Cleanups after the update to Autoconf 2.64, Automake 1.11.

/:
	* README-maintainer-mode: Point directly to upstream locations
	for autoconf, automake, libtool, gettext, instead of copies on
	sources.redhat.com.  Document required versions.
	* configure.ac: Do not substitute datarootdir, htmldir,
	pdfdir, docdir.  Do not process --with-datarootdir,
	--with-htmldir, --with-pdfdir, --with-docdir.
	* configure: Regenerate.

gdb/:
	* CONTRIBUTE: Bump documented Autoconf version.
	* configure.ac: Do not substitute datarootdir, htmldir,
	pdfdir, docdir.  Do not process --with-datarootdir,
	--with-htmldir, --with-pdfdir, --with-docdir.
	* configure: Regenerate.

gdb/doc/:
	* gdbint.texinfo (Releasing GDB): Point to
	README-maintainer-mode file for required autoconf version.
	* configure.ac: Do not substitute datarootdir, htmldir,
	pdfdir, docdir.  Do not process --with-datarootdir,
	--with-htmldir, --with-pdfdir, --with-docdir.
	* configure: Regenerate.

gprof/:
	* Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
	(install-pdf-recursive, html__strip_dir, install-html)
	(install-html-am, install-html-recursive): Remove.
	* Makefile.in: Regenerate.

opcodes/:
	* Makefile.am (install-pdf, install-html): Remove.
	* Makefile.in: Regenerate.

gas/:
	* Makefile.am (install-pdf, install-pdf-recursive, install-html)
	(install-html-recursive): Remove.
	* Makefile.in: Regenerate.
	* doc/Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
	(html__strip_dir, install-html, install-html-am): Remove.
	* doc/Makefile.in: Regenerate.

ld/:
	* Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
	(install-pdf-recursive, html__strip_dir, install-html)
	(install-html-am, install-html-recursive): Remove.
	* Makefile.in: Regenerate.

binutils/:
	* Makefile.am (install-pdf, install-pdf-recursive, install-html)
	(install-html-recursive): Remove.
	* Makefile.in: Regenerate.
	* doc/Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
	(html__strip_dir, install-html, install-html-am): Remove.
	* doc/Makefile.in: Regenerate.

bfd/:
	* Makefile.am (datarootdir, docdir, htmldor, pdfdir)
	(install-pdf, install-pdf-recursive, install-html)
	(install-html-recursive): Remove.
	* Makefile.in: Regenerate.

bfd/doc/:
	* Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
	(html__strip_dir, install-html, install-html-am): Remove.
	* Makefile.in: Regenerate.

37 files changed, 269 insertions, 1155 deletions

diff --git a/ChangeLog b/ChangeLog
index f6b9504..e9e3a76 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,5 +1,13 @@
 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 
+	* README-maintainer-mode: Point directly to upstream locations
+	for autoconf, automake, libtool, gettext, instead of copies on
+	sources.redhat.com.  Document required versions.
+	* configure.ac: Do not substitute datarootdir, htmldir,
+	pdfdir, docdir.  Do not process --with-datarootdir,
+	--with-htmldir, --with-pdfdir, --with-docdir.
+	* configure: Regenerate.
+
 	* configure: Regenerate.
 
 	* compile: Sync from Automake 1.11.
diff --git a/README-maintainer-mode b/README-maintainer-mode
index 0115a1e..a350974 100644
--- a/README-maintainer-mode
+++ b/README-maintainer-mode
@@ -3,7 +3,18 @@
 
 Note that if you configure with --enable-maintainer-mode, you will need
 special versions of automake, autoconf, libtool and gettext. You will
-find the sources for these in ftp://sources.redhat.com/pub/binutils.
+find the sources for these in the respective upstream directories:
+
+  ftp://ftp.gnu.org/gnu/autoconf
+  ftp://ftp.gnu.org/gnu/automake
+  ftp://ftp.gnu.org/gnu/libtool
+  ftp://ftp.gnu.org/gnu/gettext
+
+The required versions of the tools for this tree are
+  autoconf 2.64
+  automake 1.11
+  libtool 2.2.6
+  gettext 0.14.5
 
 Note - "make distclean" does not work with maintainer mode enabled.
 The Makefiles in the some of the po/ subdirectories depend upon the
diff --git a/bfd/ChangeLog b/bfd/ChangeLog
index 086a436..2d02b20 100644
--- a/bfd/ChangeLog
+++ b/bfd/ChangeLog
@@ -1,5 +1,10 @@
 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 
+	* Makefile.am (datarootdir, docdir, htmldor, pdfdir)
+	(install-pdf, install-pdf-recursive, install-html)
+	(install-html-recursive): Remove.
+	* Makefile.in: Regenerate.
+
 	* Makefile.in: Regenerate.
 	* aclocal.m4: Likewise.
 	* config.in: Likewise.
diff --git a/bfd/Makefile.am b/bfd/Makefile.am
index 20fcf5a..2fe953a 100644
--- a/bfd/Makefile.am
+++ b/bfd/Makefile.am
@@ -16,11 +16,6 @@ bfddocdir = doc
 bfdlibdir = @bfdlibdir@
 bfdincludedir = @bfdincludedir@
 
-datarootdir = @datarootdir@
-docdir = @docdir@
-htmldir = @htmldir@
-pdfdir = @pdfdir@
-
 bfdlib_LTLIBRARIES = libbfd.la
 
 WARN_CFLAGS = @WARN_CFLAGS@
@@ -723,64 +718,6 @@ po/BLD-POTFILES.in: @MAINT@ Makefile $(BLD_POTFILES)
 
 all diststuff: info
 
-.PHONY: install-pdf install-pdf-am install-pdf-recursive
-
-install-pdf:	install-pdf-recursive
-
-install-pdf-recursive:
-	@failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-.PHONY: install-html install-html-am install-html-recursive
-
-install-html:	install-html-recursive
-
-install-html-recursive:
-	@failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
 # Various kinds of .o files to put in libbfd.a:
 # BFD_BACKENDS	Routines the configured targets need.
 # BFD_MACHINES	Architecture-specific routines the configured targets need.
diff --git a/bfd/Makefile.in b/bfd/Makefile.in
index 7c7335d..30a4462 100644
--- a/bfd/Makefile.in
+++ b/bfd/Makefile.in
@@ -1328,6 +1328,8 @@ install-dvi-am:
 
 install-exec-am:
 
+install-html: install-html-recursive
+
 install-html-am:
 
 install-info: install-info-recursive
@@ -1336,6 +1338,8 @@ install-info-am:
 
 install-man:
 
+install-pdf: install-pdf-recursive
+
 install-pdf-am:
 
 install-ps: install-ps-recursive
@@ -1398,64 +1402,6 @@ po/BLD-POTFILES.in: @MAINT@ Makefile $(BLD_POTFILES)
 
 all diststuff: info
 
-.PHONY: install-pdf install-pdf-am install-pdf-recursive
-
-install-pdf:	install-pdf-recursive
-
-install-pdf-recursive:
-	@failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-.PHONY: install-html install-html-am install-html-recursive
-
-install-html:	install-html-recursive
-
-install-html-recursive:
-	@failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
 stamp-ofiles: Makefile
 	rm -f tofiles
 	f=""; \
diff --git a/bfd/doc/ChangeLog b/bfd/doc/ChangeLog
index 2a36ecb..5df2aba 100644
--- a/bfd/doc/ChangeLog
+++ b/bfd/doc/ChangeLog
@@ -1,5 +1,9 @@
 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 
+	* Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
+	(html__strip_dir, install-html, install-html-am): Remove.
+	* Makefile.in: Regenerate.
+
 	* Makefile.in: Regenerate.
 
 2009-05-22  Alan Modra  <amodra@bigpond.net.au>
diff --git a/bfd/doc/Makefile.am b/bfd/doc/Makefile.am
index d5b3fba..2a10fc0 100644
--- a/bfd/doc/Makefile.am
+++ b/bfd/doc/Makefile.am
@@ -296,41 +296,6 @@ MAINTAINERCLEANFILES = $(DOCFILES)
 # cygnus option.
 install: install-info
 
-pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-
-install-pdf: install-pdf-am
- 
-install-pdf-am: $(PDFS)
-	@$(NORMAL_INSTALL)
-	test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
-	@list='$(PDFS)'; for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(pdf__strip_dir) \
-	  echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
-	  $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
-	done
-
-html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-
-install-html: install-html-am
-
-install-html-am: $(HTMLS)
-	@$(NORMAL_INSTALL)
-	test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
-	@list='$(HTMLS)'; for p in $$list; do \
-	  if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
-	  f=$(html__strip_dir) \
-	  if test -d "$$d$$p"; then \
-	    echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
-	    echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
-	  else \
-	    echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
-	  fi; \
-	done
-
 MAINTAINERCLEANFILES += bfd.info
 
 # Automake 1.9 will only build info files in the objdir if they are
diff --git a/bfd/doc/Makefile.in b/bfd/doc/Makefile.in
index 73b1110..87346e2 100644
--- a/bfd/doc/Makefile.in
+++ b/bfd/doc/Makefile.in
@@ -376,8 +376,6 @@ CLEANFILES = *.p *.ip
 DISTCLEANFILES = bfd.?? bfd.??? bfd.h libbfd.h libcoff.h texput.log \
 	$(am__append_1)
 MAINTAINERCLEANFILES = $(DOCFILES) bfd.info
-pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
 all: all-am
 
 .SUFFIXES:
@@ -634,6 +632,29 @@ install-dvi-am: $(DVIS)
 	done
 install-exec-am:
 
+install-html: install-html-am
+
+install-html-am: $(HTMLS)
+	@$(NORMAL_INSTALL)
+	test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
+	@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  $(am__strip_dir) \
+	  if test -d "$$d$$p"; then \
+	    echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
+	    $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
+	    echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
+	    $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
+	  else \
+	    list2="$$list2 $$d$$p"; \
+	  fi; \
+	done; \
+	test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
+	done; }
 install-info: install-info-am
 
 install-info-am: $(INFO_DEPS)
@@ -669,6 +690,19 @@ install-info-am: $(INFO_DEPS)
 	else : ; fi
 install-man:
 
+install-pdf: install-pdf-am
+
+install-pdf-am: $(PDFS)
+	@$(NORMAL_INSTALL)
+	test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
+	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
 install-ps: install-ps-am
 
 install-ps-am: $(PSS)
@@ -904,37 +938,6 @@ bfdver.texi: $(srcdir)/Makefile.in
 # cygnus option.
 install: install-info
 
-install-pdf: install-pdf-am
-
-install-pdf-am: $(PDFS)
-	@$(NORMAL_INSTALL)
-	test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
-	@list='$(PDFS)'; for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(pdf__strip_dir) \
-	  echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
-	  $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
-	done
-
-install-html: install-html-am
-
-install-html-am: $(HTMLS)
-	@$(NORMAL_INSTALL)
-	test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
-	@list='$(HTMLS)'; for p in $$list; do \
-	  if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
-	  f=$(html__strip_dir) \
-	  if test -d "$$d$$p"; then \
-	    echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
-	    echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
-	  else \
-	    echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
-	  fi; \
-	done
-
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/binutils/ChangeLog b/binutils/ChangeLog
index 17bc23c..d5cadb8 100644
--- a/binutils/ChangeLog
+++ b/binutils/ChangeLog
@@ -1,5 +1,12 @@
 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 
+	* Makefile.am (install-pdf, install-pdf-recursive, install-html)
+	(install-html-recursive): Remove.
+	* Makefile.in: Regenerate.
+	* doc/Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
+	(html__strip_dir, install-html, install-html-am): Remove.
+	* doc/Makefile.in: Regenerate.
+
 	* Makefile.in: Regenerate.
 	* aclocal.m4: Likewise.
 	* config.in: Likewise.
diff --git a/binutils/Makefile.am b/binutils/Makefile.am
index 636140d..2d38715 100644
--- a/binutils/Makefile.am
+++ b/binutils/Makefile.am
@@ -116,64 +116,6 @@ OPCODES = ../opcodes/libopcodes.la
 
 LIBIBERTY = ../libiberty/libiberty.a
 
-.PHONY: install-pdf install-pdf-am install-pdf-recursive
-
-install-pdf:	install-pdf-recursive
-
-install-pdf-recursive:
-	@failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-.PHONY: install-html install-html-am install-html-recursive
-
-install-html:	install-html-recursive
-
-install-html-recursive:
-	@failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
 POTFILES = $(CFILES) $(DEBUG_SRCS) $(HFILES)
 po/POTFILES.in: @MAINT@ Makefile
 	for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \
diff --git a/binutils/Makefile.in b/binutils/Makefile.in
index aaec523..9d80d22 100644
--- a/binutils/Makefile.in
+++ b/binutils/Makefile.in
@@ -972,6 +972,8 @@ install-dvi-am:
 
 install-exec-am: install-binPROGRAMS install-exec-local
 
+install-html: install-html-recursive
+
 install-html-am:
 
 install-info: install-info-recursive
@@ -980,6 +982,8 @@ install-info-am:
 
 install-man:
 
+install-pdf: install-pdf-recursive
+
 install-pdf-am:
 
 install-ps: install-ps-recursive
@@ -1029,64 +1033,6 @@ uninstall-am: uninstall-binPROGRAMS
 	mostlyclean-libtool mostlyclean-local pdf pdf-am ps ps-am tags \
 	tags-recursive uninstall uninstall-am uninstall-binPROGRAMS
 
-
-.PHONY: install-pdf install-pdf-am install-pdf-recursive
-
-install-pdf:	install-pdf-recursive
-
-install-pdf-recursive:
-	@failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-.PHONY: install-html install-html-am install-html-recursive
-
-install-html:	install-html-recursive
-
-install-html-recursive:
-	@failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
 po/POTFILES.in: @MAINT@ Makefile
 	for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \
 	  && mv tmp $(srcdir)/po/POTFILES.in
diff --git a/binutils/doc/Makefile.am b/binutils/doc/Makefile.am
index 71aa192..bdd470d 100644
--- a/binutils/doc/Makefile.am
+++ b/binutils/doc/Makefile.am
@@ -161,41 +161,6 @@ $(DEMANGLER_NAME).1: cxxfilt.man Makefile
 # cygnus option.
 install-data-local: install-info
 
-pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-
-install-pdf: install-pdf-am
- 
-install-pdf-am: $(PDFS)
-	@$(NORMAL_INSTALL)
-	test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
-	@list='$(PDFS)'; for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(pdf__strip_dir) \
-	  echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
-	  $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
-	done
-
-html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-
-install-html: install-html-am
-
-install-html-am: $(HTMLS)
-	@$(NORMAL_INSTALL)
-	test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
-	@list='$(HTMLS)'; for p in $$list; do \
-	  if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
-	  f=$(html__strip_dir) \
-	  if test -d "$$d$$p"; then \
-	    echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
-	    echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
-	  else \
-	    echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
-	  fi; \
-	done
-
 MAINTAINERCLEANFILES = binutils.info
 
 # Automake 1.9 will only build info files in the objdir if they are
diff --git a/binutils/doc/Makefile.in b/binutils/doc/Makefile.in
index 4351b67..f2d63c8 100644
--- a/binutils/doc/Makefile.in
+++ b/binutils/doc/Makefile.in
@@ -297,8 +297,6 @@ TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
 		    -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc
 
 MOSTLYCLEANFILES = $(DEMANGLER_NAME).1
-pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
 MAINTAINERCLEANFILES = binutils.info
 
 # Automake 1.9 will only build info files in the objdir if they are
@@ -604,6 +602,29 @@ install-dvi-am: $(DVIS)
 	done
 install-exec-am:
 
+install-html: install-html-am
+
+install-html-am: $(HTMLS)
+	@$(NORMAL_INSTALL)
+	test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
+	@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  $(am__strip_dir) \
+	  if test -d "$$d$$p"; then \
+	    echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
+	    $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
+	    echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
+	    $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
+	  else \
+	    list2="$$list2 $$d$$p"; \
+	  fi; \
+	done; \
+	test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
+	done; }
 install-info: install-info-am
 
 install-info-am: $(INFO_DEPS)
@@ -639,6 +660,19 @@ install-info-am: $(INFO_DEPS)
 	else : ; fi
 install-man: install-man1
 
+install-pdf: install-pdf-am
+
+install-pdf-am: $(PDFS)
+	@$(NORMAL_INSTALL)
+	test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
+	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
 install-ps: install-ps-am
 
 install-ps-am: $(PSS)
@@ -815,37 +849,6 @@ $(DEMANGLER_NAME).1: cxxfilt.man Makefile
 # cygnus option.
 install-data-local: install-info
 
-install-pdf: install-pdf-am
-
-install-pdf-am: $(PDFS)
-	@$(NORMAL_INSTALL)
-	test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
-	@list='$(PDFS)'; for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(pdf__strip_dir) \
-	  echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
-	  $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
-	done
-
-install-html: install-html-am
-
-install-html-am: $(HTMLS)
-	@$(NORMAL_INSTALL)
-	test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
-	@list='$(HTMLS)'; for p in $$list; do \
-	  if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
-	  f=$(html__strip_dir) \
-	  if test -d "$$d$$p"; then \
-	    echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
-	    echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
-	  else \
-	    echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
-	  fi; \
-	done
-
 # Maintenance
 
 # We need it for the taz target in ../../Makefile.in.
diff --git a/configure b/configure
index 715915c..0d14971 100755
--- a/configure
+++ b/configure
@@ -770,10 +770,6 @@ with_build_time_tools
 enable_maintainer_mode
 enable_stage1_checking
 enable_werror
-with_datarootdir
-with_docdir
-with_pdfdir
-with_htmldir
 '
       ac_precious_vars='build_alias
 host_alias
@@ -1500,10 +1496,6 @@ Optional Packages:
                              map A to B, C to D ... in debug information
   --with-build-time-tools=PATH
                           use given path to find target tools during the build
-  --with-datarootdir      use datarootdir as the data root directory.
-  --with-docdir           install documentation in this directory.
-  --with-pdfdir           install pdf in this directory.
-  --with-htmldir          install html in this directory.
 
 Some influential environment variables:
   CC          C compiler command
@@ -13187,48 +13179,6 @@ case ${enable_werror} in
 esac
 
 
-# Flags needed to enable html installing and building
-
-# Check whether --with-datarootdir was given.
-if test "${with_datarootdir+set}" = set; then :
-  withval=$with_datarootdir; datarootdir="\${prefix}/${withval}"
-else
-  datarootdir="\${prefix}/share"
-fi
-
-
-
-# Check whether --with-docdir was given.
-if test "${with_docdir+set}" = set; then :
-  withval=$with_docdir; docdir="\${prefix}/${withval}"
-else
-  docdir="\${datarootdir}/doc"
-fi
-
-
-
-# Check whether --with-pdfdir was given.
-if test "${with_pdfdir+set}" = set; then :
-  withval=$with_pdfdir; pdfdir="\${prefix}/${withval}"
-else
-  pdfdir="\${docdir}"
-fi
-
-
-
-# Check whether --with-htmldir was given.
-if test "${with_htmldir+set}" = set; then :
-  withval=$with_htmldir; htmldir="\${prefix}/${withval}"
-else
-  htmldir="\${docdir}"
-fi
-
-
-
-
-
-
-
 # Specify what files to not compare during bootstrap.
 
 compare_exclusions="gcc/cc*-checksum\$(objext) | gcc/ada/*tools/*"
diff --git a/configure.ac b/configure.ac
index 9da0048..ad2c86a 100644
--- a/configure.ac
+++ b/configure.ac
@@ -3120,32 +3120,6 @@ case ${enable_werror} in
 esac
 AC_SUBST(stage2_werror_flag)
 
-# Flags needed to enable html installing and building
-AC_ARG_WITH(datarootdir,
-[  --with-datarootdir      use datarootdir as the data root directory.],
-[datarootdir="\${prefix}/${withval}"],
-[datarootdir="\${prefix}/share"])
-
-AC_ARG_WITH(docdir,
-[  --with-docdir           install documentation in this directory.],
-[docdir="\${prefix}/${withval}"],
-[docdir="\${datarootdir}/doc"])
-
-AC_ARG_WITH(pdfdir,
-[  --with-pdfdir           install pdf in this directory.],
-[pdfdir="\${prefix}/${withval}"],
-[pdfdir="\${docdir}"])
-
-AC_ARG_WITH(htmldir,
-[  --with-htmldir          install html in this directory.],
-[htmldir="\${prefix}/${withval}"],
-[htmldir="\${docdir}"])
-
-AC_SUBST(datarootdir)
-AC_SUBST(docdir)
-AC_SUBST(pdfdir)
-AC_SUBST(htmldir)
-
 # Specify what files to not compare during bootstrap.
 
 compare_exclusions="gcc/cc*-checksum\$(objext) | gcc/ada/*tools/*"
diff --git a/gas/ChangeLog b/gas/ChangeLog
index 3d2d92d..b5e3ff5 100644
--- a/gas/ChangeLog
+++ b/gas/ChangeLog
@@ -1,5 +1,12 @@
 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 
+	* Makefile.am (install-pdf, install-pdf-recursive, install-html)
+	(install-html-recursive): Remove.
+	* Makefile.in: Regenerate.
+	* doc/Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
+	(html__strip_dir, install-html, install-html-am): Remove.
+	* doc/Makefile.in: Regenerate.
+
 	* Makefile.in: Regenerate.
 	* aclocal.m4: Likewise.
 	* config.in: Likewise.
diff --git a/gas/Makefile.am b/gas/Makefile.am
index 39cea06..a7f547c 100644
--- a/gas/Makefile.am
+++ b/gas/Makefile.am
@@ -728,64 +728,6 @@ MOSTLYCLEANFILES = $(STAGESTUFF) core \
 
 CLEANFILES = dep.sed DEPTC DEPTCA DEPOBJ DEPOBJA DEP2 DEP2A DEP1 DEPA DEP DEPDIR
 
-.PHONY: install-pdf install-pdf-am install-pdf-recursive
-
-install-pdf:	install-pdf-recursive
-
-install-pdf-recursive:
-	@failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-.PHONY: install-html install-html-am install-html-recursive
-
-install-html:	install-html-recursive
-
-install-html-recursive:
-	@failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
 .PHONY: install-exec-local install-data-local
 .PHONY: install-exec-bindir install-exec-tooldir
 
diff --git a/gas/Makefile.in b/gas/Makefile.in
index 0f677e5..30876f9 100644
--- a/gas/Makefile.in
+++ b/gas/Makefile.in
@@ -4825,6 +4825,8 @@ install-dvi-am:
 
 install-exec-am: install-exec-local
 
+install-html: install-html-recursive
+
 install-html-am:
 
 install-info: install-info-recursive
@@ -4833,6 +4835,8 @@ install-info-am:
 
 install-man:
 
+install-pdf: install-pdf-recursive
+
 install-pdf-am:
 
 install-ps: install-ps-recursive
@@ -5046,64 +5050,6 @@ cgen.o: cgen.c cgen.h cgen-desc.h subsegs.h \
 	$(srcdir)/../opcodes/$(CGEN_CPU_PREFIX)-desc.h \
 	$(srcdir)/../opcodes/$(CGEN_CPU_PREFIX)-opc.h
 
-.PHONY: install-pdf install-pdf-am install-pdf-recursive
-
-install-pdf:	install-pdf-recursive
-
-install-pdf-recursive:
-	@failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-.PHONY: install-html install-html-am install-html-recursive
-
-install-html:	install-html-recursive
-
-install-html-recursive:
-	@failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
 .PHONY: install-exec-local install-data-local
 .PHONY: install-exec-bindir install-exec-tooldir
 
diff --git a/gas/doc/Makefile.am b/gas/doc/Makefile.am
index 1a91757..e00243c 100644
--- a/gas/doc/Makefile.am
+++ b/gas/doc/Makefile.am
@@ -74,41 +74,6 @@ CPU_DOCS = \
 # cygnus option.
 install-data-local: install-info
 
-pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-
-install-pdf: install-pdf-am
-
-install-pdf-am: $(PDFS)
-	@$(NORMAL_INSTALL)
-	test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
-	@list='$(PDFS)'; for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(pdf__strip_dir) \
-	  echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
-	  $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
-	done
-
-html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-
-install-html: install-html-am
-
-install-html-am: $(HTMLS)
-	@$(NORMAL_INSTALL)
-	test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
-	@list='$(HTMLS)'; for p in $$list; do \
-	  if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
-	  f=$(html__strip_dir) \
-	  if test -d "$$d$$p"; then \
-	    echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
-	    echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
-	  else \
-	    echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
-	  fi; \
-	done
-
 # This one isn't ready for prime time yet.  Not even a little bit.
 
 noinst_TEXINFOS = internals.texi
diff --git a/gas/doc/Makefile.in b/gas/doc/Makefile.in
index b37040d..74e3c91 100644
--- a/gas/doc/Makefile.in
+++ b/gas/doc/Makefile.in
@@ -308,8 +308,6 @@ CPU_DOCS = \
 	c-z80.texi \
 	c-z8k.texi
 
-pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
 
 # This one isn't ready for prime time yet.  Not even a little bit.
 noinst_TEXINFOS = internals.texi
@@ -618,6 +616,29 @@ install-dvi-am: $(DVIS)
 	done
 install-exec-am:
 
+install-html: install-html-am
+
+install-html-am: $(HTMLS)
+	@$(NORMAL_INSTALL)
+	test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
+	@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  $(am__strip_dir) \
+	  if test -d "$$d$$p"; then \
+	    echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
+	    $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
+	    echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
+	    $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
+	  else \
+	    list2="$$list2 $$d$$p"; \
+	  fi; \
+	done; \
+	test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
+	done; }
 install-info: install-info-am
 
 install-info-am: $(INFO_DEPS)
@@ -653,6 +674,19 @@ install-info-am: $(INFO_DEPS)
 	else : ; fi
 install-man: install-man1
 
+install-pdf: install-pdf-am
+
+install-pdf-am: $(PDFS)
+	@$(NORMAL_INSTALL)
+	test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
+	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
 install-ps: install-ps-am
 
 install-ps-am: $(PSS)
@@ -718,37 +752,6 @@ asconfig.texi: $(CONFIG).texi
 # cygnus option.
 install-data-local: install-info
 
-install-pdf: install-pdf-am
-
-install-pdf-am: $(PDFS)
-	@$(NORMAL_INSTALL)
-	test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
-	@list='$(PDFS)'; for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(pdf__strip_dir) \
-	  echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
-	  $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
-	done
-
-install-html: install-html-am
-
-install-html-am: $(HTMLS)
-	@$(NORMAL_INSTALL)
-	test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
-	@list='$(HTMLS)'; for p in $$list; do \
-	  if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
-	  f=$(html__strip_dir) \
-	  if test -d "$$d$$p"; then \
-	    echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
-	    echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
-	  else \
-	    echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
-	  fi; \
-	done
-
 # Maintenance
 
 # We need it for the taz target in ../../Makefile.in.
diff --git a/gdb/CONTRIBUTE b/gdb/CONTRIBUTE
index 75b6ddf..2d24bba 100644
--- a/gdb/CONTRIBUTE
+++ b/gdb/CONTRIBUTE
@@ -121,7 +121,7 @@ o	If ``gdb/configure.ac'' is modified then you don't
 	``configure''.
 
 	The maintainer will re-generate those files
-	using autoconf (2.59 as of 2005-01-07).
+	using autoconf (2.64 as of 2009-08-22).
 
 
 o	If ``gdb/gdbarch.sh'' is modified, you don't
diff --git a/gdb/ChangeLog b/gdb/ChangeLog
index 7b50f45..3901f18 100644
--- a/gdb/ChangeLog
+++ b/gdb/ChangeLog
@@ -1,5 +1,11 @@
 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 
+	* CONTRIBUTE: Bump documented Autoconf version.
+	* configure.ac: Do not substitute datarootdir, htmldir,
+	pdfdir, docdir.  Do not process --with-datarootdir,
+	--with-htmldir, --with-pdfdir, --with-docdir.
+	* configure: Regenerate.
+
 	* aclocal.m4: Regenerate.
 	* config.in: Likewise.
 	* configure: Likewise.
diff --git a/gdb/configure b/gdb/configure
index fa0861c..2691e33 100755
--- a/gdb/configure
+++ b/gdb/configure
@@ -912,10 +912,6 @@ with_tk
 with_x
 enable_sim
 enable_multi_ice
-with_datarootdir
-with_docdir
-with_pdfdir
-with_htmldir
 '
       ac_precious_vars='build_alias
 host_alias
@@ -1608,10 +1604,6 @@ Optional Packages:
   --with-tcl              directory containing tcl configuration (tclConfig.sh)
   --with-tk               directory containing tk configuration (tkConfig.sh)
   --with-x                use the X Window System
-  --with-datarootdir      use datarootdir as the data root directory.
-  --with-docdir           install documentation in this directory.
-  --with-pdfdir           install pdf in this directory.
-  --with-htmldir          install html in this directory.
 
 Some influential environment variables:
   CC          C compiler command
@@ -14164,48 +14156,6 @@ ac_config_links="$ac_config_links $ac_config_links_1"
 $as_echo "#define GDB_DEFAULT_HOST_CHARSET \"UTF-8\"" >>confdefs.h
 
 
-# Flags needed to enable html installing and building
-
-# Check whether --with-datarootdir was given.
-if test "${with_datarootdir+set}" = set; then :
-  withval=$with_datarootdir; datarootdir="\${prefix}/${withval}"
-else
-  datarootdir="\${prefix}/share"
-fi
-
-
-
-# Check whether --with-docdir was given.
-if test "${with_docdir+set}" = set; then :
-  withval=$with_docdir; docdir="\${prefix}/${withval}"
-else
-  docdir="\${datarootdir}/doc"
-fi
-
-
-
-# Check whether --with-pdfdir was given.
-if test "${with_pdfdir+set}" = set; then :
-  withval=$with_pdfdir; pdfdir="\${prefix}/${withval}"
-else
-  pdfdir="\${docdir}"
-fi
-
-
-
-# Check whether --with-htmldir was given.
-if test "${with_htmldir+set}" = set; then :
-  withval=$with_htmldir; htmldir="\${prefix}/${withval}"
-else
-  htmldir="\${docdir}"
-fi
-
-
-
-
-
-
-
 ac_config_files="$ac_config_files Makefile .gdbinit:gdbinit.in gnulib/Makefile"
 
 ac_config_commands="$ac_config_commands default"
diff --git a/gdb/configure.ac b/gdb/configure.ac
index 9dc736c..aa0bf75 100644
--- a/gdb/configure.ac
+++ b/gdb/configure.ac
@@ -1917,32 +1917,6 @@ dnl  At the moment, we just assume it's UTF-8.
 AC_DEFINE(GDB_DEFAULT_HOST_CHARSET, "UTF-8",
           [Define to be a string naming the default host character set.])
 
-# Flags needed to enable html installing and building
-AC_ARG_WITH(datarootdir,
-AC_HELP_STRING([--with-datarootdir], [use datarootdir as the data root directory.]),
-[datarootdir="\${prefix}/${withval}"],
-[datarootdir="\${prefix}/share"])
-
-AC_ARG_WITH(docdir,
-AC_HELP_STRING([--with-docdir], [install documentation in this directory.]),
-[docdir="\${prefix}/${withval}"],
-[docdir="\${datarootdir}/doc"])
-
-AC_ARG_WITH(pdfdir,
-AC_HELP_STRING([--with-pdfdir], [install pdf in this directory.]),
-[pdfdir="\${prefix}/${withval}"],
-[pdfdir="\${docdir}"])
-
-AC_ARG_WITH(htmldir,
-AC_HELP_STRING([--with-htmldir], [install html in this directory.]),
-[htmldir="\${prefix}/${withval}"],
-[htmldir="\${docdir}"])
-
-AC_SUBST(datarootdir)
-AC_SUBST(docdir)
-AC_SUBST(htmldir)
-AC_SUBST(pdfdir)
-
 AC_OUTPUT(Makefile .gdbinit:gdbinit.in gnulib/Makefile,
 [
 case x$CONFIG_HEADERS in
diff --git a/gdb/doc/ChangeLog b/gdb/doc/ChangeLog
index eeed9cf..865967e 100644
--- a/gdb/doc/ChangeLog
+++ b/gdb/doc/ChangeLog
@@ -1,5 +1,12 @@
 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 
+	* gdbint.texinfo (Releasing GDB): Point to
+	README-maintainer-mode file for required autoconf version.
+	* configure.ac: Do not substitute datarootdir, htmldir,
+	pdfdir, docdir.  Do not process --with-datarootdir,
+	--with-htmldir, --with-pdfdir, --with-docdir.
+	* configure: Regenerate.
+
 	* configure: Regenerate.
 
 2009-08-20  Reid Kleckner  <reid@kleckner.net>
diff --git a/gdb/doc/configure b/gdb/doc/configure
index f89c140..7dc008d 100755
--- a/gdb/doc/configure
+++ b/gdb/doc/configure
@@ -601,10 +601,6 @@ SHELL'
 ac_subst_files=''
 ac_user_opts='
 enable_option_checking
-with_datarootdir
-with_docdir
-with_pdfdir
-with_htmldir
 with_pkgversion
 with_bugurl
 '
@@ -1218,10 +1214,6 @@ if test -n "$ac_init_help"; then
 Optional Packages:
   --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
   --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --with-datarootdir      use datarootdir as the data root directory.
-  --with-docdir           install documentation in this directory.
-  --with-pdfdir           install pdf in this directory.
-  --with-htmldir          install html in this directory.
   --with-pkgversion=PKG   Use PKG in the version string in place of "GDB"
   --with-bugurl=URL       Direct users to URL to report a bug
 
@@ -1884,48 +1876,6 @@ $as_echo "no, using $LN_S" >&6; }
 fi
 
 
-# Flags needed to enable html installing and building
-
-# Check whether --with-datarootdir was given.
-if test "${with_datarootdir+set}" = set; then :
-  withval=$with_datarootdir; datarootdir="\${prefix}/${withval}"
-else
-  datarootdir="\${prefix}/share"
-fi
-
-
-
-# Check whether --with-docdir was given.
-if test "${with_docdir+set}" = set; then :
-  withval=$with_docdir; docdir="\${prefix}/${withval}"
-else
-  docdir="\${datarootdir}/doc"
-fi
-
-
-
-# Check whether --with-pdfdir was given.
-if test "${with_pdfdir+set}" = set; then :
-  withval=$with_pdfdir; pdfdir="\${prefix}/${withval}"
-else
-  pdfdir="\${docdir}"
-fi
-
-
-
-# Check whether --with-htmldir was given.
-if test "${with_htmldir+set}" = set; then :
-  withval=$with_htmldir; htmldir="\${prefix}/${withval}"
-else
-  htmldir="\${docdir}"
-fi
-
-
-
-
-
-
-
 
 
 # Check whether --with-pkgversion was given.
diff --git a/gdb/doc/configure.ac b/gdb/doc/configure.ac
index b7a2b48..3baea74 100644
--- a/gdb/doc/configure.ac
+++ b/gdb/doc/configure.ac
@@ -4,32 +4,6 @@ sinclude(../../config/acx.m4)
 AC_PROG_INSTALL
 AC_PROG_LN_S
 
-# Flags needed to enable html installing and building
-AC_ARG_WITH(datarootdir,
-AC_HELP_STRING([--with-datarootdir], [use datarootdir as the data root directory.]),
-[datarootdir="\${prefix}/${withval}"],
-[datarootdir="\${prefix}/share"])
-
-AC_ARG_WITH(docdir,
-AC_HELP_STRING([--with-docdir], [install documentation in this directory.]),
-[docdir="\${prefix}/${withval}"],
-[docdir="\${datarootdir}/doc"])
-
-AC_ARG_WITH(pdfdir,
-AC_HELP_STRING([--with-pdfdir], [install pdf in this directory.]),
-[pdfdir="\${prefix}/${withval}"],
-[pdfdir="\${docdir}"])
-
-AC_ARG_WITH(htmldir,
-AC_HELP_STRING([--with-htmldir], [install html in this directory.]),
-[htmldir="\${prefix}/${withval}"],
-[htmldir="\${docdir}"])
-
-AC_SUBST(datarootdir)
-AC_SUBST(docdir)
-AC_SUBST(htmldir)
-AC_SUBST(pdfdir)
-
 ACX_PKGVERSION([GDB])
 ACX_BUGURL([http://www.gnu.org/software/gdb/bugs/])
 AC_OUTPUT(Makefile)
diff --git a/gdb/doc/gdbint.texinfo b/gdb/doc/gdbint.texinfo
index b1c0452..6d0a226 100644
--- a/gdb/doc/gdbint.texinfo
+++ b/gdb/doc/gdbint.texinfo
@@ -7078,10 +7078,9 @@ Notes:
 @itemize @bullet
 @item
 Check the @code{autoconf} version carefully.  You want to be using the
-version taken from the @file{binutils} snapshot directory, which can be
-found at @uref{ftp://sourceware.org/pub/binutils/}.  It is very
-unlikely that a system installed version of @code{autoconf} (e.g.,
-@file{/usr/bin/autoconf}) is correct.
+version documented in the toplevel @file{README-maintainer-mode} file.
+It is very unlikely that a system installed version of @code{autoconf}
+(e.g., @file{/usr/bin/autoconf}) is correct.
 @end itemize
 
 @subsubheading Check out the relevant modules:
diff --git a/gprof/ChangeLog b/gprof/ChangeLog
index a7e2dee..05f5e0a 100644
--- a/gprof/ChangeLog
+++ b/gprof/ChangeLog
@@ -1,5 +1,10 @@
 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 
+	* Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
+	(install-pdf-recursive, html__strip_dir, install-html)
+	(install-html-am, install-html-recursive): Remove.
+	* Makefile.in: Regenerate.
+
 	* Makefile.in: Regenerate.
 	* aclocal.m4: Likewise.
 	* configure: Likewise.
diff --git a/gprof/Makefile.am b/gprof/Makefile.am
index 12d794b..6c73106 100644
--- a/gprof/Makefile.am
+++ b/gprof/Makefile.am
@@ -83,95 +83,6 @@ gprof.1: $(srcdir)/gprof.texi config.texi
 	       (rm -f $@.T$$$$ && exit 1)
 	rm -f gprof.pod
 
-.PHONY: install-pdf install-pdf-am install-pdf-recursive
-
-pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-
-install-pdf: install-pdf-recursive install-pdf-am
- 
-install-pdf-am: $(PDFS)
-	@$(NORMAL_INSTALL)
-	test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
-	@list='$(PDFS)'; for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(pdf__strip_dir) \
-	  echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
-	  $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
-	done
-
-install-pdf-recursive:
-	@failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-.PHONY: install-html install-html-am install-html-recursive
-
-html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-
-install-html: install-html-recursive  install-html-am
-
-install-html-am: $(HTMLS)
-	@$(NORMAL_INSTALL)
-	test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
-	@list='$(HTMLS)'; for p in $$list; do \
-	  if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
-	  f=$(html__strip_dir) \
-	  if test -d "$$d$$p"; then \
-	    echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
-	    echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
-	  else \
-	    echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
-	  fi; \
-	done
-
-install-html-recursive:
-	@failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
 # We want install to imply install-info as per GNU standards, despite the
 # cygnus option.
 install-data-local: install-info
diff --git a/gprof/Makefile.in b/gprof/Makefile.in
index ba684bf..f91ee0c 100644
--- a/gprof/Makefile.in
+++ b/gprof/Makefile.in
@@ -310,8 +310,6 @@ gprof_TEXINFOS = config.texi
 man_MANS = gprof.1
 AM_MAKEINFOFLAGS = -I "$(srcdir)" -I "$(top_srcdir)/../bfd/doc" -I ../bfd/doc
 TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../bfd/doc" -I ../bfd/doc
-pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
 CLEANFILES = dep.sed DEP DEPA DEP1 DEP2
 MAINTAINERCLEANFILES = gprof.info
 
@@ -841,6 +839,29 @@ install-dvi-am: $(DVIS)
 	done
 install-exec-am: install-binPROGRAMS
 
+install-html: install-html-recursive
+
+install-html-am: $(HTMLS)
+	@$(NORMAL_INSTALL)
+	test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
+	@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  $(am__strip_dir) \
+	  if test -d "$$d$$p"; then \
+	    echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
+	    $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
+	    echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
+	    $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
+	  else \
+	    list2="$$list2 $$d$$p"; \
+	  fi; \
+	done; \
+	test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
+	done; }
 install-info: install-info-recursive
 
 install-info-am: $(INFO_DEPS)
@@ -876,6 +897,19 @@ install-info-am: $(INFO_DEPS)
 	else : ; fi
 install-man: install-man1
 
+install-pdf: install-pdf-recursive
+
+install-pdf-am: $(PDFS)
+	@$(NORMAL_INSTALL)
+	test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
+	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
 install-ps: install-ps-recursive
 
 install-ps-am: $(PSS)
@@ -970,91 +1004,6 @@ gprof.1: $(srcdir)/gprof.texi config.texi
 	       (rm -f $@.T$$$$ && exit 1)
 	rm -f gprof.pod
 
-.PHONY: install-pdf install-pdf-am install-pdf-recursive
-
-install-pdf: install-pdf-recursive install-pdf-am
-
-install-pdf-am: $(PDFS)
-	@$(NORMAL_INSTALL)
-	test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
-	@list='$(PDFS)'; for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(pdf__strip_dir) \
-	  echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
-	  $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
-	done
-
-install-pdf-recursive:
-	@failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-.PHONY: install-html install-html-am install-html-recursive
-
-install-html: install-html-recursive  install-html-am
-
-install-html-am: $(HTMLS)
-	@$(NORMAL_INSTALL)
-	test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
-	@list='$(HTMLS)'; for p in $$list; do \
-	  if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
-	  f=$(html__strip_dir) \
-	  if test -d "$$d$$p"; then \
-	    echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
-	    echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
-	  else \
-	    echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
-	  fi; \
-	done
-
-install-html-recursive:
-	@failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
 # We want install to imply install-info as per GNU standards, despite the
 # cygnus option.
 install-data-local: install-info
diff --git a/ld/ChangeLog b/ld/ChangeLog
index 1defb38..9ee5895 100644
--- a/ld/ChangeLog
+++ b/ld/ChangeLog
@@ -1,5 +1,10 @@
 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 
+	* Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
+	(install-pdf-recursive, html__strip_dir, install-html)
+	(install-html-am, install-html-recursive): Remove.
+	* Makefile.in: Regenerate.
+
 	* Makefile.in: Regenerate.
 	* aclocal.m4: Likewise.
 	* config.in: Likewise.
diff --git a/ld/Makefile.am b/ld/Makefile.am
index 785966d..fc4a47e 100644
--- a/ld/Makefile.am
+++ b/ld/Makefile.am
@@ -1880,95 +1880,6 @@ mostlyclean-local:
 	-rm -rf tmpdir
 CLEANFILES = dep.sed DEP DEPA DEP1 DEP2 spu_ovl.s spu_ovl.o spu_icache.s spu_icache.o
 
-.PHONY: install-pdf install-pdf-am install-pdf-recursive
-
-pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-
-install-pdf: install-pdf-recursive install-pdf-am
- 
-install-pdf-am: $(PDFS)
-	@$(NORMAL_INSTALL)
-	test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
-	@list='$(PDFS)'; for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(pdf__strip_dir) \
-	  echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
-	  $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
-	done
-
-install-pdf-recursive:
-	@failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-.PHONY: install-html install-html-am install-html-recursive
-
-html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-
-install-html: install-html-recursive  install-html-am
-
-install-html-am: $(HTMLS)
-	@$(NORMAL_INSTALL)
-	test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
-	@list='$(HTMLS)'; for p in $$list; do \
-	  if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
-	  f=$(html__strip_dir) \
-	  if test -d "$$d$$p"; then \
-	    echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
-	    echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
-	  else \
-	    echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
-	  fi; \
-	done
-
-install-html-recursive:
-	@failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
 .PHONY: install-exec-local install-data-local
 
 install-exec-local: ld-new$(EXEEXT)
diff --git a/ld/Makefile.in b/ld/Makefile.in
index 0f6a103..c51df46 100644
--- a/ld/Makefile.in
+++ b/ld/Makefile.in
@@ -769,8 +769,6 @@ MOSTLYCLEANFILES = $(STAGESTUFF) ld1$(EXEEXT) ld2$(EXEEXT) ld3$(EXEEXT) \
 	ldemul-list.h crtbegin.o crtend.o ld.log ld.sum
 
 CLEANFILES = dep.sed DEP DEPA DEP1 DEP2 spu_ovl.s spu_ovl.o spu_icache.s spu_icache.o
-pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
 
 # Stuff that should be included in a distribution.  The diststuff
 # target is run by the taz target in ../Makefile.in.
@@ -1311,6 +1309,29 @@ install-dvi-am: $(DVIS)
 	done
 install-exec-am: install-exec-local
 
+install-html: install-html-recursive
+
+install-html-am: $(HTMLS)
+	@$(NORMAL_INSTALL)
+	test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
+	@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  $(am__strip_dir) \
+	  if test -d "$$d$$p"; then \
+	    echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
+	    $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
+	    echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
+	    $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
+	  else \
+	    list2="$$list2 $$d$$p"; \
+	  fi; \
+	done; \
+	test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
+	done; }
 install-info: install-info-recursive
 
 install-info-am: $(INFO_DEPS)
@@ -1346,6 +1367,19 @@ install-info-am: $(INFO_DEPS)
 	else : ; fi
 install-man: install-man1
 
+install-pdf: install-pdf-recursive
+
+install-pdf-am: $(PDFS)
+	@$(NORMAL_INSTALL)
+	test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
+	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
 install-ps: install-ps-recursive
 
 install-ps-am: $(PSS)
@@ -2800,91 +2834,6 @@ ld.1: $(srcdir)/ld.texinfo configdoc.texi
 mostlyclean-local:
 	-rm -rf tmpdir
 
-.PHONY: install-pdf install-pdf-am install-pdf-recursive
-
-install-pdf: install-pdf-recursive install-pdf-am
-
-install-pdf-am: $(PDFS)
-	@$(NORMAL_INSTALL)
-	test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
-	@list='$(PDFS)'; for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(pdf__strip_dir) \
-	  echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
-	  $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
-	done
-
-install-pdf-recursive:
-	@failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-.PHONY: install-html install-html-am install-html-recursive
-
-install-html: install-html-recursive  install-html-am
-
-install-html-am: $(HTMLS)
-	@$(NORMAL_INSTALL)
-	test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
-	@list='$(HTMLS)'; for p in $$list; do \
-	  if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
-	  f=$(html__strip_dir) \
-	  if test -d "$$d$$p"; then \
-	    echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
-	    echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
-	  else \
-	    echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
-	  fi; \
-	done
-
-install-html-recursive:
-	@failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
 .PHONY: install-exec-local install-data-local
 
 install-exec-local: ld-new$(EXEEXT)
diff --git a/opcodes/ChangeLog b/opcodes/ChangeLog
index 7ca5487..cfdede8 100644
--- a/opcodes/ChangeLog
+++ b/opcodes/ChangeLog
@@ -1,5 +1,8 @@
 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 
+	* Makefile.am (install-pdf, install-html): Remove.
+	* Makefile.in: Regenerate.
+
 	* Makefile.in: Regenerate.
 	* aclocal.m4: Likewise.
 	* config.in: Likewise.
diff --git a/opcodes/Makefile.am b/opcodes/Makefile.am
index 077a9da..88b025f 100644
--- a/opcodes/Makefile.am
+++ b/opcodes/Makefile.am
@@ -16,12 +16,6 @@ AM_CFLAGS = $(WARN_CFLAGS)
 bfdlibdir = @bfdlibdir@
 bfdincludedir = @bfdincludedir@
 
-.PHONY: install-pdf
-install-pdf:
-
-.PHONY: install-html
-install-html:
-
 bfdlib_LTLIBRARIES = libopcodes.la
 
 # This is where bfd.h lives.
diff --git a/opcodes/Makefile.in b/opcodes/Makefile.in
index 978cb8f..f352e6b 100644
--- a/opcodes/Makefile.in
+++ b/opcodes/Makefile.in
@@ -995,6 +995,8 @@ install-dvi-am:
 
 install-exec-am:
 
+install-html: install-html-recursive
+
 install-html-am:
 
 install-info: install-info-recursive
@@ -1003,6 +1005,8 @@ install-info-am:
 
 install-man:
 
+install-pdf: install-pdf-recursive
+
 install-pdf-am:
 
 install-ps: install-ps-recursive
@@ -1053,12 +1057,6 @@ uninstall-am: uninstall-bfdlibLTLIBRARIES
 	uninstall-bfdlibLTLIBRARIES
 
 
-.PHONY: install-pdf
-install-pdf:
-
-.PHONY: install-html
-install-html:
-
 disassemble.lo: disassemble.c $(INCDIR)/dis-asm.h
 	$(LIBTOOL) --mode=compile $(COMPILE) -c @archdefs@ $(srcdir)/disassemble.c