/* Perform various loop optimizations, including strength reduction. Copyright (C) 1987, 1988, 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. This file is part of GCC. GCC is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. GCC is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GCC; see the file COPYING. If not, write to the Free Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ /* This is the loop optimization pass of the compiler. It finds invariant computations within loops and moves them to the beginning of the loop. Then it identifies basic and general induction variables. Basic induction variables (BIVs) are a pseudo registers which are set within a loop only by incrementing or decrementing its value. General induction variables (GIVs) are pseudo registers with a value which is a linear function of a basic induction variable. BIVs are recognized by `basic_induction_var'; GIVs by `general_induction_var'. Once induction variables are identified, strength reduction is applied to the general induction variables, and induction variable elimination is applied to the basic induction variables. It also finds cases where a register is set within the loop by zero-extending a narrower value and changes these to zero the entire register once before the loop and merely copy the low part within the loop. Most of the complexity is in heuristics to decide when it is worth while to do these things. */ #include "config.h" #include "system.h" #include "coretypes.h" #include "tm.h" #include "rtl.h" #include "tm_p.h" #include "function.h" #include "expr.h" #include "hard-reg-set.h" #include "basic-block.h" #include "insn-config.h" #include "regs.h" #include "recog.h" #include "flags.h" #include "real.h" #include "cselib.h" #include "except.h" #include "toplev.h" #include "predict.h" #include "insn-flags.h" #include "optabs.h" #include "cfgloop.h" #include "ggc.h" #include "timevar.h" #include "tree-pass.h" /* Get the loop info pointer of a loop. */ #define LOOP_INFO(LOOP) ((struct loop_info *) (LOOP)->aux) /* Get a pointer to the loop movables structure. */ #define LOOP_MOVABLES(LOOP) (&LOOP_INFO (LOOP)->movables) /* Get a pointer to the loop registers structure. */ #define LOOP_REGS(LOOP) (&LOOP_INFO (LOOP)->regs) /* Get a pointer to the loop induction variables structure. */ #define LOOP_IVS(LOOP) (&LOOP_INFO (LOOP)->ivs) /* Get the luid of an insn. Catch the error of trying to reference the LUID of an insn added during loop, since these don't have LUIDs. */ #define INSN_LUID(INSN) \ (gcc_assert (INSN_UID (INSN) < max_uid_for_loop), uid_luid[INSN_UID (INSN)]) #define REGNO_FIRST_LUID(REGNO) \ (REGNO_FIRST_UID (REGNO) < max_uid_for_loop \ ? uid_luid[REGNO_FIRST_UID (REGNO)] \ : 0) #define REGNO_LAST_LUID(REGNO) \ (REGNO_LAST_UID (REGNO) < max_uid_for_loop \ ? uid_luid[REGNO_LAST_UID (REGNO)] \ : INT_MAX) /* A "basic induction variable" or biv is a pseudo reg that is set (within this loop) only by incrementing or decrementing it. */ /* A "general induction variable" or giv is a pseudo reg whose value is a linear function of a biv. */ /* Bivs are recognized by `basic_induction_var'; Givs by `general_induction_var'. */ /* An enum for the two different types of givs, those that are used as memory addresses and those that are calculated into registers. */ enum g_types { DEST_ADDR, DEST_REG }; /* A `struct induction' is created for every instruction that sets an induction variable (either a biv or a giv). */ struct induction { rtx insn; /* The insn that sets a biv or giv */ rtx new_reg; /* New register, containing strength reduced version of this giv. */ rtx src_reg; /* Biv from which this giv is computed. (If this is a biv, then this is the biv.) */ enum g_types giv_type; /* Indicate whether DEST_ADDR or DEST_REG */ rtx dest_reg; /* Destination register for insn: this is the register which was the biv or giv. For a biv, this equals src_reg. For a DEST_ADDR type giv, this is 0. */ rtx *location; /* Place in the insn where this giv occurs. If GIV_TYPE is DEST_REG, this is 0. */ /* For a biv, this is the place where add_val was found. */ enum machine_mode mode; /* The mode of this biv or giv */ rtx mem; /* For DEST_ADDR, the memory object. */ rtx mult_val; /* Multiplicative factor for src_reg. */ rtx add_val; /* Additive constant for that product. */ int benefit; /* Gain from eliminating this insn. */ rtx final_value; /* If the giv is used outside the loop, and its final value could be calculated, it is put here, and the giv is made replaceable. Set the giv to this value before the loop. */ unsigned combined_with; /* The number of givs this giv has been combined with. If nonzero, this giv cannot combine with any other giv. */ unsigned replaceable : 1; /* 1 if we can substitute the strength-reduced variable for the original variable. 0 means they must be kept separate and the new one must be copied into the old pseudo reg each time the old one is set. */ unsigned not_replaceable : 1; /* Used to prevent duplicating work. This is 1 if we know that the giv definitely can not be made replaceable, in which case we don't bother checking the variable again even if further info is available. Both this and the above can be zero. */ unsigned ignore : 1; /* 1 prohibits further processing of giv */ unsigned always_computable : 1;/* 1 if this value is computable every iteration. */ unsigned always_executed : 1; /* 1 if this set occurs each iteration. */ unsigned maybe_multiple : 1; /* Only used for a biv and 1 if this biv update may be done multiple times per iteration. */ unsigned cant_derive : 1; /* For giv's, 1 if this giv cannot derive another giv. This occurs in many cases where a giv's lifetime spans an update to a biv. */ unsigned maybe_dead : 1; /* 1 if this giv might be dead. In that case, we won't use it to eliminate a biv, it would probably lose. */ unsigned auto_inc_opt : 1; /* 1 if this giv had its increment output next to it to try to form an auto-inc address. */ unsigned shared : 1; unsigned no_const_addval : 1; /* 1 if add_val does not contain a const. */ int lifetime; /* Length of life of this giv */ rtx derive_adjustment; /* If nonzero, is an adjustment to be subtracted from add_val when this giv derives another. This occurs when the giv spans a biv update by incrementation. */ rtx ext_dependent; /* If nonzero, is a sign or zero extension if a biv on which this giv is dependent. */ struct induction *next_iv; /* For givs, links together all givs that are based on the same biv. For bivs, links together all biv entries that refer to the same biv register. */ struct induction *same; /* For givs, if the giv has been combined with another giv, this points to the base giv. The base giv will have COMBINED_WITH nonzero. For bivs, if the biv has the same LOCATION than another biv, this points to the base biv. */ struct induction *same_insn; /* If there are multiple identical givs in the same insn, then all but one have this field set, and they all point to the giv that doesn't have this field set. */ rtx last_use; /* For a giv made from a biv increment, this is a substitute for the lifetime information. */ }; /* A `struct iv_class' is created for each biv. */ struct iv_class { unsigned int regno; /* Pseudo reg which is the biv. */ int biv_count; /* Number of insns setting this reg. */ struct induction *biv; /* List of all insns that set this reg. */ int giv_count; /* Number of DEST_REG givs computed from this biv. The resulting count is only used in check_dbra_loop. */ struct induction *giv; /* List of all insns that compute a giv from this reg. */ int total_benefit; /* Sum of BENEFITs of all those givs. */ rtx initial_value; /* Value of reg at loop start. */ rtx initial_test; /* Test performed on BIV before loop. */ rtx final_value; /* Value of reg at loop end, if known. */ struct iv_class *next; /* Links all class structures together. */ rtx init_insn; /* insn which initializes biv, 0 if none. */ rtx init_set; /* SET of INIT_INSN, if any. */ unsigned incremented : 1; /* 1 if somewhere incremented/decremented */ unsigned eliminable : 1; /* 1 if plausible candidate for elimination. */ unsigned nonneg : 1; /* 1 if we added a REG_NONNEG note for this. */ unsigned reversed : 1; /* 1 if we reversed the loop that this biv controls. */ unsigned all_reduced : 1; /* 1 if all givs using this biv have been reduced. */ }; /* Definitions used by the basic induction variable discovery code. */ enum iv_mode { UNKNOWN_INDUCT, BASIC_INDUCT, NOT_BASIC_INDUCT, GENERAL_INDUCT }; /* A `struct iv' is created for every register. */ struct iv { enum iv_mode type; union { struct iv_class *class; struct induction *info; } iv; }; #define REG_IV_TYPE(ivs, n) ivs->regs[n].type #define REG_IV_INFO(ivs, n) ivs->regs[n].iv.info #define REG_IV_CLASS(ivs, n) ivs->regs[n].iv.class struct loop_ivs { /* Indexed by register number, contains pointer to `struct iv' if register is an induction variable. */ struct iv *regs; /* Size of regs array. */ unsigned int n_regs; /* The head of a list which links together (via the next field) every iv class for the current loop. */ struct iv_class *list; }; typedef struct loop_mem_info { rtx mem; /* The MEM itself. */ rtx reg; /* Corresponding pseudo, if any. */ int optimize; /* Nonzero if we can optimize access to this MEM. */ } loop_mem_info; struct loop_reg { /* Number of times the reg is set during the loop being scanned. During code motion, a negative value indicates a reg that has been made a candidate; in particular -2 means that it is an candidate that we know is equal to a constant and -1 means that it is a candidate not known equal to a constant. After code motion, regs moved have 0 (which is accurate now) while the failed candidates have the original number of times set. Therefore, at all times, == 0 indicates an invariant register; < 0 a conditionally invariant one. */ int set_in_loop; /* Original value of set_in_loop; same except that this value is not set negative for a reg whose sets have been made candidates and not set to 0 for a reg that is moved. */ int n_times_set; /* Contains the insn in which a register was used if it was used exactly once; contains const0_rtx if it was used more than once. */ rtx single_usage; /* Nonzero indicates that the register cannot be moved or strength reduced. */ char may_not_optimize; /* Nonzero means reg N has already been moved out of one loop. This reduces the desire to move it out of another. */ char moved_once; }; struct loop_regs { int num; /* Number of regs used in table. */ int size; /* Size of table. */ struct loop_reg *array; /* Register usage info. array. */ int multiple_uses; /* Nonzero if a reg has multiple uses. */ }; struct loop_movables { /* Head of movable chain. */ struct movable *head; /* Last movable in chain. */ struct movable *last; }; /* Information pertaining to a loop. */ struct loop_info { /* Nonzero if there is a subroutine call in the current loop. */ int has_call; /* Nonzero if there is a libcall in the current loop. */ int has_libcall; /* Nonzero if there is a non constant call in the current loop. */ int has_nonconst_call; /* Nonzero if there is a prefetch instruction in the current loop. */ int has_prefetch; /* Nonzero if there is a volatile memory reference in the current loop. */ int has_volatile; /* Nonzero if there is a tablejump in the current loop. */ int has_tablejump; /* Nonzero if there are ways to leave the loop other than falling off the end. */ int has_multiple_exit_targets; /* Nonzero if there is an indirect jump in the current function. */ int has_indirect_jump; /* Register or constant initial loop value. */ rtx initial_value; /* Register or constant value used for comparison test. */ rtx comparison_value; /* Register or constant approximate final value. */ rtx final_value; /* Register or constant initial loop value with term common to final_value removed. */ rtx initial_equiv_value; /* Register or constant final loop value with term common to initial_value removed. */ rtx final_equiv_value; /* Register corresponding to iteration variable. */ rtx iteration_var; /* Constant loop increment. */ rtx increment; enum rtx_code comparison_code; /* Holds the number of loop iterations. It is zero if the number could not be calculated. Must be unsigned since the number of iterations can be as high as 2^wordsize - 1. For loops with a wider iterator, this number will be zero if the number of loop iterations is too large for an unsigned integer to hold. */ unsigned HOST_WIDE_INT n_iterations; int used_count_register; /* The loop iterator induction variable. */ struct iv_class *iv; /* List of MEMs that are stored in this loop. */ rtx store_mems; /* Array of MEMs that are used (read or written) in this loop, but cannot be aliased by anything in this loop, except perhaps themselves. In other words, if mems[i] is altered during the loop, it is altered by an expression that is rtx_equal_p to it. */ loop_mem_info *mems; /* The index of the next available slot in MEMS. */ int mems_idx; /* The number of elements allocated in MEMS. */ int mems_allocated; /* Nonzero if we don't know what MEMs were changed in the current loop. This happens if the loop contains a call (in which case `has_call' will also be set) or if we store into more than NUM_STORES MEMs. */ int unknown_address_altered; /* The above doesn't count any readonly memory locations that are stored. This does. */ int unknown_constant_address_altered; /* Count of memory write instructions discovered in the loop. */ int num_mem_sets; /* The insn where the first of these was found. */ rtx first_loop_store_insn; /* The chain of movable insns in loop. */ struct loop_movables movables; /* The registers used the in loop. */ struct loop_regs regs; /* The induction variable information in loop. */ struct loop_ivs ivs; /* Nonzero if call is in pre_header extended basic block. */ int pre_header_has_call; }; /* Not really meaningful values, but at least something. */ #ifndef SIMULTANEOUS_PREFETCHES #define SIMULTANEOUS_PREFETCHES 3 #endif #ifndef PREFETCH_BLOCK #define PREFETCH_BLOCK 32 #endif #ifndef HAVE_prefetch #define HAVE_prefetch 0 #define CODE_FOR_prefetch 0 #define gen_prefetch(a,b,c) (gcc_unreachable (), NULL_RTX) #endif /* Give up the prefetch optimizations once we exceed a given threshold. It is unlikely that we would be able to optimize something in a loop with so many detected prefetches. */ #define MAX_PREFETCHES 100 /* The number of prefetch blocks that are beneficial to fetch at once before a loop with a known (and low) iteration count. */ #define PREFETCH_BLOCKS_BEFORE_LOOP_MAX 6 /* For very tiny loops it is not worthwhile to prefetch even before the loop, since it is likely that the data are already in the cache. */ #define PREFETCH_BLOCKS_BEFORE_LOOP_MIN 2 /* Parameterize some prefetch heuristics so they can be turned on and off easily for performance testing on new architectures. These can be defined in target-dependent files. */ /* Prefetch is worthwhile only when loads/stores are dense. */ #ifndef PREFETCH_ONLY_DENSE_MEM #define PREFETCH_ONLY_DENSE_MEM 1 #endif /* Define what we mean by "dense" loads and stores; This value divided by 256 is the minimum percentage of memory references that worth prefetching. */ #ifndef PREFETCH_DENSE_MEM #define PREFETCH_DENSE_MEM 220 #endif /* Do not prefetch for a loop whose iteration count is known to be low. */ #ifndef PREFETCH_NO_LOW_LOOPCNT #define PREFETCH_NO_LOW_LOOPCNT 1 #endif /* Define what we mean by a "low" iteration count. */ #ifndef PREFETCH_LOW_LOOPCNT #define PREFETCH_LOW_LOOPCNT 32 #endif /* Do not prefetch for a loop that contains a function call; such a loop is probably not an internal loop. */ #ifndef PREFETCH_NO_CALL #define PREFETCH_NO_CALL 1 #endif /* Do not prefetch accesses with an extreme stride. */ #ifndef PREFETCH_NO_EXTREME_STRIDE #define PREFETCH_NO_EXTREME_STRIDE 1 #endif /* Define what we mean by an "extreme" stride. */ #ifndef PREFETCH_EXTREME_STRIDE #define PREFETCH_EXTREME_STRIDE 4096 #endif /* Define a limit to how far apart indices can be and still be merged into a single prefetch. */ #ifndef PREFETCH_EXTREME_DIFFERENCE #define PREFETCH_EXTREME_DIFFERENCE 4096 #endif /* Issue prefetch instructions before the loop to fetch data to be used in the first few loop iterations. */ #ifndef PREFETCH_BEFORE_LOOP #define PREFETCH_BEFORE_LOOP 1 #endif /* Do not handle reversed order prefetches (negative stride). */ #ifndef PREFETCH_NO_REVERSE_ORDER #define PREFETCH_NO_REVERSE_ORDER 1 #endif /* Prefetch even if the GIV is in conditional code. */ #ifndef PREFETCH_CONDITIONAL #define PREFETCH_CONDITIONAL 1 #endif #define LOOP_REG_LIFETIME(LOOP, REGNO) \ ((REGNO_LAST_LUID (REGNO) - REGNO_FIRST_LUID (REGNO))) #define LOOP_REG_GLOBAL_P(LOOP, REGNO) \ ((REGNO_LAST_LUID (REGNO) > INSN_LUID ((LOOP)->end) \ || REGNO_FIRST_LUID (REGNO) < INSN_LUID ((LOOP)->start))) #define LOOP_REGNO_NREGS(REGNO, SET_DEST) \ ((REGNO) < FIRST_PSEUDO_REGISTER \ ? (int) hard_regno_nregs[(REGNO)][GET_MODE (SET_DEST)] : 1) /* Vector mapping INSN_UIDs to luids. The luids are like uids but increase monotonically always. We use them to see whether a jump comes from outside a given loop. */ static int *uid_luid; /* Indexed by INSN_UID, contains the ordinal giving the (innermost) loop number the insn is contained in. */ static struct loop **uid_loop; /* 1 + largest uid of any insn. */ static int max_uid_for_loop; /* Number of loops detected in current function. Used as index to the next few tables. */ static int max_loop_num; /* Bound on pseudo register number before loop optimization. A pseudo has valid regscan info if its number is < max_reg_before_loop. */ static unsigned int max_reg_before_loop; /* The value to pass to the next call of reg_scan_update. */ static int loop_max_reg; /* During the analysis of a loop, a chain of `struct movable's is made to record all the movable insns found. Then the entire chain can be scanned to decide which to move. */ struct movable { rtx insn; /* A movable insn */ rtx set_src; /* The expression this reg is set from. */ rtx set_dest; /* The destination of this SET. */ rtx dependencies; /* When INSN is libcall, this is an EXPR_LIST of any registers used within the LIBCALL. */ int consec; /* Number of consecutive following insns that must be moved with this one. */ unsigned int regno; /* The register it sets */ short lifetime; /* lifetime of that register; may be adjusted when matching movables that load the same value are found. */ short savings; /* Number of insns we can move for this reg, including other movables that force this or match this one. */ ENUM_BITFIELD(machine_mode) savemode : 8; /* Nonzero means it is a mode for a low part that we should avoid changing when clearing the rest of the reg. */ unsigned int cond : 1; /* 1 if only conditionally movable */ unsigned int force : 1; /* 1 means MUST move this insn */ unsigned int global : 1; /* 1 means reg is live outside this loop */ /* If PARTIAL is 1, GLOBAL means something different: that the reg is live outside the range from where it is set to the following label. */ unsigned int done : 1; /* 1 inhibits further processing of this */ unsigned int partial : 1; /* 1 means this reg is used for zero-extending. In particular, moving it does not make it invariant. */ unsigned int move_insn : 1; /* 1 means that we call emit_move_insn to load SRC, rather than copying INSN. */ unsigned int move_insn_first:1;/* Same as above, if this is necessary for the first insn of a consecutive sets group. */ unsigned int is_equiv : 1; /* 1 means a REG_EQUIV is present on INSN. */ unsigned int insert_temp : 1; /* 1 means we copy to a new pseudo and replace the original insn with a copy from that pseudo, rather than deleting it. */ struct movable *match; /* First entry for same value */ struct movable *forces; /* An insn that must be moved if this is */ struct movable *next; }; static FILE *loop_dump_stream; /* Forward declarations. */ static void invalidate_loops_containing_label (rtx); static void find_and_verify_loops (rtx, struct loops *); static void mark_loop_jump (rtx, struct loop *); static void prescan_loop (struct loop *); static int reg_in_basic_block_p (rtx, rtx); static int consec_sets_invariant_p (const struct loop *, rtx, int, rtx); static int labels_in_range_p (rtx, int); static void count_one_set (struct loop_regs *, rtx, rtx, rtx *); static void note_addr_stored (rtx, rtx, void *); static void note_set_pseudo_multiple_uses (rtx, rtx, void *); static int loop_reg_used_before_p (const struct loop *, rtx, rtx); static rtx find_regs_nested (rtx, rtx); static void scan_loop (struct loop*, int); #if 0 static void replace_call_address (rtx, rtx, rtx); #endif static rtx skip_consec_insns (rtx, int); static int libcall_benefit (rtx); static rtx libcall_other_reg (rtx, rtx); static void record_excess_regs (rtx, rtx, rtx *); static void ignore_some_movables (struct loop_movables *); static void force_movables (struct loop_movables *); static void combine_movables (struct loop_movables *, struct loop_regs *); static int num_unmoved_movables (const struct loop *); static int regs_match_p (rtx, rtx, struct loop_movables *); static int rtx_equal_for_loop_p (rtx, rtx, struct loop_movables *, struct loop_regs *); static void add_label_notes (rtx, rtx); static void move_movables (struct loop *loop, struct loop_movables *, int, int); static void loop_movables_add (struct loop_movables *, struct movable *); static void loop_movables_free (struct loop_movables *); static int count_nonfixed_reads (const struct loop *, rtx); static void loop_bivs_find (struct loop *); static void loop_bivs_init_find (struct loop *); static void loop_bivs_check (struct loop *); static void loop_givs_find (struct loop *); static void loop_givs_check (struct loop *); static int loop_biv_eliminable_p (struct loop *, struct iv_class *, int, int); static int loop_giv_reduce_benefit (struct loop *, struct iv_class *, struct induction *, rtx); static void loop_givs_dead_check (struct loop *, struct iv_class *); static void loop_givs_reduce (struct loop *, struct iv_class *); static void loop_givs_rescan (struct loop *, struct iv_class *, rtx *); static void loop_ivs_free (struct loop *); static void strength_reduce (struct loop *, int); static void find_single_use_in_loop (struct loop_regs *, rtx, rtx); static int valid_initial_value_p (rtx, rtx, int, rtx); static void find_mem_givs (const struct loop *, rtx, rtx, int, int); static void record_biv (struct loop *, struct induction *, rtx, rtx, rtx, rtx, rtx *, int, int); static void check_final_value (const struct loop *, struct induction *); static void loop_ivs_dump (const struct loop *, FILE *, int); static void loop_iv_class_dump (const struct iv_class *, FILE *, int); static void loop_biv_dump (const struct induction *, FILE *, int); static void loop_giv_dump (const struct induction *, FILE *, int); static void record_giv (const struct loop *, struct induction *, rtx, rtx, rtx, rtx, rtx, rtx, int, enum g_types, int, int, rtx *); static void update_giv_derive (const struct loop *, rtx); static HOST_WIDE_INT get_monotonic_increment (struct iv_class *); static bool biased_biv_fits_mode_p (const struct loop *, struct iv_class *, HOST_WIDE_INT, enum machine_mode, unsigned HOST_WIDE_INT); static bool biv_fits_mode_p (const struct loop *, struct iv_class *, HOST_WIDE_INT, enum machine_mode, bool); static bool extension_within_bounds_p (const struct loop *, struct iv_class *, HOST_WIDE_INT, rtx); static void check_ext_dependent_givs (const struct loop *, struct iv_class *); static int basic_induction_var (const struct loop *, rtx, enum machine_mode, rtx, rtx, rtx *, rtx *, rtx **); static rtx simplify_giv_expr (const struct loop *, rtx, rtx *, int *); static int general_induction_var (const struct loop *loop, rtx, rtx *, rtx *, rtx *, rtx *, int, int *, enum machine_mode); static int consec_sets_giv (const struct loop *, int, rtx, rtx, rtx, rtx *, rtx *, rtx *, rtx *); static int check_dbra_loop (struct loop *, int); static rtx express_from_1 (rtx, rtx, rtx); static rtx combine_givs_p (struct induction *, struct induction *); static int cmp_combine_givs_stats (const void *, const void *); static void combine_givs (struct loop_regs *, struct iv_class *); static int product_cheap_p (rtx, rtx); static int maybe_eliminate_biv (const struct loop *, struct iv_class *, int, int, int); static int maybe_eliminate_biv_1 (const struct loop *, rtx, rtx, struct iv_class *, int, basic_block, rtx); static int last_use_this_basic_block (rtx, rtx); static void record_initial (rtx, rtx, void *); static void update_reg_last_use (rtx, rtx); static rtx next_insn_in_loop (const struct loop *, rtx); static void loop_regs_scan (const struct loop *, int); static int count_insns_in_loop (const struct loop *); static int find_mem_in_note_1 (rtx *, void *); static rtx find_mem_in_note (rtx); static void load_mems (const struct loop *); static int insert_loop_mem (rtx *, void *); static int replace_loop_mem (rtx *, void *); static void replace_loop_mems (rtx, rtx, rtx, int); static int replace_loop_reg (rtx *, void *); static void replace_loop_regs (rtx insn, rtx, rtx); static void note_reg_stored (rtx, rtx, void *); static void try_copy_prop (const struct loop *, rtx, unsigned int); static void try_swap_copy_prop (const struct loop *, rtx, unsigned int); static rtx check_insn_for_givs (struct loop *, rtx, int, int); static rtx check_insn_for_bivs (struct loop *, rtx, int, int); static rtx gen_add_mult (rtx, rtx, rtx, rtx); static void loop_regs_update (const struct loop *, rtx); static int iv_add_mult_cost (rtx, rtx, rtx, rtx); static int loop_invariant_p (const struct loop *, rtx); static rtx loop_insn_hoist (const struct loop *, rtx); static void loop_iv_add_mult_emit_before (const struct loop *, rtx, rtx, rtx, rtx, basic_block, rtx); static rtx loop_insn_emit_before (const struct loop *, basic_block, rtx, rtx); static int loop_insn_first_p (rtx, rtx); static rtx get_condition_for_loop (const struct loop *, rtx); static void loop_iv_add_mult_sink (const struct loop *, rtx, rtx, rtx, rtx); static void loop_iv_add_mult_hoist (const struct loop *, rtx, rtx, rtx, rtx); static rtx extend_value_for_giv (struct induction *, rtx); static rtx loop_insn_sink (const struct loop *, rtx); static rtx loop_insn_emit_after (const struct loop *, basic_block, rtx, rtx); static rtx loop_call_insn_emit_before (const struct loop *, basic_block, rtx, rtx); static rtx loop_call_insn_hoist (const struct loop *, rtx); static rtx loop_insn_sink_or_swim (const struct loop *, rtx); static void loop_dump_aux (const struct loop *, FILE *, int); static void loop_delete_insns (rtx, rtx); static HOST_WIDE_INT remove_constant_addition (rtx *); static rtx gen_load_of_final_value (rtx, rtx); void debug_ivs (const struct loop *); void debug_iv_class (const struct iv_class *); void debug_biv (const struct induction *); void debug_giv (const struct induction *); void debug_loop (const struct loop *); void debug_loops (const struct loops *); typedef struct loop_replace_args { rtx match; rtx replacement; rtx insn; } loop_replace_args; /* Nonzero iff INSN is between START and END, inclusive. */ #define INSN_IN_RANGE_P(INSN, START, END) \ (INSN_UID (INSN) < max_uid_for_loop \ && INSN_LUID (INSN) >= INSN_LUID (START) \ && INSN_LUID (INSN) <= INSN_LUID (END)) /* Indirect_jump_in_function is computed once per function. */ static int indirect_jump_in_function; static int indirect_jump_in_function_p (rtx); static int compute_luids (rtx, rtx, int); static int biv_elimination_giv_has_0_offset (struct induction *, struct induction *, rtx); /* Benefit penalty, if a giv is not replaceable, i.e. must emit an insn to copy the value of the strength reduced giv to its original register. */ static int copy_cost; /* Cost of using a register, to normalize the benefits of a giv. */ static int reg_address_cost; void init_loop (void) { rtx reg = gen_rtx_REG (word_mode, LAST_VIRTUAL_REGISTER + 1); reg_address_cost = address_cost (reg, SImode); copy_cost = COSTS_N_INSNS (1); } /* Compute the mapping from uids to luids. LUIDs are numbers assigned to insns, like uids, except that luids increase monotonically through the code. Start at insn START and stop just before END. Assign LUIDs starting with PREV_LUID + 1. Return the last assigned LUID + 1. */ static int compute_luids (rtx start, rtx end, int prev_luid) { int i; rtx insn; for (insn = start, i = prev_luid; insn != end; insn = NEXT_INSN (insn)) { if (INSN_UID (insn) >= max_uid_for_loop) continue; /* Don't assign luids to line-number NOTEs, so that the distance in luids between two insns is not affected by -g. */ if (!NOTE_P (insn) || NOTE_LINE_NUMBER (insn) <= 0) uid_luid[INSN_UID (insn)] = ++i; else /* Give a line number note the same luid as preceding insn. */ uid_luid[INSN_UID (insn)] = i; } return i + 1; } /* Entry point of this file. Perform loop optimization on the current function. F is the first insn of the function and DUMPFILE is a stream for output of a trace of actions taken (or 0 if none should be output). */ void loop_optimize (rtx f, FILE *dumpfile, int flags) { rtx insn; int i; struct loops loops_data; struct loops *loops = &loops_data; struct loop_info *loops_info; loop_dump_stream = dumpfile; init_recog_no_volatile (); max_reg_before_loop = max_reg_num (); loop_max_reg = max_reg_before_loop; regs_may_share = 0; /* Count the number of loops. */ max_loop_num = 0; for (insn = f; insn; insn = NEXT_INSN (insn)) { if (NOTE_P (insn) && NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_BEG) max_loop_num++; } /* Don't waste time if no loops. */ if (max_loop_num == 0) return; loops->num = max_loop_num; /* Get size to use for tables indexed by uids. Leave some space for labels allocated by find_and_verify_loops. */ max_uid_for_loop = get_max_uid () + 1 + max_loop_num * 32; uid_luid = xcalloc (max_uid_for_loop, sizeof (int)); uid_loop = xcalloc (max_uid_for_loop, sizeof (struct loop *)); /* Allocate storage for array of loops. */ loops->array = xcalloc (loops->num, sizeof (struct loop)); /* Find and process each loop. First, find them, and record them in order of their beginnings. */ find_and_verify_loops (f, loops); /* Allocate and initialize auxiliary loop information. */ loops_info = xcalloc (loops->num, sizeof (struct loop_info)); for (i = 0; i < (int) loops->num; i++) loops->array[i].aux = loops_info + i; /* Now find all register lifetimes. This must be done after find_and_verify_loops, because it might reorder the insns in the function. */ reg_scan (f, max_reg_before_loop); /* This must occur after reg_scan so that registers created by gcse will have entries in the register tables. We could have added a call to reg_scan after gcse_main in toplev.c, but moving this call to init_alias_analysis is more efficient. */ init_alias_analysis (); /* See if we went too far. Note that get_max_uid already returns one more that the maximum uid of all insn. */ gcc_assert (get_max_uid () <= max_uid_for_loop); /* Now reset it to the actual size we need. See above. */ max_uid_for_loop = get_max_uid (); /* find_and_verify_loops has already called compute_luids, but it might have rearranged code afterwards, so we need to recompute the luids now. */ compute_luids (f, NULL_RTX, 0); /* Don't leave gaps in uid_luid for insns that have been deleted. It is possible that the first or last insn using some register has been deleted by cross-jumping. Make sure that uid_luid for that former insn's uid points to the general area where that insn used to be. */ for (i = 0; i < max_uid_for_loop; i++) { uid_luid[0] = uid_luid[i]; if (uid_luid[0] != 0) break; } for (i = 0; i < max_uid_for_loop; i++) if (uid_luid[i] == 0) uid_luid[i] = uid_luid[i - 1]; /* Determine if the function has indirect jump. On some systems this prevents low overhead loop instructions from being used. */ indirect_jump_in_function = indirect_jump_in_function_p (f); /* Now scan the loops, last ones first, since this means inner ones are done before outer ones. */ for (i = max_loop_num - 1; i >= 0; i--) { struct loop *loop = &loops->array[i]; if (! loop->invalid && loop->end) { scan_loop (loop, flags); ggc_collect (); } } end_alias_analysis (); /* Clean up. */ for (i = 0; i < (int) loops->num; i++) free (loops_info[i].mems); free (uid_luid); free (uid_loop); free (loops_info); free (loops->array); } /* Returns the next insn, in execution order, after INSN. START and END are the NOTE_INSN_LOOP_BEG and NOTE_INSN_LOOP_END for the loop, respectively. LOOP->TOP, if non-NULL, is the top of the loop in the insn-stream; it is used with loops that are entered near the bottom. */ static rtx next_insn_in_loop (const struct loop *loop, rtx insn) { insn = NEXT_INSN (insn); if (insn == loop->end) { if (loop->top) /* Go to the top of the loop, and continue there. */ insn = loop->top; else /* We're done. */ insn = NULL_RTX; } if (insn == loop->scan_start) /* We're done. */ insn = NULL_RTX; return insn; } /* Find any register references hidden inside X and add them to the dependency list DEPS. This is used to look inside CLOBBER (MEM when checking whether a PARALLEL can be pulled out of a loop. */ static rtx find_regs_nested (rtx deps, rtx x) { enum rtx_code code = GET_CODE (x); if (code == REG) deps = gen_rtx_EXPR_LIST (VOIDmode, x, deps); else { const char *fmt = GET_RTX_FORMAT (code); int i, j; for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) { if (fmt[i] == 'e') deps = find_regs_nested (deps, XEXP (x, i)); else if (fmt[i] == 'E') for (j = 0; j < XVECLEN (x, i); j++) deps = find_regs_nested (deps, XVECEXP (x, i, j)); } } return deps; } /* Optimize one loop described by LOOP. */ /* ??? Could also move memory writes out of loops if the destination address is invariant, the source is invariant, the memory write is not volatile, and if we can prove that no read inside the loop can read this address before the write occurs. If there is a read of this address after the write, then we can also mark the memory read as invariant. */ static void scan_loop (struct loop *loop, int flags) { struct loop_info *loop_info = LOOP_INFO (loop); struct loop_regs *regs = LOOP_REGS (loop); int i; rtx loop_start = loop->start; rtx loop_end = loop->end; rtx p; /* 1 if we are scanning insns that could be executed zero times. */ int maybe_never = 0; /* 1 if we are scanning insns that might never be executed due to a subroutine call which might exit before they are reached. */ int call_passed = 0; /* Number of insns in the loop. */ int insn_count; int tem; rtx temp, update_start, update_end; /* The SET from an insn, if it is the only SET in the insn. */ rtx set, set1; /* Chain describing insns movable in current loop. */ struct loop_movables *movables = LOOP_MOVABLES (loop); /* Ratio of extra register life span we can justify for saving an instruction. More if loop doesn't call subroutines since in that case saving an insn makes more difference and more registers are available. */ int threshold; int in_libcall; loop->top = 0; movables->head = 0; movables->last = 0; /* Determine whether this loop starts with a jump down to a test at the end. This will occur for a small number of loops with a test that is too complex to duplicate in front of the loop. We search for the first insn or label in the loop, skipping NOTEs. However, we must be careful not to skip past a NOTE_INSN_LOOP_BEG (because we might have a loop executed only once that contains a loop which starts with a jump to its exit test) or a NOTE_INSN_LOOP_END (in case we have a degenerate loop). Note that if we mistakenly think that a loop is entered at the top when, in fact, it is entered at the exit test, the only effect will be slightly poorer optimization. Making the opposite error can generate incorrect code. Since very few loops now start with a jump to the exit test, the code here to detect that case is very conservative. */ for (p = NEXT_INSN (loop_start); p != loop_end && !LABEL_P (p) && ! INSN_P (p) && (!NOTE_P (p) || (NOTE_LINE_NUMBER (p) != NOTE_INSN_LOOP_BEG && NOTE_LINE_NUMBER (p) != NOTE_INSN_LOOP_END)); p = NEXT_INSN (p)) ; loop->scan_start = p; /* If loop end is the end of the current function, then emit a NOTE_INSN_DELETED after loop_end and set loop->sink to the dummy note insn. This is the position we use when sinking insns out of the loop. */ if (NEXT_INSN (loop->end) != 0) loop->sink = NEXT_INSN (loop->end); else loop->sink = emit_note_after (NOTE_INSN_DELETED, loop->end); /* Set up variables describing this loop. */ prescan_loop (loop); threshold = (loop_info->has_call ? 1 : 2) * (1 + n_non_fixed_regs); /* If loop has a jump before the first label, the true entry is the target of that jump. Start scan from there. But record in LOOP->TOP the place where the end-test jumps back to so we can scan that after the end of the loop. */ if (JUMP_P (p) /* Loop entry must be unconditional jump (and not a RETURN) */ && any_uncondjump_p (p) && JUMP_LABEL (p) != 0 /* Check to see whether the jump actually jumps out of the loop (meaning it's no loop). This case can happen for things like do {..} while (0). If this label was generated previously by loop, we can't tell anything about it and have to reject the loop. */ && INSN_IN_RANGE_P (JUMP_LABEL (p), loop_start, loop_end)) { loop->top = next_label (loop->scan_start); loop->scan_start = JUMP_LABEL (p); } /* If LOOP->SCAN_START was an insn created by loop, we don't know its luid as required by loop_reg_used_before_p. So skip such loops. (This test may never be true, but it's best to play it safe.) Also, skip loops where we do not start scanning at a label. This test also rejects loops starting with a JUMP_INSN that failed the test above. */ if (INSN_UID (loop->scan_start) >= max_uid_for_loop || !LABEL_P (loop->scan_start)) { if (loop_dump_stream) fprintf (loop_dump_stream, "\nLoop from %d to %d is phony.\n\n", INSN_UID (loop_start), INSN_UID (loop_end)); return; } /* Allocate extra space for REGs that might be created by load_mems. We allocate a little extra slop as well, in the hopes that we won't have to reallocate the regs array. */ loop_regs_scan (loop, loop_info->mems_idx + 16); insn_count = count_insns_in_loop (loop); if (loop_dump_stream) fprintf (loop_dump_stream, "\nLoop from %d to %d: %d real insns.\n", INSN_UID (loop_start), INSN_UID (loop_end), insn_count); /* Scan through the loop finding insns that are safe to move. Set REGS->ARRAY[I].SET_IN_LOOP negative for the reg I being set, so that this reg will be considered invariant for subsequent insns. We consider whether subsequent insns use the reg in deciding whether it is worth actually moving. MAYBE_NEVER is nonzero if we have passed a conditional jump insn and therefore it is possible that the insns we are scanning would never be executed. At such times, we must make sure that it is safe to execute the insn once instead of zero times. When MAYBE_NEVER is 0, all insns will be executed at least once so that is not a problem. */ for (in_libcall = 0, p = next_insn_in_loop (loop, loop->scan_start); p != NULL_RTX; p = next_insn_in_loop (loop, p)) { if (in_libcall && INSN_P (p) && find_reg_note (p, REG_RETVAL, NULL_RTX)) in_libcall--; if (NONJUMP_INSN_P (p)) { /* Do not scan past an optimization barrier. */ if (GET_CODE (PATTERN (p)) == ASM_INPUT) break; temp = find_reg_note (p, REG_LIBCALL, NULL_RTX); if (temp) in_libcall++; if (! in_libcall && (set = single_set (p)) && REG_P (SET_DEST (set)) && SET_DEST (set) != frame_pointer_rtx #ifdef PIC_OFFSET_TABLE_REG_CALL_CLOBBERED && SET_DEST (set) != pic_offset_table_rtx #endif && ! regs->array[REGNO (SET_DEST (set))].may_not_optimize) { int tem1 = 0; int tem2 = 0; int move_insn = 0; int insert_temp = 0; rtx src = SET_SRC (set); rtx dependencies = 0; /* Figure out what to use as a source of this insn. If a REG_EQUIV note is given or if a REG_EQUAL note with a constant operand is specified, use it as the source and mark that we should move this insn by calling emit_move_insn rather that duplicating the insn. Otherwise, only use the REG_EQUAL contents if a REG_RETVAL note is present. */ temp = find_reg_note (p, REG_EQUIV, NULL_RTX); if (temp) src = XEXP (temp, 0), move_insn = 1; else { temp = find_reg_note (p, REG_EQUAL, NULL_RTX); if (temp && CONSTANT_P (XEXP (temp, 0))) src = XEXP (temp, 0), move_insn = 1; if (temp && find_reg_note (p, REG_RETVAL, NULL_RTX)) { src = XEXP (temp, 0); /* A libcall block can use regs that don't appear in the equivalent expression. To move the libcall, we must move those regs too. */ dependencies = libcall_other_reg (p, src); } } /* For parallels, add any possible uses to the dependencies, as we can't move the insn without resolving them first. MEMs inside CLOBBERs may also reference registers; these count as implicit uses. */ if (GET_CODE (PATTERN (p)) == PARALLEL) { for (i = 0; i < XVECLEN (PATTERN (p), 0); i++) { rtx x = XVECEXP (PATTERN (p), 0, i); if (GET_CODE (x) == USE) dependencies = gen_rtx_EXPR_LIST (VOIDmode, XEXP (x, 0), dependencies); else if (GET_CODE (x) == CLOBBER && MEM_P (XEXP (x, 0))) dependencies = find_regs_nested (dependencies, XEXP (XEXP (x, 0), 0)); } } if (/* The register is used in basic blocks other than the one where it is set (meaning that something after this point in the loop might depend on its value before the set). */ ! reg_in_basic_block_p (p, SET_DEST (set)) /* And the set is not guaranteed to be executed once the loop starts, or the value before the set is needed before the set occurs... ??? Note we have quadratic behavior here, mitigated by the fact that the previous test will often fail for large loops. Rather than re-scanning the entire loop each time for register usage, we should build tables of the register usage and use them here instead. */ && (maybe_never || loop_reg_used_before_p (loop, set, p))) /* It is unsafe to move the set. However, it may be OK to move the source into a new pseudo, and substitute a reg-to-reg copy for the original insn. This code used to consider it OK to move a set of a variable which was not created by the user and not used in an exit test. That behavior is incorrect and was removed. */ insert_temp = 1; /* Don't try to optimize a MODE_CC set with a constant source. It probably will be combined with a conditional jump. */ if (GET_MODE_CLASS (GET_MODE (SET_DEST (set))) == MODE_CC && CONSTANT_P (src)) ; /* Don't try to optimize a register that was made by loop-optimization for an inner loop. We don't know its life-span, so we can't compute the benefit. */ else if (REGNO (SET_DEST (set)) >= max_reg_before_loop) ; /* Don't move the source and add a reg-to-reg copy: - with -Os (this certainly increases size), - if the mode doesn't support copy operations (obviously), - if the source is already a reg (the motion will gain nothing), - if the source is a legitimate constant (likewise). */ else if (insert_temp && (optimize_size || ! can_copy_p (GET_MODE (SET_SRC (set))) || REG_P (SET_SRC (set)) || (CONSTANT_P (SET_SRC (set)) && LEGITIMATE_CONSTANT_P (SET_SRC (set))))) ; else if ((tem = loop_invariant_p (loop, src)) && (dependencies == 0 || (tem2 = loop_invariant_p (loop, dependencies)) != 0) && (regs->array[REGNO (SET_DEST (set))].set_in_loop == 1 || (tem1 = consec_sets_invariant_p (loop, SET_DEST (set), regs->array[REGNO (SET_DEST (set))].set_in_loop, p))) /* If the insn can cause a trap (such as divide by zero), can't move it unless it's guaranteed to be executed once loop is entered. Even a function call might prevent the trap insn from being reached (since it might exit!) */ && ! ((maybe_never || call_passed) && may_trap_p (src))) { struct movable *m; int regno = REGNO (SET_DEST (set)); /* A potential lossage is where we have a case where two insns can be combined as long as they are both in the loop, but we move one of them outside the loop. For large loops, this can lose. The most common case of this is the address of a function being called. Therefore, if this register is marked as being used exactly once if we are in a loop with calls (a "large loop"), see if we can replace the usage of this register with the source of this SET. If we can, delete this insn. Don't do this if P has a REG_RETVAL note or if we have SMALL_REGISTER_CLASSES and SET_SRC is a hard register. */ if (loop_info->has_call && regs->array[regno].single_usage != 0 && regs->array[regno].single_usage != const0_rtx && REGNO_FIRST_UID (regno) == INSN_UID (p) && (REGNO_LAST_UID (regno) == INSN_UID (regs->array[regno].single_usage)) && regs->array[regno].set_in_loop == 1 && GET_CODE (SET_SRC (set)) != ASM_OPERANDS && ! side_effects_p (SET_SRC (set)) && ! find_reg_note (p, REG_RETVAL, NULL_RTX) && (! SMALL_REGISTER_CLASSES || (! (REG_P (SET_SRC (set)) && (REGNO (SET_SRC (set)) < FIRST_PSEUDO_REGISTER)))) && regno >= FIRST_PSEUDO_REGISTER /* This test is not redundant; SET_SRC (set) might be a call-clobbered register and the life of REGNO might span a call. */ && ! modified_between_p (SET_SRC (set), p, regs->array[regno].single_usage) && no_labels_between_p (p, regs->array[regno].single_usage) && validate_replace_rtx (SET_DEST (set), SET_SRC (set), regs->array[regno].single_usage)) { /* Replace any usage in a REG_EQUAL note. Must copy the new source, so that we don't get rtx sharing between the SET_SOURCE and REG_NOTES of insn p. */ REG_NOTES (regs->array[regno].single_usage) = (replace_rtx (REG_NOTES (regs->array[regno].single_usage), SET_DEST (set), copy_rtx (SET_SRC (set)))); delete_insn (p); for (i = 0; i < LOOP_REGNO_NREGS (regno, SET_DEST (set)); i++) regs->array[regno+i].set_in_loop = 0; continue; } m = xmalloc (sizeof (struct movable)); m->next = 0; m->insn = p; m->set_src = src; m->dependencies = dependencies; m->set_dest = SET_DEST (set); m->force = 0; m->consec = regs->array[REGNO (SET_DEST (set))].set_in_loop - 1; m->done = 0; m->forces = 0; m->partial = 0; m->move_insn = move_insn; m->move_insn_first = 0; m->insert_temp = insert_temp; m->is_equiv = (find_reg_note (p, REG_EQUIV, NULL_RTX) != 0); m->savemode = VOIDmode; m->regno = regno; /* Set M->cond if either loop_invariant_p or consec_sets_invariant_p returned 2 (only conditionally invariant). */ m->cond = ((tem | tem1 | tem2) > 1); m->global = LOOP_REG_GLOBAL_P (loop, regno); m->match = 0; m->lifetime = LOOP_REG_LIFETIME (loop, regno); m->savings = regs->array[regno].n_times_set; if (find_reg_note (p, REG_RETVAL, NULL_RTX)) m->savings += libcall_benefit (p); for (i = 0; i < LOOP_REGNO_NREGS (regno, SET_DEST (set)); i++) regs->array[regno+i].set_in_loop = move_insn ? -2 : -1; /* Add M to the end of the chain MOVABLES. */ loop_movables_add (movables, m); if (m->consec > 0) { /* It is possible for the first instruction to have a REG_EQUAL note but a non-invariant SET_SRC, so we must remember the status of the first instruction in case the last instruction doesn't have a REG_EQUAL note. */ m->move_insn_first = m->move_insn; /* Skip this insn, not checking REG_LIBCALL notes. */ p = next_nonnote_insn (p); /* Skip the consecutive insns, if there are any. */ p = skip_consec_insns (p, m->consec); /* Back up to the last insn of the consecutive group. */ p = prev_nonnote_insn (p); /* We must now reset m->move_insn, m->is_equiv, and possibly m->set_src to correspond to the effects of all the insns. */ temp = find_reg_note (p, REG_EQUIV, NULL_RTX); if (temp) m->set_src = XEXP (temp, 0), m->move_insn = 1; else { temp = find_reg_note (p, REG_EQUAL, NULL_RTX); if (temp && CONSTANT_P (XEXP (temp, 0))) m->set_src = XEXP (temp, 0), m->move_insn = 1; else m->move_insn = 0; } m->is_equiv = (find_reg_note (p, REG_EQUIV, NULL_RTX) != 0); } } /* If this register is always set within a STRICT_LOW_PART or set to zero, then its high bytes are constant. So clear them outside the loop and within the loop just load the low bytes. We must check that the machine has an instruction to do so. Also, if the value loaded into the register depends on the same register, this cannot be done. */ else if (SET_SRC (set) == const0_rtx && NONJUMP_INSN_P (NEXT_INSN (p)) && (set1 = single_set (NEXT_INSN (p))) && GET_CODE (set1) == SET && (GET_CODE (SET_DEST (set1)) == STRICT_LOW_PART) && (GET_CODE (XEXP (SET_DEST (set1), 0)) == SUBREG) && (SUBREG_REG (XEXP (SET_DEST (set1), 0)) == SET_DEST (set)) && !reg_mentioned_p (SET_DEST (set), SET_SRC (set1))) { int regno = REGNO (SET_DEST (set)); if (regs->array[regno].set_in_loop == 2) { struct movable *m; m = xmalloc (sizeof (struct movable)); m->next = 0; m->insn = p; m->set_dest = SET_DEST (set); m->dependencies = 0; m->force = 0; m->consec = 0; m->done = 0; m->forces = 0; m->move_insn = 0; m->move_insn_first = 0; m->insert_temp = insert_temp; m->partial = 1; /* If the insn may not be executed on some cycles, we can't clear the whole reg; clear just high part. Not even if the reg is used only within this loop. Consider this: while (1) while (s != t) { if (foo ()) x = *s; use (x); } Clearing x before the inner loop could clobber a value being saved from the last time around the outer loop. However, if the reg is not used outside this loop and all uses of the register are in the same basic block as the store, there is no problem. If this insn was made by loop, we don't know its INSN_LUID and hence must make a conservative assumption. */ m->global = (INSN_UID (p) >= max_uid_for_loop || LOOP_REG_GLOBAL_P (loop, regno) || (labels_in_range_p (p, REGNO_FIRST_LUID (regno)))); if (maybe_never && m->global) m->savemode = GET_MODE (SET_SRC (set1)); else m->savemode = VOIDmode; m->regno = regno; m->cond = 0; m->match = 0; m->lifetime = LOOP_REG_LIFETIME (loop, regno); m->savings = 1; for (i = 0; i < LOOP_REGNO_NREGS (regno, SET_DEST (set)); i++) regs->array[regno+i].set_in_loop = -1; /* Add M to the end of the chain MOVABLES. */ loop_movables_add (movables, m); } } } } /* Past a call insn, we get to insns which might not be executed because the call might exit. This matters for insns that trap. Constant and pure call insns always return, so they don't count. */ else if (CALL_P (p) && ! CONST_OR_PURE_CALL_P (p)) call_passed = 1; /* Past a label or a jump, we get to insns for which we can't count on whether or how many times they will be executed during each iteration. Therefore, we can only move out sets of trivial variables (those not used after the loop). */ /* Similar code appears twice in strength_reduce. */ else if ((LABEL_P (p) || JUMP_P (p)) /* If we enter the loop in the middle, and scan around to the beginning, don't set maybe_never for that. This must be an unconditional jump, otherwise the code at the top of the loop might never be executed. Unconditional jumps are followed by a barrier then the loop_end. */ && ! (JUMP_P (p) && JUMP_LABEL (p) == loop->top && NEXT_INSN (NEXT_INSN (p)) == loop_end && any_uncondjump_p (p))) maybe_never = 1; } /* If one movable subsumes another, ignore that other. */ ignore_some_movables (movables); /* For each movable insn, see if the reg that it loads leads when it dies right into another conditionally movable insn. If so, record that the second insn "forces" the first one, since the second can be moved only if the first is. */ force_movables (movables); /* See if there are multiple movable insns that load the same value. If there are, make all but the first point at the first one through the `match' field, and add the priorities of them all together as the priority of the first. */ combine_movables (movables, regs); /* Now consider each movable insn to decide whether it is worth moving. Store 0 in regs->array[I].set_in_loop for each reg I that is moved. For machines with few registers this increases code size, so do not move moveables when optimizing for code size on such machines. (The 18 below is the value for i386.) */ if (!optimize_size || (reg_class_size[GENERAL_REGS] > 18 && !loop_info->has_call)) { move_movables (loop, movables, threshold, insn_count); /* Recalculate regs->array if move_movables has created new registers. */ if (max_reg_num () > regs->num) { loop_regs_scan (loop, 0); for (update_start = loop_start; PREV_INSN (update_start) && !LABEL_P (PREV_INSN (update_start)); update_start = PREV_INSN (update_start)) ; update_end = NEXT_INSN (loop_end); reg_scan_update (update_start, update_end, loop_max_reg); loop_max_reg = max_reg_num (); } } /* Now candidates that still are negative are those not moved. Change regs->array[I].set_in_loop to indicate that those are not actually invariant. */ for (i = 0; i < regs->num; i++) if (regs->array[i].set_in_loop < 0) regs->array[i].set_in_loop = regs->array[i].n_times_set; /* Now that we've moved some things out of the loop, we might be able to hoist even more memory references. */ load_mems (loop); /* Recalculate regs->array if load_mems has created new registers. */ if (max_reg_num () > regs->num) loop_regs_scan (loop, 0); for (update_start = loop_start; PREV_INSN (update_start) && !LABEL_P (PREV_INSN (update_start)); update_start = PREV_INSN (update_start)) ; update_end = NEXT_INSN (loop_end); reg_scan_update (update_start, update_end, loop_max_reg); loop_max_reg = max_reg_num (); if (flag_strength_reduce) { if (update_end && LABEL_P (update_end)) /* Ensure our label doesn't go away. */ LABEL_NUSES (update_end)++; strength_reduce (loop, flags); reg_scan_update (update_start, update_end, loop_max_reg); loop_max_reg = max_reg_num (); if (update_end && LABEL_P (update_end) && --LABEL_NUSES (update_end) == 0) delete_related_insns (update_end); } /* The movable information is required for strength reduction. */ loop_movables_free (movables); free (regs->array); regs->array = 0; regs->num = 0; } /* Add elements to *OUTPUT to record all the pseudo-regs mentioned in IN_THIS but not mentioned in NOT_IN_THIS. */ static void record_excess_regs (rtx in_this, rtx not_in_this, rtx *output) { enum rtx_code code; const char *fmt; int i; code = GET_CODE (in_this); switch (code) { case PC: case CC0: case CONST_INT: case CONST_DOUBLE: case CONST: case SYMBOL_REF: case LABEL_REF: return; case REG: if (REGNO (in_this) >= FIRST_PSEUDO_REGISTER && ! reg_mentioned_p (in_this, not_in_this)) *output = gen_rtx_EXPR_LIST (VOIDmode, in_this, *output); return; default: break; } fmt = GET_RTX_FORMAT (code); for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) { int j; switch (fmt[i]) { case 'E': for (j = 0; j < XVECLEN (in_this, i); j++) record_excess_regs (XVECEXP (in_this, i, j), not_in_this, output); break; case 'e': record_excess_regs (XEXP (in_this, i), not_in_this, output); break; } } } /* Check what regs are referred to in the libcall block ending with INSN, aside from those mentioned in the equivalent value. If there are none, return 0. If there are one or more, return an EXPR_LIST containing all of them. */ static rtx libcall_other_reg (rtx insn, rtx equiv) { rtx note = find_reg_note (insn, REG_RETVAL, NULL_RTX); rtx p = XEXP (note, 0); rtx output = 0; /* First, find all the regs used in the libcall block that are not mentioned as inputs to the result. */ while (p != insn) { if (INSN_P (p)) record_excess_regs (PATTERN (p), equiv, &output); p = NEXT_INSN (p); } return output; } /* Return 1 if all uses of REG are between INSN and the end of the basic block. */ static int reg_in_basic_block_p (rtx insn, rtx reg) { int regno = REGNO (reg); rtx p; if (REGNO_FIRST_UID (regno) != INSN_UID (insn)) return 0; /* Search this basic block for the already recorded last use of the reg. */ for (p = insn; p; p = NEXT_INSN (p)) { switch (GET_CODE (p)) { case NOTE: break; case INSN: case CALL_INSN: /* Ordinary insn: if this is the last use, we win. */ if (REGNO_LAST_UID (regno) == INSN_UID (p)) return 1; break; case JUMP_INSN: /* Jump insn: if this is the last use, we win. */ if (REGNO_LAST_UID (regno) == INSN_UID (p)) return 1; /* Otherwise, it's the end of the basic block, so we lose. */ return 0; case CODE_LABEL: case BARRIER: /* It's the end of the basic block, so we lose. */ return 0; default: break; } } /* The "last use" that was recorded can't be found after the first use. This can happen when the last use was deleted while processing an inner loop, this inner loop was then completely unrolled, and the outer loop is always exited after the inner loop, so that everything after the first use becomes a single basic block. */ return 1; } /* Compute the benefit of eliminating the insns in the block whose last insn is LAST. This may be a group of insns used to compute a value directly or can contain a library call. */ static int libcall_benefit (rtx last) { rtx insn; int benefit = 0; for (insn = XEXP (find_reg_note (last, REG_RETVAL, NULL_RTX), 0); insn != last; insn = NEXT_INSN (insn)) { if (CALL_P (insn)) benefit += 10; /* Assume at least this many insns in a library routine. */ else if (NONJUMP_INSN_P (insn) && GET_CODE (PATTERN (insn)) != USE && GET_CODE (PATTERN (insn)) != CLOBBER) benefit++; } return benefit; } /* Skip COUNT insns from INSN, counting library calls as 1 insn. */ static rtx skip_consec_insns (rtx insn, int count) { for (; count > 0; count--) { rtx temp; /* If first insn of libcall sequence, skip to end. */ /* Do this at start of loop, since INSN is guaranteed to be an insn here. */ if (!NOTE_P (insn) && (temp = find_reg_note (insn, REG_LIBCALL, NULL_RTX))) insn = XEXP (temp, 0); do insn = NEXT_INSN (insn); while (NOTE_P (insn)); } return insn; } /* Ignore any movable whose insn falls within a libcall which is part of another movable. We make use of the fact that the movable for the libcall value was made later and so appears later on the chain. */ static void ignore_some_movables (struct loop_movables *movables) { struct movable *m, *m1; for (m = movables->head; m; m = m->next) { /* Is this a movable for the value of a libcall? */ rtx note = find_reg_note (m->insn, REG_RETVAL, NULL_RTX); if (note) { rtx insn; /* Check for earlier movables inside that range, and mark them invalid. We cannot use LUIDs here because insns created by loop.c for prior loops don't have LUIDs. Rather than reject all such insns from movables, we just explicitly check each insn in the libcall (since invariant libcalls aren't that common). */ for (insn = XEXP (note, 0); insn != m->insn; insn = NEXT_INSN (insn)) for (m1 = movables->head; m1 != m; m1 = m1->next) if (m1->insn == insn) m1->done = 1; } } } /* For each movable insn, see if the reg that it loads leads when it dies right into another conditionally movable insn. If so, record that the second insn "forces" the first one, since the second can be moved only if the first is. */ static void force_movables (struct loop_movables *movables) { struct movable *m, *m1; for (m1 = movables->head; m1; m1 = m1->next) /* Omit this if moving just the (SET (REG) 0) of a zero-extend. */ if (!m1->partial && !m1->done) { int regno = m1->regno; for (m = m1->next; m; m = m->next) /* ??? Could this be a bug? What if CSE caused the register of M1 to be used after this insn? Since CSE does not update regno_last_uid, this insn M->insn might not be where it dies. But very likely this doesn't matter; what matters is that M's reg is computed from M1's reg. */ if (INSN_UID (m->insn) == REGNO_LAST_UID (regno) && !m->done) break; if (m != 0 && m->set_src == m1->set_dest /* If m->consec, m->set_src isn't valid. */ && m->consec == 0) m = 0; /* Increase the priority of the moving the first insn since it permits the second to be moved as well. Likewise for insns already forced by the first insn. */ if (m != 0) { struct movable *m2; m->forces = m1; for (m2 = m1; m2; m2 = m2->forces) { m2->lifetime += m->lifetime; m2->savings += m->savings; } } } } /* Find invariant expressions that are equal and can be combined into one register. */ static void combine_movables (struct loop_movables *movables, struct loop_regs *regs) { struct movable *m; char *matched_regs = xmalloc (regs->num); enum machine_mode mode; /* Regs that are set more than once are not allowed to match or be matched. I'm no longer sure why not. */ /* Only pseudo registers are allowed to match or be matched, since move_movables does not validate the change. */ /* Perhaps testing m->consec_sets would be more appropriate here? */ for (m = movables->head; m; m = m->next) if (m->match == 0 && regs->array[m->regno].n_times_set == 1 && m->regno >= FIRST_PSEUDO_REGISTER && !m->insert_temp && !m->partial) { struct movable *m1; int regno = m->regno; memset (matched_regs, 0, regs->num); matched_regs[regno] = 1; /* We want later insns to match the first one. Don't make the first one match any later ones. So start this loop at m->next. */ for (m1 = m->next; m1; m1 = m1->next) if (m != m1 && m1->match == 0 && !m1->insert_temp && regs->array[m1->regno].n_times_set == 1 && m1->regno >= FIRST_PSEUDO_REGISTER /* A reg used outside the loop mustn't be eliminated. */ && !m1->global /* A reg used for zero-extending mustn't be eliminated. */ && !m1->partial && (matched_regs[m1->regno] || (GET_MODE (m->set_dest) == GET_MODE (m1->set_dest) /* See if the source of M1 says it matches M. */ && ((REG_P (m1->set_src) && matched_regs[REGNO (m1->set_src)]) || rtx_equal_for_loop_p (m->set_src, m1->set_src, movables, regs)))) && ((m->dependencies == m1->dependencies) || rtx_equal_p (m->dependencies, m1->dependencies))) { m->lifetime += m1->lifetime; m->savings += m1->savings; m1->done = 1; m1->match = m; matched_regs[m1->regno] = 1; } } /* Now combine the regs used for zero-extension. This can be done for those not marked `global' provided their lives don't overlap. */ for (mode = GET_CLASS_NARROWEST_MODE (MODE_INT); mode != VOIDmode; mode = GET_MODE_WIDER_MODE (mode)) { struct movable *m0 = 0; /* Combine all the registers for extension from mode MODE. Don't combine any that are used outside this loop. */ for (m = movables->head; m; m = m->next) if (m->partial && ! m->global && mode == GET_MODE (SET_SRC (PATTERN (NEXT_INSN (m->insn))))) { struct movable *m1; int first = REGNO_FIRST_LUID (m->regno); int last = REGNO_LAST_LUID (m->regno); if (m0 == 0) { /* First one: don't check for overlap, just record it. */ m0 = m; continue; } /* Make sure they extend to the same mode. (Almost always true.) */ if (GET_MODE (m->set_dest) != GET_MODE (m0->set_dest)) continue; /* We already have one: check for overlap with those already combined together. */ for (m1 = movables->head; m1 != m; m1 = m1->next) if (m1 == m0 || (m1->partial && m1->match == m0)) if (! (REGNO_FIRST_LUID (m1->regno) > last || REGNO_LAST_LUID (m1->regno) < first)) goto overlap; /* No overlap: we can combine this with the others. */ m0->lifetime += m->lifetime; m0->savings += m->savings; m->done = 1; m->match = m0; overlap: ; } } /* Clean up. */ free (matched_regs); } /* Returns the number of movable instructions in LOOP that were not moved outside the loop. */ static int num_unmoved_movables (const struct loop *loop) { int num = 0; struct movable *m; for (m = LOOP_MOVABLES (loop)->head; m; m = m->next) if (!m->done) ++num; return num; } /* Return 1 if regs X and Y will become the same if moved. */ static int regs_match_p (rtx x, rtx y, struct loop_movables *movables) { unsigned int xn = REGNO (x); unsigned int yn = REGNO (y); struct movable *mx, *my; for (mx = movables->head; mx; mx = mx->next) if (mx->regno == xn) break; for (my = movables->head; my; my = my->next) if (my->regno == yn) break; return (mx && my && ((mx->match == my->match && mx->match != 0) || mx->match == my || mx == my->match)); } /* Return 1 if X and Y are identical-looking rtx's. This is the Lisp function EQUAL for rtx arguments. If two registers are matching movables or a movable register and an equivalent constant, consider them equal. */ static int rtx_equal_for_loop_p (rtx x, rtx y, struct loop_movables *movables, struct loop_regs *regs) { int i; int j; struct movable *m; enum rtx_code code; const char *fmt; if (x == y) return 1; if (x == 0 || y == 0) return 0; code = GET_CODE (x); /* If we have a register and a constant, they may sometimes be equal. */ if (REG_P (x) && regs->array[REGNO (x)].set_in_loop == -2 && CONSTANT_P (y)) { for (m = movables->head; m; m = m->next) if (m->move_insn && m->regno == REGNO (x) && rtx_equal_p (m->set_src, y)) return 1; } else if (REG_P (y) && regs->array[REGNO (y)].set_in_loop == -2 && CONSTANT_P (x)) { for (m = movables->head; m; m = m->next) if (m->move_insn && m->regno == REGNO (y) && rtx_equal_p (m->set_src, x)) return 1; } /* Otherwise, rtx's of different codes cannot be equal. */ if (code != GET_CODE (y)) return 0; /* (MULT:SI x y) and (MULT:HI x y) are NOT equivalent. (REG:SI x) and (REG:HI x) are NOT equivalent. */ if (GET_MODE (x) != GET_MODE (y)) return 0; /* These types of rtx's can be compared nonrecursively. */ switch (code) { case PC: case CC0: case CONST_INT: case CONST_DOUBLE: return 0; case REG: return (REGNO (x) == REGNO (y) || regs_match_p (x, y, movables)); case LABEL_REF: return XEXP (x, 0) == XEXP (y, 0); case SYMBOL_REF: return XSTR (x, 0) == XSTR (y, 0); default: break; } /* Compare the elements. If any pair of corresponding elements fail to match, return 0 for the whole things. */ fmt = GET_RTX_FORMAT (code); for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) { switch (fmt[i]) { case 'w': if (XWINT (x, i) != XWINT (y, i)) return 0; break; case 'i': if (XINT (x, i) != XINT (y, i)) return 0; break; case 'E': /* Two vectors must have the same length. */ if (XVECLEN (x, i) != XVECLEN (y, i)) return 0; /* And the corresponding elements must match. */ for (j = 0; j < XVECLEN (x, i); j++) if (rtx_equal_for_loop_p (XVECEXP (x, i, j), XVECEXP (y, i, j), movables, regs) == 0) return 0; break; case 'e': if (rtx_equal_for_loop_p (XEXP (x, i), XEXP (y, i), movables, regs) == 0) return 0; break; case 's': if (strcmp (XSTR (x, i), XSTR (y, i))) return 0; break; case 'u': /* These are just backpointers, so they don't matter. */ break; case '0': break; /* It is believed that rtx's at this level will never contain anything but integers and other rtx's, except for within LABEL_REFs and SYMBOL_REFs. */ default: gcc_unreachable (); } } return 1; } /* If X contains any LABEL_REF's, add REG_LABEL notes for them to all insns in INSNS which use the reference. LABEL_NUSES for CODE_LABEL references is incremented once for each added note. */ static void add_label_notes (rtx x, rtx insns) { enum rtx_code code = GET_CODE (x); int i, j; const char *fmt; rtx insn; if (code == LABEL_REF && !LABEL_REF_NONLOCAL_P (x)) { /* This code used to ignore labels that referred to dispatch tables to avoid flow generating (slightly) worse code. We no longer ignore such label references (see LABEL_REF handling in mark_jump_label for additional information). */ for (insn = insns; insn; insn = NEXT_INSN (insn)) if (reg_mentioned_p (XEXP (x, 0), insn)) { REG_NOTES (insn) = gen_rtx_INSN_LIST (REG_LABEL, XEXP (x, 0), REG_NOTES (insn)); if (LABEL_P (XEXP (x, 0))) LABEL_NUSES (XEXP (x, 0))++; } } fmt = GET_RTX_FORMAT (code); for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) { if (fmt[i] == 'e') add_label_notes (XEXP (x, i), insns); else if (fmt[i] == 'E') for (j = XVECLEN (x, i) - 1; j >= 0; j--) add_label_notes (XVECEXP (x, i, j), insns); } } /* Scan MOVABLES, and move the insns that deserve to be moved. If two matching movables are combined, replace one reg with the other throughout. */ static void move_movables (struct loop *loop, struct loop_movables *movables, int threshold, int insn_count) { struct loop_regs *regs = LOOP_REGS (loop); int nregs = regs->num; rtx new_start = 0; struct movable *m; rtx p; rtx loop_start = loop->start; rtx loop_end = loop->end; /* Map of pseudo-register replacements to handle combining when we move several insns that load the same value into different pseudo-registers. */ rtx *reg_map = xcalloc (nregs, sizeof (rtx)); char *already_moved = xcalloc (nregs, sizeof (char)); for (m = movables->head; m; m = m->next) { /* Describe this movable insn. */ if (loop_dump_stream) { fprintf (loop_dump_stream, "Insn %d: regno %d (life %d), ", INSN_UID (m->insn), m->regno, m->lifetime); if (m->consec > 0) fprintf (loop_dump_stream, "consec %d, ", m->consec); if (m->cond) fprintf (loop_dump_stream, "cond "); if (m->force) fprintf (loop_dump_stream, "force "); if (m->global) fprintf (loop_dump_stream, "global "); if (m->done) fprintf (loop_dump_stream, "done "); if (m->move_insn) fprintf (loop_dump_stream, "move-insn "); if (m->match) fprintf (loop_dump_stream, "matches %d ", INSN_UID (m->match->insn)); if (m->forces) fprintf (loop_dump_stream, "forces %d ", INSN_UID (m->forces->insn)); } /* Ignore the insn if it's already done (it matched something else). Otherwise, see if it is now safe to move. */ if (!m->done && (! m->cond || (1 == loop_invariant_p (loop, m->set_src) && (m->dependencies == 0 || 1 == loop_invariant_p (loop, m->dependencies)) && (m->consec == 0 || 1 == consec_sets_invariant_p (loop, m->set_dest, m->consec + 1, m->insn)))) && (! m->forces || m->forces->done)) { int regno; rtx p; int savings = m->savings; /* We have an insn that is safe to move. Compute its desirability. */ p = m->insn; regno = m->regno; if (loop_dump_stream) fprintf (loop_dump_stream, "savings %d ", savings); if (regs->array[regno].moved_once && loop_dump_stream) fprintf (loop_dump_stream, "halved since already moved "); /* An insn MUST be moved if we already moved something else which is safe only if this one is moved too: that is, if already_moved[REGNO] is nonzero. */ /* An insn is desirable to move if the new lifetime of the register is no more than THRESHOLD times the old lifetime. If it's not desirable, it means the loop is so big that moving won't speed things up much, and it is liable to make register usage worse. */ /* It is also desirable to move if it can be moved at no extra cost because something else was already moved. */ if (already_moved[regno] || (threshold * savings * m->lifetime) >= (regs->array[regno].moved_once ? insn_count * 2 : insn_count) || (m->forces && m->forces->done && regs->array[m->forces->regno].n_times_set == 1)) { int count; struct movable *m1; rtx first = NULL_RTX; rtx newreg = NULL_RTX; if (m->insert_temp) newreg = gen_reg_rtx (GET_MODE (m->set_dest)); /* Now move the insns that set the reg. */ if (m->partial && m->match) { rtx newpat, i1; rtx r1, r2; /* Find the end of this chain of matching regs. Thus, we load each reg in the chain from that one reg. And that reg is loaded with 0 directly, since it has ->match == 0. */ for (m1 = m; m1->match; m1 = m1->match); newpat = gen_move_insn (SET_DEST (PATTERN (m->insn)), SET_DEST (PATTERN (m1->insn))); i1 = loop_insn_hoist (loop, newpat); /* Mark the moved, invariant reg as being allowed to share a hard reg with the other matching invariant. */ REG_NOTES (i1) = REG_NOTES (m->insn); r1 = SET_DEST (PATTERN (m->insn)); r2 = SET_DEST (PATTERN (m1->insn)); regs_may_share = gen_rtx_EXPR_LIST (VOIDmode, r1, gen_rtx_EXPR_LIST (VOIDmode, r2, regs_may_share)); delete_insn (m->insn); if (new_start == 0) new_start = i1; if (loop_dump_stream) fprintf (loop_dump_stream, " moved to %d", INSN_UID (i1)); } /* If we are to re-generate the item being moved with a new move insn, first delete what we have and then emit the move insn before the loop. */ else if (m->move_insn) { rtx i1, temp, seq; for (count = m->consec; count >= 0; count--) { if (!NOTE_P (p)) { /* If this is the first insn of a library call sequence, something is very wrong. */ gcc_assert (!find_reg_note (p, REG_LIBCALL, NULL_RTX)); /* If this is the last insn of a libcall sequence, then delete every insn in the sequence except the last. The last insn is handled in the normal manner. */ temp = find_reg_note (p, REG_RETVAL, NULL_RTX); if (temp) { temp = XEXP (temp, 0); while (temp != p) temp = delete_insn (temp); } } temp = p; p = delete_insn (p); /* simplify_giv_expr expects that it can walk the insns at m->insn forwards and see this old sequence we are tossing here. delete_insn does preserve the next pointers, but when we skip over a NOTE we must fix it up. Otherwise that code walks into the non-deleted insn stream. */ while (p && NOTE_P (p)) p = NEXT_INSN (temp) = NEXT_INSN (p); if (m->insert_temp) { /* Replace the original insn with a move from our newly created temp. */ start_sequence (); emit_move_insn (m->set_dest, newreg); seq = get_insns (); end_sequence (); emit_insn_before (seq, p); } } start_sequence (); emit_move_insn (m->insert_temp ? newreg : m->set_dest, m->set_src); seq = get_insns (); end_sequence (); add_label_notes (m->set_src, seq); i1 = loop_insn_hoist (loop, seq); if (! find_reg_note (i1, REG_EQUAL, NULL_RTX)) set_unique_reg_note (i1, m->is_equiv ? REG_EQUIV : REG_EQUAL, m->set_src); if (loop_dump_stream) fprintf (loop_dump_stream, " moved to %d", INSN_UID (i1)); /* The more regs we move, the less we like moving them. */ threshold -= 3; } else { for (count = m->consec; count >= 0; count--) { rtx i1, temp; /* If first insn of libcall sequence, skip to end. */ /* Do this at start of loop, since p is guaranteed to be an insn here. */ if (!NOTE_P (p) && (temp = find_reg_note (p, REG_LIBCALL, NULL_RTX))) p = XEXP (temp, 0); /* If last insn of libcall sequence, move all insns except the last before the loop. The last insn is handled in the normal manner. */ if (!NOTE_P (p) && (temp = find_reg_note (p, REG_RETVAL, NULL_RTX))) { rtx fn_address = 0; rtx fn_reg = 0; rtx fn_address_insn = 0; first = 0; for (temp = XEXP (temp, 0); temp != p; temp = NEXT_INSN (temp)) { rtx body; rtx n; rtx next; if (NOTE_P (temp)) continue; body = PATTERN (temp); /* Find the next insn after TEMP, not counting USE or NOTE insns. */ for (next = NEXT_INSN (temp); next != p; next = NEXT_INSN (next)) if (! (NONJUMP_INSN_P (next) && GET_CODE (PATTERN (next)) == USE) && !NOTE_P (next)) break; /* If that is the call, this may be the insn that loads the function address. Extract the function address from the insn that loads it into a register. If this insn was cse'd, we get incorrect code. So emit a new move insn that copies the function address into the register that the call insn will use. flow.c will delete any redundant stores that we have created. */ if (CALL_P (next) && GET_CODE (body) == SET && REG_P (SET_DEST (body)) && (n = find_reg_note (temp, REG_EQUAL, NULL_RTX))) { fn_reg = SET_SRC (body); if (!REG_P (fn_reg)) fn_reg = SET_DEST (body); fn_address = XEXP (n, 0); fn_address_insn = temp; } /* We have the call insn. If it uses the register we suspect it might, load it with the correct address directly. */ if (CALL_P (temp) && fn_address != 0 && reg_referenced_p (fn_reg, body)) loop_insn_emit_after (loop, 0, fn_address_insn, gen_move_insn (fn_reg, fn_address)); if (CALL_P (temp)) { i1 = loop_call_insn_hoist (loop, body); /* Because the USAGE information potentially contains objects other than hard registers we need to copy it. */ if (CALL_INSN_FUNCTION_USAGE (temp)) CALL_INSN_FUNCTION_USAGE (i1) = copy_rtx (CALL_INSN_FUNCTION_USAGE (temp)); } else i1 = loop_insn_hoist (loop, body); if (first == 0) first = i1; if (temp == fn_address_insn) fn_address_insn = i1; REG_NOTES (i1) = REG_NOTES (temp); REG_NOTES (temp) = NULL; delete_insn (temp); } if (new_start == 0) new_start = first; } if (m->savemode != VOIDmode) { /* P sets REG to zero; but we should clear only the bits that are not covered by the mode m->savemode. */ rtx reg = m->set_dest; rtx sequence; rtx tem; start_sequence (); tem = expand_simple_binop (GET_MODE (reg), AND, reg, GEN_INT ((((HOST_WIDE_INT) 1 << GET_MODE_BITSIZE (m->savemode))) - 1), reg, 1, OPTAB_LIB_WIDEN); gcc_assert (tem); if (tem != reg) emit_move_insn (reg, tem); sequence = get_insns (); end_sequence (); i1 = loop_insn_hoist (loop, sequence); } else if (CALL_P (p)) { i1 = loop_call_insn_hoist (loop, PATTERN (p)); /* Because the USAGE information potentially contains objects other than hard registers we need to copy it. */ if (CALL_INSN_FUNCTION_USAGE (p)) CALL_INSN_FUNCTION_USAGE (i1) = copy_rtx (CALL_INSN_FUNCTION_USAGE (p)); } else if (count == m->consec && m->move_insn_first) { rtx seq; /* The SET_SRC might not be invariant, so we must use the REG_EQUAL note. */ start_sequence (); emit_move_insn (m->insert_temp ? newreg : m->set_dest, m->set_src); seq = get_insns (); end_sequence (); add_label_notes (m->set_src, seq); i1 = loop_insn_hoist (loop, seq); if (! find_reg_note (i1, REG_EQUAL, NULL_RTX)) set_unique_reg_note (i1, m->is_equiv ? REG_EQUIV : REG_EQUAL, m->set_src); } else if (m->insert_temp) { rtx *reg_map2 = xcalloc (REGNO (newreg), sizeof(rtx)); reg_map2 [m->regno] = newreg; i1 = loop_insn_hoist (loop, copy_rtx (PATTERN (p))); replace_regs (i1, reg_map2, REGNO (newreg), 1); free (reg_map2); } else i1 = loop_insn_hoist (loop, PATTERN (p)); if (REG_NOTES (i1) == 0) { REG_NOTES (i1) = REG_NOTES (p); REG_NOTES (p) = NULL; /* If there is a REG_EQUAL note present whose value is not loop invariant, then delete it, since it may cause problems with later optimization passes. It is possible for cse to create such notes like this as a result of record_jump_cond. */ if ((temp = find_reg_note (i1, REG_EQUAL, NULL_RTX)) && ! loop_invariant_p (loop, XEXP (temp, 0))) remove_note (i1, temp); } if (new_start == 0) new_start = i1; if (loop_dump_stream) fprintf (loop_dump_stream, " moved to %d", INSN_UID (i1)); /* If library call, now fix the REG_NOTES that contain insn pointers, namely REG_LIBCALL on FIRST and REG_RETVAL on I1. */ if ((temp = find_reg_note (i1, REG_RETVAL, NULL_RTX))) { XEXP (temp, 0) = first; temp = find_reg_note (first, REG_LIBCALL, NULL_RTX); XEXP (temp, 0) = i1; } temp = p; delete_insn (p); p = NEXT_INSN (p); /* simplify_giv_expr expects that it can walk the insns at m->insn forwards and see this old sequence we are tossing here. delete_insn does preserve the next pointers, but when we skip over a NOTE we must fix it up. Otherwise that code walks into the non-deleted insn stream. */ while (p && NOTE_P (p)) p = NEXT_INSN (temp) = NEXT_INSN (p); if (m->insert_temp) { rtx seq; /* Replace the original insn with a move from our newly created temp. */ start_sequence (); emit_move_insn (m->set_dest, newreg); seq = get_insns (); end_sequence (); emit_insn_before (seq, p); } } /* The more regs we move, the less we like moving them. */ threshold -= 3; } m->done = 1; if (!m->insert_temp) { /* Any other movable that loads the same register MUST be moved. */ already_moved[regno] = 1; /* This reg has been moved out of one loop. */ regs->array[regno].moved_once = 1; /* The reg set here is now invariant. */ if (! m->partial) { int i; for (i = 0; i < LOOP_REGNO_NREGS (regno, m->set_dest); i++) regs->array[regno+i].set_in_loop = 0; } /* Change the length-of-life info for the register to say it lives at least the full length of this loop. This will help guide optimizations in outer loops. */ if (REGNO_FIRST_LUID (regno) > INSN_LUID (loop_start)) /* This is the old insn before all the moved insns. We can't use the moved insn because it is out of range in uid_luid. Only the old insns have luids. */ REGNO_FIRST_UID (regno) = INSN_UID (loop_start); if (REGNO_LAST_LUID (regno) < INSN_LUID (loop_end)) REGNO_LAST_UID (regno) = INSN_UID (loop_end); } /* Combine with this moved insn any other matching movables. */ if (! m->partial) for (m1 = movables->head; m1; m1 = m1->next) if (m1->match == m) { rtx temp; reg_map[m1->regno] = m->set_dest; /* Get rid of the matching insn and prevent further processing of it. */ m1->done = 1; /* If library call, delete all insns. */ if ((temp = find_reg_note (m1->insn, REG_RETVAL, NULL_RTX))) delete_insn_chain (XEXP (temp, 0), m1->insn); else delete_insn (m1->insn); /* Any other movable that loads the same register MUST be moved. */ already_moved[m1->regno] = 1; /* The reg merged here is now invariant, if the reg it matches is invariant. */ if (! m->partial) { int i; for (i = 0; i < LOOP_REGNO_NREGS (regno, m1->set_dest); i++) regs->array[m1->regno+i].set_in_loop = 0; } } } else if (loop_dump_stream) fprintf (loop_dump_stream, "not desirable"); } else if (loop_dump_stream && !m->match) fprintf (loop_dump_stream, "not safe"); if (loop_dump_stream) fprintf (loop_dump_stream, "\n"); } if (new_start == 0) new_start = loop_start; /* Go through all the instructions in the loop, making all the register substitutions scheduled in REG_MAP. */ for (p = new_start; p != loop_end; p = NEXT_INSN (p)) if (INSN_P (p)) { replace_regs (PATTERN (p), reg_map, nregs, 0); replace_regs (REG_NOTES (p), reg_map, nregs, 0); INSN_CODE (p) = -1; } /* Clean up. */ free (reg_map); free (already_moved); } static void loop_movables_add (struct loop_movables *movables, struct movable *m) { if (movables->head == 0) movables->head = m; else movables->last->next = m; movables->last = m; } static void loop_movables_free (struct loop_movables *movables) { struct movable *m; struct movable *m_next; for (m = movables->head; m; m = m_next) { m_next = m->next; free (m); } } #if 0 /* Scan X and replace the address of any MEM in it with ADDR. REG is the address that MEM should have before the replacement. */ static void replace_call_address (rtx x, rtx reg, rtx addr) { enum rtx_code code; int i; const char *fmt; if (x == 0) return; code = GET_CODE (x); switch (code) { case PC: case CC0: case CONST_INT: case CONST_DOUBLE: case CONST: case SYMBOL_REF: case LABEL_REF: case REG: return; case SET: /* Short cut for very common case. */ replace_call_address (XEXP (x, 1), reg, addr); return; case CALL: /* Short cut for very common case. */ replace_call_address (XEXP (x, 0), reg, addr); return; case MEM: /* If this MEM uses a reg other than the one we expected, something is wrong. */ gcc_assert (XEXP (x, 0) == reg); XEXP (x, 0) = addr; return; default: break; } fmt = GET_RTX_FORMAT (code); for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) { if (fmt[i] == 'e') replace_call_address (XEXP (x, i), reg, addr); else if (fmt[i] == 'E') { int j; for (j = 0; j < XVECLEN (x, i); j++) replace_call_address (XVECEXP (x, i, j), reg, addr); } } } #endif /* Return the number of memory refs to addresses that vary in the rtx X. */ static int count_nonfixed_reads (const struct loop *loop, rtx x) { enum rtx_code code; int i; const char *fmt; int value; if (x == 0) return 0; code = GET_CODE (x); switch (code) { case PC: case CC0: case CONST_INT: case CONST_DOUBLE: case CONST: case SYMBOL_REF: case LABEL_REF: case REG: return 0; case MEM: return ((loop_invariant_p (loop, XEXP (x, 0)) != 1) + count_nonfixed_reads (loop, XEXP (x, 0))); default: break; } value = 0; fmt = GET_RTX_FORMAT (code); for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) { if (fmt[i] == 'e') value += count_nonfixed_reads (loop, XEXP (x, i)); if (fmt[i] == 'E') { int j; for (j = 0; j < XVECLEN (x, i); j++) value += count_nonfixed_reads (loop, XVECEXP (x, i, j)); } } return value; } /* Scan a loop setting the elements `loops_enclosed', `has_call', `has_nonconst_call', `has_volatile', `has_tablejump', `unknown_address_altered', `unknown_constant_address_altered', and `num_mem_sets' in LOOP. Also, fill in the array `mems' and the list `store_mems' in LOOP. */ static void prescan_loop (struct loop *loop) { int level = 1; rtx insn; struct loop_info *loop_info = LOOP_INFO (loop); rtx start = loop->start; rtx end = loop->end; /* The label after END. Jumping here is just like falling off the end of the loop. We use next_nonnote_insn instead of next_label as a hedge against the (pathological) case where some actual insn might end up between the two. */ rtx exit_target = next_nonnote_insn (end); loop_info->has_indirect_jump = indirect_jump_in_function; loop_info->pre_header_has_call = 0; loop_info->has_call = 0; loop_info->has_nonconst_call = 0; loop_info->has_prefetch = 0; loop_info->has_volatile = 0; loop_info->has_tablejump = 0; loop_info->has_multiple_exit_targets = 0; loop->level = 1; loop_info->unknown_address_altered = 0; loop_info->unknown_constant_address_altered = 0; loop_info->store_mems = NULL_RTX; loop_info->first_loop_store_insn = NULL_RTX; loop_info->mems_idx = 0; loop_info->num_mem_sets = 0; for (insn = start; insn && !LABEL_P (insn); insn = PREV_INSN (insn)) { if (CALL_P (insn)) { loop_info->pre_header_has_call = 1; break; } } for (insn = NEXT_INSN (start); insn != NEXT_INSN (end); insn = NEXT_INSN (insn)) { switch (GET_CODE (insn)) { case NOTE: if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_BEG) { ++level; /* Count number of loops contained in this one. */ loop->level++; } else if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_END) --level; break; case CALL_INSN: if (! CONST_OR_PURE_CALL_P (insn)) { loop_info->unknown_address_altered = 1; loop_info->has_nonconst_call = 1; } else if (pure_call_p (insn)) loop_info->has_nonconst_call = 1; loop_info->has_call = 1; if (can_throw_internal (insn)) loop_info->has_multiple_exit_targets = 1; break; case JUMP_INSN: if (! loop_info->has_multiple_exit_targets) { rtx set = pc_set (insn); if (set) { rtx src = SET_SRC (set); rtx label1, label2; if (GET_CODE (src) == IF_THEN_ELSE) { label1 = XEXP (src, 1); label2 = XEXP (src, 2); } else { label1 = src; label2 = NULL_RTX; } do { if (label1 && label1 != pc_rtx) { if (GET_CODE (label1) != LABEL_REF) { /* Something tricky. */ loop_info->has_multiple_exit_targets = 1; break; } else if (XEXP (label1, 0) != exit_target && LABEL_OUTSIDE_LOOP_P (label1)) { /* A jump outside the current loop. */ loop_info->has_multiple_exit_targets = 1; break; } } label1 = label2; label2 = NULL_RTX; } while (label1); } else { /* A return, or something tricky. */ loop_info->has_multiple_exit_targets = 1; } } /* Fall through. */ case INSN: if (volatile_refs_p (PATTERN (insn))) loop_info->has_volatile = 1; if (JUMP_P (insn) && (GET_CODE (PATTERN (insn)) == ADDR_DIFF_VEC || GET_CODE (PATTERN (insn)) == ADDR_VEC)) loop_info->has_tablejump = 1; note_stores (PATTERN (insn), note_addr_stored, loop_info); if (! loop_info->first_loop_store_insn && loop_info->store_mems) loop_info->first_loop_store_insn = insn; if (flag_non_call_exceptions && can_throw_internal (insn)) loop_info->has_multiple_exit_targets = 1; break; default: break; } } /* Now, rescan the loop, setting up the LOOP_MEMS array. */ if (/* An exception thrown by a called function might land us anywhere. */ ! loop_info->has_nonconst_call /* We don't want loads for MEMs moved to a location before the one at which their stack memory becomes allocated. (Note that this is not a problem for malloc, etc., since those require actual function calls. */ && ! current_function_calls_alloca /* There are ways to leave the loop other than falling off the end. */ && ! loop_info->has_multiple_exit_targets) for (insn = NEXT_INSN (start); insn != NEXT_INSN (end); insn = NEXT_INSN (insn)) for_each_rtx (&insn, insert_loop_mem, loop_info); /* BLKmode MEMs are added to LOOP_STORE_MEM as necessary so that loop_invariant_p and load_mems can use true_dependence to determine what is really clobbered. */ if (loop_info->unknown_address_altered) { rtx mem = gen_rtx_MEM (BLKmode, const0_rtx); loop_info->store_mems = gen_rtx_EXPR_LIST (VOIDmode, mem, loop_info->store_mems); } if (loop_info->unknown_constant_address_altered) { rtx mem = gen_rtx_MEM (BLKmode, const0_rtx); MEM_READONLY_P (mem) = 1; loop_info->store_mems = gen_rtx_EXPR_LIST (VOIDmode, mem, loop_info->store_mems); } } /* Invalidate all loops containing LABEL. */ static void invalidate_loops_containing_label (rtx label) { struct loop *loop; for (loop = uid_loop[INSN_UID (label)]; loop; loop = loop->outer) loop->invalid = 1; } /* Scan the function looking for loops. Record the start and end of each loop. Also mark as invalid loops any loops that contain a setjmp or are branched to from outside the loop. */ static void find_and_verify_loops (rtx f, struct loops *loops) { rtx insn; rtx label; int num_loops; struct loop *current_loop; struct loop *next_loop; struct loop *loop; num_loops = loops->num; compute_luids (f, NULL_RTX, 0); /* If there are jumps to undefined labels, treat them as jumps out of any/all loops. This also avoids writing past end of tables when there are no loops. */ uid_loop[0] = NULL; /* Find boundaries of loops, mark which loops are contained within loops, and invalidate loops that have setjmp. */ num_loops = 0; current_loop = NULL; for (insn = f; insn; insn = NEXT_INSN (insn)) { if (NOTE_P (insn)) switch (NOTE_LINE_NUMBER (insn)) { case NOTE_INSN_LOOP_BEG: next_loop = loops->array + num_loops; next_loop->num = num_loops; num_loops++; next_loop->start = insn; next_loop->outer = current_loop; current_loop = next_loop; break; case NOTE_INSN_LOOP_END: gcc_assert (current_loop); current_loop->end = insn; current_loop = current_loop->outer; break; default: break; } if (CALL_P (insn) && find_reg_note (insn, REG_SETJMP, NULL)) { /* In this case, we must invalidate our current loop and any enclosing loop. */ for (loop = current_loop; loop; loop = loop->outer) { loop->invalid = 1; if (loop_dump_stream) fprintf (loop_dump_stream, "\nLoop at %d ignored due to setjmp.\n", INSN_UID (loop->start)); } } /* Note that this will mark the NOTE_INSN_LOOP_END note as being in the enclosing loop, but this doesn't matter. */ uid_loop[INSN_UID (insn)] = current_loop; } /* Any loop containing a label used in an initializer must be invalidated, because it can be jumped into from anywhere. */ for (label = forced_labels; label; label = XEXP (label, 1)) invalidate_loops_containing_label (XEXP (label, 0)); /* Any loop containing a label used for an exception handler must be invalidated, because it can be jumped into from anywhere. */ for_each_eh_label (invalidate_loops_containing_label); /* Now scan all insn's in the function. If any JUMP_INSN branches into a loop that it is not contained within, that loop is marked invalid. If any INSN or CALL_INSN uses a label's address, then the loop containing that label is marked invalid, because it could be jumped into from anywhere. Also look for blocks of code ending in an unconditional branch that exits the loop. If such a block is surrounded by a conditional branch around the block, move the block elsewhere (see below) and invert the jump to point to the code block. This may eliminate a label in our loop and will simplify processing by both us and a possible second cse pass. */ for (insn = f; insn; insn = NEXT_INSN (insn)) if (INSN_P (insn)) { struct loop *this_loop = uid_loop[INSN_UID (insn)]; if (NONJUMP_INSN_P (insn) || CALL_P (insn)) { rtx note = find_reg_note (insn, REG_LABEL, NULL_RTX); if (note) invalidate_loops_containing_label (XEXP (note, 0)); } if (!JUMP_P (insn)) continue; mark_loop_jump (PATTERN (insn), this_loop); /* See if this is an unconditional branch outside the loop. */ if (this_loop && (GET_CODE (PATTERN (insn)) == RETURN || (any_uncondjump_p (insn) && onlyjump_p (insn) && (uid_loop[INSN_UID (JUMP_LABEL (insn))] != this_loop))) && get_max_uid () < max_uid_for_loop) { rtx p; rtx our_next = next_real_insn (insn); rtx last_insn_to_move = NEXT_INSN (insn); struct loop *dest_loop; struct loop *outer_loop = NULL; /* Go backwards until we reach the start of the loop, a label, or a JUMP_INSN. */ for (p = PREV_INSN (insn); !LABEL_P (p) && ! (NOTE_P (p) && NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_BEG) && !JUMP_P (p); p = PREV_INSN (p)) ; /* Check for the case where we have a jump to an inner nested loop, and do not perform the optimization in that case. */ if (JUMP_LABEL (insn)) { dest_loop = uid_loop[INSN_UID (JUMP_LABEL (insn))]; if (dest_loop) { for (outer_loop = dest_loop; outer_loop; outer_loop = outer_loop->outer) if (outer_loop == this_loop) break; } } /* Make sure that the target of P is within the current loop. */ if (JUMP_P (p) && JUMP_LABEL (p) && uid_loop[INSN_UID (JUMP_LABEL (p))] != this_loop) outer_loop = this_loop; /* If we stopped on a JUMP_INSN to the next insn after INSN, we have a block of code to try to move. We look backward and then forward from the target of INSN to find a BARRIER at the same loop depth as the target. If we find such a BARRIER, we make a new label for the start of the block, invert the jump in P and point it to that label, and move the block of code to the spot we found. */ if (! outer_loop && JUMP_P (p) && JUMP_LABEL (p) != 0 /* Just ignore jumps to labels that were never emitted. These always indicate compilation errors. */ && INSN_UID (JUMP_LABEL (p)) != 0 && any_condjump_p (p) && onlyjump_p (p) && next_real_insn (JUMP_LABEL (p)) == our_next /* If it's not safe to move the sequence, then we mustn't try. */ && insns_safe_to_move_p (p, NEXT_INSN (insn), &last_insn_to_move)) { rtx target = JUMP_LABEL (insn) ? JUMP_LABEL (insn) : get_last_insn (); struct loop *target_loop = uid_loop[INSN_UID (target)]; rtx loc, loc2; rtx tmp; /* Search for possible garbage past the conditional jumps and look for the last barrier. */ for (tmp = last_insn_to_move; tmp && !LABEL_P (tmp); tmp = NEXT_INSN (tmp)) if (BARRIER_P (tmp)) last_insn_to_move = tmp; for (loc = target; loc; loc = PREV_INSN (loc)) if (BARRIER_P (loc) /* Don't move things inside a tablejump. */ && ((loc2 = next_nonnote_insn (loc)) == 0 || !LABEL_P (loc2) || (loc2 = next_nonnote_insn (loc2)) == 0 || !JUMP_P (loc2) || (GET_CODE (PATTERN (loc2)) != ADDR_VEC && GET_CODE (PATTERN (loc2)) != ADDR_DIFF_VEC)) && uid_loop[INSN_UID (loc)] == target_loop) break; if (loc == 0) for (loc = target; loc; loc = NEXT_INSN (loc)) if (BARRIER_P (loc) /* Don't move things inside a tablejump. */ && ((loc2 = next_nonnote_insn (loc)) == 0 || !LABEL_P (loc2) || (loc2 = next_nonnote_insn (loc2)) == 0 || !JUMP_P (loc2) || (GET_CODE (PATTERN (loc2)) != ADDR_VEC && GET_CODE (PATTERN (loc2)) != ADDR_DIFF_VEC)) && uid_loop[INSN_UID (loc)] == target_loop) break; if (loc) { rtx cond_label = JUMP_LABEL (p); rtx new_label = get_label_after (p); /* Ensure our label doesn't go away. */ LABEL_NUSES (cond_label)++; /* Verify that uid_loop is large enough and that we can invert P. */ if (invert_jump (p, new_label, 1)) { rtx q, r; bool only_notes; /* If no suitable BARRIER was found, create a suitable one before TARGET. Since TARGET is a fall through path, we'll need to insert a jump around our block and add a BARRIER before TARGET. This creates an extra unconditional jump outside the loop. However, the benefits of removing rarely executed instructions from inside the loop usually outweighs the cost of the extra unconditional jump outside the loop. */ if (loc == 0) { rtx temp; temp = gen_jump (JUMP_LABEL (insn)); temp = emit_jump_insn_before (temp, target); JUMP_LABEL (temp) = JUMP_LABEL (insn); LABEL_NUSES (JUMP_LABEL (insn))++; loc = emit_barrier_before (target); } /* Include the BARRIER after INSN and copy the block after LOC. */ only_notes = squeeze_notes (&new_label, &last_insn_to_move); gcc_assert (!only_notes); reorder_insns (new_label, last_insn_to_move, loc); /* All those insns are now in TARGET_LOOP. */ for (q = new_label; q != NEXT_INSN (last_insn_to_move); q = NEXT_INSN (q)) uid_loop[INSN_UID (q)] = target_loop; /* The label jumped to by INSN is no longer a loop exit. Unless INSN does not have a label (e.g., it is a RETURN insn), search loop->exit_labels to find its label_ref, and remove it. Also turn off LABEL_OUTSIDE_LOOP_P bit. */ if (JUMP_LABEL (insn)) { for (q = 0, r = this_loop->exit_labels; r; q = r, r = LABEL_NEXTREF (r)) if (XEXP (r, 0) == JUMP_LABEL (insn)) { LABEL_OUTSIDE_LOOP_P (r) = 0; if (q) LABEL_NEXTREF (q) = LABEL_NEXTREF (r); else this_loop->exit_labels = LABEL_NEXTREF (r); break; } for (loop = this_loop; loop && loop != target_loop; loop = loop->outer) loop->exit_count--; /* If we didn't find it, then something is wrong. */ gcc_assert (r); } /* P is now a jump outside the loop, so it must be put in loop->exit_labels, and marked as such. The easiest way to do this is to just call mark_loop_jump again for P. */ mark_loop_jump (PATTERN (p), this_loop); /* If INSN now jumps to the insn after it, delete INSN. */ if (JUMP_LABEL (insn) != 0 && (next_real_insn (JUMP_LABEL (insn)) == next_real_insn (insn))) delete_related_insns (insn); } /* Continue the loop after where the conditional branch used to jump, since the only branch insn in the block (if it still remains) is an inter-loop branch and hence needs no processing. */ insn = NEXT_INSN (cond_label); if (--LABEL_NUSES (cond_label) == 0) delete_related_insns (cond_label); /* This loop will be continued with NEXT_INSN (insn). */ insn = PREV_INSN (insn); } } } } } /* If any label in X jumps to a loop different from LOOP_NUM and any of the loops it is contained in, mark the target loop invalid. For speed, we assume that X is part of a pattern of a JUMP_INSN. */ static void mark_loop_jump (rtx x, struct loop *loop) { struct loop *dest_loop; struct loop *outer_loop; int i; switch (GET_CODE (x)) { case PC: case USE: case CLOBBER: case REG: case MEM: case CONST_INT: case CONST_DOUBLE: case RETURN: return; case CONST: /* There could be a label reference in here. */ mark_loop_jump (XEXP (x, 0), loop); return; case PLUS: case MINUS: case MULT: mark_loop_jump (XEXP (x, 0), loop); mark_loop_jump (XEXP (x, 1), loop); return; case LO_SUM: /* This may refer to a LABEL_REF or SYMBOL_REF. */ mark_loop_jump (XEXP (x, 1), loop); return; case SIGN_EXTEND: case ZERO_EXTEND: mark_loop_jump (XEXP (x, 0), loop); return; case LABEL_REF: dest_loop = uid_loop[INSN_UID (XEXP (x, 0))]; /* Link together all labels that branch outside the loop. This is used by final_[bg]iv_value and the loop unrolling code. Also mark this LABEL_REF so we know that this branch should predict false. */ /* A check to make sure the label is not in an inner nested loop, since this does not count as a loop exit. */ if (dest_loop) { for (outer_loop = dest_loop; outer_loop; outer_loop = outer_loop->outer) if (outer_loop == loop) break; } else outer_loop = NULL; if (loop && ! outer_loop) { LABEL_OUTSIDE_LOOP_P (x) = 1; LABEL_NEXTREF (x) = loop->exit_labels; loop->exit_labels = x; for (outer_loop = loop; outer_loop && outer_loop != dest_loop; outer_loop = outer_loop->outer) outer_loop->exit_count++; } /* If this is inside a loop, but not in the current loop or one enclosed by it, it invalidates at least one loop. */ if (! dest_loop) return; /* We must invalidate every nested loop containing the target of this label, except those that also contain the jump insn. */ for (; dest_loop; dest_loop = dest_loop->outer) { /* Stop when we reach a loop that also contains the jump insn. */ for (outer_loop = loop; outer_loop; outer_loop = outer_loop->outer) if (dest_loop == outer_loop) return; /* If we get here, we know we need to invalidate a loop. */ if (loop_dump_stream && ! dest_loop->invalid) fprintf (loop_dump_stream, "\nLoop at %d ignored due to multiple entry points.\n", INSN_UID (dest_loop->start)); dest_loop->invalid = 1; } return; case SET: /* If this is not setting pc, ignore. */ if (SET_DEST (x) == pc_rtx) mark_loop_jump (SET_SRC (x), loop); return; case IF_THEN_ELSE: mark_loop_jump (XEXP (x, 1), loop); mark_loop_jump (XEXP (x, 2), loop); return; case PARALLEL: case ADDR_VEC: for (i = 0; i < XVECLEN (x, 0); i++) mark_loop_jump (XVECEXP (x, 0, i), loop); return; case ADDR_DIFF_VEC: for (i = 0; i < XVECLEN (x, 1); i++) mark_loop_jump (XVECEXP (x, 1, i), loop); return; default: /* Strictly speaking this is not a jump into the loop, only a possible jump out of the loop. However, we have no way to link the destination of this jump onto the list of exit labels. To be safe we mark this loop and any containing loops as invalid. */ if (loop) { for (outer_loop = loop; outer_loop; outer_loop = outer_loop->outer) { if (loop_dump_stream && ! outer_loop->invalid) fprintf (loop_dump_stream, "\nLoop at %d ignored due to unknown exit jump.\n", INSN_UID (outer_loop->start)); outer_loop->invalid = 1; } } return; } } /* Return nonzero if there is a label in the range from insn INSN to and including the insn whose luid is END INSN must have an assigned luid (i.e., it must not have been previously created by loop.c). */ static int labels_in_range_p (rtx insn, int end) { while (insn && INSN_LUID (insn) <= end) { if (LABEL_P (insn)) return 1; insn = NEXT_INSN (insn); } return 0; } /* Record that a memory reference X is being set. */ static void note_addr_stored (rtx x, rtx y ATTRIBUTE_UNUSED, void *data ATTRIBUTE_UNUSED) { struct loop_info *loop_info = data; if (x == 0 || !MEM_P (x)) return; /* Count number of memory writes. This affects heuristics in strength_reduce. */ loop_info->num_mem_sets++; /* BLKmode MEM means all memory is clobbered. */ if (GET_MODE (x) == BLKmode) { if (MEM_READONLY_P (x)) loop_info->unknown_constant_address_altered = 1; else loop_info->unknown_address_altered = 1; return; } loop_info->store_mems = gen_rtx_EXPR_LIST (VOIDmode, x, loop_info->store_mems); } /* X is a value modified by an INSN that references a biv inside a loop exit test (i.e., X is somehow related to the value of the biv). If X is a pseudo that is used more than once, then the biv is (effectively) used more than once. DATA is a pointer to a loop_regs structure. */ static void note_set_pseudo_multiple_uses (rtx x, rtx y ATTRIBUTE_UNUSED, void *data) { struct loop_regs *regs = (struct loop_regs *) data; if (x == 0) return; while (GET_CODE (x) == STRICT_LOW_PART || GET_CODE (x) == SIGN_EXTRACT || GET_CODE (x) == ZERO_EXTRACT || GET_CODE (x) == SUBREG) x = XEXP (x, 0); if (!REG_P (x) || REGNO (x) < FIRST_PSEUDO_REGISTER) return; /* If we do not have usage information, or if we know the register is used more than once, note that fact for check_dbra_loop. */ if (REGNO (x) >= max_reg_before_loop || ! regs->array[REGNO (x)].single_usage || regs->array[REGNO (x)].single_usage == const0_rtx) regs->multiple_uses = 1; } /* Return nonzero if the rtx X is invariant over the current loop. The value is 2 if we refer to something only conditionally invariant. A memory ref is invariant if it is not volatile and does not conflict with anything stored in `loop_info->store_mems'. */ static int loop_invariant_p (const struct loop *loop, rtx x) { struct loop_info *loop_info = LOOP_INFO (loop); struct loop_regs *regs = LOOP_REGS (loop); int i; enum rtx_code code; const char *fmt; int conditional = 0; rtx mem_list_entry; if (x == 0) return 1; code = GET_CODE (x); switch (code) { case CONST_INT: case CONST_DOUBLE: case SYMBOL_REF: case CONST: return 1; case LABEL_REF: return 1; case PC: case CC0: case UNSPEC_VOLATILE: return 0; case REG: if ((x == frame_pointer_rtx || x == hard_frame_pointer_rtx || x == arg_pointer_rtx || x == pic_offset_table_rtx) && ! current_function_has_nonlocal_goto) return 1; if (LOOP_INFO (loop)->has_call && REGNO (x) < FIRST_PSEUDO_REGISTER && call_used_regs[REGNO (x)]) return 0; /* Out-of-range regs can occur when we are called from unrolling. These registers created by the unroller are set in the loop, hence are never invariant. Other out-of-range regs can be generated by load_mems; those that are written to in the loop are not invariant, while those that are not written to are invariant. It would be easy for load_mems to set n_times_set correctly for these registers, however, there is no easy way to distinguish them from registers created by the unroller. */ if (REGNO (x) >= (unsigned) regs->num) return 0; if (regs->array[REGNO (x)].set_in_loop < 0) return 2; return regs->array[REGNO (x)].set_in_loop == 0; case MEM: /* Volatile memory references must be rejected. Do this before checking for read-only items, so that volatile read-only items will be rejected also. */ if (MEM_VOLATILE_P (x)) return 0; /* See if there is any dependence between a store and this load. */ mem_list_entry = loop_info->store_mems; while (mem_list_entry) { if (true_dependence (XEXP (mem_list_entry, 0), VOIDmode, x, rtx_varies_p)) return 0; mem_list_entry = XEXP (mem_list_entry, 1); } /* It's not invalidated by a store in memory but we must still verify the address is invariant. */ break; case ASM_OPERANDS: /* Don't mess with insns declared volatile. */ if (MEM_VOLATILE_P (x)) return 0; break; default: break; } fmt = GET_RTX_FORMAT (code); for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) { if (fmt[i] == 'e') { int tem = loop_invariant_p (loop, XEXP (x, i)); if (tem == 0) return 0; if (tem == 2) conditional = 1; } else if (fmt[i] == 'E') { int j; for (j = 0; j < XVECLEN (x, i); j++) { int tem = loop_invariant_p (loop, XVECEXP (x, i, j)); if (tem == 0) return 0; if (tem == 2) conditional = 1; } } } return 1 + conditional; } /* Return nonzero if all the insns in the loop that set REG are INSN and the immediately following insns, and if each of those insns sets REG in an invariant way (not counting uses of REG in them). The value is 2 if some of these insns are only conditionally invariant. We assume that INSN itself is the first set of REG and that its source is invariant. */ static int consec_sets_invariant_p (const struct loop *loop, rtx reg, int n_sets, rtx insn) { struct loop_regs *regs = LOOP_REGS (loop); rtx p = insn; unsigned int regno = REGNO (reg); rtx temp; /* Number of sets we have to insist on finding after INSN. */ int count = n_sets - 1; int old = regs->array[regno].set_in_loop; int value = 0; int this; /* If N_SETS hit the limit, we can't rely on its value. */ if (n_sets == 127) return 0; regs->array[regno].set_in_loop = 0; while (count > 0) { enum rtx_code code; rtx set; p = NEXT_INSN (p); code = GET_CODE (p); /* If library call, skip to end of it. */ if (code == INSN && (temp = find_reg_note (p, REG_LIBCALL, NULL_RTX))) p = XEXP (temp, 0); this = 0; if (code == INSN && (set = single_set (p)) && REG_P (SET_DEST (set)) && REGNO (SET_DEST (set)) == regno) { this = loop_invariant_p (loop, SET_SRC (set)); if (this != 0) value |= this; else if ((temp = find_reg_note (p, REG_EQUAL, NULL_RTX))) { /* If this is a libcall, then any invariant REG_EQUAL note is OK. If this is an ordinary insn, then only CONSTANT_P REG_EQUAL notes are OK. */ this = (CONSTANT_P (XEXP (temp, 0)) || (find_reg_note (p, REG_RETVAL, NULL_RTX) && loop_invariant_p (loop, XEXP (temp, 0)))); if (this != 0) value |= this; } } if (this != 0) count--; else if (code != NOTE) { regs->array[regno].set_in_loop = old; return 0; } } regs->array[regno].set_in_loop = old; /* If loop_invariant_p ever returned 2, we return 2. */ return 1 + (value & 2); } /* Look at all uses (not sets) of registers in X. For each, if it is the single use, set USAGE[REGNO] to INSN; if there was a previous use in a different insn, set USAGE[REGNO] to const0_rtx. */ static void find_single_use_in_loop (struct loop_regs *regs, rtx insn, rtx x) { enum rtx_code code = GET_CODE (x); const char *fmt = GET_RTX_FORMAT (code); int i, j; if (code == REG) regs->array[REGNO (x)].single_usage = (regs->array[REGNO (x)].single_usage != 0 && regs->array[REGNO (x)].single_usage != insn) ? const0_rtx : insn; else if (code == SET) { /* Don't count SET_DEST if it is a REG; otherwise count things in SET_DEST because if a register is partially modified, it won't show up as a potential movable so we don't care how USAGE is set for it. */ if (!REG_P (SET_DEST (x))) find_single_use_in_loop (regs, insn, SET_DEST (x)); find_single_use_in_loop (regs, insn, SET_SRC (x)); } else for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) { if (fmt[i] == 'e' && XEXP (x, i) != 0) find_single_use_in_loop (regs, insn, XEXP (x, i)); else if (fmt[i] == 'E') for (j = XVECLEN (x, i) - 1; j >= 0; j--) find_single_use_in_loop (regs, insn, XVECEXP (x, i, j)); } } /* Count and record any set in X which is contained in INSN. Update REGS->array[I].MAY_NOT_OPTIMIZE and LAST_SET for any register I set in X. */ static void count_one_set (struct loop_regs *regs, rtx insn, rtx x, rtx *last_set) { if (GET_CODE (x) == CLOBBER && REG_P (XEXP (x, 0))) /* Don't move a reg that has an explicit clobber. It's not worth the pain to try to do it correctly. */ regs->array[REGNO (XEXP (x, 0))].may_not_optimize = 1; if (GET_CODE (x) == SET || GET_CODE (x) == CLOBBER) { rtx dest = SET_DEST (x); while (GET_CODE (dest) == SUBREG || GET_CODE (dest) == ZERO_EXTRACT || GET_CODE (dest) == STRICT_LOW_PART) dest = XEXP (dest, 0); if (REG_P (dest)) { int i; int regno = REGNO (dest); for (i = 0; i < LOOP_REGNO_NREGS (regno, dest); i++) { /* If this is the first setting of this reg in current basic block, and it was set before, it must be set in two basic blocks, so it cannot be moved out of the loop. */ if (regs->array[regno].set_in_loop > 0 && last_set[regno] == 0) regs->array[regno+i].may_not_optimize = 1; /* If this is not first setting in current basic block, see if reg was used in between previous one and this. If so, neither one can be moved. */ if (last_set[regno] != 0 && reg_used_between_p (dest, last_set[regno], insn)) regs->array[regno+i].may_not_optimize = 1; if (regs->array[regno+i].set_in_loop < 127) ++regs->array[regno+i].set_in_loop; last_set[regno+i] = insn; } } } } /* Given a loop that is bounded by LOOP->START and LOOP->END and that is entered at LOOP->SCAN_START, return 1 if the register set in SET contained in insn INSN is used by any insn that precedes INSN in cyclic order starting from the loop entry point. We don't want to use INSN_LUID here because if we restrict INSN to those that have a valid INSN_LUID, it means we cannot move an invariant out from an inner loop past two loops. */ static int loop_reg_used_before_p (const struct loop *loop, rtx set, rtx insn) { rtx reg = SET_DEST (set); rtx p; /* Scan forward checking for register usage. If we hit INSN, we are done. Otherwise, if we hit LOOP->END, wrap around to LOOP->START. */ for (p = loop->scan_start; p != insn; p = NEXT_INSN (p)) { if (INSN_P (p) && reg_overlap_mentioned_p (reg, PATTERN (p))) return 1; if (p == loop->end) p = loop->start; } return 0; } /* Information we collect about arrays that we might want to prefetch. */ struct prefetch_info { struct iv_class *class; /* Class this prefetch is based on. */ struct induction *giv; /* GIV this prefetch is based on. */ rtx base_address; /* Start prefetching from this address plus index. */ HOST_WIDE_INT index; HOST_WIDE_INT stride; /* Prefetch stride in bytes in each iteration. */ unsigned int bytes_accessed; /* Sum of sizes of all accesses to this prefetch area in one iteration. */ unsigned int total_bytes; /* Total bytes loop will access in this block. This is set only for loops with known iteration counts and is 0xffffffff otherwise. */ int prefetch_in_loop; /* Number of prefetch insns in loop. */ int prefetch_before_loop; /* Number of prefetch insns before loop. */ unsigned int write : 1; /* 1 for read/write prefetches. */ }; /* Data used by check_store function. */ struct check_store_data { rtx mem_address; int mem_write; }; static void check_store (rtx, rtx, void *); static void emit_prefetch_instructions (struct loop *); static int rtx_equal_for_prefetch_p (rtx, rtx); /* Set mem_write when mem_address is found. Used as callback to note_stores. */ static void check_store (rtx x, rtx pat ATTRIBUTE_UNUSED, void *data) { struct check_store_data *d = (struct check_store_data *) data; if ((MEM_P (x)) && rtx_equal_p (d->mem_address, XEXP (x, 0))) d->mem_write = 1; } /* Like rtx_equal_p, but attempts to swap commutative operands. This is important to get some addresses combined. Later more sophisticated transformations can be added when necessary. ??? Same trick with swapping operand is done at several other places. It can be nice to develop some common way to handle this. */ static int rtx_equal_for_prefetch_p (rtx x, rtx y) { int i; int j; enum rtx_code code = GET_CODE (x); const char *fmt; if (x == y) return 1; if (code != GET_CODE (y)) return 0; if (GET_MODE (x) != GET_MODE (y)) return 0; switch (code) { case PC: case CC0: case CONST_INT: case CONST_DOUBLE: return 0; case LABEL_REF: return XEXP (x, 0) == XEXP (y, 0); default: break; } if (COMMUTATIVE_ARITH_P (x)) { return ((rtx_equal_for_prefetch_p (XEXP (x, 0), XEXP (y, 0)) && rtx_equal_for_prefetch_p (XEXP (x, 1), XEXP (y, 1))) || (rtx_equal_for_prefetch_p (XEXP (x, 0), XEXP (y, 1)) && rtx_equal_for_prefetch_p (XEXP (x, 1), XEXP (y, 0)))); } /* Compare the elements. If any pair of corresponding elements fails to match, return 0 for the whole thing. */ fmt = GET_RTX_FORMAT (code); for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) { switch (fmt[i]) { case 'w': if (XWINT (x, i) != XWINT (y, i)) return 0; break; case 'i': if (XINT (x, i) != XINT (y, i)) return 0; break; case 'E': /* Two vectors must have the same length. */ if (XVECLEN (x, i) != XVECLEN (y, i)) return 0; /* And the corresponding elements must match. */ for (j = 0; j < XVECLEN (x, i); j++) if (rtx_equal_for_prefetch_p (XVECEXP (x, i, j), XVECEXP (y, i, j)) == 0) return 0; break; case 'e': if (rtx_equal_for_prefetch_p (XEXP (x, i), XEXP (y, i)) == 0) return 0; break; case 's': if (strcmp (XSTR (x, i), XSTR (y, i))) return 0; break; case 'u': /* These are just backpointers, so they don't matter. */ break; case '0': break; /* It is believed that rtx's at this level will never contain anything but integers and other rtx's, except for within LABEL_REFs and SYMBOL_REFs. */ default: gcc_unreachable (); } } return 1; } /* Remove constant addition value from the expression X (when present) and return it. */ static HOST_WIDE_INT remove_constant_addition (rtx *x) { HOST_WIDE_INT addval = 0; rtx exp = *x; /* Avoid clobbering a shared CONST expression. */ if (GET_CODE (exp) == CONST) { if (GET_CODE (XEXP (exp, 0)) == PLUS && GET_CODE (XEXP (XEXP (exp, 0), 0)) == SYMBOL_REF && GET_CODE (XEXP (XEXP (exp, 0), 1)) == CONST_INT) { *x = XEXP (XEXP (exp, 0), 0); return INTVAL (XEXP (XEXP (exp, 0), 1)); } return 0; } if (GET_CODE (exp) == CONST_INT) { addval = INTVAL (exp); *x = const0_rtx; } /* For plus expression recurse on ourself. */ else if (GET_CODE (exp) == PLUS) { addval += remove_constant_addition (&XEXP (exp, 0)); addval += remove_constant_addition (&XEXP (exp, 1)); /* In case our parameter was constant, remove extra zero from the expression. */ if (XEXP (exp, 0) == const0_rtx) *x = XEXP (exp, 1); else if (XEXP (exp, 1) == const0_rtx) *x = XEXP (exp, 0); } return addval; } /* Attempt to identify accesses to arrays that are most likely to cause cache misses, and emit prefetch instructions a few prefetch blocks forward. To detect the arrays we use the GIV information that was collected by the strength reduction pass. The prefetch instructions are generated after the GIV information is done and before the strength reduction process. The new GIVs are injected into the strength reduction tables, so the prefetch addresses are optimized as well. GIVs are split into base address, stride, and constant addition values. GIVs with the same address, stride and close addition values are combined into a single prefetch. Also writes to GIVs are detected, so that prefetch for write instructions can be used for the block we write to, on machines that support write prefetches. Several heuristics are used to determine when to prefetch. They are controlled by defined symbols that can be overridden for each target. */ static void emit_prefetch_instructions (struct loop *loop) { int num_prefetches = 0; int num_real_prefetches = 0; int num_real_write_prefetches = 0; int num_prefetches_before = 0; int num_write_prefetches_before = 0; int ahead = 0; int i; struct iv_class *bl; struct induction *iv; struct prefetch_info info[MAX_PREFETCHES]; struct loop_ivs *ivs = LOOP_IVS (loop); if (!HAVE_prefetch || PREFETCH_BLOCK == 0) return; /* Consider only loops w/o calls. When a call is done, the loop is probably slow enough to read the memory. */ if (PREFETCH_NO_CALL && LOOP_INFO (loop)->has_call) { if (loop_dump_stream) fprintf (loop_dump_stream, "Prefetch: ignoring loop: has call.\n"); return; } /* Don't prefetch in loops known to have few iterations. */ if (PREFETCH_NO_LOW_LOOPCNT && LOOP_INFO (loop)->n_iterations && LOOP_INFO (loop)->n_iterations <= PREFETCH_LOW_LOOPCNT) { if (loop_dump_stream) fprintf (loop_dump_stream, "Prefetch: ignoring loop: not enough iterations.\n"); return; } /* Search all induction variables and pick those interesting for the prefetch machinery. */ for (bl = ivs->list; bl; bl = bl->next) { struct induction *biv = bl->biv, *biv1; int basestride = 0; biv1 = biv; /* Expect all BIVs to be executed in each iteration. This makes our analysis more conservative. */ while (biv1) { /* Discard non-constant additions that we can't handle well yet, and BIVs that are executed multiple times; such BIVs ought to be handled in the nested loop. We accept not_every_iteration BIVs, since these only result in larger strides and make our heuristics more conservative. */ if (GET_CODE (biv->add_val) != CONST_INT) { if (loop_dump_stream) { fprintf (loop_dump_stream, "Prefetch: ignoring biv %d: non-constant addition at insn %d:", REGNO (biv->src_reg), INSN_UID (biv->insn)); print_rtl (loop_dump_stream, biv->add_val); fprintf (loop_dump_stream, "\n"); } break; } if (biv->maybe_multiple) { if (loop_dump_stream) { fprintf (loop_dump_stream, "Prefetch: ignoring biv %d: maybe_multiple at insn %i:", REGNO (biv->src_reg), INSN_UID (biv->insn)); print_rtl (loop_dump_stream, biv->add_val); fprintf (loop_dump_stream, "\n"); } break; } basestride += INTVAL (biv1->add_val); biv1 = biv1->next_iv; } if (biv1 || !basestride) continue; for (iv = bl->giv; iv; iv = iv->next_iv) { rtx address; rtx temp; HOST_WIDE_INT index = 0; int add = 1; HOST_WIDE_INT stride = 0; int stride_sign = 1; struct check_store_data d; const char *ignore_reason = NULL; int size = GET_MODE_SIZE (GET_MODE (iv)); /* See whether an induction variable is interesting to us and if not, report the reason. */ if (iv->giv_type != DEST_ADDR) ignore_reason = "giv is not a destination address"; /* We are interested only in constant stride memory references in order to be able to compute density easily. */ else if (GET_CODE (iv->mult_val) != CONST_INT) ignore_reason = "stride is not constant"; else { stride = INTVAL (iv->mult_val) * basestride; if (stride < 0) { stride = -stride; stride_sign = -1; } /* On some targets, reversed order prefetches are not worthwhile. */ if (PREFETCH_NO_REVERSE_ORDER && stride_sign < 0) ignore_reason = "reversed order stride"; /* Prefetch of accesses with an extreme stride might not be worthwhile, either. */ else if (PREFETCH_NO_EXTREME_STRIDE && stride > PREFETCH_EXTREME_STRIDE) ignore_reason = "extreme stride"; /* Ignore GIVs with varying add values; we can't predict the value for the next iteration. */ else if (!loop_invariant_p (loop, iv->add_val)) ignore_reason = "giv has varying add value"; /* Ignore GIVs in the nested loops; they ought to have been handled already. */ else if (iv->maybe_multiple) ignore_reason = "giv is in nested loop"; } if (ignore_reason != NULL) { if (loop_dump_stream) fprintf (loop_dump_stream, "Prefetch: ignoring giv at %d: %s.\n", INSN_UID (iv->insn), ignore_reason); continue; } /* Determine the pointer to the basic array we are examining. It is the sum of the BIV's initial value and the GIV's add_val. */ address = copy_rtx (iv->add_val); temp = copy_rtx (bl->initial_value); address = simplify_gen_binary (PLUS, Pmode, temp, address); index = remove_constant_addition (&address); d.mem_write = 0; d.mem_address = *iv->location; /* When the GIV is not always executed, we might be better off by not dirtying the cache pages. */ if (PREFETCH_CONDITIONAL || iv->always_executed) note_stores (PATTERN (iv->insn), check_store, &d); else { if (loop_dump_stream) fprintf (loop_dump_stream, "Prefetch: Ignoring giv at %d: %s\n", INSN_UID (iv->insn), "in conditional code."); continue; } /* Attempt to find another prefetch to the same array and see if we can merge this one. */ for (i = 0; i < num_prefetches; i++) if (rtx_equal_for_prefetch_p (address, info[i].base_address) && stride == info[i].stride) { /* In case both access same array (same location just with small difference in constant indexes), merge the prefetches. Just do the later and the earlier will get prefetched from previous iteration. The artificial threshold should not be too small, but also not bigger than small portion of memory usually traversed by single loop. */ if (index >= info[i].index && index - info[i].index < PREFETCH_EXTREME_DIFFERENCE) { info[i].write |= d.mem_write; info[i].bytes_accessed += size; info[i].index = index; info[i].giv = iv; info[i].class = bl; info[num_prefetches].base_address = address; add = 0; break; } if (index < info[i].index && info[i].index - index < PREFETCH_EXTREME_DIFFERENCE) { info[i].write |= d.mem_write; info[i].bytes_accessed += size; add = 0; break; } } /* Merging failed. */ if (add) { info[num_prefetches].giv = iv; info[num_prefetches].class = bl; info[num_prefetches].index = index; info[num_prefetches].stride = stride; info[num_prefetches].base_address = address; info[num_prefetches].write = d.mem_write; info[num_prefetches].bytes_accessed = size; num_prefetches++; if (num_prefetches >= MAX_PREFETCHES) { if (loop_dump_stream) fprintf (loop_dump_stream, "Maximal number of prefetches exceeded.\n"); return; } } } } for (i = 0; i < num_prefetches; i++) { int density; /* Attempt to calculate the total number of bytes fetched by all iterations of the loop. Avoid overflow. */ if (LOOP_INFO (loop)->n_iterations && ((unsigned HOST_WIDE_INT) (0xffffffff / info[i].stride) >= LOOP_INFO (loop)->n_iterations)) info[i].total_bytes = info[i].stride * LOOP_INFO (loop)->n_iterations; else info[i].total_bytes = 0xffffffff; density = info[i].bytes_accessed * 100 / info[i].stride; /* Prefetch might be worthwhile only when the loads/stores are dense. */ if (PREFETCH_ONLY_DENSE_MEM) if (density * 256 > PREFETCH_DENSE_MEM * 100 && (info[i].total_bytes / PREFETCH_BLOCK >= PREFETCH_BLOCKS_BEFORE_LOOP_MIN)) { info[i].prefetch_before_loop = 1; info[i].prefetch_in_loop = (info[i].total_bytes / PREFETCH_BLOCK > PREFETCH_BLOCKS_BEFORE_LOOP_MAX); } else { info[i].prefetch_in_loop = 0, info[i].prefetch_before_loop = 0; if (loop_dump_stream) fprintf (loop_dump_stream, "Prefetch: ignoring giv at %d: %d%% density is too low.\n", INSN_UID (info[i].giv->insn), density); } else info[i].prefetch_in_loop = 1, info[i].prefetch_before_loop = 1; /* Find how many prefetch instructions we'll use within the loop. */ if (info[i].prefetch_in_loop != 0) { info[i].prefetch_in_loop = ((info[i].stride + PREFETCH_BLOCK - 1) / PREFETCH_BLOCK); num_real_prefetches += info[i].prefetch_in_loop; if (info[i].write) num_real_write_prefetches += info[i].prefetch_in_loop; } } /* Determine how many iterations ahead to prefetch within the loop, based on how many prefetches we currently expect to do within the loop. */ if (num_real_prefetches != 0) { if ((ahead = SIMULTANEOUS_PREFETCHES / num_real_prefetches) == 0) { if (loop_dump_stream) fprintf (loop_dump_stream, "Prefetch: ignoring prefetches within loop: ahead is zero; %d < %d\n", SIMULTANEOUS_PREFETCHES, num_real_prefetches); num_real_prefetches = 0, num_real_write_prefetches = 0; } } /* We'll also use AHEAD to determine how many prefetch instructions to emit before a loop, so don't leave it zero. */ if (ahead == 0) ahead = PREFETCH_BLOCKS_BEFORE_LOOP_MAX; for (i = 0; i < num_prefetches; i++) { /* Update if we've decided not to prefetch anything within the loop. */ if (num_real_prefetches == 0) info[i].prefetch_in_loop = 0; /* Find how many prefetch instructions we'll use before the loop. */ if (info[i].prefetch_before_loop != 0) { int n = info[i].total_bytes / PREFETCH_BLOCK; if (n > ahead) n = ahead; info[i].prefetch_before_loop = n; num_prefetches_before += n; if (info[i].write) num_write_prefetches_before += n; } if (loop_dump_stream) { if (info[i].prefetch_in_loop == 0 && info[i].prefetch_before_loop == 0) continue; fprintf (loop_dump_stream, "Prefetch insn: %d", INSN_UID (info[i].giv->insn)); fprintf (loop_dump_stream, "; in loop: %d; before: %d; %s\n", info[i].prefetch_in_loop, info[i].prefetch_before_loop, info[i].write ? "read/write" : "read only"); fprintf (loop_dump_stream, " density: %d%%; bytes_accessed: %u; total_bytes: %u\n", (int) (info[i].bytes_accessed * 100 / info[i].stride), info[i].bytes_accessed, info[i].total_bytes); fprintf (loop_dump_stream, " index: " HOST_WIDE_INT_PRINT_DEC "; stride: " HOST_WIDE_INT_PRINT_DEC "; address: ", info[i].index, info[i].stride); print_rtl (loop_dump_stream, info[i].base_address); fprintf (loop_dump_stream, "\n"); } } if (num_real_prefetches + num_prefetches_before > 0) { /* Record that this loop uses prefetch instructions. */ LOOP_INFO (loop)->has_prefetch = 1; if (loop_dump_stream) { fprintf (loop_dump_stream, "Real prefetches needed within loop: %d (write: %d)\n", num_real_prefetches, num_real_write_prefetches); fprintf (loop_dump_stream, "Real prefetches needed before loop: %d (write: %d)\n", num_prefetches_before, num_write_prefetches_before); } } for (i = 0; i < num_prefetches; i++) { int y; for (y = 0; y < info[i].prefetch_in_loop; y++) { rtx loc = copy_rtx (*info[i].giv->location); rtx insn; int bytes_ahead = PREFETCH_BLOCK * (ahead + y); rtx before_insn = info[i].giv->insn; rtx prev_insn = PREV_INSN (info[i].giv->insn); rtx seq; /* We can save some effort by offsetting the address on architectures with offsettable memory references. */ if (offsettable_address_p (0, VOIDmode, loc)) loc = plus_constant (loc, bytes_ahead); else { rtx reg = gen_reg_rtx (Pmode); loop_iv_add_mult_emit_before (loop, loc, const1_rtx, GEN_INT (bytes_ahead), reg, 0, before_insn); loc = reg; } start_sequence (); /* Make sure the address operand is valid for prefetch. */ if (! (*insn_data[(int)CODE_FOR_prefetch].operand[0].predicate) (loc, insn_data[(int)CODE_FOR_prefetch].operand[0].mode)) loc = force_reg (Pmode, loc); emit_insn (gen_prefetch (loc, GEN_INT (info[i].write), GEN_INT (3))); seq = get_insns (); end_sequence (); emit_insn_before (seq, before_insn); /* Check all insns emitted and record the new GIV information. */ insn = NEXT_INSN (prev_insn); while (insn != before_insn) { insn = check_insn_for_givs (loop, insn, info[i].giv->always_executed, info[i].giv->maybe_multiple); insn = NEXT_INSN (insn); } } if (PREFETCH_BEFORE_LOOP) { /* Emit insns before the loop to fetch the first cache lines or, if we're not prefetching within the loop, everything we expect to need. */ for (y = 0; y < info[i].prefetch_before_loop; y++) { rtx reg = gen_reg_rtx (Pmode); rtx loop_start = loop->start; rtx init_val = info[i].class->initial_value; rtx add_val = simplify_gen_binary (PLUS, Pmode, info[i].giv->add_val, GEN_INT (y * PREFETCH_BLOCK)); /* Functions called by LOOP_IV_ADD_EMIT_BEFORE expect a non-constant INIT_VAL to have the same mode as REG, which in this case we know to be Pmode. */ if (GET_MODE (init_val) != Pmode && !CONSTANT_P (init_val)) { rtx seq; start_sequence (); init_val = convert_to_mode (Pmode, init_val, 0); seq = get_insns (); end_sequence (); loop_insn_emit_before (loop, 0, loop_start, seq); } loop_iv_add_mult_emit_before (loop, init_val, info[i].giv->mult_val, add_val, reg, 0, loop_start); emit_insn_before (gen_prefetch (reg, GEN_INT (info[i].write), GEN_INT (3)), loop_start); } } } return; } /* Communication with routines called via `note_stores'. */ static rtx note_insn; /* Dummy register to have nonzero DEST_REG for DEST_ADDR type givs. */ static rtx addr_placeholder; /* ??? Unfinished optimizations, and possible future optimizations, for the strength reduction code. */ /* ??? The interaction of biv elimination, and recognition of 'constant' bivs, may cause problems. */ /* ??? Add heuristics so that DEST_ADDR strength reduction does not cause performance problems. Perhaps don't eliminate things that can be combined with an addressing mode. Find all givs that have the same biv, mult_val, and add_val; then for each giv, check to see if its only use dies in a following memory address. If so, generate a new memory address and check to see if it is valid. If it is valid, then store the modified memory address, otherwise, mark the giv as not done so that it will get its own iv. */ /* ??? Could try to optimize branches when it is known that a biv is always positive. */ /* ??? When replace a biv in a compare insn, we should replace with closest giv so that an optimized branch can still be recognized by the combiner, e.g. the VAX acb insn. */ /* ??? Many of the checks involving uid_luid could be simplified if regscan was rerun in loop_optimize whenever a register was added or moved. Also, some of the optimizations could be a little less conservative. */ /* Searches the insns between INSN and LOOP->END. Returns 1 if there is a backward branch in that range that branches to somewhere between LOOP->START and INSN. Returns 0 otherwise. */ /* ??? This is quadratic algorithm. Could be rewritten to be linear. In practice, this is not a problem, because this function is seldom called, and uses a negligible amount of CPU time on average. */ static int back_branch_in_range_p (const struct loop *loop, rtx insn) { rtx p, q, target_insn; rtx loop_start = loop->start; rtx loop_end = loop->end; rtx orig_loop_end = loop->end; /* Stop before we get to the backward branch at the end of the loop. */ loop_end = prev_nonnote_insn (loop_end); if (BARRIER_P (loop_end)) loop_end = PREV_INSN (loop_end); /* Check in case insn has been deleted, search forward for first non deleted insn following it. */ while (INSN_DELETED_P (insn)) insn = NEXT_INSN (insn); /* Check for the case where insn is the last insn in the loop. Deal with the case where INSN was a deleted loop test insn, in which case it will now be the NOTE_LOOP_END. */ if (insn == loop_end || insn == orig_loop_end) return 0; for (p = NEXT_INSN (insn); p != loop_end; p = NEXT_INSN (p)) { if (JUMP_P (p)) { target_insn = JUMP_LABEL (p); /* Search from loop_start to insn, to see if one of them is the target_insn. We can't use INSN_LUID comparisons here, since insn may not have an LUID entry. */ for (q = loop_start; q != insn; q = NEXT_INSN (q)) if (q == target_insn) return 1; } } return 0; } /* Scan the loop body and call FNCALL for each insn. In the addition to the LOOP and INSN parameters pass MAYBE_MULTIPLE and NOT_EVERY_ITERATION to the callback. NOT_EVERY_ITERATION is 1 if current insn is not known to be executed at least once for every loop iteration except for the last one. MAYBE_MULTIPLE is 1 if current insn may be executed more than once for every loop iteration. */ typedef rtx (*loop_insn_callback) (struct loop *, rtx, int, int); static void for_each_insn_in_loop (struct loop *loop, loop_insn_callback fncall) { int not_every_iteration = 0; int maybe_multiple = 0; int past_loop_latch = 0; bool exit_test_is_entry = false; rtx p; /* If loop_scan_start points to the loop exit test, the loop body cannot be counted on running on every iteration, and we have to be wary of subversive use of gotos inside expression statements. */ if (prev_nonnote_insn (loop->scan_start) != prev_nonnote_insn (loop->start)) { exit_test_is_entry = true; maybe_multiple = back_branch_in_range_p (loop, loop->scan_start); } /* Scan through loop and update NOT_EVERY_ITERATION and MAYBE_MULTIPLE. */ for (p = next_insn_in_loop (loop, loop->scan_start); p != NULL_RTX; p = next_insn_in_loop (loop, p)) { p = fncall (loop, p, not_every_iteration, maybe_multiple); /* Past CODE_LABEL, we get to insns that may be executed multiple times. The only way we can be sure that they can't is if every jump insn between here and the end of the loop either returns, exits the loop, is a jump to a location that is still behind the label, or is a jump to the loop start. */ if (LABEL_P (p)) { rtx insn = p; maybe_multiple = 0; while (1) { insn = NEXT_INSN (insn); if (insn == loop->scan_start) break; if (insn == loop->end) { if (loop->top != 0) insn = loop->top; else break; if (insn == loop->scan_start) break; } if (JUMP_P (insn) && GET_CODE (PATTERN (insn)) != RETURN && (!any_condjump_p (insn) || (JUMP_LABEL (insn) != 0 && JUMP_LABEL (insn) != loop->scan_start && !loop_insn_first_p (p, JUMP_LABEL (insn))))) { maybe_multiple = 1; break; } } } /* Past a jump, we get to insns for which we can't count on whether they will be executed during each iteration. */ /* This code appears twice in strength_reduce. There is also similar code in scan_loop. */ if (JUMP_P (p) /* If we enter the loop in the middle, and scan around to the beginning, don't set not_every_iteration for that. This can be any kind of jump, since we want to know if insns will be executed if the loop is executed. */ && (exit_test_is_entry || !(JUMP_LABEL (p) == loop->top && ((NEXT_INSN (NEXT_INSN (p)) == loop->end && any_uncondjump_p (p)) || (NEXT_INSN (p) == loop->end && any_condjump_p (p)))))) { rtx label = 0; /* If this is a jump outside the loop, then it also doesn't matter. Check to see if the target of this branch is on the loop->exits_labels list. */ for (label = loop->exit_labels; label; label = LABEL_NEXTREF (label)) if (XEXP (label, 0) == JUMP_LABEL (p)) break; if (!label) not_every_iteration = 1; } /* Note if we pass a loop latch. If we do, then we can not clear NOT_EVERY_ITERATION below when we pass the last CODE_LABEL in a loop since a jump before the last CODE_LABEL may have started a new loop iteration. Note that LOOP_TOP is only set for rotated loops and we need this check for all loops, so compare against the CODE_LABEL which immediately follows LOOP_START. */ if (JUMP_P (p) && JUMP_LABEL (p) == NEXT_INSN (loop->start)) past_loop_latch = 1; /* Unlike in the code motion pass where MAYBE_NEVER indicates that an insn may never be executed, NOT_EVERY_ITERATION indicates whether or not an insn is known to be executed each iteration of the loop, whether or not any iterations are known to occur. Therefore, if we have just passed a label and have no more labels between here and the test insn of the loop, and we have not passed a jump to the top of the loop, then we know these insns will be executed each iteration. */ if (not_every_iteration && !past_loop_latch && LABEL_P (p) && no_labels_between_p (p, loop->end)) not_every_iteration = 0; } } static void loop_bivs_find (struct loop *loop) { struct loop_regs *regs = LOOP_REGS (loop); struct loop_ivs *ivs = LOOP_IVS (loop); /* Temporary list pointers for traversing ivs->list. */ struct iv_class *bl, **backbl; ivs->list = 0; for_each_insn_in_loop (loop, check_insn_for_bivs); /* Scan ivs->list to remove all regs that proved not to be bivs. Make a sanity check against regs->n_times_set. */ for (backbl = &ivs->list, bl = *backbl; bl; bl = bl->next) { if (REG_IV_TYPE (ivs, bl->regno) != BASIC_INDUCT /* Above happens if register modified by subreg, etc. */ /* Make sure it is not recognized as a basic induction var: */ || regs->array[bl->regno].n_times_set != bl->biv_count /* If never incremented, it is invariant that we decided not to move. So leave it alone. */ || ! bl->incremented) { if (loop_dump_stream) fprintf (loop_dump_stream, "Biv %d: discarded, %s\n", bl->regno, (REG_IV_TYPE (ivs, bl->regno) != BASIC_INDUCT ? "not induction variable" : (! bl->incremented ? "never incremented" : "count error"))); REG_IV_TYPE (ivs, bl->regno) = NOT_BASIC_INDUCT; *backbl = bl->next; } else { backbl = &bl->next; if (loop_dump_stream) fprintf (loop_dump_stream, "Biv %d: verified\n", bl->regno); } } } /* Determine how BIVS are initialized by looking through pre-header extended basic block. */ static void loop_bivs_init_find (struct loop *loop) { struct loop_ivs *ivs = LOOP_IVS (loop); /* Temporary list pointers for traversing ivs->list. */ struct iv_class *bl; int call_seen; rtx p; /* Find initial value for each biv by searching backwards from loop_start, halting at first label. Also record any test condition. */ call_seen = 0; for (p = loop->start; p && !LABEL_P (p); p = PREV_INSN (p)) { rtx test; note_insn = p; if (CALL_P (p)) call_seen = 1; if (INSN_P (p)) note_stores (PATTERN (p), record_initial, ivs); /* Record any test of a biv that branches around the loop if no store between it and the start of loop. We only care about tests with constants and registers and only certain of those. */ if (JUMP_P (p) && JUMP_LABEL (p) != 0 && next_real_insn (JUMP_LABEL (p)) == next_real_insn (loop->end) && (test = get_condition_for_loop (loop, p)) != 0 && REG_P (XEXP (test, 0)) && REGNO (XEXP (test, 0)) < max_reg_before_loop && (bl = REG_IV_CLASS (ivs, REGNO (XEXP (test, 0)))) != 0 && valid_initial_value_p (XEXP (test, 1), p, call_seen, loop->start) && bl->init_insn == 0) { /* If an NE test, we have an initial value! */ if (GET_CODE (test) == NE) { bl->init_insn = p; bl->init_set = gen_rtx_SET (VOIDmode, XEXP (test, 0), XEXP (test, 1)); } else bl->initial_test = test; } } } /* Look at the each biv and see if we can say anything better about its initial value from any initializing insns set up above. (This is done in two passes to avoid missing SETs in a PARALLEL.) */ static void loop_bivs_check (struct loop *loop) { struct loop_ivs *ivs = LOOP_IVS (loop); /* Temporary list pointers for traversing ivs->list. */ struct iv_class *bl; struct iv_class **backbl; for (backbl = &ivs->list; (bl = *backbl); backbl = &bl->next) { rtx src; rtx note; if (! bl->init_insn) continue; /* IF INIT_INSN has a REG_EQUAL or REG_EQUIV note and the value is a constant, use the value of that. */ if (((note = find_reg_note (bl->init_insn, REG_EQUAL, 0)) != NULL && CONSTANT_P (XEXP (note, 0))) || ((note = find_reg_note (bl->init_insn, REG_EQUIV, 0)) != NULL && CONSTANT_P (XEXP (note, 0)))) src = XEXP (note, 0); else src = SET_SRC (bl->init_set); if (loop_dump_stream) fprintf (loop_dump_stream, "Biv %d: initialized at insn %d: initial value ", bl->regno, INSN_UID (bl->init_insn)); if ((GET_MODE (src) == GET_MODE (regno_reg_rtx[bl->regno]) || GET_MODE (src) == VOIDmode) && valid_initial_value_p (src, bl->init_insn, LOOP_INFO (loop)->pre_header_has_call, loop->start)) { bl->initial_value = src; if (loop_dump_stream) { print_simple_rtl (loop_dump_stream, src); fputc ('\n', loop_dump_stream); } } /* If we can't make it a giv, let biv keep initial value of "itself". */ else if (loop_dump_stream) fprintf (loop_dump_stream, "is complex\n"); } } /* Search the loop for general induction variables. */ static void loop_givs_find (struct loop* loop) { for_each_insn_in_loop (loop, check_insn_for_givs); } /* For each giv for which we still don't know whether or not it is replaceable, check to see if it is replaceable because its final value can be calculated. */ static void loop_givs_check (struct loop *loop) { struct loop_ivs *ivs = LOOP_IVS (loop); struct iv_class *bl; for (bl = ivs->list; bl; bl = bl->next) { struct induction *v; for (v = bl->giv; v; v = v->next_iv) if (! v->replaceable && ! v->not_replaceable) check_final_value (loop, v); } } /* Try to generate the simplest rtx for the expression (PLUS (MULT mult1 mult2) add1). This is used to calculate the initial value of giv's. */ static rtx fold_rtx_mult_add (rtx mult1, rtx mult2, rtx add1, enum machine_mode mode) { rtx temp, mult_res; rtx result; /* The modes must all be the same. This should always be true. For now, check to make sure. */ gcc_assert (GET_MODE (mult1) == mode || GET_MODE (mult1) == VOIDmode); gcc_assert (GET_MODE (mult2) == mode || GET_MODE (mult2) == VOIDmode); gcc_assert (GET_MODE (add1) == mode || GET_MODE (add1) == VOIDmode); /* Ensure that if at least one of mult1/mult2 are constant, then mult2 will be a constant. */ if (GET_CODE (mult1) == CONST_INT) { temp = mult2; mult2 = mult1; mult1 = temp; } mult_res = simplify_binary_operation (MULT, mode, mult1, mult2); if (! mult_res) mult_res = gen_rtx_MULT (mode, mult1, mult2); /* Again, put the constant second. */ if (GET_CODE (add1) == CONST_INT) { temp = add1; add1 = mult_res; mult_res = temp; } result = simplify_binary_operation (PLUS, mode, add1, mult_res); if (! result) result = gen_rtx_PLUS (mode, add1, mult_res); return result; } /* Searches the list of induction struct's for the biv BL, to try to calculate the total increment value for one iteration of the loop as a constant. Returns the increment value as an rtx, simplified as much as possible, if it can be calculated. Otherwise, returns 0. */ static rtx biv_total_increment (const struct iv_class *bl) { struct induction *v; rtx result; /* For increment, must check every instruction that sets it. Each instruction must be executed only once each time through the loop. To verify this, we check that the insn is always executed, and that there are no backward branches after the insn that branch to before it. Also, the insn must have a mult_val of one (to make sure it really is an increment). */ result = const0_rtx; for (v = bl->biv; v; v = v->next_iv) { if (v->always_computable && v->mult_val == const1_rtx && ! v->maybe_multiple && SCALAR_INT_MODE_P (v->mode)) { /* If we have already counted it, skip it. */ if (v->same) continue; result = fold_rtx_mult_add (result, const1_rtx, v->add_val, v->mode); } else return 0; } return result; } /* Try to prove that the register is dead after the loop exits. Trace every loop exit looking for an insn that will always be executed, which sets the register to some value, and appears before the first use of the register is found. If successful, then return 1, otherwise return 0. */ /* ?? Could be made more intelligent in the handling of jumps, so that it can search past if statements and other similar structures. */ static int reg_dead_after_loop (const struct loop *loop, rtx reg) { rtx insn, label; int jump_count = 0; int label_count = 0; /* In addition to checking all exits of this loop, we must also check all exits of inner nested loops that would exit this loop. We don't have any way to identify those, so we just give up if there are any such inner loop exits. */ for (label = loop->exit_labels; label; label = LABEL_NEXTREF (label)) label_count++; if (label_count != loop->exit_count) return 0; /* HACK: Must also search the loop fall through exit, create a label_ref here which points to the loop->end, and append the loop_number_exit_labels list to it. */ label = gen_rtx_LABEL_REF (Pmode, loop->end); LABEL_NEXTREF (label) = loop->exit_labels; for (; label; label = LABEL_NEXTREF (label)) { /* Succeed if find an insn which sets the biv or if reach end of function. Fail if find an insn that uses the biv, or if come to a conditional jump. */ insn = NEXT_INSN (XEXP (label, 0)); while (insn) { if (INSN_P (insn)) { rtx set, note; if (reg_referenced_p (reg, PATTERN (insn))) return 0; note = find_reg_equal_equiv_note (insn); if (note && reg_overlap_mentioned_p (reg, XEXP (note, 0))) return 0; set = single_set (insn); if (set && rtx_equal_p (SET_DEST (set), reg)) break; if (JUMP_P (insn)) { if (GET_CODE (PATTERN (insn)) == RETURN) break; else if (!any_uncondjump_p (insn) /* Prevent infinite loop following infinite loops. */ || jump_count++ > 20) return 0; else insn = JUMP_LABEL (insn); } } insn = NEXT_INSN (insn); } } /* Success, the register is dead on all loop exits. */ return 1; } /* Try to calculate the final value of the biv, the value it will have at the end of the loop. If we can do it, return that value. */ static rtx final_biv_value (const struct loop *loop, struct iv_class *bl) { unsigned HOST_WIDE_INT n_iterations = LOOP_INFO (loop)->n_iterations; rtx increment, tem; /* ??? This only works for MODE_INT biv's. Reject all others for now. */ if (GET_MODE_CLASS (bl->biv->mode) != MODE_INT) return 0; /* The final value for reversed bivs must be calculated differently than for ordinary bivs. In this case, there is already an insn after the loop which sets this biv's final value (if necessary), and there are no other loop exits, so we can return any value. */ if (bl->reversed) { if (loop_dump_stream) fprintf (loop_dump_stream, "Final biv value for %d, reversed biv.\n", bl->regno); return const0_rtx; } /* Try to calculate the final value as initial value + (number of iterations * increment). For this to work, increment must be invariant, the only exit from the loop must be the fall through at the bottom (otherwise it may not have its final value when the loop exits), and the initial value of the biv must be invariant. */ if (n_iterations != 0 && ! loop->exit_count && loop_invariant_p (loop, bl->initial_value)) { increment = biv_total_increment (bl); if (increment && loop_invariant_p (loop, increment)) { /* Can calculate the loop exit value, emit insns after loop end to calculate this value into a temporary register in case it is needed later. */ tem = gen_reg_rtx (bl->biv->mode); record_base_value (REGNO (tem), bl->biv->add_val, 0); loop_iv_add_mult_sink (loop, increment, GEN_INT (n_iterations), bl->initial_value, tem); if (loop_dump_stream) fprintf (loop_dump_stream, "Final biv value for %d, calculated.\n", bl->regno); return tem; } } /* Check to see if the biv is dead at all loop exits. */ if (reg_dead_after_loop (loop, bl->biv->src_reg)) { if (loop_dump_stream) fprintf (loop_dump_stream, "Final biv value for %d, biv dead after loop exit.\n", bl->regno); return const0_rtx; } return 0; } /* Return nonzero if it is possible to eliminate the biv BL provided all givs are reduced. This is possible if either the reg is not used outside the loop, or we can compute what its final value will be. */ static int loop_biv_eliminable_p (struct loop *loop, struct iv_class *bl, int threshold, int insn_count) { /* For architectures with a decrement_and_branch_until_zero insn, don't do this if we put a REG_NONNEG note on the endtest for this biv. */ #ifdef HAVE_decrement_and_branch_until_zero if (bl->nonneg) { if (loop_dump_stream) fprintf (loop_dump_stream, "Cannot eliminate nonneg biv %d.\n", bl->regno); return 0; } #endif /* Check that biv is used outside loop or if it has a final value. Compare against bl->init_insn rather than loop->start. We aren't concerned with any uses of the biv between init_insn and loop->start since these won't be affected by the value of the biv elsewhere in the function, so long as init_insn doesn't use the biv itself. */ if ((REGNO_LAST_LUID (bl->regno) < INSN_LUID (loop->end) && bl->init_insn && INSN_UID (bl->init_insn) < max_uid_for_loop && REGNO_FIRST_LUID (bl->regno) >= INSN_LUID (bl->init_insn) && ! reg_mentioned_p (bl->biv->dest_reg, SET_SRC (bl->init_set))) || (bl->final_value = final_biv_value (loop, bl))) return maybe_eliminate_biv (loop, bl, 0, threshold, insn_count); if (loop_dump_stream) { fprintf (loop_dump_stream, "Cannot eliminate biv %d.\n", bl->regno); fprintf (loop_dump_stream, "First use: insn %d, last use: insn %d.\n", REGNO_FIRST_UID (bl->regno), REGNO_LAST_UID (bl->regno)); } return 0; } /* Reduce each giv of BL that we have decided to reduce. */ static void loop_givs_reduce (struct loop *loop, struct iv_class *bl) { struct induction *v; for (v = bl->giv; v; v = v->next_iv) { struct induction *tv; if (! v->ignore && v->same == 0) { int auto_inc_opt = 0; /* If the code for derived givs immediately below has already allocated a new_reg, we must keep it. */ if (! v->new_reg) v->new_reg = gen_reg_rtx (v->mode); #ifdef AUTO_INC_DEC /* If the target has auto-increment addressing modes, and this is an address giv, then try to put the increment immediately after its use, so that flow can create an auto-increment addressing mode. */ /* Don't do this for loops entered at the bottom, to avoid this invalid transformation: jmp L; -> jmp L; TOP: TOP: use giv use giv L: inc giv inc biv L: test biv test giv cbr TOP cbr TOP */ if (v->giv_type == DEST_ADDR && bl->biv_count == 1 && bl->biv->always_executed && ! bl->biv->maybe_multiple /* We don't handle reversed biv's because bl->biv->insn does not have a valid INSN_LUID. */ && ! bl->reversed && v->always_executed && ! v->maybe_multiple && INSN_UID (v->insn) < max_uid_for_loop && !loop->top) { /* If other giv's have been combined with this one, then this will work only if all uses of the other giv's occur before this giv's insn. This is difficult to check. We simplify this by looking for the common case where there is one DEST_REG giv, and this giv's insn is the last use of the dest_reg of that DEST_REG giv. If the increment occurs after the address giv, then we can perform the optimization. (Otherwise, the increment would have to go before other_giv, and we would not be able to combine it with the address giv to get an auto-inc address.) */ if (v->combined_with) { struct induction *other_giv = 0; for (tv = bl->giv; tv; tv = tv->next_iv) if (tv->same == v) { if (other_giv) break; else other_giv = tv; } if (! tv && other_giv && REGNO (other_giv->dest_reg) < max_reg_before_loop && (REGNO_LAST_UID (REGNO (other_giv->dest_reg)) == INSN_UID (v->insn)) && INSN_LUID (v->insn) < INSN_LUID (bl->biv->insn)) auto_inc_opt = 1; } /* Check for case where increment is before the address giv. Do this test in "loop order". */ else if ((INSN_LUID (v->insn) > INSN_LUID (bl->biv->insn) && (INSN_LUID (v->insn) < INSN_LUID (loop->scan_start) || (INSN_LUID (bl->biv->insn) > INSN_LUID (loop->scan_start)))) || (INSN_LUID (v->insn) < INSN_LUID (loop->scan_start) && (INSN_LUID (loop->scan_start) < INSN_LUID (bl->biv->insn)))) auto_inc_opt = -1; else auto_inc_opt = 1; #ifdef HAVE_cc0 { rtx prev; /* We can't put an insn immediately after one setting cc0, or immediately before one using cc0. */ if ((auto_inc_opt == 1 && sets_cc0_p (PATTERN (v->insn))) || (auto_inc_opt == -1 && (prev = prev_nonnote_insn (v->insn)) != 0 && INSN_P (prev) && sets_cc0_p (PATTERN (prev)))) auto_inc_opt = 0; } #endif if (auto_inc_opt) v->auto_inc_opt = 1; } #endif /* For each place where the biv is incremented, add an insn to increment the new, reduced reg for the giv. */ for (tv = bl->biv; tv; tv = tv->next_iv) { rtx insert_before; /* Skip if location is the same as a previous one. */ if (tv->same) continue; if (! auto_inc_opt) insert_before = NEXT_INSN (tv->insn); else if (auto_inc_opt == 1) insert_before = NEXT_INSN (v->insn); else insert_before = v->insn; if (tv->mult_val == const1_rtx) loop_iv_add_mult_emit_before (loop, tv->add_val, v->mult_val, v->new_reg, v->new_reg, 0, insert_before); else /* tv->mult_val == const0_rtx */ /* A multiply is acceptable here since this is presumed to be seldom executed. */ loop_iv_add_mult_emit_before (loop, tv->add_val, v->mult_val, v->add_val, v->new_reg, 0, insert_before); } /* Add code at loop start to initialize giv's reduced reg. */ loop_iv_add_mult_hoist (loop, extend_value_for_giv (v, bl->initial_value), v->mult_val, v->add_val, v->new_reg); } } } /* Check for givs whose first use is their definition and whose last use is the definition of another giv. If so, it is likely dead and should not be used to derive another giv nor to eliminate a biv. */ static void loop_givs_dead_check (struct loop *loop ATTRIBUTE_UNUSED, struct iv_class *bl) { struct induction *v; for (v = bl->giv; v; v = v->next_iv) { if (v->ignore || (v->same && v->same->ignore)) continue; if (v->giv_type == DEST_REG && REGNO_FIRST_UID (REGNO (v->dest_reg)) == INSN_UID (v->insn)) { struct induction *v1; for (v1 = bl->giv; v1; v1 = v1->next_iv) if (REGNO_LAST_UID (REGNO (v->dest_reg)) == INSN_UID (v1->insn)) v->maybe_dead = 1; } } } static void loop_givs_rescan (struct loop *loop, struct iv_class *bl, rtx *reg_map) { struct induction *v; for (v = bl->giv; v; v = v->next_iv) { if (v->same && v->same->ignore) v->ignore = 1; if (v->ignore) continue; /* Update expression if this was combined, in case other giv was replaced. */ if (v->same) v->new_reg = replace_rtx (v->new_reg, v->same->dest_reg, v->same->new_reg); /* See if this register is known to be a pointer to something. If so, see if we can find the alignment. First see if there is a destination register that is a pointer. If so, this shares the alignment too. Next see if we can deduce anything from the computational information. If not, and this is a DEST_ADDR giv, at least we know that it's a pointer, though we don't know the alignment. */ if (REG_P (v->new_reg) && v->giv_type == DEST_REG && REG_POINTER (v->dest_reg)) mark_reg_pointer (v->new_reg, REGNO_POINTER_ALIGN (REGNO (v->dest_reg))); else if (REG_P (v->new_reg) && REG_POINTER (v->src_reg)) { unsigned int align = REGNO_POINTER_ALIGN (REGNO (v->src_reg)); if (align == 0 || GET_CODE (v->add_val) != CONST_INT || INTVAL (v->add_val) % (align / BITS_PER_UNIT) != 0) align = 0; mark_reg_pointer (v->new_reg, align); } else if (REG_P (v->new_reg) && REG_P (v->add_val) && REG_POINTER (v->add_val)) { unsigned int align = REGNO_POINTER_ALIGN (REGNO (v->add_val)); if (align == 0 || GET_CODE (v->mult_val) != CONST_INT || INTVAL (v->mult_val) % (align / BITS_PER_UNIT) != 0) align = 0; mark_reg_pointer (v->new_reg, align); } else if (REG_P (v->new_reg) && v->giv_type == DEST_ADDR) mark_reg_pointer (v->new_reg, 0); if (v->giv_type == DEST_ADDR) { /* Store reduced reg as the address in the memref where we found this giv. */ if (validate_change_maybe_volatile (v->insn, v->location, v->new_reg)) /* Yay, it worked! */; /* Not replaceable; emit an insn to set the original giv reg from the reduced giv. */ else if (REG_P (*v->location)) loop_insn_emit_before (loop, 0, v->insn, gen_move_insn (*v->location, v->new_reg)); else if (GET_CODE (*v->location) == PLUS && REG_P (XEXP (*v->location, 0)) && CONSTANT_P (XEXP (*v->location, 1))) { rtx tem; start_sequence (); tem = expand_simple_binop (GET_MODE (*v->location), MINUS, v->new_reg, XEXP (*v->location, 1), NULL_RTX, 0, OPTAB_LIB_WIDEN); emit_move_insn (XEXP (*v->location, 0), tem); tem = get_insns (); end_sequence (); loop_insn_emit_before (loop, 0, v->insn, tem); } else { /* If it wasn't a reg, create a pseudo and use that. */ rtx reg, seq; start_sequence (); reg = force_reg (v->mode, *v->location); if (validate_change_maybe_volatile (v->insn, v->location, reg)) { seq = get_insns (); end_sequence (); loop_insn_emit_before (loop, 0, v->insn, seq); } else { end_sequence (); if (loop_dump_stream) fprintf (loop_dump_stream, "unable to reduce iv in insn %d\n", INSN_UID (v->insn)); bl->all_reduced = 0; v->ignore = 1; continue; } } } else if (v->replaceable) { reg_map[REGNO (v->dest_reg)] = v->new_reg; } else { rtx original_insn = v->insn; rtx note; /* Not replaceable; emit an insn to set the original giv reg from the reduced giv, same as above. */ v->insn = loop_insn_emit_after (loop, 0, original_insn, gen_move_insn (v->dest_reg, v->new_reg)); /* The original insn may have a REG_EQUAL note. This note is now incorrect and may result in invalid substitutions later. The original insn is dead, but may be part of a libcall sequence, which doesn't seem worth the bother of handling. */ note = find_reg_note (original_insn, REG_EQUAL, NULL_RTX); if (note) remove_note (original_insn, note); } /* When a loop is reversed, givs which depend on the reversed biv, and which are live outside the loop, must be set to their correct final value. This insn is only needed if the giv is not replaceable. The correct final value is the same as the value that the giv starts the reversed loop with. */ if (bl->reversed && ! v->replaceable) loop_iv_add_mult_sink (loop, extend_value_for_giv (v, bl->initial_value), v->mult_val, v->add_val, v->dest_reg); else if (v->final_value) loop_insn_sink_or_swim (loop, gen_load_of_final_value (v->dest_reg, v->final_value)); if (loop_dump_stream) { fprintf (loop_dump_stream, "giv at %d reduced to ", INSN_UID (v->insn)); print_simple_rtl (loop_dump_stream, v->new_reg); fprintf (loop_dump_stream, "\n"); } } } static int loop_giv_reduce_benefit (struct loop *loop ATTRIBUTE_UNUSED, struct iv_class *bl, struct induction *v, rtx test_reg) { int add_cost; int benefit; benefit = v->benefit; PUT_MODE (test_reg, v->mode); add_cost = iv_add_mult_cost (bl->biv->add_val, v->mult_val, test_reg, test_reg); /* Reduce benefit if not replaceable, since we will insert a move-insn to replace the insn that calculates this giv. Don't do this unless the giv is a user variable, since it will often be marked non-replaceable because of the duplication of the exit code outside the loop. In such a case, the copies we insert are dead and will be deleted. So they don't have a cost. Similar situations exist. */ /* ??? The new final_[bg]iv_value code does a much better job of finding replaceable giv's, and hence this code may no longer be necessary. */ if (! v->replaceable && ! bl->eliminable && REG_USERVAR_P (v->dest_reg)) benefit -= copy_cost; /* Decrease the benefit to count the add-insns that we will insert to increment the reduced reg for the giv. ??? This can overestimate the run-time cost of the additional insns, e.g. if there are multiple basic blocks that increment the biv, but only one of these blocks is executed during each iteration. There is no good way to detect cases like this with the current structure of the loop optimizer. This code is more accurate for determining code size than run-time benefits. */ benefit -= add_cost * bl->biv_count; /* Decide whether to strength-reduce this giv or to leave the code unchanged (recompute it from the biv each time it is used). This decision can be made independently for each giv. */ #ifdef AUTO_INC_DEC /* Attempt to guess whether autoincrement will handle some of the new add insns; if so, increase BENEFIT (undo the subtraction of add_cost that was done above). */ if (v->giv_type == DEST_ADDR /* Increasing the benefit is risky, since this is only a guess. Avoid increasing register pressure in cases where there would be no other benefit from reducing this giv. */ && benefit > 0 && GET_CODE (v->mult_val) == CONST_INT) { int size = GET_MODE_SIZE (GET_MODE (v->mem)); if (HAVE_POST_INCREMENT && INTVAL (v->mult_val) == size) benefit += add_cost * bl->biv_count; else if (HAVE_PRE_INCREMENT && INTVAL (v->mult_val) == size) benefit += add_cost * bl->biv_count; else if (HAVE_POST_DECREMENT && -INTVAL (v->mult_val) == size) benefit += add_cost * bl->biv_count; else if (HAVE_PRE_DECREMENT && -INTVAL (v->mult_val) == size) benefit += add_cost * bl->biv_count; } #endif return benefit; } /* Free IV structures for LOOP. */ static void loop_ivs_free (struct loop *loop) { struct loop_ivs *ivs = LOOP_IVS (loop); struct iv_class *iv = ivs->list; free (ivs->regs); while (iv) { struct iv_class *next = iv->next; struct induction *induction; struct induction *next_induction; for (induction = iv->biv; induction; induction = next_induction) { next_induction = induction->next_iv; free (induction); } for (induction = iv->giv; induction; induction = next_induction) { next_induction = induction->next_iv; free (induction); } free (iv); iv = next; } } /* Look back before LOOP->START for the insn that sets REG and return the equivalent constant if there is a REG_EQUAL note otherwise just the SET_SRC of REG. */ static rtx loop_find_equiv_value (const struct loop *loop, rtx reg) { rtx loop_start = loop->start; rtx insn, set; rtx ret; ret = reg; for (insn = PREV_INSN (loop_start); insn; insn = PREV_INSN (insn)) { if (LABEL_P (insn)) break; else if (INSN_P (insn) && reg_set_p (reg, insn)) { /* We found the last insn before the loop that sets the register. If it sets the entire register, and has a REG_EQUAL note, then use the value of the REG_EQUAL note. */ if ((set = single_set (insn)) && (SET_DEST (set) == reg)) { rtx note = find_reg_note (insn, REG_EQUAL, NULL_RTX); /* Only use the REG_EQUAL note if it is a constant. Other things, divide in particular, will cause problems later if we use them. */ if (note && GET_CODE (XEXP (note, 0)) != EXPR_LIST && CONSTANT_P (XEXP (note, 0))) ret = XEXP (note, 0); else ret = SET_SRC (set); /* We cannot do this if it changes between the assignment and loop start though. */ if (modified_between_p (ret, insn, loop_start)) ret = reg; } break; } } return ret; } /* Find and return register term common to both expressions OP0 and OP1 or NULL_RTX if no such term exists. Each expression must be a REG or a PLUS of a REG. */ static rtx find_common_reg_term (rtx op0, rtx op1) { if ((REG_P (op0) || GET_CODE (op0) == PLUS) && (REG_P (op1) || GET_CODE (op1) == PLUS)) { rtx op00; rtx op01; rtx op10; rtx op11; if (GET_CODE (op0) == PLUS) op01 = XEXP (op0, 1), op00 = XEXP (op0, 0); else op01 = const0_rtx, op00 = op0; if (GET_CODE (op1) == PLUS) op11 = XEXP (op1, 1), op10 = XEXP (op1, 0); else op11 = const0_rtx, op10 = op1; /* Find and return common register term if present. */ if (REG_P (op00) && (op00 == op10 || op00 == op11)) return op00; else if (REG_P (op01) && (op01 == op10 || op01 == op11)) return op01; } /* No common register term found. */ return NULL_RTX; } /* Determine the loop iterator and calculate the number of loop iterations. Returns the exact number of loop iterations if it can be calculated, otherwise returns zero. */ static unsigned HOST_WIDE_INT loop_iterations (struct loop *loop) { struct loop_info *loop_info = LOOP_INFO (loop); struct loop_ivs *ivs = LOOP_IVS (loop); rtx comparison, comparison_value; rtx iteration_var, initial_value, increment, final_value; enum rtx_code comparison_code; HOST_WIDE_INT inc; unsigned HOST_WIDE_INT abs_inc; unsigned HOST_WIDE_INT abs_diff; int off_by_one; int increment_dir; int unsigned_p, compare_dir, final_larger; rtx last_loop_insn; struct iv_class *bl; loop_info->n_iterations = 0; loop_info->initial_value = 0; loop_info->initial_equiv_value = 0; loop_info->comparison_value = 0; loop_info->final_value = 0; loop_info->final_equiv_value = 0; loop_info->increment = 0; loop_info->iteration_var = 0; loop_info->iv = 0; /* We used to use prev_nonnote_insn here, but that fails because it might accidentally get the branch for a contained loop if the branch for this loop was deleted. We can only trust branches immediately before the loop_end. */ last_loop_insn = PREV_INSN (loop->end); /* ??? We should probably try harder to find the jump insn at the end of the loop. The following code assumes that the last loop insn is a jump to the top of the loop. */ if (!JUMP_P (last_loop_insn)) { if (loop_dump_stream) fprintf (loop_dump_stream, "Loop iterations: No final conditional branch found.\n"); return 0; } /* If there is a more than a single jump to the top of the loop we cannot (easily) determine the iteration count. */ if (LABEL_NUSES (JUMP_LABEL (last_loop_insn)) > 1) { if (loop_dump_stream) fprintf (loop_dump_stream, "Loop iterations: Loop has multiple back edges.\n"); return 0; } /* Find the iteration variable. If the last insn is a conditional branch, and the insn before tests a register value, make that the iteration variable. */ comparison = get_condition_for_loop (loop, last_loop_insn); if (comparison == 0) { if (loop_dump_stream) fprintf (loop_dump_stream, "Loop iterations: No final comparison found.\n"); return 0; } /* ??? Get_condition may switch position of induction variable and invariant register when it canonicalizes the comparison. */ comparison_code = GET_CODE (comparison); iteration_var = XEXP (comparison, 0); comparison_value = XEXP (comparison, 1); if (!REG_P (iteration_var)) { if (loop_dump_stream) fprintf (loop_dump_stream, "Loop iterations: Comparison not against register.\n"); return 0; } /* The only new registers that are created before loop iterations are givs made from biv increments or registers created by load_mems. In the latter case, it is possible that try_copy_prop will propagate a new pseudo into the old iteration register but this will be marked by having the REG_USERVAR_P bit set. */ gcc_assert ((unsigned) REGNO (iteration_var) < ivs->n_regs || REG_USERVAR_P (iteration_var)); /* Determine the initial value of the iteration variable, and the amount that it is incremented each loop. Use the tables constructed by the strength reduction pass to calculate these values. */ /* Clear the result values, in case no answer can be found. */ initial_value = 0; increment = 0; /* The iteration variable can be either a giv or a biv. Check to see which it is, and compute the variable's initial value, and increment value if possible. */ /* If this is a new register, can't handle it since we don't have any reg_iv_type entry for it. */ if ((unsigned) REGNO (iteration_var) >= ivs->n_regs) { if (loop_dump_stream) fprintf (loop_dump_stream, "Loop iterations: No reg_iv_type entry for iteration var.\n"); return 0; } /* Reject iteration variables larger than the host wide int size, since they could result in a number of iterations greater than the range of our `unsigned HOST_WIDE_INT' variable loop_info->n_iterations. */ else if ((GET_MODE_BITSIZE (GET_MODE (iteration_var)) > HOST_BITS_PER_WIDE_INT)) { if (loop_dump_stream) fprintf (loop_dump_stream, "Loop iterations: Iteration var rejected because mode too large.\n"); return 0; } else if (GET_MODE_CLASS (GET_MODE (iteration_var)) != MODE_INT) { if (loop_dump_stream) fprintf (loop_dump_stream, "Loop iterations: Iteration var not an integer.\n"); return 0; } /* Try swapping the comparison to identify a suitable iv. */ if (REG_IV_TYPE (ivs, REGNO (iteration_var)) != BASIC_INDUCT && REG_IV_TYPE (ivs, REGNO (iteration_var)) != GENERAL_INDUCT && REG_P (comparison_value) && REGNO (comparison_value) < ivs->n_regs) { rtx temp = comparison_value; comparison_code = swap_condition (comparison_code); comparison_value = iteration_var; iteration_var = temp; } if (REG_IV_TYPE (ivs, REGNO (iteration_var)) == BASIC_INDUCT) { gcc_assert (REGNO (iteration_var) < ivs->n_regs); /* Grab initial value, only useful if it is a constant. */ bl = REG_IV_CLASS (ivs, REGNO (iteration_var)); initial_value = bl->initial_value; if (!bl->biv->always_executed || bl->biv->maybe_multiple) { if (loop_dump_stream) fprintf (loop_dump_stream, "Loop iterations: Basic induction var not set once in each iteration.\n"); return 0; } increment = biv_total_increment (bl); } else if (REG_IV_TYPE (ivs, REGNO (iteration_var)) == GENERAL_INDUCT) { HOST_WIDE_INT offset = 0; struct induction *v = REG_IV_INFO (ivs, REGNO (iteration_var)); rtx biv_initial_value; gcc_assert (REGNO (v->src_reg) < ivs->n_regs); if (!v->always_executed || v->maybe_multiple) { if (loop_dump_stream) fprintf (loop_dump_stream, "Loop iterations: General induction var not set once in each iteration.\n"); return 0; } bl = REG_IV_CLASS (ivs, REGNO (v->src_reg)); /* Increment value is mult_val times the increment value of the biv. */ increment = biv_total_increment (bl); if (increment) { struct induction *biv_inc; increment = fold_rtx_mult_add (v->mult_val, extend_value_for_giv (v, increment), const0_rtx, v->mode); /* The caller assumes that one full increment has occurred at the first loop test. But that's not true when the biv is incremented after the giv is set (which is the usual case), e.g.: i = 6; do {;} while (i++ < 9) . Therefore, we bias the initial value by subtracting the amount of the increment that occurs between the giv set and the giv test. */ for (biv_inc = bl->biv; biv_inc; biv_inc = biv_inc->next_iv) { if (loop_insn_first_p (v->insn, biv_inc->insn)) { if (REG_P (biv_inc->add_val)) { if (loop_dump_stream) fprintf (loop_dump_stream, "Loop iterations: Basic induction var add_val is REG %d.\n", REGNO (biv_inc->add_val)); return 0; } /* If we have already counted it, skip it. */ if (biv_inc->same) continue; offset -= INTVAL (biv_inc->add_val); } } } if (loop_dump_stream) fprintf (loop_dump_stream, "Loop iterations: Giv iterator, initial value bias %ld.\n", (long) offset); /* Initial value is mult_val times the biv's initial value plus add_val. Only useful if it is a constant. */ biv_initial_value = extend_value_for_giv (v, bl->initial_value); initial_value = fold_rtx_mult_add (v->mult_val, plus_constant (biv_initial_value, offset), v->add_val, v->mode); } else { if (loop_dump_stream) fprintf (loop_dump_stream, "Loop iterations: Not basic or general induction var.\n"); return 0; } if (initial_value == 0) return 0; unsigned_p = 0; off_by_one = 0; switch (comparison_code) { case LEU: unsigned_p = 1; case LE: compare_dir = 1; off_by_one = 1; break; case GEU: unsigned_p = 1; case GE: compare_dir = -1; off_by_one = -1; break; case EQ: /* Cannot determine loop iterations with this case. */ compare_dir = 0; break; case LTU: unsigned_p = 1; case LT: compare_dir = 1; break; case GTU: unsigned_p = 1; case GT: compare_dir = -1; break; case NE: compare_dir = 0; break; default: gcc_unreachable (); } /* If the comparison value is an invariant register, then try to find its value from the insns before the start of the loop. */ final_value = comparison_value; if (REG_P (comparison_value) && loop_invariant_p (loop, comparison_value)) { final_value = loop_find_equiv_value (loop, comparison_value); /* If we don't get an invariant final value, we are better off with the original register. */ if (! loop_invariant_p (loop, final_value)) final_value = comparison_value; } /* Calculate the approximate final value of the induction variable (on the last successful iteration). The exact final value depends on the branch operator, and increment sign. It will be wrong if the iteration variable is not incremented by one each time through the loop and (comparison_value + off_by_one - initial_value) % increment != 0. ??? Note that the final_value may overflow and thus final_larger will be bogus. A potentially infinite loop will be classified as immediate, e.g. for (i = 0x7ffffff0; i <= 0x7fffffff; i++) */ if (off_by_one) final_value = plus_constant (final_value, off_by_one); /* Save the calculated values describing this loop's bounds, in case precondition_loop_p will need them later. These values can not be recalculated inside precondition_loop_p because strength reduction optimizations may obscure the loop's structure. These values are only required by precondition_loop_p and insert_bct whenever the number of iterations cannot be computed at compile time. Only the difference between final_value and initial_value is important. Note that final_value is only approximate. */ loop_info->initial_value = initial_value; loop_info->comparison_value = comparison_value; loop_info->final_value = plus_constant (comparison_value, off_by_one); loop_info->increment = increment; loop_info->iteration_var = iteration_var; loop_info->comparison_code = comparison_code; loop_info->iv = bl; /* Try to determine the iteration count for loops such as (for i = init; i < init + const; i++). When running the loop optimization twice, the first pass often converts simple loops into this form. */ if (REG_P (initial_value)) { rtx reg1; rtx reg2; rtx const2; reg1 = initial_value; if (GET_CODE (final_value) == PLUS) reg2 = XEXP (final_value, 0), const2 = XEXP (final_value, 1); else reg2 = final_value, const2 = const0_rtx; /* Check for initial_value = reg1, final_value = reg2 + const2, where reg1 != reg2. */ if (REG_P (reg2) && reg2 != reg1) { rtx temp; /* Find what reg1 is equivalent to. Hopefully it will either be reg2 or reg2 plus a constant. */ temp = loop_find_equiv_value (loop, reg1); if (find_common_reg_term (temp, reg2)) initial_value = temp; else if (loop_invariant_p (loop, reg2)) { /* Find what reg2 is equivalent to. Hopefully it will either be reg1 or reg1 plus a constant. Let's ignore the latter case for now since it is not so common. */ temp = loop_find_equiv_value (loop, reg2); if (temp == loop_info->iteration_var) temp = initial_value; if (temp == reg1) final_value = (const2 == const0_rtx) ? reg1 : gen_rtx_PLUS (GET_MODE (reg1), reg1, const2); } } } loop_info->initial_equiv_value = initial_value; loop_info->final_equiv_value = final_value; /* For EQ comparison loops, we don't have a valid final value. Check this now so that we won't leave an invalid value if we return early for any other reason. */ if (comparison_code == EQ) loop_info->final_equiv_value = loop_info->final_value = 0; if (increment == 0) { if (loop_dump_stream) fprintf (loop_dump_stream, "Loop iterations: Increment value can't be calculated.\n"); return 0; } if (GET_CODE (increment) != CONST_INT) { /* If we have a REG, check to see if REG holds a constant value. */ /* ??? Other RTL, such as (neg (reg)) is possible here, but it isn't clear if it is worthwhile to try to handle such RTL. */ if (REG_P (increment) || GET_CODE (increment) == SUBREG) increment = loop_find_equiv_value (loop, increment); if (GET_CODE (increment) != CONST_INT) { if (loop_dump_stream) { fprintf (loop_dump_stream, "Loop iterations: Increment value not constant "); print_simple_rtl (loop_dump_stream, increment); fprintf (loop_dump_stream, ".\n"); } return 0; } loop_info->increment = increment; } if (GET_CODE (initial_value) != CONST_INT) { if (loop_dump_stream) { fprintf (loop_dump_stream, "Loop iterations: Initial value not constant "); print_simple_rtl (loop_dump_stream, initial_value); fprintf (loop_dump_stream, ".\n"); } return 0; } else if (GET_CODE (final_value) != CONST_INT) { if (loop_dump_stream) { fprintf (loop_dump_stream, "Loop iterations: Final value not constant "); print_simple_rtl (loop_dump_stream, final_value); fprintf (loop_dump_stream, ".\n"); } return 0; } else if (comparison_code == EQ) { rtx inc_once; if (loop_dump_stream) fprintf (loop_dump_stream, "Loop iterations: EQ comparison loop.\n"); inc_once = gen_int_mode (INTVAL (initial_value) + INTVAL (increment), GET_MODE (iteration_var)); if (inc_once == final_value) { /* The iterator value once through the loop is equal to the comparison value. Either we have an infinite loop, or we'll loop twice. */ if (increment == const0_rtx) return 0; loop_info->n_iterations = 2; } else loop_info->n_iterations = 1; if (GET_CODE (loop_info->initial_value) == CONST_INT) loop_info->final_value = gen_int_mode ((INTVAL (loop_info->initial_value) + loop_info->n_iterations * INTVAL (increment)), GET_MODE (iteration_var)); else loop_info->final_value = plus_constant (loop_info->initial_value, loop_info->n_iterations * INTVAL (increment)); loop_info->final_equiv_value = gen_int_mode ((INTVAL (initial_value) + loop_info->n_iterations * INTVAL (increment)), GET_MODE (iteration_var)); return loop_info->n_iterations; } /* Final_larger is 1 if final larger, 0 if they are equal, otherwise -1. */ if (unsigned_p) final_larger = ((unsigned HOST_WIDE_INT) INTVAL (final_value) > (unsigned HOST_WIDE_INT) INTVAL (initial_value)) - ((unsigned HOST_WIDE_INT) INTVAL (final_value) < (unsigned HOST_WIDE_INT) INTVAL (initial_value)); else final_larger = (INTVAL (final_value) > INTVAL (initial_value)) - (INTVAL (final_value) < INTVAL (initial_value)); if (INTVAL (increment) > 0) increment_dir = 1; else if (INTVAL (increment) == 0) increment_dir = 0; else increment_dir = -1; /* There are 27 different cases: compare_dir = -1, 0, 1; final_larger = -1, 0, 1; increment_dir = -1, 0, 1. There are 4 normal cases, 4 reverse cases (where the iteration variable will overflow before the loop exits), 4 infinite loop cases, and 15 immediate exit (0 or 1 iteration depending on loop type) cases. Only try to optimize the normal cases. */ /* (compare_dir/final_larger/increment_dir) Normal cases: (0/-1/-1), (0/1/1), (-1/-1/-1), (1/1/1) Reverse cases: (0/-1/1), (0/1/-1), (-1/-1/1), (1/1/-1) Infinite loops: (0/-1/0), (0/1/0), (-1/-1/0), (1/1/0) Immediate exit: (0/0/X), (-1/0/X), (-1/1/X), (1/0/X), (1/-1/X) */ /* ?? If the meaning of reverse loops (where the iteration variable will overflow before the loop exits) is undefined, then could eliminate all of these special checks, and just always assume the loops are normal/immediate/infinite. Note that this means the sign of increment_dir does not have to be known. Also, since it does not really hurt if immediate exit loops or infinite loops are optimized, then that case could be ignored also, and hence all loops can be optimized. According to ANSI Spec, the reverse loop case result is undefined, because the action on overflow is undefined. See also the special test for NE loops below. */ if (final_larger == increment_dir && final_larger != 0 && (final_larger == compare_dir || compare_dir == 0)) /* Normal case. */ ; else { if (loop_dump_stream) fprintf (loop_dump_stream, "Loop iterations: Not normal loop.\n"); return 0; } /* Calculate the number of iterations, final_value is only an approximation, so correct for that. Note that abs_diff and n_iterations are unsigned, because they can be as large as 2^n - 1. */ inc = INTVAL (increment); gcc_assert (inc); if (inc > 0) { abs_diff = INTVAL (final_value) - INTVAL (initial_value); abs_inc = inc; } else { abs_diff = INTVAL (initial_value) - INTVAL (final_value); abs_inc = -inc; } /* Given that iteration_var is going to iterate over its own mode, not HOST_WIDE_INT, disregard higher bits that might have come into the picture due to sign extension of initial and final values. */ abs_diff &= ((unsigned HOST_WIDE_INT) 1 << (GET_MODE_BITSIZE (GET_MODE (iteration_var)) - 1) << 1) - 1; /* For NE tests, make sure that the iteration variable won't miss the final value. If abs_diff mod abs_incr is not zero, then the iteration variable will overflow before the loop exits, and we can not calculate the number of iterations. */ if (compare_dir == 0 && (abs_diff % abs_inc) != 0) return 0; /* Note that the number of iterations could be calculated using (abs_diff + abs_inc - 1) / abs_inc, provided care was taken to handle potential overflow of the summation. */ loop_info->n_iterations = abs_diff / abs_inc + ((abs_diff % abs_inc) != 0); return loop_info->n_iterations; } /* Perform strength reduction and induction variable elimination. Pseudo registers created during this function will be beyond the last valid index in several tables including REGS->ARRAY[I].N_TIMES_SET and REGNO_LAST_UID. This does not cause a problem here, because the added registers cannot be givs outside of their loop, and hence will never be reconsidered. But scan_loop must check regnos to make sure they are in bounds. */ static void strength_reduce (struct loop *loop, int flags) { struct loop_info *loop_info = LOOP_INFO (loop); struct loop_regs *regs = LOOP_REGS (loop); struct loop_ivs *ivs = LOOP_IVS (loop); rtx p; /* Temporary list pointer for traversing ivs->list. */ struct iv_class *bl; /* Ratio of extra register life span we can justify for saving an instruction. More if loop doesn't call subroutines since in that case saving an insn makes more difference and more registers are available. */ /* ??? could set this to last value of threshold in move_movables */ int threshold = (loop_info->has_call ? 1 : 2) * (3 + n_non_fixed_regs); /* Map of pseudo-register replacements. */ rtx *reg_map = NULL; int reg_map_size; rtx test_reg = gen_rtx_REG (word_mode, LAST_VIRTUAL_REGISTER + 1); int insn_count = count_insns_in_loop (loop); addr_placeholder = gen_reg_rtx (Pmode); ivs->n_regs = max_reg_before_loop; ivs->regs = xcalloc (ivs->n_regs, sizeof (struct iv)); /* Find all BIVs in loop. */ loop_bivs_find (loop); /* Exit if there are no bivs. */ if (! ivs->list) { loop_ivs_free (loop); return; } /* Determine how BIVS are initialized by looking through pre-header extended basic block. */ loop_bivs_init_find (loop); /* Look at the each biv and see if we can say anything better about its initial value from any initializing insns set up above. */ loop_bivs_check (loop); /* Search the loop for general induction variables. */ loop_givs_find (loop); /* Try to calculate and save the number of loop iterations. This is set to zero if the actual number can not be calculated. This must be called after all giv's have been identified, since otherwise it may fail if the iteration variable is a giv. */ loop_iterations (loop); #ifdef HAVE_prefetch if (flags & LOOP_PREFETCH) emit_prefetch_instructions (loop); #endif /* Now for each giv for which we still don't know whether or not it is replaceable, check to see if it is replaceable because its final value can be calculated. This must be done after loop_iterations is called, so that final_giv_value will work correctly. */ loop_givs_check (loop); /* Try to prove that the loop counter variable (if any) is always nonnegative; if so, record that fact with a REG_NONNEG note so that "decrement and branch until zero" insn can be used. */ check_dbra_loop (loop, insn_count); /* Create reg_map to hold substitutions for replaceable giv regs. Some givs might have been made from biv increments, so look at ivs->reg_iv_type for a suitable size. */ reg_map_size = ivs->n_regs; reg_map = xcalloc (reg_map_size, sizeof (rtx)); /* Examine each iv class for feasibility of strength reduction/induction variable elimination. */ for (bl = ivs->list; bl; bl = bl->next) { struct induction *v; int benefit; /* Test whether it will be possible to eliminate this biv provided all givs are reduced. */ bl->eliminable = loop_biv_eliminable_p (loop, bl, threshold, insn_count); /* This will be true at the end, if all givs which depend on this biv have been strength reduced. We can't (currently) eliminate the biv unless this is so. */ bl->all_reduced = 1; /* Check each extension dependent giv in this class to see if its root biv is safe from wrapping in the interior mode. */ check_ext_dependent_givs (loop, bl); /* Combine all giv's for this iv_class. */ combine_givs (regs, bl); for (v = bl->giv; v; v = v->next_iv) { struct induction *tv; if (v->ignore || v->same) continue; benefit = loop_giv_reduce_benefit (loop, bl, v, test_reg); /* If an insn is not to be strength reduced, then set its ignore flag, and clear bl->all_reduced. */ /* A giv that depends on a reversed biv must be reduced if it is used after the loop exit, otherwise, it would have the wrong value after the loop exit. To make it simple, just reduce all of such giv's whether or not we know they are used after the loop exit. */ if (v->lifetime * threshold * benefit < insn_count && ! bl->reversed) { if (loop_dump_stream) fprintf (loop_dump_stream, "giv of insn %d not worth while, %d vs %d.\n", INSN_UID (v->insn), v->lifetime * threshold * benefit, insn_count); v->ignore = 1; bl->all_reduced = 0; } else { /* Check that we can increment the reduced giv without a multiply insn. If not, reject it. */ for (tv = bl->biv; tv; tv = tv->next_iv) if (tv->mult_val == const1_rtx && ! product_cheap_p (tv->add_val, v->mult_val)) { if (loop_dump_stream) fprintf (loop_dump_stream, "giv of insn %d: would need a multiply.\n", INSN_UID (v->insn)); v->ignore = 1; bl->all_reduced = 0; break; } } } /* Check for givs whose first use is their definition and whose last use is the definition of another giv. If so, it is likely dead and should not be used to derive another giv nor to eliminate a biv. */ loop_givs_dead_check (loop, bl); /* Reduce each giv that we decided to reduce. */ loop_givs_reduce (loop, bl); /* Rescan all givs. If a giv is the same as a giv not reduced, mark it as not reduced. For each giv register that can be reduced now: if replaceable, substitute reduced reg wherever the old giv occurs; else add new move insn "giv_reg = reduced_reg". */ loop_givs_rescan (loop, bl, reg_map); /* All the givs based on the biv bl have been reduced if they merit it. */ /* For each giv not marked as maybe dead that has been combined with a second giv, clear any "maybe dead" mark on that second giv. v->new_reg will either be or refer to the register of the giv it combined with. Doing this clearing avoids problems in biv elimination where a giv's new_reg is a complex value that can't be put in the insn but the giv combined with (with a reg as new_reg) is marked maybe_dead. Since the register will be used in either case, we'd prefer it be used from the simpler giv. */ for (v = bl->giv; v; v = v->next_iv) if (! v->maybe_dead && v->same) v->same->maybe_dead = 0; /* Try to eliminate the biv, if it is a candidate. This won't work if ! bl->all_reduced, since the givs we planned to use might not have been reduced. We have to be careful that we didn't initially think we could eliminate this biv because of a giv that we now think may be dead and shouldn't be used as a biv replacement. Also, there is the possibility that we may have a giv that looks like it can be used to eliminate a biv, but the resulting insn isn't valid. This can happen, for example, on the 88k, where a JUMP_INSN can compare a register only with zero. Attempts to replace it with a compare with a constant will fail. Note that in cases where this call fails, we may have replaced some of the occurrences of the biv with a giv, but no harm was done in doing so in the rare cases where it can occur. */ if (bl->all_reduced == 1 && bl->eliminable && maybe_eliminate_biv (loop, bl, 1, threshold, insn_count)) { /* ?? If we created a new test to bypass the loop entirely, or otherwise drop straight in, based on this test, then we might want to rewrite it also. This way some later pass has more hope of removing the initialization of this biv entirely. */ /* If final_value != 0, then the biv may be used after loop end and we must emit an insn to set it just in case. Reversed bivs already have an insn after the loop setting their value, so we don't need another one. We can't calculate the proper final value for such a biv here anyways. */ if (bl->final_value && ! bl->reversed) loop_insn_sink_or_swim (loop, gen_load_of_final_value (bl->biv->dest_reg, bl->final_value)); if (loop_dump_stream) fprintf (loop_dump_stream, "Reg %d: biv eliminated\n", bl->regno); } /* See above note wrt final_value. But since we couldn't eliminate the biv, we must set the value after the loop instead of before. */ else if (bl->final_value && ! bl->reversed) loop_insn_sink (loop, gen_load_of_final_value (bl->biv->dest_reg, bl->final_value)); } /* Go through all the instructions in the loop, making all the register substitutions scheduled in REG_MAP. */ for (p = loop->start; p != loop->end; p = NEXT_INSN (p)) if (INSN_P (p)) { replace_regs (PATTERN (p), reg_map, reg_map_size, 0); replace_regs (REG_NOTES (p), reg_map, reg_map_size, 0); INSN_CODE (p) = -1; } if (loop_dump_stream) fprintf (loop_dump_stream, "\n"); loop_ivs_free (loop); if (reg_map) free (reg_map); } /*Record all basic induction variables calculated in the insn. */ static rtx check_insn_for_bivs (struct loop *loop, rtx p, int not_every_iteration, int maybe_multiple) { struct loop_ivs *ivs = LOOP_IVS (loop); rtx set; rtx dest_reg; rtx inc_val; rtx mult_val; rtx *location; if (NONJUMP_INSN_P (p) && (set = single_set (p)) && REG_P (SET_DEST (set))) { dest_reg = SET_DEST (set); if (REGNO (dest_reg) < max_reg_before_loop && REGNO (dest_reg) >= FIRST_PSEUDO_REGISTER && REG_IV_TYPE (ivs, REGNO (dest_reg)) != NOT_BASIC_INDUCT) { if (basic_induction_var (loop, SET_SRC (set), GET_MODE (SET_SRC (set)), dest_reg, p, &inc_val, &mult_val, &location)) { /* It is a possible basic induction variable. Create and initialize an induction structure for it. */ struct induction *v = xmalloc (sizeof (struct induction)); record_biv (loop, v, p, dest_reg, inc_val, mult_val, location, not_every_iteration, maybe_multiple); REG_IV_TYPE (ivs, REGNO (dest_reg)) = BASIC_INDUCT; } else if (REGNO (dest_reg) < ivs->n_regs) REG_IV_TYPE (ivs, REGNO (dest_reg)) = NOT_BASIC_INDUCT; } } return p; } /* Record all givs calculated in the insn. A register is a giv if: it is only set once, it is a function of a biv and a constant (or invariant), and it is not a biv. */ static rtx check_insn_for_givs (struct loop *loop, rtx p, int not_every_iteration, int maybe_multiple) { struct loop_regs *regs = LOOP_REGS (loop); rtx set; /* Look for a general induction variable in a register. */ if (NONJUMP_INSN_P (p) && (set = single_set (p)) && REG_P (SET_DEST (set)) && ! regs->array[REGNO (SET_DEST (set))].may_not_optimize) { rtx src_reg; rtx dest_reg; rtx add_val; rtx mult_val; rtx ext_val; int benefit; rtx regnote = 0; rtx last_consec_insn; dest_reg = SET_DEST (set); if (REGNO (dest_reg) < FIRST_PSEUDO_REGISTER) return p; if (/* SET_SRC is a giv. */ (general_induction_var (loop, SET_SRC (set), &src_reg, &add_val, &mult_val, &ext_val, 0, &benefit, VOIDmode) /* Equivalent expression is a giv. */ || ((regnote = find_reg_note (p, REG_EQUAL, NULL_RTX)) && general_induction_var (loop, XEXP (regnote, 0), &src_reg, &add_val, &mult_val, &ext_val, 0, &benefit, VOIDmode))) /* Don't try to handle any regs made by loop optimization. We have nothing on them in regno_first_uid, etc. */ && REGNO (dest_reg) < max_reg_before_loop /* Don't recognize a BASIC_INDUCT_VAR here. */ && dest_reg != src_reg /* This must be the only place where the register is set. */ && (regs->array[REGNO (dest_reg)].n_times_set == 1 /* or all sets must be consecutive and make a giv. */ || (benefit = consec_sets_giv (loop, benefit, p, src_reg, dest_reg, &add_val, &mult_val, &ext_val, &last_consec_insn)))) { struct induction *v = xmalloc (sizeof (struct induction)); /* If this is a library call, increase benefit. */ if (find_reg_note (p, REG_RETVAL, NULL_RTX)) benefit += libcall_benefit (p); /* Skip the consecutive insns, if there are any. */ if (regs->array[REGNO (dest_reg)].n_times_set != 1) p = last_consec_insn; record_giv (loop, v, p, src_reg, dest_reg, mult_val, add_val, ext_val, benefit, DEST_REG, not_every_iteration, maybe_multiple, (rtx*) 0); } } /* Look for givs which are memory addresses. */ if (NONJUMP_INSN_P (p)) find_mem_givs (loop, PATTERN (p), p, not_every_iteration, maybe_multiple); /* Update the status of whether giv can derive other givs. This can change when we pass a label or an insn that updates a biv. */ if (INSN_P (p) || LABEL_P (p)) update_giv_derive (loop, p); return p; } /* Return 1 if X is a valid source for an initial value (or as value being compared against in an initial test). X must be either a register or constant and must not be clobbered between the current insn and the start of the loop. INSN is the insn containing X. */ static int valid_initial_value_p (rtx x, rtx insn, int call_seen, rtx loop_start) { if (CONSTANT_P (x)) return 1; /* Only consider pseudos we know about initialized in insns whose luids we know. */ if (!REG_P (x) || REGNO (x) >= max_reg_before_loop) return 0; /* Don't use call-clobbered registers across a call which clobbers it. On some machines, don't use any hard registers at all. */ if (REGNO (x) < FIRST_PSEUDO_REGISTER && (SMALL_REGISTER_CLASSES || (call_seen && call_used_regs[REGNO (x)]))) return 0; /* Don't use registers that have been clobbered before the start of the loop. */ if (reg_set_between_p (x, insn, loop_start)) return 0; return 1; } /* Scan X for memory refs and check each memory address as a possible giv. INSN is the insn whose pattern X comes from. NOT_EVERY_ITERATION is 1 if the insn might not be executed during every loop iteration. MAYBE_MULTIPLE is 1 if the insn might be executed more than once in each loop iteration. */ static void find_mem_givs (const struct loop *loop, rtx x, rtx insn, int not_every_iteration, int maybe_multiple) { int i, j; enum rtx_code code; const char *fmt; if (x == 0) return; code = GET_CODE (x); switch (code) { case REG: case CONST_INT: case CONST: case CONST_DOUBLE: case SYMBOL_REF: case LABEL_REF: case PC: case CC0: case ADDR_VEC: case ADDR_DIFF_VEC: case USE: case CLOBBER: return; case MEM: { rtx src_reg; rtx add_val; rtx mult_val; rtx ext_val; int benefit; /* This code used to disable creating GIVs with mult_val == 1 and add_val == 0. However, this leads to lost optimizations when it comes time to combine a set of related DEST_ADDR GIVs, since this one would not be seen. */ if (general_induction_var (loop, XEXP (x, 0), &src_reg, &add_val, &mult_val, &ext_val, 1, &benefit, GET_MODE (x))) { /* Found one; record it. */ struct induction *v = xmalloc (sizeof (struct induction)); record_giv (loop, v, insn, src_reg, addr_placeholder, mult_val, add_val, ext_val, benefit, DEST_ADDR, not_every_iteration, maybe_multiple, &XEXP (x, 0)); v->mem = x; } } return; default: break; } /* Recursively scan the subexpressions for other mem refs. */ fmt = GET_RTX_FORMAT (code); for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) if (fmt[i] == 'e') find_mem_givs (loop, XEXP (x, i), insn, not_every_iteration, maybe_multiple); else if (fmt[i] == 'E') for (j = 0; j < XVECLEN (x, i); j++) find_mem_givs (loop, XVECEXP (x, i, j), insn, not_every_iteration, maybe_multiple); } /* Fill in the data about one biv update. V is the `struct induction' in which we record the biv. (It is allocated by the caller, with alloca.) INSN is the insn that sets it. DEST_REG is the biv's reg. MULT_VAL is const1_rtx if the biv is being incremented here, in which case INC_VAL is the increment. Otherwise, MULT_VAL is const0_rtx and the biv is being set to INC_VAL. NOT_EVERY_ITERATION is nonzero if this biv update is not know to be executed every iteration; MAYBE_MULTIPLE is nonzero if this biv update can be executed more than once per iteration. If MAYBE_MULTIPLE and NOT_EVERY_ITERATION are both zero, we know that the biv update is executed exactly once per iteration. */ static void record_biv (struct loop *loop, struct induction *v, rtx insn, rtx dest_reg, rtx inc_val, rtx mult_val, rtx *location, int not_every_iteration, int maybe_multiple) { struct loop_ivs *ivs = LOOP_IVS (loop); struct iv_class *bl; v->insn = insn; v->src_reg = dest_reg; v->dest_reg = dest_reg; v->mult_val = mult_val; v->add_val = inc_val; v->ext_dependent = NULL_RTX; v->location = location; v->mode = GET_MODE (dest_reg); v->always_computable = ! not_every_iteration; v->always_executed = ! not_every_iteration; v->maybe_multiple = maybe_multiple; v->same = 0; /* Add this to the reg's iv_class, creating a class if this is the first incrementation of the reg. */ bl = REG_IV_CLASS (ivs, REGNO (dest_reg)); if (bl == 0) { /* Create and initialize new iv_class. */ bl = xmalloc (sizeof (struct iv_class)); bl->regno = REGNO (dest_reg); bl->biv = 0; bl->giv = 0; bl->biv_count = 0; bl->giv_count = 0; /* Set initial value to the reg itself. */ bl->initial_value = dest_reg; bl->final_value = 0; /* We haven't seen the initializing insn yet. */ bl->init_insn = 0; bl->init_set = 0; bl->initial_test = 0; bl->incremented = 0; bl->eliminable = 0; bl->nonneg = 0; bl->reversed = 0; bl->total_benefit = 0; /* Add this class to ivs->list. */ bl->next = ivs->list; ivs->list = bl; /* Put it in the array of biv register classes. */ REG_IV_CLASS (ivs, REGNO (dest_reg)) = bl; } else { /* Check if location is the same as a previous one. */ struct induction *induction; for (induction = bl->biv; induction; induction = induction->next_iv) if (location == induction->location) { v->same = induction; break; } } /* Update IV_CLASS entry for this biv. */ v->next_iv = bl->biv; bl->biv = v; bl->biv_count++; if (mult_val == const1_rtx) bl->incremented = 1; if (loop_dump_stream) loop_biv_dump (v, loop_dump_stream, 0); } /* Fill in the data about one giv. V is the `struct induction' in which we record the giv. (It is allocated by the caller, with alloca.) INSN is the insn that sets it. BENEFIT estimates the savings from deleting this insn. TYPE is DEST_REG or DEST_ADDR; it says whether the giv is computed into a register or is used as a memory address. SRC_REG is the biv reg which the giv is computed from. DEST_REG is the giv's reg (if the giv is stored in a reg). MULT_VAL and ADD_VAL are the coefficients used to compute the giv. LOCATION points to the place where this giv's value appears in INSN. */ static void record_giv (const struct loop *loop, struct induction *v, rtx insn, rtx src_reg, rtx dest_reg, rtx mult_val, rtx add_val, rtx ext_val, int benefit, enum g_types type, int not_every_iteration, int maybe_multiple, rtx *location) { struct loop_ivs *ivs = LOOP_IVS (loop); struct induction *b; struct iv_class *bl; rtx set = single_set (insn); rtx temp; /* Attempt to prove constantness of the values. Don't let simplify_rtx undo the MULT canonicalization that we performed earlier. */ temp = simplify_rtx (add_val); if (temp && ! (GET_CODE (add_val) == MULT && GET_CODE (temp) == ASHIFT)) add_val = temp; v->insn = insn; v->src_reg = src_reg; v->giv_type = type; v->dest_reg = dest_reg; v->mult_val = mult_val; v->add_val = add_val; v->ext_dependent = ext_val; v->benefit = benefit; v->location = location; v->cant_derive = 0; v->combined_with = 0; v->maybe_multiple = maybe_multiple; v->maybe_dead = 0; v->derive_adjustment = 0; v->same = 0; v->ignore = 0; v->new_reg = 0; v->final_value = 0; v->same_insn = 0; v->auto_inc_opt = 0; v->shared = 0; /* The v->always_computable field is used in update_giv_derive, to determine whether a giv can be used to derive another giv. For a DEST_REG giv, INSN computes a new value for the giv, so its value isn't computable if INSN insn't executed every iteration. However, for a DEST_ADDR giv, INSN merely uses the value of the giv; it does not compute a new value. Hence the value is always computable regardless of whether INSN is executed each iteration. */ if (type == DEST_ADDR) v->always_computable = 1; else v->always_computable = ! not_every_iteration; v->always_executed = ! not_every_iteration; if (type == DEST_ADDR) { v->mode = GET_MODE (*location); v->lifetime = 1; } else /* type == DEST_REG */ { v->mode = GET_MODE (SET_DEST (set)); v->lifetime = LOOP_REG_LIFETIME (loop, REGNO (dest_reg)); /* If the lifetime is zero, it means that this register is really a dead store. So mark this as a giv that can be ignored. This will not prevent the biv from being eliminated. */ if (v->lifetime == 0) v->ignore = 1; REG_IV_TYPE (ivs, REGNO (dest_reg)) = GENERAL_INDUCT; REG_IV_INFO (ivs, REGNO (dest_reg)) = v; } /* Add the giv to the class of givs computed from one biv. */ bl = REG_IV_CLASS (ivs, REGNO (src_reg)); gcc_assert (bl); v->next_iv = bl->giv; bl->giv = v; /* Don't count DEST_ADDR. This is supposed to count the number of insns that calculate givs. */ if (type == DEST_REG) bl->giv_count++; bl->total_benefit += benefit; if (type == DEST_ADDR) { v->replaceable = 1; v->not_replaceable = 0; } else { /* The giv can be replaced outright by the reduced register only if all of the following conditions are true: - the insn that sets the giv is always executed on any iteration on which the giv is used at all (there are two ways to deduce this: either the insn is executed on every iteration, or all uses follow that insn in the same basic block), - the giv is not used outside the loop - no assignments to the biv occur during the giv's lifetime. */ if (REGNO_FIRST_UID (REGNO (dest_reg)) == INSN_UID (insn) /* Previous line always fails if INSN was moved by loop opt. */ && REGNO_LAST_LUID (REGNO (dest_reg)) < INSN_LUID (loop->end) && (! not_every_iteration || last_use_this_basic_block (dest_reg, insn))) { /* Now check that there are no assignments to the biv within the giv's lifetime. This requires two separate checks. */ /* Check each biv update, and fail if any are between the first and last use of the giv. If this loop contains an inner loop that was unrolled, then the insn modifying the biv may have been emitted by the loop unrolling code, and hence does not have a valid luid. Just mark the biv as not replaceable in this case. It is not very useful as a biv, because it is used in two different loops. It is very unlikely that we would be able to optimize the giv using this biv anyways. */ v->replaceable = 1; v->not_replaceable = 0; for (b = bl->biv; b; b = b->next_iv) { if (INSN_UID (b->insn) >= max_uid_for_loop || ((INSN_LUID (b->insn) >= REGNO_FIRST_LUID (REGNO (dest_reg))) && (INSN_LUID (b->insn) <= REGNO_LAST_LUID (REGNO (dest_reg))))) { v->replaceable = 0; v->not_replaceable = 1; break; } } /* If there are any backwards branches that go from after the biv update to before it, then this giv is not replaceable. */ if (v->replaceable) for (b = bl->biv; b; b = b->next_iv) if (back_branch_in_range_p (loop, b->insn)) { v->replaceable = 0; v->not_replaceable = 1; break; } } else { /* May still be replaceable, we don't have enough info here to decide. */ v->replaceable = 0; v->not_replaceable = 0; } } /* Record whether the add_val contains a const_int, for later use by combine_givs. */ { rtx tem = add_val; v->no_const_addval = 1; if (tem == const0_rtx) ; else if (CONSTANT_P (add_val)) v->no_const_addval = 0; if (GET_CODE (tem) == PLUS) { while (1) { if (GET_CODE (XEXP (tem, 0)) == PLUS) tem = XEXP (tem, 0); else if (GET_CODE (XEXP (tem, 1)) == PLUS) tem = XEXP (tem, 1); else break; } if (CONSTANT_P (XEXP (tem, 1))) v->no_const_addval = 0; } } if (loop_dump_stream) loop_giv_dump (v, loop_dump_stream, 0); } /* Try to calculate the final value of the giv, the value it will have at the end of the loop. If we can do it, return that value. */ static rtx final_giv_value (const struct loop *loop, struct induction *v) { struct loop_ivs *ivs = LOOP_IVS (loop); struct iv_class *bl; rtx insn; rtx increment, tem; rtx seq; rtx loop_end = loop->end; unsigned HOST_WIDE_INT n_iterations = LOOP_INFO (loop)->n_iterations; bl = REG_IV_CLASS (ivs, REGNO (v->src_reg)); /* The final value for givs which depend on reversed bivs must be calculated differently than for ordinary givs. In this case, there is already an insn after the loop which sets this giv's final value (if necessary), and there are no other loop exits, so we can return any value. */ if (bl->reversed) { if (loop_dump_stream) fprintf (loop_dump_stream, "Final giv value for %d, depends on reversed biv\n", REGNO (v->dest_reg)); return const0_rtx; } /* Try to calculate the final value as a function of the biv it depends upon. The only exit from the loop must be the fall through at the bottom and the insn that sets the giv must be executed on every iteration (otherwise the giv may not have its final value when the loop exits). */ /* ??? Can calculate the final giv value by subtracting off the extra biv increments times the giv's mult_val. The loop must have only one exit for this to work, but the loop iterations does not need to be known. */ if (n_iterations != 0 && ! loop->exit_count && v->always_executed) { /* ?? It is tempting to use the biv's value here since these insns will be put after the loop, and hence the biv will have its final value then. However, this fails if the biv is subsequently eliminated. Perhaps determine whether biv's are eliminable before trying to determine whether giv's are replaceable so that we can use the biv value here if it is not eliminable. */ /* We are emitting code after the end of the loop, so we must make sure that bl->initial_value is still valid then. It will still be valid if it is invariant. */ increment = biv_total_increment (bl); if (increment && loop_invariant_p (loop, increment) && loop_invariant_p (loop, bl->initial_value)) { /* Can calculate the loop exit value of its biv as (n_iterations * increment) + initial_value */ /* The loop exit value of the giv is then (final_biv_value - extra increments) * mult_val + add_val. The extra increments are any increments to the biv which occur in the loop after the giv's value is calculated. We must search from the insn that sets the giv to the end of the loop to calculate this value. */ /* Put the final biv value in tem. */ tem = gen_reg_rtx (v->mode); record_base_value (REGNO (tem), bl->biv->add_val, 0); loop_iv_add_mult_sink (loop, extend_value_for_giv (v, increment), GEN_INT (n_iterations), extend_value_for_giv (v, bl->initial_value), tem); /* Subtract off extra increments as we find them. */ for (insn = NEXT_INSN (v->insn); insn != loop_end; insn = NEXT_INSN (insn)) { struct induction *biv; for (biv = bl->biv; biv; biv = biv->next_iv) if (biv->insn == insn) { start_sequence (); tem = expand_simple_binop (GET_MODE (tem), MINUS, tem, biv->add_val, NULL_RTX, 0, OPTAB_LIB_WIDEN); seq = get_insns (); end_sequence (); loop_insn_sink (loop, seq); } } /* Now calculate the giv's final value. */ loop_iv_add_mult_sink (loop, tem, v->mult_val, v->add_val, tem); if (loop_dump_stream) fprintf (loop_dump_stream, "Final giv value for %d, calc from biv's value.\n", REGNO (v->dest_reg)); return tem; } } /* Replaceable giv's should never reach here. */ gcc_assert (!v->replaceable); /* Check to see if the biv is dead at all loop exits. */ if (reg_dead_after_loop (loop, v->dest_reg)) { if (loop_dump_stream) fprintf (loop_dump_stream, "Final giv value for %d, giv dead after loop exit.\n", REGNO (v->dest_reg)); return const0_rtx; } return 0; } /* All this does is determine whether a giv can be made replaceable because its final value can be calculated. This code can not be part of record_giv above, because final_giv_value requires that the number of loop iterations be known, and that can not be accurately calculated until after all givs have been identified. */ static void check_final_value (const struct loop *loop, struct induction *v) { rtx final_value = 0; /* DEST_ADDR givs will never reach here, because they are always marked replaceable above in record_giv. */ /* The giv can be replaced outright by the reduced register only if all of the following conditions are true: - the insn that sets the giv is always executed on any iteration on which the giv is used at all (there are two ways to deduce this: either the insn is executed on every iteration, or all uses follow that insn in the same basic block), - its final value can be calculated (this condition is different than the one above in record_giv) - it's not used before the it's set - no assignments to the biv occur during the giv's lifetime. */ #if 0 /* This is only called now when replaceable is known to be false. */ /* Clear replaceable, so that it won't confuse final_giv_value. */ v->replaceable = 0; #endif if ((final_value = final_giv_value (loop, v)) && (v->always_executed || last_use_this_basic_block (v->dest_reg, v->insn))) { int biv_increment_seen = 0, before_giv_insn = 0; rtx p = v->insn; rtx last_giv_use; v->replaceable = 1; v->not_replaceable = 0; /* When trying to determine whether or not a biv increment occurs during the lifetime of the giv, we can ignore uses of the variable outside the loop because final_value is true. Hence we can not use regno_last_uid and regno_first_uid as above in record_giv. */ /* Search the loop to determine whether any assignments to the biv occur during the giv's lifetime. Start with the insn that sets the giv, and search around the loop until we come back to that insn again. Also fail if there is a jump within the giv's lifetime that jumps to somewhere outside the lifetime but still within the loop. This catches spaghetti code where the execution order is not linear, and hence the above test fails. Here we assume that the giv lifetime does not extend from one iteration of the loop to the next, so as to make the test easier. Since the lifetime isn't known yet, this requires two loops. See also record_giv above. */ last_giv_use = v->insn; while (1) { p = NEXT_INSN (p); if (p == loop->end) { before_giv_insn = 1; p = NEXT_INSN (loop->start); } if (p == v->insn) break; if (INSN_P (p)) { /* It is possible for the BIV increment to use the GIV if we have a cycle. Thus we must be sure to check each insn for both BIV and GIV uses, and we must check for BIV uses first. */ if (! biv_increment_seen && reg_set_p (v->src_reg, PATTERN (p))) biv_increment_seen = 1; if (reg_mentioned_p (v->dest_reg, PATTERN (p))) { if (biv_increment_seen || before_giv_insn) { v->replaceable = 0; v->not_replaceable = 1; break; } last_giv_use = p; } } } /* Now that the lifetime of the giv is known, check for branches from within the lifetime to outside the lifetime if it is still replaceable. */ if (v->replaceable) { p = v->insn; while (1) { p = NEXT_INSN (p); if (p == loop->end) p = NEXT_INSN (loop->start); if (p == last_giv_use) break; if (JUMP_P (p) && JUMP_LABEL (p) && LABEL_NAME (JUMP_LABEL (p)) && ((loop_insn_first_p (JUMP_LABEL (p), v->insn) && loop_insn_first_p (loop->start, JUMP_LABEL (p))) || (loop_insn_first_p (last_giv_use, JUMP_LABEL (p)) && loop_insn_first_p (JUMP_LABEL (p), loop->end)))) { v->replaceable = 0; v->not_replaceable = 1; if (loop_dump_stream) fprintf (loop_dump_stream, "Found branch outside giv lifetime.\n"); break; } } } /* If it is replaceable, then save the final value. */ if (v->replaceable) v->final_value = final_value; } if (loop_dump_stream && v->replaceable) fprintf (loop_dump_stream, "Insn %d: giv reg %d final_value replaceable\n", INSN_UID (v->insn), REGNO (v->dest_reg)); } /* Update the status of whether a giv can derive other givs. We need to do something special if there is or may be an update to the biv between the time the giv is defined and the time it is used to derive another giv. In addition, a giv that is only conditionally set is not allowed to derive another giv once a label has been passed. The cases we look at are when a label or an update to a biv is passed. */ static void update_giv_derive (const struct loop *loop, rtx p) { struct loop_ivs *ivs = LOOP_IVS (loop); struct iv_class *bl; struct induction *biv, *giv; rtx tem; int dummy; /* Search all IV classes, then all bivs, and finally all givs. There are three cases we are concerned with. First we have the situation of a giv that is only updated conditionally. In that case, it may not derive any givs after a label is passed. The second case is when a biv update occurs, or may occur, after the definition of a giv. For certain biv updates (see below) that are known to occur between the giv definition and use, we can adjust the giv definition. For others, or when the biv update is conditional, we must prevent the giv from deriving any other givs. There are two sub-cases within this case. If this is a label, we are concerned with any biv update that is done conditionally, since it may be done after the giv is defined followed by a branch here (actually, we need to pass both a jump and a label, but this extra tracking doesn't seem worth it). If this is a jump, we are concerned about any biv update that may be executed multiple times. We are actually only concerned about backward jumps, but it is probably not worth performing the test on the jump again here. If this is a biv update, we must adjust the giv status to show that a subsequent biv update was performed. If this adjustment cannot be done, the giv cannot derive further givs. */ for (bl = ivs->list; bl; bl = bl->next) for (biv = bl->biv; biv; biv = biv->next_iv) if (LABEL_P (p) || JUMP_P (p) || biv->insn == p) { /* Skip if location is the same as a previous one. */ if (biv->same) continue; for (giv = bl->giv; giv; giv = giv->next_iv) { /* If cant_derive is already true, there is no point in checking all of these conditions again. */ if (giv->cant_derive) continue; /* If this giv is conditionally set and we have passed a label, it cannot derive anything. */ if (LABEL_P (p) && ! giv->always_computable) giv->cant_derive = 1; /* Skip givs that have mult_val == 0, since they are really invariants. Also skip those that are replaceable, since we know their lifetime doesn't contain any biv update. */ else if (giv->mult_val == const0_rtx || giv->replaceable) continue; /* The only way we can allow this giv to derive another is if this is a biv increment and we can form the product of biv->add_val and giv->mult_val. In this case, we will be able to compute a compensation. */ else if (biv->insn == p) { rtx ext_val_dummy; tem = 0; if (biv->mult_val == const1_rtx) tem = simplify_giv_expr (loop, gen_rtx_MULT (giv->mode, biv->add_val, giv->mult_val), &ext_val_dummy, &dummy); if (tem && giv->derive_adjustment) tem = simplify_giv_expr (loop, gen_rtx_PLUS (giv->mode, tem, giv->derive_adjustment), &ext_val_dummy, &dummy); if (tem) giv->derive_adjustment = tem; else giv->cant_derive = 1; } else if ((LABEL_P (p) && ! biv->always_computable) || (JUMP_P (p) && biv->maybe_multiple)) giv->cant_derive = 1; } } } /* Check whether an insn is an increment legitimate for a basic induction var. X is the source of insn P, or a part of it. MODE is the mode in which X should be interpreted. DEST_REG is the putative biv, also the destination of the insn. We accept patterns of these forms: REG = REG + INVARIANT (includes REG = REG - CONSTANT) REG = INVARIANT + REG If X is suitable, we return 1, set *MULT_VAL to CONST1_RTX, store the additive term into *INC_VAL, and store the place where we found the additive term into *LOCATION. If X is an assignment of an invariant into DEST_REG, we set *MULT_VAL to CONST0_RTX, and store the invariant into *INC_VAL. We also want to detect a BIV when it corresponds to a variable whose mode was promoted. In that case, an increment of the variable may be a PLUS that adds a SUBREG of that variable to an invariant and then sign- or zero-extends the result of the PLUS into the variable. Most GIVs in such cases will be in the promoted mode, since that is the probably the natural computation mode (and almost certainly the mode used for addresses) on the machine. So we view the pseudo-reg containing the variable as the BIV, as if it were simply incremented. Note that treating the entire pseudo as a BIV will result in making simple increments to any GIVs based on it. However, if the variable overflows in its declared mode but not its promoted mode, the result will be incorrect. This is acceptable if the variable is signed, since overflows in such cases are undefined, but not if it is unsigned, since those overflows are defined. So we only check for SIGN_EXTEND and not ZERO_EXTEND. If we cannot find a biv, we return 0. */ static int basic_induction_var (const struct loop *loop, rtx x, enum machine_mode mode, rtx dest_reg, rtx p, rtx *inc_val, rtx *mult_val, rtx **location) { enum rtx_code code; rtx *argp, arg; rtx insn, set = 0, last, inc; code = GET_CODE (x); *location = NULL; switch (code) { case PLUS: if (rtx_equal_p (XEXP (x, 0), dest_reg) || (GET_CODE (XEXP (x, 0)) == SUBREG && SUBREG_PROMOTED_VAR_P (XEXP (x, 0)) && SUBREG_REG (XEXP (x, 0)) == dest_reg)) { argp = &XEXP (x, 1); } else if (rtx_equal_p (XEXP (x, 1), dest_reg) || (GET_CODE (XEXP (x, 1)) == SUBREG && SUBREG_PROMOTED_VAR_P (XEXP (x, 1)) && SUBREG_REG (XEXP (x, 1)) == dest_reg)) { argp = &XEXP (x, 0); } else return 0; arg = *argp; if (loop_invariant_p (loop, arg) != 1) return 0; /* convert_modes can emit new instructions, e.g. when arg is a loop invariant MEM and dest_reg has a different mode. These instructions would be emitted after the end of the function and then *inc_val would be an uninitialized pseudo. Detect this and bail in this case. Other alternatives to solve this can be introducing a convert_modes variant which is allowed to fail but not allowed to emit new instructions, emit these instructions before loop start and let it be garbage collected if *inc_val is never used or saving the *inc_val initialization sequence generated here and when *inc_val is going to be actually used, emit it at some suitable place. */ last = get_last_insn (); inc = convert_modes (GET_MODE (dest_reg), GET_MODE (x), arg, 0); if (get_last_insn () != last) { delete_insns_since (last); return 0; } *inc_val = inc; *mult_val = const1_rtx; *location = argp; return 1; case SUBREG: /* If what's inside the SUBREG is a BIV, then the SUBREG. This will handle addition of promoted variables. ??? The comment at the start of this function is wrong: promoted variable increments don't look like it says they do. */ return basic_induction_var (loop, SUBREG_REG (x), GET_MODE (SUBREG_REG (x)), dest_reg, p, inc_val, mult_val, location); case REG: /* If this register is assigned in a previous insn, look at its source, but don't go outside the loop or past a label. */ /* If this sets a register to itself, we would repeat any previous biv increment if we applied this strategy blindly. */ if (rtx_equal_p (dest_reg, x)) return 0; insn = p; while (1) { rtx dest; do { insn = PREV_INSN (insn); } while (insn && NOTE_P (insn) && NOTE_LINE_NUMBER (insn) != NOTE_INSN_LOOP_BEG); if (!insn) break; set = single_set (insn); if (set == 0) break; dest = SET_DEST (set); if (dest == x || (GET_CODE (dest) == SUBREG && (GET_MODE_SIZE (GET_MODE (dest)) <= UNITS_PER_WORD) && (GET_MODE_CLASS (GET_MODE (dest)) == MODE_INT) && SUBREG_REG (dest) == x)) return basic_induction_var (loop, SET_SRC (set), (GET_MODE (SET_SRC (set)) == VOIDmode ? GET_MODE (x) : GET_MODE (SET_SRC (set))), dest_reg, insn, inc_val, mult_val, location); while (GET_CODE (dest) == SUBREG || GET_CODE (dest) == ZERO_EXTRACT || GET_CODE (dest) == STRICT_LOW_PART) dest = XEXP (dest, 0); if (dest == x) break; } /* Fall through. */ /* Can accept constant setting of biv only when inside inner most loop. Otherwise, a biv of an inner loop may be incorrectly recognized as a biv of the outer loop, causing code to be moved INTO the inner loop. */ case MEM: if (loop_invariant_p (loop, x) != 1) return 0; case CONST_INT: case SYMBOL_REF: case CONST: /* convert_modes dies if we try to convert to or from CCmode, so just exclude that case. It is very unlikely that a condition code value would be a useful iterator anyways. convert_modes dies if we try to convert a float mode to non-float or vice versa too. */ if (loop->level == 1 && GET_MODE_CLASS (mode) == GET_MODE_CLASS (GET_MODE (dest_reg)) && GET_MODE_CLASS (mode) != MODE_CC) { /* Possible bug here? Perhaps we don't know the mode of X. */ last = get_last_insn (); inc = convert_modes (GET_MODE (dest_reg), mode, x, 0); if (get_last_insn () != last) { delete_insns_since (last); return 0; } *inc_val = inc; *mult_val = const0_rtx; return 1; } else return 0; case SIGN_EXTEND: /* Ignore this BIV if signed arithmetic overflow is defined. */ if (flag_wrapv) return 0; return basic_induction_var (loop, XEXP (x, 0), GET_MODE (XEXP (x, 0)), dest_reg, p, inc_val, mult_val, location); case ASHIFTRT: /* Similar, since this can be a sign extension. */ for (insn = PREV_INSN (p); (insn && NOTE_P (insn) && NOTE_LINE_NUMBER (insn) != NOTE_INSN_LOOP_BEG); insn = PREV_INSN (insn)) ; if (insn) set = single_set (insn); if (! rtx_equal_p (dest_reg, XEXP (x, 0)) && set && SET_DEST (set) == XEXP (x, 0) && GET_CODE (XEXP (x, 1)) == CONST_INT && INTVAL (XEXP (x, 1)) >= 0 && GET_CODE (SET_SRC (set)) == ASHIFT && XEXP (x, 1) == XEXP (SET_SRC (set), 1)) return basic_induction_var (loop, XEXP (SET_SRC (set), 0), GET_MODE (XEXP (x, 0)), dest_reg, insn, inc_val, mult_val, location); return 0; default: return 0; } } /* A general induction variable (giv) is any quantity that is a linear function of a basic induction variable, i.e. giv = biv * mult_val + add_val. The coefficients can be any loop invariant quantity. A giv need not be computed directly from the biv; it can be computed by way of other givs. */ /* Determine whether X computes a giv. If it does, return a nonzero value which is the benefit from eliminating the computation of X; set *SRC_REG to the register of the biv that it is computed from; set *ADD_VAL and *MULT_VAL to the coefficients, such that the value of X is biv * mult + add; */ static int general_induction_var (const struct loop *loop, rtx x, rtx *src_reg, rtx *add_val, rtx *mult_val, rtx *ext_val, int is_addr, int *pbenefit, enum machine_mode addr_mode) { struct loop_ivs *ivs = LOOP_IVS (loop); rtx orig_x = x; /* If this is an invariant, forget it, it isn't a giv. */ if (loop_invariant_p (loop, x) == 1) return 0; *pbenefit = 0; *ext_val = NULL_RTX; x = simplify_giv_expr (loop, x, ext_val, pbenefit); if (x == 0) return 0; switch (GET_CODE (x)) { case USE: case CONST_INT: /* Since this is now an invariant and wasn't before, it must be a giv with MULT_VAL == 0. It doesn't matter which BIV we associate this with. */ *src_reg = ivs->list->biv->dest_reg; *mult_val = const0_rtx; *add_val = x; break; case REG: /* This is equivalent to a BIV. */ *src_reg = x; *mult_val = const1_rtx; *add_val = const0_rtx; break; case PLUS: /* Either (plus (biv) (invar)) or (plus (mult (biv) (invar_1)) (invar_2)). */ if (GET_CODE (XEXP (x, 0)) == MULT) { *src_reg = XEXP (XEXP (x, 0), 0); *mult_val = XEXP (XEXP (x, 0), 1); } else { *src_reg = XEXP (x, 0); *mult_val = const1_rtx; } *add_val = XEXP (x, 1); break; case MULT: /* ADD_VAL is zero. */ *src_reg = XEXP (x, 0); *mult_val = XEXP (x, 1); *add_val = const0_rtx; break; default: gcc_unreachable (); } /* Remove any enclosing USE from ADD_VAL and MULT_VAL (there will be unless they are CONST_INT). */ if (GET_CODE (*add_val) == USE) *add_val = XEXP (*add_val, 0); if (GET_CODE (*mult_val) == USE) *mult_val = XEXP (*mult_val, 0); if (is_addr) *pbenefit += address_cost (orig_x, addr_mode) - reg_address_cost; else *pbenefit += rtx_cost (orig_x, SET); /* Always return true if this is a giv so it will be detected as such, even if the benefit is zero or negative. This allows elimination of bivs that might otherwise not be eliminated. */ return 1; } /* Given an expression, X, try to form it as a linear function of a biv. We will canonicalize it to be of the form (plus (mult (BIV) (invar_1)) (invar_2)) with possible degeneracies. The invariant expressions must each be of a form that can be used as a machine operand. We surround then with a USE rtx (a hack, but localized and certainly unambiguous!) if not a CONST_INT for simplicity in this routine; it is the caller's responsibility to strip them. If no such canonicalization is possible (i.e., two biv's are used or an expression that is neither invariant nor a biv or giv), this routine returns 0. For a nonzero return, the result will have a code of CONST_INT, USE, REG (for a BIV), PLUS, or MULT. No other codes will occur. *BENEFIT will be incremented by the benefit of any sub-giv encountered. */ static rtx sge_plus (enum machine_mode, rtx, rtx); static rtx sge_plus_constant (rtx, rtx); static rtx simplify_giv_expr (const struct loop *loop, rtx x, rtx *ext_val, int *benefit) { struct loop_ivs *ivs = LOOP_IVS (loop); struct loop_regs *regs = LOOP_REGS (loop); enum machine_mode mode = GET_MODE (x); rtx arg0, arg1; rtx tem; /* If this is not an integer mode, or if we cannot do arithmetic in this mode, this can't be a giv. */ if (mode != VOIDmode && (GET_MODE_CLASS (mode) != MODE_INT || GET_MODE_BITSIZE (mode) > HOST_BITS_PER_WIDE_INT)) return NULL_RTX; switch (GET_CODE (x)) { case PLUS: arg0 = simplify_giv_expr (loop, XEXP (x, 0), ext_val, benefit); arg1 = simplify_giv_expr (loop, XEXP (x, 1), ext_val, benefit); if (arg0 == 0 || arg1 == 0) return NULL_RTX; /* Put constant last, CONST_INT last if both constant. */ if ((GET_CODE (arg0) == USE || GET_CODE (arg0) == CONST_INT) && ! ((GET_CODE (arg0) == USE && GET_CODE (arg1) == USE) || GET_CODE (arg1) == CONST_INT)) tem = arg0, arg0 = arg1, arg1 = tem; /* Handle addition of zero, then addition of an invariant. */ if (arg1 == const0_rtx) return arg0; else if (GET_CODE (arg1) == CONST_INT || GET_CODE (arg1) == USE) switch (GET_CODE (arg0)) { case CONST_INT: case USE: /* Adding two invariants must result in an invariant, so enclose addition operation inside a USE and return it. */ if (GET_CODE (arg0) == USE) arg0 = XEXP (arg0, 0); if (GET_CODE (arg1) == USE) arg1 = XEXP (arg1, 0); if (GET_CODE (arg0) == CONST_INT) tem = arg0, arg0 = arg1, arg1 = tem; if (GET_CODE (arg1) == CONST_INT) tem = sge_plus_constant (arg0, arg1); else tem = sge_plus (mode, arg0, arg1); if (GET_CODE (tem) != CONST_INT) tem = gen_rtx_USE (mode, tem); return tem; case REG: case MULT: /* biv + invar or mult + invar. Return sum. */ return gen_rtx_PLUS (mode, arg0, arg1); case PLUS: /* (a + invar_1) + invar_2. Associate. */ return simplify_giv_expr (loop, gen_rtx_PLUS (mode, XEXP (arg0, 0), gen_rtx_PLUS (mode, XEXP (arg0, 1), arg1)), ext_val, benefit); default: gcc_unreachable (); } /* Each argument must be either REG, PLUS, or MULT. Convert REG to MULT to reduce cases. */ if (REG_P (arg0)) arg0 = gen_rtx_MULT (mode, arg0, const1_rtx); if (REG_P (arg1)) arg1 = gen_rtx_MULT (mode, arg1, const1_rtx); /* Now have PLUS + PLUS, PLUS + MULT, MULT + PLUS, or MULT + MULT. Put a MULT first, leaving PLUS + PLUS, MULT + PLUS, or MULT + MULT. Recurse to associate the second PLUS. */ if (GET_CODE (arg1) == MULT) tem = arg0, arg0 = arg1, arg1 = tem; if (GET_CODE (arg1) == PLUS) return simplify_giv_expr (loop, gen_rtx_PLUS (mode, gen_rtx_PLUS (mode, arg0, XEXP (arg1, 0)), XEXP (arg1, 1)), ext_val, benefit); /* Now must have MULT + MULT. Distribute if same biv, else not giv. */ if (GET_CODE (arg0) != MULT || GET_CODE (arg1) != MULT) return NULL_RTX; if (!rtx_equal_p (arg0, arg1)) return NULL_RTX; return simplify_giv_expr (loop, gen_rtx_MULT (mode, XEXP (arg0, 0), gen_rtx_PLUS (mode, XEXP (arg0, 1), XEXP (arg1, 1))), ext_val, benefit); case MINUS: /* Handle "a - b" as "a + b * (-1)". */ return simplify_giv_expr (loop, gen_rtx_PLUS (mode, XEXP (x, 0), gen_rtx_MULT (mode, XEXP (x, 1), constm1_rtx)), ext_val, benefit); case MULT: arg0 = simplify_giv_expr (loop, XEXP (x, 0), ext_val, benefit); arg1 = simplify_giv_expr (loop, XEXP (x, 1), ext_val, benefit); if (arg0 == 0 || arg1 == 0) return NULL_RTX; /* Put constant last, CONST_INT last if both constant. */ if ((GET_CODE (arg0) == USE || GET_CODE (arg0) == CONST_INT) && GET_CODE (arg1) != CONST_INT) tem = arg0, arg0 = arg1, arg1 = tem; /* If second argument is not now constant, not giv. */ if (GET_CODE (arg1) != USE && GET_CODE (arg1) != CONST_INT) return NULL_RTX; /* Handle multiply by 0 or 1. */ if (arg1 == const0_rtx) return const0_rtx; else if (arg1 == const1_rtx) return arg0; switch (GET_CODE (arg0)) { case REG: /* biv * invar. Done. */ return gen_rtx_MULT (mode, arg0, arg1); case CONST_INT: /* Product of two constants. */ return GEN_INT (INTVAL (arg0) * INTVAL (arg1)); case USE: /* invar * invar is a giv, but attempt to simplify it somehow. */ if (GET_CODE (arg1) != CONST_INT) return NULL_RTX; arg0 = XEXP (arg0, 0); if (GET_CODE (arg0) == MULT) { /* (invar_0 * invar_1) * invar_2. Associate. */ return simplify_giv_expr (loop, gen_rtx_MULT (mode, XEXP (arg0, 0), gen_rtx_MULT (mode, XEXP (arg0, 1), arg1)), ext_val, benefit); } /* Propagate the MULT expressions to the innermost nodes. */ else if (GET_CODE (arg0) == PLUS) { /* (invar_0 + invar_1) * invar_2. Distribute. */ return simplify_giv_expr (loop, gen_rtx_PLUS (mode, gen_rtx_MULT (mode, XEXP (arg0, 0), arg1), gen_rtx_MULT (mode, XEXP (arg0, 1), arg1)), ext_val, benefit); } return gen_rtx_USE (mode, gen_rtx_MULT (mode, arg0, arg1)); case MULT: /* (a * invar_1) * invar_2. Associate. */ return simplify_giv_expr (loop, gen_rtx_MULT (mode, XEXP (arg0, 0), gen_rtx_MULT (mode, XEXP (arg0, 1), arg1)), ext_val, benefit); case PLUS: /* (a + invar_1) * invar_2. Distribute. */ return simplify_giv_expr (loop, gen_rtx_PLUS (mode, gen_rtx_MULT (mode, XEXP (arg0, 0), arg1), gen_rtx_MULT (mode, XEXP (arg0, 1), arg1)), ext_val, benefit); default: gcc_unreachable (); } case ASHIFT: /* Shift by constant is multiply by power of two. */ if (GET_CODE (XEXP (x, 1)) != CONST_INT) return 0; return simplify_giv_expr (loop, gen_rtx_MULT (mode, XEXP (x, 0), GEN_INT ((HOST_WIDE_INT) 1 << INTVAL (XEXP (x, 1)))), ext_val, benefit); case NEG: /* "-a" is "a * (-1)" */ return simplify_giv_expr (loop, gen_rtx_MULT (mode, XEXP (x, 0), constm1_rtx), ext_val, benefit); case NOT: /* "~a" is "-a - 1". Silly, but easy. */ return simplify_giv_expr (loop, gen_rtx_MINUS (mode, gen_rtx_NEG (mode, XEXP (x, 0)), const1_rtx), ext_val, benefit); case USE: /* Already in proper form for invariant. */ return x; case SIGN_EXTEND: case ZERO_EXTEND: case TRUNCATE: /* Conditionally recognize extensions of simple IVs. After we've computed loop traversal counts and verified the range of the source IV, we'll reevaluate this as a GIV. */ if (*ext_val == NULL_RTX) { arg0 = simplify_giv_expr (loop, XEXP (x, 0), ext_val, benefit); if (arg0 && *ext_val == NULL_RTX && REG_P (arg0)) { *ext_val = gen_rtx_fmt_e (GET_CODE (x), mode, arg0); return arg0; } } goto do_default; case REG: /* If this is a new register, we can't deal with it. */ if (REGNO (x) >= max_reg_before_loop) return 0; /* Check for biv or giv. */ switch (REG_IV_TYPE (ivs, REGNO (x))) { case BASIC_INDUCT: return x; case GENERAL_INDUCT: { struct induction *v = REG_IV_INFO (ivs, REGNO (x)); /* Form expression from giv and add benefit. Ensure this giv can derive another and subtract any needed adjustment if so. */ /* Increasing the benefit here is risky. The only case in which it is arguably correct is if this is the only use of V. In other cases, this will artificially inflate the benefit of the current giv, and lead to suboptimal code. Thus, it is disabled, since potentially not reducing an only marginally beneficial giv is less harmful than reducing many givs that are not really beneficial. */ { rtx single_use = regs->array[REGNO (x)].single_usage; if (single_use && single_use != const0_rtx) *benefit += v->benefit; } if (v->cant_derive) return 0; tem = gen_rtx_PLUS (mode, gen_rtx_MULT (mode, v->src_reg, v->mult_val), v->add_val); if (v->derive_adjustment) tem = gen_rtx_MINUS (mode, tem, v->derive_adjustment); arg0 = simplify_giv_expr (loop, tem, ext_val, benefit); if (*ext_val) { if (!v->ext_dependent) return arg0; } else { *ext_val = v->ext_dependent; return arg0; } return 0; } default: do_default: /* If it isn't an induction variable, and it is invariant, we may be able to simplify things further by looking through the bits we just moved outside the loop. */ if (loop_invariant_p (loop, x) == 1) { struct movable *m; struct loop_movables *movables = LOOP_MOVABLES (loop); for (m = movables->head; m; m = m->next) if (rtx_equal_p (x, m->set_dest)) { /* Ok, we found a match. Substitute and simplify. */ /* If we match another movable, we must use that, as this one is going away. */ if (m->match) return simplify_giv_expr (loop, m->match->set_dest, ext_val, benefit); /* If consec is nonzero, this is a member of a group of instructions that were moved together. We handle this case only to the point of seeking to the last insn and looking for a REG_EQUAL. Fail if we don't find one. */ if (m->consec != 0) { int i = m->consec; tem = m->insn; do { tem = NEXT_INSN (tem); } while (--i > 0); tem = find_reg_note (tem, REG_EQUAL, NULL_RTX); if (tem) tem = XEXP (tem, 0); } else { tem = single_set (m->insn); if (tem) tem = SET_SRC (tem); } if (tem) { /* What we are most interested in is pointer arithmetic on invariants -- only take patterns we may be able to do something with. */ if (GET_CODE (tem) == PLUS || GET_CODE (tem) == MULT || GET_CODE (tem) == ASHIFT || GET_CODE (tem) == CONST_INT || GET_CODE (tem) == SYMBOL_REF) { tem = simplify_giv_expr (loop, tem, ext_val, benefit); if (tem) return tem; } else if (GET_CODE (tem) == CONST && GET_CODE (XEXP (tem, 0)) == PLUS && GET_CODE (XEXP (XEXP (tem, 0), 0)) == SYMBOL_REF && GET_CODE (XEXP (XEXP (tem, 0), 1)) == CONST_INT) { tem = simplify_giv_expr (loop, XEXP (tem, 0), ext_val, benefit); if (tem) return tem; } } break; } } break; } /* Fall through to general case. */ default: /* If invariant, return as USE (unless CONST_INT). Otherwise, not giv. */ if (GET_CODE (x) == USE) x = XEXP (x, 0); if (loop_invariant_p (loop, x) == 1) { if (GET_CODE (x) == CONST_INT) return x; if (GET_CODE (x) == CONST && GET_CODE (XEXP (x, 0)) == PLUS && GET_CODE (XEXP (XEXP (x, 0), 0)) == SYMBOL_REF && GET_CODE (XEXP (XEXP (x, 0), 1)) == CONST_INT) x = XEXP (x, 0); return gen_rtx_USE (mode, x); } else return 0; } } /* This routine folds invariants such that there is only ever one CONST_INT in the summation. It is only used by simplify_giv_expr. */ static rtx sge_plus_constant (rtx x, rtx c) { if (GET_CODE (x) == CONST_INT) return GEN_INT (INTVAL (x) + INTVAL (c)); else if (GET_CODE (x) != PLUS) return gen_rtx_PLUS (GET_MODE (x), x, c); else if (GET_CODE (XEXP (x, 1)) == CONST_INT) { return gen_rtx_PLUS (GET_MODE (x), XEXP (x, 0), GEN_INT (INTVAL (XEXP (x, 1)) + INTVAL (c))); } else if (GET_CODE (XEXP (x, 0)) == PLUS || GET_CODE (XEXP (x, 1)) != PLUS) { return gen_rtx_PLUS (GET_MODE (x), sge_plus_constant (XEXP (x, 0), c), XEXP (x, 1)); } else { return gen_rtx_PLUS (GET_MODE (x), sge_plus_constant (XEXP (x, 1), c), XEXP (x, 0)); } } static rtx sge_plus (enum machine_mode mode, rtx x, rtx y) { while (GET_CODE (y) == PLUS) { rtx a = XEXP (y, 0); if (GET_CODE (a) == CONST_INT) x = sge_plus_constant (x, a); else x = gen_rtx_PLUS (mode, x, a); y = XEXP (y, 1); } if (GET_CODE (y) == CONST_INT) x = sge_plus_constant (x, y); else x = gen_rtx_PLUS (mode, x, y); return x; } /* Help detect a giv that is calculated by several consecutive insns; for example, giv = biv * M giv = giv + A The caller has already identified the first insn P as having a giv as dest; we check that all other insns that set the same register follow immediately after P, that they alter nothing else, and that the result of the last is still a giv. The value is 0 if the reg set in P is not really a giv. Otherwise, the value is the amount gained by eliminating all the consecutive insns that compute the value. FIRST_BENEFIT is the amount gained by eliminating the first insn, P. SRC_REG is the reg of the biv; DEST_REG is the reg of the giv. The coefficients of the ultimate giv value are stored in *MULT_VAL and *ADD_VAL. */ static int consec_sets_giv (const struct loop *loop, int first_benefit, rtx p, rtx src_reg, rtx dest_reg, rtx *add_val, rtx *mult_val, rtx *ext_val, rtx *last_consec_insn) { struct loop_ivs *ivs = LOOP_IVS (loop); struct loop_regs *regs = LOOP_REGS (loop); int count; enum rtx_code code; int benefit; rtx temp; rtx set; /* Indicate that this is a giv so that we can update the value produced in each insn of the multi-insn sequence. This induction structure will be used only by the call to general_induction_var below, so we can allocate it on our stack. If this is a giv, our caller will replace the induct var entry with a new induction structure. */ struct induction *v; if (REG_IV_TYPE (ivs, REGNO (dest_reg)) != UNKNOWN_INDUCT) return 0; v = alloca (sizeof (struct induction)); v->src_reg = src_reg; v->mult_val = *mult_val; v->add_val = *add_val; v->benefit = first_benefit; v->cant_derive = 0; v->derive_adjustment = 0; v->ext_dependent = NULL_RTX; REG_IV_TYPE (ivs, REGNO (dest_reg)) = GENERAL_INDUCT; REG_IV_INFO (ivs, REGNO (dest_reg)) = v; count = regs->array[REGNO (dest_reg)].n_times_set - 1; while (count > 0) { p = NEXT_INSN (p); code = GET_CODE (p); /* If libcall, skip to end of call sequence. */ if (code == INSN && (temp = find_reg_note (p, REG_LIBCALL, NULL_RTX))) p = XEXP (temp, 0); if (code == INSN && (set = single_set (p)) && REG_P (SET_DEST (set)) && SET_DEST (set) == dest_reg && (general_induction_var (loop, SET_SRC (set), &src_reg, add_val, mult_val, ext_val, 0, &benefit, VOIDmode) /* Giv created by equivalent expression. */ || ((temp = find_reg_note (p, REG_EQUAL, NULL_RTX)) && general_induction_var (loop, XEXP (temp, 0), &src_reg, add_val, mult_val, ext_val, 0, &benefit, VOIDmode))) && src_reg == v->src_reg) { if (find_reg_note (p, REG_RETVAL, NULL_RTX)) benefit += libcall_benefit (p); count--; v->mult_val = *mult_val; v->add_val = *add_val; v->benefit += benefit; } else if (code != NOTE) { /* Allow insns that set something other than this giv to a constant. Such insns are needed on machines which cannot include long constants and should not disqualify a giv. */ if (code == INSN && (set = single_set (p)) && SET_DEST (set) != dest_reg && CONSTANT_P (SET_SRC (set))) continue; REG_IV_TYPE (ivs, REGNO (dest_reg)) = UNKNOWN_INDUCT; return 0; } } REG_IV_TYPE (ivs, REGNO (dest_reg)) = UNKNOWN_INDUCT; *last_consec_insn = p; return v->benefit; } /* Return an rtx, if any, that expresses giv G2 as a function of the register represented by G1. If no such expression can be found, or it is clear that it cannot possibly be a valid address, 0 is returned. To perform the computation, we note that G1 = x * v + a and G2 = y * v + b where `v' is the biv. So G2 = (y/b) * G1 + (b - a*y/x). Note that MULT = y/x. Update: A and B are now allowed to be additive expressions such that B contains all variables in A. That is, computing B-A will not require subtracting variables. */ static rtx express_from_1 (rtx a, rtx b, rtx mult) { /* If MULT is zero, then A*MULT is zero, and our expression is B. */ if (mult == const0_rtx) return b; /* If MULT is not 1, we cannot handle A with non-constants, since we would then be required to subtract multiples of the registers in A. This is theoretically possible, and may even apply to some Fortran constructs, but it is a lot of work and we do not attempt it here. */ if (mult != const1_rtx && GET_CODE (a) != CONST_INT) return NULL_RTX; /* In general these structures are sorted top to bottom (down the PLUS chain), but not left to right across the PLUS. If B is a higher order giv than A, we can strip one level and recurse. If A is higher order, we'll eventually bail out, but won't know that until the end. If they are the same, we'll strip one level around this loop. */ while (GET_CODE (a) == PLUS && GET_CODE (b) == PLUS) { rtx ra, rb, oa, ob, tmp; ra = XEXP (a, 0), oa = XEXP (a, 1); if (GET_CODE (ra) == PLUS) tmp = ra, ra = oa, oa = tmp; rb = XEXP (b, 0), ob = XEXP (b, 1); if (GET_CODE (rb) == PLUS) tmp = rb, rb = ob, ob = tmp; if (rtx_equal_p (ra, rb)) /* We matched: remove one reg completely. */ a = oa, b = ob; else if (GET_CODE (ob) != PLUS && rtx_equal_p (ra, ob)) /* An alternate match. */ a = oa, b = rb; else if (GET_CODE (oa) != PLUS && rtx_equal_p (oa, rb)) /* An alternate match. */ a = ra, b = ob; else { /* Indicates an extra register in B. Strip one level from B and recurse, hoping B was the higher order expression. */ ob = express_from_1 (a, ob, mult); if (ob == NULL_RTX) return NULL_RTX; return gen_rtx_PLUS (GET_MODE (b), rb, ob); } } /* Here we are at the last level of A, go through the cases hoping to get rid of everything but a constant. */ if (GET_CODE (a) == PLUS) { rtx ra, oa; ra = XEXP (a, 0), oa = XEXP (a, 1); if (rtx_equal_p (oa, b)) oa = ra; else if (!rtx_equal_p (ra, b)) return NULL_RTX; if (GET_CODE (oa) != CONST_INT) return NULL_RTX; return GEN_INT (-INTVAL (oa) * INTVAL (mult)); } else if (GET_CODE (a) == CONST_INT) { return plus_constant (b, -INTVAL (a) * INTVAL (mult)); } else if (CONSTANT_P (a)) { enum machine_mode mode_a = GET_MODE (a); enum machine_mode mode_b = GET_MODE (b); enum machine_mode mode = mode_b == VOIDmode ? mode_a : mode_b; return simplify_gen_binary (MINUS, mode, b, a); } else if (GET_CODE (b) == PLUS) { if (rtx_equal_p (a, XEXP (b, 0))) return XEXP (b, 1); else if (rtx_equal_p (a, XEXP (b, 1))) return XEXP (b, 0); else return NULL_RTX; } else if (rtx_equal_p (a, b)) return const0_rtx; return NULL_RTX; } static rtx express_from (struct induction *g1, struct induction *g2) { rtx mult, add; /* The value that G1 will be multiplied by must be a constant integer. Also, the only chance we have of getting a valid address is if b*c/a (see above for notation) is also an integer. */ if (GET_CODE (g1->mult_val) == CONST_INT && GET_CODE (g2->mult_val) == CONST_INT) { if (g1->mult_val == const0_rtx || (g1->mult_val == constm1_rtx && INTVAL (g2->mult_val) == (HOST_WIDE_INT) 1 << (HOST_BITS_PER_WIDE_INT - 1)) || INTVAL (g2->mult_val) % INTVAL (g1->mult_val) != 0) return NULL_RTX; mult = GEN_INT (INTVAL (g2->mult_val) / INTVAL (g1->mult_val)); } else if (rtx_equal_p (g1->mult_val, g2->mult_val)) mult = const1_rtx; else { /* ??? Find out if the one is a multiple of the other? */ return NULL_RTX; } add = express_from_1 (g1->add_val, g2->add_val, mult); if (add == NULL_RTX) { /* Failed. If we've got a multiplication factor between G1 and G2, scale G1's addend and try again. */ if (INTVAL (mult) > 1) { rtx g1_add_val = g1->add_val; if (GET_CODE (g1_add_val) == MULT && GET_CODE (XEXP (g1_add_val, 1)) == CONST_INT) { HOST_WIDE_INT m; m = INTVAL (mult) * INTVAL (XEXP (g1_add_val, 1)); g1_add_val = gen_rtx_MULT (GET_MODE (g1_add_val), XEXP (g1_add_val, 0), GEN_INT (m)); } else { g1_add_val = gen_rtx_MULT (GET_MODE (g1_add_val), g1_add_val, mult); } add = express_from_1 (g1_add_val, g2->add_val, const1_rtx); } } if (add == NULL_RTX) return NULL_RTX; /* Form simplified final result. */ if (mult == const0_rtx) return add; else if (mult == const1_rtx) mult = g1->dest_reg; else mult = gen_rtx_MULT (g2->mode, g1->dest_reg, mult); if (add == const0_rtx) return mult; else { if (GET_CODE (add) == PLUS && CONSTANT_P (XEXP (add, 1))) { rtx tem = XEXP (add, 1); mult = gen_rtx_PLUS (g2->mode, mult, XEXP (add, 0)); add = tem; } return gen_rtx_PLUS (g2->mode, mult, add); } } /* Return an rtx, if any, that expresses giv G2 as a function of the register represented by G1. This indicates that G2 should be combined with G1 and that G2 can use (either directly or via an address expression) a register used to represent G1. */ static rtx combine_givs_p (struct induction *g1, struct induction *g2) { rtx comb, ret; /* With the introduction of ext dependent givs, we must care for modes. G2 must not use a wider mode than G1. */ if (GET_MODE_SIZE (g1->mode) < GET_MODE_SIZE (g2->mode)) return NULL_RTX; ret = comb = express_from (g1, g2); if (comb == NULL_RTX) return NULL_RTX; if (g1->mode != g2->mode) ret = gen_lowpart (g2->mode, comb); /* If these givs are identical, they can be combined. We use the results of express_from because the addends are not in a canonical form, so rtx_equal_p is a weaker test. */ /* But don't combine a DEST_REG giv with a DEST_ADDR giv; we want the combination to be the other way round. */ if (comb == g1->dest_reg && (g1->giv_type == DEST_REG || g2->giv_type == DEST_ADDR)) { return ret; } /* If G2 can be expressed as a function of G1 and that function is valid as an address and no more expensive than using a register for G2, the expression of G2 in terms of G1 can be used. */ if (ret != NULL_RTX && g2->giv_type == DEST_ADDR && memory_address_p (GET_MODE (g2->mem), ret)) return ret; return NULL_RTX; } /* See if BL is monotonic and has a constant per-iteration increment. Return the increment if so, otherwise return 0. */ static HOST_WIDE_INT get_monotonic_increment (struct iv_class *bl) { struct induction *v; rtx incr; /* Get the total increment and check that it is constant. */ incr = biv_total_increment (bl); if (incr == 0 || GET_CODE (incr) != CONST_INT) return 0; for (v = bl->biv; v != 0; v = v->next_iv) { if (GET_CODE (v->add_val) != CONST_INT) return 0; if (INTVAL (v->add_val) < 0 && INTVAL (incr) >= 0) return 0; if (INTVAL (v->add_val) > 0 && INTVAL (incr) <= 0) return 0; } return INTVAL (incr); } /* Subroutine of biv_fits_mode_p. Return true if biv BL, when biased by BIAS, will never exceed the unsigned range of MODE. LOOP is the loop to which the biv belongs and INCR is its per-iteration increment. */ static bool biased_biv_fits_mode_p (const struct loop *loop, struct iv_class *bl, HOST_WIDE_INT incr, enum machine_mode mode, unsigned HOST_WIDE_INT bias) { unsigned HOST_WIDE_INT initial, maximum, span, delta; /* We need to be able to manipulate MODE-size constants. */ if (HOST_BITS_PER_WIDE_INT < GET_MODE_BITSIZE (mode)) return false; /* The number of loop iterations must be constant. */ if (LOOP_INFO (loop)->n_iterations == 0) return false; /* So must the biv's initial value. */ if (bl->initial_value == 0 || GET_CODE (bl->initial_value) != CONST_INT) return false; initial = bias + INTVAL (bl->initial_value); maximum = GET_MODE_MASK (mode); /* Make sure that the initial value is within range. */ if (initial > maximum) return false; /* Set up DELTA and SPAN such that the number of iterations * DELTA (calculated to arbitrary precision) must be <= SPAN. */ if (incr < 0) { delta = -incr; span = initial; } else { delta = incr; /* Handle the special case in which MAXIMUM is the largest unsigned HOST_WIDE_INT and INITIAL is 0. */ if (maximum + 1 == initial) span = LOOP_INFO (loop)->n_iterations * delta; else span = maximum + 1 - initial; } return (span / LOOP_INFO (loop)->n_iterations >= delta); } /* Return true if biv BL will never exceed the bounds of MODE. LOOP is the loop to which BL belongs and INCR is its per-iteration increment. UNSIGNEDP is true if the biv should be treated as unsigned. */ static bool biv_fits_mode_p (const struct loop *loop, struct iv_class *bl, HOST_WIDE_INT incr, enum machine_mode mode, bool unsignedp) { struct loop_info *loop_info; unsigned HOST_WIDE_INT bias; /* A biv's value will always be limited to its natural mode. Larger modes will observe the same wrap-around. */ if (GET_MODE_SIZE (mode) > GET_MODE_SIZE (GET_MODE (bl->biv->src_reg))) mode = GET_MODE (bl->biv->src_reg); loop_info = LOOP_INFO (loop); bias = (unsignedp ? 0 : (GET_MODE_MASK (mode) >> 1) + 1); if (biased_biv_fits_mode_p (loop, bl, incr, mode, bias)) return true; if (mode == GET_MODE (bl->biv->src_reg) && bl->biv->src_reg == loop_info->iteration_var && loop_info->comparison_value && loop_invariant_p (loop, loop_info->comparison_value)) { /* If the increment is +1, and the exit test is a <, the BIV cannot overflow. (For <=, we have the problematic case that the comparison value might be the maximum value of the range.) */ if (incr == 1) { if (loop_info->comparison_code == LT) return true; if (loop_info->comparison_code == LTU && unsignedp) return true; } /* Likewise for increment -1 and exit test >. */ if (incr == -1) { if (loop_info->comparison_code == GT) return true; if (loop_info->comparison_code == GTU && unsignedp) return true; } } return false; } /* Given that X is an extension or truncation of BL, return true if it is unaffected by overflow. LOOP is the loop to which BL belongs and INCR is its per-iteration increment. */ static bool extension_within_bounds_p (const struct loop *loop, struct iv_class *bl, HOST_WIDE_INT incr, rtx x) { enum machine_mode mode; bool signedp, unsignedp; switch (GET_CODE (x)) { case SIGN_EXTEND: case ZERO_EXTEND: mode = GET_MODE (XEXP (x, 0)); signedp = (GET_CODE (x) == SIGN_EXTEND); unsignedp = (GET_CODE (x) == ZERO_EXTEND); break; case TRUNCATE: /* We don't know whether this value is being used as signed or unsigned, so check the conditions for both. */ mode = GET_MODE (x); signedp = unsignedp = true; break; default: gcc_unreachable (); } return ((!signedp || biv_fits_mode_p (loop, bl, incr, mode, false)) && (!unsignedp || biv_fits_mode_p (loop, bl, incr, mode, true))); } /* Check each extension dependent giv in this class to see if its root biv is safe from wrapping in the interior mode, which would make the giv illegal. */ static void check_ext_dependent_givs (const struct loop *loop, struct iv_class *bl) { struct induction *v; HOST_WIDE_INT incr; incr = get_monotonic_increment (bl); /* Invalidate givs that fail the tests. */ for (v = bl->giv; v; v = v->next_iv) if (v->ext_dependent) { if (incr != 0 && extension_within_bounds_p (loop, bl, incr, v->ext_dependent)) { if (loop_dump_stream) fprintf (loop_dump_stream, "Verified ext dependent giv at %d of reg %d\n", INSN_UID (v->insn), bl->regno); } else { if (loop_dump_stream) fprintf (loop_dump_stream, "Failed ext dependent giv at %d\n", INSN_UID (v->insn)); v->ignore = 1; bl->all_reduced = 0; } } } /* Generate a version of VALUE in a mode appropriate for initializing V. */ static rtx extend_value_for_giv (struct induction *v, rtx value) { rtx ext_dep = v->ext_dependent; if (! ext_dep) return value; /* Recall that check_ext_dependent_givs verified that the known bounds of a biv did not overflow or wrap with respect to the extension for the giv. Therefore, constants need no additional adjustment. */ if (CONSTANT_P (value) && GET_MODE (value) == VOIDmode) return value; /* Otherwise, we must adjust the value to compensate for the differing modes of the biv and the giv. */ return gen_rtx_fmt_e (GET_CODE (ext_dep), GET_MODE (ext_dep), value); } struct combine_givs_stats { int giv_number; int total_benefit; }; static int cmp_combine_givs_stats (const void *xp, const void *yp) { const struct combine_givs_stats * const x = (const struct combine_givs_stats *) xp; const struct combine_givs_stats * const y = (const struct combine_givs_stats *) yp; int d; d = y->total_benefit - x->total_benefit; /* Stabilize the sort. */ if (!d) d = x->giv_number - y->giv_number; return d; } /* Check all pairs of givs for iv_class BL and see if any can be combined with any other. If so, point SAME to the giv combined with and set NEW_REG to be an expression (in terms of the other giv's DEST_REG) equivalent to the giv. Also, update BENEFIT and related fields for cost/benefit analysis. */ static void combine_givs (struct loop_regs *regs, struct iv_class *bl) { /* Additional benefit to add for being combined multiple times. */ const int extra_benefit = 3; struct induction *g1, *g2, **giv_array; int i, j, k, giv_count; struct combine_givs_stats *stats; rtx *can_combine; /* Count givs, because bl->giv_count is incorrect here. */ giv_count = 0; for (g1 = bl->giv; g1; g1 = g1->next_iv) if (!g1->ignore) giv_count++; giv_array = alloca (giv_count * sizeof (struct induction *)); i = 0; for (g1 = bl->giv; g1; g1 = g1->next_iv) if (!g1->ignore) giv_array[i++] = g1; stats = xcalloc (giv_count, sizeof (*stats)); can_combine = xcalloc (giv_count, giv_count * sizeof (rtx)); for (i = 0; i < giv_count; i++) { int this_benefit; rtx single_use; g1 = giv_array[i]; stats[i].giv_number = i; /* If a DEST_REG GIV is used only once, do not allow it to combine with anything, for in doing so we will gain nothing that cannot be had by simply letting the GIV with which we would have combined to be reduced on its own. The lossage shows up in particular with DEST_ADDR targets on hosts with reg+reg addressing, though it can be seen elsewhere as well. */ if (g1->giv_type == DEST_REG && (single_use = regs->array[REGNO (g1->dest_reg)].single_usage) && single_use != const0_rtx) continue; this_benefit = g1->benefit; /* Add an additional weight for zero addends. */ if (g1->no_const_addval) this_benefit += 1; for (j = 0; j < giv_count; j++) { rtx this_combine; g2 = giv_array[j]; if (g1 != g2 && (this_combine = combine_givs_p (g1, g2)) != NULL_RTX) { can_combine[i * giv_count + j] = this_combine; this_benefit += g2->benefit + extra_benefit; } } stats[i].total_benefit = this_benefit; } /* Iterate, combining until we can't. */ restart: qsort (stats, giv_count, sizeof (*stats), cmp_combine_givs_stats); if (loop_dump_stream) { fprintf (loop_dump_stream, "Sorted combine statistics:\n"); for (k = 0; k < giv_count; k++) { g1 = giv_array[stats[k].giv_number]; if (!g1->combined_with && !g1->same) fprintf (loop_dump_stream, " {%d, %d}", INSN_UID (giv_array[stats[k].giv_number]->insn), stats[k].total_benefit); } putc ('\n', loop_dump_stream); } for (k = 0; k < giv_count; k++) { int g1_add_benefit = 0; i = stats[k].giv_number; g1 = giv_array[i]; /* If it has already been combined, skip. */ if (g1->combined_with || g1->same) continue; for (j = 0; j < giv_count; j++) { g2 = giv_array[j]; if (g1 != g2 && can_combine[i * giv_count + j] /* If it has already been combined, skip. */ && ! g2->same && ! g2->combined_with) { int l; g2->new_reg = can_combine[i * giv_count + j]; g2->same = g1; /* For destination, we now may replace by mem expression instead of register. This changes the costs considerably, so add the compensation. */ if (g2->giv_type == DEST_ADDR) g2->benefit = (g2->benefit + reg_address_cost - address_cost (g2->new_reg, GET_MODE (g2->mem))); g1->combined_with++; g1->lifetime += g2->lifetime; g1_add_benefit += g2->benefit; /* ??? The new final_[bg]iv_value code does a much better job of finding replaceable giv's, and hence this code may no longer be necessary. */ if (! g2->replaceable && REG_USERVAR_P (g2->dest_reg)) g1_add_benefit -= copy_cost; /* To help optimize the next set of combinations, remove this giv from the benefits of other potential mates. */ for (l = 0; l < giv_count; ++l) { int m = stats[l].giv_number; if (can_combine[m * giv_count + j]) stats[l].total_benefit -= g2->benefit + extra_benefit; } if (loop_dump_stream) fprintf (loop_dump_stream, "giv at %d combined with giv at %d; new benefit %d + %d, lifetime %d\n", INSN_UID (g2->insn), INSN_UID (g1->insn), g1->benefit, g1_add_benefit, g1->lifetime); } } /* To help optimize the next set of combinations, remove this giv from the benefits of other potential mates. */ if (g1->combined_with) { for (j = 0; j < giv_count; ++j) { int m = stats[j].giv_number; if (can_combine[m * giv_count + i]) stats[j].total_benefit -= g1->benefit + extra_benefit; } g1->benefit += g1_add_benefit; /* We've finished with this giv, and everything it touched. Restart the combination so that proper weights for the rest of the givs are properly taken into account. */ /* ??? Ideally we would compact the arrays at this point, so as to not cover old ground. But sanely compacting can_combine is tricky. */ goto restart; } } /* Clean up. */ free (stats); free (can_combine); } /* Generate sequence for REG = B * M + A. B is the initial value of the basic induction variable, M a multiplicative constant, A an additive constant and REG the destination register. */ static rtx gen_add_mult (rtx b, rtx m, rtx a, rtx reg) { rtx seq; rtx result; start_sequence (); /* Use unsigned arithmetic. */ result = expand_mult_add (b, reg, m, a, GET_MODE (reg), 1); if (reg != result) emit_move_insn (reg, result); seq = get_insns (); end_sequence (); return seq; } /* Update registers created in insn sequence SEQ. */ static void loop_regs_update (const struct loop *loop ATTRIBUTE_UNUSED, rtx seq) { rtx insn; /* Update register info for alias analysis. */ insn = seq; while (insn != NULL_RTX) { rtx set = single_set (insn); if (set && REG_P (SET_DEST (set))) record_base_value (REGNO (SET_DEST (set)), SET_SRC (set), 0); insn = NEXT_INSN (insn); } } /* EMIT code before BEFORE_BB/BEFORE_INSN to set REG = B * M + A. B is the initial value of the basic induction variable, M a multiplicative constant, A an additive constant and REG the destination register. */ static void loop_iv_add_mult_emit_before (const struct loop *loop, rtx b, rtx m, rtx a, rtx reg, basic_block before_bb, rtx before_insn) { rtx seq; if (! before_insn) { loop_iv_add_mult_hoist (loop, b, m, a, reg); return; } /* Use copy_rtx to prevent unexpected sharing of these rtx. */ seq = gen_add_mult (copy_rtx (b), copy_rtx (m), copy_rtx (a), reg); /* Increase the lifetime of any invariants moved further in code. */ update_reg_last_use (a, before_insn); update_reg_last_use (b, before_insn); update_reg_last_use (m, before_insn); /* It is possible that the expansion created lots of new registers. Iterate over the sequence we just created and record them all. We must do this before inserting the sequence. */ loop_regs_update (loop, seq); loop_insn_emit_before (loop, before_bb, before_insn, seq); } /* Emit insns in loop pre-header to set REG = B * M + A. B is the initial value of the basic induction variable, M a multiplicative constant, A an additive constant and REG the destination register. */ static void loop_iv_add_mult_sink (const struct loop *loop, rtx b, rtx m, rtx a, rtx reg) { rtx seq; /* Use copy_rtx to prevent unexpected sharing of these rtx. */ seq = gen_add_mult (copy_rtx (b), copy_rtx (m), copy_rtx (a), reg); /* Increase the lifetime of any invariants moved further in code. ???? Is this really necessary? */ update_reg_last_use (a, loop->sink); update_reg_last_use (b, loop->sink); update_reg_last_use (m, loop->sink); /* It is possible that the expansion created lots of new registers. Iterate over the sequence we just created and record them all. We must do this before inserting the sequence. */ loop_regs_update (loop, seq); loop_insn_sink (loop, seq); } /* Emit insns after loop to set REG = B * M + A. B is the initial value of the basic induction variable, M a multiplicative constant, A an additive constant and REG the destination register. */ static void loop_iv_add_mult_hoist (const struct loop *loop, rtx b, rtx m, rtx a, rtx reg) { rtx seq; /* Use copy_rtx to prevent unexpected sharing of these rtx. */ seq = gen_add_mult (copy_rtx (b), copy_rtx (m), copy_rtx (a), reg); /* It is possible that the expansion created lots of new registers. Iterate over the sequence we just created and record them all. We must do this before inserting the sequence. */ loop_regs_update (loop, seq); loop_insn_hoist (loop, seq); } /* Similar to gen_add_mult, but compute cost rather than generating sequence. */ static int iv_add_mult_cost (rtx b, rtx m, rtx a, rtx reg) { int cost = 0; rtx last, result; start_sequence (); result = expand_mult_add (b, reg, m, a, GET_MODE (reg), 1); if (reg != result) emit_move_insn (reg, result); last = get_last_insn (); while (last) { rtx t = single_set (last); if (t) cost += rtx_cost (SET_SRC (t), SET); last = PREV_INSN (last); } end_sequence (); return cost; } /* Test whether A * B can be computed without an actual multiply insn. Value is 1 if so. ??? This function stinks because it generates a ton of wasted RTL ??? and as a result fragments GC memory to no end. There are other ??? places in the compiler which are invoked a lot and do the same ??? thing, generate wasted RTL just to see if something is possible. */ static int product_cheap_p (rtx a, rtx b) { rtx tmp; int win, n_insns; /* If only one is constant, make it B. */ if (GET_CODE (a) == CONST_INT) tmp = a, a = b, b = tmp; /* If first constant, both constant, so don't need multiply. */ if (GET_CODE (a) == CONST_INT) return 1; /* If second not constant, neither is constant, so would need multiply. */ if (GET_CODE (b) != CONST_INT) return 0; /* One operand is constant, so might not need multiply insn. Generate the code for the multiply and see if a call or multiply, or long sequence of insns is generated. */ start_sequence (); expand_mult (GET_MODE (a), a, b, NULL_RTX, 1); tmp = get_insns (); end_sequence (); win = 1; if (tmp == NULL_RTX) ; else if (INSN_P (tmp)) { n_insns = 0; while (tmp != NULL_RTX) { rtx next = NEXT_INSN (tmp); if (++n_insns > 3 || !NONJUMP_INSN_P (tmp) || (GET_CODE (PATTERN (tmp)) == SET && GET_CODE (SET_SRC (PATTERN (tmp))) == MULT) || (GET_CODE (PATTERN (tmp)) == PARALLEL && GET_CODE (XVECEXP (PATTERN (tmp), 0, 0)) == SET && GET_CODE (SET_SRC (XVECEXP (PATTERN (tmp), 0, 0))) == MULT)) { win = 0; break; } tmp = next; } } else if (GET_CODE (tmp) == SET && GET_CODE (SET_SRC (tmp)) == MULT) win = 0; else if (GET_CODE (tmp) == PARALLEL && GET_CODE (XVECEXP (tmp, 0, 0)) == SET && GET_CODE (SET_SRC (XVECEXP (tmp, 0, 0))) == MULT) win = 0; return win; } /* Check to see if loop can be terminated by a "decrement and branch until zero" instruction. If so, add a REG_NONNEG note to the branch insn if so. Also try reversing an increment loop to a decrement loop to see if the optimization can be performed. Value is nonzero if optimization was performed. */ /* This is useful even if the architecture doesn't have such an insn, because it might change a loops which increments from 0 to n to a loop which decrements from n to 0. A loop that decrements to zero is usually faster than one that increments from zero. */ /* ??? This could be rewritten to use some of the loop unrolling procedures, such as approx_final_value, biv_total_increment, loop_iterations, and final_[bg]iv_value. */ static int check_dbra_loop (struct loop *loop, int insn_count) { struct loop_info *loop_info = LOOP_INFO (loop); struct loop_regs *regs = LOOP_REGS (loop); struct loop_ivs *ivs = LOOP_IVS (loop); struct iv_class *bl; rtx reg; enum machine_mode mode; rtx jump_label; rtx final_value; rtx start_value; rtx new_add_val; rtx comparison; rtx before_comparison; rtx p; rtx jump; rtx first_compare; int compare_and_branch; rtx loop_start = loop->start; rtx loop_end = loop->end; /* If last insn is a conditional branch, and the insn before tests a register value, try to optimize it. Otherwise, we can't do anything. */ jump = PREV_INSN (loop_end); comparison = get_condition_for_loop (loop, jump); if (comparison == 0) return 0; if (!onlyjump_p (jump)) return 0; /* Try to compute whether the compare/branch at the loop end is one or two instructions. */ get_condition (jump, &first_compare, false, true); if (first_compare == jump) compare_and_branch = 1; else if (first_compare == prev_nonnote_insn (jump)) compare_and_branch = 2; else return 0; { /* If more than one condition is present to control the loop, then do not proceed, as this function does not know how to rewrite loop tests with more than one condition. Look backwards from the first insn in the last comparison sequence and see if we've got another comparison sequence. */ rtx jump1; if ((jump1 = prev_nonnote_insn (first_compare)) && JUMP_P (jump1)) return 0; } /* Check all of the bivs to see if the compare uses one of them. Skip biv's set more than once because we can't guarantee that it will be zero on the last iteration. Also skip if the biv is used between its update and the test insn. */ for (bl = ivs->list; bl; bl = bl->next) { if (bl->biv_count == 1 && ! bl->biv->maybe_multiple && bl->biv->dest_reg == XEXP (comparison, 0) && ! reg_used_between_p (regno_reg_rtx[bl->regno], bl->biv->insn, first_compare)) break; } /* Try swapping the comparison to identify a suitable biv. */ if (!bl) for (bl = ivs->list; bl; bl = bl->next) if (bl->biv_count == 1 && ! bl->biv->maybe_multiple && bl->biv->dest_reg == XEXP (comparison, 1) && ! reg_used_between_p (regno_reg_rtx[bl->regno], bl->biv->insn, first_compare)) { comparison = gen_rtx_fmt_ee (swap_condition (GET_CODE (comparison)), VOIDmode, XEXP (comparison, 1), XEXP (comparison, 0)); break; } if (! bl) return 0; /* Look for the case where the basic induction variable is always nonnegative, and equals zero on the last iteration. In this case, add a reg_note REG_NONNEG, which allows the m68k DBRA instruction to be used. */ if (((GET_CODE (comparison) == GT && XEXP (comparison, 1) == constm1_rtx) || (GET_CODE (comparison) == NE && XEXP (comparison, 1) == const0_rtx)) && GET_CODE (bl->biv->add_val) == CONST_INT && INTVAL (bl->biv->add_val) < 0) { /* Initial value must be greater than 0, init_val % -dec_value == 0 to ensure that it equals zero on the last iteration */ if (GET_CODE (bl->initial_value) == CONST_INT && INTVAL (bl->initial_value) > 0 && (INTVAL (bl->initial_value) % (-INTVAL (bl->biv->add_val))) == 0) { /* Register always nonnegative, add REG_NOTE to branch. */ if (! find_reg_note (jump, REG_NONNEG, NULL_RTX)) REG_NOTES (jump) = gen_rtx_EXPR_LIST (REG_NONNEG, bl->biv->dest_reg, REG_NOTES (jump)); bl->nonneg = 1; return 1; } /* If the decrement is 1 and the value was tested as >= 0 before the loop, then we can safely optimize. */ for (p = loop_start; p; p = PREV_INSN (p)) { if (LABEL_P (p)) break; if (!JUMP_P (p)) continue; before_comparison = get_condition_for_loop (loop, p); if (before_comparison && XEXP (before_comparison, 0) == bl->biv->dest_reg && (GET_CODE (before_comparison) == LT || GET_CODE (before_comparison) == LTU) && XEXP (before_comparison, 1) == const0_rtx && ! reg_set_between_p (bl->biv->dest_reg, p, loop_start) && INTVAL (bl->biv->add_val) == -1) { if (! find_reg_note (jump, REG_NONNEG, NULL_RTX)) REG_NOTES (jump) = gen_rtx_EXPR_LIST (REG_NONNEG, bl->biv->dest_reg, REG_NOTES (jump)); bl->nonneg = 1; return 1; } } } else if (GET_CODE (bl->biv->add_val) == CONST_INT && INTVAL (bl->biv->add_val) > 0) { /* Try to change inc to dec, so can apply above optimization. */ /* Can do this if: all registers modified are induction variables or invariant, all memory references have non-overlapping addresses (obviously true if only one write) allow 2 insns for the compare/jump at the end of the loop. */ /* Also, we must avoid any instructions which use both the reversed biv and another biv. Such instructions will fail if the loop is reversed. We meet this condition by requiring that either no_use_except_counting is true, or else that there is only one biv. */ int num_nonfixed_reads = 0; /* 1 if the iteration var is used only to count iterations. */ int no_use_except_counting = 0; /* 1 if the loop has no memory store, or it has a single memory store which is reversible. */ int reversible_mem_store = 1; if (bl->giv_count == 0 && !loop->exit_count && !loop_info->has_multiple_exit_targets) { rtx bivreg = regno_reg_rtx[bl->regno]; struct iv_class *blt; /* If there are no givs for this biv, and the only exit is the fall through at the end of the loop, then see if perhaps there are no uses except to count. */ no_use_except_counting = 1; for (p = loop_start; p != loop_end; p = NEXT_INSN (p)) if (INSN_P (p)) { rtx set = single_set (p); if (set && REG_P (SET_DEST (set)) && REGNO (SET_DEST (set)) == bl->regno) /* An insn that sets the biv is okay. */ ; else if (!reg_mentioned_p (bivreg, PATTERN (p))) /* An insn that doesn't mention the biv is okay. */ ; else if (p == prev_nonnote_insn (prev_nonnote_insn (loop_end)) || p == prev_nonnote_insn (loop_end)) { /* If either of these insns uses the biv and sets a pseudo that has more than one usage, then the biv has uses other than counting since it's used to derive a value that is used more than one time. */ note_stores (PATTERN (p), note_set_pseudo_multiple_uses, regs); if (regs->multiple_uses) { no_use_except_counting = 0; break; } } else { no_use_except_counting = 0; break; } } /* A biv has uses besides counting if it is used to set another biv. */ for (blt = ivs->list; blt; blt = blt->next) if (blt->init_set && reg_mentioned_p (bivreg, SET_SRC (blt->init_set))) { no_use_except_counting = 0; break; } } if (no_use_except_counting) /* No need to worry about MEMs. */ ; else if (loop_info->num_mem_sets <= 1) { for (p = loop_start; p != loop_end; p = NEXT_INSN (p)) if (INSN_P (p)) num_nonfixed_reads += count_nonfixed_reads (loop, PATTERN (p)); /* If the loop has a single store, and the destination address is invariant, then we can't reverse the loop, because this address might then have the wrong value at loop exit. This would work if the source was invariant also, however, in that case, the insn should have been moved out of the loop. */ if (loop_info->num_mem_sets == 1) { struct induction *v; /* If we could prove that each of the memory locations written to was different, then we could reverse the store -- but we don't presently have any way of knowing that. */ reversible_mem_store = 0; /* If the store depends on a register that is set after the store, it depends on the initial value, and is thus not reversible. */ for (v = bl->giv; reversible_mem_store && v; v = v->next_iv) { if (v->giv_type == DEST_REG && reg_mentioned_p (v->dest_reg, PATTERN (loop_info->first_loop_store_insn)) && loop_insn_first_p (loop_info->first_loop_store_insn, v->insn)) reversible_mem_store = 0; } } } else return 0; /* This code only acts for innermost loops. Also it simplifies the memory address check by only reversing loops with zero or one memory access. Two memory accesses could involve parts of the same array, and that can't be reversed. If the biv is used only for counting, than we don't need to worry about all these things. */ if ((num_nonfixed_reads <= 1 && ! loop_info->has_nonconst_call && ! loop_info->has_prefetch && ! loop_info->has_volatile && reversible_mem_store && (bl->giv_count + bl->biv_count + loop_info->num_mem_sets + num_unmoved_movables (loop) + compare_and_branch == insn_count) && (bl == ivs->list && bl->next == 0)) || (no_use_except_counting && ! loop_info->has_prefetch)) { rtx tem; /* Loop can be reversed. */ if (loop_dump_stream) fprintf (loop_dump_stream, "Can reverse loop\n"); /* Now check other conditions: The increment must be a constant, as must the initial value, and the comparison code must be LT. This test can probably be improved since +/- 1 in the constant can be obtained by changing LT to LE and vice versa; this is confusing. */ if (comparison /* for constants, LE gets turned into LT */ && (GET_CODE (comparison) == LT || (GET_CODE (comparison) == LE && no_use_except_counting) || GET_CODE (comparison) == LTU)) { HOST_WIDE_INT add_val, add_adjust, comparison_val = 0; rtx initial_value, comparison_value; int nonneg = 0; enum rtx_code cmp_code; int comparison_const_width; unsigned HOST_WIDE_INT comparison_sign_mask; bool keep_first_compare; add_val = INTVAL (bl->biv->add_val); comparison_value = XEXP (comparison, 1); if (GET_MODE (comparison_value) == VOIDmode) comparison_const_width = GET_MODE_BITSIZE (GET_MODE (XEXP (comparison, 0))); else comparison_const_width = GET_MODE_BITSIZE (GET_MODE (comparison_value)); if (comparison_const_width > HOST_BITS_PER_WIDE_INT) comparison_const_width = HOST_BITS_PER_WIDE_INT; comparison_sign_mask = (unsigned HOST_WIDE_INT) 1 << (comparison_const_width - 1); /* If the comparison value is not a loop invariant, then we can not reverse this loop. ??? If the insns which initialize the comparison value as a whole compute an invariant result, then we could move them out of the loop and proceed with loop reversal. */ if (! loop_invariant_p (loop, comparison_value)) return 0; if (GET_CODE (comparison_value) == CONST_INT) comparison_val = INTVAL (comparison_value); initial_value = bl->initial_value; /* Normalize the initial value if it is an integer and has no other use except as a counter. This will allow a few more loops to be reversed. */ if (no_use_except_counting && GET_CODE (comparison_value) == CONST_INT && GET_CODE (initial_value) == CONST_INT) { comparison_val = comparison_val - INTVAL (bl->initial_value); /* The code below requires comparison_val to be a multiple of add_val in order to do the loop reversal, so round up comparison_val to a multiple of add_val. Since comparison_value is constant, we know that the current comparison code is LT. */ comparison_val = comparison_val + add_val - 1; comparison_val -= (unsigned HOST_WIDE_INT) comparison_val % add_val; /* We postpone overflow checks for COMPARISON_VAL here; even if there is an overflow, we might still be able to reverse the loop, if converting the loop exit test to NE is possible. */ initial_value = const0_rtx; } /* First check if we can do a vanilla loop reversal. */ if (initial_value == const0_rtx && GET_CODE (comparison_value) == CONST_INT /* Now do postponed overflow checks on COMPARISON_VAL. */ && ! (((comparison_val - add_val) ^ INTVAL (comparison_value)) & comparison_sign_mask)) { /* Register will always be nonnegative, with value 0 on last iteration */ add_adjust = add_val; nonneg = 1; cmp_code = GE; } else return 0; if (GET_CODE (comparison) == LE) add_adjust -= add_val; /* If the initial value is not zero, or if the comparison value is not an exact multiple of the increment, then we can not reverse this loop. */ if (initial_value == const0_rtx && GET_CODE (comparison_value) == CONST_INT) { if (((unsigned HOST_WIDE_INT) comparison_val % add_val) != 0) return 0; } else { if (! no_use_except_counting || add_val != 1) return 0; } final_value = comparison_value; /* Reset these in case we normalized the initial value and comparison value above. */ if (GET_CODE (comparison_value) == CONST_INT && GET_CODE (initial_value) == CONST_INT) { comparison_value = GEN_INT (comparison_val); final_value = GEN_INT (comparison_val + INTVAL (bl->initial_value)); } bl->initial_value = initial_value; /* Save some info needed to produce the new insns. */ reg = bl->biv->dest_reg; mode = GET_MODE (reg); jump_label = condjump_label (PREV_INSN (loop_end)); new_add_val = GEN_INT (-INTVAL (bl->biv->add_val)); /* Set start_value; if this is not a CONST_INT, we need to generate a SUB. Initialize biv to start_value before loop start. The old initializing insn will be deleted as a dead store by flow.c. */ if (initial_value == const0_rtx && GET_CODE (comparison_value) == CONST_INT) { start_value = gen_int_mode (comparison_val - add_adjust, mode); loop_insn_hoist (loop, gen_move_insn (reg, start_value)); } else if (GET_CODE (initial_value) == CONST_INT) { rtx offset = GEN_INT (-INTVAL (initial_value) - add_adjust); rtx add_insn = gen_add3_insn (reg, comparison_value, offset); if (add_insn == 0) return 0; start_value = gen_rtx_PLUS (mode, comparison_value, offset); loop_insn_hoist (loop, add_insn); if (GET_CODE (comparison) == LE) final_value = gen_rtx_PLUS (mode, comparison_value, GEN_INT (add_val)); } else if (! add_adjust) { rtx sub_insn = gen_sub3_insn (reg, comparison_value, initial_value); if (sub_insn == 0) return 0; start_value = gen_rtx_MINUS (mode, comparison_value, initial_value); loop_insn_hoist (loop, sub_insn); } else /* We could handle the other cases too, but it'll be better to have a testcase first. */ return 0; /* We may not have a single insn which can increment a reg, so create a sequence to hold all the insns from expand_inc. */ start_sequence (); expand_inc (reg, new_add_val); tem = get_insns (); end_sequence (); p = loop_insn_emit_before (loop, 0, bl->biv->insn, tem); delete_insn (bl->biv->insn); /* Update biv info to reflect its new status. */ bl->biv->insn = p; bl->initial_value = start_value; bl->biv->add_val = new_add_val; /* Update loop info. */ loop_info->initial_value = reg; loop_info->initial_equiv_value = reg; loop_info->final_value = const0_rtx; loop_info->final_equiv_value = const0_rtx; loop_info->comparison_value = const0_rtx; loop_info->comparison_code = cmp_code; loop_info->increment = new_add_val; /* Inc LABEL_NUSES so that delete_insn will not delete the label. */ LABEL_NUSES (XEXP (jump_label, 0))++; /* If we have a separate comparison insn that does more than just set cc0, the result of the comparison might be used outside the loop. */ keep_first_compare = (compare_and_branch == 2 #ifdef HAVE_CC0 && sets_cc0_p (first_compare) <= 0 #endif ); /* Emit an insn after the end of the loop to set the biv's proper exit value if it is used anywhere outside the loop. */ if (keep_first_compare || (REGNO_LAST_UID (bl->regno) != INSN_UID (first_compare)) || ! bl->init_insn || REGNO_FIRST_UID (bl->regno) != INSN_UID (bl->init_insn)) loop_insn_sink (loop, gen_load_of_final_value (reg, final_value)); if (keep_first_compare) loop_insn_sink (loop, PATTERN (first_compare)); /* Delete compare/branch at end of loop. */ delete_related_insns (PREV_INSN (loop_end)); if (compare_and_branch == 2) delete_related_insns (first_compare); /* Add new compare/branch insn at end of loop. */ start_sequence (); emit_cmp_and_jump_insns (reg, const0_rtx, cmp_code, NULL_RTX, mode, 0, XEXP (jump_label, 0)); tem = get_insns (); end_sequence (); emit_jump_insn_before (tem, loop_end); for (tem = PREV_INSN (loop_end); tem && !JUMP_P (tem); tem = PREV_INSN (tem)) ; if (tem) JUMP_LABEL (tem) = XEXP (jump_label, 0); if (nonneg) { if (tem) { /* Increment of LABEL_NUSES done above. */ /* Register is now always nonnegative, so add REG_NONNEG note to the branch. */ REG_NOTES (tem) = gen_rtx_EXPR_LIST (REG_NONNEG, reg, REG_NOTES (tem)); } bl->nonneg = 1; } /* No insn may reference both the reversed and another biv or it will fail (see comment near the top of the loop reversal code). Earlier on, we have verified that the biv has no use except counting, or it is the only biv in this function. However, the code that computes no_use_except_counting does not verify reg notes. It's possible to have an insn that references another biv, and has a REG_EQUAL note with an expression based on the reversed biv. To avoid this case, remove all REG_EQUAL notes based on the reversed biv here. */ for (p = loop_start; p != loop_end; p = NEXT_INSN (p)) if (INSN_P (p)) { rtx *pnote; rtx set = single_set (p); /* If this is a set of a GIV based on the reversed biv, any REG_EQUAL notes should still be correct. */ if (! set || !REG_P (SET_DEST (set)) || (size_t) REGNO (SET_DEST (set)) >= ivs->n_regs || REG_IV_TYPE (ivs, REGNO (SET_DEST (set))) != GENERAL_INDUCT || REG_IV_INFO (ivs, REGNO (SET_DEST (set)))->src_reg != bl->biv->src_reg) for (pnote = ®_NOTES (p); *pnote;) { if (REG_NOTE_KIND (*pnote) == REG_EQUAL && reg_mentioned_p (regno_reg_rtx[bl->regno], XEXP (*pnote, 0))) *pnote = XEXP (*pnote, 1); else pnote = &XEXP (*pnote, 1); } } /* Mark that this biv has been reversed. Each giv which depends on this biv, and which is also live past the end of the loop will have to be fixed up. */ bl->reversed = 1; if (loop_dump_stream) { fprintf (loop_dump_stream, "Reversed loop"); if (bl->nonneg) fprintf (loop_dump_stream, " and added reg_nonneg\n"); else fprintf (loop_dump_stream, "\n"); } return 1; } } } return 0; } /* Verify whether the biv BL appears to be eliminable, based on the insns in the loop that refer to it. If ELIMINATE_P is nonzero, actually do the elimination. THRESHOLD and INSN_COUNT are from loop_optimize and are used to determine whether invariant insns should be placed inside or at the start of the loop. */ static int maybe_eliminate_biv (const struct loop *loop, struct iv_class *bl, int eliminate_p, int threshold, int insn_count) { struct loop_ivs *ivs = LOOP_IVS (loop); rtx reg = bl->biv->dest_reg; rtx p; /* Scan all insns in the loop, stopping if we find one that uses the biv in a way that we cannot eliminate. */ for (p = loop->start; p != loop->end; p = NEXT_INSN (p)) { enum rtx_code code = GET_CODE (p); basic_block where_bb = 0; rtx where_insn = threshold >= insn_count ? 0 : p; rtx note; /* If this is a libcall that sets a giv, skip ahead to its end. */ if (INSN_P (p)) { note = find_reg_note (p, REG_LIBCALL, NULL_RTX); if (note) { rtx last = XEXP (note, 0); rtx set = single_set (last); if (set && REG_P (SET_DEST (set))) { unsigned int regno = REGNO (SET_DEST (set)); if (regno < ivs->n_regs && REG_IV_TYPE (ivs, regno) == GENERAL_INDUCT && REG_IV_INFO (ivs, regno)->src_reg == bl->biv->src_reg) p = last; } } } /* Closely examine the insn if the biv is mentioned. */ if ((code == INSN || code == JUMP_INSN || code == CALL_INSN) && reg_mentioned_p (reg, PATTERN (p)) && ! maybe_eliminate_biv_1 (loop, PATTERN (p), p, bl, eliminate_p, where_bb, where_insn)) { if (loop_dump_stream) fprintf (loop_dump_stream, "Cannot eliminate biv %d: biv used in insn %d.\n", bl->regno, INSN_UID (p)); break; } /* If we are eliminating, kill REG_EQUAL notes mentioning the biv. */ if (eliminate_p && (note = find_reg_note (p, REG_EQUAL, NULL_RTX)) != NULL_RTX && reg_mentioned_p (reg, XEXP (note, 0))) remove_note (p, note); } if (p == loop->end) { if (loop_dump_stream) fprintf (loop_dump_stream, "biv %d %s eliminated.\n", bl->regno, eliminate_p ? "was" : "can be"); return 1; } return 0; } /* INSN and REFERENCE are instructions in the same insn chain. Return nonzero if INSN is first. */ static int loop_insn_first_p (rtx insn, rtx reference) { rtx p, q; for (p = insn, q = reference;;) { /* Start with test for not first so that INSN == REFERENCE yields not first. */ if (q == insn || ! p) return 0; if (p == reference || ! q) return 1; /* Either of P or Q might be a NOTE. Notes have the same LUID as the previous insn, hence the <= comparison below does not work if P is a note. */ if (INSN_UID (p) < max_uid_for_loop && INSN_UID (q) < max_uid_for_loop && !NOTE_P (p)) return INSN_LUID (p) <= INSN_LUID (q); if (INSN_UID (p) >= max_uid_for_loop || NOTE_P (p)) p = NEXT_INSN (p); if (INSN_UID (q) >= max_uid_for_loop) q = NEXT_INSN (q); } } /* We are trying to eliminate BIV in INSN using GIV. Return nonzero if the offset that we have to take into account due to auto-increment / div derivation is zero. */ static int biv_elimination_giv_has_0_offset (struct induction *biv, struct induction *giv, rtx insn) { /* If the giv V had the auto-inc address optimization applied to it, and INSN occurs between the giv insn and the biv insn, then we'd have to adjust the value used here. This is rare, so we don't bother to make this possible. */ if (giv->auto_inc_opt && ((loop_insn_first_p (giv->insn, insn) && loop_insn_first_p (insn, biv->insn)) || (loop_insn_first_p (biv->insn, insn) && loop_insn_first_p (insn, giv->insn)))) return 0; return 1; } /* If BL appears in X (part of the pattern of INSN), see if we can eliminate its use. If so, return 1. If not, return 0. If BIV does not appear in X, return 1. If ELIMINATE_P is nonzero, actually do the elimination. WHERE_INSN/WHERE_BB indicate where extra insns should be added. Depending on how many items have been moved out of the loop, it will either be before INSN (when WHERE_INSN is nonzero) or at the start of the loop (when WHERE_INSN is zero). */ static int maybe_eliminate_biv_1 (const struct loop *loop, rtx x, rtx insn, struct iv_class *bl, int eliminate_p, basic_block where_bb, rtx where_insn) { enum rtx_code code = GET_CODE (x); rtx reg = bl->biv->dest_reg; enum machine_mode mode = GET_MODE (reg); struct induction *v; rtx arg, tem; #ifdef HAVE_cc0 rtx new; #endif int arg_operand; const char *fmt; int i, j; switch (code) { case REG: /* If we haven't already been able to do something with this BIV, we can't eliminate it. */ if (x == reg) return 0; return 1; case SET: /* If this sets the BIV, it is not a problem. */ if (SET_DEST (x) == reg) return 1; /* If this is an insn that defines a giv, it is also ok because it will go away when the giv is reduced. */ for (v = bl->giv; v; v = v->next_iv) if (v->giv_type == DEST_REG && SET_DEST (x) == v->dest_reg) return 1; #ifdef HAVE_cc0 if (SET_DEST (x) == cc0_rtx && SET_SRC (x) == reg) { /* Can replace with any giv that was reduced and that has (MULT_VAL != 0) and (ADD_VAL == 0). Require a constant for MULT_VAL, so we know it's nonzero. ??? We disable this optimization to avoid potential overflows. */ for (v = bl->giv; v; v = v->next_iv) if (GET_CODE (v->mult_val) == CONST_INT && v->mult_val != const0_rtx && v->add_val == const0_rtx && ! v->ignore && ! v->maybe_dead && v->always_computable && v->mode == mode && 0) { if (! biv_elimination_giv_has_0_offset (bl->biv, v, insn)) continue; if (! eliminate_p) return 1; /* If the giv has the opposite direction of change, then reverse the comparison. */ if (INTVAL (v->mult_val) < 0) new = gen_rtx_COMPARE (GET_MODE (v->new_reg), const0_rtx, v->new_reg); else new = v->new_reg; /* We can probably test that giv's reduced reg. */ if (validate_change (insn, &SET_SRC (x), new, 0)) return 1; } /* Look for a giv with (MULT_VAL != 0) and (ADD_VAL != 0); replace test insn with a compare insn (cmp REDUCED_GIV ADD_VAL). Require a constant for MULT_VAL, so we know it's nonzero. ??? Do this only if ADD_VAL is a pointer to avoid a potential overflow problem. */ for (v = bl->giv; v; v = v->next_iv) if (GET_CODE (v->mult_val) == CONST_INT && v->mult_val != const0_rtx && ! v->ignore && ! v->maybe_dead && v->always_computable && v->mode == mode && (GET_CODE (v->add_val) == SYMBOL_REF || GET_CODE (v->add_val) == LABEL_REF || GET_CODE (v->add_val) == CONST || (REG_P (v->add_val) && REG_POINTER (v->add_val)))) { if (! biv_elimination_giv_has_0_offset (bl->biv, v, insn)) continue; if (! eliminate_p) return 1; /* If the giv has the opposite direction of change, then reverse the comparison. */ if (INTVAL (v->mult_val) < 0) new = gen_rtx_COMPARE (VOIDmode, copy_rtx (v->add_val), v->new_reg); else new = gen_rtx_COMPARE (VOIDmode, v->new_reg, copy_rtx (v->add_val)); /* Replace biv with the giv's reduced register. */ update_reg_last_use (v->add_val, insn); if (validate_change (insn, &SET_SRC (PATTERN (insn)), new, 0)) return 1; /* Insn doesn't support that constant or invariant. Copy it into a register (it will be a loop invariant.) */ tem = gen_reg_rtx (GET_MODE (v->new_reg)); loop_insn_emit_before (loop, 0, where_insn, gen_move_insn (tem, copy_rtx (v->add_val))); /* Substitute the new register for its invariant value in the compare expression. */ XEXP (new, (INTVAL (v->mult_val) < 0) ? 0 : 1) = tem; if (validate_change (insn, &SET_SRC (PATTERN (insn)), new, 0)) return 1; } } #endif break; case COMPARE: case EQ: case NE: case GT: case GE: case GTU: case GEU: case LT: case LE: case LTU: case LEU: /* See if either argument is the biv. */ if (XEXP (x, 0) == reg) arg = XEXP (x, 1), arg_operand = 1; else if (XEXP (x, 1) == reg) arg = XEXP (x, 0), arg_operand = 0; else break; if (CONSTANT_P (arg)) { /* First try to replace with any giv that has constant positive mult_val and constant add_val. We might be able to support negative mult_val, but it seems complex to do it in general. */ for (v = bl->giv; v; v = v->next_iv) if (GET_CODE (v->mult_val) == CONST_INT && INTVAL (v->mult_val) > 0 && (GET_CODE (v->add_val) == SYMBOL_REF || GET_CODE (v->add_val) == LABEL_REF || GET_CODE (v->add_val) == CONST || (REG_P (v->add_val) && REG_POINTER (v->add_val))) && ! v->ignore && ! v->maybe_dead && v->always_computable && v->mode == mode) { if (! biv_elimination_giv_has_0_offset (bl->biv, v, insn)) continue; /* Don't eliminate if the linear combination that makes up the giv overflows when it is applied to ARG. */ if (GET_CODE (arg) == CONST_INT) { rtx add_val; if (GET_CODE (v->add_val) == CONST_INT) add_val = v->add_val; else add_val = const0_rtx; if (const_mult_add_overflow_p (arg, v->mult_val, add_val, mode, 1)) continue; } if (! eliminate_p) return 1; /* Replace biv with the giv's reduced reg. */ validate_change (insn, &XEXP (x, 1 - arg_operand), v->new_reg, 1); /* If all constants are actually constant integers and the derived constant can be directly placed in the COMPARE, do so. */ if (GET_CODE (arg) == CONST_INT && GET_CODE (v->add_val) == CONST_INT) { tem = expand_mult_add (arg, NULL_RTX, v->mult_val, v->add_val, mode, 1); } else { /* Otherwise, load it into a register. */ tem = gen_reg_rtx (mode); loop_iv_add_mult_emit_before (loop, arg, v->mult_val, v->add_val, tem, where_bb, where_insn); } validate_change (insn, &XEXP (x, arg_operand), tem, 1); if (apply_change_group ()) return 1; } /* Look for giv with positive constant mult_val and nonconst add_val. Insert insns to calculate new compare value. ??? Turn this off due to possible overflow. */ for (v = bl->giv; v; v = v->next_iv) if (GET_CODE (v->mult_val) == CONST_INT && INTVAL (v->mult_val) > 0 && ! v->ignore && ! v->maybe_dead && v->always_computable && v->mode == mode && 0) { rtx tem; if (! biv_elimination_giv_has_0_offset (bl->biv, v, insn)) continue; if (! eliminate_p) return 1; tem = gen_reg_rtx (mode); /* Replace biv with giv's reduced register. */ validate_change (insn, &XEXP (x, 1 - arg_operand), v->new_reg, 1); /* Compute value to compare against. */ loop_iv_add_mult_emit_before (loop, arg, v->mult_val, v->add_val, tem, where_bb, where_insn); /* Use it in this insn. */ validate_change (insn, &XEXP (x, arg_operand), tem, 1); if (apply_change_group ()) return 1; } } else if (REG_P (arg) || MEM_P (arg)) { if (loop_invariant_p (loop, arg) == 1) { /* Look for giv with constant positive mult_val and nonconst add_val. Insert insns to compute new compare value. ??? Turn this off due to possible overflow. */ for (v = bl->giv; v; v = v->next_iv) if (GET_CODE (v->mult_val) == CONST_INT && INTVAL (v->mult_val) > 0 && ! v->ignore && ! v->maybe_dead && v->always_computable && v->mode == mode && 0) { rtx tem; if (! biv_elimination_giv_has_0_offset (bl->biv, v, insn)) continue; if (! eliminate_p) return 1; tem = gen_reg_rtx (mode); /* Replace biv with giv's reduced register. */ validate_change (insn, &XEXP (x, 1 - arg_operand), v->new_reg, 1); /* Compute value to compare against. */ loop_iv_add_mult_emit_before (loop, arg, v->mult_val, v->add_val, tem, where_bb, where_insn); validate_change (insn, &XEXP (x, arg_operand), tem, 1); if (apply_change_group ()) return 1; } } /* This code has problems. Basically, you can't know when seeing if we will eliminate BL, whether a particular giv of ARG will be reduced. If it isn't going to be reduced, we can't eliminate BL. We can try forcing it to be reduced, but that can generate poor code. The problem is that the benefit of reducing TV, below should be increased if BL can actually be eliminated, but this means we might have to do a topological sort of the order in which we try to process biv. It doesn't seem worthwhile to do this sort of thing now. */ #if 0 /* Otherwise the reg compared with had better be a biv. */ if (!REG_P (arg) || REG_IV_TYPE (ivs, REGNO (arg)) != BASIC_INDUCT) return 0; /* Look for a pair of givs, one for each biv, with identical coefficients. */ for (v = bl->giv; v; v = v->next_iv) { struct induction *tv; if (v->ignore || v->maybe_dead || v->mode != mode) continue; for (tv = REG_IV_CLASS (ivs, REGNO (arg))->giv; tv; tv = tv->next_iv) if (! tv->ignore && ! tv->maybe_dead && rtx_equal_p (tv->mult_val, v->mult_val) && rtx_equal_p (tv->add_val, v->add_val) && tv->mode == mode) { if (! biv_elimination_giv_has_0_offset (bl->biv, v, insn)) continue; if (! eliminate_p) return 1; /* Replace biv with its giv's reduced reg. */ XEXP (x, 1 - arg_operand) = v->new_reg; /* Replace other operand with the other giv's reduced reg. */ XEXP (x, arg_operand) = tv->new_reg; return 1; } } #endif } /* If we get here, the biv can't be eliminated. */ return 0; case MEM: /* If this address is a DEST_ADDR giv, it doesn't matter if the biv is used in it, since it will be replaced. */ for (v = bl->giv; v; v = v->next_iv) if (v->giv_type == DEST_ADDR && v->location == &XEXP (x, 0)) return 1; break; default: break; } /* See if any subexpression fails elimination. */ fmt = GET_RTX_FORMAT (code); for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) { switch (fmt[i]) { case 'e': if (! maybe_eliminate_biv_1 (loop, XEXP (x, i), insn, bl, eliminate_p, where_bb, where_insn)) return 0; break; case 'E': for (j = XVECLEN (x, i) - 1; j >= 0; j--) if (! maybe_eliminate_biv_1 (loop, XVECEXP (x, i, j), insn, bl, eliminate_p, where_bb, where_insn)) return 0; break; } } return 1; } /* Return nonzero if the last use of REG is in an insn following INSN in the same basic block. */ static int last_use_this_basic_block (rtx reg, rtx insn) { rtx n; for (n = insn; n && !LABEL_P (n) && !JUMP_P (n); n = NEXT_INSN (n)) { if (REGNO_LAST_UID (REGNO (reg)) == INSN_UID (n)) return 1; } return 0; } /* Called via `note_stores' to record the initial value of a biv. Here we just record the location of the set and process it later. */ static void record_initial (rtx dest, rtx set, void *data ATTRIBUTE_UNUSED) { struct loop_ivs *ivs = (struct loop_ivs *) data; struct iv_class *bl; if (!REG_P (dest) || REGNO (dest) >= ivs->n_regs || REG_IV_TYPE (ivs, REGNO (dest)) != BASIC_INDUCT) return; bl = REG_IV_CLASS (ivs, REGNO (dest)); /* If this is the first set found, record it. */ if (bl->init_insn == 0) { bl->init_insn = note_insn; bl->init_set = set; } } /* If any of the registers in X are "old" and currently have a last use earlier than INSN, update them to have a last use of INSN. Their actual last use will be the previous insn but it will not have a valid uid_luid so we can't use it. X must be a source expression only. */ static void update_reg_last_use (rtx x, rtx insn) { /* Check for the case where INSN does not have a valid luid. In this case, there is no need to modify the regno_last_uid, as this can only happen when code is inserted after the loop_end to set a pseudo's final value, and hence this insn will never be the last use of x. ???? This comment is not correct. See for example loop_givs_reduce. This may insert an insn before another new insn. */ if (REG_P (x) && REGNO (x) < max_reg_before_loop && INSN_UID (insn) < max_uid_for_loop && REGNO_LAST_LUID (REGNO (x)) < INSN_LUID (insn)) { REGNO_LAST_UID (REGNO (x)) = INSN_UID (insn); } else { int i, j; const char *fmt = GET_RTX_FORMAT (GET_CODE (x)); for (i = GET_RTX_LENGTH (GET_CODE (x)) - 1; i >= 0; i--) { if (fmt[i] == 'e') update_reg_last_use (XEXP (x, i), insn); else if (fmt[i] == 'E') for (j = XVECLEN (x, i) - 1; j >= 0; j--) update_reg_last_use (XVECEXP (x, i, j), insn); } } } /* Similar to rtlanal.c:get_condition, except that we also put an invariant last unless both operands are invariants. */ static rtx get_condition_for_loop (const struct loop *loop, rtx x) { rtx comparison = get_condition (x, (rtx*) 0, false, true); if (comparison == 0 || ! loop_invariant_p (loop, XEXP (comparison, 0)) || loop_invariant_p (loop, XEXP (comparison, 1))) return comparison; return gen_rtx_fmt_ee (swap_condition (GET_CODE (comparison)), VOIDmode, XEXP (comparison, 1), XEXP (comparison, 0)); } /* Scan the function and determine whether it has indirect (computed) jumps. This is taken mostly from flow.c; similar code exists elsewhere in the compiler. It may be useful to put this into rtlanal.c. */ static int indirect_jump_in_function_p (rtx start) { rtx insn; for (insn = start; insn; insn = NEXT_INSN (insn)) if (computed_jump_p (insn)) return 1; return 0; } /* Add MEM to the LOOP_MEMS array, if appropriate. See the documentation for LOOP_MEMS for the definition of `appropriate'. This function is called from prescan_loop via for_each_rtx. */ static int insert_loop_mem (rtx *mem, void *data ATTRIBUTE_UNUSED) { struct loop_info *loop_info = data; int i; rtx m = *mem; if (m == NULL_RTX) return 0; switch (GET_CODE (m)) { case MEM: break; case CLOBBER: /* We're not interested in MEMs that are only clobbered. */ return -1; case CONST_DOUBLE: /* We're not interested in the MEM associated with a CONST_DOUBLE, so there's no need to traverse into this. */ return -1; case EXPR_LIST: /* We're not interested in any MEMs that only appear in notes. */ return -1; default: /* This is not a MEM. */ return 0; } /* See if we've already seen this MEM. */ for (i = 0; i < loop_info->mems_idx; ++i) if (rtx_equal_p (m, loop_info->mems[i].mem)) { if (MEM_VOLATILE_P (m) && !MEM_VOLATILE_P (loop_info->mems[i].mem)) loop_info->mems[i].mem = m; if (GET_MODE (m) != GET_MODE (loop_info->mems[i].mem)) /* The modes of the two memory accesses are different. If this happens, something tricky is going on, and we just don't optimize accesses to this MEM. */ loop_info->mems[i].optimize = 0; return 0; } /* Resize the array, if necessary. */ if (loop_info->mems_idx == loop_info->mems_allocated) { if (loop_info->mems_allocated != 0) loop_info->mems_allocated *= 2; else loop_info->mems_allocated = 32; loop_info->mems = xrealloc (loop_info->mems, loop_info->mems_allocated * sizeof (loop_mem_info)); } /* Actually insert the MEM. */ loop_info->mems[loop_info->mems_idx].mem = m; /* We can't hoist this MEM out of the loop if it's a BLKmode MEM because we can't put it in a register. We still store it in the table, though, so that if we see the same address later, but in a non-BLK mode, we'll not think we can optimize it at that point. */ loop_info->mems[loop_info->mems_idx].optimize = (GET_MODE (m) != BLKmode); loop_info->mems[loop_info->mems_idx].reg = NULL_RTX; ++loop_info->mems_idx; return 0; } /* Allocate REGS->ARRAY or reallocate it if it is too small. Increment REGS->ARRAY[I].SET_IN_LOOP at the index I of each register that is modified by an insn between FROM and TO. If the value of an element of REGS->array[I].SET_IN_LOOP becomes 127 or more, stop incrementing it, to avoid overflow. Store in REGS->ARRAY[I].SINGLE_USAGE the single insn in which register I is used, if it is only used once. Otherwise, it is set to 0 (for no uses) or const0_rtx for more than one use. This parameter may be zero, in which case this processing is not done. Set REGS->ARRAY[I].MAY_NOT_OPTIMIZE nonzero if we should not optimize register I. */ static void loop_regs_scan (const struct loop *loop, int extra_size) { struct loop_regs *regs = LOOP_REGS (loop); int old_nregs; /* last_set[n] is nonzero iff reg n has been set in the current basic block. In that case, it is the insn that last set reg n. */ rtx *last_set; rtx insn; int i; old_nregs = regs->num; regs->num = max_reg_num (); /* Grow the regs array if not allocated or too small. */ if (regs->num >= regs->size) { regs->size = regs->num + extra_size; regs->array = xrealloc (regs->array, regs->size * sizeof (*regs->array)); /* Zero the new elements. */ memset (regs->array + old_nregs, 0, (regs->size - old_nregs) * sizeof (*regs->array)); } /* Clear previously scanned fields but do not clear n_times_set. */ for (i = 0; i < old_nregs; i++) { regs->array[i].set_in_loop = 0; regs->array[i].may_not_optimize = 0; regs->array[i].single_usage = NULL_RTX; } last_set = xcalloc (regs->num, sizeof (rtx)); /* Scan the loop, recording register usage. */ for (insn = loop->top ? loop->top : loop->start; insn != loop->end; insn = NEXT_INSN (insn)) { if (INSN_P (insn)) { /* Record registers that have exactly one use. */ find_single_use_in_loop (regs, insn, PATTERN (insn)); /* Include uses in REG_EQUAL notes. */ if (REG_NOTES (insn)) find_single_use_in_loop (regs, insn, REG_NOTES (insn)); if (GET_CODE (PATTERN (insn)) == SET || GET_CODE (PATTERN (insn)) == CLOBBER) count_one_set (regs, insn, PATTERN (insn), last_set); else if (GET_CODE (PATTERN (insn)) == PARALLEL) { int i; for (i = XVECLEN (PATTERN (insn), 0) - 1; i >= 0; i--) count_one_set (regs, insn, XVECEXP (PATTERN (insn), 0, i), last_set); } } if (LABEL_P (insn) || JUMP_P (insn)) memset (last_set, 0, regs->num * sizeof (rtx)); /* Invalidate all registers used for function argument passing. We check rtx_varies_p for the same reason as below, to allow optimizing PIC calculations. */ if (CALL_P (insn)) { rtx link; for (link = CALL_INSN_FUNCTION_USAGE (insn); link; link = XEXP (link, 1)) { rtx op, reg; if (GET_CODE (op = XEXP (link, 0)) == USE && REG_P (reg = XEXP (op, 0)) && rtx_varies_p (reg, 1)) regs->array[REGNO (reg)].may_not_optimize = 1; } } } /* Invalidate all hard registers clobbered by calls. With one exception: a call-clobbered PIC register is still function-invariant for our purposes, since we can hoist any PIC calculations out of the loop. Thus the call to rtx_varies_p. */ if (LOOP_INFO (loop)->has_call) for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) if (TEST_HARD_REG_BIT (regs_invalidated_by_call, i) && rtx_varies_p (regno_reg_rtx[i], 1)) { regs->array[i].may_not_optimize = 1; regs->array[i].set_in_loop = 1; } #ifdef AVOID_CCMODE_COPIES /* Don't try to move insns which set CC registers if we should not create CCmode register copies. */ for (i = regs->num - 1; i >= FIRST_PSEUDO_REGISTER; i--) if (GET_MODE_CLASS (GET_MODE (regno_reg_rtx[i])) == MODE_CC) regs->array[i].may_not_optimize = 1; #endif /* Set regs->array[I].n_times_set for the new registers. */ for (i = old_nregs; i < regs->num; i++) regs->array[i].n_times_set = regs->array[i].set_in_loop; free (last_set); } /* Returns the number of real INSNs in the LOOP. */ static int count_insns_in_loop (const struct loop *loop) { int count = 0; rtx insn; for (insn = loop->top ? loop->top : loop->start; insn != loop->end; insn = NEXT_INSN (insn)) if (INSN_P (insn)) ++count; return count; } /* Move MEMs into registers for the duration of the loop. */ static void load_mems (const struct loop *loop) { struct loop_info *loop_info = LOOP_INFO (loop); struct loop_regs *regs = LOOP_REGS (loop); int maybe_never = 0; int i; rtx p, prev_ebb_head; rtx label = NULL_RTX; rtx end_label; /* Nonzero if the next instruction may never be executed. */ int next_maybe_never = 0; unsigned int last_max_reg = max_reg_num (); if (loop_info->mems_idx == 0) return; /* We cannot use next_label here because it skips over normal insns. */ end_label = next_nonnote_insn (loop->end); if (end_label && !LABEL_P (end_label)) end_label = NULL_RTX; /* Check to see if it's possible that some instructions in the loop are never executed. Also check if there is a goto out of the loop other than right after the end of the loop. */ for (p = next_insn_in_loop (loop, loop->scan_start); p != NULL_RTX; p = next_insn_in_loop (loop, p)) { if (LABEL_P (p)) maybe_never = 1; else if (JUMP_P (p) /* If we enter the loop in the middle, and scan around to the beginning, don't set maybe_never for that. This must be an unconditional jump, otherwise the code at the top of the loop might never be executed. Unconditional jumps are followed a by barrier then loop end. */ && ! (JUMP_P (p) && JUMP_LABEL (p) == loop->top && NEXT_INSN (NEXT_INSN (p)) == loop->end && any_uncondjump_p (p))) { /* If this is a jump outside of the loop but not right after the end of the loop, we would have to emit new fixup sequences for each such label. */ if (/* If we can't tell where control might go when this JUMP_INSN is executed, we must be conservative. */ !JUMP_LABEL (p) || (JUMP_LABEL (p) != end_label && (INSN_UID (JUMP_LABEL (p)) >= max_uid_for_loop || INSN_LUID (JUMP_LABEL (p)) < INSN_LUID (loop->start) || INSN_LUID (JUMP_LABEL (p)) > INSN_LUID (loop->end)))) return; if (!any_condjump_p (p)) /* Something complicated. */ maybe_never = 1; else /* If there are any more instructions in the loop, they might not be reached. */ next_maybe_never = 1; } else if (next_maybe_never) maybe_never = 1; } /* Find start of the extended basic block that enters the loop. */ for (p = loop->start; PREV_INSN (p) && !LABEL_P (p); p = PREV_INSN (p)) ; prev_ebb_head = p; cselib_init (true); /* Build table of mems that get set to constant values before the loop. */ for (; p != loop->start; p = NEXT_INSN (p)) cselib_process_insn (p); /* Actually move the MEMs. */ for (i = 0; i < loop_info->mems_idx; ++i) { regset_head load_copies; regset_head store_copies; int written = 0; rtx reg; rtx mem = loop_info->mems[i].mem; rtx mem_list_entry; if (MEM_VOLATILE_P (mem) || loop_invariant_p (loop, XEXP (mem, 0)) != 1) /* There's no telling whether or not MEM is modified. */ loop_info->mems[i].optimize = 0; /* Go through the MEMs written to in the loop to see if this one is aliased by one of them. */ mem_list_entry = loop_info->store_mems; while (mem_list_entry) { if (rtx_equal_p (mem, XEXP (mem_list_entry, 0))) written = 1; else if (true_dependence (XEXP (mem_list_entry, 0), VOIDmode, mem, rtx_varies_p)) { /* MEM is indeed aliased by this store. */ loop_info->mems[i].optimize = 0; break; } mem_list_entry = XEXP (mem_list_entry, 1); } if (flag_float_store && written && GET_MODE_CLASS (GET_MODE (mem)) == MODE_FLOAT) loop_info->mems[i].optimize = 0; /* If this MEM is written to, we must be sure that there are no reads from another MEM that aliases this one. */ if (loop_info->mems[i].optimize && written) { int j; for (j = 0; j < loop_info->mems_idx; ++j) { if (j == i) continue; else if (true_dependence (mem, VOIDmode, loop_info->mems[j].mem, rtx_varies_p)) { /* It's not safe to hoist loop_info->mems[i] out of the loop because writes to it might not be seen by reads from loop_info->mems[j]. */ loop_info->mems[i].optimize = 0; break; } } } if (maybe_never && may_trap_p (mem)) /* We can't access the MEM outside the loop; it might cause a trap that wouldn't have happened otherwise. */ loop_info->mems[i].optimize = 0; if (!loop_info->mems[i].optimize) /* We thought we were going to lift this MEM out of the loop, but later discovered that we could not. */ continue; INIT_REG_SET (&load_copies); INIT_REG_SET (&store_copies); /* Allocate a pseudo for this MEM. We set REG_USERVAR_P in order to keep scan_loop from moving stores to this MEM out of the loop just because this REG is neither a user-variable nor used in the loop test. */ reg = gen_reg_rtx (GET_MODE (mem)); REG_USERVAR_P (reg) = 1; loop_info->mems[i].reg = reg; /* Now, replace all references to the MEM with the corresponding pseudos. */ maybe_never = 0; for (p = next_insn_in_loop (loop, loop->scan_start); p != NULL_RTX; p = next_insn_in_loop (loop, p)) { if (INSN_P (p)) { rtx set; set = single_set (p); /* See if this copies the mem into a register that isn't modified afterwards. We'll try to do copy propagation a little further on. */ if (set /* @@@ This test is _way_ too conservative. */ && ! maybe_never && REG_P (SET_DEST (set)) && REGNO (SET_DEST (set)) >= FIRST_PSEUDO_REGISTER && REGNO (SET_DEST (set)) < last_max_reg && regs->array[REGNO (SET_DEST (set))].n_times_set == 1 && rtx_equal_p (SET_SRC (set), mem)) SET_REGNO_REG_SET (&load_copies, REGNO (SET_DEST (set))); /* See if this copies the mem from a register that isn't modified afterwards. We'll try to remove the redundant copy later on by doing a little register renaming and copy propagation. This will help to untangle things for the BIV detection code. */ if (set && ! maybe_never && REG_P (SET_SRC (set)) && REGNO (SET_SRC (set)) >= FIRST_PSEUDO_REGISTER && REGNO (SET_SRC (set)) < last_max_reg && regs->array[REGNO (SET_SRC (set))].n_times_set == 1 && rtx_equal_p (SET_DEST (set), mem)) SET_REGNO_REG_SET (&store_copies, REGNO (SET_SRC (set))); /* If this is a call which uses / clobbers this memory location, we must not change the interface here. */ if (CALL_P (p) && reg_mentioned_p (loop_info->mems[i].mem, CALL_INSN_FUNCTION_USAGE (p))) { cancel_changes (0); loop_info->mems[i].optimize = 0; break; } else /* Replace the memory reference with the shadow register. */ replace_loop_mems (p, loop_info->mems[i].mem, loop_info->mems[i].reg, written); } if (LABEL_P (p) || JUMP_P (p)) maybe_never = 1; } if (! loop_info->mems[i].optimize) ; /* We found we couldn't do the replacement, so do nothing. */ else if (! apply_change_group ()) /* We couldn't replace all occurrences of the MEM. */ loop_info->mems[i].optimize = 0; else { /* Load the memory immediately before LOOP->START, which is the NOTE_LOOP_BEG. */ cselib_val *e = cselib_lookup (mem, VOIDmode, 0); rtx set; rtx best = mem; unsigned j; struct elt_loc_list *const_equiv = 0; reg_set_iterator rsi; if (e) { struct elt_loc_list *equiv; struct elt_loc_list *best_equiv = 0; for (equiv = e->locs; equiv; equiv = equiv->next) { if (CONSTANT_P (equiv->loc)) const_equiv = equiv; else if (REG_P (equiv->loc) /* Extending hard register lifetimes causes crash on SRC targets. Doing so on non-SRC is probably also not good idea, since we most probably have pseudoregister equivalence as well. */ && REGNO (equiv->loc) >= FIRST_PSEUDO_REGISTER) best_equiv = equiv; } /* Use the constant equivalence if that is cheap enough. */ if (! best_equiv) best_equiv = const_equiv; else if (const_equiv && (rtx_cost (const_equiv->loc, SET) <= rtx_cost (best_equiv->loc, SET))) { best_equiv = const_equiv; const_equiv = 0; } /* If best_equiv is nonzero, we know that MEM is set to a constant or register before the loop. We will use this knowledge to initialize the shadow register with that constant or reg rather than by loading from MEM. */ if (best_equiv) best = copy_rtx (best_equiv->loc); } set = gen_move_insn (reg, best); set = loop_insn_hoist (loop, set); if (REG_P (best)) { for (p = prev_ebb_head; p != loop->start; p = NEXT_INSN (p)) if (REGNO_LAST_UID (REGNO (best)) == INSN_UID (p)) { REGNO_LAST_UID (REGNO (best)) = INSN_UID (set); break; } } if (const_equiv) set_unique_reg_note (set, REG_EQUAL, copy_rtx (const_equiv->loc)); if (written) { if (label == NULL_RTX) { label = gen_label_rtx (); emit_label_after (label, loop->end); } /* Store the memory immediately after END, which is the NOTE_LOOP_END. */ set = gen_move_insn (copy_rtx (mem), reg); loop_insn_emit_after (loop, 0, label, set); } if (loop_dump_stream) { fprintf (loop_dump_stream, "Hoisted regno %d %s from ", REGNO (reg), (written ? "r/w" : "r/o")); print_rtl (loop_dump_stream, mem); fputc ('\n', loop_dump_stream); } /* Attempt a bit of copy propagation. This helps untangle the data flow, and enables {basic,general}_induction_var to find more bivs/givs. */ EXECUTE_IF_SET_IN_REG_SET (&load_copies, FIRST_PSEUDO_REGISTER, j, rsi) { try_copy_prop (loop, reg, j); } CLEAR_REG_SET (&load_copies); EXECUTE_IF_SET_IN_REG_SET (&store_copies, FIRST_PSEUDO_REGISTER, j, rsi) { try_swap_copy_prop (loop, reg, j); } CLEAR_REG_SET (&store_copies); } } /* Now, we need to replace all references to the previous exit label with the new one. */ if (label != NULL_RTX && end_label != NULL_RTX) for (p = loop->start; p != loop->end; p = NEXT_INSN (p)) if (JUMP_P (p) && JUMP_LABEL (p) == end_label) redirect_jump (p, label, false); cselib_finish (); } /* For communication between note_reg_stored and its caller. */ struct note_reg_stored_arg { int set_seen; rtx reg; }; /* Called via note_stores, record in SET_SEEN whether X, which is written, is equal to ARG. */ static void note_reg_stored (rtx x, rtx setter ATTRIBUTE_UNUSED, void *arg) { struct note_reg_stored_arg *t = (struct note_reg_stored_arg *) arg; if (t->reg == x) t->set_seen = 1; } /* Try to replace every occurrence of pseudo REGNO with REPLACEMENT. There must be exactly one insn that sets this pseudo; it will be deleted if all replacements succeed and we can prove that the register is not used after the loop. */ static void try_copy_prop (const struct loop *loop, rtx replacement, unsigned int regno) { /* This is the reg that we are copying from. */ rtx reg_rtx = regno_reg_rtx[regno]; rtx init_insn = 0; rtx insn; /* These help keep track of whether we replaced all uses of the reg. */ int replaced_last = 0; int store_is_first = 0; for (insn = next_insn_in_loop (loop, loop->scan_start); insn != NULL_RTX; insn = next_insn_in_loop (loop, insn)) { rtx set; /* Only substitute within one extended basic block from the initializing insn. */ if (LABEL_P (insn) && init_insn) break; if (! INSN_P (insn)) continue; /* Is this the initializing insn? */ set = single_set (insn); if (set && REG_P (SET_DEST (set)) && REGNO (SET_DEST (set)) == regno) { gcc_assert (!init_insn); init_insn = insn; if (REGNO_FIRST_UID (regno) == INSN_UID (insn)) store_is_first = 1; } /* Only substitute after seeing the initializing insn. */ if (init_insn && insn != init_insn) { struct note_reg_stored_arg arg; replace_loop_regs (insn, reg_rtx, replacement); if (REGNO_LAST_UID (regno) == INSN_UID (insn)) replaced_last = 1; /* Stop replacing when REPLACEMENT is modified. */ arg.reg = replacement; arg.set_seen = 0; note_stores (PATTERN (insn), note_reg_stored, &arg); if (arg.set_seen) { rtx note = find_reg_note (insn, REG_EQUAL, NULL); /* It is possible that we've turned previously valid REG_EQUAL to invalid, as we change the REGNO to REPLACEMENT and unlike REGNO, REPLACEMENT is modified, we get different meaning. */ if (note && reg_mentioned_p (replacement, XEXP (note, 0))) remove_note (insn, note); break; } } } gcc_assert (init_insn); if (apply_change_group ()) { if (loop_dump_stream) fprintf (loop_dump_stream, " Replaced reg %d", regno); if (store_is_first && replaced_last) { rtx first; rtx retval_note; /* Assume we're just deleting INIT_INSN. */ first = init_insn; /* Look for REG_RETVAL note. If we're deleting the end of the libcall sequence, the whole sequence can go. */ retval_note = find_reg_note (init_insn, REG_RETVAL, NULL_RTX); /* If we found a REG_RETVAL note, find the first instruction in the sequence. */ if (retval_note) first = XEXP (retval_note, 0); /* Delete the instructions. */ loop_delete_insns (first, init_insn); } if (loop_dump_stream) fprintf (loop_dump_stream, ".\n"); } } /* Replace all the instructions from FIRST up to and including LAST with NOTE_INSN_DELETED notes. */ static void loop_delete_insns (rtx first, rtx last) { while (1) { if (loop_dump_stream) fprintf (loop_dump_stream, ", deleting init_insn (%d)", INSN_UID (first)); delete_insn (first); /* If this was the LAST instructions we're supposed to delete, we're done. */ if (first == last) break; first = NEXT_INSN (first); } } /* Try to replace occurrences of pseudo REGNO with REPLACEMENT within loop LOOP if the order of the sets of these registers can be swapped. There must be exactly one insn within the loop that sets this pseudo followed immediately by a move insn that sets REPLACEMENT with REGNO. */ static void try_swap_copy_prop (const struct loop *loop, rtx replacement, unsigned int regno) { rtx insn; rtx set = NULL_RTX; unsigned int new_regno; new_regno = REGNO (replacement); for (insn = next_insn_in_loop (loop, loop->scan_start); insn != NULL_RTX; insn = next_insn_in_loop (loop, insn)) { /* Search for the insn that copies REGNO to NEW_REGNO? */ if (INSN_P (insn) && (set = single_set (insn)) && REG_P (SET_DEST (set)) && REGNO (SET_DEST (set)) == new_regno && REG_P (SET_SRC (set)) && REGNO (SET_SRC (set)) == regno) break; } if (insn != NULL_RTX) { rtx prev_insn; rtx prev_set; /* Some DEF-USE info would come in handy here to make this function more general. For now, just check the previous insn which is the most likely candidate for setting REGNO. */ prev_insn = PREV_INSN (insn); if (INSN_P (insn) && (prev_set = single_set (prev_insn)) && REG_P (SET_DEST (prev_set)) && REGNO (SET_DEST (prev_set)) == regno) { /* We have: (set (reg regno) (expr)) (set (reg new_regno) (reg regno)) so try converting this to: (set (reg new_regno) (expr)) (set (reg regno) (reg new_regno)) The former construct is often generated when a global variable used for an induction variable is shadowed by a register (NEW_REGNO). The latter construct improves the chances of GIV replacement and BIV elimination. */ validate_change (prev_insn, &SET_DEST (prev_set), replacement, 1); validate_change (insn, &SET_DEST (set), SET_SRC (set), 1); validate_change (insn, &SET_SRC (set), replacement, 1); if (apply_change_group ()) { if (loop_dump_stream) fprintf (loop_dump_stream, " Swapped set of reg %d at %d with reg %d at %d.\n", regno, INSN_UID (insn), new_regno, INSN_UID (prev_insn)); /* Update first use of REGNO. */ if (REGNO_FIRST_UID (regno) == INSN_UID (prev_insn)) REGNO_FIRST_UID (regno) = INSN_UID (insn); /* Now perform copy propagation to hopefully remove all uses of REGNO within the loop. */ try_copy_prop (loop, replacement, regno); } } } } /* Worker function for find_mem_in_note, called via for_each_rtx. */ static int find_mem_in_note_1 (rtx *x, void *data) { if (*x != NULL_RTX && MEM_P (*x)) { rtx *res = (rtx *) data; *res = *x; return 1; } return 0; } /* Returns the first MEM found in NOTE by depth-first search. */ static rtx find_mem_in_note (rtx note) { if (note && for_each_rtx (¬e, find_mem_in_note_1, ¬e)) return note; return NULL_RTX; } /* Replace MEM with its associated pseudo register. This function is called from load_mems via for_each_rtx. DATA is actually a pointer to a structure describing the instruction currently being scanned and the MEM we are currently replacing. */ static int replace_loop_mem (rtx *mem, void *data) { loop_replace_args *args = (loop_replace_args *) data; rtx m = *mem; if (m == NULL_RTX) return 0; switch (GET_CODE (m)) { case MEM: break; case CONST_DOUBLE: /* We're not interested in the MEM associated with a CONST_DOUBLE, so there's no need to traverse into one. */ return -1; default: /* This is not a MEM. */ return 0; } if (!rtx_equal_p (args->match, m)) /* This is not the MEM we are currently replacing. */ return 0; /* Actually replace the MEM. */ validate_change (args->insn, mem, args->replacement, 1); return 0; } static void replace_loop_mems (rtx insn, rtx mem, rtx reg, int written) { loop_replace_args args; args.insn = insn; args.match = mem; args.replacement = reg; for_each_rtx (&insn, replace_loop_mem, &args); /* If we hoist a mem write out of the loop, then REG_EQUAL notes referring to the mem are no longer valid. */ if (written) { rtx note, sub; rtx *link; for (link = ®_NOTES (insn); (note = *link); link = &XEXP (note, 1)) { if (REG_NOTE_KIND (note) == REG_EQUAL && (sub = find_mem_in_note (note)) && true_dependence (mem, VOIDmode, sub, rtx_varies_p)) { /* Remove the note. */ validate_change (NULL_RTX, link, XEXP (note, 1), 1); break; } } } } /* Replace one register with another. Called through for_each_rtx; PX points to the rtx being scanned. DATA is actually a pointer to a structure of arguments. */ static int replace_loop_reg (rtx *px, void *data) { rtx x = *px; loop_replace_args *args = (loop_replace_args *) data; if (x == NULL_RTX) return 0; if (x == args->match) validate_change (args->insn, px, args->replacement, 1); return 0; } static void replace_loop_regs (rtx insn, rtx reg, rtx replacement) { loop_replace_args args; args.insn = insn; args.match = reg; args.replacement = replacement; for_each_rtx (&insn, replace_loop_reg, &args); } /* Emit insn for PATTERN after WHERE_INSN in basic block WHERE_BB (ignored in the interim). */ static rtx loop_insn_emit_after (const struct loop *loop ATTRIBUTE_UNUSED, basic_block where_bb ATTRIBUTE_UNUSED, rtx where_insn, rtx pattern) { return emit_insn_after (pattern, where_insn); } /* If WHERE_INSN is nonzero emit insn for PATTERN before WHERE_INSN in basic block WHERE_BB (ignored in the interim) within the loop otherwise hoist PATTERN into the loop pre-header. */ static rtx loop_insn_emit_before (const struct loop *loop, basic_block where_bb ATTRIBUTE_UNUSED, rtx where_insn, rtx pattern) { if (! where_insn) return loop_insn_hoist (loop, pattern); return emit_insn_before (pattern, where_insn); } /* Emit call insn for PATTERN before WHERE_INSN in basic block WHERE_BB (ignored in the interim) within the loop. */ static rtx loop_call_insn_emit_before (const struct loop *loop ATTRIBUTE_UNUSED, basic_block where_bb ATTRIBUTE_UNUSED, rtx where_insn, rtx pattern) { return emit_call_insn_before (pattern, where_insn); } /* Hoist insn for PATTERN into the loop pre-header. */ static rtx loop_insn_hoist (const struct loop *loop, rtx pattern) { return loop_insn_emit_before (loop, 0, loop->start, pattern); } /* Hoist call insn for PATTERN into the loop pre-header. */ static rtx loop_call_insn_hoist (const struct loop *loop, rtx pattern) { return loop_call_insn_emit_before (loop, 0, loop->start, pattern); } /* Sink insn for PATTERN after the loop end. */ static rtx loop_insn_sink (const struct loop *loop, rtx pattern) { return loop_insn_emit_before (loop, 0, loop->sink, pattern); } /* bl->final_value can be either general_operand or PLUS of general_operand and constant. Emit sequence of instructions to load it into REG. */ static rtx gen_load_of_final_value (rtx reg, rtx final_value) { rtx seq; start_sequence (); final_value = force_operand (final_value, reg); if (final_value != reg) emit_move_insn (reg, final_value); seq = get_insns (); end_sequence (); return seq; } /* If the loop has multiple exits, emit insn for PATTERN before the loop to ensure that it will always be executed no matter how the loop exits. Otherwise, emit the insn for PATTERN after the loop, since this is slightly more efficient. */ static rtx loop_insn_sink_or_swim (const struct loop *loop, rtx pattern) { if (loop->exit_count) return loop_insn_hoist (loop, pattern); else return loop_insn_sink (loop, pattern); } static void loop_ivs_dump (const struct loop *loop, FILE *file, int verbose) { struct iv_class *bl; int iv_num = 0; if (! loop || ! file) return; for (bl = LOOP_IVS (loop)->list; bl; bl = bl->next) iv_num++; fprintf (file, "Loop %d: %d IV classes\n", loop->num, iv_num); for (bl = LOOP_IVS (loop)->list; bl; bl = bl->next) { loop_iv_class_dump (bl, file, verbose); fputc ('\n', file); } } static void loop_iv_class_dump (const struct iv_class *bl, FILE *file, int verbose ATTRIBUTE_UNUSED) { struct induction *v; rtx incr; int i; if (! bl || ! file) return; fprintf (file, "IV class for reg %d, benefit %d\n", bl->regno, bl->total_benefit); fprintf (file, " Init insn %d", INSN_UID (bl->init_insn)); if (bl->initial_value) { fprintf (file, ", init val: "); print_simple_rtl (file, bl->initial_value); } if (bl->initial_test) { fprintf (file, ", init test: "); print_simple_rtl (file, bl->initial_test); } fputc ('\n', file); if (bl->final_value) { fprintf (file, " Final val: "); print_simple_rtl (file, bl->final_value); fputc ('\n', file); } if ((incr = biv_total_increment (bl))) { fprintf (file, " Total increment: "); print_simple_rtl (file, incr); fputc ('\n', file); } /* List the increments. */ for (i = 0, v = bl->biv; v; v = v->next_iv, i++) { fprintf (file, " Inc%d: insn %d, incr: ", i, INSN_UID (v->insn)); print_simple_rtl (file, v->add_val); fputc ('\n', file); } /* List the givs. */ for (i = 0, v = bl->giv; v; v = v->next_iv, i++) { fprintf (file, " Giv%d: insn %d, benefit %d, ", i, INSN_UID (v->insn), v->benefit); if (v->giv_type == DEST_ADDR) print_simple_rtl (file, v->mem); else print_simple_rtl (file, single_set (v->insn)); fputc ('\n', file); } } static void loop_biv_dump (const struct induction *v, FILE *file, int verbose) { if (! v || ! file) return; fprintf (file, "Biv %d: insn %d", REGNO (v->dest_reg), INSN_UID (v->insn)); fprintf (file, " const "); print_simple_rtl (file, v->add_val); if (verbose && v->final_value) { fputc ('\n', file); fprintf (file, " final "); print_simple_rtl (file, v->final_value); } fputc ('\n', file); } static void loop_giv_dump (const struct induction *v, FILE *file, int verbose) { if (! v || ! file) return; if (v->giv_type == DEST_REG) fprintf (file, "Giv %d: insn %d", REGNO (v->dest_reg), INSN_UID (v->insn)); else fprintf (file, "Dest address: insn %d", INSN_UID (v->insn)); fprintf (file, " src reg %d benefit %d", REGNO (v->src_reg), v->benefit); fprintf (file, " lifetime %d", v->lifetime); if (v->replaceable) fprintf (file, " replaceable"); if (v->no_const_addval) fprintf (file, " ncav"); if (v->ext_dependent) { switch (GET_CODE (v->ext_dependent)) { case SIGN_EXTEND: fprintf (file, " ext se"); break; case ZERO_EXTEND: fprintf (file, " ext ze"); break; case TRUNCATE: fprintf (file, " ext tr"); break; default: gcc_unreachable (); } } fputc ('\n', file); fprintf (file, " mult "); print_simple_rtl (file, v->mult_val); fputc ('\n', file); fprintf (file, " add "); print_simple_rtl (file, v->add_val); if (verbose && v->final_value) { fputc ('\n', file); fprintf (file, " final "); print_simple_rtl (file, v->final_value); } fputc ('\n', file); } void debug_ivs (const struct loop *loop) { loop_ivs_dump (loop, stderr, 1); } void debug_iv_class (const struct iv_class *bl) { loop_iv_class_dump (bl, stderr, 1); } void debug_biv (const struct induction *v) { loop_biv_dump (v, stderr, 1); } void debug_giv (const struct induction *v) { loop_giv_dump (v, stderr, 1); } #define LOOP_BLOCK_NUM_1(INSN) \ ((INSN) ? (BLOCK_FOR_INSN (INSN) ? BLOCK_NUM (INSN) : - 1) : -1) /* The notes do not have an assigned block, so look at the next insn. */ #define LOOP_BLOCK_NUM(INSN) \ ((INSN) ? (NOTE_P (INSN) \ ? LOOP_BLOCK_NUM_1 (next_nonnote_insn (INSN)) \ : LOOP_BLOCK_NUM_1 (INSN)) \ : -1) #define LOOP_INSN_UID(INSN) ((INSN) ? INSN_UID (INSN) : -1) static void loop_dump_aux (const struct loop *loop, FILE *file, int verbose ATTRIBUTE_UNUSED) { rtx label; if (! loop || ! file || !BB_HEAD (loop->first)) return; /* Print diagnostics to compare our concept of a loop with what the loop notes say. */ if (! PREV_INSN (BB_HEAD (loop->first)) || !NOTE_P (PREV_INSN (BB_HEAD (loop->first))) || NOTE_LINE_NUMBER (PREV_INSN (BB_HEAD (loop->first))) != NOTE_INSN_LOOP_BEG) fprintf (file, ";; No NOTE_INSN_LOOP_BEG at %d\n", INSN_UID (PREV_INSN (BB_HEAD (loop->first)))); if (! NEXT_INSN (BB_END (loop->last)) || !NOTE_P (NEXT_INSN (BB_END (loop->last))) || NOTE_LINE_NUMBER (NEXT_INSN (BB_END (loop->last))) != NOTE_INSN_LOOP_END) fprintf (file, ";; No NOTE_INSN_LOOP_END at %d\n", INSN_UID (NEXT_INSN (BB_END (loop->last)))); if (loop->start) { fprintf (file, ";; start %d (%d), end %d (%d)\n", LOOP_BLOCK_NUM (loop->start), LOOP_INSN_UID (loop->start), LOOP_BLOCK_NUM (loop->end), LOOP_INSN_UID (loop->end)); fprintf (file, ";; top %d (%d), scan start %d (%d)\n", LOOP_BLOCK_NUM (loop->top), LOOP_INSN_UID (loop->top), LOOP_BLOCK_NUM (loop->scan_start), LOOP_INSN_UID (loop->scan_start)); fprintf (file, ";; exit_count %d", loop->exit_count); if (loop->exit_count) { fputs (", labels:", file); for (label = loop->exit_labels; label; label = LABEL_NEXTREF (label)) { fprintf (file, " %d ", LOOP_INSN_UID (XEXP (label, 0))); } } fputs ("\n", file); } } /* Call this function from the debugger to dump LOOP. */ void debug_loop (const struct loop *loop) { flow_loop_dump (loop, stderr, loop_dump_aux, 1); } /* Call this function from the debugger to dump LOOPS. */ void debug_loops (const struct loops *loops) { flow_loops_dump (loops, stderr, loop_dump_aux, 1); } static bool gate_handle_loop_optimize (void) { return (optimize > 0 && flag_loop_optimize); } /* Move constant computations out of loops. */ static void rest_of_handle_loop_optimize (void) { int do_prefetch; /* CFG is no longer maintained up-to-date. */ free_bb_for_insn (); profile_status = PROFILE_ABSENT; do_prefetch = flag_prefetch_loop_arrays ? LOOP_PREFETCH : 0; if (flag_rerun_loop_opt) { cleanup_barriers (); /* We only want to perform unrolling once. */ loop_optimize (get_insns (), dump_file, 0); /* The first call to loop_optimize makes some instructions trivially dead. We delete those instructions now in the hope that doing so will make the heuristics in loop work better and possibly speed up compilation. */ delete_trivially_dead_insns (get_insns (), max_reg_num ()); /* The regscan pass is currently necessary as the alias analysis code depends on this information. */ reg_scan (get_insns (), max_reg_num ()); } cleanup_barriers (); loop_optimize (get_insns (), dump_file, do_prefetch); /* Loop can create trivially dead instructions. */ delete_trivially_dead_insns (get_insns (), max_reg_num ()); find_basic_blocks (get_insns ()); } struct tree_opt_pass pass_loop_optimize = { "old-loop", /* name */ gate_handle_loop_optimize, /* gate */ rest_of_handle_loop_optimize, /* execute */ NULL, /* sub */ NULL, /* next */ 0, /* static_pass_number */ TV_LOOP, /* tv_id */ 0, /* properties_required */ 0, /* properties_provided */ 0, /* properties_destroyed */ 0, /* todo_flags_start */ TODO_dump_func | TODO_ggc_collect, /* todo_flags_finish */ 'L' /* letter */ };