/* Compute register class preferences for pseudo-registers. Copyright (C) 1987, 1988, 1991, 1992, 1993, 1994, 1995, 1996 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc. This file is part of GNU CC. GNU CC is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. GNU CC is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GNU CC; see the file COPYING. If not, write to the Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* This file contains two passes of the compiler: reg_scan and reg_class. It also defines some tables of information about the hardware registers and a function init_reg_sets to initialize the tables. */ #include "config.h" #include "system.h" #include "rtl.h" #include "expr.h" #include "tm_p.h" #include "hard-reg-set.h" #include "flags.h" #include "basic-block.h" #include "regs.h" #include "function.h" #include "insn-config.h" #include "recog.h" #include "reload.h" #include "real.h" #include "toplev.h" #include "output.h" #include "ggc.h" #ifndef REGISTER_MOVE_COST #define REGISTER_MOVE_COST(m, x, y) 2 #endif static void init_reg_sets_1 PARAMS ((void)); static void init_reg_modes PARAMS ((void)); /* If we have auto-increment or auto-decrement and we can have secondary reloads, we are not allowed to use classes requiring secondary reloads for pseudos auto-incremented since reload can't handle it. */ #ifdef AUTO_INC_DEC #if defined(SECONDARY_INPUT_RELOAD_CLASS) || defined(SECONDARY_OUTPUT_RELOAD_CLASS) #define FORBIDDEN_INC_DEC_CLASSES #endif #endif /* Register tables used by many passes. */ /* Indexed by hard register number, contains 1 for registers that are fixed use (stack pointer, pc, frame pointer, etc.). These are the registers that cannot be used to allocate a pseudo reg for general use. */ char fixed_regs[FIRST_PSEUDO_REGISTER]; /* Same info as a HARD_REG_SET. */ HARD_REG_SET fixed_reg_set; /* Data for initializing the above. */ static char initial_fixed_regs[] = FIXED_REGISTERS; /* Indexed by hard register number, contains 1 for registers that are fixed use or are clobbered by function calls. These are the registers that cannot be used to allocate a pseudo reg whose life crosses calls unless we are able to save/restore them across the calls. */ char call_used_regs[FIRST_PSEUDO_REGISTER]; /* Same info as a HARD_REG_SET. */ HARD_REG_SET call_used_reg_set; /* HARD_REG_SET of registers we want to avoid caller saving. */ HARD_REG_SET losing_caller_save_reg_set; /* Data for initializing the above. */ static char initial_call_used_regs[] = CALL_USED_REGISTERS; /* Indexed by hard register number, contains 1 for registers that are fixed use or call used registers that cannot hold quantities across calls even if we are willing to save and restore them. call fixed registers are a subset of call used registers. */ char call_fixed_regs[FIRST_PSEUDO_REGISTER]; /* The same info as a HARD_REG_SET. */ HARD_REG_SET call_fixed_reg_set; /* Number of non-fixed registers. */ int n_non_fixed_regs; /* Indexed by hard register number, contains 1 for registers that are being used for global register decls. These must be exempt from ordinary flow analysis and are also considered fixed. */ char global_regs[FIRST_PSEUDO_REGISTER]; /* Table of register numbers in the order in which to try to use them. */ #ifdef REG_ALLOC_ORDER int reg_alloc_order[FIRST_PSEUDO_REGISTER] = REG_ALLOC_ORDER; /* The inverse of reg_alloc_order. */ int inv_reg_alloc_order[FIRST_PSEUDO_REGISTER]; #endif /* For each reg class, a HARD_REG_SET saying which registers are in it. */ HARD_REG_SET reg_class_contents[N_REG_CLASSES]; /* The same information, but as an array of unsigned ints. We copy from these unsigned ints to the table above. We do this so the tm.h files do not have to be aware of the wordsize for machines with <= 64 regs. */ #define N_REG_INTS \ ((FIRST_PSEUDO_REGISTER + (HOST_BITS_PER_INT - 1)) / HOST_BITS_PER_INT) static unsigned int_reg_class_contents[N_REG_CLASSES][N_REG_INTS] = REG_CLASS_CONTENTS; /* For each reg class, number of regs it contains. */ unsigned int reg_class_size[N_REG_CLASSES]; /* For each reg class, table listing all the containing classes. */ enum reg_class reg_class_superclasses[N_REG_CLASSES][N_REG_CLASSES]; /* For each reg class, table listing all the classes contained in it. */ enum reg_class reg_class_subclasses[N_REG_CLASSES][N_REG_CLASSES]; /* For each pair of reg classes, a largest reg class contained in their union. */ enum reg_class reg_class_subunion[N_REG_CLASSES][N_REG_CLASSES]; /* For each pair of reg classes, the smallest reg class containing their union. */ enum reg_class reg_class_superunion[N_REG_CLASSES][N_REG_CLASSES]; /* Array containing all of the register names. Unless DEBUG_REGISTER_NAMES is defined, use the copy in print-rtl.c. */ #ifdef DEBUG_REGISTER_NAMES const char * reg_names[] = REGISTER_NAMES; #endif /* For each hard register, the widest mode object that it can contain. This will be a MODE_INT mode if the register can hold integers. Otherwise it will be a MODE_FLOAT or a MODE_CC mode, whichever is valid for the register. */ enum machine_mode reg_raw_mode[FIRST_PSEUDO_REGISTER]; /* 1 if class does contain register of given mode. */ static char contains_reg_of_mode [N_REG_CLASSES] [MAX_MACHINE_MODE]; /* Maximum cost of moving from a register in one class to a register in another class. Based on REGISTER_MOVE_COST. */ static int move_cost[MAX_MACHINE_MODE][N_REG_CLASSES][N_REG_CLASSES]; /* Similar, but here we don't have to move if the first index is a subset of the second so in that case the cost is zero. */ static int may_move_in_cost[MAX_MACHINE_MODE][N_REG_CLASSES][N_REG_CLASSES]; /* Similar, but here we don't have to move if the first index is a superset of the second so in that case the cost is zero. */ static int may_move_out_cost[MAX_MACHINE_MODE][N_REG_CLASSES][N_REG_CLASSES]; #ifdef FORBIDDEN_INC_DEC_CLASSES /* These are the classes that regs which are auto-incremented or decremented cannot be put in. */ static int forbidden_inc_dec_class[N_REG_CLASSES]; /* Indexed by n, is non-zero if (REG n) is used in an auto-inc or auto-dec context. */ static char *in_inc_dec; #endif /* FORBIDDEN_INC_DEC_CLASSES */ #ifdef CLASS_CANNOT_CHANGE_MODE /* These are the classes containing only registers that can be used in a SUBREG expression that changes the mode of the register in some way that is illegal. */ static int class_can_change_mode[N_REG_CLASSES]; /* Registers, including pseudos, which change modes in some way that is illegal. */ static regset reg_changes_mode; #endif /* CLASS_CANNOT_CHANGE_MODE */ #ifdef HAVE_SECONDARY_RELOADS /* Sample MEM values for use by memory_move_secondary_cost. */ static rtx top_of_stack[MAX_MACHINE_MODE]; #endif /* HAVE_SECONDARY_RELOADS */ /* Linked list of reg_info structures allocated for reg_n_info array. Grouping all of the allocated structures together in one lump means only one call to bzero to clear them, rather than n smaller calls. */ struct reg_info_data { struct reg_info_data *next; /* next set of reg_info structures */ size_t min_index; /* minimum index # */ size_t max_index; /* maximum index # */ char used_p; /* non-zero if this has been used previously */ reg_info data[1]; /* beginning of the reg_info data */ }; static struct reg_info_data *reg_info_head; /* No more global register variables may be declared; true once regclass has been initialized. */ static int no_global_reg_vars = 0; /* Function called only once to initialize the above data on reg usage. Once this is done, various switches may override. */ void init_reg_sets () { register int i, j; /* First copy the register information from the initial int form into the regsets. */ for (i = 0; i < N_REG_CLASSES; i++) { CLEAR_HARD_REG_SET (reg_class_contents[i]); for (j = 0; j < FIRST_PSEUDO_REGISTER; j++) if (int_reg_class_contents[i][j / HOST_BITS_PER_INT] & ((unsigned) 1 << (j % HOST_BITS_PER_INT))) SET_HARD_REG_BIT (reg_class_contents[i], j); } memcpy (fixed_regs, initial_fixed_regs, sizeof fixed_regs); memcpy (call_used_regs, initial_call_used_regs, sizeof call_used_regs); memset (global_regs, 0, sizeof global_regs); /* Do any additional initialization regsets may need */ INIT_ONCE_REG_SET (); #ifdef REG_ALLOC_ORDER for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) inv_reg_alloc_order[reg_alloc_order[i]] = i; #endif } /* After switches have been processed, which perhaps alter `fixed_regs' and `call_used_regs', convert them to HARD_REG_SETs. */ static void init_reg_sets_1 () { register unsigned int i, j; register unsigned int /* enum machine_mode */ m; char allocatable_regs_of_mode [MAX_MACHINE_MODE]; /* This macro allows the fixed or call-used registers and the register classes to depend on target flags. */ #ifdef CONDITIONAL_REGISTER_USAGE CONDITIONAL_REGISTER_USAGE; #endif /* Compute number of hard regs in each class. */ memset ((char *) reg_class_size, 0, sizeof reg_class_size); for (i = 0; i < N_REG_CLASSES; i++) for (j = 0; j < FIRST_PSEUDO_REGISTER; j++) if (TEST_HARD_REG_BIT (reg_class_contents[i], j)) reg_class_size[i]++; /* Initialize the table of subunions. reg_class_subunion[I][J] gets the largest-numbered reg-class that is contained in the union of classes I and J. */ for (i = 0; i < N_REG_CLASSES; i++) { for (j = 0; j < N_REG_CLASSES; j++) { #ifdef HARD_REG_SET register /* Declare it register if it's a scalar. */ #endif HARD_REG_SET c; register int k; COPY_HARD_REG_SET (c, reg_class_contents[i]); IOR_HARD_REG_SET (c, reg_class_contents[j]); for (k = 0; k < N_REG_CLASSES; k++) { GO_IF_HARD_REG_SUBSET (reg_class_contents[k], c, subclass1); continue; subclass1: /* keep the largest subclass */ /* SPEE 900308 */ GO_IF_HARD_REG_SUBSET (reg_class_contents[k], reg_class_contents[(int) reg_class_subunion[i][j]], subclass2); reg_class_subunion[i][j] = (enum reg_class) k; subclass2: ; } } } /* Initialize the table of superunions. reg_class_superunion[I][J] gets the smallest-numbered reg-class containing the union of classes I and J. */ for (i = 0; i < N_REG_CLASSES; i++) { for (j = 0; j < N_REG_CLASSES; j++) { #ifdef HARD_REG_SET register /* Declare it register if it's a scalar. */ #endif HARD_REG_SET c; register int k; COPY_HARD_REG_SET (c, reg_class_contents[i]); IOR_HARD_REG_SET (c, reg_class_contents[j]); for (k = 0; k < N_REG_CLASSES; k++) GO_IF_HARD_REG_SUBSET (c, reg_class_contents[k], superclass); superclass: reg_class_superunion[i][j] = (enum reg_class) k; } } /* Initialize the tables of subclasses and superclasses of each reg class. First clear the whole table, then add the elements as they are found. */ for (i = 0; i < N_REG_CLASSES; i++) { for (j = 0; j < N_REG_CLASSES; j++) { reg_class_superclasses[i][j] = LIM_REG_CLASSES; reg_class_subclasses[i][j] = LIM_REG_CLASSES; } } for (i = 0; i < N_REG_CLASSES; i++) { if (i == (int) NO_REGS) continue; for (j = i + 1; j < N_REG_CLASSES; j++) { enum reg_class *p; GO_IF_HARD_REG_SUBSET (reg_class_contents[i], reg_class_contents[j], subclass); continue; subclass: /* Reg class I is a subclass of J. Add J to the table of superclasses of I. */ p = ®_class_superclasses[i][0]; while (*p != LIM_REG_CLASSES) p++; *p = (enum reg_class) j; /* Add I to the table of superclasses of J. */ p = ®_class_subclasses[j][0]; while (*p != LIM_REG_CLASSES) p++; *p = (enum reg_class) i; } } /* Initialize "constant" tables. */ CLEAR_HARD_REG_SET (fixed_reg_set); CLEAR_HARD_REG_SET (call_used_reg_set); CLEAR_HARD_REG_SET (call_fixed_reg_set); memcpy (call_fixed_regs, fixed_regs, sizeof call_fixed_regs); n_non_fixed_regs = 0; for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) { if (fixed_regs[i]) SET_HARD_REG_BIT (fixed_reg_set, i); else n_non_fixed_regs++; if (call_used_regs[i]) SET_HARD_REG_BIT (call_used_reg_set, i); if (call_fixed_regs[i]) SET_HARD_REG_BIT (call_fixed_reg_set, i); if (CLASS_LIKELY_SPILLED_P (REGNO_REG_CLASS (i))) SET_HARD_REG_BIT (losing_caller_save_reg_set, i); } memset (contains_reg_of_mode, 0, sizeof (contains_reg_of_mode)); memset (allocatable_regs_of_mode, 0, sizeof (allocatable_regs_of_mode)); for (m = 0; m < (unsigned int) MAX_MACHINE_MODE; m++) for (i = 0; i < N_REG_CLASSES; i++) if (CLASS_MAX_NREGS (i, m) <= reg_class_size[i]) for (j = 0; j < FIRST_PSEUDO_REGISTER; j++) if (!fixed_regs [j] && TEST_HARD_REG_BIT (reg_class_contents[i], j) && HARD_REGNO_MODE_OK (j, m)) { contains_reg_of_mode [i][m] = 1; allocatable_regs_of_mode [m] = 1; break; } /* Initialize the move cost table. Find every subset of each class and take the maximum cost of moving any subset to any other. */ for (m = 0; m < (unsigned int) MAX_MACHINE_MODE; m++) if (allocatable_regs_of_mode [m]) { for (i = 0; i < N_REG_CLASSES; i++) if (contains_reg_of_mode [i][m]) for (j = 0; j < N_REG_CLASSES; j++) { int cost; enum reg_class *p1, *p2; if (!contains_reg_of_mode [j][m]) { move_cost[m][i][j] = 65536; may_move_in_cost[m][i][j] = 65536; may_move_out_cost[m][i][j] = 65536; } else { cost = i == j ? 2 : REGISTER_MOVE_COST (m, i, j); for (p2 = ®_class_subclasses[j][0]; *p2 != LIM_REG_CLASSES; p2++) if (*p2 != i && contains_reg_of_mode [*p2][m]) cost = MAX (cost, move_cost [m][i][*p2]); for (p1 = ®_class_subclasses[i][0]; *p1 != LIM_REG_CLASSES; p1++) if (*p1 != j && contains_reg_of_mode [*p1][m]) cost = MAX (cost, move_cost [m][*p1][j]); move_cost[m][i][j] = cost; if (reg_class_subset_p (i, j)) may_move_in_cost[m][i][j] = 0; else may_move_in_cost[m][i][j] = cost; if (reg_class_subset_p (j, i)) may_move_out_cost[m][i][j] = 0; else may_move_out_cost[m][i][j] = cost; } } else for (j = 0; j < N_REG_CLASSES; j++) { move_cost[m][i][j] = 65536; may_move_in_cost[m][i][j] = 65536; may_move_out_cost[m][i][j] = 65536; } } #ifdef CLASS_CANNOT_CHANGE_MODE { HARD_REG_SET c; COMPL_HARD_REG_SET (c, reg_class_contents[CLASS_CANNOT_CHANGE_MODE]); for (i = 0; i < N_REG_CLASSES; i++) { GO_IF_HARD_REG_SUBSET (reg_class_contents[i], c, ok_class); class_can_change_mode [i] = 0; continue; ok_class: class_can_change_mode [i] = 1; } } #endif /* CLASS_CANNOT_CHANGE_MODE */ } /* Compute the table of register modes. These values are used to record death information for individual registers (as opposed to a multi-register mode). */ static void init_reg_modes () { register int i; for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) { reg_raw_mode[i] = choose_hard_reg_mode (i, 1); /* If we couldn't find a valid mode, just use the previous mode. ??? One situation in which we need to do this is on the mips where HARD_REGNO_NREGS (fpreg, [SD]Fmode) returns 2. Ideally we'd like to use DF mode for the even registers and VOIDmode for the odd (for the cpu models where the odd ones are inaccessible). */ if (reg_raw_mode[i] == VOIDmode) reg_raw_mode[i] = i == 0 ? word_mode : reg_raw_mode[i-1]; } } /* Finish initializing the register sets and initialize the register modes. */ void init_regs () { /* This finishes what was started by init_reg_sets, but couldn't be done until after register usage was specified. */ init_reg_sets_1 (); init_reg_modes (); #ifdef HAVE_SECONDARY_RELOADS { /* Make some fake stack-frame MEM references for use in memory_move_secondary_cost. */ int i; for (i = 0; i < MAX_MACHINE_MODE; i++) top_of_stack[i] = gen_rtx_MEM (i, stack_pointer_rtx); ggc_add_rtx_root (top_of_stack, MAX_MACHINE_MODE); } #endif } #ifdef HAVE_SECONDARY_RELOADS /* Compute extra cost of moving registers to/from memory due to reloads. Only needed if secondary reloads are required for memory moves. */ int memory_move_secondary_cost (mode, class, in) enum machine_mode mode; enum reg_class class; int in; { enum reg_class altclass; int partial_cost = 0; /* We need a memory reference to feed to SECONDARY... macros. */ /* mem may be unused even if the SECONDARY_ macros are defined. */ rtx mem ATTRIBUTE_UNUSED = top_of_stack[(int) mode]; if (in) { #ifdef SECONDARY_INPUT_RELOAD_CLASS altclass = SECONDARY_INPUT_RELOAD_CLASS (class, mode, mem); #else altclass = NO_REGS; #endif } else { #ifdef SECONDARY_OUTPUT_RELOAD_CLASS altclass = SECONDARY_OUTPUT_RELOAD_CLASS (class, mode, mem); #else altclass = NO_REGS; #endif } if (altclass == NO_REGS) return 0; if (in) partial_cost = REGISTER_MOVE_COST (mode, altclass, class); else partial_cost = REGISTER_MOVE_COST (mode, class, altclass); if (class == altclass) /* This isn't simply a copy-to-temporary situation. Can't guess what it is, so MEMORY_MOVE_COST really ought not to be calling here in that case. I'm tempted to put in an abort here, but returning this will probably only give poor estimates, which is what we would've had before this code anyways. */ return partial_cost; /* Check if the secondary reload register will also need a secondary reload. */ return memory_move_secondary_cost (mode, altclass, in) + partial_cost; } #endif /* Return a machine mode that is legitimate for hard reg REGNO and large enough to save nregs. If we can't find one, return VOIDmode. */ enum machine_mode choose_hard_reg_mode (regno, nregs) unsigned int regno ATTRIBUTE_UNUSED; unsigned int nregs; { unsigned int /* enum machine_mode */ m; enum machine_mode found_mode = VOIDmode, mode; /* We first look for the largest integer mode that can be validly held in REGNO. If none, we look for the largest floating-point mode. If we still didn't find a valid mode, try CCmode. */ for (mode = GET_CLASS_NARROWEST_MODE (MODE_INT); mode != VOIDmode; mode = GET_MODE_WIDER_MODE (mode)) if (HARD_REGNO_NREGS (regno, mode) == nregs && HARD_REGNO_MODE_OK (regno, mode)) found_mode = mode; if (found_mode != VOIDmode) return found_mode; for (mode = GET_CLASS_NARROWEST_MODE (MODE_FLOAT); mode != VOIDmode; mode = GET_MODE_WIDER_MODE (mode)) if (HARD_REGNO_NREGS (regno, mode) == nregs && HARD_REGNO_MODE_OK (regno, mode)) found_mode = mode; if (found_mode != VOIDmode) return found_mode; /* Iterate over all of the CCmodes. */ for (m = (unsigned int) CCmode; m < (unsigned int) NUM_MACHINE_MODES; ++m) { mode = (enum machine_mode) m; if (HARD_REGNO_NREGS (regno, mode) == nregs && HARD_REGNO_MODE_OK (regno, mode)) return mode; } /* We can't find a mode valid for this register. */ return VOIDmode; } /* Specify the usage characteristics of the register named NAME. It should be a fixed register if FIXED and a call-used register if CALL_USED. */ void fix_register (name, fixed, call_used) const char *name; int fixed, call_used; { int i; /* Decode the name and update the primary form of the register info. */ if ((i = decode_reg_name (name)) >= 0) { if ((i == STACK_POINTER_REGNUM #ifdef HARD_FRAME_POINTER_REGNUM || i == HARD_FRAME_POINTER_REGNUM #else || i == FRAME_POINTER_REGNUM #endif ) && (fixed == 0 || call_used == 0)) { static const char * const what_option[2][2] = { { "call-saved", "call-used" }, { "no-such-option", "fixed" }}; error ("can't use '%s' as a %s register", name, what_option[fixed][call_used]); } else { fixed_regs[i] = fixed; call_used_regs[i] = call_used; } } else { warning ("unknown register name: %s", name); } } /* Mark register number I as global. */ void globalize_reg (i) int i; { if (fixed_regs[i] == 0 && no_global_reg_vars) error ("global register variable follows a function definition"); if (global_regs[i]) { warning ("register used for two global register variables"); return; } if (call_used_regs[i] && ! fixed_regs[i]) warning ("call-clobbered register used for global register variable"); global_regs[i] = 1; /* If already fixed, nothing else to do. */ if (fixed_regs[i]) return; fixed_regs[i] = call_used_regs[i] = call_fixed_regs[i] = 1; n_non_fixed_regs--; SET_HARD_REG_BIT (fixed_reg_set, i); SET_HARD_REG_BIT (call_used_reg_set, i); SET_HARD_REG_BIT (call_fixed_reg_set, i); } /* Now the data and code for the `regclass' pass, which happens just before local-alloc. */ /* The `costs' struct records the cost of using a hard register of each class and of using memory for each pseudo. We use this data to set up register class preferences. */ struct costs { int cost[N_REG_CLASSES]; int mem_cost; }; /* Structure used to record preferrences of given pseudo. */ struct reg_pref { /* (enum reg_class) prefclass is the preferred class. */ char prefclass; /* altclass is a register class that we should use for allocating pseudo if no register in the preferred class is available. If no register in this class is available, memory is preferred. It might appear to be more general to have a bitmask of classes here, but since it is recommended that there be a class corresponding to the union of most major pair of classes, that generality is not required. */ char altclass; }; /* Record the cost of each class for each pseudo. */ static struct costs *costs; /* Initialized once, and used to initialize cost values for each insn. */ static struct costs init_cost; /* Record preferrences of each pseudo. This is available after `regclass' is run. */ static struct reg_pref *reg_pref; /* Allocated buffers for reg_pref. */ static struct reg_pref *reg_pref_buffer; /* Account for the fact that insns within a loop are executed very commonly, but don't keep doing this as loops go too deep. */ static int loop_cost; static rtx scan_one_insn PARAMS ((rtx, int)); static void record_operand_costs PARAMS ((rtx, struct costs *, struct reg_pref *)); static void dump_regclass PARAMS ((FILE *)); static void record_reg_classes PARAMS ((int, int, rtx *, enum machine_mode *, const char **, rtx, struct costs *, struct reg_pref *)); static int copy_cost PARAMS ((rtx, enum machine_mode, enum reg_class, int)); static void record_address_regs PARAMS ((rtx, enum reg_class, int)); #ifdef FORBIDDEN_INC_DEC_CLASSES static int auto_inc_dec_reg_p PARAMS ((rtx, enum machine_mode)); #endif static void reg_scan_mark_refs PARAMS ((rtx, rtx, int, unsigned int)); /* Return the reg_class in which pseudo reg number REGNO is best allocated. This function is sometimes called before the info has been computed. When that happens, just return GENERAL_REGS, which is innocuous. */ enum reg_class reg_preferred_class (regno) int regno; { if (reg_pref == 0) return GENERAL_REGS; return (enum reg_class) reg_pref[regno].prefclass; } enum reg_class reg_alternate_class (regno) int regno; { if (reg_pref == 0) return ALL_REGS; return (enum reg_class) reg_pref[regno].altclass; } /* Initialize some global data for this pass. */ void regclass_init () { int i; init_cost.mem_cost = 10000; for (i = 0; i < N_REG_CLASSES; i++) init_cost.cost[i] = 10000; /* This prevents dump_flow_info from losing if called before regclass is run. */ reg_pref = NULL; /* No more global register variables may be declared. */ no_global_reg_vars = 1; } /* Dump register costs. */ static void dump_regclass (dump) FILE *dump; { static const char *const reg_class_names[] = REG_CLASS_NAMES; int i; for (i = FIRST_PSEUDO_REGISTER; i < max_regno; i++) { int /* enum reg_class */ class; if (REG_N_REFS (i)) { fprintf (dump, " Register %i costs:", i); for (class = 0; class < (int) N_REG_CLASSES; class++) if (contains_reg_of_mode [(enum reg_class) class][PSEUDO_REGNO_MODE (i)] #ifdef FORBIDDEN_INC_DEC_CLASSES && (!in_inc_dec[i] || !forbidden_inc_dec_class[(enum reg_class) class]) #endif #ifdef CLASS_CANNOT_CHANGE_MODE && (!REGNO_REG_SET_P (reg_changes_mode, i) || class_can_change_mode [(enum reg_class) class]) #endif ) fprintf (dump, " %s:%i", reg_class_names[class], costs[i].cost[(enum reg_class) class]); fprintf (dump, " MEM:%i\n", costs[i].mem_cost); } } } /* Calculate the costs of insn operands. */ static void record_operand_costs (insn, op_costs, reg_pref) rtx insn; struct costs *op_costs; struct reg_pref *reg_pref; { const char *constraints[MAX_RECOG_OPERANDS]; enum machine_mode modes[MAX_RECOG_OPERANDS]; int i; for (i = 0; i < recog_data.n_operands; i++) { constraints[i] = recog_data.constraints[i]; modes[i] = recog_data.operand_mode[i]; } /* If we get here, we are set up to record the costs of all the operands for this insn. Start by initializing the costs. Then handle any address registers. Finally record the desired classes for any pseudos, doing it twice if some pair of operands are commutative. */ for (i = 0; i < recog_data.n_operands; i++) { op_costs[i] = init_cost; if (GET_CODE (recog_data.operand[i]) == SUBREG) { rtx inner = SUBREG_REG (recog_data.operand[i]); #ifdef CLASS_CANNOT_CHANGE_MODE if (GET_CODE (inner) == REG && CLASS_CANNOT_CHANGE_MODE_P (modes[i], GET_MODE (inner))) SET_REGNO_REG_SET (reg_changes_mode, REGNO (inner)); #endif recog_data.operand[i] = inner; } if (GET_CODE (recog_data.operand[i]) == MEM) record_address_regs (XEXP (recog_data.operand[i], 0), BASE_REG_CLASS, loop_cost * 2); else if (constraints[i][0] == 'p') record_address_regs (recog_data.operand[i], BASE_REG_CLASS, loop_cost * 2); } /* Check for commutative in a separate loop so everything will have been initialized. We must do this even if one operand is a constant--see addsi3 in m68k.md. */ for (i = 0; i < (int) recog_data.n_operands - 1; i++) if (constraints[i][0] == '%') { const char *xconstraints[MAX_RECOG_OPERANDS]; int j; /* Handle commutative operands by swapping the constraints. We assume the modes are the same. */ for (j = 0; j < recog_data.n_operands; j++) xconstraints[j] = constraints[j]; xconstraints[i] = constraints[i+1]; xconstraints[i+1] = constraints[i]; record_reg_classes (recog_data.n_alternatives, recog_data.n_operands, recog_data.operand, modes, xconstraints, insn, op_costs, reg_pref); } record_reg_classes (recog_data.n_alternatives, recog_data.n_operands, recog_data.operand, modes, constraints, insn, op_costs, reg_pref); } /* Subroutine of regclass, processes one insn INSN. Scan it and record each time it would save code to put a certain register in a certain class. PASS, when nonzero, inhibits some optimizations which need only be done once. Return the last insn processed, so that the scan can be continued from there. */ static rtx scan_one_insn (insn, pass) rtx insn; int pass; { enum rtx_code code = GET_CODE (insn); enum rtx_code pat_code; rtx set, note; int i, j; struct costs op_costs[MAX_RECOG_OPERANDS]; if (GET_RTX_CLASS (code) != 'i') return insn; pat_code = GET_CODE (PATTERN (insn)); if (pat_code == USE || pat_code == CLOBBER || pat_code == ASM_INPUT || pat_code == ADDR_VEC || pat_code == ADDR_DIFF_VEC) return insn; set = single_set (insn); extract_insn (insn); /* If this insn loads a parameter from its stack slot, then it represents a savings, rather than a cost, if the parameter is stored in memory. Record this fact. */ if (set != 0 && GET_CODE (SET_DEST (set)) == REG && GET_CODE (SET_SRC (set)) == MEM && (note = find_reg_note (insn, REG_EQUIV, NULL_RTX)) != 0 && GET_CODE (XEXP (note, 0)) == MEM) { costs[REGNO (SET_DEST (set))].mem_cost -= (MEMORY_MOVE_COST (GET_MODE (SET_DEST (set)), GENERAL_REGS, 1) * loop_cost); record_address_regs (XEXP (SET_SRC (set), 0), BASE_REG_CLASS, loop_cost * 2); return insn; } /* Improve handling of two-address insns such as (set X (ashift CONST Y)) where CONST must be made to match X. Change it into two insns: (set X CONST) (set X (ashift X Y)). If we left this for reloading, it would probably get three insns because X and Y might go in the same place. This prevents X and Y from receiving the same hard reg. We can only do this if the modes of operands 0 and 1 (which might not be the same) are tieable and we only need do this during our first pass. */ if (pass == 0 && optimize && recog_data.n_operands >= 3 && recog_data.constraints[1][0] == '0' && recog_data.constraints[1][1] == 0 && CONSTANT_P (recog_data.operand[1]) && ! rtx_equal_p (recog_data.operand[0], recog_data.operand[1]) && ! rtx_equal_p (recog_data.operand[0], recog_data.operand[2]) && GET_CODE (recog_data.operand[0]) == REG && MODES_TIEABLE_P (GET_MODE (recog_data.operand[0]), recog_data.operand_mode[1])) { rtx previnsn = prev_real_insn (insn); rtx dest = gen_lowpart (recog_data.operand_mode[1], recog_data.operand[0]); rtx newinsn = emit_insn_before (gen_move_insn (dest, recog_data.operand[1]), insn); /* If this insn was the start of a basic block, include the new insn in that block. We need not check for code_label here; while a basic block can start with a code_label, INSN could not be at the beginning of that block. */ if (previnsn == 0 || GET_CODE (previnsn) == JUMP_INSN) { int b; for (b = 0; b < n_basic_blocks; b++) if (insn == BLOCK_HEAD (b)) BLOCK_HEAD (b) = newinsn; } /* This makes one more setting of new insns's dest. */ REG_N_SETS (REGNO (recog_data.operand[0]))++; REG_N_REFS (REGNO (recog_data.operand[0]))++; *recog_data.operand_loc[1] = recog_data.operand[0]; REG_N_REFS (REGNO (recog_data.operand[0]))++; for (i = recog_data.n_dups - 1; i >= 0; i--) if (recog_data.dup_num[i] == 1) { *recog_data.dup_loc[i] = recog_data.operand[0]; REG_N_REFS (REGNO (recog_data.operand[0]))++; } return PREV_INSN (newinsn); } record_operand_costs (insn, op_costs, reg_pref); /* Now add the cost for each operand to the total costs for its register. */ for (i = 0; i < recog_data.n_operands; i++) if (GET_CODE (recog_data.operand[i]) == REG && REGNO (recog_data.operand[i]) >= FIRST_PSEUDO_REGISTER) { int regno = REGNO (recog_data.operand[i]); struct costs *p = &costs[regno], *q = &op_costs[i]; p->mem_cost += q->mem_cost * loop_cost; for (j = 0; j < N_REG_CLASSES; j++) p->cost[j] += q->cost[j] * loop_cost; } return insn; } /* This is a pass of the compiler that scans all instructions and calculates the preferred class for each pseudo-register. This information can be accessed later by calling `reg_preferred_class'. This pass comes just before local register allocation. */ void regclass (f, nregs, dump) rtx f; int nregs; FILE *dump; { register rtx insn; register int i; int pass; init_recog (); costs = (struct costs *) xmalloc (nregs * sizeof (struct costs)); #ifdef CLASS_CANNOT_CHANGE_MODE reg_changes_mode = BITMAP_XMALLOC(); #endif #ifdef FORBIDDEN_INC_DEC_CLASSES in_inc_dec = (char *) xmalloc (nregs); /* Initialize information about which register classes can be used for pseudos that are auto-incremented or auto-decremented. It would seem better to put this in init_reg_sets, but we need to be able to allocate rtx, which we can't do that early. */ for (i = 0; i < N_REG_CLASSES; i++) { rtx r = gen_rtx_REG (VOIDmode, 0); enum machine_mode m; register int j; for (j = 0; j < FIRST_PSEUDO_REGISTER; j++) if (TEST_HARD_REG_BIT (reg_class_contents[i], j)) { REGNO (r) = j; for (m = VOIDmode; (int) m < (int) MAX_MACHINE_MODE; m = (enum machine_mode) ((int) m + 1)) if (HARD_REGNO_MODE_OK (j, m)) { PUT_MODE (r, m); /* If a register is not directly suitable for an auto-increment or decrement addressing mode and requires secondary reloads, disallow its class from being used in such addresses. */ if ((0 #ifdef SECONDARY_RELOAD_CLASS || (SECONDARY_RELOAD_CLASS (BASE_REG_CLASS, m, r) != NO_REGS) #else #ifdef SECONDARY_INPUT_RELOAD_CLASS || (SECONDARY_INPUT_RELOAD_CLASS (BASE_REG_CLASS, m, r) != NO_REGS) #endif #ifdef SECONDARY_OUTPUT_RELOAD_CLASS || (SECONDARY_OUTPUT_RELOAD_CLASS (BASE_REG_CLASS, m, r) != NO_REGS) #endif #endif ) && ! auto_inc_dec_reg_p (r, m)) forbidden_inc_dec_class[i] = 1; } } } #endif /* FORBIDDEN_INC_DEC_CLASSES */ /* Normally we scan the insns once and determine the best class to use for each register. However, if -fexpensive_optimizations are on, we do so twice, the second time using the tentative best classes to guide the selection. */ for (pass = 0; pass <= flag_expensive_optimizations; pass++) { int index; if (dump) fprintf (dump, "\n\nPass %i\n\n",pass); /* Zero out our accumulation of the cost of each class for each reg. */ memset ((char *) costs, 0, nregs * sizeof (struct costs)); #ifdef FORBIDDEN_INC_DEC_CLASSES memset (in_inc_dec, 0, nregs); #endif /* Scan the instructions and record each time it would save code to put a certain register in a certain class. */ if (!optimize) { loop_cost = 1; for (insn = f; insn; insn = NEXT_INSN (insn)) insn = scan_one_insn (insn, pass); } else for (index = 0; index < n_basic_blocks; index++) { basic_block bb = BASIC_BLOCK (index); /* Show that an insn inside a loop is likely to be executed three times more than insns outside a loop. This is much more aggressive than the assumptions made elsewhere and is being tried as an experiment. */ if (optimize_size) loop_cost = 1; else loop_cost = 1 << (2 * MIN (bb->loop_depth, 5)); for (insn = bb->head; ; insn = NEXT_INSN (insn)) { insn = scan_one_insn (insn, pass); if (insn == bb->end) break; } } /* Now for each register look at how desirable each class is and find which class is preferred. Store that in `prefclass'. Record in `altclass' the largest register class any of whose registers is better than memory. */ if (pass == 0) reg_pref = reg_pref_buffer; if (dump) { dump_regclass (dump); fprintf (dump,"\n"); } for (i = FIRST_PSEUDO_REGISTER; i < nregs; i++) { register int best_cost = (1 << (HOST_BITS_PER_INT - 2)) - 1; enum reg_class best = ALL_REGS, alt = NO_REGS; /* This is an enum reg_class, but we call it an int to save lots of casts. */ register int class; register struct costs *p = &costs[i]; /* In non-optimizing compilation REG_N_REFS is not initialized yet. */ if (optimize && !REG_N_REFS (i)) continue; for (class = (int) ALL_REGS - 1; class > 0; class--) { /* Ignore classes that are too small for this operand or invalid for a operand that was auto-incremented. */ if (!contains_reg_of_mode [class][PSEUDO_REGNO_MODE (i)] #ifdef FORBIDDEN_INC_DEC_CLASSES || (in_inc_dec[i] && forbidden_inc_dec_class[class]) #endif #ifdef CLASS_CANNOT_CHANGE_MODE || (REGNO_REG_SET_P (reg_changes_mode, i) && ! class_can_change_mode [class]) #endif ) ; else if (p->cost[class] < best_cost) { best_cost = p->cost[class]; best = (enum reg_class) class; } else if (p->cost[class] == best_cost) best = reg_class_subunion[(int)best][class]; } /* Record the alternate register class; i.e., a class for which every register in it is better than using memory. If adding a class would make a smaller class (i.e., no union of just those classes exists), skip that class. The major unions of classes should be provided as a register class. Don't do this if we will be doing it again later. */ if ((pass == 1 || dump) || ! flag_expensive_optimizations) for (class = 0; class < N_REG_CLASSES; class++) if (p->cost[class] < p->mem_cost && (reg_class_size[(int) reg_class_subunion[(int) alt][class]] > reg_class_size[(int) alt]) #ifdef FORBIDDEN_INC_DEC_CLASSES && ! (in_inc_dec[i] && forbidden_inc_dec_class[class]) #endif #ifdef CLASS_CANNOT_CHANGE_MODE && ! (REGNO_REG_SET_P (reg_changes_mode, i) && ! class_can_change_mode [class]) #endif ) alt = reg_class_subunion[(int) alt][class]; /* If we don't add any classes, nothing to try. */ if (alt == best) alt = NO_REGS; if (dump && (reg_pref[i].prefclass != (int) best || reg_pref[i].altclass != (int) alt)) { static const char *const reg_class_names[] = REG_CLASS_NAMES; fprintf (dump, " Register %i", i); if (alt == ALL_REGS || best == ALL_REGS) fprintf (dump, " pref %s\n", reg_class_names[(int) best]); else if (alt == NO_REGS) fprintf (dump, " pref %s or none\n", reg_class_names[(int) best]); else fprintf (dump, " pref %s, else %s\n", reg_class_names[(int) best], reg_class_names[(int) alt]); } /* We cast to (int) because (char) hits bugs in some compilers. */ reg_pref[i].prefclass = (int) best; reg_pref[i].altclass = (int) alt; } } #ifdef FORBIDDEN_INC_DEC_CLASSES free (in_inc_dec); #endif #ifdef CLASS_CANNOT_CHANGE_MODE BITMAP_XFREE (reg_changes_mode); #endif free (costs); } /* Record the cost of using memory or registers of various classes for the operands in INSN. N_ALTS is the number of alternatives. N_OPS is the number of operands. OPS is an array of the operands. MODES are the modes of the operands, in case any are VOIDmode. CONSTRAINTS are the constraints to use for the operands. This array is modified by this procedure. This procedure works alternative by alternative. For each alternative we assume that we will be able to allocate all pseudos to their ideal register class and calculate the cost of using that alternative. Then we compute for each operand that is a pseudo-register, the cost of having the pseudo allocated to each register class and using it in that alternative. To this cost is added the cost of the alternative. The cost of each class for this insn is its lowest cost among all the alternatives. */ static void record_reg_classes (n_alts, n_ops, ops, modes, constraints, insn, op_costs, reg_pref) int n_alts; int n_ops; rtx *ops; enum machine_mode *modes; const char **constraints; rtx insn; struct costs *op_costs; struct reg_pref *reg_pref; { int alt; int i, j; rtx set; /* Process each alternative, each time minimizing an operand's cost with the cost for each operand in that alternative. */ for (alt = 0; alt < n_alts; alt++) { struct costs this_op_costs[MAX_RECOG_OPERANDS]; int alt_fail = 0; int alt_cost = 0; enum reg_class classes[MAX_RECOG_OPERANDS]; int allows_mem[MAX_RECOG_OPERANDS]; int class; for (i = 0; i < n_ops; i++) { const char *p = constraints[i]; rtx op = ops[i]; enum machine_mode mode = modes[i]; int allows_addr = 0; int win = 0; unsigned char c; /* Initially show we know nothing about the register class. */ classes[i] = NO_REGS; allows_mem[i] = 0; /* If this operand has no constraints at all, we can conclude nothing about it since anything is valid. */ if (*p == 0) { if (GET_CODE (op) == REG && REGNO (op) >= FIRST_PSEUDO_REGISTER) memset ((char *) &this_op_costs[i], 0, sizeof this_op_costs[i]); continue; } /* If this alternative is only relevant when this operand matches a previous operand, we do different things depending on whether this operand is a pseudo-reg or not. We must process any modifiers for the operand before we can make this test. */ while (*p == '%' || *p == '=' || *p == '+' || *p == '&') p++; if (p[0] >= '0' && p[0] <= '0' + i && (p[1] == ',' || p[1] == 0)) { /* Copy class and whether memory is allowed from the matching alternative. Then perform any needed cost computations and/or adjustments. */ j = p[0] - '0'; classes[i] = classes[j]; allows_mem[i] = allows_mem[j]; if (GET_CODE (op) != REG || REGNO (op) < FIRST_PSEUDO_REGISTER) { /* If this matches the other operand, we have no added cost and we win. */ if (rtx_equal_p (ops[j], op)) win = 1; /* If we can put the other operand into a register, add to the cost of this alternative the cost to copy this operand to the register used for the other operand. */ else if (classes[j] != NO_REGS) alt_cost += copy_cost (op, mode, classes[j], 1), win = 1; } else if (GET_CODE (ops[j]) != REG || REGNO (ops[j]) < FIRST_PSEUDO_REGISTER) { /* This op is a pseudo but the one it matches is not. */ /* If we can't put the other operand into a register, this alternative can't be used. */ if (classes[j] == NO_REGS) alt_fail = 1; /* Otherwise, add to the cost of this alternative the cost to copy the other operand to the register used for this operand. */ else alt_cost += copy_cost (ops[j], mode, classes[j], 1); } else { /* The costs of this operand are not the same as the other operand since move costs are not symmetric. Moreover, if we cannot tie them, this alternative needs to do a copy, which is one instruction. */ struct costs *pp = &this_op_costs[i]; for (class = 0; class < N_REG_CLASSES; class++) pp->cost[class] = ((recog_data.operand_type[i] != OP_OUT ? may_move_in_cost[mode][class][(int) classes[i]] : 0) + (recog_data.operand_type[i] != OP_IN ? may_move_out_cost[mode][(int) classes[i]][class] : 0)); /* If the alternative actually allows memory, make things a bit cheaper since we won't need an extra insn to load it. */ pp->mem_cost = ((recog_data.operand_type[i] != OP_IN ? MEMORY_MOVE_COST (mode, classes[i], 0) : 0) + (recog_data.operand_type[i] != OP_OUT ? MEMORY_MOVE_COST (mode, classes[i], 1) : 0) - allows_mem[i]); /* If we have assigned a class to this register in our first pass, add a cost to this alternative corresponding to what we would add if this register were not in the appropriate class. */ if (reg_pref) alt_cost += (may_move_in_cost[mode] [(unsigned char) reg_pref[REGNO (op)].prefclass] [(int) classes[i]]); if (REGNO (ops[i]) != REGNO (ops[j]) && ! find_reg_note (insn, REG_DEAD, op)) alt_cost += 2; /* This is in place of ordinary cost computation for this operand, so skip to the end of the alternative (should be just one character). */ while (*p && *p++ != ',') ; constraints[i] = p; continue; } } /* Scan all the constraint letters. See if the operand matches any of the constraints. Collect the valid register classes and see if this operand accepts memory. */ while (*p && (c = *p++) != ',') switch (c) { case '*': /* Ignore the next letter for this pass. */ p++; break; case '?': alt_cost += 2; case '!': case '#': case '&': case '0': case '1': case '2': case '3': case '4': case '5': case '6': case '7': case '8': case '9': break; case 'p': allows_addr = 1; win = address_operand (op, GET_MODE (op)); /* We know this operand is an address, so we want it to be allocated to a register that can be the base of an address, ie BASE_REG_CLASS. */ classes[i] = reg_class_subunion[(int) classes[i]] [(int) BASE_REG_CLASS]; break; case 'm': case 'o': case 'V': /* It doesn't seem worth distinguishing between offsettable and non-offsettable addresses here. */ allows_mem[i] = 1; if (GET_CODE (op) == MEM) win = 1; break; case '<': if (GET_CODE (op) == MEM && (GET_CODE (XEXP (op, 0)) == PRE_DEC || GET_CODE (XEXP (op, 0)) == POST_DEC)) win = 1; break; case '>': if (GET_CODE (op) == MEM && (GET_CODE (XEXP (op, 0)) == PRE_INC || GET_CODE (XEXP (op, 0)) == POST_INC)) win = 1; break; case 'E': #ifndef REAL_ARITHMETIC /* Match any floating double constant, but only if we can examine the bits of it reliably. */ if ((HOST_FLOAT_FORMAT != TARGET_FLOAT_FORMAT || HOST_BITS_PER_WIDE_INT != BITS_PER_WORD) && GET_MODE (op) != VOIDmode && ! flag_pretend_float) break; #endif if (GET_CODE (op) == CONST_DOUBLE) win = 1; break; case 'F': if (GET_CODE (op) == CONST_DOUBLE) win = 1; break; case 'G': case 'H': if (GET_CODE (op) == CONST_DOUBLE && CONST_DOUBLE_OK_FOR_LETTER_P (op, c)) win = 1; break; case 's': if (GET_CODE (op) == CONST_INT || (GET_CODE (op) == CONST_DOUBLE && GET_MODE (op) == VOIDmode)) break; case 'i': if (CONSTANT_P (op) #ifdef LEGITIMATE_PIC_OPERAND_P && (! flag_pic || LEGITIMATE_PIC_OPERAND_P (op)) #endif ) win = 1; break; case 'n': if (GET_CODE (op) == CONST_INT || (GET_CODE (op) == CONST_DOUBLE && GET_MODE (op) == VOIDmode)) win = 1; break; case 'I': case 'J': case 'K': case 'L': case 'M': case 'N': case 'O': case 'P': if (GET_CODE (op) == CONST_INT && CONST_OK_FOR_LETTER_P (INTVAL (op), c)) win = 1; break; case 'X': win = 1; break; case 'g': if (GET_CODE (op) == MEM || (CONSTANT_P (op) #ifdef LEGITIMATE_PIC_OPERAND_P && (! flag_pic || LEGITIMATE_PIC_OPERAND_P (op)) #endif )) win = 1; allows_mem[i] = 1; case 'r': classes[i] = reg_class_subunion[(int) classes[i]][(int) GENERAL_REGS]; break; default: if (REG_CLASS_FROM_LETTER (c) != NO_REGS) classes[i] = reg_class_subunion[(int) classes[i]] [(int) REG_CLASS_FROM_LETTER (c)]; #ifdef EXTRA_CONSTRAINT else if (EXTRA_CONSTRAINT (op, c)) win = 1; #endif break; } constraints[i] = p; /* How we account for this operand now depends on whether it is a pseudo register or not. If it is, we first check if any register classes are valid. If not, we ignore this alternative, since we want to assume that all pseudos get allocated for register preferencing. If some register class is valid, compute the costs of moving the pseudo into that class. */ if (GET_CODE (op) == REG && REGNO (op) >= FIRST_PSEUDO_REGISTER) { if (classes[i] == NO_REGS) { /* We must always fail if the operand is a REG, but we did not find a suitable class. Otherwise we may perform an uninitialized read from this_op_costs after the `continue' statement below. */ alt_fail = 1; } else { struct costs *pp = &this_op_costs[i]; for (class = 0; class < N_REG_CLASSES; class++) pp->cost[class] = ((recog_data.operand_type[i] != OP_OUT ? may_move_in_cost[mode][class][(int) classes[i]] : 0) + (recog_data.operand_type[i] != OP_IN ? may_move_out_cost[mode][(int) classes[i]][class] : 0)); /* If the alternative actually allows memory, make things a bit cheaper since we won't need an extra insn to load it. */ pp->mem_cost = ((recog_data.operand_type[i] != OP_IN ? MEMORY_MOVE_COST (mode, classes[i], 0) : 0) + (recog_data.operand_type[i] != OP_OUT ? MEMORY_MOVE_COST (mode, classes[i], 1) : 0) - allows_mem[i]); /* If we have assigned a class to this register in our first pass, add a cost to this alternative corresponding to what we would add if this register were not in the appropriate class. */ if (reg_pref) alt_cost += (may_move_in_cost[mode] [(unsigned char) reg_pref[REGNO (op)].prefclass] [(int) classes[i]]); } } /* Otherwise, if this alternative wins, either because we have already determined that or if we have a hard register of the proper class, there is no cost for this alternative. */ else if (win || (GET_CODE (op) == REG && reg_fits_class_p (op, classes[i], 0, GET_MODE (op)))) ; /* If registers are valid, the cost of this alternative includes copying the object to and/or from a register. */ else if (classes[i] != NO_REGS) { if (recog_data.operand_type[i] != OP_OUT) alt_cost += copy_cost (op, mode, classes[i], 1); if (recog_data.operand_type[i] != OP_IN) alt_cost += copy_cost (op, mode, classes[i], 0); } /* The only other way this alternative can be used is if this is a constant that could be placed into memory. */ else if (CONSTANT_P (op) && (allows_addr || allows_mem[i])) alt_cost += MEMORY_MOVE_COST (mode, classes[i], 1); else alt_fail = 1; } if (alt_fail) continue; /* Finally, update the costs with the information we've calculated about this alternative. */ for (i = 0; i < n_ops; i++) if (GET_CODE (ops[i]) == REG && REGNO (ops[i]) >= FIRST_PSEUDO_REGISTER) { struct costs *pp = &op_costs[i], *qq = &this_op_costs[i]; int scale = 1 + (recog_data.operand_type[i] == OP_INOUT); pp->mem_cost = MIN (pp->mem_cost, (qq->mem_cost + alt_cost) * scale); for (class = 0; class < N_REG_CLASSES; class++) pp->cost[class] = MIN (pp->cost[class], (qq->cost[class] + alt_cost) * scale); } } /* If this insn is a single set copying operand 1 to operand 0 and one operand is a pseudo with the other a hard reg or a pseudo that prefers a register that is in its own register class then we may want to adjust the cost of that register class to -1. Avoid the adjustment if the source does not die to avoid stressing of register allocator by preferrencing two coliding registers into single class. Also avoid the adjustment if a copy between registers of the class is expensive (ten times the cost of a default copy is considered arbitrarily expensive). This avoids losing when the preferred class is very expensive as the source of a copy instruction. */ if ((set = single_set (insn)) != 0 && ops[0] == SET_DEST (set) && ops[1] == SET_SRC (set) && GET_CODE (ops[0]) == REG && GET_CODE (ops[1]) == REG && find_regno_note (insn, REG_DEAD, REGNO (ops[1]))) for (i = 0; i <= 1; i++) if (REGNO (ops[i]) >= FIRST_PSEUDO_REGISTER) { unsigned int regno = REGNO (ops[!i]); enum machine_mode mode = GET_MODE (ops[!i]); int class; unsigned int nr; if (regno >= FIRST_PSEUDO_REGISTER && reg_pref != 0) { enum reg_class pref = reg_pref[regno].prefclass; if ((reg_class_size[(unsigned char) pref] == CLASS_MAX_NREGS (pref, mode)) && REGISTER_MOVE_COST (mode, pref, pref) < 10 * 2) op_costs[i].cost[(unsigned char) pref] = -1; } else if (regno < FIRST_PSEUDO_REGISTER) for (class = 0; class < N_REG_CLASSES; class++) if (TEST_HARD_REG_BIT (reg_class_contents[class], regno) && reg_class_size[class] == CLASS_MAX_NREGS (class, mode)) { if (reg_class_size[class] == 1) op_costs[i].cost[class] = -1; else { for (nr = 0; nr < HARD_REGNO_NREGS (regno, mode); nr++) { if (! TEST_HARD_REG_BIT (reg_class_contents[class], regno + nr)) break; } if (nr == HARD_REGNO_NREGS (regno,mode)) op_costs[i].cost[class] = -1; } } } } /* Compute the cost of loading X into (if TO_P is non-zero) or from (if TO_P is zero) a register of class CLASS in mode MODE. X must not be a pseudo. */ static int copy_cost (x, mode, class, to_p) rtx x; enum machine_mode mode ATTRIBUTE_UNUSED; enum reg_class class; int to_p ATTRIBUTE_UNUSED; { #ifdef HAVE_SECONDARY_RELOADS enum reg_class secondary_class = NO_REGS; #endif /* If X is a SCRATCH, there is actually nothing to move since we are assuming optimal allocation. */ if (GET_CODE (x) == SCRATCH) return 0; /* Get the class we will actually use for a reload. */ class = PREFERRED_RELOAD_CLASS (x, class); #ifdef HAVE_SECONDARY_RELOADS /* If we need a secondary reload (we assume here that we are using the secondary reload as an intermediate, not a scratch register), the cost is that to load the input into the intermediate register, then to copy them. We use a special value of TO_P to avoid recursion. */ #ifdef SECONDARY_INPUT_RELOAD_CLASS if (to_p == 1) secondary_class = SECONDARY_INPUT_RELOAD_CLASS (class, mode, x); #endif #ifdef SECONDARY_OUTPUT_RELOAD_CLASS if (! to_p) secondary_class = SECONDARY_OUTPUT_RELOAD_CLASS (class, mode, x); #endif if (secondary_class != NO_REGS) return (move_cost[mode][(int) secondary_class][(int) class] + copy_cost (x, mode, secondary_class, 2)); #endif /* HAVE_SECONDARY_RELOADS */ /* For memory, use the memory move cost, for (hard) registers, use the cost to move between the register classes, and use 2 for everything else (constants). */ if (GET_CODE (x) == MEM || class == NO_REGS) return MEMORY_MOVE_COST (mode, class, to_p); else if (GET_CODE (x) == REG) return move_cost[mode][(int) REGNO_REG_CLASS (REGNO (x))][(int) class]; else /* If this is a constant, we may eventually want to call rtx_cost here. */ return COSTS_N_INSNS (1); } /* Record the pseudo registers we must reload into hard registers in a subexpression of a memory address, X. CLASS is the class that the register needs to be in and is either BASE_REG_CLASS or INDEX_REG_CLASS. SCALE is twice the amount to multiply the cost by (it is twice so we can represent half-cost adjustments). */ static void record_address_regs (x, class, scale) rtx x; enum reg_class class; int scale; { register enum rtx_code code = GET_CODE (x); switch (code) { case CONST_INT: case CONST: case CC0: case PC: case SYMBOL_REF: case LABEL_REF: return; case PLUS: /* When we have an address that is a sum, we must determine whether registers are "base" or "index" regs. If there is a sum of two registers, we must choose one to be the "base". Luckily, we can use the REG_POINTER to make a good choice most of the time. We only need to do this on machines that can have two registers in an address and where the base and index register classes are different. ??? This code used to set REGNO_POINTER_FLAG in some cases, but that seems bogus since it should only be set when we are sure the register is being used as a pointer. */ { rtx arg0 = XEXP (x, 0); rtx arg1 = XEXP (x, 1); register enum rtx_code code0 = GET_CODE (arg0); register enum rtx_code code1 = GET_CODE (arg1); /* Look inside subregs. */ if (code0 == SUBREG) arg0 = SUBREG_REG (arg0), code0 = GET_CODE (arg0); if (code1 == SUBREG) arg1 = SUBREG_REG (arg1), code1 = GET_CODE (arg1); /* If this machine only allows one register per address, it must be in the first operand. */ if (MAX_REGS_PER_ADDRESS == 1) record_address_regs (arg0, class, scale); /* If index and base registers are the same on this machine, just record registers in any non-constant operands. We assume here, as well as in the tests below, that all addresses are in canonical form. */ else if (INDEX_REG_CLASS == BASE_REG_CLASS) { record_address_regs (arg0, class, scale); if (! CONSTANT_P (arg1)) record_address_regs (arg1, class, scale); } /* If the second operand is a constant integer, it doesn't change what class the first operand must be. */ else if (code1 == CONST_INT || code1 == CONST_DOUBLE) record_address_regs (arg0, class, scale); /* If the second operand is a symbolic constant, the first operand must be an index register. */ else if (code1 == SYMBOL_REF || code1 == CONST || code1 == LABEL_REF) record_address_regs (arg0, INDEX_REG_CLASS, scale); /* If both operands are registers but one is already a hard register of index or base class, give the other the class that the hard register is not. */ #ifdef REG_OK_FOR_BASE_P else if (code0 == REG && code1 == REG && REGNO (arg0) < FIRST_PSEUDO_REGISTER && (REG_OK_FOR_BASE_P (arg0) || REG_OK_FOR_INDEX_P (arg0))) record_address_regs (arg1, REG_OK_FOR_BASE_P (arg0) ? INDEX_REG_CLASS : BASE_REG_CLASS, scale); else if (code0 == REG && code1 == REG && REGNO (arg1) < FIRST_PSEUDO_REGISTER && (REG_OK_FOR_BASE_P (arg1) || REG_OK_FOR_INDEX_P (arg1))) record_address_regs (arg0, REG_OK_FOR_BASE_P (arg1) ? INDEX_REG_CLASS : BASE_REG_CLASS, scale); #endif /* If one operand is known to be a pointer, it must be the base with the other operand the index. Likewise if the other operand is a MULT. */ else if ((code0 == REG && REG_POINTER (arg0)) || code1 == MULT) { record_address_regs (arg0, BASE_REG_CLASS, scale); record_address_regs (arg1, INDEX_REG_CLASS, scale); } else if ((code1 == REG && REG_POINTER (arg1)) || code0 == MULT) { record_address_regs (arg0, INDEX_REG_CLASS, scale); record_address_regs (arg1, BASE_REG_CLASS, scale); } /* Otherwise, count equal chances that each might be a base or index register. This case should be rare. */ else { record_address_regs (arg0, BASE_REG_CLASS, scale / 2); record_address_regs (arg0, INDEX_REG_CLASS, scale / 2); record_address_regs (arg1, BASE_REG_CLASS, scale / 2); record_address_regs (arg1, INDEX_REG_CLASS, scale / 2); } } break; /* Double the importance of a pseudo register that is incremented or decremented, since it would take two extra insns if it ends up in the wrong place. */ case POST_MODIFY: case PRE_MODIFY: record_address_regs (XEXP (x, 0), BASE_REG_CLASS, 2 * scale); if (REG_P (XEXP (XEXP (x, 1), 1))) record_address_regs (XEXP (XEXP (x, 1), 1), INDEX_REG_CLASS, 2 * scale); break; case POST_INC: case PRE_INC: case POST_DEC: case PRE_DEC: /* Double the importance of a pseudo register that is incremented or decremented, since it would take two extra insns if it ends up in the wrong place. If the operand is a pseudo, show it is being used in an INC_DEC context. */ #ifdef FORBIDDEN_INC_DEC_CLASSES if (GET_CODE (XEXP (x, 0)) == REG && REGNO (XEXP (x, 0)) >= FIRST_PSEUDO_REGISTER) in_inc_dec[REGNO (XEXP (x, 0))] = 1; #endif record_address_regs (XEXP (x, 0), class, 2 * scale); break; case REG: { register struct costs *pp = &costs[REGNO (x)]; register int i; pp->mem_cost += (MEMORY_MOVE_COST (Pmode, class, 1) * scale) / 2; for (i = 0; i < N_REG_CLASSES; i++) pp->cost[i] += (may_move_in_cost[Pmode][i][(int) class] * scale) / 2; } break; default: { register const char *fmt = GET_RTX_FORMAT (code); register int i; for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) if (fmt[i] == 'e') record_address_regs (XEXP (x, i), class, scale); } } } #ifdef FORBIDDEN_INC_DEC_CLASSES /* Return 1 if REG is valid as an auto-increment memory reference to an object of MODE. */ static int auto_inc_dec_reg_p (reg, mode) rtx reg; enum machine_mode mode; { if (HAVE_POST_INCREMENT && memory_address_p (mode, gen_rtx_POST_INC (Pmode, reg))) return 1; if (HAVE_POST_DECREMENT && memory_address_p (mode, gen_rtx_POST_DEC (Pmode, reg))) return 1; if (HAVE_PRE_INCREMENT && memory_address_p (mode, gen_rtx_PRE_INC (Pmode, reg))) return 1; if (HAVE_PRE_DECREMENT && memory_address_p (mode, gen_rtx_PRE_DEC (Pmode, reg))) return 1; return 0; } #endif static short *renumber; static size_t regno_allocated; static unsigned int reg_n_max; /* Allocate enough space to hold NUM_REGS registers for the tables used for reg_scan and flow_analysis that are indexed by the register number. If NEW_P is non zero, initialize all of the registers, otherwise only initialize the new registers allocated. The same table is kept from function to function, only reallocating it when we need more room. If RENUMBER_P is non zero, allocate the reg_renumber array also. */ void allocate_reg_info (num_regs, new_p, renumber_p) size_t num_regs; int new_p; int renumber_p; { size_t size_info; size_t size_renumber; size_t min = (new_p) ? 0 : reg_n_max; struct reg_info_data *reg_data; if (num_regs > regno_allocated) { size_t old_allocated = regno_allocated; regno_allocated = num_regs + (num_regs / 20); /* add some slop space */ size_renumber = regno_allocated * sizeof (short); if (!reg_n_info) { VARRAY_REG_INIT (reg_n_info, regno_allocated, "reg_n_info"); renumber = (short *) xmalloc (size_renumber); reg_pref_buffer = (struct reg_pref *) xmalloc (regno_allocated * sizeof (struct reg_pref)); } else { VARRAY_GROW (reg_n_info, regno_allocated); if (new_p) /* if we're zapping everything, no need to realloc */ { free ((char *)renumber); free ((char *)reg_pref); renumber = (short *) xmalloc (size_renumber); reg_pref_buffer = (struct reg_pref *) xmalloc (regno_allocated * sizeof (struct reg_pref)); } else { renumber = (short *) xrealloc ((char *)renumber, size_renumber); reg_pref_buffer = (struct reg_pref *) xrealloc ((char *)reg_pref_buffer, regno_allocated * sizeof (struct reg_pref)); } } size_info = (regno_allocated - old_allocated) * sizeof (reg_info) + sizeof (struct reg_info_data) - sizeof (reg_info); reg_data = (struct reg_info_data *) xcalloc (size_info, 1); reg_data->min_index = old_allocated; reg_data->max_index = regno_allocated - 1; reg_data->next = reg_info_head; reg_info_head = reg_data; } reg_n_max = num_regs; if (min < num_regs) { /* Loop through each of the segments allocated for the actual reg_info pages, and set up the pointers, zero the pages, etc. */ for (reg_data = reg_info_head; reg_data && reg_data->max_index >= min; reg_data = reg_data->next) { size_t min_index = reg_data->min_index; size_t max_index = reg_data->max_index; size_t max = MIN (max_index, num_regs); size_t local_min = min - min_index; size_t i; if (reg_data->min_index > num_regs) continue; if (min < min_index) local_min = 0; if (!reg_data->used_p) /* page just allocated with calloc */ reg_data->used_p = 1; /* no need to zero */ else memset ((char *) ®_data->data[local_min], 0, sizeof (reg_info) * (max - min_index - local_min + 1)); for (i = min_index+local_min; i <= max; i++) { VARRAY_REG (reg_n_info, i) = ®_data->data[i-min_index]; REG_BASIC_BLOCK (i) = REG_BLOCK_UNKNOWN; renumber[i] = -1; reg_pref_buffer[i].prefclass = (char) NO_REGS; reg_pref_buffer[i].altclass = (char) NO_REGS; } } } /* If {pref,alt}class have already been allocated, update the pointers to the newly realloced ones. */ if (reg_pref) reg_pref = reg_pref_buffer; if (renumber_p) reg_renumber = renumber; /* Tell the regset code about the new number of registers */ MAX_REGNO_REG_SET (num_regs, new_p, renumber_p); } /* Free up the space allocated by allocate_reg_info. */ void free_reg_info () { if (reg_n_info) { struct reg_info_data *reg_data; struct reg_info_data *reg_next; VARRAY_FREE (reg_n_info); for (reg_data = reg_info_head; reg_data; reg_data = reg_next) { reg_next = reg_data->next; free ((char *)reg_data); } free (reg_pref_buffer); reg_pref_buffer = (struct reg_pref *)0; reg_info_head = (struct reg_info_data *)0; renumber = (short *)0; } regno_allocated = 0; reg_n_max = 0; } /* This is the `regscan' pass of the compiler, run just before cse and again just before loop. It finds the first and last use of each pseudo-register and records them in the vectors regno_first_uid, regno_last_uid and counts the number of sets in the vector reg_n_sets. REPEAT is nonzero the second time this is called. */ /* Maximum number of parallel sets and clobbers in any insn in this fn. Always at least 3, since the combiner could put that many together and we want this to remain correct for all the remaining passes. This corresponds to the maximum number of times note_stores will call a function for any insn. */ int max_parallel; /* Used as a temporary to record the largest number of registers in PARALLEL in a SET_DEST. This is added to max_parallel. */ static int max_set_parallel; void reg_scan (f, nregs, repeat) rtx f; unsigned int nregs; int repeat ATTRIBUTE_UNUSED; { register rtx insn; allocate_reg_info (nregs, TRUE, FALSE); max_parallel = 3; max_set_parallel = 0; for (insn = f; insn; insn = NEXT_INSN (insn)) if (GET_CODE (insn) == INSN || GET_CODE (insn) == CALL_INSN || GET_CODE (insn) == JUMP_INSN) { if (GET_CODE (PATTERN (insn)) == PARALLEL && XVECLEN (PATTERN (insn), 0) > max_parallel) max_parallel = XVECLEN (PATTERN (insn), 0); reg_scan_mark_refs (PATTERN (insn), insn, 0, 0); if (REG_NOTES (insn)) reg_scan_mark_refs (REG_NOTES (insn), insn, 1, 0); } max_parallel += max_set_parallel; } /* Update 'regscan' information by looking at the insns from FIRST to LAST. Some new REGs have been created, and any REG with number greater than OLD_MAX_REGNO is such a REG. We only update information for those. */ void reg_scan_update (first, last, old_max_regno) rtx first; rtx last; unsigned int old_max_regno; { register rtx insn; allocate_reg_info (max_reg_num (), FALSE, FALSE); for (insn = first; insn != last; insn = NEXT_INSN (insn)) if (GET_CODE (insn) == INSN || GET_CODE (insn) == CALL_INSN || GET_CODE (insn) == JUMP_INSN) { if (GET_CODE (PATTERN (insn)) == PARALLEL && XVECLEN (PATTERN (insn), 0) > max_parallel) max_parallel = XVECLEN (PATTERN (insn), 0); reg_scan_mark_refs (PATTERN (insn), insn, 0, old_max_regno); if (REG_NOTES (insn)) reg_scan_mark_refs (REG_NOTES (insn), insn, 1, old_max_regno); } } /* X is the expression to scan. INSN is the insn it appears in. NOTE_FLAG is nonzero if X is from INSN's notes rather than its body. We should only record information for REGs with numbers greater than or equal to MIN_REGNO. */ static void reg_scan_mark_refs (x, insn, note_flag, min_regno) rtx x; rtx insn; int note_flag; unsigned int min_regno; { register enum rtx_code code; register rtx dest; register rtx note; code = GET_CODE (x); switch (code) { case CONST: case CONST_INT: case CONST_DOUBLE: case CC0: case PC: case SYMBOL_REF: case LABEL_REF: case ADDR_VEC: case ADDR_DIFF_VEC: return; case REG: { unsigned int regno = REGNO (x); if (regno >= min_regno) { REGNO_LAST_NOTE_UID (regno) = INSN_UID (insn); if (!note_flag) REGNO_LAST_UID (regno) = INSN_UID (insn); if (REGNO_FIRST_UID (regno) == 0) REGNO_FIRST_UID (regno) = INSN_UID (insn); } } break; case EXPR_LIST: if (XEXP (x, 0)) reg_scan_mark_refs (XEXP (x, 0), insn, note_flag, min_regno); if (XEXP (x, 1)) reg_scan_mark_refs (XEXP (x, 1), insn, note_flag, min_regno); break; case INSN_LIST: if (XEXP (x, 1)) reg_scan_mark_refs (XEXP (x, 1), insn, note_flag, min_regno); break; case SET: /* Count a set of the destination if it is a register. */ for (dest = SET_DEST (x); GET_CODE (dest) == SUBREG || GET_CODE (dest) == STRICT_LOW_PART || GET_CODE (dest) == ZERO_EXTEND; dest = XEXP (dest, 0)) ; /* For a PARALLEL, record the number of things (less the usual one for a SET) that are set. */ if (GET_CODE (dest) == PARALLEL) max_set_parallel = MAX (max_set_parallel, XVECLEN (dest, 0) - 1); if (GET_CODE (dest) == REG && REGNO (dest) >= min_regno) REG_N_SETS (REGNO (dest))++; /* If this is setting a pseudo from another pseudo or the sum of a pseudo and a constant integer and the other pseudo is known to be a pointer, set the destination to be a pointer as well. Likewise if it is setting the destination from an address or from a value equivalent to an address or to the sum of an address and something else. But don't do any of this if the pseudo corresponds to a user variable since it should have already been set as a pointer based on the type. */ if (GET_CODE (SET_DEST (x)) == REG && REGNO (SET_DEST (x)) >= FIRST_PSEUDO_REGISTER && REGNO (SET_DEST (x)) >= min_regno /* If the destination pseudo is set more than once, then other sets might not be to a pointer value (consider access to a union in two threads of control in the presense of global optimizations). So only set REG_POINTER on the destination pseudo if this is the only set of that pseudo. */ && REG_N_SETS (REGNO (SET_DEST (x))) == 1 && ! REG_USERVAR_P (SET_DEST (x)) && ! REG_POINTER (SET_DEST (x)) && ((GET_CODE (SET_SRC (x)) == REG && REG_POINTER (SET_SRC (x))) || ((GET_CODE (SET_SRC (x)) == PLUS || GET_CODE (SET_SRC (x)) == LO_SUM) && GET_CODE (XEXP (SET_SRC (x), 1)) == CONST_INT && GET_CODE (XEXP (SET_SRC (x), 0)) == REG && REG_POINTER (XEXP (SET_SRC (x), 0))) || GET_CODE (SET_SRC (x)) == CONST || GET_CODE (SET_SRC (x)) == SYMBOL_REF || GET_CODE (SET_SRC (x)) == LABEL_REF || (GET_CODE (SET_SRC (x)) == HIGH && (GET_CODE (XEXP (SET_SRC (x), 0)) == CONST || GET_CODE (XEXP (SET_SRC (x), 0)) == SYMBOL_REF || GET_CODE (XEXP (SET_SRC (x), 0)) == LABEL_REF)) || ((GET_CODE (SET_SRC (x)) == PLUS || GET_CODE (SET_SRC (x)) == LO_SUM) && (GET_CODE (XEXP (SET_SRC (x), 1)) == CONST || GET_CODE (XEXP (SET_SRC (x), 1)) == SYMBOL_REF || GET_CODE (XEXP (SET_SRC (x), 1)) == LABEL_REF)) || ((note = find_reg_note (insn, REG_EQUAL, 0)) != 0 && (GET_CODE (XEXP (note, 0)) == CONST || GET_CODE (XEXP (note, 0)) == SYMBOL_REF || GET_CODE (XEXP (note, 0)) == LABEL_REF)))) REG_POINTER (SET_DEST (x)) = 1; /* ... fall through ... */ default: { register const char *fmt = GET_RTX_FORMAT (code); register int i; for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) { if (fmt[i] == 'e') reg_scan_mark_refs (XEXP (x, i), insn, note_flag, min_regno); else if (fmt[i] == 'E' && XVEC (x, i) != 0) { register int j; for (j = XVECLEN (x, i) - 1; j >= 0; j--) reg_scan_mark_refs (XVECEXP (x, i, j), insn, note_flag, min_regno); } } } } } /* Return nonzero if C1 is a subset of C2, i.e., if every register in C1 is also in C2. */ int reg_class_subset_p (c1, c2) register enum reg_class c1; register enum reg_class c2; { if (c1 == c2) return 1; if (c2 == ALL_REGS) win: return 1; GO_IF_HARD_REG_SUBSET (reg_class_contents[(int)c1], reg_class_contents[(int)c2], win); return 0; } /* Return nonzero if there is a register that is in both C1 and C2. */ int reg_classes_intersect_p (c1, c2) register enum reg_class c1; register enum reg_class c2; { #ifdef HARD_REG_SET register #endif HARD_REG_SET c; if (c1 == c2) return 1; if (c1 == ALL_REGS || c2 == ALL_REGS) return 1; COPY_HARD_REG_SET (c, reg_class_contents[(int) c1]); AND_HARD_REG_SET (c, reg_class_contents[(int) c2]); GO_IF_HARD_REG_SUBSET (c, reg_class_contents[(int) NO_REGS], lose); return 1; lose: return 0; } /* Release any memory allocated by register sets. */ void regset_release_memory () { bitmap_release_memory (); }