;; Machine description of the Renesas M32R cpu for GNU C compiler ;; Copyright (C) 1996, 1997, 1998, 1999, 2001, 2003, 2004 ; Free Software Foundation, Inc. ;; This file is part of GCC. ;; GCC is free software; you can redistribute it and/or modify it ;; under the terms of the GNU General Public License as published ;; by the Free Software Foundation; either version 2, or (at your ;; option) any later version. ;; GCC is distributed in the hope that it will be useful, but WITHOUT ;; ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ;; or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public ;; License for more details. ;; You should have received a copy of the GNU General Public License ;; along with GCC; see the file COPYING. If not, write to ;; the Free Software Foundation, 59 Temple Place - Suite 330, ;; Boston, MA 02111-1307, USA. ;; See file "rtl.def" for documentation on define_insn, match_*, et. al. ;; UNSPEC_VOLATILE usage (define_constants [(UNSPECV_BLOCKAGE 0) (UNSPECV_FLUSH_ICACHE 1)]) ;; UNSPEC usage (define_constants [(UNSPEC_LOAD_SDA_BASE 2) (UNSPEC_SET_CBIT 3) (UNSPEC_PIC_LOAD_ADDR 4) (UNSPEC_GET_PC 5)]) ;; Insn type. Used to default other attribute values. (define_attr "type" "int2,int4,load2,load4,load8,store2,store4,store8,shift2,shift4,mul2,div4,uncond_branch,branch,call,multi,misc" (const_string "misc")) ;; Length in bytes. (define_attr "length" "" (cond [(eq_attr "type" "int2,load2,store2,shift2,mul2") (const_int 2) (eq_attr "type" "int4,load4,store4,shift4,div4") (const_int 4) (eq_attr "type" "multi") (const_int 8) (eq_attr "type" "uncond_branch,branch,call") (const_int 4)] (const_int 4))) ;; The length here is the length of a single asm. Unfortunately it might be ;; 2 or 4 so we must allow for 4. That's ok though. (define_asm_attributes [(set_attr "length" "4") (set_attr "type" "multi")]) ;; Whether an instruction is short (16-bit) or long (32-bit). (define_attr "insn_size" "short,long" (if_then_else (eq_attr "type" "int2,load2,store2,shift2,mul2") (const_string "short") (const_string "long"))) ;; The target CPU we're compiling for. (define_attr "cpu" "m32r,m32r2,m32rx" (cond [(ne (symbol_ref "TARGET_M32RX") (const_int 0)) (const_string "m32rx") (ne (symbol_ref "TARGET_M32R2") (const_int 0)) (const_string "m32r2")] (const_string "m32r"))) ;; Defines the pipeline where an instruction can be executed on. ;; For the M32R, a short instruction can execute one of the two pipes. ;; For the M32Rx, the restrictions are modelled in the second ;; condition of this attribute definition. (define_attr "m32r_pipeline" "either,s,o,long" (cond [(and (eq_attr "cpu" "m32r") (eq_attr "insn_size" "short")) (const_string "either") (eq_attr "insn_size" "!short") (const_string "long")] (cond [(eq_attr "type" "int2") (const_string "either") (eq_attr "type" "load2,store2,shift2,uncond_branch,branch,call") (const_string "o") (eq_attr "type" "mul2") (const_string "s")] (const_string "long")))) ;; :::::::::::::::::::: ;; :: ;; :: Pipeline description ;; :: ;; :::::::::::::::::::: ;; This model is based on Chapter 2, Appendix 3 and Appendix 4 of the ;; "M32R-FPU Software Manual", Revision 1.01, plus additional information ;; obtained by our best friend and mine, Google. ;; ;; The pipeline is modelled as a fetch unit, and a core with a memory unit, ;; two execution units, where "fetch" models IF and D, "memory" for MEM1 ;; and MEM2, and "EXEC" for E, E1, E2, EM, and EA. Writeback and ;; bypasses are not modelled. (define_automaton "m32r") ;; We pretend there are two short (16 bits) instruction fetchers. The ;; "s" short fetcher cannot be reserved until the "o" short fetcher is ;; reserved. Some instructions reserve both the left and right fetchers. ;; These fetch units are a hack to get GCC to better pack the instructions ;; for the M32Rx processor, which has two execution pipes. ;; ;; In reality there is only one decoder, which can decode either two 16 bits ;; instructions, or a single 32 bits instruction. ;; ;; Note, "fetch" models both the IF and the D pipeline stages. ;; ;; The m32rx core has two execution pipes. We name them o_E and s_E. ;; In addition, there's a memory unit. (define_cpu_unit "o_IF,s_IF,o_E,s_E,memory" "m32r") ;; Prevent the s pipe from being reserved before the o pipe. (absence_set "s_IF" "o_IF") (absence_set "s_E" "o_E") ;; On the M32Rx, long instructions execute on both pipes, so reserve ;; both fetch slots and both pipes. (define_reservation "long_IF" "o_IF+s_IF") (define_reservation "long_E" "o_E+s_E") ;; :::::::::::::::::::: ;; Simple instructions do 4 stages: IF D E WB. WB is not modelled. ;; Hence, ready latency is 1. (define_insn_reservation "short_left" 1 (and (eq_attr "m32r_pipeline" "o") (and (eq_attr "insn_size" "short") (eq_attr "type" "!load2"))) "o_IF,o_E") (define_insn_reservation "short_right" 1 (and (eq_attr "m32r_pipeline" "s") (and (eq_attr "insn_size" "short") (eq_attr "type" "!load2"))) "s_IF,s_E") (define_insn_reservation "short_either" 1 (and (eq_attr "m32r_pipeline" "either") (and (eq_attr "insn_size" "short") (eq_attr "type" "!load2"))) "o_IF|s_IF,o_E|s_E") (define_insn_reservation "long_m32r" 1 (and (eq_attr "cpu" "m32r") (and (eq_attr "insn_size" "long") (eq_attr "type" "!load4,load8"))) "long_IF,long_E") (define_insn_reservation "long_m32rx" 2 (and (eq_attr "m32r_pipeline" "long") (and (eq_attr "insn_size" "long") (eq_attr "type" "!load4,load8"))) "long_IF,long_E") ;; Load/store instructions do 6 stages: IF D E MEM1 MEM2 WB. ;; MEM1 may require more than one cycle depending on locality. We ;; optimistically assume all memory is nearby, i.e. MEM1 takes only ;; one cycle. Hence, ready latency is 3. ;; The M32Rx can do short load/store only on the left pipe. (define_insn_reservation "short_load_left" 3 (and (eq_attr "m32r_pipeline" "o") (and (eq_attr "insn_size" "short") (eq_attr "type" "load2"))) "o_IF,o_E,memory*2") (define_insn_reservation "short_load" 3 (and (eq_attr "m32r_pipeline" "either") (and (eq_attr "insn_size" "short") (eq_attr "type" "load2"))) "s_IF|o_IF,s_E|o_E,memory*2") (define_insn_reservation "long_load" 3 (and (eq_attr "cpu" "m32r") (and (eq_attr "insn_size" "long") (eq_attr "type" "load4,load8"))) "long_IF,long_E,memory*2") (define_insn_reservation "long_load_m32rx" 3 (and (eq_attr "m32r_pipeline" "long") (eq_attr "type" "load4,load8")) "long_IF,long_E,memory*2") ;; Expand prologue as RTL (define_expand "prologue" [(const_int 1)] "" " { m32r_expand_prologue (); DONE; }") ;; Move instructions. ;; ;; For QI and HI moves, the register must contain the full properly ;; sign-extended value. nonzero_bits assumes this [otherwise ;; SHORT_IMMEDIATES_SIGN_EXTEND must be used, but the comment for it ;; says it's a kludge and the .md files should be fixed instead]. (define_expand "movqi" [(set (match_operand:QI 0 "general_operand" "") (match_operand:QI 1 "general_operand" ""))] "" " { /* Fixup PIC cases. */ if (flag_pic) { if (symbolic_operand (operands[1], QImode)) { if (reload_in_progress || reload_completed) operands[1] = m32r_legitimize_pic_address (operands[1], operands[0]); else operands[1] = m32r_legitimize_pic_address (operands[1], NULL_RTX); } } /* Everything except mem = const or mem = mem can be done easily. Objects in the small data area are handled too. */ if (GET_CODE (operands[0]) == MEM) operands[1] = force_reg (QImode, operands[1]); }") (define_insn "*movqi_insn" [(set (match_operand:QI 0 "move_dest_operand" "=r,r,r,r,r,T,m") (match_operand:QI 1 "move_src_operand" "r,I,JQR,T,m,r,r"))] "register_operand (operands[0], QImode) || register_operand (operands[1], QImode)" "@ mv %0,%1 ldi %0,%#%1 ldi %0,%#%1 ldub %0,%1 ldub %0,%1 stb %1,%0 stb %1,%0" [(set_attr "type" "int2,int2,int4,load2,load4,store2,store4") (set_attr "length" "2,2,4,2,4,2,4")]) (define_expand "movhi" [(set (match_operand:HI 0 "general_operand" "") (match_operand:HI 1 "general_operand" ""))] "" " { /* Fixup PIC cases. */ if (flag_pic) { if (symbolic_operand (operands[1], HImode)) { if (reload_in_progress || reload_completed) operands[1] = m32r_legitimize_pic_address (operands[1], operands[0]); else operands[1] = m32r_legitimize_pic_address (operands[1], NULL_RTX); } } /* Everything except mem = const or mem = mem can be done easily. */ if (GET_CODE (operands[0]) == MEM) operands[1] = force_reg (HImode, operands[1]); }") (define_insn "*movhi_insn" [(set (match_operand:HI 0 "move_dest_operand" "=r,r,r,r,r,r,T,m") (match_operand:HI 1 "move_src_operand" "r,I,JQR,K,T,m,r,r"))] "register_operand (operands[0], HImode) || register_operand (operands[1], HImode)" "@ mv %0,%1 ldi %0,%#%1 ldi %0,%#%1 ld24 %0,%#%1 lduh %0,%1 lduh %0,%1 sth %1,%0 sth %1,%0" [(set_attr "type" "int2,int2,int4,int4,load2,load4,store2,store4") (set_attr "length" "2,2,4,4,2,4,2,4")]) (define_expand "movsi_push" [(set (mem:SI (pre_dec:SI (match_operand:SI 0 "register_operand" ""))) (match_operand:SI 1 "register_operand" ""))] "" "") (define_expand "movsi_pop" [(set (match_operand:SI 0 "register_operand" "") (mem:SI (post_inc:SI (match_operand:SI 1 "register_operand" ""))))] "" "") (define_expand "movsi" [(set (match_operand:SI 0 "general_operand" "") (match_operand:SI 1 "general_operand" ""))] "" " { /* Fixup PIC cases. */ if (flag_pic) { if (symbolic_operand (operands[1], SImode)) { if (reload_in_progress || reload_completed) operands[1] = m32r_legitimize_pic_address (operands[1], operands[0]); else operands[1] = m32r_legitimize_pic_address (operands[1], NULL_RTX); } } /* Everything except mem = const or mem = mem can be done easily. */ if (GET_CODE (operands[0]) == MEM) operands[1] = force_reg (SImode, operands[1]); /* Small Data Area reference? */ if (small_data_operand (operands[1], SImode)) { emit_insn (gen_movsi_sda (operands[0], operands[1])); DONE; } /* If medium or large code model, symbols have to be loaded with seth/add3. */ if (addr32_operand (operands[1], SImode)) { emit_insn (gen_movsi_addr32 (operands[0], operands[1])); DONE; } }") ;; ??? Do we need a const_double constraint here for large unsigned values? (define_insn "*movsi_insn" [(set (match_operand:SI 0 "move_dest_operand" "=r,r,r,r,r,r,r,r,r,T,S,m") (match_operand:SI 1 "move_src_operand" "r,I,J,MQ,L,n,T,U,m,r,r,r"))] "register_operand (operands[0], SImode) || register_operand (operands[1], SImode)" "* { if (GET_CODE (operands[0]) == REG || GET_CODE (operands[1]) == SUBREG) { switch (GET_CODE (operands[1])) { HOST_WIDE_INT value; default: break; case REG: case SUBREG: return \"mv %0,%1\"; case MEM: if (GET_CODE (XEXP (operands[1], 0)) == POST_INC && XEXP (XEXP (operands[1], 0), 0) == stack_pointer_rtx) return \"pop %0\"; return \"ld %0,%1\"; case CONST_INT: value = INTVAL (operands[1]); if (INT16_P (value)) return \"ldi %0,%#%1\\t; %X1\"; if (UINT24_P (value)) return \"ld24 %0,%#%1\\t; %X1\"; if (UPPER16_P (value)) return \"seth %0,%#%T1\\t; %X1\"; return \"#\"; case CONST: case SYMBOL_REF: case LABEL_REF: if (TARGET_ADDR24) return \"ld24 %0,%#%1\"; return \"#\"; } } else if (GET_CODE (operands[0]) == MEM && (GET_CODE (operands[1]) == REG || GET_CODE (operands[1]) == SUBREG)) { if (GET_CODE (XEXP (operands[0], 0)) == PRE_DEC && XEXP (XEXP (operands[0], 0), 0) == stack_pointer_rtx) return \"push %1\"; return \"st %1,%0\"; } abort (); }" [(set_attr "type" "int2,int2,int4,int4,int4,multi,load2,load2,load4,store2,store2,store4") (set_attr "length" "2,2,4,4,4,8,2,2,4,2,2,4")]) ; Try to use a four byte / two byte pair for constants not loadable with ; ldi, ld24, seth. (define_split [(set (match_operand:SI 0 "register_operand" "") (match_operand:SI 1 "two_insn_const_operand" ""))] "" [(set (match_dup 0) (match_dup 2)) (set (match_dup 0) (ior:SI (match_dup 0) (match_dup 3)))] " { unsigned HOST_WIDE_INT val = INTVAL (operands[1]); unsigned HOST_WIDE_INT tmp; int shift; /* In all cases we will emit two instructions. However we try to use 2 byte instructions wherever possible. We can assume the constant isn't loadable with any of ldi, ld24, or seth. */ /* See if we can load a 24 bit unsigned value and invert it. */ if (UINT24_P (~ val)) { emit_insn (gen_movsi (operands[0], GEN_INT (~ val))); emit_insn (gen_one_cmplsi2 (operands[0], operands[0])); DONE; } /* See if we can load a 24 bit unsigned value and shift it into place. 0x01fffffe is just beyond ld24's range. */ for (shift = 1, tmp = 0x01fffffe; shift < 8; ++shift, tmp <<= 1) { if ((val & ~tmp) == 0) { emit_insn (gen_movsi (operands[0], GEN_INT (val >> shift))); emit_insn (gen_ashlsi3 (operands[0], operands[0], GEN_INT (shift))); DONE; } } /* Can't use any two byte insn, fall back to seth/or3. Use ~0xffff instead of 0xffff0000, since the later fails on a 64-bit host. */ operands[2] = GEN_INT ((val) & ~0xffff); operands[3] = GEN_INT ((val) & 0xffff); }") (define_split [(set (match_operand:SI 0 "register_operand" "") (match_operand:SI 1 "seth_add3_operand" ""))] "TARGET_ADDR32" [(set (match_dup 0) (high:SI (match_dup 1))) (set (match_dup 0) (lo_sum:SI (match_dup 0) (match_dup 1)))] "") ;; Small data area support. ;; The address of _SDA_BASE_ is loaded into a register and all objects in ;; the small data area are indexed off that. This is done for each reference ;; but cse will clean things up for us. We let the compiler choose the ;; register to use so we needn't allocate (and maybe even fix) a special ;; register to use. Since the load and store insns have a 16 bit offset the ;; total size of the data area can be 64K. However, if the data area lives ;; above 16M (24 bits), _SDA_BASE_ will have to be loaded with seth/add3 which ;; would then yield 3 instructions to reference an object [though there would ;; be no net loss if two or more objects were referenced]. The 3 insns can be ;; reduced back to 2 if the size of the small data area were reduced to 32K ;; [then seth + ld/st would work for any object in the area]. Doing this ;; would require special handling of _SDA_BASE_ (its value would be ;; (.sdata + 32K) & 0xffff0000) and reloc computations would be different ;; [I think]. What to do about this is deferred until later and for now we ;; require .sdata to be in the first 16M. (define_expand "movsi_sda" [(set (match_dup 2) (unspec:SI [(const_int 0)] UNSPEC_LOAD_SDA_BASE)) (set (match_operand:SI 0 "register_operand" "") (lo_sum:SI (match_dup 2) (match_operand:SI 1 "small_data_operand" "")))] "" " { if (reload_in_progress || reload_completed) operands[2] = operands[0]; else operands[2] = gen_reg_rtx (SImode); }") (define_insn "*load_sda_base" [(set (match_operand:SI 0 "register_operand" "=r") (unspec:SI [(const_int 0)] UNSPEC_LOAD_SDA_BASE))] "" "ld24 %0,#_SDA_BASE_" [(set_attr "type" "int4") (set_attr "length" "4")]) ;; 32 bit address support. (define_expand "movsi_addr32" [(set (match_dup 2) ; addr32_operand isn't used because it's too restrictive, ; seth_add3_operand is more general and thus safer. (high:SI (match_operand:SI 1 "seth_add3_operand" ""))) (set (match_operand:SI 0 "register_operand" "") (lo_sum:SI (match_dup 2) (match_dup 1)))] "" " { if (reload_in_progress || reload_completed) operands[2] = operands[0]; else operands[2] = gen_reg_rtx (SImode); }") (define_insn "set_hi_si" [(set (match_operand:SI 0 "register_operand" "=r") (high:SI (match_operand 1 "symbolic_operand" "")))] "" "seth %0,%#shigh(%1)" [(set_attr "type" "int4") (set_attr "length" "4")]) (define_insn "lo_sum_si" [(set (match_operand:SI 0 "register_operand" "=r") (lo_sum:SI (match_operand:SI 1 "register_operand" "r") (match_operand:SI 2 "immediate_operand" "in")))] "" "add3 %0,%1,%#%B2" [(set_attr "type" "int4") (set_attr "length" "4")]) (define_expand "movdi" [(set (match_operand:DI 0 "general_operand" "") (match_operand:DI 1 "general_operand" ""))] "" " { /* Fixup PIC cases. */ if (flag_pic) { if (symbolic_operand (operands[1], DImode)) { if (reload_in_progress || reload_completed) operands[1] = m32r_legitimize_pic_address (operands[1], operands[0]); else operands[1] = m32r_legitimize_pic_address (operands[1], NULL_RTX); } } /* Everything except mem = const or mem = mem can be done easily. */ if (GET_CODE (operands[0]) == MEM) operands[1] = force_reg (DImode, operands[1]); }") (define_insn "*movdi_insn" [(set (match_operand:DI 0 "move_dest_operand" "=r,r,r,r,m") (match_operand:DI 1 "move_double_src_operand" "r,nG,F,m,r"))] "register_operand (operands[0], DImode) || register_operand (operands[1], DImode)" "#" [(set_attr "type" "multi,multi,multi,load8,store8") (set_attr "length" "4,4,16,6,6")]) (define_split [(set (match_operand:DI 0 "move_dest_operand" "") (match_operand:DI 1 "move_double_src_operand" ""))] "reload_completed" [(match_dup 2)] "operands[2] = gen_split_move_double (operands);") ;; Floating point move insns. (define_expand "movsf" [(set (match_operand:SF 0 "general_operand" "") (match_operand:SF 1 "general_operand" ""))] "" " { /* Fixup PIC cases. */ if (flag_pic) { if (symbolic_operand (operands[1], SFmode)) { if (reload_in_progress || reload_completed) operands[1] = m32r_legitimize_pic_address (operands[1], operands[0]); else operands[1] = m32r_legitimize_pic_address (operands[1], NULL_RTX); } } /* Everything except mem = const or mem = mem can be done easily. */ if (GET_CODE (operands[0]) == MEM) operands[1] = force_reg (SFmode, operands[1]); }") (define_insn "*movsf_insn" [(set (match_operand:SF 0 "move_dest_operand" "=r,r,r,r,r,T,S,m") (match_operand:SF 1 "move_src_operand" "r,F,U,S,m,r,r,r"))] "register_operand (operands[0], SFmode) || register_operand (operands[1], SFmode)" "@ mv %0,%1 # ld %0,%1 ld %0,%1 ld %0,%1 st %1,%0 st %1,%0 st %1,%0" ;; ??? Length of alternative 1 is either 2, 4 or 8. [(set_attr "type" "int2,multi,load2,load2,load4,store2,store2,store4") (set_attr "length" "2,8,2,2,4,2,2,4")]) (define_split [(set (match_operand:SF 0 "register_operand" "") (match_operand:SF 1 "const_double_operand" ""))] "reload_completed" [(set (match_dup 2) (match_dup 3))] " { operands[2] = operand_subword (operands[0], 0, 0, SFmode); operands[3] = operand_subword (operands[1], 0, 0, SFmode); }") (define_expand "movdf" [(set (match_operand:DF 0 "general_operand" "") (match_operand:DF 1 "general_operand" ""))] "" " { /* Fixup PIC cases. */ if (flag_pic) { if (symbolic_operand (operands[1], DFmode)) { if (reload_in_progress || reload_completed) operands[1] = m32r_legitimize_pic_address (operands[1], operands[0]); else operands[1] = m32r_legitimize_pic_address (operands[1], NULL_RTX); } } /* Everything except mem = const or mem = mem can be done easily. */ if (GET_CODE (operands[0]) == MEM) operands[1] = force_reg (DFmode, operands[1]); }") (define_insn "*movdf_insn" [(set (match_operand:DF 0 "move_dest_operand" "=r,r,r,m") (match_operand:DF 1 "move_double_src_operand" "r,F,m,r"))] "register_operand (operands[0], DFmode) || register_operand (operands[1], DFmode)" "#" [(set_attr "type" "multi,multi,load8,store8") (set_attr "length" "4,16,6,6")]) (define_split [(set (match_operand:DF 0 "move_dest_operand" "") (match_operand:DF 1 "move_double_src_operand" ""))] "reload_completed" [(match_dup 2)] "operands[2] = gen_split_move_double (operands);") ;; Zero extension instructions. (define_insn "zero_extendqihi2" [(set (match_operand:HI 0 "register_operand" "=r,r,r") (zero_extend:HI (match_operand:QI 1 "extend_operand" "r,T,m")))] "" "@ and3 %0,%1,%#255 ldub %0,%1 ldub %0,%1" [(set_attr "type" "int4,load2,load4") (set_attr "length" "4,2,4")]) (define_insn "zero_extendqisi2" [(set (match_operand:SI 0 "register_operand" "=r,r,r") (zero_extend:SI (match_operand:QI 1 "extend_operand" "r,T,m")))] "" "@ and3 %0,%1,%#255 ldub %0,%1 ldub %0,%1" [(set_attr "type" "int4,load2,load4") (set_attr "length" "4,2,4")]) (define_insn "zero_extendhisi2" [(set (match_operand:SI 0 "register_operand" "=r,r,r") (zero_extend:SI (match_operand:HI 1 "extend_operand" "r,T,m")))] "" "@ and3 %0,%1,%#65535 lduh %0,%1 lduh %0,%1" [(set_attr "type" "int4,load2,load4") (set_attr "length" "4,2,4")]) ;; Signed conversions from a smaller integer to a larger integer (define_insn "extendqihi2" [(set (match_operand:HI 0 "register_operand" "=r,r,r") (sign_extend:HI (match_operand:QI 1 "extend_operand" "0,T,m")))] "" "@ # ldb %0,%1 ldb %0,%1" [(set_attr "type" "multi,load2,load4") (set_attr "length" "2,2,4")]) (define_split [(set (match_operand:HI 0 "register_operand" "") (sign_extend:HI (match_operand:QI 1 "register_operand" "")))] "reload_completed" [(match_dup 2) (match_dup 3)] " { rtx op0 = gen_lowpart (SImode, operands[0]); rtx shift = GEN_INT (24); operands[2] = gen_ashlsi3 (op0, op0, shift); operands[3] = gen_ashrsi3 (op0, op0, shift); }") (define_insn "extendqisi2" [(set (match_operand:SI 0 "register_operand" "=r,r,r") (sign_extend:SI (match_operand:QI 1 "extend_operand" "0,T,m")))] "" "@ # ldb %0,%1 ldb %0,%1" [(set_attr "type" "multi,load2,load4") (set_attr "length" "4,2,4")]) (define_split [(set (match_operand:SI 0 "register_operand" "") (sign_extend:SI (match_operand:QI 1 "register_operand" "")))] "reload_completed" [(match_dup 2) (match_dup 3)] " { rtx shift = GEN_INT (24); operands[2] = gen_ashlsi3 (operands[0], operands[0], shift); operands[3] = gen_ashrsi3 (operands[0], operands[0], shift); }") (define_insn "extendhisi2" [(set (match_operand:SI 0 "register_operand" "=r,r,r") (sign_extend:SI (match_operand:HI 1 "extend_operand" "0,T,m")))] "" "@ # ldh %0,%1 ldh %0,%1" [(set_attr "type" "multi,load2,load4") (set_attr "length" "4,2,4")]) (define_split [(set (match_operand:SI 0 "register_operand" "") (sign_extend:SI (match_operand:HI 1 "register_operand" "")))] "reload_completed" [(match_dup 2) (match_dup 3)] " { rtx shift = GEN_INT (16); operands[2] = gen_ashlsi3 (operands[0], operands[0], shift); operands[3] = gen_ashrsi3 (operands[0], operands[0], shift); }") ;; Arithmetic instructions. ; ??? Adding an alternative to split add3 of small constants into two ; insns yields better instruction packing but slower code. Adds of small ; values is done a lot. (define_insn "addsi3" [(set (match_operand:SI 0 "register_operand" "=r,r,r") (plus:SI (match_operand:SI 1 "register_operand" "%0,0,r") (match_operand:SI 2 "nonmemory_operand" "r,I,J")))] "" "@ add %0,%2 addi %0,%#%2 add3 %0,%1,%#%2" [(set_attr "type" "int2,int2,int4") (set_attr "length" "2,2,4")]) ;(define_split ; [(set (match_operand:SI 0 "register_operand" "") ; (plus:SI (match_operand:SI 1 "register_operand" "") ; (match_operand:SI 2 "int8_operand" "")))] ; "reload_completed ; && REGNO (operands[0]) != REGNO (operands[1]) ; && INT8_P (INTVAL (operands[2])) ; && INTVAL (operands[2]) != 0" ; [(set (match_dup 0) (match_dup 1)) ; (set (match_dup 0) (plus:SI (match_dup 0) (match_dup 2)))] ; "") (define_insn "adddi3" [(set (match_operand:DI 0 "register_operand" "=r") (plus:DI (match_operand:DI 1 "register_operand" "%0") (match_operand:DI 2 "register_operand" "r"))) (clobber (reg:CC 17))] "" "#" [(set_attr "type" "multi") (set_attr "length" "6")]) ;; ??? The cmp clears the condition bit. Can we speed up somehow? (define_split [(set (match_operand:DI 0 "register_operand" "") (plus:DI (match_operand:DI 1 "register_operand" "") (match_operand:DI 2 "register_operand" ""))) (clobber (reg:CC 17))] "reload_completed" [(parallel [(set (reg:CC 17) (const_int 0)) (use (match_dup 4))]) (parallel [(set (match_dup 4) (plus:SI (match_dup 4) (plus:SI (match_dup 5) (ne:SI (reg:CC 17) (const_int 0))))) (set (reg:CC 17) (unspec:CC [(const_int 0)] UNSPEC_SET_CBIT))]) (parallel [(set (match_dup 6) (plus:SI (match_dup 6) (plus:SI (match_dup 7) (ne:SI (reg:CC 17) (const_int 0))))) (set (reg:CC 17) (unspec:CC [(const_int 0)] UNSPEC_SET_CBIT))])] " { operands[4] = operand_subword (operands[0], (WORDS_BIG_ENDIAN != 0), 0, DImode); operands[5] = operand_subword (operands[2], (WORDS_BIG_ENDIAN != 0), 0, DImode); operands[6] = operand_subword (operands[0], (WORDS_BIG_ENDIAN == 0), 0, DImode); operands[7] = operand_subword (operands[2], (WORDS_BIG_ENDIAN == 0), 0, DImode); }") (define_insn "*clear_c" [(set (reg:CC 17) (const_int 0)) (use (match_operand:SI 0 "register_operand" "r"))] "" "cmp %0,%0" [(set_attr "type" "int2") (set_attr "length" "2")]) (define_insn "*add_carry" [(set (match_operand:SI 0 "register_operand" "=r") (plus:SI (match_operand:SI 1 "register_operand" "%0") (plus:SI (match_operand:SI 2 "register_operand" "r") (ne:SI (reg:CC 17) (const_int 0))))) (set (reg:CC 17) (unspec:CC [(const_int 0)] UNSPEC_SET_CBIT))] "" "addx %0,%2" [(set_attr "type" "int2") (set_attr "length" "2")]) (define_insn "subsi3" [(set (match_operand:SI 0 "register_operand" "=r") (minus:SI (match_operand:SI 1 "register_operand" "0") (match_operand:SI 2 "register_operand" "r")))] "" "sub %0,%2" [(set_attr "type" "int2") (set_attr "length" "2")]) (define_insn "subdi3" [(set (match_operand:DI 0 "register_operand" "=r") (minus:DI (match_operand:DI 1 "register_operand" "0") (match_operand:DI 2 "register_operand" "r"))) (clobber (reg:CC 17))] "" "#" [(set_attr "type" "multi") (set_attr "length" "6")]) ;; ??? The cmp clears the condition bit. Can we speed up somehow? (define_split [(set (match_operand:DI 0 "register_operand" "") (minus:DI (match_operand:DI 1 "register_operand" "") (match_operand:DI 2 "register_operand" ""))) (clobber (reg:CC 17))] "reload_completed" [(parallel [(set (reg:CC 17) (const_int 0)) (use (match_dup 4))]) (parallel [(set (match_dup 4) (minus:SI (match_dup 4) (minus:SI (match_dup 5) (ne:SI (reg:CC 17) (const_int 0))))) (set (reg:CC 17) (unspec:CC [(const_int 0)] UNSPEC_SET_CBIT))]) (parallel [(set (match_dup 6) (minus:SI (match_dup 6) (minus:SI (match_dup 7) (ne:SI (reg:CC 17) (const_int 0))))) (set (reg:CC 17) (unspec:CC [(const_int 0)] UNSPEC_SET_CBIT))])] " { operands[4] = operand_subword (operands[0], (WORDS_BIG_ENDIAN != 0), 0, DImode); operands[5] = operand_subword (operands[2], (WORDS_BIG_ENDIAN != 0), 0, DImode); operands[6] = operand_subword (operands[0], (WORDS_BIG_ENDIAN == 0), 0, DImode); operands[7] = operand_subword (operands[2], (WORDS_BIG_ENDIAN == 0), 0, DImode); }") (define_insn "*sub_carry" [(set (match_operand:SI 0 "register_operand" "=r") (minus:SI (match_operand:SI 1 "register_operand" "%0") (minus:SI (match_operand:SI 2 "register_operand" "r") (ne:SI (reg:CC 17) (const_int 0))))) (set (reg:CC 17) (unspec:CC [(const_int 0)] UNSPEC_SET_CBIT))] "" "subx %0,%2" [(set_attr "type" "int2") (set_attr "length" "2")]) ; Multiply/Divide instructions. (define_insn "mulhisi3" [(set (match_operand:SI 0 "register_operand" "=r") (mult:SI (sign_extend:SI (match_operand:HI 1 "register_operand" "r")) (sign_extend:SI (match_operand:HI 2 "register_operand" "r"))))] "" "mullo %1,%2\;mvfacmi %0" [(set_attr "type" "multi") (set_attr "length" "4")]) (define_insn "mulsi3" [(set (match_operand:SI 0 "register_operand" "=r") (mult:SI (match_operand:SI 1 "register_operand" "%0") (match_operand:SI 2 "register_operand" "r")))] "" "mul %0,%2" [(set_attr "type" "mul2") (set_attr "length" "2")]) (define_insn "divsi3" [(set (match_operand:SI 0 "register_operand" "=r") (div:SI (match_operand:SI 1 "register_operand" "0") (match_operand:SI 2 "register_operand" "r")))] "" "div %0,%2" [(set_attr "type" "div4") (set_attr "length" "4")]) (define_insn "udivsi3" [(set (match_operand:SI 0 "register_operand" "=r") (udiv:SI (match_operand:SI 1 "register_operand" "0") (match_operand:SI 2 "register_operand" "r")))] "" "divu %0,%2" [(set_attr "type" "div4") (set_attr "length" "4")]) (define_insn "modsi3" [(set (match_operand:SI 0 "register_operand" "=r") (mod:SI (match_operand:SI 1 "register_operand" "0") (match_operand:SI 2 "register_operand" "r")))] "" "rem %0,%2" [(set_attr "type" "div4") (set_attr "length" "4")]) (define_insn "umodsi3" [(set (match_operand:SI 0 "register_operand" "=r") (umod:SI (match_operand:SI 1 "register_operand" "0") (match_operand:SI 2 "register_operand" "r")))] "" "remu %0,%2" [(set_attr "type" "div4") (set_attr "length" "4")]) ;; Boolean instructions. ;; ;; We don't define the DImode versions as expand_binop does a good enough job. ;; And if it doesn't it should be fixed. (define_insn "andsi3" [(set (match_operand:SI 0 "register_operand" "=r,r") (and:SI (match_operand:SI 1 "register_operand" "%0,r") (match_operand:SI 2 "reg_or_uint16_operand" "r,K")))] "" "* { /* If we are worried about space, see if we can break this up into two short instructions, which might eliminate a NOP being inserted. */ if (optimize_size && m32r_not_same_reg (operands[0], operands[1]) && GET_CODE (operands[2]) == CONST_INT && INT8_P (INTVAL (operands[2]))) return \"#\"; else if (GET_CODE (operands[2]) == CONST_INT) return \"and3 %0,%1,%#%X2\"; return \"and %0,%2\"; }" [(set_attr "type" "int2,int4") (set_attr "length" "2,4")]) (define_split [(set (match_operand:SI 0 "register_operand" "") (and:SI (match_operand:SI 1 "register_operand" "") (match_operand:SI 2 "int8_operand" "")))] "optimize_size && m32r_not_same_reg (operands[0], operands[1])" [(set (match_dup 0) (match_dup 2)) (set (match_dup 0) (and:SI (match_dup 0) (match_dup 1)))] "") (define_insn "iorsi3" [(set (match_operand:SI 0 "register_operand" "=r,r") (ior:SI (match_operand:SI 1 "register_operand" "%0,r") (match_operand:SI 2 "reg_or_uint16_operand" "r,K")))] "" "* { /* If we are worried about space, see if we can break this up into two short instructions, which might eliminate a NOP being inserted. */ if (optimize_size && m32r_not_same_reg (operands[0], operands[1]) && GET_CODE (operands[2]) == CONST_INT && INT8_P (INTVAL (operands[2]))) return \"#\"; else if (GET_CODE (operands[2]) == CONST_INT) return \"or3 %0,%1,%#%X2\"; return \"or %0,%2\"; }" [(set_attr "type" "int2,int4") (set_attr "length" "2,4")]) (define_split [(set (match_operand:SI 0 "register_operand" "") (ior:SI (match_operand:SI 1 "register_operand" "") (match_operand:SI 2 "int8_operand" "")))] "optimize_size && m32r_not_same_reg (operands[0], operands[1])" [(set (match_dup 0) (match_dup 2)) (set (match_dup 0) (ior:SI (match_dup 0) (match_dup 1)))] "") (define_insn "xorsi3" [(set (match_operand:SI 0 "register_operand" "=r,r") (xor:SI (match_operand:SI 1 "register_operand" "%0,r") (match_operand:SI 2 "reg_or_uint16_operand" "r,K")))] "" "* { /* If we are worried about space, see if we can break this up into two short instructions, which might eliminate a NOP being inserted. */ if (optimize_size && m32r_not_same_reg (operands[0], operands[1]) && GET_CODE (operands[2]) == CONST_INT && INT8_P (INTVAL (operands[2]))) return \"#\"; else if (GET_CODE (operands[2]) == CONST_INT) return \"xor3 %0,%1,%#%X2\"; return \"xor %0,%2\"; }" [(set_attr "type" "int2,int4") (set_attr "length" "2,4")]) (define_split [(set (match_operand:SI 0 "register_operand" "") (xor:SI (match_operand:SI 1 "register_operand" "") (match_operand:SI 2 "int8_operand" "")))] "optimize_size && m32r_not_same_reg (operands[0], operands[1])" [(set (match_dup 0) (match_dup 2)) (set (match_dup 0) (xor:SI (match_dup 0) (match_dup 1)))] "") (define_insn "negsi2" [(set (match_operand:SI 0 "register_operand" "=r") (neg:SI (match_operand:SI 1 "register_operand" "r")))] "" "neg %0,%1" [(set_attr "type" "int2") (set_attr "length" "2")]) (define_insn "one_cmplsi2" [(set (match_operand:SI 0 "register_operand" "=r") (not:SI (match_operand:SI 1 "register_operand" "r")))] "" "not %0,%1" [(set_attr "type" "int2") (set_attr "length" "2")]) ;; Shift instructions. (define_insn "ashlsi3" [(set (match_operand:SI 0 "register_operand" "=r,r,r") (ashift:SI (match_operand:SI 1 "register_operand" "0,0,r") (match_operand:SI 2 "reg_or_uint16_operand" "r,O,K")))] "" "@ sll %0,%2 slli %0,%#%2 sll3 %0,%1,%#%2" [(set_attr "type" "shift2,shift2,shift4") (set_attr "length" "2,2,4")]) (define_insn "ashrsi3" [(set (match_operand:SI 0 "register_operand" "=r,r,r") (ashiftrt:SI (match_operand:SI 1 "register_operand" "0,0,r") (match_operand:SI 2 "reg_or_uint16_operand" "r,O,K")))] "" "@ sra %0,%2 srai %0,%#%2 sra3 %0,%1,%#%2" [(set_attr "type" "shift2,shift2,shift4") (set_attr "length" "2,2,4")]) (define_insn "lshrsi3" [(set (match_operand:SI 0 "register_operand" "=r,r,r") (lshiftrt:SI (match_operand:SI 1 "register_operand" "0,0,r") (match_operand:SI 2 "reg_or_uint16_operand" "r,O,K")))] "" "@ srl %0,%2 srli %0,%#%2 srl3 %0,%1,%#%2" [(set_attr "type" "shift2,shift2,shift4") (set_attr "length" "2,2,4")]) ;; Compare instructions. ;; This controls RTL generation and register allocation. ;; We generate RTL for comparisons and branches by having the cmpxx ;; patterns store away the operands. Then the bcc patterns ;; emit RTL for both the compare and the branch. ;; ;; On the m32r it is more efficient to use the bxxz instructions and ;; thus merge the compare and branch into one instruction, so they are ;; preferred. (define_expand "cmpsi" [(set (reg:CC 17) (compare:CC (match_operand:SI 0 "register_operand" "") (match_operand:SI 1 "reg_or_cmp_int16_operand" "")))] "" " { m32r_compare_op0 = operands[0]; m32r_compare_op1 = operands[1]; DONE; }") (define_insn "cmp_eqsi_zero_insn" [(set (reg:CC 17) (eq:CC (match_operand:SI 0 "register_operand" "r,r") (match_operand:SI 1 "reg_or_zero_operand" "r,P")))] "TARGET_M32RX || TARGET_M32R2" "@ cmpeq %0, %1 cmpz %0" [(set_attr "type" "int4") (set_attr "length" "4")]) ;; The cmp_xxx_insn patterns set the condition bit to the result of the ;; comparison. There isn't a "compare equal" instruction so cmp_eqsi_insn ;; is quite inefficient. However, it is rarely used. (define_insn "cmp_eqsi_insn" [(set (reg:CC 17) (eq:CC (match_operand:SI 0 "register_operand" "r,r") (match_operand:SI 1 "reg_or_cmp_int16_operand" "r,P"))) (clobber (match_scratch:SI 2 "=&r,&r"))] "" "* { if (which_alternative == 0) { return \"mv %2,%0\;sub %2,%1\;cmpui %2,#1\"; } else { if (INTVAL (operands [1]) == 0) return \"cmpui %0, #1\"; else if (REGNO (operands [2]) == REGNO (operands [0])) return \"addi %0,%#%N1\;cmpui %2,#1\"; else return \"add3 %2,%0,%#%N1\;cmpui %2,#1\"; } }" [(set_attr "type" "multi,multi") (set_attr "length" "8,8")]) (define_insn "cmp_ltsi_insn" [(set (reg:CC 17) (lt:CC (match_operand:SI 0 "register_operand" "r,r") (match_operand:SI 1 "reg_or_int16_operand" "r,J")))] "" "@ cmp %0,%1 cmpi %0,%#%1" [(set_attr "type" "int2,int4") (set_attr "length" "2,4")]) (define_insn "cmp_ltusi_insn" [(set (reg:CC 17) (ltu:CC (match_operand:SI 0 "register_operand" "r,r") (match_operand:SI 1 "reg_or_int16_operand" "r,J")))] "" "@ cmpu %0,%1 cmpui %0,%#%1" [(set_attr "type" "int2,int4") (set_attr "length" "2,4")]) ;; These control RTL generation for conditional jump insns. (define_expand "beq" [(set (pc) (if_then_else (match_dup 1) (label_ref (match_operand 0 "" "")) (pc)))] "" " { operands[1] = gen_compare (EQ, m32r_compare_op0, m32r_compare_op1, FALSE); }") (define_expand "bne" [(set (pc) (if_then_else (match_dup 1) (label_ref (match_operand 0 "" "")) (pc)))] "" " { operands[1] = gen_compare (NE, m32r_compare_op0, m32r_compare_op1, FALSE); }") (define_expand "bgt" [(set (pc) (if_then_else (match_dup 1) (label_ref (match_operand 0 "" "")) (pc)))] "" " { operands[1] = gen_compare (GT, m32r_compare_op0, m32r_compare_op1, FALSE); }") (define_expand "ble" [(set (pc) (if_then_else (match_dup 1) (label_ref (match_operand 0 "" "")) (pc)))] "" " { operands[1] = gen_compare (LE, m32r_compare_op0, m32r_compare_op1, FALSE); }") (define_expand "bge" [(set (pc) (if_then_else (match_dup 1) (label_ref (match_operand 0 "" "")) (pc)))] "" " { operands[1] = gen_compare (GE, m32r_compare_op0, m32r_compare_op1, FALSE); }") (define_expand "blt" [(set (pc) (if_then_else (match_dup 1) (label_ref (match_operand 0 "" "")) (pc)))] "" " { operands[1] = gen_compare (LT, m32r_compare_op0, m32r_compare_op1, FALSE); }") (define_expand "bgtu" [(set (pc) (if_then_else (match_dup 1) (label_ref (match_operand 0 "" "")) (pc)))] "" " { operands[1] = gen_compare (GTU, m32r_compare_op0, m32r_compare_op1, FALSE); }") (define_expand "bleu" [(set (pc) (if_then_else (match_dup 1) (label_ref (match_operand 0 "" "")) (pc)))] "" " { operands[1] = gen_compare (LEU, m32r_compare_op0, m32r_compare_op1, FALSE); }") (define_expand "bgeu" [(set (pc) (if_then_else (match_dup 1) (label_ref (match_operand 0 "" "")) (pc)))] "" " { operands[1] = gen_compare (GEU, m32r_compare_op0, m32r_compare_op1, FALSE); }") (define_expand "bltu" [(set (pc) (if_then_else (match_dup 1) (label_ref (match_operand 0 "" "")) (pc)))] "" " { operands[1] = gen_compare (LTU, m32r_compare_op0, m32r_compare_op1, FALSE); }") ;; Now match both normal and inverted jump. (define_insn "*branch_insn" [(set (pc) (if_then_else (match_operator 1 "eqne_comparison_operator" [(reg 17) (const_int 0)]) (label_ref (match_operand 0 "" "")) (pc)))] "" "* { static char instruction[40]; sprintf (instruction, \"%s%s %%l0\", (GET_CODE (operands[1]) == NE) ? \"bc\" : \"bnc\", (get_attr_length (insn) == 2) ? \".s\" : \"\"); return instruction; }" [(set_attr "type" "branch") ; We use 400/800 instead of 512,1024 to account for inaccurate insn ; lengths and insn alignments that are complex to track. ; It's not important that we be hyper-precise here. It may be more ; important blah blah blah when the chip supports parallel execution ; blah blah blah but until then blah blah blah this is simple and ; suffices. (set (attr "length") (if_then_else (ltu (plus (minus (match_dup 0) (pc)) (const_int 400)) (const_int 800)) (const_int 2) (const_int 4)))]) (define_insn "*rev_branch_insn" [(set (pc) (if_then_else (match_operator 1 "eqne_comparison_operator" [(reg 17) (const_int 0)]) (pc) (label_ref (match_operand 0 "" ""))))] ;"REVERSIBLE_CC_MODE (GET_MODE (XEXP (operands[1], 0)))" "" "* { static char instruction[40]; sprintf (instruction, \"%s%s %%l0\", (GET_CODE (operands[1]) == EQ) ? \"bc\" : \"bnc\", (get_attr_length (insn) == 2) ? \".s\" : \"\"); return instruction; }" [(set_attr "type" "branch") ; We use 400/800 instead of 512,1024 to account for inaccurate insn ; lengths and insn alignments that are complex to track. ; It's not important that we be hyper-precise here. It may be more ; important blah blah blah when the chip supports parallel execution ; blah blah blah but until then blah blah blah this is simple and ; suffices. (set (attr "length") (if_then_else (ltu (plus (minus (match_dup 0) (pc)) (const_int 400)) (const_int 800)) (const_int 2) (const_int 4)))]) ; reg/reg compare and branch insns (define_insn "*reg_branch_insn" [(set (pc) (if_then_else (match_operator 1 "eqne_comparison_operator" [(match_operand:SI 2 "register_operand" "r") (match_operand:SI 3 "register_operand" "r")]) (label_ref (match_operand 0 "" "")) (pc)))] "" "* { /* Is branch target reachable with beq/bne? */ if (get_attr_length (insn) == 4) { if (GET_CODE (operands[1]) == EQ) return \"beq %2,%3,%l0\"; else return \"bne %2,%3,%l0\"; } else { if (GET_CODE (operands[1]) == EQ) return \"bne %2,%3,1f\;bra %l0\;1:\"; else return \"beq %2,%3,1f\;bra %l0\;1:\"; } }" [(set_attr "type" "branch") ; We use 25000/50000 instead of 32768/65536 to account for slot filling ; which is complex to track and inaccurate length specs. (set (attr "length") (if_then_else (ltu (plus (minus (match_dup 0) (pc)) (const_int 25000)) (const_int 50000)) (const_int 4) (const_int 8)))]) (define_insn "*rev_reg_branch_insn" [(set (pc) (if_then_else (match_operator 1 "eqne_comparison_operator" [(match_operand:SI 2 "register_operand" "r") (match_operand:SI 3 "register_operand" "r")]) (pc) (label_ref (match_operand 0 "" ""))))] "" "* { /* Is branch target reachable with beq/bne? */ if (get_attr_length (insn) == 4) { if (GET_CODE (operands[1]) == NE) return \"beq %2,%3,%l0\"; else return \"bne %2,%3,%l0\"; } else { if (GET_CODE (operands[1]) == NE) return \"bne %2,%3,1f\;bra %l0\;1:\"; else return \"beq %2,%3,1f\;bra %l0\;1:\"; } }" [(set_attr "type" "branch") ; We use 25000/50000 instead of 32768/65536 to account for slot filling ; which is complex to track and inaccurate length specs. (set (attr "length") (if_then_else (ltu (plus (minus (match_dup 0) (pc)) (const_int 25000)) (const_int 50000)) (const_int 4) (const_int 8)))]) ; reg/zero compare and branch insns (define_insn "*zero_branch_insn" [(set (pc) (if_then_else (match_operator 1 "signed_comparison_operator" [(match_operand:SI 2 "register_operand" "r") (const_int 0)]) (label_ref (match_operand 0 "" "")) (pc)))] "" "* { const char *br,*invbr; char asmtext[40]; switch (GET_CODE (operands[1])) { case EQ : br = \"eq\"; invbr = \"ne\"; break; case NE : br = \"ne\"; invbr = \"eq\"; break; case LE : br = \"le\"; invbr = \"gt\"; break; case GT : br = \"gt\"; invbr = \"le\"; break; case LT : br = \"lt\"; invbr = \"ge\"; break; case GE : br = \"ge\"; invbr = \"lt\"; break; default: abort(); } /* Is branch target reachable with bxxz? */ if (get_attr_length (insn) == 4) { sprintf (asmtext, \"b%sz %%2,%%l0\", br); output_asm_insn (asmtext, operands); } else { sprintf (asmtext, \"b%sz %%2,1f\;bra %%l0\;1:\", invbr); output_asm_insn (asmtext, operands); } return \"\"; }" [(set_attr "type" "branch") ; We use 25000/50000 instead of 32768/65536 to account for slot filling ; which is complex to track and inaccurate length specs. (set (attr "length") (if_then_else (ltu (plus (minus (match_dup 0) (pc)) (const_int 25000)) (const_int 50000)) (const_int 4) (const_int 8)))]) (define_insn "*rev_zero_branch_insn" [(set (pc) (if_then_else (match_operator 1 "eqne_comparison_operator" [(match_operand:SI 2 "register_operand" "r") (const_int 0)]) (pc) (label_ref (match_operand 0 "" ""))))] "" "* { const char *br,*invbr; char asmtext[40]; switch (GET_CODE (operands[1])) { case EQ : br = \"eq\"; invbr = \"ne\"; break; case NE : br = \"ne\"; invbr = \"eq\"; break; case LE : br = \"le\"; invbr = \"gt\"; break; case GT : br = \"gt\"; invbr = \"le\"; break; case LT : br = \"lt\"; invbr = \"ge\"; break; case GE : br = \"ge\"; invbr = \"lt\"; break; default: abort(); } /* Is branch target reachable with bxxz? */ if (get_attr_length (insn) == 4) { sprintf (asmtext, \"b%sz %%2,%%l0\", invbr); output_asm_insn (asmtext, operands); } else { sprintf (asmtext, \"b%sz %%2,1f\;bra %%l0\;1:\", br); output_asm_insn (asmtext, operands); } return \"\"; }" [(set_attr "type" "branch") ; We use 25000/50000 instead of 32768/65536 to account for slot filling ; which is complex to track and inaccurate length specs. (set (attr "length") (if_then_else (ltu (plus (minus (match_dup 0) (pc)) (const_int 25000)) (const_int 50000)) (const_int 4) (const_int 8)))]) ;; S operations to set a register to 1/0 based on a comparison (define_expand "seq" [(match_operand:SI 0 "register_operand" "")] "" " { rtx op0 = operands[0]; rtx op1 = m32r_compare_op0; rtx op2 = m32r_compare_op1; enum machine_mode mode = GET_MODE (op0); if (mode != SImode) FAIL; if (! register_operand (op1, mode)) op1 = force_reg (mode, op1); if (TARGET_M32RX || TARGET_M32R2) { if (! reg_or_zero_operand (op2, mode)) op2 = force_reg (mode, op2); emit_insn (gen_seq_insn_m32rx (op0, op1, op2)); DONE; } if (GET_CODE (op2) == CONST_INT && INTVAL (op2) == 0) { emit_insn (gen_seq_zero_insn (op0, op1)); DONE; } if (! reg_or_eq_int16_operand (op2, mode)) op2 = force_reg (mode, op2); emit_insn (gen_seq_insn (op0, op1, op2)); DONE; }") (define_insn "seq_insn_m32rx" [(set (match_operand:SI 0 "register_operand" "=r") (eq:SI (match_operand:SI 1 "register_operand" "%r") (match_operand:SI 2 "reg_or_zero_operand" "rP"))) (clobber (reg:CC 17))] "TARGET_M32RX || TARGET_M32R2" "#" [(set_attr "type" "multi") (set_attr "length" "6")]) (define_split [(set (match_operand:SI 0 "register_operand" "") (eq:SI (match_operand:SI 1 "register_operand" "") (match_operand:SI 2 "reg_or_zero_operand" ""))) (clobber (reg:CC 17))] "TARGET_M32RX || TARGET_M32R2" [(set (reg:CC 17) (eq:CC (match_dup 1) (match_dup 2))) (set (match_dup 0) (ne:SI (reg:CC 17) (const_int 0)))] "") (define_insn "seq_zero_insn" [(set (match_operand:SI 0 "register_operand" "=r") (eq:SI (match_operand:SI 1 "register_operand" "r") (const_int 0))) (clobber (reg:CC 17))] "TARGET_M32R" "#" [(set_attr "type" "multi") (set_attr "length" "6")]) (define_split [(set (match_operand:SI 0 "register_operand" "") (eq:SI (match_operand:SI 1 "register_operand" "") (const_int 0))) (clobber (reg:CC 17))] "TARGET_M32R" [(match_dup 3)] " { rtx op0 = operands[0]; rtx op1 = operands[1]; start_sequence (); emit_insn (gen_cmp_ltusi_insn (op1, const1_rtx)); emit_insn (gen_movcc_insn (op0)); operands[3] = get_insns (); end_sequence (); }") (define_insn "seq_insn" [(set (match_operand:SI 0 "register_operand" "=r,r,??r,r") (eq:SI (match_operand:SI 1 "register_operand" "r,r,r,r") (match_operand:SI 2 "reg_or_eq_int16_operand" "r,r,r,PK"))) (clobber (reg:CC 17)) (clobber (match_scratch:SI 3 "=1,2,&r,r"))] "TARGET_M32R" "#" [(set_attr "type" "multi") (set_attr "length" "8,8,10,10")]) (define_split [(set (match_operand:SI 0 "register_operand" "") (eq:SI (match_operand:SI 1 "register_operand" "") (match_operand:SI 2 "reg_or_eq_int16_operand" ""))) (clobber (reg:CC 17)) (clobber (match_scratch:SI 3 ""))] "TARGET_M32R && reload_completed" [(match_dup 4)] " { rtx op0 = operands[0]; rtx op1 = operands[1]; rtx op2 = operands[2]; rtx op3 = operands[3]; HOST_WIDE_INT value; if (GET_CODE (op2) == REG && GET_CODE (op3) == REG && REGNO (op2) == REGNO (op3)) { op1 = operands[2]; op2 = operands[1]; } start_sequence (); if (GET_CODE (op1) == REG && GET_CODE (op3) == REG && REGNO (op1) != REGNO (op3)) { emit_move_insn (op3, op1); op1 = op3; } if (GET_CODE (op2) == CONST_INT && (value = INTVAL (op2)) != 0 && CMP_INT16_P (value)) emit_insn (gen_addsi3 (op3, op1, GEN_INT (-value))); else emit_insn (gen_xorsi3 (op3, op1, op2)); emit_insn (gen_cmp_ltusi_insn (op3, const1_rtx)); emit_insn (gen_movcc_insn (op0)); operands[4] = get_insns (); end_sequence (); }") (define_expand "sne" [(match_operand:SI 0 "register_operand" "")] "" " { rtx op0 = operands[0]; rtx op1 = m32r_compare_op0; rtx op2 = m32r_compare_op1; enum machine_mode mode = GET_MODE (op0); if (mode != SImode) FAIL; if (GET_CODE (op2) != CONST_INT || (INTVAL (op2) != 0 && UINT16_P (INTVAL (op2)))) { rtx reg; if (reload_completed || reload_in_progress) FAIL; reg = gen_reg_rtx (SImode); emit_insn (gen_xorsi3 (reg, op1, op2)); op1 = reg; if (! register_operand (op1, mode)) op1 = force_reg (mode, op1); emit_insn (gen_sne_zero_insn (op0, op1)); DONE; } else FAIL; }") (define_insn "sne_zero_insn" [(set (match_operand:SI 0 "register_operand" "=r") (ne:SI (match_operand:SI 1 "register_operand" "r") (const_int 0))) (clobber (reg:CC 17)) (clobber (match_scratch:SI 2 "=&r"))] "" "#" [(set_attr "type" "multi") (set_attr "length" "6")]) (define_split [(set (match_operand:SI 0 "register_operand" "") (ne:SI (match_operand:SI 1 "register_operand" "") (const_int 0))) (clobber (reg:CC 17)) (clobber (match_scratch:SI 2 ""))] "reload_completed" [(set (match_dup 2) (const_int 0)) (set (reg:CC 17) (ltu:CC (match_dup 2) (match_dup 1))) (set (match_dup 0) (ne:SI (reg:CC 17) (const_int 0)))] "") (define_expand "slt" [(match_operand:SI 0 "register_operand" "")] "" " { rtx op0 = operands[0]; rtx op1 = m32r_compare_op0; rtx op2 = m32r_compare_op1; enum machine_mode mode = GET_MODE (op0); if (mode != SImode) FAIL; if (! register_operand (op1, mode)) op1 = force_reg (mode, op1); if (! reg_or_int16_operand (op2, mode)) op2 = force_reg (mode, op2); emit_insn (gen_slt_insn (op0, op1, op2)); DONE; }") (define_insn "slt_insn" [(set (match_operand:SI 0 "register_operand" "=r,r") (lt:SI (match_operand:SI 1 "register_operand" "r,r") (match_operand:SI 2 "reg_or_int16_operand" "r,J"))) (clobber (reg:CC 17))] "" "#" [(set_attr "type" "multi") (set_attr "length" "4,6")]) (define_split [(set (match_operand:SI 0 "register_operand" "") (lt:SI (match_operand:SI 1 "register_operand" "") (match_operand:SI 2 "reg_or_int16_operand" ""))) (clobber (reg:CC 17))] "" [(set (reg:CC 17) (lt:CC (match_dup 1) (match_dup 2))) (set (match_dup 0) (ne:SI (reg:CC 17) (const_int 0)))] "") (define_expand "sle" [(match_operand:SI 0 "register_operand" "")] "" " { rtx op0 = operands[0]; rtx op1 = m32r_compare_op0; rtx op2 = m32r_compare_op1; enum machine_mode mode = GET_MODE (op0); if (mode != SImode) FAIL; if (! register_operand (op1, mode)) op1 = force_reg (mode, op1); if (GET_CODE (op2) == CONST_INT) { HOST_WIDE_INT value = INTVAL (op2); if (value >= 2147483647) { emit_move_insn (op0, const1_rtx); DONE; } op2 = GEN_INT (value+1); if (value < -32768 || value >= 32767) op2 = force_reg (mode, op2); emit_insn (gen_slt_insn (op0, op1, op2)); DONE; } if (! register_operand (op2, mode)) op2 = force_reg (mode, op2); emit_insn (gen_sle_insn (op0, op1, op2)); DONE; }") (define_insn "sle_insn" [(set (match_operand:SI 0 "register_operand" "=r") (le:SI (match_operand:SI 1 "register_operand" "r") (match_operand:SI 2 "register_operand" "r"))) (clobber (reg:CC 17))] "" "#" [(set_attr "type" "multi") (set_attr "length" "8")]) (define_split [(set (match_operand:SI 0 "register_operand" "") (le:SI (match_operand:SI 1 "register_operand" "") (match_operand:SI 2 "register_operand" ""))) (clobber (reg:CC 17))] "!optimize_size" [(set (reg:CC 17) (lt:CC (match_dup 2) (match_dup 1))) (set (match_dup 0) (ne:SI (reg:CC 17) (const_int 0))) (set (match_dup 0) (xor:SI (match_dup 0) (const_int 1)))] "") ;; If optimizing for space, use -(reg - 1) to invert the comparison rather than ;; xor reg,reg,1 which might eliminate a NOP being inserted. (define_split [(set (match_operand:SI 0 "register_operand" "") (le:SI (match_operand:SI 1 "register_operand" "") (match_operand:SI 2 "register_operand" ""))) (clobber (reg:CC 17))] "optimize_size" [(set (reg:CC 17) (lt:CC (match_dup 2) (match_dup 1))) (set (match_dup 0) (ne:SI (reg:CC 17) (const_int 0))) (set (match_dup 0) (plus:SI (match_dup 0) (const_int -1))) (set (match_dup 0) (neg:SI (match_dup 0)))] "") (define_expand "sgt" [(match_operand:SI 0 "register_operand" "")] "" " { rtx op0 = operands[0]; rtx op1 = m32r_compare_op0; rtx op2 = m32r_compare_op1; enum machine_mode mode = GET_MODE (op0); if (mode != SImode) FAIL; if (! register_operand (op1, mode)) op1 = force_reg (mode, op1); if (! register_operand (op2, mode)) op2 = force_reg (mode, op2); emit_insn (gen_slt_insn (op0, op2, op1)); DONE; }") (define_expand "sge" [(match_operand:SI 0 "register_operand" "")] "" " { rtx op0 = operands[0]; rtx op1 = m32r_compare_op0; rtx op2 = m32r_compare_op1; enum machine_mode mode = GET_MODE (op0); if (mode != SImode) FAIL; if (! register_operand (op1, mode)) op1 = force_reg (mode, op1); if (! reg_or_int16_operand (op2, mode)) op2 = force_reg (mode, op2); emit_insn (gen_sge_insn (op0, op1, op2)); DONE; }") (define_insn "sge_insn" [(set (match_operand:SI 0 "register_operand" "=r,r") (ge:SI (match_operand:SI 1 "register_operand" "r,r") (match_operand:SI 2 "reg_or_int16_operand" "r,J"))) (clobber (reg:CC 17))] "" "#" [(set_attr "type" "multi") (set_attr "length" "8,10")]) (define_split [(set (match_operand:SI 0 "register_operand" "") (ge:SI (match_operand:SI 1 "register_operand" "") (match_operand:SI 2 "reg_or_int16_operand" ""))) (clobber (reg:CC 17))] "!optimize_size" [(set (reg:CC 17) (lt:CC (match_dup 1) (match_dup 2))) (set (match_dup 0) (ne:SI (reg:CC 17) (const_int 0))) (set (match_dup 0) (xor:SI (match_dup 0) (const_int 1)))] "") ;; If optimizing for space, use -(reg - 1) to invert the comparison rather than ;; xor reg,reg,1 which might eliminate a NOP being inserted. (define_split [(set (match_operand:SI 0 "register_operand" "") (ge:SI (match_operand:SI 1 "register_operand" "") (match_operand:SI 2 "reg_or_int16_operand" ""))) (clobber (reg:CC 17))] "optimize_size" [(set (reg:CC 17) (lt:CC (match_dup 1) (match_dup 2))) (set (match_dup 0) (ne:SI (reg:CC 17) (const_int 0))) (set (match_dup 0) (plus:SI (match_dup 0) (const_int -1))) (set (match_dup 0) (neg:SI (match_dup 0)))] "") (define_expand "sltu" [(match_operand:SI 0 "register_operand" "")] "" " { rtx op0 = operands[0]; rtx op1 = m32r_compare_op0; rtx op2 = m32r_compare_op1; enum machine_mode mode = GET_MODE (op0); if (mode != SImode) FAIL; if (! register_operand (op1, mode)) op1 = force_reg (mode, op1); if (! reg_or_int16_operand (op2, mode)) op2 = force_reg (mode, op2); emit_insn (gen_sltu_insn (op0, op1, op2)); DONE; }") (define_insn "sltu_insn" [(set (match_operand:SI 0 "register_operand" "=r,r") (ltu:SI (match_operand:SI 1 "register_operand" "r,r") (match_operand:SI 2 "reg_or_int16_operand" "r,J"))) (clobber (reg:CC 17))] "" "#" [(set_attr "type" "multi") (set_attr "length" "6,8")]) (define_split [(set (match_operand:SI 0 "register_operand" "") (ltu:SI (match_operand:SI 1 "register_operand" "") (match_operand:SI 2 "reg_or_int16_operand" ""))) (clobber (reg:CC 17))] "" [(set (reg:CC 17) (ltu:CC (match_dup 1) (match_dup 2))) (set (match_dup 0) (ne:SI (reg:CC 17) (const_int 0)))] "") (define_expand "sleu" [(match_operand:SI 0 "register_operand" "")] "" " { rtx op0 = operands[0]; rtx op1 = m32r_compare_op0; rtx op2 = m32r_compare_op1; enum machine_mode mode = GET_MODE (op0); if (mode != SImode) FAIL; if (GET_CODE (op2) == CONST_INT) { HOST_WIDE_INT value = INTVAL (op2); if (value >= 2147483647) { emit_move_insn (op0, const1_rtx); DONE; } op2 = GEN_INT (value+1); if (value < 0 || value >= 32767) op2 = force_reg (mode, op2); emit_insn (gen_sltu_insn (op0, op1, op2)); DONE; } if (! register_operand (op2, mode)) op2 = force_reg (mode, op2); emit_insn (gen_sleu_insn (op0, op1, op2)); DONE; }") (define_insn "sleu_insn" [(set (match_operand:SI 0 "register_operand" "=r") (leu:SI (match_operand:SI 1 "register_operand" "r") (match_operand:SI 2 "register_operand" "r"))) (clobber (reg:CC 17))] "" "#" [(set_attr "type" "multi") (set_attr "length" "8")]) (define_split [(set (match_operand:SI 0 "register_operand" "") (leu:SI (match_operand:SI 1 "register_operand" "") (match_operand:SI 2 "register_operand" ""))) (clobber (reg:CC 17))] "!optimize_size" [(set (reg:CC 17) (ltu:CC (match_dup 2) (match_dup 1))) (set (match_dup 0) (ne:SI (reg:CC 17) (const_int 0))) (set (match_dup 0) (xor:SI (match_dup 0) (const_int 1)))] "") ;; If optimizing for space, use -(reg - 1) to invert the comparison rather than ;; xor reg,reg,1 which might eliminate a NOP being inserted. (define_split [(set (match_operand:SI 0 "register_operand" "") (leu:SI (match_operand:SI 1 "register_operand" "") (match_operand:SI 2 "register_operand" ""))) (clobber (reg:CC 17))] "optimize_size" [(set (reg:CC 17) (ltu:CC (match_dup 2) (match_dup 1))) (set (match_dup 0) (ne:SI (reg:CC 17) (const_int 0))) (set (match_dup 0) (plus:SI (match_dup 0) (const_int -1))) (set (match_dup 0) (neg:SI (match_dup 0)))] "") (define_expand "sgtu" [(match_operand:SI 0 "register_operand" "")] "" " { rtx op0 = operands[0]; rtx op1 = m32r_compare_op0; rtx op2 = m32r_compare_op1; enum machine_mode mode = GET_MODE (op0); if (mode != SImode) FAIL; if (! register_operand (op1, mode)) op1 = force_reg (mode, op1); if (! register_operand (op2, mode)) op2 = force_reg (mode, op2); emit_insn (gen_sltu_insn (op0, op2, op1)); DONE; }") (define_expand "sgeu" [(match_operand:SI 0 "register_operand" "")] "" " { rtx op0 = operands[0]; rtx op1 = m32r_compare_op0; rtx op2 = m32r_compare_op1; enum machine_mode mode = GET_MODE (op0); if (mode != SImode) FAIL; if (! register_operand (op1, mode)) op1 = force_reg (mode, op1); if (! reg_or_int16_operand (op2, mode)) op2 = force_reg (mode, op2); emit_insn (gen_sgeu_insn (op0, op1, op2)); DONE; }") (define_insn "sgeu_insn" [(set (match_operand:SI 0 "register_operand" "=r,r") (geu:SI (match_operand:SI 1 "register_operand" "r,r") (match_operand:SI 2 "reg_or_int16_operand" "r,J"))) (clobber (reg:CC 17))] "" "#" [(set_attr "type" "multi") (set_attr "length" "8,10")]) (define_split [(set (match_operand:SI 0 "register_operand" "") (geu:SI (match_operand:SI 1 "register_operand" "") (match_operand:SI 2 "reg_or_int16_operand" ""))) (clobber (reg:CC 17))] "!optimize_size" [(set (reg:CC 17) (ltu:CC (match_dup 1) (match_dup 2))) (set (match_dup 0) (ne:SI (reg:CC 17) (const_int 0))) (set (match_dup 0) (xor:SI (match_dup 0) (const_int 1)))] "") ;; If optimizing for space, use -(reg - 1) to invert the comparison rather than ;; xor reg,reg,1 which might eliminate a NOP being inserted. (define_split [(set (match_operand:SI 0 "register_operand" "") (geu:SI (match_operand:SI 1 "register_operand" "") (match_operand:SI 2 "reg_or_int16_operand" ""))) (clobber (reg:CC 17))] "optimize_size" [(set (reg:CC 17) (ltu:CC (match_dup 1) (match_dup 2))) (set (match_dup 0) (ne:SI (reg:CC 17) (const_int 0))) (set (match_dup 0) (plus:SI (match_dup 0) (const_int -1))) (set (match_dup 0) (neg:SI (match_dup 0)))] "") (define_insn "movcc_insn" [(set (match_operand:SI 0 "register_operand" "=r") (ne:SI (reg:CC 17) (const_int 0)))] "" "mvfc %0, cbr" [(set_attr "type" "misc") (set_attr "length" "2")]) ;; Unconditional and other jump instructions. (define_insn "jump" [(set (pc) (label_ref (match_operand 0 "" "")))] "" "bra %l0" [(set_attr "type" "uncond_branch") (set (attr "length") (if_then_else (ltu (plus (minus (match_dup 0) (pc)) (const_int 400)) (const_int 800)) (const_int 2) (const_int 4)))]) (define_insn "indirect_jump" [(set (pc) (match_operand:SI 0 "address_operand" "p"))] "" "jmp %a0" [(set_attr "type" "uncond_branch") (set_attr "length" "2")]) (define_insn "return" [(return)] "direct_return ()" "jmp lr" [(set_attr "type" "uncond_branch") (set_attr "length" "2")]) (define_expand "tablejump" [(parallel [(set (pc) (match_operand 0 "register_operand" "r")) (use (label_ref (match_operand 1 "" "")))])] "" " { /* In pic mode, our address differences are against the base of the table. Add that base value back in; CSE ought to be able to combine the two address loads. */ if (flag_pic) { rtx tmp, tmp2; tmp = gen_rtx_LABEL_REF (Pmode, operands[1]); tmp2 = operands[0]; tmp = gen_rtx_PLUS (Pmode, tmp2, tmp); operands[0] = memory_address (Pmode, tmp); } }") (define_insn "*tablejump_insn" [(set (pc) (match_operand:SI 0 "address_operand" "p")) (use (label_ref (match_operand 1 "" "")))] "" "jmp %a0" [(set_attr "type" "uncond_branch") (set_attr "length" "2")]) (define_expand "call" ;; operands[1] is stack_size_rtx ;; operands[2] is next_arg_register [(parallel [(call (match_operand:SI 0 "call_operand" "") (match_operand 1 "" "")) (clobber (reg:SI 14))])] "" " { if (flag_pic) current_function_uses_pic_offset_table = 1; }") (define_insn "*call_via_reg" [(call (mem:SI (match_operand:SI 0 "register_operand" "r")) (match_operand 1 "" "")) (clobber (reg:SI 14))] "" "jl %0" [(set_attr "type" "call") (set_attr "length" "2")]) (define_insn "*call_via_label" [(call (mem:SI (match_operand:SI 0 "call_address_operand" "")) (match_operand 1 "" "")) (clobber (reg:SI 14))] "" "* { int call26_p = call26_operand (operands[0], FUNCTION_MODE); if (! call26_p) { /* We may not be able to reach with a `bl' insn so punt and leave it to the linker. We do this here, rather than doing a force_reg in the define_expand so these insns won't be separated, say by scheduling, thus simplifying the linker. */ return \"seth r14,%T0\;add3 r14,r14,%B0\;jl r14\"; } else return \"bl %0\"; }" [(set_attr "type" "call") (set (attr "length") (if_then_else (eq (symbol_ref "call26_operand (operands[0], FUNCTION_MODE)") (const_int 0)) (const_int 12) ; 10 + 2 for nop filler ; The return address must be on a 4 byte boundary so ; there's no point in using a value of 2 here. A 2 byte ; insn may go in the left slot but we currently can't ; use such knowledge. (const_int 4)))]) (define_expand "call_value" ;; operand 2 is stack_size_rtx ;; operand 3 is next_arg_register [(parallel [(set (match_operand 0 "register_operand" "=r") (call (match_operand:SI 1 "call_operand" "") (match_operand 2 "" ""))) (clobber (reg:SI 14))])] "" " { if (flag_pic) current_function_uses_pic_offset_table = 1; }") (define_insn "*call_value_via_reg" [(set (match_operand 0 "register_operand" "=r") (call (mem:SI (match_operand:SI 1 "register_operand" "r")) (match_operand 2 "" ""))) (clobber (reg:SI 14))] "" "jl %1" [(set_attr "type" "call") (set_attr "length" "2")]) (define_insn "*call_value_via_label" [(set (match_operand 0 "register_operand" "=r") (call (mem:SI (match_operand:SI 1 "call_address_operand" "")) (match_operand 2 "" ""))) (clobber (reg:SI 14))] "" "* { int call26_p = call26_operand (operands[1], FUNCTION_MODE); if (flag_pic) current_function_uses_pic_offset_table = 1; if (! call26_p) { /* We may not be able to reach with a `bl' insn so punt and leave it to the linker. We do this here, rather than doing a force_reg in the define_expand so these insns won't be separated, say by scheduling, thus simplifying the linker. */ return \"seth r14,%T1\;add3 r14,r14,%B1\;jl r14\"; } else return \"bl %1\"; }" [(set_attr "type" "call") (set (attr "length") (if_then_else (eq (symbol_ref "call26_operand (operands[1], FUNCTION_MODE)") (const_int 0)) (const_int 12) ; 10 + 2 for nop filler ; The return address must be on a 4 byte boundary so ; there's no point in using a value of 2 here. A 2 byte ; insn may go in the left slot but we currently can't ; use such knowledge. (const_int 4)))]) (define_insn "nop" [(const_int 0)] "" "nop" [(set_attr "type" "int2") (set_attr "length" "2")]) ;; UNSPEC_VOLATILE is considered to use and clobber all hard registers and ;; all of memory. This blocks insns from being moved across this point. (define_insn "blockage" [(unspec_volatile [(const_int 0)] UNSPECV_BLOCKAGE)] "" "") ;; Special pattern to flush the icache. (define_insn "flush_icache" [(unspec_volatile [(match_operand 0 "memory_operand" "m")] UNSPECV_FLUSH_ICACHE) (match_operand 1 "" "") (clobber (reg:SI 17))] "" "* return \"trap %#%1 ; flush-icache\";" [(set_attr "type" "int4") (set_attr "length" "4")]) ;; Speed up fabs and provide correct sign handling for -0 (define_insn "absdf2" [(set (match_operand:DF 0 "register_operand" "=r") (abs:DF (match_operand:DF 1 "register_operand" "0")))] "" "#" [(set_attr "type" "multi") (set_attr "length" "4")]) (define_split [(set (match_operand:DF 0 "register_operand" "") (abs:DF (match_operand:DF 1 "register_operand" "")))] "reload_completed" [(set (match_dup 2) (ashift:SI (match_dup 2) (const_int 1))) (set (match_dup 2) (lshiftrt:SI (match_dup 2) (const_int 1)))] "operands[2] = gen_highpart (SImode, operands[0]);") (define_insn "abssf2" [(set (match_operand:SF 0 "register_operand" "=r") (abs:SF (match_operand:SF 1 "register_operand" "0")))] "" "#" [(set_attr "type" "multi") (set_attr "length" "4")]) (define_split [(set (match_operand:SF 0 "register_operand" "") (abs:SF (match_operand:SF 1 "register_operand" "")))] "reload_completed" [(set (match_dup 2) (ashift:SI (match_dup 2) (const_int 1))) (set (match_dup 2) (lshiftrt:SI (match_dup 2) (const_int 1)))] "operands[2] = gen_highpart (SImode, operands[0]);") ;; Conditional move instructions ;; Based on those done for the d10v (define_expand "movsicc" [ (set (match_operand:SI 0 "register_operand" "r") (if_then_else:SI (match_operand 1 "" "") (match_operand:SI 2 "conditional_move_operand" "O") (match_operand:SI 3 "conditional_move_operand" "O") ) ) ] "" " { if (! zero_and_one (operands [2], operands [3])) FAIL; /* Generate the comparison that will set the carry flag. */ operands[1] = gen_compare (GET_CODE (operands[1]), m32r_compare_op0, m32r_compare_op1, TRUE); /* See other movsicc pattern below for reason why. */ emit_insn (gen_blockage ()); }") ;; Generate the conditional instructions based on how the carry flag is examined. (define_insn "*movsicc_internal" [(set (match_operand:SI 0 "register_operand" "=r") (if_then_else:SI (match_operand 1 "carry_compare_operand" "") (match_operand:SI 2 "conditional_move_operand" "O") (match_operand:SI 3 "conditional_move_operand" "O") ) )] "zero_and_one (operands [2], operands[3])" "* return emit_cond_move (operands, insn);" [(set_attr "type" "multi") (set_attr "length" "8") ] ) ;; Block moves, see m32r.c for more details. ;; Argument 0 is the destination ;; Argument 1 is the source ;; Argument 2 is the length ;; Argument 3 is the alignment (define_expand "movmemsi" [(parallel [(set (match_operand:BLK 0 "general_operand" "") (match_operand:BLK 1 "general_operand" "")) (use (match_operand:SI 2 "immediate_operand" "")) (use (match_operand:SI 3 "immediate_operand" ""))])] "" " { if (operands[0]) /* avoid unused code messages */ { m32r_expand_block_move (operands); DONE; } }") ;; Insn generated by block moves (define_insn "movmemsi_internal" [(set (mem:BLK (match_operand:SI 0 "register_operand" "r")) ;; destination (mem:BLK (match_operand:SI 1 "register_operand" "r"))) ;; source (use (match_operand:SI 2 "m32r_block_immediate_operand" "J"));; # bytes to move (set (match_operand:SI 3 "register_operand" "=0") (plus:SI (match_dup 0) (minus (match_dup 2) (const_int 4)))) (set (match_operand:SI 4 "register_operand" "=1") (plus:SI (match_dup 1) (match_dup 2))) (clobber (match_scratch:SI 5 "=&r")) ;; temp1 (clobber (match_scratch:SI 6 "=&r"))] ;; temp2 "" "* m32r_output_block_move (insn, operands); return \"\"; " [(set_attr "type" "store8") (set_attr "length" "72")]) ;; Maximum ;; PIC /* When generating pic, we need to load the symbol offset into a register. So that the optimizer does not confuse this with a normal symbol load we use an unspec. The offset will be loaded from a constant pool entry, since that is the only type of relocation we can use. */ (define_insn "pic_load_addr" [(set (match_operand:SI 0 "register_operand" "=r") (unspec:SI [(match_operand 1 "" "")] UNSPEC_PIC_LOAD_ADDR))] "flag_pic" "ld24 %0,%#%1" [(set_attr "type" "int4")]) ;; Load program counter insns. (define_insn "get_pc" [(clobber (reg:SI 14)) (set (match_operand 0 "register_operand" "=r") (unspec [(match_operand 1 "" "")] UNSPEC_GET_PC)) (use (match_operand:SI 2 "immediate_operand" ""))] "flag_pic" "* { if (INTVAL(operands[2])) return \"bl.s .+4\;ld24 %0,%#%1\;add %0,lr\"; else return \"bl.s .+4\;seth %0,%#shigh(%1)\;add3 %0,%0,%#low(%1+4)\;add %0,lr\";}" [(set (attr "length") (if_then_else (ne (match_dup 2) (const_int 0)) (const_int 8) (const_int 12)))]) (define_expand "builtin_setjmp_receiver" [(label_ref (match_operand 0 "" ""))] "flag_pic" " { m32r_load_pic_register (); DONE; }")