* mips-mdebug-tdep.c, mips-mdebug-tdep.h, ocd.c, ocd.h, ppc-bdm.c,

	remote-e7000.c, remote-hms.c, remote-utils.c, remote-utils.h,
	scm-exp.c, scm-lang.c, scm-lang.h, scm-tags.h, scm-valprint.c,
	ser-e7kpc.c, sh3-rom.c, stop-gdb.c: Delete.
	* Makefile.in: Remove references to deleted files.
	* README: Do not mention deleted ROM monitor interfaces.
	* defs.h (enum language): Delete language_scm.
	* expprint.c (print_subexp_standard): Do not handle OP_EXPRSTRING.
	(dump_subexp_body_standard): Likewise.
	* parse.c (operator_length_standard): Likewise.
	* expression.h (enum exp_opcode): Delete OP_EXPRSTRING.
	* remote-mips.c: Do not include remote-utils.h.
	* remote-sim.c: Likewise.  Use remote_debug instead of sr_get_debug
	throughout.
	* value.c: Do not include scm-lang.h.
	(unpack_long): Delete scm_unpack call.
	* config/h8300/h8300.mt, config/mips/embed.mt,
	config/powerpc/ppc-eabi.mt, config/powerpc/ppc-sim.mt,
	config/sh/embed.mt, config/sh/linux.mt: Remove references to
	deleted files.
	* NEWS: Mention removed files.

	* gdb.texinfo (Memory): Reference Remote Debugging chapter.
	(Character Sets, Caching Data of Remote Targets): Likewise.
	(Targets): Delete Remote node.  Move its text...
	(Debugging Remote Programs): ...to here.  Delete description
	of the "remote" command.
	(Remote configuration): Delete description of "set remotedevice"
	and "show remotedevice".
	(Embedded Processors): Delete H8/300, H8/500, and SH nodes.

19 files changed, 94 insertions, 410 deletions

diff --git a/gdb/ChangeLog b/gdb/ChangeLog
index 8a4e62c..418550a 100644
--- a/gdb/ChangeLog
+++ b/gdb/ChangeLog
@@ -1,5 +1,29 @@
 2007-04-13  Daniel Jacobowitz  <dan@codesourcery.com>
 
+	* mips-mdebug-tdep.c, mips-mdebug-tdep.h, ocd.c, ocd.h, ppc-bdm.c,
+	remote-e7000.c, remote-hms.c, remote-utils.c, remote-utils.h,
+	scm-exp.c, scm-lang.c, scm-lang.h, scm-tags.h, scm-valprint.c,
+	ser-e7kpc.c, sh3-rom.c, stop-gdb.c: Delete.
+	* Makefile.in: Remove references to deleted files.
+	* README: Do not mention deleted ROM monitor interfaces.
+	* defs.h (enum language): Delete language_scm.
+	* expprint.c (print_subexp_standard): Do not handle OP_EXPRSTRING.
+	(dump_subexp_body_standard): Likewise.
+	* parse.c (operator_length_standard): Likewise.
+	* expression.h (enum exp_opcode): Delete OP_EXPRSTRING.
+	* remote-mips.c: Do not include remote-utils.h.
+	* remote-sim.c: Likewise.  Use remote_debug instead of sr_get_debug
+	throughout.
+	* value.c: Do not include scm-lang.h.
+	(unpack_long): Delete scm_unpack call.
+	* config/h8300/h8300.mt, config/mips/embed.mt,
+	config/powerpc/ppc-eabi.mt, config/powerpc/ppc-sim.mt,
+	config/sh/embed.mt, config/sh/linux.mt: Remove references to
+	deleted files.
+	* NEWS: Mention removed files.
+
+2007-04-13  Daniel Jacobowitz  <dan@codesourcery.com>
+
 	* symfile.c (add_psymbol_with_dem_name_to_list): Remove.
 	* symfile.h (add_psymbol_with_dem_name_to_list): Remove prototype.
 
diff --git a/gdb/Makefile.in b/gdb/Makefile.in
index 1f968cf..9502431 100644
--- a/gdb/Makefile.in
+++ b/gdb/Makefile.in
@@ -415,7 +415,7 @@ SER_HARDWIRE = @SER_HARDWIRE@
 
 # The `remote' debugging target is supported for most architectures,
 # but not all (e.g. 960)
-REMOTE_OBS = remote.o dcache.o remote-utils.o tracepoint.o ax-general.o ax-gdb.o remote-fileio.o
+REMOTE_OBS = remote.o dcache.o tracepoint.o ax-general.o ax-gdb.o remote-fileio.o
 
 # This is remote-sim.o if a simulator is to be linked in.
 SIM_OBS =
@@ -552,7 +552,6 @@ SFILES = ada-exp.y ada-lang.c ada-typeprint.c ada-valprint.c  \
 	p-exp.y p-lang.c p-typeprint.c p-valprint.c parse.c printcmd.c \
 	prologue-value.c \
 	regcache.c reggroups.c remote.c remote-fileio.c \
-	scm-exp.c scm-lang.c scm-valprint.c \
 	sentinel-frame.c \
 	serial.c ser-base.c ser-unix.c \
 	solib.c solib-null.c source.c \
@@ -758,7 +757,6 @@ main_h = main.h
 mdebugread_h = mdebugread.h $(coff_sym_h) $(coff_symconst_h)
 memattr_h = memattr.h $(vec_h)
 mips_linux_tdep_h = mips-linux-tdep.h
-mips_mdebug_tdep_h = mips-mdebug-tdep.h
 mipsnbsd_tdep_h = mipsnbsd-tdep.h
 mips_tdep_h = mips-tdep.h
 memory_map_h = memory-map.h $(memattr_h)
@@ -770,7 +768,6 @@ nto_tdep_h = nto-tdep.h $(defs_h) $(solist_h) $(osabi_h) $(regset_h)
 objc_lang_h = objc-lang.h
 objfiles_h = objfiles.h $(gdb_obstack_h) $(symfile_h)
 obsd_tdep_h = obsd-tdep.h
-ocd_h = ocd.h
 osabi_h = osabi.h
 parser_defs_h = parser-defs.h $(doublest_h)
 p_lang_h = p-lang.h
@@ -784,11 +781,8 @@ reggroups_h = reggroups.h
 regset_h = regset.h
 remote_fileio_h = remote-fileio.h
 remote_h = remote.h
-remote_utils_h = remote-utils.h $(target_h)
 rs6000_tdep_h = rs6000-tdep.h $(defs_h)
 s390_tdep_h = s390-tdep.h
-scm_lang_h = scm-lang.h $(scm_tags_h)
-scm_tags_h = scm-tags.h
 score_tdep_h = score-tdep.h
 sentinel_frame_h = sentinel-frame.h
 serial_h = serial.h
@@ -900,7 +894,7 @@ HFILES_NO_SRCDIR = bcache.h buildsym.h call-cmds.h defs.h \
 	m2-lang.h  p-lang.h \
 	complaints.h valprint.h \
 	gdbthread.h \
-	dcache.h remote-utils.h top.h solib-som.h
+	dcache.h top.h solib-som.h
 
 # Header files that already have srcdir in them, or which are in objdir.
 
@@ -960,7 +954,6 @@ COMMON_OBS = $(DEPFILES) $(CONFIG_OBS) $(YYOBJ) \
 	varobj.o vec.o wrapper.o \
 	jv-lang.o jv-valprint.o jv-typeprint.o \
 	m2-lang.o p-lang.o p-typeprint.o p-valprint.o \
-	scm-exp.o scm-lang.o scm-valprint.o \
 	sentinel-frame.o \
 	complaints.o typeprint.o \
 	ada-typeprint.o c-typeprint.o f-typeprint.o m2-typeprint.o \
@@ -1244,12 +1237,6 @@ libgdb.a: $(LIBGDB_OBS)
 	$(AR) q libgdb.a $(LIBGDB_OBS)
 	$(RANLIB) libgdb.a
 
-# A Mach 3.0 program to force gdb back to command level
-
-stop-gdb: stop-gdb.o
-	${CC_LD} $(GLOBAL_CFLAGS) $(LDFLAGS) -o stop-gdb \
-	stop-gdb.o $(CLIBS) $(LOADLIBES)
-
 # This is useful when debugging GDB, because some Unix's don't let you run GDB
 # on itself without copying the executable.  So "make gdb1" will make
 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
@@ -1489,10 +1476,9 @@ ALLDEPFILES = \
 	ppcnbsd-nat.c ppcnbsd-tdep.c \
 	ppcobsd-nat.c ppcobsd-tdep.c \
 	procfs.c \
-	remote-e7000.c \
-	remote-hms.c remote-m32r-sdi.c remote-mips.c \
+	remote-m32r-sdi.c remote-mips.c \
 	remote-sim.c \
-	remote-utils.c dcache.c \
+	dcache.c \
 	rs6000-nat.c rs6000-tdep.c \
 	s390-tdep.c s390-nat.c \
 	score-tdep.c \
@@ -2362,10 +2348,6 @@ mips-linux-tdep.o: mips-linux-tdep.c $(defs_h) $(gdbcore_h) $(target_h) \
 	$(gdb_assert_h) $(frame_h) $(regcache_h) $(trad_frame_h) \
 	$(tramp_frame_h) $(gdbtypes_h) $(solib_h) $(symtab_h) \
 	$(mips_linux_tdep_h)
-mips-mdebug-tdep.o: mips-mdebug-tdep.c $(defs_h) $(frame_h) $(mips_tdep_h) \
-	$(trad_frame_h) $(block_h) $(symtab_h) $(objfiles_h) $(elf_mips_h) \
-	$(elf_bfd_h) $(gdb_assert_h) $(frame_unwind_h) $(frame_base_h) \
-	$(mips_mdebug_tdep_h) $(mdebugread_h)
 mipsnbsd-nat.o: mipsnbsd-nat.c $(defs_h) $(inferior_h) $(regcache_h) \
 	$(target_h) $(mips_tdep_h) $(mipsnbsd_tdep_h) $(inf_ptrace_h)
 mipsnbsd-tdep.o: mipsnbsd-tdep.c $(defs_h) $(gdbcore_h) $(regcache_h) \
@@ -2429,9 +2411,6 @@ objfiles.o: objfiles.c $(defs_h) $(bfd_h) $(symtab_h) $(symfile_h) \
 observer.o: observer.c $(defs_h) $(observer_h) $(command_h) $(gdbcmd_h) \
 	$(observer_inc)
 obsd-tdep.o: obsd-tdep.c $(defs_h) $(frame_h) $(symtab_h) $(obsd_tdep_h)
-ocd.o: ocd.c $(defs_h) $(gdbcore_h) $(gdb_string_h) $(frame_h) $(inferior_h) \
-	$(bfd_h) $(symfile_h) $(target_h) $(exceptions_h) $(gdbcmd_h) \
-	$(objfiles_h) $(gdb_stabs_h) $(serial_h) $(ocd_h) $(regcache_h)
 osabi.o: osabi.c $(defs_h) $(gdb_assert_h) $(gdb_string_h) $(osabi_h) \
 	$(arch_utils_h) $(gdbcmd_h) $(command_h) $(elf_bfd_h)
 parse.o: parse.c $(defs_h) $(gdb_string_h) $(symtab_h) $(gdbtypes_h) \
@@ -2445,10 +2424,6 @@ p-lang.o: p-lang.c $(defs_h) $(gdb_string_h) $(symtab_h) $(gdbtypes_h) \
 	$(expression_h) $(parser_defs_h) $(language_h) $(p_lang_h) \
 	$(valprint_h) $(value_h)
 posix-hdep.o: posix-hdep.c $(defs_h) $(gdb_string_h) $(gdb_select_h)
-ppc-bdm.o: ppc-bdm.c $(defs_h) $(gdbcore_h) $(gdb_string_h) $(frame_h) \
-	$(inferior_h) $(bfd_h) $(symfile_h) $(target_h) $(gdbcmd_h) \
-	$(objfiles_h) $(gdb_stabs_h) $(serial_h) $(ocd_h) $(ppc_tdep_h) \
-	$(regcache_h) $(gdb_assert_h)
 ppcbug-rom.o: ppcbug-rom.c $(defs_h) $(gdbcore_h) $(target_h) $(monitor_h) \
 	$(serial_h) $(regcache_h)
 ppc-linux-nat.o: ppc-linux-nat.c $(defs_h) $(gdb_string_h) $(frame_h) \
@@ -2515,10 +2490,6 @@ remote.o: remote.c $(defs_h) $(gdb_string_h) $(inferior_h) $(bfd_h) \
 	$(gdb_assert_h) $(event_loop_h) $(event_top_h) $(inf_loop_h) \
 	$(serial_h) $(gdbcore_h) $(remote_fileio_h) $(solib_h) $(observer_h) \
 	$(cli_decode_h) $(cli_setshow_h) $(memory_map_h) $(target_descriptions_h)
-remote-e7000.o: remote-e7000.c $(defs_h) $(gdbcore_h) $(gdbarch_h) \
-	$(inferior_h) $(target_h) $(value_h) $(command_h) $(gdb_string_h) \
-	$(exceptions_h) $(gdbcmd_h) $(serial_h) $(remote_utils_h) \
-	$(symfile_h) $(regcache_h)
 remote-fileio.o: remote-fileio.c $(defs_h) $(gdb_string_h) $(gdbcmd_h) \
 	$(remote_h) $(gdb_fileio_h) $(gdb_wait_h) $(gdb_stat_h) \
 	$(exceptions_h) $(remote_fileio_h)
@@ -2528,16 +2499,13 @@ remote-m32r-sdi.o: remote-m32r-sdi.c $(defs_h) $(gdbcmd_h) $(gdbcore_h) \
 	$(inferior_h) $(target_h) $(regcache_h) $(gdb_string_h) $(serial_h)
 remote-mips.o: remote-mips.c $(defs_h) $(inferior_h) $(bfd_h) $(symfile_h) \
 	$(gdbcmd_h) $(gdbcore_h) $(serial_h) $(target_h) $(exceptions_h) \
-	$(remote_utils_h) $(gdb_string_h) $(gdb_stat_h) $(regcache_h) \
+	$(gdb_string_h) $(gdb_stat_h) $(regcache_h) \
 	$(mips_tdep_h)
 remote-sim.o: remote-sim.c $(defs_h) $(inferior_h) $(value_h) \
 	$(gdb_string_h) $(terminal_h) $(target_h) $(gdbcore_h) \
-	$(gdb_callback_h) $(gdb_remote_sim_h) $(remote_utils_h) $(command_h) \
+	$(gdb_callback_h) $(gdb_remote_sim_h) $(command_h) \
 	$(regcache_h) $(gdb_assert_h) $(sim_regno_h) $(arch_utils_h) \
 	$(readline_h)
-remote-utils.o: remote-utils.c $(defs_h) $(gdb_string_h) $(gdbcmd_h) \
-	$(target_h) $(serial_h) $(gdbcore_h) $(inferior_h) $(remote_utils_h) \
-	$(regcache_h)
 rs6000-nat.o: rs6000-nat.c $(defs_h) $(inferior_h) $(target_h) $(gdbcore_h) \
 	$(xcoffsolib_h) $(symfile_h) $(objfiles_h) $(libbfd_h) $(bfd_h) \
 	$(exceptions_h) $(gdb_stabs_h) $(regcache_h) $(arch_utils_h) \
@@ -2560,22 +2528,12 @@ s390-tdep.o: s390-tdep.c $(defs_h) $(arch_utils_h) $(frame_h) $(inferior_h) \
 	$(frame_unwind_h) $(dwarf2_frame_h) $(reggroups_h) $(regset_h) \
 	$(value_h) $(gdb_assert_h) $(dis_asm_h) $(solib_svr4_h) \
 	$(prologue_value_h) $(s390_tdep_h)
-scm-exp.o: scm-exp.c $(defs_h) $(symtab_h) $(gdbtypes_h) $(expression_h) \
-	$(parser_defs_h) $(language_h) $(value_h) $(c_lang_h) $(scm_lang_h) \
-	$(scm_tags_h)
-scm-lang.o: scm-lang.c $(defs_h) $(symtab_h) $(gdbtypes_h) $(expression_h) \
-	$(parser_defs_h) $(language_h) $(value_h) $(c_lang_h) $(scm_lang_h) \
-	$(scm_tags_h) $(source_h) $(gdb_string_h) $(gdbcore_h) $(infcall_h)
-scm-valprint.o: scm-valprint.c $(defs_h) $(symtab_h) $(gdbtypes_h) \
-	$(expression_h) $(parser_defs_h) $(language_h) $(value_h) \
-	$(scm_lang_h) $(valprint_h) $(gdbcore_h) $(c_lang_h)
 score-tdep.o: score-tdep.c $(defs_h) $(gdb_assert_h) $(inferior_h) \
 	$(symtab_h) $(objfiles_h) $(gdbcore_h) $(target_h) \
 	$(arch_utils_h) $(regcache_h) $(dis_asm_h) $(frame_unwind_h) \
 	$(frame_base_h) $(trad_frame_h) $(dwarf2_frame_h) $(score_tdep_h)
 sentinel-frame.o: sentinel-frame.c $(defs_h) $(regcache_h) \
 	$(sentinel_frame_h) $(inferior_h) $(frame_unwind_h)
-ser-e7kpc.o: ser-e7kpc.c $(defs_h) $(serial_h) $(gdb_string_h)
 ser-go32.o: ser-go32.c $(defs_h) $(gdbcmd_h) $(serial_h) $(gdb_string_h)
 serial.o: serial.c $(defs_h) $(serial_h) $(gdb_string_h) $(gdbcmd_h)
 ser-base.o: ser-base.c $(defs_h) $(serial_h) $(ser_base_h) $(event_loop_h) \
@@ -2588,9 +2546,6 @@ ser-unix.o: ser-unix.c $(defs_h) $(serial_h) $(ser_base_h) $(ser_unix_h) \
 	$(terminal_h) $(gdb_select_h) $(gdb_string_h)
 ser-mingw.o: ser-mingw.c $(defs_h) $(serial_h) $(ser_base_h) \
 	$(ser_tcp_h) $(gdb_assert_h) $(gdb_string_h)
-sh3-rom.o: sh3-rom.c $(defs_h) $(gdbcore_h) $(target_h) $(monitor_h) \
-	$(serial_h) $(srec_h) $(arch_utils_h) $(regcache_h) $(gdb_string_h) \
-	$(sh_tdep_h)
 sh64-tdep.o: sh64-tdep.c $(defs_h) $(frame_h) $(frame_base_h) \
 	$(frame_unwind_h) $(dwarf2_frame_h) $(symtab_h) $(gdbtypes_h) \
 	$(gdbcmd_h) $(gdbcore_h) $(value_h) $(dis_asm_h) $(inferior_h) \
@@ -2744,7 +2699,6 @@ stack.o: stack.c $(defs_h) $(value_h) $(symtab_h) $(gdbtypes_h) \
 	$(valprint_h) $(gdb_assert_h) $(gdb_string_h)
 std-regs.o: std-regs.c $(defs_h) $(user_regs_h) $(frame_h) $(gdbtypes_h) \
 	$(value_h) $(gdb_string_h)
-stop-gdb.o: stop-gdb.c $(defs_h)
 symfile.o: symfile.c $(defs_h) $(bfdlink_h) $(symtab_h) $(gdbtypes_h) \
 	$(gdbcore_h) $(frame_h) $(target_h) $(value_h) $(symfile_h) \
 	$(objfiles_h) $(source_h) $(gdbcmd_h) $(breakpoint_h) $(language_h) \
@@ -2833,7 +2787,7 @@ valprint.o: valprint.c $(defs_h) $(gdb_string_h) $(symtab_h) $(gdbtypes_h) \
 	$(exceptions_h)
 value.o: value.c $(defs_h) $(gdb_string_h) $(symtab_h) $(gdbtypes_h) \
 	$(value_h) $(gdbcore_h) $(command_h) $(gdbcmd_h) $(target_h) \
-	$(language_h) $(scm_lang_h) $(demangle_h) $(doublest_h) \
+	$(language_h) $(demangle_h) $(doublest_h) \
 	$(gdb_assert_h) $(regcache_h) $(block_h)
 varobj.o: varobj.c $(defs_h) $(exceptions_h) $(value_h) $(expression_h) \
 	$(frame_h) $(language_h) $(wrapper_h) $(gdbcmd_h) $(block_h) \
diff --git a/gdb/NEWS b/gdb/NEWS
index 5bf8353..d549f00 100644
--- a/gdb/NEWS
+++ b/gdb/NEWS
@@ -122,6 +122,20 @@ target rom68k
 
 	Various m68k-only ROM monitors.
 
+target hms
+target e7000
+target sh3
+target sh3e
+
+	Various Renesas ROM monitors and debugging interfaces for SH and
+	H8/300.
+
+target ocd
+
+	Support for a Macraigor serial interface to on-chip debugging.
+	GDB does not directly support the newer parallel or USB
+	interfaces.
+
 DWARF 1 support
 
 	A debug information format.  The predecessor to DWARF 2 and 
@@ -134,6 +148,16 @@ Support for the HP aCC compiler on HP-UX/PA-RISC
 	affect HP-UX for Itanium or GCC for HP-UX/PA-RISC.  Code compiled
 	with aCC can still be debugged on an assembly level.
 
+MIPS ".pdr" sections
+
+	A MIPS-specific format used to describe stack frame layout
+	in debugging information.
+
+Scheme support
+
+	GDB could work with an older version of Guile to debug
+	the interpreter and Scheme programs running in it.
+
 *** Changes in GDB 6.6
 
 * New targets
diff --git a/gdb/README b/gdb/README
index 1857d17..9c64425 100644
--- a/gdb/README
+++ b/gdb/README
@@ -457,9 +457,6 @@ Linux.
    There are a number of remote interfaces for talking to existing ROM
 monitors and other hardware:
 
-	remote-e7000.c	 Renesas E7000 ICE
-	remote-est.c	 EST emulator
-	remote-hms.c	 Renesas Micro Systems H8/300 monitor
 	remote-mips.c	 MIPS remote debugging protocol
 	remote-sds.c	 PowerPC SDS monitor
 	remote-sim.c	 Generalized simulator protocol
diff --git a/gdb/config/h8300/h8300.mt b/gdb/config/h8300/h8300.mt
index ea78140..9e579be 100644
--- a/gdb/config/h8300/h8300.mt
+++ b/gdb/config/h8300/h8300.mt
@@ -1,5 +1,5 @@
-# Target: H8300 with HMS monitor, E7000 ICE and H8 simulator
-TDEPFILES= h8300-tdep.o remote-e7000.o ser-e7kpc.o monitor.o remote-hms.o dsrec.o
+# Target: H8300 with HMS monitor and H8 simulator
+TDEPFILES= h8300-tdep.o monitor.o dsrec.o
 
 SIM_OBS = remote-sim.o
 SIM = ../sim/h8300/libsim.a
diff --git a/gdb/config/mips/embed.mt b/gdb/config/mips/embed.mt
index 4265a91..fb2a45b 100644
--- a/gdb/config/mips/embed.mt
+++ b/gdb/config/mips/embed.mt
@@ -1,3 +1,3 @@
-TDEPFILES= mips-tdep.o mips-mdebug-tdep.o
+TDEPFILES= mips-tdep.o
 SIM_OBS = remote-sim.o
 SIM = ../sim/mips/libsim.a
diff --git a/gdb/config/powerpc/ppc-eabi.mt b/gdb/config/powerpc/ppc-eabi.mt
index 02a560a..25f8cba 100644
--- a/gdb/config/powerpc/ppc-eabi.mt
+++ b/gdb/config/powerpc/ppc-eabi.mt
@@ -1,3 +1,3 @@
 # Target: PowerPC running eabi
-TDEPFILES= rs6000-tdep.o monitor.o dsrec.o ppcbug-rom.o dink32-rom.o ocd.o ppc-sysv-tdep.o solib.o solib-svr4.o
+TDEPFILES= rs6000-tdep.o monitor.o dsrec.o ppcbug-rom.o dink32-rom.o ppc-sysv-tdep.o solib.o solib-svr4.o
 DEPRECATED_TM_FILE= tm-ppc-eabi.h
diff --git a/gdb/config/powerpc/ppc-sim.mt b/gdb/config/powerpc/ppc-sim.mt
index 2d14a2d..e78a64d 100644
--- a/gdb/config/powerpc/ppc-sim.mt
+++ b/gdb/config/powerpc/ppc-sim.mt
@@ -1,5 +1,5 @@
 # Target: PowerPC running eabi and including the simulator
-TDEPFILES= rs6000-tdep.o monitor.o dsrec.o ppcbug-rom.o dink32-rom.o ocd.o ppc-sysv-tdep.o solib.o solib-svr4.o
+TDEPFILES= rs6000-tdep.o monitor.o dsrec.o ppcbug-rom.o dink32-rom.o ppc-sysv-tdep.o solib.o solib-svr4.o
 DEPRECATED_TM_FILE= tm-ppc-eabi.h
 
 SIM_OBS = remote-sim.o
diff --git a/gdb/config/sh/embed.mt b/gdb/config/sh/embed.mt
index 8aaf408..68acb27 100644
--- a/gdb/config/sh/embed.mt
+++ b/gdb/config/sh/embed.mt
@@ -1,5 +1,5 @@
 # Target: Embedded Renesas Super-H with ICE and simulator
-TDEPFILES= sh-tdep.o sh64-tdep.o monitor.o sh3-rom.o remote-e7000.o ser-e7kpc.o dsrec.o 
+TDEPFILES= sh-tdep.o sh64-tdep.o monitor.o dsrec.o 
 
 SIM_OBS = remote-sim.o
 SIM = ../sim/sh/libsim.a
diff --git a/gdb/config/sh/linux.mt b/gdb/config/sh/linux.mt
index c9a22ee..a04e7fa 100644
--- a/gdb/config/sh/linux.mt
+++ b/gdb/config/sh/linux.mt
@@ -1,6 +1,6 @@
 # Target: GNU/Linux Super-H
 TDEPFILES= sh-tdep.o sh64-tdep.o sh-linux-tdep.o \
-	monitor.o sh3-rom.o remote-e7000.o ser-e7kpc.o dsrec.o \
+	monitor.o dsrec.o \
 	solib.o solib-svr4.o symfile-mem.o
 
 SIM_OBS = remote-sim.o
diff --git a/gdb/defs.h b/gdb/defs.h
index 7debbd6..8e95014 100644
--- a/gdb/defs.h
+++ b/gdb/defs.h
@@ -210,7 +210,6 @@ enum language
     language_fortran,		/* Fortran */
     language_m2,		/* Modula-2 */
     language_asm,		/* Assembly language */
-    language_scm,    		/* Scheme / Guile */
     language_pascal,		/* Pascal */
     language_ada,		/* Ada */
     language_minimal,		/* All other languages, minimal support only */
diff --git a/gdb/doc/ChangeLog b/gdb/doc/ChangeLog
index 4ce41e3..c6b8d8c 100644
--- a/gdb/doc/ChangeLog
+++ b/gdb/doc/ChangeLog
@@ -1,3 +1,14 @@
+2007-04-13  Daniel Jacobowitz  <dan@codesourcery.com>
+
+	* gdb.texinfo (Memory): Reference Remote Debugging chapter.
+	(Character Sets, Caching Data of Remote Targets): Likewise.
+	(Targets): Delete Remote node.  Move its text...
+	(Debugging Remote Programs): ...to here.  Delete description
+	of the "remote" command.
+	(Remote configuration): Delete description of "set remotedevice"
+	and "show remotedevice".
+	(Embedded Processors): Delete H8/300, H8/500, and SH nodes.
+
 2007-04-11  Bob Wilson  <bob.wilson@acm.org>
 
         * gdb.texinfo (Contributors, Continuing and Stepping)
diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo
index d51066a..4be576b 100644
--- a/gdb/doc/gdb.texinfo
+++ b/gdb/doc/gdb.texinfo
@@ -5890,7 +5890,7 @@ address printed if several units were printed on the last line of output.
 @cindex remote memory comparison
 @cindex verify remote memory image
 When you are debugging a program running on a remote target machine
-(@pxref{Remote}), you may wish to verify the program's image in the
+(@pxref{Remote Debugging}), you may wish to verify the program's image in the
 remote machine's memory against the executable file you downloaded to
 the target.  The @code{compare-sections} command is provided for such
 situations.
@@ -7078,7 +7078,7 @@ character set}; the one the inferior program uses we call the
 
 For example, if you are running @value{GDBN} on a @sc{gnu}/Linux system, which
 uses the ISO Latin 1 character set, but you are using @value{GDBN}'s
-remote protocol (@pxref{Remote, ,Remote Debugging}) to debug a program
+remote protocol (@pxref{Remote Debugging}) to debug a program
 running on an IBM mainframe, which uses the @sc{ebcdic} character set,
 then the host character set is Latin-1, and the target character set is
 @sc{ebcdic}.  If you give @value{GDBN} the command @code{set
@@ -7310,7 +7310,7 @@ character.
 @cindex caching data of remote targets
 
 @value{GDBN} can cache data exchanged between the debugger and a
-remote target (@pxref{Remote}).  Such caching generally improves
+remote target (@pxref{Remote Debugging}).  Such caching generally improves
 performance, because it reduces the overhead of the remote protocol by
 bundling memory reads and writes into large chunks.  Unfortunately,
 @value{GDBN} does not currently know anything about volatile
@@ -12191,8 +12191,6 @@ and @code{show architecture}.
 * Active Targets::              Active targets
 * Target Commands::             Commands for managing targets
 * Byte Order::                  Choosing target byte order
-* Remote::                      Remote debugging
-
 @end menu
 
 @node Active Targets
@@ -12437,8 +12435,9 @@ Note that these commands merely adjust interpretation of symbolic
 data on the host, and that they have absolutely no effect on the
 target system.
 
-@node Remote
-@section Remote Debugging
+
+@node Remote Debugging
+@chapter Debugging Remote Programs
 @cindex remote debugging
 
 If you are trying to debug a program running on a machine that cannot run
@@ -12457,20 +12456,6 @@ communicate with @value{GDBN}.
 Other remote targets may be available in your
 configuration of @value{GDBN}; use @code{help target} to list them.
 
-Once you've connected to the remote target, @value{GDBN} allows you to
-send arbitrary commands to the remote monitor:
-
-@table @code
-@item remote @var{command}
-@kindex remote@r{, a command}
-@cindex send command to remote monitor
-Send an arbitrary @var{command} string to the remote monitor.
-@end table
-
-
-@node Remote Debugging
-@chapter Debugging Remote Programs
-
 @menu
 * Connecting::                  Connecting to a remote target
 * Server::	                Using the gdbserver program
@@ -12807,19 +12792,6 @@ expect to see @samp{Ctrl-C} as the interrupt signal.
 Show whether @value{GDBN} sends @code{BREAK} or @samp{Ctrl-C} to
 interrupt the remote program.
 
-@item set remotedevice @var{device}
-@cindex serial port name
-Set the name of the serial port through which to communicate to the
-remote target to @var{device}.  This is the device used by
-@value{GDBN} to open the serial communications line to the remote
-target.  There's no default, so you must set a valid port name for the
-remote serial communications to work.  (Some varieties of the
-@code{target} command accept the port name as part of their
-arguments.)
-
-@item show remotedevice
-Show the current name of the serial port.
-
 @item set remotelogbase @var{base}
 Set the base (a.k.a.@: radix) of logging serial protocol
 communications to @var{base}.  Supported values of @var{base} are:
@@ -14259,15 +14231,12 @@ acceptable commands.
 
 @menu
 * ARM::                         ARM RDI
-* H8/300::                      Renesas H8/300
-* H8/500::                      Renesas H8/500
 * M32R/D::                      Renesas M32R/D
 * M68K::                        Motorola M68K
 * MIPS Embedded::               MIPS Embedded
 * OpenRISC 1000::               OpenRisc 1000
 * PA::                          HP PA Embedded
 * PowerPC::                     PowerPC
-* SH::                          Renesas SH
 * Sparclet::                    Tsqware Sparclet
 * Sparclite::                   Fujitsu Sparclite
 * Z8000::                       Zilog Z8000
@@ -14392,264 +14361,6 @@ Show the setting of RDI heartbeat packets.
 @end table
 
 
-@node H8/300
-@subsection Renesas H8/300
-
-@table @code
-
-@kindex target hms@r{, with H8/300}
-@item target hms @var{dev}
-A Renesas SH, H8/300, or H8/500 board, attached via serial line to your host.
-Use special commands @code{device} and @code{speed} to control the serial
-line and the communications speed used.
-
-@kindex target e7000@r{, with H8/300}
-@item target e7000 @var{dev}
-E7000 emulator for Renesas H8 and SH.
-
-@kindex target sh3@r{, with H8/300}
-@kindex target sh3e@r{, with H8/300}
-@item target sh3 @var{dev}
-@itemx target sh3e @var{dev}
-Renesas SH-3 and SH-3E target systems.
-
-@end table
-
-@cindex download to H8/300 or H8/500
-@cindex H8/300 or H8/500 download
-@cindex download to Renesas SH
-@cindex Renesas SH download
-When you select remote debugging to a Renesas SH, H8/300, or H8/500
-board, the @code{load} command downloads your program to the Renesas
-board and also opens it as the current executable target for
-@value{GDBN} on your host (like the @code{file} command).
-
-@value{GDBN} needs to know these things to talk to your
-Renesas SH, H8/300, or H8/500:
-
-@enumerate
-@item
-that you want to use @samp{target hms}, the remote debugging interface
-for Renesas microprocessors, or @samp{target e7000}, the in-circuit
-emulator for the Renesas SH and the Renesas 300H.  (@samp{target hms} is
-the default when @value{GDBN} is configured specifically for the Renesas SH,
-H8/300, or H8/500.)
-
-@item
-what serial device connects your host to your Renesas board (the first
-serial device available on your host is the default).
-
-@item
-what speed to use over the serial device.
-@end enumerate
-
-@menu
-* Renesas Boards::      Connecting to Renesas boards.
-* Renesas ICE::         Using the E7000 In-Circuit Emulator.
-* Renesas Special::     Special @value{GDBN} commands for Renesas micros.
-@end menu
-
-@node Renesas Boards
-@subsubsection Connecting to Renesas Boards
-
-@c only for Unix hosts
-@kindex device
-@cindex serial device, Renesas micros
-Use the special @code{@value{GDBN}} command @samp{device @var{port}} if you
-need to explicitly set the serial device.  The default @var{port} is the
-first available port on your host.  This is only necessary on Unix
-hosts, where it is typically something like @file{/dev/ttya}.
-
-@kindex speed
-@cindex serial line speed, Renesas micros
-@code{@value{GDBN}} has another special command to set the communications
-speed: @samp{speed @var{bps}}.  This command also is only used from Unix
-hosts; on DOS hosts, set the line speed as usual from outside @value{GDBN} with
-the DOS @code{mode} command (for instance,
-@w{@kbd{mode com2:9600,n,8,1,p}} for a 9600@dmn{bps} connection).
-
-The @samp{device} and @samp{speed} commands are available only when you
-use a Unix host to debug your Renesas microprocessor programs.  If you
-use a DOS host,
-@value{GDBN} depends on an auxiliary terminate-and-stay-resident program
-called @code{asynctsr} to communicate with the development board
-through a PC serial port.  You must also use the DOS @code{mode} command
-to set up the serial port on the DOS side.
-
-The following sample session illustrates the steps needed to start a
-program under @value{GDBN} control on an H8/300.  The example uses a
-sample H8/300 program called @file{t.x}.  The procedure is the same for
-the Renesas SH and the H8/500.
-
-First hook up your development board.  In this example, we use a
-board attached to serial port @code{COM2}; if you use a different serial
-port, substitute its name in the argument of the @code{mode} command.
-When you call @code{asynctsr}, the auxiliary comms program used by the
-debugger, you give it just the numeric part of the serial port's name;
-for example, @samp{asyncstr 2} below runs @code{asyncstr} on
-@code{COM2}.
-
-@smallexample
-C:\H8300\TEST> asynctsr 2
-C:\H8300\TEST> mode com2:9600,n,8,1,p
-
-Resident portion of MODE loaded
-
-COM2: 9600, n, 8, 1, p
-
-@end smallexample
-
-@quotation
-@emph{Warning:} We have noticed a bug in PC-NFS that conflicts with
-@code{asynctsr}.  If you also run PC-NFS on your DOS host, you may need to
-disable it, or even boot without it, to use @code{asynctsr} to control
-your development board.
-@end quotation
-
-@kindex target hms@r{, and serial protocol}
-Now that serial communications are set up, and the development board is
-connected, you can start up @value{GDBN}.  Call @code{@value{GDBN}} with
-the name of your program as the argument.  @code{@value{GDBN}} prompts
-you, as usual, with the prompt @samp{(@value{GDBP})}.  Use two special
-commands to begin your debugging session: @samp{target hms} to specify
-cross-debugging to the Renesas board, and the @code{load} command to
-download your program to the board.  @code{load} displays the names of
-the program's sections, and a @samp{*} for each 2K of data downloaded.
-(If you want to refresh @value{GDBN} data on symbols or on the
-executable file without downloading, use the @value{GDBN} commands
-@code{file} or @code{symbol-file}.  These commands, and @code{load}
-itself, are described in @ref{Files,,Commands to Specify Files}.)
-
-@smallexample
-(eg-C:\H8300\TEST) @value{GDBP} t.x
-@value{GDBN} is free software and you are welcome to distribute copies
- of it under certain conditions; type "show copying" to see
- the conditions.
-There is absolutely no warranty for @value{GDBN}; type "show warranty"
-for details.
-@value{GDBN} @value{GDBVN}, Copyright 1992 Free Software Foundation, Inc...
-(@value{GDBP}) target hms
-Connected to remote H8/300 HMS system.
-(@value{GDBP}) load t.x
-.text   : 0x8000 .. 0xabde ***********
-.data   : 0xabde .. 0xad30 *
-.stack  : 0xf000 .. 0xf014 *
-@end smallexample
-
-At this point, you're ready to run or debug your program.  From here on,
-you can use all the usual @value{GDBN} commands.  The @code{break} command
-sets breakpoints; the @code{run} command starts your program;
-@code{print} or @code{x} display data; the @code{continue} command
-resumes execution after stopping at a breakpoint.  You can use the
-@code{help} command at any time to find out more about @value{GDBN} commands.
-
-Remember, however, that @emph{operating system} facilities aren't
-available on your development board; for example, if your program hangs,
-you can't send an interrupt---but you can press the @sc{reset} switch!
-
-Use the @sc{reset} button on the development board
-@itemize @bullet
-@item
-to interrupt your program (don't use @kbd{Ctrl-c} on the DOS host---it has
-no way to pass an interrupt signal to the development board); and
-
-@item
-to return to the @value{GDBN} command prompt after your program finishes
-normally.  The communications protocol provides no other way for @value{GDBN}
-to detect program completion.
-@end itemize
-
-In either case, @value{GDBN} sees the effect of a @sc{reset} on the
-development board as a ``normal exit'' of your program.
-
-@node Renesas ICE
-@subsubsection Using the E7000 In-circuit Emulator
-
-@kindex target e7000@r{, with Renesas ICE}
-You can use the E7000 in-circuit emulator to develop code for either the
-Renesas SH or the H8/300H.  Use one of these forms of the @samp{target
-e7000} command to connect @value{GDBN} to your E7000:
-
-@table @code
-@item target e7000 @var{port} @var{speed}
-Use this form if your E7000 is connected to a serial port.  The
-@var{port} argument identifies what serial port to use (for example,
-@samp{com2}).  The third argument is the line speed in bits per second
-(for example, @samp{9600}).
-
-@item target e7000 @var{hostname}
-If your E7000 is installed as a host on a TCP/IP network, you can just
-specify its hostname; @value{GDBN} uses @code{telnet} to connect.
-@end table
-
-The following special commands are available when debugging with the
-Renesas E7000 ICE:
-
-@table @code
-@item e7000 @var{command}
-@kindex e7000
-@cindex send command to E7000 monitor
-This sends the specified @var{command} to the E7000 monitor.
-
-@item ftplogin @var{machine} @var{username} @var{password} @var{dir}
-@kindex ftplogin@r{, E7000}
-This command records information for subsequent interface with the
-E7000 monitor via the FTP protocol: @value{GDBN} will log into the
-named @var{machine} using specified @var{username} and @var{password},
-and then chdir to the named directory @var{dir}.
-
-@item ftpload @var{file}
-@kindex ftpload@r{, E7000}
-This command uses credentials recorded by @code{ftplogin} to fetch and
-load the named @var{file} from the E7000 monitor.
-
-@item drain
-@kindex drain@r{, E7000}
-This command drains any pending text buffers stored on the E7000.
-
-@item set usehardbreakpoints
-@itemx show usehardbreakpoints
-@kindex set usehardbreakpoints@r{, E7000}
-@kindex show usehardbreakpoints@r{, E7000}
-@cindex hardware breakpoints, and E7000
-These commands set and show the use of hardware breakpoints for all
-breakpoints.  @xref{Set Breaks, hardware-assisted breakpoint}, for
-more information about using hardware breakpoints selectively.
-@end table
-
-@node Renesas Special
-@subsubsection Special @value{GDBN} Commands for Renesas Micros
-
-Some @value{GDBN} commands are available only for the H8/300:
-
-@table @code
-
-@kindex set machine
-@kindex show machine
-@item set machine h8300
-@itemx set machine h8300h
-Condition @value{GDBN} for one of the two variants of the H8/300
-architecture with @samp{set machine}.  You can use @samp{show machine}
-to check which variant is currently in effect.
-
-@end table
-
-@node H8/500
-@subsection H8/500
-
-@table @code
-
-@kindex set memory @var{mod}
-@cindex memory models, H8/500
-@item set memory @var{mod}
-@itemx show memory
-Specify which H8/500 memory model (@var{mod}) you are using with
-@samp{set memory}; check which memory model is in effect with @samp{show
-memory}.  The accepted values for @var{mod} are @code{small},
-@code{big}, @code{medium}, and @code{compact}.
-
-@end table
-
 @node M32R/D
 @subsection Renesas M32R/D and M32R/SDI
 
@@ -15088,29 +14799,6 @@ W89K monitor, running on a Winbond HPPA board.
 
 @end table
 
-@node SH
-@subsection Renesas SH
-
-@table @code
-
-@kindex target hms@r{, with Renesas SH}
-@item target hms @var{dev}
-A Renesas SH board attached via serial line to your host.  Use special
-commands @code{device} and @code{speed} to control the serial line and
-the communications speed used.
-
-@kindex target e7000@r{, with Renesas SH}
-@item target e7000 @var{dev}
-E7000 emulator for Renesas SH.
-
-@kindex target sh3@r{, with SH}
-@kindex target sh3e@r{, with SH}
-@item target sh3 @var{dev}
-@item target sh3e @var{dev}
-Renesas SH-3 and SH-3E target systems.
-
-@end table
-
 @node Sparclet
 @subsection Tsqware Sparclet
 
diff --git a/gdb/expprint.c b/gdb/expprint.c
index 7191ee3..dc1f7f7 100644
--- a/gdb/expprint.c
+++ b/gdb/expprint.c
@@ -166,7 +166,6 @@ print_subexp_standard (struct expression *exp, int *pos,
       return;
 
     case OP_NAME:
-    case OP_EXPRSTRING:
       nargs = longest_to_int (exp->elts[pc + 1].longconst);
       (*pos) += 3 + BYTES_TO_EXP_ELEM (nargs + 1);
       fputs_filtered (&exp->elts[pc + 2].string, stream);
@@ -1075,7 +1074,6 @@ dump_subexp_body_standard (struct expression *exp,
     case OP_THIS:
     case OP_LABELED:
     case OP_NAME:
-    case OP_EXPRSTRING:
       fprintf_filtered (stream, "Unknown format");
     }
 
diff --git a/gdb/expression.h b/gdb/expression.h
index 8005f3e..fecf69f 100644
--- a/gdb/expression.h
+++ b/gdb/expression.h
@@ -325,9 +325,6 @@ enum exp_opcode
     /* An un-looked-up identifier. */
     OP_NAME,
 
-    /* An unparsed expression.  Used for Scheme (for now at least) */
-    OP_EXPRSTRING,
-
     /* An Objective C Foundation Class NSString constant */
     OP_OBJC_NSSTRING,
 
diff --git a/gdb/parse.c b/gdb/parse.c
index 6ba5a45..af3ef72 100644
--- a/gdb/parse.c
+++ b/gdb/parse.c
@@ -959,7 +959,6 @@ operator_length_standard (struct expression *expr, int endpos,
     case OP_OBJC_NSSTRING:	/* Objective C Foundation Class NSString constant */
     case OP_OBJC_SELECTOR:	/* Objective C "@selector" pseudo-op */
     case OP_NAME:
-    case OP_EXPRSTRING:
       oplen = longest_to_int (expr->elts[endpos - 2].longconst);
       oplen = 4 + BYTES_TO_EXP_ELEM (oplen + 1);
       break;
diff --git a/gdb/remote-mips.c b/gdb/remote-mips.c
index ffe0f1c..8089c01 100644
--- a/gdb/remote-mips.c
+++ b/gdb/remote-mips.c
@@ -32,7 +32,6 @@
 #include "serial.h"
 #include "target.h"
 #include "exceptions.h"
-#include "remote-utils.h"
 #include "gdb_string.h"
 #include "gdb_stat.h"
 #include "regcache.h"
diff --git a/gdb/remote-sim.c b/gdb/remote-sim.c
index 4ec63d5..f9fee8b 100644
--- a/gdb/remote-sim.c
+++ b/gdb/remote-sim.c
@@ -37,7 +37,6 @@
 #include "gdbcore.h"
 #include "gdb/callback.h"
 #include "gdb/remote-sim.h"
-#include "remote-utils.h"
 #include "command.h"
 #include "regcache.h"
 #include "gdb_assert.h"
@@ -329,7 +328,7 @@ gdbsim_fetch_register (int regno)
 	/* Else if (nr_bytes < 0): an old simulator, that doesn't
 	   think to return the register size.  Just assume all is ok.  */
 	regcache_raw_supply (current_regcache, regno, buf);
-	if (sr_get_debug ())
+	if (remote_debug)
 	  {
 	    printf_filtered ("gdbsim_fetch_register: %d", regno);
 	    /* FIXME: We could print something more intelligible.  */
@@ -364,7 +363,7 @@ gdbsim_store_register (int regno)
       /* FIXME: cagney/2002-05-27: Should check `nr_bytes == 0'
 	 indicating that GDB and the SIM have different ideas about
 	 which registers are fetchable.  */
-      if (sr_get_debug ())
+      if (remote_debug)
 	{
 	  printf_filtered ("gdbsim_store_register: %d", regno);
 	  /* FIXME: We could print something more intelligible.  */
@@ -379,7 +378,7 @@ gdbsim_store_register (int regno)
 static void
 gdbsim_kill (void)
 {
-  if (sr_get_debug ())
+  if (remote_debug)
     printf_filtered ("gdbsim_kill\n");
 
   /* There is no need to `kill' running simulator - the simulator is
@@ -407,7 +406,7 @@ gdbsim_load (char *args, int fromtty)
   if (argv[1] != NULL)
     error (_("GDB sim does not yet support a load offset."));
 
-  if (sr_get_debug ())
+  if (remote_debug)
     printf_filtered ("gdbsim_load: prog \"%s\"\n", prog);
 
   /* FIXME: We will print two messages on error.
@@ -442,7 +441,7 @@ gdbsim_create_inferior (char *exec_file, char *args, char **env, int from_tty)
   if (!program_loaded)
     warning (_("No program loaded."));
 
-  if (sr_get_debug ())
+  if (remote_debug)
     printf_filtered ("gdbsim_create_inferior: exec_file \"%s\", args \"%s\"\n",
 		     (exec_file ? exec_file : "(NULL)"),
 		     args);
@@ -485,7 +484,7 @@ gdbsim_open (char *args, int from_tty)
   char *arg_buf;
   char **argv;
 
-  if (sr_get_debug ())
+  if (remote_debug)
     printf_filtered ("gdbsim_open: args \"%s\"\n", args ? args : "(null)");
 
   /* Remove current simulator if one exists.  Only do this if the simulator
@@ -562,7 +561,7 @@ gdbsim_open (char *args, int from_tty)
 static void
 gdbsim_close (int quitting)
 {
-  if (sr_get_debug ())
+  if (remote_debug)
     printf_filtered ("gdbsim_close: quitting %d\n", quitting);
 
   program_loaded = 0;
@@ -589,7 +588,7 @@ gdbsim_close (int quitting)
 static void
 gdbsim_detach (char *args, int from_tty)
 {
-  if (sr_get_debug ())
+  if (remote_debug)
     printf_filtered ("gdbsim_detach: args \"%s\"\n", args);
 
   pop_target ();		/* calls gdbsim_close to do the real work */
@@ -610,7 +609,7 @@ gdbsim_resume (ptid_t ptid, int step, enum target_signal siggnal)
   if (PIDGET (inferior_ptid) != 42)
     error (_("The program is not being run."));
 
-  if (sr_get_debug ())
+  if (remote_debug)
     printf_filtered ("gdbsim_resume: step %d, signal %d\n", step, siggnal);
 
   resume_siggnal = siggnal;
@@ -673,7 +672,7 @@ gdbsim_wait (ptid_t ptid, struct target_waitstatus *status)
   int sigrc = 0;
   enum sim_stop reason = sim_running;
 
-  if (sr_get_debug ())
+  if (remote_debug)
     printf_filtered ("gdbsim_wait\n");
 
 #if defined (HAVE_SIGACTION) && defined (SA_RESTART)
@@ -759,14 +758,14 @@ gdbsim_xfer_inferior_memory (CORE_ADDR memaddr, gdb_byte *myaddr, int len,
   if (!program_loaded)
     error (_("No program loaded."));
 
-  if (sr_get_debug ())
+  if (remote_debug)
     {
       /* FIXME: Send to something other than STDOUT? */
       printf_filtered ("gdbsim_xfer_inferior_memory: myaddr 0x");
       gdb_print_host_address (myaddr, gdb_stdout);
       printf_filtered (", memaddr 0x%s, len %d, write %d\n",
 		       paddr_nz (memaddr), len, write);
-      if (sr_get_debug () && write)
+      if (remote_debug && write)
 	dump_mem (myaddr, len);
     }
 
@@ -777,7 +776,7 @@ gdbsim_xfer_inferior_memory (CORE_ADDR memaddr, gdb_byte *myaddr, int len,
   else
     {
       len = sim_read (gdbsim_desc, memaddr, myaddr, len);
-      if (sr_get_debug () && len > 0)
+      if (remote_debug && len > 0)
 	dump_mem (myaddr, len);
     }
   return len;
@@ -791,7 +790,7 @@ gdbsim_files_info (struct target_ops *target)
   if (exec_bfd)
     file = bfd_get_filename (exec_bfd);
 
-  if (sr_get_debug ())
+  if (remote_debug)
     printf_filtered ("gdbsim_files_info: file \"%s\"\n", file);
 
   if (exec_bfd)
@@ -807,7 +806,7 @@ gdbsim_files_info (struct target_ops *target)
 static void
 gdbsim_mourn_inferior (void)
 {
-  if (sr_get_debug ())
+  if (remote_debug)
     printf_filtered ("gdbsim_mourn_inferior:\n");
 
   remove_breakpoints ();
diff --git a/gdb/value.c b/gdb/value.c
index ffb70fb..4ff088c 100644
--- a/gdb/value.c
+++ b/gdb/value.c
@@ -31,7 +31,6 @@
 #include "gdbcmd.h"
 #include "target.h"
 #include "language.h"
-#include "scm-lang.h"
 #include "demangle.h"
 #include "doublest.h"
 #include "gdb_assert.h"
@@ -1076,10 +1075,6 @@ unpack_long (struct type *type, const gdb_byte *valaddr)
   int len = TYPE_LENGTH (type);
   int nosign = TYPE_UNSIGNED (type);
 
-  if (current_language->la_language == language_scm
-      && is_scmvalue_type (type))
-    return scm_unpack (type, valaddr, TYPE_CODE_INT);
-
   switch (code)
     {
     case TYPE_CODE_TYPEDEF: