* MAINTAINERS: Mark a29k as deleted.

* NEWS: Mention that a29k was removed.  Add OBSOLETE section.
Move new configurations to the top.
* configure.tgt: Remove a29k.
* config/a29k/tm-vx29k.h: Delete.
* config/a29k/vx29k.mt: Delete.
* config/a29k/tm-a29k.h: Delete.
* config/a29k/a29k-udi.mt: Delete.
* config/a29k/a29k.mt: Delete.
* a29k-tdep.c: Delete.
* remote-udi.c: Delete.
* remote-mm.c: Delete.
* remote-eb.c: Delete.
* remote-adapt.c: Delete.
* Makefile.in: Remove obsolete code.
* gdbserver/Makefile.in: Ditto.
* config/s390/s390x.mt: Ditto.
* config/s390/s390.mt: Ditto.
* config/sparc/sparclynx.mh: Ditto.
* config/sparc/linux.mh: Ditto.
* config/pa/hppaosf.mh: Ditto.
* config/pa/hppabsd.mh: Ditto.
* config/ns32k/nbsd.mt: Ditto.
* config/mips/vr5000.mt: Ditto.
* config/m68k/sun3os4.mh: Ditto.
* config/m68k/nbsd.mt: Ditto.
* config/m68k/m68klynx.mh: Ditto.
* config/m32r/m32r.mt: Ditto.
* config/i386/x86-64linux.mt: Ditto.
* config/i386/nbsdelf.mt: Ditto.
* config/i386/nbsd.mt: Ditto.
* config/i386/i386lynx.mh: Ditto.

35 files changed, 58 insertions, 8248 deletions

diff --git a/gdb/ChangeLog b/gdb/ChangeLog
index de25269..41f5904 100644
--- a/gdb/ChangeLog
+++ b/gdb/ChangeLog
@@ -1,5 +1,40 @@
 2002-05-04  Andrew Cagney  <ac131313@redhat.com>
 
+	* MAINTAINERS: Mark a29k as deleted.
+	* NEWS: Mention that a29k was removed.  Add OBSOLETE section.
+	Move new configurations to the top.
+	* configure.tgt: Remove a29k.
+	* config/a29k/tm-vx29k.h: Delete.
+	* config/a29k/vx29k.mt: Delete.
+	* config/a29k/tm-a29k.h: Delete.
+	* config/a29k/a29k-udi.mt: Delete.
+	* config/a29k/a29k.mt: Delete.
+	* a29k-tdep.c: Delete.
+	* remote-udi.c: Delete.
+	* remote-mm.c: Delete.
+	* remote-eb.c: Delete.
+	* remote-adapt.c: Delete.
+	* Makefile.in: Remove obsolete code.
+	* gdbserver/Makefile.in: Ditto.
+	* config/s390/s390x.mt: Ditto.
+	* config/s390/s390.mt: Ditto.
+	* config/sparc/sparclynx.mh: Ditto.
+	* config/sparc/linux.mh: Ditto.
+	* config/pa/hppaosf.mh: Ditto.
+	* config/pa/hppabsd.mh: Ditto.
+	* config/ns32k/nbsd.mt: Ditto.
+	* config/mips/vr5000.mt: Ditto.
+	* config/m68k/sun3os4.mh: Ditto.
+	* config/m68k/nbsd.mt: Ditto.
+	* config/m68k/m68klynx.mh: Ditto.
+	* config/m32r/m32r.mt: Ditto.
+	* config/i386/x86-64linux.mt: Ditto.
+	* config/i386/nbsdelf.mt: Ditto.
+	* config/i386/nbsd.mt: Ditto.
+	* config/i386/i386lynx.mh: Ditto.
+
+2002-05-04  Andrew Cagney  <ac131313@redhat.com>
+
 	* target.c (debug_print_register): New function.  Handle oversize
 	registers.
 	(debug_to_fetch_registers): Call.
diff --git a/gdb/MAINTAINERS b/gdb/MAINTAINERS
index 932a3f4..de8e371 100644
--- a/gdb/MAINTAINERS
+++ b/gdb/MAINTAINERS
@@ -54,7 +54,7 @@ variants.  *-tdep.c. The Target/Architecture maintainer works with the
 host maintainer when resolving build issues.  The Target/Architecture
 maintainer works with the native maintainer when resolving API issues.
 
-	a29k		OBSOLETE
+	a29k		Deleted.
 
 	alpha		--target=alpha-dec-osf4.0a -Werror
 			Maintenance only
diff --git a/gdb/Makefile.in b/gdb/Makefile.in
index c87eb17..de30f43 100644
--- a/gdb/Makefile.in
+++ b/gdb/Makefile.in
@@ -1239,9 +1239,6 @@ udi2go32.o: $(srcdir)/29k-share/udi/udi2go32.c $(udiheaders)
 udr.o: $(srcdir)/29k-share/udi/udr.c $(udiheaders) 
 	$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/29k-share/udi/udr.c
 
-# OBSOLETE a29k-tdep.o: a29k-tdep.c $(gdbcmd_h) $(gdbcore_h) $(inferior_h) $(defs_h) \
-# OBSOLETE 	$(regcache_h)
-
 a68v-nat.o: a68v-nat.c $(defs_h) $(gdbcore_h) $(inferior_h) \
 	$(regcache_h)
 
@@ -1903,9 +1900,6 @@ lin-lwp.o: lin-lwp.c $(defs_h) gdb_assert.h gdb_wait.h $(gdbthread_h) \
 proc-service.o: proc-service.c $(defs_h) $(inferior_h) gdb_proc_service.h \
 	$(symtab_h) $(target_h) gregset.h
 
-# OBSOLETE remote-adapt.o: remote-adapt.c $(defs_h) $(gdbcore_h) \
-# OBSOLETE	$(inferior_h) $(target_h) $(terminal_h) $(gdb_string_h) $(regcache_h)
-
 remote-array.o: remote-array.c $(defs_h) $(gdbcore_h) $(target_h) \
       $(gdb_string_h) $(command_h) $(serial_h) $(monitor_h) $(remote_utils_h) \
 	$(version_h) $(regcache_h)
@@ -1933,10 +1927,6 @@ remote-bug.o: remote-bug.c $(defs_h) $(gdbcore_h) $(serial_h) \
 remote-e7000.o: remote-e7000.c $(defs_h) $(gdbcore_h) $(target_h) \
 	$(serial_h) $(gdb_string_h) $(regcache_h)
 
-# OBSOLETE remote-eb.o: remote-eb.c $(srcdir)/config/a29k/tm-a29k.h \
-# OBSOLETE 	$(defs_h) $(gdbcore_h) $(inferior_h) $(symfile_h) $(target_h) \
-# OBSOLETE 	$(terminal_h) $(gdb_string_h) $(regcache_h)
-
 remote-es.o: remote-es.c $(bfd_h) $(command_h) $(defs_h) \
 	$(inferior_h) $(remote_utils_h) $(terminal_h) $(gdb_string_h) \
 	$(symfile_h) $(regcache_h) $(value_h)
@@ -1951,9 +1941,6 @@ remote-mips.o: remote-mips.c $(defs_h) $(gdbcmd_h) \
 	$(gdbcore_h) $(inferior_h) $(serial_h) $(symfile_h) $(target_h) \
 	$(regcache_h)
 
-# OBSOLETE remote-mm.o: remote-mm.c $(bfd_h) $(defs_h) $(inferior_h) \
-# OBSOLETE	minimon.h $(target_h) $(terminal_h) $(gdb_string_h) $(regcache_h)
-
 remote-nindy.o: remote-nindy.c $(floatformat_h) $(command_h) \
 	$(defs_h) $(gdbcore_h) $(inferior_h) \
 	nindy-share/env.h nindy-share/stop.h $(remote_utils_h) \
@@ -1974,10 +1961,6 @@ remote-sim.o: remote-sim.c $(defs_h) $(gdbcore_h) \
 remote-st.o: remote-st.c $(defs_h) $(gdbcore_h) $(serial_h) \
 	$(target_h) $(gdb_string_h) $(regcache_h)
 
-# OBSOLETE remote-udi.o: remote-udi.c $(bfd_h) $(defs_h) $(gdbcmd_h) \
-# OBSOLETE 	$(inferior_h) $(target_h) $(terminal_h) $(udiheaders) $(gdb_string_h) \
-# OBSOLETE 	$(regcache_h)
-
 remote-vx.o: remote-vx.c $(complaints_h) $(defs_h) $(gdbcmd_h) \
 	$(gdbcore_h) $(inferior_h) $(target_h) vx-share/dbgRpcLib.h \
 	vx-share/ptrace.h vx-share/xdr_ld.h vx-share/xdr_ptrace.h \
diff --git a/gdb/NEWS b/gdb/NEWS
index 8de3d0d..b4076f7 100644
--- a/gdb/NEWS
+++ b/gdb/NEWS
@@ -3,18 +3,35 @@
 
 *** Changes since GDB 5.2:
 
-* New target.
+* New targets.
 
 Atmel AVR					avr*-*-*
 
-* Changes in VAX configurations.
-
-Multi-arch support is enabled for all VAX configurations.
-
 * New native configurations
 
 Alpha NetBSD					alpha*-*-netbsd*
 
+* OBSOLETE configurations and files
+
+Configurations that have been declared obsolete in this release have
+been commented out.  Unless there is activity to revive these
+configurations, the next release of GDB will have their sources
+permanently REMOVED.
+
+* REMOVED configurations and files
+
+AMD 29k family via UDI				a29k-amd-udi, udi29k
+A29K VxWorks					a29k-*-vxworks
+AMD 29000 embedded, using EBMON			a29k-none-none
+AMD 29000 embedded with COFF			a29k-none-coff
+AMD 29000 embedded with a.out			a29k-none-aout
+
+testsuite/gdb.hp/gdb.threads-hp/		directory
+
+* Changes in VAX configurations.
+
+Multi-arch support is enabled for all VAX configurations.
+
 * Changes in Alpha configurations. 
 
 Multi-arch support is enabled for all Alpha configurations.
diff --git a/gdb/a29k-tdep.c b/gdb/a29k-tdep.c
deleted file mode 100644
index 4fcc0f2..0000000
--- a/gdb/a29k-tdep.c
+++ /dev/null
@@ -1,1015 +0,0 @@
-/* OBSOLETE /* Target-machine dependent code for the AMD 29000 */
-/* OBSOLETE    Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, */
-/* OBSOLETE    2001 */
-/* OBSOLETE    Free Software Foundation, Inc. */
-/* OBSOLETE    Contributed by Cygnus Support.  Written by Jim Kingdon. */
-/* OBSOLETE  */
-/* OBSOLETE    This file is part of GDB. */
-/* OBSOLETE  */
-/* OBSOLETE    This program is free software; you can redistribute it and/or modify */
-/* OBSOLETE    it under the terms of the GNU General Public License as published by */
-/* OBSOLETE    the Free Software Foundation; either version 2 of the License, or */
-/* OBSOLETE    (at your option) any later version. */
-/* OBSOLETE  */
-/* OBSOLETE    This program is distributed in the hope that it will be useful, */
-/* OBSOLETE    but WITHOUT ANY WARRANTY; without even the implied warranty of */
-/* OBSOLETE    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the */
-/* OBSOLETE    GNU General Public License for more details. */
-/* OBSOLETE  */
-/* OBSOLETE    You should have received a copy of the GNU General Public License */
-/* OBSOLETE    along with this program; if not, write to the Free Software */
-/* OBSOLETE    Foundation, Inc., 59 Temple Place - Suite 330, */
-/* OBSOLETE    Boston, MA 02111-1307, USA.  */ */
-/* OBSOLETE  */
-/* OBSOLETE #include "defs.h" */
-/* OBSOLETE #include "gdbcore.h" */
-/* OBSOLETE #include "frame.h" */
-/* OBSOLETE #include "value.h" */
-/* OBSOLETE #include "symtab.h" */
-/* OBSOLETE #include "inferior.h" */
-/* OBSOLETE #include "gdbcmd.h" */
-/* OBSOLETE #include "regcache.h" */
-/* OBSOLETE  */
-/* OBSOLETE /* If all these bits in an instruction word are zero, it is a "tag word" */
-/* OBSOLETE    which precedes a function entry point and gives stack traceback info. */
-/* OBSOLETE    This used to be defined as 0xff000000, but that treated 0x00000deb as */
-/* OBSOLETE    a tag word, while it is really used as a breakpoint.  */ */
-/* OBSOLETE #define	TAGWORD_ZERO_MASK	0xff00f800 */
-/* OBSOLETE  */
-/* OBSOLETE extern CORE_ADDR text_start;	/* FIXME, kludge... */ */
-/* OBSOLETE  */
-/* OBSOLETE /* The user-settable top of the register stack in virtual memory.  We */
-/* OBSOLETE    won't attempt to access any stored registers above this address, if set */
-/* OBSOLETE    nonzero.  */ */
-/* OBSOLETE  */
-/* OBSOLETE static CORE_ADDR rstack_high_address = UINT_MAX; */
-/* OBSOLETE  */
-/* OBSOLETE  */
-/* OBSOLETE /* Should call_function allocate stack space for a struct return?  */ */
-/* OBSOLETE /* On the a29k objects over 16 words require the caller to allocate space.  */ */
-/* OBSOLETE int */
-/* OBSOLETE a29k_use_struct_convention (int gcc_p, struct type *type) */
-/* OBSOLETE { */
-/* OBSOLETE   return (TYPE_LENGTH (type) > 16 * 4); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE  */
-/* OBSOLETE /* Structure to hold cached info about function prologues.  */ */
-/* OBSOLETE  */
-/* OBSOLETE struct prologue_info */
-/* OBSOLETE { */
-/* OBSOLETE   CORE_ADDR pc;			/* First addr after fn prologue */ */
-/* OBSOLETE   unsigned rsize, msize;	/* register stack frame size, mem stack ditto */ */
-/* OBSOLETE   unsigned mfp_used:1;		/* memory frame pointer used */ */
-/* OBSOLETE   unsigned rsize_valid:1;	/* Validity bits for the above */ */
-/* OBSOLETE   unsigned msize_valid:1; */
-/* OBSOLETE   unsigned mfp_valid:1; */
-/* OBSOLETE }; */
-/* OBSOLETE  */
-/* OBSOLETE /* Examine the prologue of a function which starts at PC.  Return */
-/* OBSOLETE    the first addess past the prologue.  If MSIZE is non-NULL, then */
-/* OBSOLETE    set *MSIZE to the memory stack frame size.  If RSIZE is non-NULL, */
-/* OBSOLETE    then set *RSIZE to the register stack frame size (not including */
-/* OBSOLETE    incoming arguments and the return address & frame pointer stored */
-/* OBSOLETE    with them).  If no prologue is found, *RSIZE is set to zero. */
-/* OBSOLETE    If no prologue is found, or a prologue which doesn't involve */
-/* OBSOLETE    allocating a memory stack frame, then set *MSIZE to zero. */
-/* OBSOLETE  */
-/* OBSOLETE    Note that both msize and rsize are in bytes.  This is not consistent */
-/* OBSOLETE    with the _User's Manual_ with respect to rsize, but it is much more */
-/* OBSOLETE    convenient. */
-/* OBSOLETE  */
-/* OBSOLETE    If MFP_USED is non-NULL, *MFP_USED is set to nonzero if a memory */
-/* OBSOLETE    frame pointer is being used.  */ */
-/* OBSOLETE  */
-/* OBSOLETE CORE_ADDR */
-/* OBSOLETE examine_prologue (CORE_ADDR pc, unsigned *rsize, unsigned *msize, int *mfp_used) */
-/* OBSOLETE { */
-/* OBSOLETE   long insn; */
-/* OBSOLETE   CORE_ADDR p = pc; */
-/* OBSOLETE   struct minimal_symbol *msymbol = lookup_minimal_symbol_by_pc (pc); */
-/* OBSOLETE   struct prologue_info *mi = 0; */
-/* OBSOLETE  */
-/* OBSOLETE   if (msymbol != NULL) */
-/* OBSOLETE     mi = (struct prologue_info *) msymbol->info; */
-/* OBSOLETE  */
-/* OBSOLETE   if (mi != 0) */
-/* OBSOLETE     { */
-/* OBSOLETE       int valid = 1; */
-/* OBSOLETE       if (rsize != NULL) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  *rsize = mi->rsize; */
-/* OBSOLETE 	  valid &= mi->rsize_valid; */
-/* OBSOLETE 	} */
-/* OBSOLETE       if (msize != NULL) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  *msize = mi->msize; */
-/* OBSOLETE 	  valid &= mi->msize_valid; */
-/* OBSOLETE 	} */
-/* OBSOLETE       if (mfp_used != NULL) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  *mfp_used = mi->mfp_used; */
-/* OBSOLETE 	  valid &= mi->mfp_valid; */
-/* OBSOLETE 	} */
-/* OBSOLETE       if (valid) */
-/* OBSOLETE 	return mi->pc; */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   if (rsize != NULL) */
-/* OBSOLETE     *rsize = 0; */
-/* OBSOLETE   if (msize != NULL) */
-/* OBSOLETE     *msize = 0; */
-/* OBSOLETE   if (mfp_used != NULL) */
-/* OBSOLETE     *mfp_used = 0; */
-/* OBSOLETE  */
-/* OBSOLETE   /* Prologue must start with subtracting a constant from gr1. */
-/* OBSOLETE      Normally this is sub gr1,gr1,<rsize * 4>.  */ */
-/* OBSOLETE   insn = read_memory_integer (p, 4); */
-/* OBSOLETE   if ((insn & 0xffffff00) != 0x25010100) */
-/* OBSOLETE     { */
-/* OBSOLETE       /* If the frame is large, instead of a single instruction it */
-/* OBSOLETE          might be a pair of instructions: */
-/* OBSOLETE          const <reg>, <rsize * 4> */
-/* OBSOLETE          sub gr1,gr1,<reg> */
-/* OBSOLETE        */ */
-/* OBSOLETE       int reg; */
-/* OBSOLETE       /* Possible value for rsize.  */ */
-/* OBSOLETE       unsigned int rsize0; */
-/* OBSOLETE  */
-/* OBSOLETE       if ((insn & 0xff000000) != 0x03000000) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  p = pc; */
-/* OBSOLETE 	  goto done; */
-/* OBSOLETE 	} */
-/* OBSOLETE       reg = (insn >> 8) & 0xff; */
-/* OBSOLETE       rsize0 = (((insn >> 8) & 0xff00) | (insn & 0xff)); */
-/* OBSOLETE       p += 4; */
-/* OBSOLETE       insn = read_memory_integer (p, 4); */
-/* OBSOLETE       if ((insn & 0xffffff00) != 0x24010100 */
-/* OBSOLETE 	  || (insn & 0xff) != reg) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  p = pc; */
-/* OBSOLETE 	  goto done; */
-/* OBSOLETE 	} */
-/* OBSOLETE       if (rsize != NULL) */
-/* OBSOLETE 	*rsize = rsize0; */
-/* OBSOLETE     } */
-/* OBSOLETE   else */
-/* OBSOLETE     { */
-/* OBSOLETE       if (rsize != NULL) */
-/* OBSOLETE 	*rsize = (insn & 0xff); */
-/* OBSOLETE     } */
-/* OBSOLETE   p += 4; */
-/* OBSOLETE  */
-/* OBSOLETE   /* Next instruction ought to be asgeu V_SPILL,gr1,rab.   */
-/* OBSOLETE    * We don't check the vector number to allow for kernel debugging.  The  */
-/* OBSOLETE    * kernel will use a different trap number.  */
-/* OBSOLETE    * If this insn is missing, we just keep going; Metaware R2.3u compiler */
-/* OBSOLETE    * generates prologue that intermixes initializations and puts the asgeu */
-/* OBSOLETE    * way down. */
-/* OBSOLETE    */ */
-/* OBSOLETE   insn = read_memory_integer (p, 4); */
-/* OBSOLETE   if ((insn & 0xff00ffff) == (0x5e000100 | RAB_HW_REGNUM)) */
-/* OBSOLETE     { */
-/* OBSOLETE       p += 4; */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   /* Next instruction usually sets the frame pointer (lr1) by adding */
-/* OBSOLETE      <size * 4> from gr1.  However, this can (and high C does) be */
-/* OBSOLETE      deferred until anytime before the first function call.  So it is */
-/* OBSOLETE      OK if we don't see anything which sets lr1.   */
-/* OBSOLETE      To allow for alternate register sets (gcc -mkernel-registers)  the msp */
-/* OBSOLETE      register number is a compile time constant. */ */
-/* OBSOLETE  */
-/* OBSOLETE   /* Normally this is just add lr1,gr1,<size * 4>.  */ */
-/* OBSOLETE   insn = read_memory_integer (p, 4); */
-/* OBSOLETE   if ((insn & 0xffffff00) == 0x15810100) */
-/* OBSOLETE     p += 4; */
-/* OBSOLETE   else */
-/* OBSOLETE     { */
-/* OBSOLETE       /* However, for large frames it can be */
-/* OBSOLETE          const <reg>, <size *4> */
-/* OBSOLETE          add lr1,gr1,<reg> */
-/* OBSOLETE        */ */
-/* OBSOLETE       int reg; */
-/* OBSOLETE       CORE_ADDR q; */
-/* OBSOLETE  */
-/* OBSOLETE       if ((insn & 0xff000000) == 0x03000000) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  reg = (insn >> 8) & 0xff; */
-/* OBSOLETE 	  q = p + 4; */
-/* OBSOLETE 	  insn = read_memory_integer (q, 4); */
-/* OBSOLETE 	  if ((insn & 0xffffff00) == 0x14810100 */
-/* OBSOLETE 	      && (insn & 0xff) == reg) */
-/* OBSOLETE 	    p = q; */
-/* OBSOLETE 	} */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   /* Next comes "add lr{<rsize-1>},msp,0", but only if a memory */
-/* OBSOLETE      frame pointer is in use.  We just check for add lr<anything>,msp,0; */
-/* OBSOLETE      we don't check this rsize against the first instruction, and */
-/* OBSOLETE      we don't check that the trace-back tag indicates a memory frame pointer */
-/* OBSOLETE      is in use.   */
-/* OBSOLETE      To allow for alternate register sets (gcc -mkernel-registers)  the msp */
-/* OBSOLETE      register number is a compile time constant. */
-/* OBSOLETE  */
-/* OBSOLETE      The recommended instruction is actually "sll lr<whatever>,msp,0".  */
-/* OBSOLETE      We check for that, too.  Originally Jim Kingdon's code seemed */
-/* OBSOLETE      to be looking for a "sub" instruction here, but the mask was set */
-/* OBSOLETE      up to lose all the time. */ */
-/* OBSOLETE   insn = read_memory_integer (p, 4); */
-/* OBSOLETE   if (((insn & 0xff80ffff) == (0x15800000 | (MSP_HW_REGNUM << 8)))	/* add */ */
-/* OBSOLETE       || ((insn & 0xff80ffff) == (0x81800000 | (MSP_HW_REGNUM << 8))))	/* sll */ */
-/* OBSOLETE     { */
-/* OBSOLETE       p += 4; */
-/* OBSOLETE       if (mfp_used != NULL) */
-/* OBSOLETE 	*mfp_used = 1; */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   /* Next comes a subtraction from msp to allocate a memory frame, */
-/* OBSOLETE      but only if a memory frame is */
-/* OBSOLETE      being used.  We don't check msize against the trace-back tag. */
-/* OBSOLETE  */
-/* OBSOLETE      To allow for alternate register sets (gcc -mkernel-registers) the msp */
-/* OBSOLETE      register number is a compile time constant. */
-/* OBSOLETE  */
-/* OBSOLETE      Normally this is just */
-/* OBSOLETE      sub msp,msp,<msize> */
-/* OBSOLETE    */ */
-/* OBSOLETE   insn = read_memory_integer (p, 4); */
-/* OBSOLETE   if ((insn & 0xffffff00) == */
-/* OBSOLETE       (0x25000000 | (MSP_HW_REGNUM << 16) | (MSP_HW_REGNUM << 8))) */
-/* OBSOLETE     { */
-/* OBSOLETE       p += 4; */
-/* OBSOLETE       if (msize != NULL) */
-/* OBSOLETE 	*msize = insn & 0xff; */
-/* OBSOLETE     } */
-/* OBSOLETE   else */
-/* OBSOLETE     { */
-/* OBSOLETE       /* For large frames, instead of a single instruction it might */
-/* OBSOLETE          be */
-/* OBSOLETE  */
-/* OBSOLETE          const <reg>, <msize> */
-/* OBSOLETE          consth <reg>, <msize>     ; optional */
-/* OBSOLETE          sub msp,msp,<reg> */
-/* OBSOLETE        */ */
-/* OBSOLETE       int reg; */
-/* OBSOLETE       unsigned msize0; */
-/* OBSOLETE       CORE_ADDR q = p; */
-/* OBSOLETE  */
-/* OBSOLETE       if ((insn & 0xff000000) == 0x03000000) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  reg = (insn >> 8) & 0xff; */
-/* OBSOLETE 	  msize0 = ((insn >> 8) & 0xff00) | (insn & 0xff); */
-/* OBSOLETE 	  q += 4; */
-/* OBSOLETE 	  insn = read_memory_integer (q, 4); */
-/* OBSOLETE 	  /* Check for consth.  */ */
-/* OBSOLETE 	  if ((insn & 0xff000000) == 0x02000000 */
-/* OBSOLETE 	      && (insn & 0x0000ff00) == reg) */
-/* OBSOLETE 	    { */
-/* OBSOLETE 	      msize0 |= (insn << 8) & 0xff000000; */
-/* OBSOLETE 	      msize0 |= (insn << 16) & 0x00ff0000; */
-/* OBSOLETE 	      q += 4; */
-/* OBSOLETE 	      insn = read_memory_integer (q, 4); */
-/* OBSOLETE 	    } */
-/* OBSOLETE 	  /* Check for sub msp,msp,<reg>.  */ */
-/* OBSOLETE 	  if ((insn & 0xffffff00) == */
-/* OBSOLETE 	      (0x24000000 | (MSP_HW_REGNUM << 16) | (MSP_HW_REGNUM << 8)) */
-/* OBSOLETE 	      && (insn & 0xff) == reg) */
-/* OBSOLETE 	    { */
-/* OBSOLETE 	      p = q + 4; */
-/* OBSOLETE 	      if (msize != NULL) */
-/* OBSOLETE 		*msize = msize0; */
-/* OBSOLETE 	    } */
-/* OBSOLETE 	} */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   /* Next instruction might be asgeu V_SPILL,gr1,rab.   */
-/* OBSOLETE    * We don't check the vector number to allow for kernel debugging.  The  */
-/* OBSOLETE    * kernel will use a different trap number.  */
-/* OBSOLETE    * Metaware R2.3u compiler */
-/* OBSOLETE    * generates prologue that intermixes initializations and puts the asgeu */
-/* OBSOLETE    * way down after everything else. */
-/* OBSOLETE    */ */
-/* OBSOLETE   insn = read_memory_integer (p, 4); */
-/* OBSOLETE   if ((insn & 0xff00ffff) == (0x5e000100 | RAB_HW_REGNUM)) */
-/* OBSOLETE     { */
-/* OBSOLETE       p += 4; */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE done: */
-/* OBSOLETE   if (msymbol != NULL) */
-/* OBSOLETE     { */
-/* OBSOLETE       if (mi == 0) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  /* Add a new cache entry.  */ */
-/* OBSOLETE 	  mi = (struct prologue_info *) xmalloc (sizeof (struct prologue_info)); */
-/* OBSOLETE 	  msymbol->info = (char *) mi; */
-/* OBSOLETE 	  mi->rsize_valid = 0; */
-/* OBSOLETE 	  mi->msize_valid = 0; */
-/* OBSOLETE 	  mi->mfp_valid = 0; */
-/* OBSOLETE 	} */
-/* OBSOLETE       /* else, cache entry exists, but info is incomplete.  */ */
-/* OBSOLETE       mi->pc = p; */
-/* OBSOLETE       if (rsize != NULL) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  mi->rsize = *rsize; */
-/* OBSOLETE 	  mi->rsize_valid = 1; */
-/* OBSOLETE 	} */
-/* OBSOLETE       if (msize != NULL) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  mi->msize = *msize; */
-/* OBSOLETE 	  mi->msize_valid = 1; */
-/* OBSOLETE 	} */
-/* OBSOLETE       if (mfp_used != NULL) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  mi->mfp_used = *mfp_used; */
-/* OBSOLETE 	  mi->mfp_valid = 1; */
-/* OBSOLETE 	} */
-/* OBSOLETE     } */
-/* OBSOLETE   return p; */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Advance PC across any function entry prologue instructions */
-/* OBSOLETE    to reach some "real" code.  */ */
-/* OBSOLETE  */
-/* OBSOLETE CORE_ADDR */
-/* OBSOLETE a29k_skip_prologue (CORE_ADDR pc) */
-/* OBSOLETE { */
-/* OBSOLETE   return examine_prologue (pc, NULL, NULL, NULL); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* */
-/* OBSOLETE  * Examine the one or two word tag at the beginning of a function. */
-/* OBSOLETE  * The tag word is expect to be at 'p', if it is not there, we fail */
-/* OBSOLETE  * by returning 0.  The documentation for the tag word was taken from */
-/* OBSOLETE  * page 7-15 of the 29050 User's Manual.  We are assuming that the */
-/* OBSOLETE  * m bit is in bit 22 of the tag word, which seems to be the agreed upon */
-/* OBSOLETE  * convention today (1/15/92). */
-/* OBSOLETE  * msize is return in bytes. */
-/* OBSOLETE  */ */
-/* OBSOLETE  */
-/* OBSOLETE static int			/* 0/1 - failure/success of finding the tag word  */ */
-/* OBSOLETE examine_tag (CORE_ADDR p, int *is_trans, int *argcount, unsigned *msize, */
-/* OBSOLETE 	     int *mfp_used) */
-/* OBSOLETE { */
-/* OBSOLETE   unsigned int tag1, tag2; */
-/* OBSOLETE  */
-/* OBSOLETE   tag1 = read_memory_integer (p, 4); */
-/* OBSOLETE   if ((tag1 & TAGWORD_ZERO_MASK) != 0)	/* Not a tag word */ */
-/* OBSOLETE     return 0; */
-/* OBSOLETE   if (tag1 & (1 << 23))		/* A two word tag */ */
-/* OBSOLETE     { */
-/* OBSOLETE       tag2 = read_memory_integer (p - 4, 4); */
-/* OBSOLETE       if (msize) */
-/* OBSOLETE 	*msize = tag2 * 2; */
-/* OBSOLETE     } */
-/* OBSOLETE   else */
-/* OBSOLETE     /* A one word tag */ */
-/* OBSOLETE     { */
-/* OBSOLETE       if (msize) */
-/* OBSOLETE 	*msize = tag1 & 0x7ff; */
-/* OBSOLETE     } */
-/* OBSOLETE   if (is_trans) */
-/* OBSOLETE     *is_trans = ((tag1 & (1 << 21)) ? 1 : 0); */
-/* OBSOLETE   /* Note that this includes the frame pointer and the return address */
-/* OBSOLETE      register, so the actual number of registers of arguments is two less. */
-/* OBSOLETE      argcount can be zero, however, sometimes, for strange assembler */
-/* OBSOLETE      routines.  */ */
-/* OBSOLETE   if (argcount) */
-/* OBSOLETE     *argcount = (tag1 >> 16) & 0x1f; */
-/* OBSOLETE   if (mfp_used) */
-/* OBSOLETE     *mfp_used = ((tag1 & (1 << 22)) ? 1 : 0); */
-/* OBSOLETE   return 1; */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Initialize the frame.  In addition to setting "extra" frame info, */
-/* OBSOLETE    we also set ->frame because we use it in a nonstandard way, and ->pc */
-/* OBSOLETE    because we need to know it to get the other stuff.  See the diagram */
-/* OBSOLETE    of stacks and the frame cache in tm-a29k.h for more detail.  */ */
-/* OBSOLETE  */
-/* OBSOLETE static void */
-/* OBSOLETE init_frame_info (int innermost_frame, struct frame_info *frame) */
-/* OBSOLETE { */
-/* OBSOLETE   CORE_ADDR p; */
-/* OBSOLETE   long insn; */
-/* OBSOLETE   unsigned rsize; */
-/* OBSOLETE   unsigned msize; */
-/* OBSOLETE   int mfp_used, trans; */
-/* OBSOLETE   struct symbol *func; */
-/* OBSOLETE  */
-/* OBSOLETE   p = frame->pc; */
-/* OBSOLETE  */
-/* OBSOLETE   if (innermost_frame) */
-/* OBSOLETE     frame->frame = read_register (GR1_REGNUM); */
-/* OBSOLETE   else */
-/* OBSOLETE     frame->frame = frame->next->frame + frame->next->rsize; */
-/* OBSOLETE  */
-/* OBSOLETE #if 0				/* CALL_DUMMY_LOCATION == ON_STACK */ */
-/* OBSOLETE   This wont work; */
-/* OBSOLETE #else */
-/* OBSOLETE   if (PC_IN_CALL_DUMMY (p, 0, 0)) */
-/* OBSOLETE #endif */
-/* OBSOLETE     { */
-/* OBSOLETE       frame->rsize = DUMMY_FRAME_RSIZE; */
-/* OBSOLETE       /* This doesn't matter since we never try to get locals or args */
-/* OBSOLETE          from a dummy frame.  */ */
-/* OBSOLETE       frame->msize = 0; */
-/* OBSOLETE       /* Dummy frames always use a memory frame pointer.  */ */
-/* OBSOLETE       frame->saved_msp = */
-/* OBSOLETE 	read_register_stack_integer (frame->frame + DUMMY_FRAME_RSIZE - 4, 4); */
-/* OBSOLETE       frame->flags |= (TRANSPARENT_FRAME | MFP_USED); */
-/* OBSOLETE       return; */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   func = find_pc_function (p); */
-/* OBSOLETE   if (func != NULL) */
-/* OBSOLETE     p = BLOCK_START (SYMBOL_BLOCK_VALUE (func)); */
-/* OBSOLETE   else */
-/* OBSOLETE     { */
-/* OBSOLETE       /* Search backward to find the trace-back tag.  However, */
-/* OBSOLETE          do not trace back beyond the start of the text segment */
-/* OBSOLETE          (just as a sanity check to avoid going into never-never land).  */ */
-/* OBSOLETE #if 1 */
-/* OBSOLETE       while (p >= text_start */
-/* OBSOLETE 	  && ((insn = read_memory_integer (p, 4)) & TAGWORD_ZERO_MASK) != 0) */
-/* OBSOLETE 	p -= 4; */
-/* OBSOLETE #else /* 0 */ */
-/* OBSOLETE       char pat[4] = */
-/* OBSOLETE       {0, 0, 0, 0}; */
-/* OBSOLETE       char mask[4]; */
-/* OBSOLETE       char insn_raw[4]; */
-/* OBSOLETE       store_unsigned_integer (mask, 4, TAGWORD_ZERO_MASK); */
-/* OBSOLETE       /* Enable this once target_search is enabled and tested.  */ */
-/* OBSOLETE       target_search (4, pat, mask, p, -4, text_start, p + 1, &p, &insn_raw); */
-/* OBSOLETE       insn = extract_unsigned_integer (insn_raw, 4); */
-/* OBSOLETE #endif /* 0 */ */
-/* OBSOLETE  */
-/* OBSOLETE       if (p < text_start) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  /* Couldn't find the trace-back tag. */
-/* OBSOLETE 	     Something strange is going on.  */ */
-/* OBSOLETE 	  frame->saved_msp = 0; */
-/* OBSOLETE 	  frame->rsize = 0; */
-/* OBSOLETE 	  frame->msize = 0; */
-/* OBSOLETE 	  frame->flags = TRANSPARENT_FRAME; */
-/* OBSOLETE 	  return; */
-/* OBSOLETE 	} */
-/* OBSOLETE       else */
-/* OBSOLETE 	/* Advance to the first word of the function, i.e. the word */
-/* OBSOLETE 	   after the trace-back tag.  */ */
-/* OBSOLETE 	p += 4; */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   /* We've found the start of the function.   */
-/* OBSOLETE      Try looking for a tag word that indicates whether there is a */
-/* OBSOLETE      memory frame pointer and what the memory stack allocation is. */
-/* OBSOLETE      If one doesn't exist, try using a more exhaustive search of */
-/* OBSOLETE      the prologue.  */ */
-/* OBSOLETE  */
-/* OBSOLETE   if (examine_tag (p - 4, &trans, (int *) NULL, &msize, &mfp_used))	/* Found good tag */ */
-/* OBSOLETE     examine_prologue (p, &rsize, 0, 0); */
-/* OBSOLETE   else				/* No tag try prologue */ */
-/* OBSOLETE     examine_prologue (p, &rsize, &msize, &mfp_used); */
-/* OBSOLETE  */
-/* OBSOLETE   frame->rsize = rsize; */
-/* OBSOLETE   frame->msize = msize; */
-/* OBSOLETE   frame->flags = 0; */
-/* OBSOLETE   if (mfp_used) */
-/* OBSOLETE     frame->flags |= MFP_USED; */
-/* OBSOLETE   if (trans) */
-/* OBSOLETE     frame->flags |= TRANSPARENT_FRAME; */
-/* OBSOLETE   if (innermost_frame) */
-/* OBSOLETE     { */
-/* OBSOLETE       frame->saved_msp = read_register (MSP_REGNUM) + msize; */
-/* OBSOLETE     } */
-/* OBSOLETE   else */
-/* OBSOLETE     { */
-/* OBSOLETE       if (mfp_used) */
-/* OBSOLETE 	frame->saved_msp = */
-/* OBSOLETE 	  read_register_stack_integer (frame->frame + rsize - 4, 4); */
-/* OBSOLETE       else */
-/* OBSOLETE 	frame->saved_msp = frame->next->saved_msp + msize; */
-/* OBSOLETE     } */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE void */
-/* OBSOLETE init_extra_frame_info (struct frame_info *frame) */
-/* OBSOLETE { */
-/* OBSOLETE   if (frame->next == 0) */
-/* OBSOLETE     /* Assume innermost frame.  May produce strange results for "info frame" */
-/* OBSOLETE        but there isn't any way to tell the difference.  */ */
-/* OBSOLETE     init_frame_info (1, frame); */
-/* OBSOLETE   else */
-/* OBSOLETE     { */
-/* OBSOLETE       /* We're in get_prev_frame. */
-/* OBSOLETE          Take care of everything in init_frame_pc.  */ */
-/* OBSOLETE       ; */
-/* OBSOLETE     } */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE void */
-/* OBSOLETE init_frame_pc (int fromleaf, struct frame_info *frame) */
-/* OBSOLETE { */
-/* OBSOLETE   frame->pc = (fromleaf ? SAVED_PC_AFTER_CALL (frame->next) : */
-/* OBSOLETE 	       frame->next ? FRAME_SAVED_PC (frame->next) : read_pc ()); */
-/* OBSOLETE   init_frame_info (fromleaf, frame); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Local variables (i.e. LOC_LOCAL) are on the memory stack, with their */
-/* OBSOLETE    offsets being relative to the memory stack pointer (high C) or */
-/* OBSOLETE    saved_msp (gcc).  */ */
-/* OBSOLETE  */
-/* OBSOLETE CORE_ADDR */
-/* OBSOLETE frame_locals_address (struct frame_info *fi) */
-/* OBSOLETE { */
-/* OBSOLETE   if (fi->flags & MFP_USED) */
-/* OBSOLETE     return fi->saved_msp; */
-/* OBSOLETE   else */
-/* OBSOLETE     return fi->saved_msp - fi->msize; */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Routines for reading the register stack.  The caller gets to treat */
-/* OBSOLETE    the register stack as a uniform stack in memory, from address $gr1 */
-/* OBSOLETE    straight through $rfb and beyond.  */ */
-/* OBSOLETE  */
-/* OBSOLETE /* Analogous to read_memory except the length is understood to be 4. */
-/* OBSOLETE    Also, myaddr can be NULL (meaning don't bother to read), and */
-/* OBSOLETE    if actual_mem_addr is non-NULL, store there the address that it */
-/* OBSOLETE    was fetched from (or if from a register the offset within */
-/* OBSOLETE    registers).  Set *LVAL to lval_memory or lval_register, depending */
-/* OBSOLETE    on where it came from.  The contents written into MYADDR are in */
-/* OBSOLETE    target format.  */ */
-/* OBSOLETE void */
-/* OBSOLETE read_register_stack (CORE_ADDR memaddr, char *myaddr, */
-/* OBSOLETE 		     CORE_ADDR *actual_mem_addr, enum lval_type *lval) */
-/* OBSOLETE { */
-/* OBSOLETE   long rfb = read_register (RFB_REGNUM); */
-/* OBSOLETE   long rsp = read_register (RSP_REGNUM); */
-/* OBSOLETE  */
-/* OBSOLETE   /* If we don't do this 'info register' stops in the middle. */ */
-/* OBSOLETE   if (memaddr >= rstack_high_address) */
-/* OBSOLETE     { */
-/* OBSOLETE       /* a bogus value */ */
-/* OBSOLETE       static char val[] = */
-/* OBSOLETE       {~0, ~0, ~0, ~0}; */
-/* OBSOLETE       /* It's in a local register, but off the end of the stack.  */ */
-/* OBSOLETE       int regnum = (memaddr - rsp) / 4 + LR0_REGNUM; */
-/* OBSOLETE       if (myaddr != NULL) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  /* Provide bogusness */ */
-/* OBSOLETE 	  memcpy (myaddr, val, 4); */
-/* OBSOLETE 	} */
-/* OBSOLETE       supply_register (regnum, val);	/* More bogusness */ */
-/* OBSOLETE       if (lval != NULL) */
-/* OBSOLETE 	*lval = lval_register; */
-/* OBSOLETE       if (actual_mem_addr != NULL) */
-/* OBSOLETE 	*actual_mem_addr = REGISTER_BYTE (regnum); */
-/* OBSOLETE     } */
-/* OBSOLETE   /* If it's in the part of the register stack that's in real registers, */
-/* OBSOLETE      get the value from the registers.  If it's anywhere else in memory */
-/* OBSOLETE      (e.g. in another thread's saved stack), skip this part and get */
-/* OBSOLETE      it from real live memory.  */ */
-/* OBSOLETE   else if (memaddr < rfb && memaddr >= rsp) */
-/* OBSOLETE     { */
-/* OBSOLETE       /* It's in a register.  */ */
-/* OBSOLETE       int regnum = (memaddr - rsp) / 4 + LR0_REGNUM; */
-/* OBSOLETE       if (regnum > LR0_REGNUM + 127) */
-/* OBSOLETE 	error ("Attempt to read register stack out of range."); */
-/* OBSOLETE       if (myaddr != NULL) */
-/* OBSOLETE 	read_register_gen (regnum, myaddr); */
-/* OBSOLETE       if (lval != NULL) */
-/* OBSOLETE 	*lval = lval_register; */
-/* OBSOLETE       if (actual_mem_addr != NULL) */
-/* OBSOLETE 	*actual_mem_addr = REGISTER_BYTE (regnum); */
-/* OBSOLETE     } */
-/* OBSOLETE   else */
-/* OBSOLETE     { */
-/* OBSOLETE       /* It's in the memory portion of the register stack.  */ */
-/* OBSOLETE       if (myaddr != NULL) */
-/* OBSOLETE 	read_memory (memaddr, myaddr, 4); */
-/* OBSOLETE       if (lval != NULL) */
-/* OBSOLETE 	*lval = lval_memory; */
-/* OBSOLETE       if (actual_mem_addr != NULL) */
-/* OBSOLETE 	*actual_mem_addr = memaddr; */
-/* OBSOLETE     } */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Analogous to read_memory_integer */
-/* OBSOLETE    except the length is understood to be 4.  */ */
-/* OBSOLETE long */
-/* OBSOLETE read_register_stack_integer (CORE_ADDR memaddr, int len) */
-/* OBSOLETE { */
-/* OBSOLETE   char buf[4]; */
-/* OBSOLETE   read_register_stack (memaddr, buf, NULL, NULL); */
-/* OBSOLETE   return extract_signed_integer (buf, 4); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Copy 4 bytes from GDB memory at MYADDR into inferior memory */
-/* OBSOLETE    at MEMADDR and put the actual address written into in */
-/* OBSOLETE    *ACTUAL_MEM_ADDR.  */ */
-/* OBSOLETE static void */
-/* OBSOLETE write_register_stack (CORE_ADDR memaddr, char *myaddr, */
-/* OBSOLETE 		      CORE_ADDR *actual_mem_addr) */
-/* OBSOLETE { */
-/* OBSOLETE   long rfb = read_register (RFB_REGNUM); */
-/* OBSOLETE   long rsp = read_register (RSP_REGNUM); */
-/* OBSOLETE   /* If we don't do this 'info register' stops in the middle. */ */
-/* OBSOLETE   if (memaddr >= rstack_high_address) */
-/* OBSOLETE     { */
-/* OBSOLETE       /* It's in a register, but off the end of the stack.  */ */
-/* OBSOLETE       if (actual_mem_addr != NULL) */
-/* OBSOLETE 	*actual_mem_addr = 0; */
-/* OBSOLETE     } */
-/* OBSOLETE   else if (memaddr < rfb) */
-/* OBSOLETE     { */
-/* OBSOLETE       /* It's in a register.  */ */
-/* OBSOLETE       int regnum = (memaddr - rsp) / 4 + LR0_REGNUM; */
-/* OBSOLETE       if (regnum < LR0_REGNUM || regnum > LR0_REGNUM + 127) */
-/* OBSOLETE 	error ("Attempt to read register stack out of range."); */
-/* OBSOLETE       if (myaddr != NULL) */
-/* OBSOLETE 	write_register (regnum, *(long *) myaddr); */
-/* OBSOLETE       if (actual_mem_addr != NULL) */
-/* OBSOLETE 	*actual_mem_addr = 0; */
-/* OBSOLETE     } */
-/* OBSOLETE   else */
-/* OBSOLETE     { */
-/* OBSOLETE       /* It's in the memory portion of the register stack.  */ */
-/* OBSOLETE       if (myaddr != NULL) */
-/* OBSOLETE 	write_memory (memaddr, myaddr, 4); */
-/* OBSOLETE       if (actual_mem_addr != NULL) */
-/* OBSOLETE 	*actual_mem_addr = memaddr; */
-/* OBSOLETE     } */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Find register number REGNUM relative to FRAME and put its */
-/* OBSOLETE    (raw) contents in *RAW_BUFFER.  Set *OPTIMIZED if the variable */
-/* OBSOLETE    was optimized out (and thus can't be fetched).  If the variable */
-/* OBSOLETE    was fetched from memory, set *ADDRP to where it was fetched from, */
-/* OBSOLETE    otherwise it was fetched from a register. */
-/* OBSOLETE  */
-/* OBSOLETE    The argument RAW_BUFFER must point to aligned memory.  */ */
-/* OBSOLETE  */
-/* OBSOLETE void */
-/* OBSOLETE a29k_get_saved_register (char *raw_buffer, int *optimized, CORE_ADDR *addrp, */
-/* OBSOLETE 			 struct frame_info *frame, int regnum, */
-/* OBSOLETE 			 enum lval_type *lvalp) */
-/* OBSOLETE { */
-/* OBSOLETE   struct frame_info *fi; */
-/* OBSOLETE   CORE_ADDR addr; */
-/* OBSOLETE   enum lval_type lval; */
-/* OBSOLETE  */
-/* OBSOLETE   if (!target_has_registers) */
-/* OBSOLETE     error ("No registers."); */
-/* OBSOLETE  */
-/* OBSOLETE   /* Probably now redundant with the target_has_registers check.  */ */
-/* OBSOLETE   if (frame == 0) */
-/* OBSOLETE     return; */
-/* OBSOLETE  */
-/* OBSOLETE   /* Once something has a register number, it doesn't get optimized out.  */ */
-/* OBSOLETE   if (optimized != NULL) */
-/* OBSOLETE     *optimized = 0; */
-/* OBSOLETE   if (regnum == RSP_REGNUM) */
-/* OBSOLETE     { */
-/* OBSOLETE       if (raw_buffer != NULL) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  store_address (raw_buffer, REGISTER_RAW_SIZE (regnum), frame->frame); */
-/* OBSOLETE 	} */
-/* OBSOLETE       if (lvalp != NULL) */
-/* OBSOLETE 	*lvalp = not_lval; */
-/* OBSOLETE       return; */
-/* OBSOLETE     } */
-/* OBSOLETE   else if (regnum == PC_REGNUM && frame->next != NULL) */
-/* OBSOLETE     { */
-/* OBSOLETE       if (raw_buffer != NULL) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  store_address (raw_buffer, REGISTER_RAW_SIZE (regnum), frame->pc); */
-/* OBSOLETE 	} */
-/* OBSOLETE  */
-/* OBSOLETE       /* Not sure we have to do this.  */ */
-/* OBSOLETE       if (lvalp != NULL) */
-/* OBSOLETE 	*lvalp = not_lval; */
-/* OBSOLETE  */
-/* OBSOLETE       return; */
-/* OBSOLETE     } */
-/* OBSOLETE   else if (regnum == MSP_REGNUM) */
-/* OBSOLETE     { */
-/* OBSOLETE       if (raw_buffer != NULL) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  if (frame->next != NULL) */
-/* OBSOLETE 	    { */
-/* OBSOLETE 	      store_address (raw_buffer, REGISTER_RAW_SIZE (regnum), */
-/* OBSOLETE 			     frame->next->saved_msp); */
-/* OBSOLETE 	    } */
-/* OBSOLETE 	  else */
-/* OBSOLETE 	    read_register_gen (MSP_REGNUM, raw_buffer); */
-/* OBSOLETE 	} */
-/* OBSOLETE       /* The value may have been computed, not fetched.  */ */
-/* OBSOLETE       if (lvalp != NULL) */
-/* OBSOLETE 	*lvalp = not_lval; */
-/* OBSOLETE       return; */
-/* OBSOLETE     } */
-/* OBSOLETE   else if (regnum < LR0_REGNUM || regnum >= LR0_REGNUM + 128) */
-/* OBSOLETE     { */
-/* OBSOLETE       /* These registers are not saved over procedure calls, */
-/* OBSOLETE          so just print out the current values.  */ */
-/* OBSOLETE       if (raw_buffer != NULL) */
-/* OBSOLETE 	read_register_gen (regnum, raw_buffer); */
-/* OBSOLETE       if (lvalp != NULL) */
-/* OBSOLETE 	*lvalp = lval_register; */
-/* OBSOLETE       if (addrp != NULL) */
-/* OBSOLETE 	*addrp = REGISTER_BYTE (regnum); */
-/* OBSOLETE       return; */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   addr = frame->frame + (regnum - LR0_REGNUM) * 4; */
-/* OBSOLETE   if (raw_buffer != NULL) */
-/* OBSOLETE     read_register_stack (addr, raw_buffer, &addr, &lval); */
-/* OBSOLETE   if (lvalp != NULL) */
-/* OBSOLETE     *lvalp = lval; */
-/* OBSOLETE   if (addrp != NULL) */
-/* OBSOLETE     *addrp = addr; */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE  */
-/* OBSOLETE /* Discard from the stack the innermost frame, */
-/* OBSOLETE    restoring all saved registers.  */ */
-/* OBSOLETE  */
-/* OBSOLETE void */
-/* OBSOLETE pop_frame (void) */
-/* OBSOLETE { */
-/* OBSOLETE   struct frame_info *frame = get_current_frame (); */
-/* OBSOLETE   CORE_ADDR rfb = read_register (RFB_REGNUM); */
-/* OBSOLETE   CORE_ADDR gr1 = frame->frame + frame->rsize; */
-/* OBSOLETE   CORE_ADDR lr1; */
-/* OBSOLETE   CORE_ADDR original_lr0; */
-/* OBSOLETE   int must_fix_lr0 = 0; */
-/* OBSOLETE   int i; */
-/* OBSOLETE  */
-/* OBSOLETE   /* If popping a dummy frame, need to restore registers.  */ */
-/* OBSOLETE   if (PC_IN_CALL_DUMMY (read_register (PC_REGNUM), */
-/* OBSOLETE 			read_register (SP_REGNUM), */
-/* OBSOLETE 			FRAME_FP (frame))) */
-/* OBSOLETE     { */
-/* OBSOLETE       int lrnum = LR0_REGNUM + DUMMY_ARG / 4; */
-/* OBSOLETE       for (i = 0; i < DUMMY_SAVE_SR128; ++i) */
-/* OBSOLETE 	write_register (SR_REGNUM (i + 128), read_register (lrnum++)); */
-/* OBSOLETE       for (i = 0; i < DUMMY_SAVE_SR160; ++i) */
-/* OBSOLETE 	write_register (SR_REGNUM (i + 160), read_register (lrnum++)); */
-/* OBSOLETE       for (i = 0; i < DUMMY_SAVE_GREGS; ++i) */
-/* OBSOLETE 	write_register (RETURN_REGNUM + i, read_register (lrnum++)); */
-/* OBSOLETE       /* Restore the PCs and prepare to restore LR0.  */ */
-/* OBSOLETE       write_register (PC_REGNUM, read_register (lrnum++)); */
-/* OBSOLETE       write_register (NPC_REGNUM, read_register (lrnum++)); */
-/* OBSOLETE       write_register (PC2_REGNUM, read_register (lrnum++)); */
-/* OBSOLETE       original_lr0 = read_register (lrnum++); */
-/* OBSOLETE       must_fix_lr0 = 1; */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   /* Restore the memory stack pointer.  */ */
-/* OBSOLETE   write_register (MSP_REGNUM, frame->saved_msp); */
-/* OBSOLETE   /* Restore the register stack pointer.  */ */
-/* OBSOLETE   write_register (GR1_REGNUM, gr1); */
-/* OBSOLETE  */
-/* OBSOLETE   /* If we popped a dummy frame, restore lr0 now that gr1 has been restored. */ */
-/* OBSOLETE   if (must_fix_lr0) */
-/* OBSOLETE     write_register (LR0_REGNUM, original_lr0); */
-/* OBSOLETE  */
-/* OBSOLETE   /* Check whether we need to fill registers.  */ */
-/* OBSOLETE   lr1 = read_register (LR0_REGNUM + 1); */
-/* OBSOLETE   if (lr1 > rfb) */
-/* OBSOLETE     { */
-/* OBSOLETE       /* Fill.  */ */
-/* OBSOLETE       int num_bytes = lr1 - rfb; */
-/* OBSOLETE       int i; */
-/* OBSOLETE       long word; */
-/* OBSOLETE  */
-/* OBSOLETE       write_register (RAB_REGNUM, read_register (RAB_REGNUM) + num_bytes); */
-/* OBSOLETE       write_register (RFB_REGNUM, lr1); */
-/* OBSOLETE       for (i = 0; i < num_bytes; i += 4) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  /* Note: word is in host byte order.  */ */
-/* OBSOLETE 	  word = read_memory_integer (rfb + i, 4); */
-/* OBSOLETE 	  write_register (LR0_REGNUM + ((rfb - gr1) % 0x80) + i / 4, word); */
-/* OBSOLETE 	} */
-/* OBSOLETE     } */
-/* OBSOLETE   flush_cached_frames (); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Push an empty stack frame, to record the current PC, etc.  */ */
-/* OBSOLETE  */
-/* OBSOLETE void */
-/* OBSOLETE push_dummy_frame (void) */
-/* OBSOLETE { */
-/* OBSOLETE   long w; */
-/* OBSOLETE   CORE_ADDR rab, gr1; */
-/* OBSOLETE   CORE_ADDR msp = read_register (MSP_REGNUM); */
-/* OBSOLETE   int lrnum, i; */
-/* OBSOLETE   CORE_ADDR original_lr0; */
-/* OBSOLETE  */
-/* OBSOLETE   /* Read original lr0 before changing gr1.  This order isn't really needed */
-/* OBSOLETE      since GDB happens to have a snapshot of all the regs and doesn't toss */
-/* OBSOLETE      it when gr1 is changed.  But it's The Right Thing To Do.  */ */
-/* OBSOLETE   original_lr0 = read_register (LR0_REGNUM); */
-/* OBSOLETE  */
-/* OBSOLETE   /* Allocate the new frame. */ */
-/* OBSOLETE   gr1 = read_register (GR1_REGNUM) - DUMMY_FRAME_RSIZE; */
-/* OBSOLETE   write_register (GR1_REGNUM, gr1); */
-/* OBSOLETE  */
-/* OBSOLETE #ifdef VXWORKS_TARGET */
-/* OBSOLETE   /* We force re-reading all registers to get the new local registers set */
-/* OBSOLETE      after gr1 has been modified. This fix is due to the lack of single */
-/* OBSOLETE      register read/write operation in the RPC interface between VxGDB and */
-/* OBSOLETE      VxWorks. This really must be changed ! */ */
-/* OBSOLETE  */
-/* OBSOLETE   vx_read_register (-1); */
-/* OBSOLETE  */
-/* OBSOLETE #endif /* VXWORK_TARGET */ */
-/* OBSOLETE  */
-/* OBSOLETE   rab = read_register (RAB_REGNUM); */
-/* OBSOLETE   if (gr1 < rab) */
-/* OBSOLETE     { */
-/* OBSOLETE       /* We need to spill registers.  */ */
-/* OBSOLETE       int num_bytes = rab - gr1; */
-/* OBSOLETE       CORE_ADDR rfb = read_register (RFB_REGNUM); */
-/* OBSOLETE       int i; */
-/* OBSOLETE       long word; */
-/* OBSOLETE  */
-/* OBSOLETE       write_register (RFB_REGNUM, rfb - num_bytes); */
-/* OBSOLETE       write_register (RAB_REGNUM, gr1); */
-/* OBSOLETE       for (i = 0; i < num_bytes; i += 4) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  /* Note:  word is in target byte order.  */ */
-/* OBSOLETE 	  read_register_gen (LR0_REGNUM + i / 4, (char *) &word); */
-/* OBSOLETE 	  write_memory (rfb - num_bytes + i, (char *) &word, 4); */
-/* OBSOLETE 	} */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   /* There are no arguments in to the dummy frame, so we don't need */
-/* OBSOLETE      more than rsize plus the return address and lr1.  */ */
-/* OBSOLETE   write_register (LR0_REGNUM + 1, gr1 + DUMMY_FRAME_RSIZE + 2 * 4); */
-/* OBSOLETE  */
-/* OBSOLETE   /* Set the memory frame pointer.  */ */
-/* OBSOLETE   write_register (LR0_REGNUM + DUMMY_FRAME_RSIZE / 4 - 1, msp); */
-/* OBSOLETE  */
-/* OBSOLETE   /* Allocate arg_slop.  */ */
-/* OBSOLETE   write_register (MSP_REGNUM, msp - 16 * 4); */
-/* OBSOLETE  */
-/* OBSOLETE   /* Save registers.  */ */
-/* OBSOLETE   lrnum = LR0_REGNUM + DUMMY_ARG / 4; */
-/* OBSOLETE   for (i = 0; i < DUMMY_SAVE_SR128; ++i) */
-/* OBSOLETE     write_register (lrnum++, read_register (SR_REGNUM (i + 128))); */
-/* OBSOLETE   for (i = 0; i < DUMMY_SAVE_SR160; ++i) */
-/* OBSOLETE     write_register (lrnum++, read_register (SR_REGNUM (i + 160))); */
-/* OBSOLETE   for (i = 0; i < DUMMY_SAVE_GREGS; ++i) */
-/* OBSOLETE     write_register (lrnum++, read_register (RETURN_REGNUM + i)); */
-/* OBSOLETE   /* Save the PCs and LR0.  */ */
-/* OBSOLETE   write_register (lrnum++, read_register (PC_REGNUM)); */
-/* OBSOLETE   write_register (lrnum++, read_register (NPC_REGNUM)); */
-/* OBSOLETE   write_register (lrnum++, read_register (PC2_REGNUM)); */
-/* OBSOLETE  */
-/* OBSOLETE   /* Why are we saving LR0?  What would clobber it? (the dummy frame should */
-/* OBSOLETE      be below it on the register stack, no?).  */ */
-/* OBSOLETE   write_register (lrnum++, original_lr0); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE  */
-/* OBSOLETE  */
-/* OBSOLETE /* */
-/* OBSOLETE    This routine takes three arguments and makes the cached frames look */
-/* OBSOLETE    as if these arguments defined a frame on the cache.  This allows the */
-/* OBSOLETE    rest of `info frame' to extract the important arguments without much */
-/* OBSOLETE    difficulty.  Since an individual frame on the 29K is determined by */
-/* OBSOLETE    three values (FP, PC, and MSP), we really need all three to do a */
-/* OBSOLETE    good job.  */ */
-/* OBSOLETE  */
-/* OBSOLETE struct frame_info * */
-/* OBSOLETE setup_arbitrary_frame (int argc, CORE_ADDR *argv) */
-/* OBSOLETE { */
-/* OBSOLETE   struct frame_info *frame; */
-/* OBSOLETE  */
-/* OBSOLETE   if (argc != 3) */
-/* OBSOLETE     error ("AMD 29k frame specifications require three arguments: rsp pc msp"); */
-/* OBSOLETE  */
-/* OBSOLETE   frame = create_new_frame (argv[0], argv[1]); */
-/* OBSOLETE  */
-/* OBSOLETE   if (!frame) */
-/* OBSOLETE     internal_error (__FILE__, __LINE__, */
-/* OBSOLETE 		    "create_new_frame returned invalid frame id"); */
-/* OBSOLETE  */
-/* OBSOLETE   /* Creating a new frame munges the `frame' value from the current */
-/* OBSOLETE      GR1, so we restore it again here.  FIXME, untangle all this */
-/* OBSOLETE      29K frame stuff...  */ */
-/* OBSOLETE   frame->frame = argv[0]; */
-/* OBSOLETE  */
-/* OBSOLETE   /* Our MSP is in argv[2].  It'd be intelligent if we could just */
-/* OBSOLETE      save this value in the FRAME.  But the way it's set up (FIXME), */
-/* OBSOLETE      we must save our caller's MSP.  We compute that by adding our */
-/* OBSOLETE      memory stack frame size to our MSP.  */ */
-/* OBSOLETE   frame->saved_msp = argv[2] + frame->msize; */
-/* OBSOLETE  */
-/* OBSOLETE   return frame; */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE int */
-/* OBSOLETE gdb_print_insn_a29k (bfd_vma memaddr, disassemble_info *info) */
-/* OBSOLETE { */
-/* OBSOLETE   if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) */
-/* OBSOLETE     return print_insn_big_a29k (memaddr, info); */
-/* OBSOLETE   else */
-/* OBSOLETE     return print_insn_little_a29k (memaddr, info); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE enum a29k_processor_types processor_type = a29k_unknown; */
-/* OBSOLETE  */
-/* OBSOLETE void */
-/* OBSOLETE a29k_get_processor_type (void) */
-/* OBSOLETE { */
-/* OBSOLETE   unsigned int cfg_reg = (unsigned int) read_register (CFG_REGNUM); */
-/* OBSOLETE  */
-/* OBSOLETE   /* Most of these don't have freeze mode.  */ */
-/* OBSOLETE   processor_type = a29k_no_freeze_mode; */
-/* OBSOLETE  */
-/* OBSOLETE   switch ((cfg_reg >> 28) & 0xf) */
-/* OBSOLETE     { */
-/* OBSOLETE     case 0: */
-/* OBSOLETE       fprintf_filtered (gdb_stderr, "Remote debugging an Am29000"); */
-/* OBSOLETE       break; */
-/* OBSOLETE     case 1: */
-/* OBSOLETE       fprintf_filtered (gdb_stderr, "Remote debugging an Am29005"); */
-/* OBSOLETE       break; */
-/* OBSOLETE     case 2: */
-/* OBSOLETE       fprintf_filtered (gdb_stderr, "Remote debugging an Am29050"); */
-/* OBSOLETE       processor_type = a29k_freeze_mode; */
-/* OBSOLETE       break; */
-/* OBSOLETE     case 3: */
-/* OBSOLETE       fprintf_filtered (gdb_stderr, "Remote debugging an Am29035"); */
-/* OBSOLETE       break; */
-/* OBSOLETE     case 4: */
-/* OBSOLETE       fprintf_filtered (gdb_stderr, "Remote debugging an Am29030"); */
-/* OBSOLETE       break; */
-/* OBSOLETE     case 5: */
-/* OBSOLETE       fprintf_filtered (gdb_stderr, "Remote debugging an Am2920*"); */
-/* OBSOLETE       break; */
-/* OBSOLETE     case 6: */
-/* OBSOLETE       fprintf_filtered (gdb_stderr, "Remote debugging an Am2924*"); */
-/* OBSOLETE       break; */
-/* OBSOLETE     case 7: */
-/* OBSOLETE       fprintf_filtered (gdb_stderr, "Remote debugging an Am29040"); */
-/* OBSOLETE       break; */
-/* OBSOLETE     default: */
-/* OBSOLETE       fprintf_filtered (gdb_stderr, "Remote debugging an unknown Am29k\n"); */
-/* OBSOLETE       /* Don't bother to print the revision.  */ */
-/* OBSOLETE       return; */
-/* OBSOLETE     } */
-/* OBSOLETE   fprintf_filtered (gdb_stderr, " revision %c\n", 'A' + ((cfg_reg >> 24) & 0x0f)); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE #ifdef GET_LONGJMP_TARGET */
-/* OBSOLETE /* Figure out where the longjmp will land.  We expect that we have just entered */
-/* OBSOLETE    longjmp and haven't yet setup the stack frame, so the args are still in the */
-/* OBSOLETE    output regs.  lr2 (LR2_REGNUM) points at the jmp_buf structure from which we */
-/* OBSOLETE    extract the pc (JB_PC) that we will land at.  The pc is copied into ADDR. */
-/* OBSOLETE    This routine returns true on success */ */
-/* OBSOLETE  */
-/* OBSOLETE int */
-/* OBSOLETE get_longjmp_target (CORE_ADDR *pc) */
-/* OBSOLETE { */
-/* OBSOLETE   CORE_ADDR jb_addr; */
-/* OBSOLETE   char buf[sizeof (CORE_ADDR)]; */
-/* OBSOLETE  */
-/* OBSOLETE   jb_addr = read_register (LR2_REGNUM); */
-/* OBSOLETE  */
-/* OBSOLETE   if (target_read_memory (jb_addr + JB_PC * JB_ELEMENT_SIZE, (char *) buf, */
-/* OBSOLETE 			  sizeof (CORE_ADDR))) */
-/* OBSOLETE     return 0; */
-/* OBSOLETE  */
-/* OBSOLETE   *pc = extract_address ((PTR) buf, sizeof (CORE_ADDR)); */
-/* OBSOLETE   return 1; */
-/* OBSOLETE } */
-/* OBSOLETE #endif /* GET_LONGJMP_TARGET */ */
-/* OBSOLETE  */
-/* OBSOLETE void */
-/* OBSOLETE _initialize_a29k_tdep (void) */
-/* OBSOLETE { */
-/* OBSOLETE   extern CORE_ADDR text_end; */
-/* OBSOLETE  */
-/* OBSOLETE   tm_print_insn = gdb_print_insn_a29k; */
-/* OBSOLETE  */
-/* OBSOLETE   /* FIXME, there should be a way to make a CORE_ADDR variable settable. */ */
-/* OBSOLETE   add_show_from_set */
-/* OBSOLETE     (add_set_cmd ("rstack_high_address", class_support, var_uinteger, */
-/* OBSOLETE 		  (char *) &rstack_high_address, */
-/* OBSOLETE 		  "Set top address in memory of the register stack.\n\ */
-/* OBSOLETE Attempts to access registers saved above this address will be ignored\n\ */
-/* OBSOLETE or will produce the value -1.", &setlist), */
-/* OBSOLETE      &showlist); */
-/* OBSOLETE  */
-/* OBSOLETE   /* FIXME, there should be a way to make a CORE_ADDR variable settable. */ */
-/* OBSOLETE   add_show_from_set */
-/* OBSOLETE     (add_set_cmd ("call_scratch_address", class_support, var_uinteger, */
-/* OBSOLETE 		  (char *) &text_end, */
-/* OBSOLETE 		  "Set address in memory where small amounts of RAM can be used\n\ */
-/* OBSOLETE when making function calls into the inferior.", &setlist), */
-/* OBSOLETE      &showlist); */
-/* OBSOLETE } */
diff --git a/gdb/config/a29k/a29k-udi.mt b/gdb/config/a29k/a29k-udi.mt
deleted file mode 100644
index 6fe45b0..0000000
--- a/gdb/config/a29k/a29k-udi.mt
+++ /dev/null
@@ -1,5 +0,0 @@
-# OBSOLETE # Target: AMD 29000 on EB29K board over a serial line
-# OBSOLETE TDEPFILES= a29k-tdep.o remote-udi.o udip2soc.o udr.o udi2go32.o
-# OBSOLETE TM_FILE= tm-a29k.h
-# OBSOLETE 
-# OBSOLETE MT_CFLAGS = $(HOST_IPC)
diff --git a/gdb/config/a29k/a29k.mt b/gdb/config/a29k/a29k.mt
deleted file mode 100644
index b235c05..0000000
--- a/gdb/config/a29k/a29k.mt
+++ /dev/null
@@ -1,5 +0,0 @@
-# OBSOLETE # Target: AMD 29000
-# OBSOLETE TDEPFILES= a29k-tdep.o remote-eb.o remote-adapt.o
-# OBSOLETE TM_FILE= tm-a29k.h
-# OBSOLETE 
-# OBSOLETE MT_CFLAGS = -DNO_HIF_SUPPORT
diff --git a/gdb/config/a29k/tm-a29k.h b/gdb/config/a29k/tm-a29k.h
deleted file mode 100644
index c296f59..0000000
--- a/gdb/config/a29k/tm-a29k.h
+++ /dev/null
@@ -1,722 +0,0 @@
-/* OBSOLETE /* Parameters for target machine AMD 29000, for GDB, the GNU debugger. */
-/* OBSOLETE    Copyright 1990, 1991, 1993, 1994, 1995, 1996, 1998, 1999, 2000, */
-/* OBSOLETE    2001 Free Software Foundation, Inc. */
-/* OBSOLETE    Contributed by Cygnus Support.  Written by Jim Kingdon. */
-/* OBSOLETE  */
-/* OBSOLETE    This file is part of GDB. */
-/* OBSOLETE  */
-/* OBSOLETE    This program is free software; you can redistribute it and/or modify */
-/* OBSOLETE    it under the terms of the GNU General Public License as published by */
-/* OBSOLETE    the Free Software Foundation; either version 2 of the License, or */
-/* OBSOLETE    (at your option) any later version. */
-/* OBSOLETE  */
-/* OBSOLETE    This program is distributed in the hope that it will be useful, */
-/* OBSOLETE    but WITHOUT ANY WARRANTY; without even the implied warranty of */
-/* OBSOLETE    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the */
-/* OBSOLETE    GNU General Public License for more details. */
-/* OBSOLETE  */
-/* OBSOLETE    You should have received a copy of the GNU General Public License */
-/* OBSOLETE    along with this program; if not, write to the Free Software */
-/* OBSOLETE    Foundation, Inc., 59 Temple Place - Suite 330, */
-/* OBSOLETE    Boston, MA 02111-1307, USA.  */ */
-/* OBSOLETE  */
-/* OBSOLETE #include "regcache.h" */
-/* OBSOLETE  */
-/* OBSOLETE /* Parameters for an EB29K (a board which plugs into a PC and is */
-/* OBSOLETE    accessed through EBMON software running on the PC, which we */
-/* OBSOLETE    use as we'd use a remote stub (see remote-eb.c). */
-/* OBSOLETE  */
-/* OBSOLETE    If gdb is ported to other a29k machines/systems, the */
-/* OBSOLETE    machine/system-specific parts should be removed from this file (a */
-/* OBSOLETE    la tm-m68k.h).  */ */
-/* OBSOLETE  */
-/* OBSOLETE /* Byte order is configurable, but this machine runs big-endian.  */ */
-/* OBSOLETE #define TARGET_BYTE_ORDER BFD_ENDIAN_BIG */
-/* OBSOLETE  */
-/* OBSOLETE /* Floating point uses IEEE representations.  */ */
-/* OBSOLETE #define IEEE_FLOAT (1) */
-/* OBSOLETE  */
-/* OBSOLETE /* Recognize our magic number.  */ */
-/* OBSOLETE #define BADMAG(x) ((x).f_magic != 0572) */
-/* OBSOLETE  */
-/* OBSOLETE /* Offset from address of function to start of its code. */
-/* OBSOLETE    Zero on most machines.  */ */
-/* OBSOLETE  */
-/* OBSOLETE #define FUNCTION_START_OFFSET 0 */
-/* OBSOLETE  */
-/* OBSOLETE /* Advance PC across any function entry prologue instructions */
-/* OBSOLETE    to reach some "real" code.  */ */
-/* OBSOLETE  */
-/* OBSOLETE #define SKIP_PROLOGUE(pc) (a29k_skip_prologue (pc)) */
-/* OBSOLETE CORE_ADDR a29k_skip_prologue (); */
-/* OBSOLETE  */
-/* OBSOLETE /* Immediately after a function call, return the saved pc. */
-/* OBSOLETE    Can't go through the frames for this because on some machines */
-/* OBSOLETE    the new frame is not set up until the new function executes */
-/* OBSOLETE    some instructions.  */ */
-/* OBSOLETE  */
-/* OBSOLETE #define SAVED_PC_AFTER_CALL(frame) ((frame->flags & TRANSPARENT_FRAME) \ */
-/* OBSOLETE 				    ? read_register (TPC_REGNUM) \ */
-/* OBSOLETE 				    : read_register (LR0_REGNUM)) */
-/* OBSOLETE  */
-/* OBSOLETE /* Stack grows downward.  */ */
-/* OBSOLETE  */
-/* OBSOLETE #define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) */
-/* OBSOLETE  */
-/* OBSOLETE /* Stack must be aligned on 32-bit boundaries when synthesizing */
-/* OBSOLETE    function calls. */ */
-/* OBSOLETE  */
-/* OBSOLETE #define STACK_ALIGN(ADDR) (((ADDR) + 3) & ~3) */
-/* OBSOLETE  */
-/* OBSOLETE /* Sequence of bytes for breakpoint instruction.  */ */
-/* OBSOLETE /* ASNEQ 0x50, gr1, gr1 */
-/* OBSOLETE    The trap number 0x50 is chosen arbitrarily. */
-/* OBSOLETE    We let the command line (or previously included files) override this */
-/* OBSOLETE    setting.  */ */
-/* OBSOLETE #ifndef BREAKPOINT */
-/* OBSOLETE #if TARGET_BYTE_ORDER == BFD_ENDIAN_BIG */
-/* OBSOLETE #define BREAKPOINT {0x72, 0x50, 0x01, 0x01} */
-/* OBSOLETE #else /* Target is little-endian.  */ */
-/* OBSOLETE #define BREAKPOINT {0x01, 0x01, 0x50, 0x72} */
-/* OBSOLETE #endif /* Target is little-endian.  */ */
-/* OBSOLETE #endif /* BREAKPOINT */ */
-/* OBSOLETE  */
-/* OBSOLETE /* Amount PC must be decremented by after a breakpoint. */
-/* OBSOLETE    This is often the number of bytes in BREAKPOINT */
-/* OBSOLETE    but not always.  */ */
-/* OBSOLETE  */
-/* OBSOLETE #define DECR_PC_AFTER_BREAK 0 */
-/* OBSOLETE  */
-/* OBSOLETE /* Say how long (ordinary) registers are.  This is a piece of bogosity */
-/* OBSOLETE    used in push_word and a few other places; REGISTER_RAW_SIZE is the */
-/* OBSOLETE    real way to know how big a register is.  */ */
-/* OBSOLETE  */
-/* OBSOLETE #define REGISTER_SIZE 4 */
-/* OBSOLETE  */
-/* OBSOLETE /* Allow the register declarations here to be overridden for remote */
-/* OBSOLETE    kernel debugging.  */ */
-/* OBSOLETE #if !defined (REGISTER_NAMES) */
-/* OBSOLETE  */
-/* OBSOLETE /* Number of machine registers */ */
-/* OBSOLETE  */
-/* OBSOLETE #define NUM_REGS 205 */
-/* OBSOLETE  */
-/* OBSOLETE /* Initializer for an array of names of registers. */
-/* OBSOLETE    There should be NUM_REGS strings in this initializer. */
-/* OBSOLETE  */
-/* OBSOLETE    FIXME, add floating point registers and support here. */
-/* OBSOLETE  */
-/* OBSOLETE    Also note that this list does not attempt to deal with kernel */
-/* OBSOLETE    debugging (in which the first 32 registers are gr64-gr95).  */ */
-/* OBSOLETE  */
-/* OBSOLETE #define REGISTER_NAMES \ */
-/* OBSOLETE {"gr96", "gr97", "gr98", "gr99", "gr100", "gr101", "gr102", "gr103", "gr104", \ */
-/* OBSOLETE  "gr105", "gr106", "gr107", "gr108", "gr109", "gr110", "gr111", "gr112", \ */
-/* OBSOLETE  "gr113", "gr114", "gr115", "gr116", "gr117", "gr118", "gr119", "gr120", \ */
-/* OBSOLETE  "gr121", "gr122", "gr123", "gr124", "gr125", "gr126", "gr127",		 \ */
-/* OBSOLETE  "lr0", "lr1", "lr2", "lr3", "lr4", "lr5", "lr6", "lr7", "lr8", "lr9",   \ */
-/* OBSOLETE  "lr10", "lr11", "lr12", "lr13", "lr14", "lr15", "lr16", "lr17", "lr18", \ */
-/* OBSOLETE  "lr19", "lr20", "lr21", "lr22", "lr23", "lr24", "lr25", "lr26", "lr27", \ */
-/* OBSOLETE  "lr28", "lr29", "lr30", "lr31", "lr32", "lr33", "lr34", "lr35", "lr36", \ */
-/* OBSOLETE  "lr37", "lr38", "lr39", "lr40", "lr41", "lr42", "lr43", "lr44", "lr45", \ */
-/* OBSOLETE  "lr46", "lr47", "lr48", "lr49", "lr50", "lr51", "lr52", "lr53", "lr54", \ */
-/* OBSOLETE  "lr55", "lr56", "lr57", "lr58", "lr59", "lr60", "lr61", "lr62", "lr63", \ */
-/* OBSOLETE  "lr64", "lr65", "lr66", "lr67", "lr68", "lr69", "lr70", "lr71", "lr72", \ */
-/* OBSOLETE  "lr73", "lr74", "lr75", "lr76", "lr77", "lr78", "lr79", "lr80", "lr81", \ */
-/* OBSOLETE  "lr82", "lr83", "lr84", "lr85", "lr86", "lr87", "lr88", "lr89", "lr90", \ */
-/* OBSOLETE  "lr91", "lr92", "lr93", "lr94", "lr95", "lr96", "lr97", "lr98", "lr99", \ */
-/* OBSOLETE  "lr100", "lr101", "lr102", "lr103", "lr104", "lr105", "lr106", "lr107", \ */
-/* OBSOLETE  "lr108", "lr109", "lr110", "lr111", "lr112", "lr113", "lr114", "lr115", \ */
-/* OBSOLETE  "lr116", "lr117", "lr118", "lr119", "lr120", "lr121", "lr122", "lr123", \ */
-/* OBSOLETE  "lr124", "lr125", "lr126", "lr127",					 \ */
-/* OBSOLETE   "AI0", "AI1", "AI2", "AI3", "AI4", "AI5", "AI6", "AI7", "AI8", "AI9",  \ */
-/* OBSOLETE   "AI10", "AI11", "AI12", "AI13", "AI14", "AI15", "FP",			 \ */
-/* OBSOLETE   "bp", "fc", "cr", "q",						 \ */
-/* OBSOLETE   "vab", "ops", "cps", "cfg", "cha", "chd", "chc", "rbp", "tmc", "tmr",	 \ */
-/* OBSOLETE   "pc0", "pc1", "pc2", "mmu", "lru", "fpe", "inte", "fps", "exo", "gr1",  \ */
-/* OBSOLETE   "alu", "ipc", "ipa", "ipb" } */
-/* OBSOLETE  */
-/* OBSOLETE /* */
-/* OBSOLETE  * Converts an sdb register number to an internal gdb register number. */
-/* OBSOLETE  * Currently under epi, gr96->0...gr127->31...lr0->32...lr127->159, or... */
-/* OBSOLETE  *                      gr64->0...gr95->31, lr0->32...lr127->159. */
-/* OBSOLETE  */ */
-/* OBSOLETE #define SDB_REG_TO_REGNUM(value) \ */
-/* OBSOLETE   (((value) >= 96 && (value) <= 127) ? ((value) - 96) : \ */
-/* OBSOLETE    ((value) >= 128 && (value) <=  255) ? ((value) - 128 + LR0_REGNUM) : \ */
-/* OBSOLETE    (value)) */
-/* OBSOLETE  */
-/* OBSOLETE /* */
-/* OBSOLETE  * Provide the processor register numbers of some registers that are */
-/* OBSOLETE  * expected/written in instructions that might change under different */
-/* OBSOLETE  * register sets.  Namely, gcc can compile (-mkernel-registers) so that */
-/* OBSOLETE  * it uses gr64-gr95 in stead of gr96-gr127. */
-/* OBSOLETE  */ */
-/* OBSOLETE #define MSP_HW_REGNUM	125	/* gr125 */ */
-/* OBSOLETE #define RAB_HW_REGNUM	126	/* gr126 */ */
-/* OBSOLETE  */
-/* OBSOLETE /* Convert Processor Special register #x to REGISTER_NAMES register # */ */
-/* OBSOLETE #define SR_REGNUM(x) \ */
-/* OBSOLETE   ((x) < 15  ? VAB_REGNUM + (x)					 \ */
-/* OBSOLETE    : (x) >= 128 && (x) < 131 ? IPC_REGNUM + (x) - 128		 \ */
-/* OBSOLETE    : (x) == 131 ? Q_REGNUM					 \ */
-/* OBSOLETE    : (x) == 132 ? ALU_REGNUM					 \ */
-/* OBSOLETE    : (x) >= 133 && (x) < 136 ? BP_REGNUM + (x) - 133		 \ */
-/* OBSOLETE    : (x) >= 160 && (x) < 163 ? FPE_REGNUM + (x) - 160		 \ */
-/* OBSOLETE    : (x) == 164 ? EXO_REGNUM                                     \ */
-/* OBSOLETE    : (error ("Internal error in SR_REGNUM"), 0)) */
-/* OBSOLETE #define GR96_REGNUM 0 */
-/* OBSOLETE  */
-/* OBSOLETE /* Define the return register separately, so it can be overridden for */
-/* OBSOLETE    kernel procedure calling conventions. */ */
-/* OBSOLETE #define	RETURN_REGNUM	GR96_REGNUM */
-/* OBSOLETE #define GR1_REGNUM 200 */
-/* OBSOLETE /* This needs to be the memory stack pointer, not the register stack pointer, */
-/* OBSOLETE    to make call_function work right.  */ */
-/* OBSOLETE #define SP_REGNUM MSP_REGNUM */
-/* OBSOLETE #define FP_REGNUM 33		/* lr1 */ */
-/* OBSOLETE  */
-/* OBSOLETE /* Return register for transparent calling convention (gr122).  */ */
-/* OBSOLETE #define TPC_REGNUM (122 - 96 + GR96_REGNUM) */
-/* OBSOLETE  */
-/* OBSOLETE /* Large Return Pointer (gr123).  */ */
-/* OBSOLETE #define LRP_REGNUM (123 - 96 + GR96_REGNUM) */
-/* OBSOLETE  */
-/* OBSOLETE /* Static link pointer (gr124).  */ */
-/* OBSOLETE #define SLP_REGNUM (124 - 96 + GR96_REGNUM) */
-/* OBSOLETE  */
-/* OBSOLETE /* Memory Stack Pointer (gr125).  */ */
-/* OBSOLETE #define MSP_REGNUM (125 - 96 + GR96_REGNUM) */
-/* OBSOLETE  */
-/* OBSOLETE /* Register allocate bound (gr126).  */ */
-/* OBSOLETE #define RAB_REGNUM (126 - 96 + GR96_REGNUM) */
-/* OBSOLETE  */
-/* OBSOLETE /* Register Free Bound (gr127).  */ */
-/* OBSOLETE #define RFB_REGNUM (127 - 96 + GR96_REGNUM) */
-/* OBSOLETE  */
-/* OBSOLETE /* Register Stack Pointer.  */ */
-/* OBSOLETE #define RSP_REGNUM GR1_REGNUM */
-/* OBSOLETE #define LR0_REGNUM 32 */
-/* OBSOLETE #define BP_REGNUM 177 */
-/* OBSOLETE #define FC_REGNUM 178 */
-/* OBSOLETE #define CR_REGNUM 179 */
-/* OBSOLETE #define Q_REGNUM 180 */
-/* OBSOLETE #define VAB_REGNUM 181 */
-/* OBSOLETE #define OPS_REGNUM (VAB_REGNUM + 1) */
-/* OBSOLETE #define CPS_REGNUM (VAB_REGNUM + 2) */
-/* OBSOLETE #define CFG_REGNUM (VAB_REGNUM + 3) */
-/* OBSOLETE #define CHA_REGNUM (VAB_REGNUM + 4) */
-/* OBSOLETE #define CHD_REGNUM (VAB_REGNUM + 5) */
-/* OBSOLETE #define CHC_REGNUM (VAB_REGNUM + 6) */
-/* OBSOLETE #define RBP_REGNUM (VAB_REGNUM + 7) */
-/* OBSOLETE #define TMC_REGNUM (VAB_REGNUM + 8) */
-/* OBSOLETE #define TMR_REGNUM (VAB_REGNUM + 9) */
-/* OBSOLETE #define NPC_REGNUM (VAB_REGNUM + 10)	/* pc0 */ */
-/* OBSOLETE #define PC_REGNUM  (VAB_REGNUM + 11)	/* pc1 */ */
-/* OBSOLETE #define PC2_REGNUM (VAB_REGNUM + 12) */
-/* OBSOLETE #define MMU_REGNUM (VAB_REGNUM + 13) */
-/* OBSOLETE #define LRU_REGNUM (VAB_REGNUM + 14) */
-/* OBSOLETE #define FPE_REGNUM (VAB_REGNUM + 15) */
-/* OBSOLETE #define INTE_REGNUM (VAB_REGNUM + 16) */
-/* OBSOLETE #define FPS_REGNUM (VAB_REGNUM + 17) */
-/* OBSOLETE #define EXO_REGNUM (VAB_REGNUM + 18) */
-/* OBSOLETE /* gr1 is defined above as 200 = VAB_REGNUM + 19 */ */
-/* OBSOLETE #define ALU_REGNUM (VAB_REGNUM + 20) */
-/* OBSOLETE #define PS_REGNUM  ALU_REGNUM */
-/* OBSOLETE #define IPC_REGNUM (VAB_REGNUM + 21) */
-/* OBSOLETE #define IPA_REGNUM (VAB_REGNUM + 22) */
-/* OBSOLETE #define IPB_REGNUM (VAB_REGNUM + 23) */
-/* OBSOLETE  */
-/* OBSOLETE #endif /* !defined(REGISTER_NAMES) */ */
-/* OBSOLETE  */
-/* OBSOLETE /* Total amount of space needed to store our copies of the machine's */
-/* OBSOLETE    register state, the array `registers'.  */ */
-/* OBSOLETE #define REGISTER_BYTES (NUM_REGS * 4) */
-/* OBSOLETE  */
-/* OBSOLETE /* Index within `registers' of the first byte of the space for */
-/* OBSOLETE    register N.  */ */
-/* OBSOLETE #define REGISTER_BYTE(N)  ((N)*4) */
-/* OBSOLETE  */
-/* OBSOLETE /* Number of bytes of storage in the actual machine representation */
-/* OBSOLETE    for register N.  */ */
-/* OBSOLETE  */
-/* OBSOLETE /* All regs are 4 bytes.  */ */
-/* OBSOLETE  */
-/* OBSOLETE #define REGISTER_RAW_SIZE(N) (4) */
-/* OBSOLETE  */
-/* OBSOLETE /* Number of bytes of storage in the program's representation */
-/* OBSOLETE    for register N.  */ */
-/* OBSOLETE  */
-/* OBSOLETE /* All regs are 4 bytes.  */ */
-/* OBSOLETE  */
-/* OBSOLETE #define REGISTER_VIRTUAL_SIZE(N) (4) */
-/* OBSOLETE  */
-/* OBSOLETE /* Largest value REGISTER_RAW_SIZE can have.  */ */
-/* OBSOLETE  */
-/* OBSOLETE #define MAX_REGISTER_RAW_SIZE (4) */
-/* OBSOLETE  */
-/* OBSOLETE /* Largest value REGISTER_VIRTUAL_SIZE can have.  */ */
-/* OBSOLETE  */
-/* OBSOLETE #define MAX_REGISTER_VIRTUAL_SIZE (4) */
-/* OBSOLETE  */
-/* OBSOLETE /* Return the GDB type object for the "standard" data type */
-/* OBSOLETE    of data in register N.  */ */
-/* OBSOLETE  */
-/* OBSOLETE #define REGISTER_VIRTUAL_TYPE(N) \ */
-/* OBSOLETE   (((N) == PC_REGNUM || (N) == LRP_REGNUM || (N) == SLP_REGNUM         \ */
-/* OBSOLETE     || (N) == MSP_REGNUM || (N) == RAB_REGNUM || (N) == RFB_REGNUM     \ */
-/* OBSOLETE     || (N) == GR1_REGNUM || (N) == FP_REGNUM || (N) == LR0_REGNUM       \ */
-/* OBSOLETE     || (N) == NPC_REGNUM || (N) == PC2_REGNUM)                           \ */
-/* OBSOLETE    ? lookup_pointer_type (builtin_type_void) : builtin_type_int) */
-/* OBSOLETE  */
-/* OBSOLETE /* Store the address of the place in which to copy the structure the */
-/* OBSOLETE    subroutine will return.  This is called from call_function. */ */
-/* OBSOLETE /* On the a29k the LRP points to the part of the structure beyond the first */
-/* OBSOLETE    16 words.  */ */
-/* OBSOLETE #define STORE_STRUCT_RETURN(ADDR, SP) \ */
-/* OBSOLETE   write_register (LRP_REGNUM, (ADDR) + 16 * 4); */
-/* OBSOLETE  */
-/* OBSOLETE /* Should call_function allocate stack space for a struct return?  */ */
-/* OBSOLETE /* On the a29k objects over 16 words require the caller to allocate space.  */ */
-/* OBSOLETE extern use_struct_convention_fn a29k_use_struct_convention; */
-/* OBSOLETE #define USE_STRUCT_CONVENTION(gcc_p, type) a29k_use_struct_convention (gcc_p, type) */
-/* OBSOLETE  */
-/* OBSOLETE /* Extract from an array REGBUF containing the (raw) register state */
-/* OBSOLETE    a function return value of type TYPE, and copy that, in virtual format, */
-/* OBSOLETE    into VALBUF.  */ */
-/* OBSOLETE  */
-/* OBSOLETE #define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF)	      \ */
-/* OBSOLETE   {    	       	       	       	       	       	       	       	       	   \ */
-/* OBSOLETE     int reg_length = TYPE_LENGTH (TYPE);				   \ */
-/* OBSOLETE     if (reg_length > 16 * 4)						   \ */
-/* OBSOLETE       {									   \ */
-/* OBSOLETE 	reg_length = 16 * 4;						   \ */
-/* OBSOLETE 	read_memory (*((int *)(REGBUF) + LRP_REGNUM), (VALBUF) + 16 * 4,   \ */
-/* OBSOLETE 		     TYPE_LENGTH (TYPE) - 16 * 4);			   \ */
-/* OBSOLETE       }									   \ */
-/* OBSOLETE     memcpy ((VALBUF), ((int *)(REGBUF))+RETURN_REGNUM, reg_length);	   \ */
-/* OBSOLETE   } */
-/* OBSOLETE  */
-/* OBSOLETE /* Write into appropriate registers a function return value */
-/* OBSOLETE    of type TYPE, given in virtual format.  */ */
-/* OBSOLETE  */
-/* OBSOLETE #define STORE_RETURN_VALUE(TYPE,VALBUF) \ */
-/* OBSOLETE   {									  \ */
-/* OBSOLETE     int reg_length = TYPE_LENGTH (TYPE);				  \ */
-/* OBSOLETE     if (reg_length > 16 * 4)						  \ */
-/* OBSOLETE       {									  \ */
-/* OBSOLETE         reg_length = 16 * 4;						  \ */
-/* OBSOLETE         write_memory (read_register (LRP_REGNUM),			  \ */
-/* OBSOLETE 		      (char *)(VALBUF) + 16 * 4,			  \ */
-/* OBSOLETE 		      TYPE_LENGTH (TYPE) - 16 * 4);			  \ */
-/* OBSOLETE       }									  \ */
-/* OBSOLETE     write_register_bytes (REGISTER_BYTE (RETURN_REGNUM), (char *)(VALBUF),  \ */
-/* OBSOLETE 			  TYPE_LENGTH (TYPE));				  \ */
-/* OBSOLETE   } */
-/* OBSOLETE /* *INDENT-OFF* */ */
-/* OBSOLETE /* The a29k user's guide documents well what the stacks look like. */
-/* OBSOLETE    But what isn't so clear there is how this interracts with the */
-/* OBSOLETE    symbols, or with GDB. */
-/* OBSOLETE    In the following saved_msp, saved memory stack pointer (which functions */
-/* OBSOLETE    as a memory frame pointer), means either */
-/* OBSOLETE    a register containing the memory frame pointer or, in the case of */
-/* OBSOLETE    functions with fixed size memory frames (i.e. those who don't use */
-/* OBSOLETE    alloca()), the result of the calculation msp + msize. */
-/* OBSOLETE  */
-/* OBSOLETE    LOC_ARG, LOC_LOCAL - For GCC, these are relative to saved_msp. */
-/* OBSOLETE    For high C, these are relative to msp (making alloca impossible). */
-/* OBSOLETE    LOC_REGISTER, LOC_REGPARM - The register number is the number at the */
-/* OBSOLETE    time the function is running (after the prologue), or in the case */
-/* OBSOLETE    of LOC_REGPARM, may be a register number in the range 160-175. */
-/* OBSOLETE  */
-/* OBSOLETE    The compilers do things like store an argument into memory, and then put out */
-/* OBSOLETE    a LOC_ARG for it, or put it into global registers and put out a */
-/* OBSOLETE    LOC_REGPARM.  Thus is it important to execute the first line of */
-/* OBSOLETE    code (i.e. the line of the open brace, i.e. the prologue) of a function */
-/* OBSOLETE    before trying to print arguments or anything. */
-/* OBSOLETE  */
-/* OBSOLETE    The following diagram attempts to depict what is going on in memory */
-/* OBSOLETE    (see also the _a29k user's guide_) and also how that interacts with */
-/* OBSOLETE    GDB frames.  We arbitrarily pick fci->frame to point the same place */
-/* OBSOLETE    as the register stack pointer; since we set it ourself in */
-/* OBSOLETE    INIT_EXTRA_FRAME_INFO, and access it only through the FRAME_* */
-/* OBSOLETE    macros, it doesn't really matter exactly how we */
-/* OBSOLETE    do it.  However, note that FRAME_FP is used in two ways in GDB: */
-/* OBSOLETE    (1) as a "magic cookie" which uniquely identifies frames (even over */
-/* OBSOLETE    calls to the inferior), (2) (in PC_IN_CALL_DUMMY [ON_STACK]) */
-/* OBSOLETE    as the value of SP_REGNUM before the dummy frame was pushed.  These */
-/* OBSOLETE    two meanings would be incompatible for the a29k if we defined */
-/* OBSOLETE    CALL_DUMMY_LOCATION == ON_STACK (but we don't, so don't worry about it). */
-/* OBSOLETE    Also note that "lr1" below, while called a frame pointer */
-/* OBSOLETE    in the user's guide, has only one function:  To determine whether */
-/* OBSOLETE    registers need to be filled in the function epilogue. */
-/* OBSOLETE  */
-/* OBSOLETE    Consider the code: */
-/* OBSOLETE    < call bar> */
-/* OBSOLETE    loc1: . . . */
-/* OBSOLETE    bar:  sub gr1,gr1,rsize_b */
-/* OBSOLETE    . . . */
-/* OBSOLETE    add mfp,msp,0 */
-/* OBSOLETE    sub msp,msp,msize_b */
-/* OBSOLETE    . . . */
-/* OBSOLETE    < call foo > */
-/* OBSOLETE    loc2: . . . */
-/* OBSOLETE    foo:  sub gr1,gr1,rsize_f */
-/* OBSOLETE    . . . */
-/* OBSOLETE    add mfp,msp,0 */
-/* OBSOLETE    sub msp,msp,msize_f */
-/* OBSOLETE    . . . */
-/* OBSOLETE    loc3: < suppose the inferior stops here > */
-/* OBSOLETE  */
-/* OBSOLETE    memory stack      register stack */
-/* OBSOLETE    |           |     |____________| */
-/* OBSOLETE    |           |     |____loc1____| */
-/* OBSOLETE    +------->|___________|     |            |   ^ */
-/* OBSOLETE    |        | ^         |     |  locals_b  |   | */
-/* OBSOLETE    |        | |         |     |____________|   | */
-/* OBSOLETE    |        | |         |     |            |   | rsize_b */
-/* OBSOLETE    |        | | msize_b |     | args_to_f  |   | */
-/* OBSOLETE    |        | |         |     |____________|   | */
-/* OBSOLETE    |        | |         |     |____lr1_____|   V */
-/* OBSOLETE    |        | V         |     |____loc2____|<----------------+ */
-/* OBSOLETE    |   +--->|___________|<---------mfp     |   ^             | */
-/* OBSOLETE    |   |    | ^         |     |  locals_f  |   |             | */
-/* OBSOLETE    |   |    | | msize_f |     |____________|   |             | */
-/* OBSOLETE    |   |    | |         |     |            |   | rsize_f     | */
-/* OBSOLETE    |   |    | V         |     |   args     |   |             | */
-/* OBSOLETE    |   |    |___________|<msp |____________|   |             | */
-/* OBSOLETE    |   |                      |_____lr1____|   V             | */
-/* OBSOLETE    |   |                      |___garbage__| <- gr1 <----+   | */
-/* OBSOLETE    |   |                                                |   | */
-/* OBSOLETE    |   |                                                |   | */
-/* OBSOLETE    |   |                             pc=loc3                    |   | */
-/* OBSOLETE    |   |                                                |   | */
-/* OBSOLETE    |   |                                                |   | */
-/* OBSOLETE    |   |            frame cache                         |   | */
-/* OBSOLETE    |   |       |_________________|                      |   | */
-/* OBSOLETE    |   |       |rsize=rsize_b    |                      |   | */
-/* OBSOLETE    |   |       |msize=msize_b    |                      |   | */
-/* OBSOLETE    +---|--------saved_msp        |                      |   | */
-/* OBSOLETE    |       |frame------------------------------------|---+ */
-/* OBSOLETE    |       |pc=loc2          |                       | */
-/* OBSOLETE    |       |_________________|                       | */
-/* OBSOLETE    |       |rsize=rsize_f    |                       | */
-/* OBSOLETE    |       |msize=msize_f    |                       | */
-/* OBSOLETE    +--------saved_msp        |                       | */
-/* OBSOLETE    |frame------------------------------------+ */
-/* OBSOLETE    |pc=loc3          | */
-/* OBSOLETE    |_________________| */
-/* OBSOLETE  */
-/* OBSOLETE    So, is that sufficiently confusing?  Welcome to the 29000. */
-/* OBSOLETE    Notes: */
-/* OBSOLETE    * The frame for foo uses a memory frame pointer but the frame for */
-/* OBSOLETE    bar does not.  In the latter case the saved_msp is */
-/* OBSOLETE    computed by adding msize to the saved_msp of the */
-/* OBSOLETE    next frame. */
-/* OBSOLETE    * msize is in the frame cache only for high C's sake.  */ */
-/* OBSOLETE /* *INDENT-ON* */ */
-/* OBSOLETE  */
-/* OBSOLETE  */
-/* OBSOLETE void read_register_stack (); */
-/* OBSOLETE long read_register_stack_integer (); */
-/* OBSOLETE  */
-/* OBSOLETE #define FRAME_INIT_SAVED_REGS(fi)	/*no-op */ */
-/* OBSOLETE  */
-/* OBSOLETE #define EXTRA_FRAME_INFO  \ */
-/* OBSOLETE   CORE_ADDR saved_msp;    \ */
-/* OBSOLETE   unsigned int rsize;     \ */
-/* OBSOLETE   unsigned int msize;	  \ */
-/* OBSOLETE   unsigned char flags; */
-/* OBSOLETE  */
-/* OBSOLETE /* Bits for flags in EXTRA_FRAME_INFO */ */
-/* OBSOLETE #define TRANSPARENT_FRAME	0x1	/* This is a transparent frame */ */
-/* OBSOLETE #define MFP_USED		0x2	/* A memory frame pointer is used */ */
-/* OBSOLETE  */
-/* OBSOLETE /* Because INIT_FRAME_PC gets passed fromleaf, that's where we init */
-/* OBSOLETE    not only ->pc and ->frame, but all the extra stuff, when called from */
-/* OBSOLETE    get_prev_frame, that is.  */ */
-/* OBSOLETE #define INIT_EXTRA_FRAME_INFO(fromleaf, fci)  init_extra_frame_info(fci) */
-/* OBSOLETE void init_extra_frame_info (); */
-/* OBSOLETE  */
-/* OBSOLETE #define INIT_FRAME_PC(fromleaf, fci) init_frame_pc(fromleaf, fci) */
-/* OBSOLETE void init_frame_pc (); */
-/* OBSOLETE  */
-/* OBSOLETE  */
-/* OBSOLETE /* FRAME_CHAIN takes a FRAME */
-/* OBSOLETE    and produces the frame's chain-pointer. */
-/* OBSOLETE  */
-/* OBSOLETE    However, if FRAME_CHAIN_VALID returns zero, */
-/* OBSOLETE    it means the given frame is the outermost one and has no caller.  */ */
-/* OBSOLETE  */
-/* OBSOLETE /* On the a29k, the nominal address of a frame is the address on the */
-/* OBSOLETE    register stack of the return address (the one next to the incoming */
-/* OBSOLETE    arguments, not down at the bottom so nominal address == stack pointer). */
-/* OBSOLETE  */
-/* OBSOLETE    GDB expects "nominal address" to equal contents of FP_REGNUM, */
-/* OBSOLETE    at least when it comes time to create the innermost frame. */
-/* OBSOLETE    However, that doesn't work for us, so when creating the innermost */
-/* OBSOLETE    frame we set ->frame ourselves in INIT_EXTRA_FRAME_INFO.  */ */
-/* OBSOLETE  */
-/* OBSOLETE /* These are mostly dummies for the a29k because INIT_FRAME_PC */
-/* OBSOLETE    sets prev->frame instead.  */ */
-/* OBSOLETE /* If rsize is zero, we must be at end of stack (or otherwise hosed). */
-/* OBSOLETE    If we don't check rsize, we loop forever if we see rsize == 0.  */ */
-/* OBSOLETE #define FRAME_CHAIN(thisframe) \ */
-/* OBSOLETE   ((thisframe)->rsize == 0 \ */
-/* OBSOLETE    ? 0 \ */
-/* OBSOLETE    : (thisframe)->frame + (thisframe)->rsize) */
-/* OBSOLETE  */
-/* OBSOLETE /* Determine if the frame has a 'previous' and back-traceable frame. */ */
-/* OBSOLETE #define FRAME_IS_UNCHAINED(frame)	((frame)->flags & TRANSPARENT_FRAME) */
-/* OBSOLETE  */
-/* OBSOLETE /* Find the previous frame of a transparent routine. */
-/* OBSOLETE  * For now lets not try and trace through a transparent routine (we might  */
-/* OBSOLETE  * have to assume that all transparent routines are traps). */
-/* OBSOLETE  */ */
-/* OBSOLETE #define FIND_PREV_UNCHAINED_FRAME(frame)	0 */
-/* OBSOLETE  */
-/* OBSOLETE /* Define other aspects of the stack frame.  */ */
-/* OBSOLETE  */
-/* OBSOLETE /* An expression that tells us whether the function invocation represented */
-/* OBSOLETE    by FI does not have a frame on the stack associated with it. */ */
-/* OBSOLETE #define FRAMELESS_FUNCTION_INVOCATION(FI) \ */
-/* OBSOLETE   (frameless_look_for_prologue (FI)) */
-/* OBSOLETE  */
-/* OBSOLETE /* Saved pc (i.e. return address).  */ */
-/* OBSOLETE #define FRAME_SAVED_PC(fraim) \ */
-/* OBSOLETE   (read_register_stack_integer ((fraim)->frame + (fraim)->rsize, 4)) */
-/* OBSOLETE  */
-/* OBSOLETE /* Local variables (i.e. LOC_LOCAL) are on the memory stack, with their */
-/* OBSOLETE    offsets being relative to the memory stack pointer (high C) or */
-/* OBSOLETE    saved_msp (gcc).  */ */
-/* OBSOLETE  */
-/* OBSOLETE #define FRAME_LOCALS_ADDRESS(fi) frame_locals_address (fi) */
-/* OBSOLETE extern CORE_ADDR frame_locals_address (); */
-/* OBSOLETE  */
-/* OBSOLETE /* Return number of args passed to a frame. */
-/* OBSOLETE    Can return -1, meaning no way to tell.  */ */
-/* OBSOLETE /* We tried going to the effort of finding the tags word and getting */
-/* OBSOLETE    the argcount field from it, to support debugging assembler code. */
-/* OBSOLETE    Problem was, the "argcount" field never did hold the argument */
-/* OBSOLETE    count.  */ */
-/* OBSOLETE #define	FRAME_NUM_ARGS(fi) (-1) */
-/* OBSOLETE  */
-/* OBSOLETE #define FRAME_ARGS_ADDRESS(fi) FRAME_LOCALS_ADDRESS (fi) */
-/* OBSOLETE  */
-/* OBSOLETE /* Return number of bytes at start of arglist that are not really args.  */ */
-/* OBSOLETE  */
-/* OBSOLETE #define FRAME_ARGS_SKIP 0 */
-/* OBSOLETE  */
-/* OBSOLETE /* Provide our own get_saved_register.  HAVE_REGISTER_WINDOWS is insufficient */
-/* OBSOLETE    because registers get renumbered on the a29k without getting saved.  */ */
-/* OBSOLETE  */
-/* OBSOLETE struct frame_info; */
-/* OBSOLETE void a29k_get_saved_register (char *raw_buffer, int *optimized, */
-/* OBSOLETE 			      CORE_ADDR * addrp, struct frame_info *frame, */
-/* OBSOLETE 			      int regnum, enum lval_type *lvalp); */
-/* OBSOLETE #define GET_SAVED_REGISTER(raw_buffer, optimized, addrp, frame, regnum, lval) \ */
-/* OBSOLETE       a29k_get_saved_register (raw_buffer, optimized, addrp, frame, regnum, lval) */
-/* OBSOLETE  */
-/* OBSOLETE /* Call function stuff.  */ */
-/* OBSOLETE /* *INDENT-OFF* */ */
-/* OBSOLETE /* The dummy frame looks like this (see also the general frame picture */
-/* OBSOLETE    above): */
-/* OBSOLETE  */
-/* OBSOLETE 					register stack */
-/* OBSOLETE  */
-/* OBSOLETE 	                	      |                |  frame for function */
-/* OBSOLETE                	                      |   locals_sproc |  executing at time */
-/* OBSOLETE                                       |________________|  of call_function. */
-/* OBSOLETE                      		      |	               |  We must not disturb */
-/* OBSOLETE                      		      |	args_out_sproc |  it. */
-/* OBSOLETE         memory stack 		      |________________| */
-/* OBSOLETE                      		      |____lr1_sproc___|<-+ */
-/* OBSOLETE        |            |		      |__retaddr_sproc_|  | <-- gr1 (at start) */
-/* OBSOLETE        |____________|<-msp 0 <-----------mfp_dummy_____|  | */
-/* OBSOLETE        |            |  (at start)     |  save regs     |  | */
-/* OBSOLETE        | arg_slop   |		      |  pc0,pc1       |  | */
-/* OBSOLETE        |            |		      |  pc2,lr0 sproc |  | */
-/* OBSOLETE        | (16 words) |		      | gr96-gr124     |  | */
-/* OBSOLETE        |____________|<-msp 1--after   | sr160-sr162    |  | */
-/* OBSOLETE        |            | PUSH_DUMMY_FRAME| sr128-sr135    |  | */
-/* OBSOLETE        | struct ret |                 |________________|  | */
-/* OBSOLETE        | 17+        |                 |                |  |  */
-/* OBSOLETE        |____________|<- lrp           | args_out_dummy |  | */
-/* OBSOLETE        | struct ret |		      |  (16 words)    |  | */
-/* OBSOLETE        | 16         |		      |________________|  | */
-/* OBSOLETE        | (16 words) |                 |____lr1_dummy___|--+ */
-/* OBSOLETE        |____________|<- msp 2--after  |_retaddr_dummy__|<- gr1 after */
-/* OBSOLETE        |            | struct ret      |                |   PUSH_DUMMY_FRAME */
-/* OBSOLETE        | margs17+   | area allocated  |  locals_inf    | */
-/* OBSOLETE        |            |                 |________________|    called */
-/* OBSOLETE        |____________|<- msp 4--when   |                |    function's */
-/* OBSOLETE        |            |   inf called    | args_out_inf   |    frame (set up */
-/* OBSOLETE        | margs16    |                 |________________|    by called */
-/* OBSOLETE        | (16 words) |                 |_____lr1_inf____|    function). */
-/* OBSOLETE        |____________|<- msp 3--after  |       .        | */
-/* OBSOLETE        |            |   args pushed   |       .        | */
-/* OBSOLETE        |            |	              |       .        | */
-/* OBSOLETE                                       |                | */
-/* OBSOLETE  */
-/* OBSOLETE    arg_slop: This area is so that when the call dummy adds 16 words to */
-/* OBSOLETE       the msp, it won't end up larger than mfp_dummy (it is needed in the */
-/* OBSOLETE       case where margs and struct_ret do not add up to at least 16 words). */
-/* OBSOLETE    struct ret:  This area is allocated by GDB if the return value is more */
-/* OBSOLETE       than 16 words.  struct ret_16 is not used on the a29k. */
-/* OBSOLETE    margs:  Pushed by GDB.  The call dummy copies the first 16 words to */
-/* OBSOLETE       args_out_dummy. */
-/* OBSOLETE    retaddr_sproc:  Contains the PC at the time we call the function. */
-/* OBSOLETE       set by PUSH_DUMMY_FRAME and read by POP_FRAME. */
-/* OBSOLETE    retaddr_dummy:  This points to a breakpoint instruction in the dummy.  */ */
-/* OBSOLETE /* *INDENT-ON* */ */
-/* OBSOLETE  */
-/* OBSOLETE  */
-/* OBSOLETE  */
-/* OBSOLETE /* Rsize for dummy frame, in bytes.  */ */
-/* OBSOLETE  */
-/* OBSOLETE /* Bytes for outgoing args, lr1, and retaddr.  */ */
-/* OBSOLETE #define DUMMY_ARG (2 * 4 + 16 * 4) */
-/* OBSOLETE  */
-/* OBSOLETE /* Number of special registers (sr128-) to save.  */ */
-/* OBSOLETE #define DUMMY_SAVE_SR128 8 */
-/* OBSOLETE /* Number of special registers (sr160-) to save.  */ */
-/* OBSOLETE #define DUMMY_SAVE_SR160 3 */
-/* OBSOLETE /* Number of general (gr96- or gr64-) registers to save.  */ */
-/* OBSOLETE #define DUMMY_SAVE_GREGS 29 */
-/* OBSOLETE  */
-/* OBSOLETE #define DUMMY_FRAME_RSIZE \ */
-/* OBSOLETE (4 /* mfp_dummy */     	  \ */
-/* OBSOLETE  + 4 * 4  /* pc0, pc1, pc2, lr0 */  \ */
-/* OBSOLETE  + DUMMY_SAVE_GREGS * 4   \ */
-/* OBSOLETE  + DUMMY_SAVE_SR160 * 4	  \ */
-/* OBSOLETE  + DUMMY_SAVE_SR128 * 4	  \ */
-/* OBSOLETE  + DUMMY_ARG		  \ */
-/* OBSOLETE  + 4 /* pad to doubleword */ ) */
-/* OBSOLETE  */
-/* OBSOLETE /* Push an empty stack frame, to record the current PC, etc.  */ */
-/* OBSOLETE  */
-/* OBSOLETE #define PUSH_DUMMY_FRAME push_dummy_frame() */
-/* OBSOLETE extern void push_dummy_frame (); */
-/* OBSOLETE  */
-/* OBSOLETE /* Discard from the stack the innermost frame, */
-/* OBSOLETE    restoring all saved registers.  */ */
-/* OBSOLETE  */
-/* OBSOLETE #define POP_FRAME pop_frame() */
-/* OBSOLETE extern void pop_frame (); */
-/* OBSOLETE  */
-/* OBSOLETE /* This sequence of words is the instructions */
-/* OBSOLETE    mtsrim cr, 15 */
-/* OBSOLETE    loadm 0, 0, lr2, msp     ; load first 16 words of arguments into registers */
-/* OBSOLETE    add msp, msp, 16 * 4     ; point to the remaining arguments */
-/* OBSOLETE    CONST_INSN: */
-/* OBSOLETE    const lr0,inf                ; (replaced by       half of target addr) */
-/* OBSOLETE    consth lr0,inf               ; (replaced by other half of target addr) */
-/* OBSOLETE    calli lr0, lr0  */
-/* OBSOLETE    aseq 0x40,gr1,gr1   ; nop */
-/* OBSOLETE    BREAKPT_INSN: */
-/* OBSOLETE    asneq 0x50,gr1,gr1  ; breakpoint     (replaced by local breakpoint insn) */
-/* OBSOLETE  */ */
-/* OBSOLETE  */
-/* OBSOLETE #error "This file is broken.  GDB does not define HOST_BYTE_ORDER." */
-/* OBSOLETE #if TARGET_BYTE_ORDER == HOST_BYTE_ORDER */
-/* OBSOLETE #define BS(const)	const */
-/* OBSOLETE #else */
-/* OBSOLETE #define	BS(const)	(((const) & 0xff) << 24) |	\ */
-/* OBSOLETE 			(((const) & 0xff00) << 8) |	\ */
-/* OBSOLETE 			(((const) & 0xff0000) >> 8) |	\ */
-/* OBSOLETE 			(((const) & 0xff000000) >> 24) */
-/* OBSOLETE #endif */
-/* OBSOLETE  */
-/* OBSOLETE /* Position of the "const" and blkt instructions within CALL_DUMMY in bytes. */ */
-/* OBSOLETE #define CONST_INSN (3 * 4) */
-/* OBSOLETE #define BREAKPT_INSN (7 * 4) */
-/* OBSOLETE #define CALL_DUMMY {	\ */
-/* OBSOLETE 		BS(0x0400870f),\ */
-/* OBSOLETE 		BS(0x36008200|(MSP_HW_REGNUM)), \ */
-/* OBSOLETE 		BS(0x15000040|(MSP_HW_REGNUM<<8)|(MSP_HW_REGNUM<<16)), \ */
-/* OBSOLETE 		BS(0x03ff80ff),	\ */
-/* OBSOLETE 		BS(0x02ff80ff),	\ */
-/* OBSOLETE 		BS(0xc8008080),	\ */
-/* OBSOLETE 		BS(0x70400101),	\ */
-/* OBSOLETE 		BS(0x72500101)} */
-/* OBSOLETE #define CALL_DUMMY_LENGTH (8 * 4) */
-/* OBSOLETE  */
-/* OBSOLETE #define CALL_DUMMY_START_OFFSET 0	/* Start execution at beginning of dummy */ */
-/* OBSOLETE  */
-/* OBSOLETE /* Helper macro for FIX_CALL_DUMMY.  WORDP is a long * which points to a */
-/* OBSOLETE    word in target byte order; bits 0-7 and 16-23 of *WORDP are replaced with */
-/* OBSOLETE    bits 0-7 and 8-15 of DATA (which is in host byte order).  */ */
-/* OBSOLETE  */
-/* OBSOLETE #if TARGET_BYTE_ORDER == BFD_ENDIAN_BIG */
-/* OBSOLETE #define STUFF_I16(WORDP, DATA) \ */
-/* OBSOLETE   { \ */
-/* OBSOLETE     *((char *)(WORDP) + 3) = ((DATA) & 0xff);\ */
-/* OBSOLETE     *((char *)(WORDP) + 1) = (((DATA) >> 8) & 0xff);\ */
-/* OBSOLETE   } */
-/* OBSOLETE #else /* Target is little endian.  */ */
-/* OBSOLETE #define STUFF_I16(WORDP, DATA) \ */
-/* OBSOLETE   { */
-/* OBSOLETE *(char *) (WORDP) = ((DATA) & 0xff); */
-/* OBSOLETE *((char *) (WORDP) + 2) = (((DATA) >> 8) & 0xff); */
-/* OBSOLETE } */
-/* OBSOLETE #endif /* Target is little endian.  */ */
-/* OBSOLETE  */
-/* OBSOLETE /* Insert the specified number of args and function address */
-/* OBSOLETE    into a call sequence of the above form stored at DUMMYNAME.  */ */
-/* OBSOLETE  */
-/* OBSOLETE /* Currently this stuffs in the address of the function that we are calling. */
-/* OBSOLETE    Since different a29k systems use different breakpoint instructions, it */
-/* OBSOLETE    also stuffs BREAKPOINT in the right place (to avoid having to */
-/* OBSOLETE    duplicate CALL_DUMMY in each tm-*.h file).  */ */
-/* OBSOLETE  */
-/* OBSOLETE #define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p)   \ */
-/* OBSOLETE   {\ */
-/* OBSOLETE     STUFF_I16((char *)dummyname + CONST_INSN, fun);		\ */
-/* OBSOLETE     STUFF_I16((char *)dummyname + CONST_INSN + 4, fun >> 16);	\ */
-/* OBSOLETE   /* FIXME  memcpy ((char *)(dummyname) + BREAKPT_INSN, break_insn, 4); */ \ */
-/* OBSOLETE   } */
-/* OBSOLETE  */
-/* OBSOLETE /* a29k architecture has separate data & instruction memories -- wired to */
-/* OBSOLETE    different pins on the chip -- and can't execute the data memory. */
-/* OBSOLETE    Also, there should be space after text_end; */
-/* OBSOLETE    we won't get a SIGSEGV or scribble on data space.  */ */
-/* OBSOLETE  */
-/* OBSOLETE #define CALL_DUMMY_LOCATION AFTER_TEXT_END */
-/* OBSOLETE  */
-/* OBSOLETE /* Because of this, we need (as a kludge) to know the addresses of the */
-/* OBSOLETE    text section.  */ */
-/* OBSOLETE  */
-/* OBSOLETE #define	NEED_TEXT_START_END 1 */
-/* OBSOLETE  */
-/* OBSOLETE /* How to translate register numbers in the .stab's into gdb's internal register */
-/* OBSOLETE    numbers.  We don't translate them, but we warn if an invalid register */
-/* OBSOLETE    number is seen.  Note that FIXME, we use the value "sym" as an implicit */
-/* OBSOLETE    argument in printing the error message.  It happens to be available where */
-/* OBSOLETE    this macro is used.  (This macro definition appeared in a late revision */
-/* OBSOLETE    of gdb-3.91.6 and is not well tested.  Also, it should be a "complaint".) */ */
-/* OBSOLETE  */
-/* OBSOLETE #define	STAB_REG_TO_REGNUM(num) \ */
-/* OBSOLETE 	(((num) > LR0_REGNUM + 127) \ */
-/* OBSOLETE 	   ? fprintf(stderr, 	\ */
-/* OBSOLETE 		"Invalid register number %d in symbol table entry for %s\n", \ */
-/* OBSOLETE 	         (num), SYMBOL_SOURCE_NAME (sym)), (num)	\ */
-/* OBSOLETE 	   : (num)) */
-/* OBSOLETE  */
-/* OBSOLETE extern enum a29k_processor_types */
-/* OBSOLETE { */
-/* OBSOLETE   a29k_unknown, */
-/* OBSOLETE  */
-/* OBSOLETE   /* Bit 0x400 of the CPS does *not* identify freeze mode, i.e. 29000, */
-/* OBSOLETE      29030, etc.  */ */
-/* OBSOLETE   a29k_no_freeze_mode, */
-/* OBSOLETE  */
-/* OBSOLETE   /* Bit 0x400 of the CPS does identify freeze mode, i.e. 29050.  */ */
-/* OBSOLETE   a29k_freeze_mode */
-/* OBSOLETE } */
-/* OBSOLETE processor_type; */
-/* OBSOLETE  */
-/* OBSOLETE /* We need three arguments for a general frame specification for the */
-/* OBSOLETE    "frame" or "info frame" command.  */ */
-/* OBSOLETE  */
-/* OBSOLETE #define SETUP_ARBITRARY_FRAME(argc, argv) setup_arbitrary_frame (argc, argv) */
-/* OBSOLETE extern struct frame_info *setup_arbitrary_frame (int, CORE_ADDR *); */
diff --git a/gdb/config/a29k/tm-vx29k.h b/gdb/config/a29k/tm-vx29k.h
deleted file mode 100644
index 40c6689..0000000
--- a/gdb/config/a29k/tm-vx29k.h
+++ /dev/null
@@ -1,230 +0,0 @@
-/* OBSOLETE /* Target machine description for VxWorks on the 29k, for GDB, the GNU debugger. */
-/* OBSOLETE    Copyright 1994, 1995, 1998, 1999, 2000 Free Software Foundation, Inc. */
-/* OBSOLETE    Contributed by Cygnus Support. */
-/* OBSOLETE  */
-/* OBSOLETE    This file is part of GDB. */
-/* OBSOLETE  */
-/* OBSOLETE    This program is free software; you can redistribute it and/or modify */
-/* OBSOLETE    it under the terms of the GNU General Public License as published by */
-/* OBSOLETE    the Free Software Foundation; either version 2 of the License, or */
-/* OBSOLETE    (at your option) any later version. */
-/* OBSOLETE  */
-/* OBSOLETE    This program is distributed in the hope that it will be useful, */
-/* OBSOLETE    but WITHOUT ANY WARRANTY; without even the implied warranty of */
-/* OBSOLETE    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the */
-/* OBSOLETE    GNU General Public License for more details. */
-/* OBSOLETE  */
-/* OBSOLETE    You should have received a copy of the GNU General Public License */
-/* OBSOLETE    along with this program; if not, write to the Free Software */
-/* OBSOLETE    Foundation, Inc., 59 Temple Place - Suite 330, */
-/* OBSOLETE    Boston, MA 02111-1307, USA.  */ */
-/* OBSOLETE  */
-/* OBSOLETE #include "regcache.h" */
-/* OBSOLETE #include "value.h" */
-/* OBSOLETE #include "a29k/tm-a29k.h" */
-/* OBSOLETE #include "tm-vxworks.h" */
-/* OBSOLETE  */
-/* OBSOLETE /* Number of registers in a ptrace_getregs call. */ */
-/* OBSOLETE  */
-/* OBSOLETE #define VX_NUM_REGS (NUM_REGS) */
-/* OBSOLETE  */
-/* OBSOLETE /* Number of registers in a ptrace_getfpregs call. */ */
-/* OBSOLETE  */
-/* OBSOLETE /* #define VX_SIZE_FPREGS */ */
-/* OBSOLETE  */
-/* OBSOLETE /* This is almost certainly the wrong place for this: */ */
-/* OBSOLETE #define LR2_REGNUM 34 */
-/* OBSOLETE  */
-/* OBSOLETE  */
-/* OBSOLETE /* Vxworks has its own CALL_DUMMY since it manages breakpoints in the kernel */ */
-/* OBSOLETE  */
-/* OBSOLETE #undef CALL_DUMMY */
-/* OBSOLETE  */
-/* OBSOLETE /* Replace the breakpoint instruction in the CALL_DUMMY with a nop. */
-/* OBSOLETE    For Vxworks, the breakpoint is set and deleted by calls to */
-/* OBSOLETE    CALL_DUMMY_BREAK_SET and CALL_DUMMY_BREAK_DELETE.  */ */
-/* OBSOLETE  */
-/* OBSOLETE #error "This file is broken.  GDB does not define HOST_BYTE_ORDER." */
-/* OBSOLETE #if TARGET_BYTE_ORDER == HOST_BYTE_ORDER */
-/* OBSOLETE #define CALL_DUMMY {0x0400870f,\ */
-/* OBSOLETE 		0x36008200|(MSP_HW_REGNUM), \ */
-/* OBSOLETE 		0x15000040|(MSP_HW_REGNUM<<8)|(MSP_HW_REGNUM<<16), \ */
-/* OBSOLETE 		0x03ff80ff, 0x02ff80ff, 0xc8008080, 0x70400101, 0x70400101} */
-/* OBSOLETE #else /* Byte order differs.  */ */
-/* OBSOLETE #define CALL_DUMMY {0x0f870004,\ */
-/* OBSOLETE 		0x00820036|(MSP_HW_REGNUM << 24), \ */
-/* OBSOLETE 		0x40000015|(MSP_HW_REGNUM<<8)|(MSP_HW_REGNUM<<16), \ */
-/* OBSOLETE 		0xff80ff03, 0xff80ff02, 0x808000c8, 0x01014070, 0x01014070} */
-/* OBSOLETE #endif /* Byte order differs.  */ */
-/* OBSOLETE  */
-/* OBSOLETE  */
-/* OBSOLETE /* For the basic CALL_DUMMY definitions, see "tm-29k.h."  We use the */
-/* OBSOLETE    same CALL_DUMMY code, but define FIX_CALL_DUMMY (and related macros) */
-/* OBSOLETE    locally to handle remote debugging of VxWorks targets.  The difference */
-/* OBSOLETE    is in the setting and clearing of the breakpoint at the end of the */
-/* OBSOLETE    CALL_DUMMY code fragment; under VxWorks, we can't simply insert a */
-/* OBSOLETE    breakpoint instruction into the code, since that would interfere with */
-/* OBSOLETE    the breakpoint management mechanism on the target. */
-/* OBSOLETE    Note that CALL_DUMMY is a piece of code that is used to call any C function */
-/* OBSOLETE    thru VxGDB */ */
-/* OBSOLETE  */
-/* OBSOLETE /* The offset of the instruction within the CALL_DUMMY code where we */
-/* OBSOLETE    want the inferior to stop after the function call has completed. */
-/* OBSOLETE    call_function_by_hand () sets a breakpoint here (via CALL_DUMMY_BREAK_SET), */
-/* OBSOLETE    which POP_FRAME later deletes (via CALL_DUMMY_BREAK_DELETE).  */ */
-/* OBSOLETE  */
-/* OBSOLETE #define CALL_DUMMY_STOP_OFFSET (7 * 4) */
-/* OBSOLETE  */
-/* OBSOLETE /* The offset of the first instruction of the CALL_DUMMY code fragment */
-/* OBSOLETE    relative to the frame pointer for a dummy frame.  This is equal to */
-/* OBSOLETE    the size of the CALL_DUMMY plus the arg_slop area size (see the diagram */
-/* OBSOLETE    in "tm-29k.h").  */ */
-/* OBSOLETE /* PAD : the arg_slop area size doesn't appear to me to be useful since, the */
-/* OBSOLETE    call dummy code no longer modify the msp. See below. This must be checked. */ */
-/* OBSOLETE  */
-/* OBSOLETE #define CALL_DUMMY_OFFSET_IN_FRAME (CALL_DUMMY_LENGTH + 16 * 4) */
-/* OBSOLETE  */
-/* OBSOLETE /* Insert the specified number of args and function address */
-/* OBSOLETE    into a CALL_DUMMY sequence stored at DUMMYNAME, replace the third */
-/* OBSOLETE    instruction (add msp, msp, 16*4) with a nop, and leave the final nop. */
-/* OBSOLETE    We can't keep using a CALL_DUMMY that modify the msp since, for VxWorks, */
-/* OBSOLETE    CALL_DUMMY is stored in the Memory Stack. Adding 16 words to the msp */
-/* OBSOLETE    would then make possible for the inferior to overwrite the CALL_DUMMY code, */
-/* OBSOLETE    thus creating a lot of trouble when exiting the inferior to come back in */
-/* OBSOLETE    a CALL_DUMMY code that no longer exists... Furthermore, ESF are also stored */
-/* OBSOLETE    from the msp in the memory stack. If msp is set higher than the dummy code, */
-/* OBSOLETE    an ESF may clobber this code. */ */
-/* OBSOLETE  */
-/* OBSOLETE #if TARGET_BYTE_ORDER == BFD_ENDIAN_BIG */
-/* OBSOLETE #define NOP_INSTR  0x70400101 */
-/* OBSOLETE #else /* Target is little endian */ */
-/* OBSOLETE #define NOP_INSTR  0x01014070 */
-/* OBSOLETE #endif */
-/* OBSOLETE  */
-/* OBSOLETE #undef FIX_CALL_DUMMY */
-/* OBSOLETE #define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p)  \ */
-/* OBSOLETE   {                                                                   \ */
-/* OBSOLETE     *(int *)((char *)dummyname + 8) = NOP_INSTR;                      \ */
-/* OBSOLETE     STUFF_I16((char *)dummyname + CONST_INSN, fun);                   \ */
-/* OBSOLETE     STUFF_I16((char *)dummyname + CONST_INSN + 4, fun >> 16);         \ */
-/* OBSOLETE   } */
-/* OBSOLETE  */
-/* OBSOLETE /* For VxWorks, CALL_DUMMY must be stored in the stack of the task that is */
-/* OBSOLETE    being debugged and executed "in the context of" this task */ */
-/* OBSOLETE  */
-/* OBSOLETE #undef CALL_DUMMY_LOCATION */
-/* OBSOLETE #define CALL_DUMMY_LOCATION     ON_STACK */
-/* OBSOLETE  */
-/* OBSOLETE /* Set or delete a breakpoint at the location within a CALL_DUMMY code */
-/* OBSOLETE    fragment where we want the target program to stop after the function */
-/* OBSOLETE    call is complete.  CALL_DUMMY_ADDR is the address of the first */
-/* OBSOLETE    instruction in the CALL_DUMMY.  DUMMY_FRAME_ADDR is the value of the */
-/* OBSOLETE    frame pointer in the dummy frame. */
-/* OBSOLETE  */
-/* OBSOLETE    NOTE: in the both of the following definitions, we take advantage of */
-/* OBSOLETE    knowledge of the implementation of the target breakpoint operation, */
-/* OBSOLETE    in that we pass a null pointer as the second argument.  It seems */
-/* OBSOLETE    reasonable to assume that any target requiring the use of  */
-/* OBSOLETE    CALL_DUMMY_BREAK_{SET,DELETE} will not store the breakpoint */
-/* OBSOLETE    shadow contents in GDB; in any case, this assumption is vaild */
-/* OBSOLETE    for all VxWorks-related targets.  */ */
-/* OBSOLETE  */
-/* OBSOLETE #define CALL_DUMMY_BREAK_SET(call_dummy_addr) \ */
-/* OBSOLETE   target_insert_breakpoint ((call_dummy_addr) + CALL_DUMMY_STOP_OFFSET, \ */
-/* OBSOLETE 			    (char *) 0) */
-/* OBSOLETE  */
-/* OBSOLETE #define CALL_DUMMY_BREAK_DELETE(dummy_frame_addr) \ */
-/* OBSOLETE   target_remove_breakpoint ((dummy_frame_addr) - (CALL_DUMMY_OFFSET_IN_FRAME \ */
-/* OBSOLETE 				                  - CALL_DUMMY_STOP_OFFSET), \ */
-/* OBSOLETE 			    (char *) 0) */
-/* OBSOLETE  */
-/* OBSOLETE /* Return nonzero if the pc is executing within a CALL_DUMMY frame.  */ */
-/* OBSOLETE  */
-/* OBSOLETE #define PC_IN_CALL_DUMMY(pc, sp, frame_address) \ */
-/* OBSOLETE   ((pc) >= (sp) \ */
-/* OBSOLETE     && (pc) <= (sp) + CALL_DUMMY_OFFSET_IN_FRAME + CALL_DUMMY_LENGTH) */
-/* OBSOLETE  */
-/* OBSOLETE /* Defining this prevents us from trying to pass a structure-valued argument */
-/* OBSOLETE    to a function called via the CALL_DUMMY mechanism.  This is not handled */
-/* OBSOLETE    properly in call_function_by_hand (), and the fix might require re-writing */
-/* OBSOLETE    the CALL_DUMMY handling for all targets (at least, a clean solution */
-/* OBSOLETE    would probably require this).  Arguably, this should go in "tm-29k.h" */
-/* OBSOLETE    rather than here.  */ */
-/* OBSOLETE  */
-/* OBSOLETE #define STRUCT_VAL_ARGS_UNSUPPORTED */
-/* OBSOLETE  */
-/* OBSOLETE #define BKPT_OFFSET	(7 * 4) */
-/* OBSOLETE #define BKPT_INSTR	0x72500101 */
-/* OBSOLETE  */
-/* OBSOLETE #undef FIX_CALL_DUMMY */
-/* OBSOLETE #define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p)   \ */
-/* OBSOLETE   {\ */
-/* OBSOLETE     STUFF_I16((char *)dummyname + CONST_INSN, fun);\ */
-/* OBSOLETE     STUFF_I16((char *)dummyname + CONST_INSN + 4, fun >> 16);\ */
-/* OBSOLETE     *(int *)((char *)dummyname + BKPT_OFFSET) = BKPT_INSTR;\ */
-/* OBSOLETE   } */
-/* OBSOLETE  */
-/* OBSOLETE  */
-/* OBSOLETE /* Offsets into jmp_buf.  They are derived from VxWorks' REG_SET struct */
-/* OBSOLETE    (see VxWorks' setjmp.h). Note that Sun2, Sun3 and SunOS4 and VxWorks have */
-/* OBSOLETE    different REG_SET structs, hence different layouts for the jmp_buf struct. */
-/* OBSOLETE    Only JB_PC is needed for getting the saved PC value.  */ */
-/* OBSOLETE  */
-/* OBSOLETE #define JB_ELEMENT_SIZE 4	/* size of each element in jmp_buf */ */
-/* OBSOLETE #define JB_PC		3	/* offset of pc (pc1) in jmp_buf */ */
-/* OBSOLETE  */
-/* OBSOLETE /* Figure out where the longjmp will land.  We expect that we have just entered */
-/* OBSOLETE    longjmp and haven't yet setup the stack frame, so the args are still in the */
-/* OBSOLETE    output regs.  lr2 (LR2_REGNUM) points at the jmp_buf structure from which we */
-/* OBSOLETE    extract the pc (JB_PC) that we will land at.  The pc is copied into ADDR. */
-/* OBSOLETE    This routine returns true on success */ */
-/* OBSOLETE  */
-/* OBSOLETE #define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR) */
-/* OBSOLETE extern int get_longjmp_target (CORE_ADDR *); */
-/* OBSOLETE  */
-/* OBSOLETE /* VxWorks adjusts the PC after a breakpoint has been hit.  */ */
-/* OBSOLETE  */
-/* OBSOLETE #undef DECR_PC_AFTER_BREAK */
-/* OBSOLETE #define DECR_PC_AFTER_BREAK 0 */
-/* OBSOLETE  */
-/* OBSOLETE /* Do whatever promotions are appropriate on a value being returned */
-/* OBSOLETE    from a function.  VAL is the user-supplied value, and FUNC_TYPE */
-/* OBSOLETE    is the return type of the function if known, else 0. */
-/* OBSOLETE  */
-/* OBSOLETE    For the Am29k, as far as I understand, if the function return type is known, */
-/* OBSOLETE    cast the value to that type; otherwise, ensure that integer return values */
-/* OBSOLETE    fill all of gr96. */
-/* OBSOLETE  */
-/* OBSOLETE    This definition really belongs in "tm-29k.h", since it applies */
-/* OBSOLETE    to most Am29K-based systems; but once moved into that file, it might */
-/* OBSOLETE    need to be redefined for all Am29K-based targets that also redefine */
-/* OBSOLETE    STORE_RETURN_VALUE.  For now, to be safe, we define it here.  */ */
-/* OBSOLETE  */
-/* OBSOLETE #define PROMOTE_RETURN_VALUE(val, func_type) \ */
-/* OBSOLETE   do {                                                                  \ */
-/* OBSOLETE       if (func_type)                                                    \ */
-/* OBSOLETE         val = value_cast (func_type, val);                              \ */
-/* OBSOLETE       if ((TYPE_CODE (VALUE_TYPE (val)) == TYPE_CODE_INT                \ */
-/* OBSOLETE            || TYPE_CODE (VALUE_TYPE (val)) == TYPE_CODE_ENUM)           \ */
-/* OBSOLETE           && TYPE_LENGTH (VALUE_TYPE (val)) < REGISTER_RAW_SIZE (0))    \ */
-/* OBSOLETE         val = value_cast (builtin_type_int, val);                       \ */
-/* OBSOLETE   } while (0) */
-/* OBSOLETE  */
-/* OBSOLETE extern int vx29k_frame_chain_valid (CORE_ADDR, struct frame_info *); */
-/* OBSOLETE #define FRAME_CHAIN_VALID(chain, thisframe) vx29k_frame_chain_valid (chain, thisframe) */
-/* OBSOLETE  */
-/* OBSOLETE extern CORE_ADDR frame_saved_call_site (); */
-/* OBSOLETE  */
-/* OBSOLETE #undef PREPARE_TO_INIT_FRAME_INFO */
-/* OBSOLETE #define PREPARE_TO_INIT_FRAME_INFO(fci)	do {				      \ */
-/* OBSOLETE   long current_msp = read_register (MSP_REGNUM);			      \ */
-/* OBSOLETE   if (PC_IN_CALL_DUMMY (fci->pc, current_msp, 0))			      \ */
-/* OBSOLETE     {									      \ */
-/* OBSOLETE       fci->rsize = DUMMY_FRAME_RSIZE;					      \ */
-/* OBSOLETE       fci->msize = 0;							      \ */
-/* OBSOLETE       fci->saved_msp =	 						      \ */
-/* OBSOLETE 	read_register_stack_integer (fci->frame + DUMMY_FRAME_RSIZE - 4, 4);  \ */
-/* OBSOLETE       fci->flags |= (TRANSPARENT|MFP_USED);				      \ */
-/* OBSOLETE       return;								      \ */
-/* OBSOLETE     }									      \ */
-/* OBSOLETE   } while (0) */
diff --git a/gdb/config/a29k/vx29k.mt b/gdb/config/a29k/vx29k.mt
deleted file mode 100644
index 95a169e..0000000
--- a/gdb/config/a29k/vx29k.mt
+++ /dev/null
@@ -1,4 +0,0 @@
-# OBSOLETE # Target: AMD 29k running VxWorks
-# OBSOLETE TDEPFILES= a29k-tdep.o remote-vx.o remote-vx29k.o xdr_ld.o xdr_ptrace.o xdr_rdb.o 
-# OBSOLETE TM_FILE= tm-vx29k.h
-# OBSOLETE MT_CFLAGS = -DNO_HIF_SUPPORT
diff --git a/gdb/config/i386/i386lynx.mh b/gdb/config/i386/i386lynx.mh
index 0552b4d..edfb1b0 100644
--- a/gdb/config/i386/i386lynx.mh
+++ b/gdb/config/i386/i386lynx.mh
@@ -4,6 +4,3 @@ XM_CLIBS= -lbsd
 
 NAT_FILE= nm-i386lynx.h
 NATDEPFILES= fork-child.o infptrace.o inftarg.o corelow.o lynx-nat.o
-
-## OBSOLETE ## GDBSERVER_LIBS= -lbsd
-## OBSOLETE ## GDBSERVER_DEPFILES= low-lynx.o
diff --git a/gdb/config/i386/nbsd.mt b/gdb/config/i386/nbsd.mt
index 8ab606e..b8fc668 100644
--- a/gdb/config/i386/nbsd.mt
+++ b/gdb/config/i386/nbsd.mt
@@ -1,5 +1,3 @@
 # Target: Intel 386 running NetBSD
 TDEPFILES= i386-tdep.o i387-tdep.o i386bsd-tdep.o i386nbsd-tdep.o
 TM_FILE= tm-nbsd.h
-
-## OBSOLETE ## GDBSERVER_DEPFILES= low-nbsd.o
diff --git a/gdb/config/i386/nbsdelf.mt b/gdb/config/i386/nbsdelf.mt
index ab173d3..1bccd32 100644
--- a/gdb/config/i386/nbsdelf.mt
+++ b/gdb/config/i386/nbsdelf.mt
@@ -1,5 +1,3 @@
 # Target: Intel 386 running NetBSD
 TDEPFILES= i386-tdep.o i387-tdep.o i386bsd-tdep.o
 TM_FILE= tm-nbsdelf.h
-
-## OBSOLETE ## GDBSERVER_DEPFILES= low-nbsd.o
diff --git a/gdb/config/i386/x86-64linux.mt b/gdb/config/i386/x86-64linux.mt
index 1f3a796..85f1972 100644
--- a/gdb/config/i386/x86-64linux.mt
+++ b/gdb/config/i386/x86-64linux.mt
@@ -1,5 +1,3 @@
 # Target: AMD x86-64 running GNU/Linux
 TDEPFILES= x86-64-tdep.o x86-64-linux-tdep.o i387-tdep.o dwarf2cfi.o \
 	solib.o solib-svr4.o solib-legacy.o
-
-## OBSOLETE ## GDBSERVER_DEPFILES= low-linux.o
diff --git a/gdb/config/m32r/m32r.mt b/gdb/config/m32r/m32r.mt
index 2be2649..a200853 100644
--- a/gdb/config/m32r/m32r.mt
+++ b/gdb/config/m32r/m32r.mt
@@ -3,6 +3,3 @@ TDEPFILES= m32r-tdep.o monitor.o m32r-rom.o dsrec.o
 TM_FILE= tm-m32r.h
 SIM_OBS = remote-sim.o
 SIM = ../sim/m32r/libsim.a
-
-## OBSOLETE ## GDBSERVER_DEPFILES= low-sim.o
-## OBSOLETE ## GDBSERVER_LIBS = ../../sim/m32r/libsim.a ../../bfd/libbfd.a ../../libiberty/libiberty.a ../../opcodes/libopcodes.a ../../intl/libintl.a
diff --git a/gdb/config/m68k/m68klynx.mh b/gdb/config/m68k/m68klynx.mh
index 803dac3..3838012 100644
--- a/gdb/config/m68k/m68klynx.mh
+++ b/gdb/config/m68k/m68klynx.mh
@@ -4,6 +4,3 @@ XM_CLIBS= -lbsd
 
 NAT_FILE= nm-m68klynx.h
 NATDEPFILES= fork-child.o infptrace.o inftarg.o corelow.o lynx-nat.o
-
-## OBSOLETE ## GDBSERVER_LIBS= -lbsd
-## OBSOLETE ## GDBSERVER_DEPFILES= low-lynx.o
diff --git a/gdb/config/m68k/nbsd.mt b/gdb/config/m68k/nbsd.mt
index d83d91d..b6ac5a0 100644
--- a/gdb/config/m68k/nbsd.mt
+++ b/gdb/config/m68k/nbsd.mt
@@ -1,5 +1,3 @@
 # Target: Motorola m68k running NetBSD
 TDEPFILES= m68k-tdep.o m68knbsd-tdep.o
 TM_FILE= tm-nbsd.h
-
-## OBSOLETE ## GDBSERVER_DEPFILES= low-nbsd.o
diff --git a/gdb/config/m68k/sun3os4.mh b/gdb/config/m68k/sun3os4.mh
index 4ed46a2..18b1f08 100644
--- a/gdb/config/m68k/sun3os4.mh
+++ b/gdb/config/m68k/sun3os4.mh
@@ -2,5 +2,3 @@
 XM_FILE= xm-sun3os4.h
 NAT_FILE= nm-sun3.h
 NATDEPFILES= fork-child.o inftarg.o infptrace.o corelow.o sun3-nat.o
-
-## OBSOLETE ## GDBSERVER_DEPFILES= low-sun3.o
diff --git a/gdb/config/mips/vr5000.mt b/gdb/config/mips/vr5000.mt
index f9811d0..7a4a915 100644
--- a/gdb/config/mips/vr5000.mt
+++ b/gdb/config/mips/vr5000.mt
@@ -3,6 +3,3 @@ TDEPFILES= mips-tdep.o remote-mips.o
 TM_FILE= tm-vr5000.h
 SIM_OBS = remote-sim.o
 SIM = ../sim/mips/libsim.a
-
-## OBSOLETE ## GDBSERVER_DEPFILES= low-sim.o
-## OBSOLETE ## GDBSERVER_LIBS = ../../sim/mips/libsim.a ../../bfd/libbfd.a ../../libiberty/libiberty.a -lm ../../intl/libintl.a
diff --git a/gdb/config/ns32k/nbsd.mt b/gdb/config/ns32k/nbsd.mt
index f677af1..14d37f9 100644
--- a/gdb/config/ns32k/nbsd.mt
+++ b/gdb/config/ns32k/nbsd.mt
@@ -1,5 +1,3 @@
 # Target: PC532 running NetBSD
 TDEPFILES= ns32k-tdep.o
 TM_FILE= tm-nbsd.h
-
-## OBSOLETE ## GDBSERVER_DEPFILES= low-nbsd.o
diff --git a/gdb/config/pa/hppabsd.mh b/gdb/config/pa/hppabsd.mh
index 0f66bb6..d4a152d 100644
--- a/gdb/config/pa/hppabsd.mh
+++ b/gdb/config/pa/hppabsd.mh
@@ -2,5 +2,3 @@
 XM_FILE= xm-hppab.h
 NAT_FILE= nm-hppab.h
 NATDEPFILES= hppab-nat.o corelow.o core-aout.o inftarg.o fork-child.o somread.o infptrace.o hpread.o somsolib.o
-
-## OBSOLETE ## GDBSERVER_DEPFILES= low-hppabsd.o
diff --git a/gdb/config/pa/hppaosf.mh b/gdb/config/pa/hppaosf.mh
index 95a689a..d6dd282 100644
--- a/gdb/config/pa/hppaosf.mh
+++ b/gdb/config/pa/hppaosf.mh
@@ -3,6 +3,3 @@ XM_FILE= xm-hppab.h
 NAT_FILE= nm-hppao.h
 NATDEPFILES= fork-child.o m3-nat.o hppam3-nat.o somread.o hpread.o somsolib.o
 NAT_CLIBS= -lmachid -lnetname -lmach
-
-## OBSOLETE ## GDBSERVER_DEPFILES= low-hppabsd.o
-
diff --git a/gdb/config/powerpc/nbsd.mt b/gdb/config/powerpc/nbsd.mt
index 164abfe..40a2a99 100644
--- a/gdb/config/powerpc/nbsd.mt
+++ b/gdb/config/powerpc/nbsd.mt
@@ -2,7 +2,5 @@
 TDEPFILES= rs6000-tdep.o ppc-linux-tdep.o solib.o solib-svr4.o
 TM_FILE= tm-nbsd.h
 
-## OBSOLETE ## GDBSERVER_DEPFILES= low-nbsd.o
-
 SIM_OBS = remote-sim.o
 SIM = ../sim/ppc/libsim.a
diff --git a/gdb/config/rs6000/rs6000lynx.mh b/gdb/config/rs6000/rs6000lynx.mh
index 2ae49c2..096473f 100644
--- a/gdb/config/rs6000/rs6000lynx.mh
+++ b/gdb/config/rs6000/rs6000lynx.mh
@@ -4,6 +4,3 @@ XM_CLIBS= -lbsd
 
 NAT_FILE= nm-rs6000ly.h
 NATDEPFILES= fork-child.o infptrace.o inftarg.o corelow.o lynx-nat.o xcoffread.o
-
-## OBSOLETE ## GDBSERVER_LIBS= -lbsd
-## OBSOLETE ## GDBSERVER_DEPFILES= low-lynx.o
diff --git a/gdb/config/s390/s390.mt b/gdb/config/s390/s390.mt
index 9095058..6b8d91f 100644
--- a/gdb/config/s390/s390.mt
+++ b/gdb/config/s390/s390.mt
@@ -4,5 +4,3 @@ TDEPFILES=s390-tdep.o solib.o
 # Post 5.0 tdep-files
 TDEPFILES+=solib-svr4.o solib-legacy.o
 GDB_MULTI_ARCH=GDB_MULTI_ARCH_PARTIAL
-
-## OBSOLETE ## GDBSERVER_DEPFILES= low-linux.o s390-tdep.o s390-nat.o
diff --git a/gdb/config/s390/s390x.mt b/gdb/config/s390/s390x.mt
index 4df35a1..7b23cad 100644
--- a/gdb/config/s390/s390x.mt
+++ b/gdb/config/s390/s390x.mt
@@ -5,7 +5,5 @@ TDEPFILES=s390-tdep.o solib.o
 TDEPFILES+=solib-svr4.o solib-legacy.o
 GDB_MULTI_ARCH=GDB_MULTI_ARCH_PARTIAL
 
-## OBSOLETE ## GDBSERVER_DEPFILES= low-linux.o s390-tdep.o s390-nat.o
-
 # needed for gdbserver.
 MT_CFLAGS= -DCONFIG_ARCH_S390X
diff --git a/gdb/config/sparc/linux.mh b/gdb/config/sparc/linux.mh
index f2c26d5..4a2c41f 100644
--- a/gdb/config/sparc/linux.mh
+++ b/gdb/config/sparc/linux.mh
@@ -12,5 +12,3 @@ NATDEPFILES= fork-child.o infptrace.o inftarg.o corelow.o sparc-nat.o \
 LOADLIBES = -ldl -rdynamic
 
 HOST_IPC=-DBSD_IPC
-
-## OBSOLETE ## GDBSERVER_DEPFILES= low-sparc.o
diff --git a/gdb/config/sparc/sparclynx.mh b/gdb/config/sparc/sparclynx.mh
index b938b2f..c573604 100644
--- a/gdb/config/sparc/sparclynx.mh
+++ b/gdb/config/sparc/sparclynx.mh
@@ -4,6 +4,3 @@ XM_CLIBS= -lbsd
 
 NAT_FILE= nm-sparclynx.h
 NATDEPFILES= fork-child.o infptrace.o inftarg.o corelow.o lynx-nat.o
-
-## OBSOLETE ## GDBSERVER_LIBS= -lbsd
-## OBSOLETE ## GDBSERVER_DEPFILES= low-lynx.o
diff --git a/gdb/config/sparc/sun4os4.mh b/gdb/config/sparc/sun4os4.mh
index 516be36..4e664d7 100644
--- a/gdb/config/sparc/sun4os4.mh
+++ b/gdb/config/sparc/sun4os4.mh
@@ -3,8 +3,6 @@ NAT_FILE= nm-sun4os4.h
 NATDEPFILES= fork-child.o infptrace.o inftarg.o corelow.o sparc-nat.o
 HOST_IPC=-DBSD_IPC
 
-## OBSOLETE ## GDBSERVER_DEPFILES= low-sparc.o
-
 # Setting XM_CLIBS=-lresolv would let us use the DNS, but that would screw
 # anyone who wants to use NIS, which includes at least one Cygnus customer
 # (PR 3593).  So leave it this way until/unless we find a resolver which can
diff --git a/gdb/configure.tgt b/gdb/configure.tgt
index 07c8465..9b35547 100644
--- a/gdb/configure.tgt
+++ b/gdb/configure.tgt
@@ -37,15 +37,6 @@ esac
 
 case "${target}" in
 
-# OBSOLETE a29k-*-aout*)		gdb_target=a29k ;;
-# OBSOLETE a29k-*-coff*)		gdb_target=a29k ;;
-# OBSOLETE a29k-*-elf*)		gdb_target=a29k ;;
-# OBSOLETE a29k-*-ebmon*)		gdb_target=a29k ;;
-# OBSOLETE a29k-*-kern*)		gdb_target=a29k-kern ;;
-# OBSOLETE a29k-*-none*)		gdb_target=a29k ;;
-# OBSOLETE a29k-*-udi*)		gdb_target=a29k-udi ;;
-# OBSOLETE a29k-*-vxworks*)        gdb_target=vx29k ;;
-
 alpha*-*-osf*)		gdb_target=alpha-osf1 ;;
 alpha*-*-linux*)	gdb_target=alpha-linux ;;
 alpha*-*-freebsd*)	gdb_target=fbsd ;;
diff --git a/gdb/gdbserver/Makefile.in b/gdb/gdbserver/Makefile.in
index a0bad13..2c8cd33 100644
--- a/gdb/gdbserver/Makefile.in
+++ b/gdb/gdbserver/Makefile.in
@@ -262,14 +262,6 @@ linux-s390-low.o: linux-s390-low.c $(linux_low_h) $(server_h)
 linux-sh-low.o: linux-sh-low.c $(linux_low_h) $(server_h)
 linux-x86-64-low.o: linux-x86-64-low.c $(linux_low_h) $(server_h)
 
-# OBSOLETE TARGETS
-# OBSOLETE # low-lynx.o : ${srcdir}/low-lynx.c ${srcdir}/server.h
-# OBSOLETE # low-nbsd.o : ${srcdir}/low-nbsd.c ${srcdir}/server.h
-# OBSOLETE # low-sim.o : ${srcdir}/low-sim.c ${srcdir}/server.h
-# OBSOLETE # low-sparc.o : $(srcdir)/low-sparc.c $(srcdir)/server.h
-# OBSOLETE # low-sun3.o : $(srcdir)/low-sun3.c $(srcdir)/server.h
-# OBSOLETE # low-hppabsd.o : $(srcdir)/low-hppabsd.c $(srcdir)/server.h
-
 reg-arm.o : reg-arm.c $(regdef_h)
 reg-arm.c : $(srcdir)/../regformats/reg-arm.dat $(regdat_sh)
 	sh $(regdat_sh) $(srcdir)/../regformats/reg-arm.dat reg-arm.c
diff --git a/gdb/remote-adapt.c b/gdb/remote-adapt.c
deleted file mode 100644
index 7e87360..0000000
--- a/gdb/remote-adapt.c
+++ /dev/null
@@ -1,1524 +0,0 @@
-/* OBSOLETE /* Remote debugging interface for AMD 290*0 Adapt Monitor Version 2.1d18.  */
-/* OBSOLETE    Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, */
-/* OBSOLETE    2001 Free Software Foundation, Inc. */
-/* OBSOLETE    Contributed by David Wood at New York University (wood@lab.ultra.nyu.edu). */
-/* OBSOLETE    Adapted from work done at Cygnus Support in remote-eb.c. */
-/* OBSOLETE  */
-/* OBSOLETE    This file is part of GDB. */
-/* OBSOLETE  */
-/* OBSOLETE    This program is free software; you can redistribute it and/or modify */
-/* OBSOLETE    it under the terms of the GNU General Public License as published by */
-/* OBSOLETE    the Free Software Foundation; either version 2 of the License, or */
-/* OBSOLETE    (at your option) any later version. */
-/* OBSOLETE  */
-/* OBSOLETE    This program is distributed in the hope that it will be useful, */
-/* OBSOLETE    but WITHOUT ANY WARRANTY; without even the implied warranty of */
-/* OBSOLETE    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the */
-/* OBSOLETE    GNU General Public License for more details. */
-/* OBSOLETE  */
-/* OBSOLETE    You should have received a copy of the GNU General Public License */
-/* OBSOLETE    along with this program; if not, write to the Free Software */
-/* OBSOLETE    Foundation, Inc., 59 Temple Place - Suite 330, */
-/* OBSOLETE    Boston, MA 02111-1307, USA.  */ */
-/* OBSOLETE  */
-/* OBSOLETE /* This is like remote.c but is for an esoteric situation-- */
-/* OBSOLETE    having a 29k board attached to an Adapt inline monitor.  */
-/* OBSOLETE    The  monitor is connected via serial line to a unix machine  */
-/* OBSOLETE    running gdb.  */
-/* OBSOLETE  */
-/* OBSOLETE    3/91 -  developed on Sun3 OS 4.1, by David Wood */
-/* OBSOLETE    o - I can't get binary coff to load.  */
-/* OBSOLETE    o - I can't get 19200 baud rate to work.  */
-/* OBSOLETE    7/91 o - Freeze mode tracing can be done on a 29050.  */ */
-/* OBSOLETE  */
-/* OBSOLETE  */
-/* OBSOLETE  */
-/* OBSOLETE #include "defs.h" */
-/* OBSOLETE #include "gdb_string.h" */
-/* OBSOLETE #include "inferior.h" */
-/* OBSOLETE #include "value.h" */
-/* OBSOLETE #include <ctype.h> */
-/* OBSOLETE #include <fcntl.h> */
-/* OBSOLETE #include <signal.h> */
-/* OBSOLETE #include <errno.h> */
-/* OBSOLETE #include "terminal.h" */
-/* OBSOLETE #include "target.h" */
-/* OBSOLETE #include "gdbcore.h" */
-/* OBSOLETE #include "regcache.h" */
-/* OBSOLETE  */
-/* OBSOLETE /* This processor is getting rusty but I am trying to keep it */
-/* OBSOLETE    up to date at least with data structure changes. */
-/* OBSOLETE    Activate this block to compile just this file. */
-/* OBSOLETE  */ */
-/* OBSOLETE #define COMPILE_CHECK 0 */
-/* OBSOLETE #if COMPILE_CHECK */
-/* OBSOLETE #define Q_REGNUM 0 */
-/* OBSOLETE #define VAB_REGNUM 0 */
-/* OBSOLETE #define CPS_REGNUM 0 */
-/* OBSOLETE #define IPA_REGNUM 0 */
-/* OBSOLETE #define IPB_REGNUM 0 */
-/* OBSOLETE #define GR1_REGNUM 0 */
-/* OBSOLETE #define LR0_REGNUM 0 */
-/* OBSOLETE #define IPC_REGNUM 0 */
-/* OBSOLETE #define CR_REGNUM 0 */
-/* OBSOLETE #define BP_REGNUM 0 */
-/* OBSOLETE #define FC_REGNUM 0 */
-/* OBSOLETE #define INTE_REGNUM 0 */
-/* OBSOLETE #define EXO_REGNUM 0 */
-/* OBSOLETE #define GR96_REGNUM 0 */
-/* OBSOLETE #define NPC_REGNUM */
-/* OBSOLETE #define FPE_REGNUM 0 */
-/* OBSOLETE #define PC2_REGNUM 0 */
-/* OBSOLETE #define FPS_REGNUM 0 */
-/* OBSOLETE #define ALU_REGNUM 0 */
-/* OBSOLETE #define LRU_REGNUM 0 */
-/* OBSOLETE #define TERMINAL int */
-/* OBSOLETE #define RAW 1 */
-/* OBSOLETE #define ANYP 1 */
-/* OBSOLETE extern int a29k_freeze_mode; */
-/* OBSOLETE extern int processor_type; */
-/* OBSOLETE extern char *processor_name; */
-/* OBSOLETE #endif */
-/* OBSOLETE  */
-/* OBSOLETE /* External data declarations */ */
-/* OBSOLETE extern int stop_soon_quietly;	/* for wait_for_inferior */ */
-/* OBSOLETE  */
-/* OBSOLETE /* Forward data declarations */ */
-/* OBSOLETE extern struct target_ops adapt_ops;	/* Forward declaration */ */
-/* OBSOLETE  */
-/* OBSOLETE /* Forward function declarations */ */
-/* OBSOLETE static void adapt_fetch_registers (); */
-/* OBSOLETE static void adapt_store_registers (); */
-/* OBSOLETE static void adapt_close (); */
-/* OBSOLETE static int adapt_clear_breakpoints (); */
-/* OBSOLETE  */
-/* OBSOLETE #define FREEZE_MODE 	(read_register(CPS_REGNUM) && 0x400) */
-/* OBSOLETE #define USE_SHADOW_PC	((processor_type == a29k_freeze_mode) && FREEZE_MODE) */
-/* OBSOLETE  */
-/* OBSOLETE /* Can't seem to get binary coff working */ */
-/* OBSOLETE #define ASCII_COFF		/* Adapt will be downloaded with ascii coff */ */
-/* OBSOLETE  */
-/* OBSOLETE /* FIXME: Replace with `set remotedebug'.  */ */
-/* OBSOLETE #define LOG_FILE "adapt.log" */
-/* OBSOLETE #if defined (LOG_FILE) */
-/* OBSOLETE FILE *log_file = NULL; */
-/* OBSOLETE #endif */
-/* OBSOLETE  */
-/* OBSOLETE static int timeout = 5; */
-/* OBSOLETE static char *dev_name; */
-/* OBSOLETE  */
-/* OBSOLETE /* Descriptor for I/O to remote machine.  Initialize it to -1 so that */
-/* OBSOLETE    adapt_open knows that we don't have a file open when the program */
-/* OBSOLETE    starts.  */ */
-/* OBSOLETE int adapt_desc = -1; */
-/* OBSOLETE  */
-/* OBSOLETE /* stream which is fdopen'd from adapt_desc.  Only valid when */
-/* OBSOLETE    adapt_desc != -1.  */ */
-/* OBSOLETE FILE *adapt_stream; */
-/* OBSOLETE  */
-/* OBSOLETE #define ON	1 */
-/* OBSOLETE #define OFF	0 */
-/* OBSOLETE static void */
-/* OBSOLETE rawmode (int desc, int turnon) */
-/* OBSOLETE { */
-/* OBSOLETE  */
-/* OBSOLETE   TERMINAL sg; */
-/* OBSOLETE  */
-/* OBSOLETE   if (desc < 0) */
-/* OBSOLETE     return; */
-/* OBSOLETE  */
-/* OBSOLETE   ioctl (desc, TIOCGETP, &sg); */
-/* OBSOLETE  */
-/* OBSOLETE   if (turnon) */
-/* OBSOLETE     { */
-/* OBSOLETE #ifdef HAVE_TERMIO */
-/* OBSOLETE       sg.c_lflag &= ~(ICANON); */
-/* OBSOLETE #else */
-/* OBSOLETE       sg.sg_flags |= RAW; */
-/* OBSOLETE #endif */
-/* OBSOLETE     } */
-/* OBSOLETE   else */
-/* OBSOLETE     { */
-/* OBSOLETE #ifdef HAVE_TERMIO */
-/* OBSOLETE       sg.c_lflag |= ICANON; */
-/* OBSOLETE #else */
-/* OBSOLETE       sg.sg_flags &= ~(RAW); */
-/* OBSOLETE #endif */
-/* OBSOLETE     } */
-/* OBSOLETE   ioctl (desc, TIOCSETP, &sg); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Suck up all the input from the adapt */ */
-/* OBSOLETE slurp_input (void) */
-/* OBSOLETE { */
-/* OBSOLETE   char buf[8]; */
-/* OBSOLETE  */
-/* OBSOLETE #ifdef HAVE_TERMIO */
-/* OBSOLETE   /* termio does the timeout for us.  */ */
-/* OBSOLETE   while (read (adapt_desc, buf, 8) > 0); */
-/* OBSOLETE #else */
-/* OBSOLETE   alarm (timeout); */
-/* OBSOLETE   while (read (adapt_desc, buf, 8) > 0); */
-/* OBSOLETE   alarm (0); */
-/* OBSOLETE #endif */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Read a character from the remote system, doing all the fancy */
-/* OBSOLETE    timeout stuff.  */ */
-/* OBSOLETE static int */
-/* OBSOLETE readchar (void) */
-/* OBSOLETE { */
-/* OBSOLETE   char buf; */
-/* OBSOLETE  */
-/* OBSOLETE   buf = '\0'; */
-/* OBSOLETE #ifdef HAVE_TERMIO */
-/* OBSOLETE   /* termio does the timeout for us.  */ */
-/* OBSOLETE   read (adapt_desc, &buf, 1); */
-/* OBSOLETE #else */
-/* OBSOLETE   alarm (timeout); */
-/* OBSOLETE   if (read (adapt_desc, &buf, 1) < 0) */
-/* OBSOLETE     { */
-/* OBSOLETE       if (errno == EINTR) */
-/* OBSOLETE 	error ("Timeout reading from remote system."); */
-/* OBSOLETE       else */
-/* OBSOLETE 	perror_with_name ("remote"); */
-/* OBSOLETE     } */
-/* OBSOLETE   alarm (0); */
-/* OBSOLETE #endif */
-/* OBSOLETE  */
-/* OBSOLETE   if (buf == '\0') */
-/* OBSOLETE     error ("Timeout reading from remote system."); */
-/* OBSOLETE #if defined (LOG_FILE) */
-/* OBSOLETE   putc (buf & 0x7f, log_file); */
-/* OBSOLETE #endif */
-/* OBSOLETE   return buf & 0x7f; */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Keep discarding input from the remote system, until STRING is found.  */
-/* OBSOLETE    Let the user break out immediately.  */ */
-/* OBSOLETE static void */
-/* OBSOLETE expect (char *string) */
-/* OBSOLETE { */
-/* OBSOLETE   char *p = string; */
-/* OBSOLETE  */
-/* OBSOLETE   fflush (adapt_stream); */
-/* OBSOLETE   immediate_quit++; */
-/* OBSOLETE   while (1) */
-/* OBSOLETE     { */
-/* OBSOLETE       if (readchar () == *p) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  p++; */
-/* OBSOLETE 	  if (*p == '\0') */
-/* OBSOLETE 	    { */
-/* OBSOLETE 	      immediate_quit--; */
-/* OBSOLETE 	      return; */
-/* OBSOLETE 	    } */
-/* OBSOLETE 	} */
-/* OBSOLETE       else */
-/* OBSOLETE 	p = string; */
-/* OBSOLETE     } */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Keep discarding input until we see the adapt prompt. */
-/* OBSOLETE  */
-/* OBSOLETE    The convention for dealing with the prompt is that you */
-/* OBSOLETE    o give your command */
-/* OBSOLETE    o *then* wait for the prompt. */
-/* OBSOLETE  */
-/* OBSOLETE    Thus the last thing that a procedure does with the serial line */
-/* OBSOLETE    will be an expect_prompt().  Exception:  adapt_resume does not */
-/* OBSOLETE    wait for the prompt, because the terminal is being handed over */
-/* OBSOLETE    to the inferior.  However, the next thing which happens after that */
-/* OBSOLETE    is a adapt_wait which does wait for the prompt. */
-/* OBSOLETE    Note that this includes abnormal exit, e.g. error().  This is */
-/* OBSOLETE    necessary to prevent getting into states from which we can't */
-/* OBSOLETE    recover.  */ */
-/* OBSOLETE static void */
-/* OBSOLETE expect_prompt (void) */
-/* OBSOLETE { */
-/* OBSOLETE #if defined (LOG_FILE) */
-/* OBSOLETE   /* This is a convenient place to do this.  The idea is to do it often */
-/* OBSOLETE      enough that we never lose much data if we terminate abnormally.  */ */
-/* OBSOLETE   fflush (log_file); */
-/* OBSOLETE #endif */
-/* OBSOLETE   fflush (adapt_stream); */
-/* OBSOLETE   expect ("\n# "); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Get a hex digit from the remote system & return its value. */
-/* OBSOLETE    If ignore_space is nonzero, ignore spaces (not newline, tab, etc).  */ */
-/* OBSOLETE static int */
-/* OBSOLETE get_hex_digit (int ignore_space) */
-/* OBSOLETE { */
-/* OBSOLETE   int ch; */
-/* OBSOLETE   while (1) */
-/* OBSOLETE     { */
-/* OBSOLETE       ch = readchar (); */
-/* OBSOLETE       if (ch >= '0' && ch <= '9') */
-/* OBSOLETE 	return ch - '0'; */
-/* OBSOLETE       else if (ch >= 'A' && ch <= 'F') */
-/* OBSOLETE 	return ch - 'A' + 10; */
-/* OBSOLETE       else if (ch >= 'a' && ch <= 'f') */
-/* OBSOLETE 	return ch - 'a' + 10; */
-/* OBSOLETE       else if (ch == ' ' && ignore_space) */
-/* OBSOLETE 	; */
-/* OBSOLETE       else */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  expect_prompt (); */
-/* OBSOLETE 	  error ("Invalid hex digit from remote system."); */
-/* OBSOLETE 	} */
-/* OBSOLETE     } */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Get a byte from adapt_desc and put it in *BYT.  Accept any number */
-/* OBSOLETE    leading spaces.  */ */
-/* OBSOLETE static void */
-/* OBSOLETE get_hex_byte (char *byt) */
-/* OBSOLETE { */
-/* OBSOLETE   int val; */
-/* OBSOLETE  */
-/* OBSOLETE   val = get_hex_digit (1) << 4; */
-/* OBSOLETE   val |= get_hex_digit (0); */
-/* OBSOLETE   *byt = val; */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Read a 32-bit hex word from the adapt, preceded by a space  */ */
-/* OBSOLETE static long */
-/* OBSOLETE get_hex_word (void) */
-/* OBSOLETE { */
-/* OBSOLETE   long val; */
-/* OBSOLETE   int j; */
-/* OBSOLETE  */
-/* OBSOLETE   val = 0; */
-/* OBSOLETE   for (j = 0; j < 8; j++) */
-/* OBSOLETE     val = (val << 4) + get_hex_digit (j == 0); */
-/* OBSOLETE   return val; */
-/* OBSOLETE } */
-/* OBSOLETE /* Get N 32-bit hex words from remote, each preceded by a space  */
-/* OBSOLETE    and put them in registers starting at REGNO.  */ */
-/* OBSOLETE static void */
-/* OBSOLETE get_hex_regs (int n, int regno) */
-/* OBSOLETE { */
-/* OBSOLETE   long val; */
-/* OBSOLETE   while (n--) */
-/* OBSOLETE     { */
-/* OBSOLETE       val = get_hex_word (); */
-/* OBSOLETE       supply_register (regno++, (char *) &val); */
-/* OBSOLETE     } */
-/* OBSOLETE } */
-/* OBSOLETE /* Called when SIGALRM signal sent due to alarm() timeout.  */ */
-/* OBSOLETE #ifndef HAVE_TERMIO */
-/* OBSOLETE  */
-/* OBSOLETE volatile int n_alarms; */
-/* OBSOLETE  */
-/* OBSOLETE void */
-/* OBSOLETE adapt_timer (void) */
-/* OBSOLETE { */
-/* OBSOLETE #if 0 */
-/* OBSOLETE   if (kiodebug) */
-/* OBSOLETE     printf ("adapt_timer called\n"); */
-/* OBSOLETE #endif */
-/* OBSOLETE   n_alarms++; */
-/* OBSOLETE } */
-/* OBSOLETE #endif */
-/* OBSOLETE  */
-/* OBSOLETE /* malloc'd name of the program on the remote system.  */ */
-/* OBSOLETE static char *prog_name = NULL; */
-/* OBSOLETE  */
-/* OBSOLETE /* Number of SIGTRAPs we need to simulate.  That is, the next */
-/* OBSOLETE    NEED_ARTIFICIAL_TRAP calls to adapt_wait should just return */
-/* OBSOLETE    SIGTRAP without actually waiting for anything.  */ */
-/* OBSOLETE  */
-/* OBSOLETE static int need_artificial_trap = 0; */
-/* OBSOLETE  */
-/* OBSOLETE void */
-/* OBSOLETE adapt_kill (char *arg, int from_tty) */
-/* OBSOLETE { */
-/* OBSOLETE   fprintf (adapt_stream, "K"); */
-/* OBSOLETE   fprintf (adapt_stream, "\r"); */
-/* OBSOLETE   expect_prompt (); */
-/* OBSOLETE } */
-/* OBSOLETE /* */
-/* OBSOLETE  * Download a file specified in 'args', to the adapt.  */
-/* OBSOLETE  * FIXME: Assumes the file to download is a binary coff file. */
-/* OBSOLETE  */ */
-/* OBSOLETE static void */
-/* OBSOLETE adapt_load (char *args, int fromtty) */
-/* OBSOLETE { */
-/* OBSOLETE   FILE *fp; */
-/* OBSOLETE   int n; */
-/* OBSOLETE   char buffer[1024]; */
-/* OBSOLETE  */
-/* OBSOLETE   if (!adapt_stream) */
-/* OBSOLETE     { */
-/* OBSOLETE       printf_filtered ("Adapt not open. Use 'target' command to open adapt\n"); */
-/* OBSOLETE       return; */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   /* OK, now read in the file.  Y=read, C=COFF, T=dTe port */
-/* OBSOLETE      0=start address.  */ */
-/* OBSOLETE  */
-/* OBSOLETE #ifdef ASCII_COFF		/* Ascii coff */ */
-/* OBSOLETE   fprintf (adapt_stream, "YA T,0\r"); */
-/* OBSOLETE   fflush (adapt_stream);	/* Just in case */ */
-/* OBSOLETE   /* FIXME: should check args for only 1 argument */ */
-/* OBSOLETE   sprintf (buffer, "cat %s | btoa > /tmp/#adapt-btoa", args); */
-/* OBSOLETE   system (buffer); */
-/* OBSOLETE   fp = fopen ("/tmp/#adapt-btoa", "r"); */
-/* OBSOLETE   rawmode (adapt_desc, OFF); */
-/* OBSOLETE   while (n = fread (buffer, 1, 1024, fp)) */
-/* OBSOLETE     { */
-/* OBSOLETE       do */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  n -= write (adapt_desc, buffer, n); */
-/* OBSOLETE 	} */
-/* OBSOLETE       while (n > 0); */
-/* OBSOLETE       if (n < 0) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  perror ("writing ascii coff"); */
-/* OBSOLETE 	  break; */
-/* OBSOLETE 	} */
-/* OBSOLETE     } */
-/* OBSOLETE   fclose (fp); */
-/* OBSOLETE   rawmode (adapt_desc, ON); */
-/* OBSOLETE   system ("rm /tmp/#adapt-btoa"); */
-/* OBSOLETE #else /* Binary coff - can't get it to work . */ */
-/* OBSOLETE   fprintf (adapt_stream, "YC T,0\r"); */
-/* OBSOLETE   fflush (adapt_stream);	/* Just in case */ */
-/* OBSOLETE   if (!(fp = fopen (args, "r"))) */
-/* OBSOLETE     { */
-/* OBSOLETE       printf_filtered ("Can't open %s\n", args); */
-/* OBSOLETE       return; */
-/* OBSOLETE     } */
-/* OBSOLETE   while (n = fread (buffer, 1, 512, fp)) */
-/* OBSOLETE     { */
-/* OBSOLETE       do */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  n -= write (adapt_desc, buffer, n); */
-/* OBSOLETE 	} */
-/* OBSOLETE       while (n > 0); */
-/* OBSOLETE       if (n < 0) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  perror ("writing ascii coff"); */
-/* OBSOLETE 	  break; */
-/* OBSOLETE 	} */
-/* OBSOLETE     } */
-/* OBSOLETE   fclose (fp); */
-/* OBSOLETE #endif */
-/* OBSOLETE   expect_prompt ();		/* Skip garbage that comes out */ */
-/* OBSOLETE   fprintf (adapt_stream, "\r"); */
-/* OBSOLETE   expect_prompt (); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* This is called not only when we first attach, but also when the */
-/* OBSOLETE    user types "run" after having attached.  */ */
-/* OBSOLETE void */
-/* OBSOLETE adapt_create_inferior (char *execfile, char *args, char **env) */
-/* OBSOLETE { */
-/* OBSOLETE   int entry_pt; */
-/* OBSOLETE  */
-/* OBSOLETE   if (args && *args) */
-/* OBSOLETE     error ("Can't pass arguments to remote adapt process."); */
-/* OBSOLETE  */
-/* OBSOLETE   if (execfile == 0 || exec_bfd == 0) */
-/* OBSOLETE     error ("No executable file specified"); */
-/* OBSOLETE  */
-/* OBSOLETE   entry_pt = (int) bfd_get_start_address (exec_bfd); */
-/* OBSOLETE  */
-/* OBSOLETE   if (adapt_stream) */
-/* OBSOLETE     { */
-/* OBSOLETE       adapt_kill (NULL, NULL); */
-/* OBSOLETE       adapt_clear_breakpoints (); */
-/* OBSOLETE       init_wait_for_inferior (); */
-/* OBSOLETE       /* Clear the input because what the adapt sends back is different */
-/* OBSOLETE        * depending on whether it was running or not. */
-/* OBSOLETE        */ */
-/* OBSOLETE       slurp_input ();		/* After this there should be a prompt */ */
-/* OBSOLETE       fprintf (adapt_stream, "\r"); */
-/* OBSOLETE       expect_prompt (); */
-/* OBSOLETE       printf_filtered ("Do you want to download '%s' (y/n)? [y] : ", prog_name); */
-/* OBSOLETE       { */
-/* OBSOLETE 	char buffer[10]; */
-/* OBSOLETE 	gets (buffer); */
-/* OBSOLETE 	if (*buffer != 'n') */
-/* OBSOLETE 	  { */
-/* OBSOLETE 	    adapt_load (prog_name, 0); */
-/* OBSOLETE 	  } */
-/* OBSOLETE       } */
-/* OBSOLETE  */
-/* OBSOLETE #ifdef NOTDEF */
-/* OBSOLETE       /* Set the PC and wait for a go/cont */ */
-/* OBSOLETE       fprintf (adapt_stream, "G %x,N\r", entry_pt); */
-/* OBSOLETE       printf_filtered ("Now use the 'continue' command to start.\n"); */
-/* OBSOLETE       expect_prompt (); */
-/* OBSOLETE #else */
-/* OBSOLETE       insert_breakpoints ();	/* Needed to get correct instruction in cache */ */
-/* OBSOLETE       proceed (entry_pt, TARGET_SIGNAL_DEFAULT, 0); */
-/* OBSOLETE #endif */
-/* OBSOLETE  */
-/* OBSOLETE     } */
-/* OBSOLETE   else */
-/* OBSOLETE     { */
-/* OBSOLETE       printf_filtered ("Adapt not open yet.\n"); */
-/* OBSOLETE     } */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Translate baud rates from integers to damn B_codes.  Unix should */
-/* OBSOLETE    have outgrown this crap years ago, but even POSIX wouldn't buck it.  */ */
-/* OBSOLETE  */
-/* OBSOLETE #ifndef B19200 */
-/* OBSOLETE #define B19200 EXTA */
-/* OBSOLETE #endif */
-/* OBSOLETE #ifndef B38400 */
-/* OBSOLETE #define B38400 EXTB */
-/* OBSOLETE #endif */
-/* OBSOLETE  */
-/* OBSOLETE static struct */
-/* OBSOLETE { */
-/* OBSOLETE   int rate, damn_b; */
-/* OBSOLETE } */
-/* OBSOLETE baudtab[] = */
-/* OBSOLETE { */
-/* OBSOLETE   { */
-/* OBSOLETE     0, B0 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     50, B50 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     75, B75 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     110, B110 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     134, B134 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     150, B150 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     200, B200 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     300, B300 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     600, B600 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     1200, B1200 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     1800, B1800 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     2400, B2400 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     4800, B4800 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     9600, B9600 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     19200, B19200 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     38400, B38400 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     -1, -1 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE }; */
-/* OBSOLETE  */
-/* OBSOLETE static int */
-/* OBSOLETE damn_b (int rate) */
-/* OBSOLETE { */
-/* OBSOLETE   int i; */
-/* OBSOLETE  */
-/* OBSOLETE   for (i = 0; baudtab[i].rate != -1; i++) */
-/* OBSOLETE     if (rate == baudtab[i].rate) */
-/* OBSOLETE       return baudtab[i].damn_b; */
-/* OBSOLETE   return B38400;		/* Random */ */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE  */
-/* OBSOLETE /* Open a connection to a remote debugger. */
-/* OBSOLETE    NAME is the filename used for communication, then a space, */
-/* OBSOLETE    then the baud rate. */
-/* OBSOLETE  */ */
-/* OBSOLETE  */
-/* OBSOLETE static int baudrate = 9600; */
-/* OBSOLETE static void */
-/* OBSOLETE adapt_open (char *name, int from_tty) */
-/* OBSOLETE { */
-/* OBSOLETE   TERMINAL sg; */
-/* OBSOLETE   unsigned int prl; */
-/* OBSOLETE   char *p; */
-/* OBSOLETE  */
-/* OBSOLETE   /* Find the first whitespace character, it separates dev_name from */
-/* OBSOLETE      prog_name.  */ */
-/* OBSOLETE   if (name == 0) */
-/* OBSOLETE     goto erroid; */
-/* OBSOLETE  */
-/* OBSOLETE   for (p = name; */
-/* OBSOLETE        *p != '\0' && !isspace (*p); p++) */
-/* OBSOLETE     ; */
-/* OBSOLETE   if (*p == '\0') */
-/* OBSOLETE   erroid: */
-/* OBSOLETE     error ("\ */
-/* OBSOLETE Please include the name of the device for the serial port,\n\ */
-/* OBSOLETE the baud rate, and the name of the program to run on the remote system."); */
-/* OBSOLETE   dev_name = (char *) xmalloc (p - name + 1); */
-/* OBSOLETE   strncpy (dev_name, name, p - name); */
-/* OBSOLETE   dev_name[p - name] = '\0'; */
-/* OBSOLETE  */
-/* OBSOLETE   /* Skip over the whitespace after dev_name */ */
-/* OBSOLETE   for (; isspace (*p); p++) */
-/* OBSOLETE     /*EMPTY */ ; */
-/* OBSOLETE  */
-/* OBSOLETE   if (1 != sscanf (p, "%d ", &baudrate)) */
-/* OBSOLETE     goto erroid; */
-/* OBSOLETE  */
-/* OBSOLETE   /* Skip the number and then the spaces */ */
-/* OBSOLETE   for (; isdigit (*p); p++) */
-/* OBSOLETE     /*EMPTY */ ; */
-/* OBSOLETE   for (; isspace (*p); p++) */
-/* OBSOLETE     /*EMPTY */ ; */
-/* OBSOLETE  */
-/* OBSOLETE   if (prog_name != NULL) */
-/* OBSOLETE     xfree (prog_name); */
-/* OBSOLETE   prog_name = savestring (p, strlen (p)); */
-/* OBSOLETE  */
-/* OBSOLETE   adapt_close (0); */
-/* OBSOLETE  */
-/* OBSOLETE   adapt_desc = open (dev_name, O_RDWR); */
-/* OBSOLETE   if (adapt_desc < 0) */
-/* OBSOLETE     perror_with_name (dev_name); */
-/* OBSOLETE   ioctl (adapt_desc, TIOCGETP, &sg); */
-/* OBSOLETE #if ! defined(COMPILE_CHECK) */
-/* OBSOLETE #ifdef HAVE_TERMIO */
-/* OBSOLETE   sg.c_cc[VMIN] = 0;		/* read with timeout.  */ */
-/* OBSOLETE   sg.c_cc[VTIME] = timeout * 10; */
-/* OBSOLETE   sg.c_lflag &= ~(ICANON | ECHO); */
-/* OBSOLETE   sg.c_cflag = (sg.c_cflag & ~CBAUD) | damn_b (baudrate); */
-/* OBSOLETE #else */
-/* OBSOLETE   sg.sg_ispeed = damn_b (baudrate); */
-/* OBSOLETE   sg.sg_ospeed = damn_b (baudrate); */
-/* OBSOLETE   sg.sg_flags |= RAW | ANYP; */
-/* OBSOLETE   sg.sg_flags &= ~ECHO; */
-/* OBSOLETE #endif */
-/* OBSOLETE  */
-/* OBSOLETE   ioctl (adapt_desc, TIOCSETP, &sg); */
-/* OBSOLETE   adapt_stream = fdopen (adapt_desc, "r+"); */
-/* OBSOLETE #endif /* compile_check */ */
-/* OBSOLETE   push_target (&adapt_ops); */
-/* OBSOLETE  */
-/* OBSOLETE #ifndef HAVE_TERMIO */
-/* OBSOLETE #ifndef NO_SIGINTERRUPT */
-/* OBSOLETE   /* Cause SIGALRM's to make reads fail with EINTR instead of resuming */
-/* OBSOLETE      the read.  */ */
-/* OBSOLETE   if (siginterrupt (SIGALRM, 1) != 0) */
-/* OBSOLETE     perror ("adapt_open: error in siginterrupt"); */
-/* OBSOLETE #endif */
-/* OBSOLETE  */
-/* OBSOLETE   /* Set up read timeout timer.  */ */
-/* OBSOLETE   if ((void (*)) signal (SIGALRM, adapt_timer) == (void (*)) -1) */
-/* OBSOLETE     perror ("adapt_open: error in signal"); */
-/* OBSOLETE #endif */
-/* OBSOLETE  */
-/* OBSOLETE #if defined (LOG_FILE) */
-/* OBSOLETE   log_file = fopen (LOG_FILE, "w"); */
-/* OBSOLETE   if (log_file == NULL) */
-/* OBSOLETE     perror_with_name (LOG_FILE); */
-/* OBSOLETE #endif */
-/* OBSOLETE  */
-/* OBSOLETE   /* Put this port into NORMAL mode, send the 'normal' character */ */
-/* OBSOLETE   write (adapt_desc, "
", 1);	/* Control A */ */
-/* OBSOLETE   write (adapt_desc, "\r", 1); */
-/* OBSOLETE   expect_prompt (); */
-/* OBSOLETE  */
-/* OBSOLETE   /* Hello?  Are you there?  */ */
-/* OBSOLETE   write (adapt_desc, "\r", 1); */
-/* OBSOLETE  */
-/* OBSOLETE   expect_prompt (); */
-/* OBSOLETE  */
-/* OBSOLETE   /* Clear any break points */ */
-/* OBSOLETE   adapt_clear_breakpoints (); */
-/* OBSOLETE  */
-/* OBSOLETE   /* Print out some stuff, letting the user now what's going on */ */
-/* OBSOLETE   printf_filtered ("Connected to an Adapt via %s.\n", dev_name); */
-/* OBSOLETE   /* FIXME: can this restriction be removed? */ */
-/* OBSOLETE   printf_filtered ("Remote debugging using virtual addresses works only\n"); */
-/* OBSOLETE   printf_filtered ("\twhen virtual addresses map 1:1 to physical addresses.\n"); */
-/* OBSOLETE   if (processor_type != a29k_freeze_mode) */
-/* OBSOLETE     { */
-/* OBSOLETE       fprintf_filtered (gdb_stderr, */
-/* OBSOLETE 			"Freeze-mode debugging not available, and can only be done on an A29050.\n"); */
-/* OBSOLETE     } */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Close out all files and local state before this target loses control. */ */
-/* OBSOLETE  */
-/* OBSOLETE static void */
-/* OBSOLETE adapt_close (int quitting) */
-/* OBSOLETE { */
-/* OBSOLETE  */
-/* OBSOLETE   /* Clear any break points */ */
-/* OBSOLETE   adapt_clear_breakpoints (); */
-/* OBSOLETE  */
-/* OBSOLETE   /* Put this port back into REMOTE mode */ */
-/* OBSOLETE   if (adapt_stream) */
-/* OBSOLETE     { */
-/* OBSOLETE       fflush (adapt_stream); */
-/* OBSOLETE       sleep (1);		/* Let any output make it all the way back */ */
-/* OBSOLETE       write (adapt_desc, "R\r", 2); */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   /* Due to a bug in Unix, fclose closes not only the stdio stream, */
-/* OBSOLETE      but also the file descriptor.  So we don't actually close */
-/* OBSOLETE      adapt_desc.  */ */
-/* OBSOLETE   if (adapt_stream) */
-/* OBSOLETE     fclose (adapt_stream);	/* This also closes adapt_desc */ */
-/* OBSOLETE   if (adapt_desc >= 0) */
-/* OBSOLETE     /* close (adapt_desc); */ */
-/* OBSOLETE  */
-/* OBSOLETE     /* Do not try to close adapt_desc again, later in the program.  */ */
-/* OBSOLETE     adapt_stream = NULL; */
-/* OBSOLETE   adapt_desc = -1; */
-/* OBSOLETE  */
-/* OBSOLETE #if defined (LOG_FILE) */
-/* OBSOLETE   if (log_file) */
-/* OBSOLETE     { */
-/* OBSOLETE       if (ferror (log_file)) */
-/* OBSOLETE 	printf_filtered ("Error writing log file.\n"); */
-/* OBSOLETE       if (fclose (log_file) != 0) */
-/* OBSOLETE 	printf_filtered ("Error closing log file.\n"); */
-/* OBSOLETE       log_file = NULL; */
-/* OBSOLETE     } */
-/* OBSOLETE #endif */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Attach to the target that is already loaded and possibly running */ */
-/* OBSOLETE static void */
-/* OBSOLETE adapt_attach (char *args, int from_tty) */
-/* OBSOLETE { */
-/* OBSOLETE  */
-/* OBSOLETE   if (from_tty) */
-/* OBSOLETE     printf_filtered ("Attaching to remote program %s.\n", prog_name); */
-/* OBSOLETE  */
-/* OBSOLETE   /* Send the adapt a kill. It is ok if it is not already running */ */
-/* OBSOLETE   fprintf (adapt_stream, "K\r"); */
-/* OBSOLETE   fflush (adapt_stream); */
-/* OBSOLETE   expect_prompt ();		/* Slurp the echo */ */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE  */
-/* OBSOLETE /* Terminate the open connection to the remote debugger. */
-/* OBSOLETE    Use this when you want to detach and do something else */
-/* OBSOLETE    with your gdb.  */ */
-/* OBSOLETE void */
-/* OBSOLETE adapt_detach (char *args, int from_tty) */
-/* OBSOLETE { */
-/* OBSOLETE  */
-/* OBSOLETE   if (adapt_stream) */
-/* OBSOLETE     {				/* Send it on its way (tell it to continue)  */ */
-/* OBSOLETE       adapt_clear_breakpoints (); */
-/* OBSOLETE       fprintf (adapt_stream, "G\r"); */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   pop_target ();		/* calls adapt_close to do the real work */ */
-/* OBSOLETE   if (from_tty) */
-/* OBSOLETE     printf_filtered ("Ending remote %s debugging\n", target_shortname); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Tell the remote machine to resume.  */ */
-/* OBSOLETE  */
-/* OBSOLETE void */
-/* OBSOLETE adapt_resume (ptid_t ptid, int step, enum target_signal sig) */
-/* OBSOLETE { */
-/* OBSOLETE   if (step) */
-/* OBSOLETE     { */
-/* OBSOLETE       write (adapt_desc, "t 1,s\r", 6); */
-/* OBSOLETE       /* Wait for the echo.  */ */
-/* OBSOLETE       expect ("t 1,s\r\n"); */
-/* OBSOLETE       /* Then comes a line containing the instruction we stepped to.  */ */
-/* OBSOLETE       expect ("@"); */
-/* OBSOLETE       /* Then we get the prompt.  */ */
-/* OBSOLETE       expect_prompt (); */
-/* OBSOLETE  */
-/* OBSOLETE       /* Force the next adapt_wait to return a trap.  Not doing anything */
-/* OBSOLETE          about I/O from the target means that the user has to type */
-/* OBSOLETE          "continue" to see any.  FIXME, this should be fixed.  */ */
-/* OBSOLETE       need_artificial_trap = 1; */
-/* OBSOLETE     } */
-/* OBSOLETE   else */
-/* OBSOLETE     { */
-/* OBSOLETE       write (adapt_desc, "G\r", 2); */
-/* OBSOLETE       /* Swallow the echo.  */ */
-/* OBSOLETE       expect_prompt (); */
-/* OBSOLETE     } */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Wait until the remote machine stops, then return, */
-/* OBSOLETE    storing status in STATUS just as `wait' would.  */ */
-/* OBSOLETE  */
-/* OBSOLETE ptid_t */
-/* OBSOLETE adapt_wait (ptid_t ptid, struct target_waitstatus *status) */
-/* OBSOLETE { */
-/* OBSOLETE   /* Strings to look for.  '?' means match any single character.   */
-/* OBSOLETE      Note that with the algorithm we use, the initial character */
-/* OBSOLETE      of the string cannot recur in the string, or we will not */
-/* OBSOLETE      find some cases of the string in the input.  */ */
-/* OBSOLETE  */
-/* OBSOLETE   static char bpt[] = "@"; */
-/* OBSOLETE   /* It would be tempting to look for "\n[__exit + 0x8]\n" */
-/* OBSOLETE      but that requires loading symbols with "yc i" and even if */
-/* OBSOLETE      we did do that we don't know that the file has symbols.  */ */
-/* OBSOLETE   static char exitmsg[] = "@????????I    JMPTI     GR121,LR0"; */
-/* OBSOLETE   char *bp = bpt; */
-/* OBSOLETE   char *ep = exitmsg; */
-/* OBSOLETE  */
-/* OBSOLETE   /* Large enough for either sizeof (bpt) or sizeof (exitmsg) chars.  */ */
-/* OBSOLETE   char swallowed[50]; */
-/* OBSOLETE   /* Current position in swallowed.  */ */
-/* OBSOLETE   char *swallowed_p = swallowed; */
-/* OBSOLETE  */
-/* OBSOLETE   int ch; */
-/* OBSOLETE   int ch_handled; */
-/* OBSOLETE   int old_timeout = timeout; */
-/* OBSOLETE   int old_immediate_quit = immediate_quit; */
-/* OBSOLETE  */
-/* OBSOLETE   status->kind = TARGET_WAITKIND_EXITED; */
-/* OBSOLETE   status->value.integer = 0; */
-/* OBSOLETE  */
-/* OBSOLETE   if (need_artificial_trap != 0) */
-/* OBSOLETE     { */
-/* OBSOLETE       status->kind = TARGET_WAITKIND_STOPPED; */
-/* OBSOLETE       status->value.sig = TARGET_SIGNAL_TRAP; */
-/* OBSOLETE       need_artificial_trap--; */
-/* OBSOLETE       return inferior_ptid; */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   timeout = 0;			/* Don't time out -- user program is running. */ */
-/* OBSOLETE   immediate_quit = 1;		/* Helps ability to QUIT */ */
-/* OBSOLETE   while (1) */
-/* OBSOLETE     { */
-/* OBSOLETE       QUIT;			/* Let user quit and leave process running */ */
-/* OBSOLETE       ch_handled = 0; */
-/* OBSOLETE       ch = readchar (); */
-/* OBSOLETE       if (ch == *bp) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  bp++; */
-/* OBSOLETE 	  if (*bp == '\0') */
-/* OBSOLETE 	    break; */
-/* OBSOLETE 	  ch_handled = 1; */
-/* OBSOLETE  */
-/* OBSOLETE 	  *swallowed_p++ = ch; */
-/* OBSOLETE 	} */
-/* OBSOLETE       else */
-/* OBSOLETE 	bp = bpt; */
-/* OBSOLETE       if (ch == *ep || *ep == '?') */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  ep++; */
-/* OBSOLETE 	  if (*ep == '\0') */
-/* OBSOLETE 	    break; */
-/* OBSOLETE  */
-/* OBSOLETE 	  if (!ch_handled) */
-/* OBSOLETE 	    *swallowed_p++ = ch; */
-/* OBSOLETE 	  ch_handled = 1; */
-/* OBSOLETE 	} */
-/* OBSOLETE       else */
-/* OBSOLETE 	ep = exitmsg; */
-/* OBSOLETE       if (!ch_handled) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  char *p; */
-/* OBSOLETE 	  /* Print out any characters which have been swallowed.  */ */
-/* OBSOLETE 	  for (p = swallowed; p < swallowed_p; ++p) */
-/* OBSOLETE 	    putc (*p, stdout); */
-/* OBSOLETE 	  swallowed_p = swallowed; */
-/* OBSOLETE 	  putc (ch, stdout); */
-/* OBSOLETE 	} */
-/* OBSOLETE     } */
-/* OBSOLETE   expect_prompt (); */
-/* OBSOLETE   if (*bp == '\0') */
-/* OBSOLETE     { */
-/* OBSOLETE       status->kind = TARGET_WAITKIND_STOPPED; */
-/* OBSOLETE       status->value.sig = TARGET_SIGNAL_TRAP; */
-/* OBSOLETE     } */
-/* OBSOLETE   else */
-/* OBSOLETE     { */
-/* OBSOLETE       status->kind = TARGET_WAITKIND_EXITED; */
-/* OBSOLETE       status->value.integer = 0; */
-/* OBSOLETE     } */
-/* OBSOLETE   timeout = old_timeout; */
-/* OBSOLETE   immediate_quit = old_immediate_quit; */
-/* OBSOLETE   return inferior_ptid; */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Return the name of register number REGNO */
-/* OBSOLETE    in the form input and output by adapt. */
-/* OBSOLETE  */
-/* OBSOLETE    Returns a pointer to a static buffer containing the answer.  */ */
-/* OBSOLETE static char * */
-/* OBSOLETE get_reg_name (int regno) */
-/* OBSOLETE { */
-/* OBSOLETE   static char buf[80]; */
-/* OBSOLETE   if (regno >= GR96_REGNUM && regno < GR96_REGNUM + 32) */
-/* OBSOLETE     sprintf (buf, "GR%03d", regno - GR96_REGNUM + 96); */
-/* OBSOLETE #if defined(GR64_REGNUM) */
-/* OBSOLETE   else if (regno >= GR64_REGNUM && regno < GR64_REGNUM + 32) */
-/* OBSOLETE     sprintf (buf, "GR%03d", regno - GR64_REGNUM + 64); */
-/* OBSOLETE #endif */
-/* OBSOLETE   else if (regno >= LR0_REGNUM && regno < LR0_REGNUM + 128) */
-/* OBSOLETE     sprintf (buf, "LR%03d", regno - LR0_REGNUM); */
-/* OBSOLETE   else if (regno == Q_REGNUM) */
-/* OBSOLETE     strcpy (buf, "SR131"); */
-/* OBSOLETE   else if (regno >= BP_REGNUM && regno <= CR_REGNUM) */
-/* OBSOLETE     sprintf (buf, "SR%03d", regno - BP_REGNUM + 133); */
-/* OBSOLETE   else if (regno == ALU_REGNUM) */
-/* OBSOLETE     strcpy (buf, "SR132"); */
-/* OBSOLETE   else if (regno >= IPC_REGNUM && regno <= IPB_REGNUM) */
-/* OBSOLETE     sprintf (buf, "SR%03d", regno - IPC_REGNUM + 128); */
-/* OBSOLETE   else if (regno >= VAB_REGNUM && regno <= LRU_REGNUM) */
-/* OBSOLETE     { */
-/* OBSOLETE       /* When a 29050 is in freeze-mode, read shadow pcs instead */ */
-/* OBSOLETE       if ((regno >= NPC_REGNUM && regno <= PC2_REGNUM) && USE_SHADOW_PC) */
-/* OBSOLETE 	sprintf (buf, "SR%03d", regno - NPC_REGNUM + 20); */
-/* OBSOLETE       else */
-/* OBSOLETE 	sprintf (buf, "SR%03d", regno - VAB_REGNUM); */
-/* OBSOLETE     } */
-/* OBSOLETE   else if (regno == GR1_REGNUM) */
-/* OBSOLETE     strcpy (buf, "GR001"); */
-/* OBSOLETE   return buf; */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Read the remote registers.  */ */
-/* OBSOLETE  */
-/* OBSOLETE static void */
-/* OBSOLETE adapt_fetch_registers (void) */
-/* OBSOLETE { */
-/* OBSOLETE   int reg_index; */
-/* OBSOLETE   int regnum_index; */
-/* OBSOLETE   char tempbuf[10]; */
-/* OBSOLETE   int sreg_buf[16]; */
-/* OBSOLETE   int i, j; */
-/* OBSOLETE  */
-/* OBSOLETE /*  */
-/* OBSOLETE  * Global registers */
-/* OBSOLETE  */ */
-/* OBSOLETE #if defined(GR64_REGNUM) */
-/* OBSOLETE   write (adapt_desc, "dw gr64,gr95\r", 13); */
-/* OBSOLETE   for (reg_index = 64, regnum_index = GR64_REGNUM; */
-/* OBSOLETE        reg_index < 96; */
-/* OBSOLETE        reg_index += 4, regnum_index += 4) */
-/* OBSOLETE     { */
-/* OBSOLETE       sprintf (tempbuf, "GR%03d ", reg_index); */
-/* OBSOLETE       expect (tempbuf); */
-/* OBSOLETE       get_hex_regs (4, regnum_index); */
-/* OBSOLETE       expect ("\n"); */
-/* OBSOLETE     } */
-/* OBSOLETE #endif */
-/* OBSOLETE   write (adapt_desc, "dw gr96,gr127\r", 14); */
-/* OBSOLETE   for (reg_index = 96, regnum_index = GR96_REGNUM; */
-/* OBSOLETE        reg_index < 128; */
-/* OBSOLETE        reg_index += 4, regnum_index += 4) */
-/* OBSOLETE     { */
-/* OBSOLETE       sprintf (tempbuf, "GR%03d ", reg_index); */
-/* OBSOLETE       expect (tempbuf); */
-/* OBSOLETE       get_hex_regs (4, regnum_index); */
-/* OBSOLETE       expect ("\n"); */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE /*  */
-/* OBSOLETE  * Local registers */
-/* OBSOLETE  */ */
-/* OBSOLETE   for (i = 0; i < 128; i += 32) */
-/* OBSOLETE     { */
-/* OBSOLETE       /* The PC has a tendency to hang if we get these */
-/* OBSOLETE          all in one fell swoop ("dw lr0,lr127").  */ */
-/* OBSOLETE       sprintf (tempbuf, "dw lr%d\r", i); */
-/* OBSOLETE       write (adapt_desc, tempbuf, strlen (tempbuf)); */
-/* OBSOLETE       for (reg_index = i, regnum_index = LR0_REGNUM + i; */
-/* OBSOLETE 	   reg_index < i + 32; */
-/* OBSOLETE 	   reg_index += 4, regnum_index += 4) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  sprintf (tempbuf, "LR%03d ", reg_index); */
-/* OBSOLETE 	  expect (tempbuf); */
-/* OBSOLETE 	  get_hex_regs (4, regnum_index); */
-/* OBSOLETE 	  expect ("\n"); */
-/* OBSOLETE 	} */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE /*  */
-/* OBSOLETE  * Special registers */
-/* OBSOLETE  */ */
-/* OBSOLETE   sprintf (tempbuf, "dw sr0\r"); */
-/* OBSOLETE   write (adapt_desc, tempbuf, strlen (tempbuf)); */
-/* OBSOLETE   for (i = 0; i < 4; i++) */
-/* OBSOLETE     {				/* SR0 - SR14 */ */
-/* OBSOLETE       sprintf (tempbuf, "SR%3d", i * 4); */
-/* OBSOLETE       expect (tempbuf); */
-/* OBSOLETE       for (j = 0; j < (i == 3 ? 3 : 4); j++) */
-/* OBSOLETE 	sreg_buf[i * 4 + j] = get_hex_word (); */
-/* OBSOLETE     } */
-/* OBSOLETE   expect_prompt (); */
-/* OBSOLETE   /*  */
-/* OBSOLETE    * Read the pcs individually if we are in freeze mode. */
-/* OBSOLETE    * See get_reg_name(), it translates the register names for the pcs to */
-/* OBSOLETE    * the names of the shadow pcs. */
-/* OBSOLETE    */ */
-/* OBSOLETE   if (USE_SHADOW_PC) */
-/* OBSOLETE     { */
-/* OBSOLETE       sreg_buf[10] = read_register (NPC_REGNUM);	/* pc0 */ */
-/* OBSOLETE       sreg_buf[11] = read_register (PC_REGNUM);		/* pc1 */ */
-/* OBSOLETE       sreg_buf[12] = read_register (PC2_REGNUM);	/* pc2 */ */
-/* OBSOLETE     } */
-/* OBSOLETE   for (i = 0; i < 14; i++)	/* Supply vab -> lru */ */
-/* OBSOLETE     supply_register (VAB_REGNUM + i, (char *) &sreg_buf[i]); */
-/* OBSOLETE   sprintf (tempbuf, "dw sr128\r"); */
-/* OBSOLETE   write (adapt_desc, tempbuf, strlen (tempbuf)); */
-/* OBSOLETE   for (i = 0; i < 2; i++) */
-/* OBSOLETE     {				/* SR128 - SR135 */ */
-/* OBSOLETE       sprintf (tempbuf, "SR%3d", 128 + i * 4); */
-/* OBSOLETE       expect (tempbuf); */
-/* OBSOLETE       for (j = 0; j < 4; j++) */
-/* OBSOLETE 	sreg_buf[i * 4 + j] = get_hex_word (); */
-/* OBSOLETE     } */
-/* OBSOLETE   expect_prompt (); */
-/* OBSOLETE   supply_register (IPC_REGNUM, (char *) &sreg_buf[0]); */
-/* OBSOLETE   supply_register (IPA_REGNUM, (char *) &sreg_buf[1]); */
-/* OBSOLETE   supply_register (IPB_REGNUM, (char *) &sreg_buf[2]); */
-/* OBSOLETE   supply_register (Q_REGNUM, (char *) &sreg_buf[3]); */
-/* OBSOLETE   /* Skip ALU */ */
-/* OBSOLETE   supply_register (BP_REGNUM, (char *) &sreg_buf[5]); */
-/* OBSOLETE   supply_register (FC_REGNUM, (char *) &sreg_buf[6]); */
-/* OBSOLETE   supply_register (CR_REGNUM, (char *) &sreg_buf[7]); */
-/* OBSOLETE  */
-/* OBSOLETE   /* There doesn't seem to be any way to get these.  */ */
-/* OBSOLETE   { */
-/* OBSOLETE     int val = -1; */
-/* OBSOLETE     supply_register (FPE_REGNUM, (char *) &val); */
-/* OBSOLETE     supply_register (INTE_REGNUM, (char *) &val); */
-/* OBSOLETE     supply_register (FPS_REGNUM, (char *) &val); */
-/* OBSOLETE     supply_register (EXO_REGNUM, (char *) &val); */
-/* OBSOLETE   } */
-/* OBSOLETE  */
-/* OBSOLETE   write (adapt_desc, "dw gr1,gr1\r", 11); */
-/* OBSOLETE   expect ("GR001 "); */
-/* OBSOLETE   get_hex_regs (1, GR1_REGNUM); */
-/* OBSOLETE   expect_prompt (); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Fetch register REGNO, or all registers if REGNO is -1. */
-/* OBSOLETE  */ */
-/* OBSOLETE static void */
-/* OBSOLETE adapt_fetch_register (int regno) */
-/* OBSOLETE { */
-/* OBSOLETE   if (regno == -1) */
-/* OBSOLETE     adapt_fetch_registers (); */
-/* OBSOLETE   else */
-/* OBSOLETE     { */
-/* OBSOLETE       char *name = get_reg_name (regno); */
-/* OBSOLETE       fprintf (adapt_stream, "dw %s,%s\r", name, name); */
-/* OBSOLETE       expect (name); */
-/* OBSOLETE       expect (" "); */
-/* OBSOLETE       get_hex_regs (1, regno); */
-/* OBSOLETE       expect_prompt (); */
-/* OBSOLETE     } */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Store the remote registers from the contents of the block REGS.  */ */
-/* OBSOLETE  */
-/* OBSOLETE static void */
-/* OBSOLETE adapt_store_registers (void) */
-/* OBSOLETE { */
-/* OBSOLETE   int i, j; */
-/* OBSOLETE  */
-/* OBSOLETE   fprintf (adapt_stream, "s gr1,%x\r", read_register (GR1_REGNUM)); */
-/* OBSOLETE   expect_prompt (); */
-/* OBSOLETE  */
-/* OBSOLETE #if defined(GR64_REGNUM) */
-/* OBSOLETE   for (j = 0; j < 32; j += 16) */
-/* OBSOLETE     { */
-/* OBSOLETE       fprintf (adapt_stream, "s gr%d,", j + 64); */
-/* OBSOLETE       for (i = 0; i < 15; ++i) */
-/* OBSOLETE 	fprintf (adapt_stream, "%x,", read_register (GR64_REGNUM + j + i)); */
-/* OBSOLETE       fprintf (adapt_stream, "%x\r", read_register (GR64_REGNUM + j + 15)); */
-/* OBSOLETE       expect_prompt (); */
-/* OBSOLETE     } */
-/* OBSOLETE #endif */
-/* OBSOLETE   for (j = 0; j < 32; j += 16) */
-/* OBSOLETE     { */
-/* OBSOLETE       fprintf (adapt_stream, "s gr%d,", j + 96); */
-/* OBSOLETE       for (i = 0; i < 15; ++i) */
-/* OBSOLETE 	fprintf (adapt_stream, "%x,", read_register (GR96_REGNUM + j + i)); */
-/* OBSOLETE       fprintf (adapt_stream, "%x\r", read_register (GR96_REGNUM + j + 15)); */
-/* OBSOLETE       expect_prompt (); */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   for (j = 0; j < 128; j += 16) */
-/* OBSOLETE     { */
-/* OBSOLETE       fprintf (adapt_stream, "s lr%d,", j); */
-/* OBSOLETE       for (i = 0; i < 15; ++i) */
-/* OBSOLETE 	fprintf (adapt_stream, "%x,", read_register (LR0_REGNUM + j + i)); */
-/* OBSOLETE       fprintf (adapt_stream, "%x\r", read_register (LR0_REGNUM + j + 15)); */
-/* OBSOLETE       expect_prompt (); */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   fprintf (adapt_stream, "s sr128,%x,%x,%x\r", read_register (IPC_REGNUM), */
-/* OBSOLETE 	   read_register (IPA_REGNUM), read_register (IPB_REGNUM)); */
-/* OBSOLETE   expect_prompt (); */
-/* OBSOLETE   fprintf (adapt_stream, "s sr133,%x,%x,%x\r", read_register (BP_REGNUM), */
-/* OBSOLETE 	   read_register (FC_REGNUM), read_register (CR_REGNUM)); */
-/* OBSOLETE   expect_prompt (); */
-/* OBSOLETE   fprintf (adapt_stream, "s sr131,%x\r", read_register (Q_REGNUM)); */
-/* OBSOLETE   expect_prompt (); */
-/* OBSOLETE   fprintf (adapt_stream, "s sr0,"); */
-/* OBSOLETE   for (i = 0; i < 7; ++i) */
-/* OBSOLETE     fprintf (adapt_stream, "%x,", read_register (VAB_REGNUM + i)); */
-/* OBSOLETE   expect_prompt (); */
-/* OBSOLETE   fprintf (adapt_stream, "s sr7,"); */
-/* OBSOLETE   for (i = 7; i < 14; ++i) */
-/* OBSOLETE     fprintf (adapt_stream, "%x,", read_register (VAB_REGNUM + i)); */
-/* OBSOLETE   expect_prompt (); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Store register REGNO, or all if REGNO == -1. */
-/* OBSOLETE    Return errno value.  */ */
-/* OBSOLETE void */
-/* OBSOLETE adapt_store_register (int regno) */
-/* OBSOLETE { */
-/* OBSOLETE   /* printf("adapt_store_register() called.\n"); fflush(stdout); /* */ */
-/* OBSOLETE   if (regno == -1) */
-/* OBSOLETE     adapt_store_registers (); */
-/* OBSOLETE   else */
-/* OBSOLETE     { */
-/* OBSOLETE       char *name = get_reg_name (regno); */
-/* OBSOLETE       fprintf (adapt_stream, "s %s,%x\r", name, read_register (regno)); */
-/* OBSOLETE       /* Setting GR1 changes the numbers of all the locals, so */
-/* OBSOLETE          invalidate the register cache.  Do this *after* calling */
-/* OBSOLETE          read_register, because we want read_register to return the */
-/* OBSOLETE          value that write_register has just stuffed into the registers */
-/* OBSOLETE          array, not the value of the register fetched from the */
-/* OBSOLETE          inferior.  */ */
-/* OBSOLETE       if (regno == GR1_REGNUM) */
-/* OBSOLETE 	registers_changed (); */
-/* OBSOLETE       expect_prompt (); */
-/* OBSOLETE     } */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Get ready to modify the registers array.  On machines which store */
-/* OBSOLETE    individual registers, this doesn't need to do anything.  On machines */
-/* OBSOLETE    which store all the registers in one fell swoop, this makes sure */
-/* OBSOLETE    that registers contains all the registers from the program being */
-/* OBSOLETE    debugged.  */ */
-/* OBSOLETE  */
-/* OBSOLETE void */
-/* OBSOLETE adapt_prepare_to_store (void) */
-/* OBSOLETE { */
-/* OBSOLETE   /* Do nothing, since we can store individual regs */ */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE static CORE_ADDR */
-/* OBSOLETE translate_addr (CORE_ADDR addr) */
-/* OBSOLETE { */
-/* OBSOLETE #if defined(KERNEL_DEBUGGING) */
-/* OBSOLETE   /* Check for a virtual address in the kernel */ */
-/* OBSOLETE   /* Assume physical address of ublock is in  paddr_u register */ */
-/* OBSOLETE   if (addr >= UVADDR) */
-/* OBSOLETE     { */
-/* OBSOLETE       /* PADDR_U register holds the physical address of the ublock */ */
-/* OBSOLETE       CORE_ADDR i = (CORE_ADDR) read_register (PADDR_U_REGNUM); */
-/* OBSOLETE       return (i + addr - (CORE_ADDR) UVADDR); */
-/* OBSOLETE     } */
-/* OBSOLETE   else */
-/* OBSOLETE     { */
-/* OBSOLETE       return (addr); */
-/* OBSOLETE     } */
-/* OBSOLETE #else */
-/* OBSOLETE   return (addr); */
-/* OBSOLETE #endif */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE  */
-/* OBSOLETE /* FIXME!  Merge these two.  */ */
-/* OBSOLETE int */
-/* OBSOLETE adapt_xfer_inferior_memory (CORE_ADDR memaddr, char *myaddr, int len, int write, */
-/* OBSOLETE 			    struct mem_attrib *attrib ATTRIBUTE_UNUSED, */
-/* OBSOLETE 			    struct target_ops *target ATTRIBUTE_UNUSED) */
-/* OBSOLETE { */
-/* OBSOLETE  */
-/* OBSOLETE   memaddr = translate_addr (memaddr); */
-/* OBSOLETE  */
-/* OBSOLETE   if (write) */
-/* OBSOLETE     return adapt_write_inferior_memory (memaddr, myaddr, len); */
-/* OBSOLETE   else */
-/* OBSOLETE     return adapt_read_inferior_memory (memaddr, myaddr, len); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE void */
-/* OBSOLETE adapt_files_info (void) */
-/* OBSOLETE { */
-/* OBSOLETE   printf_filtered ("\tAttached to %s at %d baud and running program %s\n", */
-/* OBSOLETE 		   dev_name, baudrate, prog_name); */
-/* OBSOLETE   printf_filtered ("\ton an %s processor.\n", processor_name[processor_type]); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Copy LEN bytes of data from debugger memory at MYADDR */
-/* OBSOLETE    to inferior's memory at MEMADDR.  Returns errno value.   */
-/* OBSOLETE    * sb/sh instructions don't work on unaligned addresses, when TU=1.  */
-/* OBSOLETE  */ */
-/* OBSOLETE int */
-/* OBSOLETE adapt_write_inferior_memory (CORE_ADDR memaddr, char *myaddr, int len) */
-/* OBSOLETE { */
-/* OBSOLETE   int i; */
-/* OBSOLETE   unsigned int cps; */
-/* OBSOLETE  */
-/* OBSOLETE   /* Turn TU bit off so we can do 'sb' commands */ */
-/* OBSOLETE   cps = read_register (CPS_REGNUM); */
-/* OBSOLETE   if (cps & 0x00000800) */
-/* OBSOLETE     write_register (CPS_REGNUM, cps & ~(0x00000800)); */
-/* OBSOLETE  */
-/* OBSOLETE   for (i = 0; i < len; i++) */
-/* OBSOLETE     { */
-/* OBSOLETE       if ((i % 16) == 0) */
-/* OBSOLETE 	fprintf (adapt_stream, "sb %x,", memaddr + i); */
-/* OBSOLETE       if ((i % 16) == 15 || i == len - 1) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  fprintf (adapt_stream, "%x\r", ((unsigned char *) myaddr)[i]); */
-/* OBSOLETE 	  expect_prompt (); */
-/* OBSOLETE 	} */
-/* OBSOLETE       else */
-/* OBSOLETE 	fprintf (adapt_stream, "%x,", ((unsigned char *) myaddr)[i]); */
-/* OBSOLETE     } */
-/* OBSOLETE   /* Restore the old value of cps if the TU bit was on */ */
-/* OBSOLETE   if (cps & 0x00000800) */
-/* OBSOLETE     write_register (CPS_REGNUM, cps); */
-/* OBSOLETE   return len; */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Read LEN bytes from inferior memory at MEMADDR.  Put the result */
-/* OBSOLETE    at debugger address MYADDR.  Returns errno value.  */ */
-/* OBSOLETE int */
-/* OBSOLETE adapt_read_inferior_memory (CORE_ADDR memaddr, char *myaddr, int len) */
-/* OBSOLETE { */
-/* OBSOLETE   int i; */
-/* OBSOLETE  */
-/* OBSOLETE   /* Number of bytes read so far.  */ */
-/* OBSOLETE   int count; */
-/* OBSOLETE  */
-/* OBSOLETE   /* Starting address of this pass.  */ */
-/* OBSOLETE   unsigned long startaddr; */
-/* OBSOLETE  */
-/* OBSOLETE   /* Number of bytes to read in this pass.  */ */
-/* OBSOLETE   int len_this_pass; */
-/* OBSOLETE  */
-/* OBSOLETE   /* Note that this code works correctly if startaddr is just less */
-/* OBSOLETE      than UINT_MAX (well, really CORE_ADDR_MAX if there was such a */
-/* OBSOLETE      thing).  That is, something like */
-/* OBSOLETE      adapt_read_bytes (CORE_ADDR_MAX - 4, foo, 4) */
-/* OBSOLETE      works--it never adds len to memaddr and gets 0.  */ */
-/* OBSOLETE   /* However, something like */
-/* OBSOLETE      adapt_read_bytes (CORE_ADDR_MAX - 3, foo, 4) */
-/* OBSOLETE      doesn't need to work.  Detect it and give up if there's an attempt */
-/* OBSOLETE      to do that.  */ */
-/* OBSOLETE  */
-/* OBSOLETE   if (((memaddr - 1) + len) < memaddr) */
-/* OBSOLETE     return EIO; */
-/* OBSOLETE  */
-/* OBSOLETE   startaddr = memaddr; */
-/* OBSOLETE   count = 0; */
-/* OBSOLETE   while (count < len) */
-/* OBSOLETE     { */
-/* OBSOLETE       len_this_pass = 16; */
-/* OBSOLETE       if ((startaddr % 16) != 0) */
-/* OBSOLETE 	len_this_pass -= startaddr % 16; */
-/* OBSOLETE       if (len_this_pass > (len - count)) */
-/* OBSOLETE 	len_this_pass = (len - count); */
-/* OBSOLETE  */
-/* OBSOLETE       fprintf (adapt_stream, "db %x,%x\r", startaddr, */
-/* OBSOLETE 	       (startaddr - 1) + len_this_pass); */
-/* OBSOLETE  */
-/* OBSOLETE #ifdef NOTDEF			/* Why do this */ */
-/* OBSOLETE       expect ("\n"); */
-/* OBSOLETE       /* Look for 8 hex digits.  */ */
-/* OBSOLETE       i = 0; */
-/* OBSOLETE       while (1) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  if (isxdigit (readchar ())) */
-/* OBSOLETE 	    ++i; */
-/* OBSOLETE 	  else */
-/* OBSOLETE 	    { */
-/* OBSOLETE 	      expect_prompt (); */
-/* OBSOLETE 	      error ("Hex digit expected from remote system."); */
-/* OBSOLETE 	    } */
-/* OBSOLETE 	  if (i >= 8) */
-/* OBSOLETE 	    break; */
-/* OBSOLETE 	} */
-/* OBSOLETE #endif /* NOTDEF */ */
-/* OBSOLETE  */
-/* OBSOLETE       expect ("  "); */
-/* OBSOLETE  */
-/* OBSOLETE       for (i = 0; i < len_this_pass; i++) */
-/* OBSOLETE 	get_hex_byte (&myaddr[count++]); */
-/* OBSOLETE  */
-/* OBSOLETE       expect_prompt (); */
-/* OBSOLETE  */
-/* OBSOLETE       startaddr += len_this_pass; */
-/* OBSOLETE     } */
-/* OBSOLETE   return count; */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE #define MAX_BREAKS	8 */
-/* OBSOLETE static int num_brkpts = 0; */
-/* OBSOLETE  */
-/* OBSOLETE /* Insert a breakpoint at ADDR.  SAVE is normally the address of the */
-/* OBSOLETE    pattern buffer where the instruction that the breakpoint overwrites */
-/* OBSOLETE    is saved.  It is unused here since the Adapt Monitor is responsible */
-/* OBSOLETE    for saving/restoring the original instruction. */ */
-/* OBSOLETE  */
-/* OBSOLETE static int */
-/* OBSOLETE adapt_insert_breakpoint (CORE_ADDR addr, char *save) */
-/* OBSOLETE { */
-/* OBSOLETE   if (num_brkpts < MAX_BREAKS) */
-/* OBSOLETE     { */
-/* OBSOLETE       num_brkpts++; */
-/* OBSOLETE       fprintf (adapt_stream, "B %x", addr); */
-/* OBSOLETE       fprintf (adapt_stream, "\r"); */
-/* OBSOLETE       expect_prompt (); */
-/* OBSOLETE       return (0);		/* Success */ */
-/* OBSOLETE     } */
-/* OBSOLETE   else */
-/* OBSOLETE     { */
-/* OBSOLETE       fprintf_filtered (gdb_stderr, */
-/* OBSOLETE 		      "Too many break points, break point not installed\n"); */
-/* OBSOLETE       return (1);		/* Failure */ */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Remove a breakpoint at ADDR.  SAVE is normally the previously */
-/* OBSOLETE    saved pattern, but is unused here as the Adapt Monitor is */
-/* OBSOLETE    responsible for saving/restoring instructions. */ */
-/* OBSOLETE  */
-/* OBSOLETE static int */
-/* OBSOLETE adapt_remove_breakpoint (CORE_ADDR addr, char *save) */
-/* OBSOLETE { */
-/* OBSOLETE   if (num_brkpts > 0) */
-/* OBSOLETE     { */
-/* OBSOLETE       num_brkpts--; */
-/* OBSOLETE       fprintf (adapt_stream, "BR %x", addr); */
-/* OBSOLETE       fprintf (adapt_stream, "\r"); */
-/* OBSOLETE       fflush (adapt_stream); */
-/* OBSOLETE       expect_prompt (); */
-/* OBSOLETE     } */
-/* OBSOLETE   return (0); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Clear the adapts notion of what the break points are */ */
-/* OBSOLETE static int */
-/* OBSOLETE adapt_clear_breakpoints (void) */
-/* OBSOLETE { */
-/* OBSOLETE   if (adapt_stream) */
-/* OBSOLETE     { */
-/* OBSOLETE       fprintf (adapt_stream, "BR");	/* Clear all break points */ */
-/* OBSOLETE       fprintf (adapt_stream, "\r"); */
-/* OBSOLETE       fflush (adapt_stream); */
-/* OBSOLETE       expect_prompt (); */
-/* OBSOLETE     } */
-/* OBSOLETE   num_brkpts = 0; */
-/* OBSOLETE } */
-/* OBSOLETE static void */
-/* OBSOLETE adapt_mourn (void) */
-/* OBSOLETE { */
-/* OBSOLETE   adapt_clear_breakpoints (); */
-/* OBSOLETE   pop_target ();		/* Pop back to no-child state */ */
-/* OBSOLETE   generic_mourn_inferior (); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Display everthing we read in from the adapt until we match/see the */
-/* OBSOLETE  * specified string */
-/* OBSOLETE  */ */
-/* OBSOLETE static int */
-/* OBSOLETE display_until (char *str) */
-/* OBSOLETE { */
-/* OBSOLETE   int i = 0, j, c; */
-/* OBSOLETE  */
-/* OBSOLETE   while (c = readchar ()) */
-/* OBSOLETE     { */
-/* OBSOLETE       if (c == str[i]) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  i++; */
-/* OBSOLETE 	  if (i == strlen (str)) */
-/* OBSOLETE 	    return; */
-/* OBSOLETE 	} */
-/* OBSOLETE       else */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  if (i) */
-/* OBSOLETE 	    { */
-/* OBSOLETE 	      for (j = 0; j < i; j++)	/* Put everthing we matched */ */
-/* OBSOLETE 		putchar (str[j]); */
-/* OBSOLETE 	      i = 0; */
-/* OBSOLETE 	    } */
-/* OBSOLETE 	  putchar (c); */
-/* OBSOLETE 	} */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE  */
-/* OBSOLETE /* Put a command string, in args, out to the adapt.  The adapt is assumed to */
-/* OBSOLETE    be in raw mode, all writing/reading done through adapt_desc. */
-/* OBSOLETE    Ouput from the adapt is placed on the users terminal until the */
-/* OBSOLETE    prompt from the adapt is seen. */
-/* OBSOLETE    FIXME: Can't handle commands that take input.  */ */
-/* OBSOLETE  */
-/* OBSOLETE void */
-/* OBSOLETE adapt_com (char *args, int fromtty) */
-/* OBSOLETE { */
-/* OBSOLETE   if (!adapt_stream) */
-/* OBSOLETE     { */
-/* OBSOLETE       printf_filtered ("Adapt not open.  Use the 'target' command to open.\n"); */
-/* OBSOLETE       return; */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   /* Clear all input so only command relative output is displayed */ */
-/* OBSOLETE   slurp_input (); */
-/* OBSOLETE  */
-/* OBSOLETE   switch (islower (args[0]) ? toupper (args[0]) : args[0]) */
-/* OBSOLETE     { */
-/* OBSOLETE     default: */
-/* OBSOLETE       printf_filtered ("Unknown/Unimplemented adapt command '%s'\n", args); */
-/* OBSOLETE       break; */
-/* OBSOLETE     case 'G':			/* Go, begin execution */ */
-/* OBSOLETE       write (adapt_desc, args, strlen (args)); */
-/* OBSOLETE       write (adapt_desc, "\r", 1); */
-/* OBSOLETE       expect_prompt (); */
-/* OBSOLETE       break; */
-/* OBSOLETE     case 'B':			/* Break points, B or BR */ */
-/* OBSOLETE     case 'C':			/* Check current 29k status (running/halted) */ */
-/* OBSOLETE     case 'D':			/* Display data/registers */ */
-/* OBSOLETE     case 'I':			/* Input from i/o space */ */
-/* OBSOLETE     case 'J':			/* Jam an instruction */ */
-/* OBSOLETE     case 'K':			/* Kill, stop execution */ */
-/* OBSOLETE     case 'L':			/* Disassemble */ */
-/* OBSOLETE     case 'O':			/* Output to i/o space */ */
-/* OBSOLETE     case 'T':			/* Trace */ */
-/* OBSOLETE     case 'P':			/* Pulse an input line */ */
-/* OBSOLETE     case 'X':			/* Examine special purpose registers */ */
-/* OBSOLETE     case 'Z':			/* Display trace buffer */ */
-/* OBSOLETE       write (adapt_desc, args, strlen (args)); */
-/* OBSOLETE       write (adapt_desc, "\r", 1); */
-/* OBSOLETE       expect (args);		/* Don't display the command */ */
-/* OBSOLETE       display_until ("# "); */
-/* OBSOLETE       break; */
-/* OBSOLETE       /* Begin commands that take input in the form 'c x,y[,z...]' */ */
-/* OBSOLETE     case 'S':			/* Set memory or register */ */
-/* OBSOLETE       if (strchr (args, ',')) */
-/* OBSOLETE 	{			/* Assume it is properly formatted */ */
-/* OBSOLETE 	  write (adapt_desc, args, strlen (args)); */
-/* OBSOLETE 	  write (adapt_desc, "\r", 1); */
-/* OBSOLETE 	  expect_prompt (); */
-/* OBSOLETE 	} */
-/* OBSOLETE       break; */
-/* OBSOLETE     } */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Define the target subroutine names */ */
-/* OBSOLETE  */
-/* OBSOLETE struct target_ops adapt_ops; */
-/* OBSOLETE  */
-/* OBSOLETE static void */
-/* OBSOLETE init_adapt_ops (void) */
-/* OBSOLETE { */
-/* OBSOLETE   adapt_ops.to_shortname = "adapt"; */
-/* OBSOLETE   adapt_ops.to_longname = "Remote AMD `Adapt' target"; */
-/* OBSOLETE   adapt_ops.to_doc = "Remote debug an AMD 290*0 using an `Adapt' monitor via RS232"; */
-/* OBSOLETE   adapt_ops.to_open = adapt_open; */
-/* OBSOLETE   adapt_ops.to_close = adapt_close; */
-/* OBSOLETE   adapt_ops.to_attach = adapt_attach; */
-/* OBSOLETE   adapt_ops.to_post_attach = NULL; */
-/* OBSOLETE   adapt_ops.to_require_attach = NULL; */
-/* OBSOLETE   adapt_ops.to_detach = adapt_detach; */
-/* OBSOLETE   adapt_ops.to_require_detach = NULL; */
-/* OBSOLETE   adapt_ops.to_resume = adapt_resume; */
-/* OBSOLETE   adapt_ops.to_wait = adapt_wait; */
-/* OBSOLETE   adapt_ops.to_post_wait = NULL; */
-/* OBSOLETE   adapt_ops.to_fetch_registers = adapt_fetch_register; */
-/* OBSOLETE   adapt_ops.to_store_registers = adapt_store_register; */
-/* OBSOLETE   adapt_ops.to_prepare_to_store = adapt_prepare_to_store; */
-/* OBSOLETE   adapt_ops.to_xfer_memory = adapt_xfer_inferior_memory; */
-/* OBSOLETE   adapt_ops.to_files_info = adapt_files_info; */
-/* OBSOLETE   adapt_ops.to_insert_breakpoint = adapt_insert_breakpoint; */
-/* OBSOLETE   adapt_ops.to_remove_breakpoint = adapt_remove_breakpoint; */
-/* OBSOLETE   adapt_ops.to_terminal_init = 0; */
-/* OBSOLETE   adapt_ops.to_terminal_inferior = 0; */
-/* OBSOLETE   adapt_ops.to_terminal_ours_for_output = 0; */
-/* OBSOLETE   adapt_ops.to_terminal_ours = 0; */
-/* OBSOLETE   adapt_ops.to_terminal_info = 0; */
-/* OBSOLETE   adapt_ops.to_kill = adapt_kill; */
-/* OBSOLETE   adapt_ops.to_load = adapt_load; */
-/* OBSOLETE   adapt_ops.to_lookup_symbol = 0; */
-/* OBSOLETE   adapt_ops.to_create_inferior = adapt_create_inferior; */
-/* OBSOLETE   adapt_ops.to_post_startup_inferior = NULL; */
-/* OBSOLETE   adapt_ops.to_acknowledge_created_inferior = NULL; */
-/* OBSOLETE   adapt_ops.to_clone_and_follow_inferior = NULL; */
-/* OBSOLETE   adapt_ops.to_post_follow_inferior_by_clone = NULL; */
-/* OBSOLETE   adapt_ops.to_insert_fork_catchpoint = NULL; */
-/* OBSOLETE   adapt_ops.to_remove_fork_catchpoint = NULL; */
-/* OBSOLETE   adapt_ops.to_insert_vfork_catchpoint = NULL; */
-/* OBSOLETE   adapt_ops.to_remove_vfork_catchpoint = NULL; */
-/* OBSOLETE   adapt_ops.to_has_forked = NULL; */
-/* OBSOLETE   adapt_ops.to_has_vforked = NULL; */
-/* OBSOLETE   adapt_ops.to_can_follow_vfork_prior_to_exec = NULL; */
-/* OBSOLETE   adapt_ops.to_post_follow_vfork = NULL; */
-/* OBSOLETE   adapt_ops.to_insert_exec_catchpoint = NULL; */
-/* OBSOLETE   adapt_ops.to_remove_exec_catchpoint = NULL; */
-/* OBSOLETE   adapt_ops.to_has_execd = NULL; */
-/* OBSOLETE   adapt_ops.to_reported_exec_events_per_exec_call = NULL; */
-/* OBSOLETE   adapt_ops.to_has_exited = NULL; */
-/* OBSOLETE   adapt_ops.to_mourn_inferior = adapt_mourn; */
-/* OBSOLETE   adapt_ops.to_can_run = 0; */
-/* OBSOLETE   adapt_ops.to_notice_signals = 0; */
-/* OBSOLETE   adapt_ops.to_thread_alive = 0; */
-/* OBSOLETE   adapt_ops.to_stop = 0;	/* process_stratum; */ */
-/* OBSOLETE   adapt_ops.to_pid_to_exec_file = NULL; */
-/* OBSOLETE   adapt_ops.to_stratum = 0; */
-/* OBSOLETE   adapt_ops.DONT_USE = 0; */
-/* OBSOLETE   adapt_ops.to_has_all_memory = 1; */
-/* OBSOLETE   adapt_ops.to_has_memory = 1; */
-/* OBSOLETE   adapt_ops.to_has_stack = 1; */
-/* OBSOLETE   adapt_ops.to_has_registers = 1; */
-/* OBSOLETE   adapt_ops.to_has_execution = 0; */
-/* OBSOLETE   adapt_ops.to_sections = 0; */
-/* OBSOLETE   adapt_ops.to_sections_end = 0; */
-/* OBSOLETE   adapt_ops.to_magic = OPS_MAGIC; */
-/* OBSOLETE }				/* init_adapt_ops */ */
-/* OBSOLETE  */
-/* OBSOLETE void */
-/* OBSOLETE _initialize_remote_adapt (void) */
-/* OBSOLETE { */
-/* OBSOLETE   init_adapt_ops (); */
-/* OBSOLETE   add_target (&adapt_ops); */
-/* OBSOLETE   add_com ("adapt <command>", class_obscure, adapt_com, */
-/* OBSOLETE 	   "Send a command to the AMD Adapt remote monitor."); */
-/* OBSOLETE } */
diff --git a/gdb/remote-eb.c b/gdb/remote-eb.c
deleted file mode 100644
index dcee345..0000000
--- a/gdb/remote-eb.c
+++ /dev/null
@@ -1,1088 +0,0 @@
-/* OBSOLETE /* Remote debugging interface for AMD 29000 EBMON on IBM PC, for GDB. */
-/* OBSOLETE    Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1998, 1999, 2000, 2001 */
-/* OBSOLETE    Free Software Foundation, Inc. */
-/* OBSOLETE    Contributed by Cygnus Support.  Written by Jim Kingdon for Cygnus. */
-/* OBSOLETE  */
-/* OBSOLETE    This file is part of GDB. */
-/* OBSOLETE  */
-/* OBSOLETE    This program is free software; you can redistribute it and/or modify */
-/* OBSOLETE    it under the terms of the GNU General Public License as published by */
-/* OBSOLETE    the Free Software Foundation; either version 2 of the License, or */
-/* OBSOLETE    (at your option) any later version. */
-/* OBSOLETE  */
-/* OBSOLETE    This program is distributed in the hope that it will be useful, */
-/* OBSOLETE    but WITHOUT ANY WARRANTY; without even the implied warranty of */
-/* OBSOLETE    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the */
-/* OBSOLETE    GNU General Public License for more details. */
-/* OBSOLETE  */
-/* OBSOLETE    You should have received a copy of the GNU General Public License */
-/* OBSOLETE    along with this program; if not, write to the Free Software */
-/* OBSOLETE    Foundation, Inc., 59 Temple Place - Suite 330, */
-/* OBSOLETE    Boston, MA 02111-1307, USA.  */ */
-/* OBSOLETE  */
-/* OBSOLETE /* This is like remote.c but is for an esoteric situation-- */
-/* OBSOLETE    having a a29k board in a PC hooked up to a unix machine with */
-/* OBSOLETE    a serial line, and running ctty com1 on the PC, through which */
-/* OBSOLETE    the unix machine can run ebmon.  Not to mention that the PC */
-/* OBSOLETE    has PC/NFS, so it can access the same executables that gdb can, */
-/* OBSOLETE    over the net in real time.  */ */
-/* OBSOLETE  */
-/* OBSOLETE #include "defs.h" */
-/* OBSOLETE #include "gdb_string.h" */
-/* OBSOLETE #include "regcache.h" */
-/* OBSOLETE  */
-/* OBSOLETE #include "inferior.h" */
-/* OBSOLETE #include "bfd.h" */
-/* OBSOLETE #include "symfile.h" */
-/* OBSOLETE #include "value.h" */
-/* OBSOLETE #include <ctype.h> */
-/* OBSOLETE #include <fcntl.h> */
-/* OBSOLETE #include <signal.h> */
-/* OBSOLETE #include <errno.h> */
-/* OBSOLETE #include "terminal.h" */
-/* OBSOLETE #include "target.h" */
-/* OBSOLETE #include "gdbcore.h" */
-/* OBSOLETE  */
-/* OBSOLETE extern struct target_ops eb_ops;	/* Forward declaration */ */
-/* OBSOLETE  */
-/* OBSOLETE static void eb_close (); */
-/* OBSOLETE  */
-/* OBSOLETE #define LOG_FILE "eb.log" */
-/* OBSOLETE #if defined (LOG_FILE) */
-/* OBSOLETE FILE *log_file; */
-/* OBSOLETE #endif */
-/* OBSOLETE  */
-/* OBSOLETE static int timeout = 24; */
-/* OBSOLETE  */
-/* OBSOLETE /* Descriptor for I/O to remote machine.  Initialize it to -1 so that */
-/* OBSOLETE    eb_open knows that we don't have a file open when the program */
-/* OBSOLETE    starts.  */ */
-/* OBSOLETE int eb_desc = -1; */
-/* OBSOLETE  */
-/* OBSOLETE /* stream which is fdopen'd from eb_desc.  Only valid when */
-/* OBSOLETE    eb_desc != -1.  */ */
-/* OBSOLETE FILE *eb_stream; */
-/* OBSOLETE  */
-/* OBSOLETE /* Read a character from the remote system, doing all the fancy */
-/* OBSOLETE    timeout stuff.  */ */
-/* OBSOLETE static int */
-/* OBSOLETE readchar (void) */
-/* OBSOLETE { */
-/* OBSOLETE   char buf; */
-/* OBSOLETE  */
-/* OBSOLETE   buf = '\0'; */
-/* OBSOLETE #ifdef HAVE_TERMIO */
-/* OBSOLETE   /* termio does the timeout for us.  */ */
-/* OBSOLETE   read (eb_desc, &buf, 1); */
-/* OBSOLETE #else */
-/* OBSOLETE   alarm (timeout); */
-/* OBSOLETE   if (read (eb_desc, &buf, 1) < 0) */
-/* OBSOLETE     { */
-/* OBSOLETE       if (errno == EINTR) */
-/* OBSOLETE 	error ("Timeout reading from remote system."); */
-/* OBSOLETE       else */
-/* OBSOLETE 	perror_with_name ("remote"); */
-/* OBSOLETE     } */
-/* OBSOLETE   alarm (0); */
-/* OBSOLETE #endif */
-/* OBSOLETE  */
-/* OBSOLETE   if (buf == '\0') */
-/* OBSOLETE     error ("Timeout reading from remote system."); */
-/* OBSOLETE #if defined (LOG_FILE) */
-/* OBSOLETE   putc (buf & 0x7f, log_file); */
-/* OBSOLETE #endif */
-/* OBSOLETE   return buf & 0x7f; */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Keep discarding input from the remote system, until STRING is found.  */
-/* OBSOLETE    Let the user break out immediately.  */ */
-/* OBSOLETE static void */
-/* OBSOLETE expect (char *string) */
-/* OBSOLETE { */
-/* OBSOLETE   char *p = string; */
-/* OBSOLETE  */
-/* OBSOLETE   immediate_quit++; */
-/* OBSOLETE   while (1) */
-/* OBSOLETE     { */
-/* OBSOLETE       if (readchar () == *p) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  p++; */
-/* OBSOLETE 	  if (*p == '\0') */
-/* OBSOLETE 	    { */
-/* OBSOLETE 	      immediate_quit--; */
-/* OBSOLETE 	      return; */
-/* OBSOLETE 	    } */
-/* OBSOLETE 	} */
-/* OBSOLETE       else */
-/* OBSOLETE 	p = string; */
-/* OBSOLETE     } */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Keep discarding input until we see the ebmon prompt. */
-/* OBSOLETE  */
-/* OBSOLETE    The convention for dealing with the prompt is that you */
-/* OBSOLETE    o give your command */
-/* OBSOLETE    o *then* wait for the prompt. */
-/* OBSOLETE  */
-/* OBSOLETE    Thus the last thing that a procedure does with the serial line */
-/* OBSOLETE    will be an expect_prompt().  Exception:  eb_resume does not */
-/* OBSOLETE    wait for the prompt, because the terminal is being handed over */
-/* OBSOLETE    to the inferior.  However, the next thing which happens after that */
-/* OBSOLETE    is a eb_wait which does wait for the prompt. */
-/* OBSOLETE    Note that this includes abnormal exit, e.g. error().  This is */
-/* OBSOLETE    necessary to prevent getting into states from which we can't */
-/* OBSOLETE    recover.  */ */
-/* OBSOLETE static void */
-/* OBSOLETE expect_prompt (void) */
-/* OBSOLETE { */
-/* OBSOLETE #if defined (LOG_FILE) */
-/* OBSOLETE   /* This is a convenient place to do this.  The idea is to do it often */
-/* OBSOLETE      enough that we never lose much data if we terminate abnormally.  */ */
-/* OBSOLETE   fflush (log_file); */
-/* OBSOLETE #endif */
-/* OBSOLETE   expect ("\n# "); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Get a hex digit from the remote system & return its value. */
-/* OBSOLETE    If ignore_space is nonzero, ignore spaces (not newline, tab, etc).  */ */
-/* OBSOLETE static int */
-/* OBSOLETE get_hex_digit (int ignore_space) */
-/* OBSOLETE { */
-/* OBSOLETE   int ch; */
-/* OBSOLETE   while (1) */
-/* OBSOLETE     { */
-/* OBSOLETE       ch = readchar (); */
-/* OBSOLETE       if (ch >= '0' && ch <= '9') */
-/* OBSOLETE 	return ch - '0'; */
-/* OBSOLETE       else if (ch >= 'A' && ch <= 'F') */
-/* OBSOLETE 	return ch - 'A' + 10; */
-/* OBSOLETE       else if (ch >= 'a' && ch <= 'f') */
-/* OBSOLETE 	return ch - 'a' + 10; */
-/* OBSOLETE       else if (ch == ' ' && ignore_space) */
-/* OBSOLETE 	; */
-/* OBSOLETE       else */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  expect_prompt (); */
-/* OBSOLETE 	  error ("Invalid hex digit from remote system."); */
-/* OBSOLETE 	} */
-/* OBSOLETE     } */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Get a byte from eb_desc and put it in *BYT.  Accept any number */
-/* OBSOLETE    leading spaces.  */ */
-/* OBSOLETE static void */
-/* OBSOLETE get_hex_byte (char *byt) */
-/* OBSOLETE { */
-/* OBSOLETE   int val; */
-/* OBSOLETE  */
-/* OBSOLETE   val = get_hex_digit (1) << 4; */
-/* OBSOLETE   val |= get_hex_digit (0); */
-/* OBSOLETE   *byt = val; */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Get N 32-bit words from remote, each preceded by a space, */
-/* OBSOLETE    and put them in registers starting at REGNO.  */ */
-/* OBSOLETE static void */
-/* OBSOLETE get_hex_regs (int n, int regno) */
-/* OBSOLETE { */
-/* OBSOLETE   long val; */
-/* OBSOLETE   int i; */
-/* OBSOLETE  */
-/* OBSOLETE   for (i = 0; i < n; i++) */
-/* OBSOLETE     { */
-/* OBSOLETE       int j; */
-/* OBSOLETE  */
-/* OBSOLETE       val = 0; */
-/* OBSOLETE       for (j = 0; j < 8; j++) */
-/* OBSOLETE 	val = (val << 4) + get_hex_digit (j == 0); */
-/* OBSOLETE       supply_register (regno++, (char *) &val); */
-/* OBSOLETE     } */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Called when SIGALRM signal sent due to alarm() timeout.  */ */
-/* OBSOLETE #ifndef HAVE_TERMIO */
-/* OBSOLETE  */
-/* OBSOLETE volatile int n_alarms; */
-/* OBSOLETE  */
-/* OBSOLETE void */
-/* OBSOLETE eb_timer (void) */
-/* OBSOLETE { */
-/* OBSOLETE #if 0 */
-/* OBSOLETE   if (kiodebug) */
-/* OBSOLETE     printf ("eb_timer called\n"); */
-/* OBSOLETE #endif */
-/* OBSOLETE   n_alarms++; */
-/* OBSOLETE } */
-/* OBSOLETE #endif */
-/* OBSOLETE  */
-/* OBSOLETE /* malloc'd name of the program on the remote system.  */ */
-/* OBSOLETE static char *prog_name = NULL; */
-/* OBSOLETE  */
-/* OBSOLETE /* Nonzero if we have loaded the file ("yc") and not yet issued a "gi" */
-/* OBSOLETE    command.  "gi" is supposed to happen exactly once for each "yc".  */ */
-/* OBSOLETE static int need_gi = 0; */
-/* OBSOLETE  */
-/* OBSOLETE /* Number of SIGTRAPs we need to simulate.  That is, the next */
-/* OBSOLETE    NEED_ARTIFICIAL_TRAP calls to eb_wait should just return */
-/* OBSOLETE    SIGTRAP without actually waiting for anything.  */ */
-/* OBSOLETE  */
-/* OBSOLETE static int need_artificial_trap = 0; */
-/* OBSOLETE  */
-/* OBSOLETE /* This is called not only when we first attach, but also when the */
-/* OBSOLETE    user types "run" after having attached.  */ */
-/* OBSOLETE static void */
-/* OBSOLETE eb_create_inferior (char *execfile, char *args, char **env) */
-/* OBSOLETE { */
-/* OBSOLETE   int entry_pt; */
-/* OBSOLETE  */
-/* OBSOLETE   if (args && *args) */
-/* OBSOLETE     error ("Can't pass arguments to remote EBMON process"); */
-/* OBSOLETE  */
-/* OBSOLETE   if (execfile == 0 || exec_bfd == 0) */
-/* OBSOLETE     error ("No executable file specified"); */
-/* OBSOLETE  */
-/* OBSOLETE   entry_pt = (int) bfd_get_start_address (exec_bfd); */
-/* OBSOLETE  */
-/* OBSOLETE   { */
-/* OBSOLETE     /* OK, now read in the file.  Y=read, C=COFF, D=no symbols */
-/* OBSOLETE        0=start address, %s=filename.  */ */
-/* OBSOLETE  */
-/* OBSOLETE     fprintf (eb_stream, "YC D,0:%s", prog_name); */
-/* OBSOLETE  */
-/* OBSOLETE     if (args != NULL) */
-/* OBSOLETE       fprintf (eb_stream, " %s", args); */
-/* OBSOLETE  */
-/* OBSOLETE     fprintf (eb_stream, "\n"); */
-/* OBSOLETE     fflush (eb_stream); */
-/* OBSOLETE  */
-/* OBSOLETE     expect_prompt (); */
-/* OBSOLETE  */
-/* OBSOLETE     need_gi = 1; */
-/* OBSOLETE   } */
-/* OBSOLETE  */
-/* OBSOLETE /* The "process" (board) is already stopped awaiting our commands, and */
-/* OBSOLETE    the program is already downloaded.  We just set its PC and go.  */ */
-/* OBSOLETE  */
-/* OBSOLETE   clear_proceed_status (); */
-/* OBSOLETE  */
-/* OBSOLETE   /* Tell wait_for_inferior that we've started a new process.  */ */
-/* OBSOLETE   init_wait_for_inferior (); */
-/* OBSOLETE  */
-/* OBSOLETE   /* Set up the "saved terminal modes" of the inferior */
-/* OBSOLETE      based on what modes we are starting it with.  */ */
-/* OBSOLETE   target_terminal_init (); */
-/* OBSOLETE  */
-/* OBSOLETE   /* Install inferior's terminal modes.  */ */
-/* OBSOLETE   target_terminal_inferior (); */
-/* OBSOLETE  */
-/* OBSOLETE   /* insert_step_breakpoint ();  FIXME, do we need this?  */ */
-/* OBSOLETE   proceed ((CORE_ADDR) entry_pt, TARGET_SIGNAL_DEFAULT, 0);	/* Let 'er rip... */ */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Translate baud rates from integers to damn B_codes.  Unix should */
-/* OBSOLETE    have outgrown this crap years ago, but even POSIX wouldn't buck it.  */ */
-/* OBSOLETE  */
-/* OBSOLETE #ifndef B19200 */
-/* OBSOLETE #define B19200 EXTA */
-/* OBSOLETE #endif */
-/* OBSOLETE #ifndef B38400 */
-/* OBSOLETE #define B38400 EXTB */
-/* OBSOLETE #endif */
-/* OBSOLETE  */
-/* OBSOLETE struct */
-/* OBSOLETE { */
-/* OBSOLETE   int rate, damn_b; */
-/* OBSOLETE } */
-/* OBSOLETE baudtab[] = */
-/* OBSOLETE { */
-/* OBSOLETE   { */
-/* OBSOLETE     0, B0 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     50, B50 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     75, B75 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     110, B110 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     134, B134 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     150, B150 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     200, B200 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     300, B300 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     600, B600 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     1200, B1200 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     1800, B1800 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     2400, B2400 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     4800, B4800 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     9600, B9600 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     19200, B19200 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     38400, B38400 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     -1, -1 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE }; */
-/* OBSOLETE  */
-/* OBSOLETE int */
-/* OBSOLETE damn_b (int rate) */
-/* OBSOLETE { */
-/* OBSOLETE   int i; */
-/* OBSOLETE  */
-/* OBSOLETE   for (i = 0; baudtab[i].rate != -1; i++) */
-/* OBSOLETE     if (rate == baudtab[i].rate) */
-/* OBSOLETE       return baudtab[i].damn_b; */
-/* OBSOLETE   return B38400;		/* Random */ */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE  */
-/* OBSOLETE /* Open a connection to a remote debugger. */
-/* OBSOLETE    NAME is the filename used for communication, then a space, */
-/* OBSOLETE    then the name of the program as we should name it to EBMON.  */ */
-/* OBSOLETE  */
-/* OBSOLETE static int baudrate = 9600; */
-/* OBSOLETE static char *dev_name; */
-/* OBSOLETE void */
-/* OBSOLETE eb_open (char *name, int from_tty) */
-/* OBSOLETE { */
-/* OBSOLETE   TERMINAL sg; */
-/* OBSOLETE  */
-/* OBSOLETE   char *p; */
-/* OBSOLETE  */
-/* OBSOLETE   target_preopen (from_tty); */
-/* OBSOLETE  */
-/* OBSOLETE   /* Find the first whitespace character, it separates dev_name from */
-/* OBSOLETE      prog_name.  */ */
-/* OBSOLETE   if (name == 0) */
-/* OBSOLETE     goto erroid; */
-/* OBSOLETE  */
-/* OBSOLETE   for (p = name; */
-/* OBSOLETE        *p != '\0' && !isspace (*p); p++) */
-/* OBSOLETE     ; */
-/* OBSOLETE   if (*p == '\0') */
-/* OBSOLETE   erroid: */
-/* OBSOLETE     error ("\ */
-/* OBSOLETE Please include the name of the device for the serial port,\n\ */
-/* OBSOLETE the baud rate, and the name of the program to run on the remote system."); */
-/* OBSOLETE   dev_name = alloca (p - name + 1); */
-/* OBSOLETE   strncpy (dev_name, name, p - name); */
-/* OBSOLETE   dev_name[p - name] = '\0'; */
-/* OBSOLETE  */
-/* OBSOLETE   /* Skip over the whitespace after dev_name */ */
-/* OBSOLETE   for (; isspace (*p); p++) */
-/* OBSOLETE     /*EMPTY */ ; */
-/* OBSOLETE  */
-/* OBSOLETE   if (1 != sscanf (p, "%d ", &baudrate)) */
-/* OBSOLETE     goto erroid; */
-/* OBSOLETE  */
-/* OBSOLETE   /* Skip the number and then the spaces */ */
-/* OBSOLETE   for (; isdigit (*p); p++) */
-/* OBSOLETE     /*EMPTY */ ; */
-/* OBSOLETE   for (; isspace (*p); p++) */
-/* OBSOLETE     /*EMPTY */ ; */
-/* OBSOLETE  */
-/* OBSOLETE   if (prog_name != NULL) */
-/* OBSOLETE     xfree (prog_name); */
-/* OBSOLETE   prog_name = savestring (p, strlen (p)); */
-/* OBSOLETE  */
-/* OBSOLETE   eb_close (0); */
-/* OBSOLETE  */
-/* OBSOLETE   eb_desc = open (dev_name, O_RDWR); */
-/* OBSOLETE   if (eb_desc < 0) */
-/* OBSOLETE     perror_with_name (dev_name); */
-/* OBSOLETE   ioctl (eb_desc, TIOCGETP, &sg); */
-/* OBSOLETE #ifdef HAVE_TERMIO */
-/* OBSOLETE   sg.c_cc[VMIN] = 0;		/* read with timeout.  */ */
-/* OBSOLETE   sg.c_cc[VTIME] = timeout * 10; */
-/* OBSOLETE   sg.c_lflag &= ~(ICANON | ECHO); */
-/* OBSOLETE   sg.c_cflag = (sg.c_cflag & ~CBAUD) | damn_b (baudrate); */
-/* OBSOLETE #else */
-/* OBSOLETE   sg.sg_ispeed = damn_b (baudrate); */
-/* OBSOLETE   sg.sg_ospeed = damn_b (baudrate); */
-/* OBSOLETE   sg.sg_flags |= RAW | ANYP; */
-/* OBSOLETE   sg.sg_flags &= ~ECHO; */
-/* OBSOLETE #endif */
-/* OBSOLETE  */
-/* OBSOLETE   ioctl (eb_desc, TIOCSETP, &sg); */
-/* OBSOLETE   eb_stream = fdopen (eb_desc, "r+"); */
-/* OBSOLETE  */
-/* OBSOLETE   push_target (&eb_ops); */
-/* OBSOLETE   if (from_tty) */
-/* OBSOLETE     printf ("Remote %s debugging %s using %s\n", target_shortname, */
-/* OBSOLETE 	    prog_name, dev_name); */
-/* OBSOLETE  */
-/* OBSOLETE #ifndef HAVE_TERMIO */
-/* OBSOLETE #ifndef NO_SIGINTERRUPT */
-/* OBSOLETE   /* Cause SIGALRM's to make reads fail with EINTR instead of resuming */
-/* OBSOLETE      the read.  */ */
-/* OBSOLETE   if (siginterrupt (SIGALRM, 1) != 0) */
-/* OBSOLETE     perror ("eb_open: error in siginterrupt"); */
-/* OBSOLETE #endif */
-/* OBSOLETE  */
-/* OBSOLETE   /* Set up read timeout timer.  */ */
-/* OBSOLETE   if ((void (*)) signal (SIGALRM, eb_timer) == (void (*)) -1) */
-/* OBSOLETE     perror ("eb_open: error in signal"); */
-/* OBSOLETE #endif */
-/* OBSOLETE  */
-/* OBSOLETE #if defined (LOG_FILE) */
-/* OBSOLETE   log_file = fopen (LOG_FILE, "w"); */
-/* OBSOLETE   if (log_file == NULL) */
-/* OBSOLETE     perror_with_name (LOG_FILE); */
-/* OBSOLETE #endif */
-/* OBSOLETE  */
-/* OBSOLETE   /* Hello?  Are you there?  */ */
-/* OBSOLETE   write (eb_desc, "\n", 1); */
-/* OBSOLETE  */
-/* OBSOLETE   expect_prompt (); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Close out all files and local state before this target loses control. */ */
-/* OBSOLETE  */
-/* OBSOLETE static void */
-/* OBSOLETE eb_close (int quitting) */
-/* OBSOLETE { */
-/* OBSOLETE  */
-/* OBSOLETE   /* Due to a bug in Unix, fclose closes not only the stdio stream, */
-/* OBSOLETE      but also the file descriptor.  So we don't actually close */
-/* OBSOLETE      eb_desc.  */ */
-/* OBSOLETE   if (eb_stream) */
-/* OBSOLETE     fclose (eb_stream);		/* This also closes eb_desc */ */
-/* OBSOLETE   if (eb_desc >= 0) */
-/* OBSOLETE     /* close (eb_desc); */ */
-/* OBSOLETE  */
-/* OBSOLETE     /* Do not try to close eb_desc again, later in the program.  */ */
-/* OBSOLETE     eb_stream = NULL; */
-/* OBSOLETE   eb_desc = -1; */
-/* OBSOLETE  */
-/* OBSOLETE #if defined (LOG_FILE) */
-/* OBSOLETE   if (log_file) */
-/* OBSOLETE     { */
-/* OBSOLETE       if (ferror (log_file)) */
-/* OBSOLETE 	printf ("Error writing log file.\n"); */
-/* OBSOLETE       if (fclose (log_file) != 0) */
-/* OBSOLETE 	printf ("Error closing log file.\n"); */
-/* OBSOLETE     } */
-/* OBSOLETE #endif */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Terminate the open connection to the remote debugger. */
-/* OBSOLETE    Use this when you want to detach and do something else */
-/* OBSOLETE    with your gdb.  */ */
-/* OBSOLETE void */
-/* OBSOLETE eb_detach (int from_tty) */
-/* OBSOLETE { */
-/* OBSOLETE   pop_target ();		/* calls eb_close to do the real work */ */
-/* OBSOLETE   if (from_tty) */
-/* OBSOLETE     printf ("Ending remote %s debugging\n", target_shortname); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Tell the remote machine to resume.  */ */
-/* OBSOLETE  */
-/* OBSOLETE void */
-/* OBSOLETE eb_resume (ptid_t ptid, int step, enum target_signal sig) */
-/* OBSOLETE { */
-/* OBSOLETE   if (step) */
-/* OBSOLETE     { */
-/* OBSOLETE       write (eb_desc, "t 1,s\n", 6); */
-/* OBSOLETE       /* Wait for the echo.  */ */
-/* OBSOLETE       expect ("t 1,s\r"); */
-/* OBSOLETE       /* Then comes a line containing the instruction we stepped to.  */ */
-/* OBSOLETE       expect ("\n@"); */
-/* OBSOLETE       /* Then we get the prompt.  */ */
-/* OBSOLETE       expect_prompt (); */
-/* OBSOLETE  */
-/* OBSOLETE       /* Force the next eb_wait to return a trap.  Not doing anything */
-/* OBSOLETE          about I/O from the target means that the user has to type */
-/* OBSOLETE          "continue" to see any.  This should be fixed.  */ */
-/* OBSOLETE       need_artificial_trap = 1; */
-/* OBSOLETE     } */
-/* OBSOLETE   else */
-/* OBSOLETE     { */
-/* OBSOLETE       if (need_gi) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  need_gi = 0; */
-/* OBSOLETE 	  write (eb_desc, "gi\n", 3); */
-/* OBSOLETE  */
-/* OBSOLETE 	  /* Swallow the echo of "gi".  */ */
-/* OBSOLETE 	  expect ("gi\r"); */
-/* OBSOLETE 	} */
-/* OBSOLETE       else */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  write (eb_desc, "GR\n", 3); */
-/* OBSOLETE 	  /* Swallow the echo.  */ */
-/* OBSOLETE 	  expect ("GR\r"); */
-/* OBSOLETE 	} */
-/* OBSOLETE     } */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Wait until the remote machine stops, then return, */
-/* OBSOLETE    storing status in STATUS just as `wait' would.  */ */
-/* OBSOLETE  */
-/* OBSOLETE ptid_t */
-/* OBSOLETE eb_wait (ptid_t ptid, struct target_waitstatus *status) */
-/* OBSOLETE { */
-/* OBSOLETE   /* Strings to look for.  '?' means match any single character.   */
-/* OBSOLETE      Note that with the algorithm we use, the initial character */
-/* OBSOLETE      of the string cannot recur in the string, or we will not */
-/* OBSOLETE      find some cases of the string in the input.  */ */
-/* OBSOLETE  */
-/* OBSOLETE   static char bpt[] = "Invalid interrupt taken - #0x50 - "; */
-/* OBSOLETE   /* It would be tempting to look for "\n[__exit + 0x8]\n" */
-/* OBSOLETE      but that requires loading symbols with "yc i" and even if */
-/* OBSOLETE      we did do that we don't know that the file has symbols.  */ */
-/* OBSOLETE   static char exitmsg[] = "\n@????????I    JMPTI     GR121,LR0"; */
-/* OBSOLETE   char *bp = bpt; */
-/* OBSOLETE   char *ep = exitmsg; */
-/* OBSOLETE  */
-/* OBSOLETE   /* Large enough for either sizeof (bpt) or sizeof (exitmsg) chars.  */ */
-/* OBSOLETE   char swallowed[50]; */
-/* OBSOLETE   /* Current position in swallowed.  */ */
-/* OBSOLETE   char *swallowed_p = swallowed; */
-/* OBSOLETE  */
-/* OBSOLETE   int ch; */
-/* OBSOLETE   int ch_handled; */
-/* OBSOLETE  */
-/* OBSOLETE   int old_timeout = timeout; */
-/* OBSOLETE  */
-/* OBSOLETE   status->kind = TARGET_WAITKIND_EXITED; */
-/* OBSOLETE   status->value.integer = 0; */
-/* OBSOLETE  */
-/* OBSOLETE   if (need_artificial_trap != 0) */
-/* OBSOLETE     { */
-/* OBSOLETE       status->kind = TARGET_WAITKIND_STOPPED; */
-/* OBSOLETE       status->value.sig = TARGET_SIGNAL_TRAP; */
-/* OBSOLETE       need_artificial_trap--; */
-/* OBSOLETE       return 0; */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   timeout = 0;			/* Don't time out -- user program is running. */ */
-/* OBSOLETE   while (1) */
-/* OBSOLETE     { */
-/* OBSOLETE       ch_handled = 0; */
-/* OBSOLETE       ch = readchar (); */
-/* OBSOLETE       if (ch == *bp) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  bp++; */
-/* OBSOLETE 	  if (*bp == '\0') */
-/* OBSOLETE 	    break; */
-/* OBSOLETE 	  ch_handled = 1; */
-/* OBSOLETE  */
-/* OBSOLETE 	  *swallowed_p++ = ch; */
-/* OBSOLETE 	} */
-/* OBSOLETE       else */
-/* OBSOLETE 	bp = bpt; */
-/* OBSOLETE  */
-/* OBSOLETE       if (ch == *ep || *ep == '?') */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  ep++; */
-/* OBSOLETE 	  if (*ep == '\0') */
-/* OBSOLETE 	    break; */
-/* OBSOLETE  */
-/* OBSOLETE 	  if (!ch_handled) */
-/* OBSOLETE 	    *swallowed_p++ = ch; */
-/* OBSOLETE 	  ch_handled = 1; */
-/* OBSOLETE 	} */
-/* OBSOLETE       else */
-/* OBSOLETE 	ep = exitmsg; */
-/* OBSOLETE  */
-/* OBSOLETE       if (!ch_handled) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  char *p; */
-/* OBSOLETE  */
-/* OBSOLETE 	  /* Print out any characters which have been swallowed.  */ */
-/* OBSOLETE 	  for (p = swallowed; p < swallowed_p; ++p) */
-/* OBSOLETE 	    putc (*p, stdout); */
-/* OBSOLETE 	  swallowed_p = swallowed; */
-/* OBSOLETE  */
-/* OBSOLETE 	  putc (ch, stdout); */
-/* OBSOLETE 	} */
-/* OBSOLETE     } */
-/* OBSOLETE   expect_prompt (); */
-/* OBSOLETE   if (*bp == '\0') */
-/* OBSOLETE     { */
-/* OBSOLETE       status->kind = TARGET_WAITKIND_STOPPED; */
-/* OBSOLETE       status->value.sig = TARGET_SIGNAL_TRAP; */
-/* OBSOLETE     } */
-/* OBSOLETE   else */
-/* OBSOLETE     { */
-/* OBSOLETE       status->kind = TARGET_WAITKIND_EXITED; */
-/* OBSOLETE       status->value.integer = 0; */
-/* OBSOLETE     } */
-/* OBSOLETE   timeout = old_timeout; */
-/* OBSOLETE  */
-/* OBSOLETE   return 0; */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Return the name of register number REGNO */
-/* OBSOLETE    in the form input and output by EBMON. */
-/* OBSOLETE  */
-/* OBSOLETE    Returns a pointer to a static buffer containing the answer.  */ */
-/* OBSOLETE static char * */
-/* OBSOLETE get_reg_name (int regno) */
-/* OBSOLETE { */
-/* OBSOLETE   static char buf[80]; */
-/* OBSOLETE   if (regno >= GR96_REGNUM && regno < GR96_REGNUM + 32) */
-/* OBSOLETE     sprintf (buf, "GR%03d", regno - GR96_REGNUM + 96); */
-/* OBSOLETE   else if (regno >= LR0_REGNUM && regno < LR0_REGNUM + 128) */
-/* OBSOLETE     sprintf (buf, "LR%03d", regno - LR0_REGNUM); */
-/* OBSOLETE   else if (regno == Q_REGNUM) */
-/* OBSOLETE     strcpy (buf, "SR131"); */
-/* OBSOLETE   else if (regno >= BP_REGNUM && regno <= CR_REGNUM) */
-/* OBSOLETE     sprintf (buf, "SR%03d", regno - BP_REGNUM + 133); */
-/* OBSOLETE   else if (regno == ALU_REGNUM) */
-/* OBSOLETE     strcpy (buf, "SR132"); */
-/* OBSOLETE   else if (regno >= IPC_REGNUM && regno <= IPB_REGNUM) */
-/* OBSOLETE     sprintf (buf, "SR%03d", regno - IPC_REGNUM + 128); */
-/* OBSOLETE   else if (regno >= VAB_REGNUM && regno <= LRU_REGNUM) */
-/* OBSOLETE     sprintf (buf, "SR%03d", regno - VAB_REGNUM); */
-/* OBSOLETE   else if (regno == GR1_REGNUM) */
-/* OBSOLETE     strcpy (buf, "GR001"); */
-/* OBSOLETE   return buf; */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Read the remote registers into the block REGS.  */ */
-/* OBSOLETE  */
-/* OBSOLETE static void */
-/* OBSOLETE eb_fetch_registers (void) */
-/* OBSOLETE { */
-/* OBSOLETE   int reg_index; */
-/* OBSOLETE   int regnum_index; */
-/* OBSOLETE   char tempbuf[10]; */
-/* OBSOLETE   int i; */
-/* OBSOLETE  */
-/* OBSOLETE #if 0 */
-/* OBSOLETE   /* This should not be necessary, because one is supposed to read the */
-/* OBSOLETE      registers only when the inferior is stopped (at least with */
-/* OBSOLETE      ptrace() and why not make it the same for remote?).  */ */
-/* OBSOLETE   /* ^A is the "normal character" used to make sure we are talking to EBMON */
-/* OBSOLETE      and not to the program being debugged.  */ */
-/* OBSOLETE   write (eb_desc, "\001\n"); */
-/* OBSOLETE   expect_prompt (); */
-/* OBSOLETE #endif */
-/* OBSOLETE  */
-/* OBSOLETE   write (eb_desc, "dw gr96,gr127\n", 14); */
-/* OBSOLETE   for (reg_index = 96, regnum_index = GR96_REGNUM; */
-/* OBSOLETE        reg_index < 128; */
-/* OBSOLETE        reg_index += 4, regnum_index += 4) */
-/* OBSOLETE     { */
-/* OBSOLETE       sprintf (tempbuf, "GR%03d ", reg_index); */
-/* OBSOLETE       expect (tempbuf); */
-/* OBSOLETE       get_hex_regs (4, regnum_index); */
-/* OBSOLETE       expect ("\n"); */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   for (i = 0; i < 128; i += 32) */
-/* OBSOLETE     { */
-/* OBSOLETE       /* The PC has a tendency to hang if we get these */
-/* OBSOLETE          all in one fell swoop ("dw lr0,lr127").  */ */
-/* OBSOLETE       sprintf (tempbuf, "dw lr%d\n", i); */
-/* OBSOLETE       write (eb_desc, tempbuf, strlen (tempbuf)); */
-/* OBSOLETE       for (reg_index = i, regnum_index = LR0_REGNUM + i; */
-/* OBSOLETE 	   reg_index < i + 32; */
-/* OBSOLETE 	   reg_index += 4, regnum_index += 4) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  sprintf (tempbuf, "LR%03d ", reg_index); */
-/* OBSOLETE 	  expect (tempbuf); */
-/* OBSOLETE 	  get_hex_regs (4, regnum_index); */
-/* OBSOLETE 	  expect ("\n"); */
-/* OBSOLETE 	} */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   write (eb_desc, "dw sr133,sr133\n", 15); */
-/* OBSOLETE   expect ("SR133          "); */
-/* OBSOLETE   get_hex_regs (1, BP_REGNUM); */
-/* OBSOLETE   expect ("\n"); */
-/* OBSOLETE  */
-/* OBSOLETE   write (eb_desc, "dw sr134,sr134\n", 15); */
-/* OBSOLETE   expect ("SR134                   "); */
-/* OBSOLETE   get_hex_regs (1, FC_REGNUM); */
-/* OBSOLETE   expect ("\n"); */
-/* OBSOLETE  */
-/* OBSOLETE   write (eb_desc, "dw sr135,sr135\n", 15); */
-/* OBSOLETE   expect ("SR135                            "); */
-/* OBSOLETE   get_hex_regs (1, CR_REGNUM); */
-/* OBSOLETE   expect ("\n"); */
-/* OBSOLETE  */
-/* OBSOLETE   write (eb_desc, "dw sr131,sr131\n", 15); */
-/* OBSOLETE   expect ("SR131                            "); */
-/* OBSOLETE   get_hex_regs (1, Q_REGNUM); */
-/* OBSOLETE   expect ("\n"); */
-/* OBSOLETE  */
-/* OBSOLETE   write (eb_desc, "dw sr0,sr14\n", 12); */
-/* OBSOLETE   for (reg_index = 0, regnum_index = VAB_REGNUM; */
-/* OBSOLETE        regnum_index <= LRU_REGNUM; */
-/* OBSOLETE        regnum_index += 4, reg_index += 4) */
-/* OBSOLETE     { */
-/* OBSOLETE       sprintf (tempbuf, "SR%03d ", reg_index); */
-/* OBSOLETE       expect (tempbuf); */
-/* OBSOLETE       get_hex_regs (reg_index == 12 ? 3 : 4, regnum_index); */
-/* OBSOLETE       expect ("\n"); */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   /* There doesn't seem to be any way to get these.  */ */
-/* OBSOLETE   { */
-/* OBSOLETE     int val = -1; */
-/* OBSOLETE     supply_register (FPE_REGNUM, (char *) &val); */
-/* OBSOLETE     supply_register (INTE_REGNUM, (char *) &val); */
-/* OBSOLETE     supply_register (FPS_REGNUM, (char *) &val); */
-/* OBSOLETE     supply_register (EXO_REGNUM, (char *) &val); */
-/* OBSOLETE   } */
-/* OBSOLETE  */
-/* OBSOLETE   write (eb_desc, "dw gr1,gr1\n", 11); */
-/* OBSOLETE   expect ("GR001 "); */
-/* OBSOLETE   get_hex_regs (1, GR1_REGNUM); */
-/* OBSOLETE   expect_prompt (); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Fetch register REGNO, or all registers if REGNO is -1. */
-/* OBSOLETE    Returns errno value.  */ */
-/* OBSOLETE void */
-/* OBSOLETE eb_fetch_register (int regno) */
-/* OBSOLETE { */
-/* OBSOLETE   if (regno == -1) */
-/* OBSOLETE     eb_fetch_registers (); */
-/* OBSOLETE   else */
-/* OBSOLETE     { */
-/* OBSOLETE       char *name = get_reg_name (regno); */
-/* OBSOLETE       fprintf (eb_stream, "dw %s,%s\n", name, name); */
-/* OBSOLETE       expect (name); */
-/* OBSOLETE       expect (" "); */
-/* OBSOLETE       get_hex_regs (1, regno); */
-/* OBSOLETE       expect_prompt (); */
-/* OBSOLETE     } */
-/* OBSOLETE   return; */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Store the remote registers from the contents of the block REGS.  */ */
-/* OBSOLETE  */
-/* OBSOLETE static void */
-/* OBSOLETE eb_store_registers (void) */
-/* OBSOLETE { */
-/* OBSOLETE   int i, j; */
-/* OBSOLETE   fprintf (eb_stream, "s gr1,%x\n", read_register (GR1_REGNUM)); */
-/* OBSOLETE   expect_prompt (); */
-/* OBSOLETE  */
-/* OBSOLETE   for (j = 0; j < 32; j += 16) */
-/* OBSOLETE     { */
-/* OBSOLETE       fprintf (eb_stream, "s gr%d,", j + 96); */
-/* OBSOLETE       for (i = 0; i < 15; ++i) */
-/* OBSOLETE 	fprintf (eb_stream, "%x,", read_register (GR96_REGNUM + j + i)); */
-/* OBSOLETE       fprintf (eb_stream, "%x\n", read_register (GR96_REGNUM + j + 15)); */
-/* OBSOLETE       expect_prompt (); */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   for (j = 0; j < 128; j += 16) */
-/* OBSOLETE     { */
-/* OBSOLETE       fprintf (eb_stream, "s lr%d,", j); */
-/* OBSOLETE       for (i = 0; i < 15; ++i) */
-/* OBSOLETE 	fprintf (eb_stream, "%x,", read_register (LR0_REGNUM + j + i)); */
-/* OBSOLETE       fprintf (eb_stream, "%x\n", read_register (LR0_REGNUM + j + 15)); */
-/* OBSOLETE       expect_prompt (); */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   fprintf (eb_stream, "s sr133,%x,%x,%x\n", read_register (BP_REGNUM), */
-/* OBSOLETE 	   read_register (FC_REGNUM), read_register (CR_REGNUM)); */
-/* OBSOLETE   expect_prompt (); */
-/* OBSOLETE   fprintf (eb_stream, "s sr131,%x\n", read_register (Q_REGNUM)); */
-/* OBSOLETE   expect_prompt (); */
-/* OBSOLETE   fprintf (eb_stream, "s sr0,"); */
-/* OBSOLETE   for (i = 0; i < 11; ++i) */
-/* OBSOLETE     fprintf (eb_stream, "%x,", read_register (VAB_REGNUM + i)); */
-/* OBSOLETE   fprintf (eb_stream, "%x\n", read_register (VAB_REGNUM + 11)); */
-/* OBSOLETE   expect_prompt (); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Store register REGNO, or all if REGNO == 0. */
-/* OBSOLETE    Return errno value.  */ */
-/* OBSOLETE void */
-/* OBSOLETE eb_store_register (int regno) */
-/* OBSOLETE { */
-/* OBSOLETE   if (regno == -1) */
-/* OBSOLETE     eb_store_registers (); */
-/* OBSOLETE   else */
-/* OBSOLETE     { */
-/* OBSOLETE       char *name = get_reg_name (regno); */
-/* OBSOLETE       fprintf (eb_stream, "s %s,%x\n", name, read_register (regno)); */
-/* OBSOLETE       /* Setting GR1 changes the numbers of all the locals, so */
-/* OBSOLETE          invalidate the register cache.  Do this *after* calling */
-/* OBSOLETE          read_register, because we want read_register to return the */
-/* OBSOLETE          value that write_register has just stuffed into the registers */
-/* OBSOLETE          array, not the value of the register fetched from the */
-/* OBSOLETE          inferior.  */ */
-/* OBSOLETE       if (regno == GR1_REGNUM) */
-/* OBSOLETE 	registers_changed (); */
-/* OBSOLETE       expect_prompt (); */
-/* OBSOLETE     } */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Get ready to modify the registers array.  On machines which store */
-/* OBSOLETE    individual registers, this doesn't need to do anything.  On machines */
-/* OBSOLETE    which store all the registers in one fell swoop, this makes sure */
-/* OBSOLETE    that registers contains all the registers from the program being */
-/* OBSOLETE    debugged.  */ */
-/* OBSOLETE  */
-/* OBSOLETE void */
-/* OBSOLETE eb_prepare_to_store (void) */
-/* OBSOLETE { */
-/* OBSOLETE   /* Do nothing, since we can store individual regs */ */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Transfer LEN bytes between GDB address MYADDR and target address */
-/* OBSOLETE    MEMADDR.  If WRITE is non-zero, transfer them to the target, */
-/* OBSOLETE    otherwise transfer them from the target.  TARGET is unused. */
-/* OBSOLETE  */
-/* OBSOLETE    Returns the number of bytes transferred. */ */
-/* OBSOLETE  */
-/* OBSOLETE int */
-/* OBSOLETE eb_xfer_inferior_memory (CORE_ADDR memaddr, char *myaddr, int len, int write, */
-/* OBSOLETE 			 struct mem_attrib *attrib ATTRIBUTE_UNUSED, */
-/* OBSOLETE 			 struct target_ops *target ATTRIBUTE_UNUSED) */
-/* OBSOLETE { */
-/* OBSOLETE   if (write) */
-/* OBSOLETE     return eb_write_inferior_memory (memaddr, myaddr, len); */
-/* OBSOLETE   else */
-/* OBSOLETE     return eb_read_inferior_memory (memaddr, myaddr, len); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE void */
-/* OBSOLETE eb_files_info (void) */
-/* OBSOLETE { */
-/* OBSOLETE   printf ("\tAttached to %s at %d baud and running program %s.\n", */
-/* OBSOLETE 	  dev_name, baudrate, prog_name); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Copy LEN bytes of data from debugger memory at MYADDR */
-/* OBSOLETE    to inferior's memory at MEMADDR.  Returns length moved.  */ */
-/* OBSOLETE int */
-/* OBSOLETE eb_write_inferior_memory (CORE_ADDR memaddr, char *myaddr, int len) */
-/* OBSOLETE { */
-/* OBSOLETE   int i; */
-/* OBSOLETE  */
-/* OBSOLETE   for (i = 0; i < len; i++) */
-/* OBSOLETE     { */
-/* OBSOLETE       if ((i % 16) == 0) */
-/* OBSOLETE 	fprintf (eb_stream, "sb %x,", memaddr + i); */
-/* OBSOLETE       if ((i % 16) == 15 || i == len - 1) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  fprintf (eb_stream, "%x\n", ((unsigned char *) myaddr)[i]); */
-/* OBSOLETE 	  expect_prompt (); */
-/* OBSOLETE 	} */
-/* OBSOLETE       else */
-/* OBSOLETE 	fprintf (eb_stream, "%x,", ((unsigned char *) myaddr)[i]); */
-/* OBSOLETE     } */
-/* OBSOLETE   return len; */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Read LEN bytes from inferior memory at MEMADDR.  Put the result */
-/* OBSOLETE    at debugger address MYADDR.  Returns length moved.  */ */
-/* OBSOLETE int */
-/* OBSOLETE eb_read_inferior_memory (CORE_ADDR memaddr, char *myaddr, int len) */
-/* OBSOLETE { */
-/* OBSOLETE   int i; */
-/* OBSOLETE  */
-/* OBSOLETE   /* Number of bytes read so far.  */ */
-/* OBSOLETE   int count; */
-/* OBSOLETE  */
-/* OBSOLETE   /* Starting address of this pass.  */ */
-/* OBSOLETE   unsigned long startaddr; */
-/* OBSOLETE  */
-/* OBSOLETE   /* Number of bytes to read in this pass.  */ */
-/* OBSOLETE   int len_this_pass; */
-/* OBSOLETE  */
-/* OBSOLETE   /* Note that this code works correctly if startaddr is just less */
-/* OBSOLETE      than UINT_MAX (well, really CORE_ADDR_MAX if there was such a */
-/* OBSOLETE      thing).  That is, something like */
-/* OBSOLETE      eb_read_bytes (CORE_ADDR_MAX - 4, foo, 4) */
-/* OBSOLETE      works--it never adds len to memaddr and gets 0.  */ */
-/* OBSOLETE   /* However, something like */
-/* OBSOLETE      eb_read_bytes (CORE_ADDR_MAX - 3, foo, 4) */
-/* OBSOLETE      doesn't need to work.  Detect it and give up if there's an attempt */
-/* OBSOLETE      to do that.  */ */
-/* OBSOLETE   if (((memaddr - 1) + len) < memaddr) */
-/* OBSOLETE     { */
-/* OBSOLETE       errno = EIO; */
-/* OBSOLETE       return 0; */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   startaddr = memaddr; */
-/* OBSOLETE   count = 0; */
-/* OBSOLETE   while (count < len) */
-/* OBSOLETE     { */
-/* OBSOLETE       len_this_pass = 16; */
-/* OBSOLETE       if ((startaddr % 16) != 0) */
-/* OBSOLETE 	len_this_pass -= startaddr % 16; */
-/* OBSOLETE       if (len_this_pass > (len - count)) */
-/* OBSOLETE 	len_this_pass = (len - count); */
-/* OBSOLETE  */
-/* OBSOLETE       fprintf (eb_stream, "db %x,%x\n", startaddr, */
-/* OBSOLETE 	       (startaddr - 1) + len_this_pass); */
-/* OBSOLETE       expect ("\n"); */
-/* OBSOLETE  */
-/* OBSOLETE       /* Look for 8 hex digits.  */ */
-/* OBSOLETE       i = 0; */
-/* OBSOLETE       while (1) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  if (isxdigit (readchar ())) */
-/* OBSOLETE 	    ++i; */
-/* OBSOLETE 	  else */
-/* OBSOLETE 	    { */
-/* OBSOLETE 	      expect_prompt (); */
-/* OBSOLETE 	      error ("Hex digit expected from remote system."); */
-/* OBSOLETE 	    } */
-/* OBSOLETE 	  if (i >= 8) */
-/* OBSOLETE 	    break; */
-/* OBSOLETE 	} */
-/* OBSOLETE  */
-/* OBSOLETE       expect ("  "); */
-/* OBSOLETE  */
-/* OBSOLETE       for (i = 0; i < len_this_pass; i++) */
-/* OBSOLETE 	get_hex_byte (&myaddr[count++]); */
-/* OBSOLETE  */
-/* OBSOLETE       expect_prompt (); */
-/* OBSOLETE  */
-/* OBSOLETE       startaddr += len_this_pass; */
-/* OBSOLETE     } */
-/* OBSOLETE   return len; */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE static void */
-/* OBSOLETE eb_kill (char *args, int from_tty) */
-/* OBSOLETE { */
-/* OBSOLETE   return;			/* Ignore attempts to kill target system */ */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Clean up when a program exits. */
-/* OBSOLETE  */
-/* OBSOLETE    The program actually lives on in the remote processor's RAM, and may be */
-/* OBSOLETE    run again without a download.  Don't leave it full of breakpoint */
-/* OBSOLETE    instructions.  */ */
-/* OBSOLETE  */
-/* OBSOLETE void */
-/* OBSOLETE eb_mourn_inferior (void) */
-/* OBSOLETE { */
-/* OBSOLETE   remove_breakpoints (); */
-/* OBSOLETE   unpush_target (&eb_ops); */
-/* OBSOLETE   generic_mourn_inferior ();	/* Do all the proper things now */ */
-/* OBSOLETE } */
-/* OBSOLETE /* Define the target subroutine names */ */
-/* OBSOLETE  */
-/* OBSOLETE struct target_ops eb_ops; */
-/* OBSOLETE  */
-/* OBSOLETE static void */
-/* OBSOLETE init_eb_ops (void) */
-/* OBSOLETE { */
-/* OBSOLETE   eb_ops.to_shortname = "amd-eb"; */
-/* OBSOLETE   eb_ops.to_longname = "Remote serial AMD EBMON target"; */
-/* OBSOLETE   eb_ops.to_doc = "Use a remote computer running EBMON connected by a serial line.\n\ */
-/* OBSOLETE Arguments are the name of the device for the serial line,\n\ */
-/* OBSOLETE the speed to connect at in bits per second, and the filename of the\n\ */
-/* OBSOLETE executable as it exists on the remote computer.  For example,\n\ */
-/* OBSOLETE target amd-eb /dev/ttya 9600 demo", */
-/* OBSOLETE     eb_ops.to_open = eb_open; */
-/* OBSOLETE   eb_ops.to_close = eb_close; */
-/* OBSOLETE   eb_ops.to_attach = 0; */
-/* OBSOLETE   eb_ops.to_post_attach = NULL; */
-/* OBSOLETE   eb_ops.to_require_attach = NULL; */
-/* OBSOLETE   eb_ops.to_detach = eb_detach; */
-/* OBSOLETE   eb_ops.to_require_detach = NULL; */
-/* OBSOLETE   eb_ops.to_resume = eb_resume; */
-/* OBSOLETE   eb_ops.to_wait = eb_wait; */
-/* OBSOLETE   eb_ops.to_post_wait = NULL; */
-/* OBSOLETE   eb_ops.to_fetch_registers = eb_fetch_register; */
-/* OBSOLETE   eb_ops.to_store_registers = eb_store_register; */
-/* OBSOLETE   eb_ops.to_prepare_to_store = eb_prepare_to_store; */
-/* OBSOLETE   eb_ops.to_xfer_memory = eb_xfer_inferior_memory; */
-/* OBSOLETE   eb_ops.to_files_info = eb_files_info; */
-/* OBSOLETE   eb_ops.to_insert_breakpoint = 0; */
-/* OBSOLETE   eb_ops.to_remove_breakpoint = 0;	/* Breakpoints */ */
-/* OBSOLETE   eb_ops.to_terminal_init = 0; */
-/* OBSOLETE   eb_ops.to_terminal_inferior = 0; */
-/* OBSOLETE   eb_ops.to_terminal_ours_for_output = 0; */
-/* OBSOLETE   eb_ops.to_terminal_ours = 0; */
-/* OBSOLETE   eb_ops.to_terminal_info = 0;	/* Terminal handling */ */
-/* OBSOLETE   eb_ops.to_kill = eb_kill; */
-/* OBSOLETE   eb_ops.to_load = generic_load;	/* load */ */
-/* OBSOLETE   eb_ops.to_lookup_symbol = 0;	/* lookup_symbol */ */
-/* OBSOLETE   eb_ops.to_create_inferior = eb_create_inferior; */
-/* OBSOLETE   eb_ops.to_post_startup_inferior = NULL; */
-/* OBSOLETE   eb_ops.to_acknowledge_created_inferior = NULL; */
-/* OBSOLETE   eb_ops.to_clone_and_follow_inferior = NULL; */
-/* OBSOLETE   eb_ops.to_post_follow_inferior_by_clone = NULL; */
-/* OBSOLETE   eb_ops.to_insert_fork_catchpoint = NULL; */
-/* OBSOLETE   eb_ops.to_remove_fork_catchpoint = NULL; */
-/* OBSOLETE   eb_ops.to_insert_vfork_catchpoint = NULL; */
-/* OBSOLETE   eb_ops.to_remove_vfork_catchpoint = NULL; */
-/* OBSOLETE   eb_ops.to_has_forked = NULL; */
-/* OBSOLETE   eb_ops.to_has_vforked = NULL; */
-/* OBSOLETE   eb_ops.to_can_follow_vfork_prior_to_exec = NULL; */
-/* OBSOLETE   eb_ops.to_post_follow_vfork = NULL; */
-/* OBSOLETE   eb_ops.to_insert_exec_catchpoint = NULL; */
-/* OBSOLETE   eb_ops.to_remove_exec_catchpoint = NULL; */
-/* OBSOLETE   eb_ops.to_has_execd = NULL; */
-/* OBSOLETE   eb_ops.to_reported_exec_events_per_exec_call = NULL; */
-/* OBSOLETE   eb_ops.to_has_exited = NULL; */
-/* OBSOLETE   eb_ops.to_mourn_inferior = eb_mourn_inferior; */
-/* OBSOLETE   eb_ops.to_can_run = 0;	/* can_run */ */
-/* OBSOLETE   eb_ops.to_notice_signals = 0;	/* notice_signals */ */
-/* OBSOLETE   eb_ops.to_thread_alive = 0;	/* thread-alive */ */
-/* OBSOLETE   eb_ops.to_stop = 0;		/* to_stop */ */
-/* OBSOLETE   eb_ops.to_pid_to_exec_file = NULL; */
-/* OBSOLETE   eb_ops.to_stratum = process_stratum; */
-/* OBSOLETE   eb_ops.DONT_USE = 0;		/* next */ */
-/* OBSOLETE   eb_ops.to_has_all_memory = 1; */
-/* OBSOLETE   eb_ops.to_has_memory = 1; */
-/* OBSOLETE   eb_ops.to_has_stack = 1; */
-/* OBSOLETE   eb_ops.to_has_registers = 1; */
-/* OBSOLETE   eb_ops.to_has_execution = 1;	/* all mem, mem, stack, regs, exec */ */
-/* OBSOLETE   eb_ops.to_sections = 0;	/* sections */ */
-/* OBSOLETE   eb_ops.to_sections_end = 0;	/* sections end */ */
-/* OBSOLETE   eb_ops.to_magic = OPS_MAGIC;	/* Always the last thing */ */
-/* OBSOLETE }; */
-/* OBSOLETE  */
-/* OBSOLETE void */
-/* OBSOLETE _initialize_remote_eb (void) */
-/* OBSOLETE { */
-/* OBSOLETE   init_eb_ops (); */
-/* OBSOLETE   add_target (&eb_ops); */
-/* OBSOLETE } */
diff --git a/gdb/remote-mm.c b/gdb/remote-mm.c
deleted file mode 100644
index 1cd630e..0000000
--- a/gdb/remote-mm.c
+++ /dev/null
@@ -1,1848 +0,0 @@
-/* OBSOLETE /* Remote debugging interface for Am290*0 running MiniMON monitor, for GDB. */
-/* OBSOLETE    Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, */
-/* OBSOLETE    2001 Free Software Foundation, Inc. */
-/* OBSOLETE    Originally written by Daniel Mann at AMD. */
-/* OBSOLETE  */
-/* OBSOLETE    This file is part of GDB. */
-/* OBSOLETE  */
-/* OBSOLETE    This program is free software; you can redistribute it and/or modify */
-/* OBSOLETE    it under the terms of the GNU General Public License as published by */
-/* OBSOLETE    the Free Software Foundation; either version 2 of the License, or */
-/* OBSOLETE    (at your option) any later version. */
-/* OBSOLETE  */
-/* OBSOLETE    This program is distributed in the hope that it will be useful, */
-/* OBSOLETE    but WITHOUT ANY WARRANTY; without even the implied warranty of */
-/* OBSOLETE    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the */
-/* OBSOLETE    GNU General Public License for more details. */
-/* OBSOLETE  */
-/* OBSOLETE    You should have received a copy of the GNU General Public License */
-/* OBSOLETE    along with this program; if not, write to the Free Software */
-/* OBSOLETE    Foundation, Inc., 59 Temple Place - Suite 330, */
-/* OBSOLETE    Boston, MA 02111-1307, USA.  */ */
-/* OBSOLETE  */
-/* OBSOLETE /* This is like remote.c but ecpects MiniMON to be running on the Am29000  */
-/* OBSOLETE    target hardware. */
-/* OBSOLETE    - David Wood (wood@lab.ultra.nyu.edu) at New York University adapted this */
-/* OBSOLETE    file to gdb 3.95.  I was unable to get this working on sun3os4 */
-/* OBSOLETE    with termio, only with sgtty.  Because we are only attempting to */
-/* OBSOLETE    use this module to debug our kernel, which is already loaded when */
-/* OBSOLETE    gdb is started up, I did not code up the file downloading facilities.   */
-/* OBSOLETE    As a result this module has only the stubs to download files.  */
-/* OBSOLETE    You should get tagged at compile time if you need to make any  */
-/* OBSOLETE    changes/additions.  */ */
-/* OBSOLETE  */
-/* OBSOLETE #include "defs.h" */
-/* OBSOLETE #include "inferior.h" */
-/* OBSOLETE #include "value.h" */
-/* OBSOLETE #include <ctype.h> */
-/* OBSOLETE #include <fcntl.h> */
-/* OBSOLETE #include <signal.h> */
-/* OBSOLETE #include <errno.h> */
-/* OBSOLETE #include "gdb_string.h" */
-/* OBSOLETE #include "terminal.h" */
-/* OBSOLETE #include "minimon.h" */
-/* OBSOLETE #include "target.h" */
-/* OBSOLETE #include "regcache.h" */
-/* OBSOLETE  */
-/* OBSOLETE /* Offset of member MEMBER in a struct of type TYPE.  */ */
-/* OBSOLETE #define offsetof(TYPE, MEMBER) ((int) &((TYPE *)0)->MEMBER) */
-/* OBSOLETE  */
-/* OBSOLETE #define DRAIN_INPUT()	(msg_recv_serial((union msg_t*)0)) */
-/* OBSOLETE  */
-/* OBSOLETE extern int stop_soon_quietly;	/* for wait_for_inferior */ */
-/* OBSOLETE  */
-/* OBSOLETE static void mm_resume (ptid_t ptid, int step, enum target_signal sig) */
-/* OBSOLETE static void mm_fetch_registers (); */
-/* OBSOLETE static int fetch_register (); */
-/* OBSOLETE static void mm_store_registers (); */
-/* OBSOLETE static int store_register (); */
-/* OBSOLETE static int regnum_to_srnum (); */
-/* OBSOLETE static void mm_close (); */
-/* OBSOLETE static char *msg_str (); */
-/* OBSOLETE static char *error_msg_str (); */
-/* OBSOLETE static int expect_msg (); */
-/* OBSOLETE static void init_target_mm (); */
-/* OBSOLETE static int mm_memory_space (); */
-/* OBSOLETE  */
-/* OBSOLETE #define FREEZE_MODE     (read_register(CPS_REGNUM) && 0x400) */
-/* OBSOLETE #define USE_SHADOW_PC	((processor_type == a29k_freeze_mode) && FREEZE_MODE) */
-/* OBSOLETE  */
-/* OBSOLETE /* FIXME: Replace with `set remotedebug'.  */ */
-/* OBSOLETE #define LLOG_FILE "minimon.log" */
-/* OBSOLETE #if defined (LOG_FILE) */
-/* OBSOLETE FILE *log_file; */
-/* OBSOLETE #endif */
-/* OBSOLETE  */
-/* OBSOLETE /*   */
-/* OBSOLETE  * Size of message buffers.  I couldn't get memory reads to work when */
-/* OBSOLETE  * the byte_count was larger than 512 (it may be a baud rate problem). */
-/* OBSOLETE  */ */
-/* OBSOLETE #define BUFER_SIZE  512 */
-/* OBSOLETE /*  */
-/* OBSOLETE  * Size of data area in message buffer on the TARGET (remote system). */
-/* OBSOLETE  */ */
-/* OBSOLETE #define MAXDATA_T  (target_config.max_msg_size - \ */
-/* OBSOLETE 			offsetof(struct write_r_msg_t,data[0])) */
-/* OBSOLETE /*                */
-/* OBSOLETE  * Size of data area in message buffer on the HOST (gdb).  */
-/* OBSOLETE  */ */
-/* OBSOLETE #define MAXDATA_H  (BUFER_SIZE - offsetof(struct write_r_msg_t,data[0])) */
-/* OBSOLETE /*  */
-/* OBSOLETE  * Defined as the minimum size of data areas of the two message buffers  */
-/* OBSOLETE  */ */
-/* OBSOLETE #define MAXDATA	   (MAXDATA_H < MAXDATA_T ? MAXDATA_H : MAXDATA_T) */
-/* OBSOLETE  */
-/* OBSOLETE static char out_buf[BUFER_SIZE]; */
-/* OBSOLETE static char in_buf[BUFER_SIZE]; */
-/* OBSOLETE  */
-/* OBSOLETE int msg_recv_serial (); */
-/* OBSOLETE int msg_send_serial (); */
-/* OBSOLETE  */
-/* OBSOLETE #define MAX_RETRIES 5000 */
-/* OBSOLETE extern struct target_ops mm_ops;	/* Forward declaration */ */
-/* OBSOLETE struct config_msg_t target_config;	/* HIF needs this */ */
-/* OBSOLETE union msg_t *out_msg_buf = (union msg_t *) out_buf; */
-/* OBSOLETE union msg_t *in_msg_buf = (union msg_t *) in_buf; */
-/* OBSOLETE  */
-/* OBSOLETE static int timeout = 5; */
-/* OBSOLETE  */
-/* OBSOLETE /* Descriptor for I/O to remote machine.  Initialize it to -1 so that */
-/* OBSOLETE    mm_open knows that we don't have a file open when the program */
-/* OBSOLETE    starts.  */ */
-/* OBSOLETE int mm_desc = -1; */
-/* OBSOLETE  */
-/* OBSOLETE /* stream which is fdopen'd from mm_desc.  Only valid when */
-/* OBSOLETE    mm_desc != -1.  */ */
-/* OBSOLETE FILE *mm_stream; */
-/* OBSOLETE  */
-/* OBSOLETE /* Called when SIGALRM signal sent due to alarm() timeout.  */ */
-/* OBSOLETE #ifndef HAVE_TERMIO */
-/* OBSOLETE  */
-/* OBSOLETE volatile int n_alarms; */
-/* OBSOLETE  */
-/* OBSOLETE static void */
-/* OBSOLETE mm_timer (void) */
-/* OBSOLETE { */
-/* OBSOLETE #if 0 */
-/* OBSOLETE   if (kiodebug) */
-/* OBSOLETE     printf ("mm_timer called\n"); */
-/* OBSOLETE #endif */
-/* OBSOLETE   n_alarms++; */
-/* OBSOLETE } */
-/* OBSOLETE #endif	/* HAVE_TERMIO */ */
-/* OBSOLETE  */
-/* OBSOLETE /* malloc'd name of the program on the remote system.  */ */
-/* OBSOLETE static char *prog_name = NULL; */
-/* OBSOLETE  */
-/* OBSOLETE  */
-/* OBSOLETE /* Number of SIGTRAPs we need to simulate.  That is, the next */
-/* OBSOLETE    NEED_ARTIFICIAL_TRAP calls to mm_wait should just return */
-/* OBSOLETE    SIGTRAP without actually waiting for anything.  */ */
-/* OBSOLETE  */
-/* OBSOLETE /**************************************************** REMOTE_CREATE_INFERIOR */ */
-/* OBSOLETE /* This is called not only when we first attach, but also when the */
-/* OBSOLETE    user types "run" after having attached.  */ */
-/* OBSOLETE static void */
-/* OBSOLETE mm_create_inferior (char *execfile, char *args, char **env) */
-/* OBSOLETE { */
-/* OBSOLETE #define MAX_TOKENS 25 */
-/* OBSOLETE #define BUFFER_SIZE 256 */
-/* OBSOLETE   int token_count; */
-/* OBSOLETE   int result; */
-/* OBSOLETE   char *token[MAX_TOKENS]; */
-/* OBSOLETE   char cmd_line[BUFFER_SIZE]; */
-/* OBSOLETE  */
-/* OBSOLETE   if (args && *args) */
-/* OBSOLETE     error ("Can't pass arguments to remote mm process (yet)."); */
-/* OBSOLETE  */
-/* OBSOLETE   if (execfile == 0 /* || exec_bfd == 0 */ ) */
-/* OBSOLETE     error ("No executable file specified"); */
-/* OBSOLETE  */
-/* OBSOLETE   if (!mm_stream) */
-/* OBSOLETE     { */
-/* OBSOLETE       printf ("Minimon not open yet.\n"); */
-/* OBSOLETE       return; */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   /* On ultra3 (NYU) we assume the kernel is already running so there is */
-/* OBSOLETE      no file to download. */
-/* OBSOLETE      FIXME: Fixed required here -> load your program, possibly with mm_load(). */
-/* OBSOLETE    */ */
-/* OBSOLETE   printf_filtered ("\n\ */
-/* OBSOLETE Assuming you are at NYU debuging a kernel, i.e., no need to download.\n\n"); */
-/* OBSOLETE  */
-/* OBSOLETE   /* We will get a task spawn event immediately.  */ */
-/* OBSOLETE   init_wait_for_inferior (); */
-/* OBSOLETE   clear_proceed_status (); */
-/* OBSOLETE   stop_soon_quietly = 1; */
-/* OBSOLETE   proceed (-1, TARGET_SIGNAL_DEFAULT, 0); */
-/* OBSOLETE   normal_stop (); */
-/* OBSOLETE } */
-/* OBSOLETE /**************************************************** REMOTE_MOURN_INFERIOR */ */
-/* OBSOLETE static void */
-/* OBSOLETE mm_mourn (void) */
-/* OBSOLETE { */
-/* OBSOLETE   pop_target ();		/* Pop back to no-child state */ */
-/* OBSOLETE   generic_mourn_inferior (); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /********************************************************************** damn_b */
-/* OBSOLETE */ */
-/* OBSOLETE /* Translate baud rates from integers to damn B_codes.  Unix should */
-/* OBSOLETE    have outgrown this crap years ago, but even POSIX wouldn't buck it.  */ */
-/* OBSOLETE  */
-/* OBSOLETE #ifndef B19200 */
-/* OBSOLETE #define B19200 EXTA */
-/* OBSOLETE #endif */
-/* OBSOLETE #ifndef B38400 */
-/* OBSOLETE #define B38400 EXTB */
-/* OBSOLETE #endif */
-/* OBSOLETE  */
-/* OBSOLETE static struct */
-/* OBSOLETE { */
-/* OBSOLETE   int rate, damn_b; */
-/* OBSOLETE } */
-/* OBSOLETE baudtab[] = */
-/* OBSOLETE { */
-/* OBSOLETE   { */
-/* OBSOLETE     0, B0 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     50, B50 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     75, B75 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     110, B110 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     134, B134 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     150, B150 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     200, B200 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     300, B300 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     600, B600 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     1200, B1200 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     1800, B1800 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     2400, B2400 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     4800, B4800 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     9600, B9600 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     19200, B19200 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     38400, B38400 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE   { */
-/* OBSOLETE     -1, -1 */
-/* OBSOLETE   } */
-/* OBSOLETE   , */
-/* OBSOLETE }; */
-/* OBSOLETE  */
-/* OBSOLETE static int */
-/* OBSOLETE damn_b (int rate) */
-/* OBSOLETE { */
-/* OBSOLETE   int i; */
-/* OBSOLETE  */
-/* OBSOLETE   for (i = 0; baudtab[i].rate != -1; i++) */
-/* OBSOLETE     if (rate == baudtab[i].rate) */
-/* OBSOLETE       return baudtab[i].damn_b; */
-/* OBSOLETE   return B38400;		/* Random */ */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE  */
-/* OBSOLETE /***************************************************************** REMOTE_OPEN */
-/* OBSOLETE ** Open a connection to remote minimon. */
-/* OBSOLETE    NAME is the filename used for communication, then a space, */
-/* OBSOLETE    then the baud rate. */
-/* OBSOLETE    'target adapt /dev/ttya 9600 [prognam]' for example. */
-/* OBSOLETE  */ */
-/* OBSOLETE  */
-/* OBSOLETE static char *dev_name; */
-/* OBSOLETE int baudrate = 9600; */
-/* OBSOLETE static void */
-/* OBSOLETE mm_open (char *name, int from_tty) */
-/* OBSOLETE { */
-/* OBSOLETE   TERMINAL sg; */
-/* OBSOLETE   unsigned int prl; */
-/* OBSOLETE   char *p; */
-/* OBSOLETE  */
-/* OBSOLETE   /* Find the first whitespace character, it separates dev_name from */
-/* OBSOLETE      prog_name.  */ */
-/* OBSOLETE   for (p = name; */
-/* OBSOLETE        p && *p && !isspace (*p); p++) */
-/* OBSOLETE     ; */
-/* OBSOLETE   if (p == 0 || *p == '\0') */
-/* OBSOLETE   erroid: */
-/* OBSOLETE     error ("Usage : <command> <serial-device> <baud-rate> [progname]"); */
-/* OBSOLETE   dev_name = (char *) xmalloc (p - name + 1); */
-/* OBSOLETE   strncpy (dev_name, name, p - name); */
-/* OBSOLETE   dev_name[p - name] = '\0'; */
-/* OBSOLETE  */
-/* OBSOLETE   /* Skip over the whitespace after dev_name */ */
-/* OBSOLETE   for (; isspace (*p); p++) */
-/* OBSOLETE     /*EMPTY */ ; */
-/* OBSOLETE  */
-/* OBSOLETE   if (1 != sscanf (p, "%d ", &baudrate)) */
-/* OBSOLETE     goto erroid; */
-/* OBSOLETE  */
-/* OBSOLETE   /* Skip the number and then the spaces */ */
-/* OBSOLETE   for (; isdigit (*p); p++) */
-/* OBSOLETE     /*EMPTY */ ; */
-/* OBSOLETE   for (; isspace (*p); p++) */
-/* OBSOLETE     /*EMPTY */ ; */
-/* OBSOLETE  */
-/* OBSOLETE   if (prog_name != NULL) */
-/* OBSOLETE     xfree (prog_name); */
-/* OBSOLETE   prog_name = savestring (p, strlen (p)); */
-/* OBSOLETE  */
-/* OBSOLETE  */
-/* OBSOLETE   if (mm_desc >= 0) */
-/* OBSOLETE     close (mm_desc); */
-/* OBSOLETE  */
-/* OBSOLETE   mm_desc = open (dev_name, O_RDWR); */
-/* OBSOLETE   if (mm_desc < 0) */
-/* OBSOLETE     perror_with_name (dev_name); */
-/* OBSOLETE   ioctl (mm_desc, TIOCGETP, &sg); */
-/* OBSOLETE #ifdef HAVE_TERMIO */
-/* OBSOLETE   sg.c_cc[VMIN] = 0;		/* read with timeout.  */ */
-/* OBSOLETE   sg.c_cc[VTIME] = timeout * 10; */
-/* OBSOLETE   sg.c_lflag &= ~(ICANON | ECHO); */
-/* OBSOLETE   sg.c_cflag = (sg.c_cflag & ~CBAUD) | damn_b (baudrate); */
-/* OBSOLETE #else */
-/* OBSOLETE   sg.sg_ispeed = damn_b (baudrate); */
-/* OBSOLETE   sg.sg_ospeed = damn_b (baudrate); */
-/* OBSOLETE   sg.sg_flags |= RAW; */
-/* OBSOLETE   sg.sg_flags |= ANYP; */
-/* OBSOLETE   sg.sg_flags &= ~ECHO; */
-/* OBSOLETE #endif */
-/* OBSOLETE  */
-/* OBSOLETE  */
-/* OBSOLETE   ioctl (mm_desc, TIOCSETP, &sg); */
-/* OBSOLETE   mm_stream = fdopen (mm_desc, "r+"); */
-/* OBSOLETE  */
-/* OBSOLETE   push_target (&mm_ops); */
-/* OBSOLETE  */
-/* OBSOLETE #ifndef HAVE_TERMIO */
-/* OBSOLETE #ifndef NO_SIGINTERRUPT */
-/* OBSOLETE   /* Cause SIGALRM's to make reads fail with EINTR instead of resuming */
-/* OBSOLETE      the read.  */ */
-/* OBSOLETE   if (siginterrupt (SIGALRM, 1) != 0) */
-/* OBSOLETE     perror ("mm_open: error in siginterrupt"); */
-/* OBSOLETE #endif */
-/* OBSOLETE  */
-/* OBSOLETE   /* Set up read timeout timer.  */ */
-/* OBSOLETE   if ((void (*)) signal (SIGALRM, mm_timer) == (void (*)) -1) */
-/* OBSOLETE     perror ("mm_open: error in signal"); */
-/* OBSOLETE #endif */
-/* OBSOLETE  */
-/* OBSOLETE #if defined (LOG_FILE) */
-/* OBSOLETE   log_file = fopen (LOG_FILE, "w"); */
-/* OBSOLETE   if (log_file == NULL) */
-/* OBSOLETE     perror_with_name (LOG_FILE); */
-/* OBSOLETE #endif */
-/* OBSOLETE   /* */
-/* OBSOLETE      ** Initialize target configuration structure (global) */
-/* OBSOLETE    */ */
-/* OBSOLETE   DRAIN_INPUT (); */
-/* OBSOLETE   out_msg_buf->config_req_msg.code = CONFIG_REQ; */
-/* OBSOLETE   out_msg_buf->config_req_msg.length = 4 * 0; */
-/* OBSOLETE   msg_send_serial (out_msg_buf);	/* send config request message */ */
-/* OBSOLETE  */
-/* OBSOLETE   expect_msg (CONFIG, in_msg_buf, 1); */
-/* OBSOLETE  */
-/* OBSOLETE   a29k_get_processor_type (); */
-/* OBSOLETE  */
-/* OBSOLETE   /* Print out some stuff, letting the user now what's going on */ */
-/* OBSOLETE   printf_filtered ("Connected to MiniMon via %s.\n", dev_name); */
-/* OBSOLETE   /* FIXME: can this restriction be removed? */ */
-/* OBSOLETE   printf_filtered ("Remote debugging using virtual addresses works only\n"); */
-/* OBSOLETE   printf_filtered ("\twhen virtual addresses map 1:1 to physical addresses.\n") */
-/* OBSOLETE     ; */
-/* OBSOLETE   if (processor_type != a29k_freeze_mode) */
-/* OBSOLETE     { */
-/* OBSOLETE       fprintf_filtered (gdb_stderr, */
-/* OBSOLETE 			"Freeze-mode debugging not available, and can only be done on an A29050.\n"); */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   target_config.code = CONFIG; */
-/* OBSOLETE   target_config.length = 0; */
-/* OBSOLETE   target_config.processor_id = in_msg_buf->config_msg.processor_id; */
-/* OBSOLETE   target_config.version = in_msg_buf->config_msg.version; */
-/* OBSOLETE   target_config.I_mem_start = in_msg_buf->config_msg.I_mem_start; */
-/* OBSOLETE   target_config.I_mem_size = in_msg_buf->config_msg.I_mem_size; */
-/* OBSOLETE   target_config.D_mem_start = in_msg_buf->config_msg.D_mem_start; */
-/* OBSOLETE   target_config.D_mem_size = in_msg_buf->config_msg.D_mem_size; */
-/* OBSOLETE   target_config.ROM_start = in_msg_buf->config_msg.ROM_start; */
-/* OBSOLETE   target_config.ROM_size = in_msg_buf->config_msg.ROM_size; */
-/* OBSOLETE   target_config.max_msg_size = in_msg_buf->config_msg.max_msg_size; */
-/* OBSOLETE   target_config.max_bkpts = in_msg_buf->config_msg.max_bkpts; */
-/* OBSOLETE   target_config.coprocessor = in_msg_buf->config_msg.coprocessor; */
-/* OBSOLETE   target_config.reserved = in_msg_buf->config_msg.reserved; */
-/* OBSOLETE   if (from_tty) */
-/* OBSOLETE     { */
-/* OBSOLETE       printf ("Connected to MiniMON :\n"); */
-/* OBSOLETE       printf ("    Debugcore version            %d.%d\n", */
-/* OBSOLETE 	      0x0f & (target_config.version >> 4), */
-/* OBSOLETE 	      0x0f & (target_config.version)); */
-/* OBSOLETE       printf ("    Configuration version        %d.%d\n", */
-/* OBSOLETE 	      0x0f & (target_config.version >> 12), */
-/* OBSOLETE 	      0x0f & (target_config.version >> 8)); */
-/* OBSOLETE       printf ("    Message system version       %d.%d\n", */
-/* OBSOLETE 	      0x0f & (target_config.version >> 20), */
-/* OBSOLETE 	      0x0f & (target_config.version >> 16)); */
-/* OBSOLETE       printf ("    Communication driver version %d.%d\n", */
-/* OBSOLETE 	      0x0f & (target_config.version >> 28), */
-/* OBSOLETE 	      0x0f & (target_config.version >> 24)); */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   /* Leave the target running...  */
-/* OBSOLETE    * The above message stopped the target in the dbg core (MiniMon),   */
-/* OBSOLETE    * so restart the target out of MiniMon,  */
-/* OBSOLETE    */ */
-/* OBSOLETE   out_msg_buf->go_msg.code = GO; */
-/* OBSOLETE   out_msg_buf->go_msg.length = 0; */
-/* OBSOLETE   msg_send_serial (out_msg_buf); */
-/* OBSOLETE   /* No message to expect after a GO */ */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /**************************************************************** REMOTE_CLOSE */
-/* OBSOLETE ** Close the open connection to the minimon debugger. */
-/* OBSOLETE    Use this when you want to detach and do something else */
-/* OBSOLETE    with your gdb.  */ */
-/* OBSOLETE static void */
-/* OBSOLETE mm_close (			/*FIXME: how is quitting used */ */
-/* OBSOLETE 	   int quitting) */
-/* OBSOLETE { */
-/* OBSOLETE   if (mm_desc < 0) */
-/* OBSOLETE     error ("Can't close remote connection: not debugging remotely."); */
-/* OBSOLETE  */
-/* OBSOLETE   /* We should never get here if there isn't something valid in */
-/* OBSOLETE      mm_desc and mm_stream.   */
-/* OBSOLETE  */
-/* OBSOLETE      Due to a bug in Unix, fclose closes not only the stdio stream, */
-/* OBSOLETE      but also the file descriptor.  So we don't actually close */
-/* OBSOLETE      mm_desc.  */ */
-/* OBSOLETE   DRAIN_INPUT (); */
-/* OBSOLETE   fclose (mm_stream); */
-/* OBSOLETE   /* close (mm_desc); */ */
-/* OBSOLETE  */
-/* OBSOLETE   /* Do not try to close mm_desc again, later in the program.  */ */
-/* OBSOLETE   mm_stream = NULL; */
-/* OBSOLETE   mm_desc = -1; */
-/* OBSOLETE  */
-/* OBSOLETE #if defined (LOG_FILE) */
-/* OBSOLETE   if (ferror (log_file)) */
-/* OBSOLETE     printf ("Error writing log file.\n"); */
-/* OBSOLETE   if (fclose (log_file) != 0) */
-/* OBSOLETE     printf ("Error closing log file.\n"); */
-/* OBSOLETE #endif */
-/* OBSOLETE  */
-/* OBSOLETE   printf ("Ending remote debugging\n"); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /************************************************************* REMOTE_ATACH */ */
-/* OBSOLETE /* Attach to a program that is already loaded and running  */
-/* OBSOLETE  * Upon exiting the process's execution is stopped. */
-/* OBSOLETE  */ */
-/* OBSOLETE static void */
-/* OBSOLETE mm_attach (char *args, int from_tty) */
-/* OBSOLETE { */
-/* OBSOLETE  */
-/* OBSOLETE   if (!mm_stream) */
-/* OBSOLETE     error ("MiniMon not opened yet, use the 'target minimon' command.\n"); */
-/* OBSOLETE  */
-/* OBSOLETE   if (from_tty) */
-/* OBSOLETE     printf ("Attaching to remote program %s...\n", prog_name); */
-/* OBSOLETE  */
-/* OBSOLETE   /* Make sure the target is currently running, it is supposed to be. */ */
-/* OBSOLETE   /* FIXME: is it ok to send MiniMon a BREAK if it is already stopped in  */
-/* OBSOLETE    *  the dbg core.  If so, we don't need to send this GO. */
-/* OBSOLETE    */ */
-/* OBSOLETE   out_msg_buf->go_msg.code = GO; */
-/* OBSOLETE   out_msg_buf->go_msg.length = 0; */
-/* OBSOLETE   msg_send_serial (out_msg_buf); */
-/* OBSOLETE   sleep (2);			/* At the worst it will stop, receive a message, continue */ */
-/* OBSOLETE  */
-/* OBSOLETE   /* Send the mm a break. */ */
-/* OBSOLETE   out_msg_buf->break_msg.code = BREAK; */
-/* OBSOLETE   out_msg_buf->break_msg.length = 0; */
-/* OBSOLETE   msg_send_serial (out_msg_buf); */
-/* OBSOLETE } */
-/* OBSOLETE /********************************************************** REMOTE_DETACH */ */
-/* OBSOLETE /* Terminate the open connection to the remote debugger. */
-/* OBSOLETE    Use this when you want to detach and do something else */
-/* OBSOLETE    with your gdb.  Leave remote process running (with no breakpoints set). */ */
-/* OBSOLETE static void */
-/* OBSOLETE mm_detach (char *args, int from_tty) */
-/* OBSOLETE { */
-/* OBSOLETE   remove_breakpoints ();	/* Just in case there were any left in */ */
-/* OBSOLETE   out_msg_buf->go_msg.code = GO; */
-/* OBSOLETE   out_msg_buf->go_msg.length = 0; */
-/* OBSOLETE   msg_send_serial (out_msg_buf); */
-/* OBSOLETE   pop_target ();		/* calls mm_close to do the real work */ */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE  */
-/* OBSOLETE /*************************************************************** REMOTE_RESUME */
-/* OBSOLETE ** Tell the remote machine to resume.  */ */
-/* OBSOLETE  */
-/* OBSOLETE static void */
-/* OBSOLETE mm_resume (ptid_t ptid, int step, enum target_signal sig) */
-/* OBSOLETE { */
-/* OBSOLETE   if (sig != TARGET_SIGNAL_0) */
-/* OBSOLETE     warning ("Can't send signals to a remote MiniMon system."); */
-/* OBSOLETE  */
-/* OBSOLETE   if (step) */
-/* OBSOLETE     { */
-/* OBSOLETE       out_msg_buf->step_msg.code = STEP; */
-/* OBSOLETE       out_msg_buf->step_msg.length = 1 * 4; */
-/* OBSOLETE       out_msg_buf->step_msg.count = 1;	/* step 1 instruction */ */
-/* OBSOLETE       msg_send_serial (out_msg_buf); */
-/* OBSOLETE     } */
-/* OBSOLETE   else */
-/* OBSOLETE     { */
-/* OBSOLETE       out_msg_buf->go_msg.code = GO; */
-/* OBSOLETE       out_msg_buf->go_msg.length = 0; */
-/* OBSOLETE       msg_send_serial (out_msg_buf); */
-/* OBSOLETE     } */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /***************************************************************** REMOTE_WAIT */
-/* OBSOLETE ** Wait until the remote machine stops, then return, */
-/* OBSOLETE    storing status in STATUS just as `wait' would.  */ */
-/* OBSOLETE  */
-/* OBSOLETE static ptid_t */
-/* OBSOLETE mm_wait (ptid_t ptid, struct target_waitstatus *status) */
-/* OBSOLETE { */
-/* OBSOLETE   int i, result; */
-/* OBSOLETE   int old_timeout = timeout; */
-/* OBSOLETE   int old_immediate_quit = immediate_quit; */
-/* OBSOLETE  */
-/* OBSOLETE   status->kind = TARGET_WAITKIND_EXITED; */
-/* OBSOLETE   status->value.integer = 0; */
-/* OBSOLETE  */
-/* OBSOLETE /* wait for message to arrive. It should be: */
-/* OBSOLETE    - A HIF service request. */
-/* OBSOLETE    - A HIF exit service request. */
-/* OBSOLETE    - A CHANNEL0_ACK. */
-/* OBSOLETE    - A CHANNEL1 request. */
-/* OBSOLETE    - a debugcore HALT message. */
-/* OBSOLETE    HIF services must be responded too, and while-looping continued. */
-/* OBSOLETE    If the target stops executing, mm_wait() should return. */
-/* OBSOLETE  */ */
-/* OBSOLETE   timeout = 0;			/* Wait indefinetly for a message */ */
-/* OBSOLETE   immediate_quit = 1;		/* Helps ability to QUIT */ */
-/* OBSOLETE   while (1) */
-/* OBSOLETE     { */
-/* OBSOLETE       while (msg_recv_serial (in_msg_buf)) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  QUIT;			/* Let user quit if they want */ */
-/* OBSOLETE 	} */
-/* OBSOLETE       switch (in_msg_buf->halt_msg.code) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	case HIF_CALL: */
-/* OBSOLETE 	  i = in_msg_buf->hif_call_rtn_msg.service_number; */
-/* OBSOLETE 	  result = service_HIF (in_msg_buf); */
-/* OBSOLETE 	  if (i == 1)		/* EXIT */ */
-/* OBSOLETE 	    goto exit; */
-/* OBSOLETE 	  if (result) */
-/* OBSOLETE 	    printf ("Warning: failure during HIF service %d\n", i); */
-/* OBSOLETE 	  break; */
-/* OBSOLETE 	case CHANNEL0_ACK: */
-/* OBSOLETE 	  service_HIF (in_msg_buf); */
-/* OBSOLETE 	  break; */
-/* OBSOLETE 	case CHANNEL1: */
-/* OBSOLETE 	  i = in_msg_buf->channel1_msg.length; */
-/* OBSOLETE 	  in_msg_buf->channel1_msg.data[i] = '\0'; */
-/* OBSOLETE 	  printf ("%s", in_msg_buf->channel1_msg.data); */
-/* OBSOLETE 	  gdb_flush (gdb_stdout); */
-/* OBSOLETE 	  /* Send CHANNEL1_ACK message */ */
-/* OBSOLETE 	  out_msg_buf->channel1_ack_msg.code = CHANNEL1_ACK; */
-/* OBSOLETE 	  out_msg_buf->channel1_ack_msg.length = 0; */
-/* OBSOLETE 	  result = msg_send_serial (out_msg_buf); */
-/* OBSOLETE 	  break; */
-/* OBSOLETE 	case HALT: */
-/* OBSOLETE 	  goto halted; */
-/* OBSOLETE 	default: */
-/* OBSOLETE 	  goto halted; */
-/* OBSOLETE 	} */
-/* OBSOLETE     } */
-/* OBSOLETE halted: */
-/* OBSOLETE   /* FIXME, these printfs should not be here.  This is a source level  */
-/* OBSOLETE      debugger, guys!  */ */
-/* OBSOLETE   if (in_msg_buf->halt_msg.trap_number == 0) */
-/* OBSOLETE     { */
-/* OBSOLETE       printf ("Am290*0 received vector number %d (break point)\n", */
-/* OBSOLETE 	      in_msg_buf->halt_msg.trap_number); */
-/* OBSOLETE       status->kind = TARGET_WAITKIND_STOPPED; */
-/* OBSOLETE       status->value.sig = TARGET_SIGNAL_TRAP; */
-/* OBSOLETE     } */
-/* OBSOLETE   else if (in_msg_buf->halt_msg.trap_number == 1) */
-/* OBSOLETE     { */
-/* OBSOLETE       printf ("Am290*0 received vector number %d\n", */
-/* OBSOLETE 	      in_msg_buf->halt_msg.trap_number); */
-/* OBSOLETE       status->kind = TARGET_WAITKIND_STOPPED; */
-/* OBSOLETE       status->value.sig = TARGET_SIGNAL_BUS; */
-/* OBSOLETE     } */
-/* OBSOLETE   else if (in_msg_buf->halt_msg.trap_number == 3 */
-/* OBSOLETE 	   || in_msg_buf->halt_msg.trap_number == 4) */
-/* OBSOLETE     { */
-/* OBSOLETE       printf ("Am290*0 received vector number %d\n", */
-/* OBSOLETE 	      in_msg_buf->halt_msg.trap_number); */
-/* OBSOLETE       status->kind = TARGET_WAITKIND_STOPPED; */
-/* OBSOLETE       status->value.sig = TARGET_SIGNAL_FPE; */
-/* OBSOLETE     } */
-/* OBSOLETE   else if (in_msg_buf->halt_msg.trap_number == 5) */
-/* OBSOLETE     { */
-/* OBSOLETE       printf ("Am290*0 received vector number %d\n", */
-/* OBSOLETE 	      in_msg_buf->halt_msg.trap_number); */
-/* OBSOLETE       status->kind = TARGET_WAITKIND_STOPPED; */
-/* OBSOLETE       status->value.sig = TARGET_SIGNAL_ILL; */
-/* OBSOLETE     } */
-/* OBSOLETE   else if (in_msg_buf->halt_msg.trap_number >= 6 */
-/* OBSOLETE 	   && in_msg_buf->halt_msg.trap_number <= 11) */
-/* OBSOLETE     { */
-/* OBSOLETE       printf ("Am290*0 received vector number %d\n", */
-/* OBSOLETE 	      in_msg_buf->halt_msg.trap_number); */
-/* OBSOLETE       status->kind = TARGET_WAITKIND_STOPPED; */
-/* OBSOLETE       status->value.sig = TARGET_SIGNAL_SEGV; */
-/* OBSOLETE     } */
-/* OBSOLETE   else if (in_msg_buf->halt_msg.trap_number == 12 */
-/* OBSOLETE 	   || in_msg_buf->halt_msg.trap_number == 13) */
-/* OBSOLETE     { */
-/* OBSOLETE       printf ("Am290*0 received vector number %d\n", */
-/* OBSOLETE 	      in_msg_buf->halt_msg.trap_number); */
-/* OBSOLETE       status->kind = TARGET_WAITKIND_STOPPED; */
-/* OBSOLETE       status->value.sig = TARGET_SIGNAL_ILL; */
-/* OBSOLETE     } */
-/* OBSOLETE   else if (in_msg_buf->halt_msg.trap_number == 14) */
-/* OBSOLETE     { */
-/* OBSOLETE       printf ("Am290*0 received vector number %d\n", */
-/* OBSOLETE 	      in_msg_buf->halt_msg.trap_number); */
-/* OBSOLETE       status->kind = TARGET_WAITKIND_STOPPED; */
-/* OBSOLETE       status->value.sig = TARGET_SIGNAL_ALRM; */
-/* OBSOLETE     } */
-/* OBSOLETE   else if (in_msg_buf->halt_msg.trap_number == 15) */
-/* OBSOLETE     { */
-/* OBSOLETE       status->kind = TARGET_WAITKIND_STOPPED; */
-/* OBSOLETE       status->value.sig = TARGET_SIGNAL_TRAP; */
-/* OBSOLETE     } */
-/* OBSOLETE   else if (in_msg_buf->halt_msg.trap_number >= 16 */
-/* OBSOLETE 	   && in_msg_buf->halt_msg.trap_number <= 21) */
-/* OBSOLETE     { */
-/* OBSOLETE       printf ("Am290*0 received vector number %d\n", */
-/* OBSOLETE 	      in_msg_buf->halt_msg.trap_number); */
-/* OBSOLETE       status->kind = TARGET_WAITKIND_STOPPED; */
-/* OBSOLETE       status->value.sig = TARGET_SIGNAL_INT; */
-/* OBSOLETE     } */
-/* OBSOLETE   else if (in_msg_buf->halt_msg.trap_number == 22) */
-/* OBSOLETE     { */
-/* OBSOLETE       printf ("Am290*0 received vector number %d\n", */
-/* OBSOLETE 	      in_msg_buf->halt_msg.trap_number); */
-/* OBSOLETE       status->kind = TARGET_WAITKIND_STOPPED; */
-/* OBSOLETE       status->value.sig = TARGET_SIGNAL_ILL; */
-/* OBSOLETE     }				/* BREAK message was sent */ */
-/* OBSOLETE   else if (in_msg_buf->halt_msg.trap_number == 75) */
-/* OBSOLETE     { */
-/* OBSOLETE       status->kind = TARGET_WAITKIND_STOPPED; */
-/* OBSOLETE       status->value.sig = TARGET_SIGNAL_TRAP; */
-/* OBSOLETE     } */
-/* OBSOLETE   else */
-/* OBSOLETE   exit: */
-/* OBSOLETE     { */
-/* OBSOLETE       status->kind = TARGET_WAITKIND_EXITED; */
-/* OBSOLETE       status->value.integer = 0; */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   timeout = old_timeout;	/* Restore original timeout value */ */
-/* OBSOLETE   immediate_quit = old_immediate_quit; */
-/* OBSOLETE   return inferior_ptid; */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /******************************************************* REMOTE_FETCH_REGISTERS */
-/* OBSOLETE  * Read a remote register 'regno'.  */
-/* OBSOLETE  * If regno==-1 then read all the registers. */
-/* OBSOLETE  */ */
-/* OBSOLETE static void */
-/* OBSOLETE mm_fetch_registers (int regno) */
-/* OBSOLETE { */
-/* OBSOLETE   INT32 *data_p; */
-/* OBSOLETE  */
-/* OBSOLETE   if (regno >= 0) */
-/* OBSOLETE     { */
-/* OBSOLETE       fetch_register (regno); */
-/* OBSOLETE       return; */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE /* Gr1/rsp */ */
-/* OBSOLETE   out_msg_buf->read_req_msg.byte_count = 4 * 1; */
-/* OBSOLETE   out_msg_buf->read_req_msg.memory_space = GLOBAL_REG; */
-/* OBSOLETE   out_msg_buf->read_req_msg.address = 1; */
-/* OBSOLETE   msg_send_serial (out_msg_buf); */
-/* OBSOLETE   expect_msg (READ_ACK, in_msg_buf, 1); */
-/* OBSOLETE   data_p = &(in_msg_buf->read_r_ack_msg.data[0]); */
-/* OBSOLETE   supply_register (GR1_REGNUM, data_p); */
-/* OBSOLETE  */
-/* OBSOLETE #if defined(GR64_REGNUM)	/* Read gr64-127 */ */
-/* OBSOLETE /* Global Registers gr64-gr95 */ */
-/* OBSOLETE   out_msg_buf->read_req_msg.code = READ_REQ; */
-/* OBSOLETE   out_msg_buf->read_req_msg.length = 4 * 3; */
-/* OBSOLETE   out_msg_buf->read_req_msg.byte_count = 4 * 32; */
-/* OBSOLETE   out_msg_buf->read_req_msg.memory_space = GLOBAL_REG; */
-/* OBSOLETE   out_msg_buf->read_req_msg.address = 64; */
-/* OBSOLETE   msg_send_serial (out_msg_buf); */
-/* OBSOLETE   expect_msg (READ_ACK, in_msg_buf, 1); */
-/* OBSOLETE   data_p = &(in_msg_buf->read_r_ack_msg.data[0]); */
-/* OBSOLETE  */
-/* OBSOLETE   for (regno = GR64_REGNUM; regno < GR64_REGNUM + 32; regno++) */
-/* OBSOLETE     { */
-/* OBSOLETE       supply_register (regno, data_p++); */
-/* OBSOLETE     } */
-/* OBSOLETE #endif /*  GR64_REGNUM */ */
-/* OBSOLETE  */
-/* OBSOLETE /* Global Registers gr96-gr127 */ */
-/* OBSOLETE   out_msg_buf->read_req_msg.code = READ_REQ; */
-/* OBSOLETE   out_msg_buf->read_req_msg.length = 4 * 3; */
-/* OBSOLETE   out_msg_buf->read_req_msg.byte_count = 4 * 32; */
-/* OBSOLETE   out_msg_buf->read_req_msg.memory_space = GLOBAL_REG; */
-/* OBSOLETE   out_msg_buf->read_req_msg.address = 96; */
-/* OBSOLETE   msg_send_serial (out_msg_buf); */
-/* OBSOLETE   expect_msg (READ_ACK, in_msg_buf, 1); */
-/* OBSOLETE   data_p = &(in_msg_buf->read_r_ack_msg.data[0]); */
-/* OBSOLETE  */
-/* OBSOLETE   for (regno = GR96_REGNUM; regno < GR96_REGNUM + 32; regno++) */
-/* OBSOLETE     { */
-/* OBSOLETE       supply_register (regno, data_p++); */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE /* Local Registers */ */
-/* OBSOLETE   out_msg_buf->read_req_msg.byte_count = 4 * (128); */
-/* OBSOLETE   out_msg_buf->read_req_msg.memory_space = LOCAL_REG; */
-/* OBSOLETE   out_msg_buf->read_req_msg.address = 0; */
-/* OBSOLETE   msg_send_serial (out_msg_buf); */
-/* OBSOLETE   expect_msg (READ_ACK, in_msg_buf, 1); */
-/* OBSOLETE   data_p = &(in_msg_buf->read_r_ack_msg.data[0]); */
-/* OBSOLETE  */
-/* OBSOLETE   for (regno = LR0_REGNUM; regno < LR0_REGNUM + 128; regno++) */
-/* OBSOLETE     { */
-/* OBSOLETE       supply_register (regno, data_p++); */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE /* Protected Special Registers */ */
-/* OBSOLETE   out_msg_buf->read_req_msg.byte_count = 4 * 15; */
-/* OBSOLETE   out_msg_buf->read_req_msg.memory_space = SPECIAL_REG; */
-/* OBSOLETE   out_msg_buf->read_req_msg.address = 0; */
-/* OBSOLETE   msg_send_serial (out_msg_buf); */
-/* OBSOLETE   expect_msg (READ_ACK, in_msg_buf, 1); */
-/* OBSOLETE   data_p = &(in_msg_buf->read_r_ack_msg.data[0]); */
-/* OBSOLETE  */
-/* OBSOLETE   for (regno = 0; regno <= 14; regno++) */
-/* OBSOLETE     { */
-/* OBSOLETE       supply_register (SR_REGNUM (regno), data_p++); */
-/* OBSOLETE     } */
-/* OBSOLETE   if (USE_SHADOW_PC) */
-/* OBSOLETE     {				/* Let regno_to_srnum() handle the register number */ */
-/* OBSOLETE       fetch_register (NPC_REGNUM); */
-/* OBSOLETE       fetch_register (PC_REGNUM); */
-/* OBSOLETE       fetch_register (PC2_REGNUM); */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE /* Unprotected Special Registers */ */
-/* OBSOLETE   out_msg_buf->read_req_msg.byte_count = 4 * 8; */
-/* OBSOLETE   out_msg_buf->read_req_msg.memory_space = SPECIAL_REG; */
-/* OBSOLETE   out_msg_buf->read_req_msg.address = 128; */
-/* OBSOLETE   msg_send_serial (out_msg_buf); */
-/* OBSOLETE   expect_msg (READ_ACK, in_msg_buf, 1); */
-/* OBSOLETE   data_p = &(in_msg_buf->read_r_ack_msg.data[0]); */
-/* OBSOLETE  */
-/* OBSOLETE   for (regno = 128; regno <= 135; regno++) */
-/* OBSOLETE     { */
-/* OBSOLETE       supply_register (SR_REGNUM (regno), data_p++); */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   /* There doesn't seem to be any way to get these.  */ */
-/* OBSOLETE   { */
-/* OBSOLETE     int val = -1; */
-/* OBSOLETE     supply_register (FPE_REGNUM, &val); */
-/* OBSOLETE     supply_register (INTE_REGNUM, &val); */
-/* OBSOLETE     supply_register (FPS_REGNUM, &val); */
-/* OBSOLETE     supply_register (EXO_REGNUM, &val); */
-/* OBSOLETE   } */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE  */
-/* OBSOLETE /****************************************************** REMOTE_STORE_REGISTERS */
-/* OBSOLETE  * Store register regno into the target.   */
-/* OBSOLETE  * If regno==-1 then store all the registers. */
-/* OBSOLETE  * Result is 0 for success, -1 for failure. */
-/* OBSOLETE  */ */
-/* OBSOLETE  */
-/* OBSOLETE static void */
-/* OBSOLETE mm_store_registers (int regno) */
-/* OBSOLETE { */
-/* OBSOLETE   int result; */
-/* OBSOLETE  */
-/* OBSOLETE   if (regno >= 0) */
-/* OBSOLETE     { */
-/* OBSOLETE       store_register (regno); */
-/* OBSOLETE       return; */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   result = 0; */
-/* OBSOLETE  */
-/* OBSOLETE   out_msg_buf->write_r_msg.code = WRITE_REQ; */
-/* OBSOLETE  */
-/* OBSOLETE /* Gr1/rsp */ */
-/* OBSOLETE   out_msg_buf->write_r_msg.byte_count = 4 * 1; */
-/* OBSOLETE   out_msg_buf->write_r_msg.length = 3 * 4 + out_msg_buf->write_r_msg.byte_count; */
-/* OBSOLETE   out_msg_buf->write_r_msg.memory_space = GLOBAL_REG; */
-/* OBSOLETE   out_msg_buf->write_r_msg.address = 1; */
-/* OBSOLETE   out_msg_buf->write_r_msg.data[0] = read_register (GR1_REGNUM); */
-/* OBSOLETE  */
-/* OBSOLETE   msg_send_serial (out_msg_buf); */
-/* OBSOLETE   if (!expect_msg (WRITE_ACK, in_msg_buf, 1)) */
-/* OBSOLETE     { */
-/* OBSOLETE       result = -1; */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE #if defined(GR64_REGNUM) */
-/* OBSOLETE /* Global registers gr64-gr95 */ */
-/* OBSOLETE   out_msg_buf->write_r_msg.byte_count = 4 * (32); */
-/* OBSOLETE   out_msg_buf->write_r_msg.length = 3 * 4 + out_msg_buf->write_r_msg.byte_count; */
-/* OBSOLETE   out_msg_buf->write_r_msg.address = 64; */
-/* OBSOLETE  */
-/* OBSOLETE   for (regno = GR64_REGNUM; regno < GR64_REGNUM + 32; regno++) */
-/* OBSOLETE     { */
-/* OBSOLETE       out_msg_buf->write_r_msg.data[regno - GR64_REGNUM] = read_register (regno); */
-/* OBSOLETE     } */
-/* OBSOLETE   msg_send_serial (out_msg_buf); */
-/* OBSOLETE   if (!expect_msg (WRITE_ACK, in_msg_buf, 1)) */
-/* OBSOLETE     { */
-/* OBSOLETE       result = -1; */
-/* OBSOLETE     } */
-/* OBSOLETE #endif /* GR64_REGNUM */ */
-/* OBSOLETE  */
-/* OBSOLETE /* Global registers gr96-gr127 */ */
-/* OBSOLETE   out_msg_buf->write_r_msg.byte_count = 4 * (32); */
-/* OBSOLETE   out_msg_buf->write_r_msg.length = 3 * 4 + out_msg_buf->write_r_msg.byte_count; */
-/* OBSOLETE   out_msg_buf->write_r_msg.address = 96; */
-/* OBSOLETE   for (regno = GR96_REGNUM; regno < GR96_REGNUM + 32; regno++) */
-/* OBSOLETE     { */
-/* OBSOLETE       out_msg_buf->write_r_msg.data[regno - GR96_REGNUM] = read_register (regno); */
-/* OBSOLETE     } */
-/* OBSOLETE   msg_send_serial (out_msg_buf); */
-/* OBSOLETE   if (!expect_msg (WRITE_ACK, in_msg_buf, 1)) */
-/* OBSOLETE     { */
-/* OBSOLETE       result = -1; */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE /* Local Registers */ */
-/* OBSOLETE   out_msg_buf->write_r_msg.memory_space = LOCAL_REG; */
-/* OBSOLETE   out_msg_buf->write_r_msg.byte_count = 4 * 128; */
-/* OBSOLETE   out_msg_buf->write_r_msg.length = 3 * 4 + out_msg_buf->write_r_msg.byte_count; */
-/* OBSOLETE   out_msg_buf->write_r_msg.address = 0; */
-/* OBSOLETE  */
-/* OBSOLETE   for (regno = LR0_REGNUM; regno < LR0_REGNUM + 128; regno++) */
-/* OBSOLETE     { */
-/* OBSOLETE       out_msg_buf->write_r_msg.data[regno - LR0_REGNUM] = read_register (regno); */
-/* OBSOLETE     } */
-/* OBSOLETE   msg_send_serial (out_msg_buf); */
-/* OBSOLETE   if (!expect_msg (WRITE_ACK, in_msg_buf, 1)) */
-/* OBSOLETE     { */
-/* OBSOLETE       result = -1; */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE /* Protected Special Registers */ */
-/* OBSOLETE   /* VAB through TMR */ */
-/* OBSOLETE   out_msg_buf->write_r_msg.memory_space = SPECIAL_REG; */
-/* OBSOLETE   out_msg_buf->write_r_msg.byte_count = 4 * 10; */
-/* OBSOLETE   out_msg_buf->write_r_msg.length = 3 * 4 + out_msg_buf->write_r_msg.byte_count; */
-/* OBSOLETE   out_msg_buf->write_r_msg.address = 0; */
-/* OBSOLETE   for (regno = 0; regno <= 9; regno++)	/* VAB through TMR */ */
-/* OBSOLETE     out_msg_buf->write_r_msg.data[regno] = read_register (SR_REGNUM (regno)); */
-/* OBSOLETE   msg_send_serial (out_msg_buf); */
-/* OBSOLETE   if (!expect_msg (WRITE_ACK, in_msg_buf, 1)) */
-/* OBSOLETE     { */
-/* OBSOLETE       result = -1; */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   /* PC0, PC1, PC2 possibly as shadow registers */ */
-/* OBSOLETE   out_msg_buf->write_r_msg.byte_count = 4 * 3; */
-/* OBSOLETE   out_msg_buf->write_r_msg.length = 3 * 4 + out_msg_buf->write_r_msg.byte_count; */
-/* OBSOLETE   for (regno = 10; regno <= 12; regno++)	/* LRU and MMU */ */
-/* OBSOLETE     out_msg_buf->write_r_msg.data[regno - 10] = read_register (SR_REGNUM (regno)); */
-/* OBSOLETE   if (USE_SHADOW_PC) */
-/* OBSOLETE     out_msg_buf->write_r_msg.address = 20;	/* SPC0 */ */
-/* OBSOLETE   else */
-/* OBSOLETE     out_msg_buf->write_r_msg.address = 10;	/* PC0 */ */
-/* OBSOLETE   msg_send_serial (out_msg_buf); */
-/* OBSOLETE   if (!expect_msg (WRITE_ACK, in_msg_buf, 1)) */
-/* OBSOLETE     { */
-/* OBSOLETE       result = -1; */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   /* LRU and MMU */ */
-/* OBSOLETE   out_msg_buf->write_r_msg.byte_count = 4 * 2; */
-/* OBSOLETE   out_msg_buf->write_r_msg.length = 3 * 4 + out_msg_buf->write_r_msg.byte_count; */
-/* OBSOLETE   out_msg_buf->write_r_msg.address = 13; */
-/* OBSOLETE   for (regno = 13; regno <= 14; regno++)	/* LRU and MMU */ */
-/* OBSOLETE     out_msg_buf->write_r_msg.data[regno - 13] = read_register (SR_REGNUM (regno)); */
-/* OBSOLETE   msg_send_serial (out_msg_buf); */
-/* OBSOLETE   if (!expect_msg (WRITE_ACK, in_msg_buf, 1)) */
-/* OBSOLETE     { */
-/* OBSOLETE       result = -1; */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE /* Unprotected Special Registers */ */
-/* OBSOLETE   out_msg_buf->write_r_msg.byte_count = 4 * 8; */
-/* OBSOLETE   out_msg_buf->write_r_msg.length = 3 * 4 + out_msg_buf->write_r_msg.byte_count; */
-/* OBSOLETE   out_msg_buf->write_r_msg.address = 128; */
-/* OBSOLETE   for (regno = 128; regno <= 135; regno++) */
-/* OBSOLETE     out_msg_buf->write_r_msg.data[regno - 128] = read_register (SR_REGNUM (regno)); */
-/* OBSOLETE   msg_send_serial (out_msg_buf); */
-/* OBSOLETE   if (!expect_msg (WRITE_ACK, in_msg_buf, 1)) */
-/* OBSOLETE     { */
-/* OBSOLETE       result = -1; */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   registers_changed (); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /*************************************************** REMOTE_PREPARE_TO_STORE */ */
-/* OBSOLETE /* Get ready to modify the registers array.  On machines which store */
-/* OBSOLETE    individual registers, this doesn't need to do anything.  On machines */
-/* OBSOLETE    which store all the registers in one fell swoop, this makes sure */
-/* OBSOLETE    that registers contains all the registers from the program being */
-/* OBSOLETE    debugged.  */ */
-/* OBSOLETE  */
-/* OBSOLETE static void */
-/* OBSOLETE mm_prepare_to_store (void) */
-/* OBSOLETE { */
-/* OBSOLETE   /* Do nothing, since we can store individual regs */ */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /******************************************************* REMOTE_XFER_MEMORY */ */
-/* OBSOLETE static CORE_ADDR */
-/* OBSOLETE translate_addr (CORE_ADDR addr) */
-/* OBSOLETE { */
-/* OBSOLETE #if defined(KERNEL_DEBUGGING) */
-/* OBSOLETE   /* Check for a virtual address in the kernel */ */
-/* OBSOLETE   /* Assume physical address of ublock is in  paddr_u register */ */
-/* OBSOLETE   /* FIXME: doesn't work for user virtual addresses */ */
-/* OBSOLETE   if (addr >= UVADDR) */
-/* OBSOLETE     { */
-/* OBSOLETE       /* PADDR_U register holds the physical address of the ublock */ */
-/* OBSOLETE       CORE_ADDR i = (CORE_ADDR) read_register (PADDR_U_REGNUM); */
-/* OBSOLETE       return (i + addr - (CORE_ADDR) UVADDR); */
-/* OBSOLETE     } */
-/* OBSOLETE   else */
-/* OBSOLETE     { */
-/* OBSOLETE       return (addr); */
-/* OBSOLETE     } */
-/* OBSOLETE #else */
-/* OBSOLETE   return (addr); */
-/* OBSOLETE #endif */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /******************************************************* REMOTE_FILES_INFO */ */
-/* OBSOLETE static void */
-/* OBSOLETE mm_files_info (void) */
-/* OBSOLETE { */
-/* OBSOLETE   printf ("\tAttached to %s at %d baud and running program %s.\n", */
-/* OBSOLETE 	  dev_name, baudrate, prog_name); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /************************************************* REMOTE_INSERT_BREAKPOINT */ */
-/* OBSOLETE static int */
-/* OBSOLETE mm_insert_breakpoint (CORE_ADDR addr, char *contents_cache) */
-/* OBSOLETE { */
-/* OBSOLETE   out_msg_buf->bkpt_set_msg.code = BKPT_SET; */
-/* OBSOLETE   out_msg_buf->bkpt_set_msg.length = 4 * 4; */
-/* OBSOLETE   out_msg_buf->bkpt_set_msg.memory_space = I_MEM; */
-/* OBSOLETE   out_msg_buf->bkpt_set_msg.bkpt_addr = (ADDR32) addr; */
-/* OBSOLETE   out_msg_buf->bkpt_set_msg.pass_count = 1; */
-/* OBSOLETE   out_msg_buf->bkpt_set_msg.bkpt_type = -1;	/* use illop for 29000 */ */
-/* OBSOLETE   msg_send_serial (out_msg_buf); */
-/* OBSOLETE   if (expect_msg (BKPT_SET_ACK, in_msg_buf, 1)) */
-/* OBSOLETE     { */
-/* OBSOLETE       return 0;			/* Success */ */
-/* OBSOLETE     } */
-/* OBSOLETE   else */
-/* OBSOLETE     { */
-/* OBSOLETE       return 1;			/* Failure */ */
-/* OBSOLETE     } */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /************************************************* REMOTE_DELETE_BREAKPOINT */ */
-/* OBSOLETE static int */
-/* OBSOLETE mm_remove_breakpoint (CORE_ADDR addr, char *contents_cache) */
-/* OBSOLETE { */
-/* OBSOLETE   out_msg_buf->bkpt_rm_msg.code = BKPT_RM; */
-/* OBSOLETE   out_msg_buf->bkpt_rm_msg.length = 4 * 3; */
-/* OBSOLETE   out_msg_buf->bkpt_rm_msg.memory_space = I_MEM; */
-/* OBSOLETE   out_msg_buf->bkpt_rm_msg.bkpt_addr = (ADDR32) addr; */
-/* OBSOLETE   msg_send_serial (out_msg_buf); */
-/* OBSOLETE   if (expect_msg (BKPT_RM_ACK, in_msg_buf, 1)) */
-/* OBSOLETE     { */
-/* OBSOLETE       return 0;			/* Success */ */
-/* OBSOLETE     } */
-/* OBSOLETE   else */
-/* OBSOLETE     { */
-/* OBSOLETE       return 1;			/* Failure */ */
-/* OBSOLETE     } */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE  */
-/* OBSOLETE /******************************************************* REMOTE_KILL */ */
-/* OBSOLETE static void */
-/* OBSOLETE mm_kill (char *arg, int from_tty) */
-/* OBSOLETE { */
-/* OBSOLETE   char buf[4]; */
-/* OBSOLETE  */
-/* OBSOLETE #if defined(KERNEL_DEBUGGING) */
-/* OBSOLETE   /* We don't ever kill the kernel */ */
-/* OBSOLETE   if (from_tty) */
-/* OBSOLETE     { */
-/* OBSOLETE       printf ("Kernel not killed, but left in current state.\n"); */
-/* OBSOLETE       printf ("Use detach to leave kernel running.\n"); */
-/* OBSOLETE     } */
-/* OBSOLETE #else */
-/* OBSOLETE   out_msg_buf->break_msg.code = BREAK; */
-/* OBSOLETE   out_msg_buf->bkpt_set_msg.length = 4 * 0; */
-/* OBSOLETE   expect_msg (HALT, in_msg_buf, from_tty); */
-/* OBSOLETE   if (from_tty) */
-/* OBSOLETE     { */
-/* OBSOLETE       printf ("Target has been stopped."); */
-/* OBSOLETE       printf ("Would you like to do a hardware reset (y/n) [n] "); */
-/* OBSOLETE       fgets (buf, 3, stdin); */
-/* OBSOLETE       if (buf[0] == 'y') */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  out_msg_buf->reset_msg.code = RESET; */
-/* OBSOLETE 	  out_msg_buf->bkpt_set_msg.length = 4 * 0; */
-/* OBSOLETE 	  expect_msg (RESET_ACK, in_msg_buf, from_tty); */
-/* OBSOLETE 	  printf ("Target has been reset."); */
-/* OBSOLETE 	} */
-/* OBSOLETE     } */
-/* OBSOLETE   pop_target (); */
-/* OBSOLETE #endif */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE  */
-/* OBSOLETE  */
-/* OBSOLETE /***************************************************************************/ */
-/* OBSOLETE /*  */
-/* OBSOLETE  * Load a program into the target. */
-/* OBSOLETE  */ */
-/* OBSOLETE static void */
-/* OBSOLETE mm_load (char *arg_string, int from_tty) */
-/* OBSOLETE { */
-/* OBSOLETE   dont_repeat (); */
-/* OBSOLETE  */
-/* OBSOLETE #if defined(KERNEL_DEBUGGING) */
-/* OBSOLETE   printf ("The kernel had better be loaded already!  Loading not done.\n"); */
-/* OBSOLETE #else */
-/* OBSOLETE   if (arg_string == 0) */
-/* OBSOLETE     error ("The load command takes a file name"); */
-/* OBSOLETE  */
-/* OBSOLETE   arg_string = tilde_expand (arg_string); */
-/* OBSOLETE   make_cleanup (xfree, arg_string); */
-/* OBSOLETE   QUIT; */
-/* OBSOLETE   immediate_quit++; */
-/* OBSOLETE   error ("File loading is not yet supported for MiniMon."); */
-/* OBSOLETE   /* FIXME, code to load your file here... */ */
-/* OBSOLETE   /* You may need to do an init_target_mm() */ */
-/* OBSOLETE   /* init_target_mm(?,?,?,?,?,?,?,?); */ */
-/* OBSOLETE   immediate_quit--; */
-/* OBSOLETE   /* symbol_file_add (arg_string, from_tty, text_addr, 0, 0); */ */
-/* OBSOLETE #endif */
-/* OBSOLETE  */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /************************************************ REMOTE_WRITE_INFERIOR_MEMORY */
-/* OBSOLETE ** Copy LEN bytes of data from debugger memory at MYADDR */
-/* OBSOLETE    to inferior's memory at MEMADDR.  Returns number of bytes written.  */ */
-/* OBSOLETE static int */
-/* OBSOLETE mm_write_inferior_memory (CORE_ADDR memaddr, char *myaddr, int len) */
-/* OBSOLETE { */
-/* OBSOLETE   int i, nwritten; */
-/* OBSOLETE  */
-/* OBSOLETE   out_msg_buf->write_req_msg.code = WRITE_REQ; */
-/* OBSOLETE   out_msg_buf->write_req_msg.memory_space = mm_memory_space (memaddr); */
-/* OBSOLETE  */
-/* OBSOLETE   nwritten = 0; */
-/* OBSOLETE   while (nwritten < len) */
-/* OBSOLETE     { */
-/* OBSOLETE       int num_to_write = len - nwritten; */
-/* OBSOLETE       if (num_to_write > MAXDATA) */
-/* OBSOLETE 	num_to_write = MAXDATA; */
-/* OBSOLETE       for (i = 0; i < num_to_write; i++) */
-/* OBSOLETE 	out_msg_buf->write_req_msg.data[i] = myaddr[i + nwritten]; */
-/* OBSOLETE       out_msg_buf->write_req_msg.byte_count = num_to_write; */
-/* OBSOLETE       out_msg_buf->write_req_msg.length = 3 * 4 + num_to_write; */
-/* OBSOLETE       out_msg_buf->write_req_msg.address = memaddr + nwritten; */
-/* OBSOLETE       msg_send_serial (out_msg_buf); */
-/* OBSOLETE  */
-/* OBSOLETE       if (expect_msg (WRITE_ACK, in_msg_buf, 1)) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  nwritten += in_msg_buf->write_ack_msg.byte_count; */
-/* OBSOLETE 	} */
-/* OBSOLETE       else */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  break; */
-/* OBSOLETE 	} */
-/* OBSOLETE     } */
-/* OBSOLETE   return (nwritten); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /************************************************* REMOTE_READ_INFERIOR_MEMORY */
-/* OBSOLETE ** Read LEN bytes from inferior memory at MEMADDR.  Put the result */
-/* OBSOLETE    at debugger address MYADDR.  Returns number of bytes read.  */ */
-/* OBSOLETE static int */
-/* OBSOLETE mm_read_inferior_memory (CORE_ADDR memaddr, char *myaddr, int len) */
-/* OBSOLETE { */
-/* OBSOLETE   int i, nread; */
-/* OBSOLETE  */
-/* OBSOLETE   out_msg_buf->read_req_msg.code = READ_REQ; */
-/* OBSOLETE   out_msg_buf->read_req_msg.memory_space = mm_memory_space (memaddr); */
-/* OBSOLETE  */
-/* OBSOLETE   nread = 0; */
-/* OBSOLETE   while (nread < len) */
-/* OBSOLETE     { */
-/* OBSOLETE       int num_to_read = (len - nread); */
-/* OBSOLETE       if (num_to_read > MAXDATA) */
-/* OBSOLETE 	num_to_read = MAXDATA; */
-/* OBSOLETE       out_msg_buf->read_req_msg.byte_count = num_to_read; */
-/* OBSOLETE       out_msg_buf->read_req_msg.length = 3 * 4 + num_to_read; */
-/* OBSOLETE       out_msg_buf->read_req_msg.address = memaddr + nread; */
-/* OBSOLETE       msg_send_serial (out_msg_buf); */
-/* OBSOLETE  */
-/* OBSOLETE       if (expect_msg (READ_ACK, in_msg_buf, 1)) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  for (i = 0; i < in_msg_buf->read_ack_msg.byte_count; i++) */
-/* OBSOLETE 	    myaddr[i + nread] = in_msg_buf->read_ack_msg.data[i]; */
-/* OBSOLETE 	  nread += in_msg_buf->read_ack_msg.byte_count; */
-/* OBSOLETE 	} */
-/* OBSOLETE       else */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  break; */
-/* OBSOLETE 	} */
-/* OBSOLETE     } */
-/* OBSOLETE   return (nread); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* FIXME!  Merge these two.  */ */
-/* OBSOLETE static int */
-/* OBSOLETE mm_xfer_inferior_memory (CORE_ADDR memaddr, char *myaddr, int len, int write, */
-/* OBSOLETE 			 struct mem_attrib *attrib ATTRIBUTE_UNUSED, */
-/* OBSOLETE 			 struct target_ops *target ATTRIBUTE_UNUSED) */
-/* OBSOLETE { */
-/* OBSOLETE  */
-/* OBSOLETE   memaddr = translate_addr (memaddr); */
-/* OBSOLETE  */
-/* OBSOLETE   if (write) */
-/* OBSOLETE     return mm_write_inferior_memory (memaddr, myaddr, len); */
-/* OBSOLETE   else */
-/* OBSOLETE     return mm_read_inferior_memory (memaddr, myaddr, len); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE  */
-/* OBSOLETE /********************************************************** MSG_SEND_SERIAL */
-/* OBSOLETE ** This function is used to send a message over the */
-/* OBSOLETE ** serial line. */
-/* OBSOLETE ** */
-/* OBSOLETE ** If the message is successfully sent, a zero is */
-/* OBSOLETE ** returned.  If the message was not sendable, a -1 */
-/* OBSOLETE ** is returned.  This function blocks.  That is, it */
-/* OBSOLETE ** does not return until the message is completely */
-/* OBSOLETE ** sent, or until an error is encountered. */
-/* OBSOLETE ** */
-/* OBSOLETE */ */
-/* OBSOLETE  */
-/* OBSOLETE int */
-/* OBSOLETE msg_send_serial (union msg_t *msg_ptr) */
-/* OBSOLETE { */
-/* OBSOLETE   INT32 message_size; */
-/* OBSOLETE   int byte_count; */
-/* OBSOLETE   int result; */
-/* OBSOLETE   char c; */
-/* OBSOLETE  */
-/* OBSOLETE   /* Send message header */ */
-/* OBSOLETE   byte_count = 0; */
-/* OBSOLETE   message_size = msg_ptr->generic_msg.length + (2 * sizeof (INT32)); */
-/* OBSOLETE   do */
-/* OBSOLETE     { */
-/* OBSOLETE       c = *((char *) msg_ptr + byte_count); */
-/* OBSOLETE       result = write (mm_desc, &c, 1); */
-/* OBSOLETE       if (result == 1) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  byte_count = byte_count + 1; */
-/* OBSOLETE 	} */
-/* OBSOLETE     } */
-/* OBSOLETE   while ((byte_count < message_size)); */
-/* OBSOLETE  */
-/* OBSOLETE   return (0); */
-/* OBSOLETE }				/* end msg_send_serial() */ */
-/* OBSOLETE  */
-/* OBSOLETE /********************************************************** MSG_RECV_SERIAL */
-/* OBSOLETE ** This function is used to receive a message over a */
-/* OBSOLETE ** serial line. */
-/* OBSOLETE ** */
-/* OBSOLETE ** If the message is waiting in the buffer, a zero is */
-/* OBSOLETE ** returned and the buffer pointed to by msg_ptr is filled */
-/* OBSOLETE ** in.  If no message was available, a -1 is returned. */
-/* OBSOLETE ** If timeout==0, wait indefinetly for a character. */
-/* OBSOLETE ** */
-/* OBSOLETE */ */
-/* OBSOLETE  */
-/* OBSOLETE int */
-/* OBSOLETE msg_recv_serial (union msg_t *msg_ptr) */
-/* OBSOLETE { */
-/* OBSOLETE   static INT32 length = 0; */
-/* OBSOLETE   static INT32 byte_count = 0; */
-/* OBSOLETE   int result; */
-/* OBSOLETE   char c; */
-/* OBSOLETE   if (msg_ptr == 0)		/* re-sync request */ */
-/* OBSOLETE     { */
-/* OBSOLETE       length = 0; */
-/* OBSOLETE       byte_count = 0; */
-/* OBSOLETE #ifdef HAVE_TERMIO */
-/* OBSOLETE       /* The timeout here is the prevailing timeout set with VTIME */ */
-/* OBSOLETE       ->"timeout==0 semantics not supported" */
-/* OBSOLETE 	read (mm_desc, in_buf, BUFER_SIZE); */
-/* OBSOLETE #else */
-/* OBSOLETE       alarm (1); */
-/* OBSOLETE       read (mm_desc, in_buf, BUFER_SIZE); */
-/* OBSOLETE       alarm (0); */
-/* OBSOLETE #endif */
-/* OBSOLETE       return (0); */
-/* OBSOLETE     } */
-/* OBSOLETE   /* Receive message */ */
-/* OBSOLETE #ifdef HAVE_TERMIO */
-/* OBSOLETE /* Timeout==0, help support the mm_wait() routine */ */
-/* OBSOLETE   ->"timeout==0 semantics not supported (and its nice if they are)" */
-/* OBSOLETE     result = read (mm_desc, &c, 1); */
-/* OBSOLETE #else */
-/* OBSOLETE   alarm (timeout); */
-/* OBSOLETE   result = read (mm_desc, &c, 1); */
-/* OBSOLETE   alarm (0); */
-/* OBSOLETE #endif */
-/* OBSOLETE   if (result < 0) */
-/* OBSOLETE     { */
-/* OBSOLETE       if (errno == EINTR) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  error ("Timeout reading from remote system."); */
-/* OBSOLETE 	} */
-/* OBSOLETE       else */
-/* OBSOLETE 	perror_with_name ("remote"); */
-/* OBSOLETE     } */
-/* OBSOLETE   else if (result == 1) */
-/* OBSOLETE     { */
-/* OBSOLETE       *((char *) msg_ptr + byte_count) = c; */
-/* OBSOLETE       byte_count = byte_count + 1; */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   /* Message header received.  Save message length. */ */
-/* OBSOLETE   if (byte_count == (2 * sizeof (INT32))) */
-/* OBSOLETE     length = msg_ptr->generic_msg.length; */
-/* OBSOLETE  */
-/* OBSOLETE   if (byte_count >= (length + (2 * sizeof (INT32)))) */
-/* OBSOLETE     { */
-/* OBSOLETE       /* Message received */ */
-/* OBSOLETE       byte_count = 0; */
-/* OBSOLETE       return (0); */
-/* OBSOLETE     } */
-/* OBSOLETE   else */
-/* OBSOLETE     return (-1); */
-/* OBSOLETE  */
-/* OBSOLETE }				/* end msg_recv_serial() */ */
-/* OBSOLETE  */
-/* OBSOLETE /********************************************************************* KBD_RAW */
-/* OBSOLETE ** This function is used to put the keyboard in "raw" */
-/* OBSOLETE ** mode for BSD Unix.  The original status is saved */
-/* OBSOLETE ** so that it may be restored later. */
-/* OBSOLETE */ */
-/* OBSOLETE TERMINAL kbd_tbuf; */
-/* OBSOLETE  */
-/* OBSOLETE int */
-/* OBSOLETE kbd_raw (void) */
-/* OBSOLETE { */
-/* OBSOLETE   int result; */
-/* OBSOLETE   TERMINAL tbuf; */
-/* OBSOLETE  */
-/* OBSOLETE   /* Get keyboard termio (to save to restore original modes) */ */
-/* OBSOLETE #ifdef HAVE_TERMIO */
-/* OBSOLETE   result = ioctl (0, TCGETA, &kbd_tbuf); */
-/* OBSOLETE #else */
-/* OBSOLETE   result = ioctl (0, TIOCGETP, &kbd_tbuf); */
-/* OBSOLETE #endif */
-/* OBSOLETE   if (result == -1) */
-/* OBSOLETE     return (errno); */
-/* OBSOLETE  */
-/* OBSOLETE   /* Get keyboard TERMINAL (for modification) */ */
-/* OBSOLETE #ifdef HAVE_TERMIO */
-/* OBSOLETE   result = ioctl (0, TCGETA, &tbuf); */
-/* OBSOLETE #else */
-/* OBSOLETE   result = ioctl (0, TIOCGETP, &tbuf); */
-/* OBSOLETE #endif */
-/* OBSOLETE   if (result == -1) */
-/* OBSOLETE     return (errno); */
-/* OBSOLETE  */
-/* OBSOLETE   /* Set up new parameters */ */
-/* OBSOLETE #ifdef HAVE_TERMIO */
-/* OBSOLETE   tbuf.c_iflag = tbuf.c_iflag & */
-/* OBSOLETE     ~(INLCR | ICRNL | IUCLC | ISTRIP | IXON | BRKINT); */
-/* OBSOLETE   tbuf.c_lflag = tbuf.c_lflag & ~(ICANON | ISIG | ECHO); */
-/* OBSOLETE   tbuf.c_cc[4] = 0;		/* MIN */ */
-/* OBSOLETE   tbuf.c_cc[5] = 0;		/* TIME */ */
-/* OBSOLETE #else */
-/* OBSOLETE   /* FIXME: not sure if this is correct (matches HAVE_TERMIO). */ */
-/* OBSOLETE   tbuf.sg_flags |= RAW; */
-/* OBSOLETE   tbuf.sg_flags |= ANYP; */
-/* OBSOLETE   tbuf.sg_flags &= ~ECHO; */
-/* OBSOLETE #endif */
-/* OBSOLETE  */
-/* OBSOLETE   /* Set keyboard termio to new mode (RAW) */ */
-/* OBSOLETE #ifdef HAVE_TERMIO */
-/* OBSOLETE   result = ioctl (0, TCSETAF, &tbuf); */
-/* OBSOLETE #else */
-/* OBSOLETE   result = ioctl (0, TIOCSETP, &tbuf); */
-/* OBSOLETE #endif */
-/* OBSOLETE   if (result == -1) */
-/* OBSOLETE     return (errno); */
-/* OBSOLETE  */
-/* OBSOLETE   return (0); */
-/* OBSOLETE }				/* end kbd_raw() */ */
-/* OBSOLETE  */
-/* OBSOLETE  */
-/* OBSOLETE  */
-/* OBSOLETE /***************************************************************** KBD_RESTORE */
-/* OBSOLETE ** This function is used to put the keyboard back in the */
-/* OBSOLETE ** mode it was in before kbk_raw was called.  Note that */
-/* OBSOLETE ** kbk_raw() must have been called at least once before */
-/* OBSOLETE ** kbd_restore() is called. */
-/* OBSOLETE */ */
-/* OBSOLETE  */
-/* OBSOLETE int */
-/* OBSOLETE kbd_restore (void) */
-/* OBSOLETE { */
-/* OBSOLETE   int result; */
-/* OBSOLETE  */
-/* OBSOLETE   /* Set keyboard termio to original mode */ */
-/* OBSOLETE #ifdef HAVE_TERMIO */
-/* OBSOLETE   result = ioctl (0, TCSETAF, &kbd_tbuf); */
-/* OBSOLETE #else */
-/* OBSOLETE   result = ioctl (0, TIOCGETP, &kbd_tbuf); */
-/* OBSOLETE #endif */
-/* OBSOLETE  */
-/* OBSOLETE   if (result == -1) */
-/* OBSOLETE     return (errno); */
-/* OBSOLETE  */
-/* OBSOLETE   return (0); */
-/* OBSOLETE }				/* end kbd_cooked() */ */
-/* OBSOLETE  */
-/* OBSOLETE  */
-/* OBSOLETE /*****************************************************************************/ */
-/* OBSOLETE /* Fetch a single register indicatated by 'regno'.  */
-/* OBSOLETE  * Returns 0/-1 on success/failure.   */
-/* OBSOLETE  */ */
-/* OBSOLETE static int */
-/* OBSOLETE fetch_register (int regno) */
-/* OBSOLETE { */
-/* OBSOLETE   int result; */
-/* OBSOLETE   out_msg_buf->read_req_msg.code = READ_REQ; */
-/* OBSOLETE   out_msg_buf->read_req_msg.length = 4 * 3; */
-/* OBSOLETE   out_msg_buf->read_req_msg.byte_count = 4; */
-/* OBSOLETE  */
-/* OBSOLETE   if (regno == GR1_REGNUM) */
-/* OBSOLETE     { */
-/* OBSOLETE       out_msg_buf->read_req_msg.memory_space = GLOBAL_REG; */
-/* OBSOLETE       out_msg_buf->read_req_msg.address = 1; */
-/* OBSOLETE     } */
-/* OBSOLETE   else if (regno >= GR96_REGNUM && regno < GR96_REGNUM + 32) */
-/* OBSOLETE     { */
-/* OBSOLETE       out_msg_buf->read_req_msg.memory_space = GLOBAL_REG; */
-/* OBSOLETE       out_msg_buf->read_req_msg.address = (regno - GR96_REGNUM) + 96; */
-/* OBSOLETE     } */
-/* OBSOLETE #if defined(GR64_REGNUM) */
-/* OBSOLETE   else if (regno >= GR64_REGNUM && regno < GR64_REGNUM + 32) */
-/* OBSOLETE     { */
-/* OBSOLETE       out_msg_buf->read_req_msg.memory_space = GLOBAL_REG; */
-/* OBSOLETE       out_msg_buf->read_req_msg.address = (regno - GR64_REGNUM) + 64; */
-/* OBSOLETE     } */
-/* OBSOLETE #endif /* GR64_REGNUM */ */
-/* OBSOLETE   else if (regno >= LR0_REGNUM && regno < LR0_REGNUM + 128) */
-/* OBSOLETE     { */
-/* OBSOLETE       out_msg_buf->read_req_msg.memory_space = LOCAL_REG; */
-/* OBSOLETE       out_msg_buf->read_req_msg.address = (regno - LR0_REGNUM); */
-/* OBSOLETE     } */
-/* OBSOLETE   else if (regno >= FPE_REGNUM && regno <= EXO_REGNUM) */
-/* OBSOLETE     { */
-/* OBSOLETE       int val = -1; */
-/* OBSOLETE       supply_register (160 + (regno - FPE_REGNUM), &val); */
-/* OBSOLETE       return 0;			/* Pretend Success */ */
-/* OBSOLETE     } */
-/* OBSOLETE   else */
-/* OBSOLETE     { */
-/* OBSOLETE       out_msg_buf->read_req_msg.memory_space = SPECIAL_REG; */
-/* OBSOLETE       out_msg_buf->read_req_msg.address = regnum_to_srnum (regno); */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   msg_send_serial (out_msg_buf); */
-/* OBSOLETE  */
-/* OBSOLETE   if (expect_msg (READ_ACK, in_msg_buf, 1)) */
-/* OBSOLETE     { */
-/* OBSOLETE       supply_register (regno, &(in_msg_buf->read_r_ack_msg.data[0])); */
-/* OBSOLETE       result = 0; */
-/* OBSOLETE     } */
-/* OBSOLETE   else */
-/* OBSOLETE     { */
-/* OBSOLETE       result = -1; */
-/* OBSOLETE     } */
-/* OBSOLETE   return result; */
-/* OBSOLETE } */
-/* OBSOLETE /*****************************************************************************/ */
-/* OBSOLETE /* Store a single register indicated by 'regno'.  */
-/* OBSOLETE  * Returns 0/-1 on success/failure.   */
-/* OBSOLETE  */ */
-/* OBSOLETE static int */
-/* OBSOLETE store_register (int regno) */
-/* OBSOLETE { */
-/* OBSOLETE   int result; */
-/* OBSOLETE  */
-/* OBSOLETE   out_msg_buf->write_req_msg.code = WRITE_REQ; */
-/* OBSOLETE   out_msg_buf->write_req_msg.length = 4 * 4; */
-/* OBSOLETE   out_msg_buf->write_req_msg.byte_count = 4; */
-/* OBSOLETE   out_msg_buf->write_r_msg.data[0] = read_register (regno); */
-/* OBSOLETE  */
-/* OBSOLETE   if (regno == GR1_REGNUM) */
-/* OBSOLETE     { */
-/* OBSOLETE       out_msg_buf->write_req_msg.memory_space = GLOBAL_REG; */
-/* OBSOLETE       out_msg_buf->write_req_msg.address = 1; */
-/* OBSOLETE       /* Setting GR1 changes the numbers of all the locals, so invalidate the  */
-/* OBSOLETE        * register cache.  Do this *after* calling read_register, because we want  */
-/* OBSOLETE        * read_register to return the value that write_register has just stuffed  */
-/* OBSOLETE        * into the registers array, not the value of the register fetched from  */
-/* OBSOLETE        * the inferior.   */
-/* OBSOLETE        */ */
-/* OBSOLETE       registers_changed (); */
-/* OBSOLETE     } */
-/* OBSOLETE #if defined(GR64_REGNUM) */
-/* OBSOLETE   else if (regno >= GR64_REGNUM && regno < GR64_REGNUM + 32) */
-/* OBSOLETE     { */
-/* OBSOLETE       out_msg_buf->write_req_msg.memory_space = GLOBAL_REG; */
-/* OBSOLETE       out_msg_buf->write_req_msg.address = (regno - GR64_REGNUM) + 64; */
-/* OBSOLETE     } */
-/* OBSOLETE #endif /* GR64_REGNUM */ */
-/* OBSOLETE   else if (regno >= GR96_REGNUM && regno < GR96_REGNUM + 32) */
-/* OBSOLETE     { */
-/* OBSOLETE       out_msg_buf->write_req_msg.memory_space = GLOBAL_REG; */
-/* OBSOLETE       out_msg_buf->write_req_msg.address = (regno - GR96_REGNUM) + 96; */
-/* OBSOLETE     } */
-/* OBSOLETE   else if (regno >= LR0_REGNUM && regno < LR0_REGNUM + 128) */
-/* OBSOLETE     { */
-/* OBSOLETE       out_msg_buf->write_req_msg.memory_space = LOCAL_REG; */
-/* OBSOLETE       out_msg_buf->write_req_msg.address = (regno - LR0_REGNUM); */
-/* OBSOLETE     } */
-/* OBSOLETE   else if (regno >= FPE_REGNUM && regno <= EXO_REGNUM) */
-/* OBSOLETE     { */
-/* OBSOLETE       return 0;			/* Pretend Success */ */
-/* OBSOLETE     } */
-/* OBSOLETE   else */
-/* OBSOLETE     /* An unprotected or protected special register */ */
-/* OBSOLETE     { */
-/* OBSOLETE       out_msg_buf->write_req_msg.memory_space = SPECIAL_REG; */
-/* OBSOLETE       out_msg_buf->write_req_msg.address = regnum_to_srnum (regno); */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   msg_send_serial (out_msg_buf); */
-/* OBSOLETE  */
-/* OBSOLETE   if (expect_msg (WRITE_ACK, in_msg_buf, 1)) */
-/* OBSOLETE     { */
-/* OBSOLETE       result = 0; */
-/* OBSOLETE     } */
-/* OBSOLETE   else */
-/* OBSOLETE     { */
-/* OBSOLETE       result = -1; */
-/* OBSOLETE     } */
-/* OBSOLETE   return result; */
-/* OBSOLETE } */
-/* OBSOLETE /****************************************************************************/ */
-/* OBSOLETE /*  */
-/* OBSOLETE  * Convert a gdb special register number to a 29000 special register number. */
-/* OBSOLETE  */ */
-/* OBSOLETE static int */
-/* OBSOLETE regnum_to_srnum (int regno) */
-/* OBSOLETE { */
-/* OBSOLETE   switch (regno) */
-/* OBSOLETE     { */
-/* OBSOLETE     case VAB_REGNUM: */
-/* OBSOLETE       return (0); */
-/* OBSOLETE     case OPS_REGNUM: */
-/* OBSOLETE       return (1); */
-/* OBSOLETE     case CPS_REGNUM: */
-/* OBSOLETE       return (2); */
-/* OBSOLETE     case CFG_REGNUM: */
-/* OBSOLETE       return (3); */
-/* OBSOLETE     case CHA_REGNUM: */
-/* OBSOLETE       return (4); */
-/* OBSOLETE     case CHD_REGNUM: */
-/* OBSOLETE       return (5); */
-/* OBSOLETE     case CHC_REGNUM: */
-/* OBSOLETE       return (6); */
-/* OBSOLETE     case RBP_REGNUM: */
-/* OBSOLETE       return (7); */
-/* OBSOLETE     case TMC_REGNUM: */
-/* OBSOLETE       return (8); */
-/* OBSOLETE     case TMR_REGNUM: */
-/* OBSOLETE       return (9); */
-/* OBSOLETE     case NPC_REGNUM: */
-/* OBSOLETE       return (USE_SHADOW_PC ? (20) : (10)); */
-/* OBSOLETE     case PC_REGNUM: */
-/* OBSOLETE       return (USE_SHADOW_PC ? (21) : (11)); */
-/* OBSOLETE     case PC2_REGNUM: */
-/* OBSOLETE       return (USE_SHADOW_PC ? (22) : (12)); */
-/* OBSOLETE     case MMU_REGNUM: */
-/* OBSOLETE       return (13); */
-/* OBSOLETE     case LRU_REGNUM: */
-/* OBSOLETE       return (14); */
-/* OBSOLETE     case IPC_REGNUM: */
-/* OBSOLETE       return (128); */
-/* OBSOLETE     case IPA_REGNUM: */
-/* OBSOLETE       return (129); */
-/* OBSOLETE     case IPB_REGNUM: */
-/* OBSOLETE       return (130); */
-/* OBSOLETE     case Q_REGNUM: */
-/* OBSOLETE       return (131); */
-/* OBSOLETE     case ALU_REGNUM: */
-/* OBSOLETE       return (132); */
-/* OBSOLETE     case BP_REGNUM: */
-/* OBSOLETE       return (133); */
-/* OBSOLETE     case FC_REGNUM: */
-/* OBSOLETE       return (134); */
-/* OBSOLETE     case CR_REGNUM: */
-/* OBSOLETE       return (135); */
-/* OBSOLETE     case FPE_REGNUM: */
-/* OBSOLETE       return (160); */
-/* OBSOLETE     case INTE_REGNUM: */
-/* OBSOLETE       return (161); */
-/* OBSOLETE     case FPS_REGNUM: */
-/* OBSOLETE       return (162); */
-/* OBSOLETE     case EXO_REGNUM: */
-/* OBSOLETE       return (164); */
-/* OBSOLETE     default: */
-/* OBSOLETE       return (255);		/* Failure ? */ */
-/* OBSOLETE     } */
-/* OBSOLETE } */
-/* OBSOLETE /****************************************************************************/ */
-/* OBSOLETE /*  */
-/* OBSOLETE  * Initialize the target debugger (minimon only). */
-/* OBSOLETE  */ */
-/* OBSOLETE static void */
-/* OBSOLETE init_target_mm (ADDR32 tstart, ADDR32 tend, ADDR32 dstart, ADDR32 dend, */
-/* OBSOLETE 		ADDR32 entry, INT32 ms_size, INT32 rs_size, ADDR32 arg_start) */
-/* OBSOLETE { */
-/* OBSOLETE   out_msg_buf->init_msg.code = INIT; */
-/* OBSOLETE   out_msg_buf->init_msg.length = sizeof (struct init_msg_t) - 2 * sizeof (INT32); */
-/* OBSOLETE   out_msg_buf->init_msg.text_start = tstart; */
-/* OBSOLETE   out_msg_buf->init_msg.text_end = tend; */
-/* OBSOLETE   out_msg_buf->init_msg.data_start = dstart; */
-/* OBSOLETE   out_msg_buf->init_msg.data_end = dend; */
-/* OBSOLETE   out_msg_buf->init_msg.entry_point = entry; */
-/* OBSOLETE   out_msg_buf->init_msg.mem_stack_size = ms_size; */
-/* OBSOLETE   out_msg_buf->init_msg.reg_stack_size = rs_size; */
-/* OBSOLETE   out_msg_buf->init_msg.arg_start = arg_start; */
-/* OBSOLETE   msg_send_serial (out_msg_buf); */
-/* OBSOLETE   expect_msg (INIT_ACK, in_msg_buf, 1); */
-/* OBSOLETE } */
-/* OBSOLETE /****************************************************************************/ */
-/* OBSOLETE /*  */
-/* OBSOLETE  * Return a pointer to a string representing the given message code. */
-/* OBSOLETE  * Not all messages are represented here, only the ones that we expect */
-/* OBSOLETE  * to be called with. */
-/* OBSOLETE  */ */
-/* OBSOLETE static char * */
-/* OBSOLETE msg_str (INT32 code) */
-/* OBSOLETE { */
-/* OBSOLETE   static char cbuf[32]; */
-/* OBSOLETE  */
-/* OBSOLETE   switch (code) */
-/* OBSOLETE     { */
-/* OBSOLETE     case BKPT_SET_ACK: */
-/* OBSOLETE       sprintf (cbuf, "%s (%d)", "BKPT_SET_ACK", code); */
-/* OBSOLETE       break; */
-/* OBSOLETE     case BKPT_RM_ACK: */
-/* OBSOLETE       sprintf (cbuf, "%s (%d)", "BKPT_RM_ACK", code); */
-/* OBSOLETE       break; */
-/* OBSOLETE     case INIT_ACK: */
-/* OBSOLETE       sprintf (cbuf, "%s (%d)", "INIT_ACK", code); */
-/* OBSOLETE       break; */
-/* OBSOLETE     case READ_ACK: */
-/* OBSOLETE       sprintf (cbuf, "%s (%d)", "READ_ACK", code); */
-/* OBSOLETE       break; */
-/* OBSOLETE     case WRITE_ACK: */
-/* OBSOLETE       sprintf (cbuf, "%s (%d)", "WRITE_ACK", code); */
-/* OBSOLETE       break; */
-/* OBSOLETE     case ERROR: */
-/* OBSOLETE       sprintf (cbuf, "%s (%d)", "ERROR", code); */
-/* OBSOLETE       break; */
-/* OBSOLETE     case HALT: */
-/* OBSOLETE       sprintf (cbuf, "%s (%d)", "HALT", code); */
-/* OBSOLETE       break; */
-/* OBSOLETE     default: */
-/* OBSOLETE       sprintf (cbuf, "UNKNOWN (%d)", code); */
-/* OBSOLETE       break; */
-/* OBSOLETE     } */
-/* OBSOLETE   return (cbuf); */
-/* OBSOLETE } */
-/* OBSOLETE /****************************************************************************/ */
-/* OBSOLETE /* */
-/* OBSOLETE  * Selected (not all of them) error codes that we might get. */
-/* OBSOLETE  */ */
-/* OBSOLETE static char * */
-/* OBSOLETE error_msg_str (INT32 code) */
-/* OBSOLETE { */
-/* OBSOLETE   static char cbuf[50]; */
-/* OBSOLETE  */
-/* OBSOLETE   switch (code) */
-/* OBSOLETE     { */
-/* OBSOLETE     case EMFAIL: */
-/* OBSOLETE       return ("EMFAIL: unrecoverable error"); */
-/* OBSOLETE     case EMBADADDR: */
-/* OBSOLETE       return ("EMBADADDR: Illegal address"); */
-/* OBSOLETE     case EMBADREG: */
-/* OBSOLETE       return ("EMBADREG: Illegal register "); */
-/* OBSOLETE     case EMACCESS: */
-/* OBSOLETE       return ("EMACCESS: Could not access memory"); */
-/* OBSOLETE     case EMBADMSG: */
-/* OBSOLETE       return ("EMBADMSG: Unknown message type"); */
-/* OBSOLETE     case EMMSG2BIG: */
-/* OBSOLETE       return ("EMMSG2BIG: Message to large"); */
-/* OBSOLETE     case EMNOSEND: */
-/* OBSOLETE       return ("EMNOSEND: Could not send message"); */
-/* OBSOLETE     case EMNORECV: */
-/* OBSOLETE       return ("EMNORECV: Could not recv message"); */
-/* OBSOLETE     case EMRESET: */
-/* OBSOLETE       return ("EMRESET: Could not RESET target"); */
-/* OBSOLETE     case EMCONFIG: */
-/* OBSOLETE       return ("EMCONFIG: Could not get target CONFIG"); */
-/* OBSOLETE     case EMSTATUS: */
-/* OBSOLETE       return ("EMSTATUS: Could not get target STATUS"); */
-/* OBSOLETE     case EMREAD: */
-/* OBSOLETE       return ("EMREAD: Could not READ target memory"); */
-/* OBSOLETE     case EMWRITE: */
-/* OBSOLETE       return ("EMWRITE: Could not WRITE target memory"); */
-/* OBSOLETE     case EMBKPTSET: */
-/* OBSOLETE       return ("EMBKPTSET: Could not set breakpoint"); */
-/* OBSOLETE     case EMBKPTRM: */
-/* OBSOLETE       return ("EMBKPTRM: Could not remove breakpoint"); */
-/* OBSOLETE     case EMBKPTSTAT: */
-/* OBSOLETE       return ("EMBKPTSTAT: Could not get breakpoint status"); */
-/* OBSOLETE     case EMBKPTNONE: */
-/* OBSOLETE       return ("EMBKPTNONE: All breakpoints in use"); */
-/* OBSOLETE     case EMBKPTUSED: */
-/* OBSOLETE       return ("EMBKPTUSED: Breakpoints already in use"); */
-/* OBSOLETE     case EMINIT: */
-/* OBSOLETE       return ("EMINIT: Could not init target memory"); */
-/* OBSOLETE     case EMGO: */
-/* OBSOLETE       return ("EMGO: Could not start execution"); */
-/* OBSOLETE     case EMSTEP: */
-/* OBSOLETE       return ("EMSTEP: Could not single step"); */
-/* OBSOLETE     case EMBREAK: */
-/* OBSOLETE       return ("EMBREAK: Could not BREAK"); */
-/* OBSOLETE     case EMCOMMERR: */
-/* OBSOLETE       return ("EMCOMMERR: Communication error"); */
-/* OBSOLETE     default: */
-/* OBSOLETE       sprintf (cbuf, "error number %d", code); */
-/* OBSOLETE       break; */
-/* OBSOLETE     }				/* end switch */ */
-/* OBSOLETE  */
-/* OBSOLETE   return (cbuf); */
-/* OBSOLETE } */
-/* OBSOLETE /****************************************************************************/ */
-/* OBSOLETE  */
-/* OBSOLETE /* Receive a message, placing it in MSG_BUF, and expect it to be of */
-/* OBSOLETE    type MSGCODE.  If an error occurs, a non-zero FROM_TTY indicates */
-/* OBSOLETE    that the message should be printed. */
-/* OBSOLETE     */
-/* OBSOLETE    Return 0 for failure, 1 for success.  */ */
-/* OBSOLETE  */
-/* OBSOLETE static int */
-/* OBSOLETE expect_msg (INT32 msgcode, union msg_t *msg_buf, int from_tty) */
-/* OBSOLETE { */
-/* OBSOLETE   int retries = 0; */
-/* OBSOLETE   while (msg_recv_serial (msg_buf) && (retries++ < MAX_RETRIES)); */
-/* OBSOLETE   if (retries >= MAX_RETRIES) */
-/* OBSOLETE     { */
-/* OBSOLETE       printf ("Expected msg %s, ", msg_str (msgcode)); */
-/* OBSOLETE       printf ("no message received!\n"); */
-/* OBSOLETE       return (0);		/* Failure */ */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   if (msg_buf->generic_msg.code != msgcode) */
-/* OBSOLETE     { */
-/* OBSOLETE       if (from_tty) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  printf ("Expected msg %s, ", msg_str (msgcode)); */
-/* OBSOLETE 	  printf ("got msg %s\n", msg_str (msg_buf->generic_msg.code)); */
-/* OBSOLETE 	  if (msg_buf->generic_msg.code == ERROR) */
-/* OBSOLETE 	    printf ("%s\n", error_msg_str (msg_buf->error_msg.error_code)); */
-/* OBSOLETE 	} */
-/* OBSOLETE       return (0);		/* Failure */ */
-/* OBSOLETE     } */
-/* OBSOLETE   return (1);			/* Success */ */
-/* OBSOLETE } */
-/* OBSOLETE /****************************************************************************/ */
-/* OBSOLETE /* */
-/* OBSOLETE  * Determine the MiniMon memory space qualifier based on the addr.  */
-/* OBSOLETE  * FIXME: Can't distinguis I_ROM/D_ROM.   */
-/* OBSOLETE  * FIXME: Doesn't know anything about I_CACHE/D_CACHE. */
-/* OBSOLETE  */ */
-/* OBSOLETE static int */
-/* OBSOLETE mm_memory_space (CORE_ADDR *addr) */
-/* OBSOLETE { */
-/* OBSOLETE   ADDR32 tstart = target_config.I_mem_start; */
-/* OBSOLETE   ADDR32 tend = tstart + target_config.I_mem_size; */
-/* OBSOLETE   ADDR32 dstart = target_config.D_mem_start; */
-/* OBSOLETE   ADDR32 dend = tstart + target_config.D_mem_size; */
-/* OBSOLETE   ADDR32 rstart = target_config.ROM_start; */
-/* OBSOLETE   ADDR32 rend = tstart + target_config.ROM_size; */
-/* OBSOLETE  */
-/* OBSOLETE   if (((ADDR32) addr >= tstart) && ((ADDR32) addr < tend)) */
-/* OBSOLETE     { */
-/* OBSOLETE       return I_MEM; */
-/* OBSOLETE     } */
-/* OBSOLETE   else if (((ADDR32) addr >= dstart) && ((ADDR32) addr < dend)) */
-/* OBSOLETE     { */
-/* OBSOLETE       return D_MEM; */
-/* OBSOLETE     } */
-/* OBSOLETE   else if (((ADDR32) addr >= rstart) && ((ADDR32) addr < rend)) */
-/* OBSOLETE     { */
-/* OBSOLETE       /* FIXME: how do we determine between D_ROM and I_ROM */ */
-/* OBSOLETE       return D_ROM; */
-/* OBSOLETE     } */
-/* OBSOLETE   else				/* FIXME: what do me do now? */ */
-/* OBSOLETE     return D_MEM;		/* Hmmm! */ */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /****************************************************************************/ */
-/* OBSOLETE /*  */
-/* OBSOLETE  *  Define the target subroutine names */
-/* OBSOLETE  */ */
-/* OBSOLETE struct target_ops mm_ops; */
-/* OBSOLETE  */
-/* OBSOLETE static void */
-/* OBSOLETE init_mm_ops (void) */
-/* OBSOLETE { */
-/* OBSOLETE   mm_ops.to_shortname = "minimon"; */
-/* OBSOLETE   mm_ops.to_longname = "Remote AMD/Minimon target"; */
-/* OBSOLETE   mm_ops.to_doc = "Remote debug an AMD 290*0 using the MiniMon dbg core on the target"; */
-/* OBSOLETE   mm_ops.to_open = mm_open; */
-/* OBSOLETE   mm_ops.to_close = mm_close; */
-/* OBSOLETE   mm_ops.to_attach = mm_attach; */
-/* OBSOLETE   mm_ops.to_post_attach = NULL; */
-/* OBSOLETE   mm_ops.to_require_attach = NULL; */
-/* OBSOLETE   mm_ops.to_detach = mm_detach; */
-/* OBSOLETE   mm_ops.to_require_detach = NULL; */
-/* OBSOLETE   mm_ops.to_resume = mm_resume; */
-/* OBSOLETE   mm_ops.to_wait = mm_wait; */
-/* OBSOLETE   mm_ops.to_post_wait = NULL; */
-/* OBSOLETE   mm_ops.to_fetch_registers = mm_fetch_registers; */
-/* OBSOLETE   mm_ops.to_store_registers = mm_store_registers; */
-/* OBSOLETE   mm_ops.to_prepare_to_store = mm_prepare_to_store; */
-/* OBSOLETE   mm_ops.to_xfer_memory = mm_xfer_inferior_memory; */
-/* OBSOLETE   mm_ops.to_files_info = mm_files_info; */
-/* OBSOLETE   mm_ops.to_insert_breakpoint = mm_insert_breakpoint; */
-/* OBSOLETE   mm_ops.to_remove_breakpoint = mm_remove_breakpoint; */
-/* OBSOLETE   mm_ops.to_terminal_init = 0; */
-/* OBSOLETE   mm_ops.to_terminal_inferior = 0; */
-/* OBSOLETE   mm_ops.to_terminal_ours_for_output = 0; */
-/* OBSOLETE   mm_ops.to_terminal_ours = 0; */
-/* OBSOLETE   mm_ops.to_terminal_info = 0; */
-/* OBSOLETE   mm_ops.to_kill = mm_kill; */
-/* OBSOLETE   mm_ops.to_load = mm_load; */
-/* OBSOLETE   mm_ops.to_lookup_symbol = 0; */
-/* OBSOLETE   mm_ops.to_create_inferior = mm_create_inferior; */
-/* OBSOLETE   mm_ops.to_post_startup_inferior = NULL; */
-/* OBSOLETE   mm_ops.to_acknowledge_created_inferior = NULL; */
-/* OBSOLETE   mm_ops.to_clone_and_follow_inferior = NULL; */
-/* OBSOLETE   mm_ops.to_post_follow_inferior_by_clone = NULL; */
-/* OBSOLETE   mm_ops.to_insert_fork_catchpoint = NULL; */
-/* OBSOLETE   mm_ops.to_remove_fork_catchpoint = NULL; */
-/* OBSOLETE   mm_ops.to_insert_vfork_catchpoint = NULL; */
-/* OBSOLETE   mm_ops.to_remove_vfork_catchpoint = NULL; */
-/* OBSOLETE   mm_ops.to_has_forked = NULL; */
-/* OBSOLETE   mm_ops.to_has_vforked = NULL; */
-/* OBSOLETE   mm_ops.to_can_follow_vfork_prior_to_exec = NULL; */
-/* OBSOLETE   mm_ops.to_post_follow_vfork = NULL; */
-/* OBSOLETE   mm_ops.to_insert_exec_catchpoint = NULL; */
-/* OBSOLETE   mm_ops.to_remove_exec_catchpoint = NULL; */
-/* OBSOLETE   mm_ops.to_has_execd = NULL; */
-/* OBSOLETE   mm_ops.to_reported_exec_events_per_exec_call = NULL; */
-/* OBSOLETE   mm_ops.to_has_exited = NULL; */
-/* OBSOLETE   mm_ops.to_mourn_inferior = mm_mourn; */
-/* OBSOLETE   mm_ops.to_can_run = 0; */
-/* OBSOLETE   mm_ops.to_notice_signals = 0; */
-/* OBSOLETE   mm_ops.to_thread_alive = 0; */
-/* OBSOLETE   mm_ops.to_stop = 0; */
-/* OBSOLETE   mm_ops.to_pid_to_exec_file = NULL; */
-/* OBSOLETE   mm_ops.to_stratum = process_stratum; */
-/* OBSOLETE   mm_ops.DONT_USE = 0; */
-/* OBSOLETE   mm_ops.to_has_all_memory = 1; */
-/* OBSOLETE   mm_ops.to_has_memory = 1; */
-/* OBSOLETE   mm_ops.to_has_stack = 1; */
-/* OBSOLETE   mm_ops.to_has_registers = 1; */
-/* OBSOLETE   mm_ops.to_has_execution = 1; */
-/* OBSOLETE   mm_ops.to_sections = 0; */
-/* OBSOLETE   mm_ops.to_sections_end = 0; */
-/* OBSOLETE   mm_ops.to_magic = OPS_MAGIC; */
-/* OBSOLETE }; */
-/* OBSOLETE  */
-/* OBSOLETE void */
-/* OBSOLETE _initialize_remote_mm (void) */
-/* OBSOLETE { */
-/* OBSOLETE   init_mm_ops (); */
-/* OBSOLETE   add_target (&mm_ops); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE #ifdef NO_HIF_SUPPORT */
-/* OBSOLETE service_HIF (union msg_t *msg) */
-/* OBSOLETE { */
-/* OBSOLETE   return (0);			/* Emulate a failure */ */
-/* OBSOLETE } */
-/* OBSOLETE #endif */
diff --git a/gdb/remote-udi.c b/gdb/remote-udi.c
deleted file mode 100644
index f7863a8..0000000
--- a/gdb/remote-udi.c
+++ /dev/null
@@ -1,1722 +0,0 @@
-/* OBSOLETE /* Remote debugging interface for AMD 29k interfaced via UDI, for GDB. */
-/* OBSOLETE    Copyright 1990, 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001 */
-/* OBSOLETE    Free Software Foundation, Inc. */
-/* OBSOLETE    Written by Daniel Mann.  Contributed by AMD. */
-/* OBSOLETE  */
-/* OBSOLETE    This file is part of GDB. */
-/* OBSOLETE  */
-/* OBSOLETE    This program is free software; you can redistribute it and/or modify */
-/* OBSOLETE    it under the terms of the GNU General Public License as published by */
-/* OBSOLETE    the Free Software Foundation; either version 2 of the License, or */
-/* OBSOLETE    (at your option) any later version. */
-/* OBSOLETE  */
-/* OBSOLETE    This program is distributed in the hope that it will be useful, */
-/* OBSOLETE    but WITHOUT ANY WARRANTY; without even the implied warranty of */
-/* OBSOLETE    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the */
-/* OBSOLETE    GNU General Public License for more details. */
-/* OBSOLETE  */
-/* OBSOLETE    You should have received a copy of the GNU General Public License */
-/* OBSOLETE    along with this program; if not, write to the Free Software */
-/* OBSOLETE    Foundation, Inc., 59 Temple Place - Suite 330, */
-/* OBSOLETE    Boston, MA 02111-1307, USA.  */ */
-/* OBSOLETE  */
-/* OBSOLETE /* This is like remote.c but uses the Universal Debug Interface (UDI) to  */
-/* OBSOLETE    talk to the target hardware (or simulator).  UDI is a TCP/IP based */
-/* OBSOLETE    protocol; for hardware that doesn't run TCP, an interface adapter  */
-/* OBSOLETE    daemon talks UDI on one side, and talks to the hardware (typically */
-/* OBSOLETE    over a serial port) on the other side. */
-/* OBSOLETE  */
-/* OBSOLETE    - Originally written by Daniel Mann at AMD for MiniMON and gdb 3.91.6. */
-/* OBSOLETE    - David Wood (wood@lab.ultra.nyu.edu) at New York University adapted this */
-/* OBSOLETE    file to gdb 3.95.  I was unable to get this working on sun3os4 */
-/* OBSOLETE    with termio, only with sgtty. */
-/* OBSOLETE    - Daniel Mann at AMD took the 3.95 adaptions above and replaced */
-/* OBSOLETE    MiniMON interface with UDI-p interface.        */ */
-/* OBSOLETE  */
-/* OBSOLETE #include "defs.h" */
-/* OBSOLETE #include "frame.h" */
-/* OBSOLETE #include "inferior.h" */
-/* OBSOLETE #include "value.h" */
-/* OBSOLETE #include <ctype.h> */
-/* OBSOLETE #include <fcntl.h> */
-/* OBSOLETE #include <errno.h> */
-/* OBSOLETE #include "gdb_string.h" */
-/* OBSOLETE #include "terminal.h" */
-/* OBSOLETE #include "target.h" */
-/* OBSOLETE #include "29k-share/udi/udiproc.h" */
-/* OBSOLETE #include "gdbcmd.h" */
-/* OBSOLETE #include "bfd.h" */
-/* OBSOLETE #include "gdbcore.h"		/* For download function */ */
-/* OBSOLETE #include "regcache.h" */
-/* OBSOLETE  */
-/* OBSOLETE /* access the register store directly, without going through */
-/* OBSOLETE    the normal handler functions. This avoids an extra data copy.  */ */
-/* OBSOLETE  */
-/* OBSOLETE extern int stop_soon_quietly;	/* for wait_for_inferior */ */
-/* OBSOLETE extern struct value *call_function_by_hand (); */
-/* OBSOLETE static void udi_resume (ptid_t ptid, int step, enum target_signal sig); */
-/* OBSOLETE static void udi_fetch_registers (int regno); */
-/* OBSOLETE static void udi_load (char *args, int from_tty); */
-/* OBSOLETE static void fetch_register (int regno); */
-/* OBSOLETE static void udi_store_registers (int regno); */
-/* OBSOLETE static int store_register (int regno); */
-/* OBSOLETE static int regnum_to_srnum (int regno); */
-/* OBSOLETE static void udi_close (int quitting); */
-/* OBSOLETE static CPUSpace udi_memory_space (CORE_ADDR addr); */
-/* OBSOLETE static int udi_write_inferior_memory (CORE_ADDR memaddr, char *myaddr, */
-/* OBSOLETE 				      int len); */
-/* OBSOLETE static int udi_read_inferior_memory (CORE_ADDR memaddr, char *myaddr, */
-/* OBSOLETE 				     int len); */
-/* OBSOLETE static void download (char *load_arg_string, int from_tty); */
-/* OBSOLETE char CoffFileName[100] = ""; */
-/* OBSOLETE  */
-/* OBSOLETE #define FREEZE_MODE     (read_register(CPS_REGNUM) & 0x400) */
-/* OBSOLETE #define USE_SHADOW_PC	((processor_type == a29k_freeze_mode) && FREEZE_MODE) */
-/* OBSOLETE  */
-/* OBSOLETE static int timeout = 5; */
-/* OBSOLETE extern struct target_ops udi_ops;	/* Forward declaration */ */
-/* OBSOLETE  */
-/* OBSOLETE /* Special register enumeration. */
-/* OBSOLETE  */ */
-/* OBSOLETE  */
-/* OBSOLETE /******************************************************************* UDI DATA*/ */
-/* OBSOLETE #define	MAXDATA		2*1024	/* max UDI[read/write] byte size */ */
-/* OBSOLETE /* Descriptor for I/O to remote machine.  Initialize it to -1 so that */
-/* OBSOLETE    udi_open knows that we don't have a file open when the program */
-/* OBSOLETE    starts.  */ */
-/* OBSOLETE  */
-/* OBSOLETE UDISessionId udi_session_id = -1; */
-/* OBSOLETE static char *udi_config_id; */
-/* OBSOLETE  */
-/* OBSOLETE CPUOffset IMemStart = 0; */
-/* OBSOLETE CPUSizeT IMemSize = 0; */
-/* OBSOLETE CPUOffset DMemStart = 0; */
-/* OBSOLETE CPUSizeT DMemSize = 0; */
-/* OBSOLETE CPUOffset RMemStart = 0; */
-/* OBSOLETE CPUSizeT RMemSize = 0; */
-/* OBSOLETE UDIUInt32 CPUPRL; */
-/* OBSOLETE UDIUInt32 CoProcPRL; */
-/* OBSOLETE  */
-/* OBSOLETE UDIMemoryRange address_ranges[2];	/* Text and data */ */
-/* OBSOLETE UDIResource entry = */
-/* OBSOLETE {0, 0};				/* Entry point */ */
-/* OBSOLETE CPUSizeT stack_sizes[2];	/* Regular and memory stacks */ */
-/* OBSOLETE  */
-/* OBSOLETE #define	SBUF_MAX	1024	/* maximum size of string handling buffer */ */
-/* OBSOLETE char sbuf[SBUF_MAX]; */
-/* OBSOLETE  */
-/* OBSOLETE typedef struct bkpt_entry_str */
-/* OBSOLETE   { */
-/* OBSOLETE     UDIResource Addr; */
-/* OBSOLETE     UDIUInt32 PassCount; */
-/* OBSOLETE     UDIBreakType Type; */
-/* OBSOLETE     unsigned int BreakId; */
-/* OBSOLETE   } */
-/* OBSOLETE bkpt_entry_t; */
-/* OBSOLETE #define		BKPT_TABLE_SIZE 40 */
-/* OBSOLETE static bkpt_entry_t bkpt_table[BKPT_TABLE_SIZE]; */
-/* OBSOLETE extern char dfe_errmsg[];	/* error string */ */
-/* OBSOLETE  */
-/* OBSOLETE /* malloc'd name of the program on the remote system.  */ */
-/* OBSOLETE static char *prog_name = NULL; */
-/* OBSOLETE  */
-/* OBSOLETE /* This is called not only when we first attach, but also when the */
-/* OBSOLETE    user types "run" after having attached.  */ */
-/* OBSOLETE  */
-/* OBSOLETE static void */
-/* OBSOLETE udi_create_inferior (char *execfile, char *args, char **env) */
-/* OBSOLETE { */
-/* OBSOLETE   char *args1; */
-/* OBSOLETE  */
-/* OBSOLETE   if (execfile) */
-/* OBSOLETE     { */
-/* OBSOLETE       if (prog_name != NULL) */
-/* OBSOLETE 	xfree (prog_name); */
-/* OBSOLETE       prog_name = savestring (execfile, strlen (execfile)); */
-/* OBSOLETE     } */
-/* OBSOLETE   else if (entry.Offset) */
-/* OBSOLETE     execfile = ""; */
-/* OBSOLETE   else */
-/* OBSOLETE     error ("No image loaded into target."); */
-/* OBSOLETE  */
-/* OBSOLETE   if (udi_session_id < 0) */
-/* OBSOLETE     { */
-/* OBSOLETE       /* If the TIP is not open, open it.  */ */
-/* OBSOLETE       if (UDIConnect (udi_config_id, &udi_session_id)) */
-/* OBSOLETE 	error ("UDIConnect() failed: %s\n", dfe_errmsg); */
-/* OBSOLETE       /* We will need to download the program.  */ */
-/* OBSOLETE       entry.Offset = 0; */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   inferior_ptid = pid_to_ptid (40000); */
-/* OBSOLETE  */
-/* OBSOLETE   if (!entry.Offset) */
-/* OBSOLETE     download (execfile, 0); */
-/* OBSOLETE  */
-/* OBSOLETE   args1 = alloca (strlen (execfile) + strlen (args) + 2); */
-/* OBSOLETE  */
-/* OBSOLETE   if (execfile[0] == '\0') */
-/* OBSOLETE  */
-/* OBSOLETE     /* It is empty.  We need to quote it somehow, or else the target */
-/* OBSOLETE        will think there is no argument being passed here.  According */
-/* OBSOLETE        to the UDI spec it is quoted "according to TIP OS rules" which */
-/* OBSOLETE        I guess means quoting it like the Unix shell should work */
-/* OBSOLETE        (sounds pretty bogus to me...).  In fact it doesn't work (with */
-/* OBSOLETE        isstip anyway), but passing in two quotes as the argument seems */
-/* OBSOLETE        like a reasonable enough behavior anyway (I guess).  */ */
-/* OBSOLETE  */
-/* OBSOLETE     strcpy (args1, "''"); */
-/* OBSOLETE   else */
-/* OBSOLETE     strcpy (args1, execfile); */
-/* OBSOLETE   strcat (args1, " "); */
-/* OBSOLETE   strcat (args1, args); */
-/* OBSOLETE  */
-/* OBSOLETE   UDIInitializeProcess (address_ranges,		/* ProcessMemory[] */ */
-/* OBSOLETE 			(UDIInt) 2,	/* NumberOfRanges */ */
-/* OBSOLETE 			entry,	/* EntryPoint */ */
-/* OBSOLETE 			stack_sizes,	/* *StackSizes */ */
-/* OBSOLETE 			(UDIInt) 2,	/* NumberOfStacks */ */
-/* OBSOLETE 			args1);	/* ArgString */ */
-/* OBSOLETE  */
-/* OBSOLETE   init_wait_for_inferior (); */
-/* OBSOLETE   clear_proceed_status (); */
-/* OBSOLETE   proceed (-1, TARGET_SIGNAL_DEFAULT, 0); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE static void */
-/* OBSOLETE udi_mourn (void) */
-/* OBSOLETE { */
-/* OBSOLETE #if 0 */
-/* OBSOLETE   /* Requiring "target udi" each time you run is a major pain.  I suspect */
-/* OBSOLETE      this was just blindy copied from remote.c, in which "target" and */
-/* OBSOLETE      "run" are combined.  Having a udi target without an inferior seems */
-/* OBSOLETE      to work between "target udi" and "run", so why not now?  */ */
-/* OBSOLETE   pop_target ();		/* Pop back to no-child state */ */
-/* OBSOLETE #endif */
-/* OBSOLETE   /* But if we're going to want to run it again, we better remove the */
-/* OBSOLETE      breakpoints...  */ */
-/* OBSOLETE   remove_breakpoints (); */
-/* OBSOLETE   generic_mourn_inferior (); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /******************************************************************** UDI_OPEN */
-/* OBSOLETE ** Open a connection to remote TIP. */
-/* OBSOLETE    NAME is the socket domain used for communication with the TIP, */
-/* OBSOLETE    then a space and the socket name or TIP-host name. */
-/* OBSOLETE    '<udi_udi_config_id>' for example. */
-/* OBSOLETE  */ */
-/* OBSOLETE  */
-/* OBSOLETE /* XXX - need cleanups for udiconnect for various failures!!! */ */
-/* OBSOLETE  */
-/* OBSOLETE static void */
-/* OBSOLETE udi_open (char *name, int from_tty) */
-/* OBSOLETE { */
-/* OBSOLETE   unsigned int prl; */
-/* OBSOLETE   char *p; */
-/* OBSOLETE   int cnt; */
-/* OBSOLETE   UDIMemoryRange KnownMemory[10]; */
-/* OBSOLETE   UDIUInt32 ChipVersions[10]; */
-/* OBSOLETE   UDIInt NumberOfRanges = 10; */
-/* OBSOLETE   UDIInt NumberOfChips = 10; */
-/* OBSOLETE   UDIPId PId; */
-/* OBSOLETE   UDIUInt32 TIPId, TargetId, DFEId, DFE, TIP, DFEIPCId, TIPIPCId; */
-/* OBSOLETE  */
-/* OBSOLETE   target_preopen (from_tty); */
-/* OBSOLETE  */
-/* OBSOLETE   entry.Offset = 0; */
-/* OBSOLETE  */
-/* OBSOLETE   for (cnt = 0; cnt < BKPT_TABLE_SIZE; cnt++) */
-/* OBSOLETE     bkpt_table[cnt].Type = 0; */
-/* OBSOLETE  */
-/* OBSOLETE   if (udi_config_id) */
-/* OBSOLETE     xfree (udi_config_id); */
-/* OBSOLETE  */
-/* OBSOLETE   if (!name) */
-/* OBSOLETE     error ("Usage: target udi config_id, where config_id appears in udi_soc file"); */
-/* OBSOLETE  */
-/* OBSOLETE   udi_config_id = xstrdup (strtok (name, " \t")); */
-/* OBSOLETE  */
-/* OBSOLETE   if (UDIConnect (udi_config_id, &udi_session_id)) */
-/* OBSOLETE     /* FIXME: Should set udi_session_id to -1 here.  */ */
-/* OBSOLETE     error ("UDIConnect() failed: %s\n", dfe_errmsg); */
-/* OBSOLETE  */
-/* OBSOLETE   push_target (&udi_ops); */
-/* OBSOLETE  */
-/* OBSOLETE   /* */
-/* OBSOLETE      ** Initialize target configuration structure (global) */
-/* OBSOLETE    */ */
-/* OBSOLETE   if (UDIGetTargetConfig (KnownMemory, &NumberOfRanges, */
-/* OBSOLETE 			  ChipVersions, &NumberOfChips)) */
-/* OBSOLETE     error ("UDIGetTargetConfig() failed"); */
-/* OBSOLETE   if (NumberOfChips > 2) */
-/* OBSOLETE     fprintf_unfiltered (gdb_stderr, "Target has more than one processor\n"); */
-/* OBSOLETE   for (cnt = 0; cnt < NumberOfRanges; cnt++) */
-/* OBSOLETE     { */
-/* OBSOLETE       switch (KnownMemory[cnt].Space) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	default: */
-/* OBSOLETE 	  fprintf_unfiltered (gdb_stderr, "UDIGetTargetConfig() unknown memory space\n"); */
-/* OBSOLETE 	  break; */
-/* OBSOLETE 	case UDI29KCP_S: */
-/* OBSOLETE 	  break; */
-/* OBSOLETE 	case UDI29KIROMSpace: */
-/* OBSOLETE 	  RMemStart = KnownMemory[cnt].Offset; */
-/* OBSOLETE 	  RMemSize = KnownMemory[cnt].Size; */
-/* OBSOLETE 	  break; */
-/* OBSOLETE 	case UDI29KIRAMSpace: */
-/* OBSOLETE 	  IMemStart = KnownMemory[cnt].Offset; */
-/* OBSOLETE 	  IMemSize = KnownMemory[cnt].Size; */
-/* OBSOLETE 	  break; */
-/* OBSOLETE 	case UDI29KDRAMSpace: */
-/* OBSOLETE 	  DMemStart = KnownMemory[cnt].Offset; */
-/* OBSOLETE 	  DMemSize = KnownMemory[cnt].Size; */
-/* OBSOLETE 	  break; */
-/* OBSOLETE 	} */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   a29k_get_processor_type (); */
-/* OBSOLETE  */
-/* OBSOLETE   if (UDICreateProcess (&PId)) */
-/* OBSOLETE     fprintf_unfiltered (gdb_stderr, "UDICreateProcess() failed\n"); */
-/* OBSOLETE  */
-/* OBSOLETE   /* Print out some stuff, letting the user now what's going on */ */
-/* OBSOLETE   if (UDICapabilities (&TIPId, &TargetId, DFEId, DFE, &TIP, &DFEIPCId, */
-/* OBSOLETE 		       &TIPIPCId, sbuf)) */
-/* OBSOLETE     error ("UDICapabilities() failed"); */
-/* OBSOLETE   if (from_tty) */
-/* OBSOLETE     { */
-/* OBSOLETE       printf_filtered ("Connected via UDI socket,\n\ */
-/* OBSOLETE  DFE-IPC version %x.%x.%x  TIP-IPC version %x.%x.%x  TIP version %x.%x.%x\n %s\n", */
-/* OBSOLETE 	       (DFEIPCId >> 8) & 0xf, (DFEIPCId >> 4) & 0xf, DFEIPCId & 0xf, */
-/* OBSOLETE 	       (TIPIPCId >> 8) & 0xf, (TIPIPCId >> 4) & 0xf, TIPIPCId & 0xf, */
-/* OBSOLETE 	       (TargetId >> 8) & 0xf, (TargetId >> 4) & 0xf, TargetId & 0xf, */
-/* OBSOLETE 		       sbuf); */
-/* OBSOLETE     } */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /******************************************************************* UDI_CLOSE */
-/* OBSOLETE    Close the open connection to the TIP process. */
-/* OBSOLETE    Use this when you want to detach and do something else */
-/* OBSOLETE    with your gdb.  */ */
-/* OBSOLETE static void */
-/* OBSOLETE udi_close (			/*FIXME: how is quitting used */ */
-/* OBSOLETE 	    int quitting) */
-/* OBSOLETE { */
-/* OBSOLETE   if (udi_session_id < 0) */
-/* OBSOLETE     return; */
-/* OBSOLETE  */
-/* OBSOLETE   /* We should never get here if there isn't something valid in */
-/* OBSOLETE      udi_session_id.  */ */
-/* OBSOLETE  */
-/* OBSOLETE   if (UDIDisconnect (udi_session_id, UDITerminateSession)) */
-/* OBSOLETE     { */
-/* OBSOLETE       if (quitting) */
-/* OBSOLETE 	warning ("UDIDisconnect() failed in udi_close"); */
-/* OBSOLETE       else */
-/* OBSOLETE 	error ("UDIDisconnect() failed in udi_close"); */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   /* Do not try to close udi_session_id again, later in the program.  */ */
-/* OBSOLETE   udi_session_id = -1; */
-/* OBSOLETE   inferior_ptid = null_ptid; */
-/* OBSOLETE  */
-/* OBSOLETE   printf_filtered ("  Ending remote debugging\n"); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /**************************************************************** UDI_ATACH */ */
-/* OBSOLETE /* Attach to a program that is already loaded and running  */
-/* OBSOLETE  * Upon exiting the process's execution is stopped. */
-/* OBSOLETE  */ */
-/* OBSOLETE static void */
-/* OBSOLETE udi_attach (char *args, int from_tty) */
-/* OBSOLETE { */
-/* OBSOLETE   UDIResource From; */
-/* OBSOLETE   UDIInt32 PC_adds; */
-/* OBSOLETE   UDICount Count = 1; */
-/* OBSOLETE   UDISizeT Size = 4; */
-/* OBSOLETE   UDICount CountDone; */
-/* OBSOLETE   UDIBool HostEndian = 0; */
-/* OBSOLETE   UDIError err; */
-/* OBSOLETE  */
-/* OBSOLETE   if (args == NULL) */
-/* OBSOLETE     error_no_arg ("program to attach"); */
-/* OBSOLETE  */
-/* OBSOLETE   if (udi_session_id < 0) */
-/* OBSOLETE     error ("UDI connection not opened yet, use the 'target udi' command.\n"); */
-/* OBSOLETE  */
-/* OBSOLETE   if (from_tty) */
-/* OBSOLETE     printf_unfiltered ("Attaching to remote program %s...\n", prog_name); */
-/* OBSOLETE  */
-/* OBSOLETE   UDIStop (); */
-/* OBSOLETE   From.Space = UDI29KSpecialRegs; */
-/* OBSOLETE   From.Offset = 11; */
-/* OBSOLETE   if (err = UDIRead (From, &PC_adds, Count, Size, &CountDone, HostEndian)) */
-/* OBSOLETE     error ("UDIRead failed in udi_attach"); */
-/* OBSOLETE   printf_unfiltered ("Remote process is now halted, pc1 = 0x%x.\n", PC_adds); */
-/* OBSOLETE } */
-/* OBSOLETE /************************************************************* UDI_DETACH */ */
-/* OBSOLETE /* Terminate the open connection to the TIP process. */
-/* OBSOLETE    Use this when you want to detach and do something else */
-/* OBSOLETE    with your gdb.  Leave remote process running (with no breakpoints set). */ */
-/* OBSOLETE static void */
-/* OBSOLETE udi_detach (char *args, int from_tty) */
-/* OBSOLETE { */
-/* OBSOLETE  */
-/* OBSOLETE   remove_breakpoints ();	/* Just in case there were any left in */ */
-/* OBSOLETE  */
-/* OBSOLETE   if (UDIDisconnect (udi_session_id, UDIContinueSession)) */
-/* OBSOLETE     error ("UDIDisconnect() failed in udi_detach"); */
-/* OBSOLETE  */
-/* OBSOLETE   /* Don't try to UDIDisconnect it again in udi_close, which is called from */
-/* OBSOLETE      pop_target.  */ */
-/* OBSOLETE   udi_session_id = -1; */
-/* OBSOLETE   inferior_ptid = null_ptid; */
-/* OBSOLETE  */
-/* OBSOLETE   pop_target (); */
-/* OBSOLETE  */
-/* OBSOLETE   if (from_tty) */
-/* OBSOLETE     printf_unfiltered ("Detaching from TIP\n"); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE  */
-/* OBSOLETE /****************************************************************** UDI_RESUME */
-/* OBSOLETE ** Tell the remote machine to resume.  */ */
-/* OBSOLETE  */
-/* OBSOLETE static void */
-/* OBSOLETE udi_resume (ptid_t ptid, int step, enum target_signal sig) */
-/* OBSOLETE { */
-/* OBSOLETE   UDIError tip_error; */
-/* OBSOLETE   UDIUInt32 Steps = 1; */
-/* OBSOLETE   UDIStepType StepType = UDIStepNatural; */
-/* OBSOLETE   UDIRange Range; */
-/* OBSOLETE  */
-/* OBSOLETE   if (step)			/* step 1 instruction */ */
-/* OBSOLETE     { */
-/* OBSOLETE       tip_error = UDIStep (Steps, StepType, Range); */
-/* OBSOLETE       if (!tip_error) */
-/* OBSOLETE 	return; */
-/* OBSOLETE  */
-/* OBSOLETE       fprintf_unfiltered (gdb_stderr, "UDIStep() error = %d\n", tip_error); */
-/* OBSOLETE       error ("failed in udi_resume"); */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   if (UDIExecute ()) */
-/* OBSOLETE     error ("UDIExecute() failed in udi_resume"); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /******************************************************************** UDI_WAIT */
-/* OBSOLETE ** Wait until the remote machine stops, then return, */
-/* OBSOLETE    storing status in STATUS just as `wait' would.  */ */
-/* OBSOLETE  */
-/* OBSOLETE static ptid_t */
-/* OBSOLETE udi_wait (ptid_t ptid, struct target_waitstatus *status) */
-/* OBSOLETE { */
-/* OBSOLETE   UDIInt32 MaxTime; */
-/* OBSOLETE   UDIPId PId; */
-/* OBSOLETE   UDIInt32 StopReason; */
-/* OBSOLETE   UDISizeT CountDone; */
-/* OBSOLETE   int old_timeout = timeout; */
-/* OBSOLETE   int old_immediate_quit = immediate_quit; */
-/* OBSOLETE   int i; */
-/* OBSOLETE  */
-/* OBSOLETE   status->kind = TARGET_WAITKIND_EXITED; */
-/* OBSOLETE   status->value.integer = 0; */
-/* OBSOLETE  */
-/* OBSOLETE /* wait for message to arrive. It should be: */
-/* OBSOLETE    If the target stops executing, udi_wait() should return. */
-/* OBSOLETE  */ */
-/* OBSOLETE   timeout = 0;			/* Wait indefinetly for a message */ */
-/* OBSOLETE   immediate_quit = 1;		/* Helps ability to QUIT */ */
-/* OBSOLETE  */
-/* OBSOLETE   while (1) */
-/* OBSOLETE     { */
-/* OBSOLETE       i = 0; */
-/* OBSOLETE       MaxTime = UDIWaitForever; */
-/* OBSOLETE       UDIWait (MaxTime, &PId, &StopReason); */
-/* OBSOLETE       QUIT;			/* Let user quit if they want */ */
-/* OBSOLETE  */
-/* OBSOLETE       switch (StopReason & UDIGrossState) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	case UDIStdoutReady: */
-/* OBSOLETE 	  if (UDIGetStdout (sbuf, (UDISizeT) SBUF_MAX, &CountDone)) */
-/* OBSOLETE 	    /* This is said to happen if the program tries to output */
-/* OBSOLETE 	       a whole bunch of output (more than SBUF_MAX, I would */
-/* OBSOLETE 	       guess).  It doesn't seem to happen with the simulator.  */ */
-/* OBSOLETE 	    warning ("UDIGetStdout() failed in udi_wait"); */
-/* OBSOLETE 	  fwrite (sbuf, 1, CountDone, stdout); */
-/* OBSOLETE 	  gdb_flush (gdb_stdout); */
-/* OBSOLETE 	  continue; */
-/* OBSOLETE  */
-/* OBSOLETE 	case UDIStderrReady: */
-/* OBSOLETE 	  UDIGetStderr (sbuf, (UDISizeT) SBUF_MAX, &CountDone); */
-/* OBSOLETE 	  fwrite (sbuf, 1, CountDone, stderr); */
-/* OBSOLETE 	  gdb_flush (gdb_stderr); */
-/* OBSOLETE 	  continue; */
-/* OBSOLETE  */
-/* OBSOLETE 	case UDIStdinNeeded: */
-/* OBSOLETE 	  { */
-/* OBSOLETE 	    int ch; */
-/* OBSOLETE 	    i = 0; */
-/* OBSOLETE 	    do */
-/* OBSOLETE 	      { */
-/* OBSOLETE 		ch = getchar (); */
-/* OBSOLETE 		if (ch == EOF) */
-/* OBSOLETE 		  break; */
-/* OBSOLETE 		sbuf[i++] = ch; */
-/* OBSOLETE 	      } */
-/* OBSOLETE 	    while (i < SBUF_MAX && ch != '\n'); */
-/* OBSOLETE 	    UDIPutStdin (sbuf, (UDISizeT) i, &CountDone); */
-/* OBSOLETE 	    continue; */
-/* OBSOLETE 	  } */
-/* OBSOLETE  */
-/* OBSOLETE 	case UDIRunning: */
-/* OBSOLETE 	  /* In spite of the fact that we told UDIWait to wait forever, it will */
-/* OBSOLETE 	     return spuriously sometimes.  */ */
-/* OBSOLETE 	case UDIStdinModeX: */
-/* OBSOLETE 	  continue; */
-/* OBSOLETE 	default: */
-/* OBSOLETE 	  break; */
-/* OBSOLETE 	} */
-/* OBSOLETE       break; */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   switch (StopReason & UDIGrossState) */
-/* OBSOLETE     { */
-/* OBSOLETE     case UDITrapped: */
-/* OBSOLETE       printf_unfiltered ("Am290*0 received vector number %d\n", StopReason >> 24); */
-/* OBSOLETE  */
-/* OBSOLETE       switch ((StopReason >> 8) & 0xff) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	case 0:		/* Illegal opcode */ */
-/* OBSOLETE 	  printf_unfiltered ("	(break point)\n"); */
-/* OBSOLETE 	  status->kind = TARGET_WAITKIND_STOPPED; */
-/* OBSOLETE 	  status->value.sig = TARGET_SIGNAL_TRAP; */
-/* OBSOLETE 	  break; */
-/* OBSOLETE 	case 1:		/* Unaligned Access */ */
-/* OBSOLETE 	  status->kind = TARGET_WAITKIND_STOPPED; */
-/* OBSOLETE 	  status->value.sig = TARGET_SIGNAL_BUS; */
-/* OBSOLETE 	  break; */
-/* OBSOLETE 	case 3: */
-/* OBSOLETE 	case 4: */
-/* OBSOLETE 	  status->kind = TARGET_WAITKIND_STOPPED; */
-/* OBSOLETE 	  status->value.sig = TARGET_SIGNAL_FPE; */
-/* OBSOLETE 	  break; */
-/* OBSOLETE 	case 5:		/* Protection Violation */ */
-/* OBSOLETE 	  status->kind = TARGET_WAITKIND_STOPPED; */
-/* OBSOLETE 	  /* Why not SEGV?  What is a Protection Violation?  */ */
-/* OBSOLETE 	  status->value.sig = TARGET_SIGNAL_ILL; */
-/* OBSOLETE 	  break; */
-/* OBSOLETE 	case 6: */
-/* OBSOLETE 	case 7: */
-/* OBSOLETE 	case 8:		/* User Instruction Mapping Miss */ */
-/* OBSOLETE 	case 9:		/* User Data Mapping Miss */ */
-/* OBSOLETE 	case 10:		/* Supervisor Instruction Mapping Miss */ */
-/* OBSOLETE 	case 11:		/* Supervisor Data Mapping Miss */ */
-/* OBSOLETE 	  status->kind = TARGET_WAITKIND_STOPPED; */
-/* OBSOLETE 	  status->value.sig = TARGET_SIGNAL_SEGV; */
-/* OBSOLETE 	  break; */
-/* OBSOLETE 	case 12: */
-/* OBSOLETE 	case 13: */
-/* OBSOLETE 	  status->kind = TARGET_WAITKIND_STOPPED; */
-/* OBSOLETE 	  status->value.sig = TARGET_SIGNAL_ILL; */
-/* OBSOLETE 	  break; */
-/* OBSOLETE 	case 14:		/* Timer */ */
-/* OBSOLETE 	  status->kind = TARGET_WAITKIND_STOPPED; */
-/* OBSOLETE 	  status->value.sig = TARGET_SIGNAL_ALRM; */
-/* OBSOLETE 	  break; */
-/* OBSOLETE 	case 15:		/* Trace */ */
-/* OBSOLETE 	  status->kind = TARGET_WAITKIND_STOPPED; */
-/* OBSOLETE 	  status->value.sig = TARGET_SIGNAL_TRAP; */
-/* OBSOLETE 	  break; */
-/* OBSOLETE 	case 16:		/* INTR0 */ */
-/* OBSOLETE 	case 17:		/* INTR1 */ */
-/* OBSOLETE 	case 18:		/* INTR2 */ */
-/* OBSOLETE 	case 19:		/* INTR3/Internal */ */
-/* OBSOLETE 	case 20:		/* TRAP0 */ */
-/* OBSOLETE 	case 21:		/* TRAP1 */ */
-/* OBSOLETE 	  status->kind = TARGET_WAITKIND_STOPPED; */
-/* OBSOLETE 	  status->value.sig = TARGET_SIGNAL_INT; */
-/* OBSOLETE 	  break; */
-/* OBSOLETE 	case 22:		/* Floating-Point Exception */ */
-/* OBSOLETE 	  status->kind = TARGET_WAITKIND_STOPPED; */
-/* OBSOLETE 	  /* Why not FPE?  */ */
-/* OBSOLETE 	  status->value.sig = TARGET_SIGNAL_ILL; */
-/* OBSOLETE 	  break; */
-/* OBSOLETE 	case 77:		/* assert 77 */ */
-/* OBSOLETE 	  status->kind = TARGET_WAITKIND_STOPPED; */
-/* OBSOLETE 	  status->value.sig = TARGET_SIGNAL_TRAP; */
-/* OBSOLETE 	  break; */
-/* OBSOLETE 	default: */
-/* OBSOLETE 	  status->kind = TARGET_WAITKIND_EXITED; */
-/* OBSOLETE 	  status->value.integer = 0; */
-/* OBSOLETE 	} */
-/* OBSOLETE       break; */
-/* OBSOLETE     case UDINotExecuting: */
-/* OBSOLETE       status->kind = TARGET_WAITKIND_STOPPED; */
-/* OBSOLETE       status->value.sig = TARGET_SIGNAL_TERM; */
-/* OBSOLETE       break; */
-/* OBSOLETE     case UDIStopped: */
-/* OBSOLETE       status->kind = TARGET_WAITKIND_STOPPED; */
-/* OBSOLETE       status->value.sig = TARGET_SIGNAL_TSTP; */
-/* OBSOLETE       break; */
-/* OBSOLETE     case UDIWarned: */
-/* OBSOLETE       status->kind = TARGET_WAITKIND_STOPPED; */
-/* OBSOLETE       status->value.sig = TARGET_SIGNAL_URG; */
-/* OBSOLETE       break; */
-/* OBSOLETE     case UDIStepped: */
-/* OBSOLETE     case UDIBreak: */
-/* OBSOLETE       status->kind = TARGET_WAITKIND_STOPPED; */
-/* OBSOLETE       status->value.sig = TARGET_SIGNAL_TRAP; */
-/* OBSOLETE       break; */
-/* OBSOLETE     case UDIWaiting: */
-/* OBSOLETE       status->kind = TARGET_WAITKIND_STOPPED; */
-/* OBSOLETE       status->value.sig = TARGET_SIGNAL_STOP; */
-/* OBSOLETE       break; */
-/* OBSOLETE     case UDIHalted: */
-/* OBSOLETE       status->kind = TARGET_WAITKIND_STOPPED; */
-/* OBSOLETE       status->value.sig = TARGET_SIGNAL_KILL; */
-/* OBSOLETE       break; */
-/* OBSOLETE     case UDIExited: */
-/* OBSOLETE     default: */
-/* OBSOLETE       status->kind = TARGET_WAITKIND_EXITED; */
-/* OBSOLETE       status->value.integer = 0; */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   timeout = old_timeout;	/* Restore original timeout value */ */
-/* OBSOLETE   immediate_quit = old_immediate_quit; */
-/* OBSOLETE   return inferior_ptid; */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE #if 0 */
-/* OBSOLETE /* Handy for debugging */ */
-/* OBSOLETE udi_pc (void) */
-/* OBSOLETE { */
-/* OBSOLETE   UDIResource From; */
-/* OBSOLETE   UDIUInt32 *To; */
-/* OBSOLETE   UDICount Count; */
-/* OBSOLETE   UDISizeT Size = 4; */
-/* OBSOLETE   UDICount CountDone; */
-/* OBSOLETE   UDIBool HostEndian = 0; */
-/* OBSOLETE   UDIError err; */
-/* OBSOLETE   int pc[2]; */
-/* OBSOLETE   unsigned long myregs[256]; */
-/* OBSOLETE   int i; */
-/* OBSOLETE  */
-/* OBSOLETE   From.Space = UDI29KPC; */
-/* OBSOLETE   From.Offset = 0; */
-/* OBSOLETE   To = (UDIUInt32 *) pc; */
-/* OBSOLETE   Count = 2; */
-/* OBSOLETE  */
-/* OBSOLETE   err = UDIRead (From, To, Count, Size, &CountDone, HostEndian); */
-/* OBSOLETE  */
-/* OBSOLETE   printf_unfiltered ("err = %d, CountDone = %d, pc[0] = 0x%x, pc[1] = 0x%x\n", */
-/* OBSOLETE 		     err, CountDone, pc[0], pc[1]); */
-/* OBSOLETE  */
-/* OBSOLETE   udi_fetch_registers (-1); */
-/* OBSOLETE  */
-/* OBSOLETE   printf_unfiltered ("other pc1 = 0x%x, pc0 = 0x%x\n", *(int *) &registers[4 * PC_REGNUM], */
-/* OBSOLETE 		     *(int *) &registers[4 * NPC_REGNUM]); */
-/* OBSOLETE  */
-/* OBSOLETE   /* Now, read all the registers globally */ */
-/* OBSOLETE  */
-/* OBSOLETE   From.Space = UDI29KGlobalRegs; */
-/* OBSOLETE   From.Offset = 0; */
-/* OBSOLETE   err = UDIRead (From, myregs, 256, 4, &CountDone, HostEndian); */
-/* OBSOLETE  */
-/* OBSOLETE   printf ("err = %d, CountDone = %d\n", err, CountDone); */
-/* OBSOLETE  */
-/* OBSOLETE   printf ("\n"); */
-/* OBSOLETE  */
-/* OBSOLETE   for (i = 0; i < 256; i += 2) */
-/* OBSOLETE     printf ("%d:\t%#10x\t%11d\t%#10x\t%11d\n", i, myregs[i], myregs[i], */
-/* OBSOLETE 	    myregs[i + 1], myregs[i + 1]); */
-/* OBSOLETE   printf ("\n"); */
-/* OBSOLETE  */
-/* OBSOLETE   return pc[0]; */
-/* OBSOLETE } */
-/* OBSOLETE #endif */
-/* OBSOLETE  */
-/* OBSOLETE /********************************************************** UDI_FETCH_REGISTERS */
-/* OBSOLETE  * Read a remote register 'regno'.  */
-/* OBSOLETE  * If regno==-1 then read all the registers. */
-/* OBSOLETE  */ */
-/* OBSOLETE static void */
-/* OBSOLETE udi_fetch_registers (int regno) */
-/* OBSOLETE { */
-/* OBSOLETE   UDIResource From; */
-/* OBSOLETE   UDIUInt32 *To; */
-/* OBSOLETE   UDICount Count; */
-/* OBSOLETE   UDISizeT Size = 4; */
-/* OBSOLETE   UDICount CountDone; */
-/* OBSOLETE   UDIBool HostEndian = 0; */
-/* OBSOLETE   UDIError err; */
-/* OBSOLETE   int i; */
-/* OBSOLETE  */
-/* OBSOLETE   if (regno >= 0) */
-/* OBSOLETE     { */
-/* OBSOLETE       fetch_register (regno); */
-/* OBSOLETE       return; */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE /* Gr1/rsp */ */
-/* OBSOLETE  */
-/* OBSOLETE   From.Space = UDI29KGlobalRegs; */
-/* OBSOLETE   From.Offset = 1; */
-/* OBSOLETE   To = (UDIUInt32 *) & registers[4 * GR1_REGNUM]; */
-/* OBSOLETE   Count = 1; */
-/* OBSOLETE   if (err = UDIRead (From, To, Count, Size, &CountDone, HostEndian)) */
-/* OBSOLETE     error ("UDIRead() failed in udi_fetch_registers"); */
-/* OBSOLETE  */
-/* OBSOLETE   register_valid[GR1_REGNUM] = 1; */
-/* OBSOLETE  */
-/* OBSOLETE #if defined(GR64_REGNUM)	/* Read gr64-127 */ */
-/* OBSOLETE  */
-/* OBSOLETE /* Global Registers gr64-gr95 */ */
-/* OBSOLETE  */
-/* OBSOLETE   From.Space = UDI29KGlobalRegs; */
-/* OBSOLETE   From.Offset = 64; */
-/* OBSOLETE   To = (UDIUInt32 *) & registers[4 * GR64_REGNUM]; */
-/* OBSOLETE   Count = 32; */
-/* OBSOLETE   if (err = UDIRead (From, To, Count, Size, &CountDone, HostEndian)) */
-/* OBSOLETE     error ("UDIRead() failed in udi_fetch_registers"); */
-/* OBSOLETE  */
-/* OBSOLETE   for (i = GR64_REGNUM; i < GR64_REGNUM + 32; i++) */
-/* OBSOLETE     register_valid[i] = 1; */
-/* OBSOLETE  */
-/* OBSOLETE #endif /*  GR64_REGNUM */ */
-/* OBSOLETE  */
-/* OBSOLETE /* Global Registers gr96-gr127 */ */
-/* OBSOLETE  */
-/* OBSOLETE   From.Space = UDI29KGlobalRegs; */
-/* OBSOLETE   From.Offset = 96; */
-/* OBSOLETE   To = (UDIUInt32 *) & registers[4 * GR96_REGNUM]; */
-/* OBSOLETE   Count = 32; */
-/* OBSOLETE   if (err = UDIRead (From, To, Count, Size, &CountDone, HostEndian)) */
-/* OBSOLETE     error ("UDIRead() failed in udi_fetch_registers"); */
-/* OBSOLETE  */
-/* OBSOLETE   for (i = GR96_REGNUM; i < GR96_REGNUM + 32; i++) */
-/* OBSOLETE     register_valid[i] = 1; */
-/* OBSOLETE  */
-/* OBSOLETE /* Local Registers */ */
-/* OBSOLETE  */
-/* OBSOLETE   From.Space = UDI29KLocalRegs; */
-/* OBSOLETE   From.Offset = 0; */
-/* OBSOLETE   To = (UDIUInt32 *) & registers[4 * LR0_REGNUM]; */
-/* OBSOLETE   Count = 128; */
-/* OBSOLETE   if (err = UDIRead (From, To, Count, Size, &CountDone, HostEndian)) */
-/* OBSOLETE     error ("UDIRead() failed in udi_fetch_registers"); */
-/* OBSOLETE  */
-/* OBSOLETE   for (i = LR0_REGNUM; i < LR0_REGNUM + 128; i++) */
-/* OBSOLETE     register_valid[i] = 1; */
-/* OBSOLETE  */
-/* OBSOLETE /* Protected Special Registers */ */
-/* OBSOLETE  */
-/* OBSOLETE   From.Space = UDI29KSpecialRegs; */
-/* OBSOLETE   From.Offset = 0; */
-/* OBSOLETE   To = (UDIUInt32 *) & registers[4 * SR_REGNUM (0)]; */
-/* OBSOLETE   Count = 15; */
-/* OBSOLETE   if (err = UDIRead (From, To, Count, Size, &CountDone, HostEndian)) */
-/* OBSOLETE     error ("UDIRead() failed in udi_fetch_registers"); */
-/* OBSOLETE  */
-/* OBSOLETE   for (i = SR_REGNUM (0); i < SR_REGNUM (0) + 15; i++) */
-/* OBSOLETE     register_valid[i] = 1; */
-/* OBSOLETE  */
-/* OBSOLETE   if (USE_SHADOW_PC) */
-/* OBSOLETE     {				/* Let regno_to_srnum() handle the register number */ */
-/* OBSOLETE       fetch_register (NPC_REGNUM); */
-/* OBSOLETE       fetch_register (PC_REGNUM); */
-/* OBSOLETE       fetch_register (PC2_REGNUM); */
-/* OBSOLETE  */
-/* OBSOLETE /* Unprotected Special Registers sr128-sr135 */ */
-/* OBSOLETE  */
-/* OBSOLETE       From.Space = UDI29KSpecialRegs; */
-/* OBSOLETE       From.Offset = 128; */
-/* OBSOLETE       To = (UDIUInt32 *) & registers[4 * SR_REGNUM (128)]; */
-/* OBSOLETE       Count = 135 - 128 + 1; */
-/* OBSOLETE       if (err = UDIRead (From, To, Count, Size, &CountDone, HostEndian)) */
-/* OBSOLETE 	error ("UDIRead() failed in udi_fetch_registers"); */
-/* OBSOLETE  */
-/* OBSOLETE       for (i = SR_REGNUM (128); i < SR_REGNUM (128) + 135 - 128 + 1; i++) */
-/* OBSOLETE 	register_valid[i] = 1; */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   if (remote_debug) */
-/* OBSOLETE     { */
-/* OBSOLETE       fprintf_unfiltered (gdb_stdlog, "Fetching all registers\n"); */
-/* OBSOLETE       fprintf_unfiltered (gdb_stdlog, */
-/* OBSOLETE 			  "Fetching PC0 = 0x%x, PC1 = 0x%x, PC2 = 0x%x\n", */
-/* OBSOLETE 			  read_register (NPC_REGNUM), */
-/* OBSOLETE 			  read_register (PC_REGNUM), */
-/* OBSOLETE 			  read_register (PC2_REGNUM)); */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   /* There doesn't seem to be any way to get these.  */ */
-/* OBSOLETE   { */
-/* OBSOLETE     int val = -1; */
-/* OBSOLETE     supply_register (FPE_REGNUM, (char *) &val); */
-/* OBSOLETE     supply_register (INTE_REGNUM, (char *) &val); */
-/* OBSOLETE     supply_register (FPS_REGNUM, (char *) &val); */
-/* OBSOLETE     supply_register (EXO_REGNUM, (char *) &val); */
-/* OBSOLETE   } */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE  */
-/* OBSOLETE /********************************************************* UDI_STORE_REGISTERS */
-/* OBSOLETE ** Store register regno into the target.   */
-/* OBSOLETE  * If regno==-1 then store all the registers. */
-/* OBSOLETE  */ */
-/* OBSOLETE  */
-/* OBSOLETE static void */
-/* OBSOLETE udi_store_registers (int regno) */
-/* OBSOLETE { */
-/* OBSOLETE   UDIUInt32 *From; */
-/* OBSOLETE   UDIResource To; */
-/* OBSOLETE   UDICount Count; */
-/* OBSOLETE   UDISizeT Size = 4; */
-/* OBSOLETE   UDICount CountDone; */
-/* OBSOLETE   UDIBool HostEndian = 0; */
-/* OBSOLETE  */
-/* OBSOLETE   if (regno >= 0) */
-/* OBSOLETE     { */
-/* OBSOLETE       store_register (regno); */
-/* OBSOLETE       return; */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   if (remote_debug) */
-/* OBSOLETE     { */
-/* OBSOLETE       fprintf_unfiltered (gdb_stdlog, "Storing all registers\n"); */
-/* OBSOLETE       fprintf_unfiltered (gdb_stdlog, */
-/* OBSOLETE 			  "PC0 = 0x%x, PC1 = 0x%x, PC2 = 0x%x\n", */
-/* OBSOLETE 			  read_register (NPC_REGNUM), */
-/* OBSOLETE 			  read_register (PC_REGNUM), */
-/* OBSOLETE 			  read_register (PC2_REGNUM)); */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE /* Gr1/rsp */ */
-/* OBSOLETE  */
-/* OBSOLETE   From = (UDIUInt32 *) & registers[4 * GR1_REGNUM]; */
-/* OBSOLETE   To.Space = UDI29KGlobalRegs; */
-/* OBSOLETE   To.Offset = 1; */
-/* OBSOLETE   Count = 1; */
-/* OBSOLETE   if (UDIWrite (From, To, Count, Size, &CountDone, HostEndian)) */
-/* OBSOLETE     error ("UDIWrite() failed in udi_store_regisetrs"); */
-/* OBSOLETE  */
-/* OBSOLETE #if defined(GR64_REGNUM) */
-/* OBSOLETE  */
-/* OBSOLETE /* Global registers gr64-gr95 */ */
-/* OBSOLETE  */
-/* OBSOLETE   From = (UDIUInt32 *) & registers[4 * GR64_REGNUM]; */
-/* OBSOLETE   To.Space = UDI29KGlobalRegs; */
-/* OBSOLETE   To.Offset = 64; */
-/* OBSOLETE   Count = 32; */
-/* OBSOLETE   if (UDIWrite (From, To, Count, Size, &CountDone, HostEndian)) */
-/* OBSOLETE     error ("UDIWrite() failed in udi_store_regisetrs"); */
-/* OBSOLETE  */
-/* OBSOLETE #endif /* GR64_REGNUM */ */
-/* OBSOLETE  */
-/* OBSOLETE /* Global registers gr96-gr127 */ */
-/* OBSOLETE  */
-/* OBSOLETE   From = (UDIUInt32 *) & registers[4 * GR96_REGNUM]; */
-/* OBSOLETE   To.Space = UDI29KGlobalRegs; */
-/* OBSOLETE   To.Offset = 96; */
-/* OBSOLETE   Count = 32; */
-/* OBSOLETE   if (UDIWrite (From, To, Count, Size, &CountDone, HostEndian)) */
-/* OBSOLETE     error ("UDIWrite() failed in udi_store_regisetrs"); */
-/* OBSOLETE  */
-/* OBSOLETE /* Local Registers */ */
-/* OBSOLETE  */
-/* OBSOLETE   From = (UDIUInt32 *) & registers[4 * LR0_REGNUM]; */
-/* OBSOLETE   To.Space = UDI29KLocalRegs; */
-/* OBSOLETE   To.Offset = 0; */
-/* OBSOLETE   Count = 128; */
-/* OBSOLETE   if (UDIWrite (From, To, Count, Size, &CountDone, HostEndian)) */
-/* OBSOLETE     error ("UDIWrite() failed in udi_store_regisetrs"); */
-/* OBSOLETE  */
-/* OBSOLETE  */
-/* OBSOLETE   /* Protected Special Registers *//* VAB through TMR */ */
-/* OBSOLETE  */
-/* OBSOLETE   From = (UDIUInt32 *) & registers[4 * SR_REGNUM (0)]; */
-/* OBSOLETE   To.Space = UDI29KSpecialRegs; */
-/* OBSOLETE   To.Offset = 0; */
-/* OBSOLETE   Count = 10; */
-/* OBSOLETE   if (UDIWrite (From, To, Count, Size, &CountDone, HostEndian)) */
-/* OBSOLETE     error ("UDIWrite() failed in udi_store_regisetrs"); */
-/* OBSOLETE  */
-/* OBSOLETE /* PC0, PC1, PC2 possibly as shadow registers */ */
-/* OBSOLETE  */
-/* OBSOLETE   From = (UDIUInt32 *) & registers[4 * SR_REGNUM (10)]; */
-/* OBSOLETE   To.Space = UDI29KSpecialRegs; */
-/* OBSOLETE   Count = 3; */
-/* OBSOLETE   if (USE_SHADOW_PC) */
-/* OBSOLETE     To.Offset = 20;		/* SPC0 */ */
-/* OBSOLETE   else */
-/* OBSOLETE     To.Offset = 10;		/* PC0 */ */
-/* OBSOLETE   if (UDIWrite (From, To, Count, Size, &CountDone, HostEndian)) */
-/* OBSOLETE     error ("UDIWrite() failed in udi_store_regisetrs"); */
-/* OBSOLETE  */
-/* OBSOLETE /* PC1 via UDI29KPC */ */
-/* OBSOLETE  */
-/* OBSOLETE   From = (UDIUInt32 *) & registers[4 * PC_REGNUM]; */
-/* OBSOLETE   To.Space = UDI29KPC; */
-/* OBSOLETE   To.Offset = 0;		/* PC1 */ */
-/* OBSOLETE   Count = 1; */
-/* OBSOLETE   if (UDIWrite (From, To, Count, Size, &CountDone, HostEndian)) */
-/* OBSOLETE     error ("UDIWrite() failed in udi_store_regisetrs"); */
-/* OBSOLETE  */
-/* OBSOLETE   /* LRU and MMU */ */
-/* OBSOLETE  */
-/* OBSOLETE   From = (UDIUInt32 *) & registers[4 * SR_REGNUM (13)]; */
-/* OBSOLETE   To.Space = UDI29KSpecialRegs; */
-/* OBSOLETE   To.Offset = 13; */
-/* OBSOLETE   Count = 2; */
-/* OBSOLETE   if (UDIWrite (From, To, Count, Size, &CountDone, HostEndian)) */
-/* OBSOLETE     error ("UDIWrite() failed in udi_store_regisetrs"); */
-/* OBSOLETE  */
-/* OBSOLETE /* Unprotected Special Registers */ */
-/* OBSOLETE  */
-/* OBSOLETE   From = (UDIUInt32 *) & registers[4 * SR_REGNUM (128)]; */
-/* OBSOLETE   To.Space = UDI29KSpecialRegs; */
-/* OBSOLETE   To.Offset = 128; */
-/* OBSOLETE   Count = 135 - 128 + 1; */
-/* OBSOLETE   if (UDIWrite (From, To, Count, Size, &CountDone, HostEndian)) */
-/* OBSOLETE     error ("UDIWrite() failed in udi_store_regisetrs"); */
-/* OBSOLETE  */
-/* OBSOLETE   registers_changed (); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /****************************************************** UDI_PREPARE_TO_STORE */ */
-/* OBSOLETE /* Get ready to modify the registers array.  On machines which store */
-/* OBSOLETE    individual registers, this doesn't need to do anything.  On machines */
-/* OBSOLETE    which store all the registers in one fell swoop, this makes sure */
-/* OBSOLETE    that registers contains all the registers from the program being */
-/* OBSOLETE    debugged.  */ */
-/* OBSOLETE  */
-/* OBSOLETE static void */
-/* OBSOLETE udi_prepare_to_store (void) */
-/* OBSOLETE { */
-/* OBSOLETE   /* Do nothing, since we can store individual regs */ */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /********************************************************** TRANSLATE_ADDR */ */
-/* OBSOLETE static CORE_ADDR */
-/* OBSOLETE translate_addr (CORE_ADDR addr) */
-/* OBSOLETE { */
-/* OBSOLETE #if defined(ULTRA3) && defined(KERNEL_DEBUGGING) */
-/* OBSOLETE   /* Check for a virtual address in the kernel */ */
-/* OBSOLETE   /* Assume physical address of ublock is in  paddr_u register */ */
-/* OBSOLETE   /* FIXME: doesn't work for user virtual addresses */ */
-/* OBSOLETE   if (addr >= UVADDR) */
-/* OBSOLETE     { */
-/* OBSOLETE       /* PADDR_U register holds the physical address of the ublock */ */
-/* OBSOLETE       CORE_ADDR i = (CORE_ADDR) read_register (PADDR_U_REGNUM); */
-/* OBSOLETE       return (i + addr - (CORE_ADDR) UVADDR); */
-/* OBSOLETE     } */
-/* OBSOLETE   else */
-/* OBSOLETE     { */
-/* OBSOLETE       return (addr); */
-/* OBSOLETE     } */
-/* OBSOLETE #else */
-/* OBSOLETE   return (addr); */
-/* OBSOLETE #endif */
-/* OBSOLETE } */
-/* OBSOLETE /************************************************* UDI_XFER_INFERIOR_MEMORY */ */
-/* OBSOLETE /* FIXME!  Merge these two.  */ */
-/* OBSOLETE static int */
-/* OBSOLETE udi_xfer_inferior_memory (CORE_ADDR memaddr, char *myaddr, int len, int write, */
-/* OBSOLETE 			  struct mem_attrib *attrib ATTRIBUTE_UNUSED, */
-/* OBSOLETE 			  struct target_ops *target ATTRIBUTE_UNUSED) */
-/* OBSOLETE { */
-/* OBSOLETE  */
-/* OBSOLETE   memaddr = translate_addr (memaddr); */
-/* OBSOLETE  */
-/* OBSOLETE   if (write) */
-/* OBSOLETE     return udi_write_inferior_memory (memaddr, myaddr, len); */
-/* OBSOLETE   else */
-/* OBSOLETE     return udi_read_inferior_memory (memaddr, myaddr, len); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /********************************************************** UDI_FILES_INFO */ */
-/* OBSOLETE static void */
-/* OBSOLETE udi_files_info (struct target_ops *target) */
-/* OBSOLETE { */
-/* OBSOLETE   printf_unfiltered ("\tAttached to UDI socket to %s", udi_config_id); */
-/* OBSOLETE   if (prog_name != NULL) */
-/* OBSOLETE     printf_unfiltered ("and running program %s", prog_name); */
-/* OBSOLETE   printf_unfiltered (".\n"); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /**************************************************** UDI_INSERT_BREAKPOINT */ */
-/* OBSOLETE static int */
-/* OBSOLETE udi_insert_breakpoint (CORE_ADDR addr, char *contents_cache) */
-/* OBSOLETE { */
-/* OBSOLETE   int cnt; */
-/* OBSOLETE   UDIError err; */
-/* OBSOLETE  */
-/* OBSOLETE   for (cnt = 0; cnt < BKPT_TABLE_SIZE; cnt++) */
-/* OBSOLETE     if (bkpt_table[cnt].Type == 0)	/* Find first free slot */ */
-/* OBSOLETE       break; */
-/* OBSOLETE  */
-/* OBSOLETE   if (cnt >= BKPT_TABLE_SIZE) */
-/* OBSOLETE     error ("Too many breakpoints set"); */
-/* OBSOLETE  */
-/* OBSOLETE   bkpt_table[cnt].Addr.Offset = addr; */
-/* OBSOLETE   bkpt_table[cnt].Addr.Space = UDI29KIRAMSpace; */
-/* OBSOLETE   bkpt_table[cnt].PassCount = 1; */
-/* OBSOLETE   bkpt_table[cnt].Type = UDIBreakFlagExecute; */
-/* OBSOLETE  */
-/* OBSOLETE   err = UDISetBreakpoint (bkpt_table[cnt].Addr, */
-/* OBSOLETE 			  bkpt_table[cnt].PassCount, */
-/* OBSOLETE 			  bkpt_table[cnt].Type, */
-/* OBSOLETE 			  &bkpt_table[cnt].BreakId); */
-/* OBSOLETE  */
-/* OBSOLETE   if (err == 0) */
-/* OBSOLETE     return 0;			/* Success */ */
-/* OBSOLETE  */
-/* OBSOLETE   bkpt_table[cnt].Type = 0; */
-/* OBSOLETE   error ("UDISetBreakpoint returned error code %d\n", err); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /**************************************************** UDI_REMOVE_BREAKPOINT */ */
-/* OBSOLETE static int */
-/* OBSOLETE udi_remove_breakpoint (CORE_ADDR addr, char *contents_cache) */
-/* OBSOLETE { */
-/* OBSOLETE   int cnt; */
-/* OBSOLETE   UDIError err; */
-/* OBSOLETE  */
-/* OBSOLETE   for (cnt = 0; cnt < BKPT_TABLE_SIZE; cnt++) */
-/* OBSOLETE     if (bkpt_table[cnt].Addr.Offset == addr)	/* Find matching breakpoint */ */
-/* OBSOLETE       break; */
-/* OBSOLETE  */
-/* OBSOLETE   if (cnt >= BKPT_TABLE_SIZE) */
-/* OBSOLETE     error ("Can't find breakpoint in table"); */
-/* OBSOLETE  */
-/* OBSOLETE   bkpt_table[cnt].Type = 0; */
-/* OBSOLETE  */
-/* OBSOLETE   err = UDIClearBreakpoint (bkpt_table[cnt].BreakId); */
-/* OBSOLETE   if (err == 0) */
-/* OBSOLETE     return 0;			/* Success */ */
-/* OBSOLETE  */
-/* OBSOLETE   error ("UDIClearBreakpoint returned error code %d\n", err); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE static void */
-/* OBSOLETE udi_kill (void) */
-/* OBSOLETE { */
-/* OBSOLETE  */
-/* OBSOLETE #if 0 */
-/* OBSOLETE /* */
-/* OBSOLETE    UDIStop does not really work as advertised.  It causes the TIP to close it's */
-/* OBSOLETE    connection, which usually results in GDB dying with a SIGPIPE.  For now, we */
-/* OBSOLETE    just invoke udi_close, which seems to get things right. */
-/* OBSOLETE  */ */
-/* OBSOLETE   UDIStop (); */
-/* OBSOLETE  */
-/* OBSOLETE   udi_session_id = -1; */
-/* OBSOLETE   inferior_ptid = null_ptid; */
-/* OBSOLETE  */
-/* OBSOLETE   if (from_tty) */
-/* OBSOLETE     printf_unfiltered ("Target has been stopped."); */
-/* OBSOLETE #endif /* 0 */ */
-/* OBSOLETE #if 0 */
-/* OBSOLETE   udi_close (0); */
-/* OBSOLETE   pop_target (); */
-/* OBSOLETE #endif /* 0 */ */
-/* OBSOLETE  */
-/* OBSOLETE   /* Keep the target around, e.g. so "run" can do the right thing when */
-/* OBSOLETE      we are already debugging something.  */ */
-/* OBSOLETE  */
-/* OBSOLETE   if (UDIDisconnect (udi_session_id, UDITerminateSession)) */
-/* OBSOLETE     { */
-/* OBSOLETE       warning ("UDIDisconnect() failed"); */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   /* Do not try to close udi_session_id again, later in the program.  */ */
-/* OBSOLETE   udi_session_id = -1; */
-/* OBSOLETE   inferior_ptid = null_ptid; */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /*  */
-/* OBSOLETE    Load a program into the target.  Args are: `program {options}'.  The options */
-/* OBSOLETE    are used to control loading of the program, and are NOT passed onto the */
-/* OBSOLETE    loaded code as arguments.  (You need to use the `run' command to do that.) */
-/* OBSOLETE  */
-/* OBSOLETE    The options are: */
-/* OBSOLETE    -ms %d       Set mem stack size to %d */
-/* OBSOLETE    -rs %d       Set regular stack size to %d */
-/* OBSOLETE    -i   send init info (default) */
-/* OBSOLETE    -noi don't send init info */
-/* OBSOLETE    -[tT]        Load Text section */
-/* OBSOLETE    -[dD]        Load Data section */
-/* OBSOLETE    -[bB]        Load BSS section */
-/* OBSOLETE    -[lL]        Load Lit section */
-/* OBSOLETE  */ */
-/* OBSOLETE  */
-/* OBSOLETE static void */
-/* OBSOLETE download (char *load_arg_string, int from_tty) */
-/* OBSOLETE { */
-/* OBSOLETE #define DEFAULT_MEM_STACK_SIZE 		0x6000 */
-/* OBSOLETE #define DEFAULT_REG_STACK_SIZE 		0x2000 */
-/* OBSOLETE  */
-/* OBSOLETE   char *token; */
-/* OBSOLETE   char *filename; */
-/* OBSOLETE   asection *section; */
-/* OBSOLETE   bfd *pbfd; */
-/* OBSOLETE   UDIError err; */
-/* OBSOLETE   int load_text = 1, load_data = 1, load_bss = 1, load_lit = 1; */
-/* OBSOLETE  */
-/* OBSOLETE   address_ranges[0].Space = UDI29KIRAMSpace; */
-/* OBSOLETE   address_ranges[0].Offset = 0xffffffff; */
-/* OBSOLETE   address_ranges[0].Size = 0; */
-/* OBSOLETE  */
-/* OBSOLETE   address_ranges[1].Space = UDI29KDRAMSpace; */
-/* OBSOLETE   address_ranges[1].Offset = 0xffffffff; */
-/* OBSOLETE   address_ranges[1].Size = 0; */
-/* OBSOLETE  */
-/* OBSOLETE   stack_sizes[0] = DEFAULT_REG_STACK_SIZE; */
-/* OBSOLETE   stack_sizes[1] = DEFAULT_MEM_STACK_SIZE; */
-/* OBSOLETE  */
-/* OBSOLETE   dont_repeat (); */
-/* OBSOLETE  */
-/* OBSOLETE   filename = strtok (load_arg_string, " \t"); */
-/* OBSOLETE   if (!filename) */
-/* OBSOLETE     error ("Must specify at least a file name with the load command"); */
-/* OBSOLETE  */
-/* OBSOLETE   filename = tilde_expand (filename); */
-/* OBSOLETE   make_cleanup (xfree, filename); */
-/* OBSOLETE  */
-/* OBSOLETE   while (token = strtok (NULL, " \t")) */
-/* OBSOLETE     { */
-/* OBSOLETE       if (token[0] == '-') */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  token++; */
-/* OBSOLETE  */
-/* OBSOLETE 	  if (STREQ (token, "ms")) */
-/* OBSOLETE 	    stack_sizes[1] = atol (strtok (NULL, " \t")); */
-/* OBSOLETE 	  else if (STREQ (token, "rs")) */
-/* OBSOLETE 	    stack_sizes[0] = atol (strtok (NULL, " \t")); */
-/* OBSOLETE 	  else */
-/* OBSOLETE 	    { */
-/* OBSOLETE 	      load_text = load_data = load_bss = load_lit = 0; */
-/* OBSOLETE  */
-/* OBSOLETE 	      while (*token) */
-/* OBSOLETE 		{ */
-/* OBSOLETE 		  switch (*token++) */
-/* OBSOLETE 		    { */
-/* OBSOLETE 		    case 't': */
-/* OBSOLETE 		    case 'T': */
-/* OBSOLETE 		      load_text = 1; */
-/* OBSOLETE 		      break; */
-/* OBSOLETE 		    case 'd': */
-/* OBSOLETE 		    case 'D': */
-/* OBSOLETE 		      load_data = 1; */
-/* OBSOLETE 		      break; */
-/* OBSOLETE 		    case 'b': */
-/* OBSOLETE 		    case 'B': */
-/* OBSOLETE 		      load_bss = 1; */
-/* OBSOLETE 		      break; */
-/* OBSOLETE 		    case 'l': */
-/* OBSOLETE 		    case 'L': */
-/* OBSOLETE 		      load_lit = 1; */
-/* OBSOLETE 		      break; */
-/* OBSOLETE 		    default: */
-/* OBSOLETE 		      error ("Unknown UDI load option -%s", token - 1); */
-/* OBSOLETE 		    } */
-/* OBSOLETE 		} */
-/* OBSOLETE 	    } */
-/* OBSOLETE 	} */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   pbfd = bfd_openr (filename, gnutarget); */
-/* OBSOLETE  */
-/* OBSOLETE   if (!pbfd) */
-/* OBSOLETE     /* FIXME: should be using bfd_errmsg, not assuming it was */
-/* OBSOLETE        bfd_error_system_call.  */ */
-/* OBSOLETE     perror_with_name (filename); */
-/* OBSOLETE  */
-/* OBSOLETE   /* FIXME: should be checking for errors from bfd_close (for one thing, */
-/* OBSOLETE      on error it does not free all the storage associated with the */
-/* OBSOLETE      bfd).  */ */
-/* OBSOLETE   make_cleanup_bfd_close (pbfd); */
-/* OBSOLETE  */
-/* OBSOLETE   QUIT; */
-/* OBSOLETE   immediate_quit++; */
-/* OBSOLETE  */
-/* OBSOLETE   if (!bfd_check_format (pbfd, bfd_object)) */
-/* OBSOLETE     error ("It doesn't seem to be an object file"); */
-/* OBSOLETE  */
-/* OBSOLETE   for (section = pbfd->sections; section; section = section->next) */
-/* OBSOLETE     { */
-/* OBSOLETE       if (bfd_get_section_flags (pbfd, section) & SEC_ALLOC) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  UDIResource To; */
-/* OBSOLETE 	  UDICount Count; */
-/* OBSOLETE 	  unsigned long section_size, section_end; */
-/* OBSOLETE 	  const char *section_name; */
-/* OBSOLETE  */
-/* OBSOLETE 	  section_name = bfd_get_section_name (pbfd, section); */
-/* OBSOLETE 	  if (STREQ (section_name, ".text") && !load_text) */
-/* OBSOLETE 	    continue; */
-/* OBSOLETE 	  else if (STREQ (section_name, ".data") && !load_data) */
-/* OBSOLETE 	    continue; */
-/* OBSOLETE 	  else if (STREQ (section_name, ".bss") && !load_bss) */
-/* OBSOLETE 	    continue; */
-/* OBSOLETE 	  else if (STREQ (section_name, ".lit") && !load_lit) */
-/* OBSOLETE 	    continue; */
-/* OBSOLETE  */
-/* OBSOLETE 	  To.Offset = bfd_get_section_vma (pbfd, section); */
-/* OBSOLETE 	  section_size = bfd_section_size (pbfd, section); */
-/* OBSOLETE 	  section_end = To.Offset + section_size; */
-/* OBSOLETE  */
-/* OBSOLETE 	  if (section_size == 0) */
-/* OBSOLETE 	    /* This is needed at least in the BSS case, where the code */
-/* OBSOLETE 	       below starts writing before it even checks the size.  */ */
-/* OBSOLETE 	    continue; */
-/* OBSOLETE  */
-/* OBSOLETE 	  printf_unfiltered ("[Loading section %s at %x (%d bytes)]\n", */
-/* OBSOLETE 			     section_name, */
-/* OBSOLETE 			     To.Offset, */
-/* OBSOLETE 			     section_size); */
-/* OBSOLETE  */
-/* OBSOLETE 	  if (bfd_get_section_flags (pbfd, section) & SEC_CODE) */
-/* OBSOLETE 	    { */
-/* OBSOLETE 	      To.Space = UDI29KIRAMSpace; */
-/* OBSOLETE  */
-/* OBSOLETE 	      address_ranges[0].Offset = min (address_ranges[0].Offset, */
-/* OBSOLETE 					      To.Offset); */
-/* OBSOLETE 	      address_ranges[0].Size = max (address_ranges[0].Size, */
-/* OBSOLETE 					    section_end */
-/* OBSOLETE 					    - address_ranges[0].Offset); */
-/* OBSOLETE 	    } */
-/* OBSOLETE 	  else */
-/* OBSOLETE 	    { */
-/* OBSOLETE 	      To.Space = UDI29KDRAMSpace; */
-/* OBSOLETE  */
-/* OBSOLETE 	      address_ranges[1].Offset = min (address_ranges[1].Offset, */
-/* OBSOLETE 					      To.Offset); */
-/* OBSOLETE 	      address_ranges[1].Size = max (address_ranges[1].Size, */
-/* OBSOLETE 					    section_end */
-/* OBSOLETE 					    - address_ranges[1].Offset); */
-/* OBSOLETE 	    } */
-/* OBSOLETE  */
-/* OBSOLETE 	  if (bfd_get_section_flags (pbfd, section) & SEC_LOAD)		/* Text, data or lit */ */
-/* OBSOLETE 	    { */
-/* OBSOLETE 	      file_ptr fptr; */
-/* OBSOLETE  */
-/* OBSOLETE 	      fptr = 0; */
-/* OBSOLETE  */
-/* OBSOLETE 	      while (section_size > 0) */
-/* OBSOLETE 		{ */
-/* OBSOLETE 		  char buffer[1024]; */
-/* OBSOLETE  */
-/* OBSOLETE 		  Count = min (section_size, 1024); */
-/* OBSOLETE  */
-/* OBSOLETE 		  bfd_get_section_contents (pbfd, section, buffer, fptr, */
-/* OBSOLETE 					    Count); */
-/* OBSOLETE  */
-/* OBSOLETE 		  err = UDIWrite ((UDIHostMemPtr) buffer,	/* From */ */
-/* OBSOLETE 				  To,	/* To */ */
-/* OBSOLETE 				  Count,	/* Count */ */
-/* OBSOLETE 				  (UDISizeT) 1,		/* Size */ */
-/* OBSOLETE 				  &Count,	/* CountDone */ */
-/* OBSOLETE 				  (UDIBool) 0);		/* HostEndian */ */
-/* OBSOLETE 		  if (err) */
-/* OBSOLETE 		    error ("UDIWrite failed, error = %d", err); */
-/* OBSOLETE  */
-/* OBSOLETE 		  To.Offset += Count; */
-/* OBSOLETE 		  fptr += Count; */
-/* OBSOLETE 		  section_size -= Count; */
-/* OBSOLETE 		} */
-/* OBSOLETE 	    } */
-/* OBSOLETE 	  else */
-/* OBSOLETE 	    /* BSS */ */
-/* OBSOLETE 	    { */
-/* OBSOLETE 	      UDIResource From; */
-/* OBSOLETE 	      unsigned long zero = 0; */
-/* OBSOLETE  */
-/* OBSOLETE 	      /* Write a zero byte at the vma */ */
-/* OBSOLETE 	      /* FIXME: Broken for sections of 1-3 bytes (we test for */
-/* OBSOLETE 	         zero above).  */ */
-/* OBSOLETE 	      err = UDIWrite ((UDIHostMemPtr) & zero,	/* From */ */
-/* OBSOLETE 			      To,	/* To */ */
-/* OBSOLETE 			      (UDICount) 1,	/* Count */ */
-/* OBSOLETE 			      (UDISizeT) 4,	/* Size */ */
-/* OBSOLETE 			      &Count,	/* CountDone */ */
-/* OBSOLETE 			      (UDIBool) 0);	/* HostEndian */ */
-/* OBSOLETE 	      if (err) */
-/* OBSOLETE 		error ("UDIWrite failed, error = %d", err); */
-/* OBSOLETE  */
-/* OBSOLETE 	      From = To; */
-/* OBSOLETE 	      To.Offset += 4; */
-/* OBSOLETE  */
-/* OBSOLETE 	      /* Now, duplicate it for the length of the BSS */ */
-/* OBSOLETE 	      err = UDICopy (From,	/* From */ */
-/* OBSOLETE 			     To,	/* To */ */
-/* OBSOLETE 			     (UDICount) (section_size / 4 - 1),		/* Count */ */
-/* OBSOLETE 			     (UDISizeT) 4,	/* Size */ */
-/* OBSOLETE 			     &Count,	/* CountDone */ */
-/* OBSOLETE 			     (UDIBool) 1);	/* Direction */ */
-/* OBSOLETE 	      if (err) */
-/* OBSOLETE 		{ */
-/* OBSOLETE 		  char message[100]; */
-/* OBSOLETE 		  int xerr; */
-/* OBSOLETE  */
-/* OBSOLETE 		  xerr = UDIGetErrorMsg (err, 100, message, &Count); */
-/* OBSOLETE 		  if (!xerr) */
-/* OBSOLETE 		    fprintf_unfiltered (gdb_stderr, "Error is %s\n", message); */
-/* OBSOLETE 		  else */
-/* OBSOLETE 		    fprintf_unfiltered (gdb_stderr, "xerr is %d\n", xerr); */
-/* OBSOLETE 		  error ("UDICopy failed, error = %d", err); */
-/* OBSOLETE 		} */
-/* OBSOLETE 	    } */
-/* OBSOLETE  */
-/* OBSOLETE 	} */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   entry.Space = UDI29KIRAMSpace; */
-/* OBSOLETE   entry.Offset = bfd_get_start_address (pbfd); */
-/* OBSOLETE  */
-/* OBSOLETE   immediate_quit--; */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /* Function to download an image into the remote target.  */ */
-/* OBSOLETE  */
-/* OBSOLETE static void */
-/* OBSOLETE udi_load (char *args, int from_tty) */
-/* OBSOLETE { */
-/* OBSOLETE   download (args, from_tty); */
-/* OBSOLETE  */
-/* OBSOLETE   /* As a convenience, pick up any symbol info that is in the program */
-/* OBSOLETE      being loaded.  Note that we assume that the program is the``mainline''; */
-/* OBSOLETE      if this is not always true, then this code will need to be augmented.  */ */
-/* OBSOLETE   symbol_file_add (strtok (args, " \t"), from_tty, NULL, 1, 0); */
-/* OBSOLETE  */
-/* OBSOLETE   /* Getting new symbols may change our opinion about what is */
-/* OBSOLETE      frameless.  */ */
-/* OBSOLETE   reinit_frame_cache (); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /*************************************************** UDI_WRITE_INFERIOR_MEMORY */
-/* OBSOLETE ** Copy LEN bytes of data from debugger memory at MYADDR */
-/* OBSOLETE    to inferior's memory at MEMADDR.  Returns number of bytes written.  */ */
-/* OBSOLETE static int */
-/* OBSOLETE udi_write_inferior_memory (CORE_ADDR memaddr, char *myaddr, int len) */
-/* OBSOLETE { */
-/* OBSOLETE   int nwritten = 0; */
-/* OBSOLETE   UDIUInt32 *From; */
-/* OBSOLETE   UDIResource To; */
-/* OBSOLETE   UDICount Count; */
-/* OBSOLETE   UDISizeT Size = 1; */
-/* OBSOLETE   UDICount CountDone = 0; */
-/* OBSOLETE   UDIBool HostEndian = 0; */
-/* OBSOLETE  */
-/* OBSOLETE   To.Space = udi_memory_space (memaddr); */
-/* OBSOLETE   From = (UDIUInt32 *) myaddr; */
-/* OBSOLETE  */
-/* OBSOLETE   while (nwritten < len) */
-/* OBSOLETE     { */
-/* OBSOLETE       Count = len - nwritten; */
-/* OBSOLETE       if (Count > MAXDATA) */
-/* OBSOLETE 	Count = MAXDATA; */
-/* OBSOLETE       To.Offset = memaddr + nwritten; */
-/* OBSOLETE       if (UDIWrite (From, To, Count, Size, &CountDone, HostEndian)) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  error ("UDIWrite() failed in udi_write_inferior_memory"); */
-/* OBSOLETE 	  break; */
-/* OBSOLETE 	} */
-/* OBSOLETE       else */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  nwritten += CountDone; */
-/* OBSOLETE 	  From += CountDone; */
-/* OBSOLETE 	} */
-/* OBSOLETE     } */
-/* OBSOLETE   return (nwritten); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /**************************************************** UDI_READ_INFERIOR_MEMORY */
-/* OBSOLETE ** Read LEN bytes from inferior memory at MEMADDR.  Put the result */
-/* OBSOLETE    at debugger address MYADDR.  Returns number of bytes read.  */ */
-/* OBSOLETE static int */
-/* OBSOLETE udi_read_inferior_memory (CORE_ADDR memaddr, char *myaddr, int len) */
-/* OBSOLETE { */
-/* OBSOLETE   int nread = 0; */
-/* OBSOLETE   UDIResource From; */
-/* OBSOLETE   UDIUInt32 *To; */
-/* OBSOLETE   UDICount Count; */
-/* OBSOLETE   UDISizeT Size = 1; */
-/* OBSOLETE   UDICount CountDone = 0; */
-/* OBSOLETE   UDIBool HostEndian = 0; */
-/* OBSOLETE   UDIError err; */
-/* OBSOLETE  */
-/* OBSOLETE   From.Space = udi_memory_space (memaddr); */
-/* OBSOLETE   To = (UDIUInt32 *) myaddr; */
-/* OBSOLETE  */
-/* OBSOLETE   while (nread < len) */
-/* OBSOLETE     { */
-/* OBSOLETE       Count = len - nread; */
-/* OBSOLETE       if (Count > MAXDATA) */
-/* OBSOLETE 	Count = MAXDATA; */
-/* OBSOLETE       From.Offset = memaddr + nread; */
-/* OBSOLETE       if (err = UDIRead (From, To, Count, Size, &CountDone, HostEndian)) */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  error ("UDIRead() failed in udi_read_inferior_memory"); */
-/* OBSOLETE 	  break; */
-/* OBSOLETE 	} */
-/* OBSOLETE       else */
-/* OBSOLETE 	{ */
-/* OBSOLETE 	  nread += CountDone; */
-/* OBSOLETE 	  To += CountDone; */
-/* OBSOLETE 	} */
-/* OBSOLETE     } */
-/* OBSOLETE   return (nread); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE /********************************************************************* WARNING */
-/* OBSOLETE */ */
-/* OBSOLETE udi_warning (int num) */
-/* OBSOLETE { */
-/* OBSOLETE   error ("ERROR while loading program into remote TIP: $d\n", num); */
-/* OBSOLETE } */
-/* OBSOLETE  */
-/* OBSOLETE  */
-/* OBSOLETE /*****************************************************************************/ */
-/* OBSOLETE /* Fetch a single register indicatated by 'regno'.  */
-/* OBSOLETE  * Returns 0/-1 on success/failure.   */
-/* OBSOLETE  */ */
-/* OBSOLETE static void */
-/* OBSOLETE fetch_register (int regno) */
-/* OBSOLETE { */
-/* OBSOLETE   UDIResource From; */
-/* OBSOLETE   UDIUInt32 To; */
-/* OBSOLETE   UDICount Count = 1; */
-/* OBSOLETE   UDISizeT Size = 4; */
-/* OBSOLETE   UDICount CountDone; */
-/* OBSOLETE   UDIBool HostEndian = 0; */
-/* OBSOLETE   UDIError err; */
-/* OBSOLETE   int result; */
-/* OBSOLETE  */
-/* OBSOLETE   if (regno == GR1_REGNUM) */
-/* OBSOLETE     { */
-/* OBSOLETE       From.Space = UDI29KGlobalRegs; */
-/* OBSOLETE       From.Offset = 1; */
-/* OBSOLETE     } */
-/* OBSOLETE   else if (regno >= GR96_REGNUM && regno < GR96_REGNUM + 32) */
-/* OBSOLETE     { */
-/* OBSOLETE       From.Space = UDI29KGlobalRegs; */
-/* OBSOLETE       From.Offset = (regno - GR96_REGNUM) + 96;; */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE #if defined(GR64_REGNUM) */
-/* OBSOLETE  */
-/* OBSOLETE   else if (regno >= GR64_REGNUM && regno < GR64_REGNUM + 32) */
-/* OBSOLETE     { */
-/* OBSOLETE       From.Space = UDI29KGlobalRegs; */
-/* OBSOLETE       From.Offset = (regno - GR64_REGNUM) + 64; */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE #endif /* GR64_REGNUM */ */
-/* OBSOLETE  */
-/* OBSOLETE   else if (regno >= LR0_REGNUM && regno < LR0_REGNUM + 128) */
-/* OBSOLETE     { */
-/* OBSOLETE       From.Space = UDI29KLocalRegs; */
-/* OBSOLETE       From.Offset = (regno - LR0_REGNUM); */
-/* OBSOLETE     } */
-/* OBSOLETE   else if (regno >= FPE_REGNUM && regno <= EXO_REGNUM) */
-/* OBSOLETE     { */
-/* OBSOLETE       int val = -1; */
-/* OBSOLETE       /*supply_register(160 + (regno - FPE_REGNUM),(char *) &val); */ */
-/* OBSOLETE       supply_register (regno, (char *) &val); */
-/* OBSOLETE       return;			/* Pretend Success */ */
-/* OBSOLETE     } */
-/* OBSOLETE   else */
-/* OBSOLETE     { */
-/* OBSOLETE       From.Space = UDI29KSpecialRegs; */
-/* OBSOLETE       From.Offset = regnum_to_srnum (regno); */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   if (err = UDIRead (From, &To, Count, Size, &CountDone, HostEndian)) */
-/* OBSOLETE     error ("UDIRead() failed in udi_fetch_registers"); */
-/* OBSOLETE  */
-/* OBSOLETE   supply_register (regno, (char *) &To); */
-/* OBSOLETE  */
-/* OBSOLETE   if (remote_debug) */
-/* OBSOLETE     fprintf_unfiltered (gdb_stdlog, "Fetching register %s = 0x%x\n", */
-/* OBSOLETE 			REGISTER_NAME (regno), To); */
-/* OBSOLETE } */
-/* OBSOLETE /*****************************************************************************/ */
-/* OBSOLETE /* Store a single register indicated by 'regno'.  */
-/* OBSOLETE  * Returns 0/-1 on success/failure.   */
-/* OBSOLETE  */ */
-/* OBSOLETE static int */
-/* OBSOLETE store_register (int regno) */
-/* OBSOLETE { */
-/* OBSOLETE   int result; */
-/* OBSOLETE   UDIUInt32 From; */
-/* OBSOLETE   UDIResource To; */
-/* OBSOLETE   UDICount Count = 1; */
-/* OBSOLETE   UDISizeT Size = 4; */
-/* OBSOLETE   UDICount CountDone; */
-/* OBSOLETE   UDIBool HostEndian = 0; */
-/* OBSOLETE  */
-/* OBSOLETE   From = read_register (regno);	/* get data value */ */
-/* OBSOLETE  */
-/* OBSOLETE   if (remote_debug) */
-/* OBSOLETE     fprintf_unfiltered (gdb_stdlog, "Storing register %s = 0x%x\n", */
-/* OBSOLETE 			REGISTER_NAME (regno), From); */
-/* OBSOLETE  */
-/* OBSOLETE   if (regno == GR1_REGNUM) */
-/* OBSOLETE     { */
-/* OBSOLETE       To.Space = UDI29KGlobalRegs; */
-/* OBSOLETE       To.Offset = 1; */
-/* OBSOLETE       result = UDIWrite (&From, To, Count, Size, &CountDone, HostEndian); */
-/* OBSOLETE       /* Setting GR1 changes the numbers of all the locals, so invalidate the  */
-/* OBSOLETE        * register cache.  Do this *after* calling read_register, because we want  */
-/* OBSOLETE        * read_register to return the value that write_register has just stuffed  */
-/* OBSOLETE        * into the registers array, not the value of the register fetched from  */
-/* OBSOLETE        * the inferior.   */
-/* OBSOLETE        */ */
-/* OBSOLETE       registers_changed (); */
-/* OBSOLETE     } */
-/* OBSOLETE #if defined(GR64_REGNUM) */
-/* OBSOLETE   else if (regno >= GR64_REGNUM && regno < GR64_REGNUM + 32) */
-/* OBSOLETE     { */
-/* OBSOLETE       To.Space = UDI29KGlobalRegs; */
-/* OBSOLETE       To.Offset = (regno - GR64_REGNUM) + 64; */
-/* OBSOLETE       result = UDIWrite (&From, To, Count, Size, &CountDone, HostEndian); */
-/* OBSOLETE     } */
-/* OBSOLETE #endif /* GR64_REGNUM */ */
-/* OBSOLETE   else if (regno >= GR96_REGNUM && regno < GR96_REGNUM + 32) */
-/* OBSOLETE     { */
-/* OBSOLETE       To.Space = UDI29KGlobalRegs; */
-/* OBSOLETE       To.Offset = (regno - GR96_REGNUM) + 96; */
-/* OBSOLETE       result = UDIWrite (&From, To, Count, Size, &CountDone, HostEndian); */
-/* OBSOLETE     } */
-/* OBSOLETE   else if (regno >= LR0_REGNUM && regno < LR0_REGNUM + 128) */
-/* OBSOLETE     { */
-/* OBSOLETE       To.Space = UDI29KLocalRegs; */
-/* OBSOLETE       To.Offset = (regno - LR0_REGNUM); */
-/* OBSOLETE       result = UDIWrite (&From, To, Count, Size, &CountDone, HostEndian); */
-/* OBSOLETE     } */
-/* OBSOLETE   else if (regno >= FPE_REGNUM && regno <= EXO_REGNUM) */
-/* OBSOLETE     return 0;			/* Pretend Success */ */
-/* OBSOLETE   else if (regno == PC_REGNUM) */
-/* OBSOLETE     { */
-/* OBSOLETE       /* PC1 via UDI29KPC */ */
-/* OBSOLETE  */
-/* OBSOLETE       To.Space = UDI29KPC; */
-/* OBSOLETE       To.Offset = 0;		/* PC1 */ */
-/* OBSOLETE       result = UDIWrite (&From, To, Count, Size, &CountDone, HostEndian); */
-/* OBSOLETE  */
-/* OBSOLETE       /* Writing to this loc actually changes the values of pc0 & pc1 */ */
-/* OBSOLETE  */
-/* OBSOLETE       register_valid[PC_REGNUM] = 0;	/* pc1 */ */
-/* OBSOLETE       register_valid[NPC_REGNUM] = 0;	/* pc0 */ */
-/* OBSOLETE     } */
-/* OBSOLETE   else */
-/* OBSOLETE     /* An unprotected or protected special register */ */
-/* OBSOLETE     { */
-/* OBSOLETE       To.Space = UDI29KSpecialRegs; */
-/* OBSOLETE       To.Offset = regnum_to_srnum (regno); */
-/* OBSOLETE       result = UDIWrite (&From, To, Count, Size, &CountDone, HostEndian); */
-/* OBSOLETE     } */
-/* OBSOLETE  */
-/* OBSOLETE   if (result != 0) */
-/* OBSOLETE     error ("UDIWrite() failed in store_registers"); */
-/* OBSOLETE  */
-/* OBSOLETE   return 0; */
-/* OBSOLETE } */
-/* OBSOLETE /********************************************************** REGNUM_TO_SRNUM */ */
-/* OBSOLETE /*  */
-/* OBSOLETE  * Convert a gdb special register number to a 29000 special register number. */
-/* OBSOLETE  */ */
-/* OBSOLETE static int */
-/* OBSOLETE regnum_to_srnum (int regno) */
-/* OBSOLETE { */
-/* OBSOLETE   switch (regno) */
-/* OBSOLETE     { */
-/* OBSOLETE     case VAB_REGNUM: */
-/* OBSOLETE       return (0); */
-/* OBSOLETE     case OPS_REGNUM: */
-/* OBSOLETE       return (1); */
-/* OBSOLETE     case CPS_REGNUM: */
-/* OBSOLETE       return (2); */
-/* OBSOLETE     case CFG_REGNUM: */
-/* OBSOLETE       return (3); */
-/* OBSOLETE     case CHA_REGNUM: */
-/* OBSOLETE       return (4); */
-/* OBSOLETE     case CHD_REGNUM: */
-/* OBSOLETE       return (5); */
-/* OBSOLETE     case CHC_REGNUM: */
-/* OBSOLETE       return (6); */
-/* OBSOLETE     case RBP_REGNUM: */
-/* OBSOLETE       return (7); */
-/* OBSOLETE     case TMC_REGNUM: */
-/* OBSOLETE       return (8); */
-/* OBSOLETE     case TMR_REGNUM: */
-/* OBSOLETE       return (9); */
-/* OBSOLETE     case NPC_REGNUM: */
-/* OBSOLETE       return (USE_SHADOW_PC ? (20) : (10)); */
-/* OBSOLETE     case PC_REGNUM: */
-/* OBSOLETE       return (USE_SHADOW_PC ? (21) : (11)); */
-/* OBSOLETE     case PC2_REGNUM: */
-/* OBSOLETE       return (USE_SHADOW_PC ? (22) : (12)); */
-/* OBSOLETE     case MMU_REGNUM: */
-/* OBSOLETE       return (13); */
-/* OBSOLETE     case LRU_REGNUM: */
-/* OBSOLETE       return (14); */
-/* OBSOLETE     case IPC_REGNUM: */
-/* OBSOLETE       return (128); */
-/* OBSOLETE     case IPA_REGNUM: */
-/* OBSOLETE       return (129); */
-/* OBSOLETE     case IPB_REGNUM: */
-/* OBSOLETE       return (130); */
-/* OBSOLETE     case Q_REGNUM: */
-/* OBSOLETE       return (131); */
-/* OBSOLETE     case ALU_REGNUM: */
-/* OBSOLETE       return (132); */
-/* OBSOLETE     case BP_REGNUM: */
-/* OBSOLETE       return (133); */
-/* OBSOLETE     case FC_REGNUM: */
-/* OBSOLETE       return (134); */
-/* OBSOLETE     case CR_REGNUM: */
-/* OBSOLETE       return (135); */
-/* OBSOLETE     case FPE_REGNUM: */
-/* OBSOLETE       return (160); */
-/* OBSOLETE     case INTE_REGNUM: */
-/* OBSOLETE       return (161); */
-/* OBSOLETE     case FPS_REGNUM: */
-/* OBSOLETE       return (162); */
-/* OBSOLETE     case EXO_REGNUM: */
-/* OBSOLETE       return (164); */
-/* OBSOLETE     default: */
-/* OBSOLETE       return (255);		/* Failure ? */ */
-/* OBSOLETE     } */
-/* OBSOLETE } */
-/* OBSOLETE /****************************************************************************/ */
-/* OBSOLETE /* */
-/* OBSOLETE  * Determine the Target memory space qualifier based on the addr.  */
-/* OBSOLETE  * FIXME: Can't distinguis I_ROM/D_ROM.   */
-/* OBSOLETE  * FIXME: Doesn't know anything about I_CACHE/D_CACHE. */
-/* OBSOLETE  */ */
-/* OBSOLETE static CPUSpace */
-/* OBSOLETE udi_memory_space (CORE_ADDR addr) */
-/* OBSOLETE { */
-/* OBSOLETE   UDIUInt32 tstart = IMemStart; */
-/* OBSOLETE   UDIUInt32 tend = tstart + IMemSize; */
-/* OBSOLETE   UDIUInt32 dstart = DMemStart; */
-/* OBSOLETE   UDIUInt32 dend = tstart + DMemSize; */
-/* OBSOLETE   UDIUInt32 rstart = RMemStart; */
-/* OBSOLETE   UDIUInt32 rend = tstart + RMemSize; */
-/* OBSOLETE  */
-/* OBSOLETE   if (((UDIUInt32) addr >= tstart) && ((UDIUInt32) addr < tend)) */
-/* OBSOLETE     { */
-/* OBSOLETE       return UDI29KIRAMSpace; */
-/* OBSOLETE     } */
-/* OBSOLETE   else if (((UDIUInt32) addr >= dstart) && ((UDIUInt32) addr < dend)) */
-/* OBSOLETE     { */
-/* OBSOLETE       return UDI29KDRAMSpace; */
-/* OBSOLETE     } */
-/* OBSOLETE   else if (((UDIUInt32) addr >= rstart) && ((UDIUInt32) addr < rend)) */
-/* OBSOLETE     { */
-/* OBSOLETE       /* FIXME: how do we determine between D_ROM and I_ROM */ */
-/* OBSOLETE       return UDI29KIROMSpace; */
-/* OBSOLETE     } */
-/* OBSOLETE   else				/* FIXME: what do me do now? */ */
-/* OBSOLETE     return UDI29KDRAMSpace;	/* Hmmm! */ */
-/* OBSOLETE } */
-/* OBSOLETE /*********************************************************************** STUBS */
-/* OBSOLETE */ */
-/* OBSOLETE  */
-/* OBSOLETE void */
-/* OBSOLETE convert16 (void) */
-/* OBSOLETE {; */
-/* OBSOLETE } */
-/* OBSOLETE void */
-/* OBSOLETE convert32 (void) */
-/* OBSOLETE {; */
-/* OBSOLETE } */
-/* OBSOLETE struct ui_file *EchoFile = 0;	/* used for debugging */ */
-/* OBSOLETE int QuietMode = 0;		/* used for debugging */ */
-/* OBSOLETE  */
-/* OBSOLETE #ifdef NO_HIF_SUPPORT */
-/* OBSOLETE service_HIF (union msg_t *msg) */
-/* OBSOLETE { */
-/* OBSOLETE   return (0);			/* Emulate a failure */ */
-/* OBSOLETE } */
-/* OBSOLETE #endif */
-/* OBSOLETE  */
-/* OBSOLETE /* Target_ops vector.  Not static because there does not seem to be */
-/* OBSOLETE    any portable way to do a forward declaration of a static variable. */
-/* OBSOLETE    The RS/6000 doesn't like "extern" followed by "static"; SunOS */
-/* OBSOLETE    /bin/cc doesn't like "static" twice.  */ */
-/* OBSOLETE  */
-/* OBSOLETE struct target_ops udi_ops; */
-/* OBSOLETE  */
-/* OBSOLETE static void */
-/* OBSOLETE init_udi_ops (void) */
-/* OBSOLETE { */
-/* OBSOLETE   udi_ops.to_shortname = "udi"; */
-/* OBSOLETE   udi_ops.to_longname = "Remote UDI connected TIP"; */
-/* OBSOLETE   udi_ops.to_doc = "Remote debug an AMD 29k using UDI socket connection to TIP process.\n\ */
-/* OBSOLETE Arguments are\n\ */
-/* OBSOLETE `configuration-id AF_INET hostname port-number'\n\ */
-/* OBSOLETE To connect via the network, where hostname and port-number specify the\n\ */
-/* OBSOLETE host and port where you can connect via UDI.\n\ */
-/* OBSOLETE configuration-id is unused.\n\ */
-/* OBSOLETE \n\ */
-/* OBSOLETE `configuration-id AF_UNIX socket-name tip-program'\n\ */
-/* OBSOLETE To connect using a local connection to the \"tip.exe\" program which is\n\ */
-/* OBSOLETE     supplied by AMD.  If socket-name specifies an AF_UNIX socket then the\n\ */
-/* OBSOLETE     tip program must already be started; connect to it using that socket.\n\ */
-/* OBSOLETE     If not, start up tip-program, which should be the name of the tip\n\ */
-/* OBSOLETE     program.  If appropriate, the PATH environment variable is searched.\n\ */
-/* OBSOLETE     configuration-id is unused.\n\ */
-/* OBSOLETE \n\ */
-/* OBSOLETE `configuration-id'\n\ */
-/* OBSOLETE     Look up the configuration in ./udi_soc or /etc/udi_soc, which\n\ */
-/* OBSOLETE     are files containing lines in the above formats.  configuration-id is\n\ */
-/* OBSOLETE     used to pick which line of the file to use."; */
-/* OBSOLETE   udi_ops.to_open = udi_open; */
-/* OBSOLETE   udi_ops.to_close = udi_close; */
-/* OBSOLETE   udi_ops.to_attach = udi_attach; */
-/* OBSOLETE   udi_ops.to_detach = udi_detach; */
-/* OBSOLETE   udi_ops.to_resume = udi_resume; */
-/* OBSOLETE   udi_ops.to_wait = udi_wait; */
-/* OBSOLETE   udi_ops.to_fetch_registers = udi_fetch_registers; */
-/* OBSOLETE   udi_ops.to_store_registers = udi_store_registers; */
-/* OBSOLETE   udi_ops.to_prepare_to_store = udi_prepare_to_store; */
-/* OBSOLETE   udi_ops.to_xfer_memory = udi_xfer_inferior_memory; */
-/* OBSOLETE   udi_ops.to_files_info = udi_files_info; */
-/* OBSOLETE   udi_ops.to_insert_breakpoint = udi_insert_breakpoint; */
-/* OBSOLETE   udi_ops.to_remove_breakpoint = udi_remove_breakpoint; */
-/* OBSOLETE   udi_ops.to_terminal_init = 0; */
-/* OBSOLETE   udi_ops.to_terminal_inferior = 0; */
-/* OBSOLETE   udi_ops.to_terminal_ours_for_output = 0; */
-/* OBSOLETE   udi_ops.to_terminal_ours = 0; */
-/* OBSOLETE   udi_ops.to_terminal_info = 0; */
-/* OBSOLETE   udi_ops.to_kill = udi_kill; */
-/* OBSOLETE   udi_ops.to_load = udi_load; */
-/* OBSOLETE   udi_ops.to_lookup_symbol = 0; */
-/* OBSOLETE   udi_ops.to_create_inferior = udi_create_inferior; */
-/* OBSOLETE   udi_ops.to_mourn_inferior = udi_mourn; */
-/* OBSOLETE   udi_ops.to_can_run = 0; */
-/* OBSOLETE   udi_ops.to_notice_signals = 0; */
-/* OBSOLETE   udi_ops.to_thread_alive = 0; */
-/* OBSOLETE   udi_ops.to_stop = 0; */
-/* OBSOLETE   udi_ops.to_stratum = process_stratum; */
-/* OBSOLETE   udi_ops.DONT_USE = 0; */
-/* OBSOLETE   udi_ops.to_has_all_memory = 1; */
-/* OBSOLETE   udi_ops.to_has_memory = 1; */
-/* OBSOLETE   udi_ops.to_has_stack = 1; */
-/* OBSOLETE   udi_ops.to_has_registers = 1; */
-/* OBSOLETE   udi_ops.to_has_execution = 1; */
-/* OBSOLETE   udi_ops.to_sections = 0; */
-/* OBSOLETE   udi_ops.to_sections_end = 0; */
-/* OBSOLETE   udi_ops.to_magic = OPS_MAGIC; */
-/* OBSOLETE }; */
-/* OBSOLETE  */
-/* OBSOLETE void */
-/* OBSOLETE _initialize_remote_udi (void) */
-/* OBSOLETE { */
-/* OBSOLETE   init_udi_ops (); */
-/* OBSOLETE   add_target (&udi_ops); */
-/* OBSOLETE } */