# Makefile.in generated by automake 1.11.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software # Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ am__make_dryrun = \ { \ am__dry=no; \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ *) \ for am__flg in $$MAKEFLAGS; do \ case $$am__flg in \ *=*|--*) ;; \ *n*) am__dry=yes; break;; \ esac; \ done;; \ esac; \ test $$am__dry = yes; \ } pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ target_triplet = @target@ DIST_COMMON = $(top_srcdir)/fragment.am $(srcdir)/Makefile.in \ $(srcdir)/Makefile.am subdir = testsuite ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \ $(top_srcdir)/../config/enable.m4 \ $(top_srcdir)/../config/futex.m4 \ $(top_srcdir)/../config/hwcaps.m4 \ $(top_srcdir)/../config/iconv.m4 \ $(top_srcdir)/../config/lead-dot.m4 \ $(top_srcdir)/../config/lib-ld.m4 \ $(top_srcdir)/../config/lib-link.m4 \ $(top_srcdir)/../config/lib-prefix.m4 \ $(top_srcdir)/../config/lthostflags.m4 \ $(top_srcdir)/../config/multi.m4 \ $(top_srcdir)/../config/no-executables.m4 \ $(top_srcdir)/../config/override.m4 \ $(top_srcdir)/../config/stdint.m4 \ $(top_srcdir)/../config/unwind_ipinfo.m4 \ $(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \ $(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \ $(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/crossconfig.m4 \ $(top_srcdir)/linkage.m4 $(top_srcdir)/acinclude.m4 \ $(top_srcdir)/../config/gc++filt.m4 \ $(top_srcdir)/../config/tls.m4 $(top_srcdir)/../config/gthr.m4 \ $(top_srcdir)/../config/cet.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = depcomp = am__depfiles_maybe = SOURCES = am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac ABI_TWEAKS_SRCDIR = @ABI_TWEAKS_SRCDIR@ ACLOCAL = @ACLOCAL@ ALLOCATOR_H = @ALLOCATOR_H@ ALLOCATOR_NAME = @ALLOCATOR_NAME@ AMTAR = @AMTAR@ AR = @AR@ AS = @AS@ ATOMICITY_SRCDIR = @ATOMICITY_SRCDIR@ ATOMIC_FLAGS = @ATOMIC_FLAGS@ ATOMIC_WORD_SRCDIR = @ATOMIC_WORD_SRCDIR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BASIC_FILE_CC = @BASIC_FILE_CC@ BASIC_FILE_H = @BASIC_FILE_H@ CC = @CC@ CCODECVT_CC = @CCODECVT_CC@ CCOLLATE_CC = @CCOLLATE_CC@ CCTYPE_CC = @CCTYPE_CC@ CFLAGS = @CFLAGS@ CLOCALE_CC = @CLOCALE_CC@ CLOCALE_H = @CLOCALE_H@ CLOCALE_INTERNAL_H = @CLOCALE_INTERNAL_H@ CMESSAGES_CC = @CMESSAGES_CC@ CMESSAGES_H = @CMESSAGES_H@ CMONEY_CC = @CMONEY_CC@ CNUMERIC_CC = @CNUMERIC_CC@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CPU_DEFINES_SRCDIR = @CPU_DEFINES_SRCDIR@ CPU_OPT_BITS_RANDOM = @CPU_OPT_BITS_RANDOM@ CPU_OPT_EXT_RANDOM = @CPU_OPT_EXT_RANDOM@ CSTDIO_H = @CSTDIO_H@ CTIME_CC = @CTIME_CC@ CTIME_H = @CTIME_H@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXFILT = @CXXFILT@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ C_INCLUDE_DIR = @C_INCLUDE_DIR@ DBLATEX = @DBLATEX@ DEBUG_FLAGS = @DEBUG_FLAGS@ DEFS = @DEFS@ DOT = @DOT@ DOXYGEN = @DOXYGEN@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ ERROR_CONSTANTS_SRCDIR = @ERROR_CONSTANTS_SRCDIR@ EXEEXT = @EXEEXT@ EXTRA_CFLAGS = @EXTRA_CFLAGS@ EXTRA_CXX_FLAGS = @EXTRA_CXX_FLAGS@ FGREP = @FGREP@ GLIBCXX_INCLUDES = @GLIBCXX_INCLUDES@ GLIBCXX_LIBS = @GLIBCXX_LIBS@ GREP = @GREP@ HWCAP_CFLAGS = @HWCAP_CFLAGS@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBICONV = @LIBICONV@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LONG_DOUBLE_COMPAT_FLAGS = @LONG_DOUBLE_COMPAT_FLAGS@ LTLIBICONV = @LTLIBICONV@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OPTIMIZE_CXXFLAGS = @OPTIMIZE_CXXFLAGS@ OPT_LDFLAGS = @OPT_LDFLAGS@ OS_INC_SRCDIR = @OS_INC_SRCDIR@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PDFLATEX = @PDFLATEX@ RANLIB = @RANLIB@ SECTION_FLAGS = @SECTION_FLAGS@ SECTION_LDFLAGS = @SECTION_LDFLAGS@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ SYMVER_FILE = @SYMVER_FILE@ TOPLEVEL_INCLUDES = @TOPLEVEL_INCLUDES@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ VTV_CXXFLAGS = @VTV_CXXFLAGS@ VTV_CXXLINKFLAGS = @VTV_CXXLINKFLAGS@ VTV_PCH_CXXFLAGS = @VTV_PCH_CXXFLAGS@ WARN_FLAGS = @WARN_FLAGS@ WERROR = @WERROR@ XMLLINT = @XMLLINT@ XSLTPROC = @XSLTPROC@ XSL_STYLE_DIR = @XSL_STYLE_DIR@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__leading_dot = @am__leading_dot@ am__tar = @am__tar@ am__untar = @am__untar@ baseline_dir = @baseline_dir@ baseline_subdir_switch = @baseline_subdir_switch@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ check_msgfmt = @check_msgfmt@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ enable_shared = @enable_shared@ enable_static = @enable_static@ exec_prefix = @exec_prefix@ get_gcc_base_ver = @get_gcc_base_ver@ glibcxx_MOFILES = @glibcxx_MOFILES@ glibcxx_PCHFLAGS = @glibcxx_PCHFLAGS@ glibcxx_POFILES = @glibcxx_POFILES@ glibcxx_builddir = @glibcxx_builddir@ glibcxx_compiler_pic_flag = @glibcxx_compiler_pic_flag@ glibcxx_compiler_shared_flag = @glibcxx_compiler_shared_flag@ glibcxx_cxx98_abi = @glibcxx_cxx98_abi@ glibcxx_localedir = @glibcxx_localedir@ glibcxx_lt_pic_flag = @glibcxx_lt_pic_flag@ glibcxx_prefixdir = @glibcxx_prefixdir@ glibcxx_srcdir = @glibcxx_srcdir@ glibcxx_toolexecdir = @glibcxx_toolexecdir@ glibcxx_toolexeclibdir = @glibcxx_toolexeclibdir@ gxx_include_dir = @gxx_include_dir@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ libtool_VERSION = @libtool_VERSION@ localedir = @localedir@ localstatedir = @localstatedir@ lt_host_flags = @lt_host_flags@ mandir = @mandir@ mkdir_p = @mkdir_p@ multi_basedir = @multi_basedir@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ port_specific_symbol_files = @port_specific_symbol_files@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ python_mod_dir = @python_mod_dir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target = @target@ target_alias = @target_alias@ target_cpu = @target_cpu@ target_os = @target_os@ target_vendor = @target_vendor@ thread_header = @thread_header@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ toplevel_builddir = @toplevel_builddir@ toplevel_srcdir = @toplevel_srcdir@ AUTOMAKE_OPTIONS = nostdinc RUNTESTDEFAULTFLAGS = --tool $$tool --srcdir $$srcdir EXPECT = expect # May be used by various substitution variables. gcc_version := $(shell @get_gcc_base_ver@ $(top_srcdir)/../gcc/BASE-VER) MAINT_CHARSET = latin1 mkinstalldirs = $(SHELL) $(toplevel_srcdir)/mkinstalldirs PWD_COMMAND = $${PWDCMD-pwd} STAMP = echo timestamp > toolexecdir = $(glibcxx_toolexecdir) toolexeclibdir = $(glibcxx_toolexeclibdir) @ENABLE_WERROR_FALSE@WERROR_FLAG = @ENABLE_WERROR_TRUE@WERROR_FLAG = $(WERROR) @ENABLE_EXTERN_TEMPLATE_FALSE@XTEMPLATE_FLAGS = @ENABLE_EXTERN_TEMPLATE_TRUE@XTEMPLATE_FLAGS = -fno-implicit-templates # These bits are all figured out from configure. Look in acinclude.m4 # or configure.ac to see how they are set. See GLIBCXX_EXPORT_FLAGS. CONFIG_CXXFLAGS = \ $(SECTION_FLAGS) $(HWCAP_CFLAGS) -frandom-seed=$@ WARN_CXXFLAGS = \ $(WARN_FLAGS) $(WERROR_FLAG) -fdiagnostics-show-location=once # -I/-D flags to pass when compiling. AM_CPPFLAGS = $(GLIBCXX_INCLUDES) $(CPPFLAGS) # Generated lists of files to run. All of these names are valid make # targets, if you wish to generate a list manually. lists_of_files = \ testsuite_files \ testsuite_files_interactive \ testsuite_files_performance extract_symvers = $(glibcxx_builddir)/scripts/extract_symvers baseline_subdir := $(shell $(CXX) $(baseline_subdir_switch)) check_p_numbers0 := 1 2 3 4 5 6 7 8 9 check_p_numbers1 := 0 $(check_p_numbers0) check_p_numbers2 := $(foreach i,$(check_p_numbers0),$(addprefix $(i),$(check_p_numbers1))) check_p_numbers3 := $(addprefix 0,$(check_p_numbers1)) $(check_p_numbers2) check_p_numbers4 := $(foreach i,$(check_p_numbers0),$(addprefix $(i),$(check_p_numbers3))) check_p_numbers5 := $(addprefix 0,$(check_p_numbers3)) $(check_p_numbers4) check_p_numbers6 := $(foreach i,$(check_p_numbers0),$(addprefix $(i),$(check_p_numbers5))) check_p_numbers := $(check_p_numbers0) $(check_p_numbers2) $(check_p_numbers4) $(check_p_numbers6) check_p_subdirs = $(wordlist 1,$(if $(GCC_TEST_PARALLEL_SLOTS),$(GCC_TEST_PARALLEL_SLOTS),128),$(check_p_numbers)) check_DEJAGNU_normal_targets = $(addprefix check-DEJAGNUnormal,$(check_p_subdirs)) # Runs the testsuite, but in compile only mode. # Can be used to test sources with non-GNU FE's at various warning # levels and for checking compile time across releases. # See script. compile_script = ${glibcxx_srcdir}/scripts/check_compile # Runs the testsuite/performance tests. # Some of these tests create large (~75MB) files, allocate huge # ammounts of memory, or otherwise tie up machine resources. Thus, # running this is off by default. # XXX Need to add dependency on libtestc++.a check_performance_script = ${glibcxx_srcdir}/scripts/check_performance # Runs the testsuite in debug mode. debug_flags = "unix/-D_GLIBCXX_DEBUG" # Runs the testsuite in parallel mode. libgomp_dir = ${glibcxx_builddir}/../libgomp libgomp_flags = -B${glibcxx_builddir}/../libgomp \ -I${glibcxx_builddir}/../libgomp \ -L${glibcxx_builddir}/../libgomp/.libs -lgomp atomic_flags = $(ATOMIC_FLAGS) parallel_flags = "unix/-D_GLIBCXX_PARALLEL/-fopenmp" # Runs the testsuite in profile mode. profile_flags = "unix/-D_GLIBCXX_PROFILE" # By adding these files here, automake will remove them for 'make clean' CLEANFILES = *.txt *.tst *.exe core* filebuf_* tmp* ostream_* *.log *.sum \ testsuite_* site.exp abi_check baseline_symbols *TEST* *.dat \ *.ii *.s *.o *.cc *.x *.a *.so *.xml *.raw *.out *.gdb all: all-am .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/fragment.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign --ignore-deps testsuite/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign --ignore-deps testsuite/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_srcdir)/fragment.am: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs tags: TAGS TAGS: ctags: CTAGS CTAGS: check-am: all-am check: check-am all-am: Makefile installdirs: install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool clean-local mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic clean-libtool \ clean-local distclean distclean-generic distclean-libtool dvi \ dvi-am html html-am info info-am install install-am \ install-data install-data-am install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-info install-info-am install-man install-pdf \ install-pdf-am install-ps install-ps-am install-strip \ installcheck installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am # This rule generates all of the testsuite_files* lists at once. ${lists_of_files}: ${glibcxx_srcdir}/scripts/create_testsuite_files \ ${glibcxx_srcdir}/testsuite `${PWD_COMMAND}` # We need more things in site.exp, but automake completely controls the # creation of that file; there's no way to append to it without messing up # the dependancy chains. So we overrule automake. This rule is exactly # what it would have generated, plus our own additions. site.exp: Makefile @echo 'Making a new site.exp file...' @echo '## these variables are automatically generated by make ##' >site.tmp @echo '# Do not edit here. If you wish to override these values' >>site.tmp @echo '# edit the last section' >>site.tmp @echo 'set srcdir $(srcdir)' >>site.tmp @echo "set objdir `pwd`" >>site.tmp @echo 'set build_alias "$(build_alias)"' >>site.tmp @echo 'set build_triplet $(build_triplet)' >>site.tmp @echo 'set host_alias "$(host_alias)"' >>site.tmp @echo 'set host_triplet $(host_triplet)' >>site.tmp @echo 'set target_alias "$(target_alias)"' >>site.tmp @echo 'set target_triplet $(target_triplet)' >>site.tmp @echo 'set target_triplet $(target_triplet)' >>site.tmp @echo 'set libiconv "$(LIBICONV)"' >>site.tmp @echo 'set baseline_dir "$(baseline_dir)"' >> site.tmp @echo 'set baseline_subdir_switch "$(baseline_subdir_switch)"' >> site.tmp @echo 'set TEST_GCC_EXEC_PREFIX "$(libdir)/gcc/"' >> site.tmp @echo '## All variables above are generated by configure. Do Not Edit ##' >>site.tmp @test ! -f site.exp || \ sed '1,/^## All variables above are.*##/ d' site.exp >> site.tmp @-rm -f site.bak @test ! -f site.exp || mv site.exp site.bak @mv site.tmp site.exp baseline_symbols: -@(output=${baseline_dir}/${baseline_subdir}/baseline_symbols.txt; \ if test ! -f $${output}; then \ echo "Baseline file doesn't exist."; \ echo "Try 'make new-abi-baseline' to create it."; \ exit 1; \ fi; true) new-abi-baseline: -@$(mkinstalldirs) ${baseline_dir}/${baseline_subdir} -@(output=${baseline_dir}/${baseline_subdir}/baseline_symbols.txt; \ if test -f $${output}; then \ output=$${output}.new; \ t=`echo $${output} | sed 's=.*config/abi/=='`; \ echo "Baseline file already exists, writing to $${t} instead."; \ fi; \ ${extract_symvers} ../src/.libs/libstdc++.so $${output}) %/site.exp: site.exp -@test -d $* || mkdir $* @srcdir=`cd $(srcdir); ${PWD_COMMAND}`; @objdir=`${PWD_COMMAND}`/$*; \ sed -e "s|^set srcdir .*$$|set srcdir $$srcdir|" \ -e "s|^set objdir .*$$|set objdir $$objdir|" \ site.exp > $*/site.exp.tmp @-rm -f $*/site.bak @test ! -f $*/site.exp || mv $*/site.exp $*/site.bak @mv $*/site.exp.tmp $*/site.exp $(check_DEJAGNU_normal_targets): check-DEJAGNUnormal%: normal%/site.exp # Run the testsuite in normal mode. check-DEJAGNU $(check_DEJAGNU_normal_targets): check-DEJAGNU%: site.exp $(if $*,@)AR="$(AR)"; export AR; \ RANLIB="$(RANLIB)"; export RANLIB; \ if [ -z "$*" ] && [ -n "$(filter -j%, $(MFLAGS))" ]; then \ rm -rf normal-parallel || true; \ mkdir normal-parallel; \ $(MAKE) $(AM_MAKEFLAGS) $(check_DEJAGNU_normal_targets); \ rm -rf normal-parallel || true; \ for idx in $(check_p_subdirs); do \ if [ -d normal$$idx ]; then \ mv -f normal$$idx/libstdc++.sum normal$$idx/libstdc++.sum.sep; \ mv -f normal$$idx/libstdc++.log normal$$idx/libstdc++.log.sep; \ fi; \ done; \ $(SHELL) $(srcdir)/../../contrib/dg-extract-results.sh \ normal[0-9]*/libstdc++.sum.sep > libstdc++.sum; \ $(SHELL) $(srcdir)/../../contrib/dg-extract-results.sh -L \ normal[0-9]*/libstdc++.log.sep > libstdc++.log; \ exit 0; \ fi; \ srcdir=`$(am__cd) $(srcdir) && pwd`; export srcdir; \ EXPECT=$(EXPECT); export EXPECT; \ runtest=$(RUNTEST); \ if [ -z "$$runtest" ]; then runtest=runtest; fi; \ tool=libstdc++; \ if [ -n "$*" ]; then \ if [ -f normal-parallel/finished ]; then rm -rf "$*"; exit 0; fi; \ GCC_RUNTEST_PARALLELIZE_DIR=`${PWD_COMMAND}`/normal-parallel; \ export GCC_RUNTEST_PARALLELIZE_DIR; \ cd "$*"; \ fi; \ if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \ $$runtest $(AM_RUNTESTFLAGS) $(RUNTESTDEFAULTFLAGS) \ $(RUNTESTFLAGS); \ if [ -n "$*" ]; then \ touch $$GCC_RUNTEST_PARALLELIZE_DIR/finished; \ fi; \ else \ echo "WARNING: could not find \`runtest'" 1>&2; :;\ fi check-am: $(MAKE) $(AM_MAKEFLAGS) check-DEJAGNU .PHONY: check-DEJAGNU # Use 'new-abi-baseline' to create an initial symbol file. Then run # 'check-abi' to test for changes against that file. check-abi: site.exp baseline_symbols -@runtest $(AM_RUNTESTFLAGS) --tool libstdc++ $(RUNTESTFLAGS) abi.exp check-compile: testsuite_files ${compile_script} -@(chmod + ${compile_script}; \ ${compile_script} ${glibcxx_srcdir} ${glibcxx_builddir}) check-performance: testsuite_files_performance ${performance_script} -@(chmod + ${check_performance_script}; \ ${check_performance_script} ${glibcxx_srcdir} ${glibcxx_builddir}) check-debug: site.exp outputdir=debug; export outputdir; \ if test ! -d $${outputdir}; then \ mkdir $${outputdir}; \ fi; \ srcdir=`$(am__cd) $(srcdir) && pwd`; export srcdir; \ EXPECT=$(EXPECT); export EXPECT; \ $(MAKE) RUNTESTFLAGS="$(RUNTESTFLAGS) conformance.exp --outdir $${outputdir} --objdir $${outputdir} --target_board=$(debug_flags)" check-DEJAGNU; check-parallel: site.exp -@(if test ! -d $${libgomp_dir}; then \ echo "Testing parallel mode failed as libgomp not present."; \ exit 1; \ fi; \ outputdir=parallel; export outputdir; \ if test ! -d $${outputdir}; then \ mkdir $${outputdir}; \ fi; \ srcdir=`$(am__cd) $(srcdir) && pwd`; export srcdir; \ EXPECT=$(EXPECT); export EXPECT; \ $(MAKE) CXXFLAGS="$(atomic_flags) $(libgomp_flags)" RUNTESTFLAGS="$(RUNTESTFLAGS) conformance.exp --outdir $${outputdir} --objdir $${outputdir} --target_board=$(parallel_flags)" check-DEJAGNU; ) check-performance-parallel: testsuite_files_performance ${performance_script} -@(chmod + ${check_performance_script}; \ CXXFLAGS="-D_GLIBCXX_PARALLEL -fopenmp $(atomic_flags) $(libgomp_flags)"; export CXXFLAGS; \ ${check_performance_script} ${glibcxx_srcdir} ${glibcxx_builddir}) check-profile: site.exp -@(outputdir=profile; export outputdir; \ if test ! -d $${outputdir}; then \ mkdir $${outputdir}; \ fi; \ srcdir=`$(am__cd) $(srcdir) && pwd`; export srcdir; \ EXPECT=$(EXPECT); export EXPECT; \ $(MAKE) CXXFLAGS="$(atomic_flags) " RUNTESTFLAGS="$(RUNTESTFLAGS) conformance.exp --outdir $${outputdir} --objdir $${outputdir} --target_board=$(profile_flags)" check-DEJAGNU; ) .PHONY: baseline_symbols new-abi-baseline \ check-abi check-compile check-performance check-parallel check-profile # To remove directories. clean-local: rm -rf de fr debug parallel profile binaries normal* # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: