/* Expand the basic unary and binary arithmetic operations, for GNU compiler.
Copyright (C) 1987-2015 Free Software Foundation, Inc.
This file is part of GCC.
GCC is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free
Software Foundation; either version 3, or (at your option) any later
version.
GCC is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
for more details.
You should have received a copy of the GNU General Public License
along with GCC; see the file COPYING3. If not see
. */
#include "config.h"
#include "system.h"
#include "coretypes.h"
#include "tm.h"
#include "diagnostic-core.h"
/* Include insn-config.h before expr.h so that HAVE_conditional_move
is properly defined. */
#include "insn-config.h"
#include "rtl.h"
#include "hash-set.h"
#include "machmode.h"
#include "vec.h"
#include "double-int.h"
#include "input.h"
#include "alias.h"
#include "symtab.h"
#include "wide-int.h"
#include "inchash.h"
#include "tree.h"
#include "tree-hasher.h"
#include "stor-layout.h"
#include "stringpool.h"
#include "varasm.h"
#include "tm_p.h"
#include "flags.h"
#include "hard-reg-set.h"
#include "input.h"
#include "function.h"
#include "except.h"
#include "expr.h"
#include "insn-codes.h"
#include "optabs.h"
#include "libfuncs.h"
#include "recog.h"
#include "reload.h"
#include "ggc.h"
#include "predict.h"
#include "dominance.h"
#include "cfg.h"
#include "basic-block.h"
#include "target.h"
struct target_optabs default_target_optabs;
struct target_libfuncs default_target_libfuncs;
struct target_optabs *this_fn_optabs = &default_target_optabs;
#if SWITCHABLE_TARGET
struct target_optabs *this_target_optabs = &default_target_optabs;
struct target_libfuncs *this_target_libfuncs = &default_target_libfuncs;
#endif
#define libfunc_hash \
(this_target_libfuncs->x_libfunc_hash)
static void prepare_float_lib_cmp (rtx, rtx, enum rtx_code, rtx *,
machine_mode *);
static rtx expand_unop_direct (machine_mode, optab, rtx, rtx, int);
static void emit_libcall_block_1 (rtx_insn *, rtx, rtx, rtx, bool);
/* Debug facility for use in GDB. */
void debug_optab_libfuncs (void);
/* Prefixes for the current version of decimal floating point (BID vs. DPD) */
#if ENABLE_DECIMAL_BID_FORMAT
#define DECIMAL_PREFIX "bid_"
#else
#define DECIMAL_PREFIX "dpd_"
#endif
/* Used for libfunc_hash. */
hashval_t
libfunc_hasher::hash (libfunc_entry *e)
{
return ((e->mode1 + e->mode2 * NUM_MACHINE_MODES) ^ e->op);
}
/* Used for libfunc_hash. */
bool
libfunc_hasher::equal (libfunc_entry *e1, libfunc_entry *e2)
{
return e1->op == e2->op && e1->mode1 == e2->mode1 && e1->mode2 == e2->mode2;
}
/* Return libfunc corresponding operation defined by OPTAB converting
from MODE2 to MODE1. Trigger lazy initialization if needed, return NULL
if no libfunc is available. */
rtx
convert_optab_libfunc (convert_optab optab, machine_mode mode1,
machine_mode mode2)
{
struct libfunc_entry e;
struct libfunc_entry **slot;
/* ??? This ought to be an assert, but not all of the places
that we expand optabs know about the optabs that got moved
to being direct. */
if (!(optab >= FIRST_CONV_OPTAB && optab <= LAST_CONVLIB_OPTAB))
return NULL_RTX;
e.op = optab;
e.mode1 = mode1;
e.mode2 = mode2;
slot = libfunc_hash->find_slot (&e, NO_INSERT);
if (!slot)
{
const struct convert_optab_libcall_d *d
= &convlib_def[optab - FIRST_CONV_OPTAB];
if (d->libcall_gen == NULL)
return NULL;
d->libcall_gen (optab, d->libcall_basename, mode1, mode2);
slot = libfunc_hash->find_slot (&e, NO_INSERT);
if (!slot)
return NULL;
}
return (*slot)->libfunc;
}
/* Return libfunc corresponding operation defined by OPTAB in MODE.
Trigger lazy initialization if needed, return NULL if no libfunc is
available. */
rtx
optab_libfunc (optab optab, machine_mode mode)
{
struct libfunc_entry e;
struct libfunc_entry **slot;
/* ??? This ought to be an assert, but not all of the places
that we expand optabs know about the optabs that got moved
to being direct. */
if (!(optab >= FIRST_NORM_OPTAB && optab <= LAST_NORMLIB_OPTAB))
return NULL_RTX;
e.op = optab;
e.mode1 = mode;
e.mode2 = VOIDmode;
slot = libfunc_hash->find_slot (&e, NO_INSERT);
if (!slot)
{
const struct optab_libcall_d *d
= &normlib_def[optab - FIRST_NORM_OPTAB];
if (d->libcall_gen == NULL)
return NULL;
d->libcall_gen (optab, d->libcall_basename, d->libcall_suffix, mode);
slot = libfunc_hash->find_slot (&e, NO_INSERT);
if (!slot)
return NULL;
}
return (*slot)->libfunc;
}
/* Add a REG_EQUAL note to the last insn in INSNS. TARGET is being set to
the result of operation CODE applied to OP0 (and OP1 if it is a binary
operation).
If the last insn does not set TARGET, don't do anything, but return 1.
If the last insn or a previous insn sets TARGET and TARGET is one of OP0
or OP1, don't add the REG_EQUAL note but return 0. Our caller can then
try again, ensuring that TARGET is not one of the operands. */
static int
add_equal_note (rtx_insn *insns, rtx target, enum rtx_code code, rtx op0, rtx op1)
{
rtx_insn *last_insn;
rtx set;
rtx note;
gcc_assert (insns && INSN_P (insns) && NEXT_INSN (insns));
if (GET_RTX_CLASS (code) != RTX_COMM_ARITH
&& GET_RTX_CLASS (code) != RTX_BIN_ARITH
&& GET_RTX_CLASS (code) != RTX_COMM_COMPARE
&& GET_RTX_CLASS (code) != RTX_COMPARE
&& GET_RTX_CLASS (code) != RTX_UNARY)
return 1;
if (GET_CODE (target) == ZERO_EXTRACT)
return 1;
for (last_insn = insns;
NEXT_INSN (last_insn) != NULL_RTX;
last_insn = NEXT_INSN (last_insn))
;
/* If TARGET is in OP0 or OP1, punt. We'd end up with a note referencing
a value changing in the insn, so the note would be invalid for CSE. */
if (reg_overlap_mentioned_p (target, op0)
|| (op1 && reg_overlap_mentioned_p (target, op1)))
{
if (MEM_P (target)
&& (rtx_equal_p (target, op0)
|| (op1 && rtx_equal_p (target, op1))))
{
/* For MEM target, with MEM = MEM op X, prefer no REG_EQUAL note
over expanding it as temp = MEM op X, MEM = temp. If the target
supports MEM = MEM op X instructions, it is sometimes too hard
to reconstruct that form later, especially if X is also a memory,
and due to multiple occurrences of addresses the address might
be forced into register unnecessarily.
Note that not emitting the REG_EQUIV note might inhibit
CSE in some cases. */
set = single_set (last_insn);
if (set
&& GET_CODE (SET_SRC (set)) == code
&& MEM_P (SET_DEST (set))
&& (rtx_equal_p (SET_DEST (set), XEXP (SET_SRC (set), 0))
|| (op1 && rtx_equal_p (SET_DEST (set),
XEXP (SET_SRC (set), 1)))))
return 1;
}
return 0;
}
set = set_for_reg_notes (last_insn);
if (set == NULL_RTX)
return 1;
if (! rtx_equal_p (SET_DEST (set), target)
/* For a STRICT_LOW_PART, the REG_NOTE applies to what is inside it. */
&& (GET_CODE (SET_DEST (set)) != STRICT_LOW_PART
|| ! rtx_equal_p (XEXP (SET_DEST (set), 0), target)))
return 1;
if (GET_RTX_CLASS (code) == RTX_UNARY)
switch (code)
{
case FFS:
case CLZ:
case CTZ:
case CLRSB:
case POPCOUNT:
case PARITY:
case BSWAP:
if (GET_MODE (op0) != VOIDmode && GET_MODE (target) != GET_MODE (op0))
{
note = gen_rtx_fmt_e (code, GET_MODE (op0), copy_rtx (op0));
if (GET_MODE_SIZE (GET_MODE (op0))
> GET_MODE_SIZE (GET_MODE (target)))
note = simplify_gen_unary (TRUNCATE, GET_MODE (target),
note, GET_MODE (op0));
else
note = simplify_gen_unary (ZERO_EXTEND, GET_MODE (target),
note, GET_MODE (op0));
break;
}
/* FALLTHRU */
default:
note = gen_rtx_fmt_e (code, GET_MODE (target), copy_rtx (op0));
break;
}
else
note = gen_rtx_fmt_ee (code, GET_MODE (target), copy_rtx (op0), copy_rtx (op1));
set_unique_reg_note (last_insn, REG_EQUAL, note);
return 1;
}
/* Given two input operands, OP0 and OP1, determine what the correct from_mode
for a widening operation would be. In most cases this would be OP0, but if
that's a constant it'll be VOIDmode, which isn't useful. */
static machine_mode
widened_mode (machine_mode to_mode, rtx op0, rtx op1)
{
machine_mode m0 = GET_MODE (op0);
machine_mode m1 = GET_MODE (op1);
machine_mode result;
if (m0 == VOIDmode && m1 == VOIDmode)
return to_mode;
else if (m0 == VOIDmode || GET_MODE_SIZE (m0) < GET_MODE_SIZE (m1))
result = m1;
else
result = m0;
if (GET_MODE_SIZE (result) > GET_MODE_SIZE (to_mode))
return to_mode;
return result;
}
/* Like optab_handler, but for widening_operations that have a
TO_MODE and a FROM_MODE. */
enum insn_code
widening_optab_handler (optab op, machine_mode to_mode,
machine_mode from_mode)
{
unsigned scode = (op << 16) | to_mode;
if (to_mode != from_mode && from_mode != VOIDmode)
{
/* ??? Why does find_widening_optab_handler_and_mode attempt to
widen things that can't be widened? E.g. add_optab... */
if (op > LAST_CONV_OPTAB)
return CODE_FOR_nothing;
scode |= from_mode << 8;
}
return raw_optab_handler (scode);
}
/* Find a widening optab even if it doesn't widen as much as we want.
E.g. if from_mode is HImode, and to_mode is DImode, and there is no
direct HI->SI insn, then return SI->DI, if that exists.
If PERMIT_NON_WIDENING is non-zero then this can be used with
non-widening optabs also. */
enum insn_code
find_widening_optab_handler_and_mode (optab op, machine_mode to_mode,
machine_mode from_mode,
int permit_non_widening,
machine_mode *found_mode)
{
for (; (permit_non_widening || from_mode != to_mode)
&& GET_MODE_SIZE (from_mode) <= GET_MODE_SIZE (to_mode)
&& from_mode != VOIDmode;
from_mode = GET_MODE_WIDER_MODE (from_mode))
{
enum insn_code handler = widening_optab_handler (op, to_mode,
from_mode);
if (handler != CODE_FOR_nothing)
{
if (found_mode)
*found_mode = from_mode;
return handler;
}
}
return CODE_FOR_nothing;
}
/* Widen OP to MODE and return the rtx for the widened operand. UNSIGNEDP
says whether OP is signed or unsigned. NO_EXTEND is nonzero if we need
not actually do a sign-extend or zero-extend, but can leave the
higher-order bits of the result rtx undefined, for example, in the case
of logical operations, but not right shifts. */
static rtx
widen_operand (rtx op, machine_mode mode, machine_mode oldmode,
int unsignedp, int no_extend)
{
rtx result;
/* If we don't have to extend and this is a constant, return it. */
if (no_extend && GET_MODE (op) == VOIDmode)
return op;
/* If we must extend do so. If OP is a SUBREG for a promoted object, also
extend since it will be more efficient to do so unless the signedness of
a promoted object differs from our extension. */
if (! no_extend
|| (GET_CODE (op) == SUBREG && SUBREG_PROMOTED_VAR_P (op)
&& SUBREG_CHECK_PROMOTED_SIGN (op, unsignedp)))
return convert_modes (mode, oldmode, op, unsignedp);
/* If MODE is no wider than a single word, we return a lowpart or paradoxical
SUBREG. */
if (GET_MODE_SIZE (mode) <= UNITS_PER_WORD)
return gen_lowpart (mode, force_reg (GET_MODE (op), op));
/* Otherwise, get an object of MODE, clobber it, and set the low-order
part to OP. */
result = gen_reg_rtx (mode);
emit_clobber (result);
emit_move_insn (gen_lowpart (GET_MODE (op), result), op);
return result;
}
/* Return the optab used for computing the operation given by the tree code,
CODE and the tree EXP. This function is not always usable (for example, it
cannot give complete results for multiplication or division) but probably
ought to be relied on more widely throughout the expander. */
optab
optab_for_tree_code (enum tree_code code, const_tree type,
enum optab_subtype subtype)
{
bool trapv;
switch (code)
{
case BIT_AND_EXPR:
return and_optab;
case BIT_IOR_EXPR:
return ior_optab;
case BIT_NOT_EXPR:
return one_cmpl_optab;
case BIT_XOR_EXPR:
return xor_optab;
case MULT_HIGHPART_EXPR:
return TYPE_UNSIGNED (type) ? umul_highpart_optab : smul_highpart_optab;
case TRUNC_MOD_EXPR:
case CEIL_MOD_EXPR:
case FLOOR_MOD_EXPR:
case ROUND_MOD_EXPR:
return TYPE_UNSIGNED (type) ? umod_optab : smod_optab;
case RDIV_EXPR:
case TRUNC_DIV_EXPR:
case CEIL_DIV_EXPR:
case FLOOR_DIV_EXPR:
case ROUND_DIV_EXPR:
case EXACT_DIV_EXPR:
if (TYPE_SATURATING (type))
return TYPE_UNSIGNED (type) ? usdiv_optab : ssdiv_optab;
return TYPE_UNSIGNED (type) ? udiv_optab : sdiv_optab;
case LSHIFT_EXPR:
if (TREE_CODE (type) == VECTOR_TYPE)
{
if (subtype == optab_vector)
return TYPE_SATURATING (type) ? unknown_optab : vashl_optab;
gcc_assert (subtype == optab_scalar);
}
if (TYPE_SATURATING (type))
return TYPE_UNSIGNED (type) ? usashl_optab : ssashl_optab;
return ashl_optab;
case RSHIFT_EXPR:
if (TREE_CODE (type) == VECTOR_TYPE)
{
if (subtype == optab_vector)
return TYPE_UNSIGNED (type) ? vlshr_optab : vashr_optab;
gcc_assert (subtype == optab_scalar);
}
return TYPE_UNSIGNED (type) ? lshr_optab : ashr_optab;
case LROTATE_EXPR:
if (TREE_CODE (type) == VECTOR_TYPE)
{
if (subtype == optab_vector)
return vrotl_optab;
gcc_assert (subtype == optab_scalar);
}
return rotl_optab;
case RROTATE_EXPR:
if (TREE_CODE (type) == VECTOR_TYPE)
{
if (subtype == optab_vector)
return vrotr_optab;
gcc_assert (subtype == optab_scalar);
}
return rotr_optab;
case MAX_EXPR:
return TYPE_UNSIGNED (type) ? umax_optab : smax_optab;
case MIN_EXPR:
return TYPE_UNSIGNED (type) ? umin_optab : smin_optab;
case REALIGN_LOAD_EXPR:
return vec_realign_load_optab;
case WIDEN_SUM_EXPR:
return TYPE_UNSIGNED (type) ? usum_widen_optab : ssum_widen_optab;
case DOT_PROD_EXPR:
return TYPE_UNSIGNED (type) ? udot_prod_optab : sdot_prod_optab;
case SAD_EXPR:
return TYPE_UNSIGNED (type) ? usad_optab : ssad_optab;
case WIDEN_MULT_PLUS_EXPR:
return (TYPE_UNSIGNED (type)
? (TYPE_SATURATING (type)
? usmadd_widen_optab : umadd_widen_optab)
: (TYPE_SATURATING (type)
? ssmadd_widen_optab : smadd_widen_optab));
case WIDEN_MULT_MINUS_EXPR:
return (TYPE_UNSIGNED (type)
? (TYPE_SATURATING (type)
? usmsub_widen_optab : umsub_widen_optab)
: (TYPE_SATURATING (type)
? ssmsub_widen_optab : smsub_widen_optab));
case FMA_EXPR:
return fma_optab;
case REDUC_MAX_EXPR:
return TYPE_UNSIGNED (type)
? reduc_umax_scal_optab : reduc_smax_scal_optab;
case REDUC_MIN_EXPR:
return TYPE_UNSIGNED (type)
? reduc_umin_scal_optab : reduc_smin_scal_optab;
case REDUC_PLUS_EXPR:
return reduc_plus_scal_optab;
case VEC_WIDEN_MULT_HI_EXPR:
return TYPE_UNSIGNED (type) ?
vec_widen_umult_hi_optab : vec_widen_smult_hi_optab;
case VEC_WIDEN_MULT_LO_EXPR:
return TYPE_UNSIGNED (type) ?
vec_widen_umult_lo_optab : vec_widen_smult_lo_optab;
case VEC_WIDEN_MULT_EVEN_EXPR:
return TYPE_UNSIGNED (type) ?
vec_widen_umult_even_optab : vec_widen_smult_even_optab;
case VEC_WIDEN_MULT_ODD_EXPR:
return TYPE_UNSIGNED (type) ?
vec_widen_umult_odd_optab : vec_widen_smult_odd_optab;
case VEC_WIDEN_LSHIFT_HI_EXPR:
return TYPE_UNSIGNED (type) ?
vec_widen_ushiftl_hi_optab : vec_widen_sshiftl_hi_optab;
case VEC_WIDEN_LSHIFT_LO_EXPR:
return TYPE_UNSIGNED (type) ?
vec_widen_ushiftl_lo_optab : vec_widen_sshiftl_lo_optab;
case VEC_UNPACK_HI_EXPR:
return TYPE_UNSIGNED (type) ?
vec_unpacku_hi_optab : vec_unpacks_hi_optab;
case VEC_UNPACK_LO_EXPR:
return TYPE_UNSIGNED (type) ?
vec_unpacku_lo_optab : vec_unpacks_lo_optab;
case VEC_UNPACK_FLOAT_HI_EXPR:
/* The signedness is determined from input operand. */
return TYPE_UNSIGNED (type) ?
vec_unpacku_float_hi_optab : vec_unpacks_float_hi_optab;
case VEC_UNPACK_FLOAT_LO_EXPR:
/* The signedness is determined from input operand. */
return TYPE_UNSIGNED (type) ?
vec_unpacku_float_lo_optab : vec_unpacks_float_lo_optab;
case VEC_PACK_TRUNC_EXPR:
return vec_pack_trunc_optab;
case VEC_PACK_SAT_EXPR:
return TYPE_UNSIGNED (type) ? vec_pack_usat_optab : vec_pack_ssat_optab;
case VEC_PACK_FIX_TRUNC_EXPR:
/* The signedness is determined from output operand. */
return TYPE_UNSIGNED (type) ?
vec_pack_ufix_trunc_optab : vec_pack_sfix_trunc_optab;
default:
break;
}
trapv = INTEGRAL_TYPE_P (type) && TYPE_OVERFLOW_TRAPS (type);
switch (code)
{
case POINTER_PLUS_EXPR:
case PLUS_EXPR:
if (TYPE_SATURATING (type))
return TYPE_UNSIGNED (type) ? usadd_optab : ssadd_optab;
return trapv ? addv_optab : add_optab;
case MINUS_EXPR:
if (TYPE_SATURATING (type))
return TYPE_UNSIGNED (type) ? ussub_optab : sssub_optab;
return trapv ? subv_optab : sub_optab;
case MULT_EXPR:
if (TYPE_SATURATING (type))
return TYPE_UNSIGNED (type) ? usmul_optab : ssmul_optab;
return trapv ? smulv_optab : smul_optab;
case NEGATE_EXPR:
if (TYPE_SATURATING (type))
return TYPE_UNSIGNED (type) ? usneg_optab : ssneg_optab;
return trapv ? negv_optab : neg_optab;
case ABS_EXPR:
return trapv ? absv_optab : abs_optab;
default:
return unknown_optab;
}
}
/* Given optab UNOPTAB that reduces a vector to a scalar, find instead the old
optab that produces a vector with the reduction result in one element,
for a tree with type TYPE. */
optab
scalar_reduc_to_vector (optab unoptab, const_tree type)
{
switch (unoptab)
{
case reduc_plus_scal_optab:
return TYPE_UNSIGNED (type) ? reduc_uplus_optab : reduc_splus_optab;
case reduc_smin_scal_optab: return reduc_smin_optab;
case reduc_umin_scal_optab: return reduc_umin_optab;
case reduc_smax_scal_optab: return reduc_smax_optab;
case reduc_umax_scal_optab: return reduc_umax_optab;
default: return unknown_optab;
}
}
/* Expand vector widening operations.
There are two different classes of operations handled here:
1) Operations whose result is wider than all the arguments to the operation.
Examples: VEC_UNPACK_HI/LO_EXPR, VEC_WIDEN_MULT_HI/LO_EXPR
In this case OP0 and optionally OP1 would be initialized,
but WIDE_OP wouldn't (not relevant for this case).
2) Operations whose result is of the same size as the last argument to the
operation, but wider than all the other arguments to the operation.
Examples: WIDEN_SUM_EXPR, VEC_DOT_PROD_EXPR.
In the case WIDE_OP, OP0 and optionally OP1 would be initialized.
E.g, when called to expand the following operations, this is how
the arguments will be initialized:
nops OP0 OP1 WIDE_OP
widening-sum 2 oprnd0 - oprnd1
widening-dot-product 3 oprnd0 oprnd1 oprnd2
widening-mult 2 oprnd0 oprnd1 -
type-promotion (vec-unpack) 1 oprnd0 - - */
rtx
expand_widen_pattern_expr (sepops ops, rtx op0, rtx op1, rtx wide_op,
rtx target, int unsignedp)
{
struct expand_operand eops[4];
tree oprnd0, oprnd1, oprnd2;
machine_mode wmode = VOIDmode, tmode0, tmode1 = VOIDmode;
optab widen_pattern_optab;
enum insn_code icode;
int nops = TREE_CODE_LENGTH (ops->code);
int op;
oprnd0 = ops->op0;
tmode0 = TYPE_MODE (TREE_TYPE (oprnd0));
widen_pattern_optab =
optab_for_tree_code (ops->code, TREE_TYPE (oprnd0), optab_default);
if (ops->code == WIDEN_MULT_PLUS_EXPR
|| ops->code == WIDEN_MULT_MINUS_EXPR)
icode = find_widening_optab_handler (widen_pattern_optab,
TYPE_MODE (TREE_TYPE (ops->op2)),
tmode0, 0);
else
icode = optab_handler (widen_pattern_optab, tmode0);
gcc_assert (icode != CODE_FOR_nothing);
if (nops >= 2)
{
oprnd1 = ops->op1;
tmode1 = TYPE_MODE (TREE_TYPE (oprnd1));
}
/* The last operand is of a wider mode than the rest of the operands. */
if (nops == 2)
wmode = tmode1;
else if (nops == 3)
{
gcc_assert (tmode1 == tmode0);
gcc_assert (op1);
oprnd2 = ops->op2;
wmode = TYPE_MODE (TREE_TYPE (oprnd2));
}
op = 0;
create_output_operand (&eops[op++], target, TYPE_MODE (ops->type));
create_convert_operand_from (&eops[op++], op0, tmode0, unsignedp);
if (op1)
create_convert_operand_from (&eops[op++], op1, tmode1, unsignedp);
if (wide_op)
create_convert_operand_from (&eops[op++], wide_op, wmode, unsignedp);
expand_insn (icode, op, eops);
return eops[0].value;
}
/* Generate code to perform an operation specified by TERNARY_OPTAB
on operands OP0, OP1 and OP2, with result having machine-mode MODE.
UNSIGNEDP is for the case where we have to widen the operands
to perform the operation. It says to use zero-extension.
If TARGET is nonzero, the value
is generated there, if it is convenient to do so.
In all cases an rtx is returned for the locus of the value;
this may or may not be TARGET. */
rtx
expand_ternary_op (machine_mode mode, optab ternary_optab, rtx op0,
rtx op1, rtx op2, rtx target, int unsignedp)
{
struct expand_operand ops[4];
enum insn_code icode = optab_handler (ternary_optab, mode);
gcc_assert (optab_handler (ternary_optab, mode) != CODE_FOR_nothing);
create_output_operand (&ops[0], target, mode);
create_convert_operand_from (&ops[1], op0, mode, unsignedp);
create_convert_operand_from (&ops[2], op1, mode, unsignedp);
create_convert_operand_from (&ops[3], op2, mode, unsignedp);
expand_insn (icode, 4, ops);
return ops[0].value;
}
/* Like expand_binop, but return a constant rtx if the result can be
calculated at compile time. The arguments and return value are
otherwise the same as for expand_binop. */
rtx
simplify_expand_binop (machine_mode mode, optab binoptab,
rtx op0, rtx op1, rtx target, int unsignedp,
enum optab_methods methods)
{
if (CONSTANT_P (op0) && CONSTANT_P (op1))
{
rtx x = simplify_binary_operation (optab_to_code (binoptab),
mode, op0, op1);
if (x)
return x;
}
return expand_binop (mode, binoptab, op0, op1, target, unsignedp, methods);
}
/* Like simplify_expand_binop, but always put the result in TARGET.
Return true if the expansion succeeded. */
bool
force_expand_binop (machine_mode mode, optab binoptab,
rtx op0, rtx op1, rtx target, int unsignedp,
enum optab_methods methods)
{
rtx x = simplify_expand_binop (mode, binoptab, op0, op1,
target, unsignedp, methods);
if (x == 0)
return false;
if (x != target)
emit_move_insn (target, x);
return true;
}
/* Create a new vector value in VMODE with all elements set to OP. The
mode of OP must be the element mode of VMODE. If OP is a constant,
then the return value will be a constant. */
static rtx
expand_vector_broadcast (machine_mode vmode, rtx op)
{
enum insn_code icode;
rtvec vec;
rtx ret;
int i, n;
gcc_checking_assert (VECTOR_MODE_P (vmode));
n = GET_MODE_NUNITS (vmode);
vec = rtvec_alloc (n);
for (i = 0; i < n; ++i)
RTVEC_ELT (vec, i) = op;
if (CONSTANT_P (op))
return gen_rtx_CONST_VECTOR (vmode, vec);
/* ??? If the target doesn't have a vec_init, then we have no easy way
of performing this operation. Most of this sort of generic support
is hidden away in the vector lowering support in gimple. */
icode = optab_handler (vec_init_optab, vmode);
if (icode == CODE_FOR_nothing)
return NULL;
ret = gen_reg_rtx (vmode);
emit_insn (GEN_FCN (icode) (ret, gen_rtx_PARALLEL (vmode, vec)));
return ret;
}
/* This subroutine of expand_doubleword_shift handles the cases in which
the effective shift value is >= BITS_PER_WORD. The arguments and return
value are the same as for the parent routine, except that SUPERWORD_OP1
is the shift count to use when shifting OUTOF_INPUT into INTO_TARGET.
INTO_TARGET may be null if the caller has decided to calculate it. */
static bool
expand_superword_shift (optab binoptab, rtx outof_input, rtx superword_op1,
rtx outof_target, rtx into_target,
int unsignedp, enum optab_methods methods)
{
if (into_target != 0)
if (!force_expand_binop (word_mode, binoptab, outof_input, superword_op1,
into_target, unsignedp, methods))
return false;
if (outof_target != 0)
{
/* For a signed right shift, we must fill OUTOF_TARGET with copies
of the sign bit, otherwise we must fill it with zeros. */
if (binoptab != ashr_optab)
emit_move_insn (outof_target, CONST0_RTX (word_mode));
else
if (!force_expand_binop (word_mode, binoptab,
outof_input, GEN_INT (BITS_PER_WORD - 1),
outof_target, unsignedp, methods))
return false;
}
return true;
}
/* This subroutine of expand_doubleword_shift handles the cases in which
the effective shift value is < BITS_PER_WORD. The arguments and return
value are the same as for the parent routine. */
static bool
expand_subword_shift (machine_mode op1_mode, optab binoptab,
rtx outof_input, rtx into_input, rtx op1,
rtx outof_target, rtx into_target,
int unsignedp, enum optab_methods methods,
unsigned HOST_WIDE_INT shift_mask)
{
optab reverse_unsigned_shift, unsigned_shift;
rtx tmp, carries;
reverse_unsigned_shift = (binoptab == ashl_optab ? lshr_optab : ashl_optab);
unsigned_shift = (binoptab == ashl_optab ? ashl_optab : lshr_optab);
/* The low OP1 bits of INTO_TARGET come from the high bits of OUTOF_INPUT.
We therefore need to shift OUTOF_INPUT by (BITS_PER_WORD - OP1) bits in
the opposite direction to BINOPTAB. */
if (CONSTANT_P (op1) || shift_mask >= BITS_PER_WORD)
{
carries = outof_input;
tmp = immed_wide_int_const (wi::shwi (BITS_PER_WORD,
op1_mode), op1_mode);
tmp = simplify_expand_binop (op1_mode, sub_optab, tmp, op1,
0, true, methods);
}
else
{
/* We must avoid shifting by BITS_PER_WORD bits since that is either
the same as a zero shift (if shift_mask == BITS_PER_WORD - 1) or
has unknown behavior. Do a single shift first, then shift by the
remainder. It's OK to use ~OP1 as the remainder if shift counts
are truncated to the mode size. */
carries = expand_binop (word_mode, reverse_unsigned_shift,
outof_input, const1_rtx, 0, unsignedp, methods);
if (shift_mask == BITS_PER_WORD - 1)
{
tmp = immed_wide_int_const
(wi::minus_one (GET_MODE_PRECISION (op1_mode)), op1_mode);
tmp = simplify_expand_binop (op1_mode, xor_optab, op1, tmp,
0, true, methods);
}
else
{
tmp = immed_wide_int_const (wi::shwi (BITS_PER_WORD - 1,
op1_mode), op1_mode);
tmp = simplify_expand_binop (op1_mode, sub_optab, tmp, op1,
0, true, methods);
}
}
if (tmp == 0 || carries == 0)
return false;
carries = expand_binop (word_mode, reverse_unsigned_shift,
carries, tmp, 0, unsignedp, methods);
if (carries == 0)
return false;
/* Shift INTO_INPUT logically by OP1. This is the last use of INTO_INPUT
so the result can go directly into INTO_TARGET if convenient. */
tmp = expand_binop (word_mode, unsigned_shift, into_input, op1,
into_target, unsignedp, methods);
if (tmp == 0)
return false;
/* Now OR in the bits carried over from OUTOF_INPUT. */
if (!force_expand_binop (word_mode, ior_optab, tmp, carries,
into_target, unsignedp, methods))
return false;
/* Use a standard word_mode shift for the out-of half. */
if (outof_target != 0)
if (!force_expand_binop (word_mode, binoptab, outof_input, op1,
outof_target, unsignedp, methods))
return false;
return true;
}
#ifdef HAVE_conditional_move
/* Try implementing expand_doubleword_shift using conditional moves.
The shift is by < BITS_PER_WORD if (CMP_CODE CMP1 CMP2) is true,
otherwise it is by >= BITS_PER_WORD. SUBWORD_OP1 and SUPERWORD_OP1
are the shift counts to use in the former and latter case. All other
arguments are the same as the parent routine. */
static bool
expand_doubleword_shift_condmove (machine_mode op1_mode, optab binoptab,
enum rtx_code cmp_code, rtx cmp1, rtx cmp2,
rtx outof_input, rtx into_input,
rtx subword_op1, rtx superword_op1,
rtx outof_target, rtx into_target,
int unsignedp, enum optab_methods methods,
unsigned HOST_WIDE_INT shift_mask)
{
rtx outof_superword, into_superword;
/* Put the superword version of the output into OUTOF_SUPERWORD and
INTO_SUPERWORD. */
outof_superword = outof_target != 0 ? gen_reg_rtx (word_mode) : 0;
if (outof_target != 0 && subword_op1 == superword_op1)
{
/* The value INTO_TARGET >> SUBWORD_OP1, which we later store in
OUTOF_TARGET, is the same as the value of INTO_SUPERWORD. */
into_superword = outof_target;
if (!expand_superword_shift (binoptab, outof_input, superword_op1,
outof_superword, 0, unsignedp, methods))
return false;
}
else
{
into_superword = gen_reg_rtx (word_mode);
if (!expand_superword_shift (binoptab, outof_input, superword_op1,
outof_superword, into_superword,
unsignedp, methods))
return false;
}
/* Put the subword version directly in OUTOF_TARGET and INTO_TARGET. */
if (!expand_subword_shift (op1_mode, binoptab,
outof_input, into_input, subword_op1,
outof_target, into_target,
unsignedp, methods, shift_mask))
return false;
/* Select between them. Do the INTO half first because INTO_SUPERWORD
might be the current value of OUTOF_TARGET. */
if (!emit_conditional_move (into_target, cmp_code, cmp1, cmp2, op1_mode,
into_target, into_superword, word_mode, false))
return false;
if (outof_target != 0)
if (!emit_conditional_move (outof_target, cmp_code, cmp1, cmp2, op1_mode,
outof_target, outof_superword,
word_mode, false))
return false;
return true;
}
#endif
/* Expand a doubleword shift (ashl, ashr or lshr) using word-mode shifts.
OUTOF_INPUT and INTO_INPUT are the two word-sized halves of the first
input operand; the shift moves bits in the direction OUTOF_INPUT->
INTO_TARGET. OUTOF_TARGET and INTO_TARGET are the equivalent words
of the target. OP1 is the shift count and OP1_MODE is its mode.
If OP1 is constant, it will have been truncated as appropriate
and is known to be nonzero.
If SHIFT_MASK is zero, the result of word shifts is undefined when the
shift count is outside the range [0, BITS_PER_WORD). This routine must
avoid generating such shifts for OP1s in the range [0, BITS_PER_WORD * 2).
If SHIFT_MASK is nonzero, all word-mode shift counts are effectively
masked by it and shifts in the range [BITS_PER_WORD, SHIFT_MASK) will
fill with zeros or sign bits as appropriate.
If SHIFT_MASK is BITS_PER_WORD - 1, this routine will synthesize
a doubleword shift whose equivalent mask is BITS_PER_WORD * 2 - 1.
Doing this preserves semantics required by SHIFT_COUNT_TRUNCATED.
In all other cases, shifts by values outside [0, BITS_PER_UNIT * 2)
are undefined.
BINOPTAB, UNSIGNEDP and METHODS are as for expand_binop. This function
may not use INTO_INPUT after modifying INTO_TARGET, and similarly for
OUTOF_INPUT and OUTOF_TARGET. OUTOF_TARGET can be null if the parent
function wants to calculate it itself.
Return true if the shift could be successfully synthesized. */
static bool
expand_doubleword_shift (machine_mode op1_mode, optab binoptab,
rtx outof_input, rtx into_input, rtx op1,
rtx outof_target, rtx into_target,
int unsignedp, enum optab_methods methods,
unsigned HOST_WIDE_INT shift_mask)
{
rtx superword_op1, tmp, cmp1, cmp2;
enum rtx_code cmp_code;
/* See if word-mode shifts by BITS_PER_WORD...BITS_PER_WORD * 2 - 1 will
fill the result with sign or zero bits as appropriate. If so, the value
of OUTOF_TARGET will always be (SHIFT OUTOF_INPUT OP1). Recursively call
this routine to calculate INTO_TARGET (which depends on both OUTOF_INPUT
and INTO_INPUT), then emit code to set up OUTOF_TARGET.
This isn't worthwhile for constant shifts since the optimizers will
cope better with in-range shift counts. */
if (shift_mask >= BITS_PER_WORD
&& outof_target != 0
&& !CONSTANT_P (op1))
{
if (!expand_doubleword_shift (op1_mode, binoptab,
outof_input, into_input, op1,
0, into_target,
unsignedp, methods, shift_mask))
return false;
if (!force_expand_binop (word_mode, binoptab, outof_input, op1,
outof_target, unsignedp, methods))
return false;
return true;
}
/* Set CMP_CODE, CMP1 and CMP2 so that the rtx (CMP_CODE CMP1 CMP2)
is true when the effective shift value is less than BITS_PER_WORD.
Set SUPERWORD_OP1 to the shift count that should be used to shift
OUTOF_INPUT into INTO_TARGET when the condition is false. */
tmp = immed_wide_int_const (wi::shwi (BITS_PER_WORD, op1_mode), op1_mode);
if (!CONSTANT_P (op1) && shift_mask == BITS_PER_WORD - 1)
{
/* Set CMP1 to OP1 & BITS_PER_WORD. The result is zero iff OP1
is a subword shift count. */
cmp1 = simplify_expand_binop (op1_mode, and_optab, op1, tmp,
0, true, methods);
cmp2 = CONST0_RTX (op1_mode);
cmp_code = EQ;
superword_op1 = op1;
}
else
{
/* Set CMP1 to OP1 - BITS_PER_WORD. */
cmp1 = simplify_expand_binop (op1_mode, sub_optab, op1, tmp,
0, true, methods);
cmp2 = CONST0_RTX (op1_mode);
cmp_code = LT;
superword_op1 = cmp1;
}
if (cmp1 == 0)
return false;
/* If we can compute the condition at compile time, pick the
appropriate subroutine. */
tmp = simplify_relational_operation (cmp_code, SImode, op1_mode, cmp1, cmp2);
if (tmp != 0 && CONST_INT_P (tmp))
{
if (tmp == const0_rtx)
return expand_superword_shift (binoptab, outof_input, superword_op1,
outof_target, into_target,
unsignedp, methods);
else
return expand_subword_shift (op1_mode, binoptab,
outof_input, into_input, op1,
outof_target, into_target,
unsignedp, methods, shift_mask);
}
#ifdef HAVE_conditional_move
/* Try using conditional moves to generate straight-line code. */
{
rtx_insn *start = get_last_insn ();
if (expand_doubleword_shift_condmove (op1_mode, binoptab,
cmp_code, cmp1, cmp2,
outof_input, into_input,
op1, superword_op1,
outof_target, into_target,
unsignedp, methods, shift_mask))
return true;
delete_insns_since (start);
}
#endif
/* As a last resort, use branches to select the correct alternative. */
rtx_code_label *subword_label = gen_label_rtx ();
rtx_code_label *done_label = gen_label_rtx ();
NO_DEFER_POP;
do_compare_rtx_and_jump (cmp1, cmp2, cmp_code, false, op1_mode,
0, 0, subword_label, -1);
OK_DEFER_POP;
if (!expand_superword_shift (binoptab, outof_input, superword_op1,
outof_target, into_target,
unsignedp, methods))
return false;
emit_jump_insn (gen_jump (done_label));
emit_barrier ();
emit_label (subword_label);
if (!expand_subword_shift (op1_mode, binoptab,
outof_input, into_input, op1,
outof_target, into_target,
unsignedp, methods, shift_mask))
return false;
emit_label (done_label);
return true;
}
/* Subroutine of expand_binop. Perform a double word multiplication of
operands OP0 and OP1 both of mode MODE, which is exactly twice as wide
as the target's word_mode. This function return NULL_RTX if anything
goes wrong, in which case it may have already emitted instructions
which need to be deleted.
If we want to multiply two two-word values and have normal and widening
multiplies of single-word values, we can do this with three smaller
multiplications.
The multiplication proceeds as follows:
_______________________
[__op0_high_|__op0_low__]
_______________________
* [__op1_high_|__op1_low__]
_______________________________________________
_______________________
(1) [__op0_low__*__op1_low__]
_______________________
(2a) [__op0_low__*__op1_high_]
_______________________
(2b) [__op0_high_*__op1_low__]
_______________________
(3) [__op0_high_*__op1_high_]
This gives a 4-word result. Since we are only interested in the
lower 2 words, partial result (3) and the upper words of (2a) and
(2b) don't need to be calculated. Hence (2a) and (2b) can be
calculated using non-widening multiplication.
(1), however, needs to be calculated with an unsigned widening
multiplication. If this operation is not directly supported we
try using a signed widening multiplication and adjust the result.
This adjustment works as follows:
If both operands are positive then no adjustment is needed.
If the operands have different signs, for example op0_low < 0 and
op1_low >= 0, the instruction treats the most significant bit of
op0_low as a sign bit instead of a bit with significance
2**(BITS_PER_WORD-1), i.e. the instruction multiplies op1_low
with 2**BITS_PER_WORD - op0_low, and two's complements the
result. Conclusion: We need to add op1_low * 2**BITS_PER_WORD to
the result.
Similarly, if both operands are negative, we need to add
(op0_low + op1_low) * 2**BITS_PER_WORD.
We use a trick to adjust quickly. We logically shift op0_low right
(op1_low) BITS_PER_WORD-1 steps to get 0 or 1, and add this to
op0_high (op1_high) before it is used to calculate 2b (2a). If no
logical shift exists, we do an arithmetic right shift and subtract
the 0 or -1. */
static rtx
expand_doubleword_mult (machine_mode mode, rtx op0, rtx op1, rtx target,
bool umulp, enum optab_methods methods)
{
int low = (WORDS_BIG_ENDIAN ? 1 : 0);
int high = (WORDS_BIG_ENDIAN ? 0 : 1);
rtx wordm1 = umulp ? NULL_RTX : GEN_INT (BITS_PER_WORD - 1);
rtx product, adjust, product_high, temp;
rtx op0_high = operand_subword_force (op0, high, mode);
rtx op0_low = operand_subword_force (op0, low, mode);
rtx op1_high = operand_subword_force (op1, high, mode);
rtx op1_low = operand_subword_force (op1, low, mode);
/* If we're using an unsigned multiply to directly compute the product
of the low-order words of the operands and perform any required
adjustments of the operands, we begin by trying two more multiplications
and then computing the appropriate sum.
We have checked above that the required addition is provided.
Full-word addition will normally always succeed, especially if
it is provided at all, so we don't worry about its failure. The
multiplication may well fail, however, so we do handle that. */
if (!umulp)
{
/* ??? This could be done with emit_store_flag where available. */
temp = expand_binop (word_mode, lshr_optab, op0_low, wordm1,
NULL_RTX, 1, methods);
if (temp)
op0_high = expand_binop (word_mode, add_optab, op0_high, temp,
NULL_RTX, 0, OPTAB_DIRECT);
else
{
temp = expand_binop (word_mode, ashr_optab, op0_low, wordm1,
NULL_RTX, 0, methods);
if (!temp)
return NULL_RTX;
op0_high = expand_binop (word_mode, sub_optab, op0_high, temp,
NULL_RTX, 0, OPTAB_DIRECT);
}
if (!op0_high)
return NULL_RTX;
}
adjust = expand_binop (word_mode, smul_optab, op0_high, op1_low,
NULL_RTX, 0, OPTAB_DIRECT);
if (!adjust)
return NULL_RTX;
/* OP0_HIGH should now be dead. */
if (!umulp)
{
/* ??? This could be done with emit_store_flag where available. */
temp = expand_binop (word_mode, lshr_optab, op1_low, wordm1,
NULL_RTX, 1, methods);
if (temp)
op1_high = expand_binop (word_mode, add_optab, op1_high, temp,
NULL_RTX, 0, OPTAB_DIRECT);
else
{
temp = expand_binop (word_mode, ashr_optab, op1_low, wordm1,
NULL_RTX, 0, methods);
if (!temp)
return NULL_RTX;
op1_high = expand_binop (word_mode, sub_optab, op1_high, temp,
NULL_RTX, 0, OPTAB_DIRECT);
}
if (!op1_high)
return NULL_RTX;
}
temp = expand_binop (word_mode, smul_optab, op1_high, op0_low,
NULL_RTX, 0, OPTAB_DIRECT);
if (!temp)
return NULL_RTX;
/* OP1_HIGH should now be dead. */
adjust = expand_binop (word_mode, add_optab, adjust, temp,
NULL_RTX, 0, OPTAB_DIRECT);
if (target && !REG_P (target))
target = NULL_RTX;
if (umulp)
product = expand_binop (mode, umul_widen_optab, op0_low, op1_low,
target, 1, OPTAB_DIRECT);
else
product = expand_binop (mode, smul_widen_optab, op0_low, op1_low,
target, 1, OPTAB_DIRECT);
if (!product)
return NULL_RTX;
product_high = operand_subword (product, high, 1, mode);
adjust = expand_binop (word_mode, add_optab, product_high, adjust,
NULL_RTX, 0, OPTAB_DIRECT);
emit_move_insn (product_high, adjust);
return product;
}
/* Wrapper around expand_binop which takes an rtx code to specify
the operation to perform, not an optab pointer. All other
arguments are the same. */
rtx
expand_simple_binop (machine_mode mode, enum rtx_code code, rtx op0,
rtx op1, rtx target, int unsignedp,
enum optab_methods methods)
{
optab binop = code_to_optab (code);
gcc_assert (binop);
return expand_binop (mode, binop, op0, op1, target, unsignedp, methods);
}
/* Return whether OP0 and OP1 should be swapped when expanding a commutative
binop. Order them according to commutative_operand_precedence and, if
possible, try to put TARGET or a pseudo first. */
static bool
swap_commutative_operands_with_target (rtx target, rtx op0, rtx op1)
{
int op0_prec = commutative_operand_precedence (op0);
int op1_prec = commutative_operand_precedence (op1);
if (op0_prec < op1_prec)
return true;
if (op0_prec > op1_prec)
return false;
/* With equal precedence, both orders are ok, but it is better if the
first operand is TARGET, or if both TARGET and OP0 are pseudos. */
if (target == 0 || REG_P (target))
return (REG_P (op1) && !REG_P (op0)) || target == op1;
else
return rtx_equal_p (op1, target);
}
/* Return true if BINOPTAB implements a shift operation. */
static bool
shift_optab_p (optab binoptab)
{
switch (optab_to_code (binoptab))
{
case ASHIFT:
case SS_ASHIFT:
case US_ASHIFT:
case ASHIFTRT:
case LSHIFTRT:
case ROTATE:
case ROTATERT:
return true;
default:
return false;
}
}
/* Return true if BINOPTAB implements a commutative binary operation. */
static bool
commutative_optab_p (optab binoptab)
{
return (GET_RTX_CLASS (optab_to_code (binoptab)) == RTX_COMM_ARITH
|| binoptab == smul_widen_optab
|| binoptab == umul_widen_optab
|| binoptab == smul_highpart_optab
|| binoptab == umul_highpart_optab);
}
/* X is to be used in mode MODE as operand OPN to BINOPTAB. If we're
optimizing, and if the operand is a constant that costs more than
1 instruction, force the constant into a register and return that
register. Return X otherwise. UNSIGNEDP says whether X is unsigned. */
static rtx
avoid_expensive_constant (machine_mode mode, optab binoptab,
int opn, rtx x, bool unsignedp)
{
bool speed = optimize_insn_for_speed_p ();
if (mode != VOIDmode
&& optimize
&& CONSTANT_P (x)
&& (rtx_cost (x, optab_to_code (binoptab), opn, speed)
> set_src_cost (x, speed)))
{
if (CONST_INT_P (x))
{
HOST_WIDE_INT intval = trunc_int_for_mode (INTVAL (x), mode);
if (intval != INTVAL (x))
x = GEN_INT (intval);
}
else
x = convert_modes (mode, VOIDmode, x, unsignedp);
x = force_reg (mode, x);
}
return x;
}
/* Helper function for expand_binop: handle the case where there
is an insn that directly implements the indicated operation.
Returns null if this is not possible. */
static rtx
expand_binop_directly (machine_mode mode, optab binoptab,
rtx op0, rtx op1,
rtx target, int unsignedp, enum optab_methods methods,
rtx_insn *last)
{
machine_mode from_mode = widened_mode (mode, op0, op1);
enum insn_code icode = find_widening_optab_handler (binoptab, mode,
from_mode, 1);
machine_mode xmode0 = insn_data[(int) icode].operand[1].mode;
machine_mode xmode1 = insn_data[(int) icode].operand[2].mode;
machine_mode mode0, mode1, tmp_mode;
struct expand_operand ops[3];
bool commutative_p;
rtx pat;
rtx xop0 = op0, xop1 = op1;
rtx swap;
/* If it is a commutative operator and the modes would match
if we would swap the operands, we can save the conversions. */
commutative_p = commutative_optab_p (binoptab);
if (commutative_p
&& GET_MODE (xop0) != xmode0 && GET_MODE (xop1) != xmode1
&& GET_MODE (xop0) == xmode1 && GET_MODE (xop1) == xmode1)
{
swap = xop0;
xop0 = xop1;
xop1 = swap;
}
/* If we are optimizing, force expensive constants into a register. */
xop0 = avoid_expensive_constant (xmode0, binoptab, 0, xop0, unsignedp);
if (!shift_optab_p (binoptab))
xop1 = avoid_expensive_constant (xmode1, binoptab, 1, xop1, unsignedp);
/* In case the insn wants input operands in modes different from
those of the actual operands, convert the operands. It would
seem that we don't need to convert CONST_INTs, but we do, so
that they're properly zero-extended, sign-extended or truncated
for their mode. */
mode0 = GET_MODE (xop0) != VOIDmode ? GET_MODE (xop0) : mode;
if (xmode0 != VOIDmode && xmode0 != mode0)
{
xop0 = convert_modes (xmode0, mode0, xop0, unsignedp);
mode0 = xmode0;
}
mode1 = GET_MODE (xop1) != VOIDmode ? GET_MODE (xop1) : mode;
if (xmode1 != VOIDmode && xmode1 != mode1)
{
xop1 = convert_modes (xmode1, mode1, xop1, unsignedp);
mode1 = xmode1;
}
/* If operation is commutative,
try to make the first operand a register.
Even better, try to make it the same as the target.
Also try to make the last operand a constant. */
if (commutative_p
&& swap_commutative_operands_with_target (target, xop0, xop1))
{
swap = xop1;
xop1 = xop0;
xop0 = swap;
}
/* Now, if insn's predicates don't allow our operands, put them into
pseudo regs. */
if (binoptab == vec_pack_trunc_optab
|| binoptab == vec_pack_usat_optab
|| binoptab == vec_pack_ssat_optab
|| binoptab == vec_pack_ufix_trunc_optab
|| binoptab == vec_pack_sfix_trunc_optab)
{
/* The mode of the result is different then the mode of the
arguments. */
tmp_mode = insn_data[(int) icode].operand[0].mode;
if (GET_MODE_NUNITS (tmp_mode) != 2 * GET_MODE_NUNITS (mode))
{
delete_insns_since (last);
return NULL_RTX;
}
}
else
tmp_mode = mode;
create_output_operand (&ops[0], target, tmp_mode);
create_input_operand (&ops[1], xop0, mode0);
create_input_operand (&ops[2], xop1, mode1);
pat = maybe_gen_insn (icode, 3, ops);
if (pat)
{
/* If PAT is composed of more than one insn, try to add an appropriate
REG_EQUAL note to it. If we can't because TEMP conflicts with an
operand, call expand_binop again, this time without a target. */
if (INSN_P (pat) && NEXT_INSN (as_a (pat)) != NULL_RTX
&& ! add_equal_note (as_a (pat), ops[0].value,
optab_to_code (binoptab),
ops[1].value, ops[2].value))
{
delete_insns_since (last);
return expand_binop (mode, binoptab, op0, op1, NULL_RTX,
unsignedp, methods);
}
emit_insn (pat);
return ops[0].value;
}
delete_insns_since (last);
return NULL_RTX;
}
/* Generate code to perform an operation specified by BINOPTAB
on operands OP0 and OP1, with result having machine-mode MODE.
UNSIGNEDP is for the case where we have to widen the operands
to perform the operation. It says to use zero-extension.
If TARGET is nonzero, the value
is generated there, if it is convenient to do so.
In all cases an rtx is returned for the locus of the value;
this may or may not be TARGET. */
rtx
expand_binop (machine_mode mode, optab binoptab, rtx op0, rtx op1,
rtx target, int unsignedp, enum optab_methods methods)
{
enum optab_methods next_methods
= (methods == OPTAB_LIB || methods == OPTAB_LIB_WIDEN
? OPTAB_WIDEN : methods);
enum mode_class mclass;
machine_mode wider_mode;
rtx libfunc;
rtx temp;
rtx_insn *entry_last = get_last_insn ();
rtx_insn *last;
mclass = GET_MODE_CLASS (mode);
/* If subtracting an integer constant, convert this into an addition of
the negated constant. */
if (binoptab == sub_optab && CONST_INT_P (op1))
{
op1 = negate_rtx (mode, op1);
binoptab = add_optab;
}
/* Record where to delete back to if we backtrack. */
last = get_last_insn ();
/* If we can do it with a three-operand insn, do so. */
if (methods != OPTAB_MUST_WIDEN
&& find_widening_optab_handler (binoptab, mode,
widened_mode (mode, op0, op1), 1)
!= CODE_FOR_nothing)
{
temp = expand_binop_directly (mode, binoptab, op0, op1, target,
unsignedp, methods, last);
if (temp)
return temp;
}
/* If we were trying to rotate, and that didn't work, try rotating
the other direction before falling back to shifts and bitwise-or. */
if (((binoptab == rotl_optab
&& optab_handler (rotr_optab, mode) != CODE_FOR_nothing)
|| (binoptab == rotr_optab
&& optab_handler (rotl_optab, mode) != CODE_FOR_nothing))
&& mclass == MODE_INT)
{
optab otheroptab = (binoptab == rotl_optab ? rotr_optab : rotl_optab);
rtx newop1;
unsigned int bits = GET_MODE_PRECISION (mode);
if (CONST_INT_P (op1))
newop1 = GEN_INT (bits - INTVAL (op1));
else if (targetm.shift_truncation_mask (mode) == bits - 1)
newop1 = negate_rtx (GET_MODE (op1), op1);
else
newop1 = expand_binop (GET_MODE (op1), sub_optab,
gen_int_mode (bits, GET_MODE (op1)), op1,
NULL_RTX, unsignedp, OPTAB_DIRECT);
temp = expand_binop_directly (mode, otheroptab, op0, newop1,
target, unsignedp, methods, last);
if (temp)
return temp;
}
/* If this is a multiply, see if we can do a widening operation that
takes operands of this mode and makes a wider mode. */
if (binoptab == smul_optab
&& GET_MODE_2XWIDER_MODE (mode) != VOIDmode
&& (widening_optab_handler ((unsignedp ? umul_widen_optab
: smul_widen_optab),
GET_MODE_2XWIDER_MODE (mode), mode)
!= CODE_FOR_nothing))
{
temp = expand_binop (GET_MODE_2XWIDER_MODE (mode),
unsignedp ? umul_widen_optab : smul_widen_optab,
op0, op1, NULL_RTX, unsignedp, OPTAB_DIRECT);
if (temp != 0)
{
if (GET_MODE_CLASS (mode) == MODE_INT
&& TRULY_NOOP_TRUNCATION_MODES_P (mode, GET_MODE (temp)))
return gen_lowpart (mode, temp);
else
return convert_to_mode (mode, temp, unsignedp);
}
}
/* If this is a vector shift by a scalar, see if we can do a vector
shift by a vector. If so, broadcast the scalar into a vector. */
if (mclass == MODE_VECTOR_INT)
{
optab otheroptab = unknown_optab;
if (binoptab == ashl_optab)
otheroptab = vashl_optab;
else if (binoptab == ashr_optab)
otheroptab = vashr_optab;
else if (binoptab == lshr_optab)
otheroptab = vlshr_optab;
else if (binoptab == rotl_optab)
otheroptab = vrotl_optab;
else if (binoptab == rotr_optab)
otheroptab = vrotr_optab;
if (otheroptab && optab_handler (otheroptab, mode) != CODE_FOR_nothing)
{
rtx vop1 = expand_vector_broadcast (mode, op1);
if (vop1)
{
temp = expand_binop_directly (mode, otheroptab, op0, vop1,
target, unsignedp, methods, last);
if (temp)
return temp;
}
}
}
/* Look for a wider mode of the same class for which we think we
can open-code the operation. Check for a widening multiply at the
wider mode as well. */
if (CLASS_HAS_WIDER_MODES_P (mclass)
&& methods != OPTAB_DIRECT && methods != OPTAB_LIB)
for (wider_mode = GET_MODE_WIDER_MODE (mode);
wider_mode != VOIDmode;
wider_mode = GET_MODE_WIDER_MODE (wider_mode))
{
if (optab_handler (binoptab, wider_mode) != CODE_FOR_nothing
|| (binoptab == smul_optab
&& GET_MODE_WIDER_MODE (wider_mode) != VOIDmode
&& (find_widening_optab_handler ((unsignedp
? umul_widen_optab
: smul_widen_optab),
GET_MODE_WIDER_MODE (wider_mode),
mode, 0)
!= CODE_FOR_nothing)))
{
rtx xop0 = op0, xop1 = op1;
int no_extend = 0;
/* For certain integer operations, we need not actually extend
the narrow operands, as long as we will truncate
the results to the same narrowness. */
if ((binoptab == ior_optab || binoptab == and_optab
|| binoptab == xor_optab
|| binoptab == add_optab || binoptab == sub_optab
|| binoptab == smul_optab || binoptab == ashl_optab)
&& mclass == MODE_INT)
{
no_extend = 1;
xop0 = avoid_expensive_constant (mode, binoptab, 0,
xop0, unsignedp);
if (binoptab != ashl_optab)
xop1 = avoid_expensive_constant (mode, binoptab, 1,
xop1, unsignedp);
}
xop0 = widen_operand (xop0, wider_mode, mode, unsignedp, no_extend);
/* The second operand of a shift must always be extended. */
xop1 = widen_operand (xop1, wider_mode, mode, unsignedp,
no_extend && binoptab != ashl_optab);
temp = expand_binop (wider_mode, binoptab, xop0, xop1, NULL_RTX,
unsignedp, OPTAB_DIRECT);
if (temp)
{
if (mclass != MODE_INT
|| !TRULY_NOOP_TRUNCATION_MODES_P (mode, wider_mode))
{
if (target == 0)
target = gen_reg_rtx (mode);
convert_move (target, temp, 0);
return target;
}
else
return gen_lowpart (mode, temp);
}
else
delete_insns_since (last);
}
}
/* If operation is commutative,
try to make the first operand a register.
Even better, try to make it the same as the target.
Also try to make the last operand a constant. */
if (commutative_optab_p (binoptab)
&& swap_commutative_operands_with_target (target, op0, op1))
{
temp = op1;
op1 = op0;
op0 = temp;
}
/* These can be done a word at a time. */
if ((binoptab == and_optab || binoptab == ior_optab || binoptab == xor_optab)
&& mclass == MODE_INT
&& GET_MODE_SIZE (mode) > UNITS_PER_WORD
&& optab_handler (binoptab, word_mode) != CODE_FOR_nothing)
{
int i;
rtx_insn *insns;
/* If TARGET is the same as one of the operands, the REG_EQUAL note
won't be accurate, so use a new target. */
if (target == 0
|| target == op0
|| target == op1
|| !valid_multiword_target_p (target))
target = gen_reg_rtx (mode);
start_sequence ();
/* Do the actual arithmetic. */
for (i = 0; i < GET_MODE_BITSIZE (mode) / BITS_PER_WORD; i++)
{
rtx target_piece = operand_subword (target, i, 1, mode);
rtx x = expand_binop (word_mode, binoptab,
operand_subword_force (op0, i, mode),
operand_subword_force (op1, i, mode),
target_piece, unsignedp, next_methods);
if (x == 0)
break;
if (target_piece != x)
emit_move_insn (target_piece, x);
}
insns = get_insns ();
end_sequence ();
if (i == GET_MODE_BITSIZE (mode) / BITS_PER_WORD)
{
emit_insn (insns);
return target;
}
}
/* Synthesize double word shifts from single word shifts. */
if ((binoptab == lshr_optab || binoptab == ashl_optab
|| binoptab == ashr_optab)
&& mclass == MODE_INT
&& (CONST_INT_P (op1) || optimize_insn_for_speed_p ())
&& GET_MODE_SIZE (mode) == 2 * UNITS_PER_WORD
&& GET_MODE_PRECISION (mode) == GET_MODE_BITSIZE (mode)
&& optab_handler (binoptab, word_mode) != CODE_FOR_nothing
&& optab_handler (ashl_optab, word_mode) != CODE_FOR_nothing
&& optab_handler (lshr_optab, word_mode) != CODE_FOR_nothing)
{
unsigned HOST_WIDE_INT shift_mask, double_shift_mask;
machine_mode op1_mode;
double_shift_mask = targetm.shift_truncation_mask (mode);
shift_mask = targetm.shift_truncation_mask (word_mode);
op1_mode = GET_MODE (op1) != VOIDmode ? GET_MODE (op1) : word_mode;
/* Apply the truncation to constant shifts. */
if (double_shift_mask > 0 && CONST_INT_P (op1))
op1 = GEN_INT (INTVAL (op1) & double_shift_mask);
if (op1 == CONST0_RTX (op1_mode))
return op0;
/* Make sure that this is a combination that expand_doubleword_shift
can handle. See the comments there for details. */
if (double_shift_mask == 0
|| (shift_mask == BITS_PER_WORD - 1
&& double_shift_mask == BITS_PER_WORD * 2 - 1))
{
rtx_insn *insns;
rtx into_target, outof_target;
rtx into_input, outof_input;
int left_shift, outof_word;
/* If TARGET is the same as one of the operands, the REG_EQUAL note
won't be accurate, so use a new target. */
if (target == 0
|| target == op0
|| target == op1
|| !valid_multiword_target_p (target))
target = gen_reg_rtx (mode);
start_sequence ();
/* OUTOF_* is the word we are shifting bits away from, and
INTO_* is the word that we are shifting bits towards, thus
they differ depending on the direction of the shift and
WORDS_BIG_ENDIAN. */
left_shift = binoptab == ashl_optab;
outof_word = left_shift ^ ! WORDS_BIG_ENDIAN;
outof_target = operand_subword (target, outof_word, 1, mode);
into_target = operand_subword (target, 1 - outof_word, 1, mode);
outof_input = operand_subword_force (op0, outof_word, mode);
into_input = operand_subword_force (op0, 1 - outof_word, mode);
if (expand_doubleword_shift (op1_mode, binoptab,
outof_input, into_input, op1,
outof_target, into_target,
unsignedp, next_methods, shift_mask))
{
insns = get_insns ();
end_sequence ();
emit_insn (insns);
return target;
}
end_sequence ();
}
}
/* Synthesize double word rotates from single word shifts. */
if ((binoptab == rotl_optab || binoptab == rotr_optab)
&& mclass == MODE_INT
&& CONST_INT_P (op1)
&& GET_MODE_PRECISION (mode) == 2 * BITS_PER_WORD
&& optab_handler (ashl_optab, word_mode) != CODE_FOR_nothing
&& optab_handler (lshr_optab, word_mode) != CODE_FOR_nothing)
{
rtx_insn *insns;
rtx into_target, outof_target;
rtx into_input, outof_input;
rtx inter;
int shift_count, left_shift, outof_word;
/* If TARGET is the same as one of the operands, the REG_EQUAL note
won't be accurate, so use a new target. Do this also if target is not
a REG, first because having a register instead may open optimization
opportunities, and second because if target and op0 happen to be MEMs
designating the same location, we would risk clobbering it too early
in the code sequence we generate below. */
if (target == 0
|| target == op0
|| target == op1
|| !REG_P (target)
|| !valid_multiword_target_p (target))
target = gen_reg_rtx (mode);
start_sequence ();
shift_count = INTVAL (op1);
/* OUTOF_* is the word we are shifting bits away from, and
INTO_* is the word that we are shifting bits towards, thus
they differ depending on the direction of the shift and
WORDS_BIG_ENDIAN. */
left_shift = (binoptab == rotl_optab);
outof_word = left_shift ^ ! WORDS_BIG_ENDIAN;
outof_target = operand_subword (target, outof_word, 1, mode);
into_target = operand_subword (target, 1 - outof_word, 1, mode);
outof_input = operand_subword_force (op0, outof_word, mode);
into_input = operand_subword_force (op0, 1 - outof_word, mode);
if (shift_count == BITS_PER_WORD)
{
/* This is just a word swap. */
emit_move_insn (outof_target, into_input);
emit_move_insn (into_target, outof_input);
inter = const0_rtx;
}
else
{
rtx into_temp1, into_temp2, outof_temp1, outof_temp2;
rtx first_shift_count, second_shift_count;
optab reverse_unsigned_shift, unsigned_shift;
reverse_unsigned_shift = (left_shift ^ (shift_count < BITS_PER_WORD)
? lshr_optab : ashl_optab);
unsigned_shift = (left_shift ^ (shift_count < BITS_PER_WORD)
? ashl_optab : lshr_optab);
if (shift_count > BITS_PER_WORD)
{
first_shift_count = GEN_INT (shift_count - BITS_PER_WORD);
second_shift_count = GEN_INT (2 * BITS_PER_WORD - shift_count);
}
else
{
first_shift_count = GEN_INT (BITS_PER_WORD - shift_count);
second_shift_count = GEN_INT (shift_count);
}
into_temp1 = expand_binop (word_mode, unsigned_shift,
outof_input, first_shift_count,
NULL_RTX, unsignedp, next_methods);
into_temp2 = expand_binop (word_mode, reverse_unsigned_shift,
into_input, second_shift_count,
NULL_RTX, unsignedp, next_methods);
if (into_temp1 != 0 && into_temp2 != 0)
inter = expand_binop (word_mode, ior_optab, into_temp1, into_temp2,
into_target, unsignedp, next_methods);
else
inter = 0;
if (inter != 0 && inter != into_target)
emit_move_insn (into_target, inter);
outof_temp1 = expand_binop (word_mode, unsigned_shift,
into_input, first_shift_count,
NULL_RTX, unsignedp, next_methods);
outof_temp2 = expand_binop (word_mode, reverse_unsigned_shift,
outof_input, second_shift_count,
NULL_RTX, unsignedp, next_methods);
if (inter != 0 && outof_temp1 != 0 && outof_temp2 != 0)
inter = expand_binop (word_mode, ior_optab,
outof_temp1, outof_temp2,
outof_target, unsignedp, next_methods);
if (inter != 0 && inter != outof_target)
emit_move_insn (outof_target, inter);
}
insns = get_insns ();
end_sequence ();
if (inter != 0)
{
emit_insn (insns);
return target;
}
}
/* These can be done a word at a time by propagating carries. */
if ((binoptab == add_optab || binoptab == sub_optab)
&& mclass == MODE_INT
&& GET_MODE_SIZE (mode) >= 2 * UNITS_PER_WORD
&& optab_handler (binoptab, word_mode) != CODE_FOR_nothing)
{
unsigned int i;
optab otheroptab = binoptab == add_optab ? sub_optab : add_optab;
const unsigned int nwords = GET_MODE_BITSIZE (mode) / BITS_PER_WORD;
rtx carry_in = NULL_RTX, carry_out = NULL_RTX;
rtx xop0, xop1, xtarget;
/* We can handle either a 1 or -1 value for the carry. If STORE_FLAG
value is one of those, use it. Otherwise, use 1 since it is the
one easiest to get. */
#if STORE_FLAG_VALUE == 1 || STORE_FLAG_VALUE == -1
int normalizep = STORE_FLAG_VALUE;
#else
int normalizep = 1;
#endif
/* Prepare the operands. */
xop0 = force_reg (mode, op0);
xop1 = force_reg (mode, op1);
xtarget = gen_reg_rtx (mode);
if (target == 0 || !REG_P (target) || !valid_multiword_target_p (target))
target = xtarget;
/* Indicate for flow that the entire target reg is being set. */
if (REG_P (target))
emit_clobber (xtarget);
/* Do the actual arithmetic. */
for (i = 0; i < nwords; i++)
{
int index = (WORDS_BIG_ENDIAN ? nwords - i - 1 : i);
rtx target_piece = operand_subword (xtarget, index, 1, mode);
rtx op0_piece = operand_subword_force (xop0, index, mode);
rtx op1_piece = operand_subword_force (xop1, index, mode);
rtx x;
/* Main add/subtract of the input operands. */
x = expand_binop (word_mode, binoptab,
op0_piece, op1_piece,
target_piece, unsignedp, next_methods);
if (x == 0)
break;
if (i + 1 < nwords)
{
/* Store carry from main add/subtract. */
carry_out = gen_reg_rtx (word_mode);
carry_out = emit_store_flag_force (carry_out,
(binoptab == add_optab
? LT : GT),
x, op0_piece,
word_mode, 1, normalizep);
}
if (i > 0)
{
rtx newx;
/* Add/subtract previous carry to main result. */
newx = expand_binop (word_mode,
normalizep == 1 ? binoptab : otheroptab,
x, carry_in,
NULL_RTX, 1, next_methods);
if (i + 1 < nwords)
{
/* Get out carry from adding/subtracting carry in. */
rtx carry_tmp = gen_reg_rtx (word_mode);
carry_tmp = emit_store_flag_force (carry_tmp,
(binoptab == add_optab
? LT : GT),
newx, x,
word_mode, 1, normalizep);
/* Logical-ior the two poss. carry together. */
carry_out = expand_binop (word_mode, ior_optab,
carry_out, carry_tmp,
carry_out, 0, next_methods);
if (carry_out == 0)
break;
}
emit_move_insn (target_piece, newx);
}
else
{
if (x != target_piece)
emit_move_insn (target_piece, x);
}
carry_in = carry_out;
}
if (i == GET_MODE_BITSIZE (mode) / (unsigned) BITS_PER_WORD)
{
if (optab_handler (mov_optab, mode) != CODE_FOR_nothing
|| ! rtx_equal_p (target, xtarget))
{
rtx temp = emit_move_insn (target, xtarget);
set_dst_reg_note (temp, REG_EQUAL,
gen_rtx_fmt_ee (optab_to_code (binoptab),
mode, copy_rtx (xop0),
copy_rtx (xop1)),
target);
}
else
target = xtarget;
return target;
}
else
delete_insns_since (last);
}
/* Attempt to synthesize double word multiplies using a sequence of word
mode multiplications. We first attempt to generate a sequence using a
more efficient unsigned widening multiply, and if that fails we then
try using a signed widening multiply. */
if (binoptab == smul_optab
&& mclass == MODE_INT
&& GET_MODE_SIZE (mode) == 2 * UNITS_PER_WORD
&& optab_handler (smul_optab, word_mode) != CODE_FOR_nothing
&& optab_handler (add_optab, word_mode) != CODE_FOR_nothing)
{
rtx product = NULL_RTX;
if (widening_optab_handler (umul_widen_optab, mode, word_mode)
!= CODE_FOR_nothing)
{
product = expand_doubleword_mult (mode, op0, op1, target,
true, methods);
if (!product)
delete_insns_since (last);
}
if (product == NULL_RTX
&& widening_optab_handler (smul_widen_optab, mode, word_mode)
!= CODE_FOR_nothing)
{
product = expand_doubleword_mult (mode, op0, op1, target,
false, methods);
if (!product)
delete_insns_since (last);
}
if (product != NULL_RTX)
{
if (optab_handler (mov_optab, mode) != CODE_FOR_nothing)
{
temp = emit_move_insn (target ? target : product, product);
set_dst_reg_note (temp,
REG_EQUAL,
gen_rtx_fmt_ee (MULT, mode,
copy_rtx (op0),
copy_rtx (op1)),
target ? target : product);
}
return product;
}
}
/* It can't be open-coded in this mode.
Use a library call if one is available and caller says that's ok. */
libfunc = optab_libfunc (binoptab, mode);
if (libfunc
&& (methods == OPTAB_LIB || methods == OPTAB_LIB_WIDEN))
{
rtx_insn *insns;
rtx op1x = op1;
machine_mode op1_mode = mode;
rtx value;
start_sequence ();
if (shift_optab_p (binoptab))
{
op1_mode = targetm.libgcc_shift_count_mode ();
/* Specify unsigned here,
since negative shift counts are meaningless. */
op1x = convert_to_mode (op1_mode, op1, 1);
}
if (GET_MODE (op0) != VOIDmode
&& GET_MODE (op0) != mode)
op0 = convert_to_mode (mode, op0, unsignedp);
/* Pass 1 for NO_QUEUE so we don't lose any increments
if the libcall is cse'd or moved. */
value = emit_library_call_value (libfunc,
NULL_RTX, LCT_CONST, mode, 2,
op0, mode, op1x, op1_mode);
insns = get_insns ();
end_sequence ();
target = gen_reg_rtx (mode);
emit_libcall_block_1 (insns, target, value,
gen_rtx_fmt_ee (optab_to_code (binoptab),
mode, op0, op1),
trapv_binoptab_p (binoptab));
return target;
}
delete_insns_since (last);
/* It can't be done in this mode. Can we do it in a wider mode? */
if (! (methods == OPTAB_WIDEN || methods == OPTAB_LIB_WIDEN
|| methods == OPTAB_MUST_WIDEN))
{
/* Caller says, don't even try. */
delete_insns_since (entry_last);
return 0;
}
/* Compute the value of METHODS to pass to recursive calls.
Don't allow widening to be tried recursively. */
methods = (methods == OPTAB_LIB_WIDEN ? OPTAB_LIB : OPTAB_DIRECT);
/* Look for a wider mode of the same class for which it appears we can do
the operation. */
if (CLASS_HAS_WIDER_MODES_P (mclass))
{
for (wider_mode = GET_MODE_WIDER_MODE (mode);
wider_mode != VOIDmode;
wider_mode = GET_MODE_WIDER_MODE (wider_mode))
{
if (find_widening_optab_handler (binoptab, wider_mode, mode, 1)
!= CODE_FOR_nothing
|| (methods == OPTAB_LIB
&& optab_libfunc (binoptab, wider_mode)))
{
rtx xop0 = op0, xop1 = op1;
int no_extend = 0;
/* For certain integer operations, we need not actually extend
the narrow operands, as long as we will truncate
the results to the same narrowness. */
if ((binoptab == ior_optab || binoptab == and_optab
|| binoptab == xor_optab
|| binoptab == add_optab || binoptab == sub_optab
|| binoptab == smul_optab || binoptab == ashl_optab)
&& mclass == MODE_INT)
no_extend = 1;
xop0 = widen_operand (xop0, wider_mode, mode,
unsignedp, no_extend);
/* The second operand of a shift must always be extended. */
xop1 = widen_operand (xop1, wider_mode, mode, unsignedp,
no_extend && binoptab != ashl_optab);
temp = expand_binop (wider_mode, binoptab, xop0, xop1, NULL_RTX,
unsignedp, methods);
if (temp)
{
if (mclass != MODE_INT
|| !TRULY_NOOP_TRUNCATION_MODES_P (mode, wider_mode))
{
if (target == 0)
target = gen_reg_rtx (mode);
convert_move (target, temp, 0);
return target;
}
else
return gen_lowpart (mode, temp);
}
else
delete_insns_since (last);
}
}
}
delete_insns_since (entry_last);
return 0;
}
/* Expand a binary operator which has both signed and unsigned forms.
UOPTAB is the optab for unsigned operations, and SOPTAB is for
signed operations.
If we widen unsigned operands, we may use a signed wider operation instead
of an unsigned wider operation, since the result would be the same. */
rtx
sign_expand_binop (machine_mode mode, optab uoptab, optab soptab,
rtx op0, rtx op1, rtx target, int unsignedp,
enum optab_methods methods)
{
rtx temp;
optab direct_optab = unsignedp ? uoptab : soptab;
bool save_enable;
/* Do it without widening, if possible. */
temp = expand_binop (mode, direct_optab, op0, op1, target,
unsignedp, OPTAB_DIRECT);
if (temp || methods == OPTAB_DIRECT)
return temp;
/* Try widening to a signed int. Disable any direct use of any
signed insn in the current mode. */
save_enable = swap_optab_enable (soptab, mode, false);
temp = expand_binop (mode, soptab, op0, op1, target,
unsignedp, OPTAB_WIDEN);
/* For unsigned operands, try widening to an unsigned int. */
if (!temp && unsignedp)
temp = expand_binop (mode, uoptab, op0, op1, target,
unsignedp, OPTAB_WIDEN);
if (temp || methods == OPTAB_WIDEN)
goto egress;
/* Use the right width libcall if that exists. */
temp = expand_binop (mode, direct_optab, op0, op1, target,
unsignedp, OPTAB_LIB);
if (temp || methods == OPTAB_LIB)
goto egress;
/* Must widen and use a libcall, use either signed or unsigned. */
temp = expand_binop (mode, soptab, op0, op1, target,
unsignedp, methods);
if (!temp && unsignedp)
temp = expand_binop (mode, uoptab, op0, op1, target,
unsignedp, methods);
egress:
/* Undo the fiddling above. */
if (save_enable)
swap_optab_enable (soptab, mode, true);
return temp;
}
/* Generate code to perform an operation specified by UNOPPTAB
on operand OP0, with two results to TARG0 and TARG1.
We assume that the order of the operands for the instruction
is TARG0, TARG1, OP0.
Either TARG0 or TARG1 may be zero, but what that means is that
the result is not actually wanted. We will generate it into
a dummy pseudo-reg and discard it. They may not both be zero.
Returns 1 if this operation can be performed; 0 if not. */
int
expand_twoval_unop (optab unoptab, rtx op0, rtx targ0, rtx targ1,
int unsignedp)
{
machine_mode mode = GET_MODE (targ0 ? targ0 : targ1);
enum mode_class mclass;
machine_mode wider_mode;
rtx_insn *entry_last = get_last_insn ();
rtx_insn *last;
mclass = GET_MODE_CLASS (mode);
if (!targ0)
targ0 = gen_reg_rtx (mode);
if (!targ1)
targ1 = gen_reg_rtx (mode);
/* Record where to go back to if we fail. */
last = get_last_insn ();
if (optab_handler (unoptab, mode) != CODE_FOR_nothing)
{
struct expand_operand ops[3];
enum insn_code icode = optab_handler (unoptab, mode);
create_fixed_operand (&ops[0], targ0);
create_fixed_operand (&ops[1], targ1);
create_convert_operand_from (&ops[2], op0, mode, unsignedp);
if (maybe_expand_insn (icode, 3, ops))
return 1;
}
/* It can't be done in this mode. Can we do it in a wider mode? */
if (CLASS_HAS_WIDER_MODES_P (mclass))
{
for (wider_mode = GET_MODE_WIDER_MODE (mode);
wider_mode != VOIDmode;
wider_mode = GET_MODE_WIDER_MODE (wider_mode))
{
if (optab_handler (unoptab, wider_mode) != CODE_FOR_nothing)
{
rtx t0 = gen_reg_rtx (wider_mode);
rtx t1 = gen_reg_rtx (wider_mode);
rtx cop0 = convert_modes (wider_mode, mode, op0, unsignedp);
if (expand_twoval_unop (unoptab, cop0, t0, t1, unsignedp))
{
convert_move (targ0, t0, unsignedp);
convert_move (targ1, t1, unsignedp);
return 1;
}
else
delete_insns_since (last);
}
}
}
delete_insns_since (entry_last);
return 0;
}
/* Generate code to perform an operation specified by BINOPTAB
on operands OP0 and OP1, with two results to TARG1 and TARG2.
We assume that the order of the operands for the instruction
is TARG0, OP0, OP1, TARG1, which would fit a pattern like
[(set TARG0 (operate OP0 OP1)) (set TARG1 (operate ...))].
Either TARG0 or TARG1 may be zero, but what that means is that
the result is not actually wanted. We will generate it into
a dummy pseudo-reg and discard it. They may not both be zero.
Returns 1 if this operation can be performed; 0 if not. */
int
expand_twoval_binop (optab binoptab, rtx op0, rtx op1, rtx targ0, rtx targ1,
int unsignedp)
{
machine_mode mode = GET_MODE (targ0 ? targ0 : targ1);
enum mode_class mclass;
machine_mode wider_mode;
rtx_insn *entry_last = get_last_insn ();
rtx_insn *last;
mclass = GET_MODE_CLASS (mode);
if (!targ0)
targ0 = gen_reg_rtx (mode);
if (!targ1)
targ1 = gen_reg_rtx (mode);
/* Record where to go back to if we fail. */
last = get_last_insn ();
if (optab_handler (binoptab, mode) != CODE_FOR_nothing)
{
struct expand_operand ops[4];
enum insn_code icode = optab_handler (binoptab, mode);
machine_mode mode0 = insn_data[icode].operand[1].mode;
machine_mode mode1 = insn_data[icode].operand[2].mode;
rtx xop0 = op0, xop1 = op1;
/* If we are optimizing, force expensive constants into a register. */
xop0 = avoid_expensive_constant (mode0, binoptab, 0, xop0, unsignedp);
xop1 = avoid_expensive_constant (mode1, binoptab, 1, xop1, unsignedp);
create_fixed_operand (&ops[0], targ0);
create_convert_operand_from (&ops[1], op0, mode, unsignedp);
create_convert_operand_from (&ops[2], op1, mode, unsignedp);
create_fixed_operand (&ops[3], targ1);
if (maybe_expand_insn (icode, 4, ops))
return 1;
delete_insns_since (last);
}
/* It can't be done in this mode. Can we do it in a wider mode? */
if (CLASS_HAS_WIDER_MODES_P (mclass))
{
for (wider_mode = GET_MODE_WIDER_MODE (mode);
wider_mode != VOIDmode;
wider_mode = GET_MODE_WIDER_MODE (wider_mode))
{
if (optab_handler (binoptab, wider_mode) != CODE_FOR_nothing)
{
rtx t0 = gen_reg_rtx (wider_mode);
rtx t1 = gen_reg_rtx (wider_mode);
rtx cop0 = convert_modes (wider_mode, mode, op0, unsignedp);
rtx cop1 = convert_modes (wider_mode, mode, op1, unsignedp);
if (expand_twoval_binop (binoptab, cop0, cop1,
t0, t1, unsignedp))
{
convert_move (targ0, t0, unsignedp);
convert_move (targ1, t1, unsignedp);
return 1;
}
else
delete_insns_since (last);
}
}
}
delete_insns_since (entry_last);
return 0;
}
/* Expand the two-valued library call indicated by BINOPTAB, but
preserve only one of the values. If TARG0 is non-NULL, the first
value is placed into TARG0; otherwise the second value is placed
into TARG1. Exactly one of TARG0 and TARG1 must be non-NULL. The
value stored into TARG0 or TARG1 is equivalent to (CODE OP0 OP1).
This routine assumes that the value returned by the library call is
as if the return value was of an integral mode twice as wide as the
mode of OP0. Returns 1 if the call was successful. */
bool
expand_twoval_binop_libfunc (optab binoptab, rtx op0, rtx op1,
rtx targ0, rtx targ1, enum rtx_code code)
{
machine_mode mode;
machine_mode libval_mode;
rtx libval;
rtx_insn *insns;
rtx libfunc;
/* Exactly one of TARG0 or TARG1 should be non-NULL. */
gcc_assert (!targ0 != !targ1);
mode = GET_MODE (op0);
libfunc = optab_libfunc (binoptab, mode);
if (!libfunc)
return false;
/* The value returned by the library function will have twice as
many bits as the nominal MODE. */
libval_mode = smallest_mode_for_size (2 * GET_MODE_BITSIZE (mode),
MODE_INT);
start_sequence ();
libval = emit_library_call_value (libfunc, NULL_RTX, LCT_CONST,
libval_mode, 2,
op0, mode,
op1, mode);
/* Get the part of VAL containing the value that we want. */
libval = simplify_gen_subreg (mode, libval, libval_mode,
targ0 ? 0 : GET_MODE_SIZE (mode));
insns = get_insns ();
end_sequence ();
/* Move the into the desired location. */
emit_libcall_block (insns, targ0 ? targ0 : targ1, libval,
gen_rtx_fmt_ee (code, mode, op0, op1));
return true;
}
/* Wrapper around expand_unop which takes an rtx code to specify
the operation to perform, not an optab pointer. All other
arguments are the same. */
rtx
expand_simple_unop (machine_mode mode, enum rtx_code code, rtx op0,
rtx target, int unsignedp)
{
optab unop = code_to_optab (code);
gcc_assert (unop);
return expand_unop (mode, unop, op0, target, unsignedp);
}
/* Try calculating
(clz:narrow x)
as
(clz:wide (zero_extend:wide x)) - ((width wide) - (width narrow)).
A similar operation can be used for clrsb. UNOPTAB says which operation
we are trying to expand. */
static rtx
widen_leading (machine_mode mode, rtx op0, rtx target, optab unoptab)
{
enum mode_class mclass = GET_MODE_CLASS (mode);
if (CLASS_HAS_WIDER_MODES_P (mclass))
{
machine_mode wider_mode;
for (wider_mode = GET_MODE_WIDER_MODE (mode);
wider_mode != VOIDmode;
wider_mode = GET_MODE_WIDER_MODE (wider_mode))
{
if (optab_handler (unoptab, wider_mode) != CODE_FOR_nothing)
{
rtx xop0, temp;
rtx_insn *last;
last = get_last_insn ();
if (target == 0)
target = gen_reg_rtx (mode);
xop0 = widen_operand (op0, wider_mode, mode,
unoptab != clrsb_optab, false);
temp = expand_unop (wider_mode, unoptab, xop0, NULL_RTX,
unoptab != clrsb_optab);
if (temp != 0)
temp = expand_binop
(wider_mode, sub_optab, temp,
gen_int_mode (GET_MODE_PRECISION (wider_mode)
- GET_MODE_PRECISION (mode),
wider_mode),
target, true, OPTAB_DIRECT);
if (temp == 0)
delete_insns_since (last);
return temp;
}
}
}
return 0;
}
/* Try calculating clz of a double-word quantity as two clz's of word-sized
quantities, choosing which based on whether the high word is nonzero. */
static rtx
expand_doubleword_clz (machine_mode mode, rtx op0, rtx target)
{
rtx xop0 = force_reg (mode, op0);
rtx subhi = gen_highpart (word_mode, xop0);
rtx sublo = gen_lowpart (word_mode, xop0);
rtx_code_label *hi0_label = gen_label_rtx ();
rtx_code_label *after_label = gen_label_rtx ();
rtx_insn *seq;
rtx temp, result;
/* If we were not given a target, use a word_mode register, not a
'mode' register. The result will fit, and nobody is expecting
anything bigger (the return type of __builtin_clz* is int). */
if (!target)
target = gen_reg_rtx (word_mode);
/* In any case, write to a word_mode scratch in both branches of the
conditional, so we can ensure there is a single move insn setting
'target' to tag a REG_EQUAL note on. */
result = gen_reg_rtx (word_mode);
start_sequence ();
/* If the high word is not equal to zero,
then clz of the full value is clz of the high word. */
emit_cmp_and_jump_insns (subhi, CONST0_RTX (word_mode), EQ, 0,
word_mode, true, hi0_label);
temp = expand_unop_direct (word_mode, clz_optab, subhi, result, true);
if (!temp)
goto fail;
if (temp != result)
convert_move (result, temp, true);
emit_jump_insn (gen_jump (after_label));
emit_barrier ();
/* Else clz of the full value is clz of the low word plus the number
of bits in the high word. */
emit_label (hi0_label);
temp = expand_unop_direct (word_mode, clz_optab, sublo, 0, true);
if (!temp)
goto fail;
temp = expand_binop (word_mode, add_optab, temp,
gen_int_mode (GET_MODE_BITSIZE (word_mode), word_mode),
result, true, OPTAB_DIRECT);
if (!temp)
goto fail;
if (temp != result)
convert_move (result, temp, true);
emit_label (after_label);
convert_move (target, result, true);
seq = get_insns ();
end_sequence ();
add_equal_note (seq, target, CLZ, xop0, 0);
emit_insn (seq);
return target;
fail:
end_sequence ();
return 0;
}
/* Try calculating
(bswap:narrow x)
as
(lshiftrt:wide (bswap:wide x) ((width wide) - (width narrow))). */
static rtx
widen_bswap (machine_mode mode, rtx op0, rtx target)
{
enum mode_class mclass = GET_MODE_CLASS (mode);
machine_mode wider_mode;
rtx x;
rtx_insn *last;
if (!CLASS_HAS_WIDER_MODES_P (mclass))
return NULL_RTX;
for (wider_mode = GET_MODE_WIDER_MODE (mode);
wider_mode != VOIDmode;
wider_mode = GET_MODE_WIDER_MODE (wider_mode))
if (optab_handler (bswap_optab, wider_mode) != CODE_FOR_nothing)
goto found;
return NULL_RTX;
found:
last = get_last_insn ();
x = widen_operand (op0, wider_mode, mode, true, true);
x = expand_unop (wider_mode, bswap_optab, x, NULL_RTX, true);
gcc_assert (GET_MODE_PRECISION (wider_mode) == GET_MODE_BITSIZE (wider_mode)
&& GET_MODE_PRECISION (mode) == GET_MODE_BITSIZE (mode));
if (x != 0)
x = expand_shift (RSHIFT_EXPR, wider_mode, x,
GET_MODE_BITSIZE (wider_mode)
- GET_MODE_BITSIZE (mode),
NULL_RTX, true);
if (x != 0)
{
if (target == 0)
target = gen_reg_rtx (mode);
emit_move_insn (target, gen_lowpart (mode, x));
}
else
delete_insns_since (last);
return target;
}
/* Try calculating bswap as two bswaps of two word-sized operands. */
static rtx
expand_doubleword_bswap (machine_mode mode, rtx op, rtx target)
{
rtx t0, t1;
t1 = expand_unop (word_mode, bswap_optab,
operand_subword_force (op, 0, mode), NULL_RTX, true);
t0 = expand_unop (word_mode, bswap_optab,
operand_subword_force (op, 1, mode), NULL_RTX, true);
if (target == 0 || !valid_multiword_target_p (target))
target = gen_reg_rtx (mode);
if (REG_P (target))
emit_clobber (target);
emit_move_insn (operand_subword (target, 0, 1, mode), t0);
emit_move_insn (operand_subword (target, 1, 1, mode), t1);
return target;
}
/* Try calculating (parity x) as (and (popcount x) 1), where
popcount can also be done in a wider mode. */
static rtx
expand_parity (machine_mode mode, rtx op0, rtx target)
{
enum mode_class mclass = GET_MODE_CLASS (mode);
if (CLASS_HAS_WIDER_MODES_P (mclass))
{
machine_mode wider_mode;
for (wider_mode = mode; wider_mode != VOIDmode;
wider_mode = GET_MODE_WIDER_MODE (wider_mode))
{
if (optab_handler (popcount_optab, wider_mode) != CODE_FOR_nothing)
{
rtx xop0, temp;
rtx_insn *last;
last = get_last_insn ();
if (target == 0)
target = gen_reg_rtx (mode);
xop0 = widen_operand (op0, wider_mode, mode, true, false);
temp = expand_unop (wider_mode, popcount_optab, xop0, NULL_RTX,
true);
if (temp != 0)
temp = expand_binop (wider_mode, and_optab, temp, const1_rtx,
target, true, OPTAB_DIRECT);
if (temp == 0)
delete_insns_since (last);
return temp;
}
}
}
return 0;
}
/* Try calculating ctz(x) as K - clz(x & -x) ,
where K is GET_MODE_PRECISION(mode) - 1.
Both __builtin_ctz and __builtin_clz are undefined at zero, so we
don't have to worry about what the hardware does in that case. (If
the clz instruction produces the usual value at 0, which is K, the
result of this code sequence will be -1; expand_ffs, below, relies
on this. It might be nice to have it be K instead, for consistency
with the (very few) processors that provide a ctz with a defined
value, but that would take one more instruction, and it would be
less convenient for expand_ffs anyway. */
static rtx
expand_ctz (machine_mode mode, rtx op0, rtx target)
{
rtx_insn *seq;
rtx temp;
if (optab_handler (clz_optab, mode) == CODE_FOR_nothing)
return 0;
start_sequence ();
temp = expand_unop_direct (mode, neg_optab, op0, NULL_RTX, true);
if (temp)
temp = expand_binop (mode, and_optab, op0, temp, NULL_RTX,
true, OPTAB_DIRECT);
if (temp)
temp = expand_unop_direct (mode, clz_optab, temp, NULL_RTX, true);
if (temp)
temp = expand_binop (mode, sub_optab,
gen_int_mode (GET_MODE_PRECISION (mode) - 1, mode),
temp, target,
true, OPTAB_DIRECT);
if (temp == 0)
{
end_sequence ();
return 0;
}
seq = get_insns ();
end_sequence ();
add_equal_note (seq, temp, CTZ, op0, 0);
emit_insn (seq);
return temp;
}
/* Try calculating ffs(x) using ctz(x) if we have that instruction, or
else with the sequence used by expand_clz.
The ffs builtin promises to return zero for a zero value and ctz/clz
may have an undefined value in that case. If they do not give us a
convenient value, we have to generate a test and branch. */
static rtx
expand_ffs (machine_mode mode, rtx op0, rtx target)
{
HOST_WIDE_INT val = 0;
bool defined_at_zero = false;
rtx temp;
rtx_insn *seq;
if (optab_handler (ctz_optab, mode) != CODE_FOR_nothing)
{
start_sequence ();
temp = expand_unop_direct (mode, ctz_optab, op0, 0, true);
if (!temp)
goto fail;
defined_at_zero = (CTZ_DEFINED_VALUE_AT_ZERO (mode, val) == 2);
}
else if (optab_handler (clz_optab, mode) != CODE_FOR_nothing)
{
start_sequence ();
temp = expand_ctz (mode, op0, 0);
if (!temp)
goto fail;
if (CLZ_DEFINED_VALUE_AT_ZERO (mode, val) == 2)
{
defined_at_zero = true;
val = (GET_MODE_PRECISION (mode) - 1) - val;
}
}
else
return 0;
if (defined_at_zero && val == -1)
/* No correction needed at zero. */;
else
{
/* We don't try to do anything clever with the situation found
on some processors (eg Alpha) where ctz(0:mode) ==
bitsize(mode). If someone can think of a way to send N to -1
and leave alone all values in the range 0..N-1 (where N is a
power of two), cheaper than this test-and-branch, please add it.
The test-and-branch is done after the operation itself, in case
the operation sets condition codes that can be recycled for this.
(This is true on i386, for instance.) */
rtx_code_label *nonzero_label = gen_label_rtx ();
emit_cmp_and_jump_insns (op0, CONST0_RTX (mode), NE, 0,
mode, true, nonzero_label);
convert_move (temp, GEN_INT (-1), false);
emit_label (nonzero_label);
}
/* temp now has a value in the range -1..bitsize-1. ffs is supposed
to produce a value in the range 0..bitsize. */
temp = expand_binop (mode, add_optab, temp, gen_int_mode (1, mode),
target, false, OPTAB_DIRECT);
if (!temp)
goto fail;
seq = get_insns ();
end_sequence ();
add_equal_note (seq, temp, FFS, op0, 0);
emit_insn (seq);
return temp;
fail:
end_sequence ();
return 0;
}
/* Extract the OMODE lowpart from VAL, which has IMODE. Under certain
conditions, VAL may already be a SUBREG against which we cannot generate
a further SUBREG. In this case, we expect forcing the value into a
register will work around the situation. */
static rtx
lowpart_subreg_maybe_copy (machine_mode omode, rtx val,
machine_mode imode)
{
rtx ret;
ret = lowpart_subreg (omode, val, imode);
if (ret == NULL)
{
val = force_reg (imode, val);
ret = lowpart_subreg (omode, val, imode);
gcc_assert (ret != NULL);
}
return ret;
}
/* Expand a floating point absolute value or negation operation via a
logical operation on the sign bit. */
static rtx
expand_absneg_bit (enum rtx_code code, machine_mode mode,
rtx op0, rtx target)
{
const struct real_format *fmt;
int bitpos, word, nwords, i;
machine_mode imode;
rtx temp;
rtx_insn *insns;
/* The format has to have a simple sign bit. */
fmt = REAL_MODE_FORMAT (mode);
if (fmt == NULL)
return NULL_RTX;
bitpos = fmt->signbit_rw;
if (bitpos < 0)
return NULL_RTX;
/* Don't create negative zeros if the format doesn't support them. */
if (code == NEG && !fmt->has_signed_zero)
return NULL_RTX;
if (GET_MODE_SIZE (mode) <= UNITS_PER_WORD)
{
imode = int_mode_for_mode (mode);
if (imode == BLKmode)
return NULL_RTX;
word = 0;
nwords = 1;
}
else
{
imode = word_mode;
if (FLOAT_WORDS_BIG_ENDIAN)
word = (GET_MODE_BITSIZE (mode) - bitpos) / BITS_PER_WORD;
else
word = bitpos / BITS_PER_WORD;
bitpos = bitpos % BITS_PER_WORD;
nwords = (GET_MODE_BITSIZE (mode) + BITS_PER_WORD - 1) / BITS_PER_WORD;
}
wide_int mask = wi::set_bit_in_zero (bitpos, GET_MODE_PRECISION (imode));
if (code == ABS)
mask = ~mask;
if (target == 0
|| target == op0
|| (nwords > 1 && !valid_multiword_target_p (target)))
target = gen_reg_rtx (mode);
if (nwords > 1)
{
start_sequence ();
for (i = 0; i < nwords; ++i)
{
rtx targ_piece = operand_subword (target, i, 1, mode);
rtx op0_piece = operand_subword_force (op0, i, mode);
if (i == word)
{
temp = expand_binop (imode, code == ABS ? and_optab : xor_optab,
op0_piece,
immed_wide_int_const (mask, imode),
targ_piece, 1, OPTAB_LIB_WIDEN);
if (temp != targ_piece)
emit_move_insn (targ_piece, temp);
}
else
emit_move_insn (targ_piece, op0_piece);
}
insns = get_insns ();
end_sequence ();
emit_insn (insns);
}
else
{
temp = expand_binop (imode, code == ABS ? and_optab : xor_optab,
gen_lowpart (imode, op0),
immed_wide_int_const (mask, imode),
gen_lowpart (imode, target), 1, OPTAB_LIB_WIDEN);
target = lowpart_subreg_maybe_copy (mode, temp, imode);
set_dst_reg_note (get_last_insn (), REG_EQUAL,
gen_rtx_fmt_e (code, mode, copy_rtx (op0)),
target);
}
return target;
}
/* As expand_unop, but will fail rather than attempt the operation in a
different mode or with a libcall. */
static rtx
expand_unop_direct (machine_mode mode, optab unoptab, rtx op0, rtx target,
int unsignedp)
{
if (optab_handler (unoptab, mode) != CODE_FOR_nothing)
{
struct expand_operand ops[2];
enum insn_code icode = optab_handler (unoptab, mode);
rtx_insn *last = get_last_insn ();
rtx pat;
create_output_operand (&ops[0], target, mode);
create_convert_operand_from (&ops[1], op0, mode, unsignedp);
pat = maybe_gen_insn (icode, 2, ops);
if (pat)
{
if (INSN_P (pat) && NEXT_INSN (as_a (pat)) != NULL_RTX
&& ! add_equal_note (as_a (pat), ops[0].value,
optab_to_code (unoptab),
ops[1].value, NULL_RTX))
{
delete_insns_since (last);
return expand_unop (mode, unoptab, op0, NULL_RTX, unsignedp);
}
emit_insn (pat);
return ops[0].value;
}
}
return 0;
}
/* Generate code to perform an operation specified by UNOPTAB
on operand OP0, with result having machine-mode MODE.
UNSIGNEDP is for the case where we have to widen the operands
to perform the operation. It says to use zero-extension.
If TARGET is nonzero, the value
is generated there, if it is convenient to do so.
In all cases an rtx is returned for the locus of the value;
this may or may not be TARGET. */
rtx
expand_unop (machine_mode mode, optab unoptab, rtx op0, rtx target,
int unsignedp)
{
enum mode_class mclass = GET_MODE_CLASS (mode);
machine_mode wider_mode;
rtx temp;
rtx libfunc;
temp = expand_unop_direct (mode, unoptab, op0, target, unsignedp);
if (temp)
return temp;
/* It can't be done in this mode. Can we open-code it in a wider mode? */
/* Widening (or narrowing) clz needs special treatment. */
if (unoptab == clz_optab)
{
temp = widen_leading (mode, op0, target, unoptab);
if (temp)
return temp;
if (GET_MODE_SIZE (mode) == 2 * UNITS_PER_WORD
&& optab_handler (unoptab, word_mode) != CODE_FOR_nothing)
{
temp = expand_doubleword_clz (mode, op0, target);
if (temp)
return temp;
}
goto try_libcall;
}
if (unoptab == clrsb_optab)
{
temp = widen_leading (mode, op0, target, unoptab);
if (temp)
return temp;
goto try_libcall;
}
/* Widening (or narrowing) bswap needs special treatment. */
if (unoptab == bswap_optab)
{
/* HImode is special because in this mode BSWAP is equivalent to ROTATE
or ROTATERT. First try these directly; if this fails, then try the
obvious pair of shifts with allowed widening, as this will probably
be always more efficient than the other fallback methods. */
if (mode == HImode)
{
rtx_insn *last;
rtx temp1, temp2;
if (optab_handler (rotl_optab, mode) != CODE_FOR_nothing)
{
temp = expand_binop (mode, rotl_optab, op0, GEN_INT (8), target,
unsignedp, OPTAB_DIRECT);
if (temp)
return temp;
}
if (optab_handler (rotr_optab, mode) != CODE_FOR_nothing)
{
temp = expand_binop (mode, rotr_optab, op0, GEN_INT (8), target,
unsignedp, OPTAB_DIRECT);
if (temp)
return temp;
}
last = get_last_insn ();
temp1 = expand_binop (mode, ashl_optab, op0, GEN_INT (8), NULL_RTX,
unsignedp, OPTAB_WIDEN);
temp2 = expand_binop (mode, lshr_optab, op0, GEN_INT (8), NULL_RTX,
unsignedp, OPTAB_WIDEN);
if (temp1 && temp2)
{
temp = expand_binop (mode, ior_optab, temp1, temp2, target,
unsignedp, OPTAB_WIDEN);
if (temp)
return temp;
}
delete_insns_since (last);
}
temp = widen_bswap (mode, op0, target);
if (temp)
return temp;
if (GET_MODE_SIZE (mode) == 2 * UNITS_PER_WORD
&& optab_handler (unoptab, word_mode) != CODE_FOR_nothing)
{
temp = expand_doubleword_bswap (mode, op0, target);
if (temp)
return temp;
}
goto try_libcall;
}
if (CLASS_HAS_WIDER_MODES_P (mclass))
for (wider_mode = GET_MODE_WIDER_MODE (mode);
wider_mode != VOIDmode;
wider_mode = GET_MODE_WIDER_MODE (wider_mode))
{
if (optab_handler (unoptab, wider_mode) != CODE_FOR_nothing)
{
rtx xop0 = op0;
rtx_insn *last = get_last_insn ();
/* For certain operations, we need not actually extend
the narrow operand, as long as we will truncate the
results to the same narrowness. */
xop0 = widen_operand (xop0, wider_mode, mode, unsignedp,
(unoptab == neg_optab
|| unoptab == one_cmpl_optab)
&& mclass == MODE_INT);
temp = expand_unop (wider_mode, unoptab, xop0, NULL_RTX,
unsignedp);
if (temp)
{
if (mclass != MODE_INT
|| !TRULY_NOOP_TRUNCATION_MODES_P (mode, wider_mode))
{
if (target == 0)
target = gen_reg_rtx (mode);
convert_move (target, temp, 0);
return target;
}
else
return gen_lowpart (mode, temp);
}
else
delete_insns_since (last);
}
}
/* These can be done a word at a time. */
if (unoptab == one_cmpl_optab
&& mclass == MODE_INT
&& GET_MODE_SIZE (mode) > UNITS_PER_WORD
&& optab_handler (unoptab, word_mode) != CODE_FOR_nothing)
{
int i;
rtx_insn *insns;
if (target == 0 || target == op0 || !valid_multiword_target_p (target))
target = gen_reg_rtx (mode);
start_sequence ();
/* Do the actual arithmetic. */
for (i = 0; i < GET_MODE_BITSIZE (mode) / BITS_PER_WORD; i++)
{
rtx target_piece = operand_subword (target, i, 1, mode);
rtx x = expand_unop (word_mode, unoptab,
operand_subword_force (op0, i, mode),
target_piece, unsignedp);
if (target_piece != x)
emit_move_insn (target_piece, x);
}
insns = get_insns ();
end_sequence ();
emit_insn (insns);
return target;
}
if (optab_to_code (unoptab) == NEG)
{
/* Try negating floating point values by flipping the sign bit. */
if (SCALAR_FLOAT_MODE_P (mode))
{
temp = expand_absneg_bit (NEG, mode, op0, target);
if (temp)
return temp;
}
/* If there is no negation pattern, and we have no negative zero,
try subtracting from zero. */
if (!HONOR_SIGNED_ZEROS (mode))
{
temp = expand_binop (mode, (unoptab == negv_optab
? subv_optab : sub_optab),
CONST0_RTX (mode), op0, target,
unsignedp, OPTAB_DIRECT);
if (temp)
return temp;
}
}
/* Try calculating parity (x) as popcount (x) % 2. */
if (unoptab == parity_optab)
{
temp = expand_parity (mode, op0, target);
if (temp)
return temp;
}
/* Try implementing ffs (x) in terms of clz (x). */
if (unoptab == ffs_optab)
{
temp = expand_ffs (mode, op0, target);
if (temp)
return temp;
}
/* Try implementing ctz (x) in terms of clz (x). */
if (unoptab == ctz_optab)
{
temp = expand_ctz (mode, op0, target);
if (temp)
return temp;
}
try_libcall:
/* Now try a library call in this mode. */
libfunc = optab_libfunc (unoptab, mode);
if (libfunc)
{
rtx_insn *insns;
rtx value;
rtx eq_value;
machine_mode outmode = mode;
/* All of these functions return small values. Thus we choose to
have them return something that isn't a double-word. */
if (unoptab == ffs_optab || unoptab == clz_optab || unoptab == ctz_optab
|| unoptab == clrsb_optab || unoptab == popcount_optab
|| unoptab == parity_optab)
outmode
= GET_MODE (hard_libcall_value (TYPE_MODE (integer_type_node),
optab_libfunc (unoptab, mode)));
start_sequence ();
/* Pass 1 for NO_QUEUE so we don't lose any increments
if the libcall is cse'd or moved. */
value = emit_library_call_value (libfunc, NULL_RTX, LCT_CONST, outmode,
1, op0, mode);
insns = get_insns ();
end_sequence ();
target = gen_reg_rtx (outmode);
eq_value = gen_rtx_fmt_e (optab_to_code (unoptab), mode, op0);
if (GET_MODE_SIZE (outmode) < GET_MODE_SIZE (mode))
eq_value = simplify_gen_unary (TRUNCATE, outmode, eq_value, mode);
else if (GET_MODE_SIZE (outmode) > GET_MODE_SIZE (mode))
eq_value = simplify_gen_unary (ZERO_EXTEND, outmode, eq_value, mode);
emit_libcall_block_1 (insns, target, value, eq_value,
trapv_unoptab_p (unoptab));
return target;
}
/* It can't be done in this mode. Can we do it in a wider mode? */
if (CLASS_HAS_WIDER_MODES_P (mclass))
{
for (wider_mode = GET_MODE_WIDER_MODE (mode);
wider_mode != VOIDmode;
wider_mode = GET_MODE_WIDER_MODE (wider_mode))
{
if (optab_handler (unoptab, wider_mode) != CODE_FOR_nothing
|| optab_libfunc (unoptab, wider_mode))
{
rtx xop0 = op0;
rtx_insn *last = get_last_insn ();
/* For certain operations, we need not actually extend
the narrow operand, as long as we will truncate the
results to the same narrowness. */
xop0 = widen_operand (xop0, wider_mode, mode, unsignedp,
(unoptab == neg_optab
|| unoptab == one_cmpl_optab
|| unoptab == bswap_optab)
&& mclass == MODE_INT);
temp = expand_unop (wider_mode, unoptab, xop0, NULL_RTX,
unsignedp);
/* If we are generating clz using wider mode, adjust the
result. Similarly for clrsb. */
if ((unoptab == clz_optab || unoptab == clrsb_optab)
&& temp != 0)
temp = expand_binop
(wider_mode, sub_optab, temp,
gen_int_mode (GET_MODE_PRECISION (wider_mode)
- GET_MODE_PRECISION (mode),
wider_mode),
target, true, OPTAB_DIRECT);
/* Likewise for bswap. */
if (unoptab == bswap_optab && temp != 0)
{
gcc_assert (GET_MODE_PRECISION (wider_mode)
== GET_MODE_BITSIZE (wider_mode)
&& GET_MODE_PRECISION (mode)
== GET_MODE_BITSIZE (mode));
temp = expand_shift (RSHIFT_EXPR, wider_mode, temp,
GET_MODE_BITSIZE (wider_mode)
- GET_MODE_BITSIZE (mode),
NULL_RTX, true);
}
if (temp)
{
if (mclass != MODE_INT)
{
if (target == 0)
target = gen_reg_rtx (mode);
convert_move (target, temp, 0);
return target;
}
else
return gen_lowpart (mode, temp);
}
else
delete_insns_since (last);
}
}
}
/* One final attempt at implementing negation via subtraction,
this time allowing widening of the operand. */
if (optab_to_code (unoptab) == NEG && !HONOR_SIGNED_ZEROS (mode))
{
rtx temp;
temp = expand_binop (mode,
unoptab == negv_optab ? subv_optab : sub_optab,
CONST0_RTX (mode), op0,
target, unsignedp, OPTAB_LIB_WIDEN);
if (temp)
return temp;
}
return 0;
}
/* Emit code to compute the absolute value of OP0, with result to
TARGET if convenient. (TARGET may be 0.) The return value says
where the result actually is to be found.
MODE is the mode of the operand; the mode of the result is
different but can be deduced from MODE.
*/
rtx
expand_abs_nojump (machine_mode mode, rtx op0, rtx target,
int result_unsignedp)
{
rtx temp;
if (GET_MODE_CLASS (mode) != MODE_INT
|| ! flag_trapv)
result_unsignedp = 1;
/* First try to do it with a special abs instruction. */
temp = expand_unop (mode, result_unsignedp ? abs_optab : absv_optab,
op0, target, 0);
if (temp != 0)
return temp;
/* For floating point modes, try clearing the sign bit. */
if (SCALAR_FLOAT_MODE_P (mode))
{
temp = expand_absneg_bit (ABS, mode, op0, target);
if (temp)
return temp;
}
/* If we have a MAX insn, we can do this as MAX (x, -x). */
if (optab_handler (smax_optab, mode) != CODE_FOR_nothing
&& !HONOR_SIGNED_ZEROS (mode))
{
rtx_insn *last = get_last_insn ();
temp = expand_unop (mode, result_unsignedp ? neg_optab : negv_optab,
op0, NULL_RTX, 0);
if (temp != 0)
temp = expand_binop (mode, smax_optab, op0, temp, target, 0,
OPTAB_WIDEN);
if (temp != 0)
return temp;
delete_insns_since (last);
}
/* If this machine has expensive jumps, we can do integer absolute
value of X as (((signed) x >> (W-1)) ^ x) - ((signed) x >> (W-1)),
where W is the width of MODE. */
if (GET_MODE_CLASS (mode) == MODE_INT
&& BRANCH_COST (optimize_insn_for_speed_p (),
false) >= 2)
{
rtx extended = expand_shift (RSHIFT_EXPR, mode, op0,
GET_MODE_PRECISION (mode) - 1,
NULL_RTX, 0);
temp = expand_binop (mode, xor_optab, extended, op0, target, 0,
OPTAB_LIB_WIDEN);
if (temp != 0)
temp = expand_binop (mode, result_unsignedp ? sub_optab : subv_optab,
temp, extended, target, 0, OPTAB_LIB_WIDEN);
if (temp != 0)
return temp;
}
return NULL_RTX;
}
rtx
expand_abs (machine_mode mode, rtx op0, rtx target,
int result_unsignedp, int safe)
{
rtx temp;
rtx_code_label *op1;
if (GET_MODE_CLASS (mode) != MODE_INT
|| ! flag_trapv)
result_unsignedp = 1;
temp = expand_abs_nojump (mode, op0, target, result_unsignedp);
if (temp != 0)
return temp;
/* If that does not win, use conditional jump and negate. */
/* It is safe to use the target if it is the same
as the source if this is also a pseudo register */
if (op0 == target && REG_P (op0)
&& REGNO (op0) >= FIRST_PSEUDO_REGISTER)
safe = 1;
op1 = gen_label_rtx ();
if (target == 0 || ! safe
|| GET_MODE (target) != mode
|| (MEM_P (target) && MEM_VOLATILE_P (target))
|| (REG_P (target)
&& REGNO (target) < FIRST_PSEUDO_REGISTER))
target = gen_reg_rtx (mode);
emit_move_insn (target, op0);
NO_DEFER_POP;
do_compare_rtx_and_jump (target, CONST0_RTX (mode), GE, 0, mode,
NULL_RTX, NULL_RTX, op1, -1);
op0 = expand_unop (mode, result_unsignedp ? neg_optab : negv_optab,
target, target, 0);
if (op0 != target)
emit_move_insn (target, op0);
emit_label (op1);
OK_DEFER_POP;
return target;
}
/* Emit code to compute the one's complement absolute value of OP0
(if (OP0 < 0) OP0 = ~OP0), with result to TARGET if convenient.
(TARGET may be NULL_RTX.) The return value says where the result
actually is to be found.
MODE is the mode of the operand; the mode of the result is
different but can be deduced from MODE. */
rtx
expand_one_cmpl_abs_nojump (machine_mode mode, rtx op0, rtx target)
{
rtx temp;
/* Not applicable for floating point modes. */
if (FLOAT_MODE_P (mode))
return NULL_RTX;
/* If we have a MAX insn, we can do this as MAX (x, ~x). */
if (optab_handler (smax_optab, mode) != CODE_FOR_nothing)
{
rtx_insn *last = get_last_insn ();
temp = expand_unop (mode, one_cmpl_optab, op0, NULL_RTX, 0);
if (temp != 0)
temp = expand_binop (mode, smax_optab, op0, temp, target, 0,
OPTAB_WIDEN);
if (temp != 0)
return temp;
delete_insns_since (last);
}
/* If this machine has expensive jumps, we can do one's complement
absolute value of X as (((signed) x >> (W-1)) ^ x). */
if (GET_MODE_CLASS (mode) == MODE_INT
&& BRANCH_COST (optimize_insn_for_speed_p (),
false) >= 2)
{
rtx extended = expand_shift (RSHIFT_EXPR, mode, op0,
GET_MODE_PRECISION (mode) - 1,
NULL_RTX, 0);
temp = expand_binop (mode, xor_optab, extended, op0, target, 0,
OPTAB_LIB_WIDEN);
if (temp != 0)
return temp;
}
return NULL_RTX;
}
/* A subroutine of expand_copysign, perform the copysign operation using the
abs and neg primitives advertised to exist on the target. The assumption
is that we have a split register file, and leaving op0 in fp registers,
and not playing with subregs so much, will help the register allocator. */
static rtx
expand_copysign_absneg (machine_mode mode, rtx op0, rtx op1, rtx target,
int bitpos, bool op0_is_abs)
{
machine_mode imode;
enum insn_code icode;
rtx sign;
rtx_code_label *label;
if (target == op1)
target = NULL_RTX;
/* Check if the back end provides an insn that handles signbit for the
argument's mode. */
icode = optab_handler (signbit_optab, mode);
if (icode != CODE_FOR_nothing)
{
imode = insn_data[(int) icode].operand[0].mode;
sign = gen_reg_rtx (imode);
emit_unop_insn (icode, sign, op1, UNKNOWN);
}
else
{
if (GET_MODE_SIZE (mode) <= UNITS_PER_WORD)
{
imode = int_mode_for_mode (mode);
if (imode == BLKmode)
return NULL_RTX;
op1 = gen_lowpart (imode, op1);
}
else
{
int word;
imode = word_mode;
if (FLOAT_WORDS_BIG_ENDIAN)
word = (GET_MODE_BITSIZE (mode) - bitpos) / BITS_PER_WORD;
else
word = bitpos / BITS_PER_WORD;
bitpos = bitpos % BITS_PER_WORD;
op1 = operand_subword_force (op1, word, mode);
}
wide_int mask = wi::set_bit_in_zero (bitpos, GET_MODE_PRECISION (imode));
sign = expand_binop (imode, and_optab, op1,
immed_wide_int_const (mask, imode),
NULL_RTX, 1, OPTAB_LIB_WIDEN);
}
if (!op0_is_abs)
{
op0 = expand_unop (mode, abs_optab, op0, target, 0);
if (op0 == NULL)
return NULL_RTX;
target = op0;
}
else
{
if (target == NULL_RTX)
target = copy_to_reg (op0);
else
emit_move_insn (target, op0);
}
label = gen_label_rtx ();
emit_cmp_and_jump_insns (sign, const0_rtx, EQ, NULL_RTX, imode, 1, label);
if (CONST_DOUBLE_AS_FLOAT_P (op0))
op0 = simplify_unary_operation (NEG, mode, op0, mode);
else
op0 = expand_unop (mode, neg_optab, op0, target, 0);
if (op0 != target)
emit_move_insn (target, op0);
emit_label (label);
return target;
}
/* A subroutine of expand_copysign, perform the entire copysign operation
with integer bitmasks. BITPOS is the position of the sign bit; OP0_IS_ABS
is true if op0 is known to have its sign bit clear. */
static rtx
expand_copysign_bit (machine_mode mode, rtx op0, rtx op1, rtx target,
int bitpos, bool op0_is_abs)
{
machine_mode imode;
int word, nwords, i;
rtx temp;
rtx_insn *insns;
if (GET_MODE_SIZE (mode) <= UNITS_PER_WORD)
{
imode = int_mode_for_mode (mode);
if (imode == BLKmode)
return NULL_RTX;
word = 0;
nwords = 1;
}
else
{
imode = word_mode;
if (FLOAT_WORDS_BIG_ENDIAN)
word = (GET_MODE_BITSIZE (mode) - bitpos) / BITS_PER_WORD;
else
word = bitpos / BITS_PER_WORD;
bitpos = bitpos % BITS_PER_WORD;
nwords = (GET_MODE_BITSIZE (mode) + BITS_PER_WORD - 1) / BITS_PER_WORD;
}
wide_int mask = wi::set_bit_in_zero (bitpos, GET_MODE_PRECISION (imode));
if (target == 0
|| target == op0
|| target == op1
|| (nwords > 1 && !valid_multiword_target_p (target)))
target = gen_reg_rtx (mode);
if (nwords > 1)
{
start_sequence ();
for (i = 0; i < nwords; ++i)
{
rtx targ_piece = operand_subword (target, i, 1, mode);
rtx op0_piece = operand_subword_force (op0, i, mode);
if (i == word)
{
if (!op0_is_abs)
op0_piece
= expand_binop (imode, and_optab, op0_piece,
immed_wide_int_const (~mask, imode),
NULL_RTX, 1, OPTAB_LIB_WIDEN);
op1 = expand_binop (imode, and_optab,
operand_subword_force (op1, i, mode),
immed_wide_int_const (mask, imode),
NULL_RTX, 1, OPTAB_LIB_WIDEN);
temp = expand_binop (imode, ior_optab, op0_piece, op1,
targ_piece, 1, OPTAB_LIB_WIDEN);
if (temp != targ_piece)
emit_move_insn (targ_piece, temp);
}
else
emit_move_insn (targ_piece, op0_piece);
}
insns = get_insns ();
end_sequence ();
emit_insn (insns);
}
else
{
op1 = expand_binop (imode, and_optab, gen_lowpart (imode, op1),
immed_wide_int_const (mask, imode),
NULL_RTX, 1, OPTAB_LIB_WIDEN);
op0 = gen_lowpart (imode, op0);
if (!op0_is_abs)
op0 = expand_binop (imode, and_optab, op0,
immed_wide_int_const (~mask, imode),
NULL_RTX, 1, OPTAB_LIB_WIDEN);
temp = expand_binop (imode, ior_optab, op0, op1,
gen_lowpart (imode, target), 1, OPTAB_LIB_WIDEN);
target = lowpart_subreg_maybe_copy (mode, temp, imode);
}
return target;
}
/* Expand the C99 copysign operation. OP0 and OP1 must be the same
scalar floating point mode. Return NULL if we do not know how to
expand the operation inline. */
rtx
expand_copysign (rtx op0, rtx op1, rtx target)
{
machine_mode mode = GET_MODE (op0);
const struct real_format *fmt;
bool op0_is_abs;
rtx temp;
gcc_assert (SCALAR_FLOAT_MODE_P (mode));
gcc_assert (GET_MODE (op1) == mode);
/* First try to do it with a special instruction. */
temp = expand_binop (mode, copysign_optab, op0, op1,
target, 0, OPTAB_DIRECT);
if (temp)
return temp;
fmt = REAL_MODE_FORMAT (mode);
if (fmt == NULL || !fmt->has_signed_zero)
return NULL_RTX;
op0_is_abs = false;
if (CONST_DOUBLE_AS_FLOAT_P (op0))
{
if (real_isneg (CONST_DOUBLE_REAL_VALUE (op0)))
op0 = simplify_unary_operation (ABS, mode, op0, mode);
op0_is_abs = true;
}
if (fmt->signbit_ro >= 0
&& (CONST_DOUBLE_AS_FLOAT_P (op0)
|| (optab_handler (neg_optab, mode) != CODE_FOR_nothing
&& optab_handler (abs_optab, mode) != CODE_FOR_nothing)))
{
temp = expand_copysign_absneg (mode, op0, op1, target,
fmt->signbit_ro, op0_is_abs);
if (temp)
return temp;
}
if (fmt->signbit_rw < 0)
return NULL_RTX;
return expand_copysign_bit (mode, op0, op1, target,
fmt->signbit_rw, op0_is_abs);
}
/* Generate an instruction whose insn-code is INSN_CODE,
with two operands: an output TARGET and an input OP0.
TARGET *must* be nonzero, and the output is always stored there.
CODE is an rtx code such that (CODE OP0) is an rtx that describes
the value that is stored into TARGET.
Return false if expansion failed. */
bool
maybe_emit_unop_insn (enum insn_code icode, rtx target, rtx op0,
enum rtx_code code)
{
struct expand_operand ops[2];
rtx pat;
create_output_operand (&ops[0], target, GET_MODE (target));
create_input_operand (&ops[1], op0, GET_MODE (op0));
pat = maybe_gen_insn (icode, 2, ops);
if (!pat)
return false;
if (INSN_P (pat) && NEXT_INSN (as_a (pat)) != NULL_RTX
&& code != UNKNOWN)
add_equal_note (as_a (pat), ops[0].value, code, ops[1].value,
NULL_RTX);
emit_insn (pat);
if (ops[0].value != target)
emit_move_insn (target, ops[0].value);
return true;
}
/* Generate an instruction whose insn-code is INSN_CODE,
with two operands: an output TARGET and an input OP0.
TARGET *must* be nonzero, and the output is always stored there.
CODE is an rtx code such that (CODE OP0) is an rtx that describes
the value that is stored into TARGET. */
void
emit_unop_insn (enum insn_code icode, rtx target, rtx op0, enum rtx_code code)
{
bool ok = maybe_emit_unop_insn (icode, target, op0, code);
gcc_assert (ok);
}
struct no_conflict_data
{
rtx target;
rtx_insn *first, *insn;
bool must_stay;
};
/* Called via note_stores by emit_libcall_block. Set P->must_stay if
the currently examined clobber / store has to stay in the list of
insns that constitute the actual libcall block. */
static void
no_conflict_move_test (rtx dest, const_rtx set, void *p0)
{
struct no_conflict_data *p= (struct no_conflict_data *) p0;
/* If this inns directly contributes to setting the target, it must stay. */
if (reg_overlap_mentioned_p (p->target, dest))
p->must_stay = true;
/* If we haven't committed to keeping any other insns in the list yet,
there is nothing more to check. */
else if (p->insn == p->first)
return;
/* If this insn sets / clobbers a register that feeds one of the insns
already in the list, this insn has to stay too. */
else if (reg_overlap_mentioned_p (dest, PATTERN (p->first))
|| (CALL_P (p->first) && (find_reg_fusage (p->first, USE, dest)))
|| reg_used_between_p (dest, p->first, p->insn)
/* Likewise if this insn depends on a register set by a previous
insn in the list, or if it sets a result (presumably a hard
register) that is set or clobbered by a previous insn.
N.B. the modified_*_p (SET_DEST...) tests applied to a MEM
SET_DEST perform the former check on the address, and the latter
check on the MEM. */
|| (GET_CODE (set) == SET
&& (modified_in_p (SET_SRC (set), p->first)
|| modified_in_p (SET_DEST (set), p->first)
|| modified_between_p (SET_SRC (set), p->first, p->insn)
|| modified_between_p (SET_DEST (set), p->first, p->insn))))
p->must_stay = true;
}
/* Emit code to make a call to a constant function or a library call.
INSNS is a list containing all insns emitted in the call.
These insns leave the result in RESULT. Our block is to copy RESULT
to TARGET, which is logically equivalent to EQUIV.
We first emit any insns that set a pseudo on the assumption that these are
loading constants into registers; doing so allows them to be safely cse'ed
between blocks. Then we emit all the other insns in the block, followed by
an insn to move RESULT to TARGET. This last insn will have a REQ_EQUAL
note with an operand of EQUIV. */
static void
emit_libcall_block_1 (rtx_insn *insns, rtx target, rtx result, rtx equiv,
bool equiv_may_trap)
{
rtx final_dest = target;
rtx_insn *next, *last, *insn;
/* If this is a reg with REG_USERVAR_P set, then it could possibly turn
into a MEM later. Protect the libcall block from this change. */
if (! REG_P (target) || REG_USERVAR_P (target))
target = gen_reg_rtx (GET_MODE (target));
/* If we're using non-call exceptions, a libcall corresponding to an
operation that may trap may also trap. */
/* ??? See the comment in front of make_reg_eh_region_note. */
if (cfun->can_throw_non_call_exceptions
&& (equiv_may_trap || may_trap_p (equiv)))
{
for (insn = insns; insn; insn = NEXT_INSN (insn))
if (CALL_P (insn))
{
rtx note = find_reg_note (insn, REG_EH_REGION, NULL_RTX);
if (note)
{
int lp_nr = INTVAL (XEXP (note, 0));
if (lp_nr == 0 || lp_nr == INT_MIN)
remove_note (insn, note);
}
}
}
else
{
/* Look for any CALL_INSNs in this sequence, and attach a REG_EH_REGION
reg note to indicate that this call cannot throw or execute a nonlocal
goto (unless there is already a REG_EH_REGION note, in which case
we update it). */
for (insn = insns; insn; insn = NEXT_INSN (insn))
if (CALL_P (insn))
make_reg_eh_region_note_nothrow_nononlocal (insn);
}
/* First emit all insns that set pseudos. Remove them from the list as
we go. Avoid insns that set pseudos which were referenced in previous
insns. These can be generated by move_by_pieces, for example,
to update an address. Similarly, avoid insns that reference things
set in previous insns. */
for (insn = insns; insn; insn = next)
{
rtx set = single_set (insn);
next = NEXT_INSN (insn);
if (set != 0 && REG_P (SET_DEST (set))
&& REGNO (SET_DEST (set)) >= FIRST_PSEUDO_REGISTER)
{
struct no_conflict_data data;
data.target = const0_rtx;
data.first = insns;
data.insn = insn;
data.must_stay = 0;
note_stores (PATTERN (insn), no_conflict_move_test, &data);
if (! data.must_stay)
{
if (PREV_INSN (insn))
SET_NEXT_INSN (PREV_INSN (insn)) = next;
else
insns = next;
if (next)
SET_PREV_INSN (next) = PREV_INSN (insn);
add_insn (insn);
}
}
/* Some ports use a loop to copy large arguments onto the stack.
Don't move anything outside such a loop. */
if (LABEL_P (insn))
break;
}
/* Write the remaining insns followed by the final copy. */
for (insn = insns; insn; insn = next)
{
next = NEXT_INSN (insn);
add_insn (insn);
}
last = emit_move_insn (target, result);
set_dst_reg_note (last, REG_EQUAL, copy_rtx (equiv), target);
if (final_dest != target)
emit_move_insn (final_dest, target);
}
void
emit_libcall_block (rtx insns, rtx target, rtx result, rtx equiv)
{
emit_libcall_block_1 (safe_as_a (insns),
target, result, equiv, false);
}
/* Nonzero if we can perform a comparison of mode MODE straightforwardly.
PURPOSE describes how this comparison will be used. CODE is the rtx
comparison code we will be using.
??? Actually, CODE is slightly weaker than that. A target is still
required to implement all of the normal bcc operations, but not
required to implement all (or any) of the unordered bcc operations. */
int
can_compare_p (enum rtx_code code, machine_mode mode,
enum can_compare_purpose purpose)
{
rtx test;
test = gen_rtx_fmt_ee (code, mode, const0_rtx, const0_rtx);
do
{
enum insn_code icode;
if (purpose == ccp_jump
&& (icode = optab_handler (cbranch_optab, mode)) != CODE_FOR_nothing
&& insn_operand_matches (icode, 0, test))
return 1;
if (purpose == ccp_store_flag
&& (icode = optab_handler (cstore_optab, mode)) != CODE_FOR_nothing
&& insn_operand_matches (icode, 1, test))
return 1;
if (purpose == ccp_cmov
&& optab_handler (cmov_optab, mode) != CODE_FOR_nothing)
return 1;
mode = GET_MODE_WIDER_MODE (mode);
PUT_MODE (test, mode);
}
while (mode != VOIDmode);
return 0;
}
/* This function is called when we are going to emit a compare instruction that
compares the values found in *PX and *PY, using the rtl operator COMPARISON.
*PMODE is the mode of the inputs (in case they are const_int).
*PUNSIGNEDP nonzero says that the operands are unsigned;
this matters if they need to be widened (as given by METHODS).
If they have mode BLKmode, then SIZE specifies the size of both operands.
This function performs all the setup necessary so that the caller only has
to emit a single comparison insn. This setup can involve doing a BLKmode
comparison or emitting a library call to perform the comparison if no insn
is available to handle it.
The values which are passed in through pointers can be modified; the caller
should perform the comparison on the modified values. Constant
comparisons must have already been folded. */
static void
prepare_cmp_insn (rtx x, rtx y, enum rtx_code comparison, rtx size,
int unsignedp, enum optab_methods methods,
rtx *ptest, machine_mode *pmode)
{
machine_mode mode = *pmode;
rtx libfunc, test;
machine_mode cmp_mode;
enum mode_class mclass;
/* The other methods are not needed. */
gcc_assert (methods == OPTAB_DIRECT || methods == OPTAB_WIDEN
|| methods == OPTAB_LIB_WIDEN);
/* If we are optimizing, force expensive constants into a register. */
if (CONSTANT_P (x) && optimize
&& (rtx_cost (x, COMPARE, 0, optimize_insn_for_speed_p ())
> COSTS_N_INSNS (1)))
x = force_reg (mode, x);
if (CONSTANT_P (y) && optimize
&& (rtx_cost (y, COMPARE, 1, optimize_insn_for_speed_p ())
> COSTS_N_INSNS (1)))
y = force_reg (mode, y);
#ifdef HAVE_cc0
/* Make sure if we have a canonical comparison. The RTL
documentation states that canonical comparisons are required only
for targets which have cc0. */
gcc_assert (!CONSTANT_P (x) || CONSTANT_P (y));
#endif
/* Don't let both operands fail to indicate the mode. */
if (GET_MODE (x) == VOIDmode && GET_MODE (y) == VOIDmode)
x = force_reg (mode, x);
if (mode == VOIDmode)
mode = GET_MODE (x) != VOIDmode ? GET_MODE (x) : GET_MODE (y);
/* Handle all BLKmode compares. */
if (mode == BLKmode)
{
machine_mode result_mode;
enum insn_code cmp_code;
tree length_type;
rtx libfunc;
rtx result;
rtx opalign
= GEN_INT (MIN (MEM_ALIGN (x), MEM_ALIGN (y)) / BITS_PER_UNIT);
gcc_assert (size);
/* Try to use a memory block compare insn - either cmpstr
or cmpmem will do. */
for (cmp_mode = GET_CLASS_NARROWEST_MODE (MODE_INT);
cmp_mode != VOIDmode;
cmp_mode = GET_MODE_WIDER_MODE (cmp_mode))
{
cmp_code = direct_optab_handler (cmpmem_optab, cmp_mode);
if (cmp_code == CODE_FOR_nothing)
cmp_code = direct_optab_handler (cmpstr_optab, cmp_mode);
if (cmp_code == CODE_FOR_nothing)
cmp_code = direct_optab_handler (cmpstrn_optab, cmp_mode);
if (cmp_code == CODE_FOR_nothing)
continue;
/* Must make sure the size fits the insn's mode. */
if ((CONST_INT_P (size)
&& INTVAL (size) >= (1 << GET_MODE_BITSIZE (cmp_mode)))
|| (GET_MODE_BITSIZE (GET_MODE (size))
> GET_MODE_BITSIZE (cmp_mode)))
continue;
result_mode = insn_data[cmp_code].operand[0].mode;
result = gen_reg_rtx (result_mode);
size = convert_to_mode (cmp_mode, size, 1);
emit_insn (GEN_FCN (cmp_code) (result, x, y, size, opalign));
*ptest = gen_rtx_fmt_ee (comparison, VOIDmode, result, const0_rtx);
*pmode = result_mode;
return;
}
if (methods != OPTAB_LIB && methods != OPTAB_LIB_WIDEN)
goto fail;
/* Otherwise call a library function, memcmp. */
libfunc = memcmp_libfunc;
length_type = sizetype;
result_mode = TYPE_MODE (integer_type_node);
cmp_mode = TYPE_MODE (length_type);
size = convert_to_mode (TYPE_MODE (length_type), size,
TYPE_UNSIGNED (length_type));
result = emit_library_call_value (libfunc, 0, LCT_PURE,
result_mode, 3,
XEXP (x, 0), Pmode,
XEXP (y, 0), Pmode,
size, cmp_mode);
x = result;
y = const0_rtx;
mode = result_mode;
methods = OPTAB_LIB_WIDEN;
unsignedp = false;
}
/* Don't allow operands to the compare to trap, as that can put the
compare and branch in different basic blocks. */
if (cfun->can_throw_non_call_exceptions)
{
if (may_trap_p (x))
x = force_reg (mode, x);
if (may_trap_p (y))
y = force_reg (mode, y);
}
if (GET_MODE_CLASS (mode) == MODE_CC)
{
enum insn_code icode = optab_handler (cbranch_optab, CCmode);
test = gen_rtx_fmt_ee (comparison, VOIDmode, x, y);
gcc_assert (icode != CODE_FOR_nothing
&& insn_operand_matches (icode, 0, test));
*ptest = test;
return;
}
mclass = GET_MODE_CLASS (mode);
test = gen_rtx_fmt_ee (comparison, VOIDmode, x, y);
cmp_mode = mode;
do
{
enum insn_code icode;
icode = optab_handler (cbranch_optab, cmp_mode);
if (icode != CODE_FOR_nothing
&& insn_operand_matches (icode, 0, test))
{
rtx_insn *last = get_last_insn ();
rtx op0 = prepare_operand (icode, x, 1, mode, cmp_mode, unsignedp);
rtx op1 = prepare_operand (icode, y, 2, mode, cmp_mode, unsignedp);
if (op0 && op1
&& insn_operand_matches (icode, 1, op0)
&& insn_operand_matches (icode, 2, op1))
{
XEXP (test, 0) = op0;
XEXP (test, 1) = op1;
*ptest = test;
*pmode = cmp_mode;
return;
}
delete_insns_since (last);
}
if (methods == OPTAB_DIRECT || !CLASS_HAS_WIDER_MODES_P (mclass))
break;
cmp_mode = GET_MODE_WIDER_MODE (cmp_mode);
}
while (cmp_mode != VOIDmode);
if (methods != OPTAB_LIB_WIDEN)
goto fail;
if (!SCALAR_FLOAT_MODE_P (mode))
{
rtx result;
machine_mode ret_mode;
/* Handle a libcall just for the mode we are using. */
libfunc = optab_libfunc (cmp_optab, mode);
gcc_assert (libfunc);
/* If we want unsigned, and this mode has a distinct unsigned
comparison routine, use that. */
if (unsignedp)
{
rtx ulibfunc = optab_libfunc (ucmp_optab, mode);
if (ulibfunc)
libfunc = ulibfunc;
}
ret_mode = targetm.libgcc_cmp_return_mode ();
result = emit_library_call_value (libfunc, NULL_RTX, LCT_CONST,
ret_mode, 2, x, mode, y, mode);
/* There are two kinds of comparison routines. Biased routines
return 0/1/2, and unbiased routines return -1/0/1. Other parts
of gcc expect that the comparison operation is equivalent
to the modified comparison. For signed comparisons compare the
result against 1 in the biased case, and zero in the unbiased
case. For unsigned comparisons always compare against 1 after
biasing the unbiased result by adding 1. This gives us a way to
represent LTU.
The comparisons in the fixed-point helper library are always
biased. */
x = result;
y = const1_rtx;
if (!TARGET_LIB_INT_CMP_BIASED && !ALL_FIXED_POINT_MODE_P (mode))
{
if (unsignedp)
x = plus_constant (ret_mode, result, 1);
else
y = const0_rtx;
}
*pmode = ret_mode;
prepare_cmp_insn (x, y, comparison, NULL_RTX, unsignedp, methods,
ptest, pmode);
}
else
prepare_float_lib_cmp (x, y, comparison, ptest, pmode);
return;
fail:
*ptest = NULL_RTX;
}
/* Before emitting an insn with code ICODE, make sure that X, which is going
to be used for operand OPNUM of the insn, is converted from mode MODE to
WIDER_MODE (UNSIGNEDP determines whether it is an unsigned conversion), and
that it is accepted by the operand predicate. Return the new value. */
rtx
prepare_operand (enum insn_code icode, rtx x, int opnum, machine_mode mode,
machine_mode wider_mode, int unsignedp)
{
if (mode != wider_mode)
x = convert_modes (wider_mode, mode, x, unsignedp);
if (!insn_operand_matches (icode, opnum, x))
{
machine_mode op_mode = insn_data[(int) icode].operand[opnum].mode;
if (reload_completed)
return NULL_RTX;
if (GET_MODE (x) != op_mode && GET_MODE (x) != VOIDmode)
return NULL_RTX;
x = copy_to_mode_reg (op_mode, x);
}
return x;
}
/* Subroutine of emit_cmp_and_jump_insns; this function is called when we know
we can do the branch. */
static void
emit_cmp_and_jump_insn_1 (rtx test, machine_mode mode, rtx label, int prob)
{
machine_mode optab_mode;
enum mode_class mclass;
enum insn_code icode;
rtx_insn *insn;
mclass = GET_MODE_CLASS (mode);
optab_mode = (mclass == MODE_CC) ? CCmode : mode;
icode = optab_handler (cbranch_optab, optab_mode);
gcc_assert (icode != CODE_FOR_nothing);
gcc_assert (insn_operand_matches (icode, 0, test));
insn = emit_jump_insn (GEN_FCN (icode) (test, XEXP (test, 0),
XEXP (test, 1), label));
if (prob != -1
&& profile_status_for_fn (cfun) != PROFILE_ABSENT
&& insn
&& JUMP_P (insn)
&& any_condjump_p (insn)
&& !find_reg_note (insn, REG_BR_PROB, 0))
add_int_reg_note (insn, REG_BR_PROB, prob);
}
/* Generate code to compare X with Y so that the condition codes are
set and to jump to LABEL if the condition is true. If X is a
constant and Y is not a constant, then the comparison is swapped to
ensure that the comparison RTL has the canonical form.
UNSIGNEDP nonzero says that X and Y are unsigned; this matters if they
need to be widened. UNSIGNEDP is also used to select the proper
branch condition code.
If X and Y have mode BLKmode, then SIZE specifies the size of both X and Y.
MODE is the mode of the inputs (in case they are const_int).
COMPARISON is the rtl operator to compare with (EQ, NE, GT, etc.).
It will be potentially converted into an unsigned variant based on
UNSIGNEDP to select a proper jump instruction.
PROB is the probability of jumping to LABEL. */
void
emit_cmp_and_jump_insns (rtx x, rtx y, enum rtx_code comparison, rtx size,
machine_mode mode, int unsignedp, rtx label,
int prob)
{
rtx op0 = x, op1 = y;
rtx test;
/* Swap operands and condition to ensure canonical RTL. */
if (swap_commutative_operands_p (x, y)
&& can_compare_p (swap_condition (comparison), mode, ccp_jump))
{
op0 = y, op1 = x;
comparison = swap_condition (comparison);
}
/* If OP0 is still a constant, then both X and Y must be constants
or the opposite comparison is not supported. Force X into a register
to create canonical RTL. */
if (CONSTANT_P (op0))
op0 = force_reg (mode, op0);
if (unsignedp)
comparison = unsigned_condition (comparison);
prepare_cmp_insn (op0, op1, comparison, size, unsignedp, OPTAB_LIB_WIDEN,
&test, &mode);
emit_cmp_and_jump_insn_1 (test, mode, label, prob);
}
/* Emit a library call comparison between floating point X and Y.
COMPARISON is the rtl operator to compare with (EQ, NE, GT, etc.). */
static void
prepare_float_lib_cmp (rtx x, rtx y, enum rtx_code comparison,
rtx *ptest, machine_mode *pmode)
{
enum rtx_code swapped = swap_condition (comparison);
enum rtx_code reversed = reverse_condition_maybe_unordered (comparison);
machine_mode orig_mode = GET_MODE (x);
machine_mode mode, cmp_mode;
rtx true_rtx, false_rtx;
rtx value, target, equiv;
rtx_insn *insns;
rtx libfunc = 0;
bool reversed_p = false;
cmp_mode = targetm.libgcc_cmp_return_mode ();
for (mode = orig_mode;
mode != VOIDmode;
mode = GET_MODE_WIDER_MODE (mode))
{
if (code_to_optab (comparison)
&& (libfunc = optab_libfunc (code_to_optab (comparison), mode)))
break;
if (code_to_optab (swapped)
&& (libfunc = optab_libfunc (code_to_optab (swapped), mode)))
{
rtx tmp;
tmp = x; x = y; y = tmp;
comparison = swapped;
break;
}
if (code_to_optab (reversed)
&& (libfunc = optab_libfunc (code_to_optab (reversed), mode)))
{
comparison = reversed;
reversed_p = true;
break;
}
}
gcc_assert (mode != VOIDmode);
if (mode != orig_mode)
{
x = convert_to_mode (mode, x, 0);
y = convert_to_mode (mode, y, 0);
}
/* Attach a REG_EQUAL note describing the semantics of the libcall to
the RTL. The allows the RTL optimizers to delete the libcall if the
condition can be determined at compile-time. */
if (comparison == UNORDERED
|| FLOAT_LIB_COMPARE_RETURNS_BOOL (mode, comparison))
{
true_rtx = const_true_rtx;
false_rtx = const0_rtx;
}
else
{
switch (comparison)
{
case EQ:
true_rtx = const0_rtx;
false_rtx = const_true_rtx;
break;
case NE:
true_rtx = const_true_rtx;
false_rtx = const0_rtx;
break;
case GT:
true_rtx = const1_rtx;
false_rtx = const0_rtx;
break;
case GE:
true_rtx = const0_rtx;
false_rtx = constm1_rtx;
break;
case LT:
true_rtx = constm1_rtx;
false_rtx = const0_rtx;
break;
case LE:
true_rtx = const0_rtx;
false_rtx = const1_rtx;
break;
default:
gcc_unreachable ();
}
}
if (comparison == UNORDERED)
{
rtx temp = simplify_gen_relational (NE, cmp_mode, mode, x, x);
equiv = simplify_gen_relational (NE, cmp_mode, mode, y, y);
equiv = simplify_gen_ternary (IF_THEN_ELSE, cmp_mode, cmp_mode,
temp, const_true_rtx, equiv);
}
else
{
equiv = simplify_gen_relational (comparison, cmp_mode, mode, x, y);
if (! FLOAT_LIB_COMPARE_RETURNS_BOOL (mode, comparison))
equiv = simplify_gen_ternary (IF_THEN_ELSE, cmp_mode, cmp_mode,
equiv, true_rtx, false_rtx);
}
start_sequence ();
value = emit_library_call_value (libfunc, NULL_RTX, LCT_CONST,
cmp_mode, 2, x, mode, y, mode);
insns = get_insns ();
end_sequence ();
target = gen_reg_rtx (cmp_mode);
emit_libcall_block (insns, target, value, equiv);
if (comparison == UNORDERED
|| FLOAT_LIB_COMPARE_RETURNS_BOOL (mode, comparison)
|| reversed_p)
*ptest = gen_rtx_fmt_ee (reversed_p ? EQ : NE, VOIDmode, target, false_rtx);
else
*ptest = gen_rtx_fmt_ee (comparison, VOIDmode, target, const0_rtx);
*pmode = cmp_mode;
}
/* Generate code to indirectly jump to a location given in the rtx LOC. */
void
emit_indirect_jump (rtx loc ATTRIBUTE_UNUSED)
{
#ifndef HAVE_indirect_jump
sorry ("indirect jumps are not available on this target");
#else
struct expand_operand ops[1];
create_address_operand (&ops[0], loc);
expand_jump_insn (CODE_FOR_indirect_jump, 1, ops);
emit_barrier ();
#endif
}
#ifdef HAVE_conditional_move
/* Emit a conditional move instruction if the machine supports one for that
condition and machine mode.
OP0 and OP1 are the operands that should be compared using CODE. CMODE is
the mode to use should they be constants. If it is VOIDmode, they cannot
both be constants.
OP2 should be stored in TARGET if the comparison is true, otherwise OP3
should be stored there. MODE is the mode to use should they be constants.
If it is VOIDmode, they cannot both be constants.
The result is either TARGET (perhaps modified) or NULL_RTX if the operation
is not supported. */
rtx
emit_conditional_move (rtx target, enum rtx_code code, rtx op0, rtx op1,
machine_mode cmode, rtx op2, rtx op3,
machine_mode mode, int unsignedp)
{
rtx tem, comparison;
rtx_insn *last;
enum insn_code icode;
enum rtx_code reversed;
/* If one operand is constant, make it the second one. Only do this
if the other operand is not constant as well. */
if (swap_commutative_operands_p (op0, op1))
{
tem = op0;
op0 = op1;
op1 = tem;
code = swap_condition (code);
}
/* get_condition will prefer to generate LT and GT even if the old
comparison was against zero, so undo that canonicalization here since
comparisons against zero are cheaper. */
if (code == LT && op1 == const1_rtx)
code = LE, op1 = const0_rtx;
else if (code == GT && op1 == constm1_rtx)
code = GE, op1 = const0_rtx;
if (cmode == VOIDmode)
cmode = GET_MODE (op0);
if (swap_commutative_operands_p (op2, op3)
&& ((reversed = reversed_comparison_code_parts (code, op0, op1, NULL))
!= UNKNOWN))
{
tem = op2;
op2 = op3;
op3 = tem;
code = reversed;
}
if (mode == VOIDmode)
mode = GET_MODE (op2);
icode = direct_optab_handler (movcc_optab, mode);
if (icode == CODE_FOR_nothing)
return 0;
if (!target)
target = gen_reg_rtx (mode);
code = unsignedp ? unsigned_condition (code) : code;
comparison = simplify_gen_relational (code, VOIDmode, cmode, op0, op1);
/* We can get const0_rtx or const_true_rtx in some circumstances. Just
return NULL and let the caller figure out how best to deal with this
situation. */
if (!COMPARISON_P (comparison))
return NULL_RTX;
saved_pending_stack_adjust save;
save_pending_stack_adjust (&save);
last = get_last_insn ();
do_pending_stack_adjust ();
prepare_cmp_insn (XEXP (comparison, 0), XEXP (comparison, 1),
GET_CODE (comparison), NULL_RTX, unsignedp, OPTAB_WIDEN,
&comparison, &cmode);
if (comparison)
{
struct expand_operand ops[4];
create_output_operand (&ops[0], target, mode);
create_fixed_operand (&ops[1], comparison);
create_input_operand (&ops[2], op2, mode);
create_input_operand (&ops[3], op3, mode);
if (maybe_expand_insn (icode, 4, ops))
{
if (ops[0].value != target)
convert_move (target, ops[0].value, false);
return target;
}
}
delete_insns_since (last);
restore_pending_stack_adjust (&save);
return NULL_RTX;
}
/* Return nonzero if a conditional move of mode MODE is supported.
This function is for combine so it can tell whether an insn that looks
like a conditional move is actually supported by the hardware. If we
guess wrong we lose a bit on optimization, but that's it. */
/* ??? sparc64 supports conditionally moving integers values based on fp
comparisons, and vice versa. How do we handle them? */
int
can_conditionally_move_p (machine_mode mode)
{
if (direct_optab_handler (movcc_optab, mode) != CODE_FOR_nothing)
return 1;
return 0;
}
#endif /* HAVE_conditional_move */
/* Emit a conditional addition instruction if the machine supports one for that
condition and machine mode.
OP0 and OP1 are the operands that should be compared using CODE. CMODE is
the mode to use should they be constants. If it is VOIDmode, they cannot
both be constants.
OP2 should be stored in TARGET if the comparison is false, otherwise OP2+OP3
should be stored there. MODE is the mode to use should they be constants.
If it is VOIDmode, they cannot both be constants.
The result is either TARGET (perhaps modified) or NULL_RTX if the operation
is not supported. */
rtx
emit_conditional_add (rtx target, enum rtx_code code, rtx op0, rtx op1,
machine_mode cmode, rtx op2, rtx op3,
machine_mode mode, int unsignedp)
{
rtx tem, comparison;
rtx_insn *last;
enum insn_code icode;
/* If one operand is constant, make it the second one. Only do this
if the other operand is not constant as well. */
if (swap_commutative_operands_p (op0, op1))
{
tem = op0;
op0 = op1;
op1 = tem;
code = swap_condition (code);
}
/* get_condition will prefer to generate LT and GT even if the old
comparison was against zero, so undo that canonicalization here since
comparisons against zero are cheaper. */
if (code == LT && op1 == const1_rtx)
code = LE, op1 = const0_rtx;
else if (code == GT && op1 == constm1_rtx)
code = GE, op1 = const0_rtx;
if (cmode == VOIDmode)
cmode = GET_MODE (op0);
if (mode == VOIDmode)
mode = GET_MODE (op2);
icode = optab_handler (addcc_optab, mode);
if (icode == CODE_FOR_nothing)
return 0;
if (!target)
target = gen_reg_rtx (mode);
code = unsignedp ? unsigned_condition (code) : code;
comparison = simplify_gen_relational (code, VOIDmode, cmode, op0, op1);
/* We can get const0_rtx or const_true_rtx in some circumstances. Just
return NULL and let the caller figure out how best to deal with this
situation. */
if (!COMPARISON_P (comparison))
return NULL_RTX;
do_pending_stack_adjust ();
last = get_last_insn ();
prepare_cmp_insn (XEXP (comparison, 0), XEXP (comparison, 1),
GET_CODE (comparison), NULL_RTX, unsignedp, OPTAB_WIDEN,
&comparison, &cmode);
if (comparison)
{
struct expand_operand ops[4];
create_output_operand (&ops[0], target, mode);
create_fixed_operand (&ops[1], comparison);
create_input_operand (&ops[2], op2, mode);
create_input_operand (&ops[3], op3, mode);
if (maybe_expand_insn (icode, 4, ops))
{
if (ops[0].value != target)
convert_move (target, ops[0].value, false);
return target;
}
}
delete_insns_since (last);
return NULL_RTX;
}
/* These functions attempt to generate an insn body, rather than
emitting the insn, but if the gen function already emits them, we
make no attempt to turn them back into naked patterns. */
/* Generate and return an insn body to add Y to X. */
rtx
gen_add2_insn (rtx x, rtx y)
{
enum insn_code icode = optab_handler (add_optab, GET_MODE (x));
gcc_assert (insn_operand_matches (icode, 0, x));
gcc_assert (insn_operand_matches (icode, 1, x));
gcc_assert (insn_operand_matches (icode, 2, y));
return GEN_FCN (icode) (x, x, y);
}
/* Generate and return an insn body to add r1 and c,
storing the result in r0. */
rtx
gen_add3_insn (rtx r0, rtx r1, rtx c)
{
enum insn_code icode = optab_handler (add_optab, GET_MODE (r0));
if (icode == CODE_FOR_nothing
|| !insn_operand_matches (icode, 0, r0)
|| !insn_operand_matches (icode, 1, r1)
|| !insn_operand_matches (icode, 2, c))
return NULL_RTX;
return GEN_FCN (icode) (r0, r1, c);
}
int
have_add2_insn (rtx x, rtx y)
{
enum insn_code icode;
gcc_assert (GET_MODE (x) != VOIDmode);
icode = optab_handler (add_optab, GET_MODE (x));
if (icode == CODE_FOR_nothing)
return 0;
if (!insn_operand_matches (icode, 0, x)
|| !insn_operand_matches (icode, 1, x)
|| !insn_operand_matches (icode, 2, y))
return 0;
return 1;
}
/* Generate and return an insn body to add Y to X. */
rtx
gen_addptr3_insn (rtx x, rtx y, rtx z)
{
enum insn_code icode = optab_handler (addptr3_optab, GET_MODE (x));
gcc_assert (insn_operand_matches (icode, 0, x));
gcc_assert (insn_operand_matches (icode, 1, y));
gcc_assert (insn_operand_matches (icode, 2, z));
return GEN_FCN (icode) (x, y, z);
}
/* Return true if the target implements an addptr pattern and X, Y,
and Z are valid for the pattern predicates. */
int
have_addptr3_insn (rtx x, rtx y, rtx z)
{
enum insn_code icode;
gcc_assert (GET_MODE (x) != VOIDmode);
icode = optab_handler (addptr3_optab, GET_MODE (x));
if (icode == CODE_FOR_nothing)
return 0;
if (!insn_operand_matches (icode, 0, x)
|| !insn_operand_matches (icode, 1, y)
|| !insn_operand_matches (icode, 2, z))
return 0;
return 1;
}
/* Generate and return an insn body to subtract Y from X. */
rtx
gen_sub2_insn (rtx x, rtx y)
{
enum insn_code icode = optab_handler (sub_optab, GET_MODE (x));
gcc_assert (insn_operand_matches (icode, 0, x));
gcc_assert (insn_operand_matches (icode, 1, x));
gcc_assert (insn_operand_matches (icode, 2, y));
return GEN_FCN (icode) (x, x, y);
}
/* Generate and return an insn body to subtract r1 and c,
storing the result in r0. */
rtx
gen_sub3_insn (rtx r0, rtx r1, rtx c)
{
enum insn_code icode = optab_handler (sub_optab, GET_MODE (r0));
if (icode == CODE_FOR_nothing
|| !insn_operand_matches (icode, 0, r0)
|| !insn_operand_matches (icode, 1, r1)
|| !insn_operand_matches (icode, 2, c))
return NULL_RTX;
return GEN_FCN (icode) (r0, r1, c);
}
int
have_sub2_insn (rtx x, rtx y)
{
enum insn_code icode;
gcc_assert (GET_MODE (x) != VOIDmode);
icode = optab_handler (sub_optab, GET_MODE (x));
if (icode == CODE_FOR_nothing)
return 0;
if (!insn_operand_matches (icode, 0, x)
|| !insn_operand_matches (icode, 1, x)
|| !insn_operand_matches (icode, 2, y))
return 0;
return 1;
}
/* Return the insn code used to extend FROM_MODE to TO_MODE.
UNSIGNEDP specifies zero-extension instead of sign-extension. If
no such operation exists, CODE_FOR_nothing will be returned. */
enum insn_code
can_extend_p (machine_mode to_mode, machine_mode from_mode,
int unsignedp)
{
convert_optab tab;
#ifdef HAVE_ptr_extend
if (unsignedp < 0)
return CODE_FOR_ptr_extend;
#endif
tab = unsignedp ? zext_optab : sext_optab;
return convert_optab_handler (tab, to_mode, from_mode);
}
/* Generate the body of an insn to extend Y (with mode MFROM)
into X (with mode MTO). Do zero-extension if UNSIGNEDP is nonzero. */
rtx
gen_extend_insn (rtx x, rtx y, machine_mode mto,
machine_mode mfrom, int unsignedp)
{
enum insn_code icode = can_extend_p (mto, mfrom, unsignedp);
return GEN_FCN (icode) (x, y);
}
/* can_fix_p and can_float_p say whether the target machine
can directly convert a given fixed point type to
a given floating point type, or vice versa.
The returned value is the CODE_FOR_... value to use,
or CODE_FOR_nothing if these modes cannot be directly converted.
*TRUNCP_PTR is set to 1 if it is necessary to output
an explicit FTRUNC insn before the fix insn; otherwise 0. */
static enum insn_code
can_fix_p (machine_mode fixmode, machine_mode fltmode,
int unsignedp, int *truncp_ptr)
{
convert_optab tab;
enum insn_code icode;
tab = unsignedp ? ufixtrunc_optab : sfixtrunc_optab;
icode = convert_optab_handler (tab, fixmode, fltmode);
if (icode != CODE_FOR_nothing)
{
*truncp_ptr = 0;
return icode;
}
/* FIXME: This requires a port to define both FIX and FTRUNC pattern
for this to work. We need to rework the fix* and ftrunc* patterns
and documentation. */
tab = unsignedp ? ufix_optab : sfix_optab;
icode = convert_optab_handler (tab, fixmode, fltmode);
if (icode != CODE_FOR_nothing
&& optab_handler (ftrunc_optab, fltmode) != CODE_FOR_nothing)
{
*truncp_ptr = 1;
return icode;
}
*truncp_ptr = 0;
return CODE_FOR_nothing;
}
enum insn_code
can_float_p (machine_mode fltmode, machine_mode fixmode,
int unsignedp)
{
convert_optab tab;
tab = unsignedp ? ufloat_optab : sfloat_optab;
return convert_optab_handler (tab, fltmode, fixmode);
}
/* Function supportable_convert_operation
Check whether an operation represented by the code CODE is a
convert operation that is supported by the target platform in
vector form (i.e., when operating on arguments of type VECTYPE_IN
producing a result of type VECTYPE_OUT).
Convert operations we currently support directly are FIX_TRUNC and FLOAT.
This function checks if these operations are supported
by the target platform either directly (via vector tree-codes), or via
target builtins.
Output:
- CODE1 is code of vector operation to be used when
vectorizing the operation, if available.
- DECL is decl of target builtin functions to be used
when vectorizing the operation, if available. In this case,
CODE1 is CALL_EXPR. */
bool
supportable_convert_operation (enum tree_code code,
tree vectype_out, tree vectype_in,
tree *decl, enum tree_code *code1)
{
machine_mode m1,m2;
int truncp;
m1 = TYPE_MODE (vectype_out);
m2 = TYPE_MODE (vectype_in);
/* First check if we can done conversion directly. */
if ((code == FIX_TRUNC_EXPR
&& can_fix_p (m1,m2,TYPE_UNSIGNED (vectype_out), &truncp)
!= CODE_FOR_nothing)
|| (code == FLOAT_EXPR
&& can_float_p (m1,m2,TYPE_UNSIGNED (vectype_in))
!= CODE_FOR_nothing))
{
*code1 = code;
return true;
}
/* Now check for builtin. */
if (targetm.vectorize.builtin_conversion
&& targetm.vectorize.builtin_conversion (code, vectype_out, vectype_in))
{
*code1 = CALL_EXPR;
*decl = targetm.vectorize.builtin_conversion (code, vectype_out, vectype_in);
return true;
}
return false;
}
/* Generate code to convert FROM to floating point
and store in TO. FROM must be fixed point and not VOIDmode.
UNSIGNEDP nonzero means regard FROM as unsigned.
Normally this is done by correcting the final value
if it is negative. */
void
expand_float (rtx to, rtx from, int unsignedp)
{
enum insn_code icode;
rtx target = to;
machine_mode fmode, imode;
bool can_do_signed = false;
/* Crash now, because we won't be able to decide which mode to use. */
gcc_assert (GET_MODE (from) != VOIDmode);
/* Look for an insn to do the conversion. Do it in the specified
modes if possible; otherwise convert either input, output or both to
wider mode. If the integer mode is wider than the mode of FROM,
we can do the conversion signed even if the input is unsigned. */
for (fmode = GET_MODE (to); fmode != VOIDmode;
fmode = GET_MODE_WIDER_MODE (fmode))
for (imode = GET_MODE (from); imode != VOIDmode;
imode = GET_MODE_WIDER_MODE (imode))
{
int doing_unsigned = unsignedp;
if (fmode != GET_MODE (to)
&& significand_size (fmode) < GET_MODE_PRECISION (GET_MODE (from)))
continue;
icode = can_float_p (fmode, imode, unsignedp);
if (icode == CODE_FOR_nothing && unsignedp)
{
enum insn_code scode = can_float_p (fmode, imode, 0);
if (scode != CODE_FOR_nothing)
can_do_signed = true;
if (imode != GET_MODE (from))
icode = scode, doing_unsigned = 0;
}
if (icode != CODE_FOR_nothing)
{
if (imode != GET_MODE (from))
from = convert_to_mode (imode, from, unsignedp);
if (fmode != GET_MODE (to))
target = gen_reg_rtx (fmode);
emit_unop_insn (icode, target, from,
doing_unsigned ? UNSIGNED_FLOAT : FLOAT);
if (target != to)
convert_move (to, target, 0);
return;
}
}
/* Unsigned integer, and no way to convert directly. Convert as signed,
then unconditionally adjust the result. */
if (unsignedp && can_do_signed)
{
rtx_code_label *label = gen_label_rtx ();
rtx temp;
REAL_VALUE_TYPE offset;
/* Look for a usable floating mode FMODE wider than the source and at
least as wide as the target. Using FMODE will avoid rounding woes
with unsigned values greater than the signed maximum value. */
for (fmode = GET_MODE (to); fmode != VOIDmode;
fmode = GET_MODE_WIDER_MODE (fmode))
if (GET_MODE_PRECISION (GET_MODE (from)) < GET_MODE_BITSIZE (fmode)
&& can_float_p (fmode, GET_MODE (from), 0) != CODE_FOR_nothing)
break;
if (fmode == VOIDmode)
{
/* There is no such mode. Pretend the target is wide enough. */
fmode = GET_MODE (to);
/* Avoid double-rounding when TO is narrower than FROM. */
if ((significand_size (fmode) + 1)
< GET_MODE_PRECISION (GET_MODE (from)))
{
rtx temp1;
rtx_code_label *neglabel = gen_label_rtx ();
/* Don't use TARGET if it isn't a register, is a hard register,
or is the wrong mode. */
if (!REG_P (target)
|| REGNO (target) < FIRST_PSEUDO_REGISTER
|| GET_MODE (target) != fmode)
target = gen_reg_rtx (fmode);
imode = GET_MODE (from);
do_pending_stack_adjust ();
/* Test whether the sign bit is set. */
emit_cmp_and_jump_insns (from, const0_rtx, LT, NULL_RTX, imode,
0, neglabel);
/* The sign bit is not set. Convert as signed. */
expand_float (target, from, 0);
emit_jump_insn (gen_jump (label));
emit_barrier ();
/* The sign bit is set.
Convert to a usable (positive signed) value by shifting right
one bit, while remembering if a nonzero bit was shifted
out; i.e., compute (from & 1) | (from >> 1). */
emit_label (neglabel);
temp = expand_binop (imode, and_optab, from, const1_rtx,
NULL_RTX, 1, OPTAB_LIB_WIDEN);
temp1 = expand_shift (RSHIFT_EXPR, imode, from, 1, NULL_RTX, 1);
temp = expand_binop (imode, ior_optab, temp, temp1, temp, 1,
OPTAB_LIB_WIDEN);
expand_float (target, temp, 0);
/* Multiply by 2 to undo the shift above. */
temp = expand_binop (fmode, add_optab, target, target,
target, 0, OPTAB_LIB_WIDEN);
if (temp != target)
emit_move_insn (target, temp);
do_pending_stack_adjust ();
emit_label (label);
goto done;
}
}
/* If we are about to do some arithmetic to correct for an
unsigned operand, do it in a pseudo-register. */
if (GET_MODE (to) != fmode
|| !REG_P (to) || REGNO (to) < FIRST_PSEUDO_REGISTER)
target = gen_reg_rtx (fmode);
/* Convert as signed integer to floating. */
expand_float (target, from, 0);
/* If FROM is negative (and therefore TO is negative),
correct its value by 2**bitwidth. */
do_pending_stack_adjust ();
emit_cmp_and_jump_insns (from, const0_rtx, GE, NULL_RTX, GET_MODE (from),
0, label);
real_2expN (&offset, GET_MODE_PRECISION (GET_MODE (from)), fmode);
temp = expand_binop (fmode, add_optab, target,
CONST_DOUBLE_FROM_REAL_VALUE (offset, fmode),
target, 0, OPTAB_LIB_WIDEN);
if (temp != target)
emit_move_insn (target, temp);
do_pending_stack_adjust ();
emit_label (label);
goto done;
}
/* No hardware instruction available; call a library routine. */
{
rtx libfunc;
rtx_insn *insns;
rtx value;
convert_optab tab = unsignedp ? ufloat_optab : sfloat_optab;
if (GET_MODE_PRECISION (GET_MODE (from)) < GET_MODE_PRECISION (SImode))
from = convert_to_mode (SImode, from, unsignedp);
libfunc = convert_optab_libfunc (tab, GET_MODE (to), GET_MODE (from));
gcc_assert (libfunc);
start_sequence ();
value = emit_library_call_value (libfunc, NULL_RTX, LCT_CONST,
GET_MODE (to), 1, from,
GET_MODE (from));
insns = get_insns ();
end_sequence ();
emit_libcall_block (insns, target, value,
gen_rtx_fmt_e (unsignedp ? UNSIGNED_FLOAT : FLOAT,
GET_MODE (to), from));
}
done:
/* Copy result to requested destination
if we have been computing in a temp location. */
if (target != to)
{
if (GET_MODE (target) == GET_MODE (to))
emit_move_insn (to, target);
else
convert_move (to, target, 0);
}
}
/* Generate code to convert FROM to fixed point and store in TO. FROM
must be floating point. */
void
expand_fix (rtx to, rtx from, int unsignedp)
{
enum insn_code icode;
rtx target = to;
machine_mode fmode, imode;
int must_trunc = 0;
/* We first try to find a pair of modes, one real and one integer, at
least as wide as FROM and TO, respectively, in which we can open-code
this conversion. If the integer mode is wider than the mode of TO,
we can do the conversion either signed or unsigned. */
for (fmode = GET_MODE (from); fmode != VOIDmode;
fmode = GET_MODE_WIDER_MODE (fmode))
for (imode = GET_MODE (to); imode != VOIDmode;
imode = GET_MODE_WIDER_MODE (imode))
{
int doing_unsigned = unsignedp;
icode = can_fix_p (imode, fmode, unsignedp, &must_trunc);
if (icode == CODE_FOR_nothing && imode != GET_MODE (to) && unsignedp)
icode = can_fix_p (imode, fmode, 0, &must_trunc), doing_unsigned = 0;
if (icode != CODE_FOR_nothing)
{
rtx_insn *last = get_last_insn ();
if (fmode != GET_MODE (from))
from = convert_to_mode (fmode, from, 0);
if (must_trunc)
{
rtx temp = gen_reg_rtx (GET_MODE (from));
from = expand_unop (GET_MODE (from), ftrunc_optab, from,
temp, 0);
}
if (imode != GET_MODE (to))
target = gen_reg_rtx (imode);
if (maybe_emit_unop_insn (icode, target, from,
doing_unsigned ? UNSIGNED_FIX : FIX))
{
if (target != to)
convert_move (to, target, unsignedp);
return;
}
delete_insns_since (last);
}
}
/* For an unsigned conversion, there is one more way to do it.
If we have a signed conversion, we generate code that compares
the real value to the largest representable positive number. If if
is smaller, the conversion is done normally. Otherwise, subtract
one plus the highest signed number, convert, and add it back.
We only need to check all real modes, since we know we didn't find
anything with a wider integer mode.
This code used to extend FP value into mode wider than the destination.
This is needed for decimal float modes which cannot accurately
represent one plus the highest signed number of the same size, but
not for binary modes. Consider, for instance conversion from SFmode
into DImode.
The hot path through the code is dealing with inputs smaller than 2^63
and doing just the conversion, so there is no bits to lose.
In the other path we know the value is positive in the range 2^63..2^64-1
inclusive. (as for other input overflow happens and result is undefined)
So we know that the most important bit set in mantissa corresponds to
2^63. The subtraction of 2^63 should not generate any rounding as it
simply clears out that bit. The rest is trivial. */
if (unsignedp && GET_MODE_PRECISION (GET_MODE (to)) <= HOST_BITS_PER_WIDE_INT)
for (fmode = GET_MODE (from); fmode != VOIDmode;
fmode = GET_MODE_WIDER_MODE (fmode))
if (CODE_FOR_nothing != can_fix_p (GET_MODE (to), fmode, 0, &must_trunc)
&& (!DECIMAL_FLOAT_MODE_P (fmode)
|| GET_MODE_BITSIZE (fmode) > GET_MODE_PRECISION (GET_MODE (to))))
{
int bitsize;
REAL_VALUE_TYPE offset;
rtx limit;
rtx_code_label *lab1, *lab2;
rtx_insn *insn;
bitsize = GET_MODE_PRECISION (GET_MODE (to));
real_2expN (&offset, bitsize - 1, fmode);
limit = CONST_DOUBLE_FROM_REAL_VALUE (offset, fmode);
lab1 = gen_label_rtx ();
lab2 = gen_label_rtx ();
if (fmode != GET_MODE (from))
from = convert_to_mode (fmode, from, 0);
/* See if we need to do the subtraction. */
do_pending_stack_adjust ();
emit_cmp_and_jump_insns (from, limit, GE, NULL_RTX, GET_MODE (from),
0, lab1);
/* If not, do the signed "fix" and branch around fixup code. */
expand_fix (to, from, 0);
emit_jump_insn (gen_jump (lab2));
emit_barrier ();
/* Otherwise, subtract 2**(N-1), convert to signed number,
then add 2**(N-1). Do the addition using XOR since this
will often generate better code. */
emit_label (lab1);
target = expand_binop (GET_MODE (from), sub_optab, from, limit,
NULL_RTX, 0, OPTAB_LIB_WIDEN);
expand_fix (to, target, 0);
target = expand_binop (GET_MODE (to), xor_optab, to,
gen_int_mode
((HOST_WIDE_INT) 1 << (bitsize - 1),
GET_MODE (to)),
to, 1, OPTAB_LIB_WIDEN);
if (target != to)
emit_move_insn (to, target);
emit_label (lab2);
if (optab_handler (mov_optab, GET_MODE (to)) != CODE_FOR_nothing)
{
/* Make a place for a REG_NOTE and add it. */
insn = emit_move_insn (to, to);
set_dst_reg_note (insn, REG_EQUAL,
gen_rtx_fmt_e (UNSIGNED_FIX, GET_MODE (to),
copy_rtx (from)),
to);
}
return;
}
/* We can't do it with an insn, so use a library call. But first ensure
that the mode of TO is at least as wide as SImode, since those are the
only library calls we know about. */
if (GET_MODE_PRECISION (GET_MODE (to)) < GET_MODE_PRECISION (SImode))
{
target = gen_reg_rtx (SImode);
expand_fix (target, from, unsignedp);
}
else
{
rtx_insn *insns;
rtx value;
rtx libfunc;
convert_optab tab = unsignedp ? ufix_optab : sfix_optab;
libfunc = convert_optab_libfunc (tab, GET_MODE (to), GET_MODE (from));
gcc_assert (libfunc);
start_sequence ();
value = emit_library_call_value (libfunc, NULL_RTX, LCT_CONST,
GET_MODE (to), 1, from,
GET_MODE (from));
insns = get_insns ();
end_sequence ();
emit_libcall_block (insns, target, value,
gen_rtx_fmt_e (unsignedp ? UNSIGNED_FIX : FIX,
GET_MODE (to), from));
}
if (target != to)
{
if (GET_MODE (to) == GET_MODE (target))
emit_move_insn (to, target);
else
convert_move (to, target, 0);
}
}
/* Generate code to convert FROM or TO a fixed-point.
If UINTP is true, either TO or FROM is an unsigned integer.
If SATP is true, we need to saturate the result. */
void
expand_fixed_convert (rtx to, rtx from, int uintp, int satp)
{
machine_mode to_mode = GET_MODE (to);
machine_mode from_mode = GET_MODE (from);
convert_optab tab;
enum rtx_code this_code;
enum insn_code code;
rtx_insn *insns;
rtx value;
rtx libfunc;
if (to_mode == from_mode)
{
emit_move_insn (to, from);
return;
}
if (uintp)
{
tab = satp ? satfractuns_optab : fractuns_optab;
this_code = satp ? UNSIGNED_SAT_FRACT : UNSIGNED_FRACT_CONVERT;
}
else
{
tab = satp ? satfract_optab : fract_optab;
this_code = satp ? SAT_FRACT : FRACT_CONVERT;
}
code = convert_optab_handler (tab, to_mode, from_mode);
if (code != CODE_FOR_nothing)
{
emit_unop_insn (code, to, from, this_code);
return;
}
libfunc = convert_optab_libfunc (tab, to_mode, from_mode);
gcc_assert (libfunc);
start_sequence ();
value = emit_library_call_value (libfunc, NULL_RTX, LCT_CONST, to_mode,
1, from, from_mode);
insns = get_insns ();
end_sequence ();
emit_libcall_block (insns, to, value,
gen_rtx_fmt_e (optab_to_code (tab), to_mode, from));
}
/* Generate code to convert FROM to fixed point and store in TO. FROM
must be floating point, TO must be signed. Use the conversion optab
TAB to do the conversion. */
bool
expand_sfix_optab (rtx to, rtx from, convert_optab tab)
{
enum insn_code icode;
rtx target = to;
machine_mode fmode, imode;
/* We first try to find a pair of modes, one real and one integer, at
least as wide as FROM and TO, respectively, in which we can open-code
this conversion. If the integer mode is wider than the mode of TO,
we can do the conversion either signed or unsigned. */
for (fmode = GET_MODE (from); fmode != VOIDmode;
fmode = GET_MODE_WIDER_MODE (fmode))
for (imode = GET_MODE (to); imode != VOIDmode;
imode = GET_MODE_WIDER_MODE (imode))
{
icode = convert_optab_handler (tab, imode, fmode);
if (icode != CODE_FOR_nothing)
{
rtx_insn *last = get_last_insn ();
if (fmode != GET_MODE (from))
from = convert_to_mode (fmode, from, 0);
if (imode != GET_MODE (to))
target = gen_reg_rtx (imode);
if (!maybe_emit_unop_insn (icode, target, from, UNKNOWN))
{
delete_insns_since (last);
continue;
}
if (target != to)
convert_move (to, target, 0);
return true;
}
}
return false;
}
/* Report whether we have an instruction to perform the operation
specified by CODE on operands of mode MODE. */
int
have_insn_for (enum rtx_code code, machine_mode mode)
{
return (code_to_optab (code)
&& (optab_handler (code_to_optab (code), mode)
!= CODE_FOR_nothing));
}
/* Initialize the libfunc fields of an entire group of entries in some
optab. Each entry is set equal to a string consisting of a leading
pair of underscores followed by a generic operation name followed by
a mode name (downshifted to lowercase) followed by a single character
representing the number of operands for the given operation (which is
usually one of the characters '2', '3', or '4').
OPTABLE is the table in which libfunc fields are to be initialized.
OPNAME is the generic (string) name of the operation.
SUFFIX is the character which specifies the number of operands for
the given generic operation.
MODE is the mode to generate for.
*/
static void
gen_libfunc (optab optable, const char *opname, int suffix,
machine_mode mode)
{
unsigned opname_len = strlen (opname);
const char *mname = GET_MODE_NAME (mode);
unsigned mname_len = strlen (mname);
int prefix_len = targetm.libfunc_gnu_prefix ? 6 : 2;
int len = prefix_len + opname_len + mname_len + 1 + 1;
char *libfunc_name = XALLOCAVEC (char, len);
char *p;
const char *q;
p = libfunc_name;
*p++ = '_';
*p++ = '_';
if (targetm.libfunc_gnu_prefix)
{
*p++ = 'g';
*p++ = 'n';
*p++ = 'u';
*p++ = '_';
}
for (q = opname; *q; )
*p++ = *q++;
for (q = mname; *q; q++)
*p++ = TOLOWER (*q);
*p++ = suffix;
*p = '\0';
set_optab_libfunc (optable, mode,
ggc_alloc_string (libfunc_name, p - libfunc_name));
}
/* Like gen_libfunc, but verify that integer operation is involved. */
void
gen_int_libfunc (optab optable, const char *opname, char suffix,
machine_mode mode)
{
int maxsize = 2 * BITS_PER_WORD;
int minsize = BITS_PER_WORD;
if (GET_MODE_CLASS (mode) != MODE_INT)
return;
if (maxsize < LONG_LONG_TYPE_SIZE)
maxsize = LONG_LONG_TYPE_SIZE;
if (minsize > INT_TYPE_SIZE
&& (trapv_binoptab_p (optable)
|| trapv_unoptab_p (optable)))
minsize = INT_TYPE_SIZE;
if (GET_MODE_BITSIZE (mode) < minsize
|| GET_MODE_BITSIZE (mode) > maxsize)
return;
gen_libfunc (optable, opname, suffix, mode);
}
/* Like gen_libfunc, but verify that FP and set decimal prefix if needed. */
void
gen_fp_libfunc (optab optable, const char *opname, char suffix,
machine_mode mode)
{
char *dec_opname;
if (GET_MODE_CLASS (mode) == MODE_FLOAT)
gen_libfunc (optable, opname, suffix, mode);
if (DECIMAL_FLOAT_MODE_P (mode))
{
dec_opname = XALLOCAVEC (char, sizeof (DECIMAL_PREFIX) + strlen (opname));
/* For BID support, change the name to have either a bid_ or dpd_ prefix
depending on the low level floating format used. */
memcpy (dec_opname, DECIMAL_PREFIX, sizeof (DECIMAL_PREFIX) - 1);
strcpy (dec_opname + sizeof (DECIMAL_PREFIX) - 1, opname);
gen_libfunc (optable, dec_opname, suffix, mode);
}
}
/* Like gen_libfunc, but verify that fixed-point operation is involved. */
void
gen_fixed_libfunc (optab optable, const char *opname, char suffix,
machine_mode mode)
{
if (!ALL_FIXED_POINT_MODE_P (mode))
return;
gen_libfunc (optable, opname, suffix, mode);
}
/* Like gen_libfunc, but verify that signed fixed-point operation is
involved. */
void
gen_signed_fixed_libfunc (optab optable, const char *opname, char suffix,
machine_mode mode)
{
if (!SIGNED_FIXED_POINT_MODE_P (mode))
return;
gen_libfunc (optable, opname, suffix, mode);
}
/* Like gen_libfunc, but verify that unsigned fixed-point operation is
involved. */
void
gen_unsigned_fixed_libfunc (optab optable, const char *opname, char suffix,
machine_mode mode)
{
if (!UNSIGNED_FIXED_POINT_MODE_P (mode))
return;
gen_libfunc (optable, opname, suffix, mode);
}
/* Like gen_libfunc, but verify that FP or INT operation is involved. */
void
gen_int_fp_libfunc (optab optable, const char *name, char suffix,
machine_mode mode)
{
if (DECIMAL_FLOAT_MODE_P (mode) || GET_MODE_CLASS (mode) == MODE_FLOAT)
gen_fp_libfunc (optable, name, suffix, mode);
if (INTEGRAL_MODE_P (mode))
gen_int_libfunc (optable, name, suffix, mode);
}
/* Like gen_libfunc, but verify that FP or INT operation is involved
and add 'v' suffix for integer operation. */
void
gen_intv_fp_libfunc (optab optable, const char *name, char suffix,
machine_mode mode)
{
if (DECIMAL_FLOAT_MODE_P (mode) || GET_MODE_CLASS (mode) == MODE_FLOAT)
gen_fp_libfunc (optable, name, suffix, mode);
if (GET_MODE_CLASS (mode) == MODE_INT)
{
int len = strlen (name);
char *v_name = XALLOCAVEC (char, len + 2);
strcpy (v_name, name);
v_name[len] = 'v';
v_name[len + 1] = 0;
gen_int_libfunc (optable, v_name, suffix, mode);
}
}
/* Like gen_libfunc, but verify that FP or INT or FIXED operation is
involved. */
void
gen_int_fp_fixed_libfunc (optab optable, const char *name, char suffix,
machine_mode mode)
{
if (DECIMAL_FLOAT_MODE_P (mode) || GET_MODE_CLASS (mode) == MODE_FLOAT)
gen_fp_libfunc (optable, name, suffix, mode);
if (INTEGRAL_MODE_P (mode))
gen_int_libfunc (optable, name, suffix, mode);
if (ALL_FIXED_POINT_MODE_P (mode))
gen_fixed_libfunc (optable, name, suffix, mode);
}
/* Like gen_libfunc, but verify that FP or INT or signed FIXED operation is
involved. */
void
gen_int_fp_signed_fixed_libfunc (optab optable, const char *name, char suffix,
machine_mode mode)
{
if (DECIMAL_FLOAT_MODE_P (mode) || GET_MODE_CLASS (mode) == MODE_FLOAT)
gen_fp_libfunc (optable, name, suffix, mode);
if (INTEGRAL_MODE_P (mode))
gen_int_libfunc (optable, name, suffix, mode);
if (SIGNED_FIXED_POINT_MODE_P (mode))
gen_signed_fixed_libfunc (optable, name, suffix, mode);
}
/* Like gen_libfunc, but verify that INT or FIXED operation is
involved. */
void
gen_int_fixed_libfunc (optab optable, const char *name, char suffix,
machine_mode mode)
{
if (INTEGRAL_MODE_P (mode))
gen_int_libfunc (optable, name, suffix, mode);
if (ALL_FIXED_POINT_MODE_P (mode))
gen_fixed_libfunc (optable, name, suffix, mode);
}
/* Like gen_libfunc, but verify that INT or signed FIXED operation is
involved. */
void
gen_int_signed_fixed_libfunc (optab optable, const char *name, char suffix,
machine_mode mode)
{
if (INTEGRAL_MODE_P (mode))
gen_int_libfunc (optable, name, suffix, mode);
if (SIGNED_FIXED_POINT_MODE_P (mode))
gen_signed_fixed_libfunc (optable, name, suffix, mode);
}
/* Like gen_libfunc, but verify that INT or unsigned FIXED operation is
involved. */
void
gen_int_unsigned_fixed_libfunc (optab optable, const char *name, char suffix,
machine_mode mode)
{
if (INTEGRAL_MODE_P (mode))
gen_int_libfunc (optable, name, suffix, mode);
if (UNSIGNED_FIXED_POINT_MODE_P (mode))
gen_unsigned_fixed_libfunc (optable, name, suffix, mode);
}
/* Initialize the libfunc fields of an entire group of entries of an
inter-mode-class conversion optab. The string formation rules are
similar to the ones for init_libfuncs, above, but instead of having
a mode name and an operand count these functions have two mode names
and no operand count. */
void
gen_interclass_conv_libfunc (convert_optab tab,
const char *opname,
machine_mode tmode,
machine_mode fmode)
{
size_t opname_len = strlen (opname);
size_t mname_len = 0;
const char *fname, *tname;
const char *q;
int prefix_len = targetm.libfunc_gnu_prefix ? 6 : 2;
char *libfunc_name, *suffix;
char *nondec_name, *dec_name, *nondec_suffix, *dec_suffix;
char *p;
/* If this is a decimal conversion, add the current BID vs. DPD prefix that
depends on which underlying decimal floating point format is used. */
const size_t dec_len = sizeof (DECIMAL_PREFIX) - 1;
mname_len = strlen (GET_MODE_NAME (tmode)) + strlen (GET_MODE_NAME (fmode));
nondec_name = XALLOCAVEC (char, prefix_len + opname_len + mname_len + 1 + 1);
nondec_name[0] = '_';
nondec_name[1] = '_';
if (targetm.libfunc_gnu_prefix)
{
nondec_name[2] = 'g';
nondec_name[3] = 'n';
nondec_name[4] = 'u';
nondec_name[5] = '_';
}
memcpy (&nondec_name[prefix_len], opname, opname_len);
nondec_suffix = nondec_name + opname_len + prefix_len;
dec_name = XALLOCAVEC (char, 2 + dec_len + opname_len + mname_len + 1 + 1);
dec_name[0] = '_';
dec_name[1] = '_';
memcpy (&dec_name[2], DECIMAL_PREFIX, dec_len);
memcpy (&dec_name[2+dec_len], opname, opname_len);
dec_suffix = dec_name + dec_len + opname_len + 2;
fname = GET_MODE_NAME (fmode);
tname = GET_MODE_NAME (tmode);
if (DECIMAL_FLOAT_MODE_P (fmode) || DECIMAL_FLOAT_MODE_P (tmode))
{
libfunc_name = dec_name;
suffix = dec_suffix;
}
else
{
libfunc_name = nondec_name;
suffix = nondec_suffix;
}
p = suffix;
for (q = fname; *q; p++, q++)
*p = TOLOWER (*q);
for (q = tname; *q; p++, q++)
*p = TOLOWER (*q);
*p = '\0';
set_conv_libfunc (tab, tmode, fmode,
ggc_alloc_string (libfunc_name, p - libfunc_name));
}
/* Same as gen_interclass_conv_libfunc but verify that we are producing
int->fp conversion. */
void
gen_int_to_fp_conv_libfunc (convert_optab tab,
const char *opname,
machine_mode tmode,
machine_mode fmode)
{
if (GET_MODE_CLASS (fmode) != MODE_INT)
return;
if (GET_MODE_CLASS (tmode) != MODE_FLOAT && !DECIMAL_FLOAT_MODE_P (tmode))
return;
gen_interclass_conv_libfunc (tab, opname, tmode, fmode);
}
/* ufloat_optab is special by using floatun for FP and floatuns decimal fp
naming scheme. */
void
gen_ufloat_conv_libfunc (convert_optab tab,
const char *opname ATTRIBUTE_UNUSED,
machine_mode tmode,
machine_mode fmode)
{
if (DECIMAL_FLOAT_MODE_P (tmode))
gen_int_to_fp_conv_libfunc (tab, "floatuns", tmode, fmode);
else
gen_int_to_fp_conv_libfunc (tab, "floatun", tmode, fmode);
}
/* Same as gen_interclass_conv_libfunc but verify that we are producing
fp->int conversion. */
void
gen_int_to_fp_nondecimal_conv_libfunc (convert_optab tab,
const char *opname,
machine_mode tmode,
machine_mode fmode)
{
if (GET_MODE_CLASS (fmode) != MODE_INT)
return;
if (GET_MODE_CLASS (tmode) != MODE_FLOAT)
return;
gen_interclass_conv_libfunc (tab, opname, tmode, fmode);
}
/* Same as gen_interclass_conv_libfunc but verify that we are producing
fp->int conversion with no decimal floating point involved. */
void
gen_fp_to_int_conv_libfunc (convert_optab tab,
const char *opname,
machine_mode tmode,
machine_mode fmode)
{
if (GET_MODE_CLASS (fmode) != MODE_FLOAT && !DECIMAL_FLOAT_MODE_P (fmode))
return;
if (GET_MODE_CLASS (tmode) != MODE_INT)
return;
gen_interclass_conv_libfunc (tab, opname, tmode, fmode);
}
/* Initialize the libfunc fields of an of an intra-mode-class conversion optab.
The string formation rules are
similar to the ones for init_libfunc, above. */
void
gen_intraclass_conv_libfunc (convert_optab tab, const char *opname,
machine_mode tmode, machine_mode fmode)
{
size_t opname_len = strlen (opname);
size_t mname_len = 0;
const char *fname, *tname;
const char *q;
int prefix_len = targetm.libfunc_gnu_prefix ? 6 : 2;
char *nondec_name, *dec_name, *nondec_suffix, *dec_suffix;
char *libfunc_name, *suffix;
char *p;
/* If this is a decimal conversion, add the current BID vs. DPD prefix that
depends on which underlying decimal floating point format is used. */
const size_t dec_len = sizeof (DECIMAL_PREFIX) - 1;
mname_len = strlen (GET_MODE_NAME (tmode)) + strlen (GET_MODE_NAME (fmode));
nondec_name = XALLOCAVEC (char, 2 + opname_len + mname_len + 1 + 1);
nondec_name[0] = '_';
nondec_name[1] = '_';
if (targetm.libfunc_gnu_prefix)
{
nondec_name[2] = 'g';
nondec_name[3] = 'n';
nondec_name[4] = 'u';
nondec_name[5] = '_';
}
memcpy (&nondec_name[prefix_len], opname, opname_len);
nondec_suffix = nondec_name + opname_len + prefix_len;
dec_name = XALLOCAVEC (char, 2 + dec_len + opname_len + mname_len + 1 + 1);
dec_name[0] = '_';
dec_name[1] = '_';
memcpy (&dec_name[2], DECIMAL_PREFIX, dec_len);
memcpy (&dec_name[2 + dec_len], opname, opname_len);
dec_suffix = dec_name + dec_len + opname_len + 2;
fname = GET_MODE_NAME (fmode);
tname = GET_MODE_NAME (tmode);
if (DECIMAL_FLOAT_MODE_P (fmode) || DECIMAL_FLOAT_MODE_P (tmode))
{
libfunc_name = dec_name;
suffix = dec_suffix;
}
else
{
libfunc_name = nondec_name;
suffix = nondec_suffix;
}
p = suffix;
for (q = fname; *q; p++, q++)
*p = TOLOWER (*q);
for (q = tname; *q; p++, q++)
*p = TOLOWER (*q);
*p++ = '2';
*p = '\0';
set_conv_libfunc (tab, tmode, fmode,
ggc_alloc_string (libfunc_name, p - libfunc_name));
}
/* Pick proper libcall for trunc_optab. We need to chose if we do
truncation or extension and interclass or intraclass. */
void
gen_trunc_conv_libfunc (convert_optab tab,
const char *opname,
machine_mode tmode,
machine_mode fmode)
{
if (GET_MODE_CLASS (tmode) != MODE_FLOAT && !DECIMAL_FLOAT_MODE_P (tmode))
return;
if (GET_MODE_CLASS (fmode) != MODE_FLOAT && !DECIMAL_FLOAT_MODE_P (fmode))
return;
if (tmode == fmode)
return;
if ((GET_MODE_CLASS (tmode) == MODE_FLOAT && DECIMAL_FLOAT_MODE_P (fmode))
|| (GET_MODE_CLASS (fmode) == MODE_FLOAT && DECIMAL_FLOAT_MODE_P (tmode)))
gen_interclass_conv_libfunc (tab, opname, tmode, fmode);
if (GET_MODE_PRECISION (fmode) <= GET_MODE_PRECISION (tmode))
return;
if ((GET_MODE_CLASS (tmode) == MODE_FLOAT
&& GET_MODE_CLASS (fmode) == MODE_FLOAT)
|| (DECIMAL_FLOAT_MODE_P (fmode) && DECIMAL_FLOAT_MODE_P (tmode)))
gen_intraclass_conv_libfunc (tab, opname, tmode, fmode);
}
/* Pick proper libcall for extend_optab. We need to chose if we do
truncation or extension and interclass or intraclass. */
void
gen_extend_conv_libfunc (convert_optab tab,
const char *opname ATTRIBUTE_UNUSED,
machine_mode tmode,
machine_mode fmode)
{
if (GET_MODE_CLASS (tmode) != MODE_FLOAT && !DECIMAL_FLOAT_MODE_P (tmode))
return;
if (GET_MODE_CLASS (fmode) != MODE_FLOAT && !DECIMAL_FLOAT_MODE_P (fmode))
return;
if (tmode == fmode)
return;
if ((GET_MODE_CLASS (tmode) == MODE_FLOAT && DECIMAL_FLOAT_MODE_P (fmode))
|| (GET_MODE_CLASS (fmode) == MODE_FLOAT && DECIMAL_FLOAT_MODE_P (tmode)))
gen_interclass_conv_libfunc (tab, opname, tmode, fmode);
if (GET_MODE_PRECISION (fmode) > GET_MODE_PRECISION (tmode))
return;
if ((GET_MODE_CLASS (tmode) == MODE_FLOAT
&& GET_MODE_CLASS (fmode) == MODE_FLOAT)
|| (DECIMAL_FLOAT_MODE_P (fmode) && DECIMAL_FLOAT_MODE_P (tmode)))
gen_intraclass_conv_libfunc (tab, opname, tmode, fmode);
}
/* Pick proper libcall for fract_optab. We need to chose if we do
interclass or intraclass. */
void
gen_fract_conv_libfunc (convert_optab tab,
const char *opname,
machine_mode tmode,
machine_mode fmode)
{
if (tmode == fmode)
return;
if (!(ALL_FIXED_POINT_MODE_P (tmode) || ALL_FIXED_POINT_MODE_P (fmode)))
return;
if (GET_MODE_CLASS (tmode) == GET_MODE_CLASS (fmode))
gen_intraclass_conv_libfunc (tab, opname, tmode, fmode);
else
gen_interclass_conv_libfunc (tab, opname, tmode, fmode);
}
/* Pick proper libcall for fractuns_optab. */
void
gen_fractuns_conv_libfunc (convert_optab tab,
const char *opname,
machine_mode tmode,
machine_mode fmode)
{
if (tmode == fmode)
return;
/* One mode must be a fixed-point mode, and the other must be an integer
mode. */
if (!((ALL_FIXED_POINT_MODE_P (tmode) && GET_MODE_CLASS (fmode) == MODE_INT)
|| (ALL_FIXED_POINT_MODE_P (fmode)
&& GET_MODE_CLASS (tmode) == MODE_INT)))
return;
gen_interclass_conv_libfunc (tab, opname, tmode, fmode);
}
/* Pick proper libcall for satfract_optab. We need to chose if we do
interclass or intraclass. */
void
gen_satfract_conv_libfunc (convert_optab tab,
const char *opname,
machine_mode tmode,
machine_mode fmode)
{
if (tmode == fmode)
return;
/* TMODE must be a fixed-point mode. */
if (!ALL_FIXED_POINT_MODE_P (tmode))
return;
if (GET_MODE_CLASS (tmode) == GET_MODE_CLASS (fmode))
gen_intraclass_conv_libfunc (tab, opname, tmode, fmode);
else
gen_interclass_conv_libfunc (tab, opname, tmode, fmode);
}
/* Pick proper libcall for satfractuns_optab. */
void
gen_satfractuns_conv_libfunc (convert_optab tab,
const char *opname,
machine_mode tmode,
machine_mode fmode)
{
if (tmode == fmode)
return;
/* TMODE must be a fixed-point mode, and FMODE must be an integer mode. */
if (!(ALL_FIXED_POINT_MODE_P (tmode) && GET_MODE_CLASS (fmode) == MODE_INT))
return;
gen_interclass_conv_libfunc (tab, opname, tmode, fmode);
}
/* Hashtable callbacks for libfunc_decls. */
struct libfunc_decl_hasher : ggc_hasher
{
static hashval_t
hash (tree entry)
{
return IDENTIFIER_HASH_VALUE (DECL_NAME (entry));
}
static bool
equal (tree decl, tree name)
{
return DECL_NAME (decl) == name;
}
};
/* A table of previously-created libfuncs, hashed by name. */
static GTY (()) hash_table *libfunc_decls;
/* Build a decl for a libfunc named NAME. */
tree
build_libfunc_function (const char *name)
{
tree decl = build_decl (UNKNOWN_LOCATION, FUNCTION_DECL,
get_identifier (name),
build_function_type (integer_type_node, NULL_TREE));
/* ??? We don't have any type information except for this is
a function. Pretend this is "int foo()". */
DECL_ARTIFICIAL (decl) = 1;
DECL_EXTERNAL (decl) = 1;
TREE_PUBLIC (decl) = 1;
gcc_assert (DECL_ASSEMBLER_NAME (decl));
/* Zap the nonsensical SYMBOL_REF_DECL for this. What we're left with
are the flags assigned by targetm.encode_section_info. */
SET_SYMBOL_REF_DECL (XEXP (DECL_RTL (decl), 0), NULL);
return decl;
}
rtx
init_one_libfunc (const char *name)
{
tree id, decl;
hashval_t hash;
if (libfunc_decls == NULL)
libfunc_decls = hash_table::create_ggc (37);
/* See if we have already created a libfunc decl for this function. */
id = get_identifier (name);
hash = IDENTIFIER_HASH_VALUE (id);
tree *slot = libfunc_decls->find_slot_with_hash (id, hash, INSERT);
decl = *slot;
if (decl == NULL)
{
/* Create a new decl, so that it can be passed to
targetm.encode_section_info. */
decl = build_libfunc_function (name);
*slot = decl;
}
return XEXP (DECL_RTL (decl), 0);
}
/* Adjust the assembler name of libfunc NAME to ASMSPEC. */
rtx
set_user_assembler_libfunc (const char *name, const char *asmspec)
{
tree id, decl;
hashval_t hash;
id = get_identifier (name);
hash = IDENTIFIER_HASH_VALUE (id);
tree *slot = libfunc_decls->find_slot_with_hash (id, hash, NO_INSERT);
gcc_assert (slot);
decl = (tree) *slot;
set_user_assembler_name (decl, asmspec);
return XEXP (DECL_RTL (decl), 0);
}
/* Call this to reset the function entry for one optab (OPTABLE) in mode
MODE to NAME, which should be either 0 or a string constant. */
void
set_optab_libfunc (optab op, machine_mode mode, const char *name)
{
rtx val;
struct libfunc_entry e;
struct libfunc_entry **slot;
e.op = op;
e.mode1 = mode;
e.mode2 = VOIDmode;
if (name)
val = init_one_libfunc (name);
else
val = 0;
slot = libfunc_hash->find_slot (&e, INSERT);
if (*slot == NULL)
*slot = ggc_alloc ();
(*slot)->op = op;
(*slot)->mode1 = mode;
(*slot)->mode2 = VOIDmode;
(*slot)->libfunc = val;
}
/* Call this to reset the function entry for one conversion optab
(OPTABLE) from mode FMODE to mode TMODE to NAME, which should be
either 0 or a string constant. */
void
set_conv_libfunc (convert_optab optab, machine_mode tmode,
machine_mode fmode, const char *name)
{
rtx val;
struct libfunc_entry e;
struct libfunc_entry **slot;
e.op = optab;
e.mode1 = tmode;
e.mode2 = fmode;
if (name)
val = init_one_libfunc (name);
else
val = 0;
slot = libfunc_hash->find_slot (&e, INSERT);
if (*slot == NULL)
*slot = ggc_alloc ();
(*slot)->op = optab;
(*slot)->mode1 = tmode;
(*slot)->mode2 = fmode;
(*slot)->libfunc = val;
}
/* Call this to initialize the contents of the optabs
appropriately for the current target machine. */
void
init_optabs (void)
{
if (libfunc_hash)
libfunc_hash->empty ();
else
libfunc_hash = hash_table::create_ggc (10);
/* Fill in the optabs with the insns we support. */
init_all_optabs (this_fn_optabs);
/* The ffs function operates on `int'. Fall back on it if we do not
have a libgcc2 function for that width. */
if (INT_TYPE_SIZE < BITS_PER_WORD)
set_optab_libfunc (ffs_optab, mode_for_size (INT_TYPE_SIZE, MODE_INT, 0),
"ffs");
/* Explicitly initialize the bswap libfuncs since we need them to be
valid for things other than word_mode. */
if (targetm.libfunc_gnu_prefix)
{
set_optab_libfunc (bswap_optab, SImode, "__gnu_bswapsi2");
set_optab_libfunc (bswap_optab, DImode, "__gnu_bswapdi2");
}
else
{
set_optab_libfunc (bswap_optab, SImode, "__bswapsi2");
set_optab_libfunc (bswap_optab, DImode, "__bswapdi2");
}
/* Use cabs for double complex abs, since systems generally have cabs.
Don't define any libcall for float complex, so that cabs will be used. */
if (complex_double_type_node)
set_optab_libfunc (abs_optab, TYPE_MODE (complex_double_type_node),
"cabs");
abort_libfunc = init_one_libfunc ("abort");
memcpy_libfunc = init_one_libfunc ("memcpy");
memmove_libfunc = init_one_libfunc ("memmove");
memcmp_libfunc = init_one_libfunc ("memcmp");
memset_libfunc = init_one_libfunc ("memset");
setbits_libfunc = init_one_libfunc ("__setbits");
#ifndef DONT_USE_BUILTIN_SETJMP
setjmp_libfunc = init_one_libfunc ("__builtin_setjmp");
longjmp_libfunc = init_one_libfunc ("__builtin_longjmp");
#else
setjmp_libfunc = init_one_libfunc ("setjmp");
longjmp_libfunc = init_one_libfunc ("longjmp");
#endif
unwind_sjlj_register_libfunc = init_one_libfunc ("_Unwind_SjLj_Register");
unwind_sjlj_unregister_libfunc
= init_one_libfunc ("_Unwind_SjLj_Unregister");
/* For function entry/exit instrumentation. */
profile_function_entry_libfunc
= init_one_libfunc ("__cyg_profile_func_enter");
profile_function_exit_libfunc
= init_one_libfunc ("__cyg_profile_func_exit");
gcov_flush_libfunc = init_one_libfunc ("__gcov_flush");
/* Allow the target to add more libcalls or rename some, etc. */
targetm.init_libfuncs ();
}
/* Use the current target and options to initialize
TREE_OPTIMIZATION_OPTABS (OPTNODE). */
void
init_tree_optimization_optabs (tree optnode)
{
/* Quick exit if we have already computed optabs for this target. */
if (TREE_OPTIMIZATION_BASE_OPTABS (optnode) == this_target_optabs)
return;
/* Forget any previous information and set up for the current target. */
TREE_OPTIMIZATION_BASE_OPTABS (optnode) = this_target_optabs;
struct target_optabs *tmp_optabs = (struct target_optabs *)
TREE_OPTIMIZATION_OPTABS (optnode);
if (tmp_optabs)
memset (tmp_optabs, 0, sizeof (struct target_optabs));
else
tmp_optabs = ggc_alloc ();
/* Generate a new set of optabs into tmp_optabs. */
init_all_optabs (tmp_optabs);
/* If the optabs changed, record it. */
if (memcmp (tmp_optabs, this_target_optabs, sizeof (struct target_optabs)))
TREE_OPTIMIZATION_OPTABS (optnode) = tmp_optabs;
else
{
TREE_OPTIMIZATION_OPTABS (optnode) = NULL;
ggc_free (tmp_optabs);
}
}
/* A helper function for init_sync_libfuncs. Using the basename BASE,
install libfuncs into TAB for BASE_N for 1 <= N <= MAX. */
static void
init_sync_libfuncs_1 (optab tab, const char *base, int max)
{
machine_mode mode;
char buf[64];
size_t len = strlen (base);
int i;
gcc_assert (max <= 8);
gcc_assert (len + 3 < sizeof (buf));
memcpy (buf, base, len);
buf[len] = '_';
buf[len + 1] = '0';
buf[len + 2] = '\0';
mode = QImode;
for (i = 1; i <= max; i *= 2)
{
buf[len + 1] = '0' + i;
set_optab_libfunc (tab, mode, buf);
mode = GET_MODE_2XWIDER_MODE (mode);
}
}
void
init_sync_libfuncs (int max)
{
if (!flag_sync_libcalls)
return;
init_sync_libfuncs_1 (sync_compare_and_swap_optab,
"__sync_val_compare_and_swap", max);
init_sync_libfuncs_1 (sync_lock_test_and_set_optab,
"__sync_lock_test_and_set", max);
init_sync_libfuncs_1 (sync_old_add_optab, "__sync_fetch_and_add", max);
init_sync_libfuncs_1 (sync_old_sub_optab, "__sync_fetch_and_sub", max);
init_sync_libfuncs_1 (sync_old_ior_optab, "__sync_fetch_and_or", max);
init_sync_libfuncs_1 (sync_old_and_optab, "__sync_fetch_and_and", max);
init_sync_libfuncs_1 (sync_old_xor_optab, "__sync_fetch_and_xor", max);
init_sync_libfuncs_1 (sync_old_nand_optab, "__sync_fetch_and_nand", max);
init_sync_libfuncs_1 (sync_new_add_optab, "__sync_add_and_fetch", max);
init_sync_libfuncs_1 (sync_new_sub_optab, "__sync_sub_and_fetch", max);
init_sync_libfuncs_1 (sync_new_ior_optab, "__sync_or_and_fetch", max);
init_sync_libfuncs_1 (sync_new_and_optab, "__sync_and_and_fetch", max);
init_sync_libfuncs_1 (sync_new_xor_optab, "__sync_xor_and_fetch", max);
init_sync_libfuncs_1 (sync_new_nand_optab, "__sync_nand_and_fetch", max);
}
/* Print information about the current contents of the optabs on
STDERR. */
DEBUG_FUNCTION void
debug_optab_libfuncs (void)
{
int i, j, k;
/* Dump the arithmetic optabs. */
for (i = FIRST_NORM_OPTAB; i <= LAST_NORMLIB_OPTAB; ++i)
for (j = 0; j < NUM_MACHINE_MODES; ++j)
{
rtx l = optab_libfunc ((optab) i, (machine_mode) j);
if (l)
{
gcc_assert (GET_CODE (l) == SYMBOL_REF);
fprintf (stderr, "%s\t%s:\t%s\n",
GET_RTX_NAME (optab_to_code ((optab) i)),
GET_MODE_NAME (j),
XSTR (l, 0));
}
}
/* Dump the conversion optabs. */
for (i = FIRST_CONV_OPTAB; i <= LAST_CONVLIB_OPTAB; ++i)
for (j = 0; j < NUM_MACHINE_MODES; ++j)
for (k = 0; k < NUM_MACHINE_MODES; ++k)
{
rtx l = convert_optab_libfunc ((optab) i, (machine_mode) j,
(machine_mode) k);
if (l)
{
gcc_assert (GET_CODE (l) == SYMBOL_REF);
fprintf (stderr, "%s\t%s\t%s:\t%s\n",
GET_RTX_NAME (optab_to_code ((optab) i)),
GET_MODE_NAME (j),
GET_MODE_NAME (k),
XSTR (l, 0));
}
}
}
/* Generate insns to trap with code TCODE if OP1 and OP2 satisfy condition
CODE. Return 0 on failure. */
rtx
gen_cond_trap (enum rtx_code code, rtx op1, rtx op2, rtx tcode)
{
machine_mode mode = GET_MODE (op1);
enum insn_code icode;
rtx insn;
rtx trap_rtx;
if (mode == VOIDmode)
return 0;
icode = optab_handler (ctrap_optab, mode);
if (icode == CODE_FOR_nothing)
return 0;
/* Some targets only accept a zero trap code. */
if (!insn_operand_matches (icode, 3, tcode))
return 0;
do_pending_stack_adjust ();
start_sequence ();
prepare_cmp_insn (op1, op2, code, NULL_RTX, false, OPTAB_DIRECT,
&trap_rtx, &mode);
if (!trap_rtx)
insn = NULL_RTX;
else
insn = GEN_FCN (icode) (trap_rtx, XEXP (trap_rtx, 0), XEXP (trap_rtx, 1),
tcode);
/* If that failed, then give up. */
if (insn == 0)
{
end_sequence ();
return 0;
}
emit_insn (insn);
insn = get_insns ();
end_sequence ();
return insn;
}
/* Return rtx code for TCODE. Use UNSIGNEDP to select signed
or unsigned operation code. */
enum rtx_code
get_rtx_code (enum tree_code tcode, bool unsignedp)
{
enum rtx_code code;
switch (tcode)
{
case EQ_EXPR:
code = EQ;
break;
case NE_EXPR:
code = NE;
break;
case LT_EXPR:
code = unsignedp ? LTU : LT;
break;
case LE_EXPR:
code = unsignedp ? LEU : LE;
break;
case GT_EXPR:
code = unsignedp ? GTU : GT;
break;
case GE_EXPR:
code = unsignedp ? GEU : GE;
break;
case UNORDERED_EXPR:
code = UNORDERED;
break;
case ORDERED_EXPR:
code = ORDERED;
break;
case UNLT_EXPR:
code = UNLT;
break;
case UNLE_EXPR:
code = UNLE;
break;
case UNGT_EXPR:
code = UNGT;
break;
case UNGE_EXPR:
code = UNGE;
break;
case UNEQ_EXPR:
code = UNEQ;
break;
case LTGT_EXPR:
code = LTGT;
break;
case BIT_AND_EXPR:
code = AND;
break;
case BIT_IOR_EXPR:
code = IOR;
break;
default:
gcc_unreachable ();
}
return code;
}
/* Return comparison rtx for COND. Use UNSIGNEDP to select signed or
unsigned operators. Do not generate compare instruction. */
static rtx
vector_compare_rtx (enum tree_code tcode, tree t_op0, tree t_op1,
bool unsignedp, enum insn_code icode)
{
struct expand_operand ops[2];
rtx rtx_op0, rtx_op1;
enum rtx_code rcode = get_rtx_code (tcode, unsignedp);
gcc_assert (TREE_CODE_CLASS (tcode) == tcc_comparison);
/* Expand operands. */
rtx_op0 = expand_expr (t_op0, NULL_RTX, TYPE_MODE (TREE_TYPE (t_op0)),
EXPAND_STACK_PARM);
rtx_op1 = expand_expr (t_op1, NULL_RTX, TYPE_MODE (TREE_TYPE (t_op1)),
EXPAND_STACK_PARM);
create_input_operand (&ops[0], rtx_op0, GET_MODE (rtx_op0));
create_input_operand (&ops[1], rtx_op1, GET_MODE (rtx_op1));
if (!maybe_legitimize_operands (icode, 4, 2, ops))
gcc_unreachable ();
return gen_rtx_fmt_ee (rcode, VOIDmode, ops[0].value, ops[1].value);
}
/* Return true if VEC_PERM_EXPR of arbitrary input vectors can be expanded using
SIMD extensions of the CPU. SEL may be NULL, which stands for an unknown
constant. Note that additional permutations representing whole-vector shifts
may also be handled via the vec_shr optab, but only where the second input
vector is entirely constant zeroes; this case is not dealt with here. */
bool
can_vec_perm_p (machine_mode mode, bool variable,
const unsigned char *sel)
{
machine_mode qimode;
/* If the target doesn't implement a vector mode for the vector type,
then no operations are supported. */
if (!VECTOR_MODE_P (mode))
return false;
if (!variable)
{
if (direct_optab_handler (vec_perm_const_optab, mode) != CODE_FOR_nothing
&& (sel == NULL
|| targetm.vectorize.vec_perm_const_ok == NULL
|| targetm.vectorize.vec_perm_const_ok (mode, sel)))
return true;
}
if (direct_optab_handler (vec_perm_optab, mode) != CODE_FOR_nothing)
return true;
/* We allow fallback to a QI vector mode, and adjust the mask. */
if (GET_MODE_INNER (mode) == QImode)
return false;
qimode = mode_for_vector (QImode, GET_MODE_SIZE (mode));
if (!VECTOR_MODE_P (qimode))
return false;
/* ??? For completeness, we ought to check the QImode version of
vec_perm_const_optab. But all users of this implicit lowering
feature implement the variable vec_perm_optab. */
if (direct_optab_handler (vec_perm_optab, qimode) == CODE_FOR_nothing)
return false;
/* In order to support the lowering of variable permutations,
we need to support shifts and adds. */
if (variable)
{
if (GET_MODE_UNIT_SIZE (mode) > 2
&& optab_handler (ashl_optab, mode) == CODE_FOR_nothing
&& optab_handler (vashl_optab, mode) == CODE_FOR_nothing)
return false;
if (optab_handler (add_optab, qimode) == CODE_FOR_nothing)
return false;
}
return true;
}
/* Checks if vec_perm mask SEL is a constant equivalent to a shift of the first
vec_perm operand, assuming the second operand is a constant vector of zeroes.
Return the shift distance in bits if so, or NULL_RTX if the vec_perm is not a
shift. */
static rtx
shift_amt_for_vec_perm_mask (rtx sel)
{
unsigned int i, first, nelt = GET_MODE_NUNITS (GET_MODE (sel));
unsigned int bitsize = GET_MODE_BITSIZE (GET_MODE_INNER (GET_MODE (sel)));
if (GET_CODE (sel) != CONST_VECTOR)
return NULL_RTX;
first = INTVAL (CONST_VECTOR_ELT (sel, 0));
if (first >= 2*nelt)
return NULL_RTX;
for (i = 1; i < nelt; i++)
{
int idx = INTVAL (CONST_VECTOR_ELT (sel, i));
unsigned int expected = (i + first) & (2 * nelt - 1);
/* Indices into the second vector are all equivalent. */
if (idx < 0 || (MIN (nelt, (unsigned) idx) != MIN (nelt, expected)))
return NULL_RTX;
}
return GEN_INT (first * bitsize);
}
/* A subroutine of expand_vec_perm for expanding one vec_perm insn. */
static rtx
expand_vec_perm_1 (enum insn_code icode, rtx target,
rtx v0, rtx v1, rtx sel)
{
machine_mode tmode = GET_MODE (target);
machine_mode smode = GET_MODE (sel);
struct expand_operand ops[4];
create_output_operand (&ops[0], target, tmode);
create_input_operand (&ops[3], sel, smode);
/* Make an effort to preserve v0 == v1. The target expander is able to
rely on this to determine if we're permuting a single input operand. */
if (rtx_equal_p (v0, v1))
{
if (!insn_operand_matches (icode, 1, v0))
v0 = force_reg (tmode, v0);
gcc_checking_assert (insn_operand_matches (icode, 1, v0));
gcc_checking_assert (insn_operand_matches (icode, 2, v0));
create_fixed_operand (&ops[1], v0);
create_fixed_operand (&ops[2], v0);
}
else
{
create_input_operand (&ops[1], v0, tmode);
/* See if this can be handled with a vec_shr. We only do this if the
second vector is all zeroes. */
enum insn_code shift_code = optab_handler (vec_shr_optab, GET_MODE (v0));
if (v1 == CONST0_RTX (GET_MODE (v1)) && shift_code)
if (rtx shift_amt = shift_amt_for_vec_perm_mask (sel))
{
create_convert_operand_from_type (&ops[2], shift_amt,
sizetype_tab[(int) stk_sizetype]);
if (maybe_expand_insn (shift_code, 3, ops))
return ops[0].value;
}
create_input_operand (&ops[2], v1, tmode);
}
if (maybe_expand_insn (icode, 4, ops))
return ops[0].value;
return NULL_RTX;
}
/* Generate instructions for vec_perm optab given its mode
and three operands. */
rtx
expand_vec_perm (machine_mode mode, rtx v0, rtx v1, rtx sel, rtx target)
{
enum insn_code icode;
machine_mode qimode;
unsigned int i, w, e, u;
rtx tmp, sel_qi = NULL;
rtvec vec;
if (!target || GET_MODE (target) != mode)
target = gen_reg_rtx (mode);
w = GET_MODE_SIZE (mode);
e = GET_MODE_NUNITS (mode);
u = GET_MODE_UNIT_SIZE (mode);
/* Set QIMODE to a different vector mode with byte elements.
If no such mode, or if MODE already has byte elements, use VOIDmode. */
qimode = VOIDmode;
if (GET_MODE_INNER (mode) != QImode)
{
qimode = mode_for_vector (QImode, w);
if (!VECTOR_MODE_P (qimode))
qimode = VOIDmode;
}
/* If the input is a constant, expand it specially. */
gcc_assert (GET_MODE_CLASS (GET_MODE (sel)) == MODE_VECTOR_INT);
if (GET_CODE (sel) == CONST_VECTOR)
{
icode = direct_optab_handler (vec_perm_const_optab, mode);
if (icode != CODE_FOR_nothing)
{
tmp = expand_vec_perm_1 (icode, target, v0, v1, sel);
if (tmp)
return tmp;
}
/* Fall back to a constant byte-based permutation. */
if (qimode != VOIDmode)
{
vec = rtvec_alloc (w);
for (i = 0; i < e; ++i)
{
unsigned int j, this_e;
this_e = INTVAL (CONST_VECTOR_ELT (sel, i));
this_e &= 2 * e - 1;
this_e *= u;
for (j = 0; j < u; ++j)
RTVEC_ELT (vec, i * u + j) = GEN_INT (this_e + j);
}
sel_qi = gen_rtx_CONST_VECTOR (qimode, vec);
icode = direct_optab_handler (vec_perm_const_optab, qimode);
if (icode != CODE_FOR_nothing)
{
tmp = mode != qimode ? gen_reg_rtx (qimode) : target;
tmp = expand_vec_perm_1 (icode, tmp, gen_lowpart (qimode, v0),
gen_lowpart (qimode, v1), sel_qi);
if (tmp)
return gen_lowpart (mode, tmp);
}
}
}
/* Otherwise expand as a fully variable permuation. */
icode = direct_optab_handler (vec_perm_optab, mode);
if (icode != CODE_FOR_nothing)
{
tmp = expand_vec_perm_1 (icode, target, v0, v1, sel);
if (tmp)
return tmp;
}
/* As a special case to aid several targets, lower the element-based
permutation to a byte-based permutation and try again. */
if (qimode == VOIDmode)
return NULL_RTX;
icode = direct_optab_handler (vec_perm_optab, qimode);
if (icode == CODE_FOR_nothing)
return NULL_RTX;
if (sel_qi == NULL)
{
/* Multiply each element by its byte size. */
machine_mode selmode = GET_MODE (sel);
if (u == 2)
sel = expand_simple_binop (selmode, PLUS, sel, sel,
sel, 0, OPTAB_DIRECT);
else
sel = expand_simple_binop (selmode, ASHIFT, sel,
GEN_INT (exact_log2 (u)),
sel, 0, OPTAB_DIRECT);
gcc_assert (sel != NULL);
/* Broadcast the low byte each element into each of its bytes. */
vec = rtvec_alloc (w);
for (i = 0; i < w; ++i)
{
int this_e = i / u * u;
if (BYTES_BIG_ENDIAN)
this_e += u - 1;
RTVEC_ELT (vec, i) = GEN_INT (this_e);
}
tmp = gen_rtx_CONST_VECTOR (qimode, vec);
sel = gen_lowpart (qimode, sel);
sel = expand_vec_perm (qimode, sel, sel, tmp, NULL);
gcc_assert (sel != NULL);
/* Add the byte offset to each byte element. */
/* Note that the definition of the indicies here is memory ordering,
so there should be no difference between big and little endian. */
vec = rtvec_alloc (w);
for (i = 0; i < w; ++i)
RTVEC_ELT (vec, i) = GEN_INT (i % u);
tmp = gen_rtx_CONST_VECTOR (qimode, vec);
sel_qi = expand_simple_binop (qimode, PLUS, sel, tmp,
sel, 0, OPTAB_DIRECT);
gcc_assert (sel_qi != NULL);
}
tmp = mode != qimode ? gen_reg_rtx (qimode) : target;
tmp = expand_vec_perm_1 (icode, tmp, gen_lowpart (qimode, v0),
gen_lowpart (qimode, v1), sel_qi);
if (tmp)
tmp = gen_lowpart (mode, tmp);
return tmp;
}
/* Return insn code for a conditional operator with a comparison in
mode CMODE, unsigned if UNS is true, resulting in a value of mode VMODE. */
static inline enum insn_code
get_vcond_icode (machine_mode vmode, machine_mode cmode, bool uns)
{
enum insn_code icode = CODE_FOR_nothing;
if (uns)
icode = convert_optab_handler (vcondu_optab, vmode, cmode);
else
icode = convert_optab_handler (vcond_optab, vmode, cmode);
return icode;
}
/* Return TRUE iff, appropriate vector insns are available
for vector cond expr with vector type VALUE_TYPE and a comparison
with operand vector types in CMP_OP_TYPE. */
bool
expand_vec_cond_expr_p (tree value_type, tree cmp_op_type)
{
machine_mode value_mode = TYPE_MODE (value_type);
machine_mode cmp_op_mode = TYPE_MODE (cmp_op_type);
if (GET_MODE_SIZE (value_mode) != GET_MODE_SIZE (cmp_op_mode)
|| GET_MODE_NUNITS (value_mode) != GET_MODE_NUNITS (cmp_op_mode)
|| get_vcond_icode (TYPE_MODE (value_type), TYPE_MODE (cmp_op_type),
TYPE_UNSIGNED (cmp_op_type)) == CODE_FOR_nothing)
return false;
return true;
}
/* Generate insns for a VEC_COND_EXPR, given its TYPE and its
three operands. */
rtx
expand_vec_cond_expr (tree vec_cond_type, tree op0, tree op1, tree op2,
rtx target)
{
struct expand_operand ops[6];
enum insn_code icode;
rtx comparison, rtx_op1, rtx_op2;
machine_mode mode = TYPE_MODE (vec_cond_type);
machine_mode cmp_op_mode;
bool unsignedp;
tree op0a, op0b;
enum tree_code tcode;
if (COMPARISON_CLASS_P (op0))
{
op0a = TREE_OPERAND (op0, 0);
op0b = TREE_OPERAND (op0, 1);
tcode = TREE_CODE (op0);
}
else
{
/* Fake op0 < 0. */
gcc_assert (!TYPE_UNSIGNED (TREE_TYPE (op0)));
op0a = op0;
op0b = build_zero_cst (TREE_TYPE (op0));
tcode = LT_EXPR;
}
unsignedp = TYPE_UNSIGNED (TREE_TYPE (op0a));
cmp_op_mode = TYPE_MODE (TREE_TYPE (op0a));
gcc_assert (GET_MODE_SIZE (mode) == GET_MODE_SIZE (cmp_op_mode)
&& GET_MODE_NUNITS (mode) == GET_MODE_NUNITS (cmp_op_mode));
icode = get_vcond_icode (mode, cmp_op_mode, unsignedp);
if (icode == CODE_FOR_nothing)
return 0;
comparison = vector_compare_rtx (tcode, op0a, op0b, unsignedp, icode);
rtx_op1 = expand_normal (op1);
rtx_op2 = expand_normal (op2);
create_output_operand (&ops[0], target, mode);
create_input_operand (&ops[1], rtx_op1, mode);
create_input_operand (&ops[2], rtx_op2, mode);
create_fixed_operand (&ops[3], comparison);
create_fixed_operand (&ops[4], XEXP (comparison, 0));
create_fixed_operand (&ops[5], XEXP (comparison, 1));
expand_insn (icode, 6, ops);
return ops[0].value;
}
/* Return non-zero if a highpart multiply is supported of can be synthisized.
For the benefit of expand_mult_highpart, the return value is 1 for direct,
2 for even/odd widening, and 3 for hi/lo widening. */
int
can_mult_highpart_p (machine_mode mode, bool uns_p)
{
optab op;
unsigned char *sel;
unsigned i, nunits;
op = uns_p ? umul_highpart_optab : smul_highpart_optab;
if (optab_handler (op, mode) != CODE_FOR_nothing)
return 1;
/* If the mode is an integral vector, synth from widening operations. */
if (GET_MODE_CLASS (mode) != MODE_VECTOR_INT)
return 0;
nunits = GET_MODE_NUNITS (mode);
sel = XALLOCAVEC (unsigned char, nunits);
op = uns_p ? vec_widen_umult_even_optab : vec_widen_smult_even_optab;
if (optab_handler (op, mode) != CODE_FOR_nothing)
{
op = uns_p ? vec_widen_umult_odd_optab : vec_widen_smult_odd_optab;
if (optab_handler (op, mode) != CODE_FOR_nothing)
{
for (i = 0; i < nunits; ++i)
sel[i] = !BYTES_BIG_ENDIAN + (i & ~1) + ((i & 1) ? nunits : 0);
if (can_vec_perm_p (mode, false, sel))
return 2;
}
}
op = uns_p ? vec_widen_umult_hi_optab : vec_widen_smult_hi_optab;
if (optab_handler (op, mode) != CODE_FOR_nothing)
{
op = uns_p ? vec_widen_umult_lo_optab : vec_widen_smult_lo_optab;
if (optab_handler (op, mode) != CODE_FOR_nothing)
{
for (i = 0; i < nunits; ++i)
sel[i] = 2 * i + (BYTES_BIG_ENDIAN ? 0 : 1);
if (can_vec_perm_p (mode, false, sel))
return 3;
}
}
return 0;
}
/* Expand a highpart multiply. */
rtx
expand_mult_highpart (machine_mode mode, rtx op0, rtx op1,
rtx target, bool uns_p)
{
struct expand_operand eops[3];
enum insn_code icode;
int method, i, nunits;
machine_mode wmode;
rtx m1, m2, perm;
optab tab1, tab2;
rtvec v;
method = can_mult_highpart_p (mode, uns_p);
switch (method)
{
case 0:
return NULL_RTX;
case 1:
tab1 = uns_p ? umul_highpart_optab : smul_highpart_optab;
return expand_binop (mode, tab1, op0, op1, target, uns_p,
OPTAB_LIB_WIDEN);
case 2:
tab1 = uns_p ? vec_widen_umult_even_optab : vec_widen_smult_even_optab;
tab2 = uns_p ? vec_widen_umult_odd_optab : vec_widen_smult_odd_optab;
break;
case 3:
tab1 = uns_p ? vec_widen_umult_lo_optab : vec_widen_smult_lo_optab;
tab2 = uns_p ? vec_widen_umult_hi_optab : vec_widen_smult_hi_optab;
if (BYTES_BIG_ENDIAN)
{
optab t = tab1;
tab1 = tab2;
tab2 = t;
}
break;
default:
gcc_unreachable ();
}
icode = optab_handler (tab1, mode);
nunits = GET_MODE_NUNITS (mode);
wmode = insn_data[icode].operand[0].mode;
gcc_checking_assert (2 * GET_MODE_NUNITS (wmode) == nunits);
gcc_checking_assert (GET_MODE_SIZE (wmode) == GET_MODE_SIZE (mode));
create_output_operand (&eops[0], gen_reg_rtx (wmode), wmode);
create_input_operand (&eops[1], op0, mode);
create_input_operand (&eops[2], op1, mode);
expand_insn (icode, 3, eops);
m1 = gen_lowpart (mode, eops[0].value);
create_output_operand (&eops[0], gen_reg_rtx (wmode), wmode);
create_input_operand (&eops[1], op0, mode);
create_input_operand (&eops[2], op1, mode);
expand_insn (optab_handler (tab2, mode), 3, eops);
m2 = gen_lowpart (mode, eops[0].value);
v = rtvec_alloc (nunits);
if (method == 2)
{
for (i = 0; i < nunits; ++i)
RTVEC_ELT (v, i) = GEN_INT (!BYTES_BIG_ENDIAN + (i & ~1)
+ ((i & 1) ? nunits : 0));
}
else
{
for (i = 0; i < nunits; ++i)
RTVEC_ELT (v, i) = GEN_INT (2 * i + (BYTES_BIG_ENDIAN ? 0 : 1));
}
perm = gen_rtx_CONST_VECTOR (mode, v);
return expand_vec_perm (mode, m1, m2, perm, target);
}
/* Return true if target supports vector masked load/store for mode. */
bool
can_vec_mask_load_store_p (machine_mode mode, bool is_load)
{
optab op = is_load ? maskload_optab : maskstore_optab;
machine_mode vmode;
unsigned int vector_sizes;
/* If mode is vector mode, check it directly. */
if (VECTOR_MODE_P (mode))
return optab_handler (op, mode) != CODE_FOR_nothing;
/* Otherwise, return true if there is some vector mode with
the mask load/store supported. */
/* See if there is any chance the mask load or store might be
vectorized. If not, punt. */
vmode = targetm.vectorize.preferred_simd_mode (mode);
if (!VECTOR_MODE_P (vmode))
return false;
if (optab_handler (op, vmode) != CODE_FOR_nothing)
return true;
vector_sizes = targetm.vectorize.autovectorize_vector_sizes ();
while (vector_sizes != 0)
{
unsigned int cur = 1 << floor_log2 (vector_sizes);
vector_sizes &= ~cur;
if (cur <= GET_MODE_SIZE (mode))
continue;
vmode = mode_for_vector (mode, cur / GET_MODE_SIZE (mode));
if (VECTOR_MODE_P (vmode)
&& optab_handler (op, vmode) != CODE_FOR_nothing)
return true;
}
return false;
}
/* Return true if there is a compare_and_swap pattern. */
bool
can_compare_and_swap_p (machine_mode mode, bool allow_libcall)
{
enum insn_code icode;
/* Check for __atomic_compare_and_swap. */
icode = direct_optab_handler (atomic_compare_and_swap_optab, mode);
if (icode != CODE_FOR_nothing)
return true;
/* Check for __sync_compare_and_swap. */
icode = optab_handler (sync_compare_and_swap_optab, mode);
if (icode != CODE_FOR_nothing)
return true;
if (allow_libcall && optab_libfunc (sync_compare_and_swap_optab, mode))
return true;
/* No inline compare and swap. */
return false;
}
/* Return true if an atomic exchange can be performed. */
bool
can_atomic_exchange_p (machine_mode mode, bool allow_libcall)
{
enum insn_code icode;
/* Check for __atomic_exchange. */
icode = direct_optab_handler (atomic_exchange_optab, mode);
if (icode != CODE_FOR_nothing)
return true;
/* Don't check __sync_test_and_set, as on some platforms that
has reduced functionality. Targets that really do support
a proper exchange should simply be updated to the __atomics. */
return can_compare_and_swap_p (mode, allow_libcall);
}
/* Helper function to find the MODE_CC set in a sync_compare_and_swap
pattern. */
static void
find_cc_set (rtx x, const_rtx pat, void *data)
{
if (REG_P (x) && GET_MODE_CLASS (GET_MODE (x)) == MODE_CC
&& GET_CODE (pat) == SET)
{
rtx *p_cc_reg = (rtx *) data;
gcc_assert (!*p_cc_reg);
*p_cc_reg = x;
}
}
/* This is a helper function for the other atomic operations. This function
emits a loop that contains SEQ that iterates until a compare-and-swap
operation at the end succeeds. MEM is the memory to be modified. SEQ is
a set of instructions that takes a value from OLD_REG as an input and
produces a value in NEW_REG as an output. Before SEQ, OLD_REG will be
set to the current contents of MEM. After SEQ, a compare-and-swap will
attempt to update MEM with NEW_REG. The function returns true when the
loop was generated successfully. */
static bool
expand_compare_and_swap_loop (rtx mem, rtx old_reg, rtx new_reg, rtx seq)
{
machine_mode mode = GET_MODE (mem);
rtx_code_label *label;
rtx cmp_reg, success, oldval;
/* The loop we want to generate looks like
cmp_reg = mem;
label:
old_reg = cmp_reg;
seq;
(success, cmp_reg) = compare-and-swap(mem, old_reg, new_reg)
if (success)
goto label;
Note that we only do the plain load from memory once. Subsequent
iterations use the value loaded by the compare-and-swap pattern. */
label = gen_label_rtx ();
cmp_reg = gen_reg_rtx (mode);
emit_move_insn (cmp_reg, mem);
emit_label (label);
emit_move_insn (old_reg, cmp_reg);
if (seq)
emit_insn (seq);
success = NULL_RTX;
oldval = cmp_reg;
if (!expand_atomic_compare_and_swap (&success, &oldval, mem, old_reg,
new_reg, false, MEMMODEL_SEQ_CST,
MEMMODEL_RELAXED))
return false;
if (oldval != cmp_reg)
emit_move_insn (cmp_reg, oldval);
/* Mark this jump predicted not taken. */
emit_cmp_and_jump_insns (success, const0_rtx, EQ, const0_rtx,
GET_MODE (success), 1, label, 0);
return true;
}
/* This function tries to emit an atomic_exchange intruction. VAL is written
to *MEM using memory model MODEL. The previous contents of *MEM are returned,
using TARGET if possible. */
static rtx
maybe_emit_atomic_exchange (rtx target, rtx mem, rtx val, enum memmodel model)
{
machine_mode mode = GET_MODE (mem);
enum insn_code icode;
/* If the target supports the exchange directly, great. */
icode = direct_optab_handler (atomic_exchange_optab, mode);
if (icode != CODE_FOR_nothing)
{
struct expand_operand ops[4];
create_output_operand (&ops[0], target, mode);
create_fixed_operand (&ops[1], mem);
create_input_operand (&ops[2], val, mode);
create_integer_operand (&ops[3], model);
if (maybe_expand_insn (icode, 4, ops))
return ops[0].value;
}
return NULL_RTX;
}
/* This function tries to implement an atomic exchange operation using
__sync_lock_test_and_set. VAL is written to *MEM using memory model MODEL.
The previous contents of *MEM are returned, using TARGET if possible.
Since this instructionn is an acquire barrier only, stronger memory
models may require additional barriers to be emitted. */
static rtx
maybe_emit_sync_lock_test_and_set (rtx target, rtx mem, rtx val,
enum memmodel model)
{
machine_mode mode = GET_MODE (mem);
enum insn_code icode;
rtx_insn *last_insn = get_last_insn ();
icode = optab_handler (sync_lock_test_and_set_optab, mode);
/* Legacy sync_lock_test_and_set is an acquire barrier. If the pattern
exists, and the memory model is stronger than acquire, add a release
barrier before the instruction. */
if ((model & MEMMODEL_MASK) == MEMMODEL_SEQ_CST
|| (model & MEMMODEL_MASK) == MEMMODEL_RELEASE
|| (model & MEMMODEL_MASK) == MEMMODEL_ACQ_REL)
expand_mem_thread_fence (model);
if (icode != CODE_FOR_nothing)
{
struct expand_operand ops[3];
create_output_operand (&ops[0], target, mode);
create_fixed_operand (&ops[1], mem);
create_input_operand (&ops[2], val, mode);
if (maybe_expand_insn (icode, 3, ops))
return ops[0].value;
}
/* If an external test-and-set libcall is provided, use that instead of
any external compare-and-swap that we might get from the compare-and-
swap-loop expansion later. */
if (!can_compare_and_swap_p (mode, false))
{
rtx libfunc = optab_libfunc (sync_lock_test_and_set_optab, mode);
if (libfunc != NULL)
{
rtx addr;
addr = convert_memory_address (ptr_mode, XEXP (mem, 0));
return emit_library_call_value (libfunc, NULL_RTX, LCT_NORMAL,
mode, 2, addr, ptr_mode,
val, mode);
}
}
/* If the test_and_set can't be emitted, eliminate any barrier that might
have been emitted. */
delete_insns_since (last_insn);
return NULL_RTX;
}
/* This function tries to implement an atomic exchange operation using a
compare_and_swap loop. VAL is written to *MEM. The previous contents of
*MEM are returned, using TARGET if possible. No memory model is required
since a compare_and_swap loop is seq-cst. */
static rtx
maybe_emit_compare_and_swap_exchange_loop (rtx target, rtx mem, rtx val)
{
machine_mode mode = GET_MODE (mem);
if (can_compare_and_swap_p (mode, true))
{
if (!target || !register_operand (target, mode))
target = gen_reg_rtx (mode);
if (expand_compare_and_swap_loop (mem, target, val, NULL_RTX))
return target;
}
return NULL_RTX;
}
/* This function tries to implement an atomic test-and-set operation
using the atomic_test_and_set instruction pattern. A boolean value
is returned from the operation, using TARGET if possible. */
#ifndef HAVE_atomic_test_and_set
#define HAVE_atomic_test_and_set 0
#define CODE_FOR_atomic_test_and_set CODE_FOR_nothing
#endif
static rtx
maybe_emit_atomic_test_and_set (rtx target, rtx mem, enum memmodel model)
{
machine_mode pat_bool_mode;
struct expand_operand ops[3];
if (!HAVE_atomic_test_and_set)
return NULL_RTX;
/* While we always get QImode from __atomic_test_and_set, we get
other memory modes from __sync_lock_test_and_set. Note that we
use no endian adjustment here. This matches the 4.6 behavior
in the Sparc backend. */
gcc_checking_assert
(insn_data[CODE_FOR_atomic_test_and_set].operand[1].mode == QImode);
if (GET_MODE (mem) != QImode)
mem = adjust_address_nv (mem, QImode, 0);
pat_bool_mode = insn_data[CODE_FOR_atomic_test_and_set].operand[0].mode;
create_output_operand (&ops[0], target, pat_bool_mode);
create_fixed_operand (&ops[1], mem);
create_integer_operand (&ops[2], model);
if (maybe_expand_insn (CODE_FOR_atomic_test_and_set, 3, ops))
return ops[0].value;
return NULL_RTX;
}
/* This function expands the legacy _sync_lock test_and_set operation which is
generally an atomic exchange. Some limited targets only allow the
constant 1 to be stored. This is an ACQUIRE operation.
TARGET is an optional place to stick the return value.
MEM is where VAL is stored. */
rtx
expand_sync_lock_test_and_set (rtx target, rtx mem, rtx val)
{
rtx ret;
/* Try an atomic_exchange first. */
ret = maybe_emit_atomic_exchange (target, mem, val, MEMMODEL_ACQUIRE);
if (ret)
return ret;
ret = maybe_emit_sync_lock_test_and_set (target, mem, val, MEMMODEL_ACQUIRE);
if (ret)
return ret;
ret = maybe_emit_compare_and_swap_exchange_loop (target, mem, val);
if (ret)
return ret;
/* If there are no other options, try atomic_test_and_set if the value
being stored is 1. */
if (val == const1_rtx)
ret = maybe_emit_atomic_test_and_set (target, mem, MEMMODEL_ACQUIRE);
return ret;
}
/* This function expands the atomic test_and_set operation:
atomically store a boolean TRUE into MEM and return the previous value.
MEMMODEL is the memory model variant to use.
TARGET is an optional place to stick the return value. */
rtx
expand_atomic_test_and_set (rtx target, rtx mem, enum memmodel model)
{
machine_mode mode = GET_MODE (mem);
rtx ret, trueval, subtarget;
ret = maybe_emit_atomic_test_and_set (target, mem, model);
if (ret)
return ret;
/* Be binary compatible with non-default settings of trueval, and different
cpu revisions. E.g. one revision may have atomic-test-and-set, but
another only has atomic-exchange. */
if (targetm.atomic_test_and_set_trueval == 1)
{
trueval = const1_rtx;
subtarget = target ? target : gen_reg_rtx (mode);
}
else
{
trueval = gen_int_mode (targetm.atomic_test_and_set_trueval, mode);
subtarget = gen_reg_rtx (mode);
}
/* Try the atomic-exchange optab... */
ret = maybe_emit_atomic_exchange (subtarget, mem, trueval, model);
/* ... then an atomic-compare-and-swap loop ... */
if (!ret)
ret = maybe_emit_compare_and_swap_exchange_loop (subtarget, mem, trueval);
/* ... before trying the vaguely defined legacy lock_test_and_set. */
if (!ret)
ret = maybe_emit_sync_lock_test_and_set (subtarget, mem, trueval, model);
/* Recall that the legacy lock_test_and_set optab was allowed to do magic
things with the value 1. Thus we try again without trueval. */
if (!ret && targetm.atomic_test_and_set_trueval != 1)
ret = maybe_emit_sync_lock_test_and_set (subtarget, mem, const1_rtx, model);
/* Failing all else, assume a single threaded environment and simply
perform the operation. */
if (!ret)
{
/* If the result is ignored skip the move to target. */
if (subtarget != const0_rtx)
emit_move_insn (subtarget, mem);
emit_move_insn (mem, trueval);
ret = subtarget;
}
/* Recall that have to return a boolean value; rectify if trueval
is not exactly one. */
if (targetm.atomic_test_and_set_trueval != 1)
ret = emit_store_flag_force (target, NE, ret, const0_rtx, mode, 0, 1);
return ret;
}
/* This function expands the atomic exchange operation:
atomically store VAL in MEM and return the previous value in MEM.
MEMMODEL is the memory model variant to use.
TARGET is an optional place to stick the return value. */
rtx
expand_atomic_exchange (rtx target, rtx mem, rtx val, enum memmodel model)
{
rtx ret;
ret = maybe_emit_atomic_exchange (target, mem, val, model);
/* Next try a compare-and-swap loop for the exchange. */
if (!ret)
ret = maybe_emit_compare_and_swap_exchange_loop (target, mem, val);
return ret;
}
/* This function expands the atomic compare exchange operation:
*PTARGET_BOOL is an optional place to store the boolean success/failure.
*PTARGET_OVAL is an optional place to store the old value from memory.
Both target parameters may be NULL to indicate that we do not care about
that return value. Both target parameters are updated on success to
the actual location of the corresponding result.
MEMMODEL is the memory model variant to use.
The return value of the function is true for success. */
bool
expand_atomic_compare_and_swap (rtx *ptarget_bool, rtx *ptarget_oval,
rtx mem, rtx expected, rtx desired,
bool is_weak, enum memmodel succ_model,
enum memmodel fail_model)
{
machine_mode mode = GET_MODE (mem);
struct expand_operand ops[8];
enum insn_code icode;
rtx target_oval, target_bool = NULL_RTX;
rtx libfunc;
/* Load expected into a register for the compare and swap. */
if (MEM_P (expected))
expected = copy_to_reg (expected);
/* Make sure we always have some place to put the return oldval.
Further, make sure that place is distinct from the input expected,
just in case we need that path down below. */
if (ptarget_oval == NULL
|| (target_oval = *ptarget_oval) == NULL
|| reg_overlap_mentioned_p (expected, target_oval))
target_oval = gen_reg_rtx (mode);
icode = direct_optab_handler (atomic_compare_and_swap_optab, mode);
if (icode != CODE_FOR_nothing)
{
machine_mode bool_mode = insn_data[icode].operand[0].mode;
/* Make sure we always have a place for the bool operand. */
if (ptarget_bool == NULL
|| (target_bool = *ptarget_bool) == NULL
|| GET_MODE (target_bool) != bool_mode)
target_bool = gen_reg_rtx (bool_mode);
/* Emit the compare_and_swap. */
create_output_operand (&ops[0], target_bool, bool_mode);
create_output_operand (&ops[1], target_oval, mode);
create_fixed_operand (&ops[2], mem);
create_input_operand (&ops[3], expected, mode);
create_input_operand (&ops[4], desired, mode);
create_integer_operand (&ops[5], is_weak);
create_integer_operand (&ops[6], succ_model);
create_integer_operand (&ops[7], fail_model);
if (maybe_expand_insn (icode, 8, ops))
{
/* Return success/failure. */
target_bool = ops[0].value;
target_oval = ops[1].value;
goto success;
}
}
/* Otherwise fall back to the original __sync_val_compare_and_swap
which is always seq-cst. */
icode = optab_handler (sync_compare_and_swap_optab, mode);
if (icode != CODE_FOR_nothing)
{
rtx cc_reg;
create_output_operand (&ops[0], target_oval, mode);
create_fixed_operand (&ops[1], mem);
create_input_operand (&ops[2], expected, mode);
create_input_operand (&ops[3], desired, mode);
if (!maybe_expand_insn (icode, 4, ops))
return false;
target_oval = ops[0].value;
/* If the caller isn't interested in the boolean return value,
skip the computation of it. */
if (ptarget_bool == NULL)
goto success;
/* Otherwise, work out if the compare-and-swap succeeded. */
cc_reg = NULL_RTX;
if (have_insn_for (COMPARE, CCmode))
note_stores (PATTERN (get_last_insn ()), find_cc_set, &cc_reg);
if (cc_reg)
{
target_bool = emit_store_flag_force (target_bool, EQ, cc_reg,
const0_rtx, VOIDmode, 0, 1);
goto success;
}
goto success_bool_from_val;
}
/* Also check for library support for __sync_val_compare_and_swap. */
libfunc = optab_libfunc (sync_compare_and_swap_optab, mode);
if (libfunc != NULL)
{
rtx addr = convert_memory_address (ptr_mode, XEXP (mem, 0));
target_oval = emit_library_call_value (libfunc, NULL_RTX, LCT_NORMAL,
mode, 3, addr, ptr_mode,
expected, mode, desired, mode);
/* Compute the boolean return value only if requested. */
if (ptarget_bool)
goto success_bool_from_val;
else
goto success;
}
/* Failure. */
return false;
success_bool_from_val:
target_bool = emit_store_flag_force (target_bool, EQ, target_oval,
expected, VOIDmode, 1, 1);
success:
/* Make sure that the oval output winds up where the caller asked. */
if (ptarget_oval)
*ptarget_oval = target_oval;
if (ptarget_bool)
*ptarget_bool = target_bool;
return true;
}
/* Generate asm volatile("" : : : "memory") as the memory barrier. */
static void
expand_asm_memory_barrier (void)
{
rtx asm_op, clob;
asm_op = gen_rtx_ASM_OPERANDS (VOIDmode, empty_string, empty_string, 0,
rtvec_alloc (0), rtvec_alloc (0),
rtvec_alloc (0), UNKNOWN_LOCATION);
MEM_VOLATILE_P (asm_op) = 1;
clob = gen_rtx_SCRATCH (VOIDmode);
clob = gen_rtx_MEM (BLKmode, clob);
clob = gen_rtx_CLOBBER (VOIDmode, clob);
emit_insn (gen_rtx_PARALLEL (VOIDmode, gen_rtvec (2, asm_op, clob)));
}
/* This routine will either emit the mem_thread_fence pattern or issue a
sync_synchronize to generate a fence for memory model MEMMODEL. */
#ifndef HAVE_mem_thread_fence
# define HAVE_mem_thread_fence 0
# define gen_mem_thread_fence(x) (gcc_unreachable (), NULL_RTX)
#endif
#ifndef HAVE_memory_barrier
# define HAVE_memory_barrier 0
# define gen_memory_barrier() (gcc_unreachable (), NULL_RTX)
#endif
void
expand_mem_thread_fence (enum memmodel model)
{
if (HAVE_mem_thread_fence)
emit_insn (gen_mem_thread_fence (GEN_INT (model)));
else if ((model & MEMMODEL_MASK) != MEMMODEL_RELAXED)
{
if (HAVE_memory_barrier)
emit_insn (gen_memory_barrier ());
else if (synchronize_libfunc != NULL_RTX)
emit_library_call (synchronize_libfunc, LCT_NORMAL, VOIDmode, 0);
else
expand_asm_memory_barrier ();
}
}
/* This routine will either emit the mem_signal_fence pattern or issue a
sync_synchronize to generate a fence for memory model MEMMODEL. */
#ifndef HAVE_mem_signal_fence
# define HAVE_mem_signal_fence 0
# define gen_mem_signal_fence(x) (gcc_unreachable (), NULL_RTX)
#endif
void
expand_mem_signal_fence (enum memmodel model)
{
if (HAVE_mem_signal_fence)
emit_insn (gen_mem_signal_fence (GEN_INT (model)));
else if ((model & MEMMODEL_MASK) != MEMMODEL_RELAXED)
{
/* By default targets are coherent between a thread and the signal
handler running on the same thread. Thus this really becomes a
compiler barrier, in that stores must not be sunk past
(or raised above) a given point. */
expand_asm_memory_barrier ();
}
}
/* This function expands the atomic load operation:
return the atomically loaded value in MEM.
MEMMODEL is the memory model variant to use.
TARGET is an option place to stick the return value. */
rtx
expand_atomic_load (rtx target, rtx mem, enum memmodel model)
{
machine_mode mode = GET_MODE (mem);
enum insn_code icode;
/* If the target supports the load directly, great. */
icode = direct_optab_handler (atomic_load_optab, mode);
if (icode != CODE_FOR_nothing)
{
struct expand_operand ops[3];
create_output_operand (&ops[0], target, mode);
create_fixed_operand (&ops[1], mem);
create_integer_operand (&ops[2], model);
if (maybe_expand_insn (icode, 3, ops))
return ops[0].value;
}
/* If the size of the object is greater than word size on this target,
then we assume that a load will not be atomic. */
if (GET_MODE_PRECISION (mode) > BITS_PER_WORD)
{
/* Issue val = compare_and_swap (mem, 0, 0).
This may cause the occasional harmless store of 0 when the value is
already 0, but it seems to be OK according to the standards guys. */
if (expand_atomic_compare_and_swap (NULL, &target, mem, const0_rtx,
const0_rtx, false, model, model))
return target;
else
/* Otherwise there is no atomic load, leave the library call. */
return NULL_RTX;
}
/* Otherwise assume loads are atomic, and emit the proper barriers. */
if (!target || target == const0_rtx)
target = gen_reg_rtx (mode);
/* For SEQ_CST, emit a barrier before the load. */
if ((model & MEMMODEL_MASK) == MEMMODEL_SEQ_CST)
expand_mem_thread_fence (model);
emit_move_insn (target, mem);
/* Emit the appropriate barrier after the load. */
expand_mem_thread_fence (model);
return target;
}
/* This function expands the atomic store operation:
Atomically store VAL in MEM.
MEMMODEL is the memory model variant to use.
USE_RELEASE is true if __sync_lock_release can be used as a fall back.
function returns const0_rtx if a pattern was emitted. */
rtx
expand_atomic_store (rtx mem, rtx val, enum memmodel model, bool use_release)
{
machine_mode mode = GET_MODE (mem);
enum insn_code icode;
struct expand_operand ops[3];
/* If the target supports the store directly, great. */
icode = direct_optab_handler (atomic_store_optab, mode);
if (icode != CODE_FOR_nothing)
{
create_fixed_operand (&ops[0], mem);
create_input_operand (&ops[1], val, mode);
create_integer_operand (&ops[2], model);
if (maybe_expand_insn (icode, 3, ops))
return const0_rtx;
}
/* If using __sync_lock_release is a viable alternative, try it. */
if (use_release)
{
icode = direct_optab_handler (sync_lock_release_optab, mode);
if (icode != CODE_FOR_nothing)
{
create_fixed_operand (&ops[0], mem);
create_input_operand (&ops[1], const0_rtx, mode);
if (maybe_expand_insn (icode, 2, ops))
{
/* lock_release is only a release barrier. */
if ((model & MEMMODEL_MASK) == MEMMODEL_SEQ_CST)
expand_mem_thread_fence (model);
return const0_rtx;
}
}
}
/* If the size of the object is greater than word size on this target,
a default store will not be atomic, Try a mem_exchange and throw away
the result. If that doesn't work, don't do anything. */
if (GET_MODE_PRECISION (mode) > BITS_PER_WORD)
{
rtx target = maybe_emit_atomic_exchange (NULL_RTX, mem, val, model);
if (!target)
target = maybe_emit_compare_and_swap_exchange_loop (NULL_RTX, mem, val);
if (target)
return const0_rtx;
else
return NULL_RTX;
}
/* Otherwise assume stores are atomic, and emit the proper barriers. */
expand_mem_thread_fence (model);
emit_move_insn (mem, val);
/* For SEQ_CST, also emit a barrier after the store. */
if ((model & MEMMODEL_MASK) == MEMMODEL_SEQ_CST)
expand_mem_thread_fence (model);
return const0_rtx;
}
/* Structure containing the pointers and values required to process the
various forms of the atomic_fetch_op and atomic_op_fetch builtins. */
struct atomic_op_functions
{
direct_optab mem_fetch_before;
direct_optab mem_fetch_after;
direct_optab mem_no_result;
optab fetch_before;
optab fetch_after;
direct_optab no_result;
enum rtx_code reverse_code;
};
/* Fill in structure pointed to by OP with the various optab entries for an
operation of type CODE. */
static void
get_atomic_op_for_code (struct atomic_op_functions *op, enum rtx_code code)
{
gcc_assert (op!= NULL);
/* If SWITCHABLE_TARGET is defined, then subtargets can be switched
in the source code during compilation, and the optab entries are not
computable until runtime. Fill in the values at runtime. */
switch (code)
{
case PLUS:
op->mem_fetch_before = atomic_fetch_add_optab;
op->mem_fetch_after = atomic_add_fetch_optab;
op->mem_no_result = atomic_add_optab;
op->fetch_before = sync_old_add_optab;
op->fetch_after = sync_new_add_optab;
op->no_result = sync_add_optab;
op->reverse_code = MINUS;
break;
case MINUS:
op->mem_fetch_before = atomic_fetch_sub_optab;
op->mem_fetch_after = atomic_sub_fetch_optab;
op->mem_no_result = atomic_sub_optab;
op->fetch_before = sync_old_sub_optab;
op->fetch_after = sync_new_sub_optab;
op->no_result = sync_sub_optab;
op->reverse_code = PLUS;
break;
case XOR:
op->mem_fetch_before = atomic_fetch_xor_optab;
op->mem_fetch_after = atomic_xor_fetch_optab;
op->mem_no_result = atomic_xor_optab;
op->fetch_before = sync_old_xor_optab;
op->fetch_after = sync_new_xor_optab;
op->no_result = sync_xor_optab;
op->reverse_code = XOR;
break;
case AND:
op->mem_fetch_before = atomic_fetch_and_optab;
op->mem_fetch_after = atomic_and_fetch_optab;
op->mem_no_result = atomic_and_optab;
op->fetch_before = sync_old_and_optab;
op->fetch_after = sync_new_and_optab;
op->no_result = sync_and_optab;
op->reverse_code = UNKNOWN;
break;
case IOR:
op->mem_fetch_before = atomic_fetch_or_optab;
op->mem_fetch_after = atomic_or_fetch_optab;
op->mem_no_result = atomic_or_optab;
op->fetch_before = sync_old_ior_optab;
op->fetch_after = sync_new_ior_optab;
op->no_result = sync_ior_optab;
op->reverse_code = UNKNOWN;
break;
case NOT:
op->mem_fetch_before = atomic_fetch_nand_optab;
op->mem_fetch_after = atomic_nand_fetch_optab;
op->mem_no_result = atomic_nand_optab;
op->fetch_before = sync_old_nand_optab;
op->fetch_after = sync_new_nand_optab;
op->no_result = sync_nand_optab;
op->reverse_code = UNKNOWN;
break;
default:
gcc_unreachable ();
}
}
/* See if there is a more optimal way to implement the operation "*MEM CODE VAL"
using memory order MODEL. If AFTER is true the operation needs to return
the value of *MEM after the operation, otherwise the previous value.
TARGET is an optional place to place the result. The result is unused if
it is const0_rtx.
Return the result if there is a better sequence, otherwise NULL_RTX. */
static rtx
maybe_optimize_fetch_op (rtx target, rtx mem, rtx val, enum rtx_code code,
enum memmodel model, bool after)
{
/* If the value is prefetched, or not used, it may be possible to replace
the sequence with a native exchange operation. */
if (!after || target == const0_rtx)
{
/* fetch_and (&x, 0, m) can be replaced with exchange (&x, 0, m). */
if (code == AND && val == const0_rtx)
{
if (target == const0_rtx)
target = gen_reg_rtx (GET_MODE (mem));
return maybe_emit_atomic_exchange (target, mem, val, model);
}
/* fetch_or (&x, -1, m) can be replaced with exchange (&x, -1, m). */
if (code == IOR && val == constm1_rtx)
{
if (target == const0_rtx)
target = gen_reg_rtx (GET_MODE (mem));
return maybe_emit_atomic_exchange (target, mem, val, model);
}
}
return NULL_RTX;
}
/* Try to emit an instruction for a specific operation varaition.
OPTAB contains the OP functions.
TARGET is an optional place to return the result. const0_rtx means unused.
MEM is the memory location to operate on.
VAL is the value to use in the operation.
USE_MEMMODEL is TRUE if the variation with a memory model should be tried.
MODEL is the memory model, if used.
AFTER is true if the returned result is the value after the operation. */
static rtx
maybe_emit_op (const struct atomic_op_functions *optab, rtx target, rtx mem,
rtx val, bool use_memmodel, enum memmodel model, bool after)
{
machine_mode mode = GET_MODE (mem);
struct expand_operand ops[4];
enum insn_code icode;
int op_counter = 0;
int num_ops;
/* Check to see if there is a result returned. */
if (target == const0_rtx)
{
if (use_memmodel)
{
icode = direct_optab_handler (optab->mem_no_result, mode);
create_integer_operand (&ops[2], model);
num_ops = 3;
}
else
{
icode = direct_optab_handler (optab->no_result, mode);
num_ops = 2;
}
}
/* Otherwise, we need to generate a result. */
else
{
if (use_memmodel)
{
icode = direct_optab_handler (after ? optab->mem_fetch_after
: optab->mem_fetch_before, mode);
create_integer_operand (&ops[3], model);
num_ops = 4;
}
else
{
icode = optab_handler (after ? optab->fetch_after
: optab->fetch_before, mode);
num_ops = 3;
}
create_output_operand (&ops[op_counter++], target, mode);
}
if (icode == CODE_FOR_nothing)
return NULL_RTX;
create_fixed_operand (&ops[op_counter++], mem);
/* VAL may have been promoted to a wider mode. Shrink it if so. */
create_convert_operand_to (&ops[op_counter++], val, mode, true);
if (maybe_expand_insn (icode, num_ops, ops))
return (target == const0_rtx ? const0_rtx : ops[0].value);
return NULL_RTX;
}
/* This function expands an atomic fetch_OP or OP_fetch operation:
TARGET is an option place to stick the return value. const0_rtx indicates
the result is unused.
atomically fetch MEM, perform the operation with VAL and return it to MEM.
CODE is the operation being performed (OP)
MEMMODEL is the memory model variant to use.
AFTER is true to return the result of the operation (OP_fetch).
AFTER is false to return the value before the operation (fetch_OP).
This function will *only* generate instructions if there is a direct
optab. No compare and swap loops or libcalls will be generated. */
static rtx
expand_atomic_fetch_op_no_fallback (rtx target, rtx mem, rtx val,
enum rtx_code code, enum memmodel model,
bool after)
{
machine_mode mode = GET_MODE (mem);
struct atomic_op_functions optab;
rtx result;
bool unused_result = (target == const0_rtx);
get_atomic_op_for_code (&optab, code);
/* Check to see if there are any better instructions. */
result = maybe_optimize_fetch_op (target, mem, val, code, model, after);
if (result)
return result;
/* Check for the case where the result isn't used and try those patterns. */
if (unused_result)
{
/* Try the memory model variant first. */
result = maybe_emit_op (&optab, target, mem, val, true, model, true);
if (result)
return result;
/* Next try the old style withuot a memory model. */
result = maybe_emit_op (&optab, target, mem, val, false, model, true);
if (result)
return result;
/* There is no no-result pattern, so try patterns with a result. */
target = NULL_RTX;
}
/* Try the __atomic version. */
result = maybe_emit_op (&optab, target, mem, val, true, model, after);
if (result)
return result;
/* Try the older __sync version. */
result = maybe_emit_op (&optab, target, mem, val, false, model, after);
if (result)
return result;
/* If the fetch value can be calculated from the other variation of fetch,
try that operation. */
if (after || unused_result || optab.reverse_code != UNKNOWN)
{
/* Try the __atomic version, then the older __sync version. */
result = maybe_emit_op (&optab, target, mem, val, true, model, !after);
if (!result)
result = maybe_emit_op (&optab, target, mem, val, false, model, !after);
if (result)
{
/* If the result isn't used, no need to do compensation code. */
if (unused_result)
return result;
/* Issue compensation code. Fetch_after == fetch_before OP val.
Fetch_before == after REVERSE_OP val. */
if (!after)
code = optab.reverse_code;
if (code == NOT)
{
result = expand_simple_binop (mode, AND, result, val, NULL_RTX,
true, OPTAB_LIB_WIDEN);
result = expand_simple_unop (mode, NOT, result, target, true);
}
else
result = expand_simple_binop (mode, code, result, val, target,
true, OPTAB_LIB_WIDEN);
return result;
}
}
/* No direct opcode can be generated. */
return NULL_RTX;
}
/* This function expands an atomic fetch_OP or OP_fetch operation:
TARGET is an option place to stick the return value. const0_rtx indicates
the result is unused.
atomically fetch MEM, perform the operation with VAL and return it to MEM.
CODE is the operation being performed (OP)
MEMMODEL is the memory model variant to use.
AFTER is true to return the result of the operation (OP_fetch).
AFTER is false to return the value before the operation (fetch_OP). */
rtx
expand_atomic_fetch_op (rtx target, rtx mem, rtx val, enum rtx_code code,
enum memmodel model, bool after)
{
machine_mode mode = GET_MODE (mem);
rtx result;
bool unused_result = (target == const0_rtx);
result = expand_atomic_fetch_op_no_fallback (target, mem, val, code, model,
after);
if (result)
return result;
/* Add/sub can be implemented by doing the reverse operation with -(val). */
if (code == PLUS || code == MINUS)
{
rtx tmp;
enum rtx_code reverse = (code == PLUS ? MINUS : PLUS);
start_sequence ();
tmp = expand_simple_unop (mode, NEG, val, NULL_RTX, true);
result = expand_atomic_fetch_op_no_fallback (target, mem, tmp, reverse,
model, after);
if (result)
{
/* PLUS worked so emit the insns and return. */
tmp = get_insns ();
end_sequence ();
emit_insn (tmp);
return result;
}
/* PLUS did not work, so throw away the negation code and continue. */
end_sequence ();
}
/* Try the __sync libcalls only if we can't do compare-and-swap inline. */
if (!can_compare_and_swap_p (mode, false))
{
rtx libfunc;
bool fixup = false;
enum rtx_code orig_code = code;
struct atomic_op_functions optab;
get_atomic_op_for_code (&optab, code);
libfunc = optab_libfunc (after ? optab.fetch_after
: optab.fetch_before, mode);
if (libfunc == NULL
&& (after || unused_result || optab.reverse_code != UNKNOWN))
{
fixup = true;
if (!after)
code = optab.reverse_code;
libfunc = optab_libfunc (after ? optab.fetch_before
: optab.fetch_after, mode);
}
if (libfunc != NULL)
{
rtx addr = convert_memory_address (ptr_mode, XEXP (mem, 0));
result = emit_library_call_value (libfunc, NULL, LCT_NORMAL, mode,
2, addr, ptr_mode, val, mode);
if (!unused_result && fixup)
result = expand_simple_binop (mode, code, result, val, target,
true, OPTAB_LIB_WIDEN);
return result;
}
/* We need the original code for any further attempts. */
code = orig_code;
}
/* If nothing else has succeeded, default to a compare and swap loop. */
if (can_compare_and_swap_p (mode, true))
{
rtx_insn *insn;
rtx t0 = gen_reg_rtx (mode), t1;
start_sequence ();
/* If the result is used, get a register for it. */
if (!unused_result)
{
if (!target || !register_operand (target, mode))
target = gen_reg_rtx (mode);
/* If fetch_before, copy the value now. */
if (!after)
emit_move_insn (target, t0);
}
else
target = const0_rtx;
t1 = t0;
if (code == NOT)
{
t1 = expand_simple_binop (mode, AND, t1, val, NULL_RTX,
true, OPTAB_LIB_WIDEN);
t1 = expand_simple_unop (mode, code, t1, NULL_RTX, true);
}
else
t1 = expand_simple_binop (mode, code, t1, val, NULL_RTX, true,
OPTAB_LIB_WIDEN);
/* For after, copy the value now. */
if (!unused_result && after)
emit_move_insn (target, t1);
insn = get_insns ();
end_sequence ();
if (t1 != NULL && expand_compare_and_swap_loop (mem, t0, t1, insn))
return target;
}
return NULL_RTX;
}
/* Return true if OPERAND is suitable for operand number OPNO of
instruction ICODE. */
bool
insn_operand_matches (enum insn_code icode, unsigned int opno, rtx operand)
{
return (!insn_data[(int) icode].operand[opno].predicate
|| (insn_data[(int) icode].operand[opno].predicate
(operand, insn_data[(int) icode].operand[opno].mode)));
}
/* TARGET is a target of a multiword operation that we are going to
implement as a series of word-mode operations. Return true if
TARGET is suitable for this purpose. */
bool
valid_multiword_target_p (rtx target)
{
machine_mode mode;
int i;
mode = GET_MODE (target);
for (i = 0; i < GET_MODE_SIZE (mode); i += UNITS_PER_WORD)
if (!validate_subreg (word_mode, mode, target, i))
return false;
return true;
}
/* Like maybe_legitimize_operand, but do not change the code of the
current rtx value. */
static bool
maybe_legitimize_operand_same_code (enum insn_code icode, unsigned int opno,
struct expand_operand *op)
{
/* See if the operand matches in its current form. */
if (insn_operand_matches (icode, opno, op->value))
return true;
/* If the operand is a memory whose address has no side effects,
try forcing the address into a non-virtual pseudo register.
The check for side effects is important because copy_to_mode_reg
cannot handle things like auto-modified addresses. */
if (insn_data[(int) icode].operand[opno].allows_mem && MEM_P (op->value))
{
rtx addr, mem;
mem = op->value;
addr = XEXP (mem, 0);
if (!(REG_P (addr) && REGNO (addr) > LAST_VIRTUAL_REGISTER)
&& !side_effects_p (addr))
{
rtx_insn *last;
machine_mode mode;
last = get_last_insn ();
mode = get_address_mode (mem);
mem = replace_equiv_address (mem, copy_to_mode_reg (mode, addr));
if (insn_operand_matches (icode, opno, mem))
{
op->value = mem;
return true;
}
delete_insns_since (last);
}
}
return false;
}
/* Try to make OP match operand OPNO of instruction ICODE. Return true
on success, storing the new operand value back in OP. */
static bool
maybe_legitimize_operand (enum insn_code icode, unsigned int opno,
struct expand_operand *op)
{
machine_mode mode, imode;
bool old_volatile_ok, result;
mode = op->mode;
switch (op->type)
{
case EXPAND_FIXED:
old_volatile_ok = volatile_ok;
volatile_ok = true;
result = maybe_legitimize_operand_same_code (icode, opno, op);
volatile_ok = old_volatile_ok;
return result;
case EXPAND_OUTPUT:
gcc_assert (mode != VOIDmode);
if (op->value
&& op->value != const0_rtx
&& GET_MODE (op->value) == mode
&& maybe_legitimize_operand_same_code (icode, opno, op))
return true;
op->value = gen_reg_rtx (mode);
break;
case EXPAND_INPUT:
input:
gcc_assert (mode != VOIDmode);
gcc_assert (GET_MODE (op->value) == VOIDmode
|| GET_MODE (op->value) == mode);
if (maybe_legitimize_operand_same_code (icode, opno, op))
return true;
op->value = copy_to_mode_reg (mode, op->value);
break;
case EXPAND_CONVERT_TO:
gcc_assert (mode != VOIDmode);
op->value = convert_to_mode (mode, op->value, op->unsigned_p);
goto input;
case EXPAND_CONVERT_FROM:
if (GET_MODE (op->value) != VOIDmode)
mode = GET_MODE (op->value);
else
/* The caller must tell us what mode this value has. */
gcc_assert (mode != VOIDmode);
imode = insn_data[(int) icode].operand[opno].mode;
if (imode != VOIDmode && imode != mode)
{
op->value = convert_modes (imode, mode, op->value, op->unsigned_p);
mode = imode;
}
goto input;
case EXPAND_ADDRESS:
gcc_assert (mode != VOIDmode);
op->value = convert_memory_address (mode, op->value);
goto input;
case EXPAND_INTEGER:
mode = insn_data[(int) icode].operand[opno].mode;
if (mode != VOIDmode && const_int_operand (op->value, mode))
goto input;
break;
}
return insn_operand_matches (icode, opno, op->value);
}
/* Make OP describe an input operand that should have the same value
as VALUE, after any mode conversion that the target might request.
TYPE is the type of VALUE. */
void
create_convert_operand_from_type (struct expand_operand *op,
rtx value, tree type)
{
create_convert_operand_from (op, value, TYPE_MODE (type),
TYPE_UNSIGNED (type));
}
/* Try to make operands [OPS, OPS + NOPS) match operands [OPNO, OPNO + NOPS)
of instruction ICODE. Return true on success, leaving the new operand
values in the OPS themselves. Emit no code on failure. */
bool
maybe_legitimize_operands (enum insn_code icode, unsigned int opno,
unsigned int nops, struct expand_operand *ops)
{
rtx_insn *last;
unsigned int i;
last = get_last_insn ();
for (i = 0; i < nops; i++)
if (!maybe_legitimize_operand (icode, opno + i, &ops[i]))
{
delete_insns_since (last);
return false;
}
return true;
}
/* Try to generate instruction ICODE, using operands [OPS, OPS + NOPS)
as its operands. Return the instruction pattern on success,
and emit any necessary set-up code. Return null and emit no
code on failure. */
rtx
maybe_gen_insn (enum insn_code icode, unsigned int nops,
struct expand_operand *ops)
{
gcc_assert (nops == (unsigned int) insn_data[(int) icode].n_generator_args);
if (!maybe_legitimize_operands (icode, 0, nops, ops))
return NULL_RTX;
switch (nops)
{
case 1:
return GEN_FCN (icode) (ops[0].value);
case 2:
return GEN_FCN (icode) (ops[0].value, ops[1].value);
case 3:
return GEN_FCN (icode) (ops[0].value, ops[1].value, ops[2].value);
case 4:
return GEN_FCN (icode) (ops[0].value, ops[1].value, ops[2].value,
ops[3].value);
case 5:
return GEN_FCN (icode) (ops[0].value, ops[1].value, ops[2].value,
ops[3].value, ops[4].value);
case 6:
return GEN_FCN (icode) (ops[0].value, ops[1].value, ops[2].value,
ops[3].value, ops[4].value, ops[5].value);
case 7:
return GEN_FCN (icode) (ops[0].value, ops[1].value, ops[2].value,
ops[3].value, ops[4].value, ops[5].value,
ops[6].value);
case 8:
return GEN_FCN (icode) (ops[0].value, ops[1].value, ops[2].value,
ops[3].value, ops[4].value, ops[5].value,
ops[6].value, ops[7].value);
case 9:
return GEN_FCN (icode) (ops[0].value, ops[1].value, ops[2].value,
ops[3].value, ops[4].value, ops[5].value,
ops[6].value, ops[7].value, ops[8].value);
}
gcc_unreachable ();
}
/* Try to emit instruction ICODE, using operands [OPS, OPS + NOPS)
as its operands. Return true on success and emit no code on failure. */
bool
maybe_expand_insn (enum insn_code icode, unsigned int nops,
struct expand_operand *ops)
{
rtx pat = maybe_gen_insn (icode, nops, ops);
if (pat)
{
emit_insn (pat);
return true;
}
return false;
}
/* Like maybe_expand_insn, but for jumps. */
bool
maybe_expand_jump_insn (enum insn_code icode, unsigned int nops,
struct expand_operand *ops)
{
rtx pat = maybe_gen_insn (icode, nops, ops);
if (pat)
{
emit_jump_insn (pat);
return true;
}
return false;
}
/* Emit instruction ICODE, using operands [OPS, OPS + NOPS)
as its operands. */
void
expand_insn (enum insn_code icode, unsigned int nops,
struct expand_operand *ops)
{
if (!maybe_expand_insn (icode, nops, ops))
gcc_unreachable ();
}
/* Like expand_insn, but for jumps. */
void
expand_jump_insn (enum insn_code icode, unsigned int nops,
struct expand_operand *ops)
{
if (!maybe_expand_jump_insn (icode, nops, ops))
gcc_unreachable ();
}
/* Reduce conditional compilation elsewhere. */
#ifndef HAVE_insv
#define HAVE_insv 0
#define CODE_FOR_insv CODE_FOR_nothing
#endif
#ifndef HAVE_extv
#define HAVE_extv 0
#define CODE_FOR_extv CODE_FOR_nothing
#endif
#ifndef HAVE_extzv
#define HAVE_extzv 0
#define CODE_FOR_extzv CODE_FOR_nothing
#endif
/* Enumerates the possible types of structure operand to an
extraction_insn. */
enum extraction_type { ET_unaligned_mem, ET_reg };
/* Check whether insv, extv or extzv pattern ICODE can be used for an
insertion or extraction of type TYPE on a structure of mode MODE.
Return true if so and fill in *INSN accordingly. STRUCT_OP is the
operand number of the structure (the first sign_extract or zero_extract
operand) and FIELD_OP is the operand number of the field (the other
side of the set from the sign_extract or zero_extract). */
static bool
get_traditional_extraction_insn (extraction_insn *insn,
enum extraction_type type,
machine_mode mode,
enum insn_code icode,
int struct_op, int field_op)
{
const struct insn_data_d *data = &insn_data[icode];
machine_mode struct_mode = data->operand[struct_op].mode;
if (struct_mode == VOIDmode)
struct_mode = word_mode;
if (mode != struct_mode)
return false;
machine_mode field_mode = data->operand[field_op].mode;
if (field_mode == VOIDmode)
field_mode = word_mode;
machine_mode pos_mode = data->operand[struct_op + 2].mode;
if (pos_mode == VOIDmode)
pos_mode = word_mode;
insn->icode = icode;
insn->field_mode = field_mode;
insn->struct_mode = (type == ET_unaligned_mem ? byte_mode : struct_mode);
insn->pos_mode = pos_mode;
return true;
}
/* Return true if an optab exists to perform an insertion or extraction
of type TYPE in mode MODE. Describe the instruction in *INSN if so.
REG_OPTAB is the optab to use for register structures and
MISALIGN_OPTAB is the optab to use for misaligned memory structures.
POS_OP is the operand number of the bit position. */
static bool
get_optab_extraction_insn (struct extraction_insn *insn,
enum extraction_type type,
machine_mode mode, direct_optab reg_optab,
direct_optab misalign_optab, int pos_op)
{
direct_optab optab = (type == ET_unaligned_mem ? misalign_optab : reg_optab);
enum insn_code icode = direct_optab_handler (optab, mode);
if (icode == CODE_FOR_nothing)
return false;
const struct insn_data_d *data = &insn_data[icode];
insn->icode = icode;
insn->field_mode = mode;
insn->struct_mode = (type == ET_unaligned_mem ? BLKmode : mode);
insn->pos_mode = data->operand[pos_op].mode;
if (insn->pos_mode == VOIDmode)
insn->pos_mode = word_mode;
return true;
}
/* Return true if an instruction exists to perform an insertion or
extraction (PATTERN says which) of type TYPE in mode MODE.
Describe the instruction in *INSN if so. */
static bool
get_extraction_insn (extraction_insn *insn,
enum extraction_pattern pattern,
enum extraction_type type,
machine_mode mode)
{
switch (pattern)
{
case EP_insv:
if (HAVE_insv
&& get_traditional_extraction_insn (insn, type, mode,
CODE_FOR_insv, 0, 3))
return true;
return get_optab_extraction_insn (insn, type, mode, insv_optab,
insvmisalign_optab, 2);
case EP_extv:
if (HAVE_extv
&& get_traditional_extraction_insn (insn, type, mode,
CODE_FOR_extv, 1, 0))
return true;
return get_optab_extraction_insn (insn, type, mode, extv_optab,
extvmisalign_optab, 3);
case EP_extzv:
if (HAVE_extzv
&& get_traditional_extraction_insn (insn, type, mode,
CODE_FOR_extzv, 1, 0))
return true;
return get_optab_extraction_insn (insn, type, mode, extzv_optab,
extzvmisalign_optab, 3);
default:
gcc_unreachable ();
}
}
/* Return true if an instruction exists to access a field of mode
FIELDMODE in a structure that has STRUCT_BITS significant bits.
Describe the "best" such instruction in *INSN if so. PATTERN and
TYPE describe the type of insertion or extraction we want to perform.
For an insertion, the number of significant structure bits includes
all bits of the target. For an extraction, it need only include the
most significant bit of the field. Larger widths are acceptable
in both cases. */
static bool
get_best_extraction_insn (extraction_insn *insn,
enum extraction_pattern pattern,
enum extraction_type type,
unsigned HOST_WIDE_INT struct_bits,
machine_mode field_mode)
{
machine_mode mode = smallest_mode_for_size (struct_bits, MODE_INT);
while (mode != VOIDmode)
{
if (get_extraction_insn (insn, pattern, type, mode))
{
while (mode != VOIDmode
&& GET_MODE_SIZE (mode) <= GET_MODE_SIZE (field_mode)
&& !TRULY_NOOP_TRUNCATION_MODES_P (insn->field_mode,
field_mode))
{
get_extraction_insn (insn, pattern, type, mode);
mode = GET_MODE_WIDER_MODE (mode);
}
return true;
}
mode = GET_MODE_WIDER_MODE (mode);
}
return false;
}
/* Return true if an instruction exists to access a field of mode
FIELDMODE in a register structure that has STRUCT_BITS significant bits.
Describe the "best" such instruction in *INSN if so. PATTERN describes
the type of insertion or extraction we want to perform.
For an insertion, the number of significant structure bits includes
all bits of the target. For an extraction, it need only include the
most significant bit of the field. Larger widths are acceptable
in both cases. */
bool
get_best_reg_extraction_insn (extraction_insn *insn,
enum extraction_pattern pattern,
unsigned HOST_WIDE_INT struct_bits,
machine_mode field_mode)
{
return get_best_extraction_insn (insn, pattern, ET_reg, struct_bits,
field_mode);
}
/* Return true if an instruction exists to access a field of BITSIZE
bits starting BITNUM bits into a memory structure. Describe the
"best" such instruction in *INSN if so. PATTERN describes the type
of insertion or extraction we want to perform and FIELDMODE is the
natural mode of the extracted field.
The instructions considered here only access bytes that overlap
the bitfield; they do not touch any surrounding bytes. */
bool
get_best_mem_extraction_insn (extraction_insn *insn,
enum extraction_pattern pattern,
HOST_WIDE_INT bitsize, HOST_WIDE_INT bitnum,
machine_mode field_mode)
{
unsigned HOST_WIDE_INT struct_bits = (bitnum % BITS_PER_UNIT
+ bitsize
+ BITS_PER_UNIT - 1);
struct_bits -= struct_bits % BITS_PER_UNIT;
return get_best_extraction_insn (insn, pattern, ET_unaligned_mem,
struct_bits, field_mode);
}
/* Determine whether "1 << x" is relatively cheap in word_mode. */
bool
lshift_cheap_p (bool speed_p)
{
/* FIXME: This should be made target dependent via this "this_target"
mechanism, similar to e.g. can_copy_init_p in gcse.c. */
static bool init[2] = { false, false };
static bool cheap[2] = { true, true };
/* If the targer has no lshift in word_mode, the operation will most
probably not be cheap. ??? Does GCC even work for such targets? */
if (optab_handler (ashl_optab, word_mode) == CODE_FOR_nothing)
return false;
if (!init[speed_p])
{
rtx reg = gen_raw_REG (word_mode, 10000);
int cost = set_src_cost (gen_rtx_ASHIFT (word_mode, const1_rtx, reg),
speed_p);
cheap[speed_p] = cost < COSTS_N_INSNS (3);
init[speed_p] = true;
}
return cheap[speed_p];
}
#include "gt-optabs.h"