gas/i860/shift.d
+++ /dev/null
@@ -1,86 +0,0 @@
-#as:
-#objdump: -dr
-#name: i860 shift
-
-.*: +file format .*
-
-Disassembly of section \.text:
-
-00000000 <\.text>:
-   0:	00 00 22 a0 	shl	%r0,%r1,%sp
-   4:	00 18 85 a0 	shl	%fp,%r4,%r5
-   8:	00 30 e8 a0 	shl	%r6,%r7,%r8
-   c:	00 48 4b a1 	shl	%r9,%r10,%r11
-  10:	00 f8 ae a1 	shl	%r31,%r13,%r14
-  14:	00 78 11 a2 	shl	%r15,%r16,%r17
-  18:	00 90 74 a2 	shl	%r18,%r19,%r20
-  1c:	00 a8 d7 a2 	shl	%r21,%r22,%r23
-  20:	00 c0 3f a3 	shl	%r24,%r25,%r31
-  24:	00 d8 9d a3 	shl	%r27,%r28,%r29
-  28:	00 f0 e0 a3 	shl	%r30,%r31,%r0
-  2c:	00 00 22 a8 	shr	%r0,%r1,%sp
-  30:	00 18 85 a8 	shr	%fp,%r4,%r5
-  34:	00 30 e8 a8 	shr	%r6,%r7,%r8
-  38:	00 48 4b a9 	shr	%r9,%r10,%r11
-  3c:	00 f8 ae a9 	shr	%r31,%r13,%r14
-  40:	00 78 11 aa 	shr	%r15,%r16,%r17
-  44:	00 90 74 aa 	shr	%r18,%r19,%r20
-  48:	00 a8 d7 aa 	shr	%r21,%r22,%r23
-  4c:	00 c0 3f ab 	shr	%r24,%r25,%r31
-  50:	00 d8 9d ab 	shr	%r27,%r28,%r29
-  54:	00 f0 e0 ab 	shr	%r30,%r31,%r0
-  58:	00 00 22 b8 	shra	%r0,%r1,%sp
-  5c:	00 18 85 b8 	shra	%fp,%r4,%r5
-  60:	00 30 e8 b8 	shra	%r6,%r7,%r8
-  64:	00 48 4b b9 	shra	%r9,%r10,%r11
-  68:	00 f8 ae b9 	shra	%r31,%r13,%r14
-  6c:	00 78 11 ba 	shra	%r15,%r16,%r17
-  70:	00 90 74 ba 	shra	%r18,%r19,%r20
-  74:	00 a8 d7 ba 	shra	%r21,%r22,%r23
-  78:	00 c0 3f bb 	shra	%r24,%r25,%r31
-  7c:	00 d8 9d bb 	shra	%r27,%r28,%r29
-  80:	00 f0 e0 bb 	shra	%r30,%r31,%r0
-  84:	00 00 22 b0 	shrd	%r0,%r1,%sp
-  88:	00 18 85 b0 	shrd	%fp,%r4,%r5
-  8c:	00 30 e8 b0 	shrd	%r6,%r7,%r8
-  90:	00 48 4b b1 	shrd	%r9,%r10,%r11
-  94:	00 f8 ae b1 	shrd	%r31,%r13,%r14
-  98:	00 78 11 b2 	shrd	%r15,%r16,%r17
-  9c:	00 90 74 b2 	shrd	%r18,%r19,%r20
-  a0:	00 a8 d7 b2 	shrd	%r21,%r22,%r23
-  a4:	00 c0 3f b3 	shrd	%r24,%r25,%r31
-  a8:	00 d8 9d b3 	shrd	%r27,%r28,%r29
-  ac:	00 f0 e0 b3 	shrd	%r30,%r31,%r0
-  b0:	00 00 22 a4 	shl	0,%r1,%sp
-  b4:	00 20 85 a4 	shl	8192,%r4,%r5
-  b8:	f5 13 e8 a4 	shl	5109,%r7,%r8
-  bc:	ff 7f 4b a5 	shl	32767,%r10,%r11
-  c0:	00 80 ae a5 	shl	-32768,%r13,%r14
-  c4:	00 e0 11 a6 	shl	-8192,%r16,%r17
-  c8:	ff ff 74 a6 	shl	-1,%r19,%r20
-  cc:	cd ab d7 a6 	shl	-21555,%r22,%r23
-  d0:	34 12 3a a7 	shl	4660,%r25,%r26
-  d4:	00 00 9d a7 	shl	0,%r28,%r29
-  d8:	03 00 e0 a7 	shl	3,%r31,%r0
-  dc:	00 00 22 ac 	shr	0,%r1,%sp
-  e0:	00 20 85 ac 	shr	8192,%r4,%r5
-  e4:	f5 13 e8 ac 	shr	5109,%r7,%r8
-  e8:	ff 7f 4b ad 	shr	32767,%r10,%r11
-  ec:	00 80 ae ad 	shr	-32768,%r13,%r14
-  f0:	00 e0 11 ae 	shr	-8192,%r16,%r17
-  f4:	ff ff 74 ae 	shr	-1,%r19,%r20
-  f8:	cd ab d7 ae 	shr	-21555,%r22,%r23
-  fc:	34 12 3a af 	shr	4660,%r25,%r26
- 100:	00 00 9d af 	shr	0,%r28,%r29
- 104:	03 00 e0 af 	shr	3,%r31,%r0
- 108:	01 00 22 bc 	shra	1,%r1,%sp
- 10c:	01 20 85 bc 	shra	8193,%r4,%r5
- 110:	f6 13 e8 bc 	shra	5110,%r7,%r8
- 114:	ff 7f 4b bd 	shra	32767,%r10,%r11
- 118:	00 80 ae bd 	shra	-32768,%r13,%r14
- 11c:	00 e0 11 be 	shra	-8192,%r16,%r17
- 120:	ff ff 74 be 	shra	-1,%r19,%r20
- 124:	cd ab d7 be 	shra	-21555,%r22,%r23
- 128:	34 12 3a bf 	shra	4660,%r25,%r26
- 12c:	00 00 9d bf 	shra	0,%r28,%r29
- 130:	03 00 e0 bf 	shra	3,%r31,%r0
diff --git a/gas/testsuite/gas/i860/shift.s b/gas/testsuite/gas/i860/shift.s
deleted file mode 100644
index 0d0d189..0000000
--- a/gas/testsuite/gas/i860/shift.s
+++ /dev/null
@@ -1,90 +0,0 @@
-# shl, shr, shra, shrd 
-
-	.text
-
-	# Register forms (all)
-	shl	%r0,%r1,%r2
-	shl	%r3,%r4,%r5
-	shl	%r6,%r7,%r8
-	shl	%r9,%r10,%r11
-	shl	%r31,%r13,%r14
-	shl	%r15,%r16,%r17
-	shl	%r18,%r19,%r20
-	shl	%r21,%r22,%r23
-	shl	%r24,%r25,%r31
-	shl	%r27,%r28,%r29
-	shl	%r30,%r31,%r0
-
-	shr	%r0,%r1,%r2
-	shr	%r3,%r4,%r5
-	shr	%r6,%r7,%r8
-	shr	%r9,%r10,%r11
-	shr	%r31,%r13,%r14
-	shr	%r15,%r16,%r17
-	shr	%r18,%r19,%r20
-	shr	%r21,%r22,%r23
-	shr	%r24,%r25,%r31
-	shr	%r27,%r28,%r29
-	shr	%r30,%r31,%r0
-
-	shra	%r0,%r1,%r2
-	shra	%r3,%r4,%r5
-	shra	%r6,%r7,%r8
-	shra	%r9,%r10,%r11
-	shra	%r31,%r13,%r14
-	shra	%r15,%r16,%r17
-	shra	%r18,%r19,%r20
-	shra	%r21,%r22,%r23
-	shra	%r24,%r25,%r31
-	shra	%r27,%r28,%r29
-	shra	%r30,%r31,%r0
-
-	shrd	%r0,%r1,%r2
-	shrd	%r3,%r4,%r5
-	shrd	%r6,%r7,%r8
-	shrd	%r9,%r10,%r11
-	shrd	%r31,%r13,%r14
-	shrd	%r15,%r16,%r17
-	shrd	%r18,%r19,%r20
-	shrd	%r21,%r22,%r23
-	shrd	%r24,%r25,%r31
-	shrd	%r27,%r28,%r29
-	shrd	%r30,%r31,%r0
-
-	# Immediate forms (shrd does not have an immediate form)
-	shl	0,%r1,%r2
-	shl	8192,%r4,%r5
-	shl	5109,%r7,%r8
-	shl	32767,%r10,%r11
-	shl	-32768,%r13,%r14
-	shl	-8192,%r16,%r17
-	shl	-1,%r19,%r20
-	shl	-21555,%r22,%r23
-	shl	0x1234,%r25,%r26
-	shl	0x0,%r28,%r29
-	shl	0x3,%r31,%r0
-
-	shr	0,%r1,%r2
-	shr	8192,%r4,%r5
-	shr	5109,%r7,%r8
-	shr	32767,%r10,%r11
-	shr	-32768,%r13,%r14
-	shr	-8192,%r16,%r17
-	shr	-1,%r19,%r20
-	shr	-21555,%r22,%r23
-	shr	0x1234,%r25,%r26
-	shr	0x0,%r28,%r29
-	shr	0x3,%r31,%r0
-
-	shra	1,%r1,%r2
-	shra	8193,%r4,%r5
-	shra	5110,%r7,%r8
-	shra	32767,%r10,%r11
-	shra	-32768,%r13,%r14
-	shra	-8192,%r16,%r17
-	shra	-1,%r19,%r20
-	shra	-21555,%r22,%r23
-	shra	0x1234,%r25,%r26
-	shra	0x0,%r28,%r29
-	shra	0x3,%r31,%r0
-
diff --git a/gas/testsuite/gas/i860/simd.d b/gas/testsuite/gas/i860/simd.d
deleted file mode 100644
index 2885196..0000000
--- a/gas/testsuite/gas/i860/simd.d
+++ /dev/null
@@ -1,105 +0,0 @@
-#as:
-#objdump: -dr
-#name: i860 simd
-
-.*: +file format .*
-
-Disassembly of section \.text:
-
-00000000 <\.text>:
-   0:	d7 05 48 48 	pfzchkl	%f0,%f2,%f8
-   4:	d7 15 90 48 	pfzchkl	%f2,%f4,%f16
-   8:	d7 25 cd 48 	pfzchkl	%f4,%f6,%f13
-   c:	d7 45 52 49 	pfzchkl	%f8,%f10,%f18
-  10:	df 65 de 49 	pfzchks	%f12,%f14,%f30
-  14:	df 85 54 4a 	pfzchks	%f16,%f18,%f20
-  18:	df a5 dc 4a 	pfzchks	%f20,%f22,%f28
-  1c:	df c5 5e 4b 	pfzchks	%f24,%f26,%f30
-  20:	d0 05 48 48 	pfaddp	%f0,%f2,%f8
-  24:	d0 15 90 48 	pfaddp	%f2,%f4,%f16
-  28:	d0 25 cd 48 	pfaddp	%f4,%f6,%f13
-  2c:	d0 45 52 49 	pfaddp	%f8,%f10,%f18
-  30:	d1 65 de 49 	pfaddz	%f12,%f14,%f30
-  34:	d1 85 54 4a 	pfaddz	%f16,%f18,%f20
-  38:	d1 a5 dc 4a 	pfaddz	%f20,%f22,%f28
-  3c:	d1 c5 5e 4b 	pfaddz	%f24,%f26,%f30
-  40:	d7 61 44 48 	fzchkl	%f12,%f2,%f4
-  44:	d7 b1 82 48 	fzchkl	%f22,%f4,%f2
-  48:	d7 21 d2 48 	fzchkl	%f4,%f6,%f18
-  4c:	d7 41 5c 49 	fzchkl	%f8,%f10,%f28
-  50:	df 61 c6 49 	fzchks	%f12,%f14,%f6
-  54:	df 81 54 4a 	fzchks	%f16,%f18,%f20
-  58:	df a1 dc 4a 	fzchks	%f20,%f22,%f28
-  5c:	df c1 5e 4b 	fzchks	%f24,%f26,%f30
-  60:	d0 61 44 48 	faddp	%f12,%f2,%f4
-  64:	d0 b1 82 48 	faddp	%f22,%f4,%f2
-  68:	d0 21 d2 48 	faddp	%f4,%f6,%f18
-  6c:	d0 41 5c 49 	faddp	%f8,%f10,%f28
-  70:	d1 61 c6 49 	faddz	%f12,%f14,%f6
-  74:	d1 81 54 4a 	faddz	%f16,%f18,%f20
-  78:	d1 a1 dc 4a 	faddz	%f20,%f22,%f28
-  7c:	d1 c1 5e 4b 	faddz	%f24,%f26,%f30
-  80:	d7 07 52 48 	d.pfzchkl	%f0,%f2,%f18
-  84:	00 00 00 a0 	shl	%r0,%r0,%r0
-  88:	d7 17 8c 48 	d.pfzchkl	%f2,%f4,%f12
-  8c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  90:	d7 27 de 48 	d.pfzchkl	%f4,%f6,%f30
-  94:	00 00 00 a0 	shl	%r0,%r0,%r0
-  98:	d7 47 44 49 	d.pfzchkl	%f8,%f10,%f4
-  9c:	00 00 00 a0 	shl	%r0,%r0,%r0
-  a0:	df 67 ce 49 	d.pfzchks	%f12,%f14,%f14
-  a4:	00 00 00 a0 	shl	%r0,%r0,%r0
-  a8:	df 87 46 4a 	d.pfzchks	%f16,%f18,%f6
-  ac:	00 00 00 a0 	shl	%r0,%r0,%r0
-  b0:	df a7 ca 4a 	d.pfzchks	%f20,%f22,%f10
-  b4:	00 00 00 a0 	shl	%r0,%r0,%r0
-  b8:	df c7 48 4b 	d.pfzchks	%f24,%f26,%f8
-  bc:	00 00 00 a0 	shl	%r0,%r0,%r0
-  c0:	d0 07 52 48 	d.pfaddp	%f0,%f2,%f18
-  c4:	00 00 00 a0 	shl	%r0,%r0,%r0
-  c8:	d0 17 80 48 	d.pfaddp	%f2,%f4,%f0
-  cc:	00 00 00 a0 	shl	%r0,%r0,%r0
-  d0:	d0 27 de 48 	d.pfaddp	%f4,%f6,%f30
-  d4:	00 00 00 a0 	shl	%r0,%r0,%r0
-  d8:	d0 47 44 49 	d.pfaddp	%f8,%f10,%f4
-  dc:	00 00 00 a0 	shl	%r0,%r0,%r0
-  e0:	d1 67 ce 49 	d.pfaddz	%f12,%f14,%f14
-  e4:	00 00 00 a0 	shl	%r0,%r0,%r0
-  e8:	d1 87 46 4a 	d.pfaddz	%f16,%f18,%f6
-  ec:	00 00 00 a0 	shl	%r0,%r0,%r0
-  f0:	d1 a7 ca 4a 	d.pfaddz	%f20,%f22,%f10
-  f4:	00 00 00 a0 	shl	%r0,%r0,%r0
-  f8:	d1 c7 48 4b 	d.pfaddz	%f24,%f26,%f8
-  fc:	00 00 00 a0 	shl	%r0,%r0,%r0
- 100:	d7 03 4a 48 	d.fzchkl	%f0,%f2,%f10
- 104:	00 00 00 a0 	shl	%r0,%r0,%r0
- 108:	d7 13 92 48 	d.fzchkl	%f2,%f4,%f18
- 10c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 110:	d7 23 cc 48 	d.fzchkl	%f4,%f6,%f12
- 114:	00 00 00 a0 	shl	%r0,%r0,%r0
- 118:	d7 43 4e 49 	d.fzchkl	%f8,%f10,%f14
- 11c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 120:	df 63 d0 49 	d.fzchks	%f12,%f14,%f16
- 124:	00 00 00 a0 	shl	%r0,%r0,%r0
- 128:	df 83 4c 4a 	d.fzchks	%f16,%f18,%f12
- 12c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 130:	df a3 d0 4a 	d.fzchks	%f20,%f22,%f16
- 134:	00 00 00 a0 	shl	%r0,%r0,%r0
- 138:	df c3 5e 4b 	d.fzchks	%f24,%f26,%f30
- 13c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 140:	d0 03 4a 48 	d.faddp	%f0,%f2,%f10
- 144:	00 00 00 a0 	shl	%r0,%r0,%r0
- 148:	d0 13 92 48 	d.faddp	%f2,%f4,%f18
- 14c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 150:	d0 23 cc 48 	d.faddp	%f4,%f6,%f12
- 154:	00 00 00 a0 	shl	%r0,%r0,%r0
- 158:	d0 43 4e 49 	d.faddp	%f8,%f10,%f14
- 15c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 160:	d1 63 d0 49 	d.faddz	%f12,%f14,%f16
- 164:	00 00 00 a0 	shl	%r0,%r0,%r0
- 168:	d1 83 4c 4a 	d.faddz	%f16,%f18,%f12
- 16c:	00 00 00 a0 	shl	%r0,%r0,%r0
- 170:	d1 a3 d0 4a 	d.faddz	%f20,%f22,%f16
- 174:	00 00 00 a0 	shl	%r0,%r0,%r0
- 178:	d1 c3 5e 4b 	d.faddz	%f24,%f26,%f30
- 17c:	00 00 00 a0 	shl	%r0,%r0,%r0
diff --git a/gas/testsuite/gas/i860/simd.s b/gas/testsuite/gas/i860/simd.s
deleted file mode 100644
index 4f252dd..0000000
--- a/gas/testsuite/gas/i860/simd.s
+++ /dev/null
@@ -1,119 +0,0 @@
-# fzchkl, fzchks, faddp, faddz
-
-	.text
-
-	# Pipelined, without dual bit
-	pfzchkl	%f0,%f2,%f8
-	pfzchkl	%f2,%f4,%f16
-	pfzchkl	%f4,%f6,%f13
-	pfzchkl	%f8,%f10,%f18
-
-	pfzchks	%f12,%f14,%f30
-	pfzchks	%f16,%f18,%f20
-	pfzchks	%f20,%f22,%f28
-	pfzchks	%f24,%f26,%f30
-
-	pfaddp	%f0,%f2,%f8
-	pfaddp	%f2,%f4,%f16
-	pfaddp	%f4,%f6,%f13
-	pfaddp	%f8,%f10,%f18
-
-	pfaddz	%f12,%f14,%f30
-	pfaddz	%f16,%f18,%f20
-	pfaddz	%f20,%f22,%f28
-	pfaddz	%f24,%f26,%f30
-
-	# Non-pipelined, without dual bit
-	fzchkl	%f12,%f2,%f4
-	fzchkl	%f22,%f4,%f2
-	fzchkl	%f4,%f6,%f18
-	fzchkl	%f8,%f10,%f28
-
-	fzchks	%f12,%f14,%f6
-	fzchks	%f16,%f18,%f20
-	fzchks	%f20,%f22,%f28
-	fzchks	%f24,%f26,%f30
-
-	faddp	%f12,%f2,%f4
-	faddp	%f22,%f4,%f2
-	faddp	%f4,%f6,%f18
-	faddp	%f8,%f10,%f28
-
-	faddz	%f12,%f14,%f6
-	faddz	%f16,%f18,%f20
-	faddz	%f20,%f22,%f28
-	faddz	%f24,%f26,%f30
-
-	# Pipelined, with dual bit
-	d.pfzchkl	%f0,%f2,%f18
-	nop
-	d.pfzchkl	%f2,%f4,%f12
-	nop
-	d.pfzchkl	%f4,%f6,%f30
-	nop
-	d.pfzchkl	%f8,%f10,%f4
-	nop
-
-	d.pfzchks	%f12,%f14,%f14
-	nop
-	d.pfzchks	%f16,%f18,%f6
-	nop
-	d.pfzchks	%f20,%f22,%f10
-	nop
-	d.pfzchks	%f24,%f26,%f8
-	nop
-
-	d.pfaddp	%f0,%f2,%f18
-	nop
-	d.pfaddp	%f2,%f4,%f0
-	nop
-	d.pfaddp	%f4,%f6,%f30
-	nop
-	d.pfaddp	%f8,%f10,%f4
-	nop
-
-	d.pfaddz	%f12,%f14,%f14
-	nop
-	d.pfaddz	%f16,%f18,%f6
-	nop
-	d.pfaddz	%f20,%f22,%f10
-	nop
-	d.pfaddz	%f24,%f26,%f8
-	nop
-
-	# Non-pipelined, with dual bit
-	d.fzchkl	%f0,%f2,%f10
-	nop
-	d.fzchkl	%f2,%f4,%f18
-	nop
-	d.fzchkl	%f4,%f6,%f12
-	nop
-	d.fzchkl	%f8,%f10,%f14
-	nop
-
-	d.fzchks	%f12,%f14,%f16
-	nop
-	d.fzchks	%f16,%f18,%f12
-	nop
-	d.fzchks	%f20,%f22,%f16
-	nop
-	d.fzchks	%f24,%f26,%f30
-	nop
-
-	d.faddp	%f0,%f2,%f10
-	nop
-	d.faddp	%f2,%f4,%f18
-	nop
-	d.faddp	%f4,%f6,%f12
-	nop
-	d.faddp	%f8,%f10,%f14
-	nop
-
-	d.faddz	%f12,%f14,%f16
-	nop
-	d.faddz	%f16,%f18,%f12
-	nop
-	d.faddz	%f20,%f22,%f16
-	nop
-	d.faddz	%f24,%f26,%f30
-	nop
diff --git a/gas/testsuite/gas/i860/system.d b/gas/testsuite/gas/i860/system.d
deleted file mode 100644
index a797961..0000000
--- a/gas/testsuite/gas/i860/system.d
+++ /dev/null
@@ -1,72 +0,0 @@
-#as:
-#objdump: -dr
-#name: i860 system
-
-.*: +file format .*
-
-Disassembly of section \.text:
-
-00000000 <\.text>:
-   0:	01 00 00 4c 	lock	
-   4:	07 00 00 4c 	unlock	
-   8:	04 00 00 4c 	intovr	
-   c:	00 00 00 44 	trap	%r0,%r0,%r0
-  10:	00 f8 ff 47 	trap	%r31,%r31,%r31
-  14:	00 08 b2 44 	trap	%r1,%r5,%r18
-  18:	00 f8 86 46 	trap	%r31,%r20,%r6
-  1c:	00 00 01 30 	ld.c	%fir,%r1
-  20:	00 00 1f 30 	ld.c	%fir,%r31
-  24:	00 00 25 30 	ld.c	%psr,%r5
-  28:	00 00 3e 30 	ld.c	%psr,%r30
-  2c:	00 00 4a 30 	ld.c	%dirbase,%r10
-  30:	00 00 42 30 	ld.c	%dirbase,%sp
-  34:	00 00 75 30 	ld.c	%db,%r21
-  38:	00 00 60 30 	ld.c	%db,%r0
-  3c:	00 00 9c 30 	ld.c	%fsr,%r28
-  40:	00 00 8c 30 	ld.c	%fsr,%r12
-  44:	00 00 bf 30 	ld.c	%epsr,%r31
-  48:	00 00 a6 30 	ld.c	%epsr,%r6
-  4c:	00 00 00 38 	st.c	%r0,%fir
-  50:	00 f0 00 38 	st.c	%r30,%fir
-  54:	00 38 20 38 	st.c	%r7,%psr
-  58:	00 f8 20 38 	st.c	%r31,%psr
-  5c:	00 58 40 38 	st.c	%r11,%dirbase
-  60:	00 18 40 38 	st.c	%fp,%dirbase
-  64:	00 b0 60 38 	st.c	%r22,%db
-  68:	00 78 60 38 	st.c	%r15,%db
-  6c:	00 e8 80 38 	st.c	%r29,%fsr
-  70:	00 68 80 38 	st.c	%r13,%fsr
-  74:	00 20 a0 38 	st.c	%r4,%epsr
-  78:	00 30 a0 38 	st.c	%r6,%epsr
-  7c:	04 00 00 34 	flush	0\(%r0\)
-  80:	84 00 20 34 	flush	128\(%r1\)
-  84:	04 01 40 34 	flush	256\(%sp\)
-  88:	04 02 60 34 	flush	512\(%fp\)
-  8c:	04 04 80 34 	flush	1024\(%r4\)
-  90:	04 10 a0 34 	flush	4096\(%r5\)
-  94:	04 20 c0 34 	flush	8192\(%r6\)
-  98:	04 40 e0 34 	flush	16384\(%r7\)
-  9c:	04 c0 00 35 	flush	-16384\(%r8\)
-  a0:	04 e0 20 35 	flush	-8192\(%r9\)
-  a4:	04 f0 40 35 	flush	-4096\(%r10\)
-  a8:	04 fc 60 35 	flush	-1024\(%r11\)
-  ac:	04 fe 80 35 	flush	-512\(%r12\)
-  b0:	0c ff a0 35 	flush	-248\(%r13\)
-  b4:	e4 ff c0 35 	flush	-32\(%r14\)
-  b8:	f4 ff c0 35 	flush	-16\(%r14\)
-  bc:	05 00 00 34 	flush	0\(%r0\)\+\+
-  c0:	85 00 20 34 	flush	128\(%r1\)\+\+
-  c4:	05 01 40 34 	flush	256\(%sp\)\+\+
-  c8:	05 02 60 34 	flush	512\(%fp\)\+\+
-  cc:	05 04 80 34 	flush	1024\(%r4\)\+\+
-  d0:	05 10 c0 36 	flush	4096\(%r22\)\+\+
-  d4:	05 20 e0 36 	flush	8192\(%r23\)\+\+
-  d8:	05 40 00 37 	flush	16384\(%r24\)\+\+
-  dc:	05 c0 20 37 	flush	-16384\(%r25\)\+\+
-  e0:	05 e0 40 37 	flush	-8192\(%r26\)\+\+
-  e4:	05 f0 60 37 	flush	-4096\(%r27\)\+\+
-  e8:	05 fc 80 37 	flush	-1024\(%r28\)\+\+
-  ec:	05 fe a0 37 	flush	-512\(%r29\)\+\+
-  f0:	0d ff c0 37 	flush	-248\(%r30\)\+\+
-  f4:	25 00 e0 37 	flush	32\(%r31\)\+\+
-  f8:	15 00 e0 37 	flush	16\(%r31\)\+\+
diff --git a/gas/testsuite/gas/i860/system.s b/gas/testsuite/gas/i860/system.s
deleted file mode 100644
index 62bcbfc..0000000
--- a/gas/testsuite/gas/i860/system.s
+++ /dev/null
@@ -1,76 +0,0 @@
-# System and privileged instructions
-# ld.c, st.c, flush, lock, unlock, intovr, trap
-
-	.text
-
-	lock
-	unlock
-	intovr
-
-	trap	%r0,%r0,%r0
-	trap	%r31,%r31,%r31
-	trap	%r1,%r5,%r18
-	trap	%r31,%r20,%r6
-
-	ld.c	%fir,%r1
-	ld.c	%fir,%r31
-	ld.c	%psr,%r5
-	ld.c	%psr,%r30
-	ld.c	%dirbase,%r10
-	ld.c	%dirbase,%r2
-	ld.c	%db,%r21
-	ld.c	%db,%r0
-	ld.c	%fsr,%r28
-	ld.c	%fsr,%r12
-	ld.c	%epsr,%r31
-	ld.c	%epsr,%r6
-
-	st.c	%r0,%fir
-	st.c	%r30,%fir
-	st.c	%r7,%psr
-	st.c	%r31,%psr
-	st.c	%r11,%dirbase
-	st.c	%r3,%dirbase
-	st.c	%r22,%db
-	st.c	%r15,%db
-	st.c	%r29,%fsr
-	st.c	%r13,%fsr
-	st.c	%r4,%epsr
-	st.c	%r6,%epsr
-
-	# Flush, no auto-increment.
-	flush	0(%r0)
-	flush	128(%r1)
-	flush	256(%r2)
-	flush	512(%r3)
-	flush	1024(%r4)
-	flush	4096(%r5)
-	flush	8192(%r6)
-	flush	16384(%r7)
-	flush	-16384(%r8)
-	flush	-8192(%r9)
-	flush	-4096(%r10)
-	flush	-1024(%r11)
-	flush	-512(%r12)
-	flush	-248(%r13)
-	flush	-32(%r14)
-	flush	-16(%r14)
-
-	# Flush, auto-increment.	
-	flush	0(%r0)++
-	flush	128(%r1)++
-	flush	256(%r2)++
-	flush	512(%r3)++
-	flush	1024(%r4)++
-	flush	4096(%r22)++
-	flush	8192(%r23)++
-	flush	16384(%r24)++
-	flush	-16384(%r25)++
-	flush	-8192(%r26)++
-	flush	-4096(%r27)++
-	flush	-1024(%r28)++
-	flush	-512(%r29)++
-	flush	-248(%r30)++
-	flush	32(%r31)++
-	flush	16(%r31)++
-
diff --git a/gas/testsuite/gas/i860/xp.d b/gas/testsuite/gas/i860/xp.d
deleted file mode 100644
index 6dad997..0000000
--- a/gas/testsuite/gas/i860/xp.d
+++ /dev/null
@@ -1,241 +0,0 @@
-#as: -mxp
-#objdump: -dr
-#name: i860 xp (XP-only instructions)
-
-.*: +file format .*
-
-Disassembly of section \.text:
-
-00000000 <\.text>:
-   0:	00 00 df 30 	ld.c	%bear,%r31
-   4:	00 00 c0 30 	ld.c	%bear,%r0
-   8:	00 00 e5 30 	ld.c	%ccr,%r5
-   c:	00 00 fe 30 	ld.c	%ccr,%r30
-  10:	00 00 0a 31 	ld.c	%p0,%r10
-  14:	00 00 02 31 	ld.c	%p0,%sp
-  18:	00 00 35 31 	ld.c	%p1,%r21
-  1c:	00 00 20 31 	ld.c	%p1,%r0
-  20:	00 00 5c 31 	ld.c	%p2,%r28
-  24:	00 00 4c 31 	ld.c	%p2,%r12
-  28:	00 00 7f 31 	ld.c	%p3,%r31
-  2c:	00 00 66 31 	ld.c	%p3,%r6
-  30:	00 00 c0 38 	st.c	%r0,%bear
-  34:	00 f0 c0 38 	st.c	%r30,%bear
-  38:	00 38 e0 38 	st.c	%r7,%ccr
-  3c:	00 f8 e0 38 	st.c	%r31,%ccr
-  40:	00 58 00 39 	st.c	%r11,%p0
-  44:	00 18 00 39 	st.c	%fp,%p0
-  48:	00 b0 20 39 	st.c	%r22,%p1
-  4c:	00 78 20 39 	st.c	%r15,%p1
-  50:	00 e8 40 39 	st.c	%r29,%p2
-  54:	00 68 40 39 	st.c	%r13,%p2
-  58:	00 20 60 39 	st.c	%r4,%p3
-  5c:	00 30 60 39 	st.c	%r6,%p3
-  60:	0a 04 05 4c 	ldint.l	%r0,%r5
-  64:	0a 04 df 4c 	ldint.l	%r6,%r31
-  68:	0a 04 fe 4c 	ldint.l	%r7,%r30
-  6c:	0a 04 1d 4d 	ldint.l	%r8,%r29
-  70:	0a 04 3c 4d 	ldint.l	%r9,%r28
-  74:	0a 04 1b 4c 	ldint.l	%r0,%r27
-  78:	0a 04 3a 4c 	ldint.l	%r1,%r26
-  7c:	0a 04 99 4d 	ldint.l	%r12,%r25
-  80:	0a 04 b8 4d 	ldint.l	%r13,%r24
-  84:	0a 04 d7 4d 	ldint.l	%r14,%r23
-  88:	0a 04 f6 4d 	ldint.l	%r15,%r22
-  8c:	0a 04 15 4e 	ldint.l	%r16,%r21
-  90:	0a 04 34 4e 	ldint.l	%r17,%r20
-  94:	0a 04 93 4f 	ldint.l	%r28,%r19
-  98:	0a 04 f2 4f 	ldint.l	%r31,%r18
-  9c:	0a 02 05 4c 	ldint.s	%r0,%r5
-  a0:	0a 02 df 4c 	ldint.s	%r6,%r31
-  a4:	0a 02 fe 4c 	ldint.s	%r7,%r30
-  a8:	0a 02 1d 4d 	ldint.s	%r8,%r29
-  ac:	0a 02 3c 4d 	ldint.s	%r9,%r28
-  b0:	0a 02 1b 4c 	ldint.s	%r0,%r27
-  b4:	0a 02 3a 4c 	ldint.s	%r1,%r26
-  b8:	0a 02 99 4d 	ldint.s	%r12,%r25
-  bc:	0a 02 b8 4d 	ldint.s	%r13,%r24
-  c0:	0a 02 d7 4d 	ldint.s	%r14,%r23
-  c4:	0a 02 f6 4d 	ldint.s	%r15,%r22
-  c8:	0a 02 15 4e 	ldint.s	%r16,%r21
-  cc:	0a 02 34 4e 	ldint.s	%r17,%r20
-  d0:	0a 02 93 4f 	ldint.s	%r28,%r19
-  d4:	0a 02 f2 4f 	ldint.s	%r31,%r18
-  d8:	0a 00 05 4c 	ldint.b	%r0,%r5
-  dc:	0a 00 df 4c 	ldint.b	%r6,%r31
-  e0:	0a 00 fe 4c 	ldint.b	%r7,%r30
-  e4:	0a 00 1d 4d 	ldint.b	%r8,%r29
-  e8:	0a 00 3c 4d 	ldint.b	%r9,%r28
-  ec:	0a 00 1b 4c 	ldint.b	%r0,%r27
-  f0:	0a 00 3a 4c 	ldint.b	%r1,%r26
-  f4:	0a 00 99 4d 	ldint.b	%r12,%r25
-  f8:	0a 00 b8 4d 	ldint.b	%r13,%r24
-  fc:	0a 00 d7 4d 	ldint.b	%r14,%r23
- 100:	0a 00 f6 4d 	ldint.b	%r15,%r22
- 104:	0a 00 15 4e 	ldint.b	%r16,%r21
- 108:	0a 00 34 4e 	ldint.b	%r17,%r20
- 10c:	0a 00 93 4f 	ldint.b	%r28,%r19
- 110:	0a 00 f2 4f 	ldint.b	%r31,%r18
- 114:	08 04 05 4c 	ldio.l	%r0,%r5
- 118:	08 04 df 4c 	ldio.l	%r6,%r31
- 11c:	08 04 fe 4c 	ldio.l	%r7,%r30
- 120:	08 04 1d 4d 	ldio.l	%r8,%r29
- 124:	08 04 3c 4d 	ldio.l	%r9,%r28
- 128:	08 04 1b 4c 	ldio.l	%r0,%r27
- 12c:	08 04 3a 4c 	ldio.l	%r1,%r26
- 130:	08 04 99 4d 	ldio.l	%r12,%r25
- 134:	08 04 b8 4d 	ldio.l	%r13,%r24
- 138:	08 04 d7 4d 	ldio.l	%r14,%r23
- 13c:	08 04 f6 4d 	ldio.l	%r15,%r22
- 140:	08 04 15 4e 	ldio.l	%r16,%r21
- 144:	08 04 34 4e 	ldio.l	%r17,%r20
- 148:	08 04 93 4f 	ldio.l	%r28,%r19
- 14c:	08 04 f2 4f 	ldio.l	%r31,%r18
- 150:	08 02 05 4c 	ldio.s	%r0,%r5
- 154:	08 02 df 4c 	ldio.s	%r6,%r31
- 158:	08 02 fe 4c 	ldio.s	%r7,%r30
- 15c:	08 02 1d 4d 	ldio.s	%r8,%r29
- 160:	08 02 3c 4d 	ldio.s	%r9,%r28
- 164:	08 02 1b 4c 	ldio.s	%r0,%r27
- 168:	08 02 3a 4c 	ldio.s	%r1,%r26
- 16c:	08 02 99 4d 	ldio.s	%r12,%r25
- 170:	08 02 b8 4d 	ldio.s	%r13,%r24
- 174:	08 02 d7 4d 	ldio.s	%r14,%r23
- 178:	08 02 f6 4d 	ldio.s	%r15,%r22
- 17c:	08 02 15 4e 	ldio.s	%r16,%r21
- 180:	08 02 34 4e 	ldio.s	%r17,%r20
- 184:	08 02 93 4f 	ldio.s	%r28,%r19
- 188:	08 02 f2 4f 	ldio.s	%r31,%r18
- 18c:	08 00 05 4c 	ldio.b	%r0,%r5
- 190:	08 00 df 4c 	ldio.b	%r6,%r31
- 194:	08 00 fe 4c 	ldio.b	%r7,%r30
- 198:	08 00 1d 4d 	ldio.b	%r8,%r29
- 19c:	08 00 3c 4d 	ldio.b	%r9,%r28
- 1a0:	08 00 1b 4c 	ldio.b	%r0,%r27
- 1a4:	08 00 3a 4c 	ldio.b	%r1,%r26
- 1a8:	08 00 99 4d 	ldio.b	%r12,%r25
- 1ac:	08 00 b8 4d 	ldio.b	%r13,%r24
- 1b0:	08 00 d7 4d 	ldio.b	%r14,%r23
- 1b4:	08 00 f6 4d 	ldio.b	%r15,%r22
- 1b8:	08 00 15 4e 	ldio.b	%r16,%r21
- 1bc:	08 00 34 4e 	ldio.b	%r17,%r20
- 1c0:	08 00 93 4f 	ldio.b	%r28,%r19
- 1c4:	08 00 f2 4f 	ldio.b	%r31,%r18
- 1c8:	09 04 a0 4c 	stio.l	%r0,%r5
- 1cc:	09 34 e0 4f 	stio.l	%r6,%r31
- 1d0:	09 3c c0 4f 	stio.l	%r7,%r30
- 1d4:	09 44 a0 4f 	stio.l	%r8,%r29
- 1d8:	09 4c 80 4f 	stio.l	%r9,%r28
- 1dc:	09 04 60 4f 	stio.l	%r0,%r27
- 1e0:	09 0c 40 4f 	stio.l	%r1,%r26
- 1e4:	09 64 20 4f 	stio.l	%r12,%r25
- 1e8:	09 6c 00 4f 	stio.l	%r13,%r24
- 1ec:	09 74 e0 4e 	stio.l	%r14,%r23
- 1f0:	09 7c c0 4e 	stio.l	%r15,%r22
- 1f4:	09 84 a0 4e 	stio.l	%r16,%r21
- 1f8:	09 8c 80 4e 	stio.l	%r17,%r20
- 1fc:	09 e4 60 4e 	stio.l	%r28,%r19
- 200:	09 fc 40 4e 	stio.l	%r31,%r18
- 204:	09 02 a0 4c 	stio.s	%r0,%r5
- 208:	09 32 e0 4f 	stio.s	%r6,%r31
- 20c:	09 3a c0 4f 	stio.s	%r7,%r30
- 210:	09 42 a0 4f 	stio.s	%r8,%r29
- 214:	09 4a 80 4f 	stio.s	%r9,%r28
- 218:	09 02 60 4f 	stio.s	%r0,%r27
- 21c:	09 0a 40 4f 	stio.s	%r1,%r26
- 220:	09 62 20 4f 	stio.s	%r12,%r25
- 224:	09 6a 00 4f 	stio.s	%r13,%r24
- 228:	09 72 e0 4e 	stio.s	%r14,%r23
- 22c:	09 7a c0 4e 	stio.s	%r15,%r22
- 230:	09 82 a0 4e 	stio.s	%r16,%r21
- 234:	09 8a 80 4e 	stio.s	%r17,%r20
- 238:	09 e2 60 4e 	stio.s	%r28,%r19
- 23c:	09 fa 40 4e 	stio.s	%r31,%r18
- 240:	09 00 a0 4c 	stio.b	%r0,%r5
- 244:	09 30 e0 4f 	stio.b	%r6,%r31
- 248:	09 38 c0 4f 	stio.b	%r7,%r30
- 24c:	09 40 a0 4f 	stio.b	%r8,%r29
- 250:	09 48 80 4f 	stio.b	%r9,%r28
- 254:	09 00 60 4f 	stio.b	%r0,%r27
- 258:	09 08 40 4f 	stio.b	%r1,%r26
- 25c:	09 60 20 4f 	stio.b	%r12,%r25
- 260:	09 68 00 4f 	stio.b	%r13,%r24
- 264:	09 70 e0 4e 	stio.b	%r14,%r23
- 268:	09 78 c0 4e 	stio.b	%r15,%r22
- 26c:	09 80 a0 4e 	stio.b	%r16,%r21
- 270:	09 88 80 4e 	stio.b	%r17,%r20
- 274:	09 e0 60 4e 	stio.b	%r28,%r19
- 278:	09 f8 40 4e 	stio.b	%r31,%r18
- 27c:	0b 00 00 4c 	scyc.b	%r0
- 280:	0b 00 a0 4c 	scyc.b	%r5
- 284:	0b 00 c0 4c 	scyc.b	%r6
- 288:	0b 00 a0 4d 	scyc.b	%r13
- 28c:	0b 00 c0 4d 	scyc.b	%r14
- 290:	0b 00 80 4f 	scyc.b	%r28
- 294:	0b 00 a0 4f 	scyc.b	%r29
- 298:	0b 00 c0 4f 	scyc.b	%r30
- 29c:	0b 00 e0 4f 	scyc.b	%r31
- 2a0:	04 00 00 64 	pfld.q	0\(%r0\),%f0
- 2a4:	84 00 3c 64 	pfld.q	128\(%r1\),%f28
- 2a8:	04 01 58 64 	pfld.q	256\(%sp\),%f24
- 2ac:	04 02 74 64 	pfld.q	512\(%fp\),%f20
- 2b0:	04 04 90 64 	pfld.q	1024\(%r4\),%f16
- 2b4:	04 10 ac 64 	pfld.q	4096\(%r5\),%f12
- 2b8:	04 20 c8 64 	pfld.q	8192\(%r6\),%f8
- 2bc:	04 40 e4 64 	pfld.q	16384\(%r7\),%f4
- 2c0:	fc 7f e0 64 	pfld.q	32760\(%r7\),%f0
- 2c4:	04 80 fc 64 	pfld.q	-32768\(%r7\),%f28
- 2c8:	04 c0 18 65 	pfld.q	-16384\(%r8\),%f24
- 2cc:	04 e0 34 65 	pfld.q	-8192\(%r9\),%f20
- 2d0:	04 f0 50 65 	pfld.q	-4096\(%r10\),%f16
- 2d4:	04 fc 6c 65 	pfld.q	-1024\(%r11\),%f12
- 2d8:	04 fe 88 65 	pfld.q	-512\(%r12\),%f8
- 2dc:	0c ff a4 65 	pfld.q	-248\(%r13\),%f4
- 2e0:	fc ff c0 65 	pfld.q	-8\(%r14\),%f0
- 2e4:	05 00 00 64 	pfld.q	0\(%r0\)\+\+,%f0
- 2e8:	85 00 24 64 	pfld.q	128\(%r1\)\+\+,%f4
- 2ec:	05 01 48 64 	pfld.q	256\(%sp\)\+\+,%f8
- 2f0:	05 02 6c 64 	pfld.q	512\(%fp\)\+\+,%f12
- 2f4:	05 04 90 64 	pfld.q	1024\(%r4\)\+\+,%f16
- 2f8:	05 10 b4 64 	pfld.q	4096\(%r5\)\+\+,%f20
- 2fc:	05 20 d8 64 	pfld.q	8192\(%r6\)\+\+,%f24
- 300:	05 40 fc 64 	pfld.q	16384\(%r7\)\+\+,%f28
- 304:	fd 7f e0 64 	pfld.q	32760\(%r7\)\+\+,%f0
- 308:	05 80 e4 64 	pfld.q	-32768\(%r7\)\+\+,%f4
- 30c:	05 c0 08 65 	pfld.q	-16384\(%r8\)\+\+,%f8
- 310:	05 e0 2c 65 	pfld.q	-8192\(%r9\)\+\+,%f12
- 314:	05 f0 50 65 	pfld.q	-4096\(%r10\)\+\+,%f16
- 318:	05 fc 74 65 	pfld.q	-1024\(%r11\)\+\+,%f20
- 31c:	05 fe 98 65 	pfld.q	-512\(%r12\)\+\+,%f24
- 320:	0d ff bc 65 	pfld.q	-248\(%r13\)\+\+,%f28
- 324:	fd ff d0 65 	pfld.q	-8\(%r14\)\+\+,%f16
- 328:	04 28 1c 60 	pfld.q	%r5\(%r0\),%f28
- 32c:	04 30 38 60 	pfld.q	%r6\(%r1\),%f24
- 330:	04 38 54 60 	pfld.q	%r7\(%sp\),%f20
- 334:	04 40 70 60 	pfld.q	%r8\(%fp\),%f16
- 338:	04 48 8c 60 	pfld.q	%r9\(%r4\),%f12
- 33c:	04 00 a8 60 	pfld.q	%r0\(%r5\),%f8
- 340:	04 08 c4 60 	pfld.q	%r1\(%r6\),%f4
- 344:	04 60 e0 60 	pfld.q	%r12\(%r7\),%f0
- 348:	04 68 1c 61 	pfld.q	%r13\(%r8\),%f28
- 34c:	04 70 38 61 	pfld.q	%r14\(%r9\),%f24
- 350:	04 78 54 61 	pfld.q	%r15\(%r10\),%f20
- 354:	04 80 70 61 	pfld.q	%r16\(%r11\),%f16
- 358:	04 88 8c 61 	pfld.q	%r17\(%r12\),%f12
- 35c:	04 e0 a8 61 	pfld.q	%r28\(%r13\),%f8
- 360:	04 f8 c4 61 	pfld.q	%r31\(%r14\),%f4
- 364:	05 28 00 60 	pfld.q	%r5\(%r0\)\+\+,%f0
- 368:	05 30 24 60 	pfld.q	%r6\(%r1\)\+\+,%f4
- 36c:	05 38 48 60 	pfld.q	%r7\(%sp\)\+\+,%f8
- 370:	05 40 6c 60 	pfld.q	%r8\(%fp\)\+\+,%f12
- 374:	05 48 90 60 	pfld.q	%r9\(%r4\)\+\+,%f16
- 378:	05 00 b4 60 	pfld.q	%r0\(%r5\)\+\+,%f20
- 37c:	05 08 d8 60 	pfld.q	%r1\(%r6\)\+\+,%f24
- 380:	05 60 fc 60 	pfld.q	%r12\(%r7\)\+\+,%f28
- 384:	05 68 00 61 	pfld.q	%r13\(%r8\)\+\+,%f0
- 388:	05 70 24 61 	pfld.q	%r14\(%r9\)\+\+,%f4
- 38c:	05 78 48 61 	pfld.q	%r15\(%r10\)\+\+,%f8
- 390:	05 80 6c 61 	pfld.q	%r16\(%r11\)\+\+,%f12
- 394:	05 88 90 61 	pfld.q	%r17\(%r12\)\+\+,%f16
- 398:	05 e0 b4 61 	pfld.q	%r28\(%r13\)\+\+,%f20
- 39c:	05 f8 d8 61 	pfld.q	%r31\(%r14\)\+\+,%f24
diff --git a/gas/testsuite/gas/i860/xp.s b/gas/testsuite/gas/i860/xp.s
deleted file mode 100644
index 406c8f0..0000000
--- a/gas/testsuite/gas/i860/xp.s
+++ /dev/null
@@ -1,266 +0,0 @@
-# This tests the XP-only instructions:
-#  ldint.x, ldio.x, stio.x, scyc.b, pfld.q
-# And control registers:
-#  %bear, %ccr, %p0, %p1, %p2, %p3
-
-	.text
-
-	# XP-only control registers
-	ld.c	%bear,%r31
-	ld.c	%bear,%r0
-	ld.c	%ccr,%r5
-	ld.c	%ccr,%r30
-	ld.c	%p0,%r10
-	ld.c	%p0,%r2
-	ld.c	%p1,%r21
-	ld.c	%p1,%r0
-	ld.c	%p2,%r28
-	ld.c	%p2,%r12
-	ld.c	%p3,%r31
-	ld.c	%p3,%r6
-
-	st.c	%r0,%bear
-	st.c	%r30,%bear
-	st.c	%r7,%ccr
-	st.c	%r31,%ccr
-	st.c	%r11,%p0
-	st.c	%r3,%p0
-	st.c	%r22,%p1
-	st.c	%r15,%p1
-	st.c	%r29,%p2
-	st.c	%r13,%p2
-	st.c	%r4,%p3
-	st.c	%r6,%p3
-
-	# ldint.{s,b,l}
-	ldint.l	%r0,%r5
-	ldint.l	%r6,%r31
-	ldint.l	%r7,%r30
-	ldint.l	%r8,%r29
-	ldint.l	%r9,%r28
-	ldint.l	%r0,%r27
-	ldint.l	%r1,%r26
-	ldint.l	%r12,%r25
-	ldint.l	%r13,%r24
-	ldint.l	%r14,%r23
-	ldint.l	%r15,%r22
-	ldint.l	%r16,%r21
-	ldint.l	%r17,%r20
-	ldint.l	%r28,%r19
-	ldint.l	%r31,%r18
-
-	ldint.s	%r0,%r5
-	ldint.s	%r6,%r31
-	ldint.s	%r7,%r30
-	ldint.s	%r8,%r29
-	ldint.s	%r9,%r28
-	ldint.s	%r0,%r27
-	ldint.s	%r1,%r26
-	ldint.s	%r12,%r25
-	ldint.s	%r13,%r24
-	ldint.s	%r14,%r23
-	ldint.s	%r15,%r22
-	ldint.s	%r16,%r21
-	ldint.s	%r17,%r20
-	ldint.s	%r28,%r19
-	ldint.s	%r31,%r18
-
-	ldint.b	%r0,%r5
-	ldint.b	%r6,%r31
-	ldint.b	%r7,%r30
-	ldint.b	%r8,%r29
-	ldint.b	%r9,%r28
-	ldint.b	%r0,%r27
-	ldint.b	%r1,%r26
-	ldint.b	%r12,%r25
-	ldint.b	%r13,%r24
-	ldint.b	%r14,%r23
-	ldint.b	%r15,%r22
-	ldint.b	%r16,%r21
-	ldint.b	%r17,%r20
-	ldint.b	%r28,%r19
-	ldint.b	%r31,%r18
-
-	# ldio.{s,b,l}
-	ldio.l	%r0,%r5
-	ldio.l	%r6,%r31
-	ldio.l	%r7,%r30
-	ldio.l	%r8,%r29
-	ldio.l	%r9,%r28
-	ldio.l	%r0,%r27
-	ldio.l	%r1,%r26
-	ldio.l	%r12,%r25
-	ldio.l	%r13,%r24
-	ldio.l	%r14,%r23
-	ldio.l	%r15,%r22
-	ldio.l	%r16,%r21
-	ldio.l	%r17,%r20
-	ldio.l	%r28,%r19
-	ldio.l	%r31,%r18
-
-	ldio.s	%r0,%r5
-	ldio.s	%r6,%r31
-	ldio.s	%r7,%r30
-	ldio.s	%r8,%r29
-	ldio.s	%r9,%r28
-	ldio.s	%r0,%r27
-	ldio.s	%r1,%r26
-	ldio.s	%r12,%r25
-	ldio.s	%r13,%r24
-	ldio.s	%r14,%r23
-	ldio.s	%r15,%r22
-	ldio.s	%r16,%r21
-	ldio.s	%r17,%r20
-	ldio.s	%r28,%r19
-	ldio.s	%r31,%r18
-
-	ldio.b	%r0,%r5
-	ldio.b	%r6,%r31
-	ldio.b	%r7,%r30
-	ldio.b	%r8,%r29
-	ldio.b	%r9,%r28
-	ldio.b	%r0,%r27
-	ldio.b	%r1,%r26
-	ldio.b	%r12,%r25
-	ldio.b	%r13,%r24
-	ldio.b	%r14,%r23
-	ldio.b	%r15,%r22
-	ldio.b	%r16,%r21
-	ldio.b	%r17,%r20
-	ldio.b	%r28,%r19
-	ldio.b	%r31,%r18
-
-	# stio.{s,b,l}
-	stio.l	%r0,%r5
-	stio.l	%r6,%r31
-	stio.l	%r7,%r30
-	stio.l	%r8,%r29
-	stio.l	%r9,%r28
-	stio.l	%r0,%r27
-	stio.l	%r1,%r26
-	stio.l	%r12,%r25
-	stio.l	%r13,%r24
-	stio.l	%r14,%r23
-	stio.l	%r15,%r22
-	stio.l	%r16,%r21
-	stio.l	%r17,%r20
-	stio.l	%r28,%r19
-	stio.l	%r31,%r18
-
-	stio.s	%r0,%r5
-	stio.s	%r6,%r31
-	stio.s	%r7,%r30
-	stio.s	%r8,%r29
-	stio.s	%r9,%r28
-	stio.s	%r0,%r27
-	stio.s	%r1,%r26
-	stio.s	%r12,%r25
-	stio.s	%r13,%r24
-	stio.s	%r14,%r23
-	stio.s	%r15,%r22
-	stio.s	%r16,%r21
-	stio.s	%r17,%r20
-	stio.s	%r28,%r19
-	stio.s	%r31,%r18
-
-	stio.b	%r0,%r5
-	stio.b	%r6,%r31
-	stio.b	%r7,%r30
-	stio.b	%r8,%r29
-	stio.b	%r9,%r28
-	stio.b	%r0,%r27
-	stio.b	%r1,%r26
-	stio.b	%r12,%r25
-	stio.b	%r13,%r24
-	stio.b	%r14,%r23
-	stio.b	%r15,%r22
-	stio.b	%r16,%r21
-	stio.b	%r17,%r20
-	stio.b	%r28,%r19
-	stio.b	%r31,%r18
-
-	# scyc.b
-	scyc.b	%r0
-	scyc.b	%r5
-	scyc.b	%r6
-	scyc.b	%r13
-	scyc.b	%r14
-	scyc.b	%r28
-	scyc.b	%r29
-	scyc.b	%r30
-	scyc.b	%r31
-
-	# pfld.q
-	# Immediate form, no auto-increment.
-	pfld.q	0(%r0),%f0
-	pfld.q	128(%r1),%f28
-	pfld.q	256(%r2),%f24
-	pfld.q	512(%r3),%f20
-	pfld.q	1024(%r4),%f16
-	pfld.q	4096(%r5),%f12
-	pfld.q	8192(%r6),%f8
-	pfld.q	16384(%r7),%f4
-	pfld.q	32760(%r7),%f0
-	pfld.q	-32768(%r7),%f28
-	pfld.q	-16384(%r8),%f24
-	pfld.q	-8192(%r9),%f20
-	pfld.q	-4096(%r10),%f16
-	pfld.q	-1024(%r11),%f12
-	pfld.q	-512(%r12),%f8
-	pfld.q	-248(%r13),%f4
-	pfld.q	-8(%r14),%f0
-
-	# Immediate form, with auto-increment.
-	pfld.q	0(%r0)++,%f0
-	pfld.q	128(%r1)++,%f4
-	pfld.q	256(%r2)++,%f8
-	pfld.q	512(%r3)++,%f12
-	pfld.q	1024(%r4)++,%f16
-	pfld.q	4096(%r5)++,%f20
-	pfld.q	8192(%r6)++,%f24
-	pfld.q	16384(%r7)++,%f28
-	pfld.q	32760(%r7)++,%f0
-	pfld.q	-32768(%r7)++,%f4
-	pfld.q	-16384(%r8)++,%f8
-	pfld.q	-8192(%r9)++,%f12
-	pfld.q	-4096(%r10)++,%f16
-	pfld.q	-1024(%r11)++,%f20
-	pfld.q	-512(%r12)++,%f24
-	pfld.q	-248(%r13)++,%f28
-	pfld.q	-8(%r14)++,%f16
-
-	# Index form, no auto-increment.
-	pfld.q	%r5(%r0),%f28
-	pfld.q	%r6(%r1),%f24
-	pfld.q	%r7(%r2),%f20
-	pfld.q	%r8(%r3),%f16
-	pfld.q	%r9(%r4),%f12
-	pfld.q	%r0(%r5),%f8
-	pfld.q	%r1(%r6),%f4
-	pfld.q	%r12(%r7),%f0
-	pfld.q	%r13(%r8),%f28
-	pfld.q	%r14(%r9),%f24
-	pfld.q	%r15(%r10),%f20
-	pfld.q	%r16(%r11),%f16
-	pfld.q	%r17(%r12),%f12
-	pfld.q	%r28(%r13),%f8
-	pfld.q	%r31(%r14),%f4
-
-	# Index form, with auto-increment.
-	pfld.q	%r5(%r0)++,%f0
-	pfld.q	%r6(%r1)++,%f4
-	pfld.q	%r7(%r2)++,%f8
-	pfld.q	%r8(%r3)++,%f12
-	pfld.q	%r9(%r4)++,%f16
-	pfld.q	%r0(%r5)++,%f20
-	pfld.q	%r1(%r6)++,%f24
-	pfld.q	%r12(%r7)++,%f28
-	pfld.q	%r13(%r8)++,%f0
-	pfld.q	%r14(%r9)++,%f4
-	pfld.q	%r15(%r10)++,%f8
-	pfld.q	%r16(%r11)++,%f12
-	pfld.q	%r17(%r12)++,%f16
-	pfld.q	%r28(%r13)++,%f20
-	pfld.q	%r31(%r14)++,%f24
-
-
diff --git a/gas/testsuite/gas/lns/lns.exp b/gas/testsuite/gas/lns/lns.exp
index 5ccf120..dcf593c 100644
--- a/gas/testsuite/gas/lns/lns.exp
+++ b/gas/testsuite/gas/lns/lns.exp
@@ -26,7 +26,6 @@ run_dump_test "lns-duplicate"
 # defined a macro...
 if {
         ![istarget i370-*-*]
-     && ![istarget i960-*-*]
      && ![istarget s390*-*-*]
 } {
     # Use alternate file for targets using DW_LNS_fixed_advance_pc opcodes.
diff --git a/gas/testsuite/gas/symver/symver.exp b/gas/testsuite/gas/symver/symver.exp
index 87e3cc8..c40fc9a 100644
--- a/gas/testsuite/gas/symver/symver.exp
+++ b/gas/testsuite/gas/symver/symver.exp
@@ -46,11 +46,6 @@ if { [is_elf_format] } then {
       return
     }
 
-    # not yet supported by i960
-    if {[istarget "i960-*-*"]} {
-      return
-    }
-
     run_dump_test "symver0" 
     run_dump_test "symver1" 
     run_error_test "symver2" ""
diff --git a/gas/write.c b/gas/write.c
index 4c8e42b..2d0bbe4 100644
--- a/gas/write.c
+++ b/gas/write.c
@@ -926,9 +926,7 @@ fixup_segment (fixS *fixP, segT this_segment)
   /* If the linker is doing the relaxing, we must not do any fixups.
 
      Well, strictly speaking that's not true -- we could do any that
-     are PC-relative and don't cross regions that could change size.
-     And for the i960 we might be able to turn callx/callj into bal
-     anyways in cases where we know the maximum displacement.  */
+     are PC-relative and don't cross regions that could change size.  */
   if (linkrelax && TC_LINKRELAX_FIXUP (this_segment))
     {
       for (; fixP; fixP = fixP->fx_next)
diff --git a/gas/write.h b/gas/write.h
index 3c6f259..4f510d6 100644
--- a/gas/write.h
+++ b/gas/write.h
@@ -106,10 +106,6 @@ struct fix
   struct fix *fx_next;
 
   /* If NULL, no bitfix's to do.  */
-  /* Only i960-coff and ns32k use this, and i960-coff stores an
-     integer.  This can probably be folded into tc_fix_data, below.
-     @@ Alpha also uses it, but only to disable certain relocation
-     processing.  */
   bit_fixS *fx_bit_fixP;
 
   bfd_reloc_code_real_type fx_r_type;
diff --git a/include/ChangeLog b/include/ChangeLog
index 74e6a53..41d785a 100644
--- a/include/ChangeLog
+++ b/include/ChangeLog
@@ -1,3 +1,18 @@
+2018-04-11  Alan Modra  <amodra@gmail.com>
+
+	* aout/adobe.h: Delete.
+	* aout/reloc.h: Delete.
+	* coff/i860.h: Delete.
+	* coff/i960.h: Delete.
+	* elf/i860.h: Delete.
+	* elf/i960.h: Delete.
+	* opcode/i860.h: Delete.
+	* opcode/i960.h: Delete.
+	* aout/aout64.h (enum reloc_type): Trim off 29k and other unused values.
+	* aout/ar.h (ARMAGB): Remove.
+	* coff/internal.h (struct internal_aouthdr, struct internal_scnhdr,
+	union internal_auxent): Remove i960 support.
+
 2018-04-09  Alan Modra  <amodra@gmail.com>
 
 	* elf/ppc.h (R_PPC_PLTSEQ, R_PPC_PLTCALL): Define.
diff --git a/include/aout/adobe.h b/include/aout/adobe.h
deleted file mode 100644
index 33770f9..0000000
--- a/include/aout/adobe.h
+++ /dev/null
@@ -1,319 +0,0 @@
-/* `a.out.adobe' differences from standard a.out files
-
-   Copyright (C) 2001-2018 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 3 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
-   MA 02110-1301, USA.  */
-
-#ifndef __A_OUT_ADOBE_H__
-#define __A_OUT_ADOBE_H__
-
-#define	BYTES_IN_WORD	4
-
-/* Struct external_exec is the same.  */
-
-/* This is the layout on disk of the 32-bit or 64-bit exec header.  */
-
-struct external_exec 
-{
-  bfd_byte e_info[4];		    /* Magic number and stuff.  */
-  bfd_byte e_text[BYTES_IN_WORD];   /* Length of text section in bytes.  */
-  bfd_byte e_data[BYTES_IN_WORD];   /* Length of data section in bytes.  */
-  bfd_byte e_bss[BYTES_IN_WORD];    /* Length of bss area in bytes.  */
-  bfd_byte e_syms[BYTES_IN_WORD];   /* Length of symbol table in bytes.  */
-  bfd_byte e_entry[BYTES_IN_WORD];  /* Start address.  */
-  bfd_byte e_trsize[BYTES_IN_WORD]; /* Length of text relocation info.  */
-  bfd_byte e_drsize[BYTES_IN_WORD]; /* Length of data relocation info.  */
-};
-
-#define	EXEC_BYTES_SIZE	(4 + BYTES_IN_WORD * 7)
-
-/* Magic numbers for a.out files.  */
-
-#undef	ZMAGIC
-#define	ZMAGIC	0xAD0BE		/* Cute, eh?  */
-#undef	OMAGIC
-#undef	NMAGIC
-
-#define N_BADMAG(x)	  ((x)->a_info != ZMAGIC)
-
-/* By default, segment size is constant.  But some machines override this
-   to be a function of the a.out header (e.g. machine type).  */
-#ifndef	N_SEGSIZE
-#define	N_SEGSIZE(x)	SEGMENT_SIZE
-#endif
-#undef N_SEGSIZE   /* FIXMEXXXX */
-
-/* Segment information for the a.out.Adobe format is specified after the
-   file header.  It contains N segment descriptors, followed by one with
-   a type of zero.  
-
-   The actual text of the segments starts at N_TXTOFF in the file,
-   regardless of how many or how few segment headers there are.  */
-
-struct external_segdesc
-{
-  unsigned char e_type[1];
-  unsigned char e_size[3];
-  unsigned char e_virtbase[4];
-  unsigned char e_filebase[4];
-};
-
-struct internal_segdesc
-{
-  unsigned int	a_type:8;	/* Segment type N_TEXT, N_DATA, 0.  */
-  unsigned int 	a_size:24;	/* Segment size.  */
-  bfd_vma	a_virtbase;	/* Virtual address.  */
-  unsigned int	a_filebase;	/* Base address in object file.  */
-};
-
-#define N_TXTADDR(x) is_this_really_unused?
-
-/* This is documented to be at 1024, but appears to really be at 2048.
-   FIXME?!  */
-#define N_TXTOFF(x)	2048
-
-#define	N_TXTSIZE(x) ((x)->a_text)
-
-#define N_DATADDR(x) is_this_really_unused?
-
-#define N_BSSADDR(x) is_this_really_unused?
-
-/* Offsets of the various portions of the file after the text segment.  */
-
-#define N_DATOFF(x)	( N_TXTOFF(x) + N_TXTSIZE(x) )
-#define N_TRELOFF(x)	( N_DATOFF(x) + (x)->a_data )
-#define N_DRELOFF(x)	( N_TRELOFF(x) + (x)->a_trsize )
-#define N_SYMOFF(x)	( N_DRELOFF(x) + (x)->a_drsize )
-#define N_STROFF(x)	( N_SYMOFF(x) + (x)->a_syms )
-
-/* Symbols.  */
-struct external_nlist
-{
-  bfd_byte e_strx[BYTES_IN_WORD];	/* Index into string table of name.  */
-  bfd_byte e_type[1];			/* Type of symbol.  */
-  bfd_byte e_other[1];			/* Misc info (usually empty).  */
-  bfd_byte e_desc[2];			/* Description field.  */
-  bfd_byte e_value[BYTES_IN_WORD];	/* Value of symbol.  */
-};
-
-#define EXTERNAL_NLIST_SIZE (BYTES_IN_WORD+4+BYTES_IN_WORD)
-
-struct internal_nlist
-{
-  unsigned long n_strx;			/* Index into string table of name.  */
-  unsigned char n_type;			/* Type of symbol.  */
-  unsigned char n_other;		/* Misc info (usually empty).  */
-  unsigned short n_desc;		/* Description field.  */
-  bfd_vma n_value;			/* Value of symbol.  */
-};
-
-/* The n_type field is the symbol type, containing:  */
-
-#define N_UNDF	0	/* Undefined symbol.  */
-#define N_ABS 	2	/* Absolute symbol -- defined at particular addr.  */
-#define N_TEXT 	4	/* Text sym -- defined at offset in text seg.  */
-#define N_DATA 	6	/* Data sym -- defined at offset in data seg.  */
-#define N_BSS 	8	/* BSS  sym -- defined at offset in zero'd seg.  */
-#define	N_COMM	0x12	/* Common symbol (visible after shared lib dynlink).  */
-#define N_FN	0x1f	/* File name of .o file.  */
-#define	N_FN_SEQ 0x0C	/* N_FN from Sequent compilers (sigh).  */
-/* Note: N_EXT can only be usefully OR-ed with N_UNDF, N_ABS, N_TEXT,
-   N_DATA, or N_BSS.  When the low-order bit of other types is set,
-   (e.g. N_WARNING versus N_FN), they are two different types.  */
-#define N_EXT 	1	/* External symbol (as opposed to local-to-this-file).  */
-#define N_TYPE  0x1e
-#define N_STAB 	0xe0	/* If any of these bits are on, it's a debug symbol.  */
-
-#define N_INDR 0x0a
-
-/* The following symbols refer to set elements.
-   All the N_SET[ATDB] symbols with the same name form one set.
-   Space is allocated for the set in the text section, and each set
-   elements value is stored into one word of the space.
-   The first word of the space is the length of the set (number of elements).
-
-   The address of the set is made into an N_SETV symbol
-   whose name is the same as the name of the set.
-   This symbol acts like a N_DATA global symbol
-   in that it can satisfy undefined external references.  */
-
-/* These appear as input to LD, in a .o file.  */
-#define	N_SETA	0x14		/* Absolute set element symbol.  */
-#define	N_SETT	0x16		/* Text set element symbol.  */
-#define	N_SETD	0x18		/* Data set element symbol.  */
-#define	N_SETB	0x1A		/* Bss set element symbol.  */
-
-/* This is output from LD.  */
-#define N_SETV	0x1C		/* Pointer to set vector in data area.  */
-
-/* Warning symbol. The text gives a warning message, the next symbol
-   in the table will be undefined. When the symbol is referenced, the
-   message is printed.  */
-
-#define	N_WARNING 0x1e
-
-/* Relocations 
-
-  There	are two types of relocation flavours for a.out systems,
-  standard and extended. The standard form is used on systems where the
-  instruction has room for all the bits of an offset to the operand, whilst
-  the extended form is used when an address operand has to be split over n
-  instructions. Eg, on the 68k, each move instruction can reference
-  the target with a displacement of 16 or 32 bits. On the sparc, move
-  instructions use an offset of 14 bits, so the offset is stored in
-  the reloc field, and the data in the section is ignored.  */
-
-/* This structure describes a single relocation to be performed.
-   The text-relocation section of the file is a vector of these structures,
-   all of which apply to the text section.
-   Likewise, the data-relocation section applies to the data section.  */
-
-struct reloc_std_external
-{
-  bfd_byte r_address[BYTES_IN_WORD];	/* Offset of data to relocate.  */
-  bfd_byte r_index[3];			/* Symbol table index of symbol.  */
-  bfd_byte r_type[1];			/* Relocation type.  */
-};
-
-#define	RELOC_STD_BITS_PCREL_BIG	0x80
-#define	RELOC_STD_BITS_PCREL_LITTLE	0x01
-
-#define	RELOC_STD_BITS_LENGTH_BIG	0x60
-#define	RELOC_STD_BITS_LENGTH_SH_BIG	5	/* To shift to units place.  */
-#define	RELOC_STD_BITS_LENGTH_LITTLE	0x06
-#define	RELOC_STD_BITS_LENGTH_SH_LITTLE	1
-
-#define	RELOC_STD_BITS_EXTERN_BIG	0x10
-#define	RELOC_STD_BITS_EXTERN_LITTLE	0x08
-
-#define	RELOC_STD_BITS_BASEREL_BIG	0x08
-#define	RELOC_STD_BITS_BASEREL_LITTLE	0x08
-
-#define	RELOC_STD_BITS_JMPTABLE_BIG	0x04
-#define	RELOC_STD_BITS_JMPTABLE_LITTLE	0x04
-
-#define	RELOC_STD_BITS_RELATIVE_BIG	0x02
-#define	RELOC_STD_BITS_RELATIVE_LITTLE	0x02
-
-#define	RELOC_STD_SIZE	(BYTES_IN_WORD + 3 + 1)		/* Bytes per relocation entry.  */
-
-struct reloc_std_internal
-{
-  bfd_vma r_address;		/* Address (within segment) to be relocated.  */
-  /* The meaning of r_symbolnum depends on r_extern.  */
-  unsigned int r_symbolnum:24;
-  /* Nonzero means value is a pc-relative offset
-     and it should be relocated for changes in its own address
-     as well as for changes in the symbol or section specified.  */
-  unsigned int r_pcrel:1;
-  /* Length (as exponent of 2) of the field to be relocated.
-     Thus, a value of 2 indicates 1<<2 bytes.  */
-  unsigned int r_length:2;
-  /* 1 => relocate with value of symbol.
-     r_symbolnum is the index of the symbol
-     in files the symbol table.
-     0 => relocate with the address of a segment.
-     r_symbolnum is N_TEXT, N_DATA, N_BSS or N_ABS
-     (the N_EXT bit may be set also, but signifies nothing).  */
-  unsigned int r_extern:1;
-  /* The next three bits are for SunOS shared libraries, and seem to
-     be undocumented.  */
-  unsigned int r_baserel:1;	/* Linkage table relative.  */
-  unsigned int r_jmptable:1;	/* pc-relative to jump table.  */
-  unsigned int r_relative:1;	/* "relative relocation".  */
-  /* unused */
-  unsigned int r_pad:1;		/* Padding -- set to zero.  */
-};
-
-
-/* EXTENDED RELOCS  */
-
-struct reloc_ext_external
-{
-  bfd_byte r_address[BYTES_IN_WORD];	/* Offset of data to relocate.  */
-  bfd_byte r_index[3];			/* Symbol table index of symbol.  */
-  bfd_byte r_type[1];			/* Relocation type.  */
-  bfd_byte r_addend[BYTES_IN_WORD];	/* Datum addend.  */
-};
-
-#define	RELOC_EXT_BITS_EXTERN_BIG	0x80
-#define	RELOC_EXT_BITS_EXTERN_LITTLE	0x01
-
-#define	RELOC_EXT_BITS_TYPE_BIG		0x1F
-#define	RELOC_EXT_BITS_TYPE_SH_BIG	0
-#define	RELOC_EXT_BITS_TYPE_LITTLE	0xF8
-#define	RELOC_EXT_BITS_TYPE_SH_LITTLE	3
-
-/* Bytes per relocation entry */
-#define	RELOC_EXT_SIZE	(BYTES_IN_WORD + 3 + 1 + BYTES_IN_WORD)
-
-enum reloc_type
-{
-  /* Simple relocations.  */
-  RELOC_8,			/* data[0:7] = addend + sv 		*/
-  RELOC_16,			/* data[0:15] = addend + sv 		*/
-  RELOC_32,			/* data[0:31] = addend + sv 		*/
-  /* PC-rel displacement.  */
-  RELOC_DISP8,			/* data[0:7] = addend - pc + sv 	*/
-  RELOC_DISP16,			/* data[0:15] = addend - pc + sv 	*/
-  RELOC_DISP32,			/* data[0:31] = addend - pc + sv 	*/
-  /* Special.  */
-  RELOC_WDISP30,		/* data[0:29] = (addend + sv - pc)>>2 	*/
-  RELOC_WDISP22,		/* data[0:21] = (addend + sv - pc)>>2 	*/
-  RELOC_HI22,			/* data[0:21] = (addend + sv)>>10 	*/
-  RELOC_22,			/* data[0:21] = (addend + sv) 		*/
-  RELOC_13,			/* data[0:12] = (addend + sv)		*/
-  RELOC_LO10,			/* data[0:9] = (addend + sv)		*/
-  RELOC_SFA_BASE,		
-  RELOC_SFA_OFF13,
-  /* P.I.C. (base-relative).  */
-  RELOC_BASE10,  		/* Not sure - maybe we can do this the  */
-  RELOC_BASE13,			/* right way now.  */
-  RELOC_BASE22,
-  /* For some sort of pc-rel P.I.C. (?)  */
-  RELOC_PC10,
-  RELOC_PC22,
-  /* P.I.C. jump table.  */
-  RELOC_JMP_TBL,
-  /* Reputedly for shared libraries somehow.  */
-  RELOC_SEGOFF16,
-  RELOC_GLOB_DAT,
-  RELOC_JMP_SLOT,
-  RELOC_RELATIVE,
-
-  RELOC_11,	
-  RELOC_WDISP2_14,
-  RELOC_WDISP19,
-  RELOC_HHI22,			/* data[0:21] = (addend + sv) >> 42     */
-  RELOC_HLO10,			/* data[0:9] = (addend + sv) >> 32      */
-  
-  /* 29K relocation types */
-  RELOC_JUMPTARG,
-  RELOC_CONST,
-  RELOC_CONSTH,
-  
-  NO_RELOC
-};
-
-struct reloc_internal
-{
-  bfd_vma r_address;		/* Offset of data to relocate.  */
-  long	r_index;		/* Symbol table index of symbol.  */
-  enum reloc_type r_type;	/* Relocation type.  */
-  bfd_vma r_addend;		/* Datum addend.  */
-};
-
-#endif	/* __A_OUT_ADOBE_H__ */
diff --git a/include/aout/aout64.h b/include/aout/aout64.h
index 0e7ced7..a0827d5 100644
--- a/include/aout/aout64.h
+++ b/include/aout/aout64.h
@@ -476,25 +476,7 @@ enum reloc_type
   RELOC_11,	
   RELOC_WDISP2_14,
   RELOC_WDISP19,
-  RELOC_HHI22,			/* data[0:21] = (addend + sv) >> 42     */
-  RELOC_HLO10,			/* data[0:9] = (addend + sv) >> 32      */
-  
-  /* 29K relocation types.  */
-  RELOC_JUMPTARG,
-  RELOC_CONST,
-  RELOC_CONSTH,
-  
-  /* All the new ones I can think of, for sparc v9.  */
-  RELOC_64,			/* data[0:63] = addend + sv 		*/
-  RELOC_DISP64,			/* data[0:63] = addend - pc + sv 	*/
-  RELOC_WDISP21,		/* data[0:20] = (addend + sv - pc)>>2 	*/
-  RELOC_DISP21,			/* data[0:20] = addend - pc + sv        */
-  RELOC_DISP14,			/* data[0:13] = addend - pc + sv 	*/
-  /* Q .
-     What are the other ones,
-     Since this is a clean slate, can we throw away the ones we dont
-     understand ? Should we sort the values ? What about using a
-     microcode format like the 68k ?  */
+
   NO_RELOC
   };
 
diff --git a/include/aout/ar.h b/include/aout/ar.h
index d9e3bc6..905fcbc 100644
--- a/include/aout/ar.h
+++ b/include/aout/ar.h
@@ -28,7 +28,6 @@
    compatible with existing BSDish archives. */
 
 #define ARMAG  "!<arch>\012"	/* For COFF and a.out archives.  */
-#define ARMAGB "!<bout>\012"	/* For b.out archives.  */
 #define ARMAGT "!<thin>\012"	/* For thin archives.  */
 #define SARMAG 8
 #define ARFMAG "`\012"
diff --git a/include/aout/reloc.h b/include/aout/reloc.h
deleted file mode 100644
index 2249107f..0000000
--- a/include/aout/reloc.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/* reloc.h -- Header file for relocation information.
-   Copyright (C) 1989-2018 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 3 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
-   MA 02110-1301, USA.  */
-
-/* Relocation types for a.out files using reloc_info_extended
-   (SPARC and AMD 29000). */
-
-#ifndef _RELOC_H_READ_
-#define _RELOC_H_READ_ 1
-
-enum reloc_type
-  {
-    RELOC_8,        RELOC_16,        RELOC_32, /* simple relocations */
-    RELOC_DISP8,    RELOC_DISP16,    RELOC_DISP32, /* pc-rel displacement */
-    RELOC_WDISP30,  RELOC_WDISP22,
-    RELOC_HI22,     RELOC_22,
-    RELOC_13,       RELOC_LO10,
-    RELOC_SFA_BASE, RELOC_SFA_OFF13,
-    RELOC_BASE10,   RELOC_BASE13,    RELOC_BASE22, /* P.I.C. (base-relative) */
-    RELOC_PC10,     RELOC_PC22,	/* for some sort of pc-rel P.I.C. (?) */
-    RELOC_JMP_TBL,		/* P.I.C. jump table */
-    RELOC_SEGOFF16,		/* reputedly for shared libraries somehow */
-    RELOC_GLOB_DAT,  RELOC_JMP_SLOT, RELOC_RELATIVE,
-    RELOC_11,
-    RELOC_WDISP2_14,
-    RELOC_WDISP19,
-    RELOC_HHI22,
-    RELOC_HLO10,
-    
-    /* 29K relocation types */
-    RELOC_JUMPTARG, RELOC_CONST,     RELOC_CONSTH,
-    
-    RELOC_WDISP14, RELOC_WDISP21,
-    
-    NO_RELOC
-    };
-
-#define	RELOC_TYPE_NAMES \
-"8",		"16",		"32",		"DISP8",	\
-"DISP16",	"DISP32",	"WDISP30",	"WDISP22",	\
-"HI22",		"22",		"13",		"LO10",		\
-"SFA_BASE",	"SFAOFF13",	"BASE10",	"BASE13",	\
-"BASE22",	"PC10",		"PC22",		"JMP_TBL",	\
-"SEGOFF16",	"GLOB_DAT",	"JMP_SLOT",	"RELATIVE",	\
-"11",		"WDISP2_14",	"WDISP19", 	"HHI22",	\
-"HLO10",							\
-"JUMPTARG",	"CONST",	"CONSTH",	"WDISP14",	\
-"WDISP21",	\
-"NO_RELOC"
-
-#endif /* _RELOC_H_READ_ */
-
-/* end of reloc.h */
diff --git a/include/coff/i860.h b/include/coff/i860.h
deleted file mode 100644
index 3afa38f..0000000
--- a/include/coff/i860.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/* COFF information for the Intel i860.
-   
-   Copyright (C) 2001-2018 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 3 of the License, or
-   (at your option) any later version.
-   
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-   
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
-   MA 02110-1301, USA.  */
-
-/* This file was hacked from i386.h   [dolan@ssd.intel.com] */
-
-#define L_LNNO_SIZE 2
-#include "coff/external.h"
-
-/* Bits for f_flags:
- 	F_RELFLG	relocation info stripped from file
- 	F_EXEC		file is executable (no unresolved external references)
- 	F_LNNO		line numbers stripped from file
- 	F_LSYMS		local symbols stripped from file
- 	F_AR32WR	file has byte ordering of an AR32WR machine (e.g. vax).  */
-
-#define F_RELFLG	(0x0001)
-#define F_EXEC		(0x0002)
-#define F_LNNO		(0x0004)
-#define F_LSYMS		(0x0008)
-
-#define	I860MAGIC	0x14d
-
-#define I860BADMAG(x)   ((x).f_magic != I860MAGIC)
-
-#undef AOUTSZ
-#define AOUTSZ 36
-
-/* FIXME: What are the a.out magic numbers?  */
-
-#define _ETEXT	"etext"
-
-/********************** RELOCATION DIRECTIVES **********************/
-
-struct external_reloc
-{
-  char r_vaddr[4];
-  char r_symndx[4];
-  char r_type[2];
-};
-
-#define RELOC struct external_reloc
-#define RELSZ 10
-
-/* The relocation directory entry types.
-     PAIR   : The low half that follows relates to the preceding HIGH[ADJ].
-     HIGH   : The high half of a 32-bit constant.
-     LOWn   : The low half, insn bits 15..(n-1), 2^n-byte aligned. 
-     SPLITn : The low half, insn bits 20..16 and 10..(n-1), 2^n-byte aligned. 
-     HIGHADJ: Similar to HIGH, but with adjustment.
-     BRADDR : 26-bit branch displacement.
-
-   Note: The Intel assembler manual lists LOW4 as one of the
-   relocation types, but it appears to be useless for the i860.
-   We will recognize it anyway, just in case it actually appears in
-   any object files.  */
-
-enum {
-  COFF860_R_PAIR	= 0x1c,
-  COFF860_R_HIGH	= 0x1e,
-  COFF860_R_LOW0	= 0x1f,
-  COFF860_R_LOW1	= 0x20,
-  COFF860_R_LOW2	= 0x21,
-  COFF860_R_LOW3	= 0x22,
-  COFF860_R_LOW4	= 0x23,
-  COFF860_R_SPLIT0	= 0x24,
-  COFF860_R_SPLIT1	= 0x25,
-  COFF860_R_SPLIT2	= 0x26,
-  COFF860_R_HIGHADJ	= 0x27,
-  COFF860_R_BRADDR	= 0x28
-};
-
diff --git a/include/coff/i960.h b/include/coff/i960.h
deleted file mode 100644
index 19d35f9..0000000
--- a/include/coff/i960.h
+++ /dev/null
@@ -1,320 +0,0 @@
-/* coff information for 80960.  Origins: Intel corp, natch.
-   
-   Copyright (C) 2001-2018 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 3 of the License, or
-   (at your option) any later version.
-   
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-   
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
-   MA 02110-1301, USA.  */
-
-/* NOTE: Tagentries (cf TAGBITS) are no longer used by the 960 */
-
-/********************** FILE HEADER **********************/
-
-struct external_filehdr
-{
-  char f_magic[2];	/* magic number			*/
-  char f_nscns[2];	/* number of sections		*/
-  char f_timdat[4];	/* time & date stamp		*/
-  char f_symptr[4];	/* file pointer to symtab	*/
-  char f_nsyms[4];	/* number of symtab entries	*/
-  char f_opthdr[2];	/* sizeof(optional hdr)		*/
-  char f_flags[2];	/* flags			*/
-};
-
-#define OMAGIC      (0407)	/* old impure format. data immediately
-                                   follows text. both sections are rw. */
-#define NMAGIC      (0410)	/* split i&d, read-only text */
-
-/*
-*	Intel 80960 (I960) processor flags.
-*	F_I960TYPE == mask for processor type field. 
-*/
-
-#define	F_I960TYPE	(0xf000)
-#define	F_I960CORE	(0x1000)
-#define	F_I960KB	(0x2000)
-#define	F_I960SB	(0x2000)
-#define	F_I960MC	(0x3000)
-#define	F_I960XA	(0x4000)
-#define	F_I960CA	(0x5000)
-#define	F_I960KA	(0x6000)
-#define	F_I960SA	(0x6000)
-#define F_I960JX	(0x7000)
-#define F_I960HX	(0x8000)
-
-
-/** i80960 Magic Numbers
-*/
-
-#define I960ROMAGIC	(0x160)	/* read-only text segments */
-#define I960RWMAGIC	(0x161)	/* read-write text segments */
-
-#define I960BADMAG(x) (((x).f_magic!=I960ROMAGIC) && ((x).f_magic!=I960RWMAGIC))
-
-#define	FILHDR	struct external_filehdr
-#define	FILHSZ	20
-
-/********************** AOUT "OPTIONAL HEADER" **********************/
-
-typedef struct
-{
-  unsigned long	phys_addr;
-  unsigned long	bitarray;
-} TAGBITS;
-
-typedef struct 
-{
-  char 	magic[2];		/* type of file				*/
-  char	vstamp[2];		/* version stamp			*/
-  char	tsize[4];		/* text size in bytes, padded to FW bdry*/
-  char	dsize[4];		/* initialized data "  "		*/
-  char	bsize[4];		/* uninitialized data "   "		*/
-  char	entry[4];		/* entry pt.				*/
-  char 	text_start[4];		/* base of text used for this file */
-  char 	data_start[4];		/* base of data used for this file */
-  char	tagentries[4];		/* number of tag entries to follow */
-}
-AOUTHDR;
-
-/* return a pointer to the tag bits array */
-
-#define TAGPTR(aout) ((TAGBITS *) (&(aout.tagentries)+1))
-
-/* compute size of a header */
-
-/*#define AOUTSZ(aout) (sizeof(AOUTHDR)+(aout.tagentries*sizeof(TAGBITS)))*/
-#define AOUTSZ 32
-#define AOUTHDRSZ 32
-
-
-/********************** SECTION HEADER **********************/
-
-struct external_scnhdr
-{
-  char		s_name[8];	/* section name			*/
-  char		s_paddr[4];	/* physical address, aliased s_nlib */
-  char		s_vaddr[4];	/* virtual address		*/
-  char		s_size[4];	/* section size			*/
-  char		s_scnptr[4];	/* file ptr to raw data for section */
-  char		s_relptr[4];	/* file ptr to relocation	*/
-  char		s_lnnoptr[4];	/* file ptr to line numbers	*/
-  char		s_nreloc[2];	/* number of relocation entries	*/
-  char		s_nlnno[2];	/* number of line number entries*/
-  char		s_flags[4];	/* flags			*/
-  char 		s_align[4];	/* section alignment		*/
-};
-
-
-#define	SCNHDR	struct external_scnhdr
-#define	SCNHSZ	44
-
-/*
- * names of "special" sections
- */
-#define _TEXT   ".text"
-#define _DATA   ".data"
-#define _BSS    ".bss"
-
-/********************** LINE NUMBERS **********************/
-
-/* 1 line number entry for every "breakpointable" source line in a section.
- * Line numbers are grouped on a per function basis; first entry in a function
- * grouping will have l_lnno = 0 and in place of physical address will be the
- * symbol table index of the function name.
- */
-struct external_lineno
-{
-  union
-  {
-    char l_symndx[4];	/* function name symbol index, iff l_lnno == 0*/
-    char l_paddr[4];	/* (physical) address of line number	*/
-  } l_addr;
-
-  char l_lnno[2];		/* line number		*/
-  char padding[2];	/* force alignment	*/
-};
-
-
-#define	LINENO	struct external_lineno
-#define	LINESZ	8
-
-/********************** SYMBOLS **********************/
-
-#define E_SYMNMLEN	8	/* # characters in a symbol name	*/
-#define E_FILNMLEN	14	/* # characters in a file name		*/
-#define E_DIMNUM	4	/* # array dimensions in auxiliary entry */
-
-struct external_syment 
-{
-  union
-  {
-    char e_name[E_SYMNMLEN];
-
-    struct
-    {
-      char e_zeroes[4];
-      char e_offset[4];
-    } e;
-  } e;
-
-  char e_value[4];
-  char e_scnum[2];
-  char e_flags[2];
-  char e_type[4];
-  char e_sclass[1];
-  char e_numaux[1];
-  char pad2[2];
-};
-
-#define N_BTMASK	(0x1f)
-#define N_TMASK		(0x60)
-#define N_BTSHFT	(5)
-#define N_TSHIFT	(2)
-  
-union external_auxent
-{
-  struct
-  {
-    char x_tagndx[4];	/* str, un, or enum tag indx */
-
-    union
-    {
-      struct
-      {
-	char  x_lnno[2]; /* declaration line number */
-	char  x_size[2]; /* str/union/array size */
-      } x_lnsz;
-
-      char x_fsize[4];	/* size of function */
-
-    } x_misc;
-
-    union
-    {
-      struct 		/* if ISFCN, tag, or .bb */
-      {
-	char x_lnnoptr[4];	/* ptr to fcn line # */
-	char x_endndx[4];	/* entry ndx past block end */
-      } x_fcn;
-
-      struct 		/* if ISARY, up to 4 dimen. */
-      {
-	char x_dimen[E_DIMNUM][2];
-      } x_ary;
-
-    } x_fcnary;
-
-    char x_tvndx[2];		/* tv index */
-
-  } x_sym;
-
-  union
-  {
-    char x_fname[E_FILNMLEN];
-
-    struct
-    {
-      char x_zeroes[4];
-      char x_offset[4];
-    } x_n;
-
-  } x_file;
-
-  struct
-  {
-    char x_scnlen[4];			/* section length */
-    char x_nreloc[2];	/* # relocation entries */
-    char x_nlinno[2];	/* # line numbers */
-
-  } x_scn;
-
-  struct
-  {
-    char x_tvfill[4];	/* tv fill value */
-    char x_tvlen[2];	/* length of .tv */
-    char x_tvran[2][2];	/* tv range */
-
-  } x_tv;		/* info about .tv section (in auxent of symbol .tv)) */
-
-  /******************************************
-   *  I960-specific *2nd* aux. entry formats
-   ******************************************/
-  struct
-  {
-    /* This is a very old typo that keeps getting propagated. */
-#define x_stdindx x_stindx
-    char x_stindx[4];	/* sys. table entry */
-  } x_sc;	/* system call entry */
-
-  struct
-  {
-    char x_balntry[4]; /* BAL entry point */
-  } x_bal; /* BAL-callable function */
-
-  struct
-  {
-    char x_timestamp[4];	        /* time stamp */
-    char 	x_idstring[20];	        /* producer identity string */
-
-  } x_ident;	                        /* Producer ident info */
-};
-
-#define	SYMENT	struct external_syment
-#define	SYMESZ	24
-#define	AUXENT	union external_auxent
-#define	AUXESZ	24
-
-#	define _ETEXT	"_etext"
-
-/********************** RELOCATION DIRECTIVES **********************/
-
-struct external_reloc
-{
-  char r_vaddr[4];
-  char r_symndx[4];
-  char r_type[2];
-  char pad[2];
-};
-
-/* r_type values for the i960.  */
-
-/* The i960 uses R_RELLONG, which is defined in internal.h as 0x11.
-   It is an absolute 32 bit relocation.  */
-
-#define R_IPRMED 	(0x19)	/* 24-bit ip-relative relocation */
-#define R_OPTCALL	(0x1b)	/* 32-bit optimizable call (leafproc/sysproc) */
-#define R_OPTCALLX	(0x1c)	/* 64-bit optimizable call (leafproc/sysproc) */
-
-/* The following relocation types are defined use by relaxing linkers,
-   which convert 32 bit calls (which require a 64 bit instruction)
-   into 24 bit calls (which require a 32 bit instruction) when
-   possible.  It will be possible whenever the target of the call is
-   within a 24 bit range of the call instruction.
-
-   It is always safe to ignore these relocations.  They only serve to
-   mark points which the relaxing linker will have to consider.  The
-   assembler must ensure that the correct code is generated even if
-   the relocations are ignored.  In particular, this means that the
-   R_IPR13 relocation may not appear with an external symbol.  */
-
-#define R_IPR13		(0x1d)	/* 13 bit ip-relative branch */
-#define R_ALIGN		(0x1e)  /* alignment marker.  This has no
-				   associated symbol.  Instead, the
-				   r_symndx field indicates the
-				   require alignment at this point in
-				   the file.  It must be a power of 2.  */
-
-#define RELOC struct external_reloc
-#define RELSZ 12
-
diff --git a/include/coff/internal.h b/include/coff/internal.h
index 81a84c8..2b7737d 100644
--- a/include/coff/internal.h
+++ b/include/coff/internal.h
@@ -257,9 +257,6 @@ struct internal_aouthdr
   bfd_vma text_start;		/* base of text used for this file */
   bfd_vma data_start;		/* base of data used for this file */
 
-  /* i960 stuff */
-  unsigned long tagentries;	/* number of tag entries to follow */
-
   /* RS/6000 stuff */
   bfd_vma o_toc;		/* address of TOC			*/
   short o_snentry;		/* section number for entry point */
@@ -416,7 +413,6 @@ struct internal_scnhdr
   unsigned long s_nreloc;	/* number of relocation entries	*/
   unsigned long s_nlnno;	/* number of line number entries*/
   long s_flags;			/* flags			*/
-  long s_align;			/* used on I960			*/
   unsigned char s_page;         /* TI COFF load page            */
 };
 
@@ -668,28 +664,6 @@ union internal_auxent
 /* 		14	??? */
 #define	XMC_TC0	15		/* Read-write TOC anchor */
 #define XMC_TD	16		/* Read-write data in TOC */
-
-  /******************************************
-   *  I960-specific *2nd* aux. entry formats
-   ******************************************/
-  struct
-  {
-    /* This is a very old typo that keeps getting propagated. */
-#define x_stdindx x_stindx
-    long x_stindx;		/* sys. table entry */
-  }      x_sc;			/* system call entry */
-
-  struct
-  {
-    unsigned long x_balntry;	/* BAL entry point */
-  }      x_bal;			/* BAL-callable function */
-
-  struct
-  {
-    unsigned long x_timestamp;	/* time stamp */
-    char x_idstring[20];	/* producer identity string */
-  }      x_ident;		/* Producer ident info */
-
 };
 
 /********************** RELOCATION DIRECTIVES **********************/
diff --git a/include/elf/i860.h b/include/elf/i860.h
deleted file mode 100644
index 7762c1d..0000000
--- a/include/elf/i860.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/* i860 ELF support for BFD.
-   Copyright (C) 2000-2018 Free Software Foundation, Inc.
-
-   Contributed by Jason Eckhardt <jle@cygnus.com>.
-
-   This file is part of BFD, the Binary File Descriptor library.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 3 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.  */
-
-#ifndef _ELF_I860_H
-#define _ELF_I860_H
-
-/* Note: i860 ELF is defined to use only RELA relocations.  */
-
-#include "elf/reloc-macros.h"
-
-START_RELOC_NUMBERS (elf_i860_reloc_type)
-     RELOC_NUMBER (R_860_NONE,      0x00)	/* No reloc */
-     RELOC_NUMBER (R_860_32,        0x01)	/* S+A  */
-     RELOC_NUMBER (R_860_COPY,	    0x02)	/* No calculation */
-     RELOC_NUMBER (R_860_GLOB_DAT,  0x03)	/* S, Create GOT entry */
-     RELOC_NUMBER (R_860_JUMP_SLOT, 0x04)	/* S+A, Create PLT entry */
-     RELOC_NUMBER (R_860_RELATIVE,  0x05)	/* B+A, Adj by program base */
-     RELOC_NUMBER (R_860_PC26,      0x30)	/* (S+A-P) >> 2 */ 
-     RELOC_NUMBER (R_860_PLT26,	    0x31)	/* (L+A-P) >> 2 */
-     RELOC_NUMBER (R_860_PC16,      0x32)	/* (S+A-P) >> 2 */
-     RELOC_NUMBER (R_860_LOW0,      0x40)	/* S+A */
-     RELOC_NUMBER (R_860_SPLIT0,    0x42)	/* S+A */       
-     RELOC_NUMBER (R_860_LOW1,      0x44)	/* S+A */
-     RELOC_NUMBER (R_860_SPLIT1,    0x46)	/* S+A */
-     RELOC_NUMBER (R_860_LOW2,      0x48)	/* S+A */
-     RELOC_NUMBER (R_860_SPLIT2,    0x4A)	/* S+A */
-     RELOC_NUMBER (R_860_LOW3,      0x4C)	/* S+A */
-     RELOC_NUMBER (R_860_LOGOT0,    0x50)	/* G */
-     RELOC_NUMBER (R_860_SPGOT0,    0x52)	/* G */
-     RELOC_NUMBER (R_860_LOGOT1,    0x54)	/* G */
-     RELOC_NUMBER (R_860_SPGOT1,    0x56)	/* G */
-     RELOC_NUMBER (R_860_LOGOTOFF0, 0x60)	/* O */
-     RELOC_NUMBER (R_860_SPGOTOFF0, 0x62)	/* O */
-     RELOC_NUMBER (R_860_LOGOTOFF1, 0x64)	/* O */
-     RELOC_NUMBER (R_860_SPGOTOFF1, 0x66)	/* O */
-     RELOC_NUMBER (R_860_LOGOTOFF2, 0x68)	/* O */
-     RELOC_NUMBER (R_860_LOGOTOFF3, 0x6C)	/* O */
-     RELOC_NUMBER (R_860_LOPC,      0x70)	/* (S+A-P) >> 2 */
-     RELOC_NUMBER (R_860_HIGHADJ,   0x80)	/* hiadj(S+A) */
-     RELOC_NUMBER (R_860_HAGOT,     0x90)	/* hiadj(G) */
-     RELOC_NUMBER (R_860_HAGOTOFF,  0xA0)	/* hiadj(O) */
-     RELOC_NUMBER (R_860_HAPC,      0xB0)	/* hiadj((S+A-P) >> 2) */
-     RELOC_NUMBER (R_860_HIGH,      0xC0)	/* (S+A) >> 16 */
-     RELOC_NUMBER (R_860_HIGOT,     0xD0)	/* G >> 16 */
-     RELOC_NUMBER (R_860_HIGOTOFF,  0xE0)	/* O */
-END_RELOC_NUMBERS (R_860_max)
-
-#endif
diff --git a/include/elf/i960.h b/include/elf/i960.h
deleted file mode 100644
index 1b9a587..0000000
--- a/include/elf/i960.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* Intel 960 ELF support for BFD.
-   Copyright (C) 1999-2018 Free Software Foundation, Inc.
-
-   This file is part of BFD, the Binary File Descriptor library.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 3 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.  */
-
-#ifndef _ELF_I960_H
-#define _ELF_I960_H
-
-#include "elf/reloc-macros.h"
-
-
-START_RELOC_NUMBERS (elf_i960_reloc_type)
-     RELOC_NUMBER (R_960_NONE,	    0)
-     RELOC_NUMBER (R_960_12,	    1)
-     RELOC_NUMBER (R_960_32,	    2)
-     RELOC_NUMBER (R_960_IP24,	    3)
-     RELOC_NUMBER (R_960_SUB,	    4)
-     RELOC_NUMBER (R_960_OPTCALL,   5)
-     RELOC_NUMBER (R_960_OPTCALLX,  6)
-     RELOC_NUMBER (R_960_OPTCALLXA, 7)
-END_RELOC_NUMBERS (R_960_max)
-
-#endif /* _ELF_I960_H */
diff --git a/include/opcode/i860.h b/include/opcode/i860.h
deleted file mode 100644
index 3a0e57f..0000000
--- a/include/opcode/i860.h
+++ /dev/null
@@ -1,506 +0,0 @@
-/* Table of opcodes for the i860.
-   Copyright (C) 1989-2018 Free Software Foundation, Inc.
-
-   This file is part of the GNU opcodes library.
-
-   GAS/GDB is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 3, or (at your option)
-   any later version.
-
-   GAS/GDB is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with GAS or GDB; see the file COPYING3.  If not, write to
-   the Free Software Foundation, 51 Franklin Street - Fifth Floor,
-   Boston, MA 02110-1301, USA.  */
-
-/* Structure of an opcode table entry.  */
-struct i860_opcode
-{
-    /* The opcode name.  */
-    const char *name;
-
-    /* Bits that must be set.  */
-    unsigned long match;
-
-    /* Bits that must not be set.  */
-    unsigned long lose;
-
-    const char *args;
-
-    /* Nonzero if this is a possible expand-instruction.  */
-    char expand;
-};
-
-
-enum expand_type
-{
-    E_MOV = 1, E_ADDR, E_U32, E_AND, E_S32, E_DELAY, XP_ONLY
-};
-
-
-/* All i860 opcodes are 32 bits, except for the pseudo-instructions
-   and the operations utilizing a 32-bit address expression, an
-   unsigned 32-bit constant, or a signed 32-bit constant.
-   These opcodes are expanded into a two-instruction sequence for
-   any situation where the immediate operand does not fit in 32 bits.
-   In the case of the add and subtract operations the expansion is
-   to a three-instruction sequence (ex: orh, or, adds).  In cases
-   where the address is to be relocated, the instruction is
-   expanded to handle the worse case, this could be optimized at
-   the final link if the actual address were known.
-
-   The pseudoinstructions are:  mov, fmov, pmov, nop, and fnop.
-   These instructions are implemented as a one or two instruction
-   sequence of other operations.
-
-   The match component is a mask saying which bits must match a
-   particular opcode in order for an instruction to be an instance
-   of that opcode.
-
-   The args component is a string containing one character
-   for each operand of the instruction.
-
-Kinds of operands:
-   #    Number used by optimizer.  It is ignored.
-   1    src1 integer register.
-   2    src2 integer register.
-   d    dest register.
-   c	ctrlreg control register.
-   i    16 bit immediate.
-   I    16 bit immediate, aligned 2^0. (ld.b)
-   J    16 bit immediate, aligned 2^1. (ld.s)
-   K    16 bit immediate, aligned 2^2. (ld.l, {p}fld.l, fst.l)
-   L    16 bit immediate, aligned 2^3. ({p}fld.d, fst.d)
-   M    16 bit immediate, aligned 2^4. ({p}fld.q, fst.q)
-   5    5 bit immediate.
-   l    lbroff 26 bit PC relative immediate.
-   r    sbroff 16 bit PC relative immediate.
-   s	split 16 bit immediate.
-   S	split 16 bit immediate, aligned 2^0. (st.b)
-   T	split 16 bit immediate, aligned 2^1. (st.s)
-   U	split 16 bit immediate, aligned 2^2. (st.l)
-   e    src1 floating point register.
-   f    src2 floating point register.
-   g    dest floating point register.  */
-
-
-/* The order of the opcodes in this table is significant. The assembler
-   requires that all instances of the same mnemonic must be consecutive.
-   If they aren't, the assembler will not function properly.
- 
-   The order of opcodes does not affect the disassembler.  */
-
-static const struct i860_opcode i860_opcodes[] =
-{
-/* REG-Format Instructions.  */
-{ "ld.c",	0x30000000, 0xcc000000, "c,d", 0 },	/* ld.c csrc2,idest */
-{ "ld.b",	0x00000000, 0xfc000000, "1(2),d", 0 },	/* ld.b isrc1(isrc2),idest */
-{ "ld.b",	0x04000000, 0xf8000000, "I(2),d", E_ADDR },	/* ld.b #const(isrc2),idest */
-{ "ld.s",	0x10000000, 0xec000001, "1(2),d", 0 },	/* ld.s isrc1(isrc2),idest */
-{ "ld.s",	0x14000000, 0xe8000001, "J(2),d", E_ADDR },	/* ld.s #const(isrc2),idest */
-{ "ld.l",	0x10000001, 0xec000000, "1(2),d", 0 },	/* ld.l isrc1(isrc2),idest */
-{ "ld.l",	0x14000001, 0xe8000000, "K(2),d", E_ADDR },	/* ld.l #const(isrc2),idest */
-
-{ "st.c",	0x38000000, 0xc4000000, "1,c", 0 },	/* st.c isrc1ni,csrc2 */
-{ "st.b",	0x0c000000, 0xf0000000, "1,S(2)", E_ADDR },	/* st.b isrc1ni,#const(isrc2) */
-{ "st.s",	0x1c000000, 0xe0000001, "1,T(2)", E_ADDR },	/* st.s isrc1ni,#const(isrc2) */
-{ "st.l",	0x1c000001, 0xe0000000, "1,U(2)", E_ADDR },	/* st.l isrc1ni,#const(isrc2) */
-
-{ "ixfr",	0x08000000, 0xf4000000, "1,g", 0 },	/* ixfr isrc1ni,fdest */
-
-{ "fld.l",	0x20000002, 0xdc000001, "1(2),g", 0 },	/* fld.l isrc1(isrc2),fdest */
-{ "fld.l",	0x24000002, 0xd8000001, "K(2),g", E_ADDR },	/* fld.l #const(isrc2),fdest */
-{ "fld.l",	0x20000003, 0xdc000000, "1(2)++,g", 0 },	/* fld.l isrc1(isrc2)++,fdest */
-{ "fld.l",	0x24000003, 0xd8000000, "K(2)++,g", E_ADDR },	/* fld.l #const(isrc2)++,fdest */
-{ "fld.d",	0x20000000, 0xdc000007, "1(2),g", 0 },	/* fld.d isrc1(isrc2),fdest */
-{ "fld.d",	0x24000000, 0xd8000007, "L(2),g", E_ADDR },	/* fld.d #const(isrc2),fdest */
-{ "fld.d",	0x20000001, 0xdc000006, "1(2)++,g", 0 },	/* fld.d isrc1(isrc2)++,fdest */
-{ "fld.d",	0x24000001, 0xd8000006, "L(2)++,g", E_ADDR },	/* fld.d #const(isrc2)++,fdest */
-{ "fld.q",	0x20000004, 0xdc000003, "1(2),g", 0 },	/* fld.q isrc1(isrc2),fdest */
-{ "fld.q",	0x24000004, 0xd8000003, "M(2),g", E_ADDR },	/* fld.q #const(isrc2),fdest */
-{ "fld.q",	0x20000005, 0xdc000002, "1(2)++,g", 0 },	/* fld.q isrc1(isrc2)++,fdest */
-{ "fld.q",	0x24000005, 0xd8000002, "M(2)++,g", E_ADDR },	/* fld.q #const(isrc2)++,fdest */
-
-{ "pfld.l",	0x60000002, 0x9c000001, "1(2),g", 0 },	/* pfld.l isrc1(isrc2),fdest */
-{ "pfld.l",	0x64000002, 0x98000001, "K(2),g", E_ADDR },	/* pfld.l #const(isrc2),fdest */
-{ "pfld.l",	0x60000003, 0x9c000000, "1(2)++,g", 0 },	/* pfld.l isrc1(isrc2)++,fdest */
-{ "pfld.l",	0x64000003, 0x98000000, "K(2)++,g", E_ADDR },	/* pfld.l #const(isrc2)++,fdest */
-{ "pfld.d",	0x60000000, 0x9c000007, "1(2),g", 0 },	/* pfld.d isrc1(isrc2),fdest */
-{ "pfld.d",	0x64000000, 0x98000007, "L(2),g", E_ADDR },	/* pfld.d #const(isrc2),fdest */
-{ "pfld.d",	0x60000001, 0x9c000006, "1(2)++,g", 0 },	/* pfld.d isrc1(isrc2)++,fdest */
-{ "pfld.d",	0x64000001, 0x98000006, "L(2)++,g", E_ADDR },	/* pfld.d #const(isrc2)++,fdest */
-{ "pfld.q",	0x60000004, 0x9c000003, "1(2),g", XP_ONLY },	/* pfld.q isrc1(isrc2),fdest */
-{ "pfld.q",	0x64000004, 0x98000003, "L(2),g", XP_ONLY },	/* pfld.q #const(isrc2),fdest */
-{ "pfld.q",	0x60000005, 0x9c000002, "1(2)++,g", XP_ONLY },	/* pfld.q isrc1(isrc2)++,fdest */
-{ "pfld.q",	0x64000005, 0x98000002, "L(2)++,g", XP_ONLY },	/* pfld.q #const(isrc2)++,fdest */
-
-{ "fst.l",	0x28000002, 0xd4000001, "g,1(2)", 0 },	/* fst.l fdest,isrc1(isrc2) */
-{ "fst.l",	0x2c000002, 0xd0000001, "g,K(2)", E_ADDR },	/* fst.l fdest,#const(isrc2) */
-{ "fst.l",	0x28000003, 0xd4000000, "g,1(2)++", 0 },	/* fst.l fdest,isrc1(isrc2)++ */
-{ "fst.l",	0x2c000003, 0xd0000000, "g,K(2)++", E_ADDR },	/* fst.l fdest,#const(isrc2)++ */
-{ "fst.d",	0x28000000, 0xd4000007, "g,1(2)", 0 },	/* fst.d fdest,isrc1(isrc2) */
-{ "fst.d",	0x2c000000, 0xd0000007, "g,L(2)", E_ADDR },	/* fst.d fdest,#const(isrc2) */
-{ "fst.d",	0x28000001, 0xd4000006, "g,1(2)++", 0 },	/* fst.d fdest,isrc1(isrc2)++ */
-{ "fst.d",	0x2c000001, 0xd0000006, "g,L(2)++", E_ADDR },	/* fst.d fdest,#const(isrc2)++ */
-{ "fst.q",	0x28000004, 0xd4000003, "g,1(2)", 0 },	/* fst.d fdest,isrc1(isrc2) */
-{ "fst.q",	0x2c000004, 0xd0000003, "g,M(2)", E_ADDR },	/* fst.d fdest,#const(isrc2) */
-{ "fst.q",	0x28000005, 0xd4000002, "g,1(2)++", 0 },	/* fst.d fdest,isrc1(isrc2)++ */
-{ "fst.q",	0x2c000005, 0xd0000002, "g,M(2)++", E_ADDR },	/* fst.d fdest,#const(isrc2)++ */
-
-{ "pst.d",	0x3c000000, 0xc0000007, "g,L(2)", E_ADDR },	/* pst.d fdest,#const(isrc2) */
-{ "pst.d",	0x3c000001, 0xc0000006, "g,L(2)++", E_ADDR },	/* pst.d fdest,#const(isrc2)++ */
-
-{ "addu",	0x80000000, 0x7c000000, "1,2,d", 0 },	/* addu isrc1,isrc2,idest */
-{ "addu",	0x84000000, 0x78000000, "i,2,d", E_S32 },	/* addu #const,isrc2,idest */
-{ "adds",	0x90000000, 0x6c000000, "1,2,d", 0 },	/* adds isrc1,isrc2,idest */
-{ "adds",	0x94000000, 0x68000000, "i,2,d", E_S32 },	/* adds #const,isrc2,idest */
-{ "subu",	0x88000000, 0x74000000, "1,2,d", 0 },	/* subu isrc1,isrc2,idest */
-{ "subu",	0x8c000000, 0x70000000, "i,2,d", E_S32 },	/* subu #const,isrc2,idest */
-{ "subs",	0x98000000, 0x64000000, "1,2,d", 0 },	/* subs isrc1,isrc2,idest */
-{ "subs",	0x9c000000, 0x60000000, "i,2,d", E_S32 },	/* subs #const,isrc2,idest */
-
-{ "shl",	0xa0000000, 0x5c000000, "1,2,d", 0 },	/* shl isrc1,isrc2,idest */
-{ "shl",	0xa4000000, 0x58000000, "i,2,d", 0 },	/* shl #const,isrc2,idest */
-{ "shr",	0xa8000000, 0x54000000, "1,2,d", 0 },	/* shr isrc1,isrc2,idest */
-{ "shr",	0xac000000, 0x50000000, "i,2,d", 0 },	/* shr #const,isrc2,idest */
-{ "shrd",	0xb0000000, 0x4c000000, "1,2,d", 0 },	/* shrd isrc1,isrc2,idest */
-{ "shra",	0xb8000000, 0x44000000, "1,2,d", 0 },	/* shra isrc1,isrc2,idest */
-{ "shra",	0xbc000000, 0x40000000, "i,2,d", 0 },	/* shra #const,isrc2,idest */
-
-{ "mov",	0xa0000000, 0x5c00f800, "2,d", 0 },	/* shl r0,isrc2,idest */
-{ "mov",	0x94000000, 0x69e00000, "i,d", E_MOV },	/* adds #const,r0,idest */
-{ "nop",	0xa0000000, 0x5ffff800, "", 0 },	/* shl r0,r0,r0 */
-{ "fnop",	0xb0000000, 0x4ffff800, "", 0 },	/* shrd r0,r0,r0 */
-
-{ "trap",	0x44000000, 0xb8000000, "1,2,d", 0 },	/* trap isrc1ni,isrc2,idest */
-
-{ "flush",	0x34000004, 0xc81f0003, "L(2)", E_ADDR },	/* flush #const(isrc2) */
-{ "flush",	0x34000005, 0xc81f0002, "L(2)++", E_ADDR },	/* flush #const(isrc2)++ */
-
-{ "and",	0xc0000000, 0x3c000000, "1,2,d", 0 },	/* and isrc1,isrc2,idest */
-{ "and",	0xc4000000, 0x38000000, "i,2,d", E_AND },	/* and #const,isrc2,idest */
-{ "andh",	0xcc000000, 0x30000000, "i,2,d", 0 },	/* andh #const,isrc2,idest */
-{ "andnot",	0xd0000000, 0x2c000000, "1,2,d", 0 },	/* andnot isrc1,isrc2,idest */
-{ "andnot",	0xd4000000, 0x28000000, "i,2,d", E_U32 },	/* andnot #const,isrc2,idest */
-{ "andnoth",	0xdc000000, 0x20000000, "i,2,d", 0 },	/* andnoth #const,isrc2,idest */
-{ "or",		0xe0000000, 0x1c000000, "1,2,d", 0 },	/* or isrc1,isrc2,idest */
-{ "or",		0xe4000000, 0x18000000, "i,2,d", E_U32 },	/* or #const,isrc2,idest */
-{ "orh",	0xec000000, 0x10000000, "i,2,d", 0 },	/* orh #const,isrc2,idest */
-{ "xor",	0xf0000000, 0x0c000000, "1,2,d", 0 },	/* xor isrc1,isrc2,idest */
-{ "xor",	0xf4000000, 0x08000000, "i,2,d", E_U32 },	/* xor #const,isrc2,idest */
-{ "xorh",	0xfc000000, 0x00000000, "i,2,d", 0 },	/* xorh #const,isrc2,idest */
-
-{ "bte",	0x58000000, 0xa4000000, "1,2,r", 0 },	/* bte isrc1s,isrc2,sbroff */
-{ "bte",	0x5c000000, 0xa0000000, "5,2,r", 0 },	/* bte #const5,isrc2,sbroff */
-{ "btne",	0x50000000, 0xac000000, "1,2,r", 0 },	/* btne isrc1s,isrc2,sbroff */
-{ "btne",	0x54000000, 0xa8000000, "5,2,r", 0 },	/* btne #const5,isrc2,sbroff */
-{ "bla",	0xb4000000, 0x48000000, "1,2,r", E_DELAY },	/* bla isrc1s,isrc2,sbroff */
-{ "bri",	0x40000000, 0xbc000000, "1", E_DELAY },	/* bri isrc1ni */
-
-/* Core Escape Instruction Format */
-{ "lock",	0x4c000001, 0xb000001e, "", 0 },	/* lock set BL in dirbase */
-{ "calli",	0x4c000002, 0xb000001d, "1", E_DELAY },	/* calli isrc1ni */
-{ "intovr",	0x4c000004, 0xb000001b, "", 0 },	/* intovr trap on integer overflow */
-{ "unlock",	0x4c000007, 0xb0000018, "", 0 },	/* unlock clear BL in dirbase */
-{ "ldio.l",	0x4c000408, 0xb00003f7, "2,d", XP_ONLY },	/* ldio.l isrc2,idest */
-{ "ldio.s",	0x4c000208, 0xb00005f7, "2,d", XP_ONLY },	/* ldio.s isrc2,idest */
-{ "ldio.b",	0x4c000008, 0xb00007f7, "2,d", XP_ONLY },	/* ldio.b isrc2,idest */
-{ "stio.l",	0x4c000409, 0xb00003f6, "1,2", XP_ONLY },	/* stio.l isrc1ni,isrc2 */
-{ "stio.s",	0x4c000209, 0xb00005f6, "1,2", XP_ONLY },	/* stio.s isrc1ni,isrc2 */
-{ "stio.b",	0x4c000009, 0xb00007f6, "1,2", XP_ONLY },	/* stio.b isrc1ni,isrc2 */
-{ "ldint.l",	0x4c00040a, 0xb00003f5, "2,d", XP_ONLY },	/* ldint.l isrc2,idest */
-{ "ldint.s",	0x4c00020a, 0xb00005f5, "2,d", XP_ONLY },	/* ldint.s isrc2,idest */
-{ "ldint.b",	0x4c00000a, 0xb00007f5, "2,d", XP_ONLY },	/* ldint.b isrc2,idest */
-{ "scyc.b",	0x4c00000b, 0xb00007f4, "2", XP_ONLY },		/* scyc.b isrc2 */
-
-/* CTRL-Format Instructions */
-{ "br",		0x68000000, 0x94000000, "l", E_DELAY },	/* br lbroff */
-{ "call",	0x6c000000, 0x90000000, "l", E_DELAY },	/* call lbroff */
-{ "bc",		0x70000000, 0x8c000000, "l", 0 },	/* bc lbroff */
-{ "bc.t",	0x74000000, 0x88000000, "l", E_DELAY },	/* bc.t lbroff */
-{ "bnc",	0x78000000, 0x84000000, "l", 0 },	/* bnc lbroff */
-{ "bnc.t",	0x7c000000, 0x80000000, "l", E_DELAY },	/* bnc.t lbroff */
-
-/* Floating Point Escape Instruction Format - pfam.p fsrc1,fsrc2,fdest.  */
-{ "r2p1.ss",	0x48000400, 0xb40001ff, "e,f,g", 0 },
-{ "r2p1.sd",	0x48000480, 0xb400017f, "e,f,g", 0 },
-{ "r2p1.dd",	0x48000580, 0xb400007f, "e,f,g", 0 },
-{ "r2pt.ss",	0x48000401, 0xb40001fe, "e,f,g", 0 },
-{ "r2pt.sd",	0x48000481, 0xb400017e, "e,f,g", 0 },
-{ "r2pt.dd",	0x48000581, 0xb400007e, "e,f,g", 0 },
-{ "r2ap1.ss",	0x48000402, 0xb40001fd, "e,f,g", 0 },
-{ "r2ap1.sd",	0x48000482, 0xb400017d, "e,f,g", 0 },
-{ "r2ap1.dd",	0x48000582, 0xb400007d, "e,f,g", 0 },
-{ "r2apt.ss",	0x48000403, 0xb40001fc, "e,f,g", 0 },
-{ "r2apt.sd",	0x48000483, 0xb400017c, "e,f,g", 0 },
-{ "r2apt.dd",	0x48000583, 0xb400007c, "e,f,g", 0 },
-{ "i2p1.ss",	0x48000404, 0xb40001fb, "e,f,g", 0 },
-{ "i2p1.sd",	0x48000484, 0xb400017b, "e,f,g", 0 },
-{ "i2p1.dd",	0x48000584, 0xb400007b, "e,f,g", 0 },
-{ "i2pt.ss",	0x48000405, 0xb40001fa, "e,f,g", 0 },
-{ "i2pt.sd",	0x48000485, 0xb400017a, "e,f,g", 0 },
-{ "i2pt.dd",	0x48000585, 0xb400007a, "e,f,g", 0 },
-{ "i2ap1.ss",	0x48000406, 0xb40001f9, "e,f,g", 0 },
-{ "i2ap1.sd",	0x48000486, 0xb4000179, "e,f,g", 0 },
-{ "i2ap1.dd",	0x48000586, 0xb4000079, "e,f,g", 0 },
-{ "i2apt.ss",	0x48000407, 0xb40001f8, "e,f,g", 0 },
-{ "i2apt.sd",	0x48000487, 0xb4000178, "e,f,g", 0 },
-{ "i2apt.dd",	0x48000587, 0xb4000078, "e,f,g", 0 },
-{ "rat1p2.ss",	0x48000408, 0xb40001f7, "e,f,g", 0 },
-{ "rat1p2.sd",	0x48000488, 0xb4000177, "e,f,g", 0 },
-{ "rat1p2.dd",	0x48000588, 0xb4000077, "e,f,g", 0 },
-{ "m12apm.ss",	0x48000409, 0xb40001f6, "e,f,g", 0 },
-{ "m12apm.sd",	0x48000489, 0xb4000176, "e,f,g", 0 },
-{ "m12apm.dd",	0x48000589, 0xb4000076, "e,f,g", 0 },
-{ "ra1p2.ss",	0x4800040a, 0xb40001f5, "e,f,g", 0 },
-{ "ra1p2.sd",	0x4800048a, 0xb4000175, "e,f,g", 0 },
-{ "ra1p2.dd",	0x4800058a, 0xb4000075, "e,f,g", 0 },
-{ "m12ttpa.ss",	0x4800040b, 0xb40001f4, "e,f,g", 0 },
-{ "m12ttpa.sd",	0x4800048b, 0xb4000174, "e,f,g", 0 },
-{ "m12ttpa.dd",	0x4800058b, 0xb4000074, "e,f,g", 0 },
-{ "iat1p2.ss",	0x4800040c, 0xb40001f3, "e,f,g", 0 },
-{ "iat1p2.sd",	0x4800048c, 0xb4000173, "e,f,g", 0 },
-{ "iat1p2.dd",	0x4800058c, 0xb4000073, "e,f,g", 0 },
-{ "m12tpm.ss",	0x4800040d, 0xb40001f2, "e,f,g", 0 },
-{ "m12tpm.sd",	0x4800048d, 0xb4000172, "e,f,g", 0 },
-{ "m12tpm.dd",	0x4800058d, 0xb4000072, "e,f,g", 0 },
-{ "ia1p2.ss",	0x4800040e, 0xb40001f1, "e,f,g", 0 },
-{ "ia1p2.sd",	0x4800048e, 0xb4000171, "e,f,g", 0 },
-{ "ia1p2.dd",	0x4800058e, 0xb4000071, "e,f,g", 0 },
-{ "m12tpa.ss",	0x4800040f, 0xb40001f0, "e,f,g", 0 },
-{ "m12tpa.sd",	0x4800048f, 0xb4000170, "e,f,g", 0 },
-{ "m12tpa.dd",	0x4800058f, 0xb4000070, "e,f,g", 0 },
-
-/* Floating Point Escape Instruction Format - pfsm.p fsrc1,fsrc2,fdest.  */
-{ "r2s1.ss",	0x48000410, 0xb40001ef, "e,f,g", 0 },
-{ "r2s1.sd",	0x48000490, 0xb400016f, "e,f,g", 0 },
-{ "r2s1.dd",	0x48000590, 0xb400006f, "e,f,g", 0 },
-{ "r2st.ss",	0x48000411, 0xb40001ee, "e,f,g", 0 },
-{ "r2st.sd",	0x48000491, 0xb400016e, "e,f,g", 0 },
-{ "r2st.dd",	0x48000591, 0xb400006e, "e,f,g", 0 },
-{ "r2as1.ss",	0x48000412, 0xb40001ed, "e,f,g", 0 },
-{ "r2as1.sd",	0x48000492, 0xb400016d, "e,f,g", 0 },
-{ "r2as1.dd",	0x48000592, 0xb400006d, "e,f,g", 0 },
-{ "r2ast.ss",	0x48000413, 0xb40001ec, "e,f,g", 0 },
-{ "r2ast.sd",	0x48000493, 0xb400016c, "e,f,g", 0 },
-{ "r2ast.dd",	0x48000593, 0xb400006c, "e,f,g", 0 },
-{ "i2s1.ss",	0x48000414, 0xb40001eb, "e,f,g", 0 },
-{ "i2s1.sd",	0x48000494, 0xb400016b, "e,f,g", 0 },
-{ "i2s1.dd",	0x48000594, 0xb400006b, "e,f,g", 0 },
-{ "i2st.ss",	0x48000415, 0xb40001ea, "e,f,g", 0 },
-{ "i2st.sd",	0x48000495, 0xb400016a, "e,f,g", 0 },
-{ "i2st.dd",	0x48000595, 0xb400006a, "e,f,g", 0 },
-{ "i2as1.ss",	0x48000416, 0xb40001e9, "e,f,g", 0 },
-{ "i2as1.sd",	0x48000496, 0xb4000169, "e,f,g", 0 },
-{ "i2as1.dd",	0x48000596, 0xb4000069, "e,f,g", 0 },
-{ "i2ast.ss",	0x48000417, 0xb40001e8, "e,f,g", 0 },
-{ "i2ast.sd",	0x48000497, 0xb4000168, "e,f,g", 0 },
-{ "i2ast.dd",	0x48000597, 0xb4000068, "e,f,g", 0 },
-{ "rat1s2.ss",	0x48000418, 0xb40001e7, "e,f,g", 0 },
-{ "rat1s2.sd",	0x48000498, 0xb4000167, "e,f,g", 0 },
-{ "rat1s2.dd",	0x48000598, 0xb4000067, "e,f,g", 0 },
-{ "m12asm.ss",	0x48000419, 0xb40001e6, "e,f,g", 0 },
-{ "m12asm.sd",	0x48000499, 0xb4000166, "e,f,g", 0 },
-{ "m12asm.dd",	0x48000599, 0xb4000066, "e,f,g", 0 },
-{ "ra1s2.ss",	0x4800041a, 0xb40001e5, "e,f,g", 0 },
-{ "ra1s2.sd",	0x4800049a, 0xb4000165, "e,f,g", 0 },
-{ "ra1s2.dd",	0x4800059a, 0xb4000065, "e,f,g", 0 },
-{ "m12ttsa.ss",	0x4800041b, 0xb40001e4, "e,f,g", 0 },
-{ "m12ttsa.sd",	0x4800049b, 0xb4000164, "e,f,g", 0 },
-{ "m12ttsa.dd",	0x4800059b, 0xb4000064, "e,f,g", 0 },
-{ "iat1s2.ss",	0x4800041c, 0xb40001e3, "e,f,g", 0 },
-{ "iat1s2.sd",	0x4800049c, 0xb4000163, "e,f,g", 0 },
-{ "iat1s2.dd",	0x4800059c, 0xb4000063, "e,f,g", 0 },
-{ "m12tsm.ss",	0x4800041d, 0xb40001e2, "e,f,g", 0 },
-{ "m12tsm.sd",	0x4800049d, 0xb4000162, "e,f,g", 0 },
-{ "m12tsm.dd",	0x4800059d, 0xb4000062, "e,f,g", 0 },
-{ "ia1s2.ss",	0x4800041e, 0xb40001e1, "e,f,g", 0 },
-{ "ia1s2.sd",	0x4800049e, 0xb4000161, "e,f,g", 0 },
-{ "ia1s2.dd",	0x4800059e, 0xb4000061, "e,f,g", 0 },
-{ "m12tsa.ss",	0x4800041f, 0xb40001e0, "e,f,g", 0 },
-{ "m12tsa.sd",	0x4800049f, 0xb4000160, "e,f,g", 0 },
-{ "m12tsa.dd",	0x4800059f, 0xb4000060, "e,f,g", 0 },
-
-/* Floating Point Escape Instruction Format - pfmam.p fsrc1,fsrc2,fdest.  */
-{ "mr2p1.ss",	0x48000000, 0xb40005ff, "e,f,g", 0 },
-{ "mr2p1.sd",	0x48000080, 0xb400057f, "e,f,g", 0 },
-{ "mr2p1.dd",	0x48000180, 0xb400047f, "e,f,g", 0 },
-{ "mr2pt.ss",	0x48000001, 0xb40005fe, "e,f,g", 0 },
-{ "mr2pt.sd",	0x48000081, 0xb400057e, "e,f,g", 0 },
-{ "mr2pt.dd",	0x48000181, 0xb400047e, "e,f,g", 0 },
-{ "mr2mp1.ss",	0x48000002, 0xb40005fd, "e,f,g", 0 },
-{ "mr2mp1.sd",	0x48000082, 0xb400057d, "e,f,g", 0 },
-{ "mr2mp1.dd",	0x48000182, 0xb400047d, "e,f,g", 0 },
-{ "mr2mpt.ss",	0x48000003, 0xb40005fc, "e,f,g", 0 },
-{ "mr2mpt.sd",	0x48000083, 0xb400057c, "e,f,g", 0 },
-{ "mr2mpt.dd",	0x48000183, 0xb400047c, "e,f,g", 0 },
-{ "mi2p1.ss",	0x48000004, 0xb40005fb, "e,f,g", 0 },
-{ "mi2p1.sd",	0x48000084, 0xb400057b, "e,f,g", 0 },
-{ "mi2p1.dd",	0x48000184, 0xb400047b, "e,f,g", 0 },
-{ "mi2pt.ss",	0x48000005, 0xb40005fa, "e,f,g", 0 },
-{ "mi2pt.sd",	0x48000085, 0xb400057a, "e,f,g", 0 },
-{ "mi2pt.dd",	0x48000185, 0xb400047a, "e,f,g", 0 },
-{ "mi2mp1.ss",	0x48000006, 0xb40005f9, "e,f,g", 0 },
-{ "mi2mp1.sd",	0x48000086, 0xb4000579, "e,f,g", 0 },
-{ "mi2mp1.dd",	0x48000186, 0xb4000479, "e,f,g", 0 },
-{ "mi2mpt.ss",	0x48000007, 0xb40005f8, "e,f,g", 0 },
-{ "mi2mpt.sd",	0x48000087, 0xb4000578, "e,f,g", 0 },
-{ "mi2mpt.dd",	0x48000187, 0xb4000478, "e,f,g", 0 },
-{ "mrmt1p2.ss",	0x48000008, 0xb40005f7, "e,f,g", 0 },
-{ "mrmt1p2.sd",	0x48000088, 0xb4000577, "e,f,g", 0 },
-{ "mrmt1p2.dd",	0x48000188, 0xb4000477, "e,f,g", 0 },
-{ "mm12mpm.ss",	0x48000009, 0xb40005f6, "e,f,g", 0 },
-{ "mm12mpm.sd",	0x48000089, 0xb4000576, "e,f,g", 0 },
-{ "mm12mpm.dd",	0x48000189, 0xb4000476, "e,f,g", 0 },
-{ "mrm1p2.ss",	0x4800000a, 0xb40005f5, "e,f,g", 0 },
-{ "mrm1p2.sd",	0x4800008a, 0xb4000575, "e,f,g", 0 },
-{ "mrm1p2.dd",	0x4800018a, 0xb4000475, "e,f,g", 0 },
-{ "mm12ttpm.ss",0x4800000b, 0xb40005f4, "e,f,g", 0 },
-{ "mm12ttpm.sd",0x4800008b, 0xb4000574, "e,f,g", 0 },
-{ "mm12ttpm.dd",0x4800018b, 0xb4000474, "e,f,g", 0 },
-{ "mimt1p2.ss",	0x4800000c, 0xb40005f3, "e,f,g", 0 },
-{ "mimt1p2.sd",	0x4800008c, 0xb4000573, "e,f,g", 0 },
-{ "mimt1p2.dd",	0x4800018c, 0xb4000473, "e,f,g", 0 },
-{ "mm12tpm.ss",	0x4800000d, 0xb40005f2, "e,f,g", 0 },
-{ "mm12tpm.sd",	0x4800008d, 0xb4000572, "e,f,g", 0 },
-{ "mm12tpm.dd",	0x4800018d, 0xb4000472, "e,f,g", 0 },
-{ "mim1p2.ss",	0x4800000e, 0xb40005f1, "e,f,g", 0 },
-{ "mim1p2.sd",	0x4800008e, 0xb4000571, "e,f,g", 0 },
-{ "mim1p2.dd",	0x4800018e, 0xb4000471, "e,f,g", 0 },
-
-/* Floating Point Escape Instruction Format - pfmsm.p fsrc1,fsrc2,fdest.  */
-{ "mr2s1.ss",	0x48000010, 0xb40005ef, "e,f,g", 0 },
-{ "mr2s1.sd",	0x48000090, 0xb400056f, "e,f,g", 0 },
-{ "mr2s1.dd",	0x48000190, 0xb400046f, "e,f,g", 0 },
-{ "mr2st.ss",	0x48000011, 0xb40005ee, "e,f,g", 0 },
-{ "mr2st.sd",	0x48000091, 0xb400056e, "e,f,g", 0 },
-{ "mr2st.dd",	0x48000191, 0xb400046e, "e,f,g", 0 },
-{ "mr2ms1.ss",	0x48000012, 0xb40005ed, "e,f,g", 0 },
-{ "mr2ms1.sd",	0x48000092, 0xb400056d, "e,f,g", 0 },
-{ "mr2ms1.dd",	0x48000192, 0xb400046d, "e,f,g", 0 },
-{ "mr2mst.ss",	0x48000013, 0xb40005ec, "e,f,g", 0 },
-{ "mr2mst.sd",	0x48000093, 0xb400056c, "e,f,g", 0 },
-{ "mr2mst.dd",	0x48000193, 0xb400046c, "e,f,g", 0 },
-{ "mi2s1.ss",	0x48000014, 0xb40005eb, "e,f,g", 0 },
-{ "mi2s1.sd",	0x48000094, 0xb400056b, "e,f,g", 0 },
-{ "mi2s1.dd",	0x48000194, 0xb400046b, "e,f,g", 0 },
-{ "mi2st.ss",	0x48000015, 0xb40005ea, "e,f,g", 0 },
-{ "mi2st.sd",	0x48000095, 0xb400056a, "e,f,g", 0 },
-{ "mi2st.dd",	0x48000195, 0xb400046a, "e,f,g", 0 },
-{ "mi2ms1.ss",	0x48000016, 0xb40005e9, "e,f,g", 0 },
-{ "mi2ms1.sd",	0x48000096, 0xb4000569, "e,f,g", 0 },
-{ "mi2ms1.dd",	0x48000196, 0xb4000469, "e,f,g", 0 },
-{ "mi2mst.ss",	0x48000017, 0xb40005e8, "e,f,g", 0 },
-{ "mi2mst.sd",	0x48000097, 0xb4000568, "e,f,g", 0 },
-{ "mi2mst.dd",	0x48000197, 0xb4000468, "e,f,g", 0 },
-{ "mrmt1s2.ss",	0x48000018, 0xb40005e7, "e,f,g", 0 },
-{ "mrmt1s2.sd",	0x48000098, 0xb4000567, "e,f,g", 0 },
-{ "mrmt1s2.dd",	0x48000198, 0xb4000467, "e,f,g", 0 },
-{ "mm12msm.ss",	0x48000019, 0xb40005e6, "e,f,g", 0 },
-{ "mm12msm.sd",	0x48000099, 0xb4000566, "e,f,g", 0 },
-{ "mm12msm.dd",	0x48000199, 0xb4000466, "e,f,g", 0 },
-{ "mrm1s2.ss",	0x4800001a, 0xb40005e5, "e,f,g", 0 },
-{ "mrm1s2.sd",	0x4800009a, 0xb4000565, "e,f,g", 0 },
-{ "mrm1s2.dd",	0x4800019a, 0xb4000465, "e,f,g", 0 },
-{ "mm12ttsm.ss",0x4800001b, 0xb40005e4, "e,f,g", 0 },
-{ "mm12ttsm.sd",0x4800009b, 0xb4000564, "e,f,g", 0 },
-{ "mm12ttsm.dd",0x4800019b, 0xb4000464, "e,f,g", 0 },
-{ "mimt1s2.ss",	0x4800001c, 0xb40005e3, "e,f,g", 0 },
-{ "mimt1s2.sd",	0x4800009c, 0xb4000563, "e,f,g", 0 },
-{ "mimt1s2.dd",	0x4800019c, 0xb4000463, "e,f,g", 0 },
-{ "mm12tsm.ss",	0x4800001d, 0xb40005e2, "e,f,g", 0 },
-{ "mm12tsm.sd",	0x4800009d, 0xb4000562, "e,f,g", 0 },
-{ "mm12tsm.dd",	0x4800019d, 0xb4000462, "e,f,g", 0 },
-{ "mim1s2.ss",	0x4800001e, 0xb40005e1, "e,f,g", 0 },
-{ "mim1s2.sd",	0x4800009e, 0xb4000561, "e,f,g", 0 },
-{ "mim1s2.dd",	0x4800019e, 0xb4000461, "e,f,g", 0 },
-
-{ "fmul.ss",	0x48000020, 0xb40005df, "e,f,g", 0 },	/* fmul.p fsrc1,fsrc2,fdest */
-{ "fmul.sd",	0x480000a0, 0xb400055f, "e,f,g", 0 },	/* fmul.p fsrc1,fsrc2,fdest */
-{ "fmul.dd",	0x480001a0, 0xb400045f, "e,f,g", 0 },	/* fmul.p fsrc1,fsrc2,fdest */
-{ "pfmul.ss",	0x48000420, 0xb40001df, "e,f,g", 0 },	/* pfmul.p fsrc1,fsrc2,fdest */
-{ "pfmul.sd",	0x480004a0, 0xb400015f, "e,f,g", 0 },	/* pfmul.p fsrc1,fsrc2,fdest */
-{ "pfmul.dd",	0x480005a0, 0xb400005f, "e,f,g", 0 },	/* pfmul.p fsrc1,fsrc2,fdest */
-{ "pfmul3.dd",	0x480005a4, 0xb400005b, "e,f,g", 0 },	/* pfmul3.p fsrc1,fsrc2,fdest */
-{ "fmlow.dd",	0x480001a1, 0xb400045e, "e,f,g", 0 },	/* fmlow.dd fsrc1,fsrc2,fdest */
-{ "frcp.ss",	0x48000022, 0xb40005dd, "f,g", 0 },	/* frcp.p fsrc2,fdest */
-{ "frcp.sd",	0x480000a2, 0xb400055d, "f,g", 0 },	/* frcp.p fsrc2,fdest */
-{ "frcp.dd",	0x480001a2, 0xb400045d, "f,g", 0 },	/* frcp.p fsrc2,fdest */
-{ "frsqr.ss",	0x48000023, 0xb40005dc, "f,g", 0 },	/* frsqr.p fsrc2,fdest */
-{ "frsqr.sd",	0x480000a3, 0xb400055c, "f,g", 0 },	/* frsqr.p fsrc2,fdest */
-{ "frsqr.dd",	0x480001a3, 0xb400045c, "f,g", 0 },	/* frsqr.p fsrc2,fdest */
-{ "fadd.ss",	0x48000030, 0xb40005cf, "e,f,g", 0 },	/* fadd.p fsrc1,fsrc2,fdest */
-{ "fadd.sd",	0x480000b0, 0xb400054f, "e,f,g", 0 },	/* fadd.p fsrc1,fsrc2,fdest */
-{ "fadd.dd",	0x480001b0, 0xb400044f, "e,f,g", 0 },	/* fadd.p fsrc1,fsrc2,fdest */
-{ "pfadd.ss",	0x48000430, 0xb40001cf, "e,f,g", 0 },	/* pfadd.p fsrc1,fsrc2,fdest */
-{ "pfadd.sd",	0x480004b0, 0xb400014f, "e,f,g", 0 },	/* pfadd.p fsrc1,fsrc2,fdest */
-{ "pfadd.dd",	0x480005b0, 0xb400004f, "e,f,g", 0 },	/* pfadd.p fsrc1,fsrc2,fdest */
-{ "fsub.ss",	0x48000031, 0xb40005ce, "e,f,g", 0 },	/* fsub.p fsrc1,fsrc2,fdest */
-{ "fsub.sd",	0x480000b1, 0xb400054e, "e,f,g", 0 },	/* fsub.p fsrc1,fsrc2,fdest */
-{ "fsub.dd",	0x480001b1, 0xb400044e, "e,f,g", 0 },	/* fsub.p fsrc1,fsrc2,fdest */
-{ "pfsub.ss",	0x48000431, 0xb40001ce, "e,f,g", 0 },	/* pfsub.p fsrc1,fsrc2,fdest */
-{ "pfsub.sd",	0x480004b1, 0xb400014e, "e,f,g", 0 },	/* pfsub.p fsrc1,fsrc2,fdest */
-{ "pfsub.dd",	0x480005b1, 0xb400004e, "e,f,g", 0 },	/* pfsub.p fsrc1,fsrc2,fdest */
-{ "fix.sd",	0x480000b2, 0xb400054d, "e,g", 0 },	/* fix.p fsrc1,fdest */
-{ "fix.dd",	0x480001b2, 0xb400044d, "e,g", 0 },	/* fix.p fsrc1,fdest */
-{ "pfix.sd",	0x480004b2, 0xb400014d, "e,g", 0 },	/* pfix.p fsrc1,fdest */
-{ "pfix.dd",	0x480005b2, 0xb400004d, "e,g", 0 },	/* pfix.p fsrc1,fdest */
-{ "famov.ss",	0x48000033, 0xb40005cc, "e,g", 0 },	/* famov.p fsrc1,fdest */
-{ "famov.ds",	0x48000133, 0xb40004cc, "e,g", 0 },	/* famov.p fsrc1,fdest */
-{ "famov.sd",	0x480000b3, 0xb400054c, "e,g", 0 },	/* famov.p fsrc1,fdest */
-{ "famov.dd",	0x480001b3, 0xb400044c, "e,g", 0 },	/* famov.p fsrc1,fdest */
-{ "pfamov.ss",	0x48000433, 0xb40001cc, "e,g", 0 },	/* pfamov.p fsrc1,fdest */
-{ "pfamov.ds",	0x48000533, 0xb40000cc, "e,g", 0 },	/* pfamov.p fsrc1,fdest */
-{ "pfamov.sd",	0x480004b3, 0xb400014c, "e,g", 0 },	/* pfamov.p fsrc1,fdest */
-{ "pfamov.dd",	0x480005b3, 0xb400004c, "e,g", 0 },	/* pfamov.p fsrc1,fdest */
-/* Opcode pfgt has R bit cleared; pfle has R bit set.  */
-{ "pfgt.ss",	0x48000434, 0xb40001cb, "e,f,g", 0 },	/* pfgt.p fsrc1,fsrc2,fdest */
-{ "pfgt.dd",	0x48000534, 0xb40000cb, "e,f,g", 0 },	/* pfgt.p fsrc1,fsrc2,fdest */
-/* Opcode pfgt has R bit cleared; pfle has R bit set.  */
-{ "pfle.ss",	0x480004b4, 0xb400014b, "e,f,g", 0 },	/* pfle.p fsrc1,fsrc2,fdest */
-{ "pfle.dd",	0x480005b4, 0xb400004b, "e,f,g", 0 },	/* pfle.p fsrc1,fsrc2,fdest */
-{ "pfeq.ss",	0x48000435, 0xb40001ca, "e,f,g", 0 },	/* pfeq.p fsrc1,fsrc2,fdest */
-{ "pfeq.dd",	0x48000535, 0xb40000ca, "e,f,g", 0 },	/* pfeq.p fsrc1,fsrc2,fdest */
-{ "ftrunc.sd",	0x480000ba, 0xb4000545, "e,g", 0 },	/* ftrunc.p fsrc1,fdest */
-{ "ftrunc.dd",	0x480001ba, 0xb4000445, "e,g", 0 },	/* ftrunc.p fsrc1,fdest */
-{ "pftrunc.sd",	0x480004ba, 0xb4000145, "e,g", 0 },	/* pftrunc.p fsrc1,fdest */
-{ "pftrunc.dd",	0x480005ba, 0xb4000045, "e,g", 0 },	/* pftrunc.p fsrc1,fdest */
-{ "fxfr",	0x48000040, 0xb40005bf, "e,d", 0 },	/* fxfr fsrc1,idest */
-{ "fiadd.ss",	0x48000049, 0xb40005b6, "e,f,g", 0 },	/* fiadd.w fsrc1,fsrc2,fdest */
-{ "fiadd.dd",	0x480001c9, 0xb4000436, "e,f,g", 0 },	/* fiadd.w fsrc1,fsrc2,fdest */
-{ "pfiadd.ss",	0x48000449, 0xb40001b6, "e,f,g", 0 },	/* pfiadd.w fsrc1,fsrc2,fdest */
-{ "pfiadd.dd",	0x480005c9, 0xb4000036, "e,f,g", 0 },	/* pfiadd.w fsrc1,fsrc2,fdest */
-{ "fisub.ss",	0x4800004d, 0xb40005b2, "e,f,g", 0 },	/* fisub.w fsrc1,fsrc2,fdest */
-{ "fisub.dd",	0x480001cd, 0xb4000432, "e,f,g", 0 },	/* fisub.w fsrc1,fsrc2,fdest */
-{ "pfisub.ss",	0x4800044d, 0xb40001b2, "e,f,g", 0 },	/* pfisub.w fsrc1,fsrc2,fdest */
-{ "pfisub.dd",	0x480005cd, 0xb4000032, "e,f,g", 0 },	/* pfisub.w fsrc1,fsrc2,fdest */
-{ "fzchkl",	0x480001d7, 0xb4000428, "e,f,g", 0 },	/* fzchkl fsrc1,fsrc2,fdest */
-{ "pfzchkl",	0x480005d7, 0xb4000028, "e,f,g", 0 },	/* pfzchkl fsrc1,fsrc2,fdest */
-{ "fzchks",	0x480001df, 0xb4000420, "e,f,g", 0 },	/* fzchks fsrc1,fsrc2,fdest */
-{ "pfzchks",	0x480005df, 0xb4000020, "e,f,g", 0 },	/* pfzchks fsrc1,fsrc2,fdest */
-{ "faddp",	0x480001d0, 0xb400042f, "e,f,g", 0 },	/* faddp fsrc1,fsrc2,fdest */
-{ "pfaddp",	0x480005d0, 0xb400002f, "e,f,g", 0 },	/* pfaddp fsrc1,fsrc2,fdest */
-{ "faddz",	0x480001d1, 0xb400042e, "e,f,g", 0 },	/* faddz fsrc1,fsrc2,fdest */
-{ "pfaddz",	0x480005d1, 0xb400002e, "e,f,g", 0 },	/* pfaddz fsrc1,fsrc2,fdest */
-{ "form",	0x480001da, 0xb4000425, "e,g", 0 },	/* form fsrc1,fdest */
-{ "pform",	0x480005da, 0xb4000025, "e,g", 0 },	/* pform fsrc1,fdest */
-
-/* Floating point pseudo-instructions.  */
-{ "fmov.ss",	0x48000049, 0xb7e005b6, "e,g", 0 },	/* fiadd.ss fsrc1,f0,fdest */
-{ "fmov.dd",	0x480001c9, 0xb7e00436, "e,g", 0 },	/* fiadd.dd fsrc1,f0,fdest */
-{ "fmov.sd",	0x480000b3, 0xb400054c, "e,g", 0 },	/* famov.sd fsrc1,fdest */
-{ "fmov.ds",	0x48000133, 0xb40004cc, "e,g", 0 },	/* famov.ds fsrc1,fdest */
-{ "pfmov.ds",	0x48000533, 0xb40000cc, "e,g", 0 },	/* pfamov.ds fsrc1,fdest */
-{ "pfmov.dd",	0x480005c9, 0xb7e00036, "e,g", 0 },	/* pfiadd.dd fsrc1,f0,fdest */
-{ 0, 0, 0, 0, 0 },
-
-};
-
-#define NUMOPCODES ((sizeof i860_opcodes)/(sizeof i860_opcodes[0]))
-
-
diff --git a/include/opcode/i960.h b/include/opcode/i960.h
deleted file mode 100644
index 2c7193c..0000000
--- a/include/opcode/i960.h
+++ /dev/null
@@ -1,525 +0,0 @@
-/* Basic 80960 instruction formats.
-
-   Copyright (C) 2001-2018 Free Software Foundation, Inc.
-   
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 3, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 51 Franklin Street - Fifth Floor,
-   Boston, MA 02110-1301, USA.  */
- 
-/* The 'COJ' instructions are actually COBR instructions with the 'b' in
-   the mnemonic replaced by a 'j';  they are ALWAYS "de-optimized" if
-   necessary: if the displacement will not fit in 13 bits, the assembler will
-   replace them with the corresponding compare and branch instructions.
- 
-   All of the 'MEMn' instructions are the same format; the 'n' in the name
-   indicates the default index scale factor (the size of the datum operated on).
- 
-   The FBRA formats are not actually an instruction format.  They are the
-   "convenience directives" for branching on floating-point comparisons,
-   each of which generates 2 instructions (a 'bno' and one other branch).
- 
-   The CALLJ format is not actually an instruction format.  It indicates that
-   the instruction generated (a CTRL-format 'call') should have its relocation
-   specially flagged for link-time replacement with a 'bal' or 'calls' if
-   appropriate.  */ 
-
-#define CTRL	0
-#define COBR	1
-#define COJ	2
-#define REG	3
-#define MEM1	4
-#define MEM2	5
-#define MEM4	6
-#define MEM8	7
-#define MEM12	8
-#define MEM16	9
-#define FBRA	10
-#define CALLJ	11
-
-/* Masks for the mode bits in REG format instructions */
-#define M1		0x0800
-#define M2		0x1000
-#define M3		0x2000
-
-/* Generate the 12-bit opcode for a REG format instruction by placing the 
- * high 8 bits in instruction bits 24-31, the low 4 bits in instruction bits
- * 7-10.
- */
-
-#define REG_OPC(opc)	((opc & 0xff0) << 20) | ((opc & 0xf) << 7)
-
-/* Generate a template for a REG format instruction:  place the opcode bits
- * in the appropriate fields and OR in mode bits for the operands that will not
- * be used.  I.e.,
- *		set m1=1, if src1 will not be used
- *		set m2=1, if src2 will not be used
- *		set m3=1, if dst  will not be used
- *
- * Setting the "unused" mode bits to 1 speeds up instruction execution(!).
- * The information is also useful to us because some 1-operand REG instructions
- * use the src1 field, others the dst field; and some 2-operand REG instructions
- * use src1/src2, others src1/dst.  The set mode bits enable us to distinguish.
- */
-#define R_0(opc)	( REG_OPC(opc) | M1 | M2 | M3 )	/* No operands      */
-#define R_1(opc)	( REG_OPC(opc) | M2 | M3 )	/* 1 operand: src1  */
-#define R_1D(opc)	( REG_OPC(opc) | M1 | M2 )	/* 1 operand: dst   */
-#define R_2(opc)	( REG_OPC(opc) | M3 )		/* 2 ops: src1/src2 */
-#define R_2D(opc)	( REG_OPC(opc) | M2 )		/* 2 ops: src1/dst  */
-#define R_3(opc)	( REG_OPC(opc) )		/* 3 operands       */
-
-/* DESCRIPTOR BYTES FOR REGISTER OPERANDS
- *
- * Interpret names as follows:
- *	R:   global or local register only
- *	RS:  global, local, or (if target allows) special-function register only
- *	RL:  global or local register, or integer literal
- *	RSL: global, local, or (if target allows) special-function register;
- *		or integer literal
- *	F:   global, local, or floating-point register
- *	FL:  global, local, or floating-point register; or literal (including
- *		floating point)
- *
- * A number appended to a name indicates that registers must be aligned,
- * as follows:
- *	2: register number must be multiple of 2
- *	4: register number must be multiple of 4
- */
-
-#define SFR	0x10		/* Mask for the "sfr-OK" bit */
-#define LIT	0x08		/* Mask for the "literal-OK" bit */
-#define FP	0x04		/* Mask for "floating-point-OK" bit */
-
-/* This macro ors the bits together.  Note that 'align' is a mask
- * for the low 0, 1, or 2 bits of the register number, as appropriate.
- */
-#define OP(align,lit,fp,sfr)	( align | lit | fp | sfr )
-
-#define R	OP( 0, 0,   0,  0   )
-#define RS	OP( 0, 0,   0,  SFR )
-#define RL	OP( 0, LIT, 0,  0   )
-#define RSL	OP( 0, LIT, 0,  SFR )
-#define F	OP( 0, 0,   FP, 0   )
-#define FL	OP( 0, LIT, FP, 0   )
-#define R2	OP( 1, 0,   0,  0   )
-#define RL2	OP( 1, LIT, 0,  0   )
-#define F2	OP( 1, 0,   FP, 0   )
-#define FL2	OP( 1, LIT, FP, 0   )
-#define R4	OP( 3, 0,   0,  0   )
-#define RL4	OP( 3, LIT, 0,  0   )
-#define F4	OP( 3, 0,   FP, 0   )
-#define FL4	OP( 3, LIT, FP, 0   )
-
-#define M	0x7f	/* Memory operand (MEMA & MEMB format instructions) */
-
-/* Macros to extract info from the register operand descriptor byte 'od'.
- */
-#define SFR_OK(od)	(od & SFR)	/* TRUE if sfr operand allowed */
-#define LIT_OK(od)	(od & LIT)	/* TRUE if literal operand allowed */
-#define FP_OK(od)	(od & FP)	/* TRUE if floating-point op allowed */
-#define REG_ALIGN(od,n)	((od & 0x3 & n) == 0)
-					/* TRUE if reg #n is properly aligned */
-#define MEMOP(od)	(od == M)	/* TRUE if operand is a memory operand*/
-
-/* Description of a single i80960 instruction */
-struct i960_opcode {
-	long opcode;	/* 32 bits, constant fields filled in, rest zeroed */
-	const char *name;	/* Assembler mnemonic				   */
-	short iclass;	/* Class: see #defines below			   */
-	char format;	/* REG, COBR, CTRL, MEMn, COJ, FBRA, or CALLJ	   */
-	char num_ops;	/* Number of operands				   */
-	char operand[3];/* Operand descriptors; same order as assembler instr */
-};
-
-/* Classes of 960 instructions:
- *	- each instruction falls into one class.
- *	- each target architecture supports one or more classes.
- *
- * EACH CONSTANT MUST CONTAIN 1 AND ONLY 1 SET BIT!:  see targ_has_iclass().
- */
-#define I_BASE	0x01	/* 80960 base instruction set	*/
-#define I_CX	0x02	/* 80960Cx instruction		*/
-#define I_DEC	0x04	/* Decimal instruction		*/
-#define I_FP	0x08	/* Floating point instruction	*/
-#define I_KX	0x10	/* 80960Kx instruction		*/
-#define I_MIL	0x20	/* Military instruction		*/
-#define I_CASIM	0x40	/* CA simulator instruction	*/
-#define I_CX2	0x80	/* Cx/Jx/Hx instructions	*/
-#define I_JX	0x100	/* Jx/Hx instruction		*/
-#define I_HX	0x200	/* Hx instructions		*/
-
-/******************************************************************************
- *
- *		TABLE OF i960 INSTRUCTION DESCRIPTIONS
- *
- ******************************************************************************/
-
-const struct i960_opcode i960_opcodes[] = {
-
-	/* if a CTRL instruction has an operand, it's always a displacement */
-
-	/* callj default=='call' */
-	{ 0x09000000,	"callj",	I_BASE,	CALLJ, 	1, { 0, 0, 0 } },
-	{ 0x08000000,	"b",		I_BASE,	CTRL, 	1, { 0, 0, 0 } },
-	{ 0x09000000,	"call",		I_BASE,	CTRL, 	1, { 0, 0, 0 } },
-	{ 0x0a000000,	"ret",		I_BASE,	CTRL, 	0, { 0, 0, 0 } },
-	{ 0x0b000000,	"bal",		I_BASE,	CTRL, 	1, { 0, 0, 0 } },
-	{ 0x10000000,	"bno",		I_BASE,	CTRL, 	1, { 0, 0, 0 } },
-	/* bf same as bno */
-	{ 0x10000000,	"bf",		I_BASE,	CTRL, 	1, { 0, 0, 0 } },
-	/* bru same as bno */
-	{ 0x10000000,	"bru",		I_BASE,	CTRL, 	1, { 0, 0, 0 } },
-	{ 0x11000000,	"bg",		I_BASE,	CTRL, 	1, { 0, 0, 0 } },
-	/* brg same as bg */
-	{ 0x11000000,	"brg",		I_BASE,	CTRL, 	1, { 0, 0, 0 } },
-	{ 0x12000000,	"be",		I_BASE,	CTRL, 	1, { 0, 0, 0 } },
-	/* bre same as be */
-	{ 0x12000000,	"bre",		I_BASE,	CTRL, 	1, { 0, 0, 0 } },
-	{ 0x13000000,	"bge",		I_BASE,	CTRL, 	1, { 0, 0, 0 } },
-	/* brge same as bge */
-	{ 0x13000000,	"brge",		I_BASE,	CTRL, 	1, { 0, 0, 0 } },
-	{ 0x14000000,	"bl",		I_BASE,	CTRL, 	1, { 0, 0, 0 } },
-	/* brl same as bl */
-	{ 0x14000000,	"brl",		I_BASE,	CTRL, 	1, { 0, 0, 0 } },
-	{ 0x15000000,	"bne",		I_BASE,	CTRL, 	1, { 0, 0, 0 } },
-	/* brlg same as bne */
-	{ 0x15000000,	"brlg",		I_BASE,	CTRL, 	1, { 0, 0, 0 } },
-	{ 0x16000000,	"ble",		I_BASE,	CTRL, 	1, { 0, 0, 0 } },
-	/* brle same as ble */
-	{ 0x16000000,	"brle",		I_BASE,	CTRL, 	1, { 0, 0, 0 } },
-	{ 0x17000000,	"bo",		I_BASE,	CTRL, 	1, { 0, 0, 0 } },
-	/* bt same as bo */
-	{ 0x17000000,	"bt",		I_BASE,	CTRL, 	1, { 0, 0, 0 } },
-	/* bro same as bo */
-	{ 0x17000000,	"bro",		I_BASE,	CTRL, 	1, { 0, 0, 0 } },
-	{ 0x18000000,	"faultno",	I_BASE,	CTRL, 	0, { 0, 0, 0 } },
-	/* faultf same as faultno */
-	{ 0x18000000,	"faultf",	I_BASE,	CTRL, 	0, { 0, 0, 0 } },
-	{ 0x19000000,	"faultg",	I_BASE,	CTRL, 	0, { 0, 0, 0 } },
-	{ 0x1a000000,	"faulte",	I_BASE,	CTRL, 	0, { 0, 0, 0 } },
-	{ 0x1b000000,	"faultge",	I_BASE,	CTRL, 	0, { 0, 0, 0 } },
-	{ 0x1c000000,	"faultl",	I_BASE,	CTRL, 	0, { 0, 0, 0 } },
-	{ 0x1d000000,	"faultne",	I_BASE,	CTRL, 	0, { 0, 0, 0 } },
-	{ 0x1e000000,	"faultle",	I_BASE,	CTRL, 	0, { 0, 0, 0 } },
-	{ 0x1f000000,	"faulto",	I_BASE,	CTRL, 	0, { 0, 0, 0 } },
-	/* faultt syn for faulto */
-	{ 0x1f000000,	"faultt",	I_BASE,	CTRL, 	0, { 0, 0, 0 } },
-
-	{ 0x01000000,	"syscall",	I_CASIM,CTRL, 	0, { 0, 0, 0 } },
-
-	/* If a COBR (or COJ) has 3 operands, the last one is always a
-	 * displacement and does not appear explicitly in the table.
-	 */
-
-	{ 0x20000000,	"testno",	I_BASE,	COBR,	1, { R, 0, 0 }	},
-	{ 0x21000000,	"testg",	I_BASE,	COBR,	1, { R, 0, 0 }	},
-	{ 0x22000000,	"teste",	I_BASE,	COBR,	1, { R, 0, 0 }	},
-	{ 0x23000000,	"testge",	I_BASE,	COBR,	1, { R, 0, 0 }	},
-	{ 0x24000000,	"testl",	I_BASE,	COBR,	1, { R, 0, 0 }	},
-	{ 0x25000000,	"testne",	I_BASE,	COBR,	1, { R, 0, 0 }	},
-	{ 0x26000000,	"testle",	I_BASE,	COBR,	1, { R, 0, 0 }	},
-	{ 0x27000000,	"testo",	I_BASE,	COBR,	1, { R, 0, 0 }	},
-	{ 0x30000000,	"bbc",		I_BASE,	COBR,	3, { RL, RS, 0 } },
-	{ 0x31000000,	"cmpobg",	I_BASE,	COBR,	3, { RL, RS, 0 } },
-	{ 0x32000000,	"cmpobe",	I_BASE,	COBR,	3, { RL, RS, 0 } },
-	{ 0x33000000,	"cmpobge",	I_BASE,	COBR,	3, { RL, RS, 0 } },
-	{ 0x34000000,	"cmpobl",	I_BASE,	COBR,	3, { RL, RS, 0 } },
-	{ 0x35000000,	"cmpobne",	I_BASE,	COBR,	3, { RL, RS, 0 } },
-	{ 0x36000000,	"cmpoble",	I_BASE,	COBR,	3, { RL, RS, 0 } },
-	{ 0x37000000,	"bbs",		I_BASE,	COBR,	3, { RL, RS, 0 } },
-	{ 0x38000000,	"cmpibno",	I_BASE,	COBR,	3, { RL, RS, 0 } },
-	{ 0x39000000,	"cmpibg",	I_BASE,	COBR,	3, { RL, RS, 0 } },
-	{ 0x3a000000,	"cmpibe",	I_BASE,	COBR,	3, { RL, RS, 0 } },
-	{ 0x3b000000,	"cmpibge",	I_BASE,	COBR,	3, { RL, RS, 0 } },
-	{ 0x3c000000,	"cmpibl",	I_BASE,	COBR,	3, { RL, RS, 0 } },
-	{ 0x3d000000,	"cmpibne",	I_BASE,	COBR,	3, { RL, RS, 0 } },
-	{ 0x3e000000,	"cmpible",	I_BASE,	COBR,	3, { RL, RS, 0 } },
-	{ 0x3f000000,	"cmpibo",	I_BASE,	COBR,	3, { RL, RS, 0 } },
-	{ 0x31000000,	"cmpojg",	I_BASE,	COJ,	3, { RL, RS, 0 } },
-	{ 0x32000000,	"cmpoje",	I_BASE,	COJ,	3, { RL, RS, 0 } },
-	{ 0x33000000,	"cmpojge",	I_BASE,	COJ,	3, { RL, RS, 0 } },
-	{ 0x34000000,	"cmpojl",	I_BASE,	COJ,	3, { RL, RS, 0 } },
-	{ 0x35000000,	"cmpojne",	I_BASE,	COJ,	3, { RL, RS, 0 } },
-	{ 0x36000000,	"cmpojle",	I_BASE,	COJ,	3, { RL, RS, 0 } },
-	{ 0x38000000,	"cmpijno",	I_BASE,	COJ,	3, { RL, RS, 0 } },
-	{ 0x39000000,	"cmpijg",	I_BASE,	COJ,	3, { RL, RS, 0 } },
-	{ 0x3a000000,	"cmpije",	I_BASE,	COJ,	3, { RL, RS, 0 } },
-	{ 0x3b000000,	"cmpijge",	I_BASE,	COJ,	3, { RL, RS, 0 } },
-	{ 0x3c000000,	"cmpijl",	I_BASE,	COJ,	3, { RL, RS, 0 } },
-	{ 0x3d000000,	"cmpijne",	I_BASE,	COJ,	3, { RL, RS, 0 } },
-	{ 0x3e000000,	"cmpijle",	I_BASE,	COJ,	3, { RL, RS, 0 } },
-	{ 0x3f000000,	"cmpijo",	I_BASE,	COJ,	3, { RL, RS, 0 } },
-
-	{ 0x80000000,	"ldob",		I_BASE,	MEM1,	2, { M,  R,  0 } },
-	{ 0x82000000,	"stob",		I_BASE,	MEM1,	2, { R,  M,  0 } },
-	{ 0x84000000,	"bx",		I_BASE,	MEM1,	1, { M,  0,  0 } },
-	{ 0x85000000,	"balx",		I_BASE,	MEM1,	2, { M,  R,  0 } },
-	{ 0x86000000,	"callx",	I_BASE,	MEM1,	1, { M,  0,  0 } },
-	{ 0x88000000,	"ldos",		I_BASE,	MEM2,	2, { M,  R,  0 } },
-	{ 0x8a000000,	"stos",		I_BASE,	MEM2,	2, { R,  M,  0 } },
-	{ 0x8c000000,	"lda",		I_BASE,	MEM1,	2, { M,  R,  0 } },
-	{ 0x90000000,	"ld",		I_BASE,	MEM4,	2, { M,  R,  0 } },
-	{ 0x92000000,	"st",		I_BASE,	MEM4,	2, { R,  M,  0 } },
-	{ 0x98000000,	"ldl",		I_BASE,	MEM8,	2, { M,  R2, 0 } },
-	{ 0x9a000000,	"stl",		I_BASE,	MEM8,	2, { R2, M,  0 } },
-	{ 0xa0000000,	"ldt",		I_BASE,	MEM12,	2, { M,  R4, 0 } },
-	{ 0xa2000000,	"stt",		I_BASE,	MEM12,	2, { R4, M,  0 } },
-	{ 0xb0000000,	"ldq",		I_BASE,	MEM16,	2, { M,  R4, 0 } },
-	{ 0xb2000000,	"stq",		I_BASE,	MEM16,	2, { R4, M,  0 } },
-	{ 0xc0000000,	"ldib",		I_BASE,	MEM1,	2, { M,  R,  0 } },
-	{ 0xc2000000,	"stib",		I_BASE,	MEM1,	2, { R,  M,  0 } },
-	{ 0xc8000000,	"ldis",		I_BASE,	MEM2,	2, { M,  R,  0 } },
-	{ 0xca000000,	"stis",		I_BASE,	MEM2,	2, { R,  M,  0 } },
-
-	{ R_3(0x580),	"notbit",	I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x581),	"and",		I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x582),	"andnot",	I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x583),	"setbit",	I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x584),	"notand",	I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x586),	"xor",		I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x587),	"or",		I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x588),	"nor",		I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x589),	"xnor",		I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_2D(0x58a),	"not",		I_BASE,	REG,	2, { RSL,RS, 0 } },
-	{ R_3(0x58b),	"ornot",	I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x58c),	"clrbit",	I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x58d),	"notor",	I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x58e),	"nand",		I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x58f),	"alterbit",	I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x590),	"addo",		I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x591),	"addi",		I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x592),	"subo",		I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x593),	"subi",		I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x598),	"shro",		I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x59a),	"shrdi",	I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x59b),	"shri",		I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x59c),	"shlo",		I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x59d),	"rotate",	I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x59e),	"shli",		I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_2(0x5a0),	"cmpo",		I_BASE,	REG,	2, { RSL,RSL, 0 } },
-	{ R_2(0x5a1),	"cmpi",		I_BASE,	REG,	2, { RSL,RSL, 0 } },
-	{ R_2(0x5a2),	"concmpo",	I_BASE,	REG,	2, { RSL,RSL, 0 } },
-	{ R_2(0x5a3),	"concmpi",	I_BASE,	REG,	2, { RSL,RSL, 0 } },
-	{ R_3(0x5a4),	"cmpinco",	I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x5a5),	"cmpinci",	I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x5a6),	"cmpdeco",	I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x5a7),	"cmpdeci",	I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_2(0x5ac),	"scanbyte",	I_BASE,	REG,	2, { RSL,RSL, 0 } },
-	{ R_2(0x5ae),	"chkbit",	I_BASE,	REG,	2, { RSL,RSL, 0 } },
-	{ R_3(0x5b0),	"addc",		I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x5b2),	"subc",		I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_2D(0x5cc),	"mov",		I_BASE,	REG,	2, { RSL,RS, 0 } },
-	{ R_2D(0x5dc),	"movl",		I_BASE,	REG,	2, { RL2,R2, 0 } },
-	{ R_2D(0x5ec),	"movt",		I_BASE,	REG,	2, { RL4,R4, 0 } },
-	{ R_2D(0x5fc),	"movq",		I_BASE,	REG,	2, { RL4,R4, 0 } },
-	{ R_3(0x610),	"atmod",	I_BASE,	REG,	3, { RS, RSL,R } },
-	{ R_3(0x612),	"atadd",	I_BASE,	REG,	3, { RS, RSL,RS } },
-	{ R_2D(0x640),	"spanbit",	I_BASE,	REG,	2, { RSL,RS, 0 } },
-	{ R_2D(0x641),	"scanbit",	I_BASE,	REG,	2, { RSL,RS, 0 } },
-	{ R_3(0x645),	"modac",	I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x650),	"modify",	I_BASE,	REG,	3, { RSL,RSL,R } },
-	{ R_3(0x651),	"extract",	I_BASE,	REG,	3, { RSL,RSL,R } },
-	{ R_3(0x654),	"modtc",	I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x655),	"modpc",	I_BASE,	REG,	3, { RSL,RSL,R } },
-	{ R_1(0x660),	"calls",	I_BASE,	REG,	1, { RSL, 0, 0 } },
-	{ R_0(0x66b),	"mark",		I_BASE,	REG,	0, { 0, 0, 0 }	},
-	{ R_0(0x66c),	"fmark",	I_BASE,	REG,	0, { 0, 0, 0 }	},
-	{ R_0(0x66d),	"flushreg",	I_BASE,	REG,	0, { 0, 0, 0 }	},
-	{ R_0(0x66f),	"syncf",	I_BASE,	REG,	0, { 0, 0, 0 }	},
-	{ R_3(0x670),	"emul",		I_BASE,	REG,	3, { RSL,RSL,R2 } },
-	{ R_3(0x671),	"ediv",		I_BASE,	REG,	3, { RSL,RL2,RS } },
-	{ R_2D(0x672),	"cvtadr",	I_CASIM,REG, 	2, { RL, R2, 0 } },
-	{ R_3(0x701),	"mulo",		I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x708),	"remo",		I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x70b),	"divo",		I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x741),	"muli",		I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x748),	"remi",		I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x749),	"modi",		I_BASE,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x74b),	"divi",		I_BASE,	REG,	3, { RSL,RSL,RS } },
-
-	/* Floating-point instructions */
-
-	{ R_2D(0x674),	"cvtir",	I_FP,	REG,	2, { RL, F, 0 } },
-	{ R_2D(0x675),	"cvtilr",	I_FP,	REG,	2, { RL, F, 0 } },
-	{ R_3(0x676),	"scalerl",	I_FP,	REG,	3, { RL, FL2,F2 } },
-	{ R_3(0x677),	"scaler",	I_FP,	REG,	3, { RL, FL, F } },
-	{ R_3(0x680),	"atanr",	I_FP,	REG,	3, { FL, FL, F } },
-	{ R_3(0x681),	"logepr",	I_FP,	REG,	3, { FL, FL, F } },
-	{ R_3(0x682),	"logr",		I_FP,	REG,	3, { FL, FL, F } },
-	{ R_3(0x683),	"remr",		I_FP,	REG,	3, { FL, FL, F } },
-	{ R_2(0x684),	"cmpor",	I_FP,	REG,	2, { FL, FL, 0 } },
-	{ R_2(0x685),	"cmpr",		I_FP,	REG,	2, { FL, FL, 0 } },
-	{ R_2D(0x688),	"sqrtr",	I_FP,	REG,	2, { FL, F, 0 } },
-	{ R_2D(0x689),	"expr",		I_FP,	REG,	2, { FL, F, 0 } },
-	{ R_2D(0x68a),	"logbnr",	I_FP,	REG,	2, { FL, F, 0 } },
-	{ R_2D(0x68b),	"roundr",	I_FP,	REG,	2, { FL, F, 0 } },
-	{ R_2D(0x68c),	"sinr",		I_FP,	REG,	2, { FL, F, 0 } },
-	{ R_2D(0x68d),	"cosr",		I_FP,	REG,	2, { FL, F, 0 } },
-	{ R_2D(0x68e),	"tanr",		I_FP,	REG,	2, { FL, F, 0 } },
-	{ R_1(0x68f),	"classr",	I_FP,	REG,	1, { FL, 0, 0 }	},
-	{ R_3(0x690),	"atanrl",	I_FP,	REG,	3, { FL2,FL2,F2 } },
-	{ R_3(0x691),	"logeprl",	I_FP,	REG,	3, { FL2,FL2,F2 } },
-	{ R_3(0x692),	"logrl",	I_FP,	REG,	3, { FL2,FL2,F2 } },
-	{ R_3(0x693),	"remrl",	I_FP,	REG,	3, { FL2,FL2,F2 } },
-	{ R_2(0x694),	"cmporl",	I_FP,	REG,	2, { FL2,FL2, 0 } },
-	{ R_2(0x695),	"cmprl",	I_FP,	REG,	2, { FL2,FL2, 0 } },
-	{ R_2D(0x698),	"sqrtrl",	I_FP,	REG,	2, { FL2,F2, 0 } },
-	{ R_2D(0x699),	"exprl",	I_FP,	REG,	2, { FL2,F2, 0 } },
-	{ R_2D(0x69a),	"logbnrl",	I_FP,	REG,	2, { FL2,F2, 0 } },
-	{ R_2D(0x69b),	"roundrl",	I_FP,	REG,	2, { FL2,F2, 0 } },
-	{ R_2D(0x69c),	"sinrl",	I_FP,	REG,	2, { FL2,F2, 0 } },
-	{ R_2D(0x69d),	"cosrl",	I_FP,	REG,	2, { FL2,F2, 0 } },
-	{ R_2D(0x69e),	"tanrl",	I_FP,	REG,	2, { FL2,F2, 0 } },
-	{ R_1(0x69f),	"classrl",	I_FP,	REG,	1, { FL2, 0, 0 } },
-	{ R_2D(0x6c0),	"cvtri",	I_FP,	REG,	2, { FL, R, 0 } },
-	{ R_2D(0x6c1),	"cvtril",	I_FP,	REG,	2, { FL, R2, 0 } },
-	{ R_2D(0x6c2),	"cvtzri",	I_FP,	REG,	2, { FL, R, 0 } },
-	{ R_2D(0x6c3),	"cvtzril",	I_FP,	REG,	2, { FL, R2, 0 } },
-	{ R_2D(0x6c9),	"movr",		I_FP,	REG,	2, { FL, F, 0 } },
-	{ R_2D(0x6d9),	"movrl",	I_FP,	REG,	2, { FL2,F2, 0 } },
-	{ R_2D(0x6e1),	"movre",	I_FP,	REG,	2, { FL4,F4, 0 } },
-	{ R_3(0x6e2),	"cpysre",	I_FP,	REG,	3, { FL4,FL4,F4 } },
-	{ R_3(0x6e3),	"cpyrsre",	I_FP,	REG,	3, { FL4,FL4,F4 } },
-	{ R_3(0x78b),	"divr",		I_FP,	REG,	3, { FL, FL, F } },
-	{ R_3(0x78c),	"mulr",		I_FP,	REG,	3, { FL, FL, F } },
-	{ R_3(0x78d),	"subr",		I_FP,	REG,	3, { FL, FL, F } },
-	{ R_3(0x78f),	"addr",		I_FP,	REG,	3, { FL, FL, F } },
-	{ R_3(0x79b),	"divrl",	I_FP,	REG,	3, { FL2,FL2,F2 } },
-	{ R_3(0x79c),	"mulrl",	I_FP,	REG,	3, { FL2,FL2,F2 } },
-	{ R_3(0x79d),	"subrl",	I_FP,	REG,	3, { FL2,FL2,F2 } },
-	{ R_3(0x79f),	"addrl",	I_FP,	REG,	3, { FL2,FL2,F2 } },
-
-	/* These are the floating point branch instructions.  Each actually
-	 * generates 2 branch instructions:  the first a CTRL instruction with
-	 * the indicated opcode, and the second a 'bno'.
-	 */
-
-	{ 0x12000000,	"brue",		I_FP,	FBRA, 	1, { 0, 0, 0 }	},
-	{ 0x11000000,	"brug",		I_FP,	FBRA, 	1, { 0, 0, 0 }	},
-	{ 0x13000000,	"bruge",	I_FP,	FBRA, 	1, { 0, 0, 0 }	},
-	{ 0x14000000,	"brul",		I_FP,	FBRA, 	1, { 0, 0, 0 }	},
-	{ 0x16000000,	"brule",	I_FP,	FBRA, 	1, { 0, 0, 0 }	},
-	{ 0x15000000,	"brulg",	I_FP,	FBRA, 	1, { 0, 0, 0 }	},
-
-
-	/* Decimal instructions */
-
-	{ R_3(0x642),	"daddc",	I_DEC,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x643),	"dsubc",	I_DEC,	REG,	3, { RSL,RSL,RS } },
-	{ R_2D(0x644),	"dmovt",	I_DEC,	REG,	2, { RSL,RS, 0 } },
-
-
-	/* KX extensions */
-
-	{ R_2(0x600),	"synmov",	I_KX,	REG,	2, { R,  R, 0 } },
-	{ R_2(0x601),	"synmovl",	I_KX,	REG,	2, { R,  R, 0 } },
-	{ R_2(0x602),	"synmovq",	I_KX,	REG,	2, { R,  R, 0 } },
-	{ R_2D(0x615),	"synld",	I_KX,	REG,	2, { R,  R, 0 } },
-
-
-	/* MC extensions */
-
-	{ R_3(0x603),	"cmpstr",	I_MIL,	REG,	3, { R,  R,  RL } },
-	{ R_3(0x604),	"movqstr",	I_MIL,	REG,	3, { R,  R,  RL } },
-	{ R_3(0x605),	"movstr",	I_MIL,	REG,	3, { R,  R,  RL } },
-	{ R_2D(0x613),	"inspacc",	I_MIL,	REG,	2, { R,  R, 0 } },
-	{ R_2D(0x614),	"ldphy",	I_MIL,	REG,	2, { R,  R, 0 } },
-	{ R_3(0x617),	"fill",		I_MIL,	REG,	3, { R,  RL, RL } },
-	{ R_2D(0x646),	"condrec",	I_MIL,	REG,	2, { R,  R, 0 } },
-	{ R_2D(0x656),	"receive",	I_MIL,	REG,	2, { R,  R, 0 } },
-	{ R_3(0x662),	"send",		I_MIL,	REG,	3, { R,  RL, R } },
-	{ R_1(0x663),	"sendserv",	I_MIL,	REG,	1, { R, 0, 0 }	},
-	{ R_1(0x664),	"resumprcs",	I_MIL,	REG,	1, { R, 0, 0 }	},
-	{ R_1(0x665),	"schedprcs",	I_MIL,	REG,	1, { R, 0, 0 }	},
-	{ R_0(0x666),	"saveprcs",	I_MIL,	REG,	0, { 0, 0, 0 }	},
-	{ R_1(0x668),	"condwait",	I_MIL,	REG,	1, { R, 0, 0 }	},
-	{ R_1(0x669),	"wait",		I_MIL,	REG,	1, { R, 0, 0 }	},
-	{ R_1(0x66a),	"signal",	I_MIL,	REG,	1, { R, 0, 0 }	},
-	{ R_1D(0x673),	"ldtime",	I_MIL,	REG,	1, { R2, 0, 0 }	},
-
-
-	/* CX extensions */
-
-	{ R_3(0x5d8),	"eshro",	I_CX2,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x630),	"sdma",		I_CX,	REG,	3, { RSL,RSL,RL } },
-	{ R_3(0x631),	"udma",		I_CX,	REG,	0, { 0, 0, 0 }	},
-	{ R_3(0x659),	"sysctl",	I_CX2,	REG,	3, { RSL,RSL,RL } },
-
-
-	/* Jx extensions.  */
-	{ R_3(0x780),	"addono",	I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x790),	"addog",	I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x7a0),	"addoe",	I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x7b0),	"addoge",	I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x7c0),	"addol",	I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x7d0),	"addone",	I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x7e0),	"addole",	I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x7f0),	"addoo",	I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x781),	"addino",	I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x791),	"addig",	I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x7a1),	"addie",	I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x7b1),	"addige",	I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x7c1),	"addil",	I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x7d1),	"addine",	I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x7e1),	"addile",	I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x7f1),	"addio",	I_JX,	REG,	3, { RSL,RSL,RS } },
-
-	{ R_2D(0x5ad),	"bswap",	I_JX,	REG,	2, { RSL, RS, 0 } },
-
-	{ R_2(0x594),	"cmpob",	I_JX,	REG,	2, { RSL,RSL, 0 } },
-	{ R_2(0x595),	"cmpib",	I_JX,	REG,	2, { RSL,RSL, 0 } },
-	{ R_2(0x596),	"cmpos",	I_JX,	REG,	2, { RSL,RSL, 0 } },
-	{ R_2(0x597),	"cmpis",	I_JX,	REG,	2, { RSL,RSL, 0 } },
-
-	{ R_3(0x784),	"selno",	I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x794),	"selg",		I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x7a4),	"sele",		I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x7b4),	"selge",	I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x7c4),	"sell",		I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x7d4),	"selne",	I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x7e4),	"selle",	I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x7f4),	"selo",		I_JX,	REG,	3, { RSL,RSL,RS } },
-
-	{ R_3(0x782),	"subono",	I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x792),	"subog",	I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x7a2),	"suboe",	I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x7b2),	"suboge",	I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x7c2),	"subol",	I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x7d2),	"subone",	I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x7e2),	"subole",	I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x7f2),	"suboo",	I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x783),	"subino",	I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x793),	"subig",	I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x7a3),	"subie",	I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x7b3),	"subige",	I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x7c3),	"subil",	I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x7d3),	"subine",	I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x7e3),	"subile",	I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_3(0x7f3),	"subio",	I_JX,	REG,	3, { RSL,RSL,RS } },
-
-	{ R_3(0x65c),	"dcctl",	I_JX,	REG,	3, { RSL,RSL,RL } },
-	{ R_3(0x65b),	"icctl",	I_JX,	REG,	3, { RSL,RSL,RS } },
-	{ R_2D(0x658),	"intctl",	I_JX,	REG,	2, { RSL, RS, 0 } },
-	{ R_0(0x5b4),	"intdis",	I_JX,	REG,	0, {   0,  0, 0 } },
-	{ R_0(0x5b5),	"inten",	I_JX,	REG,	0, {   0,  0, 0 } },
-	{ R_0(0x65d),	"halt",		I_JX,	REG,	1, { RSL,  0, 0 } },
-
-	/* Hx extensions.  */
-	{ 0xac000000,	"dcinva",	I_HX,	MEM1,	1, {   M,  0, 0 } },
-
-	/* END OF TABLE */
-
-	{ 0,		NULL,		0,	0,	0, { 0, 0, 0 }	}
-};
-
- /* end of i960-opcode.h */
diff --git a/ld/ChangeLog b/ld/ChangeLog
index 08c4d0d..f8260c0 100644
--- a/ld/ChangeLog
+++ b/ld/ChangeLog
@@ -1,5 +1,76 @@
 2018-04-11  Alan Modra  <amodra@gmail.com>
 
+	* emulparams/coff_i860.sh: Delete.
+	* emulparams/elf32_i860.sh: Delete.
+	* emulparams/elf32_i960.sh: Delete.
+	* emulparams/gld960.sh: Delete.
+	* emulparams/gld960coff.sh: Delete.
+	* emulparams/lnk960.sh: Delete.
+	* emultempl/gld960.em: Delete.
+	* emultempl/gld960c.em: Delete.
+	* emultempl/lnk960.em: Delete.
+	* scripttempl/i860coff.sc: Delete.
+	* scripttempl/i960.sc: Delete.
+	* ld.texinfo: Remove i960 support.
+	* Makefile.am: Remove i860 and i960 support.
+	* configure.tgt: Likewise.
+	* testsuite/ld-discard/extern.d: Likewise.
+	* testsuite/ld-discard/start.d: Likewise.
+	* testsuite/ld-discard/static.d: Likewise.
+	* testsuite/ld-elf/compressed1d.d: Likewise.
+	* testsuite/ld-elf/group1.d: Likewise.
+	* testsuite/ld-elf/group3b.d: Likewise.
+	* testsuite/ld-elf/group8a.d: Likewise.
+	* testsuite/ld-elf/group8b.d: Likewise.
+	* testsuite/ld-elf/group9a.d: Likewise.
+	* testsuite/ld-elf/group9b.d: Likewise.
+	* testsuite/ld-elf/linkonce2.d: Likewise.
+	* testsuite/ld-elf/merge.d: Likewise.
+	* testsuite/ld-elf/merge2.d: Likewise.
+	* testsuite/ld-elf/merge3.d: Likewise.
+	* testsuite/ld-elf/orphan-10.d: Likewise.
+	* testsuite/ld-elf/orphan-11.d: Likewise.
+	* testsuite/ld-elf/orphan-12.d: Likewise.
+	* testsuite/ld-elf/orphan-9.d: Likewise.
+	* testsuite/ld-elf/orphan-region.d: Likewise.
+	* testsuite/ld-elf/orphan.d: Likewise.
+	* testsuite/ld-elf/orphan3.d: Likewise.
+	* testsuite/ld-elf/pr12851.d: Likewise.
+	* testsuite/ld-elf/pr12975.d: Likewise.
+	* testsuite/ld-elf/pr13177.d: Likewise.
+	* testsuite/ld-elf/pr13195.d: Likewise.
+	* testsuite/ld-elf/pr17550a.d: Likewise.
+	* testsuite/ld-elf/pr17550b.d: Likewise.
+	* testsuite/ld-elf/pr17550c.d: Likewise.
+	* testsuite/ld-elf/pr17550d.d: Likewise.
+	* testsuite/ld-elf/pr17615.d: Likewise.
+	* testsuite/ld-elf/pr20528a.d: Likewise.
+	* testsuite/ld-elf/pr20528b.d: Likewise.
+	* testsuite/ld-elf/pr21562a.d: Likewise.
+	* testsuite/ld-elf/pr21562b.d: Likewise.
+	* testsuite/ld-elf/pr21562c.d: Likewise.
+	* testsuite/ld-elf/pr21562d.d: Likewise.
+	* testsuite/ld-elf/pr21562i.d: Likewise.
+	* testsuite/ld-elf/pr21562j.d: Likewise.
+	* testsuite/ld-elf/pr21562k.d: Likewise.
+	* testsuite/ld-elf/pr21562l.d: Likewise.
+	* testsuite/ld-elf/pr21562m.d: Likewise.
+	* testsuite/ld-elf/pr21562n.d: Likewise.
+	* testsuite/ld-elf/pr22677.d: Likewise.
+	* testsuite/ld-elf/pr22836-1a.d: Likewise.
+	* testsuite/ld-elf/pr22836-1b.d: Likewise.
+	* testsuite/ld-elf/pr349.d: Likewise.
+	* testsuite/ld-elf/sec-to-seg.exp: Likewise.
+	* testsuite/ld-elf/sec64k.exp: Likewise.
+	* testsuite/ld-elf/warn1.d: Likewise.
+	* testsuite/ld-elf/warn2.d: Likewise.
+	* testsuite/ld-elf/warn3.d: Likewise.
+	* testsuite/lib/ld-lib.exp: Likewise.
+	* Makefile.in: Regenerate.
+	* po/BLD-POTFILES.in: Regenerate.
+
+2018-04-11  Alan Modra  <amodra@gmail.com>
+
 	* testsuite/ld-elf/shared.exp (AFLAGS_PIC): Add -mpic for nds32.
 
 2018-04-09  Alan Modra  <amodra@gmail.com>
diff --git a/ld/Makefile.am b/ld/Makefile.am
index d94fce7..aa1c69d 100644
--- a/ld/Makefile.am
+++ b/ld/Makefile.am
@@ -209,7 +209,6 @@ ALL_EMULATION_SOURCES = \
 	eavrxmega6.c \
 	eavrxmega7.c \
 	eavrtiny.c   \
-	ecoff_i860.c \
 	ecoff_sparc.c \
 	ecrisaout.c \
 	ecriself.c \
@@ -220,8 +219,6 @@ ALL_EMULATION_SOURCES = \
 	ed30velf.c \
 	edelta68.c \
 	eelf32_dlx.c \
-	eelf32_i860.c \
-	eelf32_i960.c \
 	eelf32_sparc.c \
 	eelf32_sparc_sol2.c \
 	eelf32_sparc_vxworks.c \
@@ -297,8 +294,6 @@ ALL_EMULATION_SOURCES = \
 	eelf_i386_vxworks.c \
 	eelf_iamcu.c \
 	eelf_s390.c \
-	egld960.c \
-	egld960coff.c \
 	eh8300.c \
 	eh8300elf.c \
 	eh8300elf_linux.c \
@@ -343,7 +338,6 @@ ALL_EMULATION_SOURCES = \
 	ei386nw.c \
 	ei386pe.c \
 	ei386pe_posix.c \
-	elnk960.c \
 	em32relf.c \
 	em32relf_linux.c \
 	em32rlelf.c \
@@ -927,9 +921,6 @@ eavrtiny.c: $(srcdir)/emulparams/avrtiny.sh \
   $(srcdir)/emultempl/avrelf.em $(ELF_DEPS) $(srcdir)/scripttempl/avr.sc \
   ${GEN_DEPENDS}
 
-ecoff_i860.c: $(srcdir)/emulparams/coff_i860.sh \
-  $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/i860coff.sc ${GEN_DEPENDS}
-
 ecoff_sparc.c: $(srcdir)/emulparams/coff_sparc.sh \
   $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/sparccoff.sc ${GEN_DEPENDS}
 
@@ -960,12 +951,6 @@ edelta68.c: $(srcdir)/emulparams/delta68.sh \
 eelf32_dlx.c: $(srcdir)/emulparams/elf32_dlx.sh \
   $(ELF_GEN_DEPS) $(srcdir)/scripttempl/dlx.sc ${GEN_DEPENDS}
 
-eelf32_i860.c: $(srcdir)/emulparams/elf32_i860.sh \
-  $(ELF_GEN_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
-
-eelf32_i960.c: $(srcdir)/emulparams/elf32_i960.sh \
-  $(ELF_GEN_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
-
 eelf32_sparc.c: $(srcdir)/emulparams/elf32_sparc.sh \
   $(ELF_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 
@@ -1378,12 +1363,6 @@ eelf_iamcu.c: $(srcdir)/emulparams/elf_iamcu.sh \
 eelf_s390.c: $(srcdir)/emulparams/elf_s390.sh \
   $(ELF_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 
-egld960.c: $(srcdir)/emulparams/gld960.sh \
-  $(srcdir)/emultempl/gld960.em $(srcdir)/scripttempl/i960.sc ${GEN_DEPENDS}
-
-egld960coff.c: $(srcdir)/emulparams/gld960coff.sh \
-  $(srcdir)/emultempl/gld960c.em $(srcdir)/scripttempl/i960.sc ${GEN_DEPENDS}
-
 eh8300.c: $(srcdir)/emulparams/h8300.sh \
   $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/h8300.sc ${GEN_DEPENDS}
 
@@ -1533,9 +1512,6 @@ ei386pe_posix.c: $(srcdir)/emulparams/i386pe_posix.sh \
 ei386pep.c: $(srcdir)/emulparams/i386pep.sh \
   $(srcdir)/emultempl/pep.em $(srcdir)/scripttempl/pep.sc ${GEN_DEPENDS}
 
-elnk960.c: $(srcdir)/emulparams/lnk960.sh \
-  $(srcdir)/emultempl/lnk960.em $(srcdir)/scripttempl/i960.sc ${GEN_DEPENDS}
-
 em32relf.c: $(srcdir)/emulparams/m32relf.sh \
   $(ELF_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 
diff --git a/ld/Makefile.in b/ld/Makefile.in
index 704694b..2cd0535 100644
--- a/ld/Makefile.in
+++ b/ld/Makefile.in
@@ -578,7 +578,6 @@ ALL_EMULATION_SOURCES = \
 	eavrxmega6.c \
 	eavrxmega7.c \
 	eavrtiny.c   \
-	ecoff_i860.c \
 	ecoff_sparc.c \
 	ecrisaout.c \
 	ecriself.c \
@@ -589,8 +588,6 @@ ALL_EMULATION_SOURCES = \
 	ed30velf.c \
 	edelta68.c \
 	eelf32_dlx.c \
-	eelf32_i860.c \
-	eelf32_i960.c \
 	eelf32_sparc.c \
 	eelf32_sparc_sol2.c \
 	eelf32_sparc_vxworks.c \
@@ -666,8 +663,6 @@ ALL_EMULATION_SOURCES = \
 	eelf_i386_vxworks.c \
 	eelf_iamcu.c \
 	eelf_s390.c \
-	egld960.c \
-	egld960coff.c \
 	eh8300.c \
 	eh8300elf.c \
 	eh8300elf_linux.c \
@@ -712,7 +707,6 @@ ALL_EMULATION_SOURCES = \
 	ei386nw.c \
 	ei386pe.c \
 	ei386pe_posix.c \
-	elnk960.c \
 	em32relf.c \
 	em32relf_linux.c \
 	em32rlelf.c \
@@ -1188,7 +1182,6 @@ distclean-compile:
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eavrxmega5.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eavrxmega6.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eavrxmega7.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ecoff_i860.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ecoff_sparc.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ecrisaout.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ecriself.Po@am__quote@
@@ -1199,8 +1192,6 @@ distclean-compile:
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ed30velf.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/edelta68.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eelf32_dlx.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eelf32_i860.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eelf32_i960.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eelf32_sparc.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eelf32_sparc_sol2.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eelf32_sparc_vxworks.Po@am__quote@
@@ -1333,8 +1324,6 @@ distclean-compile:
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eelf_x86_64_fbsd.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eelf_x86_64_nacl.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eelf_x86_64_sol2.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/egld960.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/egld960coff.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eh8300.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eh8300elf.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eh8300elf_linux.Po@am__quote@
@@ -1381,7 +1370,6 @@ distclean-compile:
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ei386pe.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ei386pe_posix.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ei386pep.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/elnk960.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/em32relf.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/em32relf_linux.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/em32rlelf.Po@am__quote@
@@ -2491,9 +2479,6 @@ eavrtiny.c: $(srcdir)/emulparams/avrtiny.sh \
   $(srcdir)/emultempl/avrelf.em $(ELF_DEPS) $(srcdir)/scripttempl/avr.sc \
   ${GEN_DEPENDS}
 
-ecoff_i860.c: $(srcdir)/emulparams/coff_i860.sh \
-  $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/i860coff.sc ${GEN_DEPENDS}
-
 ecoff_sparc.c: $(srcdir)/emulparams/coff_sparc.sh \
   $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/sparccoff.sc ${GEN_DEPENDS}
 
@@ -2524,12 +2509,6 @@ edelta68.c: $(srcdir)/emulparams/delta68.sh \
 eelf32_dlx.c: $(srcdir)/emulparams/elf32_dlx.sh \
   $(ELF_GEN_DEPS) $(srcdir)/scripttempl/dlx.sc ${GEN_DEPENDS}
 
-eelf32_i860.c: $(srcdir)/emulparams/elf32_i860.sh \
-  $(ELF_GEN_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
-
-eelf32_i960.c: $(srcdir)/emulparams/elf32_i960.sh \
-  $(ELF_GEN_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
-
 eelf32_sparc.c: $(srcdir)/emulparams/elf32_sparc.sh \
   $(ELF_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 
@@ -2942,12 +2921,6 @@ eelf_iamcu.c: $(srcdir)/emulparams/elf_iamcu.sh \
 eelf_s390.c: $(srcdir)/emulparams/elf_s390.sh \
   $(ELF_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 
-egld960.c: $(srcdir)/emulparams/gld960.sh \
-  $(srcdir)/emultempl/gld960.em $(srcdir)/scripttempl/i960.sc ${GEN_DEPENDS}
-
-egld960coff.c: $(srcdir)/emulparams/gld960coff.sh \
-  $(srcdir)/emultempl/gld960c.em $(srcdir)/scripttempl/i960.sc ${GEN_DEPENDS}
-
 eh8300.c: $(srcdir)/emulparams/h8300.sh \
   $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/h8300.sc ${GEN_DEPENDS}
 
@@ -3097,9 +3070,6 @@ ei386pe_posix.c: $(srcdir)/emulparams/i386pe_posix.sh \
 ei386pep.c: $(srcdir)/emulparams/i386pep.sh \
   $(srcdir)/emultempl/pep.em $(srcdir)/scripttempl/pep.sc ${GEN_DEPENDS}
 
-elnk960.c: $(srcdir)/emulparams/lnk960.sh \
-  $(srcdir)/emultempl/lnk960.em $(srcdir)/scripttempl/i960.sc ${GEN_DEPENDS}
-
 em32relf.c: $(srcdir)/emulparams/m32relf.sh \
   $(ELF_DEPS) $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 
diff --git a/ld/configure.tgt b/ld/configure.tgt
index 7897448..f06ae05 100644
--- a/ld/configure.tgt
+++ b/ld/configure.tgt
@@ -404,17 +404,6 @@ x86_64-*-nacl*)		targ_emul=elf32_x86_64_nacl
 			targ_extra_libpath=$targ_extra_emuls
 			tdir_elf_i386_nacl=`echo ${targ_alias} | sed -e 's/x86_64/i386/'`
 			;;
-i860-*-coff)		targ_emul=coff_i860 ;;
-i860-stardent-sysv4* | i860-stardent-elf*)
-			targ_emul=elf32_i860
-			;;
-i960-wrs-vxworks5.0*)	targ_emul=gld960 ;;
-i960-wrs-vxworks5*)	targ_emul=gld960coff ;;
-i960-wrs-vxworks*)	targ_emul=gld960 ;;
-i960-*-coff)		targ_emul=gld960coff ;;
-i960-intel-nindy)	targ_emul=gld960 ;;
-i960-*-elf*)		targ_emul=elf32_i960
-			;;
 ia16-*-elf*)		targ_emul=elf_i386 targ_extra_emuls=i386msdos ;;
 ia64-*-elf*)		targ_emul=elf64_ia64 ;;
 ia64-*-freebsd* | ia64-*-kfreebsd*-gnu)
diff --git a/ld/emulparams/coff_i860.sh b/ld/emulparams/coff_i860.sh
deleted file mode 100644
index 03b6493..0000000
--- a/ld/emulparams/coff_i860.sh
+++ /dev/null
@@ -1,5 +0,0 @@
-SCRIPT_NAME=i860coff
-OUTPUT_FORMAT="coff-i860"
-PAGE_SIZE=0x1000
-MAXPAGESIZE=0x1000
-ARCH=i860
diff --git a/ld/emulparams/elf32_i860.sh b/ld/emulparams/elf32_i860.sh
deleted file mode 100644
index 482e3d1..0000000
--- a/ld/emulparams/elf32_i860.sh
+++ /dev/null
@@ -1,12 +0,0 @@
-# A work in progress...
-SCRIPT_NAME=elf
-TEMPLATE_NAME=generic
-EXTRA_EM_FILE=genelf
-OUTPUT_FORMAT="elf32-i860-little"
-BIG_OUTPUT_FORMAT="elf32-i860"
-LITTLE_OUTPUT_FORMAT="elf32-i860-little"
-NO_REL_RELOCS=yes
-TEXT_START_ADDR=0
-PAGE_SIZE=0x1000
-MAXPAGESIZE="CONSTANT (MAXPAGESIZE)"
-ARCH=i860
diff --git a/ld/emulparams/elf32_i960.sh b/ld/emulparams/elf32_i960.sh
deleted file mode 100644
index dd05a8f..0000000
--- a/ld/emulparams/elf32_i960.sh
+++ /dev/null
@@ -1,10 +0,0 @@
-SCRIPT_NAME=elf
-TEMPLATE_NAME=generic
-EXTRA_EM_FILE=genelf
-OUTPUT_FORMAT="elf32-i960"
-NO_RELA_RELOCS=yes
-ARCH=i960
-MACHINE=
-TEXT_START_ADDR=0
-EMBEDDED=yes
-MAXPAGESIZE="CONSTANT (MAXPAGESIZE)"
diff --git a/ld/emulparams/gld960.sh b/ld/emulparams/gld960.sh
deleted file mode 100644
index 1e03965..0000000
--- a/ld/emulparams/gld960.sh
+++ /dev/null
@@ -1,7 +0,0 @@
-SCRIPT_NAME=i960
-OUTPUT_FORMAT=""
-TEXT_START_ADDR=0
-TARGET_PAGE_SIZE=128
-ARCH=i960
-TEMPLATE_NAME=gld960
-GLD_STYLE=1
diff --git a/ld/emulparams/gld960coff.sh b/ld/emulparams/gld960coff.sh
deleted file mode 100644
index 65b0dca..0000000
--- a/ld/emulparams/gld960coff.sh
+++ /dev/null
@@ -1,19 +0,0 @@
-SCRIPT_NAME=i960
-OUTPUT_FORMAT=""
-TEXT_START_ADDR=0
-TARGET_PAGE_SIZE=128
-ARCH=i960
-TEMPLATE_NAME=gld960c
-GLD_STYLE=1
-COFF_CTORS='
-	___CTOR_LIST__ = .;
-	LONG((___CTOR_END__ - ___CTOR_LIST__) / 4 - 2)
-	*(.ctors)
-	LONG(0)
-	___CTOR_END__ = .;
-	___DTOR_LIST__ = .;
-	LONG((___DTOR_END__ - ___DTOR_LIST__) / 4 - 2)
-	*(.dtors)
-	LONG(0)
-	___DTOR_END__ = .;
-'
diff --git a/ld/emulparams/lnk960.sh b/ld/emulparams/lnk960.sh
deleted file mode 100644
index 4a650f7..0000000
--- a/ld/emulparams/lnk960.sh
+++ /dev/null
@@ -1,6 +0,0 @@
-SCRIPT_NAME=i960
-OUTPUT_FORMAT=""
-TEXT_START_ADDR=0
-TARGET_PAGE_SIZE=128
-ARCH=i960
-TEMPLATE_NAME=lnk960
diff --git a/ld/emultempl/gld960.em b/ld/emultempl/gld960.em
deleted file mode 100644
index f0f7b04..0000000
--- a/ld/emultempl/gld960.em
+++ /dev/null
@@ -1,155 +0,0 @@
-# This shell script emits a C file. -*- C -*-
-# It does some substitutions.
-fragment <<EOF
-/* Copyright (C) 1991-2018 Free Software Foundation, Inc.
-
-   This file is part of the GNU Binutils.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 3 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
-   MA 02110-1301, USA.  */
-
-
-/* Emulate the Intel's port of  gld.  */
-
-#include "sysdep.h"
-#include "bfd.h"
-#include "libiberty.h"
-#include "bfdlink.h"
-
-#include "ld.h"
-#include "ldmisc.h"
-#include "ldmain.h"
-
-#include "ldexp.h"
-#include "ldlang.h"
-#include "ldfile.h"
-#include "ldemul.h"
-
-static void gld960_before_parse (void)
-{
-  char *env ;
-  env =  getenv("G960LIB");
-  if (env) {
-    ldfile_add_library_path(env, FALSE);
-  }
-  env = getenv("G960BASE");
-  if (env)
-    ldfile_add_library_path (concat (env, "/lib", (const char *) NULL), FALSE);
-  ldfile_output_architecture = bfd_arch_i960;
-}
-
-static void
-gld960_set_output_arch (void)
-{
-  bfd_set_arch_mach (link_info.output_bfd,
-		     ldfile_output_architecture, bfd_mach_i960_core);
-}
-
-static char *
-gld960_choose_target (int argc ATTRIBUTE_UNUSED, char **argv ATTRIBUTE_UNUSED)
-{
-  char *from_outside = getenv(TARGET_ENVIRON);
-  output_filename = "b.out";
-
-  if (from_outside != (char *)NULL)
-    return from_outside;
-
-  return "b.out.little";
-}
-
-static char *
-gld960_get_script (int *isfile)
-EOF
-
-if test x"$COMPILE_IN" = xyes
-then
-# Scripts compiled in.
-
-# sed commands to quote an ld script as a C string.
-sc="-f stringify.sed"
-
-fragment <<EOF
-{
-  *isfile = 0;
-
-  if (bfd_link_relocatable (&link_info) && config.build_constructors)
-    return
-EOF
-sed $sc ldscripts/${EMULATION_NAME}.xu                 >> e${EMULATION_NAME}.c
-echo '  ; else if (bfd_link_relocatable (&link_info)) return' >> e${EMULATION_NAME}.c
-sed $sc ldscripts/${EMULATION_NAME}.xr                 >> e${EMULATION_NAME}.c
-echo '  ; else if (!config.text_read_only) return'     >> e${EMULATION_NAME}.c
-sed $sc ldscripts/${EMULATION_NAME}.xbn                >> e${EMULATION_NAME}.c
-echo '  ; else if (!config.magic_demand_paged) return' >> e${EMULATION_NAME}.c
-sed $sc ldscripts/${EMULATION_NAME}.xn                 >> e${EMULATION_NAME}.c
-echo '  ; else return'                                 >> e${EMULATION_NAME}.c
-sed $sc ldscripts/${EMULATION_NAME}.x                  >> e${EMULATION_NAME}.c
-echo '; }'                                             >> e${EMULATION_NAME}.c
-
-else
-# Scripts read from the filesystem.
-
-fragment <<EOF
-{
-  *isfile = 1;
-
-  if (bfd_link_relocatable (&link_info) && config.build_constructors)
-    return "ldscripts/${EMULATION_NAME}.xu";
-  else if (bfd_link_relocatable (&link_info))
-    return "ldscripts/${EMULATION_NAME}.xr";
-  else if (!config.text_read_only)
-    return "ldscripts/${EMULATION_NAME}.xbn";
-  else if (!config.magic_demand_paged)
-    return "ldscripts/${EMULATION_NAME}.xn";
-  else
-    return "ldscripts/${EMULATION_NAME}.x";
-}
-EOF
-
-fi
-
-fragment <<EOF
-
-struct ld_emulation_xfer_struct ld_gld960_emulation =
-{
-  gld960_before_parse,
-  syslib_default,
-  hll_default,
-  after_parse_default,
-  after_open_default,
-  after_check_relocs_default,
-  after_allocation_default,
-  gld960_set_output_arch,
-  gld960_choose_target,
-  before_allocation_default,
-  gld960_get_script,
-  "960",
-  "",
-  finish_default,
-  NULL,	/* create output section statements */
-  NULL,	/* open dynamic archive */
-  NULL,	/* place orphan */
-  NULL,	/* set symbols */
-  NULL,	/* parse args */
-  NULL,	/* add_options */
-  NULL,	/* handle_option */
-  NULL,	/* unrecognized file */
-  NULL,	/* list options */
-  NULL,	/* recognized file */
-  NULL,	/* find_potential_libraries */
-  NULL,	/* new_vers_pattern */
-  NULL	/* extra_map_file_text */
-};
-EOF
diff --git a/ld/emultempl/gld960c.em b/ld/emultempl/gld960c.em
deleted file mode 100644
index 5507e10..0000000
--- a/ld/emultempl/gld960c.em
+++ /dev/null
@@ -1,168 +0,0 @@
-# This shell script emits a C file. -*- C -*-
-# It does some substitutions.
-fragment <<EOF
-/* Copyright (C) 1991-2018 Free Software Foundation, Inc.
-
-   This file is part of the GNU Binutils.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 3 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
-   MA 02110-1301, USA.  */
-
-
-/* Emulate the Intel's port of gld.  */
-
-#include "sysdep.h"
-#include "bfd.h"
-#include "libiberty.h"
-#include "safe-ctype.h"
-#include "bfdlink.h"
-
-#include "ld.h"
-#include "ldmisc.h"
-#include "ldmain.h"
-
-#include "ldexp.h"
-#include "ldlang.h"
-#include "ldfile.h"
-#include "ldemul.h"
-
-static void gld960_before_parse (void)
-{
-  char *env ;
-  env =  getenv("G960LIB");
-  if (env) {
-    ldfile_add_library_path(env, FALSE);
-  }
-  env = getenv("G960BASE");
-  if (env)
-    ldfile_add_library_path (concat (env, "/lib", (const char *) NULL),
-			     FALSE);
-  ldfile_output_architecture = bfd_arch_i960;
-}
-
-static void
-gld960_set_output_arch (void)
-{
-  if (ldfile_output_machine_name != NULL
-      && *ldfile_output_machine_name != '\0')
-    {
-      char *s, *s1;
-
-      s = concat ("i960:", ldfile_output_machine_name, (char *) NULL);
-      for (s1 = s; *s1 != '\0'; s1++)
-	*s1 = TOLOWER (*s1);
-      ldfile_set_output_arch (s, bfd_arch_unknown);
-      free (s);
-    }
-
-  set_output_arch_default ();
-}
-
-static char *
-gld960_choose_target (int argc ATTRIBUTE_UNUSED, char **argv ATTRIBUTE_UNUSED)
-{
-  char *from_outside = getenv(TARGET_ENVIRON);
-  output_filename = "b.out";
-
-  if (from_outside != (char *)NULL)
-    return from_outside;
-
-  return "coff-Intel-little";
-}
-
-static char *
-gld960_get_script (int *isfile)
-EOF
-
-if test x"$COMPILE_IN" = xyes
-then
-# Scripts compiled in.
-
-# sed commands to quote an ld script as a C string.
-sc="-f stringify.sed"
-
-fragment <<EOF
-{
-  *isfile = 0;
-
-  if (bfd_link_relocatable (&link_info) && config.build_constructors)
-    return
-EOF
-sed $sc ldscripts/${EMULATION_NAME}.xu                 >> e${EMULATION_NAME}.c
-echo '  ; else if (bfd_link_relocatable (&link_info)) return' >> e${EMULATION_NAME}.c
-sed $sc ldscripts/${EMULATION_NAME}.xr                 >> e${EMULATION_NAME}.c
-echo '  ; else if (!config.text_read_only) return'     >> e${EMULATION_NAME}.c
-sed $sc ldscripts/${EMULATION_NAME}.xbn                >> e${EMULATION_NAME}.c
-echo '  ; else if (!config.magic_demand_paged) return' >> e${EMULATION_NAME}.c
-sed $sc ldscripts/${EMULATION_NAME}.xn                 >> e${EMULATION_NAME}.c
-echo '  ; else return'                                 >> e${EMULATION_NAME}.c
-sed $sc ldscripts/${EMULATION_NAME}.x                  >> e${EMULATION_NAME}.c
-echo '; }'                                             >> e${EMULATION_NAME}.c
-
-else
-# Scripts read from the filesystem.
-
-fragment <<EOF
-{
-  *isfile = 1;
-
-  if (bfd_link_relocatable (&link_info) && config.build_constructors)
-    return "ldscripts/${EMULATION_NAME}.xu";
-  else if (bfd_link_relocatable (&link_info))
-    return "ldscripts/${EMULATION_NAME}.xr";
-  else if (!config.text_read_only)
-    return "ldscripts/${EMULATION_NAME}.xbn";
-  else if (!config.magic_demand_paged)
-    return "ldscripts/${EMULATION_NAME}.xn";
-  else
-    return "ldscripts/${EMULATION_NAME}.x";
-}
-EOF
-
-fi
-
-fragment <<EOF
-
-struct ld_emulation_xfer_struct ld_gld960coff_emulation =
-{
-  gld960_before_parse,
-  syslib_default,
-  hll_default,
-  after_parse_default,
-  after_open_default,
-  after_check_relocs_default,
-  after_allocation_default,
-  gld960_set_output_arch,
-  gld960_choose_target,
-  before_allocation_default,
-  gld960_get_script,
-  "960coff",
-  "",
-  finish_default,
-  NULL,	/* create output section statements */
-  NULL,	/* open dynamic archive */
-  NULL,	/* place orphan */
-  NULL,	/* set symbols */
-  NULL,	/* parse args */
-  NULL,	/* add_options */
-  NULL,	/* handle_option */
-  NULL,	/* unrecognized file */
-  NULL,	/* list options */
-  NULL,	/* recognized file */
-  NULL,	/* find_potential_libraries */
-  NULL,	/* new_vers_pattern */
-  NULL	/* extra_map_file_text */
-};
-EOF
diff --git a/ld/emultempl/lnk960.em b/ld/emultempl/lnk960.em
deleted file mode 100644
index b9ba51d..0000000
--- a/ld/emultempl/lnk960.em
+++ /dev/null
@@ -1,349 +0,0 @@
-# This shell script emits a C file. -*- C -*-
-# It does some substitutions.
-fragment <<EOF
-/* intel coff loader emulation specific stuff
-   Copyright (C) 1991-2018 Free Software Foundation, Inc.
-   Written by Steve Chamberlain steve@cygnus.com
-
-   This file is part of the GNU Binutils.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 3 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
-   MA 02110-1301, USA.  */
-
-#include "sysdep.h"
-#include "libiberty.h"
-#include "bfd.h"
-#include "bfdlink.h"
-
-/*#include "archures.h"*/
-#include "ld.h"
-#include "ldmain.h"
-#include "ldmisc.h"
-#include "ldexp.h"
-#include "ldlang.h"
-#include "ldfile.h"
-#include "ldemul.h"
-
-typedef struct lib_list {
-  char *name;
-  struct lib_list *next;
-} lib_list_type;
-
-static lib_list_type *hll_list;
-static lib_list_type **hll_list_tail = &hll_list;
-
-static lib_list_type *syslib_list;
-static lib_list_type **syslib_list_tail = &syslib_list;
-
-
-static void
-append (lib_list_type ***list, char *name)
-{
-  lib_list_type *element = (lib_list_type *) xmalloc (sizeof (lib_list_type));
-
-  element->name = name;
-  element->next = (lib_list_type *) NULL;
-  **list = element;
-  *list = &element->next;
-
-}
-
-static bfd_boolean had_hll = FALSE;
-static bfd_boolean had_hll_name = FALSE;
-
-static void
-lnk960_hll (char *name)
-{
-  had_hll = TRUE;
-  if (name != (char *) NULL)
-    {
-      had_hll_name = TRUE;
-      append (&hll_list_tail, name);
-    }
-}
-
-static void
-lnk960_syslib (char *name)
-{
-  append (&syslib_list_tail, name);
-}
-
-
-static void
-lnk960_before_parse (void)
-{
-  char *name = getenv ("I960BASE");
-
-  if (name == (char *) NULL)
-    {
-      name = getenv("G960BASE");
-      if (name == (char *) NULL)
-	einfo (_("%F%P: I960BASE and G960BASE not set\n"));
-    }
-
-  ldfile_add_library_path (concat (name, "/lib", (const char *) NULL), FALSE);
-  ldfile_output_architecture = bfd_arch_i960;
-  ldfile_output_machine = bfd_mach_i960_core;
-}
-
-static void
-add_on (lib_list_type *list, lang_input_file_enum_type search)
-{
-  while (list)
-    {
-      lang_add_input_file (list->name, search, (char *) NULL);
-      list = list->next;
-    }
-}
-
-static void
-lnk960_after_parse (void)
-{
-  /* If there has been no arch, default to -KB */
-  if (ldfile_output_machine_name[0] == 0)
-    ldfile_add_arch ("KB");
-
-  /* if there has been no hll list then add our own */
-
-  if (had_hll && !had_hll_name)
-    {
-      append (&hll_list_tail, "cg");
-      if (ldfile_output_machine == bfd_mach_i960_ka_sa
-	  || ldfile_output_machine == bfd_mach_i960_ca)
-	append (&hll_list_tail, "fpg");
-    }
-
-  add_on (hll_list, lang_input_file_is_l_enum);
-  add_on (syslib_list, lang_input_file_is_search_file_enum);
-}
-
-/* Create a symbol with the given name with the value of the
-   address of first byte of the section named.
-
-   If the symbol already exists, then do nothing.  */
-
-static void
-symbol_at_beginning_of (const char *secname, const char *name)
-{
-  struct bfd_link_hash_entry *h;
-
-  h = bfd_link_hash_lookup (link_info.hash, name, TRUE, TRUE, TRUE);
-  if (h == NULL)
-    einfo (_("%F%P: bfd_link_hash_lookup failed: %E\n"));
-
-  if (h->type == bfd_link_hash_new
-      || h->type == bfd_link_hash_undefined)
-    {
-      asection *sec;
-
-      h->type = bfd_link_hash_defined;
-
-      sec = bfd_get_section_by_name (link_info.output_bfd, secname);
-      if (sec == NULL)
-	sec = bfd_abs_section_ptr;
-      h->u.def.value = 0;
-      h->u.def.section = sec;
-    }
-}
-
-/* Create a symbol with the given name with the value of the
-   address of the first byte after the end of the section named.
-
-   If the symbol already exists, then do nothing.  */
-
-static void
-symbol_at_end_of (const char *secname, const char *name)
-{
-  struct bfd_link_hash_entry *h;
-
-  h = bfd_link_hash_lookup (link_info.hash, name, TRUE, TRUE, TRUE);
-  if (h == NULL)
-    einfo (_("%F%P: bfd_link_hash_lookup failed: %E\n"));
-
-  if (h->type == bfd_link_hash_new
-      || h->type == bfd_link_hash_undefined)
-    {
-      asection *sec;
-
-      h->type = bfd_link_hash_defined;
-
-      sec = bfd_get_section_by_name (link_info.output_bfd, secname);
-      if (sec == NULL)
-	sec = bfd_abs_section_ptr;
-      h->u.def.value = sec->size;
-      h->u.def.section = sec;
-    }
-}
-
-static void
-lnk960_after_allocation (void)
-{
-  if (!bfd_link_relocatable (&link_info))
-    {
-      symbol_at_end_of (".text", "_etext");
-      symbol_at_end_of (".data", "_edata");
-      symbol_at_beginning_of (".bss", "_bss_start");
-      symbol_at_end_of (".bss", "_end");
-    }
-}
-
-
-static struct
- {
-   unsigned  long number;
-   char *name;
- }
-machine_table[] =
-{
-  { bfd_mach_i960_core	,"CORE" },
-  { bfd_mach_i960_kb_sb	,"KB" },
-  { bfd_mach_i960_kb_sb	,"SB" },
-  { bfd_mach_i960_mc	,"MC" },
-  { bfd_mach_i960_xa	,"XA" },
-  { bfd_mach_i960_ca	,"CA" },
-  { bfd_mach_i960_ka_sa	,"KA" },
-  { bfd_mach_i960_ka_sa	,"SA" },
-  { bfd_mach_i960_jx	,"JX" },
-  { bfd_mach_i960_hx	,"HX" },
-
-  { bfd_mach_i960_core	,"core" },
-  { bfd_mach_i960_kb_sb	,"kb" },
-  { bfd_mach_i960_kb_sb	,"sb" },
-  { bfd_mach_i960_mc	,"mc" },
-  { bfd_mach_i960_xa	,"xa" },
-  { bfd_mach_i960_ca	,"ca" },
-  { bfd_mach_i960_ka_sa	,"ka" },
-  { bfd_mach_i960_ka_sa	,"sa" },
-  { bfd_mach_i960_jx	,"jx" },
-  { bfd_mach_i960_hx	,"hx" },
-
-  { 0, (char *) NULL }
-};
-
-static void
-lnk960_set_output_arch (void)
-{
-  /* Set the output architecture and machine if possible */
-  unsigned int i;
-  ldfile_output_machine = bfd_mach_i960_core;
-  for (i= 0; machine_table[i].name != (char*) NULL; i++)
-    {
-      if (strcmp (ldfile_output_machine_name, machine_table[i].name) == 0)
-	{
-	  ldfile_output_machine = machine_table[i].number;
-	  break;
-	}
-    }
-  bfd_set_arch_mach (link_info.output_bfd, ldfile_output_architecture,
-		     ldfile_output_machine);
-}
-
-static char *
-lnk960_choose_target (int argc ATTRIBUTE_UNUSED, char **argv ATTRIBUTE_UNUSED)
-{
-  char *from_outside = getenv (TARGET_ENVIRON);
-  if (from_outside != (char *) NULL)
-    return from_outside;
-#ifdef LNK960_LITTLE
-  return "coff-Intel-little";
-#else
-  return "coff-Intel-big";
-#endif
-}
-
-static char *
-lnk960_get_script (int *isfile)
-EOF
-
-if test x"$COMPILE_IN" = xyes
-then
-# Scripts compiled in.
-
-# sed commands to quote an ld script as a C string.
-sc="-f stringify.sed"
-
-fragment <<EOF
-{
-  *isfile = 0;
-
-  if (bfd_link_relocatable (&link_info) && config.build_constructors)
-    return
-EOF
-sed $sc ldscripts/${EMULATION_NAME}.xu                 >> e${EMULATION_NAME}.c
-echo '  ; else if (bfd_link_relocatable (&link_info)) return' >> e${EMULATION_NAME}.c
-sed $sc ldscripts/${EMULATION_NAME}.xr                 >> e${EMULATION_NAME}.c
-echo '  ; else if (!config.text_read_only) return'     >> e${EMULATION_NAME}.c
-sed $sc ldscripts/${EMULATION_NAME}.xbn                >> e${EMULATION_NAME}.c
-echo '  ; else if (!config.magic_demand_paged) return' >> e${EMULATION_NAME}.c
-sed $sc ldscripts/${EMULATION_NAME}.xn                 >> e${EMULATION_NAME}.c
-echo '  ; else return'                                 >> e${EMULATION_NAME}.c
-sed $sc ldscripts/${EMULATION_NAME}.x                  >> e${EMULATION_NAME}.c
-echo '; }'                                             >> e${EMULATION_NAME}.c
-
-else
-# Scripts read from the filesystem.
-
-fragment <<EOF
-{
-  *isfile = 1;
-
-  if (bfd_link_relocatable (&link_info) && config.build_constructors)
-    return "ldscripts/${EMULATION_NAME}.xu";
-  else if (bfd_link_relocatable (&link_info))
-    return "ldscripts/${EMULATION_NAME}.xr";
-  else if (!config.text_read_only)
-    return "ldscripts/${EMULATION_NAME}.xbn";
-  else if (!config.magic_demand_paged)
-    return "ldscripts/${EMULATION_NAME}.xn";
-  else
-    return "ldscripts/${EMULATION_NAME}.x";
-}
-EOF
-
-fi
-
-fragment <<EOF
-
-struct ld_emulation_xfer_struct ld_lnk960_emulation =
-{
-  lnk960_before_parse,
-  lnk960_syslib,
-  lnk960_hll,
-  lnk960_after_parse,
-  after_open_default,
-  after_check_relocs_default,
-  lnk960_after_allocation,
-  lnk960_set_output_arch,
-  lnk960_choose_target,
-  before_allocation_default,
-  lnk960_get_script,
-  "lnk960",
-  "",
-  finish_default,
-  NULL,	/* create output section statements */
-  NULL,	/* open dynamic archive */
-  NULL,	/* place orphan */
-  NULL,	/* set symbols */
-  NULL,	/* parse args */
-  NULL,	/* add_options */
-  NULL,	/* handle_option */
-  NULL,	/* unrecognized file */
-  NULL,	/* list options */
-  NULL,	/* recognized file */
-  NULL,	/* find_potential_libraries */
-  NULL,	/* new_vers_pattern */
-  NULL	/* extra_map_file_text */
-};
-EOF
diff --git a/ld/ld.texinfo b/ld/ld.texinfo
index 9425c65..cd7aa6d 100644
--- a/ld/ld.texinfo
+++ b/ld/ld.texinfo
@@ -23,7 +23,6 @@
 @set C6X
 @set H8300
 @set HPPA
-@set I960
 @set M68HC11
 @set M68K
 @set MIPS
@@ -135,9 +134,6 @@ in the section entitled ``GNU Free Documentation License''.
 @ifset Renesas
 * Renesas::                     ld and other Renesas micros
 @end ifset
-@ifset I960
-* i960::                        ld and the Intel 960 family
-@end ifset
 @ifset ARM
 * ARM::				ld and the ARM family
 @end ifset
@@ -381,23 +377,6 @@ it will add a corresponding @code{DT_DEPAUDIT} entry in the output file.
 This option is only meaningful on ELF platforms supporting the rtld-audit
 interface.
 
-@ifset I960
-@cindex architectures
-@kindex -A @var{arch}
-@item -A @var{architecture}
-@kindex --architecture=@var{arch}
-@itemx --architecture=@var{architecture}
-In the current release of @command{ld}, this option is useful only for the
-Intel 960 family of architectures.  In that @command{ld} configuration, the
-@var{architecture} argument identifies the particular architecture in
-the 960 family, enabling some safeguards and modifying the
-archive-library search path.  @xref{i960,,@command{ld} and the Intel 960
-family}, for details.
-
-Future releases of @command{ld} may support similar functionality for
-other architecture families.
-@end ifset
-
 @ifclear SingleFormat
 @cindex binary input format
 @kindex -b @var{format}
@@ -1860,9 +1839,6 @@ This option is only supported on a few targets.
 @ifset H8300
 @xref{H8/300,,@command{ld} and the H8/300}.
 @end ifset
-@ifset I960
-@xref{i960,, @command{ld} and the Intel 960 family}.
-@end ifset
 @ifset XTENSA
 @xref{Xtensa,, @command{ld} and Xtensa Processors}.
 @end ifset
@@ -6562,9 +6538,6 @@ functionality are not listed.
 @ifset H8300
 * H8/300::                      @command{ld} and the H8/300
 @end ifset
-@ifset I960
-* i960::                        @command{ld} and the Intel 960 family
-@end ifset
 @ifset M68HC11
 * M68HC11/68HC12::		@code{ld} and the Motorola 68HC11 and 68HC12 families
 @end ifset
@@ -6690,63 +6663,6 @@ options are required for these chips.
 @end ifset
 @end ifclear
 
-@ifset I960
-@ifclear GENERIC
-@raisesections
-@end ifclear
-
-@node i960
-@section @command{ld} and the Intel 960 Family
-
-@cindex i960 support
-
-You can use the @samp{-A@var{architecture}} command line option to
-specify one of the two-letter names identifying members of the 960
-family; the option specifies the desired output target, and warns of any
-incompatible instructions in the input files.  It also modifies the
-linker's search strategy for archive libraries, to support the use of
-libraries specific to each particular architecture, by including in the
-search loop names suffixed with the string identifying the architecture.
-
-For example, if your @command{ld} command line included @w{@samp{-ACA}} as
-well as @w{@samp{-ltry}}, the linker would look (in its built-in search
-paths, and in any paths you specify with @samp{-L}) for a library with
-the names
-
-@smallexample
-@group
-try
-libtry.a
-tryca
-libtryca.a
-@end group
-@end smallexample
-
-@noindent
-The first two possibilities would be considered in any event; the last
-two are due to the use of @w{@samp{-ACA}}.
-
-You can meaningfully use @samp{-A} more than once on a command line, since
-the 960 architecture family allows combination of target architectures; each
-use will add another pair of name variants to search for when @w{@samp{-l}}
-specifies a library.
-
-@cindex @option{--relax} on i960
-@cindex relaxing on i960
-@command{ld} supports the @samp{--relax} option for the i960 family.  If
-you specify @samp{--relax}, @command{ld} finds all @code{balx} and
-@code{calx} instructions whose targets are within 24 bits, and turns
-them into 24-bit program-counter relative @code{bal} and @code{cal}
-instructions, respectively.  @command{ld} also turns @code{cal}
-instructions into @code{bal} instructions when it determines that the
-target subroutine is a leaf routine (that is, the target subroutine does
-not itself call any subroutines).
-
-@ifclear GENERIC
-@lowersections
-@end ifclear
-@end ifset
-
 @ifset ARM
 @ifclear GENERIC
 @raisesections
diff --git a/ld/po/BLD-POTFILES.in b/ld/po/BLD-POTFILES.in
index 050e3ca..33280c4 100644
--- a/ld/po/BLD-POTFILES.in
+++ b/ld/po/BLD-POTFILES.in
@@ -66,7 +66,6 @@ eavrxmega4.c
 eavrxmega5.c
 eavrxmega6.c
 eavrxmega7.c
-ecoff_i860.c
 ecoff_sparc.c
 ecrisaout.c
 ecriself.c
@@ -77,8 +76,6 @@ ed30v_o.c
 ed30velf.c
 edelta68.c
 eelf32_dlx.c
-eelf32_i860.c
-eelf32_i960.c
 eelf32_sparc.c
 eelf32_sparc_sol2.c
 eelf32_sparc_vxworks.c
@@ -211,8 +208,6 @@ eelf_x86_64_cloudabi.c
 eelf_x86_64_fbsd.c
 eelf_x86_64_nacl.c
 eelf_x86_64_sol2.c
-egld960.c
-egld960coff.c
 eh8300.c
 eh8300elf.c
 eh8300elf_linux.c
@@ -259,7 +254,6 @@ ei386nw.c
 ei386pe.c
 ei386pe_posix.c
 ei386pep.c
-elnk960.c
 em32relf.c
 em32relf_linux.c
 em32rlelf.c
diff --git a/ld/scripttempl/i860coff.sc b/ld/scripttempl/i860coff.sc
deleted file mode 100644
index f809426..0000000
--- a/ld/scripttempl/i860coff.sc
+++ /dev/null
@@ -1,54 +0,0 @@
-# Copyright (C) 2014-2018 Free Software Foundation, Inc.
-#
-# Copying and distribution of this file, with or without modification,
-# are permitted in any medium without royalty provided the copyright
-# notice and this notice are preserved.
-
-cat <<EOF
-/* Copyright (C) 2014-2018 Free Software Foundation, Inc.
-
-   Copying and distribution of this script, with or without modification,
-   are permitted in any medium without royalty provided the copyright
-   notice and this notice are preserved.  */
-
-OUTPUT_FORMAT("${OUTPUT_FORMAT}")
-${LIB_SEARCH_DIRS}
-PROVIDE (__stack = 0);
-SECTIONS
-{
-  .text ${RELOCATING+ 0x1000000} : {
-    *(.text)
-    ${CONSTRUCTING+ . = ALIGN(4);}
-    ${RELOCATING+ etext  =  .;}
-    ${CONSTRUCTING+ __CTOR_LIST__ = .;}
-    ${CONSTRUCTING+ LONG((__CTOR_END__ - __CTOR_LIST__) / 4 - 2)}
-    ${CONSTRUCTING+ *(.ctors)}
-    ${CONSTRUCTING+ LONG(0)}
-    ${CONSTRUCTING+ __CTOR_END__ = .;}
-    ${CONSTRUCTING+ __DTOR_LIST__ = .;}
-    ${CONSTRUCTING+ LONG((__DTOR_END__ - __DTOR_LIST__) / 4 - 2)}
-    ${CONSTRUCTING+ *(.dtors)}
-    ${CONSTRUCTING+ LONG(0)}
-    ${CONSTRUCTING+ __DTOR_END__ = .;}
-  }
-  .data : {
-    *(.data)
-    ${RELOCATING+ edata  =  .};
-  }
-  .bss : {
-    ${RELOCATING+ __bss_start = .};
-    *(.bss)
-    *(COMMON)
-     ${RELOCATING+ end = ALIGN(0x8)};
-     ${RELOCATING+ _end = ALIGN(0x8)};
-  }
-  .stab  0 ${RELOCATING+(NOLOAD)} :
-  {
-    [ .stab ]
-  }
-  .stabstr  0 ${RELOCATING+(NOLOAD)} :
-  {
-    [ .stabstr ]
-  }
-}
-EOF
diff --git a/ld/scripttempl/i960.sc b/ld/scripttempl/i960.sc
deleted file mode 100644
index 647ae86..0000000
--- a/ld/scripttempl/i960.sc
+++ /dev/null
@@ -1,37 +0,0 @@
-# Copyright (C) 2014-2018 Free Software Foundation, Inc.
-#
-# Copying and distribution of this file, with or without modification,
-# are permitted in any medium without royalty provided the copyright
-# notice and this notice are preserved.
-
-cat <<EOF
-/* Copyright (C) 2014-2018 Free Software Foundation, Inc.
-
-   Copying and distribution of this script, with or without modification,
-   are permitted in any medium without royalty provided the copyright
-   notice and this notice are preserved.  */
-
-SECTIONS
-{
-    .text :
-    {
-	${GLD_STYLE+ CREATE_OBJECT_SYMBOLS}
-	*(.text)
-	${RELOCATING+ _etext = .};
-	${CONSTRUCTING+${COFF_CTORS}}
-    }
-    .data :
-    {
-	*(.data)
-	${CONSTRUCTING+CONSTRUCTORS}
-	${RELOCATING+ _edata = .};
-    }
-    .bss :
-    {
-	${RELOCATING+ _bss_start = .};
-	*(.bss)
-	*(COMMON)
-	${RELOCATING+ _end = .};
-    }
-}
-EOF
diff --git a/ld/testsuite/ld-discard/extern.d b/ld/testsuite/ld-discard/extern.d
index 9932ebc..50112e4 100644
--- a/ld/testsuite/ld-discard/extern.d
+++ b/ld/testsuite/ld-discard/extern.d
@@ -2,7 +2,7 @@
 #ld: -T discard.ld
 #error: .*data.* referenced in section `\.text' of tmpdir/extern.o: defined in discarded section `\.data\.exit' of tmpdir/extern.o
 #objdump: -p
-#xfail: d30v-*-* dlx-*-* i960-*-* pj*-*-*
+#xfail: d30v-*-* dlx-*-* pj*-*-*
 #xfail: m68hc12-*-* m6812-*-*
 #pass
 # The expected warning used to start with "`data' referenced..." but
diff --git a/ld/testsuite/ld-discard/start.d b/ld/testsuite/ld-discard/start.d
index d846bc7..e8ce59d 100644
--- a/ld/testsuite/ld-discard/start.d
+++ b/ld/testsuite/ld-discard/start.d
@@ -3,6 +3,6 @@
 #ld: -T discard.ld
 #error: `data' referenced in section `\.text' of tmpdir/start.o: defined in discarded section `\.data\.exit' of tmpdir/exit.o
 #objdump: -p
-#xfail: d30v-*-* dlx-*-* i960-*-* pj*-*-*
+#xfail: d30v-*-* dlx-*-* pj*-*-*
 #xfail: m68hc12-*-* m6812-*-*
 #pass
diff --git a/ld/testsuite/ld-discard/static.d b/ld/testsuite/ld-discard/static.d
index 3f61bb3..7a299cc 100644
--- a/ld/testsuite/ld-discard/static.d
+++ b/ld/testsuite/ld-discard/static.d
@@ -2,6 +2,6 @@
 #ld: -T discard.ld
 #error: `(\.data\.exit|data)' referenced in section `\.text' of tmpdir/static.o: defined in discarded section `\.data\.exit' of tmpdir/static.o
 #objdump: -p
-#xfail: d30v-*-* dlx-*-* i960-*-* pj*-*-*
+#xfail: d30v-*-* dlx-*-* pj*-*-*
 #xfail: m68hc12-*-* m6812-*-*
 #pass
diff --git a/ld/testsuite/ld-elf/compressed1d.d b/ld/testsuite/ld-elf/compressed1d.d
index 5c5592d..f3211de 100644
--- a/ld/testsuite/ld-elf/compressed1d.d
+++ b/ld/testsuite/ld-elf/compressed1d.d
@@ -2,7 +2,7 @@
 #as: --compress-debug-sections=none
 #ld: -r --compress-debug-sections=zlib-gnu
 #readelf: -SW
-#notarget: d30v-*-* dlx-*-* fr30-*-* frv-*-* ft32-*-* i370-*-* i860-*-* iq2000-*-* mn10200-*-* moxie-*-* msp430-*-* mt-*-* or1k-*-* pj-*-* riscv*-*-*
+#notarget: d30v-*-* dlx-*-* fr30-*-* frv-*-* ft32-*-* i370-*-* iq2000-*-* mn10200-*-* moxie-*-* msp430-*-* mt-*-* or1k-*-* pj-*-* riscv*-*-*
 # Not all ELF targets use the elf.em emulation...
 # RISC-V has linker relaxations that delete code, so text label subtractions
 # do not get resolved at assembly time, which results in a compressed section.
diff --git a/ld/testsuite/ld-elf/group1.d b/ld/testsuite/ld-elf/group1.d
index e355cd8..c2d67b9 100644
--- a/ld/testsuite/ld-elf/group1.d
+++ b/ld/testsuite/ld-elf/group1.d
@@ -2,7 +2,7 @@
 #source: group1b.s
 #ld: -T group.ld
 #readelf: -s
-#xfail: d30v-*-* dlx-*-* i960-*-* pj*-*-* *-*-solaris*
+#xfail: d30v-*-* dlx-*-* pj*-*-* *-*-solaris*
 # generic linker targets don't comply with all symbol merging rules
 
 Symbol table '.symtab' contains .* entries:
diff --git a/ld/testsuite/ld-elf/group3b.d b/ld/testsuite/ld-elf/group3b.d
index a242c40..bb8813f 100644
--- a/ld/testsuite/ld-elf/group3b.d
+++ b/ld/testsuite/ld-elf/group3b.d
@@ -2,7 +2,7 @@
 #source: group3a.s
 #ld: -T group.ld
 #readelf: -s
-#xfail: d30v-*-* dlx-*-* i960-*-* pj*-*-*
+#xfail: d30v-*-* dlx-*-* pj*-*-*
 # generic linker targets don't comply with all symbol merging rules
 
 Symbol table '.symtab' contains .* entries:
diff --git a/ld/testsuite/ld-elf/group8a.d b/ld/testsuite/ld-elf/group8a.d
index 52112e9..835ca56 100644
--- a/ld/testsuite/ld-elf/group8a.d
+++ b/ld/testsuite/ld-elf/group8a.d
@@ -1,8 +1,8 @@
 #source: group8.s
 #ld: -r --gc-sections --entry foo
 #readelf: -g --wide
-#notarget: d30v-*-* dlx-*-* i960-*-* pj*-*-* pru-*-*
-#notarget: hppa64-*-* i370-*-* i860-*-* ia64-*-* mep-*-* mn10200-*-*
+#notarget: d30v-*-* dlx-*-* pj*-*-* pru-*-*
+#notarget: hppa64-*-* i370-*-* ia64-*-* mep-*-* mn10200-*-*
 #xfail: cr16-*-* crx-*-*
 # generic linker targets don't support --gc-sections, nor do a bunch of others
 # cr16 and crx use non-standard scripts with memory regions, which don't play
diff --git a/ld/testsuite/ld-elf/group8b.d b/ld/testsuite/ld-elf/group8b.d
index 15714a7..6a17e87 100644
--- a/ld/testsuite/ld-elf/group8b.d
+++ b/ld/testsuite/ld-elf/group8b.d
@@ -1,8 +1,8 @@
 #source: group8.s
 #ld: -r --gc-sections --entry bar
 #readelf: -g --wide
-#xfail: d30v-*-* dlx-*-* i960-*-* pj*-*-* pru-*-*
-#xfail: hppa64-*-* i370-*-* i860-*-* mep-*-* mn10200-*-*
+#xfail: d30v-*-* dlx-*-* pj*-*-* pru-*-*
+#xfail: hppa64-*-* i370-*-* mep-*-* mn10200-*-*
 #xfail: cr16-*-* crx-*-*
 # generic linker targets don't support --gc-sections, nor do a bunch of others
 # cr16 and crx use non-standard scripts with memory regions, which don't play
diff --git a/ld/testsuite/ld-elf/group9a.d b/ld/testsuite/ld-elf/group9a.d
index 291164f..ac887d4 100644
--- a/ld/testsuite/ld-elf/group9a.d
+++ b/ld/testsuite/ld-elf/group9a.d
@@ -1,8 +1,8 @@
 #source: group9.s
 #ld: -r --gc-sections --entry foo
 #readelf: -g --wide
-#xfail: d30v-*-* dlx-*-* i960-*-* pj*-*-* pru-*-*
-#xfail: hppa64-*-* i370-*-* i860-*-* mep-*-* mn10200-*-*
+#xfail: d30v-*-* dlx-*-* pj*-*-* pru-*-*
+#xfail: hppa64-*-* i370-*-* mep-*-* mn10200-*-*
 #xfail: cr16-*-* crx-*-*
 # generic linker targets don't support --gc-sections, nor do a bunch of others
 # cr16 and crx use non-standard scripts with memory regions, which don't play
diff --git a/ld/testsuite/ld-elf/group9b.d b/ld/testsuite/ld-elf/group9b.d
index 54b0d7a..d6c980f 100644
--- a/ld/testsuite/ld-elf/group9b.d
+++ b/ld/testsuite/ld-elf/group9b.d
@@ -1,8 +1,8 @@
 #source: group9.s
 #ld: -r --gc-sections --entry bar
 #readelf: -g --wide
-#xfail: d30v-*-* dlx-*-* i960-*-* pj*-*-* pru-*-*
-#xfail: hppa64-*-* i370-*-* i860-*-* mep-*-* mn10200-*-*
+#xfail: d30v-*-* dlx-*-* pj*-*-* pru-*-*
+#xfail: hppa64-*-* i370-*-* mep-*-* mn10200-*-*
 #xfail: cr16-*-* crx-*-*
 # generic linker targets don't support --gc-sections, nor do a bunch of others
 # cr16 and crx use non-standard scripts with memory regions, which don't play
diff --git a/ld/testsuite/ld-elf/linkonce2.d b/ld/testsuite/ld-elf/linkonce2.d
index 7668b32..ea16ce1 100644
--- a/ld/testsuite/ld-elf/linkonce2.d
+++ b/ld/testsuite/ld-elf/linkonce2.d
@@ -2,7 +2,7 @@
 #source: linkonce1b.s
 #ld: -emit-relocs
 #objdump: -r
-#notarget: arc*-*-* d30v-*-* dlx-*-* i960-*-* pj*-*-*
+#notarget: arc*-*-* d30v-*-* dlx-*-* pj*-*-*
 # generic elf targets don't emit relocs
 
 .*:     file format .*
diff --git a/ld/testsuite/ld-elf/merge.d b/ld/testsuite/ld-elf/merge.d
index 5cd075f..b457445 100644
--- a/ld/testsuite/ld-elf/merge.d
+++ b/ld/testsuite/ld-elf/merge.d
@@ -3,7 +3,7 @@
 #objdump: -s
 #xfail: "bfin-*-*" "cr16-*-*" "cris*-*-*" "crx-*-*" "d10v-*-*" "d30v-*-*"
 #xfail: "dlx-*-*" "fr30-*-*" "frv-*-*" "hppa*64*-*-*" "h8300-*-*" "score-*-*"
-#xfail: "i370-*-*" "i860-*-*" "i960-*-*" "ip2k-*-*" "iq2000-*-*" "lm32-*-*"
+#xfail: "i370-*-*" "ip2k-*-*" "iq2000-*-*" "lm32-*-*"
 #xfail: "mcore-*-*" "mn102*-*-*" "ms1-*-*" "mep-*-*" "m68hc11-*-*" "nios2-*-*"
 #xfail: "or32-*-*" "pj-*-*" "tic6x-*-*" "vax-*-*" "xstormy16-*-*"
 #xfail: "xtensa*-*-*" "metag-*-*" "ft32-*-*" "pru-*-*"
diff --git a/ld/testsuite/ld-elf/merge2.d b/ld/testsuite/ld-elf/merge2.d
index e5f887d..8ac1648 100644
--- a/ld/testsuite/ld-elf/merge2.d
+++ b/ld/testsuite/ld-elf/merge2.d
@@ -2,7 +2,7 @@
 #ld: -T merge.ld
 #objdump: -s
 #xfail: "d30v-*-*" "dlx-*-*" "hppa64-*-*"
-#xfail: "i960-*-*" "ip2k-*-*" "pj-*-*"
+#xfail: "ip2k-*-*" "pj-*-*"
 
 .*:     file format .*elf.*
 
diff --git a/ld/testsuite/ld-elf/merge3.d b/ld/testsuite/ld-elf/merge3.d
index a14ee25..b9ae79c 100644
--- a/ld/testsuite/ld-elf/merge3.d
+++ b/ld/testsuite/ld-elf/merge3.d
@@ -2,7 +2,7 @@
 #ld: -T merge.ld
 #objdump: -s
 #xfail: "d30v-*-*" "dlx-*-*" "hppa64-*-*"
-#xfail: "i960-*-*" "ip2k-*-*" "pj-*-*"
+#xfail: "ip2k-*-*" "pj-*-*"
 
 .*:     file format .*elf.*
 
diff --git a/ld/testsuite/ld-elf/orphan-10.d b/ld/testsuite/ld-elf/orphan-10.d
index 1dbec42..a5cf6d9 100644
--- a/ld/testsuite/ld-elf/orphan-10.d
+++ b/ld/testsuite/ld-elf/orphan-10.d
@@ -1,7 +1,7 @@
 #source: orphan-10.s
 #ld: -N -T orphan-9.ld
 #objdump: -h
-#notarget: d30v-* dlx-* fr30-* frv-* ft32-* i860-* i960-* iq2000-* mn10200-* moxie-* ms1-* msp430-* mt-* pj-*
+#notarget: d30v-* dlx-* fr30-* frv-* ft32-* iq2000-* mn10200-* moxie-* ms1-* msp430-* mt-* pj-*
 
 #...
   . \.text         0+(08|10)  [0-9a-f]+  0+200 .*
diff --git a/ld/testsuite/ld-elf/orphan-11.d b/ld/testsuite/ld-elf/orphan-11.d
index 3daefba..15eb5fb 100644
--- a/ld/testsuite/ld-elf/orphan-11.d
+++ b/ld/testsuite/ld-elf/orphan-11.d
@@ -1,7 +1,7 @@
 #source: orphan-11.s
 #ld: -T orphan-11.ld --orphan-handling=error
 #objdump: -wh
-#notarget: d30v-* dlx-* fr30-* frv-* ft32-* i860-* i960-* iq2000-* mn10200-* moxie-* ms1-* msp430-* mt-* pj-*
+#notarget: d30v-* dlx-* fr30-* frv-* ft32-* iq2000-* mn10200-* moxie-* ms1-* msp430-* mt-* pj-*
 
 #...
   . \.text .*
diff --git a/ld/testsuite/ld-elf/orphan-12.d b/ld/testsuite/ld-elf/orphan-12.d
index 71a8c93..ff75345 100644
--- a/ld/testsuite/ld-elf/orphan-12.d
+++ b/ld/testsuite/ld-elf/orphan-12.d
@@ -1,7 +1,7 @@
 #source: orphan-12.s
 #ld: -T orphan-11.ld --strip-debug --orphan-handling=error
 #objdump: -wh
-#notarget: d30v-* dlx-* fr30-* frv-* ft32-* i860-* i960-* iq2000-* mn10200-* moxie-* ms1-* msp430-* mt-* pj-*
+#notarget: d30v-* dlx-* fr30-* frv-* ft32-* iq2000-* mn10200-* moxie-* ms1-* msp430-* mt-* pj-*
 
 #...
   . \.text .*
diff --git a/ld/testsuite/ld-elf/orphan-9.d b/ld/testsuite/ld-elf/orphan-9.d
index 790cff1..637e8c5 100644
--- a/ld/testsuite/ld-elf/orphan-9.d
+++ b/ld/testsuite/ld-elf/orphan-9.d
@@ -1,7 +1,7 @@
 #source: orphan-9.s
 #ld: -N -T orphan-9.ld
 #objdump: -h
-#notarget: d30v-* dlx-* fr30-* frv-* ft32-* i860-* i960-* iq2000-* mn10200-* moxie-* ms1-* msp430-* mt-* pj-*
+#notarget: d30v-* dlx-* fr30-* frv-* ft32-* iq2000-* mn10200-* moxie-* ms1-* msp430-* mt-* pj-*
 
 #...
   . \.text         0+(08|10)  [0-9a-f]+  0+200 .*
diff --git a/ld/testsuite/ld-elf/orphan-region.d b/ld/testsuite/ld-elf/orphan-region.d
index a74caf7..7af263a 100644
--- a/ld/testsuite/ld-elf/orphan-region.d
+++ b/ld/testsuite/ld-elf/orphan-region.d
@@ -1,7 +1,7 @@
 #source: orphan-region.s
 #ld: -T orphan-region.ld -N -z stack-size=0
 #readelf: -S -l --wide
-#xfail: d30v-*-* dlx-*-* fr30-*-* frv-*-elf ft32-*-* i860-*-* i960-*-*
+#xfail: d30v-*-* dlx-*-* fr30-*-* frv-*-elf ft32-*-*
 #xfail: iq*-*-* mn10200-*-* moxie-*-* msp*-*-* mt-*-* pj*-*-*
 #xfail: spu-*-* hppa*64*-*-* *-*-nacl*
 # if not using elf32.em, you don't get fancy orphan handling
diff --git a/ld/testsuite/ld-elf/orphan.d b/ld/testsuite/ld-elf/orphan.d
index d03281e..2d10e27 100644
--- a/ld/testsuite/ld-elf/orphan.d
+++ b/ld/testsuite/ld-elf/orphan.d
@@ -1,7 +1,7 @@
 #source: orphan.s
 #ld: -T orphan.ld
 #readelf: -S --wide
-#xfail: d30v-*-* dlx-*-* fr30-*-* frv-*-elf ft32-*-* i860-*-* i960-*-*
+#xfail: d30v-*-* dlx-*-* fr30-*-* frv-*-elf ft32-*-*
 #xfail: iq*-*-* mn10200-*-* moxie-*-* msp*-*-* mt-*-* pj*-*-*
 # if not using elf32.em, you don't get fancy orphan handling
 
diff --git a/ld/testsuite/ld-elf/orphan3.d b/ld/testsuite/ld-elf/orphan3.d
index 3331e3f..2c96f64 100644
--- a/ld/testsuite/ld-elf/orphan3.d
+++ b/ld/testsuite/ld-elf/orphan3.d
@@ -7,7 +7,7 @@
 #ld:
 #readelf: -S --wide
 #xfail: "d30v-*-*" "dlx-*-*" "fr30-*-*" "frv-*-elf" "ft32-*-*"
-#xfail: "i860-*-*" "i960-*-*" "iq2000-*-*" "mn10200-*-*" "msp430-*-*" "mt-*-*"
+#xfail: "iq2000-*-*" "mn10200-*-*" "msp430-*-*" "mt-*-*"
 #xfail: "pj-*-*"
 #xfail: "xstormy16-*-*"
 
diff --git a/ld/testsuite/ld-elf/pr12851.d b/ld/testsuite/ld-elf/pr12851.d
index 7126e68..67e4b4d 100644
--- a/ld/testsuite/ld-elf/pr12851.d
+++ b/ld/testsuite/ld-elf/pr12851.d
@@ -2,8 +2,8 @@
 #source: start.s
 #ld: --gc-sections
 #readelf: -s --wide
-#xfail: d30v-*-* dlx-*-* i960-*-* pj*-*-* pru-*-*
-#xfail: hppa64-*-* i370-*-* i860-*-* mep-*-* mn10200-*-*
+#xfail: d30v-*-* dlx-*-* pj*-*-* pru-*-*
+#xfail: hppa64-*-* i370-*-* mep-*-* mn10200-*-*
 # generic linker targets don't support --gc-sections, nor do a bunch of others
 
 #...
diff --git a/ld/testsuite/ld-elf/pr12975.d b/ld/testsuite/ld-elf/pr12975.d
index 9cdc767..f1eba66 100644
--- a/ld/testsuite/ld-elf/pr12975.d
+++ b/ld/testsuite/ld-elf/pr12975.d
@@ -1,8 +1,8 @@
 #ld: --gc-sections -shared -version-script pr12975.t
 #readelf: -s --wide
 #target: *-*-linux* *-*-gnu*
-#xfail: d30v-*-* dlx-*-* i960-*-* pj*-*-*
-#xfail: hppa64-*-* i370-*-* i860-*-* mep-*-* mn10200-*-*
+#xfail: d30v-*-* dlx-*-* pj*-*-*
+#xfail: hppa64-*-* i370-*-* mep-*-* mn10200-*-*
 # generic linker targets don't support --gc-sections, nor do a bunch of others
 
 #failif
diff --git a/ld/testsuite/ld-elf/pr13177.d b/ld/testsuite/ld-elf/pr13177.d
index 29bd374..f0d7c53 100644
--- a/ld/testsuite/ld-elf/pr13177.d
+++ b/ld/testsuite/ld-elf/pr13177.d
@@ -2,8 +2,8 @@
 #ld: --gc-sections -shared
 #readelf: -s -D --wide
 #target: *-*-linux* *-*-gnu*
-#xfail: d30v-*-* dlx-*-* i960-*-* pj*-*-*
-#xfail: hppa64-*-* i370-*-* i860-*-* mep-*-* mn10200-*-*
+#xfail: d30v-*-* dlx-*-* pj*-*-*
+#xfail: hppa64-*-* i370-*-* mep-*-* mn10200-*-*
 # generic linker targets don't support --gc-sections, nor do a bunch of others
 
 #failif
diff --git a/ld/testsuite/ld-elf/pr13195.d b/ld/testsuite/ld-elf/pr13195.d
index 53e41a9..0906825 100644
--- a/ld/testsuite/ld-elf/pr13195.d
+++ b/ld/testsuite/ld-elf/pr13195.d
@@ -1,8 +1,8 @@
 #ld: --gc-sections -shared -version-script pr13195.t
 #readelf: -s --wide -D
 #target: *-*-linux* *-*-gnu*
-#xfail: d30v-*-* dlx-*-* i960-*-* pj*-*-*
-#xfail: hppa64-*-* i370-*-* i860-*-* mep-*-* mn10200-*-*
+#xfail: d30v-*-* dlx-*-* pj*-*-*
+#xfail: hppa64-*-* i370-*-* mep-*-* mn10200-*-*
 # generic linker targets don't support --gc-sections, nor do a bunch of others
 
 #...
diff --git a/ld/testsuite/ld-elf/pr17550a.d b/ld/testsuite/ld-elf/pr17550a.d
index c8f0424..47caa8a 100644
--- a/ld/testsuite/ld-elf/pr17550a.d
+++ b/ld/testsuite/ld-elf/pr17550a.d
@@ -2,7 +2,7 @@
 #source: pr17550-2.s
 #ld: -r
 #readelf: -s --wide
-#notarget: alpha-*-* cr16-*-* crx-*-* d30v-*-* dlx-*-* i960-*-* pj*-*-*
+#notarget: alpha-*-* cr16-*-* crx-*-* d30v-*-* dlx-*-* pj*-*-*
 # Disabled on alpha because alpha has a different .set directive.
 # cr16 and crx use non-standard scripts with memory regions, which don't
 # play well with comdat group sections under ld -r.  Generic linker
diff --git a/ld/testsuite/ld-elf/pr17550b.d b/ld/testsuite/ld-elf/pr17550b.d
index d189747..9fa4881 100644
--- a/ld/testsuite/ld-elf/pr17550b.d
+++ b/ld/testsuite/ld-elf/pr17550b.d
@@ -2,7 +2,7 @@
 #source: pr17550-1.s
 #ld: -r
 #readelf: -s --wide
-#notarget: alpha-*-* cr16-*-* crx-*-* d30v-*-* dlx-*-* i960-*-* pj*-*-*
+#notarget: alpha-*-* cr16-*-* crx-*-* d30v-*-* dlx-*-* pj*-*-*
 # Disabled on alpha because alpha has a different .set directive.
 # cr16 and crx use non-standard scripts with memory regions, which don't
 # play well with comdat group sections under ld -r.  Generic linker
diff --git a/ld/testsuite/ld-elf/pr17550c.d b/ld/testsuite/ld-elf/pr17550c.d
index 23a83f1..bf18e208 100644
--- a/ld/testsuite/ld-elf/pr17550c.d
+++ b/ld/testsuite/ld-elf/pr17550c.d
@@ -2,7 +2,7 @@
 #source: pr17550-3.s
 #ld: -r
 #error: .*: defined in discarded section `\.data\[foo_group\]'
-#notarget: alpha-*-* cr16-*-* crx-*-* d30v-*-* dlx-*-* i960-*-* pj*-*-*
+#notarget: alpha-*-* cr16-*-* crx-*-* d30v-*-* dlx-*-* pj*-*-*
 # Disabled on alpha because alpha has a different .set directive.
 # cr16 and crx use non-standard scripts with memory regions, which don't
 # play well with comdat group sections under ld -r.  Generic linker
diff --git a/ld/testsuite/ld-elf/pr17550d.d b/ld/testsuite/ld-elf/pr17550d.d
index e8fad96..70c112f 100644
--- a/ld/testsuite/ld-elf/pr17550d.d
+++ b/ld/testsuite/ld-elf/pr17550d.d
@@ -2,7 +2,7 @@
 #source: pr17550-4.s
 #ld: -r
 #readelf: -s --wide
-#notarget: alpha-*-* cr16-*-* crx-*-* d30v-*-* dlx-*-* i960-*-* pj*-*-*
+#notarget: alpha-*-* cr16-*-* crx-*-* d30v-*-* dlx-*-* pj*-*-*
 # Disabled on alpha because alpha has a different .set directive.
 # cr16 and crx use non-standard scripts with memory regions, which don't
 # play well with comdat group sections under ld -r.  Generic linker
diff --git a/ld/testsuite/ld-elf/pr17615.d b/ld/testsuite/ld-elf/pr17615.d
index dbacbf0..fb7779c 100644
--- a/ld/testsuite/ld-elf/pr17615.d
+++ b/ld/testsuite/ld-elf/pr17615.d
@@ -1,8 +1,8 @@
 #ld: --gc-sections -shared
 #readelf: -S --wide --dyn-syms
 #target: *-*-linux* *-*-gnu*
-#xfail: d30v-*-* dlx-*-* i960-*-* pj*-*-*
-#xfail: hppa64-*-* i370-*-* i860-*-* mep-*-* mn10200-*-*
+#xfail: d30v-*-* dlx-*-* pj*-*-*
+#xfail: hppa64-*-* i370-*-* mep-*-* mn10200-*-*
 # generic linker targets don't support --gc-sections, nor do a bunch of others
 
 #...
diff --git a/ld/testsuite/ld-elf/pr20528a.d b/ld/testsuite/ld-elf/pr20528a.d
index 8ffb816..8b56e11 100644
--- a/ld/testsuite/ld-elf/pr20528a.d
+++ b/ld/testsuite/ld-elf/pr20528a.d
@@ -2,7 +2,7 @@
 #source: pr20528b.s
 #ld: -r
 #readelf: -S --wide
-#xfail: d30v-*-* dlx-*-* fr30-*-* frv-*-elf ft32-*-* i860-*-* i960-*-*
+#xfail: d30v-*-* dlx-*-* fr30-*-* frv-*-elf ft32-*-*
 #xfail: iq*-*-* mn10200-*-* moxie-*-* msp*-*-* mt-*-* pj*-*-*
 
 #...
diff --git a/ld/testsuite/ld-elf/pr20528b.d b/ld/testsuite/ld-elf/pr20528b.d
index 80f0aa5..34fd9fb 100644
--- a/ld/testsuite/ld-elf/pr20528b.d
+++ b/ld/testsuite/ld-elf/pr20528b.d
@@ -2,7 +2,7 @@
 #source: pr20528a.s
 #ld: -r
 #readelf: -S --wide
-#xfail: d30v-*-* dlx-*-* fr30-*-* frv-*-elf ft32-*-* i860-*-* i960-*-*
+#xfail: d30v-*-* dlx-*-* fr30-*-* frv-*-elf ft32-*-*
 #xfail: iq*-*-* mn10200-*-* moxie-*-* msp*-*-* mt-*-* pj*-*-*
 
 #...
diff --git a/ld/testsuite/ld-elf/pr21562a.d b/ld/testsuite/ld-elf/pr21562a.d
index 9fe6daa..d742756 100644
--- a/ld/testsuite/ld-elf/pr21562a.d
+++ b/ld/testsuite/ld-elf/pr21562a.d
@@ -1,8 +1,8 @@
 #ld: -shared -z defs --gc-sections
 #readelf: -s -S --wide
 #target: *-*-linux* *-*-gnu*
-#xfail: d30v-*-* dlx-*-* i960-*-* pj*-*-*
-#xfail: hppa64-*-* i370-*-* i860-*-* mep-*-* mn10200-*-*
+#xfail: d30v-*-* dlx-*-* pj*-*-*
+#xfail: hppa64-*-* i370-*-* mep-*-* mn10200-*-*
 # generic linker targets don't support --gc-sections, nor do a bunch of others
 
 #...
diff --git a/ld/testsuite/ld-elf/pr21562b.d b/ld/testsuite/ld-elf/pr21562b.d
index 72d4644..5312fc7 100644
--- a/ld/testsuite/ld-elf/pr21562b.d
+++ b/ld/testsuite/ld-elf/pr21562b.d
@@ -1,8 +1,8 @@
 #ld: -shared -z defs --gc-sections
 #readelf: -s -S --wide
 #target: *-*-linux* *-*-gnu*
-#xfail: d30v-*-* dlx-*-* i960-*-* pj*-*-*
-#xfail: hppa64-*-* i370-*-* i860-*-* mep-*-* mn10200-*-*
+#xfail: d30v-*-* dlx-*-* pj*-*-*
+#xfail: hppa64-*-* i370-*-* mep-*-* mn10200-*-*
 # generic linker targets don't support --gc-sections, nor do a bunch of others
 
 #...
diff --git a/ld/testsuite/ld-elf/pr21562c.d b/ld/testsuite/ld-elf/pr21562c.d
index 2ef8378..eb2063a 100644
--- a/ld/testsuite/ld-elf/pr21562c.d
+++ b/ld/testsuite/ld-elf/pr21562c.d
@@ -2,8 +2,8 @@
 #ld: -shared -z defs --gc-sections -T pr21562a.t
 #readelf: -s -S --wide
 #target: *-*-linux* *-*-gnu*
-#xfail: d30v-*-* dlx-*-* i960-*-* pj*-*-*
-#xfail: hppa64-*-* i370-*-* i860-*-* mep-*-* mn10200-*-*
+#xfail: d30v-*-* dlx-*-* pj*-*-*
+#xfail: hppa64-*-* i370-*-* mep-*-* mn10200-*-*
 # generic linker targets don't support --gc-sections, nor do a bunch of others
 
 #...
diff --git a/ld/testsuite/ld-elf/pr21562d.d b/ld/testsuite/ld-elf/pr21562d.d
index 47a8fce..ab59d8f 100644
--- a/ld/testsuite/ld-elf/pr21562d.d
+++ b/ld/testsuite/ld-elf/pr21562d.d
@@ -2,8 +2,8 @@
 #ld: -shared -z defs --gc-sections -T pr21562a.t
 #readelf: -s -S --wide
 #target: *-*-linux* *-*-gnu*
-#xfail: d30v-*-* dlx-*-* i960-*-* pj*-*-*
-#xfail: hppa64-*-* i370-*-* i860-*-* mep-*-* mn10200-*-*
+#xfail: d30v-*-* dlx-*-* pj*-*-*
+#xfail: hppa64-*-* i370-*-* mep-*-* mn10200-*-*
 # generic linker targets don't support --gc-sections, nor do a bunch of others
 
 #...
diff --git a/ld/testsuite/ld-elf/pr21562i.d b/ld/testsuite/ld-elf/pr21562i.d
index 3ce3bf1..16974b2 100644
--- a/ld/testsuite/ld-elf/pr21562i.d
+++ b/ld/testsuite/ld-elf/pr21562i.d
@@ -2,8 +2,8 @@
 #ld: -shared -z defs --gc-sections -T pr21562b.t
 #readelf: -s -S --wide
 #target: *-*-linux* *-*-gnu*
-#xfail: d30v-*-* dlx-*-* i960-*-* pj*-*-*
-#xfail: hppa64-*-* i370-*-* i860-*-* mep-*-* mn10200-*-*
+#xfail: d30v-*-* dlx-*-* pj*-*-*
+#xfail: hppa64-*-* i370-*-* mep-*-* mn10200-*-*
 # generic linker targets don't support --gc-sections, nor do a bunch of others
 
 #...
diff --git a/ld/testsuite/ld-elf/pr21562j.d b/ld/testsuite/ld-elf/pr21562j.d
index 415c845..88f655a 100644
--- a/ld/testsuite/ld-elf/pr21562j.d
+++ b/ld/testsuite/ld-elf/pr21562j.d
@@ -2,8 +2,8 @@
 #ld: -shared -z defs --gc-sections -T pr21562b.t
 #readelf: -s -S --wide
 #target: *-*-linux* *-*-gnu*
-#xfail: d30v-*-* dlx-*-* i960-*-* pj*-*-*
-#xfail: hppa64-*-* i370-*-* i860-*-* mep-*-* mn10200-*-*
+#xfail: d30v-*-* dlx-*-* pj*-*-*
+#xfail: hppa64-*-* i370-*-* mep-*-* mn10200-*-*
 # generic linker targets don't support --gc-sections, nor do a bunch of others
 
 #...
diff --git a/ld/testsuite/ld-elf/pr21562k.d b/ld/testsuite/ld-elf/pr21562k.d
index 68e6e3c..e2316ea 100644
--- a/ld/testsuite/ld-elf/pr21562k.d
+++ b/ld/testsuite/ld-elf/pr21562k.d
@@ -2,8 +2,8 @@
 #ld: -shared -z defs --gc-sections -T pr21562c.t
 #readelf: -s -S --wide
 #target: *-*-linux* *-*-gnu*
-#xfail: d30v-*-* dlx-*-* i960-*-* pj*-*-*
-#xfail: hppa64-*-* i370-*-* i860-*-* mep-*-* mn10200-*-*
+#xfail: d30v-*-* dlx-*-* pj*-*-*
+#xfail: hppa64-*-* i370-*-* mep-*-* mn10200-*-*
 # generic linker targets don't support --gc-sections, nor do a bunch of others
 
 #...
diff --git a/ld/testsuite/ld-elf/pr21562l.d b/ld/testsuite/ld-elf/pr21562l.d
index 4c408a2..82791e6 100644
--- a/ld/testsuite/ld-elf/pr21562l.d
+++ b/ld/testsuite/ld-elf/pr21562l.d
@@ -2,8 +2,8 @@
 #ld: -shared -z defs --gc-sections -T pr21562c.t
 #readelf: -s -S --wide
 #target: *-*-linux* *-*-gnu*
-#xfail: d30v-*-* dlx-*-* i960-*-* pj*-*-*
-#xfail: hppa64-*-* i370-*-* i860-*-* mep-*-* mn10200-*-*
+#xfail: d30v-*-* dlx-*-* pj*-*-*
+#xfail: hppa64-*-* i370-*-* mep-*-* mn10200-*-*
 # generic linker targets don't support --gc-sections, nor do a bunch of others
 
 #...
diff --git a/ld/testsuite/ld-elf/pr21562m.d b/ld/testsuite/ld-elf/pr21562m.d
index 4d1b390..b401d98 100644
--- a/ld/testsuite/ld-elf/pr21562m.d
+++ b/ld/testsuite/ld-elf/pr21562m.d
@@ -2,8 +2,8 @@
 #ld: -shared -z defs --gc-sections -T pr21562d.t
 #readelf: -s -S --wide
 #target: *-*-linux* *-*-gnu*
-#xfail: d30v-*-* dlx-*-* i960-*-* pj*-*-*
-#xfail: hppa64-*-* i370-*-* i860-*-* mep-*-* mn10200-*-*
+#xfail: d30v-*-* dlx-*-* pj*-*-*
+#xfail: hppa64-*-* i370-*-* mep-*-* mn10200-*-*
 # generic linker targets don't support --gc-sections, nor do a bunch of others
 
 #...
diff --git a/ld/testsuite/ld-elf/pr21562n.d b/ld/testsuite/ld-elf/pr21562n.d
index d31e1f3..74d9744 100644
--- a/ld/testsuite/ld-elf/pr21562n.d
+++ b/ld/testsuite/ld-elf/pr21562n.d
@@ -2,8 +2,8 @@
 #ld: -shared -z defs --gc-sections -T pr21562d.t
 #readelf: -s -S --wide
 #target: *-*-linux* *-*-gnu*
-#xfail: d30v-*-* dlx-*-* i960-*-* pj*-*-*
-#xfail: hppa64-*-* i370-*-* i860-*-* mep-*-* mn10200-*-*
+#xfail: d30v-*-* dlx-*-* pj*-*-*
+#xfail: hppa64-*-* i370-*-* mep-*-* mn10200-*-*
 # generic linker targets don't support --gc-sections, nor do a bunch of others
 
 #...
diff --git a/ld/testsuite/ld-elf/pr22677.d b/ld/testsuite/ld-elf/pr22677.d
index c477dee..4558ec7 100644
--- a/ld/testsuite/ld-elf/pr22677.d
+++ b/ld/testsuite/ld-elf/pr22677.d
@@ -1,7 +1,7 @@
 #ld: -r  --gc-sections -u foo
 #readelf: -S --wide
-#xfail: d30v-*-* dlx-*-* i960-*-* pj*-*-* pru-*-*
-#xfail: hppa64-*-* i370-*-* i860-*-* mep-*-* mn10200-*-*
+#xfail: d30v-*-* dlx-*-* pj*-*-* pru-*-*
+#xfail: hppa64-*-* i370-*-* mep-*-* mn10200-*-*
 #xfail: cr16-*-* crx-*-* msp430-*-*
 # msp430 puts the init_array and fini_array inside the .rodata section.
 # generic linker targets don't support --gc-sections, nor do a bunch of
diff --git a/ld/testsuite/ld-elf/pr22836-1a.d b/ld/testsuite/ld-elf/pr22836-1a.d
index 4acf45d..bd2d0f4 100644
--- a/ld/testsuite/ld-elf/pr22836-1a.d
+++ b/ld/testsuite/ld-elf/pr22836-1a.d
@@ -1,7 +1,7 @@
 #source: pr22836-1.s
 #ld: -r -s
 #readelf: -g --wide
-#xfail: d30v-*-* dlx-*-* i960-*-* pj-*-*
+#xfail: d30v-*-* dlx-*-* pj-*-*
 # Targets using the generic linker don't properly support comdat group sections
 
 There are no section groups in this file\.
diff --git a/ld/testsuite/ld-elf/pr22836-1b.d b/ld/testsuite/ld-elf/pr22836-1b.d
index 30d6fa3..2a332bc 100644
--- a/ld/testsuite/ld-elf/pr22836-1b.d
+++ b/ld/testsuite/ld-elf/pr22836-1b.d
@@ -1,7 +1,7 @@
 #source: pr22836-1.s
 #ld: -r -S
 #readelf: -g --wide
-#xfail: d30v-*-* dlx-*-* i960-*-* pj-*-*
+#xfail: d30v-*-* dlx-*-* pj-*-*
 # Targets using the generic linker don't properly support comdat group sections
 
 There are no section groups in this file\.
diff --git a/ld/testsuite/ld-elf/pr349.d b/ld/testsuite/ld-elf/pr349.d
index 565e387..b56683d 100644
--- a/ld/testsuite/ld-elf/pr349.d
+++ b/ld/testsuite/ld-elf/pr349.d
@@ -2,7 +2,7 @@
 #source: pr349-2.s
 #ld: -r
 #readelf: -S
-#xfail: d30v-*-* dlx-*-* fr30-*-* frv-*-elf ft32-*-* i860-*-* i960-*-*
+#xfail: d30v-*-* dlx-*-* fr30-*-* frv-*-elf ft32-*-*
 #xfail: iq*-*-* mn10200-*-* moxie-*-* msp*-*-* mt-*-* pj*-*-*
 # if not using elf32.em, you don't get fancy section handling
 
diff --git a/ld/testsuite/ld-elf/sec-to-seg.exp b/ld/testsuite/ld-elf/sec-to-seg.exp
index 1b887bb..becad1b 100644
--- a/ld/testsuite/ld-elf/sec-to-seg.exp
+++ b/ld/testsuite/ld-elf/sec-to-seg.exp
@@ -80,7 +80,6 @@ if {    [istarget avr-*-*]
      || [istarget dlx-*-*]
      || [istarget ft32-*-*]
      || [istarget h8300-*-*]
-     || [istarget i960-*-*]
      || [istarget ip2k-*-*]
      || [istarget m32r-*-*]
      || [istarget m88k-*-*]
diff --git a/ld/testsuite/ld-elf/sec64k.exp b/ld/testsuite/ld-elf/sec64k.exp
index b99473f..2495cb8 100644
--- a/ld/testsuite/ld-elf/sec64k.exp
+++ b/ld/testsuite/ld-elf/sec64k.exp
@@ -31,7 +31,6 @@ if ![is_elf_format] {
 # before local symbols, so don't bother testing them.
 if { [istarget "d30v-*-*"]
      || [istarget "dlx-*-*"]
-     || [istarget "i960-*-*"]
      || [istarget "pj*-*-*"] } {
     return
 }
diff --git a/ld/testsuite/ld-elf/warn1.d b/ld/testsuite/ld-elf/warn1.d
index 1ee4a5d..9c5ab86 100644
--- a/ld/testsuite/ld-elf/warn1.d
+++ b/ld/testsuite/ld-elf/warn1.d
@@ -5,7 +5,7 @@
 #warning: ^[^\n]*\): warning: witty one-liner$
 #readelf: -s
 #notarget: "sparc64-*-solaris2*" "sparcv9-*-solaris2*"
-#xfail: "d30v-*-*" "dlx-*-*" "i960-*-*" "pj-*-*"
+#xfail: "d30v-*-*" "dlx-*-*" "pj-*-*"
 
 # Check that warnings are generated for the .gnu.warning.SYMBOL
 # construct and that the symbol still appears as expected.
diff --git a/ld/testsuite/ld-elf/warn2.d b/ld/testsuite/ld-elf/warn2.d
index 4e723dd..cee842a 100644
--- a/ld/testsuite/ld-elf/warn2.d
+++ b/ld/testsuite/ld-elf/warn2.d
@@ -5,7 +5,7 @@
 #warning: ^[^\n]*\.[obj]+: warning: function 'Foo' used$
 #readelf: -s
 #notarget: "sparc64-*-solaris2*" "sparcv9-*-solaris2*"
-#xfail: d30v-*-* dlx-*-* fr30-*-* frv-*-elf ft32-*-* i860-*-* i960-*-*
+#xfail: d30v-*-* dlx-*-* fr30-*-* frv-*-elf ft32-*-*
 #xfail: iq*-*-* mn10200-*-* moxie-*-* msp*-*-* mt-*-* pj*-*-*
 # if not using elf32.em, you don't get fancy section handling
 
diff --git a/ld/testsuite/ld-elf/warn3.d b/ld/testsuite/ld-elf/warn3.d
index 358dca6..a0acd4b 100644
--- a/ld/testsuite/ld-elf/warn3.d
+++ b/ld/testsuite/ld-elf/warn3.d
@@ -2,7 +2,7 @@
 #ld: tmpdir/symbol3w.o tmpdir/symbol3.a 
 #warning: .*: warning: badsym warning$
 #readelf: -s
-#xfail: d30v-*-* dlx-*-* i960-*-* pj*-*-*
+#xfail: d30v-*-* dlx-*-* pj*-*-*
 # generic linker targets don't support .gnu.warning sections.
 
 # Check that warnings are generated for the symbols in .gnu.warning
diff --git a/ld/testsuite/lib/ld-lib.exp b/ld/testsuite/lib/ld-lib.exp
index 3d645ba..7b1862b 100644
--- a/ld/testsuite/lib/ld-lib.exp
+++ b/ld/testsuite/lib/ld-lib.exp
@@ -1775,13 +1775,11 @@ proc check_gc_sections_available { } {
 	# advertised by ld's options.
 	if {   [istarget d30v-*-*]
 	    || [istarget dlx-*-*]
-	    || [istarget i960-*-*]
 	    || [istarget pj*-*-*]
 	    || [istarget pru*-*-*]
 	    || [istarget alpha-*-*]
 	    || [istarget hppa*64-*-*]
 	    || [istarget i370-*-*]
-	    || [istarget i860-*-*]
 	    || [istarget ia64-*-*]
 	    || [istarget mep-*-*]
 	    || [istarget mn10200-*-*] } {
@@ -1834,8 +1832,6 @@ proc is_generic_elf { } {
 	 || [istarget "fr30-*-*"]
 	 || ([istarget "frv-*-*"] && ![istarget "frv-*-linux*"])
 	 || [istarget "ft32-*-*"]
-	 || [istarget "i860-*-*"]
-	 || [istarget "i960-*-*"]
 	 || [istarget "iq2000-*-*"]
 	 || [istarget "mn10200-*-*"]
 	 || [istarget "moxie-*-*"]
diff --git a/opcodes/ChangeLog b/opcodes/ChangeLog
index 3add69b..105ebb9 100644
--- a/opcodes/ChangeLog
+++ b/opcodes/ChangeLog
@@ -1,3 +1,15 @@
+2018-04-11  Alan Modra  <amodra@gmail.com>
+
+	* opcodes/i860-dis.c: Delete.
+	* opcodes/i960-dis.c: Delete.
+	* Makefile.am: Remove i860 and i960 support.
+	* configure.ac: Likewise.
+	* disassemble.c: Likewise.
+	* disassemble.h: Likewise.
+	* Makefile.in: Regenerate.
+	* configure: Regenerate.
+	* po/POTFILES.in: Regenerate.
+
 2018-04-04  H.J. Lu  <hongjiu.lu@intel.com>
 
 	PR binutils/23025
diff --git a/opcodes/Makefile.am b/opcodes/Makefile.am
index 1b269a8..f7c3813 100644
--- a/opcodes/Makefile.am
+++ b/opcodes/Makefile.am
@@ -144,8 +144,6 @@ TARGET_LIBOPCODES_CFILES = \
 	i370-opc.c \
 	i386-dis.c \
 	i386-opc.c \
-	i860-dis.c \
-	i960-dis.c \
 	ia64-dis.c \
 	ia64-opc.c \
 	ip2k-asm.c \
diff --git a/opcodes/Makefile.in b/opcodes/Makefile.in
index baa07b9..22f8029 100644
--- a/opcodes/Makefile.in
+++ b/opcodes/Makefile.in
@@ -446,8 +446,6 @@ TARGET_LIBOPCODES_CFILES = \
 	i370-opc.c \
 	i386-dis.c \
 	i386-opc.c \
-	i860-dis.c \
-	i960-dis.c \
 	ia64-dis.c \
 	ia64-opc.c \
 	ip2k-asm.c \
@@ -855,8 +853,6 @@ distclean-compile:
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/i370-opc.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/i386-dis.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/i386-opc.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/i860-dis.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/i960-dis.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ia64-dis.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ia64-opc.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ip2k-asm.Plo@am__quote@
diff --git a/opcodes/configure b/opcodes/configure
index 37b0eb0..b0f1840 100755
--- a/opcodes/configure
+++ b/opcodes/configure
@@ -12650,8 +12650,6 @@ if test x${all_targets} = xfalse ; then
 	bfd_i370_arch)		ta="$ta i370-dis.lo i370-opc.lo" ;;
 	bfd_i386_arch|bfd_iamcu_arch|bfd_l1om_arch|bfd_k1om_arch)
 				ta="$ta i386-dis.lo i386-opc.lo" ;;
-	bfd_i860_arch)		ta="$ta i860-dis.lo" ;;
-	bfd_i960_arch)		ta="$ta i960-dis.lo" ;;
 	bfd_ia64_arch)		ta="$ta ia64-dis.lo ia64-opc.lo" ;;
 	bfd_ip2k_arch)		ta="$ta ip2k-asm.lo ip2k-desc.lo ip2k-dis.lo ip2k-ibld.lo ip2k-opc.lo" using_cgen=yes ;;
 	bfd_epiphany_arch)	ta="$ta epiphany-asm.lo epiphany-desc.lo epiphany-dis.lo epiphany-ibld.lo epiphany-opc.lo" using_cgen=yes ;;
diff --git a/opcodes/configure.ac b/opcodes/configure.ac
index 481d72d..19fbd10 100644
--- a/opcodes/configure.ac
+++ b/opcodes/configure.ac
@@ -274,8 +274,6 @@ if test x${all_targets} = xfalse ; then
 	bfd_i370_arch)		ta="$ta i370-dis.lo i370-opc.lo" ;;
 	bfd_i386_arch|bfd_iamcu_arch|bfd_l1om_arch|bfd_k1om_arch)
 				ta="$ta i386-dis.lo i386-opc.lo" ;;
-	bfd_i860_arch)		ta="$ta i860-dis.lo" ;;
-	bfd_i960_arch)		ta="$ta i960-dis.lo" ;;
 	bfd_ia64_arch)		ta="$ta ia64-dis.lo ia64-opc.lo" ;;
 	bfd_ip2k_arch)		ta="$ta ip2k-asm.lo ip2k-desc.lo ip2k-dis.lo ip2k-ibld.lo ip2k-opc.lo" using_cgen=yes ;;
 	bfd_epiphany_arch)	ta="$ta epiphany-asm.lo epiphany-desc.lo epiphany-dis.lo epiphany-ibld.lo epiphany-opc.lo" using_cgen=yes ;;
diff --git a/opcodes/disassemble.c b/opcodes/disassemble.c
index 9fbf603..2991293 100644
--- a/opcodes/disassemble.c
+++ b/opcodes/disassemble.c
@@ -45,8 +45,6 @@
 #define ARCH_hppa
 #define ARCH_i370
 #define ARCH_i386
-#define ARCH_i860
-#define ARCH_i960
 #define ARCH_ia64
 #define ARCH_ip2k
 #define ARCH_iq2000
@@ -222,16 +220,6 @@ disassembler (enum bfd_architecture a,
       disassemble = print_insn_i386;
       break;
 #endif
-#ifdef ARCH_i860
-    case bfd_arch_i860:
-      disassemble = print_insn_i860;
-      break;
-#endif
-#ifdef ARCH_i960
-    case bfd_arch_i960:
-      disassemble = print_insn_i960;
-      break;
-#endif
 #ifdef ARCH_ia64
     case bfd_arch_ia64:
       disassemble = print_insn_ia64;
diff --git a/opcodes/disassemble.h b/opcodes/disassemble.h
index ee7a9c8..7d84cbc 100644
--- a/opcodes/disassemble.h
+++ b/opcodes/disassemble.h
@@ -48,8 +48,6 @@ extern int print_insn_i370		(bfd_vma, disassemble_info *);
 extern int print_insn_i386		(bfd_vma, disassemble_info *);
 extern int print_insn_i386_att		(bfd_vma, disassemble_info *);
 extern int print_insn_i386_intel	(bfd_vma, disassemble_info *);
-extern int print_insn_i860		(bfd_vma, disassemble_info *);
-extern int print_insn_i960		(bfd_vma, disassemble_info *);
 extern int print_insn_ia64		(bfd_vma, disassemble_info *);
 extern int print_insn_ip2k		(bfd_vma, disassemble_info *);
 extern int print_insn_iq2000		(bfd_vma, disassemble_info *);
diff --git a/opcodes/i860-dis.c b/opcodes/i860-dis.c
deleted file mode 100644
index 5211dcd..0000000
--- a/opcodes/i860-dis.c
+++ /dev/null
@@ -1,286 +0,0 @@
-/* Disassembler for the i860.
-   Copyright (C) 2000-2018 Free Software Foundation, Inc.
-
-   Contributed by Jason Eckhardt <jle@cygnus.com>.
-
-   This file is part of the GNU opcodes library.
-
-   This library is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 3, or (at your option)
-   any later version.
-
-   It is distributed in the hope that it will be useful, but WITHOUT
-   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-   or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
-   License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
-   MA 02110-1301, USA.  */
-
-#include "sysdep.h"
-#include "disassemble.h"
-#include "opcode/i860.h"
-
-/* Later we should probably choose the prefix based on which OS flavor.  */
-#define I860_REG_PREFIX "%"
-
-/* Integer register names (encoded as 0..31 in the instruction).  */
-static const char *const grnames[] =
- {"r0",  "r1",  "sp",  "fp",  "r4",  "r5",  "r6",  "r7",
-  "r8",  "r9",  "r10", "r11", "r12", "r13", "r14", "r15",
-  "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
-  "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31"};
-
-/* FP register names (encoded as 0..31 in the instruction).  */
-static const char *const frnames[] =
- {"f0",  "f1",  "f2",  "f3",  "f4",  "f5",  "f6",  "f7",
-  "f8",  "f9",  "f10", "f11", "f12", "f13", "f14", "f15",
-  "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",
-  "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31"};
-
-/* Control/status register names (encoded as 0..11 in the instruction).
-   Registers bear, ccr, p0, p1, p2 and p3 are XP only.  */
-static const char *const crnames[] =
- {"fir", "psr", "dirbase", "db", "fsr", "epsr", "bear", "ccr",
-  "p0", "p1", "p2", "p3", "--", "--", "--", "--" };
-
-
-
-/* True if opcode is xor, xorh, and, andh, or, orh, andnot, andnoth.  */
-#define BITWISE_OP(op)  ((op) == 0x30 || (op) == 0x31		\
-			 || (op) == 0x34 || (op) == 0x35	\
-			 || (op) == 0x38 || (op) == 0x39	\
-			 || (op) == 0x3c || (op) == 0x3d	\
-			 || (op) == 0x33 || (op) == 0x37	\
-			 || (op) == 0x3b || (op) == 0x3f)
-
-
-/* Sign extend N-bit number.  */
-static int
-sign_ext (unsigned int x, int n)
-{
-  int t;
-  t = x >> (n - 1);
-  t = ((-t) << n) | x;
-  return t;
-}
-
-
-/* Print a PC-relative branch offset.  VAL is the sign extended value
-   from the branch instruction.  */
-static void
-print_br_address (disassemble_info *info, bfd_vma memaddr, long val)
-{
-
-  long adj = (long)memaddr + 4 + (val << 2);
-
-  (*info->fprintf_func) (info->stream, "0x%08lx", adj);
-
-  /* Attempt to obtain a symbol for the target address.  */
-
-  if (info->print_address_func && adj != 0)
-    {
-      (*info->fprintf_func) (info->stream, "\t// ");
-      (*info->print_address_func) (adj, info);
-    }
-}
-
-
-/* Print one instruction.  */
-int
-print_insn_i860 (bfd_vma memaddr, disassemble_info *info)
-{
-  bfd_byte buff[4];
-  unsigned int insn, i;
-  int status;
-  const struct i860_opcode *opcode = 0;
-
-  status = (*info->read_memory_func) (memaddr, buff, sizeof (buff), info);
-  if (status != 0)
-    {
-      (*info->memory_error_func) (status, memaddr, info);
-      return -1;
-    }
-
-  /* Note that i860 instructions are always accessed as little endian
-     data, regardless of the endian mode of the i860.  */
-  insn = bfd_getl32 (buff);
-
-  status = 0;
-  i = 0;
-  while (i860_opcodes[i].name != NULL)
-    {
-      opcode = &i860_opcodes[i];
-      if ((insn & opcode->match) == opcode->match
-	  && (insn & opcode->lose) == 0)
-	{
-	  status = 1;
-	  break;
-	}
-      ++i;
-    }
-
-  if (status == 0)
-    {
-      /* Instruction not in opcode table.  */
-      (*info->fprintf_func) (info->stream, ".long %#08x", insn);
-    }
-  else
-    {
-      const char *s;
-      int val;
-
-      /* If this a flop (or a shrd) and its dual bit is set,
-         prefix with 'd.'.  */
-      if (((insn & 0xfc000000) == 0x48000000
-           || (insn & 0xfc000000) == 0xb0000000)
-          && (insn & 0x200))
-	(*info->fprintf_func) (info->stream, "d.%s\t", opcode->name);
-      else
-	(*info->fprintf_func) (info->stream, "%s\t", opcode->name);
-
-      for (s = opcode->args; *s; s++)
-	{
-	  switch (*s)
-	    {
-	    /* Integer register (src1).  */
-	    case '1':
-	      (*info->fprintf_func) (info->stream, "%s%s", I860_REG_PREFIX,
-				     grnames[(insn >> 11) & 0x1f]);
-	      break;
-
-	    /* Integer register (src2).  */
-	    case '2':
-	      (*info->fprintf_func) (info->stream, "%s%s", I860_REG_PREFIX,
-				     grnames[(insn >> 21) & 0x1f]);
-	      break;
-
-	    /* Integer destination register.  */
-	    case 'd':
-	      (*info->fprintf_func) (info->stream, "%s%s", I860_REG_PREFIX,
-				     grnames[(insn >> 16) & 0x1f]);
-	      break;
-
-	    /* Floating-point register (src1).  */
-	    case 'e':
-	      (*info->fprintf_func) (info->stream, "%s%s", I860_REG_PREFIX,
-				     frnames[(insn >> 11) & 0x1f]);
-	      break;
-
-	    /* Floating-point register (src2).  */
-	    case 'f':
-	      (*info->fprintf_func) (info->stream, "%s%s", I860_REG_PREFIX,
-				     frnames[(insn >> 21) & 0x1f]);
-	      break;
-
-	    /* Floating-point destination register.  */
-	    case 'g':
-	      (*info->fprintf_func) (info->stream, "%s%s", I860_REG_PREFIX,
-				     frnames[(insn >> 16) & 0x1f]);
-	      break;
-
-	    /* Control register.  */
-	    case 'c':
-	      (*info->fprintf_func) (info->stream, "%s%s", I860_REG_PREFIX,
-				     crnames[(insn >> 21) & 0xf]);
-	      break;
-
-	    /* 16-bit immediate (sign extend, except for bitwise ops).  */
-	    case 'i':
-	      if (BITWISE_OP ((insn & 0xfc000000) >> 26))
-		(*info->fprintf_func) (info->stream, "0x%04x",
-				       (unsigned int) (insn & 0xffff));
-	      else
-		(*info->fprintf_func) (info->stream, "%d",
-				       sign_ext ((insn & 0xffff), 16));
-	      break;
-
-	    /* 16-bit immediate, aligned (2^0, ld.b).  */
-	    case 'I':
-	      (*info->fprintf_func) (info->stream, "%d",
-				     sign_ext ((insn & 0xffff), 16));
-	      break;
-
-	    /* 16-bit immediate, aligned (2^1, ld.s).  */
-	    case 'J':
-	      (*info->fprintf_func) (info->stream, "%d",
-				     sign_ext ((insn & 0xfffe), 16));
-	      break;
-
-	    /* 16-bit immediate, aligned (2^2, ld.l, {p}fld.l, fst.l).  */
-	    case 'K':
-	      (*info->fprintf_func) (info->stream, "%d",
-				     sign_ext ((insn & 0xfffc), 16));
-	      break;
-
-	    /* 16-bit immediate, aligned (2^3, {p}fld.d, fst.d).  */
-	    case 'L':
-	      (*info->fprintf_func) (info->stream, "%d",
-				     sign_ext ((insn & 0xfff8), 16));
-	      break;
-
-	    /* 16-bit immediate, aligned (2^4, {p}fld.q, fst.q).  */
-	    case 'M':
-	      (*info->fprintf_func) (info->stream, "%d",
-				     sign_ext ((insn & 0xfff0), 16));
-	      break;
-
-	    /* 5-bit immediate (zero extend).  */
-	    case '5':
-	      (*info->fprintf_func) (info->stream, "%d",
-				     ((insn >> 11) & 0x1f));
-	      break;
-
-	    /* Split 16 bit immediate (20..16:10..0).  */
-	    case 's':
-	      val = ((insn >> 5) & 0xf800) | (insn & 0x07ff);
-	      (*info->fprintf_func) (info->stream, "%d",
-				     sign_ext (val, 16));
-	      break;
-
-	    /* Split 16 bit immediate, aligned. (2^0, st.b).  */
-	    case 'S':
-	      val = ((insn >> 5) & 0xf800) | (insn & 0x07ff);
-	      (*info->fprintf_func) (info->stream, "%d",
-				     sign_ext (val, 16));
-	      break;
-
-	    /* Split 16 bit immediate, aligned. (2^1, st.s).  */
-	    case 'T':
-	      val = ((insn >> 5) & 0xf800) | (insn & 0x07fe);
-	      (*info->fprintf_func) (info->stream, "%d",
-				     sign_ext (val, 16));
-	      break;
-
-	    /* Split 16 bit immediate, aligned. (2^2, st.l).  */
-	    case 'U':
-	      val = ((insn >> 5) & 0xf800) | (insn & 0x07fc);
-	      (*info->fprintf_func) (info->stream, "%d",
-				     sign_ext (val, 16));
-	      break;
-
-	    /* 26-bit PC relative immediate (lbroff).  */
-	    case 'l':
-	      val = sign_ext ((insn & 0x03ffffff), 26);
-	      print_br_address (info, memaddr, val);
-	      break;
-
-	    /* 16-bit PC relative immediate (sbroff).  */
-	    case 'r':
-	      val = sign_ext ((((insn >> 5) & 0xf800) | (insn & 0x07ff)), 16);
-	      print_br_address (info, memaddr, val);
-	      break;
-
-	    default:
-	      (*info->fprintf_func) (info->stream, "%c", *s);
-	      break;
-	    }
-	}
-    }
-
-  return sizeof (insn);
-}
-
diff --git a/opcodes/i960-dis.c b/opcodes/i960-dis.c
deleted file mode 100644
index 6cb3485..0000000
--- a/opcodes/i960-dis.c
+++ /dev/null
@@ -1,932 +0,0 @@
-/* Disassemble i80960 instructions.
-   Copyright (C) 1990-2018 Free Software Foundation, Inc.
-
-   This file is part of the GNU opcodes library.
-
-   This library is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 3, or (at your option)
-   any later version.
-
-   It is distributed in the hope that it will be useful, but WITHOUT
-   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-   or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
-   License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; see the file COPYING.  If not, write to the
-   Free Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
-   02110-1301, USA.  */
-
-#include "sysdep.h"
-#include "disassemble.h"
-
-static const char *const reg_names[] = {
-/*  0 */	"pfp", "sp",  "rip", "r3",  "r4",  "r5",  "r6",  "r7",
-/*  8 */	"r8",  "r9",  "r10", "r11", "r12", "r13", "r14", "r15",
-/* 16 */	"g0",  "g1",  "g2",  "g3",  "g4",  "g5",  "g6",  "g7",
-/* 24 */	"g8",  "g9",  "g10", "g11", "g12", "g13", "g14", "fp",
-/* 32 */	"pc",  "ac",  "ip",  "tc",  "fp0", "fp1", "fp2", "fp3"
-};
-
-
-static FILE *stream;		/* Output goes here */
-static struct disassemble_info *info;
-static void print_addr (bfd_vma);
-static void ctrl (bfd_vma, unsigned long, unsigned long);
-static void cobr (bfd_vma, unsigned long, unsigned long);
-static void reg (unsigned long);
-static int mem (bfd_vma, unsigned long, unsigned long, int);
-static void ea (bfd_vma, int, const char *, const char *, int, unsigned int);
-static void dstop (int, int, int);
-static void regop (int, int, int, int);
-static void invalid (int);
-static int pinsn (bfd_vma, unsigned long, unsigned long);
-static void put_abs (unsigned long, unsigned long);
-
-
-/* Print the i960 instruction at address 'memaddr' in debugged memory,
-   on INFO->STREAM.  Returns length of the instruction, in bytes.  */
-
-int
-print_insn_i960 (bfd_vma memaddr, struct disassemble_info *info_arg)
-{
-  unsigned int word1, word2 = 0xdeadbeef;
-  bfd_byte buffer[8];
-  int status;
-
-  info = info_arg;
-  stream = info->stream;
-
-  /* Read word1.  Only read word2 if the instruction
-     needs it, to prevent reading past the end of a section.  */
-
-  status = (*info->read_memory_func) (memaddr, (bfd_byte *) buffer, 4, info);
-  if (status != 0)
-    {
-      (*info->memory_error_func) (status, memaddr, info);
-      return -1;
-    }
-
-  word1 = bfd_getl32 (buffer);
-
-  /* Divide instruction set into classes based on high 4 bits of opcode.  */
-  switch ( (word1 >> 28) & 0xf )
-    {
-    default:
-      break;
-    case 0x8:
-    case 0x9:
-    case 0xa:
-    case 0xb:
-    case 0xc:
-      /* Read word2.  */
-      status = (*info->read_memory_func)
-	(memaddr + 4, (bfd_byte *) (buffer + 4), 4, info);
-      if (status != 0)
-	{
-	  (*info->memory_error_func) (status, memaddr, info);
-	  return -1;
-	}
-      word2 = bfd_getl32 (buffer + 4);
-      break;
-    }
-
-  return pinsn( memaddr, word1, word2 );
-}
-
-#define IN_GDB
-
-/*****************************************************************************
- *	All code below this point should be identical with that of
- *	the disassembler in gdmp960.
-
- A noble sentiment, but at least in cosmetic ways (info->fprintf_func), it
- just ain't so. -kingdon, 31 Mar 93
- *****************************************************************************/
-
-struct tabent {
-  char *name;
-  short numops;
-};
-
-struct sparse_tabent {
-  int opcode;
-  char *name;
-  short numops;
-};
-
-static int
-pinsn (bfd_vma memaddr, unsigned long word1, unsigned long word2)
-{
-  int instr_len;
-
-  instr_len = 4;
-  put_abs (word1, word2);
-
-  /* Divide instruction set into classes based on high 4 bits of opcode.  */
-  switch ((word1 >> 28) & 0xf)
-    {
-    case 0x0:
-    case 0x1:
-      ctrl (memaddr, word1, word2);
-      break;
-    case 0x2:
-    case 0x3:
-      cobr (memaddr, word1, word2);
-      break;
-    case 0x5:
-    case 0x6:
-    case 0x7:
-      reg (word1);
-      break;
-    case 0x8:
-    case 0x9:
-    case 0xa:
-    case 0xb:
-    case 0xc:
-      instr_len = mem (memaddr, word1, word2, 0);
-      break;
-    default:
-      /* Invalid instruction, print as data word.  */
-      invalid (word1);
-      break;
-    }
-  return instr_len;
-}
-
-/* CTRL format.. */
-
-static void
-ctrl (bfd_vma memaddr, unsigned long word1, unsigned long word2 ATTRIBUTE_UNUSED)
-{
-  int i;
-  static const struct tabent ctrl_tab[] = {
-    { NULL,		0, },	/* 0x00 */
-    { NULL,		0, },	/* 0x01 */
-    { NULL,		0, },	/* 0x02 */
-    { NULL,		0, },	/* 0x03 */
-    { NULL,		0, },	/* 0x04 */
-    { NULL,		0, },	/* 0x05 */
-    { NULL,		0, },	/* 0x06 */
-    { NULL,		0, },	/* 0x07 */
-    { "b",		1, },	/* 0x08 */
-    { "call",		1, },	/* 0x09 */
-    { "ret",		0, },	/* 0x0a */
-    { "bal",		1, },	/* 0x0b */
-    { NULL,		0, },	/* 0x0c */
-    { NULL,		0, },	/* 0x0d */
-    { NULL,		0, },	/* 0x0e */
-    { NULL,		0, },	/* 0x0f */
-    { "bno",		1, },	/* 0x10 */
-    { "bg",		1, },	/* 0x11 */
-    { "be",		1, },	/* 0x12 */
-    { "bge",		1, },	/* 0x13 */
-    { "bl",		1, },	/* 0x14 */
-    { "bne",		1, },	/* 0x15 */
-    { "ble",		1, },	/* 0x16 */
-    { "bo",		1, },	/* 0x17 */
-    { "faultno",	0, },	/* 0x18 */
-    { "faultg",		0, },	/* 0x19 */
-    { "faulte",		0, },	/* 0x1a */
-    { "faultge",	0, },	/* 0x1b */
-    { "faultl",		0, },	/* 0x1c */
-    { "faultne",	0, },	/* 0x1d */
-    { "faultle",	0, },	/* 0x1e */
-    { "faulto",		0, },	/* 0x1f */
-  };
-
-  i = (word1 >> 24) & 0xff;
-  if ((ctrl_tab[i].name == NULL) || ((word1 & 1) != 0))
-    {
-      invalid (word1);
-      return;
-    }
-
-  (*info->fprintf_func) (stream, "%s", ctrl_tab[i].name);
-  if (word1 & 2)
-    /* Predicts branch not taken.  */
-    (*info->fprintf_func) (stream, ".f");
-
-  if (ctrl_tab[i].numops == 1)
-    {
-      /* Extract displacement and convert to address.  */
-      word1 &= 0x00ffffff;
-
-      if (word1 & 0x00800000)
-	{
-	  /* Sign bit is set.  */
-	  word1 |= (-1 & ~0xffffff);	/* Sign extend.  */
-	}
-
-      (*info->fprintf_func) (stream, "\t");
-      print_addr (word1 + memaddr);
-    }
-}
-
-/* COBR format.  */
-
-static void
-cobr (bfd_vma memaddr, unsigned long word1, unsigned long word2 ATTRIBUTE_UNUSED)
-{
-  int src1;
-  int src2;
-  int i;
-
-  static const struct tabent cobr_tab[] = {
-    { "testno",	1, },	/* 0x20 */
-    { "testg",	1, },	/* 0x21 */
-    { "teste",	1, },	/* 0x22 */
-    { "testge",	1, },	/* 0x23 */
-    { "testl",	1, },	/* 0x24 */
-    { "testne",	1, },	/* 0x25 */
-    { "testle",	1, },	/* 0x26 */
-    { "testo",	1, },	/* 0x27 */
-    { NULL,	0, },	/* 0x28 */
-    { NULL,	0, },	/* 0x29 */
-    { NULL,	0, },	/* 0x2a */
-    { NULL,	0, },	/* 0x2b */
-    { NULL,	0, },	/* 0x2c */
-    { NULL,	0, },	/* 0x2d */
-    { NULL,	0, },	/* 0x2e */
-    { NULL,	0, },	/* 0x2f */
-    { "bbc",	3, },	/* 0x30 */
-    { "cmpobg",	3, },	/* 0x31 */
-    { "cmpobe",	3, },	/* 0x32 */
-    { "cmpobge",3, },	/* 0x33 */
-    { "cmpobl",	3, },	/* 0x34 */
-    { "cmpobne",3, },	/* 0x35 */
-    { "cmpoble",3, },	/* 0x36 */
-    { "bbs",	3, },	/* 0x37 */
-    { "cmpibno",3, },	/* 0x38 */
-    { "cmpibg",	3, },	/* 0x39 */
-    { "cmpibe",	3, },	/* 0x3a */
-    { "cmpibge",3, },	/* 0x3b */
-    { "cmpibl",	3, },	/* 0x3c */
-    { "cmpibne",3, },	/* 0x3d */
-    { "cmpible",3, },	/* 0x3e */
-    { "cmpibo",	3, },	/* 0x3f */
-  };
-
-  i = ((word1 >> 24) & 0xff) - 0x20;
-  if (cobr_tab[i].name == NULL)
-    {
-      invalid (word1);
-      return;
-    }
-
-  (*info->fprintf_func) (stream, "%s", cobr_tab[i].name);
-
-  /* Predicts branch not taken.  */
-  if (word1 & 2)
-    (*info->fprintf_func) (stream, ".f");
-
-  (*info->fprintf_func) (stream, "\t");
-
-  src1 = (word1 >> 19) & 0x1f;
-  src2 = (word1 >> 14) & 0x1f;
-
-  if (word1 & 0x02000)
-    /* M1 is 1 */
-    (*info->fprintf_func) (stream, "%d", src1);
-  else
-    (*info->fprintf_func) (stream, "%s", reg_names[src1]);
-
-  if (cobr_tab[i].numops > 1)
-    {
-      if (word1 & 1)
-	/* S2 is 1.  */
-	(*info->fprintf_func) (stream, ",sf%d,", src2);
-      else
-	/* S1 is 0.  */
-	(*info->fprintf_func) (stream, ",%s,", reg_names[src2]);
-
-      /* Extract displacement and convert to address.  */
-      word1 &= 0x00001ffc;
-      if (word1 & 0x00001000)
-	/* Negative displacement.  */
-	word1 |= (-1 & ~0x1fff);	/* Sign extend.  */
-
-      print_addr (memaddr + word1);
-    }
-}
-
-/* MEM format.  */
-/* Returns instruction length: 4 or 8.  */
-
-static int
-mem (bfd_vma memaddr, unsigned long word1, unsigned long word2, int noprint)
-{
-  int i, j;
-  int len;
-  int mode;
-  int offset;
-  const char *reg1, *reg2, *reg3;
-
-  /* This lookup table is too sparse to make it worth typing in, but not
-     so large as to make a sparse array necessary.  We create the table
-     at runtime.  */
-
-  /* NOTE: In this table, the meaning of 'numops' is:
-      1: single operand
-      2: 2 operands, load instruction
-     -2: 2 operands, store instruction.  */
-  static struct tabent *mem_tab;
-  /* Opcodes of 0x8X, 9X, aX, bX, and cX must be in the table.  */
-#define MEM_MIN	0x80
-#define MEM_MAX	0xcf
-#define MEM_SIZ	( * sizeof(struct tabent))
-
-  static const struct sparse_tabent mem_init[] = {
-    { 0x80,	"ldob",	 2 },
-    { 0x82,	"stob",	-2 },
-    { 0x84,	"bx",	 1 },
-    { 0x85,	"balx",	 2 },
-    { 0x86,	"callx", 1 },
-    { 0x88,	"ldos",	 2 },
-    { 0x8a,	"stos",	-2 },
-    { 0x8c,	"lda",	 2 },
-    { 0x90,	"ld",	 2 },
-    { 0x92,	"st",	-2 },
-    { 0x98,	"ldl",	 2 },
-    { 0x9a,	"stl",	-2 },
-    { 0xa0,	"ldt",	 2 },
-    { 0xa2,	"stt",	-2 },
-    { 0xac,	"dcinva", 1 },
-    { 0xb0,	"ldq",	 2 },
-    { 0xb2,	"stq",	-2 },
-    { 0xc0,	"ldib",	 2 },
-    { 0xc2,	"stib",	-2 },
-    { 0xc8,	"ldis",	 2 },
-    { 0xca,	"stis",	-2 },
-    { 0,	NULL,	0 }
-  };
-  static struct tabent mem_tab_buf[MEM_MAX - MEM_MIN + 1];
-
-  if (mem_tab == NULL)
-    {
-      mem_tab = mem_tab_buf;
-
-      for (i = 0; mem_init[i].opcode != 0; i++)
-	{
-	  j = mem_init[i].opcode - MEM_MIN;
-	  mem_tab[j].name = mem_init[i].name;
-	  mem_tab[j].numops = mem_init[i].numops;
-	}
-    }
-
-  i = ((word1 >> 24) & 0xff) - MEM_MIN;
-  mode = (word1 >> 10) & 0xf;
-
-  if ((mem_tab[i].name != NULL)		/* Valid instruction */
-      && ((mode == 5) || (mode >= 12)))
-    /* With 32-bit displacement.  */
-    len = 8;
-  else
-    len = 4;
-
-  if (noprint)
-    return len;
-
-  if ((mem_tab[i].name == NULL) || (mode == 6))
-    {
-      invalid (word1);
-      return len;
-    }
-
-  (*info->fprintf_func) (stream, "%s\t", mem_tab[i].name);
-
-  reg1 = reg_names[ (word1 >> 19) & 0x1f ];	/* MEMB only */
-  reg2 = reg_names[ (word1 >> 14) & 0x1f ];
-  reg3 = reg_names[ word1 & 0x1f ];		/* MEMB only */
-  offset = word1 & 0xfff;				/* MEMA only  */
-
-  switch (mem_tab[i].numops)
-    {
-    case 2: /* LOAD INSTRUCTION */
-      if (mode & 4)
-	{			/* MEMB FORMAT */
-	  ea (memaddr, mode, reg2, reg3, word1, word2);
-	  (*info->fprintf_func) (stream, ",%s", reg1);
-	}
-      else
-	{				/* MEMA FORMAT */
-	  (*info->fprintf_func) (stream, "0x%x", (unsigned) offset);
-
-	  if (mode & 8)
-	    (*info->fprintf_func) (stream, "(%s)", reg2);
-
-	  (*info->fprintf_func)(stream, ",%s", reg1);
-	}
-      break;
-
-    case -2: /* STORE INSTRUCTION */
-      if (mode & 4)
-	{
-	  /* MEMB FORMAT */
-	  (*info->fprintf_func) (stream, "%s,", reg1);
-	  ea (memaddr, mode, reg2, reg3, word1, word2);
-	}
-      else
-	{
-	  /* MEMA FORMAT */
-	  (*info->fprintf_func) (stream, "%s,0x%x", reg1, (unsigned) offset);
-
-	  if (mode & 8)
-	    (*info->fprintf_func) (stream, "(%s)", reg2);
-	}
-      break;
-
-    case 1: /* BX/CALLX INSTRUCTION */
-      if (mode & 4)
-	{
-	  /* MEMB FORMAT */
-	  ea (memaddr, mode, reg2, reg3, word1, word2);
-	}
-      else
-	{
-	  /* MEMA FORMAT */
-	  (*info->fprintf_func) (stream, "0x%x", (unsigned) offset);
-	  if (mode & 8)
-	    (*info->fprintf_func) (stream, "(%s)", reg2);
-	}
-      break;
-    }
-
-  return len;
-}
-
-/* REG format.  */
-
-static void
-reg (unsigned long word1)
-{
-  int i, j;
-  int opcode;
-  int fp;
-  int m1, m2, m3;
-  int s1, s2;
-  int src, src2, dst;
-  char *mnemp;
-
-  /* This lookup table is too sparse to make it worth typing in, but not
-     so large as to make a sparse array necessary.  We create the table
-     at runtime.  */
-
-  /* NOTE: In this table, the meaning of 'numops' is:
-	 1: single operand, which is NOT a destination.
-	-1: single operand, which IS a destination.
-	 2: 2 operands, the 2nd of which is NOT a destination.
-	-2: 2 operands, the 2nd of which IS a destination.
-	 3: 3 operands
-
-	If an opcode mnemonic begins with "F", it is a floating-point
-	opcode (the "F" is not printed).  */
-
-  static struct tabent *reg_tab;
-  static const struct sparse_tabent reg_init[] =
-  {
-#define REG_MIN	0x580
-    { 0x580,	"notbit",	3 },
-    { 0x581,	"and",		3 },
-    { 0x582,	"andnot",	3 },
-    { 0x583,	"setbit",	3 },
-    { 0x584,	"notand",	3 },
-    { 0x586,	"xor",		3 },
-    { 0x587,	"or",		3 },
-    { 0x588,	"nor",		3 },
-    { 0x589,	"xnor",		3 },
-    { 0x58a,	"not",		-2 },
-    { 0x58b,	"ornot",	3 },
-    { 0x58c,	"clrbit",	3 },
-    { 0x58d,	"notor",	3 },
-    { 0x58e,	"nand",		3 },
-    { 0x58f,	"alterbit",	3 },
-    { 0x590,	"addo",		3 },
-    { 0x591,	"addi",		3 },
-    { 0x592,	"subo",		3 },
-    { 0x593,	"subi",		3 },
-    { 0x594,	"cmpob",	2 },
-    { 0x595,	"cmpib",	2 },
-    { 0x596,	"cmpos",	2 },
-    { 0x597,	"cmpis",	2 },
-    { 0x598,	"shro",		3 },
-    { 0x59a,	"shrdi",	3 },
-    { 0x59b,	"shri",		3 },
-    { 0x59c,	"shlo",		3 },
-    { 0x59d,	"rotate",	3 },
-    { 0x59e,	"shli",		3 },
-    { 0x5a0,	"cmpo",		2 },
-    { 0x5a1,	"cmpi",		2 },
-    { 0x5a2,	"concmpo",	2 },
-    { 0x5a3,	"concmpi",	2 },
-    { 0x5a4,	"cmpinco",	3 },
-    { 0x5a5,	"cmpinci",	3 },
-    { 0x5a6,	"cmpdeco",	3 },
-    { 0x5a7,	"cmpdeci",	3 },
-    { 0x5ac,	"scanbyte",	2 },
-    { 0x5ad,	"bswap",	-2 },
-    { 0x5ae,	"chkbit",	2 },
-    { 0x5b0,	"addc",		3 },
-    { 0x5b2,	"subc",		3 },
-    { 0x5b4,	"intdis",	0 },
-    { 0x5b5,	"inten",	0 },
-    { 0x5cc,	"mov",		-2 },
-    { 0x5d8,	"eshro",	3 },
-    { 0x5dc,	"movl",		-2 },
-    { 0x5ec,	"movt",		-2 },
-    { 0x5fc,	"movq",		-2 },
-    { 0x600,	"synmov",	2 },
-    { 0x601,	"synmovl",	2 },
-    { 0x602,	"synmovq",	2 },
-    { 0x603,	"cmpstr",	3 },
-    { 0x604,	"movqstr",	3 },
-    { 0x605,	"movstr",	3 },
-    { 0x610,	"atmod",	3 },
-    { 0x612,	"atadd",	3 },
-    { 0x613,	"inspacc",	-2 },
-    { 0x614,	"ldphy",	-2 },
-    { 0x615,	"synld",	-2 },
-    { 0x617,	"fill",		3 },
-    { 0x630,	"sdma",		3 },
-    { 0x631,	"udma",		0 },
-    { 0x640,	"spanbit",	-2 },
-    { 0x641,	"scanbit",	-2 },
-    { 0x642,	"daddc",	3 },
-    { 0x643,	"dsubc",	3 },
-    { 0x644,	"dmovt",	-2 },
-    { 0x645,	"modac",	3 },
-    { 0x646,	"condrec",	-2 },
-    { 0x650,	"modify",	3 },
-    { 0x651,	"extract",	3 },
-    { 0x654,	"modtc",	3 },
-    { 0x655,	"modpc",	3 },
-    { 0x656,	"receive",	-2 },
-    { 0x658,	"intctl",	-2 },
-    { 0x659,	"sysctl",	3 },
-    { 0x65b,	"icctl",	3 },
-    { 0x65c,	"dcctl",	3 },
-    { 0x65d,	"halt",		0 },
-    { 0x660,	"calls",	1 },
-    { 0x662,	"send",		3 },
-    { 0x663,	"sendserv",	1 },
-    { 0x664,	"resumprcs",	1 },
-    { 0x665,	"schedprcs",	1 },
-    { 0x666,	"saveprcs",	0 },
-    { 0x668,	"condwait",	1 },
-    { 0x669,	"wait",		1 },
-    { 0x66a,	"signal",	1 },
-    { 0x66b,	"mark",		0 },
-    { 0x66c,	"fmark",	0 },
-    { 0x66d,	"flushreg",	0 },
-    { 0x66f,	"syncf",	0 },
-    { 0x670,	"emul",		3 },
-    { 0x671,	"ediv",		3 },
-    { 0x673,	"ldtime",	-1 },
-    { 0x674,	"Fcvtir",	-2 },
-    { 0x675,	"Fcvtilr",	-2 },
-    { 0x676,	"Fscalerl",	3 },
-    { 0x677,	"Fscaler",	3 },
-    { 0x680,	"Fatanr",	3 },
-    { 0x681,	"Flogepr",	3 },
-    { 0x682,	"Flogr",	3 },
-    { 0x683,	"Fremr",	3 },
-    { 0x684,	"Fcmpor",	2 },
-    { 0x685,	"Fcmpr",	2 },
-    { 0x688,	"Fsqrtr",	-2 },
-    { 0x689,	"Fexpr",	-2 },
-    { 0x68a,	"Flogbnr",	-2 },
-    { 0x68b,	"Froundr",	-2 },
-    { 0x68c,	"Fsinr",	-2 },
-    { 0x68d,	"Fcosr",	-2 },
-    { 0x68e,	"Ftanr",	-2 },
-    { 0x68f,	"Fclassr",	1 },
-    { 0x690,	"Fatanrl",	3 },
-    { 0x691,	"Flogeprl",	3 },
-    { 0x692,	"Flogrl",	3 },
-    { 0x693,	"Fremrl",	3 },
-    { 0x694,	"Fcmporl",	2 },
-    { 0x695,	"Fcmprl",	2 },
-    { 0x698,	"Fsqrtrl",	-2 },
-    { 0x699,	"Fexprl",	-2 },
-    { 0x69a,	"Flogbnrl",	-2 },
-    { 0x69b,	"Froundrl",	-2 },
-    { 0x69c,	"Fsinrl",	-2 },
-    { 0x69d,	"Fcosrl",	-2 },
-    { 0x69e,	"Ftanrl",	-2 },
-    { 0x69f,	"Fclassrl",	1 },
-    { 0x6c0,	"Fcvtri",	-2 },
-    { 0x6c1,	"Fcvtril",	-2 },
-    { 0x6c2,	"Fcvtzri",	-2 },
-    { 0x6c3,	"Fcvtzril",	-2 },
-    { 0x6c9,	"Fmovr",	-2 },
-    { 0x6d9,	"Fmovrl",	-2 },
-    { 0x6e1,	"Fmovre",	-2 },
-    { 0x6e2,	"Fcpysre",	3 },
-    { 0x6e3,	"Fcpyrsre",	3 },
-    { 0x701,	"mulo",		3 },
-    { 0x708,	"remo",		3 },
-    { 0x70b,	"divo",		3 },
-    { 0x741,	"muli",		3 },
-    { 0x748,	"remi",		3 },
-    { 0x749,	"modi",		3 },
-    { 0x74b,	"divi",		3 },
-    { 0x780,	"addono",	3 },
-    { 0x781,	"addino",	3 },
-    { 0x782,	"subono",	3 },
-    { 0x783,	"subino",	3 },
-    { 0x784,	"selno",	3 },
-    { 0x78b,	"Fdivr",	3 },
-    { 0x78c,	"Fmulr",	3 },
-    { 0x78d,	"Fsubr",	3 },
-    { 0x78f,	"Faddr",	3 },
-    { 0x790,	"addog",	3 },
-    { 0x791,	"addig",        3 },
-    { 0x792,	"subog",	3 },
-    { 0x793,	"subig",	3 },
-    { 0x794,	"selg",		3 },
-    { 0x79b,	"Fdivrl",	3 },
-    { 0x79c,	"Fmulrl",	3 },
-    { 0x79d,	"Fsubrl",	3 },
-    { 0x79f,	"Faddrl",	3 },
-    { 0x7a0,	"addoe",	3 },
-    { 0x7a1,	"addie",        3 },
-    { 0x7a2,	"suboe",	3 },
-    { 0x7a3,	"subie",	3 },
-    { 0x7a4,	"sele",		3 },
-    { 0x7b0,	"addoge",	3 },
-    { 0x7b1,	"addige",	3 },
-    { 0x7b2,	"suboge",	3 },
-    { 0x7b3,	"subige",	3 },
-    { 0x7b4,	"selge",	3 },
-    { 0x7c0,	"addol",	3 },
-    { 0x7c1,	"addil",	3 },
-    { 0x7c2,	"subol",	3 },
-    { 0x7c3,	"subil",	3 },
-    { 0x7c4,	"sell",		3 },
-    { 0x7d0,	"addone",	3 },
-    { 0x7d1,	"addine",	3 },
-    { 0x7d2,	"subone",	3 },
-    { 0x7d3,	"subine",	3 },
-    { 0x7d4,	"selne",	3 },
-    { 0x7e0,	"addole",	3 },
-    { 0x7e1,	"addile",	3 },
-    { 0x7e2,	"subole",	3 },
-    { 0x7e3,	"subile",	3 },
-    { 0x7e4,	"selle",	3 },
-    { 0x7f0,	"addoo",	3 },
-    { 0x7f1,	"addio",	3 },
-    { 0x7f2,	"suboo",	3 },
-    { 0x7f3,	"subio",	3 },
-    { 0x7f4,	"selo",		3 },
-#define REG_MAX 0x7f4
-    { 0,	NULL,		0 }
-  };
-  static struct tabent reg_tab_buf[REG_MAX - REG_MIN + 1];
-
-  if (reg_tab == NULL)
-    {
-      reg_tab = reg_tab_buf;
-
-      for (i = 0; reg_init[i].opcode != 0; i++)
-	{
-	  j = reg_init[i].opcode - REG_MIN;
-	  reg_tab[j].name = reg_init[i].name;
-	  reg_tab[j].numops = reg_init[i].numops;
-	}
-    }
-
-  opcode = ((word1 >> 20) & 0xff0) | ((word1 >> 7) & 0xf);
-  i = opcode - REG_MIN;
-
-  if ((opcode<REG_MIN) || (opcode>REG_MAX) || (reg_tab[i].name==NULL))
-    {
-      invalid (word1);
-      return;
-    }
-
-  mnemp = reg_tab[i].name;
-  if (*mnemp == 'F')
-    {
-      fp = 1;
-      mnemp++;
-    }
-  else
-    {
-      fp = 0;
-    }
-
-  (*info->fprintf_func) (stream, "%s", mnemp);
-
-  s1   = (word1 >> 5)  & 1;
-  s2   = (word1 >> 6)  & 1;
-  m1   = (word1 >> 11) & 1;
-  m2   = (word1 >> 12) & 1;
-  m3   = (word1 >> 13) & 1;
-  src  =  word1        & 0x1f;
-  src2 = (word1 >> 14) & 0x1f;
-  dst  = (word1 >> 19) & 0x1f;
-
-  if  (reg_tab[i].numops != 0)
-    {
-      (*info->fprintf_func) (stream, "\t");
-
-    switch (reg_tab[i].numops)
-      {
-      case 1:
-	regop (m1, s1, src, fp);
-	break;
-      case -1:
-	dstop (m3, dst, fp);
-	break;
-      case 2:
-	regop (m1, s1, src, fp);
-	(*info->fprintf_func) (stream, ",");
-	regop (m2, s2, src2, fp);
-	break;
-      case -2:
-	regop (m1, s1, src, fp);
-	(*info->fprintf_func) (stream, ",");
-	dstop (m3, dst, fp);
-	break;
-      case 3:
-	regop (m1, s1, src, fp);
-	(*info->fprintf_func) (stream, ",");
-	regop (m2, s2, src2, fp);
-	(*info->fprintf_func) (stream, ",");
-	dstop (m3, dst, fp);
-	break;
-      }
-    }
-}
-
-/* Print out effective address for memb instructions.  */
-
-static void
-ea (bfd_vma memaddr, int mode, const char *reg2, const char *reg3, int word1,
-    unsigned int word2)
-{
-  int scale;
-  static const int scale_tab[] = { 1, 2, 4, 8, 16 };
-
-  scale = (word1 >> 7) & 0x07;
-
-  if ((scale > 4) || (((word1 >> 5) & 0x03) != 0))
-    {
-      invalid (word1);
-      return;
-    }
-  scale = scale_tab[scale];
-
-  switch (mode)
-    {
-    case 4:						/* (reg) */
-      (*info->fprintf_func)( stream, "(%s)", reg2 );
-      break;
-    case 5:						/* displ+8(ip) */
-      print_addr (word2 + 8 + memaddr);
-      break;
-    case 7:						/* (reg)[index*scale] */
-      if (scale == 1)
-	(*info->fprintf_func) (stream, "(%s)[%s]", reg2, reg3);
-      else
-	(*info->fprintf_func) (stream, "(%s)[%s*%d]", reg2, reg3, scale);
-      break;
-    case 12:					/* displacement */
-      print_addr ((bfd_vma) word2);
-      break;
-    case 13:					/* displ(reg) */
-      print_addr ((bfd_vma) word2);
-      (*info->fprintf_func) (stream, "(%s)", reg2);
-      break;
-    case 14:					/* displ[index*scale] */
-      print_addr ((bfd_vma) word2);
-      if (scale == 1)
-	(*info->fprintf_func) (stream, "[%s]", reg3);
-      else
-	(*info->fprintf_func) (stream, "[%s*%d]", reg3, scale);
-      break;
-    case 15:				/* displ(reg)[index*scale] */
-      print_addr ((bfd_vma) word2);
-      if (scale == 1)
-	(*info->fprintf_func) (stream, "(%s)[%s]", reg2, reg3);
-      else
-	(*info->fprintf_func) (stream, "(%s)[%s*%d]", reg2, reg3, scale);
-      break;
-    default:
-      invalid (word1);
-      return;
-    }
-}
-
-
-/* Register Instruction Operand.  */
-
-static void
-regop (int mode, int spec, int fp_reg, int fp)
-{
-  if (fp)
-    {
-      /* Floating point instruction.  */
-      if (mode == 1)
-	{
-	  /* FP operand.  */
-	  switch (fp_reg)
-	    {
-	    case 0:  (*info->fprintf_func) (stream, "fp0");
-	      break;
-	    case 1:  (*info->fprintf_func) (stream, "fp1");
-	      break;
-	    case 2:  (*info->fprintf_func) (stream, "fp2");
-	      break;
-	    case 3:  (*info->fprintf_func) (stream, "fp3");
-	      break;
-	    case 16: (*info->fprintf_func) (stream, "0f0.0");
-	      break;
-	    case 22: (*info->fprintf_func) (stream, "0f1.0");
-	      break;
-	    default: (*info->fprintf_func) (stream, "?");
-	      break;
-	    }
-	}
-      else
-	{
-	  /* Non-FP register.  */
-	  (*info->fprintf_func) (stream, "%s", reg_names[fp_reg]);
-	}
-    }
-  else
-    {
-      /* Not floating point.  */
-      if (mode == 1)
-	{
-	  /* Literal.  */
-	  (*info->fprintf_func) (stream, "%d", fp_reg);
-	}
-      else
-	{
-	  /* Register.  */
-	  if (spec == 0)
-	    (*info->fprintf_func) (stream, "%s", reg_names[fp_reg]);
-	  else
-	    (*info->fprintf_func) (stream, "sf%d", fp_reg);
-	}
-    }
-}
-
-/* Register Instruction Destination Operand.  */
-
-static void
-dstop (int mode, int dest_reg, int fp)
-{
-  /* 'dst' operand can't be a literal. On non-FP instructions,  register
-     mode is assumed and "m3" acts as if were "s3";  on FP-instructions,
-     sf registers are not allowed so m3 acts normally.  */
-  if (fp)
-    regop (mode, 0, dest_reg, fp);
-  else
-    regop (0, mode, dest_reg, fp);
-}
-
-static void
-invalid (int word1)
-{
-  (*info->fprintf_func) (stream, ".word\t0x%08x", (unsigned) word1);
-}
-
-static void
-print_addr (bfd_vma a)
-{
-  (*info->print_address_func) (a, info);
-}
-
-static void
-put_abs (unsigned long word1 ATTRIBUTE_UNUSED,
-	 unsigned long word2 ATTRIBUTE_UNUSED)
-{
-#ifdef IN_GDB
-  return;
-#else
-  int len;
-
-  switch ((word1 >> 28) & 0xf)
-    {
-    case 0x8:
-    case 0x9:
-    case 0xa:
-    case 0xb:
-    case 0xc:
-      /* MEM format instruction.  */
-      len = mem (0, word1, word2, 1);
-      break;
-    default:
-      len = 4;
-      break;
-    }
-
-  if (len == 8)
-    (*info->fprintf_func) (stream, "%08x %08x\t", word1, word2);
-  else
-    (*info->fprintf_func) (stream, "%08x         \t", word1);
-#endif
-}
diff --git a/opcodes/po/POTFILES.in b/opcodes/po/POTFILES.in
index cb1b513..3a1fbd8 100644
--- a/opcodes/po/POTFILES.in
+++ b/opcodes/po/POTFILES.in
@@ -70,8 +70,6 @@ i386-init.h
 i386-opc.c
 i386-opc.h
 i386-tbl.h
-i860-dis.c
-i960-dis.c
 ia64-asmtab.c
 ia64-asmtab.h
 ia64-dis.c