/* Definitions of target machine for GNU compiler, for DEC Alpha. Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2004, 2005 Free Software Foundation, Inc. Contributed by Richard Kenner (kenner@vlsi1.ultra.nyu.edu) This file is part of GCC. GCC is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. GCC is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GCC; see the file COPYING. If not, write to the Free Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ /* Target CPU builtins. */ #define TARGET_CPU_CPP_BUILTINS() \ do \ { \ builtin_define ("__alpha"); \ builtin_define ("__alpha__"); \ builtin_assert ("cpu=alpha"); \ builtin_assert ("machine=alpha"); \ if (TARGET_CIX) \ { \ builtin_define ("__alpha_cix__"); \ builtin_assert ("cpu=cix"); \ } \ if (TARGET_FIX) \ { \ builtin_define ("__alpha_fix__"); \ builtin_assert ("cpu=fix"); \ } \ if (TARGET_BWX) \ { \ builtin_define ("__alpha_bwx__"); \ builtin_assert ("cpu=bwx"); \ } \ if (TARGET_MAX) \ { \ builtin_define ("__alpha_max__"); \ builtin_assert ("cpu=max"); \ } \ if (alpha_cpu == PROCESSOR_EV6) \ { \ builtin_define ("__alpha_ev6__"); \ builtin_assert ("cpu=ev6"); \ } \ else if (alpha_cpu == PROCESSOR_EV5) \ { \ builtin_define ("__alpha_ev5__"); \ builtin_assert ("cpu=ev5"); \ } \ else /* Presumably ev4. */ \ { \ builtin_define ("__alpha_ev4__"); \ builtin_assert ("cpu=ev4"); \ } \ if (TARGET_IEEE || TARGET_IEEE_WITH_INEXACT) \ builtin_define ("_IEEE_FP"); \ if (TARGET_IEEE_WITH_INEXACT) \ builtin_define ("_IEEE_FP_INEXACT"); \ if (TARGET_LONG_DOUBLE_128) \ builtin_define ("__LONG_DOUBLE_128__"); \ \ /* Macros dependent on the C dialect. */ \ SUBTARGET_LANGUAGE_CPP_BUILTINS(); \ } while (0) #ifndef SUBTARGET_LANGUAGE_CPP_BUILTINS #define SUBTARGET_LANGUAGE_CPP_BUILTINS() \ do \ { \ if (preprocessing_asm_p ()) \ builtin_define_std ("LANGUAGE_ASSEMBLY"); \ else if (c_dialect_cxx ()) \ { \ builtin_define ("__LANGUAGE_C_PLUS_PLUS"); \ builtin_define ("__LANGUAGE_C_PLUS_PLUS__"); \ } \ else \ builtin_define_std ("LANGUAGE_C"); \ if (c_dialect_objc ()) \ { \ builtin_define ("__LANGUAGE_OBJECTIVE_C"); \ builtin_define ("__LANGUAGE_OBJECTIVE_C__"); \ } \ } \ while (0) #endif #define CPP_SPEC "%(cpp_subtarget)" #ifndef CPP_SUBTARGET_SPEC #define CPP_SUBTARGET_SPEC "" #endif #define WORD_SWITCH_TAKES_ARG(STR) \ (!strcmp (STR, "rpath") || DEFAULT_WORD_SWITCH_TAKES_ARG(STR)) /* Print subsidiary information on the compiler version in use. */ #define TARGET_VERSION /* Run-time compilation parameters selecting different hardware subsets. */ /* Which processor to schedule for. The cpu attribute defines a list that mirrors this list, so changes to alpha.md must be made at the same time. */ enum processor_type { PROCESSOR_EV4, /* 2106[46]{a,} */ PROCESSOR_EV5, /* 21164{a,pc,} */ PROCESSOR_EV6, /* 21264 */ PROCESSOR_MAX }; extern enum processor_type alpha_cpu; extern enum processor_type alpha_tune; enum alpha_trap_precision { ALPHA_TP_PROG, /* No precision (default). */ ALPHA_TP_FUNC, /* Trap contained within originating function. */ ALPHA_TP_INSN /* Instruction accuracy and code is resumption safe. */ }; enum alpha_fp_rounding_mode { ALPHA_FPRM_NORM, /* Normal rounding mode. */ ALPHA_FPRM_MINF, /* Round towards minus-infinity. */ ALPHA_FPRM_CHOP, /* Chopped rounding mode (towards 0). */ ALPHA_FPRM_DYN /* Dynamic rounding mode. */ }; enum alpha_fp_trap_mode { ALPHA_FPTM_N, /* Normal trap mode. */ ALPHA_FPTM_U, /* Underflow traps enabled. */ ALPHA_FPTM_SU, /* Software completion, w/underflow traps */ ALPHA_FPTM_SUI /* Software completion, w/underflow & inexact traps */ }; extern int target_flags; extern enum alpha_trap_precision alpha_tp; extern enum alpha_fp_rounding_mode alpha_fprm; extern enum alpha_fp_trap_mode alpha_fptm; /* Invert the easy way to make options work. */ #define TARGET_FP (!TARGET_SOFT_FP) /* These are for target os support and cannot be changed at runtime. */ #define TARGET_ABI_WINDOWS_NT 0 #define TARGET_ABI_OPEN_VMS 0 #define TARGET_ABI_UNICOSMK 0 #define TARGET_ABI_OSF (!TARGET_ABI_WINDOWS_NT \ && !TARGET_ABI_OPEN_VMS \ && !TARGET_ABI_UNICOSMK) #ifndef TARGET_AS_CAN_SUBTRACT_LABELS #define TARGET_AS_CAN_SUBTRACT_LABELS TARGET_GAS #endif #ifndef TARGET_AS_SLASH_BEFORE_SUFFIX #define TARGET_AS_SLASH_BEFORE_SUFFIX TARGET_GAS #endif #ifndef TARGET_CAN_FAULT_IN_PROLOGUE #define TARGET_CAN_FAULT_IN_PROLOGUE 0 #endif #ifndef TARGET_HAS_XFLOATING_LIBS #define TARGET_HAS_XFLOATING_LIBS TARGET_LONG_DOUBLE_128 #endif #ifndef TARGET_PROFILING_NEEDS_GP #define TARGET_PROFILING_NEEDS_GP 0 #endif #ifndef TARGET_LD_BUGGY_LDGP #define TARGET_LD_BUGGY_LDGP 0 #endif #ifndef TARGET_FIXUP_EV5_PREFETCH #define TARGET_FIXUP_EV5_PREFETCH 0 #endif #ifndef HAVE_AS_TLS #define HAVE_AS_TLS 0 #endif #define TARGET_DEFAULT MASK_FPREGS #ifndef TARGET_CPU_DEFAULT #define TARGET_CPU_DEFAULT 0 #endif #ifndef TARGET_DEFAULT_EXPLICIT_RELOCS #ifdef HAVE_AS_EXPLICIT_RELOCS #define TARGET_DEFAULT_EXPLICIT_RELOCS MASK_EXPLICIT_RELOCS #define TARGET_SUPPORT_ARCH 1 #else #define TARGET_DEFAULT_EXPLICIT_RELOCS 0 #endif #endif #ifndef TARGET_SUPPORT_ARCH #define TARGET_SUPPORT_ARCH 0 #endif /* Support for a compile-time default CPU, et cetera. The rules are: --with-cpu is ignored if -mcpu is specified. --with-tune is ignored if -mtune is specified. */ #define OPTION_DEFAULT_SPECS \ {"cpu", "%{!mcpu=*:-mcpu=%(VALUE)}" }, \ {"tune", "%{!mtune=*:-mtune=%(VALUE)}" } /* This macro defines names of additional specifications to put in the specs that can be used in various specifications like CC1_SPEC. Its definition is an initializer with a subgrouping for each command option. Each subgrouping contains a string constant, that defines the specification name, and a string constant that used by the GCC driver program. Do not define this macro if it does not need to do anything. */ #ifndef SUBTARGET_EXTRA_SPECS #define SUBTARGET_EXTRA_SPECS #endif #define EXTRA_SPECS \ { "cpp_subtarget", CPP_SUBTARGET_SPEC }, \ SUBTARGET_EXTRA_SPECS /* Sometimes certain combinations of command options do not make sense on a particular target machine. You can define a macro `OVERRIDE_OPTIONS' to take account of this. This macro, if defined, is executed once just after all the command options have been parsed. On the Alpha, it is used to translate target-option strings into numeric values. */ #define OVERRIDE_OPTIONS override_options () /* Define this macro to change register usage conditional on target flags. On the Alpha, we use this to disable the floating-point registers when they don't exist. */ #define CONDITIONAL_REGISTER_USAGE \ { \ int i; \ if (! TARGET_FPREGS) \ for (i = 32; i < 63; i++) \ fixed_regs[i] = call_used_regs[i] = 1; \ } /* Show we can debug even without a frame pointer. */ #define CAN_DEBUG_WITHOUT_FP /* target machine storage layout */ /* Define the size of `int'. The default is the same as the word size. */ #define INT_TYPE_SIZE 32 /* Define the size of `long long'. The default is the twice the word size. */ #define LONG_LONG_TYPE_SIZE 64 /* We're IEEE unless someone says to use VAX. */ #define TARGET_FLOAT_FORMAT \ (TARGET_FLOAT_VAX ? VAX_FLOAT_FORMAT : IEEE_FLOAT_FORMAT) /* The two floating-point formats we support are S-floating, which is 4 bytes, and T-floating, which is 8 bytes. `float' is S and `double' and `long double' are T. */ #define FLOAT_TYPE_SIZE 32 #define DOUBLE_TYPE_SIZE 64 #define LONG_DOUBLE_TYPE_SIZE (TARGET_LONG_DOUBLE_128 ? 128 : 64) /* Define this to set long double type size to use in libgcc2.c, which can not depend on target_flags. */ #ifdef __LONG_DOUBLE_128__ #define LIBGCC2_LONG_DOUBLE_TYPE_SIZE 128 #else #define LIBGCC2_LONG_DOUBLE_TYPE_SIZE 64 #endif /* Work around target_flags dependency in ada/targtyps.c. */ #define WIDEST_HARDWARE_FP_SIZE 64 #define WCHAR_TYPE "unsigned int" #define WCHAR_TYPE_SIZE 32 /* Define this macro if it is advisable to hold scalars in registers in a wider mode than that declared by the program. In such cases, the value is constrained to be within the bounds of the declared type, but kept valid in the wider mode. The signedness of the extension may differ from that of the type. For Alpha, we always store objects in a full register. 32-bit integers are always sign-extended, but smaller objects retain their signedness. Note that small vector types can get mapped onto integer modes at the whim of not appearing in alpha-modes.def. We never promoted these values before; don't do so now that we've trimmed the set of modes to those actually implemented in the backend. */ #define PROMOTE_MODE(MODE,UNSIGNEDP,TYPE) \ if (GET_MODE_CLASS (MODE) == MODE_INT \ && (TYPE == NULL || TREE_CODE (TYPE) != VECTOR_TYPE) \ && GET_MODE_SIZE (MODE) < UNITS_PER_WORD) \ { \ if ((MODE) == SImode) \ (UNSIGNEDP) = 0; \ (MODE) = DImode; \ } /* Define this if most significant bit is lowest numbered in instructions that operate on numbered bit-fields. There are no such instructions on the Alpha, but the documentation is little endian. */ #define BITS_BIG_ENDIAN 0 /* Define this if most significant byte of a word is the lowest numbered. This is false on the Alpha. */ #define BYTES_BIG_ENDIAN 0 /* Define this if most significant word of a multiword number is lowest numbered. For Alpha we can decide arbitrarily since there are no machine instructions for them. Might as well be consistent with bytes. */ #define WORDS_BIG_ENDIAN 0 /* Width of a word, in units (bytes). */ #define UNITS_PER_WORD 8 /* Width in bits of a pointer. See also the macro `Pmode' defined below. */ #define POINTER_SIZE 64 /* Allocation boundary (in *bits*) for storing arguments in argument list. */ #define PARM_BOUNDARY 64 /* Boundary (in *bits*) on which stack pointer should be aligned. */ #define STACK_BOUNDARY 128 /* Allocation boundary (in *bits*) for the code of a function. */ #define FUNCTION_BOUNDARY 32 /* Alignment of field after `int : 0' in a structure. */ #define EMPTY_FIELD_BOUNDARY 64 /* Every structure's size must be a multiple of this. */ #define STRUCTURE_SIZE_BOUNDARY 8 /* A bit-field declared as `int' forces `int' alignment for the struct. */ #define PCC_BITFIELD_TYPE_MATTERS 1 /* No data type wants to be aligned rounder than this. */ #define BIGGEST_ALIGNMENT 128 /* For atomic access to objects, must have at least 32-bit alignment unless the machine has byte operations. */ #define MINIMUM_ATOMIC_ALIGNMENT ((unsigned int) (TARGET_BWX ? 8 : 32)) /* Align all constants and variables to at least a word boundary so we can pick up pieces of them faster. */ /* ??? Only if block-move stuff knows about different source/destination alignment. */ #if 0 #define CONSTANT_ALIGNMENT(EXP, ALIGN) MAX ((ALIGN), BITS_PER_WORD) #define DATA_ALIGNMENT(EXP, ALIGN) MAX ((ALIGN), BITS_PER_WORD) #endif /* Set this nonzero if move instructions will actually fail to work when given unaligned data. Since we get an error message when we do one, call them invalid. */ #define STRICT_ALIGNMENT 1 /* Set this nonzero if unaligned move instructions are extremely slow. On the Alpha, they trap. */ #define SLOW_UNALIGNED_ACCESS(MODE, ALIGN) 1 /* Standard register usage. */ /* Number of actual hardware registers. The hardware registers are assigned numbers for the compiler from 0 to just below FIRST_PSEUDO_REGISTER. All registers that the compiler knows about must be given numbers, even those that are not normally considered general registers. We define all 32 integer registers, even though $31 is always zero, and all 32 floating-point registers, even though $f31 is also always zero. We do not bother defining the FP status register and there are no other registers. Since $31 is always zero, we will use register number 31 as the argument pointer. It will never appear in the generated code because we will always be eliminating it in favor of the stack pointer or hardware frame pointer. Likewise, we use $f31 for the frame pointer, which will always be eliminated in favor of the hardware frame pointer or the stack pointer. */ #define FIRST_PSEUDO_REGISTER 64 /* 1 for registers that have pervasive standard uses and are not available for the register allocator. */ #define FIXED_REGISTERS \ {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, \ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1 } /* 1 for registers not available across function calls. These must include the FIXED_REGISTERS and also any registers that can be used without being saved. The latter must include the registers where values are returned and the register where structure-value addresses are passed. Aside from that, you can include as many other registers as you like. */ #define CALL_USED_REGISTERS \ {1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, \ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, \ 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, \ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 } /* List the order in which to allocate registers. Each register must be listed once, even those in FIXED_REGISTERS. */ #define REG_ALLOC_ORDER { \ 1, 2, 3, 4, 5, 6, 7, 8, /* nonsaved integer registers */ \ 22, 23, 24, 25, 28, /* likewise */ \ 0, /* likewise, but return value */ \ 21, 20, 19, 18, 17, 16, /* likewise, but input args */ \ 27, /* likewise, but OSF procedure value */ \ \ 42, 43, 44, 45, 46, 47, /* nonsaved floating-point registers */ \ 54, 55, 56, 57, 58, 59, /* likewise */ \ 60, 61, 62, /* likewise */ \ 32, 33, /* likewise, but return values */ \ 53, 52, 51, 50, 49, 48, /* likewise, but input args */ \ \ 9, 10, 11, 12, 13, 14, /* saved integer registers */ \ 26, /* return address */ \ 15, /* hard frame pointer */ \ \ 34, 35, 36, 37, 38, 39, /* saved floating-point registers */ \ 40, 41, /* likewise */ \ \ 29, 30, 31, 63 /* gp, sp, ap, sfp */ \ } /* Return number of consecutive hard regs needed starting at reg REGNO to hold something of mode MODE. This is ordinarily the length in words of a value of mode MODE but can be less for certain modes in special long registers. */ #define HARD_REGNO_NREGS(REGNO, MODE) \ ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD) /* Value is 1 if hard register REGNO can hold a value of machine-mode MODE. On Alpha, the integer registers can hold any mode. The floating-point registers can hold 64-bit integers as well, but not smaller values. */ #define HARD_REGNO_MODE_OK(REGNO, MODE) \ ((REGNO) >= 32 && (REGNO) <= 62 \ ? (MODE) == SFmode || (MODE) == DFmode || (MODE) == DImode \ || (MODE) == SCmode || (MODE) == DCmode \ : 1) /* A C expression that is nonzero if a value of mode MODE1 is accessible in mode MODE2 without copying. This asymmetric test is true when MODE1 could be put in an FP register but MODE2 could not. */ #define MODES_TIEABLE_P(MODE1, MODE2) \ (HARD_REGNO_MODE_OK (32, (MODE1)) \ ? HARD_REGNO_MODE_OK (32, (MODE2)) \ : 1) /* Specify the registers used for certain standard purposes. The values of these macros are register numbers. */ /* Alpha pc isn't overloaded on a register that the compiler knows about. */ /* #define PC_REGNUM */ /* Register to use for pushing function arguments. */ #define STACK_POINTER_REGNUM 30 /* Base register for access to local variables of the function. */ #define HARD_FRAME_POINTER_REGNUM 15 /* Value should be nonzero if functions must have frame pointers. Zero means the frame pointer need not be set up (and parms may be accessed via the stack pointer) in functions that seem suitable. This is computed in `reload', in reload1.c. */ #define FRAME_POINTER_REQUIRED 0 /* Base register for access to arguments of the function. */ #define ARG_POINTER_REGNUM 31 /* Base register for access to local variables of function. */ #define FRAME_POINTER_REGNUM 63 /* Register in which static-chain is passed to a function. For the Alpha, this is based on an example; the calling sequence doesn't seem to specify this. */ #define STATIC_CHAIN_REGNUM 1 /* The register number of the register used to address a table of static data addresses in memory. */ #define PIC_OFFSET_TABLE_REGNUM 29 /* Define this macro if the register defined by `PIC_OFFSET_TABLE_REGNUM' is clobbered by calls. */ /* ??? It is and it isn't. It's required to be valid for a given function when the function returns. It isn't clobbered by current_file functions. Moreover, we do not expose the ldgp until after reload, so we're probably safe. */ /* #define PIC_OFFSET_TABLE_REG_CALL_CLOBBERED */ /* Define the classes of registers for register constraints in the machine description. Also define ranges of constants. One of the classes must always be named ALL_REGS and include all hard regs. If there is more than one class, another class must be named NO_REGS and contain no registers. The name GENERAL_REGS must be the name of a class (or an alias for another name such as ALL_REGS). This is the class of registers that is allowed by "g" or "r" in a register constraint. Also, registers outside this class are allocated only when instructions express preferences for them. The classes must be numbered in nondecreasing order; that is, a larger-numbered class must never be contained completely in a smaller-numbered class. For any two classes, it is very desirable that there be another class that represents their union. */ enum reg_class { NO_REGS, R0_REG, R24_REG, R25_REG, R27_REG, GENERAL_REGS, FLOAT_REGS, ALL_REGS, LIM_REG_CLASSES }; #define N_REG_CLASSES (int) LIM_REG_CLASSES /* Give names of register classes as strings for dump file. */ #define REG_CLASS_NAMES \ {"NO_REGS", "R0_REG", "R24_REG", "R25_REG", "R27_REG", \ "GENERAL_REGS", "FLOAT_REGS", "ALL_REGS" } /* Define which registers fit in which classes. This is an initializer for a vector of HARD_REG_SET of length N_REG_CLASSES. */ #define REG_CLASS_CONTENTS \ { {0x00000000, 0x00000000}, /* NO_REGS */ \ {0x00000001, 0x00000000}, /* R0_REG */ \ {0x01000000, 0x00000000}, /* R24_REG */ \ {0x02000000, 0x00000000}, /* R25_REG */ \ {0x08000000, 0x00000000}, /* R27_REG */ \ {0xffffffff, 0x80000000}, /* GENERAL_REGS */ \ {0x00000000, 0x7fffffff}, /* FLOAT_REGS */ \ {0xffffffff, 0xffffffff} } /* The same information, inverted: Return the class number of the smallest class containing reg number REGNO. This could be a conditional expression or could index an array. */ #define REGNO_REG_CLASS(REGNO) \ ((REGNO) == 0 ? R0_REG \ : (REGNO) == 24 ? R24_REG \ : (REGNO) == 25 ? R25_REG \ : (REGNO) == 27 ? R27_REG \ : (REGNO) >= 32 && (REGNO) <= 62 ? FLOAT_REGS \ : GENERAL_REGS) /* The class value for index registers, and the one for base regs. */ #define INDEX_REG_CLASS NO_REGS #define BASE_REG_CLASS GENERAL_REGS /* Given an rtx X being reloaded into a reg required to be in class CLASS, return the class of reg to actually use. In general this is just CLASS; but on some machines in some cases it is preferable to use a more restrictive class. */ #define PREFERRED_RELOAD_CLASS alpha_preferred_reload_class /* Loading and storing HImode or QImode values to and from memory usually requires a scratch register. The exceptions are loading QImode and HImode from an aligned address to a general register unless byte instructions are permitted. We also cannot load an unaligned address or a paradoxical SUBREG into an FP register. */ #define SECONDARY_INPUT_RELOAD_CLASS(CLASS,MODE,IN) \ alpha_secondary_reload_class((CLASS), (MODE), (IN), 1) #define SECONDARY_OUTPUT_RELOAD_CLASS(CLASS,MODE,OUT) \ alpha_secondary_reload_class((CLASS), (MODE), (OUT), 0) /* If we are copying between general and FP registers, we need a memory location unless the FIX extension is available. */ #define SECONDARY_MEMORY_NEEDED(CLASS1,CLASS2,MODE) \ (! TARGET_FIX && (((CLASS1) == FLOAT_REGS && (CLASS2) != FLOAT_REGS) \ || ((CLASS2) == FLOAT_REGS && (CLASS1) != FLOAT_REGS))) /* Specify the mode to be used for memory when a secondary memory location is needed. If MODE is floating-point, use it. Otherwise, widen to a word like the default. This is needed because we always store integers in FP registers in quadword format. This whole area is very tricky! */ #define SECONDARY_MEMORY_NEEDED_MODE(MODE) \ (GET_MODE_CLASS (MODE) == MODE_FLOAT ? (MODE) \ : GET_MODE_SIZE (MODE) >= 4 ? (MODE) \ : mode_for_size (BITS_PER_WORD, GET_MODE_CLASS (MODE), 0)) /* Return the maximum number of consecutive registers needed to represent mode MODE in a register of class CLASS. */ #define CLASS_MAX_NREGS(CLASS, MODE) \ ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD) /* Return the class of registers that cannot change mode from FROM to TO. */ #define CANNOT_CHANGE_MODE_CLASS(FROM, TO, CLASS) \ (GET_MODE_SIZE (FROM) != GET_MODE_SIZE (TO) \ ? reg_classes_intersect_p (FLOAT_REGS, CLASS) : 0) /* Define the cost of moving between registers of various classes. Moving between FLOAT_REGS and anything else except float regs is expensive. In fact, we make it quite expensive because we really don't want to do these moves unless it is clearly worth it. Optimizations may reduce the impact of not being able to allocate a pseudo to a hard register. */ #define REGISTER_MOVE_COST(MODE, CLASS1, CLASS2) \ (((CLASS1) == FLOAT_REGS) == ((CLASS2) == FLOAT_REGS) ? 2 \ : TARGET_FIX ? ((CLASS1) == FLOAT_REGS ? 6 : 8) \ : 4+2*alpha_memory_latency) /* A C expressions returning the cost of moving data of MODE from a register to or from memory. On the Alpha, bump this up a bit. */ extern int alpha_memory_latency; #define MEMORY_MOVE_COST(MODE,CLASS,IN) (2*alpha_memory_latency) /* Provide the cost of a branch. Exact meaning under development. */ #define BRANCH_COST 5 /* Stack layout; function entry, exit and calling. */ /* Define this if pushing a word on the stack makes the stack pointer a smaller address. */ #define STACK_GROWS_DOWNWARD /* Define this to nonzero if the nominal address of the stack frame is at the high-address end of the local variables; that is, each additional local variable allocated goes at a more negative offset in the frame. */ /* #define FRAME_GROWS_DOWNWARD 0 */ /* Offset within stack frame to start allocating local variables at. If FRAME_GROWS_DOWNWARD, this is the offset to the END of the first local allocated. Otherwise, it is the offset to the BEGINNING of the first local allocated. */ #define STARTING_FRAME_OFFSET 0 /* If we generate an insn to push BYTES bytes, this says how many the stack pointer really advances by. On Alpha, don't define this because there are no push insns. */ /* #define PUSH_ROUNDING(BYTES) */ /* Define this to be nonzero if stack checking is built into the ABI. */ #define STACK_CHECK_BUILTIN 1 /* Define this if the maximum size of all the outgoing args is to be accumulated and pushed during the prologue. The amount can be found in the variable current_function_outgoing_args_size. */ #define ACCUMULATE_OUTGOING_ARGS 1 /* Offset of first parameter from the argument pointer register value. */ #define FIRST_PARM_OFFSET(FNDECL) 0 /* Definitions for register eliminations. We have two registers that can be eliminated on the Alpha. First, the frame pointer register can often be eliminated in favor of the stack pointer register. Secondly, the argument pointer register can always be eliminated; it is replaced with either the stack or frame pointer. */ /* This is an array of structures. Each structure initializes one pair of eliminable registers. The "from" register number is given first, followed by "to". Eliminations of the same "from" register are listed in order of preference. */ #define ELIMINABLE_REGS \ {{ ARG_POINTER_REGNUM, STACK_POINTER_REGNUM}, \ { ARG_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM}, \ { FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}, \ { FRAME_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM}} /* Given FROM and TO register numbers, say whether this elimination is allowed. Frame pointer elimination is automatically handled. All eliminations are valid since the cases where FP can't be eliminated are already handled. */ #define CAN_ELIMINATE(FROM, TO) 1 /* Round up to a multiple of 16 bytes. */ #define ALPHA_ROUND(X) (((X) + 15) & ~ 15) /* Define the offset between two registers, one to be eliminated, and the other its replacement, at the start of a routine. */ #define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \ ((OFFSET) = alpha_initial_elimination_offset(FROM, TO)) /* Define this if stack space is still allocated for a parameter passed in a register. */ /* #define REG_PARM_STACK_SPACE */ /* Value is the number of bytes of arguments automatically popped when returning from a subroutine call. FUNDECL is the declaration node of the function (as a tree), FUNTYPE is the data type of the function (as a tree), or for a library call it is an identifier node for the subroutine name. SIZE is the number of bytes of arguments passed on the stack. */ #define RETURN_POPS_ARGS(FUNDECL,FUNTYPE,SIZE) 0 /* Define how to find the value returned by a function. VALTYPE is the data type of the value (as a tree). If the precise function being called is known, FUNC is its FUNCTION_DECL; otherwise, FUNC is 0. On Alpha the value is found in $0 for integer functions and $f0 for floating-point functions. */ #define FUNCTION_VALUE(VALTYPE, FUNC) \ function_value (VALTYPE, FUNC, VOIDmode) /* Define how to find the value returned by a library function assuming the value has mode MODE. */ #define LIBCALL_VALUE(MODE) \ function_value (NULL, NULL, MODE) /* 1 if N is a possible register number for a function value as seen by the caller. */ #define FUNCTION_VALUE_REGNO_P(N) \ ((N) == 0 || (N) == 1 || (N) == 32 || (N) == 33) /* 1 if N is a possible register number for function argument passing. On Alpha, these are $16-$21 and $f16-$f21. */ #define FUNCTION_ARG_REGNO_P(N) \ (((N) >= 16 && (N) <= 21) || ((N) >= 16 + 32 && (N) <= 21 + 32)) /* Define a data type for recording info about an argument list during the scan of that argument list. This data type should hold all necessary information about the function itself and about the args processed so far, enough to enable macros such as FUNCTION_ARG to determine where the next arg should go. On Alpha, this is a single integer, which is a number of words of arguments scanned so far. Thus 6 or more means all following args should go on the stack. */ #define CUMULATIVE_ARGS int /* Initialize a variable CUM of type CUMULATIVE_ARGS for a call to a function whose data type is FNTYPE. For a library call, FNTYPE is 0. */ #define INIT_CUMULATIVE_ARGS(CUM, FNTYPE, LIBNAME, INDIRECT, N_NAMED_ARGS) \ (CUM) = 0 /* Define intermediate macro to compute the size (in registers) of an argument for the Alpha. */ #define ALPHA_ARG_SIZE(MODE, TYPE, NAMED) \ ((MODE) == TFmode || (MODE) == TCmode ? 1 \ : (((MODE) == BLKmode ? int_size_in_bytes (TYPE) : GET_MODE_SIZE (MODE)) \ + (UNITS_PER_WORD - 1)) / UNITS_PER_WORD) /* Update the data in CUM to advance over an argument of mode MODE and data type TYPE. (TYPE is null for libcalls where that information may not be available.) */ #define FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED) \ ((CUM) += \ (targetm.calls.must_pass_in_stack (MODE, TYPE)) \ ? 6 : ALPHA_ARG_SIZE (MODE, TYPE, NAMED)) /* Determine where to put an argument to a function. Value is zero to push the argument on the stack, or a hard register in which to store the argument. MODE is the argument's machine mode. TYPE is the data type of the argument (as a tree). This is null for libcalls where that information may not be available. CUM is a variable of type CUMULATIVE_ARGS which gives info about the preceding args and about the function being called. NAMED is nonzero if this argument is a named parameter (otherwise it is an extra parameter matching an ellipsis). On Alpha the first 6 words of args are normally in registers and the rest are pushed. */ #define FUNCTION_ARG(CUM, MODE, TYPE, NAMED) \ function_arg((CUM), (MODE), (TYPE), (NAMED)) /* Try to output insns to set TARGET equal to the constant C if it can be done in less than N insns. Do all computations in MODE. Returns the place where the output has been placed if it can be done and the insns have been emitted. If it would take more than N insns, zero is returned and no insns and emitted. */ /* Define the information needed to generate branch and scc insns. This is stored from the compare operation. Note that we can't use "rtx" here since it hasn't been defined! */ struct alpha_compare { struct rtx_def *op0, *op1; int fp_p; }; extern struct alpha_compare alpha_compare; /* Make (or fake) .linkage entry for function call. IS_LOCAL is 0 if name is used in call, 1 if name is used in definition. */ /* This macro defines the start of an assembly comment. */ #define ASM_COMMENT_START " #" /* This macro produces the initial definition of a function. */ #define ASM_DECLARE_FUNCTION_NAME(FILE,NAME,DECL) \ alpha_start_function(FILE,NAME,DECL); /* This macro closes up a function definition for the assembler. */ #define ASM_DECLARE_FUNCTION_SIZE(FILE,NAME,DECL) \ alpha_end_function(FILE,NAME,DECL) /* Output any profiling code before the prologue. */ #define PROFILE_BEFORE_PROLOGUE 1 /* Never use profile counters. */ #define NO_PROFILE_COUNTERS 1 /* Output assembler code to FILE to increment profiler label # LABELNO for profiling a function entry. Under OSF/1, profiling is enabled by simply passing -pg to the assembler and linker. */ #define FUNCTION_PROFILER(FILE, LABELNO) /* EXIT_IGNORE_STACK should be nonzero if, when returning from a function, the stack pointer does not matter. The value is tested only in functions that have frame pointers. No definition is equivalent to always zero. */ #define EXIT_IGNORE_STACK 1 /* Define registers used by the epilogue and return instruction. */ #define EPILOGUE_USES(REGNO) ((REGNO) == 26) /* Output assembler code for a block containing the constant parts of a trampoline, leaving space for the variable parts. The trampoline should set the static chain pointer to value placed into the trampoline and should branch to the specified routine. Note that $27 has been set to the address of the trampoline, so we can use it for addressability of the two data items. */ #define TRAMPOLINE_TEMPLATE(FILE) \ do { \ fprintf (FILE, "\tldq $1,24($27)\n"); \ fprintf (FILE, "\tldq $27,16($27)\n"); \ fprintf (FILE, "\tjmp $31,($27),0\n"); \ fprintf (FILE, "\tnop\n"); \ fprintf (FILE, "\t.quad 0,0\n"); \ } while (0) /* Section in which to place the trampoline. On Alpha, instructions may only be placed in a text segment. */ #define TRAMPOLINE_SECTION text_section /* Length in units of the trampoline for entering a nested function. */ #define TRAMPOLINE_SIZE 32 /* The alignment of a trampoline, in bits. */ #define TRAMPOLINE_ALIGNMENT 64 /* Emit RTL insns to initialize the variable parts of a trampoline. FNADDR is an RTX for the address of the function's pure code. CXT is an RTX for the static chain value for the function. */ #define INITIALIZE_TRAMPOLINE(TRAMP, FNADDR, CXT) \ alpha_initialize_trampoline (TRAMP, FNADDR, CXT, 16, 24, 8) /* A C expression whose value is RTL representing the value of the return address for the frame COUNT steps up from the current frame. FRAMEADDR is the frame pointer of the COUNT frame, or the frame pointer of the COUNT-1 frame if RETURN_ADDR_IN_PREVIOUS_FRAME is defined. */ #define RETURN_ADDR_RTX alpha_return_addr /* Before the prologue, RA lives in $26. */ #define INCOMING_RETURN_ADDR_RTX gen_rtx_REG (Pmode, 26) #define DWARF_FRAME_RETURN_COLUMN DWARF_FRAME_REGNUM (26) #define DWARF_ALT_FRAME_RETURN_COLUMN DWARF_FRAME_REGNUM (64) #define DWARF_ZERO_REG 31 /* Describe how we implement __builtin_eh_return. */ #define EH_RETURN_DATA_REGNO(N) ((N) < 4 ? (N) + 16 : INVALID_REGNUM) #define EH_RETURN_STACKADJ_RTX gen_rtx_REG (Pmode, 28) #define EH_RETURN_HANDLER_RTX \ gen_rtx_MEM (Pmode, plus_constant (stack_pointer_rtx, \ current_function_outgoing_args_size)) /* Addressing modes, and classification of registers for them. */ /* Macros to check register numbers against specific register classes. */ /* These assume that REGNO is a hard or pseudo reg number. They give nonzero only if REGNO is a hard reg of the suitable class or a pseudo reg currently allocated to a suitable hard reg. Since they use reg_renumber, they are safe only once reg_renumber has been allocated, which happens in local-alloc.c. */ #define REGNO_OK_FOR_INDEX_P(REGNO) 0 #define REGNO_OK_FOR_BASE_P(REGNO) \ ((REGNO) < 32 || (unsigned) reg_renumber[REGNO] < 32 \ || (REGNO) == 63 || reg_renumber[REGNO] == 63) /* Maximum number of registers that can appear in a valid memory address. */ #define MAX_REGS_PER_ADDRESS 1 /* Recognize any constant value that is a valid address. For the Alpha, there are only constants none since we want to use LDA to load any symbolic addresses into registers. */ #define CONSTANT_ADDRESS_P(X) \ (GET_CODE (X) == CONST_INT \ && (unsigned HOST_WIDE_INT) (INTVAL (X) + 0x8000) < 0x10000) /* Include all constant integers and constant doubles, but not floating-point, except for floating-point zero. */ #define LEGITIMATE_CONSTANT_P alpha_legitimate_constant_p /* The macros REG_OK_FOR..._P assume that the arg is a REG rtx and check its validity for a certain class. We have two alternate definitions for each of them. The usual definition accepts all pseudo regs; the other rejects them unless they have been allocated suitable hard regs. The symbol REG_OK_STRICT causes the latter definition to be used. Most source files want to accept pseudo regs in the hope that they will get allocated to the class that the insn wants them to be in. Source files for reload pass need to be strict. After reload, it makes no difference, since pseudo regs have been eliminated by then. */ /* Nonzero if X is a hard reg that can be used as an index or if it is a pseudo reg. */ #define REG_OK_FOR_INDEX_P(X) 0 /* Nonzero if X is a hard reg that can be used as a base reg or if it is a pseudo reg. */ #define NONSTRICT_REG_OK_FOR_BASE_P(X) \ (REGNO (X) < 32 || REGNO (X) == 63 || REGNO (X) >= FIRST_PSEUDO_REGISTER) /* ??? Nonzero if X is the frame pointer, or some virtual register that may eliminate to the frame pointer. These will be allowed to have offsets greater than 32K. This is done because register elimination offsets will change the hi/lo split, and if we split before reload, we will require additional instructions. */ #define NONSTRICT_REG_OK_FP_BASE_P(X) \ (REGNO (X) == 31 || REGNO (X) == 63 \ || (REGNO (X) >= FIRST_PSEUDO_REGISTER \ && REGNO (X) < LAST_VIRTUAL_REGISTER)) /* Nonzero if X is a hard reg that can be used as a base reg. */ #define STRICT_REG_OK_FOR_BASE_P(X) REGNO_OK_FOR_BASE_P (REGNO (X)) #ifdef REG_OK_STRICT #define REG_OK_FOR_BASE_P(X) STRICT_REG_OK_FOR_BASE_P (X) #else #define REG_OK_FOR_BASE_P(X) NONSTRICT_REG_OK_FOR_BASE_P (X) #endif /* GO_IF_LEGITIMATE_ADDRESS recognizes an RTL expression that is a valid memory address for an instruction. */ #ifdef REG_OK_STRICT #define GO_IF_LEGITIMATE_ADDRESS(MODE, X, WIN) \ do { \ if (alpha_legitimate_address_p (MODE, X, 1)) \ goto WIN; \ } while (0) #else #define GO_IF_LEGITIMATE_ADDRESS(MODE, X, WIN) \ do { \ if (alpha_legitimate_address_p (MODE, X, 0)) \ goto WIN; \ } while (0) #endif /* Try machine-dependent ways of modifying an illegitimate address to be legitimate. If we find one, return the new, valid address. This macro is used in only one place: `memory_address' in explow.c. */ #define LEGITIMIZE_ADDRESS(X,OLDX,MODE,WIN) \ do { \ rtx new_x = alpha_legitimize_address (X, NULL_RTX, MODE); \ if (new_x) \ { \ X = new_x; \ goto WIN; \ } \ } while (0) /* Try a machine-dependent way of reloading an illegitimate address operand. If we find one, push the reload and jump to WIN. This macro is used in only one place: `find_reloads_address' in reload.c. */ #define LEGITIMIZE_RELOAD_ADDRESS(X,MODE,OPNUM,TYPE,IND_L,WIN) \ do { \ rtx new_x = alpha_legitimize_reload_address (X, MODE, OPNUM, TYPE, IND_L); \ if (new_x) \ { \ X = new_x; \ goto WIN; \ } \ } while (0) /* Go to LABEL if ADDR (a legitimate address expression) has an effect that depends on the machine mode it is used for. On the Alpha this is true only for the unaligned modes. We can simplify this test since we know that the address must be valid. */ #define GO_IF_MODE_DEPENDENT_ADDRESS(ADDR,LABEL) \ { if (GET_CODE (ADDR) == AND) goto LABEL; } /* Specify the machine mode that this machine uses for the index in the tablejump instruction. */ #define CASE_VECTOR_MODE SImode /* Define as C expression which evaluates to nonzero if the tablejump instruction expects the table to contain offsets from the address of the table. Do not define this if the table should contain absolute addresses. On the Alpha, the table is really GP-relative, not relative to the PC of the table, but we pretend that it is PC-relative; this should be OK, but we should try to find some better way sometime. */ #define CASE_VECTOR_PC_RELATIVE 1 /* Define this as 1 if `char' should by default be signed; else as 0. */ #define DEFAULT_SIGNED_CHAR 1 /* Max number of bytes we can move to or from memory in one reasonably fast instruction. */ #define MOVE_MAX 8 /* If a memory-to-memory move would take MOVE_RATIO or more simple move-instruction pairs, we will do a movmem or libcall instead. Without byte/word accesses, we want no more than four instructions; with, several single byte accesses are better. */ #define MOVE_RATIO (TARGET_BWX ? 7 : 2) /* Largest number of bytes of an object that can be placed in a register. On the Alpha we have plenty of registers, so use TImode. */ #define MAX_FIXED_MODE_SIZE GET_MODE_BITSIZE (TImode) /* Nonzero if access to memory by bytes is no faster than for words. Also nonzero if doing byte operations (specifically shifts) in registers is undesirable. On the Alpha, we want to not use the byte operation and instead use masking operations to access fields; these will save instructions. */ #define SLOW_BYTE_ACCESS 1 /* Define if operations between registers always perform the operation on the full register even if a narrower mode is specified. */ #define WORD_REGISTER_OPERATIONS /* Define if loading in MODE, an integral mode narrower than BITS_PER_WORD will either zero-extend or sign-extend. The value of this macro should be the code that says which one of the two operations is implicitly done, UNKNOWN if none. */ #define LOAD_EXTEND_OP(MODE) ((MODE) == SImode ? SIGN_EXTEND : ZERO_EXTEND) /* Define if loading short immediate values into registers sign extends. */ #define SHORT_IMMEDIATES_SIGN_EXTEND /* Value is 1 if truncating an integer of INPREC bits to OUTPREC bits is done just by pretending it is already truncated. */ #define TRULY_NOOP_TRUNCATION(OUTPREC, INPREC) 1 /* The CIX ctlz and cttz instructions return 64 for zero. */ #define CLZ_DEFINED_VALUE_AT_ZERO(MODE, VALUE) ((VALUE) = 64, TARGET_CIX) #define CTZ_DEFINED_VALUE_AT_ZERO(MODE, VALUE) ((VALUE) = 64, TARGET_CIX) /* Define the value returned by a floating-point comparison instruction. */ #define FLOAT_STORE_FLAG_VALUE(MODE) \ REAL_VALUE_ATOF ((TARGET_FLOAT_VAX ? "0.5" : "2.0"), (MODE)) /* Canonicalize a comparison from one we don't have to one we do have. */ #define CANONICALIZE_COMPARISON(CODE,OP0,OP1) \ do { \ if (((CODE) == GE || (CODE) == GT || (CODE) == GEU || (CODE) == GTU) \ && (GET_CODE (OP1) == REG || (OP1) == const0_rtx)) \ { \ rtx tem = (OP0); \ (OP0) = (OP1); \ (OP1) = tem; \ (CODE) = swap_condition (CODE); \ } \ if (((CODE) == LT || (CODE) == LTU) \ && GET_CODE (OP1) == CONST_INT && INTVAL (OP1) == 256) \ { \ (CODE) = (CODE) == LT ? LE : LEU; \ (OP1) = GEN_INT (255); \ } \ } while (0) /* Specify the machine mode that pointers have. After generation of rtl, the compiler makes no further distinction between pointers and any other objects of this machine mode. */ #define Pmode DImode /* Mode of a function address in a call instruction (for indexing purposes). */ #define FUNCTION_MODE Pmode /* Define this if addresses of constant functions shouldn't be put through pseudo regs where they can be cse'd. Desirable on machines where ordinary constants are expensive but a CALL with constant address is cheap. We define this on the Alpha so that gen_call and gen_call_value get to see the SYMBOL_REF (for the hint field of the jsr). It will then copy it into a register, thus actually letting the address be cse'ed. */ #define NO_FUNCTION_CSE /* Define this to be nonzero if shift instructions ignore all but the low-order few bits. */ #define SHIFT_COUNT_TRUNCATED 1 /* Control the assembler format that we output. */ /* Output to assembler file text saying following lines may contain character constants, extra white space, comments, etc. */ #define ASM_APP_ON (TARGET_EXPLICIT_RELOCS ? "\t.set\tmacro\n" : "") /* Output to assembler file text saying following lines no longer contain unusual constructs. */ #define ASM_APP_OFF (TARGET_EXPLICIT_RELOCS ? "\t.set\tnomacro\n" : "") #define TEXT_SECTION_ASM_OP "\t.text" /* Output before read-only data. */ #define READONLY_DATA_SECTION_ASM_OP "\t.rdata" /* Output before writable data. */ #define DATA_SECTION_ASM_OP "\t.data" /* How to refer to registers in assembler output. This sequence is indexed by compiler's hard-register-number (see above). */ #define REGISTER_NAMES \ {"$0", "$1", "$2", "$3", "$4", "$5", "$6", "$7", "$8", \ "$9", "$10", "$11", "$12", "$13", "$14", "$15", \ "$16", "$17", "$18", "$19", "$20", "$21", "$22", "$23", \ "$24", "$25", "$26", "$27", "$28", "$29", "$30", "AP", \ "$f0", "$f1", "$f2", "$f3", "$f4", "$f5", "$f6", "$f7", "$f8", \ "$f9", "$f10", "$f11", "$f12", "$f13", "$f14", "$f15", \ "$f16", "$f17", "$f18", "$f19", "$f20", "$f21", "$f22", "$f23",\ "$f24", "$f25", "$f26", "$f27", "$f28", "$f29", "$f30", "FP"} /* Strip name encoding when emitting labels. */ #define ASM_OUTPUT_LABELREF(STREAM, NAME) \ do { \ const char *name_ = NAME; \ if (*name_ == '@' || *name_ == '%') \ name_ += 2; \ if (*name_ == '*') \ name_++; \ else \ fputs (user_label_prefix, STREAM); \ fputs (name_, STREAM); \ } while (0) /* Globalizing directive for a label. */ #define GLOBAL_ASM_OP "\t.globl " /* The prefix to add to user-visible assembler symbols. */ #define USER_LABEL_PREFIX "" /* This is how to output a label for a jump table. Arguments are the same as for (*targetm.asm_out.internal_label), except the insn for the jump table is passed. */ #define ASM_OUTPUT_CASE_LABEL(FILE,PREFIX,NUM,TABLEINSN) \ { ASM_OUTPUT_ALIGN (FILE, 2); (*targetm.asm_out.internal_label) (FILE, PREFIX, NUM); } /* This is how to store into the string LABEL the symbol_ref name of an internal numbered label where PREFIX is the class of label and NUM is the number within the class. This is suitable for output with `assemble_name'. */ #define ASM_GENERATE_INTERNAL_LABEL(LABEL,PREFIX,NUM) \ sprintf ((LABEL), "*$%s%ld", (PREFIX), (long)(NUM)) /* We use the default ASCII-output routine, except that we don't write more than 50 characters since the assembler doesn't support very long lines. */ #define ASM_OUTPUT_ASCII(MYFILE, MYSTRING, MYLENGTH) \ do { \ FILE *_hide_asm_out_file = (MYFILE); \ const unsigned char *_hide_p = (const unsigned char *) (MYSTRING); \ int _hide_thissize = (MYLENGTH); \ int _size_so_far = 0; \ { \ FILE *asm_out_file = _hide_asm_out_file; \ const unsigned char *p = _hide_p; \ int thissize = _hide_thissize; \ int i; \ fprintf (asm_out_file, "\t.ascii \""); \ \ for (i = 0; i < thissize; i++) \ { \ register int c = p[i]; \ \ if (_size_so_far ++ > 50 && i < thissize - 4) \ _size_so_far = 0, fprintf (asm_out_file, "\"\n\t.ascii \""); \ \ if (c == '\"' || c == '\\') \ putc ('\\', asm_out_file); \ if (c >= ' ' && c < 0177) \ putc (c, asm_out_file); \ else \ { \ fprintf (asm_out_file, "\\%o", c); \ /* After an octal-escape, if a digit follows, \ terminate one string constant and start another. \ The VAX assembler fails to stop reading the escape \ after three digits, so this is the only way we \ can get it to parse the data properly. */ \ if (i < thissize - 1 && ISDIGIT (p[i + 1])) \ _size_so_far = 0, fprintf (asm_out_file, "\"\n\t.ascii \""); \ } \ } \ fprintf (asm_out_file, "\"\n"); \ } \ } \ while (0) /* This is how to output an element of a case-vector that is relative. */ #define ASM_OUTPUT_ADDR_DIFF_ELT(FILE, BODY, VALUE, REL) \ fprintf (FILE, "\t.%s $L%d\n", TARGET_ABI_WINDOWS_NT ? "long" : "gprel32", \ (VALUE)) /* This is how to output an assembler line that says to advance the location counter to a multiple of 2**LOG bytes. */ #define ASM_OUTPUT_ALIGN(FILE,LOG) \ if ((LOG) != 0) \ fprintf (FILE, "\t.align %d\n", LOG); /* This is how to advance the location counter by SIZE bytes. */ #define ASM_OUTPUT_SKIP(FILE,SIZE) \ fprintf (FILE, "\t.space "HOST_WIDE_INT_PRINT_UNSIGNED"\n", (SIZE)) /* This says how to output an assembler line to define a global common symbol. */ #define ASM_OUTPUT_COMMON(FILE, NAME, SIZE, ROUNDED) \ ( fputs ("\t.comm ", (FILE)), \ assemble_name ((FILE), (NAME)), \ fprintf ((FILE), ","HOST_WIDE_INT_PRINT_UNSIGNED"\n", (SIZE))) /* This says how to output an assembler line to define a local common symbol. */ #define ASM_OUTPUT_LOCAL(FILE, NAME, SIZE,ROUNDED) \ ( fputs ("\t.lcomm ", (FILE)), \ assemble_name ((FILE), (NAME)), \ fprintf ((FILE), ","HOST_WIDE_INT_PRINT_UNSIGNED"\n", (SIZE))) /* Print operand X (an rtx) in assembler syntax to file FILE. CODE is a letter or dot (`z' in `%z0') or 0 if no letter was specified. For `%' followed by punctuation, CODE is the punctuation and X is null. */ #define PRINT_OPERAND(FILE, X, CODE) print_operand (FILE, X, CODE) /* Determine which codes are valid without a following integer. These must not be alphabetic. ~ Generates the name of the current function. / Generates the instruction suffix. The TRAP_SUFFIX and ROUND_SUFFIX attributes are examined to determine what is appropriate. , Generates single precision suffix for floating point instructions (s for IEEE, f for VAX) - Generates double precision suffix for floating point instructions (t for IEEE, g for VAX) */ #define PRINT_OPERAND_PUNCT_VALID_P(CODE) \ ((CODE) == '/' || (CODE) == ',' || (CODE) == '-' || (CODE) == '~' \ || (CODE) == '#' || (CODE) == '*' || (CODE) == '&') /* Print a memory address as an operand to reference that memory location. */ #define PRINT_OPERAND_ADDRESS(FILE, ADDR) \ print_operand_address((FILE), (ADDR)) /* Implement `va_start' for varargs and stdarg. */ #define EXPAND_BUILTIN_VA_START(valist, nextarg) \ alpha_va_start (valist, nextarg) /* Tell collect that the object format is ECOFF. */ #define OBJECT_FORMAT_COFF #define EXTENDED_COFF /* If we use NM, pass -g to it so it only lists globals. */ #define NM_FLAGS "-pg" /* Definitions for debugging. */ #define SDB_DEBUGGING_INFO 1 /* generate info for mips-tfile */ #define DBX_DEBUGGING_INFO 1 /* generate embedded stabs */ #define MIPS_DEBUGGING_INFO 1 /* MIPS specific debugging info */ #ifndef PREFERRED_DEBUGGING_TYPE /* assume SDB_DEBUGGING_INFO */ #define PREFERRED_DEBUGGING_TYPE SDB_DEBUG #endif /* Correct the offset of automatic variables and arguments. Note that the Alpha debug format wants all automatic variables and arguments to be in terms of two different offsets from the virtual frame pointer, which is the stack pointer before any adjustment in the function. The offset for the argument pointer is fixed for the native compiler, it is either zero (for the no arguments case) or large enough to hold all argument registers. The offset for the auto pointer is the fourth argument to the .frame directive (local_offset). To stay compatible with the native tools we use the same offsets from the virtual frame pointer and adjust the debugger arg/auto offsets accordingly. These debugger offsets are set up in output_prolog. */ extern long alpha_arg_offset; extern long alpha_auto_offset; #define DEBUGGER_AUTO_OFFSET(X) \ ((GET_CODE (X) == PLUS ? INTVAL (XEXP (X, 1)) : 0) + alpha_auto_offset) #define DEBUGGER_ARG_OFFSET(OFFSET, X) (OFFSET + alpha_arg_offset) /* mips-tfile doesn't understand .stabd directives. */ #define DBX_OUTPUT_SOURCE_LINE(STREAM, LINE, COUNTER) do { \ dbxout_begin_stabn_sline (LINE); \ dbxout_stab_value_internal_label ("LM", &COUNTER); \ } while (0) /* We want to use MIPS-style .loc directives for SDB line numbers. */ extern int num_source_filenames; #define SDB_OUTPUT_SOURCE_LINE(STREAM, LINE) \ fprintf (STREAM, "\t.loc\t%d %d\n", num_source_filenames, LINE) #define ASM_OUTPUT_SOURCE_FILENAME(STREAM, NAME) \ alpha_output_filename (STREAM, NAME) /* mips-tfile.c limits us to strings of one page. We must underestimate this number, because the real length runs past this up to the next continuation point. This is really a dbxout.c bug. */ #define DBX_CONTIN_LENGTH 3000 /* By default, turn on GDB extensions. */ #define DEFAULT_GDB_EXTENSIONS 1 /* Stabs-in-ECOFF can't handle dbxout_function_end(). */ #define NO_DBX_FUNCTION_END 1 /* If we are smuggling stabs through the ALPHA ECOFF object format, put a comment in front of the .stab operation so that the ALPHA assembler does not choke. The mips-tfile program will correctly put the stab into the object file. */ #define ASM_STABS_OP ((TARGET_GAS) ? "\t.stabs\t" : " #.stabs\t") #define ASM_STABN_OP ((TARGET_GAS) ? "\t.stabn\t" : " #.stabn\t") #define ASM_STABD_OP ((TARGET_GAS) ? "\t.stabd\t" : " #.stabd\t") /* Forward references to tags are allowed. */ #define SDB_ALLOW_FORWARD_REFERENCES /* Unknown tags are also allowed. */ #define SDB_ALLOW_UNKNOWN_REFERENCES #define PUT_SDB_DEF(a) \ do { \ fprintf (asm_out_file, "\t%s.def\t", \ (TARGET_GAS) ? "" : "#"); \ ASM_OUTPUT_LABELREF (asm_out_file, a); \ fputc (';', asm_out_file); \ } while (0) #define PUT_SDB_PLAIN_DEF(a) \ do { \ fprintf (asm_out_file, "\t%s.def\t.%s;", \ (TARGET_GAS) ? "" : "#", (a)); \ } while (0) #define PUT_SDB_TYPE(a) \ do { \ fprintf (asm_out_file, "\t.type\t0x%x;", (a)); \ } while (0) /* For block start and end, we create labels, so that later we can figure out where the correct offset is. The normal .ent/.end serve well enough for functions, so those are just commented out. */ extern int sdb_label_count; /* block start/end next label # */ #define PUT_SDB_BLOCK_START(LINE) \ do { \ fprintf (asm_out_file, \ "$Lb%d:\n\t%s.begin\t$Lb%d\t%d\n", \ sdb_label_count, \ (TARGET_GAS) ? "" : "#", \ sdb_label_count, \ (LINE)); \ sdb_label_count++; \ } while (0) #define PUT_SDB_BLOCK_END(LINE) \ do { \ fprintf (asm_out_file, \ "$Le%d:\n\t%s.bend\t$Le%d\t%d\n", \ sdb_label_count, \ (TARGET_GAS) ? "" : "#", \ sdb_label_count, \ (LINE)); \ sdb_label_count++; \ } while (0) #define PUT_SDB_FUNCTION_START(LINE) #define PUT_SDB_FUNCTION_END(LINE) #define PUT_SDB_EPILOGUE_END(NAME) ((void)(NAME)) /* Macros for mips-tfile.c to encapsulate stabs in ECOFF, and for mips-tdump.c to print them out. These must match the corresponding definitions in gdb/mipsread.c. Unfortunately, gcc and gdb do not currently share any directories. */ #define CODE_MASK 0x8F300 #define MIPS_IS_STAB(sym) (((sym)->index & 0xFFF00) == CODE_MASK) #define MIPS_MARK_STAB(code) ((code)+CODE_MASK) #define MIPS_UNMARK_STAB(code) ((code)-CODE_MASK) /* Override some mips-tfile definitions. */ #define SHASH_SIZE 511 #define THASH_SIZE 55 /* Align ecoff symbol tables to avoid OSF1/1.3 nm complaints. */ #define ALIGN_SYMTABLE_OFFSET(OFFSET) (((OFFSET) + 7) & ~7) /* The system headers under Alpha systems are generally C++-aware. */ #define NO_IMPLICIT_EXTERN_C