aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorMichael Meissner <gnu@the-meissners.org>1996-12-10 16:12:48 +0000
committerMichael Meissner <gnu@the-meissners.org>1996-12-10 16:12:48 +0000
commit3fbe064171ca48e2fafad0a454f561c07aceef7a (patch)
tree202691d6e02f2d932b55f0c85055be6d696ecebe
parenta7dd20e8396ab9dd76ea22e0aed0bcda42b9bc54 (diff)
downloadgdb-3fbe064171ca48e2fafad0a454f561c07aceef7a.zip
gdb-3fbe064171ca48e2fafad0a454f561c07aceef7a.tar.gz
gdb-3fbe064171ca48e2fafad0a454f561c07aceef7a.tar.bz2
New revision from Andrew
-rw-r--r--sim/ppc/.Sanitize8
-rw-r--r--sim/ppc/configure.in592
-rw-r--r--sim/ppc/hw_glue.c371
-rw-r--r--sim/ppc/hw_ide.c869
-rw-r--r--sim/ppc/hw_opic.c1827
-rw-r--r--sim/ppc/hw_pic.c98
-rw-r--r--sim/ppc/hw_trace.c108
-rw-r--r--sim/ppc/tree.h139
8 files changed, 3635 insertions, 377 deletions
diff --git a/sim/ppc/.Sanitize b/sim/ppc/.Sanitize
index 59e646f..c9239bf 100644
--- a/sim/ppc/.Sanitize
+++ b/sim/ppc/.Sanitize
@@ -96,13 +96,17 @@ hw_cpu.c
hw_cpu.h
hw_disk.c
hw_eeprom.c
+hw_glue.c
hw_htab.c
+hw_ide.c
hw_init.c
hw_iobus.c
hw_memory.c
hw_nvram.c
+hw_opic.c
hw_pal.c
-hw_pic.c
+hw_phb.c
+hw_phb.h
hw_register.c
hw_trace.c
hw_vm.c
@@ -158,6 +162,8 @@ sim_calls.c
std-config.h
table.c
table.h
+tree.c
+tree.h
vm.c
vm.h
vm_n.h
diff --git a/sim/ppc/configure.in b/sim/ppc/configure.in
index 7662740..fa6ae13 100644
--- a/sim/ppc/configure.in
+++ b/sim/ppc/configure.in
@@ -13,6 +13,55 @@ else
CC_FOR_BUILD=gcc
fi
+
+AC_ARG_ENABLE(sim-alignment,
+[ --enable-sim-alignment=align Specify strict or nonstrict alignment.],
+[case "${enableval}" in
+ yes | strict | STRICT) sim_alignment="-DWITH_ALIGNMENT=STRICT_ALIGNMENT";;
+ no | nonstrict | NONSTRICT) sim_alignment="-DWITH_ALIGNMENT=NONSTRICT_ALIGNMENT";;
+ 0 | default | DEFAULT) sim_alignment="-DWITH_ALIGNMENT=0";;
+ *) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-alignment"); sim_alignment="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_alignment" != x""; then
+ echo "Setting alignment flags = $sim_alignment" 6>&1
+fi],[sim_alignment=""])dnl
+
+
+AC_ARG_ENABLE(sim-assert,
+[ --enable-sim-assert Specify whether to perform random assertions.],
+[case "${enableval}" in
+ yes) sim_assert="-DWITH_ASSERT=1";;
+ no) sim_assert="-DWITH_ASSERT=0";;
+ *) AC_MSG_ERROR("--enable-sim-assert does not take a value"); sim_assert="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_assert" != x""; then
+ echo "Setting assert flags = $sim_assert" 6>&1
+fi],[sim_assert=""])dnl
+
+
+AC_ARG_ENABLE(sim-bitsize,
+[ --enable-sim-bitsize=n Specify target bitsize (32 or 64).],
+[case "${enableval}" in
+ 32|64) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=$enableval";;
+ *) AC_MSG_ERROR("--enable-sim-bitsize was given $enableval. Expected 32 or 64"); sim_bitsize="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_bitsize" != x""; then
+ echo "Setting bitsize flags = $sim_bitsize" 6>&1
+fi],[sim_bitsize=""])dnl
+
+
+AC_ARG_ENABLE(sim-bswap,
+[ --enable-sim-bswap Use the BSWAP instruction on Intel 486s and Pentiums.],
+[case "${enableval}" in
+ yes) sim_bswap="-DWITH_BSWAP=1";;
+ no) sim_bswap="-DWITH_BSWAP=0";;
+ *) AC_MSG_ERROR("--enable-sim-bswap does not take a value"); sim_bswap="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
+ echo "Setting bswap flags = $sim_bswap" 6>&1
+fi],[sim_bswap=""])dnl
+
+
AC_ARG_ENABLE(sim-cflags,
[ --enable-sim-cflags=opts Extra CFLAGS for use in building simulator],
[case "${enableval}" in
@@ -24,27 +73,6 @@ if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then
echo "Setting sim cflags = $sim_cflags" 6>&1
fi],[sim_cflags=""])dnl
-AC_ARG_ENABLE(sim-warnings,
-[ --enable-sim-warnings=opts Extra CFLAGS for turning on compiler warnings except for idecode.o, semantics.o and psim.o],
-[case "${enableval}" in
- yes) sim_warnings="-Werror -Wall -Wpointer-arith -Wmissing-prototypes";;
- no) sim_warnings="-w";;
- *) sim_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
-esac
-if test x"$silent" != x"yes" && test x"$sim_warnings" != x""; then
- echo "Setting warning flags = $sim_warnings" 6>&1
-fi],[sim_warnings=""])dnl
-
-AC_ARG_ENABLE(sim-line-nr,
-[ --enable-sim-line-nr=opts Generate extra CPP code that references source rather than generated code],
-[case "${enableval}" in
- yes) sim_line_nr="";;
- no) sim_line_nr="-L";;
- *) AC_MSG_ERROR("--enable-sim-line-nr does not take a value"); sim_line_nr="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_line_nr" != x""; then
- echo "Setting warning flags = $sim_line_nr" 6>&1
-fi],[sim_line_nr=""])dnl
AC_ARG_ENABLE(sim-config,
[ --enable-sim-config=file Override default config file],
@@ -66,39 +94,17 @@ if test x"$silent" != x"yes"; then
echo "Setting config flags = $sim_config" 6>&1
fi])dnl
-AC_ARG_ENABLE(sim-opcode,
-[ --enable-sim-opcode=which Override default opcode lookup.],
-[case "${enableval}" in
- yes|no) AC_MSG_ERROR("No value supplied for --enable-sim-opcode=file");;
- *) if test -f "${srcdir}/${enableval}"; then
- sim_opcode="${enableval}"
- elif test -f "${srcdir}/ppc-opcode-${enableval}"; then
- sim_opcode="ppc-opcode-${enableval}"
- else
- AC_MSG_ERROR("File $enableval is not an opcode rules file");
- sim_opcode="ppc-opcode-complex"
- fi;;
-esac
-if test x"$silent" != x"yes" && test x"$sim_opcode" != x""; then
- echo "Setting opcode flags = $sim_opcode" 6>&1
-fi],[sim_opcode="ppc-opcode-complex"
-if test x"$silent" != x"yes"; then
- echo "Setting opcode flags = $sim_opcode"
-fi])dnl
-AC_ARG_ENABLE(sim-switch,
-[ --enable-sim-switch Use a switch instead of a table for instruction call.],
+AC_ARG_ENABLE(sim-default-model,
+[ --enable-sim-default-model=which Specify default PowerPC to model.],
[case "${enableval}" in
- yes) sim_switch="-s";;
- no) sim_switch="";;
- *) AC_MSG_ERROR("--enable-sim-switch does not take a value"); sim_switch="";;
+ yes|no) AC_MSG_ERROR("No value supplied for --enable-sim-default-model=model");;
+ *) sim_default_model="-DWITH_DEFAULT_MODEL=${enableval}";;
esac
-if test x"$silent" != x"yes" && test x"$sim_switch" != x""; then
- echo "Setting switch flags = $sim_switch" 6>&1
-fi],[sim_switch="";
-if test x"$silent" != x"yes"; then
- echo "Setting switch flags = $sim_switch" 6>&1
-fi])dnl
+if test x"$silent" != x"yes" && test x"$sim_default_model" != x""; then
+ echo "Setting default-model flags = $sim_default_model" 6>&1
+fi],[sim_model=""])dnl
+
AC_ARG_ENABLE(sim-duplicate,
[ --enable-sim-duplicate Expand (duplicate) semantic functions.],
@@ -114,19 +120,38 @@ if test x"$silent" != x"yes"; then
echo "Setting duplicate flags = $sim_dup" 6>&1
fi])dnl
-AC_ARG_ENABLE(sim-jump,
-[ --enable-sim-jump Jump between semantic code (instead of call/return).],
+
+AC_ARG_ENABLE(sim-endian,
+[ --enable-sim-endian=endian Specify target byte endian orientation.],
[case "${enableval}" in
- yes) sim_jump="-J";;
- no) sim_jump="";;
- *) AC_MSG_ERROR("--enable-sim-jump does not take a value"); sim_jump="";;
+ yes) case "$target" in
+ *powerpc-*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
+ *powerpcle-*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
+ *) echo "Unknown target $target" 1>&6; sim_endian="-DWITH_TARGET_BYTE_ORDER=0";;
+ esac;;
+ no) sim_endian="-DWITH_TARGET_BYTE_ORDER=0";;
+ b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
+ l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
+ *) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-endian"); sim_endian="";;
esac
-if test x"$silent" != x"yes" && test x"$sim_jump" != x""; then
- echo "Setting jump flag = $sim_jump" 6>&1
-fi],[sim_jump="-E"
-if test x"$silent" != x"yes"; then
- echo "Setting jump flag = $sim_jump" 6>&1
-fi])dnl
+if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
+ echo "Setting endian flags = $sim_endian" 6>&1
+fi],[sim_endian=""])dnl
+
+
+AC_ARG_ENABLE(sim-env,
+[ --enable-sim-env=env Specify target environment (operating, virtual, user).],
+[case "${enableval}" in
+ operating | os | oea) sim_env="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
+ virtual | vea) sim_env="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
+ user | uea) sim_env="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
+ no) sim_env="-DWITH_ENVIRONMENT=0";;
+ *) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-env"); sim_env="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_env" != x""; then
+ echo "Setting env flags = $sim_env" 6>&1
+fi],[sim_env=""])dnl
+
AC_ARG_ENABLE(sim-filter,
[ --enable-sim-filter=rule Specify filter rules.],
@@ -142,6 +167,75 @@ if test x"$silent" != x"yes"; then
echo "Setting filter flags = $sim_filter" 6>&1
fi])dnl
+
+AC_ARG_ENABLE(sim-float,
+[ --enable-sim-float Specify whether to use host floating point or simulate.],
+[case "${enableval}" in
+ yes | hard) sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT";;
+ no | soft) sim_float="-DWITH_FLOATING_POINT=SOFT_FLOATING_POINT";;
+ *) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-float"); sim_float="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_float" != x""; then
+ echo "Setting float flags = $sim_float" 6>&1
+fi],[sim_float=""])dnl
+
+
+AC_ARG_ENABLE(sim-hardware,
+[ --enable-sim-hardware=list Specify the hardware to be included in the build.],
+[hardware="cpu,memory,nvram,iobus,htab,disk,trace,register,vm,init,core,pal,com,eeprom,opic,glue,phb,ide"
+case "${enableval}" in
+ yes) ;;
+ no) AC_MSG_ERROR("List of hardware must be specified for --enable-sim-hardware"); hardware="";;
+ ,*) hardware="${hardware}${enableval}";;
+ *,) hardware="${enableval}${hardware}";;
+ *) hardware="${enableval}"'';;
+esac
+sim_hw_src=`echo $hardware | sed -e 's/,/.c hw_/g' -e 's/^/hw_/' -e s'/$/.c/'`
+sim_hw_obj=`echo $sim_hw_src | sed -e 's/\.c/.o/g'`
+if test x"$silent" != x"yes" && test x"$hardware" != x""; then
+ echo "Setting hardware to $sim_hw_src, $sim_hw_obj"
+fi],[hardware="cpu,memory,nvram,iobus,htab,disk,trace,register,vm,init,core,pal,com,eeprom,opic,glue,phb,ide"
+sim_hw_src=`echo $hardware | sed -e 's/,/.c hw_/g' -e 's/^/hw_/' -e s'/$/.c/'`
+sim_hw_obj=`echo $sim_hw_src | sed -e 's/\.c/.o/g'`
+if test x"$silent" != x"yes"; then
+ echo "Setting hardware to $sim_hw_src, $sim_hw_obj"
+fi])dnl
+
+
+AC_ARG_ENABLE(sim-hostbitsize,
+[ --enable-sim-hostbitsize=32|64 Specify host bitsize (32 or 64).],
+[case "${enableval}" in
+ 32|64) sim_hostbitsize="-DWITH_HOST_WORD_BITSIZE=$enableval";;
+ *) AC_MSG_ERROR("--enable-sim-hostbitsize was given $enableval. Expected 32 or 64"); sim_hostbitsize="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_hostbitsize" != x""; then
+ echo "Setting hostbitsize flags = $sim_hostbitsize" 6>&1
+fi],[sim_hostbitsize=""])dnl
+
+
+AC_ARG_ENABLE(sim-hostendian,
+[ --enable-sim-hostendain=end Specify host byte endian orientation.],
+[case "${enableval}" in
+ no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
+ b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
+ l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
+ *) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-hostendian"); sim_hostendian="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
+ echo "Setting hostendian flags = $sim_hostendian" 6>&1
+fi],[
+if test "x$cross_compiling" = "xno"; then
+ AC_C_BIGENDIAN
+ if test $ac_cv_c_bigendian = yes; then
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
+ else
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
+ fi
+else
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
+fi])dnl
+
+
AC_ARG_ENABLE(sim-icache,
[ --enable-sim-icache=size Specify instruction cache size.],
[icache=""
@@ -168,46 +262,6 @@ if test x"$silent" != x"yes"; then
echo "Setting instruction cache size to 1024 ($sim_icache)"
fi])dnl
-AC_ARG_ENABLE(sim-hardware,
-[ --enable-sim-hardware=list Specify the hardware to be included in the build.],
-[hardware="cpu,memory,nvram,iobus,htab,disk,trace,register,vm,init,core,pal,com"
-case "${enableval}" in
- yes) ;;
- no) AC_MSG_ERROR("List of hardware must be specified for --enable-sim-hardware"); hardware="";;
- ,*) hardware="${hardware}${enableval}";;
- *) hardware="${enableval}";;
-esac
-sim_hw_src=`echo $hardware | sed -e 's/,/.c hw_/g' -e 's/^/hw_/' -e s'/$/.c/'`
-sim_hw_obj=`echo $sim_hw_src | sed -e 's/\.c/.o/g'`
-if test x"$silent" != x"yes" && test x"$hardware" != x""; then
- echo "Setting hardware to $sim_hw_src, $sim_hw_obj"
-fi],[hardware="cpu,memory,nvram,iobus,htab,disk,trace,register,vm,init,core,pal,com"
-sim_hw_src=`echo $hardware | sed -e 's/,/.c hw_/g' -e 's/^/hw_/' -e s'/$/.c/'`
-sim_hw_obj=`echo $sim_hw_src | sed -e 's/\.c/.o/g'`
-if test x"$silent" != x"yes"; then
- echo "Setting hardware to $sim_hw_src, $sim_hw_obj"
-fi])dnl
-
-
-AC_ARG_ENABLE(sim-packages,
-[ --enable-sim-packages=list Specify the packages to be included in the build.],
-[packages=disklabel
-case "${enableval}" in
- yes) ;;
- no) AC_MSG_ERROR("List of packages must be specified for --enable-sim-packages"); packages="";;
- ,*) packages="${packages}${enableval}";;
- *) packages="${enableval}"''
-esac
-sim_pk_src=`echo $packages | sed -e 's/,/.c pk_/g' -e 's/^/pk_/' -e 's/$/.c/'`
-sim_pk_obj=`echo $sim_pk_src | sed -e 's/\.c/.o/g'`
-if test x"$silent" != x"yes" && test x"$packages" != x""; then
- echo "Setting packages to $sim_pk_src, $sim_pk_obj"
-fi],[packages=disklabel
-sim_pk_src=`echo $packages | sed -e 's/,/.c pk_/g' -e 's/^/pk_/' -e 's/$/.c/'`
-sim_pk_obj=`echo $sim_pk_src | sed -e 's/\.c/.o/g'`
-if test x"$silent" != x"yes"; then
- echo "Setting packages to $sim_pk_src, $sim_pk_obj"
-fi])dnl
AC_ARG_ENABLE(sim-inline,
[ --enable-sim-inline=inlines Specify which functions should be inlined.],
@@ -243,33 +297,113 @@ else
sim_inline=""
fi])dnl
-AC_ARG_ENABLE(sim-bswap,
-[ --enable-sim-bswap Use the BSWAP instruction on Intel 486s and Pentiums.],
+
+AC_ARG_ENABLE(sim-jump,
+[ --enable-sim-jump Jump between semantic code (instead of call/return).],
[case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1";;
- no) sim_bswap="-DWITH_BSWAP=0";;
- *) AC_MSG_ERROR("--enable-sim-bswap does not take a value"); sim_bswap="";;
+ yes) sim_jump="-J";;
+ no) sim_jump="";;
+ *) AC_MSG_ERROR("--enable-sim-jump does not take a value"); sim_jump="";;
esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi],[sim_bswap=""])dnl
+if test x"$silent" != x"yes" && test x"$sim_jump" != x""; then
+ echo "Setting jump flag = $sim_jump" 6>&1
+fi],[sim_jump="-E"
+if test x"$silent" != x"yes"; then
+ echo "Setting jump flag = $sim_jump" 6>&1
+fi])dnl
-AC_ARG_ENABLE(sim-endian,
-[ --enable-sim-endian=endian Specify target byte endian orientation.],
+
+AC_ARG_ENABLE(sim-line-nr,
+[ --enable-sim-line-nr=opts Generate extra CPP code that references source rather than generated code],
[case "${enableval}" in
- yes) case "$target" in
- *powerpc-*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
- *powerpcle-*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
- *) echo "Unknown target $target" 1>&6; sim_endian="-DWITH_TARGET_BYTE_ORDER=0";;
- esac;;
- no) sim_endian="-DWITH_TARGET_BYTE_ORDER=0";;
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
- *) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-endian"); sim_endian="";;
+ yes) sim_line_nr="";;
+ no) sim_line_nr="-L";;
+ *) AC_MSG_ERROR("--enable-sim-line-nr does not take a value"); sim_line_nr="";;
esac
-if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
- echo "Setting endian flags = $sim_endian" 6>&1
-fi],[sim_endian=""])dnl
+if test x"$silent" != x"yes" && test x"$sim_line_nr" != x""; then
+ echo "Setting warning flags = $sim_line_nr" 6>&1
+fi],[sim_line_nr=""])dnl
+
+
+AC_ARG_ENABLE(sim-model,
+[ --enable-sim-model=which Specify PowerPC to model.],
+[case "${enableval}" in
+ yes|no) AC_MSG_ERROR("No value supplied for --enable-sim-model=model");;
+ *) sim_model="-DWITH_MODEL=${enableval}";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_model" != x""; then
+ echo "Setting model flags = $sim_model" 6>&1
+fi],[sim_model=""])dnl
+
+
+AC_ARG_ENABLE(sim-model-issue,
+[ --enable-sim-model-issue Specify whether to simulate model specific actions],
+[case "${enableval}" in
+ yes) sim_model_issue="-DWITH_MODEL_ISSUE=MODEL_ISSUE_PROCESS";;
+ no) sim_model_issue="-DWITH_MODEL_ISSUE=MODEL_ISSUE_IGNORE";;
+ *) AC_MSG_ERROR("--enable-sim-model-issue does not take a value"); sim_model_issue="";;
+esac
+if test x"$silent" != x"yes"; then
+ echo "Setting model-issue flags = $sim_model_issue" 6>&1
+fi],[sim_model_issue=""])dnl
+
+
+AC_ARG_ENABLE(sim-monitor,
+[ --enable-sim-monitor=mon Specify whether to enable monitoring events.],
+[case "${enableval}" in
+ yes) sim_monitor="-DWITH_MON='MONITOR_INSTRUCTION_ISSUE | MONITOR_LOAD_STORE_UNIT'";;
+ no) sim_monitor="-DWITH_MON=0";;
+ instruction) sim_monitor="-DWITH_MON=MONITOR_INSTRUCTION_ISSUE";;
+ memory) sim_monitor="-DWITH_MON=MONITOR_LOAD_STORE_UNIT";;
+ *) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-mon"); sim_env="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_monitor" != x""; then
+ echo "Setting monitor flags = $sim_monitor" 6>&1
+fi],[sim_monitor=""])dnl
+
+
+AC_ARG_ENABLE(sim-opcode,
+[ --enable-sim-opcode=which Override default opcode lookup.],
+[case "${enableval}" in
+ yes|no) AC_MSG_ERROR("No value supplied for --enable-sim-opcode=file");;
+ *) if test -f "${srcdir}/${enableval}"; then
+ sim_opcode="${enableval}"
+ elif test -f "${srcdir}/ppc-opcode-${enableval}"; then
+ sim_opcode="ppc-opcode-${enableval}"
+ else
+ AC_MSG_ERROR("File $enableval is not an opcode rules file");
+ sim_opcode="ppc-opcode-complex"
+ fi;;
+esac
+if test x"$silent" != x"yes" && test x"$sim_opcode" != x""; then
+ echo "Setting opcode flags = $sim_opcode" 6>&1
+fi],[sim_opcode="ppc-opcode-complex"
+if test x"$silent" != x"yes"; then
+ echo "Setting opcode flags = $sim_opcode"
+fi])dnl
+
+
+AC_ARG_ENABLE(sim-packages,
+[ --enable-sim-packages=list Specify the packages to be included in the build.],
+[packages=disklabel
+case "${enableval}" in
+ yes) ;;
+ no) AC_MSG_ERROR("List of packages must be specified for --enable-sim-packages"); packages="";;
+ ,*) packages="${packages}${enableval}";;
+ *,) packages="${enableval}${packages}";;
+ *) packages="${enableval}"'';;
+esac
+sim_pk_src=`echo $packages | sed -e 's/,/.c pk_/g' -e 's/^/pk_/' -e 's/$/.c/'`
+sim_pk_obj=`echo $sim_pk_src | sed -e 's/\.c/.o/g'`
+if test x"$silent" != x"yes" && test x"$packages" != x""; then
+ echo "Setting packages to $sim_pk_src, $sim_pk_obj"
+fi],[packages=disklabel
+sim_pk_src=`echo $packages | sed -e 's/,/.c pk_/g' -e 's/^/pk_/' -e 's/$/.c/'`
+sim_pk_obj=`echo $sim_pk_src | sed -e 's/\.c/.o/g'`
+if test x"$silent" != x"yes"; then
+ echo "Setting packages to $sim_pk_src, $sim_pk_obj"
+fi])dnl
+
AC_ARG_ENABLE(sim-regparm,
[ --enable-sim-regparm=nr-parm Pass parameters in registers instead of on the stack - x86/GCC specific.],
@@ -283,39 +417,18 @@ if test x"$silent" != x"yes" && test x"$sim_regparm" != x""; then
echo "Setting regparm flags = $sim_regparm" 6>&1
fi],[sim_regparm=""])dnl
-AC_ARG_ENABLE(sim-stdcall,
-[ --enable-sim-stdcall=type Use an alternative function call/return mechanism - x86/GCC specific.],
-[case "${enableval}" in
- no) sim_stdcall="" ;;
- std*) sim_stdcall="-DWITH_STDCALL=1";;
- yes) sim_stdcall="-DWITH_STDCALL=1";;
- *) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-stdcall"); sim_stdcall="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_stdcall" != x""; then
- echo "Setting function call flags = $sim_stdcall" 6>&1
-fi],[sim_stdcall=""])dnl
-AC_ARG_ENABLE(sim-hostendian,
-[ --enable-sim-hostendain=end Specify host byte endian orientation.],
+AC_ARG_ENABLE(sim-reserved-bits,
+[ --enable-sim-reserved-bits Specify whether to check reserved bits in instruction.],
[case "${enableval}" in
- no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
- b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
- *) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-hostendian"); sim_hostendian="";;
+ yes) sim_reserved="-DWITH_RESERVED_BITS=1";;
+ no) sim_reserved="-DWITH_RESERVED_BITS=0";;
+ *) AC_MSG_ERROR("--enable-sim-reserved-bits does not take a value"); sim_reserved="";;
esac
-if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
- echo "Setting hostendian flags = $sim_hostendian" 6>&1
-fi],[
-if test "x$cross_compiling" = "xno"; then
- AC_C_BIGENDIAN
- if test $ac_cv_c_bigendian = yes; then
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
- else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
- fi
-else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
-fi])dnl
+if test x"$silent" != x"yes" && test x"$sim_reserved" != x""; then
+ echo "Setting reserved flags = $sim_reserved" 6>&1
+fi],[sim_reserved=""])dnl
+
AC_ARG_ENABLE(sim-smp,
[ --enable-sim-smp=n Specify number of processors to configure for.],
@@ -331,49 +444,46 @@ if test x"$silent" != x"yes"; then
echo "Setting smp flags = $sim_smp" 6>&1
fi])dnl
-AC_ARG_ENABLE(sim-xor-endian,
-[ --enable-sim-xor-endian=n Specify number bytes involved in PowerPC XOR bi-endian mode (default 8).],
-[case "${enableval}" in
- yes) sim_xor_endian="-DWITH_XOR_ENDIAN=8";;
- no) sim_xor_endian="-DWITH_XOR_ENDIAN=0";;
- *) sim_xor_endian="-DWITH_XOR_ENDIAN=$enableval";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_xor_endian" != x""; then
- echo "Setting xor-endian flag = $sim_xor_endian" 6>&1
-fi],[sim_xor_endian=""])dnl
-AC_ARG_ENABLE(sim-bitsize,
-[ --enable-sim-bitsize=n Specify target bitsize (32 or 64).],
+AC_ARG_ENABLE(sim-stdcall,
+[ --enable-sim-stdcall=type Use an alternative function call/return mechanism - x86/GCC specific.],
[case "${enableval}" in
- 32|64) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=$enableval";;
- *) AC_MSG_ERROR("--enable-sim-bitsize was given $enableval, expected 32 or 64"); sim_bitsize="";;
+ no) sim_stdcall="" ;;
+ std*) sim_stdcall="-DWITH_STDCALL=1";;
+ yes) sim_stdcall="-DWITH_STDCALL=1";;
+ *) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-stdcall"); sim_stdcall="";;
esac
-if test x"$silent" != x"yes" && test x"$sim_bitsize" != x""; then
- echo "Setting bitsize flags = $sim_bitsize" 6>&1
-fi],[sim_bitsize=""])dnl
+if test x"$silent" != x"yes" && test x"$sim_stdcall" != x""; then
+ echo "Setting function call flags = $sim_stdcall" 6>&1
+fi],[sim_stdcall=""])dnl
-AC_ARG_ENABLE(sim-hostbitsize,
-[ --enable-sim-hostbitsize=32|64 Specify host bitsize (32 or 64).],
+
+AC_ARG_ENABLE(sim-stdio,
+[ --enable-sim-stdio Specify whether to use stdio for console input/output.],
[case "${enableval}" in
- 32|64) sim_hostbitsize="-DWITH_HOST_WORD_BITSIZE=$enableval";;
- *) AC_MSG_ERROR("--enable-sim-hostbitsize was given $enableval, expected 32 or 64"); sim_hostbitsize="";;
+ yes) sim_stdio="-DWITH_STDIO=DO_USE_STDIO";;
+ no) sim_stdio="-DWITH_STDIO=DONT_USE_STDIO";;
+ *) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-stdio"); sim_stdio="";;
esac
-if test x"$silent" != x"yes" && test x"$sim_hostbitsize" != x""; then
- echo "Setting hostbitsize flags = $sim_hostbitsize" 6>&1
-fi],[sim_hostbitsize=""])dnl
+if test x"$silent" != x"yes" && test x"$sim_stdio" != x""; then
+ echo "Setting stdio flags = $sim_stdio" 6>&1
+fi],[sim_stdio=""])dnl
-AC_ARG_ENABLE(sim-env,
-[ --enable-sim-env=env Specify target environment (operating, virtual, user).],
+
+AC_ARG_ENABLE(sim-switch,
+[ --enable-sim-switch Use a switch instead of a table for instruction call.],
[case "${enableval}" in
- operating | os | oea) sim_env="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
- virtual | vea) sim_env="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
- user | uea) sim_env="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
- no) sim_env="-DWITH_ENVIRONMENT=0";;
- *) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-env"); sim_env="";;
+ yes) sim_switch="-s";;
+ no) sim_switch="";;
+ *) AC_MSG_ERROR("--enable-sim-switch does not take a value"); sim_switch="";;
esac
-if test x"$silent" != x"yes" && test x"$sim_env" != x""; then
- echo "Setting env flags = $sim_env" 6>&1
-fi],[sim_env=""])dnl
+if test x"$silent" != x"yes" && test x"$sim_switch" != x""; then
+ echo "Setting switch flags = $sim_switch" 6>&1
+fi],[sim_switch="";
+if test x"$silent" != x"yes"; then
+ echo "Setting switch flags = $sim_switch" 6>&1
+fi])dnl
+
AC_ARG_ENABLE(sim-timebase,
[ --enable-sim-timebase Specify whether the PPC timebase is supported.],
@@ -386,17 +496,6 @@ if test x"$silent" != x"yes" && test x"$sim_timebase" != x""; then
echo "Setting timebase flags = $sim_timebase" 6>&1
fi],[sim_timebase=""])dnl
-AC_ARG_ENABLE(sim-alignment,
-[ --enable-sim-alignment=align Specify strict or nonstrict alignment.],
-[case "${enableval}" in
- yes | strict | STRICT) sim_alignment="-DWITH_ALIGNMENT=STRICT_ALIGNMENT";;
- no | nonstrict | NONSTRICT) sim_alignment="-DWITH_ALIGNMENT=NONSTRICT_ALIGNMENT";;
- 0 | default | DEFAULT) sim_alignment="-DWITH_ALIGNMENT=0";;
- *) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-alignment"); sim_alignment="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_alignment" != x""; then
- echo "Setting alignment flags = $sim_alignment" 6>&1
-fi],[sim_alignment=""])dnl
AC_ARG_ENABLE(sim-trace,
[ --enable-sim-trace Specify whether tracing is supported.],
@@ -409,93 +508,30 @@ if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then
echo "Setting trace flags = $sim_trace" 6>&1
fi],[sim_trace=""])dnl
-AC_ARG_ENABLE(sim-assert,
-[ --enable-sim-assert Specify whether to perform random assertions.],
-[case "${enableval}" in
- yes) sim_assert="-DWITH_ASSERT=1";;
- no) sim_assert="-DWITH_ASSERT=0";;
- *) AC_MSG_ERROR("--enable-sim-assert does not take a value"); sim_assert="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_assert" != x""; then
- echo "Setting assert flags = $sim_assert" 6>&1
-fi],[sim_assert=""])dnl
-
-AC_ARG_ENABLE(sim-reserved-bits,
-[ --enable-sim-reserved-bits Specify whether to check reserved bits in instruction.],
-[case "${enableval}" in
- yes) sim_reserved="-DWITH_RESERVED_BITS=1";;
- no) sim_reserved="-DWITH_RESERVED_BITS=0";;
- *) AC_MSG_ERROR("--enable-sim-reserved-bits does not take a value"); sim_reserved="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_reserved" != x""; then
- echo "Setting reserved flags = $sim_reserved" 6>&1
-fi],[sim_reserved=""])dnl
-
-AC_ARG_ENABLE(sim-float,
-[ --enable-sim-float Specify whether to use host floating point or simulate.],
-[case "${enableval}" in
- yes | hard) sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT";;
- no | soft) sim_float="-DWITH_FLOATING_POINT=SOFT_FLOATING_POINT";;
- *) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-float"); sim_float="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_float" != x""; then
- echo "Setting float flags = $sim_float" 6>&1
-fi],[sim_float=""])dnl
-
-AC_ARG_ENABLE(sim-monitor,
-[ --enable-sim-monitor=mon Specify whether to enable monitoring events.],
-[case "${enableval}" in
- yes) sim_monitor="-DWITH_MON='MONITOR_INSTRUCTION_ISSUE | MONITOR_LOAD_STORE_UNIT'";;
- no) sim_monitor="-DWITH_MON=0";;
- instruction) sim_monitor="-DWITH_MON=MONITOR_INSTRUCTION_ISSUE";;
- memory) sim_monitor="-DWITH_MON=MONITOR_LOAD_STORE_UNIT";;
- *) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-mon"); sim_env="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_monitor" != x""; then
- echo "Setting monitor flags = $sim_monitor" 6>&1
-fi],[sim_monitor=""])dnl
-AC_ARG_ENABLE(sim-model,
-[ --enable-sim-model=which Specify PowerPC to model.],
+AC_ARG_ENABLE(sim-warnings,
+[ --enable-sim-warnings=opts Extra CFLAGS for turning on compiler warnings except for idecode.o, semantics.o and psim.o],
[case "${enableval}" in
- yes|no) AC_MSG_ERROR("No value supplied for --enable-sim-model=model");;
- *) sim_model="-DWITH_MODEL=${enableval}";;
+ yes) sim_warnings="-Werror -Wall -Wpointer-arith -Wmissing-prototypes -Wmissing-declarations ";;
+ no) sim_warnings="-w";;
+ *) sim_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
esac
-if test x"$silent" != x"yes" && test x"$sim_model" != x""; then
- echo "Setting model flags = $sim_model" 6>&1
-fi],[sim_model=""])dnl
+if test x"$silent" != x"yes" && test x"$sim_warnings" != x""; then
+ echo "Setting warning flags = $sim_warnings" 6>&1
+fi],[sim_warnings=""])dnl
-AC_ARG_ENABLE(sim-default-model,
-[ --enable-sim-default-model=which Specify default PowerPC to model.],
-[case "${enableval}" in
- yes|no) AC_MSG_ERROR("No value supplied for --enable-sim-default-model=model");;
- *) sim_default_model="-DWITH_DEFAULT_MODEL=${enableval}";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_default_model" != x""; then
- echo "Setting default-model flags = $sim_default_model" 6>&1
-fi],[sim_model=""])dnl
-AC_ARG_ENABLE(sim-model-issue,
-[ --enable-sim-model-issue Specify whether to simulate model specific actions],
+AC_ARG_ENABLE(sim-xor-endian,
+[ --enable-sim-xor-endian=n Specify number bytes involved in PowerPC XOR bi-endian mode (default 8).],
[case "${enableval}" in
- yes) sim_model_issue="-DWITH_MODEL_ISSUE=MODEL_ISSUE_PROCESS";;
- no) sim_model_issue="-DWITH_MODEL_ISSUE=MODEL_ISSUE_IGNORE";;
- *) AC_MSG_ERROR("--enable-sim-model-issue does not take a value"); sim_model_issue="";;
+ yes) sim_xor_endian="-DWITH_XOR_ENDIAN=8";;
+ no) sim_xor_endian="-DWITH_XOR_ENDIAN=0";;
+ *) sim_xor_endian="-DWITH_XOR_ENDIAN=$enableval";;
esac
-if test x"$silent" != x"yes"; then
- echo "Setting model-issue flags = $sim_model_issue" 6>&1
-fi],[sim_model_issue=""])dnl
+if test x"$silent" != x"yes" && test x"$sim_xor_endian" != x""; then
+ echo "Setting xor-endian flag = $sim_xor_endian" 6>&1
+fi],[sim_xor_endian=""])dnl
-AC_ARG_ENABLE(sim-stdio,
-[ --enable-sim-stdio Specify whether to use stdio for console input/output.],
-[case "${enableval}" in
- yes) sim_stdio="-DWITH_STDIO=DO_USE_STDIO";;
- no) sim_stdio="-DWITH_STDIO=DONT_USE_STDIO";;
- *) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-stdio"); sim_stdio="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_stdio" != x""; then
- echo "Setting stdio flags = $sim_stdio" 6>&1
-fi],[sim_stdio=""])dnl
AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/../..)
AC_CANONICAL_SYSTEM
diff --git a/sim/ppc/hw_glue.c b/sim/ppc/hw_glue.c
new file mode 100644
index 0000000..d7ad929
--- /dev/null
+++ b/sim/ppc/hw_glue.c
@@ -0,0 +1,371 @@
+/* This file is part of the program psim.
+
+ Copyright (C) 1994-1996, Andrew Cagney <cagney@highland.com.au>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+ */
+
+
+#ifndef _HW_GLUE_C_
+#define _HW_GLUE_C_
+
+#include "device_table.h"
+
+
+/* DEVICE
+
+
+ glue - glue to interconnect and test interrupts
+
+
+ DESCRIPTION
+
+
+ The glue device provides two functions. Firstly, it provides a
+ mechanism for inspecting and driving the interrupt net. Secondly,
+ it provides a set of boolean primitives that can be used add
+ combinatorial operations to the interrupt network.
+
+ Glue devices have a variable number of big endian <<output>>
+ registers. Each host-word size. The registers can be both read
+ and written.
+
+ Writing a value to an output register causes an interrupt (of the
+ specified level) to be driven on the devices corresponding output
+ interrupt port.
+
+ Reading an <<output>> register returns either the last value
+ written or the most recently computed value (for that register) as
+ a result of an interrupt ariving (which ever was computed last).
+
+ At present the following sub device types are available:
+
+ <<glue>>: In addition to driving its output interrupt port with any
+ value written to an interrupt input port is stored in the
+ corresponding <<output>> register. Such input interrupts, however,
+ are not propogated to an output interrupt port.
+
+ <<glue-and>>: The bit-wise AND of the interrupt inputs is computed
+ and then both stored in <<output>> register zero and propogated to
+ output interrupt output port zero.
+
+
+ PROPERTIES
+
+
+ reg = <address> <size> (required)
+
+ Specify the address (within the parent bus) that this device is to
+ live. The address must be 2048 * sizeof(word) (8k in a 32bit
+ simulation) aligned.
+
+
+ interrupt-ranges = <int-number> <range> (optional)
+
+ If present, this specifies the number of valid interrupt inputs (up
+ to the maximum of 2048). By default, <<int-number>> is zero and
+ range is determined by the <<reg>> size.
+
+
+ EXAMPLES
+
+
+ Enable tracing of the device:
+
+ | -t glue-device \
+
+
+ Create source, bitwize-and, and sink glue devices. Since the
+ device at address <<0x10000>> is of size <<8>> it will have two
+ output interrupt ports.
+
+ | -o '/iobus@0xf0000000/glue@0x10000/reg 0x10000 8' \
+ | -o '/iobus@0xf0000000/glue-and@0x20000/reg 0x20000 4' \
+ | -o '/iobus@0xf0000000/glue-and/interrupt-ranges 0 2' \
+ | -o '/iobus@0xf0000000/glue@0x30000/reg 0x30000 4' \
+
+
+ Wire the two source interrupts to the AND device:
+
+ | -o '/iobus@0xf0000000/glue@0x10000 > 0 0 /iobus/glue-and' \
+ | -o '/iobus@0xf0000000/glue@0x10000 > 1 1 /iobus/glue-and' \
+
+
+ Wire the AND device up to the sink so that the and's output is not
+ left open.
+
+ | -o '/iobus@0xf0000000/glue-and > 0 0 /iobus/glue@0x30000' \
+
+
+ With the above configuration. The client program is able to
+ compute a two bit AND. For instance the <<C>> stub below prints 1
+ AND 0.
+
+ | unsigned *input = (void*)0xf0010000;
+ | unsigned *output = (void*)0xf0030000;
+ | unsigned ans;
+ | input[0] = htonl(1);
+ | input[1] = htonl(0);
+ | ans = ntohl(*output);
+ | write_string("AND is ");
+ | write_int(ans);
+ | write_line();
+
+
+ BUGS
+
+
+ A future implementation of this device may support multiple
+ interrupt ranges.
+
+ Some of the devices listed may not yet be fully implemented.
+
+ Additional devices such as a dff, an inverter or a latch may be
+ useful.
+
+ */
+
+
+enum {
+ max_nr_interrupts = 2048,
+};
+
+typedef enum _hw_glue_type {
+ glue_undefined = 0,
+ glue_io,
+ glue_and,
+ glue_nand,
+ glue_or,
+ glue_xor,
+ glue_nor,
+ glue_not,
+} hw_glue_type;
+
+typedef struct _hw_glue_device {
+ hw_glue_type type;
+ int int_number;
+ int *input;
+ int nr_inputs;
+ unsigned sizeof_input;
+ /* our output registers */
+ int space;
+ unsigned_word address;
+ unsigned sizeof_output;
+ int *output;
+ int nr_outputs;
+} hw_glue_device;
+
+
+static void
+hw_glue_init_address(device *me)
+{
+ hw_glue_device *glue = (hw_glue_device*)device_data(me);
+
+ /* attach to my parent */
+ generic_device_init_address(me);
+
+ /* establish the output registers */
+ if (glue->output != NULL) {
+ memset(glue->output, 0, glue->sizeof_output);
+ }
+ else {
+ reg_property_spec unit;
+ int reg_nr;
+ /* find a relevant reg entry */
+ reg_nr = 0;
+ while (device_find_reg_array_property(me, "reg", reg_nr, &unit)
+ && !device_size_to_attach_size(device_parent(me), &unit.size,
+ &glue->sizeof_output, me))
+ reg_nr++;
+ /* check out the size */
+ if (glue->sizeof_output == 0)
+ device_error(me, "at least one reg property size must be nonzero");
+ if (glue->sizeof_output % sizeof(unsigned_word) != 0)
+ device_error(me, "reg property size must be %d aligned", sizeof(unsigned_word));
+ /* and the address */
+ device_address_to_attach_address(device_parent(me),
+ &unit.address, &glue->space, &glue->address,
+ me);
+ if (glue->address % (sizeof(unsigned_word) * max_nr_interrupts) != 0)
+ device_error(me, "reg property address must be %d aligned",
+ sizeof(unsigned_word) * max_nr_interrupts);
+ glue->nr_outputs = glue->sizeof_output / sizeof(unsigned_word);
+ glue->output = zalloc(glue->sizeof_output);
+ }
+
+ /* establish the input interrupt ports */
+ if (glue->input != NULL) {
+ memset(glue->input, 0, glue->sizeof_input);
+ }
+ else {
+ const device_property *ranges = device_find_property(me, "interrupt-ranges");
+ if (ranges == NULL) {
+ glue->int_number = 0;
+ glue->nr_inputs = glue->nr_outputs;
+ }
+ else if (ranges->sizeof_array != sizeof(unsigned_cell) * 2) {
+ device_error(me, "invalid interrupt-ranges property (incorrect size)");
+ }
+ else {
+ const unsigned_cell *int_range = ranges->array;
+ glue->int_number = BE2H_cell(int_range[0]);
+ glue->nr_inputs = BE2H_cell(int_range[1]);
+ }
+ glue->sizeof_input = glue->nr_inputs * sizeof(unsigned);
+ glue->input = zalloc(glue->sizeof_input);
+ }
+
+ /* determine our type */
+ if (glue->type == glue_undefined) {
+ const char *name = device_name(me);
+ if (strcmp(name, "glue") == 0)
+ glue->type = glue_io;
+ else if (strcmp(name, "glue-and") == 0)
+ glue->type = glue_and;
+ else
+ device_error(me, "unimplemented glue type");
+ }
+
+ DTRACE(glue, ("int-number %d, nr_inputs %d, nr_outputs %d\n",
+ glue->int_number, glue->nr_inputs, glue->nr_outputs));
+}
+
+static unsigned
+hw_glue_io_read_buffer_callback(device *me,
+ void *dest,
+ int space,
+ unsigned_word addr,
+ unsigned nr_bytes,
+ cpu *processor,
+ unsigned_word cia)
+{
+ hw_glue_device *glue = (hw_glue_device*)device_data(me);
+ int reg = ((addr - glue->address) / sizeof(unsigned_word)) % glue->nr_outputs;
+ if (nr_bytes != sizeof(unsigned_word)
+ || (addr % sizeof(unsigned_word)) != 0)
+ device_error(me, "missaligned read access (%d:0x%lx:%d) not supported",
+ space, (unsigned long)addr, nr_bytes);
+ *(unsigned_word*)dest = H2BE_4(glue->output[reg]);
+ DTRACE(glue, ("read - interrupt %d (0x%lx), level %d\n",
+ reg, (unsigned long) addr, glue->output[reg]));
+ return nr_bytes;
+}
+
+
+static unsigned
+hw_glue_io_write_buffer_callback(device *me,
+ const void *source,
+ int space,
+ unsigned_word addr,
+ unsigned nr_bytes,
+ cpu *processor,
+ unsigned_word cia)
+{
+ hw_glue_device *glue = (hw_glue_device*)device_data(me);
+ int reg = ((addr - glue->address) / sizeof(unsigned_word)) % max_nr_interrupts;
+ if (nr_bytes != sizeof(unsigned_word)
+ || (addr % sizeof(unsigned_word)) != 0)
+ device_error(me, "missaligned write access (%d:0x%lx:%d) not supported",
+ space, (unsigned long)addr, nr_bytes);
+ glue->output[reg] = H2BE_4(*(unsigned_word*)source);
+ DTRACE(glue, ("write - interrupt %d (0x%lx), level %d\n",
+ reg, (unsigned long) addr, glue->output[reg]));
+ device_interrupt_event(me, reg, glue->output[reg], processor, cia);
+ return nr_bytes;
+}
+
+static void
+hw_glue_interrupt_event(device *me,
+ int my_port,
+ device *source,
+ int source_port,
+ int level,
+ cpu *processor,
+ unsigned_word cia)
+{
+ hw_glue_device *glue = (hw_glue_device*)device_data(me);
+ int i;
+ if (my_port < glue->int_number
+ || my_port >= glue->int_number + glue->nr_inputs)
+ device_error(me, "interrupt %d outside of valid range", my_port);
+ glue->input[my_port - glue->int_number] = level;
+ switch (glue->type) {
+ case glue_io:
+ {
+ int port = my_port % glue->nr_outputs;
+ glue->output[port] = level;
+ DTRACE(glue, ("input - interrupt %d (0x%lx), level %d\n",
+ my_port,
+ (unsigned long)glue->address + port * sizeof(unsigned_word),
+ level));
+ break;
+ }
+ case glue_and:
+ glue->output[0] = glue->input[0];
+ for (i = 1; i < glue->nr_inputs; i++)
+ glue->output[0] &= glue->input[i];
+ DTRACE(glue, ("and - interrupt %d, level %d arrived - output %d\n",
+ my_port, level, glue->output[0]));
+ device_interrupt_event(me, 0, glue->output[0], processor, cia);
+ break;
+ default:
+ device_error(me, "operator not implemented");
+ break;
+ }
+}
+
+
+static const device_interrupt_port_descriptor hw_glue_interrupt_ports[] = {
+ { "int", 0, max_nr_interrupts },
+ { NULL }
+};
+
+
+static device_callbacks const hw_glue_callbacks = {
+ { hw_glue_init_address, NULL },
+ { NULL, }, /* address */
+ { hw_glue_io_read_buffer_callback,
+ hw_glue_io_write_buffer_callback, },
+ { NULL, }, /* DMA */
+ { hw_glue_interrupt_event, NULL, hw_glue_interrupt_ports }, /* interrupt */
+ { NULL, }, /* unit */
+ NULL, /* instance */
+};
+
+
+static void *
+hw_glue_create(const char *name,
+ const device_unit *unit_address,
+ const char *args)
+{
+ /* create the descriptor */
+ hw_glue_device *glue = ZALLOC(hw_glue_device);
+ return glue;
+}
+
+
+const device_descriptor hw_glue_device_descriptor[] = {
+ { "glue", hw_glue_create, &hw_glue_callbacks },
+ { "glue-and", hw_glue_create, &hw_glue_callbacks },
+ { "glue-nand", hw_glue_create, &hw_glue_callbacks },
+ { "glue-or", hw_glue_create, &hw_glue_callbacks },
+ { "glue-xor", hw_glue_create, &hw_glue_callbacks },
+ { "glue-nor", hw_glue_create, &hw_glue_callbacks },
+ { "glue-not", hw_glue_create, &hw_glue_callbacks },
+ { NULL },
+};
+
+#endif /* _HW_GLUE_C_ */
diff --git a/sim/ppc/hw_ide.c b/sim/ppc/hw_ide.c
new file mode 100644
index 0000000..00d54b3
--- /dev/null
+++ b/sim/ppc/hw_ide.c
@@ -0,0 +1,869 @@
+/* This file is part of the program psim.
+
+ Copyright (C) 1996, Andrew Cagney <cagney@highland.com.au>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+ */
+
+
+#ifndef _HW_IDE_C_
+#define _HW_IDE_C_
+
+#include "device_table.h"
+
+
+
+/* DEVICE
+
+
+ ide - Integrated Disk Electronics
+
+
+ DESCRIPTION
+
+
+ This device models the primary/secondary <<ide>> controller
+ described in the [CHRPIO] document.
+
+ The controller has separate independant interrupt outputs for each
+ <<ide>> bus.
+
+
+ PROPERTIES
+
+
+ reg = ... (required)
+
+ The <<reg>> property is described in the document [CHRPIO].
+
+
+ ready-delay = <integer> (optional)
+
+ If present, this specifies the time that the <<ide>> device takes
+ to complete an I/O operation.
+
+
+ disk@?/ide-byte-count = <integer> (optional)
+
+ disk@?/ide-sector-count = <integer> (optional)
+
+ disk@?/ide-head-count = <integer> (optional)
+
+ The <<ide>> device checks each child (disk device) node to see if
+ it has the above properties. If present, these values will be used
+ to compute the <<LBA>> address in <<CHS>> addressing mode.
+
+
+ EXAMPLES
+
+
+ Enable tracing:
+
+ | -t ide-device \
+
+
+ Attach the <<ide>> device to the <<pci>> bus at slot one. Specify
+ legacy I/O addresses:
+
+ | -o '/phb/ide@1/assigned-addresses \
+ | ni0,0,10,1f0 8 \
+ | ni0,0,14,3f8 8 \
+ | ni0,0,18,170 8 \
+ | ni0,0,1c,378 8 \
+ | ni0,0,20,200 8' \
+ | -o '/phb@0x80000000/ide@1/reg \
+ | 1 0 \
+ | i0,0,10,0 8 \
+ | i0,0,18,0 8 \
+ | i0,0,14,6 1 \
+ | i0,0,1c,6 1 \
+ | i0,0,20,0 8' \
+
+ Note: the fouth and fifth reg entries specify that the register is
+ at an offset into the address specified by the base register
+ (<<assigned-addresses>>); Apart from restrictions placed by the
+ <<pci>> specification, no restrictions are placed on the number of
+ base registers specified by the <<assigned-addresses>> property.
+
+ Attach a <<disk>> to the primary and a <<cdrom>> to the secondary
+ <<ide>> controller.
+
+ | -o '/phb@0x80000000/ide@1/disk@0/file "zero' \
+ | -o '/phb@0x80000000/ide@1/cdrom@2/file "/dev/cdrom"' \
+
+ Connect the two interrupt outputs (a and b) to a <<glue>> device to
+ allow testing of the interrupt port. In a real simulation they
+ would be wired to the interrupt controller.
+
+ | -o '/phb@0x80000000/glue@2/reg 2 0 ni0,0,0,0 8' \
+ | -o '/phb@0x80000000/ide@1 > a 0 /phb@0x80000000/glue@2' \
+ | -o '/phb@0x80000000/ide@1 > b 1 /phb@0x80000000/glue@2'
+
+
+ BUGS
+
+
+ While the DMA registers are present, DMA support has not yet been
+ implemented.
+
+ The number of supported commands is very limited.
+
+ The standards documents appear to be vague on how to specify the
+ <<unit-address>> of disk devices devices being attached to the
+ <<ide>> controller. I've chosen to use integers with devices zero
+ and one going to the primary controller while two and three are
+ connected to the secondary controller.
+
+
+ REFERENCES
+
+
+ [CHRPIO] PowerPC(tm) Microprocessor Common Hardware Reference
+ Platform: I/O Device Reference. http://chrp.apple.com/???.
+
+ [SCHMIDT] The SCSI Bus and IDE Interface - Protocols, Applications
+ and Programming. Friedhelm Schmidt (translated by Michael
+ Schultz). ISBN 0-201-42284-0. Addison-Wesley Publishing Company.
+
+
+ */
+
+
+
+typedef enum _io_direction {
+ is_read,
+ is_write,
+} io_direction;
+
+
+enum {
+ nr_ide_controllers = 2,
+ nr_ide_drives_per_controller = 2,
+ nr_fifo_entries = 8192,
+};
+
+enum {
+ /* command register block - read */
+ ide_data_reg,
+ ide_error_reg, /*ide_feature_reg*/
+ ide_sector_count_reg,
+ ide_sector_number_reg,
+ ide_cylinder_reg0,
+ ide_cylinder_reg1,
+ ide_drive_head_reg,
+ ide_status_reg, /*ide_command_reg*/
+ /* command register block - write */
+ ide_feature_reg, /*ide_error_reg*/
+ ide_command_reg, /*ide_status_reg*/
+ /* control register block - read */
+ ide_alternate_status_reg, /*ide_control_reg*/
+ ide_control_reg, /*ide_alternate_status_reg*/
+ /* dma register block */
+ ide_dma_command_reg,
+ ide_dma_unused_1_reg,
+ ide_dma_status_reg,
+ ide_dma_unused_3_reg,
+ ide_dma_prd_table_address_reg0,
+ ide_dma_prd_table_address_reg1,
+ ide_dma_prd_table_address_reg2,
+ ide_dma_prd_table_address_reg3,
+ nr_ide_registers,
+};
+
+
+typedef enum _ide_states {
+ idle_state,
+ busy_loaded_state,
+ busy_drained_state,
+ busy_dma_state,
+ busy_command_state,
+ loading_state,
+ draining_state,
+} ide_states;
+
+static const char *
+ide_state_name(ide_states state)
+{
+ switch (state) {
+ case idle_state: return "idle";
+ case busy_loaded_state: return "busy_loaded_state";
+ case busy_drained_state: return "busy_drained_state";
+ case busy_dma_state: return "busy_dma_state";
+ case busy_command_state: return "busy_command_state";
+ case loading_state: return "loading_state";
+ case draining_state: return "draining_state";
+ default: return "illegal-state";
+ }
+}
+
+typedef struct _ide_geometry {
+ int head;
+ int sector;
+ int byte;
+} ide_geometry;
+
+typedef struct _ide_drive {
+ int nr;
+ device *device;
+ ide_geometry geometry;
+ ide_geometry default_geometry;
+} ide_drive;
+
+typedef struct _ide_controller {
+ int nr;
+ ide_states state;
+ unsigned8 reg[nr_ide_registers];
+ unsigned8 fifo[nr_fifo_entries];
+ int fifo_pos;
+ int fifo_size;
+ ide_drive *current_drive;
+ int current_byte;
+ int current_transfer;
+ ide_drive drive[nr_ide_drives_per_controller];
+ device *me;
+ event_entry_tag event_tag;
+ int is_interrupting;
+ signed64 ready_delay;
+} ide_controller;
+
+
+
+static void
+set_interrupt(device *me,
+ ide_controller *controller)
+{
+ if ((controller->reg[ide_control_reg] & 0x2) == 0) {
+ DTRACE(ide, ("controller %d - interrupt set\n", controller->nr));
+ device_interrupt_event(me, controller->nr, 1, NULL, 0);
+ controller->is_interrupting = 1;
+ }
+}
+
+
+static void
+clear_interrupt(device *me,
+ ide_controller *controller)
+{
+ if (controller->is_interrupting) {
+ DTRACE(ide, ("controller %d - interrupt clear\n", controller->nr));
+ device_interrupt_event(me, controller->nr, 0, NULL, 0);
+ controller->is_interrupting = 0;
+ }
+}
+
+
+static void
+do_event(void *data)
+{
+ ide_controller *controller = data;
+ device *me = controller->me;
+ controller->event_tag = 0;
+ switch (controller->state) {
+ case busy_loaded_state:
+ case busy_drained_state:
+ if (controller->current_transfer > 0) {
+ controller->state = (controller->state == busy_loaded_state
+ ? loading_state : draining_state);
+ }
+ else {
+ controller->state = idle_state;
+ }
+ set_interrupt(me, controller);
+ break;
+ default:
+ device_error(me, "controller %d - unexpected event", controller->nr);
+ break;
+ }
+}
+
+
+static void
+schedule_ready_event(device *me,
+ ide_controller *controller)
+{
+ if (controller->event_tag != 0)
+ device_error(me, "controller %d - attempting to schedule multiple events",
+ controller->nr);
+ controller->event_tag =
+ device_event_queue_schedule(me, controller->ready_delay,
+ do_event, controller);
+}
+
+
+static void
+do_fifo_read(device *me,
+ ide_controller *controller,
+ void *dest,
+ int nr_bytes)
+{
+ if (controller->state != draining_state)
+ device_error(me, "controller %d - reading fifo when not ready (%s)",
+ controller->nr,
+ ide_state_name(controller->state));
+ if (controller->fifo_pos + nr_bytes > controller->fifo_size)
+ device_error(me, "controller %d - fifo underflow", controller->nr);
+ if (nr_bytes > 0) {
+ memcpy(dest, &controller->fifo[controller->fifo_pos], nr_bytes);
+ controller->fifo_pos += nr_bytes;
+ }
+ if (controller->fifo_pos == controller->fifo_size) {
+ controller->current_transfer -= 1;
+ if (controller->current_transfer > 0
+ && controller->current_drive != NULL) {
+ DTRACE(ide, ("controller %d:%d - reading %d byte block at 0x%x\n",
+ controller->nr,
+ controller->current_drive->nr,
+ controller->fifo_size,
+ controller->current_byte));
+ if (device_io_read_buffer(controller->current_drive->device,
+ controller->fifo,
+ 0, controller->current_byte,
+ controller->fifo_size,
+ NULL, 0)
+ != controller->fifo_size)
+ device_error(me, "controller %d - disk %s io read error",
+ controller->nr,
+ device_path(controller->current_drive->device));
+ }
+ controller->state = busy_drained_state;
+ controller->fifo_pos = 0;
+ controller->current_byte += controller->fifo_size;
+ schedule_ready_event(me, controller);
+ }
+}
+
+
+static void
+do_fifo_write(device *me,
+ ide_controller *controller,
+ const void *source,
+ int nr_bytes)
+{
+ if (controller->state != loading_state)
+ device_error(me, "controller %d - writing fifo when not ready (%s)",
+ controller->nr,
+ ide_state_name(controller->state));
+ if (controller->fifo_pos + nr_bytes > controller->fifo_size)
+ device_error(me, "controller %d - fifo overflow", controller->nr);
+ if (nr_bytes > 0) {
+ memcpy(&controller->fifo[controller->fifo_pos], source, nr_bytes);
+ controller->fifo_pos += nr_bytes;
+ }
+ if (controller->fifo_pos == controller->fifo_size) {
+ if (controller->current_transfer > 0
+ && controller->current_drive != NULL) {
+ DTRACE(ide, ("controller %d:%d - writing %d byte block at 0x%x\n",
+ controller->nr,
+ controller->current_drive->nr,
+ controller->fifo_size,
+ controller->current_byte));
+ if (device_io_write_buffer(controller->current_drive->device,
+ controller->fifo,
+ 0, controller->current_byte,
+ controller->fifo_size,
+ NULL, 0)
+ != controller->fifo_size)
+ device_error(me, "controller %d - disk %s io write error",
+ controller->nr,
+ device_path(controller->current_drive->device));
+ }
+ controller->current_transfer -= 1;
+ controller->fifo_pos = 0;
+ controller->current_byte += controller->fifo_size;
+ controller->state = busy_loaded_state;
+ schedule_ready_event(me, controller);
+ }
+}
+
+
+static void
+setup_fifo(device *me,
+ ide_controller *controller,
+ int is_simple,
+ int is_with_disk,
+ io_direction direction)
+{
+ /* find the disk */
+ if (is_with_disk) {
+ int drive_nr = (controller->reg[ide_drive_head_reg] & 0x10) != 0;
+ controller->current_drive = &controller->drive[drive_nr];
+ }
+ else {
+ controller->current_drive = NULL;
+ }
+
+ /* number of transfers */
+ if (is_simple)
+ controller->current_transfer = 1;
+ else {
+ int sector_count = controller->reg[ide_sector_count_reg];
+ if (sector_count == 0)
+ controller->current_transfer = 256;
+ else
+ controller->current_transfer = sector_count;
+ }
+
+ /* the transfer size */
+ if (controller->current_drive == NULL)
+ controller->fifo_size = 512;
+ else
+ controller->fifo_size = controller->current_drive->geometry.byte;
+
+ /* empty the fifo */
+ controller->fifo_pos = 0;
+
+ /* the starting address */
+ if (controller->current_drive == NULL)
+ controller->current_byte = 0;
+ else if (controller->reg[ide_drive_head_reg] & 0x40) {
+ /* LBA addressing mode */
+ controller->current_byte = controller->fifo_size
+ * (((controller->reg[ide_drive_head_reg] & 0xf) << 24)
+ | (controller->reg[ide_cylinder_reg1] << 16)
+ | (controller->reg[ide_cylinder_reg0] << 8)
+ | (controller->reg[ide_sector_number_reg]));
+ }
+ else if (controller->current_drive->geometry.head != 0
+ && controller->current_drive->geometry.sector != 0) {
+ /* CHS addressing mode */
+ int head_nr = controller->reg[ide_drive_head_reg] & 0xf;
+ int cylinder_nr = ((controller->reg[ide_cylinder_reg1] << 8)
+ | controller->reg[ide_cylinder_reg0]);
+ int sector_nr = controller->reg[ide_sector_number_reg];
+ controller->current_byte = controller->fifo_size
+ * ((cylinder_nr * controller->current_drive->geometry.head + head_nr)
+ * controller->current_drive->geometry.sector + sector_nr - 1);
+ }
+ else
+ device_error(me, "controller %d:%d - CHS addressing disabled",
+ controller->nr, controller->current_drive->nr);
+ DTRACE(ide, ("controller %ld:%ld - transfer (%s) %ld blocks of %ld bytes from 0x%lx\n",
+ (long)controller->nr,
+ controller->current_drive == NULL ? -1L : (long)controller->current_drive->nr,
+ direction == is_read ? "read" : "write",
+ (long)controller->current_transfer,
+ (long)controller->fifo_size,
+ (unsigned long)controller->current_byte));
+ switch (direction) {
+ case is_read:
+ /* force a primeing read */
+ controller->current_transfer += 1;
+ controller->state = draining_state;
+ controller->fifo_pos = controller->fifo_size;
+ do_fifo_read(me, controller, NULL, 0);
+ break;
+ case is_write:
+ controller->state = loading_state;
+ break;
+ }
+}
+
+
+static void
+do_command(device *me,
+ ide_controller *controller,
+ int command)
+{
+ if (controller->state != idle_state)
+ device_error(me, "controller %d - command when not idle", controller->nr);
+ switch (command) {
+ case 0x20: case 0x21: /* read-sectors */
+ setup_fifo(me, controller, 0/*is_simple*/, 1/*is_with_disk*/, is_read);
+ break;
+ case 0x30: case 0x31: /* write */
+ setup_fifo(me, controller, 0/*is_simple*/, 1/*is_with_disk*/, is_write);
+ break;
+ }
+}
+
+static unsigned8
+get_status(device *me,
+ ide_controller *controller)
+{
+ switch (controller->state) {
+ case loading_state:
+ case draining_state:
+ return 0x08; /* data req */
+ case busy_loaded_state:
+ case busy_drained_state:
+ return 0x80; /* busy */
+ case idle_state:
+ return 0x40; /* drive ready */
+ default:
+ device_error(me, "internal error");
+ return 0;
+ }
+}
+
+
+/* The address presented to the IDE controler is decoded and then
+ mapped onto a controller:reg pair */
+
+enum {
+ nr_address_blocks = 6,
+};
+
+typedef struct _address_block {
+ int space;
+ unsigned_word base_addr;
+ unsigned_word bound_addr;
+ int controller;
+ int base_reg;
+} address_block;
+
+typedef struct _address_decoder {
+ address_block block[nr_address_blocks];
+} address_decoder;
+
+static void
+decode_address(device *me,
+ address_decoder *decoder,
+ int space,
+ unsigned_word address,
+ int *controller,
+ int *reg,
+ io_direction direction)
+{
+ int i;
+ for (i = 0; i < nr_address_blocks; i++) {
+ if (space == decoder->block[i].space
+ && address >= decoder->block[i].base_addr
+ && address <= decoder->block[i].bound_addr) {
+ *controller = decoder->block[i].controller;
+ *reg = (address
+ - decoder->block[i].base_addr
+ + decoder->block[i].base_reg);
+ if (direction == is_write) {
+ switch (*reg) {
+ case ide_error_reg: *reg = ide_feature_reg; break;
+ case ide_status_reg: *reg = ide_command_reg; break;
+ case ide_alternate_status_reg: *reg = ide_control_reg; break;
+ default: break;
+ }
+ }
+ return;
+ }
+ }
+ device_error(me, "address %d:0x%lx invalid",
+ space, (unsigned long)address);
+}
+
+
+static void
+build_address_decoder(device *me,
+ address_decoder *decoder)
+{
+ int reg;
+ for (reg = 1; reg < 6; reg++) {
+ reg_property_spec unit;
+ int space;
+ unsigned_word address;
+ unsigned size;
+ /* find and decode the reg property */
+ if (!device_find_reg_array_property(me, "reg", reg, &unit))
+ device_error(me, "missing or invalid reg entry %d", reg);
+ device_address_to_attach_address(device_parent(me), &unit.address,
+ &space, &address, me);
+ device_size_to_attach_size(device_parent(me), &unit.size, &size, me);
+ /* insert it into the address decoder */
+ switch (reg) {
+ case 1:
+ case 2:
+ /* command register block */
+ if (size != 8)
+ device_error(me, "reg entry %d must have a size of 8", reg);
+ decoder->block[reg-1].space = space;
+ decoder->block[reg-1].base_addr = address;
+ decoder->block[reg-1].bound_addr = address + size - 1;
+ decoder->block[reg-1].controller = (reg + 1) % nr_ide_controllers;
+ decoder->block[reg-1].base_reg = ide_data_reg;
+ DTRACE(ide, ("controller %d command register block at %d:0x%lx..0x%lx\n",
+ decoder->block[reg-1].controller,
+ decoder->block[reg-1].space,
+ (unsigned long)decoder->block[reg-1].base_addr,
+ (unsigned long)decoder->block[reg-1].bound_addr));
+ break;
+ case 3:
+ case 4:
+ /* control register block */
+ if (size != 1)
+ device_error(me, "reg entry %d must have a size of 1", reg);
+ decoder->block[reg-1].space = space;
+ decoder->block[reg-1].base_addr = address;
+ decoder->block[reg-1].bound_addr = address + size - 1;
+ decoder->block[reg-1].controller = (reg + 1) % nr_ide_controllers;
+ decoder->block[reg-1].base_reg = ide_alternate_status_reg;
+ DTRACE(ide, ("controller %d control register block at %d:0x%lx..0x%lx\n",
+ decoder->block[reg-1].controller,
+ decoder->block[reg-1].space,
+ (unsigned long)decoder->block[reg-1].base_addr,
+ (unsigned long)decoder->block[reg-1].bound_addr));
+ break;
+ case 5:
+ /* dma register block */
+ if (size != 8)
+ device_error(me, "reg entry %d must have a size of 8", reg);
+ decoder->block[reg-1].space = space;
+ decoder->block[reg-1].base_addr = address;
+ decoder->block[reg-1].bound_addr = address + 4 - 1;
+ decoder->block[reg-1].base_reg = ide_dma_command_reg;
+ decoder->block[reg-1].controller = 0;
+ DTRACE(ide, ("controller %d dma register block at %d:0x%lx..0x%lx\n",
+ decoder->block[reg-1].controller,
+ decoder->block[reg-1].space,
+ (unsigned long)decoder->block[reg-1].base_addr,
+ (unsigned long)decoder->block[reg-1].bound_addr));
+ decoder->block[reg].space = space;
+ decoder->block[reg].base_addr = address + 4;
+ decoder->block[reg].bound_addr = address + 8 - 1;
+ decoder->block[reg].controller = 1;
+ decoder->block[reg].base_reg = ide_dma_command_reg;
+ DTRACE(ide, ("controller %d dma register block at %d:0x%lx..0x%lx\n",
+ decoder->block[reg].controller,
+ decoder->block[reg-1].space,
+ (unsigned long)decoder->block[reg].base_addr,
+ (unsigned long)decoder->block[reg].bound_addr));
+ break;
+ default:
+ device_error(me, "internal error - bad switch");
+ break;
+ }
+ }
+}
+
+
+
+typedef struct _hw_ide_device {
+ ide_controller controller[nr_ide_controllers];
+ address_decoder decoder;
+} hw_ide_device;
+
+
+static void
+hw_ide_init_address(device *me)
+{
+ hw_ide_device *ide = device_data(me);
+ int controller;
+ int drive;
+
+ /* zero some things */
+ for (controller = 0; controller < nr_ide_controllers; controller++) {
+ memset(&ide->controller[controller], 0, sizeof(ide_controller));
+ for (drive = 0; drive < nr_ide_drives_per_controller; drive++) {
+ ide->controller[controller].drive[drive].nr = drive;
+ }
+ ide->controller[controller].me = me;
+ if (device_find_property(me, "ready-delay") != NULL)
+ ide->controller[controller].ready_delay =
+ device_find_integer_property(me, "ready-delay");
+ }
+
+ /* attach this device to its parent */
+ generic_device_init_address(me);
+
+ /* determine our own address map */
+ build_address_decoder(me, &ide->decoder);
+
+}
+
+
+static void
+hw_ide_attach_address(device *me,
+ attach_type type,
+ int space,
+ unsigned_word addr,
+ unsigned nr_bytes,
+ access_type access,
+ device *client) /*callback/default*/
+{
+ hw_ide_device *ide = (hw_ide_device*)device_data(me);
+ int controller_nr = addr / nr_ide_drives_per_controller;
+ int drive_nr = addr % nr_ide_drives_per_controller;
+ ide_controller *controller;
+ ide_drive *drive;
+ if (controller_nr >= nr_ide_controllers)
+ device_error(me, "no controller for disk %s",
+ device_path(client));
+
+ controller = &ide->controller[controller_nr];
+ drive = &controller->drive[drive_nr];
+ drive->device = client;
+ if (device_find_property(client, "ide-byte-count") != NULL)
+ drive->geometry.byte = device_find_integer_property(client, "ide-byte-count");
+ else
+ drive->geometry.byte = 512;
+ if (device_find_property(client, "ide-sector-count") != NULL)
+ drive->geometry.sector = device_find_integer_property(client, "ide-sector-count");
+ if (device_find_property(client, "ide-head-count") != NULL)
+ drive->geometry.head = device_find_integer_property(client, "ide-head-count");
+ drive->default_geometry = drive->geometry;
+ DTRACE(ide, ("controller %d:%d %s byte-count %d, sector-count %d, head-count %d\n",
+ controller_nr,
+ drive->nr,
+ device_path(client),
+ drive->geometry.byte,
+ drive->geometry.sector,
+ drive->geometry.head));
+}
+
+
+static unsigned
+hw_ide_io_read_buffer(device *me,
+ void *dest,
+ int space,
+ unsigned_word addr,
+ unsigned nr_bytes,
+ cpu *processor,
+ unsigned_word cia)
+{
+ hw_ide_device *ide = (hw_ide_device *)device_data(me);
+ int control_nr;
+ int reg;
+ ide_controller *controller;
+
+ /* find the interface */
+ decode_address(me, &ide->decoder, space, addr, &control_nr, &reg, is_read);
+ controller = & ide->controller[control_nr];
+
+ /* process the transfer */
+ memset(dest, 0, nr_bytes);
+ switch (reg) {
+ case ide_data_reg:
+ do_fifo_read(me, controller, dest, nr_bytes);
+ break;
+ case ide_status_reg:
+ *(unsigned8*)dest = get_status(me, controller);
+ clear_interrupt(me, controller);
+ break;
+ case ide_alternate_status_reg:
+ *(unsigned8*)dest = get_status(me, controller);
+ break;
+ case ide_error_reg:
+ case ide_sector_count_reg:
+ case ide_sector_number_reg:
+ case ide_cylinder_reg0:
+ case ide_cylinder_reg1:
+ case ide_drive_head_reg:
+ case ide_control_reg:
+ case ide_dma_command_reg:
+ case ide_dma_status_reg:
+ case ide_dma_prd_table_address_reg0:
+ case ide_dma_prd_table_address_reg1:
+ case ide_dma_prd_table_address_reg2:
+ case ide_dma_prd_table_address_reg3:
+ *(unsigned8*)dest = controller->reg[reg];
+ break;
+ default:
+ device_error(me, "bus-error at address 0x%lx", addr);
+ break;
+ }
+ return nr_bytes;
+}
+
+
+static unsigned
+hw_ide_io_write_buffer(device *me,
+ const void *source,
+ int space,
+ unsigned_word addr,
+ unsigned nr_bytes,
+ cpu *processor,
+ unsigned_word cia)
+{
+ hw_ide_device *ide = (hw_ide_device *)device_data(me);
+ int control_nr;
+ int reg;
+ ide_controller *controller;
+
+ /* find the interface */
+ decode_address(me, &ide->decoder, space, addr, &control_nr, &reg, is_write);
+ controller = &ide->controller[control_nr];
+
+ /* process the access */
+ switch (reg) {
+ case ide_data_reg:
+ do_fifo_write(me, controller, source, nr_bytes);
+ break;
+ case ide_command_reg:
+ do_command(me, controller, *(unsigned8*)source);
+ break;
+ case ide_control_reg:
+ controller->reg[reg] = *(unsigned8*)source;
+ /* possibly cancel interrupts */
+ if ((controller->reg[reg] & 0x02) == 0x02)
+ clear_interrupt(me, controller);
+ break;
+ case ide_feature_reg:
+ case ide_sector_count_reg:
+ case ide_sector_number_reg:
+ case ide_cylinder_reg0:
+ case ide_cylinder_reg1:
+ case ide_drive_head_reg:
+ case ide_dma_command_reg:
+ case ide_dma_status_reg:
+ case ide_dma_prd_table_address_reg0:
+ case ide_dma_prd_table_address_reg1:
+ case ide_dma_prd_table_address_reg2:
+ case ide_dma_prd_table_address_reg3:
+ controller->reg[reg] = *(unsigned8*)source;
+ break;
+ default:
+ device_error(me, "bus-error at 0x%lx", addr);
+ break;
+ }
+ return nr_bytes;
+}
+
+
+static const device_interrupt_port_descriptor hw_ide_interrupt_ports[] = {
+ { "a", 0, 0 },
+ { "b", 1, 0 },
+ { "c", 2, 0 },
+ { "d", 3, 0 },
+ { NULL }
+};
+
+
+
+static device_callbacks const hw_ide_callbacks = {
+ { hw_ide_init_address, },
+ { hw_ide_attach_address, }, /* attach */
+ { hw_ide_io_read_buffer, hw_ide_io_write_buffer, },
+ { NULL, }, /* DMA */
+ { NULL, NULL, hw_ide_interrupt_ports }, /* interrupt */
+ { generic_device_unit_decode,
+ generic_device_unit_encode,
+ generic_device_address_to_attach_address,
+ generic_device_size_to_attach_size },
+};
+
+
+static void *
+hw_ide_create(const char *name,
+ const device_unit *unit_address,
+ const char *args)
+{
+ hw_ide_device *ide = ZALLOC(hw_ide_device);
+ return ide;
+}
+
+
+const device_descriptor hw_ide_device_descriptor[] = {
+ { "ide", hw_ide_create, &hw_ide_callbacks },
+ { NULL, },
+};
+
+#endif /* _HW_IDE_ */
diff --git a/sim/ppc/hw_opic.c b/sim/ppc/hw_opic.c
new file mode 100644
index 0000000..c314347
--- /dev/null
+++ b/sim/ppc/hw_opic.c
@@ -0,0 +1,1827 @@
+/* This file is part of the program psim.
+
+ Copyright (C) 1994-1996, Andrew Cagney <cagney@highland.com.au>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+ */
+
+
+#ifndef _HW_OPIC_C_
+#define _HW_OPIC_C_
+
+#include "device_table.h"
+
+#ifdef HAVE_STRING_H
+#include <string.h>
+#else
+#ifdef HAVE_STRINGS_H
+#include <strings.h>
+#endif
+#endif
+
+
+/* DEVICE
+
+
+ opic - Open Programmable Interrupt Controller (OpenPIC)
+
+
+ DESCRIPTION
+
+
+ This device implements the core of the OpenPIC interrupt controller
+ as described in the OpenPIC specification 1.2 and other related
+ documents.
+
+ The model includes:
+
+ o Up to 2048 external interrupt sources
+
+ o The four count down timers
+
+ o The four interprocessor multicast interrupts
+
+ o multiprocessor support
+
+ o Full tracing to assist help debugging
+
+ o Support for all variations of edge/level x high/low polarity.
+
+
+
+ PROPERTIES
+
+
+ reg = <address> <size> ... (required)
+
+ Determine where the device lives in the parents address space. The
+ first <<address>> <<size>> pair specifies the address of the
+ interrupt destination unit (which might contain an interrupt source
+ unit) while successive reg entries specify additional interrupt
+ source units.
+
+ Note that for an <<opic>> device attached to a <<pci>> bus, the
+ first <<reg>> entry may need to be ignored it will be the address
+ of the devices configuration registers.
+
+
+ interrupt-ranges = <int-number> <range> ... (required)
+
+ A list of pairs. Each pair corresponds to a block of interrupt
+ source units (the address of which being specified by the
+ corresponding reg tupple). <<int-number>> is the number of the
+ first interrupt in the block while <<range>> is the number of
+ interrupts in the block.
+
+
+ timer-frequency = <integer> (optional)
+
+ If present, specifies the default value of the timer frequency
+ reporting register. By default a value of 1 HZ is used. The value
+ is arbitrary, the timers are always updated once per machine cycle.
+
+
+ vendor-identification = <integer> (optional)
+
+ If present, specifies the value to be returned when the vendor
+ identification register is read.
+
+
+ EXAMPLES
+
+
+ See the test suite directory:
+
+ | psim-test/hw-opic
+
+
+ BUGS
+
+ For an OPIC controller attached to a PCI bus, it is not clear what
+ the value of the <<reg>> and <<interrupt-ranges>> properties should
+ be. In particular, the PCI firmware bindings require the first
+ value of the <<reg>> property to specify the devices configuration
+ address while the OpenPIC bindings require that same entry to
+ specify the address of the Interrupt Delivery Unit. This
+ implementation checks for and, if present, ignores any
+ configuration address (and its corresponding <<interrupt-ranges>>
+ entry).
+
+ The OpenPIC specification requires the controller to be fair when
+ distributing interrupts between processors. At present the
+ algorithm used isn't fair. It is biased towards processor zero.
+
+ The OpenPIC specification includes a 8259 pass through mode. This
+ is not supported.
+
+
+ REFERENCES
+
+
+ PowerPC Multiprocessor Interrupt Controller (MPIC), January 19,
+ 1996. Available from IBM.
+
+
+ The Open Programmable Interrupt Controller (PIC) Register Interface
+ Specification Revision 1.2. Issue Date: Opctober 1995. Available
+ somewhere on AMD's web page (http://www.amd.com/)
+
+
+ PowerPC Microprocessor Common Hardware Reference Platform (CHRP)
+ System bindings to: IEEE Std 1275-1994 Standard for Boot
+ (Initialization, Configuration) Firmware. Revision 1.2b (INTERIM
+ DRAFT). April 22, 1996. Available on the Open Firmware web site
+ http://playground.sun.com/p1275/.
+
+
+ */
+
+
+/* forward types */
+
+typedef struct _hw_opic_device hw_opic_device;
+
+
+/* bounds */
+
+enum {
+ max_nr_interrupt_sources = 2048,
+ max_nr_interrupt_destinations = 32,
+ max_nr_task_priorities = 16,
+};
+
+
+enum {
+ opic_alignment = 16,
+};
+
+
+/* global configuration register */
+
+enum {
+ gcr0_8259_bit = 0x20000000,
+ gcr0_reset_bit = 0x80000000,
+};
+
+
+/* offsets and sizes */
+
+enum {
+ idu_isu_base = 0x10000,
+ sizeof_isu_register_block = 32,
+ idu_per_processor_register_base = 0x20000,
+ sizeof_idu_per_processor_register_block = 0x1000,
+ idu_timer_base = 0x01100,
+ sizeof_timer_register_block = 0x00040,
+};
+
+
+/* Interrupt sources */
+
+enum {
+ isu_mask_bit = 0x80000000,
+ isu_active_bit = 0x40000000,
+ isu_multicast_bit = 0x20000000,
+ isu_positive_polarity_bit = 0x00800000,
+ isu_level_triggered_bit = 0x00400000,
+ isu_priority_shift = 16,
+ isu_vector_bits = 0x000000ff,
+};
+
+
+typedef struct _opic_interrupt_source {
+ unsigned is_masked; /* left in place */
+ unsigned is_multicast; /* left in place */
+ unsigned is_positive_polarity; /* left in place */
+ unsigned is_level_triggered; /* left in place */
+ unsigned priority;
+ unsigned vector;
+ /* misc */
+ int nr;
+ unsigned destination;
+ unsigned pending;
+ unsigned in_service;
+} opic_interrupt_source;
+
+
+/* interrupt destinations (normally processors) */
+
+typedef struct _opic_interrupt_destination {
+ int nr;
+ unsigned base_priority;
+ opic_interrupt_source *current_pending;
+ opic_interrupt_source *current_in_service;
+ unsigned bit;
+ int init_port;
+ int intr_port;
+} opic_interrupt_destination;
+
+
+/* address map descriptors */
+
+typedef struct _opic_isu_block { /* interrupt source unit block */
+ int space;
+ unsigned_word address;
+ unsigned size;
+ unsigned_cell int_number;
+ unsigned_cell range;
+ int reg;
+} opic_isu_block;
+
+
+typedef struct _opic_idu { /* interrupt delivery unit */
+ int reg;
+ int space;
+ unsigned_word address;
+ unsigned size;
+} opic_idu;
+
+typedef enum {
+ /* bad */
+ invalid_opic_register,
+ /* interrupt source */
+ interrupt_source_N_destination_register,
+ interrupt_source_N_vector_priority_register,
+ /* timers */
+ timer_N_destination_register,
+ timer_N_vector_priority_register,
+ timer_N_base_count_register,
+ timer_N_current_count_register,
+ timer_frequency_reporting_register,
+ /* inter-processor interrupts */
+ ipi_N_vector_priority_register,
+ ipi_N_dispatch_register,
+ /* global configuration */
+ spurious_vector_register,
+ processor_init_register,
+ vendor_identification_register,
+ global_configuration_register_N,
+ feature_reporting_register_N,
+ /* per processor */
+ end_of_interrupt_register_N,
+ interrupt_acknowledge_register_N,
+ current_task_priority_register_N,
+} opic_register;
+
+static const char *
+opic_register_name(opic_register type)
+{
+ switch (type) {
+ case invalid_opic_register: return "invalid_opic_register";
+ case interrupt_source_N_destination_register: return "interrupt_source_N_destination_register";
+ case interrupt_source_N_vector_priority_register: return "interrupt_source_N_vector_priority_register";
+ case timer_N_destination_register: return "timer_N_destination_register";
+ case timer_N_vector_priority_register: return "timer_N_vector_priority_register";
+ case timer_N_base_count_register: return "timer_N_base_count_register";
+ case timer_N_current_count_register: return "timer_N_current_count_register";
+ case timer_frequency_reporting_register: return "timer_frequency_reporting_register";
+ case ipi_N_vector_priority_register: return "ipi_N_vector_priority_register";
+ case ipi_N_dispatch_register: return "ipi_N_dispatch_register";
+ case spurious_vector_register: return "spurious_vector_register";
+ case processor_init_register: return "processor_init_register";
+ case vendor_identification_register: return "vendor_identification_register";
+ case global_configuration_register_N: return "global_configuration_register_N";
+ case feature_reporting_register_N: return "feature_reporting_register_N";
+ case end_of_interrupt_register_N: return "end_of_interrupt_register_N";
+ case interrupt_acknowledge_register_N: return "interrupt_acknowledge_register_N";
+ case current_task_priority_register_N: return "current_task_priority_register_N";
+ }
+ return NULL;
+}
+
+
+
+/* timers */
+
+typedef struct _opic_timer {
+ int nr;
+ device *me; /* find my way home */
+ hw_opic_device *opic; /* ditto */
+ unsigned base_count;
+ int inhibited;
+ signed64 count; /* *ONLY* if inhibited */
+ event_entry_tag timeout_event;
+ opic_interrupt_source *interrupt_source;
+} opic_timer;
+
+
+/* the OPIC */
+
+struct _hw_opic_device {
+
+ /* vendor id */
+ unsigned vendor_identification;
+
+ /* interrupt destinations - processors */
+ int nr_interrupt_destinations;
+ opic_interrupt_destination *interrupt_destination;
+ unsigned sizeof_interrupt_destination;
+
+ /* bogus interrupts */
+ int spurious_vector;
+
+ /* interrupt sources - external interrupt source units + extra internal ones */
+ int nr_interrupt_sources;
+ opic_interrupt_source *interrupt_source;
+ unsigned sizeof_interrupt_source;
+
+ /* external interrupts */
+ int nr_external_interrupts;
+ opic_interrupt_source *external_interrupt_source;
+
+ /* inter-processor-interrupts */
+ int nr_interprocessor_interrupts;
+ opic_interrupt_source *interprocessor_interrupt_source;
+
+ /* timers */
+ int nr_timer_interrupts;
+ opic_timer *timer;
+ unsigned sizeof_timer;
+ opic_interrupt_source *timer_interrupt_source;
+ unsigned timer_frequency;
+
+ /* init register */
+ unsigned32 init;
+
+ /* address maps */
+ opic_idu idu;
+ int nr_isu_blocks;
+ opic_isu_block *isu_block;
+};
+
+
+static void
+hw_opic_init_data(device *me)
+{
+ hw_opic_device *opic = (hw_opic_device*)device_data(me);
+ int isb;
+ int idu_reg;
+ int nr_isu_blocks;
+ int i;
+
+ /* determine the first valid reg property entry (there could be
+ leading reg entries with invalid (zero) size fields) and the
+ number of isu entries found in the reg property. */
+ idu_reg = 0;
+ nr_isu_blocks = 0;
+ while (1) {
+ reg_property_spec unit;
+ int attach_space;
+ unsigned_word attach_address;
+ unsigned attach_size;
+ if (!device_find_reg_array_property(me, "reg", idu_reg + nr_isu_blocks,
+ &unit))
+ break;
+ if (nr_isu_blocks > 0
+ || (device_address_to_attach_address(device_parent(me), &unit.address,
+ &attach_space, &attach_address,
+ me)
+ && device_size_to_attach_size(device_parent(me), &unit.size,
+ &attach_size,
+ me))) {
+ /* we count any thing once we've found one valid address/size pair */
+ nr_isu_blocks += 1;
+ }
+ else {
+ idu_reg += 1;
+ }
+ }
+
+ /* determine the number and location of the multiple interrupt
+ source units and the single interrupt delivery unit */
+ if (opic->isu_block == NULL) {
+ int reg_nr;
+ opic->nr_isu_blocks = nr_isu_blocks;
+ opic->isu_block = zalloc(sizeof(opic_isu_block) * opic->nr_isu_blocks);
+ isb = 0;
+ reg_nr = idu_reg;
+ while (isb < opic->nr_isu_blocks) {
+ reg_property_spec reg;
+ if (!device_find_reg_array_property(me, "reg", reg_nr, &reg))
+ device_error(me, "reg property missing entry number %d", reg_nr);
+ opic->isu_block[isb].reg = reg_nr;
+ if (!device_address_to_attach_address(device_parent(me), &reg.address,
+ &opic->isu_block[isb].space,
+ &opic->isu_block[isb].address,
+ me)
+ || !device_size_to_attach_size(device_parent(me), &reg.size,
+ &opic->isu_block[isb].size,
+ me)) {
+ device_error(me, "reg property entry %d invalid", reg_nr);
+ }
+ if (!device_find_integer_array_property(me, "interrupt-ranges",
+ reg_nr * 2,
+ &opic->isu_block[isb].int_number)
+ || !device_find_integer_array_property(me, "interrupt-ranges",
+ reg_nr * 2 + 1,
+ &opic->isu_block[isb].range))
+ device_error(me, "missing or invalid interrupt-ranges property entry %d", reg_nr);
+ /* first reg entry specifies the address of both the IDU and the
+ first set of ISU registers, adjust things accordingly */
+ if (reg_nr == idu_reg) {
+ opic->idu.reg = opic->isu_block[isb].reg;
+ opic->idu.space = opic->isu_block[isb].space;
+ opic->idu.address = opic->isu_block[isb].address;
+ opic->idu.size = opic->isu_block[isb].size;
+ opic->isu_block[isb].address += idu_isu_base;
+ opic->isu_block[isb].size = opic->isu_block[isb].range * (16 + 16);
+ }
+ /* was this a valid reg entry? */
+ if (opic->isu_block[isb].range == 0) {
+ opic->nr_isu_blocks -= 1;
+ }
+ else {
+ opic->nr_external_interrupts += opic->isu_block[isb].range;
+ isb++;
+ }
+ reg_nr++;
+ }
+ }
+ DTRACE(opic, ("interrupt source unit block - effective number of blocks %d\n",
+ (int)opic->nr_isu_blocks));
+
+
+ /* the number of other interrupts */
+ opic->nr_interprocessor_interrupts = 4;
+ opic->nr_timer_interrupts = 4;
+
+
+ /* create space for the interrupt source registers */
+ if (opic->interrupt_source != NULL) {
+ memset(opic->interrupt_source, 0, opic->sizeof_interrupt_source);
+ }
+ else {
+ opic->nr_interrupt_sources = (opic->nr_external_interrupts
+ + opic->nr_interprocessor_interrupts
+ + opic->nr_timer_interrupts);
+ if (opic->nr_interrupt_sources > max_nr_interrupt_sources)
+ device_error(me, "number of interrupt sources exceeded");
+ opic->sizeof_interrupt_source = (sizeof(opic_interrupt_source)
+ * opic->nr_interrupt_sources);
+ opic->interrupt_source = zalloc(opic->sizeof_interrupt_source);
+ opic->external_interrupt_source = opic->interrupt_source;
+ opic->interprocessor_interrupt_source = (opic->external_interrupt_source
+ + opic->nr_external_interrupts);
+ opic->timer_interrupt_source = (opic->interprocessor_interrupt_source
+ + opic->nr_interprocessor_interrupts);
+ }
+ for (i = 0; i < opic->nr_interrupt_sources; i++) {
+ opic_interrupt_source *source = &opic->interrupt_source[i];
+ source->nr = i;
+ source->is_masked = isu_mask_bit;
+ }
+ DTRACE(opic, ("interrupt sources - external %d, timer %d, ipi %d, total %d\n",
+ opic->nr_external_interrupts,
+ opic->nr_timer_interrupts,
+ opic->nr_interprocessor_interrupts,
+ opic->nr_interrupt_sources));
+
+
+ /* timers or interprocessor interrupts */
+ if (opic->timer != NULL)
+ memset(opic->timer, 0, opic->sizeof_timer);
+ else {
+ opic->nr_timer_interrupts = 4;
+ opic->sizeof_timer = sizeof(opic_timer) * opic->nr_timer_interrupts;
+ opic->timer = zalloc(opic->sizeof_timer);
+ }
+ for (i = 0; i < opic->nr_timer_interrupts; i++) {
+ opic_timer *timer = &opic->timer[i];
+ timer->nr = i;
+ timer->me = me;
+ timer->opic = opic;
+ timer->inhibited = 1;
+ timer->interrupt_source = &opic->timer_interrupt_source[i];
+ }
+ if (device_find_property(me, "timer-frequency"))
+ opic->timer_frequency = device_find_integer_property(me, "timer-frequency");
+ else
+ opic->timer_frequency = 1;
+
+
+ /* create space for the interrupt destination registers */
+ if (opic->interrupt_destination != NULL) {
+ memset(opic->interrupt_destination, 0, opic->sizeof_interrupt_destination);
+ }
+ else {
+ opic->nr_interrupt_destinations = tree_find_integer_property(me, "/openprom/options/smp");
+ opic->sizeof_interrupt_destination = (sizeof(opic_interrupt_destination)
+ * opic->nr_interrupt_destinations);
+ opic->interrupt_destination = zalloc(opic->sizeof_interrupt_destination);
+ if (opic->nr_interrupt_destinations > max_nr_interrupt_destinations)
+ device_error(me, "number of interrupt destinations exceeded");
+ }
+ for (i = 0; i < opic->nr_interrupt_destinations; i++) {
+ opic_interrupt_destination *dest = &opic->interrupt_destination[i];
+ dest->bit = (1 << i);
+ dest->nr = i;
+ dest->init_port = (device_interrupt_decode(me, "init0", output_port)
+ + i);
+ dest->intr_port = (device_interrupt_decode(me, "intr0", output_port)
+ + i);
+ dest->base_priority = max_nr_task_priorities - 1;
+ }
+ DTRACE(opic, ("interrupt destinations - total %d\n",
+ (int)opic->nr_interrupt_destinations));
+
+
+ /* verify and print out the ISU's */
+ for (isb = 0; isb < opic->nr_isu_blocks; isb++) {
+ unsigned correct_size;
+ if ((opic->isu_block[isb].address % opic_alignment) != 0)
+ device_error(me, "interrupt source unit %d address not aligned to %d byte boundary",
+ isb, opic_alignment);
+ correct_size = opic->isu_block[isb].range * sizeof_isu_register_block;
+ if (opic->isu_block[isb].size != correct_size)
+ device_error(me, "interrupt source unit %d (reg %d) has an incorrect size, should be 0x%x",
+ isb, opic->isu_block[isb].reg, correct_size);
+ DTRACE(opic, ("interrupt source unit block %ld - address %d:0x%lx, size 0x%lx, int-number %ld, range %ld\n",
+ (long)isb,
+ (int)opic->isu_block[isb].space,
+ (unsigned long)opic->isu_block[isb].address,
+ (unsigned long)opic->isu_block[isb].size,
+ (long)opic->isu_block[isb].int_number,
+ (long)opic->isu_block[isb].range));
+ }
+
+
+ /* verify and print out the IDU */
+ {
+ unsigned correct_size;
+ unsigned alternate_size;
+ if ((opic->idu.address % opic_alignment) != 0)
+ device_error(me, "interrupt delivery unit not aligned to %d byte boundary",
+ opic_alignment);
+ correct_size = (idu_per_processor_register_base
+ + (sizeof_idu_per_processor_register_block
+ * opic->nr_interrupt_destinations));
+ alternate_size = (idu_per_processor_register_base
+ + (sizeof_idu_per_processor_register_block
+ * max_nr_interrupt_destinations));
+ if (opic->idu.size != correct_size
+ && opic->idu.size != alternate_size)
+ device_error(me, "interrupt delivery unit has incorrect size, should be 0x%x or 0x%x",
+ correct_size, alternate_size);
+ DTRACE(opic, ("interrupt delivery unit - address %d:0x%lx, size 0x%lx\n",
+ (int)opic->idu.space,
+ (unsigned long)opic->idu.address,
+ (unsigned long)opic->idu.size));
+ }
+
+ /* initialize the init interrupts */
+ opic->init = 0;
+
+
+ /* vendor ident */
+ if (device_find_property(me, "vendor-identification") != NULL)
+ opic->vendor_identification = device_find_integer_property(me, "vendor-identification");
+ else
+ opic->vendor_identification = 0;
+
+ /* misc registers */
+ opic->spurious_vector = 0xff;
+
+}
+
+
+/* interrupt related actions */
+
+static void
+assert_interrupt(device *me,
+ hw_opic_device *opic,
+ opic_interrupt_destination *dest)
+{
+ ASSERT(dest >= opic->interrupt_destination);
+ ASSERT(dest < opic->interrupt_destination + opic->nr_interrupt_destinations);
+ DTRACE(opic, ("assert interrupt - intr port %d\n", dest->intr_port));
+ device_interrupt_event(me, dest->intr_port, 1, NULL, 0);
+}
+
+
+static void
+negate_interrupt(device *me,
+ hw_opic_device *opic,
+ opic_interrupt_destination *dest)
+{
+ ASSERT(dest >= opic->interrupt_destination);
+ ASSERT(dest < opic->interrupt_destination + opic->nr_interrupt_destinations);
+ DTRACE(opic, ("negate interrupt - intr port %d\n", dest->intr_port));
+ device_interrupt_event(me, dest->intr_port, 0, NULL, 0);
+}
+
+
+static int
+can_deliver(device *me,
+ opic_interrupt_source *source,
+ opic_interrupt_destination *dest)
+{
+ return (source != NULL && dest != NULL
+ && source->priority > dest->base_priority
+ && (dest->current_in_service == NULL
+ || source->priority > dest->current_in_service->priority));
+}
+
+
+static unsigned
+deliver_pending(device *me,
+ hw_opic_device *opic,
+ opic_interrupt_destination *dest)
+{
+ ASSERT(can_deliver(me, dest->current_pending, dest));
+ dest->current_in_service = dest->current_pending;
+ dest->current_in_service->in_service |= dest->bit;
+ if (!dest->current_pending->is_level_triggered) {
+ if (dest->current_pending->is_multicast)
+ dest->current_pending->pending &= ~dest->bit;
+ else
+ dest->current_pending->pending = 0;
+ }
+ dest->current_pending = NULL;
+ negate_interrupt(me, opic, dest);
+ return dest->current_in_service->vector;
+}
+
+
+typedef enum {
+ pending_interrupt,
+ in_service_interrupt,
+} interrupt_class;
+
+static opic_interrupt_source *
+find_interrupt_for_dest(device *me,
+ hw_opic_device *opic,
+ opic_interrupt_destination *dest,
+ interrupt_class class)
+{
+ int i;
+ opic_interrupt_source *pending = NULL;
+ for (i = 0; i < opic->nr_interrupt_sources; i++) {
+ opic_interrupt_source *src = &opic->interrupt_source[i];
+ /* is this a potential hit? */
+ switch (class) {
+ case in_service_interrupt:
+ if ((src->in_service & dest->bit) == 0)
+ continue;
+ break;
+ case pending_interrupt:
+ if ((src->pending & dest->bit) == 0)
+ continue;
+ break;
+ }
+ /* see if it is the highest priority */
+ if (pending == NULL)
+ pending = src;
+ else if (src->priority > pending->priority)
+ pending = src;
+ }
+ return pending;
+}
+
+
+static opic_interrupt_destination *
+find_lowest_dest(device *me,
+ hw_opic_device *opic,
+ opic_interrupt_source *src)
+{
+ int i;
+ opic_interrupt_destination *lowest = NULL;
+ for (i = 0; i < opic->nr_interrupt_destinations; i++) {
+ opic_interrupt_destination *dest = &opic->interrupt_destination[i];
+ if (src->destination & dest->bit) {
+ if (dest->base_priority < src->priority) {
+ if (lowest == NULL)
+ lowest = dest;
+ else if (lowest->base_priority > dest->base_priority)
+ lowest = dest;
+ else if (lowest->current_in_service != NULL
+ && dest->current_in_service == NULL)
+ lowest = dest; /* not doing anything */
+ else if (lowest->current_in_service != NULL
+ && dest->current_in_service != NULL
+ && (lowest->current_in_service->priority
+ > dest->current_in_service->priority))
+ lowest = dest; /* less urgent */
+ /* FIXME - need to be more fair */
+ }
+ }
+ }
+ return lowest;
+}
+
+
+static void
+handle_interrupt(device *me,
+ hw_opic_device *opic,
+ opic_interrupt_source *src,
+ int asserted)
+{
+ if (src->is_masked) {
+ DTRACE(opic, ("interrupt %d - ignore masked\n", src->nr));
+ }
+ else if (src->is_multicast) {
+ /* always try to deliver multicast interrupts - just easier */
+ int i;
+ ASSERT(!src->is_level_triggered);
+ ASSERT(src->is_positive_polarity);
+ ASSERT(asserted);
+ for (i = 0; i < opic->nr_interrupt_destinations; i++) {
+ opic_interrupt_destination *dest = &opic->interrupt_destination[i];
+ if (src->destination & dest->bit) {
+ if (src->pending & dest->bit) {
+ DTRACE(opic, ("interrupt %d - multicast still pending to %d\n",
+ src->nr, dest->nr));
+ }
+ else if (can_deliver(me, src, dest)) {
+ dest->current_pending = src;
+ src->pending |= dest->bit;
+ assert_interrupt(me, opic, dest);
+ DTRACE(opic, ("interrupt %d - multicast to %d\n",
+ src->nr, dest->nr));
+ }
+ else {
+ src->pending |= dest->bit;
+ DTRACE(opic, ("interrupt %d - multicast pending to %d\n",
+ src->nr, dest->nr));
+ }
+ }
+ }
+ }
+ else if (src->is_level_triggered
+ && src->is_positive_polarity
+ && !asserted) {
+ if (src->pending)
+ DTRACE(opic, ("interrupt %d - ignore withdrawn (active high)\n",
+ src->nr));
+ else
+ DTRACE(opic, ("interrupt %d - ignore low level (active high)\n",
+ src->nr));
+ ASSERT(!src->is_multicast);
+ src->pending = 0;
+ }
+ else if (src->is_level_triggered
+ && !src->is_positive_polarity
+ && asserted) {
+ if (src->pending)
+ DTRACE(opic, ("interrupt %d - ignore withdrawn (active low)\n",
+ src->nr));
+ else
+ DTRACE(opic, ("interrupt %d - ignore high level (active low)\n",
+ src->nr));
+
+ ASSERT(!src->is_multicast);
+ src->pending = 0;
+ }
+ else if (!src->is_level_triggered
+ && src->is_positive_polarity
+ && !asserted) {
+ DTRACE(opic, ("interrupt %d - ignore falling edge (positive edge trigered)\n",
+ src->nr));
+ }
+ else if (!src->is_level_triggered
+ && !src->is_positive_polarity
+ && asserted) {
+ DTRACE(opic, ("interrupt %d - ignore rising edge (negative edge trigered)\n",
+ src->nr));
+ }
+ else if (src->in_service != 0) {
+ /* leave the interrupt where it is */
+ ASSERT(!src->is_multicast);
+ ASSERT(src->pending == 0 || src->pending == src->in_service);
+ src->pending = src->in_service;
+ DTRACE(opic, ("interrupt %ld - ignore already in service to 0x%lx\n",
+ (long)src->nr, (long)src->in_service));
+ }
+ else if (src->pending != 0) {
+ DTRACE(opic, ("interrupt %ld - ignore still pending to 0x%lx\n",
+ (long)src->nr, (long)src->pending));
+ }
+ else {
+ /* delivery is needed */
+ opic_interrupt_destination *dest = find_lowest_dest(me, opic, src);
+ if (can_deliver(me, src, dest)) {
+ dest->current_pending = src;
+ src->pending = dest->bit;
+ DTRACE(opic, ("interrupt %d - delivered to %d\n", src->nr, dest->nr));
+ assert_interrupt(me, opic, dest);
+ }
+ else {
+ src->pending = src->destination; /* any can take this */
+ DTRACE(opic, ("interrupt %ld - pending to 0x%lx\n",
+ (long)src->nr, (long)src->pending));
+ }
+ }
+}
+
+static unsigned
+do_interrupt_acknowledge_register_N_read(device *me,
+ hw_opic_device *opic,
+ int dest_nr)
+{
+ opic_interrupt_destination *dest = &opic->interrupt_destination[dest_nr];
+ unsigned vector;
+
+ ASSERT(dest_nr >= 0 && dest_nr < opic->nr_interrupt_destinations);
+ ASSERT(dest_nr == dest->nr);
+
+ /* try the current pending */
+ if (can_deliver(me, dest->current_pending, dest)) {
+ ASSERT(dest->current_pending->pending & dest->bit);
+ vector = deliver_pending(me, opic, dest);
+ DTRACE(opic, ("interrupt ack %d - entering %d (pending) - vector %d (%d), priority %d\n",
+ dest->nr,
+ dest->current_in_service->nr,
+ dest->current_in_service->vector, vector,
+ dest->current_in_service->priority));
+ }
+ else {
+ /* try for something else */
+ dest->current_pending = find_interrupt_for_dest(me, opic, dest, pending_interrupt);
+ if (can_deliver(me, dest->current_pending, dest)) {
+ vector = deliver_pending(me, opic, dest);
+ DTRACE(opic, ("interrupt ack %d - entering %d (not pending) - vector %d (%d), priority %d\n",
+ dest->nr,
+ dest->current_in_service->nr,
+ dest->current_in_service->vector, vector,
+ dest->current_in_service->priority));
+ }
+ else {
+ dest->current_pending = NULL;
+ vector = opic->spurious_vector;
+ DTRACE(opic, ("interrupt ack %d - spurious interrupt %d\n",
+ dest->nr, vector));
+ }
+ }
+ return vector;
+}
+
+
+static void
+do_end_of_interrupt_register_N_write(device *me,
+ hw_opic_device *opic,
+ int dest_nr,
+ unsigned reg)
+{
+ opic_interrupt_destination *dest = &opic->interrupt_destination[dest_nr];
+
+ ASSERT(dest_nr >= 0 && dest_nr < opic->nr_interrupt_destinations);
+ ASSERT(dest_nr == dest->nr);
+
+ /* check the value written is zero */
+ if (reg != 0) {
+ DTRACE(opic, ("eoi %d - ignoring nonzero value\n", dest->nr));
+ }
+
+ /* user doing wierd things? */
+ if (dest->current_in_service == NULL) {
+ DTRACE(opic, ("eoi %d - strange, no current interrupt\n", dest->nr));
+ return;
+ }
+
+ /* an internal stuff up? */
+ if (!(dest->current_in_service->in_service & dest->bit)) {
+ device_error(me, "eoi %d - current interrupt not in service", dest->nr);
+ }
+
+ /* find what was probably the previous in service interrupt */
+ dest->current_in_service->in_service &= ~dest->bit;
+ DTRACE(opic, ("eoi %d - ending %d - priority %d, vector %d\n",
+ dest->nr,
+ dest->current_in_service->nr,
+ dest->current_in_service->priority,
+ dest->current_in_service->vector));
+ dest->current_in_service = find_interrupt_for_dest(me, opic, dest, in_service_interrupt);
+ if (dest->current_in_service != NULL)
+ DTRACE(opic, ("eoi %d - resuming %d - priority %d, vector %d\n",
+ dest->nr,
+ dest->current_in_service->nr,
+ dest->current_in_service->priority,
+ dest->current_in_service->vector));
+ else
+ DTRACE(opic, ("eoi %d - resuming none\n", dest->nr));
+
+ /* check to see if that shouldn't be interrupted */
+ dest->current_pending = find_interrupt_for_dest(me, opic, dest, pending_interrupt);
+ if (can_deliver(me, dest->current_pending, dest)) {
+ ASSERT(dest->current_pending->pending & dest->bit);
+ assert_interrupt(me, opic, dest);
+ }
+ else {
+ dest->current_pending = NULL;
+ }
+}
+
+
+static void
+decode_opic_address(device *me,
+ hw_opic_device *opic,
+ int space,
+ unsigned_word address,
+ unsigned nr_bytes,
+ opic_register *type,
+ int *index)
+{
+ int isb = 0;
+
+ /* is the size valid? */
+ if (nr_bytes != 4) {
+ *type = invalid_opic_register;
+ *index = -1;
+ return;
+ }
+
+ /* try for a per-processor register within the interrupt delivery
+ unit */
+ if (space == opic->idu.space
+ && address >= (opic->idu.address + idu_per_processor_register_base)
+ && address < (opic->idu.address + idu_per_processor_register_base
+ + (sizeof_idu_per_processor_register_block
+ * opic->nr_interrupt_destinations))) {
+ unsigned_word block_offset = (address
+ - opic->idu.address
+ - idu_per_processor_register_base);
+ unsigned_word offset = block_offset % sizeof_idu_per_processor_register_block;
+ *index = block_offset / sizeof_idu_per_processor_register_block;
+ switch (offset) {
+ case 0x040:
+ *type = ipi_N_dispatch_register;
+ *index = 0;
+ break;
+ case 0x050:
+ *type = ipi_N_dispatch_register;
+ *index = 1;
+ break;
+ case 0x060:
+ *type = ipi_N_dispatch_register;
+ *index = 2;
+ break;
+ case 0x070:
+ *type = ipi_N_dispatch_register;
+ *index = 3;
+ break;
+ case 0x080:
+ *type = current_task_priority_register_N;
+ break;
+ case 0x0a0:
+ *type = interrupt_acknowledge_register_N;
+ break;
+ case 0x0b0:
+ *type = end_of_interrupt_register_N;
+ break;
+ default:
+ *type = invalid_opic_register;
+ break;
+ }
+ DTRACE(opic, ("per-processor register %d:0x%lx - %s[%d]\n",
+ space, (unsigned long)address,
+ opic_register_name(*type),
+ *index));
+ return;
+ }
+
+ /* try for an interrupt source unit */
+ for (isb = 0; isb < opic->nr_isu_blocks; isb++) {
+ if (opic->isu_block[isb].space == space
+ && address >= opic->isu_block[isb].address
+ && address < (opic->isu_block[isb].address + opic->isu_block[isb].size)) {
+ unsigned_word block_offset = address - opic->isu_block[isb].address;
+ unsigned_word offset = block_offset % sizeof_isu_register_block;
+ *index = (opic->isu_block[isb].int_number
+ + (block_offset / sizeof_isu_register_block));
+ switch (offset) {
+ case 0x00:
+ *type = interrupt_source_N_vector_priority_register;
+ break;
+ case 0x10:
+ *type = interrupt_source_N_destination_register;
+ break;
+ default:
+ *type = invalid_opic_register;
+ break;
+ }
+ DTRACE(opic, ("isu register %d:0x%lx - %s[%d]\n",
+ space, (unsigned long)address,
+ opic_register_name(*type),
+ *index));
+ return;
+ }
+ }
+
+ /* try for a timer */
+ if (space == opic->idu.space
+ && address >= (opic->idu.address + idu_timer_base)
+ && address < (opic->idu.address + idu_timer_base
+ + opic->nr_timer_interrupts * sizeof_timer_register_block)) {
+ unsigned_word offset = address % sizeof_timer_register_block;
+ *index = ((address - opic->idu.address - idu_timer_base)
+ / sizeof_timer_register_block);
+ switch (offset) {
+ case 0x00:
+ *type = timer_N_current_count_register;
+ break;
+ case 0x10:
+ *type = timer_N_base_count_register;
+ break;
+ case 0x20:
+ *type = timer_N_vector_priority_register;
+ break;
+ case 0x30:
+ *type = timer_N_destination_register;
+ break;
+ default:
+ *type = invalid_opic_register;
+ break;
+ }
+ DTRACE(opic, ("timer register %d:0x%lx - %s[%d]\n",
+ space, (unsigned long)address,
+ opic_register_name(*type),
+ *index));
+ return;
+ }
+
+ /* finally some other misc global register */
+ if (space == opic->idu.space
+ && address >= opic->idu.address
+ && address < opic->idu.address + opic->idu.size) {
+ unsigned_word block_offset = address - opic->idu.address;
+ switch (block_offset) {
+ case 0x010f0:
+ *type = timer_frequency_reporting_register;
+ *index = -1;
+ break;
+ case 0x010e0:
+ *type = spurious_vector_register;
+ *index = -1;
+ break;
+ case 0x010d0:
+ case 0x010c0:
+ case 0x010b0:
+ case 0x010a0:
+ *type = ipi_N_vector_priority_register;
+ *index = (block_offset - 0x010a0) / 16;
+ break;
+ case 0x01090:
+ *type = processor_init_register;
+ *index = -1;
+ break;
+ case 0x01080:
+ *type = vendor_identification_register;
+ *index = -1;
+ break;
+ case 0x01020:
+ *type = global_configuration_register_N;
+ *index = 0;
+ break;
+ case 0x01000:
+ *type = feature_reporting_register_N;
+ *index = 0;
+ break;
+ default:
+ *type = invalid_opic_register;
+ *index = -1;
+ break;
+ }
+ DTRACE(opic, ("global register %d:0x%lx - %s[%d]\n",
+ space, (unsigned long)address,
+ opic_register_name(*type),
+ *index));
+ return;
+ }
+
+ /* nothing matched */
+ *type = invalid_opic_register;
+ DTRACE(opic, ("invalid register %d:0x%lx\n",
+ space, (unsigned long)address));
+ return;
+}
+
+
+/* Processor init register:
+
+ The bits in this register (one per processor) are directly wired to
+ output "init" interrupt ports. */
+
+static unsigned
+do_processor_init_register_read(device *me,
+ hw_opic_device *opic)
+{
+ unsigned reg = opic->init;
+ DTRACE(opic, ("processor init register - read 0x%lx\n",
+ (long)reg));
+ return reg;
+}
+
+static void
+do_processor_init_register_write(device *me,
+ hw_opic_device *opic,
+ unsigned reg)
+{
+ int i;
+ for (i = 0; i < opic->nr_interrupt_destinations; i++) {
+ opic_interrupt_destination *dest = &opic->interrupt_destination[i];
+ if ((reg & dest->bit) != (opic->init & dest->bit)) {
+ if (reg & dest->bit) {
+ DTRACE(opic, ("processor init register - write 0x%lx - asserting init%d\n",
+ (long)reg, i));
+ opic->init |= dest->bit;
+ device_interrupt_event(me, dest->init_port, 1, NULL, 0);
+ }
+ else {
+ DTRACE(opic, ("processor init register - write 0x%lx - negating init%d\n",
+ (long)reg, i));
+ opic->init &= ~dest->bit;
+ device_interrupt_event(me, dest->init_port, 0, NULL, 0);
+ }
+ }
+ }
+}
+
+
+
+/* Interrupt Source Vector/Priority Register: */
+
+static unsigned
+read_vector_priority_register(device *me,
+ hw_opic_device *opic,
+ opic_interrupt_source *interrupt,
+ const char *reg_name,
+ int reg_index)
+{
+ unsigned reg;
+ reg = 0;
+ reg |= interrupt->is_masked;
+ reg |= (interrupt->in_service || interrupt->pending
+ ? isu_active_bit : 0); /* active */
+ reg |= interrupt->is_multicast;
+ reg |= interrupt->is_positive_polarity;
+ reg |= interrupt->is_level_triggered; /* sense? */
+ reg |= interrupt->priority << isu_priority_shift;
+ reg |= interrupt->vector;
+ DTRACE(opic, ("%s %d vector/priority register - read 0x%lx\n",
+ reg_name, reg_index, (unsigned long)reg));
+ return reg;
+}
+
+static unsigned
+do_interrupt_source_N_vector_priority_register_read(device *me,
+ hw_opic_device *opic,
+ int index)
+{
+ unsigned reg;
+ ASSERT(index < opic->nr_external_interrupts);
+ reg = read_vector_priority_register(me, opic,
+ &opic->interrupt_source[index],
+ "interrupt source", index);
+ return reg;
+}
+
+static void
+write_vector_priority_register(device *me,
+ hw_opic_device *opic,
+ opic_interrupt_source *interrupt,
+ unsigned reg,
+ const char *reg_name,
+ int reg_index)
+{
+ interrupt->is_masked = (reg & isu_mask_bit);
+ interrupt->is_multicast = (reg & isu_multicast_bit);
+ interrupt->is_positive_polarity = (reg & isu_positive_polarity_bit);
+ interrupt->is_level_triggered = (reg & isu_level_triggered_bit);
+ interrupt->priority = ((reg >> isu_priority_shift)
+ % max_nr_task_priorities);
+ interrupt->vector = (reg & isu_vector_bits);
+ DTRACE(opic, ("%s %d vector/priority register - write 0x%lx - %s%s%s-polarity, %s-triggered, priority %ld vector %ld\n",
+ reg_name,
+ reg_index,
+ (unsigned long)reg,
+ interrupt->is_masked ? "masked, " : "",
+ interrupt->is_multicast ? "multicast, " : "",
+ interrupt->is_positive_polarity ? "positive" : "negative",
+ interrupt->is_level_triggered ? "level" : "edge",
+ (long)interrupt->priority,
+ (long)interrupt->vector));
+}
+
+static void
+do_interrupt_source_N_vector_priority_register_write(device *me,
+ hw_opic_device *opic,
+ int index,
+ unsigned reg)
+{
+ ASSERT(index < opic->nr_external_interrupts);
+ reg &= ~isu_multicast_bit; /* disable multicast */
+ write_vector_priority_register(me, opic,
+ &opic->interrupt_source[index],
+ reg, "interrupt source", index);
+}
+
+
+
+/* Interrupt Source Destination Register: */
+
+static unsigned
+read_destination_register(device *me,
+ hw_opic_device *opic,
+ opic_interrupt_source *interrupt,
+ const char *reg_name,
+ int reg_index)
+{
+ unsigned long reg;
+ reg = interrupt->destination;
+ DTRACE(opic, ("%s %d destination register - read 0x%lx\n",
+ reg_name, reg_index, reg));
+ return reg;
+}
+
+static unsigned
+do_interrupt_source_N_destination_register_read(device *me,
+ hw_opic_device *opic,
+ int index)
+{
+ unsigned reg;
+ ASSERT(index < opic->nr_external_interrupts);
+ reg = read_destination_register(me, opic, &opic->external_interrupt_source[index],
+ "interrupt source", index);
+ return reg;
+}
+
+static void
+write_destination_register(device *me,
+ hw_opic_device *opic,
+ opic_interrupt_source *interrupt,
+ unsigned reg,
+ const char *reg_name,
+ int reg_index)
+{
+ reg &= (1 << opic->nr_interrupt_destinations) - 1; /* mask out invalid */
+ DTRACE(opic, ("%s %d destination register - write 0x%x\n",
+ reg_name, reg_index, reg));
+ interrupt->destination = reg;
+}
+
+static void
+do_interrupt_source_N_destination_register_write(device *me,
+ hw_opic_device *opic,
+ int index,
+ unsigned reg)
+{
+ ASSERT(index < opic->nr_external_interrupts);
+ write_destination_register(me, opic, &opic->external_interrupt_source[index],
+ reg, "interrupt source", index);
+}
+
+
+
+/* Spurious vector register: */
+
+static unsigned
+do_spurious_vector_register_read(device *me,
+ hw_opic_device *opic)
+{
+ unsigned long reg = opic->spurious_vector;
+ DTRACE(opic, ("spurious vector register - read 0x%lx\n", reg));
+ return reg;
+}
+
+static void
+do_spurious_vector_register_write(device *me,
+ hw_opic_device *opic,
+ unsigned reg)
+{
+ reg &= 0xff; /* mask off invalid */
+ DTRACE(opic, ("spurious vector register - write 0x%x\n", reg));
+ opic->spurious_vector = reg;
+}
+
+
+
+/* current task priority register: */
+
+static unsigned
+do_current_task_priority_register_N_read(device *me,
+ hw_opic_device *opic,
+ int index)
+{
+ opic_interrupt_destination *interrupt_destination = &opic->interrupt_destination[index];
+ unsigned reg;
+ ASSERT(index >= 0 && index < opic->nr_interrupt_destinations);
+ reg = interrupt_destination->base_priority;
+ DTRACE(opic, ("current task priority register %d - read 0x%x\n", index, reg));
+ return reg;
+}
+
+static void
+do_current_task_priority_register_N_write(device *me,
+ hw_opic_device *opic,
+ int index,
+ unsigned reg)
+{
+ opic_interrupt_destination *interrupt_destination = &opic->interrupt_destination[index];
+ ASSERT(index >= 0 && index < opic->nr_interrupt_destinations);
+ reg %= max_nr_task_priorities;
+ DTRACE(opic, ("current task priority register %d - write 0x%x\n", index, reg));
+ interrupt_destination->base_priority = reg;
+}
+
+
+
+/* Timer Frequency Reporting Register: */
+
+static unsigned
+do_timer_frequency_reporting_register_read(device *me,
+ hw_opic_device *opic)
+{
+ unsigned reg;
+ reg = opic->timer_frequency;
+ DTRACE(opic, ("timer frequency reporting register - read 0x%x\n", reg));
+ return reg;
+}
+
+static void
+do_timer_frequency_reporting_register_write(device *me,
+ hw_opic_device *opic,
+ unsigned reg)
+{
+ DTRACE(opic, ("timer frequency reporting register - write 0x%x\n", reg));
+ opic->timer_frequency = reg;
+}
+
+
+/* timer registers: */
+
+static unsigned
+do_timer_N_current_count_register_read(device *me,
+ hw_opic_device *opic,
+ int index)
+{
+ opic_timer *timer = &opic->timer[index];
+ unsigned reg;
+ ASSERT(index >= 0 && index < opic->nr_timer_interrupts);
+ if (timer->inhibited)
+ reg = timer->count; /* stalled value */
+ else
+ reg = timer->count - device_event_queue_time(me); /* time remaining */
+ DTRACE(opic, ("timer %d current count register - read 0x%x\n", index, reg));
+ return reg;
+}
+
+
+static unsigned
+do_timer_N_base_count_register_read(device *me,
+ hw_opic_device *opic,
+ int index)
+{
+ opic_timer *timer = &opic->timer[index];
+ unsigned reg;
+ ASSERT(index >= 0 && index < opic->nr_timer_interrupts);
+ reg = timer->base_count;
+ DTRACE(opic, ("timer %d base count register - read 0x%x\n", index, reg));
+ return reg;
+}
+
+
+static void
+timer_event(void *data)
+{
+ opic_timer *timer = data;
+ device *me = timer->me;
+ if (timer->inhibited)
+ device_error(timer->me, "internal-error - timer event occured when timer %d inhibited",
+ timer->nr);
+ handle_interrupt(timer->me, timer->opic, timer->interrupt_source, 1);
+ timer->timeout_event = device_event_queue_schedule(me, timer->base_count,
+ timer_event, timer);
+ DTRACE(opic, ("timer %d - interrupt at %ld, next at %d\n",
+ timer->nr, (long)device_event_queue_time(me), timer->base_count));
+}
+
+
+static void
+do_timer_N_base_count_register_write(device *me,
+ hw_opic_device *opic,
+ int index,
+ unsigned reg)
+{
+ opic_timer *timer = &opic->timer[index];
+ int inhibit;
+ ASSERT(index >= 0 && index < opic->nr_timer_interrupts);
+ inhibit = reg & 0x80000000;
+ if (timer->inhibited && !inhibit) {
+ timer->inhibited = 0;
+ if (timer->timeout_event != NULL)
+ device_event_queue_deschedule(me, timer->timeout_event);
+ timer->count = device_event_queue_time(me) + reg;
+ timer->base_count = reg;
+ timer->timeout_event = device_event_queue_schedule(me, timer->base_count,
+ timer_event, (void*)timer);
+ DTRACE(opic, ("timer %d base count register - write 0x%x - timer started\n",
+ index, reg));
+ }
+ else if (!timer->inhibited && inhibit) {
+ if (timer->timeout_event != NULL)
+ device_event_queue_deschedule(me, timer->timeout_event);
+ timer->count = timer->count - device_event_queue_time(me);
+ timer->inhibited = 1;
+ timer->base_count = reg;
+ DTRACE(opic, ("timer %d base count register - write 0x%x - timer stopped\n",
+ index, reg));
+ }
+ else {
+ ASSERT((timer->inhibited && inhibit) || (!timer->inhibited && !inhibit));
+ DTRACE(opic, ("timer %d base count register - write 0x%x\n", index, reg));
+ timer->base_count = reg;
+ }
+}
+
+
+static unsigned
+do_timer_N_vector_priority_register_read(device *me,
+ hw_opic_device *opic,
+ int index)
+{
+ unsigned reg;
+ ASSERT(index >= 0 && index < opic->nr_timer_interrupts);
+ reg = read_vector_priority_register(me, opic,
+ &opic->timer_interrupt_source[index],
+ "timer", index);
+ return reg;
+}
+
+static void
+do_timer_N_vector_priority_register_write(device *me,
+ hw_opic_device *opic,
+ int index,
+ unsigned reg)
+{
+ ASSERT(index >= 0 && index < opic->nr_timer_interrupts);
+ reg &= ~isu_level_triggered_bit; /* force edge trigger */
+ reg |= isu_positive_polarity_bit; /* force rising (positive) edge */
+ reg |= isu_multicast_bit; /* force multicast */
+ write_vector_priority_register(me, opic,
+ &opic->timer_interrupt_source[index],
+ reg, "timer", index);
+}
+
+
+static unsigned
+do_timer_N_destination_register_read(device *me,
+ hw_opic_device *opic,
+ int index)
+{
+ unsigned reg;
+ ASSERT(index >= 0 && index < opic->nr_timer_interrupts);
+ reg = read_destination_register(me, opic, &opic->timer_interrupt_source[index],
+ "timer", index);
+ return reg;
+}
+
+static void
+do_timer_N_destination_register_write(device *me,
+ hw_opic_device *opic,
+ int index,
+ unsigned reg)
+{
+ ASSERT(index >= 0 && index < opic->nr_timer_interrupts);
+ write_destination_register(me, opic, &opic->timer_interrupt_source[index],
+ reg, "timer", index);
+}
+
+
+/* IPI registers */
+
+static unsigned
+do_ipi_N_vector_priority_register_read(device *me,
+ hw_opic_device *opic,
+ int index)
+{
+ unsigned reg;
+ ASSERT(index >= 0 && index < opic->nr_interprocessor_interrupts);
+ reg = read_vector_priority_register(me, opic,
+ &opic->interprocessor_interrupt_source[index],
+ "ipi", index);
+ return reg;
+}
+
+static void
+do_ipi_N_vector_priority_register_write(device *me,
+ hw_opic_device *opic,
+ int index,
+ unsigned reg)
+{
+ ASSERT(index >= 0 && index < opic->nr_interprocessor_interrupts);
+ reg &= ~isu_level_triggered_bit; /* force edge trigger */
+ reg |= isu_positive_polarity_bit; /* force rising (positive) edge */
+ reg |= isu_multicast_bit; /* force a multicast source */
+ write_vector_priority_register(me, opic,
+ &opic->interprocessor_interrupt_source[index],
+ reg, "ipi", index);
+}
+
+static void
+do_ipi_N_dispatch_register_write(device *me,
+ hw_opic_device *opic,
+ int index,
+ unsigned reg)
+{
+ opic_interrupt_source *source = &opic->interprocessor_interrupt_source[index];
+ ASSERT(index >= 0 && index < opic->nr_interprocessor_interrupts);
+ DTRACE(opic, ("ipi %d interrupt dispatch register - write 0x%x\n", index, reg));
+ source->destination = reg;
+ handle_interrupt(me, opic, source, 1);
+}
+
+
+/* vendor and other global registers */
+
+static unsigned
+do_vendor_identification_register_read(device *me,
+ hw_opic_device *opic)
+{
+ unsigned reg;
+ reg = opic->vendor_identification;
+ DTRACE(opic, ("vendor identification register - read 0x%x\n", reg));
+ return reg;
+}
+
+static unsigned
+do_feature_reporting_register_N_read(device *me,
+ hw_opic_device *opic,
+ int index)
+{
+ unsigned reg = 0;
+ ASSERT(index == 0);
+ switch (index) {
+ case 0:
+ reg |= (opic->nr_external_interrupts << 16);
+ reg |= (opic->nr_interrupt_destinations << 8);
+ reg |= (2/*version 1.2*/);
+ break;
+ }
+ DTRACE(opic, ("feature reporting register %d - read 0x%x\n", index, reg));
+ return reg;
+}
+
+static unsigned
+do_global_configuration_register_N_read(device *me,
+ hw_opic_device *opic,
+ int index)
+{
+ unsigned reg = 0;
+ ASSERT(index == 0);
+ switch (index) {
+ case 0:
+ reg |= gcr0_8259_bit; /* hardwire 8259 disabled */
+ break;
+ }
+ DTRACE(opic, ("global configuration register %d - read 0x%x\n", index, reg));
+ return reg;
+}
+
+static void
+do_global_configuration_register_N_write(device *me,
+ hw_opic_device *opic,
+ int index,
+ unsigned reg)
+{
+ ASSERT(index == 0);
+ if (reg & gcr0_reset_bit) {
+ DTRACE(opic, ("global configuration register %d - write 0x%x - reseting opic\n", index, reg));
+ hw_opic_init_data(me);
+ }
+ if (!(reg & gcr0_8259_bit)) {
+ DTRACE(opic, ("global configuration register %d - write 0x%x - ignoring 8259 enable\n", index, reg));
+ }
+}
+
+
+
+/* register read-write */
+
+static unsigned
+hw_opic_io_read_buffer(device *me,
+ void *dest,
+ int space,
+ unsigned_word addr,
+ unsigned nr_bytes,
+ cpu *processor,
+ unsigned_word cia)
+{
+ hw_opic_device *opic = (hw_opic_device*)device_data(me);
+ opic_register type;
+ int index;
+ decode_opic_address(me, opic, space, addr, nr_bytes, &type, &index);
+ if (type == invalid_opic_register) {
+ device_error(me, "invalid opic read access to %d:0x%lx (%d bytes)",
+ space, (unsigned long)addr, nr_bytes);
+ }
+ else {
+ unsigned reg;
+ switch (type) {
+ case processor_init_register:
+ reg = do_processor_init_register_read(me, opic);
+ break;
+ case interrupt_source_N_vector_priority_register:
+ reg = do_interrupt_source_N_vector_priority_register_read(me, opic, index);
+ break;
+ case interrupt_source_N_destination_register:
+ reg = do_interrupt_source_N_destination_register_read(me, opic, index);
+ break;
+ case interrupt_acknowledge_register_N:
+ reg = do_interrupt_acknowledge_register_N_read(me, opic, index);
+ break;
+ case spurious_vector_register:
+ reg = do_spurious_vector_register_read(me, opic);
+ break;
+ case current_task_priority_register_N:
+ reg = do_current_task_priority_register_N_read(me, opic, index);
+ break;
+ case timer_frequency_reporting_register:
+ reg = do_timer_frequency_reporting_register_read(me, opic);
+ break;
+ case timer_N_current_count_register:
+ reg = do_timer_N_current_count_register_read(me, opic, index);
+ break;
+ case timer_N_base_count_register:
+ reg = do_timer_N_base_count_register_read(me, opic, index);
+ break;
+ case timer_N_vector_priority_register:
+ reg = do_timer_N_vector_priority_register_read(me, opic, index);
+ break;
+ case timer_N_destination_register:
+ reg = do_timer_N_destination_register_read(me, opic, index);
+ break;
+ case ipi_N_vector_priority_register:
+ reg = do_ipi_N_vector_priority_register_read(me, opic, index);
+ break;
+ case feature_reporting_register_N:
+ reg = do_feature_reporting_register_N_read(me, opic, index);
+ break;
+ case global_configuration_register_N:
+ reg = do_global_configuration_register_N_read(me, opic, index);
+ break;
+ case vendor_identification_register:
+ reg = do_vendor_identification_register_read(me, opic);
+ break;
+ default:
+ reg = 0;
+ device_error(me, "unimplemented read of register %s[%d]",
+ opic_register_name(type), index);
+ }
+ *(unsigned_4*)dest = H2LE_4(reg);
+ }
+ return nr_bytes;
+}
+
+
+static unsigned
+hw_opic_io_write_buffer(device *me,
+ const void *source,
+ int space,
+ unsigned_word addr,
+ unsigned nr_bytes,
+ cpu *processor,
+ unsigned_word cia)
+{
+ hw_opic_device *opic = (hw_opic_device*)device_data(me);
+ opic_register type;
+ int index;
+ decode_opic_address(me, opic, space, addr, nr_bytes, &type, &index);
+ if (type == invalid_opic_register) {
+ device_error(me, "invalid opic write access to %d:0x%lx (%d bytes)",
+ space, (unsigned long)addr, nr_bytes);
+ }
+ else {
+ unsigned reg = LE2H_4(*(unsigned_4*)source);
+ switch (type) {
+ case processor_init_register:
+ do_processor_init_register_write(me, opic, reg);
+ break;
+ case interrupt_source_N_vector_priority_register:
+ do_interrupt_source_N_vector_priority_register_write(me, opic, index, reg);
+ break;
+ case interrupt_source_N_destination_register:
+ do_interrupt_source_N_destination_register_write(me, opic, index, reg);
+ break;
+ case end_of_interrupt_register_N:
+ do_end_of_interrupt_register_N_write(me, opic, index, reg);
+ break;
+ case spurious_vector_register:
+ do_spurious_vector_register_write(me, opic, reg);
+ break;
+ case current_task_priority_register_N:
+ do_current_task_priority_register_N_write(me, opic, index, reg);
+ break;
+ case timer_frequency_reporting_register:
+ do_timer_frequency_reporting_register_write(me, opic, reg);
+ break;
+ case timer_N_base_count_register:
+ do_timer_N_base_count_register_write(me, opic, index, reg);
+ break;
+ case timer_N_vector_priority_register:
+ do_timer_N_vector_priority_register_write(me, opic, index, reg);
+ break;
+ case timer_N_destination_register:
+ do_timer_N_destination_register_write(me, opic, index, reg);
+ break;
+ case ipi_N_dispatch_register:
+ do_ipi_N_dispatch_register_write(me, opic, index, reg);
+ break;
+ case ipi_N_vector_priority_register:
+ do_ipi_N_vector_priority_register_write(me, opic, index, reg);
+ break;
+ case global_configuration_register_N:
+ do_global_configuration_register_N_write(me, opic, index, reg);
+ break;
+ default:
+ device_error(me, "unimplemented write to register %s[%d]",
+ opic_register_name(type), index);
+ }
+ }
+ return nr_bytes;
+}
+
+
+static void
+hw_opic_interrupt_event(device *me,
+ int my_port,
+ device *source,
+ int source_port,
+ int level,
+ cpu *processor,
+ unsigned_word cia)
+{
+ hw_opic_device *opic = (hw_opic_device*)device_data(me);
+
+ int isb;
+ int src_nr = 0;
+
+ /* find the corresponding internal input port */
+ for (isb = 0; isb < opic->nr_isu_blocks; isb++) {
+ if (my_port >= opic->isu_block[isb].int_number
+ && my_port < opic->isu_block[isb].int_number + opic->isu_block[isb].range) {
+ src_nr += my_port - opic->isu_block[isb].int_number;
+ break;
+ }
+ else
+ src_nr += opic->isu_block[isb].range;
+ }
+ if (isb == opic->nr_isu_blocks)
+ device_error(me, "interrupt %d out of range", my_port);
+ DTRACE(opic, ("external-interrupt %d, internal %d, level %d\n",
+ my_port, src_nr, level));
+
+ /* pass it on */
+ ASSERT(src_nr >= 0 && src_nr < opic->nr_external_interrupts);
+ handle_interrupt(me, opic, &opic->external_interrupt_source[src_nr], level);
+}
+
+
+static const device_interrupt_port_descriptor hw_opic_interrupt_ports[] = {
+ { "irq", 0, max_nr_interrupt_sources, input_port, },
+ { "intr", 0, max_nr_interrupt_destinations, output_port, },
+ { "init", max_nr_interrupt_destinations, max_nr_interrupt_destinations, output_port, },
+ { NULL }
+};
+
+
+static device_callbacks const hw_opic_callbacks = {
+ { generic_device_init_address,
+ hw_opic_init_data },
+ { NULL, }, /* address */
+ { hw_opic_io_read_buffer,
+ hw_opic_io_write_buffer }, /* IO */
+ { NULL, }, /* DMA */
+ { hw_opic_interrupt_event, NULL, hw_opic_interrupt_ports }, /* interrupt */
+ { NULL, }, /* unit */
+ NULL, /* instance */
+};
+
+static void *
+hw_opic_create(const char *name,
+ const device_unit *unit_address,
+ const char *args)
+{
+ hw_opic_device *opic = ZALLOC(hw_opic_device);
+ return opic;
+}
+
+
+
+const device_descriptor hw_opic_device_descriptor[] = {
+ { "opic", hw_opic_create, &hw_opic_callbacks },
+ { NULL },
+};
+
+#endif /* _HW_OPIC_C_ */
diff --git a/sim/ppc/hw_pic.c b/sim/ppc/hw_pic.c
deleted file mode 100644
index 3203f8c..0000000
--- a/sim/ppc/hw_pic.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/* ICU device: icu@<address>
-
- <address> : read - processor nr
- <address> : write - interrupt processor nr
- <address> + 4 : read - nr processors
-
- Single byte registers that control a simple ICU.
-
- Illustrates passing of events to parent device. Passing of
- interrupts to an interrupt destination. */
-
-
-static unsigned
-icu_io_read_buffer_callback(device *me,
- void *dest,
- int space,
- unsigned_word addr,
- unsigned nr_bytes,
- cpu *processor,
- unsigned_word cia)
-{
- memset(dest, 0, nr_bytes);
- switch (addr & 4) {
- case 0:
- *(unsigned_1*)dest = cpu_nr(processor);
- break;
- case 4:
- *(unsigned_1*)dest =
- device_find_integer_property(me, "/openprom/options/smp");
- break;
- }
- return nr_bytes;
-}
-
-
-static unsigned
-icu_io_write_buffer_callback(device *me,
- const void *source,
- int space,
- unsigned_word addr,
- unsigned nr_bytes,
- cpu *processor,
- unsigned_word cia)
-{
- unsigned_1 val = H2T_1(*(unsigned_1*)source);
- /* tell the parent device that the interrupt lines have changed.
- For this fake ICU. The interrupt lines just indicate the cpu to
- interrupt next */
- device_interrupt_event(me,
- val, /*my_port*/
- val, /*val*/
- processor, cia);
- return nr_bytes;
-}
-
-static void
-icu_do_interrupt(event_queue *queue,
- void *data)
-{
- cpu *target = (cpu*)data;
- /* try to interrupt the processor. If the attempt fails, try again
- on the next tick */
- if (!external_interrupt(target))
- event_queue_schedule(queue, 1, icu_do_interrupt, target);
-}
-
-
-static void
-icu_interrupt_event_callback(device *me,
- int my_port,
- device *source,
- int source_port,
- int level,
- cpu *processor,
- unsigned_word cia)
-{
- /* the interrupt controller can't interrupt a cpu at any time.
- Rather it must synchronize with the system clock before
- performing an interrupt on the given processor */
- psim *system = cpu_system(processor);
- cpu *target = psim_cpu(system, my_port);
- if (target != NULL) {
- event_queue *events = cpu_event_queue(target);
- event_queue_schedule(events, 1, icu_do_interrupt, target);
- }
-}
-
-static device_callbacks const icu_callbacks = {
- { generic_device_init_address, },
- { NULL, }, /* address */
- { icu_io_read_buffer_callback,
- icu_io_write_buffer_callback, },
- { NULL, }, /* DMA */
- { icu_interrupt_event_callback, },
- { NULL, }, /* unit */
-};
-
-
diff --git a/sim/ppc/hw_trace.c b/sim/ppc/hw_trace.c
new file mode 100644
index 0000000..be2c3c4
--- /dev/null
+++ b/sim/ppc/hw_trace.c
@@ -0,0 +1,108 @@
+/* This file is part of the program psim.
+
+ Copyright (C) 1994-1996, Andrew Cagney <cagney@highland.com.au>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+ */
+
+
+#ifndef _HW_TRACE_C_
+#define _HW_TRACE_C_
+
+#include "device_table.h"
+#include <stdarg.h>
+
+/* DEVICE
+
+ trace - the properties of this dummy device specify trace options
+
+ DESCRIPTION
+
+ The properties of this device are used, during initialization, to
+ specify the value various simulation trace options. The
+ initialization can occure implicitly (during device tree init) or
+ explicitly using this devices ioctl method.
+
+ The actual options and their default values (for a given target)
+ are defined in the file debug.
+
+ This device is normally a child of the /openprom node.
+
+ EXAMPLE
+
+ The trace option dump-device-tree can be enabled by specifying the
+ option:
+
+ | -o '/openprom/trace/dump-device-tree 0x1'
+
+ Alternativly the shorthand version:
+
+ | -t dump-device-tree
+
+ can be used. */
+
+static void
+hw_trace_init_data(device *me)
+{
+ const device_property *prop = device_find_property(me, NULL);
+ while (prop != NULL) {
+ const char *name = prop->name;
+ unsigned32 value = device_find_integer_property(me, name);
+ trace_option(name, value);
+ prop = device_next_property(prop);
+ }
+}
+
+
+/* Hook to allow the (re) initialization of the trace options at any
+ time */
+
+static int
+hw_trace_ioctl(device *me,
+ cpu *processor,
+ unsigned_word cia,
+ device_ioctl_request request,
+ va_list ap)
+{
+ switch (request) {
+ case device_ioctl_set_trace:
+ hw_trace_init_data(me);
+ break;
+ default:
+ device_error(me, "insupported ioctl request");
+ break;
+ }
+ return 0;
+}
+
+
+static device_callbacks const hw_trace_callbacks = {
+ { NULL, hw_trace_init_data, }, /* init */
+ { NULL, }, /* address */
+ { NULL, }, /* IO */
+ { NULL, }, /* DMA */
+ { NULL, }, /* interrupt */
+ { NULL, }, /* unit */
+ NULL, /* instance-create */
+ hw_trace_ioctl,
+};
+
+const device_descriptor hw_trace_device_descriptor[] = {
+ { "trace", NULL, &hw_trace_callbacks },
+ { NULL },
+};
+
+#endif _HW_TRACE_C_
diff --git a/sim/ppc/tree.h b/sim/ppc/tree.h
new file mode 100644
index 0000000..46590cb
--- /dev/null
+++ b/sim/ppc/tree.h
@@ -0,0 +1,139 @@
+/* This file is part of the program psim.
+
+ Copyright (C) 1994-1996, Andrew Cagney <cagney@highland.com.au>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+ */
+
+
+#ifndef _TREE_H_
+#define _TREE_H_
+
+#ifndef INLINE_TREE
+#define INLINE_TREE
+#endif
+
+/* Constructing the device tree:
+
+ The initial device tree populated with devices and basic properties
+ is created using the function <<device_tree_add_parsed()>>. This
+ function parses a PSIM device specification and uses it to populate
+ the tree accordingly.
+
+ This function accepts a printf style formatted string as the
+ argument that describes the entry. Any properties or interrupt
+ connections added to a device tree using this function are marked
+ as having a permenant disposition. When the tree is (re)
+ initialized they will be restored to their initial value.
+
+ */
+
+EXTERN_TREE\
+(device *) tree_parse
+(device *root,
+ const char *fmt,
+ ...) __attribute__ ((format (printf, 2, 3)));
+
+
+INLINE_TREE\
+(void) tree_usage
+(int verbose);
+
+INLINE_TREE\
+(void) tree_print
+(device *root);
+
+INLINE_TREE\
+(device_instance*) tree_instance
+(device *root,
+ const char *device_specifier);
+
+
+/* Tree traversal::
+
+ The entire device tree can be traversed using the
+ <<device_tree_traverse()>> function. The traversal can be in
+ either pre- or postfix order.
+
+ */
+
+typedef void (tree_traverse_function)
+ (device *device,
+ void *data);
+
+INLINE_DEVICE\
+(void) tree_traverse
+(device *root,
+ tree_traverse_function *prefix,
+ tree_traverse_function *postfix,
+ void *data);
+
+
+/* Tree lookup::
+
+ The function <<tree_find_device()>> will attempt to locate
+ the specified device within the tree. If the device is not found a
+ NULL device is returned.
+
+ */
+
+INLINE_TREE\
+(device *) tree_find_device
+(device *root,
+ const char *path);
+
+
+INLINE_TREE\
+(const device_property *) tree_find_property
+(device *root,
+ const char *path_to_property);
+
+INLINE_TREE\
+(int) tree_find_boolean_property
+(device *root,
+ const char *path_to_property);
+
+INLINE_TREE\
+(signed_cell) tree_find_integer_property
+(device *root,
+ const char *path_to_property);
+
+INLINE_TREE\
+(device_instance *) tree_find_ihandle_property
+(device *root,
+ const char *path_to_property);
+
+INLINE_TREE\
+(const char *) tree_find_string_property
+(device *root,
+ const char *path_to_property);
+
+
+/* Initializing the created tree:
+
+ Once a device tree has been created the <<device_tree_init()>>
+ function is used to initialize it. The exact sequence of events
+ that occure during initialization are described separatly.
+
+ */
+
+INLINE_TREE\
+(void) tree_init
+(device *root,
+ psim *system);
+
+
+#endif /* _TREE_H_ */