\input texinfo
@setfilename cppinternals.info
@settitle The GNU C Preprocessor Internals

@ifinfo
@dircategory Programming
@direntry
* Cpplib: (cppinternals).      Cpplib internals.
@end direntry
@end ifinfo

@c @smallbook
@c @cropmarks
@c @finalout
@setchapternewpage odd
@ifinfo
This file documents the internals of the GNU C Preprocessor.

Copyright 2000, 2001 Free Software Foundation, Inc.

Permission is granted to make and distribute verbatim copies of
this manual provided the copyright notice and this permission notice
are preserved on all copies.

@ignore
Permission is granted to process this file through Tex and print the
results, provided the printed document carries copying permission
notice identical to this one except for the removal of this paragraph
(this paragraph not being relevant to the printed manual).

@end ignore
Permission is granted to copy and distribute modified versions of this
manual under the conditions for verbatim copying, provided also that
the entire resulting derived work is distributed under the terms of a
permission notice identical to this one.

Permission is granted to copy and distribute translations of this manual
into another language, under the above conditions for modified versions.
@end ifinfo

@titlepage
@c @finalout
@title Cpplib Internals
@subtitle Last revised Jan 2001
@subtitle for GCC version 3.0
@author Neil Booth
@page
@vskip 0pt plus 1filll
@c man begin COPYRIGHT
Copyright @copyright{} 2000, 2001
Free Software Foundation, Inc.

Permission is granted to make and distribute verbatim copies of
this manual provided the copyright notice and this permission notice
are preserved on all copies.

Permission is granted to copy and distribute modified versions of this
manual under the conditions for verbatim copying, provided also that
the entire resulting derived work is distributed under the terms of a
permission notice identical to this one.

Permission is granted to copy and distribute translations of this manual
into another language, under the above conditions for modified versions.
@c man end
@end titlepage
@page

@node Top, Conventions,, (DIR)
@chapter Cpplib - the core of the GNU C Preprocessor

The GNU C preprocessor in GCC 3.0 has been completely rewritten.  It is
now implemented as a library, cpplib, so it can be easily shared between
a stand-alone preprocessor, and a preprocessor integrated with the C,
C++ and Objective C front ends.  It is also available for use by other
programs, though this is not recommended as its exposed interface has
not yet reached a point of reasonable stability.

This library has been written to be re-entrant, so that it can be used
to preprocess many files simultaneously if necessary.  It has also been
written with the preprocessing token as the fundamental unit; the
preprocessor in previous versions of GCC would operate on text strings
as the fundamental unit.

This brief manual documents some of the internals of cpplib, and a few
tricky issues encountered.  It also describes certain behaviour we would
like to preserve, such as the format and spacing of its output.

Identifiers, macro expansion, hash nodes, lexing.

@menu
* Conventions::	    Conventions used in the code.
* Lexer::	    The combined C, C++ and Objective C Lexer.
* Whitespace::      Input and output newlines and whitespace.
* Hash Nodes::      All identifiers are hashed.
* Macro Expansion:: Macro expansion algorithm.
* Files::	    File handling.
* Index::           Index.
@end menu

@node Conventions, Lexer, Top, Top
@unnumbered Conventions
@cindex interface
@cindex header files

cpplib has two interfaces - one is exposed internally only, and the
other is for both internal and external use.

The convention is that functions and types that are exposed to multiple
files internally are prefixed with @samp{_cpp_}, and are to be found in
the file @samp{cpphash.h}.  Functions and types exposed to external
clients are in @samp{cpplib.h}, and prefixed with @samp{cpp_}.  For
historical reasons this is no longer quite true, but we should strive to
stick to it.

We are striving to reduce the information exposed in cpplib.h to the
bare minimum necessary, and then to keep it there.  This makes clear
exactly what external clients are entitled to assume, and allows us to
change internals in the future without worrying whether library clients
are perhaps relying on some kind of undocumented implementation-specific
behaviour.

@node Lexer, Whitespace, Conventions, Top
@unnumbered The Lexer
@cindex lexer
@cindex tokens

The lexer is contained in the file @samp{cpplex.c}.  We want to have a
lexer that is single-pass, for efficiency reasons.  We would also like
the lexer to only step forwards through the input files, and not step
back.  This will make future changes to support different character
sets, in particular state or shift-dependent ones, much easier.

This file also contains all information needed to spell a token, i.e. to
output it either in a diagnostic or to a preprocessed output file.  This
information is not exported, but made available to clients through such
functions as @samp{cpp_spell_token} and @samp{cpp_token_len}.

The most painful aspect of lexing ISO-standard C and C++ is handling
trigraphs and backlash-escaped newlines.  Trigraphs are processed before
any interpretation of the meaning of a character is made, and unfortunately
there is a trigraph representation for a backslash, so it is possible for
the trigraph @samp{??/} to introduce an escaped newline.

Escaped newlines are tedious because theoretically they can occur
anywhere - between the @samp{+} and @samp{=} of the @samp{+=} token,
within the characters of an identifier, and even between the @samp{*}
and @samp{/} that terminates a comment.  Moreover, you cannot be sure
there is just one - there might be an arbitrarily long sequence of them.

So the routine @samp{parse_identifier}, that lexes an identifier, cannot
assume that it can scan forwards until the first non-identifier
character and be done with it, because this could be the @samp{\}
introducing an escaped newline, or the @samp{?} introducing the trigraph
sequence that represents the @samp{\} of an escaped newline.  Similarly
for the routine that handles numbers, @samp{parse_number}.  If these
routines stumble upon a @samp{?} or @samp{\}, they call
@samp{skip_escaped_newlines} to skip over any potential escaped newlines
before checking whether they can finish.

Similarly code in the main body of @samp{_cpp_lex_token} cannot simply
check for a @samp{=} after a @samp{+} character to determine whether it
has a @samp{+=} token; it needs to be prepared for an escaped newline of
some sort.  These cases use the function @samp{get_effective_char},
which returns the first character after any intervening newlines.

The lexer needs to keep track of the correct column position,
including counting tabs as specified by the @samp{-ftabstop=} option.
This should be done even within comments; C-style comments can appear in
the middle of a line, and we want to report diagnostics in the correct
position for text appearing after the end of the comment.

Some identifiers, such as @samp{__VA_ARGS__} and poisoned identifiers,
may be invalid and require a diagnostic.  However, if they appear in a
macro expansion we don't want to complain with each use of the macro.
It is therefore best to catch them during the lexing stage, in
@samp{parse_identifier}.  In both cases, whether a diagnostic is needed
or not is dependent upon lexer state.  For example, we don't want to
issue a diagnostic for re-poisoning a poisoned identifier, or for using
@samp{__VA_ARGS__} in the expansion of a variable-argument macro.
Therefore @samp{parse_identifier} makes use of flags to determine
whether a diagnostic is appropriate.  Since we change state on a
per-token basis, and don't lex whole lines at a time, this is not a
problem.

Another place where state flags are used to change behaviour is whilst
parsing header names.  Normally, a @samp{<} would be lexed as a single
token.  After a @code{#include} directive, though, it should be lexed
as a single token as far as the nearest @samp{>} character.  Note that
we don't allow the terminators of header names to be escaped; the first
@samp{"} or @samp{>} terminates the header name.

Interpretation of some character sequences depends upon whether we are
lexing C, C++ or Objective C, and on the revision of the standard in
force.  For example, @samp{::} is a single token in C++, but two
separate @samp{:} tokens, and almost certainly a syntax error, in C.
Such cases are handled in the main function @samp{_cpp_lex_token}, based
upon the flags set in the @samp{cpp_options} structure.

Note we have almost, but not quite, achieved the goal of not stepping
backwards in the input stream.  Currently @samp{skip_escaped_newlines}
does step back, though with care it should be possible to adjust it so
that this does not happen.  For example, one tricky issue is if we meet
a trigraph, but the command line option @samp{-trigraphs} is not in
force but @samp{-Wtrigraphs} is, we need to warn about it but then
buffer it and continue to treat it as 3 separate characters.

@node Whitespace, Hash Nodes, Lexer, Top
@unnumbered Whitespace
@cindex whitespace
@cindex newlines
@cindex escaped newlines
@cindex paste avoidance
@cindex line numbers

The lexer has been written to treat each of @samp{\r}, @samp{\n},
@samp{\r\n} and @samp{\n\r} as a single new line indicator.  This allows
it to transparently preprocess MS-DOS, Macintosh and Unix files without
their needing to pass through a special filter beforehand.

We also decided to treat a backslash, either @samp{\} or the trigraph
@samp{??/}, separated from one of the above newline indicators by
non-comment whitespace only, as intending to escape the newline.  It
tends to be a typing mistake, and cannot reasonably be mistaken for
anything else in any of the C-family grammars.  Since handling it this
way is not strictly conforming to the ISO standard, the library issues a
warning wherever it encounters it.

Handling newlines like this is made simpler by doing it in one place
only.  The function @samp{handle_newline} takes care of all newline
characters, and @samp{skip_escaped_newlines} takes care of arbitrarily
long sequences of escaped newlines, deferring to @samp{handle_newline}
to handle the newlines themselves.

Another whitespace issue only concerns the stand-alone preprocessor: we
want to guarantee that re-reading the preprocessed output results in an
identical token stream.  Without taking special measures, this might not
be the case because of macro substitution.  We could simply insert a
space between adjacent tokens, but ideally we would like to keep this to
a minimum, both for aesthetic reasons and because it causes problems for
people who still try to abuse the preprocessor for things like Fortran
source and Makefiles.

The token structure contains a flags byte, and two flags are of interest
here: @samp{PREV_WHITE} and @samp{AVOID_LPASTE}.  @samp{PREV_WHITE}
indicates that the token was preceded by whitespace; if this is the case
we need not worry about it incorrectly pasting with its predecessor.
The @samp{AVOID_LPASTE} flag is set by the macro expansion routines, and
indicates that paste avoidance by insertion of a space to the left of
the token may be necessary.  Recursively, the first token of a macro
substitution, the first token after a macro substitution, the first
token of a substituted argument, and the first token after a substituted
argument are all flagged @samp{AVOID_LPASTE} by the macro expander.

If a token flagged in this way does not have a @samp{PREV_WHITE} flag,
and the routine @var{cpp_avoid_paste} determines that it might be
misinterpreted by the lexer if a space is not inserted between it and
the immediately preceding token, then stand-alone CPP's output routines
will insert a space between them.  To avoid excessive spacing,
@var{cpp_avoid_paste} tries hard to only request a space if one is
likely to be necessary, but for reasons of efficiency it is slightly
conservative and might recommend a space where one is not strictly
needed.

Finally, the preprocessor takes great care to ensure it keeps track of
both the position of a token in the source file, for diagnostic
purposes, and where it should appear in the output file, because using
CPP for other languages like assembler requires this.  The two positions
may differ for the following reasons:

@itemize @bullet
@item
Escaped newlines are deleted, so lines spliced in this way are joined to
form a single logical line.

@item
A macro expansion replaces the tokens that form its invocation, but any
newlines appearing in the macro's arguments are interpreted as a single
space, with the result that the macro's replacement appears in full on
the same line that the macro name appeared in the source file.  This is
particularly important for stringification of arguments - newlines
embedded in the arguments must appear in the string as spaces.
@end itemize

The source file location is maintained in the @var{lineno} member of the
@var{cpp_buffer} structure, and the column number inferred from the
current position in the buffer relative to the @var{line_base} buffer
variable, which is updated with every newline whether escaped or not.

TODO: Finish this.

@node Hash Nodes, Macro Expansion, Whitespace, Top
@unnumbered Hash Nodes
@cindex hash table
@cindex identifiers
@cindex macros
@cindex assertions
@cindex named operators

When cpplib encounters an "identifier", it generates a hash code for it
and stores it in the hash table.  By "identifier" we mean tokens with
type @samp{CPP_NAME}; this includes identifiers in the usual C sense, as
well as keywords, directive names, macro names and so on.  For example,
all of "pragma", "int", "foo" and "__GNUC__" are identifiers and hashed
when lexed.

Each node in the hash table contain various information about the
identifier it represents.  For example, its length and type.  At any one
time, each identifier falls into exactly one of three categories:

@itemize @bullet
@item Macros

These have been declared to be macros, either on the command line or
with @code{#define}.  A few, such as @samp{__TIME__} are builtins
entered in the hash table during initialisation.  The hash node for a
normal macro points to a structure with more information about the
macro, such as whether it is function-like, how many arguments it takes,
and its expansion.  Builtin macros are flagged as special, and instead
contain an enum indicating which of the various builtin macros it is.

@item Assertions

Assertions are in a separate namespace to macros.  To enforce this, cpp
actually prepends a @code{#} character before hashing and entering it in
the hash table.  An assertion's node points to a chain of answers to
that assertion.

@item Void

Everything else falls into this category - an identifier that is not
currently a macro, or a macro that has since been undefined with
@code{#undef}.

When preprocessing C++, this category also includes the named operators,
such as @samp{xor}.  In expressions these behave like the operators they
represent, but in contexts where the spelling of a token matters they
are spelt differently.  This spelling distinction is relevant when they
are operands of the stringizing and pasting macro operators @code{#} and
@code{##}.  Named operator hash nodes are flagged, both to catch the
spelling distinction and to prevent them from being defined as macros.
@end itemize

The same identifiers share the same hash node.  Since each identifier
token, after lexing, contains a pointer to its hash node, this is used
to provide rapid lookup of various information.  For example, when
parsing a @code{#define} statement, CPP flags each argument's identifier
hash node with the index of that argument.  This makes duplicated
argument checking an O(1) operation for each argument.  Similarly, for
each identifier in the macro's expansion, lookup to see if it is an
argument, and which argument it is, is also an O(1) operation.  Further,
each directive name, such as @samp{endif}, has an associated directive
enum stored in its hash node, so that directive lookup is also O(1).

@node Macro Expansion, Files, Hash Nodes, Top
@unnumbered Macro Expansion Algorithm

@node Files, Index, Macro Expansion, Top
@unnumbered File Handling
@cindex files

Fairly obviously, the file handling code of cpplib resides in the file
@samp{cppfiles.c}.  It takes care of the details of file searching,
opening, reading and caching, for both the main source file and all the
headers it recursively includes.

The basic strategy is to minimize the number of system calls.  On many
systems, the basic @code{open ()} and @code{fstat ()} system calls can
be quite expensive.  For every @code{#include}-d file, we need to try
all the directories in the search path until we find a match.  Some
projects, such as glibc, pass twenty or thirty include paths on the
command line, so this can rapidly become time consuming.

For a header file we have not encountered before we have little choice
but to do this.  However, it is often the case that the same headers are
repeatedly included, and in these cases we try to avoid repeating the
filesystem queries whilst searching for the correct file.

For each file we try to open, we store the constructed path in a splay
tree.  This path first undergoes simplification by the function
@code{_cpp_simplify_pathname}.  For example,
@samp{/usr/include/bits/../foo.h} is simplified to
@samp{/usr/include/foo.h} before we enter it in the splay tree and try
to @code{open ()} the file.  CPP will then find subsequent uses of
@samp{foo.h}, even as @samp{/usr/include/foo.h}, in the splay tree and
save system calls.

Further, it is likely the file contents have also been cached, saving a
@code{read ()} system call.  We don't bother caching the contents of
header files that are re-inclusion protected, and whose re-inclusion
macro is defined when we leave the header file for the first time.  If
the host supports it, we try to map suitably large files into memory,
rather than reading them in directly.

The include paths are internally stored on a null-terminated
singly-linked list, starting with the @code{"header.h"} directory search
chain, which then links into the @code{<header.h>} directory chain.

Files included with the @code{<foo.h>} syntax start the lookup directly
in the second half of this chain.  However, files included with the
@code{"foo.h"} syntax start at the beginning of the chain, but with one
extra directory prepended.  This is the directory of the current file;
the one containing the @code{#include} directive.  Prepending this
directory on a per-file basis is handled by the function
@code{search_from}.

Note that a header included with a directory component, such as
@code{#include "mydir/foo.h"} and opened as
@samp{/usr/local/include/mydir/foo.h}, will have the complete path minus
the basename @samp{foo.h} as the current directory.

Enough information is stored in the splay tree that CPP can immediately
tell whether it can skip the header file because of the multiple include
optimisation, whether the file didn't exist or couldn't be opened for
some reason, or whether the header was flagged not to be re-used, as it
is with the obsolete @code{#import} directive.

For the benefit of MS-DOS filesystems with an 8.3 filename limitation,
CPP offers the ability to treat various include file names as aliases
for the real header files with shorter names.  The map from one to the
other is found in a special file called @samp{header.gcc}, stored in the
command line (or system) include directories to which the mapping
applies.  This may be higher up the directory tree than the full path to
the file minus the base name.

@node Index,, Files, Top
@unnumbered Index
@printindex cp

@contents
@bye