diff options
author | Michael Meissner <gnu@the-meissners.org> | 1996-04-04 20:03:33 +0000 |
---|---|---|
committer | Michael Meissner <gnu@the-meissners.org> | 1996-04-04 20:03:33 +0000 |
commit | 64646bd32b36195e8968088f68d8ac6ea1c68afb (patch) | |
tree | 1825bb4c9f56c6d1cd349499192285eeb54410df | |
parent | 4e956fd5e14c08aae98a7fcffb91f20164faa267 (diff) | |
download | gdb-64646bd32b36195e8968088f68d8ac6ea1c68afb.zip gdb-64646bd32b36195e8968088f68d8ac6ea1c68afb.tar.gz gdb-64646bd32b36195e8968088f68d8ac6ea1c68afb.tar.bz2 |
Doc fixes from Andrew
-rw-r--r-- | sim/ppc/ChangeLog | 9 | ||||
-rw-r--r-- | sim/ppc/INSTALL | 811 |
2 files changed, 820 insertions, 0 deletions
diff --git a/sim/ppc/ChangeLog b/sim/ppc/ChangeLog index 3fabbed..1a506b6 100644 --- a/sim/ppc/ChangeLog +++ b/sim/ppc/ChangeLog @@ -1,3 +1,12 @@ +Sun Mar 31 15:47:33 1996 Andrew Cagney <cagney@kremvax.highland.com.au> + + * INSTALL: Update to reflect gdb-4.16. + + * RUN: Update to reflect gdb-4.16. Review notes on building a BSD + runtime environment. + + * README: Point out copyright status of simulator in introduction. + Fri Mar 29 12:17:58 1996 Michael Meissner <meissner@tiktok.cygnus.com> * options.c (print_options): Print out WITH_STDIO. diff --git a/sim/ppc/INSTALL b/sim/ppc/INSTALL new file mode 100644 index 0000000..45cb64c --- /dev/null +++ b/sim/ppc/INSTALL @@ -0,0 +1,811 @@ + + PSIM - model the PowerPC environment + + Copyright (C) 1994-1996, Andrew Cagney <cagney@highland.com.au>. + + ---------------------------------------------------------------------- + + + Building PSIM + + This file describes how to build the program PSIM + + o Walk through a basic build + + o Discussion of PSIM's components and + how they relate to the build process + + o Detailed description of each of PSIM's + compile time configuration options + + + ---------------------------------------------------------------------- + + +BUILDING PSIM: + +PSIM 1.0.2 is included in GDB-4.16. To build PSIM you will need the +following: + + gdb-4.16.tar.gz Available from your favorite GNU + ftp site + + gcc GCC version two includes suport + for long long (64bit integer) + arrithemetic which PSIM uses. Hence + it is recommended that you build PSIM + using GCC. + +Method: + + 1. Unpack gdb + + $ cd .../scratch + $ gunzip < gdb-4.16.tar.gz | tar xf - + + + 2. Configure gdb + + First consult the gdb documentation + + $ cd .../scratch + $ cd gdb-4.16 + $ more README + $ more gdb/README + + then something like (I assume SH): + + $ CC=gcc ./configure \ + --enable-sim-powerpc \ + --target=powerpc-unknown-eabi \ + --prefix=/applications/psim + + + 4. Build (again specifying GCC) + + $ make CC=gcc + + alternatively, if you are short on disk space or only + want to build the simulator: + + $ ( cd libiberty && make CC=gcc ) + $ ( cd bfd && make CC=gcc ) + $ ( cd sim/ppc && make CC=gcc ) + + + 5. Install + + $ make CC=gcc install + + or just + + $ cp gdb/gdb ~/bin/powerpc-unknown-eabisim-gdb + $ cp sim/ppc/run ~/bin/powerpc-unknown-eabisim-run + + + ---------------------------------------------------------------------- + + +UPDATING PSIM: + + +A PSIM is an ongoing development. Occasional snapshots which both contain new features and fix old bugs are made available. See the ftp directory: + + ftp://ftp.ci.com.au/pub/psim/beta +or ftp://cambridge.cygnus.com/pub/psim/beta + +for the latest version. To build/install one of these snapshots, you +replace the sim/ppc found in the gdb archive with with one from the +snapshot. Then just re-configure and rebuild/install. + + Procedure: + + 0. A starting point + + $ cd gdb-4.16 + + + 1. Remove the old psim directory + + $ mv sim/ppc sim/old.ppc + + + 2. Unpack the new one + + $ gunzip < ../psim-NNNNNN.tar.gz | tar tf - + $ gunzip < ../psim-NNNNNN.tar.gz | tar tf - + + + 3. Reconfigure/rebuild (as seen above): + + $ CC=gcc ./configure \ + --enable-sim-powerpc \ + --target=powerpc-unknown-eabi \ + --prefix=/applications/psim + $ make CC=gcc + + + ---------------------------------------------------------------------- + + +UPDATES TO GDB: + +From time to time, problems involving the integration of PSIM into gdb +are found. While eventually each of these problems is resolved there +can be periouds during which a local hack may be needed. + +At the time of writing the following were outstanding: + + ATTACH command: + + ftp://ftp.ci.com.au/pub/psim/gdb-4.15+attach.diff.gz + or ftp://cambridge.cygnus.com/pub/psim/gdb-4.15+attach.diff.gz + + PSIM, unlike the other simulators found in GDB, is able to load + the description of a target machine (including the initial + state of all processor registers) from a file. + + Unfortunatly GDB does not yet have a standard command that + facilitates the use of this feature. Until such a command is + added, the patch (hack?) gdb-4.15+attach.diff.gz can be used to + extend GDB's attach command so that it can be used to initialize + the simulators configuration from a file. + + + + ---------------------------------------------------------------------- + + +RUNNING PROGRAMS: + + +See the file: + + ftp://ftp.ci.com.au/pub/psim/RUN +or ftp://cambridge.cygnus.com/pub/psim/RUN + + + ---------------------------------------------------------------------- + + +COMPILE TIME CONFIGURATION OPTIONS: + + +PSIM's compile time configuration is controlled by autoconf. PSIM's +configure script recognises options of the form: + + --enable-sim-<option>[=<val>] + +And can be specified on the configure command line (at the top level +of the gdb directory tree) vis: + + $ cd gdb-4.15 + $ CC=gcc ./configure \ + --target=powerpc-unknown-eabisim \ + --prefix=/applications/psim \ + --enable-sim-inline + $ make CC=gcc + +For a brief list of PSIM's configuration options, configure --help +will list them vis: + + $ cd sim/ppc + $ ./configure --help + +Each PSIM specific option is discussed in detail below. + + + +--enable-sim-cflags=<opts> + + +Specify additional C compiler flags that are to be used when compiling +just PSIM. + +PSIM places heavy demands on both the host machine and its C compiler. +So that the builder has better control over the compiler the above +option can be used to pass additional options to the compiler while PSIM is being built. + +Ex: No debug information + +PSIM can be built with everything inline. Unfortunately, because of +all the debugging information generated the C compiler can grow very +very large as a result. For GCC, the debug information can be +restricted with the `-g0' option. To specify that this option should +be include in the CFLAGS when compiling the psim source code use: + + --enable-sim-cflags=-g0 + +Ex: Additional optimization flags + +A significant gain in performance can be achieved by tuning the +optimization flags passed to the C compiler. For instance on an x86 +you may consider: + + --enable-sim-cflags='-g0 -O2 -fno-strength-reduce -f...' + + + +--enable-sim-warnings=<flags> + + +Turn on additional GCC specific checks. + +Some hosts (NetBSD, Linux, Solaris-2.5) have complete header files +that include correct prototypes for all library functions. On such +hosts, PSIM can be built with many more than the standard C checks +enabled. The option --enable-sim-warnings controls this. + +Ex: Default warnings + +With just --enable-sim-warnings, the following -W options are enabled: +-Werror -Wall -Wpointer-arith -Wmissing-prototypes. + + + +--enable-sim-opcode=which + + +Specify the file containing the rules for generating the instruction +decode and execute functions from the file ppc-instructions. + +The form of the instruction decode and execute functions is controlled +by an opcode table. It specifies: the combination of switch +statements and jump tables to use when decoding an instruction and how +much of each instruction should be decoded before calling the +instruction execute function. + +PSIM includes a number of opcode tables: + + psim-opcode-simple + Generates a small compact two level switch statement + that will compile quickly and run reasonably fast. + + This may be useful on a small machine. + + psim-opcode-complex + (the default) A fairly aggressive instruction decode + table that includes the breaking out of a number + of special instruction cases (eg RA==0 vs RA!=0). + + psim-opcode-flat + Identical to complex except a switch statement + is used. Ideal for when the icache is being + disabled. + + psim-opcode-stupid + In addition to the instruction decodes performed + by psim-opcode-complex, this also full decodes mtspr, + mfspr, and branch instructions. The table generated + is very large and, as a consequence, only performs + well on machines with large caches. + + ppc-opcode-test-1 + ppc-opcode-test-2 + Generate test (but workable) tables. These exercise + PSIM's ability to generate instruction decode functions + that are a combination of jump-tables and switch statements. + +The program igen generates the instruction tables from the opcode +table and the ppc-instruction table. + + + +--enable-sim-switch + + +Enable/disable the use of a switch statement when looking up the +attributes of a SPR register. + +The PowerPC architecture defines a number of Special Purpose Registers +(SPR's). Associated with each of these registers are a number of +attributes (such as validity or size) which the instructions +mtspr/mfspr query as part of their execution. + +For PSIM, this information is kept in a table (ppc-spr-table). The +program dgen converts this table into lookup routines (contained in +the generated files spreg.h spreg.c) that can be used to query an +SPR's attributes. Those lookup routines are either implemented as +a table or alternatively as a number of switch statements: + + spr_table spr_info[] = { .... }; + int spr_length(sprs spr) { return spr_info[spr].length; } + +vs + + int spr_length(sprs spr) { switch (spr) { case ..: return ..; } } + +In general the first implementation (a table) is the most efficient. +It may, however, prove that when performing an aggressive optimization +where both the SPR is known and the above function is being inlined +(with the consequence that GCC can eliminate the switch statement) +that the second choice is improves performance. + +In practice, only a marginal (if any benefit) has ever been seen. + + + +--enable-sim-duplicate + + +Create a duplicate copy of each instruction function hardwiring +instruction fields that would have otherwise have been variable. + +As discussed above, igen outputs a C function generated from the file +ppc-instructions (using the opcode rules) for each of the +instructions. Thus multiple entries in the instruction decode tables +may be pointing back at the same function. Enabling duplicate, will +result in psim creating a duplicate of the instruction's function for +each different entry in the instruction decode tables. + +For instance, given the branch instruction: + + 0.19,6.BO,11.BI,16./,21.528,31.LK + ... + if (LK) LR = (spreg)IEA(CIA + 4); + ... + +igen as part of its instruction lookup table may have generated two +different entries - one for LK=0 and one for LK=1. With duplicate +enabled, igen outputs (almost) duplicate copies of branch function, +one with LK hardwired to 0 and one with LK hardwired to 1. + +By doing this the compiler is provided with additional information that +will allow it possibly eliminate dead code. (such as the assignment +to LK if LR==0). + +Ex: default + +Because this feature is such a big win, --enable-sim-duplicate is +turned on by default. + +Ex: A small machine + +Only rarely (eg on a very small host) would this feature need to be +disabled (using: --disable-sim-duplicate). + + + +--enable-sim-filter=rule + + +Include/exclude PowerPC instructions that are specific to a particular +implementation. + +Some of the PowerPC instructions included in the file ppc-instructions +are limited to certain specific PPC implementations. For instance, +the instruction: + + 0.58,6.RT,11.RA,16.DS,30.2:DS:64::Load Word Algebraic + +Is only valid for the 64bit architecture. The enable-sim-filter flag +is passed to igen so that it can `filter out' any invalid +instructions. The filter rule has the form: + + -f <name> + +thus: + + --enable-sim-filter='-f 64' + +(the default) would filter out all 64bit instructions. + +Ex: Remove floating point instructions + +A given 32bit PowerPC implementation may not include floating point +hardware. Consequently there is little point in including floating +point instructions in the instruction table. The option: + + --enable-sim-filter='-f 64 -f f' + +will eliminate all floating point instructions from the instruction +table. + + + +--enable-sim-icache=size + + +Set the size of the cache used to hold decoded instructions. + +Psim executes instructions in two separate steps: + + o instruction fetch/decode + + o instruction execution + +For a given instruction, the first stage need only be executed once +(the first time the instruction is encountered) while the second stage +must be executed every time the program `executes' that instruction. + +Exploiting this, PSIM can maintain a cache of decoded instructions. +It will then use the decoded instruction from the cache in preference +to fetching/decoding the real instruction from memory. + +Ex: default + +Because this feature is normally such a big win, it is enabled by +default (with the cache size set to 1024 entries). + +The 1024 entries equals 4096 bytes (or one page) of instructions. +Larger caches can be used but with caution - PSIM does not check for +address aliasing within its instruction cache. + +Ex: disable the cache + +There may be cases (for instance where the cache has a low hit rate) +where the psim performs better with no instruction cache. For such +situations, the cache can be disabled vis: --disable-sim-icache. + + + +--enable-sim-inline[=module] + + +Specify the inlining of one or more modules. + +Many architectures (in particular the x86) suffer from a large +function call overhead. By eliminating function calls (through +inlining of functions) a large performance gain can be achieved. + +In PSIM, modules are inlined in one of two possible ways. Some +modules (such as the byte swapping code) can be inlined into any +module that calls them. Other modules, due to complex +interdependencies, are only inlined as a group when compiling the +external interface module psim.c. + +Ex: default + +By default the modules endian (handle be/le), bits (manipulate +bit-fields within words), cpu (the processor object) and events +(timers) are inlined in any module that calls them. This gives a +reasonable performance gain with little additional compilation +overhead. + +Ex: recommended --enable-sim-inline + +Assuming you machine is reasonably well configured, this option is +highly recommended. On the x86 several orders of magnitude +improvement in performance is possible. + +Ex: fine tuning + +The file std-config.h contains a detailed description of how the +inlining works. Individual modules can be inlined by specifying them. +For if you have a very large cache the model module could be inlined +with: + + --enable-sim-inline=MODEL + + + +--enable-sim-bswap + + +(x86 specific) Use the i486/P5/P6 byte swap instruction. + +PSIM contains generic byte swapping code. For the x86 (P[4-6]) PSIM +can be built so that it uses the bswap instruction instead of relying +on the compiler to generate byte swap code. + +Ex: default + +By default, when compiling with GCC-2 on an i486/P5/P6 the bswap +instruction is used. + + + +--enable-sim-endian=endian + + +Specify the byte order of the target. + +By default, PSIM is able to execute both big and little endian +executables. As a consequence, every byte swap routine includes a +test to see if the byte swap is really needed. By specifying the byte +order of the target (and the host below) the need for this test can be +eliminated. + +Clearly setting the byte order of the target is only useful when known +before hand. + + + +--enable-sim-hostendain=end + + +As above but for the host. + +Normally this option should not be needed. configure (autoconf) should +determine the byte order of the host automatically. However if for +some reason there is a problem, this option can be used to override +autoconf. + + + +--enable-sim-smp=n + + +Set the maximum number of processors that PSIM can model. + +Psim can model (with small limitation discussed else where) a +multi-processor PowerPC environment. While the overhead of +co-ordinating the execution of a number of processors is relatively +small it is still significant when compared to handling only one +processor. + +This option only sets the maximum number of processors that can be +simulated. The number active during a given simulation run us +determined at run time. + +Ex: default + +By default 5 processors are configured but only one is enabled. +Additional processors can be enabled with the runtime option: + + -o '/openprom/options/smp 5' + +Ex: recommended + +Unless you intend studying multi-processor systems there is little reason for having PSIM configured with SMP support. Specifying: + + --disable-sim-smp +or --enable-sim-smp=0 + +will eliminate any SMP such as: + + for (cpu = 0; cpu < nr_cpus; cpu++) + ... + + + +--enable-sim-xor-endian=n + + +Set the byte-size of the bus involved in the PowerPC's xor endian byte +swapping. + +The PowerPC's implementation of BE/LE mode is different to what a +programmer may first expect. The details of this implementation are +discussed at length in PowerPC documentation. + +Ex: default + +By default this is configured with a value of 8 (the bus size of most +60x processors). + +Ex: recommended + +Unless you are expecting to test/debug PowerPC be/le switching code +this option is of little use and should be disabled: + + --disable-sim-xor-endian + + + +--enable-sim-bitsize=n + + +Specify the bit size (32/64) of the PowerPC to be modelled. + +Note: By default 32 is specified. The implementation of the 64bit +architecture is still under development. + + +--enable-sim-hostbitsize=32|64 + +As above but for the host. + +NOTE: Psim has yet to be built on a 64bit host. + + + +--enable-sim-env=env + + +Hardwire the PowerPC environment being modelled (user, virtual or +operating). + +The PowerPC architecture defines three different levels of compliance +to its architectural specification. These environments are discussed in detail in PowerPC publications. + + user - normal user programs + virtual - an extension of the user environment (includes timers) + operating - kernel code + +Ex: default + +By default all three environments are supported. + +Ex: recommended + +If you only intend running psim with user (or operating) code then +PSIM should be configured accordingly. For user code, it eliminates: +support for timers and events and redundant VM calls. + + + +--enable-sim-timebase + + +Enable/disable the time base register. + +The PowerPC architecture (virtual environment) includes a time base +register. Maintaining that register incurs an overhead in +performance that can be eliminated by eliminating time-base register +support. + +Ex: default + +Normally this option is not used. Instead --enable-sim-env (above) us +used to disable/enable features such as the timebase register. + + + +--enable-sim-alignment=align + + +Control the PowerPC's memory access alignment restrictions. + +The PowerPC in LE mode only allows memory transfers of a correctly +aligned size/address. The above option controls how misaligned +accesses are handled. + + strict All accesses must be correctly aligned + + nonstrict Unaligned access allowed (the are split + into a number of aligned accesses). + +Ex: default + +Unless otherwise specified PSIM will auto configure a BE program to +allow miss-aligned accesses while a LE program will not. + +Ex: 604e + +The recently announced 604e processor allows miss-aligned accesses in both +BE and LE modes. If modeling the 604e then you should specify: + + --enable-sim-alignment=nonstrict + + + +--enable-sim-trace + + +Include code to trace PSIM's internal progress (also controlled by the +-t option). + +Checking to see if a trace message should be output slows down a +simulation. Disabling this option (--disable-sim-trace) eliminates +completely that code. + + + +--enable-sim-assert + + +Include the code that checks the correctness of parts of PSIM. + +Eliminating such code (--disable-sim-assert) eliminates internal +consistency tests and their overhead. + + + +--enable-sim-reserved-bits + + +Include code to check that the reserved fields of the instruction are +zero. + +The PowerPC architecture defines certain fields of some instructions +as reserved (`/'). By default, for each instruction, PSIM will check +the reserved fields causing an invalid instruction exception if a +field is invalid. Disabling this option eliminates this test. This +is at the slight risk of PSIM treating an invalid instruction as +valid. + + + +--enable-sim-float + + +Include support for hardware floating point. + + + +--enable-sim-monitor=mon + + +Include support for basic instruction counting. + +If you are not interested in the performance of either you program or +the simulator then you can disable this option. + + + +--enable-sim-model=which + +Hardwire the processor that will be used as a reference when modeling +execution units. + + + +--enable-sim-default-model=which + + +Specify the processor of choice for the execution unit model. + + + +--enable-sim-model-issue + + +Include support for the modeling of processor execution units. + + ---------------------------------------------------------------------- + +TYPICAL CONFIGURATION OPTIONS: + + + VEA CODE ONLY: + + Here of note are: + + o ramp up the compiler options (some + of the below are P5 specific). + + o disable anything not used + + CC=gcc ./configure \ + --prefix=/applications/psim \ + --target=powerpc-unknown-eabi \ + --enable-sim-powerpc \ + --enable-sim-warnings \ + --enable-sim-inline \ + --disable-sim-smp \ + --enable-sim-bswap \ + --enable-sim-duplicate \ + --enable-sim-endian=big \ + --disable-sim-xor-endian \ + --enable-sim-env=user \ + --disable-sim-reserved-bits \ + --disable-sim-assert \ + --disable-sim-trace \ + --enable-sim-cflags='-g0 -O2 -fno-strength-reduce -fomit-frame-pointer -malign-loops=2 -malign-jumps=2 -malign-functions=2' + + + OEA CODE ONLY: + + The key configuration changes are: + + o turn off the instruction cache. The overhead + of flushing and reloading it is greater than + not having a cache. + + o use a switch statement (ppc-opcode-flat) for + the instruction decode and then (-O3) fully + inline all functions. + + o --enable-sim-warnings is not present. GCC (2.7.2) + gets confused by the instruction decode table + generated by igen (contains a perfect switch) + and, as a consequence, generates a bogus warning. + + CC=gcc ./configure \ + --prefix=/applications/psim \ + --target=powerpc-unknown-eabi \ + --enable-sim-powerpc \ + --enable-sim-inline \ + --disable-sim-smp \ + --enable-sim-bswap \ + --enable-sim-duplicate \ + --enable-sim-endian=big \ + --disable-sim-xor-endian \ + --enable-sim-env=operating \ + --disable-sim-reserved-bits \ + --disable-sim-assert \ + --disable-sim-trace \ + --enable-sim-opcode=ppc-opcode-flat \ + --disable-sim-icache \ + --enable-sim-cflags='-g0 -O3 -fno-strength-reduce -fomit-frame-pointer -malign-loops=2 -malign-jumps=2 -malign-functions=2' |