* mon960-rom.c: New file; support mon960 rom monitor on i960.

       * monitor.c (monitor_debug): Change remotedebug to buffer strings.
       * monitor.c (monitor_open): Add test for flag MO_NO_ECHO_ON_OPEN before
       epecting prompt and echo during open.
       * monitor.c (monitor_stop): Add test for flag MO_SEND_BREAK_ON_OPEN to
       determine if break should be sent as stop command.
       * monitor.h: Add flags MO_NO_ECHO_ON_OPEN and MO_SEND_BREAK_ON_OPEN.
       * i960-tdep.c (mon960_frame_chain_valid): New function for getting
       stack frame on mon960.
       * Makefile.in: Add mon960 files.
       * configure.in: Changed i960-*-coff* and i960-*-elf* to target mon960;
       added i960-nindy-coff* and i960-nindy-elf* for target nindy.
       * configure: Regenerated.
       * config/i960/mon960.mt, config/i960/tm-mon960.h: New files;
       support mon960 rom monitor on i960.

7 files changed, 425 insertions, 4 deletions

diff --git a/gdb/config/i960/mon960.mt b/gdb/config/i960/mon960.mt
new file mode 100644
index 0000000..7095ed6
--- /dev/null
+++ b/gdb/config/i960/mon960.mt
@@ -0,0 +1,4 @@
+# Target: Intel 960 rom monitor
+TDEPFILES= i960-tdep.o monitor.o mon960-rom.o ttyflush.o xmodem.o dsrec.o
+TM_FILE= tm-mon960.h
+
diff --git a/gdb/config/i960/tm-mon960.h b/gdb/config/i960/tm-mon960.h
new file mode 100644
index 0000000..eda15cd
--- /dev/null
+++ b/gdb/config/i960/tm-mon960.h
@@ -0,0 +1,92 @@
+/* Parameters for Intel 960 running MON960 monitor, for GDB, the GNU debugger.
+   Copyright (C) 1990-1991 Free Software Foundation, Inc.
+   Contributed by Intel Corporation and Cygnus Support.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/*****************************************************************************
+ * Definitions to target GDB to an i960 debugged over a serial line.
+ ******************************************************************************/
+
+#include "i960/tm-i960.h"
+
+/* redefined from tm-i960.h */
+/* Number of machine registers */
+#undef NUM_REGS 
+#define NUM_REGS 40
+
+/* Initializer for an array of names of registers.
+   There should be NUM_REGS strings in this initializer.  */
+#undef REGISTER_NAMES 
+#define REGISTER_NAMES { \
+	/*  0 */ "pfp", "sp",  "rip", "r3",  "r4",  "r5",  "r6",  "r7", \
+	/*  8 */ "r8",  "r9",  "r10", "r11", "r12", "r13", "r14", "r15",\
+	/* 16 */ "g0",  "g1",  "g2",  "g3",  "g4",  "g5",  "g6",  "g7", \
+	/* 24 */ "g8",  "g9",  "g10", "g11", "g12", "g13", "g14", "fp", \
+	/* 32 */ "pc",  "ac",  "tc",  "ip",  "fp0", "fp1", "fp2", "fp3",\
+}
+
+
+/* Override the standard gdb prompt when compiled for this target.  */
+
+#define	DEFAULT_PROMPT	"(gdb960) "
+
+/* Additional command line options accepted by mon960 gdb's, for handling
+   the remote-mon960.c interface.  These should really be target-specific
+   rather than architecture-specific.  */
+
+/* FIXME - should use this instead of the "send_break" hack in monitor.c */
+extern int mon960_initial_brk;	/* Send a BREAK to reset board first */
+extern char *mon960_ttyname;	/* Name of serial port to talk to mon960 */
+
+#define	ADDITIONAL_OPTIONS \
+	/* FIXME {"brk", no_argument, &mon960_initial_brk, 1}, */	\
+	{"ser", required_argument, 0, 1004},  /* 1004 is magic cookie for ADDL_CASES */
+
+#define	ADDITIONAL_OPTION_CASES	\
+	case 1004:	/* -ser option:  remote mon960 auto-start */	\
+	  mon960_ttyname = optarg;	\
+	  break;
+
+#define	ADDITIONAL_OPTION_HELP \
+	"\
+  /* FIXME - -brk              Send a break to a Mon960 target to reset it.\n*/\
+  -ser SERIAL       Open remote Mon960 session to SERIAL port.\n\
+"
+
+/* FRAME_CHAIN_VALID returns zero if the given frame is the outermost one
+   and has no caller.
+
+   On the i960, each various target system type defines FRAME_CHAIN_VALID,
+   since it differs between Nindy, Mon960 and VxWorks, the currently supported
+   targets types.  */
+
+#define	FRAME_CHAIN_VALID(chain, thisframe) \
+	mon960_frame_chain_valid (chain, thisframe)
+
+extern int
+mon960_frame_chain_valid();		/* See i960-tdep.c */
+
+/* Sequence of bytes for breakpoint instruction */
+
+#define BREAKPOINT {0x00, 0x3e, 0x00, 0x66}
+
+/* Amount ip must be decremented by after a breakpoint.
+ * This is often the number of bytes in BREAKPOINT but not always.
+ */
+
+#define DECR_PC_AFTER_BREAK 4
diff --git a/gdb/configure b/gdb/configure
index 222e89f..24bef95 100755
--- a/gdb/configure
+++ b/gdb/configure
@@ -3078,8 +3078,10 @@ i[3456]86-*-netware*)	gdb_target=i386nw
 i[3456]86-*-osf1mk*)	gdb_target=i386mk ;;
 i[3456]86-*-cygwin32)	gdb_target=cygwin32  ;;
 i960-*-bout*)		gdb_target=vxworks960 ;;
-i960-*-coff*)		gdb_target=nindy960 ;;
-i960-*-elf*)		gdb_target=nindy960 ;;
+i960-nindy-coff*)	gdb_target=nindy960 ;;
+i960-*-coff*)		gdb_target=mon960 ;;
+i960-nindy-elf*)	gdb_target=nindy960 ;;
+i960-*-elf*)		gdb_target=mon960 ;;
 
 i960-*-nindy*)		gdb_target=nindy960 ;;
 i960-*-vxworks*)	gdb_target=vxworks960 ;;
diff --git a/gdb/configure.in b/gdb/configure.in
index 78efdc4..d3110f9 100644
--- a/gdb/configure.in
+++ b/gdb/configure.in
@@ -472,8 +472,10 @@ i[3456]86-*-netware*)	gdb_target=i386nw
 i[3456]86-*-osf1mk*)	gdb_target=i386mk ;;
 i[3456]86-*-cygwin32)	gdb_target=cygwin32  ;;
 i960-*-bout*)		gdb_target=vxworks960 ;;
-i960-*-coff*)		gdb_target=nindy960 ;;
-i960-*-elf*)		gdb_target=nindy960 ;;
+i960-nindy-coff*)	gdb_target=nindy960 ;;
+i960-*-coff*)		gdb_target=mon960 ;;
+i960-nindy-elf*)	gdb_target=nindy960 ;;
+i960-*-elf*)		gdb_target=mon960 ;;
 
 i960-*-nindy*)		gdb_target=nindy960 ;;
 i960-*-vxworks*)	gdb_target=vxworks960 ;;
diff --git a/gdb/i960-tdep.c b/gdb/i960-tdep.c
index 081ad6f..5b7f477 100644
--- a/gdb/i960-tdep.c
+++ b/gdb/i960-tdep.c
@@ -760,6 +760,53 @@ next_insn (memaddr, pword1, pword2)
     return 0;
 }
 
+/* 'start_frame' is a variable in the MON960 runtime startup routine
+   that contains the frame pointer of the 'start' routine (the routine
+   that calls 'main').  By reading its contents out of remote memory,
+   we can tell where the frame chain ends:  backtraces should halt before
+   they display this frame.  */
+
+int
+mon960_frame_chain_valid (chain, curframe)
+    unsigned int chain;
+    struct frame_info *curframe;
+{
+	struct symbol *sym;
+	struct minimal_symbol *msymbol;
+
+	/* crtmon960.o is an assembler module that is assumed to be linked
+	 * first in an i80960 executable.  It contains the true entry point;
+	 * it performs startup up initialization and then calls 'main'.
+	 *
+	 * 'sf' is the name of a variable in crtmon960.o that is set
+	 *	during startup to the address of the first frame.
+	 *
+	 * 'a' is the address of that variable in 80960 memory.
+	 */
+	static char sf[] = "start_frame";
+	CORE_ADDR a;
+
+
+	chain &= ~0x3f; /* Zero low 6 bits because previous frame pointers
+			   contain return status info in them.  */
+	if ( chain == 0 ){
+		return 0;
+	}
+
+	sym = lookup_symbol(sf, 0, VAR_NAMESPACE, (int *)NULL, 
+				  (struct symtab **)NULL);
+	if ( sym != 0 ){
+		a = SYMBOL_VALUE (sym);
+	} else {
+		msymbol = lookup_minimal_symbol (sf, NULL, NULL);
+		if (msymbol == NULL)
+			return 0;
+		a = SYMBOL_VALUE_ADDRESS (msymbol);
+	}
+
+	return ( chain != read_memory_integer(a,4) );
+}
+
 void
 _initialize_i960_tdep ()
 {
diff --git a/gdb/mon960-rom.c b/gdb/mon960-rom.c
new file mode 100644
index 0000000..5a79923
--- /dev/null
+++ b/gdb/mon960-rom.c
@@ -0,0 +1,270 @@
+/* Remote target glue for the Intel 960 ROM monitor.
+   Copyright 1995, 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+
+#include "defs.h"
+#include "gdbcore.h"
+#include "target.h"
+#include "monitor.h"
+#include "serial.h"
+#include "srec.h"
+#include "xmodem.h"
+
+#if !defined (HAVE_TERMIOS) && !defined (HAVE_TERMIO) && !defined (HAVE_SGTTY)
+#define HAVE_SGTTY
+#endif
+
+#ifdef HAVE_SGTTY
+#include <sys/ioctl.h>
+#endif
+
+#include <sys/types.h>	/* Needed by file.h on Sys V */
+#include <sys/file.h>
+#include <signal.h>
+#include <sys/stat.h>
+
+#define USE_GENERIC_LOAD
+
+int quiet = 0;	/* 1 => stifle unnecessary messages */
+serial_t mon960_serial;
+char *mon960_ttyname;   /* name of tty to talk to mon960 on, or null */
+static struct monitor_ops mon960_cmds;
+
+#ifdef USE_GENERIC_LOAD
+extern void generic_load PARAMS ((char* filename, int from_tty));
+#endif
+static void mon960_open PARAMS ((char *args, int from_tty));
+
+#ifdef USE_GENERIC_LOAD
+static void
+mon960_load_gen (filename, from_tty) 
+    char *filename;
+    int from_tty;
+{
+  extern int inferior_pid;
+  generic_load (filename, from_tty);
+  /* Finally, make the PC point at the start address */
+  if (exec_bfd)
+    write_pc (bfd_get_start_address (exec_bfd));
+
+  inferior_pid = 0;             /* No process now */
+}
+
+#else
+static void
+mon960_load (desc, file, hashmark)
+     serial_t desc;
+     char *file;
+     int hashmark;
+{
+  bfd *abfd;
+  asection *s;
+  char *buffer;
+  int i;
+
+  buffer = alloca (XMODEM_PACKETSIZE);
+  abfd = bfd_openr (file, 0);
+  if (!abfd)
+    {
+      printf_filtered ("Unable to open file %s\n", file);
+      return;
+    }
+  if (bfd_check_format (abfd, bfd_object) == 0)
+    {
+      printf_filtered ("File is not an object file\n");
+      return;
+    }
+  for (s = abfd->sections; s; s = s->next)
+    if (s->flags & SEC_LOAD)
+      {
+	bfd_size_type section_size;
+	printf_filtered ("%s\t: 0x%4x .. 0x%4x  ", s->name, s->vma,
+			 s->vma + s->_raw_size);
+	gdb_flush (gdb_stdout);
+	monitor_printf (mon960_cmds.load, s->vma);
+	if (mon960_cmds.loadresp)
+	  monitor_expect (mon960_cmds.loadresp, NULL, 0);
+	xmodem_init_xfer (desc);
+	section_size = bfd_section_size (abfd, s);
+	for (i = 0; i < section_size; i += XMODEM_DATASIZE)
+	  {
+	    int numbytes;
+	    numbytes = min (XMODEM_DATASIZE, section_size - i);
+	    bfd_get_section_contents (abfd, s, buffer + XMODEM_DATAOFFSET, i,
+				      numbytes);
+	    xmodem_send_packet (desc, buffer, numbytes, hashmark);
+	    if (hashmark)
+	      {
+		putchar_unfiltered ('#');
+		gdb_flush (gdb_stdout);
+	      }
+	  }			/* Per-packet (or S-record) loop */
+	xmodem_finish_xfer (desc);
+	monitor_expect_prompt (NULL, 0);
+	putchar_unfiltered ('\n');
+      }				/* Loadable sections */
+  if (hashmark) 
+    putchar_unfiltered ('\n');
+}
+#endif
+
+/* This array of registers need to match the indexes used by GDB.
+   This exists because the various ROM monitors use different strings
+   than does GDB, and don't necessarily support all the registers
+   either. So, typing "info reg sp" becomes a "r30".  */
+
+/* these correspond to the offsets from tm-* files from config directories */
+/* g0-g14, fp, pfp, sp, rip,r3-15, pc, ac, tc, fp0-3 */ 
+/* NOTE: "ip" is documented as "ir" in the Mon960 UG. */
+/* NOTE: "ir" can't be accessed... but there's an ip and rip. */
+static char *mon960_regnames[NUM_REGS] = {
+  /*  0 */ "pfp", "sp",  "rip", "r3",  "r4",  "r5",  "r6",  "r7", \
+  /*  8 */ "r8",  "r9",  "r10", "r11", "r12", "r13", "r14", "r15",\
+  /* 16 */ "g0",  "g1",  "g2",  "g3",  "g4",  "g5",  "g6",  "g7", \
+  /* 24 */ "g8",  "g9",  "g10", "g11", "g12", "g13", "g14", "fp", \
+  /* 32 */ "pc",  "ac",  "tc",  "ip",  "fp0", "fp1", "fp2", "fp3",\
+  };
+
+/* Define the monitor command strings. Since these are passed directly
+   through to a printf style function, we may include formatting
+   strings. We also need a CR or LF on the end.  */
+
+static struct target_ops mon960_ops;
+
+/* need to pause the monitor for timing reasons, so slow it down */
+static char *mon960_inits[] = {"\n\r\r\r\r\r\r\r\r\r\r\r\r\r\r\n\r\n\r\n", NULL}; /* Exits sub-command mode & download cmds */
+
+static struct monitor_ops mon960_cmds =
+{
+  MO_CLR_BREAK_USES_ADDR
+    | MO_NO_ECHO_ON_OPEN
+    | MO_SEND_BREAK_ON_STOP
+    | MO_GETMEM_READ_SINGLE,    /* flags */
+  mon960_inits,			/* Init strings */
+  "go\n\r",			/* continue command */
+  "st\n\r",			/* single step */
+  "\n\r",			/* break interrupts the program */
+  NULL,				/* set a breakpoint */
+				/* can't use "br" because only 2 hw bps are supported */
+  NULL,				/* clear a breakpoint - "de" is for hw bps */
+  NULL,				/* clear all breakpoints */
+  NULL,				/* fill (start end val) */
+				/* can't use "fi" because it takes words, not bytes */
+  {
+    /* can't use "mb", "md" or "mo" because they require interaction */
+    NULL,			/* setmem.cmdb (addr, value) */
+    "md %x %x\n\r",		/* setmem.cmdw (addr, value) */
+    NULL,			/* setmem.cmdl (addr, value) */
+    NULL,			/* setmem.cmdll (addr, value) */
+    NULL,			/* setmem.resp_delim */
+    NULL,			/* setmem.term */
+    NULL,			/* setmem.term_cmd */
+  },
+  {
+    /* since the parsing of multiple bytes is difficult due to
+       interspersed addresses, we'll only read 1 value at a time, 
+       even tho these can handle a count */
+    "db %x\n\r",		/* getmem.cmdb (addr, #bytes) */
+    "ds %x\n\r",		/* getmem.cmdw (addr, #swords) */
+    "di %x\n\r",		/* getmem.cmdl (addr, #words) */
+    "dd %x\n\r",		/* getmem.cmdll (addr, #dwords) */
+    " : ",			/* getmem.resp_delim */
+    NULL,			/* getmem.term */
+    NULL,			/* getmem.term_cmd */
+  },
+  {
+    "md %s %x\n\r",		/* setreg.cmd (name, value) */
+    NULL,			/* setreg.resp_delim */
+    NULL,			/* setreg.term */
+    NULL			/* setreg.term_cmd */
+  },
+  {
+    "di %s\n\r",		/* getreg.cmd (name) */
+    " : ",			/* getreg.resp_delim */
+    NULL,			/* getreg.term */
+    NULL,			/* getreg.term_cmd */
+  },
+  "re\n\r",			/* dump_registers */
+  "\\(\\w+\\)=\\([0-9a-fA-F]+\\)",	/* register_pattern */
+  NULL,				/* supply_register */
+#ifdef USE_GENERIC_LOAD
+  NULL,				/* load_routine (defaults to SRECs) */
+  NULL,				/* download command */
+  NULL,				/* load response */
+#else
+  mon960_load,			/* load_routine (defaults to SRECs) */
+  "do\n\r",			/* download command */
+  "Downloading\n\r",		/* load response */
+#endif
+  "=>",				/* monitor command prompt */
+  "\n\r",			/* end-of-command delimitor */
+  NULL,				/* optional command terminator */
+  &mon960_ops,			/* target operations */
+  SERIAL_1_STOPBITS,		/* number of stop bits */
+  mon960_regnames,		/* registers names */
+  MONITOR_OPS_MAGIC		/* magic */
+};
+
+/* invoked from monitor.c - opens the serial port */
+static void
+mon960_open (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  char *serial_port_name = args;
+  if (args) 
+    {
+      char *cursor =  serial_port_name = strsave (args);
+
+      while (*cursor && *cursor != ' ')
+ 	cursor++;
+
+      if (*cursor)
+	*cursor++ = 0;
+
+      while (*cursor == ' ')
+	cursor++;
+
+    }
+  monitor_open (serial_port_name, &mon960_cmds, from_tty);
+}
+
+
+void
+_initialize_mon960 ()
+{
+  init_monitor_ops (&mon960_ops);
+
+  mon960_ops.to_shortname = "mon960"; /* for the target command */
+  mon960_ops.to_longname = "Intel 960 rom monitor";
+#ifdef USE_GENERIC_LOAD
+  mon960_ops.to_load = mon960_load_gen; /* FIXME - should go back and try "do" */
+#endif
+  /* use SW breaks; target only supports 2 HW breakpoints */
+  mon960_ops.to_insert_breakpoint = memory_insert_breakpoint; 
+  mon960_ops.to_remove_breakpoint = memory_remove_breakpoint; 
+
+  mon960_ops.to_doc = 
+    "Debug on an Intel 960 eval board running the Mon960 rom monitor.\n"
+    "Specify the serial device it is connected to (e.g. /dev/ttya).";
+
+  mon960_ops.to_open = mon960_open;
+  add_target (&mon960_ops);
+}
+
diff --git a/gdb/monitor.h b/gdb/monitor.h
index 7fbf8cc..daad1ca 100644
--- a/gdb/monitor.h
+++ b/gdb/monitor.h
@@ -121,6 +121,10 @@ struct monitor_ops
 #define MO_GETMEM_READ_SINGLE 0x10	/* getmem can only read one loc at a time */
 #define MO_HANDLE_NL 0x20		/* handle \r\n combinations */
 
+#define MO_NO_ECHO_ON_OPEN 0x40	/* don't expect echos in monitor_open */
+
+#define MO_SEND_BREAK_ON_STOP 0x80	/* If set, send break to stop monitor */
+
 extern struct monitor_ops        *current_monitor;
 
 #define LOADTYPES		(current_monitor->loadtypes)