/* Top level of GNU C compiler Copyright (C) 1987, 88, 89, 92-7, 1998 Free Software Foundation, Inc. This file is part of GNU CC. GNU CC is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. GNU CC is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GNU CC; see the file COPYING. If not, write to the Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* This is the top level of cc1/c++. It parses command args, opens files, invokes the various passes in the proper order, and counts the time used by each. Error messages and low-level interface to malloc also handled here. */ #include "config.h" #undef FLOAT /* This is for hpux. They should change hpux. */ #undef FFS /* Some systems define this in param.h. */ #include "system.h" #include #include #include #ifdef HAVE_SYS_RESOURCE_H # include #endif #ifdef HAVE_SYS_TIMES_H # include #endif #include "input.h" #include "tree.h" #include "rtl.h" #include "flags.h" #include "insn-attr.h" #include "insn-codes.h" #include "insn-config.h" #include "recog.h" #include "defaults.h" #include "output.h" #include "except.h" #include "toplev.h" #include "expr.h" #ifdef DWARF_DEBUGGING_INFO #include "dwarfout.h" #endif #if defined (DWARF2_UNWIND_INFO) || defined (DWARF2_DEBUGGING_INFO) #include "dwarf2out.h" #endif #if defined(DBX_DEBUGGING_INFO) || defined(XCOFF_DEBUGGING_INFO) #include "dbxout.h" #endif #ifdef SDB_DEBUGGING_INFO #include "sdbout.h" #endif #ifdef XCOFF_DEBUGGING_INFO #include "xcoffout.h" #endif #ifdef VMS /* The extra parameters substantially improve the I/O performance. */ static FILE * vms_fopen (fname, type) char * fname; char * type; { /* The in the gcc-vms-1.42 distribution prototypes fopen with two fixed arguments, which matches ANSI's specification but not VAXCRTL's pre-ANSI implementation. This hack circumvents the mismatch problem. */ FILE *(*vmslib_fopen)() = (FILE *(*)()) fopen; if (*type == 'w') return (*vmslib_fopen) (fname, type, "mbc=32", "deq=64", "fop=tef", "shr=nil"); else return (*vmslib_fopen) (fname, type, "mbc=32"); } #define fopen vms_fopen #endif /* VMS */ #ifndef DEFAULT_GDB_EXTENSIONS #define DEFAULT_GDB_EXTENSIONS 1 #endif /* If more than one debugging type is supported, you must define PREFERRED_DEBUGGING_TYPE to choose a format in a system-dependent way. This is one long line cause VAXC can't handle a \-newline. */ #if 1 < (defined (DBX_DEBUGGING_INFO) + defined (SDB_DEBUGGING_INFO) + defined (DWARF_DEBUGGING_INFO) + defined (DWARF2_DEBUGGING_INFO) + defined (XCOFF_DEBUGGING_INFO)) #ifndef PREFERRED_DEBUGGING_TYPE You Lose! You must define PREFERRED_DEBUGGING_TYPE! #endif /* no PREFERRED_DEBUGGING_TYPE */ #else /* Only one debugging format supported. Define PREFERRED_DEBUGGING_TYPE so the following code needn't care. */ #ifdef DBX_DEBUGGING_INFO #define PREFERRED_DEBUGGING_TYPE DBX_DEBUG #endif #ifdef SDB_DEBUGGING_INFO #define PREFERRED_DEBUGGING_TYPE SDB_DEBUG #endif #ifdef DWARF_DEBUGGING_INFO #define PREFERRED_DEBUGGING_TYPE DWARF_DEBUG #endif #ifdef DWARF2_DEBUGGING_INFO #define PREFERRED_DEBUGGING_TYPE DWARF2_DEBUG #endif #ifdef XCOFF_DEBUGGING_INFO #define PREFERRED_DEBUGGING_TYPE XCOFF_DEBUG #endif #endif /* More than one debugger format enabled. */ /* If still not defined, must have been because no debugging formats are supported. */ #ifndef PREFERRED_DEBUGGING_TYPE #define PREFERRED_DEBUGGING_TYPE NO_DEBUG #endif extern int rtx_equal_function_value_matters; #if ! (defined (VMS) || defined (OS2)) extern char **environ; #endif extern char *version_string, *language_string; /* Carry information from ASM_DECLARE_OBJECT_NAME to ASM_FINISH_DECLARE_OBJECT. */ extern int size_directive_output; extern tree last_assemble_variable_decl; extern char *init_parse PVPROTO((char *)); extern void finish_parse (); extern void init_decl_processing (); extern void init_obstacks (); extern void init_tree_codes (); extern void init_rtl (); extern void init_regs (); extern void init_optabs (); extern void init_stmt (); extern void init_reg_sets (); extern void dump_flow_info (); extern void dump_sched_info (); extern void dump_local_alloc (); extern void regset_release_memory (); extern void print_rtl (); extern void print_rtl_with_bb (); void rest_of_decl_compilation (); void error_with_file_and_line PVPROTO((char *file, int line, char *s, ...)); void error_with_decl PVPROTO((tree decl, char *s, ...)); void error PVPROTO((char *s, ...)); void fatal PVPROTO((char *s, ...)); void warning_with_file_and_line PVPROTO((char *file, int line, char *s, ...)); void warning_with_decl PVPROTO((tree decl, char *s, ...)); void warning PVPROTO((char *s, ...)); void pedwarn PVPROTO((char *s, ...)); void pedwarn_with_decl PVPROTO((tree decl, char *s, ...)); void pedwarn_with_file_and_line PVPROTO((char *file, int line, char *s, ...)); void sorry PVPROTO((char *s, ...)); static void set_target_switch PROTO((char *)); static char *decl_name PROTO((tree, int)); static void vmessage PROTO((char *, char *, va_list)); static void v_message_with_file_and_line PROTO((char *, int, char *, char *, va_list)); static void v_message_with_decl PROTO((tree, char *, char *, va_list)); static void file_and_line_for_asm PROTO((rtx, char **, int *)); static void v_error_with_file_and_line PROTO((char *, int, char *, va_list)); static void v_error_with_decl PROTO((tree, char *, va_list)); static void v_error_for_asm PROTO((rtx, char *, va_list)); static void verror PROTO((char *, va_list)); static void vfatal PROTO((char *, va_list)) ATTRIBUTE_NORETURN; static void v_warning_with_file_and_line PROTO ((char *, int, char *, va_list)); static void v_warning_with_decl PROTO((tree, char *, va_list)); static void v_warning_for_asm PROTO((rtx, char *, va_list)); static void vwarning PROTO((char *, va_list)); static void vpedwarn PROTO((char *, va_list)); static void v_pedwarn_with_decl PROTO((tree, char *, va_list)); static void v_pedwarn_with_file_and_line PROTO((char *, int, char *, va_list)); static void vsorry PROTO((char *, va_list)); static void v_really_sorry PROTO((char *, va_list)) ATTRIBUTE_NORETURN; static void float_signal PROTO((int)); static void pipe_closed PROTO((int)); static void output_lang_identify PROTO((FILE *)); static void open_dump_file PROTO((char *, char *)); static void close_dump_file PROTO((void (*) (FILE *, rtx), rtx)); static void dump_rtl PROTO((char *, tree, void (*) (FILE *, rtx), rtx)); static void clean_dump_file PROTO((char *)); static void compile_file PROTO((char *)); static void display_help PROTO ((void)); static void print_version PROTO((FILE *, char *)); static int print_single_switch PROTO((FILE *, int, int, char *, char *, char *, char *, char *)); static void print_switch_values PROTO((FILE *, int, int, char *, char *, char *)); /* Length of line when printing switch values. */ #define MAX_LINE 75 /* Name of program invoked, sans directories. */ char *progname; /* Copy of arguments to main. */ int save_argc; char **save_argv; /* Name of current original source file (what was input to cpp). This comes from each #-command in the actual input. */ char *input_filename; /* Name of top-level original source file (what was input to cpp). This comes from the #-command at the beginning of the actual input. If there isn't any there, then this is the cc1 input file name. */ char *main_input_filename; /* Current line number in real source file. */ int lineno; /* Stack of currently pending input files. */ struct file_stack *input_file_stack; /* Incremented on each change to input_file_stack. */ int input_file_stack_tick; /* FUNCTION_DECL for function now being parsed or compiled. */ extern tree current_function_decl; /* Name to use as base of names for dump output files. */ char *dump_base_name; /* Bit flags that specify the machine subtype we are compiling for. Bits are tested using macros TARGET_... defined in the tm.h file and set by `-m...' switches. Must be defined in rtlanal.c. */ extern int target_flags; /* Flags saying which kinds of debugging dump have been requested. */ int rtl_dump = 0; int rtl_dump_and_exit = 0; int jump_opt_dump = 0; int addressof_dump = 0; int cse_dump = 0; int gcse_dump = 0; int loop_dump = 0; int cse2_dump = 0; int branch_prob_dump = 0; int flow_dump = 0; int combine_dump = 0; int regmove_dump = 0; int sched_dump = 0; int local_reg_dump = 0; int global_reg_dump = 0; int sched2_dump = 0; int jump2_opt_dump = 0; #ifdef DELAY_SLOTS int dbr_sched_dump = 0; #endif int flag_print_asm_name = 0; #ifdef STACK_REGS int stack_reg_dump = 0; #endif #ifdef MACHINE_DEPENDENT_REORG int mach_dep_reorg_dump = 0; #endif /* Name for output file of assembly code, specified with -o. */ char *asm_file_name; /* Value of the -G xx switch, and whether it was passed or not. */ int g_switch_value; int g_switch_set; /* Type(s) of debugging information we are producing (if any). See flags.h for the definitions of the different possible types of debugging information. */ enum debug_info_type write_symbols = NO_DEBUG; /* Level of debugging information we are producing. See flags.h for the definitions of the different possible levels. */ enum debug_info_level debug_info_level = DINFO_LEVEL_NONE; /* Nonzero means use GNU-only extensions in the generated symbolic debugging information. */ /* Currently, this only has an effect when write_symbols is set to DBX_DEBUG, XCOFF_DEBUG, or DWARF_DEBUG. */ int use_gnu_debug_info_extensions = 0; /* Nonzero means do optimizations. -O. Particular numeric values stand for particular amounts of optimization; thus, -O2 stores 2 here. However, the optimizations beyond the basic ones are not controlled directly by this variable. Instead, they are controlled by individual `flag_...' variables that are defaulted based on this variable. */ int optimize = 0; /* Nonzero means optimize for size. -Os. The only valid values are zero and non-zero. When optimize_size is non-zero, optimize defaults to 2, but certain individual code bloating optimizations are disabled. */ int optimize_size = 0; /* Number of error messages and warning messages so far. */ int errorcount = 0; int warningcount = 0; int sorrycount = 0; /* Pointer to function to compute the name to use to print a declaration. DECL is the declaration in question. VERBOSITY determines what information will be printed: 0: DECL_NAME, demangled as necessary. 1: and scope information. 2: and any other information that might be interesting, such as function parameter types in C++. */ char *(*decl_printable_name) PROTO ((tree, int)); /* Pointer to function to compute rtl for a language-specific tree code. */ typedef rtx (*lang_expand_expr_t) PROTO ((union tree_node *, rtx, enum machine_mode, enum expand_modifier modifier)); lang_expand_expr_t lang_expand_expr = 0; /* Pointer to function to finish handling an incomplete decl at the end of compilation. */ void (*incomplete_decl_finalize_hook) PROTO((tree)) = 0; /* Highest label number used at the end of reload. */ int max_label_num_after_reload; /* Nonzero if generating code to do profiling. */ int profile_flag = 0; /* Nonzero if generating code to do profiling on a line-by-line basis. */ int profile_block_flag; /* Nonzero if generating code to profile program flow graph arcs. */ int profile_arc_flag = 0; /* Nonzero if generating info for gcov to calculate line test coverage. */ int flag_test_coverage = 0; /* Nonzero indicates that branch taken probabilities should be calculated. */ int flag_branch_probabilities = 0; /* Nonzero for -pedantic switch: warn about anything that standard spec forbids. */ int pedantic = 0; /* Temporarily suppress certain warnings. This is set while reading code from a system header file. */ int in_system_header = 0; /* Nonzero means do stupid register allocation. Currently, this is 1 if `optimize' is 0. */ int obey_regdecls = 0; /* Don't print functions as they are compiled and don't print times taken by the various passes. -quiet. */ int quiet_flag = 0; /* -f flags. */ /* Nonzero means `char' should be signed. */ int flag_signed_char; /* Nonzero means give an enum type only as many bytes as it needs. */ int flag_short_enums; /* Nonzero for -fcaller-saves: allocate values in regs that need to be saved across function calls, if that produces overall better code. Optional now, so people can test it. */ #ifdef DEFAULT_CALLER_SAVES int flag_caller_saves = 1; #else int flag_caller_saves = 0; #endif /* Nonzero if structures and unions should be returned in memory. This should only be defined if compatibility with another compiler or with an ABI is needed, because it results in slower code. */ #ifndef DEFAULT_PCC_STRUCT_RETURN #define DEFAULT_PCC_STRUCT_RETURN 1 #endif /* Nonzero for -fpcc-struct-return: return values the same way PCC does. */ int flag_pcc_struct_return = DEFAULT_PCC_STRUCT_RETURN; /* Nonzero for -fforce-mem: load memory value into a register before arithmetic on it. This makes better cse but slower compilation. */ int flag_force_mem = 0; /* Nonzero for -fforce-addr: load memory address into a register before reference to memory. This makes better cse but slower compilation. */ int flag_force_addr = 0; /* Nonzero for -fdefer-pop: don't pop args after each function call; instead save them up to pop many calls' args with one insns. */ int flag_defer_pop = 0; /* Nonzero for -ffloat-store: don't allocate floats and doubles in extended-precision registers. */ int flag_float_store = 0; /* Nonzero for -fcse-follow-jumps: have cse follow jumps to do a more extensive job. */ int flag_cse_follow_jumps; /* Nonzero for -fcse-skip-blocks: have cse follow a branch around a block. */ int flag_cse_skip_blocks; /* Nonzero for -fexpensive-optimizations: perform miscellaneous relatively-expensive optimizations. */ int flag_expensive_optimizations; /* Nonzero for -fthread-jumps: have jump optimize output of loop. */ int flag_thread_jumps; /* Nonzero enables strength-reduction in loop.c. */ int flag_strength_reduce = 0; /* Nonzero enables loop unrolling in unroll.c. Only loops for which the number of iterations can be calculated at compile-time (UNROLL_COMPLETELY, UNROLL_MODULO) or at run-time (preconditioned to be UNROLL_MODULO) are unrolled. */ int flag_unroll_loops; /* Nonzero enables loop unrolling in unroll.c. All loops are unrolled. This is generally not a win. */ int flag_unroll_all_loops; /* Nonzero forces all invariant computations in loops to be moved outside the loop. */ int flag_move_all_movables = 0; /* Nonzero forces all general induction variables in loops to be strength reduced. */ int flag_reduce_all_givs = 0; /* Nonzero to perform full register move optimization passes. This is the default for -O2. */ int flag_regmove = 0; /* Nonzero for -fwritable-strings: store string constants in data segment and don't uniquize them. */ int flag_writable_strings = 0; /* Nonzero means don't put addresses of constant functions in registers. Used for compiling the Unix kernel, where strange substitutions are done on the assembly output. */ int flag_no_function_cse = 0; /* Nonzero for -fomit-frame-pointer: don't make a frame pointer in simple functions that don't require one. */ int flag_omit_frame_pointer = 0; /* Nonzero means place each function into its own section on those platforms which support arbitrary section names and unlimited numbers of sections. */ int flag_function_sections = 0; /* Nonzero to inhibit use of define_optimization peephole opts. */ int flag_no_peephole = 0; /* Nonzero allows GCC to violate some IEEE or ANSI rules regarding math operations in the interest of optimization. For example it allows GCC to assume arguments to sqrt are nonnegative numbers, allowing faster code for sqrt to be generated. */ int flag_fast_math = 0; /* Nonzero means all references through pointers are volatile. */ int flag_volatile; /* Nonzero means treat all global and extern variables as global. */ int flag_volatile_global; /* Nonzero means just do syntax checking; don't output anything. */ int flag_syntax_only = 0; /* Nonzero means perform global cse. */ static int flag_gcse; /* Nonzero means to rerun cse after loop optimization. This increases compilation time about 20% and picks up a few more common expressions. */ static int flag_rerun_cse_after_loop; /* Nonzero means to run loop optimizations twice. */ int flag_rerun_loop_opt; /* Nonzero for -finline-functions: ok to inline functions that look like good inline candidates. */ int flag_inline_functions; /* Nonzero for -fkeep-inline-functions: even if we make a function go inline everywhere, keep its definition around for debugging purposes. */ int flag_keep_inline_functions; /* Nonzero means that functions will not be inlined. */ int flag_no_inline; /* Nonzero means that we should emit static const variables regardless of whether or not optimization is turned on. */ int flag_keep_static_consts = 1; /* Nonzero means we should be saving declaration info into a .X file. */ int flag_gen_aux_info = 0; /* Specified name of aux-info file. */ static char *aux_info_file_name; /* Nonzero means make the text shared if supported. */ int flag_shared_data; /* Nonzero means schedule into delayed branch slots if supported. */ int flag_delayed_branch; /* Nonzero if we are compiling pure (sharable) code. Value is 1 if we are doing reasonable (i.e. simple offset into offset table) pic. Value is 2 if we can only perform register offsets. */ int flag_pic; /* Nonzero means generate extra code for exception handling and enable exception handling. */ int flag_exceptions; /* Nonzero means use the new model for exception handling. Replaces -DNEW_EH_MODEL as a compile option. */ int flag_new_exceptions = 0; /* Nonzero means don't place uninitialized global data in common storage by default. */ int flag_no_common; /* Nonzero means pretend it is OK to examine bits of target floats, even if that isn't true. The resulting code will have incorrect constants, but the same series of instructions that the native compiler would make. */ int flag_pretend_float; /* Nonzero means change certain warnings into errors. Usually these are warnings about failure to conform to some standard. */ int flag_pedantic_errors = 0; /* flag_schedule_insns means schedule insns within basic blocks (before local_alloc). flag_schedule_insns_after_reload means schedule insns after global_alloc. */ int flag_schedule_insns = 0; int flag_schedule_insns_after_reload = 0; #ifdef HAIFA /* The following flags have effect only for scheduling before register allocation: flag_schedule_interblock means schedule insns accross basic blocks. flag_schedule_speculative means allow speculative motion of non-load insns. flag_schedule_speculative_load means allow speculative motion of some load insns. flag_schedule_speculative_load_dangerous allows speculative motion of more load insns. */ int flag_schedule_interblock = 1; int flag_schedule_speculative = 1; int flag_schedule_speculative_load = 0; int flag_schedule_speculative_load_dangerous = 0; /* flag_on_branch_count_reg means try to replace add-1,compare,branch tupple by a cheaper branch, on a count register. */ int flag_branch_on_count_reg; #endif /* HAIFA */ /* -finhibit-size-directive inhibits output of .size for ELF. This is used only for compiling crtstuff.c, and it may be extended to other effects needed for crtstuff.c on other systems. */ int flag_inhibit_size_directive = 0; /* -fverbose-asm causes extra commentary information to be produced in the generated assembly code (to make it more readable). This option is generally only of use to those who actually need to read the generated assembly code (perhaps while debugging the compiler itself). -fno-verbose-asm, the default, causes the extra information to be omitted and is useful when comparing two assembler files. */ int flag_verbose_asm = 0; /* -dA causes debug commentary information to be produced in the generated assembly code (to make it more readable). This option is generally only of use to those who actually need to read the generated assembly code (perhaps while debugging the compiler itself). Currently, this switch is only used by dwarfout.c; however, it is intended to be a catchall for printing debug information in the assembler file. */ int flag_debug_asm = 0; /* -fgnu-linker specifies use of the GNU linker for initializations. (Or, more generally, a linker that handles initializations.) -fno-gnu-linker says that collect2 will be used. */ #ifdef USE_COLLECT2 int flag_gnu_linker = 0; #else int flag_gnu_linker = 1; #endif /* Tag all structures with __attribute__(packed) */ int flag_pack_struct = 0; /* Emit code to check for stack overflow; also may cause large objects to be allocated dynamically. */ int flag_stack_check; /* -fcheck-memory-usage causes extra code to be generated in order to check memory accesses. This is used by a detector of bad memory accesses such as Checker. */ int flag_check_memory_usage = 0; /* -fprefix-function-name causes function name to be prefixed. This can be used with -fcheck-memory-usage to isolate code compiled with -fcheck-memory-usage. */ int flag_prefix_function_name = 0; /* 0 if pointer arguments may alias each other. True in C. 1 if pointer arguments may not alias each other but may alias global variables. 2 if pointer arguments may not alias each other and may not alias global variables. True in Fortran. This defaults to 0 for C. */ int flag_argument_noalias = 0; /* Nonzero if we should do (language-dependent) alias analysis. Typically, this analysis will assume that expressions of certain types do not alias expressions of certain other types. Only used if alias analysis (in general) is enabled. */ int flag_strict_aliasing = 0; extern int flag_dump_unnumbered; /* Instrument functions with calls at entry and exit, for profiling. */ int flag_instrument_function_entry_exit = 0; /* Table of supported debugging formats. */ static struct { char * arg; /* Since PREFERRED_DEBUGGING_TYPE isn't necessarily a constant expression, we use NO_DEBUG in its place. */ enum debug_info_type debug_type; int use_extensions_p; char * description; } *da, debug_args[] = { { "g", NO_DEBUG, DEFAULT_GDB_EXTENSIONS, "Generate default debug format output" }, { "ggdb", NO_DEBUG, 1, "Generate default extended debug format output" }, #ifdef DBX_DEBUGGING_INFO { "gstabs", DBX_DEBUG, 0, "Generate STABS format debug output" }, { "gstabs+", DBX_DEBUG, 1, "Generate extended STABS format debug output" }, #endif #ifdef DWARF_DEBUGGING_INFO { "gdwarf", DWARF_DEBUG, 0, "Generate DWARF-1 format debug output"}, { "gdwarf+", DWARF_DEBUG, 1, "Generated extended DWARF-1 format debug output" }, #endif #ifdef DWARF2_DEBUGGING_INFO { "gdwarf-2", DWARF2_DEBUG, 0, "Enable DWARF-2 debug output" }, #endif #ifdef XCOFF_DEBUGGING_INFO { "gxcoff", XCOFF_DEBUG, 0, "Generate XCOFF format debug output" }, { "gxcoff+", XCOFF_DEBUG, 1, "Generate extended XCOFF format debug output" }, #endif #ifdef SDB_DEBUGGING_INFO { "gcoff", SDB_DEBUG, 0, "Generate COFF format debug output" }, #endif { 0, 0, 0 } }; typedef struct { char * string; int * variable; int on_value; char * description; } lang_independent_options; /* Table of language-independent -f options. STRING is the option name. VARIABLE is the address of the variable. ON_VALUE is the value to store in VARIABLE if `-fSTRING' is seen as an option. (If `-fno-STRING' is seen as an option, the opposite value is stored.) */ lang_independent_options f_options[] = { {"float-store", &flag_float_store, 1, "Do not store floats in registers" }, {"volatile", &flag_volatile, 1, "Consider all mem refs through pointers as volatile"}, {"volatile-global", &flag_volatile_global, 1, "Consider all mem refs to global data to be volatile" }, {"defer-pop", &flag_defer_pop, 1, "Defer popping functions args from stack until later" }, {"omit-frame-pointer", &flag_omit_frame_pointer, 1, "When possible do not generate stack frames"}, {"cse-follow-jumps", &flag_cse_follow_jumps, 1, "When running CSE, follow jumps to their targets" }, {"cse-skip-blocks", &flag_cse_skip_blocks, 1, "When running CSE, follow conditional jumps" }, {"expensive-optimizations", &flag_expensive_optimizations, 1, "Perform a number of minor, expensive optimisations" }, {"thread-jumps", &flag_thread_jumps, 1, "Perform jump threading optimisations"}, {"strength-reduce", &flag_strength_reduce, 1, "Perform strength reduction optimisations" }, {"unroll-loops", &flag_unroll_loops, 1, "Perform loop unrolling when interation count is known" }, {"unroll-all-loops", &flag_unroll_all_loops, 1, "Perofm loop onrolling for all loops" }, {"move-all-movables", &flag_move_all_movables, 1, "Force all loop invariant computations out of loops" }, {"reduce-all-givs", &flag_reduce_all_givs, 1, "Strength reduce all loop general induction variables" }, {"writable-strings", &flag_writable_strings, 1, "Store strings in writable data section" }, {"peephole", &flag_no_peephole, 0, "Enable machine specific peephole optimisations" }, {"force-mem", &flag_force_mem, 1, "Copy memory operands into registers before using" }, {"force-addr", &flag_force_addr, 1, "Copy memory address constants into regs before using" }, {"function-cse", &flag_no_function_cse, 0, "Allow function addresses to be held in registers" }, {"inline-functions", &flag_inline_functions, 1, "Integrate simple functions into their callers" }, {"keep-inline-functions", &flag_keep_inline_functions, 1, "Generate code for funcs even if they are fully inlined" }, {"inline", &flag_no_inline, 0, "Pay attention to the 'inline' keyword"}, {"keep-static-consts", &flag_keep_static_consts, 1, "Emit static const variables even if they are not used" }, {"syntax-only", &flag_syntax_only, 1, "Check for syntax errors, then stop" }, {"shared-data", &flag_shared_data, 1, "Mark data as shared rather than private" }, {"caller-saves", &flag_caller_saves, 1, "Enable saving registers around function calls" }, {"pcc-struct-return", &flag_pcc_struct_return, 1, "Return 'short' aggregates in memory, not registers" }, {"reg-struct-return", &flag_pcc_struct_return, 0, "Return 'short' aggregates in registers" }, {"delayed-branch", &flag_delayed_branch, 1, "Attempt to fill delay slots of branch instructions" }, {"gcse", &flag_gcse, 1, "Perform the global common subexpression elimination" }, {"rerun-cse-after-loop", &flag_rerun_cse_after_loop, 1, "Run CSE pass after loop optimisations"}, {"rerun-loop-opt", &flag_rerun_loop_opt, 1, "Run the loop optimiser twice"}, {"pretend-float", &flag_pretend_float, 1, "Pretend that host and target use the same FP format"}, {"schedule-insns", &flag_schedule_insns, 1, "Reschedule instructions to avoid pipeline stalls"}, {"schedule-insns2", &flag_schedule_insns_after_reload, 1, "Run two passes of the instruction scheduler"}, #ifdef HAIFA {"sched-interblock",&flag_schedule_interblock, 1, "Enable scheduling across basic blocks" }, {"sched-spec",&flag_schedule_speculative, 1, "Allow speculative motion of non-loads" }, {"sched-spec-load",&flag_schedule_speculative_load, 1, "Allow speculative motion of some loads" }, {"sched-spec-load-dangerous",&flag_schedule_speculative_load_dangerous, 1, "Allow speculative motion of more loads" }, {"branch-count-reg",&flag_branch_on_count_reg, 1, "Replace add,compare,branch with branch on count reg"}, #endif /* HAIFA */ {"pic", &flag_pic, 1, "Generate position independent code, if possible"}, {"PIC", &flag_pic, 2, ""}, {"exceptions", &flag_exceptions, 1, "Enable exception handling" }, {"new-exceptions", &flag_new_exceptions, 1, "Use the new model for exception handling" }, {"sjlj-exceptions", &exceptions_via_longjmp, 1, "Use setjmp/longjmp to handle exceptions" }, {"asynchronous-exceptions", &asynchronous_exceptions, 1, "Support asynchronous exceptions" }, {"profile-arcs", &profile_arc_flag, 1, "Insert arc based program profiling code" }, {"test-coverage", &flag_test_coverage, 1, "Create data files needed by gcov" }, {"branch-probabilities", &flag_branch_probabilities, 1, "Use profiling information for branch porbabilities" }, {"fast-math", &flag_fast_math, 1, "Improve FP speed by violating ANSI & IEEE rules" }, {"common", &flag_no_common, 0, "Do not put unitialised globals in the common section" }, {"inhibit-size-directive", &flag_inhibit_size_directive, 1, "Do not generate .size directives" }, {"function-sections", &flag_function_sections, 1, "place each function into its own section" }, {"verbose-asm", &flag_verbose_asm, 1, "Add extra commentry to assembler output"}, {"gnu-linker", &flag_gnu_linker, 1, "Output GNU ld formatted global initialisers"}, {"regmove", &flag_regmove, 1, "Enables a regoster move optimisation"}, {"optimize-register-move", &flag_regmove, 1}, {"pack-struct", &flag_pack_struct, 1, "Pack structure members together without holes" }, {"stack-check", &flag_stack_check, 1, "Insert stack checking code into the program" }, {"argument-alias", &flag_argument_noalias, 0, "Specify that arguments may alias each other & globals"}, {"argument-noalias", &flag_argument_noalias, 1, "Assume arguments may alias globals but not each other"}, {"argument-noalias-global", &flag_argument_noalias, 2, "Assume arguments do not alias each other or globals" }, {"strict-aliasing", &flag_strict_aliasing, 1, "Assume strict aliasing rules apply" }, {"check-memory-usage", &flag_check_memory_usage, 1, "Generate code to check every memory access" }, {"prefix-function-name", &flag_prefix_function_name, 1, "Add a prefix to all function names" }, {"dump-unnumbered", &flag_dump_unnumbered, 1}, {"instrument-functions", &flag_instrument_function_entry_exit, 1, "Instrument function entry/exit with profiling calls"}, }; #define NUM_ELEM(a) (sizeof (a) / sizeof ((a)[0])) /* Table of language-specific options. */ static struct lang_opt { char * option; char * description; } documented_lang_options[] = { /* In order not to overload the --help output, the convention used here is to only describe those options which are not enabled by default. */ { "-ansi", "Compile just for ANSI C" }, { "-fallow-single-precision", "Do not promote floats to double if using -traditional" }, { "-fsigned-bitfields", "" }, { "-funsigned-bitfields","Make bitfields by unsigned by default" }, { "-fno-signed-bitfields", "" }, { "-fno-unsigned-bitfields","" }, { "-fsigned-char", "Make 'char' be signed by default"}, { "-funsigned-char", "Make 'char' be unsigned by default"}, { "-fno-signed-char", "" }, { "-fno-unsigned-char", "" }, { "-ftraditional", "" }, { "-traditional", "Attempt to support traditional K&R style C"}, { "-fnotraditional", "" }, { "-fno-traditional", "" }, { "-fasm", "" }, { "-fno-asm", "Do not recognise the 'asm' keyword" }, { "-fbuiltin", "" }, { "-fno-builtin", "Do not recognise any built in functions" }, { "-fhosted", "Assume normal C execution environment" }, { "-fno-hosted", "" }, { "-ffreestanding", "Assume that standard libraries & main might not exist" }, { "-fno-freestanding", "" }, { "-fcond-mismatch", "Allow different types as args of ? operator"}, { "-fno-cond-mismatch", "" }, { "-fdollars-in-identifiers", "Allow the use of $ inside indentifiers" }, { "-fno-dollars-in-identifiers", "" }, { "-fident", "" }, { "-fno-ident", "Ignore #ident directives" }, { "-fshort-double", "Use the same size for double as for float" }, { "-fno-short-double", "" }, { "-fshort-enums", "Use the smallest fitting integer to hold enums"}, { "-fno-short-enums", "" }, { "-Wall", "Enable most warning messages" }, { "-Wbad-function-cast", "Warn about casting functions to incompatible types" }, { "-Wno-bad-function-cast", "" }, { "-Wcast-qual", "Warn about casts which discard qualifiers"}, { "-Wno-cast-qual", "" }, { "-Wchar-subscripts", "Warn about subscripts whoes type is 'char'"}, { "-Wno-char-subscripts", "" }, { "-Wcomment", "Warn if nested comments are detected" }, { "-Wno-comment", }, { "-Wcomments", }, { "-Wno-comments", }, { "-Wconversion", "Warn about possibly confusing type conversions" }, { "-Wno-conversion", "" }, { "-Wformat", "Warn about printf format anomalies" }, { "-Wno-format", "" }, { "-Wimplicit-function-declaration", "Warn about implicit function declarations" }, { "-Wno-implicit-function-declaration", "" }, { "-Werror-implicit-function-declaration", "" }, { "-Wimplicit-int", "Warn when a declaration does not specify a type" }, { "-Wno-implicit-int", "" }, { "-Wimplicit", "" }, { "-Wno-implicit", "" }, { "-Wimport", "Warn about the use of the #import directive" }, { "-Wno-import", "" }, { "-Wlong-long","" }, { "-Wno-long-long", "Do not warn about using 'long long' when -pedantic" }, { "-Wmain", "Warn about suspicious declarations of main" }, { "-Wno-main", "" }, { "-Wmissing-braces", "Warn about possibly missing braces around initialisers" }, { "-Wno-missing-braces", "" }, { "-Wmissing-declarations", "Warn about global funcs without previous declarations"}, { "-Wno-missing-declarations", "" }, { "-Wmissing-prototypes", "Warn about global funcs without prototypes" }, { "-Wno-missing-prototypes", "" }, { "-Wmultichar", "Warn about use of multicharacter literals"}, { "-Wno-multichar", "" }, { "-Wnested-externs", "Warn about externs not at file scope level" }, { "-Wno-nested-externs", "" }, { "-Wparentheses", "Warn about possible missing parentheses" }, { "-Wno-parentheses", "" }, { "-Wpointer-arith", "Warn about function pointer arithmetic" }, { "-Wno-pointer-arith", "" }, { "-Wredundant-decls", "Warn about multiple declarations of the same object" }, { "-Wno-redundant-decls", "" }, { "-Wsign-compare", "Warn about signed/unsigned comparisons" }, { "-Wno-sign-compare", "" }, { "-Wunknown-pragmas", "Warn about unrecognised pragmas" }, { "-Wno-unknown-pragmas", "" }, { "-Wstrict-prototypes", "Warn about non-prototyped function decls" }, { "-Wno-strict-prototypes", "" }, { "-Wtraditional", "Warn about constructs whoes meaning change in ANSI C"}, { "-Wno-traditional", "" }, { "-Wtrigraphs", "Warn when trigraphs are encountered" }, { "-Wno-trigraphs", "" }, { "-Wundef", "" }, { "-Wno-undef", "" }, { "-Wwrite-strings", "Mark strings as 'const char *'"}, { "-Wno-write-strings", "" }, /* These are for languages with USE_CPPLIB. */ /* These options are already documented in cpplib.c */ { "--help", "" }, { "-A", "" }, { "-D", "" }, { "-I", "" }, { "-U", "" }, { "-idirafter", "" }, { "-iprefix", "" }, { "-isystem", "" }, { "-lang-c", "" }, { "-lang-c89", "" }, { "-lang-c++", "" }, { "-nostdinc", "" }, { "-nostdinc++", "" }, { "-trigraphs", "" }, { "-undef", "" }, { "-remap", "" }, #define DEFINE_LANG_NAME(NAME) { NULL, NAME }, /* These are for obj c. */ DEFINE_LANG_NAME ("Objective C") { "-lang-objc", "" }, { "-gen-decls", "Dump decls to a .decl file" }, { "-fgnu-runtime", "Generate code for GNU runtime envrionment" }, { "-fno-gnu-runtime", "" }, { "-fnext-runtime", "Generate code for NeXT runtime environment" }, { "-fno-next-runtime", "" }, { "-Wselector", "Warn if a selector has multiple methods" }, { "-Wno-selector", "" }, { "-Wprotocol", "" }, { "-Wno-protocol", "Do not warn if inherited methods are unimplemented"}, { "-print-objc-runtime-info", "Generate C header of platform specific features" }, #include "options.h" }; /* Here is a table, controlled by the tm.h file, listing each -m switch and which bits in `target_switches' it should set or clear. If VALUE is positive, it is bits to set. If VALUE is negative, -VALUE is bits to clear. (The sign bit is not used so there is no confusion.) */ struct { char * name; int value; char * description; } target_switches [] = TARGET_SWITCHES; /* This table is similar, but allows the switch to have a value. */ #ifdef TARGET_OPTIONS struct { char * prefix; char ** variable; char * description; } target_options [] = TARGET_OPTIONS; #endif /* Options controlling warnings */ /* Don't print warning messages. -w. */ int inhibit_warnings = 0; /* Print various extra warnings. -W. */ int extra_warnings = 0; /* Treat warnings as errors. -Werror. */ int warnings_are_errors = 0; /* Nonzero to warn about unused local variables. */ int warn_unused; /* Nonzero to warn about variables used before they are initialized. */ int warn_uninitialized; /* Nonzero means warn about all declarations which shadow others. */ int warn_shadow; /* Warn if a switch on an enum fails to have a case for every enum value. */ int warn_switch; /* Nonzero means warn about function definitions that default the return type or that use a null return and have a return-type other than void. */ int warn_return_type; /* Nonzero means warn about pointer casts that increase the required alignment of the target type (and might therefore lead to a crash due to a misaligned access). */ int warn_cast_align; /* Nonzero means warn about any identifiers that match in the first N characters. The value N is in `id_clash_len'. */ int warn_id_clash; unsigned id_clash_len; /* Nonzero means warn about any objects definitions whose size is larger than N bytes. Also want about function definitions whose returned values are larger than N bytes. The value N is in `larger_than_size'. */ int warn_larger_than; unsigned larger_than_size; /* Nonzero means warn if inline function is too large. */ int warn_inline; /* Warn if a function returns an aggregate, since there are often incompatible calling conventions for doing this. */ int warn_aggregate_return; /* Likewise for -W. */ lang_independent_options W_options[] = { {"unused", &warn_unused, 1, "Warn when a variable is unused" }, {"error", &warnings_are_errors, 1, ""}, {"shadow", &warn_shadow, 1, "Warn when one local variable shadows another" }, {"switch", &warn_switch, 1, "Warn about enumerated switches missing a specific case" }, {"aggregate-return", &warn_aggregate_return, 1, "Warn about returning structures, unions or arrays" }, {"cast-align", &warn_cast_align, 1, "Warn about pointer casts which increase alignment" }, {"uninitialized", &warn_uninitialized, 1, "Warn about unitialized automatic variables"}, {"inline", &warn_inline, 1, "Warn when an inlined function cannot be inlined"} }; /* Output files for assembler code (real compiler output) and debugging dumps. */ FILE *asm_out_file; FILE *aux_info_file; FILE *rtl_dump_file = NULL; /* Time accumulators, to count the total time spent in various passes. */ int parse_time; int varconst_time; int integration_time; int jump_time; int cse_time; int gcse_time; int loop_time; int cse2_time; int branch_prob_time; int flow_time; int combine_time; int regmove_time; int sched_time; int local_alloc_time; int global_alloc_time; int sched2_time; #ifdef DELAY_SLOTS int dbr_sched_time; #endif int shorten_branch_time; int stack_reg_time; int final_time; int symout_time; int dump_time; /* Return time used so far, in microseconds. */ int get_run_time () { if (quiet_flag) return 0; #ifdef __BEOS__ return 0; #else /* not BeOS */ #if defined (_WIN32) && !defined (__CYGWIN32__) if (clock() < 0) return 0; else return (clock() * 1000); #else /* not _WIN32 */ #ifdef _SC_CLK_TCK { static int tick; struct tms tms; if (tick == 0) tick = 1000000 / sysconf(_SC_CLK_TCK); times (&tms); return (tms.tms_utime + tms.tms_stime) * tick; } #else #ifdef USG { struct tms tms; # if HAVE_SYSCONF && defined _SC_CLK_TCK # define TICKS_PER_SECOND sysconf (_SC_CLK_TCK) /* POSIX 1003.1-1996 */ # else # ifdef CLK_TCK # define TICKS_PER_SECOND CLK_TCK /* POSIX 1003.1-1988; obsolescent */ # else # define TICKS_PER_SECOND HZ /* traditional UNIX */ # endif # endif times (&tms); return (tms.tms_utime + tms.tms_stime) * (1000000 / TICKS_PER_SECOND); } #else #ifndef VMS { struct rusage rusage; getrusage (0, &rusage); return (rusage.ru_utime.tv_sec * 1000000 + rusage.ru_utime.tv_usec + rusage.ru_stime.tv_sec * 1000000 + rusage.ru_stime.tv_usec); } #else /* VMS */ { struct { int proc_user_time; int proc_system_time; int child_user_time; int child_system_time; } vms_times; times ((void *) &vms_times); return (vms_times.proc_user_time + vms_times.proc_system_time) * 10000; } #endif /* VMS */ #endif /* USG */ #endif /* _SC_CLK_TCK */ #endif /* _WIN32 */ #endif /* __BEOS__ */ } #define TIMEVAR(VAR, BODY) \ do { int otime = get_run_time (); BODY; VAR += get_run_time () - otime; } while (0) void print_time (str, total) char *str; int total; { fprintf (stderr, "time in %s: %d.%06d\n", str, total / 1000000, total % 1000000); } /* Count an error or warning. Return 1 if the message should be printed. */ int count_error (warningp) int warningp; { if (warningp && inhibit_warnings) return 0; if (warningp && !warnings_are_errors) warningcount++; else { static int warning_message = 0; if (warningp && !warning_message) { fprintf (stderr, "%s: warnings being treated as errors\n", progname); warning_message = 1; } errorcount++; } return 1; } /* Print a fatal error message. NAME is the text. Also include a system error message based on `errno'. */ void pfatal_with_name (name) char *name; { fprintf (stderr, "%s: ", progname); perror (name); exit (FATAL_EXIT_CODE); } void fatal_io_error (name) char *name; { fprintf (stderr, "%s: %s: I/O error\n", progname, name); exit (FATAL_EXIT_CODE); } /* Called to give a better error message for a bad insn rather than just calling abort(). */ void fatal_insn (message, insn) char *message; rtx insn; { error (message); debug_rtx (insn); if (asm_out_file) fflush (asm_out_file); if (aux_info_file) fflush (aux_info_file); if (rtl_dump_file != NULL) fflush (rtl_dump_file); fflush (stdout); fflush (stderr); abort (); } /* Called to give a better error message when we don't have an insn to match what we are looking for or if the insn's constraints aren't satisfied, rather than just calling abort(). */ void fatal_insn_not_found (insn) rtx insn; { if (INSN_CODE (insn) < 0) fatal_insn ("internal error--unrecognizable insn:", insn); else fatal_insn ("internal error--insn does not satisfy its constraints:", insn); } /* This is the default decl_printable_name function. */ static char * decl_name (decl, verbosity) tree decl; int verbosity ATTRIBUTE_UNUSED; { return IDENTIFIER_POINTER (DECL_NAME (decl)); } static int need_error_newline; /* Function of last error message; more generally, function such that if next error message is in it then we don't have to mention the function name. */ static tree last_error_function = NULL; /* Used to detect when input_file_stack has changed since last described. */ static int last_error_tick; /* Called when the start of a function definition is parsed, this function prints on stderr the name of the function. */ void announce_function (decl) tree decl; { if (! quiet_flag) { if (rtl_dump_and_exit) fprintf (stderr, "%s ", IDENTIFIER_POINTER (DECL_NAME (decl))); else fprintf (stderr, " %s", (*decl_printable_name) (decl, 2)); fflush (stderr); need_error_newline = 1; last_error_function = current_function_decl; } } /* The default function to print out name of current function that caused an error. */ void default_print_error_function (file) char *file; { if (last_error_function != current_function_decl) { char *kind = "function"; if (current_function_decl != 0 && TREE_CODE (TREE_TYPE (current_function_decl)) == METHOD_TYPE) kind = "method"; if (file) fprintf (stderr, "%s: ", file); if (current_function_decl == NULL) fprintf (stderr, "At top level:\n"); else { char *name = (*decl_printable_name) (current_function_decl, 2); fprintf (stderr, "In %s `%s':\n", kind, name); } last_error_function = current_function_decl; } } /* Called by report_error_function to print out function name. * Default may be overridden by language front-ends. */ void (*print_error_function) PROTO((char *)) = default_print_error_function; /* Prints out, if necessary, the name of the current function that caused an error. Called from all error and warning functions. */ void report_error_function (file) char *file; { struct file_stack *p; if (need_error_newline) { fprintf (stderr, "\n"); need_error_newline = 0; } (*print_error_function) (file); if (input_file_stack && input_file_stack->next != 0 && input_file_stack_tick != last_error_tick && file == input_filename) { fprintf (stderr, "In file included"); for (p = input_file_stack->next; p; p = p->next) { fprintf (stderr, " from %s:%d", p->name, p->line); if (p->next) fprintf (stderr, ",\n "); } fprintf (stderr, ":\n"); last_error_tick = input_file_stack_tick; } } /* Print a message. */ static void vmessage (prefix, s, ap) char *prefix; char *s; va_list ap; { if (prefix) fprintf (stderr, "%s: ", prefix); vfprintf (stderr, s, ap); } /* Print a message relevant to line LINE of file FILE. */ static void v_message_with_file_and_line (file, line, prefix, s, ap) char *file; int line; char *prefix; char *s; va_list ap; { if (file) fprintf (stderr, "%s:%d: ", file, line); else fprintf (stderr, "%s: ", progname); vmessage (prefix, s, ap); fputc ('\n', stderr); } /* Print a message relevant to the given DECL. */ static void v_message_with_decl (decl, prefix, s, ap) tree decl; char *prefix; char *s; va_list ap; { char *p; fprintf (stderr, "%s:%d: ", DECL_SOURCE_FILE (decl), DECL_SOURCE_LINE (decl)); if (prefix) fprintf (stderr, "%s: ", prefix); /* Do magic to get around lack of varargs support for insertion of arguments into existing list. We know that the decl is first; we ass_u_me that it will be printed with "%s". */ for (p = s; *p; ++p) { if (*p == '%') { if (*(p + 1) == '%') ++p; else break; } } if (p > s) /* Print the left-hand substring. */ { char fmt[sizeof "%.255s"]; long width = p - s; if (width > 255L) width = 255L; /* arbitrary */ sprintf (fmt, "%%.%lds", width); fprintf (stderr, fmt, s); } if (*p == '%') /* Print the name. */ { char *n = (DECL_NAME (decl) ? (*decl_printable_name) (decl, 2) : "((anonymous))"); fputs (n, stderr); while (*p) { ++p; if (ISALPHA (*(p - 1) & 0xFF)) break; } } if (*p) /* Print the rest of the message. */ vmessage ((char *)NULL, p, ap); fputc ('\n', stderr); } /* Figure file and line of the given INSN. */ static void file_and_line_for_asm (insn, pfile, pline) rtx insn; char **pfile; int *pline; { rtx body = PATTERN (insn); rtx asmop; /* Find the (or one of the) ASM_OPERANDS in the insn. */ if (GET_CODE (body) == SET && GET_CODE (SET_SRC (body)) == ASM_OPERANDS) asmop = SET_SRC (body); else if (GET_CODE (body) == ASM_OPERANDS) asmop = body; else if (GET_CODE (body) == PARALLEL && GET_CODE (XVECEXP (body, 0, 0)) == SET) asmop = SET_SRC (XVECEXP (body, 0, 0)); else if (GET_CODE (body) == PARALLEL && GET_CODE (XVECEXP (body, 0, 0)) == ASM_OPERANDS) asmop = XVECEXP (body, 0, 0); else asmop = NULL; if (asmop) { *pfile = ASM_OPERANDS_SOURCE_FILE (asmop); *pline = ASM_OPERANDS_SOURCE_LINE (asmop); } else { *pfile = input_filename; *pline = lineno; } } /* Report an error at line LINE of file FILE. */ static void v_error_with_file_and_line (file, line, s, ap) char *file; int line; char *s; va_list ap; { count_error (0); report_error_function (file); v_message_with_file_and_line (file, line, (char *)NULL, s, ap); } void error_with_file_and_line VPROTO((char *file, int line, char *s, ...)) { #ifndef __STDC__ char *file; int line; char *s; #endif va_list ap; VA_START (ap, s); #ifndef __STDC__ file = va_arg (ap, char *); line = va_arg (ap, int); s = va_arg (ap, char *); #endif v_error_with_file_and_line (file, line, s, ap); va_end (ap); } /* Report an error at the declaration DECL. S is a format string which uses %s to substitute the declaration name; subsequent substitutions are a la printf. */ static void v_error_with_decl (decl, s, ap) tree decl; char *s; va_list ap; { count_error (0); report_error_function (DECL_SOURCE_FILE (decl)); v_message_with_decl (decl, (char *)NULL, s, ap); } void error_with_decl VPROTO((tree decl, char *s, ...)) { #ifndef __STDC__ tree decl; char *s; #endif va_list ap; VA_START (ap, s); #ifndef __STDC__ decl = va_arg (ap, tree); s = va_arg (ap, char *); #endif v_error_with_decl (decl, s, ap); va_end (ap); } /* Report an error at the line number of the insn INSN. This is used only when INSN is an `asm' with operands, and each ASM_OPERANDS records its own source file and line. */ static void v_error_for_asm (insn, s, ap) rtx insn; char *s; va_list ap; { char *file; int line; count_error (0); file_and_line_for_asm (insn, &file, &line); report_error_function (file); v_message_with_file_and_line (file, line, (char *)NULL, s, ap); } void error_for_asm VPROTO((rtx insn, char *s, ...)) { #ifndef __STDC__ rtx insn; char *s; #endif va_list ap; VA_START (ap, s); #ifndef __STDC__ insn = va_arg (ap, rtx); s = va_arg (ap, char *); #endif v_error_for_asm (insn, s, ap); va_end (ap); } /* Report an error at the current line number. */ static void verror (s, ap) char *s; va_list ap; { v_error_with_file_and_line (input_filename, lineno, s, ap); } void error VPROTO((char *s, ...)) { #ifndef __STDC__ char *s; #endif va_list ap; VA_START (ap, s); #ifndef __STDC__ s = va_arg (ap, char *); #endif verror (s, ap); va_end (ap); } /* Report a fatal error at the current line number. */ static void vfatal (s, ap) char *s; va_list ap; { verror (s, ap); exit (FATAL_EXIT_CODE); } void fatal VPROTO((char *s, ...)) { #ifndef __STDC__ char *s; #endif va_list ap; VA_START (ap, s); #ifndef __STDC__ s = va_arg (ap, char *); #endif vfatal (s, ap); va_end (ap); } /* Report a warning at line LINE of file FILE. */ static void v_warning_with_file_and_line (file, line, s, ap) char *file; int line; char *s; va_list ap; { if (count_error (1)) { report_error_function (file); v_message_with_file_and_line (file, line, "warning", s, ap); } } void warning_with_file_and_line VPROTO((char *file, int line, char *s, ...)) { #ifndef __STDC__ char *file; int line; char *s; #endif va_list ap; VA_START (ap, s); #ifndef __STDC__ file = va_arg (ap, char *); line = va_arg (ap, int); s = va_arg (ap, char *); #endif v_warning_with_file_and_line (file, line, s, ap); va_end (ap); } /* Report a warning at the declaration DECL. S is a format string which uses %s to substitute the declaration name; subsequent substitutions are a la printf. */ static void v_warning_with_decl (decl, s, ap) tree decl; char *s; va_list ap; { if (count_error (1)) { report_error_function (DECL_SOURCE_FILE (decl)); v_message_with_decl (decl, "warning", s, ap); } } void warning_with_decl VPROTO((tree decl, char *s, ...)) { #ifndef __STDC__ tree decl; char *s; #endif va_list ap; VA_START (ap, s); #ifndef __STDC__ decl = va_arg (ap, tree); s = va_arg (ap, char *); #endif v_warning_with_decl (decl, s, ap); va_end (ap); } /* Report a warning at the line number of the insn INSN. This is used only when INSN is an `asm' with operands, and each ASM_OPERANDS records its own source file and line. */ static void v_warning_for_asm (insn, s, ap) rtx insn; char *s; va_list ap; { if (count_error (1)) { char *file; int line; file_and_line_for_asm (insn, &file, &line); report_error_function (file); v_message_with_file_and_line (file, line, "warning", s, ap); } } void warning_for_asm VPROTO((rtx insn, char *s, ...)) { #ifndef __STDC__ rtx insn; char *s; #endif va_list ap; VA_START (ap, s); #ifndef __STDC__ insn = va_arg (ap, rtx); s = va_arg (ap, char *); #endif v_warning_for_asm (insn, s, ap); va_end (ap); } /* Report a warning at the current line number. */ static void vwarning (s, ap) char *s; va_list ap; { v_warning_with_file_and_line (input_filename, lineno, s, ap); } void warning VPROTO((char *s, ...)) { #ifndef __STDC__ char *s; #endif va_list ap; VA_START (ap, s); #ifndef __STDC__ s = va_arg (ap, char *); #endif vwarning (s, ap); va_end (ap); } /* These functions issue either warnings or errors depending on -pedantic-errors. */ static void vpedwarn (s, ap) char *s; va_list ap; { if (flag_pedantic_errors) verror (s, ap); else vwarning (s, ap); } void pedwarn VPROTO((char *s, ...)) { #ifndef __STDC__ char *s; #endif va_list ap; VA_START (ap, s); #ifndef __STDC__ s = va_arg (ap, char *); #endif vpedwarn (s, ap); va_end (ap); } static void v_pedwarn_with_decl (decl, s, ap) tree decl; char *s; va_list ap; { /* We don't want -pedantic-errors to cause the compilation to fail from "errors" in system header files. Sometimes fixincludes can't fix what's broken (eg: unsigned char bitfields - fixing it may change the alignment which will cause programs to mysteriously fail because the C library or kernel uses the original layout). There's no point in issuing a warning either, it's just unnecessary noise. */ if (! DECL_IN_SYSTEM_HEADER (decl)) { if (flag_pedantic_errors) v_error_with_decl (decl, s, ap); else v_warning_with_decl (decl, s, ap); } } void pedwarn_with_decl VPROTO((tree decl, char *s, ...)) { #ifndef __STDC__ tree decl; char *s; #endif va_list ap; VA_START (ap, s); #ifndef __STDC__ decl = va_arg (ap, tree); s = va_arg (ap, char *); #endif v_pedwarn_with_decl (decl, s, ap); va_end (ap); } static void v_pedwarn_with_file_and_line (file, line, s, ap) char *file; int line; char *s; va_list ap; { if (flag_pedantic_errors) v_error_with_file_and_line (file, line, s, ap); else v_warning_with_file_and_line (file, line, s, ap); } void pedwarn_with_file_and_line VPROTO((char *file, int line, char *s, ...)) { #ifndef __STDC__ char *file; int line; char *s; #endif va_list ap; VA_START (ap, s); #ifndef __STDC__ file = va_arg (ap, char *); line = va_arg (ap, int); s = va_arg (ap, char *); #endif v_pedwarn_with_file_and_line (file, line, s, ap); va_end (ap); } /* Apologize for not implementing some feature. */ static void vsorry (s, ap) char *s; va_list ap; { sorrycount++; if (input_filename) fprintf (stderr, "%s:%d: ", input_filename, lineno); else fprintf (stderr, "%s: ", progname); vmessage ("sorry, not implemented", s, ap); fputc ('\n', stderr); } void sorry VPROTO((char *s, ...)) { #ifndef __STDC__ char *s; #endif va_list ap; VA_START (ap, s); #ifndef __STDC__ s = va_arg (ap, char *); #endif vsorry (s, ap); va_end (ap); } /* Apologize for not implementing some feature, then quit. */ static void v_really_sorry (s, ap) char *s; va_list ap; { sorrycount++; if (input_filename) fprintf (stderr, "%s:%d: ", input_filename, lineno); else fprintf (stderr, "%s: ", progname); vmessage ("sorry, not implemented", s, ap); fatal (" (fatal)\n"); } void really_sorry VPROTO((char *s, ...)) { #ifndef __STDC__ char *s; #endif va_list ap; VA_START (ap, s); #ifndef __STDC__ s = va_arg (ap, char *); #endif v_really_sorry (s, ap); va_end (ap); } /* More 'friendly' abort that prints the line and file. config.h can #define abort fancy_abort if you like that sort of thing. I don't think this is actually a good idea. Other sorts of crashes will look a certain way. It is a good thing if crashes from calling abort look the same way. -- RMS */ void fancy_abort () { fatal ("internal gcc abort"); } /* This calls abort and is used to avoid problems when abort if a macro. It is used when we need to pass the address of abort. */ void do_abort () { abort (); } /* When `malloc.c' is compiled with `rcheck' defined, it calls this function to report clobberage. */ void botch (s) char * s ATTRIBUTE_UNUSED; { abort (); } /* Same as `malloc' but report error if no memory available. */ char * xmalloc (size) unsigned size; { register char *value; if (size == 0) size = 1; value = (char *) malloc (size); if (value == 0) fatal ("virtual memory exhausted"); return value; } /* Same as `calloc' but report error if no memory available. */ char * xcalloc (size1, size2) unsigned size1, size2; { register char *value; if (size1 == 0 || size2 == 0) size1 = size2 = 1; value = (char *) calloc (size1, size2); if (value == 0) fatal ("virtual memory exhausted"); return value; } /* Same as `realloc' but report error if no memory available. Also handle null PTR even if the vendor realloc gets it wrong. */ char * xrealloc (ptr, size) char *ptr; int size; { char *result; if (size == 0) size = 1; result = (ptr ? (char *) realloc (ptr, size) : (char *) malloc (size)); if (!result) fatal ("virtual memory exhausted"); return result; } /* Same as `strdup' but report error if no memory available. */ char * xstrdup (s) register char *s; { register char *result = (char *) malloc (strlen (s) + 1); if (! result) fatal ("virtual memory exhausted"); strcpy (result, s); return result; } /* Return the logarithm of X, base 2, considering X unsigned, if X is a power of 2. Otherwise, returns -1. This should be used via the `exact_log2' macro. */ int exact_log2_wide (x) register unsigned HOST_WIDE_INT x; { register int log = 0; /* Test for 0 or a power of 2. */ if (x == 0 || x != (x & -x)) return -1; while ((x >>= 1) != 0) log++; return log; } /* Given X, an unsigned number, return the largest int Y such that 2**Y <= X. If X is 0, return -1. This should be used via the floor_log2 macro. */ int floor_log2_wide (x) register unsigned HOST_WIDE_INT x; { register int log = -1; while (x != 0) log++, x >>= 1; return log; } static int float_handler_set; int float_handled; jmp_buf float_handler; /* Signals actually come here. */ static void float_signal (signo) /* If this is missing, some compilers complain. */ int signo ATTRIBUTE_UNUSED; { if (float_handled == 0) abort (); #if defined (USG) || defined (hpux) signal (SIGFPE, float_signal); /* re-enable the signal catcher */ #endif float_handled = 0; signal (SIGFPE, float_signal); longjmp (float_handler, 1); } /* Specify where to longjmp to when a floating arithmetic error happens. If HANDLER is 0, it means don't handle the errors any more. */ void set_float_handler (handler) jmp_buf handler; { float_handled = (handler != 0); if (handler) bcopy ((char *) handler, (char *) float_handler, sizeof (float_handler)); if (float_handled && ! float_handler_set) { signal (SIGFPE, float_signal); float_handler_set = 1; } } /* Specify, in HANDLER, where to longjmp to when a floating arithmetic error happens, pushing the previous specification into OLD_HANDLER. Return an indication of whether there was a previous handler in effect. */ int push_float_handler (handler, old_handler) jmp_buf handler, old_handler; { int was_handled = float_handled; float_handled = 1; if (was_handled) memcpy ((char *) old_handler, (char *) float_handler, sizeof (float_handler)); memcpy ((char *) float_handler, (char *) handler, sizeof (float_handler)); return was_handled; } /* Restore the previous specification of whether and where to longjmp to when a floating arithmetic error happens. */ void pop_float_handler (handled, handler) int handled; jmp_buf handler; { float_handled = handled; if (handled) bcopy ((char *) handler, (char *) float_handler, sizeof (float_handler)); } /* Handler for SIGPIPE. */ static void pipe_closed (signo) /* If this is missing, some compilers complain. */ int signo ATTRIBUTE_UNUSED; { fatal ("output pipe has been closed"); } /* Strip off a legitimate source ending from the input string NAME of length LEN. Rather than having to know the names used by all of our front ends, we strip off an ending of a period followed by up to five characters. (Java uses ".class".) */ void strip_off_ending (name, len) char *name; int len; { int i; for (i = 2; i < 6 && len > i; i++) { if (name[len - i] == '.') { name[len - i] = '\0'; break; } } } /* Output a quoted string. */ void output_quoted_string (asm_file, string) FILE *asm_file; char *string; { #ifdef OUTPUT_QUOTED_STRING OUTPUT_QUOTED_STRING (asm_file, string); #else char c; putc ('\"', asm_file); while ((c = *string++) != 0) { if (c == '\"' || c == '\\') putc ('\\', asm_file); putc (c, asm_file); } putc ('\"', asm_file); #endif } /* Output a file name in the form wanted by System V. */ void output_file_directive (asm_file, input_name) FILE *asm_file; char *input_name; { int len = strlen (input_name); char *na = input_name + len; /* NA gets INPUT_NAME sans directory names. */ while (na > input_name) { if (na[-1] == '/') break; na--; } #ifdef ASM_OUTPUT_MAIN_SOURCE_FILENAME ASM_OUTPUT_MAIN_SOURCE_FILENAME (asm_file, na); #else #ifdef ASM_OUTPUT_SOURCE_FILENAME ASM_OUTPUT_SOURCE_FILENAME (asm_file, na); #else fprintf (asm_file, "\t.file\t"); output_quoted_string (asm_file, na); fputc ('\n', asm_file); #endif #endif } /* Routine to build language identifier for object file. */ static void output_lang_identify (asm_out_file) FILE *asm_out_file; { int len = strlen (lang_identify ()) + sizeof ("__gnu_compiled_") + 1; char *s = (char *) alloca (len); sprintf (s, "__gnu_compiled_%s", lang_identify ()); ASM_OUTPUT_LABEL (asm_out_file, s); } /* Routine to open a dump file. */ static void open_dump_file (suffix, function_name) char *suffix; char *function_name; { char *dumpname; TIMEVAR (dump_time, { dumpname = (char *) xmalloc (strlen (dump_base_name) + strlen (suffix) + 1); if (rtl_dump_file != NULL) fclose (rtl_dump_file); strcpy (dumpname, dump_base_name); strcat (dumpname, suffix); rtl_dump_file = fopen (dumpname, "a"); if (rtl_dump_file == NULL) pfatal_with_name (dumpname); free (dumpname); if (function_name) fprintf (rtl_dump_file, "\n;; Function %s\n\n", function_name); }); return; } /* Routine to close a dump file. */ static void close_dump_file (func, insns) void (*func) PROTO ((FILE *, rtx)); rtx insns; { TIMEVAR (dump_time, { if (func) func (rtl_dump_file, insns); fflush (rtl_dump_file); fclose (rtl_dump_file); rtl_dump_file = NULL; }); return; } /* Routine to dump rtl into a file. */ static void dump_rtl (suffix, decl, func, insns) char *suffix; tree decl; void (*func) PROTO ((FILE *, rtx)); rtx insns; { open_dump_file (suffix, decl_printable_name (decl, 2)); close_dump_file (func, insns); } /* Routine to empty a dump file. */ static void clean_dump_file (suffix) char * suffix; { char * dumpname; dumpname = (char *) xmalloc (strlen (dump_base_name) + strlen (suffix) + 1); strcpy (dumpname, dump_base_name); strcat (dumpname, suffix); rtl_dump_file = fopen (dumpname, "w"); if (rtl_dump_file == NULL) pfatal_with_name (dumpname); free (dumpname); fclose (rtl_dump_file); rtl_dump_file = NULL; return; } /* Compile an entire file of output from cpp, named NAME. Write a file of assembly output and various debugging dumps. */ static void compile_file (name) char *name; { tree globals; int start_time; int name_specified = name != 0; if (dump_base_name == 0) dump_base_name = name ? name : "gccdump"; parse_time = 0; varconst_time = 0; integration_time = 0; jump_time = 0; cse_time = 0; gcse_time = 0; loop_time = 0; cse2_time = 0; branch_prob_time = 0; flow_time = 0; combine_time = 0; regmove_time = 0; sched_time = 0; local_alloc_time = 0; global_alloc_time = 0; sched2_time = 0; #ifdef DELAY_SLOTS dbr_sched_time = 0; #endif shorten_branch_time = 0; stack_reg_time = 0; final_time = 0; symout_time = 0; dump_time = 0; /* Initialize data in various passes. */ init_obstacks (); init_tree_codes (); name = init_parse (name); init_rtl (); init_emit_once (debug_info_level == DINFO_LEVEL_NORMAL || debug_info_level == DINFO_LEVEL_VERBOSE || flag_test_coverage); init_regs (); init_decl_processing (); init_optabs (); init_stmt (); init_expmed (); init_expr_once (); init_loop (); init_reload (); init_alias_once (); if (flag_caller_saves) init_caller_save (); /* If auxiliary info generation is desired, open the output file. This goes in the same directory as the source file--unlike all the other output files. */ if (flag_gen_aux_info) { aux_info_file = fopen (aux_info_file_name, "w"); if (aux_info_file == 0) pfatal_with_name (aux_info_file_name); } /* Clear the dump files file. */ if (rtl_dump) clean_dump_file (".rtl"); if (jump_opt_dump) clean_dump_file (".jump"); if (addressof_dump) clean_dump_file (".addressof"); if (cse_dump) clean_dump_file (".cse"); if (loop_dump) clean_dump_file (".loop"); if (cse2_dump) clean_dump_file (".cse2"); if (branch_prob_dump) clean_dump_file (".bp"); if (flow_dump) clean_dump_file (".flow"); if (combine_dump) clean_dump_file (".combine"); if (regmove_dump) clean_dump_file (".regmove"); if (sched_dump) clean_dump_file (".sched"); if (local_reg_dump) clean_dump_file (".lreg"); if (global_reg_dump) clean_dump_file (".greg"); if (sched2_dump) clean_dump_file (".sched2"); if (jump2_opt_dump) clean_dump_file (".jump2"); #ifdef DELAY_SLOTS if (dbr_sched_dump) clean_dump_file (".dbr"); #endif if (gcse_dump) clean_dump_file (".gcse"); #ifdef STACK_REGS if (stack_reg_dump) clean_dump_file (".stack"); #endif #ifdef MACHINE_DEPENDENT_REORG if (mach_dep_reorg_dump) clean_dump_file (".mach"); #endif /* Open assembler code output file. */ if (! name_specified && asm_file_name == 0) asm_out_file = stdout; else { int len = strlen (dump_base_name); register char *dumpname = (char *) xmalloc (len + 6); strcpy (dumpname, dump_base_name); strip_off_ending (dumpname, len); strcat (dumpname, ".s"); if (asm_file_name == 0) { asm_file_name = (char *) xmalloc (strlen (dumpname) + 1); strcpy (asm_file_name, dumpname); } if (!strcmp (asm_file_name, "-")) asm_out_file = stdout; else asm_out_file = fopen (asm_file_name, "w"); if (asm_out_file == 0) pfatal_with_name (asm_file_name); } #ifdef IO_BUFFER_SIZE setvbuf (asm_out_file, (char *) xmalloc (IO_BUFFER_SIZE), _IOFBF, IO_BUFFER_SIZE); #endif input_filename = name; /* Put an entry on the input file stack for the main input file. */ input_file_stack = (struct file_stack *) xmalloc (sizeof (struct file_stack)); input_file_stack->next = 0; input_file_stack->name = input_filename; /* Perform language-specific initialization. This may set main_input_filename. */ lang_init (); /* If the input doesn't start with a #line, use the input name as the official input file name. */ if (main_input_filename == 0) main_input_filename = name; ASM_FILE_START (asm_out_file); #ifdef ASM_COMMENT_START if (flag_verbose_asm) { /* Print the list of options in effect. */ print_version (asm_out_file, ASM_COMMENT_START); print_switch_values (asm_out_file, 0, MAX_LINE, ASM_COMMENT_START, " ", "\n"); /* Add a blank line here so it appears in assembler output but not screen output. */ fprintf (asm_out_file, "\n"); } #endif /* Output something to inform GDB that this compilation was by GCC. */ #ifndef ASM_IDENTIFY_GCC fprintf (asm_out_file, "gcc2_compiled.:\n"); #else ASM_IDENTIFY_GCC (asm_out_file); #endif /* Output something to identify which front-end produced this file. */ #ifdef ASM_IDENTIFY_LANGUAGE ASM_IDENTIFY_LANGUAGE (asm_out_file); #endif #ifndef ASM_OUTPUT_SECTION_NAME if (flag_function_sections) { warning ("-ffunction-sections not supported for this target."); flag_function_sections = 0; } #endif if (flag_function_sections && (profile_flag || profile_block_flag)) { warning ("-ffunction-sections disabled; it makes profiling impossible."); flag_function_sections = 0; } if (flag_function_sections && write_symbols != NO_DEBUG) warning ("-ffunction-sections may affect debugging on some targets."); /* ??? Note: There used to be a conditional here to call assemble_zeros without fail if DBX_DEBUGGING_INFO is defined. This was to guarantee separation between gcc_compiled. and the first function, for the sake of dbx on Suns. However, having the extra zero here confused the Emacs code for unexec, and might confuse other programs too. Therefore, I took out that change. In future versions we should find another way to solve that dbx problem. -- rms, 23 May 93. */ /* Don't let the first function fall at the same address as gcc_compiled., if profiling. */ if (profile_flag || profile_block_flag) { /* It's best if we can write a nop here since some assemblers don't tolerate zeros in the text section. */ if (insn_template[CODE_FOR_nop] != 0) output_asm_insn (insn_template[CODE_FOR_nop], NULL_PTR); else assemble_zeros (UNITS_PER_WORD); } /* If dbx symbol table desired, initialize writing it and output the predefined types. */ #if defined (DBX_DEBUGGING_INFO) || defined (XCOFF_DEBUGGING_INFO) if (write_symbols == DBX_DEBUG || write_symbols == XCOFF_DEBUG) TIMEVAR (symout_time, dbxout_init (asm_out_file, main_input_filename, getdecls ())); #endif #ifdef SDB_DEBUGGING_INFO if (write_symbols == SDB_DEBUG) TIMEVAR (symout_time, sdbout_init (asm_out_file, main_input_filename, getdecls ())); #endif #ifdef DWARF_DEBUGGING_INFO if (write_symbols == DWARF_DEBUG) TIMEVAR (symout_time, dwarfout_init (asm_out_file, main_input_filename)); #endif #ifdef DWARF2_UNWIND_INFO if (dwarf2out_do_frame ()) dwarf2out_frame_init (); #endif #ifdef DWARF2_DEBUGGING_INFO if (write_symbols == DWARF2_DEBUG) TIMEVAR (symout_time, dwarf2out_init (asm_out_file, main_input_filename)); #endif /* Initialize yet another pass. */ init_final (main_input_filename); init_branch_prob (dump_base_name); start_time = get_run_time (); /* Call the parser, which parses the entire file (calling rest_of_compilation for each function). */ if (yyparse () != 0) { if (errorcount == 0) fprintf (stderr, "Errors detected in input file (your bison.simple is out of date)"); /* In case there were missing closebraces, get us back to the global binding level. */ while (! global_bindings_p ()) poplevel (0, 0, 0); } output_func_start_profiler (); /* Compilation is now finished except for writing what's left of the symbol table output. */ parse_time += get_run_time () - start_time; parse_time -= integration_time; parse_time -= varconst_time; globals = getdecls (); /* Really define vars that have had only a tentative definition. Really output inline functions that must actually be callable and have not been output so far. */ { int len = list_length (globals); tree *vec = (tree *) alloca (sizeof (tree) * len); int i; tree decl; int reconsider = 1; /* Process the decls in reverse order--earliest first. Put them into VEC from back to front, then take out from front. */ for (i = 0, decl = globals; i < len; i++, decl = TREE_CHAIN (decl)) vec[len - i - 1] = decl; for (i = 0; i < len; i++) { decl = vec[i]; /* We're not deferring this any longer. */ DECL_DEFER_OUTPUT (decl) = 0; if (TREE_CODE (decl) == VAR_DECL && DECL_SIZE (decl) == 0 && incomplete_decl_finalize_hook != 0) (*incomplete_decl_finalize_hook) (decl); } /* Now emit any global variables or functions that we have been putting off. We need to loop in case one of the things emitted here references another one which comes earlier in the list. */ while (reconsider) { reconsider = 0; for (i = 0; i < len; i++) { decl = vec[i]; if (TREE_ASM_WRITTEN (decl) || DECL_EXTERNAL (decl)) continue; /* Don't write out static consts, unless we still need them. We also keep static consts if not optimizing (for debugging), unless the user specified -fno-keep-static-consts. ??? They might be better written into the debug information. This is possible when using DWARF. A language processor that wants static constants to be always written out (even if it is not used) is responsible for calling rest_of_decl_compilation itself. E.g. the C front-end calls rest_of_decl_compilation from finish_decl. One motivation for this is that is conventional in some environments to write things like: static const char rcsid[] = "... version string ..."; intending to force the string to be in the executable. A language processor that would prefer to have unneeded static constants "optimized away" would just defer writing them out until here. E.g. C++ does this, because static constants are often defined in header files. ??? A tempting alternative (for both C and C++) would be to force a constant to be written if and only if it is defined in a main file, as opposed to an include file. */ if (TREE_CODE (decl) == VAR_DECL && TREE_STATIC (decl) && (! TREE_READONLY (decl) || TREE_PUBLIC (decl) || (!optimize && flag_keep_static_consts) || TREE_SYMBOL_REFERENCED (DECL_ASSEMBLER_NAME (decl)))) { reconsider = 1; rest_of_decl_compilation (decl, NULL_PTR, 1, 1); } if (TREE_CODE (decl) == FUNCTION_DECL && DECL_INITIAL (decl) != 0 && DECL_SAVED_INSNS (decl) != 0 && (flag_keep_inline_functions || TREE_PUBLIC (decl) || TREE_SYMBOL_REFERENCED (DECL_ASSEMBLER_NAME (decl)))) { reconsider = 1; temporary_allocation (); output_inline_function (decl); permanent_allocation (1); } } } /* Now that all possible functions have been output, we can dump the exception table. */ output_exception_table (); for (i = 0; i < len; i++) { decl = vec[i]; if (TREE_CODE (decl) == VAR_DECL && TREE_STATIC (decl) && ! TREE_ASM_WRITTEN (decl)) /* Cancel the RTL for this decl so that, if debugging info output for global variables is still to come, this one will be omitted. */ DECL_RTL (decl) = NULL; /* Warn about any function declared static but not defined. We don't warn about variables, because many programs have static variables that exist only to get some text into the object file. */ if (TREE_CODE (decl) == FUNCTION_DECL && (warn_unused || TREE_SYMBOL_REFERENCED (DECL_ASSEMBLER_NAME (decl))) && DECL_INITIAL (decl) == 0 && DECL_EXTERNAL (decl) && ! DECL_ARTIFICIAL (decl) && ! TREE_PUBLIC (decl)) { pedwarn_with_decl (decl, "`%s' declared `static' but never defined"); /* This symbol is effectively an "extern" declaration now. */ TREE_PUBLIC (decl) = 1; assemble_external (decl); } /* Warn about static fns or vars defined but not used, but not about inline functions or static consts since defining those in header files is normal practice. */ if (warn_unused && ((TREE_CODE (decl) == FUNCTION_DECL && ! DECL_INLINE (decl)) || (TREE_CODE (decl) == VAR_DECL && ! TREE_READONLY (decl))) && ! DECL_IN_SYSTEM_HEADER (decl) && ! DECL_EXTERNAL (decl) && ! TREE_PUBLIC (decl) && ! TREE_USED (decl) && (TREE_CODE (decl) == FUNCTION_DECL || ! DECL_REGISTER (decl)) /* The TREE_USED bit for file-scope decls is kept in the identifier, to handle multiple external decls in different scopes. */ && ! TREE_USED (DECL_NAME (decl))) warning_with_decl (decl, "`%s' defined but not used"); #ifdef SDB_DEBUGGING_INFO /* The COFF linker can move initialized global vars to the end. And that can screw up the symbol ordering. By putting the symbols in that order to begin with, we avoid a problem. mcsun!unido!fauern!tumuc!pes@uunet.uu.net. */ if (write_symbols == SDB_DEBUG && TREE_CODE (decl) == VAR_DECL && TREE_PUBLIC (decl) && DECL_INITIAL (decl) && ! DECL_EXTERNAL (decl) && DECL_RTL (decl) != 0) TIMEVAR (symout_time, sdbout_symbol (decl, 0)); /* Output COFF information for non-global file-scope initialized variables. */ if (write_symbols == SDB_DEBUG && TREE_CODE (decl) == VAR_DECL && DECL_INITIAL (decl) && ! DECL_EXTERNAL (decl) && DECL_RTL (decl) != 0 && GET_CODE (DECL_RTL (decl)) == MEM) TIMEVAR (symout_time, sdbout_toplevel_data (decl)); #endif /* SDB_DEBUGGING_INFO */ #ifdef DWARF_DEBUGGING_INFO /* Output DWARF information for file-scope tentative data object declarations, file-scope (extern) function declarations (which had no corresponding body) and file-scope tagged type declarations and definitions which have not yet been forced out. */ if (write_symbols == DWARF_DEBUG && (TREE_CODE (decl) != FUNCTION_DECL || !DECL_INITIAL (decl))) TIMEVAR (symout_time, dwarfout_file_scope_decl (decl, 1)); #endif #ifdef DWARF2_DEBUGGING_INFO /* Output DWARF2 information for file-scope tentative data object declarations, file-scope (extern) function declarations (which had no corresponding body) and file-scope tagged type declarations and definitions which have not yet been forced out. */ if (write_symbols == DWARF2_DEBUG && (TREE_CODE (decl) != FUNCTION_DECL || !DECL_INITIAL (decl))) TIMEVAR (symout_time, dwarf2out_decl (decl)); #endif } } /* Write out any pending weak symbol declarations. */ weak_finish (); /* Do dbx symbols */ #if defined (DBX_DEBUGGING_INFO) || defined (XCOFF_DEBUGGING_INFO) if (write_symbols == DBX_DEBUG || write_symbols == XCOFF_DEBUG) TIMEVAR (symout_time, { dbxout_finish (asm_out_file, main_input_filename); }); #endif #ifdef DWARF_DEBUGGING_INFO if (write_symbols == DWARF_DEBUG) TIMEVAR (symout_time, { dwarfout_finish (); }); #endif #ifdef DWARF2_UNWIND_INFO if (dwarf2out_do_frame ()) dwarf2out_frame_finish (); #endif #ifdef DWARF2_DEBUGGING_INFO if (write_symbols == DWARF2_DEBUG) TIMEVAR (symout_time, { dwarf2out_finish (); }); #endif /* Output some stuff at end of file if nec. */ end_final (dump_base_name); if (branch_prob_dump) open_dump_file (".bp", NULL); TIMEVAR (dump_time, end_branch_prob (rtl_dump_file)); if (branch_prob_dump) close_dump_file (NULL, NULL_RTX); #ifdef ASM_FILE_END ASM_FILE_END (asm_out_file); #endif /* Language-specific end of compilation actions. */ lang_finish (); /* Close the dump files. */ if (flag_gen_aux_info) { fclose (aux_info_file); if (errorcount) unlink (aux_info_file_name); } if (combine_dump) { open_dump_file (".combine", NULL); TIMEVAR (dump_time, dump_combine_total_stats (rtl_dump_file)); close_dump_file (NULL, NULL_RTX); } /* Close non-debugging input and output files. Take special care to note whether fclose returns an error, since the pages might still be on the buffer chain while the file is open. */ finish_parse (); if (ferror (asm_out_file) != 0 || fclose (asm_out_file) != 0) fatal_io_error (asm_file_name); /* Print the times. */ if (! quiet_flag) { fprintf (stderr,"\n"); print_time ("parse", parse_time); print_time ("integration", integration_time); print_time ("jump", jump_time); print_time ("cse", cse_time); print_time ("gcse", gcse_time); print_time ("loop", loop_time); print_time ("cse2", cse2_time); print_time ("branch-prob", branch_prob_time); print_time ("flow", flow_time); print_time ("combine", combine_time); print_time ("regmove", regmove_time); print_time ("sched", sched_time); print_time ("local-alloc", local_alloc_time); print_time ("global-alloc", global_alloc_time); print_time ("sched2", sched2_time); #ifdef DELAY_SLOTS print_time ("dbranch", dbr_sched_time); #endif print_time ("shorten-branch", shorten_branch_time); print_time ("stack-reg", stack_reg_time); print_time ("final", final_time); print_time ("varconst", varconst_time); print_time ("symout", symout_time); print_time ("dump", dump_time); } } /* This is called from various places for FUNCTION_DECL, VAR_DECL, and TYPE_DECL nodes. This does nothing for local (non-static) variables. Otherwise, it sets up the RTL and outputs any assembler code (label definition, storage allocation and initialization). DECL is the declaration. If ASMSPEC is nonzero, it specifies the assembler symbol name to be used. TOP_LEVEL is nonzero if this declaration is not within a function. */ void rest_of_decl_compilation (decl, asmspec, top_level, at_end) tree decl; char *asmspec; int top_level; int at_end; { /* Declarations of variables, and of functions defined elsewhere. */ /* The most obvious approach, to put an #ifndef around where this macro is used, doesn't work since it's inside a macro call. */ #ifndef ASM_FINISH_DECLARE_OBJECT #define ASM_FINISH_DECLARE_OBJECT(FILE, DECL, TOP, END) #endif /* Forward declarations for nested functions are not "external", but we need to treat them as if they were. */ if (TREE_STATIC (decl) || DECL_EXTERNAL (decl) || TREE_CODE (decl) == FUNCTION_DECL) TIMEVAR (varconst_time, { make_decl_rtl (decl, asmspec, top_level); /* Initialized extern variable exists to be replaced with its value, or represents something that will be output in another file. */ if (! (TREE_CODE (decl) == VAR_DECL && DECL_EXTERNAL (decl) && TREE_READONLY (decl) && DECL_INITIAL (decl) != 0 && DECL_INITIAL (decl) != error_mark_node)) /* Don't output anything when a tentative file-scope definition is seen. But at end of compilation, do output code for them. */ if (! (! at_end && top_level && (DECL_INITIAL (decl) == 0 || DECL_INITIAL (decl) == error_mark_node))) assemble_variable (decl, top_level, at_end, 0); if (decl == last_assemble_variable_decl) { ASM_FINISH_DECLARE_OBJECT (asm_out_file, decl, top_level, at_end); } }); else if (DECL_REGISTER (decl) && asmspec != 0) { if (decode_reg_name (asmspec) >= 0) { DECL_RTL (decl) = 0; make_decl_rtl (decl, asmspec, top_level); } else error ("invalid register name `%s' for register variable", asmspec); } #if defined (DBX_DEBUGGING_INFO) || defined (XCOFF_DEBUGGING_INFO) else if ((write_symbols == DBX_DEBUG || write_symbols == XCOFF_DEBUG) && TREE_CODE (decl) == TYPE_DECL) TIMEVAR (symout_time, dbxout_symbol (decl, 0)); #endif #ifdef SDB_DEBUGGING_INFO else if (write_symbols == SDB_DEBUG && top_level && TREE_CODE (decl) == TYPE_DECL) TIMEVAR (symout_time, sdbout_symbol (decl, 0)); #endif } /* Called after finishing a record, union or enumeral type. */ void rest_of_type_compilation (type, toplev) #if defined(DBX_DEBUGGING_INFO) || defined(XCOFF_DEBUGGING_INFO) || defined (SDB_DEBUGGING_INFO) tree type; int toplev; #else tree type ATTRIBUTE_UNUSED; int toplev ATTRIBUTE_UNUSED; #endif { #if defined (DBX_DEBUGGING_INFO) || defined (XCOFF_DEBUGGING_INFO) if (write_symbols == DBX_DEBUG || write_symbols == XCOFF_DEBUG) TIMEVAR (symout_time, dbxout_symbol (TYPE_STUB_DECL (type), !toplev)); #endif #ifdef SDB_DEBUGGING_INFO if (write_symbols == SDB_DEBUG) TIMEVAR (symout_time, sdbout_symbol (TYPE_STUB_DECL (type), !toplev)); #endif } /* This is called from finish_function (within yyparse) after each top-level definition is parsed. It is supposed to compile that function or variable and output the assembler code for it. After we return, the tree storage is freed. */ void rest_of_compilation (decl) tree decl; { register rtx insns; int start_time = get_run_time (); int tem; /* Nonzero if we have saved the original DECL_INITIAL of the function, to be restored after we finish compiling the function (for use when compiling inline calls to this function). */ tree saved_block_tree = 0; /* Likewise, for DECL_ARGUMENTS. */ tree saved_arguments = 0; int failure = 0; /* If we are reconsidering an inline function at the end of compilation, skip the stuff for making it inline. */ if (DECL_SAVED_INSNS (decl) == 0) { int inlinable = 0; char *lose; /* If requested, consider whether to make this function inline. */ if (DECL_INLINE (decl) || flag_inline_functions) TIMEVAR (integration_time, { lose = function_cannot_inline_p (decl); if (lose || ! optimize) { if (warn_inline && DECL_INLINE (decl)) warning_with_decl (decl, lose); DECL_ABSTRACT_ORIGIN (decl) = 0; /* Don't really compile an extern inline function. If we can't make it inline, pretend it was only declared. */ if (DECL_EXTERNAL (decl)) { DECL_INITIAL (decl) = 0; goto exit_rest_of_compilation; } } else /* ??? Note that this has the effect of making it look like "inline" was specified for a function if we choose to inline it. This isn't quite right, but it's probably not worth the trouble to fix. */ inlinable = DECL_INLINE (decl) = 1; }); insns = get_insns (); /* Dump the rtl code if we are dumping rtl. */ if (rtl_dump) { open_dump_file (".rtl", decl_printable_name (decl, 2)); if (DECL_SAVED_INSNS (decl)) fprintf (rtl_dump_file, ";; (integrable)\n\n"); close_dump_file (print_rtl, insns); } /* If we can, defer compiling inlines until EOF. save_for_inline_copying can be extremely expensive. */ if (inlinable && ! decl_function_context (decl)) DECL_DEFER_OUTPUT (decl) = 1; /* If function is inline, and we don't yet know whether to compile it by itself, defer decision till end of compilation. finish_compilation will call rest_of_compilation again for those functions that need to be output. Also defer those functions that we are supposed to defer. We cannot defer functions containing nested functions since the nested function data is in our non-saved obstack. We cannot defer nested functions for the same reason. */ /* If this is a nested inline, remove ADDRESSOF now so we can finish compiling ourselves. Otherwise, wait until EOF. We have to do this because the purge_addressof transformation changes the DECL_RTL for many variables, which confuses integrate. */ if (inlinable) { if (decl_function_context (decl)) purge_addressof (insns); else DECL_DEFER_OUTPUT (decl) = 1; } if (! current_function_contains_functions && (DECL_DEFER_OUTPUT (decl) || (DECL_INLINE (decl) && ((! TREE_PUBLIC (decl) && ! TREE_ADDRESSABLE (decl) && ! flag_keep_inline_functions) || DECL_EXTERNAL (decl))))) { DECL_DEFER_OUTPUT (decl) = 1; /* If -Wreturn-type, we have to do a bit of compilation. However, if we just fall through we will call save_for_inline_copying() which results in excessive memory use. Instead, we just want to call jump_optimize() to figure out whether or not we can fall off the end of the function; we do the minimum amount of work necessary to make that safe. And, we set optimize to zero to keep jump_optimize from working too hard. */ if (warn_return_type) { int saved_optimize = optimize; optimize = 0; find_exception_handler_labels (); jump_optimize (get_insns(), !JUMP_CROSS_JUMP, !JUMP_NOOP_MOVES, !JUMP_AFTER_REGSCAN); optimize = saved_optimize; } #ifdef DWARF_DEBUGGING_INFO /* Generate the DWARF info for the "abstract" instance of a function which we may later generate inlined and/or out-of-line instances of. */ if (write_symbols == DWARF_DEBUG) { set_decl_abstract_flags (decl, 1); TIMEVAR (symout_time, dwarfout_file_scope_decl (decl, 0)); set_decl_abstract_flags (decl, 0); } #endif #ifdef DWARF2_DEBUGGING_INFO /* Generate the DWARF2 info for the "abstract" instance of a function which we may later generate inlined and/or out-of-line instances of. */ if (write_symbols == DWARF2_DEBUG) { set_decl_abstract_flags (decl, 1); TIMEVAR (symout_time, dwarf2out_decl (decl)); set_decl_abstract_flags (decl, 0); } #endif TIMEVAR (integration_time, save_for_inline_nocopy (decl)); RTX_INTEGRATED_P (DECL_SAVED_INSNS (decl)) = inlinable; goto exit_rest_of_compilation; } /* If we have to compile the function now, save its rtl and subdecls so that its compilation will not affect what others get. */ if (inlinable || DECL_DEFER_OUTPUT (decl)) { #ifdef DWARF_DEBUGGING_INFO /* Generate the DWARF info for the "abstract" instance of a function which we will generate an out-of-line instance of almost immediately (and which we may also later generate various inlined instances of). */ if (write_symbols == DWARF_DEBUG) { set_decl_abstract_flags (decl, 1); TIMEVAR (symout_time, dwarfout_file_scope_decl (decl, 0)); set_decl_abstract_flags (decl, 0); } #endif #ifdef DWARF2_DEBUGGING_INFO /* Generate the DWARF2 info for the "abstract" instance of a function which we will generate an out-of-line instance of almost immediately (and which we may also later generate various inlined instances of). */ if (write_symbols == DWARF2_DEBUG) { set_decl_abstract_flags (decl, 1); TIMEVAR (symout_time, dwarf2out_decl (decl)); set_decl_abstract_flags (decl, 0); } #endif saved_block_tree = DECL_INITIAL (decl); saved_arguments = DECL_ARGUMENTS (decl); TIMEVAR (integration_time, save_for_inline_copying (decl)); RTX_INTEGRATED_P (DECL_SAVED_INSNS (decl)) = inlinable; } /* If specified extern inline but we aren't inlining it, we are done. This goes for anything that gets here with DECL_EXTERNAL set, not just things with DECL_INLINE. */ if (DECL_EXTERNAL (decl)) goto exit_rest_of_compilation; } if (! DECL_DEFER_OUTPUT (decl)) TREE_ASM_WRITTEN (decl) = 1; /* Now that integrate will no longer see our rtl, we need not distinguish between the return value of this function and the return value of called functions. */ rtx_equal_function_value_matters = 0; /* Don't return yet if -Wreturn-type; we need to do jump_optimize. */ if ((rtl_dump_and_exit || flag_syntax_only) && !warn_return_type) { goto exit_rest_of_compilation; } /* Emit code to get eh context, if needed. */ emit_eh_context (); #ifdef FINALIZE_PIC /* If we are doing position-independent code generation, now is the time to output special prologues and epilogues. We do not want to do this earlier, because it just clutters up inline functions with meaningless insns. */ if (flag_pic) FINALIZE_PIC; #endif /* From now on, allocate rtl in current_obstack, not in saveable_obstack. Note that that may have been done above, in save_for_inline_copying. The call to resume_temporary_allocation near the end of this function goes back to the usual state of affairs. This must be done after we've built up any unwinders for exception handling, and done the FINALIZE_PIC work, if necessary. */ rtl_in_current_obstack (); insns = get_insns (); /* Copy any shared structure that should not be shared. */ unshare_all_rtl (insns); #ifdef SETJMP_VIA_SAVE_AREA /* This must be performed before virutal register instantiation. */ if (current_function_calls_alloca) optimize_save_area_alloca (insns); #endif /* Instantiate all virtual registers. */ instantiate_virtual_regs (current_function_decl, get_insns ()); /* See if we have allocated stack slots that are not directly addressable. If so, scan all the insns and create explicit address computation for all references to such slots. */ /* fixup_stack_slots (); */ /* Find all the EH handlers. */ find_exception_handler_labels (); /* Always do one jump optimization pass to ensure that JUMP_LABEL fields are initialized and to compute whether control can drop off the end of the function. */ TIMEVAR (jump_time, reg_scan (insns, max_reg_num (), 0)); TIMEVAR (jump_time, jump_optimize (insns, !JUMP_CROSS_JUMP, !JUMP_NOOP_MOVES, JUMP_AFTER_REGSCAN)); /* Now is when we stop if -fsyntax-only and -Wreturn-type. */ if (rtl_dump_and_exit || flag_syntax_only || DECL_DEFER_OUTPUT (decl)) goto exit_rest_of_compilation; /* Dump rtl code after jump, if we are doing that. */ if (jump_opt_dump) dump_rtl (".jump", decl, print_rtl, insns); /* Perform common subexpression elimination. Nonzero value from `cse_main' means that jumps were simplified and some code may now be unreachable, so do jump optimization again. */ if (optimize > 0) { if (cse_dump) open_dump_file (".cse", decl_printable_name (decl, 2)); TIMEVAR (cse_time, reg_scan (insns, max_reg_num (), 1)); if (flag_thread_jumps) /* Hacks by tiemann & kenner. */ TIMEVAR (jump_time, thread_jumps (insns, max_reg_num (), 1)); TIMEVAR (cse_time, tem = cse_main (insns, max_reg_num (), 0, rtl_dump_file)); TIMEVAR (cse_time, delete_trivially_dead_insns (insns, max_reg_num ())); if (tem || optimize > 1) TIMEVAR (jump_time, jump_optimize (insns, !JUMP_CROSS_JUMP, !JUMP_NOOP_MOVES, !JUMP_AFTER_REGSCAN)); /* Dump rtl code after cse, if we are doing that. */ if (cse_dump) close_dump_file (print_rtl, insns); } purge_addressof (insns); reg_scan (insns, max_reg_num (), 1); if (addressof_dump) dump_rtl (".addressof", decl, print_rtl, insns); /* Perform global cse. */ if (optimize > 0 && flag_gcse) { if (gcse_dump) open_dump_file (".gcse", IDENTIFIER_POINTER (DECL_NAME (decl))); TIMEVAR (gcse_time, gcse_main (insns, rtl_dump_file)); if (gcse_dump) close_dump_file (print_rtl, insns); } /* Move constant computations out of loops. */ if (optimize > 0) { if (loop_dump) open_dump_file (".loop", decl_printable_name (decl, 2)); TIMEVAR (loop_time, { if (flag_rerun_loop_opt) { /* We only want to perform unrolling once. */ loop_optimize (insns, rtl_dump_file, 0, 0); /* The first call to loop_optimize makes some instructions trivially dead. We delete those instructions now in the hope that doing so will make the heuristics in loop work better and possibly speed up compilation. */ delete_trivially_dead_insns (insns, max_reg_num ()); /* The regscan pass is currently necessary as the alias analysis code depends on this information. */ reg_scan (insns, max_reg_num (), 1); } loop_optimize (insns, rtl_dump_file, flag_unroll_loops, 1); }); /* Dump rtl code after loop opt, if we are doing that. */ if (loop_dump) close_dump_file (print_rtl, insns); } if (optimize > 0) { if (cse2_dump) open_dump_file (".cse2", decl_printable_name (decl, 2)); if (flag_rerun_cse_after_loop) { /* Running another jump optimization pass before the second cse pass sometimes simplifies the RTL enough to allow the second CSE pass to do a better job. Jump_optimize can change max_reg_num so we must rerun reg_scan afterwards. ??? Rework to not call reg_scan so often. */ TIMEVAR (jump_time, reg_scan (insns, max_reg_num (), 0)); TIMEVAR (jump_time, jump_optimize (insns, !JUMP_CROSS_JUMP, !JUMP_NOOP_MOVES, JUMP_AFTER_REGSCAN)); TIMEVAR (cse2_time, reg_scan (insns, max_reg_num (), 0)); TIMEVAR (cse2_time, tem = cse_main (insns, max_reg_num (), 1, rtl_dump_file)); if (tem) TIMEVAR (jump_time, jump_optimize (insns, !JUMP_CROSS_JUMP, !JUMP_NOOP_MOVES, !JUMP_AFTER_REGSCAN)); } if (flag_thread_jumps) { /* This pass of jump threading straightens out code that was kinked by loop optimization. */ TIMEVAR (jump_time, reg_scan (insns, max_reg_num (), 0)); TIMEVAR (jump_time, thread_jumps (insns, max_reg_num (), 0)); } /* Dump rtl code after cse, if we are doing that. */ if (cse2_dump) close_dump_file (print_rtl, insns); } if (profile_arc_flag || flag_test_coverage || flag_branch_probabilities) { if (branch_prob_dump) open_dump_file (".bp", decl_printable_name (decl, 2)); TIMEVAR (branch_prob_time, { branch_prob (insns, rtl_dump_file); }); if (branch_prob_dump) close_dump_file (print_rtl, insns); } /* We are no longer anticipating cse in this function, at least. */ cse_not_expected = 1; /* Now we choose between stupid (pcc-like) register allocation (if we got the -noreg switch and not -opt) and smart register allocation. */ if (optimize > 0) /* Stupid allocation probably won't work */ obey_regdecls = 0; /* if optimizations being done. */ regclass_init (); /* Print function header into flow dump now because doing the flow analysis makes some of the dump. */ if (flow_dump) open_dump_file (".flow", decl_printable_name (decl, 2)); if (obey_regdecls) { TIMEVAR (flow_time, { regclass (insns, max_reg_num ()); stupid_life_analysis (insns, max_reg_num (), rtl_dump_file); }); } else { /* Do control and data flow analysis, and write some of the results to dump file. */ TIMEVAR (flow_time, { find_basic_blocks (insns, max_reg_num (), rtl_dump_file, 1); life_analysis (insns, max_reg_num (), rtl_dump_file); }); if (warn_uninitialized) { uninitialized_vars_warning (DECL_INITIAL (decl)); setjmp_args_warning (); } } /* Dump rtl after flow analysis. */ if (flow_dump) close_dump_file (print_rtl_with_bb, insns); /* If -opt, try combining insns through substitution. */ if (optimize > 0) { TIMEVAR (combine_time, combine_instructions (insns, max_reg_num ())); /* Dump rtl code after insn combination. */ if (combine_dump) dump_rtl (".combine", decl, print_rtl_with_bb, insns); } /* Register allocation pre-pass, to reduce number of moves necessary for two-address machines. */ if (optimize > 0 && (flag_regmove || flag_expensive_optimizations)) { if (regmove_dump) open_dump_file (".regmove", decl_printable_name (decl, 2)); TIMEVAR (regmove_time, regmove_optimize (insns, max_reg_num (), rtl_dump_file)); if (regmove_dump) close_dump_file (print_rtl_with_bb, insns); } /* Print function header into sched dump now because doing the sched analysis makes some of the dump. */ if (optimize > 0 && flag_schedule_insns) { if (sched_dump) open_dump_file (".sched", decl_printable_name (decl, 2)); /* Do control and data sched analysis, and write some of the results to dump file. */ TIMEVAR (sched_time, schedule_insns (rtl_dump_file)); /* Dump rtl after instruction scheduling. */ if (sched_dump) close_dump_file (print_rtl_with_bb, insns); } /* Unless we did stupid register allocation, allocate pseudo-regs that are used only within 1 basic block. */ if (!obey_regdecls) TIMEVAR (local_alloc_time, { recompute_reg_usage (insns); regclass (insns, max_reg_num ()); local_alloc (); }); /* Dump rtl code after allocating regs within basic blocks. */ if (local_reg_dump) { open_dump_file (".lreg", decl_printable_name (decl, 2)); TIMEVAR (dump_time, dump_flow_info (rtl_dump_file)); TIMEVAR (dump_time, dump_local_alloc (rtl_dump_file)); close_dump_file (print_rtl_with_bb, insns); } if (global_reg_dump) open_dump_file (".greg", decl_printable_name (decl, 2)); /* Save the last label number used so far, so reorg can tell when it's safe to kill spill regs. */ max_label_num_after_reload = max_label_num (); /* Unless we did stupid register allocation, allocate remaining pseudo-regs, then do the reload pass fixing up any insns that are invalid. */ TIMEVAR (global_alloc_time, { if (!obey_regdecls) failure = global_alloc (rtl_dump_file); else failure = reload (insns, 0, rtl_dump_file); }); if (failure) goto exit_rest_of_compilation; reload_completed = 1; /* Do a very simple CSE pass over just the hard registers. */ if (optimize > 0) reload_cse_regs (insns); /* On some machines, the prologue and epilogue code, or parts thereof, can be represented as RTL. Doing so lets us schedule insns between it and the rest of the code and also allows delayed branch scheduling to operate in the epilogue. */ thread_prologue_and_epilogue_insns (insns); if (global_reg_dump) { TIMEVAR (dump_time, dump_global_regs (rtl_dump_file)); close_dump_file (print_rtl_with_bb, insns); } if (optimize > 0 && flag_schedule_insns_after_reload) { if (sched2_dump) open_dump_file (".sched2", decl_printable_name (decl, 2)); /* Do control and data sched analysis again, and write some more of the results to dump file. */ TIMEVAR (sched2_time, schedule_insns (rtl_dump_file)); /* Dump rtl after post-reorder instruction scheduling. */ if (sched2_dump) close_dump_file (print_rtl_with_bb, insns); } #ifdef LEAF_REGISTERS leaf_function = 0; if (optimize > 0 && only_leaf_regs_used () && leaf_function_p ()) leaf_function = 1; #endif /* One more attempt to remove jumps to .+1 left by dead-store-elimination. Also do cross-jumping this time and delete no-op move insns. */ if (optimize > 0) { TIMEVAR (jump_time, jump_optimize (insns, JUMP_CROSS_JUMP, JUMP_NOOP_MOVES, !JUMP_AFTER_REGSCAN)); /* Dump rtl code after jump, if we are doing that. */ if (jump2_opt_dump) dump_rtl (".jump2", decl, print_rtl_with_bb, insns); } /* If a machine dependent reorganization is needed, call it. */ #ifdef MACHINE_DEPENDENT_REORG MACHINE_DEPENDENT_REORG (insns); if (mach_dep_reorg_dump) dump_rtl (".mach", decl, print_rtl_with_bb, insns); #endif /* If a scheduling pass for delayed branches is to be done, call the scheduling code. */ #ifdef DELAY_SLOTS if (optimize > 0 && flag_delayed_branch) { TIMEVAR (dbr_sched_time, dbr_schedule (insns, rtl_dump_file)); if (dbr_sched_dump) dump_rtl (".dbr", decl, print_rtl_with_bb, insns); } #endif /* Shorten branches. */ TIMEVAR (shorten_branch_time, { shorten_branches (get_insns ()); }); #ifdef STACK_REGS if (stack_reg_dump) open_dump_file (".stack", decl_printable_name (decl, 2)); TIMEVAR (stack_reg_time, reg_to_stack (insns, rtl_dump_file)); if (stack_reg_dump) dump_rtl (".stack", decl, print_rtl_with_bb, insns); #endif /* Now turn the rtl into assembler code. */ TIMEVAR (final_time, { rtx x; char *fnname; /* Get the function's name, as described by its RTL. This may be different from the DECL_NAME name used in the source file. */ x = DECL_RTL (decl); if (GET_CODE (x) != MEM) abort (); x = XEXP (x, 0); if (GET_CODE (x) != SYMBOL_REF) abort (); fnname = XSTR (x, 0); assemble_start_function (decl, fnname); final_start_function (insns, asm_out_file, optimize); final (insns, asm_out_file, optimize, 0); final_end_function (insns, asm_out_file, optimize); assemble_end_function (decl, fnname); if (! quiet_flag) fflush (asm_out_file); /* Release all memory held by regsets now */ regset_release_memory (); }); /* Write DBX symbols if requested */ /* Note that for those inline functions where we don't initially know for certain that we will be generating an out-of-line copy, the first invocation of this routine (rest_of_compilation) will skip over this code by doing a `goto exit_rest_of_compilation;'. Later on, finish_compilation will call rest_of_compilation again for those inline functions that need to have out-of-line copies generated. During that call, we *will* be routed past here. */ #ifdef DBX_DEBUGGING_INFO if (write_symbols == DBX_DEBUG) TIMEVAR (symout_time, dbxout_function (decl)); #endif #ifdef DWARF_DEBUGGING_INFO if (write_symbols == DWARF_DEBUG) TIMEVAR (symout_time, dwarfout_file_scope_decl (decl, 0)); #endif #ifdef DWARF2_DEBUGGING_INFO if (write_symbols == DWARF2_DEBUG) TIMEVAR (symout_time, dwarf2out_decl (decl)); #endif exit_rest_of_compilation: /* In case the function was not output, don't leave any temporary anonymous types queued up for sdb output. */ #ifdef SDB_DEBUGGING_INFO if (write_symbols == SDB_DEBUG) sdbout_types (NULL_TREE); #endif /* Put back the tree of subblocks and list of arguments from before we copied them. Code generation and the output of debugging info may have modified the copy, but the original is unchanged. */ if (saved_block_tree != 0) { DECL_INITIAL (decl) = saved_block_tree; DECL_ARGUMENTS (decl) = saved_arguments; DECL_ABSTRACT_ORIGIN (decl) = NULL_TREE; } reload_completed = 0; TIMEVAR (final_time, { /* Clear out the insn_length contents now that they are no longer valid. */ init_insn_lengths (); /* Clear out the real_constant_chain before some of the rtx's it runs through become garbage. */ clear_const_double_mem (); /* Cancel the effect of rtl_in_current_obstack. */ resume_temporary_allocation (); /* Show no temporary slots allocated. */ init_temp_slots (); }); /* Make sure volatile mem refs aren't considered valid operands for arithmetic insns. We must call this here if this is a nested inline function, since the above code leaves us in the init_recog state (from final.c), and the function context push/pop code does not save/restore volatile_ok. ??? Maybe it isn't necessary for expand_start_function to call this anymore if we do it here? */ init_recog_no_volatile (); /* The parsing time is all the time spent in yyparse *except* what is spent in this function. */ parse_time -= get_run_time () - start_time; } static void display_help () { int undoc; unsigned long i; char * lang; #ifndef USE_CPPLIB printf ("Usage: %s input [switches]\n", progname); printf ("Switches:\n"); #endif printf (" -ffixed- Mark as being unavailable to the compiler\n"); printf (" -fcall-used- Mark as being corrupted by function calls\n"); printf (" -fcall-saved- Mark as being preserved across functions\n"); for (i = NUM_ELEM (f_options); i--;) { char * description = f_options[i].description; if (description != NULL && * description != 0) printf (" -f%-21s %s\n", f_options[i].string, description); } printf (" -O[number] Set optimisation level to [number]\n"); printf (" -Os Optimise for space rather than speed\n"); printf (" -pedantic Issue warnings needed by strict compliance to ANSI C\n"); printf (" -pedantic-errors Like -pedantic except that errors are produced\n"); printf (" -w Suppress warnings\n"); printf (" -W Enable extra warnings\n"); for (i = NUM_ELEM (W_options); i--;) { char * description = W_options[i].description; if (description != NULL && * description != 0) printf (" -W%-21s %s\n", W_options[i].string, description); } printf (" -Wid-clash- Warn if 2 identifiers have the same first chars\n"); printf (" -Wlarger-than- Warn if an object is larger than bytes\n"); printf (" -p Enable function profiling\n"); #if defined (BLOCK_PROFILER) || defined (FUNCTION_BLOCK_PROFILER) printf (" -a Enable block profiling \n"); #endif #if defined (BLOCK_PROFILER) || defined (FUNCTION_BLOCK_PROFILER) || defined FUNCTION_BLOCK_PROFILER_EXIT printf (" -ax Enable jump profiling \n"); #endif printf (" -o Place output into \n"); printf (" -G Put global and static data smaller than \n"); printf (" bytes into a special section (on some targets)\n"); for (i = NUM_ELEM (debug_args); i--;) { if (debug_args[i].description != NULL) printf (" -%-22s %s\n", debug_args[i].arg, debug_args[i].description); } printf (" -aux-info Emit declaration info into .X\n"); printf (" -quiet Do not display functions compiled or elapsed time\n"); printf (" -version Display the compiler's version\n"); printf (" -d[letters] Enable dumps from specific passes of the compiler\n"); printf (" -dumpbase Base name to be used for dumps from specific passes\n"); #if defined HAIFA || defined INSN_SCHEDULING printf (" -sched-verbose- Set the verbosity level of the scheduler\n"); #endif printf (" --help Display this information\n"); undoc = 0; lang = "language"; /* Display descriptions of language specific options. If there is no description, note that there is an undocumented option. If the description is empty, do not display anything. (This allows options to be deliberately undocumented, for whatever reason). If the option string is missing, then this is a marker, indicating that the description string is in fact the name of a language, whoes language specific options are to follow. */ if (NUM_ELEM (documented_lang_options) > 1) { printf ("\nLanguage specific options:\n"); for (i = 0; i < NUM_ELEM (documented_lang_options); i++) { char * description = documented_lang_options[i].description; char * option = documented_lang_options[i].option; if (description == NULL) undoc = 1; else if (* description == 0) continue; else if (option == NULL) { if (undoc) printf ("\nThere are undocumented %s specific options as well.\n", lang); undoc = 0; printf ("\n Options for %s:\n", description); lang = description; } else printf (" %-23.23s %s\n", option, description); } } if (undoc) printf ("\nThere are undocumented %s specific options as well.\n", lang); if (NUM_ELEM (target_switches) > 1 #ifdef TARGET_OPTIONS || NUM_ELEM (target_options) > 1 #endif ) { int doc = 0; undoc = 0; printf ("\nTarget specific options:\n"); for (i = NUM_ELEM (target_switches); i--;) { char * option = target_switches[i].name; char * description = target_switches[i].description; if (option == NULL) continue; else if (description == NULL) undoc = 1; else if (* description != 0) doc += printf (" %-23.23s %s\n", option, description); } #ifdef TARGET_OPTIONS for (i = NUM_ELEM (target_options); i--;) { char * option = target_options[i].prefix; char * description = target_options[i].description; if (option == NULL) continue; else if (description == NULL) undoc = 1; else if (* description != 0) doc += printf (" %-23.23s %s\n", option, description); } #endif if (undoc) { if (doc) printf ("\nThere are undocumented target specific options as well.\n"); else printf (" They exist, but they are not documented.\n"); } } } /* Compare the user specified 'option' with the language specific 'lang_option'. Return true if they match, or if 'option' is a viable prefix of 'lang_option'. */ static int check_lang_option (option, lang_option) char * option; char * lang_option; { lang_independent_options * indep_options; int len; long k; /* Ignore NULL entries. */ if (option == NULL || lang_option == NULL) return 0; len = strlen (lang_option); /* If they do not match to the first n characters then fail. */ if (strncmp (option, lang_option, len) != 0) return 0; /* Do not accept a lang option, if it matches a normal -f or -W option. Chill defines a -fpack, but we want to support -fpack-struct. */ /* An exact match is OK */ if (strlen (option) == len) return 1; /* If it is not an -f or -W option allow the match */ if (option[0] != '-') return 1; switch (option[1]) { case 'f': indep_options = f_options; break; case 'W': indep_options = W_options; break; default: return 1; } /* The option is a -f or -W option. Skip past the prefix and search for the remainder in the appropriate table of options. */ option += 2; if (option[0] == 'n' && option[1] == 'o' && option[2] == '-') option += 3; for (k = NUM_ELEM (indep_options); k--;) { if (!strcmp (option, indep_options[k].string)) { /* The option matched a language independent option, do not allow the language specific match. */ return 0; } } /* The option matches the start of the langauge specific option and it is not an exact match for a language independent option. */ return 1; } /* Entry point of cc1/c++. Decode command args, then call compile_file. Exit code is 35 if can't open files, 34 if fatal error, 33 if had nonfatal errors, else success. */ int main (argc, argv) int argc; char **argv; { register int i; char *filename = 0; int flag_print_mem = 0; int version_flag = 0; char *p; /* save in case md file wants to emit args as a comment. */ save_argc = argc; save_argv = argv; p = argv[0] + strlen (argv[0]); while (p != argv[0] && p[-1] != '/' #ifdef DIR_SEPARATOR && p[-1] != DIR_SEPARATOR #endif ) --p; progname = p; #if defined (RLIMIT_STACK) && defined (HAVE_GETRLIMIT) && defined (HAVE_SETRLIMIT) /* Get rid of any avoidable limit on stack size. */ { struct rlimit rlim; /* Set the stack limit huge so that alloca does not fail. */ getrlimit (RLIMIT_STACK, &rlim); rlim.rlim_cur = rlim.rlim_max; setrlimit (RLIMIT_STACK, &rlim); } #endif signal (SIGFPE, float_signal); #ifdef SIGPIPE signal (SIGPIPE, pipe_closed); #endif decl_printable_name = decl_name; lang_expand_expr = (lang_expand_expr_t) do_abort; /* Initialize whether `char' is signed. */ flag_signed_char = DEFAULT_SIGNED_CHAR; #ifdef DEFAULT_SHORT_ENUMS /* Initialize how much space enums occupy, by default. */ flag_short_enums = DEFAULT_SHORT_ENUMS; #endif /* Perform language-specific options intialization. */ lang_init_options (); /* Scan to see what optimization level has been specified. That will determine the default value of many flags. */ for (i = 1; i < argc; i++) { if (!strcmp (argv[i], "-O")) { optimize = 1; } else if (argv[i][0] == '-' && argv[i][1] == 'O') { /* Handle -Os, -O2, -O3, -O69, ... */ char *p = &argv[i][2]; int c; if ((p[0] == 's') && (p[1] == 0)) optimize_size = 1; else { while ((c = *p++)) if (! (c >= '0' && c <= '9')) break; if (c == 0) optimize = atoi (&argv[i][2]); } } } /* Optimizing for size forces optimize to be no less than 2. */ if (optimize_size && (optimize < 2)) optimize = 2; obey_regdecls = (optimize == 0); if (optimize >= 1) { flag_defer_pop = 1; flag_thread_jumps = 1; #ifdef DELAY_SLOTS flag_delayed_branch = 1; #endif #ifdef CAN_DEBUG_WITHOUT_FP flag_omit_frame_pointer = 1; #endif } if (optimize >= 2) { flag_cse_follow_jumps = 1; flag_cse_skip_blocks = 1; flag_gcse = 1; flag_expensive_optimizations = 1; flag_strength_reduce = 1; flag_rerun_cse_after_loop = 1; flag_rerun_loop_opt = 1; flag_caller_saves = 1; flag_force_mem = 1; #ifdef INSN_SCHEDULING flag_schedule_insns = 1; flag_schedule_insns_after_reload = 1; #endif flag_regmove = 1; flag_strict_aliasing = 1; } if (optimize >= 3) { flag_inline_functions = 1; } /* Initialize target_flags before OPTIMIZATION_OPTIONS so the latter can modify it. */ target_flags = 0; set_target_switch (""); #ifdef OPTIMIZATION_OPTIONS /* Allow default optimizations to be specified on a per-machine basis. */ OPTIMIZATION_OPTIONS (optimize, optimize_size); #endif /* Initialize register usage now so switches may override. */ init_reg_sets (); for (i = 1; i < argc; i++) { size_t j; /* If this is a language-specific option, decode it in a language-specific way. */ for (j = NUM_ELEM (documented_lang_options); j--;) if (check_lang_option (argv[i], documented_lang_options[j].option)) break; if (j != (size_t)-1) { /* If the option is valid for *some* language, treat it as valid even if this language doesn't understand it. */ int strings_processed = lang_decode_option (argc - i, argv + i); if (!strcmp (argv[i], "--help")) { display_help (); exit (0); } if (strings_processed != 0) i += strings_processed - 1; } else if (argv[i][0] == '-' && argv[i][1] != 0) { register char *str = argv[i] + 1; if (str[0] == 'Y') str++; if (str[0] == 'm') set_target_switch (&str[1]); else if (!strcmp (str, "dumpbase")) { dump_base_name = argv[++i]; } else if (str[0] == 'd') { register char *p = &str[1]; while (*p) switch (*p++) { case 'a': branch_prob_dump = 1; combine_dump = 1; #ifdef DELAY_SLOTS dbr_sched_dump = 1; #endif flow_dump = 1; global_reg_dump = 1; jump_opt_dump = 1; addressof_dump = 1; jump2_opt_dump = 1; local_reg_dump = 1; loop_dump = 1; regmove_dump = 1; rtl_dump = 1; cse_dump = 1, cse2_dump = 1; gcse_dump = 1; sched_dump = 1; sched2_dump = 1; #ifdef STACK_REGS stack_reg_dump = 1; #endif #ifdef MACHINE_DEPENDENT_REORG mach_dep_reorg_dump = 1; #endif break; case 'A': flag_debug_asm = 1; break; case 'b': branch_prob_dump = 1; break; case 'c': combine_dump = 1; break; #ifdef DELAY_SLOTS case 'd': dbr_sched_dump = 1; break; #endif case 'f': flow_dump = 1; break; case 'F': addressof_dump = 1; break; case 'g': global_reg_dump = 1; break; case 'G': gcse_dump = 1; break; case 'j': jump_opt_dump = 1; break; case 'J': jump2_opt_dump = 1; break; #ifdef STACK_REGS case 'k': stack_reg_dump = 1; break; #endif case 'l': local_reg_dump = 1; break; case 'L': loop_dump = 1; break; case 'm': flag_print_mem = 1; break; #ifdef MACHINE_DEPENDENT_REORG case 'M': mach_dep_reorg_dump = 1; break; #endif case 'p': flag_print_asm_name = 1; break; case 'r': rtl_dump = 1; break; case 'R': sched2_dump = 1; break; case 's': cse_dump = 1; break; case 'S': sched_dump = 1; break; case 't': cse2_dump = 1; break; case 'N': regmove_dump = 1; break; case 'y': set_yydebug (1); break; case 'x': rtl_dump_and_exit = 1; break; default: warning ("unrecognised gcc debugging option: %c", p[-1]); break; } } else if (str[0] == 'f') { register char *p = &str[1]; int found = 0; /* Some kind of -f option. P's value is the option sans `-f'. Search for it in the table of options. */ for (j = 0; !found && j < sizeof (f_options) / sizeof (f_options[0]); j++) { if (!strcmp (p, f_options[j].string)) { *f_options[j].variable = f_options[j].on_value; /* A goto here would be cleaner, but breaks the vax pcc. */ found = 1; } if (p[0] == 'n' && p[1] == 'o' && p[2] == '-' && ! strcmp (p+3, f_options[j].string)) { *f_options[j].variable = ! f_options[j].on_value; found = 1; } } if (found) ; #ifdef HAIFA #ifdef INSN_SCHEDULING else if (!strncmp (p, "sched-verbose-",14)) fix_sched_param("verbose",&p[14]); #endif #endif /* HAIFA */ else if (!strncmp (p, "fixed-", 6)) fix_register (&p[6], 1, 1); else if (!strncmp (p, "call-used-", 10)) fix_register (&p[10], 0, 1); else if (!strncmp (p, "call-saved-", 11)) fix_register (&p[11], 0, 0); else error ("Invalid option `%s'", argv[i]); } else if (str[0] == 'O') { register char *p = str+1; if (*p == 's') p++; else while (*p && *p >= '0' && *p <= '9') p++; if (*p == '\0') ; else error ("Invalid option `%s'", argv[i]); } else if (!strcmp (str, "pedantic")) pedantic = 1; else if (!strcmp (str, "pedantic-errors")) flag_pedantic_errors = pedantic = 1; else if (!strcmp (str, "quiet")) quiet_flag = 1; else if (!strcmp (str, "version")) version_flag = 1; else if (!strcmp (str, "w")) inhibit_warnings = 1; else if (!strcmp (str, "W")) { extra_warnings = 1; /* We save the value of warn_uninitialized, since if they put -Wuninitialized on the command line, we need to generate a warning about not using it without also specifying -O. */ if (warn_uninitialized != 1) warn_uninitialized = 2; } else if (str[0] == 'W') { register char *p = &str[1]; int found = 0; /* Some kind of -W option. P's value is the option sans `-W'. Search for it in the table of options. */ for (j = 0; !found && j < sizeof (W_options) / sizeof (W_options[0]); j++) { if (!strcmp (p, W_options[j].string)) { *W_options[j].variable = W_options[j].on_value; /* A goto here would be cleaner, but breaks the vax pcc. */ found = 1; } if (p[0] == 'n' && p[1] == 'o' && p[2] == '-' && ! strcmp (p+3, W_options[j].string)) { *W_options[j].variable = ! W_options[j].on_value; found = 1; } } if (found) ; else if (!strncmp (p, "id-clash-", 9)) { char *endp = p + 9; while (*endp) { if (*endp >= '0' && *endp <= '9') endp++; else { error ("Invalid option `%s'", argv[i]); goto id_clash_lose; } } warn_id_clash = 1; id_clash_len = atoi (str + 10); id_clash_lose: ; } else if (!strncmp (p, "larger-than-", 12)) { char *endp = p + 12; while (*endp) { if (*endp >= '0' && *endp <= '9') endp++; else { error ("Invalid option `%s'", argv[i]); goto larger_than_lose; } } warn_larger_than = 1; larger_than_size = atoi (str + 13); larger_than_lose: ; } else error ("Invalid option `%s'", argv[i]); } else if (!strcmp (str, "p")) { profile_flag = 1; } else if (!strcmp (str, "a")) { #if !defined (BLOCK_PROFILER) || !defined (FUNCTION_BLOCK_PROFILER) warning ("`-a' option (basic block profile) not supported"); #else profile_block_flag = (profile_block_flag < 2) ? 1 : 3; #endif } else if (!strcmp (str, "ax")) { #if !defined (FUNCTION_BLOCK_PROFILER_EXIT) || !defined (BLOCK_PROFILER) || !defined (FUNCTION_BLOCK_PROFILER) warning ("`-ax' option (jump profiling) not supported"); #else profile_block_flag = (!profile_block_flag || profile_block_flag == 2) ? 2 : 3; #endif } else if (str[0] == 'g') { unsigned len; unsigned level; /* A lot of code assumes write_symbols == NO_DEBUG if the debugging level is 0 (thus -gstabs1 -gstabs0 would lose track of what debugging type has been selected). This records the selected type. It is an error to specify more than one debugging type. */ static enum debug_info_type selected_debug_type = NO_DEBUG; /* Non-zero if debugging format has been explicitly set. -g and -ggdb don't explicitly set the debugging format so -gdwarf -g3 is equivalent to -gdwarf3. */ static int type_explicitly_set_p = 0; /* Indexed by enum debug_info_type. */ static char *debug_type_names[] = { "none", "stabs", "coff", "dwarf-1", "dwarf-2", "xcoff" }; /* Look up STR in the table. */ for (da = debug_args; da->arg; da++) { if (! strncmp (str, da->arg, strlen (da->arg))) { enum debug_info_type type = da->debug_type; char *p, *q; p = str + strlen (da->arg); if (*p && (*p < '0' || *p > '9')) continue; len = p - str; q = p; while (*q && (*q >= '0' && *q <= '9')) q++; if (*p) { level = atoi (p); if (len > 1 && !strncmp (str, "gdwarf", len)) { error ("use -gdwarf -g%d for DWARF v1, level %d", level, level); if (level == 2) error ("use -gdwarf-2 for DWARF v2"); } } else level = 2; /* default debugging info level */ if (*q || level > 3) { warning ("invalid debug level specification in option: `-%s'", str); /* ??? This error message is incorrect in the case of -g4 -g. */ warning ("no debugging information will be generated"); level = 0; } if (type == NO_DEBUG) { type = PREFERRED_DEBUGGING_TYPE; if (len > 1 && strncmp (str, "ggdb", len) == 0) { #if defined (DWARF2_DEBUGGING_INFO) && !defined (LINKER_DOES_NOT_WORK_WITH_DWARF2) type = DWARF2_DEBUG; #else #ifdef DBX_DEBUGGING_INFO type = DBX_DEBUG; #endif #endif } } if (type == NO_DEBUG) warning ("`-%s' not supported by this configuration of GCC", str); /* Does it conflict with an already selected type? */ if (type_explicitly_set_p /* -g/-ggdb don't conflict with anything */ && da->debug_type != NO_DEBUG && type != selected_debug_type) warning ("`-%s' ignored, conflicts with `-g%s'", str, debug_type_names[(int) selected_debug_type]); else { /* If the format has already been set, -g/-ggdb only change the debug level. */ if (type_explicitly_set_p && da->debug_type == NO_DEBUG) ; /* don't change debugging type */ else { selected_debug_type = type; type_explicitly_set_p = da->debug_type != NO_DEBUG; } write_symbols = (level == 0 ? NO_DEBUG : selected_debug_type); use_gnu_debug_info_extensions = da->use_extensions_p; debug_info_level = (enum debug_info_level) level; } break; } } if (! da->arg) warning ("`-%s' not supported by this configuration of GCC", str); } else if (!strcmp (str, "o")) { asm_file_name = argv[++i]; } else if (str[0] == 'G') { g_switch_set = TRUE; g_switch_value = atoi ((str[1] != '\0') ? str+1 : argv[++i]); } else if (!strncmp (str, "aux-info", 8)) { flag_gen_aux_info = 1; aux_info_file_name = (str[8] != '\0' ? str+8 : argv[++i]); } else if (!strcmp (str, "-help")) { display_help (); exit (0); } else error ("Invalid option `%s'", argv[i]); } else if (argv[i][0] == '+') error ("Invalid option `%s'", argv[i]); else filename = argv[i]; } /* Checker uses the frame pointer. */ if (flag_check_memory_usage) flag_omit_frame_pointer = 0; if (optimize == 0) { /* Inlining does not work if not optimizing, so force it not to be done. */ flag_no_inline = 1; warn_inline = 0; /* The c_decode_option and lang_decode_option functions set this to `2' if -Wall is used, so we can avoid giving out lots of errors for people who don't realize what -Wall does. */ if (warn_uninitialized == 1) warning ("-Wuninitialized is not supported without -O"); } #ifdef OVERRIDE_OPTIONS /* Some machines may reject certain combinations of options. */ OVERRIDE_OPTIONS; #endif if (exceptions_via_longjmp == 2) { #ifdef DWARF2_UNWIND_INFO exceptions_via_longjmp = ! DWARF2_UNWIND_INFO; #else exceptions_via_longjmp = 1; #endif } if (profile_block_flag == 3) { warning ("`-ax' and `-a' are conflicting options. `-a' ignored."); profile_block_flag = 2; } /* Unrolling all loops implies that standard loop unrolling must also be done. */ if (flag_unroll_all_loops) flag_unroll_loops = 1; /* Loop unrolling requires that strength_reduction be on also. Silently turn on strength reduction here if it isn't already on. Also, the loop unrolling code assumes that cse will be run after loop, so that must be turned on also. */ if (flag_unroll_loops) { flag_strength_reduce = 1; flag_rerun_cse_after_loop = 1; } /* Warn about options that are not supported on this machine. */ #ifndef INSN_SCHEDULING if (flag_schedule_insns || flag_schedule_insns_after_reload) warning ("instruction scheduling not supported on this target machine"); #endif #ifndef DELAY_SLOTS if (flag_delayed_branch) warning ("this target machine does not have delayed branches"); #endif /* If we are in verbose mode, write out the version and maybe all the option flags in use. */ if (version_flag) { print_version (stderr, ""); if (! quiet_flag) print_switch_values (stderr, 0, MAX_LINE, "", " ", "\n"); } compile_file (filename); #if !defined(OS2) && !defined(VMS) && (!defined(_WIN32) || defined (__CYGWIN32__)) if (flag_print_mem) { char *lim = (char *) sbrk (0); fprintf (stderr, "Data size %ld.\n", (long)(lim - (char *) &environ)); fflush (stderr); #ifndef __MSDOS__ #ifdef USG system ("ps -l 1>&2"); #else /* not USG */ system ("ps v"); #endif /* not USG */ #endif } #endif /* ! OS2 && ! VMS && (! _WIN32 || CYGWIN32) */ if (errorcount) exit (FATAL_EXIT_CODE); if (sorrycount) exit (FATAL_EXIT_CODE); exit (SUCCESS_EXIT_CODE); return 0; } /* Decode -m switches. */ /* Decode the switch -mNAME. */ static void set_target_switch (name) char *name; { register size_t j; int valid = 0; for (j = 0; j < sizeof target_switches / sizeof target_switches[0]; j++) if (!strcmp (target_switches[j].name, name)) { if (target_switches[j].value < 0) target_flags &= ~-target_switches[j].value; else target_flags |= target_switches[j].value; valid = 1; } #ifdef TARGET_OPTIONS if (!valid) for (j = 0; j < sizeof target_options / sizeof target_options[0]; j++) { int len = strlen (target_options[j].prefix); if (!strncmp (target_options[j].prefix, name, len)) { *target_options[j].variable = name + len; valid = 1; } } #endif if (!valid) error ("Invalid option `%s'", name); } /* Print version information to FILE. Each line begins with INDENT (for the case where FILE is the assembler output file). */ static void print_version (file, indent) FILE *file; char *indent; { fprintf (file, "%s%s%s version %s", indent, *indent != 0 ? " " : "", language_string, version_string); fprintf (file, " (%s)", TARGET_NAME); #ifdef __GNUC__ #ifndef __VERSION__ #define __VERSION__ "[unknown]" #endif fprintf (file, " compiled by GNU C version %s.\n", __VERSION__); #else fprintf (file, " compiled by CC.\n"); #endif } /* Print an option value and return the adjusted position in the line. ??? We don't handle error returns from fprintf (disk full); presumably other code will catch a disk full though. */ static int print_single_switch (file, pos, max, indent, sep, term, type, name) FILE *file; int pos, max; char *indent, *sep, *term, *type, *name; { /* The ultrix fprintf returns 0 on success, so compute the result we want here since we need it for the following test. */ int len = strlen (sep) + strlen (type) + strlen (name); if (pos != 0 && pos + len > max) { fprintf (file, "%s", term); pos = 0; } if (pos == 0) { fprintf (file, "%s", indent); pos = strlen (indent); } fprintf (file, "%s%s%s", sep, type, name); pos += len; return pos; } /* Print active target switches to FILE. POS is the current cursor position and MAX is the size of a "line". Each line begins with INDENT and ends with TERM. Each switch is separated from the next by SEP. */ static void print_switch_values (file, pos, max, indent, sep, term) FILE *file; int pos, max; char *indent, *sep, *term; { size_t j; char **p; /* Print the options as passed. */ pos = print_single_switch (file, pos, max, indent, *indent ? " " : "", term, "options passed: ", ""); for (p = &save_argv[1]; *p != NULL; p++) if (**p == '-') { /* Ignore these. */ if (strcmp (*p, "-o") == 0) { if (p[1] != NULL) p++; continue; } if (strcmp (*p, "-quiet") == 0) continue; if (strcmp (*p, "-version") == 0) continue; if ((*p)[1] == 'd') continue; pos = print_single_switch (file, pos, max, indent, sep, term, *p, ""); } if (pos > 0) fprintf (file, "%s", term); /* Print the -f and -m options that have been enabled. We don't handle language specific options but printing argv should suffice. */ pos = print_single_switch (file, 0, max, indent, *indent ? " " : "", term, "options enabled: ", ""); for (j = 0; j < sizeof f_options / sizeof f_options[0]; j++) if (*f_options[j].variable == f_options[j].on_value) pos = print_single_switch (file, pos, max, indent, sep, term, "-f", f_options[j].string); /* Print target specific options. */ for (j = 0; j < sizeof target_switches / sizeof target_switches[0]; j++) if (target_switches[j].name[0] != '\0' && target_switches[j].value > 0 && ((target_switches[j].value & target_flags) == target_switches[j].value)) { pos = print_single_switch (file, pos, max, indent, sep, term, "-m", target_switches[j].name); } #ifdef TARGET_OPTIONS for (j = 0; j < sizeof target_options / sizeof target_options[0]; j++) if (*target_options[j].variable != NULL) { char prefix[256]; sprintf (prefix, "-m%s", target_options[j].prefix); pos = print_single_switch (file, pos, max, indent, sep, term, prefix, *target_options[j].variable); } #endif fprintf (file, "%s", term); } /* Record the beginning of a new source file, named FILENAME. */ void debug_start_source_file (filename) register char *filename; { #ifdef DBX_DEBUGGING_INFO if (write_symbols == DBX_DEBUG) dbxout_start_new_source_file (filename); #endif #ifdef DWARF_DEBUGGING_INFO if (debug_info_level == DINFO_LEVEL_VERBOSE && write_symbols == DWARF_DEBUG) dwarfout_start_new_source_file (filename); #endif /* DWARF_DEBUGGING_INFO */ #ifdef DWARF2_DEBUGGING_INFO if (debug_info_level == DINFO_LEVEL_VERBOSE && write_symbols == DWARF2_DEBUG) dwarf2out_start_source_file (filename); #endif /* DWARF2_DEBUGGING_INFO */ #ifdef SDB_DEBUGGING_INFO if (write_symbols == SDB_DEBUG) sdbout_start_new_source_file (filename); #endif } /* Record the resumption of a source file. LINENO is the line number in the source file we are returning to. */ void debug_end_source_file (lineno) register unsigned lineno; { #ifdef DBX_DEBUGGING_INFO if (write_symbols == DBX_DEBUG) dbxout_resume_previous_source_file (); #endif #ifdef DWARF_DEBUGGING_INFO if (debug_info_level == DINFO_LEVEL_VERBOSE && write_symbols == DWARF_DEBUG) dwarfout_resume_previous_source_file (lineno); #endif /* DWARF_DEBUGGING_INFO */ #ifdef DWARF2_DEBUGGING_INFO if (debug_info_level == DINFO_LEVEL_VERBOSE && write_symbols == DWARF2_DEBUG) dwarf2out_end_source_file (); #endif /* DWARF2_DEBUGGING_INFO */ #ifdef SDB_DEBUGGING_INFO if (write_symbols == SDB_DEBUG) sdbout_resume_previous_source_file (); #endif } /* Called from check_newline in c-parse.y. The `buffer' parameter contains the tail part of the directive line, i.e. the part which is past the initial whitespace, #, whitespace, directive-name, whitespace part. */ void debug_define (lineno, buffer) register unsigned lineno; register char *buffer; { #ifdef DWARF_DEBUGGING_INFO if (debug_info_level == DINFO_LEVEL_VERBOSE && write_symbols == DWARF_DEBUG) dwarfout_define (lineno, buffer); #endif /* DWARF_DEBUGGING_INFO */ #ifdef DWARF2_DEBUGGING_INFO if (debug_info_level == DINFO_LEVEL_VERBOSE && write_symbols == DWARF2_DEBUG) dwarf2out_define (lineno, buffer); #endif /* DWARF2_DEBUGGING_INFO */ } /* Called from check_newline in c-parse.y. The `buffer' parameter contains the tail part of the directive line, i.e. the part which is past the initial whitespace, #, whitespace, directive-name, whitespace part. */ void debug_undef (lineno, buffer) register unsigned lineno; register char *buffer; { #ifdef DWARF_DEBUGGING_INFO if (debug_info_level == DINFO_LEVEL_VERBOSE && write_symbols == DWARF_DEBUG) dwarfout_undef (lineno, buffer); #endif /* DWARF_DEBUGGING_INFO */ #ifdef DWARF2_DEBUGGING_INFO if (debug_info_level == DINFO_LEVEL_VERBOSE && write_symbols == DWARF2_DEBUG) dwarf2out_undef (lineno, buffer); #endif /* DWARF2_DEBUGGING_INFO */ }