/* Subroutines for insn-output.c for SPARC. Copyright (C) 1987, 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc. Contributed by Michael Tiemann (tiemann@cygnus.com) 64-bit SPARC-V9 support by Michael Tiemann, Jim Wilson, and Doug Evans, at Cygnus Support. This file is part of GCC. GCC is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. GCC is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GCC; see the file COPYING. If not, write to the Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #include "config.h" #include "system.h" #include "coretypes.h" #include "tm.h" #include "tree.h" #include "rtl.h" #include "regs.h" #include "hard-reg-set.h" #include "real.h" #include "insn-config.h" #include "conditions.h" #include "output.h" #include "insn-attr.h" #include "flags.h" #include "function.h" #include "expr.h" #include "optabs.h" #include "recog.h" #include "toplev.h" #include "ggc.h" #include "tm_p.h" #include "debug.h" #include "target.h" #include "target-def.h" #include "cfglayout.h" #include "tree-gimple.h" /* Processor costs */ static const struct processor_costs cypress_costs = { COSTS_N_INSNS (2), /* int load */ COSTS_N_INSNS (2), /* int signed load */ COSTS_N_INSNS (2), /* int zeroed load */ COSTS_N_INSNS (2), /* float load */ COSTS_N_INSNS (5), /* fmov, fneg, fabs */ COSTS_N_INSNS (5), /* fadd, fsub */ COSTS_N_INSNS (1), /* fcmp */ COSTS_N_INSNS (1), /* fmov, fmovr */ COSTS_N_INSNS (7), /* fmul */ COSTS_N_INSNS (37), /* fdivs */ COSTS_N_INSNS (37), /* fdivd */ COSTS_N_INSNS (63), /* fsqrts */ COSTS_N_INSNS (63), /* fsqrtd */ COSTS_N_INSNS (1), /* imul */ COSTS_N_INSNS (1), /* imulX */ 0, /* imul bit factor */ COSTS_N_INSNS (1), /* idiv */ COSTS_N_INSNS (1), /* idivX */ COSTS_N_INSNS (1), /* movcc/movr */ 0, /* shift penalty */ }; static const struct processor_costs supersparc_costs = { COSTS_N_INSNS (1), /* int load */ COSTS_N_INSNS (1), /* int signed load */ COSTS_N_INSNS (1), /* int zeroed load */ COSTS_N_INSNS (0), /* float load */ COSTS_N_INSNS (3), /* fmov, fneg, fabs */ COSTS_N_INSNS (3), /* fadd, fsub */ COSTS_N_INSNS (3), /* fcmp */ COSTS_N_INSNS (1), /* fmov, fmovr */ COSTS_N_INSNS (3), /* fmul */ COSTS_N_INSNS (6), /* fdivs */ COSTS_N_INSNS (9), /* fdivd */ COSTS_N_INSNS (12), /* fsqrts */ COSTS_N_INSNS (12), /* fsqrtd */ COSTS_N_INSNS (4), /* imul */ COSTS_N_INSNS (4), /* imulX */ 0, /* imul bit factor */ COSTS_N_INSNS (4), /* idiv */ COSTS_N_INSNS (4), /* idivX */ COSTS_N_INSNS (1), /* movcc/movr */ 1, /* shift penalty */ }; static const struct processor_costs hypersparc_costs = { COSTS_N_INSNS (1), /* int load */ COSTS_N_INSNS (1), /* int signed load */ COSTS_N_INSNS (1), /* int zeroed load */ COSTS_N_INSNS (1), /* float load */ COSTS_N_INSNS (1), /* fmov, fneg, fabs */ COSTS_N_INSNS (1), /* fadd, fsub */ COSTS_N_INSNS (1), /* fcmp */ COSTS_N_INSNS (1), /* fmov, fmovr */ COSTS_N_INSNS (1), /* fmul */ COSTS_N_INSNS (8), /* fdivs */ COSTS_N_INSNS (12), /* fdivd */ COSTS_N_INSNS (17), /* fsqrts */ COSTS_N_INSNS (17), /* fsqrtd */ COSTS_N_INSNS (17), /* imul */ COSTS_N_INSNS (17), /* imulX */ 0, /* imul bit factor */ COSTS_N_INSNS (17), /* idiv */ COSTS_N_INSNS (17), /* idivX */ COSTS_N_INSNS (1), /* movcc/movr */ 0, /* shift penalty */ }; static const struct processor_costs sparclet_costs = { COSTS_N_INSNS (3), /* int load */ COSTS_N_INSNS (3), /* int signed load */ COSTS_N_INSNS (1), /* int zeroed load */ COSTS_N_INSNS (1), /* float load */ COSTS_N_INSNS (1), /* fmov, fneg, fabs */ COSTS_N_INSNS (1), /* fadd, fsub */ COSTS_N_INSNS (1), /* fcmp */ COSTS_N_INSNS (1), /* fmov, fmovr */ COSTS_N_INSNS (1), /* fmul */ COSTS_N_INSNS (1), /* fdivs */ COSTS_N_INSNS (1), /* fdivd */ COSTS_N_INSNS (1), /* fsqrts */ COSTS_N_INSNS (1), /* fsqrtd */ COSTS_N_INSNS (5), /* imul */ COSTS_N_INSNS (5), /* imulX */ 0, /* imul bit factor */ COSTS_N_INSNS (5), /* idiv */ COSTS_N_INSNS (5), /* idivX */ COSTS_N_INSNS (1), /* movcc/movr */ 0, /* shift penalty */ }; static const struct processor_costs ultrasparc_costs = { COSTS_N_INSNS (2), /* int load */ COSTS_N_INSNS (3), /* int signed load */ COSTS_N_INSNS (2), /* int zeroed load */ COSTS_N_INSNS (2), /* float load */ COSTS_N_INSNS (1), /* fmov, fneg, fabs */ COSTS_N_INSNS (4), /* fadd, fsub */ COSTS_N_INSNS (1), /* fcmp */ COSTS_N_INSNS (2), /* fmov, fmovr */ COSTS_N_INSNS (4), /* fmul */ COSTS_N_INSNS (13), /* fdivs */ COSTS_N_INSNS (23), /* fdivd */ COSTS_N_INSNS (13), /* fsqrts */ COSTS_N_INSNS (23), /* fsqrtd */ COSTS_N_INSNS (4), /* imul */ COSTS_N_INSNS (4), /* imulX */ 2, /* imul bit factor */ COSTS_N_INSNS (37), /* idiv */ COSTS_N_INSNS (68), /* idivX */ COSTS_N_INSNS (2), /* movcc/movr */ 2, /* shift penalty */ }; static const struct processor_costs ultrasparc3_costs = { COSTS_N_INSNS (2), /* int load */ COSTS_N_INSNS (3), /* int signed load */ COSTS_N_INSNS (3), /* int zeroed load */ COSTS_N_INSNS (2), /* float load */ COSTS_N_INSNS (3), /* fmov, fneg, fabs */ COSTS_N_INSNS (4), /* fadd, fsub */ COSTS_N_INSNS (5), /* fcmp */ COSTS_N_INSNS (3), /* fmov, fmovr */ COSTS_N_INSNS (4), /* fmul */ COSTS_N_INSNS (17), /* fdivs */ COSTS_N_INSNS (20), /* fdivd */ COSTS_N_INSNS (20), /* fsqrts */ COSTS_N_INSNS (29), /* fsqrtd */ COSTS_N_INSNS (6), /* imul */ COSTS_N_INSNS (6), /* imulX */ 0, /* imul bit factor */ COSTS_N_INSNS (40), /* idiv */ COSTS_N_INSNS (71), /* idivX */ COSTS_N_INSNS (2), /* movcc/movr */ 0, /* shift penalty */ }; const struct processor_costs *sparc_costs = &cypress_costs; #ifdef HAVE_AS_RELAX_OPTION /* If 'as' and 'ld' are relaxing tail call insns into branch always, use "or %o7,%g0,X; call Y; or X,%g0,%o7" always, so that it can be optimized. With sethi/jmp, neither 'as' nor 'ld' has an easy way how to find out if somebody does not branch between the sethi and jmp. */ #define LEAF_SIBCALL_SLOT_RESERVED_P 1 #else #define LEAF_SIBCALL_SLOT_RESERVED_P \ ((TARGET_ARCH64 && !TARGET_CM_MEDLOW) || flag_pic) #endif /* Global variables for machine-dependent things. */ /* Size of frame. Need to know this to emit return insns from leaf procedures. ACTUAL_FSIZE is set by sparc_compute_frame_size() which is called during the reload pass. This is important as the value is later used for scheduling (to see what can go in a delay slot). APPARENT_FSIZE is the size of the stack less the register save area and less the outgoing argument area. It is used when saving call preserved regs. */ static HOST_WIDE_INT apparent_fsize; static HOST_WIDE_INT actual_fsize; /* Number of live general or floating point registers needed to be saved (as 4-byte quantities). */ static int num_gfregs; /* The alias set for prologue/epilogue register save/restore. */ static GTY(()) int sparc_sr_alias_set; /* Save the operands last given to a compare for use when we generate a scc or bcc insn. */ rtx sparc_compare_op0, sparc_compare_op1; /* Vector to say how input registers are mapped to output registers. HARD_FRAME_POINTER_REGNUM cannot be remapped by this function to eliminate it. You must use -fomit-frame-pointer to get that. */ char leaf_reg_remap[] = { 0, 1, 2, 3, 4, 5, 6, 7, -1, -1, -1, -1, -1, -1, 14, -1, -1, -1, -1, -1, -1, -1, -1, -1, 8, 9, 10, 11, 12, 13, -1, 15, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 100}; /* Vector, indexed by hard register number, which contains 1 for a register that is allowable in a candidate for leaf function treatment. */ char sparc_leaf_regs[] = { 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1}; struct machine_function GTY(()) { /* Some local-dynamic TLS symbol name. */ const char *some_ld_name; }; /* Register we pretend to think the frame pointer is allocated to. Normally, this is %fp, but if we are in a leaf procedure, this is %sp+"something". We record "something" separately as it may be too big for reg+constant addressing. */ static rtx frame_base_reg; static HOST_WIDE_INT frame_base_offset; static void sparc_init_modes (void); static void scan_record_type (tree, int *, int *, int *); static int function_arg_slotno (const CUMULATIVE_ARGS *, enum machine_mode, tree, int, int, int *, int *); static int supersparc_adjust_cost (rtx, rtx, rtx, int); static int hypersparc_adjust_cost (rtx, rtx, rtx, int); static void sparc_output_addr_vec (rtx); static void sparc_output_addr_diff_vec (rtx); static void sparc_output_deferred_case_vectors (void); static rtx sparc_builtin_saveregs (void); static int epilogue_renumber (rtx *, int); static bool sparc_assemble_integer (rtx, unsigned int, int); static int set_extends (rtx); static void load_pic_register (void); static int save_or_restore_regs (int, int, rtx, int, int); static void emit_save_regs (void); static void emit_restore_regs (void); static void sparc_asm_function_prologue (FILE *, HOST_WIDE_INT); static void sparc_asm_function_epilogue (FILE *, HOST_WIDE_INT); #ifdef OBJECT_FORMAT_ELF static void sparc_elf_asm_named_section (const char *, unsigned int); #endif static int sparc_adjust_cost (rtx, rtx, rtx, int); static int sparc_issue_rate (void); static void sparc_sched_init (FILE *, int, int); static int sparc_use_sched_lookahead (void); static void emit_soft_tfmode_libcall (const char *, int, rtx *); static void emit_soft_tfmode_binop (enum rtx_code, rtx *); static void emit_soft_tfmode_unop (enum rtx_code, rtx *); static void emit_soft_tfmode_cvt (enum rtx_code, rtx *); static void emit_hard_tfmode_operation (enum rtx_code, rtx *); static bool sparc_function_ok_for_sibcall (tree, tree); static void sparc_init_libfuncs (void); static void sparc_output_mi_thunk (FILE *, tree, HOST_WIDE_INT, HOST_WIDE_INT, tree); static struct machine_function * sparc_init_machine_status (void); static bool sparc_cannot_force_const_mem (rtx); static rtx sparc_tls_get_addr (void); static rtx sparc_tls_got (void); static const char *get_some_local_dynamic_name (void); static int get_some_local_dynamic_name_1 (rtx *, void *); static bool sparc_rtx_costs (rtx, int, int, int *); static bool sparc_promote_prototypes (tree); static rtx sparc_struct_value_rtx (tree, int); static bool sparc_return_in_memory (tree, tree); static bool sparc_strict_argument_naming (CUMULATIVE_ARGS *); static tree sparc_gimplify_va_arg (tree, tree, tree *, tree *); static bool sparc_pass_by_reference (CUMULATIVE_ARGS *, enum machine_mode, tree, bool); #ifdef SUBTARGET_ATTRIBUTE_TABLE const struct attribute_spec sparc_attribute_table[]; #endif /* Option handling. */ /* Code model option as passed by user. */ const char *sparc_cmodel_string; /* Parsed value. */ enum cmodel sparc_cmodel; char sparc_hard_reg_printed[8]; struct sparc_cpu_select sparc_select[] = { /* switch name, tune arch */ { (char *)0, "default", 1, 1 }, { (char *)0, "-mcpu=", 1, 1 }, { (char *)0, "-mtune=", 1, 0 }, { 0, 0, 0, 0 } }; /* CPU type. This is set from TARGET_CPU_DEFAULT and -m{cpu,tune}=xxx. */ enum processor_type sparc_cpu; /* Initialize the GCC target structure. */ /* The sparc default is to use .half rather than .short for aligned HI objects. Use .word instead of .long on non-ELF systems. */ #undef TARGET_ASM_ALIGNED_HI_OP #define TARGET_ASM_ALIGNED_HI_OP "\t.half\t" #ifndef OBJECT_FORMAT_ELF #undef TARGET_ASM_ALIGNED_SI_OP #define TARGET_ASM_ALIGNED_SI_OP "\t.word\t" #endif #undef TARGET_ASM_UNALIGNED_HI_OP #define TARGET_ASM_UNALIGNED_HI_OP "\t.uahalf\t" #undef TARGET_ASM_UNALIGNED_SI_OP #define TARGET_ASM_UNALIGNED_SI_OP "\t.uaword\t" #undef TARGET_ASM_UNALIGNED_DI_OP #define TARGET_ASM_UNALIGNED_DI_OP "\t.uaxword\t" /* The target hook has to handle DI-mode values. */ #undef TARGET_ASM_INTEGER #define TARGET_ASM_INTEGER sparc_assemble_integer #undef TARGET_ASM_FUNCTION_PROLOGUE #define TARGET_ASM_FUNCTION_PROLOGUE sparc_asm_function_prologue #undef TARGET_ASM_FUNCTION_EPILOGUE #define TARGET_ASM_FUNCTION_EPILOGUE sparc_asm_function_epilogue #undef TARGET_SCHED_ADJUST_COST #define TARGET_SCHED_ADJUST_COST sparc_adjust_cost #undef TARGET_SCHED_ISSUE_RATE #define TARGET_SCHED_ISSUE_RATE sparc_issue_rate #undef TARGET_SCHED_INIT #define TARGET_SCHED_INIT sparc_sched_init #undef TARGET_SCHED_FIRST_CYCLE_MULTIPASS_DFA_LOOKAHEAD #define TARGET_SCHED_FIRST_CYCLE_MULTIPASS_DFA_LOOKAHEAD sparc_use_sched_lookahead #undef TARGET_FUNCTION_OK_FOR_SIBCALL #define TARGET_FUNCTION_OK_FOR_SIBCALL sparc_function_ok_for_sibcall #undef TARGET_INIT_LIBFUNCS #define TARGET_INIT_LIBFUNCS sparc_init_libfuncs #ifdef HAVE_AS_TLS #undef TARGET_HAVE_TLS #define TARGET_HAVE_TLS true #endif #undef TARGET_CANNOT_FORCE_CONST_MEM #define TARGET_CANNOT_FORCE_CONST_MEM sparc_cannot_force_const_mem #undef TARGET_ASM_OUTPUT_MI_THUNK #define TARGET_ASM_OUTPUT_MI_THUNK sparc_output_mi_thunk #undef TARGET_ASM_CAN_OUTPUT_MI_THUNK #define TARGET_ASM_CAN_OUTPUT_MI_THUNK default_can_output_mi_thunk_no_vcall #undef TARGET_RTX_COSTS #define TARGET_RTX_COSTS sparc_rtx_costs #undef TARGET_ADDRESS_COST #define TARGET_ADDRESS_COST hook_int_rtx_0 /* This is only needed for TARGET_ARCH64, but since PROMOTE_FUNCTION_MODE is a no-op for TARGET_ARCH32 this is ok. Otherwise we'd need to add a runtime test for this value. */ #undef TARGET_PROMOTE_FUNCTION_ARGS #define TARGET_PROMOTE_FUNCTION_ARGS hook_bool_tree_true /* This is only needed for TARGET_ARCH64, but since PROMOTE_FUNCTION_MODE is a no-op for TARGET_ARCH32 this is ok. Otherwise we'd need to add a runtime test for this value. */ #undef TARGET_PROMOTE_FUNCTION_RETURN #define TARGET_PROMOTE_FUNCTION_RETURN hook_bool_tree_true #undef TARGET_PROMOTE_PROTOTYPES #define TARGET_PROMOTE_PROTOTYPES sparc_promote_prototypes #undef TARGET_STRUCT_VALUE_RTX #define TARGET_STRUCT_VALUE_RTX sparc_struct_value_rtx #undef TARGET_RETURN_IN_MEMORY #define TARGET_RETURN_IN_MEMORY sparc_return_in_memory #undef TARGET_MUST_PASS_IN_STACK #define TARGET_MUST_PASS_IN_STACK must_pass_in_stack_var_size #undef TARGET_PASS_BY_REFERENCE #define TARGET_PASS_BY_REFERENCE sparc_pass_by_reference #undef TARGET_EXPAND_BUILTIN_SAVEREGS #define TARGET_EXPAND_BUILTIN_SAVEREGS sparc_builtin_saveregs #undef TARGET_STRICT_ARGUMENT_NAMING #define TARGET_STRICT_ARGUMENT_NAMING sparc_strict_argument_naming #undef TARGET_GIMPLIFY_VA_ARG_EXPR #define TARGET_GIMPLIFY_VA_ARG_EXPR sparc_gimplify_va_arg #undef TARGET_LATE_RTL_PROLOGUE_EPILOGUE #define TARGET_LATE_RTL_PROLOGUE_EPILOGUE true #ifdef SUBTARGET_INSERT_ATTRIBUTES #undef TARGET_INSERT_ATTRIBUTES #define TARGET_INSERT_ATTRIBUTES SUBTARGET_INSERT_ATTRIBUTES #endif #ifdef SUBTARGET_ATTRIBUTE_TABLE #undef TARGET_ATTRIBUTE_TABLE #define TARGET_ATTRIBUTE_TABLE sparc_attribute_table #endif struct gcc_target targetm = TARGET_INITIALIZER; /* Validate and override various options, and do some machine dependent initialization. */ void sparc_override_options (void) { static struct code_model { const char *const name; const int value; } const cmodels[] = { { "32", CM_32 }, { "medlow", CM_MEDLOW }, { "medmid", CM_MEDMID }, { "medany", CM_MEDANY }, { "embmedany", CM_EMBMEDANY }, { 0, 0 } }; const struct code_model *cmodel; /* Map TARGET_CPU_DEFAULT to value for -m{arch,tune}=. */ static struct cpu_default { const int cpu; const char *const name; } const cpu_default[] = { /* There must be one entry here for each TARGET_CPU value. */ { TARGET_CPU_sparc, "cypress" }, { TARGET_CPU_sparclet, "tsc701" }, { TARGET_CPU_sparclite, "f930" }, { TARGET_CPU_v8, "v8" }, { TARGET_CPU_hypersparc, "hypersparc" }, { TARGET_CPU_sparclite86x, "sparclite86x" }, { TARGET_CPU_supersparc, "supersparc" }, { TARGET_CPU_v9, "v9" }, { TARGET_CPU_ultrasparc, "ultrasparc" }, { TARGET_CPU_ultrasparc3, "ultrasparc3" }, { 0, 0 } }; const struct cpu_default *def; /* Table of values for -m{cpu,tune}=. */ static struct cpu_table { const char *const name; const enum processor_type processor; const int disable; const int enable; } const cpu_table[] = { { "v7", PROCESSOR_V7, MASK_ISA, 0 }, { "cypress", PROCESSOR_CYPRESS, MASK_ISA, 0 }, { "v8", PROCESSOR_V8, MASK_ISA, MASK_V8 }, /* TI TMS390Z55 supersparc */ { "supersparc", PROCESSOR_SUPERSPARC, MASK_ISA, MASK_V8 }, { "sparclite", PROCESSOR_SPARCLITE, MASK_ISA, MASK_SPARCLITE }, /* The Fujitsu MB86930 is the original sparclite chip, with no fpu. The Fujitsu MB86934 is the recent sparclite chip, with an fpu. */ { "f930", PROCESSOR_F930, MASK_ISA|MASK_FPU, MASK_SPARCLITE }, { "f934", PROCESSOR_F934, MASK_ISA, MASK_SPARCLITE|MASK_FPU }, { "hypersparc", PROCESSOR_HYPERSPARC, MASK_ISA, MASK_V8|MASK_FPU }, { "sparclite86x", PROCESSOR_SPARCLITE86X, MASK_ISA|MASK_FPU, MASK_SPARCLITE }, { "sparclet", PROCESSOR_SPARCLET, MASK_ISA, MASK_SPARCLET }, /* TEMIC sparclet */ { "tsc701", PROCESSOR_TSC701, MASK_ISA, MASK_SPARCLET }, { "v9", PROCESSOR_V9, MASK_ISA, MASK_V9 }, /* TI ultrasparc I, II, IIi */ { "ultrasparc", PROCESSOR_ULTRASPARC, MASK_ISA, MASK_V9 /* Although insns using %y are deprecated, it is a clear win on current ultrasparcs. */ |MASK_DEPRECATED_V8_INSNS}, /* TI ultrasparc III */ /* ??? Check if %y issue still holds true in ultra3. */ { "ultrasparc3", PROCESSOR_ULTRASPARC3, MASK_ISA, MASK_V9|MASK_DEPRECATED_V8_INSNS}, { 0, 0, 0, 0 } }; const struct cpu_table *cpu; const struct sparc_cpu_select *sel; int fpu; #ifndef SPARC_BI_ARCH /* Check for unsupported architecture size. */ if (! TARGET_64BIT != DEFAULT_ARCH32_P) error ("%s is not supported by this configuration", DEFAULT_ARCH32_P ? "-m64" : "-m32"); #endif /* We force all 64bit archs to use 128 bit long double */ if (TARGET_64BIT && ! TARGET_LONG_DOUBLE_128) { error ("-mlong-double-64 not allowed with -m64"); target_flags |= MASK_LONG_DOUBLE_128; } /* Code model selection. */ sparc_cmodel = SPARC_DEFAULT_CMODEL; #ifdef SPARC_BI_ARCH if (TARGET_ARCH32) sparc_cmodel = CM_32; #endif if (sparc_cmodel_string != NULL) { if (TARGET_ARCH64) { for (cmodel = &cmodels[0]; cmodel->name; cmodel++) if (strcmp (sparc_cmodel_string, cmodel->name) == 0) break; if (cmodel->name == NULL) error ("bad value (%s) for -mcmodel= switch", sparc_cmodel_string); else sparc_cmodel = cmodel->value; } else error ("-mcmodel= is not supported on 32 bit systems"); } fpu = TARGET_FPU; /* save current -mfpu status */ /* Set the default CPU. */ for (def = &cpu_default[0]; def->name; ++def) if (def->cpu == TARGET_CPU_DEFAULT) break; if (! def->name) abort (); sparc_select[0].string = def->name; for (sel = &sparc_select[0]; sel->name; ++sel) { if (sel->string) { for (cpu = &cpu_table[0]; cpu->name; ++cpu) if (! strcmp (sel->string, cpu->name)) { if (sel->set_tune_p) sparc_cpu = cpu->processor; if (sel->set_arch_p) { target_flags &= ~cpu->disable; target_flags |= cpu->enable; } break; } if (! cpu->name) error ("bad value (%s) for %s switch", sel->string, sel->name); } } /* If -mfpu or -mno-fpu was explicitly used, don't override with the processor default. Clear MASK_FPU_SET to avoid confusing the reverse mapping from switch values to names. */ if (TARGET_FPU_SET) { target_flags = (target_flags & ~MASK_FPU) | fpu; target_flags &= ~MASK_FPU_SET; } /* Don't allow -mvis if FPU is disabled. */ if (! TARGET_FPU) target_flags &= ~MASK_VIS; /* -mvis assumes UltraSPARC+, so we are sure v9 instructions are available. -m64 also implies v9. */ if (TARGET_VIS || TARGET_ARCH64) { target_flags |= MASK_V9; target_flags &= ~(MASK_V8 | MASK_SPARCLET | MASK_SPARCLITE); } /* Use the deprecated v8 insns for sparc64 in 32 bit mode. */ if (TARGET_V9 && TARGET_ARCH32) target_flags |= MASK_DEPRECATED_V8_INSNS; /* V8PLUS requires V9, makes no sense in 64 bit mode. */ if (! TARGET_V9 || TARGET_ARCH64) target_flags &= ~MASK_V8PLUS; /* Don't use stack biasing in 32 bit mode. */ if (TARGET_ARCH32) target_flags &= ~MASK_STACK_BIAS; /* Supply a default value for align_functions. */ if (align_functions == 0 && (sparc_cpu == PROCESSOR_ULTRASPARC || sparc_cpu == PROCESSOR_ULTRASPARC3)) align_functions = 32; /* Validate PCC_STRUCT_RETURN. */ if (flag_pcc_struct_return == DEFAULT_PCC_STRUCT_RETURN) flag_pcc_struct_return = (TARGET_ARCH64 ? 0 : 1); /* Only use .uaxword when compiling for a 64-bit target. */ if (!TARGET_ARCH64) targetm.asm_out.unaligned_op.di = NULL; /* Do various machine dependent initializations. */ sparc_init_modes (); /* Acquire a unique set number for our register saves and restores. */ sparc_sr_alias_set = new_alias_set (); /* Set up function hooks. */ init_machine_status = sparc_init_machine_status; switch (sparc_cpu) { case PROCESSOR_V7: case PROCESSOR_CYPRESS: sparc_costs = &cypress_costs; break; case PROCESSOR_V8: case PROCESSOR_SPARCLITE: case PROCESSOR_SUPERSPARC: sparc_costs = &supersparc_costs; break; case PROCESSOR_F930: case PROCESSOR_F934: case PROCESSOR_HYPERSPARC: case PROCESSOR_SPARCLITE86X: sparc_costs = &hypersparc_costs; break; case PROCESSOR_SPARCLET: case PROCESSOR_TSC701: sparc_costs = &sparclet_costs; break; case PROCESSOR_V9: case PROCESSOR_ULTRASPARC: sparc_costs = &ultrasparc_costs; break; case PROCESSOR_ULTRASPARC3: sparc_costs = &ultrasparc3_costs; break; }; } #ifdef SUBTARGET_ATTRIBUTE_TABLE /* Table of valid machine attributes. */ const struct attribute_spec sparc_attribute_table[] = { /* { name, min_len, max_len, decl_req, type_req, fn_type_req, handler } */ SUBTARGET_ATTRIBUTE_TABLE, { NULL, 0, 0, false, false, false, NULL } }; #endif /* Miscellaneous utilities. */ /* Nonzero if CODE, a comparison, is suitable for use in v9 conditional move or branch on register contents instructions. */ int v9_regcmp_p (enum rtx_code code) { return (code == EQ || code == NE || code == GE || code == LT || code == LE || code == GT); } /* Operand constraints. */ /* Return nonzero only if OP is a register of mode MODE, or const0_rtx. */ int reg_or_0_operand (rtx op, enum machine_mode mode) { if (register_operand (op, mode)) return 1; if (op == const0_rtx) return 1; if (GET_MODE (op) == VOIDmode && GET_CODE (op) == CONST_DOUBLE && CONST_DOUBLE_HIGH (op) == 0 && CONST_DOUBLE_LOW (op) == 0) return 1; if (fp_zero_operand (op, mode)) return 1; return 0; } /* Return nonzero only if OP is const1_rtx. */ int const1_operand (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED) { return op == const1_rtx; } /* Nonzero if OP is a floating point value with value 0.0. */ int fp_zero_operand (rtx op, enum machine_mode mode) { if (GET_MODE_CLASS (GET_MODE (op)) != MODE_FLOAT) return 0; return op == CONST0_RTX (mode); } /* Nonzero if OP is a register operand in floating point register. */ int fp_register_operand (rtx op, enum machine_mode mode) { if (! register_operand (op, mode)) return 0; if (GET_CODE (op) == SUBREG) op = SUBREG_REG (op); return GET_CODE (op) == REG && SPARC_FP_REG_P (REGNO (op)); } /* Nonzero if OP is a floating point constant which can be loaded into an integer register using a single sethi instruction. */ int fp_sethi_p (rtx op) { if (GET_CODE (op) == CONST_DOUBLE) { REAL_VALUE_TYPE r; long i; REAL_VALUE_FROM_CONST_DOUBLE (r, op); if (REAL_VALUES_EQUAL (r, dconst0) && ! REAL_VALUE_MINUS_ZERO (r)) return 0; REAL_VALUE_TO_TARGET_SINGLE (r, i); if (SPARC_SETHI_P (i)) return 1; } return 0; } /* Nonzero if OP is a floating point constant which can be loaded into an integer register using a single mov instruction. */ int fp_mov_p (rtx op) { if (GET_CODE (op) == CONST_DOUBLE) { REAL_VALUE_TYPE r; long i; REAL_VALUE_FROM_CONST_DOUBLE (r, op); if (REAL_VALUES_EQUAL (r, dconst0) && ! REAL_VALUE_MINUS_ZERO (r)) return 0; REAL_VALUE_TO_TARGET_SINGLE (r, i); if (SPARC_SIMM13_P (i)) return 1; } return 0; } /* Nonzero if OP is a floating point constant which can be loaded into an integer register using a high/losum instruction sequence. */ int fp_high_losum_p (rtx op) { /* The constraints calling this should only be in SFmode move insns, so any constant which cannot be moved using a single insn will do. */ if (GET_CODE (op) == CONST_DOUBLE) { REAL_VALUE_TYPE r; long i; REAL_VALUE_FROM_CONST_DOUBLE (r, op); if (REAL_VALUES_EQUAL (r, dconst0) && ! REAL_VALUE_MINUS_ZERO (r)) return 0; REAL_VALUE_TO_TARGET_SINGLE (r, i); if (! SPARC_SETHI_P (i) && ! SPARC_SIMM13_P (i)) return 1; } return 0; } /* Nonzero if OP is an integer register. */ int intreg_operand (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED) { return (register_operand (op, SImode) || (TARGET_ARCH64 && register_operand (op, DImode))); } /* Nonzero if OP is a floating point condition code register. */ int fcc_reg_operand (rtx op, enum machine_mode mode) { /* This can happen when recog is called from combine. Op may be a MEM. Fail instead of calling abort in this case. */ if (GET_CODE (op) != REG) return 0; if (mode != VOIDmode && mode != GET_MODE (op)) return 0; if (mode == VOIDmode && (GET_MODE (op) != CCFPmode && GET_MODE (op) != CCFPEmode)) return 0; #if 0 /* ??? ==> 1 when %fcc0-3 are pseudos first. See gen_compare_reg(). */ if (reg_renumber == 0) return REGNO (op) >= FIRST_PSEUDO_REGISTER; return REGNO_OK_FOR_CCFP_P (REGNO (op)); #else return (unsigned) REGNO (op) - SPARC_FIRST_V9_FCC_REG < 4; #endif } /* Nonzero if OP is a floating point condition code fcc0 register. */ int fcc0_reg_operand (rtx op, enum machine_mode mode) { /* This can happen when recog is called from combine. Op may be a MEM. Fail instead of calling abort in this case. */ if (GET_CODE (op) != REG) return 0; if (mode != VOIDmode && mode != GET_MODE (op)) return 0; if (mode == VOIDmode && (GET_MODE (op) != CCFPmode && GET_MODE (op) != CCFPEmode)) return 0; return REGNO (op) == SPARC_FCC_REG; } /* Nonzero if OP is an integer or floating point condition code register. */ int icc_or_fcc_reg_operand (rtx op, enum machine_mode mode) { if (GET_CODE (op) == REG && REGNO (op) == SPARC_ICC_REG) { if (mode != VOIDmode && mode != GET_MODE (op)) return 0; if (mode == VOIDmode && GET_MODE (op) != CCmode && GET_MODE (op) != CCXmode) return 0; return 1; } return fcc_reg_operand (op, mode); } /* Call insn on SPARC can take a PC-relative constant address, or any regular memory address. */ int call_operand (rtx op, enum machine_mode mode) { if (GET_CODE (op) != MEM) abort (); op = XEXP (op, 0); return (symbolic_operand (op, mode) || memory_address_p (Pmode, op)); } int call_operand_address (rtx op, enum machine_mode mode) { return (symbolic_operand (op, mode) || memory_address_p (Pmode, op)); } /* If OP is a SYMBOL_REF of a thread-local symbol, return its TLS mode, otherwise return 0. */ int tls_symbolic_operand (rtx op) { if (GET_CODE (op) != SYMBOL_REF) return 0; return SYMBOL_REF_TLS_MODEL (op); } int tgd_symbolic_operand (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED) { return tls_symbolic_operand (op) == TLS_MODEL_GLOBAL_DYNAMIC; } int tld_symbolic_operand (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED) { return tls_symbolic_operand (op) == TLS_MODEL_LOCAL_DYNAMIC; } int tie_symbolic_operand (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED) { return tls_symbolic_operand (op) == TLS_MODEL_INITIAL_EXEC; } int tle_symbolic_operand (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED) { return tls_symbolic_operand (op) == TLS_MODEL_LOCAL_EXEC; } /* Returns 1 if OP is either a symbol reference or a sum of a symbol reference and a constant. */ int symbolic_operand (register rtx op, enum machine_mode mode) { enum machine_mode omode = GET_MODE (op); if (omode != mode && omode != VOIDmode && mode != VOIDmode) return 0; switch (GET_CODE (op)) { case SYMBOL_REF: return !SYMBOL_REF_TLS_MODEL (op); case LABEL_REF: return 1; case CONST: op = XEXP (op, 0); return (((GET_CODE (XEXP (op, 0)) == SYMBOL_REF && !SYMBOL_REF_TLS_MODEL (XEXP (op, 0))) || GET_CODE (XEXP (op, 0)) == LABEL_REF) && GET_CODE (XEXP (op, 1)) == CONST_INT); default: return 0; } } /* Return truth value of statement that OP is a symbolic memory operand of mode MODE. */ int symbolic_memory_operand (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED) { if (GET_CODE (op) == SUBREG) op = SUBREG_REG (op); if (GET_CODE (op) != MEM) return 0; op = XEXP (op, 0); return ((GET_CODE (op) == SYMBOL_REF && !SYMBOL_REF_TLS_MODEL (op)) || GET_CODE (op) == CONST || GET_CODE (op) == HIGH || GET_CODE (op) == LABEL_REF); } /* Return truth value of statement that OP is a LABEL_REF of mode MODE. */ int label_ref_operand (rtx op, enum machine_mode mode) { if (GET_CODE (op) != LABEL_REF) return 0; if (GET_MODE (op) != mode) return 0; return 1; } /* Return 1 if the operand is an argument used in generating pic references in either the medium/low or medium/anywhere code models of sparc64. */ int sp64_medium_pic_operand (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED) { /* Check for (const (minus (symbol_ref:GOT) (const (minus (label) (pc))))). */ if (GET_CODE (op) != CONST) return 0; op = XEXP (op, 0); if (GET_CODE (op) != MINUS) return 0; if (GET_CODE (XEXP (op, 0)) != SYMBOL_REF) return 0; /* ??? Ensure symbol is GOT. */ if (GET_CODE (XEXP (op, 1)) != CONST) return 0; if (GET_CODE (XEXP (XEXP (op, 1), 0)) != MINUS) return 0; return 1; } /* Return 1 if the operand is a data segment reference. This includes the readonly data segment, or in other words anything but the text segment. This is needed in the medium/anywhere code model on v9. These values are accessed with EMBMEDANY_BASE_REG. */ int data_segment_operand (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED) { switch (GET_CODE (op)) { case SYMBOL_REF : return ! SYMBOL_REF_FUNCTION_P (op); case PLUS : /* Assume canonical format of symbol + constant. Fall through. */ case CONST : return data_segment_operand (XEXP (op, 0), VOIDmode); default : return 0; } } /* Return 1 if the operand is a text segment reference. This is needed in the medium/anywhere code model on v9. */ int text_segment_operand (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED) { switch (GET_CODE (op)) { case LABEL_REF : return 1; case SYMBOL_REF : return SYMBOL_REF_FUNCTION_P (op); case PLUS : /* Assume canonical format of symbol + constant. Fall through. */ case CONST : return text_segment_operand (XEXP (op, 0), VOIDmode); default : return 0; } } /* Return 1 if the operand is either a register or a memory operand that is not symbolic. */ int reg_or_nonsymb_mem_operand (register rtx op, enum machine_mode mode) { if (register_operand (op, mode)) return 1; if (memory_operand (op, mode) && ! symbolic_memory_operand (op, mode)) return 1; return 0; } int splittable_symbolic_memory_operand (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED) { if (GET_CODE (op) != MEM) return 0; if (! symbolic_operand (XEXP (op, 0), Pmode)) return 0; return 1; } int splittable_immediate_memory_operand (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED) { if (GET_CODE (op) != MEM) return 0; if (! immediate_operand (XEXP (op, 0), Pmode)) return 0; return 1; } /* Return truth value of whether OP is EQ or NE. */ int eq_or_neq (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED) { return (GET_CODE (op) == EQ || GET_CODE (op) == NE); } /* Return 1 if this is a comparison operator, but not an EQ, NE, GEU, or LTU for non-floating-point. We handle those specially. */ int normal_comp_operator (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED) { enum rtx_code code; if (!COMPARISON_P (op)) return 0; if (GET_MODE (XEXP (op, 0)) == CCFPmode || GET_MODE (XEXP (op, 0)) == CCFPEmode) return 1; code = GET_CODE (op); return (code != NE && code != EQ && code != GEU && code != LTU); } /* Return 1 if this is a comparison operator. This allows the use of MATCH_OPERATOR to recognize all the branch insns. */ int noov_compare_op (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED) { enum rtx_code code; if (!COMPARISON_P (op)) return 0; code = GET_CODE (op); if (GET_MODE (XEXP (op, 0)) == CC_NOOVmode || GET_MODE (XEXP (op, 0)) == CCX_NOOVmode) /* These are the only branches which work with CC_NOOVmode. */ return (code == EQ || code == NE || code == GE || code == LT); return 1; } /* Return 1 if this is a 64-bit comparison operator. This allows the use of MATCH_OPERATOR to recognize all the branch insns. */ int noov_compare64_op (register rtx op, enum machine_mode mode ATTRIBUTE_UNUSED) { enum rtx_code code; if (! TARGET_V9) return 0; if (!COMPARISON_P (op)) return 0; code = GET_CODE (op); if (GET_MODE (XEXP (op, 0)) == CCX_NOOVmode) /* These are the only branches which work with CCX_NOOVmode. */ return (code == EQ || code == NE || code == GE || code == LT); return (GET_MODE (XEXP (op, 0)) == CCXmode); } /* Nonzero if OP is a comparison operator suitable for use in v9 conditional move or branch on register contents instructions. */ int v9_regcmp_op (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED) { enum rtx_code code; if (!COMPARISON_P (op)) return 0; code = GET_CODE (op); return v9_regcmp_p (code); } /* Return 1 if this is a SIGN_EXTEND or ZERO_EXTEND operation. */ int extend_op (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED) { return GET_CODE (op) == SIGN_EXTEND || GET_CODE (op) == ZERO_EXTEND; } /* Return nonzero if OP is an operator of mode MODE which can set the condition codes explicitly. We do not include PLUS and MINUS because these require CC_NOOVmode, which we handle explicitly. */ int cc_arithop (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED) { if (GET_CODE (op) == AND || GET_CODE (op) == IOR || GET_CODE (op) == XOR) return 1; return 0; } /* Return nonzero if OP is an operator of mode MODE which can bitwise complement its second operand and set the condition codes explicitly. */ int cc_arithopn (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED) { /* XOR is not here because combine canonicalizes (xor (not ...) ...) and (xor ... (not ...)) to (not (xor ...)). */ return (GET_CODE (op) == AND || GET_CODE (op) == IOR); } /* Return true if OP is a register, or is a CONST_INT that can fit in a signed 13 bit immediate field. This is an acceptable SImode operand for most 3 address instructions. */ int arith_operand (rtx op, enum machine_mode mode) { if (register_operand (op, mode)) return 1; if (GET_CODE (op) != CONST_INT) return 0; return SMALL_INT32 (op); } /* Return true if OP is a constant 4096 */ int arith_4096_operand (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED) { if (GET_CODE (op) != CONST_INT) return 0; else return INTVAL (op) == 4096; } /* Return true if OP is suitable as second operand for add/sub */ int arith_add_operand (rtx op, enum machine_mode mode) { return arith_operand (op, mode) || arith_4096_operand (op, mode); } /* Return true if OP is a CONST_INT or a CONST_DOUBLE which can fit in the immediate field of OR and XOR instructions. Used for 64-bit constant formation patterns. */ int const64_operand (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED) { return ((GET_CODE (op) == CONST_INT && SPARC_SIMM13_P (INTVAL (op))) #if HOST_BITS_PER_WIDE_INT != 64 || (GET_CODE (op) == CONST_DOUBLE && SPARC_SIMM13_P (CONST_DOUBLE_LOW (op)) && (CONST_DOUBLE_HIGH (op) == ((CONST_DOUBLE_LOW (op) & 0x80000000) != 0 ? (HOST_WIDE_INT)-1 : 0))) #endif ); } /* The same, but only for sethi instructions. */ int const64_high_operand (rtx op, enum machine_mode mode) { return ((GET_CODE (op) == CONST_INT && (INTVAL (op) & ~(HOST_WIDE_INT)0x3ff) != 0 && SPARC_SETHI_P (INTVAL (op) & GET_MODE_MASK (mode)) ) || (GET_CODE (op) == CONST_DOUBLE && CONST_DOUBLE_HIGH (op) == 0 && (CONST_DOUBLE_LOW (op) & ~(HOST_WIDE_INT)0x3ff) != 0 && SPARC_SETHI_P (CONST_DOUBLE_LOW (op)))); } /* Return true if OP is a register, or is a CONST_INT that can fit in a signed 11 bit immediate field. This is an acceptable SImode operand for the movcc instructions. */ int arith11_operand (rtx op, enum machine_mode mode) { return (register_operand (op, mode) || (GET_CODE (op) == CONST_INT && SPARC_SIMM11_P (INTVAL (op)))); } /* Return true if OP is a register, or is a CONST_INT that can fit in a signed 10 bit immediate field. This is an acceptable SImode operand for the movrcc instructions. */ int arith10_operand (rtx op, enum machine_mode mode) { return (register_operand (op, mode) || (GET_CODE (op) == CONST_INT && SPARC_SIMM10_P (INTVAL (op)))); } /* Return true if OP is a register, is a CONST_INT that fits in a 13 bit immediate field, or is a CONST_DOUBLE whose both parts fit in a 13 bit immediate field. ARCH64: Return true if OP is a register, or is a CONST_INT or CONST_DOUBLE that can fit in a 13 bit immediate field. This is an acceptable DImode operand for most 3 address instructions. */ int arith_double_operand (rtx op, enum machine_mode mode) { return (register_operand (op, mode) || (GET_CODE (op) == CONST_INT && SMALL_INT (op)) || (! TARGET_ARCH64 && GET_CODE (op) == CONST_DOUBLE && (unsigned HOST_WIDE_INT) (CONST_DOUBLE_LOW (op) + 0x1000) < 0x2000 && (unsigned HOST_WIDE_INT) (CONST_DOUBLE_HIGH (op) + 0x1000) < 0x2000) || (TARGET_ARCH64 && GET_CODE (op) == CONST_DOUBLE && (unsigned HOST_WIDE_INT) (CONST_DOUBLE_LOW (op) + 0x1000) < 0x2000 && ((CONST_DOUBLE_HIGH (op) == -1 && (CONST_DOUBLE_LOW (op) & 0x1000) == 0x1000) || (CONST_DOUBLE_HIGH (op) == 0 && (CONST_DOUBLE_LOW (op) & 0x1000) == 0)))); } /* Return true if OP is a constant 4096 for DImode on ARCH64 */ int arith_double_4096_operand (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED) { return (TARGET_ARCH64 && ((GET_CODE (op) == CONST_INT && INTVAL (op) == 4096) || (GET_CODE (op) == CONST_DOUBLE && CONST_DOUBLE_LOW (op) == 4096 && CONST_DOUBLE_HIGH (op) == 0))); } /* Return true if OP is suitable as second operand for add/sub in DImode */ int arith_double_add_operand (rtx op, enum machine_mode mode) { return arith_double_operand (op, mode) || arith_double_4096_operand (op, mode); } /* Return true if OP is a register, or is a CONST_INT or CONST_DOUBLE that can fit in an 11 bit immediate field. This is an acceptable DImode operand for the movcc instructions. */ /* ??? Replace with arith11_operand? */ int arith11_double_operand (rtx op, enum machine_mode mode) { return (register_operand (op, mode) || (GET_CODE (op) == CONST_DOUBLE && (GET_MODE (op) == mode || GET_MODE (op) == VOIDmode) && (unsigned HOST_WIDE_INT) (CONST_DOUBLE_LOW (op) + 0x400) < 0x800 && ((CONST_DOUBLE_HIGH (op) == -1 && (CONST_DOUBLE_LOW (op) & 0x400) == 0x400) || (CONST_DOUBLE_HIGH (op) == 0 && (CONST_DOUBLE_LOW (op) & 0x400) == 0))) || (GET_CODE (op) == CONST_INT && (GET_MODE (op) == mode || GET_MODE (op) == VOIDmode) && (unsigned HOST_WIDE_INT) (INTVAL (op) + 0x400) < 0x800)); } /* Return true if OP is a register, or is a CONST_INT or CONST_DOUBLE that can fit in an 10 bit immediate field. This is an acceptable DImode operand for the movrcc instructions. */ /* ??? Replace with arith10_operand? */ int arith10_double_operand (rtx op, enum machine_mode mode) { return (register_operand (op, mode) || (GET_CODE (op) == CONST_DOUBLE && (GET_MODE (op) == mode || GET_MODE (op) == VOIDmode) && (unsigned) (CONST_DOUBLE_LOW (op) + 0x200) < 0x400 && ((CONST_DOUBLE_HIGH (op) == -1 && (CONST_DOUBLE_LOW (op) & 0x200) == 0x200) || (CONST_DOUBLE_HIGH (op) == 0 && (CONST_DOUBLE_LOW (op) & 0x200) == 0))) || (GET_CODE (op) == CONST_INT && (GET_MODE (op) == mode || GET_MODE (op) == VOIDmode) && (unsigned HOST_WIDE_INT) (INTVAL (op) + 0x200) < 0x400)); } /* Return truth value of whether OP is an integer which fits the range constraining immediate operands in most three-address insns, which have a 13 bit immediate field. */ int small_int (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED) { return (GET_CODE (op) == CONST_INT && SMALL_INT (op)); } int small_int_or_double (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED) { return ((GET_CODE (op) == CONST_INT && SMALL_INT (op)) || (GET_CODE (op) == CONST_DOUBLE && CONST_DOUBLE_HIGH (op) == 0 && SPARC_SIMM13_P (CONST_DOUBLE_LOW (op)))); } /* Recognize operand values for the umul instruction. That instruction sign extends immediate values just like all other sparc instructions, but interprets the extended result as an unsigned number. */ int uns_small_int (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED) { #if HOST_BITS_PER_WIDE_INT > 32 /* All allowed constants will fit a CONST_INT. */ return (GET_CODE (op) == CONST_INT && ((INTVAL (op) >= 0 && INTVAL (op) < 0x1000) || (INTVAL (op) >= 0xFFFFF000 && INTVAL (op) <= 0xFFFFFFFF))); #else return ((GET_CODE (op) == CONST_INT && (unsigned) INTVAL (op) < 0x1000) || (GET_CODE (op) == CONST_DOUBLE && CONST_DOUBLE_HIGH (op) == 0 && (unsigned) CONST_DOUBLE_LOW (op) - 0xFFFFF000 < 0x1000)); #endif } int uns_arith_operand (rtx op, enum machine_mode mode) { return register_operand (op, mode) || uns_small_int (op, mode); } /* Return truth value of statement that OP is a call-clobbered register. */ int clobbered_register (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED) { return (GET_CODE (op) == REG && call_used_regs[REGNO (op)]); } /* Return 1 if OP is a valid operand for the source of a move insn. */ int input_operand (rtx op, enum machine_mode mode) { /* If both modes are non-void they must be the same. */ if (mode != VOIDmode && GET_MODE (op) != VOIDmode && mode != GET_MODE (op)) return 0; /* Allow any one instruction integer constant, and all CONST_INT variants when we are working in DImode and !arch64. */ if (GET_MODE_CLASS (mode) == MODE_INT && ((GET_CODE (op) == CONST_INT && (SPARC_SETHI_P (INTVAL (op) & GET_MODE_MASK (mode)) || SPARC_SIMM13_P (INTVAL (op)) || (mode == DImode && ! TARGET_ARCH64))) || (TARGET_ARCH64 && GET_CODE (op) == CONST_DOUBLE && ((CONST_DOUBLE_HIGH (op) == 0 && SPARC_SETHI_P (CONST_DOUBLE_LOW (op))) || #if HOST_BITS_PER_WIDE_INT == 64 (CONST_DOUBLE_HIGH (op) == 0 && SPARC_SIMM13_P (CONST_DOUBLE_LOW (op))) #else (SPARC_SIMM13_P (CONST_DOUBLE_LOW (op)) && (((CONST_DOUBLE_LOW (op) & 0x80000000) == 0 && CONST_DOUBLE_HIGH (op) == 0) || (CONST_DOUBLE_HIGH (op) == -1 && CONST_DOUBLE_LOW (op) & 0x80000000) != 0)) #endif )))) return 1; /* If !arch64 and this is a DImode const, allow it so that the splits can be generated. */ if (! TARGET_ARCH64 && mode == DImode && GET_CODE (op) == CONST_DOUBLE) return 1; if (register_operand (op, mode)) return 1; if (GET_MODE_CLASS (mode) == MODE_FLOAT && GET_CODE (op) == CONST_DOUBLE) return 1; /* If this is a SUBREG, look inside so that we handle paradoxical ones. */ if (GET_CODE (op) == SUBREG) op = SUBREG_REG (op); /* Check for valid MEM forms. */ if (GET_CODE (op) == MEM) { rtx inside = XEXP (op, 0); if (GET_CODE (inside) == LO_SUM) { /* We can't allow these because all of the splits (eventually as they trickle down into DFmode splits) require offsettable memory references. */ if (! TARGET_V9 && GET_MODE (op) == TFmode) return 0; return (register_operand (XEXP (inside, 0), Pmode) && CONSTANT_P (XEXP (inside, 1))); } return memory_address_p (mode, inside); } return 0; } /* Return 1 if OP is valid for the lhs of a compare insn. */ int compare_operand (rtx op, enum machine_mode mode) { if (GET_CODE (op) == ZERO_EXTRACT) return (register_operand (XEXP (op, 0), mode) && small_int_or_double (XEXP (op, 1), mode) && small_int_or_double (XEXP (op, 2), mode) /* This matches cmp_zero_extract. */ && ((mode == SImode && ((GET_CODE (XEXP (op, 2)) == CONST_INT && INTVAL (XEXP (op, 2)) > 19) || (GET_CODE (XEXP (op, 2)) == CONST_DOUBLE && CONST_DOUBLE_LOW (XEXP (op, 2)) > 19))) /* This matches cmp_zero_extract_sp64. */ || (mode == DImode && TARGET_ARCH64 && ((GET_CODE (XEXP (op, 2)) == CONST_INT && INTVAL (XEXP (op, 2)) > 51) || (GET_CODE (XEXP (op, 2)) == CONST_DOUBLE && CONST_DOUBLE_LOW (XEXP (op, 2)) > 51))))); else return register_operand (op, mode); } /* We know it can't be done in one insn when we get here, the movsi expander guarantees this. */ void sparc_emit_set_const32 (rtx op0, rtx op1) { enum machine_mode mode = GET_MODE (op0); rtx temp; if (GET_CODE (op1) == CONST_INT) { HOST_WIDE_INT value = INTVAL (op1); if (SPARC_SETHI_P (value & GET_MODE_MASK (mode)) || SPARC_SIMM13_P (value)) abort (); } /* Full 2-insn decomposition is needed. */ if (reload_in_progress || reload_completed) temp = op0; else temp = gen_reg_rtx (mode); if (GET_CODE (op1) == CONST_INT) { /* Emit them as real moves instead of a HIGH/LO_SUM, this way CSE can see everything and reuse intermediate values if it wants. */ if (TARGET_ARCH64 && HOST_BITS_PER_WIDE_INT != 64 && (INTVAL (op1) & 0x80000000) != 0) emit_insn (gen_rtx_SET (VOIDmode, temp, immed_double_const (INTVAL (op1) & ~(HOST_WIDE_INT)0x3ff, 0, DImode))); else emit_insn (gen_rtx_SET (VOIDmode, temp, GEN_INT (INTVAL (op1) & ~(HOST_WIDE_INT)0x3ff))); emit_insn (gen_rtx_SET (VOIDmode, op0, gen_rtx_IOR (mode, temp, GEN_INT (INTVAL (op1) & 0x3ff)))); } else { /* A symbol, emit in the traditional way. */ emit_insn (gen_rtx_SET (VOIDmode, temp, gen_rtx_HIGH (mode, op1))); emit_insn (gen_rtx_SET (VOIDmode, op0, gen_rtx_LO_SUM (mode, temp, op1))); } } /* Load OP1, a symbolic 64-bit constant, into OP0, a DImode register. If TEMP is non-zero, we are forbidden to use any other scratch registers. Otherwise, we are allowed to generate them as needed. Note that TEMP may have TImode if the code model is TARGET_CM_MEDANY or TARGET_CM_EMBMEDANY (see the reload_indi and reload_outdi patterns). */ void sparc_emit_set_symbolic_const64 (rtx op0, rtx op1, rtx temp) { rtx temp1, temp2, temp3, temp4, temp5; rtx ti_temp = 0; if (temp && GET_MODE (temp) == TImode) { ti_temp = temp; temp = gen_rtx_REG (DImode, REGNO (temp)); } /* SPARC-V9 code-model support. */ switch (sparc_cmodel) { case CM_MEDLOW: /* The range spanned by all instructions in the object is less than 2^31 bytes (2GB) and the distance from any instruction to the location of the label _GLOBAL_OFFSET_TABLE_ is less than 2^31 bytes (2GB). The executable must be in the low 4TB of the virtual address space. sethi %hi(symbol), %temp1 or %temp1, %lo(symbol), %reg */ if (temp) temp1 = temp; /* op0 is allowed. */ else temp1 = gen_reg_rtx (DImode); emit_insn (gen_rtx_SET (VOIDmode, temp1, gen_rtx_HIGH (DImode, op1))); emit_insn (gen_rtx_SET (VOIDmode, op0, gen_rtx_LO_SUM (DImode, temp1, op1))); break; case CM_MEDMID: /* The range spanned by all instructions in the object is less than 2^31 bytes (2GB) and the distance from any instruction to the location of the label _GLOBAL_OFFSET_TABLE_ is less than 2^31 bytes (2GB). The executable must be in the low 16TB of the virtual address space. sethi %h44(symbol), %temp1 or %temp1, %m44(symbol), %temp2 sllx %temp2, 12, %temp3 or %temp3, %l44(symbol), %reg */ if (temp) { temp1 = op0; temp2 = op0; temp3 = temp; /* op0 is allowed. */ } else { temp1 = gen_reg_rtx (DImode); temp2 = gen_reg_rtx (DImode); temp3 = gen_reg_rtx (DImode); } emit_insn (gen_seth44 (temp1, op1)); emit_insn (gen_setm44 (temp2, temp1, op1)); emit_insn (gen_rtx_SET (VOIDmode, temp3, gen_rtx_ASHIFT (DImode, temp2, GEN_INT (12)))); emit_insn (gen_setl44 (op0, temp3, op1)); break; case CM_MEDANY: /* The range spanned by all instructions in the object is less than 2^31 bytes (2GB) and the distance from any instruction to the location of the label _GLOBAL_OFFSET_TABLE_ is less than 2^31 bytes (2GB). The executable can be placed anywhere in the virtual address space. sethi %hh(symbol), %temp1 sethi %lm(symbol), %temp2 or %temp1, %hm(symbol), %temp3 sllx %temp3, 32, %temp4 or %temp4, %temp2, %temp5 or %temp5, %lo(symbol), %reg */ if (temp) { /* It is possible that one of the registers we got for operands[2] might coincide with that of operands[0] (which is why we made it TImode). Pick the other one to use as our scratch. */ if (rtx_equal_p (temp, op0)) { if (ti_temp) temp = gen_rtx_REG (DImode, REGNO (temp) + 1); else abort(); } temp1 = op0; temp2 = temp; /* op0 is _not_ allowed, see above. */ temp3 = op0; temp4 = op0; temp5 = op0; } else { temp1 = gen_reg_rtx (DImode); temp2 = gen_reg_rtx (DImode); temp3 = gen_reg_rtx (DImode); temp4 = gen_reg_rtx (DImode); temp5 = gen_reg_rtx (DImode); } emit_insn (gen_sethh (temp1, op1)); emit_insn (gen_setlm (temp2, op1)); emit_insn (gen_sethm (temp3, temp1, op1)); emit_insn (gen_rtx_SET (VOIDmode, temp4, gen_rtx_ASHIFT (DImode, temp3, GEN_INT (32)))); emit_insn (gen_rtx_SET (VOIDmode, temp5, gen_rtx_PLUS (DImode, temp4, temp2))); emit_insn (gen_setlo (op0, temp5, op1)); break; case CM_EMBMEDANY: /* Old old old backwards compatibility kruft here. Essentially it is MEDLOW with a fixed 64-bit virtual base added to all data segment addresses. Text-segment stuff is computed like MEDANY, we can't reuse the code above because the relocation knobs look different. Data segment: sethi %hi(symbol), %temp1 add %temp1, EMBMEDANY_BASE_REG, %temp2 or %temp2, %lo(symbol), %reg */ if (data_segment_operand (op1, GET_MODE (op1))) { if (temp) { temp1 = temp; /* op0 is allowed. */ temp2 = op0; } else { temp1 = gen_reg_rtx (DImode); temp2 = gen_reg_rtx (DImode); } emit_insn (gen_embmedany_sethi (temp1, op1)); emit_insn (gen_embmedany_brsum (temp2, temp1)); emit_insn (gen_embmedany_losum (op0, temp2, op1)); } /* Text segment: sethi %uhi(symbol), %temp1 sethi %hi(symbol), %temp2 or %temp1, %ulo(symbol), %temp3 sllx %temp3, 32, %temp4 or %temp4, %temp2, %temp5 or %temp5, %lo(symbol), %reg */ else { if (temp) { /* It is possible that one of the registers we got for operands[2] might coincide with that of operands[0] (which is why we made it TImode). Pick the other one to use as our scratch. */ if (rtx_equal_p (temp, op0)) { if (ti_temp) temp = gen_rtx_REG (DImode, REGNO (temp) + 1); else abort(); } temp1 = op0; temp2 = temp; /* op0 is _not_ allowed, see above. */ temp3 = op0; temp4 = op0; temp5 = op0; } else { temp1 = gen_reg_rtx (DImode); temp2 = gen_reg_rtx (DImode); temp3 = gen_reg_rtx (DImode); temp4 = gen_reg_rtx (DImode); temp5 = gen_reg_rtx (DImode); } emit_insn (gen_embmedany_textuhi (temp1, op1)); emit_insn (gen_embmedany_texthi (temp2, op1)); emit_insn (gen_embmedany_textulo (temp3, temp1, op1)); emit_insn (gen_rtx_SET (VOIDmode, temp4, gen_rtx_ASHIFT (DImode, temp3, GEN_INT (32)))); emit_insn (gen_rtx_SET (VOIDmode, temp5, gen_rtx_PLUS (DImode, temp4, temp2))); emit_insn (gen_embmedany_textlo (op0, temp5, op1)); } break; default: abort(); } } /* These avoid problems when cross compiling. If we do not go through all this hair then the optimizer will see invalid REG_EQUAL notes or in some cases none at all. */ static void sparc_emit_set_safe_HIGH64 (rtx, HOST_WIDE_INT); static rtx gen_safe_SET64 (rtx, HOST_WIDE_INT); static rtx gen_safe_OR64 (rtx, HOST_WIDE_INT); static rtx gen_safe_XOR64 (rtx, HOST_WIDE_INT); #if HOST_BITS_PER_WIDE_INT == 64 #define GEN_HIGHINT64(__x) GEN_INT ((__x) & ~(HOST_WIDE_INT)0x3ff) #define GEN_INT64(__x) GEN_INT (__x) #else #define GEN_HIGHINT64(__x) \ immed_double_const ((__x) & ~(HOST_WIDE_INT)0x3ff, 0, DImode) #define GEN_INT64(__x) \ immed_double_const ((__x) & 0xffffffff, \ ((__x) & 0x80000000 ? -1 : 0), DImode) #endif /* The optimizer is not to assume anything about exactly which bits are set for a HIGH, they are unspecified. Unfortunately this leads to many missed optimizations during CSE. We mask out the non-HIGH bits, and matches a plain movdi, to alleviate this problem. */ static void sparc_emit_set_safe_HIGH64 (rtx dest, HOST_WIDE_INT val) { emit_insn (gen_rtx_SET (VOIDmode, dest, GEN_HIGHINT64 (val))); } static rtx gen_safe_SET64 (rtx dest, HOST_WIDE_INT val) { return gen_rtx_SET (VOIDmode, dest, GEN_INT64 (val)); } static rtx gen_safe_OR64 (rtx src, HOST_WIDE_INT val) { return gen_rtx_IOR (DImode, src, GEN_INT64 (val)); } static rtx gen_safe_XOR64 (rtx src, HOST_WIDE_INT val) { return gen_rtx_XOR (DImode, src, GEN_INT64 (val)); } /* Worker routines for 64-bit constant formation on arch64. One of the key things to be doing in these emissions is to create as many temp REGs as possible. This makes it possible for half-built constants to be used later when such values are similar to something required later on. Without doing this, the optimizer cannot see such opportunities. */ static void sparc_emit_set_const64_quick1 (rtx, rtx, unsigned HOST_WIDE_INT, int); static void sparc_emit_set_const64_quick1 (rtx op0, rtx temp, unsigned HOST_WIDE_INT low_bits, int is_neg) { unsigned HOST_WIDE_INT high_bits; if (is_neg) high_bits = (~low_bits) & 0xffffffff; else high_bits = low_bits; sparc_emit_set_safe_HIGH64 (temp, high_bits); if (!is_neg) { emit_insn (gen_rtx_SET (VOIDmode, op0, gen_safe_OR64 (temp, (high_bits & 0x3ff)))); } else { /* If we are XOR'ing with -1, then we should emit a one's complement instead. This way the combiner will notice logical operations such as ANDN later on and substitute. */ if ((low_bits & 0x3ff) == 0x3ff) { emit_insn (gen_rtx_SET (VOIDmode, op0, gen_rtx_NOT (DImode, temp))); } else { emit_insn (gen_rtx_SET (VOIDmode, op0, gen_safe_XOR64 (temp, (-(HOST_WIDE_INT)0x400 | (low_bits & 0x3ff))))); } } } static void sparc_emit_set_const64_quick2 (rtx, rtx, unsigned HOST_WIDE_INT, unsigned HOST_WIDE_INT, int); static void sparc_emit_set_const64_quick2 (rtx op0, rtx temp, unsigned HOST_WIDE_INT high_bits, unsigned HOST_WIDE_INT low_immediate, int shift_count) { rtx temp2 = op0; if ((high_bits & 0xfffffc00) != 0) { sparc_emit_set_safe_HIGH64 (temp, high_bits); if ((high_bits & ~0xfffffc00) != 0) emit_insn (gen_rtx_SET (VOIDmode, op0, gen_safe_OR64 (temp, (high_bits & 0x3ff)))); else temp2 = temp; } else { emit_insn (gen_safe_SET64 (temp, high_bits)); temp2 = temp; } /* Now shift it up into place. */ emit_insn (gen_rtx_SET (VOIDmode, op0, gen_rtx_ASHIFT (DImode, temp2, GEN_INT (shift_count)))); /* If there is a low immediate part piece, finish up by putting that in as well. */ if (low_immediate != 0) emit_insn (gen_rtx_SET (VOIDmode, op0, gen_safe_OR64 (op0, low_immediate))); } static void sparc_emit_set_const64_longway (rtx, rtx, unsigned HOST_WIDE_INT, unsigned HOST_WIDE_INT); /* Full 64-bit constant decomposition. Even though this is the 'worst' case, we still optimize a few things away. */ static void sparc_emit_set_const64_longway (rtx op0, rtx temp, unsigned HOST_WIDE_INT high_bits, unsigned HOST_WIDE_INT low_bits) { rtx sub_temp; if (reload_in_progress || reload_completed) sub_temp = op0; else sub_temp = gen_reg_rtx (DImode); if ((high_bits & 0xfffffc00) != 0) { sparc_emit_set_safe_HIGH64 (temp, high_bits); if ((high_bits & ~0xfffffc00) != 0) emit_insn (gen_rtx_SET (VOIDmode, sub_temp, gen_safe_OR64 (temp, (high_bits & 0x3ff)))); else sub_temp = temp; } else { emit_insn (gen_safe_SET64 (temp, high_bits)); sub_temp = temp; } if (!reload_in_progress && !reload_completed) { rtx temp2 = gen_reg_rtx (DImode); rtx temp3 = gen_reg_rtx (DImode); rtx temp4 = gen_reg_rtx (DImode); emit_insn (gen_rtx_SET (VOIDmode, temp4, gen_rtx_ASHIFT (DImode, sub_temp, GEN_INT (32)))); sparc_emit_set_safe_HIGH64 (temp2, low_bits); if ((low_bits & ~0xfffffc00) != 0) { emit_insn (gen_rtx_SET (VOIDmode, temp3, gen_safe_OR64 (temp2, (low_bits & 0x3ff)))); emit_insn (gen_rtx_SET (VOIDmode, op0, gen_rtx_PLUS (DImode, temp4, temp3))); } else { emit_insn (gen_rtx_SET (VOIDmode, op0, gen_rtx_PLUS (DImode, temp4, temp2))); } } else { rtx low1 = GEN_INT ((low_bits >> (32 - 12)) & 0xfff); rtx low2 = GEN_INT ((low_bits >> (32 - 12 - 12)) & 0xfff); rtx low3 = GEN_INT ((low_bits >> (32 - 12 - 12 - 8)) & 0x0ff); int to_shift = 12; /* We are in the middle of reload, so this is really painful. However we do still make an attempt to avoid emitting truly stupid code. */ if (low1 != const0_rtx) { emit_insn (gen_rtx_SET (VOIDmode, op0, gen_rtx_ASHIFT (DImode, sub_temp, GEN_INT (to_shift)))); emit_insn (gen_rtx_SET (VOIDmode, op0, gen_rtx_IOR (DImode, op0, low1))); sub_temp = op0; to_shift = 12; } else { to_shift += 12; } if (low2 != const0_rtx) { emit_insn (gen_rtx_SET (VOIDmode, op0, gen_rtx_ASHIFT (DImode, sub_temp, GEN_INT (to_shift)))); emit_insn (gen_rtx_SET (VOIDmode, op0, gen_rtx_IOR (DImode, op0, low2))); sub_temp = op0; to_shift = 8; } else { to_shift += 8; } emit_insn (gen_rtx_SET (VOIDmode, op0, gen_rtx_ASHIFT (DImode, sub_temp, GEN_INT (to_shift)))); if (low3 != const0_rtx) emit_insn (gen_rtx_SET (VOIDmode, op0, gen_rtx_IOR (DImode, op0, low3))); /* phew... */ } } /* Analyze a 64-bit constant for certain properties. */ static void analyze_64bit_constant (unsigned HOST_WIDE_INT, unsigned HOST_WIDE_INT, int *, int *, int *); static void analyze_64bit_constant (unsigned HOST_WIDE_INT high_bits, unsigned HOST_WIDE_INT low_bits, int *hbsp, int *lbsp, int *abbasp) { int lowest_bit_set, highest_bit_set, all_bits_between_are_set; int i; lowest_bit_set = highest_bit_set = -1; i = 0; do { if ((lowest_bit_set == -1) && ((low_bits >> i) & 1)) lowest_bit_set = i; if ((highest_bit_set == -1) && ((high_bits >> (32 - i - 1)) & 1)) highest_bit_set = (64 - i - 1); } while (++i < 32 && ((highest_bit_set == -1) || (lowest_bit_set == -1))); if (i == 32) { i = 0; do { if ((lowest_bit_set == -1) && ((high_bits >> i) & 1)) lowest_bit_set = i + 32; if ((highest_bit_set == -1) && ((low_bits >> (32 - i - 1)) & 1)) highest_bit_set = 32 - i - 1; } while (++i < 32 && ((highest_bit_set == -1) || (lowest_bit_set == -1))); } /* If there are no bits set this should have gone out as one instruction! */ if (lowest_bit_set == -1 || highest_bit_set == -1) abort (); all_bits_between_are_set = 1; for (i = lowest_bit_set; i <= highest_bit_set; i++) { if (i < 32) { if ((low_bits & (1 << i)) != 0) continue; } else { if ((high_bits & (1 << (i - 32))) != 0) continue; } all_bits_between_are_set = 0; break; } *hbsp = highest_bit_set; *lbsp = lowest_bit_set; *abbasp = all_bits_between_are_set; } static int const64_is_2insns (unsigned HOST_WIDE_INT, unsigned HOST_WIDE_INT); static int const64_is_2insns (unsigned HOST_WIDE_INT high_bits, unsigned HOST_WIDE_INT low_bits) { int highest_bit_set, lowest_bit_set, all_bits_between_are_set; if (high_bits == 0 || high_bits == 0xffffffff) return 1; analyze_64bit_constant (high_bits, low_bits, &highest_bit_set, &lowest_bit_set, &all_bits_between_are_set); if ((highest_bit_set == 63 || lowest_bit_set == 0) && all_bits_between_are_set != 0) return 1; if ((highest_bit_set - lowest_bit_set) < 21) return 1; return 0; } static unsigned HOST_WIDE_INT create_simple_focus_bits (unsigned HOST_WIDE_INT, unsigned HOST_WIDE_INT, int, int); static unsigned HOST_WIDE_INT create_simple_focus_bits (unsigned HOST_WIDE_INT high_bits, unsigned HOST_WIDE_INT low_bits, int lowest_bit_set, int shift) { HOST_WIDE_INT hi, lo; if (lowest_bit_set < 32) { lo = (low_bits >> lowest_bit_set) << shift; hi = ((high_bits << (32 - lowest_bit_set)) << shift); } else { lo = 0; hi = ((high_bits >> (lowest_bit_set - 32)) << shift); } if (hi & lo) abort (); return (hi | lo); } /* Here we are sure to be arch64 and this is an integer constant being loaded into a register. Emit the most efficient insn sequence possible. Detection of all the 1-insn cases has been done already. */ void sparc_emit_set_const64 (rtx op0, rtx op1) { unsigned HOST_WIDE_INT high_bits, low_bits; int lowest_bit_set, highest_bit_set; int all_bits_between_are_set; rtx temp = 0; /* Sanity check that we know what we are working with. */ if (! TARGET_ARCH64) abort (); if (GET_CODE (op0) != SUBREG) { if (GET_CODE (op0) != REG || (REGNO (op0) >= SPARC_FIRST_FP_REG && REGNO (op0) <= SPARC_LAST_V9_FP_REG)) abort (); } if (reload_in_progress || reload_completed) temp = op0; if (GET_CODE (op1) != CONST_DOUBLE && GET_CODE (op1) != CONST_INT) { sparc_emit_set_symbolic_const64 (op0, op1, temp); return; } if (! temp) temp = gen_reg_rtx (DImode); if (GET_CODE (op1) == CONST_DOUBLE) { #if HOST_BITS_PER_WIDE_INT == 64 high_bits = (CONST_DOUBLE_LOW (op1) >> 32) & 0xffffffff; low_bits = CONST_DOUBLE_LOW (op1) & 0xffffffff; #else high_bits = CONST_DOUBLE_HIGH (op1); low_bits = CONST_DOUBLE_LOW (op1); #endif } else { #if HOST_BITS_PER_WIDE_INT == 64 high_bits = ((INTVAL (op1) >> 32) & 0xffffffff); low_bits = (INTVAL (op1) & 0xffffffff); #else high_bits = ((INTVAL (op1) < 0) ? 0xffffffff : 0x00000000); low_bits = INTVAL (op1); #endif } /* low_bits bits 0 --> 31 high_bits bits 32 --> 63 */ analyze_64bit_constant (high_bits, low_bits, &highest_bit_set, &lowest_bit_set, &all_bits_between_are_set); /* First try for a 2-insn sequence. */ /* These situations are preferred because the optimizer can * do more things with them: * 1) mov -1, %reg * sllx %reg, shift, %reg * 2) mov -1, %reg * srlx %reg, shift, %reg * 3) mov some_small_const, %reg * sllx %reg, shift, %reg */ if (((highest_bit_set == 63 || lowest_bit_set == 0) && all_bits_between_are_set != 0) || ((highest_bit_set - lowest_bit_set) < 12)) { HOST_WIDE_INT the_const = -1; int shift = lowest_bit_set; if ((highest_bit_set != 63 && lowest_bit_set != 0) || all_bits_between_are_set == 0) { the_const = create_simple_focus_bits (high_bits, low_bits, lowest_bit_set, 0); } else if (lowest_bit_set == 0) shift = -(63 - highest_bit_set); if (! SPARC_SIMM13_P (the_const)) abort (); emit_insn (gen_safe_SET64 (temp, the_const)); if (shift > 0) emit_insn (gen_rtx_SET (VOIDmode, op0, gen_rtx_ASHIFT (DImode, temp, GEN_INT (shift)))); else if (shift < 0) emit_insn (gen_rtx_SET (VOIDmode, op0, gen_rtx_LSHIFTRT (DImode, temp, GEN_INT (-shift)))); else abort (); return; } /* Now a range of 22 or less bits set somewhere. * 1) sethi %hi(focus_bits), %reg * sllx %reg, shift, %reg * 2) sethi %hi(focus_bits), %reg * srlx %reg, shift, %reg */ if ((highest_bit_set - lowest_bit_set) < 21) { unsigned HOST_WIDE_INT focus_bits = create_simple_focus_bits (high_bits, low_bits, lowest_bit_set, 10); if (! SPARC_SETHI_P (focus_bits)) abort (); sparc_emit_set_safe_HIGH64 (temp, focus_bits); /* If lowest_bit_set == 10 then a sethi alone could have done it. */ if (lowest_bit_set < 10) emit_insn (gen_rtx_SET (VOIDmode, op0, gen_rtx_LSHIFTRT (DImode, temp, GEN_INT (10 - lowest_bit_set)))); else if (lowest_bit_set > 10) emit_insn (gen_rtx_SET (VOIDmode, op0, gen_rtx_ASHIFT (DImode, temp, GEN_INT (lowest_bit_set - 10)))); else abort (); return; } /* 1) sethi %hi(low_bits), %reg * or %reg, %lo(low_bits), %reg * 2) sethi %hi(~low_bits), %reg * xor %reg, %lo(-0x400 | (low_bits & 0x3ff)), %reg */ if (high_bits == 0 || high_bits == 0xffffffff) { sparc_emit_set_const64_quick1 (op0, temp, low_bits, (high_bits == 0xffffffff)); return; } /* Now, try 3-insn sequences. */ /* 1) sethi %hi(high_bits), %reg * or %reg, %lo(high_bits), %reg * sllx %reg, 32, %reg */ if (low_bits == 0) { sparc_emit_set_const64_quick2 (op0, temp, high_bits, 0, 32); return; } /* We may be able to do something quick when the constant is negated, so try that. */ if (const64_is_2insns ((~high_bits) & 0xffffffff, (~low_bits) & 0xfffffc00)) { /* NOTE: The trailing bits get XOR'd so we need the non-negated bits, not the negated ones. */ unsigned HOST_WIDE_INT trailing_bits = low_bits & 0x3ff; if ((((~high_bits) & 0xffffffff) == 0 && ((~low_bits) & 0x80000000) == 0) || (((~high_bits) & 0xffffffff) == 0xffffffff && ((~low_bits) & 0x80000000) != 0)) { int fast_int = (~low_bits & 0xffffffff); if ((SPARC_SETHI_P (fast_int) && (~high_bits & 0xffffffff) == 0) || SPARC_SIMM13_P (fast_int)) emit_insn (gen_safe_SET64 (temp, fast_int)); else sparc_emit_set_const64 (temp, GEN_INT64 (fast_int)); } else { rtx negated_const; #if HOST_BITS_PER_WIDE_INT == 64 negated_const = GEN_INT (((~low_bits) & 0xfffffc00) | (((HOST_WIDE_INT)((~high_bits) & 0xffffffff))<<32)); #else negated_const = immed_double_const ((~low_bits) & 0xfffffc00, (~high_bits) & 0xffffffff, DImode); #endif sparc_emit_set_const64 (temp, negated_const); } /* If we are XOR'ing with -1, then we should emit a one's complement instead. This way the combiner will notice logical operations such as ANDN later on and substitute. */ if (trailing_bits == 0x3ff) { emit_insn (gen_rtx_SET (VOIDmode, op0, gen_rtx_NOT (DImode, temp))); } else { emit_insn (gen_rtx_SET (VOIDmode, op0, gen_safe_XOR64 (temp, (-0x400 | trailing_bits)))); } return; } /* 1) sethi %hi(xxx), %reg * or %reg, %lo(xxx), %reg * sllx %reg, yyy, %reg * * ??? This is just a generalized version of the low_bits==0 * thing above, FIXME... */ if ((highest_bit_set - lowest_bit_set) < 32) { unsigned HOST_WIDE_INT focus_bits = create_simple_focus_bits (high_bits, low_bits, lowest_bit_set, 0); /* We can't get here in this state. */ if (highest_bit_set < 32 || lowest_bit_set >= 32) abort (); /* So what we know is that the set bits straddle the middle of the 64-bit word. */ sparc_emit_set_const64_quick2 (op0, temp, focus_bits, 0, lowest_bit_set); return; } /* 1) sethi %hi(high_bits), %reg * or %reg, %lo(high_bits), %reg * sllx %reg, 32, %reg * or %reg, low_bits, %reg */ if (SPARC_SIMM13_P(low_bits) && ((int)low_bits > 0)) { sparc_emit_set_const64_quick2 (op0, temp, high_bits, low_bits, 32); return; } /* The easiest way when all else fails, is full decomposition. */ #if 0 printf ("sparc_emit_set_const64: Hard constant [%08lx%08lx] neg[%08lx%08lx]\n", high_bits, low_bits, ~high_bits, ~low_bits); #endif sparc_emit_set_const64_longway (op0, temp, high_bits, low_bits); } /* Given a comparison code (EQ, NE, etc.) and the first operand of a COMPARE, return the mode to be used for the comparison. For floating-point, CCFP[E]mode is used. CC_NOOVmode should be used when the first operand is a PLUS, MINUS, NEG, or ASHIFT. CCmode should be used when no special processing is needed. */ enum machine_mode select_cc_mode (enum rtx_code op, rtx x, rtx y ATTRIBUTE_UNUSED) { if (GET_MODE_CLASS (GET_MODE (x)) == MODE_FLOAT) { switch (op) { case EQ: case NE: case UNORDERED: case ORDERED: case UNLT: case UNLE: case UNGT: case UNGE: case UNEQ: case LTGT: return CCFPmode; case LT: case LE: case GT: case GE: return CCFPEmode; default: abort (); } } else if (GET_CODE (x) == PLUS || GET_CODE (x) == MINUS || GET_CODE (x) == NEG || GET_CODE (x) == ASHIFT) { if (TARGET_ARCH64 && GET_MODE (x) == DImode) return CCX_NOOVmode; else return CC_NOOVmode; } else { if (TARGET_ARCH64 && GET_MODE (x) == DImode) return CCXmode; else return CCmode; } } /* X and Y are two things to compare using CODE. Emit the compare insn and return the rtx for the cc reg in the proper mode. */ rtx gen_compare_reg (enum rtx_code code, rtx x, rtx y) { enum machine_mode mode = SELECT_CC_MODE (code, x, y); rtx cc_reg; /* ??? We don't have movcc patterns so we cannot generate pseudo regs for the fcc regs (cse can't tell they're really call clobbered regs and will remove a duplicate comparison even if there is an intervening function call - it will then try to reload the cc reg via an int reg which is why we need the movcc patterns). It is possible to provide the movcc patterns by using the ldxfsr/stxfsr v9 insns. I tried it: you need two registers (say %g1,%g5) and it takes about 6 insns. A better fix would be to tell cse that CCFPE mode registers (even pseudos) are call clobbered. */ /* ??? This is an experiment. Rather than making changes to cse which may or may not be easy/clean, we do our own cse. This is possible because we will generate hard registers. Cse knows they're call clobbered (it doesn't know the same thing about pseudos). If we guess wrong, no big deal, but if we win, great! */ if (TARGET_V9 && GET_MODE_CLASS (GET_MODE (x)) == MODE_FLOAT) #if 1 /* experiment */ { int reg; /* We cycle through the registers to ensure they're all exercised. */ static int next_fcc_reg = 0; /* Previous x,y for each fcc reg. */ static rtx prev_args[4][2]; /* Scan prev_args for x,y. */ for (reg = 0; reg < 4; reg++) if (prev_args[reg][0] == x && prev_args[reg][1] == y) break; if (reg == 4) { reg = next_fcc_reg; prev_args[reg][0] = x; prev_args[reg][1] = y; next_fcc_reg = (next_fcc_reg + 1) & 3; } cc_reg = gen_rtx_REG (mode, reg + SPARC_FIRST_V9_FCC_REG); } #else cc_reg = gen_reg_rtx (mode); #endif /* ! experiment */ else if (GET_MODE_CLASS (GET_MODE (x)) == MODE_FLOAT) cc_reg = gen_rtx_REG (mode, SPARC_FCC_REG); else cc_reg = gen_rtx_REG (mode, SPARC_ICC_REG); emit_insn (gen_rtx_SET (VOIDmode, cc_reg, gen_rtx_COMPARE (mode, x, y))); return cc_reg; } /* This function is used for v9 only. CODE is the code for an Scc's comparison. OPERANDS[0] is the target of the Scc insn. OPERANDS[1] is the value we compare against const0_rtx (which hasn't been generated yet). This function is needed to turn (set (reg:SI 110) (gt (reg:CCX 100 %icc) (const_int 0))) into (set (reg:SI 110) (gt:DI (reg:CCX 100 %icc) (const_int 0))) IE: The instruction recognizer needs to see the mode of the comparison to find the right instruction. We could use "gt:DI" right in the define_expand, but leaving it out allows us to handle DI, SI, etc. We refer to the global sparc compare operands sparc_compare_op0 and sparc_compare_op1. */ int gen_v9_scc (enum rtx_code compare_code, register rtx *operands) { rtx temp, op0, op1; if (! TARGET_ARCH64 && (GET_MODE (sparc_compare_op0) == DImode || GET_MODE (operands[0]) == DImode)) return 0; op0 = sparc_compare_op0; op1 = sparc_compare_op1; /* Try to use the movrCC insns. */ if (TARGET_ARCH64 && GET_MODE_CLASS (GET_MODE (op0)) == MODE_INT && op1 == const0_rtx && v9_regcmp_p (compare_code)) { /* Special case for op0 != 0. This can be done with one instruction if operands[0] == sparc_compare_op0. */ if (compare_code == NE && GET_MODE (operands[0]) == DImode && rtx_equal_p (op0, operands[0])) { emit_insn (gen_rtx_SET (VOIDmode, operands[0], gen_rtx_IF_THEN_ELSE (DImode, gen_rtx_fmt_ee (compare_code, DImode, op0, const0_rtx), const1_rtx, operands[0]))); return 1; } if (reg_overlap_mentioned_p (operands[0], op0)) { /* Handle the case where operands[0] == sparc_compare_op0. We "early clobber" the result. */ op0 = gen_reg_rtx (GET_MODE (sparc_compare_op0)); emit_move_insn (op0, sparc_compare_op0); } emit_insn (gen_rtx_SET (VOIDmode, operands[0], const0_rtx)); if (GET_MODE (op0) != DImode) { temp = gen_reg_rtx (DImode); convert_move (temp, op0, 0); } else temp = op0; emit_insn (gen_rtx_SET (VOIDmode, operands[0], gen_rtx_IF_THEN_ELSE (GET_MODE (operands[0]), gen_rtx_fmt_ee (compare_code, DImode, temp, const0_rtx), const1_rtx, operands[0]))); return 1; } else { operands[1] = gen_compare_reg (compare_code, op0, op1); switch (GET_MODE (operands[1])) { case CCmode : case CCXmode : case CCFPEmode : case CCFPmode : break; default : abort (); } emit_insn (gen_rtx_SET (VOIDmode, operands[0], const0_rtx)); emit_insn (gen_rtx_SET (VOIDmode, operands[0], gen_rtx_IF_THEN_ELSE (GET_MODE (operands[0]), gen_rtx_fmt_ee (compare_code, GET_MODE (operands[1]), operands[1], const0_rtx), const1_rtx, operands[0]))); return 1; } } /* Emit a conditional jump insn for the v9 architecture using comparison code CODE and jump target LABEL. This function exists to take advantage of the v9 brxx insns. */ void emit_v9_brxx_insn (enum rtx_code code, rtx op0, rtx label) { emit_jump_insn (gen_rtx_SET (VOIDmode, pc_rtx, gen_rtx_IF_THEN_ELSE (VOIDmode, gen_rtx_fmt_ee (code, GET_MODE (op0), op0, const0_rtx), gen_rtx_LABEL_REF (VOIDmode, label), pc_rtx))); } /* Generate a DFmode part of a hard TFmode register. REG is the TFmode hard register, LOW is 1 for the low 64bit of the register and 0 otherwise. */ rtx gen_df_reg (rtx reg, int low) { int regno = REGNO (reg); if ((WORDS_BIG_ENDIAN == 0) ^ (low != 0)) regno += (TARGET_ARCH64 && regno < 32) ? 1 : 2; return gen_rtx_REG (DFmode, regno); } /* Generate a call to FUNC with OPERANDS. Operand 0 is the return value. Unlike normal calls, TFmode operands are passed by reference. It is assumed that no more than 3 operands are required. */ static void emit_soft_tfmode_libcall (const char *func_name, int nargs, rtx *operands) { rtx ret_slot = NULL, arg[3], func_sym; int i; /* We only expect to be called for conversions, unary, and binary ops. */ if (nargs < 2 || nargs > 3) abort (); for (i = 0; i < nargs; ++i) { rtx this_arg = operands[i]; rtx this_slot; /* TFmode arguments and return values are passed by reference. */ if (GET_MODE (this_arg) == TFmode) { int force_stack_temp; force_stack_temp = 0; if (TARGET_BUGGY_QP_LIB && i == 0) force_stack_temp = 1; if (GET_CODE (this_arg) == MEM && ! force_stack_temp) this_arg = XEXP (this_arg, 0); else if (CONSTANT_P (this_arg) && ! force_stack_temp) { this_slot = force_const_mem (TFmode, this_arg); this_arg = XEXP (this_slot, 0); } else { this_slot = assign_stack_temp (TFmode, GET_MODE_SIZE (TFmode), 0); /* Operand 0 is the return value. We'll copy it out later. */ if (i > 0) emit_move_insn (this_slot, this_arg); else ret_slot = this_slot; this_arg = XEXP (this_slot, 0); } } arg[i] = this_arg; } func_sym = gen_rtx_SYMBOL_REF (Pmode, func_name); if (GET_MODE (operands[0]) == TFmode) { if (nargs == 2) emit_library_call (func_sym, LCT_NORMAL, VOIDmode, 2, arg[0], GET_MODE (arg[0]), arg[1], GET_MODE (arg[1])); else emit_library_call (func_sym, LCT_NORMAL, VOIDmode, 3, arg[0], GET_MODE (arg[0]), arg[1], GET_MODE (arg[1]), arg[2], GET_MODE (arg[2])); if (ret_slot) emit_move_insn (operands[0], ret_slot); } else { rtx ret; if (nargs != 2) abort (); ret = emit_library_call_value (func_sym, operands[0], LCT_NORMAL, GET_MODE (operands[0]), 1, arg[1], GET_MODE (arg[1])); if (ret != operands[0]) emit_move_insn (operands[0], ret); } } /* Expand soft-float TFmode calls to sparc abi routines. */ static void emit_soft_tfmode_binop (enum rtx_code code, rtx *operands) { const char *func; switch (code) { case PLUS: func = "_Qp_add"; break; case MINUS: func = "_Qp_sub"; break; case MULT: func = "_Qp_mul"; break; case DIV: func = "_Qp_div"; break; default: abort (); } emit_soft_tfmode_libcall (func, 3, operands); } static void emit_soft_tfmode_unop (enum rtx_code code, rtx *operands) { const char *func; switch (code) { case SQRT: func = "_Qp_sqrt"; break; default: abort (); } emit_soft_tfmode_libcall (func, 2, operands); } static void emit_soft_tfmode_cvt (enum rtx_code code, rtx *operands) { const char *func; switch (code) { case FLOAT_EXTEND: switch (GET_MODE (operands[1])) { case SFmode: func = "_Qp_stoq"; break; case DFmode: func = "_Qp_dtoq"; break; default: abort (); } break; case FLOAT_TRUNCATE: switch (GET_MODE (operands[0])) { case SFmode: func = "_Qp_qtos"; break; case DFmode: func = "_Qp_qtod"; break; default: abort (); } break; case FLOAT: switch (GET_MODE (operands[1])) { case SImode: func = "_Qp_itoq"; break; case DImode: func = "_Qp_xtoq"; break; default: abort (); } break; case UNSIGNED_FLOAT: switch (GET_MODE (operands[1])) { case SImode: func = "_Qp_uitoq"; break; case DImode: func = "_Qp_uxtoq"; break; default: abort (); } break; case FIX: switch (GET_MODE (operands[0])) { case SImode: func = "_Qp_qtoi"; break; case DImode: func = "_Qp_qtox"; break; default: abort (); } break; case UNSIGNED_FIX: switch (GET_MODE (operands[0])) { case SImode: func = "_Qp_qtoui"; break; case DImode: func = "_Qp_qtoux"; break; default: abort (); } break; default: abort (); } emit_soft_tfmode_libcall (func, 2, operands); } /* Expand a hard-float tfmode operation. All arguments must be in registers. */ static void emit_hard_tfmode_operation (enum rtx_code code, rtx *operands) { rtx op, dest; if (GET_RTX_CLASS (code) == RTX_UNARY) { operands[1] = force_reg (GET_MODE (operands[1]), operands[1]); op = gen_rtx_fmt_e (code, GET_MODE (operands[0]), operands[1]); } else { operands[1] = force_reg (GET_MODE (operands[1]), operands[1]); operands[2] = force_reg (GET_MODE (operands[2]), operands[2]); op = gen_rtx_fmt_ee (code, GET_MODE (operands[0]), operands[1], operands[2]); } if (register_operand (operands[0], VOIDmode)) dest = operands[0]; else dest = gen_reg_rtx (GET_MODE (operands[0])); emit_insn (gen_rtx_SET (VOIDmode, dest, op)); if (dest != operands[0]) emit_move_insn (operands[0], dest); } void emit_tfmode_binop (enum rtx_code code, rtx *operands) { if (TARGET_HARD_QUAD) emit_hard_tfmode_operation (code, operands); else emit_soft_tfmode_binop (code, operands); } void emit_tfmode_unop (enum rtx_code code, rtx *operands) { if (TARGET_HARD_QUAD) emit_hard_tfmode_operation (code, operands); else emit_soft_tfmode_unop (code, operands); } void emit_tfmode_cvt (enum rtx_code code, rtx *operands) { if (TARGET_HARD_QUAD) emit_hard_tfmode_operation (code, operands); else emit_soft_tfmode_cvt (code, operands); } /* Return nonzero if a branch/jump/call instruction will be emitting nop into its delay slot. */ int empty_delay_slot (rtx insn) { rtx seq; /* If no previous instruction (should not happen), return true. */ if (PREV_INSN (insn) == NULL) return 1; seq = NEXT_INSN (PREV_INSN (insn)); if (GET_CODE (PATTERN (seq)) == SEQUENCE) return 0; return 1; } /* Return nonzero if TRIAL can go into the call delay slot. */ int tls_call_delay (rtx trial) { rtx pat, unspec; /* Binutils allows call __tls_get_addr, %tgd_call (foo) add %l7, %o0, %o0, %tgd_add (foo) while Sun as/ld does not. */ if (TARGET_GNU_TLS || !TARGET_TLS) return 1; pat = PATTERN (trial); if (GET_CODE (pat) != SET || GET_CODE (SET_DEST (pat)) != PLUS) return 1; unspec = XEXP (SET_DEST (pat), 1); if (GET_CODE (unspec) != UNSPEC || (XINT (unspec, 1) != UNSPEC_TLSGD && XINT (unspec, 1) != UNSPEC_TLSLDM)) return 1; return 0; } /* Return nonzero if TRIAL, an insn, can be combined with a 'restore' instruction. RETURN_P is true if the v9 variant 'return' is to be considered in the test too. TRIAL must be a SET whose destination is a REG appropriate for the 'restore' instruction or, if RETURN_P is true, for the 'return' instruction. */ static int eligible_for_restore_insn (rtx trial, bool return_p) { rtx pat = PATTERN (trial); rtx src = SET_SRC (pat); /* The 'restore src,%g0,dest' pattern for word mode and below. */ if (GET_MODE_CLASS (GET_MODE (src)) != MODE_FLOAT && arith_operand (src, GET_MODE (src))) { if (TARGET_ARCH64) return GET_MODE_SIZE (GET_MODE (src)) <= GET_MODE_SIZE (DImode); else return GET_MODE_SIZE (GET_MODE (src)) <= GET_MODE_SIZE (SImode); } /* The 'restore src,%g0,dest' pattern for double-word mode. */ else if (GET_MODE_CLASS (GET_MODE (src)) != MODE_FLOAT && arith_double_operand (src, GET_MODE (src))) return GET_MODE_SIZE (GET_MODE (src)) <= GET_MODE_SIZE (DImode); /* The 'restore src,%g0,dest' pattern for float if no FPU. */ else if (! TARGET_FPU && register_operand (src, SFmode)) return 1; /* The 'restore src,%g0,dest' pattern for double if no FPU. */ else if (! TARGET_FPU && TARGET_ARCH64 && register_operand (src, DFmode)) return 1; /* If we have the 'return' instruction, anything that does not use local or output registers and can go into a delay slot wins. */ else if (return_p && TARGET_V9 && ! epilogue_renumber (&pat, 1) && (get_attr_in_uncond_branch_delay (trial) == IN_UNCOND_BRANCH_DELAY_TRUE)) return 1; /* The 'restore src1,src2,dest' pattern for SImode. */ else if (GET_CODE (src) == PLUS && register_operand (XEXP (src, 0), SImode) && arith_operand (XEXP (src, 1), SImode)) return 1; /* The 'restore src1,src2,dest' pattern for DImode. */ else if (GET_CODE (src) == PLUS && register_operand (XEXP (src, 0), DImode) && arith_double_operand (XEXP (src, 1), DImode)) return 1; /* The 'restore src1,%lo(src2),dest' pattern. */ else if (GET_CODE (src) == LO_SUM && ! TARGET_CM_MEDMID && ((register_operand (XEXP (src, 0), SImode) && immediate_operand (XEXP (src, 1), SImode)) || (TARGET_ARCH64 && register_operand (XEXP (src, 0), DImode) && immediate_operand (XEXP (src, 1), DImode)))) return 1; /* The 'restore src,src,dest' pattern. */ else if (GET_CODE (src) == ASHIFT && (register_operand (XEXP (src, 0), SImode) || register_operand (XEXP (src, 0), DImode)) && XEXP (src, 1) == const1_rtx) return 1; return 0; } /* Return nonzero if TRIAL can go into the function return's delay slot. */ int eligible_for_return_delay (rtx trial) { int leaf_function_p = current_function_uses_only_leaf_regs; rtx pat; if (GET_CODE (trial) != INSN || GET_CODE (PATTERN (trial)) != SET) return 0; if (get_attr_length (trial) != 1) return 0; /* If there are any call-saved registers, we should scan TRIAL if it does not reference them. For now just make it easy. */ if (num_gfregs) return 0; /* If the function uses __builtin_eh_return, the eh_return machinery occupies the delay slot. */ if (current_function_calls_eh_return) return 0; /* In the case of a true leaf function, anything can go into the slot. */ if (leaf_function_p) return get_attr_in_uncond_branch_delay (trial) == IN_UNCOND_BRANCH_DELAY_TRUE; pat = PATTERN (trial); /* Otherwise, only operations which can be done in tandem with a `restore' or `return' insn can go into the delay slot. */ if (GET_CODE (SET_DEST (pat)) != REG || (REGNO (SET_DEST (pat)) >= 8 && REGNO (SET_DEST (pat)) < 24)) return 0; /* If this instruction sets up floating point register and we have a return instruction, it can probably go in. But restore will not work with FP_REGS. */ if (REGNO (SET_DEST (pat)) >= 32) return (TARGET_V9 && ! epilogue_renumber (&pat, 1) && (get_attr_in_uncond_branch_delay (trial) == IN_UNCOND_BRANCH_DELAY_TRUE)); return eligible_for_restore_insn (trial, true); } /* Return nonzero if TRIAL can go into the sibling call's delay slot. */ int eligible_for_sibcall_delay (rtx trial) { int leaf_function_p = current_function_uses_only_leaf_regs; rtx pat; if (GET_CODE (trial) != INSN || GET_CODE (PATTERN (trial)) != SET) return 0; if (get_attr_length (trial) != 1) return 0; pat = PATTERN (trial); if (leaf_function_p) { /* If the tail call is done using the call instruction, we have to restore %o7 in the delay slot. */ if (LEAF_SIBCALL_SLOT_RESERVED_P) return 0; /* %g1 is used to build the function address */ if (reg_mentioned_p (gen_rtx_REG (Pmode, 1), pat)) return 0; return 1; } /* Otherwise, only operations which can be done in tandem with a `restore' insn can go into the delay slot. */ if (GET_CODE (SET_DEST (pat)) != REG || (REGNO (SET_DEST (pat)) >= 8 && REGNO (SET_DEST (pat)) < 24) || REGNO (SET_DEST (pat)) >= 32) return 0; /* If it mentions %o7, it can't go in, because sibcall will clobber it in most cases. */ if (reg_mentioned_p (gen_rtx_REG (Pmode, 15), pat)) return 0; return eligible_for_restore_insn (trial, false); } int short_branch (int uid1, int uid2) { int delta = INSN_ADDRESSES (uid1) - INSN_ADDRESSES (uid2); /* Leave a few words of "slop". */ if (delta >= -1023 && delta <= 1022) return 1; return 0; } /* Return nonzero if REG is not used after INSN. We assume REG is a reload reg, and therefore does not live past labels or calls or jumps. */ int reg_unused_after (rtx reg, rtx insn) { enum rtx_code code, prev_code = UNKNOWN; while ((insn = NEXT_INSN (insn))) { if (prev_code == CALL_INSN && call_used_regs[REGNO (reg)]) return 1; code = GET_CODE (insn); if (GET_CODE (insn) == CODE_LABEL) return 1; if (INSN_P (insn)) { rtx set = single_set (insn); int in_src = set && reg_overlap_mentioned_p (reg, SET_SRC (set)); if (set && in_src) return 0; if (set && reg_overlap_mentioned_p (reg, SET_DEST (set))) return 1; if (set == 0 && reg_overlap_mentioned_p (reg, PATTERN (insn))) return 0; } prev_code = code; } return 1; } /* Determine if it's legal to put X into the constant pool. This is not possible if X contains the address of a symbol that is not constant (TLS) or not known at final link time (PIC). */ static bool sparc_cannot_force_const_mem (rtx x) { switch (GET_CODE (x)) { case CONST_INT: case CONST_DOUBLE: /* Accept all non-symbolic constants. */ return false; case LABEL_REF: /* Labels are OK iff we are non-PIC. */ return flag_pic != 0; case SYMBOL_REF: /* 'Naked' TLS symbol references are never OK, non-TLS symbols are OK iff we are non-PIC. */ if (SYMBOL_REF_TLS_MODEL (x)) return true; else return flag_pic != 0; case CONST: return sparc_cannot_force_const_mem (XEXP (x, 0)); case PLUS: case MINUS: return sparc_cannot_force_const_mem (XEXP (x, 0)) || sparc_cannot_force_const_mem (XEXP (x, 1)); case UNSPEC: return true; default: abort (); } } /* The table we use to reference PIC data. */ static GTY(()) rtx global_offset_table; /* The function we use to get at it. */ static GTY(()) rtx add_pc_to_pic_symbol; static GTY(()) char add_pc_to_pic_symbol_name[256]; /* Ensure that we are not using patterns that are not OK with PIC. */ int check_pic (int i) { switch (flag_pic) { case 1: if (GET_CODE (recog_data.operand[i]) == SYMBOL_REF || (GET_CODE (recog_data.operand[i]) == CONST && ! (GET_CODE (XEXP (recog_data.operand[i], 0)) == MINUS && (XEXP (XEXP (recog_data.operand[i], 0), 0) == global_offset_table) && (GET_CODE (XEXP (XEXP (recog_data.operand[i], 0), 1)) == CONST)))) abort (); case 2: default: return 1; } } /* Return true if X is an address which needs a temporary register when reloaded while generating PIC code. */ int pic_address_needs_scratch (rtx x) { /* An address which is a symbolic plus a non SMALL_INT needs a temp reg. */ if (GET_CODE (x) == CONST && GET_CODE (XEXP (x, 0)) == PLUS && GET_CODE (XEXP (XEXP (x, 0), 0)) == SYMBOL_REF && GET_CODE (XEXP (XEXP (x, 0), 1)) == CONST_INT && ! SMALL_INT (XEXP (XEXP (x, 0), 1))) return 1; return 0; } /* Determine if a given RTX is a valid constant. We already know this satisfies CONSTANT_P. */ bool legitimate_constant_p (rtx x) { rtx inner; switch (GET_CODE (x)) { case SYMBOL_REF: /* TLS symbols are not constant. */ if (SYMBOL_REF_TLS_MODEL (x)) return false; break; case CONST: inner = XEXP (x, 0); /* Offsets of TLS symbols are never valid. Discourage CSE from creating them. */ if (GET_CODE (inner) == PLUS && tls_symbolic_operand (XEXP (inner, 0))) return false; break; case CONST_DOUBLE: if (GET_MODE (x) == VOIDmode) return true; /* Floating point constants are generally not ok. The only exception is 0.0 in VIS. */ if (TARGET_VIS && (GET_MODE (x) == SFmode || GET_MODE (x) == DFmode || GET_MODE (x) == TFmode) && fp_zero_operand (x, GET_MODE (x))) return true; return false; default: break; } return true; } /* Determine if a given RTX is a valid constant address. */ bool constant_address_p (rtx x) { switch (GET_CODE (x)) { case LABEL_REF: case CONST_INT: case HIGH: return true; case CONST: if (flag_pic && pic_address_needs_scratch (x)) return false; return legitimate_constant_p (x); case SYMBOL_REF: return !flag_pic && legitimate_constant_p (x); default: return false; } } /* Nonzero if the constant value X is a legitimate general operand when generating PIC code. It is given that flag_pic is on and that X satisfies CONSTANT_P or is a CONST_DOUBLE. */ bool legitimate_pic_operand_p (rtx x) { if (pic_address_needs_scratch (x)) return false; if (tls_symbolic_operand (x) || (GET_CODE (x) == CONST && GET_CODE (XEXP (x, 0)) == PLUS && tls_symbolic_operand (XEXP (XEXP (x, 0), 0)))) return false; return true; } /* Return nonzero if ADDR is a valid memory address. STRICT specifies whether strict register checking applies. */ int legitimate_address_p (enum machine_mode mode, rtx addr, int strict) { rtx rs1 = NULL, rs2 = NULL, imm1 = NULL, imm2; if (REG_P (addr) || GET_CODE (addr) == SUBREG) rs1 = addr; else if (GET_CODE (addr) == PLUS) { rs1 = XEXP (addr, 0); rs2 = XEXP (addr, 1); /* Canonicalize. REG comes first, if there are no regs, LO_SUM comes first. */ if (!REG_P (rs1) && GET_CODE (rs1) != SUBREG && (REG_P (rs2) || GET_CODE (rs2) == SUBREG || (GET_CODE (rs2) == LO_SUM && GET_CODE (rs1) != LO_SUM))) { rs1 = XEXP (addr, 1); rs2 = XEXP (addr, 0); } if ((flag_pic == 1 && rs1 == pic_offset_table_rtx && !REG_P (rs2) && GET_CODE (rs2) != SUBREG && GET_CODE (rs2) != LO_SUM && GET_CODE (rs2) != MEM && !tls_symbolic_operand (rs2) && (! symbolic_operand (rs2, VOIDmode) || mode == Pmode) && (GET_CODE (rs2) != CONST_INT || SMALL_INT (rs2))) || ((REG_P (rs1) || GET_CODE (rs1) == SUBREG) && RTX_OK_FOR_OFFSET_P (rs2))) { imm1 = rs2; rs2 = NULL; } else if ((REG_P (rs1) || GET_CODE (rs1) == SUBREG) && (REG_P (rs2) || GET_CODE (rs2) == SUBREG)) { /* We prohibit REG + REG for TFmode when there are no instructions which accept REG+REG instructions. We do this because REG+REG is not an offsetable address. If we get the situation in reload where source and destination of a movtf pattern are both MEMs with REG+REG address, then only one of them gets converted to an offsetable address. */ if (mode == TFmode && !(TARGET_FPU && TARGET_ARCH64 && TARGET_V9 && TARGET_HARD_QUAD)) return 0; /* We prohibit REG + REG on ARCH32 if not optimizing for DFmode/DImode because then mem_min_alignment is likely to be zero after reload and the forced split would lack a matching splitter pattern. */ if (TARGET_ARCH32 && !optimize && (mode == DFmode || mode == DImode)) return 0; } else if (USE_AS_OFFSETABLE_LO10 && GET_CODE (rs1) == LO_SUM && TARGET_ARCH64 && ! TARGET_CM_MEDMID && RTX_OK_FOR_OLO10_P (rs2)) { imm2 = rs2; rs2 = NULL; imm1 = XEXP (rs1, 1); rs1 = XEXP (rs1, 0); if (! CONSTANT_P (imm1) || tls_symbolic_operand (rs1)) return 0; } } else if (GET_CODE (addr) == LO_SUM) { rs1 = XEXP (addr, 0); imm1 = XEXP (addr, 1); if (! CONSTANT_P (imm1) || tls_symbolic_operand (rs1)) return 0; /* We can't allow TFmode, because an offset greater than or equal to the alignment (8) may cause the LO_SUM to overflow if !v9. */ if (mode == TFmode && !TARGET_V9) return 0; } else if (GET_CODE (addr) == CONST_INT && SMALL_INT (addr)) return 1; else return 0; if (GET_CODE (rs1) == SUBREG) rs1 = SUBREG_REG (rs1); if (!REG_P (rs1)) return 0; if (rs2) { if (GET_CODE (rs2) == SUBREG) rs2 = SUBREG_REG (rs2); if (!REG_P (rs2)) return 0; } if (strict) { if (!REGNO_OK_FOR_BASE_P (REGNO (rs1)) || (rs2 && !REGNO_OK_FOR_BASE_P (REGNO (rs2)))) return 0; } else { if ((REGNO (rs1) >= 32 && REGNO (rs1) != FRAME_POINTER_REGNUM && REGNO (rs1) < FIRST_PSEUDO_REGISTER) || (rs2 && (REGNO (rs2) >= 32 && REGNO (rs2) != FRAME_POINTER_REGNUM && REGNO (rs2) < FIRST_PSEUDO_REGISTER))) return 0; } return 1; } /* Construct the SYMBOL_REF for the tls_get_offset function. */ static GTY(()) rtx sparc_tls_symbol; static rtx sparc_tls_get_addr (void) { if (!sparc_tls_symbol) sparc_tls_symbol = gen_rtx_SYMBOL_REF (Pmode, "__tls_get_addr"); return sparc_tls_symbol; } static rtx sparc_tls_got (void) { rtx temp; if (flag_pic) { current_function_uses_pic_offset_table = 1; return pic_offset_table_rtx; } if (!global_offset_table) global_offset_table = gen_rtx_SYMBOL_REF (Pmode, "_GLOBAL_OFFSET_TABLE_"); temp = gen_reg_rtx (Pmode); emit_move_insn (temp, global_offset_table); return temp; } /* ADDR contains a thread-local SYMBOL_REF. Generate code to compute this (thread-local) address. */ rtx legitimize_tls_address (rtx addr) { rtx temp1, temp2, temp3, ret, o0, got, insn; if (no_new_pseudos) abort (); if (GET_CODE (addr) == SYMBOL_REF) switch (SYMBOL_REF_TLS_MODEL (addr)) { case TLS_MODEL_GLOBAL_DYNAMIC: start_sequence (); temp1 = gen_reg_rtx (SImode); temp2 = gen_reg_rtx (SImode); ret = gen_reg_rtx (Pmode); o0 = gen_rtx_REG (Pmode, 8); got = sparc_tls_got (); emit_insn (gen_tgd_hi22 (temp1, addr)); emit_insn (gen_tgd_lo10 (temp2, temp1, addr)); if (TARGET_ARCH32) { emit_insn (gen_tgd_add32 (o0, got, temp2, addr)); insn = emit_call_insn (gen_tgd_call32 (o0, sparc_tls_get_addr (), addr, const1_rtx)); } else { emit_insn (gen_tgd_add64 (o0, got, temp2, addr)); insn = emit_call_insn (gen_tgd_call64 (o0, sparc_tls_get_addr (), addr, const1_rtx)); } CALL_INSN_FUNCTION_USAGE (insn) = gen_rtx_EXPR_LIST (VOIDmode, gen_rtx_USE (VOIDmode, o0), CALL_INSN_FUNCTION_USAGE (insn)); insn = get_insns (); end_sequence (); emit_libcall_block (insn, ret, o0, addr); break; case TLS_MODEL_LOCAL_DYNAMIC: start_sequence (); temp1 = gen_reg_rtx (SImode); temp2 = gen_reg_rtx (SImode); temp3 = gen_reg_rtx (Pmode); ret = gen_reg_rtx (Pmode); o0 = gen_rtx_REG (Pmode, 8); got = sparc_tls_got (); emit_insn (gen_tldm_hi22 (temp1)); emit_insn (gen_tldm_lo10 (temp2, temp1)); if (TARGET_ARCH32) { emit_insn (gen_tldm_add32 (o0, got, temp2)); insn = emit_call_insn (gen_tldm_call32 (o0, sparc_tls_get_addr (), const1_rtx)); } else { emit_insn (gen_tldm_add64 (o0, got, temp2)); insn = emit_call_insn (gen_tldm_call64 (o0, sparc_tls_get_addr (), const1_rtx)); } CALL_INSN_FUNCTION_USAGE (insn) = gen_rtx_EXPR_LIST (VOIDmode, gen_rtx_USE (VOIDmode, o0), CALL_INSN_FUNCTION_USAGE (insn)); insn = get_insns (); end_sequence (); emit_libcall_block (insn, temp3, o0, gen_rtx_UNSPEC (Pmode, gen_rtvec (1, const0_rtx), UNSPEC_TLSLD_BASE)); temp1 = gen_reg_rtx (SImode); temp2 = gen_reg_rtx (SImode); emit_insn (gen_tldo_hix22 (temp1, addr)); emit_insn (gen_tldo_lox10 (temp2, temp1, addr)); if (TARGET_ARCH32) emit_insn (gen_tldo_add32 (ret, temp3, temp2, addr)); else emit_insn (gen_tldo_add64 (ret, temp3, temp2, addr)); break; case TLS_MODEL_INITIAL_EXEC: temp1 = gen_reg_rtx (SImode); temp2 = gen_reg_rtx (SImode); temp3 = gen_reg_rtx (Pmode); got = sparc_tls_got (); emit_insn (gen_tie_hi22 (temp1, addr)); emit_insn (gen_tie_lo10 (temp2, temp1, addr)); if (TARGET_ARCH32) emit_insn (gen_tie_ld32 (temp3, got, temp2, addr)); else emit_insn (gen_tie_ld64 (temp3, got, temp2, addr)); if (TARGET_SUN_TLS) { ret = gen_reg_rtx (Pmode); if (TARGET_ARCH32) emit_insn (gen_tie_add32 (ret, gen_rtx_REG (Pmode, 7), temp3, addr)); else emit_insn (gen_tie_add64 (ret, gen_rtx_REG (Pmode, 7), temp3, addr)); } else ret = gen_rtx_PLUS (Pmode, gen_rtx_REG (Pmode, 7), temp3); break; case TLS_MODEL_LOCAL_EXEC: temp1 = gen_reg_rtx (Pmode); temp2 = gen_reg_rtx (Pmode); if (TARGET_ARCH32) { emit_insn (gen_tle_hix22_sp32 (temp1, addr)); emit_insn (gen_tle_lox10_sp32 (temp2, temp1, addr)); } else { emit_insn (gen_tle_hix22_sp64 (temp1, addr)); emit_insn (gen_tle_lox10_sp64 (temp2, temp1, addr)); } ret = gen_rtx_PLUS (Pmode, gen_rtx_REG (Pmode, 7), temp2); break; default: abort (); } else abort (); /* for now ... */ return ret; } /* Legitimize PIC addresses. If the address is already position-independent, we return ORIG. Newly generated position-independent addresses go into a reg. This is REG if nonzero, otherwise we allocate register(s) as necessary. */ rtx legitimize_pic_address (rtx orig, enum machine_mode mode ATTRIBUTE_UNUSED, rtx reg) { if (GET_CODE (orig) == SYMBOL_REF) { rtx pic_ref, address; rtx insn; if (reg == 0) { if (reload_in_progress || reload_completed) abort (); else reg = gen_reg_rtx (Pmode); } if (flag_pic == 2) { /* If not during reload, allocate another temp reg here for loading in the address, so that these instructions can be optimized properly. */ rtx temp_reg = ((reload_in_progress || reload_completed) ? reg : gen_reg_rtx (Pmode)); /* Must put the SYMBOL_REF inside an UNSPEC here so that cse won't get confused into thinking that these two instructions are loading in the true address of the symbol. If in the future a PIC rtx exists, that should be used instead. */ if (Pmode == SImode) { emit_insn (gen_movsi_high_pic (temp_reg, orig)); emit_insn (gen_movsi_lo_sum_pic (temp_reg, temp_reg, orig)); } else { emit_insn (gen_movdi_high_pic (temp_reg, orig)); emit_insn (gen_movdi_lo_sum_pic (temp_reg, temp_reg, orig)); } address = temp_reg; } else address = orig; pic_ref = gen_const_mem (Pmode, gen_rtx_PLUS (Pmode, pic_offset_table_rtx, address)); current_function_uses_pic_offset_table = 1; insn = emit_move_insn (reg, pic_ref); /* Put a REG_EQUAL note on this insn, so that it can be optimized by loop. */ REG_NOTES (insn) = gen_rtx_EXPR_LIST (REG_EQUAL, orig, REG_NOTES (insn)); return reg; } else if (GET_CODE (orig) == CONST) { rtx base, offset; if (GET_CODE (XEXP (orig, 0)) == PLUS && XEXP (XEXP (orig, 0), 0) == pic_offset_table_rtx) return orig; if (reg == 0) { if (reload_in_progress || reload_completed) abort (); else reg = gen_reg_rtx (Pmode); } if (GET_CODE (XEXP (orig, 0)) == PLUS) { base = legitimize_pic_address (XEXP (XEXP (orig, 0), 0), Pmode, reg); offset = legitimize_pic_address (XEXP (XEXP (orig, 0), 1), Pmode, base == reg ? 0 : reg); } else abort (); if (GET_CODE (offset) == CONST_INT) { if (SMALL_INT (offset)) return plus_constant (base, INTVAL (offset)); else if (! reload_in_progress && ! reload_completed) offset = force_reg (Pmode, offset); else /* If we reach here, then something is seriously wrong. */ abort (); } return gen_rtx_PLUS (Pmode, base, offset); } else if (GET_CODE (orig) == LABEL_REF) /* ??? Why do we do this? */ /* Now movsi_pic_label_ref uses it, but we ought to be checking that the register is live instead, in case it is eliminated. */ current_function_uses_pic_offset_table = 1; return orig; } /* Try machine-dependent ways of modifying an illegitimate address X to be legitimate. If we find one, return the new, valid address. OLDX is the address as it was before break_out_memory_refs was called. In some cases it is useful to look at this to decide what needs to be done. MODE is the mode of the operand pointed to by X. */ rtx legitimize_address (rtx x, rtx oldx ATTRIBUTE_UNUSED, enum machine_mode mode) { rtx orig_x = x; if (GET_CODE (x) == PLUS && GET_CODE (XEXP (x, 0)) == MULT) x = gen_rtx_PLUS (Pmode, XEXP (x, 1), force_operand (XEXP (x, 0), NULL_RTX)); if (GET_CODE (x) == PLUS && GET_CODE (XEXP (x, 1)) == MULT) x = gen_rtx_PLUS (Pmode, XEXP (x, 0), force_operand (XEXP (x, 1), NULL_RTX)); if (GET_CODE (x) == PLUS && GET_CODE (XEXP (x, 0)) == PLUS) x = gen_rtx_PLUS (Pmode, force_operand (XEXP (x, 0), NULL_RTX), XEXP (x, 1)); if (GET_CODE (x) == PLUS && GET_CODE (XEXP (x, 1)) == PLUS) x = gen_rtx_PLUS (Pmode, XEXP (x, 0), force_operand (XEXP (x, 1), NULL_RTX)); if (x != orig_x && legitimate_address_p (mode, x, FALSE)) return x; if (tls_symbolic_operand (x)) x = legitimize_tls_address (x); else if (flag_pic) x = legitimize_pic_address (x, mode, 0); else if (GET_CODE (x) == PLUS && CONSTANT_ADDRESS_P (XEXP (x, 1))) x = gen_rtx_PLUS (Pmode, XEXP (x, 0), copy_to_mode_reg (Pmode, XEXP (x, 1))); else if (GET_CODE (x) == PLUS && CONSTANT_ADDRESS_P (XEXP (x, 0))) x = gen_rtx_PLUS (Pmode, XEXP (x, 1), copy_to_mode_reg (Pmode, XEXP (x, 0))); else if (GET_CODE (x) == SYMBOL_REF || GET_CODE (x) == CONST || GET_CODE (x) == LABEL_REF) x = copy_to_suggested_reg (x, NULL_RTX, Pmode); return x; } /* Emit the special PIC prologue. */ static void load_pic_register (void) { int orig_flag_pic = flag_pic; /* If we haven't emitted the special helper function, do so now. */ if (add_pc_to_pic_symbol_name[0] == 0) { const char *pic_name = reg_names[REGNO (pic_offset_table_rtx)]; int align; ASM_GENERATE_INTERNAL_LABEL (add_pc_to_pic_symbol_name, "LADDPC", 0); text_section (); align = floor_log2 (FUNCTION_BOUNDARY / BITS_PER_UNIT); if (align > 0) ASM_OUTPUT_ALIGN (asm_out_file, align); ASM_OUTPUT_LABEL (asm_out_file, add_pc_to_pic_symbol_name); if (flag_delayed_branch) fprintf (asm_out_file, "\tjmp %%o7+8\n\t add\t%%o7, %s, %s\n", pic_name, pic_name); else fprintf (asm_out_file, "\tadd\t%%o7, %s, %s\n\tjmp %%o7+8\n\t nop\n", pic_name, pic_name); } /* Initialize every time through, since we can't easily know this to be permanent. */ global_offset_table = gen_rtx_SYMBOL_REF (Pmode, "_GLOBAL_OFFSET_TABLE_"); add_pc_to_pic_symbol = gen_rtx_SYMBOL_REF (Pmode, add_pc_to_pic_symbol_name); flag_pic = 0; emit_insn (gen_load_pcrel_sym (pic_offset_table_rtx, global_offset_table, add_pc_to_pic_symbol)); flag_pic = orig_flag_pic; /* Need to emit this whether or not we obey regdecls, since setjmp/longjmp can cause life info to screw up. ??? In the case where we don't obey regdecls, this is not sufficient since we may not fall out the bottom. */ emit_insn (gen_rtx_USE (VOIDmode, pic_offset_table_rtx)); } /* Return 1 if RTX is a MEM which is known to be aligned to at least a DESIRED byte boundary. */ int mem_min_alignment (rtx mem, int desired) { rtx addr, base, offset; /* If it's not a MEM we can't accept it. */ if (GET_CODE (mem) != MEM) return 0; addr = XEXP (mem, 0); base = offset = NULL_RTX; if (GET_CODE (addr) == PLUS) { if (GET_CODE (XEXP (addr, 0)) == REG) { base = XEXP (addr, 0); /* What we are saying here is that if the base REG is aligned properly, the compiler will make sure any REG based index upon it will be so as well. */ if (GET_CODE (XEXP (addr, 1)) == CONST_INT) offset = XEXP (addr, 1); else offset = const0_rtx; } } else if (GET_CODE (addr) == REG) { base = addr; offset = const0_rtx; } if (base != NULL_RTX) { int regno = REGNO (base); if (regno != HARD_FRAME_POINTER_REGNUM && regno != STACK_POINTER_REGNUM) { /* Check if the compiler has recorded some information about the alignment of the base REG. If reload has completed, we already matched with proper alignments. If not running global_alloc, reload might give us unaligned pointer to local stack though. */ if (((cfun != 0 && REGNO_POINTER_ALIGN (regno) >= desired * BITS_PER_UNIT) || (optimize && reload_completed)) && (INTVAL (offset) & (desired - 1)) == 0) return 1; } else { if (((INTVAL (offset) - SPARC_STACK_BIAS) & (desired - 1)) == 0) return 1; } } else if (! TARGET_UNALIGNED_DOUBLES || CONSTANT_P (addr) || GET_CODE (addr) == LO_SUM) { /* Anything else we know is properly aligned unless TARGET_UNALIGNED_DOUBLES is true, in which case we can only assume that an access is aligned if it is to a constant address, or the address involves a LO_SUM. */ return 1; } /* An obviously unaligned address. */ return 0; } /* Vectors to keep interesting information about registers where it can easily be got. We used to use the actual mode value as the bit number, but there are more than 32 modes now. Instead we use two tables: one indexed by hard register number, and one indexed by mode. */ /* The purpose of sparc_mode_class is to shrink the range of modes so that they all fit (as bit numbers) in a 32 bit word (again). Each real mode is mapped into one sparc_mode_class mode. */ enum sparc_mode_class { S_MODE, D_MODE, T_MODE, O_MODE, SF_MODE, DF_MODE, TF_MODE, OF_MODE, CC_MODE, CCFP_MODE }; /* Modes for single-word and smaller quantities. */ #define S_MODES ((1 << (int) S_MODE) | (1 << (int) SF_MODE)) /* Modes for double-word and smaller quantities. */ #define D_MODES (S_MODES | (1 << (int) D_MODE) | (1 << DF_MODE)) /* Modes for quad-word and smaller quantities. */ #define T_MODES (D_MODES | (1 << (int) T_MODE) | (1 << (int) TF_MODE)) /* Modes for 8-word and smaller quantities. */ #define O_MODES (T_MODES | (1 << (int) O_MODE) | (1 << (int) OF_MODE)) /* Modes for single-float quantities. We must allow any single word or smaller quantity. This is because the fix/float conversion instructions take integer inputs/outputs from the float registers. */ #define SF_MODES (S_MODES) /* Modes for double-float and smaller quantities. */ #define DF_MODES (S_MODES | D_MODES) /* Modes for double-float only quantities. */ #define DF_MODES_NO_S ((1 << (int) D_MODE) | (1 << (int) DF_MODE)) /* Modes for quad-float only quantities. */ #define TF_ONLY_MODES (1 << (int) TF_MODE) /* Modes for quad-float and smaller quantities. */ #define TF_MODES (DF_MODES | TF_ONLY_MODES) /* Modes for quad-float and double-float quantities. */ #define TF_MODES_NO_S (DF_MODES_NO_S | TF_ONLY_MODES) /* Modes for quad-float pair only quantities. */ #define OF_ONLY_MODES (1 << (int) OF_MODE) /* Modes for quad-float pairs and smaller quantities. */ #define OF_MODES (TF_MODES | OF_ONLY_MODES) #define OF_MODES_NO_S (TF_MODES_NO_S | OF_ONLY_MODES) /* Modes for condition codes. */ #define CC_MODES (1 << (int) CC_MODE) #define CCFP_MODES (1 << (int) CCFP_MODE) /* Value is 1 if register/mode pair is acceptable on sparc. The funny mixture of D and T modes is because integer operations do not specially operate on tetra quantities, so non-quad-aligned registers can hold quadword quantities (except %o4 and %i4 because they cross fixed registers). */ /* This points to either the 32 bit or the 64 bit version. */ const int *hard_regno_mode_classes; static const int hard_32bit_mode_classes[] = { S_MODES, S_MODES, T_MODES, S_MODES, T_MODES, S_MODES, D_MODES, S_MODES, T_MODES, S_MODES, T_MODES, S_MODES, D_MODES, S_MODES, D_MODES, S_MODES, T_MODES, S_MODES, T_MODES, S_MODES, T_MODES, S_MODES, D_MODES, S_MODES, T_MODES, S_MODES, T_MODES, S_MODES, D_MODES, S_MODES, D_MODES, S_MODES, OF_MODES, SF_MODES, DF_MODES, SF_MODES, OF_MODES, SF_MODES, DF_MODES, SF_MODES, OF_MODES, SF_MODES, DF_MODES, SF_MODES, OF_MODES, SF_MODES, DF_MODES, SF_MODES, OF_MODES, SF_MODES, DF_MODES, SF_MODES, OF_MODES, SF_MODES, DF_MODES, SF_MODES, OF_MODES, SF_MODES, DF_MODES, SF_MODES, TF_MODES, SF_MODES, DF_MODES, SF_MODES, /* FP regs f32 to f63. Only the even numbered registers actually exist, and none can hold SFmode/SImode values. */ OF_MODES_NO_S, 0, DF_MODES_NO_S, 0, OF_MODES_NO_S, 0, DF_MODES_NO_S, 0, OF_MODES_NO_S, 0, DF_MODES_NO_S, 0, OF_MODES_NO_S, 0, DF_MODES_NO_S, 0, OF_MODES_NO_S, 0, DF_MODES_NO_S, 0, OF_MODES_NO_S, 0, DF_MODES_NO_S, 0, OF_MODES_NO_S, 0, DF_MODES_NO_S, 0, TF_MODES_NO_S, 0, DF_MODES_NO_S, 0, /* %fcc[0123] */ CCFP_MODES, CCFP_MODES, CCFP_MODES, CCFP_MODES, /* %icc */ CC_MODES }; static const int hard_64bit_mode_classes[] = { D_MODES, D_MODES, T_MODES, D_MODES, T_MODES, D_MODES, T_MODES, D_MODES, O_MODES, D_MODES, T_MODES, D_MODES, T_MODES, D_MODES, T_MODES, D_MODES, T_MODES, D_MODES, T_MODES, D_MODES, T_MODES, D_MODES, T_MODES, D_MODES, O_MODES, D_MODES, T_MODES, D_MODES, T_MODES, D_MODES, T_MODES, D_MODES, OF_MODES, SF_MODES, DF_MODES, SF_MODES, OF_MODES, SF_MODES, DF_MODES, SF_MODES, OF_MODES, SF_MODES, DF_MODES, SF_MODES, OF_MODES, SF_MODES, DF_MODES, SF_MODES, OF_MODES, SF_MODES, DF_MODES, SF_MODES, OF_MODES, SF_MODES, DF_MODES, SF_MODES, OF_MODES, SF_MODES, DF_MODES, SF_MODES, TF_MODES, SF_MODES, DF_MODES, SF_MODES, /* FP regs f32 to f63. Only the even numbered registers actually exist, and none can hold SFmode/SImode values. */ OF_MODES_NO_S, 0, DF_MODES_NO_S, 0, OF_MODES_NO_S, 0, DF_MODES_NO_S, 0, OF_MODES_NO_S, 0, DF_MODES_NO_S, 0, OF_MODES_NO_S, 0, DF_MODES_NO_S, 0, OF_MODES_NO_S, 0, DF_MODES_NO_S, 0, OF_MODES_NO_S, 0, DF_MODES_NO_S, 0, OF_MODES_NO_S, 0, DF_MODES_NO_S, 0, TF_MODES_NO_S, 0, DF_MODES_NO_S, 0, /* %fcc[0123] */ CCFP_MODES, CCFP_MODES, CCFP_MODES, CCFP_MODES, /* %icc */ CC_MODES }; int sparc_mode_class [NUM_MACHINE_MODES]; enum reg_class sparc_regno_reg_class[FIRST_PSEUDO_REGISTER]; static void sparc_init_modes (void) { int i; for (i = 0; i < NUM_MACHINE_MODES; i++) { switch (GET_MODE_CLASS (i)) { case MODE_INT: case MODE_PARTIAL_INT: case MODE_COMPLEX_INT: if (GET_MODE_SIZE (i) <= 4) sparc_mode_class[i] = 1 << (int) S_MODE; else if (GET_MODE_SIZE (i) == 8) sparc_mode_class[i] = 1 << (int) D_MODE; else if (GET_MODE_SIZE (i) == 16) sparc_mode_class[i] = 1 << (int) T_MODE; else if (GET_MODE_SIZE (i) == 32) sparc_mode_class[i] = 1 << (int) O_MODE; else sparc_mode_class[i] = 0; break; case MODE_FLOAT: case MODE_COMPLEX_FLOAT: if (GET_MODE_SIZE (i) <= 4) sparc_mode_class[i] = 1 << (int) SF_MODE; else if (GET_MODE_SIZE (i) == 8) sparc_mode_class[i] = 1 << (int) DF_MODE; else if (GET_MODE_SIZE (i) == 16) sparc_mode_class[i] = 1 << (int) TF_MODE; else if (GET_MODE_SIZE (i) == 32) sparc_mode_class[i] = 1 << (int) OF_MODE; else sparc_mode_class[i] = 0; break; case MODE_CC: if (i == (int) CCFPmode || i == (int) CCFPEmode) sparc_mode_class[i] = 1 << (int) CCFP_MODE; else sparc_mode_class[i] = 1 << (int) CC_MODE; break; default: sparc_mode_class[i] = 0; break; } } if (TARGET_ARCH64) hard_regno_mode_classes = hard_64bit_mode_classes; else hard_regno_mode_classes = hard_32bit_mode_classes; /* Initialize the array used by REGNO_REG_CLASS. */ for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) { if (i < 16 && TARGET_V8PLUS) sparc_regno_reg_class[i] = I64_REGS; else if (i < 32 || i == FRAME_POINTER_REGNUM) sparc_regno_reg_class[i] = GENERAL_REGS; else if (i < 64) sparc_regno_reg_class[i] = FP_REGS; else if (i < 96) sparc_regno_reg_class[i] = EXTRA_FP_REGS; else if (i < 100) sparc_regno_reg_class[i] = FPCC_REGS; else sparc_regno_reg_class[i] = NO_REGS; } } /* Compute the frame size required by the function. This function is called during the reload pass and also by sparc_expand_prologue. */ HOST_WIDE_INT sparc_compute_frame_size (HOST_WIDE_INT size, int leaf_function_p) { int outgoing_args_size = (current_function_outgoing_args_size + REG_PARM_STACK_SPACE (current_function_decl)); int n_regs = 0; /* N_REGS is the number of 4-byte regs saved thus far. */ int i; if (TARGET_ARCH64) { for (i = 0; i < 8; i++) if (regs_ever_live[i] && ! call_used_regs[i]) n_regs += 2; } else { for (i = 0; i < 8; i += 2) if ((regs_ever_live[i] && ! call_used_regs[i]) || (regs_ever_live[i+1] && ! call_used_regs[i+1])) n_regs += 2; } for (i = 32; i < (TARGET_V9 ? 96 : 64); i += 2) if ((regs_ever_live[i] && ! call_used_regs[i]) || (regs_ever_live[i+1] && ! call_used_regs[i+1])) n_regs += 2; /* Set up values for use in prologue and epilogue. */ num_gfregs = n_regs; if (leaf_function_p && n_regs == 0 && size == 0 && current_function_outgoing_args_size == 0) actual_fsize = apparent_fsize = 0; else { /* We subtract STARTING_FRAME_OFFSET, remember it's negative. */ apparent_fsize = (size - STARTING_FRAME_OFFSET + 7) & -8; apparent_fsize += n_regs * 4; actual_fsize = apparent_fsize + ((outgoing_args_size + 7) & -8); } /* Make sure nothing can clobber our register windows. If a SAVE must be done, or there is a stack-local variable, the register window area must be allocated. ??? For v8 we apparently need an additional 8 bytes of reserved space. */ if (! leaf_function_p || size > 0) actual_fsize += (16 * UNITS_PER_WORD) + (TARGET_ARCH64 ? 0 : 8); return SPARC_STACK_ALIGN (actual_fsize); } /* Output any necessary .register pseudo-ops. */ void sparc_output_scratch_registers (FILE *file ATTRIBUTE_UNUSED) { #ifdef HAVE_AS_REGISTER_PSEUDO_OP int i; if (TARGET_ARCH32) return; /* Check if %g[2367] were used without .register being printed for them already. */ for (i = 2; i < 8; i++) { if (regs_ever_live [i] && ! sparc_hard_reg_printed [i]) { sparc_hard_reg_printed [i] = 1; fprintf (file, "\t.register\t%%g%d, #scratch\n", i); } if (i == 3) i = 5; } #endif } /* Save/restore call-saved registers from LOW to HIGH at BASE+OFFSET as needed. LOW should be double-word aligned for 32-bit registers. Return the new OFFSET. */ #define SORR_SAVE 0 #define SORR_RESTORE 1 static int save_or_restore_regs (int low, int high, rtx base, int offset, int action) { rtx mem, insn; int i; if (TARGET_ARCH64 && high <= 32) { for (i = low; i < high; i++) { if (regs_ever_live[i] && ! call_used_regs[i]) { mem = gen_rtx_MEM (DImode, plus_constant (base, offset)); set_mem_alias_set (mem, sparc_sr_alias_set); if (action == SORR_SAVE) { insn = emit_move_insn (mem, gen_rtx_REG (DImode, i)); RTX_FRAME_RELATED_P (insn) = 1; } else /* action == SORR_RESTORE */ emit_move_insn (gen_rtx_REG (DImode, i), mem); offset += 8; } } } else { for (i = low; i < high; i += 2) { bool reg0 = regs_ever_live[i] && ! call_used_regs[i]; bool reg1 = regs_ever_live[i+1] && ! call_used_regs[i+1]; enum machine_mode mode; int regno; if (reg0 && reg1) { mode = i < 32 ? DImode : DFmode; regno = i; } else if (reg0) { mode = i < 32 ? SImode : SFmode; regno = i; } else if (reg1) { mode = i < 32 ? SImode : SFmode; regno = i + 1; offset += 4; } else continue; mem = gen_rtx_MEM (mode, plus_constant (base, offset)); set_mem_alias_set (mem, sparc_sr_alias_set); if (action == SORR_SAVE) { insn = emit_move_insn (mem, gen_rtx_REG (mode, regno)); RTX_FRAME_RELATED_P (insn) = 1; } else /* action == SORR_RESTORE */ emit_move_insn (gen_rtx_REG (mode, regno), mem); /* Always preserve double-word alignment. */ offset = (offset + 7) & -8; } } return offset; } /* Emit code to save call-saved registers. */ static void emit_save_regs (void) { HOST_WIDE_INT offset; rtx base; offset = frame_base_offset - apparent_fsize; if (offset < -4096 || offset + num_gfregs * 4 > 4096) { /* ??? This might be optimized a little as %g1 might already have a value close enough that a single add insn will do. */ /* ??? Although, all of this is probably only a temporary fix because if %g1 can hold a function result, then sparc_expand_epilogue will lose (the result will be clobbered). */ base = gen_rtx_REG (Pmode, 1); emit_move_insn (base, GEN_INT (offset)); emit_insn (gen_rtx_SET (VOIDmode, base, gen_rtx_PLUS (Pmode, frame_base_reg, base))); offset = 0; } else base = frame_base_reg; offset = save_or_restore_regs (0, 8, base, offset, SORR_SAVE); save_or_restore_regs (32, TARGET_V9 ? 96 : 64, base, offset, SORR_SAVE); } /* Emit code to restore call-saved registers. */ static void emit_restore_regs (void) { HOST_WIDE_INT offset; rtx base; offset = frame_base_offset - apparent_fsize; if (offset < -4096 || offset + num_gfregs * 4 > 4096 - 8 /*double*/) { base = gen_rtx_REG (Pmode, 1); emit_move_insn (base, GEN_INT (offset)); emit_insn (gen_rtx_SET (VOIDmode, base, gen_rtx_PLUS (Pmode, frame_base_reg, base))); offset = 0; } else base = frame_base_reg; offset = save_or_restore_regs (0, 8, base, offset, SORR_RESTORE); save_or_restore_regs (32, TARGET_V9 ? 96 : 64, base, offset, SORR_RESTORE); } /* Emit an increment for the stack pointer. */ static void emit_stack_pointer_increment (rtx increment) { if (TARGET_ARCH64) emit_insn (gen_adddi3 (stack_pointer_rtx, stack_pointer_rtx, increment)); else emit_insn (gen_addsi3 (stack_pointer_rtx, stack_pointer_rtx, increment)); } /* Emit a decrement for the stack pointer. */ static void emit_stack_pointer_decrement (rtx decrement) { if (TARGET_ARCH64) emit_insn (gen_subdi3 (stack_pointer_rtx, stack_pointer_rtx, decrement)); else emit_insn (gen_subsi3 (stack_pointer_rtx, stack_pointer_rtx, decrement)); } /* Expand the function prologue. The prologue is responsible for reserving storage for the frame, saving the call-saved registers and loading the PIC register if needed. */ void sparc_expand_prologue (void) { int leaf_function_p = current_function_uses_only_leaf_regs; /* Need to use actual_fsize, since we are also allocating space for our callee (and our own register save area). */ actual_fsize = sparc_compute_frame_size (get_frame_size(), leaf_function_p); if (leaf_function_p) { frame_base_reg = stack_pointer_rtx; frame_base_offset = actual_fsize + SPARC_STACK_BIAS; } else { frame_base_reg = hard_frame_pointer_rtx; frame_base_offset = SPARC_STACK_BIAS; } if (actual_fsize == 0) /* do nothing. */ ; else if (leaf_function_p) { if (actual_fsize <= 4096) emit_stack_pointer_increment (GEN_INT (- actual_fsize)); else if (actual_fsize <= 8192) { emit_stack_pointer_increment (GEN_INT (-4096)); emit_stack_pointer_increment (GEN_INT (4096 - actual_fsize)); } else { rtx reg = gen_rtx_REG (Pmode, 1); emit_move_insn (reg, GEN_INT (-actual_fsize)); emit_stack_pointer_increment (reg); } } else { if (actual_fsize <= 4096) emit_insn (gen_save_register_window (GEN_INT (-actual_fsize))); else if (actual_fsize <= 8192) { emit_insn (gen_save_register_window (GEN_INT (-4096))); emit_stack_pointer_increment (GEN_INT (4096 - actual_fsize)); } else { rtx reg = gen_rtx_REG (Pmode, 1); emit_move_insn (reg, GEN_INT (-actual_fsize)); emit_insn (gen_save_register_window (reg)); } } /* Call-saved registers are saved just above the outgoing argument area. */ if (num_gfregs) emit_save_regs (); /* Load the PIC register if needed. */ if (flag_pic && current_function_uses_pic_offset_table) load_pic_register (); } /* This function generates the assembly code for function entry, which boils down to emitting the necessary .register directives. It also informs the DWARF-2 back-end on the layout of the frame. ??? Historical cruft: "On SPARC, move-double insns between fpu and cpu need an 8-byte block of memory. If any fpu reg is used in the function, we allocate such a block here, at the bottom of the frame, just in case it's needed." Could this explain the -8 in emit_restore_regs? */ static void sparc_asm_function_prologue (FILE *file, HOST_WIDE_INT size ATTRIBUTE_UNUSED) { int leaf_function_p = current_function_uses_only_leaf_regs; sparc_output_scratch_registers (file); if (dwarf2out_do_frame () && actual_fsize) { char *label = dwarf2out_cfi_label (); /* The canonical frame address refers to the top of the frame. */ dwarf2out_def_cfa (label, leaf_function_p ? STACK_POINTER_REGNUM : HARD_FRAME_POINTER_REGNUM, frame_base_offset); if (! leaf_function_p) { /* Note the register window save. This tells the unwinder that it needs to restore the window registers from the previous frame's window save area at 0(cfa). */ dwarf2out_window_save (label); /* The return address (-8) is now in %i7. */ dwarf2out_return_reg (label, 31); } } } /* Expand the function epilogue, either normal or part of a sibcall. We emit all the instructions except the return or the call. */ void sparc_expand_epilogue (void) { int leaf_function_p = current_function_uses_only_leaf_regs; if (num_gfregs) emit_restore_regs (); if (actual_fsize == 0) /* do nothing. */ ; else if (leaf_function_p) { if (actual_fsize <= 4096) emit_stack_pointer_decrement (GEN_INT (- actual_fsize)); else if (actual_fsize <= 8192) { emit_stack_pointer_decrement (GEN_INT (-4096)); emit_stack_pointer_decrement (GEN_INT (4096 - actual_fsize)); } else { rtx reg = gen_rtx_REG (Pmode, 1); emit_move_insn (reg, GEN_INT (-actual_fsize)); emit_stack_pointer_decrement (reg); } } } /* This function generates the assembly code for function exit. */ static void sparc_asm_function_epilogue (FILE *file, HOST_WIDE_INT size ATTRIBUTE_UNUSED) { /* If code does not drop into the epilogue, we have to still output a dummy nop for the sake of sane backtraces. Otherwise, if the last two instructions of a function were "call foo; dslot;" this can make the return PC of foo (ie. address of call instruction plus 8) point to the first instruction in the next function. */ rtx insn, last_real_insn; insn = get_last_insn (); last_real_insn = prev_real_insn (insn); if (last_real_insn && GET_CODE (last_real_insn) == INSN && GET_CODE (PATTERN (last_real_insn)) == SEQUENCE) last_real_insn = XVECEXP (PATTERN (last_real_insn), 0, 0); if (last_real_insn && GET_CODE (last_real_insn) == CALL_INSN) fputs("\tnop\n", file); sparc_output_deferred_case_vectors (); } /* Output a 'restore' instruction. */ static void output_restore (rtx pat) { rtx operands[3]; if (! pat) { fputs ("\t restore\n", asm_out_file); return; } if (GET_CODE (pat) != SET) abort (); operands[0] = SET_DEST (pat); pat = SET_SRC (pat); switch (GET_CODE (pat)) { case PLUS: operands[1] = XEXP (pat, 0); operands[2] = XEXP (pat, 1); output_asm_insn (" restore %r1, %2, %Y0", operands); break; case LO_SUM: operands[1] = XEXP (pat, 0); operands[2] = XEXP (pat, 1); output_asm_insn (" restore %r1, %%lo(%a2), %Y0", operands); break; case ASHIFT: operands[1] = XEXP (pat, 0); if (XEXP (pat, 1) != const1_rtx) abort(); output_asm_insn (" restore %r1, %r1, %Y0", operands); break; default: operands[1] = pat; output_asm_insn (" restore %%g0, %1, %Y0", operands); break; } } /* Output a return. */ const char * output_return (rtx insn) { int leaf_function_p = current_function_uses_only_leaf_regs; bool delay_slot_filled_p = dbr_sequence_length () > 0; /* True if the caller has placed an "unimp" insn immediately after the call. This insn is used in the 32-bit ABI when calling a function that returns a non zero-sized structure. The 64-bit ABI doesn't have it. Be careful to have this test be the same as that used on the call. */ bool sparc_skip_caller_unimp = ! TARGET_ARCH64 && current_function_returns_struct && (TREE_CODE (DECL_SIZE (DECL_RESULT (current_function_decl))) == INTEGER_CST) && ! integer_zerop (DECL_SIZE (DECL_RESULT (current_function_decl))); if (leaf_function_p) { /* This is a leaf function so we don't have to bother restoring the register window, which frees us from dealing with the convoluted semantics of restore/return. We simply output the jump to the return address and the insn in the delay slot, which usually is the substraction restoring the stack pointer %sp. */ if (current_function_calls_eh_return) abort (); fprintf (asm_out_file, "\tjmp\t%%o7+%d\n", sparc_skip_caller_unimp ? 12 : 8); if (delay_slot_filled_p) { rtx delay = NEXT_INSN (insn); if (! delay) abort (); final_scan_insn (delay, asm_out_file, 1, 0, 1, NULL); PATTERN (delay) = gen_blockage (); INSN_CODE (delay) = -1; } else fputs ("\t nop\n", asm_out_file); } else { /* This is a regular function so we have to restore the register window. We may have a pending insn for the delay slot, which will be either combined with the 'restore' instruction or put in the delay slot of the 'return' instruction. */ if (current_function_calls_eh_return) { /* If the function uses __builtin_eh_return, the eh_return machinery occupies the delay slot. */ if (delay_slot_filled_p || sparc_skip_caller_unimp) abort (); if (! flag_delayed_branch) fputs ("\tadd\t%fp, %g1, %fp\n", asm_out_file); if (TARGET_V9) fputs ("\treturn\t%i7+8\n", asm_out_file); else fputs ("\trestore\n\tjmp\t%o7+8\n", asm_out_file); if (flag_delayed_branch) fputs ("\t add\t%sp, %g1, %sp\n", asm_out_file); else fputs ("\t nop\n", asm_out_file); } else if (delay_slot_filled_p) { rtx delay, pat; delay = NEXT_INSN (insn); if (! delay) abort (); pat = PATTERN (delay); if (TARGET_V9 && ! epilogue_renumber (&pat, 1)) { epilogue_renumber (&pat, 0); fprintf (asm_out_file, "\treturn\t%%i7+%d\n", sparc_skip_caller_unimp ? 12 : 8); final_scan_insn (delay, asm_out_file, 1, 0, 1, NULL); } else { fprintf (asm_out_file, "\tjmp\t%%i7+%d\n", sparc_skip_caller_unimp ? 12 : 8); output_restore (pat); } PATTERN (delay) = gen_blockage (); INSN_CODE (delay) = -1; } else { /* The delay slot is empty. */ if (TARGET_V9) fprintf (asm_out_file, "\treturn\t%%i7+%d\n\t nop\n", sparc_skip_caller_unimp ? 12 : 8); else if (flag_delayed_branch) fprintf (asm_out_file, "\tjmp\t%%i7+%d\n\t restore\n", sparc_skip_caller_unimp ? 12 : 8); else fprintf (asm_out_file, "\trestore\n\tjmp\t%%o7+%d\n\t nop\n", sparc_skip_caller_unimp ? 12 : 8); } } return ""; } /* Output a sibling call. */ const char * output_sibcall (rtx insn, rtx call_operand) { int leaf_function_p = current_function_uses_only_leaf_regs; bool delay_slot_filled_p = dbr_sequence_length () > 0; rtx operands[1]; if (! flag_delayed_branch) abort(); operands[0] = call_operand; if (leaf_function_p) { /* This is a leaf function so we don't have to bother restoring the register window. We simply output the jump to the function and the insn in the delay slot (if any). */ if (LEAF_SIBCALL_SLOT_RESERVED_P && delay_slot_filled_p) abort(); if (delay_slot_filled_p) { rtx delay = NEXT_INSN (insn); if (! delay) abort (); output_asm_insn ("sethi\t%%hi(%a0), %%g1", operands); output_asm_insn ("jmp\t%%g1 + %%lo(%a0)", operands); final_scan_insn (delay, asm_out_file, 1, 0, 1, NULL); PATTERN (delay) = gen_blockage (); INSN_CODE (delay) = -1; } else { /* Use or with rs2 %%g0 instead of mov, so that as/ld can optimize it into branch if possible. */ output_asm_insn ("or\t%%o7, %%g0, %%g1", operands); output_asm_insn ("call\t%a0, 0", operands); output_asm_insn (" or\t%%g1, %%g0, %%o7", operands); } } else { /* This is a regular function so we have to restore the register window. We may have a pending insn for the delay slot, which will be combined with the 'restore' instruction. */ output_asm_insn ("call\t%a0, 0", operands); if (delay_slot_filled_p) { rtx delay = NEXT_INSN (insn); if (! delay) abort (); output_restore (PATTERN (delay)); PATTERN (delay) = gen_blockage (); INSN_CODE (delay) = -1; } else output_restore (NULL_RTX); } return ""; } /* Functions for handling argument passing. For 32-bit, the first 6 args are normally in registers and the rest are pushed. Any arg that starts within the first 6 words is at least partially passed in a register unless its data type forbids. For 64-bit, the argument registers are laid out as an array of 16 elements and arguments are added sequentially. The first 6 int args and up to the first 16 fp args (depending on size) are passed in regs. Slot Stack Integral Float Float in structure Double Long Double ---- ----- -------- ----- ------------------ ------ ----------- 15 [SP+248] %f31 %f30,%f31 %d30 14 [SP+240] %f29 %f28,%f29 %d28 %q28 13 [SP+232] %f27 %f26,%f27 %d26 12 [SP+224] %f25 %f24,%f25 %d24 %q24 11 [SP+216] %f23 %f22,%f23 %d22 10 [SP+208] %f21 %f20,%f21 %d20 %q20 9 [SP+200] %f19 %f18,%f19 %d18 8 [SP+192] %f17 %f16,%f17 %d16 %q16 7 [SP+184] %f15 %f14,%f15 %d14 6 [SP+176] %f13 %f12,%f13 %d12 %q12 5 [SP+168] %o5 %f11 %f10,%f11 %d10 4 [SP+160] %o4 %f9 %f8,%f9 %d8 %q8 3 [SP+152] %o3 %f7 %f6,%f7 %d6 2 [SP+144] %o2 %f5 %f4,%f5 %d4 %q4 1 [SP+136] %o1 %f3 %f2,%f3 %d2 0 [SP+128] %o0 %f1 %f0,%f1 %d0 %q0 Here SP = %sp if -mno-stack-bias or %sp+stack_bias otherwise. Integral arguments are always passed as 64-bit quantities appropriately extended. Passing of floating point values is handled as follows. If a prototype is in scope: If the value is in a named argument (i.e. not a stdarg function or a value not part of the `...') then the value is passed in the appropriate fp reg. If the value is part of the `...' and is passed in one of the first 6 slots then the value is passed in the appropriate int reg. If the value is part of the `...' and is not passed in one of the first 6 slots then the value is passed in memory. If a prototype is not in scope: If the value is one of the first 6 arguments the value is passed in the appropriate integer reg and the appropriate fp reg. If the value is not one of the first 6 arguments the value is passed in the appropriate fp reg and in memory. Summary of the calling conventions implemented by GCC on SPARC: 32-bit ABI: size argument return value small integer <4 int. reg. int. reg. word 4 int. reg. int. reg. double word 8 int. reg. int. reg. _Complex small integer <8 int. reg. int. reg. _Complex word 8 int. reg. int. reg. _Complex double word 16 memory int. reg. vector integer <=8 int. reg. FP reg. vector integer >8 memory memory float 4 int. reg. FP reg. double 8 int. reg. FP reg. long double 16 memory memory _Complex float 8 memory FP reg. _Complex double 16 memory FP reg. _Complex long double 32 memory FP reg. vector float <=32 memory FP reg. vector float >32 memory memory aggregate any memory memory 64-bit ABI: size argument return value small integer <8 int. reg. int. reg. word 8 int. reg. int. reg. double word 16 int. reg. int. reg. _Complex small integer <16 int. reg. int. reg. _Complex word 16 int. reg. int. reg. _Complex double word 32 memory int. reg. vector integer <=16 FP reg. FP reg. vector integer 1632 memory memory float 4 FP reg. FP reg. double 8 FP reg. FP reg. long double 16 FP reg. FP reg. _Complex float 8 FP reg. FP reg. _Complex double 16 FP reg. FP reg. _Complex long double 32 memory FP reg. vector float <=16 FP reg. FP reg. vector float 1632 memory memory aggregate <=16 reg. reg. aggregate 1632 memory memory Note #1: complex floating-point types follow the extended SPARC ABIs as implemented by the Sun compiler. Note #2: integral vector types follow the scalar floating-point types conventions to match what is implemented by the Sun VIS SDK. Note #3: floating-point vector types follow the complex floating-point types conventions. */ /* Maximum number of int regs for args. */ #define SPARC_INT_ARG_MAX 6 /* Maximum number of fp regs for args. */ #define SPARC_FP_ARG_MAX 16 #define ROUND_ADVANCE(SIZE) (((SIZE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD) /* Handle the INIT_CUMULATIVE_ARGS macro. Initialize a variable CUM of type CUMULATIVE_ARGS for a call to a function whose data type is FNTYPE. For a library call, FNTYPE is 0. */ void init_cumulative_args (struct sparc_args *cum, tree fntype, rtx libname ATTRIBUTE_UNUSED, tree fndecl ATTRIBUTE_UNUSED) { cum->words = 0; cum->prototype_p = fntype && TYPE_ARG_TYPES (fntype); cum->libcall_p = fntype == 0; } /* Handle the TARGET_PROMOTE_PROTOTYPES target hook. When a prototype says `char' or `short', really pass an `int'. */ static bool sparc_promote_prototypes (tree fntype ATTRIBUTE_UNUSED) { return TARGET_ARCH32 ? true : false; } /* Handle the TARGET_STRICT_ARGUMENT_NAMING target hook. */ static bool sparc_strict_argument_naming (CUMULATIVE_ARGS *ca ATTRIBUTE_UNUSED) { return TARGET_ARCH64 ? true : false; } /* Scan the record type TYPE and return the following predicates: - INTREGS_P: the record contains at least one field or sub-field that is eligible for promotion in integer registers. - FP_REGS_P: the record contains at least one field or sub-field that is eligible for promotion in floating-point registers. - PACKED_P: the record contains at least one field that is packed. Sub-fields are not taken into account for the PACKED_P predicate. */ static void scan_record_type (tree type, int *intregs_p, int *fpregs_p, int *packed_p) { tree field; for (field = TYPE_FIELDS (type); field; field = TREE_CHAIN (field)) { if (TREE_CODE (field) == FIELD_DECL) { if (TREE_CODE (TREE_TYPE (field)) == RECORD_TYPE) scan_record_type (TREE_TYPE (field), intregs_p, fpregs_p, 0); else if (FLOAT_TYPE_P (TREE_TYPE (field)) && TARGET_FPU) *fpregs_p = 1; else *intregs_p = 1; if (packed_p && DECL_PACKED (field)) *packed_p = 1; } } } /* Compute the slot number to pass an argument in. Return the slot number or -1 if passing on the stack. CUM is a variable of type CUMULATIVE_ARGS which gives info about the preceding args and about the function being called. MODE is the argument's machine mode. TYPE is the data type of the argument (as a tree). This is null for libcalls where that information may not be available. NAMED is nonzero if this argument is a named parameter (otherwise it is an extra parameter matching an ellipsis). INCOMING_P is zero for FUNCTION_ARG, nonzero for FUNCTION_INCOMING_ARG. *PREGNO records the register number to use if scalar type. *PPADDING records the amount of padding needed in words. */ static int function_arg_slotno (const struct sparc_args *cum, enum machine_mode mode, tree type, int named, int incoming_p, int *pregno, int *ppadding) { int regbase = (incoming_p ? SPARC_INCOMING_INT_ARG_FIRST : SPARC_OUTGOING_INT_ARG_FIRST); int slotno = cum->words; int regno; *ppadding = 0; if (type && TREE_ADDRESSABLE (type)) return -1; if (TARGET_ARCH32 && mode == BLKmode && type && TYPE_ALIGN (type) % PARM_BOUNDARY != 0) return -1; /* For SPARC64, objects requiring 16-byte alignment get it. */ if (TARGET_ARCH64 && GET_MODE_ALIGNMENT (mode) >= 2 * BITS_PER_WORD && (slotno & 1) != 0) slotno++, *ppadding = 1; switch (GET_MODE_CLASS (mode)) { case MODE_FLOAT: case MODE_COMPLEX_FLOAT: case MODE_VECTOR_INT: case MODE_VECTOR_FLOAT: if (TARGET_ARCH64 && TARGET_FPU && named) { if (slotno >= SPARC_FP_ARG_MAX) return -1; regno = SPARC_FP_ARG_FIRST + slotno * 2; /* Arguments filling only one single FP register are right-justified in the outer double FP register. */ if (GET_MODE_SIZE (mode) <= 4) regno++; break; } /* fallthrough */ case MODE_INT: case MODE_COMPLEX_INT: if (slotno >= SPARC_INT_ARG_MAX) return -1; regno = regbase + slotno; break; case MODE_RANDOM: if (mode == VOIDmode) /* MODE is VOIDmode when generating the actual call. */ return -1; if (mode != BLKmode) abort (); /* For SPARC64, objects requiring 16-byte alignment get it. */ if (TARGET_ARCH64 && type && TYPE_ALIGN (type) >= 2 * BITS_PER_WORD && (slotno & 1) != 0) slotno++, *ppadding = 1; if (TARGET_ARCH32 || (type && TREE_CODE (type) == UNION_TYPE)) { if (slotno >= SPARC_INT_ARG_MAX) return -1; regno = regbase + slotno; } else /* TARGET_ARCH64 && type && TREE_CODE (type) == RECORD_TYPE */ { int intregs_p = 0, fpregs_p = 0, packed_p = 0; /* First see what kinds of registers we would need. */ scan_record_type (type, &intregs_p, &fpregs_p, &packed_p); /* The ABI obviously doesn't specify how packed structures are passed. These are defined to be passed in int regs if possible, otherwise memory. */ if (packed_p || !named) fpregs_p = 0, intregs_p = 1; /* If all arg slots are filled, then must pass on stack. */ if (fpregs_p && slotno >= SPARC_FP_ARG_MAX) return -1; /* If there are only int args and all int arg slots are filled, then must pass on stack. */ if (!fpregs_p && intregs_p && slotno >= SPARC_INT_ARG_MAX) return -1; /* Note that even if all int arg slots are filled, fp members may still be passed in regs if such regs are available. *PREGNO isn't set because there may be more than one, it's up to the caller to compute them. */ return slotno; } break; default : abort (); } *pregno = regno; return slotno; } /* Handle recursive register counting for structure field layout. */ struct function_arg_record_value_parms { rtx ret; /* return expression being built. */ int slotno; /* slot number of the argument. */ int named; /* whether the argument is named. */ int regbase; /* regno of the base register. */ int stack; /* 1 if part of the argument is on the stack. */ int intoffset; /* offset of the first pending integer field. */ unsigned int nregs; /* number of words passed in registers. */ }; static void function_arg_record_value_3 (HOST_WIDE_INT, struct function_arg_record_value_parms *); static void function_arg_record_value_2 (tree, HOST_WIDE_INT, struct function_arg_record_value_parms *, bool); static void function_arg_record_value_1 (tree, HOST_WIDE_INT, struct function_arg_record_value_parms *, bool); static rtx function_arg_record_value (tree, enum machine_mode, int, int, int); static rtx function_arg_union_value (int, enum machine_mode, int); /* A subroutine of function_arg_record_value. Traverse the structure recursively and determine how many registers will be required. */ static void function_arg_record_value_1 (tree type, HOST_WIDE_INT startbitpos, struct function_arg_record_value_parms *parms, bool packed_p) { tree field; /* We need to compute how many registers are needed so we can allocate the PARALLEL but before we can do that we need to know whether there are any packed fields. The ABI obviously doesn't specify how structures are passed in this case, so they are defined to be passed in int regs if possible, otherwise memory, regardless of whether there are fp values present. */ if (! packed_p) for (field = TYPE_FIELDS (type); field; field = TREE_CHAIN (field)) { if (TREE_CODE (field) == FIELD_DECL && DECL_PACKED (field)) { packed_p = true; break; } } /* Compute how many registers we need. */ for (field = TYPE_FIELDS (type); field; field = TREE_CHAIN (field)) { if (TREE_CODE (field) == FIELD_DECL) { HOST_WIDE_INT bitpos = startbitpos; if (DECL_SIZE (field) != 0 && host_integerp (bit_position (field), 1)) bitpos += int_bit_position (field); /* ??? FIXME: else assume zero offset. */ if (TREE_CODE (TREE_TYPE (field)) == RECORD_TYPE) function_arg_record_value_1 (TREE_TYPE (field), bitpos, parms, packed_p); else if ((FLOAT_TYPE_P (TREE_TYPE (field)) || TREE_CODE (TREE_TYPE (field)) == VECTOR_TYPE) && TARGET_FPU && parms->named && ! packed_p) { if (parms->intoffset != -1) { unsigned int startbit, endbit; int intslots, this_slotno; startbit = parms->intoffset & -BITS_PER_WORD; endbit = (bitpos + BITS_PER_WORD - 1) & -BITS_PER_WORD; intslots = (endbit - startbit) / BITS_PER_WORD; this_slotno = parms->slotno + parms->intoffset / BITS_PER_WORD; if (intslots > 0 && intslots > SPARC_INT_ARG_MAX - this_slotno) { intslots = MAX (0, SPARC_INT_ARG_MAX - this_slotno); /* We need to pass this field on the stack. */ parms->stack = 1; } parms->nregs += intslots; parms->intoffset = -1; } /* There's no need to check this_slotno < SPARC_FP_ARG MAX. If it wasn't true we wouldn't be here. */ parms->nregs += 1; if (TREE_CODE (TREE_TYPE (field)) == COMPLEX_TYPE) parms->nregs += 1; } else { if (parms->intoffset == -1) parms->intoffset = bitpos; } } } } /* A subroutine of function_arg_record_value. Assign the bits of the structure between parms->intoffset and bitpos to integer registers. */ static void function_arg_record_value_3 (HOST_WIDE_INT bitpos, struct function_arg_record_value_parms *parms) { enum machine_mode mode; unsigned int regno; unsigned int startbit, endbit; int this_slotno, intslots, intoffset; rtx reg; if (parms->intoffset == -1) return; intoffset = parms->intoffset; parms->intoffset = -1; startbit = intoffset & -BITS_PER_WORD; endbit = (bitpos + BITS_PER_WORD - 1) & -BITS_PER_WORD; intslots = (endbit - startbit) / BITS_PER_WORD; this_slotno = parms->slotno + intoffset / BITS_PER_WORD; intslots = MIN (intslots, SPARC_INT_ARG_MAX - this_slotno); if (intslots <= 0) return; /* If this is the trailing part of a word, only load that much into the register. Otherwise load the whole register. Note that in the latter case we may pick up unwanted bits. It's not a problem at the moment but may wish to revisit. */ if (intoffset % BITS_PER_WORD != 0) mode = mode_for_size (BITS_PER_WORD - intoffset % BITS_PER_WORD, MODE_INT, 0); else mode = word_mode; intoffset /= BITS_PER_UNIT; do { regno = parms->regbase + this_slotno; reg = gen_rtx_REG (mode, regno); XVECEXP (parms->ret, 0, parms->stack + parms->nregs) = gen_rtx_EXPR_LIST (VOIDmode, reg, GEN_INT (intoffset)); this_slotno += 1; intoffset = (intoffset | (UNITS_PER_WORD-1)) + 1; mode = word_mode; parms->nregs += 1; intslots -= 1; } while (intslots > 0); } /* A subroutine of function_arg_record_value. Traverse the structure recursively and assign bits to floating point registers. Track which bits in between need integer registers; invoke function_arg_record_value_3 to make that happen. */ static void function_arg_record_value_2 (tree type, HOST_WIDE_INT startbitpos, struct function_arg_record_value_parms *parms, bool packed_p) { tree field; if (! packed_p) for (field = TYPE_FIELDS (type); field; field = TREE_CHAIN (field)) { if (TREE_CODE (field) == FIELD_DECL && DECL_PACKED (field)) { packed_p = true; break; } } for (field = TYPE_FIELDS (type); field; field = TREE_CHAIN (field)) { if (TREE_CODE (field) == FIELD_DECL) { HOST_WIDE_INT bitpos = startbitpos; if (DECL_SIZE (field) != 0 && host_integerp (bit_position (field), 1)) bitpos += int_bit_position (field); /* ??? FIXME: else assume zero offset. */ if (TREE_CODE (TREE_TYPE (field)) == RECORD_TYPE) function_arg_record_value_2 (TREE_TYPE (field), bitpos, parms, packed_p); else if ((FLOAT_TYPE_P (TREE_TYPE (field)) || TREE_CODE (TREE_TYPE (field)) == VECTOR_TYPE) && TARGET_FPU && parms->named && ! packed_p) { int this_slotno = parms->slotno + bitpos / BITS_PER_WORD; int regno; enum machine_mode mode = DECL_MODE (field); rtx reg; function_arg_record_value_3 (bitpos, parms); switch (mode) { case SCmode: mode = SFmode; break; case DCmode: mode = DFmode; break; case TCmode: mode = TFmode; break; default: break; } regno = SPARC_FP_ARG_FIRST + this_slotno * 2; if (GET_MODE_SIZE (mode) <= 4 && (bitpos & 32) != 0) regno++; reg = gen_rtx_REG (mode, regno); XVECEXP (parms->ret, 0, parms->stack + parms->nregs) = gen_rtx_EXPR_LIST (VOIDmode, reg, GEN_INT (bitpos / BITS_PER_UNIT)); parms->nregs += 1; if (TREE_CODE (TREE_TYPE (field)) == COMPLEX_TYPE) { regno += GET_MODE_SIZE (mode) / 4; reg = gen_rtx_REG (mode, regno); XVECEXP (parms->ret, 0, parms->stack + parms->nregs) = gen_rtx_EXPR_LIST (VOIDmode, reg, GEN_INT ((bitpos + GET_MODE_BITSIZE (mode)) / BITS_PER_UNIT)); parms->nregs += 1; } } else { if (parms->intoffset == -1) parms->intoffset = bitpos; } } } } /* Used by function_arg and function_value to implement the complex conventions of the 64-bit ABI for passing and returning structures. Return an expression valid as a return value for the two macros FUNCTION_ARG and FUNCTION_VALUE. TYPE is the data type of the argument (as a tree). This is null for libcalls where that information may not be available. MODE is the argument's machine mode. SLOTNO is the index number of the argument's slot in the parameter array. NAMED is nonzero if this argument is a named parameter (otherwise it is an extra parameter matching an ellipsis). REGBASE is the regno of the base register for the parameter array. */ static rtx function_arg_record_value (tree type, enum machine_mode mode, int slotno, int named, int regbase) { HOST_WIDE_INT typesize = int_size_in_bytes (type); struct function_arg_record_value_parms parms; unsigned int nregs; parms.ret = NULL_RTX; parms.slotno = slotno; parms.named = named; parms.regbase = regbase; parms.stack = 0; /* Compute how many registers we need. */ parms.nregs = 0; parms.intoffset = 0; function_arg_record_value_1 (type, 0, &parms, false); /* Take into account pending integer fields. */ if (parms.intoffset != -1) { unsigned int startbit, endbit; int intslots, this_slotno; startbit = parms.intoffset & -BITS_PER_WORD; endbit = (typesize*BITS_PER_UNIT + BITS_PER_WORD - 1) & -BITS_PER_WORD; intslots = (endbit - startbit) / BITS_PER_WORD; this_slotno = slotno + parms.intoffset / BITS_PER_WORD; if (intslots > 0 && intslots > SPARC_INT_ARG_MAX - this_slotno) { intslots = MAX (0, SPARC_INT_ARG_MAX - this_slotno); /* We need to pass this field on the stack. */ parms.stack = 1; } parms.nregs += intslots; } nregs = parms.nregs; /* Allocate the vector and handle some annoying special cases. */ if (nregs == 0) { /* ??? Empty structure has no value? Duh? */ if (typesize <= 0) { /* Though there's nothing really to store, return a word register anyway so the rest of gcc doesn't go nuts. Returning a PARALLEL leads to breakage due to the fact that there are zero bytes to load. */ return gen_rtx_REG (mode, regbase); } else { /* ??? C++ has structures with no fields, and yet a size. Give up for now and pass everything back in integer registers. */ nregs = (typesize + UNITS_PER_WORD - 1) / UNITS_PER_WORD; } if (nregs + slotno > SPARC_INT_ARG_MAX) nregs = SPARC_INT_ARG_MAX - slotno; } if (nregs == 0) abort (); parms.ret = gen_rtx_PARALLEL (mode, rtvec_alloc (parms.stack + nregs)); /* If at least one field must be passed on the stack, generate (parallel [(expr_list (nil) ...) ...]) so that all fields will also be passed on the stack. We can't do much better because the semantics of FUNCTION_ARG_PARTIAL_NREGS doesn't handle the case of structures for which the fields passed exclusively in registers are not at the beginning of the structure. */ if (parms.stack) XVECEXP (parms.ret, 0, 0) = gen_rtx_EXPR_LIST (VOIDmode, NULL_RTX, const0_rtx); /* Fill in the entries. */ parms.nregs = 0; parms.intoffset = 0; function_arg_record_value_2 (type, 0, &parms, false); function_arg_record_value_3 (typesize * BITS_PER_UNIT, &parms); if (parms.nregs != nregs) abort (); return parms.ret; } /* Used by function_arg and function_value to implement the conventions of the 64-bit ABI for passing and returning unions. Return an expression valid as a return value for the two macros FUNCTION_ARG and FUNCTION_VALUE. SIZE is the size in bytes of the union. MODE is the argument's machine mode. REGNO is the hard register the union will be passed in. */ static rtx function_arg_union_value (int size, enum machine_mode mode, int regno) { int nwords = ROUND_ADVANCE (size), i; rtx regs; /* Unions are passed left-justified. */ regs = gen_rtx_PARALLEL (mode, rtvec_alloc (nwords)); for (i = 0; i < nwords; i++) XVECEXP (regs, 0, i) = gen_rtx_EXPR_LIST (VOIDmode, gen_rtx_REG (word_mode, regno + i), GEN_INT (UNITS_PER_WORD * i)); return regs; } /* Handle the FUNCTION_ARG macro. Determine where to put an argument to a function. Value is zero to push the argument on the stack, or a hard register in which to store the argument. CUM is a variable of type CUMULATIVE_ARGS which gives info about the preceding args and about the function being called. MODE is the argument's machine mode. TYPE is the data type of the argument (as a tree). This is null for libcalls where that information may not be available. NAMED is nonzero if this argument is a named parameter (otherwise it is an extra parameter matching an ellipsis). INCOMING_P is zero for FUNCTION_ARG, nonzero for FUNCTION_INCOMING_ARG. */ rtx function_arg (const struct sparc_args *cum, enum machine_mode mode, tree type, int named, int incoming_p) { int regbase = (incoming_p ? SPARC_INCOMING_INT_ARG_FIRST : SPARC_OUTGOING_INT_ARG_FIRST); int slotno, regno, padding; rtx reg; slotno = function_arg_slotno (cum, mode, type, named, incoming_p, ®no, &padding); if (slotno == -1) return 0; if (TARGET_ARCH32) { reg = gen_rtx_REG (mode, regno); return reg; } if (type && TREE_CODE (type) == RECORD_TYPE) { /* Structures up to 16 bytes in size are passed in arg slots on the stack and are promoted to registers where possible. */ if (int_size_in_bytes (type) > 16) abort (); /* shouldn't get here */ return function_arg_record_value (type, mode, slotno, named, regbase); } else if (type && TREE_CODE (type) == UNION_TYPE) { HOST_WIDE_INT size = int_size_in_bytes (type); if (size > 16) abort (); /* shouldn't get here */ return function_arg_union_value (size, mode, regno); } /* v9 fp args in reg slots beyond the int reg slots get passed in regs but also have the slot allocated for them. If no prototype is in scope fp values in register slots get passed in two places, either fp regs and int regs or fp regs and memory. */ else if ((GET_MODE_CLASS (mode) == MODE_FLOAT || GET_MODE_CLASS (mode) == MODE_COMPLEX_FLOAT || GET_MODE_CLASS (mode) == MODE_VECTOR_INT || GET_MODE_CLASS (mode) == MODE_VECTOR_FLOAT) && SPARC_FP_REG_P (regno)) { reg = gen_rtx_REG (mode, regno); if (cum->prototype_p || cum->libcall_p) { /* "* 2" because fp reg numbers are recorded in 4 byte quantities. */ #if 0 /* ??? This will cause the value to be passed in the fp reg and in the stack. When a prototype exists we want to pass the value in the reg but reserve space on the stack. That's an optimization, and is deferred [for a bit]. */ if ((regno - SPARC_FP_ARG_FIRST) >= SPARC_INT_ARG_MAX * 2) return gen_rtx_PARALLEL (mode, gen_rtvec (2, gen_rtx_EXPR_LIST (VOIDmode, NULL_RTX, const0_rtx), gen_rtx_EXPR_LIST (VOIDmode, reg, const0_rtx))); else #else /* ??? It seems that passing back a register even when past the area declared by REG_PARM_STACK_SPACE will allocate space appropriately, and will not copy the data onto the stack, exactly as we desire. This is due to locate_and_pad_parm being called in expand_call whenever reg_parm_stack_space > 0, which while beneficial to our example here, would seem to be in error from what had been intended. Ho hum... -- r~ */ #endif return reg; } else { rtx v0, v1; if ((regno - SPARC_FP_ARG_FIRST) < SPARC_INT_ARG_MAX * 2) { int intreg; /* On incoming, we don't need to know that the value is passed in %f0 and %i0, and it confuses other parts causing needless spillage even on the simplest cases. */ if (incoming_p) return reg; intreg = (SPARC_OUTGOING_INT_ARG_FIRST + (regno - SPARC_FP_ARG_FIRST) / 2); v0 = gen_rtx_EXPR_LIST (VOIDmode, reg, const0_rtx); v1 = gen_rtx_EXPR_LIST (VOIDmode, gen_rtx_REG (mode, intreg), const0_rtx); return gen_rtx_PARALLEL (mode, gen_rtvec (2, v0, v1)); } else { v0 = gen_rtx_EXPR_LIST (VOIDmode, NULL_RTX, const0_rtx); v1 = gen_rtx_EXPR_LIST (VOIDmode, reg, const0_rtx); return gen_rtx_PARALLEL (mode, gen_rtvec (2, v0, v1)); } } } else { /* Scalar or complex int. */ reg = gen_rtx_REG (mode, regno); } return reg; } /* Handle the FUNCTION_ARG_PARTIAL_NREGS macro. For an arg passed partly in registers and partly in memory, this is the number of registers used. For args passed entirely in registers or entirely in memory, zero. Any arg that starts in the first 6 regs but won't entirely fit in them needs partial registers on v8. On v9, structures with integer values in arg slots 5,6 will be passed in %o5 and SP+176, and complex fp values that begin in the last fp reg [where "last fp reg" varies with the mode] will be split between that reg and memory. */ int function_arg_partial_nregs (const struct sparc_args *cum, enum machine_mode mode, tree type, int named) { int slotno, regno, padding; /* We pass 0 for incoming_p here, it doesn't matter. */ slotno = function_arg_slotno (cum, mode, type, named, 0, ®no, &padding); if (slotno == -1) return 0; if (TARGET_ARCH32) { if ((slotno + (mode == BLKmode ? ROUND_ADVANCE (int_size_in_bytes (type)) : ROUND_ADVANCE (GET_MODE_SIZE (mode)))) > SPARC_INT_ARG_MAX) return SPARC_INT_ARG_MAX - slotno; } else { /* We are guaranteed by pass_by_reference that the size of the argument is not greater than 16 bytes, so we only need to return 1 if the argument is partially passed in registers. */ if (type && AGGREGATE_TYPE_P (type)) { int size = int_size_in_bytes (type); if (size > UNITS_PER_WORD && slotno == SPARC_INT_ARG_MAX - 1) return 1; } else if (GET_MODE_CLASS (mode) == MODE_COMPLEX_INT || (GET_MODE_CLASS (mode) == MODE_COMPLEX_FLOAT && ! (TARGET_FPU && named))) { /* The complex types are passed as packed types. */ if (GET_MODE_SIZE (mode) > UNITS_PER_WORD && slotno == SPARC_INT_ARG_MAX - 1) return 1; } else if (GET_MODE_CLASS (mode) == MODE_COMPLEX_FLOAT) { if ((slotno + GET_MODE_SIZE (mode) / UNITS_PER_WORD) > SPARC_FP_ARG_MAX) return 1; } } return 0; } /* Return true if the argument should be passed by reference. !v9: The SPARC ABI stipulates passing struct arguments (of any size) and quad-precision floats by invisible reference. v9: Aggregates greater than 16 bytes are passed by reference. For Pascal, also pass arrays by reference. */ static bool sparc_pass_by_reference (CUMULATIVE_ARGS *cum ATTRIBUTE_UNUSED, enum machine_mode mode, tree type, bool named ATTRIBUTE_UNUSED) { if (TARGET_ARCH32) { return ((type && AGGREGATE_TYPE_P (type)) /* Extended ABI (as implemented by the Sun compiler) says that all complex floats are passed in memory. */ || mode == SCmode /* Enforce the 2-word cap for passing arguments in registers. This affects CDImode, TFmode, DCmode, TCmode and large vector modes. */ || GET_MODE_SIZE (mode) > 8); } else { return ((type && TREE_CODE (type) == ARRAY_TYPE) || (type && AGGREGATE_TYPE_P (type) && (unsigned HOST_WIDE_INT) int_size_in_bytes (type) > 16) /* Enforce the 2-word cap for passing arguments in registers. This affects CTImode, TCmode and large vector modes. */ || GET_MODE_SIZE (mode) > 16); } } /* Handle the FUNCTION_ARG_ADVANCE macro. Update the data in CUM to advance over an argument of mode MODE and data type TYPE. TYPE is null for libcalls where that information may not be available. */ void function_arg_advance (struct sparc_args *cum, enum machine_mode mode, tree type, int named) { int slotno, regno, padding; /* We pass 0 for incoming_p here, it doesn't matter. */ slotno = function_arg_slotno (cum, mode, type, named, 0, ®no, &padding); /* If register required leading padding, add it. */ if (slotno != -1) cum->words += padding; if (TARGET_ARCH32) { cum->words += (mode != BLKmode ? ROUND_ADVANCE (GET_MODE_SIZE (mode)) : ROUND_ADVANCE (int_size_in_bytes (type))); } else { if (type && AGGREGATE_TYPE_P (type)) { int size = int_size_in_bytes (type); if (size <= 8) ++cum->words; else if (size <= 16) cum->words += 2; else /* passed by reference */ ++cum->words; } else { cum->words += (mode != BLKmode ? ROUND_ADVANCE (GET_MODE_SIZE (mode)) : ROUND_ADVANCE (int_size_in_bytes (type))); } } } /* Handle the FUNCTION_ARG_PADDING macro. For the 64 bit ABI structs are always stored left shifted in their argument slot. */ enum direction function_arg_padding (enum machine_mode mode, tree type) { if (TARGET_ARCH64 && type != 0 && AGGREGATE_TYPE_P (type)) return upward; /* Fall back to the default. */ return DEFAULT_FUNCTION_ARG_PADDING (mode, type); } /* Handle the TARGET_RETURN_IN_MEMORY target hook. Specify whether to return the return value in memory. */ static bool sparc_return_in_memory (tree type, tree fntype ATTRIBUTE_UNUSED) { if (TARGET_ARCH32) /* Original SPARC 32-bit ABI says that quad-precision floats and all structures are returned in memory. Extended ABI (as implemented by the Sun compiler) says that all complex floats are returned in registers (8 FP registers at most for '_Complex long double'). Return all complex integers in registers (4 at most for '_Complex long long'). */ return (TYPE_MODE (type) == BLKmode || TYPE_MODE (type) == TFmode /* Integral vector types follow the scalar FP types conventions. */ || (GET_MODE_CLASS (TYPE_MODE (type)) == MODE_VECTOR_INT && GET_MODE_SIZE (TYPE_MODE (type)) > 8) /* FP vector types follow the complex FP types conventions. */ || (GET_MODE_CLASS (TYPE_MODE (type)) == MODE_VECTOR_FLOAT && GET_MODE_SIZE (TYPE_MODE (type)) > 32)); else /* Original SPARC 64-bit ABI says that structures and unions smaller than 32 bytes are returned in registers. Extended ABI (as implemented by the Sun compiler) says that all complex floats are returned in registers (8 FP registers at most for '_Complex long double'). Return all complex integers in registers (4 at most for '_Complex TItype'). */ return ((TYPE_MODE (type) == BLKmode && (unsigned HOST_WIDE_INT) int_size_in_bytes (type) > 32) || GET_MODE_SIZE (TYPE_MODE (type)) > 32); } /* Handle the TARGET_STRUCT_VALUE target hook. Return where to find the structure return value address. */ static rtx sparc_struct_value_rtx (tree fndecl ATTRIBUTE_UNUSED, int incoming) { if (TARGET_ARCH64) return 0; else { if (incoming) return gen_rtx_MEM (Pmode, plus_constant (frame_pointer_rtx, STRUCT_VALUE_OFFSET)); else return gen_rtx_MEM (Pmode, plus_constant (stack_pointer_rtx, STRUCT_VALUE_OFFSET)); } } /* Handle FUNCTION_VALUE, FUNCTION_OUTGOING_VALUE, and LIBCALL_VALUE macros. For v9, function return values are subject to the same rules as arguments, except that up to 32 bytes may be returned in registers. */ rtx function_value (tree type, enum machine_mode mode, int incoming_p) { /* Beware that the two values are swapped here wrt function_arg. */ int regbase = (incoming_p ? SPARC_OUTGOING_INT_ARG_FIRST : SPARC_INCOMING_INT_ARG_FIRST); int regno; if (TARGET_ARCH64 && type) { if (TREE_CODE (type) == RECORD_TYPE) { /* Structures up to 32 bytes in size are passed in registers, promoted to fp registers where possible. */ if (int_size_in_bytes (type) > 32) abort (); /* shouldn't get here */ return function_arg_record_value (type, mode, 0, 1, regbase); } else if (TREE_CODE (type) == UNION_TYPE) { HOST_WIDE_INT size = int_size_in_bytes (type); if (size > 32) abort (); /* shouldn't get here */ return function_arg_union_value (size, mode, regbase); } else if (AGGREGATE_TYPE_P (type)) { /* All other aggregate types are passed in an integer register in a mode corresponding to the size of the type. */ HOST_WIDE_INT bytes = int_size_in_bytes (type); if (bytes > 32) abort (); /* shouldn't get here */ mode = mode_for_size (bytes * BITS_PER_UNIT, MODE_INT, 0); /* ??? We probably should have made the same ABI change in 3.4.0 as the one we made for unions. The latter was required by the SCD though, while the former is not specified, so we favored compatibility and efficiency. Now we're stuck for aggregates larger than 16 bytes, because OImode vanished in the meantime. Let's not try to be unduly clever, and simply follow the ABI for unions in that case. */ if (mode == BLKmode) return function_arg_union_value (bytes, mode, regbase); } else if (GET_MODE_CLASS (mode) == MODE_INT && GET_MODE_SIZE (mode) < UNITS_PER_WORD) mode = word_mode; } if (TARGET_FPU && (FLOAT_MODE_P (mode) || VECTOR_MODE_P (mode))) regno = SPARC_FP_ARG_FIRST; else regno = regbase; return gen_rtx_REG (mode, regno); } /* Do what is necessary for `va_start'. We look at the current function to determine if stdarg or varargs is used and return the address of the first unnamed parameter. */ static rtx sparc_builtin_saveregs (void) { int first_reg = current_function_args_info.words; rtx address; int regno; for (regno = first_reg; regno < SPARC_INT_ARG_MAX; regno++) emit_move_insn (gen_rtx_MEM (word_mode, gen_rtx_PLUS (Pmode, frame_pointer_rtx, GEN_INT (FIRST_PARM_OFFSET (0) + (UNITS_PER_WORD * regno)))), gen_rtx_REG (word_mode, SPARC_INCOMING_INT_ARG_FIRST + regno)); address = gen_rtx_PLUS (Pmode, frame_pointer_rtx, GEN_INT (FIRST_PARM_OFFSET (0) + UNITS_PER_WORD * first_reg)); return address; } /* Implement `va_start' for stdarg. */ void sparc_va_start (tree valist, rtx nextarg) { nextarg = expand_builtin_saveregs (); std_expand_builtin_va_start (valist, nextarg); } /* Implement `va_arg' for stdarg. */ static tree sparc_gimplify_va_arg (tree valist, tree type, tree *pre_p, tree *post_p) { HOST_WIDE_INT size, rsize, align; tree addr, incr; bool indirect; tree ptrtype = build_pointer_type (type); if (pass_by_reference (NULL, TYPE_MODE (type), type, 0)) { indirect = true; size = rsize = UNITS_PER_WORD; align = 0; } else { indirect = false; size = int_size_in_bytes (type); rsize = (size + UNITS_PER_WORD - 1) & -UNITS_PER_WORD; align = 0; if (TARGET_ARCH64) { /* For SPARC64, objects requiring 16-byte alignment get it. */ if (TYPE_ALIGN (type) >= 2 * (unsigned) BITS_PER_WORD) align = 2 * UNITS_PER_WORD; /* SPARC-V9 ABI states that structures up to 16 bytes in size are given whole slots as needed. */ if (AGGREGATE_TYPE_P (type)) { if (size == 0) size = rsize = UNITS_PER_WORD; else size = rsize; } } } incr = valist; if (align) { incr = fold (build2 (PLUS_EXPR, ptr_type_node, incr, ssize_int (align - 1))); incr = fold (build2 (BIT_AND_EXPR, ptr_type_node, incr, ssize_int (-align))); } gimplify_expr (&incr, pre_p, post_p, is_gimple_val, fb_rvalue); addr = incr; if (BYTES_BIG_ENDIAN && size < rsize) addr = fold (build2 (PLUS_EXPR, ptr_type_node, incr, ssize_int (rsize - size))); if (indirect) { addr = fold_convert (build_pointer_type (ptrtype), addr); addr = build_fold_indirect_ref (addr); } /* If the address isn't aligned properly for the type, we may need to copy to a temporary. FIXME: This is inefficient. Usually we can do this in registers. */ else if (align == 0 && TYPE_ALIGN (type) > BITS_PER_WORD) { tree tmp = create_tmp_var (type, "va_arg_tmp"); tree dest_addr = build_fold_addr_expr (tmp); tree copy = build_function_call_expr (implicit_built_in_decls[BUILT_IN_MEMCPY], tree_cons (NULL_TREE, dest_addr, tree_cons (NULL_TREE, addr, tree_cons (NULL_TREE, size_int (rsize), NULL_TREE)))); gimplify_and_add (copy, pre_p); addr = dest_addr; } else addr = fold_convert (ptrtype, addr); incr = fold (build2 (PLUS_EXPR, ptr_type_node, incr, ssize_int (rsize))); incr = build2 (MODIFY_EXPR, ptr_type_node, valist, incr); gimplify_and_add (incr, post_p); return build_fold_indirect_ref (addr); } /* Return the string to output an unconditional branch to LABEL, which is the operand number of the label. DEST is the destination insn (i.e. the label), INSN is the source. */ const char * output_ubranch (rtx dest, int label, rtx insn) { static char string[64]; bool noop = false; char *p; /* TurboSPARC is reported to have problems with with foo: b,a foo i.e. an empty loop with the annul bit set. The workaround is to use foo: b foo; nop instead. */ if (! TARGET_V9 && flag_delayed_branch && (INSN_ADDRESSES (INSN_UID (dest)) == INSN_ADDRESSES (INSN_UID (insn)))) { strcpy (string, "b\t"); noop = true; } else { bool v9_form = false; if (TARGET_V9 && INSN_ADDRESSES_SET_P ()) { int delta = (INSN_ADDRESSES (INSN_UID (dest)) - INSN_ADDRESSES (INSN_UID (insn))); /* Leave some instructions for "slop". */ if (delta >= -260000 && delta < 260000) v9_form = true; } if (v9_form) strcpy (string, "ba%*,pt\t%%xcc, "); else strcpy (string, "b%*\t"); } p = strchr (string, '\0'); *p++ = '%'; *p++ = 'l'; *p++ = '0' + label; *p++ = '%'; if (noop) *p++ = '#'; else *p++ = '('; *p = '\0'; return string; } /* Return the string to output a conditional branch to LABEL, which is the operand number of the label. OP is the conditional expression. XEXP (OP, 0) is assumed to be a condition code register (integer or floating point) and its mode specifies what kind of comparison we made. DEST is the destination insn (i.e. the label), INSN is the source. REVERSED is nonzero if we should reverse the sense of the comparison. ANNUL is nonzero if we should generate an annulling branch. NOOP is nonzero if we have to follow this branch by a noop. */ const char * output_cbranch (rtx op, rtx dest, int label, int reversed, int annul, int noop, rtx insn) { static char string[64]; enum rtx_code code = GET_CODE (op); rtx cc_reg = XEXP (op, 0); enum machine_mode mode = GET_MODE (cc_reg); const char *labelno, *branch; int spaces = 8, far; char *p; /* v9 branches are limited to +-1MB. If it is too far away, change bne,pt %xcc, .LC30 to be,pn %xcc, .+12 nop ba .LC30 and fbne,a,pn %fcc2, .LC29 to fbe,pt %fcc2, .+16 nop ba .LC29 */ far = TARGET_V9 && (get_attr_length (insn) >= 3); if (reversed ^ far) { /* Reversal of FP compares takes care -- an ordered compare becomes an unordered compare and vice versa. */ if (mode == CCFPmode || mode == CCFPEmode) code = reverse_condition_maybe_unordered (code); else code = reverse_condition (code); } /* Start by writing the branch condition. */ if (mode == CCFPmode || mode == CCFPEmode) { switch (code) { case NE: branch = "fbne"; break; case EQ: branch = "fbe"; break; case GE: branch = "fbge"; break; case GT: branch = "fbg"; break; case LE: branch = "fble"; break; case LT: branch = "fbl"; break; case UNORDERED: branch = "fbu"; break; case ORDERED: branch = "fbo"; break; case UNGT: branch = "fbug"; break; case UNLT: branch = "fbul"; break; case UNEQ: branch = "fbue"; break; case UNGE: branch = "fbuge"; break; case UNLE: branch = "fbule"; break; case LTGT: branch = "fblg"; break; default: abort (); } /* ??? !v9: FP branches cannot be preceded by another floating point insn. Because there is currently no concept of pre-delay slots, we can fix this only by always emitting a nop before a floating point branch. */ string[0] = '\0'; if (! TARGET_V9) strcpy (string, "nop\n\t"); strcat (string, branch); } else { switch (code) { case NE: branch = "bne"; break; case EQ: branch = "be"; break; case GE: if (mode == CC_NOOVmode || mode == CCX_NOOVmode) branch = "bpos"; else branch = "bge"; break; case GT: branch = "bg"; break; case LE: branch = "ble"; break; case LT: if (mode == CC_NOOVmode || mode == CCX_NOOVmode) branch = "bneg"; else branch = "bl"; break; case GEU: branch = "bgeu"; break; case GTU: branch = "bgu"; break; case LEU: branch = "bleu"; break; case LTU: branch = "blu"; break; default: abort (); } strcpy (string, branch); } spaces -= strlen (branch); p = strchr (string, '\0'); /* Now add the annulling, the label, and a possible noop. */ if (annul && ! far) { strcpy (p, ",a"); p += 2; spaces -= 2; } if (TARGET_V9) { rtx note; int v8 = 0; if (! far && insn && INSN_ADDRESSES_SET_P ()) { int delta = (INSN_ADDRESSES (INSN_UID (dest)) - INSN_ADDRESSES (INSN_UID (insn))); /* Leave some instructions for "slop". */ if (delta < -260000 || delta >= 260000) v8 = 1; } if (mode == CCFPmode || mode == CCFPEmode) { static char v9_fcc_labelno[] = "%%fccX, "; /* Set the char indicating the number of the fcc reg to use. */ v9_fcc_labelno[5] = REGNO (cc_reg) - SPARC_FIRST_V9_FCC_REG + '0'; labelno = v9_fcc_labelno; if (v8) { if (REGNO (cc_reg) == SPARC_FCC_REG) labelno = ""; else abort (); } } else if (mode == CCXmode || mode == CCX_NOOVmode) { labelno = "%%xcc, "; if (v8) abort (); } else { labelno = "%%icc, "; if (v8) labelno = ""; } if (*labelno && insn && (note = find_reg_note (insn, REG_BR_PROB, NULL_RTX))) { strcpy (p, ((INTVAL (XEXP (note, 0)) >= REG_BR_PROB_BASE / 2) ^ far) ? ",pt" : ",pn"); p += 3; spaces -= 3; } } else labelno = ""; if (spaces > 0) *p++ = '\t'; else *p++ = ' '; strcpy (p, labelno); p = strchr (p, '\0'); if (far) { strcpy (p, ".+12\n\t nop\n\tb\t"); if (annul || noop) p[3] = '6'; p += 14; } *p++ = '%'; *p++ = 'l'; /* Set the char indicating the number of the operand containing the label_ref. */ *p++ = label + '0'; *p = '\0'; if (noop) strcpy (p, "\n\t nop"); return string; } /* Emit a library call comparison between floating point X and Y. COMPARISON is the rtl operator to compare with (EQ, NE, GT, etc.). TARGET_ARCH64 uses _Qp_* functions, which use pointers to TFmode values as arguments instead of the TFmode registers themselves, that's why we cannot call emit_float_lib_cmp. */ void sparc_emit_float_lib_cmp (rtx x, rtx y, enum rtx_code comparison) { const char *qpfunc; rtx slot0, slot1, result, tem, tem2; enum machine_mode mode; switch (comparison) { case EQ: qpfunc = (TARGET_ARCH64) ? "_Qp_feq" : "_Q_feq"; break; case NE: qpfunc = (TARGET_ARCH64) ? "_Qp_fne" : "_Q_fne"; break; case GT: qpfunc = (TARGET_ARCH64) ? "_Qp_fgt" : "_Q_fgt"; break; case GE: qpfunc = (TARGET_ARCH64) ? "_Qp_fge" : "_Q_fge"; break; case LT: qpfunc = (TARGET_ARCH64) ? "_Qp_flt" : "_Q_flt"; break; case LE: qpfunc = (TARGET_ARCH64) ? "_Qp_fle" : "_Q_fle"; break; case ORDERED: case UNORDERED: case UNGT: case UNLT: case UNEQ: case UNGE: case UNLE: case LTGT: qpfunc = (TARGET_ARCH64) ? "_Qp_cmp" : "_Q_cmp"; break; default: abort(); break; } if (TARGET_ARCH64) { if (GET_CODE (x) != MEM) { slot0 = assign_stack_temp (TFmode, GET_MODE_SIZE(TFmode), 0); emit_insn (gen_rtx_SET (VOIDmode, slot0, x)); } else slot0 = x; if (GET_CODE (y) != MEM) { slot1 = assign_stack_temp (TFmode, GET_MODE_SIZE(TFmode), 0); emit_insn (gen_rtx_SET (VOIDmode, slot1, y)); } else slot1 = y; emit_library_call (gen_rtx_SYMBOL_REF (Pmode, qpfunc), LCT_NORMAL, DImode, 2, XEXP (slot0, 0), Pmode, XEXP (slot1, 0), Pmode); mode = DImode; } else { emit_library_call (gen_rtx_SYMBOL_REF (Pmode, qpfunc), LCT_NORMAL, SImode, 2, x, TFmode, y, TFmode); mode = SImode; } /* Immediately move the result of the libcall into a pseudo register so reload doesn't clobber the value if it needs the return register for a spill reg. */ result = gen_reg_rtx (mode); emit_move_insn (result, hard_libcall_value (mode)); switch (comparison) { default: emit_cmp_insn (result, const0_rtx, NE, NULL_RTX, mode, 0); break; case ORDERED: case UNORDERED: emit_cmp_insn (result, GEN_INT(3), comparison == UNORDERED ? EQ : NE, NULL_RTX, mode, 0); break; case UNGT: case UNGE: emit_cmp_insn (result, const1_rtx, comparison == UNGT ? GT : NE, NULL_RTX, mode, 0); break; case UNLE: emit_cmp_insn (result, const2_rtx, NE, NULL_RTX, mode, 0); break; case UNLT: tem = gen_reg_rtx (mode); if (TARGET_ARCH32) emit_insn (gen_andsi3 (tem, result, const1_rtx)); else emit_insn (gen_anddi3 (tem, result, const1_rtx)); emit_cmp_insn (tem, const0_rtx, NE, NULL_RTX, mode, 0); break; case UNEQ: case LTGT: tem = gen_reg_rtx (mode); if (TARGET_ARCH32) emit_insn (gen_addsi3 (tem, result, const1_rtx)); else emit_insn (gen_adddi3 (tem, result, const1_rtx)); tem2 = gen_reg_rtx (mode); if (TARGET_ARCH32) emit_insn (gen_andsi3 (tem2, tem, const2_rtx)); else emit_insn (gen_anddi3 (tem2, tem, const2_rtx)); emit_cmp_insn (tem2, const0_rtx, comparison == UNEQ ? EQ : NE, NULL_RTX, mode, 0); break; } } /* Generate an unsigned DImode to FP conversion. This is the same code optabs would emit if we didn't have TFmode patterns. */ void sparc_emit_floatunsdi (rtx *operands, enum machine_mode mode) { rtx neglab, donelab, i0, i1, f0, in, out; out = operands[0]; in = force_reg (DImode, operands[1]); neglab = gen_label_rtx (); donelab = gen_label_rtx (); i0 = gen_reg_rtx (DImode); i1 = gen_reg_rtx (DImode); f0 = gen_reg_rtx (mode); emit_cmp_and_jump_insns (in, const0_rtx, LT, const0_rtx, DImode, 0, neglab); emit_insn (gen_rtx_SET (VOIDmode, out, gen_rtx_FLOAT (mode, in))); emit_jump_insn (gen_jump (donelab)); emit_barrier (); emit_label (neglab); emit_insn (gen_lshrdi3 (i0, in, const1_rtx)); emit_insn (gen_anddi3 (i1, in, const1_rtx)); emit_insn (gen_iordi3 (i0, i0, i1)); emit_insn (gen_rtx_SET (VOIDmode, f0, gen_rtx_FLOAT (mode, i0))); emit_insn (gen_rtx_SET (VOIDmode, out, gen_rtx_PLUS (mode, f0, f0))); emit_label (donelab); } /* Generate an FP to unsigned DImode conversion. This is the same code optabs would emit if we didn't have TFmode patterns. */ void sparc_emit_fixunsdi (rtx *operands, enum machine_mode mode) { rtx neglab, donelab, i0, i1, f0, in, out, limit; out = operands[0]; in = force_reg (mode, operands[1]); neglab = gen_label_rtx (); donelab = gen_label_rtx (); i0 = gen_reg_rtx (DImode); i1 = gen_reg_rtx (DImode); limit = gen_reg_rtx (mode); f0 = gen_reg_rtx (mode); emit_move_insn (limit, CONST_DOUBLE_FROM_REAL_VALUE ( REAL_VALUE_ATOF ("9223372036854775808.0", mode), mode)); emit_cmp_and_jump_insns (in, limit, GE, NULL_RTX, mode, 0, neglab); emit_insn (gen_rtx_SET (VOIDmode, out, gen_rtx_FIX (DImode, gen_rtx_FIX (mode, in)))); emit_jump_insn (gen_jump (donelab)); emit_barrier (); emit_label (neglab); emit_insn (gen_rtx_SET (VOIDmode, f0, gen_rtx_MINUS (mode, in, limit))); emit_insn (gen_rtx_SET (VOIDmode, i0, gen_rtx_FIX (DImode, gen_rtx_FIX (mode, f0)))); emit_insn (gen_movdi (i1, const1_rtx)); emit_insn (gen_ashldi3 (i1, i1, GEN_INT (63))); emit_insn (gen_xordi3 (out, i0, i1)); emit_label (donelab); } /* Return the string to output a conditional branch to LABEL, testing register REG. LABEL is the operand number of the label; REG is the operand number of the reg. OP is the conditional expression. The mode of REG says what kind of comparison we made. DEST is the destination insn (i.e. the label), INSN is the source. REVERSED is nonzero if we should reverse the sense of the comparison. ANNUL is nonzero if we should generate an annulling branch. NOOP is nonzero if we have to follow this branch by a noop. */ const char * output_v9branch (rtx op, rtx dest, int reg, int label, int reversed, int annul, int noop, rtx insn) { static char string[64]; enum rtx_code code = GET_CODE (op); enum machine_mode mode = GET_MODE (XEXP (op, 0)); rtx note; int far; char *p; /* branch on register are limited to +-128KB. If it is too far away, change brnz,pt %g1, .LC30 to brz,pn %g1, .+12 nop ba,pt %xcc, .LC30 and brgez,a,pn %o1, .LC29 to brlz,pt %o1, .+16 nop ba,pt %xcc, .LC29 */ far = get_attr_length (insn) >= 3; /* If not floating-point or if EQ or NE, we can just reverse the code. */ if (reversed ^ far) code = reverse_condition (code); /* Only 64 bit versions of these instructions exist. */ if (mode != DImode) abort (); /* Start by writing the branch condition. */ switch (code) { case NE: strcpy (string, "brnz"); break; case EQ: strcpy (string, "brz"); break; case GE: strcpy (string, "brgez"); break; case LT: strcpy (string, "brlz"); break; case LE: strcpy (string, "brlez"); break; case GT: strcpy (string, "brgz"); break; default: abort (); } p = strchr (string, '\0'); /* Now add the annulling, reg, label, and nop. */ if (annul && ! far) { strcpy (p, ",a"); p += 2; } if (insn && (note = find_reg_note (insn, REG_BR_PROB, NULL_RTX))) { strcpy (p, ((INTVAL (XEXP (note, 0)) >= REG_BR_PROB_BASE / 2) ^ far) ? ",pt" : ",pn"); p += 3; } *p = p < string + 8 ? '\t' : ' '; p++; *p++ = '%'; *p++ = '0' + reg; *p++ = ','; *p++ = ' '; if (far) { int veryfar = 1, delta; if (INSN_ADDRESSES_SET_P ()) { delta = (INSN_ADDRESSES (INSN_UID (dest)) - INSN_ADDRESSES (INSN_UID (insn))); /* Leave some instructions for "slop". */ if (delta >= -260000 && delta < 260000) veryfar = 0; } strcpy (p, ".+12\n\t nop\n\t"); if (annul || noop) p[3] = '6'; p += 12; if (veryfar) { strcpy (p, "b\t"); p += 2; } else { strcpy (p, "ba,pt\t%%xcc, "); p += 13; } } *p++ = '%'; *p++ = 'l'; *p++ = '0' + label; *p = '\0'; if (noop) strcpy (p, "\n\t nop"); return string; } /* Return 1, if any of the registers of the instruction are %l[0-7] or %o[0-7]. Such instructions cannot be used in the delay slot of return insn on v9. If TEST is 0, also rename all %i[0-7] registers to their %o[0-7] counterparts. */ static int epilogue_renumber (register rtx *where, int test) { register const char *fmt; register int i; register enum rtx_code code; if (*where == 0) return 0; code = GET_CODE (*where); switch (code) { case REG: if (REGNO (*where) >= 8 && REGNO (*where) < 24) /* oX or lX */ return 1; if (! test && REGNO (*where) >= 24 && REGNO (*where) < 32) *where = gen_rtx_REG (GET_MODE (*where), OUTGOING_REGNO (REGNO(*where))); case SCRATCH: case CC0: case PC: case CONST_INT: case CONST_DOUBLE: return 0; /* Do not replace the frame pointer with the stack pointer because it can cause the delayed instruction to load below the stack. This occurs when instructions like: (set (reg/i:SI 24 %i0) (mem/f:SI (plus:SI (reg/f:SI 30 %fp) (const_int -20 [0xffffffec])) 0)) are in the return delayed slot. */ case PLUS: if (GET_CODE (XEXP (*where, 0)) == REG && REGNO (XEXP (*where, 0)) == HARD_FRAME_POINTER_REGNUM && (GET_CODE (XEXP (*where, 1)) != CONST_INT || INTVAL (XEXP (*where, 1)) < SPARC_STACK_BIAS)) return 1; break; case MEM: if (SPARC_STACK_BIAS && GET_CODE (XEXP (*where, 0)) == REG && REGNO (XEXP (*where, 0)) == HARD_FRAME_POINTER_REGNUM) return 1; break; default: break; } fmt = GET_RTX_FORMAT (code); for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) { if (fmt[i] == 'E') { register int j; for (j = XVECLEN (*where, i) - 1; j >= 0; j--) if (epilogue_renumber (&(XVECEXP (*where, i, j)), test)) return 1; } else if (fmt[i] == 'e' && epilogue_renumber (&(XEXP (*where, i)), test)) return 1; } return 0; } /* Leaf functions and non-leaf functions have different needs. */ static const int reg_leaf_alloc_order[] = REG_LEAF_ALLOC_ORDER; static const int reg_nonleaf_alloc_order[] = REG_ALLOC_ORDER; static const int *const reg_alloc_orders[] = { reg_leaf_alloc_order, reg_nonleaf_alloc_order}; void order_regs_for_local_alloc (void) { static int last_order_nonleaf = 1; if (regs_ever_live[15] != last_order_nonleaf) { last_order_nonleaf = !last_order_nonleaf; memcpy ((char *) reg_alloc_order, (const char *) reg_alloc_orders[last_order_nonleaf], FIRST_PSEUDO_REGISTER * sizeof (int)); } } /* Return 1 if REG and MEM are legitimate enough to allow the various mem<-->reg splits to be run. */ int sparc_splitdi_legitimate (rtx reg, rtx mem) { /* Punt if we are here by mistake. */ if (! reload_completed) abort (); /* We must have an offsettable memory reference. */ if (! offsettable_memref_p (mem)) return 0; /* If we have legitimate args for ldd/std, we do not want the split to happen. */ if ((REGNO (reg) % 2) == 0 && mem_min_alignment (mem, 8)) return 0; /* Success. */ return 1; } /* Return 1 if x and y are some kind of REG and they refer to different hard registers. This test is guaranteed to be run after reload. */ int sparc_absnegfloat_split_legitimate (rtx x, rtx y) { if (GET_CODE (x) != REG) return 0; if (GET_CODE (y) != REG) return 0; if (REGNO (x) == REGNO (y)) return 0; return 1; } /* Return 1 if REGNO (reg1) is even and REGNO (reg1) == REGNO (reg2) - 1. This makes them candidates for using ldd and std insns. Note reg1 and reg2 *must* be hard registers. */ int registers_ok_for_ldd_peep (rtx reg1, rtx reg2) { /* We might have been passed a SUBREG. */ if (GET_CODE (reg1) != REG || GET_CODE (reg2) != REG) return 0; if (REGNO (reg1) % 2 != 0) return 0; /* Integer ldd is deprecated in SPARC V9 */ if (TARGET_V9 && REGNO (reg1) < 32) return 0; return (REGNO (reg1) == REGNO (reg2) - 1); } /* Return 1 if the addresses in mem1 and mem2 are suitable for use in an ldd or std insn. This can only happen when addr1 and addr2, the addresses in mem1 and mem2, are consecutive memory locations (addr1 + 4 == addr2). addr1 must also be aligned on a 64-bit boundary. Also iff dependent_reg_rtx is not null it should not be used to compute the address for mem1, i.e. we cannot optimize a sequence like: ld [%o0], %o0 ld [%o0 + 4], %o1 to ldd [%o0], %o0 nor: ld [%g3 + 4], %g3 ld [%g3], %g2 to ldd [%g3], %g2 But, note that the transformation from: ld [%g2 + 4], %g3 ld [%g2], %g2 to ldd [%g2], %g2 is perfectly fine. Thus, the peephole2 patterns always pass us the destination register of the first load, never the second one. For stores we don't have a similar problem, so dependent_reg_rtx is NULL_RTX. */ int mems_ok_for_ldd_peep (rtx mem1, rtx mem2, rtx dependent_reg_rtx) { rtx addr1, addr2; unsigned int reg1; HOST_WIDE_INT offset1; /* The mems cannot be volatile. */ if (MEM_VOLATILE_P (mem1) || MEM_VOLATILE_P (mem2)) return 0; /* MEM1 should be aligned on a 64-bit boundary. */ if (MEM_ALIGN (mem1) < 64) return 0; addr1 = XEXP (mem1, 0); addr2 = XEXP (mem2, 0); /* Extract a register number and offset (if used) from the first addr. */ if (GET_CODE (addr1) == PLUS) { /* If not a REG, return zero. */ if (GET_CODE (XEXP (addr1, 0)) != REG) return 0; else { reg1 = REGNO (XEXP (addr1, 0)); /* The offset must be constant! */ if (GET_CODE (XEXP (addr1, 1)) != CONST_INT) return 0; offset1 = INTVAL (XEXP (addr1, 1)); } } else if (GET_CODE (addr1) != REG) return 0; else { reg1 = REGNO (addr1); /* This was a simple (mem (reg)) expression. Offset is 0. */ offset1 = 0; } /* Make sure the second address is a (mem (plus (reg) (const_int). */ if (GET_CODE (addr2) != PLUS) return 0; if (GET_CODE (XEXP (addr2, 0)) != REG || GET_CODE (XEXP (addr2, 1)) != CONST_INT) return 0; if (reg1 != REGNO (XEXP (addr2, 0))) return 0; if (dependent_reg_rtx != NULL_RTX && reg1 == REGNO (dependent_reg_rtx)) return 0; /* The first offset must be evenly divisible by 8 to ensure the address is 64 bit aligned. */ if (offset1 % 8 != 0) return 0; /* The offset for the second addr must be 4 more than the first addr. */ if (INTVAL (XEXP (addr2, 1)) != offset1 + 4) return 0; /* All the tests passed. addr1 and addr2 are valid for ldd and std instructions. */ return 1; } /* Return 1 if reg is a pseudo, or is the first register in a hard register pair. This makes it a candidate for use in ldd and std insns. */ int register_ok_for_ldd (rtx reg) { /* We might have been passed a SUBREG. */ if (GET_CODE (reg) != REG) return 0; if (REGNO (reg) < FIRST_PSEUDO_REGISTER) return (REGNO (reg) % 2 == 0); else return 1; } /* Print operand X (an rtx) in assembler syntax to file FILE. CODE is a letter or dot (`z' in `%z0') or 0 if no letter was specified. For `%' followed by punctuation, CODE is the punctuation and X is null. */ void print_operand (FILE *file, rtx x, int code) { switch (code) { case '#': /* Output a 'nop' if there's nothing for the delay slot. */ if (dbr_sequence_length () == 0) fputs ("\n\t nop", file); return; case '*': /* Output an annul flag if there's nothing for the delay slot and we are optimizing. This is always used with '(' below. */ /* Sun OS 4.1.1 dbx can't handle an annulled unconditional branch; this is a dbx bug. So, we only do this when optimizing. */ /* On UltraSPARC, a branch in a delay slot causes a pipeline flush. Always emit a nop in case the next instruction is a branch. */ if (dbr_sequence_length () == 0 && (optimize && (int)sparc_cpu < PROCESSOR_V9)) fputs (",a", file); return; case '(': /* Output a 'nop' if there's nothing for the delay slot and we are not optimizing. This is always used with '*' above. */ if (dbr_sequence_length () == 0 && ! (optimize && (int)sparc_cpu < PROCESSOR_V9)) fputs ("\n\t nop", file); return; case '_': /* Output the Embedded Medium/Anywhere code model base register. */ fputs (EMBMEDANY_BASE_REG, file); return; case '@': /* Print out what we are using as the frame pointer. This might be %fp, or might be %sp+offset. */ /* ??? What if offset is too big? Perhaps the caller knows it isn't? */ fprintf (file, "%s+"HOST_WIDE_INT_PRINT_DEC, reg_names[REGNO (frame_base_reg)], frame_base_offset); return; case '&': /* Print some local dynamic TLS name. */ assemble_name (file, get_some_local_dynamic_name ()); return; case 'Y': /* Adjust the operand to take into account a RESTORE operation. */ if (GET_CODE (x) == CONST_INT) break; else if (GET_CODE (x) != REG) output_operand_lossage ("invalid %%Y operand"); else if (REGNO (x) < 8) fputs (reg_names[REGNO (x)], file); else if (REGNO (x) >= 24 && REGNO (x) < 32) fputs (reg_names[REGNO (x)-16], file); else output_operand_lossage ("invalid %%Y operand"); return; case 'L': /* Print out the low order register name of a register pair. */ if (WORDS_BIG_ENDIAN) fputs (reg_names[REGNO (x)+1], file); else fputs (reg_names[REGNO (x)], file); return; case 'H': /* Print out the high order register name of a register pair. */ if (WORDS_BIG_ENDIAN) fputs (reg_names[REGNO (x)], file); else fputs (reg_names[REGNO (x)+1], file); return; case 'R': /* Print out the second register name of a register pair or quad. I.e., R (%o0) => %o1. */ fputs (reg_names[REGNO (x)+1], file); return; case 'S': /* Print out the third register name of a register quad. I.e., S (%o0) => %o2. */ fputs (reg_names[REGNO (x)+2], file); return; case 'T': /* Print out the fourth register name of a register quad. I.e., T (%o0) => %o3. */ fputs (reg_names[REGNO (x)+3], file); return; case 'x': /* Print a condition code register. */ if (REGNO (x) == SPARC_ICC_REG) { /* We don't handle CC[X]_NOOVmode because they're not supposed to occur here. */ if (GET_MODE (x) == CCmode) fputs ("%icc", file); else if (GET_MODE (x) == CCXmode) fputs ("%xcc", file); else abort (); } else /* %fccN register */ fputs (reg_names[REGNO (x)], file); return; case 'm': /* Print the operand's address only. */ output_address (XEXP (x, 0)); return; case 'r': /* In this case we need a register. Use %g0 if the operand is const0_rtx. */ if (x == const0_rtx || (GET_MODE (x) != VOIDmode && x == CONST0_RTX (GET_MODE (x)))) { fputs ("%g0", file); return; } else break; case 'A': switch (GET_CODE (x)) { case IOR: fputs ("or", file); break; case AND: fputs ("and", file); break; case XOR: fputs ("xor", file); break; default: output_operand_lossage ("invalid %%A operand"); } return; case 'B': switch (GET_CODE (x)) { case IOR: fputs ("orn", file); break; case AND: fputs ("andn", file); break; case XOR: fputs ("xnor", file); break; default: output_operand_lossage ("invalid %%B operand"); } return; /* These are used by the conditional move instructions. */ case 'c' : case 'C': { enum rtx_code rc = GET_CODE (x); if (code == 'c') { enum machine_mode mode = GET_MODE (XEXP (x, 0)); if (mode == CCFPmode || mode == CCFPEmode) rc = reverse_condition_maybe_unordered (GET_CODE (x)); else rc = reverse_condition (GET_CODE (x)); } switch (rc) { case NE: fputs ("ne", file); break; case EQ: fputs ("e", file); break; case GE: fputs ("ge", file); break; case GT: fputs ("g", file); break; case LE: fputs ("le", file); break; case LT: fputs ("l", file); break; case GEU: fputs ("geu", file); break; case GTU: fputs ("gu", file); break; case LEU: fputs ("leu", file); break; case LTU: fputs ("lu", file); break; case LTGT: fputs ("lg", file); break; case UNORDERED: fputs ("u", file); break; case ORDERED: fputs ("o", file); break; case UNLT: fputs ("ul", file); break; case UNLE: fputs ("ule", file); break; case UNGT: fputs ("ug", file); break; case UNGE: fputs ("uge", file); break; case UNEQ: fputs ("ue", file); break; default: output_operand_lossage (code == 'c' ? "invalid %%c operand" : "invalid %%C operand"); } return; } /* These are used by the movr instruction pattern. */ case 'd': case 'D': { enum rtx_code rc = (code == 'd' ? reverse_condition (GET_CODE (x)) : GET_CODE (x)); switch (rc) { case NE: fputs ("ne", file); break; case EQ: fputs ("e", file); break; case GE: fputs ("gez", file); break; case LT: fputs ("lz", file); break; case LE: fputs ("lez", file); break; case GT: fputs ("gz", file); break; default: output_operand_lossage (code == 'd' ? "invalid %%d operand" : "invalid %%D operand"); } return; } case 'b': { /* Print a sign-extended character. */ int i = trunc_int_for_mode (INTVAL (x), QImode); fprintf (file, "%d", i); return; } case 'f': /* Operand must be a MEM; write its address. */ if (GET_CODE (x) != MEM) output_operand_lossage ("invalid %%f operand"); output_address (XEXP (x, 0)); return; case 's': { /* Print a sign-extended 32-bit value. */ HOST_WIDE_INT i; if (GET_CODE(x) == CONST_INT) i = INTVAL (x); else if (GET_CODE(x) == CONST_DOUBLE) i = CONST_DOUBLE_LOW (x); else { output_operand_lossage ("invalid %%s operand"); return; } i = trunc_int_for_mode (i, SImode); fprintf (file, HOST_WIDE_INT_PRINT_DEC, i); return; } case 0: /* Do nothing special. */ break; default: /* Undocumented flag. */ output_operand_lossage ("invalid operand output code"); } if (GET_CODE (x) == REG) fputs (reg_names[REGNO (x)], file); else if (GET_CODE (x) == MEM) { fputc ('[', file); /* Poor Sun assembler doesn't understand absolute addressing. */ if (CONSTANT_P (XEXP (x, 0))) fputs ("%g0+", file); output_address (XEXP (x, 0)); fputc (']', file); } else if (GET_CODE (x) == HIGH) { fputs ("%hi(", file); output_addr_const (file, XEXP (x, 0)); fputc (')', file); } else if (GET_CODE (x) == LO_SUM) { print_operand (file, XEXP (x, 0), 0); if (TARGET_CM_MEDMID) fputs ("+%l44(", file); else fputs ("+%lo(", file); output_addr_const (file, XEXP (x, 1)); fputc (')', file); } else if (GET_CODE (x) == CONST_DOUBLE && (GET_MODE (x) == VOIDmode || GET_MODE_CLASS (GET_MODE (x)) == MODE_INT)) { if (CONST_DOUBLE_HIGH (x) == 0) fprintf (file, "%u", (unsigned int) CONST_DOUBLE_LOW (x)); else if (CONST_DOUBLE_HIGH (x) == -1 && CONST_DOUBLE_LOW (x) < 0) fprintf (file, "%d", (int) CONST_DOUBLE_LOW (x)); else output_operand_lossage ("long long constant not a valid immediate operand"); } else if (GET_CODE (x) == CONST_DOUBLE) output_operand_lossage ("floating point constant not a valid immediate operand"); else { output_addr_const (file, x); } } /* Target hook for assembling integer objects. The sparc version has special handling for aligned DI-mode objects. */ static bool sparc_assemble_integer (rtx x, unsigned int size, int aligned_p) { /* ??? We only output .xword's for symbols and only then in environments where the assembler can handle them. */ if (aligned_p && size == 8 && (GET_CODE (x) != CONST_INT && GET_CODE (x) != CONST_DOUBLE)) { if (TARGET_V9) { assemble_integer_with_op ("\t.xword\t", x); return true; } else { assemble_aligned_integer (4, const0_rtx); assemble_aligned_integer (4, x); return true; } } return default_assemble_integer (x, size, aligned_p); } /* Return the value of a code used in the .proc pseudo-op that says what kind of result this function returns. For non-C types, we pick the closest C type. */ #ifndef SHORT_TYPE_SIZE #define SHORT_TYPE_SIZE (BITS_PER_UNIT * 2) #endif #ifndef INT_TYPE_SIZE #define INT_TYPE_SIZE BITS_PER_WORD #endif #ifndef LONG_TYPE_SIZE #define LONG_TYPE_SIZE BITS_PER_WORD #endif #ifndef LONG_LONG_TYPE_SIZE #define LONG_LONG_TYPE_SIZE (BITS_PER_WORD * 2) #endif #ifndef FLOAT_TYPE_SIZE #define FLOAT_TYPE_SIZE BITS_PER_WORD #endif #ifndef DOUBLE_TYPE_SIZE #define DOUBLE_TYPE_SIZE (BITS_PER_WORD * 2) #endif #ifndef LONG_DOUBLE_TYPE_SIZE #define LONG_DOUBLE_TYPE_SIZE (BITS_PER_WORD * 2) #endif unsigned long sparc_type_code (register tree type) { register unsigned long qualifiers = 0; register unsigned shift; /* Only the first 30 bits of the qualifier are valid. We must refrain from setting more, since some assemblers will give an error for this. Also, we must be careful to avoid shifts of 32 bits or more to avoid getting unpredictable results. */ for (shift = 6; shift < 30; shift += 2, type = TREE_TYPE (type)) { switch (TREE_CODE (type)) { case ERROR_MARK: return qualifiers; case ARRAY_TYPE: qualifiers |= (3 << shift); break; case FUNCTION_TYPE: case METHOD_TYPE: qualifiers |= (2 << shift); break; case POINTER_TYPE: case REFERENCE_TYPE: case OFFSET_TYPE: qualifiers |= (1 << shift); break; case RECORD_TYPE: return (qualifiers | 8); case UNION_TYPE: case QUAL_UNION_TYPE: return (qualifiers | 9); case ENUMERAL_TYPE: return (qualifiers | 10); case VOID_TYPE: return (qualifiers | 16); case INTEGER_TYPE: /* If this is a range type, consider it to be the underlying type. */ if (TREE_TYPE (type) != 0) break; /* Carefully distinguish all the standard types of C, without messing up if the language is not C. We do this by testing TYPE_PRECISION and TYPE_UNSIGNED. The old code used to look at both the names and the above fields, but that's redundant. Any type whose size is between two C types will be considered to be the wider of the two types. Also, we do not have a special code to use for "long long", so anything wider than long is treated the same. Note that we can't distinguish between "int" and "long" in this code if they are the same size, but that's fine, since neither can the assembler. */ if (TYPE_PRECISION (type) <= CHAR_TYPE_SIZE) return (qualifiers | (TYPE_UNSIGNED (type) ? 12 : 2)); else if (TYPE_PRECISION (type) <= SHORT_TYPE_SIZE) return (qualifiers | (TYPE_UNSIGNED (type) ? 13 : 3)); else if (TYPE_PRECISION (type) <= INT_TYPE_SIZE) return (qualifiers | (TYPE_UNSIGNED (type) ? 14 : 4)); else return (qualifiers | (TYPE_UNSIGNED (type) ? 15 : 5)); case REAL_TYPE: /* If this is a range type, consider it to be the underlying type. */ if (TREE_TYPE (type) != 0) break; /* Carefully distinguish all the standard types of C, without messing up if the language is not C. */ if (TYPE_PRECISION (type) == FLOAT_TYPE_SIZE) return (qualifiers | 6); else return (qualifiers | 7); case COMPLEX_TYPE: /* GNU Fortran COMPLEX type. */ /* ??? We need to distinguish between double and float complex types, but I don't know how yet because I can't reach this code from existing front-ends. */ return (qualifiers | 7); /* Who knows? */ case VECTOR_TYPE: case CHAR_TYPE: /* GNU Pascal CHAR type. Not used in C. */ case BOOLEAN_TYPE: /* GNU Fortran BOOLEAN type. */ case FILE_TYPE: /* GNU Pascal FILE type. */ case SET_TYPE: /* GNU Pascal SET type. */ case LANG_TYPE: /* ? */ return qualifiers; default: abort (); /* Not a type! */ } } return qualifiers; } /* Nested function support. */ /* Emit RTL insns to initialize the variable parts of a trampoline. FNADDR is an RTX for the address of the function's pure code. CXT is an RTX for the static chain value for the function. This takes 16 insns: 2 shifts & 2 ands (to split up addresses), 4 sethi (to load in opcodes), 4 iors (to merge address and opcodes), and 4 writes (to store insns). This is a bit excessive. Perhaps a different mechanism would be better here. Emit enough FLUSH insns to synchronize the data and instruction caches. */ void sparc_initialize_trampoline (rtx tramp, rtx fnaddr, rtx cxt) { /* SPARC 32-bit trampoline: sethi %hi(fn), %g1 sethi %hi(static), %g2 jmp %g1+%lo(fn) or %g2, %lo(static), %g2 SETHI i,r = 00rr rrr1 00ii iiii iiii iiii iiii iiii JMPL r+i,d = 10dd ddd1 1100 0rrr rr1i iiii iiii iiii */ emit_move_insn (gen_rtx_MEM (SImode, plus_constant (tramp, 0)), expand_binop (SImode, ior_optab, expand_shift (RSHIFT_EXPR, SImode, fnaddr, size_int (10), 0, 1), GEN_INT (trunc_int_for_mode (0x03000000, SImode)), NULL_RTX, 1, OPTAB_DIRECT)); emit_move_insn (gen_rtx_MEM (SImode, plus_constant (tramp, 4)), expand_binop (SImode, ior_optab, expand_shift (RSHIFT_EXPR, SImode, cxt, size_int (10), 0, 1), GEN_INT (trunc_int_for_mode (0x05000000, SImode)), NULL_RTX, 1, OPTAB_DIRECT)); emit_move_insn (gen_rtx_MEM (SImode, plus_constant (tramp, 8)), expand_binop (SImode, ior_optab, expand_and (SImode, fnaddr, GEN_INT (0x3ff), NULL_RTX), GEN_INT (trunc_int_for_mode (0x81c06000, SImode)), NULL_RTX, 1, OPTAB_DIRECT)); emit_move_insn (gen_rtx_MEM (SImode, plus_constant (tramp, 12)), expand_binop (SImode, ior_optab, expand_and (SImode, cxt, GEN_INT (0x3ff), NULL_RTX), GEN_INT (trunc_int_for_mode (0x8410a000, SImode)), NULL_RTX, 1, OPTAB_DIRECT)); /* On UltraSPARC a flush flushes an entire cache line. The trampoline is aligned on a 16 byte boundary so one flush clears it all. */ emit_insn (gen_flush (validize_mem (gen_rtx_MEM (SImode, tramp)))); if (sparc_cpu != PROCESSOR_ULTRASPARC && sparc_cpu != PROCESSOR_ULTRASPARC3) emit_insn (gen_flush (validize_mem (gen_rtx_MEM (SImode, plus_constant (tramp, 8))))); /* Call __enable_execute_stack after writing onto the stack to make sure the stack address is accessible. */ #ifdef ENABLE_EXECUTE_STACK emit_library_call (gen_rtx_SYMBOL_REF (Pmode, "__enable_execute_stack"), LCT_NORMAL, VOIDmode, 1, tramp, Pmode); #endif } /* The 64-bit version is simpler because it makes more sense to load the values as "immediate" data out of the trampoline. It's also easier since we can read the PC without clobbering a register. */ void sparc64_initialize_trampoline (rtx tramp, rtx fnaddr, rtx cxt) { /* SPARC 64-bit trampoline: rd %pc, %g1 ldx [%g1+24], %g5 jmp %g5 ldx [%g1+16], %g5 +16 bytes data */ emit_move_insn (gen_rtx_MEM (SImode, tramp), GEN_INT (trunc_int_for_mode (0x83414000, SImode))); emit_move_insn (gen_rtx_MEM (SImode, plus_constant (tramp, 4)), GEN_INT (trunc_int_for_mode (0xca586018, SImode))); emit_move_insn (gen_rtx_MEM (SImode, plus_constant (tramp, 8)), GEN_INT (trunc_int_for_mode (0x81c14000, SImode))); emit_move_insn (gen_rtx_MEM (SImode, plus_constant (tramp, 12)), GEN_INT (trunc_int_for_mode (0xca586010, SImode))); emit_move_insn (gen_rtx_MEM (DImode, plus_constant (tramp, 16)), cxt); emit_move_insn (gen_rtx_MEM (DImode, plus_constant (tramp, 24)), fnaddr); emit_insn (gen_flushdi (validize_mem (gen_rtx_MEM (DImode, tramp)))); if (sparc_cpu != PROCESSOR_ULTRASPARC && sparc_cpu != PROCESSOR_ULTRASPARC3) emit_insn (gen_flushdi (validize_mem (gen_rtx_MEM (DImode, plus_constant (tramp, 8))))); /* Call __enable_execute_stack after writing onto the stack to make sure the stack address is accessible. */ #ifdef ENABLE_EXECUTE_STACK emit_library_call (gen_rtx_SYMBOL_REF (Pmode, "__enable_execute_stack"), LCT_NORMAL, VOIDmode, 1, tramp, Pmode); #endif } /* Adjust the cost of a scheduling dependency. Return the new cost of a dependency LINK or INSN on DEP_INSN. COST is the current cost. */ static int supersparc_adjust_cost (rtx insn, rtx link, rtx dep_insn, int cost) { enum attr_type insn_type; if (! recog_memoized (insn)) return 0; insn_type = get_attr_type (insn); if (REG_NOTE_KIND (link) == 0) { /* Data dependency; DEP_INSN writes a register that INSN reads some cycles later. */ /* if a load, then the dependence must be on the memory address; add an extra "cycle". Note that the cost could be two cycles if the reg was written late in an instruction group; we ca not tell here. */ if (insn_type == TYPE_LOAD || insn_type == TYPE_FPLOAD) return cost + 3; /* Get the delay only if the address of the store is the dependence. */ if (insn_type == TYPE_STORE || insn_type == TYPE_FPSTORE) { rtx pat = PATTERN(insn); rtx dep_pat = PATTERN (dep_insn); if (GET_CODE (pat) != SET || GET_CODE (dep_pat) != SET) return cost; /* This should not happen! */ /* The dependency between the two instructions was on the data that is being stored. Assume that this implies that the address of the store is not dependent. */ if (rtx_equal_p (SET_DEST (dep_pat), SET_SRC (pat))) return cost; return cost + 3; /* An approximation. */ } /* A shift instruction cannot receive its data from an instruction in the same cycle; add a one cycle penalty. */ if (insn_type == TYPE_SHIFT) return cost + 3; /* Split before cascade into shift. */ } else { /* Anti- or output- dependency; DEP_INSN reads/writes a register that INSN writes some cycles later. */ /* These are only significant for the fpu unit; writing a fp reg before the fpu has finished with it stalls the processor. */ /* Reusing an integer register causes no problems. */ if (insn_type == TYPE_IALU || insn_type == TYPE_SHIFT) return 0; } return cost; } static int hypersparc_adjust_cost (rtx insn, rtx link, rtx dep_insn, int cost) { enum attr_type insn_type, dep_type; rtx pat = PATTERN(insn); rtx dep_pat = PATTERN (dep_insn); if (recog_memoized (insn) < 0 || recog_memoized (dep_insn) < 0) return cost; insn_type = get_attr_type (insn); dep_type = get_attr_type (dep_insn); switch (REG_NOTE_KIND (link)) { case 0: /* Data dependency; DEP_INSN writes a register that INSN reads some cycles later. */ switch (insn_type) { case TYPE_STORE: case TYPE_FPSTORE: /* Get the delay iff the address of the store is the dependence. */ if (GET_CODE (pat) != SET || GET_CODE (dep_pat) != SET) return cost; if (rtx_equal_p (SET_DEST (dep_pat), SET_SRC (pat))) return cost; return cost + 3; case TYPE_LOAD: case TYPE_SLOAD: case TYPE_FPLOAD: /* If a load, then the dependence must be on the memory address. If the addresses aren't equal, then it might be a false dependency */ if (dep_type == TYPE_STORE || dep_type == TYPE_FPSTORE) { if (GET_CODE (pat) != SET || GET_CODE (dep_pat) != SET || GET_CODE (SET_DEST (dep_pat)) != MEM || GET_CODE (SET_SRC (pat)) != MEM || ! rtx_equal_p (XEXP (SET_DEST (dep_pat), 0), XEXP (SET_SRC (pat), 0))) return cost + 2; return cost + 8; } break; case TYPE_BRANCH: /* Compare to branch latency is 0. There is no benefit from separating compare and branch. */ if (dep_type == TYPE_COMPARE) return 0; /* Floating point compare to branch latency is less than compare to conditional move. */ if (dep_type == TYPE_FPCMP) return cost - 1; break; default: break; } break; case REG_DEP_ANTI: /* Anti-dependencies only penalize the fpu unit. */ if (insn_type == TYPE_IALU || insn_type == TYPE_SHIFT) return 0; break; default: break; } return cost; } static int sparc_adjust_cost(rtx insn, rtx link, rtx dep, int cost) { switch (sparc_cpu) { case PROCESSOR_SUPERSPARC: cost = supersparc_adjust_cost (insn, link, dep, cost); break; case PROCESSOR_HYPERSPARC: case PROCESSOR_SPARCLITE86X: cost = hypersparc_adjust_cost (insn, link, dep, cost); break; default: break; } return cost; } static void sparc_sched_init (FILE *dump ATTRIBUTE_UNUSED, int sched_verbose ATTRIBUTE_UNUSED, int max_ready ATTRIBUTE_UNUSED) { } static int sparc_use_sched_lookahead (void) { if (sparc_cpu == PROCESSOR_ULTRASPARC || sparc_cpu == PROCESSOR_ULTRASPARC3) return 4; if ((1 << sparc_cpu) & ((1 << PROCESSOR_SUPERSPARC) | (1 << PROCESSOR_HYPERSPARC) | (1 << PROCESSOR_SPARCLITE86X))) return 3; return 0; } static int sparc_issue_rate (void) { switch (sparc_cpu) { default: return 1; case PROCESSOR_V9: /* Assume V9 processors are capable of at least dual-issue. */ return 2; case PROCESSOR_SUPERSPARC: return 3; case PROCESSOR_HYPERSPARC: case PROCESSOR_SPARCLITE86X: return 2; case PROCESSOR_ULTRASPARC: case PROCESSOR_ULTRASPARC3: return 4; } } static int set_extends (rtx insn) { register rtx pat = PATTERN (insn); switch (GET_CODE (SET_SRC (pat))) { /* Load and some shift instructions zero extend. */ case MEM: case ZERO_EXTEND: /* sethi clears the high bits */ case HIGH: /* LO_SUM is used with sethi. sethi cleared the high bits and the values used with lo_sum are positive */ case LO_SUM: /* Store flag stores 0 or 1 */ case LT: case LTU: case GT: case GTU: case LE: case LEU: case GE: case GEU: case EQ: case NE: return 1; case AND: { rtx op0 = XEXP (SET_SRC (pat), 0); rtx op1 = XEXP (SET_SRC (pat), 1); if (GET_CODE (op1) == CONST_INT) return INTVAL (op1) >= 0; if (GET_CODE (op0) != REG) return 0; if (sparc_check_64 (op0, insn) == 1) return 1; return (GET_CODE (op1) == REG && sparc_check_64 (op1, insn) == 1); } case IOR: case XOR: { rtx op0 = XEXP (SET_SRC (pat), 0); rtx op1 = XEXP (SET_SRC (pat), 1); if (GET_CODE (op0) != REG || sparc_check_64 (op0, insn) <= 0) return 0; if (GET_CODE (op1) == CONST_INT) return INTVAL (op1) >= 0; return (GET_CODE (op1) == REG && sparc_check_64 (op1, insn) == 1); } case LSHIFTRT: return GET_MODE (SET_SRC (pat)) == SImode; /* Positive integers leave the high bits zero. */ case CONST_DOUBLE: return ! (CONST_DOUBLE_LOW (SET_SRC (pat)) & 0x80000000); case CONST_INT: return ! (INTVAL (SET_SRC (pat)) & 0x80000000); case ASHIFTRT: case SIGN_EXTEND: return - (GET_MODE (SET_SRC (pat)) == SImode); case REG: return sparc_check_64 (SET_SRC (pat), insn); default: return 0; } } /* We _ought_ to have only one kind per function, but... */ static GTY(()) rtx sparc_addr_diff_list; static GTY(()) rtx sparc_addr_list; void sparc_defer_case_vector (rtx lab, rtx vec, int diff) { vec = gen_rtx_EXPR_LIST (VOIDmode, lab, vec); if (diff) sparc_addr_diff_list = gen_rtx_EXPR_LIST (VOIDmode, vec, sparc_addr_diff_list); else sparc_addr_list = gen_rtx_EXPR_LIST (VOIDmode, vec, sparc_addr_list); } static void sparc_output_addr_vec (rtx vec) { rtx lab = XEXP (vec, 0), body = XEXP (vec, 1); int idx, vlen = XVECLEN (body, 0); #ifdef ASM_OUTPUT_ADDR_VEC_START ASM_OUTPUT_ADDR_VEC_START (asm_out_file); #endif #ifdef ASM_OUTPUT_CASE_LABEL ASM_OUTPUT_CASE_LABEL (asm_out_file, "L", CODE_LABEL_NUMBER (lab), NEXT_INSN (lab)); #else (*targetm.asm_out.internal_label) (asm_out_file, "L", CODE_LABEL_NUMBER (lab)); #endif for (idx = 0; idx < vlen; idx++) { ASM_OUTPUT_ADDR_VEC_ELT (asm_out_file, CODE_LABEL_NUMBER (XEXP (XVECEXP (body, 0, idx), 0))); } #ifdef ASM_OUTPUT_ADDR_VEC_END ASM_OUTPUT_ADDR_VEC_END (asm_out_file); #endif } static void sparc_output_addr_diff_vec (rtx vec) { rtx lab = XEXP (vec, 0), body = XEXP (vec, 1); rtx base = XEXP (XEXP (body, 0), 0); int idx, vlen = XVECLEN (body, 1); #ifdef ASM_OUTPUT_ADDR_VEC_START ASM_OUTPUT_ADDR_VEC_START (asm_out_file); #endif #ifdef ASM_OUTPUT_CASE_LABEL ASM_OUTPUT_CASE_LABEL (asm_out_file, "L", CODE_LABEL_NUMBER (lab), NEXT_INSN (lab)); #else (*targetm.asm_out.internal_label) (asm_out_file, "L", CODE_LABEL_NUMBER (lab)); #endif for (idx = 0; idx < vlen; idx++) { ASM_OUTPUT_ADDR_DIFF_ELT (asm_out_file, body, CODE_LABEL_NUMBER (XEXP (XVECEXP (body, 1, idx), 0)), CODE_LABEL_NUMBER (base)); } #ifdef ASM_OUTPUT_ADDR_VEC_END ASM_OUTPUT_ADDR_VEC_END (asm_out_file); #endif } static void sparc_output_deferred_case_vectors (void) { rtx t; int align; if (sparc_addr_list == NULL_RTX && sparc_addr_diff_list == NULL_RTX) return; /* Align to cache line in the function's code section. */ function_section (current_function_decl); align = floor_log2 (FUNCTION_BOUNDARY / BITS_PER_UNIT); if (align > 0) ASM_OUTPUT_ALIGN (asm_out_file, align); for (t = sparc_addr_list; t ; t = XEXP (t, 1)) sparc_output_addr_vec (XEXP (t, 0)); for (t = sparc_addr_diff_list; t ; t = XEXP (t, 1)) sparc_output_addr_diff_vec (XEXP (t, 0)); sparc_addr_list = sparc_addr_diff_list = NULL_RTX; } /* Return 0 if the high 32 bits of X (the low word of X, if DImode) are unknown. Return 1 if the high bits are zero, -1 if the register is sign extended. */ int sparc_check_64 (rtx x, rtx insn) { /* If a register is set only once it is safe to ignore insns this code does not know how to handle. The loop will either recognize the single set and return the correct value or fail to recognize it and return 0. */ int set_once = 0; rtx y = x; if (GET_CODE (x) != REG) abort (); if (GET_MODE (x) == DImode) y = gen_rtx_REG (SImode, REGNO (x) + WORDS_BIG_ENDIAN); if (flag_expensive_optimizations && REG_N_SETS (REGNO (y)) == 1) set_once = 1; if (insn == 0) { if (set_once) insn = get_last_insn_anywhere (); else return 0; } while ((insn = PREV_INSN (insn))) { switch (GET_CODE (insn)) { case JUMP_INSN: case NOTE: break; case CODE_LABEL: case CALL_INSN: default: if (! set_once) return 0; break; case INSN: { rtx pat = PATTERN (insn); if (GET_CODE (pat) != SET) return 0; if (rtx_equal_p (x, SET_DEST (pat))) return set_extends (insn); if (y && rtx_equal_p (y, SET_DEST (pat))) return set_extends (insn); if (reg_overlap_mentioned_p (SET_DEST (pat), y)) return 0; } } } return 0; } /* Returns assembly code to perform a DImode shift using a 64-bit global or out register on SPARC-V8+. */ const char * output_v8plus_shift (rtx *operands, rtx insn, const char *opcode) { static char asm_code[60]; /* The scratch register is only required when the destination register is not a 64-bit global or out register. */ if (which_alternative != 2) operands[3] = operands[0]; /* We can only shift by constants <= 63. */ if (GET_CODE (operands[2]) == CONST_INT) operands[2] = GEN_INT (INTVAL (operands[2]) & 0x3f); if (GET_CODE (operands[1]) == CONST_INT) { output_asm_insn ("mov\t%1, %3", operands); } else { output_asm_insn ("sllx\t%H1, 32, %3", operands); if (sparc_check_64 (operands[1], insn) <= 0) output_asm_insn ("srl\t%L1, 0, %L1", operands); output_asm_insn ("or\t%L1, %3, %3", operands); } strcpy(asm_code, opcode); if (which_alternative != 2) return strcat (asm_code, "\t%0, %2, %L0\n\tsrlx\t%L0, 32, %H0"); else return strcat (asm_code, "\t%3, %2, %3\n\tsrlx\t%3, 32, %H0\n\tmov\t%3, %L0"); } /* Output rtl to increment the profiler label LABELNO for profiling a function entry. */ void sparc_profile_hook (int labelno) { char buf[32]; rtx lab, fun; ASM_GENERATE_INTERNAL_LABEL (buf, "LP", labelno); lab = gen_rtx_SYMBOL_REF (Pmode, ggc_strdup (buf)); fun = gen_rtx_SYMBOL_REF (Pmode, MCOUNT_FUNCTION); emit_library_call (fun, LCT_NORMAL, VOIDmode, 1, lab, Pmode); } #ifdef OBJECT_FORMAT_ELF static void sparc_elf_asm_named_section (const char *name, unsigned int flags) { if (flags & SECTION_MERGE) { /* entsize cannot be expressed in this section attributes encoding style. */ default_elf_asm_named_section (name, flags); return; } fprintf (asm_out_file, "\t.section\t\"%s\"", name); if (!(flags & SECTION_DEBUG)) fputs (",#alloc", asm_out_file); if (flags & SECTION_WRITE) fputs (",#write", asm_out_file); if (flags & SECTION_TLS) fputs (",#tls", asm_out_file); if (flags & SECTION_CODE) fputs (",#execinstr", asm_out_file); /* ??? Handle SECTION_BSS. */ fputc ('\n', asm_out_file); } #endif /* OBJECT_FORMAT_ELF */ /* We do not allow indirect calls to be optimized into sibling calls. We cannot use sibling calls when delayed branches are disabled because they will likely require the call delay slot to be filled. Also, on SPARC 32-bit we cannot emit a sibling call when the current function returns a structure. This is because the "unimp after call" convention would cause the callee to return to the wrong place. The generic code already disallows cases where the function being called returns a structure. It may seem strange how this last case could occur. Usually there is code after the call which jumps to epilogue code which dumps the return value into the struct return area. That ought to invalidate the sibling call right? Well, in the C++ case we can end up passing the pointer to the struct return area to a constructor (which returns void) and then nothing else happens. Such a sibling call would look valid without the added check here. */ static bool sparc_function_ok_for_sibcall (tree decl, tree exp ATTRIBUTE_UNUSED) { return (decl && flag_delayed_branch && (TARGET_ARCH64 || ! current_function_returns_struct)); } /* libfunc renaming. */ #include "config/gofast.h" static void sparc_init_libfuncs (void) { if (TARGET_ARCH32) { /* Use the subroutines that Sun's library provides for integer multiply and divide. The `*' prevents an underscore from being prepended by the compiler. .umul is a little faster than .mul. */ set_optab_libfunc (smul_optab, SImode, "*.umul"); set_optab_libfunc (sdiv_optab, SImode, "*.div"); set_optab_libfunc (udiv_optab, SImode, "*.udiv"); set_optab_libfunc (smod_optab, SImode, "*.rem"); set_optab_libfunc (umod_optab, SImode, "*.urem"); /* TFmode arithmetic. These names are part of the SPARC 32bit ABI. */ set_optab_libfunc (add_optab, TFmode, "_Q_add"); set_optab_libfunc (sub_optab, TFmode, "_Q_sub"); set_optab_libfunc (neg_optab, TFmode, "_Q_neg"); set_optab_libfunc (smul_optab, TFmode, "_Q_mul"); set_optab_libfunc (sdiv_optab, TFmode, "_Q_div"); /* We can define the TFmode sqrt optab only if TARGET_FPU. This is because with soft-float, the SFmode and DFmode sqrt instructions will be absent, and the compiler will notice and try to use the TFmode sqrt instruction for calls to the builtin function sqrt, but this fails. */ if (TARGET_FPU) set_optab_libfunc (sqrt_optab, TFmode, "_Q_sqrt"); set_optab_libfunc (eq_optab, TFmode, "_Q_feq"); set_optab_libfunc (ne_optab, TFmode, "_Q_fne"); set_optab_libfunc (gt_optab, TFmode, "_Q_fgt"); set_optab_libfunc (ge_optab, TFmode, "_Q_fge"); set_optab_libfunc (lt_optab, TFmode, "_Q_flt"); set_optab_libfunc (le_optab, TFmode, "_Q_fle"); set_conv_libfunc (sext_optab, TFmode, SFmode, "_Q_stoq"); set_conv_libfunc (sext_optab, TFmode, DFmode, "_Q_dtoq"); set_conv_libfunc (trunc_optab, SFmode, TFmode, "_Q_qtos"); set_conv_libfunc (trunc_optab, DFmode, TFmode, "_Q_qtod"); set_conv_libfunc (sfix_optab, SImode, TFmode, "_Q_qtoi"); set_conv_libfunc (ufix_optab, SImode, TFmode, "_Q_qtou"); set_conv_libfunc (sfloat_optab, TFmode, SImode, "_Q_itoq"); if (DITF_CONVERSION_LIBFUNCS) { set_conv_libfunc (sfix_optab, DImode, TFmode, "_Q_qtoll"); set_conv_libfunc (ufix_optab, DImode, TFmode, "_Q_qtoull"); set_conv_libfunc (sfloat_optab, TFmode, DImode, "_Q_lltoq"); } if (SUN_CONVERSION_LIBFUNCS) { set_conv_libfunc (sfix_optab, DImode, SFmode, "__ftoll"); set_conv_libfunc (ufix_optab, DImode, SFmode, "__ftoull"); set_conv_libfunc (sfix_optab, DImode, DFmode, "__dtoll"); set_conv_libfunc (ufix_optab, DImode, DFmode, "__dtoull"); } } if (TARGET_ARCH64) { /* In the SPARC 64bit ABI, SImode multiply and divide functions do not exist in the library. Make sure the compiler does not emit calls to them by accident. (It should always use the hardware instructions.) */ set_optab_libfunc (smul_optab, SImode, 0); set_optab_libfunc (sdiv_optab, SImode, 0); set_optab_libfunc (udiv_optab, SImode, 0); set_optab_libfunc (smod_optab, SImode, 0); set_optab_libfunc (umod_optab, SImode, 0); if (SUN_INTEGER_MULTIPLY_64) { set_optab_libfunc (smul_optab, DImode, "__mul64"); set_optab_libfunc (sdiv_optab, DImode, "__div64"); set_optab_libfunc (udiv_optab, DImode, "__udiv64"); set_optab_libfunc (smod_optab, DImode, "__rem64"); set_optab_libfunc (umod_optab, DImode, "__urem64"); } if (SUN_CONVERSION_LIBFUNCS) { set_conv_libfunc (sfix_optab, DImode, SFmode, "__ftol"); set_conv_libfunc (ufix_optab, DImode, SFmode, "__ftoul"); set_conv_libfunc (sfix_optab, DImode, DFmode, "__dtol"); set_conv_libfunc (ufix_optab, DImode, DFmode, "__dtoul"); } } gofast_maybe_init_libfuncs (); } int sparc_extra_constraint_check (rtx op, int c, int strict) { int reload_ok_mem; if (TARGET_ARCH64 && (c == 'T' || c == 'U')) return 0; switch (c) { case 'Q': return fp_sethi_p (op); case 'R': return fp_mov_p (op); case 'S': return fp_high_losum_p (op); case 'U': if (! strict || (GET_CODE (op) == REG && (REGNO (op) < FIRST_PSEUDO_REGISTER || reg_renumber[REGNO (op)] >= 0))) return register_ok_for_ldd (op); return 0; case 'W': case 'T': break; default: return 0; } /* Our memory extra constraints have to emulate the behavior of 'm' and 'o' in order for reload to work correctly. */ if (GET_CODE (op) == MEM) { reload_ok_mem = 0; if ((TARGET_ARCH64 || mem_min_alignment (op, 8)) && (! strict || strict_memory_address_p (Pmode, XEXP (op, 0)))) reload_ok_mem = 1; } else { reload_ok_mem = (reload_in_progress && GET_CODE (op) == REG && REGNO (op) >= FIRST_PSEUDO_REGISTER && reg_renumber [REGNO (op)] < 0); } return reload_ok_mem; } /* ??? This duplicates information provided to the compiler by the ??? scheduler description. Some day, teach genautomata to output ??? the latencies and then CSE will just use that. */ static bool sparc_rtx_costs (rtx x, int code, int outer_code, int *total) { enum machine_mode mode = GET_MODE (x); bool float_mode_p = FLOAT_MODE_P (mode); switch (code) { case CONST_INT: if (INTVAL (x) < 0x1000 && INTVAL (x) >= -0x1000) { *total = 0; return true; } /* FALLTHRU */ case HIGH: *total = 2; return true; case CONST: case LABEL_REF: case SYMBOL_REF: *total = 4; return true; case CONST_DOUBLE: if (GET_MODE (x) == DImode && ((XINT (x, 3) == 0 && (unsigned HOST_WIDE_INT) XINT (x, 2) < 0x1000) || (XINT (x, 3) == -1 && XINT (x, 2) < 0 && XINT (x, 2) >= -0x1000))) *total = 0; else *total = 8; return true; case MEM: /* If outer-code was a sign or zero extension, a cost of COSTS_N_INSNS (1) was already added in. This is why we are subtracting it back out. */ if (outer_code == ZERO_EXTEND) { *total = sparc_costs->int_zload - COSTS_N_INSNS (1); } else if (outer_code == SIGN_EXTEND) { *total = sparc_costs->int_sload - COSTS_N_INSNS (1); } else if (float_mode_p) { *total = sparc_costs->float_load; } else { *total = sparc_costs->int_load; } return true; case PLUS: case MINUS: if (float_mode_p) *total = sparc_costs->float_plusminus; else *total = COSTS_N_INSNS (1); return false; case MULT: if (float_mode_p) *total = sparc_costs->float_mul; else if (! TARGET_HARD_MUL) *total = COSTS_N_INSNS (25); else { int bit_cost; bit_cost = 0; if (sparc_costs->int_mul_bit_factor) { int nbits; if (GET_CODE (XEXP (x, 1)) == CONST_INT) { unsigned HOST_WIDE_INT value = INTVAL (XEXP (x, 1)); for (nbits = 0; value != 0; value &= value - 1) nbits++; } else if (GET_CODE (XEXP (x, 1)) == CONST_DOUBLE && GET_MODE (XEXP (x, 1)) == DImode) { rtx x1 = XEXP (x, 1); unsigned HOST_WIDE_INT value1 = XINT (x1, 2); unsigned HOST_WIDE_INT value2 = XINT (x1, 3); for (nbits = 0; value1 != 0; value1 &= value1 - 1) nbits++; for (; value2 != 0; value2 &= value2 - 1) nbits++; } else nbits = 7; if (nbits < 3) nbits = 3; bit_cost = (nbits - 3) / sparc_costs->int_mul_bit_factor; bit_cost = COSTS_N_INSNS (bit_cost); } if (mode == DImode) *total = sparc_costs->int_mulX + bit_cost; else *total = sparc_costs->int_mul + bit_cost; } return false; case ASHIFT: case ASHIFTRT: case LSHIFTRT: *total = COSTS_N_INSNS (1) + sparc_costs->shift_penalty; return false; case DIV: case UDIV: case MOD: case UMOD: if (float_mode_p) { if (mode == DFmode) *total = sparc_costs->float_div_df; else *total = sparc_costs->float_div_sf; } else { if (mode == DImode) *total = sparc_costs->int_divX; else *total = sparc_costs->int_div; } return false; case NEG: if (! float_mode_p) { *total = COSTS_N_INSNS (1); return false; } /* FALLTHRU */ case ABS: case FLOAT: case UNSIGNED_FLOAT: case FIX: case UNSIGNED_FIX: case FLOAT_EXTEND: case FLOAT_TRUNCATE: *total = sparc_costs->float_move; return false; case SQRT: if (mode == DFmode) *total = sparc_costs->float_sqrt_df; else *total = sparc_costs->float_sqrt_sf; return false; case COMPARE: if (float_mode_p) *total = sparc_costs->float_cmp; else *total = COSTS_N_INSNS (1); return false; case IF_THEN_ELSE: if (float_mode_p) *total = sparc_costs->float_cmove; else *total = sparc_costs->int_cmove; return false; default: return false; } } /* Emit the sequence of insns SEQ while preserving the register REG. */ static void emit_and_preserve (rtx seq, rtx reg) { rtx slot = gen_rtx_MEM (word_mode, plus_constant (stack_pointer_rtx, SPARC_STACK_BIAS)); emit_stack_pointer_decrement (GEN_INT (UNITS_PER_WORD)); emit_insn (gen_rtx_SET (VOIDmode, slot, reg)); emit_insn (seq); emit_insn (gen_rtx_SET (VOIDmode, reg, slot)); emit_stack_pointer_increment (GEN_INT (UNITS_PER_WORD)); } /* Output code to add DELTA to the first argument, and then jump to FUNCTION. Used for C++ multiple inheritance. */ static void sparc_output_mi_thunk (FILE *file, tree thunk_fndecl ATTRIBUTE_UNUSED, HOST_WIDE_INT delta, HOST_WIDE_INT vcall_offset ATTRIBUTE_UNUSED, tree function) { rtx this, insn, funexp, delta_rtx; unsigned int int_arg_first; reload_completed = 1; epilogue_completed = 1; no_new_pseudos = 1; reset_block_changes (); emit_note (NOTE_INSN_PROLOGUE_END); if (flag_delayed_branch) { /* We will emit a regular sibcall below, so we need to instruct output_sibcall that we are in a leaf function. */ current_function_uses_only_leaf_regs = 1; /* This will cause final.c to invoke leaf_renumber_regs so we must behave as if we were in a not-yet-leafified function. */ int_arg_first = SPARC_INCOMING_INT_ARG_FIRST; } else { /* We will emit the sibcall manually below, so we will need to manually spill non-leaf registers. */ current_function_uses_only_leaf_regs = 0; /* We really are in a leaf function. */ int_arg_first = SPARC_OUTGOING_INT_ARG_FIRST; } /* Find the "this" pointer. Normally in %o0, but in ARCH64 if the function returns a structure, the structure return pointer is there instead. */ if (TARGET_ARCH64 && aggregate_value_p (TREE_TYPE (TREE_TYPE (function)), function)) this = gen_rtx_REG (Pmode, int_arg_first + 1); else this = gen_rtx_REG (Pmode, int_arg_first); /* Add DELTA. When possible use a plain add, otherwise load it into a register first. */ delta_rtx = GEN_INT (delta); if (!SPARC_SIMM13_P (delta)) { rtx scratch = gen_rtx_REG (Pmode, 1); if (input_operand (delta_rtx, GET_MODE (scratch))) emit_insn (gen_rtx_SET (VOIDmode, scratch, delta_rtx)); else { if (TARGET_ARCH64) sparc_emit_set_const64 (scratch, delta_rtx); else sparc_emit_set_const32 (scratch, delta_rtx); } delta_rtx = scratch; } emit_insn (gen_rtx_SET (VOIDmode, this, gen_rtx_PLUS (Pmode, this, delta_rtx))); /* Generate a tail call to the target function. */ if (! TREE_USED (function)) { assemble_external (function); TREE_USED (function) = 1; } funexp = XEXP (DECL_RTL (function), 0); if (flag_delayed_branch) { funexp = gen_rtx_MEM (FUNCTION_MODE, funexp); insn = emit_call_insn (gen_sibcall (funexp)); SIBLING_CALL_P (insn) = 1; } else { /* The hoops we have to jump through in order to generate a sibcall without using delay slots... */ rtx spill_reg, seq, scratch = gen_rtx_REG (Pmode, 1); if (flag_pic) { spill_reg = gen_rtx_REG (word_mode, 15); /* %o7 */ start_sequence (); load_pic_register (); /* clobbers %o7 */ scratch = legitimize_pic_address (funexp, Pmode, scratch); seq = get_insns (); end_sequence (); emit_and_preserve (seq, spill_reg); } else if (TARGET_ARCH32) { emit_insn (gen_rtx_SET (VOIDmode, scratch, gen_rtx_HIGH (SImode, funexp))); emit_insn (gen_rtx_SET (VOIDmode, scratch, gen_rtx_LO_SUM (SImode, scratch, funexp))); } else /* TARGET_ARCH64 */ { switch (sparc_cmodel) { case CM_MEDLOW: case CM_MEDMID: /* The destination can serve as a temporary. */ sparc_emit_set_symbolic_const64 (scratch, funexp, scratch); break; case CM_MEDANY: case CM_EMBMEDANY: /* The destination cannot serve as a temporary. */ spill_reg = gen_rtx_REG (DImode, 15); /* %o7 */ start_sequence (); sparc_emit_set_symbolic_const64 (scratch, funexp, spill_reg); seq = get_insns (); end_sequence (); emit_and_preserve (seq, spill_reg); break; default: abort(); } } emit_jump_insn (gen_indirect_jump (scratch)); } emit_barrier (); /* Run just enough of rest_of_compilation to get the insns emitted. There's not really enough bulk here to make other passes such as instruction scheduling worth while. Note that use_thunk calls assemble_start_function and assemble_end_function. */ insn = get_insns (); insn_locators_initialize (); shorten_branches (insn); final_start_function (insn, file, 1); final (insn, file, 1, 0); final_end_function (); reload_completed = 0; epilogue_completed = 0; no_new_pseudos = 0; } /* How to allocate a 'struct machine_function'. */ static struct machine_function * sparc_init_machine_status (void) { return ggc_alloc_cleared (sizeof (struct machine_function)); } /* Locate some local-dynamic symbol still in use by this function so that we can print its name in local-dynamic base patterns. */ static const char * get_some_local_dynamic_name (void) { rtx insn; if (cfun->machine->some_ld_name) return cfun->machine->some_ld_name; for (insn = get_insns (); insn ; insn = NEXT_INSN (insn)) if (INSN_P (insn) && for_each_rtx (&PATTERN (insn), get_some_local_dynamic_name_1, 0)) return cfun->machine->some_ld_name; abort (); } static int get_some_local_dynamic_name_1 (rtx *px, void *data ATTRIBUTE_UNUSED) { rtx x = *px; if (x && GET_CODE (x) == SYMBOL_REF && SYMBOL_REF_TLS_MODEL (x) == TLS_MODEL_LOCAL_DYNAMIC) { cfun->machine->some_ld_name = XSTR (x, 0); return 1; } return 0; } /* This is called from dwarf2out.c via ASM_OUTPUT_DWARF_DTPREL. We need to emit DTP-relative relocations. */ void sparc_output_dwarf_dtprel (FILE *file, int size, rtx x) { switch (size) { case 4: fputs ("\t.word\t%r_tls_dtpoff32(", file); break; case 8: fputs ("\t.xword\t%r_tls_dtpoff64(", file); break; default: abort (); } output_addr_const (file, x); fputs (")", file); } #include "gt-sparc.h"