aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorRichard Sandiford <rdsandiford@googlemail.com>2013-06-22 16:18:45 +0000
committerRichard Sandiford <rdsandiford@googlemail.com>2013-06-22 16:18:45 +0000
commit98508b2a6e834c89b68ee2cbef4d4da5169505ef (patch)
treef71e83a179ae2b2057eab999e943b40e3971227f
parentfc16f8cc9b44c198b6f753e4f39ad2334502893f (diff)
downloadgdb-98508b2a6e834c89b68ee2cbef4d4da5169505ef.zip
gdb-98508b2a6e834c89b68ee2cbef4d4da5169505ef.tar.gz
gdb-98508b2a6e834c89b68ee2cbef4d4da5169505ef.tar.bz2
gas/
* doc/as.texinfo: Use MIPS rather than @sc{mips} throughout. Use "CPU" instead of "cpu". * doc/c-mips.texi: Likewise. (MIPS Opts): Rename to MIPS Options. (MIPS option stack): Rename to MIPS Option Stack. (MIPS ASE instruction generation overrides): Rename to MIPS ASE Instruction Generation Overrides (for now). (MIPS floating-point): Rename to MIPS Floating-Point.
-rw-r--r--gas/ChangeLog11
-rw-r--r--gas/doc/as.texinfo12
-rw-r--r--gas/doc/c-mips.texi72
3 files changed, 53 insertions, 42 deletions
diff --git a/gas/ChangeLog b/gas/ChangeLog
index 7d6b4a4..983acfe 100644
--- a/gas/ChangeLog
+++ b/gas/ChangeLog
@@ -1,5 +1,16 @@
2013-06-22 Richard Sandiford <rdsandiford@googlemail.com>
+ * doc/as.texinfo: Use MIPS rather than @sc{mips} throughout.
+ Use "CPU" instead of "cpu".
+ * doc/c-mips.texi: Likewise.
+ (MIPS Opts): Rename to MIPS Options.
+ (MIPS option stack): Rename to MIPS Option Stack.
+ (MIPS ASE instruction generation overrides): Rename to
+ MIPS ASE Instruction Generation Overrides (for now).
+ (MIPS floating-point): Rename to MIPS Floating-Point.
+
+2013-06-22 Richard Sandiford <rdsandiford@googlemail.com>
+
* doc/c-mips.texi (MIPS Macros): New section.
(MIPS Object): Replace with...
(MIPS Small Data): ...this new section.
diff --git a/gas/doc/as.texinfo b/gas/doc/as.texinfo
index 557d5e8..9b1b9dd 100644
--- a/gas/doc/as.texinfo
+++ b/gas/doc/as.texinfo
@@ -1219,7 +1219,7 @@ behaviour in the shell.
@ifset MIPS
The following options are available when @value{AS} is configured for
-a @sc{mips} processor.
+a MIPS processor.
@table @gcctabopt
@item -G @var{num}
@@ -1247,7 +1247,7 @@ Generate ``little endian'' format output.
@itemx -mips32r2
@itemx -mips64
@itemx -mips64r2
-Generate code for a particular @sc{mips} Instruction Set Architecture level.
+Generate code for a particular MIPS Instruction Set Architecture level.
@samp{-mips1} is an alias for @samp{-march=r3000}, @samp{-mips2} is an
alias for @samp{-march=r6000}, @samp{-mips3} is an alias for
@samp{-march=r4000} and @samp{-mips4} is an alias for @samp{-march=r8000}.
@@ -1258,11 +1258,11 @@ correspond to generic
and @samp{MIPS64 Release 2}
ISA processors, respectively.
-@item -march=@var{CPU}
-Generate code for a particular @sc{mips} cpu.
+@item -march=@var{cpu}
+Generate code for a particular MIPS CPU.
@item -mtune=@var{cpu}
-Schedule and tune for a particular @sc{mips} cpu.
+Schedule and tune for a particular MIPS CPU.
@item -mfix7000
@itemx -mno-fix7000
@@ -1370,7 +1370,7 @@ in the name. Using @samp{-EB} or @samp{-EL} will override the endianness
selection in any case.
This option is currently supported only when the primary target
-@command{@value{AS}} is configured for is a @sc{mips} ELF or ECOFF target.
+@command{@value{AS}} is configured for is a MIPS ELF or ECOFF target.
Furthermore, the primary target or others specified with
@samp{--enable-targets=@dots{}} at configuration time must include support for
the other format, if both are to be available. For example, the Irix 5
diff --git a/gas/doc/c-mips.texi b/gas/doc/c-mips.texi
index aa48f6c..5b46ff6 100644
--- a/gas/doc/c-mips.texi
+++ b/gas/doc/c-mips.texi
@@ -14,32 +14,32 @@
@end ifclear
@cindex MIPS processor
-@sc{gnu} @code{@value{AS}} for @sc{mips} architectures supports several
-different @sc{mips} processors, and MIPS ISA levels I through V, MIPS32,
-and MIPS64. For information about the @sc{mips} instruction set, see
+@sc{gnu} @code{@value{AS}} for MIPS architectures supports several
+different MIPS processors, and MIPS ISA levels I through V, MIPS32,
+and MIPS64. For information about the MIPS instruction set, see
@cite{MIPS RISC Architecture}, by Kane and Heindrich (Prentice-Hall).
-For an overview of @sc{mips} assembly conventions, see ``Appendix D:
+For an overview of MIPS assembly conventions, see ``Appendix D:
Assembly Language Programming'' in the same work.
@menu
-* MIPS Opts:: Assembler options
+* MIPS Options:: Assembler options
* MIPS Macros:: High-level assembly macros
* MIPS Symbol Sizes:: Directives to override the size of symbols
* MIPS Small Data:: Controlling the use of small data accesses
* MIPS ISA:: Directives to override the ISA level
* MIPS autoextend:: Directives for extending MIPS 16 bit instructions
* MIPS insn:: Directive to mark data as an instruction
-* MIPS option stack:: Directives to save and restore options
-* MIPS ASE instruction generation overrides:: Directives to control
+* MIPS Option Stack:: Directives to save and restore options
+* MIPS ASE Instruction Generation Overrides:: Directives to control
generation of MIPS ASE instructions
-* MIPS floating-point:: Directives to override floating-point options
+* MIPS Floating-Point:: Directives to override floating-point options
* MIPS Syntax:: MIPS specific syntactical considerations
@end menu
-@node MIPS Opts
+@node MIPS Options
@section Assembler options
-The @sc{mips} configurations of @sc{gnu} @code{@value{AS}} support these
+The MIPS configurations of @sc{gnu} @code{@value{AS}} support these
special options:
@table @code
@@ -56,7 +56,7 @@ Set the ``small data'' limit to @var{n} bytes. The default limit is 8 bytes.
@cindex little-endian output, MIPS
@item -EB
@itemx -EL
-Any @sc{mips} configuration of @code{@value{AS}} can select big-endian or
+Any MIPS configuration of @code{@value{AS}} can select big-endian or
little-endian output at run time (unlike the other @sc{gnu} development
tools, which must be configured for one or the other). Use @samp{-EB}
to select big-endian output, and @samp{-EL} for little-endian.
@@ -84,10 +84,10 @@ VxWorks-style position-independent macro expansions.
@itemx -mips64
@itemx -mips64r2
Generate code for a particular MIPS Instruction Set Architecture level.
-@samp{-mips1} corresponds to the @sc{r2000} and @sc{r3000} processors,
-@samp{-mips2} to the @sc{r6000} processor, @samp{-mips3} to the
-@sc{r4000} processor, and @samp{-mips4} to the @sc{r8000} and
-@sc{r10000} processors. @samp{-mips5}, @samp{-mips32}, @samp{-mips32r2},
+@samp{-mips1} corresponds to the R2000 and R3000 processors,
+@samp{-mips2} to the R6000 processor, @samp{-mips3} to the
+R4000 processor, and @samp{-mips4} to the R8000 and
+R10000 processors. @samp{-mips5}, @samp{-mips32}, @samp{-mips32r2},
@samp{-mips64}, and @samp{-mips64r2}
correspond to generic
@sc{MIPS V}, @sc{MIPS32}, @sc{MIPS32 Release 2}, @sc{MIPS64},
@@ -201,8 +201,8 @@ batches, but this fix has no side effect to them.
@item -mfix-loongson2f-nop
@itemx -mno-fix-loongson2f-nop
Replace nops by @code{or at,at,zero} to work around the Loongson2F
-@samp{nop} errata. Without it, under extreme cases, cpu might
-deadlock. The issue has been solved in latest loongson2f batches, but
+@samp{nop} errata. Without it, under extreme cases, the CPU might
+deadlock. The issue has been solved in later Loongson2F batches, but
this fix has no side effect to them.
@item -mfix-vr4120
@@ -226,15 +226,15 @@ certain CN63XXP1 errata.
@item -m4010
@itemx -no-m4010
-Generate code for the LSI @sc{r4010} chip. This tells the assembler to
-accept the @sc{r4010} specific instructions (@samp{addciu}, @samp{ffc},
+Generate code for the LSI R4010 chip. This tells the assembler to
+accept the R4010-specific instructions (@samp{addciu}, @samp{ffc},
etc.), and to not schedule @samp{nop} instructions around accesses to
the @samp{HI} and @samp{LO} registers. @samp{-no-m4010} turns off this
option.
@item -m4650
@itemx -no-m4650
-Generate code for the MIPS @sc{r4650} chip. This tells the assembler to accept
+Generate code for the MIPS R4650 chip. This tells the assembler to accept
the @samp{mad} and @samp{madu} instruction, and to not schedule @samp{nop}
instructions around accesses to the @samp{HI} and @samp{LO} registers.
@samp{-no-m4650} turns off this option.
@@ -244,11 +244,11 @@ instructions around accesses to the @samp{HI} and @samp{LO} registers.
@itemx -m4100
@itemx -no-m4100
For each option @samp{-m@var{nnnn}}, generate code for the MIPS
-@sc{r@var{nnnn}} chip. This tells the assembler to accept instructions
+R@var{nnnn} chip. This tells the assembler to accept instructions
specific to that chip, and to schedule for that chip's hazards.
@item -march=@var{cpu}
-Generate code for a particular MIPS cpu. It is exactly equivalent to
+Generate code for a particular MIPS CPU. It is exactly equivalent to
@samp{-m@var{cpu}}, except that there are more value of @var{cpu}
understood. Valid @var{cpu} value are:
@@ -340,7 +340,7 @@ accepted as synonyms for @samp{@var{n}f1_1}. These values are
deprecated.
@item -mtune=@var{cpu}
-Schedule and tune for a particular MIPS cpu. Valid @var{cpu} values are
+Schedule and tune for a particular MIPS CPU. Valid @var{cpu} values are
identical to @samp{-march=@var{cpu}}.
@item -mabi=@var{abi}
@@ -464,8 +464,8 @@ integer constants. For example, the architectural instruction
@code{lbu} allows only a signed 16-bit offset, whereas the macro
@code{lbu} allows code such as @samp{lbu $4,array+32769($5)}.
The implementation of these symbolic offsets depends on several factors,
-such as whether the assembler is generating SVR4-style PIC (selected
-by @option{-KPIC}, @pxref{MIPS Opts,, Assembler options}), the size of symbols
+such as whether the assembler is generating SVR4-style PIC (selected by
+@option{-KPIC}, @pxref{MIPS Options,, Assembler options}), the size of symbols
(@pxref{MIPS Symbol Sizes,, Directives to override the size of symbols}),
and the small data limit (@pxref{MIPS Small Data,, Controlling the use
of small data accesses}).
@@ -577,7 +577,7 @@ In order to cut down on this overhead, most embedded MIPS systems
set aside a 64-kilobyte ``small data'' area and guarantee that all
data of size @var{n} and smaller will be placed in that area.
The limit @var{n} is passed to both the assembler and the linker
-using the command-line option @option{-G @var{n}}, @pxref{MIPS Opts,,
+using the command-line option @option{-G @var{n}}, @pxref{MIPS Options,,
Assembler options}. Note that the same value of @var{n} must be used
when linking and when assembling all input files to the link; any
inconsistency could cause a relocation overflow error.
@@ -616,7 +616,7 @@ Small data is not supported for SVR4-style PIC.
@cindex MIPS ISA override
@kindex @code{.set mips@var{n}}
@sc{gnu} @code{@value{AS}} supports an additional directive to change
-the @sc{mips} Instruction Set Architecture level on the fly: @code{.set
+the MIPS Instruction Set Architecture level on the fly: @code{.set
mips@var{n}}. @var{n} should be a number from 0 to 5, or 32, 32r2, 64
or 64r2.
The values other than 0 make the assembler accept instructions
@@ -641,13 +641,13 @@ The directive @code{.set mips16} puts the assembler into MIPS 16 mode,
in which it will assemble instructions for the MIPS 16 processor. Use
@code{.set nomips16} to return to normal 32 bit mode.
-Traditional @sc{mips} assemblers do not support this directive.
+Traditional MIPS assemblers do not support this directive.
The directive @code{.set micromips} puts the assembler into microMIPS mode,
in which it will assemble instructions for the microMIPS processor. Use
@code{.set nomicromips} to return to normal 32 bit mode.
-Traditional @sc{mips} assemblers do not support this directive.
+Traditional MIPS assemblers do not support this directive.
@node MIPS autoextend
@section Directives for extending MIPS 16 bit instructions
@@ -662,7 +662,7 @@ must be explicitly extended with the @code{.e} modifier (e.g.,
to once again automatically extend instructions when necessary.
This directive is only meaningful when in MIPS 16 mode. Traditional
-@sc{mips} assemblers do not support this directive.
+MIPS assemblers do not support this directive.
@node MIPS insn
@section Directive to mark data as an instruction
@@ -700,7 +700,7 @@ baz:
@end example
-@node MIPS option stack
+@node MIPS Option Stack
@section Directives to save and restore options
@cindex MIPS option stack
@@ -716,9 +716,9 @@ These directives can be useful inside an macro which must change an
option such as the ISA level or instruction reordering but does not want
to change the state of the code which invoked the macro.
-Traditional @sc{mips} assemblers do not support these directives.
+Traditional MIPS assemblers do not support these directives.
-@node MIPS ASE instruction generation overrides
+@node MIPS ASE Instruction Generation Overrides
@section Directives to control generation of MIPS ASE instructions
@cindex MIPS MIPS-3D instruction generation override
@@ -787,9 +787,9 @@ from the Virtualization Application Specific Extension from that point
on in the assembly. The @code{.set novirt} directive prevents Virtualization
instructions from being accepted.
-Traditional @sc{mips} assemblers do not support these directives.
+Traditional MIPS assemblers do not support these directives.
-@node MIPS floating-point
+@node MIPS Floating-Point
@section Directives to override floating-point options
@cindex Disable floating-point instructions
@@ -810,7 +810,7 @@ float-point operations. These directives always override the default
(that double-precision operations are accepted) or the command-line
options (@samp{-msingle-float} and @samp{-mdouble-float}).
-Traditional @sc{mips} assemblers do not support these directives.
+Traditional MIPS assemblers do not support these directives.
@node MIPS Syntax
@section Syntactical considerations for the MIPS assembler