aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorNicholas Duffek <nsd@redhat.com>2000-04-07 01:14:10 +0000
committerNicholas Duffek <nsd@redhat.com>2000-04-07 01:14:10 +0000
commit2f09097b734af8840d2141a26a53b9c67e67fcf2 (patch)
treec6fd0a041816d5bfb6211d1fde18788f1e51d223
parent34cbe64ecf7ae8c7e029e4af582d98a7910a3bcf (diff)
downloadgdb-2f09097b734af8840d2141a26a53b9c67e67fcf2.zip
gdb-2f09097b734af8840d2141a26a53b9c67e67fcf2.tar.gz
gdb-2f09097b734af8840d2141a26a53b9c67e67fcf2.tar.bz2
* sol-thread.c (GET_LWP, GET_THREAD, BUILD_LWP, BUILD_THREAD):
Change to rely on PIDGET etc. * config/i386/nm-i386sol2.h (TARGET_HAS_WATCHPOINTS, TARGET_CAN_USE_HARDWARE_WATCHPOINT, HAVE_CONTINUABLE_WATCHPOINT, STOPPED_BY_WATCHPOINT, target_[insert/remove]_watchpoint): define. Allow target to use procfs hardware watchpoints. * config/sparc/nm-sun4sol2.h: ditto. * config/i386/tm-i386sol2.h (PIDGET, TIDGET, MERGEPID): modify definitions to use 16 bits for the pid, 15 bits for the tid, and 1 bit for the flag. * config/sparc/tm-sun4sol2.h: ditto. (SOFTWARE_SINGLE_STEP, SOFTWARE_SINGLE_STEP_P): undefine. * testsuite/gdb.threads/pthreads.exp (all_threads_running): Allow for more than 15 thread increments.
-rw-r--r--gdb/ChangeLog17
-rw-r--r--gdb/config/i386/nm-i386sol2.h28
-rw-r--r--gdb/config/i386/tm-i386sol2.h10
-rw-r--r--gdb/config/sparc/nm-sun4sol2.h28
-rw-r--r--gdb/config/sparc/tm-sun4sol2.h13
-rw-r--r--gdb/sol-thread.c20
-rw-r--r--gdb/testsuite/gdb.threads/pthreads.exp9
7 files changed, 109 insertions, 16 deletions
diff --git a/gdb/ChangeLog b/gdb/ChangeLog
index 2d684f9..4de8cb0 100644
--- a/gdb/ChangeLog
+++ b/gdb/ChangeLog
@@ -1,3 +1,20 @@
+2000-04-06 Michael Snyder <msnyder@cygnus.com>
+
+ * sol-thread.c (GET_LWP, GET_THREAD, BUILD_LWP, BUILD_THREAD):
+ Change to rely on PIDGET etc.
+ * config/i386/nm-i386sol2.h (TARGET_HAS_WATCHPOINTS,
+ TARGET_CAN_USE_HARDWARE_WATCHPOINT, HAVE_CONTINUABLE_WATCHPOINT,
+ STOPPED_BY_WATCHPOINT, target_[insert/remove]_watchpoint):
+ define. Allow target to use procfs hardware watchpoints.
+ * config/sparc/nm-sun4sol2.h: ditto.
+ * config/i386/tm-i386sol2.h (PIDGET, TIDGET, MERGEPID): modify
+ definitions to use 16 bits for the pid, 15 bits for the tid, and
+ 1 bit for the flag.
+ * config/sparc/tm-sun4sol2.h: ditto.
+ (SOFTWARE_SINGLE_STEP, SOFTWARE_SINGLE_STEP_P): undefine.
+ * testsuite/gdb.threads/pthreads.exp (all_threads_running): Allow
+ for more than 15 thread increments.
+
2000-04-06 Eli Zaretskii <eliz@is.elta.co.il>
* top.c (filename_completer): Set subsequent_name to 1 early on,
diff --git a/gdb/config/i386/nm-i386sol2.h b/gdb/config/i386/nm-i386sol2.h
index 8ccc910..2c4b4d4 100644
--- a/gdb/config/i386/nm-i386sol2.h
+++ b/gdb/config/i386/nm-i386sol2.h
@@ -20,3 +20,31 @@
#include "nm-sysv4.h"
+#ifdef NEW_PROC_API /* Solaris 6 and above can do HW watchpoints */
+
+#define TARGET_HAS_HARDWARE_WATCHPOINTS
+
+/* The man page for proc4 on solaris 6 and 7 says that the system
+ can support "thousands" of hardware watchpoints, but gives no
+ method for finding out how many. So just tell GDB 'yes'. */
+#define TARGET_CAN_USE_HARDWARE_WATCHPOINT(TYPE, CNT, OT) 1
+
+/* When a hardware watchpoint fires off the PC will be left at the
+ instruction following the one which caused the watchpoint.
+ It will *NOT* be necessary for GDB to step over the watchpoint. */
+#define HAVE_CONTINUABLE_WATCHPOINT
+
+extern int procfs_stopped_by_watchpoint PARAMS ((int));
+#define STOPPED_BY_WATCHPOINT(W) \
+ procfs_stopped_by_watchpoint(inferior_pid)
+
+/* Use these macros for watchpoint insertion/deletion. */
+/* type can be 0: write watch, 1: read watch, 2: access watch (read/write) */
+
+extern int procfs_set_watchpoint PARAMS ((int, CORE_ADDR, int, int, int));
+#define target_insert_watchpoint(ADDR, LEN, TYPE) \
+ procfs_set_watchpoint (inferior_pid, ADDR, LEN, TYPE, 1)
+#define target_remove_watchpoint(ADDR, LEN, TYPE) \
+ procfs_set_watchpoint (inferior_pid, ADDR, 0, 0, 0)
+
+#endif /* NEW_PROC_API */
diff --git a/gdb/config/i386/tm-i386sol2.h b/gdb/config/i386/tm-i386sol2.h
index 0967ba5..da231eb 100644
--- a/gdb/config/i386/tm-i386sol2.h
+++ b/gdb/config/i386/tm-i386sol2.h
@@ -42,9 +42,11 @@ extern char *sunpro_static_transform_name PARAMS ((char *));
#define FAULTED_USE_SIGINFO
-/* Macros to extract process id and thread id from a composite pid/tid */
-#define PIDGET(pid) ((pid) & 0xffff)
-#define TIDGET(pid) (((pid) >> 16) & 0xffff)
-#define MERGEPID(pid, tid) (((tid) << 16) | (pid))
+/* Macros to extract process id and thread id from a composite pid/tid.
+ Allocate lower 16 bits for process id, next 15 bits for thread id, and
+ one bit for a flag to indicate a user thread vs. a kernel thread. */
+#define PIDGET(PID) (((PID) & 0xffff))
+#define TIDGET(PID) (((PID) & 0x7fffffff) >> 16)
+#define MERGEPID(PID, TID) (((PID) & 0xffff) | ((TID) << 16))
#endif /* ifndef TM_I386SOL2_H */
diff --git a/gdb/config/sparc/nm-sun4sol2.h b/gdb/config/sparc/nm-sun4sol2.h
index 6e9e74f..9d5dd1d 100644
--- a/gdb/config/sparc/nm-sun4sol2.h
+++ b/gdb/config/sparc/nm-sun4sol2.h
@@ -30,3 +30,31 @@
#define PRSVADDR_BROKEN
+#ifdef NEW_PROC_API /* Solaris 6 and above can do HW watchpoints */
+
+#define TARGET_HAS_HARDWARE_WATCHPOINTS
+
+/* The man page for proc4 on solaris 6 and 7 says that the system
+ can support "thousands" of hardware watchpoints, but gives no
+ method for finding out how many. So just tell GDB 'yes'. */
+#define TARGET_CAN_USE_HARDWARE_WATCHPOINT(TYPE, CNT, OT) 1
+
+/* When a hardware watchpoint fires off the PC will be left at the
+ instruction following the one which caused the watchpoint.
+ It will *NOT* be necessary for GDB to step over the watchpoint. */
+#define HAVE_CONTINUABLE_WATCHPOINT
+
+extern int procfs_stopped_by_watchpoint PARAMS ((int));
+#define STOPPED_BY_WATCHPOINT(W) \
+ procfs_stopped_by_watchpoint(inferior_pid)
+
+/* Use these macros for watchpoint insertion/deletion. */
+/* type can be 0: write watch, 1: read watch, 2: access watch (read/write) */
+
+extern int procfs_set_watchpoint PARAMS ((int, CORE_ADDR, int, int, int));
+#define target_insert_watchpoint(ADDR, LEN, TYPE) \
+ procfs_set_watchpoint (inferior_pid, ADDR, LEN, TYPE, 1)
+#define target_remove_watchpoint(ADDR, LEN, TYPE) \
+ procfs_set_watchpoint (inferior_pid, ADDR, 0, 0, 0)
+
+#endif /* NEW_PROC_API */
diff --git a/gdb/config/sparc/tm-sun4sol2.h b/gdb/config/sparc/tm-sun4sol2.h
index e348f79..a432d61 100644
--- a/gdb/config/sparc/tm-sun4sol2.h
+++ b/gdb/config/sparc/tm-sun4sol2.h
@@ -22,6 +22,11 @@
#include "sparc/tm-sparc.h"
#include "tm-sysv4.h"
+/* With Sol2 it is no longer necessary to enable software single-step,
+ since the /proc interface can take care of it for us in hardware. */
+#undef SOFTWARE_SINGLE_STEP
+#undef SOFTWARE_SINGLE_STEP_P
+
/* There are two different signal handler trampolines in Solaris2. */
#define IN_SIGTRAMP(pc, name) \
((name) \
@@ -33,7 +38,7 @@
ucbsigvechandler. */
#define SIGCONTEXT_PC_OFFSET 44
-#if 0 /* FIXME Setjmp/longjmp are not as well doc'd in SunOS 5.x yet */
+#if 0 /* FIXME Setjmp/longjmp are not as well doc'd in SunOS 5.x yet */
/* Offsets into jmp_buf. Not defined by Sun, but at least documented in a
comment in <machine/setjmp.h>! */
@@ -76,6 +81,6 @@ extern char *sunpro_static_transform_name PARAMS ((char *));
#define HANDLE_SVR4_EXEC_EMULATORS
/* Macros to extract process id and thread id from a composite pid/tid */
-#define PIDGET(pid) ((pid) & 0xffff)
-#define TIDGET(pid) (((pid) >> 16) & 0xffff)
-#define MERGEPID(pid, tid) (((tid) << 16) | (pid))
+#define PIDGET(PID) (((PID) & 0xffff))
+#define TIDGET(PID) (((PID) & 0x7fffffff) >> 16)
+#define MERGEPID(PID, TID) (((PID) & 0xffff) | ((TID) << 16))
diff --git a/gdb/sol-thread.c b/gdb/sol-thread.c
index a3d2d2c..5d2197e 100644
--- a/gdb/sol-thread.c
+++ b/gdb/sol-thread.c
@@ -122,14 +122,14 @@ static void init_sol_core_ops PARAMS ((void));
/* Default definitions: These must be defined in tm.h
if they are to be shared with a process module such as procfs. */
-#define THREAD_FLAG 0x80000000
-#define is_thread(ARG) (((ARG) & THREAD_FLAG) != 0)
-#define is_lwp(ARG) (((ARG) & THREAD_FLAG) == 0)
-#define GET_LWP(PID) TIDGET (PID)
-#define GET_THREAD(PID) (((PID) >> 16) & 0x7fff)
-#define BUILD_LWP(TID, PID) ((TID) << 16 | (PID))
+#define THREAD_FLAG 0x80000000
+#define is_thread(ARG) (((ARG) & THREAD_FLAG) != 0)
+#define is_lwp(ARG) (((ARG) & THREAD_FLAG) == 0)
+#define GET_LWP(PID) TIDGET (PID)
+#define GET_THREAD(PID) TIDGET (PID)
+#define BUILD_LWP(TID, PID) MERGEPID (PID, TID)
-#define BUILD_THREAD(THREAD_ID, PID) (THREAD_FLAG | BUILD_LWP (THREAD_ID, PID))
+#define BUILD_THREAD(TID, PID) (MERGEPID (PID, TID) | THREAD_FLAG)
/* Pointers to routines from lithread_db resolved by dlopen() */
@@ -1328,6 +1328,12 @@ ps_lgetLDT (gdb_ps_prochandle_t ph, lwpid_t lwpid,
extern struct ssd *procfs_find_LDT_entry (int);
struct ssd *ret;
+ /* FIXME: can't I get the process ID from the prochandle or something?
+ */
+
+ if (inferior_pid <= 0 || lwpid <= 0)
+ return PS_BADLID;
+
ret = procfs_find_LDT_entry (BUILD_LWP (lwpid, PIDGET (inferior_pid)));
if (ret)
{
diff --git a/gdb/testsuite/gdb.threads/pthreads.exp b/gdb/testsuite/gdb.threads/pthreads.exp
index 15a5df8..2e7f29c 100644
--- a/gdb/testsuite/gdb.threads/pthreads.exp
+++ b/gdb/testsuite/gdb.threads/pthreads.exp
@@ -113,7 +113,7 @@ proc all_threads_running {} {
# been called 15 times. This should be plenty of time to allow
# every thread to run at least once, since each thread sleeps for
# one second between calls to common_routine.
- gdb_test "tbreak common_routine if hits == 15" ""
+ gdb_test "tbreak common_routine if hits >= 15" ""
# Start all the threads running again and wait for the inferior
# to stop. Since no other breakpoints are set at this time
@@ -135,9 +135,16 @@ proc all_threads_running {} {
# Check that we stopped when we actually expected to stop, by
# verifying that there have been 15 previous hits.
+ # NOTE: Because of synchronization behavior, it is possible for
+ # more than one thread to increment "hits" between one breakpoint
+ # trap and the next. So stopping after 16 or 17 hits should be
+ # considered acceptable.
+
send_gdb "p common_routine::hits\n"
gdb_expect {
-re ".*= 15\r\n$gdb_prompt $" {}
+ -re ".*= 16\r\n$gdb_prompt $" {}
+ -re ".*= 17\r\n$gdb_prompt $" {}
default {
fail "stopped before calling common_routine 15 times"
return 0