Fix toplevel config.status for HP-UX sed.

/:
	* configure.ac: Do not use $extrasub for replacing @if/@endif
	parts in Makefile; instead, use additional arguments to
	AC_CONFIG_COMMANDS to do the replacement manually, with several
	sed invocations, to avoid HP-UX sed command limits.
	* configure: Regenerate.

3 files changed, 62 insertions, 21 deletions

diff --git a/ChangeLog b/ChangeLog
index d971a37..6565198 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,11 @@
+2009-09-08  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* configure.ac: Do not use $extrasub for replacing @if/@endif
+	parts in Makefile; instead, use additional arguments to
+	AC_CONFIG_COMMANDS to do the replacement manually, with several
+	sed invocations, to avoid HP-UX sed command limits.
+	* configure: Regenerate.
+
 2009-09-04  Alexandre Oliva  <aoliva@redhat.com>
 
 	* configure.ac (with-build-config): Document.  Handle without.
diff --git a/configure b/configure
index 3b6cd2d..aa1662c 100755
--- a/configure
+++ b/configure
@@ -6519,12 +6519,13 @@ INSTALL_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-install-/g`
 # configuration, so that the top-level Makefile reconfigures them,
 # like we used to do when configure itself was recursive.
 
-# Loop over modules.  $extrasub must be used with care, limiting as
-# much as possible the usage of range addresses.  That's because autoconf
-# splits the sed script to overcome limits in the number of commands,
-# and relying on carefully-timed sed passes may turn out to be very hard
-# to maintain later.  In this particular case, you just have to be careful
-# not to nest @if/@endif pairs, because configure will not warn you at all.
+# Loop over modules.  We used to use the "$extrasub" feature from Autoconf
+# but now we're fixing up the Makefile ourselves with the additional
+# commands passed to AC_CONFIG_FILES.  Use separate variables
+# extrasub-{build,host,target} not because there is any reason to split
+# the substitutions up that way, but only to remain below the limit of
+# 99 commands in a script, for HP-UX sed.
+# Do not nest @if/@endif pairs, because configure will not warn you at all.
 
 # Check whether --enable-bootstrap was given.
 if test "${enable_bootstrap+set}" = set; then :
@@ -6620,18 +6621,20 @@ fi
 $as_echo "$BUILD_CONFIG" >&6; }
 
 
+extrasub_build=
 for module in ${build_configdirs} ; do
   if test -z "${no_recursion}" \
      && test -f ${build_subdir}/${module}/Makefile; then
     echo 1>&2 "*** removing ${build_subdir}/${module}/Makefile to force reconfigure"
     rm -f ${build_subdir}/${module}/Makefile
   fi
-  extrasub="$extrasub
+  extrasub_build="$extrasub_build
 /^@if build-$module\$/d
 /^@endif build-$module\$/d
 /^@if build-$module-$bootstrap_suffix\$/d
 /^@endif build-$module-$bootstrap_suffix\$/d"
 done
+extrasub_host=
 for module in ${configdirs} ; do
   if test -z "${no_recursion}"; then
     for file in stage*-${module}/Makefile prev-${module}/Makefile ${module}/Makefile; do
@@ -6641,12 +6644,13 @@ for module in ${configdirs} ; do
       fi
     done
   fi
-  extrasub="$extrasub
+  extrasub_host="$extrasub_host
 /^@if $module\$/d
 /^@endif $module\$/d
 /^@if $module-$bootstrap_suffix\$/d
 /^@endif $module-$bootstrap_suffix\$/d"
 done
+extrasub_target=
 for module in ${target_configdirs} ; do
   if test -z "${no_recursion}" \
      && test -f ${target_subdir}/${module}/Makefile; then
@@ -6660,14 +6664,15 @@ for module in ${target_configdirs} ; do
     *) target_bootstrap_suffix=no-bootstrap ;;
   esac
 
-  extrasub="$extrasub
+  extrasub_target="$extrasub_target
 /^@if target-$module\$/d
 /^@endif target-$module\$/d
 /^@if target-$module-$target_bootstrap_suffix\$/d
 /^@endif target-$module-$target_bootstrap_suffix\$/d"
 done
 
-extrasub="$extrasub
+# Do the final fixup along with target modules.
+extrasub_target="$extrasub_target
 /^@if /,/^@endif /d"
 
 # Create the serialization dependencies.  This uses a temporary file.
@@ -14036,6 +14041,13 @@ _ASBOX
 
 _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+extrasub_build="$extrasub_build"
+   extrasub_host="$extrasub_host"
+   extrasub_target="$extrasub_target"
+
 _ACEOF
 
 cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
@@ -14491,6 +14503,14 @@ which seems to be undefined.  Please make sure it is defined." >&2;}
 
   esac
 
+
+  case $ac_file$ac_mode in
+    "Makefile":F) sed "$extrasub_build" Makefile |
+   sed "$extrasub_host" |
+   sed "$extrasub_target" > mf$$
+   mv -f mf$$ Makefile ;;
+
+  esac
 done # for ac_tag
 
 
diff --git a/configure.ac b/configure.ac
index 592a8e3..a85c3bd 100644
--- a/configure.ac
+++ b/configure.ac
@@ -2410,12 +2410,13 @@ INSTALL_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-install-/g`
 # configuration, so that the top-level Makefile reconfigures them,
 # like we used to do when configure itself was recursive.
 
-# Loop over modules.  $extrasub must be used with care, limiting as
-# much as possible the usage of range addresses.  That's because autoconf
-# splits the sed script to overcome limits in the number of commands,
-# and relying on carefully-timed sed passes may turn out to be very hard
-# to maintain later.  In this particular case, you just have to be careful
-# not to nest @if/@endif pairs, because configure will not warn you at all.
+# Loop over modules.  We used to use the "$extrasub" feature from Autoconf
+# but now we're fixing up the Makefile ourselves with the additional
+# commands passed to AC_CONFIG_FILES.  Use separate variables
+# extrasub-{build,host,target} not because there is any reason to split
+# the substitutions up that way, but only to remain below the limit of
+# 99 commands in a script, for HP-UX sed.
+# Do not nest @if/@endif pairs, because configure will not warn you at all.
 
 AC_ARG_ENABLE([bootstrap],
 [  --enable-bootstrap      enable bootstrapping @<:@yes if native build@:>@],,
@@ -2502,18 +2503,20 @@ fi
 AC_MSG_RESULT($BUILD_CONFIG)
 AC_SUBST(BUILD_CONFIG)
 
+extrasub_build=
 for module in ${build_configdirs} ; do
   if test -z "${no_recursion}" \
      && test -f ${build_subdir}/${module}/Makefile; then
     echo 1>&2 "*** removing ${build_subdir}/${module}/Makefile to force reconfigure"
     rm -f ${build_subdir}/${module}/Makefile
   fi
-  extrasub="$extrasub
+  extrasub_build="$extrasub_build
 /^@if build-$module\$/d
 /^@endif build-$module\$/d
 /^@if build-$module-$bootstrap_suffix\$/d
 /^@endif build-$module-$bootstrap_suffix\$/d"
 done
+extrasub_host=
 for module in ${configdirs} ; do
   if test -z "${no_recursion}"; then
     for file in stage*-${module}/Makefile prev-${module}/Makefile ${module}/Makefile; do
@@ -2523,12 +2526,13 @@ for module in ${configdirs} ; do
       fi
     done
   fi
-  extrasub="$extrasub
+  extrasub_host="$extrasub_host
 /^@if $module\$/d
 /^@endif $module\$/d
 /^@if $module-$bootstrap_suffix\$/d
 /^@endif $module-$bootstrap_suffix\$/d"
 done
+extrasub_target=
 for module in ${target_configdirs} ; do
   if test -z "${no_recursion}" \
      && test -f ${target_subdir}/${module}/Makefile; then
@@ -2542,14 +2546,15 @@ for module in ${target_configdirs} ; do
     *) target_bootstrap_suffix=no-bootstrap ;;
   esac
 
-  extrasub="$extrasub
+  extrasub_target="$extrasub_target
 /^@if target-$module\$/d
 /^@endif target-$module\$/d
 /^@if target-$module-$target_bootstrap_suffix\$/d
 /^@endif target-$module-$target_bootstrap_suffix\$/d"
 done
 
-extrasub="$extrasub
+# Do the final fixup along with target modules.
+extrasub_target="$extrasub_target
 /^@if /,/^@endif /d"
 
 # Create the serialization dependencies.  This uses a temporary file.
@@ -3167,4 +3172,12 @@ case "$target" in
 esac
 AC_SUBST(compare_exclusions)
 
-AC_OUTPUT(Makefile)
+AC_CONFIG_FILES([Makefile],
+  [sed "$extrasub_build" Makefile |
+   sed "$extrasub_host" |
+   sed "$extrasub_target" > mf$$
+   mv -f mf$$ Makefile],
+  [extrasub_build="$extrasub_build"
+   extrasub_host="$extrasub_host"
+   extrasub_target="$extrasub_target"])
+AC_OUTPUT