------------------------------------------------------------------------------ -- -- -- GNAT COMPILER COMPONENTS -- -- -- -- S E M _ C H 5 -- -- -- -- B o d y -- -- -- -- Copyright (C) 1992-2018, Free Software Foundation, Inc. -- -- -- -- GNAT is free software; you can redistribute it and/or modify it under -- -- terms of the GNU General Public License as published by the Free Soft- -- -- ware Foundation; either version 3, or (at your option) any later ver- -- -- sion. GNAT is distributed in the hope that it will be useful, but WITH- -- -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -- -- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -- -- for more details. You should have received a copy of the GNU General -- -- Public License distributed with GNAT; see file COPYING3. If not, go to -- -- http://www.gnu.org/licenses for a complete copy of the license. -- -- -- -- GNAT was originally developed by the GNAT team at New York University. -- -- Extensive contributions were provided by Ada Core Technologies Inc. -- -- -- ------------------------------------------------------------------------------ with Aspects; use Aspects; with Atree; use Atree; with Checks; use Checks; with Einfo; use Einfo; with Errout; use Errout; with Expander; use Expander; with Exp_Ch6; use Exp_Ch6; with Exp_Util; use Exp_Util; with Freeze; use Freeze; with Ghost; use Ghost; with Lib; use Lib; with Lib.Xref; use Lib.Xref; with Namet; use Namet; with Nlists; use Nlists; with Nmake; use Nmake; with Opt; use Opt; with Restrict; use Restrict; with Rident; use Rident; with Sem; use Sem; with Sem_Aux; use Sem_Aux; with Sem_Case; use Sem_Case; with Sem_Ch3; use Sem_Ch3; with Sem_Ch6; use Sem_Ch6; with Sem_Ch8; use Sem_Ch8; with Sem_Dim; use Sem_Dim; with Sem_Disp; use Sem_Disp; with Sem_Elab; use Sem_Elab; with Sem_Eval; use Sem_Eval; with Sem_Res; use Sem_Res; with Sem_Type; use Sem_Type; with Sem_Util; use Sem_Util; with Sem_Warn; use Sem_Warn; with Snames; use Snames; with Stand; use Stand; with Sinfo; use Sinfo; with Targparm; use Targparm; with Tbuild; use Tbuild; with Uintp; use Uintp; package body Sem_Ch5 is Current_Assignment : Node_Id := Empty; -- This variable holds the node for an assignment that contains target -- names. The corresponding flag has been set by the parser, and when -- set the analysis of the RHS must be done with all expansion disabled, -- because the assignment is reanalyzed after expansion has replaced all -- occurrences of the target name appropriately. Unblocked_Exit_Count : Nat := 0; -- This variable is used when processing if statements, case statements, -- and block statements. It counts the number of exit points that are not -- blocked by unconditional transfer instructions: for IF and CASE, these -- are the branches of the conditional; for a block, they are the statement -- sequence of the block, and the statement sequences of any exception -- handlers that are part of the block. When processing is complete, if -- this count is zero, it means that control cannot fall through the IF, -- CASE or block statement. This is used for the generation of warning -- messages. This variable is recursively saved on entry to processing the -- construct, and restored on exit. procedure Preanalyze_Range (R_Copy : Node_Id); -- Determine expected type of range or domain of iteration of Ada 2012 -- loop by analyzing separate copy. Do the analysis and resolution of the -- copy of the bound(s) with expansion disabled, to prevent the generation -- of finalization actions. This prevents memory leaks when the bounds -- contain calls to functions returning controlled arrays or when the -- domain of iteration is a container. ------------------------ -- Analyze_Assignment -- ------------------------ -- WARNING: This routine manages Ghost regions. Return statements must be -- replaced by gotos which jump to the end of the routine and restore the -- Ghost mode. procedure Analyze_Assignment (N : Node_Id) is Lhs : constant Node_Id := Name (N); Rhs : Node_Id := Expression (N); procedure Diagnose_Non_Variable_Lhs (N : Node_Id); -- N is the node for the left hand side of an assignment, and it is not -- a variable. This routine issues an appropriate diagnostic. function Is_Protected_Part_Of_Constituent (Nod : Node_Id) return Boolean; -- Determine whether arbitrary node Nod denotes a Part_Of constituent of -- a single protected type. procedure Kill_Lhs; -- This is called to kill current value settings of a simple variable -- on the left hand side. We call it if we find any error in analyzing -- the assignment, and at the end of processing before setting any new -- current values in place. procedure Set_Assignment_Type (Opnd : Node_Id; Opnd_Type : in out Entity_Id); -- Opnd is either the Lhs or Rhs of the assignment, and Opnd_Type is the -- nominal subtype. This procedure is used to deal with cases where the -- nominal subtype must be replaced by the actual subtype. procedure Transform_BIP_Assignment (Typ : Entity_Id); function Should_Transform_BIP_Assignment (Typ : Entity_Id) return Boolean; -- If the right-hand side of an assignment statement is a build-in-place -- call we cannot build in place, so we insert a temp initialized with -- the call, and transform the assignment statement to copy the temp. -- Transform_BIP_Assignment does the tranformation, and -- Should_Transform_BIP_Assignment determines whether we should. -- The same goes for qualified expressions and conversions whose -- operand is such a call. -- -- This is only for nonlimited types; assignment statements are illegal -- for limited types, but are generated internally for aggregates and -- init procs. These limited-type are not really assignment statements -- -- conceptually, they are initializations, so should not be -- transformed. -- -- Similarly, for nonlimited types, aggregates and init procs generate -- assignment statements that are really initializations. These are -- marked No_Ctrl_Actions. function Within_Function return Boolean; -- Determine whether the current scope is a function or appears within -- one. ------------------------------- -- Diagnose_Non_Variable_Lhs -- ------------------------------- procedure Diagnose_Non_Variable_Lhs (N : Node_Id) is begin -- Not worth posting another error if left hand side already flagged -- as being illegal in some respect. if Error_Posted (N) then return; -- Some special bad cases of entity names elsif Is_Entity_Name (N) then declare Ent : constant Entity_Id := Entity (N); begin if Ekind (Ent) = E_In_Parameter then Error_Msg_N ("assignment to IN mode parameter not allowed", N); return; -- Renamings of protected private components are turned into -- constants when compiling a protected function. In the case -- of single protected types, the private component appears -- directly. elsif (Is_Prival (Ent) and then Within_Function) or else (Ekind (Ent) = E_Component and then Is_Protected_Type (Scope (Ent))) then Error_Msg_N ("protected function cannot modify protected object", N); return; elsif Ekind (Ent) = E_Loop_Parameter then Error_Msg_N ("assignment to loop parameter not allowed", N); return; end if; end; -- For indexed components, test prefix if it is in array. We do not -- want to recurse for cases where the prefix is a pointer, since we -- may get a message confusing the pointer and what it references. elsif Nkind (N) = N_Indexed_Component and then Is_Array_Type (Etype (Prefix (N))) then Diagnose_Non_Variable_Lhs (Prefix (N)); return; -- Another special case for assignment to discriminant elsif Nkind (N) = N_Selected_Component then if Present (Entity (Selector_Name (N))) and then Ekind (Entity (Selector_Name (N))) = E_Discriminant then Error_Msg_N ("assignment to discriminant not allowed", N); return; -- For selection from record, diagnose prefix, but note that again -- we only do this for a record, not e.g. for a pointer. elsif Is_Record_Type (Etype (Prefix (N))) then Diagnose_Non_Variable_Lhs (Prefix (N)); return; end if; end if; -- If we fall through, we have no special message to issue Error_Msg_N ("left hand side of assignment must be a variable", N); end Diagnose_Non_Variable_Lhs; -------------------------------------- -- Is_Protected_Part_Of_Constituent -- -------------------------------------- function Is_Protected_Part_Of_Constituent (Nod : Node_Id) return Boolean is Encap_Id : Entity_Id; Var_Id : Entity_Id; begin -- Abstract states and variables may act as Part_Of constituents of -- single protected types, however only variables can be modified by -- an assignment. if Is_Entity_Name (Nod) then Var_Id := Entity (Nod); if Present (Var_Id) and then Ekind (Var_Id) = E_Variable then Encap_Id := Encapsulating_State (Var_Id); -- To qualify, the node must denote a reference to a variable -- whose encapsulating state is a single protected object. return Present (Encap_Id) and then Is_Single_Protected_Object (Encap_Id); end if; end if; return False; end Is_Protected_Part_Of_Constituent; -------------- -- Kill_Lhs -- -------------- procedure Kill_Lhs is begin if Is_Entity_Name (Lhs) then declare Ent : constant Entity_Id := Entity (Lhs); begin if Present (Ent) then Kill_Current_Values (Ent); end if; end; end if; end Kill_Lhs; ------------------------- -- Set_Assignment_Type -- ------------------------- procedure Set_Assignment_Type (Opnd : Node_Id; Opnd_Type : in out Entity_Id) is Decl : Node_Id; begin Require_Entity (Opnd); -- If the assignment operand is an in-out or out parameter, then we -- get the actual subtype (needed for the unconstrained case). If the -- operand is the actual in an entry declaration, then within the -- accept statement it is replaced with a local renaming, which may -- also have an actual subtype. if Is_Entity_Name (Opnd) and then (Ekind (Entity (Opnd)) = E_Out_Parameter or else Ekind_In (Entity (Opnd), E_In_Out_Parameter, E_Generic_In_Out_Parameter) or else (Ekind (Entity (Opnd)) = E_Variable and then Nkind (Parent (Entity (Opnd))) = N_Object_Renaming_Declaration and then Nkind (Parent (Parent (Entity (Opnd)))) = N_Accept_Statement)) then Opnd_Type := Get_Actual_Subtype (Opnd); -- If assignment operand is a component reference, then we get the -- actual subtype of the component for the unconstrained case. elsif Nkind_In (Opnd, N_Selected_Component, N_Explicit_Dereference) and then not Is_Unchecked_Union (Opnd_Type) then Decl := Build_Actual_Subtype_Of_Component (Opnd_Type, Opnd); if Present (Decl) then Insert_Action (N, Decl); Mark_Rewrite_Insertion (Decl); Analyze (Decl); Opnd_Type := Defining_Identifier (Decl); Set_Etype (Opnd, Opnd_Type); Freeze_Itype (Opnd_Type, N); elsif Is_Constrained (Etype (Opnd)) then Opnd_Type := Etype (Opnd); end if; -- For slice, use the constrained subtype created for the slice elsif Nkind (Opnd) = N_Slice then Opnd_Type := Etype (Opnd); end if; end Set_Assignment_Type; ------------------------------------- -- Should_Transform_BIP_Assignment -- ------------------------------------- function Should_Transform_BIP_Assignment (Typ : Entity_Id) return Boolean is Result : Boolean; begin if Expander_Active and then not Is_Limited_View (Typ) and then Is_Build_In_Place_Result_Type (Typ) and then not No_Ctrl_Actions (N) then -- This function is called early, before name resolution is -- complete, so we have to deal with things that might turn into -- function calls later. N_Function_Call and N_Op nodes are the -- obvious case. An N_Identifier or N_Expanded_Name is a -- parameterless function call if it denotes a function. -- Finally, an attribute reference can be a function call. case Nkind (Unqual_Conv (Rhs)) is when N_Function_Call | N_Op => Result := True; when N_Expanded_Name | N_Identifier => case Ekind (Entity (Unqual_Conv (Rhs))) is when E_Function | E_Operator => Result := True; when others => Result := False; end case; when N_Attribute_Reference => Result := Attribute_Name (Unqual_Conv (Rhs)) = Name_Input; -- T'Input will turn into a call whose result type is T when others => Result := False; end case; else Result := False; end if; return Result; end Should_Transform_BIP_Assignment; ------------------------------ -- Transform_BIP_Assignment -- ------------------------------ procedure Transform_BIP_Assignment (Typ : Entity_Id) is -- Tranform "X : [constant] T := F (...);" into: -- -- Temp : constant T := F (...); -- X := Temp; Loc : constant Source_Ptr := Sloc (N); Def_Id : constant Entity_Id := Make_Temporary (Loc, 'Y', Rhs); Obj_Decl : constant Node_Id := Make_Object_Declaration (Loc, Defining_Identifier => Def_Id, Constant_Present => True, Object_Definition => New_Occurrence_Of (Typ, Loc), Expression => Rhs, Has_Init_Expression => True); begin Set_Etype (Def_Id, Typ); Set_Expression (N, New_Occurrence_Of (Def_Id, Loc)); -- At this point, Rhs is no longer equal to Expression (N), so: Rhs := Expression (N); Insert_Action (N, Obj_Decl); end Transform_BIP_Assignment; --------------------- -- Within_Function -- --------------------- function Within_Function return Boolean is Scop_Id : constant Entity_Id := Current_Scope; begin if Ekind (Scop_Id) = E_Function then return True; elsif Ekind (Enclosing_Dynamic_Scope (Scop_Id)) = E_Function then return True; end if; return False; end Within_Function; -- Local variables T1 : Entity_Id; T2 : Entity_Id; Save_Full_Analysis : Boolean := False; -- Force initialization to facilitate static analysis Saved_GM : constant Ghost_Mode_Type := Ghost_Mode; Saved_IGR : constant Node_Id := Ignored_Ghost_Region; -- Save the Ghost-related attributes to restore on exit -- Start of processing for Analyze_Assignment begin Mark_Coextensions (N, Rhs); -- Preserve relevant elaboration-related attributes of the context which -- are no longer available or very expensive to recompute once analysis, -- resolution, and expansion are over. Mark_Elaboration_Attributes (N_Id => N, Checks => True, Modes => True); -- Analyze the target of the assignment first in case the expression -- contains references to Ghost entities. The checks that verify the -- proper use of a Ghost entity need to know the enclosing context. Analyze (Lhs); -- An assignment statement is Ghost when the left hand side denotes a -- Ghost entity. Set the mode now to ensure that any nodes generated -- during analysis and expansion are properly marked as Ghost. if Has_Target_Names (N) then Current_Assignment := N; Expander_Mode_Save_And_Set (False); Save_Full_Analysis := Full_Analysis; Full_Analysis := False; else Current_Assignment := Empty; end if; Mark_And_Set_Ghost_Assignment (N); Analyze (Rhs); -- Ensure that we never do an assignment on a variable marked as -- Is_Safe_To_Reevaluate. pragma Assert (not Is_Entity_Name (Lhs) or else Ekind (Entity (Lhs)) /= E_Variable or else not Is_Safe_To_Reevaluate (Entity (Lhs))); -- Start type analysis for assignment T1 := Etype (Lhs); -- In the most general case, both Lhs and Rhs can be overloaded, and we -- must compute the intersection of the possible types on each side. if Is_Overloaded (Lhs) then declare I : Interp_Index; It : Interp; begin T1 := Any_Type; Get_First_Interp (Lhs, I, It); while Present (It.Typ) loop -- An indexed component with generalized indexing is always -- overloaded with the corresponding dereference. Discard the -- interpretation that yields a reference type, which is not -- assignable. if Nkind (Lhs) = N_Indexed_Component and then Present (Generalized_Indexing (Lhs)) and then Has_Implicit_Dereference (It.Typ) then null; -- This may be a call to a parameterless function through an -- implicit dereference, so discard interpretation as well. elsif Is_Entity_Name (Lhs) and then Has_Implicit_Dereference (It.Typ) then null; elsif Has_Compatible_Type (Rhs, It.Typ) then if T1 = Any_Type then T1 := It.Typ; else -- An explicit dereference is overloaded if the prefix -- is. Try to remove the ambiguity on the prefix, the -- error will be posted there if the ambiguity is real. if Nkind (Lhs) = N_Explicit_Dereference then declare PI : Interp_Index; PI1 : Interp_Index := 0; PIt : Interp; Found : Boolean; begin Found := False; Get_First_Interp (Prefix (Lhs), PI, PIt); while Present (PIt.Typ) loop if Is_Access_Type (PIt.Typ) and then Has_Compatible_Type (Rhs, Designated_Type (PIt.Typ)) then if Found then PIt := Disambiguate (Prefix (Lhs), PI1, PI, Any_Type); if PIt = No_Interp then Error_Msg_N ("ambiguous left-hand side in " & "assignment", Lhs); exit; else Resolve (Prefix (Lhs), PIt.Typ); end if; exit; else Found := True; PI1 := PI; end if; end if; Get_Next_Interp (PI, PIt); end loop; end; else Error_Msg_N ("ambiguous left-hand side in assignment", Lhs); exit; end if; end if; end if; Get_Next_Interp (I, It); end loop; end; if T1 = Any_Type then Error_Msg_N ("no valid types for left-hand side for assignment", Lhs); Kill_Lhs; goto Leave; end if; end if; -- Deal with build-in-place calls for nonlimited types. We don't do this -- later, because resolving the rhs tranforms it incorrectly for build- -- in-place. if Should_Transform_BIP_Assignment (Typ => T1) then -- In certain cases involving user-defined concatenation operators, -- we need to resolve the right-hand side before transforming the -- assignment. case Nkind (Unqual_Conv (Rhs)) is when N_Function_Call => declare Actual : Node_Id := First (Parameter_Associations (Unqual_Conv (Rhs))); Actual_Exp : Node_Id; begin while Present (Actual) loop if Nkind (Actual) = N_Parameter_Association then Actual_Exp := Explicit_Actual_Parameter (Actual); else Actual_Exp := Actual; end if; if Nkind (Actual_Exp) = N_Op_Concat then Resolve (Rhs, T1); exit; end if; Next (Actual); end loop; end; when N_Attribute_Reference | N_Expanded_Name | N_Identifier | N_Op => null; when others => raise Program_Error; end case; Transform_BIP_Assignment (Typ => T1); end if; pragma Assert (not Should_Transform_BIP_Assignment (Typ => T1)); -- The resulting assignment type is T1, so now we will resolve the left -- hand side of the assignment using this determined type. Resolve (Lhs, T1); -- Cases where Lhs is not a variable. In an instance or an inlined body -- no need for further check because assignment was legal in template. if In_Inlined_Body then null; elsif not Is_Variable (Lhs) then -- Ada 2005 (AI-327): Check assignment to the attribute Priority of a -- protected object. declare Ent : Entity_Id; S : Entity_Id; begin if Ada_Version >= Ada_2005 then -- Handle chains of renamings Ent := Lhs; while Nkind (Ent) in N_Has_Entity and then Present (Entity (Ent)) and then Present (Renamed_Object (Entity (Ent))) loop Ent := Renamed_Object (Entity (Ent)); end loop; if (Nkind (Ent) = N_Attribute_Reference and then Attribute_Name (Ent) = Name_Priority) -- Renamings of the attribute Priority applied to protected -- objects have been previously expanded into calls to the -- Get_Ceiling run-time subprogram. or else Is_Expanded_Priority_Attribute (Ent) then -- The enclosing subprogram cannot be a protected function S := Current_Scope; while not (Is_Subprogram (S) and then Convention (S) = Convention_Protected) and then S /= Standard_Standard loop S := Scope (S); end loop; if Ekind (S) = E_Function and then Convention (S) = Convention_Protected then Error_Msg_N ("protected function cannot modify protected object", Lhs); end if; -- Changes of the ceiling priority of the protected object -- are only effective if the Ceiling_Locking policy is in -- effect (AARM D.5.2 (5/2)). if Locking_Policy /= 'C' then Error_Msg_N ("assignment to the attribute PRIORITY has no effect??", Lhs); Error_Msg_N ("\since no Locking_Policy has been specified??", Lhs); end if; goto Leave; end if; end if; end; Diagnose_Non_Variable_Lhs (Lhs); goto Leave; -- Error of assigning to limited type. We do however allow this in -- certain cases where the front end generates the assignments. elsif Is_Limited_Type (T1) and then not Assignment_OK (Lhs) and then not Assignment_OK (Original_Node (Lhs)) then -- CPP constructors can only be called in declarations if Is_CPP_Constructor_Call (Rhs) then Error_Msg_N ("invalid use of 'C'P'P constructor", Rhs); else Error_Msg_N ("left hand of assignment must not be limited type", Lhs); Explain_Limited_Type (T1, Lhs); end if; goto Leave; -- A class-wide type may be a limited view. This illegal case is not -- caught by previous checks. elsif Ekind (T1) = E_Class_Wide_Type and then From_Limited_With (T1) then Error_Msg_NE ("invalid use of limited view of&", Lhs, T1); goto Leave; -- Enforce RM 3.9.3 (8): the target of an assignment operation cannot be -- abstract. This is only checked when the assignment Comes_From_Source, -- because in some cases the expander generates such assignments (such -- in the _assign operation for an abstract type). elsif Is_Abstract_Type (T1) and then Comes_From_Source (N) then Error_Msg_N ("target of assignment operation must not be abstract", Lhs); end if; -- Variables which are Part_Of constituents of single protected types -- behave in similar fashion to protected components. Such variables -- cannot be modified by protected functions. if Is_Protected_Part_Of_Constituent (Lhs) and then Within_Function then Error_Msg_N ("protected function cannot modify protected object", Lhs); end if; -- Resolution may have updated the subtype, in case the left-hand side -- is a private protected component. Use the correct subtype to avoid -- scoping issues in the back-end. T1 := Etype (Lhs); -- Ada 2005 (AI-50217, AI-326): Check wrong dereference of incomplete -- type. For example: -- limited with P; -- package Pkg is -- type Acc is access P.T; -- end Pkg; -- with Pkg; use Acc; -- procedure Example is -- A, B : Acc; -- begin -- A.all := B.all; -- ERROR -- end Example; if Nkind (Lhs) = N_Explicit_Dereference and then Ekind (T1) = E_Incomplete_Type then Error_Msg_N ("invalid use of incomplete type", Lhs); Kill_Lhs; goto Leave; end if; -- Now we can complete the resolution of the right hand side Set_Assignment_Type (Lhs, T1); -- If the target of the assignment is an entity of a mutable type and -- the expression is a conditional expression, its alternatives can be -- of different subtypes of the nominal type of the LHS, so they must be -- resolved with the base type, given that their subtype may differ from -- that of the target mutable object. if Is_Entity_Name (Lhs) and then Ekind_In (Entity (Lhs), E_In_Out_Parameter, E_Out_Parameter, E_Variable) and then Is_Composite_Type (T1) and then not Is_Constrained (Etype (Entity (Lhs))) and then Nkind_In (Rhs, N_If_Expression, N_Case_Expression) then Resolve (Rhs, Base_Type (T1)); else Resolve (Rhs, T1); end if; -- This is the point at which we check for an unset reference Check_Unset_Reference (Rhs); Check_Unprotected_Access (Lhs, Rhs); -- Remaining steps are skipped if Rhs was syntactically in error if Rhs = Error then Kill_Lhs; goto Leave; end if; T2 := Etype (Rhs); if not Covers (T1, T2) then Wrong_Type (Rhs, Etype (Lhs)); Kill_Lhs; goto Leave; end if; -- Ada 2005 (AI-326): In case of explicit dereference of incomplete -- types, use the non-limited view if available if Nkind (Rhs) = N_Explicit_Dereference and then Is_Tagged_Type (T2) and then Has_Non_Limited_View (T2) then T2 := Non_Limited_View (T2); end if; Set_Assignment_Type (Rhs, T2); if Total_Errors_Detected /= 0 then if No (T1) then T1 := Any_Type; end if; if No (T2) then T2 := Any_Type; end if; end if; if T1 = Any_Type or else T2 = Any_Type then Kill_Lhs; goto Leave; end if; -- If the rhs is class-wide or dynamically tagged, then require the lhs -- to be class-wide. The case where the rhs is a dynamically tagged call -- to a dispatching operation with a controlling access result is -- excluded from this check, since the target has an access type (and -- no tag propagation occurs in that case). if (Is_Class_Wide_Type (T2) or else (Is_Dynamically_Tagged (Rhs) and then not Is_Access_Type (T1))) and then not Is_Class_Wide_Type (T1) then Error_Msg_N ("dynamically tagged expression not allowed!", Rhs); elsif Is_Class_Wide_Type (T1) and then not Is_Class_Wide_Type (T2) and then not Is_Tag_Indeterminate (Rhs) and then not Is_Dynamically_Tagged (Rhs) then Error_Msg_N ("dynamically tagged expression required!", Rhs); end if; -- Propagate the tag from a class-wide target to the rhs when the rhs -- is a tag-indeterminate call. if Is_Tag_Indeterminate (Rhs) then if Is_Class_Wide_Type (T1) then Propagate_Tag (Lhs, Rhs); elsif Nkind (Rhs) = N_Function_Call and then Is_Entity_Name (Name (Rhs)) and then Is_Abstract_Subprogram (Entity (Name (Rhs))) then Error_Msg_N ("call to abstract function must be dispatching", Name (Rhs)); elsif Nkind (Rhs) = N_Qualified_Expression and then Nkind (Expression (Rhs)) = N_Function_Call and then Is_Entity_Name (Name (Expression (Rhs))) and then Is_Abstract_Subprogram (Entity (Name (Expression (Rhs)))) then Error_Msg_N ("call to abstract function must be dispatching", Name (Expression (Rhs))); end if; end if; -- Ada 2005 (AI-385): When the lhs type is an anonymous access type, -- apply an implicit conversion of the rhs to that type to force -- appropriate static and run-time accessibility checks. This applies -- as well to anonymous access-to-subprogram types that are component -- subtypes or formal parameters. if Ada_Version >= Ada_2005 and then Is_Access_Type (T1) then if Is_Local_Anonymous_Access (T1) or else Ekind (T2) = E_Anonymous_Access_Subprogram_Type -- Handle assignment to an Ada 2012 stand-alone object -- of an anonymous access type. or else (Ekind (T1) = E_Anonymous_Access_Type and then Nkind (Associated_Node_For_Itype (T1)) = N_Object_Declaration) then Rewrite (Rhs, Convert_To (T1, Relocate_Node (Rhs))); Analyze_And_Resolve (Rhs, T1); end if; end if; -- Ada 2005 (AI-231): Assignment to not null variable if Ada_Version >= Ada_2005 and then Can_Never_Be_Null (T1) and then not Assignment_OK (Lhs) then -- Case where we know the right hand side is null if Known_Null (Rhs) then Apply_Compile_Time_Constraint_Error (N => Rhs, Msg => "(Ada 2005) null not allowed in null-excluding objects??", Reason => CE_Null_Not_Allowed); -- We still mark this as a possible modification, that's necessary -- to reset Is_True_Constant, and desirable for xref purposes. Note_Possible_Modification (Lhs, Sure => True); goto Leave; -- If we know the right hand side is non-null, then we convert to the -- target type, since we don't need a run time check in that case. elsif not Can_Never_Be_Null (T2) then Rewrite (Rhs, Convert_To (T1, Relocate_Node (Rhs))); Analyze_And_Resolve (Rhs, T1); end if; end if; if Is_Scalar_Type (T1) then Apply_Scalar_Range_Check (Rhs, Etype (Lhs)); -- For array types, verify that lengths match. If the right hand side -- is a function call that has been inlined, the assignment has been -- rewritten as a block, and the constraint check will be applied to the -- assignment within the block. elsif Is_Array_Type (T1) and then (Nkind (Rhs) /= N_Type_Conversion or else Is_Constrained (Etype (Rhs))) and then (Nkind (Rhs) /= N_Function_Call or else Nkind (N) /= N_Block_Statement) then -- Assignment verifies that the length of the Lsh and Rhs are equal, -- but of course the indexes do not have to match. If the right-hand -- side is a type conversion to an unconstrained type, a length check -- is performed on the expression itself during expansion. In rare -- cases, the redundant length check is computed on an index type -- with a different representation, triggering incorrect code in the -- back end. Apply_Length_Check (Rhs, Etype (Lhs)); else -- Discriminant checks are applied in the course of expansion null; end if; -- Note: modifications of the Lhs may only be recorded after -- checks have been applied. Note_Possible_Modification (Lhs, Sure => True); -- ??? a real accessibility check is needed when ??? -- Post warning for redundant assignment or variable to itself if Warn_On_Redundant_Constructs -- We only warn for source constructs and then Comes_From_Source (N) -- Where the object is the same on both sides and then Same_Object (Lhs, Original_Node (Rhs)) -- But exclude the case where the right side was an operation that -- got rewritten (e.g. JUNK + K, where K was known to be zero). We -- don't want to warn in such a case, since it is reasonable to write -- such expressions especially when K is defined symbolically in some -- other package. and then Nkind (Original_Node (Rhs)) not in N_Op then if Nkind (Lhs) in N_Has_Entity then Error_Msg_NE -- CODEFIX ("?r?useless assignment of & to itself!", N, Entity (Lhs)); else Error_Msg_N -- CODEFIX ("?r?useless assignment of object to itself!", N); end if; end if; -- Check for non-allowed composite assignment if not Support_Composite_Assign_On_Target and then (Is_Array_Type (T1) or else Is_Record_Type (T1)) and then (not Has_Size_Clause (T1) or else Esize (T1) > 64) then Error_Msg_CRT ("composite assignment", N); end if; -- Check elaboration warning for left side if not in elab code if Legacy_Elaboration_Checks and not In_Subprogram_Or_Concurrent_Unit then Check_Elab_Assign (Lhs); end if; -- Save the scenario for later examination by the ABE Processing phase Record_Elaboration_Scenario (N); -- Set Referenced_As_LHS if appropriate. We only set this flag if the -- assignment is a source assignment in the extended main source unit. -- We are not interested in any reference information outside this -- context, or in compiler generated assignment statements. if Comes_From_Source (N) and then In_Extended_Main_Source_Unit (Lhs) then Set_Referenced_Modified (Lhs, Out_Param => False); end if; -- RM 7.3.2 (12/3): An assignment to a view conversion (from a type to -- one of its ancestors) requires an invariant check. Apply check only -- if expression comes from source, otherwise it will be applied when -- value is assigned to source entity. This is not done in GNATprove -- mode, as GNATprove handles invariant checks itself. if Nkind (Lhs) = N_Type_Conversion and then Has_Invariants (Etype (Expression (Lhs))) and then Comes_From_Source (Expression (Lhs)) and then not GNATprove_Mode then Insert_After (N, Make_Invariant_Call (Expression (Lhs))); end if; -- Final step. If left side is an entity, then we may be able to reset -- the current tracked values to new safe values. We only have something -- to do if the left side is an entity name, and expansion has not -- modified the node into something other than an assignment, and of -- course we only capture values if it is safe to do so. if Is_Entity_Name (Lhs) and then Nkind (N) = N_Assignment_Statement then declare Ent : constant Entity_Id := Entity (Lhs); begin if Safe_To_Capture_Value (N, Ent) then -- If simple variable on left side, warn if this assignment -- blots out another one (rendering it useless). We only do -- this for source assignments, otherwise we can generate bogus -- warnings when an assignment is rewritten as another -- assignment, and gets tied up with itself. -- There may have been a previous reference to a component of -- the variable, which in general removes the Last_Assignment -- field of the variable to indicate a relevant use of the -- previous assignment. However, if the assignment is to a -- subcomponent the reference may not have registered, because -- it is not possible to determine whether the context is an -- assignment. In those cases we generate a Deferred_Reference, -- to be used at the end of compilation to generate the right -- kind of reference, and we suppress a potential warning for -- a useless assignment, which might be premature. This may -- lose a warning in rare cases, but seems preferable to a -- misleading warning. if Warn_On_Modified_Unread and then Is_Assignable (Ent) and then Comes_From_Source (N) and then In_Extended_Main_Source_Unit (Ent) and then not Has_Deferred_Reference (Ent) then Warn_On_Useless_Assignment (Ent, N); end if; -- If we are assigning an access type and the left side is an -- entity, then make sure that the Is_Known_[Non_]Null flags -- properly reflect the state of the entity after assignment. if Is_Access_Type (T1) then if Known_Non_Null (Rhs) then Set_Is_Known_Non_Null (Ent, True); elsif Known_Null (Rhs) and then not Can_Never_Be_Null (Ent) then Set_Is_Known_Null (Ent, True); else Set_Is_Known_Null (Ent, False); if not Can_Never_Be_Null (Ent) then Set_Is_Known_Non_Null (Ent, False); end if; end if; -- For discrete types, we may be able to set the current value -- if the value is known at compile time. elsif Is_Discrete_Type (T1) and then Compile_Time_Known_Value (Rhs) then Set_Current_Value (Ent, Rhs); else Set_Current_Value (Ent, Empty); end if; -- If not safe to capture values, kill them else Kill_Lhs; end if; end; end if; -- If assigning to an object in whole or in part, note location of -- assignment in case no one references value. We only do this for -- source assignments, otherwise we can generate bogus warnings when an -- assignment is rewritten as another assignment, and gets tied up with -- itself. declare Ent : constant Entity_Id := Get_Enclosing_Object (Lhs); begin if Present (Ent) and then Safe_To_Capture_Value (N, Ent) and then Nkind (N) = N_Assignment_Statement and then Warn_On_Modified_Unread and then Is_Assignable (Ent) and then Comes_From_Source (N) and then In_Extended_Main_Source_Unit (Ent) then Set_Last_Assignment (Ent, Lhs); end if; end; Analyze_Dimension (N); <> Restore_Ghost_Region (Saved_GM, Saved_IGR); -- If the right-hand side contains target names, expansion has been -- disabled to prevent expansion that might move target names out of -- the context of the assignment statement. Restore the expander mode -- now so that assignment statement can be properly expanded. if Nkind (N) = N_Assignment_Statement then if Has_Target_Names (N) then Expander_Mode_Restore; Full_Analysis := Save_Full_Analysis; end if; pragma Assert (not Should_Transform_BIP_Assignment (Typ => T1)); end if; end Analyze_Assignment; ----------------------------- -- Analyze_Block_Statement -- ----------------------------- procedure Analyze_Block_Statement (N : Node_Id) is procedure Install_Return_Entities (Scop : Entity_Id); -- Install all entities of return statement scope Scop in the visibility -- chain except for the return object since its entity is reused in a -- renaming. ----------------------------- -- Install_Return_Entities -- ----------------------------- procedure Install_Return_Entities (Scop : Entity_Id) is Id : Entity_Id; begin Id := First_Entity (Scop); while Present (Id) loop -- Do not install the return object if not Ekind_In (Id, E_Constant, E_Variable) or else not Is_Return_Object (Id) then Install_Entity (Id); end if; Next_Entity (Id); end loop; end Install_Return_Entities; -- Local constants and variables Decls : constant List_Id := Declarations (N); Id : constant Node_Id := Identifier (N); HSS : constant Node_Id := Handled_Statement_Sequence (N); Is_BIP_Return_Statement : Boolean; -- Start of processing for Analyze_Block_Statement begin -- In SPARK mode, we reject block statements. Note that the case of -- block statements generated by the expander is fine. if Nkind (Original_Node (N)) = N_Block_Statement then Check_SPARK_05_Restriction ("block statement is not allowed", N); end if; -- If no handled statement sequence is present, things are really messed -- up, and we just return immediately (defence against previous errors). if No (HSS) then Check_Error_Detected; return; end if; -- Detect whether the block is actually a rewritten return statement of -- a build-in-place function. Is_BIP_Return_Statement := Present (Id) and then Present (Entity (Id)) and then Ekind (Entity (Id)) = E_Return_Statement and then Is_Build_In_Place_Function (Return_Applies_To (Entity (Id))); -- Normal processing with HSS present declare EH : constant List_Id := Exception_Handlers (HSS); Ent : Entity_Id := Empty; S : Entity_Id; Save_Unblocked_Exit_Count : constant Nat := Unblocked_Exit_Count; -- Recursively save value of this global, will be restored on exit begin -- Initialize unblocked exit count for statements of begin block -- plus one for each exception handler that is present. Unblocked_Exit_Count := 1; if Present (EH) then Unblocked_Exit_Count := Unblocked_Exit_Count + List_Length (EH); end if; -- If a label is present analyze it and mark it as referenced if Present (Id) then Analyze (Id); Ent := Entity (Id); -- An error defense. If we have an identifier, but no entity, then -- something is wrong. If previous errors, then just remove the -- identifier and continue, otherwise raise an exception. if No (Ent) then Check_Error_Detected; Set_Identifier (N, Empty); else Set_Ekind (Ent, E_Block); Generate_Reference (Ent, N, ' '); Generate_Definition (Ent); if Nkind (Parent (Ent)) = N_Implicit_Label_Declaration then Set_Label_Construct (Parent (Ent), N); end if; end if; end if; -- If no entity set, create a label entity if No (Ent) then Ent := New_Internal_Entity (E_Block, Current_Scope, Sloc (N), 'B'); Set_Identifier (N, New_Occurrence_Of (Ent, Sloc (N))); Set_Parent (Ent, N); end if; Set_Etype (Ent, Standard_Void_Type); Set_Block_Node (Ent, Identifier (N)); Push_Scope (Ent); -- The block served as an extended return statement. Ensure that any -- entities created during the analysis and expansion of the return -- object declaration are once again visible. if Is_BIP_Return_Statement then Install_Return_Entities (Ent); end if; if Present (Decls) then Analyze_Declarations (Decls); Check_Completion; Inspect_Deferred_Constant_Completion (Decls); end if; Analyze (HSS); Process_End_Label (HSS, 'e', Ent); -- If exception handlers are present, then we indicate that enclosing -- scopes contain a block with handlers. We only need to mark non- -- generic scopes. if Present (EH) then S := Scope (Ent); loop Set_Has_Nested_Block_With_Handler (S); exit when Is_Overloadable (S) or else Ekind (S) = E_Package or else Is_Generic_Unit (S); S := Scope (S); end loop; end if; Check_References (Ent); Update_Use_Clause_Chain; End_Scope; if Unblocked_Exit_Count = 0 then Unblocked_Exit_Count := Save_Unblocked_Exit_Count; Check_Unreachable_Code (N); else Unblocked_Exit_Count := Save_Unblocked_Exit_Count; end if; end; end Analyze_Block_Statement; -------------------------------- -- Analyze_Compound_Statement -- -------------------------------- procedure Analyze_Compound_Statement (N : Node_Id) is begin Analyze_List (Actions (N)); end Analyze_Compound_Statement; ---------------------------- -- Analyze_Case_Statement -- ---------------------------- procedure Analyze_Case_Statement (N : Node_Id) is Exp : Node_Id; Exp_Type : Entity_Id; Exp_Btype : Entity_Id; Last_Choice : Nat; Others_Present : Boolean; -- Indicates if Others was present pragma Warnings (Off, Last_Choice); -- Don't care about assigned value Statements_Analyzed : Boolean := False; -- Set True if at least some statement sequences get analyzed. If False -- on exit, means we had a serious error that prevented full analysis of -- the case statement, and as a result it is not a good idea to output -- warning messages about unreachable code. Save_Unblocked_Exit_Count : constant Nat := Unblocked_Exit_Count; -- Recursively save value of this global, will be restored on exit procedure Non_Static_Choice_Error (Choice : Node_Id); -- Error routine invoked by the generic instantiation below when the -- case statement has a non static choice. procedure Process_Statements (Alternative : Node_Id); -- Analyzes the statements associated with a case alternative. Needed -- by instantiation below. package Analyze_Case_Choices is new Generic_Analyze_Choices (Process_Associated_Node => Process_Statements); use Analyze_Case_Choices; -- Instantiation of the generic choice analysis package package Check_Case_Choices is new Generic_Check_Choices (Process_Empty_Choice => No_OP, Process_Non_Static_Choice => Non_Static_Choice_Error, Process_Associated_Node => No_OP); use Check_Case_Choices; -- Instantiation of the generic choice processing package ----------------------------- -- Non_Static_Choice_Error -- ----------------------------- procedure Non_Static_Choice_Error (Choice : Node_Id) is begin Flag_Non_Static_Expr ("choice given in case statement is not static!", Choice); end Non_Static_Choice_Error; ------------------------ -- Process_Statements -- ------------------------ procedure Process_Statements (Alternative : Node_Id) is Choices : constant List_Id := Discrete_Choices (Alternative); Ent : Entity_Id; begin Unblocked_Exit_Count := Unblocked_Exit_Count + 1; Statements_Analyzed := True; -- An interesting optimization. If the case statement expression -- is a simple entity, then we can set the current value within an -- alternative if the alternative has one possible value. -- case N is -- when 1 => alpha -- when 2 | 3 => beta -- when others => gamma -- Here we know that N is initially 1 within alpha, but for beta and -- gamma, we do not know anything more about the initial value. if Is_Entity_Name (Exp) then Ent := Entity (Exp); if Ekind_In (Ent, E_Variable, E_In_Out_Parameter, E_Out_Parameter) then if List_Length (Choices) = 1 and then Nkind (First (Choices)) in N_Subexpr and then Compile_Time_Known_Value (First (Choices)) then Set_Current_Value (Entity (Exp), First (Choices)); end if; Analyze_Statements (Statements (Alternative)); -- After analyzing the case, set the current value to empty -- since we won't know what it is for the next alternative -- (unless reset by this same circuit), or after the case. Set_Current_Value (Entity (Exp), Empty); return; end if; end if; -- Case where expression is not an entity name of a variable Analyze_Statements (Statements (Alternative)); end Process_Statements; -- Start of processing for Analyze_Case_Statement begin Unblocked_Exit_Count := 0; Exp := Expression (N); Analyze (Exp); -- The expression must be of any discrete type. In rare cases, the -- expander constructs a case statement whose expression has a private -- type whose full view is discrete. This can happen when generating -- a stream operation for a variant type after the type is frozen, -- when the partial of view of the type of the discriminant is private. -- In that case, use the full view to analyze case alternatives. if not Is_Overloaded (Exp) and then not Comes_From_Source (N) and then Is_Private_Type (Etype (Exp)) and then Present (Full_View (Etype (Exp))) and then Is_Discrete_Type (Full_View (Etype (Exp))) then Resolve (Exp, Etype (Exp)); Exp_Type := Full_View (Etype (Exp)); else Analyze_And_Resolve (Exp, Any_Discrete); Exp_Type := Etype (Exp); end if; Check_Unset_Reference (Exp); Exp_Btype := Base_Type (Exp_Type); -- The expression must be of a discrete type which must be determinable -- independently of the context in which the expression occurs, but -- using the fact that the expression must be of a discrete type. -- Moreover, the type this expression must not be a character literal -- (which is always ambiguous) or, for Ada-83, a generic formal type. -- If error already reported by Resolve, nothing more to do if Exp_Btype = Any_Discrete or else Exp_Btype = Any_Type then return; elsif Exp_Btype = Any_Character then Error_Msg_N ("character literal as case expression is ambiguous", Exp); return; elsif Ada_Version = Ada_83 and then (Is_Generic_Type (Exp_Btype) or else Is_Generic_Type (Root_Type (Exp_Btype))) then Error_Msg_N ("(Ada 83) case expression cannot be of a generic type", Exp); return; end if; -- If the case expression is a formal object of mode in out, then treat -- it as having a nonstatic subtype by forcing use of the base type -- (which has to get passed to Check_Case_Choices below). Also use base -- type when the case expression is parenthesized. if Paren_Count (Exp) > 0 or else (Is_Entity_Name (Exp) and then Ekind (Entity (Exp)) = E_Generic_In_Out_Parameter) then Exp_Type := Exp_Btype; end if; -- Call instantiated procedures to analyzwe and check discrete choices Analyze_Choices (Alternatives (N), Exp_Type); Check_Choices (N, Alternatives (N), Exp_Type, Others_Present); -- Case statement with single OTHERS alternative not allowed in SPARK if Others_Present and then List_Length (Alternatives (N)) = 1 then Check_SPARK_05_Restriction ("OTHERS as unique case alternative is not allowed", N); end if; if Exp_Type = Universal_Integer and then not Others_Present then Error_Msg_N ("case on universal integer requires OTHERS choice", Exp); end if; -- If all our exits were blocked by unconditional transfers of control, -- then the entire CASE statement acts as an unconditional transfer of -- control, so treat it like one, and check unreachable code. Skip this -- test if we had serious errors preventing any statement analysis. if Unblocked_Exit_Count = 0 and then Statements_Analyzed then Unblocked_Exit_Count := Save_Unblocked_Exit_Count; Check_Unreachable_Code (N); else Unblocked_Exit_Count := Save_Unblocked_Exit_Count; end if; -- If the expander is active it will detect the case of a statically -- determined single alternative and remove warnings for the case, but -- if we are not doing expansion, that circuit won't be active. Here we -- duplicate the effect of removing warnings in the same way, so that -- we will get the same set of warnings in -gnatc mode. if not Expander_Active and then Compile_Time_Known_Value (Expression (N)) and then Serious_Errors_Detected = 0 then declare Chosen : constant Node_Id := Find_Static_Alternative (N); Alt : Node_Id; begin Alt := First (Alternatives (N)); while Present (Alt) loop if Alt /= Chosen then Remove_Warning_Messages (Statements (Alt)); end if; Next (Alt); end loop; end; end if; end Analyze_Case_Statement; ---------------------------- -- Analyze_Exit_Statement -- ---------------------------- -- If the exit includes a name, it must be the name of a currently open -- loop. Otherwise there must be an innermost open loop on the stack, to -- which the statement implicitly refers. -- Additionally, in SPARK mode: -- The exit can only name the closest enclosing loop; -- An exit with a when clause must be directly contained in a loop; -- An exit without a when clause must be directly contained in an -- if-statement with no elsif or else, which is itself directly contained -- in a loop. The exit must be the last statement in the if-statement. procedure Analyze_Exit_Statement (N : Node_Id) is Target : constant Node_Id := Name (N); Cond : constant Node_Id := Condition (N); Scope_Id : Entity_Id := Empty; -- initialize to prevent warning U_Name : Entity_Id; Kind : Entity_Kind; begin if No (Cond) then Check_Unreachable_Code (N); end if; if Present (Target) then Analyze (Target); U_Name := Entity (Target); if not In_Open_Scopes (U_Name) or else Ekind (U_Name) /= E_Loop then Error_Msg_N ("invalid loop name in exit statement", N); return; else if Has_Loop_In_Inner_Open_Scopes (U_Name) then Check_SPARK_05_Restriction ("exit label must name the closest enclosing loop", N); end if; Set_Has_Exit (U_Name); end if; else U_Name := Empty; end if; for J in reverse 0 .. Scope_Stack.Last loop Scope_Id := Scope_Stack.Table (J).Entity; Kind := Ekind (Scope_Id); if Kind = E_Loop and then (No (Target) or else Scope_Id = U_Name) then Set_Has_Exit (Scope_Id); exit; elsif Kind = E_Block or else Kind = E_Loop or else Kind = E_Return_Statement then null; else Error_Msg_N ("cannot exit from program unit or accept statement", N); return; end if; end loop; -- Verify that if present the condition is a Boolean expression if Present (Cond) then Analyze_And_Resolve (Cond, Any_Boolean); Check_Unset_Reference (Cond); end if; -- In SPARK mode, verify that the exit statement respects the SPARK -- restrictions. if Present (Cond) then if Nkind (Parent (N)) /= N_Loop_Statement then Check_SPARK_05_Restriction ("exit with when clause must be directly in loop", N); end if; else if Nkind (Parent (N)) /= N_If_Statement then if Nkind (Parent (N)) = N_Elsif_Part then Check_SPARK_05_Restriction ("exit must be in IF without ELSIF", N); else Check_SPARK_05_Restriction ("exit must be directly in IF", N); end if; elsif Nkind (Parent (Parent (N))) /= N_Loop_Statement then Check_SPARK_05_Restriction ("exit must be in IF directly in loop", N); -- First test the presence of ELSE, so that an exit in an ELSE leads -- to an error mentioning the ELSE. elsif Present (Else_Statements (Parent (N))) then Check_SPARK_05_Restriction ("exit must be in IF without ELSE", N); -- An exit in an ELSIF does not reach here, as it would have been -- detected in the case (Nkind (Parent (N)) /= N_If_Statement). elsif Present (Elsif_Parts (Parent (N))) then Check_SPARK_05_Restriction ("exit must be in IF without ELSIF", N); end if; end if; -- Chain exit statement to associated loop entity Set_Next_Exit_Statement (N, First_Exit_Statement (Scope_Id)); Set_First_Exit_Statement (Scope_Id, N); -- Since the exit may take us out of a loop, any previous assignment -- statement is not useless, so clear last assignment indications. It -- is OK to keep other current values, since if the exit statement -- does not exit, then the current values are still valid. Kill_Current_Values (Last_Assignment_Only => True); end Analyze_Exit_Statement; ---------------------------- -- Analyze_Goto_Statement -- ---------------------------- procedure Analyze_Goto_Statement (N : Node_Id) is Label : constant Node_Id := Name (N); Scope_Id : Entity_Id; Label_Scope : Entity_Id; Label_Ent : Entity_Id; begin Check_SPARK_05_Restriction ("goto statement is not allowed", N); -- Actual semantic checks Check_Unreachable_Code (N); Kill_Current_Values (Last_Assignment_Only => True); Analyze (Label); Label_Ent := Entity (Label); -- Ignore previous error if Label_Ent = Any_Id then Check_Error_Detected; return; -- We just have a label as the target of a goto elsif Ekind (Label_Ent) /= E_Label then Error_Msg_N ("target of goto statement must be a label", Label); return; -- Check that the target of the goto is reachable according to Ada -- scoping rules. Note: the special gotos we generate for optimizing -- local handling of exceptions would violate these rules, but we mark -- such gotos as analyzed when built, so this code is never entered. elsif not Reachable (Label_Ent) then Error_Msg_N ("target of goto statement is not reachable", Label); return; end if; -- Here if goto passes initial validity checks Label_Scope := Enclosing_Scope (Label_Ent); for J in reverse 0 .. Scope_Stack.Last loop Scope_Id := Scope_Stack.Table (J).Entity; if Label_Scope = Scope_Id or else not Ekind_In (Scope_Id, E_Block, E_Loop, E_Return_Statement) then if Scope_Id /= Label_Scope then Error_Msg_N ("cannot exit from program unit or accept statement", N); end if; return; end if; end loop; raise Program_Error; end Analyze_Goto_Statement; -------------------------- -- Analyze_If_Statement -- -------------------------- -- A special complication arises in the analysis of if statements -- The expander has circuitry to completely delete code that it can tell -- will not be executed (as a result of compile time known conditions). In -- the analyzer, we ensure that code that will be deleted in this manner -- is analyzed but not expanded. This is obviously more efficient, but -- more significantly, difficulties arise if code is expanded and then -- eliminated (e.g. exception table entries disappear). Similarly, itypes -- generated in deleted code must be frozen from start, because the nodes -- on which they depend will not be available at the freeze point. procedure Analyze_If_Statement (N : Node_Id) is E : Node_Id; Save_Unblocked_Exit_Count : constant Nat := Unblocked_Exit_Count; -- Recursively save value of this global, will be restored on exit Save_In_Deleted_Code : Boolean; Del : Boolean := False; -- This flag gets set True if a True condition has been found, which -- means that remaining ELSE/ELSIF parts are deleted. procedure Analyze_Cond_Then (Cnode : Node_Id); -- This is applied to either the N_If_Statement node itself or to an -- N_Elsif_Part node. It deals with analyzing the condition and the THEN -- statements associated with it. ----------------------- -- Analyze_Cond_Then -- ----------------------- procedure Analyze_Cond_Then (Cnode : Node_Id) is Cond : constant Node_Id := Condition (Cnode); Tstm : constant List_Id := Then_Statements (Cnode); begin Unblocked_Exit_Count := Unblocked_Exit_Count + 1; Analyze_And_Resolve (Cond, Any_Boolean); Check_Unset_Reference (Cond); Set_Current_Value_Condition (Cnode); -- If already deleting, then just analyze then statements if Del then Analyze_Statements (Tstm); -- Compile time known value, not deleting yet elsif Compile_Time_Known_Value (Cond) then Save_In_Deleted_Code := In_Deleted_Code; -- If condition is True, then analyze the THEN statements and set -- no expansion for ELSE and ELSIF parts. if Is_True (Expr_Value (Cond)) then Analyze_Statements (Tstm); Del := True; Expander_Mode_Save_And_Set (False); In_Deleted_Code := True; -- If condition is False, analyze THEN with expansion off else -- Is_False (Expr_Value (Cond)) Expander_Mode_Save_And_Set (False); In_Deleted_Code := True; Analyze_Statements (Tstm); Expander_Mode_Restore; In_Deleted_Code := Save_In_Deleted_Code; end if; -- Not known at compile time, not deleting, normal analysis else Analyze_Statements (Tstm); end if; end Analyze_Cond_Then; -- Start of processing for Analyze_If_Statement begin -- Initialize exit count for else statements. If there is no else part, -- this count will stay non-zero reflecting the fact that the uncovered -- else case is an unblocked exit. Unblocked_Exit_Count := 1; Analyze_Cond_Then (N); -- Now to analyze the elsif parts if any are present if Present (Elsif_Parts (N)) then E := First (Elsif_Parts (N)); while Present (E) loop Analyze_Cond_Then (E); Next (E); end loop; end if; if Present (Else_Statements (N)) then Analyze_Statements (Else_Statements (N)); end if; -- If all our exits were blocked by unconditional transfers of control, -- then the entire IF statement acts as an unconditional transfer of -- control, so treat it like one, and check unreachable code. if Unblocked_Exit_Count = 0 then Unblocked_Exit_Count := Save_Unblocked_Exit_Count; Check_Unreachable_Code (N); else Unblocked_Exit_Count := Save_Unblocked_Exit_Count; end if; if Del then Expander_Mode_Restore; In_Deleted_Code := Save_In_Deleted_Code; end if; if not Expander_Active and then Compile_Time_Known_Value (Condition (N)) and then Serious_Errors_Detected = 0 then if Is_True (Expr_Value (Condition (N))) then Remove_Warning_Messages (Else_Statements (N)); if Present (Elsif_Parts (N)) then E := First (Elsif_Parts (N)); while Present (E) loop Remove_Warning_Messages (Then_Statements (E)); Next (E); end loop; end if; else Remove_Warning_Messages (Then_Statements (N)); end if; end if; -- Warn on redundant if statement that has no effect -- Note, we could also check empty ELSIF parts ??? if Warn_On_Redundant_Constructs -- If statement must be from source and then Comes_From_Source (N) -- Condition must not have obvious side effect and then Has_No_Obvious_Side_Effects (Condition (N)) -- No elsif parts of else part and then No (Elsif_Parts (N)) and then No (Else_Statements (N)) -- Then must be a single null statement and then List_Length (Then_Statements (N)) = 1 then -- Go to original node, since we may have rewritten something as -- a null statement (e.g. a case we could figure the outcome of). declare T : constant Node_Id := First (Then_Statements (N)); S : constant Node_Id := Original_Node (T); begin if Comes_From_Source (S) and then Nkind (S) = N_Null_Statement then Error_Msg_N ("if statement has no effect?r?", N); end if; end; end if; end Analyze_If_Statement; ---------------------------------------- -- Analyze_Implicit_Label_Declaration -- ---------------------------------------- -- An implicit label declaration is generated in the innermost enclosing -- declarative part. This is done for labels, and block and loop names. -- Note: any changes in this routine may need to be reflected in -- Analyze_Label_Entity. procedure Analyze_Implicit_Label_Declaration (N : Node_Id) is Id : constant Node_Id := Defining_Identifier (N); begin Enter_Name (Id); Set_Ekind (Id, E_Label); Set_Etype (Id, Standard_Void_Type); Set_Enclosing_Scope (Id, Current_Scope); end Analyze_Implicit_Label_Declaration; ------------------------------ -- Analyze_Iteration_Scheme -- ------------------------------ procedure Analyze_Iteration_Scheme (N : Node_Id) is Cond : Node_Id; Iter_Spec : Node_Id; Loop_Spec : Node_Id; begin -- For an infinite loop, there is no iteration scheme if No (N) then return; end if; Cond := Condition (N); Iter_Spec := Iterator_Specification (N); Loop_Spec := Loop_Parameter_Specification (N); if Present (Cond) then Analyze_And_Resolve (Cond, Any_Boolean); Check_Unset_Reference (Cond); Set_Current_Value_Condition (N); elsif Present (Iter_Spec) then Analyze_Iterator_Specification (Iter_Spec); else Analyze_Loop_Parameter_Specification (Loop_Spec); end if; end Analyze_Iteration_Scheme; ------------------------------------ -- Analyze_Iterator_Specification -- ------------------------------------ procedure Analyze_Iterator_Specification (N : Node_Id) is Def_Id : constant Node_Id := Defining_Identifier (N); Iter_Name : constant Node_Id := Name (N); Loc : constant Source_Ptr := Sloc (N); Subt : constant Node_Id := Subtype_Indication (N); Bas : Entity_Id := Empty; -- initialize to prevent warning Typ : Entity_Id; procedure Check_Reverse_Iteration (Typ : Entity_Id); -- For an iteration over a container, if the loop carries the Reverse -- indicator, verify that the container type has an Iterate aspect that -- implements the reversible iterator interface. procedure Check_Subtype_Indication (Comp_Type : Entity_Id); -- If a subtype indication is present, verify that it is consistent -- with the component type of the array or container name. function Get_Cursor_Type (Typ : Entity_Id) return Entity_Id; -- For containers with Iterator and related aspects, the cursor is -- obtained by locating an entity with the proper name in the scope -- of the type. ----------------------------- -- Check_Reverse_Iteration -- ----------------------------- procedure Check_Reverse_Iteration (Typ : Entity_Id) is begin if Reverse_Present (N) then if Is_Array_Type (Typ) or else Is_Reversible_Iterator (Typ) or else (Present (Find_Aspect (Typ, Aspect_Iterable)) and then Present (Get_Iterable_Type_Primitive (Typ, Name_Previous))) then null; else Error_Msg_NE ("container type does not support reverse iteration", N, Typ); end if; end if; end Check_Reverse_Iteration; ------------------------------- -- Check_Subtype_Indication -- ------------------------------- procedure Check_Subtype_Indication (Comp_Type : Entity_Id) is begin if Present (Subt) and then (not Covers (Base_Type ((Bas)), Comp_Type) or else not Subtypes_Statically_Match (Bas, Comp_Type)) then if Is_Array_Type (Typ) then Error_Msg_N ("subtype indication does not match component type", Subt); else Error_Msg_N ("subtype indication does not match element type", Subt); end if; end if; end Check_Subtype_Indication; --------------------- -- Get_Cursor_Type -- --------------------- function Get_Cursor_Type (Typ : Entity_Id) return Entity_Id is Ent : Entity_Id; begin -- If iterator type is derived, the cursor is declared in the scope -- of the parent type. if Is_Derived_Type (Typ) then Ent := First_Entity (Scope (Etype (Typ))); else Ent := First_Entity (Scope (Typ)); end if; while Present (Ent) loop exit when Chars (Ent) = Name_Cursor; Next_Entity (Ent); end loop; if No (Ent) then return Any_Type; end if; -- The cursor is the target of generated assignments in the -- loop, and cannot have a limited type. if Is_Limited_Type (Etype (Ent)) then Error_Msg_N ("cursor type cannot be limited", N); end if; return Etype (Ent); end Get_Cursor_Type; -- Start of processing for Analyze_Iterator_Specification begin Enter_Name (Def_Id); -- AI12-0151 specifies that when the subtype indication is present, it -- must statically match the type of the array or container element. -- To simplify this check, we introduce a subtype declaration with the -- given subtype indication when it carries a constraint, and rewrite -- the original as a reference to the created subtype entity. if Present (Subt) then if Nkind (Subt) = N_Subtype_Indication then declare S : constant Entity_Id := Make_Temporary (Sloc (Subt), 'S'); Decl : constant Node_Id := Make_Subtype_Declaration (Loc, Defining_Identifier => S, Subtype_Indication => New_Copy_Tree (Subt)); begin Insert_Before (Parent (Parent (N)), Decl); Analyze (Decl); Rewrite (Subt, New_Occurrence_Of (S, Sloc (Subt))); end; else Analyze (Subt); end if; -- Save entity of subtype indication for subsequent check Bas := Entity (Subt); end if; Preanalyze_Range (Iter_Name); -- Set the kind of the loop variable, which is not visible within the -- iterator name. Set_Ekind (Def_Id, E_Variable); -- Provide a link between the iterator variable and the container, for -- subsequent use in cross-reference and modification information. if Of_Present (N) then Set_Related_Expression (Def_Id, Iter_Name); -- For a container, the iterator is specified through the aspect if not Is_Array_Type (Etype (Iter_Name)) then declare Iterator : constant Entity_Id := Find_Value_Of_Aspect (Etype (Iter_Name), Aspect_Default_Iterator); I : Interp_Index; It : Interp; begin if No (Iterator) then null; -- error reported below elsif not Is_Overloaded (Iterator) then Check_Reverse_Iteration (Etype (Iterator)); -- If Iterator is overloaded, use reversible iterator if one is -- available. elsif Is_Overloaded (Iterator) then Get_First_Interp (Iterator, I, It); while Present (It.Nam) loop if Ekind (It.Nam) = E_Function and then Is_Reversible_Iterator (Etype (It.Nam)) then Set_Etype (Iterator, It.Typ); Set_Entity (Iterator, It.Nam); exit; end if; Get_Next_Interp (I, It); end loop; Check_Reverse_Iteration (Etype (Iterator)); end if; end; end if; end if; -- If the domain of iteration is an expression, create a declaration for -- it, so that finalization actions are introduced outside of the loop. -- The declaration must be a renaming because the body of the loop may -- assign to elements. if not Is_Entity_Name (Iter_Name) -- When the context is a quantified expression, the renaming -- declaration is delayed until the expansion phase if we are -- doing expansion. and then (Nkind (Parent (N)) /= N_Quantified_Expression or else Operating_Mode = Check_Semantics) -- Do not perform this expansion for ASIS and when expansion is -- disabled, where the temporary may hide the transformation of a -- selected component into a prefixed function call, and references -- need to see the original expression. and then Expander_Active then declare Id : constant Entity_Id := Make_Temporary (Loc, 'R', Iter_Name); Decl : Node_Id; Act_S : Node_Id; begin -- If the domain of iteration is an array component that depends -- on a discriminant, create actual subtype for it. Pre-analysis -- does not generate the actual subtype of a selected component. if Nkind (Iter_Name) = N_Selected_Component and then Is_Array_Type (Etype (Iter_Name)) then Act_S := Build_Actual_Subtype_Of_Component (Etype (Selector_Name (Iter_Name)), Iter_Name); Insert_Action (N, Act_S); if Present (Act_S) then Typ := Defining_Identifier (Act_S); else Typ := Etype (Iter_Name); end if; else Typ := Etype (Iter_Name); -- Verify that the expression produces an iterator if not Of_Present (N) and then not Is_Iterator (Typ) and then not Is_Array_Type (Typ) and then No (Find_Aspect (Typ, Aspect_Iterable)) then Error_Msg_N ("expect object that implements iterator interface", Iter_Name); end if; end if; -- Protect against malformed iterator if Typ = Any_Type then Error_Msg_N ("invalid expression in loop iterator", Iter_Name); return; end if; if not Of_Present (N) then Check_Reverse_Iteration (Typ); end if; -- The name in the renaming declaration may be a function call. -- Indicate that it does not come from source, to suppress -- spurious warnings on renamings of parameterless functions, -- a common enough idiom in user-defined iterators. Decl := Make_Object_Renaming_Declaration (Loc, Defining_Identifier => Id, Subtype_Mark => New_Occurrence_Of (Typ, Loc), Name => New_Copy_Tree (Iter_Name, New_Sloc => Loc)); Insert_Actions (Parent (Parent (N)), New_List (Decl)); Rewrite (Name (N), New_Occurrence_Of (Id, Loc)); Set_Etype (Id, Typ); Set_Etype (Name (N), Typ); end; -- Container is an entity or an array with uncontrolled components, or -- else it is a container iterator given by a function call, typically -- called Iterate in the case of predefined containers, even though -- Iterate is not a reserved name. What matters is that the return type -- of the function is an iterator type. elsif Is_Entity_Name (Iter_Name) then Analyze (Iter_Name); if Nkind (Iter_Name) = N_Function_Call then declare C : constant Node_Id := Name (Iter_Name); I : Interp_Index; It : Interp; begin if not Is_Overloaded (Iter_Name) then Resolve (Iter_Name, Etype (C)); else Get_First_Interp (C, I, It); while It.Typ /= Empty loop if Reverse_Present (N) then if Is_Reversible_Iterator (It.Typ) then Resolve (Iter_Name, It.Typ); exit; end if; elsif Is_Iterator (It.Typ) then Resolve (Iter_Name, It.Typ); exit; end if; Get_Next_Interp (I, It); end loop; end if; end; -- Domain of iteration is not overloaded else Resolve (Iter_Name, Etype (Iter_Name)); end if; if not Of_Present (N) then Check_Reverse_Iteration (Etype (Iter_Name)); end if; end if; -- Get base type of container, for proper retrieval of Cursor type -- and primitive operations. Typ := Base_Type (Etype (Iter_Name)); if Is_Array_Type (Typ) then if Of_Present (N) then Set_Etype (Def_Id, Component_Type (Typ)); -- The loop variable is aliased if the array components are -- aliased. Set_Is_Aliased (Def_Id, Has_Aliased_Components (Typ)); -- AI12-0047 stipulates that the domain (array or container) -- cannot be a component that depends on a discriminant if the -- enclosing object is mutable, to prevent a modification of the -- dowmain of iteration in the course of an iteration. -- If the object is an expression it has been captured in a -- temporary, so examine original node. if Nkind (Original_Node (Iter_Name)) = N_Selected_Component and then Is_Dependent_Component_Of_Mutable_Object (Original_Node (Iter_Name)) then Error_Msg_N ("iterable name cannot be a discriminant-dependent " & "component of a mutable object", N); end if; Check_Subtype_Indication (Component_Type (Typ)); -- Here we have a missing Range attribute else Error_Msg_N ("missing Range attribute in iteration over an array", N); -- In Ada 2012 mode, this may be an attempt at an iterator if Ada_Version >= Ada_2012 then Error_Msg_NE ("\if& is meant to designate an element of the array, use OF", N, Def_Id); end if; -- Prevent cascaded errors Set_Ekind (Def_Id, E_Loop_Parameter); Set_Etype (Def_Id, Etype (First_Index (Typ))); end if; -- Check for type error in iterator elsif Typ = Any_Type then return; -- Iteration over a container else Set_Ekind (Def_Id, E_Loop_Parameter); Error_Msg_Ada_2012_Feature ("container iterator", Sloc (N)); -- OF present if Of_Present (N) then if Has_Aspect (Typ, Aspect_Iterable) then declare Elt : constant Entity_Id := Get_Iterable_Type_Primitive (Typ, Name_Element); begin if No (Elt) then Error_Msg_N ("missing Element primitive for iteration", N); else Set_Etype (Def_Id, Etype (Elt)); Check_Reverse_Iteration (Typ); end if; end; Check_Subtype_Indication (Etype (Def_Id)); -- For a predefined container, The type of the loop variable is -- the Iterator_Element aspect of the container type. else declare Element : constant Entity_Id := Find_Value_Of_Aspect (Typ, Aspect_Iterator_Element); Iterator : constant Entity_Id := Find_Value_Of_Aspect (Typ, Aspect_Default_Iterator); Orig_Iter_Name : constant Node_Id := Original_Node (Iter_Name); Cursor_Type : Entity_Id; begin if No (Element) then Error_Msg_NE ("cannot iterate over&", N, Typ); return; else Set_Etype (Def_Id, Entity (Element)); Cursor_Type := Get_Cursor_Type (Typ); pragma Assert (Present (Cursor_Type)); Check_Subtype_Indication (Etype (Def_Id)); -- If the container has a variable indexing aspect, the -- element is a variable and is modifiable in the loop. if Has_Aspect (Typ, Aspect_Variable_Indexing) then Set_Ekind (Def_Id, E_Variable); end if; -- If the container is a constant, iterating over it -- requires a Constant_Indexing operation. if not Is_Variable (Iter_Name) and then not Has_Aspect (Typ, Aspect_Constant_Indexing) then Error_Msg_N ("iteration over constant container require " & "constant_indexing aspect", N); -- The Iterate function may have an in_out parameter, -- and a constant container is thus illegal. elsif Present (Iterator) and then Ekind (Entity (Iterator)) = E_Function and then Ekind (First_Formal (Entity (Iterator))) /= E_In_Parameter and then not Is_Variable (Iter_Name) then Error_Msg_N ("variable container expected", N); end if; -- Detect a case where the iterator denotes a component -- of a mutable object which depends on a discriminant. -- Note that the iterator may denote a function call in -- qualified form, in which case this check should not -- be performed. if Nkind (Orig_Iter_Name) = N_Selected_Component and then Present (Entity (Selector_Name (Orig_Iter_Name))) and then Ekind_In (Entity (Selector_Name (Orig_Iter_Name)), E_Component, E_Discriminant) and then Is_Dependent_Component_Of_Mutable_Object (Orig_Iter_Name) then Error_Msg_N ("container cannot be a discriminant-dependent " & "component of a mutable object", N); end if; end if; end; end if; -- IN iterator, domain is a range, or a call to Iterate function else -- For an iteration of the form IN, the name must denote an -- iterator, typically the result of a call to Iterate. Give a -- useful error message when the name is a container by itself. -- The type may be a formal container type, which has to have -- an Iterable aspect detailing the required primitives. if Is_Entity_Name (Original_Node (Name (N))) and then not Is_Iterator (Typ) then if Has_Aspect (Typ, Aspect_Iterable) then null; elsif not Has_Aspect (Typ, Aspect_Iterator_Element) then Error_Msg_NE ("cannot iterate over&", Name (N), Typ); else Error_Msg_N ("name must be an iterator, not a container", Name (N)); end if; if Has_Aspect (Typ, Aspect_Iterable) then null; else Error_Msg_NE ("\to iterate directly over the elements of a container, " & "write `of &`", Name (N), Original_Node (Name (N))); -- No point in continuing analysis of iterator spec return; end if; end if; -- If the name is a call (typically prefixed) to some Iterate -- function, it has been rewritten as an object declaration. -- If that object is a selected component, verify that it is not -- a component of an unconstrained mutable object. if Nkind (Iter_Name) = N_Identifier or else (not Expander_Active and Comes_From_Source (Iter_Name)) then declare Orig_Node : constant Node_Id := Original_Node (Iter_Name); Iter_Kind : constant Node_Kind := Nkind (Orig_Node); Obj : Node_Id; begin if Iter_Kind = N_Selected_Component then Obj := Prefix (Orig_Node); elsif Iter_Kind = N_Function_Call then Obj := First_Actual (Orig_Node); -- If neither, the name comes from source else Obj := Iter_Name; end if; if Nkind (Obj) = N_Selected_Component and then Is_Dependent_Component_Of_Mutable_Object (Obj) then Error_Msg_N ("container cannot be a discriminant-dependent " & "component of a mutable object", N); end if; end; end if; -- The result type of Iterate function is the classwide type of -- the interface parent. We need the specific Cursor type defined -- in the container package. We obtain it by name for a predefined -- container, or through the Iterable aspect for a formal one. if Has_Aspect (Typ, Aspect_Iterable) then Set_Etype (Def_Id, Get_Cursor_Type (Parent (Find_Value_Of_Aspect (Typ, Aspect_Iterable)), Typ)); else Set_Etype (Def_Id, Get_Cursor_Type (Typ)); Check_Reverse_Iteration (Etype (Iter_Name)); end if; end if; end if; end Analyze_Iterator_Specification; ------------------- -- Analyze_Label -- ------------------- -- Note: the semantic work required for analyzing labels (setting them as -- reachable) was done in a prepass through the statements in the block, -- so that forward gotos would be properly handled. See Analyze_Statements -- for further details. The only processing required here is to deal with -- optimizations that depend on an assumption of sequential control flow, -- since of course the occurrence of a label breaks this assumption. procedure Analyze_Label (N : Node_Id) is pragma Warnings (Off, N); begin Kill_Current_Values; end Analyze_Label; -------------------------- -- Analyze_Label_Entity -- -------------------------- procedure Analyze_Label_Entity (E : Entity_Id) is begin Set_Ekind (E, E_Label); Set_Etype (E, Standard_Void_Type); Set_Enclosing_Scope (E, Current_Scope); Set_Reachable (E, True); end Analyze_Label_Entity; ------------------------------------------ -- Analyze_Loop_Parameter_Specification -- ------------------------------------------ procedure Analyze_Loop_Parameter_Specification (N : Node_Id) is Loop_Nod : constant Node_Id := Parent (Parent (N)); procedure Check_Controlled_Array_Attribute (DS : Node_Id); -- If the bounds are given by a 'Range reference on a function call -- that returns a controlled array, introduce an explicit declaration -- to capture the bounds, so that the function result can be finalized -- in timely fashion. procedure Check_Predicate_Use (T : Entity_Id); -- Diagnose Attempt to iterate through non-static predicate. Note that -- a type with inherited predicates may have both static and dynamic -- forms. In this case it is not sufficent to check the static predicate -- function only, look for a dynamic predicate aspect as well. function Has_Call_Using_Secondary_Stack (N : Node_Id) return Boolean; -- N is the node for an arbitrary construct. This function searches the -- construct N to see if any expressions within it contain function -- calls that use the secondary stack, returning True if any such call -- is found, and False otherwise. procedure Process_Bounds (R : Node_Id); -- If the iteration is given by a range, create temporaries and -- assignment statements block to capture the bounds and perform -- required finalization actions in case a bound includes a function -- call that uses the temporary stack. We first pre-analyze a copy of -- the range in order to determine the expected type, and analyze and -- resolve the original bounds. -------------------------------------- -- Check_Controlled_Array_Attribute -- -------------------------------------- procedure Check_Controlled_Array_Attribute (DS : Node_Id) is begin if Nkind (DS) = N_Attribute_Reference and then Is_Entity_Name (Prefix (DS)) and then Ekind (Entity (Prefix (DS))) = E_Function and then Is_Array_Type (Etype (Entity (Prefix (DS)))) and then Is_Controlled (Component_Type (Etype (Entity (Prefix (DS))))) and then Expander_Active then declare Loc : constant Source_Ptr := Sloc (N); Arr : constant Entity_Id := Etype (Entity (Prefix (DS))); Indx : constant Entity_Id := Base_Type (Etype (First_Index (Arr))); Subt : constant Entity_Id := Make_Temporary (Loc, 'S'); Decl : Node_Id; begin Decl := Make_Subtype_Declaration (Loc, Defining_Identifier => Subt, Subtype_Indication => Make_Subtype_Indication (Loc, Subtype_Mark => New_Occurrence_Of (Indx, Loc), Constraint => Make_Range_Constraint (Loc, Relocate_Node (DS)))); Insert_Before (Loop_Nod, Decl); Analyze (Decl); Rewrite (DS, Make_Attribute_Reference (Loc, Prefix => New_Occurrence_Of (Subt, Loc), Attribute_Name => Attribute_Name (DS))); Analyze (DS); end; end if; end Check_Controlled_Array_Attribute; ------------------------- -- Check_Predicate_Use -- ------------------------- procedure Check_Predicate_Use (T : Entity_Id) is begin -- A predicated subtype is illegal in loops and related constructs -- if the predicate is not static, or if it is a non-static subtype -- of a statically predicated subtype. if Is_Discrete_Type (T) and then Has_Predicates (T) and then (not Has_Static_Predicate (T) or else not Is_Static_Subtype (T) or else Has_Dynamic_Predicate_Aspect (T)) then -- Seems a confusing message for the case of a static predicate -- with a non-static subtype??? Bad_Predicated_Subtype_Use ("cannot use subtype& with non-static predicate for loop " & "iteration", Discrete_Subtype_Definition (N), T, Suggest_Static => True); elsif Inside_A_Generic and then Is_Generic_Formal (T) and then Is_Discrete_Type (T) then Set_No_Dynamic_Predicate_On_Actual (T); end if; end Check_Predicate_Use; ------------------------------------ -- Has_Call_Using_Secondary_Stack -- ------------------------------------ function Has_Call_Using_Secondary_Stack (N : Node_Id) return Boolean is function Check_Call (N : Node_Id) return Traverse_Result; -- Check if N is a function call which uses the secondary stack ---------------- -- Check_Call -- ---------------- function Check_Call (N : Node_Id) return Traverse_Result is Nam : Node_Id; Subp : Entity_Id; Typ : Entity_Id; begin if Nkind (N) = N_Function_Call then Nam := Name (N); -- Obtain the subprogram being invoked loop if Nkind (Nam) = N_Explicit_Dereference then Nam := Prefix (Nam); elsif Nkind (Nam) = N_Selected_Component then Nam := Selector_Name (Nam); else exit; end if; end loop; Subp := Entity (Nam); Typ := Etype (Subp); if Requires_Transient_Scope (Typ) then return Abandon; elsif Sec_Stack_Needed_For_Return (Subp) then return Abandon; end if; end if; -- Continue traversing the tree return OK; end Check_Call; function Check_Calls is new Traverse_Func (Check_Call); -- Start of processing for Has_Call_Using_Secondary_Stack begin return Check_Calls (N) = Abandon; end Has_Call_Using_Secondary_Stack; -------------------- -- Process_Bounds -- -------------------- procedure Process_Bounds (R : Node_Id) is Loc : constant Source_Ptr := Sloc (N); function One_Bound (Original_Bound : Node_Id; Analyzed_Bound : Node_Id; Typ : Entity_Id) return Node_Id; -- Capture value of bound and return captured value --------------- -- One_Bound -- --------------- function One_Bound (Original_Bound : Node_Id; Analyzed_Bound : Node_Id; Typ : Entity_Id) return Node_Id is Assign : Node_Id; Decl : Node_Id; Id : Entity_Id; begin -- If the bound is a constant or an object, no need for a separate -- declaration. If the bound is the result of previous expansion -- it is already analyzed and should not be modified. Note that -- the Bound will be resolved later, if needed, as part of the -- call to Make_Index (literal bounds may need to be resolved to -- type Integer). if Analyzed (Original_Bound) then return Original_Bound; elsif Nkind_In (Analyzed_Bound, N_Integer_Literal, N_Character_Literal) or else Is_Entity_Name (Analyzed_Bound) then Analyze_And_Resolve (Original_Bound, Typ); return Original_Bound; end if; -- Normally, the best approach is simply to generate a constant -- declaration that captures the bound. However, there is a nasty -- case where this is wrong. If the bound is complex, and has a -- possible use of the secondary stack, we need to generate a -- separate assignment statement to ensure the creation of a block -- which will release the secondary stack. -- We prefer the constant declaration, since it leaves us with a -- proper trace of the value, useful in optimizations that get rid -- of junk range checks. if not Has_Call_Using_Secondary_Stack (Analyzed_Bound) then Analyze_And_Resolve (Original_Bound, Typ); -- Ensure that the bound is valid. This check should not be -- generated when the range belongs to a quantified expression -- as the construct is still not expanded into its final form. if Nkind (Parent (R)) /= N_Loop_Parameter_Specification or else Nkind (Parent (Parent (R))) /= N_Quantified_Expression then Ensure_Valid (Original_Bound); end if; Force_Evaluation (Original_Bound); return Original_Bound; end if; Id := Make_Temporary (Loc, 'R', Original_Bound); -- Here we make a declaration with a separate assignment -- statement, and insert before loop header. Decl := Make_Object_Declaration (Loc, Defining_Identifier => Id, Object_Definition => New_Occurrence_Of (Typ, Loc)); Assign := Make_Assignment_Statement (Loc, Name => New_Occurrence_Of (Id, Loc), Expression => Relocate_Node (Original_Bound)); Insert_Actions (Loop_Nod, New_List (Decl, Assign)); -- Now that this temporary variable is initialized we decorate it -- as safe-to-reevaluate to inform to the backend that no further -- asignment will be issued and hence it can be handled as side -- effect free. Note that this decoration must be done when the -- assignment has been analyzed because otherwise it will be -- rejected (see Analyze_Assignment). Set_Is_Safe_To_Reevaluate (Id); Rewrite (Original_Bound, New_Occurrence_Of (Id, Loc)); if Nkind (Assign) = N_Assignment_Statement then return Expression (Assign); else return Original_Bound; end if; end One_Bound; Hi : constant Node_Id := High_Bound (R); Lo : constant Node_Id := Low_Bound (R); R_Copy : constant Node_Id := New_Copy_Tree (R); New_Hi : Node_Id; New_Lo : Node_Id; Typ : Entity_Id; -- Start of processing for Process_Bounds begin Set_Parent (R_Copy, Parent (R)); Preanalyze_Range (R_Copy); Typ := Etype (R_Copy); -- If the type of the discrete range is Universal_Integer, then the -- bound's type must be resolved to Integer, and any object used to -- hold the bound must also have type Integer, unless the literal -- bounds are constant-folded expressions with a user-defined type. if Typ = Universal_Integer then if Nkind (Lo) = N_Integer_Literal and then Present (Etype (Lo)) and then Scope (Etype (Lo)) /= Standard_Standard then Typ := Etype (Lo); elsif Nkind (Hi) = N_Integer_Literal and then Present (Etype (Hi)) and then Scope (Etype (Hi)) /= Standard_Standard then Typ := Etype (Hi); else Typ := Standard_Integer; end if; end if; Set_Etype (R, Typ); New_Lo := One_Bound (Lo, Low_Bound (R_Copy), Typ); New_Hi := One_Bound (Hi, High_Bound (R_Copy), Typ); -- Propagate staticness to loop range itself, in case the -- corresponding subtype is static. if New_Lo /= Lo and then Is_OK_Static_Expression (New_Lo) then Rewrite (Low_Bound (R), New_Copy (New_Lo)); end if; if New_Hi /= Hi and then Is_OK_Static_Expression (New_Hi) then Rewrite (High_Bound (R), New_Copy (New_Hi)); end if; end Process_Bounds; -- Local variables DS : constant Node_Id := Discrete_Subtype_Definition (N); Id : constant Entity_Id := Defining_Identifier (N); DS_Copy : Node_Id; -- Start of processing for Analyze_Loop_Parameter_Specification begin Enter_Name (Id); -- We always consider the loop variable to be referenced, since the loop -- may be used just for counting purposes. Generate_Reference (Id, N, ' '); -- Check for the case of loop variable hiding a local variable (used -- later on to give a nice warning if the hidden variable is never -- assigned). declare H : constant Entity_Id := Homonym (Id); begin if Present (H) and then Ekind (H) = E_Variable and then Is_Discrete_Type (Etype (H)) and then Enclosing_Dynamic_Scope (H) = Enclosing_Dynamic_Scope (Id) then Set_Hiding_Loop_Variable (H, Id); end if; end; -- Loop parameter specification must include subtype mark in SPARK if Nkind (DS) = N_Range then Check_SPARK_05_Restriction ("loop parameter specification must include subtype mark", N); end if; -- Analyze the subtype definition and create temporaries for the bounds. -- Do not evaluate the range when preanalyzing a quantified expression -- because bounds expressed as function calls with side effects will be -- incorrectly replicated. if Nkind (DS) = N_Range and then Expander_Active and then Nkind (Parent (N)) /= N_Quantified_Expression then Process_Bounds (DS); -- Either the expander not active or the range of iteration is a subtype -- indication, an entity, or a function call that yields an aggregate or -- a container. else DS_Copy := New_Copy_Tree (DS); Set_Parent (DS_Copy, Parent (DS)); Preanalyze_Range (DS_Copy); -- Ada 2012: If the domain of iteration is: -- a) a function call, -- b) an identifier that is not a type, -- c) an attribute reference 'Old (within a postcondition), -- d) an unchecked conversion or a qualified expression with -- the proper iterator type. -- then it is an iteration over a container. It was classified as -- a loop specification by the parser, and must be rewritten now -- to activate container iteration. The last case will occur within -- an expanded inlined call, where the expansion wraps an actual in -- an unchecked conversion when needed. The expression of the -- conversion is always an object. if Nkind (DS_Copy) = N_Function_Call or else (Is_Entity_Name (DS_Copy) and then not Is_Type (Entity (DS_Copy))) or else (Nkind (DS_Copy) = N_Attribute_Reference and then Nam_In (Attribute_Name (DS_Copy), Name_Loop_Entry, Name_Old)) or else Has_Aspect (Etype (DS_Copy), Aspect_Iterable) or else Nkind (DS_Copy) = N_Unchecked_Type_Conversion or else (Nkind (DS_Copy) = N_Qualified_Expression and then Is_Iterator (Etype (DS_Copy))) then -- This is an iterator specification. Rewrite it as such and -- analyze it to capture function calls that may require -- finalization actions. declare I_Spec : constant Node_Id := Make_Iterator_Specification (Sloc (N), Defining_Identifier => Relocate_Node (Id), Name => DS_Copy, Subtype_Indication => Empty, Reverse_Present => Reverse_Present (N)); Scheme : constant Node_Id := Parent (N); begin Set_Iterator_Specification (Scheme, I_Spec); Set_Loop_Parameter_Specification (Scheme, Empty); Analyze_Iterator_Specification (I_Spec); -- In a generic context, analyze the original domain of -- iteration, for name capture. if not Expander_Active then Analyze (DS); end if; -- Set kind of loop parameter, which may be used in the -- subsequent analysis of the condition in a quantified -- expression. Set_Ekind (Id, E_Loop_Parameter); return; end; -- Domain of iteration is not a function call, and is side-effect -- free. else -- A quantified expression that appears in a pre/post condition -- is pre-analyzed several times. If the range is given by an -- attribute reference it is rewritten as a range, and this is -- done even with expansion disabled. If the type is already set -- do not reanalyze, because a range with static bounds may be -- typed Integer by default. if Nkind (Parent (N)) = N_Quantified_Expression and then Present (Etype (DS)) then null; else Analyze (DS); end if; end if; end if; if DS = Error then return; end if; -- Some additional checks if we are iterating through a type if Is_Entity_Name (DS) and then Present (Entity (DS)) and then Is_Type (Entity (DS)) then -- The subtype indication may denote the completion of an incomplete -- type declaration. if Ekind (Entity (DS)) = E_Incomplete_Type then Set_Entity (DS, Get_Full_View (Entity (DS))); Set_Etype (DS, Entity (DS)); end if; Check_Predicate_Use (Entity (DS)); end if; -- Error if not discrete type if not Is_Discrete_Type (Etype (DS)) then Wrong_Type (DS, Any_Discrete); Set_Etype (DS, Any_Type); end if; Check_Controlled_Array_Attribute (DS); if Nkind (DS) = N_Subtype_Indication then Check_Predicate_Use (Entity (Subtype_Mark (DS))); end if; Make_Index (DS, N, In_Iter_Schm => True); Set_Ekind (Id, E_Loop_Parameter); -- A quantified expression which appears in a pre- or post-condition may -- be analyzed multiple times. The analysis of the range creates several -- itypes which reside in different scopes depending on whether the pre- -- or post-condition has been expanded. Update the type of the loop -- variable to reflect the proper itype at each stage of analysis. if No (Etype (Id)) or else Etype (Id) = Any_Type or else (Present (Etype (Id)) and then Is_Itype (Etype (Id)) and then Nkind (Parent (Loop_Nod)) = N_Expression_With_Actions and then Nkind (Original_Node (Parent (Loop_Nod))) = N_Quantified_Expression) then Set_Etype (Id, Etype (DS)); end if; -- Treat a range as an implicit reference to the type, to inhibit -- spurious warnings. Generate_Reference (Base_Type (Etype (DS)), N, ' '); Set_Is_Known_Valid (Id, True); -- The loop is not a declarative part, so the loop variable must be -- frozen explicitly. Do not freeze while preanalyzing a quantified -- expression because the freeze node will not be inserted into the -- tree due to flag Is_Spec_Expression being set. if Nkind (Parent (N)) /= N_Quantified_Expression then declare Flist : constant List_Id := Freeze_Entity (Id, N); begin if Is_Non_Empty_List (Flist) then Insert_Actions (N, Flist); end if; end; end if; -- Case where we have a range or a subtype, get type bounds if Nkind_In (DS, N_Range, N_Subtype_Indication) and then not Error_Posted (DS) and then Etype (DS) /= Any_Type and then Is_Discrete_Type (Etype (DS)) then declare L : Node_Id; H : Node_Id; begin if Nkind (DS) = N_Range then L := Low_Bound (DS); H := High_Bound (DS); else L := Type_Low_Bound (Underlying_Type (Etype (Subtype_Mark (DS)))); H := Type_High_Bound (Underlying_Type (Etype (Subtype_Mark (DS)))); end if; -- Check for null or possibly null range and issue warning. We -- suppress such messages in generic templates and instances, -- because in practice they tend to be dubious in these cases. The -- check applies as well to rewritten array element loops where a -- null range may be detected statically. if Compile_Time_Compare (L, H, Assume_Valid => True) = GT then -- Suppress the warning if inside a generic template or -- instance, since in practice they tend to be dubious in these -- cases since they can result from intended parameterization. if not Inside_A_Generic and then not In_Instance then -- Specialize msg if invalid values could make the loop -- non-null after all. if Compile_Time_Compare (L, H, Assume_Valid => False) = GT then -- Since we know the range of the loop is null, set the -- appropriate flag to remove the loop entirely during -- expansion. Set_Is_Null_Loop (Loop_Nod); if Comes_From_Source (N) then Error_Msg_N ("??loop range is null, loop will not execute", DS); end if; -- Here is where the loop could execute because of -- invalid values, so issue appropriate message and in -- this case we do not set the Is_Null_Loop flag since -- the loop may execute. elsif Comes_From_Source (N) then Error_Msg_N ("??loop range may be null, loop may not execute", DS); Error_Msg_N ("??can only execute if invalid values are present", DS); end if; end if; -- In either case, suppress warnings in the body of the loop, -- since it is likely that these warnings will be inappropriate -- if the loop never actually executes, which is likely. Set_Suppress_Loop_Warnings (Loop_Nod); -- The other case for a warning is a reverse loop where the -- upper bound is the integer literal zero or one, and the -- lower bound may exceed this value. -- For example, we have -- for J in reverse N .. 1 loop -- In practice, this is very likely to be a case of reversing -- the bounds incorrectly in the range. elsif Reverse_Present (N) and then Nkind (Original_Node (H)) = N_Integer_Literal and then (Intval (Original_Node (H)) = Uint_0 or else Intval (Original_Node (H)) = Uint_1) then -- Lower bound may in fact be known and known not to exceed -- upper bound (e.g. reverse 0 .. 1) and that's OK. if Compile_Time_Known_Value (L) and then Expr_Value (L) <= Expr_Value (H) then null; -- Otherwise warning is warranted else Error_Msg_N ("??loop range may be null", DS); Error_Msg_N ("\??bounds may be wrong way round", DS); end if; end if; -- Check if either bound is known to be outside the range of the -- loop parameter type, this is e.g. the case of a loop from -- 20..X where the type is 1..19. -- Such a loop is dubious since either it raises CE or it executes -- zero times, and that cannot be useful! if Etype (DS) /= Any_Type and then not Error_Posted (DS) and then Nkind (DS) = N_Subtype_Indication and then Nkind (Constraint (DS)) = N_Range_Constraint then declare LLo : constant Node_Id := Low_Bound (Range_Expression (Constraint (DS))); LHi : constant Node_Id := High_Bound (Range_Expression (Constraint (DS))); Bad_Bound : Node_Id := Empty; -- Suspicious loop bound begin -- At this stage L, H are the bounds of the type, and LLo -- Lhi are the low bound and high bound of the loop. if Compile_Time_Compare (LLo, L, Assume_Valid => True) = LT or else Compile_Time_Compare (LLo, H, Assume_Valid => True) = GT then Bad_Bound := LLo; end if; if Compile_Time_Compare (LHi, L, Assume_Valid => True) = LT or else Compile_Time_Compare (LHi, H, Assume_Valid => True) = GT then Bad_Bound := LHi; end if; if Present (Bad_Bound) then Error_Msg_N ("suspicious loop bound out of range of " & "loop subtype??", Bad_Bound); Error_Msg_N ("\loop executes zero times or raises " & "Constraint_Error??", Bad_Bound); end if; end; end if; -- This declare block is about warnings, if we get an exception while -- testing for warnings, we simply abandon the attempt silently. This -- most likely occurs as the result of a previous error, but might -- just be an obscure case we have missed. In either case, not giving -- the warning is perfectly acceptable. exception when others => null; end; end if; -- A loop parameter cannot be effectively volatile (SPARK RM 7.1.3(4)). -- This check is relevant only when SPARK_Mode is on as it is not a -- standard Ada legality check. if SPARK_Mode = On and then Is_Effectively_Volatile (Id) then Error_Msg_N ("loop parameter cannot be volatile", Id); end if; end Analyze_Loop_Parameter_Specification; ---------------------------- -- Analyze_Loop_Statement -- ---------------------------- procedure Analyze_Loop_Statement (N : Node_Id) is function Is_Container_Iterator (Iter : Node_Id) return Boolean; -- Given a loop iteration scheme, determine whether it is an Ada 2012 -- container iteration. function Is_Wrapped_In_Block (N : Node_Id) return Boolean; -- Determine whether loop statement N has been wrapped in a block to -- capture finalization actions that may be generated for container -- iterators. Prevents infinite recursion when block is analyzed. -- Routine is a noop if loop is single statement within source block. --------------------------- -- Is_Container_Iterator -- --------------------------- function Is_Container_Iterator (Iter : Node_Id) return Boolean is begin -- Infinite loop if No (Iter) then return False; -- While loop elsif Present (Condition (Iter)) then return False; -- for Def_Id in [reverse] Name loop -- for Def_Id [: Subtype_Indication] of [reverse] Name loop elsif Present (Iterator_Specification (Iter)) then declare Nam : constant Node_Id := Name (Iterator_Specification (Iter)); Nam_Copy : Node_Id; begin Nam_Copy := New_Copy_Tree (Nam); Set_Parent (Nam_Copy, Parent (Nam)); Preanalyze_Range (Nam_Copy); -- The only two options here are iteration over a container or -- an array. return not Is_Array_Type (Etype (Nam_Copy)); end; -- for Def_Id in [reverse] Discrete_Subtype_Definition loop else declare LP : constant Node_Id := Loop_Parameter_Specification (Iter); DS : constant Node_Id := Discrete_Subtype_Definition (LP); DS_Copy : Node_Id; begin DS_Copy := New_Copy_Tree (DS); Set_Parent (DS_Copy, Parent (DS)); Preanalyze_Range (DS_Copy); -- Check for a call to Iterate () or an expression with -- an iterator type. return (Nkind (DS_Copy) = N_Function_Call and then Needs_Finalization (Etype (DS_Copy))) or else Is_Iterator (Etype (DS_Copy)); end; end if; end Is_Container_Iterator; ------------------------- -- Is_Wrapped_In_Block -- ------------------------- function Is_Wrapped_In_Block (N : Node_Id) return Boolean is HSS : Node_Id; Stat : Node_Id; begin -- Check if current scope is a block that is not a transient block. if Ekind (Current_Scope) /= E_Block or else No (Block_Node (Current_Scope)) then return False; else HSS := Handled_Statement_Sequence (Parent (Block_Node (Current_Scope))); -- Skip leading pragmas that may be introduced for invariant and -- predicate checks. Stat := First (Statements (HSS)); while Present (Stat) and then Nkind (Stat) = N_Pragma loop Stat := Next (Stat); end loop; return Stat = N and then No (Next (Stat)); end if; end Is_Wrapped_In_Block; -- Local declarations Id : constant Node_Id := Identifier (N); Iter : constant Node_Id := Iteration_Scheme (N); Loc : constant Source_Ptr := Sloc (N); Ent : Entity_Id; Stmt : Node_Id; -- Start of processing for Analyze_Loop_Statement begin if Present (Id) then -- Make name visible, e.g. for use in exit statements. Loop labels -- are always considered to be referenced. Analyze (Id); Ent := Entity (Id); -- Guard against serious error (typically, a scope mismatch when -- semantic analysis is requested) by creating loop entity to -- continue analysis. if No (Ent) then if Total_Errors_Detected /= 0 then Ent := New_Internal_Entity (E_Loop, Current_Scope, Loc, 'L'); else raise Program_Error; end if; -- Verify that the loop name is hot hidden by an unrelated -- declaration in an inner scope. elsif Ekind (Ent) /= E_Label and then Ekind (Ent) /= E_Loop then Error_Msg_Sloc := Sloc (Ent); Error_Msg_N ("implicit label declaration for & is hidden#", Id); if Present (Homonym (Ent)) and then Ekind (Homonym (Ent)) = E_Label then Set_Entity (Id, Ent); Set_Ekind (Ent, E_Loop); end if; else Generate_Reference (Ent, N, ' '); Generate_Definition (Ent); -- If we found a label, mark its type. If not, ignore it, since it -- means we have a conflicting declaration, which would already -- have been diagnosed at declaration time. Set Label_Construct -- of the implicit label declaration, which is not created by the -- parser for generic units. if Ekind (Ent) = E_Label then Set_Ekind (Ent, E_Loop); if Nkind (Parent (Ent)) = N_Implicit_Label_Declaration then Set_Label_Construct (Parent (Ent), N); end if; end if; end if; -- Case of no identifier present. Create one and attach it to the -- loop statement for use as a scope and as a reference for later -- expansions. Indicate that the label does not come from source, -- and attach it to the loop statement so it is part of the tree, -- even without a full declaration. else Ent := New_Internal_Entity (E_Loop, Current_Scope, Loc, 'L'); Set_Etype (Ent, Standard_Void_Type); Set_Identifier (N, New_Occurrence_Of (Ent, Loc)); Set_Parent (Ent, N); Set_Has_Created_Identifier (N); end if; -- If the iterator specification has a syntactic error, transform -- construct into an infinite loop to prevent a crash and perform -- some analysis. if Present (Iter) and then Present (Iterator_Specification (Iter)) and then Error_Posted (Iterator_Specification (Iter)) then Set_Iteration_Scheme (N, Empty); Analyze (N); return; end if; -- Iteration over a container in Ada 2012 involves the creation of a -- controlled iterator object. Wrap the loop in a block to ensure the -- timely finalization of the iterator and release of container locks. -- The same applies to the use of secondary stack when obtaining an -- iterator. if Ada_Version >= Ada_2012 and then Is_Container_Iterator (Iter) and then not Is_Wrapped_In_Block (N) then declare Block_Nod : Node_Id; Block_Id : Entity_Id; begin Block_Nod := Make_Block_Statement (Loc, Declarations => New_List, Handled_Statement_Sequence => Make_Handled_Sequence_Of_Statements (Loc, Statements => New_List (Relocate_Node (N)))); Add_Block_Identifier (Block_Nod, Block_Id); -- The expansion of iterator loops generates an iterator in order -- to traverse the elements of a container: -- Iter : := Iterate (Container)'reference; -- The iterator is controlled and returned on the secondary stack. -- The analysis of the call to Iterate establishes a transient -- scope to deal with the secondary stack management, but never -- really creates a physical block as this would kill the iterator -- too early (see Wrap_Transient_Declaration). To address this -- case, mark the generated block as needing secondary stack -- management. Set_Uses_Sec_Stack (Block_Id); Rewrite (N, Block_Nod); Analyze (N); return; end; end if; -- Kill current values on entry to loop, since statements in the body of -- the loop may have been executed before the loop is entered. Similarly -- we kill values after the loop, since we do not know that the body of -- the loop was executed. Kill_Current_Values; Push_Scope (Ent); Analyze_Iteration_Scheme (Iter); -- Check for following case which merits a warning if the type E of is -- a multi-dimensional array (and no explicit subscript ranges present). -- for J in E'Range -- for K in E'Range if Present (Iter) and then Present (Loop_Parameter_Specification (Iter)) then declare LPS : constant Node_Id := Loop_Parameter_Specification (Iter); DSD : constant Node_Id := Original_Node (Discrete_Subtype_Definition (LPS)); begin if Nkind (DSD) = N_Attribute_Reference and then Attribute_Name (DSD) = Name_Range and then No (Expressions (DSD)) then declare Typ : constant Entity_Id := Etype (Prefix (DSD)); begin if Is_Array_Type (Typ) and then Number_Dimensions (Typ) > 1 and then Nkind (Parent (N)) = N_Loop_Statement and then Present (Iteration_Scheme (Parent (N))) then declare OIter : constant Node_Id := Iteration_Scheme (Parent (N)); OLPS : constant Node_Id := Loop_Parameter_Specification (OIter); ODSD : constant Node_Id := Original_Node (Discrete_Subtype_Definition (OLPS)); begin if Nkind (ODSD) = N_Attribute_Reference and then Attribute_Name (ODSD) = Name_Range and then No (Expressions (ODSD)) and then Etype (Prefix (ODSD)) = Typ then Error_Msg_Sloc := Sloc (ODSD); Error_Msg_N ("inner range same as outer range#??", DSD); end if; end; end if; end; end if; end; end if; -- Analyze the statements of the body except in the case of an Ada 2012 -- iterator with the expander active. In this case the expander will do -- a rewrite of the loop into a while loop. We will then analyze the -- loop body when we analyze this while loop. -- We need to do this delay because if the container is for indefinite -- types the actual subtype of the components will only be determined -- when the cursor declaration is analyzed. -- If the expander is not active then we want to analyze the loop body -- now even in the Ada 2012 iterator case, since the rewriting will not -- be done. Insert the loop variable in the current scope, if not done -- when analysing the iteration scheme. Set its kind properly to detect -- improper uses in the loop body. -- In GNATprove mode, we do one of the above depending on the kind of -- loop. If it is an iterator over an array, then we do not analyze the -- loop now. We will analyze it after it has been rewritten by the -- special SPARK expansion which is activated in GNATprove mode. We need -- to do this so that other expansions that should occur in GNATprove -- mode take into account the specificities of the rewritten loop, in -- particular the introduction of a renaming (which needs to be -- expanded). -- In other cases in GNATprove mode then we want to analyze the loop -- body now, since no rewriting will occur. Within a generic the -- GNATprove mode is irrelevant, we must analyze the generic for -- non-local name capture. if Present (Iter) and then Present (Iterator_Specification (Iter)) then if GNATprove_Mode and then Is_Iterator_Over_Array (Iterator_Specification (Iter)) and then not Inside_A_Generic then null; elsif not Expander_Active then declare I_Spec : constant Node_Id := Iterator_Specification (Iter); Id : constant Entity_Id := Defining_Identifier (I_Spec); begin if Scope (Id) /= Current_Scope then Enter_Name (Id); end if; -- In an element iterator, The loop parameter is a variable if -- the domain of iteration (container or array) is a variable. if not Of_Present (I_Spec) or else not Is_Variable (Name (I_Spec)) then Set_Ekind (Id, E_Loop_Parameter); end if; end; Analyze_Statements (Statements (N)); end if; else -- Pre-Ada2012 for-loops and while loops Analyze_Statements (Statements (N)); end if; -- When the iteration scheme of a loop contains attribute 'Loop_Entry, -- the loop is transformed into a conditional block. Retrieve the loop. Stmt := N; if Subject_To_Loop_Entry_Attributes (Stmt) then Stmt := Find_Loop_In_Conditional_Block (Stmt); end if; -- Finish up processing for the loop. We kill all current values, since -- in general we don't know if the statements in the loop have been -- executed. We could do a bit better than this with a loop that we -- know will execute at least once, but it's not worth the trouble and -- the front end is not in the business of flow tracing. Process_End_Label (Stmt, 'e', Ent); End_Scope; Kill_Current_Values; -- Check for infinite loop. Skip check for generated code, since it -- justs waste time and makes debugging the routine called harder. -- Note that we have to wait till the body of the loop is fully analyzed -- before making this call, since Check_Infinite_Loop_Warning relies on -- being able to use semantic visibility information to find references. if Comes_From_Source (Stmt) then Check_Infinite_Loop_Warning (Stmt); end if; -- Code after loop is unreachable if the loop has no WHILE or FOR and -- contains no EXIT statements within the body of the loop. if No (Iter) and then not Has_Exit (Ent) then Check_Unreachable_Code (Stmt); end if; end Analyze_Loop_Statement; ---------------------------- -- Analyze_Null_Statement -- ---------------------------- -- Note: the semantics of the null statement is implemented by a single -- null statement, too bad everything isn't as simple as this. procedure Analyze_Null_Statement (N : Node_Id) is pragma Warnings (Off, N); begin null; end Analyze_Null_Statement; ------------------------- -- Analyze_Target_Name -- ------------------------- procedure Analyze_Target_Name (N : Node_Id) is begin -- A target name has the type of the left-hand side of the enclosing -- assignment. Set_Etype (N, Etype (Name (Current_Assignment))); end Analyze_Target_Name; ------------------------ -- Analyze_Statements -- ------------------------ procedure Analyze_Statements (L : List_Id) is Lab : Entity_Id; S : Node_Id; begin -- The labels declared in the statement list are reachable from -- statements in the list. We do this as a prepass so that any goto -- statement will be properly flagged if its target is not reachable. -- This is not required, but is nice behavior. S := First (L); while Present (S) loop if Nkind (S) = N_Label then Analyze (Identifier (S)); Lab := Entity (Identifier (S)); -- If we found a label mark it as reachable if Ekind (Lab) = E_Label then Generate_Definition (Lab); Set_Reachable (Lab); if Nkind (Parent (Lab)) = N_Implicit_Label_Declaration then Set_Label_Construct (Parent (Lab), S); end if; -- If we failed to find a label, it means the implicit declaration -- of the label was hidden. A for-loop parameter can do this to -- a label with the same name inside the loop, since the implicit -- label declaration is in the innermost enclosing body or block -- statement. else Error_Msg_Sloc := Sloc (Lab); Error_Msg_N ("implicit label declaration for & is hidden#", Identifier (S)); end if; end if; Next (S); end loop; -- Perform semantic analysis on all statements Conditional_Statements_Begin; S := First (L); while Present (S) loop Analyze (S); -- Remove dimension in all statements Remove_Dimension_In_Statement (S); Next (S); end loop; Conditional_Statements_End; -- Make labels unreachable. Visibility is not sufficient, because labels -- in one if-branch for example are not reachable from the other branch, -- even though their declarations are in the enclosing declarative part. S := First (L); while Present (S) loop if Nkind (S) = N_Label then Set_Reachable (Entity (Identifier (S)), False); end if; Next (S); end loop; end Analyze_Statements; ---------------------------- -- Check_Unreachable_Code -- ---------------------------- procedure Check_Unreachable_Code (N : Node_Id) is Error_Node : Node_Id; P : Node_Id; begin if Is_List_Member (N) and then Comes_From_Source (N) then declare Nxt : Node_Id; begin Nxt := Original_Node (Next (N)); -- Skip past pragmas while Nkind (Nxt) = N_Pragma loop Nxt := Original_Node (Next (Nxt)); end loop; -- If a label follows us, then we never have dead code, since -- someone could branch to the label, so we just ignore it, unless -- we are in formal mode where goto statements are not allowed. if Nkind (Nxt) = N_Label and then not Restriction_Check_Required (SPARK_05) then return; -- Otherwise see if we have a real statement following us elsif Present (Nxt) and then Comes_From_Source (Nxt) and then Is_Statement (Nxt) then -- Special very annoying exception. If we have a return that -- follows a raise, then we allow it without a warning, since -- the Ada RM annoyingly requires a useless return here. if Nkind (Original_Node (N)) /= N_Raise_Statement or else Nkind (Nxt) /= N_Simple_Return_Statement then -- The rather strange shenanigans with the warning message -- here reflects the fact that Kill_Dead_Code is very good -- at removing warnings in deleted code, and this is one -- warning we would prefer NOT to have removed. Error_Node := Nxt; -- If we have unreachable code, analyze and remove the -- unreachable code, since it is useless and we don't -- want to generate junk warnings. -- We skip this step if we are not in code generation mode -- or CodePeer mode. -- This is the one case where we remove dead code in the -- semantics as opposed to the expander, and we do not want -- to remove code if we are not in code generation mode, -- since this messes up the ASIS trees or loses useful -- information in the CodePeer tree. -- Note that one might react by moving the whole circuit to -- exp_ch5, but then we lose the warning in -gnatc mode. if Operating_Mode = Generate_Code and then not CodePeer_Mode then loop Nxt := Next (N); -- Quit deleting when we have nothing more to delete -- or if we hit a label (since someone could transfer -- control to a label, so we should not delete it). exit when No (Nxt) or else Nkind (Nxt) = N_Label; -- Statement/declaration is to be deleted Analyze (Nxt); Remove (Nxt); Kill_Dead_Code (Nxt); end loop; end if; -- Now issue the warning (or error in formal mode) if Restriction_Check_Required (SPARK_05) then Check_SPARK_05_Restriction ("unreachable code is not allowed", Error_Node); else Error_Msg ("??unreachable code!", Sloc (Error_Node), Error_Node); end if; end if; -- If the unconditional transfer of control instruction is the -- last statement of a sequence, then see if our parent is one of -- the constructs for which we count unblocked exits, and if so, -- adjust the count. else P := Parent (N); -- Statements in THEN part or ELSE part of IF statement if Nkind (P) = N_If_Statement then null; -- Statements in ELSIF part of an IF statement elsif Nkind (P) = N_Elsif_Part then P := Parent (P); pragma Assert (Nkind (P) = N_If_Statement); -- Statements in CASE statement alternative elsif Nkind (P) = N_Case_Statement_Alternative then P := Parent (P); pragma Assert (Nkind (P) = N_Case_Statement); -- Statements in body of block elsif Nkind (P) = N_Handled_Sequence_Of_Statements and then Nkind (Parent (P)) = N_Block_Statement then -- The original loop is now placed inside a block statement -- due to the expansion of attribute 'Loop_Entry. Return as -- this is not a "real" block for the purposes of exit -- counting. if Nkind (N) = N_Loop_Statement and then Subject_To_Loop_Entry_Attributes (N) then return; end if; -- Statements in exception handler in a block elsif Nkind (P) = N_Exception_Handler and then Nkind (Parent (P)) = N_Handled_Sequence_Of_Statements and then Nkind (Parent (Parent (P))) = N_Block_Statement then null; -- None of these cases, so return else return; end if; -- This was one of the cases we are looking for (i.e. the -- parent construct was IF, CASE or block) so decrement count. Unblocked_Exit_Count := Unblocked_Exit_Count - 1; end if; end; end if; end Check_Unreachable_Code; ---------------------- -- Preanalyze_Range -- ---------------------- procedure Preanalyze_Range (R_Copy : Node_Id) is Save_Analysis : constant Boolean := Full_Analysis; Typ : Entity_Id; begin Full_Analysis := False; Expander_Mode_Save_And_Set (False); -- In addition to the above we must ecplicity suppress the -- generation of freeze nodes which might otherwise be generated -- during resolution of the range (e.g. if given by an attribute -- that will freeze its prefix). Set_Must_Not_Freeze (R_Copy); if Nkind (R_Copy) = N_Attribute_Reference then Set_Must_Not_Freeze (Prefix (R_Copy)); end if; Analyze (R_Copy); if Nkind (R_Copy) in N_Subexpr and then Is_Overloaded (R_Copy) then -- Apply preference rules for range of predefined integer types, or -- check for array or iterable construct for "of" iterator, or -- diagnose true ambiguity. declare I : Interp_Index; It : Interp; Found : Entity_Id := Empty; begin Get_First_Interp (R_Copy, I, It); while Present (It.Typ) loop if Is_Discrete_Type (It.Typ) then if No (Found) then Found := It.Typ; else if Scope (Found) = Standard_Standard then null; elsif Scope (It.Typ) = Standard_Standard then Found := It.Typ; else -- Both of them are user-defined Error_Msg_N ("ambiguous bounds in range of iteration", R_Copy); Error_Msg_N ("\possible interpretations:", R_Copy); Error_Msg_NE ("\\} ", R_Copy, Found); Error_Msg_NE ("\\} ", R_Copy, It.Typ); exit; end if; end if; elsif Nkind (Parent (R_Copy)) = N_Iterator_Specification and then Of_Present (Parent (R_Copy)) then if Is_Array_Type (It.Typ) or else Has_Aspect (It.Typ, Aspect_Iterator_Element) or else Has_Aspect (It.Typ, Aspect_Constant_Indexing) or else Has_Aspect (It.Typ, Aspect_Variable_Indexing) then if No (Found) then Found := It.Typ; Set_Etype (R_Copy, It.Typ); else Error_Msg_N ("ambiguous domain of iteration", R_Copy); end if; end if; end if; Get_Next_Interp (I, It); end loop; end; end if; -- Subtype mark in iteration scheme if Is_Entity_Name (R_Copy) and then Is_Type (Entity (R_Copy)) then null; -- Expression in range, or Ada 2012 iterator elsif Nkind (R_Copy) in N_Subexpr then Resolve (R_Copy); Typ := Etype (R_Copy); if Is_Discrete_Type (Typ) then null; -- Check that the resulting object is an iterable container elsif Has_Aspect (Typ, Aspect_Iterator_Element) or else Has_Aspect (Typ, Aspect_Constant_Indexing) or else Has_Aspect (Typ, Aspect_Variable_Indexing) then null; -- The expression may yield an implicit reference to an iterable -- container. Insert explicit dereference so that proper type is -- visible in the loop. elsif Has_Implicit_Dereference (Etype (R_Copy)) then declare Disc : Entity_Id; begin Disc := First_Discriminant (Typ); while Present (Disc) loop if Has_Implicit_Dereference (Disc) then Build_Explicit_Dereference (R_Copy, Disc); exit; end if; Next_Discriminant (Disc); end loop; end; end if; end if; Expander_Mode_Restore; Full_Analysis := Save_Analysis; end Preanalyze_Range; end Sem_Ch5;