/* RTL simplification functions for GNU compiler. Copyright (C) 1987, 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc. This file is part of GNU CC. GNU CC is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. GNU CC is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GNU CC; see the file COPYING. If not, write to the Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #include "config.h" #include "system.h" #include #include "rtl.h" #include "tm_p.h" #include "regs.h" #include "hard-reg-set.h" #include "flags.h" #include "real.h" #include "insn-config.h" #include "recog.h" #include "function.h" #include "expr.h" #include "toplev.h" #include "output.h" #include "ggc.h" /* Simplification and canonicalization of RTL. */ /* Nonzero if X has the form (PLUS frame-pointer integer). We check for virtual regs here because the simplify_*_operation routines are called by integrate.c, which is called before virtual register instantiation. ?!? FIXED_BASE_PLUS_P and NONZERO_BASE_PLUS_P need to move into a header file so that their definitions can be shared with the simplification routines in simplify-rtx.c. Until then, do not change these macros without also changing the copy in simplify-rtx.c. */ #define FIXED_BASE_PLUS_P(X) \ ((X) == frame_pointer_rtx || (X) == hard_frame_pointer_rtx \ || ((X) == arg_pointer_rtx && fixed_regs[ARG_POINTER_REGNUM])\ || (X) == virtual_stack_vars_rtx \ || (X) == virtual_incoming_args_rtx \ || (GET_CODE (X) == PLUS && GET_CODE (XEXP (X, 1)) == CONST_INT \ && (XEXP (X, 0) == frame_pointer_rtx \ || XEXP (X, 0) == hard_frame_pointer_rtx \ || ((X) == arg_pointer_rtx \ && fixed_regs[ARG_POINTER_REGNUM]) \ || XEXP (X, 0) == virtual_stack_vars_rtx \ || XEXP (X, 0) == virtual_incoming_args_rtx)) \ || GET_CODE (X) == ADDRESSOF) /* Similar, but also allows reference to the stack pointer. This used to include FIXED_BASE_PLUS_P, however, we can't assume that arg_pointer_rtx by itself is nonzero, because on at least one machine, the i960, the arg pointer is zero when it is unused. */ #define NONZERO_BASE_PLUS_P(X) \ ((X) == frame_pointer_rtx || (X) == hard_frame_pointer_rtx \ || (X) == virtual_stack_vars_rtx \ || (X) == virtual_incoming_args_rtx \ || (GET_CODE (X) == PLUS && GET_CODE (XEXP (X, 1)) == CONST_INT \ && (XEXP (X, 0) == frame_pointer_rtx \ || XEXP (X, 0) == hard_frame_pointer_rtx \ || ((X) == arg_pointer_rtx \ && fixed_regs[ARG_POINTER_REGNUM]) \ || XEXP (X, 0) == virtual_stack_vars_rtx \ || XEXP (X, 0) == virtual_incoming_args_rtx)) \ || (X) == stack_pointer_rtx \ || (X) == virtual_stack_dynamic_rtx \ || (X) == virtual_outgoing_args_rtx \ || (GET_CODE (X) == PLUS && GET_CODE (XEXP (X, 1)) == CONST_INT \ && (XEXP (X, 0) == stack_pointer_rtx \ || XEXP (X, 0) == virtual_stack_dynamic_rtx \ || XEXP (X, 0) == virtual_outgoing_args_rtx)) \ || GET_CODE (X) == ADDRESSOF) /* Much code operates on (low, high) pairs; the low value is an unsigned wide int, the high value a signed wide int. We occasionally need to sign extend from low to high as if low were a signed wide int. */ #define HWI_SIGN_EXTEND(low) \ ((((HOST_WIDE_INT) low) < 0) ? ((HOST_WIDE_INT) -1) : ((HOST_WIDE_INT) 0)) static rtx simplify_plus_minus PARAMS ((enum rtx_code, enum machine_mode, rtx, rtx)); static void check_fold_consts PARAMS ((PTR)); /* Make a binary operation by properly ordering the operands and seeing if the expression folds. */ rtx simplify_gen_binary (code, mode, op0, op1) enum rtx_code code; enum machine_mode mode; rtx op0, op1; { rtx tem; /* Put complex operands first and constants second if commutative. */ if (GET_RTX_CLASS (code) == 'c' && ((CONSTANT_P (op0) && GET_CODE (op1) != CONST_INT) || (GET_RTX_CLASS (GET_CODE (op0)) == 'o' && GET_RTX_CLASS (GET_CODE (op1)) != 'o') || (GET_CODE (op0) == SUBREG && GET_RTX_CLASS (GET_CODE (SUBREG_REG (op0))) == 'o' && GET_RTX_CLASS (GET_CODE (op1)) != 'o'))) tem = op0, op0 = op1, op1 = tem; /* If this simplifies, do it. */ tem = simplify_binary_operation (code, mode, op0, op1); if (tem) return tem; /* Handle addition and subtraction of CONST_INT specially. Otherwise, just form the operation. */ if (code == PLUS && GET_CODE (op1) == CONST_INT && GET_MODE (op0) != VOIDmode) return plus_constant (op0, INTVAL (op1)); else if (code == MINUS && GET_CODE (op1) == CONST_INT && GET_MODE (op0) != VOIDmode) return plus_constant (op0, - INTVAL (op1)); else return gen_rtx_fmt_ee (code, mode, op0, op1); } /* Make a unary operation by first seeing if it folds and otherwise making the specified operation. */ rtx simplify_gen_unary (code, mode, op, op_mode) enum rtx_code code; enum machine_mode mode; rtx op; enum machine_mode op_mode; { rtx tem; /* If this simplifies, use it. */ if ((tem = simplify_unary_operation (code, mode, op, op_mode)) != 0) return tem; return gen_rtx_fmt_e (code, mode, op); } /* Likewise for ternary operations. */ rtx simplify_gen_ternary (code, mode, op0_mode, op0, op1, op2) enum rtx_code code; enum machine_mode mode, op0_mode; rtx op0, op1, op2; { rtx tem; /* If this simplifies, use it. */ if (0 != (tem = simplify_ternary_operation (code, mode, op0_mode, op0, op1, op2))) return tem; return gen_rtx_fmt_eee (code, mode, op0, op1, op2); } /* Likewise, for relational operations. */ rtx simplify_gen_relational (code, mode, op0, op1) enum rtx_code code; enum machine_mode mode; rtx op0, op1; { rtx tem; if ((tem = simplify_relational_operation (code, mode, op0, op1)) != 0) return tem; /* Put complex operands first and constants second. */ if ((CONSTANT_P (op0) && GET_CODE (op1) != CONST_INT) || (GET_RTX_CLASS (GET_CODE (op0)) == 'o' && GET_RTX_CLASS (GET_CODE (op1)) != 'o') || (GET_CODE (op0) == SUBREG && GET_RTX_CLASS (GET_CODE (SUBREG_REG (op0))) == 'o' && GET_RTX_CLASS (GET_CODE (op1)) != 'o')) tem = op0, op0 = op1, op1 = tem, code = swap_condition (code); return gen_rtx_fmt_ee (code, mode, op0, op1); } /* Replace all occurrences of OLD in X with NEW and try to simplify the resulting RTX. Return a new RTX which is as simplified as possible. */ rtx simplify_replace_rtx (x, old, new) rtx x; rtx old; rtx new; { enum rtx_code code = GET_CODE (x); enum machine_mode mode = GET_MODE (x); /* If X is OLD, return NEW. Otherwise, if this is an expression, try to build a new expression substituting recursively. If we can't do anything, return our input. */ if (x == old) return new; switch (GET_RTX_CLASS (code)) { case '1': { enum machine_mode op_mode = GET_MODE (XEXP (x, 0)); rtx op = (XEXP (x, 0) == old ? new : simplify_replace_rtx (XEXP (x, 0), old, new)); return simplify_gen_unary (code, mode, op, op_mode); } case '2': case 'c': return simplify_gen_binary (code, mode, simplify_replace_rtx (XEXP (x, 0), old, new), simplify_replace_rtx (XEXP (x, 1), old, new)); case '3': case 'b': return simplify_gen_ternary (code, mode, GET_MODE (XEXP (x, 0)), simplify_replace_rtx (XEXP (x, 0), old, new), simplify_replace_rtx (XEXP (x, 1), old, new), simplify_replace_rtx (XEXP (x, 2), old, new)); case 'x': /* The only case we try to handle is a lowpart SUBREG of a single-word CONST_INT. */ if (code == SUBREG && subreg_lowpart_p (x) && old == SUBREG_REG (x) && GET_CODE (new) == CONST_INT && GET_MODE_SIZE (GET_MODE (old)) <= UNITS_PER_WORD) return GEN_INT (INTVAL (new) & GET_MODE_MASK (mode)); return x; default: return x; } } /* Try to simplify a unary operation CODE whose output mode is to be MODE with input operand OP whose mode was originally OP_MODE. Return zero if no simplification can be made. */ rtx simplify_unary_operation (code, mode, op, op_mode) enum rtx_code code; enum machine_mode mode; rtx op; enum machine_mode op_mode; { unsigned int width = GET_MODE_BITSIZE (mode); /* The order of these tests is critical so that, for example, we don't check the wrong mode (input vs. output) for a conversion operation, such as FIX. At some point, this should be simplified. */ #if !defined(REAL_IS_NOT_DOUBLE) || defined(REAL_ARITHMETIC) if (code == FLOAT && GET_MODE (op) == VOIDmode && (GET_CODE (op) == CONST_DOUBLE || GET_CODE (op) == CONST_INT)) { HOST_WIDE_INT hv, lv; REAL_VALUE_TYPE d; if (GET_CODE (op) == CONST_INT) lv = INTVAL (op), hv = HWI_SIGN_EXTEND (lv); else lv = CONST_DOUBLE_LOW (op), hv = CONST_DOUBLE_HIGH (op); #ifdef REAL_ARITHMETIC REAL_VALUE_FROM_INT (d, lv, hv, mode); #else if (hv < 0) { d = (double) (~ hv); d *= ((double) ((HOST_WIDE_INT) 1 << (HOST_BITS_PER_WIDE_INT / 2)) * (double) ((HOST_WIDE_INT) 1 << (HOST_BITS_PER_WIDE_INT / 2))); d += (double) (unsigned HOST_WIDE_INT) (~ lv); d = (- d - 1.0); } else { d = (double) hv; d *= ((double) ((HOST_WIDE_INT) 1 << (HOST_BITS_PER_WIDE_INT / 2)) * (double) ((HOST_WIDE_INT) 1 << (HOST_BITS_PER_WIDE_INT / 2))); d += (double) (unsigned HOST_WIDE_INT) lv; } #endif /* REAL_ARITHMETIC */ d = real_value_truncate (mode, d); return CONST_DOUBLE_FROM_REAL_VALUE (d, mode); } else if (code == UNSIGNED_FLOAT && GET_MODE (op) == VOIDmode && (GET_CODE (op) == CONST_DOUBLE || GET_CODE (op) == CONST_INT)) { HOST_WIDE_INT hv, lv; REAL_VALUE_TYPE d; if (GET_CODE (op) == CONST_INT) lv = INTVAL (op), hv = HWI_SIGN_EXTEND (lv); else lv = CONST_DOUBLE_LOW (op), hv = CONST_DOUBLE_HIGH (op); if (op_mode == VOIDmode) { /* We don't know how to interpret negative-looking numbers in this case, so don't try to fold those. */ if (hv < 0) return 0; } else if (GET_MODE_BITSIZE (op_mode) >= HOST_BITS_PER_WIDE_INT * 2) ; else hv = 0, lv &= GET_MODE_MASK (op_mode); #ifdef REAL_ARITHMETIC REAL_VALUE_FROM_UNSIGNED_INT (d, lv, hv, mode); #else d = (double) (unsigned HOST_WIDE_INT) hv; d *= ((double) ((HOST_WIDE_INT) 1 << (HOST_BITS_PER_WIDE_INT / 2)) * (double) ((HOST_WIDE_INT) 1 << (HOST_BITS_PER_WIDE_INT / 2))); d += (double) (unsigned HOST_WIDE_INT) lv; #endif /* REAL_ARITHMETIC */ d = real_value_truncate (mode, d); return CONST_DOUBLE_FROM_REAL_VALUE (d, mode); } #endif if (GET_CODE (op) == CONST_INT && width <= HOST_BITS_PER_WIDE_INT && width > 0) { register HOST_WIDE_INT arg0 = INTVAL (op); register HOST_WIDE_INT val; switch (code) { case NOT: val = ~ arg0; break; case NEG: val = - arg0; break; case ABS: val = (arg0 >= 0 ? arg0 : - arg0); break; case FFS: /* Don't use ffs here. Instead, get low order bit and then its number. If arg0 is zero, this will return 0, as desired. */ arg0 &= GET_MODE_MASK (mode); val = exact_log2 (arg0 & (- arg0)) + 1; break; case TRUNCATE: val = arg0; break; case ZERO_EXTEND: if (op_mode == VOIDmode) op_mode = mode; if (GET_MODE_BITSIZE (op_mode) == HOST_BITS_PER_WIDE_INT) { /* If we were really extending the mode, we would have to distinguish between zero-extension and sign-extension. */ if (width != GET_MODE_BITSIZE (op_mode)) abort (); val = arg0; } else if (GET_MODE_BITSIZE (op_mode) < HOST_BITS_PER_WIDE_INT) val = arg0 & ~((HOST_WIDE_INT) (-1) << GET_MODE_BITSIZE (op_mode)); else return 0; break; case SIGN_EXTEND: if (op_mode == VOIDmode) op_mode = mode; if (GET_MODE_BITSIZE (op_mode) == HOST_BITS_PER_WIDE_INT) { /* If we were really extending the mode, we would have to distinguish between zero-extension and sign-extension. */ if (width != GET_MODE_BITSIZE (op_mode)) abort (); val = arg0; } else if (GET_MODE_BITSIZE (op_mode) < HOST_BITS_PER_WIDE_INT) { val = arg0 & ~((HOST_WIDE_INT) (-1) << GET_MODE_BITSIZE (op_mode)); if (val & ((HOST_WIDE_INT) 1 << (GET_MODE_BITSIZE (op_mode) - 1))) val -= (HOST_WIDE_INT) 1 << GET_MODE_BITSIZE (op_mode); } else return 0; break; case SQRT: case FLOAT_EXTEND: case FLOAT_TRUNCATE: return 0; default: abort (); } val = trunc_int_for_mode (val, mode); return GEN_INT (val); } /* We can do some operations on integer CONST_DOUBLEs. Also allow for a DImode operation on a CONST_INT. */ else if (GET_MODE (op) == VOIDmode && width <= HOST_BITS_PER_INT * 2 && (GET_CODE (op) == CONST_DOUBLE || GET_CODE (op) == CONST_INT)) { unsigned HOST_WIDE_INT l1, lv; HOST_WIDE_INT h1, hv; if (GET_CODE (op) == CONST_DOUBLE) l1 = CONST_DOUBLE_LOW (op), h1 = CONST_DOUBLE_HIGH (op); else l1 = INTVAL (op), h1 = HWI_SIGN_EXTEND (l1); switch (code) { case NOT: lv = ~ l1; hv = ~ h1; break; case NEG: neg_double (l1, h1, &lv, &hv); break; case ABS: if (h1 < 0) neg_double (l1, h1, &lv, &hv); else lv = l1, hv = h1; break; case FFS: hv = 0; if (l1 == 0) lv = HOST_BITS_PER_WIDE_INT + exact_log2 (h1 & (-h1)) + 1; else lv = exact_log2 (l1 & (-l1)) + 1; break; case TRUNCATE: /* This is just a change-of-mode, so do nothing. */ lv = l1, hv = h1; break; case ZERO_EXTEND: if (op_mode == VOIDmode || GET_MODE_BITSIZE (op_mode) > HOST_BITS_PER_WIDE_INT) return 0; hv = 0; lv = l1 & GET_MODE_MASK (op_mode); break; case SIGN_EXTEND: if (op_mode == VOIDmode || GET_MODE_BITSIZE (op_mode) > HOST_BITS_PER_WIDE_INT) return 0; else { lv = l1 & GET_MODE_MASK (op_mode); if (GET_MODE_BITSIZE (op_mode) < HOST_BITS_PER_WIDE_INT && (lv & ((HOST_WIDE_INT) 1 << (GET_MODE_BITSIZE (op_mode) - 1))) != 0) lv -= (HOST_WIDE_INT) 1 << GET_MODE_BITSIZE (op_mode); hv = HWI_SIGN_EXTEND (lv); } break; case SQRT: return 0; default: return 0; } return immed_double_const (lv, hv, mode); } #if ! defined (REAL_IS_NOT_DOUBLE) || defined (REAL_ARITHMETIC) else if (GET_CODE (op) == CONST_DOUBLE && GET_MODE_CLASS (mode) == MODE_FLOAT) { REAL_VALUE_TYPE d; jmp_buf handler; rtx x; if (setjmp (handler)) /* There used to be a warning here, but that is inadvisable. People may want to cause traps, and the natural way to do it should not get a warning. */ return 0; set_float_handler (handler); REAL_VALUE_FROM_CONST_DOUBLE (d, op); switch (code) { case NEG: d = REAL_VALUE_NEGATE (d); break; case ABS: if (REAL_VALUE_NEGATIVE (d)) d = REAL_VALUE_NEGATE (d); break; case FLOAT_TRUNCATE: d = real_value_truncate (mode, d); break; case FLOAT_EXTEND: /* All this does is change the mode. */ break; case FIX: d = REAL_VALUE_RNDZINT (d); break; case UNSIGNED_FIX: d = REAL_VALUE_UNSIGNED_RNDZINT (d); break; case SQRT: return 0; default: abort (); } x = CONST_DOUBLE_FROM_REAL_VALUE (d, mode); set_float_handler (NULL_PTR); return x; } else if (GET_CODE (op) == CONST_DOUBLE && GET_MODE_CLASS (GET_MODE (op)) == MODE_FLOAT && GET_MODE_CLASS (mode) == MODE_INT && width <= HOST_BITS_PER_WIDE_INT && width > 0) { REAL_VALUE_TYPE d; jmp_buf handler; HOST_WIDE_INT val; if (setjmp (handler)) return 0; set_float_handler (handler); REAL_VALUE_FROM_CONST_DOUBLE (d, op); switch (code) { case FIX: val = REAL_VALUE_FIX (d); break; case UNSIGNED_FIX: val = REAL_VALUE_UNSIGNED_FIX (d); break; default: abort (); } set_float_handler (NULL_PTR); val = trunc_int_for_mode (val, mode); return GEN_INT (val); } #endif /* This was formerly used only for non-IEEE float. eggert@twinsun.com says it is safe for IEEE also. */ else { enum rtx_code reversed; /* There are some simplifications we can do even if the operands aren't constant. */ switch (code) { case NOT: /* (not (not X)) == X. */ if (GET_CODE (op) == NOT) return XEXP (op, 0); /* (not (eq X Y)) == (ne X Y), etc. */ if (mode == BImode && GET_RTX_CLASS (GET_CODE (op)) == '<' && ((reversed = reversed_comparison_code (op, NULL_RTX)) != UNKNOWN)) return gen_rtx_fmt_ee (reversed, op_mode, XEXP (op, 0), XEXP (op, 1)); break; case NEG: /* (neg (neg X)) == X. */ if (GET_CODE (op) == NEG) return XEXP (op, 0); break; case SIGN_EXTEND: /* (sign_extend (truncate (minus (label_ref L1) (label_ref L2)))) becomes just the MINUS if its mode is MODE. This allows folding switch statements on machines using casesi (such as the Vax). */ if (GET_CODE (op) == TRUNCATE && GET_MODE (XEXP (op, 0)) == mode && GET_CODE (XEXP (op, 0)) == MINUS && GET_CODE (XEXP (XEXP (op, 0), 0)) == LABEL_REF && GET_CODE (XEXP (XEXP (op, 0), 1)) == LABEL_REF) return XEXP (op, 0); #ifdef POINTERS_EXTEND_UNSIGNED if (! POINTERS_EXTEND_UNSIGNED && mode == Pmode && GET_MODE (op) == ptr_mode && (CONSTANT_P (op) || (GET_CODE (op) == SUBREG && GET_CODE (SUBREG_REG (op)) == REG && REG_POINTER (SUBREG_REG (op)) && GET_MODE (SUBREG_REG (op)) == Pmode))) return convert_memory_address (Pmode, op); #endif break; #ifdef POINTERS_EXTEND_UNSIGNED case ZERO_EXTEND: if (POINTERS_EXTEND_UNSIGNED && mode == Pmode && GET_MODE (op) == ptr_mode && (CONSTANT_P (op) || (GET_CODE (op) == SUBREG && GET_CODE (SUBREG_REG (op)) == REG && REG_POINTER (SUBREG_REG (op)) && GET_MODE (SUBREG_REG (op)) == Pmode))) return convert_memory_address (Pmode, op); break; #endif default: break; } return 0; } } /* Simplify a binary operation CODE with result mode MODE, operating on OP0 and OP1. Return 0 if no simplification is possible. Don't use this for relational operations such as EQ or LT. Use simplify_relational_operation instead. */ rtx simplify_binary_operation (code, mode, op0, op1) enum rtx_code code; enum machine_mode mode; rtx op0, op1; { register HOST_WIDE_INT arg0, arg1, arg0s, arg1s; HOST_WIDE_INT val; unsigned int width = GET_MODE_BITSIZE (mode); rtx tem; /* Relational operations don't work here. We must know the mode of the operands in order to do the comparison correctly. Assuming a full word can give incorrect results. Consider comparing 128 with -128 in QImode. */ if (GET_RTX_CLASS (code) == '<') abort (); #if ! defined (REAL_IS_NOT_DOUBLE) || defined (REAL_ARITHMETIC) if (GET_MODE_CLASS (mode) == MODE_FLOAT && GET_CODE (op0) == CONST_DOUBLE && GET_CODE (op1) == CONST_DOUBLE && mode == GET_MODE (op0) && mode == GET_MODE (op1)) { REAL_VALUE_TYPE f0, f1, value; jmp_buf handler; if (setjmp (handler)) return 0; set_float_handler (handler); REAL_VALUE_FROM_CONST_DOUBLE (f0, op0); REAL_VALUE_FROM_CONST_DOUBLE (f1, op1); f0 = real_value_truncate (mode, f0); f1 = real_value_truncate (mode, f1); #ifdef REAL_ARITHMETIC #ifndef REAL_INFINITY if (code == DIV && REAL_VALUES_EQUAL (f1, dconst0)) return 0; #endif REAL_ARITHMETIC (value, rtx_to_tree_code (code), f0, f1); #else switch (code) { case PLUS: value = f0 + f1; break; case MINUS: value = f0 - f1; break; case MULT: value = f0 * f1; break; case DIV: #ifndef REAL_INFINITY if (f1 == 0) return 0; #endif value = f0 / f1; break; case SMIN: value = MIN (f0, f1); break; case SMAX: value = MAX (f0, f1); break; default: abort (); } #endif value = real_value_truncate (mode, value); set_float_handler (NULL_PTR); return CONST_DOUBLE_FROM_REAL_VALUE (value, mode); } #endif /* not REAL_IS_NOT_DOUBLE, or REAL_ARITHMETIC */ /* We can fold some multi-word operations. */ if (GET_MODE_CLASS (mode) == MODE_INT && width == HOST_BITS_PER_WIDE_INT * 2 && (GET_CODE (op0) == CONST_DOUBLE || GET_CODE (op0) == CONST_INT) && (GET_CODE (op1) == CONST_DOUBLE || GET_CODE (op1) == CONST_INT)) { unsigned HOST_WIDE_INT l1, l2, lv; HOST_WIDE_INT h1, h2, hv; if (GET_CODE (op0) == CONST_DOUBLE) l1 = CONST_DOUBLE_LOW (op0), h1 = CONST_DOUBLE_HIGH (op0); else l1 = INTVAL (op0), h1 = HWI_SIGN_EXTEND (l1); if (GET_CODE (op1) == CONST_DOUBLE) l2 = CONST_DOUBLE_LOW (op1), h2 = CONST_DOUBLE_HIGH (op1); else l2 = INTVAL (op1), h2 = HWI_SIGN_EXTEND (l2); switch (code) { case MINUS: /* A - B == A + (-B). */ neg_double (l2, h2, &lv, &hv); l2 = lv, h2 = hv; /* .. fall through ... */ case PLUS: add_double (l1, h1, l2, h2, &lv, &hv); break; case MULT: mul_double (l1, h1, l2, h2, &lv, &hv); break; case DIV: case MOD: case UDIV: case UMOD: /* We'd need to include tree.h to do this and it doesn't seem worth it. */ return 0; case AND: lv = l1 & l2, hv = h1 & h2; break; case IOR: lv = l1 | l2, hv = h1 | h2; break; case XOR: lv = l1 ^ l2, hv = h1 ^ h2; break; case SMIN: if (h1 < h2 || (h1 == h2 && ((unsigned HOST_WIDE_INT) l1 < (unsigned HOST_WIDE_INT) l2))) lv = l1, hv = h1; else lv = l2, hv = h2; break; case SMAX: if (h1 > h2 || (h1 == h2 && ((unsigned HOST_WIDE_INT) l1 > (unsigned HOST_WIDE_INT) l2))) lv = l1, hv = h1; else lv = l2, hv = h2; break; case UMIN: if ((unsigned HOST_WIDE_INT) h1 < (unsigned HOST_WIDE_INT) h2 || (h1 == h2 && ((unsigned HOST_WIDE_INT) l1 < (unsigned HOST_WIDE_INT) l2))) lv = l1, hv = h1; else lv = l2, hv = h2; break; case UMAX: if ((unsigned HOST_WIDE_INT) h1 > (unsigned HOST_WIDE_INT) h2 || (h1 == h2 && ((unsigned HOST_WIDE_INT) l1 > (unsigned HOST_WIDE_INT) l2))) lv = l1, hv = h1; else lv = l2, hv = h2; break; case LSHIFTRT: case ASHIFTRT: case ASHIFT: case ROTATE: case ROTATERT: #ifdef SHIFT_COUNT_TRUNCATED if (SHIFT_COUNT_TRUNCATED) l2 &= (GET_MODE_BITSIZE (mode) - 1), h2 = 0; #endif if (h2 != 0 || l2 >= GET_MODE_BITSIZE (mode)) return 0; if (code == LSHIFTRT || code == ASHIFTRT) rshift_double (l1, h1, l2, GET_MODE_BITSIZE (mode), &lv, &hv, code == ASHIFTRT); else if (code == ASHIFT) lshift_double (l1, h1, l2, GET_MODE_BITSIZE (mode), &lv, &hv, 1); else if (code == ROTATE) lrotate_double (l1, h1, l2, GET_MODE_BITSIZE (mode), &lv, &hv); else /* code == ROTATERT */ rrotate_double (l1, h1, l2, GET_MODE_BITSIZE (mode), &lv, &hv); break; default: return 0; } return immed_double_const (lv, hv, mode); } if (GET_CODE (op0) != CONST_INT || GET_CODE (op1) != CONST_INT || width > HOST_BITS_PER_WIDE_INT || width == 0) { /* Even if we can't compute a constant result, there are some cases worth simplifying. */ switch (code) { case PLUS: /* In IEEE floating point, x+0 is not the same as x. Similarly for the other optimizations below. */ if (TARGET_FLOAT_FORMAT == IEEE_FLOAT_FORMAT && FLOAT_MODE_P (mode) && ! flag_unsafe_math_optimizations) break; if (op1 == CONST0_RTX (mode)) return op0; /* ((-a) + b) -> (b - a) and similarly for (a + (-b)) */ if (GET_CODE (op0) == NEG) return simplify_gen_binary (MINUS, mode, op1, XEXP (op0, 0)); else if (GET_CODE (op1) == NEG) return simplify_gen_binary (MINUS, mode, op0, XEXP (op1, 0)); /* Handle both-operands-constant cases. We can only add CONST_INTs to constants since the sum of relocatable symbols can't be handled by most assemblers. Don't add CONST_INT to CONST_INT since overflow won't be computed properly if wider than HOST_BITS_PER_WIDE_INT. */ if (CONSTANT_P (op0) && GET_MODE (op0) != VOIDmode && GET_CODE (op1) == CONST_INT) return plus_constant (op0, INTVAL (op1)); else if (CONSTANT_P (op1) && GET_MODE (op1) != VOIDmode && GET_CODE (op0) == CONST_INT) return plus_constant (op1, INTVAL (op0)); /* See if this is something like X * C - X or vice versa or if the multiplication is written as a shift. If so, we can distribute and make a new multiply, shift, or maybe just have X (if C is 2 in the example above). But don't make real multiply if we didn't have one before. */ if (! FLOAT_MODE_P (mode)) { HOST_WIDE_INT coeff0 = 1, coeff1 = 1; rtx lhs = op0, rhs = op1; int had_mult = 0; if (GET_CODE (lhs) == NEG) coeff0 = -1, lhs = XEXP (lhs, 0); else if (GET_CODE (lhs) == MULT && GET_CODE (XEXP (lhs, 1)) == CONST_INT) { coeff0 = INTVAL (XEXP (lhs, 1)), lhs = XEXP (lhs, 0); had_mult = 1; } else if (GET_CODE (lhs) == ASHIFT && GET_CODE (XEXP (lhs, 1)) == CONST_INT && INTVAL (XEXP (lhs, 1)) >= 0 && INTVAL (XEXP (lhs, 1)) < HOST_BITS_PER_WIDE_INT) { coeff0 = ((HOST_WIDE_INT) 1) << INTVAL (XEXP (lhs, 1)); lhs = XEXP (lhs, 0); } if (GET_CODE (rhs) == NEG) coeff1 = -1, rhs = XEXP (rhs, 0); else if (GET_CODE (rhs) == MULT && GET_CODE (XEXP (rhs, 1)) == CONST_INT) { coeff1 = INTVAL (XEXP (rhs, 1)), rhs = XEXP (rhs, 0); had_mult = 1; } else if (GET_CODE (rhs) == ASHIFT && GET_CODE (XEXP (rhs, 1)) == CONST_INT && INTVAL (XEXP (rhs, 1)) >= 0 && INTVAL (XEXP (rhs, 1)) < HOST_BITS_PER_WIDE_INT) { coeff1 = ((HOST_WIDE_INT) 1) << INTVAL (XEXP (rhs, 1)); rhs = XEXP (rhs, 0); } if (rtx_equal_p (lhs, rhs)) { tem = simplify_gen_binary (MULT, mode, lhs, GEN_INT (coeff0 + coeff1)); return (GET_CODE (tem) == MULT && ! had_mult) ? 0 : tem; } } /* If one of the operands is a PLUS or a MINUS, see if we can simplify this by the associative law. Don't use the associative law for floating point. The inaccuracy makes it nonassociative, and subtle programs can break if operations are associated. */ if (INTEGRAL_MODE_P (mode) && (GET_CODE (op0) == PLUS || GET_CODE (op0) == MINUS || GET_CODE (op1) == PLUS || GET_CODE (op1) == MINUS) && (tem = simplify_plus_minus (code, mode, op0, op1)) != 0) return tem; break; case COMPARE: #ifdef HAVE_cc0 /* Convert (compare FOO (const_int 0)) to FOO unless we aren't using cc0, in which case we want to leave it as a COMPARE so we can distinguish it from a register-register-copy. In IEEE floating point, x-0 is not the same as x. */ if ((TARGET_FLOAT_FORMAT != IEEE_FLOAT_FORMAT || ! FLOAT_MODE_P (mode) || flag_unsafe_math_optimizations) && op1 == CONST0_RTX (mode)) return op0; #endif /* Convert (compare (gt (flags) 0) (lt (flags) 0)) to (flags). */ if (((GET_CODE (op0) == GT && GET_CODE (op1) == LT) || (GET_CODE (op0) == GTU && GET_CODE (op1) == LTU)) && XEXP (op0, 1) == const0_rtx && XEXP (op1, 1) == const0_rtx) { rtx xop00 = XEXP (op0, 0); rtx xop10 = XEXP (op1, 0); #ifdef HAVE_cc0 if (GET_CODE (xop00) == CC0 && GET_CODE (xop10) == CC0) #else if (GET_CODE (xop00) == REG && GET_CODE (xop10) == REG && GET_MODE (xop00) == GET_MODE (xop10) && REGNO (xop00) == REGNO (xop10) && GET_MODE_CLASS (GET_MODE (xop00)) == MODE_CC && GET_MODE_CLASS (GET_MODE (xop10)) == MODE_CC) #endif return xop00; } break; case MINUS: /* None of these optimizations can be done for IEEE floating point. */ if (TARGET_FLOAT_FORMAT == IEEE_FLOAT_FORMAT && FLOAT_MODE_P (mode) && ! flag_unsafe_math_optimizations) break; /* We can't assume x-x is 0 even with non-IEEE floating point, but since it is zero except in very strange circumstances, we will treat it as zero with -funsafe-math-optimizations. */ if (rtx_equal_p (op0, op1) && ! side_effects_p (op0) && (! FLOAT_MODE_P (mode) || flag_unsafe_math_optimizations)) return CONST0_RTX (mode); /* Change subtraction from zero into negation. */ if (op0 == CONST0_RTX (mode)) return gen_rtx_NEG (mode, op1); /* (-1 - a) is ~a. */ if (op0 == constm1_rtx) return gen_rtx_NOT (mode, op1); /* Subtracting 0 has no effect. */ if (op1 == CONST0_RTX (mode)) return op0; /* See if this is something like X * C - X or vice versa or if the multiplication is written as a shift. If so, we can distribute and make a new multiply, shift, or maybe just have X (if C is 2 in the example above). But don't make real multiply if we didn't have one before. */ if (! FLOAT_MODE_P (mode)) { HOST_WIDE_INT coeff0 = 1, coeff1 = 1; rtx lhs = op0, rhs = op1; int had_mult = 0; if (GET_CODE (lhs) == NEG) coeff0 = -1, lhs = XEXP (lhs, 0); else if (GET_CODE (lhs) == MULT && GET_CODE (XEXP (lhs, 1)) == CONST_INT) { coeff0 = INTVAL (XEXP (lhs, 1)), lhs = XEXP (lhs, 0); had_mult = 1; } else if (GET_CODE (lhs) == ASHIFT && GET_CODE (XEXP (lhs, 1)) == CONST_INT && INTVAL (XEXP (lhs, 1)) >= 0 && INTVAL (XEXP (lhs, 1)) < HOST_BITS_PER_WIDE_INT) { coeff0 = ((HOST_WIDE_INT) 1) << INTVAL (XEXP (lhs, 1)); lhs = XEXP (lhs, 0); } if (GET_CODE (rhs) == NEG) coeff1 = - 1, rhs = XEXP (rhs, 0); else if (GET_CODE (rhs) == MULT && GET_CODE (XEXP (rhs, 1)) == CONST_INT) { coeff1 = INTVAL (XEXP (rhs, 1)), rhs = XEXP (rhs, 0); had_mult = 1; } else if (GET_CODE (rhs) == ASHIFT && GET_CODE (XEXP (rhs, 1)) == CONST_INT && INTVAL (XEXP (rhs, 1)) >= 0 && INTVAL (XEXP (rhs, 1)) < HOST_BITS_PER_WIDE_INT) { coeff1 = ((HOST_WIDE_INT) 1) << INTVAL (XEXP (rhs, 1)); rhs = XEXP (rhs, 0); } if (rtx_equal_p (lhs, rhs)) { tem = simplify_gen_binary (MULT, mode, lhs, GEN_INT (coeff0 - coeff1)); return (GET_CODE (tem) == MULT && ! had_mult) ? 0 : tem; } } /* (a - (-b)) -> (a + b). */ if (GET_CODE (op1) == NEG) return simplify_gen_binary (PLUS, mode, op0, XEXP (op1, 0)); /* If one of the operands is a PLUS or a MINUS, see if we can simplify this by the associative law. Don't use the associative law for floating point. The inaccuracy makes it nonassociative, and subtle programs can break if operations are associated. */ if (INTEGRAL_MODE_P (mode) && (GET_CODE (op0) == PLUS || GET_CODE (op0) == MINUS || GET_CODE (op1) == PLUS || GET_CODE (op1) == MINUS) && (tem = simplify_plus_minus (code, mode, op0, op1)) != 0) return tem; /* Don't let a relocatable value get a negative coeff. */ if (GET_CODE (op1) == CONST_INT && GET_MODE (op0) != VOIDmode) return plus_constant (op0, - INTVAL (op1)); /* (x - (x & y)) -> (x & ~y) */ if (GET_CODE (op1) == AND) { if (rtx_equal_p (op0, XEXP (op1, 0))) return simplify_gen_binary (AND, mode, op0, gen_rtx_NOT (mode, XEXP (op1, 1))); if (rtx_equal_p (op0, XEXP (op1, 1))) return simplify_gen_binary (AND, mode, op0, gen_rtx_NOT (mode, XEXP (op1, 0))); } break; case MULT: if (op1 == constm1_rtx) { tem = simplify_unary_operation (NEG, mode, op0, mode); return tem ? tem : gen_rtx_NEG (mode, op0); } /* In IEEE floating point, x*0 is not always 0. */ if ((TARGET_FLOAT_FORMAT != IEEE_FLOAT_FORMAT || ! FLOAT_MODE_P (mode) || flag_unsafe_math_optimizations) && op1 == CONST0_RTX (mode) && ! side_effects_p (op0)) return op1; /* In IEEE floating point, x*1 is not equivalent to x for nans. However, ANSI says we can drop signals, so we can do this anyway. */ if (op1 == CONST1_RTX (mode)) return op0; /* Convert multiply by constant power of two into shift unless we are still generating RTL. This test is a kludge. */ if (GET_CODE (op1) == CONST_INT && (val = exact_log2 (INTVAL (op1))) >= 0 /* If the mode is larger than the host word size, and the uppermost bit is set, then this isn't a power of two due to implicit sign extension. */ && (width <= HOST_BITS_PER_WIDE_INT || val != HOST_BITS_PER_WIDE_INT - 1) && ! rtx_equal_function_value_matters) return gen_rtx_ASHIFT (mode, op0, GEN_INT (val)); if (GET_CODE (op1) == CONST_DOUBLE && GET_MODE_CLASS (GET_MODE (op1)) == MODE_FLOAT) { REAL_VALUE_TYPE d; jmp_buf handler; int op1is2, op1ism1; if (setjmp (handler)) return 0; set_float_handler (handler); REAL_VALUE_FROM_CONST_DOUBLE (d, op1); op1is2 = REAL_VALUES_EQUAL (d, dconst2); op1ism1 = REAL_VALUES_EQUAL (d, dconstm1); set_float_handler (NULL_PTR); /* x*2 is x+x and x*(-1) is -x */ if (op1is2 && GET_MODE (op0) == mode) return gen_rtx_PLUS (mode, op0, copy_rtx (op0)); else if (op1ism1 && GET_MODE (op0) == mode) return gen_rtx_NEG (mode, op0); } break; case IOR: if (op1 == const0_rtx) return op0; if (GET_CODE (op1) == CONST_INT && (INTVAL (op1) & GET_MODE_MASK (mode)) == GET_MODE_MASK (mode)) return op1; if (rtx_equal_p (op0, op1) && ! side_effects_p (op0)) return op0; /* A | (~A) -> -1 */ if (((GET_CODE (op0) == NOT && rtx_equal_p (XEXP (op0, 0), op1)) || (GET_CODE (op1) == NOT && rtx_equal_p (XEXP (op1, 0), op0))) && ! side_effects_p (op0) && GET_MODE_CLASS (mode) != MODE_CC) return constm1_rtx; break; case XOR: if (op1 == const0_rtx) return op0; if (GET_CODE (op1) == CONST_INT && (INTVAL (op1) & GET_MODE_MASK (mode)) == GET_MODE_MASK (mode)) return gen_rtx_NOT (mode, op0); if (op0 == op1 && ! side_effects_p (op0) && GET_MODE_CLASS (mode) != MODE_CC) return const0_rtx; break; case AND: if (op1 == const0_rtx && ! side_effects_p (op0)) return const0_rtx; if (GET_CODE (op1) == CONST_INT && (INTVAL (op1) & GET_MODE_MASK (mode)) == GET_MODE_MASK (mode)) return op0; if (op0 == op1 && ! side_effects_p (op0) && GET_MODE_CLASS (mode) != MODE_CC) return op0; /* A & (~A) -> 0 */ if (((GET_CODE (op0) == NOT && rtx_equal_p (XEXP (op0, 0), op1)) || (GET_CODE (op1) == NOT && rtx_equal_p (XEXP (op1, 0), op0))) && ! side_effects_p (op0) && GET_MODE_CLASS (mode) != MODE_CC) return const0_rtx; break; case UDIV: /* Convert divide by power of two into shift (divide by 1 handled below). */ if (GET_CODE (op1) == CONST_INT && (arg1 = exact_log2 (INTVAL (op1))) > 0) return gen_rtx_LSHIFTRT (mode, op0, GEN_INT (arg1)); /* ... fall through ... */ case DIV: if (op1 == CONST1_RTX (mode)) return op0; /* In IEEE floating point, 0/x is not always 0. */ if ((TARGET_FLOAT_FORMAT != IEEE_FLOAT_FORMAT || ! FLOAT_MODE_P (mode) || flag_unsafe_math_optimizations) && op0 == CONST0_RTX (mode) && ! side_effects_p (op1)) return op0; #if ! defined (REAL_IS_NOT_DOUBLE) || defined (REAL_ARITHMETIC) /* Change division by a constant into multiplication. Only do this with -funsafe-math-optimizations. */ else if (GET_CODE (op1) == CONST_DOUBLE && GET_MODE_CLASS (GET_MODE (op1)) == MODE_FLOAT && op1 != CONST0_RTX (mode) && flag_unsafe_math_optimizations) { REAL_VALUE_TYPE d; REAL_VALUE_FROM_CONST_DOUBLE (d, op1); if (! REAL_VALUES_EQUAL (d, dconst0)) { #if defined (REAL_ARITHMETIC) REAL_ARITHMETIC (d, rtx_to_tree_code (DIV), dconst1, d); return gen_rtx_MULT (mode, op0, CONST_DOUBLE_FROM_REAL_VALUE (d, mode)); #else return gen_rtx_MULT (mode, op0, CONST_DOUBLE_FROM_REAL_VALUE (1./d, mode)); #endif } } #endif break; case UMOD: /* Handle modulus by power of two (mod with 1 handled below). */ if (GET_CODE (op1) == CONST_INT && exact_log2 (INTVAL (op1)) > 0) return gen_rtx_AND (mode, op0, GEN_INT (INTVAL (op1) - 1)); /* ... fall through ... */ case MOD: if ((op0 == const0_rtx || op1 == const1_rtx) && ! side_effects_p (op0) && ! side_effects_p (op1)) return const0_rtx; break; case ROTATERT: case ROTATE: /* Rotating ~0 always results in ~0. */ if (GET_CODE (op0) == CONST_INT && width <= HOST_BITS_PER_WIDE_INT && (unsigned HOST_WIDE_INT) INTVAL (op0) == GET_MODE_MASK (mode) && ! side_effects_p (op1)) return op0; /* ... fall through ... */ case ASHIFT: case ASHIFTRT: case LSHIFTRT: if (op1 == const0_rtx) return op0; if (op0 == const0_rtx && ! side_effects_p (op1)) return op0; break; case SMIN: if (width <= HOST_BITS_PER_WIDE_INT && GET_CODE (op1) == CONST_INT && INTVAL (op1) == (HOST_WIDE_INT) 1 << (width -1) && ! side_effects_p (op0)) return op1; else if (rtx_equal_p (op0, op1) && ! side_effects_p (op0)) return op0; break; case SMAX: if (width <= HOST_BITS_PER_WIDE_INT && GET_CODE (op1) == CONST_INT && ((unsigned HOST_WIDE_INT) INTVAL (op1) == (unsigned HOST_WIDE_INT) GET_MODE_MASK (mode) >> 1) && ! side_effects_p (op0)) return op1; else if (rtx_equal_p (op0, op1) && ! side_effects_p (op0)) return op0; break; case UMIN: if (op1 == const0_rtx && ! side_effects_p (op0)) return op1; else if (rtx_equal_p (op0, op1) && ! side_effects_p (op0)) return op0; break; case UMAX: if (op1 == constm1_rtx && ! side_effects_p (op0)) return op1; else if (rtx_equal_p (op0, op1) && ! side_effects_p (op0)) return op0; break; default: abort (); } return 0; } /* Get the integer argument values in two forms: zero-extended in ARG0, ARG1 and sign-extended in ARG0S, ARG1S. */ arg0 = INTVAL (op0); arg1 = INTVAL (op1); if (width < HOST_BITS_PER_WIDE_INT) { arg0 &= ((HOST_WIDE_INT) 1 << width) - 1; arg1 &= ((HOST_WIDE_INT) 1 << width) - 1; arg0s = arg0; if (arg0s & ((HOST_WIDE_INT) 1 << (width - 1))) arg0s |= ((HOST_WIDE_INT) (-1) << width); arg1s = arg1; if (arg1s & ((HOST_WIDE_INT) 1 << (width - 1))) arg1s |= ((HOST_WIDE_INT) (-1) << width); } else { arg0s = arg0; arg1s = arg1; } /* Compute the value of the arithmetic. */ switch (code) { case PLUS: val = arg0s + arg1s; break; case MINUS: val = arg0s - arg1s; break; case MULT: val = arg0s * arg1s; break; case DIV: if (arg1s == 0) return 0; val = arg0s / arg1s; break; case MOD: if (arg1s == 0) return 0; val = arg0s % arg1s; break; case UDIV: if (arg1 == 0) return 0; val = (unsigned HOST_WIDE_INT) arg0 / arg1; break; case UMOD: if (arg1 == 0) return 0; val = (unsigned HOST_WIDE_INT) arg0 % arg1; break; case AND: val = arg0 & arg1; break; case IOR: val = arg0 | arg1; break; case XOR: val = arg0 ^ arg1; break; case LSHIFTRT: /* If shift count is undefined, don't fold it; let the machine do what it wants. But truncate it if the machine will do that. */ if (arg1 < 0) return 0; #ifdef SHIFT_COUNT_TRUNCATED if (SHIFT_COUNT_TRUNCATED) arg1 %= width; #endif val = ((unsigned HOST_WIDE_INT) arg0) >> arg1; break; case ASHIFT: if (arg1 < 0) return 0; #ifdef SHIFT_COUNT_TRUNCATED if (SHIFT_COUNT_TRUNCATED) arg1 %= width; #endif val = ((unsigned HOST_WIDE_INT) arg0) << arg1; break; case ASHIFTRT: if (arg1 < 0) return 0; #ifdef SHIFT_COUNT_TRUNCATED if (SHIFT_COUNT_TRUNCATED) arg1 %= width; #endif val = arg0s >> arg1; /* Bootstrap compiler may not have sign extended the right shift. Manually extend the sign to insure bootstrap cc matches gcc. */ if (arg0s < 0 && arg1 > 0) val |= ((HOST_WIDE_INT) -1) << (HOST_BITS_PER_WIDE_INT - arg1); break; case ROTATERT: if (arg1 < 0) return 0; arg1 %= width; val = ((((unsigned HOST_WIDE_INT) arg0) << (width - arg1)) | (((unsigned HOST_WIDE_INT) arg0) >> arg1)); break; case ROTATE: if (arg1 < 0) return 0; arg1 %= width; val = ((((unsigned HOST_WIDE_INT) arg0) << arg1) | (((unsigned HOST_WIDE_INT) arg0) >> (width - arg1))); break; case COMPARE: /* Do nothing here. */ return 0; case SMIN: val = arg0s <= arg1s ? arg0s : arg1s; break; case UMIN: val = ((unsigned HOST_WIDE_INT) arg0 <= (unsigned HOST_WIDE_INT) arg1 ? arg0 : arg1); break; case SMAX: val = arg0s > arg1s ? arg0s : arg1s; break; case UMAX: val = ((unsigned HOST_WIDE_INT) arg0 > (unsigned HOST_WIDE_INT) arg1 ? arg0 : arg1); break; default: abort (); } val = trunc_int_for_mode (val, mode); return GEN_INT (val); } /* Simplify a PLUS or MINUS, at least one of whose operands may be another PLUS or MINUS. Rather than test for specific case, we do this by a brute-force method and do all possible simplifications until no more changes occur. Then we rebuild the operation. */ static rtx simplify_plus_minus (code, mode, op0, op1) enum rtx_code code; enum machine_mode mode; rtx op0, op1; { rtx ops[8]; int negs[8]; rtx result, tem; int n_ops = 2, input_ops = 2, input_consts = 0, n_consts = 0; int first = 1, negate = 0, changed; int i, j; memset ((char *) ops, 0, sizeof ops); /* Set up the two operands and then expand them until nothing has been changed. If we run out of room in our array, give up; this should almost never happen. */ ops[0] = op0, ops[1] = op1, negs[0] = 0, negs[1] = (code == MINUS); changed = 1; while (changed) { changed = 0; for (i = 0; i < n_ops; i++) switch (GET_CODE (ops[i])) { case PLUS: case MINUS: if (n_ops == 7) return 0; ops[n_ops] = XEXP (ops[i], 1); negs[n_ops++] = GET_CODE (ops[i]) == MINUS ? !negs[i] : negs[i]; ops[i] = XEXP (ops[i], 0); input_ops++; changed = 1; break; case NEG: ops[i] = XEXP (ops[i], 0); negs[i] = ! negs[i]; changed = 1; break; case CONST: ops[i] = XEXP (ops[i], 0); input_consts++; changed = 1; break; case NOT: /* ~a -> (-a - 1) */ if (n_ops != 7) { ops[n_ops] = constm1_rtx; negs[n_ops++] = negs[i]; ops[i] = XEXP (ops[i], 0); negs[i] = ! negs[i]; changed = 1; } break; case CONST_INT: if (negs[i]) ops[i] = GEN_INT (- INTVAL (ops[i])), negs[i] = 0, changed = 1; break; default: break; } } /* If we only have two operands, we can't do anything. */ if (n_ops <= 2) return 0; /* Now simplify each pair of operands until nothing changes. The first time through just simplify constants against each other. */ changed = 1; while (changed) { changed = first; for (i = 0; i < n_ops - 1; i++) for (j = i + 1; j < n_ops; j++) if (ops[i] != 0 && ops[j] != 0 && (! first || (CONSTANT_P (ops[i]) && CONSTANT_P (ops[j])))) { rtx lhs = ops[i], rhs = ops[j]; enum rtx_code ncode = PLUS; if (negs[i] && ! negs[j]) lhs = ops[j], rhs = ops[i], ncode = MINUS; else if (! negs[i] && negs[j]) ncode = MINUS; tem = simplify_binary_operation (ncode, mode, lhs, rhs); if (tem) { ops[i] = tem, ops[j] = 0; negs[i] = negs[i] && negs[j]; if (GET_CODE (tem) == NEG) ops[i] = XEXP (tem, 0), negs[i] = ! negs[i]; if (GET_CODE (ops[i]) == CONST_INT && negs[i]) ops[i] = GEN_INT (- INTVAL (ops[i])), negs[i] = 0; changed = 1; } } first = 0; } /* Pack all the operands to the lower-numbered entries and give up if we didn't reduce the number of operands we had. Make sure we count a CONST as two operands. If we have the same number of operands, but have made more CONSTs than we had, this is also an improvement, so accept it. */ for (i = 0, j = 0; j < n_ops; j++) if (ops[j] != 0) { ops[i] = ops[j], negs[i++] = negs[j]; if (GET_CODE (ops[j]) == CONST) n_consts++; } if (i + n_consts > input_ops || (i + n_consts == input_ops && n_consts <= input_consts)) return 0; n_ops = i; /* If we have a CONST_INT, put it last. */ for (i = 0; i < n_ops - 1; i++) if (GET_CODE (ops[i]) == CONST_INT) { tem = ops[n_ops - 1], ops[n_ops - 1] = ops[i] , ops[i] = tem; j = negs[n_ops - 1], negs[n_ops - 1] = negs[i], negs[i] = j; } /* Put a non-negated operand first. If there aren't any, make all operands positive and negate the whole thing later. */ for (i = 0; i < n_ops && negs[i]; i++) ; if (i == n_ops) { for (i = 0; i < n_ops; i++) negs[i] = 0; negate = 1; } else if (i != 0) { tem = ops[0], ops[0] = ops[i], ops[i] = tem; j = negs[0], negs[0] = negs[i], negs[i] = j; } /* Now make the result by performing the requested operations. */ result = ops[0]; for (i = 1; i < n_ops; i++) result = simplify_gen_binary (negs[i] ? MINUS : PLUS, mode, result, ops[i]); return negate ? gen_rtx_NEG (mode, result) : result; } struct cfc_args { rtx op0, op1; /* Input */ int equal, op0lt, op1lt; /* Output */ int unordered; }; static void check_fold_consts (data) PTR data; { struct cfc_args *args = (struct cfc_args *) data; REAL_VALUE_TYPE d0, d1; /* We may possibly raise an exception while reading the value. */ args->unordered = 1; REAL_VALUE_FROM_CONST_DOUBLE (d0, args->op0); REAL_VALUE_FROM_CONST_DOUBLE (d1, args->op1); /* Comparisons of Inf versus Inf are ordered. */ if (REAL_VALUE_ISNAN (d0) || REAL_VALUE_ISNAN (d1)) return; args->equal = REAL_VALUES_EQUAL (d0, d1); args->op0lt = REAL_VALUES_LESS (d0, d1); args->op1lt = REAL_VALUES_LESS (d1, d0); args->unordered = 0; } /* Like simplify_binary_operation except used for relational operators. MODE is the mode of the operands, not that of the result. If MODE is VOIDmode, both operands must also be VOIDmode and we compare the operands in "infinite precision". If no simplification is possible, this function returns zero. Otherwise, it returns either const_true_rtx or const0_rtx. */ rtx simplify_relational_operation (code, mode, op0, op1) enum rtx_code code; enum machine_mode mode; rtx op0, op1; { int equal, op0lt, op0ltu, op1lt, op1ltu; rtx tem; if (mode == VOIDmode && (GET_MODE (op0) != VOIDmode || GET_MODE (op1) != VOIDmode)) abort (); /* If op0 is a compare, extract the comparison arguments from it. */ if (GET_CODE (op0) == COMPARE && op1 == const0_rtx) op1 = XEXP (op0, 1), op0 = XEXP (op0, 0); /* We can't simplify MODE_CC values since we don't know what the actual comparison is. */ if (GET_MODE_CLASS (GET_MODE (op0)) == MODE_CC #ifdef HAVE_cc0 || op0 == cc0_rtx #endif ) return 0; /* Make sure the constant is second. */ if ((CONSTANT_P (op0) && ! CONSTANT_P (op1)) || (GET_CODE (op0) == CONST_INT && GET_CODE (op1) != CONST_INT)) { tem = op0, op0 = op1, op1 = tem; code = swap_condition (code); } /* For integer comparisons of A and B maybe we can simplify A - B and can then simplify a comparison of that with zero. If A and B are both either a register or a CONST_INT, this can't help; testing for these cases will prevent infinite recursion here and speed things up. If CODE is an unsigned comparison, then we can never do this optimization, because it gives an incorrect result if the subtraction wraps around zero. ANSI C defines unsigned operations such that they never overflow, and thus such cases can not be ignored. */ if (INTEGRAL_MODE_P (mode) && op1 != const0_rtx && ! ((GET_CODE (op0) == REG || GET_CODE (op0) == CONST_INT) && (GET_CODE (op1) == REG || GET_CODE (op1) == CONST_INT)) && 0 != (tem = simplify_binary_operation (MINUS, mode, op0, op1)) && code != GTU && code != GEU && code != LTU && code != LEU) return simplify_relational_operation (signed_condition (code), mode, tem, const0_rtx); if (flag_unsafe_math_optimizations && code == ORDERED) return const_true_rtx; if (flag_unsafe_math_optimizations && code == UNORDERED) return const0_rtx; /* For non-IEEE floating-point, if the two operands are equal, we know the result. */ if (rtx_equal_p (op0, op1) && (TARGET_FLOAT_FORMAT != IEEE_FLOAT_FORMAT || ! FLOAT_MODE_P (GET_MODE (op0)) || flag_unsafe_math_optimizations)) equal = 1, op0lt = 0, op0ltu = 0, op1lt = 0, op1ltu = 0; /* If the operands are floating-point constants, see if we can fold the result. */ #if ! defined (REAL_IS_NOT_DOUBLE) || defined (REAL_ARITHMETIC) else if (GET_CODE (op0) == CONST_DOUBLE && GET_CODE (op1) == CONST_DOUBLE && GET_MODE_CLASS (GET_MODE (op0)) == MODE_FLOAT) { struct cfc_args args; /* Setup input for check_fold_consts() */ args.op0 = op0; args.op1 = op1; if (!do_float_handler (check_fold_consts, (PTR) &args)) args.unordered = 1; if (args.unordered) switch (code) { case UNEQ: case UNLT: case UNGT: case UNLE: case UNGE: case NE: case UNORDERED: return const_true_rtx; case EQ: case LT: case GT: case LE: case GE: case LTGT: case ORDERED: return const0_rtx; default: return 0; } /* Receive output from check_fold_consts() */ equal = args.equal; op0lt = op0ltu = args.op0lt; op1lt = op1ltu = args.op1lt; } #endif /* not REAL_IS_NOT_DOUBLE, or REAL_ARITHMETIC */ /* Otherwise, see if the operands are both integers. */ else if ((GET_MODE_CLASS (mode) == MODE_INT || mode == VOIDmode) && (GET_CODE (op0) == CONST_DOUBLE || GET_CODE (op0) == CONST_INT) && (GET_CODE (op1) == CONST_DOUBLE || GET_CODE (op1) == CONST_INT)) { int width = GET_MODE_BITSIZE (mode); HOST_WIDE_INT l0s, h0s, l1s, h1s; unsigned HOST_WIDE_INT l0u, h0u, l1u, h1u; /* Get the two words comprising each integer constant. */ if (GET_CODE (op0) == CONST_DOUBLE) { l0u = l0s = CONST_DOUBLE_LOW (op0); h0u = h0s = CONST_DOUBLE_HIGH (op0); } else { l0u = l0s = INTVAL (op0); h0u = h0s = HWI_SIGN_EXTEND (l0s); } if (GET_CODE (op1) == CONST_DOUBLE) { l1u = l1s = CONST_DOUBLE_LOW (op1); h1u = h1s = CONST_DOUBLE_HIGH (op1); } else { l1u = l1s = INTVAL (op1); h1u = h1s = HWI_SIGN_EXTEND (l1s); } /* If WIDTH is nonzero and smaller than HOST_BITS_PER_WIDE_INT, we have to sign or zero-extend the values. */ if (width != 0 && width < HOST_BITS_PER_WIDE_INT) { l0u &= ((HOST_WIDE_INT) 1 << width) - 1; l1u &= ((HOST_WIDE_INT) 1 << width) - 1; if (l0s & ((HOST_WIDE_INT) 1 << (width - 1))) l0s |= ((HOST_WIDE_INT) (-1) << width); if (l1s & ((HOST_WIDE_INT) 1 << (width - 1))) l1s |= ((HOST_WIDE_INT) (-1) << width); } if (width != 0 && width <= HOST_BITS_PER_WIDE_INT) h0u = h1u = 0, h0s = HWI_SIGN_EXTEND (l0s), h1s = HWI_SIGN_EXTEND (l1s); equal = (h0u == h1u && l0u == l1u); op0lt = (h0s < h1s || (h0s == h1s && l0u < l1u)); op1lt = (h1s < h0s || (h1s == h0s && l1u < l0u)); op0ltu = (h0u < h1u || (h0u == h1u && l0u < l1u)); op1ltu = (h1u < h0u || (h1u == h0u && l1u < l0u)); } /* Otherwise, there are some code-specific tests we can make. */ else { switch (code) { case EQ: /* References to the frame plus a constant or labels cannot be zero, but a SYMBOL_REF can due to #pragma weak. */ if (((NONZERO_BASE_PLUS_P (op0) && op1 == const0_rtx) || GET_CODE (op0) == LABEL_REF) #if FRAME_POINTER_REGNUM != ARG_POINTER_REGNUM /* On some machines, the ap reg can be 0 sometimes. */ && op0 != arg_pointer_rtx #endif ) return const0_rtx; break; case NE: if (((NONZERO_BASE_PLUS_P (op0) && op1 == const0_rtx) || GET_CODE (op0) == LABEL_REF) #if FRAME_POINTER_REGNUM != ARG_POINTER_REGNUM && op0 != arg_pointer_rtx #endif ) return const_true_rtx; break; case GEU: /* Unsigned values are never negative. */ if (op1 == const0_rtx) return const_true_rtx; break; case LTU: if (op1 == const0_rtx) return const0_rtx; break; case LEU: /* Unsigned values are never greater than the largest unsigned value. */ if (GET_CODE (op1) == CONST_INT && (unsigned HOST_WIDE_INT) INTVAL (op1) == GET_MODE_MASK (mode) && INTEGRAL_MODE_P (mode)) return const_true_rtx; break; case GTU: if (GET_CODE (op1) == CONST_INT && (unsigned HOST_WIDE_INT) INTVAL (op1) == GET_MODE_MASK (mode) && INTEGRAL_MODE_P (mode)) return const0_rtx; break; default: break; } return 0; } /* If we reach here, EQUAL, OP0LT, OP0LTU, OP1LT, and OP1LTU are set as appropriate. */ switch (code) { case EQ: case UNEQ: return equal ? const_true_rtx : const0_rtx; case NE: case LTGT: return ! equal ? const_true_rtx : const0_rtx; case LT: case UNLT: return op0lt ? const_true_rtx : const0_rtx; case GT: case UNGT: return op1lt ? const_true_rtx : const0_rtx; case LTU: return op0ltu ? const_true_rtx : const0_rtx; case GTU: return op1ltu ? const_true_rtx : const0_rtx; case LE: case UNLE: return equal || op0lt ? const_true_rtx : const0_rtx; case GE: case UNGE: return equal || op1lt ? const_true_rtx : const0_rtx; case LEU: return equal || op0ltu ? const_true_rtx : const0_rtx; case GEU: return equal || op1ltu ? const_true_rtx : const0_rtx; case ORDERED: return const_true_rtx; case UNORDERED: return const0_rtx; default: abort (); } } /* Simplify CODE, an operation with result mode MODE and three operands, OP0, OP1, and OP2. OP0_MODE was the mode of OP0 before it became a constant. Return 0 if no simplifications is possible. */ rtx simplify_ternary_operation (code, mode, op0_mode, op0, op1, op2) enum rtx_code code; enum machine_mode mode, op0_mode; rtx op0, op1, op2; { unsigned int width = GET_MODE_BITSIZE (mode); /* VOIDmode means "infinite" precision. */ if (width == 0) width = HOST_BITS_PER_WIDE_INT; switch (code) { case SIGN_EXTRACT: case ZERO_EXTRACT: if (GET_CODE (op0) == CONST_INT && GET_CODE (op1) == CONST_INT && GET_CODE (op2) == CONST_INT && ((unsigned) INTVAL (op1) + (unsigned) INTVAL (op2) <= width) && width <= (unsigned) HOST_BITS_PER_WIDE_INT) { /* Extracting a bit-field from a constant */ HOST_WIDE_INT val = INTVAL (op0); if (BITS_BIG_ENDIAN) val >>= (GET_MODE_BITSIZE (op0_mode) - INTVAL (op2) - INTVAL (op1)); else val >>= INTVAL (op2); if (HOST_BITS_PER_WIDE_INT != INTVAL (op1)) { /* First zero-extend. */ val &= ((HOST_WIDE_INT) 1 << INTVAL (op1)) - 1; /* If desired, propagate sign bit. */ if (code == SIGN_EXTRACT && (val & ((HOST_WIDE_INT) 1 << (INTVAL (op1) - 1)))) val |= ~ (((HOST_WIDE_INT) 1 << INTVAL (op1)) - 1); } /* Clear the bits that don't belong in our mode, unless they and our sign bit are all one. So we get either a reasonable negative value or a reasonable unsigned value for this mode. */ if (width < HOST_BITS_PER_WIDE_INT && ((val & ((HOST_WIDE_INT) (-1) << (width - 1))) != ((HOST_WIDE_INT) (-1) << (width - 1)))) val &= ((HOST_WIDE_INT) 1 << width) - 1; return GEN_INT (val); } break; case IF_THEN_ELSE: if (GET_CODE (op0) == CONST_INT) return op0 != const0_rtx ? op1 : op2; /* Convert a == b ? b : a to "a". */ if (GET_CODE (op0) == NE && ! side_effects_p (op0) && (! FLOAT_MODE_P (mode) || flag_unsafe_math_optimizations) && rtx_equal_p (XEXP (op0, 0), op1) && rtx_equal_p (XEXP (op0, 1), op2)) return op1; else if (GET_CODE (op0) == EQ && ! side_effects_p (op0) && (! FLOAT_MODE_P (mode) || flag_unsafe_math_optimizations) && rtx_equal_p (XEXP (op0, 1), op1) && rtx_equal_p (XEXP (op0, 0), op2)) return op2; else if (GET_RTX_CLASS (GET_CODE (op0)) == '<' && ! side_effects_p (op0)) { enum machine_mode cmp_mode = (GET_MODE (XEXP (op0, 0)) == VOIDmode ? GET_MODE (XEXP (op0, 1)) : GET_MODE (XEXP (op0, 0))); rtx temp; if (cmp_mode == VOIDmode) cmp_mode = op0_mode; temp = simplify_relational_operation (GET_CODE (op0), cmp_mode, XEXP (op0, 0), XEXP (op0, 1)); /* See if any simplifications were possible. */ if (temp == const0_rtx) return op2; else if (temp == const1_rtx) return op1; else if (temp) op0 = temp; /* Look for happy constants in op1 and op2. */ if (GET_CODE (op1) == CONST_INT && GET_CODE (op2) == CONST_INT) { HOST_WIDE_INT t = INTVAL (op1); HOST_WIDE_INT f = INTVAL (op2); if (t == STORE_FLAG_VALUE && f == 0) code = GET_CODE (op0); else if (t == 0 && f == STORE_FLAG_VALUE) { enum rtx_code tmp; tmp = reversed_comparison_code (op0, NULL_RTX); if (tmp == UNKNOWN) break; code = tmp; } else break; return gen_rtx_fmt_ee (code, mode, XEXP (op0, 0), XEXP (op0, 1)); } } break; default: abort (); } return 0; } /* Simplify X, an rtx expression. Return the simplified expression or NULL if no simplifications were possible. This is the preferred entry point into the simplification routines; however, we still allow passes to call the more specific routines. Right now GCC has three (yes, three) major bodies of RTL simplficiation code that need to be unified. 1. fold_rtx in cse.c. This code uses various CSE specific information to aid in RTL simplification. 2. simplify_rtx in combine.c. Similar to fold_rtx, except that it uses combine specific information to aid in RTL simplification. 3. The routines in this file. Long term we want to only have one body of simplification code; to get to that state I recommend the following steps: 1. Pour over fold_rtx & simplify_rtx and move any simplifications which are not pass dependent state into these routines. 2. As code is moved by #1, change fold_rtx & simplify_rtx to use this routine whenever possible. 3. Allow for pass dependent state to be provided to these routines and add simplifications based on the pass dependent state. Remove code from cse.c & combine.c that becomes redundant/dead. It will take time, but ultimately the compiler will be easier to maintain and improve. It's totally silly that when we add a simplification that it needs to be added to 4 places (3 for RTL simplification and 1 for tree simplification. */ rtx simplify_rtx (x) rtx x; { enum rtx_code code = GET_CODE (x); enum machine_mode mode = GET_MODE (x); switch (GET_RTX_CLASS (code)) { case '1': return simplify_unary_operation (code, mode, XEXP (x, 0), GET_MODE (XEXP (x, 0))); case '2': case 'c': return simplify_binary_operation (code, mode, XEXP (x, 0), XEXP (x, 1)); case '3': case 'b': return simplify_ternary_operation (code, mode, GET_MODE (XEXP (x, 0)), XEXP (x, 0), XEXP (x, 1), XEXP (x, 2)); case '<': return simplify_relational_operation (code, ((GET_MODE (XEXP (x, 0)) != VOIDmode) ? GET_MODE (XEXP (x, 0)) : GET_MODE (XEXP (x, 1))), XEXP (x, 0), XEXP (x, 1)); default: return NULL; } }