------------------------------------------------------------------------------ -- -- -- GNAT COMPILER COMPONENTS -- -- -- -- S E M _ E V A L -- -- -- -- B o d y -- -- -- -- Copyright (C) 1992-2018, Free Software Foundation, Inc. -- -- -- -- GNAT is free software; you can redistribute it and/or modify it under -- -- terms of the GNU General Public License as published by the Free Soft- -- -- ware Foundation; either version 3, or (at your option) any later ver- -- -- sion. GNAT is distributed in the hope that it will be useful, but WITH- -- -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -- -- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -- -- for more details. You should have received a copy of the GNU General -- -- Public License distributed with GNAT; see file COPYING3. If not, go to -- -- http://www.gnu.org/licenses for a complete copy of the license. -- -- -- -- GNAT was originally developed by the GNAT team at New York University. -- -- Extensive contributions were provided by Ada Core Technologies Inc. -- -- -- ------------------------------------------------------------------------------ with Aspects; use Aspects; with Atree; use Atree; with Checks; use Checks; with Debug; use Debug; with Einfo; use Einfo; with Elists; use Elists; with Errout; use Errout; with Eval_Fat; use Eval_Fat; with Exp_Util; use Exp_Util; with Freeze; use Freeze; with Lib; use Lib; with Namet; use Namet; with Nmake; use Nmake; with Nlists; use Nlists; with Opt; use Opt; with Par_SCO; use Par_SCO; with Rtsfind; use Rtsfind; with Sem; use Sem; with Sem_Aux; use Sem_Aux; with Sem_Cat; use Sem_Cat; with Sem_Ch6; use Sem_Ch6; with Sem_Ch8; use Sem_Ch8; with Sem_Res; use Sem_Res; with Sem_Util; use Sem_Util; with Sem_Type; use Sem_Type; with Sem_Warn; use Sem_Warn; with Sinfo; use Sinfo; with Snames; use Snames; with Stand; use Stand; with Stringt; use Stringt; with Tbuild; use Tbuild; package body Sem_Eval is ----------------------------------------- -- Handling of Compile Time Evaluation -- ----------------------------------------- -- The compile time evaluation of expressions is distributed over several -- Eval_xxx procedures. These procedures are called immediately after -- a subexpression is resolved and is therefore accomplished in a bottom -- up fashion. The flags are synthesized using the following approach. -- Is_Static_Expression is determined by following the detailed rules -- in RM 4.9(4-14). This involves testing the Is_Static_Expression -- flag of the operands in many cases. -- Raises_Constraint_Error is set if any of the operands have the flag -- set or if an attempt to compute the value of the current expression -- results in detection of a runtime constraint error. -- As described in the spec, the requirement is that Is_Static_Expression -- be accurately set, and in addition for nodes for which this flag is set, -- Raises_Constraint_Error must also be set. Furthermore a node which has -- Is_Static_Expression set, and Raises_Constraint_Error clear, then the -- requirement is that the expression value must be precomputed, and the -- node is either a literal, or the name of a constant entity whose value -- is a static expression. -- The general approach is as follows. First compute Is_Static_Expression. -- If the node is not static, then the flag is left off in the node and -- we are all done. Otherwise for a static node, we test if any of the -- operands will raise constraint error, and if so, propagate the flag -- Raises_Constraint_Error to the result node and we are done (since the -- error was already posted at a lower level). -- For the case of a static node whose operands do not raise constraint -- error, we attempt to evaluate the node. If this evaluation succeeds, -- then the node is replaced by the result of this computation. If the -- evaluation raises constraint error, then we rewrite the node with -- Apply_Compile_Time_Constraint_Error to raise the exception and also -- to post appropriate error messages. ---------------- -- Local Data -- ---------------- type Bits is array (Nat range <>) of Boolean; -- Used to convert unsigned (modular) values for folding logical ops -- The following declarations are used to maintain a cache of nodes that -- have compile time known values. The cache is maintained only for -- discrete types (the most common case), and is populated by calls to -- Compile_Time_Known_Value and Expr_Value, but only used by Expr_Value -- since it is possible for the status to change (in particular it is -- possible for a node to get replaced by a constraint error node). CV_Bits : constant := 5; -- Number of low order bits of Node_Id value used to reference entries -- in the cache table. CV_Cache_Size : constant Nat := 2 ** CV_Bits; -- Size of cache for compile time values subtype CV_Range is Nat range 0 .. CV_Cache_Size; type CV_Entry is record N : Node_Id; V : Uint; end record; type Match_Result is (Match, No_Match, Non_Static); -- Result returned from functions that test for a matching result. If the -- operands are not OK_Static then Non_Static will be returned. Otherwise -- Match/No_Match is returned depending on whether the match succeeds. type CV_Cache_Array is array (CV_Range) of CV_Entry; CV_Cache : CV_Cache_Array := (others => (Node_High_Bound, Uint_0)); -- This is the actual cache, with entries consisting of node/value pairs, -- and the impossible value Node_High_Bound used for unset entries. type Range_Membership is (In_Range, Out_Of_Range, Unknown); -- Range membership may either be statically known to be in range or out -- of range, or not statically known. Used for Test_In_Range below. ----------------------- -- Local Subprograms -- ----------------------- function Choice_Matches (Expr : Node_Id; Choice : Node_Id) return Match_Result; -- Determines whether given value Expr matches the given Choice. The Expr -- can be of discrete, real, or string type and must be a compile time -- known value (it is an error to make the call if these conditions are -- not met). The choice can be a range, subtype name, subtype indication, -- or expression. The returned result is Non_Static if Choice is not -- OK_Static, otherwise either Match or No_Match is returned depending -- on whether Choice matches Expr. This is used for case expression -- alternatives, and also for membership tests. In each case, more -- possibilities are tested than the syntax allows (e.g. membership allows -- subtype indications and non-discrete types, and case allows an OTHERS -- choice), but it does not matter, since we have already done a full -- semantic and syntax check of the construct, so the extra possibilities -- just will not arise for correct expressions. -- -- Note: if Choice_Matches finds that a choice raises Constraint_Error, e.g -- a reference to a type, one of whose bounds raises Constraint_Error, then -- it also sets the Raises_Constraint_Error flag on the Choice itself. function Choices_Match (Expr : Node_Id; Choices : List_Id) return Match_Result; -- This function applies Choice_Matches to each element of Choices. If the -- result is No_Match, then it continues and checks the next element. If -- the result is Match or Non_Static, this result is immediately given -- as the result without checking the rest of the list. Expr can be of -- discrete, real, or string type and must be a compile time known value -- (it is an error to make the call if these conditions are not met). function Find_Universal_Operator_Type (N : Node_Id) return Entity_Id; -- Check whether an arithmetic operation with universal operands which is a -- rewritten function call with an explicit scope indication is ambiguous: -- P."+" (1, 2) will be ambiguous if there is more than one visible numeric -- type declared in P and the context does not impose a type on the result -- (e.g. in the expression of a type conversion). If ambiguous, emit an -- error and return Empty, else return the result type of the operator. function From_Bits (B : Bits; T : Entity_Id) return Uint; -- Converts a bit string of length B'Length to a Uint value to be used for -- a target of type T, which is a modular type. This procedure includes the -- necessary reduction by the modulus in the case of a nonbinary modulus -- (for a binary modulus, the bit string is the right length any way so all -- is well). function Get_String_Val (N : Node_Id) return Node_Id; -- Given a tree node for a folded string or character value, returns the -- corresponding string literal or character literal (one of the two must -- be available, or the operand would not have been marked as foldable in -- the earlier analysis of the operation). function Is_OK_Static_Choice (Choice : Node_Id) return Boolean; -- Given a choice (from a case expression or membership test), returns -- True if the choice is static and does not raise a Constraint_Error. function Is_OK_Static_Choice_List (Choices : List_Id) return Boolean; -- Given a choice list (from a case expression or membership test), return -- True if all choices are static in the sense of Is_OK_Static_Choice. function Is_Static_Choice (Choice : Node_Id) return Boolean; -- Given a choice (from a case expression or membership test), returns -- True if the choice is static. No test is made for raising of constraint -- error, so this function is used only for legality tests. function Is_Static_Choice_List (Choices : List_Id) return Boolean; -- Given a choice list (from a case expression or membership test), return -- True if all choices are static in the sense of Is_Static_Choice. function Is_Static_Range (N : Node_Id) return Boolean; -- Determine if range is static, as defined in RM 4.9(26). The only allowed -- argument is an N_Range node (but note that the semantic analysis of -- equivalent range attribute references already turned them into the -- equivalent range). This differs from Is_OK_Static_Range (which is what -- must be used by clients) in that it does not care whether the bounds -- raise Constraint_Error or not. Used for checking whether expressions are -- static in the 4.9 sense (without worrying about exceptions). function OK_Bits (N : Node_Id; Bits : Uint) return Boolean; -- Bits represents the number of bits in an integer value to be computed -- (but the value has not been computed yet). If this value in Bits is -- reasonable, a result of True is returned, with the implication that the -- caller should go ahead and complete the calculation. If the value in -- Bits is unreasonably large, then an error is posted on node N, and -- False is returned (and the caller skips the proposed calculation). procedure Out_Of_Range (N : Node_Id); -- This procedure is called if it is determined that node N, which appears -- in a non-static context, is a compile time known value which is outside -- its range, i.e. the range of Etype. This is used in contexts where -- this is an illegality if N is static, and should generate a warning -- otherwise. function Real_Or_String_Static_Predicate_Matches (Val : Node_Id; Typ : Entity_Id) return Boolean; -- This is the function used to evaluate real or string static predicates. -- Val is an unanalyzed N_Real_Literal or N_String_Literal node, which -- represents the value to be tested against the predicate. Typ is the -- type with the predicate, from which the predicate expression can be -- extracted. The result returned is True if the given value satisfies -- the predicate. procedure Rewrite_In_Raise_CE (N : Node_Id; Exp : Node_Id); -- N and Exp are nodes representing an expression, Exp is known to raise -- CE. N is rewritten in term of Exp in the optimal way. function String_Type_Len (Stype : Entity_Id) return Uint; -- Given a string type, determines the length of the index type, or, if -- this index type is non-static, the length of the base type of this index -- type. Note that if the string type is itself static, then the index type -- is static, so the second case applies only if the string type passed is -- non-static. function Test (Cond : Boolean) return Uint; pragma Inline (Test); -- This function simply returns the appropriate Boolean'Pos value -- corresponding to the value of Cond as a universal integer. It is -- used for producing the result of the static evaluation of the -- logical operators procedure Test_Expression_Is_Foldable (N : Node_Id; Op1 : Node_Id; Stat : out Boolean; Fold : out Boolean); -- Tests to see if expression N whose single operand is Op1 is foldable, -- i.e. the operand value is known at compile time. If the operation is -- foldable, then Fold is True on return, and Stat indicates whether the -- result is static (i.e. the operand was static). Note that it is quite -- possible for Fold to be True, and Stat to be False, since there are -- cases in which we know the value of an operand even though it is not -- technically static (e.g. the static lower bound of a range whose upper -- bound is non-static). -- -- If Stat is set False on return, then Test_Expression_Is_Foldable makes -- a call to Check_Non_Static_Context on the operand. If Fold is False on -- return, then all processing is complete, and the caller should return, -- since there is nothing else to do. -- -- If Stat is set True on return, then Is_Static_Expression is also set -- true in node N. There are some cases where this is over-enthusiastic, -- e.g. in the two operand case below, for string comparison, the result is -- not static even though the two operands are static. In such cases, the -- caller must reset the Is_Static_Expression flag in N. -- -- If Fold and Stat are both set to False then this routine performs also -- the following extra actions: -- -- If either operand is Any_Type then propagate it to result to prevent -- cascaded errors. -- -- If some operand raises constraint error, then replace the node N -- with the raise constraint error node. This replacement inherits the -- Is_Static_Expression flag from the operands. procedure Test_Expression_Is_Foldable (N : Node_Id; Op1 : Node_Id; Op2 : Node_Id; Stat : out Boolean; Fold : out Boolean; CRT_Safe : Boolean := False); -- Same processing, except applies to an expression N with two operands -- Op1 and Op2. The result is static only if both operands are static. If -- CRT_Safe is set True, then CRT_Safe_Compile_Time_Known_Value is used -- for the tests that the two operands are known at compile time. See -- spec of this routine for further details. function Test_In_Range (N : Node_Id; Typ : Entity_Id; Assume_Valid : Boolean; Fixed_Int : Boolean; Int_Real : Boolean) return Range_Membership; -- Common processing for Is_In_Range and Is_Out_Of_Range: Returns In_Range -- or Out_Of_Range if it can be guaranteed at compile time that expression -- N is known to be in or out of range of the subtype Typ. If not compile -- time known, Unknown is returned. See documentation of Is_In_Range for -- complete description of parameters. procedure To_Bits (U : Uint; B : out Bits); -- Converts a Uint value to a bit string of length B'Length ----------------------------------------------- -- Check_Expression_Against_Static_Predicate -- ----------------------------------------------- procedure Check_Expression_Against_Static_Predicate (Expr : Node_Id; Typ : Entity_Id) is begin -- Nothing to do if expression is not known at compile time, or the -- type has no static predicate set (will be the case for all non-scalar -- types, so no need to make a special test for that). if not (Has_Static_Predicate (Typ) and then Compile_Time_Known_Value (Expr)) then return; end if; -- Here we have a static predicate (note that it could have arisen from -- an explicitly specified Dynamic_Predicate whose expression met the -- rules for being predicate-static). If the expression is known at -- compile time and obeys the predicate, then it is static and must be -- labeled as such, which matters e.g. for case statements. The original -- expression may be a type conversion of a variable with a known value, -- which might otherwise not be marked static. -- Case of real static predicate if Is_Real_Type (Typ) then if Real_Or_String_Static_Predicate_Matches (Val => Make_Real_Literal (Sloc (Expr), Expr_Value_R (Expr)), Typ => Typ) then Set_Is_Static_Expression (Expr); return; end if; -- Case of string static predicate elsif Is_String_Type (Typ) then if Real_Or_String_Static_Predicate_Matches (Val => Expr_Value_S (Expr), Typ => Typ) then Set_Is_Static_Expression (Expr); return; end if; -- Case of discrete static predicate else pragma Assert (Is_Discrete_Type (Typ)); -- If static predicate matches, nothing to do if Choices_Match (Expr, Static_Discrete_Predicate (Typ)) = Match then Set_Is_Static_Expression (Expr); return; end if; end if; -- Here we know that the predicate will fail -- Special case of static expression failing a predicate (other than one -- that was explicitly specified with a Dynamic_Predicate aspect). This -- is the case where the expression is no longer considered static. if Is_Static_Expression (Expr) and then not Has_Dynamic_Predicate_Aspect (Typ) then Error_Msg_NE ("??static expression fails static predicate check on &", Expr, Typ); Error_Msg_N ("\??expression is no longer considered static", Expr); Set_Is_Static_Expression (Expr, False); -- In all other cases, this is just a warning that a test will fail. -- It does not matter if the expression is static or not, or if the -- predicate comes from a dynamic predicate aspect or not. else Error_Msg_NE ("??expression fails predicate check on &", Expr, Typ); end if; end Check_Expression_Against_Static_Predicate; ------------------------------ -- Check_Non_Static_Context -- ------------------------------ procedure Check_Non_Static_Context (N : Node_Id) is T : constant Entity_Id := Etype (N); Checks_On : constant Boolean := not Index_Checks_Suppressed (T) and not Range_Checks_Suppressed (T); begin -- Ignore cases of non-scalar types, error types, or universal real -- types that have no usable bounds. if T = Any_Type or else not Is_Scalar_Type (T) or else T = Universal_Fixed or else T = Universal_Real then return; end if; -- At this stage we have a scalar type. If we have an expression that -- raises CE, then we already issued a warning or error msg so there is -- nothing more to be done in this routine. if Raises_Constraint_Error (N) then return; end if; -- Now we have a scalar type which is not marked as raising a constraint -- error exception. The main purpose of this routine is to deal with -- static expressions appearing in a non-static context. That means -- that if we do not have a static expression then there is not much -- to do. The one case that we deal with here is that if we have a -- floating-point value that is out of range, then we post a warning -- that an infinity will result. if not Is_Static_Expression (N) then if Is_Floating_Point_Type (T) then if Is_Out_Of_Range (N, Base_Type (T), Assume_Valid => True) then Error_Msg_N ("??float value out of range, infinity will be generated", N); -- The literal may be the result of constant-folding of a non- -- static subexpression of a larger expression (e.g. a conversion -- of a non-static variable whose value happens to be known). At -- this point we must reduce the value of the subexpression to a -- machine number (RM 4.9 (38/2)). elsif Nkind (N) = N_Real_Literal and then Nkind (Parent (N)) in N_Subexpr then Rewrite (N, New_Copy (N)); Set_Realval (N, Machine (Base_Type (T), Realval (N), Round_Even, N)); end if; end if; return; end if; -- Here we have the case of outer level static expression of scalar -- type, where the processing of this procedure is needed. -- For real types, this is where we convert the value to a machine -- number (see RM 4.9(38)). Also see ACVC test C490001. We should only -- need to do this if the parent is a constant declaration, since in -- other cases, gigi should do the necessary conversion correctly, but -- experimentation shows that this is not the case on all machines, in -- particular if we do not convert all literals to machine values in -- non-static contexts, then ACVC test C490001 fails on Sparc/Solaris -- and SGI/Irix. -- This conversion is always done by GNATprove on real literals in -- non-static expressions, by calling Check_Non_Static_Context from -- gnat2why, as GNATprove cannot do the conversion later contrary -- to gigi. The frontend computes the information about which -- expressions are static, which is used by gnat2why to call -- Check_Non_Static_Context on exactly those real literals that are -- not subexpressions of static expressions. if Nkind (N) = N_Real_Literal and then not Is_Machine_Number (N) and then not Is_Generic_Type (Etype (N)) and then Etype (N) /= Universal_Real then -- Check that value is in bounds before converting to machine -- number, so as not to lose case where value overflows in the -- least significant bit or less. See B490001. if Is_Out_Of_Range (N, Base_Type (T), Assume_Valid => True) then Out_Of_Range (N); return; end if; -- Note: we have to copy the node, to avoid problems with conformance -- of very similar numbers (see ACVC tests B4A010C and B63103A). Rewrite (N, New_Copy (N)); if not Is_Floating_Point_Type (T) then Set_Realval (N, Corresponding_Integer_Value (N) * Small_Value (T)); elsif not UR_Is_Zero (Realval (N)) then -- Note: even though RM 4.9(38) specifies biased rounding, this -- has been modified by AI-100 in order to prevent confusing -- differences in rounding between static and non-static -- expressions. AI-100 specifies that the effect of such rounding -- is implementation dependent, and in GNAT we round to nearest -- even to match the run-time behavior. Note that this applies -- to floating point literals, not fixed points ones, even though -- their compiler representation is also as a universal real. Set_Realval (N, Machine (Base_Type (T), Realval (N), Round_Even, N)); Set_Is_Machine_Number (N); end if; end if; -- Check for out of range universal integer. This is a non-static -- context, so the integer value must be in range of the runtime -- representation of universal integers. -- We do this only within an expression, because that is the only -- case in which non-static universal integer values can occur, and -- furthermore, Check_Non_Static_Context is currently (incorrectly???) -- called in contexts like the expression of a number declaration where -- we certainly want to allow out of range values. if Etype (N) = Universal_Integer and then Nkind (N) = N_Integer_Literal and then Nkind (Parent (N)) in N_Subexpr and then (Intval (N) < Expr_Value (Type_Low_Bound (Universal_Integer)) or else Intval (N) > Expr_Value (Type_High_Bound (Universal_Integer))) then Apply_Compile_Time_Constraint_Error (N, "non-static universal integer value out of range<<", CE_Range_Check_Failed); -- Check out of range of base type elsif Is_Out_Of_Range (N, Base_Type (T), Assume_Valid => True) then Out_Of_Range (N); -- Give warning if outside subtype (where one or both of the bounds of -- the subtype is static). This warning is omitted if the expression -- appears in a range that could be null (warnings are handled elsewhere -- for this case). elsif T /= Base_Type (T) and then Nkind (Parent (N)) /= N_Range then if Is_In_Range (N, T, Assume_Valid => True) then null; elsif Is_Out_Of_Range (N, T, Assume_Valid => True) then Apply_Compile_Time_Constraint_Error (N, "value not in range of}<<", CE_Range_Check_Failed); elsif Checks_On then Enable_Range_Check (N); else Set_Do_Range_Check (N, False); end if; end if; end Check_Non_Static_Context; --------------------------------- -- Check_String_Literal_Length -- --------------------------------- procedure Check_String_Literal_Length (N : Node_Id; Ttype : Entity_Id) is begin if not Raises_Constraint_Error (N) and then Is_Constrained (Ttype) then if UI_From_Int (String_Length (Strval (N))) /= String_Type_Len (Ttype) then Apply_Compile_Time_Constraint_Error (N, "string length wrong for}??", CE_Length_Check_Failed, Ent => Ttype, Typ => Ttype); end if; end if; end Check_String_Literal_Length; -------------------- -- Choice_Matches -- -------------------- function Choice_Matches (Expr : Node_Id; Choice : Node_Id) return Match_Result is Etyp : constant Entity_Id := Etype (Expr); Val : Uint; ValR : Ureal; ValS : Node_Id; begin pragma Assert (Compile_Time_Known_Value (Expr)); pragma Assert (Is_Scalar_Type (Etyp) or else Is_String_Type (Etyp)); if not Is_OK_Static_Choice (Choice) then Set_Raises_Constraint_Error (Choice); return Non_Static; -- When the choice denotes a subtype with a static predictate, check the -- expression against the predicate values. Different procedures apply -- to discrete and non-discrete types. elsif (Nkind (Choice) = N_Subtype_Indication or else (Is_Entity_Name (Choice) and then Is_Type (Entity (Choice)))) and then Has_Predicates (Etype (Choice)) and then Has_Static_Predicate (Etype (Choice)) then if Is_Discrete_Type (Etype (Choice)) then return Choices_Match (Expr, Static_Discrete_Predicate (Etype (Choice))); elsif Real_Or_String_Static_Predicate_Matches (Expr, Etype (Choice)) then return Match; else return No_Match; end if; -- Discrete type case only elsif Is_Discrete_Type (Etyp) then Val := Expr_Value (Expr); if Nkind (Choice) = N_Range then if Val >= Expr_Value (Low_Bound (Choice)) and then Val <= Expr_Value (High_Bound (Choice)) then return Match; else return No_Match; end if; elsif Nkind (Choice) = N_Subtype_Indication or else (Is_Entity_Name (Choice) and then Is_Type (Entity (Choice))) then if Val >= Expr_Value (Type_Low_Bound (Etype (Choice))) and then Val <= Expr_Value (Type_High_Bound (Etype (Choice))) then return Match; else return No_Match; end if; elsif Nkind (Choice) = N_Others_Choice then return Match; else if Val = Expr_Value (Choice) then return Match; else return No_Match; end if; end if; -- Real type case elsif Is_Real_Type (Etyp) then ValR := Expr_Value_R (Expr); if Nkind (Choice) = N_Range then if ValR >= Expr_Value_R (Low_Bound (Choice)) and then ValR <= Expr_Value_R (High_Bound (Choice)) then return Match; else return No_Match; end if; elsif Nkind (Choice) = N_Subtype_Indication or else (Is_Entity_Name (Choice) and then Is_Type (Entity (Choice))) then if ValR >= Expr_Value_R (Type_Low_Bound (Etype (Choice))) and then ValR <= Expr_Value_R (Type_High_Bound (Etype (Choice))) then return Match; else return No_Match; end if; else if ValR = Expr_Value_R (Choice) then return Match; else return No_Match; end if; end if; -- String type cases else pragma Assert (Is_String_Type (Etyp)); ValS := Expr_Value_S (Expr); if Nkind (Choice) = N_Subtype_Indication or else (Is_Entity_Name (Choice) and then Is_Type (Entity (Choice))) then if not Is_Constrained (Etype (Choice)) then return Match; else declare Typlen : constant Uint := String_Type_Len (Etype (Choice)); Strlen : constant Uint := UI_From_Int (String_Length (Strval (ValS))); begin if Typlen = Strlen then return Match; else return No_Match; end if; end; end if; else if String_Equal (Strval (ValS), Strval (Expr_Value_S (Choice))) then return Match; else return No_Match; end if; end if; end if; end Choice_Matches; ------------------- -- Choices_Match -- ------------------- function Choices_Match (Expr : Node_Id; Choices : List_Id) return Match_Result is Choice : Node_Id; Result : Match_Result; begin Choice := First (Choices); while Present (Choice) loop Result := Choice_Matches (Expr, Choice); if Result /= No_Match then return Result; end if; Next (Choice); end loop; return No_Match; end Choices_Match; -------------------------- -- Compile_Time_Compare -- -------------------------- function Compile_Time_Compare (L, R : Node_Id; Assume_Valid : Boolean) return Compare_Result is Discard : aliased Uint; begin return Compile_Time_Compare (L, R, Discard'Access, Assume_Valid); end Compile_Time_Compare; function Compile_Time_Compare (L, R : Node_Id; Diff : access Uint; Assume_Valid : Boolean; Rec : Boolean := False) return Compare_Result is Ltyp : Entity_Id := Etype (L); Rtyp : Entity_Id := Etype (R); Discard : aliased Uint; procedure Compare_Decompose (N : Node_Id; R : out Node_Id; V : out Uint); -- This procedure decomposes the node N into an expression node and a -- signed offset, so that the value of N is equal to the value of R plus -- the value V (which may be negative). If no such decomposition is -- possible, then on return R is a copy of N, and V is set to zero. function Compare_Fixup (N : Node_Id) return Node_Id; -- This function deals with replacing 'Last and 'First references with -- their corresponding type bounds, which we then can compare. The -- argument is the original node, the result is the identity, unless we -- have a 'Last/'First reference in which case the value returned is the -- appropriate type bound. function Is_Known_Valid_Operand (Opnd : Node_Id) return Boolean; -- Even if the context does not assume that values are valid, some -- simple cases can be recognized. function Is_Same_Value (L, R : Node_Id) return Boolean; -- Returns True iff L and R represent expressions that definitely have -- identical (but not necessarily compile time known) values Indeed the -- caller is expected to have already dealt with the cases of compile -- time known values, so these are not tested here. ----------------------- -- Compare_Decompose -- ----------------------- procedure Compare_Decompose (N : Node_Id; R : out Node_Id; V : out Uint) is begin if Nkind (N) = N_Op_Add and then Nkind (Right_Opnd (N)) = N_Integer_Literal then R := Left_Opnd (N); V := Intval (Right_Opnd (N)); return; elsif Nkind (N) = N_Op_Subtract and then Nkind (Right_Opnd (N)) = N_Integer_Literal then R := Left_Opnd (N); V := UI_Negate (Intval (Right_Opnd (N))); return; elsif Nkind (N) = N_Attribute_Reference then if Attribute_Name (N) = Name_Succ then R := First (Expressions (N)); V := Uint_1; return; elsif Attribute_Name (N) = Name_Pred then R := First (Expressions (N)); V := Uint_Minus_1; return; end if; end if; R := N; V := Uint_0; end Compare_Decompose; ------------------- -- Compare_Fixup -- ------------------- function Compare_Fixup (N : Node_Id) return Node_Id is Indx : Node_Id; Xtyp : Entity_Id; Subs : Nat; begin -- Fixup only required for First/Last attribute reference if Nkind (N) = N_Attribute_Reference and then Nam_In (Attribute_Name (N), Name_First, Name_Last) then Xtyp := Etype (Prefix (N)); -- If we have no type, then just abandon the attempt to do -- a fixup, this is probably the result of some other error. if No (Xtyp) then return N; end if; -- Dereference an access type if Is_Access_Type (Xtyp) then Xtyp := Designated_Type (Xtyp); end if; -- If we don't have an array type at this stage, something is -- peculiar, e.g. another error, and we abandon the attempt at -- a fixup. if not Is_Array_Type (Xtyp) then return N; end if; -- Ignore unconstrained array, since bounds are not meaningful if not Is_Constrained (Xtyp) then return N; end if; if Ekind (Xtyp) = E_String_Literal_Subtype then if Attribute_Name (N) = Name_First then return String_Literal_Low_Bound (Xtyp); else return Make_Integer_Literal (Sloc (N), Intval => Intval (String_Literal_Low_Bound (Xtyp)) + String_Literal_Length (Xtyp)); end if; end if; -- Find correct index type Indx := First_Index (Xtyp); if Present (Expressions (N)) then Subs := UI_To_Int (Expr_Value (First (Expressions (N)))); for J in 2 .. Subs loop Indx := Next_Index (Indx); end loop; end if; Xtyp := Etype (Indx); if Attribute_Name (N) = Name_First then return Type_Low_Bound (Xtyp); else return Type_High_Bound (Xtyp); end if; end if; return N; end Compare_Fixup; ---------------------------- -- Is_Known_Valid_Operand -- ---------------------------- function Is_Known_Valid_Operand (Opnd : Node_Id) return Boolean is begin return (Is_Entity_Name (Opnd) and then (Is_Known_Valid (Entity (Opnd)) or else Ekind (Entity (Opnd)) = E_In_Parameter or else (Ekind (Entity (Opnd)) in Object_Kind and then Present (Current_Value (Entity (Opnd)))))) or else Is_OK_Static_Expression (Opnd); end Is_Known_Valid_Operand; ------------------- -- Is_Same_Value -- ------------------- function Is_Same_Value (L, R : Node_Id) return Boolean is Lf : constant Node_Id := Compare_Fixup (L); Rf : constant Node_Id := Compare_Fixup (R); function Is_Same_Subscript (L, R : List_Id) return Boolean; -- L, R are the Expressions values from two attribute nodes for First -- or Last attributes. Either may be set to No_List if no expressions -- are present (indicating subscript 1). The result is True if both -- expressions represent the same subscript (note one case is where -- one subscript is missing and the other is explicitly set to 1). ----------------------- -- Is_Same_Subscript -- ----------------------- function Is_Same_Subscript (L, R : List_Id) return Boolean is begin if L = No_List then if R = No_List then return True; else return Expr_Value (First (R)) = Uint_1; end if; else if R = No_List then return Expr_Value (First (L)) = Uint_1; else return Expr_Value (First (L)) = Expr_Value (First (R)); end if; end if; end Is_Same_Subscript; -- Start of processing for Is_Same_Value begin -- Values are the same if they refer to the same entity and the -- entity is non-volatile. This does not however apply to Float -- types, since we may have two NaN values and they should never -- compare equal. -- If the entity is a discriminant, the two expressions may be bounds -- of components of objects of the same discriminated type. The -- values of the discriminants are not static, and therefore the -- result is unknown. -- It would be better to comment individual branches of this test ??? if Nkind_In (Lf, N_Identifier, N_Expanded_Name) and then Nkind_In (Rf, N_Identifier, N_Expanded_Name) and then Entity (Lf) = Entity (Rf) and then Ekind (Entity (Lf)) /= E_Discriminant and then Present (Entity (Lf)) and then not Is_Floating_Point_Type (Etype (L)) and then not Is_Volatile_Reference (L) and then not Is_Volatile_Reference (R) then return True; -- Or if they are compile time known and identical elsif Compile_Time_Known_Value (Lf) and then Compile_Time_Known_Value (Rf) and then Expr_Value (Lf) = Expr_Value (Rf) then return True; -- False if Nkind of the two nodes is different for remaining cases elsif Nkind (Lf) /= Nkind (Rf) then return False; -- True if both 'First or 'Last values applying to the same entity -- (first and last don't change even if value does). Note that we -- need this even with the calls to Compare_Fixup, to handle the -- case of unconstrained array attributes where Compare_Fixup -- cannot find useful bounds. elsif Nkind (Lf) = N_Attribute_Reference and then Attribute_Name (Lf) = Attribute_Name (Rf) and then Nam_In (Attribute_Name (Lf), Name_First, Name_Last) and then Nkind_In (Prefix (Lf), N_Identifier, N_Expanded_Name) and then Nkind_In (Prefix (Rf), N_Identifier, N_Expanded_Name) and then Entity (Prefix (Lf)) = Entity (Prefix (Rf)) and then Is_Same_Subscript (Expressions (Lf), Expressions (Rf)) then return True; -- True if the same selected component from the same record elsif Nkind (Lf) = N_Selected_Component and then Selector_Name (Lf) = Selector_Name (Rf) and then Is_Same_Value (Prefix (Lf), Prefix (Rf)) then return True; -- True if the same unary operator applied to the same operand elsif Nkind (Lf) in N_Unary_Op and then Is_Same_Value (Right_Opnd (Lf), Right_Opnd (Rf)) then return True; -- True if the same binary operator applied to the same operands elsif Nkind (Lf) in N_Binary_Op and then Is_Same_Value (Left_Opnd (Lf), Left_Opnd (Rf)) and then Is_Same_Value (Right_Opnd (Lf), Right_Opnd (Rf)) then return True; -- All other cases, we can't tell, so return False else return False; end if; end Is_Same_Value; -- Start of processing for Compile_Time_Compare begin Diff.all := No_Uint; -- In preanalysis mode, always return Unknown unless the expression -- is static. It is too early to be thinking we know the result of a -- comparison, save that judgment for the full analysis. This is -- particularly important in the case of pre and postconditions, which -- otherwise can be prematurely collapsed into having True or False -- conditions when this is inappropriate. if not (Full_Analysis or else (Is_OK_Static_Expression (L) and then Is_OK_Static_Expression (R))) then return Unknown; end if; -- If either operand could raise constraint error, then we cannot -- know the result at compile time (since CE may be raised). if not (Cannot_Raise_Constraint_Error (L) and then Cannot_Raise_Constraint_Error (R)) then return Unknown; end if; -- Identical operands are most certainly equal if L = R then return EQ; end if; -- If expressions have no types, then do not attempt to determine if -- they are the same, since something funny is going on. One case in -- which this happens is during generic template analysis, when bounds -- are not fully analyzed. if No (Ltyp) or else No (Rtyp) then return Unknown; end if; -- These get reset to the base type for the case of entities where -- Is_Known_Valid is not set. This takes care of handling possible -- invalid representations using the value of the base type, in -- accordance with RM 13.9.1(10). Ltyp := Underlying_Type (Ltyp); Rtyp := Underlying_Type (Rtyp); -- Same rationale as above, but for Underlying_Type instead of Etype if No (Ltyp) or else No (Rtyp) then return Unknown; end if; -- We do not attempt comparisons for packed arrays represented as -- modular types, where the semantics of comparison is quite different. if Is_Packed_Array_Impl_Type (Ltyp) and then Is_Modular_Integer_Type (Ltyp) then return Unknown; -- For access types, the only time we know the result at compile time -- (apart from identical operands, which we handled already) is if we -- know one operand is null and the other is not, or both operands are -- known null. elsif Is_Access_Type (Ltyp) then if Known_Null (L) then if Known_Null (R) then return EQ; elsif Known_Non_Null (R) then return NE; else return Unknown; end if; elsif Known_Non_Null (L) and then Known_Null (R) then return NE; else return Unknown; end if; -- Case where comparison involves two compile time known values elsif Compile_Time_Known_Value (L) and then Compile_Time_Known_Value (R) then -- For the floating-point case, we have to be a little careful, since -- at compile time we are dealing with universal exact values, but at -- runtime, these will be in non-exact target form. That's why the -- returned results are LE and GE below instead of LT and GT. if Is_Floating_Point_Type (Ltyp) or else Is_Floating_Point_Type (Rtyp) then declare Lo : constant Ureal := Expr_Value_R (L); Hi : constant Ureal := Expr_Value_R (R); begin if Lo < Hi then return LE; elsif Lo = Hi then return EQ; else return GE; end if; end; -- For string types, we have two string literals and we proceed to -- compare them using the Ada style dictionary string comparison. elsif not Is_Scalar_Type (Ltyp) then declare Lstring : constant String_Id := Strval (Expr_Value_S (L)); Rstring : constant String_Id := Strval (Expr_Value_S (R)); Llen : constant Nat := String_Length (Lstring); Rlen : constant Nat := String_Length (Rstring); begin for J in 1 .. Nat'Min (Llen, Rlen) loop declare LC : constant Char_Code := Get_String_Char (Lstring, J); RC : constant Char_Code := Get_String_Char (Rstring, J); begin if LC < RC then return LT; elsif LC > RC then return GT; end if; end; end loop; if Llen < Rlen then return LT; elsif Llen > Rlen then return GT; else return EQ; end if; end; -- For remaining scalar cases we know exactly (note that this does -- include the fixed-point case, where we know the run time integer -- values now). else declare Lo : constant Uint := Expr_Value (L); Hi : constant Uint := Expr_Value (R); begin if Lo < Hi then Diff.all := Hi - Lo; return LT; elsif Lo = Hi then return EQ; else Diff.all := Lo - Hi; return GT; end if; end; end if; -- Cases where at least one operand is not known at compile time else -- Remaining checks apply only for discrete types if not Is_Discrete_Type (Ltyp) or else not Is_Discrete_Type (Rtyp) then return Unknown; end if; -- Defend against generic types, or actually any expressions that -- contain a reference to a generic type from within a generic -- template. We don't want to do any range analysis of such -- expressions for two reasons. First, the bounds of a generic type -- itself are junk and cannot be used for any kind of analysis. -- Second, we may have a case where the range at run time is indeed -- known, but we don't want to do compile time analysis in the -- template based on that range since in an instance the value may be -- static, and able to be elaborated without reference to the bounds -- of types involved. As an example, consider: -- (F'Pos (F'Last) + 1) > Integer'Last -- The expression on the left side of > is Universal_Integer and thus -- acquires the type Integer for evaluation at run time, and at run -- time it is true that this condition is always False, but within -- an instance F may be a type with a static range greater than the -- range of Integer, and the expression statically evaluates to True. if References_Generic_Formal_Type (L) or else References_Generic_Formal_Type (R) then return Unknown; end if; -- Replace types by base types for the case of values which are not -- known to have valid representations. This takes care of properly -- dealing with invalid representations. if not Assume_Valid then if not (Is_Entity_Name (L) and then (Is_Known_Valid (Entity (L)) or else Assume_No_Invalid_Values)) then Ltyp := Underlying_Type (Base_Type (Ltyp)); end if; if not (Is_Entity_Name (R) and then (Is_Known_Valid (Entity (R)) or else Assume_No_Invalid_Values)) then Rtyp := Underlying_Type (Base_Type (Rtyp)); end if; end if; -- First attempt is to decompose the expressions to extract a -- constant offset resulting from the use of any of the forms: -- expr + literal -- expr - literal -- typ'Succ (expr) -- typ'Pred (expr) -- Then we see if the two expressions are the same value, and if so -- the result is obtained by comparing the offsets. -- Note: the reason we do this test first is that it returns only -- decisive results (with diff set), where other tests, like the -- range test, may not be as so decisive. Consider for example -- J .. J + 1. This code can conclude LT with a difference of 1, -- even if the range of J is not known. declare Lnode : Node_Id; Loffs : Uint; Rnode : Node_Id; Roffs : Uint; begin Compare_Decompose (L, Lnode, Loffs); Compare_Decompose (R, Rnode, Roffs); if Is_Same_Value (Lnode, Rnode) then if Loffs = Roffs then return EQ; end if; -- When the offsets are not equal, we can go farther only if -- the types are not modular (e.g. X < X + 1 is False if X is -- the largest number). if not Is_Modular_Integer_Type (Ltyp) and then not Is_Modular_Integer_Type (Rtyp) then if Loffs < Roffs then Diff.all := Roffs - Loffs; return LT; else Diff.all := Loffs - Roffs; return GT; end if; end if; end if; end; -- Next, try range analysis and see if operand ranges are disjoint declare LOK, ROK : Boolean; LLo, LHi : Uint; RLo, RHi : Uint; Single : Boolean; -- True if each range is a single point begin Determine_Range (L, LOK, LLo, LHi, Assume_Valid); Determine_Range (R, ROK, RLo, RHi, Assume_Valid); if LOK and ROK then Single := (LLo = LHi) and then (RLo = RHi); if LHi < RLo then if Single and Assume_Valid then Diff.all := RLo - LLo; end if; return LT; elsif RHi < LLo then if Single and Assume_Valid then Diff.all := LLo - RLo; end if; return GT; elsif Single and then LLo = RLo then -- If the range includes a single literal and we can assume -- validity then the result is known even if an operand is -- not static. if Assume_Valid then return EQ; else return Unknown; end if; elsif LHi = RLo then return LE; elsif RHi = LLo then return GE; elsif not Is_Known_Valid_Operand (L) and then not Assume_Valid then if Is_Same_Value (L, R) then return EQ; else return Unknown; end if; end if; -- If the range of either operand cannot be determined, nothing -- further can be inferred. else return Unknown; end if; end; -- Here is where we check for comparisons against maximum bounds of -- types, where we know that no value can be outside the bounds of -- the subtype. Note that this routine is allowed to assume that all -- expressions are within their subtype bounds. Callers wishing to -- deal with possibly invalid values must in any case take special -- steps (e.g. conversions to larger types) to avoid this kind of -- optimization, which is always considered to be valid. We do not -- attempt this optimization with generic types, since the type -- bounds may not be meaningful in this case. -- We are in danger of an infinite recursion here. It does not seem -- useful to go more than one level deep, so the parameter Rec is -- used to protect ourselves against this infinite recursion. if not Rec then -- See if we can get a decisive check against one operand and a -- bound of the other operand (four possible tests here). Note -- that we avoid testing junk bounds of a generic type. if not Is_Generic_Type (Rtyp) then case Compile_Time_Compare (L, Type_Low_Bound (Rtyp), Discard'Access, Assume_Valid, Rec => True) is when LT => return LT; when LE => return LE; when EQ => return LE; when others => null; end case; case Compile_Time_Compare (L, Type_High_Bound (Rtyp), Discard'Access, Assume_Valid, Rec => True) is when GT => return GT; when GE => return GE; when EQ => return GE; when others => null; end case; end if; if not Is_Generic_Type (Ltyp) then case Compile_Time_Compare (Type_Low_Bound (Ltyp), R, Discard'Access, Assume_Valid, Rec => True) is when GT => return GT; when GE => return GE; when EQ => return GE; when others => null; end case; case Compile_Time_Compare (Type_High_Bound (Ltyp), R, Discard'Access, Assume_Valid, Rec => True) is when LT => return LT; when LE => return LE; when EQ => return LE; when others => null; end case; end if; end if; -- Next attempt is to see if we have an entity compared with a -- compile time known value, where there is a current value -- conditional for the entity which can tell us the result. declare Var : Node_Id; -- Entity variable (left operand) Val : Uint; -- Value (right operand) Inv : Boolean; -- If False, we have reversed the operands Op : Node_Kind; -- Comparison operator kind from Get_Current_Value_Condition call Opn : Node_Id; -- Value from Get_Current_Value_Condition call Opv : Uint; -- Value of Opn Result : Compare_Result; -- Known result before inversion begin if Is_Entity_Name (L) and then Compile_Time_Known_Value (R) then Var := L; Val := Expr_Value (R); Inv := False; elsif Is_Entity_Name (R) and then Compile_Time_Known_Value (L) then Var := R; Val := Expr_Value (L); Inv := True; -- That was the last chance at finding a compile time result else return Unknown; end if; Get_Current_Value_Condition (Var, Op, Opn); -- That was the last chance, so if we got nothing return if No (Opn) then return Unknown; end if; Opv := Expr_Value (Opn); -- We got a comparison, so we might have something interesting -- Convert LE to LT and GE to GT, just so we have fewer cases if Op = N_Op_Le then Op := N_Op_Lt; Opv := Opv + 1; elsif Op = N_Op_Ge then Op := N_Op_Gt; Opv := Opv - 1; end if; -- Deal with equality case if Op = N_Op_Eq then if Val = Opv then Result := EQ; elsif Opv < Val then Result := LT; else Result := GT; end if; -- Deal with inequality case elsif Op = N_Op_Ne then if Val = Opv then Result := NE; else return Unknown; end if; -- Deal with greater than case elsif Op = N_Op_Gt then if Opv >= Val then Result := GT; elsif Opv = Val - 1 then Result := GE; else return Unknown; end if; -- Deal with less than case else pragma Assert (Op = N_Op_Lt); if Opv <= Val then Result := LT; elsif Opv = Val + 1 then Result := LE; else return Unknown; end if; end if; -- Deal with inverting result if Inv then case Result is when GT => return LT; when GE => return LE; when LT => return GT; when LE => return GE; when others => return Result; end case; end if; return Result; end; end if; end Compile_Time_Compare; ------------------------------- -- Compile_Time_Known_Bounds -- ------------------------------- function Compile_Time_Known_Bounds (T : Entity_Id) return Boolean is Indx : Node_Id; Typ : Entity_Id; begin if T = Any_Composite or else not Is_Array_Type (T) then return False; end if; Indx := First_Index (T); while Present (Indx) loop Typ := Underlying_Type (Etype (Indx)); -- Never look at junk bounds of a generic type if Is_Generic_Type (Typ) then return False; end if; -- Otherwise check bounds for compile time known if not Compile_Time_Known_Value (Type_Low_Bound (Typ)) then return False; elsif not Compile_Time_Known_Value (Type_High_Bound (Typ)) then return False; else Next_Index (Indx); end if; end loop; return True; end Compile_Time_Known_Bounds; ------------------------------ -- Compile_Time_Known_Value -- ------------------------------ function Compile_Time_Known_Value (Op : Node_Id) return Boolean is K : constant Node_Kind := Nkind (Op); CV_Ent : CV_Entry renames CV_Cache (Nat (Op) mod CV_Cache_Size); begin -- Never known at compile time if bad type or raises constraint error -- or empty (latter case occurs only as a result of a previous error). if No (Op) then Check_Error_Detected; return False; elsif Op = Error or else Etype (Op) = Any_Type or else Raises_Constraint_Error (Op) then return False; end if; -- If we have an entity name, then see if it is the name of a constant -- and if so, test the corresponding constant value, or the name of -- an enumeration literal, which is always a constant. if Present (Etype (Op)) and then Is_Entity_Name (Op) then declare E : constant Entity_Id := Entity (Op); V : Node_Id; begin -- Never known at compile time if it is a packed array value. -- We might want to try to evaluate these at compile time one -- day, but we do not make that attempt now. if Is_Packed_Array_Impl_Type (Etype (Op)) then return False; end if; if Ekind (E) = E_Enumeration_Literal then return True; elsif Ekind (E) = E_Constant then V := Constant_Value (E); return Present (V) and then Compile_Time_Known_Value (V); end if; end; -- We have a value, see if it is compile time known else -- Integer literals are worth storing in the cache if K = N_Integer_Literal then CV_Ent.N := Op; CV_Ent.V := Intval (Op); return True; -- Other literals and NULL are known at compile time elsif Nkind_In (K, N_Character_Literal, N_Real_Literal, N_String_Literal, N_Null) then return True; end if; end if; -- If we fall through, not known at compile time return False; -- If we get an exception while trying to do this test, then some error -- has occurred, and we simply say that the value is not known after all exception when others => return False; end Compile_Time_Known_Value; -------------------------------------- -- Compile_Time_Known_Value_Or_Aggr -- -------------------------------------- function Compile_Time_Known_Value_Or_Aggr (Op : Node_Id) return Boolean is begin -- If we have an entity name, then see if it is the name of a constant -- and if so, test the corresponding constant value, or the name of -- an enumeration literal, which is always a constant. if Is_Entity_Name (Op) then declare E : constant Entity_Id := Entity (Op); V : Node_Id; begin if Ekind (E) = E_Enumeration_Literal then return True; elsif Ekind (E) /= E_Constant then return False; else V := Constant_Value (E); return Present (V) and then Compile_Time_Known_Value_Or_Aggr (V); end if; end; -- We have a value, see if it is compile time known else if Compile_Time_Known_Value (Op) then return True; elsif Nkind (Op) = N_Aggregate then if Present (Expressions (Op)) then declare Expr : Node_Id; begin Expr := First (Expressions (Op)); while Present (Expr) loop if not Compile_Time_Known_Value_Or_Aggr (Expr) then return False; else Next (Expr); end if; end loop; end; end if; if Present (Component_Associations (Op)) then declare Cass : Node_Id; begin Cass := First (Component_Associations (Op)); while Present (Cass) loop if not Compile_Time_Known_Value_Or_Aggr (Expression (Cass)) then return False; end if; Next (Cass); end loop; end; end if; return True; elsif Nkind (Op) = N_Qualified_Expression then return Compile_Time_Known_Value_Or_Aggr (Expression (Op)); -- All other types of values are not known at compile time else return False; end if; end if; end Compile_Time_Known_Value_Or_Aggr; --------------------------------------- -- CRT_Safe_Compile_Time_Known_Value -- --------------------------------------- function CRT_Safe_Compile_Time_Known_Value (Op : Node_Id) return Boolean is begin if (Configurable_Run_Time_Mode or No_Run_Time_Mode) and then not Is_OK_Static_Expression (Op) then return False; else return Compile_Time_Known_Value (Op); end if; end CRT_Safe_Compile_Time_Known_Value; ----------------- -- Eval_Actual -- ----------------- -- This is only called for actuals of functions that are not predefined -- operators (which have already been rewritten as operators at this -- stage), so the call can never be folded, and all that needs doing for -- the actual is to do the check for a non-static context. procedure Eval_Actual (N : Node_Id) is begin Check_Non_Static_Context (N); end Eval_Actual; -------------------- -- Eval_Allocator -- -------------------- -- Allocators are never static, so all we have to do is to do the -- check for a non-static context if an expression is present. procedure Eval_Allocator (N : Node_Id) is Expr : constant Node_Id := Expression (N); begin if Nkind (Expr) = N_Qualified_Expression then Check_Non_Static_Context (Expression (Expr)); end if; end Eval_Allocator; ------------------------ -- Eval_Arithmetic_Op -- ------------------------ -- Arithmetic operations are static functions, so the result is static -- if both operands are static (RM 4.9(7), 4.9(20)). procedure Eval_Arithmetic_Op (N : Node_Id) is Left : constant Node_Id := Left_Opnd (N); Right : constant Node_Id := Right_Opnd (N); Ltype : constant Entity_Id := Etype (Left); Rtype : constant Entity_Id := Etype (Right); Otype : Entity_Id := Empty; Stat : Boolean; Fold : Boolean; begin -- If not foldable we are done Test_Expression_Is_Foldable (N, Left, Right, Stat, Fold); if not Fold then return; end if; -- Otherwise attempt to fold if Is_Universal_Numeric_Type (Etype (Left)) and then Is_Universal_Numeric_Type (Etype (Right)) then Otype := Find_Universal_Operator_Type (N); end if; -- Fold for cases where both operands are of integer type if Is_Integer_Type (Ltype) and then Is_Integer_Type (Rtype) then declare Left_Int : constant Uint := Expr_Value (Left); Right_Int : constant Uint := Expr_Value (Right); Result : Uint; begin case Nkind (N) is when N_Op_Add => Result := Left_Int + Right_Int; when N_Op_Subtract => Result := Left_Int - Right_Int; when N_Op_Multiply => if OK_Bits (N, UI_From_Int (Num_Bits (Left_Int) + Num_Bits (Right_Int))) then Result := Left_Int * Right_Int; else Result := Left_Int; end if; when N_Op_Divide => -- The exception Constraint_Error is raised by integer -- division, rem and mod if the right operand is zero. if Right_Int = 0 then -- When SPARK_Mode is On, force a warning instead of -- an error in that case, as this likely corresponds -- to deactivated code. Apply_Compile_Time_Constraint_Error (N, "division by zero", CE_Divide_By_Zero, Warn => not Stat or SPARK_Mode = On); Set_Raises_Constraint_Error (N); return; -- Otherwise we can do the division else Result := Left_Int / Right_Int; end if; when N_Op_Mod => -- The exception Constraint_Error is raised by integer -- division, rem and mod if the right operand is zero. if Right_Int = 0 then -- When SPARK_Mode is On, force a warning instead of -- an error in that case, as this likely corresponds -- to deactivated code. Apply_Compile_Time_Constraint_Error (N, "mod with zero divisor", CE_Divide_By_Zero, Warn => not Stat or SPARK_Mode = On); return; else Result := Left_Int mod Right_Int; end if; when N_Op_Rem => -- The exception Constraint_Error is raised by integer -- division, rem and mod if the right operand is zero. if Right_Int = 0 then -- When SPARK_Mode is On, force a warning instead of -- an error in that case, as this likely corresponds -- to deactivated code. Apply_Compile_Time_Constraint_Error (N, "rem with zero divisor", CE_Divide_By_Zero, Warn => not Stat or SPARK_Mode = On); return; else Result := Left_Int rem Right_Int; end if; when others => raise Program_Error; end case; -- Adjust the result by the modulus if the type is a modular type if Is_Modular_Integer_Type (Ltype) then Result := Result mod Modulus (Ltype); -- For a signed integer type, check non-static overflow elsif (not Stat) and then Is_Signed_Integer_Type (Ltype) then declare BT : constant Entity_Id := Base_Type (Ltype); Lo : constant Uint := Expr_Value (Type_Low_Bound (BT)); Hi : constant Uint := Expr_Value (Type_High_Bound (BT)); begin if Result < Lo or else Result > Hi then Apply_Compile_Time_Constraint_Error (N, "value not in range of }??", CE_Overflow_Check_Failed, Ent => BT); return; end if; end; end if; -- If we get here we can fold the result Fold_Uint (N, Result, Stat); end; -- Cases where at least one operand is a real. We handle the cases of -- both reals, or mixed/real integer cases (the latter happen only for -- divide and multiply, and the result is always real). elsif Is_Real_Type (Ltype) or else Is_Real_Type (Rtype) then declare Left_Real : Ureal; Right_Real : Ureal; Result : Ureal; begin if Is_Real_Type (Ltype) then Left_Real := Expr_Value_R (Left); else Left_Real := UR_From_Uint (Expr_Value (Left)); end if; if Is_Real_Type (Rtype) then Right_Real := Expr_Value_R (Right); else Right_Real := UR_From_Uint (Expr_Value (Right)); end if; if Nkind (N) = N_Op_Add then Result := Left_Real + Right_Real; elsif Nkind (N) = N_Op_Subtract then Result := Left_Real - Right_Real; elsif Nkind (N) = N_Op_Multiply then Result := Left_Real * Right_Real; else pragma Assert (Nkind (N) = N_Op_Divide); if UR_Is_Zero (Right_Real) then Apply_Compile_Time_Constraint_Error (N, "division by zero", CE_Divide_By_Zero); return; end if; Result := Left_Real / Right_Real; end if; Fold_Ureal (N, Result, Stat); end; end if; -- If the operator was resolved to a specific type, make sure that type -- is frozen even if the expression is folded into a literal (which has -- a universal type). if Present (Otype) then Freeze_Before (N, Otype); end if; end Eval_Arithmetic_Op; ---------------------------- -- Eval_Character_Literal -- ---------------------------- -- Nothing to be done procedure Eval_Character_Literal (N : Node_Id) is pragma Warnings (Off, N); begin null; end Eval_Character_Literal; --------------- -- Eval_Call -- --------------- -- Static function calls are either calls to predefined operators -- with static arguments, or calls to functions that rename a literal. -- Only the latter case is handled here, predefined operators are -- constant-folded elsewhere. -- If the function is itself inherited (see 7423-001) the literal of -- the parent type must be explicitly converted to the return type -- of the function. procedure Eval_Call (N : Node_Id) is Loc : constant Source_Ptr := Sloc (N); Typ : constant Entity_Id := Etype (N); Lit : Entity_Id; begin if Nkind (N) = N_Function_Call and then No (Parameter_Associations (N)) and then Is_Entity_Name (Name (N)) and then Present (Alias (Entity (Name (N)))) and then Is_Enumeration_Type (Base_Type (Typ)) then Lit := Ultimate_Alias (Entity (Name (N))); if Ekind (Lit) = E_Enumeration_Literal then if Base_Type (Etype (Lit)) /= Base_Type (Typ) then Rewrite (N, Convert_To (Typ, New_Occurrence_Of (Lit, Loc))); else Rewrite (N, New_Occurrence_Of (Lit, Loc)); end if; Resolve (N, Typ); end if; end if; end Eval_Call; -------------------------- -- Eval_Case_Expression -- -------------------------- -- A conditional expression is static if all its conditions and dependent -- expressions are static. Note that we do not care if the dependent -- expressions raise CE, except for the one that will be selected. procedure Eval_Case_Expression (N : Node_Id) is Alt : Node_Id; Choice : Node_Id; begin Set_Is_Static_Expression (N, False); if Error_Posted (Expression (N)) or else not Is_Static_Expression (Expression (N)) then Check_Non_Static_Context (Expression (N)); return; end if; -- First loop, make sure all the alternatives are static expressions -- none of which raise Constraint_Error. We make the constraint error -- check because part of the legality condition for a correct static -- case expression is that the cases are covered, like any other case -- expression. And we can't do that if any of the conditions raise an -- exception, so we don't even try to evaluate if that is the case. Alt := First (Alternatives (N)); while Present (Alt) loop -- The expression must be static, but we don't care at this stage -- if it raises Constraint_Error (the alternative might not match, -- in which case the expression is statically unevaluated anyway). if not Is_Static_Expression (Expression (Alt)) then Check_Non_Static_Context (Expression (Alt)); return; end if; -- The choices of a case always have to be static, and cannot raise -- an exception. If this condition is not met, then the expression -- is plain illegal, so just abandon evaluation attempts. No need -- to check non-static context when we have something illegal anyway. if not Is_OK_Static_Choice_List (Discrete_Choices (Alt)) then return; end if; Next (Alt); end loop; -- OK, if the above loop gets through it means that all choices are OK -- static (don't raise exceptions), so the whole case is static, and we -- can find the matching alternative. Set_Is_Static_Expression (N); -- Now to deal with propagating a possible constraint error -- If the selecting expression raises CE, propagate and we are done if Raises_Constraint_Error (Expression (N)) then Set_Raises_Constraint_Error (N); -- Otherwise we need to check the alternatives to find the matching -- one. CE's in other than the matching one are not relevant. But we -- do need to check the matching one. Unlike the first loop, we do not -- have to go all the way through, when we find the matching one, quit. else Alt := First (Alternatives (N)); Search : loop -- We must find a match among the alternatives. If not, this must -- be due to other errors, so just ignore, leaving as non-static. if No (Alt) then Set_Is_Static_Expression (N, False); return; end if; -- Otherwise loop through choices of this alternative Choice := First (Discrete_Choices (Alt)); while Present (Choice) loop -- If we find a matching choice, then the Expression of this -- alternative replaces N (Raises_Constraint_Error flag is -- included, so we don't have to special case that). if Choice_Matches (Expression (N), Choice) = Match then Rewrite (N, Relocate_Node (Expression (Alt))); return; end if; Next (Choice); end loop; Next (Alt); end loop Search; end if; end Eval_Case_Expression; ------------------------ -- Eval_Concatenation -- ------------------------ -- Concatenation is a static function, so the result is static if both -- operands are static (RM 4.9(7), 4.9(21)). procedure Eval_Concatenation (N : Node_Id) is Left : constant Node_Id := Left_Opnd (N); Right : constant Node_Id := Right_Opnd (N); C_Typ : constant Entity_Id := Root_Type (Component_Type (Etype (N))); Stat : Boolean; Fold : Boolean; begin -- Concatenation is never static in Ada 83, so if Ada 83 check operand -- non-static context. if Ada_Version = Ada_83 and then Comes_From_Source (N) then Check_Non_Static_Context (Left); Check_Non_Static_Context (Right); return; end if; -- If not foldable we are done. In principle concatenation that yields -- any string type is static (i.e. an array type of character types). -- However, character types can include enumeration literals, and -- concatenation in that case cannot be described by a literal, so we -- only consider the operation static if the result is an array of -- (a descendant of) a predefined character type. Test_Expression_Is_Foldable (N, Left, Right, Stat, Fold); if not (Is_Standard_Character_Type (C_Typ) and then Fold) then Set_Is_Static_Expression (N, False); return; end if; -- Compile time string concatenation -- ??? Note that operands that are aggregates can be marked as static, -- so we should attempt at a later stage to fold concatenations with -- such aggregates. declare Left_Str : constant Node_Id := Get_String_Val (Left); Left_Len : Nat; Right_Str : constant Node_Id := Get_String_Val (Right); Folded_Val : String_Id := No_String; begin -- Establish new string literal, and store left operand. We make -- sure to use the special Start_String that takes an operand if -- the left operand is a string literal. Since this is optimized -- in the case where that is the most recently created string -- literal, we ensure efficient time/space behavior for the -- case of a concatenation of a series of string literals. if Nkind (Left_Str) = N_String_Literal then Left_Len := String_Length (Strval (Left_Str)); -- If the left operand is the empty string, and the right operand -- is a string literal (the case of "" & "..."), the result is the -- value of the right operand. This optimization is important when -- Is_Folded_In_Parser, to avoid copying an enormous right -- operand. if Left_Len = 0 and then Nkind (Right_Str) = N_String_Literal then Folded_Val := Strval (Right_Str); else Start_String (Strval (Left_Str)); end if; else Start_String; Store_String_Char (UI_To_CC (Char_Literal_Value (Left_Str))); Left_Len := 1; end if; -- Now append the characters of the right operand, unless we -- optimized the "" & "..." case above. if Nkind (Right_Str) = N_String_Literal then if Left_Len /= 0 then Store_String_Chars (Strval (Right_Str)); Folded_Val := End_String; end if; else Store_String_Char (UI_To_CC (Char_Literal_Value (Right_Str))); Folded_Val := End_String; end if; Set_Is_Static_Expression (N, Stat); -- If left operand is the empty string, the result is the -- right operand, including its bounds if anomalous. if Left_Len = 0 and then Is_Array_Type (Etype (Right)) and then Etype (Right) /= Any_String then Set_Etype (N, Etype (Right)); end if; Fold_Str (N, Folded_Val, Static => Stat); end; end Eval_Concatenation; ---------------------- -- Eval_Entity_Name -- ---------------------- -- This procedure is used for identifiers and expanded names other than -- named numbers (see Eval_Named_Integer, Eval_Named_Real. These are -- static if they denote a static constant (RM 4.9(6)) or if the name -- denotes an enumeration literal (RM 4.9(22)). procedure Eval_Entity_Name (N : Node_Id) is Def_Id : constant Entity_Id := Entity (N); Val : Node_Id; begin -- Enumeration literals are always considered to be constants -- and cannot raise constraint error (RM 4.9(22)). if Ekind (Def_Id) = E_Enumeration_Literal then Set_Is_Static_Expression (N); return; -- A name is static if it denotes a static constant (RM 4.9(5)), and -- we also copy Raise_Constraint_Error. Notice that even if non-static, -- it does not violate 10.2.1(8) here, since this is not a variable. elsif Ekind (Def_Id) = E_Constant then -- Deferred constants must always be treated as nonstatic outside the -- scope of their full view. if Present (Full_View (Def_Id)) and then not In_Open_Scopes (Scope (Def_Id)) then Val := Empty; else Val := Constant_Value (Def_Id); end if; if Present (Val) then Set_Is_Static_Expression (N, Is_Static_Expression (Val) and then Is_Static_Subtype (Etype (Def_Id))); Set_Raises_Constraint_Error (N, Raises_Constraint_Error (Val)); if not Is_Static_Expression (N) and then not Is_Generic_Type (Etype (N)) then Validate_Static_Object_Name (N); end if; -- Mark constant condition in SCOs if Generate_SCO and then Comes_From_Source (N) and then Is_Boolean_Type (Etype (Def_Id)) and then Compile_Time_Known_Value (N) then Set_SCO_Condition (N, Expr_Value_E (N) = Standard_True); end if; return; end if; end if; -- Fall through if the name is not static Validate_Static_Object_Name (N); end Eval_Entity_Name; ------------------------ -- Eval_If_Expression -- ------------------------ -- We can fold to a static expression if the condition and both dependent -- expressions are static. Otherwise, the only required processing is to do -- the check for non-static context for the then and else expressions. procedure Eval_If_Expression (N : Node_Id) is Condition : constant Node_Id := First (Expressions (N)); Then_Expr : constant Node_Id := Next (Condition); Else_Expr : constant Node_Id := Next (Then_Expr); Result : Node_Id; Non_Result : Node_Id; Rstat : constant Boolean := Is_Static_Expression (Condition) and then Is_Static_Expression (Then_Expr) and then Is_Static_Expression (Else_Expr); -- True if result is static begin -- If result not static, nothing to do, otherwise set static result if not Rstat then return; else Set_Is_Static_Expression (N); end if; -- If any operand is Any_Type, just propagate to result and do not try -- to fold, this prevents cascaded errors. if Etype (Condition) = Any_Type or else Etype (Then_Expr) = Any_Type or else Etype (Else_Expr) = Any_Type then Set_Etype (N, Any_Type); Set_Is_Static_Expression (N, False); return; end if; -- If condition raises constraint error then we have already signaled -- an error, and we just propagate to the result and do not fold. if Raises_Constraint_Error (Condition) then Set_Raises_Constraint_Error (N); return; end if; -- Static case where we can fold. Note that we don't try to fold cases -- where the condition is known at compile time, but the result is -- non-static. This avoids possible cases of infinite recursion where -- the expander puts in a redundant test and we remove it. Instead we -- deal with these cases in the expander. -- Select result operand if Is_True (Expr_Value (Condition)) then Result := Then_Expr; Non_Result := Else_Expr; else Result := Else_Expr; Non_Result := Then_Expr; end if; -- Note that it does not matter if the non-result operand raises a -- Constraint_Error, but if the result raises constraint error then we -- replace the node with a raise constraint error. This will properly -- propagate Raises_Constraint_Error since this flag is set in Result. if Raises_Constraint_Error (Result) then Rewrite_In_Raise_CE (N, Result); Check_Non_Static_Context (Non_Result); -- Otherwise the result operand replaces the original node else Rewrite (N, Relocate_Node (Result)); Set_Is_Static_Expression (N); end if; end Eval_If_Expression; ---------------------------- -- Eval_Indexed_Component -- ---------------------------- -- Indexed components are never static, so we need to perform the check -- for non-static context on the index values. Then, we check if the -- value can be obtained at compile time, even though it is non-static. procedure Eval_Indexed_Component (N : Node_Id) is Expr : Node_Id; begin -- Check for non-static context on index values Expr := First (Expressions (N)); while Present (Expr) loop Check_Non_Static_Context (Expr); Next (Expr); end loop; -- If the indexed component appears in an object renaming declaration -- then we do not want to try to evaluate it, since in this case we -- need the identity of the array element. if Nkind (Parent (N)) = N_Object_Renaming_Declaration then return; -- Similarly if the indexed component appears as the prefix of an -- attribute we don't want to evaluate it, because at least for -- some cases of attributes we need the identify (e.g. Access, Size) elsif Nkind (Parent (N)) = N_Attribute_Reference then return; end if; -- Note: there are other cases, such as the left side of an assignment, -- or an OUT parameter for a call, where the replacement results in the -- illegal use of a constant, But these cases are illegal in the first -- place, so the replacement, though silly, is harmless. -- Now see if this is a constant array reference if List_Length (Expressions (N)) = 1 and then Is_Entity_Name (Prefix (N)) and then Ekind (Entity (Prefix (N))) = E_Constant and then Present (Constant_Value (Entity (Prefix (N)))) then declare Loc : constant Source_Ptr := Sloc (N); Arr : constant Node_Id := Constant_Value (Entity (Prefix (N))); Sub : constant Node_Id := First (Expressions (N)); Atyp : Entity_Id; -- Type of array Lin : Nat; -- Linear one's origin subscript value for array reference Lbd : Node_Id; -- Lower bound of the first array index Elm : Node_Id; -- Value from constant array begin Atyp := Etype (Arr); if Is_Access_Type (Atyp) then Atyp := Designated_Type (Atyp); end if; -- If we have an array type (we should have but perhaps there are -- error cases where this is not the case), then see if we can do -- a constant evaluation of the array reference. if Is_Array_Type (Atyp) and then Atyp /= Any_Composite then if Ekind (Atyp) = E_String_Literal_Subtype then Lbd := String_Literal_Low_Bound (Atyp); else Lbd := Type_Low_Bound (Etype (First_Index (Atyp))); end if; if Compile_Time_Known_Value (Sub) and then Nkind (Arr) = N_Aggregate and then Compile_Time_Known_Value (Lbd) and then Is_Discrete_Type (Component_Type (Atyp)) then Lin := UI_To_Int (Expr_Value (Sub) - Expr_Value (Lbd)) + 1; if List_Length (Expressions (Arr)) >= Lin then Elm := Pick (Expressions (Arr), Lin); -- If the resulting expression is compile time known, -- then we can rewrite the indexed component with this -- value, being sure to mark the result as non-static. -- We also reset the Sloc, in case this generates an -- error later on (e.g. 136'Access). if Compile_Time_Known_Value (Elm) then Rewrite (N, Duplicate_Subexpr_No_Checks (Elm)); Set_Is_Static_Expression (N, False); Set_Sloc (N, Loc); end if; end if; -- We can also constant-fold if the prefix is a string literal. -- This will be useful in an instantiation or an inlining. elsif Compile_Time_Known_Value (Sub) and then Nkind (Arr) = N_String_Literal and then Compile_Time_Known_Value (Lbd) and then Expr_Value (Lbd) = 1 and then Expr_Value (Sub) <= String_Literal_Length (Etype (Arr)) then declare C : constant Char_Code := Get_String_Char (Strval (Arr), UI_To_Int (Expr_Value (Sub))); begin Set_Character_Literal_Name (C); Elm := Make_Character_Literal (Loc, Chars => Name_Find, Char_Literal_Value => UI_From_CC (C)); Set_Etype (Elm, Component_Type (Atyp)); Rewrite (N, Duplicate_Subexpr_No_Checks (Elm)); Set_Is_Static_Expression (N, False); end; end if; end if; end; end if; end Eval_Indexed_Component; -------------------------- -- Eval_Integer_Literal -- -------------------------- -- Numeric literals are static (RM 4.9(1)), and have already been marked -- as static by the analyzer. The reason we did it that early is to allow -- the possibility of turning off the Is_Static_Expression flag after -- analysis, but before resolution, when integer literals are generated in -- the expander that do not correspond to static expressions. procedure Eval_Integer_Literal (N : Node_Id) is T : constant Entity_Id := Etype (N); function In_Any_Integer_Context return Boolean; -- If the literal is resolved with a specific type in a context where -- the expected type is Any_Integer, there are no range checks on the -- literal. By the time the literal is evaluated, it carries the type -- imposed by the enclosing expression, and we must recover the context -- to determine that Any_Integer is meant. ---------------------------- -- In_Any_Integer_Context -- ---------------------------- function In_Any_Integer_Context return Boolean is Par : constant Node_Id := Parent (N); K : constant Node_Kind := Nkind (Par); begin -- Any_Integer also appears in digits specifications for real types, -- but those have bounds smaller that those of any integer base type, -- so we can safely ignore these cases. return Nkind_In (K, N_Number_Declaration, N_Attribute_Reference, N_Attribute_Definition_Clause, N_Modular_Type_Definition, N_Signed_Integer_Type_Definition); end In_Any_Integer_Context; -- Start of processing for Eval_Integer_Literal begin -- If the literal appears in a non-expression context, then it is -- certainly appearing in a non-static context, so check it. This is -- actually a redundant check, since Check_Non_Static_Context would -- check it, but it seems worthwhile to optimize out the call. -- An exception is made for a literal in an if or case expression if (Nkind_In (Parent (N), N_If_Expression, N_Case_Expression_Alternative) or else Nkind (Parent (N)) not in N_Subexpr) and then not In_Any_Integer_Context then Check_Non_Static_Context (N); end if; -- Modular integer literals must be in their base range if Is_Modular_Integer_Type (T) and then Is_Out_Of_Range (N, Base_Type (T), Assume_Valid => True) then Out_Of_Range (N); end if; end Eval_Integer_Literal; --------------------- -- Eval_Logical_Op -- --------------------- -- Logical operations are static functions, so the result is potentially -- static if both operands are potentially static (RM 4.9(7), 4.9(20)). procedure Eval_Logical_Op (N : Node_Id) is Left : constant Node_Id := Left_Opnd (N); Right : constant Node_Id := Right_Opnd (N); Stat : Boolean; Fold : Boolean; begin -- If not foldable we are done Test_Expression_Is_Foldable (N, Left, Right, Stat, Fold); if not Fold then return; end if; -- Compile time evaluation of logical operation declare Left_Int : constant Uint := Expr_Value (Left); Right_Int : constant Uint := Expr_Value (Right); begin if Is_Modular_Integer_Type (Etype (N)) then declare Left_Bits : Bits (0 .. UI_To_Int (Esize (Etype (N))) - 1); Right_Bits : Bits (0 .. UI_To_Int (Esize (Etype (N))) - 1); begin To_Bits (Left_Int, Left_Bits); To_Bits (Right_Int, Right_Bits); -- Note: should really be able to use array ops instead of -- these loops, but they weren't working at the time ??? if Nkind (N) = N_Op_And then for J in Left_Bits'Range loop Left_Bits (J) := Left_Bits (J) and Right_Bits (J); end loop; elsif Nkind (N) = N_Op_Or then for J in Left_Bits'Range loop Left_Bits (J) := Left_Bits (J) or Right_Bits (J); end loop; else pragma Assert (Nkind (N) = N_Op_Xor); for J in Left_Bits'Range loop Left_Bits (J) := Left_Bits (J) xor Right_Bits (J); end loop; end if; Fold_Uint (N, From_Bits (Left_Bits, Etype (N)), Stat); end; else pragma Assert (Is_Boolean_Type (Etype (N))); if Nkind (N) = N_Op_And then Fold_Uint (N, Test (Is_True (Left_Int) and then Is_True (Right_Int)), Stat); elsif Nkind (N) = N_Op_Or then Fold_Uint (N, Test (Is_True (Left_Int) or else Is_True (Right_Int)), Stat); else pragma Assert (Nkind (N) = N_Op_Xor); Fold_Uint (N, Test (Is_True (Left_Int) xor Is_True (Right_Int)), Stat); end if; end if; end; end Eval_Logical_Op; ------------------------ -- Eval_Membership_Op -- ------------------------ -- A membership test is potentially static if the expression is static, and -- the range is a potentially static range, or is a subtype mark denoting a -- static subtype (RM 4.9(12)). procedure Eval_Membership_Op (N : Node_Id) is Alts : constant List_Id := Alternatives (N); Choice : constant Node_Id := Right_Opnd (N); Expr : constant Node_Id := Left_Opnd (N); Result : Match_Result; begin -- Ignore if error in either operand, except to make sure that Any_Type -- is properly propagated to avoid junk cascaded errors. if Etype (Expr) = Any_Type or else (Present (Choice) and then Etype (Choice) = Any_Type) then Set_Etype (N, Any_Type); return; end if; -- If left operand non-static, then nothing to do if not Is_Static_Expression (Expr) then return; end if; -- If choice is non-static, left operand is in non-static context if (Present (Choice) and then not Is_Static_Choice (Choice)) or else (Present (Alts) and then not Is_Static_Choice_List (Alts)) then Check_Non_Static_Context (Expr); return; end if; -- Otherwise we definitely have a static expression Set_Is_Static_Expression (N); -- If left operand raises constraint error, propagate and we are done if Raises_Constraint_Error (Expr) then Set_Raises_Constraint_Error (N, True); -- See if we match else if Present (Choice) then Result := Choice_Matches (Expr, Choice); else Result := Choices_Match (Expr, Alts); end if; -- If result is Non_Static, it means that we raise Constraint_Error, -- since we already tested that the operands were themselves static. if Result = Non_Static then Set_Raises_Constraint_Error (N); -- Otherwise we have our result (flipped if NOT IN case) else Fold_Uint (N, Test ((Result = Match) xor (Nkind (N) = N_Not_In)), True); Warn_On_Known_Condition (N); end if; end if; end Eval_Membership_Op; ------------------------ -- Eval_Named_Integer -- ------------------------ procedure Eval_Named_Integer (N : Node_Id) is begin Fold_Uint (N, Expr_Value (Expression (Declaration_Node (Entity (N)))), True); end Eval_Named_Integer; --------------------- -- Eval_Named_Real -- --------------------- procedure Eval_Named_Real (N : Node_Id) is begin Fold_Ureal (N, Expr_Value_R (Expression (Declaration_Node (Entity (N)))), True); end Eval_Named_Real; ------------------- -- Eval_Op_Expon -- ------------------- -- Exponentiation is a static functions, so the result is potentially -- static if both operands are potentially static (RM 4.9(7), 4.9(20)). procedure Eval_Op_Expon (N : Node_Id) is Left : constant Node_Id := Left_Opnd (N); Right : constant Node_Id := Right_Opnd (N); Stat : Boolean; Fold : Boolean; begin -- If not foldable we are done Test_Expression_Is_Foldable (N, Left, Right, Stat, Fold, CRT_Safe => True); -- Return if not foldable if not Fold then return; end if; if Configurable_Run_Time_Mode and not Stat then return; end if; -- Fold exponentiation operation declare Right_Int : constant Uint := Expr_Value (Right); begin -- Integer case if Is_Integer_Type (Etype (Left)) then declare Left_Int : constant Uint := Expr_Value (Left); Result : Uint; begin -- Exponentiation of an integer raises Constraint_Error for a -- negative exponent (RM 4.5.6). if Right_Int < 0 then Apply_Compile_Time_Constraint_Error (N, "integer exponent negative", CE_Range_Check_Failed, Warn => not Stat); return; else if OK_Bits (N, Num_Bits (Left_Int) * Right_Int) then Result := Left_Int ** Right_Int; else Result := Left_Int; end if; if Is_Modular_Integer_Type (Etype (N)) then Result := Result mod Modulus (Etype (N)); end if; Fold_Uint (N, Result, Stat); end if; end; -- Real case else declare Left_Real : constant Ureal := Expr_Value_R (Left); begin -- Cannot have a zero base with a negative exponent if UR_Is_Zero (Left_Real) then if Right_Int < 0 then Apply_Compile_Time_Constraint_Error (N, "zero ** negative integer", CE_Range_Check_Failed, Warn => not Stat); return; else Fold_Ureal (N, Ureal_0, Stat); end if; else Fold_Ureal (N, Left_Real ** Right_Int, Stat); end if; end; end if; end; end Eval_Op_Expon; ----------------- -- Eval_Op_Not -- ----------------- -- The not operation is a static functions, so the result is potentially -- static if the operand is potentially static (RM 4.9(7), 4.9(20)). procedure Eval_Op_Not (N : Node_Id) is Right : constant Node_Id := Right_Opnd (N); Stat : Boolean; Fold : Boolean; begin -- If not foldable we are done Test_Expression_Is_Foldable (N, Right, Stat, Fold); if not Fold then return; end if; -- Fold not operation declare Rint : constant Uint := Expr_Value (Right); Typ : constant Entity_Id := Etype (N); begin -- Negation is equivalent to subtracting from the modulus minus one. -- For a binary modulus this is equivalent to the ones-complement of -- the original value. For a nonbinary modulus this is an arbitrary -- but consistent definition. if Is_Modular_Integer_Type (Typ) then Fold_Uint (N, Modulus (Typ) - 1 - Rint, Stat); else pragma Assert (Is_Boolean_Type (Typ)); Fold_Uint (N, Test (not Is_True (Rint)), Stat); end if; Set_Is_Static_Expression (N, Stat); end; end Eval_Op_Not; ------------------------------- -- Eval_Qualified_Expression -- ------------------------------- -- A qualified expression is potentially static if its subtype mark denotes -- a static subtype and its expression is potentially static (RM 4.9 (11)). procedure Eval_Qualified_Expression (N : Node_Id) is Operand : constant Node_Id := Expression (N); Target_Type : constant Entity_Id := Entity (Subtype_Mark (N)); Stat : Boolean; Fold : Boolean; Hex : Boolean; begin -- Can only fold if target is string or scalar and subtype is static. -- Also, do not fold if our parent is an allocator (this is because the -- qualified expression is really part of the syntactic structure of an -- allocator, and we do not want to end up with something that -- corresponds to "new 1" where the 1 is the result of folding a -- qualified expression). if not Is_Static_Subtype (Target_Type) or else Nkind (Parent (N)) = N_Allocator then Check_Non_Static_Context (Operand); -- If operand is known to raise constraint_error, set the flag on the -- expression so it does not get optimized away. if Nkind (Operand) = N_Raise_Constraint_Error then Set_Raises_Constraint_Error (N); end if; return; end if; -- If not foldable we are done Test_Expression_Is_Foldable (N, Operand, Stat, Fold); if not Fold then return; -- Don't try fold if target type has constraint error bounds elsif not Is_OK_Static_Subtype (Target_Type) then Set_Raises_Constraint_Error (N); return; end if; -- Here we will fold, save Print_In_Hex indication Hex := Nkind (Operand) = N_Integer_Literal and then Print_In_Hex (Operand); -- Fold the result of qualification if Is_Discrete_Type (Target_Type) then Fold_Uint (N, Expr_Value (Operand), Stat); -- Preserve Print_In_Hex indication if Hex and then Nkind (N) = N_Integer_Literal then Set_Print_In_Hex (N); end if; elsif Is_Real_Type (Target_Type) then Fold_Ureal (N, Expr_Value_R (Operand), Stat); else Fold_Str (N, Strval (Get_String_Val (Operand)), Stat); if not Stat then Set_Is_Static_Expression (N, False); else Check_String_Literal_Length (N, Target_Type); end if; return; end if; -- The expression may be foldable but not static Set_Is_Static_Expression (N, Stat); if Is_Out_Of_Range (N, Etype (N), Assume_Valid => True) then Out_Of_Range (N); end if; end Eval_Qualified_Expression; ----------------------- -- Eval_Real_Literal -- ----------------------- -- Numeric literals are static (RM 4.9(1)), and have already been marked -- as static by the analyzer. The reason we did it that early is to allow -- the possibility of turning off the Is_Static_Expression flag after -- analysis, but before resolution, when integer literals are generated -- in the expander that do not correspond to static expressions. procedure Eval_Real_Literal (N : Node_Id) is PK : constant Node_Kind := Nkind (Parent (N)); begin -- If the literal appears in a non-expression context and not as part of -- a number declaration, then it is appearing in a non-static context, -- so check it. if PK not in N_Subexpr and then PK /= N_Number_Declaration then Check_Non_Static_Context (N); end if; end Eval_Real_Literal; ------------------------ -- Eval_Relational_Op -- ------------------------ -- Relational operations are static functions, so the result is static if -- both operands are static (RM 4.9(7), 4.9(20)), except that for strings, -- the result is never static, even if the operands are. -- However, for internally generated nodes, we allow string equality and -- inequality to be static. This is because we rewrite A in "ABC" as an -- equality test A = "ABC", and the former is definitely static. procedure Eval_Relational_Op (N : Node_Id) is Left : constant Node_Id := Left_Opnd (N); Right : constant Node_Id := Right_Opnd (N); procedure Decompose_Expr (Expr : Node_Id; Ent : out Entity_Id; Kind : out Character; Cons : out Uint; Orig : Boolean := True); -- Given expression Expr, see if it is of the form X [+/- K]. If so, Ent -- is set to the entity in X, Kind is 'F','L','E' for 'First or 'Last or -- simple entity, and Cons is the value of K. If the expression is not -- of the required form, Ent is set to Empty. -- -- Orig indicates whether Expr is the original expression to consider, -- or if we are handling a subexpression (e.g. recursive call to -- Decompose_Expr). procedure Fold_General_Op (Is_Static : Boolean); -- Attempt to fold arbitrary relational operator N. Flag Is_Static must -- be set when the operator denotes a static expression. procedure Fold_Static_Real_Op; -- Attempt to fold static real type relational operator N function Static_Length (Expr : Node_Id) return Uint; -- If Expr is an expression for a constrained array whose length is -- known at compile time, return the non-negative length, otherwise -- return -1. -------------------- -- Decompose_Expr -- -------------------- procedure Decompose_Expr (Expr : Node_Id; Ent : out Entity_Id; Kind : out Character; Cons : out Uint; Orig : Boolean := True) is Exp : Node_Id; begin -- Assume that the expression does not meet the expected form Cons := No_Uint; Ent := Empty; Kind := '?'; if Nkind (Expr) = N_Op_Add and then Compile_Time_Known_Value (Right_Opnd (Expr)) then Exp := Left_Opnd (Expr); Cons := Expr_Value (Right_Opnd (Expr)); elsif Nkind (Expr) = N_Op_Subtract and then Compile_Time_Known_Value (Right_Opnd (Expr)) then Exp := Left_Opnd (Expr); Cons := -Expr_Value (Right_Opnd (Expr)); -- If the bound is a constant created to remove side effects, recover -- the original expression to see if it has one of the recognizable -- forms. elsif Nkind (Expr) = N_Identifier and then not Comes_From_Source (Entity (Expr)) and then Ekind (Entity (Expr)) = E_Constant and then Nkind (Parent (Entity (Expr))) = N_Object_Declaration then Exp := Expression (Parent (Entity (Expr))); Decompose_Expr (Exp, Ent, Kind, Cons, Orig => False); -- If original expression includes an entity, create a reference -- to it for use below. if Present (Ent) then Exp := New_Occurrence_Of (Ent, Sloc (Ent)); else return; end if; else -- Only consider the case of X + 0 for a full expression, and -- not when recursing, otherwise we may end up with evaluating -- expressions not known at compile time to 0. if Orig then Exp := Expr; Cons := Uint_0; else return; end if; end if; -- At this stage Exp is set to the potential X if Nkind (Exp) = N_Attribute_Reference then if Attribute_Name (Exp) = Name_First then Kind := 'F'; elsif Attribute_Name (Exp) = Name_Last then Kind := 'L'; else return; end if; Exp := Prefix (Exp); else Kind := 'E'; end if; if Is_Entity_Name (Exp) and then Present (Entity (Exp)) then Ent := Entity (Exp); end if; end Decompose_Expr; --------------------- -- Fold_General_Op -- --------------------- procedure Fold_General_Op (Is_Static : Boolean) is CR : constant Compare_Result := Compile_Time_Compare (Left, Right, Assume_Valid => False); Result : Boolean; begin if CR = Unknown then return; end if; case Nkind (N) is when N_Op_Eq => if CR = EQ then Result := True; elsif CR = NE or else CR = GT or else CR = LT then Result := False; else return; end if; when N_Op_Ge => if CR = GT or else CR = EQ or else CR = GE then Result := True; elsif CR = LT then Result := False; else return; end if; when N_Op_Gt => if CR = GT then Result := True; elsif CR = EQ or else CR = LT or else CR = LE then Result := False; else return; end if; when N_Op_Le => if CR = LT or else CR = EQ or else CR = LE then Result := True; elsif CR = GT then Result := False; else return; end if; when N_Op_Lt => if CR = LT then Result := True; elsif CR = EQ or else CR = GT or else CR = GE then Result := False; else return; end if; when N_Op_Ne => if CR = NE or else CR = GT or else CR = LT then Result := True; elsif CR = EQ then Result := False; else return; end if; when others => raise Program_Error; end case; -- Determine the potential outcome of the relation assuming the -- operands are valid and emit a warning when the relation yields -- True or False only in the presence of invalid values. Warn_On_Constant_Valid_Condition (N); Fold_Uint (N, Test (Result), Is_Static); end Fold_General_Op; ------------------------- -- Fold_Static_Real_Op -- ------------------------- procedure Fold_Static_Real_Op is Left_Real : constant Ureal := Expr_Value_R (Left); Right_Real : constant Ureal := Expr_Value_R (Right); Result : Boolean; begin case Nkind (N) is when N_Op_Eq => Result := (Left_Real = Right_Real); when N_Op_Ge => Result := (Left_Real >= Right_Real); when N_Op_Gt => Result := (Left_Real > Right_Real); when N_Op_Le => Result := (Left_Real <= Right_Real); when N_Op_Lt => Result := (Left_Real < Right_Real); when N_Op_Ne => Result := (Left_Real /= Right_Real); when others => raise Program_Error; end case; Fold_Uint (N, Test (Result), True); end Fold_Static_Real_Op; ------------------- -- Static_Length -- ------------------- function Static_Length (Expr : Node_Id) return Uint is Cons1 : Uint; Cons2 : Uint; Ent1 : Entity_Id; Ent2 : Entity_Id; Kind1 : Character; Kind2 : Character; Typ : Entity_Id; begin -- First easy case string literal if Nkind (Expr) = N_String_Literal then return UI_From_Int (String_Length (Strval (Expr))); -- With frontend inlining as performed in GNATprove mode, a variable -- may be inserted that has a string literal subtype. Deal with this -- specially as for the previous case. elsif Ekind (Etype (Expr)) = E_String_Literal_Subtype then return String_Literal_Length (Etype (Expr)); -- Second easy case, not constrained subtype, so no length elsif not Is_Constrained (Etype (Expr)) then return Uint_Minus_1; end if; -- General case Typ := Etype (First_Index (Etype (Expr))); -- The simple case, both bounds are known at compile time if Is_Discrete_Type (Typ) and then Compile_Time_Known_Value (Type_Low_Bound (Typ)) and then Compile_Time_Known_Value (Type_High_Bound (Typ)) then return UI_Max (Uint_0, Expr_Value (Type_High_Bound (Typ)) - Expr_Value (Type_Low_Bound (Typ)) + 1); end if; -- A more complex case, where the bounds are of the form X [+/- K1] -- .. X [+/- K2]), where X is an expression that is either A'First or -- A'Last (with A an entity name), or X is an entity name, and the -- two X's are the same and K1 and K2 are known at compile time, in -- this case, the length can also be computed at compile time, even -- though the bounds are not known. A common case of this is e.g. -- (X'First .. X'First+5). Decompose_Expr (Original_Node (Type_Low_Bound (Typ)), Ent1, Kind1, Cons1); Decompose_Expr (Original_Node (Type_High_Bound (Typ)), Ent2, Kind2, Cons2); if Present (Ent1) and then Ent1 = Ent2 and then Kind1 = Kind2 then return Cons2 - Cons1 + 1; else return Uint_Minus_1; end if; end Static_Length; -- Local variables Left_Typ : constant Entity_Id := Etype (Left); Right_Typ : constant Entity_Id := Etype (Right); Fold : Boolean; Left_Len : Uint; Op_Typ : Entity_Id := Empty; Right_Len : Uint; Is_Static_Expression : Boolean; -- Start of processing for Eval_Relational_Op begin -- One special case to deal with first. If we can tell that the result -- will be false because the lengths of one or more index subtypes are -- compile-time known and different, then we can replace the entire -- result by False. We only do this for one-dimensional arrays, because -- the case of multidimensional arrays is rare and too much trouble. If -- one of the operands is an illegal aggregate, its type might still be -- an arbitrary composite type, so nothing to do. if Is_Array_Type (Left_Typ) and then Left_Typ /= Any_Composite and then Number_Dimensions (Left_Typ) = 1 and then Nkind_In (N, N_Op_Eq, N_Op_Ne) then if Raises_Constraint_Error (Left) or else Raises_Constraint_Error (Right) then return; -- OK, we have the case where we may be able to do this fold else Left_Len := Static_Length (Left); Right_Len := Static_Length (Right); if Left_Len /= Uint_Minus_1 and then Right_Len /= Uint_Minus_1 and then Left_Len /= Right_Len then Fold_Uint (N, Test (Nkind (N) = N_Op_Ne), False); Warn_On_Known_Condition (N); return; end if; end if; -- General case else -- Initialize the value of Is_Static_Expression. The value of Fold -- returned by Test_Expression_Is_Foldable is not needed since, even -- when some operand is a variable, we can still perform the static -- evaluation of the expression in some cases (for example, for a -- variable of a subtype of Integer we statically know that any value -- stored in such variable is smaller than Integer'Last). Test_Expression_Is_Foldable (N, Left, Right, Is_Static_Expression, Fold); -- Only comparisons of scalars can give static results. A comparison -- of strings never yields a static result, even if both operands are -- static strings, except that as noted above, we allow equality and -- inequality for strings. if Is_String_Type (Left_Typ) and then not Comes_From_Source (N) and then Nkind_In (N, N_Op_Eq, N_Op_Ne) then null; elsif not Is_Scalar_Type (Left_Typ) then Is_Static_Expression := False; Set_Is_Static_Expression (N, False); end if; -- For operators on universal numeric types called as functions with -- an explicit scope, determine appropriate specific numeric type, -- and diagnose possible ambiguity. if Is_Universal_Numeric_Type (Left_Typ) and then Is_Universal_Numeric_Type (Right_Typ) then Op_Typ := Find_Universal_Operator_Type (N); end if; -- Attempt to fold the relational operator if Is_Static_Expression and then Is_Real_Type (Left_Typ) then Fold_Static_Real_Op; else Fold_General_Op (Is_Static_Expression); end if; end if; -- For the case of a folded relational operator on a specific numeric -- type, freeze the operand type now. if Present (Op_Typ) then Freeze_Before (N, Op_Typ); end if; Warn_On_Known_Condition (N); end Eval_Relational_Op; ---------------- -- Eval_Shift -- ---------------- -- Shift operations are intrinsic operations that can never be static, so -- the only processing required is to perform the required check for a non -- static context for the two operands. -- Actually we could do some compile time evaluation here some time ??? procedure Eval_Shift (N : Node_Id) is begin Check_Non_Static_Context (Left_Opnd (N)); Check_Non_Static_Context (Right_Opnd (N)); end Eval_Shift; ------------------------ -- Eval_Short_Circuit -- ------------------------ -- A short circuit operation is potentially static if both operands are -- potentially static (RM 4.9 (13)). procedure Eval_Short_Circuit (N : Node_Id) is Kind : constant Node_Kind := Nkind (N); Left : constant Node_Id := Left_Opnd (N); Right : constant Node_Id := Right_Opnd (N); Left_Int : Uint; Rstat : constant Boolean := Is_Static_Expression (Left) and then Is_Static_Expression (Right); begin -- Short circuit operations are never static in Ada 83 if Ada_Version = Ada_83 and then Comes_From_Source (N) then Check_Non_Static_Context (Left); Check_Non_Static_Context (Right); return; end if; -- Now look at the operands, we can't quite use the normal call to -- Test_Expression_Is_Foldable here because short circuit operations -- are a special case, they can still be foldable, even if the right -- operand raises constraint error. -- If either operand is Any_Type, just propagate to result and do not -- try to fold, this prevents cascaded errors. if Etype (Left) = Any_Type or else Etype (Right) = Any_Type then Set_Etype (N, Any_Type); return; -- If left operand raises constraint error, then replace node N with -- the raise constraint error node, and we are obviously not foldable. -- Is_Static_Expression is set from the two operands in the normal way, -- and we check the right operand if it is in a non-static context. elsif Raises_Constraint_Error (Left) then if not Rstat then Check_Non_Static_Context (Right); end if; Rewrite_In_Raise_CE (N, Left); Set_Is_Static_Expression (N, Rstat); return; -- If the result is not static, then we won't in any case fold elsif not Rstat then Check_Non_Static_Context (Left); Check_Non_Static_Context (Right); return; end if; -- Here the result is static, note that, unlike the normal processing -- in Test_Expression_Is_Foldable, we did *not* check above to see if -- the right operand raises constraint error, that's because it is not -- significant if the left operand is decisive. Set_Is_Static_Expression (N); -- It does not matter if the right operand raises constraint error if -- it will not be evaluated. So deal specially with the cases where -- the right operand is not evaluated. Note that we will fold these -- cases even if the right operand is non-static, which is fine, but -- of course in these cases the result is not potentially static. Left_Int := Expr_Value (Left); if (Kind = N_And_Then and then Is_False (Left_Int)) or else (Kind = N_Or_Else and then Is_True (Left_Int)) then Fold_Uint (N, Left_Int, Rstat); return; end if; -- If first operand not decisive, then it does matter if the right -- operand raises constraint error, since it will be evaluated, so -- we simply replace the node with the right operand. Note that this -- properly propagates Is_Static_Expression and Raises_Constraint_Error -- (both are set to True in Right). if Raises_Constraint_Error (Right) then Rewrite_In_Raise_CE (N, Right); Check_Non_Static_Context (Left); return; end if; -- Otherwise the result depends on the right operand Fold_Uint (N, Expr_Value (Right), Rstat); return; end Eval_Short_Circuit; ---------------- -- Eval_Slice -- ---------------- -- Slices can never be static, so the only processing required is to check -- for non-static context if an explicit range is given. procedure Eval_Slice (N : Node_Id) is Drange : constant Node_Id := Discrete_Range (N); begin if Nkind (Drange) = N_Range then Check_Non_Static_Context (Low_Bound (Drange)); Check_Non_Static_Context (High_Bound (Drange)); end if; -- A slice of the form A (subtype), when the subtype is the index of -- the type of A, is redundant, the slice can be replaced with A, and -- this is worth a warning. if Is_Entity_Name (Prefix (N)) then declare E : constant Entity_Id := Entity (Prefix (N)); T : constant Entity_Id := Etype (E); begin if Ekind (E) = E_Constant and then Is_Array_Type (T) and then Is_Entity_Name (Drange) then if Is_Entity_Name (Original_Node (First_Index (T))) and then Entity (Original_Node (First_Index (T))) = Entity (Drange) then if Warn_On_Redundant_Constructs then Error_Msg_N ("redundant slice denotes whole array?r?", N); end if; -- The following might be a useful optimization??? -- Rewrite (N, New_Occurrence_Of (E, Sloc (N))); end if; end if; end; end if; end Eval_Slice; ------------------------- -- Eval_String_Literal -- ------------------------- procedure Eval_String_Literal (N : Node_Id) is Typ : constant Entity_Id := Etype (N); Bas : constant Entity_Id := Base_Type (Typ); Xtp : Entity_Id; Len : Nat; Lo : Node_Id; begin -- Nothing to do if error type (handles cases like default expressions -- or generics where we have not yet fully resolved the type). if Bas = Any_Type or else Bas = Any_String then return; end if; -- String literals are static if the subtype is static (RM 4.9(2)), so -- reset the static expression flag (it was set unconditionally in -- Analyze_String_Literal) if the subtype is non-static. We tell if -- the subtype is static by looking at the lower bound. if Ekind (Typ) = E_String_Literal_Subtype then if not Is_OK_Static_Expression (String_Literal_Low_Bound (Typ)) then Set_Is_Static_Expression (N, False); return; end if; -- Here if Etype of string literal is normal Etype (not yet possible, -- but may be possible in future). elsif not Is_OK_Static_Expression (Type_Low_Bound (Etype (First_Index (Typ)))) then Set_Is_Static_Expression (N, False); return; end if; -- If original node was a type conversion, then result if non-static if Nkind (Original_Node (N)) = N_Type_Conversion then Set_Is_Static_Expression (N, False); return; end if; -- Test for illegal Ada 95 cases. A string literal is illegal in Ada 95 -- if its bounds are outside the index base type and this index type is -- static. This can happen in only two ways. Either the string literal -- is too long, or it is null, and the lower bound is type'First. Either -- way it is the upper bound that is out of range of the index type. if Ada_Version >= Ada_95 then if Is_Standard_String_Type (Bas) then Xtp := Standard_Positive; else Xtp := Etype (First_Index (Bas)); end if; if Ekind (Typ) = E_String_Literal_Subtype then Lo := String_Literal_Low_Bound (Typ); else Lo := Type_Low_Bound (Etype (First_Index (Typ))); end if; -- Check for string too long Len := String_Length (Strval (N)); if UI_From_Int (Len) > String_Type_Len (Bas) then -- Issue message. Note that this message is a warning if the -- string literal is not marked as static (happens in some cases -- of folding strings known at compile time, but not static). -- Furthermore in such cases, we reword the message, since there -- is no string literal in the source program. if Is_Static_Expression (N) then Apply_Compile_Time_Constraint_Error (N, "string literal too long for}", CE_Length_Check_Failed, Ent => Bas, Typ => First_Subtype (Bas)); else Apply_Compile_Time_Constraint_Error (N, "string value too long for}", CE_Length_Check_Failed, Ent => Bas, Typ => First_Subtype (Bas), Warn => True); end if; -- Test for null string not allowed elsif Len = 0 and then not Is_Generic_Type (Xtp) and then Expr_Value (Lo) = Expr_Value (Type_Low_Bound (Base_Type (Xtp))) then -- Same specialization of message if Is_Static_Expression (N) then Apply_Compile_Time_Constraint_Error (N, "null string literal not allowed for}", CE_Length_Check_Failed, Ent => Bas, Typ => First_Subtype (Bas)); else Apply_Compile_Time_Constraint_Error (N, "null string value not allowed for}", CE_Length_Check_Failed, Ent => Bas, Typ => First_Subtype (Bas), Warn => True); end if; end if; end if; end Eval_String_Literal; -------------------------- -- Eval_Type_Conversion -- -------------------------- -- A type conversion is potentially static if its subtype mark is for a -- static scalar subtype, and its operand expression is potentially static -- (RM 4.9(10)). procedure Eval_Type_Conversion (N : Node_Id) is Operand : constant Node_Id := Expression (N); Source_Type : constant Entity_Id := Etype (Operand); Target_Type : constant Entity_Id := Etype (N); function To_Be_Treated_As_Integer (T : Entity_Id) return Boolean; -- Returns true if type T is an integer type, or if it is a fixed-point -- type to be treated as an integer (i.e. the flag Conversion_OK is set -- on the conversion node). function To_Be_Treated_As_Real (T : Entity_Id) return Boolean; -- Returns true if type T is a floating-point type, or if it is a -- fixed-point type that is not to be treated as an integer (i.e. the -- flag Conversion_OK is not set on the conversion node). ------------------------------ -- To_Be_Treated_As_Integer -- ------------------------------ function To_Be_Treated_As_Integer (T : Entity_Id) return Boolean is begin return Is_Integer_Type (T) or else (Is_Fixed_Point_Type (T) and then Conversion_OK (N)); end To_Be_Treated_As_Integer; --------------------------- -- To_Be_Treated_As_Real -- --------------------------- function To_Be_Treated_As_Real (T : Entity_Id) return Boolean is begin return Is_Floating_Point_Type (T) or else (Is_Fixed_Point_Type (T) and then not Conversion_OK (N)); end To_Be_Treated_As_Real; -- Local variables Fold : Boolean; Stat : Boolean; -- Start of processing for Eval_Type_Conversion begin -- Cannot fold if target type is non-static or if semantic error if not Is_Static_Subtype (Target_Type) then Check_Non_Static_Context (Operand); return; elsif Error_Posted (N) then return; end if; -- If not foldable we are done Test_Expression_Is_Foldable (N, Operand, Stat, Fold); if not Fold then return; -- Don't try fold if target type has constraint error bounds elsif not Is_OK_Static_Subtype (Target_Type) then Set_Raises_Constraint_Error (N); return; end if; -- Remaining processing depends on operand types. Note that in the -- following type test, fixed-point counts as real unless the flag -- Conversion_OK is set, in which case it counts as integer. -- Fold conversion, case of string type. The result is not static if Is_String_Type (Target_Type) then Fold_Str (N, Strval (Get_String_Val (Operand)), Static => False); return; -- Fold conversion, case of integer target type elsif To_Be_Treated_As_Integer (Target_Type) then declare Result : Uint; begin -- Integer to integer conversion if To_Be_Treated_As_Integer (Source_Type) then Result := Expr_Value (Operand); -- Real to integer conversion else Result := UR_To_Uint (Expr_Value_R (Operand)); end if; -- If fixed-point type (Conversion_OK must be set), then the -- result is logically an integer, but we must replace the -- conversion with the corresponding real literal, since the -- type from a semantic point of view is still fixed-point. if Is_Fixed_Point_Type (Target_Type) then Fold_Ureal (N, UR_From_Uint (Result) * Small_Value (Target_Type), Stat); -- Otherwise result is integer literal else Fold_Uint (N, Result, Stat); end if; end; -- Fold conversion, case of real target type elsif To_Be_Treated_As_Real (Target_Type) then declare Result : Ureal; begin if To_Be_Treated_As_Real (Source_Type) then Result := Expr_Value_R (Operand); else Result := UR_From_Uint (Expr_Value (Operand)); end if; Fold_Ureal (N, Result, Stat); end; -- Enumeration types else Fold_Uint (N, Expr_Value (Operand), Stat); end if; if Is_Out_Of_Range (N, Etype (N), Assume_Valid => True) then Out_Of_Range (N); end if; end Eval_Type_Conversion; ------------------- -- Eval_Unary_Op -- ------------------- -- Predefined unary operators are static functions (RM 4.9(20)) and thus -- are potentially static if the operand is potentially static (RM 4.9(7)). procedure Eval_Unary_Op (N : Node_Id) is Right : constant Node_Id := Right_Opnd (N); Otype : Entity_Id := Empty; Stat : Boolean; Fold : Boolean; begin -- If not foldable we are done Test_Expression_Is_Foldable (N, Right, Stat, Fold); if not Fold then return; end if; if Etype (Right) = Universal_Integer or else Etype (Right) = Universal_Real then Otype := Find_Universal_Operator_Type (N); end if; -- Fold for integer case if Is_Integer_Type (Etype (N)) then declare Rint : constant Uint := Expr_Value (Right); Result : Uint; begin -- In the case of modular unary plus and abs there is no need -- to adjust the result of the operation since if the original -- operand was in bounds the result will be in the bounds of the -- modular type. However, in the case of modular unary minus the -- result may go out of the bounds of the modular type and needs -- adjustment. if Nkind (N) = N_Op_Plus then Result := Rint; elsif Nkind (N) = N_Op_Minus then if Is_Modular_Integer_Type (Etype (N)) then Result := (-Rint) mod Modulus (Etype (N)); else Result := (-Rint); end if; else pragma Assert (Nkind (N) = N_Op_Abs); Result := abs Rint; end if; Fold_Uint (N, Result, Stat); end; -- Fold for real case elsif Is_Real_Type (Etype (N)) then declare Rreal : constant Ureal := Expr_Value_R (Right); Result : Ureal; begin if Nkind (N) = N_Op_Plus then Result := Rreal; elsif Nkind (N) = N_Op_Minus then Result := UR_Negate (Rreal); else pragma Assert (Nkind (N) = N_Op_Abs); Result := abs Rreal; end if; Fold_Ureal (N, Result, Stat); end; end if; -- If the operator was resolved to a specific type, make sure that type -- is frozen even if the expression is folded into a literal (which has -- a universal type). if Present (Otype) then Freeze_Before (N, Otype); end if; end Eval_Unary_Op; ------------------------------- -- Eval_Unchecked_Conversion -- ------------------------------- -- Unchecked conversions can never be static, so the only required -- processing is to check for a non-static context for the operand. procedure Eval_Unchecked_Conversion (N : Node_Id) is begin Check_Non_Static_Context (Expression (N)); end Eval_Unchecked_Conversion; -------------------- -- Expr_Rep_Value -- -------------------- function Expr_Rep_Value (N : Node_Id) return Uint is Kind : constant Node_Kind := Nkind (N); Ent : Entity_Id; begin if Is_Entity_Name (N) then Ent := Entity (N); -- An enumeration literal that was either in the source or created -- as a result of static evaluation. if Ekind (Ent) = E_Enumeration_Literal then return Enumeration_Rep (Ent); -- A user defined static constant else pragma Assert (Ekind (Ent) = E_Constant); return Expr_Rep_Value (Constant_Value (Ent)); end if; -- An integer literal that was either in the source or created as a -- result of static evaluation. elsif Kind = N_Integer_Literal then return Intval (N); -- A real literal for a fixed-point type. This must be the fixed-point -- case, either the literal is of a fixed-point type, or it is a bound -- of a fixed-point type, with type universal real. In either case we -- obtain the desired value from Corresponding_Integer_Value. elsif Kind = N_Real_Literal then pragma Assert (Is_Fixed_Point_Type (Underlying_Type (Etype (N)))); return Corresponding_Integer_Value (N); -- Otherwise must be character literal else pragma Assert (Kind = N_Character_Literal); Ent := Entity (N); -- Since Character literals of type Standard.Character don't have any -- defining character literals built for them, they do not have their -- Entity set, so just use their Char code. Otherwise for user- -- defined character literals use their Pos value as usual which is -- the same as the Rep value. if No (Ent) then return Char_Literal_Value (N); else return Enumeration_Rep (Ent); end if; end if; end Expr_Rep_Value; ---------------- -- Expr_Value -- ---------------- function Expr_Value (N : Node_Id) return Uint is Kind : constant Node_Kind := Nkind (N); CV_Ent : CV_Entry renames CV_Cache (Nat (N) mod CV_Cache_Size); Ent : Entity_Id; Val : Uint; begin -- If already in cache, then we know it's compile time known and we can -- return the value that was previously stored in the cache since -- compile time known values cannot change. if CV_Ent.N = N then return CV_Ent.V; end if; -- Otherwise proceed to test value if Is_Entity_Name (N) then Ent := Entity (N); -- An enumeration literal that was either in the source or created as -- a result of static evaluation. if Ekind (Ent) = E_Enumeration_Literal then Val := Enumeration_Pos (Ent); -- A user defined static constant else pragma Assert (Ekind (Ent) = E_Constant); Val := Expr_Value (Constant_Value (Ent)); end if; -- An integer literal that was either in the source or created as a -- result of static evaluation. elsif Kind = N_Integer_Literal then Val := Intval (N); -- A real literal for a fixed-point type. This must be the fixed-point -- case, either the literal is of a fixed-point type, or it is a bound -- of a fixed-point type, with type universal real. In either case we -- obtain the desired value from Corresponding_Integer_Value. elsif Kind = N_Real_Literal then pragma Assert (Is_Fixed_Point_Type (Underlying_Type (Etype (N)))); Val := Corresponding_Integer_Value (N); -- The NULL access value elsif Kind = N_Null then pragma Assert (Is_Access_Type (Underlying_Type (Etype (N)))); Val := Uint_0; -- Otherwise must be character literal else pragma Assert (Kind = N_Character_Literal); Ent := Entity (N); -- Since Character literals of type Standard.Character don't -- have any defining character literals built for them, they -- do not have their Entity set, so just use their Char -- code. Otherwise for user-defined character literals use -- their Pos value as usual. if No (Ent) then Val := Char_Literal_Value (N); else Val := Enumeration_Pos (Ent); end if; end if; -- Come here with Val set to value to be returned, set cache CV_Ent.N := N; CV_Ent.V := Val; return Val; end Expr_Value; ------------------ -- Expr_Value_E -- ------------------ function Expr_Value_E (N : Node_Id) return Entity_Id is Ent : constant Entity_Id := Entity (N); begin if Ekind (Ent) = E_Enumeration_Literal then return Ent; else pragma Assert (Ekind (Ent) = E_Constant); return Expr_Value_E (Constant_Value (Ent)); end if; end Expr_Value_E; ------------------ -- Expr_Value_R -- ------------------ function Expr_Value_R (N : Node_Id) return Ureal is Kind : constant Node_Kind := Nkind (N); Ent : Entity_Id; begin if Kind = N_Real_Literal then return Realval (N); elsif Kind = N_Identifier or else Kind = N_Expanded_Name then Ent := Entity (N); pragma Assert (Ekind (Ent) = E_Constant); return Expr_Value_R (Constant_Value (Ent)); elsif Kind = N_Integer_Literal then return UR_From_Uint (Expr_Value (N)); -- Here, we have a node that cannot be interpreted as a compile time -- constant. That is definitely an error. else raise Program_Error; end if; end Expr_Value_R; ------------------ -- Expr_Value_S -- ------------------ function Expr_Value_S (N : Node_Id) return Node_Id is begin if Nkind (N) = N_String_Literal then return N; else pragma Assert (Ekind (Entity (N)) = E_Constant); return Expr_Value_S (Constant_Value (Entity (N))); end if; end Expr_Value_S; ---------------------------------- -- Find_Universal_Operator_Type -- ---------------------------------- function Find_Universal_Operator_Type (N : Node_Id) return Entity_Id is PN : constant Node_Id := Parent (N); Call : constant Node_Id := Original_Node (N); Is_Int : constant Boolean := Is_Integer_Type (Etype (N)); Is_Fix : constant Boolean := Nkind (N) in N_Binary_Op and then Nkind (Right_Opnd (N)) /= Nkind (Left_Opnd (N)); -- A mixed-mode operation in this context indicates the presence of -- fixed-point type in the designated package. Is_Relational : constant Boolean := Etype (N) = Standard_Boolean; -- Case where N is a relational (or membership) operator (else it is an -- arithmetic one). In_Membership : constant Boolean := Nkind (PN) in N_Membership_Test and then Nkind (Right_Opnd (PN)) = N_Range and then Is_Universal_Numeric_Type (Etype (Left_Opnd (PN))) and then Is_Universal_Numeric_Type (Etype (Low_Bound (Right_Opnd (PN)))) and then Is_Universal_Numeric_Type (Etype (High_Bound (Right_Opnd (PN)))); -- Case where N is part of a membership test with a universal range E : Entity_Id; Pack : Entity_Id; Typ1 : Entity_Id := Empty; Priv_E : Entity_Id; function Is_Mixed_Mode_Operand (Op : Node_Id) return Boolean; -- Check whether one operand is a mixed-mode operation that requires the -- presence of a fixed-point type. Given that all operands are universal -- and have been constant-folded, retrieve the original function call. --------------------------- -- Is_Mixed_Mode_Operand -- --------------------------- function Is_Mixed_Mode_Operand (Op : Node_Id) return Boolean is Onod : constant Node_Id := Original_Node (Op); begin return Nkind (Onod) = N_Function_Call and then Present (Next_Actual (First_Actual (Onod))) and then Etype (First_Actual (Onod)) /= Etype (Next_Actual (First_Actual (Onod))); end Is_Mixed_Mode_Operand; -- Start of processing for Find_Universal_Operator_Type begin if Nkind (Call) /= N_Function_Call or else Nkind (Name (Call)) /= N_Expanded_Name then return Empty; -- There are several cases where the context does not imply the type of -- the operands: -- - the universal expression appears in a type conversion; -- - the expression is a relational operator applied to universal -- operands; -- - the expression is a membership test with a universal operand -- and a range with universal bounds. elsif Nkind (Parent (N)) = N_Type_Conversion or else Is_Relational or else In_Membership then Pack := Entity (Prefix (Name (Call))); -- If the prefix is a package declared elsewhere, iterate over its -- visible entities, otherwise iterate over all declarations in the -- designated scope. if Ekind (Pack) = E_Package and then not In_Open_Scopes (Pack) then Priv_E := First_Private_Entity (Pack); else Priv_E := Empty; end if; Typ1 := Empty; E := First_Entity (Pack); while Present (E) and then E /= Priv_E loop if Is_Numeric_Type (E) and then Nkind (Parent (E)) /= N_Subtype_Declaration and then Comes_From_Source (E) and then Is_Integer_Type (E) = Is_Int and then (Nkind (N) in N_Unary_Op or else Is_Relational or else Is_Fixed_Point_Type (E) = Is_Fix) then if No (Typ1) then Typ1 := E; -- Before emitting an error, check for the presence of a -- mixed-mode operation that specifies a fixed point type. elsif Is_Relational and then (Is_Mixed_Mode_Operand (Left_Opnd (N)) or else Is_Mixed_Mode_Operand (Right_Opnd (N))) and then Is_Fixed_Point_Type (E) /= Is_Fixed_Point_Type (Typ1) then if Is_Fixed_Point_Type (E) then Typ1 := E; end if; else -- More than one type of the proper class declared in P Error_Msg_N ("ambiguous operation", N); Error_Msg_Sloc := Sloc (Typ1); Error_Msg_N ("\possible interpretation (inherited)#", N); Error_Msg_Sloc := Sloc (E); Error_Msg_N ("\possible interpretation (inherited)#", N); return Empty; end if; end if; Next_Entity (E); end loop; end if; return Typ1; end Find_Universal_Operator_Type; -------------------------- -- Flag_Non_Static_Expr -- -------------------------- procedure Flag_Non_Static_Expr (Msg : String; Expr : Node_Id) is begin if Error_Posted (Expr) and then not All_Errors_Mode then return; else Error_Msg_F (Msg, Expr); Why_Not_Static (Expr); end if; end Flag_Non_Static_Expr; -------------- -- Fold_Str -- -------------- procedure Fold_Str (N : Node_Id; Val : String_Id; Static : Boolean) is Loc : constant Source_Ptr := Sloc (N); Typ : constant Entity_Id := Etype (N); begin if Raises_Constraint_Error (N) then Set_Is_Static_Expression (N, Static); return; end if; Rewrite (N, Make_String_Literal (Loc, Strval => Val)); -- We now have the literal with the right value, both the actual type -- and the expected type of this literal are taken from the expression -- that was evaluated. So now we do the Analyze and Resolve. -- Note that we have to reset Is_Static_Expression both after the -- analyze step (because Resolve will evaluate the literal, which -- will cause semantic errors if it is marked as static), and after -- the Resolve step (since Resolve in some cases resets this flag). Analyze (N); Set_Is_Static_Expression (N, Static); Set_Etype (N, Typ); Resolve (N); Set_Is_Static_Expression (N, Static); end Fold_Str; --------------- -- Fold_Uint -- --------------- procedure Fold_Uint (N : Node_Id; Val : Uint; Static : Boolean) is Loc : constant Source_Ptr := Sloc (N); Typ : Entity_Id := Etype (N); Ent : Entity_Id; begin if Raises_Constraint_Error (N) then Set_Is_Static_Expression (N, Static); return; end if; -- If we are folding a named number, retain the entity in the literal, -- for ASIS use. if Is_Entity_Name (N) and then Ekind (Entity (N)) = E_Named_Integer then Ent := Entity (N); else Ent := Empty; end if; if Is_Private_Type (Typ) then Typ := Full_View (Typ); end if; -- For a result of type integer, substitute an N_Integer_Literal node -- for the result of the compile time evaluation of the expression. -- For ASIS use, set a link to the original named number when not in -- a generic context. if Is_Integer_Type (Typ) then Rewrite (N, Make_Integer_Literal (Loc, Val)); Set_Original_Entity (N, Ent); -- Otherwise we have an enumeration type, and we substitute either -- an N_Identifier or N_Character_Literal to represent the enumeration -- literal corresponding to the given value, which must always be in -- range, because appropriate tests have already been made for this. else pragma Assert (Is_Enumeration_Type (Typ)); Rewrite (N, Get_Enum_Lit_From_Pos (Etype (N), Val, Loc)); end if; -- We now have the literal with the right value, both the actual type -- and the expected type of this literal are taken from the expression -- that was evaluated. So now we do the Analyze and Resolve. -- Note that we have to reset Is_Static_Expression both after the -- analyze step (because Resolve will evaluate the literal, which -- will cause semantic errors if it is marked as static), and after -- the Resolve step (since Resolve in some cases sets this flag). Analyze (N); Set_Is_Static_Expression (N, Static); Set_Etype (N, Typ); Resolve (N); Set_Is_Static_Expression (N, Static); end Fold_Uint; ---------------- -- Fold_Ureal -- ---------------- procedure Fold_Ureal (N : Node_Id; Val : Ureal; Static : Boolean) is Loc : constant Source_Ptr := Sloc (N); Typ : constant Entity_Id := Etype (N); Ent : Entity_Id; begin if Raises_Constraint_Error (N) then Set_Is_Static_Expression (N, Static); return; end if; -- If we are folding a named number, retain the entity in the literal, -- for ASIS use. if Is_Entity_Name (N) and then Ekind (Entity (N)) = E_Named_Real then Ent := Entity (N); else Ent := Empty; end if; Rewrite (N, Make_Real_Literal (Loc, Realval => Val)); -- Set link to original named number, for ASIS use Set_Original_Entity (N, Ent); -- We now have the literal with the right value, both the actual type -- and the expected type of this literal are taken from the expression -- that was evaluated. So now we do the Analyze and Resolve. -- Note that we have to reset Is_Static_Expression both after the -- analyze step (because Resolve will evaluate the literal, which -- will cause semantic errors if it is marked as static), and after -- the Resolve step (since Resolve in some cases sets this flag). Analyze (N); Set_Is_Static_Expression (N, Static); Set_Etype (N, Typ); Resolve (N); Set_Is_Static_Expression (N, Static); end Fold_Ureal; --------------- -- From_Bits -- --------------- function From_Bits (B : Bits; T : Entity_Id) return Uint is V : Uint := Uint_0; begin for J in 0 .. B'Last loop if B (J) then V := V + 2 ** J; end if; end loop; if Non_Binary_Modulus (T) then V := V mod Modulus (T); end if; return V; end From_Bits; -------------------- -- Get_String_Val -- -------------------- function Get_String_Val (N : Node_Id) return Node_Id is begin if Nkind_In (N, N_String_Literal, N_Character_Literal) then return N; else pragma Assert (Is_Entity_Name (N)); return Get_String_Val (Constant_Value (Entity (N))); end if; end Get_String_Val; ---------------- -- Initialize -- ---------------- procedure Initialize is begin CV_Cache := (others => (Node_High_Bound, Uint_0)); end Initialize; -------------------- -- In_Subrange_Of -- -------------------- function In_Subrange_Of (T1 : Entity_Id; T2 : Entity_Id; Fixed_Int : Boolean := False) return Boolean is L1 : Node_Id; H1 : Node_Id; L2 : Node_Id; H2 : Node_Id; begin if T1 = T2 or else Is_Subtype_Of (T1, T2) then return True; -- Never in range if both types are not scalar. Don't know if this can -- actually happen, but just in case. elsif not Is_Scalar_Type (T1) or else not Is_Scalar_Type (T2) then return False; -- If T1 has infinities but T2 doesn't have infinities, then T1 is -- definitely not compatible with T2. elsif Is_Floating_Point_Type (T1) and then Has_Infinities (T1) and then Is_Floating_Point_Type (T2) and then not Has_Infinities (T2) then return False; else L1 := Type_Low_Bound (T1); H1 := Type_High_Bound (T1); L2 := Type_Low_Bound (T2); H2 := Type_High_Bound (T2); -- Check bounds to see if comparison possible at compile time if Compile_Time_Compare (L1, L2, Assume_Valid => True) in Compare_GE and then Compile_Time_Compare (H1, H2, Assume_Valid => True) in Compare_LE then return True; end if; -- If bounds not comparable at compile time, then the bounds of T2 -- must be compile time known or we cannot answer the query. if not Compile_Time_Known_Value (L2) or else not Compile_Time_Known_Value (H2) then return False; end if; -- If the bounds of T1 are know at compile time then use these -- ones, otherwise use the bounds of the base type (which are of -- course always static). if not Compile_Time_Known_Value (L1) then L1 := Type_Low_Bound (Base_Type (T1)); end if; if not Compile_Time_Known_Value (H1) then H1 := Type_High_Bound (Base_Type (T1)); end if; -- Fixed point types should be considered as such only if -- flag Fixed_Int is set to False. if Is_Floating_Point_Type (T1) or else Is_Floating_Point_Type (T2) or else (Is_Fixed_Point_Type (T1) and then not Fixed_Int) or else (Is_Fixed_Point_Type (T2) and then not Fixed_Int) then return Expr_Value_R (L2) <= Expr_Value_R (L1) and then Expr_Value_R (H2) >= Expr_Value_R (H1); else return Expr_Value (L2) <= Expr_Value (L1) and then Expr_Value (H2) >= Expr_Value (H1); end if; end if; -- If any exception occurs, it means that we have some bug in the compiler -- possibly triggered by a previous error, or by some unforeseen peculiar -- occurrence. However, this is only an optimization attempt, so there is -- really no point in crashing the compiler. Instead we just decide, too -- bad, we can't figure out the answer in this case after all. exception when others => -- Debug flag K disables this behavior (useful for debugging) if Debug_Flag_K then raise; else return False; end if; end In_Subrange_Of; ----------------- -- Is_In_Range -- ----------------- function Is_In_Range (N : Node_Id; Typ : Entity_Id; Assume_Valid : Boolean := False; Fixed_Int : Boolean := False; Int_Real : Boolean := False) return Boolean is begin return Test_In_Range (N, Typ, Assume_Valid, Fixed_Int, Int_Real) = In_Range; end Is_In_Range; ------------------- -- Is_Null_Range -- ------------------- function Is_Null_Range (Lo : Node_Id; Hi : Node_Id) return Boolean is begin if Compile_Time_Known_Value (Lo) and then Compile_Time_Known_Value (Hi) then declare Typ : Entity_Id := Etype (Lo); begin -- When called from the frontend, as part of the analysis of -- potentially static expressions, Typ will be the full view of a -- type with all the info needed to answer this query. When called -- from the backend, for example to know whether a range of a loop -- is null, Typ might be a private type and we need to explicitly -- switch to its corresponding full view to access the same info. if Is_Incomplete_Or_Private_Type (Typ) and then Present (Full_View (Typ)) then Typ := Full_View (Typ); end if; if Is_Discrete_Type (Typ) then return Expr_Value (Lo) > Expr_Value (Hi); else pragma Assert (Is_Real_Type (Typ)); return Expr_Value_R (Lo) > Expr_Value_R (Hi); end if; end; else return False; end if; end Is_Null_Range; ------------------------- -- Is_OK_Static_Choice -- ------------------------- function Is_OK_Static_Choice (Choice : Node_Id) return Boolean is begin -- Check various possibilities for choice -- Note: for membership tests, we test more cases than are possible -- (in particular subtype indication), but it doesn't matter because -- it just won't occur (we have already done a syntax check). if Nkind (Choice) = N_Others_Choice then return True; elsif Nkind (Choice) = N_Range then return Is_OK_Static_Range (Choice); elsif Nkind (Choice) = N_Subtype_Indication or else (Is_Entity_Name (Choice) and then Is_Type (Entity (Choice))) then return Is_OK_Static_Subtype (Etype (Choice)); else return Is_OK_Static_Expression (Choice); end if; end Is_OK_Static_Choice; ------------------------------ -- Is_OK_Static_Choice_List -- ------------------------------ function Is_OK_Static_Choice_List (Choices : List_Id) return Boolean is Choice : Node_Id; begin if not Is_Static_Choice_List (Choices) then return False; end if; Choice := First (Choices); while Present (Choice) loop if not Is_OK_Static_Choice (Choice) then Set_Raises_Constraint_Error (Choice); return False; end if; Next (Choice); end loop; return True; end Is_OK_Static_Choice_List; ----------------------------- -- Is_OK_Static_Expression -- ----------------------------- function Is_OK_Static_Expression (N : Node_Id) return Boolean is begin return Is_Static_Expression (N) and then not Raises_Constraint_Error (N); end Is_OK_Static_Expression; ------------------------ -- Is_OK_Static_Range -- ------------------------ -- A static range is a range whose bounds are static expressions, or a -- Range_Attribute_Reference equivalent to such a range (RM 4.9(26)). -- We have already converted range attribute references, so we get the -- "or" part of this rule without needing a special test. function Is_OK_Static_Range (N : Node_Id) return Boolean is begin return Is_OK_Static_Expression (Low_Bound (N)) and then Is_OK_Static_Expression (High_Bound (N)); end Is_OK_Static_Range; -------------------------- -- Is_OK_Static_Subtype -- -------------------------- -- Determines if Typ is a static subtype as defined in (RM 4.9(26)) where -- neither bound raises constraint error when evaluated. function Is_OK_Static_Subtype (Typ : Entity_Id) return Boolean is Base_T : constant Entity_Id := Base_Type (Typ); Anc_Subt : Entity_Id; begin -- First a quick check on the non static subtype flag. As described -- in further detail in Einfo, this flag is not decisive in all cases, -- but if it is set, then the subtype is definitely non-static. if Is_Non_Static_Subtype (Typ) then return False; end if; Anc_Subt := Ancestor_Subtype (Typ); if Anc_Subt = Empty then Anc_Subt := Base_T; end if; if Is_Generic_Type (Root_Type (Base_T)) or else Is_Generic_Actual_Type (Base_T) then return False; elsif Has_Dynamic_Predicate_Aspect (Typ) then return False; -- String types elsif Is_String_Type (Typ) then return Ekind (Typ) = E_String_Literal_Subtype or else (Is_OK_Static_Subtype (Component_Type (Typ)) and then Is_OK_Static_Subtype (Etype (First_Index (Typ)))); -- Scalar types elsif Is_Scalar_Type (Typ) then if Base_T = Typ then return True; else -- Scalar_Range (Typ) might be an N_Subtype_Indication, so use -- Get_Type_{Low,High}_Bound. return Is_OK_Static_Subtype (Anc_Subt) and then Is_OK_Static_Expression (Type_Low_Bound (Typ)) and then Is_OK_Static_Expression (Type_High_Bound (Typ)); end if; -- Types other than string and scalar types are never static else return False; end if; end Is_OK_Static_Subtype; --------------------- -- Is_Out_Of_Range -- --------------------- function Is_Out_Of_Range (N : Node_Id; Typ : Entity_Id; Assume_Valid : Boolean := False; Fixed_Int : Boolean := False; Int_Real : Boolean := False) return Boolean is begin return Test_In_Range (N, Typ, Assume_Valid, Fixed_Int, Int_Real) = Out_Of_Range; end Is_Out_Of_Range; ---------------------- -- Is_Static_Choice -- ---------------------- function Is_Static_Choice (Choice : Node_Id) return Boolean is begin -- Check various possibilities for choice -- Note: for membership tests, we test more cases than are possible -- (in particular subtype indication), but it doesn't matter because -- it just won't occur (we have already done a syntax check). if Nkind (Choice) = N_Others_Choice then return True; elsif Nkind (Choice) = N_Range then return Is_Static_Range (Choice); elsif Nkind (Choice) = N_Subtype_Indication or else (Is_Entity_Name (Choice) and then Is_Type (Entity (Choice))) then return Is_Static_Subtype (Etype (Choice)); else return Is_Static_Expression (Choice); end if; end Is_Static_Choice; --------------------------- -- Is_Static_Choice_List -- --------------------------- function Is_Static_Choice_List (Choices : List_Id) return Boolean is Choice : Node_Id; begin Choice := First (Choices); while Present (Choice) loop if not Is_Static_Choice (Choice) then return False; end if; Next (Choice); end loop; return True; end Is_Static_Choice_List; --------------------- -- Is_Static_Range -- --------------------- -- A static range is a range whose bounds are static expressions, or a -- Range_Attribute_Reference equivalent to such a range (RM 4.9(26)). -- We have already converted range attribute references, so we get the -- "or" part of this rule without needing a special test. function Is_Static_Range (N : Node_Id) return Boolean is begin return Is_Static_Expression (Low_Bound (N)) and then Is_Static_Expression (High_Bound (N)); end Is_Static_Range; ----------------------- -- Is_Static_Subtype -- ----------------------- -- Determines if Typ is a static subtype as defined in (RM 4.9(26)) function Is_Static_Subtype (Typ : Entity_Id) return Boolean is Base_T : constant Entity_Id := Base_Type (Typ); Anc_Subt : Entity_Id; begin -- First a quick check on the non static subtype flag. As described -- in further detail in Einfo, this flag is not decisive in all cases, -- but if it is set, then the subtype is definitely non-static. if Is_Non_Static_Subtype (Typ) then return False; end if; Anc_Subt := Ancestor_Subtype (Typ); if Anc_Subt = Empty then Anc_Subt := Base_T; end if; if Is_Generic_Type (Root_Type (Base_T)) or else Is_Generic_Actual_Type (Base_T) then return False; -- If there is a dynamic predicate for the type (declared or inherited) -- the expression is not static. elsif Has_Dynamic_Predicate_Aspect (Typ) or else (Is_Derived_Type (Typ) and then Has_Aspect (Typ, Aspect_Dynamic_Predicate)) then return False; -- String types elsif Is_String_Type (Typ) then return Ekind (Typ) = E_String_Literal_Subtype or else (Is_Static_Subtype (Component_Type (Typ)) and then Is_Static_Subtype (Etype (First_Index (Typ)))); -- Scalar types elsif Is_Scalar_Type (Typ) then if Base_T = Typ then return True; else return Is_Static_Subtype (Anc_Subt) and then Is_Static_Expression (Type_Low_Bound (Typ)) and then Is_Static_Expression (Type_High_Bound (Typ)); end if; -- Types other than string and scalar types are never static else return False; end if; end Is_Static_Subtype; ------------------------------- -- Is_Statically_Unevaluated -- ------------------------------- function Is_Statically_Unevaluated (Expr : Node_Id) return Boolean is function Check_Case_Expr_Alternative (CEA : Node_Id) return Match_Result; -- We have a message emanating from the Expression of a case expression -- alternative. We examine this alternative, as follows: -- -- If the selecting expression of the parent case is non-static, or -- if any of the discrete choices of the given case alternative are -- non-static or raise Constraint_Error, return Non_Static. -- -- Otherwise check if the selecting expression matches any of the given -- discrete choices. If so, the alternative is executed and we return -- Match, otherwise, the alternative can never be executed, and so we -- return No_Match. --------------------------------- -- Check_Case_Expr_Alternative -- --------------------------------- function Check_Case_Expr_Alternative (CEA : Node_Id) return Match_Result is Case_Exp : constant Node_Id := Parent (CEA); Choice : Node_Id; Prev_CEA : Node_Id; begin pragma Assert (Nkind (Case_Exp) = N_Case_Expression); -- Check that selecting expression is static if not Is_OK_Static_Expression (Expression (Case_Exp)) then return Non_Static; end if; if not Is_OK_Static_Choice_List (Discrete_Choices (CEA)) then return Non_Static; end if; -- All choices are now known to be static. Now see if alternative -- matches one of the choices. Choice := First (Discrete_Choices (CEA)); while Present (Choice) loop -- Check various possibilities for choice, returning Match if we -- find the selecting value matches any of the choices. Note that -- we know we are the last choice, so we don't have to keep going. if Nkind (Choice) = N_Others_Choice then -- Others choice is a bit annoying, it matches if none of the -- previous alternatives matches (note that we know we are the -- last alternative in this case, so we can just go backwards -- from us to see if any previous one matches). Prev_CEA := Prev (CEA); while Present (Prev_CEA) loop if Check_Case_Expr_Alternative (Prev_CEA) = Match then return No_Match; end if; Prev (Prev_CEA); end loop; return Match; -- Else we have a normal static choice elsif Choice_Matches (Expression (Case_Exp), Choice) = Match then return Match; end if; -- If we fall through, it means that the discrete choice did not -- match the selecting expression, so continue. Next (Choice); end loop; -- If we get through that loop then all choices were static, and none -- of them matched the selecting expression. So return No_Match. return No_Match; end Check_Case_Expr_Alternative; -- Local variables P : Node_Id; OldP : Node_Id; Choice : Node_Id; -- Start of processing for Is_Statically_Unevaluated begin -- The (32.x) references here are from RM section 4.9 -- (32.1) An expression is statically unevaluated if it is part of ... -- This means we have to climb the tree looking for one of the cases P := Expr; loop OldP := P; P := Parent (P); -- (32.2) The right operand of a static short-circuit control form -- whose value is determined by its left operand. -- AND THEN with False as left operand if Nkind (P) = N_And_Then and then Compile_Time_Known_Value (Left_Opnd (P)) and then Is_False (Expr_Value (Left_Opnd (P))) then return True; -- OR ELSE with True as left operand elsif Nkind (P) = N_Or_Else and then Compile_Time_Known_Value (Left_Opnd (P)) and then Is_True (Expr_Value (Left_Opnd (P))) then return True; -- (32.3) A dependent_expression of an if_expression whose associated -- condition is static and equals False. elsif Nkind (P) = N_If_Expression then declare Cond : constant Node_Id := First (Expressions (P)); Texp : constant Node_Id := Next (Cond); Fexp : constant Node_Id := Next (Texp); begin if Compile_Time_Known_Value (Cond) then -- Condition is True and we are in the right operand if Is_True (Expr_Value (Cond)) and then OldP = Fexp then return True; -- Condition is False and we are in the left operand elsif Is_False (Expr_Value (Cond)) and then OldP = Texp then return True; end if; end if; end; -- (32.4) A condition or dependent_expression of an if_expression -- where the condition corresponding to at least one preceding -- dependent_expression of the if_expression is static and equals -- True. -- This refers to cases like -- (if True then 1 elsif 1/0=2 then 2 else 3) -- But we expand elsif's out anyway, so the above looks like: -- (if True then 1 else (if 1/0=2 then 2 else 3)) -- So for us this is caught by the above check for the 32.3 case. -- (32.5) A dependent_expression of a case_expression whose -- selecting_expression is static and whose value is not covered -- by the corresponding discrete_choice_list. elsif Nkind (P) = N_Case_Expression_Alternative then -- First, we have to be in the expression to suppress messages. -- If we are within one of the choices, we want the message. if OldP = Expression (P) then -- Statically unevaluated if alternative does not match if Check_Case_Expr_Alternative (P) = No_Match then return True; end if; end if; -- (32.6) A choice_expression (or a simple_expression of a range -- that occurs as a membership_choice of a membership_choice_list) -- of a static membership test that is preceded in the enclosing -- membership_choice_list by another item whose individual -- membership test (see (RM 4.5.2)) statically yields True. elsif Nkind (P) in N_Membership_Test then -- Only possibly unevaluated if simple expression is static if not Is_OK_Static_Expression (Left_Opnd (P)) then null; -- All members of the choice list must be static elsif (Present (Right_Opnd (P)) and then not Is_OK_Static_Choice (Right_Opnd (P))) or else (Present (Alternatives (P)) and then not Is_OK_Static_Choice_List (Alternatives (P))) then null; -- If expression is the one and only alternative, then it is -- definitely not statically unevaluated, so we only have to -- test the case where there are alternatives present. elsif Present (Alternatives (P)) then -- Look for previous matching Choice Choice := First (Alternatives (P)); while Present (Choice) loop -- If we reached us and no previous choices matched, this -- is not the case where we are statically unevaluated. exit when OldP = Choice; -- If a previous choice matches, then that is the case where -- we know our choice is statically unevaluated. if Choice_Matches (Left_Opnd (P), Choice) = Match then return True; end if; Next (Choice); end loop; -- If we fall through the loop, we were not one of the choices, -- we must have been the expression, so that is not covered by -- this rule, and we keep going. null; end if; end if; -- OK, not statically unevaluated at this level, see if we should -- keep climbing to look for a higher level reason. -- Special case for component association in aggregates, where -- we want to keep climbing up to the parent aggregate. if Nkind (P) = N_Component_Association and then Nkind (Parent (P)) = N_Aggregate then null; -- All done if not still within subexpression else exit when Nkind (P) not in N_Subexpr; end if; end loop; -- If we fall through the loop, not one of the cases covered! return False; end Is_Statically_Unevaluated; -------------------- -- Not_Null_Range -- -------------------- function Not_Null_Range (Lo : Node_Id; Hi : Node_Id) return Boolean is begin if Compile_Time_Known_Value (Lo) and then Compile_Time_Known_Value (Hi) then declare Typ : Entity_Id := Etype (Lo); begin -- When called from the frontend, as part of the analysis of -- potentially static expressions, Typ will be the full view of a -- type with all the info needed to answer this query. When called -- from the backend, for example to know whether a range of a loop -- is null, Typ might be a private type and we need to explicitly -- switch to its corresponding full view to access the same info. if Is_Incomplete_Or_Private_Type (Typ) and then Present (Full_View (Typ)) then Typ := Full_View (Typ); end if; if Is_Discrete_Type (Typ) then return Expr_Value (Lo) <= Expr_Value (Hi); else pragma Assert (Is_Real_Type (Typ)); return Expr_Value_R (Lo) <= Expr_Value_R (Hi); end if; end; else return False; end if; end Not_Null_Range; ------------- -- OK_Bits -- ------------- function OK_Bits (N : Node_Id; Bits : Uint) return Boolean is begin -- We allow a maximum of 500,000 bits which seems a reasonable limit if Bits < 500_000 then return True; -- Error if this maximum is exceeded else Error_Msg_N ("static value too large, capacity exceeded", N); return False; end if; end OK_Bits; ------------------ -- Out_Of_Range -- ------------------ procedure Out_Of_Range (N : Node_Id) is begin -- If we have the static expression case, then this is an illegality -- in Ada 95 mode, except that in an instance, we never generate an -- error (if the error is legitimate, it was already diagnosed in the -- template). if Is_Static_Expression (N) and then not In_Instance and then not In_Inlined_Body and then Ada_Version >= Ada_95 then -- No message if we are statically unevaluated if Is_Statically_Unevaluated (N) then null; -- The expression to compute the length of a packed array is attached -- to the array type itself, and deserves a separate message. elsif Nkind (Parent (N)) = N_Defining_Identifier and then Is_Array_Type (Parent (N)) and then Present (Packed_Array_Impl_Type (Parent (N))) and then Present (First_Rep_Item (Parent (N))) then Error_Msg_N ("length of packed array must not exceed Integer''Last", First_Rep_Item (Parent (N))); Rewrite (N, Make_Integer_Literal (Sloc (N), Uint_1)); -- All cases except the special array case else Apply_Compile_Time_Constraint_Error (N, "value not in range of}", CE_Range_Check_Failed); end if; -- Here we generate a warning for the Ada 83 case, or when we are in an -- instance, or when we have a non-static expression case. else Apply_Compile_Time_Constraint_Error (N, "value not in range of}??", CE_Range_Check_Failed); end if; end Out_Of_Range; ---------------------- -- Predicates_Match -- ---------------------- function Predicates_Match (T1, T2 : Entity_Id) return Boolean is Pred1 : Node_Id; Pred2 : Node_Id; begin if Ada_Version < Ada_2012 then return True; -- Both types must have predicates or lack them elsif Has_Predicates (T1) /= Has_Predicates (T2) then return False; -- Check matching predicates else Pred1 := Get_Rep_Item (T1, Name_Static_Predicate, Check_Parents => False); Pred2 := Get_Rep_Item (T2, Name_Static_Predicate, Check_Parents => False); -- Subtypes statically match if the predicate comes from the -- same declaration, which can only happen if one is a subtype -- of the other and has no explicit predicate. -- Suppress warnings on order of actuals, which is otherwise -- triggered by one of the two calls below. pragma Warnings (Off); return Pred1 = Pred2 or else (No (Pred1) and then Is_Subtype_Of (T1, T2)) or else (No (Pred2) and then Is_Subtype_Of (T2, T1)); pragma Warnings (On); end if; end Predicates_Match; --------------------------------------------- -- Real_Or_String_Static_Predicate_Matches -- --------------------------------------------- function Real_Or_String_Static_Predicate_Matches (Val : Node_Id; Typ : Entity_Id) return Boolean is Expr : constant Node_Id := Static_Real_Or_String_Predicate (Typ); -- The predicate expression from the type Pfun : constant Entity_Id := Predicate_Function (Typ); -- The entity for the predicate function Ent_Name : constant Name_Id := Chars (First_Formal (Pfun)); -- The name of the formal of the predicate function. Occurrences of the -- type name in Expr have been rewritten as references to this formal, -- and it has a unique name, so we can identify references by this name. Copy : Node_Id; -- Copy of the predicate function tree function Process (N : Node_Id) return Traverse_Result; -- Function used to process nodes during the traversal in which we will -- find occurrences of the entity name, and replace such occurrences -- by a real literal with the value to be tested. procedure Traverse is new Traverse_Proc (Process); -- The actual traversal procedure ------------- -- Process -- ------------- function Process (N : Node_Id) return Traverse_Result is begin if Nkind (N) = N_Identifier and then Chars (N) = Ent_Name then declare Nod : constant Node_Id := New_Copy (Val); begin Set_Sloc (Nod, Sloc (N)); Rewrite (N, Nod); return Skip; end; -- The predicate function may contain string-comparison operations -- that have been converted into calls to run-time array-comparison -- routines. To evaluate the predicate statically, we recover the -- original comparison operation and replace the occurrence of the -- formal by the static string value. The actuals of the generated -- call are of the form X'Address. elsif Nkind (N) in N_Op_Compare and then Nkind (Left_Opnd (N)) = N_Function_Call then declare C : constant Node_Id := Left_Opnd (N); F : constant Node_Id := First (Parameter_Associations (C)); L : constant Node_Id := Prefix (F); R : constant Node_Id := Prefix (Next (F)); begin -- If an operand is an entity name, it is the formal of the -- predicate function, so replace it with the string value. -- It may be either operand in the call. The other operand -- is a static string from the original predicate. if Is_Entity_Name (L) then Rewrite (Left_Opnd (N), New_Copy (Val)); Rewrite (Right_Opnd (N), New_Copy (R)); else Rewrite (Left_Opnd (N), New_Copy (L)); Rewrite (Right_Opnd (N), New_Copy (Val)); end if; return Skip; end; else return OK; end if; end Process; -- Start of processing for Real_Or_String_Static_Predicate_Matches begin -- First deal with special case of inherited predicate, where the -- predicate expression looks like: -- xxPredicate (typ (Ent)) and then Expr -- where Expr is the predicate expression for this level, and the -- left operand is the call to evaluate the inherited predicate. if Nkind (Expr) = N_And_Then and then Nkind (Left_Opnd (Expr)) = N_Function_Call and then Is_Predicate_Function (Entity (Name (Left_Opnd (Expr)))) then -- OK we have the inherited case, so make a call to evaluate the -- inherited predicate. If that fails, so do we! if not Real_Or_String_Static_Predicate_Matches (Val => Val, Typ => Etype (First_Formal (Entity (Name (Left_Opnd (Expr)))))) then return False; end if; -- Use the right operand for the continued processing Copy := Copy_Separate_Tree (Right_Opnd (Expr)); -- Case where call to predicate function appears on its own (this means -- that the predicate at this level is just inherited from the parent). elsif Nkind (Expr) = N_Function_Call then declare Typ : constant Entity_Id := Etype (First_Formal (Entity (Name (Expr)))); begin -- If the inherited predicate is dynamic, just ignore it. We can't -- go trying to evaluate a dynamic predicate as a static one! if Has_Dynamic_Predicate_Aspect (Typ) then return True; -- Otherwise inherited predicate is static, check for match else return Real_Or_String_Static_Predicate_Matches (Val, Typ); end if; end; -- If not just an inherited predicate, copy whole expression else Copy := Copy_Separate_Tree (Expr); end if; -- Now we replace occurrences of the entity by the value Traverse (Copy); -- And analyze the resulting static expression to see if it is True Analyze_And_Resolve (Copy, Standard_Boolean); return Is_True (Expr_Value (Copy)); end Real_Or_String_Static_Predicate_Matches; ------------------------- -- Rewrite_In_Raise_CE -- ------------------------- procedure Rewrite_In_Raise_CE (N : Node_Id; Exp : Node_Id) is Typ : constant Entity_Id := Etype (N); Stat : constant Boolean := Is_Static_Expression (N); begin -- If we want to raise CE in the condition of a N_Raise_CE node, we -- can just clear the condition if the reason is appropriate. We do -- not do this operation if the parent has a reason other than range -- check failed, because otherwise we would change the reason. if Present (Parent (N)) and then Nkind (Parent (N)) = N_Raise_Constraint_Error and then Reason (Parent (N)) = UI_From_Int (RT_Exception_Code'Pos (CE_Range_Check_Failed)) then Set_Condition (Parent (N), Empty); -- Else build an explicit N_Raise_CE else Rewrite (N, Make_Raise_Constraint_Error (Sloc (Exp), Reason => CE_Range_Check_Failed)); Set_Raises_Constraint_Error (N); Set_Etype (N, Typ); end if; -- Set proper flags in result Set_Raises_Constraint_Error (N, True); Set_Is_Static_Expression (N, Stat); end Rewrite_In_Raise_CE; --------------------- -- String_Type_Len -- --------------------- function String_Type_Len (Stype : Entity_Id) return Uint is NT : constant Entity_Id := Etype (First_Index (Stype)); T : Entity_Id; begin if Is_OK_Static_Subtype (NT) then T := NT; else T := Base_Type (NT); end if; return Expr_Value (Type_High_Bound (T)) - Expr_Value (Type_Low_Bound (T)) + 1; end String_Type_Len; ------------------------------------ -- Subtypes_Statically_Compatible -- ------------------------------------ function Subtypes_Statically_Compatible (T1 : Entity_Id; T2 : Entity_Id; Formal_Derived_Matching : Boolean := False) return Boolean is begin -- Scalar types if Is_Scalar_Type (T1) then -- Definitely compatible if we match if Subtypes_Statically_Match (T1, T2) then return True; -- If either subtype is nonstatic then they're not compatible elsif not Is_OK_Static_Subtype (T1) or else not Is_OK_Static_Subtype (T2) then return False; -- Base types must match, but we don't check that (should we???) but -- we do at least check that both types are real, or both types are -- not real. elsif Is_Real_Type (T1) /= Is_Real_Type (T2) then return False; -- Here we check the bounds else declare LB1 : constant Node_Id := Type_Low_Bound (T1); HB1 : constant Node_Id := Type_High_Bound (T1); LB2 : constant Node_Id := Type_Low_Bound (T2); HB2 : constant Node_Id := Type_High_Bound (T2); begin if Is_Real_Type (T1) then return Expr_Value_R (LB1) > Expr_Value_R (HB1) or else (Expr_Value_R (LB2) <= Expr_Value_R (LB1) and then Expr_Value_R (HB1) <= Expr_Value_R (HB2)); else return Expr_Value (LB1) > Expr_Value (HB1) or else (Expr_Value (LB2) <= Expr_Value (LB1) and then Expr_Value (HB1) <= Expr_Value (HB2)); end if; end; end if; -- Access types elsif Is_Access_Type (T1) then return (not Is_Constrained (T2) or else Subtypes_Statically_Match (Designated_Type (T1), Designated_Type (T2))) and then not (Can_Never_Be_Null (T2) and then not Can_Never_Be_Null (T1)); -- All other cases else return (Is_Composite_Type (T1) and then not Is_Constrained (T2)) or else Subtypes_Statically_Match (T1, T2, Formal_Derived_Matching); end if; end Subtypes_Statically_Compatible; ------------------------------- -- Subtypes_Statically_Match -- ------------------------------- -- Subtypes statically match if they have statically matching constraints -- (RM 4.9.1(2)). Constraints statically match if there are none, or if -- they are the same identical constraint, or if they are static and the -- values match (RM 4.9.1(1)). -- In addition, in GNAT, the object size (Esize) values of the types must -- match if they are set (unless checking an actual for a formal derived -- type). The use of 'Object_Size can cause this to be false even if the -- types would otherwise match in the RM sense. function Subtypes_Statically_Match (T1 : Entity_Id; T2 : Entity_Id; Formal_Derived_Matching : Boolean := False) return Boolean is begin -- A type always statically matches itself if T1 = T2 then return True; -- No match if sizes different (from use of 'Object_Size). This test -- is excluded if Formal_Derived_Matching is True, as the base types -- can be different in that case and typically have different sizes. -- ??? Frontend_Layout_On_Target used to set Esizes but this is no -- longer the case, consider removing the last test below. elsif not Formal_Derived_Matching and then Known_Static_Esize (T1) and then Known_Static_Esize (T2) and then Esize (T1) /= Esize (T2) then return False; -- No match if predicates do not match elsif not Predicates_Match (T1, T2) then return False; -- Scalar types elsif Is_Scalar_Type (T1) then -- Base types must be the same if Base_Type (T1) /= Base_Type (T2) then return False; end if; -- A constrained numeric subtype never matches an unconstrained -- subtype, i.e. both types must be constrained or unconstrained. -- To understand the requirement for this test, see RM 4.9.1(1). -- As is made clear in RM 3.5.4(11), type Integer, for example is -- a constrained subtype with constraint bounds matching the bounds -- of its corresponding unconstrained base type. In this situation, -- Integer and Integer'Base do not statically match, even though -- they have the same bounds. -- We only apply this test to types in Standard and types that appear -- in user programs. That way, we do not have to be too careful about -- setting Is_Constrained right for Itypes. if Is_Numeric_Type (T1) and then (Is_Constrained (T1) /= Is_Constrained (T2)) and then (Scope (T1) = Standard_Standard or else Comes_From_Source (T1)) and then (Scope (T2) = Standard_Standard or else Comes_From_Source (T2)) then return False; -- A generic scalar type does not statically match its base type -- (AI-311). In this case we make sure that the formals, which are -- first subtypes of their bases, are constrained. elsif Is_Generic_Type (T1) and then Is_Generic_Type (T2) and then (Is_Constrained (T1) /= Is_Constrained (T2)) then return False; end if; -- If there was an error in either range, then just assume the types -- statically match to avoid further junk errors. if No (Scalar_Range (T1)) or else No (Scalar_Range (T2)) or else Error_Posted (Scalar_Range (T1)) or else Error_Posted (Scalar_Range (T2)) then return True; end if; -- Otherwise both types have bounds that can be compared declare LB1 : constant Node_Id := Type_Low_Bound (T1); HB1 : constant Node_Id := Type_High_Bound (T1); LB2 : constant Node_Id := Type_Low_Bound (T2); HB2 : constant Node_Id := Type_High_Bound (T2); begin -- If the bounds are the same tree node, then match (common case) if LB1 = LB2 and then HB1 = HB2 then return True; -- Otherwise bounds must be static and identical value else if not Is_OK_Static_Subtype (T1) or else not Is_OK_Static_Subtype (T2) then return False; elsif Is_Real_Type (T1) then return Expr_Value_R (LB1) = Expr_Value_R (LB2) and then Expr_Value_R (HB1) = Expr_Value_R (HB2); else return Expr_Value (LB1) = Expr_Value (LB2) and then Expr_Value (HB1) = Expr_Value (HB2); end if; end if; end; -- Type with discriminants elsif Has_Discriminants (T1) or else Has_Discriminants (T2) then -- Because of view exchanges in multiple instantiations, conformance -- checking might try to match a partial view of a type with no -- discriminants with a full view that has defaulted discriminants. -- In such a case, use the discriminant constraint of the full view, -- which must exist because we know that the two subtypes have the -- same base type. if Has_Discriminants (T1) /= Has_Discriminants (T2) then -- A generic actual type is declared through a subtype declaration -- and may have an inconsistent indication of the presence of -- discriminants, so check the type it renames. if Is_Generic_Actual_Type (T1) and then not Has_Discriminants (Etype (T1)) and then not Has_Discriminants (T2) then return True; elsif In_Instance then if Is_Private_Type (T2) and then Present (Full_View (T2)) and then Has_Discriminants (Full_View (T2)) then return Subtypes_Statically_Match (T1, Full_View (T2)); elsif Is_Private_Type (T1) and then Present (Full_View (T1)) and then Has_Discriminants (Full_View (T1)) then return Subtypes_Statically_Match (Full_View (T1), T2); else return False; end if; else return False; end if; end if; declare DL1 : constant Elist_Id := Discriminant_Constraint (T1); DL2 : constant Elist_Id := Discriminant_Constraint (T2); DA1 : Elmt_Id; DA2 : Elmt_Id; begin if DL1 = DL2 then return True; elsif Is_Constrained (T1) /= Is_Constrained (T2) then return False; end if; -- Now loop through the discriminant constraints -- Note: the guard here seems necessary, since it is possible at -- least for DL1 to be No_Elist. Not clear this is reasonable ??? if Present (DL1) and then Present (DL2) then DA1 := First_Elmt (DL1); DA2 := First_Elmt (DL2); while Present (DA1) loop declare Expr1 : constant Node_Id := Node (DA1); Expr2 : constant Node_Id := Node (DA2); begin if not Is_OK_Static_Expression (Expr1) or else not Is_OK_Static_Expression (Expr2) then return False; -- If either expression raised a constraint error, -- consider the expressions as matching, since this -- helps to prevent cascading errors. elsif Raises_Constraint_Error (Expr1) or else Raises_Constraint_Error (Expr2) then null; elsif Expr_Value (Expr1) /= Expr_Value (Expr2) then return False; end if; end; Next_Elmt (DA1); Next_Elmt (DA2); end loop; end if; end; return True; -- A definite type does not match an indefinite or classwide type. -- However, a generic type with unknown discriminants may be -- instantiated with a type with no discriminants, and conformance -- checking on an inherited operation may compare the actual with the -- subtype that renames it in the instance. elsif Has_Unknown_Discriminants (T1) /= Has_Unknown_Discriminants (T2) then return Is_Generic_Actual_Type (T1) or else Is_Generic_Actual_Type (T2); -- Array type elsif Is_Array_Type (T1) then -- If either subtype is unconstrained then both must be, and if both -- are unconstrained then no further checking is needed. if not Is_Constrained (T1) or else not Is_Constrained (T2) then return not (Is_Constrained (T1) or else Is_Constrained (T2)); end if; -- Both subtypes are constrained, so check that the index subtypes -- statically match. declare Index1 : Node_Id := First_Index (T1); Index2 : Node_Id := First_Index (T2); begin while Present (Index1) loop if not Subtypes_Statically_Match (Etype (Index1), Etype (Index2)) then return False; end if; Next_Index (Index1); Next_Index (Index2); end loop; return True; end; elsif Is_Access_Type (T1) then if Can_Never_Be_Null (T1) /= Can_Never_Be_Null (T2) then return False; elsif Ekind_In (T1, E_Access_Subprogram_Type, E_Anonymous_Access_Subprogram_Type) then return Subtype_Conformant (Designated_Type (T1), Designated_Type (T2)); else return Subtypes_Statically_Match (Designated_Type (T1), Designated_Type (T2)) and then Is_Access_Constant (T1) = Is_Access_Constant (T2); end if; -- All other types definitely match else return True; end if; end Subtypes_Statically_Match; ---------- -- Test -- ---------- function Test (Cond : Boolean) return Uint is begin if Cond then return Uint_1; else return Uint_0; end if; end Test; --------------------- -- Test_Comparison -- --------------------- procedure Test_Comparison (Op : Node_Id; Assume_Valid : Boolean; True_Result : out Boolean; False_Result : out Boolean) is Left : constant Node_Id := Left_Opnd (Op); Left_Typ : constant Entity_Id := Etype (Left); Orig_Op : constant Node_Id := Original_Node (Op); procedure Replacement_Warning (Msg : String); -- Emit a warning on a comparison that can be replaced by '=' ------------------------- -- Replacement_Warning -- ------------------------- procedure Replacement_Warning (Msg : String) is begin if Constant_Condition_Warnings and then Comes_From_Source (Orig_Op) and then Is_Integer_Type (Left_Typ) and then not Error_Posted (Op) and then not Has_Warnings_Off (Left_Typ) and then not In_Instance then Error_Msg_N (Msg, Op); end if; end Replacement_Warning; -- Local variables Res : constant Compare_Result := Compile_Time_Compare (Left, Right_Opnd (Op), Assume_Valid); -- Start of processing for Test_Comparison begin case N_Op_Compare (Nkind (Op)) is when N_Op_Eq => True_Result := Res = EQ; False_Result := Res = LT or else Res = GT or else Res = NE; when N_Op_Ge => True_Result := Res in Compare_GE; False_Result := Res = LT; if Res = LE and then Nkind (Orig_Op) = N_Op_Ge then Replacement_Warning ("can never be greater than, could replace by ""'=""?c?"); end if; when N_Op_Gt => True_Result := Res = GT; False_Result := Res in Compare_LE; when N_Op_Le => True_Result := Res in Compare_LE; False_Result := Res = GT; if Res = GE and then Nkind (Orig_Op) = N_Op_Le then Replacement_Warning ("can never be less than, could replace by ""'=""?c?"); end if; when N_Op_Lt => True_Result := Res = LT; False_Result := Res in Compare_GE; when N_Op_Ne => True_Result := Res = NE or else Res = GT or else Res = LT; False_Result := Res = EQ; end case; end Test_Comparison; --------------------------------- -- Test_Expression_Is_Foldable -- --------------------------------- -- One operand case procedure Test_Expression_Is_Foldable (N : Node_Id; Op1 : Node_Id; Stat : out Boolean; Fold : out Boolean) is begin Stat := False; Fold := False; if Debug_Flag_Dot_F and then In_Extended_Main_Source_Unit (N) then return; end if; -- If operand is Any_Type, just propagate to result and do not -- try to fold, this prevents cascaded errors. if Etype (Op1) = Any_Type then Set_Etype (N, Any_Type); return; -- If operand raises constraint error, then replace node N with the -- raise constraint error node, and we are obviously not foldable. -- Note that this replacement inherits the Is_Static_Expression flag -- from the operand. elsif Raises_Constraint_Error (Op1) then Rewrite_In_Raise_CE (N, Op1); return; -- If the operand is not static, then the result is not static, and -- all we have to do is to check the operand since it is now known -- to appear in a non-static context. elsif not Is_Static_Expression (Op1) then Check_Non_Static_Context (Op1); Fold := Compile_Time_Known_Value (Op1); return; -- An expression of a formal modular type is not foldable because -- the modulus is unknown. elsif Is_Modular_Integer_Type (Etype (Op1)) and then Is_Generic_Type (Etype (Op1)) then Check_Non_Static_Context (Op1); return; -- Here we have the case of an operand whose type is OK, which is -- static, and which does not raise constraint error, we can fold. else Set_Is_Static_Expression (N); Fold := True; Stat := True; end if; end Test_Expression_Is_Foldable; -- Two operand case procedure Test_Expression_Is_Foldable (N : Node_Id; Op1 : Node_Id; Op2 : Node_Id; Stat : out Boolean; Fold : out Boolean; CRT_Safe : Boolean := False) is Rstat : constant Boolean := Is_Static_Expression (Op1) and then Is_Static_Expression (Op2); begin Stat := False; Fold := False; -- Inhibit folding if -gnatd.f flag set if Debug_Flag_Dot_F and then In_Extended_Main_Source_Unit (N) then return; end if; -- If either operand is Any_Type, just propagate to result and -- do not try to fold, this prevents cascaded errors. if Etype (Op1) = Any_Type or else Etype (Op2) = Any_Type then Set_Etype (N, Any_Type); return; -- If left operand raises constraint error, then replace node N with the -- Raise_Constraint_Error node, and we are obviously not foldable. -- Is_Static_Expression is set from the two operands in the normal way, -- and we check the right operand if it is in a non-static context. elsif Raises_Constraint_Error (Op1) then if not Rstat then Check_Non_Static_Context (Op2); end if; Rewrite_In_Raise_CE (N, Op1); Set_Is_Static_Expression (N, Rstat); return; -- Similar processing for the case of the right operand. Note that we -- don't use this routine for the short-circuit case, so we do not have -- to worry about that special case here. elsif Raises_Constraint_Error (Op2) then if not Rstat then Check_Non_Static_Context (Op1); end if; Rewrite_In_Raise_CE (N, Op2); Set_Is_Static_Expression (N, Rstat); return; -- Exclude expressions of a generic modular type, as above elsif Is_Modular_Integer_Type (Etype (Op1)) and then Is_Generic_Type (Etype (Op1)) then Check_Non_Static_Context (Op1); return; -- If result is not static, then check non-static contexts on operands -- since one of them may be static and the other one may not be static. elsif not Rstat then Check_Non_Static_Context (Op1); Check_Non_Static_Context (Op2); if CRT_Safe then Fold := CRT_Safe_Compile_Time_Known_Value (Op1) and then CRT_Safe_Compile_Time_Known_Value (Op2); else Fold := Compile_Time_Known_Value (Op1) and then Compile_Time_Known_Value (Op2); end if; return; -- Else result is static and foldable. Both operands are static, and -- neither raises constraint error, so we can definitely fold. else Set_Is_Static_Expression (N); Fold := True; Stat := True; return; end if; end Test_Expression_Is_Foldable; ------------------- -- Test_In_Range -- ------------------- function Test_In_Range (N : Node_Id; Typ : Entity_Id; Assume_Valid : Boolean; Fixed_Int : Boolean; Int_Real : Boolean) return Range_Membership is Val : Uint; Valr : Ureal; pragma Warnings (Off, Assume_Valid); -- For now Assume_Valid is unreferenced since the current implementation -- always returns Unknown if N is not a compile time known value, but we -- keep the parameter to allow for future enhancements in which we try -- to get the information in the variable case as well. begin -- If an error was posted on expression, then return Unknown, we do not -- want cascaded errors based on some false analysis of a junk node. if Error_Posted (N) then return Unknown; -- Expression that raises constraint error is an odd case. We certainly -- do not want to consider it to be in range. It might make sense to -- consider it always out of range, but this causes incorrect error -- messages about static expressions out of range. So we just return -- Unknown, which is always safe. elsif Raises_Constraint_Error (N) then return Unknown; -- Universal types have no range limits, so always in range elsif Typ = Universal_Integer or else Typ = Universal_Real then return In_Range; -- Never known if not scalar type. Don't know if this can actually -- happen, but our spec allows it, so we must check. elsif not Is_Scalar_Type (Typ) then return Unknown; -- Never known if this is a generic type, since the bounds of generic -- types are junk. Note that if we only checked for static expressions -- (instead of compile time known values) below, we would not need this -- check, because values of a generic type can never be static, but they -- can be known at compile time. elsif Is_Generic_Type (Typ) then return Unknown; -- Case of a known compile time value, where we can check if it is in -- the bounds of the given type. elsif Compile_Time_Known_Value (N) then declare Lo : Node_Id; Hi : Node_Id; LB_Known : Boolean; HB_Known : Boolean; begin Lo := Type_Low_Bound (Typ); Hi := Type_High_Bound (Typ); LB_Known := Compile_Time_Known_Value (Lo); HB_Known := Compile_Time_Known_Value (Hi); -- Fixed point types should be considered as such only if flag -- Fixed_Int is set to False. if Is_Floating_Point_Type (Typ) or else (Is_Fixed_Point_Type (Typ) and then not Fixed_Int) or else Int_Real then Valr := Expr_Value_R (N); if LB_Known and HB_Known then if Valr >= Expr_Value_R (Lo) and then Valr <= Expr_Value_R (Hi) then return In_Range; else return Out_Of_Range; end if; elsif (LB_Known and then Valr < Expr_Value_R (Lo)) or else (HB_Known and then Valr > Expr_Value_R (Hi)) then return Out_Of_Range; else return Unknown; end if; else Val := Expr_Value (N); if LB_Known and HB_Known then if Val >= Expr_Value (Lo) and then Val <= Expr_Value (Hi) then return In_Range; else return Out_Of_Range; end if; elsif (LB_Known and then Val < Expr_Value (Lo)) or else (HB_Known and then Val > Expr_Value (Hi)) then return Out_Of_Range; else return Unknown; end if; end if; end; -- Here for value not known at compile time. Case of expression subtype -- is Typ or is a subtype of Typ, and we can assume expression is valid. -- In this case we know it is in range without knowing its value. elsif Assume_Valid and then (Etype (N) = Typ or else Is_Subtype_Of (Etype (N), Typ)) then return In_Range; -- Another special case. For signed integer types, if the target type -- has Is_Known_Valid set, and the source type does not have a larger -- size, then the source value must be in range. We exclude biased -- types, because they bizarrely can generate out of range values. elsif Is_Signed_Integer_Type (Etype (N)) and then Is_Known_Valid (Typ) and then Esize (Etype (N)) <= Esize (Typ) and then not Has_Biased_Representation (Etype (N)) then return In_Range; -- For all other cases, result is unknown else return Unknown; end if; end Test_In_Range; -------------- -- To_Bits -- -------------- procedure To_Bits (U : Uint; B : out Bits) is begin for J in 0 .. B'Last loop B (J) := (U / (2 ** J)) mod 2 /= 0; end loop; end To_Bits; -------------------- -- Why_Not_Static -- -------------------- procedure Why_Not_Static (Expr : Node_Id) is N : constant Node_Id := Original_Node (Expr); Typ : Entity_Id := Empty; E : Entity_Id; Alt : Node_Id; Exp : Node_Id; procedure Why_Not_Static_List (L : List_Id); -- A version that can be called on a list of expressions. Finds all -- non-static violations in any element of the list. ------------------------- -- Why_Not_Static_List -- ------------------------- procedure Why_Not_Static_List (L : List_Id) is N : Node_Id; begin if Is_Non_Empty_List (L) then N := First (L); while Present (N) loop Why_Not_Static (N); Next (N); end loop; end if; end Why_Not_Static_List; -- Start of processing for Why_Not_Static begin -- Ignore call on error or empty node if No (Expr) or else Nkind (Expr) = N_Error then return; end if; -- Preprocessing for sub expressions if Nkind (Expr) in N_Subexpr then -- Nothing to do if expression is static if Is_OK_Static_Expression (Expr) then return; end if; -- Test for constraint error raised if Raises_Constraint_Error (Expr) then -- Special case membership to find out which piece to flag if Nkind (N) in N_Membership_Test then if Raises_Constraint_Error (Left_Opnd (N)) then Why_Not_Static (Left_Opnd (N)); return; elsif Present (Right_Opnd (N)) and then Raises_Constraint_Error (Right_Opnd (N)) then Why_Not_Static (Right_Opnd (N)); return; else pragma Assert (Present (Alternatives (N))); Alt := First (Alternatives (N)); while Present (Alt) loop if Raises_Constraint_Error (Alt) then Why_Not_Static (Alt); return; else Next (Alt); end if; end loop; end if; -- Special case a range to find out which bound to flag elsif Nkind (N) = N_Range then if Raises_Constraint_Error (Low_Bound (N)) then Why_Not_Static (Low_Bound (N)); return; elsif Raises_Constraint_Error (High_Bound (N)) then Why_Not_Static (High_Bound (N)); return; end if; -- Special case attribute to see which part to flag elsif Nkind (N) = N_Attribute_Reference then if Raises_Constraint_Error (Prefix (N)) then Why_Not_Static (Prefix (N)); return; end if; if Present (Expressions (N)) then Exp := First (Expressions (N)); while Present (Exp) loop if Raises_Constraint_Error (Exp) then Why_Not_Static (Exp); return; end if; Next (Exp); end loop; end if; -- Special case a subtype name elsif Is_Entity_Name (Expr) and then Is_Type (Entity (Expr)) then Error_Msg_NE ("!& is not a static subtype (RM 4.9(26))", N, Entity (Expr)); return; end if; -- End of special cases Error_Msg_N ("!expression raises exception, cannot be static (RM 4.9(34))", N); return; end if; -- If no type, then something is pretty wrong, so ignore Typ := Etype (Expr); if No (Typ) then return; end if; -- Type must be scalar or string type (but allow Bignum, since this -- is really a scalar type from our point of view in this diagnosis). if not Is_Scalar_Type (Typ) and then not Is_String_Type (Typ) and then not Is_RTE (Typ, RE_Bignum) then Error_Msg_N ("!static expression must have scalar or string type " & "(RM 4.9(2))", N); return; end if; end if; -- If we got through those checks, test particular node kind case Nkind (N) is -- Entity name when N_Expanded_Name | N_Identifier | N_Operator_Symbol => E := Entity (N); if Is_Named_Number (E) then null; elsif Ekind (E) = E_Constant then -- One case we can give a metter message is when we have a -- string literal created by concatenating an aggregate with -- an others expression. Entity_Case : declare CV : constant Node_Id := Constant_Value (E); CO : constant Node_Id := Original_Node (CV); function Is_Aggregate (N : Node_Id) return Boolean; -- See if node N came from an others aggregate, if so -- return True and set Error_Msg_Sloc to aggregate. ------------------ -- Is_Aggregate -- ------------------ function Is_Aggregate (N : Node_Id) return Boolean is begin if Nkind (Original_Node (N)) = N_Aggregate then Error_Msg_Sloc := Sloc (Original_Node (N)); return True; elsif Is_Entity_Name (N) and then Ekind (Entity (N)) = E_Constant and then Nkind (Original_Node (Constant_Value (Entity (N)))) = N_Aggregate then Error_Msg_Sloc := Sloc (Original_Node (Constant_Value (Entity (N)))); return True; else return False; end if; end Is_Aggregate; -- Start of processing for Entity_Case begin if Is_Aggregate (CV) or else (Nkind (CO) = N_Op_Concat and then (Is_Aggregate (Left_Opnd (CO)) or else Is_Aggregate (Right_Opnd (CO)))) then Error_Msg_N ("!aggregate (#) is never static", N); elsif No (CV) or else not Is_Static_Expression (CV) then Error_Msg_NE ("!& is not a static constant (RM 4.9(5))", N, E); end if; end Entity_Case; elsif Is_Type (E) then Error_Msg_NE ("!& is not a static subtype (RM 4.9(26))", N, E); else Error_Msg_NE ("!& is not static constant or named number " & "(RM 4.9(5))", N, E); end if; -- Binary operator when N_Binary_Op | N_Membership_Test | N_Short_Circuit => if Nkind (N) in N_Op_Shift then Error_Msg_N ("!shift functions are never static (RM 4.9(6,18))", N); else Why_Not_Static (Left_Opnd (N)); Why_Not_Static (Right_Opnd (N)); end if; -- Unary operator when N_Unary_Op => Why_Not_Static (Right_Opnd (N)); -- Attribute reference when N_Attribute_Reference => Why_Not_Static_List (Expressions (N)); E := Etype (Prefix (N)); if E = Standard_Void_Type then return; end if; -- Special case non-scalar'Size since this is a common error if Attribute_Name (N) = Name_Size then Error_Msg_N ("!size attribute is only static for static scalar type " & "(RM 4.9(7,8))", N); -- Flag array cases elsif Is_Array_Type (E) then if not Nam_In (Attribute_Name (N), Name_First, Name_Last, Name_Length) then Error_Msg_N ("!static array attribute must be Length, First, or Last " & "(RM 4.9(8))", N); -- Since we know the expression is not-static (we already -- tested for this, must mean array is not static). else Error_Msg_N ("!prefix is non-static array (RM 4.9(8))", Prefix (N)); end if; return; -- Special case generic types, since again this is a common source -- of confusion. elsif Is_Generic_Actual_Type (E) or else Is_Generic_Type (E) then Error_Msg_N ("!attribute of generic type is never static " & "(RM 4.9(7,8))", N); elsif Is_OK_Static_Subtype (E) then null; elsif Is_Scalar_Type (E) then Error_Msg_N ("!prefix type for attribute is not static scalar subtype " & "(RM 4.9(7))", N); else Error_Msg_N ("!static attribute must apply to array/scalar type " & "(RM 4.9(7,8))", N); end if; -- String literal when N_String_Literal => Error_Msg_N ("!subtype of string literal is non-static (RM 4.9(4))", N); -- Explicit dereference when N_Explicit_Dereference => Error_Msg_N ("!explicit dereference is never static (RM 4.9)", N); -- Function call when N_Function_Call => Why_Not_Static_List (Parameter_Associations (N)); -- Complain about non-static function call unless we have Bignum -- which means that the underlying expression is really some -- scalar arithmetic operation. if not Is_RTE (Typ, RE_Bignum) then Error_Msg_N ("!non-static function call (RM 4.9(6,18))", N); end if; -- Parameter assocation (test actual parameter) when N_Parameter_Association => Why_Not_Static (Explicit_Actual_Parameter (N)); -- Indexed component when N_Indexed_Component => Error_Msg_N ("!indexed component is never static (RM 4.9)", N); -- Procedure call when N_Procedure_Call_Statement => Error_Msg_N ("!procedure call is never static (RM 4.9)", N); -- Qualified expression (test expression) when N_Qualified_Expression => Why_Not_Static (Expression (N)); -- Aggregate when N_Aggregate | N_Extension_Aggregate => Error_Msg_N ("!an aggregate is never static (RM 4.9)", N); -- Range when N_Range => Why_Not_Static (Low_Bound (N)); Why_Not_Static (High_Bound (N)); -- Range constraint, test range expression when N_Range_Constraint => Why_Not_Static (Range_Expression (N)); -- Subtype indication, test constraint when N_Subtype_Indication => Why_Not_Static (Constraint (N)); -- Selected component when N_Selected_Component => Error_Msg_N ("!selected component is never static (RM 4.9)", N); -- Slice when N_Slice => Error_Msg_N ("!slice is never static (RM 4.9)", N); when N_Type_Conversion => Why_Not_Static (Expression (N)); if not Is_Scalar_Type (Entity (Subtype_Mark (N))) or else not Is_OK_Static_Subtype (Entity (Subtype_Mark (N))) then Error_Msg_N ("!static conversion requires static scalar subtype result " & "(RM 4.9(9))", N); end if; -- Unchecked type conversion when N_Unchecked_Type_Conversion => Error_Msg_N ("!unchecked type conversion is never static (RM 4.9)", N); -- All other cases, no reason to give when others => null; end case; end Why_Not_Static; end Sem_Eval;