* main.c: Move entire file except for #ifndef MAIN_OVERRIDE code

	to new file top.c.  Make things extern instead of static and
	similar rearrangements to deal with this.
	* top.h: New file.
	* utils.c: Move fputs_unfiltered to main.c.  Remove
	FPUTS_UNFILTERED_OVERRIDE ifndef.
	* Makefile.in: Change so that gdb uses main.c, utils.c, and top.c,
	and libgdb uses utils.c and top.c.

5 files changed, 2566 insertions, 15 deletions

diff --git a/gdb/.Sanitize b/gdb/.Sanitize
index 7475b5e..d72f5bd 100644
--- a/gdb/.Sanitize
+++ b/gdb/.Sanitize
@@ -293,6 +293,8 @@ terminal.h
 testsuite
 thread.c
 thread.h
+top.c
+top.h
 typeprint.c
 typeprint.h
 ultra3-nat.c
diff --git a/gdb/ChangeLog b/gdb/ChangeLog
index e1ca801..4762c0e 100644
--- a/gdb/ChangeLog
+++ b/gdb/ChangeLog
@@ -1,3 +1,14 @@
+Fri Jun  3 09:15:00 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* main.c: Move entire file except for #ifndef MAIN_OVERRIDE code
+	to new file top.c.  Make things extern instead of static and
+	similar rearrangements to deal with this.
+	* top.h: New file.
+	* utils.c: Move fputs_unfiltered to main.c.  Remove 
+	FPUTS_UNFILTERED_OVERRIDE ifndef.
+	* Makefile.in: Change so that gdb uses main.c, utils.c, and top.c,
+	and libgdb uses utils.c and top.c.
+
 Thu Jun  2 23:19:10 1994  Jeff Law  (law@snake.cs.utah.edu)
 
 	* hppa-tdep.c (skip_trampoline_code): Fix typo.
diff --git a/gdb/Makefile.in b/gdb/Makefile.in
index 84eb85a..146d2f3 100644
--- a/gdb/Makefile.in
+++ b/gdb/Makefile.in
@@ -304,7 +304,8 @@ SFILES = blockframe.c breakpoint.c buildsym.c c-exp.y c-lang.c \
 	m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c main.c maint.c \
 	mem-break.c minsyms.c mipsread.c nlmread.c objfiles.c parse.c \
 	printcmd.c remote.c source.c stabsread.c stack.c symfile.c symmisc.c \
-	symtab.c target.c thread.c typeprint.c utils.c valarith.c valops.c \
+	symtab.c target.c thread.c top.c \
+	typeprint.c utils.c valarith.c valops.c \
 	valprint.c values.c serial.c ser-unix.c mdebugread.c os9kread.c
 
 # Files that are not source code, but need to go into
@@ -398,7 +399,7 @@ HFILES_NO_SRCDIR = buildsym.h call-cmds.h coff-solib.h defs.h dst.h environ.h \
 	vx-share/dbgRpcLib.h vx-share/ptrace.h vx-share/vxTypes.h \
 	vx-share/vxWorks.h vx-share/wait.h vx-share/xdr_ld.h \
 	vx-share/xdr_ptrace.h vx-share/xdr_rdb.h thread.h \
-	dcache.h remote-utils.h remote-sim.h
+	dcache.h remote-utils.h remote-sim.h top.h
 
 # Header files that already have srcdir in them, or which are in objdir.
 
@@ -445,11 +446,11 @@ COMMON_OBS = version.o blockframe.o breakpoint.o findvar.o stack.o thread.o \
 	dwarfread.o mipsread.o stabsread.o core.o c-lang.o ch-lang.o m2-lang.o \
 	complaints.o typeprint.o c-typeprint.o ch-typeprint.o m2-typeprint.o \
 	c-valprint.o cp-valprint.o ch-valprint.o m2-valprint.o nlmread.o \
-	serial.o mdebugread.o os9kread.o
+	serial.o mdebugread.o os9kread.o top.o utils.o
 
-OBS = $(COMMON_OBS) main.o utils.o annotate.o
+OBS = $(COMMON_OBS) main.o annotate.o
 
-LIBGDB_OBS = libmain.o libutils.o
+LIBGDB_OBS = 
 
 TSOBS = inflow.o
 
@@ -568,14 +569,6 @@ libgdb-files: $(LIBGDBDEPS) Makefile.in
 		echo $$i >> libgdb-files;\
 	done
 
-libmain.o: main.c
-	$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/main.c -DMAIN_OVERRIDE \
-	  -o libmain.o
-
-libutils.o: utils.c
-	$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/utils.c  -o libutils.o \
-	  -DFPUTS_UNFILTERED_OVERRIDE
-
 saber_gdb: $(SFILES) $(DEPFILES) copying.c version.c
 	#setopt load_flags $(CFLAGS) $(BFD_CFLAGS) -DHOST_SYS=SUN4_SYS
 	#load ./init.c $(SFILES)
@@ -1290,10 +1283,12 @@ m88k-nat.o: m88k-nat.c $(defs_h) $(gdbcore_h) $(inferior_h)
 m88k-pinsn.o: m88k-pinsn.c $(defs_h) $(symtab_h) 
 m88k-tdep.o: m88k-tdep.c $(defs_h) $(gdbcore_h) $(inferior_h)
 
-main.o: main.c $(bfd_h) $(getopt_h) $(readline_headers) call-cmds.h \
+top.o: top.c top.h $(bfd_h) $(getopt_h) $(readline_headers) call-cmds.h \
 	$(defs_h) $(gdbcmd_h) $(inferior_h) language.h signals.h \
 	$(remote_utils_h)
-	$(CC) -c $(INTERNAL_CFLAGS) $(READLINE_CFLAGS) $(srcdir)/main.c
+	$(CC) -c $(INTERNAL_CFLAGS) $(READLINE_CFLAGS) $(srcdir)/top.c
+
+main.o: main.c top.h $(defs_h)
 
 maint.o: maint.c $(defs_h) $(gdbcmd_h) $(gdbtypes_h) $(symtab_h) language.h \
 	$(expression_h)
diff --git a/gdb/top.c b/gdb/top.c
new file mode 100644
index 0000000..29c2292
--- /dev/null
+++ b/gdb/top.c
@@ -0,0 +1,2495 @@
+/* Top level stuff for GDB, the GNU debugger.
+   Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+#include "defs.h"
+#include "gdbcmd.h"
+#include "call-cmds.h"
+#include "symtab.h"
+#include "inferior.h"
+#include "signals.h"
+#include "target.h"
+#include "breakpoint.h"
+#include "gdbtypes.h"
+#include "expression.h"
+#include "language.h"
+#include "terminal.h" /* For job_control.  */
+#include "annotate.h"
+#include <setjmp.h>
+#include "top.h"
+
+/* readline include files */
+#include "readline.h"
+#include "history.h"
+
+/* readline defines this.  */
+#undef savestring
+
+#include <sys/types.h>
+#ifdef USG
+/* What is this for?  X_OK?  */
+#include <unistd.h>
+#endif
+
+#include <string.h>
+#ifndef	NO_SYS_FILE
+#include <sys/file.h>
+#endif
+#include <sys/param.h>
+#include <sys/stat.h>
+#include <ctype.h>
+
+/* Prototypes for local functions */
+
+static char *
+symbol_completion_function PARAMS ((char *, int));
+
+static void
+command_loop_marker PARAMS ((int));
+
+static void
+init_main PARAMS ((void));
+
+static void
+init_cmd_lists PARAMS ((void));
+
+static void
+float_handler PARAMS ((int));
+
+static void
+init_signals PARAMS ((void));
+
+static void 
+set_verbose PARAMS ((char *, int, struct cmd_list_element *));
+
+static void
+show_history PARAMS ((char *, int));
+
+static void
+set_history PARAMS ((char *, int));
+
+static void
+set_history_size_command PARAMS ((char *, int, struct cmd_list_element *));
+
+static void
+show_commands PARAMS ((char *, int));
+
+static void
+echo_command PARAMS ((char *, int));
+
+static void
+pwd_command PARAMS ((char *, int));
+
+static void
+show_version PARAMS ((char *, int));
+
+static void
+document_command PARAMS ((char *, int));
+
+static void
+define_command PARAMS ((char *, int));
+
+static void
+validate_comname PARAMS ((char *));
+
+static void
+help_command PARAMS ((char *, int));
+
+static void
+show_command PARAMS ((char *, int));
+
+static void
+info_command PARAMS ((char *, int));
+
+static void
+complete_command PARAMS ((char *, int));
+
+static void
+do_nothing PARAMS ((int));
+
+static int
+quit_cover PARAMS ((char *));
+
+static void
+disconnect PARAMS ((int));
+
+static void
+source_cleanup PARAMS ((FILE *));
+
+/* If this definition isn't overridden by the header files, assume
+   that isatty and fileno exist on this system.  */
+#ifndef ISATTY
+#define ISATTY(FP)	(isatty (fileno (FP)))
+#endif
+
+/* Initialization file name for gdb.  This is overridden in some configs.  */
+
+#ifndef	GDBINIT_FILENAME
+#define	GDBINIT_FILENAME	".gdbinit"
+#endif
+char gdbinit[] = GDBINIT_FILENAME;
+int inhibit_gdbinit = 0;
+
+/* Version number of GDB, as a string.  */
+
+extern char *version;
+
+/* Canonical host name as a string. */
+
+extern char *host_name;
+
+/* Canonical target name as a string. */
+
+extern char *target_name;
+
+extern char lang_frame_mismatch_warn[];		/* language.c */
+
+/* Flag for whether we want all the "from_tty" gubbish printed.  */
+
+int caution = 1;			/* Default is yes, sigh. */
+
+/*
+ * Define all cmd_list_element's
+ */
+
+/* Chain containing all defined commands.  */
+
+struct cmd_list_element *cmdlist;
+
+/* Chain containing all defined info subcommands.  */
+
+struct cmd_list_element *infolist;
+
+/* Chain containing all defined enable subcommands. */
+
+struct cmd_list_element *enablelist;
+
+/* Chain containing all defined disable subcommands. */
+
+struct cmd_list_element *disablelist;
+
+/* Chain containing all defined delete subcommands. */
+
+struct cmd_list_element *deletelist;
+
+/* Chain containing all defined "enable breakpoint" subcommands. */
+
+struct cmd_list_element *enablebreaklist;
+
+/* Chain containing all defined set subcommands */
+
+struct cmd_list_element *setlist;
+
+/* Chain containing all defined unset subcommands */
+
+struct cmd_list_element *unsetlist;
+
+/* Chain containing all defined show subcommands.  */
+
+struct cmd_list_element *showlist;
+
+/* Chain containing all defined \"set history\".  */
+
+struct cmd_list_element *sethistlist;
+
+/* Chain containing all defined \"show history\".  */
+
+struct cmd_list_element *showhistlist;
+
+/* Chain containing all defined \"unset history\".  */
+
+struct cmd_list_element *unsethistlist;
+
+/* Chain containing all defined maintenance subcommands. */
+
+#if MAINTENANCE_CMDS
+struct cmd_list_element *maintenancelist;
+#endif
+
+/* Chain containing all defined "maintenance info" subcommands. */
+
+#if MAINTENANCE_CMDS
+struct cmd_list_element *maintenanceinfolist;
+#endif
+
+/* Chain containing all defined "maintenance print" subcommands. */
+
+#if MAINTENANCE_CMDS
+struct cmd_list_element *maintenanceprintlist;
+#endif
+
+struct cmd_list_element *setprintlist;
+
+struct cmd_list_element *showprintlist;
+
+struct cmd_list_element *setchecklist;
+
+struct cmd_list_element *showchecklist;
+
+/* stdio stream that command input is being read from.  Set to stdin normally.
+   Set by source_command to the file we are sourcing.  Set to NULL if we are
+   executing a user-defined command.  */
+
+FILE *instream;
+
+/* Current working directory.  */
+
+char *current_directory;
+
+/* The directory name is actually stored here (usually).  */
+char dirbuf[1024];
+
+/* Function to call before reading a command, if nonzero.
+   The function receives two args: an input stream,
+   and a prompt string.  */
+
+void (*window_hook) PARAMS ((FILE *, char *));
+
+int epoch_interface;
+int xgdb_verbose;
+
+/* gdb prints this when reading a command interactively */
+static char *prompt;
+
+/* Buffer used for reading command lines, and the size
+   allocated for it so far.  */
+
+char *line;
+int linesize = 100;
+
+/* Nonzero if the current command is modified by "server ".  This
+   affects things like recording into the command history, comamnds
+   repeating on RETURN, etc.  This is so a user interface (emacs, GUI,
+   whatever) can issue its own commands and also send along commands
+   from the user, and have the user not notice that the user interface
+   is issuing commands too.  */
+int server_command;
+
+/* Baud rate specified for talking to serial target systems.  Default
+   is left as -1, so targets can choose their own defaults.  */
+/* FIXME: This means that "show remotebaud" and gr_files_info can print -1
+   or (unsigned int)-1.  This is a Bad User Interface.  */
+
+int baud_rate = -1;
+
+/* Non-zero tells remote* modules to output debugging info.  */
+
+int remote_debug = 0;
+
+/* Signal to catch ^Z typed while reading a command: SIGTSTP or SIGCONT.  */
+
+#ifndef STOP_SIGNAL
+#ifdef SIGTSTP
+#define STOP_SIGNAL SIGTSTP
+static void stop_sig PARAMS ((int));
+#endif
+#endif
+
+/* Some System V have job control but not sigsetmask(). */
+#if !defined (HAVE_SIGSETMASK)
+#if !defined (USG)
+#define HAVE_SIGSETMASK 1
+#else
+#define HAVE_SIGSETMASK 0
+#endif
+#endif
+
+#if 0 == (HAVE_SIGSETMASK)
+#define sigsetmask(n)
+#endif
+
+/* Where to go for return_to_top_level (RETURN_ERROR).  */
+jmp_buf error_return;
+/* Where to go for return_to_top_level (RETURN_QUIT).  */
+jmp_buf quit_return;
+
+/* Return for reason REASON.  This generally gets back to the command
+   loop, but can be caught via catch_errors.  */
+
+NORETURN void
+return_to_top_level (reason)
+     enum return_reason reason;
+{
+  quit_flag = 0;
+  immediate_quit = 0;
+
+  /* Perhaps it would be cleaner to do this via the cleanup chain (not sure
+     I can think of a reason why that is vital, though).  */
+  bpstat_clear_actions(stop_bpstat);	/* Clear queued breakpoint commands */
+
+  disable_current_display ();
+  do_cleanups (ALL_CLEANUPS);
+
+  if (annotation_level > 1)
+    switch (reason)
+      {
+      case RETURN_QUIT:
+	annotate_quit ();
+	break;
+      case RETURN_ERROR:
+	annotate_error ();
+	break;
+      }
+
+  (NORETURN void) longjmp
+    (reason == RETURN_ERROR ? error_return : quit_return, 1);
+}
+
+/* Call FUNC with arg ARGS, catching any errors.  If there is no
+   error, return the value returned by FUNC.  If there is an error,
+   print ERRSTRING, print the specific error message, then return
+   zero.
+
+   Must not be called with immediate_quit in effect (bad things might
+   happen, say we got a signal in the middle of a memcpy to quit_return).
+   This is an OK restriction; with very few exceptions immediate_quit can
+   be replaced by judicious use of QUIT.
+
+   MASK specifies what to catch; it is normally set to
+   RETURN_MASK_ALL, if for no other reason than that the code which
+   calls catch_errors might not be set up to deal with a quit which
+   isn't caught.  But if the code can deal with it, it generally
+   should be RETURN_MASK_ERROR, unless for some reason it is more
+   useful to abort only the portion of the operation inside the
+   catch_errors.  Note that quit should return to the command line
+   fairly quickly, even if some further processing is being done.  */
+
+int
+catch_errors (func, args, errstring, mask)
+     int (*func) PARAMS ((char *));
+     PTR args;
+     char *errstring;
+     return_mask mask;
+{
+  jmp_buf saved_error;
+  jmp_buf saved_quit;
+  jmp_buf tmp_jmp;
+  int val;
+  struct cleanup *saved_cleanup_chain;
+  char *saved_error_pre_print;
+
+  saved_cleanup_chain = save_cleanups ();
+  saved_error_pre_print = error_pre_print;
+
+  if (mask & RETURN_MASK_ERROR)
+    memcpy ((char *)saved_error, (char *)error_return, sizeof (jmp_buf));
+  if (mask & RETURN_MASK_QUIT)
+    memcpy (saved_quit, quit_return, sizeof (jmp_buf));
+  error_pre_print = errstring;
+
+  if (setjmp (tmp_jmp) == 0)
+    {
+      if (mask & RETURN_MASK_ERROR)
+	memcpy (error_return, tmp_jmp, sizeof (jmp_buf));
+      if (mask & RETURN_MASK_QUIT)
+	memcpy (quit_return, tmp_jmp, sizeof (jmp_buf));
+      val = (*func) (args);
+    }
+  else
+    val = 0;
+
+  restore_cleanups (saved_cleanup_chain);
+
+  error_pre_print = saved_error_pre_print;
+  if (mask & RETURN_MASK_ERROR)
+    memcpy (error_return, saved_error, sizeof (jmp_buf));
+  if (mask & RETURN_MASK_QUIT)
+    memcpy (quit_return, saved_quit, sizeof (jmp_buf));
+  return val;
+}
+
+/* Handler for SIGHUP.  */
+
+static void
+disconnect (signo)
+int signo;
+{
+  catch_errors (quit_cover, NULL,
+		"Could not kill the program being debugged", RETURN_MASK_ALL);
+  signal (SIGHUP, SIG_DFL);
+  kill (getpid (), SIGHUP);
+}
+
+/* Just a little helper function for disconnect().  */
+
+static int
+quit_cover (s)
+char *s;
+{
+  caution = 0;		/* Throw caution to the wind -- we're exiting.
+			   This prevents asking the user dumb questions.  */
+  quit_command((char *)0, 0);
+  return 0;
+}
+
+/* Line number we are currently in in a file which is being sourced.  */
+static int source_line_number;
+
+/* Name of the file we are sourcing.  */
+static char *source_file_name;
+
+/* Buffer containing the error_pre_print used by the source stuff.
+   Malloc'd.  */
+static char *source_error;
+static int source_error_allocated;
+
+/* Something to glom on to the start of error_pre_print if source_file_name
+   is set.  */
+static char *source_pre_error;
+
+/* Clean up on error during a "source" command (or execution of a
+   user-defined command).  */
+
+static void
+source_cleanup (stream)
+     FILE *stream;
+{
+  /* Restore the previous input stream.  */
+  instream = stream;
+}
+
+/* Read commands from STREAM.  */
+void
+read_command_file (stream)
+     FILE *stream;
+{
+  struct cleanup *cleanups;
+
+  cleanups = make_cleanup (source_cleanup, instream);
+  instream = stream;
+  command_loop ();
+  do_cleanups (cleanups);
+}
+
+extern void init_proc ();
+
+void
+gdb_init ()
+{
+  /* Run the init function of each source file */
+
+  init_cmd_lists ();	/* This needs to be done first */
+  initialize_all_files ();
+  init_main ();		/* But that omits this file!  Do it now */
+  init_signals ();
+
+  init_proc ();
+
+  /* We need a default language for parsing expressions, so simple things like
+     "set width 0" won't fail if no language is explicitly set in a config file
+     or implicitly set by reading an executable during startup. */
+  set_language (language_c);
+  expected_language = current_language;	/* don't warn about the change.  */
+}
+
+void
+execute_user_command (c, args)
+     struct cmd_list_element *c;
+     char *args;
+{
+  register struct command_line *cmdlines;
+  struct cleanup *old_chain;
+  
+  if (args)
+    error ("User-defined commands cannot take arguments.");
+
+  cmdlines = c->user_commands;
+  if (cmdlines == 0)
+    /* Null command */
+    return;
+
+  /* Set the instream to 0, indicating execution of a
+     user-defined function.  */
+  old_chain = make_cleanup (source_cleanup, instream);
+  instream = (FILE *) 0;
+  while (cmdlines)
+    {
+      execute_command (cmdlines->line, 0);
+      cmdlines = cmdlines->next;
+    }
+  do_cleanups (old_chain);
+}
+
+/* Execute the line P as a command.
+   Pass FROM_TTY as second argument to the defining function.  */
+
+void
+execute_command (p, from_tty)
+     char *p;
+     int from_tty;
+{
+  register struct cmd_list_element *c;
+  register enum language flang;
+  static int warned = 0;
+
+  free_all_values ();
+
+  /* This can happen when command_line_input hits end of file.  */
+  if (p == NULL)
+      return;
+  
+  while (*p == ' ' || *p == '\t') p++;
+  if (*p)
+    {
+      char *arg;
+      
+      c = lookup_cmd (&p, cmdlist, "", 0, 1);
+      /* Pass null arg rather than an empty one.  */
+      arg = *p ? p : 0;
+
+      /* If this command has been hooked, run the hook first. */
+      if (c->hook)
+	execute_user_command (c->hook, (char *)0);
+
+      if (c->class == class_user)
+	execute_user_command (c, arg);
+      else if (c->type == set_cmd || c->type == show_cmd)
+	do_setshow_command (arg, from_tty & caution, c);
+      else if (c->function.cfunc == NO_FUNCTION)
+	error ("That is not a command, just a help topic.");
+      else
+	(*c->function.cfunc) (arg, from_tty & caution);
+   }
+
+  /* Tell the user if the language has changed (except first time).  */
+  if (current_language != expected_language)
+  {
+    if (language_mode == language_mode_auto) {
+      language_info (1);	/* Print what changed.  */
+    }
+    warned = 0;
+  }
+
+  /* Warn the user if the working language does not match the
+     language of the current frame.  Only warn the user if we are
+     actually running the program, i.e. there is a stack. */
+  /* FIXME:  This should be cacheing the frame and only running when
+     the frame changes.  */
+  if (target_has_stack)
+  {
+    flang = get_frame_language ();
+    if (!warned
+        && flang != language_unknown
+	&& flang != current_language->la_language)
+    {
+      printf_filtered ("%s\n", lang_frame_mismatch_warn);
+      warned = 1;
+    }
+  }
+}
+
+/* ARGSUSED */
+static void
+command_loop_marker (foo)
+     int foo;
+{
+}
+
+/* Read commands from `instream' and execute them
+   until end of file or error reading instream.  */
+void
+command_loop ()
+{
+  struct cleanup *old_chain;
+  char *command;
+  int stdin_is_tty = ISATTY (stdin);
+
+  while (!feof (instream))
+    {
+      if (window_hook && instream == stdin)
+	(*window_hook) (instream, prompt);
+
+      quit_flag = 0;
+      if (instream == stdin && stdin_is_tty)
+	reinitialize_more_filter ();
+      old_chain = make_cleanup (command_loop_marker, 0);
+      command = command_line_input (instream == stdin ? prompt : (char *) NULL,
+				    instream == stdin, "prompt");
+      if (command == 0)
+	return;
+      execute_command (command, instream == stdin);
+      /* Do any commands attached to breakpoint we stopped at.  */
+      bpstat_do_actions (&stop_bpstat);
+      do_cleanups (old_chain);
+    }
+}
+
+/* Commands call this if they do not want to be repeated by null lines.  */
+
+void
+dont_repeat ()
+{
+  if (server_command)
+    return;
+
+  /* If we aren't reading from standard input, we are saving the last
+     thing read from stdin in line and don't want to delete it.  Null lines
+     won't repeat here in any case.  */
+  if (instream == stdin)
+    *line = 0;
+}
+
+/* Read a line from the stream "instream" without command line editing.
+
+   It prints PRROMPT once at the start.
+   Action is compatible with "readline", e.g. space for the result is 
+   malloc'd and should be freed by the caller.
+
+   A NULL return means end of file.  */
+char *
+gdb_readline (prrompt)
+     char *prrompt;
+{
+  int c;
+  char *result;
+  int input_index = 0;
+  int result_size = 80;
+
+  if (prrompt)
+    {
+      /* Don't use a _filtered function here.  It causes the assumed
+	 character position to be off, since the newline we read from
+	 the user is not accounted for.  */
+      fputs_unfiltered (prrompt, gdb_stdout);
+/* start-sanitize-mpw */
+#ifdef MPW
+      /* Move to a new line so the entered line doesn't have a prompt
+	 on the front of it. */
+      fputs_unfiltered ("\n", gdb_stdout);
+#endif /* MPW */
+/* end-sanitize-mpw */
+      gdb_flush (gdb_stdout);
+    }
+  
+  result = (char *) xmalloc (result_size);
+
+  while (1)
+    {
+      /* Read from stdin if we are executing a user defined command.
+	 This is the right thing for prompt_for_continue, at least.  */
+      c = fgetc (instream ? instream : stdin);
+
+      if (c == EOF)
+	{
+	  if (input_index > 0)
+	    /* The last line does not end with a newline.  Return it, and
+	       if we are called again fgetc will still return EOF and
+	       we'll return NULL then.  */
+	    break;
+	  free (result);
+	  return NULL;
+	}
+
+      if (c == '\n')
+	break;
+
+      result[input_index++] = c;
+      while (input_index >= result_size)
+	{
+	  result_size *= 2;
+	  result = (char *) xrealloc (result, result_size);
+	}
+    }
+
+  result[input_index++] = '\0';
+  return result;
+}
+
+/* Variables which control command line editing and history
+   substitution.  These variables are given default values at the end
+   of this file.  */
+static int command_editing_p;
+static int history_expansion_p;
+static int write_history_p;
+static int history_size;
+static char *history_filename;
+
+/* readline uses the word breaks for two things:
+   (1) In figuring out where to point the TEXT parameter to the
+   rl_completion_entry_function.  Since we don't use TEXT for much,
+   it doesn't matter a lot what the word breaks are for this purpose, but
+   it does affect how much stuff M-? lists.
+   (2) If one of the matches contains a word break character, readline
+   will quote it.  That's why we switch between
+   gdb_completer_word_break_characters and
+   gdb_completer_command_word_break_characters.  I'm not sure when
+   we need this behavior (perhaps for funky characters in C++ symbols?).  */
+
+/* Variables which are necessary for fancy command line editing.  */
+char *gdb_completer_word_break_characters =
+  " \t\n!@#$%^&*()+=|~`}{[]\"';:?/>.<,-";
+
+/* When completing on command names, we remove '-' from the list of
+   word break characters, since we use it in command names.  If the
+   readline library sees one in any of the current completion strings,
+   it thinks that the string needs to be quoted and automatically supplies
+   a leading quote. */
+char *gdb_completer_command_word_break_characters =
+  " \t\n!@#$%^&*()+=|~`}{[]\"';:?/>.<,";
+
+/* Characters that can be used to quote completion strings.  Note that we
+   can't include '"' because the gdb C parser treats such quoted sequences
+   as strings. */
+char *gdb_completer_quote_characters =
+  "'";
+
+/* Functions that are used as part of the fancy command line editing.  */
+
+/* This can be used for functions which don't want to complete on symbols
+   but don't want to complete on anything else either.  */
+/* ARGSUSED */
+char **
+noop_completer (text, prefix)
+     char *text;
+     char *prefix;
+{
+  return NULL;
+}
+
+/* Complete on filenames.  */
+char **
+filename_completer (text, word)
+     char *text;
+     char *word;
+{
+  /* From readline.  */
+  extern char *filename_completion_function ();
+  int subsequent_name;
+  char **return_val;
+  int return_val_used;
+  int return_val_alloced;
+
+  return_val_used = 0;
+  /* Small for testing.  */
+  return_val_alloced = 1;
+  return_val = (char **) xmalloc (return_val_alloced * sizeof (char *));
+
+  subsequent_name = 0;
+  while (1)
+    {
+      char *p;
+      p = filename_completion_function (text, subsequent_name);
+      if (return_val_used >= return_val_alloced)
+	{
+	  return_val_alloced *= 2;
+	  return_val =
+	    (char **) xrealloc (return_val,
+				return_val_alloced * sizeof (char *));
+	}
+      if (p == NULL)
+	{
+	  return_val[return_val_used++] = p;
+	  break;
+	}
+      /* Like emacs, don't complete on old versions.  Especially useful
+	 in the "source" command.  */
+      if (p[strlen (p) - 1] == '~')
+	continue;
+
+      {
+	char *q;
+	if (word == text)
+	  /* Return exactly p.  */
+	  return_val[return_val_used++] = p;
+	else if (word > text)
+	  {
+	    /* Return some portion of p.  */
+	    q = xmalloc (strlen (p) + 5);
+	    strcpy (q, p + (word - text));
+	    return_val[return_val_used++] = q;
+	    free (p);
+	  }
+	else
+	  {
+	    /* Return some of TEXT plus p.  */
+	    q = xmalloc (strlen (p) + (text - word) + 5);
+	    strncpy (q, word, text - word);
+	    q[text - word] = '\0';
+	    strcat (q, p);
+	    return_val[return_val_used++] = q;
+	    free (p);
+	  }
+      }
+      subsequent_name = 1;
+    }
+#if 0
+  /* There is no way to do this just long enough to affect quote inserting
+     without also affecting the next completion.  This should be fixed in
+     readline.  FIXME.  */
+  /* Insure that readline does the right thing
+     with respect to inserting quotes.  */
+  rl_completer_word_break_characters = "";
+#endif
+  return return_val;
+}
+
+/* Here are some useful test cases for completion.  FIXME: These should
+   be put in the test suite.  They should be tested with both M-? and TAB.
+
+   "show output-" "radix"
+   "show output" "-radix"
+   "p" ambiguous (commands starting with p--path, print, printf, etc.)
+   "p "  ambiguous (all symbols)
+   "info t foo" no completions
+   "info t " no completions
+   "info t" ambiguous ("info target", "info terminal", etc.)
+   "info ajksdlfk" no completions
+   "info ajksdlfk " no completions
+   "info" " "
+   "info " ambiguous (all info commands)
+   "p \"a" no completions (string constant)
+   "p 'a" ambiguous (all symbols starting with a)
+   "p b-a" ambiguous (all symbols starting with a)
+   "p b-" ambiguous (all symbols)
+   "file Make" "file" (word break hard to screw up here)
+   "file ../gdb.stabs/we" "ird" (needs to not break word at slash)
+   */
+
+/* Generate completions one by one for the completer.  Each time we are
+   called return another potential completion to the caller.  The function
+   is misnamed; it just completes on commands or passes the buck to the
+   command's completer function; the stuff specific to symbol completion
+   is in make_symbol_completion_list.
+
+   TEXT is readline's idea of the "word" we are looking at; we don't really
+   like readline's ideas about word breaking so we ignore it.
+
+   MATCHES is the number of matches that have currently been collected from
+   calling this completion function.  When zero, then we need to initialize,
+   otherwise the initialization has already taken place and we can just
+   return the next potential completion string.
+
+   Returns NULL if there are no more completions, else a pointer to a string
+   which is a possible completion.
+
+   RL_LINE_BUFFER is available to be looked at; it contains the entire text
+   of the line.  RL_POINT is the offset in that line of the cursor.  You
+   should pretend that the line ends at RL_POINT. */
+
+static char *
+symbol_completion_function (text, matches)
+     char *text;
+     int matches;
+{
+  static char **list = (char **)NULL;		/* Cache of completions */
+  static int index;				/* Next cached completion */
+  char *output = NULL;
+  char *tmp_command, *p;
+  /* Pointer within tmp_command which corresponds to text.  */
+  char *word;
+  struct cmd_list_element *c, *result_list;
+
+  if (matches == 0)
+    {
+      /* The caller is beginning to accumulate a new set of completions, so
+	 we need to find all of them now, and cache them for returning one at
+	 a time on future calls. */
+
+      if (list)
+	{
+	  /* Free the storage used by LIST, but not by the strings inside.
+	     This is because rl_complete_internal () frees the strings. */
+	  free ((PTR)list);
+	}
+      list = 0;
+      index = 0;
+
+      /* Choose the default set of word break characters to break completions.
+	 If we later find out that we are doing completions on command strings
+	 (as opposed to strings supplied by the individual command completer
+	 functions, which can be any string) then we will switch to the
+	 special word break set for command strings, which leaves out the
+	 '-' character used in some commands.  */
+
+      rl_completer_word_break_characters =
+	  gdb_completer_word_break_characters;
+
+      /* Decide whether to complete on a list of gdb commands or on symbols. */
+      tmp_command = (char *) alloca (rl_point + 1);
+      p = tmp_command;
+
+      strncpy (tmp_command, rl_line_buffer, rl_point);
+      tmp_command[rl_point] = '\0';
+      /* Since text always contains some number of characters leading up
+	 to rl_point, we can find the equivalent position in tmp_command
+	 by subtracting that many characters from the end of tmp_command.  */
+      word = tmp_command + rl_point - strlen (text);
+
+      if (rl_point == 0)
+	{
+	  /* An empty line we want to consider ambiguous; that is, it
+	     could be any command.  */
+	  c = (struct cmd_list_element *) -1;
+	  result_list = 0;
+	}
+      else
+	{
+	  c = lookup_cmd_1 (&p, cmdlist, &result_list, 1);
+	}
+
+      /* Move p up to the next interesting thing.  */
+      while (*p == ' ' || *p == '\t')
+	{
+	  p++;
+	}
+
+      if (!c)
+	{
+	  /* It is an unrecognized command.  So there are no
+	     possible completions.  */
+	  list = NULL;
+	}
+      else if (c == (struct cmd_list_element *) -1)
+	{
+	  char *q;
+
+	  /* lookup_cmd_1 advances p up to the first ambiguous thing, but
+	     doesn't advance over that thing itself.  Do so now.  */
+	  q = p;
+	  while (*q && (isalnum (*q) || *q == '-' || *q == '_'))
+	    ++q;
+	  if (q != tmp_command + rl_point)
+	    {
+	      /* There is something beyond the ambiguous
+		 command, so there are no possible completions.  For
+		 example, "info t " or "info t foo" does not complete
+		 to anything, because "info t" can be "info target" or
+		 "info terminal".  */
+	      list = NULL;
+	    }
+	  else
+	    {
+	      /* We're trying to complete on the command which was ambiguous.
+		 This we can deal with.  */
+	      if (result_list)
+		{
+		  list = complete_on_cmdlist (*result_list->prefixlist, p,
+					      word);
+		}
+	      else
+		{
+		  list = complete_on_cmdlist (cmdlist, p, word);
+		}
+	      /* Insure that readline does the right thing with respect to
+		 inserting quotes.  */
+	      rl_completer_word_break_characters =
+		gdb_completer_command_word_break_characters;
+	    }
+	}
+      else
+	{
+	  /* We've recognized a full command.  */
+
+	  if (p == tmp_command + rl_point)
+	    {
+	      /* There is no non-whitespace in the line beyond the command.  */
+
+	      if (p[-1] == ' ' || p[-1] == '\t')
+		{
+		  /* The command is followed by whitespace; we need to complete
+		     on whatever comes after command.  */
+		  if (c->prefixlist)
+		    {
+		      /* It is a prefix command; what comes after it is
+			 a subcommand (e.g. "info ").  */
+		      list = complete_on_cmdlist (*c->prefixlist, p, word);
+
+		      /* Insure that readline does the right thing
+			 with respect to inserting quotes.  */
+		      rl_completer_word_break_characters =
+			gdb_completer_command_word_break_characters;
+		    }
+		  else
+		    {
+		      /* It is a normal command; what comes after it is
+			 completed by the command's completer function.  */
+		      list = (*c->completer) (p, word);
+		    }
+		}
+	      else
+		{
+		  /* The command is not followed by whitespace; we need to
+		     complete on the command itself.  e.g. "p" which is a
+		     command itself but also can complete to "print", "ptype"
+		     etc.  */
+		  char *q;
+
+		  /* Find the command we are completing on.  */
+		  q = p;
+		  while (q > tmp_command)
+		    {
+		      if (isalnum (q[-1]) || q[-1] == '-' || q[-1] == '_')
+			--q;
+		      else
+			break;
+		    }
+
+		  list = complete_on_cmdlist (result_list, q, word);
+
+		  /* Insure that readline does the right thing
+		     with respect to inserting quotes.  */
+		  rl_completer_word_break_characters =
+		    gdb_completer_command_word_break_characters;
+		}
+	    }
+	  else
+	    {
+	      /* There is non-whitespace beyond the command.  */
+
+	      if (c->prefixlist && !c->allow_unknown)
+		{
+		  /* It is an unrecognized subcommand of a prefix command,
+		     e.g. "info adsfkdj".  */
+		  list = NULL;
+		}
+	      else
+		{
+		  /* It is a normal command.  */
+		  list = (*c->completer) (p, word);
+		}
+	    }
+	}
+    }
+
+  /* If we found a list of potential completions during initialization then
+     dole them out one at a time.  The vector of completions is NULL
+     terminated, so after returning the last one, return NULL (and continue
+     to do so) each time we are called after that, until a new list is
+     available. */
+
+  if (list)
+    {
+      output = list[index];
+      if (output)
+	{
+	  index++;
+	}
+    }
+
+#if 0
+  /* Can't do this because readline hasn't yet checked the word breaks
+     for figuring out whether to insert a quote.  */
+  if (output == NULL)
+    /* Make sure the word break characters are set back to normal for the
+       next time that readline tries to complete something.  */
+    rl_completer_word_break_characters =
+      gdb_completer_word_break_characters;
+#endif
+
+  return (output);
+}
+
+/* Skip over a possibly quoted word (as defined by the quote characters
+   and word break characters the completer uses).  Returns pointer to the
+   location after the "word". */
+
+char *
+skip_quoted (str)
+     char *str;
+{
+  char quote_char = '\0';
+  char *scan;
+
+  for (scan = str; *scan != '\0'; scan++)
+    {
+      if (quote_char != '\0')
+	{
+	  /* Ignore everything until the matching close quote char */
+	  if (*scan == quote_char)
+	    {
+	      /* Found matching close quote. */
+	      scan++;
+	      break;
+	    }
+	}
+      else if (strchr (gdb_completer_quote_characters, *scan))
+	{
+	  /* Found start of a quoted string. */
+	  quote_char = *scan;
+	}
+      else if (strchr (gdb_completer_word_break_characters, *scan))
+	{
+	  break;
+	}
+    }
+  return (scan);
+}
+
+
+#ifdef STOP_SIGNAL
+static void
+stop_sig (signo)
+int signo;
+{
+#if STOP_SIGNAL == SIGTSTP
+  signal (SIGTSTP, SIG_DFL);
+  sigsetmask (0);
+  kill (getpid (), SIGTSTP);
+  signal (SIGTSTP, stop_sig);
+#else
+  signal (STOP_SIGNAL, stop_sig);
+#endif
+  printf_unfiltered ("%s", prompt);
+  gdb_flush (gdb_stdout);
+
+  /* Forget about any previous command -- null line now will do nothing.  */
+  dont_repeat ();
+}
+#endif /* STOP_SIGNAL */
+
+/* Initialize signal handlers. */
+static void
+do_nothing (signo)
+int signo;
+{
+}
+
+static void
+init_signals ()
+{
+  signal (SIGINT, request_quit);
+
+  /* If we initialize SIGQUIT to SIG_IGN, then the SIG_IGN will get
+     passed to the inferior, which we don't want.  It would be
+     possible to do a "signal (SIGQUIT, SIG_DFL)" after we fork, but
+     on BSD4.3 systems using vfork, that can affect the
+     GDB process as well as the inferior (the signal handling tables
+     might be in memory, shared between the two).  Since we establish
+     a handler for SIGQUIT, when we call exec it will set the signal
+     to SIG_DFL for us.  */
+  signal (SIGQUIT, do_nothing);
+  if (signal (SIGHUP, do_nothing) != SIG_IGN)
+    signal (SIGHUP, disconnect);
+  signal (SIGFPE, float_handler);
+
+#if defined(SIGWINCH) && defined(SIGWINCH_HANDLER)
+  signal (SIGWINCH, SIGWINCH_HANDLER);
+#endif
+}
+
+/* Read one line from the command input stream `instream'
+   into the local static buffer `linebuffer' (whose current length
+   is `linelength').
+   The buffer is made bigger as necessary.
+   Returns the address of the start of the line.
+
+   NULL is returned for end of file.
+
+   *If* the instream == stdin & stdin is a terminal, the line read
+   is copied into the file line saver (global var char *line,
+   length linesize) so that it can be duplicated.
+
+   This routine either uses fancy command line editing or
+   simple input as the user has requested.  */
+
+char *
+command_line_input (prrompt, repeat, annotation_suffix)
+     char *prrompt;
+     int repeat;
+     char *annotation_suffix;
+{
+  static char *linebuffer = 0;
+  static unsigned linelength = 0;
+  register char *p;
+  char *p1;
+  char *rl;
+  char *local_prompt = prrompt;
+  register int c;
+  char *nline;
+  char got_eof = 0;
+
+  if (annotation_level > 1 && instream == stdin)
+    {
+      local_prompt = alloca ((prrompt == NULL ? 0 : strlen (prrompt))
+			     + strlen (annotation_suffix) + 40);
+      if (prrompt == NULL)
+	local_prompt[0] = '\0';
+      else
+	strcpy (local_prompt, prrompt);
+      strcat (local_prompt, "\n\032\032");
+      strcat (local_prompt, annotation_suffix);
+      strcat (local_prompt, "\n");
+    }
+
+  if (linebuffer == 0)
+    {
+      linelength = 80;
+      linebuffer = (char *) xmalloc (linelength);
+    }
+
+  p = linebuffer;
+
+  /* Control-C quits instantly if typed while in this loop
+     since it should not wait until the user types a newline.  */
+  immediate_quit++;
+#ifdef STOP_SIGNAL
+  if (job_control)
+    signal (STOP_SIGNAL, stop_sig);
+#endif
+
+  while (1)
+    {
+      /* Make sure that all output has been output.  Some machines may let
+	 you get away with leaving out some of the gdb_flush, but not all.  */
+      wrap_here ("");
+      gdb_flush (gdb_stdout);
+      gdb_flush (gdb_stderr);
+
+      if (source_file_name != NULL)
+	{
+	  ++source_line_number;
+	  sprintf (source_error,
+		   "%s%s:%d: Error in sourced command file:\n",
+		   source_pre_error,
+		   source_file_name,
+		   source_line_number);
+	  error_pre_print = source_error;
+	}
+
+      if (annotation_level > 1 && instream == stdin)
+	{
+	  printf_unfiltered ("\n\032\032pre-");
+	  printf_unfiltered (annotation_suffix);
+	  printf_unfiltered ("\n");
+	}
+
+      /* Don't use fancy stuff if not talking to stdin.  */
+      if (command_editing_p && instream == stdin
+	  && ISATTY (instream))
+	rl = readline (local_prompt);
+      else
+	rl = gdb_readline (local_prompt);
+
+      if (annotation_level > 1 && instream == stdin)
+	{
+	  printf_unfiltered ("\n\032\032post-");
+	  printf_unfiltered (annotation_suffix);
+	  printf_unfiltered ("\n");
+	}
+
+      if (!rl || rl == (char *) EOF)
+	{
+	  got_eof = 1;
+	  break;
+	}
+      if (strlen(rl) + 1 + (p - linebuffer) > linelength)
+	{
+	  linelength = strlen(rl) + 1 + (p - linebuffer);
+	  nline = (char *) xrealloc (linebuffer, linelength);
+	  p += nline - linebuffer;
+	  linebuffer = nline;
+	}
+      p1 = rl;
+      /* Copy line.  Don't copy null at end.  (Leaves line alone
+         if this was just a newline)  */
+      while (*p1)
+	*p++ = *p1++;
+
+      free (rl);			/* Allocated in readline.  */
+
+      if (p == linebuffer || *(p - 1) != '\\')
+	break;
+
+      p--;			/* Put on top of '\'.  */
+      local_prompt = (char *) 0;
+  }
+
+#ifdef STOP_SIGNAL
+  if (job_control)
+    signal (STOP_SIGNAL, SIG_DFL);
+#endif
+  immediate_quit--;
+
+  if (got_eof)
+    return NULL;
+
+#define SERVER_COMMAND_LENGTH 7
+  server_command =
+    (p - linebuffer > SERVER_COMMAND_LENGTH)
+      && STREQN (linebuffer, "server ", SERVER_COMMAND_LENGTH);
+  if (server_command)
+    {
+      /* Note that we don't set `line'.  Between this and the check in
+	 dont_repeat, this insures that repeating will still do the
+	 right thing.  */
+      *p = '\0';
+      return linebuffer + SERVER_COMMAND_LENGTH;
+    }
+
+  /* Do history expansion if that is wished.  */
+  if (history_expansion_p && instream == stdin
+      && ISATTY (instream))
+    {
+      char *history_value;
+      int expanded;
+
+      *p = '\0';		/* Insert null now.  */
+      expanded = history_expand (linebuffer, &history_value);
+      if (expanded)
+	{
+	  /* Print the changes.  */
+	  printf_unfiltered ("%s\n", history_value);
+
+	  /* If there was an error, call this function again.  */
+	  if (expanded < 0)
+	    {
+	      free (history_value);
+	      return command_line_input (prrompt, repeat, annotation_suffix);
+	    }
+	  if (strlen (history_value) > linelength)
+	    {
+	      linelength = strlen (history_value) + 1;
+	      linebuffer = (char *) xrealloc (linebuffer, linelength);
+	    }
+	  strcpy (linebuffer, history_value);
+	  p = linebuffer + strlen(linebuffer);
+	  free (history_value);
+	}
+    }
+
+  /* If we just got an empty line, and that is supposed
+     to repeat the previous command, return the value in the
+     global buffer.  */
+  if (repeat)
+    {
+      if (p == linebuffer)
+	return line;
+      p1 = linebuffer;
+      while (*p1 == ' ' || *p1 == '\t')
+	p1++;
+      if (!*p1)
+	return line;
+    }
+
+  *p = 0;
+
+  /* Add line to history if appropriate.  */
+  if (instream == stdin
+      && ISATTY (stdin) && *linebuffer)
+    add_history (linebuffer);
+
+  /* Note: lines consisting solely of comments are added to the command
+     history.  This is useful when you type a command, and then
+     realize you don't want to execute it quite yet.  You can comment
+     out the command and then later fetch it from the value history
+     and remove the '#'.  The kill ring is probably better, but some
+     people are in the habit of commenting things out.  */
+  p1 = linebuffer;
+  while ((c = *p1++) != '\0')
+    {
+      if (c == '"')
+	while ((c = *p1++) != '"')
+	  {
+	    /* Make sure an escaped '"' doesn't make us think the string
+	       is ended.  */
+	    if (c == '\\')
+	      parse_escape (&p1);
+	    if (c == '\0')
+	      break;
+	  }
+      else if (c == '\'')
+	while ((c = *p1++) != '\'')
+	  {
+	    /* Make sure an escaped '\'' doesn't make us think the string
+	       is ended.  */
+	    if (c == '\\')
+	      parse_escape (&p1);
+	    if (c == '\0')
+	      break;
+	  }
+      else if (c == '#')
+	{
+	  /* Found a comment.  */
+	  p1[-1] = '\0';
+	  break;
+	}
+    }
+
+  /* Save into global buffer if appropriate.  */
+  if (repeat)
+    {
+      if (linelength > linesize)
+	{
+	  line = xrealloc (line, linelength);
+	  linesize = linelength;
+	}
+      strcpy (line, linebuffer);
+      return line;
+    }
+
+  return linebuffer;
+}
+
+/* Read lines from the input stream
+   and accumulate them in a chain of struct command_line's
+   which is then returned.  */
+
+struct command_line *
+read_command_lines ()
+{
+  struct command_line *first = 0;
+  register struct command_line *next, *tail = 0;
+  register char *p, *p1;
+  struct cleanup *old_chain = 0;
+
+  while (1)
+    {
+      dont_repeat ();
+      p = command_line_input ((char *) NULL, instream == stdin, "commands");
+      if (p == NULL)
+	/* Treat end of file like "end".  */
+	break;
+      
+      /* Remove leading and trailing blanks.  */
+      while (*p == ' ' || *p == '\t') p++;
+      p1 = p + strlen (p);
+      while (p1 != p && (p1[-1] == ' ' || p1[-1] == '\t')) p1--;
+
+      /* Is this "end"?  */
+      if (p1 - p == 3 && !strncmp (p, "end", 3))
+	break;
+
+      /* No => add this line to the chain of command lines.  */
+      next = (struct command_line *) xmalloc (sizeof (struct command_line));
+      next->line = savestring (p, p1 - p);
+      next->next = 0;
+      if (tail)
+	{
+	  tail->next = next;
+	}
+      else
+	{
+	  /* We just read the first line.
+	     From now on, arrange to throw away the lines we have
+	     if we quit or get an error while inside this function.  */
+	  first = next;
+	  old_chain = make_cleanup (free_command_lines, &first);
+	}
+      tail = next;
+    }
+
+  dont_repeat ();
+
+  /* Now we are about to return the chain to our caller,
+     so freeing it becomes his responsibility.  */
+  if (first)
+    discard_cleanups (old_chain);
+  return first;
+}
+
+/* Free a chain of struct command_line's.  */
+
+void
+free_command_lines (lptr)
+      struct command_line **lptr;
+{
+  register struct command_line *l = *lptr;
+  register struct command_line *next;
+
+  while (l)
+    {
+      next = l->next;
+      free (l->line);
+      free ((PTR)l);
+      l = next;
+    }
+}
+
+/* Add an element to the list of info subcommands.  */
+
+void
+add_info (name, fun, doc)
+     char *name;
+     void (*fun) PARAMS ((char *, int));
+     char *doc;
+{
+  add_cmd (name, no_class, fun, doc, &infolist);
+}
+
+/* Add an alias to the list of info subcommands.  */
+
+void
+add_info_alias (name, oldname, abbrev_flag)
+     char *name;
+     char *oldname;
+     int abbrev_flag;
+{
+  add_alias_cmd (name, oldname, 0, abbrev_flag, &infolist);
+}
+
+/* The "info" command is defined as a prefix, with allow_unknown = 0.
+   Therefore, its own definition is called only for "info" with no args.  */
+
+/* ARGSUSED */
+static void
+info_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  printf_unfiltered ("\"info\" must be followed by the name of an info command.\n");
+  help_list (infolist, "info ", -1, gdb_stdout);
+}
+
+/* The "complete" command is used by Emacs to implement completion.  */
+
+/* ARGSUSED */
+static void
+complete_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  int i;
+  char *completion;
+
+  dont_repeat ();
+
+  if (arg == NULL)
+    {
+      rl_line_buffer[0] = '\0';
+      rl_point = 0;
+    }
+  else
+    {
+      strcpy (rl_line_buffer, arg);
+      rl_point = strlen (arg);
+    }
+
+  for (completion = symbol_completion_function (rl_line_buffer, i = 0);
+       completion;
+       completion = symbol_completion_function (rl_line_buffer, ++i))
+    printf_unfiltered ("%s\n", completion);
+}
+
+/* The "show" command with no arguments shows all the settings.  */
+
+/* ARGSUSED */
+static void
+show_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  cmd_show_list (showlist, from_tty, "");
+}
+
+/* Add an element to the list of commands.  */
+
+void
+add_com (name, class, fun, doc)
+     char *name;
+     enum command_class class;
+     void (*fun) PARAMS ((char *, int));
+     char *doc;
+{
+  add_cmd (name, class, fun, doc, &cmdlist);
+}
+
+/* Add an alias or abbreviation command to the list of commands.  */
+
+void
+add_com_alias (name, oldname, class, abbrev_flag)
+     char *name;
+     char *oldname;
+     enum command_class class;
+     int abbrev_flag;
+{
+  add_alias_cmd (name, oldname, class, abbrev_flag, &cmdlist);
+}
+
+void
+error_no_arg (why)
+     char *why;
+{
+  error ("Argument required (%s).", why);
+}
+
+/* ARGSUSED */
+static void
+help_command (command, from_tty)
+     char *command;
+     int from_tty; /* Ignored */
+{
+  help_cmd (command, gdb_stdout);
+}
+
+static void
+validate_comname (comname)
+     char *comname;
+{
+  register char *p;
+
+  if (comname == 0)
+    error_no_arg ("name of command to define");
+
+  p = comname;
+  while (*p)
+    {
+      if (!isalnum(*p) && *p != '-')
+	error ("Junk in argument list: \"%s\"", p);
+      p++;
+    }
+}
+
+/* This is just a placeholder in the command data structures.  */
+static void
+user_defined_command (ignore, from_tty)
+     char *ignore;
+     int from_tty;
+{
+}
+
+static void
+define_command (comname, from_tty)
+     char *comname;
+     int from_tty;
+{
+  register struct command_line *cmds;
+  register struct cmd_list_element *c, *newc, *hookc = 0;
+  char *tem = comname;
+#define	HOOK_STRING	"hook-"
+#define	HOOK_LEN 5
+
+  validate_comname (comname);
+
+  /* Look it up, and verify that we got an exact match.  */
+  c = lookup_cmd (&tem, cmdlist, "", -1, 1);
+  if (c && !STREQ (comname, c->name))
+    c = 0;
+    
+  if (c)
+    {
+      if (c->class == class_user || c->class == class_alias)
+	tem = "Redefine command \"%s\"? ";
+      else
+	tem = "Really redefine built-in command \"%s\"? ";
+      if (!query (tem, c->name))
+	error ("Command \"%s\" not redefined.", c->name);
+    }
+
+  /* If this new command is a hook, then mark the command which it
+     is hooking.  Note that we allow hooking `help' commands, so that
+     we can hook the `stop' pseudo-command.  */
+
+  if (!strncmp (comname, HOOK_STRING, HOOK_LEN))
+    {
+      /* Look up cmd it hooks, and verify that we got an exact match.  */
+      tem = comname+HOOK_LEN;
+      hookc = lookup_cmd (&tem, cmdlist, "", -1, 0);
+      if (hookc && !STREQ (comname+HOOK_LEN, hookc->name))
+	hookc = 0;
+      if (!hookc)
+	{
+	  warning ("Your new `%s' command does not hook any existing command.",
+		   comname);
+	  if (!query ("Proceed? ", (char *)0))
+	    error ("Not confirmed.");
+	}
+    }
+
+  comname = savestring (comname, strlen (comname));
+
+  /* If the rest of the commands will be case insensitive, this one 
+     should behave in the same manner. */
+  for (tem = comname; *tem; tem++)
+    if (isupper(*tem)) *tem = tolower(*tem);
+
+  if (from_tty)
+    {
+      printf_unfiltered ("Type commands for definition of \"%s\".\n\
+End with a line saying just \"end\".\n", comname);
+      gdb_flush (gdb_stdout);
+    }
+
+  cmds = read_command_lines ();
+
+  if (c && c->class == class_user)
+    free_command_lines (&c->user_commands);
+
+  newc = add_cmd (comname, class_user, user_defined_command,
+	   (c && c->class == class_user)
+	   ? c->doc : savestring ("User-defined.", 13), &cmdlist);
+  newc->user_commands = cmds;
+
+  /* If this new command is a hook, then mark both commands as being
+     tied.  */
+  if (hookc)
+    {
+      hookc->hook = newc;	/* Target gets hooked.  */
+      newc->hookee = hookc;	/* We are marked as hooking target cmd.  */
+    }
+}
+
+static void
+document_command (comname, from_tty)
+     char *comname;
+     int from_tty;
+{
+  struct command_line *doclines;
+  register struct cmd_list_element *c;
+  char *tem = comname;
+
+  validate_comname (comname);
+
+  c = lookup_cmd (&tem, cmdlist, "", 0, 1);
+
+  if (c->class != class_user)
+    error ("Command \"%s\" is built-in.", comname);
+
+  if (from_tty)
+    printf_unfiltered ("Type documentation for \"%s\".\n\
+End with a line saying just \"end\".\n", comname);
+
+  doclines = read_command_lines ();
+
+  if (c->doc) free (c->doc);
+
+  {
+    register struct command_line *cl1;
+    register int len = 0;
+
+    for (cl1 = doclines; cl1; cl1 = cl1->next)
+      len += strlen (cl1->line) + 1;
+
+    c->doc = (char *) xmalloc (len + 1);
+    *c->doc = 0;
+
+    for (cl1 = doclines; cl1; cl1 = cl1->next)
+      {
+	strcat (c->doc, cl1->line);
+	if (cl1->next)
+	  strcat (c->doc, "\n");
+      }
+  }
+
+  free_command_lines (&doclines);
+}
+
+void
+print_gnu_advertisement ()
+{
+    printf_unfiltered ("\
+GDB is free software and you are welcome to distribute copies of it\n\
+ under certain conditions; type \"show copying\" to see the conditions.\n\
+There is absolutely no warranty for GDB; type \"show warranty\" for details.\n\
+");
+}
+
+void
+print_gdb_version (stream)
+  GDB_FILE *stream;
+{
+  fprintf_filtered (stream, "\
+GDB %s (%s", version, host_name);
+
+  if (!STREQ (host_name, target_name))
+    fprintf_filtered (stream, " --target %s", target_name);
+
+  fprintf_filtered (stream, "), ");
+  wrap_here("");
+  fprintf_filtered (stream, "Copyright 1994 Free Software Foundation, Inc.");
+}
+
+/* ARGSUSED */
+static void
+show_version (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  immediate_quit++;
+  print_gnu_advertisement ();
+  print_gdb_version (gdb_stdout);
+  printf_filtered ("\n");
+  immediate_quit--;
+}
+
+/* xgdb calls this to reprint the usual GDB prompt.  Obsolete now that xgdb
+   is obsolete.  */
+
+void
+print_prompt ()
+{
+  printf_unfiltered ("%s", prompt);
+  gdb_flush (gdb_stdout);
+}
+
+void
+quit_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  if (inferior_pid != 0 && target_has_execution)
+    {
+      if (attach_flag)
+	{
+	  if (query ("The program is running.  Quit anyway (and detach it)? "))
+	    target_detach (args, from_tty);
+	  else
+	    error ("Not confirmed.");
+	}
+      else
+	{
+	  if (query ("The program is running.  Quit anyway (and kill it)? "))
+	    target_kill ();
+	  else
+	    error ("Not confirmed.");
+	}
+    }
+  /* UDI wants this, to kill the TIP.  */
+  target_close (1);
+
+  /* Save the history information if it is appropriate to do so.  */
+  if (write_history_p && history_filename)
+    write_history (history_filename);
+
+  exit (0);
+}
+
+/* Returns whether GDB is running on a terminal and whether the user
+   desires that questions be asked of them on that terminal.  */
+
+int
+input_from_terminal_p ()
+{
+  return gdb_has_a_terminal () && (instream == stdin) & caution;
+}
+
+/* ARGSUSED */
+static void
+pwd_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  if (args) error ("The \"pwd\" command does not take an argument: %s", args);
+  getcwd (dirbuf, sizeof (dirbuf));
+
+  if (!STREQ (dirbuf, current_directory))
+    printf_unfiltered ("Working directory %s\n (canonically %s).\n",
+	    current_directory, dirbuf);
+  else
+    printf_unfiltered ("Working directory %s.\n", current_directory);
+}
+
+void
+cd_command (dir, from_tty)
+     char *dir;
+     int from_tty;
+{
+  int len;
+  /* Found something other than leading repetitions of "/..".  */
+  int found_real_path;
+  char *p;
+
+  /* If the new directory is absolute, repeat is a no-op; if relative,
+     repeat might be useful but is more likely to be a mistake.  */
+  dont_repeat ();
+
+  if (dir == 0)
+    error_no_arg ("new working directory");
+
+  dir = tilde_expand (dir);
+  make_cleanup (free, dir);
+
+  if (chdir (dir) < 0)
+    perror_with_name (dir);
+
+  len = strlen (dir);
+  dir = savestring (dir, len - (len > 1 && dir[len-1] == '/'));
+  if (dir[0] == '/')
+    current_directory = dir;
+  else
+    {
+      if (current_directory[0] == '/' && current_directory[1] == '\0')
+	current_directory = concat (current_directory, dir, NULL);
+      else
+	current_directory = concat (current_directory, "/", dir, NULL);
+      free (dir);
+    }
+
+  /* Now simplify any occurrences of `.' and `..' in the pathname.  */
+
+  found_real_path = 0;
+  for (p = current_directory; *p;)
+    {
+      if (p[0] == '/' && p[1] == '.' && (p[2] == 0 || p[2] == '/'))
+	strcpy (p, p + 2);
+      else if (p[0] == '/' && p[1] == '.' && p[2] == '.'
+	       && (p[3] == 0 || p[3] == '/'))
+	{
+	  if (found_real_path)
+	    {
+	      /* Search backwards for the directory just before the "/.."
+		 and obliterate it and the "/..".  */
+	      char *q = p;
+	      while (q != current_directory && q[-1] != '/')
+		--q;
+
+	      if (q == current_directory)
+		/* current_directory is
+		   a relative pathname ("can't happen"--leave it alone).  */
+		++p;
+	      else
+		{
+		  strcpy (q - 1, p + 3);
+		  p = q - 1;
+		}
+	    }
+	  else
+	    /* We are dealing with leading repetitions of "/..", for example
+	       "/../..", which is the Mach super-root.  */
+	    p += 3;
+	}
+      else
+	{
+	  found_real_path = 1;
+	  ++p;
+	}
+    }
+
+  forget_cached_source_info ();
+
+  if (from_tty)
+    pwd_command ((char *) 0, 1);
+}
+
+struct source_cleanup_lines_args {
+  int old_line;
+  char *old_file;
+  char *old_pre_error;
+  char *old_error_pre_print;
+};
+
+static void
+source_cleanup_lines (args)
+     PTR args;
+{
+  struct source_cleanup_lines_args *p =
+    (struct source_cleanup_lines_args *)args;
+  source_line_number = p->old_line;
+  source_file_name = p->old_file;
+  source_pre_error = p->old_pre_error;
+  error_pre_print = p->old_error_pre_print;
+}
+
+/* ARGSUSED */
+void
+source_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  FILE *stream;
+  struct cleanup *old_cleanups;
+  char *file = args;
+  struct source_cleanup_lines_args old_lines;
+  int needed_length;
+
+  if (file == NULL)
+    {
+      error ("source command requires pathname of file to source.");
+    }
+
+  file = tilde_expand (file);
+  old_cleanups = make_cleanup (free, file);
+
+  stream = fopen (file, FOPEN_RT);
+  if (stream == 0)
+    perror_with_name (file);
+
+  make_cleanup (fclose, stream);
+
+  old_lines.old_line = source_line_number;
+  old_lines.old_file = source_file_name;
+  old_lines.old_pre_error = source_pre_error;
+  old_lines.old_error_pre_print = error_pre_print;
+  make_cleanup (source_cleanup_lines, &old_lines);
+  source_line_number = 0;
+  source_file_name = file;
+  source_pre_error = error_pre_print == NULL ? "" : error_pre_print;
+  source_pre_error = savestring (source_pre_error, strlen (source_pre_error));
+  make_cleanup (free, source_pre_error);
+  /* This will get set every time we read a line.  So it won't stay "" for
+     long.  */
+  error_pre_print = "";
+
+  needed_length = strlen (source_file_name) + strlen (source_pre_error) + 80;
+  if (source_error_allocated < needed_length)
+    {
+      source_error_allocated *= 2;
+      if (source_error_allocated < needed_length)
+	source_error_allocated = needed_length;
+      if (source_error == NULL)
+	source_error = xmalloc (source_error_allocated);
+      else
+	source_error = xrealloc (source_error, source_error_allocated);
+    }
+
+  read_command_file (stream);
+
+  do_cleanups (old_cleanups);
+}
+
+/* ARGSUSED */
+static void
+echo_command (text, from_tty)
+     char *text;
+     int from_tty;
+{
+  char *p = text;
+  register int c;
+
+  if (text)
+    while ((c = *p++) != '\0')
+      {
+	if (c == '\\')
+	  {
+	    /* \ at end of argument is used after spaces
+	       so they won't be lost.  */
+	    if (*p == 0)
+	      return;
+
+	    c = parse_escape (&p);
+	    if (c >= 0)
+	      printf_filtered ("%c", c);
+	  }
+	else
+	  printf_filtered ("%c", c);
+      }
+
+  /* Force this output to appear now.  */
+  wrap_here ("");
+  gdb_flush (gdb_stdout);
+}
+
+
+/* Functions to manipulate command line editing control variables.  */
+
+/* Number of commands to print in each call to show_commands.  */
+#define Hist_print 10
+static void
+show_commands (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  /* Index for history commands.  Relative to history_base.  */
+  int offset;
+
+  /* Number of the history entry which we are planning to display next.
+     Relative to history_base.  */
+  static int num = 0;
+
+  /* The first command in the history which doesn't exist (i.e. one more
+     than the number of the last command).  Relative to history_base.  */
+  int hist_len;
+
+  extern HIST_ENTRY *history_get PARAMS ((int));
+
+  /* Print out some of the commands from the command history.  */
+  /* First determine the length of the history list.  */
+  hist_len = history_size;
+  for (offset = 0; offset < history_size; offset++)
+    {
+      if (!history_get (history_base + offset))
+	{
+	  hist_len = offset;
+	  break;
+	}
+    }
+
+  if (args)
+    {
+      if (args[0] == '+' && args[1] == '\0')
+	/* "info editing +" should print from the stored position.  */
+	;
+      else
+	/* "info editing <exp>" should print around command number <exp>.  */
+	num = (parse_and_eval_address (args) - history_base) - Hist_print / 2;
+    }
+  /* "show commands" means print the last Hist_print commands.  */
+  else
+    {
+      num = hist_len - Hist_print;
+    }
+
+  if (num < 0)
+    num = 0;
+
+  /* If there are at least Hist_print commands, we want to display the last
+     Hist_print rather than, say, the last 6.  */
+  if (hist_len - num < Hist_print)
+    {
+      num = hist_len - Hist_print;
+      if (num < 0)
+	num = 0;
+    }
+
+  for (offset = num; offset < num + Hist_print && offset < hist_len; offset++)
+    {
+      printf_filtered ("%5d  %s\n", history_base + offset,
+	      (history_get (history_base + offset))->line);
+    }
+
+  /* The next command we want to display is the next one that we haven't
+     displayed yet.  */
+  num += Hist_print;
+  
+  /* If the user repeats this command with return, it should do what
+     "show commands +" does.  This is unnecessary if arg is null,
+     because "show commands +" is not useful after "show commands".  */
+  if (from_tty && args)
+    {
+      args[0] = '+';
+      args[1] = '\0';
+    }
+}
+
+/* Called by do_setshow_command.  */
+/* ARGSUSED */
+static void
+set_history_size_command (args, from_tty, c)
+     char *args;
+     int from_tty;
+     struct cmd_list_element *c;
+{
+  if (history_size == INT_MAX)
+    unstifle_history ();
+  else if (history_size >= 0)
+    stifle_history (history_size);
+  else
+    {
+      history_size = INT_MAX;
+      error ("History size must be non-negative");
+    }
+}
+
+/* ARGSUSED */
+static void
+set_history (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  printf_unfiltered ("\"set history\" must be followed by the name of a history subcommand.\n");
+  help_list (sethistlist, "set history ", -1, gdb_stdout);
+}
+
+/* ARGSUSED */
+static void
+show_history (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  cmd_show_list (showhistlist, from_tty, "");
+}
+
+int info_verbose = 0;		/* Default verbose msgs off */
+
+/* Called by do_setshow_command.  An elaborate joke.  */
+/* ARGSUSED */
+static void 
+set_verbose (args, from_tty, c)
+     char *args;
+     int from_tty;
+     struct cmd_list_element *c;
+{
+  char *cmdname = "verbose";
+  struct cmd_list_element *showcmd;
+  
+  showcmd = lookup_cmd_1 (&cmdname, showlist, NULL, 1);
+
+  if (info_verbose)
+    {
+      c->doc = "Set verbose printing of informational messages.";
+      showcmd->doc = "Show verbose printing of informational messages.";
+    }
+  else
+    {
+      c->doc = "Set verbosity.";
+      showcmd->doc = "Show verbosity.";
+    }
+}
+
+static void
+float_handler (signo)
+int signo;
+{
+  /* This message is based on ANSI C, section 4.7.  Note that integer
+     divide by zero causes this, so "float" is a misnomer.  */
+  signal (SIGFPE, float_handler);
+  error ("Erroneous arithmetic operation.");
+}
+
+/* Return whether we are running a batch file or from terminal.  */
+int
+batch_mode ()
+{
+  return !(instream == stdin && ISATTY (stdin));
+}
+
+
+static void
+init_cmd_lists ()
+{
+  cmdlist = NULL;
+  infolist = NULL;
+  enablelist = NULL;
+  disablelist = NULL;
+  deletelist = NULL;
+  enablebreaklist = NULL;
+  setlist = NULL;
+  unsetlist = NULL;
+  showlist = NULL;
+  sethistlist = NULL;
+  showhistlist = NULL;
+  unsethistlist = NULL;
+#if MAINTENANCE_CMDS
+  maintenancelist = NULL;
+  maintenanceinfolist = NULL;
+  maintenanceprintlist = NULL;
+#endif
+  setprintlist = NULL;
+  showprintlist = NULL;
+  setchecklist = NULL;
+  showchecklist = NULL;
+}
+
+/* Init the history buffer.  Note that we are called after the init file(s)
+ * have been read so that the user can change the history file via his
+ * .gdbinit file (for instance).  The GDBHISTFILE environment variable
+ * overrides all of this.
+ */
+
+void
+init_history()
+{
+  char *tmpenv;
+
+  tmpenv = getenv ("HISTSIZE");
+  if (tmpenv)
+    history_size = atoi (tmpenv);
+  else if (!history_size)
+    history_size = 256;
+
+  stifle_history (history_size);
+
+  tmpenv = getenv ("GDBHISTFILE");
+  if (tmpenv)
+    history_filename = savestring (tmpenv, strlen(tmpenv));
+  else if (!history_filename) {
+    /* We include the current directory so that if the user changes
+       directories the file written will be the same as the one
+       that was read.  */
+    history_filename = concat (current_directory, "/.gdb_history", NULL);
+  }
+  read_history (history_filename);
+}
+
+static void
+init_main ()
+{
+  struct cmd_list_element *c;
+  
+#ifdef DEFAULT_PROMPT
+  prompt = savestring (DEFAULT_PROMPT, strlen(DEFAULT_PROMPT));
+#else
+  prompt = savestring ("(gdb) ", 6);
+#endif
+
+  /* Set the important stuff up for command editing.  */
+  command_editing_p = 1;
+  history_expansion_p = 0;
+  write_history_p = 0;
+  
+  /* Setup important stuff for command line editing.  */
+  rl_completion_entry_function = (int (*)()) symbol_completion_function;
+  rl_completer_word_break_characters = gdb_completer_word_break_characters;
+  rl_completer_quote_characters = gdb_completer_quote_characters;
+  rl_readline_name = "gdb";
+
+  /* Define the classes of commands.
+     They will appear in the help list in the reverse of this order.  */
+
+  add_cmd ("internals", class_maintenance, NO_FUNCTION,
+	   "Maintenance commands.\n\
+Some gdb commands are provided just for use by gdb maintainers.\n\
+These commands are subject to frequent change, and may not be as\n\
+well documented as user commands.",
+	   &cmdlist);
+  add_cmd ("obscure", class_obscure, NO_FUNCTION, "Obscure features.", &cmdlist);
+  add_cmd ("aliases", class_alias, NO_FUNCTION, "Aliases of other commands.", &cmdlist);
+  add_cmd ("user-defined", class_user, NO_FUNCTION, "User-defined commands.\n\
+The commands in this class are those defined by the user.\n\
+Use the \"define\" command to define a command.", &cmdlist);
+  add_cmd ("support", class_support, NO_FUNCTION, "Support facilities.", &cmdlist);
+  add_cmd ("status", class_info, NO_FUNCTION, "Status inquiries.", &cmdlist);
+  add_cmd ("files", class_files, NO_FUNCTION, "Specifying and examining files.", &cmdlist);
+  add_cmd ("breakpoints", class_breakpoint, NO_FUNCTION, "Making program stop at certain points.", &cmdlist);
+  add_cmd ("data", class_vars, NO_FUNCTION, "Examining data.", &cmdlist);
+  add_cmd ("stack", class_stack, NO_FUNCTION, "Examining the stack.\n\
+The stack is made up of stack frames.  Gdb assigns numbers to stack frames\n\
+counting from zero for the innermost (currently executing) frame.\n\n\
+At any time gdb identifies one frame as the \"selected\" frame.\n\
+Variable lookups are done with respect to the selected frame.\n\
+When the program being debugged stops, gdb selects the innermost frame.\n\
+The commands below can be used to select other frames by number or address.",
+	   &cmdlist);
+  add_cmd ("running", class_run, NO_FUNCTION, "Running the program.", &cmdlist);
+
+  add_com ("pwd", class_files, pwd_command,
+	   "Print working directory.  This is used for your program as well.");
+  c = add_cmd ("cd", class_files, cd_command,
+	   "Set working directory to DIR for debugger and program being debugged.\n\
+The change does not take effect for the program being debugged\n\
+until the next time it is started.", &cmdlist);
+  c->completer = filename_completer;
+
+  add_show_from_set
+    (add_set_cmd ("prompt", class_support, var_string, (char *)&prompt,
+	   "Set gdb's prompt",
+	   &setlist),
+     &showlist);
+  
+  add_com ("echo", class_support, echo_command,
+	   "Print a constant string.  Give string as argument.\n\
+C escape sequences may be used in the argument.\n\
+No newline is added at the end of the argument;\n\
+use \"\\n\" if you want a newline to be printed.\n\
+Since leading and trailing whitespace are ignored in command arguments,\n\
+if you want to print some you must use \"\\\" before leading whitespace\n\
+to be printed or after trailing whitespace.");
+  add_com ("document", class_support, document_command,
+	   "Document a user-defined command.\n\
+Give command name as argument.  Give documentation on following lines.\n\
+End with a line of just \"end\".");
+  add_com ("define", class_support, define_command,
+	   "Define a new command name.  Command name is argument.\n\
+Definition appears on following lines, one command per line.\n\
+End with a line of just \"end\".\n\
+Use the \"document\" command to give documentation for the new command.\n\
+Commands defined in this way do not take arguments.");
+
+#ifdef __STDC__
+  c = add_cmd ("source", class_support, source_command,
+	   "Read commands from a file named FILE.\n\
+Note that the file \"" GDBINIT_FILENAME "\" is read automatically in this way\n\
+when gdb is started.", &cmdlist);
+#else
+  /* Punt file name, we can't help it easily.  */
+  c = add_cmd ("source", class_support, source_command,
+	   "Read commands from a file named FILE.\n\
+Note that the file \".gdbinit\" is read automatically in this way\n\
+when gdb is started.", &cmdlist);
+#endif
+  c->completer = filename_completer;
+
+  add_com ("quit", class_support, quit_command, "Exit gdb.");
+  add_com ("help", class_support, help_command, "Print list of commands.");
+  add_com_alias ("q", "quit", class_support, 1);
+  add_com_alias ("h", "help", class_support, 1);
+
+
+  c = add_set_cmd ("verbose", class_support, var_boolean, (char *)&info_verbose,
+		   "Set ",
+		   &setlist),
+  add_show_from_set (c, &showlist);
+  c->function.sfunc = set_verbose;
+  set_verbose (NULL, 0, c);
+  
+  add_show_from_set
+    (add_set_cmd ("editing", class_support, var_boolean, (char *)&command_editing_p,
+	   "Set editing of command lines as they are typed.\n\
+Use \"on\" to enable to enable the editing, and \"off\" to disable it.\n\
+Without an argument, command line editing is enabled.  To edit, use\n\
+EMACS-like or VI-like commands like control-P or ESC.", &setlist),
+     &showlist);
+
+  add_prefix_cmd ("history", class_support, set_history,
+		  "Generic command for setting command history parameters.",
+		  &sethistlist, "set history ", 0, &setlist);
+  add_prefix_cmd ("history", class_support, show_history,
+		  "Generic command for showing command history parameters.",
+		  &showhistlist, "show history ", 0, &showlist);
+
+  add_show_from_set
+    (add_set_cmd ("expansion", no_class, var_boolean, (char *)&history_expansion_p,
+	   "Set history expansion on command input.\n\
+Without an argument, history expansion is enabled.", &sethistlist),
+     &showhistlist);
+
+  add_show_from_set
+    (add_set_cmd ("save", no_class, var_boolean, (char *)&write_history_p,
+	   "Set saving of the history record on exit.\n\
+Use \"on\" to enable to enable the saving, and \"off\" to disable it.\n\
+Without an argument, saving is enabled.", &sethistlist),
+     &showhistlist);
+
+  c = add_set_cmd ("size", no_class, var_integer, (char *)&history_size,
+		   "Set the size of the command history, \n\
+ie. the number of previous commands to keep a record of.", &sethistlist);
+  add_show_from_set (c, &showhistlist);
+  c->function.sfunc = set_history_size_command;
+
+  add_show_from_set
+    (add_set_cmd ("filename", no_class, var_filename, (char *)&history_filename,
+	   "Set the filename in which to record the command history\n\
+ (the list of previous commands of which a record is kept).", &sethistlist),
+     &showhistlist);
+
+  add_show_from_set
+    (add_set_cmd ("confirm", class_support, var_boolean,
+		  (char *)&caution,
+		  "Set whether to confirm potentially dangerous operations.",
+		  &setlist),
+     &showlist);
+
+  add_prefix_cmd ("info", class_info, info_command,
+        "Generic command for showing things about the program being debugged.",
+		  &infolist, "info ", 0, &cmdlist);
+  add_com_alias ("i", "info", class_info, 1);
+
+  add_com ("complete", class_obscure, complete_command,
+	   "List the completions for the rest of the line as a command.");
+
+  add_prefix_cmd ("show", class_info, show_command,
+		  "Generic command for showing things about the debugger.",
+		  &showlist, "show ", 0, &cmdlist);
+  /* Another way to get at the same thing.  */
+  add_info ("set", show_command, "Show all GDB settings.");
+
+  add_cmd ("commands", no_class, show_commands,
+	   "Show the the history of commands you typed.\n\
+You can supply a command number to start with, or a `+' to start after\n\
+the previous command number shown.",
+	   &showlist);
+
+  add_cmd ("version", no_class, show_version,
+	   "Show what version of GDB this is.", &showlist);
+
+  /* If target is open when baud changes, it doesn't take effect until the
+     next open (I think, not sure).  */
+  add_show_from_set (add_set_cmd ("remotebaud", no_class,
+				  var_zinteger, (char *)&baud_rate,
+				  "Set baud rate for remote serial I/O.\n\
+This value is used to set the speed of the serial port when debugging\n\
+using remote targets.", &setlist),
+		     &showlist);
+
+  add_show_from_set (
+    add_set_cmd ("remotedebug", no_class, var_zinteger, (char *)&remote_debug,
+		   "Set debugging of remote protocol.\n\
+When enabled, each packet sent or received with the remote target\n\
+is displayed.", &setlist),
+		     &showlist);
+}
diff --git a/gdb/top.h b/gdb/top.h
new file mode 100644
index 0000000..5a50820
--- /dev/null
+++ b/gdb/top.h
@@ -0,0 +1,48 @@
+/* Top level stuff for GDB, the GNU debugger.
+   Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+/* From top.c.  */
+extern char *line;
+extern int linesize;
+extern FILE *instream;
+extern char dirbuf[1024];
+extern int inhibit_gdbinit;
+extern int epoch_interface;
+extern char gdbinit[];
+
+/* Generally one should use catch_errors rather than manipulating these
+   directly.  The exception is main().  */
+extern jmp_buf error_return;
+extern jmp_buf quit_return;
+
+extern void print_gdb_version PARAMS ((GDB_FILE *));
+extern void print_gnu_advertisement PARAMS ((void));
+
+extern void source_command PARAMS ((char *, int));
+extern void cd_command PARAMS ((char *, int));
+extern void read_command_file PARAMS ((FILE *));
+extern void init_history PARAMS ((void));
+extern void command_loop PARAMS ((void));
+extern void quit_command PARAMS ((char *, int));
+
+/* From random places.  */
+extern int mapped_symbol_files;
+extern int readnow_symbol_files;
+#define	ALL_CLEANUPS	((struct cleanup *)0)