rebuild with current tools

27 files changed, 6042 insertions, 7604 deletions

diff --git a/bfd/Makefile.in b/bfd/Makefile.in
index 73315b4..59aebe1 100644
--- a/bfd/Makefile.in
+++ b/bfd/Makefile.in
@@ -89,14 +89,13 @@ INSTOBJEXT = @INSTOBJEXT@
 INTLDEPS = @INTLDEPS@
 INTLLIBS = @INTLLIBS@
 INTLOBJS = @INTLOBJS@
-LD = @LD@
 LIBTOOL = @LIBTOOL@
 LN_S = @LN_S@
 MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
 MKINSTALLDIRS = @MKINSTALLDIRS@
 MSGFMT = @MSGFMT@
-NM = @NM@
+OBJDUMP = @OBJDUMP@
 PACKAGE = @PACKAGE@
 POFILES = @POFILES@
 POSUB = @POSUB@
@@ -104,7 +103,6 @@ RANLIB = @RANLIB@
 TDEFINES = @TDEFINES@
 USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
 USE_NLS = @USE_NLS@
-USE_SYMBOL_UNDERSCORE = @USE_SYMBOL_UNDERSCORE@
 VERSION = @VERSION@
 WIN32LDFLAGS = @WIN32LDFLAGS@
 WIN32LIBADD = @WIN32LIBADD@
diff --git a/bfd/aclocal.m4 b/bfd/aclocal.m4
index 13aef7c..ca9d432 100644
--- a/bfd/aclocal.m4
+++ b/bfd/aclocal.m4
@@ -211,7 +211,7 @@ fi
 AC_SUBST($1)])
 
 
-# serial 35 AC_PROG_LIBTOOL
+# serial 40 AC_PROG_LIBTOOL
 AC_DEFUN(AC_PROG_LIBTOOL,
 [AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
 
@@ -220,10 +220,11 @@ AC_CACHE_SAVE
 
 # Actually configure libtool.  ac_aux_dir is where install-sh is found.
 CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
-DLLTOOL="$DLLTOOL" AS="$AS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
 ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
 || AC_MSG_ERROR([libtool configure failed])
 
 # Reload cache, that may have been modified by ltconfig
@@ -252,24 +253,33 @@ AC_REQUIRE([AC_PROG_RANLIB])dnl
 AC_REQUIRE([AC_PROG_CC])dnl
 AC_REQUIRE([AC_PROG_LD])dnl
 AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_SYS_NM_PARSE])dnl
-AC_REQUIRE([AC_SYS_SYMBOL_UNDERSCORE])dnl
 AC_REQUIRE([AC_PROG_LN_S])dnl
 dnl
 
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
+
 # Check for any special flags to pass to ltconfig.
 libtool_flags="--cache-file=$cache_file"
 test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
 test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
 test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
 test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
 test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
+[libtool_flags="$libtool_flags --enable-dlopen"])
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[libtool_flags="$libtool_flags --enable-win32-dll"])
+AC_ARG_ENABLE(libtool-lock,
+  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
 
 # Some flags need to be propagated to the compiler or linker for good
 # libtool support.
-case "$host" in
+case "$lt_target" in
 *-*-irix6*)
   # Find out which ABI we are using.
   echo '[#]line __oline__ "configure"' > conftest.$ac_ext
@@ -301,33 +311,28 @@ case "$host" in
   fi
   ;;
 
-*-*-cygwin*)
-  AC_SYS_LIBTOOL_CYGWIN
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw*)
+  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+  AC_CHECK_TOOL(AS, as, false)
+  AC_CHECK_TOOL(OBJDUMP, objdump, false)
   ;;
-
+])
 esac
-
-# enable the --disable-libtool-lock switch
-
-AC_ARG_ENABLE(libtool-lock,
-[  --disable-libtool-lock  force libtool not to do file locking],
-need_locks=$enableval,
-need_locks=yes)
-
-if test x"$need_locks" = xno; then
-  libtool_flags="$libtool_flags --disable-lock"
-fi
 ])
 
-# AC_LIBTOOL_DLOPEN - check for dlopen support
-AC_DEFUN(AC_LIBTOOL_DLOPEN, [lt_dlopen=yes])
+# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
+AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
+
+# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
+AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
 
 # AC_ENABLE_SHARED - implement the --enable-shared flag
 # Usage: AC_ENABLE_SHARED[(DEFAULT)]
 #   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
 #   `yes'.
-AC_DEFUN(AC_ENABLE_SHARED,
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_SHARED, [dnl
+define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
 AC_ARG_ENABLE(shared,
 changequote(<<, >>)dnl
 <<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
@@ -352,15 +357,15 @@ enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
 ])
 
 # AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN(AC_DISABLE_SHARED,
-[AC_ENABLE_SHARED(no)])
+AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)])
 
 # AC_ENABLE_STATIC - implement the --enable-static flag
 # Usage: AC_ENABLE_STATIC[(DEFAULT)]
 #   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
 #   `yes'.
-AC_DEFUN(AC_ENABLE_STATIC,
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_STATIC, [dnl
+define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
 AC_ARG_ENABLE(static,
 changequote(<<, >>)dnl
 <<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
@@ -385,16 +390,16 @@ enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
 ])
 
 # AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN(AC_DISABLE_STATIC,
-[AC_ENABLE_STATIC(no)])
+AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)])
 
 
 # AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
 # Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
 #   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
 #   `yes'.
-AC_DEFUN(AC_ENABLE_FAST_INSTALL,
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
+define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
 AC_ARG_ENABLE(fast-install,
 changequote(<<, >>)dnl
 <<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
@@ -419,9 +424,8 @@ enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
 ])
 
 # AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN(AC_DISABLE_FAST_INSTALL,
-[AC_ENABLE_FAST_INSTALL(no)])
-
+AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)])
 
 # AC_PROG_LD - find the path to the GNU or non-GNU linker
 AC_DEFUN(AC_PROG_LD,
@@ -439,7 +443,7 @@ if test "$ac_cv_prog_gcc" = yes; then
   case "$ac_prog" in
     # Accept absolute paths.
 changequote(,)dnl
-    /* | [A-Za-z]:[\\/]*)
+    [\\/]* | [A-Za-z]:[\\/]*)
       re_direlt='/[^/][^/]*/\.\./'
 changequote([,])dnl
       # Canonicalize the path of ld
@@ -465,10 +469,10 @@ else
 fi
 AC_CACHE_VAL(ac_cv_path_LD,
 [if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
   for ac_dir in $PATH; do
     test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog"; then
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
       ac_cv_path_LD="$ac_dir/$ac_prog"
       # Check to see if the program is GNU ld.  I'd rather use --version,
       # but apparently some GNU ld's only accept -v.
@@ -491,7 +495,6 @@ else
   AC_MSG_RESULT(no)
 fi
 test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_SUBST(LD)
 AC_PROG_LD_GNU
 ])
 
@@ -513,10 +516,10 @@ AC_CACHE_VAL(ac_cv_path_NM,
   # Let the user override the test.
   ac_cv_path_NM="$NM"
 else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
   for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
     test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/nm; then
+    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
       # Check to see if the nm accepts a BSD-compat flag.
       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
       #   nm: unknown option "B" ignored
@@ -537,230 +540,24 @@ else
 fi])
 NM="$ac_cv_path_NM"
 AC_MSG_RESULT([$NM])
-AC_SUBST(NM)
 ])
 
-# AC_SYS_NM_PARSE - Check for command to grab the raw symbol name followed
-# by C symbol name from nm.
-AC_DEFUN(AC_SYS_NM_PARSE,
+# AC_CHECK_LIBM - check for math library
+AC_DEFUN(AC_CHECK_LIBM,
 [AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output])
-AC_CACHE_VAL(ac_cv_sys_global_symbol_pipe,
-[# These are sane defaults that work on at least a few old systems.
-# {They come from Ultrix.  What could be older than Ultrix?!! ;)}
-
-changequote(,)dnl
-# Character class describing NM global symbol codes.
-ac_symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-ac_symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-# Define system-specific variables.
-case "$host_os" in
-aix*)
-  ac_symcode='[BCDT]'
+LIBM=
+case "$lt_target" in
+*-*-beos* | *-*-cygwin*)
+  # These system don't have libm
   ;;
-cygwin* | mingw*)
-  ac_symcode='[ABCDGISTW]'
+*-ncr-sysv4.3*)
+  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
   ;;
-hpux*)
-  ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
-  ;;
-irix*)
-  ac_symcode='[BCDEGRST]'
-  ;;
-solaris*)
-  ac_symcode='[BDT]'
+*)
+  AC_CHECK_LIB(m, main, LIBM="-lm")
   ;;
 esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
-  ac_symcode='[ABCDGISTW]'
-fi
-changequote([,])dnl
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
-  ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ 	]\($ac_symcode\)[ 	][ 	]*\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'"
-
-  # Check to see that the pipe works correctly.
-  ac_pipe_works=no
-  rm -f conftest.$ac_ext
-  cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func;return 0;}
-EOF
-
-  if AC_TRY_EVAL(ac_compile); then
-    # Now try to grab the symbols.
-    ac_nlist=conftest.nm
-  
-    if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
-
-      # Try sorting and uniquifying the output.
-      if sort "$ac_nlist" | uniq > "$ac_nlist"T; then
-	mv -f "$ac_nlist"T "$ac_nlist"
-      else
-	rm -f "$ac_nlist"T
-      fi
-
-      # Make sure that we snagged all the symbols we need.
-      if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then
-	if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then
-	  cat <<EOF > conftest.c
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
-	  # Now generate the symbol file.
-	  eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c'
-
-	  cat <<EOF >> conftest.c
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
-  const char *name;
-  lt_ptr_t address;
-}
-changequote(,)dnl
-lt_preloaded_symbols[] =
-changequote([,])dnl
-{
-EOF
-	sed 's/^. \(.*\) \(.*\)$/  {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c
-	cat <<\EOF >> conftest.c
-  {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
-	  # Now try linking the two files.
-	  mv conftest.$ac_objext conftestm.$ac_objext
-	  ac_save_LIBS="$LIBS"
-	  ac_save_CFLAGS="$CFLAGS"
-	  LIBS="conftestm.$ac_objext"
-	  CFLAGS="$CFLAGS$no_builtin_flag"
-	  if AC_TRY_EVAL(ac_link) && test -s conftest; then
-	    ac_pipe_works=yes
-	  else
-	    echo "configure: failed program was:" >&AC_FD_CC
-	    cat conftest.c >&AC_FD_CC
-	  fi
-	  LIBS="$ac_save_LIBS"
-	  CFLAGS="$ac_save_CFLAGS"
-	else
-	  echo "cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
-	fi
-      else
-	echo "cannot find nm_test_var in $ac_nlist" >&AC_FD_CC
-      fi
-    else
-      echo "cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
-    fi
-  else
-    echo "$progname: failed program was:" >&AC_FD_CC
-    cat conftest.c >&AC_FD_CC
-  fi
-  rm -rf conftest*
-
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$ac_pipe_works" = yes; then
-    if test x"$ac_symprfx" = x"_"; then
-      ac_cv_sys_symbol_underscore=yes
-    else
-      ac_cv_sys_symbol_underscore=no
-    fi
-    break
-  else
-    ac_cv_sys_global_symbol_pipe=
-  fi
-done
-])
-
-ac_result=yes
-if test -z "$ac_cv_sys_global_symbol_pipe"; then
-   ac_result=no
-fi
-AC_MSG_RESULT($ac_result)
-])
-
-# AC_SYS_LIBTOOL_CYGWIN - find tools needed on cygwin
-AC_DEFUN(AC_SYS_LIBTOOL_CYGWIN,
-[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-AC_CHECK_TOOL(AS, as, false)
-])
-
-# AC_SYS_SYMBOL_UNDERSCORE - does the compiler prefix global symbols
-#                            with an underscore?
-AC_DEFUN(AC_SYS_SYMBOL_UNDERSCORE,
-[AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_SYS_NM_PARSE])dnl
-AC_MSG_CHECKING([for _ prefix in compiled symbols])
-AC_CACHE_VAL(ac_cv_sys_symbol_underscore,
-[ac_cv_sys_symbol_underscore=no
-cat > conftest.$ac_ext <<EOF
-void nm_test_func(){}
-int main(){nm_test_func;return 0;}
-EOF
-if AC_TRY_EVAL(ac_compile); then
-  # Now try to grab the symbols.
-  ac_nlist=conftest.nm
-  if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
-    # See whether the symbols have a leading underscore.
-    if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
-      ac_cv_sys_symbol_underscore=yes
-    else
-      if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
-	:
-      else
-	echo "configure: cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
-      fi
-    fi
-  else
-    echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
-  fi
-else
-  echo "configure: failed program was:" >&AC_FD_CC
-  cat conftest.c >&AC_FD_CC
-fi
-rm -rf conftest*
-])
-AC_MSG_RESULT($ac_cv_sys_symbol_underscore)
-USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no}
-AC_SUBST(USE_SYMBOL_UNDERSCORE)dnl
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN(AC_CHECK_LIBM, [
-AC_CHECK_LIB(mw, _mwvalidcheckl)
-AC_CHECK_LIB(m, cos)
 ])
 
 # AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
@@ -771,13 +568,14 @@ AC_CHECK_LIB(m, cos)
 # '${top_builddir}/' (note the single quotes!) if your package is not
 # flat, and, if you're not using automake, define top_builddir as
 # appropriate in the Makefiles.
-AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [
+AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
   case "$enable_ltdl_convenience" in
   no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
   "") enable_ltdl_convenience=yes
       ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
   esac
   LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
+  INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
 ])
 
 # AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
@@ -789,16 +587,23 @@ AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [
 # flat, and, if you're not using automake, define top_builddir as
 # appropriate in the Makefiles.
 # In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [
-  AC_CHECK_LIB(ltdl, main, LIBLTDL="-lltdl", [
-    case "$enable_ltdl_install" in
-    no) AC_MSG_WARN([libltdl not installed, but installation disabled]) ;;
-    "") enable_ltdl_install=yes
-        ac_configure_args="$ac_configure_args --enable-ltdl-install" ;;
-    esac
+AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+  AC_CHECK_LIB(ltdl, main,
+  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+  [if test x"$enable_ltdl_install" = xno; then
+     AC_MSG_WARN([libltdl not installed, but installation disabled])
+   else
+     enable_ltdl_install=yes
+   fi
   ])
-  if test x"$enable_ltdl_install" != x"no"; then
+  if test x"$enable_ltdl_install" = x"yes"; then
+    ac_configure_args="$ac_configure_args --enable-ltdl-install"
     LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
+    INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
+  else
+    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+    LIBLTDL="-lltdl"
+    INCLTDL=
   fi
 ])
 
@@ -810,9 +615,9 @@ AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
 AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
 AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
 AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
-AC_DEFUN(AM_SYS_NM_PARSE, [indir([AC_SYS_NM_PARSE])])dnl
-AC_DEFUN(AM_SYS_SYMBOL_UNDERSCORE, [indir([AC_SYS_SYMBOL_UNDERSCORE])])dnl
-AC_DEFUN(AM_SYS_LIBTOOL_CYGWIN, [indir([AC_SYS_LIBTOOL_CYGWIN])])dnl
+
+dnl This is just to silence aclocal about the macro not being used
+ifelse([AC_DISABLE_FAST_INSTALL])dnl
 
 # Like AC_CONFIG_HEADER, but automatically create stamp file.
 
diff --git a/bfd/configure b/bfd/configure
index 62c7927..d99ad32 100755
--- a/bfd/configure
+++ b/bfd/configure
@@ -1,7 +1,7 @@
 #! /bin/sh
 
 # Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13.1 
+# Generated automatically using autoconf version 2.13 
 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
 #
 # This configure script is free software; the Free Software Foundation
@@ -20,7 +20,7 @@ ac_help="$ac_help
 ac_help="$ac_help
   --with-gnu-ld           assume the C compiler uses GNU ld [default=no]"
 ac_help="$ac_help
-  --disable-libtool-lock  force libtool not to do file locking"
+  --disable-libtool-lock  avoid locking (might break parallel builds)"
 ac_help="$ac_help
   --enable-64-bit-bfd     64-bit support (on hosts with narrower word sizes)"
 ac_help="$ac_help
@@ -53,6 +53,7 @@ program_suffix=NONE
 program_transform_name=s,x,x,
 silent=
 site=
+sitefile=
 srcdir=
 target=NONE
 verbose=
@@ -167,6 +168,7 @@ Configuration:
   --help                  print this message
   --no-create             do not create output files
   --quiet, --silent       do not print \`checking...' messages
+  --site-file=FILE        use FILE as the site file
   --version               print the version of autoconf that created configure
 Directory and file names:
   --prefix=PREFIX         install architecture-independent files in PREFIX
@@ -337,6 +339,11 @@ EOF
   -site=* | --site=* | --sit=*)
     site="$ac_optarg" ;;
 
+  -site-file | --site-file | --site-fil | --site-fi | --site-f)
+    ac_prev=sitefile ;;
+  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
+    sitefile="$ac_optarg" ;;
+
   -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
     ac_prev=srcdir ;;
   -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
@@ -358,7 +365,7 @@ EOF
     verbose=yes ;;
 
   -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13.1"
+    echo "configure generated by autoconf version 2.13"
     exit 0 ;;
 
   -with-* | --with-*)
@@ -502,12 +509,16 @@ fi
 srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
 
 # Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
-  if test "x$prefix" != xNONE; then
-    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-  else
-    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+if test -z "$sitefile"; then
+  if test -z "$CONFIG_SITE"; then
+    if test "x$prefix" != xNONE; then
+      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+    else
+      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+    fi
   fi
+else
+  CONFIG_SITE="$sitefile"
 fi
 for ac_site_file in $CONFIG_SITE; do
   if test -r "$ac_site_file"; then
@@ -518,7 +529,7 @@ done
 
 if test -r "$cache_file"; then
   echo "loading cache $cache_file"
-      test -f "$cache_file" && . $cache_file
+  . $cache_file
 else
   echo "creating cache $cache_file"
   > $cache_file
@@ -562,130 +573,9 @@ done
 if test -z "$ac_aux_dir"; then
   { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
 fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:572: checking host system type" >&5
-if test "x$ac_cv_host" = "x" || (test "x$host" != "xNONE" && test "x$host" != "x$ac_cv_host_alias"); then
-
-# Make sure we can run config.sub.
-  if $ac_config_sub sun4 >/dev/null 2>&1; then :
-    else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-  fi
-
-  ac_cv_host_alias=$host
-  case "$ac_cv_host_alias" in
-  NONE)
-    case $nonopt in
-    NONE)
-      if ac_cv_host_alias=`$ac_config_guess`; then :
-      else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-      fi ;;
-    *) ac_cv_host_alias=$nonopt ;;
-    esac ;;
-  esac
-
-  ac_cv_host=`$ac_config_sub $ac_cv_host_alias`
-  ac_cv_host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-  ac_cv_host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-  ac_cv_host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-else
-  echo $ac_n "(cached) $ac_c" 1>&6
-fi
-
-echo "$ac_t""$ac_cv_host" 1>&6
-
-host=$ac_cv_host
-host_alias=$ac_cv_host_alias
-host_cpu=$ac_cv_host_cpu
-host_vendor=$ac_cv_host_vendor
-host_os=$ac_cv_host_os
-
-
-
-
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:613: checking target system type" >&5
-if test "x$ac_cv_target" = "x" || (test "x$target" != "xNONE" && test "x$target" != "x$ac_cv_target_alias"); then
-
-# Make sure we can run config.sub.
-  if $ac_config_sub sun4 >/dev/null 2>&1; then :
-    else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-  fi
-
-  ac_cv_target_alias=$target
-  case "$ac_cv_target_alias" in
-  NONE)
-    case $nonopt in
-    NONE)
-      ac_cv_target_alias=$host_alias ;;
-
-    *) ac_cv_target_alias=$nonopt ;;
-    esac ;;
-  esac
-
-  ac_cv_target=`$ac_config_sub $ac_cv_target_alias`
-  ac_cv_target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-  ac_cv_target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-  ac_cv_target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-else
-  echo $ac_n "(cached) $ac_c" 1>&6
-fi
-
-echo "$ac_t""$ac_cv_target" 1>&6
-
-target=$ac_cv_target
-target_alias=$ac_cv_target_alias
-target_cpu=$ac_cv_target_cpu
-target_vendor=$ac_cv_target_vendor
-target_os=$ac_cv_target_os
-
-
-
-
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:653: checking build system type" >&5
-if test "x$ac_cv_build" = "x" || (test "x$build" != "xNONE" && test "x$build" != "x$ac_cv_build_alias"); then
-
-# Make sure we can run config.sub.
-  if $ac_config_sub sun4 >/dev/null 2>&1; then :
-    else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-  fi
-
-  ac_cv_build_alias=$build
-  case "$ac_cv_build_alias" in
-  NONE)
-    case $nonopt in
-    NONE)
-      ac_cv_build_alias=$host_alias ;;
-
-    *) ac_cv_build_alias=$nonopt ;;
-    esac ;;
-  esac
-
-  ac_cv_build=`$ac_config_sub $ac_cv_build_alias`
-  ac_cv_build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-  ac_cv_build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-  ac_cv_build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-else
-  echo $ac_n "(cached) $ac_c" 1>&6
-fi
-
-echo "$ac_t""$ac_cv_build" 1>&6
-
-build=$ac_cv_build
-build_alias=$ac_cv_build_alias
-build_cpu=$ac_cv_build_cpu
-build_vendor=$ac_cv_build_vendor
-build_os=$ac_cv_build_os
-
-
-
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
 
 
 # Do some error checking and defaulting for the host and target type.
@@ -708,6 +598,69 @@ NONE---*---* | *---NONE---* | *---*---NONE) ;;
 *) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
 esac
 
+
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:609: checking host system type" >&5
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+  case $nonopt in
+  NONE)
+    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+    fi ;;
+  *) host_alias=$nonopt ;;
+  esac ;;
+esac
+
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:630: checking target system type" >&5
+
+target_alias=$target
+case "$target_alias" in
+NONE)
+  case $nonopt in
+  NONE) target_alias=$host_alias ;;
+  *) target_alias=$nonopt ;;
+  esac ;;
+esac
+
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:648: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+  case $nonopt in
+  NONE) build_alias=$host_alias ;;
+  *) build_alias=$nonopt ;;
+  esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
 test "$host_alias" != "$target_alias" &&
   test "$program_prefix$program_suffix$program_transform_name" = \
     NONENONEs,x,x, &&
@@ -716,8 +669,8 @@ test "$host_alias" != "$target_alias" &&
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:720: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:673: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
@@ -746,8 +699,8 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:750: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:703: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
@@ -793,12 +746,12 @@ fi
 
   if test -z "$CC"; then
     case "`uname -s`" in
-    *win32* | *WIN32* | *CYGWIN*)
+    *win32* | *WIN32*)
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:801: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:754: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
@@ -828,8 +781,8 @@ fi
   test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
 fi
 
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:833: checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) works" >&5
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:786: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -840,12 +793,12 @@ cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 844 "configure"
+#line 797 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:849: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:802: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -870,14 +823,14 @@ echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
 if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:875: checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:828: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:880: checking whether we are using GNU C" >&5
-if eval "test \"\${ac_cv_prog_gcc+set}\" = set"; then
+echo "configure:833: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.c <<EOF
@@ -885,7 +838,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:889: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:842: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -904,8 +857,8 @@ ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:908: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"\${ac_cv_prog_cc_g+set}\" = set"; then
+echo "configure:861: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   echo 'void f(){}' > conftest.c
@@ -936,7 +889,7 @@ else
 fi
 
 echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
-echo "configure:940: checking for POSIXized ISC" >&5
+echo "configure:893: checking for POSIXized ISC" >&5
 if test -d /etc/conf/kconfig.d &&
   grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
 then
@@ -969,9 +922,9 @@ fi
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:973: checking for a BSD compatible install" >&5
+echo "configure:926: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
-if eval "test \"\${ac_cv_path_install+set}\" = set"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
     IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
@@ -989,10 +942,6 @@ else
             grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
 	    # AIX install.  It has an incompatible calling convention.
 	    :
-	  elif test $ac_prog = install &&
-	    grep pwplus $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # program-specific install script used by HP pwplus--don't use.
-	    :
 	  else
 	    ac_cv_path_install="$ac_dir/$ac_prog -c"
 	    break 2
@@ -1021,12 +970,12 @@ echo "$ac_t""$INSTALL" 1>&6
 # It thinks the first close brace ends the variable substitution.
 test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
 
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
 
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
 echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:1030: checking whether build environment is sane" >&5
+echo "configure:979: checking whether build environment is sane" >&5
 # Just in case
 sleep 1
 echo timestamp > conftestfile
@@ -1074,18 +1023,18 @@ EOF_SED
   rm -f conftestsed
 fi
 test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},;$program_transform_name"
+  program_transform_name="s,^,${program_prefix},; $program_transform_name"
 # Use a double $ so make ignores it.
 test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},;$program_transform_name"
+  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
 
 # sed with no file args requires a program.
 test "$program_transform_name" = "" && program_transform_name="s,x,x,"
 
 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:1087: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:1036: checking whether ${MAKE-make} sets \${MAKE}" >&5
 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
+if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftestmake <<\EOF
@@ -1129,7 +1078,7 @@ EOF
 
 missing_dir=`cd $ac_aux_dir && pwd`
 echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1133: checking for working aclocal" >&5
+echo "configure:1082: checking for working aclocal" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -1142,7 +1091,7 @@ else
 fi
 
 echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1146: checking for working autoconf" >&5
+echo "configure:1095: checking for working autoconf" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -1155,7 +1104,7 @@ else
 fi
 
 echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1159: checking for working automake" >&5
+echo "configure:1108: checking for working automake" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -1168,7 +1117,7 @@ else
 fi
 
 echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1172: checking for working autoheader" >&5
+echo "configure:1121: checking for working autoheader" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -1181,7 +1130,7 @@ else
 fi
 
 echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1185: checking for working makeinfo" >&5
+echo "configure:1134: checking for working makeinfo" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -1204,8 +1153,8 @@ fi
 # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1208: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_AR+set}\" = set"; then
+echo "configure:1157: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$AR"; then
@@ -1236,8 +1185,8 @@ fi
 # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1240: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_RANLIB+set}\" = set"; then
+echo "configure:1189: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$RANLIB"; then
@@ -1268,8 +1217,8 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1272: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_RANLIB+set}\" = set"; then
+echo "configure:1221: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$RANLIB"; then
@@ -1374,8 +1323,8 @@ fi
 # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1378: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_RANLIB+set}\" = set"; then
+echo "configure:1327: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$RANLIB"; then
@@ -1413,11 +1362,11 @@ ac_prog=ld
 if test "$ac_cv_prog_gcc" = yes; then
   # Check if gcc -print-prog-name=ld gives a path.
   echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1417: checking for ld used by GCC" >&5
+echo "configure:1366: checking for ld used by GCC" >&5
   ac_prog=`($CC -print-prog-name=ld) 2>&5`
   case "$ac_prog" in
     # Accept absolute paths.
-    /* | [A-Za-z]:[\\/]*)
+    [\\/]* | [A-Za-z]:[\\/]*)
       re_direlt='/[^/][^/]*/\.\./'
       # Canonicalize the path of ld
       ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
@@ -1437,19 +1386,19 @@ echo "configure:1417: checking for ld used by GCC" >&5
   esac
 elif test "$with_gnu_ld" = yes; then
   echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1441: checking for GNU ld" >&5
+echo "configure:1390: checking for GNU ld" >&5
 else
   echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1444: checking for non-GNU ld" >&5
+echo "configure:1393: checking for non-GNU ld" >&5
 fi
-if eval "test \"\${ac_cv_path_LD+set}\" = set"; then
+if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
   for ac_dir in $PATH; do
     test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog"; then
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
       ac_cv_path_LD="$ac_dir/$ac_prog"
       # Check to see if the program is GNU ld.  I'd rather use --version,
       # but apparently some GNU ld's only accept -v.
@@ -1474,10 +1423,9 @@ else
   echo "$ac_t""no" 1>&6
 fi
 test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-
 echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1480: checking if the linker ($LD) is GNU ld" >&5
-if eval "test \"\${ac_cv_prog_gnu_ld+set}\" = set"; then
+echo "configure:1428: checking if the linker ($LD) is GNU ld" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   # I'd rather use --version here, but apparently some GNU ld's only accept -v.
@@ -1492,18 +1440,18 @@ echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6
 
 
 echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1496: checking for BSD-compatible nm" >&5
-if eval "test \"\${ac_cv_path_NM+set}\" = set"; then
+echo "configure:1444: checking for BSD-compatible nm" >&5
+if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$NM"; then
   # Let the user override the test.
   ac_cv_path_NM="$NM"
 else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
   for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
     test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/nm; then
+    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
       # Check to see if the nm accepts a BSD-compat flag.
       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
       #   nm: unknown option "B" ignored
@@ -1527,214 +1475,9 @@ fi
 NM="$ac_cv_path_NM"
 echo "$ac_t""$NM" 1>&6
 
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-echo $ac_n "checking command to parse $NM output""... $ac_c" 1>&6
-echo "configure:1534: checking command to parse $NM output" >&5
-if eval "test \"\${ac_cv_sys_global_symbol_pipe+set}\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  # These are sane defaults that work on at least a few old systems.
-# {They come from Ultrix.  What could be older than Ultrix?!! ;)}
-
-# Character class describing NM global symbol codes.
-ac_symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-ac_symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-# Define system-specific variables.
-case "$host_os" in
-aix*)
-  ac_symcode='[BCDT]'
-  ;;
-cygwin* | mingw*)
-  ac_symcode='[ABCDGISTW]'
-  ;;
-hpux*)
-  ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
-  ;;
-irix*)
-  ac_symcode='[BCDEGRST]'
-  ;;
-solaris*)
-  ac_symcode='[BDT]'
-  ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
-  ac_symcode='[ABCDGISTW]'
-fi
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
-  ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.* 	\($ac_symcode\) 	 	*\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'"
-
-  # Check to see that the pipe works correctly.
-  ac_pipe_works=no
-  rm -f conftest.$ac_ext
-  cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func;return 0;}
-EOF
-
-  if { (eval echo configure:1597: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    # Now try to grab the symbols.
-    ac_nlist=conftest.nm
-  
-    if { (eval echo configure:1601: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then
-
-      # Try sorting and uniquifying the output.
-      if sort "$ac_nlist" | uniq > "$ac_nlist"T; then
-	mv -f "$ac_nlist"T "$ac_nlist"
-      else
-	rm -f "$ac_nlist"T
-      fi
-
-      # Make sure that we snagged all the symbols we need.
-      if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then
-	if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then
-	  cat <<EOF > conftest.c
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
-	  # Now generate the symbol file.
-	  eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c'
-
-	  cat <<EOF >> conftest.c
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
-  const char *name;
-  lt_ptr_t address;
-}
-lt_preloaded_symbols[] =
-{
-EOF
-	sed 's/^. \(.*\) \(.*\)$/  {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c
-	cat <<\EOF >> conftest.c
-  {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
-	  # Now try linking the two files.
-	  mv conftest.$ac_objext conftestm.$ac_objext
-	  ac_save_LIBS="$LIBS"
-	  ac_save_CFLAGS="$CFLAGS"
-	  LIBS="conftestm.$ac_objext"
-	  CFLAGS="$CFLAGS$no_builtin_flag"
-	  if { (eval echo configure:1653: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-	    ac_pipe_works=yes
-	  else
-	    echo "configure: failed program was:" >&5
-	    cat conftest.c >&5
-	  fi
-	  LIBS="$ac_save_LIBS"
-	  CFLAGS="$ac_save_CFLAGS"
-	else
-	  echo "cannot find nm_test_func in $ac_nlist" >&5
-	fi
-      else
-	echo "cannot find nm_test_var in $ac_nlist" >&5
-      fi
-    else
-      echo "cannot run $ac_cv_sys_global_symbol_pipe" >&5
-    fi
-  else
-    echo "$progname: failed program was:" >&5
-    cat conftest.c >&5
-  fi
-  rm -rf conftest*
-
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$ac_pipe_works" = yes; then
-    if test x"$ac_symprfx" = x"_"; then
-      ac_cv_sys_symbol_underscore=yes
-    else
-      ac_cv_sys_symbol_underscore=no
-    fi
-    break
-  else
-    ac_cv_sys_global_symbol_pipe=
-  fi
-done
-
-fi
-
-
-ac_result=yes
-if test -z "$ac_cv_sys_global_symbol_pipe"; then
-   ac_result=no
-fi
-echo "$ac_t""$ac_result" 1>&6
-
-echo $ac_n "checking for _ prefix in compiled symbols""... $ac_c" 1>&6
-echo "configure:1699: checking for _ prefix in compiled symbols" >&5
-if eval "test \"\${ac_cv_sys_symbol_underscore+set}\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  ac_cv_sys_symbol_underscore=no
-cat > conftest.$ac_ext <<EOF
-void nm_test_func(){}
-int main(){nm_test_func;return 0;}
-EOF
-if { (eval echo configure:1708: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  # Now try to grab the symbols.
-  ac_nlist=conftest.nm
-  if { (eval echo configure:1711: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then
-    # See whether the symbols have a leading underscore.
-    if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
-      ac_cv_sys_symbol_underscore=yes
-    else
-      if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
-	:
-      else
-	echo "configure: cannot find nm_test_func in $ac_nlist" >&5
-      fi
-    fi
-  else
-    echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&5
-  fi
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.c >&5
-fi
-rm -rf conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_sys_symbol_underscore" 1>&6
-USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no}
-
 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1737: checking whether ln -s works" >&5
-if eval "test \"\${ac_cv_prog_LN_S+set}\" = set"; then
+echo "configure:1480: checking whether ln -s works" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   rm -f conftestdata
@@ -1754,23 +1497,36 @@ else
 fi
 
 
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
+
 # Check for any special flags to pass to ltconfig.
 libtool_flags="--cache-file=$cache_file"
 test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
 test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
 test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
 test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
 test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
 
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+  enableval="$enable_libtool_lock"
+  :
+fi
+
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+
 # Some flags need to be propagated to the compiler or linker for good
 # libtool support.
-case "$host" in
+case "$lt_target" in
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 1773 "configure"' > conftest.$ac_ext
-  if { (eval echo configure:1774: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  echo '#line 1529 "configure"' > conftest.$ac_ext
+  if { (eval echo configure:1530: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
     case "`/usr/bin/file conftest.o`" in
     *32-bit*)
       LD="${LD-ld} -32"
@@ -1791,19 +1547,19 @@ case "$host" in
   SAVE_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -belf"
   echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:1795: checking whether the C compiler needs -belf" >&5
-if eval "test \"\${lt_cv_cc_needs_belf+set}\" = set"; then
+echo "configure:1551: checking whether the C compiler needs -belf" >&5
+if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1800 "configure"
+#line 1556 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:1807: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1563: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   lt_cv_cc_needs_belf=yes
 else
@@ -1822,161 +1578,9 @@ echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
   fi
   ;;
 
-*-*-cygwin*)
-  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1830: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_DLLTOOL+set}\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_DLLTOOL"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1862: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_DLLTOOL+set}\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  DLLTOOL="false"
-fi
-fi
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1897: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_AS+set}\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_AS"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1929: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_AS+set}\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  AS="false"
-fi
-fi
-
-
-  ;;
 
 esac
 
-# enable the --disable-libtool-lock switch
-
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
-  enableval="$enable_libtool_lock"
-  need_locks=$enableval
-else
-  need_locks=yes
-fi
-
-
-if test x"$need_locks" = xno; then
-  libtool_flags="$libtool_flags --disable-lock"
-fi
-
 
 # Save cache, so that ltconfig can load it
 cat > confcache <<\EOF
@@ -2029,16 +1633,17 @@ rm -f confcache
 
 # Actually configure libtool.  ac_aux_dir is where install-sh is found.
 CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
-DLLTOOL="$DLLTOOL" AS="$AS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
 ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
 || { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
 
 # Reload cache, that may have been modified by ltconfig
 if test -r "$cache_file"; then
   echo "loading cache $cache_file"
-      test -f "$cache_file" && . $cache_file
+  . $cache_file
 else
   echo "creating cache $cache_file"
   > $cache_file
@@ -2116,17 +1721,17 @@ EOF_SED
   rm -f conftestsed
 fi
 test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},;$program_transform_name"
+  program_transform_name="s,^,${program_prefix},; $program_transform_name"
 # Use a double $ so make ignores it.
 test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},;$program_transform_name"
+  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
 
 # sed with no file args requires a program.
 test "$program_transform_name" = "" && program_transform_name="s,x,x,"
 
 
 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:2130: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:1735: checking whether to enable maintainer-specific portions of Makefiles" >&5
     # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"
@@ -2149,12 +1754,12 @@ fi
   
 
 echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:2153: checking for Cygwin environment" >&5
-if eval "test \"\${ac_cv_cygwin+set}\" = set"; then
+echo "configure:1758: checking for Cygwin environment" >&5
+if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2158 "configure"
+#line 1763 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -2165,7 +1770,7 @@ int main() {
 return __CYGWIN__;
 ; return 0; }
 EOF
-if { (eval echo configure:2169: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1774: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_cygwin=yes
 else
@@ -2175,25 +1780,26 @@ else
   ac_cv_cygwin=no
 fi
 rm -f conftest*
+rm -f conftest*
 fi
 
 echo "$ac_t""$ac_cv_cygwin" 1>&6
 CYGWIN=
 test "$ac_cv_cygwin" = yes && CYGWIN=yes
 echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:2185: checking for mingw32 environment" >&5
-if eval "test \"\${ac_cv_mingw32+set}\" = set"; then
+echo "configure:1791: checking for mingw32 environment" >&5
+if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2190 "configure"
+#line 1796 "configure"
 #include "confdefs.h"
 
 int main() {
 return __MINGW32__;
 ; return 0; }
 EOF
-if { (eval echo configure:2197: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1803: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_mingw32=yes
 else
@@ -2203,57 +1809,29 @@ else
   ac_cv_mingw32=no
 fi
 rm -f conftest*
+rm -f conftest*
 fi
 
 echo "$ac_t""$ac_cv_mingw32" 1>&6
 MINGW32=
 test "$ac_cv_mingw32" = yes && MINGW32=yes
-echo $ac_n "checking for EMX OS/2 environment""... $ac_c" 1>&6
-echo "configure:2213: checking for EMX OS/2 environment" >&5
-if eval "test \"\${ac_cv_emxos2+set}\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2218 "configure"
-#include "confdefs.h"
-
-int main() {
-return __EMX__;
-; return 0; }
-EOF
-if { (eval echo configure:2225: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_emxos2=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_emxos2=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_emxos2" 1>&6
-EMXOS2=
-test "$ac_cv_emxos2" = yes && EMXOS2=yes
-
 
 
 echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:2244: checking for executable suffix" >&5
-if eval "test \"\${ac_cv_exeext+set}\" = set"; then
+echo "configure:1822: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes || test "$EMXOS2" = yes; then
+  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
   ac_cv_exeext=.exe
 else
   rm -f conftest*
   echo 'int main () { return 0; }' > conftest.$ac_ext
   ac_cv_exeext=
-  if { (eval echo configure:2254: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+  if { (eval echo configure:1832: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
     for file in conftest.*; do
       case $file in
-      *.c | *.C | *.o | *.obj | *.xcoff) ;;
+      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
       *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
       esac
     done
@@ -2279,8 +1857,8 @@ target64=false
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2283: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:1861: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
@@ -2309,8 +1887,8 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2313: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:1891: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
@@ -2356,12 +1934,12 @@ fi
 
   if test -z "$CC"; then
     case "`uname -s`" in
-    *win32* | *WIN32* | *CYGWIN*)
+    *win32* | *WIN32*)
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2364: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:1942: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
@@ -2391,8 +1969,8 @@ fi
   test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
 fi
 
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:2396: checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) works" >&5
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:1974: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -2403,12 +1981,12 @@ cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 2407 "configure"
+#line 1985 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:2412: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1990: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -2433,14 +2011,14 @@ echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
 if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2438: checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:2016: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2443: checking whether we are using GNU C" >&5
-if eval "test \"\${ac_cv_prog_gcc+set}\" = set"; then
+echo "configure:2021: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.c <<EOF
@@ -2448,7 +2026,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2452: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2030: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -2467,8 +2045,8 @@ ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2471: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"\${ac_cv_prog_cc_g+set}\" = set"; then
+echo "configure:2049: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   echo 'void f(){}' > conftest.c
@@ -2501,13 +2079,13 @@ fi
 
 ALL_LINGUAS=
 echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:2505: checking how to run the C preprocessor" >&5
+echo "configure:2083: checking how to run the C preprocessor" >&5
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
 fi
 if test -z "$CPP"; then
-if eval "test \"\${ac_cv_prog_CPP+set}\" = set"; then
+if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
     # This must be in double quotes, not single quotes, because CPP may get
@@ -2516,13 +2094,13 @@ else
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp.
   cat > conftest.$ac_ext <<EOF
-#line 2520 "configure"
+#line 2098 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2526: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2104: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -2533,13 +2111,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -E -traditional-cpp"
   cat > conftest.$ac_ext <<EOF
-#line 2537 "configure"
+#line 2115 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2543: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2121: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -2550,13 +2128,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -nologo -E"
   cat > conftest.$ac_ext <<EOF
-#line 2554 "configure"
+#line 2132 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2560: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2138: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -2581,12 +2159,12 @@ fi
 echo "$ac_t""$CPP" 1>&6
 
 echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:2585: checking for ANSI C header files" >&5
-if eval "test \"\${ac_cv_header_stdc+set}\" = set"; then
+echo "configure:2163: checking for ANSI C header files" >&5
+if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2590 "configure"
+#line 2168 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 #include <stdarg.h>
@@ -2594,7 +2172,7 @@ else
 #include <float.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2598: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2176: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2611,7 +2189,7 @@ rm -f conftest*
 if test $ac_cv_header_stdc = yes; then
   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 2615 "configure"
+#line 2193 "configure"
 #include "confdefs.h"
 #include <string.h>
 EOF
@@ -2629,7 +2207,7 @@ fi
 if test $ac_cv_header_stdc = yes; then
   # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 2633 "configure"
+#line 2211 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 EOF
@@ -2650,7 +2228,7 @@ if test "$cross_compiling" = yes; then
   :
 else
   cat > conftest.$ac_ext <<EOF
-#line 2654 "configure"
+#line 2232 "configure"
 #include "confdefs.h"
 #include <ctype.h>
 #define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
@@ -2661,7 +2239,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
 exit (0); }
 
 EOF
-if { (eval echo configure:2665: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2243: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   :
 else
@@ -2685,12 +2263,12 @@ EOF
 fi
 
 echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:2689: checking for working const" >&5
-if eval "test \"\${ac_cv_c_const+set}\" = set"; then
+echo "configure:2267: checking for working const" >&5
+if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2694 "configure"
+#line 2272 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -2739,7 +2317,7 @@ ccp = (char const *const *) p;
 
 ; return 0; }
 EOF
-if { (eval echo configure:2743: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2321: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_const=yes
 else
@@ -2760,21 +2338,21 @@ EOF
 fi
 
 echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:2764: checking for inline" >&5
-if eval "test \"\${ac_cv_c_inline+set}\" = set"; then
+echo "configure:2342: checking for inline" >&5
+if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_cv_c_inline=no
 for ac_kw in inline __inline__ __inline; do
   cat > conftest.$ac_ext <<EOF
-#line 2771 "configure"
+#line 2349 "configure"
 #include "confdefs.h"
 
 int main() {
-} $ac_kw int foo() {
+} $ac_kw foo() {
 ; return 0; }
 EOF
-if { (eval echo configure:2778: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2356: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_inline=$ac_kw; break
 else
@@ -2800,12 +2378,12 @@ EOF
 esac
 
 echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:2804: checking for off_t" >&5
-if eval "test \"\${ac_cv_type_off_t+set}\" = set"; then
+echo "configure:2382: checking for off_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2809 "configure"
+#line 2387 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -2816,31 +2394,29 @@ EOF
 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
   egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
   rm -rf conftest*
-  eval "ac_cv_type_off_t=yes"
+  ac_cv_type_off_t=yes
 else
   rm -rf conftest*
-  eval "ac_cv_type_off_t=no"
+  ac_cv_type_off_t=no
 fi
 rm -f conftest*
 
 fi
-if eval "test \"`echo '$ac_cv_type_'off_t`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-  cat >> confdefs.h <<EOF
+echo "$ac_t""$ac_cv_type_off_t" 1>&6
+if test $ac_cv_type_off_t = no; then
+  cat >> confdefs.h <<\EOF
 #define off_t long
 EOF
 
 fi
 
 echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:2839: checking for size_t" >&5
-if eval "test \"\${ac_cv_type_size_t+set}\" = set"; then
+echo "configure:2415: checking for size_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2844 "configure"
+#line 2420 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -2851,19 +2427,17 @@ EOF
 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
   egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
   rm -rf conftest*
-  eval "ac_cv_type_size_t=yes"
+  ac_cv_type_size_t=yes
 else
   rm -rf conftest*
-  eval "ac_cv_type_size_t=no"
+  ac_cv_type_size_t=no
 fi
 rm -f conftest*
 
 fi
-if eval "test \"`echo '$ac_cv_type_'size_t`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-  cat >> confdefs.h <<EOF
+echo "$ac_t""$ac_cv_type_size_t" 1>&6
+if test $ac_cv_type_size_t = no; then
+  cat >> confdefs.h <<\EOF
 #define size_t unsigned
 EOF
 
@@ -2872,19 +2446,19 @@ fi
 # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
 # for constant arguments.  Useless!
 echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:2876: checking for working alloca.h" >&5
-if eval "test \"\${ac_cv_header_alloca_h+set}\" = set"; then
+echo "configure:2450: checking for working alloca.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2881 "configure"
+#line 2455 "configure"
 #include "confdefs.h"
 #include <alloca.h>
 int main() {
 char *p = alloca(2 * sizeof(int));
 ; return 0; }
 EOF
-if { (eval echo configure:2888: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2462: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_header_alloca_h=yes
 else
@@ -2905,12 +2479,12 @@ EOF
 fi
 
 echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:2909: checking for alloca" >&5
-if eval "test \"\${ac_cv_func_alloca_works+set}\" = set"; then
+echo "configure:2483: checking for alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2914 "configure"
+#line 2488 "configure"
 #include "confdefs.h"
 
 #ifdef __GNUC__
@@ -2938,7 +2512,7 @@ int main() {
 char *p = (char *) alloca(1);
 ; return 0; }
 EOF
-if { (eval echo configure:2942: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2516: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_func_alloca_works=yes
 else
@@ -2970,12 +2544,12 @@ EOF
 
 
 echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:2974: checking whether alloca needs Cray hooks" >&5
-if eval "test \"\${ac_cv_os_cray+set}\" = set"; then
+echo "configure:2548: checking whether alloca needs Cray hooks" >&5
+if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2979 "configure"
+#line 2553 "configure"
 #include "confdefs.h"
 #if defined(CRAY) && ! defined(CRAY2)
 webecray
@@ -3000,12 +2574,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6
 if test $ac_cv_os_cray = yes; then
 for ac_func in _getb67 GETB67 getb67; do
   echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3004: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:2578: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3009 "configure"
+#line 2583 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -3014,7 +2588,6 @@ else
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char $ac_func();
-char (*f)();
 
 int main() {
 
@@ -3024,12 +2597,12 @@ int main() {
 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
 choke me
 #else
-f = $ac_func;
+$ac_func();
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:3033: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2606: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -3056,15 +2629,15 @@ done
 fi
 
 echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:3060: checking stack direction for C alloca" >&5
-if eval "test \"\${ac_cv_c_stack_direction+set}\" = set"; then
+echo "configure:2633: checking stack direction for C alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test "$cross_compiling" = yes; then
   ac_cv_c_stack_direction=0
 else
   cat > conftest.$ac_ext <<EOF
-#line 3068 "configure"
+#line 2641 "configure"
 #include "confdefs.h"
 find_stack_direction ()
 {
@@ -3083,7 +2656,7 @@ main ()
   exit (find_stack_direction() < 0);
 }
 EOF
-if { (eval echo configure:3087: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2660: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_c_stack_direction=1
 else
@@ -3108,17 +2681,17 @@ for ac_hdr in unistd.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3112: checking for $ac_hdr" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:2685: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3117 "configure"
+#line 2690 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3122: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2695: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -3147,12 +2720,12 @@ done
 for ac_func in getpagesize
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3151: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:2724: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3156 "configure"
+#line 2729 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -3161,7 +2734,6 @@ else
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char $ac_func();
-char (*f)();
 
 int main() {
 
@@ -3171,12 +2743,12 @@ int main() {
 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
 choke me
 #else
-f = $ac_func;
+$ac_func();
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:3180: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2752: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -3201,15 +2773,15 @@ fi
 done
 
 echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:3205: checking for working mmap" >&5
-if eval "test \"\${ac_cv_func_mmap_fixed_mapped+set}\" = set"; then
+echo "configure:2777: checking for working mmap" >&5
+if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test "$cross_compiling" = yes; then
   ac_cv_func_mmap_fixed_mapped=no
 else
   cat > conftest.$ac_ext <<EOF
-#line 3213 "configure"
+#line 2785 "configure"
 #include "confdefs.h"
 
 /* Thanks to Mike Haertel and Jim Avera for this test.
@@ -3349,7 +2921,7 @@ main()
 }
 
 EOF
-if { (eval echo configure:3353: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2925: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_func_mmap_fixed_mapped=yes
 else
@@ -3377,17 +2949,17 @@ unistd.h values.h sys/param.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3381: checking for $ac_hdr" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:2953: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3386 "configure"
+#line 2958 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3391: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2963: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -3417,12 +2989,12 @@ done
 __argz_count __argz_stringify __argz_next
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3421: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:2993: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3426 "configure"
+#line 2998 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -3431,7 +3003,6 @@ else
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char $ac_func();
-char (*f)();
 
 int main() {
 
@@ -3441,12 +3012,12 @@ int main() {
 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
 choke me
 #else
-f = $ac_func;
+$ac_func();
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:3450: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3021: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -3475,12 +3046,12 @@ done
      for ac_func in stpcpy
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3479: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:3050: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3484 "configure"
+#line 3055 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -3489,7 +3060,6 @@ else
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char $ac_func();
-char (*f)();
 
 int main() {
 
@@ -3499,12 +3069,12 @@ int main() {
 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
 choke me
 #else
-f = $ac_func;
+$ac_func();
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:3508: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3078: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -3538,19 +3108,19 @@ EOF
 
    if test $ac_cv_header_locale_h = yes; then
     echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:3542: checking for LC_MESSAGES" >&5
-if eval "test \"\${am_cv_val_LC_MESSAGES+set}\" = set"; then
+echo "configure:3112: checking for LC_MESSAGES" >&5
+if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3547 "configure"
+#line 3117 "configure"
 #include "confdefs.h"
 #include <locale.h>
 int main() {
 return LC_MESSAGES
 ; return 0; }
 EOF
-if { (eval echo configure:3554: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3124: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   am_cv_val_LC_MESSAGES=yes
 else
@@ -3571,7 +3141,7 @@ EOF
     fi
   fi
    echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:3575: checking whether NLS is requested" >&5
+echo "configure:3145: checking whether NLS is requested" >&5
         # Check whether --enable-nls or --disable-nls was given.
 if test "${enable_nls+set}" = set; then
   enableval="$enable_nls"
@@ -3591,7 +3161,7 @@ fi
 EOF
 
       echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:3595: checking whether included gettext is requested" >&5
+echo "configure:3165: checking whether included gettext is requested" >&5
       # Check whether --with-included-gettext or --without-included-gettext was given.
 if test "${with_included_gettext+set}" = set; then
   withval="$with_included_gettext"
@@ -3610,17 +3180,17 @@ fi
 
 	ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:3614: checking for libintl.h" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:3184: checking for libintl.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3619 "configure"
+#line 3189 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3624: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3194: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -3637,19 +3207,19 @@ fi
 if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:3641: checking for gettext in libc" >&5
-if eval "test \"\${gt_cv_func_gettext_libc+set}\" = set"; then
+echo "configure:3211: checking for gettext in libc" >&5
+if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3646 "configure"
+#line 3216 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 int main() {
 return (int) gettext ("")
 ; return 0; }
 EOF
-if { (eval echo configure:3653: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3223: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gt_cv_func_gettext_libc=yes
 else
@@ -3665,15 +3235,15 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6
 
 	   if test "$gt_cv_func_gettext_libc" != "yes"; then
 	     echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:3669: checking for bindtextdomain in -lintl" >&5
-ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-:%__p__%'`
-if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
+echo "configure:3239: checking for bindtextdomain in -lintl" >&5
+ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_save_LIBS="$LIBS"
 LIBS="-lintl  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3677 "configure"
+#line 3247 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3684,7 +3254,7 @@ int main() {
 bindtextdomain()
 ; return 0; }
 EOF
-if { (eval echo configure:3688: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3258: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -3700,19 +3270,19 @@ fi
 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:3704: checking for gettext in libintl" >&5
-if eval "test \"\${gt_cv_func_gettext_libintl+set}\" = set"; then
+echo "configure:3274: checking for gettext in libintl" >&5
+if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3709 "configure"
+#line 3279 "configure"
 #include "confdefs.h"
 
 int main() {
 return (int) gettext ("")
 ; return 0; }
 EOF
-if { (eval echo configure:3716: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3286: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gt_cv_func_gettext_libintl=yes
 else
@@ -3740,8 +3310,8 @@ EOF
 	      # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3744: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_MSGFMT+set}\" = set"; then
+echo "configure:3314: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$MSGFMT" in
@@ -3774,12 +3344,12 @@ fi
 		for ac_func in dcgettext
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3778: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:3348: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3783 "configure"
+#line 3353 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -3788,7 +3358,6 @@ else
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char $ac_func();
-char (*f)();
 
 int main() {
 
@@ -3798,12 +3367,12 @@ int main() {
 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
 choke me
 #else
-f = $ac_func;
+$ac_func();
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:3807: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3376: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -3830,8 +3399,8 @@ done
 		# Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3834: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_GMSGFMT+set}\" = set"; then
+echo "configure:3403: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$GMSGFMT" in
@@ -3866,8 +3435,8 @@ fi
 		# Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3870: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_XGETTEXT+set}\" = set"; then
+echo "configure:3439: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$XGETTEXT" in
@@ -3898,7 +3467,7 @@ else
 fi
 
 		cat > conftest.$ac_ext <<EOF
-#line 3902 "configure"
+#line 3471 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -3906,7 +3475,7 @@ extern int _nl_msg_cat_cntr;
 			       return _nl_msg_cat_cntr
 ; return 0; }
 EOF
-if { (eval echo configure:3910: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3479: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   CATOBJEXT=.gmo
 		   DATADIRNAME=share
@@ -3938,8 +3507,8 @@ fi
         # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3942: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_MSGFMT+set}\" = set"; then
+echo "configure:3511: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$MSGFMT" in
@@ -3972,8 +3541,8 @@ fi
         # Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3976: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_GMSGFMT+set}\" = set"; then
+echo "configure:3545: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$GMSGFMT" in
@@ -4008,8 +3577,8 @@ fi
         # Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4012: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_XGETTEXT+set}\" = set"; then
+echo "configure:3581: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$XGETTEXT" in
@@ -4098,7 +3667,7 @@ fi
        LINGUAS=
      else
        echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:4102: checking for catalogs to be installed" >&5
+echo "configure:3671: checking for catalogs to be installed" >&5
        NEW_LINGUAS=
        for lang in ${LINGUAS=$ALL_LINGUAS}; do
          case "$ALL_LINGUAS" in
@@ -4126,17 +3695,17 @@ echo "configure:4102: checking for catalogs to be installed" >&5
       if test "$CATOBJEXT" = ".cat"; then
 	 ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:4130: checking for linux/version.h" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:3699: checking for linux/version.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4135 "configure"
+#line 3704 "configure"
 #include "confdefs.h"
 #include <linux/version.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4140: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3709: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -4214,9 +3783,9 @@ fi
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:4218: checking for a BSD compatible install" >&5
+echo "configure:3787: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
-if eval "test \"\${ac_cv_path_install+set}\" = set"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
     IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
@@ -4234,10 +3803,6 @@ else
             grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
 	    # AIX install.  It has an incompatible calling convention.
 	    :
-	  elif test $ac_prog = install &&
-	    grep pwplus $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # program-specific install script used by HP pwplus--don't use.
-	    :
 	  else
 	    ac_cv_path_install="$ac_dir/$ac_prog -c"
 	    break 2
@@ -4266,7 +3831,7 @@ echo "$ac_t""$INSTALL" 1>&6
 # It thinks the first close brace ends the variable substitution.
 test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
 
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
 
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
@@ -4301,8 +3866,8 @@ if test "x$cross_compiling" = "xno"; then
   EXEEXT_FOR_BUILD='$(EXEEXT)'
 else
   echo $ac_n "checking for build system executable suffix""... $ac_c" 1>&6
-echo "configure:4305: checking for build system executable suffix" >&5
-if eval "test \"\${bfd_cv_build_exeext+set}\" = set"; then
+echo "configure:3870: checking for build system executable suffix" >&5
+if eval "test \"`echo '$''{'bfd_cv_build_exeext'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   rm -f conftest*
@@ -4329,17 +3894,17 @@ for ac_hdr in stddef.h string.h strings.h stdlib.h time.h unistd.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4333: checking for $ac_hdr" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:3898: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4338 "configure"
+#line 3903 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4343: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3908: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -4369,17 +3934,17 @@ for ac_hdr in fcntl.h sys/file.h sys/time.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4373: checking for $ac_hdr" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:3938: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4378 "configure"
+#line 3943 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4383: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3948: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -4406,12 +3971,12 @@ fi
 done
 
 echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:4410: checking whether time.h and sys/time.h may both be included" >&5
-if eval "test \"\${ac_cv_header_time+set}\" = set"; then
+echo "configure:3975: checking whether time.h and sys/time.h may both be included" >&5
+if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4415 "configure"
+#line 3980 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <sys/time.h>
@@ -4420,7 +3985,7 @@ int main() {
 struct tm *tp;
 ; return 0; }
 EOF
-if { (eval echo configure:4424: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3989: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_header_time=yes
 else
@@ -4445,12 +4010,12 @@ for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6
-echo "configure:4449: checking for $ac_hdr that defines DIR" >&5
-if eval "test \"\${ac_cv_header_dirent_$ac_safe+set}\" = set"; then
+echo "configure:4014: checking for $ac_hdr that defines DIR" >&5
+if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4454 "configure"
+#line 4019 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <$ac_hdr>
@@ -4458,7 +4023,7 @@ int main() {
 DIR *dirp = 0;
 ; return 0; }
 EOF
-if { (eval echo configure:4462: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4027: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   eval "ac_cv_header_dirent_$ac_safe=yes"
 else
@@ -4483,15 +4048,15 @@ done
 # Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
 if test $ac_header_dirent = dirent.h; then
 echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6
-echo "configure:4487: checking for opendir in -ldir" >&5
-ac_lib_var=`echo dir'_'opendir | sed 'y%./+-:%__p__%'`
-if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
+echo "configure:4052: checking for opendir in -ldir" >&5
+ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_save_LIBS="$LIBS"
 LIBS="-ldir  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 4495 "configure"
+#line 4060 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -4502,7 +4067,7 @@ int main() {
 opendir()
 ; return 0; }
 EOF
-if { (eval echo configure:4506: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4071: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -4524,15 +4089,15 @@ fi
 
 else
 echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6
-echo "configure:4528: checking for opendir in -lx" >&5
-ac_lib_var=`echo x'_'opendir | sed 'y%./+-:%__p__%'`
-if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
+echo "configure:4093: checking for opendir in -lx" >&5
+ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_save_LIBS="$LIBS"
 LIBS="-lx  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 4536 "configure"
+#line 4101 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -4543,7 +4108,7 @@ int main() {
 opendir()
 ; return 0; }
 EOF
-if { (eval echo configure:4547: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4112: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -4568,12 +4133,12 @@ fi
 for ac_func in fcntl getpagesize setitimer sysconf fdopen getuid getgid
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4572: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:4137: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4577 "configure"
+#line 4142 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -4582,7 +4147,6 @@ else
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char $ac_func();
-char (*f)();
 
 int main() {
 
@@ -4592,12 +4156,12 @@ int main() {
 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
 choke me
 #else
-f = $ac_func;
+$ac_func();
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:4601: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4165: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -4632,12 +4196,12 @@ EOF
 esac
 
 echo $ac_n "checking whether strstr must be declared""... $ac_c" 1>&6
-echo "configure:4636: checking whether strstr must be declared" >&5
-if eval "test \"\${bfd_cv_decl_needed_strstr+set}\" = set"; then
+echo "configure:4200: checking whether strstr must be declared" >&5
+if eval "test \"`echo '$''{'bfd_cv_decl_needed_strstr'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4641 "configure"
+#line 4205 "configure"
 #include "confdefs.h"
 
 #include <stdio.h>
@@ -4658,7 +4222,7 @@ int main() {
 char *(*pfn) = (char *(*)) strstr
 ; return 0; }
 EOF
-if { (eval echo configure:4662: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4226: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   bfd_cv_decl_needed_strstr=no
 else
@@ -4679,12 +4243,12 @@ EOF
 fi
 
 echo $ac_n "checking whether malloc must be declared""... $ac_c" 1>&6
-echo "configure:4683: checking whether malloc must be declared" >&5
-if eval "test \"\${bfd_cv_decl_needed_malloc+set}\" = set"; then
+echo "configure:4247: checking whether malloc must be declared" >&5
+if eval "test \"`echo '$''{'bfd_cv_decl_needed_malloc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4688 "configure"
+#line 4252 "configure"
 #include "confdefs.h"
 
 #include <stdio.h>
@@ -4705,7 +4269,7 @@ int main() {
 char *(*pfn) = (char *(*)) malloc
 ; return 0; }
 EOF
-if { (eval echo configure:4709: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4273: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   bfd_cv_decl_needed_malloc=no
 else
@@ -4726,12 +4290,12 @@ EOF
 fi
 
 echo $ac_n "checking whether realloc must be declared""... $ac_c" 1>&6
-echo "configure:4730: checking whether realloc must be declared" >&5
-if eval "test \"\${bfd_cv_decl_needed_realloc+set}\" = set"; then
+echo "configure:4294: checking whether realloc must be declared" >&5
+if eval "test \"`echo '$''{'bfd_cv_decl_needed_realloc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4735 "configure"
+#line 4299 "configure"
 #include "confdefs.h"
 
 #include <stdio.h>
@@ -4752,7 +4316,7 @@ int main() {
 char *(*pfn) = (char *(*)) realloc
 ; return 0; }
 EOF
-if { (eval echo configure:4756: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4320: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   bfd_cv_decl_needed_realloc=no
 else
@@ -4773,12 +4337,12 @@ EOF
 fi
 
 echo $ac_n "checking whether free must be declared""... $ac_c" 1>&6
-echo "configure:4777: checking whether free must be declared" >&5
-if eval "test \"\${bfd_cv_decl_needed_free+set}\" = set"; then
+echo "configure:4341: checking whether free must be declared" >&5
+if eval "test \"`echo '$''{'bfd_cv_decl_needed_free'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4782 "configure"
+#line 4346 "configure"
 #include "confdefs.h"
 
 #include <stdio.h>
@@ -4799,7 +4363,7 @@ int main() {
 char *(*pfn) = (char *(*)) free
 ; return 0; }
 EOF
-if { (eval echo configure:4803: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4367: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   bfd_cv_decl_needed_free=no
 else
@@ -4820,12 +4384,12 @@ EOF
 fi
 
 echo $ac_n "checking whether getenv must be declared""... $ac_c" 1>&6
-echo "configure:4824: checking whether getenv must be declared" >&5
-if eval "test \"\${bfd_cv_decl_needed_getenv+set}\" = set"; then
+echo "configure:4388: checking whether getenv must be declared" >&5
+if eval "test \"`echo '$''{'bfd_cv_decl_needed_getenv'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4829 "configure"
+#line 4393 "configure"
 #include "confdefs.h"
 
 #include <stdio.h>
@@ -4846,7 +4410,7 @@ int main() {
 char *(*pfn) = (char *(*)) getenv
 ; return 0; }
 EOF
-if { (eval echo configure:4850: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4414: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   bfd_cv_decl_needed_getenv=no
 else
@@ -5052,17 +4616,17 @@ if test "${target}" = "${host}"; then
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:5056: checking for $ac_hdr" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:4620: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5061 "configure"
+#line 4625 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5066: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4630: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -5090,19 +4654,19 @@ done
 
   if test "$ac_cv_header_sys_procfs_h" = yes; then
     echo $ac_n "checking for prstatus_t in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:5094: checking for prstatus_t in sys/procfs.h" >&5
- if eval "test \"\${bfd_cv_have_sys_procfs_type_prstatus_t+set}\" = set"; then
+echo "configure:4658: checking for prstatus_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_prstatus_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5099 "configure"
+#line 4663 "configure"
 #include "confdefs.h"
 #include <sys/procfs.h>
 int main() {
 prstatus_t avar
 ; return 0; }
 EOF
-if { (eval echo configure:5106: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4670: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   bfd_cv_have_sys_procfs_type_prstatus_t=yes
 else
@@ -5124,19 +4688,19 @@ EOF
  echo "$ac_t""$bfd_cv_have_sys_procfs_type_prstatus_t" 1>&6
 
     echo $ac_n "checking for prstatus_t.pr_who in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:5128: checking for prstatus_t.pr_who in sys/procfs.h" >&5
- if eval "test \"\${bfd_cv_have_sys_procfs_type_member_prstatus_t_pr_who+set}\" = set"; then
+echo "configure:4692: checking for prstatus_t.pr_who in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_member_prstatus_t_pr_who'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5133 "configure"
+#line 4697 "configure"
 #include "confdefs.h"
 #include <sys/procfs.h>
 int main() {
 prstatus_t avar; void* aref = (void*) &avar.pr_who
 ; return 0; }
 EOF
-if { (eval echo configure:5140: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4704: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   bfd_cv_have_sys_procfs_type_member_prstatus_t_pr_who=yes
 else
@@ -5158,19 +4722,19 @@ EOF
  echo "$ac_t""$bfd_cv_have_sys_procfs_type_member_prstatus_t_pr_who" 1>&6
 
     echo $ac_n "checking for pstatus_t in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:5162: checking for pstatus_t in sys/procfs.h" >&5
- if eval "test \"\${bfd_cv_have_sys_procfs_type_pstatus_t+set}\" = set"; then
+echo "configure:4726: checking for pstatus_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_pstatus_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5167 "configure"
+#line 4731 "configure"
 #include "confdefs.h"
 #include <sys/procfs.h>
 int main() {
 pstatus_t avar
 ; return 0; }
 EOF
-if { (eval echo configure:5174: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4738: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   bfd_cv_have_sys_procfs_type_pstatus_t=yes
 else
@@ -5192,19 +4756,19 @@ EOF
  echo "$ac_t""$bfd_cv_have_sys_procfs_type_pstatus_t" 1>&6
 
     echo $ac_n "checking for prpsinfo_t in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:5196: checking for prpsinfo_t in sys/procfs.h" >&5
- if eval "test \"\${bfd_cv_have_sys_procfs_type_prpsinfo_t+set}\" = set"; then
+echo "configure:4760: checking for prpsinfo_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_prpsinfo_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5201 "configure"
+#line 4765 "configure"
 #include "confdefs.h"
 #include <sys/procfs.h>
 int main() {
 prpsinfo_t avar
 ; return 0; }
 EOF
-if { (eval echo configure:5208: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4772: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   bfd_cv_have_sys_procfs_type_prpsinfo_t=yes
 else
@@ -5226,19 +4790,19 @@ EOF
  echo "$ac_t""$bfd_cv_have_sys_procfs_type_prpsinfo_t" 1>&6
 
     echo $ac_n "checking for psinfo_t in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:5230: checking for psinfo_t in sys/procfs.h" >&5
- if eval "test \"\${bfd_cv_have_sys_procfs_type_psinfo_t+set}\" = set"; then
+echo "configure:4794: checking for psinfo_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_psinfo_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5235 "configure"
+#line 4799 "configure"
 #include "confdefs.h"
 #include <sys/procfs.h>
 int main() {
 psinfo_t avar
 ; return 0; }
 EOF
-if { (eval echo configure:5242: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4806: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   bfd_cv_have_sys_procfs_type_psinfo_t=yes
 else
@@ -5260,19 +4824,19 @@ EOF
  echo "$ac_t""$bfd_cv_have_sys_procfs_type_psinfo_t" 1>&6
 
     echo $ac_n "checking for lwpstatus_t in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:5264: checking for lwpstatus_t in sys/procfs.h" >&5
- if eval "test \"\${bfd_cv_have_sys_procfs_type_lwpstatus_t+set}\" = set"; then
+echo "configure:4828: checking for lwpstatus_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_lwpstatus_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5269 "configure"
+#line 4833 "configure"
 #include "confdefs.h"
 #include <sys/procfs.h>
 int main() {
 lwpstatus_t avar
 ; return 0; }
 EOF
-if { (eval echo configure:5276: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4840: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   bfd_cv_have_sys_procfs_type_lwpstatus_t=yes
 else
@@ -5294,19 +4858,19 @@ EOF
  echo "$ac_t""$bfd_cv_have_sys_procfs_type_lwpstatus_t" 1>&6
 
     echo $ac_n "checking for lwpstatus_t.pr_context in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:5298: checking for lwpstatus_t.pr_context in sys/procfs.h" >&5
- if eval "test \"\${bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_context+set}\" = set"; then
+echo "configure:4862: checking for lwpstatus_t.pr_context in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_context'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5303 "configure"
+#line 4867 "configure"
 #include "confdefs.h"
 #include <sys/procfs.h>
 int main() {
 lwpstatus_t avar; void* aref = (void*) &avar.pr_context
 ; return 0; }
 EOF
-if { (eval echo configure:5310: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4874: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_context=yes
 else
@@ -5328,19 +4892,19 @@ EOF
  echo "$ac_t""$bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_context" 1>&6
 
     echo $ac_n "checking for lwpstatus_t.pr_reg in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:5332: checking for lwpstatus_t.pr_reg in sys/procfs.h" >&5
- if eval "test \"\${bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_reg+set}\" = set"; then
+echo "configure:4896: checking for lwpstatus_t.pr_reg in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_reg'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5337 "configure"
+#line 4901 "configure"
 #include "confdefs.h"
 #include <sys/procfs.h>
 int main() {
 lwpstatus_t avar; void* aref = (void*) &avar.pr_reg
 ; return 0; }
 EOF
-if { (eval echo configure:5344: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4908: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_reg=yes
 else
@@ -5362,19 +4926,19 @@ EOF
  echo "$ac_t""$bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_reg" 1>&6
 
     echo $ac_n "checking for win32_pstatus_t in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:5366: checking for win32_pstatus_t in sys/procfs.h" >&5
- if eval "test \"\${bfd_cv_have_sys_procfs_type_win32_pstatus_t+set}\" = set"; then
+echo "configure:4930: checking for win32_pstatus_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_win32_pstatus_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5371 "configure"
+#line 4935 "configure"
 #include "confdefs.h"
 #include <sys/procfs.h>
 int main() {
 win32_pstatus_t avar
 ; return 0; }
 EOF
-if { (eval echo configure:5378: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4942: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   bfd_cv_have_sys_procfs_type_win32_pstatus_t=yes
 else
@@ -5729,17 +5293,17 @@ for ac_hdr in unistd.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:5733: checking for $ac_hdr" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:5297: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5738 "configure"
+#line 5302 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5743: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5307: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -5768,12 +5332,12 @@ done
 for ac_func in getpagesize
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5772: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:5336: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5777 "configure"
+#line 5341 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -5782,7 +5346,6 @@ else
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char $ac_func();
-char (*f)();
 
 int main() {
 
@@ -5792,12 +5355,12 @@ int main() {
 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
 choke me
 #else
-f = $ac_func;
+$ac_func();
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:5801: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5364: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -5822,15 +5385,15 @@ fi
 done
 
 echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:5826: checking for working mmap" >&5
-if eval "test \"\${ac_cv_func_mmap_fixed_mapped+set}\" = set"; then
+echo "configure:5389: checking for working mmap" >&5
+if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test "$cross_compiling" = yes; then
   ac_cv_func_mmap_fixed_mapped=no
 else
   cat > conftest.$ac_ext <<EOF
-#line 5834 "configure"
+#line 5397 "configure"
 #include "confdefs.h"
 
 /* Thanks to Mike Haertel and Jim Avera for this test.
@@ -5970,7 +5533,7 @@ main()
 }
 
 EOF
-if { (eval echo configure:5974: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5537: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_func_mmap_fixed_mapped=yes
 else
@@ -5995,12 +5558,12 @@ fi
 for ac_func in madvise mprotect
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5999: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:5562: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6004 "configure"
+#line 5567 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -6009,7 +5572,6 @@ else
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char $ac_func();
-char (*f)();
 
 int main() {
 
@@ -6019,12 +5581,12 @@ int main() {
 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
 choke me
 #else
-f = $ac_func;
+$ac_func();
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:6028: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5590: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -6146,7 +5708,7 @@ do
     echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
     exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
   -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13.1"
+    echo "$CONFIG_STATUS generated by autoconf version 2.13"
     exit 0 ;;
   -help | --help | --hel | --he | --h)
     echo "\$ac_cs_usage"; exit 0 ;;
@@ -6218,12 +5780,7 @@ s%@MAKEINFO@%$MAKEINFO%g
 s%@SET_MAKE@%$SET_MAKE%g
 s%@AR@%$AR%g
 s%@RANLIB@%$RANLIB%g
-s%@LD@%$LD%g
-s%@NM@%$NM%g
-s%@USE_SYMBOL_UNDERSCORE@%$USE_SYMBOL_UNDERSCORE%g
 s%@LN_S@%$LN_S%g
-s%@DLLTOOL@%$DLLTOOL%g
-s%@AS@%$AS%g
 s%@LIBTOOL@%$LIBTOOL%g
 s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
 s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
@@ -6487,5 +6044,5 @@ exit 0
 EOF
 chmod +x $CONFIG_STATUS
 rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || $SHELL $CONFIG_STATUS || exit 1
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
 
diff --git a/bfd/doc/Makefile.in b/bfd/doc/Makefile.in
index 29139b2..343cab1 100644
--- a/bfd/doc/Makefile.in
+++ b/bfd/doc/Makefile.in
@@ -89,14 +89,13 @@ INSTOBJEXT = @INSTOBJEXT@
 INTLDEPS = @INTLDEPS@
 INTLLIBS = @INTLLIBS@
 INTLOBJS = @INTLOBJS@
-LD = @LD@
 LIBTOOL = @LIBTOOL@
 LN_S = @LN_S@
 MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
 MKINSTALLDIRS = @MKINSTALLDIRS@
 MSGFMT = @MSGFMT@
-NM = @NM@
+OBJDUMP = @OBJDUMP@
 PACKAGE = @PACKAGE@
 POFILES = @POFILES@
 POSUB = @POSUB@
@@ -104,7 +103,6 @@ RANLIB = @RANLIB@
 TDEFINES = @TDEFINES@
 USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
 USE_NLS = @USE_NLS@
-USE_SYMBOL_UNDERSCORE = @USE_SYMBOL_UNDERSCORE@
 VERSION = @VERSION@
 WIN32LDFLAGS = @WIN32LDFLAGS@
 WIN32LIBADD = @WIN32LIBADD@
diff --git a/bfd/po/POTFILES.in b/bfd/po/POTFILES.in
index 008f987..51a980b 100644
--- a/bfd/po/POTFILES.in
+++ b/bfd/po/POTFILES.in
@@ -12,6 +12,7 @@ aoutf1.h
 aoutx.h
 archive.c
 archures.c
+armnetbsd.c
 bfd.c
 binary.c
 bout.c
@@ -61,6 +62,7 @@ cpu-fr30.c
 cpu-h8300.c
 cpu-h8500.c
 cpu-hppa.c
+cpu-i370.c
 cpu-i386.c
 cpu-i860.c
 cpu-i960.c
@@ -72,6 +74,7 @@ cpu-m88k.c
 cpu-mcore.c
 cpu-mips.c
 cpu-ns32k.c
+cpu-pj.c
 cpu-powerpc.c
 cpu-rs6000.c
 cpu-sh.c
@@ -84,6 +87,7 @@ cpu-w65.c
 cpu-we32k.c
 cpu-z8k.c
 demo64.c
+dwarf1.c
 dwarf2.c
 ecoff.c
 ecofflink.c
@@ -93,12 +97,12 @@ elf-m10200.c
 elf-m10300.c
 elf.c
 elf32-arc.c
+elf32-arm.h
 elf32-d10v.c
 elf32-d30v.c
 elf32-fr30.c
 elf32-gen.c
-elf32-hppa.c
-elf32-hppa.h
+elf32-i370.c
 elf32-i386.c
 elf32-i860.c
 elf32-i960.c
@@ -107,6 +111,7 @@ elf32-m68k.c
 elf32-m88k.c
 elf32-mcore.c
 elf32-mips.c
+elf32-pj.c
 elf32-ppc.c
 elf32-sh.c
 elf32-sparc.c
@@ -120,14 +125,18 @@ elf64.c
 elfarm-nabi.c
 elfarm-oabi.c
 elfcode.h
+elfcore.h
 elflink.c
+elflink.h
+epoc-pe-arm.c
+epoc-pei-arm.c
 format.c
+freebsd.h
 genlink.h
 go32stub.h
 hash.c
 hp300bsd.c
 hp300hpux.c
-hppa_stubs.h
 hpux-core.c
 i386aout.c
 i386bsd.c
@@ -152,6 +161,7 @@ libhppa.h
 libieee.h
 libnlm.h
 liboasys.h
+libpei.h
 linker.c
 lynx-core.c
 m68k4knetbsd.c
@@ -171,6 +181,7 @@ nlm32-sparc.c
 nlm32.c
 nlm64.c
 nlmcode.h
+nlmswap.h
 ns32k.h
 ns32knetbsd.c
 oasys.c
@@ -185,6 +196,8 @@ pei-arm.c
 pei-i386.c
 pei-mcore.c
 pei-ppc.c
+peicode.h
+peigen.c
 ppcboot.c
 reloc.c
 reloc16.c
diff --git a/bfd/po/bfd.pot b/bfd/po/bfd.pot
index f4cda19..b423792 100644
--- a/bfd/po/bfd.pot
+++ b/bfd/po/bfd.pot
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 1999-06-03 02:55-0700\n"
+"POT-Creation-Date: 2000-02-25 22:13-0500\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -14,27 +14,27 @@ msgstr ""
 "Content-Type: text/plain; charset=CHARSET\n"
 "Content-Transfer-Encoding: ENCODING\n"
 
-#: aout-adobe.c:182
+#: aout-adobe.c:183
 #, c-format
 msgid "%s: Unknown section type in a.out.adobe file: %x\n"
 msgstr ""
 
-#: aoutx.h:1237 aoutx.h:1651
+#: aoutx.h:1244 aoutx.h:1658
 #, c-format
 msgid "%s: can not represent section `%s' in a.out object file format"
 msgstr ""
 
-#: aoutx.h:1621
+#: aoutx.h:1628
 #, c-format
 msgid ""
 "%s: can not represent section for symbol `%s' in a.out object file format"
 msgstr ""
 
-#: aoutx.h:1623
+#: aoutx.h:1630
 msgid "*unknown*"
 msgstr ""
 
-#: aoutx.h:3667
+#: aoutx.h:3674
 #, c-format
 msgid "%s: relocateable link from %s to %s not supported"
 msgstr ""
@@ -133,28 +133,42 @@ msgstr ""
 msgid "bfd assertion fail %s:%d"
 msgstr ""
 
+#: bfd.c:697
+#, c-format
+msgid "BFD internal error, aborting at %s line %d in %s\n"
+msgstr ""
+
+#: bfd.c:701
+#, c-format
+msgid "BFD internal error, aborting at %s line %d\n"
+msgstr ""
+
+#: bfd.c:703
+msgid "Please report this bug.\n"
+msgstr ""
+
 #: binary.c:298
 #, c-format
 msgid "Warning: Writing section `%s' to huge (ie negative) file offset 0x%lx."
 msgstr ""
 
-#: coff-a29k.c:121
+#: coff-a29k.c:122
 msgid "Missing IHCONST"
 msgstr ""
 
-#: coff-a29k.c:181
+#: coff-a29k.c:182
 msgid "Missing IHIHALF"
 msgstr ""
 
-#: coff-a29k.c:213
+#: coff-a29k.c:214
 msgid "Unrecognized reloc"
 msgstr ""
 
-#: coff-a29k.c:406
+#: coff-a29k.c:427
 msgid "missing IHCONST reloc"
 msgstr ""
 
-#: coff-a29k.c:497
+#: coff-a29k.c:518
 msgid "missing IHIHALF reloc"
 msgstr ""
 
@@ -162,141 +176,146 @@ msgstr ""
 msgid "GP relative relocation used when GP not defined"
 msgstr ""
 
-#: coff-alpha.c:1486 elf64-alpha.c:4051
+#: coff-alpha.c:1486 elf64-alpha.c:3984
 msgid "using multiple gp values"
 msgstr ""
 
-#: coff-alpha.c:1992 coff-mips.c:1435 elf32-mips.c:4924
+#: coff-alpha.c:1992 coff-mips.c:1435
 msgid "GP relative relocation when GP not defined"
 msgstr ""
 
-#: coff-arm.c:884
+#: coff-arm.c:895 elf32-arm.h:258
 #, c-format
 msgid "%s: unable to find THUMB glue '%s' for `%s'"
 msgstr ""
 
-#: coff-arm.c:913
+#: coff-arm.c:924 elf32-arm.h:291
 #, c-format
 msgid "%s: unable to find ARM glue '%s' for `%s'"
 msgstr ""
 
-#: coff-arm.c:1188 coff-arm.c:1282
+#: coff-arm.c:1199 coff-arm.c:1293 elf32-arm.h:857 elf32-arm.h:955
 #, c-format
 msgid "%s(%s): warning: interworking not enabled."
 msgstr ""
 
-#: coff-arm.c:1192
+#: coff-arm.c:1203 elf32-arm.h:958
 #, c-format
 msgid "  first occurrence: %s: arm call to thumb"
 msgstr ""
 
-#: coff-arm.c:1286
+#: coff-arm.c:1297 elf32-arm.h:860
 #, c-format
 msgid "  first occurrence: %s: thumb call to arm"
 msgstr ""
 
-#: coff-arm.c:1289
+#: coff-arm.c:1300
 msgid "  consider relinking with --support-old-code enabled"
 msgstr ""
 
-#: coff-arm.c:1575 coff-tic80.c:682 cofflink.c:2722
+#: coff-arm.c:1586 coff-tic80.c:682 cofflink.c:2980
 #, c-format
 msgid "%s: bad reloc address 0x%lx in section `%s'"
 msgstr ""
 
-#: coff-arm.c:2036
+#: coff-arm.c:1923
+#, c-format
+msgid "%s: illegal symbol index in reloc: %d"
+msgstr ""
+
+#: coff-arm.c:2050
 #, c-format
 msgid "%s: ERROR: compiled for APCS-%d whereas target %s uses APCS-%d"
 msgstr ""
 
-#: coff-arm.c:2051
+#: coff-arm.c:2065
 #, c-format
 msgid ""
 "%s: ERROR: passes floats in float registers whereas target %s uses integer "
 "registers"
 msgstr ""
 
-#: coff-arm.c:2054
+#: coff-arm.c:2068
 #, c-format
 msgid ""
 "%s: ERROR: passes floats in integer registers whereas target %s uses float "
 "registers"
 msgstr ""
 
-#: coff-arm.c:2069
+#: coff-arm.c:2083
 #, c-format
 msgid ""
 "%s: ERROR: compiled as position independent code, whereas target %s is "
 "absolute position"
 msgstr ""
 
-#: coff-arm.c:2072
+#: coff-arm.c:2086
 #, c-format
 msgid ""
 "%s: ERROR: compiled as absolute position code, whereas target %s is position "
 "independent"
 msgstr ""
 
-#: coff-arm.c:2101
+#: coff-arm.c:2115
 #, c-format
 msgid "Warning: input file %s supports interworking, whereas %s does not."
 msgstr ""
 
-#: coff-arm.c:2104
+#: coff-arm.c:2118
 #, c-format
 msgid "Warning: input file %s does not support interworking, whereas %s does."
 msgstr ""
 
-#: coff-arm.c:2132
+#: coff-arm.c:2146
 #, c-format
 msgid "private flags = %x:"
 msgstr ""
 
-#: coff-arm.c:2140
+#: coff-arm.c:2154 elf32-arm.h:2088
 msgid " [floats passed in float registers]"
 msgstr ""
 
-#: coff-arm.c:2142
+#: coff-arm.c:2156 elf32-arm.h:2090
 msgid " [floats passed in integer registers]"
 msgstr ""
 
-#: coff-arm.c:2145
+#: coff-arm.c:2159 elf32-arm.h:2093
 msgid " [position independent]"
 msgstr ""
 
-#: coff-arm.c:2147
+#: coff-arm.c:2161 elf32-arm.h:2095
 msgid " [absolute position]"
 msgstr ""
 
-#: coff-arm.c:2151
+#: coff-arm.c:2165
 msgid " [interworking flag not initialised]"
 msgstr ""
 
-#: coff-arm.c:2153
+#: coff-arm.c:2167
 msgid " [interworking supported]"
 msgstr ""
 
-#: coff-arm.c:2155
+#: coff-arm.c:2169
 msgid " [interworking not supported]"
 msgstr ""
 
-#: coff-arm.c:2204
+#: coff-arm.c:2218
 #, c-format
 msgid ""
 "Warning: Not setting interworking flag of %s, since it has already been "
 "specified as non-interworking"
 msgstr ""
 
-#: coff-arm.c:2208
+#: coff-arm.c:2222
 #, c-format
 msgid "Warning: Clearing the interworking flag of %s due to outside request"
 msgstr ""
 
-#: coff-i960.c:135 coff-i960.c:484
+#: coff-i960.c:136 coff-i960.c:485
 msgid "uncertain calling convention for non-COFF symbol"
 msgstr ""
 
-#: coff-mips.c:875 elf32-mips.c:1136
+#: coff-mips.c:875 elf32-mips.c:1322
 msgid "GP relative relocation when _gp not defined"
 msgstr ""
 
@@ -324,293 +343,410 @@ msgstr ""
 msgid "ignoring reloc %s\n"
 msgstr ""
 
-#: coffcode.h:3441
+#: coffcode.h:3928
 #, c-format
 msgid "%s: warning: illegal symbol index %ld in line numbers"
 msgstr ""
 
-#: coffcode.h:3455
+#: coffcode.h:3942
 #, c-format
 msgid "%s: warning: duplicate line number information for `%s'"
 msgstr ""
 
-#: coffcode.h:3781
+#: coffcode.h:4297
 #, c-format
 msgid "%s: Unrecognized storage class %d for %s symbol `%s'"
 msgstr ""
 
-#: coffcode.h:3965
+#: coffcode.h:4428
+#, c-format
+msgid "warning: %s: local symbol `%s' has no section"
+msgstr ""
+
+#: coffcode.h:4541
 #, c-format
 msgid "%s: warning: illegal symbol index %ld in relocs"
 msgstr ""
 
-#: coffcode.h:4003
+#: coffcode.h:4579
 #, c-format
 msgid "%s: illegal relocation type %d at address 0x%lx"
 msgstr ""
 
-#: coffgen.c:1607
+#: coffgen.c:1613
 #, c-format
 msgid "%s: bad string table size %lu"
 msgstr ""
 
-#: cofflink.c:423
+#: coffgen.c:2076
+#, c-format
+msgid "AUX tagndx %ld ttlsiz 0x%lx lnnos %ld next %ld"
+msgstr ""
+
+#: cofflink.c:518 elflink.h:1568
 #, c-format
 msgid "Warning: type of symbol `%s' changed from %d to %d in %s"
 msgstr ""
 
-#: cofflink.c:2093
+#: cofflink.c:2285
 #, c-format
 msgid "%s: relocs in section `%s', but it has no contents"
 msgstr ""
 
-#: coffswap.h:888
+#: cofflink.c:2619 coffswap.h:904
 #, c-format
-msgid "%s: warning: %s: line number overflow: 0x%lx > 0xffff"
+msgid "%s: %s: reloc overflow: 0x%lx > 0xffff"
 msgstr ""
 
-#: coffswap.h:901
+#: cofflink.c:2628 coffswap.h:891
 #, c-format
-msgid "%s: %s: reloc overflow: 0x%lx > 0xffff"
+msgid "%s: warning: %s: line number overflow: 0x%lx > 0xffff"
 msgstr ""
 
-#: dwarf2.c:420
+#: dwarf2.c:429
 msgid "Dwarf Error: Can't find .debug_abbrev section."
 msgstr ""
 
-#: dwarf2.c:438
+#: dwarf2.c:447
 #, c-format
 msgid "Dwarf Error: Abbrev offset (%u) bigger than abbrev size (%u)."
 msgstr ""
 
-#: dwarf2.c:614
+#: dwarf2.c:627
 #, c-format
 msgid "Dwarf Error: Invalid or unhandled FORM value: %d."
 msgstr ""
 
-#: dwarf2.c:687
+#: dwarf2.c:700
 msgid "Dwarf Error: mangled line number section (bad file number)."
 msgstr ""
 
-#: dwarf2.c:738
+#: dwarf2.c:791
 msgid "Dwarf Error: Can't find .debug_line section."
 msgstr ""
 
-#: dwarf2.c:903
+#: dwarf2.c:963
 msgid "Dwarf Error: mangled line number section."
 msgstr ""
 
-#: dwarf2.c:1097 dwarf2.c:1244
+#: dwarf2.c:1151 dwarf2.c:1307
 #, c-format
 msgid "Dwarf Error: Could not find abbrev number %d."
 msgstr ""
 
-#: dwarf2.c:1205
+#: dwarf2.c:1268
 #, c-format
 msgid ""
 "Dwarf Error: found dwarf version '%hu', this reader only handles version 2 "
 "information."
 msgstr ""
 
-#: dwarf2.c:1212
+#: dwarf2.c:1275
 #, c-format
 msgid ""
 "Dwarf Error: found address size '%u', this reader can not handle sizes "
 "greater than '%u'."
 msgstr ""
 
-#: dwarf2.c:1235
+#: dwarf2.c:1298
 #, c-format
 msgid "Dwarf Error: Bad abbrev number: %d."
 msgstr ""
 
-#: ecoff.c:1308
+#: ecoff.c:1325
 #, c-format
 msgid "Unknown basic type %d"
 msgstr ""
 
-#: ecoff.c:1580
+#: ecoff.c:1597
 #, c-format
 msgid ""
 "\n"
 "      End+1 symbol: %ld"
 msgstr ""
 
-#: ecoff.c:1587 ecoff.c:1590
+#: ecoff.c:1604 ecoff.c:1607
 #, c-format
 msgid ""
 "\n"
 "      First symbol: %ld"
 msgstr ""
 
-#: ecoff.c:1602
+#: ecoff.c:1619
 #, c-format
 msgid ""
 "\n"
 "      End+1 symbol: %-7ld   Type:  %s"
 msgstr ""
 
-#: ecoff.c:1609
+#: ecoff.c:1626
 #, c-format
 msgid ""
 "\n"
 "      Local symbol: %ld"
 msgstr ""
 
-#: ecoff.c:1617
+#: ecoff.c:1634
 #, c-format
 msgid ""
 "\n"
 "      struct; End+1 symbol: %ld"
 msgstr ""
 
-#: ecoff.c:1622
+#: ecoff.c:1639
 #, c-format
 msgid ""
 "\n"
 "      union; End+1 symbol: %ld"
 msgstr ""
 
-#: ecoff.c:1627
+#: ecoff.c:1644
 #, c-format
 msgid ""
 "\n"
 "      enum; End+1 symbol: %ld"
 msgstr ""
 
-#: ecoff.c:1633
+#: ecoff.c:1650
 #, c-format
 msgid ""
 "\n"
 "      Type: %s"
 msgstr ""
 
-#: elf-m10200.c:455 elf-m10300.c:667 elf32-d10v.c:490 elf32-fr30.c:650
-#: elf32-m32r.c:1157 elf32-v850.c:1674
+#: elf-m10200.c:455 elf-m10300.c:670 elf32-arm.h:1852 elf32-d10v.c:493
+#: elf32-fr30.c:650 elf32-m32r.c:1157 elf32-v850.c:1677
 msgid "internal error: out of range error"
 msgstr ""
 
-#: elf-m10200.c:459 elf-m10300.c:671 elf32-d10v.c:494 elf32-fr30.c:654
-#: elf32-m32r.c:1161 elf32-v850.c:1678
+#: elf-m10200.c:459 elf-m10300.c:674 elf32-arm.h:1856 elf32-d10v.c:497
+#: elf32-fr30.c:654 elf32-m32r.c:1161 elf32-v850.c:1681
 msgid "internal error: unsupported relocation error"
 msgstr ""
 
-#: elf-m10200.c:463 elf-m10300.c:675 elf32-d10v.c:498 elf32-m32r.c:1165
+#: elf-m10200.c:463 elf-m10300.c:678 elf32-arm.h:1860 elf32-d10v.c:501
+#: elf32-m32r.c:1165
 msgid "internal error: dangerous error"
 msgstr ""
 
-#: elf-m10200.c:467 elf-m10300.c:679 elf32-d10v.c:502 elf32-fr30.c:662
-#: elf32-m32r.c:1169 elf32-v850.c:1698
+#: elf-m10200.c:467 elf-m10300.c:682 elf32-arm.h:1864 elf32-d10v.c:505
+#: elf32-fr30.c:662 elf32-m32r.c:1169 elf32-v850.c:1701
 msgid "internal error: unknown error"
 msgstr ""
 
-#: elf.c:320
+#: elf.c:323
 #, c-format
 msgid "%s: invalid string offset %u >= %lu for section `%s'"
 msgstr ""
 
-#: elf.c:543
+#: elf.c:546
 msgid ""
 "\n"
 "Program Header:\n"
 msgstr ""
 
-#: elf.c:591
+#: elf.c:594
 msgid ""
 "\n"
 "Dynamic Section:\n"
 msgstr ""
 
-#: elf.c:693
+#: elf.c:696
 msgid ""
 "\n"
 "Version definitions:\n"
 msgstr ""
 
-#: elf.c:716
+#: elf.c:719
 msgid ""
 "\n"
 "Version References:\n"
 msgstr ""
 
-#: elf.c:721
+#: elf.c:724
 #, c-format
 msgid "  required from %s:\n"
 msgstr ""
 
-#: elf.c:1887
+#: elf.c:1286
+#, c-format
+msgid "%s: invalid link %lu for reloc section %s (index %u)"
+msgstr ""
+
+#: elf.c:2045
 #, c-format
 msgid ""
 "creating section symbol, name = %s, value = 0x%.8lx, index = %d, section = "
 "0x%.8lx\n"
 msgstr ""
 
-#: elf.c:2490
+#: elf.c:2648
 #, c-format
 msgid "%s: Not enough room for program headers (allocated %u, need %u)"
 msgstr ""
 
-#: elf.c:2593
+#: elf.c:2747
 #, c-format
 msgid "%s: Not enough room for program headers, try linking with -N"
 msgstr ""
 
-#: elf.c:2719
+#: elf.c:2873
 #, c-format
 msgid "Error: First section in segment (%s) starts at 0x%x"
 msgstr ""
 
-#: elf.c:2722
+#: elf.c:2876
 #, c-format
 msgid "       whereas segment starts at 0x%x"
 msgstr ""
 
-#: elf.c:2992
+#: elf.c:3146
 #, c-format
 msgid "%s: warning: allocated section `%s' not in segment"
 msgstr ""
 
-#: elf.c:3365
+#: elf.c:3525
 #, c-format
 msgid "%s: symbol `%s' required but not present"
 msgstr ""
 
-#: elf.c:3374
+#: elf.c:3534
 #, c-format
 msgid ""
 "elf_symbol_from_bfd_symbol 0x%.8lx, name = %s, sym num = %d, flags = "
 "0x%.8lx%s\n"
 msgstr ""
 
-#: elf.c:3516
+#: elf.c:3676
 #, c-format
 msgid "%s: warning: Empty loadable segment detected\n"
 msgstr ""
 
-#: elf.c:4792
+#: elf.c:4952
 #, c-format
 msgid "%s: unsupported relocation type %s"
 msgstr ""
 
-#: elf32-fr30.c:658 elf32-v850.c:1682
-msgid "internal error: dangerous relocation"
+#: elf32-arm.h:1787 elf32-i386.c:1299 elf32-ppc.c:3092
+#, c-format
+msgid ""
+"%s: warning: unresolvable relocation against symbol `%s' from %s section"
+msgstr ""
+
+#: elf32-arm.h:1890
+#, c-format
+msgid ""
+"Warning: Not setting interwork flag of %s since it has already been "
+"specified as non-interworking"
 msgstr ""
 
-#: elf32-hppa.c:1215
-msgid "Unsupported call to hppa_elf_reloc"
+#: elf32-arm.h:1894
+#, c-format
+msgid "Warning: Clearing the interwork flag of %s due to outside request"
 msgstr ""
 
-#: elf32-i386.c:1293
+#: elf32-arm.h:1942
 #, c-format
 msgid ""
-"%s: warning: unresolvable relocation against symbol `%s' from %s section"
+"Warning: Clearing the interwork flag in %s because non-interworking code in "
+"%s has been linked with it"
+msgstr ""
+
+#: elf32-arm.h:1976
+#, c-format
+msgid "%s: compiled for a %s endian system and target is %s endian"
+msgstr ""
+
+#: elf32-arm.h:2022
+#, c-format
+msgid "Error: %s compiled for APCS-%d, whereas %s is compiled for APCS-%d"
+msgstr ""
+
+#: elf32-arm.h:2030
+#, c-format
+msgid ""
+"Error: %s passes floats in %s registers, whereas %s passes them in %s "
+"registers"
+msgstr ""
+
+#: elf32-arm.h:2033 elf32-arm.h:2035
+msgid "float"
+msgstr ""
+
+#: elf32-arm.h:2033 elf32-arm.h:2035
+msgid "integer"
+msgstr ""
+
+#: elf32-arm.h:2038
+#, c-format
+msgid "Error: %s is compiled as position %s code, whereas %s is not"
+msgstr ""
+
+#: elf32-arm.h:2041
+msgid "independent"
+msgstr ""
+
+#: elf32-arm.h:2041
+msgid "dependent"
+msgstr ""
+
+#: elf32-arm.h:2047
+#, c-format
+msgid "Warning: %s %s interworking, whereas %s %s"
+msgstr ""
+
+#: elf32-arm.h:2050
+msgid "supports"
+msgstr ""
+
+#: elf32-arm.h:2050
+msgid "does not support"
+msgstr ""
+
+#: elf32-arm.h:2052
+msgid "does not"
+msgstr ""
+
+#: elf32-arm.h:2052
+msgid "does"
+msgstr ""
+
+#. Ignore init flag - it may not be set, despite the flags field containing valid data.
+#: elf32-arm.h:2075 elf32-m68k.c:430 elf32-mips.c:2525
+#, c-format
+msgid "private flags = %lx:"
+msgstr ""
+
+#: elf32-arm.h:2078
+msgid " [interworking enabled]"
+msgstr ""
+
+#: elf32-arm.h:2080
+msgid " [interworking not enabled]"
+msgstr ""
+
+#: elf32-arm.h:2083
+msgid " [APCS-26]"
+msgstr ""
+
+#: elf32-arm.h:2085
+msgid " [APCS-32]"
+msgstr ""
+
+#: elf32-fr30.c:658 elf32-v850.c:1685
+msgid "internal error: dangerous relocation"
+msgstr ""
+
+#: elf32-i386.c:239
+#, c-format
+msgid "%s: invalid relocation type %d"
 msgstr ""
 
 #: elf32-m32r.c:808
 msgid "SDA relocation when _SDA_BASE_ not defined"
 msgstr ""
 
-#: elf32-m32r.c:892 elf32-ppc.c:3071
+#: elf32-m32r.c:892 elf32-ppc.c:2963
 #, c-format
 msgid "%s: unknown relocation type %d"
 msgstr ""
@@ -620,272 +756,274 @@ msgstr ""
 msgid "%s: The target (%s) of an %s relocation is in the wrong section (%s)"
 msgstr ""
 
-#: elf32-m32r.c:1900
+#: elf32-m32r.c:1902
 #, c-format
 msgid "%s: Instruction set mismatch with previous modules"
 msgstr ""
 
-#: elf32-m32r.c:1923
+#: elf32-m32r.c:1925
 #, c-format
 msgid "private flags = %lx"
 msgstr ""
 
-#: elf32-m32r.c:1928
+#: elf32-m32r.c:1930
 msgid ": m32r instructions"
 msgstr ""
 
-#. Ignore init flag - it may not be set, despite the flags field containing valid data.
-#: elf32-m68k.c:432 elf32-mips.c:2300
-#, c-format
-msgid "private flags = %lx:"
+#: elf32-m32r.c:1931
+msgid ": m32rx instructions"
 msgstr ""
 
-#: elf32-m68k.c:435
+#: elf32-m68k.c:433
 msgid " [cpu32]"
 msgstr ""
 
-#: elf32-mcore.c:330
+#: elf32-mcore.c:329
 #, c-format
 msgid "%s: compiled for a %s endian system and target is %s endian.\n"
 msgstr ""
 
-#: elf32-mcore.c:374 elf32-mcore.c:502
+#: elf32-mcore.c:377 elf32-mcore.c:504
 #, c-format
 msgid "%s: Relocation %s (%d) is not currently supported.\n"
 msgstr ""
 
-#: elf32-mcore.c:461
+#: elf32-mcore.c:463
 #, c-format
 msgid "%s: Unknown relocation type %d\n"
 msgstr ""
 
-#: elf32-mips.c:1296
+#: elf32-mips.c:1481
 msgid "32bits gp relative relocation occurs for an external symbol"
 msgstr ""
 
-#: elf32-mips.c:1445
+#: elf32-mips.c:1630
 #, c-format
 msgid "Linking mips16 objects into %s format is not supported"
 msgstr ""
 
-#: elf32-mips.c:2141 elf32-ppc.c:1410
+#: elf32-mips.c:2360 elf32-ppc.c:1408
 #, c-format
 msgid "%s: compiled for a big endian system and target is little endian"
 msgstr ""
 
-#: elf32-mips.c:2143 elf32-ppc.c:1412
+#: elf32-mips.c:2362 elf32-ppc.c:1410
 #, c-format
 msgid "%s: compiled for a little endian system and target is big endian"
 msgstr ""
 
-#: elf32-mips.c:2190
+#: elf32-mips.c:2411
 #, c-format
 msgid "%s: linking PIC files with non-PIC files"
 msgstr ""
 
-#: elf32-mips.c:2200
+#: elf32-mips.c:2421
 #, c-format
 msgid "%s: linking abicalls files with non-abicalls files"
 msgstr ""
 
-#: elf32-mips.c:2230
+#: elf32-mips.c:2451
 #, c-format
 msgid "%s: ISA mismatch (-mips%d) with previous modules (-mips%d)"
 msgstr ""
 
-#: elf32-mips.c:2239
+#: elf32-mips.c:2460
 #, c-format
 msgid "%s: ISA mismatch (%d) with previous modules (%d)"
 msgstr ""
 
-#: elf32-mips.c:2258
+#: elf32-mips.c:2483
 #, c-format
 msgid "%s: ABI mismatch: linking %s module with previous %s modules"
 msgstr ""
 
-#: elf32-mips.c:2272 elf32-ppc.c:1479 elf64-sparc.c:2199
+#: elf32-mips.c:2497 elf32-ppc.c:1477 elf64-sparc.c:2827
 #, c-format
 msgid "%s: uses different e_flags (0x%lx) fields than previous modules (0x%lx)"
 msgstr ""
 
-#: elf32-mips.c:2303
+#: elf32-mips.c:2528
 msgid " [abi=O32]"
 msgstr ""
 
-#: elf32-mips.c:2305
+#: elf32-mips.c:2530
 msgid " [abi=O64]"
 msgstr ""
 
-#: elf32-mips.c:2307
+#: elf32-mips.c:2532
 msgid " [abi=EABI32]"
 msgstr ""
 
-#: elf32-mips.c:2309
+#: elf32-mips.c:2534
 msgid " [abi=EABI64]"
 msgstr ""
 
-#: elf32-mips.c:2311
+#: elf32-mips.c:2536
 msgid " [abi unknown]"
 msgstr ""
 
-#: elf32-mips.c:2313
+#: elf32-mips.c:2538
+msgid " [abi=N32]"
+msgstr ""
+
+#: elf32-mips.c:2540
+msgid " [abi=64]"
+msgstr ""
+
+#: elf32-mips.c:2542
 msgid " [no abi set]"
 msgstr ""
 
-#: elf32-mips.c:2316
+#: elf32-mips.c:2545
 msgid " [mips1]"
 msgstr ""
 
-#: elf32-mips.c:2318
+#: elf32-mips.c:2547
 msgid " [mips2]"
 msgstr ""
 
-#: elf32-mips.c:2320
+#: elf32-mips.c:2549
 msgid " [mips3]"
 msgstr ""
 
-#: elf32-mips.c:2322
+#: elf32-mips.c:2551
 msgid " [mips4]"
 msgstr ""
 
-#: elf32-mips.c:2324
+#: elf32-mips.c:2553
 msgid " [unknown ISA]"
 msgstr ""
 
-#: elf32-mips.c:2327
+#: elf32-mips.c:2556
 msgid " [32bitmode]"
 msgstr ""
 
-#: elf32-mips.c:2329
+#: elf32-mips.c:2558
 msgid " [not 32bitmode]"
 msgstr ""
 
-#: elf32-mips.c:3897
+#: elf32-mips.c:4161
 msgid "static procedure (no name)"
 msgstr ""
 
-#: elf32-mips.c:4470 elf64-alpha.c:4425
+#: elf32-mips.c:4778 elf64-alpha.c:4358
 #, c-format
 msgid "%s: illegal section name `%s'"
 msgstr ""
 
-#: elf32-mips.c:4777
-msgid "more got entries are needed for hipage relocations"
-msgstr ""
-
-#: elf32-mips.c:5081
-msgid "_gp_disp used when GP not defined"
+#: elf32-mips.c:5305
+msgid "not enough GOT space for local GOT entries"
 msgstr ""
 
-#: elf32-mips.c:5498
+#: elf32-mips.c:6363
 #, c-format
-msgid "%s: %s+0x%lx: jump to mips16 routine which is not jal"
+msgid "%s: %s+0x%lx: jump to stub routine which is not jal"
 msgstr ""
 
-#: elf32-mips.c:6253
+#: elf32-mips.c:7342
 #, c-format
 msgid "%s: CALL16 reloc at 0x%lx not against global symbol"
 msgstr ""
 
-#: elf32-ppc.c:1445
+#: elf32-ppc.c:1443
 #, c-format
 msgid ""
 "%s: compiled with -mrelocatable and linked with modules compiled normally"
 msgstr ""
 
-#: elf32-ppc.c:1453
+#: elf32-ppc.c:1451
 #, c-format
 msgid ""
 "%s: compiled normally and linked with modules compiled with -mrelocatable"
 msgstr ""
 
-#: elf32-ppc.c:1580
+#: elf32-ppc.c:1578
 #, c-format
 msgid "%s: Unknown special linker type %d"
 msgstr ""
 
-#: elf32-ppc.c:2311 elf32-ppc.c:2345 elf32-ppc.c:2380
+#: elf32-ppc.c:2251 elf32-ppc.c:2285 elf32-ppc.c:2320
 #, c-format
 msgid "%s: relocation %s cannot be used when making a shared object"
 msgstr ""
 
-#: elf32-ppc.c:3216
+#: elf32-ppc.c:3121
 #, c-format
 msgid "%s: unknown relocation type %d for symbol %s"
 msgstr ""
 
-#: elf32-ppc.c:3583 elf32-ppc.c:3605 elf32-ppc.c:3654
+#: elf32-ppc.c:3488 elf32-ppc.c:3510 elf32-ppc.c:3559
 #, c-format
 msgid ""
 "%s: The target (%s) of a %s relocation is in the wrong output section (%s)"
 msgstr ""
 
-#: elf32-ppc.c:3720
+#: elf32-ppc.c:3625
 #, c-format
 msgid "%s: Relocation %s is not yet supported for symbol %s."
 msgstr ""
 
-#: elf32-sh.c:673
+#: elf32-sh.c:681
 #, c-format
 msgid "%s: 0x%lx: warning: bad R_SH_USES offset"
 msgstr ""
 
-#: elf32-sh.c:685
+#: elf32-sh.c:693
 #, c-format
 msgid "%s: 0x%lx: warning: R_SH_USES points to unrecognized insn 0x%x"
 msgstr ""
 
-#: elf32-sh.c:702
+#: elf32-sh.c:710
 #, c-format
 msgid "%s: 0x%lx: warning: bad R_SH_USES load offset"
 msgstr ""
 
-#: elf32-sh.c:717
+#: elf32-sh.c:725
 #, c-format
 msgid "%s: 0x%lx: warning: could not find expected reloc"
 msgstr ""
 
-#: elf32-sh.c:754
+#: elf32-sh.c:762
 #, c-format
 msgid "%s: 0x%lx: warning: symbol in unexpected section"
 msgstr ""
 
-#: elf32-sh.c:876
+#: elf32-sh.c:884
 #, c-format
 msgid "%s: 0x%lx: warning: could not find expected COUNT reloc"
 msgstr ""
 
-#: elf32-sh.c:885
+#: elf32-sh.c:893
 #, c-format
 msgid "%s: 0x%lx: warning: bad count"
 msgstr ""
 
-#: elf32-sh.c:1271 elf32-sh.c:1608
+#: elf32-sh.c:1279 elf32-sh.c:1666
 #, c-format
 msgid "%s: 0x%lx: fatal: reloc overflow while relaxing"
 msgstr ""
 
-#: elf32-sparc.c:1502 elf64-sparc.c:1577
+#: elf32-sparc.c:1484 elf64-sparc.c:2240
 #, c-format
 msgid "%s: probably compiled without -fPIC?"
 msgstr ""
 
-#: elf32-sparc.c:1923
+#: elf32-sparc.c:1854
 #, c-format
 msgid "%s: compiled for a v8plus system and target is v8"
 msgstr ""
 
-#: elf32-sparc.c:1932
+#: elf32-sparc.c:1863
 #, c-format
 msgid "%s: compiled for a v8plusa system and target is v8plus"
 msgstr ""
 
-#: elf32-sparc.c:1940
+#: elf32-sparc.c:1871
 #, c-format
 msgid "%s: compiled for a 64 bit system and target is 32 bit"
 msgstr ""
 
-#: elf32-sparc.c:1952
+#: elf32-sparc.c:1883
 #, c-format
 msgid "%s: linking little endian files with big endian files"
 msgstr ""
@@ -919,90 +1057,145 @@ msgid ""
 "Variable `%s' cannot be in both zero and tiny data regions simultaneously"
 msgstr ""
 
-#: elf32-v850.c:1071
+#: elf32-v850.c:1070
 msgid "FAILED to find previous HI16 reloc\n"
 msgstr ""
 
-#: elf32-v850.c:1686
+#: elf32-v850.c:1689
 msgid "could not locate special linker symbol __gp"
 msgstr ""
 
-#: elf32-v850.c:1690
+#: elf32-v850.c:1693
 msgid "could not locate special linker symbol __ep"
 msgstr ""
 
-#: elf32-v850.c:1694
+#: elf32-v850.c:1697
 msgid "could not locate special linker symbol __ctbp"
 msgstr ""
 
-#: elf32-v850.c:1880
+#: elf32-v850.c:1886
 #, c-format
 msgid "%s: Architecture mismatch with previous modules"
 msgstr ""
 
-#: elf32-v850.c:1899
+#: elf32-v850.c:1905
 #, c-format
 msgid "private flags = %lx: "
 msgstr ""
 
-#: elf32-v850.c:1904
+#: elf32-v850.c:1910
 msgid "v850 architecture"
 msgstr ""
 
-#: elf32-v850.c:1905
+#: elf32-v850.c:1911
 msgid "v850e architecture"
 msgstr ""
 
-#: elf32-v850.c:1906
+#: elf32-v850.c:1912
 msgid "v850ea architecture"
 msgstr ""
 
-#: elf64-alpha.c:949
+#: elf64-alpha.c:947
 msgid "GPDISP relocation did not find ldah and lda instructions"
 msgstr ""
 
-#: elf64-alpha.c:2990
+#: elf64-alpha.c:2999
 #, c-format
 msgid "%s: .got subsegment exceeds 64K (size %d)"
 msgstr ""
 
-#: elf64-sparc.c:810
+#: elf64-sparc.c:1248
 #, c-format
 msgid "%s: check_relocs: unhandled reloc type %d"
 msgstr ""
 
-#: elf64-sparc.c:2181
+#: elf64-sparc.c:1285
+msgid "%s: Only registers %%g[2367] can be declared using STT_REGISTER"
+msgstr ""
+
+#: elf64-sparc.c:1305
+msgid ""
+"Register %%g%d used incompatibly: previously declared in %s to %s, in %s "
+"redefined to %s"
+msgstr ""
+
+#: elf64-sparc.c:1328
+#, c-format
+msgid "Symbol `%s' has differing types: previously %s, REGISTER in %s"
+msgstr ""
+
+#: elf64-sparc.c:1374
+#, c-format
+msgid "Symbol `%s' has differing types: REGISTER in %s, %s in %s"
+msgstr ""
+
+#: elf64-sparc.c:2809
 #, c-format
 msgid "%s: linking UltraSPARC specific with HAL specific code"
 msgstr ""
 
-#: elfcode.h:1034
+#: elfcode.h:1061
 #, c-format
 msgid "%s: version count (%ld) does not match symbol count (%ld)"
 msgstr ""
 
-#: elflink.c:318
+#: elflink.c:423
 #, c-format
 msgid "%s: Section %s is already to large to put hole of %ld bytes in"
 msgstr ""
 
-#: i386linux.c:449 m68klinux.c:453 sparclinux.c:451
+#: elflink.h:1388
+#, c-format
+msgid "%s: %s: invalid version %u (max %d)"
+msgstr ""
+
+#: elflink.h:1429
+#, c-format
+msgid "%s: %s: invalid needed version %d"
+msgstr ""
+
+#: elflink.h:1546
+#, c-format
+msgid "Warning: size of symbol `%s' changed from %lu to %lu in %s"
+msgstr ""
+
+#: elflink.h:1790
+#, c-format
+msgid "%s: warning: unexpected redefinition of `%s'"
+msgstr ""
+
+#: elflink.h:3480
+#, c-format
+msgid "warning: type and size of dynamic symbol `%s' are not defined"
+msgstr ""
+
+#: elflink.h:3752
+#, c-format
+msgid "%s: undefined versioned symbol name %s"
+msgstr ""
+
+#: elflink.h:4981
+#, c-format
+msgid "%s: could not find output section %s for input section %s"
+msgstr ""
+
+#: i386linux.c:450 m68klinux.c:454 sparclinux.c:452
 #, c-format
 msgid "Output file requires shared library `%s'\n"
 msgstr ""
 
-#: i386linux.c:457 m68klinux.c:461 sparclinux.c:459
+#: i386linux.c:458 m68klinux.c:462 sparclinux.c:460
 #, c-format
 msgid "Output file requires shared library `%s.so.%s'\n"
 msgstr ""
 
-#: i386linux.c:645 i386linux.c:695 m68klinux.c:652 m68klinux.c:700
-#: sparclinux.c:648 sparclinux.c:698
+#: i386linux.c:646 i386linux.c:696 m68klinux.c:653 m68klinux.c:701
+#: sparclinux.c:649 sparclinux.c:699
 #, c-format
 msgid "Symbol %s not defined for fixups\n"
 msgstr ""
 
-#: i386linux.c:719 m68klinux.c:724 sparclinux.c:722
+#: i386linux.c:720 m68klinux.c:725 sparclinux.c:723
 msgid "Warning: fixup count mismatch\n"
 msgstr ""
 
@@ -1081,16 +1274,16 @@ msgstr ""
 msgid "%s: address 0x%s out of range for Intex Hex file"
 msgstr ""
 
-#: libbfd.c:481
+#: libbfd.c:484
 #, c-format
 msgid "not mapping: data=%lx mapped=%d\n"
 msgstr ""
 
-#: libbfd.c:484
+#: libbfd.c:487
 msgid "not mapping: env var not set\n"
 msgstr ""
 
-#: linker.c:2672
+#: linker.c:2679
 #, c-format
 msgid "Attempt to do relocateable link with %s input and %s output"
 msgstr ""
@@ -1105,6 +1298,312 @@ msgstr ""
 msgid "Unhandled OSF/1 core file section type %d\n"
 msgstr ""
 
+#: peicode.h:395
+#, c-format
+msgid "%s: Import Library Format archives are not currently supported"
+msgstr ""
+
+#: peigen.c:938
+#, c-format
+msgid "%s: line number overflow: 0x%lx > 0xffff"
+msgstr ""
+
+#: peigen.c:950
+#, c-format
+msgid "%s: reloc overflow: 0x%lx > 0xffff"
+msgstr ""
+
+#: peigen.c:963
+msgid "Export Directory [.edata (or where ever we found it)]"
+msgstr ""
+
+#: peigen.c:964
+msgid "Import Directory [parts of .idata]"
+msgstr ""
+
+#: peigen.c:965
+msgid "Resource Directory [.rsrc]"
+msgstr ""
+
+#: peigen.c:966
+msgid "Exception Directory [.pdata]"
+msgstr ""
+
+#: peigen.c:967
+msgid "Security Directory"
+msgstr ""
+
+#: peigen.c:968
+msgid "Base Relocation Directory [.reloc]"
+msgstr ""
+
+#: peigen.c:969
+msgid "Debug Directory"
+msgstr ""
+
+#: peigen.c:970
+msgid "Description Directory"
+msgstr ""
+
+#: peigen.c:971
+msgid "Special Directory"
+msgstr ""
+
+#: peigen.c:972
+msgid "Thread Storage Directory [.tls]"
+msgstr ""
+
+#: peigen.c:973
+msgid "Load Configuration Directory"
+msgstr ""
+
+#: peigen.c:974
+msgid "Bound Import Directory"
+msgstr ""
+
+#: peigen.c:975
+msgid "Import Address Table Directory"
+msgstr ""
+
+#: peigen.c:976 peigen.c:977 peigen.c:978
+msgid "Reserved"
+msgstr ""
+
+#: peigen.c:1022
+msgid ""
+"\n"
+"The import table is the .idata section\n"
+msgstr ""
+
+#: peigen.c:1044
+msgid ""
+"\n"
+"There is an import table, but the section containing it could not be found\n"
+msgstr ""
+
+#: peigen.c:1048
+#, c-format
+msgid ""
+"\n"
+"There is an import table in %s at 0x%lx\n"
+msgstr ""
+
+#: peigen.c:1089
+#, c-format
+msgid ""
+"\n"
+"Function descriptor located at the start address: %04lx\n"
+msgstr ""
+
+#: peigen.c:1092
+#, c-format
+msgid "\tcode-base %08lx toc (loadable/actual) %08lx/%08lx\n"
+msgstr ""
+
+#: peigen.c:1098
+msgid ""
+"\n"
+"No reldata section! Function descriptor not decoded.\n"
+msgstr ""
+
+#: peigen.c:1103
+msgid ""
+"\n"
+"The Import Tables (interpreted .idata section contents)\n"
+msgstr ""
+
+#: peigen.c:1105
+msgid " vma:            Hint    Time      Forward  DLL       First\n"
+msgstr ""
+
+#: peigen.c:1107
+msgid "                 Table   Stamp     Chain    Name      Thunk\n"
+msgstr ""
+
+#: peigen.c:1157
+#, c-format
+msgid ""
+"\n"
+"\tDLL Name: %s\n"
+msgstr ""
+
+#: peigen.c:1161 peigen.c:1224
+msgid "\tvma:  Hint/Ord Member-Name\n"
+msgstr ""
+
+#: peigen.c:1223
+msgid "\tThe Import Address Table (difference found)\n"
+msgstr ""
+
+#: peigen.c:1230
+msgid "\t>>> Ran out of IAT members!\n"
+msgstr ""
+
+#: peigen.c:1248
+msgid "\tThe Import Address Table is identical\n"
+msgstr ""
+
+#: peigen.c:1297
+msgid ""
+"\n"
+"The export table is the .edata section\n"
+msgstr ""
+
+#: peigen.c:1319
+msgid ""
+"\n"
+"There is an export table, but the section containing it could not be found\n"
+msgstr ""
+
+#: peigen.c:1323
+#, c-format
+msgid ""
+"\n"
+"There is an export table in %s at 0x%lx\n"
+msgstr ""
+
+#: peigen.c:1355
+msgid ""
+"\n"
+"The Export Tables (interpreted .edata section contents)\n"
+"\n"
+msgstr ""
+
+#: peigen.c:1358
+#, c-format
+msgid "Export Flags \t\t\t%lx\n"
+msgstr ""
+
+#: peigen.c:1361
+#, c-format
+msgid "Time/Date stamp \t\t%lx\n"
+msgstr ""
+
+#: peigen.c:1364
+#, c-format
+msgid "Major/Minor \t\t\t%d/%d\n"
+msgstr ""
+
+#: peigen.c:1367
+msgid "Name \t\t\t\t"
+msgstr ""
+
+#: peigen.c:1373
+#, c-format
+msgid "Ordinal Base \t\t\t%ld\n"
+msgstr ""
+
+#: peigen.c:1376
+msgid "Number in:\n"
+msgstr ""
+
+#: peigen.c:1379
+#, c-format
+msgid "\tExport Address Table \t\t%lx\n"
+msgstr ""
+
+#: peigen.c:1383
+#, c-format
+msgid "\t[Name Pointer/Ordinal] Table\t%lu\n"
+msgstr ""
+
+#: peigen.c:1386
+msgid "Table Addresses\n"
+msgstr ""
+
+#: peigen.c:1389
+msgid "\tExport Address Table \t\t"
+msgstr ""
+
+#: peigen.c:1394
+msgid "\tName Pointer Table \t\t"
+msgstr ""
+
+#: peigen.c:1399
+msgid "\tOrdinal Table \t\t\t"
+msgstr ""
+
+#: peigen.c:1415
+#, c-format
+msgid ""
+"\n"
+"Export Address Table -- Ordinal Base %ld\n"
+msgstr ""
+
+#: peigen.c:1436
+msgid "Forwarder RVA"
+msgstr ""
+
+#: peigen.c:1444
+msgid "Export RVA"
+msgstr ""
+
+#: peigen.c:1451
+msgid ""
+"\n"
+"[Ordinal/Name Pointer] Table\n"
+msgstr ""
+
+#: peigen.c:1496
+#, c-format
+msgid "Warning, .pdata section size (%ld) is not a multiple of %d\n"
+msgstr ""
+
+#: peigen.c:1500
+msgid ""
+"\n"
+"The Function Table (interpreted .pdata section contents)\n"
+msgstr ""
+
+#: peigen.c:1502
+msgid " vma:\t\tBegin    End      EH       EH       PrologEnd  Exception\n"
+msgstr ""
+
+#: peigen.c:1504
+msgid "     \t\tAddress  Address  Handler  Data     Address    Mask\n"
+msgstr ""
+
+#: peigen.c:1576
+msgid " Register save millicode"
+msgstr ""
+
+#: peigen.c:1579
+msgid " Register restore millicode"
+msgstr ""
+
+#: peigen.c:1582
+msgid " Glue code sequence"
+msgstr ""
+
+#: peigen.c:1628
+msgid ""
+"\n"
+"\n"
+"PE File Base Relocations (interpreted .reloc section contents)\n"
+msgstr ""
+
+#: peigen.c:1663
+#, c-format
+msgid ""
+"\n"
+"Virtual Address: %08lx Chunk size %ld (0x%lx) Number of fixups %ld\n"
+msgstr ""
+
+#: peigen.c:1676
+#, c-format
+msgid "\treloc %4d offset %4x [%4lx] %s"
+msgstr ""
+
+#. The MS dumpbin program reportedly ands with 0xff0f before
+#. printing the characteristics field.  Not sure why.  No reason to
+#. emulate it here.
+#: peigen.c:1715
+#, c-format
+msgid ""
+"\n"
+"Characteristics 0x%x\n"
+msgstr ""
+
 #: ppcboot.c:418
 msgid ""
 "\n"
@@ -1153,7 +1652,7 @@ msgstr ""
 msgid "Partition[%d] length = 0x%.8lx (%ld)\n"
 msgstr ""
 
-#: som.c:5276
+#: som.c:5335
 msgid "som_sizeof_headers unimplemented"
 msgstr ""
 
@@ -1162,33 +1661,48 @@ msgstr ""
 msgid "%s:%d: Unexpected character `%s' in S-record file\n"
 msgstr ""
 
-#: syms.c:922
+#: syms.c:974
 msgid "Unsupported .stab relocation"
 msgstr ""
 
-#: vms-gsd.c:694
+#: vms-gsd.c:357
+#, c-format
+msgid "bfd_make_section (%s) failed"
+msgstr ""
+
+#: vms-gsd.c:371
+#, c-format
+msgid "bfd_set_section_flags (%s, %x) failed"
+msgstr ""
+
+#: vms-gsd.c:407
+#, c-format
+msgid "Size mismatch section %s=%lx, %s=%lx"
+msgstr ""
+
+#: vms-gsd.c:702
 #, c-format
 msgid "unknown gsd/egsd subtype %d"
 msgstr ""
 
-#: vms-hdr.c:407
+#: vms-hdr.c:405
 msgid "Object module NOT error-free !\n"
 msgstr ""
 
-#: vms-misc.c:539
+#: vms-misc.c:541
 #, c-format
 msgid "Stack overflow (%d) in _bfd_vms_push"
 msgstr ""
 
-#: vms-misc.c:558
+#: vms-misc.c:560
 msgid "Stack underflow in _bfd_vms_pop"
 msgstr ""
 
-#: vms-misc.c:929
+#: vms-misc.c:931
 msgid "_bfd_vms_output_counted called with zero bytes"
 msgstr ""
 
-#: vms-misc.c:934
+#: vms-misc.c:936
 msgid "_bfd_vms_output_counted called with too many bytes"
 msgstr ""
 
@@ -1215,7 +1729,7 @@ msgstr ""
 msgid "Unsupported STA cmd %d"
 msgstr ""
 
-#: vms-tir.c:329 vms-tir.c:1289
+#: vms-tir.c:329 vms-tir.c:1287
 #, c-format
 msgid "Reserved STA cmd %d"
 msgstr ""
@@ -1246,7 +1760,7 @@ msgstr ""
 msgid "ETIR_S_C_STO_HINT_PS: not implemented"
 msgstr ""
 
-#: vms-tir.c:544 vms-tir.c:1462
+#: vms-tir.c:544 vms-tir.c:1460
 #, c-format
 msgid "Reserved STO cmd %d"
 msgstr ""
@@ -1271,12 +1785,12 @@ msgstr ""
 msgid "ETIR_S_C_OPR_DFLIT: Not supported"
 msgstr ""
 
-#: vms-tir.c:710 vms-tir.c:1658
+#: vms-tir.c:710 vms-tir.c:1656
 #, c-format
 msgid "Reserved OPR cmd %d"
 msgstr ""
 
-#: vms-tir.c:779 vms-tir.c:1728
+#: vms-tir.c:779 vms-tir.c:1726
 #, c-format
 msgid "Reserved CTL cmd %d"
 msgstr ""
@@ -1302,11 +1816,11 @@ msgstr ""
 #. * arg: -
 #. *
 #.
-#: vms-tir.c:1189
+#: vms-tir.c:1187
 msgid "Stack-from-image not implemented"
 msgstr ""
 
-#: vms-tir.c:1209
+#: vms-tir.c:1207
 msgid "Stack-entry-mask not fully implemented"
 msgstr ""
 
@@ -1319,76 +1833,76 @@ msgstr ""
 #. * compare argument descriptor with symbol argument (ARG$V_PASSMECH)
 #. * and stack TRUE (args match) or FALSE (args dont match) value
 #.
-#: vms-tir.c:1225
+#: vms-tir.c:1223
 msgid "PASSMECH not fully implemented"
 msgstr ""
 
-#: vms-tir.c:1245
+#: vms-tir.c:1243
 msgid "Stack-local-symbol not fully implemented"
 msgstr ""
 
-#: vms-tir.c:1260
+#: vms-tir.c:1258
 msgid "Stack-literal not fully implemented"
 msgstr ""
 
-#: vms-tir.c:1282
+#: vms-tir.c:1280
 msgid "Stack-local-symbol-entry-point-mask not fully implemented"
 msgstr ""
 
-#: vms-tir.c:1458
+#: vms-tir.c:1456
 #, c-format
 msgid "Unimplemented STO cmd %d"
 msgstr ""
 
-#: vms-tir.c:1598
+#: vms-tir.c:1596
 msgid "TIR_S_C_OPR_ASH incomplete"
 msgstr ""
 
-#: vms-tir.c:1612
+#: vms-tir.c:1610
 msgid "TIR_S_C_OPR_USH incomplete"
 msgstr ""
 
-#: vms-tir.c:1626
+#: vms-tir.c:1624
 msgid "TIR_S_C_OPR_ROT incomplete"
 msgstr ""
 
 #.
 #. * redefine symbol to current location
 #.
-#: vms-tir.c:1647
+#: vms-tir.c:1645
 msgid "TIR_S_C_OPR_REDEF not supported"
 msgstr ""
 
 #.
 #. * define a literal
 #.
-#: vms-tir.c:1654
+#: vms-tir.c:1652
 msgid "TIR_S_C_OPR_DFLIT not supported"
 msgstr ""
 
-#: vms-tir.c:1709
+#: vms-tir.c:1707
 msgid "TIR_S_C_CTL_DFLOC not fully implemented"
 msgstr ""
 
-#: vms-tir.c:1717
+#: vms-tir.c:1715
 msgid "TIR_S_C_CTL_STLOC not fully implemented"
 msgstr ""
 
-#: vms-tir.c:1725
+#: vms-tir.c:1723
 msgid "TIR_S_C_CTL_STKDL not fully implemented"
 msgstr ""
 
-#: vms-tir.c:1780
+#: vms-tir.c:1778
 #, c-format
 msgid "Obj code %d not found"
 msgstr ""
 
-#: vms-tir.c:2129
+#: vms-tir.c:2127
 #, c-format
 msgid "SEC_RELOC with no relocs in section %s"
 msgstr ""
 
-#: vms-tir.c:2403
+#: vms-tir.c:2401
 #, c-format
 msgid "Unhandled relocation %s"
 msgstr ""
@@ -1453,37 +1967,37 @@ msgstr ""
 msgid "%s: no such symbol"
 msgstr ""
 
-#: xcofflink.c:3728
+#: xcofflink.c:3733
 #, c-format
 msgid "warning: attempt to export undefined symbol `%s'"
 msgstr ""
 
-#: xcofflink.c:4704
+#: xcofflink.c:4709
 #, c-format
 msgid "TOC overflow: 0x%lx > 0x10000; try -mminimal-toc when compiling"
 msgstr ""
 
-#: xcofflink.c:5529 xcofflink.c:5885 xcofflink.c:5922 xcofflink.c:6239
+#: xcofflink.c:5534 xcofflink.c:5890 xcofflink.c:5927 xcofflink.c:6244
 #, c-format
 msgid "%s: loader reloc in unrecognized section `%s'"
 msgstr ""
 
-#: xcofflink.c:5551 xcofflink.c:6250
+#: xcofflink.c:5556 xcofflink.c:6255
 #, c-format
 msgid "%s: `%s' in loader reloc but not loader sym"
 msgstr ""
 
-#: xcofflink.c:5566
+#: xcofflink.c:5571
 #, c-format
 msgid "%s: loader reloc in read-only section %s"
 msgstr ""
 
-#: xcofflink.c:6446
+#: xcofflink.c:6451
 #, c-format
 msgid "%s: unsupported relocation type 0x%02x"
 msgstr ""
 
-#: xcofflink.c:6492
+#: xcofflink.c:6497
 #, c-format
 msgid "%s: TOC reloc at 0x%x to symbol `%s' with no TOC entry"
 msgstr ""
diff --git a/binutils/Makefile.in b/binutils/Makefile.in
index 53dd0c0..3187f49 100644
--- a/binutils/Makefile.in
+++ b/binutils/Makefile.in
@@ -88,7 +88,6 @@ INCLUDE_LOCALE_H = @INCLUDE_LOCALE_H@
 INSTOBJEXT = @INSTOBJEXT@
 INTLDEPS = @INTLDEPS@
 INTLOBJS = @INTLOBJS@
-LD = @LD@
 LIBTOOL = @LIBTOOL@
 LN_S = @LN_S@
 MAINT = @MAINT@
@@ -96,7 +95,7 @@ MAKEINFO = @MAKEINFO@
 MKINSTALLDIRS = @MKINSTALLDIRS@
 MSGFMT = @MSGFMT@
 NLMCONV_DEFS = @NLMCONV_DEFS@
-NM = @NM@
+OBJDUMP = @OBJDUMP@
 PACKAGE = @PACKAGE@
 POFILES = @POFILES@
 POSUB = @POSUB@
@@ -104,7 +103,6 @@ RANLIB = @RANLIB@
 UNDERSCORE = @UNDERSCORE@
 USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
 USE_NLS = @USE_NLS@
-USE_SYMBOL_UNDERSCORE = @USE_SYMBOL_UNDERSCORE@
 VERSION = @VERSION@
 l = @l@
 
diff --git a/binutils/aclocal.m4 b/binutils/aclocal.m4
index 88a1565..2d62d71 100644
--- a/binutils/aclocal.m4
+++ b/binutils/aclocal.m4
@@ -105,7 +105,7 @@ fi
 AC_SUBST($1)])
 
 
-# serial 35 AC_PROG_LIBTOOL
+# serial 40 AC_PROG_LIBTOOL
 AC_DEFUN(AC_PROG_LIBTOOL,
 [AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
 
@@ -114,10 +114,11 @@ AC_CACHE_SAVE
 
 # Actually configure libtool.  ac_aux_dir is where install-sh is found.
 CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
-DLLTOOL="$DLLTOOL" AS="$AS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
 ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
 || AC_MSG_ERROR([libtool configure failed])
 
 # Reload cache, that may have been modified by ltconfig
@@ -146,24 +147,33 @@ AC_REQUIRE([AC_PROG_RANLIB])dnl
 AC_REQUIRE([AC_PROG_CC])dnl
 AC_REQUIRE([AC_PROG_LD])dnl
 AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_SYS_NM_PARSE])dnl
-AC_REQUIRE([AC_SYS_SYMBOL_UNDERSCORE])dnl
 AC_REQUIRE([AC_PROG_LN_S])dnl
 dnl
 
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
+
 # Check for any special flags to pass to ltconfig.
 libtool_flags="--cache-file=$cache_file"
 test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
 test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
 test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
 test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
 test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
+[libtool_flags="$libtool_flags --enable-dlopen"])
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[libtool_flags="$libtool_flags --enable-win32-dll"])
+AC_ARG_ENABLE(libtool-lock,
+  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
 
 # Some flags need to be propagated to the compiler or linker for good
 # libtool support.
-case "$host" in
+case "$lt_target" in
 *-*-irix6*)
   # Find out which ABI we are using.
   echo '[#]line __oline__ "configure"' > conftest.$ac_ext
@@ -195,33 +205,28 @@ case "$host" in
   fi
   ;;
 
-*-*-cygwin*)
-  AC_SYS_LIBTOOL_CYGWIN
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw*)
+  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+  AC_CHECK_TOOL(AS, as, false)
+  AC_CHECK_TOOL(OBJDUMP, objdump, false)
   ;;
-
+])
 esac
-
-# enable the --disable-libtool-lock switch
-
-AC_ARG_ENABLE(libtool-lock,
-[  --disable-libtool-lock  force libtool not to do file locking],
-need_locks=$enableval,
-need_locks=yes)
-
-if test x"$need_locks" = xno; then
-  libtool_flags="$libtool_flags --disable-lock"
-fi
 ])
 
-# AC_LIBTOOL_DLOPEN - check for dlopen support
-AC_DEFUN(AC_LIBTOOL_DLOPEN, [lt_dlopen=yes])
+# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
+AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
+
+# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
+AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
 
 # AC_ENABLE_SHARED - implement the --enable-shared flag
 # Usage: AC_ENABLE_SHARED[(DEFAULT)]
 #   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
 #   `yes'.
-AC_DEFUN(AC_ENABLE_SHARED,
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_SHARED, [dnl
+define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
 AC_ARG_ENABLE(shared,
 changequote(<<, >>)dnl
 <<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
@@ -246,15 +251,15 @@ enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
 ])
 
 # AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN(AC_DISABLE_SHARED,
-[AC_ENABLE_SHARED(no)])
+AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)])
 
 # AC_ENABLE_STATIC - implement the --enable-static flag
 # Usage: AC_ENABLE_STATIC[(DEFAULT)]
 #   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
 #   `yes'.
-AC_DEFUN(AC_ENABLE_STATIC,
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_STATIC, [dnl
+define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
 AC_ARG_ENABLE(static,
 changequote(<<, >>)dnl
 <<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
@@ -279,16 +284,16 @@ enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
 ])
 
 # AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN(AC_DISABLE_STATIC,
-[AC_ENABLE_STATIC(no)])
+AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)])
 
 
 # AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
 # Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
 #   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
 #   `yes'.
-AC_DEFUN(AC_ENABLE_FAST_INSTALL,
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
+define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
 AC_ARG_ENABLE(fast-install,
 changequote(<<, >>)dnl
 <<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
@@ -313,9 +318,8 @@ enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
 ])
 
 # AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN(AC_DISABLE_FAST_INSTALL,
-[AC_ENABLE_FAST_INSTALL(no)])
-
+AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)])
 
 # AC_PROG_LD - find the path to the GNU or non-GNU linker
 AC_DEFUN(AC_PROG_LD,
@@ -333,7 +337,7 @@ if test "$ac_cv_prog_gcc" = yes; then
   case "$ac_prog" in
     # Accept absolute paths.
 changequote(,)dnl
-    /* | [A-Za-z]:[\\/]*)
+    [\\/]* | [A-Za-z]:[\\/]*)
       re_direlt='/[^/][^/]*/\.\./'
 changequote([,])dnl
       # Canonicalize the path of ld
@@ -359,10 +363,10 @@ else
 fi
 AC_CACHE_VAL(ac_cv_path_LD,
 [if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
   for ac_dir in $PATH; do
     test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog"; then
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
       ac_cv_path_LD="$ac_dir/$ac_prog"
       # Check to see if the program is GNU ld.  I'd rather use --version,
       # but apparently some GNU ld's only accept -v.
@@ -385,7 +389,6 @@ else
   AC_MSG_RESULT(no)
 fi
 test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_SUBST(LD)
 AC_PROG_LD_GNU
 ])
 
@@ -407,10 +410,10 @@ AC_CACHE_VAL(ac_cv_path_NM,
   # Let the user override the test.
   ac_cv_path_NM="$NM"
 else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
   for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
     test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/nm; then
+    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
       # Check to see if the nm accepts a BSD-compat flag.
       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
       #   nm: unknown option "B" ignored
@@ -431,230 +434,24 @@ else
 fi])
 NM="$ac_cv_path_NM"
 AC_MSG_RESULT([$NM])
-AC_SUBST(NM)
 ])
 
-# AC_SYS_NM_PARSE - Check for command to grab the raw symbol name followed
-# by C symbol name from nm.
-AC_DEFUN(AC_SYS_NM_PARSE,
+# AC_CHECK_LIBM - check for math library
+AC_DEFUN(AC_CHECK_LIBM,
 [AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output])
-AC_CACHE_VAL(ac_cv_sys_global_symbol_pipe,
-[# These are sane defaults that work on at least a few old systems.
-# {They come from Ultrix.  What could be older than Ultrix?!! ;)}
-
-changequote(,)dnl
-# Character class describing NM global symbol codes.
-ac_symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-ac_symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-# Define system-specific variables.
-case "$host_os" in
-aix*)
-  ac_symcode='[BCDT]'
-  ;;
-cygwin* | mingw*)
-  ac_symcode='[ABCDGISTW]'
-  ;;
-hpux*)
-  ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
+LIBM=
+case "$lt_target" in
+*-*-beos* | *-*-cygwin*)
+  # These system don't have libm
   ;;
-irix*)
-  ac_symcode='[BCDEGRST]'
+*-ncr-sysv4.3*)
+  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
   ;;
-solaris*)
-  ac_symcode='[BDT]'
+*)
+  AC_CHECK_LIB(m, main, LIBM="-lm")
   ;;
 esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
-  ac_symcode='[ABCDGISTW]'
-fi
-changequote([,])dnl
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
-  ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ 	]\($ac_symcode\)[ 	][ 	]*\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'"
-
-  # Check to see that the pipe works correctly.
-  ac_pipe_works=no
-  rm -f conftest.$ac_ext
-  cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func;return 0;}
-EOF
-
-  if AC_TRY_EVAL(ac_compile); then
-    # Now try to grab the symbols.
-    ac_nlist=conftest.nm
-  
-    if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
-
-      # Try sorting and uniquifying the output.
-      if sort "$ac_nlist" | uniq > "$ac_nlist"T; then
-	mv -f "$ac_nlist"T "$ac_nlist"
-      else
-	rm -f "$ac_nlist"T
-      fi
-
-      # Make sure that we snagged all the symbols we need.
-      if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then
-	if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then
-	  cat <<EOF > conftest.c
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
-	  # Now generate the symbol file.
-	  eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c'
-
-	  cat <<EOF >> conftest.c
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
-  const char *name;
-  lt_ptr_t address;
-}
-changequote(,)dnl
-lt_preloaded_symbols[] =
-changequote([,])dnl
-{
-EOF
-	sed 's/^. \(.*\) \(.*\)$/  {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c
-	cat <<\EOF >> conftest.c
-  {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
-	  # Now try linking the two files.
-	  mv conftest.$ac_objext conftestm.$ac_objext
-	  ac_save_LIBS="$LIBS"
-	  ac_save_CFLAGS="$CFLAGS"
-	  LIBS="conftestm.$ac_objext"
-	  CFLAGS="$CFLAGS$no_builtin_flag"
-	  if AC_TRY_EVAL(ac_link) && test -s conftest; then
-	    ac_pipe_works=yes
-	  else
-	    echo "configure: failed program was:" >&AC_FD_CC
-	    cat conftest.c >&AC_FD_CC
-	  fi
-	  LIBS="$ac_save_LIBS"
-	  CFLAGS="$ac_save_CFLAGS"
-	else
-	  echo "cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
-	fi
-      else
-	echo "cannot find nm_test_var in $ac_nlist" >&AC_FD_CC
-      fi
-    else
-      echo "cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
-    fi
-  else
-    echo "$progname: failed program was:" >&AC_FD_CC
-    cat conftest.c >&AC_FD_CC
-  fi
-  rm -rf conftest*
-
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$ac_pipe_works" = yes; then
-    if test x"$ac_symprfx" = x"_"; then
-      ac_cv_sys_symbol_underscore=yes
-    else
-      ac_cv_sys_symbol_underscore=no
-    fi
-    break
-  else
-    ac_cv_sys_global_symbol_pipe=
-  fi
-done
-])
-
-ac_result=yes
-if test -z "$ac_cv_sys_global_symbol_pipe"; then
-   ac_result=no
-fi
-AC_MSG_RESULT($ac_result)
-])
-
-# AC_SYS_LIBTOOL_CYGWIN - find tools needed on cygwin
-AC_DEFUN(AC_SYS_LIBTOOL_CYGWIN,
-[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-AC_CHECK_TOOL(AS, as, false)
-])
-
-# AC_SYS_SYMBOL_UNDERSCORE - does the compiler prefix global symbols
-#                            with an underscore?
-AC_DEFUN(AC_SYS_SYMBOL_UNDERSCORE,
-[AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_SYS_NM_PARSE])dnl
-AC_MSG_CHECKING([for _ prefix in compiled symbols])
-AC_CACHE_VAL(ac_cv_sys_symbol_underscore,
-[ac_cv_sys_symbol_underscore=no
-cat > conftest.$ac_ext <<EOF
-void nm_test_func(){}
-int main(){nm_test_func;return 0;}
-EOF
-if AC_TRY_EVAL(ac_compile); then
-  # Now try to grab the symbols.
-  ac_nlist=conftest.nm
-  if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
-    # See whether the symbols have a leading underscore.
-    if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
-      ac_cv_sys_symbol_underscore=yes
-    else
-      if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
-	:
-      else
-	echo "configure: cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
-      fi
-    fi
-  else
-    echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
-  fi
-else
-  echo "configure: failed program was:" >&AC_FD_CC
-  cat conftest.c >&AC_FD_CC
-fi
-rm -rf conftest*
-])
-AC_MSG_RESULT($ac_cv_sys_symbol_underscore)
-USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no}
-AC_SUBST(USE_SYMBOL_UNDERSCORE)dnl
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN(AC_CHECK_LIBM, [
-AC_CHECK_LIB(mw, _mwvalidcheckl)
-AC_CHECK_LIB(m, cos)
 ])
 
 # AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
@@ -665,13 +462,14 @@ AC_CHECK_LIB(m, cos)
 # '${top_builddir}/' (note the single quotes!) if your package is not
 # flat, and, if you're not using automake, define top_builddir as
 # appropriate in the Makefiles.
-AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [
+AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
   case "$enable_ltdl_convenience" in
   no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
   "") enable_ltdl_convenience=yes
       ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
   esac
   LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
+  INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
 ])
 
 # AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
@@ -683,16 +481,23 @@ AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [
 # flat, and, if you're not using automake, define top_builddir as
 # appropriate in the Makefiles.
 # In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [
-  AC_CHECK_LIB(ltdl, main, LIBLTDL="-lltdl", [
-    case "$enable_ltdl_install" in
-    no) AC_MSG_WARN([libltdl not installed, but installation disabled]) ;;
-    "") enable_ltdl_install=yes
-        ac_configure_args="$ac_configure_args --enable-ltdl-install" ;;
-    esac
+AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+  AC_CHECK_LIB(ltdl, main,
+  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+  [if test x"$enable_ltdl_install" = xno; then
+     AC_MSG_WARN([libltdl not installed, but installation disabled])
+   else
+     enable_ltdl_install=yes
+   fi
   ])
-  if test x"$enable_ltdl_install" != x"no"; then
+  if test x"$enable_ltdl_install" = x"yes"; then
+    ac_configure_args="$ac_configure_args --enable-ltdl-install"
     LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
+    INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
+  else
+    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+    LIBLTDL="-lltdl"
+    INCLTDL=
   fi
 ])
 
@@ -704,9 +509,9 @@ AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
 AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
 AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
 AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
-AC_DEFUN(AM_SYS_NM_PARSE, [indir([AC_SYS_NM_PARSE])])dnl
-AC_DEFUN(AM_SYS_SYMBOL_UNDERSCORE, [indir([AC_SYS_SYMBOL_UNDERSCORE])])dnl
-AC_DEFUN(AM_SYS_LIBTOOL_CYGWIN, [indir([AC_SYS_LIBTOOL_CYGWIN])])dnl
+
+dnl This is just to silence aclocal about the macro not being used
+ifelse([AC_DISABLE_FAST_INSTALL])dnl
 
 # Like AC_CONFIG_HEADER, but automatically create stamp file.
 
diff --git a/binutils/configure b/binutils/configure
index 9f248d1..65f6612 100755
--- a/binutils/configure
+++ b/binutils/configure
@@ -20,7 +20,7 @@ ac_help="$ac_help
 ac_help="$ac_help
   --with-gnu-ld           assume the C compiler uses GNU ld [default=no]"
 ac_help="$ac_help
-  --disable-libtool-lock  force libtool not to do file locking"
+  --disable-libtool-lock  avoid locking (might break parallel builds)"
 ac_help="$ac_help
   --enable-targets        alternative target configurations"
 ac_help="$ac_help
@@ -1234,7 +1234,7 @@ echo "configure:1234: checking for ld used by GCC" >&5
   ac_prog=`($CC -print-prog-name=ld) 2>&5`
   case "$ac_prog" in
     # Accept absolute paths.
-    /* | [A-Za-z]:[\\/]*)
+    [\\/]* | [A-Za-z]:[\\/]*)
       re_direlt='/[^/][^/]*/\.\./'
       # Canonicalize the path of ld
       ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
@@ -1263,10 +1263,10 @@ if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
   for ac_dir in $PATH; do
     test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog"; then
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
       ac_cv_path_LD="$ac_dir/$ac_prog"
       # Check to see if the program is GNU ld.  I'd rather use --version,
       # but apparently some GNU ld's only accept -v.
@@ -1291,9 +1291,8 @@ else
   echo "$ac_t""no" 1>&6
 fi
 test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-
 echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1297: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:1296: checking if the linker ($LD) is GNU ld" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1309,7 +1308,7 @@ echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6
 
 
 echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1313: checking for BSD-compatible nm" >&5
+echo "configure:1312: checking for BSD-compatible nm" >&5
 if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1317,10 +1316,10 @@ else
   # Let the user override the test.
   ac_cv_path_NM="$NM"
 else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
   for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
     test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/nm; then
+    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
       # Check to see if the nm accepts a BSD-compat flag.
       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
       #   nm: unknown option "B" ignored
@@ -1344,213 +1343,8 @@ fi
 NM="$ac_cv_path_NM"
 echo "$ac_t""$NM" 1>&6
 
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-echo $ac_n "checking command to parse $NM output""... $ac_c" 1>&6
-echo "configure:1351: checking command to parse $NM output" >&5
-if eval "test \"`echo '$''{'ac_cv_sys_global_symbol_pipe'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  # These are sane defaults that work on at least a few old systems.
-# {They come from Ultrix.  What could be older than Ultrix?!! ;)}
-
-# Character class describing NM global symbol codes.
-ac_symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-ac_symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-# Define system-specific variables.
-case "$host_os" in
-aix*)
-  ac_symcode='[BCDT]'
-  ;;
-cygwin* | mingw*)
-  ac_symcode='[ABCDGISTW]'
-  ;;
-hpux*)
-  ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
-  ;;
-irix*)
-  ac_symcode='[BCDEGRST]'
-  ;;
-solaris*)
-  ac_symcode='[BDT]'
-  ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
-  ac_symcode='[ABCDGISTW]'
-fi
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
-  ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.* 	\($ac_symcode\) 	 	*\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'"
-
-  # Check to see that the pipe works correctly.
-  ac_pipe_works=no
-  rm -f conftest.$ac_ext
-  cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func;return 0;}
-EOF
-
-  if { (eval echo configure:1414: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    # Now try to grab the symbols.
-    ac_nlist=conftest.nm
-  
-    if { (eval echo configure:1418: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then
-
-      # Try sorting and uniquifying the output.
-      if sort "$ac_nlist" | uniq > "$ac_nlist"T; then
-	mv -f "$ac_nlist"T "$ac_nlist"
-      else
-	rm -f "$ac_nlist"T
-      fi
-
-      # Make sure that we snagged all the symbols we need.
-      if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then
-	if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then
-	  cat <<EOF > conftest.c
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
-	  # Now generate the symbol file.
-	  eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c'
-
-	  cat <<EOF >> conftest.c
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
-  const char *name;
-  lt_ptr_t address;
-}
-lt_preloaded_symbols[] =
-{
-EOF
-	sed 's/^. \(.*\) \(.*\)$/  {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c
-	cat <<\EOF >> conftest.c
-  {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
-	  # Now try linking the two files.
-	  mv conftest.$ac_objext conftestm.$ac_objext
-	  ac_save_LIBS="$LIBS"
-	  ac_save_CFLAGS="$CFLAGS"
-	  LIBS="conftestm.$ac_objext"
-	  CFLAGS="$CFLAGS$no_builtin_flag"
-	  if { (eval echo configure:1470: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-	    ac_pipe_works=yes
-	  else
-	    echo "configure: failed program was:" >&5
-	    cat conftest.c >&5
-	  fi
-	  LIBS="$ac_save_LIBS"
-	  CFLAGS="$ac_save_CFLAGS"
-	else
-	  echo "cannot find nm_test_func in $ac_nlist" >&5
-	fi
-      else
-	echo "cannot find nm_test_var in $ac_nlist" >&5
-      fi
-    else
-      echo "cannot run $ac_cv_sys_global_symbol_pipe" >&5
-    fi
-  else
-    echo "$progname: failed program was:" >&5
-    cat conftest.c >&5
-  fi
-  rm -rf conftest*
-
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$ac_pipe_works" = yes; then
-    if test x"$ac_symprfx" = x"_"; then
-      ac_cv_sys_symbol_underscore=yes
-    else
-      ac_cv_sys_symbol_underscore=no
-    fi
-    break
-  else
-    ac_cv_sys_global_symbol_pipe=
-  fi
-done
-
-fi
-
-
-ac_result=yes
-if test -z "$ac_cv_sys_global_symbol_pipe"; then
-   ac_result=no
-fi
-echo "$ac_t""$ac_result" 1>&6
-
-echo $ac_n "checking for _ prefix in compiled symbols""... $ac_c" 1>&6
-echo "configure:1516: checking for _ prefix in compiled symbols" >&5
-if eval "test \"`echo '$''{'ac_cv_sys_symbol_underscore'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  ac_cv_sys_symbol_underscore=no
-cat > conftest.$ac_ext <<EOF
-void nm_test_func(){}
-int main(){nm_test_func;return 0;}
-EOF
-if { (eval echo configure:1525: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  # Now try to grab the symbols.
-  ac_nlist=conftest.nm
-  if { (eval echo configure:1528: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then
-    # See whether the symbols have a leading underscore.
-    if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
-      ac_cv_sys_symbol_underscore=yes
-    else
-      if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
-	:
-      else
-	echo "configure: cannot find nm_test_func in $ac_nlist" >&5
-      fi
-    fi
-  else
-    echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&5
-  fi
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.c >&5
-fi
-rm -rf conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_sys_symbol_underscore" 1>&6
-USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no}
-
 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1554: checking whether ln -s works" >&5
+echo "configure:1348: checking whether ln -s works" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1570,30 +1364,37 @@ else
   echo "$ac_t""no" 1>&6
 fi
 
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
 
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
 
 # Check for any special flags to pass to ltconfig.
 libtool_flags="--cache-file=$cache_file"
 test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
 test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
 test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
 test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
 test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
 
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+  enableval="$enable_libtool_lock"
+  :
+fi
+
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+
 # Some flags need to be propagated to the compiler or linker for good
 # libtool support.
-case "$host" in
+case "$lt_target" in
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 1596 "configure"' > conftest.$ac_ext
-  if { (eval echo configure:1597: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  echo '#line 1397 "configure"' > conftest.$ac_ext
+  if { (eval echo configure:1398: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
     case "`/usr/bin/file conftest.o`" in
     *32-bit*)
       LD="${LD-ld} -32"
@@ -1614,19 +1415,19 @@ case "$host" in
   SAVE_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -belf"
   echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:1618: checking whether the C compiler needs -belf" >&5
+echo "configure:1419: checking whether the C compiler needs -belf" >&5
 if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1623 "configure"
+#line 1424 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:1630: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1431: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   lt_cv_cc_needs_belf=yes
 else
@@ -1645,161 +1446,9 @@ echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
   fi
   ;;
 
-*-*-cygwin*)
-  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1653: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_DLLTOOL"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1685: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  DLLTOOL="false"
-fi
-fi
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1720: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_AS"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1752: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  AS="false"
-fi
-fi
-
-
-  ;;
 
 esac
 
-# enable the --disable-libtool-lock switch
-
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
-  enableval="$enable_libtool_lock"
-  need_locks=$enableval
-else
-  need_locks=yes
-fi
-
-
-if test x"$need_locks" = xno; then
-  libtool_flags="$libtool_flags --disable-lock"
-fi
-
 
 # Save cache, so that ltconfig can load it
 cat > confcache <<\EOF
@@ -1852,10 +1501,11 @@ rm -f confcache
 
 # Actually configure libtool.  ac_aux_dir is where install-sh is found.
 CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
-DLLTOOL="$DLLTOOL" AS="$AS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
 ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
 || { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
 
 # Reload cache, that may have been modified by ltconfig
@@ -1913,7 +1563,7 @@ fi
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1917: checking for $ac_word" >&5
+echo "configure:1567: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1943,7 +1593,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1947: checking for $ac_word" >&5
+echo "configure:1597: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1994,7 +1644,7 @@ fi
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1998: checking for $ac_word" >&5
+echo "configure:1648: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2026,7 +1676,7 @@ fi
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:2030: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1680: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -2037,12 +1687,12 @@ cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 2041 "configure"
+#line 1691 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:2046: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1696: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -2068,12 +1718,12 @@ if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2072: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1722: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2077: checking whether we are using GNU C" >&5
+echo "configure:1727: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2082,7 +1732,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2086: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1736: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -2101,7 +1751,7 @@ ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2105: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1755: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2138,7 +1788,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2142: checking for $ac_word" >&5
+echo "configure:1792: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2169,7 +1819,7 @@ done
 test -n "$YACC" || YACC="yacc"
 
 echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:2173: checking how to run the C preprocessor" >&5
+echo "configure:1823: checking how to run the C preprocessor" >&5
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
@@ -2184,13 +1834,13 @@ else
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp.
   cat > conftest.$ac_ext <<EOF
-#line 2188 "configure"
+#line 1838 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2194: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1844: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -2201,13 +1851,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -E -traditional-cpp"
   cat > conftest.$ac_ext <<EOF
-#line 2205 "configure"
+#line 1855 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2211: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1861: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -2218,13 +1868,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -nologo -E"
   cat > conftest.$ac_ext <<EOF
-#line 2222 "configure"
+#line 1872 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2228: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1878: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -2254,7 +1904,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2258: checking for $ac_word" >&5
+echo "configure:1908: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2287,7 +1937,7 @@ test -n "$LEX" || LEX=""$missing_dir/missing flex""
 # Extract the first word of "flex", so it can be a program name with args.
 set dummy flex; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2291: checking for $ac_word" >&5
+echo "configure:1941: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2321,7 +1971,7 @@ then
   *) ac_lib=l ;;
   esac
   echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
-echo "configure:2325: checking for yywrap in -l$ac_lib" >&5
+echo "configure:1975: checking for yywrap in -l$ac_lib" >&5
 ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2329,7 +1979,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-l$ac_lib  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 2333 "configure"
+#line 1983 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -2340,7 +1990,7 @@ int main() {
 yywrap()
 ; return 0; }
 EOF
-if { (eval echo configure:2344: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1994: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -2363,7 +2013,7 @@ fi
 fi
 
 echo $ac_n "checking lex output file root""... $ac_c" 1>&6
-echo "configure:2367: checking lex output file root" >&5
+echo "configure:2017: checking lex output file root" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2384,7 +2034,7 @@ echo "$ac_t""$ac_cv_prog_lex_root" 1>&6
 LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
 
 echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6
-echo "configure:2388: checking whether yytext is a pointer" >&5
+echo "configure:2038: checking whether yytext is a pointer" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2396,14 +2046,14 @@ echo 'extern char *yytext;' >>$LEX_OUTPUT_ROOT.c
 ac_save_LIBS="$LIBS"
 LIBS="$LIBS $LEXLIB"
 cat > conftest.$ac_ext <<EOF
-#line 2400 "configure"
+#line 2050 "configure"
 #include "confdefs.h"
 `cat $LEX_OUTPUT_ROOT.c`
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:2407: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2057: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_prog_lex_yytext_pointer=yes
 else
@@ -2427,7 +2077,7 @@ fi
 
 ALL_LINGUAS=
 echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
-echo "configure:2431: checking for POSIXized ISC" >&5
+echo "configure:2081: checking for POSIXized ISC" >&5
 if test -d /etc/conf/kconfig.d &&
   grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
 then
@@ -2448,12 +2098,12 @@ else
 fi
 
 echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:2452: checking for ANSI C header files" >&5
+echo "configure:2102: checking for ANSI C header files" >&5
 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2457 "configure"
+#line 2107 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 #include <stdarg.h>
@@ -2461,7 +2111,7 @@ else
 #include <float.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2465: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2115: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2478,7 +2128,7 @@ rm -f conftest*
 if test $ac_cv_header_stdc = yes; then
   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 2482 "configure"
+#line 2132 "configure"
 #include "confdefs.h"
 #include <string.h>
 EOF
@@ -2496,7 +2146,7 @@ fi
 if test $ac_cv_header_stdc = yes; then
   # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 2500 "configure"
+#line 2150 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 EOF
@@ -2517,7 +2167,7 @@ if test "$cross_compiling" = yes; then
   :
 else
   cat > conftest.$ac_ext <<EOF
-#line 2521 "configure"
+#line 2171 "configure"
 #include "confdefs.h"
 #include <ctype.h>
 #define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
@@ -2528,7 +2178,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
 exit (0); }
 
 EOF
-if { (eval echo configure:2532: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2182: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   :
 else
@@ -2552,12 +2202,12 @@ EOF
 fi
 
 echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:2556: checking for working const" >&5
+echo "configure:2206: checking for working const" >&5
 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2561 "configure"
+#line 2211 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -2606,7 +2256,7 @@ ccp = (char const *const *) p;
 
 ; return 0; }
 EOF
-if { (eval echo configure:2610: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2260: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_const=yes
 else
@@ -2627,21 +2277,21 @@ EOF
 fi
 
 echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:2631: checking for inline" >&5
+echo "configure:2281: checking for inline" >&5
 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_cv_c_inline=no
 for ac_kw in inline __inline__ __inline; do
   cat > conftest.$ac_ext <<EOF
-#line 2638 "configure"
+#line 2288 "configure"
 #include "confdefs.h"
 
 int main() {
 } $ac_kw foo() {
 ; return 0; }
 EOF
-if { (eval echo configure:2645: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2295: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_inline=$ac_kw; break
 else
@@ -2667,12 +2317,12 @@ EOF
 esac
 
 echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:2671: checking for off_t" >&5
+echo "configure:2321: checking for off_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2676 "configure"
+#line 2326 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -2700,12 +2350,12 @@ EOF
 fi
 
 echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:2704: checking for size_t" >&5
+echo "configure:2354: checking for size_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2709 "configure"
+#line 2359 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -2735,19 +2385,19 @@ fi
 # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
 # for constant arguments.  Useless!
 echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:2739: checking for working alloca.h" >&5
+echo "configure:2389: checking for working alloca.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2744 "configure"
+#line 2394 "configure"
 #include "confdefs.h"
 #include <alloca.h>
 int main() {
 char *p = alloca(2 * sizeof(int));
 ; return 0; }
 EOF
-if { (eval echo configure:2751: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2401: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_header_alloca_h=yes
 else
@@ -2768,12 +2418,12 @@ EOF
 fi
 
 echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:2772: checking for alloca" >&5
+echo "configure:2422: checking for alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2777 "configure"
+#line 2427 "configure"
 #include "confdefs.h"
 
 #ifdef __GNUC__
@@ -2801,7 +2451,7 @@ int main() {
 char *p = (char *) alloca(1);
 ; return 0; }
 EOF
-if { (eval echo configure:2805: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2455: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_func_alloca_works=yes
 else
@@ -2833,12 +2483,12 @@ EOF
 
 
 echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:2837: checking whether alloca needs Cray hooks" >&5
+echo "configure:2487: checking whether alloca needs Cray hooks" >&5
 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2842 "configure"
+#line 2492 "configure"
 #include "confdefs.h"
 #if defined(CRAY) && ! defined(CRAY2)
 webecray
@@ -2863,12 +2513,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6
 if test $ac_cv_os_cray = yes; then
 for ac_func in _getb67 GETB67 getb67; do
   echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2867: checking for $ac_func" >&5
+echo "configure:2517: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2872 "configure"
+#line 2522 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -2891,7 +2541,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2895: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2545: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -2918,7 +2568,7 @@ done
 fi
 
 echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:2922: checking stack direction for C alloca" >&5
+echo "configure:2572: checking stack direction for C alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2926,7 +2576,7 @@ else
   ac_cv_c_stack_direction=0
 else
   cat > conftest.$ac_ext <<EOF
-#line 2930 "configure"
+#line 2580 "configure"
 #include "confdefs.h"
 find_stack_direction ()
 {
@@ -2945,7 +2595,7 @@ main ()
   exit (find_stack_direction() < 0);
 }
 EOF
-if { (eval echo configure:2949: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2599: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_c_stack_direction=1
 else
@@ -2970,17 +2620,17 @@ for ac_hdr in unistd.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2974: checking for $ac_hdr" >&5
+echo "configure:2624: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2979 "configure"
+#line 2629 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2984: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2634: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -3009,12 +2659,12 @@ done
 for ac_func in getpagesize
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3013: checking for $ac_func" >&5
+echo "configure:2663: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3018 "configure"
+#line 2668 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -3037,7 +2687,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:3041: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2691: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -3062,7 +2712,7 @@ fi
 done
 
 echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:3066: checking for working mmap" >&5
+echo "configure:2716: checking for working mmap" >&5
 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3070,7 +2720,7 @@ else
   ac_cv_func_mmap_fixed_mapped=no
 else
   cat > conftest.$ac_ext <<EOF
-#line 3074 "configure"
+#line 2724 "configure"
 #include "confdefs.h"
 
 /* Thanks to Mike Haertel and Jim Avera for this test.
@@ -3210,7 +2860,7 @@ main()
 }
 
 EOF
-if { (eval echo configure:3214: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2864: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_func_mmap_fixed_mapped=yes
 else
@@ -3238,17 +2888,17 @@ unistd.h values.h sys/param.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3242: checking for $ac_hdr" >&5
+echo "configure:2892: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3247 "configure"
+#line 2897 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3252: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2902: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -3278,12 +2928,12 @@ done
 __argz_count __argz_stringify __argz_next
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3282: checking for $ac_func" >&5
+echo "configure:2932: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3287 "configure"
+#line 2937 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -3306,7 +2956,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:3310: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2960: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -3335,12 +2985,12 @@ done
      for ac_func in stpcpy
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3339: checking for $ac_func" >&5
+echo "configure:2989: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3344 "configure"
+#line 2994 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -3363,7 +3013,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:3367: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3017: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -3397,19 +3047,19 @@ EOF
 
    if test $ac_cv_header_locale_h = yes; then
     echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:3401: checking for LC_MESSAGES" >&5
+echo "configure:3051: checking for LC_MESSAGES" >&5
 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3406 "configure"
+#line 3056 "configure"
 #include "confdefs.h"
 #include <locale.h>
 int main() {
 return LC_MESSAGES
 ; return 0; }
 EOF
-if { (eval echo configure:3413: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3063: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   am_cv_val_LC_MESSAGES=yes
 else
@@ -3430,7 +3080,7 @@ EOF
     fi
   fi
    echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:3434: checking whether NLS is requested" >&5
+echo "configure:3084: checking whether NLS is requested" >&5
         # Check whether --enable-nls or --disable-nls was given.
 if test "${enable_nls+set}" = set; then
   enableval="$enable_nls"
@@ -3450,7 +3100,7 @@ fi
 EOF
 
       echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:3454: checking whether included gettext is requested" >&5
+echo "configure:3104: checking whether included gettext is requested" >&5
       # Check whether --with-included-gettext or --without-included-gettext was given.
 if test "${with_included_gettext+set}" = set; then
   withval="$with_included_gettext"
@@ -3469,17 +3119,17 @@ fi
 
 	ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:3473: checking for libintl.h" >&5
+echo "configure:3123: checking for libintl.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3478 "configure"
+#line 3128 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3483: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3133: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -3496,19 +3146,19 @@ fi
 if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:3500: checking for gettext in libc" >&5
+echo "configure:3150: checking for gettext in libc" >&5
 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3505 "configure"
+#line 3155 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 int main() {
 return (int) gettext ("")
 ; return 0; }
 EOF
-if { (eval echo configure:3512: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3162: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gt_cv_func_gettext_libc=yes
 else
@@ -3524,7 +3174,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6
 
 	   if test "$gt_cv_func_gettext_libc" != "yes"; then
 	     echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:3528: checking for bindtextdomain in -lintl" >&5
+echo "configure:3178: checking for bindtextdomain in -lintl" >&5
 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -3532,7 +3182,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lintl  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3536 "configure"
+#line 3186 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3543,7 +3193,7 @@ int main() {
 bindtextdomain()
 ; return 0; }
 EOF
-if { (eval echo configure:3547: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3197: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -3559,19 +3209,19 @@ fi
 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:3563: checking for gettext in libintl" >&5
+echo "configure:3213: checking for gettext in libintl" >&5
 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3568 "configure"
+#line 3218 "configure"
 #include "confdefs.h"
 
 int main() {
 return (int) gettext ("")
 ; return 0; }
 EOF
-if { (eval echo configure:3575: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3225: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gt_cv_func_gettext_libintl=yes
 else
@@ -3599,7 +3249,7 @@ EOF
 	      # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3603: checking for $ac_word" >&5
+echo "configure:3253: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3633,12 +3283,12 @@ fi
 		for ac_func in dcgettext
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3637: checking for $ac_func" >&5
+echo "configure:3287: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3642 "configure"
+#line 3292 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -3661,7 +3311,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:3665: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3315: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -3688,7 +3338,7 @@ done
 		# Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3692: checking for $ac_word" >&5
+echo "configure:3342: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3724,7 +3374,7 @@ fi
 		# Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3728: checking for $ac_word" >&5
+echo "configure:3378: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3756,7 +3406,7 @@ else
 fi
 
 		cat > conftest.$ac_ext <<EOF
-#line 3760 "configure"
+#line 3410 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -3764,7 +3414,7 @@ extern int _nl_msg_cat_cntr;
 			       return _nl_msg_cat_cntr
 ; return 0; }
 EOF
-if { (eval echo configure:3768: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3418: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   CATOBJEXT=.gmo
 		   DATADIRNAME=share
@@ -3796,7 +3446,7 @@ fi
         # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3800: checking for $ac_word" >&5
+echo "configure:3450: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3830,7 +3480,7 @@ fi
         # Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3834: checking for $ac_word" >&5
+echo "configure:3484: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3866,7 +3516,7 @@ fi
         # Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3870: checking for $ac_word" >&5
+echo "configure:3520: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3956,7 +3606,7 @@ fi
        LINGUAS=
      else
        echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:3960: checking for catalogs to be installed" >&5
+echo "configure:3610: checking for catalogs to be installed" >&5
        NEW_LINGUAS=
        for lang in ${LINGUAS=$ALL_LINGUAS}; do
          case "$ALL_LINGUAS" in
@@ -3984,17 +3634,17 @@ echo "configure:3960: checking for catalogs to be installed" >&5
       if test "$CATOBJEXT" = ".cat"; then
 	 ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:3988: checking for linux/version.h" >&5
+echo "configure:3638: checking for linux/version.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3993 "configure"
+#line 3643 "configure"
 #include "confdefs.h"
 #include <linux/version.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3998: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3648: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -4057,7 +3707,7 @@ fi
   
 
 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:4061: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:3711: checking whether to enable maintainer-specific portions of Makefiles" >&5
     # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"
@@ -4080,12 +3730,12 @@ fi
   
 
 echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:4084: checking for Cygwin environment" >&5
+echo "configure:3734: checking for Cygwin environment" >&5
 if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4089 "configure"
+#line 3739 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -4096,7 +3746,7 @@ int main() {
 return __CYGWIN__;
 ; return 0; }
 EOF
-if { (eval echo configure:4100: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3750: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_cygwin=yes
 else
@@ -4113,19 +3763,19 @@ echo "$ac_t""$ac_cv_cygwin" 1>&6
 CYGWIN=
 test "$ac_cv_cygwin" = yes && CYGWIN=yes
 echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:4117: checking for mingw32 environment" >&5
+echo "configure:3767: checking for mingw32 environment" >&5
 if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4122 "configure"
+#line 3772 "configure"
 #include "confdefs.h"
 
 int main() {
 return __MINGW32__;
 ; return 0; }
 EOF
-if { (eval echo configure:4129: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3779: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_mingw32=yes
 else
@@ -4144,7 +3794,7 @@ test "$ac_cv_mingw32" = yes && MINGW32=yes
 
 
 echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:4148: checking for executable suffix" >&5
+echo "configure:3798: checking for executable suffix" >&5
 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4154,7 +3804,7 @@ else
   rm -f conftest*
   echo 'int main () { return 0; }' > conftest.$ac_ext
   ac_cv_exeext=
-  if { (eval echo configure:4158: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+  if { (eval echo configure:3808: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
     for file in conftest.*; do
       case $file in
       *.c | *.o | *.obj | *.ilk | *.pdb) ;;
@@ -4197,7 +3847,7 @@ AR=${AR-ar}
 # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4201: checking for $ac_word" >&5
+echo "configure:3851: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4236,7 +3886,7 @@ fi
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:4240: checking for a BSD compatible install" >&5
+echo "configure:3890: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -4303,7 +3953,7 @@ if test "x$cross_compiling" = "xno"; then
   EXEEXT_FOR_BUILD='$(EXEEXT)'
 else
   echo $ac_n "checking for build system executable suffix""... $ac_c" 1>&6
-echo "configure:4307: checking for build system executable suffix" >&5
+echo "configure:3957: checking for build system executable suffix" >&5
 if eval "test \"`echo '$''{'bfd_cv_build_exeext'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4338,17 +3988,17 @@ for ac_hdr in string.h strings.h stdlib.h unistd.h fcntl.h sys/file.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4342: checking for $ac_hdr" >&5
+echo "configure:3992: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4347 "configure"
+#line 3997 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4352: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4002: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -4375,12 +4025,12 @@ fi
 done
 
 echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
-echo "configure:4379: checking for sys/wait.h that is POSIX.1 compatible" >&5
+echo "configure:4029: checking for sys/wait.h that is POSIX.1 compatible" >&5
 if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4384 "configure"
+#line 4034 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <sys/wait.h>
@@ -4396,7 +4046,7 @@ wait (&s);
 s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
 ; return 0; }
 EOF
-if { (eval echo configure:4400: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4050: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_header_sys_wait_h=yes
 else
@@ -4419,19 +4069,19 @@ fi
 # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
 # for constant arguments.  Useless!
 echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:4423: checking for working alloca.h" >&5
+echo "configure:4073: checking for working alloca.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4428 "configure"
+#line 4078 "configure"
 #include "confdefs.h"
 #include <alloca.h>
 int main() {
 char *p = alloca(2 * sizeof(int));
 ; return 0; }
 EOF
-if { (eval echo configure:4435: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4085: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_header_alloca_h=yes
 else
@@ -4452,12 +4102,12 @@ EOF
 fi
 
 echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:4456: checking for alloca" >&5
+echo "configure:4106: checking for alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4461 "configure"
+#line 4111 "configure"
 #include "confdefs.h"
 
 #ifdef __GNUC__
@@ -4485,7 +4135,7 @@ int main() {
 char *p = (char *) alloca(1);
 ; return 0; }
 EOF
-if { (eval echo configure:4489: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4139: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_func_alloca_works=yes
 else
@@ -4517,12 +4167,12 @@ EOF
 
 
 echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:4521: checking whether alloca needs Cray hooks" >&5
+echo "configure:4171: checking whether alloca needs Cray hooks" >&5
 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4526 "configure"
+#line 4176 "configure"
 #include "confdefs.h"
 #if defined(CRAY) && ! defined(CRAY2)
 webecray
@@ -4547,12 +4197,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6
 if test $ac_cv_os_cray = yes; then
 for ac_func in _getb67 GETB67 getb67; do
   echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4551: checking for $ac_func" >&5
+echo "configure:4201: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4556 "configure"
+#line 4206 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -4575,7 +4225,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:4579: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4229: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -4602,7 +4252,7 @@ done
 fi
 
 echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:4606: checking stack direction for C alloca" >&5
+echo "configure:4256: checking stack direction for C alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4610,7 +4260,7 @@ else
   ac_cv_c_stack_direction=0
 else
   cat > conftest.$ac_ext <<EOF
-#line 4614 "configure"
+#line 4264 "configure"
 #include "confdefs.h"
 find_stack_direction ()
 {
@@ -4629,7 +4279,7 @@ main ()
   exit (find_stack_direction() < 0);
 }
 EOF
-if { (eval echo configure:4633: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4283: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_c_stack_direction=1
 else
@@ -4653,12 +4303,12 @@ fi
 for ac_func in sbrk utimes
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4657: checking for $ac_func" >&5
+echo "configure:4307: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4662 "configure"
+#line 4312 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -4681,7 +4331,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:4685: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4335: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -4709,14 +4359,14 @@ done
 # Some systems have frexp only in -lm, not in -lc.
 
 echo $ac_n "checking for library containing frexp""... $ac_c" 1>&6
-echo "configure:4713: checking for library containing frexp" >&5
+echo "configure:4363: checking for library containing frexp" >&5
 if eval "test \"`echo '$''{'ac_cv_search_frexp'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_func_search_save_LIBS="$LIBS"
 ac_cv_search_frexp="no"
 cat > conftest.$ac_ext <<EOF
-#line 4720 "configure"
+#line 4370 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -4727,7 +4377,7 @@ int main() {
 frexp()
 ; return 0; }
 EOF
-if { (eval echo configure:4731: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4381: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_search_frexp="none required"
 else
@@ -4738,7 +4388,7 @@ rm -f conftest*
 test "$ac_cv_search_frexp" = "no" && for i in m; do
 LIBS="-l$i  $ac_func_search_save_LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 4742 "configure"
+#line 4392 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -4749,7 +4399,7 @@ int main() {
 frexp()
 ; return 0; }
 EOF
-if { (eval echo configure:4753: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4403: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_search_frexp="-l$i"
 break
@@ -4771,19 +4421,19 @@ else :
 fi
 
 echo $ac_n "checking for time_t in time.h""... $ac_c" 1>&6
-echo "configure:4775: checking for time_t in time.h" >&5
+echo "configure:4425: checking for time_t in time.h" >&5
 if eval "test \"`echo '$''{'bu_cv_decl_time_t_time_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4780 "configure"
+#line 4430 "configure"
 #include "confdefs.h"
 #include <time.h>
 int main() {
 time_t i;
 ; return 0; }
 EOF
-if { (eval echo configure:4787: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4437: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   bu_cv_decl_time_t_time_h=yes
 else
@@ -4804,19 +4454,19 @@ EOF
 fi
 
 echo $ac_n "checking for time_t in sys/types.h""... $ac_c" 1>&6
-echo "configure:4808: checking for time_t in sys/types.h" >&5
+echo "configure:4458: checking for time_t in sys/types.h" >&5
 if eval "test \"`echo '$''{'bu_cv_decl_time_t_types_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4813 "configure"
+#line 4463 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 int main() {
 time_t i;
 ; return 0; }
 EOF
-if { (eval echo configure:4820: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4470: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   bu_cv_decl_time_t_types_h=yes
 else
@@ -4839,12 +4489,12 @@ fi
 # Under Next 3.2 <utime.h> apparently does not define struct utimbuf
 # by default.
 echo $ac_n "checking for utime.h""... $ac_c" 1>&6
-echo "configure:4843: checking for utime.h" >&5
+echo "configure:4493: checking for utime.h" >&5
 if eval "test \"`echo '$''{'bu_cv_header_utime_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4848 "configure"
+#line 4498 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #ifdef HAVE_TIME_H
@@ -4855,7 +4505,7 @@ int main() {
 struct utimbuf s;
 ; return 0; }
 EOF
-if { (eval echo configure:4859: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4509: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   bu_cv_header_utime_h=yes
 else
@@ -4876,12 +4526,12 @@ EOF
 fi
 
 echo $ac_n "checking whether fprintf must be declared""... $ac_c" 1>&6
-echo "configure:4880: checking whether fprintf must be declared" >&5
+echo "configure:4530: checking whether fprintf must be declared" >&5
 if eval "test \"`echo '$''{'bfd_cv_decl_needed_fprintf'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4885 "configure"
+#line 4535 "configure"
 #include "confdefs.h"
 
 #include <stdio.h>
@@ -4902,7 +4552,7 @@ int main() {
 char *(*pfn) = (char *(*)) fprintf
 ; return 0; }
 EOF
-if { (eval echo configure:4906: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4556: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   bfd_cv_decl_needed_fprintf=no
 else
@@ -4923,12 +4573,12 @@ EOF
 fi
 
 echo $ac_n "checking whether strstr must be declared""... $ac_c" 1>&6
-echo "configure:4927: checking whether strstr must be declared" >&5
+echo "configure:4577: checking whether strstr must be declared" >&5
 if eval "test \"`echo '$''{'bfd_cv_decl_needed_strstr'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4932 "configure"
+#line 4582 "configure"
 #include "confdefs.h"
 
 #include <stdio.h>
@@ -4949,7 +4599,7 @@ int main() {
 char *(*pfn) = (char *(*)) strstr
 ; return 0; }
 EOF
-if { (eval echo configure:4953: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4603: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   bfd_cv_decl_needed_strstr=no
 else
@@ -4970,12 +4620,12 @@ EOF
 fi
 
 echo $ac_n "checking whether sbrk must be declared""... $ac_c" 1>&6
-echo "configure:4974: checking whether sbrk must be declared" >&5
+echo "configure:4624: checking whether sbrk must be declared" >&5
 if eval "test \"`echo '$''{'bfd_cv_decl_needed_sbrk'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4979 "configure"
+#line 4629 "configure"
 #include "confdefs.h"
 
 #include <stdio.h>
@@ -4996,7 +4646,7 @@ int main() {
 char *(*pfn) = (char *(*)) sbrk
 ; return 0; }
 EOF
-if { (eval echo configure:5000: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4650: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   bfd_cv_decl_needed_sbrk=no
 else
@@ -5017,12 +4667,12 @@ EOF
 fi
 
 echo $ac_n "checking whether getenv must be declared""... $ac_c" 1>&6
-echo "configure:5021: checking whether getenv must be declared" >&5
+echo "configure:4671: checking whether getenv must be declared" >&5
 if eval "test \"`echo '$''{'bfd_cv_decl_needed_getenv'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5026 "configure"
+#line 4676 "configure"
 #include "confdefs.h"
 
 #include <stdio.h>
@@ -5043,7 +4693,7 @@ int main() {
 char *(*pfn) = (char *(*)) getenv
 ; return 0; }
 EOF
-if { (eval echo configure:5047: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4697: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   bfd_cv_decl_needed_getenv=no
 else
@@ -5064,12 +4714,12 @@ EOF
 fi
 
 echo $ac_n "checking whether environ must be declared""... $ac_c" 1>&6
-echo "configure:5068: checking whether environ must be declared" >&5
+echo "configure:4718: checking whether environ must be declared" >&5
 if eval "test \"`echo '$''{'bfd_cv_decl_needed_environ'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5073 "configure"
+#line 4723 "configure"
 #include "confdefs.h"
 
 #include <stdio.h>
@@ -5090,7 +4740,7 @@ int main() {
 char *(*pfn) = (char *(*)) environ
 ; return 0; }
 EOF
-if { (eval echo configure:5094: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4744: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   bfd_cv_decl_needed_environ=no
 else
@@ -5408,12 +5058,7 @@ s%@MAKEINFO@%$MAKEINFO%g
 s%@SET_MAKE@%$SET_MAKE%g
 s%@RANLIB@%$RANLIB%g
 s%@CC@%$CC%g
-s%@LD@%$LD%g
-s%@NM@%$NM%g
-s%@USE_SYMBOL_UNDERSCORE@%$USE_SYMBOL_UNDERSCORE%g
 s%@LN_S@%$LN_S%g
-s%@DLLTOOL@%$DLLTOOL%g
-s%@AS@%$AS%g
 s%@LIBTOOL@%$LIBTOOL%g
 s%@YACC@%$YACC%g
 s%@LEX@%$LEX%g
diff --git a/binutils/po/binutils.pot b/binutils/po/binutils.pot
index 97795cb..42b808e 100644
--- a/binutils/po/binutils.pot
+++ b/binutils/po/binutils.pot
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 1999-06-03 02:58-0700\n"
+"POT-Creation-Date: 2000-02-25 22:16-0500\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -22,8 +22,8 @@ msgid ""
 "       [--basenames] [--functions] [addr addr ...]\n"
 msgstr ""
 
-#: addr2line.c:83 ar.c:255 nlmconv.c:1141 nm.c:304 objcopy.c:318 objcopy.c:337
-#: objdump.c:236 readelf.c:1168 size.c:89 strings.c:512 windres.c:730
+#: addr2line.c:83 ar.c:286 nlmconv.c:1141 nm.c:304 objcopy.c:344 objcopy.c:376
+#: objdump.c:277 readelf.c:1697 size.c:89 strings.c:512 windres.c:737
 msgid "Report bugs to bug-gnu-utils@gnu.org\n"
 msgstr ""
 
@@ -32,231 +32,240 @@ msgstr ""
 msgid "%s: can not get addresses from archive"
 msgstr ""
 
-#: ar.c:207
+#: ar.c:235
 #, c-format
 msgid "no entry %s in archive\n"
 msgstr ""
 
-#: ar.c:224
+#: ar.c:252
 #, c-format
 msgid ""
-"Usage: %s [-]{dmpqrstx}[abcilosSuvV] [member-name] archive-file file...\n"
+"Usage: %s [-]{dmpqrstx}[abcfilNoPsSuvV] [member-name] [count] archive-file "
+"file...\n"
 msgstr ""
 
-#: ar.c:226
+#: ar.c:255
 #, c-format
 msgid "       %s -M [<mri-script]\n"
 msgstr ""
 
-#: ar.c:227
+#: ar.c:256
 msgid " commands:\n"
 msgstr ""
 
-#: ar.c:228
+#: ar.c:257
 msgid "  d            - delete file(s) from the archive\n"
 msgstr ""
 
-#: ar.c:229
+#: ar.c:258
 msgid "  m[ab]        - move file(s) in the archive\n"
 msgstr ""
 
-#: ar.c:230
+#: ar.c:259
 msgid "  p            - print file(s) found in the archive\n"
 msgstr ""
 
-#: ar.c:231
+#: ar.c:260
 msgid "  q[f]         - quick append file(s) to the archive\n"
 msgstr ""
 
-#: ar.c:232
+#: ar.c:261
 msgid ""
 "  r[ab][f][u]  - replace existing or insert new file(s) into the archive\n"
 msgstr ""
 
-#: ar.c:233
+#: ar.c:262
 msgid "  t            - display contents of archive\n"
 msgstr ""
 
-#: ar.c:234
+#: ar.c:263
 msgid "  x[o]         - extract file(s) from the archive\n"
 msgstr ""
 
-#: ar.c:235
+#: ar.c:264
 msgid " command specific modifiers:\n"
 msgstr ""
 
-#: ar.c:236
+#: ar.c:265
 msgid "  [a]          - put file(s) after [member-name]\n"
 msgstr ""
 
-#: ar.c:237
+#: ar.c:266
 msgid "  [b]          - put file(s) before [member-name] (same as [i])\n"
 msgstr ""
 
-#: ar.c:238
+#: ar.c:267
+msgid "  [N]          - use instance [count] of name\n"
+msgstr ""
+
+#: ar.c:268
 msgid "  [f]          - truncate inserted file names\n"
 msgstr ""
 
-#: ar.c:239
+#: ar.c:269
+msgid "  [P]          - use full path names when matching\n"
+msgstr ""
+
+#: ar.c:270
 msgid "  [o]          - preserve original dates\n"
 msgstr ""
 
-#: ar.c:240
+#: ar.c:271
 msgid ""
 "  [u]          - only replace files that are newer than current archive "
 "contents\n"
 msgstr ""
 
-#: ar.c:241
+#: ar.c:272
 msgid " generic modifiers:\n"
 msgstr ""
 
-#: ar.c:242
+#: ar.c:273
 msgid "  [c]          - do not warn if the library had to be created\n"
 msgstr ""
 
-#: ar.c:243
+#: ar.c:274
 msgid "  [s]          - create an archive index (cf. ranlib)\n"
 msgstr ""
 
-#: ar.c:244
+#: ar.c:275
 msgid "  [S]          - do not build a symbol table\n"
 msgstr ""
 
-#: ar.c:245
+#: ar.c:276
 msgid "  [v]          - be verbose\n"
 msgstr ""
 
-#: ar.c:246
+#: ar.c:277
 msgid "  [V]          - display the version number\n"
 msgstr ""
 
-#: ar.c:250
+#: ar.c:281
 #, c-format
 msgid "Usage: %s [-vV] archive\n"
 msgstr ""
 
-#: ar.c:431
+#: ar.c:466
 msgid "two different operation options specified"
 msgstr ""
 
-#: ar.c:500
+#: ar.c:541
 #, c-format
 msgid "%s: illegal option -- %c\n"
 msgstr ""
 
-#: ar.c:532
+#: ar.c:573
 msgid "no operation specified"
 msgstr ""
 
-#: ar.c:535
+#: ar.c:576
 msgid "`u' is only meaningful with the `r' option."
 msgstr ""
 
-#: ar.c:615
-#, c-format
-msgid "%s: internal error -- this option not implemented\n"
+#: ar.c:586
+msgid "`N' is only meaningful with the `x' and 'd' options."
+msgstr ""
+
+#: ar.c:589
+msgid "Value for `N' must be positive."
 msgstr ""
 
-#: ar.c:730 ar.c:782 ar.c:1212 objcopy.c:972
+#: ar.c:672
 #, c-format
-msgid "internal stat error on %s"
+msgid "%s: internal error -- this option not implemented\n"
 msgstr ""
 
-#: ar.c:734
+#: ar.c:790 ar.c:841 ar.c:1283 objcopy.c:1021
 #, c-format
-msgid ""
-"\n"
-"<member %s>\n"
-"\n"
+msgid "internal stat error on %s"
 msgstr ""
 
-#: ar.c:751 ar.c:819
+#: ar.c:810 ar.c:878
 #, c-format
 msgid "%s is not a valid archive"
 msgstr ""
 
-#: ar.c:787
+#: ar.c:846
 #, c-format
 msgid "stat returns negative size for %s"
 msgstr ""
 
-#: ar.c:908
+#: ar.c:967
 #, c-format
 msgid "%s is not an archive"
 msgstr ""
 
-#: ar.c:915
+#: ar.c:974
 #, c-format
 msgid "%s: creating %s\n"
 msgstr ""
 
-#: ar.c:1110
+#: ar.c:1181
 #, c-format
 msgid "No member named `%s'\n"
 msgstr ""
 
-#: ar.c:1162
+#: ar.c:1233
 #, c-format
 msgid "%s: no entry %s in archive %s!\n"
 msgstr ""
 
-#: ar.c:1322
+#: ar.c:1395
 #, c-format
 msgid "%s: no archive map to update"
 msgstr ""
 
-#: arsup.c:86
+#: arsup.c:87
 #, c-format
 msgid "No entry %s in archive.\n"
 msgstr ""
 
-#: arsup.c:118
+#: arsup.c:119
 #, c-format
 msgid "Can't open file %s\n"
 msgstr ""
 
-#: arsup.c:166
+#: arsup.c:167
 #, c-format
 msgid "%s: Can't open output archive %s\n"
 msgstr ""
 
-#: arsup.c:178
+#: arsup.c:179
 #, c-format
 msgid "%s: Can't open input archive %s\n"
 msgstr ""
 
-#: arsup.c:184
+#: arsup.c:185
 #, c-format
 msgid "%s: file %s is not an archive\n"
 msgstr ""
 
-#: arsup.c:225
+#: arsup.c:226
 #, c-format
 msgid "%s: no output archive specified yet\n"
 msgstr ""
 
-#: arsup.c:245 arsup.c:280 arsup.c:316 arsup.c:336 arsup.c:394
+#: arsup.c:246 arsup.c:281 arsup.c:317 arsup.c:337 arsup.c:395
 #, c-format
 msgid "%s: no open output archive\n"
 msgstr ""
 
-#: arsup.c:253 arsup.c:354 arsup.c:374
+#: arsup.c:254 arsup.c:355 arsup.c:375
 #, c-format
 msgid "%s: can't open file %s\n"
 msgstr ""
 
-#: arsup.c:301 arsup.c:370 arsup.c:449
+#: arsup.c:302 arsup.c:371 arsup.c:450
 #, c-format
 msgid "%s: can't find module file %s\n"
 msgstr ""
 
-#: arsup.c:401
+#: arsup.c:402
 #, c-format
 msgid "Current open archive is %s\n"
 msgstr ""
 
-#: arsup.c:428
+#: arsup.c:429
 #, c-format
 msgid "%s: no open  archive\n"
 msgstr ""
@@ -398,325 +407,336 @@ msgstr ""
 msgid "debug_get_real_type: circular debug information for %s\n"
 msgstr ""
 
-#: debug.c:2663
+#: debug.c:2662
 msgid "debug_write_type: illegal type encountered"
 msgstr ""
 
-#: dlltool.c:711 dlltool.c:735 dlltool.c:760
+#: dlltool.c:770 dlltool.c:794 dlltool.c:819
 #, c-format
 msgid "Internal error: Unknown machine type: %d\n"
 msgstr ""
 
-#: dlltool.c:794
+#: dlltool.c:856
 #, c-format
 msgid "Can't open def file: %s"
 msgstr ""
 
-#: dlltool.c:799
+#: dlltool.c:861
 #, c-format
 msgid "Processing def file: %s"
 msgstr ""
 
-#: dlltool.c:803
+#: dlltool.c:865
 msgid "Processed def file"
 msgstr ""
 
-#: dlltool.c:828
+#: dlltool.c:890
 #, c-format
 msgid "Syntax error in def file %s:%d\n"
 msgstr ""
 
-#: dlltool.c:861
+#: dlltool.c:923
 #, c-format
 msgid "NAME: %s base: %x"
 msgstr ""
 
-#: dlltool.c:864
+#: dlltool.c:926
 msgid "Can't have LIBRARY and NAME\n"
 msgstr ""
 
-#: dlltool.c:880
+#: dlltool.c:942
 #, c-format
 msgid "LIBRARY: %s base: %x"
 msgstr ""
 
-#: dlltool.c:883
+#: dlltool.c:945
 #, c-format
 msgid "%s: Can't have LIBRARY and NAME\n"
 msgstr ""
 
-#: dlltool.c:1138
+#: dlltool.c:1200 resrc.c:271
 #, c-format
 msgid "wait: %s"
 msgstr ""
 
-#: dlltool.c:1143
+#: dlltool.c:1205 resrc.c:276
 #, c-format
 msgid "subprocess got fatal signal %d"
 msgstr ""
 
-#: dlltool.c:1149
+#: dlltool.c:1211
 #, c-format
 msgid "%s exited with status %d\n"
 msgstr ""
 
-#: dlltool.c:1181
+#: dlltool.c:1243
 #, c-format
 msgid "Sucking in info from %s section in %s\n"
 msgstr ""
 
-#: dlltool.c:1291
+#: dlltool.c:1367
 #, c-format
 msgid "Excluding symbol: %s\n"
 msgstr ""
 
-#: dlltool.c:1386 dlltool.c:1397 nm.c:902 nm.c:913 objdump.c:379 objdump.c:396
+#: dlltool.c:1462 dlltool.c:1473 nm.c:902 nm.c:913 objdump.c:444 objdump.c:461
 #, c-format
 msgid "%s: no symbols\n"
 msgstr ""
 
 #. FIXME: we ought to read in and block out the base relocations
-#: dlltool.c:1424
+#: dlltool.c:1500
 #, c-format
 msgid "Done reading %s\n"
 msgstr ""
 
-#: dlltool.c:1435
+#: dlltool.c:1511
 #, c-format
 msgid "Unable to open object file: %s"
 msgstr ""
 
-#: dlltool.c:1438
+#: dlltool.c:1514
 #, c-format
 msgid "Scanning object file %s"
 msgstr ""
 
-#: dlltool.c:1453
+#: dlltool.c:1529
 #, c-format
 msgid "Cannot produce mcore-elf dll from archive file: %s"
 msgstr ""
 
-#: dlltool.c:1538
+#: dlltool.c:1621
 msgid "Adding exports to output file"
 msgstr ""
 
-#: dlltool.c:1583
+#: dlltool.c:1666
 msgid "Added exports to output file"
 msgstr ""
 
-#: dlltool.c:1691
+#: dlltool.c:1790
 #, c-format
 msgid "Generating export file: %s\n"
 msgstr ""
 
-#: dlltool.c:1696
+#: dlltool.c:1795
 #, c-format
 msgid "Unable to open temporary assembler file: %s"
 msgstr ""
 
-#: dlltool.c:1699
+#: dlltool.c:1798
 #, c-format
 msgid "Opened temporary file: %s"
 msgstr ""
 
-#: dlltool.c:1918
+#: dlltool.c:2012
 msgid "Generated exports file"
 msgstr ""
 
-#: dlltool.c:2171
+#: dlltool.c:2267
 #, c-format
 msgid "bfd_open failed open stub file: %s"
 msgstr ""
 
-#: dlltool.c:2174
+#: dlltool.c:2270
 #, c-format
 msgid "Creating stub file: %s"
 msgstr ""
 
-#: dlltool.c:2557
+#: dlltool.c:2657
 #, c-format
 msgid "failed to open temporary head file: %s"
 msgstr ""
 
-#: dlltool.c:2623
+#: dlltool.c:2716
 #, c-format
 msgid "failed to open temporary tail file: %s"
 msgstr ""
 
-#: dlltool.c:2698
+#: dlltool.c:2784
 #, c-format
 msgid "Can't open .lib file: %s"
 msgstr ""
 
-#: dlltool.c:2701
+#: dlltool.c:2787
 #, c-format
 msgid "Creating library file: %s\n"
 msgstr ""
 
-#: dlltool.c:2757
+#: dlltool.c:2846
 #, c-format
 msgid "cannot delete %s: %s\n"
 msgstr ""
 
-#: dlltool.c:2761
+#: dlltool.c:2850
 msgid "Created lib file"
 msgstr ""
 
-#: dlltool.c:2862
+#: dlltool.c:2955
 #, c-format
 msgid "Warning, ignoring duplicate EXPORT %s %d,%d\n"
 msgstr ""
 
-#: dlltool.c:2868
+#: dlltool.c:2961
 #, c-format
 msgid "Error, duplicate EXPORT with oridinals: %s"
 msgstr ""
 
-#: dlltool.c:2995
+#: dlltool.c:3088
 msgid "Processing definitions"
 msgstr ""
 
-#: dlltool.c:3033
+#: dlltool.c:3126
 msgid "Processed definitions"
 msgstr ""
 
 #. xgetext:c-format
-#: dlltool.c:3044
+#: dlltool.c:3137
 #, c-format
 msgid "Usage %s <options> <object-files>\n"
 msgstr ""
 
 #. xgetext:c-format
-#: dlltool.c:3046
+#: dlltool.c:3139
 #, c-format
 msgid ""
 "   -m --machine <machine>    Create as DLL for <machine>.  [default: %s]\n"
 msgstr ""
 
-#: dlltool.c:3047
+#: dlltool.c:3140
 msgid ""
-"        possible <machine>: arm[_interwork], i386, mcore[-elf][-le], ppc, "
-"thumb\n"
+"        possible <machine>: arm[_interwork], i386, mcore[-elf]{-le|-be}, "
+"ppc, thumb\n"
 msgstr ""
 
-#: dlltool.c:3048
+#: dlltool.c:3141
 msgid "   -e --output-exp <outname> Generate an export file.\n"
 msgstr ""
 
-#: dlltool.c:3049
+#: dlltool.c:3142
 msgid "   -l --output-lib <outname> Generate an interface library.\n"
 msgstr ""
 
-#: dlltool.c:3050
+#: dlltool.c:3143
 msgid "   -a --add-indirect         Add dll indirects to export file.\n"
 msgstr ""
 
-#: dlltool.c:3051
+#: dlltool.c:3144
 msgid ""
 "   -D --dllname <name>       Name of input dll to put into interface lib.\n"
 msgstr ""
 
-#: dlltool.c:3052
+#: dlltool.c:3145
 msgid "   -d --input-def <deffile>  Name of .def file to be read in.\n"
 msgstr ""
 
-#: dlltool.c:3053
+#: dlltool.c:3146
 msgid "   -z --output-def <deffile> Name of .def file to be created.\n"
 msgstr ""
 
-#: dlltool.c:3054
+#: dlltool.c:3147
 msgid "      --export-all-symbols   Export all symbols to .def\n"
 msgstr ""
 
-#: dlltool.c:3055
+#: dlltool.c:3148
 msgid "      --no-export-all-symbols  Only export listed symbols\n"
 msgstr ""
 
-#: dlltool.c:3056
+#: dlltool.c:3149
 msgid "      --exclude-symbols <list> Don't export <list>\n"
 msgstr ""
 
-#: dlltool.c:3057
+#: dlltool.c:3150
 msgid "      --no-default-excludes  Clear default exclude symbols\n"
 msgstr ""
 
-#: dlltool.c:3058
+#: dlltool.c:3151
 msgid "   -b --base-file <basefile> Read linker generated base file.\n"
 msgstr ""
 
-#: dlltool.c:3059
+#: dlltool.c:3152
 msgid "   -x --no-idata4            Don't generate idata$4 section.\n"
 msgstr ""
 
-#: dlltool.c:3060
+#: dlltool.c:3153
 msgid "   -c --no-idata5            Don't generate idata$5 section.\n"
 msgstr ""
 
-#: dlltool.c:3061
+#: dlltool.c:3154
 msgid ""
 "   -U --add-underscore       Add underscores to symbols in interface "
 "library.\n"
 msgstr ""
 
-#: dlltool.c:3062
+#: dlltool.c:3155
 msgid "   -k --kill-at              Kill @<n> from exported names.\n"
 msgstr ""
 
-#: dlltool.c:3063
+#: dlltool.c:3156
 msgid "   -A --add-stdcall-alias    Add aliases without @<n>.\n"
 msgstr ""
 
-#: dlltool.c:3064
+#: dlltool.c:3157
 msgid "   -S --as <name>            Use <name> for assembler.\n"
 msgstr ""
 
-#: dlltool.c:3065
+#: dlltool.c:3158
 msgid "   -f --as-flags <flags>     Pass <flags> to the assembler.\n"
 msgstr ""
 
-#: dlltool.c:3066
+#: dlltool.c:3159
+msgid ""
+"   -C --compat-implib        Create backward compatible import library.\n"
+msgstr ""
+
+#: dlltool.c:3160
 msgid ""
 "   -n --no-delete            Keep temp files (repeat for extra "
 "preservation).\n"
 msgstr ""
 
-#: dlltool.c:3067
+#: dlltool.c:3161
 msgid "   -v --verbose              Be verbose.\n"
 msgstr ""
 
-#: dlltool.c:3068
+#: dlltool.c:3162
 msgid "   -V --version              Display the program version.\n"
 msgstr ""
 
-#: dlltool.c:3069
+#: dlltool.c:3163
 msgid "   -h --help                 Display this information.\n"
 msgstr ""
 
-#: dlltool.c:3071
+#: dlltool.c:3165
 msgid ""
 "   -M --mcore-elf <outname>  Process mcore-elf object files into <outname>.\n"
 msgstr ""
 
-#: dlltool.c:3072
+#: dlltool.c:3166
 msgid "   -L --linker <name>        Use <name> as the linker.\n"
 msgstr ""
 
-#: dlltool.c:3073
+#: dlltool.c:3167
 msgid "   -F --linker-flags <flags> Pass <flags> to the linker.\n"
 msgstr ""
 
-#: dlltool.c:3216
+#: dlltool.c:3311
 #, c-format
 msgid "Unable to open base-file: %s"
 msgstr ""
 
-#: dlltool.c:3242
+#: dlltool.c:3340
 #, c-format
 msgid "Machine '%s' not supported"
 msgstr ""
 
-#: dlltool.c:3385
-msgid "buffer overflow\n"
+#: dlltool.c:3443 dllwrap.c:215
+#, c-format
+msgid "Tried file: %s"
+msgstr ""
+
+#: dlltool.c:3450 dllwrap.c:222
+#, c-format
+msgid "Using file: %s"
 msgstr ""
 
 #: ieee.c:316
@@ -1216,318 +1236,441 @@ msgid ""
 "Archive index:\n"
 msgstr ""
 
-#: objcopy.c:293
-#, c-format
-msgid ""
-"Usage: %s [-vVSpgxX] [-I bfdname] [-O bfdname] [-F bfdname] [-b byte]\n"
-"       [-R section] [-i interleave] [--interleave=interleave] [--byte=byte]\n"
-"       [--input-target=bfdname] [--output-target=bfdname] "
-"[--target=bfdname]\n"
-"       [--strip-all] [--strip-debug] [--strip-unneeded] [--discard-all]\n"
-"       [--discard-locals] [--debugging] [--remove-section=section]\n"
+#: objcopy.c:296
+#, c-format
+msgid "Usage: %s <switches> in-file [out-file]\n"
+msgstr ""
+
+#: objcopy.c:297 objcopy.c:354
+msgid " The switches are:\n"
+msgstr ""
+
+#: objcopy.c:298
+msgid ""
+"  -I --input-target <bfdname>      Assume input file is in format <bfdname>\n"
+"  -O --output-target <bfdname>     Create an output file in format "
+"<bfdname>\n"
+"  -F --target <bfdname>            Set both input and output format to "
+"<bfdname>\n"
+"     --debugging                   Convert debugging information, if "
+"possible\n"
+"  -p --preserve-dates              Copy modified/access timestamps to the "
+"output\n"
+"  -j --only-section <name>         Only copy section <name> into the output\n"
+"  -R --remove-section <name>       Remove section <name> from the output\n"
+"  -S --strip-all                   Remove all symbol and relocation "
+"information\n"
+"  -g --strip-debug                 Remove all debugging symbols\n"
+"     --strip-unneeded              Remove all symbols not needed by "
+"relocations\n"
+"  -N --strip-symbol <name>         Do not copy symbol <name>\n"
+"  -K --keep-symbol <name>          Only copy symbol <name>\n"
+"  -L --localize-symbol <name>      Force symbol <name> to be marked as a "
+"local\n"
+"  -W --weaken-symbol <name>        Force symbol <name> to be marked as a "
+"weak\n"
+"     --weaken                      Force all global symbols to be marked as "
+"weak\n"
+"  -x --discard-all                 Remove all non-global symbols\n"
+"  -X --discard-locals              Remove any compiler-generated symbols\n"
+"  -i --interleave <number>         Only copy one out of every <number> "
+"bytes\n"
+"  -b --byte <num>                  Select byte <num> in every interleaved "
+"block\n"
+"     --gap-fill <val>              Fill gaps between sections with <val>\n"
+"     --pad-to <addr>               Pad the last section up to address "
+"<addr>\n"
+"     --set-start <addr>            Set the start address to <addr>\n"
+"    {--change-start|--adjust-start} <incr>\n"
+"                                   Add <incr> to the start address\n"
+"    {--change-addresses|--adjust-vma} <incr>\n"
+"                                   Add <incr> to LMA, VMA and start "
+"addresses\n"
+"    {--change-section-address|--adjust-section-vma} <name>{=|+|-}<val>\n"
+"                                   Change LMA and VMA of section <name> by "
+"<val>\n"
+"     --change-section-lma <name>{=|+|-}<val>\n"
+"                                   Change the LMA of section <name> by "
+"<val>\n"
+"     --change-section-vma <name>{=|+|-}<val>\n"
+"                                   Change the VMA of section <name> by "
+"<val>\n"
+"    {--[no-]change-warnings|--[no-]adjust-warnings}\n"
+"                                   Warn if a named section does not exist\n"
+"     --set-section-flags <name>=<flags>\n"
+"                                   Set section <name>'s properties to "
+"<flags>\n"
+"     --add-section <name>=<file>   Add section <name> found in <file> to "
+"output\n"
+"     --change-leading-char         Force output format's leading character "
+"style\n"
+"     --remove-leading-char         Remove leading character from global "
+"symbols\n"
+"  -v --verbose                     List all object files modified\n"
+"  -V --version                     Display this program's version number\n"
+"  -h --help                        Display this output\n"
 msgstr ""
 
-#: objcopy.c:300
-msgid ""
-"       [--gap-fill=val] [--pad-to=address] [--preserve-dates]\n"
-"       [--set-start=val] \n"
-"       [--change-start=incr] [--change-addresses=incr] \n"
-"       (--adjust-start   and  --adjust-vma are aliases for these two) \n"
-"       [--change-section-address=section{=,+,-}val]\n"
-"       (--adjust-section-vma is an alias for --change-section-address)\n"
-"       [--change-section-lma=section{=,+,-}val]\n"
-"       [--change-section-vma=section{=,+,-}val]\n"
-"       [--adjust-warnings] [--no-adjust-warnings]\n"
-"       [--change-warnings] [--no-change-warnings]\n"
-"       [--set-section-flags=section=flags] "
-"[--add-section=sectionname=filename]\n"
-"       [--keep-symbol symbol] [-K symbol] [--strip-symbol symbol] [-N "
-"symbol]\n"
-"       [--localize-symbol symbol] [-L symbol] [--weaken-symbol symbol]\n"
-"       [-W symbol] [--change-leading-char] [--remove-leading-char] "
-"[--weaken]\n"
-"       [--verbose] [--version] [--help] in-file [out-file]\n"
+#: objcopy.c:353
+#, c-format
+msgid "Usage: %s <switches> in-file(s)\n"
 msgstr ""
 
-#: objcopy.c:327
-#, c-format
+#: objcopy.c:355
 msgid ""
-"Usage: %s [-vVsSpgxX] [-I bfdname] [-O bfdname] [-F bfdname] [-R section]\n"
-"       [--input-target=bfdname] [--output-target=bfdname] "
-"[--target=bfdname]\n"
-"       [--strip-all] [--strip-debug] [--strip-unneeded] [--discard-all]\n"
-"       [--discard-locals] [--keep-symbol symbol] [-K symbol]\n"
-"       [--strip-symbol symbol] [-N symbol] [--remove-section=section]\n"
-"       [-o file] [--preserve-dates] [--verbose] [--version] [--help] "
-"file...\n"
+"  -I --input-target <bfdname>      Assume input file is in format <bfdname>\n"
+"  -O --output-target <bfdname>     Create an output file in format "
+"<bfdname>\n"
+"  -F --target <bfdname>            Set both input and output format to "
+"<bfdname>\n"
+"  -p --preserve-dates              Copy modified/access timestamps to the "
+"output\n"
+"  -R --remove-section <name>       Remove section <name> from the output\n"
+"  -s --strip-all                   Remove all symbol and relocation "
+"information\n"
+"  -g -S --strip-debug              Remove all debugging symbols\n"
+"     --strip-unneeded              Remove all symbols not needed by "
+"relocations\n"
+"  -N --strip-symbol <name>         Do not copy symbol <name>\n"
+"  -K --keep-symbol <name>          Only copy symbol <name>\n"
+"  -x --discard-all                 Remove all non-global symbols\n"
+"  -X --discard-locals              Remove any compiler-generated symbols\n"
+"  -v --verbose                     List all object files modified\n"
+"  -V --version                     Display this program's version number\n"
+"  -h --help                        Display this output\n"
+"  -o <file>                        Place stripped output into <file>\n"
 msgstr ""
 
-#: objcopy.c:383
+#: objcopy.c:425
 #, c-format
 msgid "unrecognized section flag `%s'"
 msgstr ""
 
-#: objcopy.c:384
-msgid "supported flags: alloc, load, readonly, code, data, rom, contents"
+#: objcopy.c:426
+msgid ""
+"supported flags: alloc, load, noload, readonly, debug, code, data, rom, "
+"share, contents"
 msgstr ""
 
-#: objcopy.c:623
+#: objcopy.c:671
 #, c-format
 msgid "copy from %s(%s) to %s(%s)\n"
 msgstr ""
 
-#: objcopy.c:642
+#: objcopy.c:690
 #, c-format
 msgid "Warning: Output file cannot represent architecture %s"
 msgstr ""
 
-#: objcopy.c:669
+#: objcopy.c:717
 #, c-format
 msgid "can't create section `%s': %s"
 msgstr ""
 
-#: objcopy.c:755
+#: objcopy.c:803
 #, c-format
 msgid "Can't fill gap after %s: %s"
 msgstr ""
 
-#: objcopy.c:780
+#: objcopy.c:828
 #, c-format
 msgid "Can't add padding to %s: %s"
 msgstr ""
 
-#: objcopy.c:916
+#: objcopy.c:965
 #, c-format
 msgid "%s: error copying private BFD data: %s"
 msgstr ""
 
-#: objcopy.c:950
+#: objcopy.c:999
 #, c-format
 msgid "cannot mkdir %s for archive copying (error: %s)"
 msgstr ""
 
-#: objcopy.c:1217
+#: objcopy.c:1268
 #, c-format
 msgid "%s: section `%s': error in %s: %s"
 msgstr ""
 
-#: objcopy.c:1489
+#: objcopy.c:1542
 #, c-format
 msgid "%s: can't create debugging section: %s"
 msgstr ""
 
-#: objcopy.c:1504
+#: objcopy.c:1557
 #, c-format
 msgid "%s: can't set debugging section contents: %s"
 msgstr ""
 
-#: objcopy.c:1513
+#: objcopy.c:1566
 #, c-format
 msgid "%s: don't know how to write debugging information for %s"
 msgstr ""
 
-#: objcopy.c:1618
+#: objcopy.c:1671
 #, c-format
 msgid "%s: cannot stat: %s"
 msgstr ""
 
-#: objcopy.c:1668
+#: objcopy.c:1721
 msgid "byte number must be non-negative"
 msgstr ""
 
-#: objcopy.c:1673
+#: objcopy.c:1726
 msgid "interleave must be positive"
 msgstr ""
 
-#: objcopy.c:1742
+#: objcopy.c:1742 objcopy.c:1749
+#, c-format
+msgid "%s both copied and removed"
+msgstr ""
+
+#: objcopy.c:1804
 msgid "bad format for --add-section NAME=FILENAME"
 msgstr ""
 
-#: objcopy.c:1745
+#: objcopy.c:1807
 #, c-format
 msgid "cannot stat: %s: %s"
 msgstr ""
 
-#: objcopy.c:1763
+#: objcopy.c:1825
 #, c-format
 msgid "cannot open: %s: %s"
 msgstr ""
 
-#: objcopy.c:1767
+#: objcopy.c:1829
 #, c-format
 msgid "%s: fread failed"
 msgstr ""
 
-#: objcopy.c:1804
+#: objcopy.c:1872
 #, c-format
 msgid "bad format for %s"
 msgstr ""
 
-#: objcopy.c:1868
+#: objcopy.c:1936
 #, c-format
 msgid "Warning: truncating gap-fill from 0x%s to 0x%x"
 msgstr ""
 
-#: objcopy.c:1892
+#: objcopy.c:1960
 msgid "bad format for --set-section-flags"
 msgstr ""
 
-#: objcopy.c:1922
+#: objcopy.c:1990
 msgid "byte number must be less than interleave"
 msgstr ""
 
-#: objcopy.c:1941
+#: objcopy.c:2009
 #, c-format
 msgid "Cannot stat: %s: %s"
 msgstr ""
 
-#: objcopy.c:1981
+#: objcopy.c:2049
 #, c-format
 msgid "Warning: --change-section-vma %s%c0x%s never used"
 msgstr ""
 
-#: objcopy.c:1994
+#: objcopy.c:2062
 #, c-format
 msgid "Warning: --change-section-lma %s%c0x%s never used"
 msgstr ""
 
-#: objdump.c:219
+#: objdump.c:229
 #, c-format
-msgid ""
-"Usage: %s [-ahifCdDprRtTxsSlw] [-b bfdname] [-m machine] [-j section-name]\n"
-"       [--archive-headers] [--target=bfdname] [--debugging] [--disassemble]\n"
-"       [--disassemble-all] [--disassemble-zeroes] [--file-headers]\n"
-"       [--section-headers] [--headers]\n"
-"       [--info] [--section=section-name] [--line-numbers] [--source]\n"
+msgid "Usage: %s <switches> file(s)\n"
 msgstr ""
 
-#: objdump.c:226
-msgid ""
-"       [--architecture=machine] [--reloc] [--full-contents] [--stabs]\n"
-"       [--syms] [--all-headers] [--dynamic-syms] [--dynamic-reloc]\n"
-"       [--wide] [--version] [--help] [--private-headers]\n"
-"       [--start-address=addr] [--stop-address=addr]\n"
-"       [--prefix-addresses] [--[no-]show-raw-insn] [--demangle]\n"
-"       [--adjust-vma=offset] [-EB|-EL] [--endian={big|little}] objfile...\n"
-"at least one option besides -l (--line-numbers) must be given\n"
+#: objdump.c:230
+msgid " At least one of the following switches must be given:\n"
 msgstr ""
 
-#: objdump.c:361
+#: objdump.c:231
+msgid ""
+"  -a  --archive-headers    Display archive header information\n"
+"  -f  --file-headers       Display the contents of the overall file header\n"
+"  -p  --private-headers    Display object format specific file header "
+"contents\n"
+"  -h  --[section-]headers  Display the contents of the section headers\n"
+"  -x  --all-headers        Display the contents of all headers\n"
+"  -d  --disassemble        Display assembler contents of executable "
+"sections\n"
+"  -D  --disassemble-all    Display assembler contents of all sections\n"
+"  -S  --source             Intermix source code with disassembly\n"
+"  -s  --full-contents      Display the full contents of all sections "
+"requested\n"
+"  -g  --debugging          Display debug information in object file\n"
+"  -G  --stabs              Display the STABS contents of an ELF format file\n"
+"  -t  --syms               Display the contents of the symbol table(s)\n"
+"  -T  --dynamic-syms       Display the contents of the dynamic symbol table\n"
+"  -r  --reloc              Display the relocation entries in the file\n"
+"  -R  --dynamic-reloc      Display the dynamic relocation entries in the "
+"file\n"
+"  -V  --version            Display this program's version number\n"
+"  -i  --info               List object formats and architectures supported\n"
+"  -H  --help               Display this information\n"
+msgstr ""
+
+#: objdump.c:253
+msgid ""
+"\n"
+" The following switches are optional:\n"
+msgstr ""
+
+#: objdump.c:254
+msgid ""
+"  -b  --target <bfdname>         Specify the target object format as "
+"<bfdname>\n"
+"  -m  --architecture <machine>   Specify the target architecture as "
+"<machine>\n"
+"  -j  --section <name>           Only display information for section "
+"<name>\n"
+"  -M  --disassembler-options <o> Pass text <o> on to the disassembler\n"
+"  -EB --endian=big               Assume big endian format when "
+"disassembling\n"
+"  -EL --endian=little            Assume little endian format when "
+"disassembling\n"
+"      --file-start-context       Include context from start of file (with "
+"-S)\n"
+"  -l  --line-numbers             Include line numbers and filenames in "
+"output\n"
+"  -C  --demangle                 Decode mangled/processed symbol names\n"
+"  -w  --wide                     Format output for more than 80 columns\n"
+"  -z  --disassemble-zeroes       Do not skip blocks of zeroes when "
+"disassembling\n"
+"      --start-address <addr>     Only process data whoes address is >= "
+"<addr>\n"
+"      --stop-address <addr>      Only process data whoes address is <= "
+"<addr>\n"
+"      --prefix-addresses         Print complete address alongside "
+"disassembly\n"
+"      --[no-]show-raw-insn       Display hex alongside symbolic disassembly\n"
+"      --adjust-vma <offset>      Add <offset> to all displayed section "
+"addresses\n"
+"\n"
+msgstr ""
+
+#: objdump.c:420
 msgid "Sections:\n"
 msgstr ""
 
-#: objdump.c:363
-msgid "Idx Name          Size      VMA       LMA       File off  Algn\n"
+#: objdump.c:423
+msgid "Idx Name          Size      VMA       LMA       File off  Algn"
 msgstr ""
 
-#: objdump.c:365
+#: objdump.c:425
 msgid ""
 "Idx Name          Size      VMA               LMA               File off  "
-"Algn\n"
+"Algn"
+msgstr ""
+
+#: objdump.c:429
+msgid "  Flags"
 msgstr ""
 
-#: objdump.c:414
+#: objdump.c:479
 #, c-format
 msgid "%s: %s: not a dynamic object\n"
 msgstr ""
 
-#: objdump.c:431
+#: objdump.c:496
 #, c-format
 msgid "%s: %s: No dynamic symbols\n"
 msgstr ""
 
-#: objdump.c:1131
+#: objdump.c:1200
 msgid "Out of virtual memory\n"
 msgstr ""
 
-#: objdump.c:1532
+#: objdump.c:1611
 #, c-format
 msgid "%s: Can't use supplied machine %s\n"
 msgstr ""
 
-#: objdump.c:1553
+#: objdump.c:1632
 #, c-format
 msgid "%s: Can't disassemble for architecture %s\n"
 msgstr ""
 
-#: objdump.c:1627
+#: objdump.c:1709
 #, c-format
 msgid "Disassembly of section %s:\n"
 msgstr ""
 
-#: objdump.c:1798
+#: objdump.c:1883
 #, c-format
 msgid ""
 "No %s section present\n"
 "\n"
 msgstr ""
 
-#: objdump.c:1805
+#: objdump.c:1890
 #, c-format
 msgid "%s: %s has no %s section\n"
 msgstr ""
 
-#: objdump.c:1818 objdump.c:1829
+#: objdump.c:1904 objdump.c:1916
 #, c-format
 msgid "%s: Reading %s section of %s failed: %s\n"
 msgstr ""
 
-#: objdump.c:1871
+#: objdump.c:1959
 #, c-format
 msgid ""
 "Contents of %s section:\n"
 "\n"
 msgstr ""
 
-#: objdump.c:1971
+#: objdump.c:2059
 #, c-format
 msgid "architecture: %s, "
 msgstr ""
 
-#: objdump.c:1974
+#: objdump.c:2062
 #, c-format
 msgid "flags 0x%08x:\n"
 msgstr ""
 
-#: objdump.c:1987
+#: objdump.c:2075
 msgid ""
 "\n"
 "start address 0x"
 msgstr ""
 
-#: objdump.c:2030
+#: objdump.c:2107
 #, c-format
 msgid ""
 "\n"
 "%s:     file format %s\n"
 msgstr ""
 
-#: objdump.c:2071
+#: objdump.c:2150
 #, c-format
 msgid "%s: printing debugging information failed\n"
 msgstr ""
 
-#: objdump.c:2105
+#: objdump.c:2227
 #, c-format
 msgid "In archive %s:\n"
 msgstr ""
 
-#: objdump.c:2158
+#: objdump.c:2279
 #, c-format
 msgid "Contents of section %s:\n"
 msgstr ""
 
-#: objdump.c:2664
+#: objdump.c:2788
 #, c-format
 msgid "BFD header file version %s\n"
 msgstr ""
 
-#: objdump.c:2789
+#: objdump.c:2861
 #, c-format
 msgid "%s: unrecognized -E option\n"
 msgstr ""
 
-#: objdump.c:2800
+#: objdump.c:2873
 #, c-format
 msgid "%s: unrecognized --endian type `%s'\n"
 msgstr ""
@@ -1566,889 +1709,902 @@ msgstr ""
 msgid "Last stabs entries before error:\n"
 msgstr ""
 
-#: readelf.c:237 readelf.c:263
+#: readelf.c:301 readelf.c:327
 #, c-format
 msgid "%s: Error: "
 msgstr ""
 
-#: readelf.c:249 readelf.c:278
+#: readelf.c:313 readelf.c:342
 #, c-format
 msgid "%s: Warning: "
 msgstr ""
 
-#: readelf.c:308 readelf.c:333
+#: readelf.c:392 readelf.c:530
 #, c-format
 msgid "Unhandled data length: %d\n"
 msgstr ""
 
-#: readelf.c:372
+#: readelf.c:589
 msgid "Don't know about relocations on this machine architecture\n"
 msgstr ""
 
-#: readelf.c:410 readelf.c:439
+#: readelf.c:629 readelf.c:658 readelf.c:690 readelf.c:718
 msgid "out of memory parsing relocs"
 msgstr ""
 
-#: readelf.c:456
+#: readelf.c:736
 msgid ""
 "  Offset    Info  Type            Symbol's Value  Symbol's Name          "
 "Addend\n"
 msgstr ""
 
-#: readelf.c:459
+#: readelf.c:739
 msgid "  Offset    Info  Type            Symbol's Value  Symbol's Name\n"
 msgstr ""
 
-#: readelf.c:567
+#: readelf.c:879 readelf.c:881
 #, c-format
 msgid "unrecognised: %-7lx"
 msgstr ""
 
-#: readelf.c:585
+#: readelf.c:906
 #, c-format
 msgid "<string table index %3ld>"
 msgstr ""
 
-#: readelf.c:739
+#: readelf.c:1113
 #, c-format
 msgid "Processor Specific: %lx"
 msgstr ""
 
-#: readelf.c:742
+#: readelf.c:1132
 #, c-format
 msgid "Operating System specific: %lx"
 msgstr ""
 
-#: readelf.c:744 readelf.c:996
+#: readelf.c:1135 readelf.c:1500
 #, c-format
 msgid "<unknown>: %lx"
 msgstr ""
 
-#: readelf.c:758
+#: readelf.c:1149
 msgid "NONE (None)"
 msgstr ""
 
-#: readelf.c:759
+#: readelf.c:1150
 msgid "REL (Relocatable file)"
 msgstr ""
 
-#: readelf.c:760
+#: readelf.c:1151
 msgid "EXEC (Executable file)"
 msgstr ""
 
-#: readelf.c:761
+#: readelf.c:1152
 msgid "DYN (Shared object file)"
 msgstr ""
 
-#: readelf.c:762
+#: readelf.c:1153
 msgid "CORE (Core file)"
 msgstr ""
 
-#: readelf.c:766
+#: readelf.c:1157
 #, c-format
 msgid "Processor Specific: (%x)"
 msgstr ""
 
-#: readelf.c:768
+#: readelf.c:1159
 #, c-format
 msgid "OS Specific: (%x)"
 msgstr ""
 
-#: readelf.c:770 readelf.c:829 readelf.c:932 readelf.c:1107
+#: readelf.c:1161 readelf.c:1238 readelf.c:1632
 #, c-format
 msgid "<unknown>: %x"
 msgstr ""
 
-#: readelf.c:783
+#: readelf.c:1174
 msgid "None"
 msgstr ""
 
-#: readelf.c:929
-msgid "ELFDATA2LSB (little endian)"
-msgstr ""
-
-#: readelf.c:930
-msgid "ELFDATA2MSB (big endian)"
-msgstr ""
-
-#: readelf.c:1143
+#: readelf.c:1670
 msgid "Usage: readelf {options} elf-file(s)\n"
 msgstr ""
 
-#: readelf.c:1144
+#: readelf.c:1671
 msgid "  Options are:\n"
 msgstr ""
 
-#: readelf.c:1145
-msgid ""
-"  -a or --all               Equivalent to: -h -l -S -s -r -d -V --histogram\n"
+#: readelf.c:1672
+msgid "  -a or --all               Equivalent to: -h -l -S -s -r -d -V -A -I\n"
 msgstr ""
 
-#: readelf.c:1146
+#: readelf.c:1673
 msgid "  -h or --file-header       Display the ELF file header\n"
 msgstr ""
 
-#: readelf.c:1147
+#: readelf.c:1674
 msgid "  -l or --program-headers or --segments\n"
 msgstr ""
 
-#: readelf.c:1148
+#: readelf.c:1675
 msgid "                            Display the program headers\n"
 msgstr ""
 
-#: readelf.c:1149
+#: readelf.c:1676
 msgid "  -S or --section-headers or --sections\n"
 msgstr ""
 
-#: readelf.c:1150
+#: readelf.c:1677
 msgid "                            Display the sections' header\n"
 msgstr ""
 
-#: readelf.c:1151
+#: readelf.c:1678
 msgid "  -e or --headers           Equivalent to: -h -l -S\n"
 msgstr ""
 
-#: readelf.c:1152
+#: readelf.c:1679
 msgid "  -s or --syms or --symbols Display the symbol table\n"
 msgstr ""
 
-#: readelf.c:1153
+#: readelf.c:1680
+msgid "  -n or --notes             Display the core notes (if present)\n"
+msgstr ""
+
+#: readelf.c:1681
 msgid "  -r or --relocs            Display the relocations (if present)\n"
 msgstr ""
 
-#: readelf.c:1154
+#: readelf.c:1682
 msgid "  -d or --dynamic           Display the dynamic segment (if present)\n"
 msgstr ""
 
-#: readelf.c:1155
+#: readelf.c:1683
 msgid "  -V or --version-info      Display the version sections (if present)\n"
 msgstr ""
 
-#: readelf.c:1156
+#: readelf.c:1684
+msgid ""
+"  -A or --arch-specific     Display architecture specific information (if "
+"any).\n"
+msgstr ""
+
+#: readelf.c:1685
 msgid ""
 "  -D or --use-dynamic       Use the dynamic section info when displaying "
 "symbols\n"
 msgstr ""
 
-#: readelf.c:1157
+#: readelf.c:1686
 msgid "  -x <number> or --hex-dump=<number>\n"
 msgstr ""
 
-#: readelf.c:1158
+#: readelf.c:1687
 msgid "                            Dump the contents of section <number>\n"
 msgstr ""
 
-#: readelf.c:1159
+#: readelf.c:1688
 msgid "  -w[liapr] or --debug-dump[=line,=info,=abbrev,=pubnames,=ranges]\n"
 msgstr ""
 
-#: readelf.c:1160
+#: readelf.c:1689
 msgid ""
 "                            Display the contents of DWARF2 debug sections\n"
 msgstr ""
 
-#: readelf.c:1162
+#: readelf.c:1691
 msgid "  -i <number> or --instruction-dump=<number>\n"
 msgstr ""
 
-#: readelf.c:1163
+#: readelf.c:1692
 msgid ""
 "                            Disassemble the contents of section <number>\n"
 msgstr ""
 
-#: readelf.c:1165
-msgid "        --histogram         Display histogram of bucket list lengths\n"
+#: readelf.c:1694
+msgid "  -I or --histogram         Display histogram of bucket list lengths\n"
 msgstr ""
 
-#: readelf.c:1166
+#: readelf.c:1695
 msgid "  -v or --version           Display the version number of readelf\n"
 msgstr ""
 
-#: readelf.c:1167
+#: readelf.c:1696
 msgid "  -H or --help              Display this information\n"
 msgstr ""
 
-#: readelf.c:1185
+#: readelf.c:1714
 msgid "Out of memory allocating dump request table."
 msgstr ""
 
-#: readelf.c:1309
+#: readelf.c:1849
 #, c-format
 msgid "Unrecognised debug option '%s'\n"
 msgstr ""
 
-#: readelf.c:1334
+#: readelf.c:1874
 #, c-format
 msgid "Invalid option '-%c'\n"
 msgstr ""
 
-#: readelf.c:1347
+#: readelf.c:1887
 msgid "Nothing to do.\n"
 msgstr ""
 
-#: readelf.c:1360 readelf.c:1377 readelf.c:2531
+#: readelf.c:1900 readelf.c:1917 readelf.c:3484
 msgid "none"
 msgstr ""
 
-#: readelf.c:1361
+#: readelf.c:1901
 msgid "ELF32"
 msgstr ""
 
-#: readelf.c:1362
+#: readelf.c:1902
 msgid "ELF64"
 msgstr ""
 
-#: readelf.c:1364 readelf.c:1381 readelf.c:1398
+#: readelf.c:1904 readelf.c:1921 readelf.c:1940
 #, c-format
-msgid "<unknown: %lx>"
+msgid "<unknown: %x>"
 msgstr ""
 
-#: readelf.c:1378
+#: readelf.c:1918
 msgid "2's complement, little endian"
 msgstr ""
 
-#: readelf.c:1379
+#: readelf.c:1919
 msgid "2's complement, big endian"
 msgstr ""
 
-#: readelf.c:1394
+#: readelf.c:1934
 msgid "UNIX - System V"
 msgstr ""
 
-#: readelf.c:1395
+#: readelf.c:1935
 msgid "UNIX - HP-UX"
 msgstr ""
 
-#: readelf.c:1396
+#: readelf.c:1936
+msgid "UNIX - Linux"
+msgstr ""
+
+#: readelf.c:1937
 msgid "Standalone App"
 msgstr ""
 
-#: readelf.c:1413
+#: readelf.c:1938
+msgid "ARM"
+msgstr ""
+
+#: readelf.c:1955
 msgid "Not an ELF file - it has the wrong magic bytes at the start\n"
 msgstr ""
 
-#: readelf.c:1421
+#: readelf.c:1963
 msgid "ELF Header:\n"
 msgstr ""
 
-#: readelf.c:1422
+#: readelf.c:1964
 msgid "  Magic:   "
 msgstr ""
 
-#: readelf.c:1426
+#: readelf.c:1968
 #, c-format
 msgid "  Class:                             %s\n"
 msgstr ""
 
-#: readelf.c:1428 readelf.c:1445
+#: readelf.c:1970
 #, c-format
 msgid "  Data:                              %s\n"
 msgstr ""
 
-#: readelf.c:1430
+#: readelf.c:1972
 #, c-format
 msgid "  Version:                           %d %s\n"
 msgstr ""
 
-#: readelf.c:1435
+#: readelf.c:1979
 #, c-format
 msgid "  OS/ABI:                            %s\n"
 msgstr ""
 
-#: readelf.c:1437
+#: readelf.c:1981
 #, c-format
 msgid "  ABI Version:                       %d\n"
 msgstr ""
 
-#: readelf.c:1439
+#: readelf.c:1983
 #, c-format
 msgid "  Type:                              %s\n"
 msgstr ""
 
-#: readelf.c:1441
+#: readelf.c:1985
 #, c-format
 msgid "  Machine:                           %s\n"
 msgstr ""
 
-#: readelf.c:1443
+#: readelf.c:1987
 #, c-format
 msgid "  Version:                           0x%lx\n"
 msgstr ""
 
-#: readelf.c:1447
-#, c-format
-msgid "  Entry point address:               0x%lx\n"
+#: readelf.c:1990
+msgid "  Entry point address:               "
 msgstr ""
 
-#: readelf.c:1449
-#, c-format
-msgid "  Start of program headers:          %ld (bytes into file)\n"
+#: readelf.c:1992
+msgid ""
+"\n"
+"  Start of program headers:          "
 msgstr ""
 
-#: readelf.c:1451
-#, c-format
-msgid "  Start of section headers:          %ld (bytes into file)\n"
+#: readelf.c:1994
+msgid ""
+" (bytes into file)\n"
+"  Start of section headers:          "
+msgstr ""
+
+#: readelf.c:1996
+msgid " (bytes into file)\n"
 msgstr ""
 
-#: readelf.c:1453
+#: readelf.c:1998
 #, c-format
 msgid "  Flags:                             0x%lx%s\n"
 msgstr ""
 
-#: readelf.c:1456
+#: readelf.c:2001
 #, c-format
 msgid "  Size of this header:               %ld (bytes)\n"
 msgstr ""
 
-#: readelf.c:1458
+#: readelf.c:2003
 #, c-format
 msgid "  Size of program headers:           %ld (bytes)\n"
 msgstr ""
 
-#: readelf.c:1460
+#: readelf.c:2005
 #, c-format
 msgid "  Number of program headers:         %ld\n"
 msgstr ""
 
-#: readelf.c:1462
+#: readelf.c:2007
 #, c-format
 msgid "  Size of section headers:           %ld (bytes)\n"
 msgstr ""
 
-#: readelf.c:1464
+#: readelf.c:2009
 #, c-format
 msgid "  Number of section headers:         %ld\n"
 msgstr ""
 
-#: readelf.c:1466
+#: readelf.c:2011
 #, c-format
 msgid "  Section header string table index: %ld\n"
 msgstr ""
 
-#: readelf.c:1476
-msgid "Not a 32 bit ELF file\n"
-msgstr ""
-
-#: readelf.c:1496
+#: readelf.c:2096
 msgid ""
 "\n"
 "There are no program headers in this file.\n"
 msgstr ""
 
-#: readelf.c:1502
+#: readelf.c:2102
 #, c-format
 msgid ""
 "\n"
-"Elf file is %s\n"
+"Elf file type is %s\n"
 msgstr ""
 
-#: readelf.c:1503
-#, c-format
-msgid "Entry point 0x%lx\n"
+#: readelf.c:2103
+msgid "Entry point "
 msgstr ""
 
-#: readelf.c:1504
+#: readelf.c:2105
 #, c-format
-msgid "There are %d program headers, starting at offset %lx:\n"
+msgid ""
+"\n"
+"There are %d program headers, starting at offset "
 msgstr ""
 
-#: readelf.c:1517 readelf.c:1668 readelf.c:1711 readelf.c:2090 readelf.c:2214
-#: readelf.c:3115 readelf.c:3129
+#: readelf.c:2116 readelf.c:2292 readelf.c:2334 readelf.c:2377 readelf.c:2418
+#: readelf.c:2926 readelf.c:2967 readelf.c:3143 readelf.c:4102 readelf.c:4116
+#: readelf.c:7014 readelf.c:7054
 msgid "Out of memory\n"
 msgstr ""
 
-#: readelf.c:1540
+#: readelf.c:2134
 #, c-format
 msgid ""
 "\n"
 "Program Header%s:\n"
 msgstr ""
 
-#: readelf.c:1542
+#: readelf.c:2138
 msgid ""
-"  Type        Offset   VirtAddr   PhysAddr   FileSiz MemSiz  Flg Align\n"
+"  Type           Offset   VirtAddr   PhysAddr   FileSiz MemSiz  Flg Align\n"
 msgstr ""
 
-#: readelf.c:1578
+#: readelf.c:2142
+msgid "  Type           Offset             VirtAddr           PhysAddr\n"
+msgstr ""
+
+#: readelf.c:2144
+msgid "                 FileSiz            MemSiz              Flags  Align\n"
+msgstr ""
+
+#: readelf.c:2202
 msgid "more than one dynamic segment\n"
 msgstr ""
 
-#: readelf.c:1586
+#: readelf.c:2210
 msgid "Unable to find program interpreter name\n"
 msgstr ""
 
-#: readelf.c:1593
+#: readelf.c:2217
 #, c-format
 msgid ""
 "\n"
 "      [Requesting program interpreter: %s]"
 msgstr ""
 
-#: readelf.c:1611
+#: readelf.c:2235
 msgid ""
 "\n"
 " Section to Segment mapping:\n"
 msgstr ""
 
-#: readelf.c:1612
+#: readelf.c:2236
 msgid "  Segment Sections...\n"
 msgstr ""
 
-#: readelf.c:1746
+#: readelf.c:2499
 msgid ""
 "\n"
 "There are no sections in this file.\n"
 msgstr ""
 
-#: readelf.c:1752
+#: readelf.c:2505
 #, c-format
-msgid "There are %d section headers, starting at offset %lx:\n"
+msgid "There are %d section headers, starting at offset 0x%lx:\n"
 msgstr ""
 
-#: readelf.c:1786
+#: readelf.c:2545
 msgid "File contains multiple dynamic symbol tables\n"
 msgstr ""
 
-#: readelf.c:1799
+#: readelf.c:2558
 msgid "File contains multiple dynamic string tables\n"
 msgstr ""
 
-#: readelf.c:1826
+#: readelf.c:2585
 #, c-format
 msgid ""
 "\n"
 "Section Header%s:\n"
 msgstr ""
 
-#: readelf.c:1828
+#: readelf.c:2589
 msgid ""
 "  [Nr] Name              Type            Addr     Off    Size   ES Flg Lk "
 "Inf Al\n"
 msgstr ""
 
-#: readelf.c:1909
+#: readelf.c:2592
+msgid "  [Nr] Name              Type             Address           Offset\n"
+msgstr ""
+
+#: readelf.c:2593
+msgid "       Size              EntSize          Flags  Link  Info  Align\n"
+msgstr ""
+
+#: readelf.c:2640
+msgid ""
+"Key to Flags: W (write), A (alloc), X (execute), M (merge), S (strings)\n"
+msgstr ""
+
+#: readelf.c:2641
+msgid ""
+"              I (info), L (link order), O (extra OS processing required)\n"
+msgstr ""
+
+#: readelf.c:2642
+msgid "              o (os specific), p (processor specific) x (unknown)\n"
+msgstr ""
+
+#: readelf.c:2700
 #, c-format
 msgid ""
 "\n"
 "Relocation section at offset 0x%lx contains %ld bytes:\n"
 msgstr ""
 
-#: readelf.c:1916
+#: readelf.c:2707
 msgid ""
 "\n"
 "There are no dynamic relocations in this file.\n"
 msgstr ""
 
-#: readelf.c:1943
+#: readelf.c:2735
 msgid ""
 "\n"
 "Relocation section "
 msgstr ""
 
-#: readelf.c:1954
+#: readelf.c:2742
 #, c-format
 msgid " at offset 0x%lx contains %lu entries:\n"
 msgstr ""
 
-#: readelf.c:1982
+#: readelf.c:2770
 msgid ""
 "\n"
 "There are no relocations in this file.\n"
 msgstr ""
 
-#: readelf.c:2070
+#: readelf.c:3020
 msgid ""
 "\n"
 "There is no dynamic segment in this file.\n"
 msgstr ""
 
-#: readelf.c:2128
+#: readelf.c:3054
 msgid "Unable to seek to end of file!"
 msgstr ""
 
-#: readelf.c:2134
+#: readelf.c:3063
 msgid "Unable to determine the number of symbols to load\n"
 msgstr ""
 
-#: readelf.c:2164
+#: readelf.c:3093
 msgid "Unable to seek to end of file\n"
 msgstr ""
 
-#: readelf.c:2170
+#: readelf.c:3099
 msgid "Unable to determine the length of the dynamic string table\n"
 msgstr ""
 
-#: readelf.c:2231
+#: readelf.c:3160
 #, c-format
 msgid ""
 "\n"
-"Dynamic segment at offset 0x%x contains %d entries:\n"
+"Dynamic segment at offset 0x%x contains %ld entries:\n"
 msgstr ""
 
-#: readelf.c:2234
+#: readelf.c:3163
 msgid "  Tag        Type                         Name/Value\n"
 msgstr ""
 
-#: readelf.c:2241
-#, c-format
-msgid "  0x%-8.8lx (%s)%*s"
-msgstr ""
-
-#: readelf.c:2254
+#: readelf.c:3191
 msgid "Auxiliary library"
 msgstr ""
 
-#: readelf.c:2256
+#: readelf.c:3193
 msgid "Filter library"
 msgstr ""
 
-#: readelf.c:2268 readelf.c:2289 readelf.c:2315
+#: readelf.c:3209 readelf.c:3230 readelf.c:3256
 msgid "Flags:"
 msgstr ""
 
-#: readelf.c:2270 readelf.c:2291 readelf.c:2317
+#: readelf.c:3211 readelf.c:3232 readelf.c:3258
 msgid " None\n"
 msgstr ""
 
-#: readelf.c:2420
+#: readelf.c:3361
 #, c-format
 msgid "Shared library: [%s]"
 msgstr ""
 
-#: readelf.c:2425
-msgid " program interpreter\n"
+#: readelf.c:3364
+msgid " program interpreter"
 msgstr ""
 
-#: readelf.c:2429
+#: readelf.c:3368
 #, c-format
-msgid "Library soname: [%s]\n"
+msgid "Library soname: [%s]"
 msgstr ""
 
-#: readelf.c:2433
+#: readelf.c:3372
 #, c-format
-msgid "Library rpath: [%s]\n"
+msgid "Library rpath: [%s]"
 msgstr ""
 
-#: readelf.c:2485
+#: readelf.c:3433
 #, c-format
 msgid "Not needed object: [%s]\n"
 msgstr ""
 
-#: readelf.c:2577
+#: readelf.c:3530
 #, c-format
 msgid ""
 "\n"
 "Version definition section '%s' contains %ld entries:\n"
 msgstr ""
 
-#: readelf.c:2580
+#: readelf.c:3533
 msgid "  Addr: 0x"
 msgstr ""
 
-#: readelf.c:2582 readelf.c:2771
+#: readelf.c:3535 readelf.c:3723
 #, c-format
 msgid "  Offset: %#08lx  Link: %lx (%s)\n"
 msgstr ""
 
-#: readelf.c:2612
+#: readelf.c:3565
 #, c-format
 msgid "  %#06x: Rev: %d  Flags: %s"
 msgstr ""
 
-#: readelf.c:2615
+#: readelf.c:3568
 #, c-format
 msgid "  Index: %d  Cnt: %d  "
 msgstr ""
 
-#: readelf.c:2626
+#: readelf.c:3579
 #, c-format
 msgid "Name: %s\n"
 msgstr ""
 
-#: readelf.c:2628
+#: readelf.c:3581
 #, c-format
 msgid "Name index: %ld\n"
 msgstr ""
 
-#: readelf.c:2643
+#: readelf.c:3596
 #, c-format
 msgid "  %#06x: Parent %d: %s\n"
 msgstr ""
 
-#: readelf.c:2646
+#: readelf.c:3599
 #, c-format
 msgid "  %#06x: Parent %d, name index: %ld\n"
 msgstr ""
 
-#: readelf.c:2665
+#: readelf.c:3618
 #, c-format
 msgid ""
 "\n"
 "Version needs section '%s' contains %ld entries:\n"
 msgstr ""
 
-#: readelf.c:2668
+#: readelf.c:3621
 msgid " Addr: 0x"
 msgstr ""
 
-#: readelf.c:2670
+#: readelf.c:3623
 #, c-format
 msgid "  Offset: %#08lx  Link to section: %ld (%s)\n"
 msgstr ""
 
-#: readelf.c:2696
+#: readelf.c:3649
 #, c-format
 msgid "  %#06x: Version: %d"
 msgstr ""
 
-#: readelf.c:2699
+#: readelf.c:3652
 #, c-format
 msgid "  File: %s"
 msgstr ""
 
-#: readelf.c:2701
+#: readelf.c:3654
 #, c-format
 msgid "  File: %lx"
 msgstr ""
 
-#: readelf.c:2703
+#: readelf.c:3656
 #, c-format
 msgid "  Cnt: %d\n"
 msgstr ""
 
-#: readelf.c:2721
+#: readelf.c:3674
 #, c-format
 msgid "  %#06x: Name: %s"
 msgstr ""
 
-#: readelf.c:2724
+#: readelf.c:3677
 #, c-format
 msgid "  %#06x: Name index: %lx"
 msgstr ""
 
-#: readelf.c:2727
+#: readelf.c:3680
 #, c-format
 msgid "  Flags: %s  Version: %d\n"
 msgstr ""
 
-#: readelf.c:2766
+#: readelf.c:3718
 #, c-format
 msgid ""
 "\n"
 "Version symbols section '%s' contains %d entries:\n"
 msgstr ""
 
-#: readelf.c:2769
+#: readelf.c:3721
 msgid " Addr: "
 msgstr ""
 
-#: readelf.c:2798
+#: readelf.c:3751
 msgid "   0 (*local*)    "
 msgstr ""
 
-#: readelf.c:2802
+#: readelf.c:3755
 msgid "   1 (*global*)   "
 msgstr ""
 
-#: readelf.c:3025
+#: readelf.c:3977
 msgid ""
 "\n"
 "No version information found in this file.\n"
 msgstr ""
 
-#: readelf.c:3038
-msgid "LOCAL"
-msgstr ""
-
-#: readelf.c:3039
-msgid "GLOBAL"
-msgstr ""
-
-#: readelf.c:3040
-msgid "WEAK"
-msgstr ""
-
-#: readelf.c:3043 readelf.c:3067
+#: readelf.c:3995 readelf.c:4030
 #, c-format
 msgid "<processor specific>: %d"
 msgstr ""
 
-#: readelf.c:3045 readelf.c:3069
+#: readelf.c:3997 readelf.c:4042
 #, c-format
 msgid "<OS specific>: %d"
 msgstr ""
 
-#: readelf.c:3047 readelf.c:3071
+#: readelf.c:3999 readelf.c:4045
 #, c-format
 msgid "<unknown>: %d"
 msgstr ""
 
-#: readelf.c:3060
-msgid "NOTYPE"
-msgstr ""
-
-#: readelf.c:3061
-msgid "OBJECT"
-msgstr ""
-
-#: readelf.c:3062
-msgid "FUNC"
-msgstr ""
-
-#: readelf.c:3063
-msgid "SECTION"
-msgstr ""
-
-#: readelf.c:3064
-msgid "FILE"
-msgstr ""
-
-#: readelf.c:3121
+#: readelf.c:4108
 msgid "Unable to read in dynamic data\n"
 msgstr ""
 
-#: readelf.c:3163
+#: readelf.c:4150
 msgid "Unable to seek to start of dynamic information"
 msgstr ""
 
-#: readelf.c:3169
+#: readelf.c:4156
 msgid "Failed to read in number of buckets\n"
 msgstr ""
 
-#: readelf.c:3175
+#: readelf.c:4162
 msgid "Failed to read in number of chains\n"
 msgstr ""
 
-#: readelf.c:3195
+#: readelf.c:4182
 msgid ""
 "\n"
 "Symbol table for image:\n"
 msgstr ""
 
-#: readelf.c:3196
-msgid "  Num Buc:    Value  Size   Type   Bind Ot Ndx Name\n"
+#: readelf.c:4184
+msgid "  Num Buc:    Value  Size   Type   Bind Vis      Ndx Name\n"
 msgstr ""
 
-#: readelf.c:3241
+#: readelf.c:4186
+msgid "  Num Buc:    Value          Size   Type   Bind Vis      Ndx Name\n"
+msgstr ""
+
+#: readelf.c:4230
 #, c-format
 msgid ""
 "\n"
 "Symbol table '%s' contains %lu entries:\n"
 msgstr ""
 
-#: readelf.c:3244
-msgid "  Num:    Value  Size Type    Bind   Ot  Ndx Name\n"
+#: readelf.c:4234
+msgid "   Num:    Value  Size Type    Bind   Vis      Ndx Name\n"
+msgstr ""
+
+#: readelf.c:4236
+msgid "   Num:    Value          Size Type    Bind   Vis      Ndx Name\n"
 msgstr ""
 
-#: readelf.c:3356
+#: readelf.c:4345
 msgid "bad dynamic symbol"
 msgstr ""
 
-#: readelf.c:3415
+#: readelf.c:4404
 msgid ""
 "\n"
 "Dynamic symbol information is not available for displaying symbols.\n"
 msgstr ""
 
-#: readelf.c:3427
+#: readelf.c:4416
 #, c-format
 msgid ""
 "\n"
 "Histogram for bucket list length (total of %d buckets):\n"
 msgstr ""
 
-#: readelf.c:3429
+#: readelf.c:4418
 msgid " Length  Number     %% of total  Coverage\n"
 msgstr ""
 
-#: readelf.c:3434 readelf.c:3453 readelf.c:5336 readelf.c:5526
+#: readelf.c:4423 readelf.c:4442 readelf.c:6695 readelf.c:6888
 msgid "Out of memory"
 msgstr ""
 
-#: readelf.c:3499
+#: readelf.c:4491
 #, c-format
 msgid ""
 "\n"
 "Dynamic info segment at offset 0x%lx contains %d entries:\n"
 msgstr ""
 
-#: readelf.c:3502
+#: readelf.c:4494
 msgid " Num: Name                           BoundTo     Flags\n"
 msgstr ""
 
-#: readelf.c:3550
+#: readelf.c:4542
 #, c-format
 msgid ""
 "\n"
 "Assembly dump of section %s\n"
 msgstr ""
 
-#: readelf.c:3573
+#: readelf.c:4565
 #, c-format
 msgid ""
 "\n"
 "Section '%s' has no data to dump.\n"
 msgstr ""
 
-#: readelf.c:3578
+#: readelf.c:4570
 #, c-format
 msgid ""
 "\n"
 "Hex dump of section '%s':\n"
 msgstr ""
 
-#: readelf.c:3728
+#: readelf.c:4722
 msgid "badly formed extended line op encountered!"
 msgstr ""
 
-#: readelf.c:3735
+#: readelf.c:4729
 #, c-format
 msgid "  Extended opcode %d: "
 msgstr ""
 
-#: readelf.c:3740
+#: readelf.c:4734
 msgid ""
 "End of Sequence\n"
 "\n"
 msgstr ""
 
-#: readelf.c:3747
+#: readelf.c:4740
 #, c-format
 msgid "set Address to 0x%lx\n"
 msgstr ""
 
-#: readelf.c:3752
+#: readelf.c:4745
 msgid "  define new File Table entry\n"
 msgstr ""
 
-#: readelf.c:3753 readelf.c:3871
+#: readelf.c:4746 readelf.c:4868
 msgid "  Entry\tDir\tTime\tSize\tName\n"
 msgstr ""
 
-#: readelf.c:3755
+#: readelf.c:4748
 #, c-format
 msgid "   %d\t"
 msgstr ""
 
-#: readelf.c:3758 readelf.c:3760 readelf.c:3762 readelf.c:3883 readelf.c:3885
-#: readelf.c:3887
+#: readelf.c:4751 readelf.c:4753 readelf.c:4755 readelf.c:4880 readelf.c:4882
+#: readelf.c:4884
 #, c-format
 msgid "%lu\t"
 msgstr ""
 
-#: readelf.c:3763
+#: readelf.c:4756
 #, c-format
 msgid ""
 "%s\n"
 "\n"
 msgstr ""
 
-#: readelf.c:3767
+#: readelf.c:4760
 #, c-format
 msgid "UNKNOWN: length %d\n"
 msgstr ""
 
-#: readelf.c:3789
+#: readelf.c:4786
 #, c-format
 msgid ""
 "\n"
@@ -2456,439 +2612,511 @@ msgid ""
 "\n"
 msgstr ""
 
-#: readelf.c:3801
+#: readelf.c:4798
 msgid "The line info appears to be corrupt - the section is too small\n"
 msgstr ""
 
-#: readelf.c:3809
+#: readelf.c:4806
 msgid "Only DWARF version 2 line info is currently supported.\n"
 msgstr ""
 
-#: readelf.c:3824
+#: readelf.c:4821
 #, c-format
 msgid "  Length:                      %ld\n"
 msgstr ""
 
-#: readelf.c:3825
+#: readelf.c:4822
 #, c-format
 msgid "  DWARF Version:               %d\n"
 msgstr ""
 
-#: readelf.c:3826
+#: readelf.c:4823
 #, c-format
 msgid "  Prolgue Length:              %d\n"
 msgstr ""
 
-#: readelf.c:3827
+#: readelf.c:4824
 #, c-format
 msgid "  Minimum Instruction Length:  %d\n"
 msgstr ""
 
-#: readelf.c:3828
+#: readelf.c:4825
 #, c-format
 msgid "  Initial value of 'is_stmt':  %d\n"
 msgstr ""
 
-#: readelf.c:3829
+#: readelf.c:4826
 #, c-format
 msgid "  Line Base:                   %d\n"
 msgstr ""
 
-#: readelf.c:3830
+#: readelf.c:4827
 #, c-format
 msgid "  Line Range:                  %d\n"
 msgstr ""
 
-#: readelf.c:3831
+#: readelf.c:4828
 #, c-format
 msgid "  Opcode Base:                 %d\n"
 msgstr ""
 
-#: readelf.c:3840
+#: readelf.c:4837
 msgid ""
 "\n"
 " Opcodes:\n"
 msgstr ""
 
-#: readelf.c:3843
+#: readelf.c:4840
 #, c-format
 msgid "  Opcode %d has %d args\n"
 msgstr ""
 
-#: readelf.c:3849
+#: readelf.c:4846
 msgid ""
 "\n"
 " The Directory Table is empty.\n"
 msgstr ""
 
-#: readelf.c:3852
+#: readelf.c:4849
 msgid ""
 "\n"
 " The Directory Table:\n"
 msgstr ""
 
-#: readelf.c:3856
+#: readelf.c:4853
 #, c-format
 msgid "  %s\n"
 msgstr ""
 
-#: readelf.c:3867
+#: readelf.c:4864
 msgid ""
 "\n"
 " The File Name Table is empty.\n"
 msgstr ""
 
-#: readelf.c:3870
+#: readelf.c:4867
 msgid ""
 "\n"
 " The File Name Table:\n"
 msgstr ""
 
-#: readelf.c:3878
+#: readelf.c:4875
 #, c-format
 msgid "  %d\t"
 msgstr ""
 
-#: readelf.c:3889
+#: readelf.c:4886
 #, c-format
 msgid "%s\n"
 msgstr ""
 
 #. Now display the statements.
-#: readelf.c:3897
+#: readelf.c:4894
 msgid ""
 "\n"
 " Line Number Statements:\n"
 msgstr ""
 
-#: readelf.c:3915
+#: readelf.c:4913
 msgid "  Copy\n"
 msgstr ""
 
-#: readelf.c:3922
+#: readelf.c:4920
 #, c-format
 msgid "  Advance PC by %d to %lx\n"
 msgstr ""
 
-#: readelf.c:3930
+#: readelf.c:4928
 #, c-format
 msgid "  Advance Line by %d to %d\n"
 msgstr ""
 
-#: readelf.c:3937
+#: readelf.c:4935
 #, c-format
 msgid "  Set File Name to entry %d in the File Name Table\n"
 msgstr ""
 
-#: readelf.c:3945
+#: readelf.c:4943
 #, c-format
 msgid "  Set column to %d\n"
 msgstr ""
 
-#: readelf.c:3952
+#: readelf.c:4950
 #, c-format
 msgid "  Set is_stmt to %d\n"
 msgstr ""
 
-#: readelf.c:3957
+#: readelf.c:4955
 msgid "  Set basic block\n"
 msgstr ""
 
-#: readelf.c:3964
+#: readelf.c:4963
 #, c-format
 msgid "  Advance PC by constant %d to 0x%lx\n"
 msgstr ""
 
-#: readelf.c:3972
+#: readelf.c:4971
 #, c-format
 msgid "  Advance PC by fixed size amount %d to 0x%lx\n"
 msgstr ""
 
-#: readelf.c:3980
+#: readelf.c:4979
 #, c-format
 msgid "  Special opcode %d: advance Address by %d to 0x%lx"
 msgstr ""
 
-#: readelf.c:3984
+#: readelf.c:4983
 #, c-format
 msgid " and Line by %d to %d\n"
 msgstr ""
 
-#: readelf.c:4007 readelf.c:4426
+#: readelf.c:5006 readelf.c:5428
 #, c-format
 msgid ""
 "Contents of the %s section:\n"
 "\n"
 msgstr ""
 
-#: readelf.c:4026
+#: readelf.c:5025
 msgid "Only DWARF 2 pubnames are currently supported"
 msgstr ""
 
-#: readelf.c:4030
+#: readelf.c:5029
 #, c-format
 msgid "  Length:                              %ld\n"
 msgstr ""
 
-#: readelf.c:4032
+#: readelf.c:5031
 #, c-format
 msgid "  Version:                             %d\n"
 msgstr ""
 
-#: readelf.c:4034
+#: readelf.c:5033
 #, c-format
 msgid "  Offset into .debug_info section:     %ld\n"
 msgstr ""
 
-#: readelf.c:4036
+#: readelf.c:5035
 #, c-format
 msgid "  Size of area in .debug_info section: %ld\n"
 msgstr ""
 
-#: readelf.c:4039
+#: readelf.c:5038
 msgid ""
 "\n"
 "    Offset\tName\n"
 msgstr ""
 
-#: readelf.c:4121
+#: readelf.c:5120
 #, c-format
 msgid "Unknown TAG value: %lx"
 msgstr ""
 
-#: readelf.c:4216
+#: readelf.c:5215
 #, c-format
 msgid "Unknown AT value: %lx"
 msgstr ""
 
-#: readelf.c:4253
+#: readelf.c:5252
 #, c-format
 msgid "Unknown FORM value: %lx"
 msgstr ""
 
-#: readelf.c:4432
+#: readelf.c:5434
 msgid "  Number TAG\n"
 msgstr ""
 
-#: readelf.c:4438
+#: readelf.c:5440
 #, c-format
 msgid "   %ld      %s    [%s]\n"
 msgstr ""
 
-#: readelf.c:4441
+#: readelf.c:5443
 msgid "has children"
 msgstr ""
 
-#: readelf.c:4441
+#: readelf.c:5443
 msgid "no children"
 msgstr ""
 
-#: readelf.c:4445
+#: readelf.c:5447
 #, c-format
 msgid "    %-18s %s\n"
 msgstr ""
 
-#: readelf.c:4464
+#: readelf.c:5466
 #, c-format
 msgid " %lu byte block: "
 msgstr ""
 
-#: readelf.c:4633
+#: readelf.c:5930
 msgid "(User defined location op)"
 msgstr ""
 
-#: readelf.c:4635
+#: readelf.c:5932
 msgid "(Unknown location op)"
 msgstr ""
 
-#: readelf.c:4752
+#: readelf.c:6049
 #, c-format
 msgid "Unable to handle FORM: %d"
 msgstr ""
 
-#: readelf.c:4756
+#: readelf.c:6053
 #, c-format
 msgid "Unrecognised form: %d"
 msgstr ""
 
-#: readelf.c:4769
+#: readelf.c:6066
 msgid "(not inlined)"
 msgstr ""
 
-#: readelf.c:4770
+#: readelf.c:6067
 msgid "(inlined)"
 msgstr ""
 
-#: readelf.c:4771
+#: readelf.c:6068
 msgid "(declared as inline but ignored)"
 msgstr ""
 
-#: readelf.c:4772
+#: readelf.c:6069
 msgid "(declared as inline and inlined)"
 msgstr ""
 
-#: readelf.c:4773
+#: readelf.c:6070
 #, c-format
 msgid "  (Unknown inline attribute value: %lx)"
 msgstr ""
 
-#: readelf.c:4903 readelf.c:5027
+#: readelf.c:6200 readelf.c:6324
 #, c-format
 msgid ""
 "The section %s contains:\n"
 "\n"
 msgstr ""
 
-#: readelf.c:4925
+#: readelf.c:6222
 msgid "Only version 2 DWARF debug information is currently supported.\n"
 msgstr ""
 
-#: readelf.c:4929
+#: readelf.c:6226
 msgid "  Compilation Unit:\n"
 msgstr ""
 
-#: readelf.c:4930
+#: readelf.c:6227
 #, c-format
 msgid "   Length:        %ld\n"
 msgstr ""
 
-#: readelf.c:4931
+#: readelf.c:6228
 #, c-format
 msgid "   Version:       %d\n"
 msgstr ""
 
-#: readelf.c:4932
+#: readelf.c:6229
 #, c-format
 msgid "   Abbrev Offset: %ld\n"
 msgstr ""
 
-#: readelf.c:4933
+#: readelf.c:6230
 #, c-format
 msgid "   Pointer Size:  %d\n"
 msgstr ""
 
-#: readelf.c:4953
+#: readelf.c:6250
 msgid "Unable to locate .debug_abbrev section!\n"
 msgstr ""
 
-#: readelf.c:4993
+#: readelf.c:6290
 #, c-format
-msgid "Unable to locate entry %d in the abbreviation table\n"
+msgid "Unable to locate entry %lu in the abbreviation table\n"
 msgstr ""
 
-#: readelf.c:4998
+#: readelf.c:6295
 #, c-format
-msgid " <%d><%x>: Abbrev Number: %d (%s)\n"
+msgid " <%d><%x>: Abbrev Number: %lu (%s)\n"
 msgstr ""
 
-#: readelf.c:5045
+#: readelf.c:6343
 #, c-format
 msgid "  Length:                   %ld\n"
 msgstr ""
 
-#: readelf.c:5046
+#: readelf.c:6344
 #, c-format
 msgid "  Version:                  %d\n"
 msgstr ""
 
-#: readelf.c:5047
+#: readelf.c:6345
 #, c-format
 msgid "  Offset into .debug_info:  %lx\n"
 msgstr ""
 
-#: readelf.c:5048
+#: readelf.c:6346
 #, c-format
 msgid "  Pointer Size:             %d\n"
 msgstr ""
 
-#: readelf.c:5049
+#: readelf.c:6347
 #, c-format
 msgid "  Segment Size:             %d\n"
 msgstr ""
 
-#: readelf.c:5051
+#: readelf.c:6349
 msgid ""
 "\n"
 "    Address  Length\n"
 msgstr ""
 
-#: readelf.c:5086
+#: readelf.c:6390
 #, c-format
 msgid "Displaying the debug contents of section %s is not yet supported.\n"
 msgstr ""
 
-#: readelf.c:5128
+#: readelf.c:6452
 #, c-format
 msgid ""
 "\n"
 "Section '%s' has no debugging data.\n"
 msgstr ""
 
-#: readelf.c:5144
+#: readelf.c:6468
 #, c-format
 msgid "Unrecognised debug section: %s\n"
 msgstr ""
 
-#: readelf.c:5183
+#: readelf.c:6540
 msgid "Some sections were not dumped because they do not exist!\n"
 msgstr ""
 
-#: readelf.c:5358
+#: readelf.c:6719
 #, c-format
 msgid ""
 "\n"
 "Section '%s' contains %d entries:\n"
 msgstr ""
 
-#: readelf.c:5519
+#: readelf.c:6881
 msgid "conflict list with without table"
 msgstr ""
 
-#: readelf.c:5547
+#: readelf.c:6909
 #, c-format
 msgid ""
 "\n"
 "Section '.conflict' contains %d entries:\n"
 msgstr ""
 
-#: readelf.c:5548
+#: readelf.c:6910
 msgid "  Num:    Index       Value  Name"
 msgstr ""
 
-#: readelf.c:5625
+#: readelf.c:6935
+msgid "NT_PRSTATUS (prstatus structure)"
+msgstr ""
+
+#: readelf.c:6936
+msgid "NT_FPREGSET (floating point registers)"
+msgstr ""
+
+#: readelf.c:6937
+msgid "NT_PRPSINFO (prpsinfo structure)"
+msgstr ""
+
+#: readelf.c:6938
+msgid "NT_TASKSTRUCT (task structure)"
+msgstr ""
+
+#: readelf.c:6939
+msgid "NT_PRXFPREG (user_xfpregs structure)"
+msgstr ""
+
+#: readelf.c:6940
+msgid "NT_PSTATUS (pstatus structure)"
+msgstr ""
+
+#: readelf.c:6941
+msgid "NT_FPREGS (floating point registers)"
+msgstr ""
+
+#: readelf.c:6942
+msgid "NT_PSINFO (psinfo structure)"
+msgstr ""
+
+#: readelf.c:6943
+msgid "NT_LWPSTATUS (lwpstatus_t structure)"
+msgstr ""
+
+#: readelf.c:6944
+msgid "NT_LWPSINFO (lwpsinfo_t structure)"
+msgstr ""
+
+#: readelf.c:6945
+msgid "NT_WIN32PSTATUS (win32_pstatus strcuture)"
+msgstr ""
+
+#: readelf.c:6947
+#, c-format
+msgid "Unknown note type: (0x%08x)"
+msgstr ""
+
+#: readelf.c:6985
+#, c-format
+msgid ""
+"\n"
+"Notes at offset 0x%08lx with length 0x%08lx:\n"
+msgstr ""
+
+#: readelf.c:6988
+msgid "  Owner\t\tData size\tDescription\n"
+msgstr ""
+
+#: readelf.c:7099
+msgid "No note segments present in the core file.\n"
+msgstr ""
+
+#: readelf.c:7177
+msgid "This instance of readelf has been built without support for a\n"
+msgstr ""
+
+#: readelf.c:7178
+msgid "64 bit data type and so it cannot read 64 bit ELF files.\n"
+msgstr ""
+
+#: readelf.c:7213
 #, c-format
 msgid "Cannot stat input file %s.\n"
 msgstr ""
 
-#: readelf.c:5632
+#: readelf.c:7220
 #, c-format
 msgid "Input file %s not found.\n"
 msgstr ""
 
-#: readelf.c:5638
+#: readelf.c:7226
 #, c-format
 msgid "%s: Failed to read file header\n"
 msgstr ""
 
-#: readelf.c:5652
+#: readelf.c:7240
 #, c-format
 msgid ""
 "\n"
 "File: %s\n"
 msgstr ""
 
-#: rename.c:121
+#: rename.c:131
 #, c-format
 msgid "%s: cannot set time: %s"
 msgstr ""
 
 #. We have to clean up here.
-#: rename.c:160 rename.c:193
+#: rename.c:170 rename.c:203
 #, c-format
 msgid "%s: rename: %s"
 msgstr ""
 
-#: rename.c:201
+#: rename.c:211
 #, c-format
 msgid "%s: simple_copy: %s"
 msgstr ""
@@ -3163,51 +3391,95 @@ msgstr ""
 msgid "filename required for COFF output"
 msgstr ""
 
-#: rescoff.c:734
+#: rescoff.c:740
 msgid "can't get BFD_RELOC_RVA relocation type"
 msgstr ""
 
-#: resrc.c:253
+#: resrc.c:240 resrc.c:312
+#, c-format
+msgid "can't open temporary file `%s': %s"
+msgstr ""
+
+#: resrc.c:246
+#, c-format
+msgid "can't redirect stdout: `%s': %s"
+msgstr ""
+
+#: resrc.c:262
+#, c-format
+msgid "%s %s: %s"
+msgstr ""
+
+#: resrc.c:283
+#, c-format
+msgid "%s exited with status %d"
+msgstr ""
+
+#: resrc.c:308
+#, c-format
+msgid "can't execute `%s': %s"
+msgstr ""
+
+#: resrc.c:317
+#, c-format
+msgid "Using temporary file `%s' to read preprocessor output\n"
+msgstr ""
+
+#: resrc.c:324
 #, c-format
 msgid "can't popen `%s': %s"
 msgstr ""
 
-#: resrc.c:266
+#: resrc.c:326
+msgid "Using popen to read preprocessor output\n"
+msgstr ""
+
+#: resrc.c:369
+#, c-format
+msgid "Tried `%s'\n"
+msgstr ""
+
+#: resrc.c:380
+#, c-format
+msgid "Using `%s'\n"
+msgstr ""
+
+#: resrc.c:544
 #, c-format
-msgid "%s: warning: preprocessor failed\n"
+msgid "%s:%d: %s\n"
 msgstr ""
 
-#: resrc.c:311
+#: resrc.c:553
 #, c-format
 msgid "%s: unexpected EOF"
 msgstr ""
 
-#: resrc.c:368
+#: resrc.c:610
 #, c-format
 msgid "%s: read of %lu returned %lu"
 msgstr ""
 
-#: resrc.c:410 resrc.c:641 resrc.c:914 resrc.c:1068
+#: resrc.c:652 resrc.c:883 resrc.c:1156 resrc.c:1310
 #, c-format
 msgid "stat failed on bitmap file `%s': %s"
 msgstr ""
 
-#: resrc.c:463
+#: resrc.c:705
 #, c-format
 msgid "cursor file `%s' does not contain cursor data"
 msgstr ""
 
-#: resrc.c:495 resrc.c:785
+#: resrc.c:737 resrc.c:1027
 #, c-format
 msgid "%s: fseek to %lu failed: %s"
 msgstr ""
 
-#: resrc.c:754
+#: resrc.c:996
 #, c-format
 msgid "icon file `%s' does not contain icon data"
 msgstr ""
 
-#: resrc.c:1273
+#: resrc.c:1515
 #, c-format
 msgid "can't open `%s' for output: %s"
 msgstr ""
@@ -3252,7 +3524,7 @@ msgstr ""
 msgid "%s: unable to open output file %s\n"
 msgstr ""
 
-#: stabs.c:349 stabs.c:1762
+#: stabs.c:349 stabs.c:1769
 msgid "numeric overflow"
 msgstr ""
 
@@ -3286,64 +3558,64 @@ msgstr ""
 
 #. Does this actually ever happen?  Is that why we are worrying
 #. about dealing with it rather than just calling error_type?
-#: stabs.c:1854
+#: stabs.c:1861
 msgid "missing index type"
 msgstr ""
 
-#: stabs.c:2181
+#: stabs.c:2188
 msgid "unknown virtual character for baseclass"
 msgstr ""
 
-#: stabs.c:2199
+#: stabs.c:2206
 msgid "unknown visibility character for baseclass"
 msgstr ""
 
-#: stabs.c:2391
+#: stabs.c:2398
 msgid "unnamed $vb type"
 msgstr ""
 
-#: stabs.c:2397
+#: stabs.c:2404
 msgid "unrecognized C++ abbreviation"
 msgstr ""
 
-#: stabs.c:2477
+#: stabs.c:2484
 msgid "unknown visibility character for field"
 msgstr ""
 
-#: stabs.c:2733
+#: stabs.c:2740
 msgid "const/volatile indicator missing"
 msgstr ""
 
-#: stabs.c:2973
+#: stabs.c:2980
 #, c-format
 msgid "No mangling for \"%s\"\n"
 msgstr ""
 
-#: stabs.c:3286
+#: stabs.c:3293
 msgid "Undefined N_EXCL"
 msgstr ""
 
-#: stabs.c:3374
+#: stabs.c:3381
 #, c-format
 msgid "Type file number %d out of range\n"
 msgstr ""
 
-#: stabs.c:3379
+#: stabs.c:3386
 #, c-format
 msgid "Type index number %d out of range\n"
 msgstr ""
 
-#: stabs.c:3466
+#: stabs.c:3473
 #, c-format
 msgid "Unrecognized XCOFF type %d\n"
 msgstr ""
 
-#: stabs.c:3765
+#: stabs.c:3772
 #, c-format
 msgid "bad mangled name `%s'\n"
 msgstr ""
 
-#: stabs.c:3861
+#: stabs.c:3868
 msgid "no argument types in mangled string\n"
 msgstr ""
 
@@ -3385,50 +3657,50 @@ msgid ""
 "the GNU General Public License.  This program has absolutely no warranty.\n"
 msgstr ""
 
-#: windres.c:233
+#: windres.c:237
 #, c-format
 msgid "can't open %s `%s': %s"
 msgstr ""
 
-#: windres.c:412
+#: windres.c:416
 msgid ": expected to be a directory\n"
 msgstr ""
 
-#: windres.c:424
+#: windres.c:428
 msgid ": expected to be a leaf\n"
 msgstr ""
 
-#: windres.c:433
+#: windres.c:437
 #, c-format
 msgid "%s: warning: "
 msgstr ""
 
-#: windres.c:435
+#: windres.c:439
 msgid ": duplicate value\n"
 msgstr ""
 
-#: windres.c:598
+#: windres.c:602
 #, c-format
 msgid "%s: unknown format type `%s'\n"
 msgstr ""
 
-#: windres.c:599
+#: windres.c:603
 #, c-format
 msgid "%s: supported formats:"
 msgstr ""
 
 #. Otherwise, we give up.
-#: windres.c:686
+#: windres.c:690
 #, c-format
 msgid "can not determine type of file `%s'; use the -I option"
 msgstr ""
 
-#: windres.c:700
+#: windres.c:704
 #, c-format
 msgid "Usage: %s [options] [input-file] [output-file]\n"
 msgstr ""
 
-#: windres.c:702
+#: windres.c:706
 msgid ""
 "Options:\n"
 "  -i FILE, --input FILE       Name input file\n"
@@ -3443,27 +3715,30 @@ msgid ""
 "  -DSYM[=VAL], --define SYM[=VAL]\n"
 "                              Define SYM when preprocessing rc file\n"
 "  -v                          Verbose - tells you what it's doing\n"
-"\n"
+"  --language VAL              Set language when reading rc file\n"
+"  --use-temp-file             Use a temporary file instead of popen to read\n"
+"                              the preprocessor output\n"
+"  --no-use-temp-file          Use popen (default)\n"
 msgstr ""
 
-#: windres.c:718
+#: windres.c:725
 msgid "  --yydebug                   Turn on parser debugging\n"
 msgstr ""
 
-#: windres.c:721
+#: windres.c:728
 msgid ""
 "  --help                      Print this help message\n"
 "  --version                   Print version information\n"
 msgstr ""
 
-#: windres.c:724
+#: windres.c:731
 msgid ""
 "FORMAT is one of rc, res, or coff, and is deduced from the file name\n"
 "extension if not specified.  A single file name is an input file.\n"
 "No input-file is stdin, default rc.  No output-file is stdout, default rc.\n"
 msgstr ""
 
-#: windres.c:963
+#: windres.c:980
 msgid "no resources"
 msgstr ""
 
diff --git a/gas/Makefile.in b/gas/Makefile.in
index 0bd7733..07b2eee 100644
--- a/gas/Makefile.in
+++ b/gas/Makefile.in
@@ -1,6 +1,6 @@
 # Makefile.in generated automatically by automake 1.4 from Makefile.am
 
-# Copyright (C) 1994-99, 2000 Free Software Foundation, Inc.
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -81,14 +81,13 @@ INCLUDE_LOCALE_H = @INCLUDE_LOCALE_H@
 INSTOBJEXT = @INSTOBJEXT@
 INTLDEPS = @INTLDEPS@
 INTLOBJS = @INTLOBJS@
-LD = @LD@
 LIBTOOL = @LIBTOOL@
 LN_S = @LN_S@
 MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
 MKINSTALLDIRS = @MKINSTALLDIRS@
 MSGFMT = @MSGFMT@
-NM = @NM@
+OBJDUMP = @OBJDUMP@
 OPCODES_LIB = @OPCODES_LIB@
 PACKAGE = @PACKAGE@
 POFILES = @POFILES@
@@ -96,7 +95,6 @@ POSUB = @POSUB@
 RANLIB = @RANLIB@
 USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
 USE_NLS = @USE_NLS@
-USE_SYMBOL_UNDERSCORE = @USE_SYMBOL_UNDERSCORE@
 VERSION = @VERSION@
 atof = @atof@
 cgen_cpu_prefix = @cgen_cpu_prefix@
diff --git a/gas/aclocal.m4 b/gas/aclocal.m4
index ebbe468..4b4ca84 100644
--- a/gas/aclocal.m4
+++ b/gas/aclocal.m4
@@ -160,7 +160,7 @@ fi
 AC_SUBST($1)])
 
 
-# serial 35 AC_PROG_LIBTOOL
+# serial 40 AC_PROG_LIBTOOL
 AC_DEFUN(AC_PROG_LIBTOOL,
 [AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
 
@@ -169,10 +169,11 @@ AC_CACHE_SAVE
 
 # Actually configure libtool.  ac_aux_dir is where install-sh is found.
 CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
-DLLTOOL="$DLLTOOL" AS="$AS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
 ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
 || AC_MSG_ERROR([libtool configure failed])
 
 # Reload cache, that may have been modified by ltconfig
@@ -201,24 +202,33 @@ AC_REQUIRE([AC_PROG_RANLIB])dnl
 AC_REQUIRE([AC_PROG_CC])dnl
 AC_REQUIRE([AC_PROG_LD])dnl
 AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_SYS_NM_PARSE])dnl
-AC_REQUIRE([AC_SYS_SYMBOL_UNDERSCORE])dnl
 AC_REQUIRE([AC_PROG_LN_S])dnl
 dnl
 
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
+
 # Check for any special flags to pass to ltconfig.
 libtool_flags="--cache-file=$cache_file"
 test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
 test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
 test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
 test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
 test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
+[libtool_flags="$libtool_flags --enable-dlopen"])
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[libtool_flags="$libtool_flags --enable-win32-dll"])
+AC_ARG_ENABLE(libtool-lock,
+  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
 
 # Some flags need to be propagated to the compiler or linker for good
 # libtool support.
-case "$host" in
+case "$lt_target" in
 *-*-irix6*)
   # Find out which ABI we are using.
   echo '[#]line __oline__ "configure"' > conftest.$ac_ext
@@ -250,33 +260,28 @@ case "$host" in
   fi
   ;;
 
-*-*-cygwin*)
-  AC_SYS_LIBTOOL_CYGWIN
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw*)
+  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+  AC_CHECK_TOOL(AS, as, false)
+  AC_CHECK_TOOL(OBJDUMP, objdump, false)
   ;;
-
+])
 esac
-
-# enable the --disable-libtool-lock switch
-
-AC_ARG_ENABLE(libtool-lock,
-[  --disable-libtool-lock  force libtool not to do file locking],
-need_locks=$enableval,
-need_locks=yes)
-
-if test x"$need_locks" = xno; then
-  libtool_flags="$libtool_flags --disable-lock"
-fi
 ])
 
-# AC_LIBTOOL_DLOPEN - check for dlopen support
-AC_DEFUN(AC_LIBTOOL_DLOPEN, [lt_dlopen=yes])
+# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
+AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
+
+# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
+AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
 
 # AC_ENABLE_SHARED - implement the --enable-shared flag
 # Usage: AC_ENABLE_SHARED[(DEFAULT)]
 #   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
 #   `yes'.
-AC_DEFUN(AC_ENABLE_SHARED,
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_SHARED, [dnl
+define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
 AC_ARG_ENABLE(shared,
 changequote(<<, >>)dnl
 <<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
@@ -301,15 +306,15 @@ enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
 ])
 
 # AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN(AC_DISABLE_SHARED,
-[AC_ENABLE_SHARED(no)])
+AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)])
 
 # AC_ENABLE_STATIC - implement the --enable-static flag
 # Usage: AC_ENABLE_STATIC[(DEFAULT)]
 #   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
 #   `yes'.
-AC_DEFUN(AC_ENABLE_STATIC,
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_STATIC, [dnl
+define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
 AC_ARG_ENABLE(static,
 changequote(<<, >>)dnl
 <<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
@@ -334,16 +339,16 @@ enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
 ])
 
 # AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN(AC_DISABLE_STATIC,
-[AC_ENABLE_STATIC(no)])
+AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)])
 
 
 # AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
 # Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
 #   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
 #   `yes'.
-AC_DEFUN(AC_ENABLE_FAST_INSTALL,
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
+define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
 AC_ARG_ENABLE(fast-install,
 changequote(<<, >>)dnl
 <<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
@@ -368,9 +373,8 @@ enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
 ])
 
 # AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN(AC_DISABLE_FAST_INSTALL,
-[AC_ENABLE_FAST_INSTALL(no)])
-
+AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)])
 
 # AC_PROG_LD - find the path to the GNU or non-GNU linker
 AC_DEFUN(AC_PROG_LD,
@@ -388,7 +392,7 @@ if test "$ac_cv_prog_gcc" = yes; then
   case "$ac_prog" in
     # Accept absolute paths.
 changequote(,)dnl
-    /* | [A-Za-z]:[\\/]*)
+    [\\/]* | [A-Za-z]:[\\/]*)
       re_direlt='/[^/][^/]*/\.\./'
 changequote([,])dnl
       # Canonicalize the path of ld
@@ -414,10 +418,10 @@ else
 fi
 AC_CACHE_VAL(ac_cv_path_LD,
 [if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
   for ac_dir in $PATH; do
     test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog"; then
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
       ac_cv_path_LD="$ac_dir/$ac_prog"
       # Check to see if the program is GNU ld.  I'd rather use --version,
       # but apparently some GNU ld's only accept -v.
@@ -440,7 +444,6 @@ else
   AC_MSG_RESULT(no)
 fi
 test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_SUBST(LD)
 AC_PROG_LD_GNU
 ])
 
@@ -462,10 +465,10 @@ AC_CACHE_VAL(ac_cv_path_NM,
   # Let the user override the test.
   ac_cv_path_NM="$NM"
 else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
   for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
     test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/nm; then
+    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
       # Check to see if the nm accepts a BSD-compat flag.
       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
       #   nm: unknown option "B" ignored
@@ -486,230 +489,24 @@ else
 fi])
 NM="$ac_cv_path_NM"
 AC_MSG_RESULT([$NM])
-AC_SUBST(NM)
 ])
 
-# AC_SYS_NM_PARSE - Check for command to grab the raw symbol name followed
-# by C symbol name from nm.
-AC_DEFUN(AC_SYS_NM_PARSE,
+# AC_CHECK_LIBM - check for math library
+AC_DEFUN(AC_CHECK_LIBM,
 [AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output])
-AC_CACHE_VAL(ac_cv_sys_global_symbol_pipe,
-[# These are sane defaults that work on at least a few old systems.
-# {They come from Ultrix.  What could be older than Ultrix?!! ;)}
-
-changequote(,)dnl
-# Character class describing NM global symbol codes.
-ac_symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-ac_symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-# Define system-specific variables.
-case "$host_os" in
-aix*)
-  ac_symcode='[BCDT]'
-  ;;
-cygwin* | mingw*)
-  ac_symcode='[ABCDGISTW]'
-  ;;
-hpux*)
-  ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
+LIBM=
+case "$lt_target" in
+*-*-beos* | *-*-cygwin*)
+  # These system don't have libm
   ;;
-irix*)
-  ac_symcode='[BCDEGRST]'
+*-ncr-sysv4.3*)
+  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
   ;;
-solaris*)
-  ac_symcode='[BDT]'
+*)
+  AC_CHECK_LIB(m, main, LIBM="-lm")
   ;;
 esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
-  ac_symcode='[ABCDGISTW]'
-fi
-changequote([,])dnl
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
-  ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ 	]\($ac_symcode\)[ 	][ 	]*\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'"
-
-  # Check to see that the pipe works correctly.
-  ac_pipe_works=no
-  rm -f conftest.$ac_ext
-  cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func;return 0;}
-EOF
-
-  if AC_TRY_EVAL(ac_compile); then
-    # Now try to grab the symbols.
-    ac_nlist=conftest.nm
-  
-    if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
-
-      # Try sorting and uniquifying the output.
-      if sort "$ac_nlist" | uniq > "$ac_nlist"T; then
-	mv -f "$ac_nlist"T "$ac_nlist"
-      else
-	rm -f "$ac_nlist"T
-      fi
-
-      # Make sure that we snagged all the symbols we need.
-      if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then
-	if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then
-	  cat <<EOF > conftest.c
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
-	  # Now generate the symbol file.
-	  eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c'
-
-	  cat <<EOF >> conftest.c
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
-  const char *name;
-  lt_ptr_t address;
-}
-changequote(,)dnl
-lt_preloaded_symbols[] =
-changequote([,])dnl
-{
-EOF
-	sed 's/^. \(.*\) \(.*\)$/  {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c
-	cat <<\EOF >> conftest.c
-  {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
-	  # Now try linking the two files.
-	  mv conftest.$ac_objext conftestm.$ac_objext
-	  ac_save_LIBS="$LIBS"
-	  ac_save_CFLAGS="$CFLAGS"
-	  LIBS="conftestm.$ac_objext"
-	  CFLAGS="$CFLAGS$no_builtin_flag"
-	  if AC_TRY_EVAL(ac_link) && test -s conftest; then
-	    ac_pipe_works=yes
-	  else
-	    echo "configure: failed program was:" >&AC_FD_CC
-	    cat conftest.c >&AC_FD_CC
-	  fi
-	  LIBS="$ac_save_LIBS"
-	  CFLAGS="$ac_save_CFLAGS"
-	else
-	  echo "cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
-	fi
-      else
-	echo "cannot find nm_test_var in $ac_nlist" >&AC_FD_CC
-      fi
-    else
-      echo "cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
-    fi
-  else
-    echo "$progname: failed program was:" >&AC_FD_CC
-    cat conftest.c >&AC_FD_CC
-  fi
-  rm -rf conftest*
-
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$ac_pipe_works" = yes; then
-    if test x"$ac_symprfx" = x"_"; then
-      ac_cv_sys_symbol_underscore=yes
-    else
-      ac_cv_sys_symbol_underscore=no
-    fi
-    break
-  else
-    ac_cv_sys_global_symbol_pipe=
-  fi
-done
-])
-
-ac_result=yes
-if test -z "$ac_cv_sys_global_symbol_pipe"; then
-   ac_result=no
-fi
-AC_MSG_RESULT($ac_result)
-])
-
-# AC_SYS_LIBTOOL_CYGWIN - find tools needed on cygwin
-AC_DEFUN(AC_SYS_LIBTOOL_CYGWIN,
-[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-AC_CHECK_TOOL(AS, as, false)
-])
-
-# AC_SYS_SYMBOL_UNDERSCORE - does the compiler prefix global symbols
-#                            with an underscore?
-AC_DEFUN(AC_SYS_SYMBOL_UNDERSCORE,
-[AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_SYS_NM_PARSE])dnl
-AC_MSG_CHECKING([for _ prefix in compiled symbols])
-AC_CACHE_VAL(ac_cv_sys_symbol_underscore,
-[ac_cv_sys_symbol_underscore=no
-cat > conftest.$ac_ext <<EOF
-void nm_test_func(){}
-int main(){nm_test_func;return 0;}
-EOF
-if AC_TRY_EVAL(ac_compile); then
-  # Now try to grab the symbols.
-  ac_nlist=conftest.nm
-  if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
-    # See whether the symbols have a leading underscore.
-    if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
-      ac_cv_sys_symbol_underscore=yes
-    else
-      if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
-	:
-      else
-	echo "configure: cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
-      fi
-    fi
-  else
-    echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
-  fi
-else
-  echo "configure: failed program was:" >&AC_FD_CC
-  cat conftest.c >&AC_FD_CC
-fi
-rm -rf conftest*
-])
-AC_MSG_RESULT($ac_cv_sys_symbol_underscore)
-USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no}
-AC_SUBST(USE_SYMBOL_UNDERSCORE)dnl
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN(AC_CHECK_LIBM, [
-AC_CHECK_LIB(mw, _mwvalidcheckl)
-AC_CHECK_LIB(m, cos)
 ])
 
 # AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
@@ -720,13 +517,14 @@ AC_CHECK_LIB(m, cos)
 # '${top_builddir}/' (note the single quotes!) if your package is not
 # flat, and, if you're not using automake, define top_builddir as
 # appropriate in the Makefiles.
-AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [
+AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
   case "$enable_ltdl_convenience" in
   no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
   "") enable_ltdl_convenience=yes
       ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
   esac
   LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
+  INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
 ])
 
 # AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
@@ -738,16 +536,23 @@ AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [
 # flat, and, if you're not using automake, define top_builddir as
 # appropriate in the Makefiles.
 # In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [
-  AC_CHECK_LIB(ltdl, main, LIBLTDL="-lltdl", [
-    case "$enable_ltdl_install" in
-    no) AC_MSG_WARN([libltdl not installed, but installation disabled]) ;;
-    "") enable_ltdl_install=yes
-        ac_configure_args="$ac_configure_args --enable-ltdl-install" ;;
-    esac
+AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+  AC_CHECK_LIB(ltdl, main,
+  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+  [if test x"$enable_ltdl_install" = xno; then
+     AC_MSG_WARN([libltdl not installed, but installation disabled])
+   else
+     enable_ltdl_install=yes
+   fi
   ])
-  if test x"$enable_ltdl_install" != x"no"; then
+  if test x"$enable_ltdl_install" = x"yes"; then
+    ac_configure_args="$ac_configure_args --enable-ltdl-install"
     LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
+    INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
+  else
+    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+    LIBLTDL="-lltdl"
+    INCLTDL=
   fi
 ])
 
@@ -759,9 +564,9 @@ AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
 AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
 AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
 AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
-AC_DEFUN(AM_SYS_NM_PARSE, [indir([AC_SYS_NM_PARSE])])dnl
-AC_DEFUN(AM_SYS_SYMBOL_UNDERSCORE, [indir([AC_SYS_SYMBOL_UNDERSCORE])])dnl
-AC_DEFUN(AM_SYS_LIBTOOL_CYGWIN, [indir([AC_SYS_LIBTOOL_CYGWIN])])dnl
+
+dnl This is just to silence aclocal about the macro not being used
+ifelse([AC_DISABLE_FAST_INSTALL])dnl
 
 # Like AC_CONFIG_HEADER, but automatically create stamp file.
 
diff --git a/gas/configure b/gas/configure
index 62d35d1..e7d4901 100755
--- a/gas/configure
+++ b/gas/configure
@@ -1,7 +1,7 @@
 #! /bin/sh
 
 # Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13.1 
+# Generated automatically using autoconf version 2.13 
 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
 #
 # This configure script is free software; the Free Software Foundation
@@ -20,7 +20,7 @@ ac_help="$ac_help
 ac_help="$ac_help
   --with-gnu-ld           assume the C compiler uses GNU ld [default=no]"
 ac_help="$ac_help
-  --disable-libtool-lock  force libtool not to do file locking"
+  --disable-libtool-lock  avoid locking (might break parallel builds)"
 ac_help="$ac_help
   --enable-bfd-assembler  use BFD back end for writing object files"
 ac_help="$ac_help
@@ -51,6 +51,7 @@ program_suffix=NONE
 program_transform_name=s,x,x,
 silent=
 site=
+sitefile=
 srcdir=
 target=NONE
 verbose=
@@ -165,6 +166,7 @@ Configuration:
   --help                  print this message
   --no-create             do not create output files
   --quiet, --silent       do not print \`checking...' messages
+  --site-file=FILE        use FILE as the site file
   --version               print the version of autoconf that created configure
 Directory and file names:
   --prefix=PREFIX         install architecture-independent files in PREFIX
@@ -335,6 +337,11 @@ EOF
   -site=* | --site=* | --sit=*)
     site="$ac_optarg" ;;
 
+  -site-file | --site-file | --site-fil | --site-fi | --site-f)
+    ac_prev=sitefile ;;
+  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
+    sitefile="$ac_optarg" ;;
+
   -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
     ac_prev=srcdir ;;
   -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
@@ -356,7 +363,7 @@ EOF
     verbose=yes ;;
 
   -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13.1"
+    echo "configure generated by autoconf version 2.13"
     exit 0 ;;
 
   -with-* | --with-*)
@@ -500,12 +507,16 @@ fi
 srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
 
 # Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
-  if test "x$prefix" != xNONE; then
-    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-  else
-    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+if test -z "$sitefile"; then
+  if test -z "$CONFIG_SITE"; then
+    if test "x$prefix" != xNONE; then
+      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+    else
+      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+    fi
   fi
+else
+  CONFIG_SITE="$sitefile"
 fi
 for ac_site_file in $CONFIG_SITE; do
   if test -r "$ac_site_file"; then
@@ -516,7 +527,7 @@ done
 
 if test -r "$cache_file"; then
   echo "loading cache $cache_file"
-      test -f "$cache_file" && . $cache_file
+  . $cache_file
 else
   echo "creating cache $cache_file"
   > $cache_file
@@ -560,130 +571,9 @@ done
 if test -z "$ac_aux_dir"; then
   { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
 fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:570: checking host system type" >&5
-if test "x$ac_cv_host" = "x" || (test "x$host" != "xNONE" && test "x$host" != "x$ac_cv_host_alias"); then
-
-# Make sure we can run config.sub.
-  if $ac_config_sub sun4 >/dev/null 2>&1; then :
-    else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-  fi
-
-  ac_cv_host_alias=$host
-  case "$ac_cv_host_alias" in
-  NONE)
-    case $nonopt in
-    NONE)
-      if ac_cv_host_alias=`$ac_config_guess`; then :
-      else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-      fi ;;
-    *) ac_cv_host_alias=$nonopt ;;
-    esac ;;
-  esac
-
-  ac_cv_host=`$ac_config_sub $ac_cv_host_alias`
-  ac_cv_host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-  ac_cv_host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-  ac_cv_host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-else
-  echo $ac_n "(cached) $ac_c" 1>&6
-fi
-
-echo "$ac_t""$ac_cv_host" 1>&6
-
-host=$ac_cv_host
-host_alias=$ac_cv_host_alias
-host_cpu=$ac_cv_host_cpu
-host_vendor=$ac_cv_host_vendor
-host_os=$ac_cv_host_os
-
-
-
-
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:611: checking target system type" >&5
-if test "x$ac_cv_target" = "x" || (test "x$target" != "xNONE" && test "x$target" != "x$ac_cv_target_alias"); then
-
-# Make sure we can run config.sub.
-  if $ac_config_sub sun4 >/dev/null 2>&1; then :
-    else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-  fi
-
-  ac_cv_target_alias=$target
-  case "$ac_cv_target_alias" in
-  NONE)
-    case $nonopt in
-    NONE)
-      ac_cv_target_alias=$host_alias ;;
-
-    *) ac_cv_target_alias=$nonopt ;;
-    esac ;;
-  esac
-
-  ac_cv_target=`$ac_config_sub $ac_cv_target_alias`
-  ac_cv_target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-  ac_cv_target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-  ac_cv_target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-else
-  echo $ac_n "(cached) $ac_c" 1>&6
-fi
-
-echo "$ac_t""$ac_cv_target" 1>&6
-
-target=$ac_cv_target
-target_alias=$ac_cv_target_alias
-target_cpu=$ac_cv_target_cpu
-target_vendor=$ac_cv_target_vendor
-target_os=$ac_cv_target_os
-
-
-
-
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:651: checking build system type" >&5
-if test "x$ac_cv_build" = "x" || (test "x$build" != "xNONE" && test "x$build" != "x$ac_cv_build_alias"); then
-
-# Make sure we can run config.sub.
-  if $ac_config_sub sun4 >/dev/null 2>&1; then :
-    else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-  fi
-
-  ac_cv_build_alias=$build
-  case "$ac_cv_build_alias" in
-  NONE)
-    case $nonopt in
-    NONE)
-      ac_cv_build_alias=$host_alias ;;
-
-    *) ac_cv_build_alias=$nonopt ;;
-    esac ;;
-  esac
-
-  ac_cv_build=`$ac_config_sub $ac_cv_build_alias`
-  ac_cv_build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-  ac_cv_build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-  ac_cv_build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-else
-  echo $ac_n "(cached) $ac_c" 1>&6
-fi
-
-echo "$ac_t""$ac_cv_build" 1>&6
-
-build=$ac_cv_build
-build_alias=$ac_cv_build_alias
-build_cpu=$ac_cv_build_cpu
-build_vendor=$ac_cv_build_vendor
-build_os=$ac_cv_build_os
-
-
-
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
 
 
 # Do some error checking and defaulting for the host and target type.
@@ -706,6 +596,69 @@ NONE---*---* | *---NONE---* | *---*---NONE) ;;
 *) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
 esac
 
+
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:607: checking host system type" >&5
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+  case $nonopt in
+  NONE)
+    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+    fi ;;
+  *) host_alias=$nonopt ;;
+  esac ;;
+esac
+
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:628: checking target system type" >&5
+
+target_alias=$target
+case "$target_alias" in
+NONE)
+  case $nonopt in
+  NONE) target_alias=$host_alias ;;
+  *) target_alias=$nonopt ;;
+  esac ;;
+esac
+
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:646: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+  case $nonopt in
+  NONE) build_alias=$host_alias ;;
+  *) build_alias=$nonopt ;;
+  esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
 test "$host_alias" != "$target_alias" &&
   test "$program_prefix$program_suffix$program_transform_name" = \
     NONENONEs,x,x, &&
@@ -724,9 +677,9 @@ test "$host_alias" != "$target_alias" &&
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:728: checking for a BSD compatible install" >&5
+echo "configure:681: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
-if eval "test \"\${ac_cv_path_install+set}\" = set"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
     IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
@@ -744,10 +697,6 @@ else
             grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
 	    # AIX install.  It has an incompatible calling convention.
 	    :
-	  elif test $ac_prog = install &&
-	    grep pwplus $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # program-specific install script used by HP pwplus--don't use.
-	    :
 	  else
 	    ac_cv_path_install="$ac_dir/$ac_prog -c"
 	    break 2
@@ -776,12 +725,12 @@ echo "$ac_t""$INSTALL" 1>&6
 # It thinks the first close brace ends the variable substitution.
 test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
 
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
 
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
 echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:785: checking whether build environment is sane" >&5
+echo "configure:734: checking whether build environment is sane" >&5
 # Just in case
 sleep 1
 echo timestamp > conftestfile
@@ -829,18 +778,18 @@ EOF_SED
   rm -f conftestsed
 fi
 test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},;$program_transform_name"
+  program_transform_name="s,^,${program_prefix},; $program_transform_name"
 # Use a double $ so make ignores it.
 test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},;$program_transform_name"
+  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
 
 # sed with no file args requires a program.
 test "$program_transform_name" = "" && program_transform_name="s,x,x,"
 
 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:842: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:791: checking whether ${MAKE-make} sets \${MAKE}" >&5
 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
+if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftestmake <<\EOF
@@ -884,7 +833,7 @@ EOF
 
 missing_dir=`cd $ac_aux_dir && pwd`
 echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:888: checking for working aclocal" >&5
+echo "configure:837: checking for working aclocal" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -897,7 +846,7 @@ else
 fi
 
 echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:901: checking for working autoconf" >&5
+echo "configure:850: checking for working autoconf" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -910,7 +859,7 @@ else
 fi
 
 echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:914: checking for working automake" >&5
+echo "configure:863: checking for working automake" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -923,7 +872,7 @@ else
 fi
 
 echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:927: checking for working autoheader" >&5
+echo "configure:876: checking for working autoheader" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -936,7 +885,7 @@ else
 fi
 
 echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:940: checking for working makeinfo" >&5
+echo "configure:889: checking for working makeinfo" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -1022,8 +971,8 @@ fi
 # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1026: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_RANLIB+set}\" = set"; then
+echo "configure:975: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$RANLIB"; then
@@ -1052,8 +1001,8 @@ fi
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1056: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:1005: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
@@ -1082,8 +1031,8 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1086: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:1035: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
@@ -1129,12 +1078,12 @@ fi
 
   if test -z "$CC"; then
     case "`uname -s`" in
-    *win32* | *WIN32* | *CYGWIN*)
+    *win32* | *WIN32*)
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1137: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:1086: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
@@ -1164,8 +1113,8 @@ fi
   test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
 fi
 
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1169: checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) works" >&5
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:1118: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -1176,12 +1125,12 @@ cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 1180 "configure"
+#line 1129 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:1185: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1134: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -1206,14 +1155,14 @@ echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
 if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1211: checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:1160: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1216: checking whether we are using GNU C" >&5
-if eval "test \"\${ac_cv_prog_gcc+set}\" = set"; then
+echo "configure:1165: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.c <<EOF
@@ -1221,7 +1170,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1225: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1174: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -1240,8 +1189,8 @@ ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1244: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"\${ac_cv_prog_cc_g+set}\" = set"; then
+echo "configure:1193: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   echo 'void f(){}' > conftest.c
@@ -1283,11 +1232,11 @@ ac_prog=ld
 if test "$ac_cv_prog_gcc" = yes; then
   # Check if gcc -print-prog-name=ld gives a path.
   echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1287: checking for ld used by GCC" >&5
+echo "configure:1236: checking for ld used by GCC" >&5
   ac_prog=`($CC -print-prog-name=ld) 2>&5`
   case "$ac_prog" in
     # Accept absolute paths.
-    /* | [A-Za-z]:[\\/]*)
+    [\\/]* | [A-Za-z]:[\\/]*)
       re_direlt='/[^/][^/]*/\.\./'
       # Canonicalize the path of ld
       ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
@@ -1307,19 +1256,19 @@ echo "configure:1287: checking for ld used by GCC" >&5
   esac
 elif test "$with_gnu_ld" = yes; then
   echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1311: checking for GNU ld" >&5
+echo "configure:1260: checking for GNU ld" >&5
 else
   echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1314: checking for non-GNU ld" >&5
+echo "configure:1263: checking for non-GNU ld" >&5
 fi
-if eval "test \"\${ac_cv_path_LD+set}\" = set"; then
+if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
   for ac_dir in $PATH; do
     test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog"; then
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
       ac_cv_path_LD="$ac_dir/$ac_prog"
       # Check to see if the program is GNU ld.  I'd rather use --version,
       # but apparently some GNU ld's only accept -v.
@@ -1344,10 +1293,9 @@ else
   echo "$ac_t""no" 1>&6
 fi
 test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-
 echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1350: checking if the linker ($LD) is GNU ld" >&5
-if eval "test \"\${ac_cv_prog_gnu_ld+set}\" = set"; then
+echo "configure:1298: checking if the linker ($LD) is GNU ld" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   # I'd rather use --version here, but apparently some GNU ld's only accept -v.
@@ -1362,18 +1310,18 @@ echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6
 
 
 echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1366: checking for BSD-compatible nm" >&5
-if eval "test \"\${ac_cv_path_NM+set}\" = set"; then
+echo "configure:1314: checking for BSD-compatible nm" >&5
+if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$NM"; then
   # Let the user override the test.
   ac_cv_path_NM="$NM"
 else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
   for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
     test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/nm; then
+    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
       # Check to see if the nm accepts a BSD-compat flag.
       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
       #   nm: unknown option "B" ignored
@@ -1397,214 +1345,9 @@ fi
 NM="$ac_cv_path_NM"
 echo "$ac_t""$NM" 1>&6
 
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-echo $ac_n "checking command to parse $NM output""... $ac_c" 1>&6
-echo "configure:1404: checking command to parse $NM output" >&5
-if eval "test \"\${ac_cv_sys_global_symbol_pipe+set}\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  # These are sane defaults that work on at least a few old systems.
-# {They come from Ultrix.  What could be older than Ultrix?!! ;)}
-
-# Character class describing NM global symbol codes.
-ac_symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-ac_symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-# Define system-specific variables.
-case "$host_os" in
-aix*)
-  ac_symcode='[BCDT]'
-  ;;
-cygwin* | mingw*)
-  ac_symcode='[ABCDGISTW]'
-  ;;
-hpux*)
-  ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
-  ;;
-irix*)
-  ac_symcode='[BCDEGRST]'
-  ;;
-solaris*)
-  ac_symcode='[BDT]'
-  ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
-  ac_symcode='[ABCDGISTW]'
-fi
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
-  ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.* 	\($ac_symcode\) 	 	*\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'"
-
-  # Check to see that the pipe works correctly.
-  ac_pipe_works=no
-  rm -f conftest.$ac_ext
-  cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func;return 0;}
-EOF
-
-  if { (eval echo configure:1467: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    # Now try to grab the symbols.
-    ac_nlist=conftest.nm
-  
-    if { (eval echo configure:1471: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then
-
-      # Try sorting and uniquifying the output.
-      if sort "$ac_nlist" | uniq > "$ac_nlist"T; then
-	mv -f "$ac_nlist"T "$ac_nlist"
-      else
-	rm -f "$ac_nlist"T
-      fi
-
-      # Make sure that we snagged all the symbols we need.
-      if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then
-	if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then
-	  cat <<EOF > conftest.c
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
-	  # Now generate the symbol file.
-	  eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c'
-
-	  cat <<EOF >> conftest.c
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
-  const char *name;
-  lt_ptr_t address;
-}
-lt_preloaded_symbols[] =
-{
-EOF
-	sed 's/^. \(.*\) \(.*\)$/  {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c
-	cat <<\EOF >> conftest.c
-  {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
-	  # Now try linking the two files.
-	  mv conftest.$ac_objext conftestm.$ac_objext
-	  ac_save_LIBS="$LIBS"
-	  ac_save_CFLAGS="$CFLAGS"
-	  LIBS="conftestm.$ac_objext"
-	  CFLAGS="$CFLAGS$no_builtin_flag"
-	  if { (eval echo configure:1523: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-	    ac_pipe_works=yes
-	  else
-	    echo "configure: failed program was:" >&5
-	    cat conftest.c >&5
-	  fi
-	  LIBS="$ac_save_LIBS"
-	  CFLAGS="$ac_save_CFLAGS"
-	else
-	  echo "cannot find nm_test_func in $ac_nlist" >&5
-	fi
-      else
-	echo "cannot find nm_test_var in $ac_nlist" >&5
-      fi
-    else
-      echo "cannot run $ac_cv_sys_global_symbol_pipe" >&5
-    fi
-  else
-    echo "$progname: failed program was:" >&5
-    cat conftest.c >&5
-  fi
-  rm -rf conftest*
-
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$ac_pipe_works" = yes; then
-    if test x"$ac_symprfx" = x"_"; then
-      ac_cv_sys_symbol_underscore=yes
-    else
-      ac_cv_sys_symbol_underscore=no
-    fi
-    break
-  else
-    ac_cv_sys_global_symbol_pipe=
-  fi
-done
-
-fi
-
-
-ac_result=yes
-if test -z "$ac_cv_sys_global_symbol_pipe"; then
-   ac_result=no
-fi
-echo "$ac_t""$ac_result" 1>&6
-
-echo $ac_n "checking for _ prefix in compiled symbols""... $ac_c" 1>&6
-echo "configure:1569: checking for _ prefix in compiled symbols" >&5
-if eval "test \"\${ac_cv_sys_symbol_underscore+set}\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  ac_cv_sys_symbol_underscore=no
-cat > conftest.$ac_ext <<EOF
-void nm_test_func(){}
-int main(){nm_test_func;return 0;}
-EOF
-if { (eval echo configure:1578: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  # Now try to grab the symbols.
-  ac_nlist=conftest.nm
-  if { (eval echo configure:1581: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then
-    # See whether the symbols have a leading underscore.
-    if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
-      ac_cv_sys_symbol_underscore=yes
-    else
-      if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
-	:
-      else
-	echo "configure: cannot find nm_test_func in $ac_nlist" >&5
-      fi
-    fi
-  else
-    echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&5
-  fi
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.c >&5
-fi
-rm -rf conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_sys_symbol_underscore" 1>&6
-USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no}
-
 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1607: checking whether ln -s works" >&5
-if eval "test \"\${ac_cv_prog_LN_S+set}\" = set"; then
+echo "configure:1350: checking whether ln -s works" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   rm -f conftestdata
@@ -1623,30 +1366,37 @@ else
   echo "$ac_t""no" 1>&6
 fi
 
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
 
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
 
 # Check for any special flags to pass to ltconfig.
 libtool_flags="--cache-file=$cache_file"
 test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
 test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
 test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
 test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
 test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
 
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+  enableval="$enable_libtool_lock"
+  :
+fi
+
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+
 # Some flags need to be propagated to the compiler or linker for good
 # libtool support.
-case "$host" in
+case "$lt_target" in
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 1649 "configure"' > conftest.$ac_ext
-  if { (eval echo configure:1650: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  echo '#line 1399 "configure"' > conftest.$ac_ext
+  if { (eval echo configure:1400: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
     case "`/usr/bin/file conftest.o`" in
     *32-bit*)
       LD="${LD-ld} -32"
@@ -1667,19 +1417,19 @@ case "$host" in
   SAVE_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -belf"
   echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:1671: checking whether the C compiler needs -belf" >&5
-if eval "test \"\${lt_cv_cc_needs_belf+set}\" = set"; then
+echo "configure:1421: checking whether the C compiler needs -belf" >&5
+if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1676 "configure"
+#line 1426 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:1683: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1433: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   lt_cv_cc_needs_belf=yes
 else
@@ -1698,161 +1448,9 @@ echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
   fi
   ;;
 
-*-*-cygwin*)
-  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1706: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_DLLTOOL+set}\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_DLLTOOL"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1738: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_DLLTOOL+set}\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  DLLTOOL="false"
-fi
-fi
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1773: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_AS+set}\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_AS"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1805: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_AS+set}\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  AS="false"
-fi
-fi
-
-
-  ;;
 
 esac
 
-# enable the --disable-libtool-lock switch
-
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
-  enableval="$enable_libtool_lock"
-  need_locks=$enableval
-else
-  need_locks=yes
-fi
-
-
-if test x"$need_locks" = xno; then
-  libtool_flags="$libtool_flags --disable-lock"
-fi
-
 
 # Save cache, so that ltconfig can load it
 cat > confcache <<\EOF
@@ -1905,16 +1503,17 @@ rm -f confcache
 
 # Actually configure libtool.  ac_aux_dir is where install-sh is found.
 CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
-DLLTOOL="$DLLTOOL" AS="$AS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
 ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
 || { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
 
 # Reload cache, that may have been modified by ltconfig
 if test -r "$cache_file"; then
   echo "loading cache $cache_file"
-      test -f "$cache_file" && . $cache_file
+  . $cache_file
 else
   echo "creating cache $cache_file"
   > $cache_file
@@ -2089,7 +1688,7 @@ for this_target in $target $canon_targets ; do
       arm-*-netbsd*)	                fmt=aout em=nbsd bfd_gas=yes ;;
       arm-*-oabi | thumb-*-oabi)        fmt=elf ;;
       arm-epoc-pe | thumb-epoc-pe)      fmt=coff em=epoc-pe ;;
-      arm-*-wince)         fmt=coff em=wince-pe bfd_gas=yes;;
+      arm-*-wince)          fmt=coff em=wince-pe bfd_gas=yes;;
       arm-*-pe | thumb-*-pe)            fmt=coff em=pe ;;
       arm-*-riscix*)	                fmt=aout em=riscix ;;
 
@@ -2757,8 +2356,8 @@ EOF
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2758: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:2360: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
@@ -2787,8 +2386,8 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2788: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:2390: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
@@ -2834,12 +2433,12 @@ fi
 
   if test -z "$CC"; then
     case "`uname -s`" in
-    *win32* | *WIN32* | *CYGWIN*)
+    *win32* | *WIN32*)
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2839: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:2441: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
@@ -2869,8 +2468,8 @@ fi
   test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
 fi
 
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:2871: checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) works" >&5
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:2473: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -2881,12 +2480,12 @@ cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 2882 "configure"
+#line 2484 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:2887: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2489: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -2911,14 +2510,14 @@ echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
 if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2913: checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:2515: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2918: checking whether we are using GNU C" >&5
-if eval "test \"\${ac_cv_prog_gcc+set}\" = set"; then
+echo "configure:2520: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.c <<EOF
@@ -2926,7 +2525,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2927: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2529: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -2945,8 +2544,8 @@ ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2946: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"\${ac_cv_prog_cc_g+set}\" = set"; then
+echo "configure:2548: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   echo 'void f(){}' > conftest.c
@@ -2982,8 +2581,8 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2983: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_YACC+set}\" = set"; then
+echo "configure:2585: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$YACC"; then
@@ -3013,13 +2612,13 @@ done
 test -n "$YACC" || YACC="yacc"
 
 echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:3014: checking how to run the C preprocessor" >&5
+echo "configure:2616: checking how to run the C preprocessor" >&5
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
 fi
 if test -z "$CPP"; then
-if eval "test \"\${ac_cv_prog_CPP+set}\" = set"; then
+if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
     # This must be in double quotes, not single quotes, because CPP may get
@@ -3028,13 +2627,13 @@ else
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp.
   cat > conftest.$ac_ext <<EOF
-#line 3029 "configure"
+#line 2631 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3035: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2637: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -3045,13 +2644,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -E -traditional-cpp"
   cat > conftest.$ac_ext <<EOF
-#line 3046 "configure"
+#line 2648 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3052: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2654: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -3062,13 +2661,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -nologo -E"
   cat > conftest.$ac_ext <<EOF
-#line 3063 "configure"
+#line 2665 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3069: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2671: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -3098,8 +2697,8 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3099: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_LEX+set}\" = set"; then
+echo "configure:2701: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$LEX"; then
@@ -3131,8 +2730,8 @@ test -n "$LEX" || LEX=""$missing_dir/missing flex""
 # Extract the first word of "flex", so it can be a program name with args.
 set dummy flex; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3132: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_LEX+set}\" = set"; then
+echo "configure:2734: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$LEX"; then
@@ -3165,15 +2764,15 @@ then
   *) ac_lib=l ;;
   esac
   echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
-echo "configure:3166: checking for yywrap in -l$ac_lib" >&5
-ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-:%__p__%'`
-if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
+echo "configure:2768: checking for yywrap in -l$ac_lib" >&5
+ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_save_LIBS="$LIBS"
 LIBS="-l$ac_lib  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3174 "configure"
+#line 2776 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3184,7 +2783,7 @@ int main() {
 yywrap()
 ; return 0; }
 EOF
-if { (eval echo configure:3185: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2787: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -3207,8 +2806,8 @@ fi
 fi
 
 echo $ac_n "checking lex output file root""... $ac_c" 1>&6
-echo "configure:3208: checking lex output file root" >&5
-if eval "test \"\${ac_cv_prog_lex_root+set}\" = set"; then
+echo "configure:2810: checking lex output file root" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   # The minimal lex program is just a single line: %%.  But some broken lexes
@@ -3228,8 +2827,8 @@ echo "$ac_t""$ac_cv_prog_lex_root" 1>&6
 LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
 
 echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6
-echo "configure:3229: checking whether yytext is a pointer" >&5
-if eval "test \"\${ac_cv_prog_lex_yytext_pointer+set}\" = set"; then
+echo "configure:2831: checking whether yytext is a pointer" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   # POSIX says lex can declare yytext either as a pointer or an array; the
@@ -3240,14 +2839,14 @@ echo 'extern char *yytext;' >>$LEX_OUTPUT_ROOT.c
 ac_save_LIBS="$LIBS"
 LIBS="$LIBS $LEXLIB"
 cat > conftest.$ac_ext <<EOF
-#line 3241 "configure"
+#line 2843 "configure"
 #include "confdefs.h"
 `cat $LEX_OUTPUT_ROOT.c`
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:3248: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2850: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_prog_lex_yytext_pointer=yes
 else
@@ -3271,7 +2870,7 @@ fi
 
 ALL_LINGUAS=
 echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
-echo "configure:3272: checking for POSIXized ISC" >&5
+echo "configure:2874: checking for POSIXized ISC" >&5
 if test -d /etc/conf/kconfig.d &&
   grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
 then
@@ -3292,12 +2891,12 @@ else
 fi
 
 echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:3293: checking for ANSI C header files" >&5
-if eval "test \"\${ac_cv_header_stdc+set}\" = set"; then
+echo "configure:2895: checking for ANSI C header files" >&5
+if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3298 "configure"
+#line 2900 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 #include <stdarg.h>
@@ -3305,7 +2904,7 @@ else
 #include <float.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3306: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2908: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -3322,7 +2921,7 @@ rm -f conftest*
 if test $ac_cv_header_stdc = yes; then
   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 3323 "configure"
+#line 2925 "configure"
 #include "confdefs.h"
 #include <string.h>
 EOF
@@ -3340,7 +2939,7 @@ fi
 if test $ac_cv_header_stdc = yes; then
   # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 3341 "configure"
+#line 2943 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 EOF
@@ -3361,7 +2960,7 @@ if test "$cross_compiling" = yes; then
   :
 else
   cat > conftest.$ac_ext <<EOF
-#line 3362 "configure"
+#line 2964 "configure"
 #include "confdefs.h"
 #include <ctype.h>
 #define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
@@ -3372,7 +2971,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
 exit (0); }
 
 EOF
-if { (eval echo configure:3373: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2975: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   :
 else
@@ -3396,12 +2995,12 @@ EOF
 fi
 
 echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:3397: checking for working const" >&5
-if eval "test \"\${ac_cv_c_const+set}\" = set"; then
+echo "configure:2999: checking for working const" >&5
+if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3402 "configure"
+#line 3004 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -3450,7 +3049,7 @@ ccp = (char const *const *) p;
 
 ; return 0; }
 EOF
-if { (eval echo configure:3451: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3053: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_const=yes
 else
@@ -3471,21 +3070,21 @@ EOF
 fi
 
 echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:3472: checking for inline" >&5
-if eval "test \"\${ac_cv_c_inline+set}\" = set"; then
+echo "configure:3074: checking for inline" >&5
+if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_cv_c_inline=no
 for ac_kw in inline __inline__ __inline; do
   cat > conftest.$ac_ext <<EOF
-#line 3479 "configure"
+#line 3081 "configure"
 #include "confdefs.h"
 
 int main() {
-} $ac_kw int foo() {
+} $ac_kw foo() {
 ; return 0; }
 EOF
-if { (eval echo configure:3486: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3088: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_inline=$ac_kw; break
 else
@@ -3511,12 +3110,12 @@ EOF
 esac
 
 echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:3512: checking for off_t" >&5
-if eval "test \"\${ac_cv_type_off_t+set}\" = set"; then
+echo "configure:3114: checking for off_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3517 "configure"
+#line 3119 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -3527,31 +3126,29 @@ EOF
 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
   egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
   rm -rf conftest*
-  eval "ac_cv_type_off_t=yes"
+  ac_cv_type_off_t=yes
 else
   rm -rf conftest*
-  eval "ac_cv_type_off_t=no"
+  ac_cv_type_off_t=no
 fi
 rm -f conftest*
 
 fi
-if eval "test \"`echo '$ac_cv_type_'off_t`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-  cat >> confdefs.h <<EOF
+echo "$ac_t""$ac_cv_type_off_t" 1>&6
+if test $ac_cv_type_off_t = no; then
+  cat >> confdefs.h <<\EOF
 #define off_t long
 EOF
 
 fi
 
 echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:3547: checking for size_t" >&5
-if eval "test \"\${ac_cv_type_size_t+set}\" = set"; then
+echo "configure:3147: checking for size_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3552 "configure"
+#line 3152 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -3562,19 +3159,17 @@ EOF
 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
   egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
   rm -rf conftest*
-  eval "ac_cv_type_size_t=yes"
+  ac_cv_type_size_t=yes
 else
   rm -rf conftest*
-  eval "ac_cv_type_size_t=no"
+  ac_cv_type_size_t=no
 fi
 rm -f conftest*
 
 fi
-if eval "test \"`echo '$ac_cv_type_'size_t`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-  cat >> confdefs.h <<EOF
+echo "$ac_t""$ac_cv_type_size_t" 1>&6
+if test $ac_cv_type_size_t = no; then
+  cat >> confdefs.h <<\EOF
 #define size_t unsigned
 EOF
 
@@ -3583,19 +3178,19 @@ fi
 # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
 # for constant arguments.  Useless!
 echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:3584: checking for working alloca.h" >&5
-if eval "test \"\${ac_cv_header_alloca_h+set}\" = set"; then
+echo "configure:3182: checking for working alloca.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3589 "configure"
+#line 3187 "configure"
 #include "confdefs.h"
 #include <alloca.h>
 int main() {
 char *p = alloca(2 * sizeof(int));
 ; return 0; }
 EOF
-if { (eval echo configure:3596: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3194: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_header_alloca_h=yes
 else
@@ -3616,12 +3211,12 @@ EOF
 fi
 
 echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:3617: checking for alloca" >&5
-if eval "test \"\${ac_cv_func_alloca_works+set}\" = set"; then
+echo "configure:3215: checking for alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3622 "configure"
+#line 3220 "configure"
 #include "confdefs.h"
 
 #ifdef __GNUC__
@@ -3649,7 +3244,7 @@ int main() {
 char *p = (char *) alloca(1);
 ; return 0; }
 EOF
-if { (eval echo configure:3650: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3248: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_func_alloca_works=yes
 else
@@ -3681,12 +3276,12 @@ EOF
 
 
 echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:3682: checking whether alloca needs Cray hooks" >&5
-if eval "test \"\${ac_cv_os_cray+set}\" = set"; then
+echo "configure:3280: checking whether alloca needs Cray hooks" >&5
+if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3687 "configure"
+#line 3285 "configure"
 #include "confdefs.h"
 #if defined(CRAY) && ! defined(CRAY2)
 webecray
@@ -3711,12 +3306,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6
 if test $ac_cv_os_cray = yes; then
 for ac_func in _getb67 GETB67 getb67; do
   echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3712: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:3310: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3717 "configure"
+#line 3315 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -3725,7 +3320,6 @@ else
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char $ac_func();
-char (*f)();
 
 int main() {
 
@@ -3735,12 +3329,12 @@ int main() {
 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
 choke me
 #else
-f = $ac_func;
+$ac_func();
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:3741: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3338: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -3767,15 +3361,15 @@ done
 fi
 
 echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:3768: checking stack direction for C alloca" >&5
-if eval "test \"\${ac_cv_c_stack_direction+set}\" = set"; then
+echo "configure:3365: checking stack direction for C alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test "$cross_compiling" = yes; then
   ac_cv_c_stack_direction=0
 else
   cat > conftest.$ac_ext <<EOF
-#line 3776 "configure"
+#line 3373 "configure"
 #include "confdefs.h"
 find_stack_direction ()
 {
@@ -3794,7 +3388,7 @@ main ()
   exit (find_stack_direction() < 0);
 }
 EOF
-if { (eval echo configure:3795: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3392: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_c_stack_direction=1
 else
@@ -3819,17 +3413,17 @@ for ac_hdr in unistd.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3820: checking for $ac_hdr" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:3417: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3825 "configure"
+#line 3422 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3830: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3427: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -3858,12 +3452,12 @@ done
 for ac_func in getpagesize
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3859: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:3456: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3864 "configure"
+#line 3461 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -3872,7 +3466,6 @@ else
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char $ac_func();
-char (*f)();
 
 int main() {
 
@@ -3882,12 +3475,12 @@ int main() {
 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
 choke me
 #else
-f = $ac_func;
+$ac_func();
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:3888: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3484: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -3912,15 +3505,15 @@ fi
 done
 
 echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:3913: checking for working mmap" >&5
-if eval "test \"\${ac_cv_func_mmap_fixed_mapped+set}\" = set"; then
+echo "configure:3509: checking for working mmap" >&5
+if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test "$cross_compiling" = yes; then
   ac_cv_func_mmap_fixed_mapped=no
 else
   cat > conftest.$ac_ext <<EOF
-#line 3921 "configure"
+#line 3517 "configure"
 #include "confdefs.h"
 
 /* Thanks to Mike Haertel and Jim Avera for this test.
@@ -4060,7 +3653,7 @@ main()
 }
 
 EOF
-if { (eval echo configure:4061: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3657: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_func_mmap_fixed_mapped=yes
 else
@@ -4088,17 +3681,17 @@ unistd.h values.h sys/param.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4089: checking for $ac_hdr" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:3685: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4094 "configure"
+#line 3690 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4099: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3695: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -4128,12 +3721,12 @@ done
 __argz_count __argz_stringify __argz_next
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4129: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:3725: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4134 "configure"
+#line 3730 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -4142,7 +3735,6 @@ else
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char $ac_func();
-char (*f)();
 
 int main() {
 
@@ -4152,12 +3744,12 @@ int main() {
 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
 choke me
 #else
-f = $ac_func;
+$ac_func();
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:4158: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3753: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -4186,12 +3778,12 @@ done
      for ac_func in stpcpy
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4187: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:3782: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4192 "configure"
+#line 3787 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -4200,7 +3792,6 @@ else
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char $ac_func();
-char (*f)();
 
 int main() {
 
@@ -4210,12 +3801,12 @@ int main() {
 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
 choke me
 #else
-f = $ac_func;
+$ac_func();
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:4216: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3810: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -4249,19 +3840,19 @@ EOF
 
    if test $ac_cv_header_locale_h = yes; then
     echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:4250: checking for LC_MESSAGES" >&5
-if eval "test \"\${am_cv_val_LC_MESSAGES+set}\" = set"; then
+echo "configure:3844: checking for LC_MESSAGES" >&5
+if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4255 "configure"
+#line 3849 "configure"
 #include "confdefs.h"
 #include <locale.h>
 int main() {
 return LC_MESSAGES
 ; return 0; }
 EOF
-if { (eval echo configure:4262: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3856: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   am_cv_val_LC_MESSAGES=yes
 else
@@ -4282,7 +3873,7 @@ EOF
     fi
   fi
    echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:4283: checking whether NLS is requested" >&5
+echo "configure:3877: checking whether NLS is requested" >&5
         # Check whether --enable-nls or --disable-nls was given.
 if test "${enable_nls+set}" = set; then
   enableval="$enable_nls"
@@ -4302,7 +3893,7 @@ fi
 EOF
 
       echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:4303: checking whether included gettext is requested" >&5
+echo "configure:3897: checking whether included gettext is requested" >&5
       # Check whether --with-included-gettext or --without-included-gettext was given.
 if test "${with_included_gettext+set}" = set; then
   withval="$with_included_gettext"
@@ -4321,17 +3912,17 @@ fi
 
 	ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:4322: checking for libintl.h" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:3916: checking for libintl.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4327 "configure"
+#line 3921 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4332: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3926: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -4348,19 +3939,19 @@ fi
 if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:4349: checking for gettext in libc" >&5
-if eval "test \"\${gt_cv_func_gettext_libc+set}\" = set"; then
+echo "configure:3943: checking for gettext in libc" >&5
+if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4354 "configure"
+#line 3948 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 int main() {
 return (int) gettext ("")
 ; return 0; }
 EOF
-if { (eval echo configure:4361: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3955: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gt_cv_func_gettext_libc=yes
 else
@@ -4376,15 +3967,15 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6
 
 	   if test "$gt_cv_func_gettext_libc" != "yes"; then
 	     echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:4377: checking for bindtextdomain in -lintl" >&5
-ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-:%__p__%'`
-if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
+echo "configure:3971: checking for bindtextdomain in -lintl" >&5
+ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_save_LIBS="$LIBS"
 LIBS="-lintl  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 4385 "configure"
+#line 3979 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -4395,7 +3986,7 @@ int main() {
 bindtextdomain()
 ; return 0; }
 EOF
-if { (eval echo configure:4396: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3990: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -4411,19 +4002,19 @@ fi
 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:4412: checking for gettext in libintl" >&5
-if eval "test \"\${gt_cv_func_gettext_libintl+set}\" = set"; then
+echo "configure:4006: checking for gettext in libintl" >&5
+if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4417 "configure"
+#line 4011 "configure"
 #include "confdefs.h"
 
 int main() {
 return (int) gettext ("")
 ; return 0; }
 EOF
-if { (eval echo configure:4424: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4018: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gt_cv_func_gettext_libintl=yes
 else
@@ -4451,8 +4042,8 @@ EOF
 	      # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4452: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_MSGFMT+set}\" = set"; then
+echo "configure:4046: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$MSGFMT" in
@@ -4485,12 +4076,12 @@ fi
 		for ac_func in dcgettext
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4486: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:4080: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4491 "configure"
+#line 4085 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -4499,7 +4090,6 @@ else
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char $ac_func();
-char (*f)();
 
 int main() {
 
@@ -4509,12 +4099,12 @@ int main() {
 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
 choke me
 #else
-f = $ac_func;
+$ac_func();
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:4515: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4108: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -4541,8 +4131,8 @@ done
 		# Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4542: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_GMSGFMT+set}\" = set"; then
+echo "configure:4135: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$GMSGFMT" in
@@ -4577,8 +4167,8 @@ fi
 		# Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4578: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_XGETTEXT+set}\" = set"; then
+echo "configure:4171: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$XGETTEXT" in
@@ -4609,7 +4199,7 @@ else
 fi
 
 		cat > conftest.$ac_ext <<EOF
-#line 4610 "configure"
+#line 4203 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -4617,7 +4207,7 @@ extern int _nl_msg_cat_cntr;
 			       return _nl_msg_cat_cntr
 ; return 0; }
 EOF
-if { (eval echo configure:4618: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4211: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   CATOBJEXT=.gmo
 		   DATADIRNAME=share
@@ -4649,8 +4239,8 @@ fi
         # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4650: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_MSGFMT+set}\" = set"; then
+echo "configure:4243: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$MSGFMT" in
@@ -4683,8 +4273,8 @@ fi
         # Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4684: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_GMSGFMT+set}\" = set"; then
+echo "configure:4277: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$GMSGFMT" in
@@ -4719,8 +4309,8 @@ fi
         # Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4720: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_XGETTEXT+set}\" = set"; then
+echo "configure:4313: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$XGETTEXT" in
@@ -4809,7 +4399,7 @@ fi
        LINGUAS=
      else
        echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:4810: checking for catalogs to be installed" >&5
+echo "configure:4403: checking for catalogs to be installed" >&5
        NEW_LINGUAS=
        for lang in ${LINGUAS=$ALL_LINGUAS}; do
          case "$ALL_LINGUAS" in
@@ -4837,17 +4427,17 @@ echo "configure:4810: checking for catalogs to be installed" >&5
       if test "$CATOBJEXT" = ".cat"; then
 	 ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:4838: checking for linux/version.h" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:4431: checking for linux/version.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4843 "configure"
+#line 4436 "configure"
 #include "confdefs.h"
 #include <linux/version.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4848: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4441: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -4910,7 +4500,7 @@ fi
   
 
 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:4911: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:4504: checking whether to enable maintainer-specific portions of Makefiles" >&5
     # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"
@@ -4933,12 +4523,12 @@ fi
   
 
 echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:4934: checking for Cygwin environment" >&5
-if eval "test \"\${ac_cv_cygwin+set}\" = set"; then
+echo "configure:4527: checking for Cygwin environment" >&5
+if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4939 "configure"
+#line 4532 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -4949,7 +4539,7 @@ int main() {
 return __CYGWIN__;
 ; return 0; }
 EOF
-if { (eval echo configure:4950: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4543: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_cygwin=yes
 else
@@ -4959,25 +4549,26 @@ else
   ac_cv_cygwin=no
 fi
 rm -f conftest*
+rm -f conftest*
 fi
 
 echo "$ac_t""$ac_cv_cygwin" 1>&6
 CYGWIN=
 test "$ac_cv_cygwin" = yes && CYGWIN=yes
 echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:4966: checking for mingw32 environment" >&5
-if eval "test \"\${ac_cv_mingw32+set}\" = set"; then
+echo "configure:4560: checking for mingw32 environment" >&5
+if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4971 "configure"
+#line 4565 "configure"
 #include "confdefs.h"
 
 int main() {
 return __MINGW32__;
 ; return 0; }
 EOF
-if { (eval echo configure:4978: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4572: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_mingw32=yes
 else
@@ -4987,57 +4578,29 @@ else
   ac_cv_mingw32=no
 fi
 rm -f conftest*
+rm -f conftest*
 fi
 
 echo "$ac_t""$ac_cv_mingw32" 1>&6
 MINGW32=
 test "$ac_cv_mingw32" = yes && MINGW32=yes
-echo $ac_n "checking for EMX OS/2 environment""... $ac_c" 1>&6
-echo "configure:4994: checking for EMX OS/2 environment" >&5
-if eval "test \"\${ac_cv_emxos2+set}\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 4999 "configure"
-#include "confdefs.h"
-
-int main() {
-return __EMX__;
-; return 0; }
-EOF
-if { (eval echo configure:5006: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_emxos2=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_emxos2=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_emxos2" 1>&6
-EMXOS2=
-test "$ac_cv_emxos2" = yes && EMXOS2=yes
-
 
 
 echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:5025: checking for executable suffix" >&5
-if eval "test \"\${ac_cv_exeext+set}\" = set"; then
+echo "configure:4591: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes || test "$EMXOS2" = yes; then
+  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
   ac_cv_exeext=.exe
 else
   rm -f conftest*
   echo 'int main () { return 0; }' > conftest.$ac_ext
   ac_cv_exeext=
-  if { (eval echo configure:5035: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+  if { (eval echo configure:4601: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
     for file in conftest.*; do
       case $file in
-      *.c | *.C | *.o | *.obj | *.xcoff) ;;
+      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
       *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
       esac
     done
@@ -5059,17 +4622,17 @@ for ac_hdr in string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h e
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:5060: checking for $ac_hdr" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:4626: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5065 "configure"
+#line 4631 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5070: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4636: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -5099,7 +4662,7 @@ done
 # Put this here so that autoconf's "cross-compiling" message doesn't confuse
 # people who are not cross-compiling but are compiling cross-assemblers.
 echo $ac_n "checking whether compiling a cross-assembler""... $ac_c" 1>&6
-echo "configure:5100: checking whether compiling a cross-assembler" >&5
+echo "configure:4666: checking whether compiling a cross-assembler" >&5
 if test "${host}" = "${target}"; then
   cross_gas=no
 else
@@ -5114,19 +4677,19 @@ echo "$ac_t""$cross_gas" 1>&6
 # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
 # for constant arguments.  Useless!
 echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:5115: checking for working alloca.h" >&5
-if eval "test \"\${ac_cv_header_alloca_h+set}\" = set"; then
+echo "configure:4681: checking for working alloca.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5120 "configure"
+#line 4686 "configure"
 #include "confdefs.h"
 #include <alloca.h>
 int main() {
 char *p = alloca(2 * sizeof(int));
 ; return 0; }
 EOF
-if { (eval echo configure:5127: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4693: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_header_alloca_h=yes
 else
@@ -5147,12 +4710,12 @@ EOF
 fi
 
 echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:5148: checking for alloca" >&5
-if eval "test \"\${ac_cv_func_alloca_works+set}\" = set"; then
+echo "configure:4714: checking for alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5153 "configure"
+#line 4719 "configure"
 #include "confdefs.h"
 
 #ifdef __GNUC__
@@ -5180,7 +4743,7 @@ int main() {
 char *p = (char *) alloca(1);
 ; return 0; }
 EOF
-if { (eval echo configure:5181: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4747: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_func_alloca_works=yes
 else
@@ -5212,12 +4775,12 @@ EOF
 
 
 echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:5213: checking whether alloca needs Cray hooks" >&5
-if eval "test \"\${ac_cv_os_cray+set}\" = set"; then
+echo "configure:4779: checking whether alloca needs Cray hooks" >&5
+if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5218 "configure"
+#line 4784 "configure"
 #include "confdefs.h"
 #if defined(CRAY) && ! defined(CRAY2)
 webecray
@@ -5242,12 +4805,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6
 if test $ac_cv_os_cray = yes; then
 for ac_func in _getb67 GETB67 getb67; do
   echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5243: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:4809: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5248 "configure"
+#line 4814 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -5256,7 +4819,6 @@ else
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char $ac_func();
-char (*f)();
 
 int main() {
 
@@ -5266,12 +4828,12 @@ int main() {
 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
 choke me
 #else
-f = $ac_func;
+$ac_func();
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:5272: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4837: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -5298,15 +4860,15 @@ done
 fi
 
 echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:5299: checking stack direction for C alloca" >&5
-if eval "test \"\${ac_cv_c_stack_direction+set}\" = set"; then
+echo "configure:4864: checking stack direction for C alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test "$cross_compiling" = yes; then
   ac_cv_c_stack_direction=0
 else
   cat > conftest.$ac_ext <<EOF
-#line 5307 "configure"
+#line 4872 "configure"
 #include "confdefs.h"
 find_stack_direction ()
 {
@@ -5325,7 +4887,7 @@ main ()
   exit (find_stack_direction() < 0);
 }
 EOF
-if { (eval echo configure:5326: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4891: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_c_stack_direction=1
 else
@@ -5347,21 +4909,21 @@ EOF
 fi
 
 echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:5348: checking for inline" >&5
-if eval "test \"\${ac_cv_c_inline+set}\" = set"; then
+echo "configure:4913: checking for inline" >&5
+if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_cv_c_inline=no
 for ac_kw in inline __inline__ __inline; do
   cat > conftest.$ac_ext <<EOF
-#line 5355 "configure"
+#line 4920 "configure"
 #include "confdefs.h"
 
 int main() {
-} $ac_kw int foo() {
+} $ac_kw foo() {
 ; return 0; }
 EOF
-if { (eval echo configure:5362: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4927: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_inline=$ac_kw; break
 else
@@ -5391,12 +4953,12 @@ esac
 for ac_func in unlink remove
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5392: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:4957: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5397 "configure"
+#line 4962 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -5405,7 +4967,6 @@ else
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char $ac_func();
-char (*f)();
 
 int main() {
 
@@ -5415,12 +4976,12 @@ int main() {
 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
 choke me
 #else
-f = $ac_func;
+$ac_func();
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:5421: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4985: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -5449,12 +5010,12 @@ done
 for ac_func in sbrk
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5450: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:5014: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5455 "configure"
+#line 5019 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -5463,7 +5024,6 @@ else
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char $ac_func();
-char (*f)();
 
 int main() {
 
@@ -5473,12 +5033,12 @@ int main() {
 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
 choke me
 #else
-f = $ac_func;
+$ac_func();
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:5479: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5042: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -5507,12 +5067,12 @@ done
 # enough, but on some of those systems, the assert macro relies on requoting
 # working properly!
 echo $ac_n "checking for working assert macro""... $ac_c" 1>&6
-echo "configure:5508: checking for working assert macro" >&5
-if eval "test \"\${gas_cv_assert_ok+set}\" = set"; then
+echo "configure:5071: checking for working assert macro" >&5
+if eval "test \"`echo '$''{'gas_cv_assert_ok'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5513 "configure"
+#line 5076 "configure"
 #include "confdefs.h"
 #include <assert.h>
 #include <stdio.h>
@@ -5528,7 +5088,7 @@ assert (a == b
 
 ; return 0; }
 EOF
-if { (eval echo configure:5529: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5092: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gas_cv_assert_ok=yes
 else
@@ -5569,12 +5129,12 @@ gas_test_headers="
 "
 
 echo $ac_n "checking whether declaration is required for strstr""... $ac_c" 1>&6
-echo "configure:5570: checking whether declaration is required for strstr" >&5
-if eval "test \"\${gas_cv_decl_needed_strstr+set}\" = set"; then
+echo "configure:5133: checking whether declaration is required for strstr" >&5
+if eval "test \"`echo '$''{'gas_cv_decl_needed_strstr'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5575 "configure"
+#line 5138 "configure"
 #include "confdefs.h"
 $gas_test_headers
 int main() {
@@ -5585,7 +5145,7 @@ x = (f) strstr;
 
 ; return 0; }
 EOF
-if { (eval echo configure:5586: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5149: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gas_cv_decl_needed_strstr=no
 else
@@ -5606,12 +5166,12 @@ fi
 
 
 echo $ac_n "checking whether declaration is required for malloc""... $ac_c" 1>&6
-echo "configure:5607: checking whether declaration is required for malloc" >&5
-if eval "test \"\${gas_cv_decl_needed_malloc+set}\" = set"; then
+echo "configure:5170: checking whether declaration is required for malloc" >&5
+if eval "test \"`echo '$''{'gas_cv_decl_needed_malloc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5612 "configure"
+#line 5175 "configure"
 #include "confdefs.h"
 $gas_test_headers
 int main() {
@@ -5622,7 +5182,7 @@ x = (f) malloc;
 
 ; return 0; }
 EOF
-if { (eval echo configure:5623: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5186: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gas_cv_decl_needed_malloc=no
 else
@@ -5643,12 +5203,12 @@ fi
 
 
 echo $ac_n "checking whether declaration is required for free""... $ac_c" 1>&6
-echo "configure:5644: checking whether declaration is required for free" >&5
-if eval "test \"\${gas_cv_decl_needed_free+set}\" = set"; then
+echo "configure:5207: checking whether declaration is required for free" >&5
+if eval "test \"`echo '$''{'gas_cv_decl_needed_free'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5649 "configure"
+#line 5212 "configure"
 #include "confdefs.h"
 $gas_test_headers
 int main() {
@@ -5659,7 +5219,7 @@ x = (f) free;
 
 ; return 0; }
 EOF
-if { (eval echo configure:5660: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5223: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gas_cv_decl_needed_free=no
 else
@@ -5680,12 +5240,12 @@ fi
 
 
 echo $ac_n "checking whether declaration is required for sbrk""... $ac_c" 1>&6
-echo "configure:5681: checking whether declaration is required for sbrk" >&5
-if eval "test \"\${gas_cv_decl_needed_sbrk+set}\" = set"; then
+echo "configure:5244: checking whether declaration is required for sbrk" >&5
+if eval "test \"`echo '$''{'gas_cv_decl_needed_sbrk'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5686 "configure"
+#line 5249 "configure"
 #include "confdefs.h"
 $gas_test_headers
 int main() {
@@ -5696,7 +5256,7 @@ x = (f) sbrk;
 
 ; return 0; }
 EOF
-if { (eval echo configure:5697: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5260: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gas_cv_decl_needed_sbrk=no
 else
@@ -5717,12 +5277,12 @@ fi
 
 
 echo $ac_n "checking whether declaration is required for environ""... $ac_c" 1>&6
-echo "configure:5718: checking whether declaration is required for environ" >&5
-if eval "test \"\${gas_cv_decl_needed_environ+set}\" = set"; then
+echo "configure:5281: checking whether declaration is required for environ" >&5
+if eval "test \"`echo '$''{'gas_cv_decl_needed_environ'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5723 "configure"
+#line 5286 "configure"
 #include "confdefs.h"
 $gas_test_headers
 int main() {
@@ -5733,7 +5293,7 @@ x = (f) environ;
 
 ; return 0; }
 EOF
-if { (eval echo configure:5734: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5297: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gas_cv_decl_needed_environ=no
 else
@@ -5757,12 +5317,12 @@ fi
 # for it?
 
 echo $ac_n "checking whether declaration is required for errno""... $ac_c" 1>&6
-echo "configure:5758: checking whether declaration is required for errno" >&5
-if eval "test \"\${gas_cv_decl_needed_errno+set}\" = set"; then
+echo "configure:5321: checking whether declaration is required for errno" >&5
+if eval "test \"`echo '$''{'gas_cv_decl_needed_errno'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5763 "configure"
+#line 5326 "configure"
 #include "confdefs.h"
 
 #ifdef HAVE_ERRNO_H
@@ -5777,7 +5337,7 @@ x = (f) errno;
 
 ; return 0; }
 EOF
-if { (eval echo configure:5778: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5341: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gas_cv_decl_needed_errno=no
 else
@@ -5889,7 +5449,7 @@ do
     echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
     exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
   -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13.1"
+    echo "$CONFIG_STATUS generated by autoconf version 2.13"
     exit 0 ;;
   -help | --help | --hel | --he | --h)
     echo "\$ac_cs_usage"; exit 0 ;;
@@ -5960,12 +5520,7 @@ s%@MAKEINFO@%$MAKEINFO%g
 s%@SET_MAKE@%$SET_MAKE%g
 s%@RANLIB@%$RANLIB%g
 s%@CC@%$CC%g
-s%@LD@%$LD%g
-s%@NM@%$NM%g
-s%@USE_SYMBOL_UNDERSCORE@%$USE_SYMBOL_UNDERSCORE%g
 s%@LN_S@%$LN_S%g
-s%@DLLTOOL@%$DLLTOOL%g
-s%@AS@%$AS%g
 s%@LIBTOOL@%$LIBTOOL%g
 s%@GDBINIT@%$GDBINIT%g
 s%@cgen_cpu_prefix@%$cgen_cpu_prefix%g
@@ -6239,5 +5794,5 @@ exit 0
 EOF
 chmod +x $CONFIG_STATUS
 rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || $SHELL $CONFIG_STATUS || exit 1
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
 
diff --git a/gas/doc/Makefile.in b/gas/doc/Makefile.in
index e9868c7..6ac93da 100644
--- a/gas/doc/Makefile.in
+++ b/gas/doc/Makefile.in
@@ -82,7 +82,6 @@ INSTOBJEXT = @INSTOBJEXT@
 INTLDEPS = @INTLDEPS@
 INTLLIBS = @INTLLIBS@
 INTLOBJS = @INTLOBJS@
-LD = @LD@
 LEX = @LEX@
 LIBTOOL = @LIBTOOL@
 LN_S = @LN_S@
@@ -90,7 +89,7 @@ MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
 MKINSTALLDIRS = @MKINSTALLDIRS@
 MSGFMT = @MSGFMT@
-NM = @NM@
+OBJDUMP = @OBJDUMP@
 OPCODES_LIB = @OPCODES_LIB@
 PACKAGE = @PACKAGE@
 POFILES = @POFILES@
@@ -98,7 +97,6 @@ POSUB = @POSUB@
 RANLIB = @RANLIB@
 USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
 USE_NLS = @USE_NLS@
-USE_SYMBOL_UNDERSCORE = @USE_SYMBOL_UNDERSCORE@
 VERSION = @VERSION@
 YACC = @YACC@
 atof = @atof@
diff --git a/gas/po/POTFILES.in b/gas/po/POTFILES.in
index 9f67f27..0e420b3 100644
--- a/gas/po/POTFILES.in
+++ b/gas/po/POTFILES.in
@@ -13,6 +13,7 @@ bit_fix.h
 cgen.h
 cond.c
 cond.c
+config/e-i386aout.c
 config/e-i386coff.c
 config/e-i386elf.c
 config/e-mipsecoff.c
@@ -49,12 +50,16 @@ config/tc-d10v.c
 config/tc-d10v.h
 config/tc-d30v.c
 config/tc-d30v.h
+config/tc-fr30.c
+config/tc-fr30.h
 config/tc-h8300.c
 config/tc-h8300.h
 config/tc-h8500.c
 config/tc-h8500.h
 config/tc-hppa.c
 config/tc-hppa.h
+config/tc-i370.c
+config/tc-i370.h
 config/tc-i386.c
 config/tc-i386.h
 config/tc-i860.c
@@ -77,6 +82,8 @@ config/tc-mn10300.c
 config/tc-mn10300.h
 config/tc-ns32k.c
 config/tc-ns32k.h
+config/tc-pj.c
+config/tc-pj.h
 config/tc-ppc.c
 config/tc-ppc.h
 config/tc-sh.c
diff --git a/gas/po/gas.pot b/gas/po/gas.pot
index ef40ee1..4d04cea 100644
--- a/gas/po/gas.pot
+++ b/gas/po/gas.pot
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 1999-06-03 03:00-0700\n"
+"POT-Creation-Date: 2000-02-27 11:37-0500\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -14,221 +14,329 @@ msgstr ""
 "Content-Type: text/plain; charset=CHARSET\n"
 "Content-Transfer-Encoding: ENCODING\n"
 
-#: app.c:448 app.c:462
+#: app.c:466 app.c:480
 msgid "end of file in comment"
 msgstr ""
 
-#: app.c:541
+#: app.c:559
 msgid "end of file in string: inserted '\"'"
 msgstr ""
 
-#: app.c:607
+#: app.c:625
 #, c-format
 msgid "Unknown escape '\\%c' in string: Ignored"
 msgstr ""
 
-#: app.c:616
+#: app.c:634
 msgid "End of file in string: '\"' inserted"
 msgstr ""
 
-#: app.c:736
+#: app.c:754
 msgid "end of file not at end of a line; newline inserted"
 msgstr ""
 
-#: app.c:882
+#: app.c:911
 msgid "end of file in multiline comment"
 msgstr ""
 
-#: app.c:931
+#: app.c:960
 msgid "end of file after a one-character quote; \\0 inserted"
 msgstr ""
 
-#: app.c:939
+#: app.c:968
 msgid "end of file in escape character"
 msgstr ""
 
-#: app.c:951
+#: app.c:980
 msgid "Missing close quote: (assumed)"
 msgstr ""
 
-#: app.c:1010 app.c:1064 app.c:1133
+#: app.c:1043 app.c:1097 app.c:1166
 msgid "end of file in comment; newline inserted"
 msgstr ""
 
-#: app.c:1074
+#: app.c:1107
 msgid "EOF in Comment: Newline inserted"
 msgstr ""
 
-#: as.c:121
+#: as.c:148
+msgid "missing emulation mode name"
+msgstr ""
+
+#: as.c:163
+#, c-format
+msgid "unrecognized emulation name `%s'"
+msgstr ""
+
+#: as.c:210
 #, c-format
 msgid "GNU assembler version %s (%s) using BFD version %s"
 msgstr ""
 
-#: as.c:124
+#: as.c:213
 #, c-format
 msgid "GNU assembler version %s (%s)"
 msgstr ""
 
-#: as.c:133
+#: as.c:222
 #, c-format
 msgid "Usage: %s [option...] [asmfile...]\n"
 msgstr ""
 
-#: as.c:135
+#: as.c:224
 msgid ""
 "Options:\n"
-"  -a[sub-option...]\tturn on listings\n"
-"    Sub-options [default hls]:\n"
-"    c   omit false conditionals\n"
-"    d   omit debugging directives\n"
-"    h   include high-level source\n"
-"    l   include assembly\n"
-"    m   include macro expansions\n"
-"    n   omit forms processing\n"
-"    s   include symbols\n"
-"    L   include line debug statistics (if applicable)\n"
-"    =file set listing file name (must be last sub-option)\n"
-msgstr ""
-
-#: as.c:149
+"  -a[sub-option...]\t  turn on listings\n"
+"                      \t  Sub-options [default hls]:\n"
+"                      \t  c      omit false conditionals\n"
+"                      \t  d      omit debugging directives\n"
+"                      \t  h      include high-level source\n"
+"                      \t  l      include assembly\n"
+"                      \t  m      include macro expansions\n"
+"                      \t  n      omit forms processing\n"
+"                      \t  s      include symbols\n"
+"                      \t  L      include line debug statistics (if "
+"applicable)\n"
+"                      \t  =FILE  list to FILE (must be last sub-option)\n"
+msgstr ""
+
+#: as.c:238
+msgid "  -D                      produce assembler debugging messages\n"
+msgstr ""
+
+#: as.c:240
+msgid "  --defsym SYM=VAL        define symbol SYM to given value\n"
+msgstr ""
+
+#: as.c:256
+#, c-format
+msgid "                          emulate output (default %s)\n"
+msgstr ""
+
+#: as.c:260
+msgid "  -f                      skip whitespace and comment preprocessing\n"
+msgstr ""
+
+#: as.c:262
+msgid "  --gstabs                generate stabs debugging information\n"
+msgstr ""
+
+#: as.c:264
+msgid "  --gdwarf2               generate DWARF2 debugging information\n"
+msgstr ""
+
+#: as.c:266
+msgid "  --help                  show this message and exit\n"
+msgstr ""
+
+#: as.c:268
+msgid ""
+"  -I DIR                  add DIR to search list for .include directives\n"
+msgstr ""
+
+#: as.c:270
+msgid "  -J                      don't warn about signed overflow\n"
+msgstr ""
+
+#: as.c:272
 msgid ""
-"  -D\t\t          produce assembler debugging messages\n"
-"  --defsym SYM=VAL        define symbol SYM to given value\n"
-"  -f\t\t          skip whitespace and comment preprocessing\n"
-"  --gstabs\t          generate stabs debugging information\n"
-"  --help\t\t  show this message and exit\n"
-"  -I DIR\t\t  add DIR to search list for .include directives\n"
-"  -J\t\t          don't warn about signed overflow\n"
-"  -K\t\t          warn when differences altered for long displacements\n"
-"  -L,--keep-locals        keep local symbols (e.g. starting with `L')\n"
-msgstr ""
-
-#: as.c:160
+"  -K                      warn when differences altered for long "
+"displacements\n"
+msgstr ""
+
+#: as.c:274
+msgid "  -L,--keep-locals        keep local symbols (e.g. starting with `L')\n"
+msgstr ""
+
+#: as.c:276
+msgid "  -M,--mri                assemble in MRI compatibility mode\n"
+msgstr ""
+
+#: as.c:278
+msgid ""
+"  --MD FILE               write dependency information in FILE (default "
+"none)\n"
+msgstr ""
+
+#: as.c:280
+msgid "  -nocpp                  ignored\n"
+msgstr ""
+
+#: as.c:282
+msgid ""
+"  -o OBJFILE              name the object-file output OBJFILE (default "
+"a.out)\n"
+msgstr ""
+
+#: as.c:284
+msgid "  -R                      fold data section into text section\n"
+msgstr ""
+
+#: as.c:286
+msgid ""
+"  --statistics            print various measured statistics from execution\n"
+msgstr ""
+
+#: as.c:288
+msgid "  --strip-local-absolute  strip local absolute symbols\n"
+msgstr ""
+
+#: as.c:290
+msgid ""
+"  --traditional-format    Use same format as native assembler when possible\n"
+msgstr ""
+
+#: as.c:292
+msgid "  --version               print assembler version number and exit\n"
+msgstr ""
+
+#: as.c:294
+msgid "  -W  --no-warn           suppress warnings\n"
+msgstr ""
+
+#: as.c:296
+msgid "  --warn                  don't suppress warnings\n"
+msgstr ""
+
+#: as.c:298
+msgid "  --fatal-warnings        treat warnings as errors\n"
+msgstr ""
+
+#: as.c:300
 msgid ""
-"  -M,--mri\t          assemble in MRI compatibility mode\n"
-"  --MD FILE\t          write dependency information in FILE (default none)\n"
-"  -nocpp\t\t  ignored\n"
-"  -o OBJFILE\t          name the object-file output OBJFILE (default a.out)\n"
-"  -R\t\t          fold data section into text section\n"
-"  --statistics\t          print various measured statistics from execution\n"
-"  --strip-local-absolute  strip local absolute symbols\n"
-"  --traditional-format\t  Use same format as native assembler when possible\n"
-"  --version\t\t  print assembler version number and exit\n"
-"  -W\t\t\t  suppress warnings\n"
-"  --itbl INSTTBL\t  extend instruction set to include instructions\n"
-"\t\t\t  matching the specifications defined in file INSTTBL\n"
-"  -w\t\t\t  ignored\n"
-"  -X\t\t\t  ignored\n"
-"  -Z\t\t\t  generate object file even after errors\n"
-msgstr ""
-
-#: as.c:177
+"  --itbl INSTTBL          extend instruction set to include instructions\n"
+"                          matching the specifications defined in file "
+"INSTTBL\n"
+msgstr ""
+
+#: as.c:303
+msgid "  -w                      ignored\n"
+msgstr ""
+
+#: as.c:305
+msgid "  -X                      ignored\n"
+msgstr ""
+
+#: as.c:307
+msgid "  -Z                      generate object file even after errors\n"
+msgstr ""
+
+#: as.c:309
 msgid ""
-"  --listing-lhs-width\t  set the width in words of the output data column "
+"  --listing-lhs-width     set the width in words of the output data column "
 "of\n"
-"\t\t\t  the listing\n"
-"  --listing-lhs-width2\t  set the width in words of the continuation lines\n"
-"\t\t\t  of the output data column; ignored if smaller than\n"
-"\t\t\t  the width of the first line\n"
-"  --listing-rhs-width\t  set the max width in characters of the lines from\n"
-"\t\t\t  the source file\n"
-"  --listing-cont-lines\t  set the maximum number of continuation lines used\n"
-"\t\t\t  for the output data column of the listing\n"
+"                          the listing\n"
 msgstr ""
 
-#: as.c:190 gasp.c:3588
+#: as.c:312
 msgid ""
-"\n"
-"Report bugs to bug-gnu-utils@gnu.org\n"
+"  --listing-lhs-width2    set the width in words of the continuation lines\n"
+"                          of the output data column; ignored if smaller "
+"than\n"
+"                          the width of the first line\n"
 msgstr ""
 
-#: as.c:227
-msgid "missing emulation mode name"
+#: as.c:316
+msgid ""
+"  --listing-rhs-width     set the max width in characters of the lines from\n"
+"                          the source file\n"
 msgstr ""
 
-#: as.c:242
-#, c-format
-msgid "unrecognized emulation name `%s'"
+#: as.c:319
+msgid ""
+"  --listing-cont-lines    set the maximum number of continuation lines used\n"
+"                          for the output data column of the listing\n"
+msgstr ""
+
+#: as.c:325 gasp.c:3589
+msgid ""
+"\n"
+"Report bugs to bug-gnu-utils@gnu.org\n"
 msgstr ""
 
 #. This output is intended to follow the GNU standards document.
-#: as.c:462
+#: as.c:515
 #, c-format
 msgid "GNU assembler %s\n"
 msgstr ""
 
-#: as.c:463
+#: as.c:516
 msgid "Copyright 1997 Free Software Foundation, Inc.\n"
 msgstr ""
 
-#: as.c:464 gasp.c:3682
+#: as.c:517 gasp.c:3683
 msgid ""
 "This program is free software; you may redistribute it under the terms of\n"
 "the GNU General Public License.  This program has absolutely no warranty.\n"
 msgstr ""
 
-#: as.c:467
+#: as.c:520
 #, c-format
 msgid "This assembler was configured for a target of `%s'.\n"
 msgstr ""
 
-#: as.c:474
+#: as.c:527
 msgid "multiple emulation names specified"
 msgstr ""
 
-#: as.c:476
+#: as.c:529
 msgid "emulations not handled in this configuration"
 msgstr ""
 
-#: as.c:481
+#: as.c:534
 #, c-format
 msgid "alias = %s\n"
 msgstr ""
 
-#: as.c:482
+#: as.c:535
 #, c-format
 msgid "canonical = %s\n"
 msgstr ""
 
-#: as.c:483
+#: as.c:536
 #, c-format
 msgid "cpu-type = %s\n"
 msgstr ""
 
-#: as.c:485
+#: as.c:538
 #, c-format
 msgid "format = %s\n"
 msgstr ""
 
-#: as.c:488
+#: as.c:541
 #, c-format
 msgid "bfd-target = %s\n"
 msgstr ""
 
-#: as.c:501
+#: as.c:554
 msgid "bad defsym; format is --defsym name=value"
 msgstr ""
 
-#: as.c:521
+#: as.c:574
 msgid "No file name following -t option\n"
 msgstr ""
 
-#: as.c:537
+#: as.c:590
 #, c-format
 msgid "Failed to read instruction table %s\n"
 msgstr ""
 
-#: as.c:641
+#: as.c:704
 #, c-format
 msgid "invalid listing option `%c'"
 msgstr ""
 
-#: as.c:863
+#: as.c:898
+#, c-format
+msgid "%d warnings, treating warnings as errors"
+msgstr ""
+
+#: as.c:929
 #, c-format
 msgid "%s: total time in assembly: %ld.%06ld\n"
 msgstr ""
 
-#: as.c:866
+#: as.c:932
 #, c-format
 msgid "%s: data size %ld\n"
 msgstr ""
@@ -239,7 +347,7 @@ msgstr ""
 #.
 #: atof-generic.c:438 config/tc-a29k.c:544 config/tc-i860.c:335
 #: config/tc-i860.c:708 config/tc-m68k.c:3124 config/tc-m68k.c:3153
-#: config/tc-sparc.c:2157
+#: config/tc-sparc.c:2452
 msgid "failed sanity check."
 msgstr ""
 
@@ -255,246 +363,272 @@ msgstr ""
 msgid "bad format for ifc or ifnc"
 msgstr ""
 
-#: cond.c:257
-msgid "\".endif\" without \".if\""
-msgstr ""
-
-#: cond.c:287
-msgid ".else without matching .if - ignored"
+#: cond.c:258
+msgid "\".elseif\" without matching \".if\" - ignored"
 msgstr ""
 
-#: cond.c:292
-msgid "duplicate \"else\" - ignored"
+#: cond.c:263
+msgid "\".elseif\" after \".else\" - ignored"
 msgstr ""
 
-#: cond.c:295
+#: cond.c:266 cond.c:375
 msgid "here is the previous \"else\""
 msgstr ""
 
-#: cond.c:298
+#: cond.c:269 cond.c:378
 msgid "here is the previous \"if\""
 msgstr ""
 
-#: cond.c:343
+#: cond.c:302
+msgid "non-constant expression in \".elseif\" statement"
+msgstr ""
+
+#: cond.c:337
+msgid "\".endif\" without \".if\""
+msgstr ""
+
+#: cond.c:367
+msgid ".else without matching .if - ignored"
+msgstr ""
+
+#: cond.c:372
+msgid "duplicate \"else\" - ignored"
+msgstr ""
+
+#: cond.c:423
 msgid ".ifeqs syntax error"
 msgstr ""
 
-#: cond.c:430
+#: cond.c:506
 msgid "end of macro inside conditional"
 msgstr ""
 
-#: cond.c:432
+#: cond.c:508
 msgid "end of file inside conditional"
 msgstr ""
 
-#: cond.c:435
+#: cond.c:511
 msgid "here is the start of the unterminated conditional"
 msgstr ""
 
-#: cond.c:439
+#: cond.c:515
 msgid "here is the \"else\" of the unterminated conditional"
 msgstr ""
 
-#: config/obj-aout.c:161
+#: config/obj-aout.c:163
 #, c-format
 msgid "Attempt to put a common symbol into set %s"
 msgstr ""
 
-#: config/obj-aout.c:165
+#: config/obj-aout.c:167
 #, c-format
 msgid "Attempt to put an undefined symbol into set %s"
 msgstr ""
 
-#: config/obj-aout.c:196 config/obj-elf.c:1540 ecoff.c:3667
+#: config/obj-aout.c:198 config/obj-coff.c:1204 config/obj-elf.c:1675
+#: ecoff.c:3668
 #, c-format
 msgid "Symbol `%s' can not be both weak and common"
 msgstr ""
 
-#: config/obj-aout.c:254 config/obj-coff.c:1770
+#: config/obj-aout.c:256 config/obj-coff.c:1916
 msgid "unresolved relocation"
 msgstr ""
 
-#: config/obj-aout.c:256 config/obj-coff.c:1772
+#: config/obj-aout.c:258 config/obj-coff.c:1918
 #, c-format
 msgid "bad relocation: symbol `%s' not in symbol table"
 msgstr ""
 
-#: config/obj-aout.c:343
+#: config/obj-aout.c:345
 #, c-format
 msgid "%s: bad type for weak symbol"
 msgstr ""
 
-#: config/obj-aout.c:457 config/obj-coff.c:2704 write.c:1801
+#: config/obj-aout.c:462 config/obj-coff.c:2849 write.c:1805
 #, c-format
 msgid "%s: global symbols not supported in common sections"
 msgstr ""
 
-#: config/obj-aout.c:524
+#: config/obj-aout.c:529
 #, c-format
 msgid "Local symbol %s never defined."
 msgstr ""
 
-#: config/obj-aout.c:612
+#: config/obj-aout.c:617
 msgid "subsegment index too high"
 msgstr ""
 
-#: config/obj-bout.c:312 config/obj-vms.c:566
+#: config/obj-bout.c:313 config/obj-vms.c:566
 #, c-format
 msgid "Local symbol %s never defined"
 msgstr ""
 
-#: config/obj-coff.c:133
+#: config/obj-coff.c:149
 #, c-format
 msgid "Inserting \"%s\" into structure table failed: %s"
 msgstr ""
 
-#: config/obj-coff.c:453 config/obj-coff.c:2117
+#. Zero is used as an end marker in the file.
+#: config/obj-coff.c:444
+msgid "Line numbers must be positive integers\n"
+msgstr ""
+
+#: config/obj-coff.c:477 config/obj-coff.c:2263
 msgid ".ln pseudo-op inside .def/.endef: ignored."
 msgstr ""
 
-#: config/obj-coff.c:513 config/obj-coff.c:2174
+#: config/obj-coff.c:520 ecoff.c:3304
+msgid ".loc outside of .text"
+msgstr ""
+
+#: config/obj-coff.c:527
+msgid ".loc pseudo-op inside .def/.endef: ignored."
+msgstr ""
+
+#: config/obj-coff.c:615 config/obj-coff.c:2320
 msgid ".def pseudo-op used inside of .def/.endef: ignored."
 msgstr ""
 
-#: config/obj-coff.c:559 config/obj-coff.c:2227
+#: config/obj-coff.c:661 config/obj-coff.c:2373
 msgid ".endef pseudo-op used outside of .def/.endef: ignored."
 msgstr ""
 
-#: config/obj-coff.c:593
+#: config/obj-coff.c:699
 #, c-format
 msgid "`%s' symbol without preceding function"
 msgstr ""
 
-#: config/obj-coff.c:635 config/obj-coff.c:2302
+#: config/obj-coff.c:753 config/obj-coff.c:2448
 #, c-format
 msgid "unexpected storage class %d"
 msgstr ""
 
-#: config/obj-coff.c:737 config/obj-coff.c:2409
+#: config/obj-coff.c:866 config/obj-coff.c:2555
 msgid ".dim pseudo-op used outside of .def/.endef: ignored."
 msgstr ""
 
-#: config/obj-coff.c:757 config/obj-coff.c:2429
+#: config/obj-coff.c:886 config/obj-coff.c:2575
 msgid "badly formed .dim directive ignored"
 msgstr ""
 
-#: config/obj-coff.c:808 config/obj-coff.c:2492
+#: config/obj-coff.c:937 config/obj-coff.c:2638
 msgid ".size pseudo-op used outside of .def/.endef ignored."
 msgstr ""
 
-#: config/obj-coff.c:824 config/obj-coff.c:2508
+#: config/obj-coff.c:953 config/obj-coff.c:2654
 msgid ".scl pseudo-op used outside of .def/.endef ignored."
 msgstr ""
 
-#: config/obj-coff.c:842 config/obj-coff.c:2526
+#: config/obj-coff.c:971 config/obj-coff.c:2672
 msgid ".tag pseudo-op used outside of .def/.endef ignored."
 msgstr ""
 
-#: config/obj-coff.c:861 config/obj-coff.c:2544
+#: config/obj-coff.c:990 config/obj-coff.c:2690
 #, c-format
 msgid "tag not found for .tag %s"
 msgstr ""
 
-#: config/obj-coff.c:876 config/obj-coff.c:2559
+#: config/obj-coff.c:1005 config/obj-coff.c:2705
 msgid ".type pseudo-op used outside of .def/.endef ignored."
 msgstr ""
 
-#: config/obj-coff.c:898 config/obj-coff.c:2581
+#: config/obj-coff.c:1027 config/obj-coff.c:2727
 msgid ".val pseudo-op used outside of .def/.endef ignored."
 msgstr ""
 
-#: config/obj-coff.c:1029 config/obj-coff.c:2777
+#: config/obj-coff.c:1165 config/obj-coff.c:2922
 msgid "mismatched .eb"
 msgstr ""
 
-#: config/obj-coff.c:1048 config/obj-coff.c:2817
+#: config/obj-coff.c:1183 config/obj-coff.c:2962
 msgid "C_EFCN symbol out of scope"
 msgstr ""
 
 #. STYP_INFO
 #. STYP_LIB
 #. STYP_OVER
-#: config/obj-coff.c:1257
+#: config/obj-coff.c:1405
 #, c-format
 msgid "unsupported section attribute '%c'"
 msgstr ""
 
-#: config/obj-coff.c:1262 config/obj-coff.c:3520 config/tc-ppc.c:3784
+#: config/obj-coff.c:1410 config/obj-coff.c:3668 config/tc-ppc.c:3791
 #, c-format
 msgid "unknown section attribute '%c'"
 msgstr ""
 
-#: config/obj-coff.c:1284 config/tc-ppc.c:3802 read.c:2499
+#: config/obj-coff.c:1432 config/tc-ppc.c:3809 read.c:2495
 #, c-format
 msgid "error setting flags for \"%s\": %s"
 msgstr ""
 
-#: config/obj-coff.c:1403
+#: config/obj-coff.c:1558
 #, c-format
 msgid "0x%lx: \"%s\" type = %ld, class = %d, segment = %d\n"
 msgstr ""
 
-#: config/obj-coff.c:1597 config/obj-ieee.c:69
+#: config/obj-coff.c:1743 config/obj-ieee.c:69
 msgid "Out of step\n"
 msgstr ""
 
-#: config/obj-coff.c:2032
+#: config/obj-coff.c:2178
 msgid "bfd_coff_swap_scnhdr_out failed"
 msgstr ""
 
-#: config/obj-coff.c:2259
+#: config/obj-coff.c:2405
 msgid "`.bf' symbol without preceding function\n"
 msgstr ""
 
-#: config/obj-coff.c:3220 config/obj-ieee.c:522 output-file.c:52
+#: config/obj-coff.c:3365 config/obj-ieee.c:522 output-file.c:52
 #: output-file.c:119
 #, c-format
 msgid "FATAL: Can't create %s"
 msgstr ""
 
-#: config/obj-coff.c:3394
+#: config/obj-coff.c:3542
 #, c-format
 msgid "Can't close %s: %s"
 msgstr ""
 
-#: config/obj-coff.c:3428
+#: config/obj-coff.c:3576
 #, c-format
 msgid "Too many new sections; can't add \"%s\""
 msgstr ""
 
-#: config/obj-coff.c:3838 config/tc-m88k.c:1260 config/tc-sparc.c:3016
+#: config/obj-coff.c:3986 config/tc-m88k.c:1260 config/tc-sparc.c:3344
 msgid "Expected comma after name"
 msgstr ""
 
-#: config/obj-coff.c:3844 read.c:1955
+#: config/obj-coff.c:3992 read.c:1948
 msgid "Missing size expression"
 msgstr ""
 
-#: config/obj-coff.c:3850
+#: config/obj-coff.c:3998
 #, c-format
 msgid "lcomm length (%d.) <0! Ignored."
 msgstr ""
 
-#: config/obj-coff.c:3878 read.c:2181
+#: config/obj-coff.c:4026 read.c:2179
 #, c-format
 msgid "Symbol %s already defined"
 msgstr ""
 
-#: config/obj-coff.c:3972 config/tc-i960.c:3274
+#: config/obj-coff.c:4120 config/tc-i960.c:3255
 #, c-format
 msgid "No 'bal' entry point for leafproc %s"
 msgstr ""
 
-#: config/obj-coff.c:4051 write.c:2495
+#: config/obj-coff.c:4199 write.c:2507
 #, c-format
 msgid "Negative of non-absolute symbol %s"
 msgstr ""
 
-#: config/obj-coff.c:4072 write.c:2509
+#: config/obj-coff.c:4220 write.c:2521
 msgid "callj to difference of 2 symbols"
 msgstr ""
 
-#: config/obj-coff.c:4118
+#: config/obj-coff.c:4266
 #, c-format
 msgid "Can't emit reloc {- %s-seg symbol \"%s\"} @ file address %ld."
 msgstr ""
@@ -502,150 +636,154 @@ msgstr ""
 #. This is a COBR instruction.  They have only a 13-bit
 #. displacement and are only to be used for local branches:
 #. flag as error, don't generate relocation.
-#: config/obj-coff.c:4208 config/tc-i960.c:3294 write.c:2653
+#: config/obj-coff.c:4356 config/tc-i960.c:3275 write.c:2665
 msgid "can't use COBR format with external label"
 msgstr ""
 
-#: config/obj-coff.c:4288
+#: config/obj-coff.c:4436
 #, c-format
 msgid "Value of %ld too large for field of %d bytes at 0x%lx"
 msgstr ""
 
-#: config/obj-coff.c:4302 write.c:2762
+#: config/obj-coff.c:4450 write.c:2764
 #, c-format
 msgid "Signed .word overflow; switch may be too large; %ld at 0x%lx"
 msgstr ""
 
-#: config/obj-ecoff.c:239
+#: config/obj-ecoff.c:240
 msgid "Can't set GP value"
 msgstr ""
 
-#: config/obj-ecoff.c:246
+#: config/obj-ecoff.c:247
 msgid "Can't set register masks"
 msgstr ""
 
-#: config/obj-elf.c:276 config/tc-sparc.c:3157 config/tc-v850.c:263
+#: config/obj-elf.c:299 config/tc-sparc.c:3485 config/tc-v850.c:263
 msgid "Expected comma after symbol-name"
 msgstr ""
 
-#: config/obj-elf.c:283 config/tc-arc.c:778 config/tc-sparc.c:3164
+#: config/obj-elf.c:306 config/tc-arc.c:779 config/tc-sparc.c:3492
 #, c-format
 msgid ".COMMon length (%d.) <0! Ignored."
 msgstr ""
 
-#: config/obj-elf.c:293 config/tc-alpha.c:3430 config/tc-sparc.c:3174
+#: config/obj-elf.c:316 config/tc-alpha.c:4320 config/tc-sparc.c:3502
 #: config/tc-v850.c:285
 msgid "Ignoring attempt to re-define symbol"
 msgstr ""
 
-#: config/obj-elf.c:301 config/tc-arc.c:796 config/tc-sparc.c:3182
+#: config/obj-elf.c:324 config/tc-arc.c:797 config/tc-sparc.c:3510
 #: config/tc-v850.c:295
 #, c-format
 msgid "Length of .comm \"%s\" is already %ld. Not changed to %d."
 msgstr ""
 
-#: config/obj-elf.c:324 config/tc-arc.c:815 config/tc-v850.c:322
+#: config/obj-elf.c:347 config/tc-arc.c:816 config/tc-v850.c:322
 msgid "Common alignment negative; 0 assumed"
 msgstr ""
 
-#: config/obj-elf.c:343 config/tc-m32r.c:664 config/tc-ppc.c:1395
+#: config/obj-elf.c:366 config/tc-m32r.c:1262 config/tc-ppc.c:1396
 #: config/tc-v850.c:385
 msgid "Common alignment not a power of 2"
 msgstr ""
 
-#: config/obj-elf.c:406 config/tc-arc.c:875 config/tc-sparc.c:3306
+#: config/obj-elf.c:429 config/tc-arc.c:876 config/tc-sparc.c:3634
 #: config/tc-v850.c:563
 #, c-format
 msgid "bad .common segment %s"
 msgstr ""
 
-#: config/obj-elf.c:591
-msgid "Missing section name"
+#: config/obj-elf.c:658
+#, c-format
+msgid "Setting incorrect section type for %s"
 msgstr ""
 
-#: config/obj-elf.c:656
-msgid "Bad .section directive: want a,w,x in string"
+#: config/obj-elf.c:668
+#, c-format
+msgid "Setting incorrect section attributes for %s"
 msgstr ""
 
-#: config/obj-elf.c:705
-msgid "Unrecognized section type"
+#: config/obj-elf.c:726
+msgid "Unrecognized .section attribute: want a,w,x"
 msgstr ""
 
-#: config/obj-elf.c:719
-msgid "Bad .section directive - character following name is not '#'"
+#: config/obj-elf.c:766
+msgid "Unrecognized section attribute"
 msgstr ""
 
-#: config/obj-elf.c:751
-msgid "Unrecognized section attribute"
+#: config/obj-elf.c:788
+msgid "Unrecognized section type"
 msgstr ""
 
-#: config/obj-elf.c:772
-#, c-format
-msgid "Setting incorrect section type for %s"
+#: config/obj-elf.c:839
+msgid "Missing section name"
 msgstr ""
 
-#: config/obj-elf.c:782
-#, c-format
-msgid "Setting incorrect section attributes for %s"
+#: config/obj-elf.c:905
+msgid "Bad .section directive - character following name is not '#'"
 msgstr ""
 
-#: config/obj-elf.c:907
+#: config/obj-elf.c:1006
 msgid ".previous without corresponding .section; ignored"
 msgstr ""
 
-#: config/obj-elf.c:956
+#: config/obj-elf.c:1033
+msgid ".popsection without corresponding .pushsection; ignored"
+msgstr ""
+
+#: config/obj-elf.c:1085
 #, c-format
 msgid "multiple .symver directives for symbol `%s'"
 msgstr ""
 
-#: config/obj-elf.c:965
+#: config/obj-elf.c:1094
 msgid "expected comma after name in .symver"
 msgstr ""
 
-#: config/obj-elf.c:986
+#: config/obj-elf.c:1115
 #, c-format
 msgid "missing version name in `%s' for symbol `%s'"
 msgstr ""
 
-#: config/obj-elf.c:1193 config/obj-som.c:148 config/obj-som.c:193
+#: config/obj-elf.c:1324 config/obj-som.c:148 config/obj-som.c:193
 msgid "Expected quoted string"
 msgstr ""
 
-#: config/obj-elf.c:1214
+#: config/obj-elf.c:1345
 #, c-format
 msgid "expected comma after name `%s' in .size directive"
 msgstr ""
 
-#: config/obj-elf.c:1223
+#: config/obj-elf.c:1354
 msgid "missing expression in .size directive"
 msgstr ""
 
-#: config/obj-elf.c:1290
+#: config/obj-elf.c:1421
 #, c-format
 msgid "ignoring unrecognized symbol type \"%s\""
 msgstr ""
 
-#: config/obj-elf.c:1464
+#: config/obj-elf.c:1599
 msgid ".size expression too complicated to fix up"
 msgstr ""
 
-#: config/obj-elf.c:1495
+#: config/obj-elf.c:1630
 #, c-format
 msgid ""
 "invalid attempt to declare external version name as default in symbol `%s'"
 msgstr ""
 
-#: config/obj-elf.c:1625
+#: config/obj-elf.c:1760
 #, c-format
 msgid "Failed to set up debugging information: %s"
 msgstr ""
 
-#: config/obj-elf.c:1641
+#: config/obj-elf.c:1780
 #, c-format
 msgid "Can't start writing .mdebug section: %s"
 msgstr ""
 
-#: config/obj-elf.c:1649
+#: config/obj-elf.c:1788
 #, c-format
 msgid "Could not write .mdebug section: %s"
 msgstr ""
@@ -818,26 +956,26 @@ msgstr ""
 msgid "unhandled stab type %d"
 msgstr ""
 
-#: config/tc-a29k.c:160 config/tc-sparc.c:3358
+#: config/tc-a29k.c:160 config/tc-sparc.c:3686
 msgid "Unknown segment type"
 msgstr ""
 
 #. Probably a memory allocation problem?  Give up now.
-#: config/tc-a29k.c:330 config/tc-hppa.c:1336 config/tc-i860.c:202
-#: config/tc-mips.c:1016 config/tc-mips.c:1058 config/tc-sparc.c:715
+#: config/tc-a29k.c:330 config/tc-hppa.c:1387 config/tc-i860.c:202
+#: config/tc-mips.c:1062 config/tc-mips.c:1104 config/tc-sparc.c:779
 msgid "Broken assembler.  No assembly attempted."
 msgstr ""
 
-#: config/tc-a29k.c:375 config/tc-arc.c:534 config/tc-d10v.c:481
-#: config/tc-d30v.c:540 config/tc-h8300.c:305 config/tc-h8500.c:297
-#: config/tc-mcore.c:509 config/tc-mn10200.c:936 config/tc-mn10300.c:992
-#: config/tc-ppc.c:1850 config/tc-sh.c:478 config/tc-tic80.c:291
+#: config/tc-a29k.c:375 config/tc-arc.c:535 config/tc-d10v.c:507
+#: config/tc-d30v.c:553 config/tc-h8300.c:305 config/tc-h8500.c:297
+#: config/tc-mcore.c:656 config/tc-mn10200.c:935 config/tc-mn10300.c:1294
+#: config/tc-ppc.c:1852 config/tc-sh.c:628 config/tc-tic80.c:291
 #: config/tc-v850.c:2033 config/tc-w65.c:257 config/tc-z8k.c:341
 msgid "missing operand"
 msgstr ""
 
-#: config/tc-a29k.c:415 config/tc-hppa.c:1450 config/tc-i860.c:407
-#: config/tc-i860.c:423 config/tc-sparc.c:1191 config/tc-sparc.c:1197
+#: config/tc-a29k.c:415 config/tc-hppa.c:1533 config/tc-i860.c:407
+#: config/tc-i860.c:423 config/tc-sparc.c:1342 config/tc-sparc.c:1348
 #, c-format
 msgid "Unknown opcode: `%s'"
 msgstr ""
@@ -888,33 +1026,33 @@ msgstr ""
 msgid "Invalid register in & expression"
 msgstr ""
 
-#: config/tc-alpha.c:722
+#: config/tc-alpha.c:834
 #, c-format
 msgid "internal error: can't hash opcode `%s': %s"
 msgstr ""
 
-#: config/tc-alpha.c:756
+#: config/tc-alpha.c:868
 #, c-format
 msgid "internal error: can't hash macro `%s': %s"
 msgstr ""
 
-#: config/tc-alpha.c:832 config/tc-i960.c:2736
+#: config/tc-alpha.c:951 config/tc-i960.c:2738
 msgid "syntax error"
 msgstr ""
 
-#: config/tc-alpha.c:905 config/tc-arm.c:4982 config/tc-h8300.c:1413
-#: config/tc-h8500.c:1222 config/tc-hppa.c:2684 config/tc-i860.c:813
-#: config/tc-m68k.c:4125 config/tc-m88k.c:1106 config/tc-ns32k.c:1588
-#: config/tc-sparc.c:2433 config/tc-z8k.c:1355
+#: config/tc-alpha.c:1025 config/tc-arm.c:5169 config/tc-h8300.c:1413
+#: config/tc-h8500.c:1222 config/tc-hppa.c:3904 config/tc-i860.c:813
+#: config/tc-m68k.c:4125 config/tc-m88k.c:1106 config/tc-ns32k.c:1589
+#: config/tc-sparc.c:2731 config/tc-z8k.c:1355
 msgid "Bad call to MD_ATOF()"
 msgstr ""
 
-#: config/tc-alpha.c:955
+#: config/tc-alpha.c:1075
 #, c-format
 msgid "Unknown CPU identifier `%s'"
 msgstr ""
 
-#: config/tc-alpha.c:999
+#: config/tc-alpha.c:1119
 msgid ""
 "Alpha options:\n"
 "-32addr\t\t\ttreat addresses as 32-bit values\n"
@@ -925,886 +1063,970 @@ msgid ""
 "\t\t\tthese variants include PALcode opcodes\n"
 msgstr ""
 
-#: config/tc-alpha.c:1009
+#: config/tc-alpha.c:1129
 msgid ""
 "VMS options:\n"
 "-+\t\t\thash encode (don't truncate) names longer than 64 characters\n"
 "-H\t\t\tshow new symbol after hash truncation\n"
 msgstr ""
 
-#: config/tc-alpha.c:1165
+#: config/tc-alpha.c:1298
 #, c-format
 msgid "unhandled relocation type %s"
 msgstr ""
 
-#: config/tc-alpha.c:1178
+#: config/tc-alpha.c:1311
 msgid "non-absolute expression in constant field"
 msgstr ""
 
-#: config/tc-alpha.c:1192
+#: config/tc-alpha.c:1325
 #, c-format
 msgid "type %d reloc done?\n"
 msgstr ""
 
-#: config/tc-alpha.c:1243 config/tc-alpha.c:1250 config/tc-mips.c:7329
+#: config/tc-alpha.c:1376 config/tc-alpha.c:1383 config/tc-mips.c:7362
 msgid "Used $at without \".set noat\""
 msgstr ""
 
-#: config/tc-alpha.c:1408
+#: config/tc-alpha.c:1561
 #, c-format
 msgid "cannot represent `%s' relocation in object file"
 msgstr ""
 
-#: config/tc-alpha.c:1415
+#: config/tc-alpha.c:1568
 #, c-format
 msgid "internal error? cannot generate `%s' relocation"
 msgstr ""
 
-#: config/tc-alpha.c:1469
+#: config/tc-alpha.c:1622
 #, c-format
 msgid "frame reg expected, using $%d."
 msgstr ""
 
-#: config/tc-alpha.c:1794
+#: config/tc-alpha.c:1747
+#, c-format
+msgid "No !literal!%d was found"
+msgstr ""
+
+#. only support one relocation op per insn
+#: config/tc-alpha.c:1935
+msgid "More than one relocation op per insn"
+msgstr ""
+
+#: config/tc-alpha.c:1952
+msgid "No relocation operand"
+msgstr ""
+
+#: config/tc-alpha.c:1958
+#, c-format
+msgid "No !sequence-number after !%s"
+msgstr ""
+
+#: config/tc-alpha.c:1971
+#, c-format
+msgid "Unknown relocation operand: !%s"
+msgstr ""
+
+#: config/tc-alpha.c:1984
+#, c-format
+msgid "Bad sequence number: !%s!%s"
+msgstr ""
+
+#: config/tc-alpha.c:2335
 #, c-format
 msgid "operand out of range (%s not between %d and %d)"
 msgstr ""
 
-#: config/tc-alpha.c:1891 config/tc-arc.c:547 config/tc-d10v.c:570
-#: config/tc-d30v.c:623 config/tc-mn10200.c:991 config/tc-mn10300.c:1058
-#: config/tc-ppc.c:1816 config/tc-ppc.c:1923 config/tc-ppc.c:1935
+#: config/tc-alpha.c:2434 config/tc-arc.c:548 config/tc-d10v.c:596
+#: config/tc-d30v.c:636 config/tc-mn10200.c:990 config/tc-mn10300.c:1365
+#: config/tc-ppc.c:1818 config/tc-ppc.c:1926 config/tc-ppc.c:1938
 #: config/tc-v850.c:1819 config/tc-v850.c:1842 config/tc-v850.c:2055
 msgid "too many fixups"
 msgstr ""
 
-#: config/tc-alpha.c:2016 config/tc-alpha.c:2074
+#: config/tc-alpha.c:2645 config/tc-alpha.c:2714
 #, c-format
 msgid "inappropriate arguments for opcode `%s'"
 msgstr ""
 
-#: config/tc-alpha.c:2018 config/tc-alpha.c:2076
+#: config/tc-alpha.c:2647 config/tc-alpha.c:2716
 #, c-format
 msgid "opcode `%s' not supported for target %s"
 msgstr ""
 
-#: config/tc-alpha.c:2022 config/tc-alpha.c:2079
+#: config/tc-alpha.c:2651 config/tc-alpha.c:2719
 #, c-format
 msgid "unknown opcode `%s'"
 msgstr ""
 
-#: config/tc-alpha.c:2131
+#: config/tc-alpha.c:2691 config/tc-alpha.c:2758 config/tc-alpha.c:3269
+#: config/tc-alpha.c:3329 config/tc-alpha.c:3381 config/tc-alpha.c:3456
+#: config/tc-alpha.c:3541 config/tc-alpha.c:3667 config/tc-alpha.c:3844
+#: config/tc-alpha.c:3901 config/tc-alpha.c:4011 config/tc-alpha.c:4118
+#: config/tc-alpha.c:4195
+#, c-format
+msgid "Cannot use !%s!%d with %s"
+msgstr ""
+
+#: config/tc-alpha.c:2779
 msgid "can not resolve expression"
 msgstr ""
 
-#: config/tc-alpha.c:2269 config/tc-alpha.c:2446
+#: config/tc-alpha.c:2921 config/tc-alpha.c:3113
 msgid "overflow in literal (.lita) table"
 msgstr ""
 
-#: config/tc-alpha.c:2276 config/tc-alpha.c:2298 config/tc-alpha.c:2459
-#: config/tc-alpha.c:2681 config/tc-alpha.c:2728 config/tc-alpha.c:2776
-#: config/tc-alpha.c:2865 config/tc-alpha.c:3066 config/tc-alpha.c:3167
+#: config/tc-alpha.c:2928 config/tc-alpha.c:2951 config/tc-alpha.c:3126
+#: config/tc-alpha.c:3470 config/tc-alpha.c:3548 config/tc-alpha.c:3596
+#: config/tc-alpha.c:3696 config/tc-alpha.c:3921 config/tc-alpha.c:4033
 msgid "macro requires $at register while noat in effect"
 msgstr ""
 
-#: config/tc-alpha.c:2278 config/tc-alpha.c:2300 config/tc-alpha.c:2461
+#: config/tc-alpha.c:2930 config/tc-alpha.c:2953 config/tc-alpha.c:3128
 msgid "macro requires $at while $at in use"
 msgstr ""
 
-#: config/tc-alpha.c:2408 expr.c:86 read.c:3125
+#: config/tc-alpha.c:3075 expr.c:86 read.c:3151
 msgid "bignum invalid; zero assumed"
 msgstr ""
 
-#: config/tc-alpha.c:2410 expr.c:88 read.c:3127 read.c:3457 read.c:4353
+#: config/tc-alpha.c:3077 expr.c:88 read.c:3153 read.c:3489 read.c:4387
 msgid "floating point number invalid; zero assumed"
 msgstr ""
 
-#: config/tc-alpha.c:2415
+#: config/tc-alpha.c:3082
 msgid "can't handle expression"
 msgstr ""
 
-#: config/tc-alpha.c:2452
+#: config/tc-alpha.c:3119
 msgid "overflow in literal (.lit8) table"
 msgstr ""
 
-#: config/tc-alpha.c:3401 config/tc-ppc.c:1344 config/tc-ppc.c:3548
-#: read.c:1377
+#: config/tc-alpha.c:3291
+#, c-format
+msgid "bad instruction format for lda !%s!%d"
+msgstr ""
+
+#: config/tc-alpha.c:4291 config/tc-ppc.c:1345 config/tc-ppc.c:3555
+#: read.c:1368
 #, c-format
 msgid ".COMMon length (%ld.) <0! Ignored."
 msgstr ""
 
-#: config/tc-alpha.c:3439 config/tc-alpha.c:3448 config/tc-ppc.c:3585
-#: read.c:1398
+#: config/tc-alpha.c:4329 config/tc-alpha.c:4338 config/tc-ppc.c:3592
+#: read.c:1389
 #, c-format
 msgid "Length of .comm \"%s\" is already %ld. Not changed to %ld."
 msgstr ""
 
-#: config/tc-alpha.c:3550 ecoff.c:3108
+#: config/tc-alpha.c:4440 ecoff.c:3109
 msgid ".ent directive has no name"
 msgstr ""
 
-#: config/tc-alpha.c:3558
+#: config/tc-alpha.c:4448
 msgid "nested .ent directives"
 msgstr ""
 
-#: config/tc-alpha.c:3594 ecoff.c:3056
+#: config/tc-alpha.c:4484 ecoff.c:3057
 msgid ".end directive has no name"
 msgstr ""
 
-#: config/tc-alpha.c:3603
+#: config/tc-alpha.c:4493
 msgid ".end directive names different symbol than .ent"
 msgstr ""
 
-#: config/tc-alpha.c:3678
+#: config/tc-alpha.c:4568
 #, c-format
 msgid "Invalid argument %d to .prologue."
 msgstr ""
 
-#: config/tc-alpha.c:3706
+#: config/tc-alpha.c:4596
 msgid "ECOFF debugging is disabled."
 msgstr ""
 
-#: config/tc-alpha.c:3727
+#: config/tc-alpha.c:4617
 msgid "Unknown section directive"
 msgstr ""
 
-#: config/tc-alpha.c:3764
+#: config/tc-alpha.c:4654
 msgid ".ent directive has no symbol"
 msgstr ""
 
-#: config/tc-alpha.c:3792
+#: config/tc-alpha.c:4682
 msgid "Bad .frame directive 1./2. param"
 msgstr ""
 
-#: config/tc-alpha.c:3804
+#: config/tc-alpha.c:4694
 msgid "Bad .frame directive 3./4. param"
 msgstr ""
 
-#: config/tc-alpha.c:3829
+#: config/tc-alpha.c:4719
 msgid ".pdesc directive not in link (.link) section"
 msgstr ""
 
-#: config/tc-alpha.c:3837
+#: config/tc-alpha.c:4727
 msgid ".pdesc has no matching .ent"
 msgstr ""
 
-#: config/tc-alpha.c:3847
+#: config/tc-alpha.c:4738
 msgid ".pdesc directive has no entry symbol"
 msgstr ""
 
-#: config/tc-alpha.c:3859
+#: config/tc-alpha.c:4751
 msgid "No comma after .pdesc <entryname>"
 msgstr ""
 
-#: config/tc-alpha.c:3882
+#: config/tc-alpha.c:4774
 msgid "unknown procedure kind"
 msgstr ""
 
-#: config/tc-alpha.c:3977
+#: config/tc-alpha.c:4869
 msgid ".name directive not in link (.link) section"
 msgstr ""
 
-#: config/tc-alpha.c:3985
+#: config/tc-alpha.c:4877
 msgid ".name directive has no symbol"
 msgstr ""
 
-#: config/tc-alpha.c:4020
+#: config/tc-alpha.c:4912
 msgid "No symbol after .linkage"
 msgstr ""
 
-#: config/tc-alpha.c:4049
+#: config/tc-alpha.c:4941
 msgid "No symbol after .code_address"
 msgstr ""
 
-#: config/tc-alpha.c:4084 ecoff.c:3273
+#: config/tc-alpha.c:4976 ecoff.c:3274
 msgid "Bad .mask directive"
 msgstr ""
 
-#: config/tc-alpha.c:4106 ecoff.c:3204
+#: config/tc-alpha.c:4998 ecoff.c:3205
 msgid "Bad .fmask directive"
 msgstr ""
 
-#: config/tc-alpha.c:4277 read.c:2144 read.c:2696 stabs.c:460
+#: config/tc-alpha.c:5169 config/tc-arm.c:1328 read.c:2142 read.c:2722
+#: stabs.c:460
 #, c-format
 msgid "Expected comma after name \"%s\""
 msgstr ""
 
-#. symbolP->sy_other = (signed char) temp;
-#: config/tc-alpha.c:4288
+#. *symbol_get_obj (symbolP) = (signed char) temp;
+#: config/tc-alpha.c:5180
 #, c-format
 msgid "unhandled: .proc %s,%d"
 msgstr ""
 
-#: config/tc-alpha.c:4323
+#: config/tc-alpha.c:5215
 #, c-format
 msgid "Tried to .set unrecognized mode `%s'"
 msgstr ""
 
 #. not fatal, but it might not work in the end
-#: config/tc-alpha.c:4340
+#: config/tc-alpha.c:5232
 msgid "File overrides no-base-register option."
 msgstr ""
 
-#: config/tc-alpha.c:4357
+#: config/tc-alpha.c:5249
 #, c-format
 msgid "Bad base register, using $%d."
 msgstr ""
 
-#: config/tc-alpha.c:4379
+#: config/tc-alpha.c:5271
 #, c-format
 msgid "Alignment too large: %d. assumed"
 msgstr ""
 
-#: config/tc-alpha.c:4383 config/tc-d30v.c:2163
+#: config/tc-alpha.c:5275 config/tc-d30v.c:2182
 msgid "Alignment negative: 0 assumed"
 msgstr ""
 
-#: config/tc-alpha.c:4696
+#: config/tc-alpha.c:5588
 #, c-format
 msgid "Chose GP value of %lx\n"
 msgstr ""
 
-#: config/tc-arc.c:136
+#: config/tc-arc.c:137
 msgid ""
 "ARC options:\n"
 "-EB\t\t\tgenerate big endian output\n"
 "-EL\t\t\tgenerate little endian output\n"
 msgstr ""
 
-#: config/tc-arc.c:154 config/tc-arc.c:177 config/tc-arc.c:921
-#: config/tc-hppa.c:1298 config/tc-hppa.c:5054 config/tc-hppa.c:5060
-#: config/tc-hppa.c:5066 config/tc-mn10300.c:721 config/tc-mn10300.c:1646
+#: config/tc-arc.c:155 config/tc-arc.c:178 config/tc-arc.c:922
+#: config/tc-hppa.c:1347 config/tc-hppa.c:6734 config/tc-hppa.c:6740
+#: config/tc-hppa.c:6746 config/tc-hppa.c:6752 config/tc-mn10300.c:883
+#: config/tc-mn10300.c:1993
 msgid "could not set architecture and machine"
 msgstr ""
 
-#: config/tc-arc.c:174
+#: config/tc-arc.c:175
 msgid "virtual memory exhausted"
 msgstr ""
 
-#: config/tc-arc.c:253 config/tc-mn10200.c:1354 config/tc-mn10300.c:1565
-#: config/tc-ppc.c:1101 config/tc-v850.c:1618
+#: config/tc-arc.c:254 config/tc-mn10200.c:1354 config/tc-mn10300.c:1904
+#: config/tc-ppc.c:1102 config/tc-v850.c:1618
 #, c-format
 msgid "operand out of range (%s not between %ld and %ld)"
 msgstr ""
 
-#: config/tc-arc.c:388
+#: config/tc-arc.c:389
 #, c-format
 msgid "unknown syntax format character `%c'"
 msgstr ""
 
-#: config/tc-arc.c:487
+#: config/tc-arc.c:488
 msgid "too many suffixes"
 msgstr ""
 
-#: config/tc-arc.c:532 config/tc-d10v.c:479 config/tc-d30v.c:538
-#: config/tc-mn10200.c:933 config/tc-mn10300.c:989 config/tc-ppc.c:1848
+#: config/tc-arc.c:533 config/tc-d10v.c:505 config/tc-d30v.c:551
+#: config/tc-mn10200.c:932 config/tc-mn10300.c:1291 config/tc-ppc.c:1850
 #: config/tc-tic80.c:287 config/tc-v850.c:2030
 msgid "illegal operand"
 msgstr ""
 
-#: config/tc-arc.c:619 config/tc-mn10200.c:1032 config/tc-mn10300.c:1128
-#: config/tc-ppc.c:1972 config/tc-v850.c:2108
+#: config/tc-arc.c:620 config/tc-mn10200.c:1031 config/tc-mn10300.c:1435
+#: config/tc-ppc.c:1975 config/tc-v850.c:2108
 #, c-format
 msgid "junk at end of line: `%s'"
 msgstr ""
 
-#: config/tc-arc.c:659
+#: config/tc-arc.c:660
 msgid "8 byte instruction in delay slot"
 msgstr ""
 
-#: config/tc-arc.c:661
+#: config/tc-arc.c:662
 msgid "8 byte jump instruction with delay slot"
 msgstr ""
 
-#: config/tc-arc.c:669
+#: config/tc-arc.c:670
 msgid "conditional branch follows set of flags"
 msgstr ""
 
-#: config/tc-arc.c:748 config/tc-arm.c:6039
+#: config/tc-arc.c:749 config/tc-arm.c:6329
 #, c-format
 msgid "bad instruction `%s'"
 msgstr ""
 
-#: config/tc-arc.c:771
+#: config/tc-arc.c:772
 msgid "expected comma after symbol-name"
 msgstr ""
 
-#: config/tc-arc.c:788
+#: config/tc-arc.c:789
 msgid "ignoring attempt to re-define symbol"
 msgstr ""
 
-#: config/tc-arc.c:803
+#: config/tc-arc.c:804
 msgid "expected comma after common length"
 msgstr ""
 
-#: config/tc-arc.c:896
+#: config/tc-arc.c:897
 msgid ".cpu command must appear before any instructions"
 msgstr ""
 
-#: config/tc-arc.c:915
+#: config/tc-arc.c:916
 msgid ".cpu conflicts with previous value"
 msgstr ""
 
-#: config/tc-arc.c:926
+#: config/tc-arc.c:927
 msgid "bad .cpu op"
 msgstr ""
 
-#: config/tc-arc.c:950 config/tc-ppc.c:2621
+#: config/tc-arc.c:951 config/tc-ppc.c:2623
 msgid "missing rename string"
 msgstr ""
 
-#: config/tc-arc.c:962
+#: config/tc-arc.c:963
 msgid "invalid symbol to rename to"
 msgstr ""
 
-#: config/tc-arc.c:1009 config/tc-d10v.c:274 config/tc-d30v.c:353
-#: config/tc-mips.c:8736 config/tc-mn10200.c:356 config/tc-ppc.c:4369
-#: config/tc-sh.c:1187 config/tc-v850.c:1276
+#: config/tc-arc.c:1010 config/tc-d10v.c:284 config/tc-d30v.c:366
+#: config/tc-mips.c:8769 config/tc-mn10200.c:355 config/tc-pj.c:365
+#: config/tc-ppc.c:4384 config/tc-sh.c:1736 config/tc-v850.c:1276
 msgid "bad call to md_atof"
 msgstr ""
 
-#: config/tc-arc.c:1096
+#: config/tc-arc.c:1097
 #, c-format
 msgid "missing ')' in %-op"
 msgstr ""
 
-#: config/tc-arc.c:1130
+#: config/tc-arc.c:1131
 msgid "expression too complex for %%st"
 msgstr ""
 
-#: config/tc-arc.c:1324 config/tc-arm.c:2937 config/tc-d10v.c:1448
-#: config/tc-d30v.c:1810 config/tc-mips.c:3196 config/tc-mips.c:4128
-#: config/tc-mips.c:4913 config/tc-mips.c:5459 config/tc-ppc.c:4704
-#: config/tc-v850.c:2339
+#: config/tc-arc.c:1326 config/tc-arm.c:3146 config/tc-d10v.c:1475
+#: config/tc-d30v.c:1828 config/tc-mips.c:3252 config/tc-mips.c:4184
+#: config/tc-mips.c:4969 config/tc-mips.c:5515 config/tc-ppc.c:4720
+#: config/tc-v850.c:2338
 msgid "expression too complex"
 msgstr ""
 
-#: config/tc-arc.c:1390 config/tc-ppc.c:4807 config/tc-v850.c:2383
+#: config/tc-arc.c:1392 config/tc-ppc.c:4823 config/tc-v850.c:2382
 msgid "unresolved expression that must be resolved"
 msgstr ""
 
-#: config/tc-arc.c:1454 config/tc-sparc.c:2881
+#: config/tc-arc.c:1457 config/tc-sparc.c:3193
 #, c-format
 msgid "internal error: can't export reloc type %d (`%s')"
 msgstr ""
 
-#: config/tc-arm.c:983
+#: config/tc-arm.c:1025
 msgid "Literal Pool Overflow"
 msgstr ""
 
-#: config/tc-arm.c:1103
+#: config/tc-arm.c:1168
 msgid "Invalid syntax for .req directive."
 msgstr ""
 
-#: config/tc-arm.c:1139
-msgid "Nothing to put in the pool\n"
-msgstr ""
-
-#: config/tc-arm.c:1151
-msgid "Inserting implicit pool at change of section"
-msgstr ""
-
-#: config/tc-arm.c:1183 config/tc-mips.c:9851 read.c:2038
+#: config/tc-arm.c:1240 config/tc-mips.c:9924 read.c:2031
 #, c-format
 msgid "Alignment too large: %d. assumed."
 msgstr ""
 
-#: config/tc-arm.c:1186 read.c:2043
+#: config/tc-arm.c:1243 read.c:2036
 msgid "Alignment negative. 0 assumed."
 msgstr ""
 
-#: config/tc-arm.c:1251
+#: config/tc-arm.c:1377 config/tc-m32r.c:411 read.c:2781 read.c:4858
+#, c-format
+msgid "symbol `%s' already defined"
+msgstr ""
+
+#: config/tc-arm.c:1447
 msgid "selected processor does not support THUMB opcodes"
 msgstr ""
 
-#: config/tc-arm.c:1263
+#: config/tc-arm.c:1459
 msgid "selected processor does not support ARM opcodes"
 msgstr ""
 
-#: config/tc-arm.c:1272
+#: config/tc-arm.c:1468
 #, c-format
 msgid "invalid instruction size selected (%d)"
 msgstr ""
 
-#: config/tc-arm.c:1307
+#: config/tc-arm.c:1503
 #, c-format
 msgid "invalid operand to .code directive (%d) (expecting 16 or 32)"
 msgstr ""
 
-#: config/tc-arm.c:1319
+#: config/tc-arm.c:1514
 msgid "Garbage following instruction"
 msgstr ""
 
 #. In the few cases where we might be able to accept something else
-#. this error can be overridden
-#: config/tc-arm.c:1367
+#. this error can be overridden.
+#: config/tc-arm.c:1564
 #, c-format
 msgid "Register expected, not '%.100s'"
 msgstr ""
 
 #. In the few cases where we might be able to accept something else
-#. this error can be overridden
-#: config/tc-arm.c:1393
+#. this error can be overridden.
+#: config/tc-arm.c:1590
 msgid "<psr(f)> expected"
 msgstr ""
 
-#: config/tc-arm.c:1424
+#: config/tc-arm.c:1620
 msgid "Illegal co-processor number"
 msgstr ""
 
-#: config/tc-arm.c:1431
+#: config/tc-arm.c:1627
 msgid "Bad or missing co-processor number"
 msgstr ""
 
-#: config/tc-arm.c:1456
+#: config/tc-arm.c:1651
 msgid "bad or missing expression"
 msgstr ""
 
-#: config/tc-arm.c:1462
+#: config/tc-arm.c:1657
 msgid "immediate co-processor expression too large"
 msgstr ""
 
 #. In the few cases where we might be able to accept something else
-#. this error can be overridden
-#: config/tc-arm.c:1487
+#. this error can be overridden.
+#: config/tc-arm.c:1682
 msgid "Co-processor register expected"
 msgstr ""
 
 #. In the few cases where we might be able to accept something else
-#. this error can be overridden
-#: config/tc-arm.c:1511
+#. this error can be overridden.
+#: config/tc-arm.c:1706
 msgid "Floating point register expected"
 msgstr ""
 
-#: config/tc-arm.c:1529
+#: config/tc-arm.c:1723
 msgid "immediate expression expected"
 msgstr ""
 
-#: config/tc-arm.c:1544
+#: config/tc-arm.c:1738
 msgid "co-processor address must be word aligned"
 msgstr ""
 
-#: config/tc-arm.c:1550
+#: config/tc-arm.c:1744
 msgid "offset too large"
 msgstr ""
 
-#: config/tc-arm.c:1600
+#: config/tc-arm.c:1792
 msgid "pc may not be used in post-increment"
 msgstr ""
 
-#: config/tc-arm.c:1616 config/tc-arm.c:2727
+#: config/tc-arm.c:1808 config/tc-arm.c:2938
 msgid "pre-indexed expression expected"
 msgstr ""
 
-#: config/tc-arm.c:1630 config/tc-arm.c:2740 config/tc-arm.c:3089
+#: config/tc-arm.c:1821 config/tc-arm.c:2950 config/tc-arm.c:3292
 msgid "missing ]"
 msgstr ""
 
-#: config/tc-arm.c:1641
+#: config/tc-arm.c:1831
 msgid "pc may not be used with write-back"
 msgstr ""
 
-#: config/tc-arm.c:1696
+#: config/tc-arm.c:1885
 msgid "<psr> expected"
 msgstr ""
 
-#: config/tc-arm.c:1758 config/tc-arm.c:2378
+#: config/tc-arm.c:1946 config/tc-arm.c:2560
 msgid "Register or shift expression expected"
 msgstr ""
 
-#: config/tc-arm.c:1772 config/tc-arm.c:2090 config/tc-arm.c:2345
-#: config/tc-arm.c:2365
+#: config/tc-arm.c:1960 config/tc-arm.c:2275 config/tc-arm.c:2527
+#: config/tc-arm.c:2547
 msgid "Invalid constant"
 msgstr ""
 
-#: config/tc-arm.c:1783
+#: config/tc-arm.c:1971
 msgid "Error: unrecognised syntax for second argument to msr instruction"
 msgstr ""
 
-#: config/tc-arm.c:1833
+#: config/tc-arm.c:2020
 msgid "rdhi, rdlo and rm must all be different"
 msgstr ""
 
-#: config/tc-arm.c:1890
+#: config/tc-arm.c:2076
 msgid "rd and rm should be different in mul"
 msgstr ""
 
-#: config/tc-arm.c:1947
+#: config/tc-arm.c:2132
 msgid "rd and rm should be different in mla"
 msgstr ""
 
-#: config/tc-arm.c:2074
+#: config/tc-arm.c:2259
 msgid "bad_segment"
 msgstr ""
 
-#: config/tc-arm.c:2121 config/tc-arm.c:2199
+#: config/tc-arm.c:2305 config/tc-arm.c:2382
 msgid "Shift expression expected"
 msgstr ""
 
-#: config/tc-arm.c:2163
+#: config/tc-arm.c:2346
 msgid "Invalid immediate shift"
 msgstr ""
 
-#: config/tc-arm.c:2192
+#: config/tc-arm.c:2375
 msgid "shift requires register or #expression"
 msgstr ""
 
-#: config/tc-arm.c:2193
+#: config/tc-arm.c:2376
 msgid "shift requires #expression"
 msgstr ""
 
-#: config/tc-arm.c:2336 config/tc-arm.c:2770
+#: config/tc-arm.c:2518 config/tc-arm.c:2979
 msgid "Constant expression expected"
 msgstr ""
 
-#: config/tc-arm.c:2432
+#: config/tc-arm.c:2613
 msgid "Invalid floating point immediate expression"
 msgstr ""
 
-#: config/tc-arm.c:2435
+#: config/tc-arm.c:2616
 msgid "Floating point register or immediate expression expected"
 msgstr ""
 
-#: config/tc-arm.c:2574
+#: config/tc-arm.c:2785
 msgid "address offset too large"
 msgstr ""
 
-#: config/tc-arm.c:2645
+#: config/tc-arm.c:2857
 msgid "Processor does not support halfwords or signed bytes"
 msgstr ""
 
-#: config/tc-arm.c:2667
+#: config/tc-arm.c:2878
 msgid "Address expected"
 msgstr ""
 
-#: config/tc-arm.c:2698 config/tc-arm.c:2712 config/tc-arm.c:2750
-msgid "destination register same as write-back base\n"
+#: config/tc-arm.c:2908 config/tc-arm.c:2922 config/tc-arm.c:2959
+#, c-format
+msgid "%s register same as write-back base"
+msgstr ""
+
+#: config/tc-arm.c:2909 config/tc-arm.c:2923 config/tc-arm.c:2960
+msgid "destination"
+msgstr ""
+
+#: config/tc-arm.c:2909 config/tc-arm.c:2923 config/tc-arm.c:2960
+msgid "source"
 msgstr ""
 
-#: config/tc-arm.c:2790
+#: config/tc-arm.c:2999
 msgid "literal pool insertion failed"
 msgstr ""
 
-#: config/tc-arm.c:2826
+#: config/tc-arm.c:3037
 msgid "Pre-increment instruction with translate"
 msgstr ""
 
-#: config/tc-arm.c:2868
+#: config/tc-arm.c:3078
 msgid "Bad range in register list"
 msgstr ""
 
-#: config/tc-arm.c:2876 config/tc-arm.c:2885 config/tc-arm.c:2927
+#: config/tc-arm.c:3086 config/tc-arm.c:3095 config/tc-arm.c:3136
 #, c-format
 msgid "Warning: Duplicated register (r%d) in register list"
 msgstr ""
 
-#: config/tc-arm.c:2888
+#: config/tc-arm.c:3098
 msgid "Warning: Register range not in ascending order"
 msgstr ""
 
-#: config/tc-arm.c:2900
+#: config/tc-arm.c:3109
 msgid "Missing `}'"
 msgstr ""
 
-#: config/tc-arm.c:2916
+#: config/tc-arm.c:3125
 msgid "invalid register mask"
 msgstr ""
 
-#: config/tc-arm.c:2977
+#: config/tc-arm.c:3184
 msgid "r15 not allowed as base register"
 msgstr ""
 
-#: config/tc-arm.c:3047 config/tc-arm.c:3061
+#: config/tc-arm.c:3252 config/tc-arm.c:3266
 msgid "r15 not allowed in swap"
 msgstr ""
 
-#: config/tc-arm.c:3158
-msgid "Use of r15 in bx has undefined behaviour"
-msgstr ""
-
-#: config/tc-arm.c:3417 config/tc-v850.c:1921 config/tc-v850.c:1942
+#: config/tc-arm.c:3619 config/tc-v850.c:1921 config/tc-v850.c:1942
 msgid "constant expression expected"
 msgstr ""
 
-#: config/tc-arm.c:3423
+#: config/tc-arm.c:3625
 msgid "Constant value required for number of registers"
 msgstr ""
 
-#: config/tc-arm.c:3431
+#: config/tc-arm.c:3633
 msgid "number of registers must be in the range [1:4]"
 msgstr ""
 
-#: config/tc-arm.c:3493
+#: config/tc-arm.c:3693
 msgid "R15 not allowed as base register with write-back"
 msgstr ""
 
-#: config/tc-arm.c:3745
+#: config/tc-arm.c:3940
 msgid "lo register required"
 msgstr ""
 
-#: config/tc-arm.c:3753
+#: config/tc-arm.c:3948
 msgid "hi register required"
 msgstr ""
 
-#: config/tc-arm.c:3823
+#: config/tc-arm.c:4017
 msgid "dest and source1 must be the same register"
 msgstr ""
 
-#: config/tc-arm.c:3830
+#: config/tc-arm.c:4024
 msgid "subtract valid only on lo regs"
 msgstr ""
 
-#: config/tc-arm.c:3854
+#: config/tc-arm.c:4048
 msgid "invalid Hi register with immediate"
 msgstr ""
 
-#: config/tc-arm.c:3881 config/tc-arm.c:3914 config/tc-arm.c:3924
+#: config/tc-arm.c:4075 config/tc-arm.c:4108 config/tc-arm.c:4118
 msgid "immediate value out of range"
 msgstr ""
 
-#: config/tc-arm.c:3892
+#: config/tc-arm.c:4086
 msgid "invalid immediate value for stack adjust"
 msgstr ""
 
-#: config/tc-arm.c:3903
+#: config/tc-arm.c:4097
 msgid "invalid immediate for address calculation"
 msgstr ""
 
-#: config/tc-arm.c:3990
+#: config/tc-arm.c:4184
 msgid "source1 and dest must be same register"
 msgstr ""
 
-#: config/tc-arm.c:4025
+#: config/tc-arm.c:4219
 msgid "Invalid immediate for shift"
 msgstr ""
 
-#: config/tc-arm.c:4104
+#: config/tc-arm.c:4298
 msgid "only lo regs allowed with immediate"
 msgstr ""
 
-#: config/tc-arm.c:4123
+#: config/tc-arm.c:4317
 msgid "invalid immediate"
 msgstr ""
 
-#: config/tc-arm.c:4178
+#: config/tc-arm.c:4371
 msgid "expected ']'"
 msgstr ""
 
-#: config/tc-arm.c:4245
+#: config/tc-arm.c:4437
 msgid "byte or halfword not valid for base register"
 msgstr ""
 
-#: config/tc-arm.c:4250
+#: config/tc-arm.c:4442
 msgid "R15 based store not allowed"
 msgstr ""
 
-#: config/tc-arm.c:4255
+#: config/tc-arm.c:4447
 msgid "Invalid base register for register offset"
 msgstr ""
 
-#: config/tc-arm.c:4273
+#: config/tc-arm.c:4465
 msgid "invalid offset"
 msgstr ""
 
-#: config/tc-arm.c:4284
+#: config/tc-arm.c:4476
 msgid "invalid base register in load/store"
 msgstr ""
 
-#: config/tc-arm.c:4308 config/tc-arm.c:5469 config/tc-arm.c:5478
-#: config/tc-arm.c:5485 config/tc-arm.c:5492 config/tc-arm.c:5499
+#: config/tc-arm.c:4500
 msgid "Invalid offset"
 msgstr ""
 
-#: config/tc-arm.c:4386
+#: config/tc-arm.c:4574
 msgid "dest and source1 one must be the same register"
 msgstr ""
 
-#: config/tc-arm.c:4394
+#: config/tc-arm.c:4582
 msgid "Rs and Rd must be different in MUL"
 msgstr ""
 
-#: config/tc-arm.c:4539
+#: config/tc-arm.c:4726
 msgid ""
 "Inserted missing '!': load/store multiple always writes back base register"
 msgstr ""
 
-#: config/tc-arm.c:4555 config/tc-arm.c:4657
+#: config/tc-arm.c:4742 config/tc-arm.c:4842
 msgid "Expression too complex"
 msgstr ""
 
-#: config/tc-arm.c:4561
+#: config/tc-arm.c:4748
 msgid "only lo-regs valid in load/store multiple"
 msgstr ""
 
-#: config/tc-arm.c:4608
+#: config/tc-arm.c:4794
 msgid "Syntax: ldrs[b] Rd, [Rb, Ro]"
 msgstr ""
 
-#: config/tc-arm.c:4673
+#: config/tc-arm.c:4858
 msgid "invalid register list to push/pop instruction"
 msgstr ""
 
-#: config/tc-arm.c:4811
+#: config/tc-arm.c:4994
 msgid "Virtual memory exhausted"
 msgstr ""
 
-#: config/tc-arm.c:5203
+#: config/tc-arm.c:5396
 #, c-format
-msgid "invalid constant (%x) after fixup\n"
+msgid "invalid constant (%lx) after fixup"
 msgstr ""
 
-#: config/tc-arm.c:5215 config/tc-arm.c:5236
+#: config/tc-arm.c:5430
 #, c-format
-msgid "bad immediate value for offset (%d)"
+msgid "Unable to compute ADRL instructions for PC offset of 0x%x"
+msgstr ""
+
+#: config/tc-arm.c:5458
+#, c-format
+msgid "bad immediate value for offset (%ld)"
+msgstr ""
+
+#: config/tc-arm.c:5479 config/tc-arm.c:5501
+msgid "invalid literal constant: pool needs to be closer"
 msgstr ""
 
-#: config/tc-arm.c:5234 config/tc-arm.c:5257
-msgid "invalid literal constant: pool needs to be closer\n"
+#: config/tc-arm.c:5481
+#, c-format
+msgid "bad immediate value for half-word offset (%ld)"
 msgstr ""
 
-#: config/tc-arm.c:5274
+#: config/tc-arm.c:5518
 msgid "shift expression is too large"
 msgstr ""
 
-#: config/tc-arm.c:5292 config/tc-arm.c:5301
+#: config/tc-arm.c:5536 config/tc-arm.c:5545
 msgid "Invalid swi expression"
 msgstr ""
 
-#: config/tc-arm.c:5311
+#: config/tc-arm.c:5555
 msgid "Invalid expression in load/store multiple"
 msgstr ""
 
-#: config/tc-arm.c:5339 config/tc-arm.c:5355 config/tc-mips.c:9678
+#: config/tc-arm.c:5584 config/tc-arm.c:5600 config/tc-mips.c:9751
 msgid "Branch out of range"
 msgstr ""
 
-#: config/tc-arm.c:5374
+#: config/tc-arm.c:5622
 msgid "Branch with link out of range"
 msgstr ""
 
-#: config/tc-arm.c:5441
+#: config/tc-arm.c:5689
 msgid "Illegal value for co-processor offset"
 msgstr ""
 
-#: config/tc-arm.c:5464
+#: config/tc-arm.c:5712
 #, c-format
 msgid "Invalid offset, target not word aligned (0x%08X)"
 msgstr ""
 
-#: config/tc-arm.c:5535
+#: config/tc-arm.c:5717 config/tc-arm.c:5726 config/tc-arm.c:5733
+#: config/tc-arm.c:5740 config/tc-arm.c:5747
+#, c-format
+msgid "Invalid offset, value too big (0x%08X)"
+msgstr ""
+
+#: config/tc-arm.c:5784
 msgid "Invalid immediate for stack address calculation"
 msgstr ""
 
-#: config/tc-arm.c:5544
+#: config/tc-arm.c:5793
 #, c-format
-msgid "Invalid immediate for address calculation (value = 0x%08X)"
+msgid "Invalid immediate for address calculation (value = 0x%08lX)"
 msgstr ""
 
-#: config/tc-arm.c:5553
+#: config/tc-arm.c:5803
 msgid "Invalid 8bit immediate"
 msgstr ""
 
-#: config/tc-arm.c:5561
+#: config/tc-arm.c:5811
 msgid "Invalid 3bit immediate"
 msgstr ""
 
-#: config/tc-arm.c:5577
+#: config/tc-arm.c:5827
 #, c-format
-msgid "Invalid immediate: %d is too large"
+msgid "Invalid immediate: %ld is too large"
 msgstr ""
 
-#: config/tc-arm.c:5591
+#: config/tc-arm.c:5842
 #, c-format
-msgid "Illegal Thumb shift value: %d"
+msgid "Illegal Thumb shift value: %ld"
 msgstr ""
 
-#: config/tc-arm.c:5605
+#: config/tc-arm.c:5856
 #, c-format
-msgid "Bad relocation fixup type (%d)\n"
+msgid "Bad relocation fixup type (%d)"
 msgstr ""
 
-#: config/tc-arm.c:5674
-msgid "Literal referenced across section boundry (Implicit dump?)"
+#: config/tc-arm.c:5926
+msgid "Literal referenced across section boundary (Implicit dump?)"
 msgstr ""
 
-#: config/tc-arm.c:5693
+#: config/tc-arm.c:5939
 #, c-format
 msgid "Internal_relocation (type %d) not fixed up (IMMEDIATE)"
 msgstr ""
 
-#: config/tc-arm.c:5699
+#: config/tc-arm.c:5945
+msgid "ADRL used for a symbol not defined in the same file"
+msgstr ""
+
+#: config/tc-arm.c:5951
 #, c-format
 msgid "Internal_relocation (type %d) not fixed up (OFFSET_IMM)"
 msgstr ""
 
-#: config/tc-arm.c:5722
+#: config/tc-arm.c:5971 config/tc-mcore.c:2110 config/tc-ns32k.c:2283
+msgid "<unknown>"
+msgstr ""
+
+#: config/tc-arm.c:5974
 #, c-format
 msgid "Can not represent %s relocation in this object file format (%d)"
 msgstr ""
 
-#: config/tc-arm.c:5740 config/tc-mips.c:11166 config/tc-sh.c:2282
+#: config/tc-arm.c:5995 config/tc-mips.c:11241 config/tc-sh.c:2859
 #, c-format
 msgid "Can not represent %s relocation in this object file format"
 msgstr ""
 
-#: config/tc-arm.c:5753
+#: config/tc-arm.c:6013
 msgid "md_estimate_size_before_relax\n"
 msgstr ""
 
-#: config/tc-arm.c:5823
+#: config/tc-arm.c:6088
 #, c-format
 msgid "No operator -- statement `%s'\n"
 msgstr ""
 
-#: config/tc-arm.c:5873 config/tc-arm.c:5925
+#: config/tc-arm.c:6106
+msgid "selected processor does not support this opcode"
+msgstr ""
+
+#: config/tc-arm.c:6150
 #, c-format
-msgid "Opcode `%s' must have suffix from <%s>\n"
+msgid "Opcode `%s' must have suffix from list: <%s>"
 msgstr ""
 
-#: config/tc-arm.c:5898
+#: config/tc-arm.c:6180
 msgid "Warning: Use of the 'nv' conditional is deprecated\n"
 msgstr ""
 
-#: config/tc-arm.c:6017
+#: config/tc-arm.c:6197
+#, c-format
+msgid "Opcode `%s' is unconditional\n"
+msgstr ""
+
+#: config/tc-arm.c:6222
+#, c-format
+msgid "Opcode `%s' must have suffix from <%s>\n"
+msgstr ""
+
+#: config/tc-arm.c:6308
 #, c-format
 msgid "register '%s' does not exist\n"
 msgstr ""
 
-#: config/tc-arm.c:6023
+#: config/tc-arm.c:6313
 #, c-format
 msgid "ignoring redefinition of register alias '%s'"
 msgstr ""
 
-#: config/tc-arm.c:6028
+#: config/tc-arm.c:6318
 #, c-format
 msgid ""
 "ignoring redefinition of register alias '%s' to non-existant register '%s'"
 msgstr ""
 
-#: config/tc-arm.c:6032
+#: config/tc-arm.c:6322
 msgid "ignoring incomplete .req pseuso op"
 msgstr ""
 
-#: config/tc-arm.c:6208
+#: config/tc-arm.c:6502
 #, c-format
 msgid "Unrecognised APCS switch -m%s"
 msgstr ""
 
-#: config/tc-arm.c:6334 config/tc-arm.c:6345 config/tc-arm.c:6356
-#: config/tc-arm.c:6361
+#: config/tc-arm.c:6634 config/tc-arm.c:6645 config/tc-arm.c:6656
+#: config/tc-arm.c:6667 config/tc-arm.c:6672
 #, c-format
 msgid "Invalid architecture variant -m%s"
 msgstr ""
 
-#: config/tc-arm.c:6368
+#: config/tc-arm.c:6679
 #, c-format
 msgid "Invalid processor variant -m%s"
 msgstr ""
 
-#: config/tc-arm.c:6390
+#: config/tc-arm.c:6703
 msgid ""
 " ARM Specific Assembler Options:\n"
 "  -m[arm][<processor name>] select processor variant\n"
-"  -m[arm]v[2|2a|3|3m|4|4t]  select architecture variant\n"
+"  -m[arm]v[2|2a|3|3m|4|4t|5[t][e]] select architecture variant\n"
 "  -mthumb                   only allow Thumb instructions\n"
 "  -mthumb-interwork         mark the assembled code as supporting "
 "interworking\n"
@@ -1815,145 +2037,145 @@ msgid ""
 "  -mno-fpu                  don't allow any floating-point instructions.\n"
 msgstr ""
 
-#: config/tc-arm.c:6401
+#: config/tc-arm.c:6714
 msgid "  -k                        generate PIC code.\n"
 msgstr ""
 
-#: config/tc-arm.c:6405
+#: config/tc-arm.c:6718
 msgid ""
 "  -mapcs-32, -mapcs-26      specify which ARM Procedure Calling Standard to "
 "use\n"
 msgstr ""
 
-#: config/tc-arm.c:6408
+#: config/tc-arm.c:6721
 msgid "  -mapcs-float              floating point args are passed in FP regs\n"
 msgstr ""
 
-#: config/tc-arm.c:6411
+#: config/tc-arm.c:6724
 msgid ""
 "  -mapcs-reentrant          the code is position independent/reentrant\n"
 msgstr ""
 
-#: config/tc-arm.c:6416
+#: config/tc-arm.c:6729
 msgid "  -moabi                    support the old ELF ABI\n"
 msgstr ""
 
-#: config/tc-arm.c:6421
+#: config/tc-arm.c:6734
 msgid ""
 "  -EB                       assemble code for a big endian cpu\n"
 "  -EL                       assemble code for a little endian cpu\n"
 msgstr ""
 
-#: config/tc-arm.c:6594
+#: config/tc-arm.c:6883
 #, c-format
 msgid "%s: unexpected function type: %d"
 msgstr ""
 
-#: config/tc-d10v.c:218
+#: config/tc-d10v.c:228
 msgid ""
 "D10V options:\n"
 "-O                      optimize.  Will do some operations in parallel.\n"
 msgstr ""
 
-#: config/tc-d10v.c:521 config/tc-d10v.c:603 config/tc-d30v.c:639
+#: config/tc-d10v.c:547 config/tc-d10v.c:629 config/tc-d30v.c:652
 #, c-format
 msgid "operand out of range: %d"
 msgstr ""
 
-#: config/tc-d10v.c:664
+#: config/tc-d10v.c:690
 msgid "Instruction must be executed in parallel with another instruction."
 msgstr ""
 
-#: config/tc-d10v.c:716
+#: config/tc-d10v.c:742
 msgid "Instruction must be executed in parallel"
 msgstr ""
 
-#: config/tc-d10v.c:719
+#: config/tc-d10v.c:745
 msgid "Long instructions may not be combined."
 msgstr ""
 
-#: config/tc-d10v.c:759
+#: config/tc-d10v.c:785
 msgid "One of these instructions may not be executed in parallel."
 msgstr ""
 
-#: config/tc-d10v.c:764 config/tc-d30v.c:843
+#: config/tc-d10v.c:790 config/tc-d30v.c:860
 msgid "Two IU instructions may not be executed in parallel"
 msgstr ""
 
-#: config/tc-d10v.c:766 config/tc-d10v.c:774 config/tc-d10v.c:789
-#: config/tc-d10v.c:802 config/tc-d30v.c:844 config/tc-d30v.c:853
+#: config/tc-d10v.c:792 config/tc-d10v.c:800 config/tc-d10v.c:815
+#: config/tc-d10v.c:828 config/tc-d30v.c:861 config/tc-d30v.c:870
 msgid "Swapping instruction order"
 msgstr ""
 
-#: config/tc-d10v.c:772 config/tc-d30v.c:850
+#: config/tc-d10v.c:798 config/tc-d30v.c:867
 msgid "Two MU instructions may not be executed in parallel"
 msgstr ""
 
-#: config/tc-d10v.c:793 config/tc-d30v.c:869
+#: config/tc-d10v.c:819 config/tc-d30v.c:886
 msgid "IU instruction may not be in the left container"
 msgstr ""
 
-#: config/tc-d10v.c:806 config/tc-d30v.c:882
+#: config/tc-d10v.c:832 config/tc-d30v.c:899
 msgid "MU instruction may not be in the right container"
 msgstr ""
 
-#: config/tc-d10v.c:810 config/tc-d30v.c:890
+#: config/tc-d10v.c:836 config/tc-d30v.c:907
 msgid "unknown execution type passed to write_2_short()"
 msgstr ""
 
-#: config/tc-d10v.c:1023 config/tc-d10v.c:1037 config/tc-h8300.c:1279
-#: config/tc-h8500.c:1122 config/tc-mcore.c:842 config/tc-sh.c:1040
-#: config/tc-z8k.c:1223
+#: config/tc-d10v.c:1049 config/tc-d10v.c:1063 config/tc-h8300.c:1279
+#: config/tc-h8500.c:1122 config/tc-mcore.c:989 config/tc-pj.c:274
+#: config/tc-sh.c:1349 config/tc-z8k.c:1223
 msgid "can't find opcode "
 msgstr ""
 
-#: config/tc-d10v.c:1050 config/tc-d10v.c:1068 config/tc-d30v.c:1368
+#: config/tc-d10v.c:1076 config/tc-d10v.c:1094 config/tc-d30v.c:1385
 msgid "Unable to mix instructions as specified"
 msgstr ""
 
-#: config/tc-d10v.c:1116 config/tc-d30v.c:1503
+#: config/tc-d10v.c:1142 config/tc-d30v.c:1520
 #, c-format
 msgid "unknown opcode: %s"
 msgstr ""
 
-#: config/tc-d10v.c:1197 config/tc-d10v.c:1343 config/tc-tic80.c:537
+#: config/tc-d10v.c:1223 config/tc-d10v.c:1369 config/tc-tic80.c:537
 msgid "bad opcode or operands"
 msgstr ""
 
-#: config/tc-d10v.c:1246 config/tc-m68k.c:4232
+#: config/tc-d10v.c:1272 config/tc-m68k.c:4232
 msgid "value out of range"
 msgstr ""
 
-#: config/tc-d10v.c:1318
+#: config/tc-d10v.c:1344
 msgid "illegal operand - register name found where none expected"
 msgstr ""
 
-#: config/tc-d10v.c:1354 config/tc-tic80.c:548
+#: config/tc-d10v.c:1380 config/tc-tic80.c:548
 msgid "Register number must be EVEN"
 msgstr ""
 
-#: config/tc-d10v.c:1385 config/tc-d30v.c:1754 config/tc-mn10200.c:1234
-#: config/tc-mn10300.c:1425 config/tc-ppc.c:5004 config/tc-v850.c:2254
+#: config/tc-d10v.c:1412 config/tc-d30v.c:1772 config/tc-mn10200.c:1233
+#: config/tc-mn10300.c:1761 config/tc-ppc.c:5020 config/tc-v850.c:2255
 #, c-format
 msgid "reloc %d not supported by object file format"
 msgstr ""
 
-#: config/tc-d10v.c:1498
+#: config/tc-d10v.c:1525
 #, c-format
 msgid "line %d: rep or repi must include at least 4 instructions"
 msgstr ""
 
-#: config/tc-d10v.c:1517 config/tc-d30v.c:1935
+#: config/tc-d10v.c:1544 config/tc-d30v.c:1953
 #, c-format
 msgid "line %d: unknown relocation type: 0x%x"
 msgstr ""
 
-#: config/tc-d30v.c:184
+#: config/tc-d30v.c:191
 #, c-format
 msgid "Register name %s conflicts with symbol of the same name"
 msgstr ""
 
-#: config/tc-d30v.c:276
+#: config/tc-d30v.c:289
 msgid ""
 "\n"
 "D30V options:\n"
@@ -1966,116 +2188,133 @@ msgid ""
 "-C                      Opposite of -C.  -c is the default.\n"
 msgstr ""
 
-#: config/tc-d30v.c:450
+#: config/tc-d30v.c:463
 msgid "unexpected 12-bit reloc type"
 msgstr ""
 
-#: config/tc-d30v.c:457
+#: config/tc-d30v.c:470
 msgid "unexpected 18-bit reloc type"
 msgstr ""
 
-#: config/tc-d30v.c:701
+#: config/tc-d30v.c:714
 #, c-format
 msgid "%s NOP inserted"
 msgstr ""
 
-#: config/tc-d30v.c:702
+#: config/tc-d30v.c:715
 msgid "sequential"
 msgstr ""
 
-#: config/tc-d30v.c:702
+#: config/tc-d30v.c:715
 msgid "parallel"
 msgstr ""
 
-#: config/tc-d30v.c:839
+#: config/tc-d30v.c:856
 msgid "Instructions may not be executed in parallel"
 msgstr ""
 
-#: config/tc-d30v.c:852 config/tc-d30v.c:859 config/tc-d30v.c:875
-#: config/tc-d30v.c:884
+#: config/tc-d30v.c:869 config/tc-d30v.c:876 config/tc-d30v.c:892
+#: config/tc-d30v.c:901
 #, c-format
 msgid "Executing %s in IU may not work"
 msgstr ""
 
-#: config/tc-d30v.c:871
+#: config/tc-d30v.c:888
 #, c-format
 msgid "special left instruction `%s' kills instruction `%s' in right container"
 msgstr ""
 
-#: config/tc-d30v.c:1250 config/tc-d30v.c:1267
+#: config/tc-d30v.c:1267 config/tc-d30v.c:1284
 msgid "Cannot assemble instruction"
 msgstr ""
 
-#: config/tc-d30v.c:1252
+#: config/tc-d30v.c:1269
 msgid "First opcode is long.  Unable to mix instructions as specified."
 msgstr ""
 
-#: config/tc-d30v.c:1320
+#: config/tc-d30v.c:1337
 msgid "word of NOPs added between word multiply and load"
 msgstr ""
 
-#: config/tc-d30v.c:1322
+#: config/tc-d30v.c:1339
 msgid "word of NOPs added between word multiply and 16-bit multiply"
 msgstr ""
 
-#: config/tc-d30v.c:1352
+#: config/tc-d30v.c:1369
 msgid "Instruction uses long version, so it cannot be mixed as specified"
 msgstr ""
 
-#: config/tc-d30v.c:1436 config/tc-d30v.c:1473
+#: config/tc-d30v.c:1453 config/tc-d30v.c:1490
 #, c-format
 msgid "unknown condition code: %s"
 msgstr ""
 
-#: config/tc-d30v.c:1466
+#: config/tc-d30v.c:1483
 #, c-format
 msgid "cmpu doesn't support condition code %s"
 msgstr ""
 
-#: config/tc-d30v.c:1514
+#: config/tc-d30v.c:1531
 #, c-format
 msgid "operands for opcode `%s' do not match any valid format"
 msgstr ""
 
-#: config/tc-d30v.c:1727
+#: config/tc-d30v.c:1744
 msgid "Odd numbered register used as target of multi-register instruction"
 msgstr ""
 
-#: config/tc-d30v.c:1824
+#: config/tc-d30v.c:1842
 #, c-format
 msgid "line %d: unable to place address of symbol '%s' into a byte"
 msgstr ""
 
-#: config/tc-d30v.c:1827
+#: config/tc-d30v.c:1845
 #, c-format
 msgid "line %d: unable to place value %x into a byte"
 msgstr ""
 
-#: config/tc-d30v.c:1835
+#: config/tc-d30v.c:1853
 #, c-format
 msgid "line %d: unable to place address of symbol '%s' into a short"
 msgstr ""
 
-#: config/tc-d30v.c:1838
+#: config/tc-d30v.c:1856
 #, c-format
 msgid "line %d: unable to place value %x into a short"
 msgstr ""
 
-#: config/tc-d30v.c:1846
+#: config/tc-d30v.c:1864
 #, c-format
 msgid "line %d: unable to place address of symbol '%s' into a quad"
 msgstr ""
 
-#: config/tc-d30v.c:2016
+#: config/tc-d30v.c:2034
 #, c-format
 msgid "value too large to fit in %d bits"
 msgstr ""
 
-#: config/tc-d30v.c:2159
+#: config/tc-d30v.c:2178
 #, c-format
 msgid "Alignment too large: %d assumed"
 msgstr ""
 
+#: config/tc-fr30.c:84
+msgid " FR30 specific command line options:\n"
+msgstr ""
+
+#: config/tc-fr30.c:143
+#, c-format
+msgid "Instruction %s not allowed in a delay slot."
+msgstr ""
+
+#: config/tc-fr30.c:380 config/tc-m32r.c:1530
+msgid "Addend to unresolved symbol not on word boundary."
+msgstr ""
+
+#: config/tc-fr30.c:538 config/tc-i960.c:786 config/tc-m32r.c:1837
+msgid "Bad call to md_atof()"
+msgstr ""
+
 #: config/tc-h8300.c:254 config/tc-h8300.c:262
 msgid "Reg not valid for H8/300"
 msgstr ""
@@ -2148,8 +2387,8 @@ msgstr ""
 msgid "invalid operands"
 msgstr ""
 
-#: config/tc-h8300.c:1290 config/tc-h8500.c:1129 config/tc-mips.c:7932
-#: config/tc-sh.c:1047 config/tc-w65.c:759 config/tc-z8k.c:1235
+#: config/tc-h8300.c:1290 config/tc-h8500.c:1129 config/tc-mips.c:7965
+#: config/tc-sh.c:1578 config/tc-w65.c:759 config/tc-z8k.c:1235
 msgid "unknown opcode"
 msgstr ""
 
@@ -2157,12 +2396,12 @@ msgstr ""
 msgid "mismatch between opcode size and operand size"
 msgstr ""
 
-#: config/tc-h8300.c:1348 config/tc-h8500.c:1157 config/tc-sh.c:1144
+#: config/tc-h8300.c:1348 config/tc-h8500.c:1157 config/tc-sh.c:1692
 #: config/tc-w65.c:791 config/tc-z8k.c:1290
 msgid "call to tc_crawl_symbol_chain \n"
 msgstr ""
 
-#: config/tc-h8300.c:1362 config/tc-h8500.c:1171 config/tc-sh.c:1151
+#: config/tc-h8300.c:1362 config/tc-h8500.c:1171 config/tc-sh.c:1699
 #: config/tc-w65.c:805 config/tc-z8k.c:1304
 msgid "call to tc_headers_hook \n"
 msgstr ""
@@ -2207,654 +2446,714 @@ msgstr ""
 msgid "@Rn needs word register"
 msgstr ""
 
-#: config/tc-h8500.c:845 config/tc-sh.c:844
+#: config/tc-h8500.c:845 config/tc-sh.c:1145
 #, c-format
 msgid "unhandled %d\n"
 msgstr ""
 
-#: config/tc-h8500.c:873 config/tc-sh.c:865
+#: config/tc-h8500.c:873 config/tc-sh.c:1167
 #, c-format
 msgid "operand must be absolute in range %d..%d"
 msgstr ""
 
-#: config/tc-h8500.c:963 config/tc-sh.c:986
+#: config/tc-h8500.c:963 config/tc-sh.c:1293
 #, c-format
 msgid "failed for %d\n"
 msgstr ""
 
-#: config/tc-h8500.c:1145 config/tc-sh.c:1082 config/tc-w65.c:779
+#: config/tc-h8500.c:1145 config/tc-sh.c:1388 config/tc-sh.c:1626
+#: config/tc-w65.c:779
 msgid "invalid operands for opcode"
 msgstr ""
 
-#: config/tc-hppa.c:1096
+#: config/tc-hppa.c:1140
 msgid "Missing .exit\n"
 msgstr ""
 
-#: config/tc-hppa.c:1099
+#: config/tc-hppa.c:1143
 msgid "Missing .procend\n"
 msgstr ""
 
-#: config/tc-hppa.c:1108
-msgid "Not in a space.\n"
-msgstr ""
-
-#: config/tc-hppa.c:1111
-msgid "Not in a subspace.\n"
-msgstr ""
-
-#: config/tc-hppa.c:1273
+#: config/tc-hppa.c:1322
 msgid "Invalid field selector.  Assuming F%%."
 msgstr ""
 
-#: config/tc-hppa.c:1304
+#: config/tc-hppa.c:1353
 msgid "-R option not supported on this target."
 msgstr ""
 
-#: config/tc-hppa.c:1318
+#: config/tc-hppa.c:1369 config/tc-sparc.c:736 config/tc-sparc.c:771
 #, c-format
 msgid "Internal error: can't hash `%s': %s\n"
 msgstr ""
 
-#: config/tc-hppa.c:1326 config/tc-i860.c:191 config/tc-sparc.c:704
+#: config/tc-hppa.c:1377 config/tc-i860.c:191
 #, c-format
 msgid "internal error: losing opcode: `%s' \"%s\"\n"
 msgstr ""
 
-#: config/tc-hppa.c:1388 config/tc-hppa.c:5183 config/tc-hppa.c:5235
+#: config/tc-hppa.c:1446 config/tc-hppa.c:6873 config/tc-hppa.c:6928
 msgid "Missing function name for .PROC (corrupted label chain)"
 msgstr ""
 
-#: config/tc-hppa.c:1391 config/tc-hppa.c:5238
+#: config/tc-hppa.c:1449 config/tc-hppa.c:6931
 msgid "Missing function name for .PROC"
 msgstr ""
 
-#: config/tc-hppa.c:1494 config/tc-hppa.c:3463
+#: config/tc-hppa.c:1570 config/tc-hppa.c:4715
 msgid "could not update architecture and machine"
 msgstr ""
 
-#: config/tc-hppa.c:1625
+#: config/tc-hppa.c:1783
 msgid "Invalid Indexed Load Completer."
 msgstr ""
 
-#: config/tc-hppa.c:1630
+#: config/tc-hppa.c:1788
 msgid "Invalid Indexed Load Completer Syntax."
 msgstr ""
 
-#: config/tc-hppa.c:1654
+#: config/tc-hppa.c:1824
 msgid "Invalid Short Load/Store Completer."
 msgstr ""
 
-#: config/tc-hppa.c:1681 config/tc-hppa.c:1686
+#: config/tc-hppa.c:1883 config/tc-hppa.c:1888
 msgid "Invalid Store Bytes Short Completer"
 msgstr ""
 
-#: config/tc-hppa.c:1696 config/tc-hppa.c:1728
+#: config/tc-hppa.c:2199 config/tc-hppa.c:2205
+msgid "Invalid left/right combination completer"
+msgstr ""
+
+#: config/tc-hppa.c:2254 config/tc-hppa.c:2261
+msgid "Invalid permutation completer"
+msgstr ""
+
+#: config/tc-hppa.c:2362
 #, c-format
-msgid "Invalid Compare/Subtract Condition: %c"
+msgid "Invalid Add Condition: %s"
 msgstr ""
 
-#: config/tc-hppa.c:1711
-msgid "Invalid Compare/Subtract Condition."
+#: config/tc-hppa.c:2373 config/tc-hppa.c:2383
+#, c-format
+msgid "Invalid Add and Branch Condition: %c"
 msgstr ""
 
-#: config/tc-hppa.c:1743
+#: config/tc-hppa.c:2404
 msgid "Invalid Compare/Subtract Condition"
 msgstr ""
 
-#: config/tc-hppa.c:1821 config/tc-hppa.c:1894
+#: config/tc-hppa.c:2444
 #, c-format
-msgid "Invalid Add Condition: %s"
+msgid "Invalid Bit Branch Condition: %c"
+msgstr ""
+
+#: config/tc-hppa.c:2530
+#, c-format
+msgid "Invalid Compare/Subtract Condition: %s"
 msgstr ""
 
-#: config/tc-hppa.c:1948 config/tc-hppa.c:2025
+#: config/tc-hppa.c:2542
+#, c-format
+msgid "Invalid Compare/Subtract Condition: %c"
+msgstr ""
+
+#: config/tc-hppa.c:2557
+msgid "Invalid Compare and Branch Condition."
+msgstr ""
+
+#: config/tc-hppa.c:2655
 msgid "Invalid Logical Instruction Condition."
 msgstr ""
 
-#: config/tc-hppa.c:2067
+#: config/tc-hppa.c:2711
 msgid "Invalid Shift/Extract/Deposit Condition."
 msgstr ""
 
-#: config/tc-hppa.c:2089
-#, c-format
-msgid "Invalid Bit Branch Condition: %c"
+#: config/tc-hppa.c:2823
+msgid "Invalid Unit Instruction Condition."
 msgstr ""
 
-#: config/tc-hppa.c:2202 config/tc-hppa.c:2235 config/tc-hppa.c:2272
+#: config/tc-hppa.c:3096 config/tc-hppa.c:3129 config/tc-hppa.c:3166
+#: config/tc-hppa.c:3205
 msgid "Branch to unaligned address"
 msgstr ""
 
-#: config/tc-hppa.c:2335
+#: config/tc-hppa.c:3389
 msgid "Invalid SFU identifier"
 msgstr ""
 
-#: config/tc-hppa.c:2375
+#: config/tc-hppa.c:3439
 msgid "Invalid COPR identifier"
 msgstr ""
 
-#: config/tc-hppa.c:2500 config/tc-hppa.c:2521 config/tc-hppa.c:2541
-#: config/tc-hppa.c:2561 config/tc-hppa.c:2581
-msgid "Invalid register for single precision fmpyadd or fmpysub"
+#: config/tc-hppa.c:3568
+msgid "Invalid Floating Point Operand Format."
 msgstr ""
 
-#: config/tc-hppa.c:2605
-msgid "Invalid Floating Point Operand Format."
+#: config/tc-hppa.c:3706 config/tc-hppa.c:3730 config/tc-hppa.c:3753
+#: config/tc-hppa.c:3776 config/tc-hppa.c:3799
+msgid "Invalid register for single precision fmpyadd or fmpysub"
 msgstr ""
 
-#: config/tc-hppa.c:2628
+#: config/tc-hppa.c:3848
 #, c-format
 msgid "Invalid operands %s"
 msgstr ""
 
-#: config/tc-hppa.c:3163
+#: config/tc-hppa.c:4415
 msgid "Unknown relocation encountered in md_apply_fix."
 msgstr ""
 
-#: config/tc-hppa.c:3173
+#: config/tc-hppa.c:4425
 #, c-format
 msgid "no hppa_fixup entry for this fixup (fixP = 0x%x, type = 0x%x)\n"
 msgstr ""
 
-#: config/tc-hppa.c:3315 config/tc-hppa.c:3340
+#: config/tc-hppa.c:4567 config/tc-hppa.c:4592
 #, c-format
 msgid "Undefined register: '%s'."
 msgstr ""
 
-#: config/tc-hppa.c:3378
+#: config/tc-hppa.c:4630
 #, c-format
 msgid "Non-absolute symbol: '%s'."
 msgstr ""
 
-#: config/tc-hppa.c:3393
+#: config/tc-hppa.c:4645
 #, c-format
 msgid "Undefined absolute constant: '%s'."
 msgstr ""
 
-#: config/tc-hppa.c:3502
+#: config/tc-hppa.c:4754
 #, c-format
 msgid "Invalid FP Compare Condition: %s"
 msgstr ""
 
-#: config/tc-hppa.c:3543
+#: config/tc-hppa.c:4810
+#, c-format
+msgid "Invalid FTEST completer: %s"
+msgstr ""
+
+#: config/tc-hppa.c:4877 config/tc-hppa.c:4915
 #, c-format
 msgid "Invalid FP Operand Format: %3s"
 msgstr ""
 
-#: config/tc-hppa.c:3624
+#: config/tc-hppa.c:4994
 msgid "Bad segment in expression."
 msgstr ""
 
-#: config/tc-hppa.c:3675
+#: config/tc-hppa.c:5053
 msgid "Bad segment (should be absolute)."
 msgstr ""
 
-#: config/tc-hppa.c:3774
+#: config/tc-hppa.c:5152
 #, c-format
 msgid "Invalid argument location: %s\n"
 msgstr ""
 
-#: config/tc-hppa.c:3805
+#: config/tc-hppa.c:5183
 #, c-format
 msgid "Invalid argument description: %d"
 msgstr ""
 
-#: config/tc-hppa.c:3828
+#: config/tc-hppa.c:5206
 #, c-format
 msgid "Invalid Nullification: (%c)"
 msgstr ""
 
-#: config/tc-hppa.c:4301
+#: config/tc-hppa.c:5950
 #, c-format
 msgid "Invalid .CALL argument: %s"
 msgstr ""
 
-#: config/tc-hppa.c:4420
+#: config/tc-hppa.c:6082
 msgid ".callinfo is not within a procedure definition"
 msgstr ""
 
-#: config/tc-hppa.c:4440
+#: config/tc-hppa.c:6102
 #, c-format
 msgid "FRAME parameter must be a multiple of 8: %d\n"
 msgstr ""
 
-#: config/tc-hppa.c:4459
+#: config/tc-hppa.c:6121
 msgid "Value for ENTRY_GR must be in the range 3..18\n"
 msgstr ""
 
-#: config/tc-hppa.c:4471
+#: config/tc-hppa.c:6133
 msgid "Value for ENTRY_FR must be in the range 12..21\n"
 msgstr ""
 
-#: config/tc-hppa.c:4481
+#: config/tc-hppa.c:6143
 msgid "Value for ENTRY_SR must be 3\n"
 msgstr ""
 
-#: config/tc-hppa.c:4537
+#: config/tc-hppa.c:6199
 #, c-format
 msgid "Invalid .CALLINFO argument: %s"
 msgstr ""
 
-#: config/tc-hppa.c:4627
+#: config/tc-hppa.c:6293
 msgid "The .ENTER pseudo-op is not supported"
 msgstr ""
 
-#: config/tc-hppa.c:4641
+#: config/tc-hppa.c:6309
 msgid "Misplaced .entry. Ignored."
 msgstr ""
 
-#: config/tc-hppa.c:4645
+#: config/tc-hppa.c:6313
 msgid "Missing .callinfo."
 msgstr ""
 
-#: config/tc-hppa.c:4693
+#: config/tc-hppa.c:6361
 msgid ".REG must use a label"
 msgstr ""
 
-#: config/tc-hppa.c:4695
+#: config/tc-hppa.c:6363
 msgid ".EQU must use a label"
 msgstr ""
 
-#: config/tc-hppa.c:4746
+#: config/tc-hppa.c:6416
 msgid ".EXIT must appear within a procedure"
 msgstr ""
 
-#: config/tc-hppa.c:4750
+#: config/tc-hppa.c:6420
 msgid "Missing .callinfo"
 msgstr ""
 
-#: config/tc-hppa.c:4754
+#: config/tc-hppa.c:6424
 msgid "No .ENTRY for this .EXIT"
 msgstr ""
 
-#: config/tc-hppa.c:4781
+#: config/tc-hppa.c:6451
 #, c-format
 msgid "Cannot define export symbol: %s\n"
 msgstr ""
 
-#: config/tc-hppa.c:4834
+#: config/tc-hppa.c:6504
 #, c-format
 msgid "Using ENTRY rather than CODE in export directive for %s"
 msgstr ""
 
-#: config/tc-hppa.c:4935
+#: config/tc-hppa.c:6613
 #, c-format
 msgid "Undefined .EXPORT/.IMPORT argument (ignored): %s"
 msgstr ""
 
-#: config/tc-hppa.c:5017
+#: config/tc-hppa.c:6695
 msgid "Missing label name on .LABEL"
 msgstr ""
 
-#: config/tc-hppa.c:5022
+#: config/tc-hppa.c:6700
 msgid "extra .LABEL arguments ignored."
 msgstr ""
 
-#: config/tc-hppa.c:5037
+#: config/tc-hppa.c:6717
 msgid "The .LEAVE pseudo-op is not supported"
 msgstr ""
 
-#: config/tc-hppa.c:5070
+#: config/tc-hppa.c:6756
 msgid "Unrecognized .LEVEL argument\n"
 msgstr ""
 
-#: config/tc-hppa.c:5104
+#: config/tc-hppa.c:6792
 #, c-format
 msgid "Cannot define static symbol: %s\n"
 msgstr ""
 
-#: config/tc-hppa.c:5137
+#: config/tc-hppa.c:6827
 msgid "Nested procedures"
 msgstr ""
 
-#: config/tc-hppa.c:5147
+#: config/tc-hppa.c:6837
 msgid "Cannot allocate unwind descriptor\n"
 msgstr ""
 
-#: config/tc-hppa.c:5242
+#: config/tc-hppa.c:6935
 msgid "misplaced .procend"
 msgstr ""
 
-#: config/tc-hppa.c:5245
+#: config/tc-hppa.c:6938
 msgid "Missing .callinfo for this procedure"
 msgstr ""
 
-#: config/tc-hppa.c:5248
+#: config/tc-hppa.c:6941
 msgid "Missing .EXIT for a .ENTRY"
 msgstr ""
 
-#: config/tc-hppa.c:5348
+#: config/tc-hppa.c:6980
+msgid "Not in a space.\n"
+msgstr ""
+
+#: config/tc-hppa.c:6983
+msgid "Not in a subspace.\n"
+msgstr ""
+
+#: config/tc-hppa.c:7073
 msgid "Invalid .SPACE argument"
 msgstr ""
 
-#: config/tc-hppa.c:5396
+#: config/tc-hppa.c:7121
 msgid "Can't change spaces within a procedure definition. Ignored"
 msgstr ""
 
-#: config/tc-hppa.c:5523
+#: config/tc-hppa.c:7248
 #, c-format
 msgid "Undefined space: '%s' Assuming space number = 0."
 msgstr ""
 
-#: config/tc-hppa.c:5565
+#: config/tc-hppa.c:7272
 msgid "Must be in a space before changing or declaring subspaces.\n"
 msgstr ""
 
-#: config/tc-hppa.c:5569
+#: config/tc-hppa.c:7276
 msgid "Can't change subspaces within a procedure definition. Ignored"
 msgstr ""
 
-#: config/tc-hppa.c:5605
+#: config/tc-hppa.c:7311
 msgid "Parameters of an existing subspace can't be modified"
 msgstr ""
 
-#: config/tc-hppa.c:5658
+#: config/tc-hppa.c:7362
 msgid "Alignment must be a power of 2"
 msgstr ""
 
-#: config/tc-hppa.c:5700
+#: config/tc-hppa.c:7404
 msgid "FIRST not supported as a .SUBSPACE argument"
 msgstr ""
 
-#: config/tc-hppa.c:5702
+#: config/tc-hppa.c:7406
 msgid "Invalid .SUBSPACE argument"
 msgstr ""
 
-#: config/tc-hppa.c:5742
-msgid "Ignoring subspace decl due to ELF BFD bugs."
-msgstr ""
-
-#: config/tc-hppa.c:5905
+#: config/tc-hppa.c:7589
 #, c-format
 msgid "Internal error: Unable to find containing space for %s."
 msgstr ""
 
-#: config/tc-hppa.c:5946
+#: config/tc-hppa.c:7630
 #, c-format
 msgid "Out of memory: could not allocate new space chain entry: %s\n"
 msgstr ""
 
-#: config/tc-hppa.c:6032
+#: config/tc-hppa.c:7716
 #, c-format
 msgid "Out of memory: could not allocate new subspace chain entry: %s\n"
 msgstr ""
 
-#: config/tc-hppa.c:6688
+#: config/tc-hppa.c:8383
 #, c-format
 msgid "Symbol '%s' could not be created."
 msgstr ""
 
-#: config/tc-hppa.c:6692
+#: config/tc-hppa.c:8387
 msgid "No memory for symbol name."
 msgstr ""
 
-#: config/tc-i386.c:502
+#: config/tc-i386.c:509
 msgid "same type of prefix used twice"
 msgstr ""
 
-#: config/tc-i386.c:536
+#: config/tc-i386.c:552
 msgid "Bad argument to syntax directive."
 msgstr ""
 
-#: config/tc-i386.c:619 config/tc-m68k.c:3750
+#: config/tc-i386.c:636 config/tc-m68k.c:3750
 #, c-format
 msgid "Internal Error:  Can't hash %s: %s"
 msgstr ""
 
-#: config/tc-i386.c:851
+#: config/tc-i386.c:866
 msgid "Unknown"
 msgstr ""
 
-#: config/tc-i386.c:899 config/tc-i386.c:4360 config/tc-m68k.c:772
+#: config/tc-i386.c:914 config/tc-i386.c:4407 config/tc-m68k.c:772
 #, c-format
 msgid "Can not do %d byte pc-relative relocation"
 msgstr ""
 
-#: config/tc-i386.c:909 config/tc-i386.c:4374 config/tc-m68k.c:779
+#: config/tc-i386.c:924 config/tc-i386.c:4421 config/tc-m68k.c:779
 #, c-format
 msgid "Can not do %d byte relocation"
 msgstr ""
 
-#: config/tc-i386.c:1010 config/tc-i386.c:1096
+#: config/tc-i386.c:1030 config/tc-i386.c:1113
 #, c-format
 msgid "no such 386 instruction: `%s'"
 msgstr ""
 
-#: config/tc-i386.c:1019
+#: config/tc-i386.c:1039
 #, c-format
 msgid "invalid character %s in mnemonic"
 msgstr ""
 
-#: config/tc-i386.c:1026
+#: config/tc-i386.c:1046
 msgid "expecting prefix; got nothing"
 msgstr ""
 
-#: config/tc-i386.c:1028
+#: config/tc-i386.c:1048
 msgid "expecting mnemonic; got nothing"
 msgstr ""
 
-#: config/tc-i386.c:1046
+#: config/tc-i386.c:1066
 #, c-format
 msgid "redundant %s prefix"
 msgstr ""
 
-#: config/tc-i386.c:1105
+#: config/tc-i386.c:1122
 #, c-format
 msgid "expecting string instruction after `%s'"
 msgstr ""
 
-#: config/tc-i386.c:1128
+#: config/tc-i386.c:1145
 #, c-format
 msgid "invalid character %s before operand %d"
 msgstr ""
 
-#: config/tc-i386.c:1142
+#: config/tc-i386.c:1159
 #, c-format
 msgid "unbalanced parenthesis in operand %d."
 msgstr ""
 
-#: config/tc-i386.c:1145
+#: config/tc-i386.c:1162
 #, c-format
 msgid "unbalanced brackets in operand %d."
 msgstr ""
 
-#: config/tc-i386.c:1154
+#: config/tc-i386.c:1171
 #, c-format
 msgid "invalid character %s in operand %d"
 msgstr ""
 
-#: config/tc-i386.c:1181
+#: config/tc-i386.c:1198
 #, c-format
 msgid "spurious operands; (%d operands/instruction max)"
 msgstr ""
 
-#: config/tc-i386.c:1202
+#: config/tc-i386.c:1219
 msgid "expecting operand after ','; got nothing"
 msgstr ""
 
-#: config/tc-i386.c:1207
+#: config/tc-i386.c:1224
 msgid "expecting operand before ','; got nothing"
 msgstr ""
 
 #. we found no match
-#: config/tc-i386.c:1434
+#: config/tc-i386.c:1461
 #, c-format
 msgid "suffix or operands invalid for `%s'"
 msgstr ""
 
+#: config/tc-i386.c:1469
+#, c-format
+msgid "Indirect %s without `*'"
+msgstr ""
+
 #. Warn them that a data or address size prefix doesn't affect
 #. assembly of the next line of code.
-#: config/tc-i386.c:1443
+#: config/tc-i386.c:1476
 #, c-format
 msgid "stand-alone `%s' prefix"
 msgstr ""
 
-#: config/tc-i386.c:1467 config/tc-i386.c:1482
+#: config/tc-i386.c:1511 config/tc-i386.c:1526
 msgid "`%s' operand %d must use `%%es' segment"
 msgstr ""
 
-#: config/tc-i386.c:1548 config/tc-i386.c:1589 config/tc-i386.c:1616
+#: config/tc-i386.c:1593 config/tc-i386.c:1634 config/tc-i386.c:1661
 msgid "using `%%%s' instead of `%%%s' due to `%c' suffix"
 msgstr ""
 
-#: config/tc-i386.c:1561 config/tc-i386.c:1578 config/tc-i386.c:1605
+#: config/tc-i386.c:1606 config/tc-i386.c:1623 config/tc-i386.c:1650
 msgid "`%%%s' not allowed with `%s%c'"
 msgstr ""
 
-#: config/tc-i386.c:1645 config/tc-i386.c:1665
+#: config/tc-i386.c:1694 config/tc-i386.c:1714
 msgid "no instruction mnemonic suffix given; can't determine immediate size"
 msgstr ""
 
-#: config/tc-i386.c:1690
+#: config/tc-i386.c:1739
 msgid ""
 "no instruction mnemonic suffix given and no register operands; can't size "
 "instruction"
 msgstr ""
 
 #. reversed arguments on faddp, fsubp, etc.
-#: config/tc-i386.c:1803
+#: config/tc-i386.c:1841
 msgid "translating to `%s %%%s,%%%s'"
 msgstr ""
 
 #. extraneous `l' suffix on fp insn
-#: config/tc-i386.c:1810
+#: config/tc-i386.c:1848
 msgid "translating to `%s %%%s'"
 msgstr ""
 
-#: config/tc-i386.c:2022
+#: config/tc-i386.c:2063
 msgid "you can't `pop %%cs'"
 msgstr ""
 
-#. UnixWare fsub no args is alias for fsubp, fadd -> faddp, etc
-#: config/tc-i386.c:2053
+#. UnixWare fsub no args is alias for fsubp, fadd -> faddp, etc.
+#: config/tc-i386.c:2094
 #, c-format
 msgid "translating to `%sp'"
 msgstr ""
 
-#: config/tc-i386.c:2084 config/tc-i386.c:2187 config/tc-i386.c:2247
+#: config/tc-i386.c:2143 config/tc-i386.c:2205 config/tc-i386.c:2247
 msgid "skipping prefixes on this instruction"
 msgstr ""
 
-#: config/tc-i386.c:2104 config/tc-i386.c:2211 config/tc-i386.c:2260
+#: config/tc-i386.c:2262
 msgid "16-bit jump out of range"
 msgstr ""
 
-#: config/tc-i386.c:2206
+#: config/tc-i386.c:2271
 #, c-format
-msgid "`%s' only takes byte displacement; %ld shortened to %d"
+msgid "can't handle non absolute segment in `%s'"
 msgstr ""
 
-#: config/tc-i386.c:2269
+#: config/tc-i386.c:2379 config/tc-i386.c:2429
 #, c-format
-msgid "can't handle non absolute segment in `%s'"
+msgid "%ld shortened to %ld"
 msgstr ""
 
-#: config/tc-i386.c:2527
+#: config/tc-i386.c:2499
 msgid "Only 1 or 2 immediate operands are allowed"
 msgstr ""
 
-#: config/tc-i386.c:2558 config/tc-i386.c:2788
+#: config/tc-i386.c:2531 config/tc-i386.c:2755
 msgid "GOT relocations not supported in 16 bit mode"
 msgstr ""
 
-#: config/tc-i386.c:2579 config/tc-i386.c:2809
+#: config/tc-i386.c:2552 config/tc-i386.c:2776
 msgid "Bad reloc specifier in expression"
 msgstr ""
 
-#: config/tc-i386.c:2597 config/tc-i386.c:2843
+#: config/tc-i386.c:2570 config/tc-i386.c:2810
 #, c-format
 msgid "Ignoring junk `%s' after expression"
 msgstr ""
 
 #. missing or bad expr becomes absolute 0
-#: config/tc-i386.c:2604
+#: config/tc-i386.c:2577
 #, c-format
 msgid "Missing or invalid immediate expression `%s' taken as 0"
 msgstr ""
 
-#: config/tc-i386.c:2639 config/tc-i386.c:2862
+#: config/tc-i386.c:2607 config/tc-i386.c:2853
+#, c-format
+msgid "Unimplemented segment %s in operand"
+msgstr ""
+
+#: config/tc-i386.c:2609 config/tc-i386.c:2855
 #, c-format
 msgid "Unimplemented segment type %d in operand"
 msgstr ""
 
-#: config/tc-i386.c:2682
+#: config/tc-i386.c:2653
 #, c-format
 msgid "expecting scale factor of 1, 2, 4, or 8: got `%s'"
 msgstr ""
 
-#: config/tc-i386.c:2688
+#: config/tc-i386.c:2659
 #, c-format
 msgid "scale factor of %d without an index register"
 msgstr ""
 
-#: config/tc-i386.c:3037 config/tc-i386.c:3043 config/tc-i386.c:3052
+#. missing or bad expr becomes absolute 0
+#: config/tc-i386.c:2821
+#, c-format
+msgid "Missing or invalid displacement expression `%s' taken as 0"
+msgstr ""
+
+#: config/tc-i386.c:3035 config/tc-i386.c:3041 config/tc-i386.c:3050
 #, c-format
 msgid "bad segment name `%s'"
 msgstr ""
 
-#: config/tc-i386.c:3218 config/tc-i386.c:3473
+#: config/tc-i386.c:3108
 #, c-format
-msgid "too many memory references for `%s'"
+msgid "`%s' is not a valid base/index expression"
 msgstr ""
 
-#: config/tc-i386.c:3329 config/tc-i386.c:3342 config/tc-i386.c:3654
-#: config/tc-i386.c:3667
+#: config/tc-i386.c:3112
 #, c-format
 msgid "`%s' is not a valid %s bit base/index expression"
 msgstr ""
 
-#: config/tc-i386.c:3426
+#: config/tc-i386.c:3133 config/tc-i386.c:3487
+#, c-format
+msgid "too many memory references for `%s'"
+msgstr ""
+
+#: config/tc-i386.c:3219 config/tc-i386.c:3354 config/tc-i386.c:3457
+#: config/tc-i386.c:3572 config/tc-i386.c:3608
+#, c-format
+msgid "bad register name `%s'"
+msgstr ""
+
+#: config/tc-i386.c:3433
 #, c-format
 msgid "bad memory operand `%s'"
 msgstr ""
 
-#: config/tc-i386.c:3441
+#: config/tc-i386.c:3448
 #, c-format
 msgid "Junk `%s' after register"
 msgstr ""
 
-#: config/tc-i386.c:3582
+#: config/tc-i386.c:3465
+msgid "Immediate operand illegal with absolute jump"
+msgstr ""
+
+#: config/tc-i386.c:3565
 #, c-format
 msgid "expecting `,' or `)' after index register in `%s'"
 msgstr ""
 
-#: config/tc-i386.c:3599
+#: config/tc-i386.c:3587
 #, c-format
 msgid "expecting `)' after scale factor in `%s'"
 msgstr ""
 
-#: config/tc-i386.c:3606
+#: config/tc-i386.c:3594
 #, c-format
 msgid "expecting index register or scale factor after `,'; got '%c'"
 msgstr ""
 
-#: config/tc-i386.c:3613
+#: config/tc-i386.c:3601
 #, c-format
 msgid "expecting `,' or `)' after base register in `%s'"
 msgstr ""
 
 #. it's not a memory operand; argh!
-#: config/tc-i386.c:3676
+#: config/tc-i386.c:3641
 #, c-format
 msgid "invalid char %s beginning operand %d `%s'"
 msgstr ""
 
-#: config/tc-i386.c:4095
+#: config/tc-i386.c:4099
 msgid "Bad call to md_atof ()"
 msgstr ""
 
-#: config/tc-i386.c:4156 config/tc-i386.c:4169
-#, c-format
-msgid "bad register name `%s'"
+#: config/tc-i386.c:4250
+msgid "  -m\t\t\t  do long jump\n"
 msgstr ""
 
-#: config/tc-i386.c:4223
-msgid "-m\t\t\tdo long jump\n"
+#: config/tc-i386.c:4253
+msgid ""
+"  -V\t\t\t  print assembler version number\n"
+"  -k\t\t\t  ignored\n"
+"  -Qy, -Qn\t\t  ignored\n"
+"  -q\t\t\t  ignored\n"
+"  -s\t\t\t  ignored\n"
 msgstr ""
 
-#: config/tc-i386.c:4263
+#: config/tc-i386.c:4307
 msgid "GOT already in symbol table"
 msgstr ""
 
-#: config/tc-i386.c:4409 config/tc-mcore.c:2130 config/tc-sh.c:2421
+#: config/tc-i386.c:4456 config/tc-mcore.c:2421 config/tc-pj.c:586
+#: config/tc-sh.c:2998
 #, c-format
 msgid "Cannot represent relocation type %s"
 msgstr ""
@@ -2863,7 +3162,7 @@ msgstr ""
 msgid "Unknown temporary pseudo register"
 msgstr ""
 
-#: config/tc-i860.c:183 config/tc-mips.c:1013 config/tc-sparc.c:696
+#: config/tc-i860.c:183 config/tc-mips.c:1059
 #, c-format
 msgid "internal error: can't hash `%s': %s\n"
 msgstr ""
@@ -2890,7 +3189,7 @@ msgstr ""
 msgid "Illegal operands"
 msgstr ""
 
-#: config/tc-i860.c:749 config/tc-sparc.c:2338
+#: config/tc-i860.c:749 config/tc-sparc.c:2634
 msgid "bad segment"
 msgstr ""
 
@@ -2972,10 +3271,6 @@ msgstr ""
 msgid "improper number of operands.  expecting %d, got %d"
 msgstr ""
 
-#: config/tc-i960.c:786 config/tc-m32r.c:1239
-msgid "Bad call to md_atof()"
-msgstr ""
-
 #: config/tc-i960.c:876
 #, c-format
 msgid "Fixup of %ld too large for field width of %d"
@@ -3074,115 +3369,202 @@ msgstr ""
 msgid "Redefining leafproc %s"
 msgstr ""
 
-#: config/tc-i960.c:2667
+#: config/tc-i960.c:2669
 msgid "should have two operands"
 msgstr ""
 
-#: config/tc-i960.c:2677
+#: config/tc-i960.c:2679
 msgid "'entry_num' must be absolute number in [0,31]"
 msgstr ""
 
-#: config/tc-i960.c:2686
+#: config/tc-i960.c:2688
 #, c-format
 msgid "Redefining entrynum for sysproc %s"
 msgstr ""
 
-#: config/tc-i960.c:2797
+#: config/tc-i960.c:2799
 msgid "architecture of opcode conflicts with that of earlier instruction(s)"
 msgstr ""
 
-#: config/tc-i960.c:2818
+#: config/tc-i960.c:2820
 msgid "big endian mode is not supported"
 msgstr ""
 
-#: config/tc-i960.c:2820
+#: config/tc-i960.c:2822
 #, c-format
 msgid "ignoring unrecognized .endian type `%s'"
 msgstr ""
 
-#: config/tc-i960.c:3123
+#: config/tc-i960.c:3104
 #, c-format
 msgid "leafproc symbol '%s' undefined"
 msgstr ""
 
-#: config/tc-i960.c:3133
+#: config/tc-i960.c:3114
 #, c-format
 msgid "Warning: making leafproc entries %s and %s both global\n"
 msgstr ""
 
-#: config/tc-i960.c:3242
+#: config/tc-i960.c:3223
 msgid "option --link-relax is only supported in b.out format"
 msgstr ""
 
-#: config/tc-i960.c:3285
+#: config/tc-i960.c:3266
 msgid "callj to difference of two symbols"
 msgstr ""
 
-#: config/tc-m32r.c:191
+#. Pretend that we do not recognise this option.
+#: config/tc-m32r.c:218
+msgid "Unrecognised option: -hidden"
+msgstr ""
+
+#: config/tc-m32r.c:251
 msgid " M32R specific command line options:\n"
 msgstr ""
 
-#: config/tc-m32r.c:194
+#: config/tc-m32r.c:253
+msgid "  -m32rx                  support the extended m32rx instruction set\n"
+msgstr ""
+
+#: config/tc-m32r.c:255
+msgid "  -O                      try to combine instructions in parallel\n"
+msgstr ""
+
+#: config/tc-m32r.c:258
+msgid ""
+"  -warn-explicit-parallel-conflicts     warn when parallel instructions\n"
+msgstr ""
+
+#: config/tc-m32r.c:260
+msgid "                                         violate contraints\n"
+msgstr ""
+
+#: config/tc-m32r.c:262
+msgid "  -no-warn-explicit-parallel-conflicts  do not warn when parallel\n"
+msgstr ""
+
+#: config/tc-m32r.c:264
+msgid ""
+"                                         instructions violate contraints\n"
+msgstr ""
+
+#: config/tc-m32r.c:266
+msgid ""
+"  -Wp                     synonym for -warn-explicit-parallel-conflicts\n"
+msgstr ""
+
+#: config/tc-m32r.c:268
+msgid ""
+"  -Wnp                    synonym for -no-warn-explicit-parallel-conflicts\n"
+msgstr ""
+
+#: config/tc-m32r.c:271
 msgid ""
 "  -warn-unmatched-high    warn when an (s)high reloc has no matching low "
 "reloc\n"
 msgstr ""
 
-#: config/tc-m32r.c:196
+#: config/tc-m32r.c:273
 msgid "  -no-warn-unmatched-high do not warn about missing low relocs\n"
 msgstr ""
 
-#: config/tc-m32r.c:198
+#: config/tc-m32r.c:275
 msgid "  -Wuh                    synonym for -warn-unmatched-high\n"
 msgstr ""
 
-#: config/tc-m32r.c:200
+#: config/tc-m32r.c:277
 msgid "  -Wnuh                   synonym for -no-warn-unmatched-high\n"
 msgstr ""
 
-#: config/tc-m32r.c:204
+#: config/tc-m32r.c:281
 msgid "  -relax                 create linker relaxable code\n"
 msgstr ""
 
-#: config/tc-m32r.c:206
+#: config/tc-m32r.c:283
 msgid "  -cpu-desc              provide runtime cpu description file\n"
 msgstr ""
 
-#: config/tc-m32r.c:331 read.c:2755 read.c:4824
+#: config/tc-m32r.c:678
+msgid "Instructions write to the same destination register."
+msgstr ""
+
+#: config/tc-m32r.c:686
+msgid "Instructions do not use parallel execution pipelines."
+msgstr ""
+
+#: config/tc-m32r.c:693
+msgid "Instructions share the same execution pipeline"
+msgstr ""
+
+#: config/tc-m32r.c:762 config/tc-m32r.c:848
 #, c-format
-msgid "symbol `%s' already defined"
+msgid "not a 16 bit instruction '%s'"
+msgstr ""
+
+#: config/tc-m32r.c:769 config/tc-m32r.c:855 config/tc-m32r.c:1010
+#, c-format
+msgid "unknown instruction '%s'"
+msgstr ""
+
+#: config/tc-m32r.c:777 config/tc-m32r.c:862 config/tc-m32r.c:1017
+#, c-format
+msgid "instruction '%s' is for the M32RX only"
+msgstr ""
+
+#: config/tc-m32r.c:785 config/tc-m32r.c:870
+#, c-format
+msgid "instruction '%s' cannot be executed in parallel."
+msgstr ""
+
+#: config/tc-m32r.c:832 config/tc-m32r.c:895 config/tc-m32r.c:1067
+msgid "internal error: lookup/get operands failed"
+msgstr ""
+
+#: config/tc-m32r.c:880
+#, c-format
+msgid "'%s': only the NOP instruction can be issued in parallel on the m32r"
+msgstr ""
+
+#: config/tc-m32r.c:909
+#, c-format
+msgid ""
+"%s: output of 1st instruction is the same as an input to 2nd instruction - "
+"is this intentional ?"
 msgstr ""
 
-#: config/tc-m32r.c:630 config/tc-ppc.c:1336 config/tc-ppc.c:3540 read.c:1368
+#: config/tc-m32r.c:913
+#, c-format
+msgid ""
+"%s: output of 2nd instruction is the same as an input to 1st instruction - "
+"is this intentional ?"
+msgstr ""
+
+#: config/tc-m32r.c:1228 config/tc-ppc.c:1337 config/tc-ppc.c:3547 read.c:1359
 msgid "Expected comma after symbol-name: rest of line ignored."
 msgstr ""
 
-#: config/tc-m32r.c:639
+#: config/tc-m32r.c:1237
 #, c-format
 msgid ".SCOMMon length (%ld.) <0! Ignored."
 msgstr ""
 
-#: config/tc-m32r.c:653 config/tc-ppc.c:1358 config/tc-ppc.c:2267
-#: config/tc-ppc.c:3564
+#: config/tc-m32r.c:1251 config/tc-ppc.c:1359 config/tc-ppc.c:2266
+#: config/tc-ppc.c:3571
 msgid "ignoring bad alignment"
 msgstr ""
 
-#: config/tc-m32r.c:679 config/tc-ppc.c:1369 config/tc-ppc.c:3576 read.c:1388
-#: read.c:2104
+#: config/tc-m32r.c:1277 config/tc-ppc.c:1370 config/tc-ppc.c:3583 read.c:1379
+#: read.c:2102
 #, c-format
 msgid "Ignoring attempt to re-define symbol `%s'."
 msgstr ""
 
-#: config/tc-m32r.c:688
+#: config/tc-m32r.c:1286
 #, c-format
 msgid "Length of .scomm \"%s\" is already %ld. Not changed to %ld."
 msgstr ""
 
-#: config/tc-m32r.c:932
-msgid "Addend to unresolved symbol not on word boundary."
-msgstr ""
-
-#: config/tc-m32r.c:1161
+#: config/tc-m32r.c:1759
 msgid "Unmatched high/shigh reloc"
 msgstr ""
 
@@ -3200,7 +3582,7 @@ msgstr ""
 msgid "Can not do %d byte pic relocation"
 msgstr ""
 
-#: config/tc-m68k.c:885 config/tc-mips.c:11148
+#: config/tc-m68k.c:885 config/tc-mips.c:11223
 #, c-format
 msgid "Cannot make %s relocation PC relative"
 msgstr ""
@@ -3627,7 +4009,7 @@ msgstr ""
 msgid "Relaxation should never occur"
 msgstr ""
 
-#: config/tc-m88k.c:1267 config/tc-sparc.c:3025 read.c:1961
+#: config/tc-m88k.c:1267 config/tc-sparc.c:3353 read.c:1954
 #, c-format
 msgid "BSS length (%d.) <0! Ignored."
 msgstr ""
@@ -3637,503 +4019,531 @@ msgstr ""
 msgid "Ignoring attempt to re-define symbol %s."
 msgstr ""
 
-#: config/tc-mcore.c:402
+#: config/tc-mcore.c:509
 #, c-format
 msgid "register expected, but saw '%.6s'"
 msgstr ""
 
-#: config/tc-mcore.c:486
+#: config/tc-mcore.c:593
 #, c-format
 msgid "control register expected, but saw '%.6s'"
 msgstr ""
 
-#: config/tc-mcore.c:645
+#: config/tc-mcore.c:631
+msgid "bad/missing psr specifier"
+msgstr ""
+
+#: config/tc-mcore.c:792
 msgid "more than 65K literal pools"
 msgstr ""
 
-#: config/tc-mcore.c:699
+#: config/tc-mcore.c:846
 msgid "missing ']'"
 msgstr ""
 
-#: config/tc-mcore.c:739
+#: config/tc-mcore.c:886
 msgid "operand must be a constant"
 msgstr ""
 
-#: config/tc-mcore.c:741
+#: config/tc-mcore.c:888
 #, c-format
 msgid "operand must be absolute in range %d..%d, not %d"
 msgstr ""
 
-#: config/tc-mcore.c:779
+#: config/tc-mcore.c:926
 msgid "operand must be a multiple of 4"
 msgstr ""
 
-#: config/tc-mcore.c:786
+#: config/tc-mcore.c:933
 msgid "operand must be a multiple of 2"
 msgstr ""
 
-#: config/tc-mcore.c:800 config/tc-mcore.c:1301 config/tc-mcore.c:1355
+#: config/tc-mcore.c:947 config/tc-mcore.c:1459 config/tc-mcore.c:1513
 msgid "base register expected"
 msgstr ""
 
-#: config/tc-mcore.c:849
+#: config/tc-mcore.c:996
 #, c-format
 msgid "unknown opcode \"%s\""
 msgstr ""
 
-#: config/tc-mcore.c:892
+#: config/tc-mcore.c:1039
 msgid "invalid register: r15 illegal"
 msgstr ""
 
-#: config/tc-mcore.c:951 config/tc-mcore.c:990 config/tc-mcore.c:1009
-#: config/tc-mcore.c:1028 config/tc-mcore.c:1055 config/tc-mcore.c:1084
-#: config/tc-mcore.c:1121 config/tc-mcore.c:1156 config/tc-mcore.c:1175
-#: config/tc-mcore.c:1194 config/tc-mcore.c:1226 config/tc-mcore.c:1248
-#: config/tc-mcore.c:1304 config/tc-mcore.c:1358 config/tc-mcore.c:1393
-#: config/tc-mcore.c:1447 config/tc-mcore.c:1469 config/tc-mcore.c:1492
+#: config/tc-mcore.c:1087 config/tc-mcore.c:1663
+msgid "M340 specific opcode used when assembling for M210"
+msgstr ""
+
+#: config/tc-mcore.c:1105 config/tc-mcore.c:1144 config/tc-mcore.c:1163
+#: config/tc-mcore.c:1182 config/tc-mcore.c:1209 config/tc-mcore.c:1238
+#: config/tc-mcore.c:1275 config/tc-mcore.c:1310 config/tc-mcore.c:1329
+#: config/tc-mcore.c:1348 config/tc-mcore.c:1380 config/tc-mcore.c:1405
+#: config/tc-mcore.c:1462 config/tc-mcore.c:1516 config/tc-mcore.c:1552
+#: config/tc-mcore.c:1610 config/tc-mcore.c:1632 config/tc-mcore.c:1655
 msgid "second operand missing"
 msgstr ""
 
-#: config/tc-mcore.c:966
+#: config/tc-mcore.c:1120
 msgid "destination register must be r1"
 msgstr ""
 
-#: config/tc-mcore.c:987
+#: config/tc-mcore.c:1141
 msgid "source register must be r1"
 msgstr ""
 
-#: config/tc-mcore.c:1050 config/tc-mcore.c:1107
+#: config/tc-mcore.c:1204 config/tc-mcore.c:1261
 msgid "immediate is not a power of two"
 msgstr ""
 
-#: config/tc-mcore.c:1078
+#: config/tc-mcore.c:1232
 msgid "translating bgeni to movi"
 msgstr ""
 
-#: config/tc-mcore.c:1115
+#: config/tc-mcore.c:1269
 msgid "translating mgeni to movi"
 msgstr ""
 
-#: config/tc-mcore.c:1147
+#: config/tc-mcore.c:1301
 msgid "translating bmaski to movi"
 msgstr ""
 
-#: config/tc-mcore.c:1221
+#: config/tc-mcore.c:1375
 #, c-format
 msgid "displacement too large (%d)"
 msgstr ""
 
-#: config/tc-mcore.c:1235
+#: config/tc-mcore.c:1389
 msgid "Invalid register: r0 and r15 illegal"
 msgstr ""
 
-#: config/tc-mcore.c:1262
+#: config/tc-mcore.c:1420
 msgid "bad starting register: r0 and r15 invalid"
 msgstr ""
 
-#: config/tc-mcore.c:1275
+#: config/tc-mcore.c:1433
 msgid "ending register must be r15"
 msgstr ""
 
-#: config/tc-mcore.c:1295
+#: config/tc-mcore.c:1453
 msgid "bad base register: must be r0"
 msgstr ""
 
-#: config/tc-mcore.c:1313
+#: config/tc-mcore.c:1471
 msgid "first register must be r4"
 msgstr ""
 
-#: config/tc-mcore.c:1324
+#: config/tc-mcore.c:1482
 msgid "last register must be r7"
 msgstr ""
 
-#: config/tc-mcore.c:1361
+#: config/tc-mcore.c:1519
 msgid "reg-reg expected"
 msgstr ""
 
-#: config/tc-mcore.c:1466
+#: config/tc-mcore.c:1629
 msgid "second operand must be 1"
 msgstr ""
 
-#: config/tc-mcore.c:1487
+#: config/tc-mcore.c:1650
 msgid "zero used as immediate value"
 msgstr ""
 
-#: config/tc-mcore.c:1498
+#: config/tc-mcore.c:1677
+msgid "duplicated psr bit specifier"
+msgstr ""
+
+#: config/tc-mcore.c:1683
+msgid "`af' must appear alone"
+msgstr ""
+
+#: config/tc-mcore.c:1690
 #, c-format
 msgid "unimplemented opcode \"%s\""
 msgstr ""
 
-#: config/tc-mcore.c:1568 config/tc-w65.c:856
+#: config/tc-mcore.c:1699
+#, c-format
+msgid "ignoring operands: %s "
+msgstr ""
+
+#: config/tc-mcore.c:1768 config/tc-w65.c:856
 msgid "Bad call to MD_NTOF()"
 msgstr ""
 
-#: config/tc-mcore.c:1631
+#: config/tc-mcore.c:1841
+#, c-format
+msgid "unrecognised cpu type '%s'"
+msgstr ""
+
+#: config/tc-mcore.c:1860
 msgid ""
 "MCORE specific options:\n"
 "  -{no-}jsri2bsr\t  {dis}able jsri to bsr transformation (def: dis)\n"
-"  -{no-}sifilter\t  {dis}able silicon filter behavior (def: dis)"
+"  -{no-}sifilter\t  {dis}able silicon filter behavior (def: dis)\n"
+"  -cpu=[210|340]          select CPU type\n"
+"  -EB                     assemble for a big endian system (default)\n"
+"  -EL                     assemble for a little endian system\n"
 msgstr ""
 
-#: config/tc-mcore.c:1647
+#: config/tc-mcore.c:1879
 msgid "failed sanity check: short_jump"
 msgstr ""
 
-#: config/tc-mcore.c:1658
+#: config/tc-mcore.c:1890
 msgid "failed sanity check: long_jump"
 msgstr ""
 
-#: config/tc-mcore.c:1685
+#: config/tc-mcore.c:1917
 #, c-format
 msgid "odd displacement at %x"
 msgstr ""
 
-#: config/tc-mcore.c:1839
+#: config/tc-mcore.c:2105
 msgid "unknown"
 msgstr ""
 
-#: config/tc-mcore.c:1844 config/tc-ns32k.c:2281
-msgid "<unknown>"
-msgstr ""
-
-#: config/tc-mcore.c:1870
+#: config/tc-mcore.c:2136
 #, c-format
 msgid "odd distance branch (0x%x bytes)"
 msgstr ""
 
-#: config/tc-mcore.c:1874
+#: config/tc-mcore.c:2140
 #, c-format
 msgid "pcrel for branch to %s too far (0x%x)"
 msgstr ""
 
-#: config/tc-mcore.c:1885
+#: config/tc-mcore.c:2159
 #, c-format
 msgid "pcrel for lrw/jmpi/jsri to %s too far (0x%x)"
 msgstr ""
 
-#: config/tc-mcore.c:1894
+#: config/tc-mcore.c:2170
 #, c-format
 msgid "pcrel for loopt too far (0x%x)"
 msgstr ""
 
-#: config/tc-mcore.c:2112
+#: config/tc-mcore.c:2402
 #, c-format
 msgid "Can not do %d byte %srelocation"
 msgstr ""
 
-#: config/tc-mcore.c:2114
+#: config/tc-mcore.c:2404
 msgid "pc-relative"
 msgstr ""
 
-#: config/tc-mips.c:960
+#: config/tc-mips.c:860
+msgid "-G not supported in this configuration."
+msgstr ""
+
+#: config/tc-mips.c:1005
 msgid "trap exception not supported at ISA 1"
 msgstr ""
 
-#: config/tc-mips.c:1000
+#: config/tc-mips.c:1046
 msgid "Could not set architecture and machine"
 msgstr ""
 
-#: config/tc-mips.c:1039
+#: config/tc-mips.c:1085
 #, c-format
 msgid "internal: can't hash `%s': %s"
 msgstr ""
 
-#: config/tc-mips.c:1047
+#: config/tc-mips.c:1093
 #, c-format
 msgid "internal error: bad mips16 opcode: %s %s\n"
 msgstr ""
 
-#: config/tc-mips.c:1216
+#: config/tc-mips.c:1262
 #, c-format
 msgid "returned from mips_ip(%s) insn_opcode = 0x%x\n"
 msgstr ""
 
-#: config/tc-mips.c:1739 config/tc-mips.c:11279
+#: config/tc-mips.c:1816 config/tc-mips.c:11354
 msgid "extended instruction in delay slot"
 msgstr ""
 
-#: config/tc-mips.c:1761 config/tc-mips.c:1768
+#: config/tc-mips.c:1838 config/tc-mips.c:1845
 #, c-format
 msgid "jump to misaligned address (0x%lx)"
 msgstr ""
 
-#: config/tc-mips.c:2419 config/tc-mips.c:2782
+#: config/tc-mips.c:2495 config/tc-mips.c:2838
 msgid "Macro instruction expanded into multiple instructions"
 msgstr ""
 
-#: config/tc-mips.c:2835
+#: config/tc-mips.c:2891
 msgid "unsupported large constant"
 msgstr ""
 
-#: config/tc-mips.c:2837
+#: config/tc-mips.c:2893
 #, c-format
 msgid "Instruction %s requires absolute expression"
 msgstr ""
 
-#: config/tc-mips.c:2983
+#: config/tc-mips.c:3039
 msgid "Number larger than 32 bits"
 msgstr ""
 
-#: config/tc-mips.c:3004
+#: config/tc-mips.c:3060
 msgid "Number larger than 64 bits"
 msgstr ""
 
-#: config/tc-mips.c:3270 config/tc-mips.c:3342 config/tc-mips.c:5021
-#: config/tc-mips.c:5072 config/tc-mips.c:5608 config/tc-mips.c:5671
+#: config/tc-mips.c:3326 config/tc-mips.c:3398 config/tc-mips.c:5077
+#: config/tc-mips.c:5128 config/tc-mips.c:5664 config/tc-mips.c:5727
 msgid "PIC code offset overflow (max 16 signed bits)"
 msgstr ""
 
-#: config/tc-mips.c:3581
+#: config/tc-mips.c:3637
 #, c-format
 msgid "Branch %s is always false (nop)"
 msgstr ""
 
-#: config/tc-mips.c:3586
+#: config/tc-mips.c:3642
 #, c-format
 msgid "Branch likely %s is always false"
 msgstr ""
 
-#: config/tc-mips.c:3593 config/tc-mips.c:3667 config/tc-mips.c:3770
-#: config/tc-mips.c:3825 config/tc-mips.c:6707 config/tc-mips.c:6716
-#: config/tc-mips.c:6724 config/tc-mips.c:6833
+#: config/tc-mips.c:3649 config/tc-mips.c:3723 config/tc-mips.c:3826
+#: config/tc-mips.c:3881 config/tc-mips.c:6764 config/tc-mips.c:6773
+#: config/tc-mips.c:6781 config/tc-mips.c:6890
 msgid "Unsupported large constant"
 msgstr ""
 
 #. result is always true
-#: config/tc-mips.c:3629
+#: config/tc-mips.c:3685
 #, c-format
 msgid "Branch %s is always true"
 msgstr ""
 
-#: config/tc-mips.c:3901 config/tc-mips.c:4008
+#: config/tc-mips.c:3957 config/tc-mips.c:4064
 msgid "Divide by zero."
 msgstr ""
 
-#: config/tc-mips.c:4592
+#: config/tc-mips.c:4648
 msgid "MIPS PIC call to register other than $25"
 msgstr ""
 
-#: config/tc-mips.c:4597 config/tc-mips.c:4709
+#: config/tc-mips.c:4653 config/tc-mips.c:4765
 msgid "No .cprestore pseudo-op used in PIC code"
 msgstr ""
 
-#: config/tc-mips.c:4782 config/tc-mips.c:4871 config/tc-mips.c:5359
-#: config/tc-mips.c:5400 config/tc-mips.c:5418 config/tc-mips.c:6046
-#: config/tc-mips.c:7054
+#: config/tc-mips.c:4838 config/tc-mips.c:4927 config/tc-mips.c:5415
+#: config/tc-mips.c:5456 config/tc-mips.c:5474 config/tc-mips.c:6103
 msgid "opcode not supported on this processor"
 msgstr ""
 
-#: config/tc-mips.c:5877 config/tc-mips.c:6601
+#: config/tc-mips.c:5934 config/tc-mips.c:6658
 msgid "Macro used $at after \".set noat\""
 msgstr ""
 
-#: config/tc-mips.c:6017 config/tc-mips.c:6035
+#: config/tc-mips.c:6074 config/tc-mips.c:6092
 msgid "rotate count too large"
 msgstr ""
 
-#: config/tc-mips.c:6086
+#: config/tc-mips.c:6143
 #, c-format
 msgid "Instruction %s: result is always false"
 msgstr ""
 
-#: config/tc-mips.c:6255
+#: config/tc-mips.c:6312
 #, c-format
 msgid "Instruction %s: result is always true"
 msgstr ""
 
-#: config/tc-mips.c:6394 config/tc-mips.c:6421 config/tc-mips.c:6493
-#: config/tc-mips.c:6518
+#: config/tc-mips.c:6451 config/tc-mips.c:6478 config/tc-mips.c:6550
+#: config/tc-mips.c:6575
 msgid "operand overflow"
 msgstr ""
 
 #. FIXME: Check if this is one of the itbl macros, since they
 #. are added dynamically.
-#: config/tc-mips.c:6597
+#: config/tc-mips.c:6654
 #, c-format
 msgid "Macro %s not implemented yet"
 msgstr ""
 
-#: config/tc-mips.c:6867
+#: config/tc-mips.c:6924
 #, c-format
 msgid "internal: bad mips opcode (mask error): %s %s"
 msgstr ""
 
-#: config/tc-mips.c:6919
+#: config/tc-mips.c:6976
 #, c-format
 msgid "internal: bad mips opcode (unknown operand type `%c'): %s %s"
 msgstr ""
 
-#: config/tc-mips.c:6926
+#: config/tc-mips.c:6983
 #, c-format
 msgid "internal: bad mips opcode (bits 0x%lx undefined): %s %s"
 msgstr ""
 
-#: config/tc-mips.c:7059
+#: config/tc-mips.c:7091
 #, c-format
-msgid "opcode requires -mips%d or greater"
+msgid "opcode not supported on this processor: %d (MIPS%d)"
 msgstr ""
 
-#: config/tc-mips.c:7127
+#: config/tc-mips.c:7161
 #, c-format
 msgid "Improper shift amount (%ld)"
 msgstr ""
 
-#: config/tc-mips.c:7154 config/tc-mips.c:8272 config/tc-mips.c:8387
+#: config/tc-mips.c:7188 config/tc-mips.c:8305 config/tc-mips.c:8420
 #, c-format
 msgid "Invalid value for `%s' (%lu)"
 msgstr ""
 
-#: config/tc-mips.c:7172
+#: config/tc-mips.c:7206
 #, c-format
 msgid "Illegal break code (%ld)"
 msgstr ""
 
-#: config/tc-mips.c:7186
+#: config/tc-mips.c:7220
 #, c-format
 msgid "Illegal lower break code (%ld)"
 msgstr ""
 
-#: config/tc-mips.c:7199
+#: config/tc-mips.c:7233
 #, c-format
 msgid "Illegal syscall code (%ld)"
 msgstr ""
 
-#: config/tc-mips.c:7211
+#: config/tc-mips.c:7245
 #, c-format
 msgid "Coproccesor code > 25 bits (%ld)"
 msgstr ""
 
-#: config/tc-mips.c:7225
+#: config/tc-mips.c:7259
 #, c-format
 msgid "Invalidate performance regster (%ld)"
 msgstr ""
 
-#: config/tc-mips.c:7261
+#: config/tc-mips.c:7295
 #, c-format
 msgid "Invalid register number (%d)"
 msgstr ""
 
-#: config/tc-mips.c:7422
+#: config/tc-mips.c:7455
 #, c-format
 msgid "Invalid float register number (%d)"
 msgstr ""
 
-#: config/tc-mips.c:7432
+#: config/tc-mips.c:7465
 #, c-format
 msgid "Float register should be even, was %d"
 msgstr ""
 
-#: config/tc-mips.c:7484 config/tc-mips.c:7716 config/tc-mips.c:7755
+#: config/tc-mips.c:7517 config/tc-mips.c:7749 config/tc-mips.c:7788
 msgid "absolute expression required"
 msgstr ""
 
-#: config/tc-mips.c:7545
+#: config/tc-mips.c:7578
 #, c-format
 msgid "Bad floating point constant: %s"
 msgstr ""
 
-#: config/tc-mips.c:7662
+#: config/tc-mips.c:7695
 msgid "Can't use floating point insn in this section"
 msgstr ""
 
-#: config/tc-mips.c:7718
+#: config/tc-mips.c:7751
 msgid "16 bit expression not in range 0..65535"
 msgstr ""
 
-#: config/tc-mips.c:7757
+#: config/tc-mips.c:7790
 msgid "16 bit expression not in range -32768..32767"
 msgstr ""
 
-#: config/tc-mips.c:7829
+#: config/tc-mips.c:7862
 msgid "lui expression not in range 0..65535"
 msgstr ""
 
-#: config/tc-mips.c:7853
+#: config/tc-mips.c:7886
 #, c-format
 msgid "invalid condition code register $fcc%d"
 msgstr ""
 
-#: config/tc-mips.c:7861
+#: config/tc-mips.c:7894
 #, c-format
 msgid "bad char = '%c'\n"
 msgstr ""
 
-#: config/tc-mips.c:7874 config/tc-mips.c:8412
+#: config/tc-mips.c:7907 config/tc-mips.c:8445
 msgid "illegal operands"
 msgstr ""
 
-#: config/tc-mips.c:7941
+#: config/tc-mips.c:7974
 msgid "unrecognized opcode"
 msgstr ""
 
-#: config/tc-mips.c:8050
+#: config/tc-mips.c:8083
 #, c-format
 msgid "invalid register number (%d)"
 msgstr ""
 
-#: config/tc-mips.c:8131
+#: config/tc-mips.c:8164
 msgid "used $at without \".set noat\""
 msgstr ""
 
-#: config/tc-mips.c:8306
+#: config/tc-mips.c:8339
 msgid "can't parse register list"
 msgstr ""
 
-#: config/tc-mips.c:8340 config/tc-mips.c:8370
+#: config/tc-mips.c:8373 config/tc-mips.c:8403
 msgid "invalid register list"
 msgstr ""
 
-#: config/tc-mips.c:8537
+#: config/tc-mips.c:8570
 msgid "extended operand requested but not required"
 msgstr ""
 
-#: config/tc-mips.c:8539
+#: config/tc-mips.c:8572
 msgid "invalid unextended operand value"
 msgstr ""
 
-#: config/tc-mips.c:8567
+#: config/tc-mips.c:8600
 msgid "operand value out of range for instruction"
 msgstr ""
 
-#: config/tc-mips.c:9008
+#: config/tc-mips.c:9051
 #, c-format
 msgid "ignoring invalid leading 'v' in -mcpu=%s switch"
 msgstr ""
 
-#: config/tc-mips.c:9014
+#: config/tc-mips.c:9057
 #, c-format
 msgid "invalid architecture -mcpu=%s"
 msgstr ""
 
-#: config/tc-mips.c:9064
+#: config/tc-mips.c:9107
 msgid "-G may not be used with embedded PIC code"
 msgstr ""
 
-#: config/tc-mips.c:9076
+#: config/tc-mips.c:9119
 msgid "-call_shared is supported only for ELF format"
 msgstr ""
 
-#: config/tc-mips.c:9082 config/tc-mips.c:10093 config/tc-mips.c:10261
+#: config/tc-mips.c:9125 config/tc-mips.c:10166 config/tc-mips.c:10334
 msgid "-G may not be used with SVR4 PIC code"
 msgstr ""
 
-#: config/tc-mips.c:9091
+#: config/tc-mips.c:9134
 msgid "-non_shared is supported only for ELF format"
 msgstr ""
 
-#: config/tc-mips.c:9107
+#: config/tc-mips.c:9150
 msgid "-G is not supported for this configuration"
 msgstr ""
 
-#: config/tc-mips.c:9112
+#: config/tc-mips.c:9155
 msgid "-G may not be used with SVR4 or embedded PIC code"
 msgstr ""
 
-#: config/tc-mips.c:9136
+#: config/tc-mips.c:9179
 msgid "No compiled in support for 64 bit object file format"
 msgstr ""
 
-#: config/tc-mips.c:9197
+#: config/tc-mips.c:9269
 msgid ""
 "MIPS options:\n"
 "-membedded-pic\t\tgenerate embedded position independent code\n"
@@ -4144,7 +4554,7 @@ msgid ""
 "\t\t\timplicitly with the gp register [default 8]\n"
 msgstr ""
 
-#: config/tc-mips.c:9205
+#: config/tc-mips.c:9277
 msgid ""
 "-mips1\t\t\tgenerate MIPS ISA I instructions\n"
 "-mips2\t\t\tgenerate MIPS ISA II instructions\n"
@@ -4153,20 +4563,20 @@ msgid ""
 "-mcpu=CPU\t\tgenerate code for CPU, where CPU is one of:\n"
 msgstr ""
 
-#: config/tc-mips.c:9231
+#: config/tc-mips.c:9303
 msgid ""
 "-mCPU\t\t\tequivalent to -mcpu=CPU.\n"
 "-no-mCPU\t\tdon't generate code specific to CPU.\n"
 "\t\t\tFor -mCPU and -no-mCPU, CPU must be one of:\n"
 msgstr ""
 
-#: config/tc-mips.c:9244
+#: config/tc-mips.c:9316
 msgid ""
 "-mips16\t\t\tgenerate mips16 instructions\n"
 "-no-mips16\t\tdo not generate mips16 instructions\n"
 msgstr ""
 
-#: config/tc-mips.c:9247
+#: config/tc-mips.c:9319
 msgid ""
 "-O0\t\t\tremove unneeded NOPs, do not swap branches\n"
 "-O\t\t\tremove unneeded NOPs and swap branches\n"
@@ -4174,7 +4584,7 @@ msgid ""
 "--break, --no-trap\tbreak exception on div by 0 and mult overflow\n"
 msgstr ""
 
-#: config/tc-mips.c:9253
+#: config/tc-mips.c:9325
 msgid ""
 "-KPIC, -call_shared\tgenerate SVR4 position independent code\n"
 "-non_shared\t\tdo not generate position independent code\n"
@@ -4183,372 +4593,401 @@ msgid ""
 "-64\t\t\tcreate 64 bit object file\n"
 msgstr ""
 
-#: config/tc-mips.c:9310
+#: config/tc-mips.c:9382
 #, c-format
 msgid "Unsupported reloc size %d"
 msgstr ""
 
-#: config/tc-mips.c:9413
+#: config/tc-mips.c:9485
 msgid "Unmatched %%hi reloc"
 msgstr ""
 
-#: config/tc-mips.c:9518
+#: config/tc-mips.c:9590
 msgid "Invalid PC relative reloc"
 msgstr ""
 
-#: config/tc-mips.c:9617 config/tc-sparc.c:2617 config/tc-sparc.c:2624
-#: config/tc-sparc.c:2631 config/tc-sparc.c:2638 config/tc-sparc.c:2645
-#: config/tc-sparc.c:2654 config/tc-sparc.c:2665 config/tc-sparc.c:2691
-#: config/tc-sparc.c:2714 write.c:972 write.c:1036
+#: config/tc-mips.c:9690 config/tc-sparc.c:2915 config/tc-sparc.c:2922
+#: config/tc-sparc.c:2929 config/tc-sparc.c:2936 config/tc-sparc.c:2943
+#: config/tc-sparc.c:2952 config/tc-sparc.c:2963 config/tc-sparc.c:2989
+#: config/tc-sparc.c:3017 write.c:971 write.c:1035
 msgid "relocation overflow"
 msgstr ""
 
-#: config/tc-mips.c:9633
+#: config/tc-mips.c:9706
 #, c-format
 msgid "Branch to odd address (%lx)"
 msgstr ""
 
-#: config/tc-mips.c:9788
+#: config/tc-mips.c:9861
 #, c-format
 msgid "%08lx  UNDEFINED\n"
 msgstr ""
 
-#: config/tc-mips.c:9854
+#: config/tc-mips.c:9927
 msgid "Alignment negative: 0 assumed."
 msgstr ""
 
-#: config/tc-mips.c:9942
+#: config/tc-mips.c:10015
 msgid "No read only data section in this object file format"
 msgstr ""
 
-#: config/tc-mips.c:9965
+#: config/tc-mips.c:10038
 msgid "Global pointers not supported; recompile -G 0"
 msgstr ""
 
-#: config/tc-mips.c:10051
+#: config/tc-mips.c:10124
 #, c-format
 msgid "%s: no such section"
 msgstr ""
 
-#: config/tc-mips.c:10088
+#: config/tc-mips.c:10161
 #, c-format
 msgid ".option pic%d not supported"
 msgstr ""
 
-#: config/tc-mips.c:10099
+#: config/tc-mips.c:10172
 #, c-format
 msgid "Unrecognized option \"%s\""
 msgstr ""
 
-#: config/tc-mips.c:10162
+#: config/tc-mips.c:10235
 msgid "`noreorder' must be set before `nomacro'"
 msgstr ""
 
-#: config/tc-mips.c:10197
+#: config/tc-mips.c:10270
 msgid "unknown ISA level"
 msgstr ""
 
-#: config/tc-mips.c:10220
+#: config/tc-mips.c:10293
 msgid ".set pop with no .set push"
 msgstr ""
 
-#: config/tc-mips.c:10244
+#: config/tc-mips.c:10317
 #, c-format
 msgid "Tried to set unrecognized symbol: %s\n"
 msgstr ""
 
-#: config/tc-mips.c:10294
+#: config/tc-mips.c:10367
 msgid ".cpload not in noreorder section"
 msgstr ""
 
-#: config/tc-mips.c:10376
+#: config/tc-mips.c:10449
 msgid "Unsupported use of .gpword"
 msgstr ""
 
-#: config/tc-mips.c:10513
+#: config/tc-mips.c:10586
 msgid "expected `$'"
 msgstr ""
 
-#: config/tc-mips.c:10521
+#: config/tc-mips.c:10594
 msgid "Bad register number"
 msgstr ""
 
-#: config/tc-mips.c:10537
+#: config/tc-mips.c:10610
 msgid "Unrecognized register name"
 msgstr ""
 
-#: config/tc-mips.c:10734
+#: config/tc-mips.c:10809
 msgid "unsupported PC relative reference to different section"
 msgstr ""
 
-#: config/tc-mips.c:10843
+#: config/tc-mips.c:10918
 msgid "unsupported relocation"
 msgstr ""
 
-#: config/tc-mips.c:10926
+#: config/tc-mips.c:11001
 msgid "AT used after \".set noat\" or macro used after \".set nomacro\""
 msgstr ""
 
-#: config/tc-mips.c:10989
+#: config/tc-mips.c:11064
 msgid "Double check fx_r_type in tc-mips.c:tc_gen_reloc"
 msgstr ""
 
-#: config/tc-mips.c:11470
+#: config/tc-mips.c:11575
 msgid "missing `.end' at end of assembly"
 msgstr ""
 
-#: config/tc-mips.c:11485
+#: config/tc-mips.c:11590
 msgid "Expected simple number."
 msgstr ""
 
-#: config/tc-mips.c:11511
+#: config/tc-mips.c:11616
 #, c-format
 msgid " *input_line_pointer == '%c' 0x%02x\n"
 msgstr ""
 
-#: config/tc-mips.c:11513
+#: config/tc-mips.c:11618
 msgid "Invalid number"
 msgstr ""
 
-#: config/tc-mips.c:11568
+#: config/tc-mips.c:11673
 msgid ".end not in text section"
 msgstr ""
 
-#: config/tc-mips.c:11572
+#: config/tc-mips.c:11677
 msgid ".end directive without a preceding .ent directive."
 msgstr ""
 
-#: config/tc-mips.c:11581
+#: config/tc-mips.c:11686
 msgid ".end symbol does not match .ent symbol."
 msgstr ""
 
-#: config/tc-mips.c:11584
+#: config/tc-mips.c:11689
 msgid ".end directive missing or unknown symbol"
 msgstr ""
 
-#: config/tc-mips.c:11659
+#: config/tc-mips.c:11764
 msgid ".ent or .aent not in text section."
 msgstr ""
 
-#: config/tc-mips.c:11662
+#: config/tc-mips.c:11767
 msgid "missing `.end'"
 msgstr ""
 
-#: config/tc-mips.c:11695 ecoff.c:3226
+#: config/tc-mips.c:11800 ecoff.c:3227
 msgid ".frame outside of .ent"
 msgstr ""
 
-#: config/tc-mips.c:11706 ecoff.c:3237
+#: config/tc-mips.c:11811 ecoff.c:3238
 msgid "Bad .frame directive"
 msgstr ""
 
-#: config/tc-mips.c:11736
+#: config/tc-mips.c:11841
 msgid ".mask/.fmask outside of .ent"
 msgstr ""
 
-#: config/tc-mips.c:11743
+#: config/tc-mips.c:11848
 msgid "Bad .mask/.fmask directive"
 msgstr ""
 
-#: config/tc-mn10200.c:314
+#: config/tc-mn10200.c:313
 msgid ""
 "MN10200 options:\n"
 "none yet\n"
 msgstr ""
 
-#: config/tc-mn10200.c:789 config/tc-mn10300.c:750 config/tc-ppc.c:1613
+#: config/tc-mn10200.c:788 config/tc-mn10300.c:912 config/tc-ppc.c:1614
 #: config/tc-v850.c:1691
 #, c-format
 msgid "Unrecognized opcode: `%s'"
 msgstr ""
 
-#: config/tc-mn10300.c:333
+#: config/tc-mn10300.c:495
 msgid ""
 "MN10300 options:\n"
 "none yet\n"
 msgstr ""
 
-#: config/tc-mn10300.c:768
+#: config/tc-mn10300.c:930
 msgid "Invalid opcode/operands"
 msgstr ""
 
-#: config/tc-mn10300.c:1099
+#: config/tc-mn10300.c:1406
 msgid "Invalid register specification."
 msgstr ""
 
-#: config/tc-ns32k.c:443
+#: config/tc-ns32k.c:444
 msgid "Invalid syntax in PC-relative addressing mode"
 msgstr ""
 
-#: config/tc-ns32k.c:467
+#: config/tc-ns32k.c:468
 msgid "Invalid syntax in External addressing mode"
 msgstr ""
 
-#: config/tc-ns32k.c:536
+#: config/tc-ns32k.c:537
 msgid "Invalid syntax in Memory Relative addressing mode"
 msgstr ""
 
-#: config/tc-ns32k.c:603
+#: config/tc-ns32k.c:604
 msgid "Invalid scaled-indexed mode, use (b,w,d,q)"
 msgstr ""
 
-#: config/tc-ns32k.c:608
+#: config/tc-ns32k.c:609
 msgid "Syntax in scaled-indexed mode, use [Rn:m] where n=[0..7] m={b,w,d,q}"
 msgstr ""
 
-#: config/tc-ns32k.c:614
+#: config/tc-ns32k.c:615
 msgid "Scaled-indexed addressing mode combined with scaled-index"
 msgstr ""
 
-#: config/tc-ns32k.c:623
+#: config/tc-ns32k.c:624
 msgid "Invalid or illegal addressing mode combined with scaled-index"
 msgstr ""
 
-#: config/tc-ns32k.c:730
+#: config/tc-ns32k.c:731
 msgid "Premature end of suffix -- Defaulting to d"
 msgstr ""
 
-#: config/tc-ns32k.c:743
+#: config/tc-ns32k.c:744
 msgid "Bad suffix after ':' use {b|w|d} Defaulting to d"
 msgstr ""
 
-#: config/tc-ns32k.c:784
+#: config/tc-ns32k.c:785
 msgid "Very short instr to option, ie you can't do it on a NULLstr"
 msgstr ""
 
-#: config/tc-ns32k.c:828
+#: config/tc-ns32k.c:829
 msgid "No such entry in list. (cpu/mmu register)"
 msgstr ""
 
-#: config/tc-ns32k.c:869
+#: config/tc-ns32k.c:870
 msgid "Internal consistency error.  check ns32k-opcode.h"
 msgstr ""
 
-#: config/tc-ns32k.c:890
+#: config/tc-ns32k.c:891
 msgid "Address of immediate operand"
 msgstr ""
 
-#: config/tc-ns32k.c:891
+#: config/tc-ns32k.c:892
 msgid "Invalid immediate write operand."
 msgstr ""
 
-#: config/tc-ns32k.c:1018
+#: config/tc-ns32k.c:1019
 msgid "Bad opcode-table-option, check in file ns32k-opcode.h"
 msgstr ""
 
-#: config/tc-ns32k.c:1047
+#: config/tc-ns32k.c:1048
 msgid "No such opcode"
 msgstr ""
 
-#: config/tc-ns32k.c:1115
+#: config/tc-ns32k.c:1116
 msgid "Bad suffix, defaulting to d"
 msgstr ""
 
-#: config/tc-ns32k.c:1137
+#: config/tc-ns32k.c:1138
 msgid "Too many operands passed to instruction"
 msgstr ""
 
 #. check error in default
-#: config/tc-ns32k.c:1148
+#: config/tc-ns32k.c:1149
 msgid "Wrong numbers of operands in default, check ns32k-opcodes.h"
 msgstr ""
 
-#: config/tc-ns32k.c:1153
+#: config/tc-ns32k.c:1154
 msgid "Wrong number of operands"
 msgstr ""
 
-#: config/tc-ns32k.c:1272
+#: config/tc-ns32k.c:1273
 msgid "iif convert internal pcrel/binary"
 msgstr ""
 
-#: config/tc-ns32k.c:1288
+#: config/tc-ns32k.c:1289
 msgid "Bignum too big for long"
 msgstr ""
 
-#: config/tc-ns32k.c:1363
+#: config/tc-ns32k.c:1364
 msgid "iif convert internal pcrel/pointer"
 msgstr ""
 
-#: config/tc-ns32k.c:1368
+#: config/tc-ns32k.c:1369
 msgid "Internal logic error in iif.iifP[n].type"
 msgstr ""
 
 #. We cant relax this case
-#: config/tc-ns32k.c:1402
+#: config/tc-ns32k.c:1403
 msgid "Can't relax difference"
 msgstr ""
 
-#: config/tc-ns32k.c:1451
+#: config/tc-ns32k.c:1452
 msgid "Displacement to large for :d"
 msgstr ""
 
-#: config/tc-ns32k.c:1462
+#: config/tc-ns32k.c:1463
 msgid "Internal logic error in iif.iifP[].type"
 msgstr ""
 
-#: config/tc-ns32k.c:1517
+#: config/tc-ns32k.c:1518
 #, c-format
 msgid "Can not do %d byte pc-relative relocation for storage type %d"
 msgstr ""
 
-#: config/tc-ns32k.c:1520
+#: config/tc-ns32k.c:1521
 #, c-format
 msgid "Can not do %d byte relocation for storage type %d"
 msgstr ""
 
-#: config/tc-ns32k.c:1552
+#: config/tc-ns32k.c:1553
 #, c-format
 msgid "Can't hash %s: %s"
 msgstr ""
 
-#: config/tc-ns32k.c:1636
+#: config/tc-ns32k.c:1637
 msgid "Byte displacement out of range.  line number not valid"
 msgstr ""
 
-#: config/tc-ns32k.c:1645
+#: config/tc-ns32k.c:1646
 msgid "Word displacement out of range.  line number not valid"
 msgstr ""
 
-#: config/tc-ns32k.c:1659
+#: config/tc-ns32k.c:1660
 msgid "Double word displacement out of range"
 msgstr ""
 
-#: config/tc-ns32k.c:1679
+#: config/tc-ns32k.c:1680
 #, c-format
 msgid "Internal logic error.  line %s, file \"%s\""
 msgstr ""
 
-#: config/tc-ns32k.c:1727
+#: config/tc-ns32k.c:1728
 #, c-format
 msgid "Internal logic error. line %s, file \"%s\""
 msgstr ""
 
-#: config/tc-ns32k.c:1838
+#: config/tc-ns32k.c:1839
 msgid "Bit field out of range"
 msgstr ""
 
-#: config/tc-ns32k.c:2087
+#: config/tc-ns32k.c:2088
 #, c-format
 msgid "invalid architecture option -m%s"
 msgstr ""
 
-#: config/tc-ns32k.c:2103
+#: config/tc-ns32k.c:2104
 msgid ""
 "NS32K options:\n"
 "-m32032 | -m32532\tselect variant of NS32K architecture\n"
 msgstr ""
 
-#: config/tc-ns32k.c:2282
+#: config/tc-ns32k.c:2284
 #, c-format
 msgid "Cannot find relocation type for symbol %s, code %d"
 msgstr ""
 
-#: config/tc-ppc.c:834
+#: config/tc-pj.c:70 config/tc-pj.c:78
+msgid "confusing relocation expressions"
+msgstr ""
+
+#: config/tc-pj.c:172
+msgid "can't have relocation for ipush"
+msgstr ""
+
+#: config/tc-pj.c:282
+#, c-format
+msgid "unknown opcode %s"
+msgstr ""
+
+#: config/tc-pj.c:431
+msgid ""
+"PJ options:\n"
+"-little\t\t\tgenerate little endian code\n"
+"-big\t\t\tgenerate big endian code\n"
+msgstr ""
+
+#: config/tc-pj.c:472 config/tc-sh.c:2570 config/tc-sh.c:2577
+#: config/tc-sh.c:2584 config/tc-sh.c:2591
+msgid "pcrel too far"
+msgstr ""
+
+#: config/tc-pj.c:541 config/tc-sh.c:2663
+msgid "offset out of range"
+msgstr ""
+
+#: config/tc-ppc.c:835
 #, c-format
 msgid "invalid switch -m%s"
 msgstr ""
 
-#: config/tc-ppc.c:871
+#: config/tc-ppc.c:872
 msgid ""
 "PowerPC options:\n"
 "-u\t\t\tignored\n"
@@ -4565,7 +5004,7 @@ msgid ""
 "-mno-regnames\t\tDo not allow symbolic names for registers\n"
 msgstr ""
 
-#: config/tc-ppc.c:886
+#: config/tc-ppc.c:887
 msgid ""
 "-mrelocatable\t\tsupport for GCC's -mrelocatble option\n"
 "-mrelocatable-lib\tsupport for GCC's -mrelocatble-lib option\n"
@@ -4579,239 +5018,305 @@ msgid ""
 "-Qy, -Qn\t\tignored\n"
 msgstr ""
 
-#: config/tc-ppc.c:921
+#: config/tc-ppc.c:922
 #, c-format
 msgid "Unknown default cpu = %s, os = %s"
 msgstr ""
 
-#: config/tc-ppc.c:946
+#: config/tc-ppc.c:947
 msgid "Neither Power nor PowerPC opcodes were selected."
 msgstr ""
 
-#: config/tc-ppc.c:994
+#: config/tc-ppc.c:995
 #, c-format
 msgid "Internal assembler error for instruction %s"
 msgstr ""
 
-#: config/tc-ppc.c:1013
+#: config/tc-ppc.c:1014
 #, c-format
 msgid "Internal assembler error for macro %s"
 msgstr ""
 
-#: config/tc-ppc.c:1223
+#: config/tc-ppc.c:1224
 msgid "identifier+constant@got means identifier@got+constant"
 msgstr ""
 
-#: config/tc-ppc.c:1277
+#: config/tc-ppc.c:1278
 #, c-format
 msgid "%s relocations do not fit in %d bytes\n"
 msgstr ""
 
-#: config/tc-ppc.c:1377
+#: config/tc-ppc.c:1378
 #, c-format
 msgid "Length of .lcomm \"%s\" is already %ld. Not changed to %ld."
 msgstr ""
 
-#: config/tc-ppc.c:1459
+#: config/tc-ppc.c:1460
 msgid "Relocation cannot be done when using -mrelocatable"
 msgstr ""
 
-#: config/tc-ppc.c:1540
+#: config/tc-ppc.c:1541
 #, c-format
 msgid "syntax error: invalid toc specifier `%s'"
 msgstr ""
 
-#: config/tc-ppc.c:1554
+#: config/tc-ppc.c:1555
 #, c-format
 msgid "syntax error: expected `]', found  `%c'"
 msgstr ""
 
-#: config/tc-ppc.c:1788
+#: config/tc-ppc.c:1790
 msgid "[tocv] symbol is not a toc symbol"
 msgstr ""
 
-#: config/tc-ppc.c:1799
+#: config/tc-ppc.c:1801
 msgid "Unimplemented toc32 expression modifier"
 msgstr ""
 
-#: config/tc-ppc.c:1804
+#: config/tc-ppc.c:1806
 msgid "Unimplemented toc64 expression modifier"
 msgstr ""
 
-#: config/tc-ppc.c:1808
+#: config/tc-ppc.c:1810
 #, c-format
 msgid "Unexpected return value [%d] from parse_toc_entry!\n"
 msgstr ""
 
-#: config/tc-ppc.c:1960
+#: config/tc-ppc.c:1963
 #, c-format
 msgid "syntax error; found `%c' but expected `%c'"
 msgstr ""
 
-#: config/tc-ppc.c:2068
+#: config/tc-ppc.c:2071
 msgid "wrong number of operands"
 msgstr ""
 
-#: config/tc-ppc.c:2124
+#: config/tc-ppc.c:2127
 msgid "Bad .section directive: want a,w,x,e in string"
 msgstr ""
 
-#: config/tc-ppc.c:2242
+#: config/tc-ppc.c:2241
 msgid "missing size"
 msgstr ""
 
-#: config/tc-ppc.c:2251
+#: config/tc-ppc.c:2250
 msgid "negative size"
 msgstr ""
 
-#: config/tc-ppc.c:2292
+#: config/tc-ppc.c:2291
 msgid "missing real symbol name"
 msgstr ""
 
-#: config/tc-ppc.c:2313
+#: config/tc-ppc.c:2312
 msgid "attempt to redefine symbol"
 msgstr ""
 
-#: config/tc-ppc.c:2544
+#: config/tc-ppc.c:2546
 msgid "The XCOFF file format does not support arbitrary sections"
 msgstr ""
 
-#: config/tc-ppc.c:2652 config/tc-ppc.c:3164 read.c:2950
+#: config/tc-ppc.c:2654 config/tc-ppc.c:3171 read.c:2976
 msgid "missing value"
 msgstr ""
 
-#: config/tc-ppc.c:2670
+#: config/tc-ppc.c:2672
 msgid "illegal .stabx expression; zero assumed"
 msgstr ""
 
-#: config/tc-ppc.c:2702
+#: config/tc-ppc.c:2704
 msgid "missing class"
 msgstr ""
 
-#: config/tc-ppc.c:2711
+#: config/tc-ppc.c:2713
 msgid "missing type"
 msgstr ""
 
-#: config/tc-ppc.c:2772
+#: config/tc-ppc.c:2774
 msgid "missing symbol name"
 msgstr ""
 
-#: config/tc-ppc.c:2944
+#: config/tc-ppc.c:2950
 msgid "nested .bs blocks"
 msgstr ""
 
-#: config/tc-ppc.c:2977
+#: config/tc-ppc.c:2983
 msgid ".es without preceding .bs"
 msgstr ""
 
-#: config/tc-ppc.c:3156
+#: config/tc-ppc.c:3163
 msgid "non-constant byte count"
 msgstr ""
 
-#: config/tc-ppc.c:3201
+#: config/tc-ppc.c:3208
 msgid ".tc not in .toc section"
 msgstr ""
 
-#: config/tc-ppc.c:3220
+#: config/tc-ppc.c:3227
 msgid ".tc with no label"
 msgstr ""
 
-#: config/tc-ppc.c:3295
+#: config/tc-ppc.c:3302
 msgid "No previous section to return to. Directive ignored."
 msgstr ""
 
 #. Section Contents
 #. unknown
-#: config/tc-ppc.c:3714
+#: config/tc-ppc.c:3721
 msgid "Unsupported section attribute -- 'a'"
 msgstr ""
 
-#: config/tc-ppc.c:3904
+#: config/tc-ppc.c:3911
 msgid "bad symbol suffix"
 msgstr ""
 
-#: config/tc-ppc.c:3995
+#: config/tc-ppc.c:4004
 msgid "Unrecognized symbol suffix"
 msgstr ""
 
-#: config/tc-ppc.c:4077
+#: config/tc-ppc.c:4086
 msgid "two .function pseudo-ops with no intervening .ef"
 msgstr ""
 
-#: config/tc-ppc.c:4089
+#: config/tc-ppc.c:4099
 msgid ".ef with no preceding .function"
 msgstr ""
 
-#: config/tc-ppc.c:4217
+#: config/tc-ppc.c:4227
 #, c-format
 msgid "warning: symbol %s has no csect"
 msgstr ""
 
-#: config/tc-ppc.c:4513
+#: config/tc-ppc.c:4528
 msgid "symbol in .toc does not match any .tc"
 msgstr ""
 
-#: config/tc-ppc.c:4810
+#: config/tc-ppc.c:4826
 msgid "unsupported relocation type"
 msgstr ""
 
-#: config/tc-ppc.c:4864
+#: config/tc-ppc.c:4880
 #, c-format
 msgid "cannot emit PC relative %s relocation against %s"
 msgstr ""
 
-#: config/tc-ppc.c:4869
+#: config/tc-ppc.c:4885
 #, c-format
 msgid "cannot emit PC relative %s relocation"
 msgstr ""
 
-#: config/tc-ppc.c:4931
+#: config/tc-ppc.c:4947
 msgid "must branch to an address a multiple of 4"
 msgstr ""
 
-#: config/tc-ppc.c:4935
+#: config/tc-ppc.c:4951
 #, c-format
 msgid "@local or @plt branch destination is too far away, %ld bytes"
 msgstr ""
 
-#: config/tc-ppc.c:4959
+#: config/tc-ppc.c:4975
 #, c-format
 msgid "Gas failure, reloc value %d\n"
 msgstr ""
 
-#: config/tc-sh.c:521
+#: config/tc-sh.c:671
 msgid "illegal register after @-"
 msgstr ""
 
-#: config/tc-sh.c:537
+#: config/tc-sh.c:687
 msgid "must be @(r0,...)"
 msgstr ""
 
-#: config/tc-sh.c:553
+#: config/tc-sh.c:703
 msgid "syntax error in @(r0,...)"
 msgstr ""
 
-#: config/tc-sh.c:585 config/tc-sh.c:590
+#: config/tc-sh.c:735 config/tc-sh.c:740
 msgid "syntax error in @(disp,[Rn, gbr, pc])"
 msgstr ""
 
-#: config/tc-sh.c:595
+#: config/tc-sh.c:745
 msgid "expecting )"
 msgstr ""
 
-#: config/tc-sh.c:604
+#: config/tc-sh.c:754
 msgid "illegal register after @"
 msgstr ""
 
-#: config/tc-sh.c:1228
+#: config/tc-sh.c:1256
+#, c-format
+msgid "Invalid register: 'r%d'"
+msgstr ""
+
+#: config/tc-sh.c:1392
+msgid "insn can't be combined with parallel processing insn"
+msgstr ""
+
+#: config/tc-sh.c:1399 config/tc-sh.c:1410
+msgid "multiple movx specifications"
+msgstr ""
+
+#: config/tc-sh.c:1404 config/tc-sh.c:1431
+msgid "multiple movy specifications"
+msgstr ""
+
+#: config/tc-sh.c:1412
+msgid "invalid movx address register"
+msgstr ""
+
+#: config/tc-sh.c:1418 config/tc-sh.c:1423
+msgid "invalid movx dsp register"
+msgstr ""
+
+#: config/tc-sh.c:1440 config/tc-sh.c:1445
+msgid "invalid movy dsp register"
+msgstr ""
+
+#: config/tc-sh.c:1449
+msgid "invalid movy address register"
+msgstr ""
+
+#: config/tc-sh.c:1455
+msgid "dsp immediate shift value not constant"
+msgstr ""
+
+#: config/tc-sh.c:1462 config/tc-sh.c:1475
+msgid "multiple parallel processing specifications"
+msgstr ""
+
+#: config/tc-sh.c:1468
+msgid "multiple condition specifications"
+msgstr ""
+
+#: config/tc-sh.c:1484
+msgid "insn cannot be combined with pmuls"
+msgstr ""
+
+#: config/tc-sh.c:1501
+msgid "bad padd / psub pmuls output operand"
+msgstr ""
+
+#: config/tc-sh.c:1511
+msgid "condition not followed by conditionalizable insn"
+msgstr ""
+
+#: config/tc-sh.c:1521
+msgid "unrecognized characters at end of parallel processing insn"
+msgstr ""
+
+#: config/tc-sh.c:1631
+#, c-format
+msgid "excess operands: '%s'"
+msgstr ""
+
+#: config/tc-sh.c:1777
 msgid ".uses pseudo-op seen when not relaxing"
 msgstr ""
 
-#: config/tc-sh.c:1234
+#: config/tc-sh.c:1783
 msgid "bad .uses format"
 msgstr ""
 
-#: config/tc-sh.c:1289
+#: config/tc-sh.c:1844
 msgid ""
 "SH options:\n"
 "-little\t\t\tgenerate little endian code\n"
@@ -4819,113 +5324,104 @@ msgid ""
 "-small\t\t\talign sections to 4 byte boundaries, not 16\n"
 msgstr ""
 
-#: config/tc-sh.c:1299 config/tc-w65.c:883
+#: config/tc-sh.c:1854 config/tc-w65.c:883
 msgid "call to tc_Nout_fix_to_chars \n"
 msgstr ""
 
-#: config/tc-sh.c:1385
+#: config/tc-sh.c:1940
 msgid ".uses does not refer to a local symbol in the same section"
 msgstr ""
 
-#: config/tc-sh.c:1404
+#: config/tc-sh.c:1959
 msgid "can't find fixup pointed to by .uses"
 msgstr ""
 
-#: config/tc-sh.c:1427
+#: config/tc-sh.c:1982
 msgid ".uses target does not refer to a local symbol in the same section"
 msgstr ""
 
-#: config/tc-sh.c:1524
+#: config/tc-sh.c:2079
 #, c-format
 msgid "at 0x%lx, displacement overflows 12-bit field"
 msgstr ""
 
-#: config/tc-sh.c:1527
+#: config/tc-sh.c:2082
 #, c-format
 msgid "at 0x%lx, displacement to defined symbol %s overflows 12-bit field"
 msgstr ""
 
-#: config/tc-sh.c:1531
+#: config/tc-sh.c:2086
 #, c-format
 msgid "at 0x%lx, displacement to undefined symbol %s overflows 12-bit field"
 msgstr ""
 
-#: config/tc-sh.c:1647
+#: config/tc-sh.c:2202
 #, c-format
 msgid "at 0x%lx, displacement overflows 8-bit field"
 msgstr ""
 
-#: config/tc-sh.c:1650
+#: config/tc-sh.c:2205
 #, c-format
 msgid "at 0x%lx, displacement to defined symbol %s overflows 8-bit field "
 msgstr ""
 
-#: config/tc-sh.c:1654
+#: config/tc-sh.c:2209
 #, c-format
 msgid "at 0x%lx, displacement to undefined symbol %s overflows 8-bit field "
 msgstr ""
 
-#: config/tc-sh.c:1707
+#: config/tc-sh.c:2262
 #, c-format
 msgid "overflow in branch to %s; converted into longer instruction sequence"
 msgstr ""
 
-#: config/tc-sh.c:1782 config/tc-sh.c:1810 config/tc-sparc.c:3436
-#: config/tc-sparc.c:3455
+#: config/tc-sh.c:2337 config/tc-sh.c:2365 config/tc-sparc.c:3892
+#: config/tc-sparc.c:3911
 msgid "misaligned data"
 msgstr ""
 
-#: config/tc-sh.c:1988 config/tc-sh.c:1995 config/tc-sh.c:2002
-#: config/tc-sh.c:2009
-msgid "pcrel too far"
-msgstr ""
-
-#: config/tc-sh.c:2073
+#: config/tc-sh.c:2655
 msgid "misaligned offset"
 msgstr ""
 
-#: config/tc-sh.c:2081
-msgid "offset out of range"
-msgstr ""
-
-#: config/tc-sparc.c:257
+#: config/tc-sparc.c:268
 msgid "Invalid default architecture, broken assembler."
 msgstr ""
 
-#: config/tc-sparc.c:261 config/tc-sparc.c:448
+#: config/tc-sparc.c:272 config/tc-sparc.c:463
 msgid "Bad opcode table, broken assembler."
 msgstr ""
 
-#: config/tc-sparc.c:427
+#: config/tc-sparc.c:442
 #, c-format
 msgid "invalid architecture -xarch=%s"
 msgstr ""
 
-#: config/tc-sparc.c:442
+#: config/tc-sparc.c:457
 #, c-format
 msgid "invalid architecture -A%s"
 msgstr ""
 
-#: config/tc-sparc.c:509
+#: config/tc-sparc.c:524
 #, c-format
 msgid "No compiled in support for %d bit object file format"
 msgstr ""
 
-#: config/tc-sparc.c:546
+#: config/tc-sparc.c:561
 msgid "Unrecognized option following -K"
 msgstr ""
 
-#: config/tc-sparc.c:570
+#: config/tc-sparc.c:589
 msgid "SPARC options:\n"
 msgstr ""
 
-#: config/tc-sparc.c:578
+#: config/tc-sparc.c:597
 msgid ""
 "\n"
 "-xarch=v8plus | -xarch=v8plusa\n"
 msgstr ""
 
-#: config/tc-sparc.c:579
+#: config/tc-sparc.c:598
 msgid ""
 "\t\t\tspecify variant of SPARC architecture\n"
 "-bump\t\t\twarn when assembler switches architectures\n"
@@ -4933,34 +5429,34 @@ msgid ""
 "--enforce-aligned-data\tforce .long, etc., to be aligned correctly\n"
 msgstr ""
 
-#: config/tc-sparc.c:585
+#: config/tc-sparc.c:604
 msgid "-k\t\t\tgenerate PIC\n"
 msgstr ""
 
-#: config/tc-sparc.c:589
+#: config/tc-sparc.c:608
 msgid ""
 "-32\t\t\tcreate 32 bit object file\n"
 "-64\t\t\tcreate 64 bit object file\n"
 msgstr ""
 
-#: config/tc-sparc.c:592
+#: config/tc-sparc.c:611
 #, c-format
 msgid "\t\t\t[default is %d]\n"
 msgstr ""
 
-#: config/tc-sparc.c:594
+#: config/tc-sparc.c:613
 msgid ""
 "-TSO\t\t\tuse Total Store Ordering\n"
 "-PSO\t\t\tuse Partial Store Ordering\n"
 "-RMO\t\t\tuse Relaxed Memory Ordering\n"
 msgstr ""
 
-#: config/tc-sparc.c:598
+#: config/tc-sparc.c:617
 #, c-format
 msgid "\t\t\t[default is %s]\n"
 msgstr ""
 
-#: config/tc-sparc.c:600
+#: config/tc-sparc.c:619
 msgid ""
 "-KPIC\t\t\tgenerate PIC\n"
 "-V\t\t\tprint assembler version number\n"
@@ -4969,7 +5465,7 @@ msgid ""
 "-s\t\t\tignored\n"
 msgstr ""
 
-#: config/tc-sparc.c:608
+#: config/tc-sparc.c:627
 msgid ""
 "-EL\t\t\tgenerate code for a little endian machine\n"
 "-EB\t\t\tgenerate code for a big endian machine\n"
@@ -4977,168 +5473,222 @@ msgid ""
 "                        instructions and little endian data."
 msgstr ""
 
-#: config/tc-sparc.c:856
-msgid "Support for 64-bit arithmetic not compiled in."
+#: config/tc-sparc.c:744
+#, c-format
+msgid "Internal error: losing opcode: `%s' \"%s\"\n"
+msgstr ""
+
+#: config/tc-sparc.c:762
+#, c-format
+msgid "Internal error: can't find opcode `%s' for `%s'\n"
 msgstr ""
 
 #: config/tc-sparc.c:911
-msgid "FP branch in delay slot"
+msgid "Support for 64-bit arithmetic not compiled in."
 msgstr ""
 
-#: config/tc-sparc.c:927
-msgid "FP branch preceded by FP instruction; NOP inserted"
+#: config/tc-sparc.c:957
+msgid "set: number not in 0..4294967295 range"
 msgstr ""
 
-#: config/tc-sparc.c:947
-msgid "set: used with negative number"
+#: config/tc-sparc.c:964
+msgid "set: number not in -2147483648..4294967295 range"
 msgstr ""
 
-#: config/tc-sparc.c:949
-msgid "set: number larger than 4294967295"
+#: config/tc-sparc.c:1024
+msgid "setsw: number not in -2147483648..4294967295 range"
 msgstr ""
 
-#: config/tc-sparc.c:1000
+#: config/tc-sparc.c:1072
 msgid "setx: temporary register same as destination register"
 msgstr ""
 
-#: config/tc-sparc.c:1145
+#: config/tc-sparc.c:1142
+msgid "setx: illegal temporary register g0"
+msgstr ""
+
+#: config/tc-sparc.c:1239
+msgid "FP branch in delay slot"
+msgstr ""
+
+#: config/tc-sparc.c:1255
+msgid "FP branch preceded by FP instruction; NOP inserted"
+msgstr ""
+
+#: config/tc-sparc.c:1295
 msgid "failed special case insn sanity check"
 msgstr ""
 
-#: config/tc-sparc.c:1235
+#: config/tc-sparc.c:1386
 msgid ": invalid membar mask name"
 msgstr ""
 
-#: config/tc-sparc.c:1249
+#: config/tc-sparc.c:1400
 msgid ": invalid membar mask expression"
 msgstr ""
 
-#: config/tc-sparc.c:1254
+#: config/tc-sparc.c:1405
 msgid ": invalid membar mask number"
 msgstr ""
 
-#: config/tc-sparc.c:1272
+#: config/tc-sparc.c:1423
 msgid ": invalid prefetch function name"
 msgstr ""
 
-#: config/tc-sparc.c:1280
+#: config/tc-sparc.c:1431
 msgid ": invalid prefetch function expression"
 msgstr ""
 
-#: config/tc-sparc.c:1285
+#: config/tc-sparc.c:1436
 msgid ": invalid prefetch function number"
 msgstr ""
 
-#: config/tc-sparc.c:1313 config/tc-sparc.c:1325
+#: config/tc-sparc.c:1464 config/tc-sparc.c:1476
 msgid ": unrecognizable privileged register"
 msgstr ""
 
-#: config/tc-sparc.c:1349 config/tc-sparc.c:1366
+#: config/tc-sparc.c:1500 config/tc-sparc.c:1517
 msgid ": unrecognizable v9a ancillary state register"
 msgstr ""
 
-#: config/tc-sparc.c:1354
+#: config/tc-sparc.c:1505
 msgid ": rd on write only ancillary state register"
 msgstr ""
 
-#: config/tc-sparc.c:1390
+#: config/tc-sparc.c:1541
 msgid ": asr number must be between 16 and 31"
 msgstr ""
 
-#: config/tc-sparc.c:1398
+#: config/tc-sparc.c:1549
 msgid ": asr number must be between 0 and 31"
 msgstr ""
 
-#: config/tc-sparc.c:1408
+#: config/tc-sparc.c:1559
 msgid ": expecting %asrN"
 msgstr ""
 
-#: config/tc-sparc.c:1799
+#: config/tc-sparc.c:1887
+msgid "detected global register use not covered by .register pseudo-op"
+msgstr ""
+
+#: config/tc-sparc.c:1959
 msgid ": There are only 64 f registers; [0-63]"
 msgstr ""
 
-#: config/tc-sparc.c:1801 config/tc-sparc.c:1813
+#: config/tc-sparc.c:1961 config/tc-sparc.c:1973
 msgid ": There are only 32 f registers; [0-31]"
 msgstr ""
 
-#: config/tc-sparc.c:1982
+#: config/tc-sparc.c:2092 config/tc-sparc.c:2128
+msgid "Illegal operands: %%%s requires arguments in ()"
+msgstr ""
+
+#: config/tc-sparc.c:2140
+msgid ""
+"Illegal operands: Can't do arithmetics other than + and - involving %%%s()"
+msgstr ""
+
+#: config/tc-sparc.c:2249
+msgid "Illegal operands: Can't add non-constant expression to %%%s()"
+msgstr ""
+
+#: config/tc-sparc.c:2259
+msgid ""
+"Illegal operands: Can't do arithmetics involving %%%s() of a relocatable "
+"symbol"
+msgstr ""
+
+#: config/tc-sparc.c:2277
 msgid ": PC-relative operand can't be a constant"
 msgstr ""
 
-#: config/tc-sparc.c:2015
+#: config/tc-sparc.c:2310
 msgid ": invalid ASI name"
 msgstr ""
 
-#: config/tc-sparc.c:2023
+#: config/tc-sparc.c:2318
 msgid ": invalid ASI expression"
 msgstr ""
 
-#: config/tc-sparc.c:2028
+#: config/tc-sparc.c:2323
 msgid ": invalid ASI number"
 msgstr ""
 
-#: config/tc-sparc.c:2125
+#: config/tc-sparc.c:2420
 msgid "OPF immediate operand out of range (0-0x1ff)"
 msgstr ""
 
-#: config/tc-sparc.c:2130
+#: config/tc-sparc.c:2425
 msgid "non-immediate OPF operand, ignored"
 msgstr ""
 
-#: config/tc-sparc.c:2149
+#: config/tc-sparc.c:2444
 msgid ": invalid cpreg name"
 msgstr ""
 
-#: config/tc-sparc.c:2178
+#: config/tc-sparc.c:2473
 #, c-format
 msgid "Illegal operands%s"
 msgstr ""
 
-#: config/tc-sparc.c:2207
+#: config/tc-sparc.c:2502
 #, c-format
 msgid "architecture bumped from \"%s\" to \"%s\" on \"%s\""
 msgstr ""
 
-#: config/tc-sparc.c:2243
+#: config/tc-sparc.c:2538
 #, c-format
 msgid "Architecture mismatch on \"%s\"."
 msgstr ""
 
-#: config/tc-sparc.c:2244
+#: config/tc-sparc.c:2539
 #, c-format
 msgid " (Requires %s; requested architecture is %s.)"
 msgstr ""
 
-#: config/tc-sparc.c:2760
+#: config/tc-sparc.c:3063
 #, c-format
 msgid "bad or unhandled relocation type: 0x%02x"
 msgstr ""
 
-#: config/tc-sparc.c:3037
+#: config/tc-sparc.c:3365
 msgid "bad .reserve segment -- expected BSS segment"
 msgstr ""
 
-#: config/tc-sparc.c:3054
+#: config/tc-sparc.c:3382
 msgid "missing alignment"
 msgstr ""
 
-#: config/tc-sparc.c:3065 config/tc-sparc.c:3210
+#: config/tc-sparc.c:3393 config/tc-sparc.c:3538
 #, c-format
 msgid "alignment too large; assuming %d"
 msgstr ""
 
-#: config/tc-sparc.c:3071 config/tc-sparc.c:3216
+#: config/tc-sparc.c:3399 config/tc-sparc.c:3544
 msgid "negative alignment"
 msgstr ""
 
-#: config/tc-sparc.c:3081 config/tc-sparc.c:3239
+#: config/tc-sparc.c:3409 config/tc-sparc.c:3567
 msgid "alignment not a power of 2"
 msgstr ""
 
-#: config/tc-sparc.c:3196
+#: config/tc-sparc.c:3524
 msgid "Expected comma after common length"
 msgstr ""
 
+#: config/tc-sparc.c:3759 config/tc-sparc.c:3769
+msgid "register syntax is .register %%g[2367],{#scratch|symbolname|#ignore}"
+msgstr ""
+
+#: config/tc-sparc.c:3787
+msgid "redefinition of global register"
+msgstr ""
+
+#: config/tc-sparc.c:3798
+#, c-format
+msgid "Register symbol %s already defined."
+msgstr ""
+
 #: config/tc-tahoe.c:387
 msgid "The -a option doesn't exist. (Despite what the man page says!"
 msgstr ""
@@ -5874,214 +6424,210 @@ msgstr ""
 msgid "Can't close `%s'"
 msgstr ""
 
-#: ecoff.c:1576
+#: ecoff.c:1577
 #, c-format
 msgid "String too big (%lu bytes)"
 msgstr ""
 
-#: ecoff.c:1602
+#: ecoff.c:1603
 #, c-format
 msgid "Inserting \"%s\" into string hash table: %s"
 msgstr ""
 
-#: ecoff.c:1634 ecoff.c:1827 ecoff.c:1853 ecoff.c:1885 ecoff.c:2041
-#: ecoff.c:2155
+#: ecoff.c:1635 ecoff.c:1828 ecoff.c:1854 ecoff.c:1886 ecoff.c:2042
+#: ecoff.c:2156
 msgid "no current file pointer"
 msgstr ""
 
-#: ecoff.c:1721
+#: ecoff.c:1722
 msgid "too many st_End's"
 msgstr ""
 
-#: ecoff.c:2067
+#: ecoff.c:2068
 #, c-format
 msgid "Inserting \"%s\" into tag hash table: %s"
 msgstr ""
 
-#: ecoff.c:2233
+#: ecoff.c:2234
 msgid "fake .file after real one"
 msgstr ""
 
-#: ecoff.c:2321
+#: ecoff.c:2322
 msgid "Filename goes over one page boundary."
 msgstr ""
 
-#: ecoff.c:2456
+#: ecoff.c:2457
 msgid ".begin directive without a preceding .file directive"
 msgstr ""
 
-#: ecoff.c:2463
+#: ecoff.c:2464
 msgid ".begin directive without a preceding .ent directive"
 msgstr ""
 
-#: ecoff.c:2495
+#: ecoff.c:2496
 msgid ".bend directive without a preceding .file directive"
 msgstr ""
 
-#: ecoff.c:2502
+#: ecoff.c:2503
 msgid ".bend directive without a preceding .ent directive"
 msgstr ""
 
-#: ecoff.c:2515
+#: ecoff.c:2516
 msgid ".bend directive names unknown symbol"
 msgstr ""
 
-#: ecoff.c:2559
+#: ecoff.c:2560
 msgid ".def pseudo-op used inside of .def/.endef; ignored"
 msgstr ""
 
-#: ecoff.c:2561
+#: ecoff.c:2562
 msgid "Empty symbol name in .def; ignored"
 msgstr ""
 
-#: ecoff.c:2599
+#: ecoff.c:2600
 msgid ".dim pseudo-op used outside of .def/.endef; ignored"
 msgstr ""
 
-#: ecoff.c:2614
+#: ecoff.c:2615
 msgid "Badly formed .dim directive"
 msgstr ""
 
-#: ecoff.c:2627
+#: ecoff.c:2628
 msgid "Too many .dim entries"
 msgstr ""
 
-#: ecoff.c:2648
+#: ecoff.c:2649
 msgid ".scl pseudo-op used outside of .def/.endef; ignored"
 msgstr ""
 
-#: ecoff.c:2674
+#: ecoff.c:2675
 msgid ".size pseudo-op used outside of .def/.endef; ignored"
 msgstr ""
 
-#: ecoff.c:2689
+#: ecoff.c:2690
 msgid "Badly formed .size directive"
 msgstr ""
 
-#: ecoff.c:2702
+#: ecoff.c:2703
 msgid "Too many .size entries"
 msgstr ""
 
-#: ecoff.c:2725
+#: ecoff.c:2726
 msgid ".type pseudo-op used outside of .def/.endef; ignored"
 msgstr ""
 
 #. FIXME: We could handle this by setting the continued bit.
 #. There would still be a limit: the .type argument can not
 #. be infinite.
-#: ecoff.c:2743
+#: ecoff.c:2744
 #, c-format
 msgid "The type of %s is too complex; it will be simplified"
 msgstr ""
 
-#: ecoff.c:2754
+#: ecoff.c:2755
 msgid "Unrecognized .type argument"
 msgstr ""
 
-#: ecoff.c:2793
+#: ecoff.c:2794
 msgid ".tag pseudo-op used outside of .def/.endef; ignored"
 msgstr ""
 
-#: ecoff.c:2820
+#: ecoff.c:2821
 msgid ".val pseudo-op used outside of .def/.endef; ignored"
 msgstr ""
 
-#: ecoff.c:2828
+#: ecoff.c:2829
 msgid ".val expression is too copmlex"
 msgstr ""
 
-#: ecoff.c:2859
+#: ecoff.c:2860
 msgid ".endef pseudo-op used before .def; ignored"
 msgstr ""
 
-#: ecoff.c:2885
+#: ecoff.c:2886
 msgid "Bad COFF debugging info"
 msgstr ""
 
-#: ecoff.c:2934
+#: ecoff.c:2935
 #, c-format
 msgid "No tag specified for %s"
 msgstr ""
 
-#: ecoff.c:2966
+#: ecoff.c:2967
 msgid "Bad COFF debugging information"
 msgstr ""
 
-#: ecoff.c:3038
+#: ecoff.c:3039
 msgid ".end directive without a preceding .file directive"
 msgstr ""
 
-#: ecoff.c:3045
+#: ecoff.c:3046
 msgid ".end directive without a preceding .ent directive"
 msgstr ""
 
-#: ecoff.c:3068
+#: ecoff.c:3069
 msgid ".end directive names unknown symbol"
 msgstr ""
 
-#: ecoff.c:3097
+#: ecoff.c:3098
 msgid "second .ent directive found before .end directive"
 msgstr ""
 
-#: ecoff.c:3172
+#: ecoff.c:3173
 msgid "No way to handle .file within .ent/.end section"
 msgstr ""
 
-#: ecoff.c:3197
+#: ecoff.c:3198
 msgid ".fmask outside of .ent"
 msgstr ""
 
-#: ecoff.c:3266
+#: ecoff.c:3267
 msgid ".mask outside of .ent"
 msgstr ""
 
-#: ecoff.c:3296
+#: ecoff.c:3297
 msgid ".loc before .file"
 msgstr ""
 
-#: ecoff.c:3303
-msgid ".loc outside of .text"
-msgstr ""
-
-#: ecoff.c:3422
+#: ecoff.c:3423
 #, c-format
 msgid "Ignoring attempt to redefine symbol `%s'."
 msgstr ""
 
-#: ecoff.c:3435
+#: ecoff.c:3436
 msgid "bad .weakext directive"
 msgstr ""
 
-#: ecoff.c:3504
+#: ecoff.c:3505
 #, c-format
 msgid ".stab%c is not supported"
 msgstr ""
 
-#: ecoff.c:3514
+#: ecoff.c:3515
 #, c-format
 msgid ".stab%c: ignoring non-zero other field"
 msgstr ""
 
-#: ecoff.c:3548
+#: ecoff.c:3549
 #, c-format
 msgid ""
 "Line number (%d) for .stab%c directive cannot fit in index field (20 bits)"
 msgstr ""
 
-#: ecoff.c:3584
+#: ecoff.c:3585
 #, c-format
 msgid "Illegal .stab%c directive, bad character"
 msgstr ""
 
-#: ecoff.c:4046 ecoff.c:4235 ecoff.c:4260
+#: ecoff.c:4047 ecoff.c:4236 ecoff.c:4261
 msgid ".begin/.bend in different segments"
 msgstr ""
 
-#: ecoff.c:4761
+#: ecoff.c:4762
 msgid "Missing .end or .bend at end of file"
 msgstr ""
 
-#: ecoff.c:5252
+#: ecoff.c:5253
 msgid "GP prologue size exceeds field size, using 0 instead"
 msgstr ""
 
@@ -6107,66 +6653,66 @@ msgstr ""
 #. either not seen or not defined.
 #. @@ Should print out the original string instead of
 #. the parsed number.
-#: expr.c:581
+#: expr.c:583
 #, c-format
 msgid "backw. ref to unknown label \"%d:\", 0 assumed."
 msgstr ""
 
-#: expr.c:705
+#: expr.c:707
 msgid "Character constant too large"
 msgstr ""
 
-#: expr.c:941
+#: expr.c:946
 #, c-format
 msgid "expr.c(operand): bad atof_generic return val %d"
 msgstr ""
 
-#: expr.c:1001
+#: expr.c:1006
 msgid "Missing ')' assumed"
 msgstr ""
 
-#: expr.c:1011 read.c:3824
+#: expr.c:1017 read.c:3857
 msgid "EBCDIC constants are not supported"
 msgstr ""
 
-#: expr.c:1078
+#: expr.c:1087
 #, c-format
 msgid "Unary operator %c ignored because bad operand follows"
 msgstr ""
 
-#: expr.c:1122 expr.c:1147
+#: expr.c:1133 expr.c:1158
 msgid "syntax error in .startof. or .sizeof."
 msgstr ""
 
-#: expr.c:1296
+#: expr.c:1311
 msgid "Bad expression"
 msgstr ""
 
-#: expr.c:1644
+#: expr.c:1676
 msgid "missing operand; zero assumed"
 msgstr ""
 
-#: expr.c:1677
+#: expr.c:1709
 msgid "operation combines symbols in different segments"
 msgstr ""
 
-#: expr.c:1693
+#: expr.c:1725
 msgid "left operand is a bignum; integer 0 assumed"
 msgstr ""
 
-#: expr.c:1695
+#: expr.c:1727
 msgid "left operand is a float; integer 0 assumed"
 msgstr ""
 
-#: expr.c:1704
+#: expr.c:1736
 msgid "right operand is a bignum; integer 0 assumed"
 msgstr ""
 
-#: expr.c:1706
+#: expr.c:1738
 msgid "right operand is a float; integer 0 assumed"
 msgstr ""
 
-#: expr.c:1754 symbols.c:1092
+#: expr.c:1786 symbols.c:1109
 msgid "division by zero"
 msgstr ""
 
@@ -6183,277 +6729,277 @@ msgstr ""
 msgid "attempt to allocate data in common section"
 msgstr ""
 
-#: gasp.c:484
+#: gasp.c:485
 msgid "redefinition not allowed\n"
 msgstr ""
 
-#: gasp.c:558
+#: gasp.c:559
 #, c-format
 msgid "the %c operator cannot take non-absolute arguments.\n"
 msgstr ""
 
-#: gasp.c:635
+#: gasp.c:636
 msgid "string where expression expected.\n"
 msgstr ""
 
-#: gasp.c:641
+#: gasp.c:642
 msgid "can't find primary in expression.\n"
 msgstr ""
 
-#: gasp.c:681
+#: gasp.c:682
 msgid "misplaced closing parens.\n"
 msgstr ""
 
-#: gasp.c:718
+#: gasp.c:719
 msgid "attempt to divide by zero.\n"
 msgstr ""
 
-#: gasp.c:750
+#: gasp.c:751
 msgid "can't add two relocatable expressions\n"
 msgstr ""
 
-#: gasp.c:955
+#: gasp.c:956
 msgid "unreasonable nesting.\n"
 msgstr ""
 
-#: gasp.c:1033
+#: gasp.c:1034
 msgid "End of file not at start of line.\n"
 msgstr ""
 
-#: gasp.c:1154
+#: gasp.c:1155
 #, c-format
 msgid "Illegal base character %c.\n"
 msgstr ""
 
-#: gasp.c:1269
+#: gasp.c:1270
 #, c-format
 msgid "radix is %c must be one of b, q, d or h"
 msgstr ""
 
-#: gasp.c:1305
+#: gasp.c:1306
 #, c-format
 msgid "size must be one of b, w or l, is %c.\n"
 msgstr ""
 
-#: gasp.c:1413
+#: gasp.c:1414
 msgid "datab repeat must be constant.\n"
 msgstr ""
 
-#: gasp.c:1415
+#: gasp.c:1416
 msgid "datab data must be absolute.\n"
 msgstr ""
 
-#: gasp.c:1429
+#: gasp.c:1430
 msgid "align needs absolute expression.\n"
 msgstr ""
 
-#: gasp.c:1436
+#: gasp.c:1437
 msgid ".align needs absolute fill value.\n"
 msgstr ""
 
-#: gasp.c:1444
+#: gasp.c:1445
 msgid "alignment must be one of 1, 2 or 4.\n"
 msgstr ""
 
-#: gasp.c:1469
+#: gasp.c:1470
 msgid "res needs absolute expression for fill count.\n"
 msgstr ""
 
-#: gasp.c:1549
+#: gasp.c:1550
 msgid "form LIN= needs absolute expresssion.\n"
 msgstr ""
 
-#: gasp.c:1552
+#: gasp.c:1553
 msgid "COL="
 msgstr ""
 
-#: gasp.c:1555
+#: gasp.c:1556
 msgid "form COL= needs absolute expresssion.\n"
 msgstr ""
 
 #. Turns the next expression into a string
-#: gasp.c:1597 macro.c:400
+#: gasp.c:1598 macro.c:402
 #, c-format
 msgid "% operator needs absolute expression"
 msgstr ""
 
-#: gasp.c:1659
+#: gasp.c:1660
 msgid "misplaced ( .\n"
 msgstr ""
 
-#: gasp.c:1674
+#: gasp.c:1675
 msgid "misplaced ).\n"
 msgstr ""
 
-#: gasp.c:1728
+#: gasp.c:1729
 msgid ".instr needs absolute expresson.\n"
 msgstr ""
 
-#: gasp.c:1766
+#: gasp.c:1767
 msgid "need absolute position.\n"
 msgstr ""
 
-#: gasp.c:1768
+#: gasp.c:1769
 msgid "need absolute length.\n"
 msgstr ""
 
-#: gasp.c:2017
+#: gasp.c:2018
 msgid "END missing from end of file.\n"
 msgstr ""
 
-#: gasp.c:2047
+#: gasp.c:2048
 msgid ".ASSIGNA needs constant expression argument.\n"
 msgstr ""
 
-#: gasp.c:2051
+#: gasp.c:2052
 msgid ".ASSIGNA without label.\n"
 msgstr ""
 
-#: gasp.c:2076
+#: gasp.c:2077
 msgid ".ASSIGNS without label.\n"
 msgstr ""
 
-#: gasp.c:2143
+#: gasp.c:2144
 #, c-format
 msgid "Can't find preprocessor variable %s.\n"
 msgstr ""
 
-#: gasp.c:2208
+#: gasp.c:2209
 msgid "Comparison operator must be one of EQ, NE, LT, LE, GT or GE.\n"
 msgstr ""
 
-#: gasp.c:2242
+#: gasp.c:2243
 msgid "Comparison operator for strings must be EQ or NE\n"
 msgstr ""
 
-#: gasp.c:2254 gasp.c:2264 gasp.c:2366
+#: gasp.c:2255 gasp.c:2265 gasp.c:2367
 msgid "Conditional operator must have absolute operands.\n"
 msgstr ""
 
-#: gasp.c:2259
+#: gasp.c:2260
 msgid "String compared against expression.\n"
 msgstr ""
 
-#: gasp.c:2309
+#: gasp.c:2310
 msgid "AIF nesting unreasonable.\n"
 msgstr ""
 
-#: gasp.c:2324
+#: gasp.c:2325
 msgid "Multiple AELSEs in AIF.\n"
 msgstr ""
 
-#: gasp.c:2340
+#: gasp.c:2341
 msgid "AENDI without AIF.\n"
 msgstr ""
 
-#: gasp.c:2363 gasp.c:2445
+#: gasp.c:2364 gasp.c:2446
 msgid "IF nesting unreasonable.\n"
 msgstr ""
 
-#: gasp.c:2455
+#: gasp.c:2456
 msgid "Bad format for IF or IFNC.\n"
 msgstr ""
 
-#: gasp.c:2475
+#: gasp.c:2476
 msgid "AENDR without a AREPEAT.\n"
 msgstr ""
 
-#: gasp.c:2477
+#: gasp.c:2478
 msgid "ENDR without a REPT.\n"
 msgstr ""
 
-#: gasp.c:2500
+#: gasp.c:2501
 #, c-format
 msgid "AWHILE without a AENDW at %d.\n"
 msgstr ""
 
-#: gasp.c:2538
+#: gasp.c:2539
 msgid "AENDW without a AENDW.\n"
 msgstr ""
 
-#: gasp.c:2583
+#: gasp.c:2584
 msgid "AREPEAT must have absolute operand.\n"
 msgstr ""
 
-#: gasp.c:2589
+#: gasp.c:2590
 #, c-format
 msgid "AREPEAT without a AENDR at %d.\n"
 msgstr ""
 
-#: gasp.c:2631
+#: gasp.c:2632
 msgid ".ENDM without a matching .MACRO.\n"
 msgstr ""
 
-#: gasp.c:2665
+#: gasp.c:2666
 msgid "LOCAL outside of MACRO"
 msgstr ""
 
-#: gasp.c:2678
+#: gasp.c:2679
 #, c-format
 msgid "macro at line %d: %s\n"
 msgstr ""
 
-#: gasp.c:2701
+#: gasp.c:2702
 msgid "macro expansion"
 msgstr ""
 
-#: gasp.c:2753
+#: gasp.c:2754
 msgid "Character code in string must be absolute expression.\n"
 msgstr ""
 
-#: gasp.c:2758
+#: gasp.c:2759
 msgid "Missing > for character code.\n"
 msgstr ""
 
-#: gasp.c:2817
+#: gasp.c:2818
 #, c-format
 msgid "string for SDATAC longer than 255 characters (%d).\n"
 msgstr ""
 
-#: gasp.c:2845
+#: gasp.c:2846
 #, c-format
 msgid "illegal character in SDATA line (0x%x).\n"
 msgstr ""
 
-#: gasp.c:2866
+#: gasp.c:2867
 msgid "Must have absolute SDATAB repeat count.\n"
 msgstr ""
 
-#: gasp.c:2869
+#: gasp.c:2870
 #, c-format
 msgid "Must have positive SDATAB repeat count (%d).\n"
 msgstr ""
 
-#: gasp.c:2897
+#: gasp.c:2898
 #, c-format
 msgid "Unreasonable include depth (%ld).\n"
 msgstr ""
 
-#: gasp.c:2951
+#: gasp.c:2952
 #, c-format
 msgid "Can't open include file `%s'.\n"
 msgstr ""
 
-#: gasp.c:3025
+#: gasp.c:3026
 msgid "Unreasonable expansion (-u turns off check).\n"
 msgstr ""
 
 #. This one causes lots of pain when trying to preprocess
 #. ordinary code
-#: gasp.c:3246
+#: gasp.c:3247
 #, c-format
 msgid "Unrecognised pseudo op `%s'.\n"
 msgstr ""
 
-#: gasp.c:3313
+#: gasp.c:3314
 msgid "ORG command not allowed.\n"
 msgstr ""
 
-#: gasp.c:3530
+#: gasp.c:3531
 msgid "Invalid expression on command line.\n"
 msgstr ""
 
-#: gasp.c:3571
+#: gasp.c:3572
 #, c-format
 msgid ""
 "Usage: %s \n"
@@ -6466,7 +7012,7 @@ msgid ""
 "  [-p]      [--print]             print line numbers\n"
 msgstr ""
 
-#: gasp.c:3580
+#: gasp.c:3581
 msgid ""
 "  [-s]      [--copysource]        copy source through as comments \n"
 "  [-u]      [--unreasonable]      allow unreasonable nesting\n"
@@ -6477,37 +7023,37 @@ msgid ""
 "  [in-file]\n"
 msgstr ""
 
-#: gasp.c:3596
+#: gasp.c:3597
 #, c-format
 msgid "%s: Gnu Assembler Macro Preprocessor\n"
 msgstr ""
 
 #. This output is intended to follow the GNU standards document.
-#: gasp.c:3680
+#: gasp.c:3681
 #, c-format
 msgid "GNU assembler pre-processor %s\n"
 msgstr ""
 
-#: gasp.c:3681
+#: gasp.c:3682
 msgid "Copyright 1996 Free Software Foundation, Inc.\n"
 msgstr ""
 
-#: gasp.c:3703
+#: gasp.c:3704
 #, c-format
 msgid "%s: Can't open output file `%s'.\n"
 msgstr ""
 
-#: gasp.c:3726
+#: gasp.c:3727
 #, c-format
 msgid "%s: Can't open input file `%s'.\n"
 msgstr ""
 
-#: gasp.c:3745
+#: gasp.c:3746
 #, c-format
 msgid "Internal error, aborting at %s line %d"
 msgstr ""
 
-#: gasp.c:3748
+#: gasp.c:3749
 msgid ""
 "\n"
 "Please report this bug.\n"
@@ -6567,57 +7113,57 @@ msgstr ""
 msgid "Error:"
 msgstr ""
 
-#: listing.c:1140
+#: listing.c:1145
 #, c-format
 msgid "can't open list file: %s"
 msgstr ""
 
-#: listing.c:1164
+#: listing.c:1169
 #, c-format
 msgid "error closing list file: %s"
 msgstr ""
 
-#: listing.c:1245
+#: listing.c:1250
 msgid "strange paper height, set to no form"
 msgstr ""
 
-#: listing.c:1311
+#: listing.c:1316
 msgid "New line in title"
 msgstr ""
 
-#: macro.c:563
+#: macro.c:565
 msgid "unexpected end of file in macro definition"
 msgstr ""
 
-#: macro.c:572
+#: macro.c:574
 msgid "missing ) after formals"
 msgstr ""
 
-#: macro.c:729
+#: macro.c:731
 msgid "missplaced )"
 msgstr ""
 
-#: macro.c:991
+#: macro.c:993
 msgid "confusion in formal parameters"
 msgstr ""
 
-#: macro.c:996
+#: macro.c:998
 msgid "macro formal argument does not exist"
 msgstr ""
 
-#: macro.c:1011
+#: macro.c:1013
 msgid "can't mix positional and keyword arguments"
 msgstr ""
 
-#: macro.c:1019
+#: macro.c:1021
 msgid "too many positional arguments"
 msgstr ""
 
-#: macro.c:1194
+#: macro.c:1196
 msgid "unexpected end of file in irp or irpc"
 msgstr ""
 
-#: macro.c:1202
+#: macro.c:1204
 msgid "missing model parameter"
 msgstr ""
 
@@ -6688,305 +7234,306 @@ msgstr ""
 msgid "Can't continue"
 msgstr ""
 
-#: read.c:434
+#: read.c:439
 #, c-format
 msgid "error constructing %s pseudo-op table: %s"
 msgstr ""
 
-#: read.c:802
+#: read.c:804
 #, c-format
 msgid "Unknown pseudo-op:  `%s'"
 msgstr ""
 
-#: read.c:928
+#: read.c:933
 #, c-format
 msgid "label \"%d$\" redefined"
 msgstr ""
 
-#: read.c:1145
+#: read.c:1150
 msgid ".abort detected.  Abandoning ship."
 msgstr ""
 
-#: read.c:1250 read.c:2031
+#: read.c:1241 read.c:2024
 msgid "Alignment not a power of 2"
 msgstr ""
 
-#: read.c:1258
+#: read.c:1249
 #, c-format
 msgid "Alignment too large: %u assumed"
 msgstr ""
 
-#: read.c:1290
+#: read.c:1281
 msgid "expected fill pattern missing"
 msgstr ""
 
-#: read.c:1487
+#: read.c:1478
 #, c-format
 msgid "attempt to re-define symbol `%s'"
 msgstr ""
 
 #. Some of the back ends can't deal with non-positive line numbers.
 #. Besides, it's silly.
-#: read.c:1611
+#: read.c:1602
 #, c-format
 msgid "Line numbers must be positive; line number %d rejected."
 msgstr ""
 
-#: read.c:1638
+#: read.c:1629
 msgid "start address not supported"
 msgstr ""
 
-#: read.c:1648
+#: read.c:1639
 msgid ".err encountered"
 msgstr ""
 
-#: read.c:1667 read.c:1669
+#: read.c:1658 read.c:1660
 #, c-format
 msgid ".fail %ld encountered"
 msgstr ""
 
-#: read.c:1706
+#: read.c:1697
 #, c-format
 msgid ".fill size clamped to %d."
 msgstr ""
 
-#: read.c:1711
+#: read.c:1702
 msgid "Size negative: .fill ignored."
 msgstr ""
 
-#: read.c:1717
+#: read.c:1708
 msgid "Repeat < 0, .fill ignored"
 msgstr ""
 
-#: read.c:1873
+#: read.c:1866
 #, c-format
 msgid "unrecognized .linkonce type `%s'"
 msgstr ""
 
-#: read.c:1886 read.c:1912
+#: read.c:1879 read.c:1905
 msgid ".linkonce is not supported for this object file format"
 msgstr ""
 
-#: read.c:1908
+#: read.c:1901
 #, c-format
 msgid "bfd_set_section_flags: %s"
 msgstr ""
 
-#: read.c:1977
+#: read.c:1970
 #, c-format
 msgid "error setting flags for \".sbss\": %s"
 msgstr ""
 
-#: read.c:2009
+#: read.c:2002
 msgid "Expected comma after size"
 msgstr ""
 
-#: read.c:2017
+#: read.c:2010
 msgid "Missing alignment"
 msgstr ""
 
-#: read.c:2154
+#: read.c:2152
 msgid "bad expression"
 msgstr ""
 
-#: read.c:2289
+#: read.c:2283
 #, c-format
 msgid "attempt to redefine pseudo-op `%s' ignored"
 msgstr ""
 
-#: read.c:2353
+#: read.c:2349
 #, c-format
 msgid "invalid segment \"%s\"; segment \"%s\" assumed"
 msgstr ""
 
-#: read.c:2359
+#: read.c:2355
 msgid "ignoring fill value in absolute section"
 msgstr ""
 
-#: read.c:2362
+#: read.c:2358
 msgid "only constant offsets supported in absolute section"
 msgstr ""
 
-#: read.c:2394
+#: read.c:2390
 msgid "MRI style ORG pseudo-op not supported"
 msgstr ""
 
-#: read.c:2482
+#: read.c:2478
 msgid "unrecognized section type"
 msgstr ""
 
-#: read.c:2550
+#: read.c:2546
 #, c-format
 msgid "unrecognized section type `%s'"
 msgstr ""
 
-#: read.c:2564
+#: read.c:2560
 msgid "absolute sections are not supported"
 msgstr ""
 
-#: read.c:2579
+#: read.c:2575
 #, c-format
 msgid "unrecognized section command `%s'"
 msgstr ""
 
-#: read.c:2654
-msgid "rept without endr"
+#: read.c:2663
+#, c-format
+msgid "%s without %s"
 msgstr ""
 
-#: read.c:2841
+#: read.c:2867
 msgid "Unsupported variable size or fill value"
 msgstr ""
 
-#: read.c:2866
+#: read.c:2892
 msgid ".space repeat count is zero, ignored"
 msgstr ""
 
-#: read.c:2868
+#: read.c:2894
 msgid ".space repeat count is negative, ignored"
 msgstr ""
 
-#: read.c:2897
+#: read.c:2923
 msgid "space allocation too complex in absolute section"
 msgstr ""
 
-#: read.c:2902
+#: read.c:2928
 msgid "space allocation too complex in common section"
 msgstr ""
 
-#: read.c:2989 read.c:4070
+#: read.c:3015 read.c:4104
 #, c-format
 msgid "Bad floating literal: %s"
 msgstr ""
 
-#: read.c:3065
+#: read.c:3091
 #, c-format
 msgid "Rest of line ignored. First ignored character is `%c'."
 msgstr ""
 
-#: read.c:3068
+#: read.c:3094
 #, c-format
 msgid "Rest of line ignored. First ignored character valued 0x%x."
 msgstr ""
 
-#: read.c:3119
+#: read.c:3145
 msgid "illegal expression; zero assumed"
 msgstr ""
 
-#: read.c:3121
+#: read.c:3147
 msgid "missing expression; zero assumed"
 msgstr ""
 
-#: read.c:3288
+#: read.c:3320
 msgid "rva without symbol"
 msgstr ""
 
-#: read.c:3413
+#: read.c:3445
 msgid "attempt to store value in absolute section"
 msgstr ""
 
-#: read.c:3451 read.c:4347
+#: read.c:3483 read.c:4381
 msgid "zero assumed for missing expression"
 msgstr ""
 
-#: read.c:3463 read.c:4359
+#: read.c:3495 read.c:4393
 msgid "register value used as expression"
 msgstr ""
 
 #. Leading bits contain both 0s & 1s.
-#: read.c:3553
+#: read.c:3585
 #, c-format
 msgid "Value 0x%lx truncated to 0x%lx."
 msgstr ""
 
-#: read.c:3569
+#: read.c:3601
 #, c-format
 msgid "Bignum truncated to %d bytes"
 msgstr ""
 
-#: read.c:3646
+#: read.c:3678
 #, c-format
 msgid "unsupported BFD relocation size %u"
 msgstr ""
 
-#: read.c:3735
+#: read.c:3767
 msgid "using a bit field width of zero"
 msgstr ""
 
-#: read.c:3743
+#: read.c:3775
 #, c-format
 msgid "field width \"%s\" too complex for a bitfield"
 msgstr ""
 
-#: read.c:3751
+#: read.c:3783
 #, c-format
 msgid "field width %lu too big to fit in %d bytes: truncated to %d bits"
 msgstr ""
 
-#: read.c:3772
+#: read.c:3804
 #, c-format
 msgid "field value \"%s\" too complex for a bitfield"
 msgstr ""
 
-#: read.c:3894
+#: read.c:3928
 msgid "Unresolvable or nonpositive repeat count; using 1"
 msgstr ""
 
-#: read.c:3945
+#: read.c:3979
 #, c-format
 msgid "Unknown floating type type '%c'"
 msgstr ""
 
-#: read.c:3967
+#: read.c:4001
 msgid "Floating point constant too large"
 msgstr ""
 
-#: read.c:4092
+#: read.c:4126
 msgid "unresolvable or nonpositive repeat count; using 1"
 msgstr ""
 
-#: read.c:4496
+#: read.c:4530
 msgid "Expected <nn>"
 msgstr ""
 
 #. To be compatible with BSD 4.2 as: give the luser a linefeed!!
-#: read.c:4529 read.c:4612
+#: read.c:4563 read.c:4646
 msgid "Unterminated string: Newline inserted."
 msgstr ""
 
-#: read.c:4620
+#: read.c:4654
 msgid "Bad escaped character in string, '?' assumed"
 msgstr ""
 
-#: read.c:4646
+#: read.c:4680
 msgid "expected address expression; zero assumed"
 msgstr ""
 
-#: read.c:4666
+#: read.c:4700
 #, c-format
 msgid "symbol \"%s\" undefined; zero assumed"
 msgstr ""
 
-#: read.c:4669
+#: read.c:4703
 msgid "some symbol undefined; zero assumed"
 msgstr ""
 
-#: read.c:4687
+#: read.c:4721
 msgid "bad or irreducible absolute expression; zero assumed"
 msgstr ""
 
-#: read.c:4725
+#: read.c:4759
 msgid "This string may not contain '\\0'"
 msgstr ""
 
-#: read.c:4764
+#: read.c:4798
 msgid "Missing string"
 msgstr ""
 
-#: read.c:4995
+#: read.c:5029
 msgid "missing .func"
 msgstr ""
 
-#: read.c:5012
+#: read.c:5046
 msgid ".endfunc missing for previous .func"
 msgstr ""
 
@@ -7008,66 +7555,61 @@ msgstr ""
 msgid "Attempt to switch to nonexistent segment \"%s\""
 msgstr ""
 
-#: symbols.c:364 symbols.c:459
+#: symbols.c:365 symbols.c:467
 #, c-format
 msgid "Symbol %s already defined."
 msgstr ""
 
-#: symbols.c:439
-#, c-format
-msgid "Symbol \"%s\" is already defined as \"%s\"/%d.%d.%ld."
-msgstr ""
-
-#: symbols.c:445
+#: symbols.c:453
 #, c-format
-msgid "Symbol \"%s\" is already defined as \"%s\"/%ld."
+msgid "Symbol \"%s\" is already defined as \"%s\"/%s%ld."
 msgstr ""
 
-#: symbols.c:528 symbols.c:535
+#: symbols.c:536 symbols.c:543
 #, c-format
 msgid "Inserting \"%s\" into symbol table failed: %s"
 msgstr ""
 
-#: symbols.c:880
+#: symbols.c:894
 #, c-format
 msgid "Symbol definition loop encountered at %s"
 msgstr ""
 
-#: symbols.c:1054 symbols.c:1058
+#: symbols.c:1071 symbols.c:1075
 #, c-format
 msgid "undefined symbol %s in operation"
 msgstr ""
 
-#: symbols.c:1062
+#: symbols.c:1079
 msgid "invalid section for operation"
 msgstr ""
 
-#: symbols.c:1067 symbols.c:1071
+#: symbols.c:1084 symbols.c:1088
 #, c-format
 msgid "undefined symbol %s in operation setting %s"
 msgstr ""
 
-#: symbols.c:1076
+#: symbols.c:1093
 #, c-format
 msgid "invalid section for operation setting %s"
 msgstr ""
 
-#: symbols.c:1094
+#: symbols.c:1111
 #, c-format
 msgid "division by zero when setting %s"
 msgstr ""
 
-#: symbols.c:1166 write.c:1877
+#: symbols.c:1183 write.c:1881
 #, c-format
 msgid "can't resolve value for symbol \"%s\""
 msgstr ""
 
-#: symbols.c:1536
+#: symbols.c:1556
 #, c-format
 msgid "\"%d\" (instance number %d of a %s label)"
 msgstr ""
 
-#: symbols.c:1584
+#: symbols.c:1606
 #, c-format
 msgid "Attempt to get value of unresolved symbol %s"
 msgstr ""
@@ -7081,86 +7623,83 @@ msgstr ""
 msgid "rva not supported"
 msgstr ""
 
-#: write.c:501
+#: write.c:502
 #, c-format
 msgid "attempt to .org/.space backwards? (%ld)"
 msgstr ""
 
-#: write.c:975
+#: write.c:974
 msgid "relocation out of range"
 msgstr ""
 
-#: write.c:978
+#: write.c:977
 #, c-format
 msgid "%s:%u: bad return from bfd_install_relocation: %x"
 msgstr ""
 
-#: write.c:1023
+#: write.c:1022
 msgid "internal error: fixup not contained within frag"
 msgstr ""
 
-#: write.c:1039
+#: write.c:1038
 #, c-format
 msgid "%s:%u: bad return from bfd_install_relocation"
 msgstr ""
 
-#: write.c:1122 write.c:1146
+#: write.c:1125 write.c:1149
 #, c-format
 msgid "FATAL: Can't write %s"
 msgstr ""
 
-#: write.c:1177
+#: write.c:1180
 msgid "Cannot write to output file."
 msgstr ""
 
-#: write.c:1408
+#: write.c:1412
 #, c-format
 msgid "%d error%s, %d warning%s, generating bad object file.\n"
 msgstr ""
 
-#: write.c:1415
+#: write.c:1419
 #, c-format
 msgid "%d error%s, %d warning%s, no object file generated.\n"
 msgstr ""
 
-#: write.c:1814
+#: write.c:1818
 #, c-format
 msgid "local label %s is not defined"
 msgstr ""
 
-#: write.c:2119
+#: write.c:2123
 #, c-format
 msgid "alignment padding (%lu bytes) not a multiple of %ld"
 msgstr ""
 
-#: write.c:2225
+#: write.c:2229
 #, c-format
 msgid ".word %s-%s+%s didn't fit"
 msgstr ""
 
-#. Growth may be negative, but variable part of frag
-#. cannot have fewer than 0 chars.  That is, we can't
-#. .org backwards.
-#: write.c:2304
+#: write.c:2309
 msgid "attempt to .org backwards ignored"
 msgstr ""
 
-#: write.c:2320
+#: write.c:2332
 msgid ".space specifies non-absolute value"
 msgstr ""
 
-#: write.c:2324
+#: write.c:2336
 msgid ".space or .fill with negative value, ignored"
 msgstr ""
 
-#: write.c:2575
+#: write.c:2587
 #, c-format
 msgid ""
 "Subtraction of two symbols in different sections \"%s\" {%s section} - "
 "\"%s\" {%s section} at file address %s."
 msgstr ""
 
-#: write.c:2750
+#: write.c:2752
 #, c-format
 msgid "Value of %s too large for field of %d bytes at %s"
 msgstr ""
diff --git a/gprof/po/gprof.pot b/gprof/po/gprof.pot
index b1cf0ee..f30b1a0 100644
--- a/gprof/po/gprof.pot
+++ b/gprof/po/gprof.pot
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 1999-07-01 01:36-0400\n"
+"POT-Creation-Date: 2000-02-22 02:24-0500\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -235,12 +235,12 @@ msgstr ""
 msgid "%s: -c not supported on architecture %s\n"
 msgstr ""
 
-#: corefile.c:432
+#: corefile.c:433
 #, c-format
 msgid "%s: file `%s' has no symbols\n"
 msgstr ""
 
-#: corefile.c:753
+#: corefile.c:755
 #, c-format
 msgid "%s: somebody miscounted: ltab.len=%d instead of %ld\n"
 msgstr ""
@@ -280,36 +280,41 @@ msgstr ""
 msgid "%s: incompatible with first gmon file\n"
 msgstr ""
 
-#: gmon_io.c:271
+#: gmon_io.c:258
+#, c-format
+msgid "%s: file '%s' does not appear to be in gmon.out format\n"
+msgstr ""
+
+#: gmon_io.c:280
 #, c-format
 msgid "%s: unexpected EOF after reading %d/%d bins\n"
 msgstr ""
 
-#: gmon_io.c:306
+#: gmon_io.c:315
 msgid "time is in ticks, not seconds\n"
 msgstr ""
 
-#: gmon_io.c:312 gmon_io.c:452
+#: gmon_io.c:321 gmon_io.c:461
 #, c-format
 msgid "%s: don't know how to deal with file format %d\n"
 msgstr ""
 
-#: gmon_io.c:319
+#: gmon_io.c:328
 #, c-format
 msgid "File `%s' (version %d) contains:\n"
 msgstr ""
 
-#: gmon_io.c:321
+#: gmon_io.c:330
 #, c-format
 msgid "\t%d histogram record%s\n"
 msgstr ""
 
-#: gmon_io.c:323
+#: gmon_io.c:332
 #, c-format
 msgid "\t%d call-graph record%s\n"
 msgstr ""
 
-#: gmon_io.c:325
+#: gmon_io.c:334
 #, c-format
 msgid "\t%d basic-block count record%s\n"
 msgstr ""
diff --git a/ld/Makefile.in b/ld/Makefile.in
index 53e522a..a0b5a2b 100644
--- a/ld/Makefile.in
+++ b/ld/Makefile.in
@@ -82,7 +82,6 @@ INCLUDE_LOCALE_H = @INCLUDE_LOCALE_H@
 INSTOBJEXT = @INSTOBJEXT@
 INTLDEPS = @INTLDEPS@
 INTLOBJS = @INTLOBJS@
-LD = @LD@
 LIBTOOL = @LIBTOOL@
 LN_S = @LN_S@
 MAINT = @MAINT@
@@ -90,7 +89,7 @@ MAKEINFO = @MAKEINFO@
 MKINSTALLDIRS = @MKINSTALLDIRS@
 MSGFMT = @MSGFMT@
 NATIVE_LIB_DIRS = @NATIVE_LIB_DIRS@
-NM = @NM@
+OBJDUMP = @OBJDUMP@
 PACKAGE = @PACKAGE@
 POFILES = @POFILES@
 POSUB = @POSUB@
@@ -98,7 +97,6 @@ RANLIB = @RANLIB@
 STRINGIFY = @STRINGIFY@
 USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
 USE_NLS = @USE_NLS@
-USE_SYMBOL_UNDERSCORE = @USE_SYMBOL_UNDERSCORE@
 VERSION = @VERSION@
 l = @l@
 
diff --git a/ld/aclocal.m4 b/ld/aclocal.m4
index 11934b0..8bebfa0 100644
--- a/ld/aclocal.m4
+++ b/ld/aclocal.m4
@@ -105,7 +105,7 @@ fi
 AC_SUBST($1)])
 
 
-# serial 35 AC_PROG_LIBTOOL
+# serial 40 AC_PROG_LIBTOOL
 AC_DEFUN(AC_PROG_LIBTOOL,
 [AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
 
@@ -114,10 +114,11 @@ AC_CACHE_SAVE
 
 # Actually configure libtool.  ac_aux_dir is where install-sh is found.
 CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
-DLLTOOL="$DLLTOOL" AS="$AS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
 ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
 || AC_MSG_ERROR([libtool configure failed])
 
 # Reload cache, that may have been modified by ltconfig
@@ -146,24 +147,33 @@ AC_REQUIRE([AC_PROG_RANLIB])dnl
 AC_REQUIRE([AC_PROG_CC])dnl
 AC_REQUIRE([AC_PROG_LD])dnl
 AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_SYS_NM_PARSE])dnl
-AC_REQUIRE([AC_SYS_SYMBOL_UNDERSCORE])dnl
 AC_REQUIRE([AC_PROG_LN_S])dnl
 dnl
 
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
+
 # Check for any special flags to pass to ltconfig.
 libtool_flags="--cache-file=$cache_file"
 test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
 test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
 test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
 test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
 test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
+[libtool_flags="$libtool_flags --enable-dlopen"])
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[libtool_flags="$libtool_flags --enable-win32-dll"])
+AC_ARG_ENABLE(libtool-lock,
+  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
 
 # Some flags need to be propagated to the compiler or linker for good
 # libtool support.
-case "$host" in
+case "$lt_target" in
 *-*-irix6*)
   # Find out which ABI we are using.
   echo '[#]line __oline__ "configure"' > conftest.$ac_ext
@@ -195,33 +205,28 @@ case "$host" in
   fi
   ;;
 
-*-*-cygwin*)
-  AC_SYS_LIBTOOL_CYGWIN
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw*)
+  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+  AC_CHECK_TOOL(AS, as, false)
+  AC_CHECK_TOOL(OBJDUMP, objdump, false)
   ;;
-
+])
 esac
-
-# enable the --disable-libtool-lock switch
-
-AC_ARG_ENABLE(libtool-lock,
-[  --disable-libtool-lock  force libtool not to do file locking],
-need_locks=$enableval,
-need_locks=yes)
-
-if test x"$need_locks" = xno; then
-  libtool_flags="$libtool_flags --disable-lock"
-fi
 ])
 
-# AC_LIBTOOL_DLOPEN - check for dlopen support
-AC_DEFUN(AC_LIBTOOL_DLOPEN, [lt_dlopen=yes])
+# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
+AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
+
+# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
+AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
 
 # AC_ENABLE_SHARED - implement the --enable-shared flag
 # Usage: AC_ENABLE_SHARED[(DEFAULT)]
 #   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
 #   `yes'.
-AC_DEFUN(AC_ENABLE_SHARED,
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_SHARED, [dnl
+define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
 AC_ARG_ENABLE(shared,
 changequote(<<, >>)dnl
 <<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
@@ -246,15 +251,15 @@ enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
 ])
 
 # AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN(AC_DISABLE_SHARED,
-[AC_ENABLE_SHARED(no)])
+AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)])
 
 # AC_ENABLE_STATIC - implement the --enable-static flag
 # Usage: AC_ENABLE_STATIC[(DEFAULT)]
 #   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
 #   `yes'.
-AC_DEFUN(AC_ENABLE_STATIC,
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_STATIC, [dnl
+define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
 AC_ARG_ENABLE(static,
 changequote(<<, >>)dnl
 <<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
@@ -279,16 +284,16 @@ enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
 ])
 
 # AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN(AC_DISABLE_STATIC,
-[AC_ENABLE_STATIC(no)])
+AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)])
 
 
 # AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
 # Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
 #   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
 #   `yes'.
-AC_DEFUN(AC_ENABLE_FAST_INSTALL,
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
+define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
 AC_ARG_ENABLE(fast-install,
 changequote(<<, >>)dnl
 <<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
@@ -313,9 +318,8 @@ enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
 ])
 
 # AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN(AC_DISABLE_FAST_INSTALL,
-[AC_ENABLE_FAST_INSTALL(no)])
-
+AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)])
 
 # AC_PROG_LD - find the path to the GNU or non-GNU linker
 AC_DEFUN(AC_PROG_LD,
@@ -333,7 +337,7 @@ if test "$ac_cv_prog_gcc" = yes; then
   case "$ac_prog" in
     # Accept absolute paths.
 changequote(,)dnl
-    /* | [A-Za-z]:[\\/]*)
+    [\\/]* | [A-Za-z]:[\\/]*)
       re_direlt='/[^/][^/]*/\.\./'
 changequote([,])dnl
       # Canonicalize the path of ld
@@ -359,10 +363,10 @@ else
 fi
 AC_CACHE_VAL(ac_cv_path_LD,
 [if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
   for ac_dir in $PATH; do
     test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog"; then
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
       ac_cv_path_LD="$ac_dir/$ac_prog"
       # Check to see if the program is GNU ld.  I'd rather use --version,
       # but apparently some GNU ld's only accept -v.
@@ -385,7 +389,6 @@ else
   AC_MSG_RESULT(no)
 fi
 test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_SUBST(LD)
 AC_PROG_LD_GNU
 ])
 
@@ -407,10 +410,10 @@ AC_CACHE_VAL(ac_cv_path_NM,
   # Let the user override the test.
   ac_cv_path_NM="$NM"
 else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
   for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
     test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/nm; then
+    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
       # Check to see if the nm accepts a BSD-compat flag.
       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
       #   nm: unknown option "B" ignored
@@ -431,230 +434,24 @@ else
 fi])
 NM="$ac_cv_path_NM"
 AC_MSG_RESULT([$NM])
-AC_SUBST(NM)
 ])
 
-# AC_SYS_NM_PARSE - Check for command to grab the raw symbol name followed
-# by C symbol name from nm.
-AC_DEFUN(AC_SYS_NM_PARSE,
+# AC_CHECK_LIBM - check for math library
+AC_DEFUN(AC_CHECK_LIBM,
 [AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output])
-AC_CACHE_VAL(ac_cv_sys_global_symbol_pipe,
-[# These are sane defaults that work on at least a few old systems.
-# {They come from Ultrix.  What could be older than Ultrix?!! ;)}
-
-changequote(,)dnl
-# Character class describing NM global symbol codes.
-ac_symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-ac_symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-# Define system-specific variables.
-case "$host_os" in
-aix*)
-  ac_symcode='[BCDT]'
-  ;;
-cygwin* | mingw*)
-  ac_symcode='[ABCDGISTW]'
-  ;;
-hpux*)
-  ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
+LIBM=
+case "$lt_target" in
+*-*-beos* | *-*-cygwin*)
+  # These system don't have libm
   ;;
-irix*)
-  ac_symcode='[BCDEGRST]'
+*-ncr-sysv4.3*)
+  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
   ;;
-solaris*)
-  ac_symcode='[BDT]'
+*)
+  AC_CHECK_LIB(m, main, LIBM="-lm")
   ;;
 esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
-  ac_symcode='[ABCDGISTW]'
-fi
-changequote([,])dnl
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
-  ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ 	]\($ac_symcode\)[ 	][ 	]*\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'"
-
-  # Check to see that the pipe works correctly.
-  ac_pipe_works=no
-  rm -f conftest.$ac_ext
-  cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func;return 0;}
-EOF
-
-  if AC_TRY_EVAL(ac_compile); then
-    # Now try to grab the symbols.
-    ac_nlist=conftest.nm
-  
-    if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
-
-      # Try sorting and uniquifying the output.
-      if sort "$ac_nlist" | uniq > "$ac_nlist"T; then
-	mv -f "$ac_nlist"T "$ac_nlist"
-      else
-	rm -f "$ac_nlist"T
-      fi
-
-      # Make sure that we snagged all the symbols we need.
-      if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then
-	if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then
-	  cat <<EOF > conftest.c
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
-	  # Now generate the symbol file.
-	  eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c'
-
-	  cat <<EOF >> conftest.c
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
-  const char *name;
-  lt_ptr_t address;
-}
-changequote(,)dnl
-lt_preloaded_symbols[] =
-changequote([,])dnl
-{
-EOF
-	sed 's/^. \(.*\) \(.*\)$/  {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c
-	cat <<\EOF >> conftest.c
-  {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
-	  # Now try linking the two files.
-	  mv conftest.$ac_objext conftestm.$ac_objext
-	  ac_save_LIBS="$LIBS"
-	  ac_save_CFLAGS="$CFLAGS"
-	  LIBS="conftestm.$ac_objext"
-	  CFLAGS="$CFLAGS$no_builtin_flag"
-	  if AC_TRY_EVAL(ac_link) && test -s conftest; then
-	    ac_pipe_works=yes
-	  else
-	    echo "configure: failed program was:" >&AC_FD_CC
-	    cat conftest.c >&AC_FD_CC
-	  fi
-	  LIBS="$ac_save_LIBS"
-	  CFLAGS="$ac_save_CFLAGS"
-	else
-	  echo "cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
-	fi
-      else
-	echo "cannot find nm_test_var in $ac_nlist" >&AC_FD_CC
-      fi
-    else
-      echo "cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
-    fi
-  else
-    echo "$progname: failed program was:" >&AC_FD_CC
-    cat conftest.c >&AC_FD_CC
-  fi
-  rm -rf conftest*
-
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$ac_pipe_works" = yes; then
-    if test x"$ac_symprfx" = x"_"; then
-      ac_cv_sys_symbol_underscore=yes
-    else
-      ac_cv_sys_symbol_underscore=no
-    fi
-    break
-  else
-    ac_cv_sys_global_symbol_pipe=
-  fi
-done
-])
-
-ac_result=yes
-if test -z "$ac_cv_sys_global_symbol_pipe"; then
-   ac_result=no
-fi
-AC_MSG_RESULT($ac_result)
-])
-
-# AC_SYS_LIBTOOL_CYGWIN - find tools needed on cygwin
-AC_DEFUN(AC_SYS_LIBTOOL_CYGWIN,
-[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-AC_CHECK_TOOL(AS, as, false)
-])
-
-# AC_SYS_SYMBOL_UNDERSCORE - does the compiler prefix global symbols
-#                            with an underscore?
-AC_DEFUN(AC_SYS_SYMBOL_UNDERSCORE,
-[AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_SYS_NM_PARSE])dnl
-AC_MSG_CHECKING([for _ prefix in compiled symbols])
-AC_CACHE_VAL(ac_cv_sys_symbol_underscore,
-[ac_cv_sys_symbol_underscore=no
-cat > conftest.$ac_ext <<EOF
-void nm_test_func(){}
-int main(){nm_test_func;return 0;}
-EOF
-if AC_TRY_EVAL(ac_compile); then
-  # Now try to grab the symbols.
-  ac_nlist=conftest.nm
-  if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
-    # See whether the symbols have a leading underscore.
-    if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
-      ac_cv_sys_symbol_underscore=yes
-    else
-      if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
-	:
-      else
-	echo "configure: cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
-      fi
-    fi
-  else
-    echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
-  fi
-else
-  echo "configure: failed program was:" >&AC_FD_CC
-  cat conftest.c >&AC_FD_CC
-fi
-rm -rf conftest*
-])
-AC_MSG_RESULT($ac_cv_sys_symbol_underscore)
-USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no}
-AC_SUBST(USE_SYMBOL_UNDERSCORE)dnl
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN(AC_CHECK_LIBM, [
-AC_CHECK_LIB(mw, _mwvalidcheckl)
-AC_CHECK_LIB(m, cos)
 ])
 
 # AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
@@ -665,13 +462,14 @@ AC_CHECK_LIB(m, cos)
 # '${top_builddir}/' (note the single quotes!) if your package is not
 # flat, and, if you're not using automake, define top_builddir as
 # appropriate in the Makefiles.
-AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [
+AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
   case "$enable_ltdl_convenience" in
   no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
   "") enable_ltdl_convenience=yes
       ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
   esac
   LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
+  INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
 ])
 
 # AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
@@ -683,16 +481,23 @@ AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [
 # flat, and, if you're not using automake, define top_builddir as
 # appropriate in the Makefiles.
 # In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [
-  AC_CHECK_LIB(ltdl, main, LIBLTDL="-lltdl", [
-    case "$enable_ltdl_install" in
-    no) AC_MSG_WARN([libltdl not installed, but installation disabled]) ;;
-    "") enable_ltdl_install=yes
-        ac_configure_args="$ac_configure_args --enable-ltdl-install" ;;
-    esac
+AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+  AC_CHECK_LIB(ltdl, main,
+  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+  [if test x"$enable_ltdl_install" = xno; then
+     AC_MSG_WARN([libltdl not installed, but installation disabled])
+   else
+     enable_ltdl_install=yes
+   fi
   ])
-  if test x"$enable_ltdl_install" != x"no"; then
+  if test x"$enable_ltdl_install" = x"yes"; then
+    ac_configure_args="$ac_configure_args --enable-ltdl-install"
     LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
+    INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
+  else
+    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+    LIBLTDL="-lltdl"
+    INCLTDL=
   fi
 ])
 
@@ -704,9 +509,9 @@ AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
 AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
 AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
 AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
-AC_DEFUN(AM_SYS_NM_PARSE, [indir([AC_SYS_NM_PARSE])])dnl
-AC_DEFUN(AM_SYS_SYMBOL_UNDERSCORE, [indir([AC_SYS_SYMBOL_UNDERSCORE])])dnl
-AC_DEFUN(AM_SYS_LIBTOOL_CYGWIN, [indir([AC_SYS_LIBTOOL_CYGWIN])])dnl
+
+dnl This is just to silence aclocal about the macro not being used
+ifelse([AC_DISABLE_FAST_INSTALL])dnl
 
 # Like AC_CONFIG_HEADER, but automatically create stamp file.
 
diff --git a/ld/configure b/ld/configure
index 4b4ec5e..af6cc25 100755
--- a/ld/configure
+++ b/ld/configure
@@ -20,7 +20,7 @@ ac_help="$ac_help
 ac_help="$ac_help
   --with-gnu-ld           assume the C compiler uses GNU ld [default=no]"
 ac_help="$ac_help
-  --disable-libtool-lock  force libtool not to do file locking"
+  --disable-libtool-lock  avoid locking (might break parallel builds)"
 ac_help="$ac_help
   --enable-targets        alternative target configurations"
 ac_help="$ac_help
@@ -49,6 +49,7 @@ program_suffix=NONE
 program_transform_name=s,x,x,
 silent=
 site=
+sitefile=
 srcdir=
 target=NONE
 verbose=
@@ -163,6 +164,7 @@ Configuration:
   --help                  print this message
   --no-create             do not create output files
   --quiet, --silent       do not print \`checking...' messages
+  --site-file=FILE        use FILE as the site file
   --version               print the version of autoconf that created configure
 Directory and file names:
   --prefix=PREFIX         install architecture-independent files in PREFIX
@@ -333,6 +335,11 @@ EOF
   -site=* | --site=* | --sit=*)
     site="$ac_optarg" ;;
 
+  -site-file | --site-file | --site-fil | --site-fi | --site-f)
+    ac_prev=sitefile ;;
+  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
+    sitefile="$ac_optarg" ;;
+
   -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
     ac_prev=srcdir ;;
   -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
@@ -498,12 +505,16 @@ fi
 srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
 
 # Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
-  if test "x$prefix" != xNONE; then
-    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-  else
-    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+if test -z "$sitefile"; then
+  if test -z "$CONFIG_SITE"; then
+    if test "x$prefix" != xNONE; then
+      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+    else
+      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+    fi
   fi
+else
+  CONFIG_SITE="$sitefile"
 fi
 for ac_site_file in $CONFIG_SITE; do
   if test -r "$ac_site_file"; then
@@ -590,7 +601,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:594: checking host system type" >&5
+echo "configure:605: checking host system type" >&5
 
 host_alias=$host
 case "$host_alias" in
@@ -611,7 +622,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$host" 1>&6
 
 echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:615: checking target system type" >&5
+echo "configure:626: checking target system type" >&5
 
 target_alias=$target
 case "$target_alias" in
@@ -629,7 +640,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$target" 1>&6
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:633: checking build system type" >&5
+echo "configure:644: checking build system type" >&5
 
 build_alias=$build
 case "$build_alias" in
@@ -664,7 +675,7 @@ test "$host_alias" != "$target_alias" &&
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:668: checking for a BSD compatible install" >&5
+echo "configure:679: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -717,7 +728,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
 echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:721: checking whether build environment is sane" >&5
+echo "configure:732: checking whether build environment is sane" >&5
 # Just in case
 sleep 1
 echo timestamp > conftestfile
@@ -774,7 +785,7 @@ test "$program_suffix" != NONE &&
 test "$program_transform_name" = "" && program_transform_name="s,x,x,"
 
 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:778: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:789: checking whether ${MAKE-make} sets \${MAKE}" >&5
 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -820,7 +831,7 @@ EOF
 
 missing_dir=`cd $ac_aux_dir && pwd`
 echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:824: checking for working aclocal" >&5
+echo "configure:835: checking for working aclocal" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -833,7 +844,7 @@ else
 fi
 
 echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:837: checking for working autoconf" >&5
+echo "configure:848: checking for working autoconf" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -846,7 +857,7 @@ else
 fi
 
 echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:850: checking for working automake" >&5
+echo "configure:861: checking for working automake" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -859,7 +870,7 @@ else
 fi
 
 echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:863: checking for working autoheader" >&5
+echo "configure:874: checking for working autoheader" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -872,7 +883,7 @@ else
 fi
 
 echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:876: checking for working makeinfo" >&5
+echo "configure:887: checking for working makeinfo" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -958,7 +969,7 @@ fi
 # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:962: checking for $ac_word" >&5
+echo "configure:973: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -988,7 +999,7 @@ fi
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:992: checking for $ac_word" >&5
+echo "configure:1003: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1018,7 +1029,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1022: checking for $ac_word" >&5
+echo "configure:1033: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1069,7 +1080,7 @@ fi
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1073: checking for $ac_word" >&5
+echo "configure:1084: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1101,7 +1112,7 @@ fi
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1105: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1116: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -1112,12 +1123,12 @@ cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 1116 "configure"
+#line 1127 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:1121: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1132: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -1143,12 +1154,12 @@ if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1147: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1158: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1152: checking whether we are using GNU C" >&5
+echo "configure:1163: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1157,7 +1168,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1161: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1172: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -1176,7 +1187,7 @@ ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1180: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1191: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1219,11 +1230,11 @@ ac_prog=ld
 if test "$ac_cv_prog_gcc" = yes; then
   # Check if gcc -print-prog-name=ld gives a path.
   echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1223: checking for ld used by GCC" >&5
+echo "configure:1234: checking for ld used by GCC" >&5
   ac_prog=`($CC -print-prog-name=ld) 2>&5`
   case "$ac_prog" in
     # Accept absolute paths.
-    /* | [A-Za-z]:[\\/]*)
+    [\\/]* | [A-Za-z]:[\\/]*)
       re_direlt='/[^/][^/]*/\.\./'
       # Canonicalize the path of ld
       ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
@@ -1243,19 +1254,19 @@ echo "configure:1223: checking for ld used by GCC" >&5
   esac
 elif test "$with_gnu_ld" = yes; then
   echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1247: checking for GNU ld" >&5
+echo "configure:1258: checking for GNU ld" >&5
 else
   echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1250: checking for non-GNU ld" >&5
+echo "configure:1261: checking for non-GNU ld" >&5
 fi
 if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
   for ac_dir in $PATH; do
     test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog"; then
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
       ac_cv_path_LD="$ac_dir/$ac_prog"
       # Check to see if the program is GNU ld.  I'd rather use --version,
       # but apparently some GNU ld's only accept -v.
@@ -1280,9 +1291,8 @@ else
   echo "$ac_t""no" 1>&6
 fi
 test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-
 echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1286: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:1296: checking if the linker ($LD) is GNU ld" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1298,7 +1308,7 @@ echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6
 
 
 echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1302: checking for BSD-compatible nm" >&5
+echo "configure:1312: checking for BSD-compatible nm" >&5
 if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1306,10 +1316,10 @@ else
   # Let the user override the test.
   ac_cv_path_NM="$NM"
 else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
   for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
     test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/nm; then
+    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
       # Check to see if the nm accepts a BSD-compat flag.
       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
       #   nm: unknown option "B" ignored
@@ -1333,213 +1343,8 @@ fi
 NM="$ac_cv_path_NM"
 echo "$ac_t""$NM" 1>&6
 
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-echo $ac_n "checking command to parse $NM output""... $ac_c" 1>&6
-echo "configure:1340: checking command to parse $NM output" >&5
-if eval "test \"`echo '$''{'ac_cv_sys_global_symbol_pipe'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  # These are sane defaults that work on at least a few old systems.
-# {They come from Ultrix.  What could be older than Ultrix?!! ;)}
-
-# Character class describing NM global symbol codes.
-ac_symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-ac_symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-# Define system-specific variables.
-case "$host_os" in
-aix*)
-  ac_symcode='[BCDT]'
-  ;;
-cygwin* | mingw*)
-  ac_symcode='[ABCDGISTW]'
-  ;;
-hpux*)
-  ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
-  ;;
-irix*)
-  ac_symcode='[BCDEGRST]'
-  ;;
-solaris*)
-  ac_symcode='[BDT]'
-  ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
-  ac_symcode='[ABCDGISTW]'
-fi
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
-  ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.* 	\($ac_symcode\) 	 	*\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'"
-
-  # Check to see that the pipe works correctly.
-  ac_pipe_works=no
-  rm -f conftest.$ac_ext
-  cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func;return 0;}
-EOF
-
-  if { (eval echo configure:1403: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    # Now try to grab the symbols.
-    ac_nlist=conftest.nm
-  
-    if { (eval echo configure:1407: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then
-
-      # Try sorting and uniquifying the output.
-      if sort "$ac_nlist" | uniq > "$ac_nlist"T; then
-	mv -f "$ac_nlist"T "$ac_nlist"
-      else
-	rm -f "$ac_nlist"T
-      fi
-
-      # Make sure that we snagged all the symbols we need.
-      if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then
-	if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then
-	  cat <<EOF > conftest.c
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
-	  # Now generate the symbol file.
-	  eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c'
-
-	  cat <<EOF >> conftest.c
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
-  const char *name;
-  lt_ptr_t address;
-}
-lt_preloaded_symbols[] =
-{
-EOF
-	sed 's/^. \(.*\) \(.*\)$/  {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c
-	cat <<\EOF >> conftest.c
-  {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
-	  # Now try linking the two files.
-	  mv conftest.$ac_objext conftestm.$ac_objext
-	  ac_save_LIBS="$LIBS"
-	  ac_save_CFLAGS="$CFLAGS"
-	  LIBS="conftestm.$ac_objext"
-	  CFLAGS="$CFLAGS$no_builtin_flag"
-	  if { (eval echo configure:1459: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-	    ac_pipe_works=yes
-	  else
-	    echo "configure: failed program was:" >&5
-	    cat conftest.c >&5
-	  fi
-	  LIBS="$ac_save_LIBS"
-	  CFLAGS="$ac_save_CFLAGS"
-	else
-	  echo "cannot find nm_test_func in $ac_nlist" >&5
-	fi
-      else
-	echo "cannot find nm_test_var in $ac_nlist" >&5
-      fi
-    else
-      echo "cannot run $ac_cv_sys_global_symbol_pipe" >&5
-    fi
-  else
-    echo "$progname: failed program was:" >&5
-    cat conftest.c >&5
-  fi
-  rm -rf conftest*
-
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$ac_pipe_works" = yes; then
-    if test x"$ac_symprfx" = x"_"; then
-      ac_cv_sys_symbol_underscore=yes
-    else
-      ac_cv_sys_symbol_underscore=no
-    fi
-    break
-  else
-    ac_cv_sys_global_symbol_pipe=
-  fi
-done
-
-fi
-
-
-ac_result=yes
-if test -z "$ac_cv_sys_global_symbol_pipe"; then
-   ac_result=no
-fi
-echo "$ac_t""$ac_result" 1>&6
-
-echo $ac_n "checking for _ prefix in compiled symbols""... $ac_c" 1>&6
-echo "configure:1505: checking for _ prefix in compiled symbols" >&5
-if eval "test \"`echo '$''{'ac_cv_sys_symbol_underscore'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  ac_cv_sys_symbol_underscore=no
-cat > conftest.$ac_ext <<EOF
-void nm_test_func(){}
-int main(){nm_test_func;return 0;}
-EOF
-if { (eval echo configure:1514: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  # Now try to grab the symbols.
-  ac_nlist=conftest.nm
-  if { (eval echo configure:1517: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then
-    # See whether the symbols have a leading underscore.
-    if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
-      ac_cv_sys_symbol_underscore=yes
-    else
-      if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
-	:
-      else
-	echo "configure: cannot find nm_test_func in $ac_nlist" >&5
-      fi
-    fi
-  else
-    echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&5
-  fi
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.c >&5
-fi
-rm -rf conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_sys_symbol_underscore" 1>&6
-USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no}
-
 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1543: checking whether ln -s works" >&5
+echo "configure:1348: checking whether ln -s works" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1559,30 +1364,37 @@ else
   echo "$ac_t""no" 1>&6
 fi
 
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
 
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
 
 # Check for any special flags to pass to ltconfig.
 libtool_flags="--cache-file=$cache_file"
 test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
 test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
 test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
 test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
 test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
 
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+  enableval="$enable_libtool_lock"
+  :
+fi
+
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+
 # Some flags need to be propagated to the compiler or linker for good
 # libtool support.
-case "$host" in
+case "$lt_target" in
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 1585 "configure"' > conftest.$ac_ext
-  if { (eval echo configure:1586: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  echo '#line 1397 "configure"' > conftest.$ac_ext
+  if { (eval echo configure:1398: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
     case "`/usr/bin/file conftest.o`" in
     *32-bit*)
       LD="${LD-ld} -32"
@@ -1603,19 +1415,19 @@ case "$host" in
   SAVE_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -belf"
   echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:1607: checking whether the C compiler needs -belf" >&5
+echo "configure:1419: checking whether the C compiler needs -belf" >&5
 if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1612 "configure"
+#line 1424 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:1619: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1431: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   lt_cv_cc_needs_belf=yes
 else
@@ -1634,161 +1446,9 @@ echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
   fi
   ;;
 
-*-*-cygwin*)
-  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1642: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_DLLTOOL"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1674: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  DLLTOOL="false"
-fi
-fi
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1709: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_AS"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1741: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  AS="false"
-fi
-fi
-
-
-  ;;
 
 esac
 
-# enable the --disable-libtool-lock switch
-
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
-  enableval="$enable_libtool_lock"
-  need_locks=$enableval
-else
-  need_locks=yes
-fi
-
-
-if test x"$need_locks" = xno; then
-  libtool_flags="$libtool_flags --disable-lock"
-fi
-
 
 # Save cache, so that ltconfig can load it
 cat > confcache <<\EOF
@@ -1841,10 +1501,11 @@ rm -f confcache
 
 # Actually configure libtool.  ac_aux_dir is where install-sh is found.
 CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
-DLLTOOL="$DLLTOOL" AS="$AS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
 ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
 || { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
 
 # Reload cache, that may have been modified by ltconfig
@@ -1906,7 +1567,7 @@ fi
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1910: checking for $ac_word" >&5
+echo "configure:1571: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1936,7 +1597,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1940: checking for $ac_word" >&5
+echo "configure:1601: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1987,7 +1648,7 @@ fi
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1991: checking for $ac_word" >&5
+echo "configure:1652: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2019,7 +1680,7 @@ fi
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:2023: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1684: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -2030,12 +1691,12 @@ cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 2034 "configure"
+#line 1695 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:2039: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1700: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -2061,12 +1722,12 @@ if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2065: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1726: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2070: checking whether we are using GNU C" >&5
+echo "configure:1731: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2075,7 +1736,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2079: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1740: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -2094,7 +1755,7 @@ ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2098: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1759: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2137,7 +1798,7 @@ fi
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:2141: checking for a BSD compatible install" >&5
+echo "configure:1802: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2192,7 +1853,7 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
 ALL_LINGUAS=
 echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:2196: checking how to run the C preprocessor" >&5
+echo "configure:1857: checking how to run the C preprocessor" >&5
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
@@ -2207,13 +1868,13 @@ else
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp.
   cat > conftest.$ac_ext <<EOF
-#line 2211 "configure"
+#line 1872 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2217: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1878: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -2224,13 +1885,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -E -traditional-cpp"
   cat > conftest.$ac_ext <<EOF
-#line 2228 "configure"
+#line 1889 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2234: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1895: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -2241,13 +1902,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -nologo -E"
   cat > conftest.$ac_ext <<EOF
-#line 2245 "configure"
+#line 1906 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2251: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1912: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -2272,7 +1933,7 @@ fi
 echo "$ac_t""$CPP" 1>&6
 
 echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
-echo "configure:2276: checking for POSIXized ISC" >&5
+echo "configure:1937: checking for POSIXized ISC" >&5
 if test -d /etc/conf/kconfig.d &&
   grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
 then
@@ -2293,12 +1954,12 @@ else
 fi
 
 echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:2297: checking for ANSI C header files" >&5
+echo "configure:1958: checking for ANSI C header files" >&5
 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2302 "configure"
+#line 1963 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 #include <stdarg.h>
@@ -2306,7 +1967,7 @@ else
 #include <float.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2310: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1971: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2323,7 +1984,7 @@ rm -f conftest*
 if test $ac_cv_header_stdc = yes; then
   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 2327 "configure"
+#line 1988 "configure"
 #include "confdefs.h"
 #include <string.h>
 EOF
@@ -2341,7 +2002,7 @@ fi
 if test $ac_cv_header_stdc = yes; then
   # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 2345 "configure"
+#line 2006 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 EOF
@@ -2362,7 +2023,7 @@ if test "$cross_compiling" = yes; then
   :
 else
   cat > conftest.$ac_ext <<EOF
-#line 2366 "configure"
+#line 2027 "configure"
 #include "confdefs.h"
 #include <ctype.h>
 #define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
@@ -2373,7 +2034,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
 exit (0); }
 
 EOF
-if { (eval echo configure:2377: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2038: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   :
 else
@@ -2397,12 +2058,12 @@ EOF
 fi
 
 echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:2401: checking for working const" >&5
+echo "configure:2062: checking for working const" >&5
 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2406 "configure"
+#line 2067 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -2451,7 +2112,7 @@ ccp = (char const *const *) p;
 
 ; return 0; }
 EOF
-if { (eval echo configure:2455: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2116: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_const=yes
 else
@@ -2472,21 +2133,21 @@ EOF
 fi
 
 echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:2476: checking for inline" >&5
+echo "configure:2137: checking for inline" >&5
 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_cv_c_inline=no
 for ac_kw in inline __inline__ __inline; do
   cat > conftest.$ac_ext <<EOF
-#line 2483 "configure"
+#line 2144 "configure"
 #include "confdefs.h"
 
 int main() {
 } $ac_kw foo() {
 ; return 0; }
 EOF
-if { (eval echo configure:2490: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2151: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_inline=$ac_kw; break
 else
@@ -2512,12 +2173,12 @@ EOF
 esac
 
 echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:2516: checking for off_t" >&5
+echo "configure:2177: checking for off_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2521 "configure"
+#line 2182 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -2545,12 +2206,12 @@ EOF
 fi
 
 echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:2549: checking for size_t" >&5
+echo "configure:2210: checking for size_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2554 "configure"
+#line 2215 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -2580,19 +2241,19 @@ fi
 # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
 # for constant arguments.  Useless!
 echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:2584: checking for working alloca.h" >&5
+echo "configure:2245: checking for working alloca.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2589 "configure"
+#line 2250 "configure"
 #include "confdefs.h"
 #include <alloca.h>
 int main() {
 char *p = alloca(2 * sizeof(int));
 ; return 0; }
 EOF
-if { (eval echo configure:2596: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2257: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_header_alloca_h=yes
 else
@@ -2613,12 +2274,12 @@ EOF
 fi
 
 echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:2617: checking for alloca" >&5
+echo "configure:2278: checking for alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2622 "configure"
+#line 2283 "configure"
 #include "confdefs.h"
 
 #ifdef __GNUC__
@@ -2646,7 +2307,7 @@ int main() {
 char *p = (char *) alloca(1);
 ; return 0; }
 EOF
-if { (eval echo configure:2650: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2311: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_func_alloca_works=yes
 else
@@ -2678,12 +2339,12 @@ EOF
 
 
 echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:2682: checking whether alloca needs Cray hooks" >&5
+echo "configure:2343: checking whether alloca needs Cray hooks" >&5
 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2687 "configure"
+#line 2348 "configure"
 #include "confdefs.h"
 #if defined(CRAY) && ! defined(CRAY2)
 webecray
@@ -2708,12 +2369,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6
 if test $ac_cv_os_cray = yes; then
 for ac_func in _getb67 GETB67 getb67; do
   echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2712: checking for $ac_func" >&5
+echo "configure:2373: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2717 "configure"
+#line 2378 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -2736,7 +2397,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2740: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2401: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -2763,7 +2424,7 @@ done
 fi
 
 echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:2767: checking stack direction for C alloca" >&5
+echo "configure:2428: checking stack direction for C alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2771,7 +2432,7 @@ else
   ac_cv_c_stack_direction=0
 else
   cat > conftest.$ac_ext <<EOF
-#line 2775 "configure"
+#line 2436 "configure"
 #include "confdefs.h"
 find_stack_direction ()
 {
@@ -2790,7 +2451,7 @@ main ()
   exit (find_stack_direction() < 0);
 }
 EOF
-if { (eval echo configure:2794: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2455: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_c_stack_direction=1
 else
@@ -2815,17 +2476,17 @@ for ac_hdr in unistd.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2819: checking for $ac_hdr" >&5
+echo "configure:2480: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2824 "configure"
+#line 2485 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2829: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2490: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2854,12 +2515,12 @@ done
 for ac_func in getpagesize
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2858: checking for $ac_func" >&5
+echo "configure:2519: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2863 "configure"
+#line 2524 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -2882,7 +2543,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2886: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2547: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -2907,7 +2568,7 @@ fi
 done
 
 echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:2911: checking for working mmap" >&5
+echo "configure:2572: checking for working mmap" >&5
 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2915,7 +2576,7 @@ else
   ac_cv_func_mmap_fixed_mapped=no
 else
   cat > conftest.$ac_ext <<EOF
-#line 2919 "configure"
+#line 2580 "configure"
 #include "confdefs.h"
 
 /* Thanks to Mike Haertel and Jim Avera for this test.
@@ -3055,7 +2716,7 @@ main()
 }
 
 EOF
-if { (eval echo configure:3059: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2720: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_func_mmap_fixed_mapped=yes
 else
@@ -3083,17 +2744,17 @@ unistd.h values.h sys/param.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3087: checking for $ac_hdr" >&5
+echo "configure:2748: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3092 "configure"
+#line 2753 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3097: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2758: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -3123,12 +2784,12 @@ done
 __argz_count __argz_stringify __argz_next
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3127: checking for $ac_func" >&5
+echo "configure:2788: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3132 "configure"
+#line 2793 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -3151,7 +2812,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:3155: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2816: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -3180,12 +2841,12 @@ done
      for ac_func in stpcpy
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3184: checking for $ac_func" >&5
+echo "configure:2845: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3189 "configure"
+#line 2850 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -3208,7 +2869,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:3212: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2873: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -3242,19 +2903,19 @@ EOF
 
    if test $ac_cv_header_locale_h = yes; then
     echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:3246: checking for LC_MESSAGES" >&5
+echo "configure:2907: checking for LC_MESSAGES" >&5
 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3251 "configure"
+#line 2912 "configure"
 #include "confdefs.h"
 #include <locale.h>
 int main() {
 return LC_MESSAGES
 ; return 0; }
 EOF
-if { (eval echo configure:3258: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2919: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   am_cv_val_LC_MESSAGES=yes
 else
@@ -3275,7 +2936,7 @@ EOF
     fi
   fi
    echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:3279: checking whether NLS is requested" >&5
+echo "configure:2940: checking whether NLS is requested" >&5
         # Check whether --enable-nls or --disable-nls was given.
 if test "${enable_nls+set}" = set; then
   enableval="$enable_nls"
@@ -3295,7 +2956,7 @@ fi
 EOF
 
       echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:3299: checking whether included gettext is requested" >&5
+echo "configure:2960: checking whether included gettext is requested" >&5
       # Check whether --with-included-gettext or --without-included-gettext was given.
 if test "${with_included_gettext+set}" = set; then
   withval="$with_included_gettext"
@@ -3314,17 +2975,17 @@ fi
 
 	ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:3318: checking for libintl.h" >&5
+echo "configure:2979: checking for libintl.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3323 "configure"
+#line 2984 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3328: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2989: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -3341,19 +3002,19 @@ fi
 if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:3345: checking for gettext in libc" >&5
+echo "configure:3006: checking for gettext in libc" >&5
 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3350 "configure"
+#line 3011 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 int main() {
 return (int) gettext ("")
 ; return 0; }
 EOF
-if { (eval echo configure:3357: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3018: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gt_cv_func_gettext_libc=yes
 else
@@ -3369,7 +3030,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6
 
 	   if test "$gt_cv_func_gettext_libc" != "yes"; then
 	     echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:3373: checking for bindtextdomain in -lintl" >&5
+echo "configure:3034: checking for bindtextdomain in -lintl" >&5
 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -3377,7 +3038,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lintl  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3381 "configure"
+#line 3042 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3388,7 +3049,7 @@ int main() {
 bindtextdomain()
 ; return 0; }
 EOF
-if { (eval echo configure:3392: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3053: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -3404,19 +3065,19 @@ fi
 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:3408: checking for gettext in libintl" >&5
+echo "configure:3069: checking for gettext in libintl" >&5
 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3413 "configure"
+#line 3074 "configure"
 #include "confdefs.h"
 
 int main() {
 return (int) gettext ("")
 ; return 0; }
 EOF
-if { (eval echo configure:3420: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3081: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gt_cv_func_gettext_libintl=yes
 else
@@ -3444,7 +3105,7 @@ EOF
 	      # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3448: checking for $ac_word" >&5
+echo "configure:3109: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3478,12 +3139,12 @@ fi
 		for ac_func in dcgettext
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3482: checking for $ac_func" >&5
+echo "configure:3143: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3487 "configure"
+#line 3148 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -3506,7 +3167,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:3510: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3171: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -3533,7 +3194,7 @@ done
 		# Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3537: checking for $ac_word" >&5
+echo "configure:3198: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3569,7 +3230,7 @@ fi
 		# Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3573: checking for $ac_word" >&5
+echo "configure:3234: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3601,7 +3262,7 @@ else
 fi
 
 		cat > conftest.$ac_ext <<EOF
-#line 3605 "configure"
+#line 3266 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -3609,7 +3270,7 @@ extern int _nl_msg_cat_cntr;
 			       return _nl_msg_cat_cntr
 ; return 0; }
 EOF
-if { (eval echo configure:3613: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3274: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   CATOBJEXT=.gmo
 		   DATADIRNAME=share
@@ -3641,7 +3302,7 @@ fi
         # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3645: checking for $ac_word" >&5
+echo "configure:3306: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3675,7 +3336,7 @@ fi
         # Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3679: checking for $ac_word" >&5
+echo "configure:3340: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3711,7 +3372,7 @@ fi
         # Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3715: checking for $ac_word" >&5
+echo "configure:3376: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3801,7 +3462,7 @@ fi
        LINGUAS=
      else
        echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:3805: checking for catalogs to be installed" >&5
+echo "configure:3466: checking for catalogs to be installed" >&5
        NEW_LINGUAS=
        for lang in ${LINGUAS=$ALL_LINGUAS}; do
          case "$ALL_LINGUAS" in
@@ -3829,17 +3490,17 @@ echo "configure:3805: checking for catalogs to be installed" >&5
       if test "$CATOBJEXT" = ".cat"; then
 	 ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:3833: checking for linux/version.h" >&5
+echo "configure:3494: checking for linux/version.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3838 "configure"
+#line 3499 "configure"
 #include "confdefs.h"
 #include <linux/version.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3843: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3504: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -3902,12 +3563,12 @@ fi
   
 
 echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:3906: checking for Cygwin environment" >&5
+echo "configure:3567: checking for Cygwin environment" >&5
 if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3911 "configure"
+#line 3572 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -3918,7 +3579,7 @@ int main() {
 return __CYGWIN__;
 ; return 0; }
 EOF
-if { (eval echo configure:3922: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3583: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_cygwin=yes
 else
@@ -3935,19 +3596,19 @@ echo "$ac_t""$ac_cv_cygwin" 1>&6
 CYGWIN=
 test "$ac_cv_cygwin" = yes && CYGWIN=yes
 echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:3939: checking for mingw32 environment" >&5
+echo "configure:3600: checking for mingw32 environment" >&5
 if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3944 "configure"
+#line 3605 "configure"
 #include "confdefs.h"
 
 int main() {
 return __MINGW32__;
 ; return 0; }
 EOF
-if { (eval echo configure:3951: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3612: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_mingw32=yes
 else
@@ -3966,7 +3627,7 @@ test "$ac_cv_mingw32" = yes && MINGW32=yes
 
 
 echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:3970: checking for executable suffix" >&5
+echo "configure:3631: checking for executable suffix" >&5
 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3976,10 +3637,10 @@ else
   rm -f conftest*
   echo 'int main () { return 0; }' > conftest.$ac_ext
   ac_cv_exeext=
-  if { (eval echo configure:3980: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+  if { (eval echo configure:3641: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
     for file in conftest.*; do
       case $file in
-      *.c | *.o | *.obj) ;;
+      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
       *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
       esac
     done
@@ -4002,7 +3663,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4006: checking for $ac_word" >&5
+echo "configure:3667: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4038,7 +3699,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4042: checking for $ac_word" >&5
+echo "configure:3703: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4071,7 +3732,7 @@ test -n "$LEX" || LEX=""$missing_dir/missing flex""
 # Extract the first word of "flex", so it can be a program name with args.
 set dummy flex; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4075: checking for $ac_word" >&5
+echo "configure:3736: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4105,7 +3766,7 @@ then
   *) ac_lib=l ;;
   esac
   echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
-echo "configure:4109: checking for yywrap in -l$ac_lib" >&5
+echo "configure:3770: checking for yywrap in -l$ac_lib" >&5
 ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -4113,7 +3774,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-l$ac_lib  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 4117 "configure"
+#line 3778 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -4124,7 +3785,7 @@ int main() {
 yywrap()
 ; return 0; }
 EOF
-if { (eval echo configure:4128: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3789: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -4147,7 +3808,7 @@ fi
 fi
 
 echo $ac_n "checking lex output file root""... $ac_c" 1>&6
-echo "configure:4151: checking lex output file root" >&5
+echo "configure:3812: checking lex output file root" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4168,7 +3829,7 @@ echo "$ac_t""$ac_cv_prog_lex_root" 1>&6
 LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
 
 echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6
-echo "configure:4172: checking whether yytext is a pointer" >&5
+echo "configure:3833: checking whether yytext is a pointer" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4180,14 +3841,14 @@ echo 'extern char *yytext;' >>$LEX_OUTPUT_ROOT.c
 ac_save_LIBS="$LIBS"
 LIBS="$LIBS $LEXLIB"
 cat > conftest.$ac_ext <<EOF
-#line 4184 "configure"
+#line 3845 "configure"
 #include "confdefs.h"
 `cat $LEX_OUTPUT_ROOT.c`
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:4191: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3852: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_prog_lex_yytext_pointer=yes
 else
@@ -4210,7 +3871,7 @@ fi
 
 
 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:4214: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:3875: checking whether to enable maintainer-specific portions of Makefiles" >&5
     # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"
@@ -4244,17 +3905,17 @@ for ac_hdr in string.h strings.h stdlib.h unistd.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4248: checking for $ac_hdr" >&5
+echo "configure:3909: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4253 "configure"
+#line 3914 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4258: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3919: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -4283,12 +3944,12 @@ done
 for ac_func in sbrk
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4287: checking for $ac_func" >&5
+echo "configure:3948: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4292 "configure"
+#line 3953 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -4311,7 +3972,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:4315: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3976: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -4340,12 +4001,12 @@ for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6
-echo "configure:4344: checking for $ac_hdr that defines DIR" >&5
+echo "configure:4005: checking for $ac_hdr that defines DIR" >&5
 if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4349 "configure"
+#line 4010 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <$ac_hdr>
@@ -4353,7 +4014,7 @@ int main() {
 DIR *dirp = 0;
 ; return 0; }
 EOF
-if { (eval echo configure:4357: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4018: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   eval "ac_cv_header_dirent_$ac_safe=yes"
 else
@@ -4378,7 +4039,7 @@ done
 # Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
 if test $ac_header_dirent = dirent.h; then
 echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6
-echo "configure:4382: checking for opendir in -ldir" >&5
+echo "configure:4043: checking for opendir in -ldir" >&5
 ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -4386,7 +4047,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-ldir  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 4390 "configure"
+#line 4051 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -4397,7 +4058,7 @@ int main() {
 opendir()
 ; return 0; }
 EOF
-if { (eval echo configure:4401: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4062: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -4419,7 +4080,7 @@ fi
 
 else
 echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6
-echo "configure:4423: checking for opendir in -lx" >&5
+echo "configure:4084: checking for opendir in -lx" >&5
 ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -4427,7 +4088,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lx  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 4431 "configure"
+#line 4092 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -4438,7 +4099,7 @@ int main() {
 opendir()
 ; return 0; }
 EOF
-if { (eval echo configure:4442: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4103: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -4471,12 +4132,12 @@ EOF
 esac
 
 echo $ac_n "checking whether strstr must be declared""... $ac_c" 1>&6
-echo "configure:4475: checking whether strstr must be declared" >&5
+echo "configure:4136: checking whether strstr must be declared" >&5
 if eval "test \"`echo '$''{'bfd_cv_decl_needed_strstr'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4480 "configure"
+#line 4141 "configure"
 #include "confdefs.h"
 
 #include <stdio.h>
@@ -4497,7 +4158,7 @@ int main() {
 char *(*pfn) = (char *(*)) strstr
 ; return 0; }
 EOF
-if { (eval echo configure:4501: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4162: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   bfd_cv_decl_needed_strstr=no
 else
@@ -4518,12 +4179,12 @@ EOF
 fi
 
 echo $ac_n "checking whether free must be declared""... $ac_c" 1>&6
-echo "configure:4522: checking whether free must be declared" >&5
+echo "configure:4183: checking whether free must be declared" >&5
 if eval "test \"`echo '$''{'bfd_cv_decl_needed_free'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4527 "configure"
+#line 4188 "configure"
 #include "confdefs.h"
 
 #include <stdio.h>
@@ -4544,7 +4205,7 @@ int main() {
 char *(*pfn) = (char *(*)) free
 ; return 0; }
 EOF
-if { (eval echo configure:4548: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4209: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   bfd_cv_decl_needed_free=no
 else
@@ -4565,12 +4226,12 @@ EOF
 fi
 
 echo $ac_n "checking whether sbrk must be declared""... $ac_c" 1>&6
-echo "configure:4569: checking whether sbrk must be declared" >&5
+echo "configure:4230: checking whether sbrk must be declared" >&5
 if eval "test \"`echo '$''{'bfd_cv_decl_needed_sbrk'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4574 "configure"
+#line 4235 "configure"
 #include "confdefs.h"
 
 #include <stdio.h>
@@ -4591,7 +4252,7 @@ int main() {
 char *(*pfn) = (char *(*)) sbrk
 ; return 0; }
 EOF
-if { (eval echo configure:4595: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4256: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   bfd_cv_decl_needed_sbrk=no
 else
@@ -4612,12 +4273,12 @@ EOF
 fi
 
 echo $ac_n "checking whether getenv must be declared""... $ac_c" 1>&6
-echo "configure:4616: checking whether getenv must be declared" >&5
+echo "configure:4277: checking whether getenv must be declared" >&5
 if eval "test \"`echo '$''{'bfd_cv_decl_needed_getenv'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4621 "configure"
+#line 4282 "configure"
 #include "confdefs.h"
 
 #include <stdio.h>
@@ -4638,7 +4299,7 @@ int main() {
 char *(*pfn) = (char *(*)) getenv
 ; return 0; }
 EOF
-if { (eval echo configure:4642: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4303: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   bfd_cv_decl_needed_getenv=no
 else
@@ -4659,12 +4320,12 @@ EOF
 fi
 
 echo $ac_n "checking whether environ must be declared""... $ac_c" 1>&6
-echo "configure:4663: checking whether environ must be declared" >&5
+echo "configure:4324: checking whether environ must be declared" >&5
 if eval "test \"`echo '$''{'bfd_cv_decl_needed_environ'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4668 "configure"
+#line 4329 "configure"
 #include "confdefs.h"
 
 #include <stdio.h>
@@ -4685,7 +4346,7 @@ int main() {
 char *(*pfn) = (char *(*)) environ
 ; return 0; }
 EOF
-if { (eval echo configure:4689: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4350: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   bfd_cv_decl_needed_environ=no
 else
@@ -4713,19 +4374,19 @@ fi
 # constants, while still supporting pre-ANSI compilers which do not
 # support string concatenation.
 echo $ac_n "checking whether ANSI C string concatenation works""... $ac_c" 1>&6
-echo "configure:4717: checking whether ANSI C string concatenation works" >&5
+echo "configure:4378: checking whether ANSI C string concatenation works" >&5
 if eval "test \"`echo '$''{'ld_cv_string_concatenation'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4722 "configure"
+#line 4383 "configure"
 #include "confdefs.h"
 
 int main() {
 char *a = "a" "a";
 ; return 0; }
 EOF
-if { (eval echo configure:4729: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4390: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ld_cv_string_concatenation=yes
 else
@@ -5012,12 +4673,7 @@ s%@MAKEINFO@%$MAKEINFO%g
 s%@SET_MAKE@%$SET_MAKE%g
 s%@RANLIB@%$RANLIB%g
 s%@CC@%$CC%g
-s%@LD@%$LD%g
-s%@NM@%$NM%g
-s%@USE_SYMBOL_UNDERSCORE@%$USE_SYMBOL_UNDERSCORE%g
 s%@LN_S@%$LN_S%g
-s%@DLLTOOL@%$DLLTOOL%g
-s%@AS@%$AS%g
 s%@LIBTOOL@%$LIBTOOL%g
 s%@CPP@%$CPP%g
 s%@ALLOCA@%$ALLOCA%g
diff --git a/ld/po/POTFILES.in b/ld/po/POTFILES.in
index fea0c8e..f7a614d 100644
--- a/ld/po/POTFILES.in
+++ b/ld/po/POTFILES.in
@@ -26,3 +26,4 @@ lexsup.c
 mri.c
 mri.h
 pe-dll.c
+pe-dll.h
diff --git a/ld/po/ld.pot b/ld/po/ld.pot
index 43034ce..c1670e1 100644
--- a/ld/po/ld.pot
+++ b/ld/po/ld.pot
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 1999-06-03 03:11-0700\n"
+"POT-Creation-Date: 2000-02-25 22:20-0500\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -14,178 +14,210 @@ msgstr ""
 "Content-Type: text/plain; charset=CHARSET\n"
 "Content-Transfer-Encoding: ENCODING\n"
 
-#: emultempl/armcoff.em:65
+#: emultempl/armcoff.em:69
 msgid "  --support-old-code   Support interworking with old code\n"
 msgstr ""
 
-#: emultempl/armcoff.em:130
+#: emultempl/armcoff.em:70
+msgid "  --thumb-entry=<sym>  Set the entry point to be Thumb symbol <sym>\n"
+msgstr ""
+
+#: emultempl/armcoff.em:139
 #, c-format
 msgid "Errors encountered processing file %s"
 msgstr ""
 
-#: emultempl/pe.em:198
+#: emultempl/armcoff.em:205 emultempl/pe.em:1030
+msgid "%P: warning: '--thumb-entry %s' is overriding '-e %s'\n"
+msgstr ""
+
+#: emultempl/armcoff.em:210 emultempl/pe.em:1035
+msgid "%P: warning: connot find thumb start symbol %s\n"
+msgstr ""
+
+#: emultempl/pe.em:255
 msgid ""
 "  --base_file <basefile>             Generate a base file for relocatable "
 "DLLs\n"
 msgstr ""
 
-#: emultempl/pe.em:199
+#: emultempl/pe.em:256
 msgid ""
 "  --dll                              Set image base to the default for DLLs\n"
 msgstr ""
 
-#: emultempl/pe.em:200
+#: emultempl/pe.em:257
 msgid "  --file-alignment <size>            Set file alignment\n"
 msgstr ""
 
-#: emultempl/pe.em:201
+#: emultempl/pe.em:258
 msgid "  --heap <size>                      Set initial size of the heap\n"
 msgstr ""
 
-#: emultempl/pe.em:202
+#: emultempl/pe.em:259
 msgid ""
 "  --image-base <address>             Set start address of the executable\n"
 msgstr ""
 
-#: emultempl/pe.em:203
+#: emultempl/pe.em:260
 msgid ""
 "  --major-image-version <number>     Set version number of the executable\n"
 msgstr ""
 
-#: emultempl/pe.em:204
+#: emultempl/pe.em:261
 msgid "  --major-os-version <number>        Set minimum required OS version\n"
 msgstr ""
 
-#: emultempl/pe.em:205
+#: emultempl/pe.em:262
 msgid ""
 "  --major-subsystem-version <number> Set minimum required OS subsystem "
 "version\n"
 msgstr ""
 
-#: emultempl/pe.em:206
+#: emultempl/pe.em:263
 msgid ""
 "  --minor-image-version <number>     Set revision number of the executable\n"
 msgstr ""
 
-#: emultempl/pe.em:207
+#: emultempl/pe.em:264
 msgid "  --minor-os-version <number>        Set minimum required OS revision\n"
 msgstr ""
 
-#: emultempl/pe.em:208
+#: emultempl/pe.em:265
 msgid ""
 "  --minor-subsystem-version <number> Set minimum required OS subsystem "
 "revision\n"
 msgstr ""
 
-#: emultempl/pe.em:209
+#: emultempl/pe.em:266
 msgid "  --section-alignment <size>         Set section alignment\n"
 msgstr ""
 
-#: emultempl/pe.em:210
+#: emultempl/pe.em:267
 msgid "  --stack <size>                     Set size of the initial stack\n"
 msgstr ""
 
-#: emultempl/pe.em:211
+#: emultempl/pe.em:268
 msgid ""
 "  --subsystem <name>[:<version>]     Set required OS subsystem [& version]\n"
 msgstr ""
 
-#: emultempl/pe.em:212
+#: emultempl/pe.em:269
 msgid ""
 "  --support-old-code                 Support interworking with old code\n"
 msgstr ""
 
-#: emultempl/pe.em:214
+#: emultempl/pe.em:270
+msgid ""
+"  --thumb-entry=<symbol>             Set the entry point to be Thumb "
+"<symbol>\n"
+msgstr ""
+
+#: emultempl/pe.em:272
 msgid ""
 "  --add-stdcall-alias                Export symbols with and without @nn\n"
 msgstr ""
 
-#: emultempl/pe.em:215
+#: emultempl/pe.em:273
 msgid "  --disable-stdcall-fixup            Don't link _sym to _sym@nn\n"
 msgstr ""
 
-#: emultempl/pe.em:216
+#: emultempl/pe.em:274
 msgid ""
 "  --enable-stdcall-fixup             Link _sym to _sym@nn without warnings\n"
 msgstr ""
 
-#: emultempl/pe.em:217
+#: emultempl/pe.em:275
 msgid ""
 "  --exclude-symbols sym,sym,...      Exclude symbols from automatic export\n"
 msgstr ""
 
-#: emultempl/pe.em:218
+#: emultempl/pe.em:276
 msgid ""
 "  --export-all-symbols               Automatically export all globals to "
 "DLL\n"
 msgstr ""
 
-#: emultempl/pe.em:219
+#: emultempl/pe.em:277
 msgid "  --kill-at                          Remove @nn from exported symbols\n"
 msgstr ""
 
-#: emultempl/pe.em:220
+#: emultempl/pe.em:278
 msgid "  --out-implib <file>                Generate import library\n"
 msgstr ""
 
-#: emultempl/pe.em:221
+#: emultempl/pe.em:279
 msgid ""
 "  --output-def <file>                Generate a .DEF file for the built DLL\n"
 msgstr ""
 
-#: emultempl/pe.em:284
+#: emultempl/pe.em:280
+msgid "  --warn-duplicate-exports           Warn about duplicate exports.\n"
+msgstr ""
+
+#: emultempl/pe.em:281
+msgid ""
+"  --compat-implib                    Create backward compatible import "
+"libs;\n"
+msgstr ""
+
+#: emultempl/pe.em:282
+msgid "                                       create __imp_<SYMBOL> as well.\n"
+msgstr ""
+
+#: emultempl/pe.em:350
 msgid "%P: warning: bad version number in -subsystem option\n"
 msgstr ""
 
-#: emultempl/pe.em:300
+#: emultempl/pe.em:386
 msgid "%P%F: invalid subsystem type %s\n"
 msgstr ""
 
-#: emultempl/pe.em:315
+#: emultempl/pe.em:401
 msgid "%P%F: invalid hex number for PE parameter '%s'\n"
 msgstr ""
 
-#: emultempl/pe.em:333
+#: emultempl/pe.em:419
 msgid "%P%F: strange hex info for PE parameter '%s'\n"
 msgstr ""
 
-#: emultempl/pe.em:372
+#: emultempl/pe.em:458
 #, c-format
 msgid "%s: Can't open base file %s\n"
 msgstr ""
 
-#: emultempl/pe.em:505
+#: emultempl/pe.em:600
 msgid "%P: warning, file alignment > section alignment.\n"
 msgstr ""
 
-#: emultempl/pe.em:575 emultempl/pe.em:601
+#: emultempl/pe.em:670 emultempl/pe.em:696
 #, c-format
 msgid "Warning: resolving %s by linking to %s\n"
 msgstr ""
 
-#: emultempl/pe.em:580 emultempl/pe.em:606
+#: emultempl/pe.em:675 emultempl/pe.em:701
 msgid "Use --enable-stdcall-fixup to disable these warnings\n"
 msgstr ""
 
-#: emultempl/pe.em:581 emultempl/pe.em:607
+#: emultempl/pe.em:676 emultempl/pe.em:702
 msgid "Use --disable-stdcall-fixup to disable these fixups\n"
 msgstr ""
 
-#: emultempl/pe.em:623
+#: emultempl/pe.em:718
 msgid "%F%P: PE operations on non PE file.\n"
 msgstr ""
 
-#: emultempl/pe.em:724
+#: emultempl/pe.em:835
 #, c-format
 msgid "Errors encountered processing file %s\n"
 msgstr ""
 
-#: emultempl/pe.em:747
+#: emultempl/pe.em:858
 #, c-format
 msgid "Errors encountered processing file %s for interworking"
 msgstr ""
 
-#: emultempl/pe.em:802 ldlang.c:1657 ldlang.c:3934 ldlang.c:3968 ldmain.c:992
+#: emultempl/pe.em:913 ldlang.c:1961 ldlang.c:4333 ldlang.c:4367 ldmain.c:996
 msgid "%P%F: bfd_link_hash_lookup failed: %E\n"
 msgstr ""
 
@@ -224,11 +256,11 @@ msgstr ""
 msgid "%B%F: could not read symbols; %E\n"
 msgstr ""
 
-#: ldcref.c:445 ldmain.c:1060 ldmain.c:1064
+#: ldcref.c:445 ldmain.c:1064 ldmain.c:1068
 msgid "%B%F: could not read symbols: %E\n"
 msgstr ""
 
-#: ldcref.c:517 ldcref.c:524 ldmain.c:1110 ldmain.c:1117
+#: ldcref.c:517 ldcref.c:524 ldmain.c:1114 ldmain.c:1121
 msgid "%B%F: could not read relocs: %E\n"
 msgstr ""
 
@@ -263,307 +295,328 @@ msgid ""
 "\n"
 msgstr ""
 
-#: ldemul.c:223
+#: ldemul.c:224
 msgid "%S SYSLIB ignored\n"
 msgstr ""
 
-#: ldemul.c:231
+#: ldemul.c:232
 msgid "%S HLL ignored\n"
 msgstr ""
 
-#: ldemul.c:252
+#: ldemul.c:253
 msgid "%P: unrecognised emulation mode: %s\n"
 msgstr ""
 
-#: ldemul.c:253
+#: ldemul.c:254
 msgid "Supported emulations: "
 msgstr ""
 
-#: ldemul.c:297
+#: ldemul.c:298
 msgid "  no emulation specific options.\n"
 msgstr ""
 
-#: ldexp.c:156
+#: ldexp.c:157
 msgid "%F%P: %s uses undefined section %s\n"
 msgstr ""
 
-#: ldexp.c:158
+#: ldexp.c:159
 msgid "%F%P: %s forward reference of section %s\n"
 msgstr ""
 
-#: ldexp.c:270
+#: ldexp.c:271
 msgid "%F%S %% by zero\n"
 msgstr ""
 
-#: ldexp.c:277
+#: ldexp.c:278
 msgid "%F%S / by zero\n"
 msgstr ""
 
-#: ldexp.c:400
+#: ldexp.c:401
 msgid "%X%S: unresolvable symbol `%s' referenced in expression\n"
 msgstr ""
 
-#: ldexp.c:419
+#: ldexp.c:420
 msgid "%F%S: undefined symbol `%s' referenced in expression\n"
 msgstr ""
 
-#: ldexp.c:600
+#: ldexp.c:602
 msgid "%F%S can not PROVIDE assignment to location counter\n"
 msgstr ""
 
-#: ldexp.c:610
+#: ldexp.c:612
 msgid "%F%S invalid assignment to location counter\n"
 msgstr ""
 
-#: ldexp.c:614
+#: ldexp.c:616
 msgid "%F%S assignment to location counter invalid outside of SECTION\n"
 msgstr ""
 
-#: ldexp.c:624
+#: ldexp.c:626
 msgid "%F%S cannot move location counter backwards (from %V to %V)\n"
 msgstr ""
 
-#: ldexp.c:652
+#: ldexp.c:654
 msgid "%P%F:%s: hash creation failed\n"
 msgstr ""
 
-#: ldexp.c:949
+#: ldexp.c:951
 msgid "%F%S nonconstant expression for %s\n"
 msgstr ""
 
-#: ldexp.c:982
+#: ldexp.c:984
 msgid "%F%S non constant expression for %s\n"
 msgstr ""
 
-#: ldfile.c:109
+#: ldfile.c:106
 #, c-format
 msgid "attempt to open %s failed\n"
 msgstr ""
 
-#: ldfile.c:111
+#: ldfile.c:108
 #, c-format
 msgid "attempt to open %s succeeded\n"
 msgstr ""
 
-#: ldfile.c:119
+#: ldfile.c:114
 msgid "%F%P: invalid BFD target `%s'\n"
 msgstr ""
 
-#: ldfile.c:204
+#: ldfile.c:136
+msgid "%P: skipping incompatible %s when searching for %s"
+msgstr ""
+
+#: ldfile.c:227
 msgid "%F%P: cannot open %s for %s: %E\n"
 msgstr ""
 
-#: ldfile.c:207
+#: ldfile.c:230
 msgid "%F%P: cannot open %s: %E\n"
 msgstr ""
 
-#: ldfile.c:225
+#: ldfile.c:250
 msgid "%F%P: cannot find %s\n"
 msgstr ""
 
-#: ldfile.c:243 ldfile.c:258
+#: ldfile.c:268 ldfile.c:283
 #, c-format
 msgid "cannot find script file %s\n"
 msgstr ""
 
-#: ldfile.c:245 ldfile.c:260
+#: ldfile.c:270 ldfile.c:285
 #, c-format
 msgid "opened script file %s\n"
 msgstr ""
 
-#: ldfile.c:303
+#: ldfile.c:328
 msgid "%P%F: cannot open linker script file %s: %E\n"
 msgstr ""
 
-#: ldfile.c:344
+#: ldfile.c:369
 msgid "%P%F: unknown architecture: %s\n"
 msgstr ""
 
-#: ldfile.c:361
+#: ldfile.c:386
 msgid "%P%F: target architecture respecified\n"
 msgstr ""
 
-#: ldfile.c:414
+#: ldfile.c:439
 msgid "%P%F: cannot represent machine `%s'\n"
 msgstr ""
 
-#: ldlang.c:723
+#: ldlang.c:736
 msgid ""
 "\n"
 "Memory Configuration\n"
 "\n"
 msgstr ""
 
-#: ldlang.c:725
+#: ldlang.c:738
 msgid "Name"
 msgstr ""
 
-#: ldlang.c:725
+#: ldlang.c:738
 msgid "Origin"
 msgstr ""
 
-#: ldlang.c:725
+#: ldlang.c:738
 msgid "Length"
 msgstr ""
 
-#: ldlang.c:725
+#: ldlang.c:738
 msgid "Attributes"
 msgstr ""
 
-#: ldlang.c:767
+#: ldlang.c:780
 msgid ""
 "\n"
 "Linker script and memory map\n"
 "\n"
 msgstr ""
 
-#: ldlang.c:784
+#: ldlang.c:797
 msgid "%P%F: Illegal use of `%s' section"
 msgstr ""
 
-#: ldlang.c:794
+#: ldlang.c:807
 msgid "%P%F: output format %s cannot represent section called %s\n"
 msgstr ""
 
-#: ldlang.c:915
+#: ldlang.c:970
 msgid "%P: %B: warning: ignoring duplicate section `%s'\n"
 msgstr ""
 
-#: ldlang.c:929
+#: ldlang.c:973
+msgid "%P: %B: warning: ignoring duplicate `%s' section symbol `%s'\n"
+msgstr ""
+
+#: ldlang.c:987
 msgid "%P: %B: warning: duplicate section `%s' has different size\n"
 msgstr ""
 
-#: ldlang.c:1320
+#: ldlang.c:1039
+msgid "%P%F: Failed to create hash table\n"
+msgstr ""
+
+#: ldlang.c:1422
 msgid "%B: file not recognized: %E\n"
 msgstr ""
 
-#: ldlang.c:1321
+#: ldlang.c:1423
 msgid "%B: matching formats:"
 msgstr ""
 
-#: ldlang.c:1328
+#: ldlang.c:1430
 msgid "%F%B: file not recognized: %E\n"
 msgstr ""
 
-#: ldlang.c:1381
+#: ldlang.c:1483
 msgid "%F%B: object %B in archive is not object\n"
 msgstr ""
 
-#: ldlang.c:1387 ldlang.c:1399
+#: ldlang.c:1489 ldlang.c:1501
 msgid "%F%B: could not read symbols: %E\n"
 msgstr ""
 
-#: ldlang.c:1452
+#: ldlang.c:1747
+msgid ""
+"%P: warning: could not find any targets that match endianness requirement\n"
+msgstr ""
+
+#: ldlang.c:1759
 msgid "%P%F: target %s not found\n"
 msgstr ""
 
-#: ldlang.c:1454
+#: ldlang.c:1761
 msgid "%P%F: cannot open output file %s: %E\n"
 msgstr ""
 
-#: ldlang.c:1462
+#: ldlang.c:1769
 msgid "%P%F:%s: can not make object file: %E\n"
 msgstr ""
 
-#: ldlang.c:1466
+#: ldlang.c:1773
 msgid "%P%F:%s: can not set architecture: %E\n"
 msgstr ""
 
-#: ldlang.c:1470
+#: ldlang.c:1777
 msgid "%P%F: can not create link hash table: %E\n"
 msgstr ""
 
-#: ldlang.c:1780
+#: ldlang.c:2084
 msgid " load address 0x%V"
 msgstr ""
 
-#: ldlang.c:1909
+#: ldlang.c:2214
 msgid "%W (size before relaxing)\n"
 msgstr ""
 
-#: ldlang.c:1988
+#: ldlang.c:2296
 #, c-format
 msgid "Address of section %s set to "
 msgstr ""
 
-#: ldlang.c:2127
+#: ldlang.c:2445
 #, c-format
 msgid "Fail with %d\n"
 msgstr ""
 
-#: ldlang.c:2357
+#: ldlang.c:2684
 msgid "%X%P: section %s [%V -> %V] overlaps section %s [%V -> %V]\n"
 msgstr ""
 
-#: ldlang.c:2408
+#: ldlang.c:2718
+msgid "%X%P: address 0x%v of %B section %s is not within region %s\n"
+msgstr ""
+
+#: ldlang.c:2726
+msgid "%X%P: region %s is full (%B section %s)\n"
+msgstr ""
+
+#: ldlang.c:2775
 msgid "%P%X: Internal error on COFF shared library section %s\n"
 msgstr ""
 
-#: ldlang.c:2449
+#: ldlang.c:2816
 msgid "%P: warning: no memory region specified for section `%s'\n"
 msgstr ""
 
-#: ldlang.c:2462
+#: ldlang.c:2829
 msgid "%P: warning: changing start of section %s by %u bytes\n"
 msgstr ""
 
-#: ldlang.c:2476
+#: ldlang.c:2843
 msgid "%F%S: non constant address expression for section %s\n"
 msgstr ""
 
-#: ldlang.c:2528
-msgid "%X%P: address 0x%v of %B section %s is not within region %s\n"
-msgstr ""
-
-#: ldlang.c:2536
-msgid "%X%P: region %s is full (%B section %s)\n"
+#: ldlang.c:2907
+msgid "%X%P: use an absolute load address or a load memory region, not both\n"
 msgstr ""
 
-#: ldlang.c:2638
+#: ldlang.c:3020
 msgid "%P%F: can't relax section: %E\n"
 msgstr ""
 
-#: ldlang.c:2799
+#: ldlang.c:3185
 msgid "%F%P: invalid data statement\n"
 msgstr ""
 
-#: ldlang.c:2828
+#: ldlang.c:3222
 msgid "%F%P: invalid reloc statement\n"
 msgstr ""
 
-#: ldlang.c:2962
+#: ldlang.c:3358
 msgid "%P%F:%s: can't set start address\n"
 msgstr ""
 
-#: ldlang.c:2975 ldlang.c:2992
+#: ldlang.c:3371 ldlang.c:3388
 msgid "%P%F: can't set start address\n"
 msgstr ""
 
-#: ldlang.c:2987
+#: ldlang.c:3383
 msgid "%P: warning: cannot find entry symbol %s; defaulting to %V\n"
 msgstr ""
 
-#: ldlang.c:2997
+#: ldlang.c:3393
 msgid "%P: warning: cannot find entry symbol %s; not setting start address\n"
 msgstr ""
 
-#: ldlang.c:3039
+#: ldlang.c:3435
 msgid ""
 "%P: warning: %s architecture of input file `%B' is incompatible with %s "
 "output\n"
 msgstr ""
 
-#: ldlang.c:3057
+#: ldlang.c:3453
 msgid "%E%X: failed to merge target specific data of file %B\n"
 msgstr ""
 
-#: ldlang.c:3142
+#: ldlang.c:3540
 msgid ""
 "\n"
 "Allocating common symbols\n"
 msgstr ""
 
-#: ldlang.c:3143
+#: ldlang.c:3541
 msgid ""
 "Common symbol       size              file\n"
 "\n"
@@ -572,43 +625,43 @@ msgstr ""
 #. This message happens when using the
 #. svr3.ifile linker script, so I have
 #. disabled it.
-#: ldlang.c:3232
+#: ldlang.c:3626
 msgid "%P: no [COMMON] command, defaulting to .bss\n"
 msgstr ""
 
-#: ldlang.c:3295
+#: ldlang.c:3686
 msgid "%P%F: invalid syntax in flags\n"
 msgstr ""
 
-#: ldlang.c:3891
+#: ldlang.c:4281
 msgid "%P%Fmultiple STARTUP files\n"
 msgstr ""
 
-#: ldlang.c:4153
+#: ldlang.c:4553
 msgid "%F%P: bfd_record_phdr failed: %E\n"
 msgstr ""
 
-#: ldlang.c:4172
+#: ldlang.c:4572
 msgid "%X%P: section `%s' assigned to non-existent phdr `%s'\n"
 msgstr ""
 
-#: ldlang.c:4471
+#: ldlang.c:4881
 msgid "%X%P: unknown language `%s' in version information\n"
 msgstr ""
 
-#: ldlang.c:4520
+#: ldlang.c:4930
 msgid "%X%P: duplicate version tag `%s'\n"
 msgstr ""
 
-#: ldlang.c:4533 ldlang.c:4546
+#: ldlang.c:4943 ldlang.c:4956
 msgid "%X%P: duplicate expression `%s' in version information\n"
 msgstr ""
 
-#: ldlang.c:4583
+#: ldlang.c:4993
 msgid "%X%P: unable to find version dependency `%s'\n"
 msgstr ""
 
-#: ldlang.c:4605
+#: ldlang.c:5015
 msgid "%X%P: unable to read .exports section contents"
 msgstr ""
 
@@ -616,195 +669,195 @@ msgstr ""
 msgid "%X%P: can't set BFD default target to `%s': %E\n"
 msgstr ""
 
-#: ldmain.c:258
+#: ldmain.c:262
 msgid "%P%F: -r and --mpc860c0 may not be used together\n"
 msgstr ""
 
-#: ldmain.c:260
+#: ldmain.c:264
 msgid "%P%F: --relax and -r may not be used together\n"
 msgstr ""
 
-#: ldmain.c:262
+#: ldmain.c:266
 msgid "%P%F: -r and -shared may not be used together\n"
 msgstr ""
 
-#: ldmain.c:291
+#: ldmain.c:295
 msgid "using internal linker script:\n"
 msgstr ""
 
-#: ldmain.c:310
+#: ldmain.c:314
 msgid "%P%F: no input files\n"
 msgstr ""
 
-#: ldmain.c:315
+#: ldmain.c:319
 msgid "%P: mode %s\n"
 msgstr ""
 
-#: ldmain.c:333
+#: ldmain.c:337
 msgid "%P%F: cannot open map file %s: %E\n"
 msgstr ""
 
-#: ldmain.c:379
+#: ldmain.c:383
 msgid "%P: link errors found, deleting executable `%s'\n"
 msgstr ""
 
-#: ldmain.c:390
+#: ldmain.c:394
 msgid "%F%B: final close failed: %E\n"
 msgstr ""
 
-#: ldmain.c:414
+#: ldmain.c:418
 msgid "%X%P: unable to open for source of copy `%s'\n"
 msgstr ""
 
-#: ldmain.c:416
+#: ldmain.c:420
 msgid "%X%P: unable to open for destination of copy `%s'\n"
 msgstr ""
 
-#: ldmain.c:422
+#: ldmain.c:426
 msgid "%P: Error writing file `%s'\n"
 msgstr ""
 
-#: ldmain.c:428 pe-dll.c:981
+#: ldmain.c:432 pe-dll.c:1085
 #, c-format
 msgid "%P: Error closing file `%s'\n"
 msgstr ""
 
-#: ldmain.c:445
+#: ldmain.c:449
 #, c-format
 msgid "%s: total time in link: %ld.%06ld\n"
 msgstr ""
 
-#: ldmain.c:448
+#: ldmain.c:452
 #, c-format
 msgid "%s: data size %ld\n"
 msgstr ""
 
-#: ldmain.c:489
+#: ldmain.c:493
 msgid "%P%F: missing argument to -m\n"
 msgstr ""
 
-#: ldmain.c:603 ldmain.c:624 ldmain.c:655
+#: ldmain.c:607 ldmain.c:628 ldmain.c:659
 msgid "%P%F: bfd_hash_table_init failed: %E\n"
 msgstr ""
 
-#: ldmain.c:608 ldmain.c:627
+#: ldmain.c:612 ldmain.c:631
 msgid "%P%F: bfd_hash_lookup failed: %E\n"
 msgstr ""
 
-#: ldmain.c:642
+#: ldmain.c:646
 msgid "%X%P: error: duplicate retain-symbols-file\n"
 msgstr ""
 
-#: ldmain.c:686
+#: ldmain.c:690
 msgid "%P%F: bfd_hash_lookup for insertion failed: %E\n"
 msgstr ""
 
-#: ldmain.c:691
+#: ldmain.c:695
 msgid "%P: `-retain-symbols-file' overrides `-s' and `-S'\n"
 msgstr ""
 
-#: ldmain.c:768
+#: ldmain.c:772
 msgid "Archive member included"
 msgstr ""
 
-#: ldmain.c:769
+#: ldmain.c:773
 msgid "because of file (symbol)"
 msgstr ""
 
-#: ldmain.c:841
+#: ldmain.c:845
 msgid "%X%C: multiple definition of `%T'\n"
 msgstr ""
 
-#: ldmain.c:844
+#: ldmain.c:848
 msgid "%D: first defined here\n"
 msgstr ""
 
-#: ldmain.c:873
+#: ldmain.c:877
 msgid "%B: warning: definition of `%T' overriding common\n"
 msgstr ""
 
-#: ldmain.c:876
+#: ldmain.c:880
 msgid "%B: warning: common is here\n"
 msgstr ""
 
-#: ldmain.c:883
+#: ldmain.c:887
 msgid "%B: warning: common of `%T' overridden by definition\n"
 msgstr ""
 
-#: ldmain.c:886
+#: ldmain.c:890
 msgid "%B: warning: defined here\n"
 msgstr ""
 
-#: ldmain.c:893
+#: ldmain.c:897
 msgid "%B: warning: common of `%T' overridden by larger common\n"
 msgstr ""
 
-#: ldmain.c:896
+#: ldmain.c:900
 msgid "%B: warning: larger common is here\n"
 msgstr ""
 
-#: ldmain.c:900
+#: ldmain.c:904
 msgid "%B: warning: common of `%T' overriding smaller common\n"
 msgstr ""
 
-#: ldmain.c:903
+#: ldmain.c:907
 msgid "%B: warning: smaller common is here\n"
 msgstr ""
 
-#: ldmain.c:907
+#: ldmain.c:911
 msgid "%B: warning: multiple common of `%T'\n"
 msgstr ""
 
-#: ldmain.c:909
+#: ldmain.c:913
 msgid "%B: warning: previous common is here\n"
 msgstr ""
 
-#: ldmain.c:931 ldmain.c:970
+#: ldmain.c:935 ldmain.c:974
 msgid "%P: warning: global constructor %s used\n"
 msgstr ""
 
-#: ldmain.c:980
+#: ldmain.c:984
 msgid "%P%F: BFD backend error: BFD_RELOC_CTOR unsupported\n"
 msgstr ""
 
-#: ldmain.c:1166
+#: ldmain.c:1170
 msgid "%F%P: bfd_hash_table_init failed: %E\n"
 msgstr ""
 
-#: ldmain.c:1173
+#: ldmain.c:1177
 msgid "%F%P: bfd_hash_lookup failed: %E\n"
 msgstr ""
 
-#: ldmain.c:1192
+#: ldmain.c:1196
 msgid "%X%C: undefined reference to `%T'\n"
 msgstr ""
 
-#: ldmain.c:1195
+#: ldmain.c:1199
 msgid "%D: more undefined references to `%T' follow\n"
 msgstr ""
 
-#: ldmain.c:1201
+#: ldmain.c:1205
 msgid "%X%B: undefined reference to `%T'\n"
 msgstr ""
 
-#: ldmain.c:1204
+#: ldmain.c:1208
 msgid "%B: more undefined references to `%T' follow\n"
 msgstr ""
 
-#: ldmain.c:1225 ldmain.c:1247 ldmain.c:1267
+#: ldmain.c:1229 ldmain.c:1251 ldmain.c:1271
 msgid "%P%X: generated"
 msgstr ""
 
-#: ldmain.c:1228
+#: ldmain.c:1232
 msgid " relocation truncated to fit: %s %T"
 msgstr ""
 
-#: ldmain.c:1250
+#: ldmain.c:1254
 #, c-format
 msgid "dangerous relocation: %s\n"
 msgstr ""
 
-#: ldmain.c:1270
+#: ldmain.c:1274
 msgid " reloc refers to symbol `%T' which is not being output\n"
 msgstr ""
 
@@ -832,12 +885,24 @@ msgstr ""
 msgid "%F%P: internal error %s %d\n"
 msgstr ""
 
+#: ldmisc.c:550
+msgid "%P: internal error: aborting at %s line %d in %s\n"
+msgstr ""
+
+#: ldmisc.c:553
+msgid "%P: internal error: aborting at %s line %d\n"
+msgstr ""
+
+#: ldmisc.c:555
+msgid "%P%F: please report this bug\n"
+msgstr ""
+
 #: ldver.c:35
 #, c-format
 msgid "GNU ld version %s (with BFD %s)\n"
 msgstr ""
 
-#: ldver.c:42 lexsup.c:872
+#: ldver.c:42 lexsup.c:887
 msgid "  Supported emulations:\n"
 msgstr ""
 
@@ -854,572 +919,585 @@ msgstr ""
 msgid "%F%P: final link failed: %E\n"
 msgstr ""
 
-#: lexsup.c:152 lexsup.c:235 lexsup.c:241
+#: lexsup.c:155 lexsup.c:238 lexsup.c:244
 msgid "KEYWORD"
 msgstr ""
 
-#: lexsup.c:152
+#: lexsup.c:155
 msgid "Shared library control for HP/UX compatibility"
 msgstr ""
 
-#: lexsup.c:155
+#: lexsup.c:158
 msgid "ARCH"
 msgstr ""
 
-#: lexsup.c:155
+#: lexsup.c:158
 msgid "Set architecture"
 msgstr ""
 
-#: lexsup.c:157 lexsup.c:300
+#: lexsup.c:160 lexsup.c:307
 msgid "TARGET"
 msgstr ""
 
-#: lexsup.c:157
+#: lexsup.c:160
 msgid "Specify target for following input files"
 msgstr ""
 
-#: lexsup.c:159 lexsup.c:198 lexsup.c:208 lexsup.c:217 lexsup.c:284
-#: lexsup.c:307 lexsup.c:341
+#: lexsup.c:162 lexsup.c:201 lexsup.c:211 lexsup.c:220 lexsup.c:291
+#: lexsup.c:314 lexsup.c:348
 msgid "FILE"
 msgstr ""
 
-#: lexsup.c:159
+#: lexsup.c:162
 msgid "Read MRI format linker script"
 msgstr ""
 
-#: lexsup.c:161
+#: lexsup.c:164
 msgid "Force common symbols to be defined"
 msgstr ""
 
-#: lexsup.c:165 lexsup.c:331 lexsup.c:333 lexsup.c:335
+#: lexsup.c:168 lexsup.c:338 lexsup.c:340 lexsup.c:342
 msgid "ADDRESS"
 msgstr ""
 
-#: lexsup.c:165
+#: lexsup.c:168
 msgid "Set start address"
 msgstr ""
 
-#: lexsup.c:167
+#: lexsup.c:170
 msgid "Export all dynamic symbols"
 msgstr ""
 
-#: lexsup.c:169
+#: lexsup.c:172
 msgid "Link big-endian objects"
 msgstr ""
 
-#: lexsup.c:171
+#: lexsup.c:174
 msgid "Link little-endian objects"
 msgstr ""
 
-#: lexsup.c:173 lexsup.c:176
+#: lexsup.c:176 lexsup.c:179
 msgid "SHLIB"
 msgstr ""
 
-#: lexsup.c:173
+#: lexsup.c:176
 msgid "Auxiliary filter for shared object symbol table"
 msgstr ""
 
-#: lexsup.c:176
+#: lexsup.c:179
 msgid "Filter for shared object symbol table"
 msgstr ""
 
-#: lexsup.c:178
+#: lexsup.c:181
 msgid "Ignored"
 msgstr ""
 
-#: lexsup.c:180
+#: lexsup.c:183
 msgid "SIZE"
 msgstr ""
 
-#: lexsup.c:180
+#: lexsup.c:183
 msgid "Small data size (if no size, same as --shared)"
 msgstr ""
 
-#: lexsup.c:183
+#: lexsup.c:186
 msgid "FILENAME"
 msgstr ""
 
-#: lexsup.c:183
+#: lexsup.c:186
 msgid "Set internal name of shared library"
 msgstr ""
 
-#: lexsup.c:185
+#: lexsup.c:188
 msgid "LIBNAME"
 msgstr ""
 
-#: lexsup.c:185
+#: lexsup.c:188
 msgid "Search for library LIBNAME"
 msgstr ""
 
-#: lexsup.c:187
+#: lexsup.c:190
 msgid "DIRECTORY"
 msgstr ""
 
-#: lexsup.c:187
+#: lexsup.c:190
 msgid "Add DIRECTORY to library search path"
 msgstr ""
 
-#: lexsup.c:189
+#: lexsup.c:192
 msgid "EMULATION"
 msgstr ""
 
-#: lexsup.c:189
+#: lexsup.c:192
 msgid "Set emulation"
 msgstr ""
 
-#: lexsup.c:191
+#: lexsup.c:194
 msgid "Print map file on standard output"
 msgstr ""
 
-#: lexsup.c:193
+#: lexsup.c:196
 msgid "Do not page align data"
 msgstr ""
 
-#: lexsup.c:195
+#: lexsup.c:198
 msgid "Do not page align data, do not make text readonly"
 msgstr ""
 
-#: lexsup.c:198
+#: lexsup.c:201
 msgid "Set output file name"
 msgstr ""
 
-#: lexsup.c:200
+#: lexsup.c:203
 msgid "Optimize output file"
 msgstr ""
 
-#: lexsup.c:202
+#: lexsup.c:205
 msgid "Ignored for SVR4 compatibility"
 msgstr ""
 
-#: lexsup.c:204
+#: lexsup.c:207
 msgid "Generate relocateable output"
 msgstr ""
 
-#: lexsup.c:208
+#: lexsup.c:211
 msgid "Just link symbols (if directory, same as --rpath)"
 msgstr ""
 
-#: lexsup.c:211
+#: lexsup.c:214
 msgid "Strip all symbols"
 msgstr ""
 
-#: lexsup.c:213
+#: lexsup.c:216
 msgid "Strip debugging symbols"
 msgstr ""
 
-#: lexsup.c:215
+#: lexsup.c:218
 msgid "Trace file opens"
 msgstr ""
 
-#: lexsup.c:217
+#: lexsup.c:220
 msgid "Read linker script"
 msgstr ""
 
-#: lexsup.c:219 lexsup.c:231 lexsup.c:327 lexsup.c:344 lexsup.c:361
+#: lexsup.c:222 lexsup.c:234 lexsup.c:277 lexsup.c:289 lexsup.c:334
+#: lexsup.c:351 lexsup.c:368
 msgid "SYMBOL"
 msgstr ""
 
-#: lexsup.c:219
+#: lexsup.c:222
 msgid "Start with undefined reference to SYMBOL"
 msgstr ""
 
-#: lexsup.c:221
+#: lexsup.c:224
 msgid "Build global constructor/destructor tables"
 msgstr ""
 
-#: lexsup.c:223
+#: lexsup.c:226
 msgid "Print version information"
 msgstr ""
 
-#: lexsup.c:225
+#: lexsup.c:228
 msgid "Print version and emulation information"
 msgstr ""
 
-#: lexsup.c:227
+#: lexsup.c:230
 msgid "Discard all local symbols"
 msgstr ""
 
-#: lexsup.c:229
+#: lexsup.c:232
 msgid "Discard temporary local symbols"
 msgstr ""
 
-#: lexsup.c:231
+#: lexsup.c:234
 msgid "Trace mentions of SYMBOL"
 msgstr ""
 
-#: lexsup.c:233 lexsup.c:309 lexsup.c:311
+#: lexsup.c:236 lexsup.c:316 lexsup.c:318
 msgid "PATH"
 msgstr ""
 
-#: lexsup.c:233
+#: lexsup.c:236
 msgid "Default search path for Solaris compatibility"
 msgstr ""
 
-#: lexsup.c:235
+#: lexsup.c:238
 msgid "Ignored for Solaris compatibility"
 msgstr ""
 
-#: lexsup.c:237
+#: lexsup.c:240
 msgid "Start a group"
 msgstr ""
 
-#: lexsup.c:239
+#: lexsup.c:242
 msgid "End a group"
 msgstr ""
 
-#: lexsup.c:241
+#: lexsup.c:244
 msgid "Ignored for SunOS compatibility"
 msgstr ""
 
-#: lexsup.c:243
+#: lexsup.c:246
 msgid "Link against shared libraries"
 msgstr ""
 
-#: lexsup.c:249
+#: lexsup.c:252
 msgid "Do not link against shared libraries"
 msgstr ""
 
-#: lexsup.c:257
+#: lexsup.c:260
 msgid "Bind global references locally"
 msgstr ""
 
-#: lexsup.c:259
+#: lexsup.c:262
 msgid "Check section addresses for overlaps (default)"
 msgstr ""
 
-#: lexsup.c:261
+#: lexsup.c:264
 msgid "Do not check section addresses for overlaps"
 msgstr ""
 
-#: lexsup.c:264
+#: lexsup.c:267
 msgid "Output cross reference table"
 msgstr ""
 
-#: lexsup.c:266
+#: lexsup.c:269
 msgid "SYMBOL=EXPRESSION"
 msgstr ""
 
-#: lexsup.c:266
+#: lexsup.c:269
 msgid "Define a symbol"
 msgstr ""
 
-#: lexsup.c:268
+#: lexsup.c:271
 msgid "Demangle symbol names"
 msgstr ""
 
-#: lexsup.c:270
+#: lexsup.c:273
 msgid "PROGRAM"
 msgstr ""
 
-#: lexsup.c:270
+#: lexsup.c:273
 msgid "Set the dynamic linker to use"
 msgstr ""
 
-#: lexsup.c:272
+#: lexsup.c:275
 msgid "Generate embedded relocs"
 msgstr ""
 
-#: lexsup.c:274
+#: lexsup.c:277
+msgid "Call SYMBOL at unload-time"
+msgstr ""
+
+#: lexsup.c:279
 msgid "Force generation of file with .exe suffix"
 msgstr ""
 
-#: lexsup.c:276
+#: lexsup.c:281
 msgid "Remove unused sections (on some targets)"
 msgstr ""
 
-#: lexsup.c:279
+#: lexsup.c:284
 msgid "Don't remove unused sections (default)"
 msgstr ""
 
-#: lexsup.c:282
+#: lexsup.c:287
 msgid "Print option help"
 msgstr ""
 
-#: lexsup.c:284
+#: lexsup.c:289
+msgid "Call SYMBOL at load-time"
+msgstr ""
+
+#: lexsup.c:291
 msgid "Write a map file"
 msgstr ""
 
-#: lexsup.c:286
+#: lexsup.c:293
 msgid "Do not demangle symbol names"
 msgstr ""
 
-#: lexsup.c:288
+#: lexsup.c:295
 msgid "Use less memory and more disk I/O"
 msgstr ""
 
-#: lexsup.c:290
+#: lexsup.c:297
 msgid "Allow no undefined symbols"
 msgstr ""
 
-#: lexsup.c:292
+#: lexsup.c:299
 msgid "Don't warn about mismatched input files"
 msgstr ""
 
-#: lexsup.c:294
+#: lexsup.c:301
 msgid "Turn off --whole-archive"
 msgstr ""
 
-#: lexsup.c:296
+#: lexsup.c:303
 msgid "Create an output file even if errors occur"
 msgstr ""
 
-#: lexsup.c:300
+#: lexsup.c:307
 msgid "Specify target of output file"
 msgstr ""
 
-#: lexsup.c:302
+#: lexsup.c:309
 msgid "Ignored for Linux compatibility"
 msgstr ""
 
-#: lexsup.c:304
+#: lexsup.c:311
 msgid "Relax branches on certain targets"
 msgstr ""
 
-#: lexsup.c:307
+#: lexsup.c:314
 msgid "Keep only symbols listed in FILE"
 msgstr ""
 
-#: lexsup.c:309
+#: lexsup.c:316
 msgid "Set runtime shared library search path"
 msgstr ""
 
-#: lexsup.c:311
+#: lexsup.c:318
 msgid "Set link time shared library search path"
 msgstr ""
 
-#: lexsup.c:313
+#: lexsup.c:320
 msgid "Create a shared library"
 msgstr ""
 
-#: lexsup.c:317
+#: lexsup.c:324
 msgid "Sort common symbols by size"
 msgstr ""
 
-#: lexsup.c:321
+#: lexsup.c:328
 msgid "Split output sections for each file"
 msgstr ""
 
-#: lexsup.c:323
+#: lexsup.c:330
 msgid "COUNT"
 msgstr ""
 
-#: lexsup.c:323
+#: lexsup.c:330
 msgid "Split output sections every COUNT relocs"
 msgstr ""
 
-#: lexsup.c:325
+#: lexsup.c:332
 msgid "Print memory usage statistics"
 msgstr ""
 
-#: lexsup.c:327
+#: lexsup.c:334
 msgid "Do task level linking"
 msgstr ""
 
-#: lexsup.c:329
+#: lexsup.c:336
 msgid "Use same format as native linker"
 msgstr ""
 
-#: lexsup.c:331
+#: lexsup.c:338
 msgid "Set address of .bss section"
 msgstr ""
 
-#: lexsup.c:333
+#: lexsup.c:340
 msgid "Set address of .data section"
 msgstr ""
 
-#: lexsup.c:335
+#: lexsup.c:342
 msgid "Set address of .text section"
 msgstr ""
 
-#: lexsup.c:337
+#: lexsup.c:344
 msgid "Output lots of information during link"
 msgstr ""
 
-#: lexsup.c:341
+#: lexsup.c:348
 msgid "Read version information script"
 msgstr ""
 
-#: lexsup.c:344
+#: lexsup.c:351
 msgid ""
 "Take export symbols list from .exports, using\n"
 "\t\t\t\tSYMBOL as the version."
 msgstr ""
 
-#: lexsup.c:347
+#: lexsup.c:354
 msgid "Warn about duplicate common symbols"
 msgstr ""
 
-#: lexsup.c:349
+#: lexsup.c:356
 msgid "Warn if global constructors/destructors are seen"
 msgstr ""
 
-#: lexsup.c:352
+#: lexsup.c:359
 msgid "Warn if the multiple GP values are used"
 msgstr ""
 
-#: lexsup.c:354
+#: lexsup.c:361
 msgid "Warn only once per undefined symbol"
 msgstr ""
 
-#: lexsup.c:356
+#: lexsup.c:363
 msgid "Warn if start of section changes due to alignment"
 msgstr ""
 
-#: lexsup.c:359
+#: lexsup.c:366
 msgid "Include all objects from following archives"
 msgstr ""
 
-#: lexsup.c:361
+#: lexsup.c:368
 msgid "Use wrapper functions for SYMBOL"
 msgstr ""
 
-#: lexsup.c:363
+#: lexsup.c:370
 msgid "[=WORDS]"
 msgstr ""
 
-#: lexsup.c:363
+#: lexsup.c:370
 msgid ""
 "Modify problematic branches in last WORDS (1-10,\n"
 "\t\t\t\tdefault 5) words of a page"
 msgstr ""
 
-#: lexsup.c:525
+#: lexsup.c:520
+#, c-format
+msgid "%s: use the --help option for usage information\n"
+msgstr ""
+
+#: lexsup.c:540
 msgid "%P%F: unrecognized -a option `%s'\n"
 msgstr ""
 
-#: lexsup.c:538
+#: lexsup.c:553
 msgid "%P%F: unrecognized -assert option `%s'\n"
 msgstr ""
 
-#: lexsup.c:629
+#: lexsup.c:644
 msgid "%P%F: invalid number `%s'\n"
 msgstr ""
 
-#: lexsup.c:801
+#: lexsup.c:816
 msgid "%P%F: -shared not supported\n"
 msgstr ""
 
-#: lexsup.c:865
+#: lexsup.c:880
 msgid "Copyright 1997 Free Software Foundation, Inc.\n"
 msgstr ""
 
-#: lexsup.c:866
+#: lexsup.c:881
 msgid ""
 "This program is free software; you may redistribute it under the terms of\n"
 "the GNU General Public License.  This program has absolutely no warranty.\n"
 msgstr ""
 
-#: lexsup.c:957
+#: lexsup.c:972
 #, c-format
 msgid "%s: may not nest groups (--help for usage)\n"
 msgstr ""
 
-#: lexsup.c:968
+#: lexsup.c:983
 #, c-format
 msgid "%s: group ended before it began (--help for usage)\n"
 msgstr ""
 
-#: lexsup.c:984
-msgid "Invalid argument to option \"mpc860c0\"\n"
+#: lexsup.c:1000
+#, c-format
+msgid "%s: Invalid argument to option \"mpc860c0\"\n"
 msgstr ""
 
-#: lexsup.c:1031
+#: lexsup.c:1056
 msgid "%P%F: invalid hex number `%s'\n"
 msgstr ""
 
-#: lexsup.c:1043
+#: lexsup.c:1068
 #, c-format
 msgid "Usage: %s [options] file...\n"
 msgstr ""
 
-#: lexsup.c:1045
+#: lexsup.c:1070
 msgid "Options:\n"
 msgstr ""
 
-#: lexsup.c:1122
+#. Note: Various tools (such as libtool) depend upon the
+#. format of the listings below - do not change them.
+#: lexsup.c:1149
 #, c-format
-msgid ""
-"%s: supported targets:\n"
-"  "
+msgid "%s: supported targets:"
 msgstr ""
 
-#: lexsup.c:1130
+#: lexsup.c:1157
 #, c-format
-msgid ""
-"%s: supported emulations:\n"
-"  "
+msgid "%s: supported emulations: "
 msgstr ""
 
-#: lexsup.c:1135
+#: lexsup.c:1162
 #, c-format
 msgid "%s: emulation specific options:\n"
 msgstr ""
 
-#: lexsup.c:1139
+#: lexsup.c:1166
 msgid ""
 "\n"
 "Report bugs to bug-gnu-utils@gnu.org\n"
 msgstr ""
 
-#: mri.c:342
+#: mri.c:343
 msgid "%P%F: unknown format type %s\n"
 msgstr ""
 
-#: pe-dll.c:114
+#: pe-dll.c:144
 #, c-format
 msgid "%XUnsupported PEI architecture: %s\n"
 msgstr ""
 
-#: pe-dll.c:346
+#: pe-dll.c:377
 #, c-format
 msgid "%XError, duplicate EXPORT with oridinals: %s (%d vs %d)\n"
 msgstr ""
 
-#: pe-dll.c:352
+#: pe-dll.c:384
 #, c-format
 msgid "Warning, duplicate EXPORT: %s\n"
 msgstr ""
 
-#: pe-dll.c:405
+#: pe-dll.c:446
 #, c-format
 msgid "%XCannot export %s: symbol not defined\n"
 msgstr ""
 
-#: pe-dll.c:411
+#: pe-dll.c:452
 #, c-format
 msgid "%XCannot export %s: symbol wrong type (%d vs %d)\n"
 msgstr ""
 
-#: pe-dll.c:418
+#: pe-dll.c:459
 #, c-format
 msgid "%XCannot export %s: symbol not found\n"
 msgstr ""
 
-#: pe-dll.c:543
+#: pe-dll.c:584
 #, c-format
 msgid "%XError, oridinal used twice: %d (%s vs %s)\n"
 msgstr ""
 
-#: pe-dll.c:735
+#: pe-dll.c:834
 #, c-format
 msgid "%XError: %d-bit reloc in dll\n"
 msgstr ""
 
-#: pe-dll.c:854
+#: pe-dll.c:958
 #, c-format
 msgid "%s: Can't open output def file %s\n"
 msgstr ""
 
-#: pe-dll.c:976
+#: pe-dll.c:1080
 msgid "; no contents available\n"
 msgstr ""
 
-#: pe-dll.c:1428
+#: pe-dll.c:1569
 #, c-format
 msgid "%XCan't open .lib file: %s\n"
 msgstr ""
 
-#: pe-dll.c:1433
+#: pe-dll.c:1574
 #, c-format
 msgid "Creating library file: %s\n"
 msgstr ""
diff --git a/opcodes/Makefile.in b/opcodes/Makefile.in
index 277f503..23d4178 100644
--- a/opcodes/Makefile.in
+++ b/opcodes/Makefile.in
@@ -84,21 +84,19 @@ INSTOBJEXT = @INSTOBJEXT@
 INTLDEPS = @INTLDEPS@
 INTLLIBS = @INTLLIBS@
 INTLOBJS = @INTLOBJS@
-LD = @LD@
 LIBTOOL = @LIBTOOL@
 LN_S = @LN_S@
 MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
 MKINSTALLDIRS = @MKINSTALLDIRS@
 MSGFMT = @MSGFMT@
-NM = @NM@
+OBJDUMP = @OBJDUMP@
 PACKAGE = @PACKAGE@
 POFILES = @POFILES@
 POSUB = @POSUB@
 RANLIB = @RANLIB@
 USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
 USE_NLS = @USE_NLS@
-USE_SYMBOL_UNDERSCORE = @USE_SYMBOL_UNDERSCORE@
 VERSION = @VERSION@
 WIN32LDFLAGS = @WIN32LDFLAGS@
 WIN32LIBADD = @WIN32LIBADD@
diff --git a/opcodes/aclocal.m4 b/opcodes/aclocal.m4
index 308711d..7ba1f4e 100644
--- a/opcodes/aclocal.m4
+++ b/opcodes/aclocal.m4
@@ -105,7 +105,7 @@ fi
 AC_SUBST($1)])
 
 
-# serial 35 AC_PROG_LIBTOOL
+# serial 40 AC_PROG_LIBTOOL
 AC_DEFUN(AC_PROG_LIBTOOL,
 [AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
 
@@ -114,10 +114,11 @@ AC_CACHE_SAVE
 
 # Actually configure libtool.  ac_aux_dir is where install-sh is found.
 CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
-DLLTOOL="$DLLTOOL" AS="$AS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
 ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
 || AC_MSG_ERROR([libtool configure failed])
 
 # Reload cache, that may have been modified by ltconfig
@@ -146,24 +147,33 @@ AC_REQUIRE([AC_PROG_RANLIB])dnl
 AC_REQUIRE([AC_PROG_CC])dnl
 AC_REQUIRE([AC_PROG_LD])dnl
 AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_SYS_NM_PARSE])dnl
-AC_REQUIRE([AC_SYS_SYMBOL_UNDERSCORE])dnl
 AC_REQUIRE([AC_PROG_LN_S])dnl
 dnl
 
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
+
 # Check for any special flags to pass to ltconfig.
 libtool_flags="--cache-file=$cache_file"
 test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
 test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
 test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
 test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
 test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
+[libtool_flags="$libtool_flags --enable-dlopen"])
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[libtool_flags="$libtool_flags --enable-win32-dll"])
+AC_ARG_ENABLE(libtool-lock,
+  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
 
 # Some flags need to be propagated to the compiler or linker for good
 # libtool support.
-case "$host" in
+case "$lt_target" in
 *-*-irix6*)
   # Find out which ABI we are using.
   echo '[#]line __oline__ "configure"' > conftest.$ac_ext
@@ -195,33 +205,28 @@ case "$host" in
   fi
   ;;
 
-*-*-cygwin*)
-  AC_SYS_LIBTOOL_CYGWIN
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw*)
+  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+  AC_CHECK_TOOL(AS, as, false)
+  AC_CHECK_TOOL(OBJDUMP, objdump, false)
   ;;
-
+])
 esac
-
-# enable the --disable-libtool-lock switch
-
-AC_ARG_ENABLE(libtool-lock,
-[  --disable-libtool-lock  force libtool not to do file locking],
-need_locks=$enableval,
-need_locks=yes)
-
-if test x"$need_locks" = xno; then
-  libtool_flags="$libtool_flags --disable-lock"
-fi
 ])
 
-# AC_LIBTOOL_DLOPEN - check for dlopen support
-AC_DEFUN(AC_LIBTOOL_DLOPEN, [lt_dlopen=yes])
+# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
+AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
+
+# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
+AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
 
 # AC_ENABLE_SHARED - implement the --enable-shared flag
 # Usage: AC_ENABLE_SHARED[(DEFAULT)]
 #   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
 #   `yes'.
-AC_DEFUN(AC_ENABLE_SHARED,
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_SHARED, [dnl
+define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
 AC_ARG_ENABLE(shared,
 changequote(<<, >>)dnl
 <<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
@@ -246,15 +251,15 @@ enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
 ])
 
 # AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN(AC_DISABLE_SHARED,
-[AC_ENABLE_SHARED(no)])
+AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)])
 
 # AC_ENABLE_STATIC - implement the --enable-static flag
 # Usage: AC_ENABLE_STATIC[(DEFAULT)]
 #   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
 #   `yes'.
-AC_DEFUN(AC_ENABLE_STATIC,
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_STATIC, [dnl
+define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
 AC_ARG_ENABLE(static,
 changequote(<<, >>)dnl
 <<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
@@ -279,16 +284,16 @@ enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
 ])
 
 # AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN(AC_DISABLE_STATIC,
-[AC_ENABLE_STATIC(no)])
+AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)])
 
 
 # AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
 # Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
 #   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
 #   `yes'.
-AC_DEFUN(AC_ENABLE_FAST_INSTALL,
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
+define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
 AC_ARG_ENABLE(fast-install,
 changequote(<<, >>)dnl
 <<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
@@ -313,9 +318,8 @@ enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
 ])
 
 # AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN(AC_DISABLE_FAST_INSTALL,
-[AC_ENABLE_FAST_INSTALL(no)])
-
+AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)])
 
 # AC_PROG_LD - find the path to the GNU or non-GNU linker
 AC_DEFUN(AC_PROG_LD,
@@ -333,7 +337,7 @@ if test "$ac_cv_prog_gcc" = yes; then
   case "$ac_prog" in
     # Accept absolute paths.
 changequote(,)dnl
-    /* | [A-Za-z]:[\\/]*)
+    [\\/]* | [A-Za-z]:[\\/]*)
       re_direlt='/[^/][^/]*/\.\./'
 changequote([,])dnl
       # Canonicalize the path of ld
@@ -359,10 +363,10 @@ else
 fi
 AC_CACHE_VAL(ac_cv_path_LD,
 [if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
   for ac_dir in $PATH; do
     test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog"; then
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
       ac_cv_path_LD="$ac_dir/$ac_prog"
       # Check to see if the program is GNU ld.  I'd rather use --version,
       # but apparently some GNU ld's only accept -v.
@@ -385,7 +389,6 @@ else
   AC_MSG_RESULT(no)
 fi
 test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_SUBST(LD)
 AC_PROG_LD_GNU
 ])
 
@@ -407,10 +410,10 @@ AC_CACHE_VAL(ac_cv_path_NM,
   # Let the user override the test.
   ac_cv_path_NM="$NM"
 else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
   for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
     test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/nm; then
+    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
       # Check to see if the nm accepts a BSD-compat flag.
       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
       #   nm: unknown option "B" ignored
@@ -431,230 +434,24 @@ else
 fi])
 NM="$ac_cv_path_NM"
 AC_MSG_RESULT([$NM])
-AC_SUBST(NM)
 ])
 
-# AC_SYS_NM_PARSE - Check for command to grab the raw symbol name followed
-# by C symbol name from nm.
-AC_DEFUN(AC_SYS_NM_PARSE,
+# AC_CHECK_LIBM - check for math library
+AC_DEFUN(AC_CHECK_LIBM,
 [AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output])
-AC_CACHE_VAL(ac_cv_sys_global_symbol_pipe,
-[# These are sane defaults that work on at least a few old systems.
-# {They come from Ultrix.  What could be older than Ultrix?!! ;)}
-
-changequote(,)dnl
-# Character class describing NM global symbol codes.
-ac_symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-ac_symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-# Define system-specific variables.
-case "$host_os" in
-aix*)
-  ac_symcode='[BCDT]'
-  ;;
-cygwin* | mingw*)
-  ac_symcode='[ABCDGISTW]'
-  ;;
-hpux*)
-  ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
+LIBM=
+case "$lt_target" in
+*-*-beos* | *-*-cygwin*)
+  # These system don't have libm
   ;;
-irix*)
-  ac_symcode='[BCDEGRST]'
+*-ncr-sysv4.3*)
+  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
   ;;
-solaris*)
-  ac_symcode='[BDT]'
+*)
+  AC_CHECK_LIB(m, main, LIBM="-lm")
   ;;
 esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
-  ac_symcode='[ABCDGISTW]'
-fi
-changequote([,])dnl
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
-  ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ 	]\($ac_symcode\)[ 	][ 	]*\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'"
-
-  # Check to see that the pipe works correctly.
-  ac_pipe_works=no
-  rm -f conftest.$ac_ext
-  cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func;return 0;}
-EOF
-
-  if AC_TRY_EVAL(ac_compile); then
-    # Now try to grab the symbols.
-    ac_nlist=conftest.nm
-  
-    if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
-
-      # Try sorting and uniquifying the output.
-      if sort "$ac_nlist" | uniq > "$ac_nlist"T; then
-	mv -f "$ac_nlist"T "$ac_nlist"
-      else
-	rm -f "$ac_nlist"T
-      fi
-
-      # Make sure that we snagged all the symbols we need.
-      if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then
-	if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then
-	  cat <<EOF > conftest.c
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
-	  # Now generate the symbol file.
-	  eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c'
-
-	  cat <<EOF >> conftest.c
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
-  const char *name;
-  lt_ptr_t address;
-}
-changequote(,)dnl
-lt_preloaded_symbols[] =
-changequote([,])dnl
-{
-EOF
-	sed 's/^. \(.*\) \(.*\)$/  {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c
-	cat <<\EOF >> conftest.c
-  {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
-	  # Now try linking the two files.
-	  mv conftest.$ac_objext conftestm.$ac_objext
-	  ac_save_LIBS="$LIBS"
-	  ac_save_CFLAGS="$CFLAGS"
-	  LIBS="conftestm.$ac_objext"
-	  CFLAGS="$CFLAGS$no_builtin_flag"
-	  if AC_TRY_EVAL(ac_link) && test -s conftest; then
-	    ac_pipe_works=yes
-	  else
-	    echo "configure: failed program was:" >&AC_FD_CC
-	    cat conftest.c >&AC_FD_CC
-	  fi
-	  LIBS="$ac_save_LIBS"
-	  CFLAGS="$ac_save_CFLAGS"
-	else
-	  echo "cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
-	fi
-      else
-	echo "cannot find nm_test_var in $ac_nlist" >&AC_FD_CC
-      fi
-    else
-      echo "cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
-    fi
-  else
-    echo "$progname: failed program was:" >&AC_FD_CC
-    cat conftest.c >&AC_FD_CC
-  fi
-  rm -rf conftest*
-
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$ac_pipe_works" = yes; then
-    if test x"$ac_symprfx" = x"_"; then
-      ac_cv_sys_symbol_underscore=yes
-    else
-      ac_cv_sys_symbol_underscore=no
-    fi
-    break
-  else
-    ac_cv_sys_global_symbol_pipe=
-  fi
-done
-])
-
-ac_result=yes
-if test -z "$ac_cv_sys_global_symbol_pipe"; then
-   ac_result=no
-fi
-AC_MSG_RESULT($ac_result)
-])
-
-# AC_SYS_LIBTOOL_CYGWIN - find tools needed on cygwin
-AC_DEFUN(AC_SYS_LIBTOOL_CYGWIN,
-[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-AC_CHECK_TOOL(AS, as, false)
-])
-
-# AC_SYS_SYMBOL_UNDERSCORE - does the compiler prefix global symbols
-#                            with an underscore?
-AC_DEFUN(AC_SYS_SYMBOL_UNDERSCORE,
-[AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_SYS_NM_PARSE])dnl
-AC_MSG_CHECKING([for _ prefix in compiled symbols])
-AC_CACHE_VAL(ac_cv_sys_symbol_underscore,
-[ac_cv_sys_symbol_underscore=no
-cat > conftest.$ac_ext <<EOF
-void nm_test_func(){}
-int main(){nm_test_func;return 0;}
-EOF
-if AC_TRY_EVAL(ac_compile); then
-  # Now try to grab the symbols.
-  ac_nlist=conftest.nm
-  if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
-    # See whether the symbols have a leading underscore.
-    if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
-      ac_cv_sys_symbol_underscore=yes
-    else
-      if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
-	:
-      else
-	echo "configure: cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
-      fi
-    fi
-  else
-    echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
-  fi
-else
-  echo "configure: failed program was:" >&AC_FD_CC
-  cat conftest.c >&AC_FD_CC
-fi
-rm -rf conftest*
-])
-AC_MSG_RESULT($ac_cv_sys_symbol_underscore)
-USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no}
-AC_SUBST(USE_SYMBOL_UNDERSCORE)dnl
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN(AC_CHECK_LIBM, [
-AC_CHECK_LIB(mw, _mwvalidcheckl)
-AC_CHECK_LIB(m, cos)
 ])
 
 # AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
@@ -665,13 +462,14 @@ AC_CHECK_LIB(m, cos)
 # '${top_builddir}/' (note the single quotes!) if your package is not
 # flat, and, if you're not using automake, define top_builddir as
 # appropriate in the Makefiles.
-AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [
+AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
   case "$enable_ltdl_convenience" in
   no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
   "") enable_ltdl_convenience=yes
       ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
   esac
   LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
+  INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
 ])
 
 # AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
@@ -683,16 +481,23 @@ AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [
 # flat, and, if you're not using automake, define top_builddir as
 # appropriate in the Makefiles.
 # In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [
-  AC_CHECK_LIB(ltdl, main, LIBLTDL="-lltdl", [
-    case "$enable_ltdl_install" in
-    no) AC_MSG_WARN([libltdl not installed, but installation disabled]) ;;
-    "") enable_ltdl_install=yes
-        ac_configure_args="$ac_configure_args --enable-ltdl-install" ;;
-    esac
+AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+  AC_CHECK_LIB(ltdl, main,
+  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+  [if test x"$enable_ltdl_install" = xno; then
+     AC_MSG_WARN([libltdl not installed, but installation disabled])
+   else
+     enable_ltdl_install=yes
+   fi
   ])
-  if test x"$enable_ltdl_install" != x"no"; then
+  if test x"$enable_ltdl_install" = x"yes"; then
+    ac_configure_args="$ac_configure_args --enable-ltdl-install"
     LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
+    INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
+  else
+    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+    LIBLTDL="-lltdl"
+    INCLTDL=
   fi
 ])
 
@@ -704,9 +509,9 @@ AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
 AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
 AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
 AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
-AC_DEFUN(AM_SYS_NM_PARSE, [indir([AC_SYS_NM_PARSE])])dnl
-AC_DEFUN(AM_SYS_SYMBOL_UNDERSCORE, [indir([AC_SYS_SYMBOL_UNDERSCORE])])dnl
-AC_DEFUN(AM_SYS_LIBTOOL_CYGWIN, [indir([AC_SYS_LIBTOOL_CYGWIN])])dnl
+
+dnl This is just to silence aclocal about the macro not being used
+ifelse([AC_DISABLE_FAST_INSTALL])dnl
 
 # Like AC_CONFIG_HEADER, but automatically create stamp file.
 
diff --git a/opcodes/configure b/opcodes/configure
index 34e79f0..ec964f1 100755
--- a/opcodes/configure
+++ b/opcodes/configure
@@ -1,7 +1,7 @@
 #! /bin/sh
 
 # Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13.1 
+# Generated automatically using autoconf version 2.13 
 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
 #
 # This configure script is free software; the Free Software Foundation
@@ -20,7 +20,7 @@ ac_help="$ac_help
 ac_help="$ac_help
   --with-gnu-ld           assume the C compiler uses GNU ld [default=no]"
 ac_help="$ac_help
-  --disable-libtool-lock  force libtool not to do file locking"
+  --disable-libtool-lock  avoid locking (might break parallel builds)"
 ac_help="$ac_help
   --enable-targets        alternative target configurations"
 ac_help="$ac_help
@@ -49,6 +49,7 @@ program_suffix=NONE
 program_transform_name=s,x,x,
 silent=
 site=
+sitefile=
 srcdir=
 target=NONE
 verbose=
@@ -163,6 +164,7 @@ Configuration:
   --help                  print this message
   --no-create             do not create output files
   --quiet, --silent       do not print \`checking...' messages
+  --site-file=FILE        use FILE as the site file
   --version               print the version of autoconf that created configure
 Directory and file names:
   --prefix=PREFIX         install architecture-independent files in PREFIX
@@ -333,6 +335,11 @@ EOF
   -site=* | --site=* | --sit=*)
     site="$ac_optarg" ;;
 
+  -site-file | --site-file | --site-fil | --site-fi | --site-f)
+    ac_prev=sitefile ;;
+  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
+    sitefile="$ac_optarg" ;;
+
   -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
     ac_prev=srcdir ;;
   -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
@@ -354,7 +361,7 @@ EOF
     verbose=yes ;;
 
   -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13.1"
+    echo "configure generated by autoconf version 2.13"
     exit 0 ;;
 
   -with-* | --with-*)
@@ -498,12 +505,16 @@ fi
 srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
 
 # Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
-  if test "x$prefix" != xNONE; then
-    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-  else
-    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+if test -z "$sitefile"; then
+  if test -z "$CONFIG_SITE"; then
+    if test "x$prefix" != xNONE; then
+      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+    else
+      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+    fi
   fi
+else
+  CONFIG_SITE="$sitefile"
 fi
 for ac_site_file in $CONFIG_SITE; do
   if test -r "$ac_site_file"; then
@@ -514,7 +525,7 @@ done
 
 if test -r "$cache_file"; then
   echo "loading cache $cache_file"
-      test -f "$cache_file" && . $cache_file
+  . $cache_file
 else
   echo "creating cache $cache_file"
   > $cache_file
@@ -558,130 +569,9 @@ done
 if test -z "$ac_aux_dir"; then
   { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
 fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:568: checking host system type" >&5
-if test "x$ac_cv_host" = "x" || (test "x$host" != "xNONE" && test "x$host" != "x$ac_cv_host_alias"); then
-
-# Make sure we can run config.sub.
-  if $ac_config_sub sun4 >/dev/null 2>&1; then :
-    else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-  fi
-
-  ac_cv_host_alias=$host
-  case "$ac_cv_host_alias" in
-  NONE)
-    case $nonopt in
-    NONE)
-      if ac_cv_host_alias=`$ac_config_guess`; then :
-      else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-      fi ;;
-    *) ac_cv_host_alias=$nonopt ;;
-    esac ;;
-  esac
-
-  ac_cv_host=`$ac_config_sub $ac_cv_host_alias`
-  ac_cv_host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-  ac_cv_host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-  ac_cv_host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-else
-  echo $ac_n "(cached) $ac_c" 1>&6
-fi
-
-echo "$ac_t""$ac_cv_host" 1>&6
-
-host=$ac_cv_host
-host_alias=$ac_cv_host_alias
-host_cpu=$ac_cv_host_cpu
-host_vendor=$ac_cv_host_vendor
-host_os=$ac_cv_host_os
-
-
-
-
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:609: checking target system type" >&5
-if test "x$ac_cv_target" = "x" || (test "x$target" != "xNONE" && test "x$target" != "x$ac_cv_target_alias"); then
-
-# Make sure we can run config.sub.
-  if $ac_config_sub sun4 >/dev/null 2>&1; then :
-    else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-  fi
-
-  ac_cv_target_alias=$target
-  case "$ac_cv_target_alias" in
-  NONE)
-    case $nonopt in
-    NONE)
-      ac_cv_target_alias=$host_alias ;;
-
-    *) ac_cv_target_alias=$nonopt ;;
-    esac ;;
-  esac
-
-  ac_cv_target=`$ac_config_sub $ac_cv_target_alias`
-  ac_cv_target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-  ac_cv_target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-  ac_cv_target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-else
-  echo $ac_n "(cached) $ac_c" 1>&6
-fi
-
-echo "$ac_t""$ac_cv_target" 1>&6
-
-target=$ac_cv_target
-target_alias=$ac_cv_target_alias
-target_cpu=$ac_cv_target_cpu
-target_vendor=$ac_cv_target_vendor
-target_os=$ac_cv_target_os
-
-
-
-
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:649: checking build system type" >&5
-if test "x$ac_cv_build" = "x" || (test "x$build" != "xNONE" && test "x$build" != "x$ac_cv_build_alias"); then
-
-# Make sure we can run config.sub.
-  if $ac_config_sub sun4 >/dev/null 2>&1; then :
-    else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-  fi
-
-  ac_cv_build_alias=$build
-  case "$ac_cv_build_alias" in
-  NONE)
-    case $nonopt in
-    NONE)
-      ac_cv_build_alias=$host_alias ;;
-
-    *) ac_cv_build_alias=$nonopt ;;
-    esac ;;
-  esac
-
-  ac_cv_build=`$ac_config_sub $ac_cv_build_alias`
-  ac_cv_build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-  ac_cv_build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-  ac_cv_build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-else
-  echo $ac_n "(cached) $ac_c" 1>&6
-fi
-
-echo "$ac_t""$ac_cv_build" 1>&6
-
-build=$ac_cv_build
-build_alias=$ac_cv_build_alias
-build_cpu=$ac_cv_build_cpu
-build_vendor=$ac_cv_build_vendor
-build_os=$ac_cv_build_os
-
-
-
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
 
 
 # Do some error checking and defaulting for the host and target type.
@@ -704,6 +594,69 @@ NONE---*---* | *---NONE---* | *---*---NONE) ;;
 *) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
 esac
 
+
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:605: checking host system type" >&5
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+  case $nonopt in
+  NONE)
+    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+    fi ;;
+  *) host_alias=$nonopt ;;
+  esac ;;
+esac
+
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:626: checking target system type" >&5
+
+target_alias=$target
+case "$target_alias" in
+NONE)
+  case $nonopt in
+  NONE) target_alias=$host_alias ;;
+  *) target_alias=$nonopt ;;
+  esac ;;
+esac
+
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:644: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+  case $nonopt in
+  NONE) build_alias=$host_alias ;;
+  *) build_alias=$nonopt ;;
+  esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
 test "$host_alias" != "$target_alias" &&
   test "$program_prefix$program_suffix$program_transform_name" = \
     NONENONEs,x,x, &&
@@ -712,8 +665,8 @@ test "$host_alias" != "$target_alias" &&
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:716: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:669: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
@@ -742,8 +695,8 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:746: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:699: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
@@ -789,12 +742,12 @@ fi
 
   if test -z "$CC"; then
     case "`uname -s`" in
-    *win32* | *WIN32* | *CYGWIN*)
+    *win32* | *WIN32*)
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:797: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:750: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
@@ -824,8 +777,8 @@ fi
   test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
 fi
 
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:829: checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) works" >&5
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:782: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -836,12 +789,12 @@ cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 840 "configure"
+#line 793 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:845: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:798: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -866,14 +819,14 @@ echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
 if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:871: checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:824: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:876: checking whether we are using GNU C" >&5
-if eval "test \"\${ac_cv_prog_gcc+set}\" = set"; then
+echo "configure:829: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.c <<EOF
@@ -881,7 +834,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:885: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:838: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -900,8 +853,8 @@ ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:904: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"\${ac_cv_prog_cc_g+set}\" = set"; then
+echo "configure:857: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   echo 'void f(){}' > conftest.c
@@ -932,7 +885,7 @@ else
 fi
 
 echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
-echo "configure:936: checking for POSIXized ISC" >&5
+echo "configure:889: checking for POSIXized ISC" >&5
 if test -d /etc/conf/kconfig.d &&
   grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
 then
@@ -970,9 +923,9 @@ BFD_VERSION=`grep INIT_AUTOMAKE ${srcdir}/../bfd/configure.in | sed -n -e 's/[
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:974: checking for a BSD compatible install" >&5
+echo "configure:927: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
-if eval "test \"\${ac_cv_path_install+set}\" = set"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
     IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
@@ -990,10 +943,6 @@ else
             grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
 	    # AIX install.  It has an incompatible calling convention.
 	    :
-	  elif test $ac_prog = install &&
-	    grep pwplus $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # program-specific install script used by HP pwplus--don't use.
-	    :
 	  else
 	    ac_cv_path_install="$ac_dir/$ac_prog -c"
 	    break 2
@@ -1022,12 +971,12 @@ echo "$ac_t""$INSTALL" 1>&6
 # It thinks the first close brace ends the variable substitution.
 test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
 
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
 
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
 echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:1031: checking whether build environment is sane" >&5
+echo "configure:980: checking whether build environment is sane" >&5
 # Just in case
 sleep 1
 echo timestamp > conftestfile
@@ -1075,18 +1024,18 @@ EOF_SED
   rm -f conftestsed
 fi
 test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},;$program_transform_name"
+  program_transform_name="s,^,${program_prefix},; $program_transform_name"
 # Use a double $ so make ignores it.
 test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},;$program_transform_name"
+  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
 
 # sed with no file args requires a program.
 test "$program_transform_name" = "" && program_transform_name="s,x,x,"
 
 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:1088: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:1037: checking whether ${MAKE-make} sets \${MAKE}" >&5
 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
+if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftestmake <<\EOF
@@ -1130,7 +1079,7 @@ EOF
 
 missing_dir=`cd $ac_aux_dir && pwd`
 echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1134: checking for working aclocal" >&5
+echo "configure:1083: checking for working aclocal" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -1143,7 +1092,7 @@ else
 fi
 
 echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1147: checking for working autoconf" >&5
+echo "configure:1096: checking for working autoconf" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -1156,7 +1105,7 @@ else
 fi
 
 echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1160: checking for working automake" >&5
+echo "configure:1109: checking for working automake" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -1169,7 +1118,7 @@ else
 fi
 
 echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1173: checking for working autoheader" >&5
+echo "configure:1122: checking for working autoheader" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -1182,7 +1131,7 @@ else
 fi
 
 echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1186: checking for working makeinfo" >&5
+echo "configure:1135: checking for working makeinfo" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -1205,8 +1154,8 @@ fi
 # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1209: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_AR+set}\" = set"; then
+echo "configure:1158: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$AR"; then
@@ -1237,8 +1186,8 @@ fi
 # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1241: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_RANLIB+set}\" = set"; then
+echo "configure:1190: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$RANLIB"; then
@@ -1269,8 +1218,8 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1273: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_RANLIB+set}\" = set"; then
+echo "configure:1222: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$RANLIB"; then
@@ -1375,8 +1324,8 @@ fi
 # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1379: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_RANLIB+set}\" = set"; then
+echo "configure:1328: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$RANLIB"; then
@@ -1414,11 +1363,11 @@ ac_prog=ld
 if test "$ac_cv_prog_gcc" = yes; then
   # Check if gcc -print-prog-name=ld gives a path.
   echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1418: checking for ld used by GCC" >&5
+echo "configure:1367: checking for ld used by GCC" >&5
   ac_prog=`($CC -print-prog-name=ld) 2>&5`
   case "$ac_prog" in
     # Accept absolute paths.
-    /* | [A-Za-z]:[\\/]*)
+    [\\/]* | [A-Za-z]:[\\/]*)
       re_direlt='/[^/][^/]*/\.\./'
       # Canonicalize the path of ld
       ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
@@ -1438,19 +1387,19 @@ echo "configure:1418: checking for ld used by GCC" >&5
   esac
 elif test "$with_gnu_ld" = yes; then
   echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1442: checking for GNU ld" >&5
+echo "configure:1391: checking for GNU ld" >&5
 else
   echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1445: checking for non-GNU ld" >&5
+echo "configure:1394: checking for non-GNU ld" >&5
 fi
-if eval "test \"\${ac_cv_path_LD+set}\" = set"; then
+if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
   for ac_dir in $PATH; do
     test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog"; then
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
       ac_cv_path_LD="$ac_dir/$ac_prog"
       # Check to see if the program is GNU ld.  I'd rather use --version,
       # but apparently some GNU ld's only accept -v.
@@ -1475,10 +1424,9 @@ else
   echo "$ac_t""no" 1>&6
 fi
 test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-
 echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1481: checking if the linker ($LD) is GNU ld" >&5
-if eval "test \"\${ac_cv_prog_gnu_ld+set}\" = set"; then
+echo "configure:1429: checking if the linker ($LD) is GNU ld" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   # I'd rather use --version here, but apparently some GNU ld's only accept -v.
@@ -1493,18 +1441,18 @@ echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6
 
 
 echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1497: checking for BSD-compatible nm" >&5
-if eval "test \"\${ac_cv_path_NM+set}\" = set"; then
+echo "configure:1445: checking for BSD-compatible nm" >&5
+if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$NM"; then
   # Let the user override the test.
   ac_cv_path_NM="$NM"
 else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
   for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
     test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/nm; then
+    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
       # Check to see if the nm accepts a BSD-compat flag.
       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
       #   nm: unknown option "B" ignored
@@ -1528,214 +1476,9 @@ fi
 NM="$ac_cv_path_NM"
 echo "$ac_t""$NM" 1>&6
 
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-echo $ac_n "checking command to parse $NM output""... $ac_c" 1>&6
-echo "configure:1535: checking command to parse $NM output" >&5
-if eval "test \"\${ac_cv_sys_global_symbol_pipe+set}\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  # These are sane defaults that work on at least a few old systems.
-# {They come from Ultrix.  What could be older than Ultrix?!! ;)}
-
-# Character class describing NM global symbol codes.
-ac_symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-ac_symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-# Define system-specific variables.
-case "$host_os" in
-aix*)
-  ac_symcode='[BCDT]'
-  ;;
-cygwin* | mingw*)
-  ac_symcode='[ABCDGISTW]'
-  ;;
-hpux*)
-  ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
-  ;;
-irix*)
-  ac_symcode='[BCDEGRST]'
-  ;;
-solaris*)
-  ac_symcode='[BDT]'
-  ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
-  ac_symcode='[ABCDGISTW]'
-fi
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
-  ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.* 	\($ac_symcode\) 	 	*\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'"
-
-  # Check to see that the pipe works correctly.
-  ac_pipe_works=no
-  rm -f conftest.$ac_ext
-  cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func;return 0;}
-EOF
-
-  if { (eval echo configure:1598: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    # Now try to grab the symbols.
-    ac_nlist=conftest.nm
-  
-    if { (eval echo configure:1602: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then
-
-      # Try sorting and uniquifying the output.
-      if sort "$ac_nlist" | uniq > "$ac_nlist"T; then
-	mv -f "$ac_nlist"T "$ac_nlist"
-      else
-	rm -f "$ac_nlist"T
-      fi
-
-      # Make sure that we snagged all the symbols we need.
-      if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then
-	if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then
-	  cat <<EOF > conftest.c
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
-	  # Now generate the symbol file.
-	  eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c'
-
-	  cat <<EOF >> conftest.c
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
-  const char *name;
-  lt_ptr_t address;
-}
-lt_preloaded_symbols[] =
-{
-EOF
-	sed 's/^. \(.*\) \(.*\)$/  {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c
-	cat <<\EOF >> conftest.c
-  {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
-	  # Now try linking the two files.
-	  mv conftest.$ac_objext conftestm.$ac_objext
-	  ac_save_LIBS="$LIBS"
-	  ac_save_CFLAGS="$CFLAGS"
-	  LIBS="conftestm.$ac_objext"
-	  CFLAGS="$CFLAGS$no_builtin_flag"
-	  if { (eval echo configure:1654: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-	    ac_pipe_works=yes
-	  else
-	    echo "configure: failed program was:" >&5
-	    cat conftest.c >&5
-	  fi
-	  LIBS="$ac_save_LIBS"
-	  CFLAGS="$ac_save_CFLAGS"
-	else
-	  echo "cannot find nm_test_func in $ac_nlist" >&5
-	fi
-      else
-	echo "cannot find nm_test_var in $ac_nlist" >&5
-      fi
-    else
-      echo "cannot run $ac_cv_sys_global_symbol_pipe" >&5
-    fi
-  else
-    echo "$progname: failed program was:" >&5
-    cat conftest.c >&5
-  fi
-  rm -rf conftest*
-
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$ac_pipe_works" = yes; then
-    if test x"$ac_symprfx" = x"_"; then
-      ac_cv_sys_symbol_underscore=yes
-    else
-      ac_cv_sys_symbol_underscore=no
-    fi
-    break
-  else
-    ac_cv_sys_global_symbol_pipe=
-  fi
-done
-
-fi
-
-
-ac_result=yes
-if test -z "$ac_cv_sys_global_symbol_pipe"; then
-   ac_result=no
-fi
-echo "$ac_t""$ac_result" 1>&6
-
-echo $ac_n "checking for _ prefix in compiled symbols""... $ac_c" 1>&6
-echo "configure:1700: checking for _ prefix in compiled symbols" >&5
-if eval "test \"\${ac_cv_sys_symbol_underscore+set}\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  ac_cv_sys_symbol_underscore=no
-cat > conftest.$ac_ext <<EOF
-void nm_test_func(){}
-int main(){nm_test_func;return 0;}
-EOF
-if { (eval echo configure:1709: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  # Now try to grab the symbols.
-  ac_nlist=conftest.nm
-  if { (eval echo configure:1712: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then
-    # See whether the symbols have a leading underscore.
-    if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
-      ac_cv_sys_symbol_underscore=yes
-    else
-      if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
-	:
-      else
-	echo "configure: cannot find nm_test_func in $ac_nlist" >&5
-      fi
-    fi
-  else
-    echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&5
-  fi
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.c >&5
-fi
-rm -rf conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_sys_symbol_underscore" 1>&6
-USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no}
-
 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1738: checking whether ln -s works" >&5
-if eval "test \"\${ac_cv_prog_LN_S+set}\" = set"; then
+echo "configure:1481: checking whether ln -s works" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   rm -f conftestdata
@@ -1755,23 +1498,36 @@ else
 fi
 
 
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
+
 # Check for any special flags to pass to ltconfig.
 libtool_flags="--cache-file=$cache_file"
 test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
 test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
 test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
 test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
 test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
 
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+  enableval="$enable_libtool_lock"
+  :
+fi
+
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+
 # Some flags need to be propagated to the compiler or linker for good
 # libtool support.
-case "$host" in
+case "$lt_target" in
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 1774 "configure"' > conftest.$ac_ext
-  if { (eval echo configure:1775: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  echo '#line 1530 "configure"' > conftest.$ac_ext
+  if { (eval echo configure:1531: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
     case "`/usr/bin/file conftest.o`" in
     *32-bit*)
       LD="${LD-ld} -32"
@@ -1792,19 +1548,19 @@ case "$host" in
   SAVE_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -belf"
   echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:1796: checking whether the C compiler needs -belf" >&5
-if eval "test \"\${lt_cv_cc_needs_belf+set}\" = set"; then
+echo "configure:1552: checking whether the C compiler needs -belf" >&5
+if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1801 "configure"
+#line 1557 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:1808: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1564: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   lt_cv_cc_needs_belf=yes
 else
@@ -1823,161 +1579,9 @@ echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
   fi
   ;;
 
-*-*-cygwin*)
-  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1831: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_DLLTOOL+set}\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_DLLTOOL"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1863: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_DLLTOOL+set}\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DLLTOOL="dlltool"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  DLLTOOL="false"
-fi
-fi
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1898: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_AS+set}\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ac_tool_prefix}as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_AS"; then
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1930: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_AS+set}\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="as"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-else
-  AS="false"
-fi
-fi
-
-
-  ;;
 
 esac
 
-# enable the --disable-libtool-lock switch
-
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
-  enableval="$enable_libtool_lock"
-  need_locks=$enableval
-else
-  need_locks=yes
-fi
-
-
-if test x"$need_locks" = xno; then
-  libtool_flags="$libtool_flags --disable-lock"
-fi
-
 
 # Save cache, so that ltconfig can load it
 cat > confcache <<\EOF
@@ -2030,16 +1634,17 @@ rm -f confcache
 
 # Actually configure libtool.  ac_aux_dir is where install-sh is found.
 CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
-DLLTOOL="$DLLTOOL" AS="$AS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
 ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
 || { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
 
 # Reload cache, that may have been modified by ltconfig
 if test -r "$cache_file"; then
   echo "loading cache $cache_file"
-      test -f "$cache_file" && . $cache_file
+  . $cache_file
 else
   echo "creating cache $cache_file"
   > $cache_file
@@ -2095,17 +1700,17 @@ EOF_SED
   rm -f conftestsed
 fi
 test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},;$program_transform_name"
+  program_transform_name="s,^,${program_prefix},; $program_transform_name"
 # Use a double $ so make ignores it.
 test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},;$program_transform_name"
+  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
 
 # sed with no file args requires a program.
 test "$program_transform_name" = "" && program_transform_name="s,x,x,"
 
 
 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:2109: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:1714: checking whether to enable maintainer-specific portions of Makefiles" >&5
     # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"
@@ -2128,12 +1733,12 @@ fi
   
 
 echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:2132: checking for Cygwin environment" >&5
-if eval "test \"\${ac_cv_cygwin+set}\" = set"; then
+echo "configure:1737: checking for Cygwin environment" >&5
+if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2137 "configure"
+#line 1742 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -2144,7 +1749,7 @@ int main() {
 return __CYGWIN__;
 ; return 0; }
 EOF
-if { (eval echo configure:2148: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1753: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_cygwin=yes
 else
@@ -2154,25 +1759,26 @@ else
   ac_cv_cygwin=no
 fi
 rm -f conftest*
+rm -f conftest*
 fi
 
 echo "$ac_t""$ac_cv_cygwin" 1>&6
 CYGWIN=
 test "$ac_cv_cygwin" = yes && CYGWIN=yes
 echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:2164: checking for mingw32 environment" >&5
-if eval "test \"\${ac_cv_mingw32+set}\" = set"; then
+echo "configure:1770: checking for mingw32 environment" >&5
+if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2169 "configure"
+#line 1775 "configure"
 #include "confdefs.h"
 
 int main() {
 return __MINGW32__;
 ; return 0; }
 EOF
-if { (eval echo configure:2176: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1782: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_mingw32=yes
 else
@@ -2182,57 +1788,29 @@ else
   ac_cv_mingw32=no
 fi
 rm -f conftest*
+rm -f conftest*
 fi
 
 echo "$ac_t""$ac_cv_mingw32" 1>&6
 MINGW32=
 test "$ac_cv_mingw32" = yes && MINGW32=yes
-echo $ac_n "checking for EMX OS/2 environment""... $ac_c" 1>&6
-echo "configure:2192: checking for EMX OS/2 environment" >&5
-if eval "test \"\${ac_cv_emxos2+set}\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2197 "configure"
-#include "confdefs.h"
-
-int main() {
-return __EMX__;
-; return 0; }
-EOF
-if { (eval echo configure:2204: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_emxos2=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_emxos2=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_emxos2" 1>&6
-EMXOS2=
-test "$ac_cv_emxos2" = yes && EMXOS2=yes
-
 
 
 echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:2223: checking for executable suffix" >&5
-if eval "test \"\${ac_cv_exeext+set}\" = set"; then
+echo "configure:1801: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
-  if test "$CYGWIN" = yes || test "$MINGW32" = yes || test "$EMXOS2" = yes; then
+  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
   ac_cv_exeext=.exe
 else
   rm -f conftest*
   echo 'int main () { return 0; }' > conftest.$ac_ext
   ac_cv_exeext=
-  if { (eval echo configure:2233: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+  if { (eval echo configure:1811: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
     for file in conftest.*; do
       case $file in
-      *.c | *.C | *.o | *.obj | *.xcoff) ;;
+      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
       *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
       esac
     done
@@ -2255,8 +1833,8 @@ ac_exeext=$EXEEXT
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2259: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:1837: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
@@ -2285,8 +1863,8 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2289: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:1867: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
@@ -2332,12 +1910,12 @@ fi
 
   if test -z "$CC"; then
     case "`uname -s`" in
-    *win32* | *WIN32* | *CYGWIN*)
+    *win32* | *WIN32*)
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2340: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:1918: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -n "$CC"; then
@@ -2367,8 +1945,8 @@ fi
   test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
 fi
 
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:2372: checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) works" >&5
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:1950: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -2379,12 +1957,12 @@ cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 2383 "configure"
+#line 1961 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:2388: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1966: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -2409,14 +1987,14 @@ echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
 if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2414: checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:1992: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2419: checking whether we are using GNU C" >&5
-if eval "test \"\${ac_cv_prog_gcc+set}\" = set"; then
+echo "configure:1997: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.c <<EOF
@@ -2424,7 +2002,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2428: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2006: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -2443,8 +2021,8 @@ ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2447: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"\${ac_cv_prog_cc_g+set}\" = set"; then
+echo "configure:2025: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   echo 'void f(){}' > conftest.c
@@ -2477,13 +2055,13 @@ fi
 
 ALL_LINGUAS=
 echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:2481: checking how to run the C preprocessor" >&5
+echo "configure:2059: checking how to run the C preprocessor" >&5
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
 fi
 if test -z "$CPP"; then
-if eval "test \"\${ac_cv_prog_CPP+set}\" = set"; then
+if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
     # This must be in double quotes, not single quotes, because CPP may get
@@ -2492,13 +2070,13 @@ else
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp.
   cat > conftest.$ac_ext <<EOF
-#line 2496 "configure"
+#line 2074 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2502: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2080: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -2509,13 +2087,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -E -traditional-cpp"
   cat > conftest.$ac_ext <<EOF
-#line 2513 "configure"
+#line 2091 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2519: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2097: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -2526,13 +2104,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -nologo -E"
   cat > conftest.$ac_ext <<EOF
-#line 2530 "configure"
+#line 2108 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2536: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2114: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -2557,12 +2135,12 @@ fi
 echo "$ac_t""$CPP" 1>&6
 
 echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:2561: checking for ANSI C header files" >&5
-if eval "test \"\${ac_cv_header_stdc+set}\" = set"; then
+echo "configure:2139: checking for ANSI C header files" >&5
+if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2566 "configure"
+#line 2144 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 #include <stdarg.h>
@@ -2570,7 +2148,7 @@ else
 #include <float.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2574: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2152: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2587,7 +2165,7 @@ rm -f conftest*
 if test $ac_cv_header_stdc = yes; then
   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 2591 "configure"
+#line 2169 "configure"
 #include "confdefs.h"
 #include <string.h>
 EOF
@@ -2605,7 +2183,7 @@ fi
 if test $ac_cv_header_stdc = yes; then
   # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 2609 "configure"
+#line 2187 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 EOF
@@ -2626,7 +2204,7 @@ if test "$cross_compiling" = yes; then
   :
 else
   cat > conftest.$ac_ext <<EOF
-#line 2630 "configure"
+#line 2208 "configure"
 #include "confdefs.h"
 #include <ctype.h>
 #define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
@@ -2637,7 +2215,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
 exit (0); }
 
 EOF
-if { (eval echo configure:2641: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2219: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   :
 else
@@ -2661,12 +2239,12 @@ EOF
 fi
 
 echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:2665: checking for working const" >&5
-if eval "test \"\${ac_cv_c_const+set}\" = set"; then
+echo "configure:2243: checking for working const" >&5
+if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2670 "configure"
+#line 2248 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -2715,7 +2293,7 @@ ccp = (char const *const *) p;
 
 ; return 0; }
 EOF
-if { (eval echo configure:2719: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2297: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_const=yes
 else
@@ -2736,21 +2314,21 @@ EOF
 fi
 
 echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:2740: checking for inline" >&5
-if eval "test \"\${ac_cv_c_inline+set}\" = set"; then
+echo "configure:2318: checking for inline" >&5
+if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_cv_c_inline=no
 for ac_kw in inline __inline__ __inline; do
   cat > conftest.$ac_ext <<EOF
-#line 2747 "configure"
+#line 2325 "configure"
 #include "confdefs.h"
 
 int main() {
-} $ac_kw int foo() {
+} $ac_kw foo() {
 ; return 0; }
 EOF
-if { (eval echo configure:2754: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2332: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_inline=$ac_kw; break
 else
@@ -2776,12 +2354,12 @@ EOF
 esac
 
 echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:2780: checking for off_t" >&5
-if eval "test \"\${ac_cv_type_off_t+set}\" = set"; then
+echo "configure:2358: checking for off_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2785 "configure"
+#line 2363 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -2792,31 +2370,29 @@ EOF
 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
   egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
   rm -rf conftest*
-  eval "ac_cv_type_off_t=yes"
+  ac_cv_type_off_t=yes
 else
   rm -rf conftest*
-  eval "ac_cv_type_off_t=no"
+  ac_cv_type_off_t=no
 fi
 rm -f conftest*
 
 fi
-if eval "test \"`echo '$ac_cv_type_'off_t`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-  cat >> confdefs.h <<EOF
+echo "$ac_t""$ac_cv_type_off_t" 1>&6
+if test $ac_cv_type_off_t = no; then
+  cat >> confdefs.h <<\EOF
 #define off_t long
 EOF
 
 fi
 
 echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:2815: checking for size_t" >&5
-if eval "test \"\${ac_cv_type_size_t+set}\" = set"; then
+echo "configure:2391: checking for size_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2820 "configure"
+#line 2396 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -2827,19 +2403,17 @@ EOF
 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
   egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
   rm -rf conftest*
-  eval "ac_cv_type_size_t=yes"
+  ac_cv_type_size_t=yes
 else
   rm -rf conftest*
-  eval "ac_cv_type_size_t=no"
+  ac_cv_type_size_t=no
 fi
 rm -f conftest*
 
 fi
-if eval "test \"`echo '$ac_cv_type_'size_t`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-  cat >> confdefs.h <<EOF
+echo "$ac_t""$ac_cv_type_size_t" 1>&6
+if test $ac_cv_type_size_t = no; then
+  cat >> confdefs.h <<\EOF
 #define size_t unsigned
 EOF
 
@@ -2848,19 +2422,19 @@ fi
 # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
 # for constant arguments.  Useless!
 echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:2852: checking for working alloca.h" >&5
-if eval "test \"\${ac_cv_header_alloca_h+set}\" = set"; then
+echo "configure:2426: checking for working alloca.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2857 "configure"
+#line 2431 "configure"
 #include "confdefs.h"
 #include <alloca.h>
 int main() {
 char *p = alloca(2 * sizeof(int));
 ; return 0; }
 EOF
-if { (eval echo configure:2864: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2438: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_header_alloca_h=yes
 else
@@ -2881,12 +2455,12 @@ EOF
 fi
 
 echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:2885: checking for alloca" >&5
-if eval "test \"\${ac_cv_func_alloca_works+set}\" = set"; then
+echo "configure:2459: checking for alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2890 "configure"
+#line 2464 "configure"
 #include "confdefs.h"
 
 #ifdef __GNUC__
@@ -2914,7 +2488,7 @@ int main() {
 char *p = (char *) alloca(1);
 ; return 0; }
 EOF
-if { (eval echo configure:2918: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2492: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_func_alloca_works=yes
 else
@@ -2946,12 +2520,12 @@ EOF
 
 
 echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:2950: checking whether alloca needs Cray hooks" >&5
-if eval "test \"\${ac_cv_os_cray+set}\" = set"; then
+echo "configure:2524: checking whether alloca needs Cray hooks" >&5
+if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2955 "configure"
+#line 2529 "configure"
 #include "confdefs.h"
 #if defined(CRAY) && ! defined(CRAY2)
 webecray
@@ -2976,12 +2550,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6
 if test $ac_cv_os_cray = yes; then
 for ac_func in _getb67 GETB67 getb67; do
   echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2980: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:2554: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2985 "configure"
+#line 2559 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -2990,7 +2564,6 @@ else
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char $ac_func();
-char (*f)();
 
 int main() {
 
@@ -3000,12 +2573,12 @@ int main() {
 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
 choke me
 #else
-f = $ac_func;
+$ac_func();
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:3009: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2582: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -3032,15 +2605,15 @@ done
 fi
 
 echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:3036: checking stack direction for C alloca" >&5
-if eval "test \"\${ac_cv_c_stack_direction+set}\" = set"; then
+echo "configure:2609: checking stack direction for C alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test "$cross_compiling" = yes; then
   ac_cv_c_stack_direction=0
 else
   cat > conftest.$ac_ext <<EOF
-#line 3044 "configure"
+#line 2617 "configure"
 #include "confdefs.h"
 find_stack_direction ()
 {
@@ -3059,7 +2632,7 @@ main ()
   exit (find_stack_direction() < 0);
 }
 EOF
-if { (eval echo configure:3063: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2636: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_c_stack_direction=1
 else
@@ -3084,17 +2657,17 @@ for ac_hdr in unistd.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3088: checking for $ac_hdr" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:2661: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3093 "configure"
+#line 2666 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3098: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2671: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -3123,12 +2696,12 @@ done
 for ac_func in getpagesize
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3127: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:2700: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3132 "configure"
+#line 2705 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -3137,7 +2710,6 @@ else
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char $ac_func();
-char (*f)();
 
 int main() {
 
@@ -3147,12 +2719,12 @@ int main() {
 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
 choke me
 #else
-f = $ac_func;
+$ac_func();
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:3156: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2728: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -3177,15 +2749,15 @@ fi
 done
 
 echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:3181: checking for working mmap" >&5
-if eval "test \"\${ac_cv_func_mmap_fixed_mapped+set}\" = set"; then
+echo "configure:2753: checking for working mmap" >&5
+if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test "$cross_compiling" = yes; then
   ac_cv_func_mmap_fixed_mapped=no
 else
   cat > conftest.$ac_ext <<EOF
-#line 3189 "configure"
+#line 2761 "configure"
 #include "confdefs.h"
 
 /* Thanks to Mike Haertel and Jim Avera for this test.
@@ -3325,7 +2897,7 @@ main()
 }
 
 EOF
-if { (eval echo configure:3329: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2901: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_func_mmap_fixed_mapped=yes
 else
@@ -3353,17 +2925,17 @@ unistd.h values.h sys/param.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3357: checking for $ac_hdr" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:2929: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3362 "configure"
+#line 2934 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3367: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2939: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -3393,12 +2965,12 @@ done
 __argz_count __argz_stringify __argz_next
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3397: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:2969: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3402 "configure"
+#line 2974 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -3407,7 +2979,6 @@ else
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char $ac_func();
-char (*f)();
 
 int main() {
 
@@ -3417,12 +2988,12 @@ int main() {
 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
 choke me
 #else
-f = $ac_func;
+$ac_func();
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:3426: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2997: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -3451,12 +3022,12 @@ done
      for ac_func in stpcpy
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3455: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:3026: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3460 "configure"
+#line 3031 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -3465,7 +3036,6 @@ else
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char $ac_func();
-char (*f)();
 
 int main() {
 
@@ -3475,12 +3045,12 @@ int main() {
 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
 choke me
 #else
-f = $ac_func;
+$ac_func();
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:3484: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3054: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -3514,19 +3084,19 @@ EOF
 
    if test $ac_cv_header_locale_h = yes; then
     echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:3518: checking for LC_MESSAGES" >&5
-if eval "test \"\${am_cv_val_LC_MESSAGES+set}\" = set"; then
+echo "configure:3088: checking for LC_MESSAGES" >&5
+if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3523 "configure"
+#line 3093 "configure"
 #include "confdefs.h"
 #include <locale.h>
 int main() {
 return LC_MESSAGES
 ; return 0; }
 EOF
-if { (eval echo configure:3530: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3100: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   am_cv_val_LC_MESSAGES=yes
 else
@@ -3547,7 +3117,7 @@ EOF
     fi
   fi
    echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:3551: checking whether NLS is requested" >&5
+echo "configure:3121: checking whether NLS is requested" >&5
         # Check whether --enable-nls or --disable-nls was given.
 if test "${enable_nls+set}" = set; then
   enableval="$enable_nls"
@@ -3567,7 +3137,7 @@ fi
 EOF
 
       echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:3571: checking whether included gettext is requested" >&5
+echo "configure:3141: checking whether included gettext is requested" >&5
       # Check whether --with-included-gettext or --without-included-gettext was given.
 if test "${with_included_gettext+set}" = set; then
   withval="$with_included_gettext"
@@ -3586,17 +3156,17 @@ fi
 
 	ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:3590: checking for libintl.h" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:3160: checking for libintl.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3595 "configure"
+#line 3165 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3600: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3170: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -3613,19 +3183,19 @@ fi
 if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:3617: checking for gettext in libc" >&5
-if eval "test \"\${gt_cv_func_gettext_libc+set}\" = set"; then
+echo "configure:3187: checking for gettext in libc" >&5
+if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3622 "configure"
+#line 3192 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 int main() {
 return (int) gettext ("")
 ; return 0; }
 EOF
-if { (eval echo configure:3629: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3199: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gt_cv_func_gettext_libc=yes
 else
@@ -3641,15 +3211,15 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6
 
 	   if test "$gt_cv_func_gettext_libc" != "yes"; then
 	     echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:3645: checking for bindtextdomain in -lintl" >&5
-ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-:%__p__%'`
-if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
+echo "configure:3215: checking for bindtextdomain in -lintl" >&5
+ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_save_LIBS="$LIBS"
 LIBS="-lintl  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3653 "configure"
+#line 3223 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3660,7 +3230,7 @@ int main() {
 bindtextdomain()
 ; return 0; }
 EOF
-if { (eval echo configure:3664: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3234: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -3676,19 +3246,19 @@ fi
 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:3680: checking for gettext in libintl" >&5
-if eval "test \"\${gt_cv_func_gettext_libintl+set}\" = set"; then
+echo "configure:3250: checking for gettext in libintl" >&5
+if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3685 "configure"
+#line 3255 "configure"
 #include "confdefs.h"
 
 int main() {
 return (int) gettext ("")
 ; return 0; }
 EOF
-if { (eval echo configure:3692: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3262: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gt_cv_func_gettext_libintl=yes
 else
@@ -3716,8 +3286,8 @@ EOF
 	      # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3720: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_MSGFMT+set}\" = set"; then
+echo "configure:3290: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$MSGFMT" in
@@ -3750,12 +3320,12 @@ fi
 		for ac_func in dcgettext
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3754: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:3324: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3759 "configure"
+#line 3329 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -3764,7 +3334,6 @@ else
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char $ac_func();
-char (*f)();
 
 int main() {
 
@@ -3774,12 +3343,12 @@ int main() {
 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
 choke me
 #else
-f = $ac_func;
+$ac_func();
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:3783: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3352: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -3806,8 +3375,8 @@ done
 		# Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3810: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_GMSGFMT+set}\" = set"; then
+echo "configure:3379: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$GMSGFMT" in
@@ -3842,8 +3411,8 @@ fi
 		# Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3846: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_XGETTEXT+set}\" = set"; then
+echo "configure:3415: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$XGETTEXT" in
@@ -3874,7 +3443,7 @@ else
 fi
 
 		cat > conftest.$ac_ext <<EOF
-#line 3878 "configure"
+#line 3447 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -3882,7 +3451,7 @@ extern int _nl_msg_cat_cntr;
 			       return _nl_msg_cat_cntr
 ; return 0; }
 EOF
-if { (eval echo configure:3886: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3455: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   CATOBJEXT=.gmo
 		   DATADIRNAME=share
@@ -3914,8 +3483,8 @@ fi
         # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3918: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_MSGFMT+set}\" = set"; then
+echo "configure:3487: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$MSGFMT" in
@@ -3948,8 +3517,8 @@ fi
         # Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3952: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_GMSGFMT+set}\" = set"; then
+echo "configure:3521: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$GMSGFMT" in
@@ -3984,8 +3553,8 @@ fi
         # Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3988: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_XGETTEXT+set}\" = set"; then
+echo "configure:3557: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   case "$XGETTEXT" in
@@ -4074,7 +3643,7 @@ fi
        LINGUAS=
      else
        echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:4078: checking for catalogs to be installed" >&5
+echo "configure:3647: checking for catalogs to be installed" >&5
        NEW_LINGUAS=
        for lang in ${LINGUAS=$ALL_LINGUAS}; do
          case "$ALL_LINGUAS" in
@@ -4102,17 +3671,17 @@ echo "configure:4078: checking for catalogs to be installed" >&5
       if test "$CATOBJEXT" = ".cat"; then
 	 ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:4106: checking for linux/version.h" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:3675: checking for linux/version.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4111 "configure"
+#line 3680 "configure"
 #include "confdefs.h"
 #include <linux/version.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4116: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3685: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -4189,9 +3758,9 @@ fi
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:4193: checking for a BSD compatible install" >&5
+echo "configure:3762: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
-if eval "test \"\${ac_cv_path_install+set}\" = set"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
     IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
@@ -4209,10 +3778,6 @@ else
             grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
 	    # AIX install.  It has an incompatible calling convention.
 	    :
-	  elif test $ac_prog = install &&
-	    grep pwplus $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # program-specific install script used by HP pwplus--don't use.
-	    :
 	  else
 	    ac_cv_path_install="$ac_dir/$ac_prog -c"
 	    break 2
@@ -4241,7 +3806,7 @@ echo "$ac_t""$INSTALL" 1>&6
 # It thinks the first close brace ends the variable substitution.
 test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
 
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
 
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
@@ -4250,17 +3815,17 @@ for ac_hdr in string.h strings.h stdlib.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4254: checking for $ac_hdr" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:3819: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4259 "configure"
+#line 3824 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4264: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3829: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -4519,7 +4084,7 @@ do
     echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
     exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
   -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13.1"
+    echo "$CONFIG_STATUS generated by autoconf version 2.13"
     exit 0 ;;
   -help | --help | --hel | --he | --h)
     echo "\$ac_cs_usage"; exit 0 ;;
@@ -4591,12 +4156,7 @@ s%@MAKEINFO@%$MAKEINFO%g
 s%@SET_MAKE@%$SET_MAKE%g
 s%@AR@%$AR%g
 s%@RANLIB@%$RANLIB%g
-s%@LD@%$LD%g
-s%@NM@%$NM%g
-s%@USE_SYMBOL_UNDERSCORE@%$USE_SYMBOL_UNDERSCORE%g
 s%@LN_S@%$LN_S%g
-s%@DLLTOOL@%$DLLTOOL%g
-s%@AS@%$AS%g
 s%@LIBTOOL@%$LIBTOOL%g
 s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
 s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
@@ -4848,5 +4408,5 @@ exit 0
 EOF
 chmod +x $CONFIG_STATUS
 rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || $SHELL $CONFIG_STATUS || exit 1
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
 
diff --git a/opcodes/po/POTFILES.in b/opcodes/po/POTFILES.in
index 743a65e..ec23c5a 100644
--- a/opcodes/po/POTFILES.in
+++ b/opcodes/po/POTFILES.in
@@ -25,6 +25,8 @@ h8300-dis.c
 h8500-dis.c
 h8500-opc.h
 hppa-dis.c
+i370-dis.c
+i370-opc.c
 i386-dis.c
 i960-dis.c
 m10200-dis.c
@@ -48,6 +50,8 @@ mips-dis.c
 mips-opc.c
 mips16-opc.c
 ns32k-dis.c
+pj-dis.c
+pj-opc.c
 ppc-dis.c
 ppc-opc.c
 sh-dis.c
diff --git a/opcodes/po/opcodes.pot b/opcodes/po/opcodes.pot
index 9601bdd..91145d3 100644
--- a/opcodes/po/opcodes.pot
+++ b/opcodes/po/opcodes.pot
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 1999-07-11 22:05-0400\n"
+"POT-Creation-Date: 2000-02-25 22:16-0500\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -48,15 +48,32 @@ msgstr ""
 msgid "branch address not on 4 byte boundary"
 msgstr ""
 
-#: arm-dis.c:407
+#: arm-dis.c:470
 msgid "<illegal precision>"
 msgstr ""
 
+#: arm-dis.c:882
+#, c-format
+msgid "Unrecognised register name set: %s\n"
+msgstr ""
+
+#: arm-dis.c:889
+#, c-format
+msgid "Unrecognised disassembler option: %s\n"
+msgstr ""
+
+#: arm-dis.c:1053
+msgid ""
+"\n"
+"The following ARM specific disassembler options are supported for use with\n"
+"the -M switch:\n"
+msgstr ""
+
 #: cgen-asm.c:224
 msgid "unrecognized keyword/register name"
 msgstr ""
 
-#: cgen-asm.c:332 fr30-ibld.c:223 m32r-ibld.c:223
+#: cgen-asm.c:332 fr30-ibld.c:223 m32r-ibld.c:227
 #, c-format
 msgid "operand out of range (%ld not between %ld and %ld)"
 msgstr ""
@@ -72,83 +89,84 @@ msgid "<unknown register %d>"
 msgstr ""
 
 #. Can't happen.
-#: dis-buf.c:50
+#: dis-buf.c:56
 #, c-format
 msgid "Unknown error %d\n"
 msgstr ""
 
-#: dis-buf.c:55
+#: dis-buf.c:61
 #, c-format
 msgid "Address 0x%x is out of bounds.\n"
 msgstr ""
 
-#: fr30-asm.c:303 m32r-asm.c:299
+#: fr30-asm.c:305 m32r-asm.c:313
 #, c-format
 msgid "Unrecognized field %d while parsing.\n"
 msgstr ""
 
 #. We couldn't parse it.
-#: fr30-asm.c:367 fr30-asm.c:436 m32r-asm.c:363 m32r-asm.c:432
+#: fr30-asm.c:369 fr30-asm.c:373 fr30-asm.c:447 m32r-asm.c:377 m32r-asm.c:381
+#: m32r-asm.c:455
 msgid "unrecognized instruction"
 msgstr ""
 
 #. Syntax char didn't match.  Can't be this insn.
 #. FIXME: would like to return something like
 #. "expected char `c'"
-#: fr30-asm.c:404 m32r-asm.c:400
+#: fr30-asm.c:415 m32r-asm.c:423
 msgid "syntax error"
 msgstr ""
 
-#: fr30-asm.c:430 m32r-asm.c:426
+#: fr30-asm.c:441 m32r-asm.c:449
 msgid "junk at end of line"
 msgstr ""
 
-#: fr30-asm.c:523 m32r-asm.c:519
+#: fr30-asm.c:534 m32r-asm.c:552
 #, c-format
 msgid "bad instruction `%.50s...'"
 msgstr ""
 
-#: fr30-asm.c:526 m32r-asm.c:522
+#: fr30-asm.c:537 m32r-asm.c:555
 #, c-format
 msgid "bad instruction `%.50s'"
 msgstr ""
 
-#: fr30-dis.c:300 m32r-dis.c:227
+#: fr30-dis.c:300 m32r-dis.c:239
 #, c-format
 msgid "Unrecognized field %d while printing insn.\n"
 msgstr ""
 
-#: fr30-ibld.c:210 m32r-ibld.c:210
+#: fr30-ibld.c:210 m32r-ibld.c:211
 #, c-format
 msgid "operand out of range (%lu not between 0 and %lu)"
 msgstr ""
 
-#: fr30-ibld.c:749 m32r-ibld.c:659
+#: fr30-ibld.c:745 m32r-ibld.c:679
 #, c-format
 msgid "Unrecognized field %d while building insn.\n"
 msgstr ""
 
-#: fr30-ibld.c:952 m32r-ibld.c:770
+#: fr30-ibld.c:947 m32r-ibld.c:809
 #, c-format
 msgid "Unrecognized field %d while decoding insn.\n"
 msgstr ""
 
-#: fr30-ibld.c:1096 m32r-ibld.c:863
+#: fr30-ibld.c:1091 m32r-ibld.c:914
 #, c-format
 msgid "Unrecognized field %d while getting int operand.\n"
 msgstr ""
 
-#: fr30-ibld.c:1225 m32r-ibld.c:941
+#: fr30-ibld.c:1220 m32r-ibld.c:1004
 #, c-format
 msgid "Unrecognized field %d while getting vma operand.\n"
 msgstr ""
 
-#: fr30-ibld.c:1358 m32r-ibld.c:1023
+#: fr30-ibld.c:1349 m32r-ibld.c:1097
 #, c-format
 msgid "Unrecognized field %d while setting int operand.\n"
 msgstr ""
 
-#: fr30-ibld.c:1484 m32r-ibld.c:1098
+#: fr30-ibld.c:1471 m32r-ibld.c:1183
 #, c-format
 msgid "Unrecognized field %d while setting vma operand.\n"
 msgstr ""
@@ -184,7 +202,7 @@ msgstr ""
 msgid "unknown\t0x%04lx"
 msgstr ""
 
-#: m10300-dis.c:546
+#: m10300-dis.c:680
 #, c-format
 msgid "unknown\t0x%04x"
 msgstr ""