------------------------------------------------------------------------------ -- -- -- GNAT COMPILER COMPONENTS -- -- -- -- E X P _ C H 7 -- -- -- -- B o d y -- -- -- -- Copyright (C) 1992-2024, Free Software Foundation, Inc. -- -- -- -- GNAT is free software; you can redistribute it and/or modify it under -- -- terms of the GNU General Public License as published by the Free Soft- -- -- ware Foundation; either version 3, or (at your option) any later ver- -- -- sion. GNAT is distributed in the hope that it will be useful, but WITH- -- -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -- -- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -- -- for more details. You should have received a copy of the GNU General -- -- Public License distributed with GNAT; see file COPYING3. If not, go to -- -- http://www.gnu.org/licenses for a complete copy of the license. -- -- -- -- GNAT was originally developed by the GNAT team at New York University. -- -- Extensive contributions were provided by Ada Core Technologies Inc. -- -- -- ------------------------------------------------------------------------------ -- This package contains virtually all expansion mechanisms related to -- - controlled types -- - transient scopes with Atree; use Atree; with Debug; use Debug; with Einfo; use Einfo; with Einfo.Entities; use Einfo.Entities; with Einfo.Utils; use Einfo.Utils; with Elists; use Elists; with Errout; use Errout; with Exp_Ch6; use Exp_Ch6; with Exp_Ch9; use Exp_Ch9; with Exp_Ch11; use Exp_Ch11; with Exp_Dbug; use Exp_Dbug; with Exp_Dist; use Exp_Dist; with Exp_Disp; use Exp_Disp; with Exp_Prag; use Exp_Prag; with Exp_Tss; use Exp_Tss; with Exp_Util; use Exp_Util; with Freeze; use Freeze; with GNAT_CUDA; use GNAT_CUDA; with Lib; use Lib; with Nlists; use Nlists; with Nmake; use Nmake; with Opt; use Opt; with Output; use Output; with Restrict; use Restrict; with Rident; use Rident; with Rtsfind; use Rtsfind; with Sinfo; use Sinfo; with Sinfo.Nodes; use Sinfo.Nodes; with Sinfo.Utils; use Sinfo.Utils; with Sem; use Sem; with Sem_Aux; use Sem_Aux; with Sem_Ch7; use Sem_Ch7; with Sem_Ch8; use Sem_Ch8; with Sem_Res; use Sem_Res; with Sem_Util; use Sem_Util; with Snames; use Snames; with Stand; use Stand; with Tbuild; use Tbuild; with Ttypes; use Ttypes; with Uintp; use Uintp; package body Exp_Ch7 is ----------------------------- -- Finalization Management -- ----------------------------- -- This paragraph describes how Initialization/Adjustment/Finalization -- procedures are generated and called. Two cases must be considered: types -- that are controlled (Is_Controlled flag set) and composite types that -- contain controlled components (Has_Controlled_Component flag set). In -- the first case the procedures to call are the user-defined primitive -- operations Initialize/Adjust/Finalize. In the second case, the compiler -- generates Deep_Initialize, Deep_Adjust and Deep_Finalize that are in -- charge of calling the former procedures on the controlled components. -- Initialize calls: they are generated for either declarations or dynamic -- allocations of controlled objects with no initial value. They are always -- followed by an attachment to some finalization chain. For the dynamic -- dynamic allocation case, this is the collection attached to the access -- type definition; otherwise, this is the master of the current scope. -- Adjust calls: they are generated on two occasions: (1) for declarations -- or dynamic allocations of controlled objects with an initial value (with -- the exception of function calls), (2) after an assignment. In the first -- case they are followed by an attachment to the finalization chain, in -- the second case they are not. -- Finalization calls: they are generated on three occasions: (1) on scope -- exit, (2) assignments, (3) unchecked deallocations. In case (3) objects -- have to be detached from the finalization chain, in case (2) they must -- not and in case (1) this is optional as we are exiting the scope anyway. -- There are two kinds of finalization chain to which objects are attached, -- depending on the way they are created. For objects (statically) declared -- in a scope, the finalization chain is that of the master of the scope, -- which is embodied in a Finalization_Master object. As per RM 7.6.1(11/3) -- the finalization of the master (on scope exit) performs the finalization -- of objects attached to its chain in the reverse order of their creation. -- For dynamically allocated objects, the finalization chain is that of the -- finalization collection of the access type through which the objects are -- allocated, which is embodied in a Finalization_Collection object. As per -- RM 7.6.1(11.1/3), the finalization of the collection performs the -- finalization of objects attached to its chain in an arbitrary order. -- A Finalization_Collection object is implemented as a controlled object -- and its finalization is therefore driven by the finalization master of -- the scope where it is declared. As per RM 7.6.1(11.2/3), for a named -- access type, the Finalization_Collection object is declared in the list -- of actions of its freeze node. -- ??? For an anonymous access type, the implementation deviates from the -- RM 7.6.1 clause as follows: all the anonymous access types with the same -- designated type that are (implicitly) declared in a library unit share a -- single Finalization_Collection object declared in the outermost scope of -- the library unit, except if the designated type is declared in a dynamic -- scope nested in the unit; in this case no Finalization_Collection object -- is created. As a result, in the first case, objects allocated through -- the anonymous access types are finalized when the library unit goes out -- of scope, while in the second case, they are not finalized at all. -- Here is a simple example of the expansion of a controlled block: -- declare -- X : Ctrl; -- Y : Ctrl := Init; -- type Rec is record -- C : Ctrl; -- end record; -- W : Rec; -- Z : Rec := Init; -- begin -- X := Y; -- W := Z; -- end; -- -- is expanded into: -- -- declare -- Mnn : System.Finalization_Primitives.Finalization_Master; -- XMN : aliased System.Finalization_Primitives.Master_Node; -- X : Ctrl; -- Bnn : begin -- Abort_Defer; -- Initialize (X); -- System.Finalization_Primitives.Attach_To_Master -- (X'address, -- CtrlFD'unrestricted_access, -- XMN'unrestricted_access, -- Mnn); -- at end -- Abort_Undefer; -- end Bnn; -- YMN : aliased System.Finalization_Primitives.Master_Node; -- Y : Ctrl := Init; -- System.Finalization_Primitives.Attach_To_Master -- (Y'address, -- CtrlFD'unrestricted_access, -- YMN'unrestricted_access, -- Mnn); -- type Rec is record -- C : Ctrl; -- end record; -- WMN : aliased System.Finalization_Primitives.Master_Node; -- W : Rec; -- Bnn : begin -- Abort_Defer; -- Bnn : begin -- Deep_Initialize (W); -- System.Finalization_Primitives.Attach_To_Master -- (W'address, -- Rec_FD'unrestricted_access, -- WMN'unrestricted_access, -- Mnn); -- exception -- when others => -- Deep_Finalize (W); -- end Bnn; -- at end -- Abort_Undefer; -- end Bnn; -- ZMN : aliaed System.Finalization_Primitives.Master_Node; -- Z : Rec := Init; -- System.Finalization_Primitives.Attach_To_Master -- (Z'address, -- Rec_FD'unrestricted_access, -- ZMN'unrestricted_access, -- Mnn); -- procedure _Finalizer is -- Ann : constant Boolean := Ada.Exceptions.Triggered_By_Abort; -- Rnn : boolean := False; -- begin -- Abort_Defer; -- Bnn : begin -- System.Finalization_Primitives.Finalize_Master (Mnn); -- exceptions -- when others => -- Rnn := True; -- end Bnn; -- Abort_Undefer; -- if Rnn and then not Ann then -- [program_error "finalize raised exception"] -- end if; -- end _Finalizer; -- begin -- _Assign (X, Y); -- Deep_Finalize (W); -- W := Z; -- Deep_Adjust (W); -- end; -- at end -- _Finalizer; -- In the case of a block containing a single controlled object, the master -- degenerates into a single master node: -- declare -- X : Ctrl := Init; -- begin -- null; -- end; -- is expanded into: -- declare -- XMN : aliased System.Finalization_Primitives.Master_Node; -- X : Ctrl := Init; -- System.Finalization_Primitives.Attach_To_Node -- (X'address, -- CtrlFD'unrestricted_access, -- XMN'unrestricted_access); -- procedure _Finalizer is -- Ann : constant Boolean := Ada.Exceptions.Triggered_By_Abort; -- Rnn : boolean := False; -- begin -- Abort_Defer; -- Bnn : begin -- System.Finalization_Primitives.Finalize_Object (XMN); -- exceptions -- when others => -- Rnn := True; -- end Bnn; -- Abort_Undefer; -- if Rnn and then not Ann then -- [program_error "finalize raised exception"] -- end if; -- end _Finalizer; -- begin -- null; -- end; -- at end -- _Finalizer; -- Here is the version with a dynamically allocated object: -- declare -- X : P_Ctrl := new Ctrl; -- begin -- null; -- end; -- -- is expanded into: -- declare -- Cnn : System.Finalization_Primitives.Finalization_Collection_Ptr := -- P_CtrlFC'unrestricted_access; -- [...] -- Pnn : constant P_Ctrl := new Ctrl[...][...]; -- Bnn : begin -- Abort_Defer; -- Initialize (Pnn.all); -- System.Finalization_Primitives.Attach_To_Collection -- (Pnn.all'address, -- CtrlFD'unrestricted_access, -- Cnn.all); -- at end -- Abort_Undefer; -- end Bnn; -- X : P_Ctrl := Pnn; -- The implementation uses two different strategies for the finalization -- of (statically) declared objects and of dynamically allocated objects. -- For (statically) declared objects, the attachment to the finalization -- chain of the current scope and the call to the finalization procedure -- are generated during a post-processing phase of the expansion. These -- objects are first spotted in declarative parts and statement lists by -- Requires_Cleanup_Actions; then Build_Finalizer is called on the parent -- node to generate both the attachment and the finalization actions. -- This post processing is fully transparent for the rest of the expansion -- activities, in other words those have nothing to do or to care about. -- However this default processing may not be sufficient in specific cases, -- e.g. for the return object of an extended return statement in a function -- whose result type is controlled: in this case, the return object must be -- finalized only if the function returns abnormally. In order to deal with -- these cases, it is possible to directly generate detachment actions (for -- the return object case) or finalization actions (for transient objects) -- during the rest of expansion activities. -- These direct actions must be signalled to the post-processing machinery -- and this is achieved through the handling of Master_Node objects, which -- are the items actually chained in the finalization chains of masters. -- With the default processing, they are created by Build_Finalizer for the -- controlled objects spotted by Requires_Cleanup_Actions. But when direct -- actions are carried out, they are generated by these actions and later -- recognized by Requires_Cleanup_Actions and picked up by Build_Finalizer. -- For dynamically allocated objects, there is no post-processing phase and -- the attachment to the finalization chain of the access type, as well the -- the detachment from this chain for unchecked deallocation, are generated -- directly by the compiler during the expansion of allocators and calls to -- instances of the Unchecked_Deallocation procedure. type Final_Primitives is (Initialize_Case, Adjust_Case, Finalize_Case, Address_Case); -- This enumeration type is defined in order to ease sharing code for -- building finalization procedures for composite types. Name_Of : constant array (Final_Primitives) of Name_Id := (Initialize_Case => Name_Initialize, Adjust_Case => Name_Adjust, Finalize_Case => Name_Finalize, Address_Case => Name_Finalize_Address); Deep_Name_Of : constant array (Final_Primitives) of TSS_Name_Type := (Initialize_Case => TSS_Deep_Initialize, Adjust_Case => TSS_Deep_Adjust, Finalize_Case => TSS_Deep_Finalize, Address_Case => TSS_Finalize_Address); function Allows_Finalization_Collection (Typ : Entity_Id) return Boolean; -- Determine whether access type Typ may have a finalization collection procedure Build_Array_Deep_Procs (Typ : Entity_Id); -- Build the deep Initialize/Adjust/Finalize for a record Typ with -- Has_Controlled_Component set and store them using the TSS mechanism. function Build_Cleanup_Statements (N : Node_Id; Additional_Cleanup : List_Id) return List_Id; -- Create the cleanup calls for an asynchronous call block, task master, -- protected subprogram body, task allocation block or task body, or -- additional cleanup actions parked on a transient block. If the context -- does not contain the above constructs, the routine returns an empty -- list. procedure Build_Finalizer_Call (N : Node_Id; Fin_Id : Entity_Id); -- N is a construct that contains a handled sequence of statements, Fin_Id -- is the entity of a finalizer. Create an At_End handler that covers the -- statements of N and calls Fin_Id. If the handled statement sequence has -- an exception handler, the statements will be wrapped in a block to avoid -- unwanted interaction with the new At_End handler. procedure Build_Record_Deep_Procs (Typ : Entity_Id); -- Build the deep Initialize/Adjust/Finalize for a record Typ with -- Has_Component_Component set and store them using the TSS mechanism. -------------------------------- -- Transient Scope Management -- -------------------------------- -- A transient scope is needed when certain temporary objects are created -- by the compiler. These temporary objects are allocated on the secondary -- stack and/or need finalization, and the transient scope is responsible -- for finalizing the objects and reclaiming the memory of the secondary -- stack at the appropriate time. They are generally objects allocated to -- store the result of a function returning an unconstrained or controlled -- value. Expressions needing to be wrapped in a transient scope may appear -- in three different contexts, which lead to different kinds of transient -- scope expansion: -- 1. In a simple statement (procedure call, assignment, ...). In this -- case the statement is wrapped into a transient block, which takes -- care of the finalization actions as well as the secondary stack -- deallocation, See Wrap_Transient_Statement for details. -- 2. In an expression of a control structure (test in a If statement, -- expression in a Case statement, ...). In this case the expression -- is replaced by a temporary and the enclosing statement is wrapped -- into a transient block, which takes care of the finalization actions -- and the secondary stack deallocation. See Wrap_Transient_Expression -- for details. -- 3. In an expression of an object declaration. No wrapping is possible -- here, so the finalization actions performed on the normal path, if -- any, are done right after the declaration, and those performed on -- the exceptional path, as well as the secondary stack deallocation, -- are deferred to the enclosing scope. See Wrap_Transient_Declaration -- for details. -- A transient scope is created by calling Establish_Transient_Scope on the -- node that needs to be serviced by it (the serviced node can subsequently -- be retrieved by invoking Node_To_Be_Wrapped when the current scope is a -- transient scope). Once this has been done, the normal processing of the -- Insert_Actions procedures is blocked and the procedures are redirected -- to the Store_xxx_Actions_In_Scope procedures and Store_Actions_In_Scope -- is ultimately invoked to store the pending actions. -- A transient scope is finalized by calling one of the Wrap_Transient_xxx -- procedures depending on the context as explained above. They ultimately -- invoke Insert_Actions_In_Scope_Around as per the following picture: -- Wrap_Transient_Expression Wrap_Transient_Statement -- | | -- V V -- Make_Transient_Block -- | -- Wrap_Transient_Declaration | -- | | -- V V -- Insert_Actions_In_Scope_Around procedure Insert_Actions_In_Scope_Around (N : Node_Id; Clean : Boolean; Manage_SS : Boolean); -- Insert the before-actions kept in the scope stack before N, and the -- after-actions after N, which must be a member of a list. If Clean is -- true, insert any cleanup actions kept in the scope stack and generate -- required finalization actions for the before-actions and after-actions. -- If Manage_SS is true, insert calls to mark/release the secondary stack. function Make_Transient_Block (Loc : Source_Ptr; Action : Node_Id; Par : Node_Id) return Node_Id; -- Action is a single statement or object declaration. Par is the proper -- parent of the generated block. Create a transient block whose name is -- the current scope and the only handled statement is Action. If Action -- involves controlled objects or secondary stack usage, the corresponding -- cleanup actions are performed at the end of the block. procedure Store_Actions_In_Scope (AK : Scope_Action_Kind; L : List_Id); -- Shared processing for Store_xxx_Actions_In_Scope ------------------------------------------- -- Unnesting procedures for CCG and LLVM -- ------------------------------------------- -- Expansion generates subprograms for controlled types management that -- may appear in declarative lists in package declarations and bodies. -- These subprograms appear within generated blocks that contain local -- declarations and a call to finalization procedures. To ensure that -- such subprograms get activation records when needed, we transform the -- block into a procedure body, followed by a call to it in the same -- declarative list. procedure Check_Unnesting_Elaboration_Code (N : Node_Id); -- The statement part of a package body that is a compilation unit may -- contain blocks that declare local subprograms. In Subprogram_Unnesting_ -- Mode such subprograms must be handled as nested inside the (implicit) -- elaboration procedure that executes that statement part. To handle -- properly uplevel references we construct that subprogram explicitly, -- to contain blocks and inner subprograms, the statement part becomes -- a call to this subprogram. This is only done if blocks are present -- in the statement list of the body. (It would be nice to unify this -- procedure with Check_Unnesting_In_Decls_Or_Stmts, if possible, since -- they're doing very similar work, but are structured differently. ???) procedure Check_Unnesting_In_Decls_Or_Stmts (Decls_Or_Stmts : List_Id); -- Similarly, the declarations or statements in library-level packages may -- have created blocks with nested subprograms. Such a block must be -- transformed into a procedure followed by a call to it, so that unnesting -- can handle uplevel references within these nested subprograms (typically -- subprograms that handle finalization actions). This also applies to -- nested packages, including instantiations, in which case it must -- recursively process inner bodies. procedure Check_Unnesting_In_Handlers (N : Node_Id); -- Similarly, check for blocks with nested subprograms occurring within -- a set of exception handlers associated with a package body N. procedure Unnest_Block (Decl : Node_Id); -- Blocks that contain nested subprograms with up-level references need to -- create activation records for them. We do this by rewriting the block as -- a procedure, followed by a call to it in the same declarative list, to -- replicate the semantics of the original block. -- -- A common source for such block is a transient block created for a -- construct (declaration, assignment, etc.) that involves controlled -- actions or secondary-stack management, in which case the nested -- subprogram is a finalizer. procedure Unnest_If_Statement (If_Stmt : Node_Id); -- The separate statement lists associated with an if-statement (then part, -- elsif parts, else part) may require unnesting if they directly contain -- a subprogram body that references up-level objects. Each statement list -- is traversed to locate such subprogram bodies, and if a part's statement -- list contains a body, then the list is replaced with a new procedure -- containing the part's statements followed by a call to the procedure. -- Furthermore, any nested blocks, loops, or if statements will also be -- traversed to determine the need for further unnesting transformations. procedure Unnest_Statement_List (Stmts : in out List_Id); -- A list of statements that directly contains a subprogram at its outer -- level, that may reference objects declared in that same statement list, -- is rewritten as a procedure containing the statement list Stmts (which -- includes any such objects as well as the nested subprogram), followed by -- a call to the new procedure, and Stmts becomes the list containing the -- procedure and the call. This ensures that Unnest_Subprogram will later -- properly handle up-level references from the nested subprogram to -- objects declared earlier in statement list, by creating an activation -- record and passing it to the nested subprogram. This procedure also -- resets the Scope of objects declared in the statement list, as well as -- the Scope of the nested subprogram, to refer to the new procedure. -- Also, the new procedure is marked Has_Nested_Subprogram, so this should -- only be called when known that the statement list contains a subprogram. procedure Unnest_Loop (Loop_Stmt : Node_Id); -- Top-level Loops that contain nested subprograms with up-level references -- need to have activation records. We do this by rewriting the loop as a -- procedure containing the loop, followed by a call to the procedure in -- the same library-level declarative list, to replicate the semantics of -- the original loop. Such loops can occur due to aggregate expansions and -- other constructs. ----------------------- -- Local Subprograms -- ----------------------- procedure Check_Visibly_Controlled (Prim : Final_Primitives; Typ : Entity_Id; E : in out Entity_Id; Cref : in out Node_Id); -- The controlled operation declared for a derived type may not be -- overriding, if the controlled operations of the parent type are hidden, -- for example when the parent is a private type whose full view is -- controlled. For other primitive operations we modify the name of the -- operation to indicate that it is not overriding, but this is not -- possible for Initialize, etc. because they have to be retrievable by -- name. Before generating the proper call to one of these operations we -- check whether Typ is known to be controlled at the point of definition. -- If it is not then we must retrieve the hidden operation of the parent -- and use it instead. This is one case that might be solved more cleanly -- once Overriding pragmas or declarations are in place. function Contains_Subprogram (Blk : Entity_Id) return Boolean; -- Check recursively whether a loop or block contains a subprogram that -- may need an activation record. function Convert_View (Proc : Entity_Id; Arg : Node_Id) return Node_Id; -- Proc is one of the Initialize/Adjust/Finalize operations, and Arg is the -- argument being passed to it. This function will, if necessary, generate -- a conversion between the partial and full view of Arg to match the type -- of the formal of Proc, or force a conversion to the class-wide type in -- the case where the operation is abstract. function Make_Call (Loc : Source_Ptr; Proc_Id : Entity_Id; Param : Node_Id; Skip_Self : Boolean := False) return Node_Id; -- Subsidiary to Make_Adjust_Call and Make_Final_Call. Given the entity of -- routine [Deep_]Adjust or [Deep_]Finalize and an object parameter, create -- an adjust or finalization call. When flag Skip_Self is set, the related -- action has an effect on the components only (if any). function Make_Deep_Proc (Prim : Final_Primitives; Typ : Entity_Id; Stmts : List_Id) return Entity_Id; -- This function generates the tree for Deep_Initialize, Deep_Adjust or -- Deep_Finalize procedures according to the first parameter. These -- procedures operate on the type Typ. The Stmts parameter gives the -- body of the procedure. function Make_Deep_Array_Body (Prim : Final_Primitives; Typ : Entity_Id) return List_Id; -- This function generates the list of statements for implementing -- Deep_Initialize, Deep_Adjust or Deep_Finalize procedures according to -- the first parameter, these procedures operate on the array type Typ. function Make_Deep_Record_Body (Prim : Final_Primitives; Typ : Entity_Id; Is_Local : Boolean := False) return List_Id; -- This function generates the list of statements for implementing -- Deep_Initialize, Deep_Adjust or Deep_Finalize procedures according to -- the first parameter, these procedures operate on the record type Typ. -- Flag Is_Local is used in conjunction with Deep_Finalize to designate -- whether the inner logic should be dictated by state counters. function Make_Finalize_Address_Stmts (Typ : Entity_Id) return List_Id; -- Subsidiary to Make_Finalize_Address_Body, Make_Deep_Array_Body and -- Make_Deep_Record_Body. Generate the following statements: -- -- declare -- type Acc_Typ is access all Typ; -- for Acc_Typ'Storage_Size use 0; -- begin -- [Deep_]Finalize (Acc_Typ (V).all); -- end; ---------------------------------- -- Attach_Object_To_Master_Node -- ---------------------------------- procedure Attach_Object_To_Master_Node (Obj_Decl : Node_Id; Master_Node : Entity_Id) is Loc : constant Source_Ptr := Sloc (Obj_Decl); Obj_Id : constant Entity_Id := Defining_Entity (Obj_Decl); Func_Id : constant Entity_Id := (if Is_Return_Object (Obj_Id) then Return_Applies_To (Scope (Obj_Id)) else Empty); function Build_BIP_Cleanup_Stmts (Func_Id : Entity_Id; Obj_Addr : Node_Id) return Node_Id; -- Func_Id denotes a build-in-place function. Generate the following -- cleanup code: -- -- if BIPallocform > Secondary_Stack'Pos -- and then BIPcollection /= null -- then -- declare -- type Ptr_Typ is access Fun_Typ; -- for Ptr_Typ'Storage_Pool use BIPstoragepool.all; -- -- begin -- Free (Ptr_Typ (Obj_Addr)); -- end; -- end if; -- -- Fun_Typ is the return type of the Func_Id. ----------------------------- -- Build_BIP_Cleanup_Stmts -- ----------------------------- function Build_BIP_Cleanup_Stmts (Func_Id : Entity_Id; Obj_Addr : Node_Id) return Node_Id is Alloc_Id : constant Entity_Id := Build_In_Place_Formal (Func_Id, BIP_Alloc_Form); Decls : constant List_Id := New_List; Fin_Coll_Id : constant Entity_Id := Build_In_Place_Formal (Func_Id, BIP_Collection); Func_Typ : constant Entity_Id := Etype (Func_Id); Cond : Node_Id; Free_Blk : Node_Id; Free_Stmt : Node_Id; Pool_Id : Entity_Id; Ptr_Typ : Entity_Id; begin -- Generate: -- Pool_Id renames BIPstoragepool.all; -- This formal is not added on ZFP as those targets do not -- support pools. if RTE_Available (RE_Root_Storage_Pool_Ptr) then Pool_Id := Make_Temporary (Loc, 'P'); Append_To (Decls, Make_Object_Renaming_Declaration (Loc, Defining_Identifier => Pool_Id, Subtype_Mark => New_Occurrence_Of (RTE (RE_Root_Storage_Pool), Loc), Name => Make_Explicit_Dereference (Loc, New_Occurrence_Of (Build_In_Place_Formal (Func_Id, BIP_Storage_Pool), Loc)))); if Debug_Generated_Code then Set_Debug_Info_Needed (Pool_Id); end if; else Pool_Id := Empty; end if; -- Create an access type which uses the storage pool of the caller -- Generate: -- type Ptr_Typ is access Func_Typ; Ptr_Typ := Make_Temporary (Loc, 'P'); Append_To (Decls, Make_Full_Type_Declaration (Loc, Defining_Identifier => Ptr_Typ, Type_Definition => Make_Access_To_Object_Definition (Loc, Subtype_Indication => New_Occurrence_Of (Func_Typ, Loc)))); -- Perform minor decoration in order to set the collection and the -- storage pool attributes. Mutate_Ekind (Ptr_Typ, E_Access_Type); Set_Finalization_Collection (Ptr_Typ, Fin_Coll_Id); Set_Associated_Storage_Pool (Ptr_Typ, Pool_Id); -- Create an explicit free statement. Note that the free uses the -- caller's pool expressed as a renaming. Free_Stmt := Make_Free_Statement (Loc, Expression => Unchecked_Convert_To (Ptr_Typ, Obj_Addr)); Set_Storage_Pool (Free_Stmt, Pool_Id); -- Create a block to house the dummy type and the instantiation as -- well as to perform the cleanup the temporary. -- Generate: -- declare -- -- begin -- Free (Ptr_Typ (Obj_Addr)); -- end; Free_Blk := Make_Block_Statement (Loc, Declarations => Decls, Handled_Statement_Sequence => Make_Handled_Sequence_Of_Statements (Loc, Statements => New_List (Free_Stmt))); -- Generate: -- if BIPallocform > Secondary_Stack'Pos -- and then BIPcollection /= null -- then Cond := Make_And_Then (Loc, Left_Opnd => Make_Op_Gt (Loc, Left_Opnd => New_Occurrence_Of (Alloc_Id, Loc), Right_Opnd => Make_Integer_Literal (Loc, UI_From_Int (BIP_Allocation_Form'Pos (Secondary_Stack)))), Right_Opnd => Make_Op_Ne (Loc, Left_Opnd => New_Occurrence_Of (Fin_Coll_Id, Loc), Right_Opnd => Make_Null (Loc))); -- Generate: -- if then -- -- end if; return Make_If_Statement (Loc, Condition => Cond, Then_Statements => New_List (Free_Blk)); end Build_BIP_Cleanup_Stmts; -- Local variables Fin_Id : Entity_Id; Master_Node_Attach : Node_Id; Master_Node_Ins : Node_Id; Obj_Ref : Node_Id; Obj_Typ : Entity_Id; -- Start of processing for Attach_Object_To_Master_Node begin -- Finalize_Address is not generated in CodePeer mode because the -- body contains address arithmetic. So we don't want to generate -- the attach in this case. if CodePeer_Mode then return; end if; -- When the object is initialized by an aggregate, the attachment must -- occur after the last aggregate assignment takes place; only then is -- the object considered initialized. Likewise if it is initialized by -- a build-in-place call: we must attach only after the call. if Ekind (Obj_Id) in E_Constant | E_Variable then if Present (Last_Aggregate_Assignment (Obj_Id)) then Master_Node_Ins := Last_Aggregate_Assignment (Obj_Id); elsif Present (BIP_Initialization_Call (Obj_Id)) then Master_Node_Ins := BIP_Initialization_Call (Obj_Id); else Master_Node_Ins := Obj_Decl; end if; else Master_Node_Ins := Obj_Decl; end if; -- Handle the object type and the reference to the object Obj_Ref := New_Occurrence_Of (Obj_Id, Loc); Obj_Typ := Etype (Obj_Id); if not Is_Class_Wide_Type (Obj_Typ) then Obj_Typ := Base_Type (Obj_Typ); end if; if Is_Access_Type (Obj_Typ) then Obj_Ref := Make_Explicit_Dereference (Loc, Obj_Ref); Obj_Typ := Available_View (Designated_Type (Obj_Typ)); end if; -- If we are dealing with a return object of a build-in-place function -- and its allocation has been done in the function, we additionally -- need to detach it from the caller's finalization collection in order -- to prevent double finalization. if Present (Func_Id) and then Is_Build_In_Place_Function (Func_Id) and then Needs_BIP_Collection (Func_Id) then declare Ptr_Typ : constant Node_Id := Make_Temporary (Loc, 'P'); Param : constant Entity_Id := Make_Defining_Identifier (Loc, Name_V); Fin_Body : Node_Id; Fin_Stmts : List_Id; begin Fin_Stmts := Make_Finalize_Address_Stmts (Obj_Typ); Append_To (Fin_Stmts, Build_BIP_Cleanup_Stmts (Func_Id, New_Occurrence_Of (Param, Loc))); Fin_Id := Make_Defining_Identifier (Loc, Make_TSS_Name_Local (Obj_Typ, TSS_Finalize_Address)); Fin_Body := Make_Subprogram_Body (Loc, Specification => Make_Procedure_Specification (Loc, Defining_Unit_Name => Fin_Id, Parameter_Specifications => New_List ( Make_Parameter_Specification (Loc, Defining_Identifier => Param, Parameter_Type => New_Occurrence_Of (RTE (RE_Address), Loc)))), Declarations => New_List ( Make_Full_Type_Declaration (Loc, Defining_Identifier => Ptr_Typ, Type_Definition => Make_Access_To_Object_Definition (Loc, All_Present => True, Subtype_Indication => New_Occurrence_Of (Obj_Typ, Loc)))), Handled_Statement_Sequence => Make_Handled_Sequence_Of_Statements (Loc, Statements => Fin_Stmts)); Insert_After_And_Analyze (Master_Node_Ins, Fin_Body, Suppress => All_Checks); Master_Node_Ins := Fin_Body; end; else Fin_Id := Finalize_Address (Obj_Typ); if No (Fin_Id) and then Ekind (Obj_Typ) = E_Class_Wide_Subtype then Fin_Id := TSS (Obj_Typ, TSS_Finalize_Address); end if; end if; -- Now build the attachment call that will initialize the object's -- Master_Node using the object's address and finalization procedure. Master_Node_Attach := Make_Procedure_Call_Statement (Loc, Name => New_Occurrence_Of (RTE (RE_Attach_Object_To_Node), Loc), Parameter_Associations => New_List ( Make_Address_For_Finalize (Loc, Obj_Ref, Obj_Typ), Make_Attribute_Reference (Loc, Prefix => New_Occurrence_Of (Fin_Id, Loc), Attribute_Name => Name_Unrestricted_Access), New_Occurrence_Of (Master_Node, Loc))); Insert_After_And_Analyze (Master_Node_Ins, Master_Node_Attach, Suppress => All_Checks); end Attach_Object_To_Master_Node; ------------------------------------ -- Allows_Finalization_Collection -- ------------------------------------ function Allows_Finalization_Collection (Typ : Entity_Id) return Boolean is function In_Deallocation_Instance (E : Entity_Id) return Boolean; -- Determine whether entity E is inside a wrapper package created for -- an instance of Ada.Unchecked_Deallocation. ------------------------------ -- In_Deallocation_Instance -- ------------------------------ function In_Deallocation_Instance (E : Entity_Id) return Boolean is Pkg : constant Entity_Id := Scope (E); Par : Node_Id := Empty; begin if Ekind (Pkg) = E_Package and then Present (Related_Instance (Pkg)) and then Ekind (Related_Instance (Pkg)) = E_Procedure then Par := Generic_Parent (Parent (Related_Instance (Pkg))); return Present (Par) and then Chars (Par) = Name_Unchecked_Deallocation and then Chars (Scope (Par)) = Name_Ada and then Scope (Scope (Par)) = Standard_Standard; end if; return False; end In_Deallocation_Instance; -- Local variables Desig_Typ : constant Entity_Id := Designated_Type (Typ); Ptr_Typ : constant Entity_Id := Root_Type_Of_Full_View (Base_Type (Typ)); -- Start of processing for Allows_Finalization_Collection begin -- Certain run-time configurations and targets do not provide support -- for controlled types and therefore do not need collections. if Restriction_Active (No_Finalization) then return False; -- Do not consider C and C++ types since it is assumed that the non-Ada -- side will handle their cleanup. elsif Convention (Desig_Typ) = Convention_C or else Convention (Desig_Typ) = Convention_CPP then return False; -- Do not consider an access type that returns on the secondary stack elsif Present (Associated_Storage_Pool (Ptr_Typ)) and then Is_RTE (Associated_Storage_Pool (Ptr_Typ), RE_SS_Pool) then return False; -- Do not consider an access type that can never allocate an object elsif No_Pool_Assigned (Ptr_Typ) then return False; -- Do not consider an access type coming from an Unchecked_Deallocation -- instance. Even though the designated type may be controlled, the -- access type will never participate in any allocations. elsif In_Deallocation_Instance (Ptr_Typ) then return False; -- Do not consider a non-library access type when No_Nested_Finalization -- is in effect, because finalization collections are controlled objects -- and, if created, will violate the restriction. elsif Restriction_Active (No_Nested_Finalization) and then not Is_Library_Level_Entity (Ptr_Typ) then return False; -- Do not consider an access type subject to pragma No_Heap_Finalization -- because objects allocated through such a type are not to be finalized -- when the access type goes out of scope. elsif No_Heap_Finalization (Ptr_Typ) then return False; -- Do not create finalization collections in GNATprove mode because this -- causes unwanted extra expansion. Compilation in this mode must always -- keep the tree as close as possible to the original sources. elsif GNATprove_Mode then return False; -- Otherwise the access type may use a finalization collection else return True; end if; end Allows_Finalization_Collection; -------------------------------- -- Build_Anonymous_Collection -- -------------------------------- procedure Build_Anonymous_Collection (Ptr_Typ : Entity_Id) is function Create_Anonymous_Collection (Desig_Typ : Entity_Id; Unit_Id : Entity_Id; Unit_Decl : Node_Id) return Entity_Id; -- Create a new anonymous collection for access type Ptr_Typ with -- designated type Desig_Typ. The declaration of the collection and -- its initialization are inserted in the declarative part of unit -- Unit_Decl. Unit_Id is the entity of Unit_Decl. function Current_Anonymous_Collection (Desig_Typ : Entity_Id; Unit_Id : Entity_Id) return Entity_Id; -- Find an anonymous collection declared in unit Unit_Id which services -- designated type Desig_Typ. If there is none, return Empty. --------------------------------- -- Create_Anonymous_Collection -- --------------------------------- function Create_Anonymous_Collection (Desig_Typ : Entity_Id; Unit_Id : Entity_Id; Unit_Decl : Node_Id) return Entity_Id is Loc : constant Source_Ptr := Sloc (Unit_Id); All_FCs : Elist_Id; Decls : List_Id; FC_Decl : Node_Id; FC_Id : Entity_Id; Unit_Spec : Node_Id; begin -- Generate: -- : Finalization_Collection; FC_Id := Make_Temporary (Loc, 'A'); FC_Decl := Make_Object_Declaration (Loc, Defining_Identifier => FC_Id, Object_Definition => New_Occurrence_Of (RTE (RE_Finalization_Collection), Loc)); -- Find the declarative list of the unit if Nkind (Unit_Decl) = N_Package_Declaration then Unit_Spec := Specification (Unit_Decl); Decls := Visible_Declarations (Unit_Spec); if No (Decls) then Decls := New_List; Set_Visible_Declarations (Unit_Spec, Decls); end if; -- Package body or subprogram case -- ??? A subprogram spec or body that acts as a compilation unit may -- contain a formal parameter of an anonymous access-to-controlled -- type initialized by an allocator. -- procedure Comp_Unit_Proc (Param : access Ctrl := new Ctrl); -- There is no suitable place to create the collection because the -- subprogram is not in a declarative list. else Decls := Declarations (Unit_Decl); if No (Decls) then Decls := New_List; Set_Declarations (Unit_Decl, Decls); end if; end if; Prepend_To (Decls, FC_Decl); -- Use the scope of the unit when analyzing the declaration of the -- collection and its initialization actions. Push_Scope (Unit_Id); Analyze (FC_Decl); Pop_Scope; -- Mark the collection as servicing this specific designated type Set_Anonymous_Designated_Type (FC_Id, Desig_Typ); -- Include it in the list of existing anonymous collections which -- appear in this unit. This effectively creates a mapping between -- collections and designated types, which in turn allows for the -- reuse of collections on a per-unit basis. All_FCs := Anonymous_Collections (Unit_Id); if No (All_FCs) then All_FCs := New_Elmt_List; Set_Anonymous_Collections (Unit_Id, All_FCs); end if; Prepend_Elmt (FC_Id, All_FCs); return FC_Id; end Create_Anonymous_Collection; ---------------------------------- -- Current_Anonymous_Collection -- ---------------------------------- function Current_Anonymous_Collection (Desig_Typ : Entity_Id; Unit_Id : Entity_Id) return Entity_Id is All_FCs : constant Elist_Id := Anonymous_Collections (Unit_Id); FC_Elmt : Elmt_Id; FC_Id : Entity_Id; begin -- Inspect the list of anonymous collections declared within the unit -- looking for an existing collection which services the designated -- type. if Present (All_FCs) then FC_Elmt := First_Elmt (All_FCs); while Present (FC_Elmt) loop FC_Id := Node (FC_Elmt); -- The current collection services the same designated type. -- As a result, the collection can be reused and associated -- with another anonymous access-to-controlled type. if Anonymous_Designated_Type (FC_Id) = Desig_Typ then return FC_Id; end if; Next_Elmt (FC_Elmt); end loop; end if; return Empty; end Current_Anonymous_Collection; -- Local variables Desig_Typ : Entity_Id; FC_Id : Entity_Id; Priv_View : Entity_Id; Scop : Entity_Id; Unit_Decl : Node_Id; Unit_Id : Entity_Id; -- Start of processing for Build_Anonymous_Collection begin -- Nothing to do if the circumstances do not allow for a finalization -- collection. if not Allows_Finalization_Collection (Ptr_Typ) then return; end if; Unit_Decl := Unit (Cunit (Current_Sem_Unit)); Unit_Id := Unique_Defining_Entity (Unit_Decl); -- The compilation unit is a package instantiation. In this case the -- anonymous collection is associated with the package spec, as both -- the spec and body appear at the same level. if Nkind (Unit_Decl) = N_Package_Body and then Nkind (Original_Node (Unit_Decl)) = N_Package_Instantiation then Unit_Id := Corresponding_Spec (Unit_Decl); Unit_Decl := Unit_Declaration_Node (Unit_Id); end if; -- Use the initial declaration of the designated type when it denotes -- the full view of an incomplete or private type. This ensures that -- types with one and two views are treated the same. Desig_Typ := Directly_Designated_Type (Ptr_Typ); Priv_View := Incomplete_Or_Partial_View (Desig_Typ); if Present (Priv_View) then Desig_Typ := Priv_View; end if; -- For a designated type not declared at library level, we cannot create -- a finalization collection attached to an outer unit since this would -- generate dangling references to the dynamic scope through access-to- -- procedure values designating the local Finalize_Address primitive. Scop := Enclosing_Dynamic_Scope (Desig_Typ); if Scop /= Standard_Standard and then Scope_Depth (Scop) > Scope_Depth (Unit_Id) then return; end if; -- Determine whether the current semantic unit already has an anonymous -- collection which services the designated type. FC_Id := Current_Anonymous_Collection (Desig_Typ, Unit_Id); -- If this is not the case, create a new collection if No (FC_Id) then FC_Id := Create_Anonymous_Collection (Desig_Typ, Unit_Id, Unit_Decl); end if; Set_Finalization_Collection (Ptr_Typ, FC_Id); end Build_Anonymous_Collection; ---------------------------- -- Build_Array_Deep_Procs -- ---------------------------- procedure Build_Array_Deep_Procs (Typ : Entity_Id) is begin Set_TSS (Typ, Make_Deep_Proc (Prim => Initialize_Case, Typ => Typ, Stmts => Make_Deep_Array_Body (Initialize_Case, Typ))); if not Is_Inherently_Limited_Type (Typ) then Set_TSS (Typ, Make_Deep_Proc (Prim => Adjust_Case, Typ => Typ, Stmts => Make_Deep_Array_Body (Adjust_Case, Typ))); end if; -- Do not generate Deep_Finalize and Finalize_Address if finalization is -- suppressed since these routine will not be used. if not Restriction_Active (No_Finalization) then Set_TSS (Typ, Make_Deep_Proc (Prim => Finalize_Case, Typ => Typ, Stmts => Make_Deep_Array_Body (Finalize_Case, Typ))); -- Create TSS primitive Finalize_Address (unless CodePeer_Mode) if not CodePeer_Mode then Set_TSS (Typ, Make_Deep_Proc (Prim => Address_Case, Typ => Typ, Stmts => Make_Deep_Array_Body (Address_Case, Typ))); end if; end if; end Build_Array_Deep_Procs; ------------------------------ -- Build_Cleanup_Statements -- ------------------------------ function Build_Cleanup_Statements (N : Node_Id; Additional_Cleanup : List_Id) return List_Id is Is_Asynchronous_Call : constant Boolean := Nkind (N) = N_Block_Statement and then Is_Asynchronous_Call_Block (N); Is_Master : constant Boolean := Nkind (N) /= N_Entry_Body and then Is_Task_Master (N); Is_Protected_Subp_Body : constant Boolean := Nkind (N) = N_Subprogram_Body and then Is_Protected_Subprogram_Body (N); Is_Task_Allocation : constant Boolean := Nkind (N) = N_Block_Statement and then Is_Task_Allocation_Block (N); Is_Task_Body : constant Boolean := Nkind (Original_Node (N)) = N_Task_Body; Loc : constant Source_Ptr := Sloc (N); Stmts : constant List_Id := New_List; begin if Is_Task_Body then if Restricted_Profile then Append_To (Stmts, Build_Runtime_Call (Loc, RE_Complete_Restricted_Task)); else Append_To (Stmts, Build_Runtime_Call (Loc, RE_Complete_Task)); end if; elsif Is_Master then if Restriction_Active (No_Task_Hierarchy) = False then Append_To (Stmts, Build_Runtime_Call (Loc, RE_Complete_Master)); end if; -- Add statements to undefer abort. elsif Is_Protected_Subp_Body then if Abort_Allowed then Append_To (Stmts, Build_Runtime_Call (Loc, RE_Abort_Undefer)); end if; -- Add a call to Expunge_Unactivated_Tasks for dynamically allocated -- tasks. Other unactivated tasks are completed by Complete_Task or -- Complete_Master. -- NOTE: The generated code references _chain, a local object elsif Is_Task_Allocation then -- Generate: -- Expunge_Unactivated_Tasks (_chain); -- where _chain is the list of tasks created by the allocator but not -- yet activated. This list will be empty unless the block completes -- abnormally. Append_To (Stmts, Make_Procedure_Call_Statement (Loc, Name => New_Occurrence_Of (RTE (RE_Expunge_Unactivated_Tasks), Loc), Parameter_Associations => New_List ( New_Occurrence_Of (Activation_Chain_Entity (N), Loc)))); -- Attempt to cancel an asynchronous entry call whenever the block which -- contains the abortable part is exited. -- NOTE: The generated code references Cnn, a local object elsif Is_Asynchronous_Call then declare Cancel_Param : constant Entity_Id := Entry_Cancel_Parameter (Entity (Identifier (N))); begin -- If it is of type Communication_Block, this must be a protected -- entry call. Generate: -- if Enqueued (Cancel_Param) then -- Cancel_Protected_Entry_Call (Cancel_Param); -- end if; if Is_RTE (Etype (Cancel_Param), RE_Communication_Block) then Append_To (Stmts, Make_If_Statement (Loc, Condition => Make_Function_Call (Loc, Name => New_Occurrence_Of (RTE (RE_Enqueued), Loc), Parameter_Associations => New_List ( New_Occurrence_Of (Cancel_Param, Loc))), Then_Statements => New_List ( Make_Procedure_Call_Statement (Loc, Name => New_Occurrence_Of (RTE (RE_Cancel_Protected_Entry_Call), Loc), Parameter_Associations => New_List ( New_Occurrence_Of (Cancel_Param, Loc)))))); -- Asynchronous delay, generate: -- Cancel_Async_Delay (Cancel_Param); elsif Is_RTE (Etype (Cancel_Param), RE_Delay_Block) then Append_To (Stmts, Make_Procedure_Call_Statement (Loc, Name => New_Occurrence_Of (RTE (RE_Cancel_Async_Delay), Loc), Parameter_Associations => New_List ( Make_Attribute_Reference (Loc, Prefix => New_Occurrence_Of (Cancel_Param, Loc), Attribute_Name => Name_Unchecked_Access)))); -- Task entry call, generate: -- Cancel_Task_Entry_Call (Cancel_Param); else Append_To (Stmts, Make_Procedure_Call_Statement (Loc, Name => New_Occurrence_Of (RTE (RE_Cancel_Task_Entry_Call), Loc), Parameter_Associations => New_List ( New_Occurrence_Of (Cancel_Param, Loc)))); end if; end; end if; Append_List_To (Stmts, Additional_Cleanup); return Stmts; end Build_Cleanup_Statements; ----------------------------- -- Build_Controlling_Procs -- ----------------------------- procedure Build_Controlling_Procs (Typ : Entity_Id) is begin if Is_Array_Type (Typ) then Build_Array_Deep_Procs (Typ); else pragma Assert (Is_Record_Type (Typ)); Build_Record_Deep_Procs (Typ); end if; end Build_Controlling_Procs; ----------------------------- -- Build_Exception_Handler -- ----------------------------- function Build_Exception_Handler (Data : Finalization_Exception_Data; For_Library : Boolean := False) return Node_Id is Actuals : List_Id; Proc_To_Call : Entity_Id; Except : Node_Id; Stmts : List_Id; begin pragma Assert (Present (Data.Raised_Id)); if Exception_Extra_Info or else (For_Library and not Restricted_Profile) then if Exception_Extra_Info then -- Generate: -- Get_Current_Excep.all Except := Make_Function_Call (Data.Loc, Name => Make_Explicit_Dereference (Data.Loc, Prefix => New_Occurrence_Of (RTE (RE_Get_Current_Excep), Data.Loc))); else -- Generate: -- null Except := Make_Null (Data.Loc); end if; if For_Library and then not Restricted_Profile then Proc_To_Call := RTE (RE_Save_Library_Occurrence); Actuals := New_List (Except); else Proc_To_Call := RTE (RE_Save_Occurrence); -- The dereference occurs only when Exception_Extra_Info is true, -- and therefore Except is not null. Actuals := New_List ( New_Occurrence_Of (Data.E_Id, Data.Loc), Make_Explicit_Dereference (Data.Loc, Except)); end if; -- Generate: -- when others => -- if not Raised_Id then -- Raised_Id := True; -- Save_Occurrence (E_Id, Get_Current_Excep.all.all); -- or -- Save_Library_Occurrence (Get_Current_Excep.all); -- end if; Stmts := New_List ( Make_If_Statement (Data.Loc, Condition => Make_Op_Not (Data.Loc, Right_Opnd => New_Occurrence_Of (Data.Raised_Id, Data.Loc)), Then_Statements => New_List ( Make_Assignment_Statement (Data.Loc, Name => New_Occurrence_Of (Data.Raised_Id, Data.Loc), Expression => New_Occurrence_Of (Standard_True, Data.Loc)), Make_Procedure_Call_Statement (Data.Loc, Name => New_Occurrence_Of (Proc_To_Call, Data.Loc), Parameter_Associations => Actuals)))); else -- Generate: -- Raised_Id := True; Stmts := New_List ( Make_Assignment_Statement (Data.Loc, Name => New_Occurrence_Of (Data.Raised_Id, Data.Loc), Expression => New_Occurrence_Of (Standard_True, Data.Loc))); end if; -- Generate: -- when others => return Make_Exception_Handler (Data.Loc, Exception_Choices => New_List (Make_Others_Choice (Data.Loc)), Statements => Stmts); end Build_Exception_Handler; ----------------------------------- -- Build_Finalization_Collection -- ----------------------------------- procedure Build_Finalization_Collection (Typ : Entity_Id; For_Lib_Level : Boolean := False; For_Private : Boolean := False; Context_Scope : Entity_Id := Empty; Insertion_Node : Node_Id := Empty) is Ptr_Typ : constant Entity_Id := Root_Type_Of_Full_View (Base_Type (Typ)); -- Finalization collections built for named access types are associated -- with the full view (if applicable) as a consequence of freezing. The -- full view criteria does not apply to anonymous access types because -- those cannot have a private and a full view. -- Start of processing for Build_Finalization_Collection begin -- Nothing to do if the circumstances do not allow for a finalization -- collection. if not Allows_Finalization_Collection (Typ) then return; -- Various machinery such as freezing may have already created a -- finalization collection. elsif Present (Finalization_Collection (Ptr_Typ)) then return; end if; declare Actions : constant List_Id := New_List; Loc : constant Source_Ptr := Sloc (Ptr_Typ); Fin_Coll_Id : Entity_Id; Pool_Id : Entity_Id; begin -- Source access types use fixed names since the collection will be -- inserted in the same source unit only once. The only exception to -- this are instances using the same access type as generic actual. if Comes_From_Source (Ptr_Typ) and then not Inside_A_Generic then Fin_Coll_Id := Make_Defining_Identifier (Loc, Chars => New_External_Name (Chars (Ptr_Typ), "FC")); -- Internally generated access types use temporaries as their names -- due to possible collision with identical names coming from other -- packages. else Fin_Coll_Id := Make_Temporary (Loc, 'F'); end if; Set_Finalization_Collection (Ptr_Typ, Fin_Coll_Id); -- Generate: -- FC : aliased Finalization_Collection; Append_To (Actions, Make_Object_Declaration (Loc, Defining_Identifier => Fin_Coll_Id, Aliased_Present => True, Object_Definition => New_Occurrence_Of (RTE (RE_Finalization_Collection), Loc))); if Debug_Generated_Code then Set_Debug_Info_Needed (Fin_Coll_Id); end if; -- Set the associated pool and primitive Finalize_Address of the new -- finalization collection. -- The access type has a user-defined storage pool, use it if Present (Associated_Storage_Pool (Ptr_Typ)) then Pool_Id := Associated_Storage_Pool (Ptr_Typ); -- Otherwise the default choice is the global storage pool else Pool_Id := RTE (RE_Global_Pool_Object); Set_Associated_Storage_Pool (Ptr_Typ, Pool_Id); end if; -- A finalization collection created for an access designating a type -- with private components is inserted before a context-dependent -- node. if For_Private then -- At this point both the scope of the context and the insertion -- mode must be known. pragma Assert (Present (Context_Scope)); pragma Assert (Present (Insertion_Node)); Push_Scope (Context_Scope); -- Treat use clauses as declarations and insert directly in front -- of them. if Nkind (Insertion_Node) in N_Use_Package_Clause | N_Use_Type_Clause then Insert_List_Before_And_Analyze (Insertion_Node, Actions); else Insert_Actions (Insertion_Node, Actions); end if; Pop_Scope; -- The finalization collection belongs to an access type related -- to a build-in-place function call used to initialize a library -- level object. The collection must be inserted in front of the -- access type declaration denoted by Insertion_Node. elsif For_Lib_Level then pragma Assert (Present (Insertion_Node)); Insert_Actions (Insertion_Node, Actions); -- Otherwise the finalization collection and its initialization -- become a part of the freeze node. else Append_Freeze_Actions (Ptr_Typ, Actions); end if; Analyze_List (Actions); -- When the type the finalization collection is being generated for -- was created to store a 'Old object, then mark it as such so its -- finalization can be delayed until after postconditions have been -- checked. if Stores_Attribute_Old_Prefix (Ptr_Typ) then Set_Stores_Attribute_Old_Prefix (Fin_Coll_Id); end if; end; end Build_Finalization_Collection; --------------------- -- Build_Finalizer -- --------------------- procedure Build_Finalizer (N : Node_Id; Clean_Stmts : List_Id; Mark_Id : Entity_Id; Top_Decls : List_Id; Defer_Abort : Boolean; Fin_Id : out Entity_Id) is Acts_As_Clean : constant Boolean := Present (Mark_Id) or else (Present (Clean_Stmts) and then Is_Non_Empty_List (Clean_Stmts)); For_Package_Body : constant Boolean := Nkind (N) = N_Package_Body; For_Package_Spec : constant Boolean := Nkind (N) = N_Package_Declaration; For_Package : constant Boolean := For_Package_Body or else For_Package_Spec; Loc : constant Source_Ptr := Sloc (N); -- NOTE: Local variable declarations are conservative and do not create -- structures right from the start. Entities and lists are created once -- it has been established that N has at least one controlled object. Counter_Val : Nat := 0; -- Holds the number of controlled objects encountered so far Decls : List_Id := No_List; -- Declarative region of N (if available). If N is a package declaration -- Decls denotes the visible declarations. Finalizer_Data : Finalization_Exception_Data; -- Data for the exception Finalizer_Decls : List_Id := No_List; -- Local variable declarations Finalization_Master : Entity_Id; -- The Finalization Master object Finalizer_Stmts : List_Id := No_List; -- The statement list of the finalizer body Has_Ctrl_Objs : Boolean := False; -- A general flag which denotes whether N has at least one controlled -- object. Has_Tagged_Types : Boolean := False; -- A general flag which indicates whether N has at least one library- -- level tagged type declaration. HSS : Node_Id := Empty; -- The sequence of statements of N (if available) Prev_At_End : Entity_Id := Empty; -- The previous at end procedure of the handled statements block of N Priv_Decls : List_Id := No_List; -- The private declarations of N if N is a package declaration Spec_Id : Entity_Id := Empty; Spec_Decls : List_Id := Top_Decls; Stmts : List_Id := No_List; Tagged_Type_Stmts : List_Id := No_List; -- Contains calls to Ada.Tags.Unregister_Tag for all library-level -- tagged types found in N. ----------------------- -- Local subprograms -- ----------------------- procedure Build_Components; -- Create all entites and initialize all lists used in the creation of -- the finalizer. procedure Create_Finalizer; -- Create the spec and body of the finalizer and insert them in the -- proper place in the tree depending on the context. function New_Finalizer_Name (Spec_Id : Node_Id; For_Spec : Boolean) return Name_Id; -- Create a fully qualified name of a package spec or body finalizer. -- The generated name is of the form: xx__yy__finalize_[spec|body]. procedure Process_Declarations (Decls : List_Id; Preprocess : Boolean := False); -- Inspect a list of declarations or statements which may contain -- objects that need finalization. When flag Preprocess is set, the -- routine will simply count the total number of controlled objects in -- Decls and set Counter_Val accordingly. procedure Process_Object_Declaration (Decl : Node_Id; Is_Protected : Boolean := False); -- Generate all the machinery associated with the finalization of a -- single object. Flag Is_Protected is set when Decl denotes a simple -- protected object. procedure Process_Tagged_Type_Declaration (Decl : Node_Id); -- Generate all the code necessary to unregister the external tag of a -- tagged type. ---------------------- -- Build_Components -- ---------------------- procedure Build_Components is Constraints : List_Id; Master_Decl : Node_Id; Master_Name : Name_Id; begin pragma Assert (Present (Decls)); -- If the context contains controlled objects, then we create the -- finalization master, unless there is a single such object: in -- this common case, we'll directly finalize the object. if Has_Ctrl_Objs then if Counter_Val > 1 then if For_Package_Spec then Master_Name := New_External_Name (Name_uMaster, Suffix => "_spec"); elsif For_Package_Body then Master_Name := New_External_Name (Name_uMaster, Suffix => "_body"); else Master_Name := New_Internal_Name ('M'); end if; Finalization_Master := Make_Defining_Identifier (Loc, Master_Name); -- The master is statically parameterized by the context Constraints := New_List; Append_To (Constraints, New_Occurrence_Of (Boolean_Literals (Exceptions_OK), Loc)); Append_To (Constraints, New_Occurrence_Of (Boolean_Literals (Exception_Extra_Info), Loc)); Append_To (Constraints, New_Occurrence_Of (Boolean_Literals (For_Package), Loc)); Master_Decl := Make_Object_Declaration (Loc, Defining_Identifier => Finalization_Master, Object_Definition => Make_Subtype_Indication (Loc, Subtype_Mark => New_Occurrence_Of (RTE (RE_Finalization_Master), Loc), Constraint => Make_Index_Or_Discriminant_Constraint (Loc, Constraints => Constraints))); Prepend_To (Decls, Master_Decl); Analyze (Master_Decl, Suppress => All_Checks); end if; if Exceptions_OK then Finalizer_Decls := New_List; Build_Object_Declarations (Finalizer_Data, Finalizer_Decls, Loc, For_Package); else Finalizer_Decls := No_List; end if; end if; -- If the context requires additional cleanup, the finalization -- machinery is added after the cleanup code. if Acts_As_Clean then Finalizer_Stmts := Clean_Stmts; else Finalizer_Stmts := New_List; end if; if Has_Tagged_Types then Tagged_Type_Stmts := New_List; end if; end Build_Components; ---------------------- -- Create_Finalizer -- ---------------------- procedure Create_Finalizer is Body_Id : Entity_Id; Fin_Body : Node_Id; Fin_Call : Node_Id; Fin_Spec : Node_Id; begin -- Step 1: Creation of the finalizer name -- Packages must use a distinct name for their finalizers since the -- binder will have to generate calls to them by name. The name is -- of the following form: -- xx__yy__finalize_[spec|body] if For_Package then Fin_Id := Make_Defining_Identifier (Loc, New_Finalizer_Name (Spec_Id, For_Package_Spec)); Set_Has_Qualified_Name (Fin_Id); Set_Has_Fully_Qualified_Name (Fin_Id); -- The default name is _finalizer else -- Generation of a finalization procedure exclusively for 'Old -- interally generated constants requires different name since -- there will need to be multiple finalization routines in the -- same scope. See Build_Finalizer for details. Fin_Id := Make_Defining_Identifier (Loc, Chars => New_External_Name (Name_uFinalizer)); -- Inlining the finalizer produces a substantial speedup at -O2. -- It is inlined by default at -O3. Either way, it is called -- exactly twice (once on the normal path, and once for -- exceptions/abort), so this won't bloat the code too much. Set_Is_Inlined (Fin_Id); end if; if Debug_Generated_Code then Set_Debug_Info_Needed (Fin_Id); end if; -- Step 2: Creation of the finalizer specification -- Generate: -- procedure Fin_Id; Fin_Spec := Make_Subprogram_Declaration (Loc, Specification => Make_Procedure_Specification (Loc, Defining_Unit_Name => Fin_Id)); if For_Package then Set_Is_Exported (Fin_Id); Set_Interface_Name (Fin_Id, Make_String_Literal (Loc, Strval => Get_Name_String (Chars (Fin_Id)))); end if; -- Step 3: Creation of the finalizer body -- Add the library-level tagged type unregistration machinery before -- the finalization circuitry. This ensures that external tags will -- be removed even if a finalization exception occurs at some point. if Has_Tagged_Types then Prepend_List_To (Finalizer_Stmts, Tagged_Type_Stmts); end if; -- Add a call to the previous At_End handler if it exists. The call -- must always precede the finalization circuitry. if Present (Prev_At_End) then Prepend_To (Finalizer_Stmts, Make_Procedure_Call_Statement (Loc, Prev_At_End)); -- Clear the At_End handler since we have already generated the -- proper replacement call for it. Set_At_End_Proc (HSS, Empty); end if; -- If there are no controlled objects to be finalized, generate; -- procedure Fin_Id is -- begin -- Abort_Defer; -- Added if abort is allowed -- -- Added if exists -- -- Added if Has_Tagged_Types -- -- Added if Acts_As_Clean -- -- Added if Mark_Id exists -- Abort_Undefer; -- Added if abort is allowed -- end Fin_Id; -- If there are controlled objects to be finalized, generate: -- procedure Fin_Id is -- Abort : constant Boolean := Triggered_By_Abort; -- E : Exception_Occurrence; -- Raised : Boolean := False; -- begin -- Abort_Defer; -- Added if abort is allowed -- -- Added if exists -- -- Added if Has_Tagged_Types -- -- Added if Acts_As_Clean -- -- -- Added if Mark_Id exists -- Abort_Undefer; -- Added if abort is allowed -- end Fin_Id; if Has_Ctrl_Objs and then Counter_Val > 1 then Fin_Call := Make_Procedure_Call_Statement (Loc, Name => New_Occurrence_Of (RTE (RE_Finalize_Master), Loc), Parameter_Associations => New_List (New_Occurrence_Of (Finalization_Master, Loc))); -- For CodePeer, the exception handlers normally generated here -- generate complex flowgraphs which result in capacity problems. -- Omitting these handlers for CodePeer is justified as follows: -- If a handler is dead, then omitting it is surely ok -- If a handler is live, then CodePeer should flag the -- potentially-exception-raising construct that causes it -- to be live. That is what we are interested in, not what -- happens after the exception is raised. if Exceptions_OK and not CodePeer_Mode then Fin_Call := Make_Block_Statement (Loc, Handled_Statement_Sequence => Make_Handled_Sequence_Of_Statements (Loc, Statements => New_List (Fin_Call), Exception_Handlers => New_List ( Build_Exception_Handler (Finalizer_Data, For_Package)))); end if; Append_To (Finalizer_Stmts, Fin_Call); end if; -- Release the secondary stack if Present (Mark_Id) then declare Release : Node_Id := Build_SS_Release_Call (Loc, Mark_Id); begin -- If the context is a build-in-place function, the secondary -- stack must be released, unless the build-in-place function -- itself is returning on the secondary stack. Generate: -- -- if BIP_Alloc_Form /= Secondary_Stack then -- SS_Release (Mark_Id); -- end if; -- -- Note that if the function returns on the secondary stack, -- then the responsibility of reclaiming the space is always -- left to the caller (recursively if needed). if Nkind (N) = N_Subprogram_Body then declare Spec_Id : constant Entity_Id := Unique_Defining_Entity (N); BIP_SS : constant Boolean := Is_Build_In_Place_Function (Spec_Id) and then Needs_BIP_Alloc_Form (Spec_Id); begin if BIP_SS then Release := Make_If_Statement (Loc, Condition => Make_Op_Ne (Loc, Left_Opnd => New_Occurrence_Of (Build_In_Place_Formal (Spec_Id, BIP_Alloc_Form), Loc), Right_Opnd => Make_Integer_Literal (Loc, UI_From_Int (BIP_Allocation_Form'Pos (Secondary_Stack)))), Then_Statements => New_List (Release)); end if; end; end if; Append_To (Finalizer_Stmts, Release); end; end if; -- Protect the statements with abort defer/undefer. This is only when -- aborts are allowed and the cleanup statements require deferral or -- there are controlled objects to be finalized. Note that the abort -- defer/undefer pair does not require an extra block because the -- finalization exception is caught in its corresponding finalization -- block. As a result, the call to Abort_Defer always takes place. if Abort_Allowed and then (Defer_Abort or Has_Ctrl_Objs) then Prepend_To (Finalizer_Stmts, Build_Runtime_Call (Loc, RE_Abort_Defer)); Append_To (Finalizer_Stmts, Build_Runtime_Call (Loc, RE_Abort_Undefer)); end if; -- The local exception does not need to be reraised for library-level -- finalizers. Note that this action must be carried out after object -- cleanup, secondary stack release, and abort undeferral. Generate: -- if Raised and then not Abort then -- Raise_From_Controlled_Operation (E); -- end if; if Has_Ctrl_Objs and Exceptions_OK and not For_Package then Append_To (Finalizer_Stmts, Build_Raise_Statement (Finalizer_Data)); end if; -- Create the body of the finalizer Body_Id := Make_Defining_Identifier (Loc, Chars (Fin_Id)); if Debug_Generated_Code then Set_Debug_Info_Needed (Body_Id); end if; if For_Package then Set_Has_Qualified_Name (Body_Id); Set_Has_Fully_Qualified_Name (Body_Id); end if; Fin_Body := Make_Subprogram_Body (Loc, Specification => Make_Procedure_Specification (Loc, Defining_Unit_Name => Body_Id), Declarations => Finalizer_Decls, Handled_Statement_Sequence => Make_Handled_Sequence_Of_Statements (Loc, Statements => Finalizer_Stmts)); -- Step 4: Spec and body insertion, analysis if For_Package then -- If a package spec has private declarations, both the finalizer -- spec and body are inserted at the end of this list. if For_Package_Spec and then Present (Priv_Decls) then Append_To (Priv_Decls, Fin_Spec); Append_To (Priv_Decls, Fin_Body); -- Otherwise, and for a package body, both the finalizer spec and -- body are inserted at the end of the package declarations. else Append_To (Decls, Fin_Spec); Append_To (Decls, Fin_Body); end if; -- Non-package case else pragma Assert (Present (Spec_Decls)); Append_To (Spec_Decls, Fin_Spec); Append_To (Spec_Decls, Fin_Body); end if; Analyze (Fin_Spec, Suppress => All_Checks); Analyze (Fin_Body, Suppress => All_Checks); -- Never consider that the finalizer procedure is enabled Ghost, even -- when the corresponding unit is Ghost, as this would lead to an -- an external name with a ___ghost_ prefix that the binder cannot -- generate, as it has no knowledge of the Ghost status of units. Set_Is_Checked_Ghost_Entity (Fin_Id, False); end Create_Finalizer; ------------------------ -- New_Finalizer_Name -- ------------------------ function New_Finalizer_Name (Spec_Id : Node_Id; For_Spec : Boolean) return Name_Id is procedure New_Finalizer_Name (Id : Entity_Id); -- Place "__" in the name buffer. If the identifier -- has a non-standard scope, process the scope first. ------------------------ -- New_Finalizer_Name -- ------------------------ procedure New_Finalizer_Name (Id : Entity_Id) is begin if Scope (Id) = Standard_Standard then Get_Name_String (Chars (Id)); else New_Finalizer_Name (Scope (Id)); Add_Str_To_Name_Buffer ("__"); Get_Name_String_And_Append (Chars (Id)); end if; end New_Finalizer_Name; -- Start of processing for New_Finalizer_Name begin -- Create the fully qualified name of the enclosing scope New_Finalizer_Name (Spec_Id); -- Generate: -- __finalize_[spec|body] Add_Str_To_Name_Buffer ("__finalize_"); if For_Spec then Add_Str_To_Name_Buffer ("spec"); else Add_Str_To_Name_Buffer ("body"); end if; return Name_Find; end New_Finalizer_Name; -------------------------- -- Process_Declarations -- -------------------------- procedure Process_Declarations (Decls : List_Id; Preprocess : Boolean := False) is procedure Process_Package_Body (Decl : Node_Id); -- Process an N_Package_Body node procedure Processing_Actions (Decl : Node_Id; Is_Protected : Boolean := False); -- Depending on the mode of operation of Process_Declarations, either -- increment the controlled object counter, set the controlled object -- flag and store the last top level construct or process the current -- declaration. Flag Is_Protected is set when the current declaration -- denotes a simple protected object. -------------------------- -- Process_Package_Body -- -------------------------- procedure Process_Package_Body (Decl : Node_Id) is begin -- Do not inspect an ignored Ghost package body because all -- code found within will not appear in the final tree. if Is_Ignored_Ghost_Entity (Defining_Entity (Decl)) then null; elsif Ekind (Corresponding_Spec (Decl)) /= E_Generic_Package then Process_Declarations (Declarations (Decl), Preprocess); end if; end Process_Package_Body; ------------------------ -- Processing_Actions -- ------------------------ procedure Processing_Actions (Decl : Node_Id; Is_Protected : Boolean := False) is begin -- Library-level tagged type if Nkind (Decl) = N_Full_Type_Declaration then if Preprocess then Has_Tagged_Types := True; -- Unregister tagged type, unless No_Tagged_Type_Registration -- is active. elsif not Restriction_Active (No_Tagged_Type_Registration) then Process_Tagged_Type_Declaration (Decl); end if; -- Controlled object declaration else if Preprocess then Counter_Val := Counter_Val + 1; Has_Ctrl_Objs := True; else Process_Object_Declaration (Decl, Is_Protected); end if; end if; end Processing_Actions; -- Local variables Decl : Node_Id; Expr : Node_Id; Obj_Id : Entity_Id; Obj_Typ : Entity_Id; Pack_Id : Entity_Id; Spec : Node_Id; Typ : Entity_Id; -- Start of processing for Process_Declarations begin if Is_Empty_List (Decls) then return; end if; -- Process all declarations in reverse order Decl := Last_Non_Pragma (Decls); while Present (Decl) loop -- Library-level tagged types if Nkind (Decl) = N_Full_Type_Declaration then Typ := Defining_Identifier (Decl); -- Ignored Ghost types do not need any cleanup actions because -- they will not appear in the final tree. if Is_Ignored_Ghost_Entity (Typ) then null; elsif Is_Tagged_Type (Typ) and then Is_Library_Level_Entity (Typ) and then Convention (Typ) = Convention_Ada and then Present (Access_Disp_Table (Typ)) and then not Is_Abstract_Type (Typ) and then not No_Run_Time_Mode and then not Restriction_Active (No_Tagged_Type_Registration) and then RTE_Available (RE_Register_Tag) then Processing_Actions (Decl); end if; -- Regular object declarations elsif Nkind (Decl) = N_Object_Declaration then Obj_Id := Defining_Identifier (Decl); Obj_Typ := Base_Type (Etype (Obj_Id)); Expr := Expression (Decl); -- Bypass any form of processing for objects which have their -- finalization disabled. This applies only to objects at the -- library level. if For_Package and then Finalize_Storage_Only (Obj_Typ) then null; -- Finalization of transient objects is treated separately in -- order to handle sensitive cases. These include: -- * Conditional expressions -- * Expressions with actions -- * Transient scopes elsif Is_Finalized_Transient (Obj_Id) then null; -- Finalization of specific objects is also treated separately elsif Is_Ignored_For_Finalization (Obj_Id) then null; -- Conversely, if one of the above cases created a Master_Node, -- finalization actions are required for the associated object. elsif Ekind (Obj_Id) = E_Variable and then Is_RTE (Obj_Typ, RE_Master_Node) then Processing_Actions (Decl); -- Ignored Ghost objects do not need any cleanup actions -- because they will not appear in the final tree. elsif Is_Ignored_Ghost_Entity (Obj_Id) then null; -- The object is of the form: -- Obj : [constant] Typ [:= Expr]; -- Do not process the incomplete view of a deferred constant. -- Note that an object initialized by means of a BIP function -- call may appear as a deferred constant after expansion -- activities. These kinds of objects must be finalized. elsif not Is_Imported (Obj_Id) and then Needs_Finalization (Obj_Typ) and then not (Ekind (Obj_Id) = E_Constant and then not Has_Completion (Obj_Id) and then No (BIP_Initialization_Call (Obj_Id))) then Processing_Actions (Decl); -- The object is of the form: -- Obj : Access_Typ := Non_BIP_Function_Call'reference; -- Obj : Access_Typ := -- BIP_Function_Call (BIPalloc => 2, ...)'reference; elsif Is_Access_Type (Obj_Typ) and then Needs_Finalization (Available_View (Designated_Type (Obj_Typ))) and then Present (Expr) and then (Is_Secondary_Stack_BIP_Func_Call (Expr) or else (Is_Non_BIP_Func_Call (Expr) and then not Is_Related_To_Func_Return (Obj_Id))) then Processing_Actions (Decl); -- Simple protected objects which use the type System.Tasking. -- Protected_Objects.Protection to manage their locks should -- be treated as controlled since they require manual cleanup. -- but not for restricted run-time libraries (Ravenscar), see -- also Cleanup_Protected_Object. -- The only exception is illustrated in the following example: -- package Pkg is -- type Ctrl is new Controlled ... -- procedure Finalize (Obj : in out Ctrl); -- Lib_Obj : Ctrl; -- end Pkg; -- package body Pkg is -- protected Prot is -- procedure Do_Something (Obj : in out Ctrl); -- end Prot; -- protected body Prot is -- procedure Do_Something (Obj : in out Ctrl) is ... -- end Prot; -- procedure Finalize (Obj : in out Ctrl) is -- begin -- Prot.Do_Something (Obj); -- end Finalize; -- end Pkg; -- Since for the most part entities in package bodies depend on -- those in package specs, Prot's lock should be cleaned up -- first. The subsequent cleanup of the spec finalizes Lib_Obj. -- This act however attempts to invoke Do_Something and fails -- because the lock has disappeared. elsif Ekind (Obj_Id) = E_Variable and then not In_Library_Level_Package_Body (Obj_Id) and then Has_Simple_Protected_Object (Obj_Typ) and then not Restricted_Profile then Processing_Actions (Decl, Is_Protected => True); end if; -- Inspect the freeze node of an access-to-controlled type and -- look for a delayed finalization collection. This case arises -- when the freeze actions are inserted at a later time than the -- expansion of the context. Since Build_Finalizer is never called -- on a single construct twice, the collection would be ultimately -- left out and never finalized. This is also needed for freeze -- actions of designated types themselves, since in some cases the -- finalization collection is associated with a designated type's -- freeze node rather than that of the access type (see handling -- for freeze actions in Build_Finalization_Collection). elsif Nkind (Decl) = N_Freeze_Entity and then Present (Actions (Decl)) then Typ := Entity (Decl); -- Freeze nodes for ignored Ghost types do not need cleanup -- actions because they will never appear in the final tree. if Is_Ignored_Ghost_Entity (Typ) then null; elsif (Is_Access_Object_Type (Typ) and then Needs_Finalization (Available_View (Designated_Type (Typ)))) or else (Is_Type (Typ) and then Needs_Finalization (Typ)) then -- Freeze nodes are considered to be identical to packages -- and blocks in terms of nesting. The difference is that -- a finalization collection created inside the freeze node -- is at the same nesting level as the node itself. Process_Declarations (Actions (Decl), Preprocess); end if; -- Nested package declarations, avoid generics elsif Nkind (Decl) = N_Package_Declaration then Pack_Id := Defining_Entity (Decl); Spec := Specification (Decl); -- Do not inspect an ignored Ghost package because all code -- found within will not appear in the final tree. if Is_Ignored_Ghost_Entity (Pack_Id) then null; elsif Ekind (Pack_Id) /= E_Generic_Package then Process_Declarations (Private_Declarations (Spec), Preprocess); Process_Declarations (Visible_Declarations (Spec), Preprocess); end if; -- Nested package bodies, avoid generics elsif Nkind (Decl) = N_Package_Body then Process_Package_Body (Decl); elsif Nkind (Decl) = N_Package_Body_Stub and then Present (Library_Unit (Decl)) then Process_Package_Body (Proper_Body (Unit (Library_Unit (Decl)))); end if; Prev_Non_Pragma (Decl); end loop; end Process_Declarations; -------------------------------- -- Process_Object_Declaration -- -------------------------------- procedure Process_Object_Declaration (Decl : Node_Id; Is_Protected : Boolean := False) is Obj_Id : constant Entity_Id := Defining_Identifier (Decl); Loc : constant Source_Ptr := Sloc (Decl); Fin_Call : Node_Id; Fin_Id : Entity_Id; Master_Node_Attach : Node_Id; Master_Node_Decl : Node_Id; Master_Node_Id : Entity_Id; Master_Node_Ins : Node_Id; Master_Node_Loc : Source_Ptr; Obj_Ref : Node_Id; Obj_Typ : Entity_Id; -- Start of processing for Process_Object_Declaration begin -- Handle the object type and the reference to the object. Note -- that objects having simple protected components or of a CW type -- must retain their original type for the processing below to work. Obj_Ref := New_Occurrence_Of (Obj_Id, Loc); Obj_Typ := Etype (Obj_Id); if not Is_Protected and then not Is_Class_Wide_Type (Obj_Typ) then Obj_Typ := Base_Type (Obj_Typ); end if; if Is_Access_Type (Obj_Typ) then Obj_Ref := Make_Explicit_Dereference (Loc, Obj_Ref); Obj_Typ := Available_View (Designated_Type (Obj_Typ)); end if; -- If the object is a Master_Node, then nothing to do, except if it -- is the only object, in which case we move its declaration, call -- marker (if any) and initialization call, as well as mark it to -- avoid double processing. if Is_RTE (Obj_Typ, RE_Master_Node) then Master_Node_Id := Obj_Id; if Counter_Val = 1 then if Nkind (Next (Decl)) = N_Call_Marker then Prepend_To (Decls, Remove_Next (Next (Decl))); end if; Prepend_To (Decls, Remove_Next (Decl)); Remove (Decl); Prepend_To (Decls, Decl); Set_Is_Ignored_For_Finalization (Obj_Id); end if; -- Create the declaration of the Master_Node for the object and -- insert it before the declaration of the object itself, except -- for the case where it is the only object because it will play -- the role of a degenerated master and therefore needs to be -- inserted at the same place the master would have been. else pragma Assert (No (Finalization_Master_Node (Obj_Id))); -- For one object, use the Sloc the master would have had if Counter_Val = 1 then Master_Node_Loc := Sloc (N); else Master_Node_Loc := Loc; end if; Master_Node_Id := Make_Defining_Identifier (Master_Node_Loc, Chars => New_External_Name (Chars (Obj_Id), Suffix => "MN")); Master_Node_Decl := Make_Master_Node_Declaration (Master_Node_Loc, Master_Node_Id, Obj_Id); Push_Scope (Scope (Obj_Id)); if Counter_Val = 1 then Prepend_To (Decls, Master_Node_Decl); else Insert_Before (Decl, Master_Node_Decl); end if; Analyze (Master_Node_Decl); Pop_Scope; -- Mark the Master_Node to avoid double processing Set_Is_Ignored_For_Finalization (Master_Node_Id); end if; -- Attach the Master_Node after all initialization has been done. The -- place of insertion depends on the context. if Ekind (Obj_Id) in E_Constant | E_Variable then -- The object is initialized by a build-in-place function call. -- The Master_Node insertion point is after the function call. if Present (BIP_Initialization_Call (Obj_Id)) then Master_Node_Ins := BIP_Initialization_Call (Obj_Id); -- The object is initialized by an aggregate. The Master_Node -- insertion point is after the last aggregate assignment. elsif Present (Last_Aggregate_Assignment (Obj_Id)) then Master_Node_Ins := Last_Aggregate_Assignment (Obj_Id); -- In other cases the Master_Node is inserted after the last call -- to either [Deep_]Initialize or the type-specific init proc. else Master_Node_Ins := Find_Last_Init (Decl); end if; -- In all other cases the Master_Node is inserted after the last call -- to either [Deep_]Initialize or the type-specific init proc. else Master_Node_Ins := Find_Last_Init (Decl); end if; -- If the Initialize function is null or trivial, the call will have -- been replaced with a null statement and we place the attachment -- of the Master_Node after the declaration of the object itself. if No (Master_Node_Ins) then Master_Node_Ins := Decl; end if; -- Processing for simple protected objects. Such objects require -- manual finalization of their lock managers. Generate: -- procedure obj_typ_nnFD (v : system__address) is -- type Ptr_Typ is access all Obj_Typ; -- Rnn : Obj_Typ renames Ptr_Typ!(v).all; -- begin -- $system__tasking__protected_objects__finalize_protection -- (Obj_TypV!(Rnn)._object); -- exception -- when others => -- null; -- end obj_typ_nnFD; if Is_Protected or else (Has_Simple_Protected_Object (Obj_Typ) and then No (Finalize_Address (Obj_Typ))) then declare Param : constant Entity_Id := Make_Defining_Identifier (Loc, Name_V); Ptr_Typ : constant Entity_Id := Make_Temporary (Loc, 'P'); Ren_Id : constant Entity_Id := Make_Temporary (Loc, 'R'); Ren_Ref : constant Node_Id := New_Occurrence_Of (Ren_Id, Loc); Fin_Body : Node_Id; Fin_Call : Node_Id; Fin_Stmts : List_Id := No_List; HSS : Node_Id; begin Set_Etype (Ren_Ref, Obj_Typ); if Is_Simple_Protected_Type (Obj_Typ) then Fin_Call := Cleanup_Protected_Object (Decl, Ren_Ref); if Present (Fin_Call) then Fin_Stmts := New_List (Fin_Call); end if; elsif Is_Array_Type (Obj_Typ) then Fin_Stmts := Cleanup_Array (Decl, Ren_Ref, Obj_Typ); else Fin_Stmts := Cleanup_Record (Decl, Ren_Ref, Obj_Typ); end if; if No (Fin_Stmts) then return; end if; HSS := Make_Handled_Sequence_Of_Statements (Loc, Statements => Fin_Stmts); if Exceptions_OK then Set_Exception_Handlers (HSS, New_List ( Make_Exception_Handler (Loc, Exception_Choices => New_List ( Make_Others_Choice (Loc)), Statements => New_List ( Make_Null_Statement (Loc))))); end if; Fin_Id := Make_Defining_Identifier (Loc, Make_TSS_Name_Local (Obj_Typ, TSS_Finalize_Address)); Fin_Body := Make_Subprogram_Body (Loc, Specification => Make_Procedure_Specification (Loc, Defining_Unit_Name => Fin_Id, Parameter_Specifications => New_List ( Make_Parameter_Specification (Loc, Defining_Identifier => Param, Parameter_Type => New_Occurrence_Of (RTE (RE_Address), Loc)))), Declarations => New_List ( Make_Full_Type_Declaration (Loc, Defining_Identifier => Ptr_Typ, Type_Definition => Make_Access_To_Object_Definition (Loc, All_Present => True, Subtype_Indication => New_Occurrence_Of (Obj_Typ, Loc))), Make_Object_Renaming_Declaration (Loc, Defining_Identifier => Ren_Id, Subtype_Mark => New_Occurrence_Of (Obj_Typ, Loc), Name => Make_Explicit_Dereference (Loc, Prefix => Unchecked_Convert_To (Ptr_Typ, New_Occurrence_Of (Param, Loc))))), Handled_Statement_Sequence => HSS); Push_Scope (Scope (Obj_Id)); Insert_After_And_Analyze (Master_Node_Ins, Fin_Body, Suppress => All_Checks); Pop_Scope; Master_Node_Ins := Fin_Body; end; -- If the object's subtype is an array that has a constrained first -- subtype and is not this first subtype, we need to build a special -- Finalize_Address primitive for the object's subtype because the -- Finalize_Address primitive of the base type has been tailored to -- the first subtype (see Make_Finalize_Address_Stmts). Generate: -- procedure obj_typ_nnFD (v : system__address) is -- type Ptr_Typ is access all Obj_Typ; -- begin -- obj_typBDF (Ptr_Typ!(v).all, f => true); -- end obj_typ_nnFD; elsif Is_Array_Type (Etype (Obj_Id)) and then Is_Constrained (First_Subtype (Etype (Obj_Id))) and then Etype (Obj_Id) /= First_Subtype (Etype (Obj_Id)) then declare Ptr_Typ : constant Node_Id := Make_Temporary (Loc, 'P'); Param : constant Entity_Id := Make_Defining_Identifier (Loc, Name_V); Fin_Body : Node_Id; begin Obj_Typ := Etype (Obj_Id); Fin_Id := Make_Defining_Identifier (Loc, Make_TSS_Name_Local (Obj_Typ, TSS_Finalize_Address)); Fin_Body := Make_Subprogram_Body (Loc, Specification => Make_Procedure_Specification (Loc, Defining_Unit_Name => Fin_Id, Parameter_Specifications => New_List ( Make_Parameter_Specification (Loc, Defining_Identifier => Param, Parameter_Type => New_Occurrence_Of (RTE (RE_Address), Loc)))), Declarations => New_List ( Make_Full_Type_Declaration (Loc, Defining_Identifier => Ptr_Typ, Type_Definition => Make_Access_To_Object_Definition (Loc, All_Present => True, Subtype_Indication => New_Occurrence_Of (Obj_Typ, Loc)))), Handled_Statement_Sequence => Make_Handled_Sequence_Of_Statements (Loc, Statements => New_List ( Make_Final_Call ( Obj_Ref => Make_Explicit_Dereference (Loc, Prefix => Unchecked_Convert_To (Ptr_Typ, Make_Identifier (Loc, Name_V))), Typ => Obj_Typ)))); Push_Scope (Scope (Obj_Id)); Insert_After_And_Analyze (Master_Node_Ins, Fin_Body, Suppress => All_Checks); Pop_Scope; Master_Node_Ins := Fin_Body; end; else Fin_Id := Finalize_Address (Obj_Typ); if No (Fin_Id) and then Ekind (Obj_Typ) = E_Class_Wide_Subtype then Fin_Id := TSS (Obj_Typ, TSS_Finalize_Address); end if; end if; -- Now build the attachment call that will initialize the object's -- Master_Node using the object's address and type's finalization -- procedure and then attach the Master_Node to the master, unless -- there is a single controlled object. if Counter_Val = 1 then -- Finalize_Address is not generated in CodePeer mode because the -- body contains address arithmetic. So we don't want to generate -- the attach in this case. Ditto if the object is a Master_Node. if CodePeer_Mode or else Obj_Id = Master_Node_Id then Master_Node_Attach := Make_Null_Statement (Loc); else Master_Node_Attach := Make_Procedure_Call_Statement (Loc, Name => New_Occurrence_Of (RTE (RE_Attach_Object_To_Node), Loc), Parameter_Associations => New_List ( Make_Address_For_Finalize (Loc, Obj_Ref, Obj_Typ), Make_Attribute_Reference (Loc, Prefix => New_Occurrence_Of (Fin_Id, Loc), Attribute_Name => Name_Unrestricted_Access), New_Occurrence_Of (Master_Node_Id, Loc))); end if; -- We also generate the direct finalization call here Fin_Call := Make_Procedure_Call_Statement (Loc, Name => New_Occurrence_Of (RTE (RE_Finalize_Object), Loc), Parameter_Associations => New_List ( New_Occurrence_Of (Master_Node_Id, Loc))); -- For CodePeer, the exception handlers normally generated here -- generate complex flowgraphs which result in capacity problems. -- Omitting these handlers for CodePeer is justified as follows: -- If a handler is dead, then omitting it is surely ok -- If a handler is live, then CodePeer should flag the -- potentially-exception-raising construct that causes it -- to be live. That is what we are interested in, not what -- happens after the exception is raised. if Exceptions_OK and not CodePeer_Mode then Fin_Call := Make_Block_Statement (Loc, Handled_Statement_Sequence => Make_Handled_Sequence_Of_Statements (Loc, Statements => New_List (Fin_Call), Exception_Handlers => New_List ( Build_Exception_Handler (Finalizer_Data, For_Package)))); end if; Append_To (Finalizer_Stmts, Fin_Call); else -- If the object is a Master_Node, we just need to chain it if Obj_Id = Master_Node_Id then Master_Node_Attach := Make_Procedure_Call_Statement (Loc, Name => New_Occurrence_Of (RTE (RE_Chain_Node_To_Master), Loc), Parameter_Associations => New_List ( Make_Attribute_Reference (Loc, Prefix => New_Occurrence_Of (Obj_Id, Loc), Attribute_Name => Name_Unrestricted_Access), New_Occurrence_Of (Finalization_Master, Loc))); -- Finalize_Address is not generated in CodePeer mode because the -- body contains address arithmetic. So we don't want to generate -- the attach in this case. elsif CodePeer_Mode then Master_Node_Attach := Make_Null_Statement (Loc); else Master_Node_Attach := Make_Procedure_Call_Statement (Loc, Name => New_Occurrence_Of (RTE (RE_Attach_Object_To_Master), Loc), Parameter_Associations => New_List ( Make_Address_For_Finalize (Loc, Obj_Ref, Obj_Typ), Make_Attribute_Reference (Loc, Prefix => New_Occurrence_Of (Fin_Id, Loc), Attribute_Name => Name_Unrestricted_Access), Make_Attribute_Reference (Loc, Prefix => New_Occurrence_Of (Master_Node_Id, Loc), Attribute_Name => Name_Unrestricted_Access), New_Occurrence_Of (Finalization_Master, Loc))); end if; end if; Insert_After_And_Analyze (Master_Node_Ins, Master_Node_Attach, Suppress => All_Checks); end Process_Object_Declaration; ------------------------------------- -- Process_Tagged_Type_Declaration -- ------------------------------------- procedure Process_Tagged_Type_Declaration (Decl : Node_Id) is Typ : constant Entity_Id := Defining_Identifier (Decl); DT_Ptr : constant Entity_Id := Node (First_Elmt (Access_Disp_Table (Typ))); begin -- Generate: -- Ada.Tags.Unregister_Tag (P); Append_To (Tagged_Type_Stmts, Make_Procedure_Call_Statement (Loc, Name => New_Occurrence_Of (RTE (RE_Unregister_Tag), Loc), Parameter_Associations => New_List ( New_Occurrence_Of (DT_Ptr, Loc)))); end Process_Tagged_Type_Declaration; -- Start of processing for Build_Finalizer begin Fin_Id := Empty; -- Do not perform this expansion in SPARK mode because it is not -- necessary. if GNATprove_Mode then return; end if; -- Step 1: Extract all lists which may contain controlled objects or -- library-level tagged types. if For_Package_Spec then Decls := Visible_Declarations (Specification (N)); Priv_Decls := Private_Declarations (Specification (N)); -- Retrieve the package spec id Spec_Id := Defining_Unit_Name (Specification (N)); if Nkind (Spec_Id) = N_Defining_Program_Unit_Name then Spec_Id := Defining_Identifier (Spec_Id); end if; -- Accept statement, block, entry body, package body, protected body, -- subprogram body or task body. else Decls := Declarations (N); HSS := Handled_Statement_Sequence (N); if Present (HSS) then if Present (Statements (HSS)) then Stmts := Statements (HSS); end if; if Present (At_End_Proc (HSS)) then Prev_At_End := At_End_Proc (HSS); end if; end if; -- Retrieve the package spec id for package bodies if For_Package_Body then Spec_Id := Corresponding_Spec (N); end if; end if; -- We do not need to process nested packages since they are handled by -- the finalizer of the enclosing scope, including at library level. -- And we do not build two finalizers for an instance without body that -- is a library unit (see Analyze_Package_Instantiation). if For_Package and then (not Is_Compilation_Unit (Spec_Id) or else (Is_Generic_Instance (Spec_Id) and then Package_Instantiation (Spec_Id) = N)) then return; end if; -- Step 2: Object [pre]processing if For_Package then -- For package specs and bodies, we are invoked from the Standard -- scope, so we need to push the specs onto the scope stack first. Push_Scope (Spec_Id); -- Preprocess the visible declarations now in order to obtain the -- correct number of controlled object by the time the private -- declarations are processed. Process_Declarations (Decls, Preprocess => True); -- From all the possible contexts, only package specifications may -- have private declarations. if For_Package_Spec then Process_Declarations (Priv_Decls, Preprocess => True); end if; -- The current context may lack controlled objects, but require some -- other form of completion (task termination for instance). In such -- cases, the finalizer must be created and carry the additional -- statements. if Acts_As_Clean or else Has_Ctrl_Objs or else Has_Tagged_Types then Build_Components; end if; -- The preprocessing has determined that the context has controlled -- objects or library-level tagged types. if Has_Ctrl_Objs or else Has_Tagged_Types then -- Private declarations are processed first in order to preserve -- possible dependencies between public and private objects. if For_Package_Spec then Process_Declarations (Priv_Decls); end if; Process_Declarations (Decls); end if; -- Non-package case else -- Preprocess both declarations and statements Process_Declarations (Decls, Preprocess => True); Process_Declarations (Stmts, Preprocess => True); -- At this point it is known that N has controlled objects. Ensure -- that N has a declarative list since the finalizer spec will be -- attached to it. if Has_Ctrl_Objs and then No (Decls) then Set_Declarations (N, New_List); Decls := Declarations (N); Spec_Decls := Decls; end if; -- The current context may lack controlled objects, but require some -- other form of completion (task termination for instance). In such -- cases, the finalizer must be created and carry the additional -- statements. if Acts_As_Clean or else Has_Ctrl_Objs or else Has_Tagged_Types then Build_Components; end if; if Has_Ctrl_Objs or else Has_Tagged_Types then Process_Declarations (Stmts); Process_Declarations (Decls); end if; end if; -- Step 3: Finalizer creation if Acts_As_Clean or else Has_Ctrl_Objs or else Has_Tagged_Types then Create_Finalizer; end if; -- Pop the scope that was pushed above for package specs and bodies if For_Package then Pop_Scope; end if; end Build_Finalizer; -------------------------- -- Build_Finalizer_Call -- -------------------------- procedure Build_Finalizer_Call (N : Node_Id; Fin_Id : Entity_Id) is begin -- Do not perform this expansion in SPARK mode because we do not create -- finalizers in the first place. if GNATprove_Mode then return; end if; -- If the construct to be cleaned up is a protected subprogram body, the -- finalizer call needs to be associated with the block that wraps the -- unprotected version of the subprogram. The following illustrates this -- scenario: -- procedure Prot_SubpP is -- procedure finalizer is -- begin -- Service_Entries (Prot_Obj); -- Abort_Undefer; -- end finalizer; -- begin -- . . . -- begin -- Prot_SubpN (Prot_Obj); -- at end -- finalizer; -- end; -- end Prot_SubpP; declare Loc : constant Source_Ptr := Sloc (N); Is_Protected_Subp_Body : constant Boolean := Nkind (N) = N_Subprogram_Body and then Is_Protected_Subprogram_Body (N); -- True if N is the protected version of a subprogram that belongs to -- a protected type. HSS : constant Node_Id := (if Is_Protected_Subp_Body then Handled_Statement_Sequence (Last (Statements (Handled_Statement_Sequence (N)))) else Handled_Statement_Sequence (N)); -- We attach the At_End_Proc to the HSS if this is an accept -- statement or extended return statement. Also in the case of -- a protected subprogram, because if Service_Entries raises an -- exception, we do not lock the PO, so we also do not want to -- unlock it. Use_HSS : constant Boolean := Nkind (N) in N_Accept_Statement | N_Extended_Return_Statement or else Is_Protected_Subp_Body; At_End_Proc_Bearer : constant Node_Id := (if Use_HSS then HSS else N); begin pragma Assert (No (At_End_Proc (At_End_Proc_Bearer))); Set_At_End_Proc (At_End_Proc_Bearer, New_Occurrence_Of (Fin_Id, Loc)); -- Attach reference to finalizer to tree, for LLVM use Set_Parent (At_End_Proc (At_End_Proc_Bearer), At_End_Proc_Bearer); Analyze (At_End_Proc (At_End_Proc_Bearer)); Expand_At_End_Handler (At_End_Proc_Bearer, Empty); end; end Build_Finalizer_Call; --------------------- -- Build_Late_Proc -- --------------------- procedure Build_Late_Proc (Typ : Entity_Id; Nam : Name_Id) is begin for Final_Prim in Name_Of'Range loop if Name_Of (Final_Prim) = Nam then Set_TSS (Typ, Make_Deep_Proc (Prim => Final_Prim, Typ => Typ, Stmts => Make_Deep_Record_Body (Final_Prim, Typ))); end if; end loop; end Build_Late_Proc; ------------------------------- -- Build_Object_Declarations -- ------------------------------- procedure Build_Object_Declarations (Data : out Finalization_Exception_Data; Decls : List_Id; Loc : Source_Ptr; For_Package : Boolean := False) is Decl : Node_Id; Dummy : Entity_Id; -- This variable captures an unused dummy internal entity, see the -- comment associated with its use. begin pragma Assert (Decls /= No_List); -- Always set the proper location as it may be needed even when -- exception propagation is forbidden. Data.Loc := Loc; if Restriction_Active (No_Exception_Propagation) then Data.Abort_Id := Empty; Data.E_Id := Empty; Data.Raised_Id := Empty; return; end if; Data.Raised_Id := Make_Temporary (Loc, 'R'); -- In certain scenarios, finalization can be triggered by an abort. If -- the finalization itself fails and raises an exception, the resulting -- Program_Error must be supressed and replaced by an abort signal. In -- order to detect this scenario, save the state of entry into the -- finalization code. -- This is not needed for library-level finalizers as they are called by -- the environment task and cannot be aborted. if not For_Package then if Abort_Allowed then Data.Abort_Id := Make_Temporary (Loc, 'A'); -- Generate: -- Abort_Id : constant Boolean := ; Append_To (Decls, Make_Object_Declaration (Loc, Defining_Identifier => Data.Abort_Id, Constant_Present => True, Object_Definition => New_Occurrence_Of (Standard_Boolean, Loc), Expression => New_Occurrence_Of (RTE (RE_Triggered_By_Abort), Loc))); -- Abort is not required else -- Generate a dummy entity to ensure that the internal symbols are -- in sync when a unit is compiled with and without aborts. Dummy := Make_Temporary (Loc, 'A'); Data.Abort_Id := Empty; end if; -- Library-level finalizers else Data.Abort_Id := Empty; end if; if Exception_Extra_Info then Data.E_Id := Make_Temporary (Loc, 'E'); -- Generate: -- E_Id : Exception_Occurrence; Decl := Make_Object_Declaration (Loc, Defining_Identifier => Data.E_Id, Object_Definition => New_Occurrence_Of (RTE (RE_Exception_Occurrence), Loc)); Set_No_Initialization (Decl); Append_To (Decls, Decl); else Data.E_Id := Empty; end if; -- Generate: -- Raised_Id : Boolean := False; Append_To (Decls, Make_Object_Declaration (Loc, Defining_Identifier => Data.Raised_Id, Object_Definition => New_Occurrence_Of (Standard_Boolean, Loc), Expression => New_Occurrence_Of (Standard_False, Loc))); if Debug_Generated_Code then Set_Debug_Info_Needed (Data.Raised_Id); end if; end Build_Object_Declarations; --------------------------- -- Build_Raise_Statement -- --------------------------- function Build_Raise_Statement (Data : Finalization_Exception_Data) return Node_Id is Stmt : Node_Id; Expr : Node_Id; begin -- Standard run-time use the specialized routine -- Raise_From_Controlled_Operation. if Exception_Extra_Info and then RTE_Available (RE_Raise_From_Controlled_Operation) then Stmt := Make_Procedure_Call_Statement (Data.Loc, Name => New_Occurrence_Of (RTE (RE_Raise_From_Controlled_Operation), Data.Loc), Parameter_Associations => New_List (New_Occurrence_Of (Data.E_Id, Data.Loc))); -- Restricted run-time: exception messages are not supported and hence -- Raise_From_Controlled_Operation is not supported. Raise Program_Error -- instead. else Stmt := Make_Raise_Program_Error (Data.Loc, Reason => PE_Finalize_Raised_Exception); end if; -- Generate: -- Raised_Id and then not Abort_Id -- -- Raised_Id Expr := New_Occurrence_Of (Data.Raised_Id, Data.Loc); if Present (Data.Abort_Id) then Expr := Make_And_Then (Data.Loc, Left_Opnd => Expr, Right_Opnd => Make_Op_Not (Data.Loc, Right_Opnd => New_Occurrence_Of (Data.Abort_Id, Data.Loc))); end if; -- Generate: -- if Raised_Id and then not Abort_Id then -- Raise_From_Controlled_Operation (E_Id); -- -- raise Program_Error; -- restricted runtime -- end if; return Make_If_Statement (Data.Loc, Condition => Expr, Then_Statements => New_List (Stmt)); end Build_Raise_Statement; ----------------------------- -- Build_Record_Deep_Procs -- ----------------------------- procedure Build_Record_Deep_Procs (Typ : Entity_Id) is begin Set_TSS (Typ, Make_Deep_Proc (Prim => Initialize_Case, Typ => Typ, Stmts => Make_Deep_Record_Body (Initialize_Case, Typ))); if not Is_Inherently_Limited_Type (Typ) then Set_TSS (Typ, Make_Deep_Proc (Prim => Adjust_Case, Typ => Typ, Stmts => Make_Deep_Record_Body (Adjust_Case, Typ))); end if; -- Do not generate Deep_Finalize and Finalize_Address if finalization is -- suppressed since these routine will not be used. if not Restriction_Active (No_Finalization) then Set_TSS (Typ, Make_Deep_Proc (Prim => Finalize_Case, Typ => Typ, Stmts => Make_Deep_Record_Body (Finalize_Case, Typ))); -- Create TSS primitive Finalize_Address (unless CodePeer_Mode) if not CodePeer_Mode then Set_TSS (Typ, Make_Deep_Proc (Prim => Address_Case, Typ => Typ, Stmts => Make_Deep_Record_Body (Address_Case, Typ))); end if; end if; end Build_Record_Deep_Procs; ------------------- -- Cleanup_Array -- ------------------- function Cleanup_Array (N : Node_Id; Obj : Node_Id; Typ : Entity_Id) return List_Id is Loc : constant Source_Ptr := Sloc (N); Index_List : constant List_Id := New_List; function Free_Component return List_Id; -- Generate the code to finalize the task or protected subcomponents -- of a single component of the array. function Free_One_Dimension (Dim : Int) return List_Id; -- Generate a loop over one dimension of the array -------------------- -- Free_Component -- -------------------- function Free_Component return List_Id is Stmts : List_Id := New_List; Tsk : Node_Id; C_Typ : constant Entity_Id := Component_Type (Typ); begin -- Component type is known to contain tasks or protected objects Tsk := Make_Indexed_Component (Loc, Prefix => Duplicate_Subexpr_No_Checks (Obj), Expressions => Index_List); Set_Etype (Tsk, C_Typ); if Is_Task_Type (C_Typ) then Append_To (Stmts, Cleanup_Task (N, Tsk)); elsif Is_Simple_Protected_Type (C_Typ) then Append_To (Stmts, Cleanup_Protected_Object (N, Tsk)); elsif Is_Record_Type (C_Typ) then Stmts := Cleanup_Record (N, Tsk, C_Typ); elsif Is_Array_Type (C_Typ) then Stmts := Cleanup_Array (N, Tsk, C_Typ); end if; return Stmts; end Free_Component; ------------------------ -- Free_One_Dimension -- ------------------------ function Free_One_Dimension (Dim : Int) return List_Id is Index : Entity_Id; begin if Dim > Number_Dimensions (Typ) then return Free_Component; -- Here we generate the required loop else Index := Make_Temporary (Loc, 'J'); Append (New_Occurrence_Of (Index, Loc), Index_List); return New_List ( Make_Implicit_Loop_Statement (N, Identifier => Empty, Iteration_Scheme => Make_Iteration_Scheme (Loc, Loop_Parameter_Specification => Make_Loop_Parameter_Specification (Loc, Defining_Identifier => Index, Discrete_Subtype_Definition => Make_Attribute_Reference (Loc, Prefix => Duplicate_Subexpr (Obj), Attribute_Name => Name_Range, Expressions => New_List ( Make_Integer_Literal (Loc, Dim))))), Statements => Free_One_Dimension (Dim + 1))); end if; end Free_One_Dimension; -- Start of processing for Cleanup_Array begin return Free_One_Dimension (1); end Cleanup_Array; -------------------- -- Cleanup_Record -- -------------------- function Cleanup_Record (N : Node_Id; Obj : Node_Id; Typ : Entity_Id) return List_Id is Loc : constant Source_Ptr := Sloc (N); Stmts : constant List_Id := New_List; U_Typ : constant Entity_Id := Underlying_Type (Typ); Comp : Entity_Id; Tsk : Node_Id; begin if Has_Discriminants (U_Typ) and then Nkind (Parent (U_Typ)) = N_Full_Type_Declaration and then Nkind (Type_Definition (Parent (U_Typ))) = N_Record_Definition and then Present (Variant_Part (Component_List (Type_Definition (Parent (U_Typ))))) then -- For now, do not attempt to free a component that may appear in a -- variant, and instead issue a warning. Doing this "properly" would -- require building a case statement and would be quite a mess. Note -- that the RM only requires that free "work" for the case of a task -- access value, so already we go way beyond this in that we deal -- with the array case and non-discriminated record cases. Error_Msg_N ("task/protected object in variant record will not be freed??", N); return New_List (Make_Null_Statement (Loc)); end if; Comp := First_Component (U_Typ); while Present (Comp) loop if Chars (Comp) /= Name_uParent and then (Has_Task (Etype (Comp)) or else Has_Simple_Protected_Object (Etype (Comp))) then Tsk := Make_Selected_Component (Loc, Prefix => Duplicate_Subexpr_No_Checks (Obj), Selector_Name => New_Occurrence_Of (Comp, Loc)); Set_Etype (Tsk, Etype (Comp)); if Is_Task_Type (Etype (Comp)) then Append_To (Stmts, Cleanup_Task (N, Tsk)); elsif Is_Simple_Protected_Type (Etype (Comp)) then Append_To (Stmts, Cleanup_Protected_Object (N, Tsk)); elsif Is_Record_Type (Etype (Comp)) then -- Recurse, by generating the prefix of the argument to the -- eventual cleanup call. Append_List_To (Stmts, Cleanup_Record (N, Tsk, Etype (Comp))); elsif Is_Array_Type (Etype (Comp)) then Append_List_To (Stmts, Cleanup_Array (N, Tsk, Etype (Comp))); end if; end if; Next_Component (Comp); end loop; return Stmts; end Cleanup_Record; ------------------------------ -- Cleanup_Protected_Object -- ------------------------------ function Cleanup_Protected_Object (N : Node_Id; Ref : Node_Id) return Node_Id is Loc : constant Source_Ptr := Sloc (N); begin -- For restricted run-time libraries (Ravenscar), tasks are -- non-terminating, and protected objects can only appear at library -- level, so we do not want finalization of protected objects. if Restricted_Profile then return Empty; else return Make_Procedure_Call_Statement (Loc, Name => New_Occurrence_Of (RTE (RE_Finalize_Protection), Loc), Parameter_Associations => New_List (Concurrent_Ref (Ref))); end if; end Cleanup_Protected_Object; ------------------ -- Cleanup_Task -- ------------------ function Cleanup_Task (N : Node_Id; Ref : Node_Id) return Node_Id is Loc : constant Source_Ptr := Sloc (N); begin -- For restricted run-time libraries (Ravenscar), tasks are -- non-terminating and they can only appear at library level, -- so we do not want finalization of task objects. if Restricted_Profile then return Empty; else return Make_Procedure_Call_Statement (Loc, Name => New_Occurrence_Of (RTE (RE_Free_Task), Loc), Parameter_Associations => New_List (Concurrent_Ref (Ref))); end if; end Cleanup_Task; -------------------------------------- -- Check_Unnesting_Elaboration_Code -- -------------------------------------- procedure Check_Unnesting_Elaboration_Code (N : Node_Id) is Loc : constant Source_Ptr := Sloc (N); Block_Elab_Proc : Entity_Id := Empty; procedure Set_Block_Elab_Proc; -- Create a defining identifier for a procedure that will replace -- a block with nested subprograms (unless it has already been created, -- in which case this is a no-op). procedure Set_Block_Elab_Proc is begin if No (Block_Elab_Proc) then Block_Elab_Proc := Make_Temporary (Loc, 'I'); end if; end Set_Block_Elab_Proc; procedure Reset_Scopes_To_Block_Elab_Proc (L : List_Id); -- Find entities in the elaboration code of a library package body that -- contain or represent a subprogram body. A body can appear within a -- block or a loop or can appear by itself if generated for an object -- declaration that involves controlled actions. The first such entity -- forces creation of a new procedure entity (via Set_Block_Elab_Proc) -- that will be used to reset the scopes of all entities that become -- local to the new elaboration procedure. This is needed for subsequent -- unnesting actions, which depend on proper setting of the Scope links -- to determine the nesting level of each subprogram. -------------------------------------- -- Reset_Scopes_To_Block_Elab_Proc -- -------------------------------------- Maybe_Reset_Scopes_For_Decl : constant Elist_Id := New_Elmt_List; procedure Reset_Scopes_To_Block_Elab_Proc (L : List_Id) is Id : Entity_Id; Stat : Node_Id; Node : Node_Id; begin Stat := First (L); while Present (Stat) loop case Nkind (Stat) is when N_Block_Statement => if Present (Identifier (Stat)) then Id := Entity (Identifier (Stat)); -- The Scope of this block needs to be reset to the new -- procedure if the block contains nested subprograms. if Present (Id) and then Contains_Subprogram (Id) then Set_Block_Elab_Proc; Set_Scope (Id, Block_Elab_Proc); end if; end if; when N_Loop_Statement => Id := Entity (Identifier (Stat)); if Present (Id) and then Contains_Subprogram (Id) then if Scope (Id) = Current_Scope then Set_Block_Elab_Proc; Set_Scope (Id, Block_Elab_Proc); end if; end if; -- We traverse the loop's statements as well, which may -- include other block (etc.) statements that need to have -- their Scope set to Block_Elab_Proc. (Is this really the -- case, or do such nested blocks refer to the loop scope -- rather than the loop's enclosing scope???.) Reset_Scopes_To_Block_Elab_Proc (Statements (Stat)); when N_If_Statement => Reset_Scopes_To_Block_Elab_Proc (Then_Statements (Stat)); Reset_Scopes_To_Block_Elab_Proc (Else_Statements (Stat)); Node := First (Elsif_Parts (Stat)); while Present (Node) loop Reset_Scopes_To_Block_Elab_Proc (Then_Statements (Node)); Next (Node); end loop; when N_Case_Statement => Node := First (Alternatives (Stat)); while Present (Node) loop Reset_Scopes_To_Block_Elab_Proc (Statements (Node)); Next (Node); end loop; -- Reset the Scope of a subprogram and object declaration -- occurring at the top level when N_Subprogram_Body => Id := Defining_Entity (Stat); Set_Block_Elab_Proc; Set_Scope (Id, Block_Elab_Proc); when N_Object_Declaration | N_Object_Renaming_Declaration => Id := Defining_Entity (Stat); if No (Block_Elab_Proc) then Append_Elmt (Id, Maybe_Reset_Scopes_For_Decl); else Set_Scope (Id, Block_Elab_Proc); end if; when others => null; end case; Next (Stat); end loop; -- If we are creating an Elab procedure, move all the gathered -- declarations in its scope. if Present (Block_Elab_Proc) then while not Is_Empty_Elmt_List (Maybe_Reset_Scopes_For_Decl) loop Set_Scope (Elists.Node (Last_Elmt (Maybe_Reset_Scopes_For_Decl)), Block_Elab_Proc); Remove_Last_Elmt (Maybe_Reset_Scopes_For_Decl); end loop; end if; end Reset_Scopes_To_Block_Elab_Proc; -- Local variables H_Seq : constant Node_Id := Handled_Statement_Sequence (N); Elab_Body : Node_Id; Elab_Call : Node_Id; -- Start of processing for Check_Unnesting_Elaboration_Code begin if Present (H_Seq) then Reset_Scopes_To_Block_Elab_Proc (Statements (H_Seq)); -- There may be subprograms declared in the exception handlers -- of the current body. if Present (Exception_Handlers (H_Seq)) then declare Handler : Node_Id := First (Exception_Handlers (H_Seq)); begin while Present (Handler) loop Reset_Scopes_To_Block_Elab_Proc (Statements (Handler)); Next (Handler); end loop; end; end if; if Present (Block_Elab_Proc) then Elab_Body := Make_Subprogram_Body (Loc, Specification => Make_Procedure_Specification (Loc, Defining_Unit_Name => Block_Elab_Proc), Declarations => New_List, Handled_Statement_Sequence => Relocate_Node (Handled_Statement_Sequence (N))); Elab_Call := Make_Procedure_Call_Statement (Loc, Name => New_Occurrence_Of (Block_Elab_Proc, Loc)); Append_To (Declarations (N), Elab_Body); Analyze (Elab_Body); Set_Has_Nested_Subprogram (Block_Elab_Proc); Set_Handled_Statement_Sequence (N, Make_Handled_Sequence_Of_Statements (Loc, Statements => New_List (Elab_Call))); Analyze (Elab_Call); -- Could we reset the scopes of entities associated with the new -- procedure here via a loop over entities rather than doing it in -- the recursive Reset_Scopes_To_Elab_Proc procedure??? end if; end if; end Check_Unnesting_Elaboration_Code; --------------------------------------- -- Check_Unnesting_In_Decls_Or_Stmts -- --------------------------------------- procedure Check_Unnesting_In_Decls_Or_Stmts (Decls_Or_Stmts : List_Id) is Decl_Or_Stmt : Node_Id; begin if Unnest_Subprogram_Mode and then Present (Decls_Or_Stmts) then Decl_Or_Stmt := First (Decls_Or_Stmts); while Present (Decl_Or_Stmt) loop if Nkind (Decl_Or_Stmt) = N_Block_Statement and then Contains_Subprogram (Entity (Identifier (Decl_Or_Stmt))) then Unnest_Block (Decl_Or_Stmt); -- If-statements may contain subprogram bodies at the outer level -- of their statement lists, and the subprograms may make up-level -- references (such as to objects declared in the same statement -- list). Unlike block and loop cases, however, we don't have an -- entity on which to test the Contains_Subprogram flag, so -- Unnest_If_Statement must traverse the statement lists to -- determine whether there are nested subprograms present. elsif Nkind (Decl_Or_Stmt) = N_If_Statement then Unnest_If_Statement (Decl_Or_Stmt); elsif Nkind (Decl_Or_Stmt) = N_Loop_Statement then declare Id : constant Entity_Id := Entity (Identifier (Decl_Or_Stmt)); begin -- When a top-level loop within declarations of a library -- package spec or body contains nested subprograms, we wrap -- it in a procedure to handle possible up-level references -- to entities associated with the loop (such as loop -- parameters). if Present (Id) and then Contains_Subprogram (Id) then Unnest_Loop (Decl_Or_Stmt); end if; end; elsif Nkind (Decl_Or_Stmt) = N_Package_Declaration and then not Modify_Tree_For_C then Check_Unnesting_In_Decls_Or_Stmts (Visible_Declarations (Specification (Decl_Or_Stmt))); Check_Unnesting_In_Decls_Or_Stmts (Private_Declarations (Specification (Decl_Or_Stmt))); elsif Nkind (Decl_Or_Stmt) = N_Package_Body and then not Modify_Tree_For_C then Check_Unnesting_In_Decls_Or_Stmts (Declarations (Decl_Or_Stmt)); if Present (Statements (Handled_Statement_Sequence (Decl_Or_Stmt))) then Check_Unnesting_In_Decls_Or_Stmts (Statements (Handled_Statement_Sequence (Decl_Or_Stmt))); Check_Unnesting_In_Handlers (Decl_Or_Stmt); end if; end if; Next (Decl_Or_Stmt); end loop; end if; end Check_Unnesting_In_Decls_Or_Stmts; --------------------------------- -- Check_Unnesting_In_Handlers -- --------------------------------- procedure Check_Unnesting_In_Handlers (N : Node_Id) is Stmt_Seq : constant Node_Id := Handled_Statement_Sequence (N); begin if Present (Stmt_Seq) and then Present (Exception_Handlers (Stmt_Seq)) then declare Handler : Node_Id := First (Exception_Handlers (Stmt_Seq)); begin while Present (Handler) loop if Present (Statements (Handler)) then Check_Unnesting_In_Decls_Or_Stmts (Statements (Handler)); end if; Next (Handler); end loop; end; end if; end Check_Unnesting_In_Handlers; ------------------------------ -- Check_Visibly_Controlled -- ------------------------------ procedure Check_Visibly_Controlled (Prim : Final_Primitives; Typ : Entity_Id; E : in out Entity_Id; Cref : in out Node_Id) is Parent_Type : Entity_Id; Op : Entity_Id; begin if Is_Derived_Type (Typ) and then Comes_From_Source (E) and then No (Overridden_Operation (E)) then -- We know that the explicit operation on the type does not override -- the inherited operation of the parent, and that the derivation -- is from a private type that is not visibly controlled. Parent_Type := Etype (Typ); Op := Find_Optional_Prim_Op (Parent_Type, Name_Of (Prim)); if Present (Op) then E := Op; -- Wrap the object to be initialized into the proper -- unchecked conversion, to be compatible with the operation -- to be called. if Nkind (Cref) = N_Unchecked_Type_Conversion then Cref := Unchecked_Convert_To (Parent_Type, Expression (Cref)); else Cref := Unchecked_Convert_To (Parent_Type, Cref); end if; end if; end if; end Check_Visibly_Controlled; -------------------------- -- Contains_Subprogram -- -------------------------- function Contains_Subprogram (Blk : Entity_Id) return Boolean is E : Entity_Id; begin E := First_Entity (Blk); -- The compiler may generate loops with a declare block containing -- nested procedures used for finalization. Recursively search for -- subprograms in such constructs. if Ekind (Blk) = E_Loop and then Parent_Kind (Blk) = N_Loop_Statement then declare Stmt : Node_Id := First (Statements (Parent (Blk))); begin while Present (Stmt) loop if Nkind (Stmt) = N_Block_Statement then declare Id : constant Entity_Id := Entity (Identifier (Stmt)); begin if Contains_Subprogram (Id) then return True; end if; end; end if; Next (Stmt); end loop; end; end if; while Present (E) loop if Is_Subprogram (E) then return True; elsif Ekind (E) in E_Block | E_Loop and then Contains_Subprogram (E) then return True; end if; Next_Entity (E); end loop; return False; end Contains_Subprogram; ------------------ -- Convert_View -- ------------------ function Convert_View (Proc : Entity_Id; Arg : Node_Id) return Node_Id is Ftyp : constant Entity_Id := Etype (First_Formal (Proc)); Atyp : Entity_Id; begin if Nkind (Arg) in N_Type_Conversion | N_Unchecked_Type_Conversion then Atyp := Entity (Subtype_Mark (Arg)); else Atyp := Etype (Arg); end if; if Is_Abstract_Subprogram (Proc) and then Is_Tagged_Type (Ftyp) then return Unchecked_Convert_To (Class_Wide_Type (Ftyp), Arg); elsif Present (Atyp) and then Atyp /= Ftyp and then (Is_Private_Type (Ftyp) or else Is_Private_Type (Atyp) or else Is_Private_Type (Base_Type (Atyp))) and then Implementation_Base_Type (Atyp) = Implementation_Base_Type (Ftyp) then return Unchecked_Convert_To (Ftyp, Arg); -- If the argument is already a conversion, as generated by -- Make_Init_Call, set the target type to the type of the formal -- directly, to avoid spurious typing problems. elsif Nkind (Arg) in N_Unchecked_Type_Conversion | N_Type_Conversion and then not Is_Class_Wide_Type (Atyp) then Set_Subtype_Mark (Arg, New_Occurrence_Of (Ftyp, Sloc (Arg))); Set_Etype (Arg, Ftyp); return Arg; -- Otherwise, introduce a conversion when the designated object -- has a type derived from the formal of the controlled routine. elsif Is_Private_Type (Ftyp) and then Present (Atyp) and then Is_Derived_Type (Underlying_Type (Base_Type (Atyp))) then return Unchecked_Convert_To (Ftyp, Arg); else return Arg; end if; end Convert_View; ------------------------------- -- Establish_Transient_Scope -- ------------------------------- -- This procedure is called each time a transient block has to be inserted -- that is to say for each call to a function with unconstrained or tagged -- result. It creates a new scope on the scope stack in order to enclose -- all transient variables generated. procedure Establish_Transient_Scope (N : Node_Id; Manage_Sec_Stack : Boolean) is function Is_Package_Or_Subprogram (Id : Entity_Id) return Boolean; -- Determine whether arbitrary Id denotes a package or subprogram [body] function Find_Enclosing_Transient_Scope return Int; -- Examine the scope stack looking for the nearest enclosing transient -- scope within the innermost enclosing package or subprogram. Return -- its index in the table or else -1 if no such scope exists. function Find_Transient_Context (N : Node_Id) return Node_Id; -- Locate a suitable context for arbitrary node N which may need to be -- serviced by a transient scope. Return Empty if no suitable context -- is available. procedure Delegate_Sec_Stack_Management; -- Move the management of the secondary stack to the nearest enclosing -- suitable scope. procedure Create_Transient_Scope (Context : Node_Id); -- Place a new scope on the scope stack in order to service construct -- Context. Context is the node found by Find_Transient_Context. The -- new scope may also manage the secondary stack. ---------------------------- -- Create_Transient_Scope -- ---------------------------- procedure Create_Transient_Scope (Context : Node_Id) is Loc : constant Source_Ptr := Sloc (N); Iter_Loop : Entity_Id; Trans_Scop : constant Entity_Id := New_Internal_Entity (E_Block, Current_Scope, Loc, 'B'); begin Set_Etype (Trans_Scop, Standard_Void_Type); -- Push a new scope, and set its Node_To_Be_Wrapped and Is_Transient -- fields. Push_Scope (Trans_Scop); Scope_Stack.Table (Scope_Stack.Last).Node_To_Be_Wrapped := Context; Scope_Stack.Table (Scope_Stack.Last).Is_Transient := True; -- The transient scope must also manage the secondary stack if Manage_Sec_Stack then Set_Uses_Sec_Stack (Trans_Scop); Check_Restriction (No_Secondary_Stack, N); -- The expansion of iterator loops generates references to objects -- in order to extract elements from a container: -- Ref : Reference_Type_Ptr := Reference (Container, Cursor); -- Obj : renames Ref.all.Element.all; -- These references are controlled and returned on the secondary -- stack. A new reference is created at each iteration of the loop -- and as a result it must be finalized and the space occupied by -- it on the secondary stack reclaimed at the end of the current -- iteration. -- When the context that requires a transient scope is a call to -- routine Reference, the node to be wrapped is the source object: -- for Obj of Container loop -- Routine Wrap_Transient_Declaration however does not generate -- a physical block as wrapping a declaration will kill it too -- early. To handle this peculiar case, mark the related iterator -- loop as requiring the secondary stack. This signals the -- finalization machinery to manage the secondary stack (see -- routine Process_Statements_For_Controlled_Objects). Iter_Loop := Find_Enclosing_Iterator_Loop (Trans_Scop); if Present (Iter_Loop) then Set_Uses_Sec_Stack (Iter_Loop); end if; end if; if Debug_Flag_W then Write_Str (" "); Write_Eol; end if; end Create_Transient_Scope; ----------------------------------- -- Delegate_Sec_Stack_Management -- ----------------------------------- procedure Delegate_Sec_Stack_Management is begin for Index in reverse Scope_Stack.First .. Scope_Stack.Last loop declare Scope : Scope_Stack_Entry renames Scope_Stack.Table (Index); begin -- Prevent the search from going too far or within the scope -- space of another unit. if Scope.Entity = Standard_Standard then return; -- No transient scope should be encountered during the -- traversal because Establish_Transient_Scope should have -- already handled this case. elsif Scope.Is_Transient then raise Program_Error; -- The construct that requires secondary stack management is -- always enclosed by a package or subprogram scope. elsif Is_Package_Or_Subprogram (Scope.Entity) then Set_Uses_Sec_Stack (Scope.Entity); Check_Restriction (No_Secondary_Stack, N); return; end if; end; end loop; -- At this point no suitable scope was found. This should never occur -- because a construct is always enclosed by a compilation unit which -- has a scope. pragma Assert (False); end Delegate_Sec_Stack_Management; ------------------------------------ -- Find_Enclosing_Transient_Scope -- ------------------------------------ function Find_Enclosing_Transient_Scope return Int is begin for Index in reverse Scope_Stack.First .. Scope_Stack.Last loop declare Scope : Scope_Stack_Entry renames Scope_Stack.Table (Index); begin -- Prevent the search from going too far or within the scope -- space of another unit. if Scope.Entity = Standard_Standard or else Is_Package_Or_Subprogram (Scope.Entity) then exit; elsif Scope.Is_Transient then return Index; end if; end; end loop; return -1; end Find_Enclosing_Transient_Scope; ---------------------------- -- Find_Transient_Context -- ---------------------------- function Find_Transient_Context (N : Node_Id) return Node_Id is Curr : Node_Id := N; Prev : Node_Id := Empty; begin while Present (Curr) loop case Nkind (Curr) is -- Declarations -- Declarations act as a boundary for a transient scope even if -- they are not wrapped, see Wrap_Transient_Declaration. when N_Object_Declaration | N_Object_Renaming_Declaration | N_Subtype_Declaration => return Curr; -- Statements -- Statements and statement-like constructs act as a boundary -- for a transient scope. when N_Accept_Alternative | N_Attribute_Definition_Clause | N_Case_Statement | N_Case_Statement_Alternative | N_Code_Statement | N_Delay_Alternative | N_Delay_Until_Statement | N_Delay_Relative_Statement | N_Discriminant_Association | N_Elsif_Part | N_Entry_Body_Formal_Part | N_Exit_Statement | N_If_Statement | N_Iteration_Scheme | N_Terminate_Alternative => pragma Assert (Present (Prev)); return Prev; when N_Assignment_Statement => return Curr; when N_Entry_Call_Statement | N_Procedure_Call_Statement => -- When an entry or procedure call acts as the alternative -- of a conditional or timed entry call, the proper context -- is that of the alternative. if Nkind (Parent (Curr)) = N_Entry_Call_Alternative and then Nkind (Parent (Parent (Curr))) in N_Conditional_Entry_Call | N_Timed_Entry_Call then return Parent (Parent (Curr)); -- General case for entry or procedure calls else return Curr; end if; when N_Pragma => -- Pragma Check is not a valid transient context in -- GNATprove mode because the pragma must remain unchanged. if GNATprove_Mode and then Get_Pragma_Id (Curr) = Pragma_Check then return Empty; -- General case for pragmas else return Curr; end if; when N_Raise_Statement => return Curr; when N_Simple_Return_Statement => declare Fun_Id : constant Entity_Id := Return_Applies_To (Return_Statement_Entity (Curr)); begin -- A transient context that must manage the secondary -- stack cannot be a return statement of a function that -- itself requires secondary stack management, because -- the function's result would be reclaimed too early. -- And returns of thunks never require transient scopes. if (Manage_Sec_Stack and then Needs_Secondary_Stack (Etype (Fun_Id))) or else Is_Thunk (Fun_Id) then return Empty; -- General case for return statements else return Curr; end if; end; -- Special when N_Attribute_Reference => if Is_Procedure_Attribute_Name (Attribute_Name (Curr)) then return Curr; end if; -- An Ada 2012 iterator specification is not a valid context -- because Analyze_Iterator_Specification already employs -- special processing for it. when N_Iterator_Specification => return Empty; when N_Loop_Parameter_Specification => -- An iteration scheme is not a valid context because -- routine Analyze_Iteration_Scheme already employs -- special processing. if Nkind (Parent (Curr)) = N_Iteration_Scheme then return Empty; else return Parent (Curr); end if; -- Termination -- The following nodes represent "dummy contexts" which do not -- need to be wrapped. when N_Component_Declaration | N_Discriminant_Specification | N_Parameter_Specification => return Empty; -- If the traversal leaves a scope without having been able to -- find a construct to wrap, something is going wrong, but this -- can happen in error situations that are not detected yet -- (such as a dynamic string in a pragma Export). when N_Block_Statement | N_Entry_Body | N_Package_Body | N_Package_Declaration | N_Protected_Body | N_Subprogram_Body | N_Task_Body => return Empty; -- Default when others => null; end case; Prev := Curr; Curr := Parent (Curr); end loop; return Empty; end Find_Transient_Context; ------------------------------ -- Is_Package_Or_Subprogram -- ------------------------------ function Is_Package_Or_Subprogram (Id : Entity_Id) return Boolean is begin return Ekind (Id) in E_Entry | E_Entry_Family | E_Function | E_Package | E_Procedure | E_Subprogram_Body; end Is_Package_Or_Subprogram; -- Local variables Trans_Idx : constant Int := Find_Enclosing_Transient_Scope; Context : Node_Id; -- Start of processing for Establish_Transient_Scope begin -- Do not create a new transient scope if there is already an enclosing -- transient scope within the innermost enclosing package or subprogram. if Trans_Idx >= 0 then -- If the transient scope was requested for purposes of managing the -- secondary stack, then the existing scope must perform this task, -- unless the node to be wrapped is a return statement of a function -- that requires secondary stack management, because the function's -- result would be reclaimed too early (see Find_Transient_Context). if Manage_Sec_Stack then declare SE : Scope_Stack_Entry renames Scope_Stack.Table (Trans_Idx); begin if Nkind (SE.Node_To_Be_Wrapped) /= N_Simple_Return_Statement or else not Needs_Secondary_Stack (Etype (Return_Applies_To (Return_Statement_Entity (SE.Node_To_Be_Wrapped)))) then Set_Uses_Sec_Stack (SE.Entity); end if; end; end if; return; end if; -- Find the construct that must be serviced by a new transient scope, if -- it exists. Context := Find_Transient_Context (N); if Present (Context) then if Nkind (Context) = N_Assignment_Statement then -- An assignment statement with suppressed controlled semantics -- does not need a transient scope because finalization is not -- desirable at this point. Note that No_Ctrl_Actions is also -- set for non-controlled assignments to suppress dispatching -- _assign. if No_Ctrl_Actions (Context) and then Needs_Finalization (Etype (Name (Context))) then -- When a controlled component is initialized by a function -- call, the result on the secondary stack is always assigned -- to the component. Signal the nearest suitable scope that it -- is safe to manage the secondary stack. if Manage_Sec_Stack and then Within_Init_Proc then Delegate_Sec_Stack_Management; end if; -- Otherwise the assignment is a normal transient context and thus -- requires a transient scope. else Create_Transient_Scope (Context); end if; -- General case else Create_Transient_Scope (Context); end if; end if; end Establish_Transient_Scope; ---------------------------- -- Expand_Cleanup_Actions -- ---------------------------- procedure Expand_Cleanup_Actions (N : Node_Id) is pragma Assert (Nkind (N) in N_Block_Statement | N_Subprogram_Body | N_Task_Body | N_Entry_Body | N_Extended_Return_Statement); Scop : constant Entity_Id := Current_Scope; Is_Asynchronous_Call : constant Boolean := Nkind (N) = N_Block_Statement and then Is_Asynchronous_Call_Block (N); Is_Master : constant Boolean := Nkind (N) /= N_Extended_Return_Statement and then Nkind (N) /= N_Entry_Body and then Is_Task_Master (N); Is_Protected_Subp_Body : constant Boolean := Nkind (N) = N_Subprogram_Body and then Is_Protected_Subprogram_Body (N); Is_Task_Allocation : constant Boolean := Nkind (N) = N_Block_Statement and then Is_Task_Allocation_Block (N); Is_Task_Body : constant Boolean := Nkind (Original_Node (N)) = N_Task_Body; -- We mark the secondary stack if it is used in this construct, and -- we're not returning a function result on the secondary stack, except -- that a build-in-place function that might or might not return on the -- secondary stack always needs a mark. A run-time test is required in -- the case where the build-in-place function has a BIP_Alloc extra -- parameter (see Create_Finalizer). Needs_Sec_Stack_Mark : constant Boolean := (Uses_Sec_Stack (Scop) and then not Sec_Stack_Needed_For_Return (Scop)) or else (Is_Build_In_Place_Function (Scop) and then Needs_BIP_Alloc_Form (Scop)); Needs_Custom_Cleanup : constant Boolean := Nkind (N) = N_Block_Statement and then Present (Cleanup_Actions (N)); Actions_Required : constant Boolean := Requires_Cleanup_Actions (N, True) or else Is_Asynchronous_Call or else Is_Master or else Is_Protected_Subp_Body or else Is_Task_Allocation or else Is_Task_Body or else Needs_Sec_Stack_Mark or else Needs_Custom_Cleanup; Loc : Source_Ptr; Cln : List_Id; -- Start of processing for Expand_Cleanup_Actions begin -- The current construct does not need any form of servicing if not Actions_Required then return; end if; -- If an extended return statement contains something like -- -- X := F (...); -- -- where F is a build-in-place function call returning a controlled -- type, then a temporary object will be implicitly declared as part -- of the statement list, and this will need cleanup. In such cases, -- we transform: -- -- return Result : T := ... do -- -- possibly with handlers -- end return; -- -- into: -- -- return Result : T := ... do -- declare -- no declarations -- begin -- -- possibly with handlers -- end; -- no handlers -- end return; -- -- So Expand_Cleanup_Actions will end up being called recursively on the -- block statement. if Nkind (N) = N_Extended_Return_Statement then declare Block : constant Node_Id := Make_Block_Statement (Sloc (N), Declarations => Empty_List, Handled_Statement_Sequence => Handled_Statement_Sequence (N)); begin Set_Handled_Statement_Sequence (N, Make_Handled_Sequence_Of_Statements (Sloc (N), Statements => New_List (Block))); Analyze (Block); end; -- Analysis of the block did all the work return; end if; if Needs_Custom_Cleanup then Cln := Cleanup_Actions (N); else Cln := No_List; end if; if No (Declarations (N)) then Set_Declarations (N, New_List); end if; declare Decls : constant List_Id := Declarations (N); Fin_Id : Entity_Id; Mark : Entity_Id := Empty; begin -- If we are generating expanded code for debugging purposes, use the -- Sloc of the point of insertion for the cleanup code. The Sloc will -- be updated subsequently to reference the proper line in .dg files. -- If we are not debugging generated code, use No_Location instead, -- so that no debug information is generated for the cleanup code. -- This makes the behavior of the NEXT command in GDB monotonic, and -- makes the placement of breakpoints more accurate. if Debug_Generated_Code then Loc := Sloc (Scop); else Loc := No_Location; end if; -- A task activation call has already been built for a task -- allocation block. if not Is_Task_Allocation then Build_Task_Activation_Call (N); end if; if Is_Master then Establish_Task_Master (N); end if; -- If secondary stack is in use, generate: -- -- Mnn : constant Mark_Id := SS_Mark; if Needs_Sec_Stack_Mark then Set_Uses_Sec_Stack (Scop, False); -- avoid duplicate SS marks Mark := Make_Temporary (Loc, 'M'); declare Mark_Call : constant Node_Id := Build_SS_Mark_Call (Loc, Mark); begin Prepend_To (Decls, Mark_Call); Analyze (Mark_Call); end; end if; -- Generate finalization calls for all controlled objects appearing -- in the statements of N. Add context specific cleanup for various -- constructs. Build_Finalizer (N => N, Clean_Stmts => Build_Cleanup_Statements (N, Cln), Mark_Id => Mark, Top_Decls => Decls, Defer_Abort => Nkind (Original_Node (N)) = N_Task_Body or else Is_Master, Fin_Id => Fin_Id); if Present (Fin_Id) then Build_Finalizer_Call (N, Fin_Id); end if; end; end Expand_Cleanup_Actions; --------------------------- -- Expand_N_Package_Body -- --------------------------- -- Add call to Activate_Tasks if body is an activator (actual processing -- is in chapter 9). -- Generate subprogram descriptor for elaboration routine -- Encode entity names in package body procedure Expand_N_Package_Body (N : Node_Id) is Id : constant Entity_Id := Defining_Entity (N); Spec_Id : constant Entity_Id := Corresponding_Spec (N); Fin_Id : Entity_Id; begin -- This is done only for non-generic packages if Ekind (Spec_Id) = E_Package then -- Build dispatch tables of library-level tagged types for bodies -- that are not compilation units (see Analyze_Compilation_Unit), -- except for instances because they have no N_Compilation_Unit. if Tagged_Type_Expansion and then Is_Library_Level_Entity (Spec_Id) and then (not Is_Compilation_Unit (Spec_Id) or else Is_Generic_Instance (Spec_Id)) then Build_Static_Dispatch_Tables (N); end if; Push_Scope (Spec_Id); Expand_CUDA_Package (N); Build_Task_Activation_Call (N); -- Verify the run-time semantics of pragma Initial_Condition at the -- end of the body statements. Expand_Pragma_Initial_Condition (Spec_Id, N); -- If this is a library-level package and unnesting is enabled, -- check for the presence of blocks with nested subprograms occurring -- in elaboration code, and generate procedures to encapsulate the -- blocks in case the nested subprograms make up-level references. if Unnest_Subprogram_Mode and then Is_Library_Level_Entity (Current_Scope) then Check_Unnesting_Elaboration_Code (N); Check_Unnesting_In_Decls_Or_Stmts (Declarations (N)); Check_Unnesting_In_Handlers (N); end if; Pop_Scope; end if; Set_Elaboration_Flag (N, Spec_Id); Set_In_Package_Body (Spec_Id, False); -- Set to encode entity names in package body before gigi is called Qualify_Entity_Names (N); if Ekind (Spec_Id) /= E_Generic_Package and then not Delay_Cleanups (Id) then Build_Finalizer (N => N, Clean_Stmts => No_List, Mark_Id => Empty, Top_Decls => No_List, Defer_Abort => False, Fin_Id => Fin_Id); if Present (Fin_Id) then Set_Finalizer (Defining_Entity (N), Fin_Id); end if; end if; end Expand_N_Package_Body; ---------------------------------- -- Expand_N_Package_Declaration -- ---------------------------------- -- Add call to Activate_Tasks if there are tasks declared and the package -- has no body. Note that in Ada 83 this may result in premature activation -- of some tasks, given that we cannot tell whether a body will eventually -- appear. procedure Expand_N_Package_Declaration (N : Node_Id) is Id : constant Entity_Id := Defining_Entity (N); Spec : constant Node_Id := Specification (N); Decls : List_Id; Fin_Id : Entity_Id; No_Body : Boolean := False; -- True in the case of a package declaration that is a compilation -- unit and for which no associated body will be compiled in this -- compilation. begin -- Case of a package declaration other than a compilation unit if Nkind (Parent (N)) /= N_Compilation_Unit then null; -- Case of a compilation unit that does not require a body elsif not Body_Required (Parent (N)) and then not Unit_Requires_Body (Id) then No_Body := True; -- Special case of generating calling stubs for a remote call interface -- package: even though the package declaration requires one, the body -- won't be processed in this compilation (so any stubs for RACWs -- declared in the package must be generated here, along with the spec). elsif Parent (N) = Cunit (Main_Unit) and then Is_Remote_Call_Interface (Id) and then Distribution_Stub_Mode = Generate_Caller_Stub_Body then No_Body := True; end if; -- For a nested instance, delay processing until freeze point if Has_Delayed_Freeze (Id) and then Nkind (Parent (N)) /= N_Compilation_Unit then return; end if; -- For a package declaration that implies no associated body, generate -- task activation call and RACW supporting bodies now (since we won't -- have a specific separate compilation unit for that). if No_Body then Push_Scope (Id); -- Generate RACW subprogram bodies if Has_RACW (Id) then Decls := Private_Declarations (Spec); if No (Decls) then Decls := Visible_Declarations (Spec); end if; if No (Decls) then Decls := New_List; Set_Visible_Declarations (Spec, Decls); end if; Append_RACW_Bodies (Decls, Id); Analyze_List (Decls); end if; -- Generate task activation call as last step of elaboration if Present (Activation_Chain_Entity (N)) then Build_Task_Activation_Call (N); end if; -- Verify the run-time semantics of pragma Initial_Condition at the -- end of the private declarations when the package lacks a body. Expand_Pragma_Initial_Condition (Id, N); Pop_Scope; end if; -- Build dispatch tables of library-level tagged types for instances -- that are not compilation units (see Analyze_Compilation_Unit). if Tagged_Type_Expansion and then Is_Library_Level_Entity (Id) and then Is_Generic_Instance (Id) and then not Is_Compilation_Unit (Id) then Build_Static_Dispatch_Tables (N); end if; -- Note: it is not necessary to worry about generating a subprogram -- descriptor, since the only way to get exception handlers into a -- package spec is to include instantiations, and that would cause -- generation of subprogram descriptors to be delayed in any case. -- Set to encode entity names in package spec before gigi is called Qualify_Entity_Names (N); if Ekind (Id) /= E_Generic_Package and then not Delay_Cleanups (Id) then Build_Finalizer (N => N, Clean_Stmts => No_List, Mark_Id => Empty, Top_Decls => No_List, Defer_Abort => False, Fin_Id => Fin_Id); if Present (Fin_Id) then Set_Finalizer (Id, Fin_Id); end if; end if; -- If this is a library-level package and unnesting is enabled, -- check for the presence of blocks with nested subprograms occurring -- in elaboration code, and generate procedures to encapsulate the -- blocks in case the nested subprograms make up-level references. if Unnest_Subprogram_Mode and then Is_Library_Level_Entity (Current_Scope) then Check_Unnesting_In_Decls_Or_Stmts (Visible_Declarations (Spec)); Check_Unnesting_In_Decls_Or_Stmts (Private_Declarations (Spec)); end if; end Expand_N_Package_Declaration; --------------------------------- -- Has_Simple_Protected_Object -- --------------------------------- function Has_Simple_Protected_Object (T : Entity_Id) return Boolean is begin if Has_Task (T) then return False; elsif Is_Simple_Protected_Type (T) then return True; elsif Is_Array_Type (T) then return Has_Simple_Protected_Object (Component_Type (T)); elsif Is_Record_Type (T) then declare Comp : Entity_Id; begin Comp := First_Component (T); while Present (Comp) loop if Has_Simple_Protected_Object (Etype (Comp)) then return True; end if; Next_Component (Comp); end loop; return False; end; else return False; end if; end Has_Simple_Protected_Object; ------------------------------------ -- Insert_Actions_In_Scope_Around -- ------------------------------------ procedure Insert_Actions_In_Scope_Around (N : Node_Id; Clean : Boolean; Manage_SS : Boolean) is Act_Before : constant List_Id := Scope_Stack.Table (Scope_Stack.Last).Actions_To_Be_Wrapped (Before); Act_After : constant List_Id := Scope_Stack.Table (Scope_Stack.Last).Actions_To_Be_Wrapped (After); Act_Cleanup : constant List_Id := Scope_Stack.Table (Scope_Stack.Last).Actions_To_Be_Wrapped (Cleanup); -- Note: We used to use renamings of Scope_Stack.Table (Scope_Stack. -- Last), but this was incorrect as Process_Transients_In_Scope may -- introduce new scopes and cause a reallocation of Scope_Stack.Table. procedure Process_Transients_In_Scope (First_Object : Node_Id; Last_Object : Node_Id; Related_Node : Node_Id); -- Find all transient objects in the list First_Object .. Last_Object -- and generate finalization actions for them. Related_Node denotes the -- node which created all transient objects. --------------------------------- -- Process_Transients_In_Scope -- --------------------------------- procedure Process_Transients_In_Scope (First_Object : Node_Id; Last_Object : Node_Id; Related_Node : Node_Id) is function Is_Subprogram_Call (N : Node_Id) return Traverse_Result; -- Return Abandon if arbitrary node denotes a subprogram call function Has_Subprogram_Call is new Traverse_Func (Is_Subprogram_Call); procedure Process_Transient_In_Scope (Obj_Decl : Node_Id; Insert_Nod : Node_Id; Must_Export : Boolean); -- Generate finalization actions for a single transient object -- denoted by object declaration Obj_Decl. ------------------------ -- Is_Subprogram_Call -- ------------------------ function Is_Subprogram_Call (N : Node_Id) return Traverse_Result is begin -- A regular procedure or function call if Nkind (N) in N_Subprogram_Call then return Abandon; -- Special cases -- Heavy expansion may relocate function calls outside the related -- node. Inspect the original node to detect the initial placement -- of the call. elsif Is_Rewrite_Substitution (N) then return Has_Subprogram_Call (Original_Node (N)); -- Generalized indexing always involves a function call elsif Nkind (N) = N_Indexed_Component and then Present (Generalized_Indexing (N)) then return Abandon; -- Keep searching else return OK; end if; end Is_Subprogram_Call; -------------------------------- -- Process_Transient_In_Scope -- -------------------------------- procedure Process_Transient_In_Scope (Obj_Decl : Node_Id; Insert_Nod : Node_Id; Must_Export : Boolean) is Loc : constant Source_Ptr := Sloc (Obj_Decl); Obj_Id : constant Entity_Id := Defining_Entity (Obj_Decl); Master_Node_Id : Entity_Id; Master_Node_Decl : Node_Id; Obj_Ref : Node_Id; Obj_Typ : Entity_Id; begin -- If the object needs to be exported to the outer finalizer, -- create the declaration of the Master_Node for the object, -- which will later be picked up by Build_Finalizer. if Must_Export then Master_Node_Id := Make_Temporary (Loc, 'N'); Master_Node_Decl := Make_Master_Node_Declaration (Loc, Master_Node_Id, Obj_Id); Insert_Before_And_Analyze (Obj_Decl, Master_Node_Decl); -- Generate the attachment of the object to the Master_Node Attach_Object_To_Master_Node (Obj_Decl, Master_Node_Id); -- Then add the finalization call for the object Insert_After_And_Analyze (Insert_Nod, Make_Procedure_Call_Statement (Loc, Name => New_Occurrence_Of (RTE (RE_Finalize_Object), Loc), Parameter_Associations => New_List ( New_Occurrence_Of (Master_Node_Id, Loc)))); -- Otherwise generate a direct finalization call for the object else -- Handle the object type and the reference to the object Obj_Ref := New_Occurrence_Of (Obj_Id, Loc); Obj_Typ := Base_Type (Etype (Obj_Id)); if Is_Access_Type (Obj_Typ) then Obj_Ref := Make_Explicit_Dereference (Loc, Obj_Ref); Obj_Typ := Available_View (Designated_Type (Obj_Typ)); end if; Insert_After_And_Analyze (Insert_Nod, Make_Final_Call (Obj_Ref => Obj_Ref, Typ => Obj_Typ)); end if; -- Mark the transient object to avoid double finalization Set_Is_Finalized_Transient (Obj_Id); end Process_Transient_In_Scope; -- Local variables Insert_Nod : Node_Id; -- Insertion node for the finalization actions Must_Export : Boolean; -- Flag denoting whether the context requires transient object -- export to the outer finalizer. Obj_Decl : Node_Id; -- Start of processing for Process_Transients_In_Scope begin -- The expansion performed by this routine is as follows: -- Ctrl_Trans_Obj_1MN : Master_Node; -- Ctrl_Trans_Obj_1 : ...; -- . . . -- Ctrl_Trans_Obj_NMN : Master_Node; -- Ctrl_Trans_Obj_N : ...; -- Finalize_Object (Ctrl_Trans_Obj_NMN); -- . . . -- Finalize_Object (Ctrl_Trans_Obj_1MN); -- Recognize a scenario where the transient context is an object -- declaration initialized by a build-in-place function call: -- Obj : ... := BIP_Function_Call (Ctrl_Func_Call); -- The rough expansion of the above is: -- Temp : ... := Ctrl_Func_Call; -- Obj : ...; -- Res : ... := BIP_Func_Call (..., Obj, ...); -- The finalization of any transient object must happen after the -- build-in-place function call is executed. if Nkind (N) = N_Object_Declaration and then Present (BIP_Initialization_Call (Defining_Identifier (N))) then Must_Export := True; Insert_Nod := BIP_Initialization_Call (Defining_Identifier (N)); -- Search the context for at least one subprogram call. If found, the -- machinery exports all transient objects to the enclosing finalizer -- due to the possibility of abnormal call termination. else Must_Export := Has_Subprogram_Call (N) = Abandon; Insert_Nod := Last_Object; end if; Insert_List_After_And_Analyze (Insert_Nod, Act_Cleanup); -- Examine all the objects in the list First_Object .. Last_Object -- but skip the node to be wrapped because it is not transient as -- far as this scope is concerned. Obj_Decl := First_Object; while Present (Obj_Decl) loop if Obj_Decl /= Related_Node and then Nkind (Obj_Decl) = N_Object_Declaration and then Analyzed (Obj_Decl) and then Is_Finalizable_Transient (Obj_Decl, N) then Process_Transient_In_Scope (Obj_Decl, Insert_Nod, Must_Export); end if; exit when Obj_Decl = Last_Object; Next (Obj_Decl); end loop; end Process_Transients_In_Scope; -- Local variables Loc : constant Source_Ptr := Sloc (N); Node_To_Wrap : constant Node_Id := Node_To_Be_Wrapped; First_Obj : Node_Id; Last_Obj : Node_Id; Mark_Id : Entity_Id; Target : Node_Id; -- Start of processing for Insert_Actions_In_Scope_Around begin -- Nothing to do if the scope does not manage the secondary stack or -- does not contain meaningful actions for insertion. if not Manage_SS and then No (Act_Before) and then No (Act_After) and then No (Act_Cleanup) then return; end if; -- If the node to be wrapped is the trigger of an asynchronous select, -- it is not part of a statement list. The actions must be inserted -- before the select itself, which is part of some list of statements. -- Note that the triggering alternative includes the triggering -- statement and an optional statement list. If the node to be -- wrapped is part of that list, the normal insertion applies. if Nkind (Parent (Node_To_Wrap)) = N_Triggering_Alternative and then not Is_List_Member (Node_To_Wrap) then Target := Parent (Parent (Node_To_Wrap)); else Target := N; end if; First_Obj := Target; Last_Obj := Target; -- Add all actions associated with a transient scope into the main tree. -- There are several scenarios here: -- +--- Before ----+ +----- After ---+ -- 1) First_Obj ....... Target ........ Last_Obj -- 2) First_Obj ....... Target -- 3) Target ........ Last_Obj -- Flag declarations are inserted before the first object if Present (Act_Before) then First_Obj := First (Act_Before); Insert_List_Before (Target, Act_Before); end if; -- Finalization calls are inserted after the last object if Present (Act_After) then Last_Obj := Last (Act_After); Insert_List_After (Target, Act_After); end if; -- Mark and release the secondary stack when the context warrants it if Manage_SS then Mark_Id := Make_Temporary (Loc, 'M'); -- Generate: -- Mnn : constant Mark_Id := SS_Mark; Insert_Before_And_Analyze (First_Obj, Build_SS_Mark_Call (Loc, Mark_Id)); -- Generate: -- SS_Release (Mnn); Insert_After_And_Analyze (Last_Obj, Build_SS_Release_Call (Loc, Mark_Id)); end if; -- If we are handling cleanups, check for transient objects associated -- with Target and generate the required finalization actions for them. if Clean then Process_Transients_In_Scope (First_Object => First_Obj, Last_Object => Last_Obj, Related_Node => Target); end if; -- Reset the action lists Scope_Stack.Table (Scope_Stack.Last).Actions_To_Be_Wrapped (Before) := No_List; Scope_Stack.Table (Scope_Stack.Last).Actions_To_Be_Wrapped (After) := No_List; if Clean then Scope_Stack.Table (Scope_Stack.Last).Actions_To_Be_Wrapped (Cleanup) := No_List; end if; end Insert_Actions_In_Scope_Around; ------------------------------ -- Is_Simple_Protected_Type -- ------------------------------ function Is_Simple_Protected_Type (T : Entity_Id) return Boolean is begin return Is_Protected_Type (T) and then not Uses_Lock_Free (T) and then not Has_Entries (T) and then Is_RTE (Find_Protection_Type (T), RE_Protection); end Is_Simple_Protected_Type; ------------------------------- -- Make_Address_For_Finalize -- ------------------------------- function Make_Address_For_Finalize (Loc : Source_Ptr; Obj_Ref : Node_Id; Obj_Typ : Entity_Id) return Node_Id is Obj_Addr : Node_Id; begin Obj_Addr := Make_Attribute_Reference (Loc, Prefix => Obj_Ref, Attribute_Name => Name_Address); -- If the type of a constrained array has an unconstrained first -- subtype, its Finalize_Address primitive expects the address of -- an object with a dope vector (see Make_Finalize_Address_Stmts). -- This is achieved by setting Is_Constr_Array_Subt_With_Bounds, -- but the address of the object is still that of its elements, -- so we need to shift it. if Is_Array_Type (Obj_Typ) and then not Is_Constrained (First_Subtype (Obj_Typ)) then -- Shift the address from the start of the elements to the -- start of the dope vector: -- V - (Obj_Typ'Descriptor_Size / Storage_Unit) -- Note that this is done through a wrapper routine as RTSfind -- cannot retrieve operations with string name of the form "+". Obj_Addr := Make_Function_Call (Loc, Name => New_Occurrence_Of (RTE (RE_Add_Offset_To_Address), Loc), Parameter_Associations => New_List ( Obj_Addr, Make_Op_Minus (Loc, Make_Op_Divide (Loc, Left_Opnd => Make_Attribute_Reference (Loc, Prefix => New_Occurrence_Of (Obj_Typ, Loc), Attribute_Name => Name_Descriptor_Size), Right_Opnd => Make_Integer_Literal (Loc, System_Storage_Unit))))); end if; return Obj_Addr; end Make_Address_For_Finalize; ----------------------- -- Make_Adjust_Call -- ----------------------- function Make_Adjust_Call (Obj_Ref : Node_Id; Typ : Entity_Id; Skip_Self : Boolean := False) return Node_Id is Loc : constant Source_Ptr := Sloc (Obj_Ref); Adj_Id : Entity_Id := Empty; Ref : Node_Id; Utyp : Entity_Id; begin Ref := Obj_Ref; -- Recover the proper type which contains Deep_Adjust if Is_Class_Wide_Type (Typ) then Utyp := Root_Type (Typ); else Utyp := Typ; end if; Utyp := Underlying_Type (Base_Type (Utyp)); Set_Assignment_OK (Ref); -- Deal with untagged derivation of private views if Present (Utyp) and then Is_Untagged_Derivation (Typ) then Utyp := Underlying_Type (Root_Type (Base_Type (Typ))); Ref := Unchecked_Convert_To (Utyp, Ref); Set_Assignment_OK (Ref); end if; -- When dealing with the completion of a private type, use the base -- type instead. if Present (Utyp) and then Utyp /= Base_Type (Utyp) then pragma Assert (Is_Private_Type (Typ)); Utyp := Base_Type (Utyp); Ref := Unchecked_Convert_To (Utyp, Ref); end if; -- The underlying type may not be present due to a missing full view. In -- this case freezing did not take place and there is no [Deep_]Adjust -- primitive to call. if No (Utyp) then return Empty; elsif Skip_Self then if Has_Controlled_Component (Utyp) then if Is_Tagged_Type (Utyp) then Adj_Id := Find_Optional_Prim_Op (Utyp, TSS_Deep_Adjust); else Adj_Id := TSS (Utyp, TSS_Deep_Adjust); end if; end if; -- Class-wide types, interfaces and types with controlled components elsif Is_Class_Wide_Type (Typ) or else Is_Interface (Typ) or else Has_Controlled_Component (Utyp) then if Is_Tagged_Type (Utyp) then Adj_Id := Find_Optional_Prim_Op (Utyp, TSS_Deep_Adjust); else Adj_Id := TSS (Utyp, TSS_Deep_Adjust); end if; -- Derivations from [Limited_]Controlled elsif Is_Controlled (Utyp) then Adj_Id := Find_Optional_Prim_Op (Utyp, Name_Of (Adjust_Case)); -- Tagged types elsif Is_Tagged_Type (Utyp) then Adj_Id := Find_Optional_Prim_Op (Utyp, TSS_Deep_Adjust); else raise Program_Error; end if; if Present (Adj_Id) then -- If the object is unanalyzed, set its expected type for use in -- Convert_View in case an additional conversion is needed. if No (Etype (Ref)) and then Nkind (Ref) /= N_Unchecked_Type_Conversion then Set_Etype (Ref, Typ); end if; -- The object reference may need another conversion depending on the -- type of the formal and that of the actual. if not Is_Class_Wide_Type (Typ) then Ref := Convert_View (Adj_Id, Ref); end if; return Make_Call (Loc, Proc_Id => Adj_Id, Param => Ref, Skip_Self => Skip_Self); else return Empty; end if; end Make_Adjust_Call; --------------- -- Make_Call -- --------------- function Make_Call (Loc : Source_Ptr; Proc_Id : Entity_Id; Param : Node_Id; Skip_Self : Boolean := False) return Node_Id is Params : constant List_Id := New_List (Param); begin -- Do not apply the controlled action to the object itself by signaling -- the related routine to avoid self. if Skip_Self then Append_To (Params, New_Occurrence_Of (Standard_False, Loc)); end if; return Make_Procedure_Call_Statement (Loc, Name => New_Occurrence_Of (Proc_Id, Loc), Parameter_Associations => Params); end Make_Call; -------------------------- -- Make_Deep_Array_Body -- -------------------------- function Make_Deep_Array_Body (Prim : Final_Primitives; Typ : Entity_Id) return List_Id is function Build_Adjust_Or_Finalize_Statements (Typ : Entity_Id) return List_Id; -- Create the statements necessary to adjust or finalize an array of -- controlled elements. Generate: -- -- declare -- Abort : constant Boolean := Triggered_By_Abort; -- -- Abort : constant Boolean := False; -- no abort -- -- E : Exception_Occurrence; -- Raised : Boolean := False; -- -- begin -- for J1 in [reverse] Typ'First (1) .. Typ'Last (1) loop -- ^-- in the finalization case -- ... -- for Jn in [reverse] Typ'First (n) .. Typ'Last (n) loop -- begin -- [Deep_]Adjust / Finalize (V (J1, ..., Jn)); -- -- exception -- when others => -- if not Raised then -- Raised := True; -- Save_Occurrence (E, Get_Current_Excep.all.all); -- end if; -- end; -- end loop; -- ... -- end loop; -- -- if Raised and then not Abort then -- Raise_From_Controlled_Operation (E); -- end if; -- end; function Build_Initialize_Statements (Typ : Entity_Id) return List_Id; -- Create the statements necessary to initialize an array of controlled -- elements. Include a mechanism to carry out partial finalization if an -- exception occurs. Generate: -- -- declare -- Counter : Integer := 0; -- -- begin -- for J1 in V'Range (1) loop -- ... -- for JN in V'Range (N) loop -- begin -- [Deep_]Initialize (V (J1, ..., JN)); -- -- Counter := Counter + 1; -- -- exception -- when others => -- declare -- Abort : constant Boolean := Triggered_By_Abort; -- -- Abort : constant Boolean := False; -- no abort -- E : Exception_Occurrence; -- Raised : Boolean := False; -- begin -- Counter := -- V'Length (1) * -- V'Length (2) * -- ... -- V'Length (N) - Counter; -- for F1 in reverse V'Range (1) loop -- ... -- for FN in reverse V'Range (N) loop -- if Counter > 0 then -- Counter := Counter - 1; -- else -- begin -- [Deep_]Finalize (V (F1, ..., FN)); -- exception -- when others => -- if not Raised then -- Raised := True; -- Save_Occurrence (E, -- Get_Current_Excep.all.all); -- end if; -- end; -- end if; -- end loop; -- ... -- end loop; -- end; -- -- if Raised and then not Abort then -- Raise_From_Controlled_Operation (E); -- end if; -- -- raise; -- end; -- end loop; -- end loop; -- end; function New_References_To (L : List_Id; Loc : Source_Ptr) return List_Id; -- Given a list of defining identifiers, return a list of references to -- the original identifiers, in the same order as they appear. ----------------------------------------- -- Build_Adjust_Or_Finalize_Statements -- ----------------------------------------- function Build_Adjust_Or_Finalize_Statements (Typ : Entity_Id) return List_Id is Comp_Typ : constant Entity_Id := Component_Type (Typ); Index_List : constant List_Id := New_List; Loc : constant Source_Ptr := Sloc (Typ); Num_Dims : constant Int := Number_Dimensions (Typ); procedure Build_Indexes; -- Generate the indexes used in the dimension loops ------------------- -- Build_Indexes -- ------------------- procedure Build_Indexes is begin -- Generate the following identifiers: -- Jnn - for initialization for Dim in 1 .. Num_Dims loop Append_To (Index_List, Make_Defining_Identifier (Loc, New_External_Name ('J', Dim))); end loop; end Build_Indexes; -- Local variables Final_Decls : List_Id := No_List; Final_Data : Finalization_Exception_Data; Block : Node_Id; Call : Node_Id; Comp_Ref : Node_Id; Core_Loop : Node_Id; Dim : Int; J : Entity_Id; Loop_Id : Entity_Id; Stmts : List_Id; -- Start of processing for Build_Adjust_Or_Finalize_Statements begin Final_Decls := New_List; Build_Indexes; Build_Object_Declarations (Final_Data, Final_Decls, Loc); Comp_Ref := Make_Indexed_Component (Loc, Prefix => Make_Identifier (Loc, Name_V), Expressions => New_References_To (Index_List, Loc)); Set_Etype (Comp_Ref, Comp_Typ); -- Generate: -- [Deep_]Adjust (V (J1, ..., JN)) if Prim = Adjust_Case then Call := Make_Adjust_Call (Obj_Ref => Comp_Ref, Typ => Comp_Typ); -- Generate: -- [Deep_]Finalize (V (J1, ..., JN)) else pragma Assert (Prim = Finalize_Case); Call := Make_Final_Call (Obj_Ref => Comp_Ref, Typ => Comp_Typ); end if; if Present (Call) then -- Generate the block which houses the adjust or finalize call: -- begin -- -- exception -- when others => -- if not Raised then -- Raised := True; -- Save_Occurrence (E, Get_Current_Excep.all.all); -- end if; -- end; if Exceptions_OK then Core_Loop := Make_Block_Statement (Loc, Handled_Statement_Sequence => Make_Handled_Sequence_Of_Statements (Loc, Statements => New_List (Call), Exception_Handlers => New_List ( Build_Exception_Handler (Final_Data)))); else Core_Loop := Call; end if; -- Generate the dimension loops starting from the innermost one -- for Jnn in [reverse] V'Range (Dim) loop -- -- end loop; J := Last (Index_List); Dim := Num_Dims; while Present (J) and then Dim > 0 loop Loop_Id := J; Prev (J); Remove (Loop_Id); Core_Loop := Make_Loop_Statement (Loc, Iteration_Scheme => Make_Iteration_Scheme (Loc, Loop_Parameter_Specification => Make_Loop_Parameter_Specification (Loc, Defining_Identifier => Loop_Id, Discrete_Subtype_Definition => Make_Attribute_Reference (Loc, Prefix => Make_Identifier (Loc, Name_V), Attribute_Name => Name_Range, Expressions => New_List ( Make_Integer_Literal (Loc, Dim))), Reverse_Present => Prim = Finalize_Case)), Statements => New_List (Core_Loop), End_Label => Empty); Dim := Dim - 1; end loop; -- Generate the block which contains the core loop, declarations -- of the abort flag, the exception occurrence, the raised flag -- and the conditional raise: -- declare -- Abort : constant Boolean := Triggered_By_Abort; -- -- Abort : constant Boolean := False; -- no abort -- E : Exception_Occurrence; -- Raised : Boolean := False; -- begin -- -- if Raised and then not Abort then -- Raise_From_Controlled_Operation (E); -- end if; -- end; Stmts := New_List (Core_Loop); if Exceptions_OK then Append_To (Stmts, Build_Raise_Statement (Final_Data)); end if; Block := Make_Block_Statement (Loc, Declarations => Final_Decls, Handled_Statement_Sequence => Make_Handled_Sequence_Of_Statements (Loc, Statements => Stmts)); -- Otherwise previous errors or a missing full view may prevent the -- proper freezing of the component type. If this is the case, there -- is no [Deep_]Adjust or [Deep_]Finalize primitive to call. else Block := Make_Null_Statement (Loc); end if; return New_List (Block); end Build_Adjust_Or_Finalize_Statements; --------------------------------- -- Build_Initialize_Statements -- --------------------------------- function Build_Initialize_Statements (Typ : Entity_Id) return List_Id is Comp_Typ : constant Entity_Id := Component_Type (Typ); Final_List : constant List_Id := New_List; Index_List : constant List_Id := New_List; Loc : constant Source_Ptr := Sloc (Typ); Num_Dims : constant Int := Number_Dimensions (Typ); function Build_Assignment (Counter_Id : Entity_Id) return Node_Id; -- Generate the following assignment: -- Counter := V'Length (1) * -- ... -- V'Length (N) - Counter; -- -- Counter_Id denotes the entity of the counter. function Build_Finalization_Call return Node_Id; -- Generate a deep finalization call for an array element procedure Build_Indexes; -- Generate the initialization and finalization indexes used in the -- dimension loops. function Build_Initialization_Call return Node_Id; -- Generate a deep initialization call for an array element ---------------------- -- Build_Assignment -- ---------------------- function Build_Assignment (Counter_Id : Entity_Id) return Node_Id is Dim : Int; Expr : Node_Id; begin -- Start from the first dimension and generate: -- V'Length (1) Dim := 1; Expr := Make_Attribute_Reference (Loc, Prefix => Make_Identifier (Loc, Name_V), Attribute_Name => Name_Length, Expressions => New_List (Make_Integer_Literal (Loc, Dim))); -- Process the rest of the dimensions, generate: -- Expr * V'Length (N) Dim := Dim + 1; while Dim <= Num_Dims loop Expr := Make_Op_Multiply (Loc, Left_Opnd => Expr, Right_Opnd => Make_Attribute_Reference (Loc, Prefix => Make_Identifier (Loc, Name_V), Attribute_Name => Name_Length, Expressions => New_List ( Make_Integer_Literal (Loc, Dim)))); Dim := Dim + 1; end loop; -- Generate: -- Counter := Expr - Counter; return Make_Assignment_Statement (Loc, Name => New_Occurrence_Of (Counter_Id, Loc), Expression => Make_Op_Subtract (Loc, Left_Opnd => Expr, Right_Opnd => New_Occurrence_Of (Counter_Id, Loc))); end Build_Assignment; ----------------------------- -- Build_Finalization_Call -- ----------------------------- function Build_Finalization_Call return Node_Id is Comp_Ref : constant Node_Id := Make_Indexed_Component (Loc, Prefix => Make_Identifier (Loc, Name_V), Expressions => New_References_To (Final_List, Loc)); begin Set_Etype (Comp_Ref, Comp_Typ); -- Generate: -- [Deep_]Finalize (V); return Make_Final_Call (Obj_Ref => Comp_Ref, Typ => Comp_Typ); end Build_Finalization_Call; ------------------- -- Build_Indexes -- ------------------- procedure Build_Indexes is begin -- Generate the following identifiers: -- Jnn - for initialization -- Fnn - for finalization for Dim in 1 .. Num_Dims loop Append_To (Index_List, Make_Defining_Identifier (Loc, New_External_Name ('J', Dim))); Append_To (Final_List, Make_Defining_Identifier (Loc, New_External_Name ('F', Dim))); end loop; end Build_Indexes; ------------------------------- -- Build_Initialization_Call -- ------------------------------- function Build_Initialization_Call return Node_Id is Comp_Ref : constant Node_Id := Make_Indexed_Component (Loc, Prefix => Make_Identifier (Loc, Name_V), Expressions => New_References_To (Index_List, Loc)); begin Set_Etype (Comp_Ref, Comp_Typ); -- Generate: -- [Deep_]Initialize (V (J1, ..., JN)); return Make_Init_Call (Obj_Ref => Comp_Ref, Typ => Comp_Typ); end Build_Initialization_Call; -- Local variables Counter_Id : Entity_Id; Dim : Int; F : Node_Id; Fin_Stmt : Node_Id; Final_Block : Node_Id; Final_Data : Finalization_Exception_Data; Final_Decls : List_Id := No_List; Final_Loop : Node_Id; Init_Block : Node_Id; Init_Call : Node_Id; Init_Loop : Node_Id; J : Node_Id; Loop_Id : Node_Id; Stmts : List_Id; -- Start of processing for Build_Initialize_Statements begin Counter_Id := Make_Temporary (Loc, 'C'); Final_Decls := New_List; Build_Indexes; Build_Object_Declarations (Final_Data, Final_Decls, Loc); -- Generate the block which houses the finalization call, the index -- guard and the handler which triggers Program_Error later on. -- if Counter > 0 then -- Counter := Counter - 1; -- else -- begin -- [Deep_]Finalize (V (F1, ..., FN)); -- exception -- when others => -- if not Raised then -- Raised := True; -- Save_Occurrence (E, Get_Current_Excep.all.all); -- end if; -- end; -- end if; Fin_Stmt := Build_Finalization_Call; if Present (Fin_Stmt) then if Exceptions_OK then Fin_Stmt := Make_Block_Statement (Loc, Handled_Statement_Sequence => Make_Handled_Sequence_Of_Statements (Loc, Statements => New_List (Fin_Stmt), Exception_Handlers => New_List ( Build_Exception_Handler (Final_Data)))); end if; -- This is the core of the loop, the dimension iterators are added -- one by one in reverse. Final_Loop := Make_If_Statement (Loc, Condition => Make_Op_Gt (Loc, Left_Opnd => New_Occurrence_Of (Counter_Id, Loc), Right_Opnd => Make_Integer_Literal (Loc, 0)), Then_Statements => New_List ( Make_Assignment_Statement (Loc, Name => New_Occurrence_Of (Counter_Id, Loc), Expression => Make_Op_Subtract (Loc, Left_Opnd => New_Occurrence_Of (Counter_Id, Loc), Right_Opnd => Make_Integer_Literal (Loc, 1)))), Else_Statements => New_List (Fin_Stmt)); -- Generate all finalization loops starting from the innermost -- dimension. -- for Fnn in reverse V'Range (Dim) loop -- -- end loop; F := Last (Final_List); Dim := Num_Dims; while Present (F) and then Dim > 0 loop Loop_Id := F; Prev (F); Remove (Loop_Id); Final_Loop := Make_Loop_Statement (Loc, Iteration_Scheme => Make_Iteration_Scheme (Loc, Loop_Parameter_Specification => Make_Loop_Parameter_Specification (Loc, Defining_Identifier => Loop_Id, Discrete_Subtype_Definition => Make_Attribute_Reference (Loc, Prefix => Make_Identifier (Loc, Name_V), Attribute_Name => Name_Range, Expressions => New_List ( Make_Integer_Literal (Loc, Dim))), Reverse_Present => True)), Statements => New_List (Final_Loop), End_Label => Empty); Dim := Dim - 1; end loop; -- Generate the block which contains the finalization loops, the -- declarations of the abort flag, the exception occurrence, the -- raised flag and the conditional raise. -- declare -- Abort : constant Boolean := Triggered_By_Abort; -- -- Abort : constant Boolean := False; -- no abort -- E : Exception_Occurrence; -- Raised : Boolean := False; -- begin -- Counter := -- V'Length (1) * -- ... -- V'Length (N) - Counter; -- -- if Raised and then not Abort then -- Raise_From_Controlled_Operation (E); -- end if; -- raise; -- end; Stmts := New_List (Build_Assignment (Counter_Id), Final_Loop); if Exceptions_OK then Append_To (Stmts, Build_Raise_Statement (Final_Data)); Append_To (Stmts, Make_Raise_Statement (Loc)); end if; Final_Block := Make_Block_Statement (Loc, Declarations => Final_Decls, Handled_Statement_Sequence => Make_Handled_Sequence_Of_Statements (Loc, Statements => Stmts)); -- Otherwise previous errors or a missing full view may prevent the -- proper freezing of the component type. If this is the case, there -- is no [Deep_]Finalize primitive to call. else Final_Block := Make_Null_Statement (Loc); end if; -- Generate the block which contains the initialization call and -- the partial finalization code. -- begin -- [Deep_]Initialize (V (J1, ..., JN)); -- Counter := Counter + 1; -- exception -- when others => -- -- end; Init_Call := Build_Initialization_Call; -- Only create finalization block if there is a nontrivial call -- to initialization or a Default_Initial_Condition check to be -- performed. if (Present (Init_Call) and then Nkind (Init_Call) /= N_Null_Statement) or else (Has_DIC (Comp_Typ) and then not GNATprove_Mode and then Present (DIC_Procedure (Comp_Typ)) and then not Has_Null_Body (DIC_Procedure (Comp_Typ))) then declare Init_Stmts : constant List_Id := New_List; begin if Present (Init_Call) then Append_To (Init_Stmts, Init_Call); end if; if Has_DIC (Comp_Typ) and then Present (DIC_Procedure (Comp_Typ)) then Append_To (Init_Stmts, Build_DIC_Call (Loc, Make_Indexed_Component (Loc, Prefix => Make_Identifier (Loc, Name_V), Expressions => New_References_To (Index_List, Loc)), Comp_Typ)); end if; Init_Loop := Make_Block_Statement (Loc, Handled_Statement_Sequence => Make_Handled_Sequence_Of_Statements (Loc, Statements => Init_Stmts, Exception_Handlers => New_List ( Make_Exception_Handler (Loc, Exception_Choices => New_List ( Make_Others_Choice (Loc)), Statements => New_List (Final_Block))))); end; Append_To (Statements (Handled_Statement_Sequence (Init_Loop)), Make_Assignment_Statement (Loc, Name => New_Occurrence_Of (Counter_Id, Loc), Expression => Make_Op_Add (Loc, Left_Opnd => New_Occurrence_Of (Counter_Id, Loc), Right_Opnd => Make_Integer_Literal (Loc, 1)))); -- Generate all initialization loops starting from the innermost -- dimension. -- for Jnn in V'Range (Dim) loop -- -- end loop; J := Last (Index_List); Dim := Num_Dims; while Present (J) and then Dim > 0 loop Loop_Id := J; Prev (J); Remove (Loop_Id); Init_Loop := Make_Loop_Statement (Loc, Iteration_Scheme => Make_Iteration_Scheme (Loc, Loop_Parameter_Specification => Make_Loop_Parameter_Specification (Loc, Defining_Identifier => Loop_Id, Discrete_Subtype_Definition => Make_Attribute_Reference (Loc, Prefix => Make_Identifier (Loc, Name_V), Attribute_Name => Name_Range, Expressions => New_List ( Make_Integer_Literal (Loc, Dim))))), Statements => New_List (Init_Loop), End_Label => Empty); Dim := Dim - 1; end loop; -- Generate the block which contains the counter variable and the -- initialization loops. -- declare -- Counter : Integer := 0; -- begin -- -- end; Init_Block := Make_Block_Statement (Loc, Declarations => New_List ( Make_Object_Declaration (Loc, Defining_Identifier => Counter_Id, Object_Definition => New_Occurrence_Of (Standard_Integer, Loc), Expression => Make_Integer_Literal (Loc, 0))), Handled_Statement_Sequence => Make_Handled_Sequence_Of_Statements (Loc, Statements => New_List (Init_Loop))); if Debug_Generated_Code then Set_Debug_Info_Needed (Counter_Id); end if; -- Otherwise previous errors or a missing full view may prevent the -- proper freezing of the component type. If this is the case, there -- is no [Deep_]Initialize primitive to call. else Init_Block := Make_Null_Statement (Loc); end if; return New_List (Init_Block); end Build_Initialize_Statements; ----------------------- -- New_References_To -- ----------------------- function New_References_To (L : List_Id; Loc : Source_Ptr) return List_Id is Refs : constant List_Id := New_List; Id : Node_Id; begin Id := First (L); while Present (Id) loop Append_To (Refs, New_Occurrence_Of (Id, Loc)); Next (Id); end loop; return Refs; end New_References_To; -- Start of processing for Make_Deep_Array_Body begin case Prim is when Address_Case => return Make_Finalize_Address_Stmts (Typ); when Adjust_Case | Finalize_Case => return Build_Adjust_Or_Finalize_Statements (Typ); when Initialize_Case => return Build_Initialize_Statements (Typ); end case; end Make_Deep_Array_Body; -------------------- -- Make_Deep_Proc -- -------------------- function Make_Deep_Proc (Prim : Final_Primitives; Typ : Entity_Id; Stmts : List_Id) return Entity_Id is Loc : constant Source_Ptr := Sloc (Typ); Formals : List_Id; Proc_Id : Entity_Id; begin -- Create the object formal, generate: -- V : System.Address if Prim = Address_Case then Formals := New_List ( Make_Parameter_Specification (Loc, Defining_Identifier => Make_Defining_Identifier (Loc, Name_V), Parameter_Type => New_Occurrence_Of (RTE (RE_Address), Loc))); -- Default case else -- V : in out Typ Formals := New_List ( Make_Parameter_Specification (Loc, Defining_Identifier => Make_Defining_Identifier (Loc, Name_V), In_Present => True, Out_Present => True, Parameter_Type => New_Occurrence_Of (Typ, Loc))); -- F : Boolean := True if Prim = Adjust_Case or else Prim = Finalize_Case then Append_To (Formals, Make_Parameter_Specification (Loc, Defining_Identifier => Make_Defining_Identifier (Loc, Name_F), Parameter_Type => New_Occurrence_Of (Standard_Boolean, Loc), Expression => New_Occurrence_Of (Standard_True, Loc))); end if; end if; Proc_Id := Make_Defining_Identifier (Loc, Chars => Make_TSS_Name (Typ, Deep_Name_Of (Prim))); -- Generate: -- procedure Deep_Initialize / Adjust / Finalize (V : in out ) is -- begin -- -- exception -- Finalize and Adjust cases only -- raise Program_Error; -- end Deep_Initialize / Adjust / Finalize; -- or -- procedure Finalize_Address (V : System.Address) is -- begin -- -- end Finalize_Address; Discard_Node ( Make_Subprogram_Body (Loc, Specification => Make_Procedure_Specification (Loc, Defining_Unit_Name => Proc_Id, Parameter_Specifications => Formals), Declarations => Empty_List, Handled_Statement_Sequence => Make_Handled_Sequence_Of_Statements (Loc, Statements => Stmts))); -- If there are no calls to component initialization, indicate that -- the procedure is trivial, so prevent calls to it. if Is_Empty_List (Stmts) or else Nkind (First (Stmts)) = N_Null_Statement then Set_Is_Trivial_Subprogram (Proc_Id); end if; return Proc_Id; end Make_Deep_Proc; --------------------------- -- Make_Deep_Record_Body -- --------------------------- function Make_Deep_Record_Body (Prim : Final_Primitives; Typ : Entity_Id; Is_Local : Boolean := False) return List_Id is function Build_Adjust_Statements (Typ : Entity_Id) return List_Id; -- Build the statements necessary to adjust a record type. The type may -- have discriminants and contain variant parts. Generate: -- -- begin -- begin -- [Deep_]Adjust (V.Comp_1); -- exception -- when Id : others => -- if not Raised then -- Raised := True; -- Save_Occurrence (E, Get_Current_Excep.all.all); -- end if; -- end; -- . . . -- begin -- [Deep_]Adjust (V.Comp_N); -- exception -- when Id : others => -- if not Raised then -- Raised := True; -- Save_Occurrence (E, Get_Current_Excep.all.all); -- end if; -- end; -- -- begin -- Deep_Adjust (V._parent, False); -- If applicable -- exception -- when Id : others => -- if not Raised then -- Raised := True; -- Save_Occurrence (E, Get_Current_Excep.all.all); -- end if; -- end; -- -- if F then -- begin -- Adjust (V); -- If applicable -- exception -- when others => -- if not Raised then -- Raised := True; -- Save_Occurrence (E, Get_Current_Excep.all.all); -- end if; -- end; -- end if; -- -- if Raised and then not Abort then -- Raise_From_Controlled_Operation (E); -- end if; -- end; function Build_Finalize_Statements (Typ : Entity_Id) return List_Id; -- Build the statements necessary to finalize a record type. The type -- may have discriminants and contain variant parts. Generate: -- -- declare -- Abort : constant Boolean := Triggered_By_Abort; -- -- Abort : constant Boolean := False; -- no abort -- E : Exception_Occurrence; -- Raised : Boolean := False; -- -- begin -- if F then -- begin -- Finalize (V); -- If applicable -- exception -- when others => -- if not Raised then -- Raised := True; -- Save_Occurrence (E, Get_Current_Excep.all.all); -- end if; -- end; -- end if; -- -- case Variant_1 is -- when Value_1 => -- case State_Counter_N => -- If Is_Local is enabled -- when N => . -- goto LN; . -- ... . -- when 1 => . -- goto L1; . -- when others => . -- goto L0; . -- end case; . -- -- <> -- If Is_Local is enabled -- begin -- [Deep_]Finalize (V.Comp_N); -- exception -- when others => -- if not Raised then -- Raised := True; -- Save_Occurrence (E, Get_Current_Excep.all.all); -- end if; -- end; -- . . . -- <> -- begin -- [Deep_]Finalize (V.Comp_1); -- exception -- when others => -- if not Raised then -- Raised := True; -- Save_Occurrence (E, Get_Current_Excep.all.all); -- end if; -- end; -- <> -- end case; -- -- case State_Counter_1 => -- If Is_Local is enabled -- when M => . -- goto LM; . -- ... -- -- begin -- Deep_Finalize (V._parent, False); -- If applicable -- exception -- when Id : others => -- if not Raised then -- Raised := True; -- Save_Occurrence (E, Get_Current_Excep.all.all); -- end if; -- end; -- -- if Raised and then not Abort then -- Raise_From_Controlled_Operation (E); -- end if; -- end; function Parent_Field_Type (Typ : Entity_Id) return Entity_Id; -- Given a derived tagged type Typ, traverse all components, find field -- _parent and return its type. procedure Preprocess_Components (Comps : Node_Id; Num_Comps : out Nat; Has_POC : out Boolean); -- Examine all components in component list Comps, count all controlled -- components and determine whether at least one of them is per-object -- constrained. Component _parent is always skipped. ----------------------------- -- Build_Adjust_Statements -- ----------------------------- function Build_Adjust_Statements (Typ : Entity_Id) return List_Id is Loc : constant Source_Ptr := Sloc (Typ); Typ_Def : constant Node_Id := Type_Definition (Parent (Typ)); Finalizer_Data : Finalization_Exception_Data; function Process_Component_List_For_Adjust (Comps : Node_Id) return List_Id; -- Build all necessary adjust statements for a single component list --------------------------------------- -- Process_Component_List_For_Adjust -- --------------------------------------- function Process_Component_List_For_Adjust (Comps : Node_Id) return List_Id is Stmts : constant List_Id := New_List; procedure Process_Component_For_Adjust (Decl : Node_Id); -- Process the declaration of a single controlled component ---------------------------------- -- Process_Component_For_Adjust -- ---------------------------------- procedure Process_Component_For_Adjust (Decl : Node_Id) is Id : constant Entity_Id := Defining_Identifier (Decl); Typ : constant Entity_Id := Etype (Id); Adj_Call : Node_Id; begin -- begin -- [Deep_]Adjust (V.Id); -- exception -- when others => -- if not Raised then -- Raised := True; -- Save_Occurrence (E, Get_Current_Excep.all.all); -- end if; -- end; Adj_Call := Make_Adjust_Call ( Obj_Ref => Make_Selected_Component (Loc, Prefix => Make_Identifier (Loc, Name_V), Selector_Name => Make_Identifier (Loc, Chars (Id))), Typ => Typ); -- Guard against a missing [Deep_]Adjust when the component -- type was not properly frozen. if Present (Adj_Call) then if Exceptions_OK then Adj_Call := Make_Block_Statement (Loc, Handled_Statement_Sequence => Make_Handled_Sequence_Of_Statements (Loc, Statements => New_List (Adj_Call), Exception_Handlers => New_List ( Build_Exception_Handler (Finalizer_Data)))); end if; Append_To (Stmts, Adj_Call); end if; end Process_Component_For_Adjust; -- Local variables Decl : Node_Id; Decl_Id : Entity_Id; Decl_Typ : Entity_Id; Has_POC : Boolean; Num_Comps : Nat; Var_Case : Node_Id; -- Start of processing for Process_Component_List_For_Adjust begin -- Perform an initial check, determine the number of controlled -- components in the current list and whether at least one of them -- is per-object constrained. Preprocess_Components (Comps, Num_Comps, Has_POC); -- The processing in this routine is done in the following order: -- 1) Regular components -- 2) Per-object constrained components -- 3) Variant parts if Num_Comps > 0 then -- Process all regular components in order of declarations Decl := First_Non_Pragma (Component_Items (Comps)); while Present (Decl) loop Decl_Id := Defining_Identifier (Decl); Decl_Typ := Etype (Decl_Id); -- Skip _parent as well as per-object constrained components if Chars (Decl_Id) /= Name_uParent and then Needs_Finalization (Decl_Typ) then if Has_Access_Constraint (Decl_Id) and then No (Expression (Decl)) then null; else Process_Component_For_Adjust (Decl); end if; end if; Next_Non_Pragma (Decl); end loop; -- Process all per-object constrained components in order of -- declarations. if Has_POC then Decl := First_Non_Pragma (Component_Items (Comps)); while Present (Decl) loop Decl_Id := Defining_Identifier (Decl); Decl_Typ := Etype (Decl_Id); -- Skip _parent if Chars (Decl_Id) /= Name_uParent and then Needs_Finalization (Decl_Typ) and then Has_Access_Constraint (Decl_Id) and then No (Expression (Decl)) then Process_Component_For_Adjust (Decl); end if; Next_Non_Pragma (Decl); end loop; end if; end if; -- Process all variants, if any Var_Case := Empty; if Present (Variant_Part (Comps)) then declare Var_Alts : constant List_Id := New_List; Var : Node_Id; begin Var := First_Non_Pragma (Variants (Variant_Part (Comps))); while Present (Var) loop -- Generate: -- when => -- Append_To (Var_Alts, Make_Case_Statement_Alternative (Loc, Discrete_Choices => New_Copy_List (Discrete_Choices (Var)), Statements => Process_Component_List_For_Adjust ( Component_List (Var)))); Next_Non_Pragma (Var); end loop; -- Generate: -- case V. is -- when => -- -- ... -- when => -- -- end case; Var_Case := Make_Case_Statement (Loc, Expression => Make_Selected_Component (Loc, Prefix => Make_Identifier (Loc, Name_V), Selector_Name => Make_Identifier (Loc, Chars => Chars (Name (Variant_Part (Comps))))), Alternatives => Var_Alts); end; end if; -- Add the variant case statement to the list of statements if Present (Var_Case) then Append_To (Stmts, Var_Case); end if; -- If the component list did not have any controlled components -- nor variants, return null. if Is_Empty_List (Stmts) then Append_To (Stmts, Make_Null_Statement (Loc)); end if; return Stmts; end Process_Component_List_For_Adjust; -- Local variables Bod_Stmts : List_Id := No_List; Finalizer_Decls : List_Id := No_List; Rec_Def : Node_Id; -- Start of processing for Build_Adjust_Statements begin Finalizer_Decls := New_List; Build_Object_Declarations (Finalizer_Data, Finalizer_Decls, Loc); if Nkind (Typ_Def) = N_Derived_Type_Definition then Rec_Def := Record_Extension_Part (Typ_Def); else Rec_Def := Typ_Def; end if; -- Create an adjust sequence for all record components if Present (Component_List (Rec_Def)) then Bod_Stmts := Process_Component_List_For_Adjust (Component_List (Rec_Def)); end if; -- A derived record type must adjust all inherited components. This -- action poses the following problem: -- procedure Deep_Adjust (Obj : in out Parent_Typ) is -- begin -- Adjust (Obj); -- ... -- procedure Deep_Adjust (Obj : in out Derived_Typ) is -- begin -- Deep_Adjust (Obj._parent); -- ... -- Adjust (Obj); -- ... -- Adjusting the derived type will invoke Adjust of the parent and -- then that of the derived type. This is undesirable because both -- routines may modify shared components. Only the Adjust of the -- derived type should be invoked. -- To prevent this double adjustment of shared components, -- Deep_Adjust uses a flag to control the invocation of Adjust: -- procedure Deep_Adjust -- (Obj : in out Some_Type; -- Flag : Boolean := True) -- is -- begin -- if Flag then -- Adjust (Obj); -- end if; -- ... -- When Deep_Adjust is invoked for field _parent, a value of False is -- provided for the flag: -- Deep_Adjust (Obj._parent, False); if Is_Tagged_Type (Typ) and then Is_Derived_Type (Typ) then declare Par_Typ : constant Entity_Id := Parent_Field_Type (Typ); Adj_Stmt : Node_Id; Call : Node_Id; begin if Needs_Finalization (Par_Typ) then Call := Make_Adjust_Call (Obj_Ref => Make_Selected_Component (Loc, Prefix => Make_Identifier (Loc, Name_V), Selector_Name => Make_Identifier (Loc, Name_uParent)), Typ => Par_Typ, Skip_Self => True); -- Generate: -- begin -- Deep_Adjust (V._parent, False); -- exception -- when Id : others => -- if not Raised then -- Raised := True; -- Save_Occurrence (E, -- Get_Current_Excep.all.all); -- end if; -- end; if Present (Call) then Adj_Stmt := Call; if Exceptions_OK then Adj_Stmt := Make_Block_Statement (Loc, Handled_Statement_Sequence => Make_Handled_Sequence_Of_Statements (Loc, Statements => New_List (Adj_Stmt), Exception_Handlers => New_List ( Build_Exception_Handler (Finalizer_Data)))); end if; Prepend_To (Bod_Stmts, Adj_Stmt); end if; end if; end; end if; -- Adjust the object. This action must be performed last after all -- components have been adjusted. if Is_Controlled (Typ) then declare Adj_Stmt : Node_Id; Proc : Entity_Id; begin Proc := Find_Optional_Prim_Op (Typ, Name_Adjust); -- Generate: -- if F then -- begin -- Adjust (V); -- exception -- when others => -- if not Raised then -- Raised := True; -- Save_Occurrence (E, -- Get_Current_Excep.all.all); -- end if; -- end; -- end if; if Present (Proc) then Adj_Stmt := Make_Procedure_Call_Statement (Loc, Name => New_Occurrence_Of (Proc, Loc), Parameter_Associations => New_List ( Make_Identifier (Loc, Name_V))); if Exceptions_OK then Adj_Stmt := Make_Block_Statement (Loc, Handled_Statement_Sequence => Make_Handled_Sequence_Of_Statements (Loc, Statements => New_List (Adj_Stmt), Exception_Handlers => New_List ( Build_Exception_Handler (Finalizer_Data)))); end if; Append_To (Bod_Stmts, Make_If_Statement (Loc, Condition => Make_Identifier (Loc, Name_F), Then_Statements => New_List (Adj_Stmt))); end if; end; end if; -- At this point either all adjustment statements have been generated -- or the type is not controlled. if Is_Empty_List (Bod_Stmts) then Append_To (Bod_Stmts, Make_Null_Statement (Loc)); return Bod_Stmts; -- Generate: -- declare -- Abort : constant Boolean := Triggered_By_Abort; -- -- Abort : constant Boolean := False; -- no abort -- E : Exception_Occurrence; -- Raised : Boolean := False; -- begin -- -- if Raised and then not Abort then -- Raise_From_Controlled_Operation (E); -- end if; -- end; else if Exceptions_OK then Append_To (Bod_Stmts, Build_Raise_Statement (Finalizer_Data)); end if; return New_List ( Make_Block_Statement (Loc, Declarations => Finalizer_Decls, Handled_Statement_Sequence => Make_Handled_Sequence_Of_Statements (Loc, Bod_Stmts))); end if; end Build_Adjust_Statements; ------------------------------- -- Build_Finalize_Statements -- ------------------------------- function Build_Finalize_Statements (Typ : Entity_Id) return List_Id is Loc : constant Source_Ptr := Sloc (Typ); Typ_Def : constant Node_Id := Type_Definition (Parent (Typ)); Counter : Nat := 0; Finalizer_Data : Finalization_Exception_Data; Last_POC_Call : Node_Id := Empty; function Process_Component_List_For_Finalize (Comps : Node_Id; In_Variant_Part : Boolean := False) return List_Id; -- Build all necessary finalization statements for a single component -- list. The statements may include a jump circuitry if flag Is_Local -- is enabled. In_Variant_Part indicates whether this is a recursive -- call. ----------------------------------------- -- Process_Component_List_For_Finalize -- ----------------------------------------- function Process_Component_List_For_Finalize (Comps : Node_Id; In_Variant_Part : Boolean := False) return List_Id is procedure Process_Component_For_Finalize (Decl : Node_Id; Alts : List_Id; Decls : List_Id; Stmts : List_Id; Num_Comps : in out Nat); -- Process the declaration of a single controlled component. If -- flag Is_Local is enabled, create the corresponding label and -- jump circuitry. Alts is the list of case alternatives, Decls -- is the top level declaration list where labels are declared -- and Stmts is the list of finalization actions. Num_Comps -- denotes the current number of components needing finalization. ------------------------------------ -- Process_Component_For_Finalize -- ------------------------------------ procedure Process_Component_For_Finalize (Decl : Node_Id; Alts : List_Id; Decls : List_Id; Stmts : List_Id; Num_Comps : in out Nat) is Id : constant Entity_Id := Defining_Identifier (Decl); Typ : constant Entity_Id := Etype (Id); Fin_Call : Node_Id; begin if Is_Local then declare Label : Node_Id; Label_Id : Entity_Id; begin -- Generate: -- LN : label; Label_Id := Make_Identifier (Loc, Chars => New_External_Name ('L', Num_Comps)); Set_Entity (Label_Id, Make_Defining_Identifier (Loc, Chars (Label_Id))); Label := Make_Label (Loc, Label_Id); Append_To (Decls, Make_Implicit_Label_Declaration (Loc, Defining_Identifier => Entity (Label_Id), Label_Construct => Label)); -- Generate: -- when N => -- goto LN; Append_To (Alts, Make_Case_Statement_Alternative (Loc, Discrete_Choices => New_List ( Make_Integer_Literal (Loc, Num_Comps)), Statements => New_List ( Make_Goto_Statement (Loc, Name => New_Occurrence_Of (Entity (Label_Id), Loc))))); -- Generate: -- <> Append_To (Stmts, Label); -- Decrease the number of components to be processed. -- This action yields a new Label_Id in future calls. Num_Comps := Num_Comps - 1; end; end if; -- Generate: -- [Deep_]Finalize (V.Id); -- No_Exception_Propagation -- begin -- Exception handlers allowed -- [Deep_]Finalize (V.Id); -- exception -- when others => -- if not Raised then -- Raised := True; -- Save_Occurrence (E, -- Get_Current_Excep.all.all); -- end if; -- end; Fin_Call := Make_Final_Call (Obj_Ref => Make_Selected_Component (Loc, Prefix => Make_Identifier (Loc, Name_V), Selector_Name => Make_Identifier (Loc, Chars (Id))), Typ => Typ); -- Guard against a missing [Deep_]Finalize when the component -- type was not properly frozen. if Present (Fin_Call) then if Exceptions_OK then Fin_Call := Make_Block_Statement (Loc, Handled_Statement_Sequence => Make_Handled_Sequence_Of_Statements (Loc, Statements => New_List (Fin_Call), Exception_Handlers => New_List ( Build_Exception_Handler (Finalizer_Data)))); end if; Append_To (Stmts, Fin_Call); end if; end Process_Component_For_Finalize; -- Local variables Alts : List_Id; Counter_Id : Entity_Id := Empty; Decl : Node_Id; Decl_Id : Entity_Id; Decl_Typ : Entity_Id; Decls : List_Id; Has_POC : Boolean; Jump_Block : Node_Id; Label : Node_Id; Label_Id : Entity_Id; Num_Comps : Nat; Stmts : List_Id; Var_Case : Node_Id; -- Start of processing for Process_Component_List_For_Finalize begin -- Perform an initial check, look for controlled and per-object -- constrained components. Preprocess_Components (Comps, Num_Comps, Has_POC); -- Create a state counter to service the current component list. -- This step is performed before the variants are inspected in -- order to generate the same state counter names as those from -- Build_Initialize_Statements. if Num_Comps > 0 and then Is_Local then Counter := Counter + 1; Counter_Id := Make_Defining_Identifier (Loc, Chars => New_External_Name ('C', Counter)); end if; -- Process the component in the following order: -- 1) Variants -- 2) Per-object constrained components -- 3) Regular components -- Start with the variant parts Var_Case := Empty; if Present (Variant_Part (Comps)) then declare Var_Alts : constant List_Id := New_List; Var : Node_Id; begin Var := First_Non_Pragma (Variants (Variant_Part (Comps))); while Present (Var) loop -- Generate: -- when => -- Append_To (Var_Alts, Make_Case_Statement_Alternative (Loc, Discrete_Choices => New_Copy_List (Discrete_Choices (Var)), Statements => Process_Component_List_For_Finalize ( Component_List (Var), In_Variant_Part => True))); Next_Non_Pragma (Var); end loop; -- Generate: -- case V. is -- when => -- -- ... -- when => -- -- end case; Var_Case := Make_Case_Statement (Loc, Expression => Make_Selected_Component (Loc, Prefix => Make_Identifier (Loc, Name_V), Selector_Name => Make_Identifier (Loc, Chars => Chars (Name (Variant_Part (Comps))))), Alternatives => Var_Alts); end; end if; -- The current component list does not have a single controlled -- component, however it may contain variants. Return the case -- statement for the variants or nothing. if Num_Comps = 0 then if Present (Var_Case) then return New_List (Var_Case); else return New_List (Make_Null_Statement (Loc)); end if; end if; -- Prepare all lists Alts := New_List; Decls := New_List; Stmts := New_List; -- Process all per-object constrained components in reverse order if Has_POC then Decl := Last_Non_Pragma (Component_Items (Comps)); while Present (Decl) loop Decl_Id := Defining_Identifier (Decl); Decl_Typ := Etype (Decl_Id); -- Skip _parent if Chars (Decl_Id) /= Name_uParent and then Needs_Finalization (Decl_Typ) and then Has_Access_Constraint (Decl_Id) and then No (Expression (Decl)) then Process_Component_For_Finalize (Decl, Alts, Decls, Stmts, Num_Comps); end if; Prev_Non_Pragma (Decl); end loop; end if; if not In_Variant_Part then Last_POC_Call := Last (Stmts); -- In the case of a type extension, the deep-finalize call -- for the _Parent component will be inserted here. end if; -- Process the rest of the components in reverse order Decl := Last_Non_Pragma (Component_Items (Comps)); while Present (Decl) loop Decl_Id := Defining_Identifier (Decl); Decl_Typ := Etype (Decl_Id); -- Skip _parent if Chars (Decl_Id) /= Name_uParent and then Needs_Finalization (Decl_Typ) then -- Skip per-object constrained components since they were -- handled in the above step. if Has_Access_Constraint (Decl_Id) and then No (Expression (Decl)) then null; else Process_Component_For_Finalize (Decl, Alts, Decls, Stmts, Num_Comps); end if; end if; Prev_Non_Pragma (Decl); end loop; -- Generate: -- declare -- LN : label; -- If Is_Local is enabled -- ... . -- L0 : label; . -- begin . -- case CounterX is . -- when N => . -- goto LN; . -- ... . -- when 1 => . -- goto L1; . -- when others => . -- goto L0; . -- end case; . -- <> -- If Is_Local is enabled -- begin -- [Deep_]Finalize (V.CompY); -- exception -- when Id : others => -- if not Raised then -- Raised := True; -- Save_Occurrence (E, -- Get_Current_Excep.all.all); -- end if; -- end; -- ... -- <> -- If Is_Local is enabled -- end; if Is_Local then -- Add the declaration of default jump location L0, its -- corresponding alternative and its place in the statements. Label_Id := Make_Identifier (Loc, New_External_Name ('L', 0)); Set_Entity (Label_Id, Make_Defining_Identifier (Loc, Chars (Label_Id))); Label := Make_Label (Loc, Label_Id); Append_To (Decls, -- declaration Make_Implicit_Label_Declaration (Loc, Defining_Identifier => Entity (Label_Id), Label_Construct => Label)); Append_To (Alts, -- alternative Make_Case_Statement_Alternative (Loc, Discrete_Choices => New_List ( Make_Others_Choice (Loc)), Statements => New_List ( Make_Goto_Statement (Loc, Name => New_Occurrence_Of (Entity (Label_Id), Loc))))); Append_To (Stmts, Label); -- statement -- Create the jump block Prepend_To (Stmts, Make_Case_Statement (Loc, Expression => Make_Identifier (Loc, Chars (Counter_Id)), Alternatives => Alts)); end if; Jump_Block := Make_Block_Statement (Loc, Declarations => Decls, Handled_Statement_Sequence => Make_Handled_Sequence_Of_Statements (Loc, Stmts)); if Present (Var_Case) then return New_List (Var_Case, Jump_Block); else return New_List (Jump_Block); end if; end Process_Component_List_For_Finalize; -- Local variables Bod_Stmts : List_Id := No_List; Finalizer_Decls : List_Id := No_List; Rec_Def : Node_Id; -- Start of processing for Build_Finalize_Statements begin Finalizer_Decls := New_List; Build_Object_Declarations (Finalizer_Data, Finalizer_Decls, Loc); if Nkind (Typ_Def) = N_Derived_Type_Definition then Rec_Def := Record_Extension_Part (Typ_Def); else Rec_Def := Typ_Def; end if; -- Create a finalization sequence for all record components if Present (Component_List (Rec_Def)) then Bod_Stmts := Process_Component_List_For_Finalize (Component_List (Rec_Def)); end if; -- A derived record type must finalize all inherited components. This -- action poses the following problem: -- procedure Deep_Finalize (Obj : in out Parent_Typ) is -- begin -- Finalize (Obj); -- ... -- procedure Deep_Finalize (Obj : in out Derived_Typ) is -- begin -- Deep_Finalize (Obj._parent); -- ... -- Finalize (Obj); -- ... -- Finalizing the derived type will invoke Finalize of the parent and -- then that of the derived type. This is undesirable because both -- routines may modify shared components. Only the Finalize of the -- derived type should be invoked. -- To prevent this double adjustment of shared components, -- Deep_Finalize uses a flag to control the invocation of Finalize: -- procedure Deep_Finalize -- (Obj : in out Some_Type; -- Flag : Boolean := True) -- is -- begin -- if Flag then -- Finalize (Obj); -- end if; -- ... -- When Deep_Finalize is invoked for field _parent, a value of False -- is provided for the flag: -- Deep_Finalize (Obj._parent, False); if Is_Tagged_Type (Typ) and then Is_Derived_Type (Typ) then declare Par_Typ : constant Entity_Id := Parent_Field_Type (Typ); Call : Node_Id; Fin_Stmt : Node_Id; begin if Needs_Finalization (Par_Typ) then Call := Make_Final_Call (Obj_Ref => Make_Selected_Component (Loc, Prefix => Make_Identifier (Loc, Name_V), Selector_Name => Make_Identifier (Loc, Name_uParent)), Typ => Par_Typ, Skip_Self => True); -- Generate: -- begin -- Deep_Finalize (V._parent, False); -- exception -- when Id : others => -- if not Raised then -- Raised := True; -- Save_Occurrence (E, -- Get_Current_Excep.all.all); -- end if; -- end; if Present (Call) then Fin_Stmt := Call; if Exceptions_OK then Fin_Stmt := Make_Block_Statement (Loc, Handled_Statement_Sequence => Make_Handled_Sequence_Of_Statements (Loc, Statements => New_List (Fin_Stmt), Exception_Handlers => New_List ( Build_Exception_Handler (Finalizer_Data)))); end if; -- The intended component finalization order is -- 1) POC components of extension -- 2) _Parent component -- 3) non-POC components of extension. -- -- With this "finalize the parent part in the middle" -- ordering, we can avoid the need for making two -- calls to the parent's subprogram in the way that -- is necessary for Init_Procs. This does have the -- peculiar (but legal) consequence that the parent's -- non-POC components are finalized before the -- non-POC extension components. This violates the -- usual "finalize in reverse declaration order" -- principle, but that's ok (see RM 7.6.1(9)). -- -- Last_POC_Call should be non-empty if the extension -- has at least one POC. Interactions with variant -- parts are incorrectly ignored. if Present (Last_POC_Call) then Insert_After (Last_POC_Call, Fin_Stmt); else -- At this point, we could look for the common case -- where there are no POC components anywhere in -- sight (inherited or not) and, in that common case, -- call Append_To instead of Prepend_To. That would -- result in finalizing the parent part after, rather -- than before, the extension components. That might -- be more intuitive (as discussed in preceding -- comment), but it is not required. Prepend_To (Bod_Stmts, Fin_Stmt); end if; end if; end if; end; end if; -- Finalize the object. This action must be performed first before -- all components have been finalized. if Is_Controlled (Typ) and then not Is_Local then declare Fin_Stmt : Node_Id; Proc : Entity_Id; begin Proc := Find_Optional_Prim_Op (Typ, Name_Finalize); -- Generate: -- if F then -- begin -- Finalize (V); -- exception -- when others => -- if not Raised then -- Raised := True; -- Save_Occurrence (E, -- Get_Current_Excep.all.all); -- end if; -- end; -- end if; if Present (Proc) then Fin_Stmt := Make_Procedure_Call_Statement (Loc, Name => New_Occurrence_Of (Proc, Loc), Parameter_Associations => New_List ( Make_Identifier (Loc, Name_V))); if Exceptions_OK then Fin_Stmt := Make_Block_Statement (Loc, Handled_Statement_Sequence => Make_Handled_Sequence_Of_Statements (Loc, Statements => New_List (Fin_Stmt), Exception_Handlers => New_List ( Build_Exception_Handler (Finalizer_Data)))); end if; Prepend_To (Bod_Stmts, Make_If_Statement (Loc, Condition => Make_Identifier (Loc, Name_F), Then_Statements => New_List (Fin_Stmt))); end if; end; end if; -- At this point either all finalization statements have been -- generated or the type is not controlled. if No (Bod_Stmts) then return New_List (Make_Null_Statement (Loc)); -- Generate: -- declare -- Abort : constant Boolean := Triggered_By_Abort; -- -- Abort : constant Boolean := False; -- no abort -- E : Exception_Occurrence; -- Raised : Boolean := False; -- begin -- -- if Raised and then not Abort then -- Raise_From_Controlled_Operation (E); -- end if; -- end; else if Exceptions_OK then Append_To (Bod_Stmts, Build_Raise_Statement (Finalizer_Data)); end if; return New_List ( Make_Block_Statement (Loc, Declarations => Finalizer_Decls, Handled_Statement_Sequence => Make_Handled_Sequence_Of_Statements (Loc, Bod_Stmts))); end if; end Build_Finalize_Statements; ----------------------- -- Parent_Field_Type -- ----------------------- function Parent_Field_Type (Typ : Entity_Id) return Entity_Id is Field : Entity_Id; begin Field := First_Entity (Typ); while Present (Field) loop if Chars (Field) = Name_uParent then return Etype (Field); end if; Next_Entity (Field); end loop; -- A derived tagged type should always have a parent field raise Program_Error; end Parent_Field_Type; --------------------------- -- Preprocess_Components -- --------------------------- procedure Preprocess_Components (Comps : Node_Id; Num_Comps : out Nat; Has_POC : out Boolean) is Decl : Node_Id; Id : Entity_Id; Typ : Entity_Id; begin Num_Comps := 0; Has_POC := False; Decl := First_Non_Pragma (Component_Items (Comps)); while Present (Decl) loop Id := Defining_Identifier (Decl); Typ := Etype (Id); -- Skip field _parent if Chars (Id) /= Name_uParent and then Needs_Finalization (Typ) then Num_Comps := Num_Comps + 1; if Has_Access_Constraint (Id) and then No (Expression (Decl)) then Has_POC := True; end if; end if; Next_Non_Pragma (Decl); end loop; end Preprocess_Components; -- Start of processing for Make_Deep_Record_Body begin case Prim is when Address_Case => return Make_Finalize_Address_Stmts (Typ); when Adjust_Case => return Build_Adjust_Statements (Typ); when Finalize_Case => return Build_Finalize_Statements (Typ); when Initialize_Case => declare Loc : constant Source_Ptr := Sloc (Typ); begin if Is_Controlled (Typ) then return New_List ( Make_Procedure_Call_Statement (Loc, Name => New_Occurrence_Of (Find_Prim_Op (Typ, Name_Of (Prim)), Loc), Parameter_Associations => New_List ( Make_Identifier (Loc, Name_V)))); else return Empty_List; end if; end; end case; end Make_Deep_Record_Body; ---------------------- -- Make_Final_Call -- ---------------------- function Make_Final_Call (Obj_Ref : Node_Id; Typ : Entity_Id; Skip_Self : Boolean := False) return Node_Id is Loc : constant Source_Ptr := Sloc (Obj_Ref); Atyp : Entity_Id; Prot_Typ : Entity_Id := Empty; Fin_Id : Entity_Id := Empty; Ref : Node_Id; Utyp : Entity_Id; begin Ref := Obj_Ref; -- Recover the proper type which contains [Deep_]Finalize if Is_Class_Wide_Type (Typ) then Utyp := Root_Type (Typ); Atyp := Utyp; elsif Is_Concurrent_Type (Typ) then Utyp := Corresponding_Record_Type (Typ); Atyp := Empty; Ref := Convert_Concurrent (Ref, Typ); elsif Is_Private_Type (Typ) and then Present (Underlying_Type (Typ)) and then Is_Concurrent_Type (Underlying_Type (Typ)) then Utyp := Corresponding_Record_Type (Underlying_Type (Typ)); Atyp := Typ; Ref := Convert_Concurrent (Ref, Underlying_Type (Typ)); else Utyp := Typ; Atyp := Typ; end if; Utyp := Underlying_Type (Base_Type (Utyp)); Set_Assignment_OK (Ref); -- Deal with untagged derivation of private views. If the parent type -- is a protected type, Deep_Finalize is found on the corresponding -- record of the ancestor. if Is_Untagged_Derivation (Typ) then if Is_Protected_Type (Typ) then Utyp := Corresponding_Record_Type (Root_Type (Base_Type (Typ))); else Utyp := Underlying_Type (Root_Type (Base_Type (Typ))); if Is_Protected_Type (Utyp) then Utyp := Corresponding_Record_Type (Utyp); end if; end if; Ref := Unchecked_Convert_To (Utyp, Ref); Set_Assignment_OK (Ref); end if; -- Deal with derived private types which do not inherit primitives from -- their parents. In this case, [Deep_]Finalize can be found in the full -- view of the parent type. if Present (Utyp) and then Is_Tagged_Type (Utyp) and then Is_Derived_Type (Utyp) and then Is_Empty_Elmt_List (Primitive_Operations (Utyp)) and then Is_Private_Type (Etype (Utyp)) and then Present (Full_View (Etype (Utyp))) then Utyp := Full_View (Etype (Utyp)); Ref := Unchecked_Convert_To (Utyp, Ref); Set_Assignment_OK (Ref); end if; -- When dealing with the completion of a private type, use the base type -- instead. if Present (Utyp) and then Utyp /= Base_Type (Utyp) then pragma Assert (Present (Atyp) and then Is_Private_Type (Atyp)); Utyp := Base_Type (Utyp); Ref := Unchecked_Convert_To (Utyp, Ref); Set_Assignment_OK (Ref); end if; -- Detect if Typ is a protected type or an expanded protected type and -- store the relevant type within Prot_Typ for later processing. if Is_Protected_Type (Typ) then Prot_Typ := Typ; elsif Ekind (Typ) = E_Record_Type and then Present (Corresponding_Concurrent_Type (Typ)) and then Is_Protected_Type (Corresponding_Concurrent_Type (Typ)) then Prot_Typ := Corresponding_Concurrent_Type (Typ); end if; -- The underlying type may not be present due to a missing full view. In -- this case freezing did not take place and there is no [Deep_]Finalize -- primitive to call. if No (Utyp) then return Empty; elsif Skip_Self then if Has_Controlled_Component (Utyp) then if Is_Tagged_Type (Utyp) then Fin_Id := Find_Optional_Prim_Op (Utyp, TSS_Deep_Finalize); else Fin_Id := TSS (Utyp, TSS_Deep_Finalize); end if; end if; -- Class-wide types, interfaces and types with controlled components elsif Is_Class_Wide_Type (Typ) or else Is_Interface (Typ) or else Has_Controlled_Component (Utyp) then if Is_Tagged_Type (Utyp) then Fin_Id := Find_Optional_Prim_Op (Utyp, TSS_Deep_Finalize); else Fin_Id := TSS (Utyp, TSS_Deep_Finalize); end if; -- Derivations from [Limited_]Controlled elsif Is_Controlled (Utyp) then Fin_Id := Find_Optional_Prim_Op (Utyp, Name_Of (Finalize_Case)); -- Tagged types elsif Is_Tagged_Type (Utyp) then Fin_Id := Find_Optional_Prim_Op (Utyp, TSS_Deep_Finalize); -- Protected types: these also require finalization even though they -- are not marked controlled explicitly. elsif Present (Prot_Typ) then -- Protected objects do not need to be finalized on restricted -- runtimes. if Restricted_Profile then return Empty; -- ??? Only handle the simple case for now. Will not support a record -- or array containing protected objects. elsif Is_Simple_Protected_Type (Prot_Typ) then Fin_Id := RTE (RE_Finalize_Protection); else raise Program_Error; end if; else raise Program_Error; end if; if Present (Fin_Id) then -- When finalizing a class-wide object, do not convert to the root -- type in order to produce a dispatching call. if Is_Class_Wide_Type (Typ) then null; -- Ensure that a finalization routine is at least decorated in order -- to inspect the object parameter. elsif Analyzed (Fin_Id) or else Ekind (Fin_Id) = E_Procedure then -- In certain cases, such as the creation of Stream_Read, the -- visible entity of the type is its full view. Since Stream_Read -- will have to create an object of type Typ, the local object -- will be finalzed by the scope finalizer generated later on. The -- object parameter of Deep_Finalize will always use the private -- view of the type. To avoid such a clash between a private and a -- full view, perform an unchecked conversion of the object -- reference to the private view. declare Formal_Typ : constant Entity_Id := Etype (First_Formal (Fin_Id)); begin if Is_Private_Type (Formal_Typ) and then Present (Full_View (Formal_Typ)) and then Full_View (Formal_Typ) = Utyp then Ref := Unchecked_Convert_To (Formal_Typ, Ref); end if; end; -- If the object is unanalyzed, set its expected type for use in -- Convert_View in case an additional conversion is needed. if No (Etype (Ref)) and then Nkind (Ref) /= N_Unchecked_Type_Conversion then Set_Etype (Ref, Typ); end if; Ref := Convert_View (Fin_Id, Ref); end if; return Make_Call (Loc, Proc_Id => Fin_Id, Param => Ref, Skip_Self => Skip_Self); else pragma Assert (Serious_Errors_Detected > 0 or else not Has_Controlled_Component (Utyp)); return Empty; end if; end Make_Final_Call; -------------------------------- -- Make_Finalize_Address_Body -- -------------------------------- procedure Make_Finalize_Address_Body (Typ : Entity_Id) is Is_Task : constant Boolean := Ekind (Typ) = E_Record_Type and then Is_Concurrent_Record_Type (Typ) and then Ekind (Corresponding_Concurrent_Type (Typ)) = E_Task_Type; Loc : constant Source_Ptr := Sloc (Typ); Proc_Id : Entity_Id; Stmts : List_Id; begin -- The corresponding records of task types are not controlled by design. -- For the sake of completeness, create an empty Finalize_Address to be -- used in task class-wide allocations. if Is_Task then null; -- Nothing to do if the type is not controlled or it already has a -- TSS entry for Finalize_Address. Skip class-wide subtypes which do not -- come from source. These are usually generated for completeness and -- do not need the Finalize_Address primitive. elsif not Needs_Finalization (Typ) or else Present (TSS (Typ, TSS_Finalize_Address)) or else (Is_Class_Wide_Type (Typ) and then Ekind (Root_Type (Typ)) = E_Record_Subtype and then not Comes_From_Source (Root_Type (Typ))) then return; end if; -- Do not generate Finalize_Address routine for CodePeer if CodePeer_Mode then return; end if; Proc_Id := Make_Defining_Identifier (Loc, Make_TSS_Name (Typ, TSS_Finalize_Address)); -- Generate: -- procedure FD (V : System.Address) is -- begin -- null; -- for tasks -- declare -- for all other types -- type Pnn is access all Typ; -- for Pnn'Storage_Size use 0; -- begin -- [Deep_]Finalize (Pnn (V).all); -- end; -- end TypFD; if Is_Task then Stmts := New_List (Make_Null_Statement (Loc)); else Stmts := Make_Finalize_Address_Stmts (Typ); end if; Discard_Node ( Make_Subprogram_Body (Loc, Specification => Make_Procedure_Specification (Loc, Defining_Unit_Name => Proc_Id, Parameter_Specifications => New_List ( Make_Parameter_Specification (Loc, Defining_Identifier => Make_Defining_Identifier (Loc, Name_V), Parameter_Type => New_Occurrence_Of (RTE (RE_Address), Loc)))), Declarations => No_List, Handled_Statement_Sequence => Make_Handled_Sequence_Of_Statements (Loc, Statements => Stmts))); Set_TSS (Typ, Proc_Id); end Make_Finalize_Address_Body; --------------------------------- -- Make_Finalize_Address_Stmts -- --------------------------------- function Make_Finalize_Address_Stmts (Typ : Entity_Id) return List_Id is Loc : constant Source_Ptr := Sloc (Typ); Decls : List_Id; Desig_Typ : Entity_Id; Fin_Block : Node_Id; Fin_Call : Node_Id; Obj_Expr : Node_Id; Ptr_Typ : Entity_Id; begin if Is_Array_Type (Typ) then if Is_Constrained (First_Subtype (Typ)) then Desig_Typ := First_Subtype (Typ); else Desig_Typ := Base_Type (Typ); end if; -- Class-wide types of constrained root types elsif Is_Class_Wide_Type (Typ) and then Has_Discriminants (Root_Type (Typ)) and then not Is_Empty_Elmt_List (Discriminant_Constraint (Root_Type (Typ))) then declare Parent_Typ : Entity_Id; Parent_Utyp : Entity_Id; begin -- Climb the parent type chain looking for a non-constrained type Parent_Typ := Root_Type (Typ); while Parent_Typ /= Etype (Parent_Typ) and then Has_Discriminants (Parent_Typ) and then not Is_Empty_Elmt_List (Discriminant_Constraint (Parent_Typ)) loop Parent_Typ := Etype (Parent_Typ); end loop; -- Handle views created for tagged types with unknown -- discriminants. if Is_Underlying_Record_View (Parent_Typ) then Parent_Typ := Underlying_Record_View (Parent_Typ); end if; Parent_Utyp := Underlying_Type (Parent_Typ); -- Handle views created for a synchronized private extension with -- known, non-defaulted discriminants. In that case, parent_typ -- will be the private extension, as it is the first "non -- -constrained" type in the parent chain. Unfortunately, the -- underlying type, being a protected or task type, is not the -- "real" type needing finalization. Rather, the "corresponding -- record type" should be the designated type here. In fact, TSS -- finalizer generation is specifically skipped for the nominal -- class-wide type of (the full view of) a concurrent type (see -- exp_ch7.Expand_Freeze_Class_Wide_Type). If we don't designate -- the underlying record (Tprot_typeVC), we will end up trying to -- dispatch to prot_typeVDF from an incorrectly designated -- Tprot_typeC, which is, of course, not actually a member of -- prot_typeV'Class, and thus incompatible. if Ekind (Parent_Utyp) in Concurrent_Kind and then Present (Corresponding_Record_Type (Parent_Utyp)) then Parent_Utyp := Corresponding_Record_Type (Parent_Utyp); end if; Desig_Typ := Class_Wide_Type (Parent_Utyp); end; -- General case else Desig_Typ := Typ; end if; -- Generate: -- type Ptr_Typ is access all Typ; -- for Ptr_Typ'Storage_Size use 0; Ptr_Typ := Make_Temporary (Loc, 'P'); Decls := New_List ( Make_Full_Type_Declaration (Loc, Defining_Identifier => Ptr_Typ, Type_Definition => Make_Access_To_Object_Definition (Loc, All_Present => True, Subtype_Indication => New_Occurrence_Of (Desig_Typ, Loc))), Make_Attribute_Definition_Clause (Loc, Name => New_Occurrence_Of (Ptr_Typ, Loc), Chars => Name_Storage_Size, Expression => Make_Integer_Literal (Loc, 0))); Obj_Expr := Make_Identifier (Loc, Name_V); -- Unconstrained arrays require special processing in order to retrieve -- the elements. To achieve this, we have to skip the dope vector which -- lays in front of the elements and then use a thin pointer to perform -- the address-to-access conversion. if Is_Array_Type (Typ) and then not Is_Constrained (First_Subtype (Typ)) then declare Dope_Id : Entity_Id; begin -- Ensure that Ptr_Typ is a thin pointer; generate: -- for Ptr_Typ'Size use System.Address'Size; Append_To (Decls, Make_Attribute_Definition_Clause (Loc, Name => New_Occurrence_Of (Ptr_Typ, Loc), Chars => Name_Size, Expression => Make_Integer_Literal (Loc, System_Address_Size))); -- Generate: -- Dnn : constant Storage_Offset := -- Desig_Typ'Descriptor_Size / Storage_Unit; Dope_Id := Make_Temporary (Loc, 'D'); Append_To (Decls, Make_Object_Declaration (Loc, Defining_Identifier => Dope_Id, Constant_Present => True, Object_Definition => New_Occurrence_Of (RTE (RE_Storage_Offset), Loc), Expression => Make_Op_Divide (Loc, Left_Opnd => Make_Attribute_Reference (Loc, Prefix => New_Occurrence_Of (Desig_Typ, Loc), Attribute_Name => Name_Descriptor_Size), Right_Opnd => Make_Integer_Literal (Loc, System_Storage_Unit)))); -- Shift the address from the start of the dope vector to the -- start of the elements: -- -- V + Dnn -- -- Note that this is done through a wrapper routine since RTSfind -- cannot retrieve operations with string names of the form "+". Obj_Expr := Make_Function_Call (Loc, Name => New_Occurrence_Of (RTE (RE_Add_Offset_To_Address), Loc), Parameter_Associations => New_List ( Obj_Expr, New_Occurrence_Of (Dope_Id, Loc))); end; end if; Fin_Call := Make_Final_Call ( Obj_Ref => Make_Explicit_Dereference (Loc, Prefix => Unchecked_Convert_To (Ptr_Typ, Obj_Expr)), Typ => Desig_Typ); if Present (Fin_Call) then Fin_Block := Make_Block_Statement (Loc, Declarations => Decls, Handled_Statement_Sequence => Make_Handled_Sequence_Of_Statements (Loc, Statements => New_List (Fin_Call))); -- Otherwise previous errors or a missing full view may prevent the -- proper freezing of the designated type. If this is the case, there -- is no [Deep_]Finalize primitive to call. else Fin_Block := Make_Null_Statement (Loc); end if; return New_List (Fin_Block); end Make_Finalize_Address_Stmts; ------------------------------------- -- Make_Handler_For_Ctrl_Operation -- ------------------------------------- -- Generate: -- when E : others => -- Raise_From_Controlled_Operation (E); -- or: -- when others => -- raise Program_Error [finalize raised exception]; -- depending on whether Raise_From_Controlled_Operation is available function Make_Handler_For_Ctrl_Operation (Loc : Source_Ptr) return Node_Id is E_Occ : Entity_Id; -- Choice parameter (for the first case above) Raise_Node : Node_Id; -- Procedure call or raise statement begin -- Standard run-time: add choice parameter E and pass it to -- Raise_From_Controlled_Operation so that the original exception -- name and message can be recorded in the exception message for -- Program_Error. if RTE_Available (RE_Raise_From_Controlled_Operation) then E_Occ := Make_Defining_Identifier (Loc, Name_E); Raise_Node := Make_Procedure_Call_Statement (Loc, Name => New_Occurrence_Of (RTE (RE_Raise_From_Controlled_Operation), Loc), Parameter_Associations => New_List ( New_Occurrence_Of (E_Occ, Loc))); -- Restricted run-time: exception messages are not supported else E_Occ := Empty; Raise_Node := Make_Raise_Program_Error (Loc, Reason => PE_Finalize_Raised_Exception); end if; return Make_Implicit_Exception_Handler (Loc, Exception_Choices => New_List (Make_Others_Choice (Loc)), Choice_Parameter => E_Occ, Statements => New_List (Raise_Node)); end Make_Handler_For_Ctrl_Operation; -------------------- -- Make_Init_Call -- -------------------- function Make_Init_Call (Obj_Ref : Node_Id; Typ : Entity_Id) return Node_Id is Loc : constant Source_Ptr := Sloc (Obj_Ref); Is_Conc : Boolean; Proc : Entity_Id; Ref : Node_Id; Utyp : Entity_Id; begin Ref := Obj_Ref; -- Deal with the type and object reference. Depending on the context, an -- object reference may need several conversions. if Is_Concurrent_Type (Typ) then Is_Conc := True; Utyp := Corresponding_Record_Type (Typ); Ref := Convert_Concurrent (Ref, Typ); elsif Is_Private_Type (Typ) and then Present (Full_View (Typ)) and then Is_Concurrent_Type (Underlying_Type (Typ)) then Is_Conc := True; Utyp := Corresponding_Record_Type (Underlying_Type (Typ)); Ref := Convert_Concurrent (Ref, Underlying_Type (Typ)); else Is_Conc := False; Utyp := Typ; end if; Utyp := Underlying_Type (Base_Type (Utyp)); Set_Assignment_OK (Ref); -- Deal with untagged derivation of private views if Is_Untagged_Derivation (Typ) and then not Is_Conc then Utyp := Underlying_Type (Root_Type (Base_Type (Typ))); Ref := Unchecked_Convert_To (Utyp, Ref); -- The following is to prevent problems with UC see 1.156 RH ??? Set_Assignment_OK (Ref); end if; -- If the underlying_type is a subtype, then we are dealing with the -- completion of a private type. We need to access the base type and -- generate a conversion to it. if Present (Utyp) and then Utyp /= Base_Type (Utyp) then pragma Assert (Is_Private_Type (Typ)); Utyp := Base_Type (Utyp); Ref := Unchecked_Convert_To (Utyp, Ref); end if; -- The underlying type may not be present due to a missing full view. -- In this case freezing did not take place and there is no suitable -- [Deep_]Initialize primitive to call. -- If Typ is protected then no additional processing is needed either. if No (Utyp) or else Is_Protected_Type (Typ) then return Empty; end if; -- Select the appropriate version of initialize if Has_Controlled_Component (Utyp) then Proc := TSS (Utyp, Deep_Name_Of (Initialize_Case)); elsif Is_Mutably_Tagged_Type (Utyp) then Proc := Find_Prim_Op (Etype (Utyp), Name_Of (Initialize_Case)); Check_Visibly_Controlled (Initialize_Case, Etype (Typ), Proc, Ref); else Proc := Find_Prim_Op (Utyp, Name_Of (Initialize_Case)); Check_Visibly_Controlled (Initialize_Case, Typ, Proc, Ref); end if; -- If initialization procedure for an array of controlled objects is -- trivial, do not generate a useless call to it. -- The initialization procedure may be missing altogether in the case -- of a derived container whose components have trivial initialization. if No (Proc) or else (Is_Array_Type (Utyp) and then Is_Trivial_Subprogram (Proc)) or else (not Comes_From_Source (Proc) and then Present (Alias (Proc)) and then Is_Trivial_Subprogram (Alias (Proc))) then return Empty; end if; -- The object reference may need another conversion depending on the -- type of the formal and that of the actual. Ref := Convert_View (Proc, Ref); -- Generate: -- [Deep_]Initialize (Ref); return Make_Procedure_Call_Statement (Loc, Name => New_Occurrence_Of (Proc, Loc), Parameter_Associations => New_List (Ref)); end Make_Init_Call; ------------------------------ -- Make_Local_Deep_Finalize -- ------------------------------ function Make_Local_Deep_Finalize (Typ : Entity_Id; Nam : Entity_Id) return Node_Id is Loc : constant Source_Ptr := Sloc (Typ); Formals : List_Id; begin Formals := New_List ( -- V : in out Typ Make_Parameter_Specification (Loc, Defining_Identifier => Make_Defining_Identifier (Loc, Name_V), In_Present => True, Out_Present => True, Parameter_Type => New_Occurrence_Of (Typ, Loc)), -- F : Boolean := True Make_Parameter_Specification (Loc, Defining_Identifier => Make_Defining_Identifier (Loc, Name_F), Parameter_Type => New_Occurrence_Of (Standard_Boolean, Loc), Expression => New_Occurrence_Of (Standard_True, Loc))); -- Add the necessary number of counters to represent the initialization -- state of an object. return Make_Subprogram_Body (Loc, Specification => Make_Procedure_Specification (Loc, Defining_Unit_Name => Nam, Parameter_Specifications => Formals), Declarations => No_List, Handled_Statement_Sequence => Make_Handled_Sequence_Of_Statements (Loc, Statements => Make_Deep_Record_Body (Finalize_Case, Typ, True))); end Make_Local_Deep_Finalize; ---------------------------------- -- Make_Master_Node_Declaration -- ---------------------------------- function Make_Master_Node_Declaration (Loc : Source_Ptr; Master_Node : Entity_Id; Obj : Entity_Id) return Node_Id is begin Set_Finalization_Master_Node (Obj, Master_Node); return Make_Object_Declaration (Loc, Defining_Identifier => Master_Node, Aliased_Present => True, Object_Definition => New_Occurrence_Of (RTE (RE_Master_Node), Loc)); end Make_Master_Node_Declaration; ---------------------------------------- -- Make_Suppress_Object_Finalize_Call -- ---------------------------------------- function Make_Suppress_Object_Finalize_Call (Loc : Source_Ptr; Obj : Entity_Id) return Node_Id is Obj_Decl : constant Node_Id := Declaration_Node (Obj); Master_Node_Decl : Node_Id; Master_Node_Id : Entity_Id; begin -- Create the declaration of the Master_Node for the object and -- insert it before the declaration of the object itself. if Present (Finalization_Master_Node (Obj)) then Master_Node_Id := Finalization_Master_Node (Obj); else Master_Node_Id := Make_Temporary (Loc, 'N'); Master_Node_Decl := Make_Master_Node_Declaration (Loc, Master_Node_Id, Obj); Insert_Before_And_Analyze (Obj_Decl, Master_Node_Decl); -- Generate the attachment of the object to the Master_Node Attach_Object_To_Master_Node (Obj_Decl, Master_Node_Id); -- Mark the object to avoid double finalization Set_Is_Ignored_For_Finalization (Obj); end if; return Make_Procedure_Call_Statement (Loc, Name => New_Occurrence_Of (RTE (RE_Suppress_Object_Finalize_At_End), Loc), Parameter_Associations => New_List ( New_Occurrence_Of (Master_Node_Id, Loc))); end Make_Suppress_Object_Finalize_Call; -------------------------- -- Make_Transient_Block -- -------------------------- function Make_Transient_Block (Loc : Source_Ptr; Action : Node_Id; Par : Node_Id) return Node_Id is function Manages_Sec_Stack (Id : Entity_Id) return Boolean; -- Determine whether scoping entity Id manages the secondary stack function Within_Loop_Statement (N : Node_Id) return Boolean; -- Return True when N appears within a loop and no block is containing N ----------------------- -- Manages_Sec_Stack -- ----------------------- function Manages_Sec_Stack (Id : Entity_Id) return Boolean is begin case Ekind (Id) is -- An exception handler with a choice parameter utilizes a dummy -- block to provide a declarative region. Such a block should not -- be considered because it never manifests in the tree and can -- never release the secondary stack. when E_Block => return Uses_Sec_Stack (Id) and then not Is_Exception_Handler (Id); when E_Entry | E_Entry_Family | E_Function | E_Procedure => return Uses_Sec_Stack (Id); when others => return False; end case; end Manages_Sec_Stack; --------------------------- -- Within_Loop_Statement -- --------------------------- function Within_Loop_Statement (N : Node_Id) return Boolean is Par : Node_Id := Parent (N); begin while Nkind (Par) not in N_Handled_Sequence_Of_Statements | N_Loop_Statement | N_Package_Specification | N_Proper_Body loop pragma Assert (Present (Par)); Par := Parent (Par); end loop; return Nkind (Par) = N_Loop_Statement; end Within_Loop_Statement; -- Local variables Decls : constant List_Id := New_List; Instrs : constant List_Id := New_List (Action); Trans_Id : constant Entity_Id := Current_Scope; Block : Node_Id; Insert : Node_Id; Scop : Entity_Id; -- Start of processing for Make_Transient_Block begin -- Even though the transient block is tasked with managing the secondary -- stack, the block may forgo this functionality depending on how the -- secondary stack is managed by enclosing scopes. if Manages_Sec_Stack (Trans_Id) then -- Determine whether an enclosing scope already manages the secondary -- stack. Scop := Scope (Trans_Id); while Present (Scop) loop -- It should not be possible to reach Standard without hitting one -- of the other cases first unless Standard was manually pushed. if Scop = Standard_Standard then exit; -- The transient block is within a function which returns on the -- secondary stack. Take a conservative approach and assume that -- the value on the secondary stack is part of the result. Note -- that it is not possible to detect this dependency without flow -- analysis which the compiler does not have. Letting the object -- live longer than the transient block will not leak any memory -- because the caller will reclaim the total storage used by the -- function. elsif Ekind (Scop) = E_Function and then Sec_Stack_Needed_For_Return (Scop) then Set_Uses_Sec_Stack (Trans_Id, False); exit; -- The transient block must manage the secondary stack when the -- block appears within a loop in order to reclaim the memory at -- each iteration. elsif Ekind (Scop) = E_Loop then exit; -- Ditto when the block appears without a block that does not -- manage the secondary stack and is located within a loop. elsif Ekind (Scop) = E_Block and then not Manages_Sec_Stack (Scop) and then Present (Block_Node (Scop)) and then Within_Loop_Statement (Block_Node (Scop)) then exit; -- The transient block does not need to manage the secondary stack -- when there is an enclosing construct which already does that. -- This optimization saves on SS_Mark and SS_Release calls but may -- allow objects to live a little longer than required. -- The transient block must manage the secondary stack when switch -- -gnatd.s (strict management) is in effect. elsif Manages_Sec_Stack (Scop) and then not Debug_Flag_Dot_S then Set_Uses_Sec_Stack (Trans_Id, False); exit; -- Prevent the search from going too far because transient blocks -- are bounded by packages and subprogram scopes. elsif Ekind (Scop) in E_Entry | E_Entry_Family | E_Function | E_Package | E_Procedure | E_Subprogram_Body then exit; end if; Scop := Scope (Scop); end loop; end if; -- Create the transient block. Set the parent now since the block itself -- is not part of the tree. The current scope is the E_Block entity that -- has been pushed by Establish_Transient_Scope. pragma Assert (Ekind (Trans_Id) = E_Block); Block := Make_Block_Statement (Loc, Identifier => New_Occurrence_Of (Trans_Id, Loc), Declarations => Decls, Handled_Statement_Sequence => Make_Handled_Sequence_Of_Statements (Loc, Statements => Instrs), Has_Created_Identifier => True); Set_Parent (Block, Par); -- Insert actions stuck in the transient scopes as well as all freezing -- nodes needed by those actions. Do not insert cleanup actions here, -- they will be transferred to the newly created block. Insert_Actions_In_Scope_Around (Action, Clean => False, Manage_SS => False); Insert := Prev (Action); if Present (Insert) then Freeze_All (First_Entity (Trans_Id), Insert); end if; -- Transfer cleanup actions to the newly created block declare Cleanup_Actions : List_Id renames Scope_Stack.Table (Scope_Stack.Last). Actions_To_Be_Wrapped (Cleanup); begin Set_Cleanup_Actions (Block, Cleanup_Actions); Cleanup_Actions := No_List; end; -- When the transient scope was established, we pushed the entry for the -- transient scope onto the scope stack, so that the scope was active -- for the installation of finalizable entities etc. Now we must remove -- this entry, since we have constructed a proper block. Pop_Scope; return Block; end Make_Transient_Block; ------------------------ -- Node_To_Be_Wrapped -- ------------------------ function Node_To_Be_Wrapped return Node_Id is begin return Scope_Stack.Table (Scope_Stack.Last).Node_To_Be_Wrapped; end Node_To_Be_Wrapped; ---------------------------- -- Store_Actions_In_Scope -- ---------------------------- procedure Store_Actions_In_Scope (AK : Scope_Action_Kind; L : List_Id) is SE : Scope_Stack_Entry renames Scope_Stack.Table (Scope_Stack.Last); Actions : List_Id renames SE.Actions_To_Be_Wrapped (AK); begin if Is_Empty_List (Actions) then Actions := L; if Is_List_Member (SE.Node_To_Be_Wrapped) then Set_Parent (L, Parent (SE.Node_To_Be_Wrapped)); else Set_Parent (L, SE.Node_To_Be_Wrapped); end if; Analyze_List (L); elsif AK = Before then Insert_List_After_And_Analyze (Last (Actions), L); else Insert_List_Before_And_Analyze (First (Actions), L); end if; end Store_Actions_In_Scope; ---------------------------------- -- Store_After_Actions_In_Scope -- ---------------------------------- procedure Store_After_Actions_In_Scope (L : List_Id) is begin Store_Actions_In_Scope (After, L); end Store_After_Actions_In_Scope; ----------------------------------- -- Store_Before_Actions_In_Scope -- ----------------------------------- procedure Store_Before_Actions_In_Scope (L : List_Id) is begin Store_Actions_In_Scope (Before, L); end Store_Before_Actions_In_Scope; ----------------------------------- -- Store_Cleanup_Actions_In_Scope -- ----------------------------------- procedure Store_Cleanup_Actions_In_Scope (L : List_Id) is begin Store_Actions_In_Scope (Cleanup, L); end Store_Cleanup_Actions_In_Scope; ------------------ -- Unnest_Block -- ------------------ procedure Unnest_Block (Decl : Node_Id) is Loc : constant Source_Ptr := Sloc (Decl); Ent : Entity_Id; Local_Body : Node_Id; Local_Call : Node_Id; Local_Proc : Entity_Id; Local_Scop : Entity_Id; begin Local_Scop := Entity (Identifier (Decl)); Ent := First_Entity (Local_Scop); Local_Proc := Make_Temporary (Loc, 'P'); Local_Body := Make_Subprogram_Body (Loc, Specification => Make_Procedure_Specification (Loc, Defining_Unit_Name => Local_Proc), Declarations => Declarations (Decl), Handled_Statement_Sequence => Handled_Statement_Sequence (Decl)); -- Handlers in the block may contain nested subprograms that require -- unnesting. Check_Unnesting_In_Handlers (Local_Body); Rewrite (Decl, Local_Body); Analyze (Decl); Set_Has_Nested_Subprogram (Local_Proc); Local_Call := Make_Procedure_Call_Statement (Loc, Name => New_Occurrence_Of (Local_Proc, Loc)); Insert_After (Decl, Local_Call); Analyze (Local_Call); -- The new subprogram has the same scope as the original block Set_Scope (Local_Proc, Scope (Local_Scop)); -- And the entity list of the new procedure is that of the block Set_First_Entity (Local_Proc, Ent); -- Reset the scopes of all the entities to the new procedure while Present (Ent) loop Set_Scope (Ent, Local_Proc); Next_Entity (Ent); end loop; end Unnest_Block; ------------------------- -- Unnest_If_Statement -- ------------------------- procedure Unnest_If_Statement (If_Stmt : Node_Id) is procedure Check_Stmts_For_Subp_Unnesting (Stmts : in out List_Id); -- A list of statements (that may be a list associated with a then, -- elsif, or else part of an if-statement) is traversed at the top -- level to determine whether it contains a subprogram body, and if so, -- the statements will be replaced with a new procedure body containing -- the statements followed by a call to the procedure. The individual -- statements may also be blocks, loops, or other if statements that -- themselves may require contain nested subprograms needing unnesting. procedure Check_Stmts_For_Subp_Unnesting (Stmts : in out List_Id) is Subp_Found : Boolean := False; begin if Is_Empty_List (Stmts) then return; end if; declare Stmt : Node_Id := First (Stmts); begin while Present (Stmt) loop if Nkind (Stmt) = N_Subprogram_Body then Subp_Found := True; exit; end if; Next (Stmt); end loop; end; -- The statements themselves may be blocks, loops, etc. that in turn -- contain nested subprograms requiring an unnesting transformation. -- We perform this traversal after looking for subprogram bodies, to -- avoid considering procedures created for one of those statements -- (such as a block rewritten as a procedure) as a nested subprogram -- of the statement list (which could result in an unneeded wrapper -- procedure). Check_Unnesting_In_Decls_Or_Stmts (Stmts); -- If there was a top-level subprogram body in the statement list, -- then perform an unnesting transformation on the list by replacing -- the statements with a wrapper procedure body containing the -- original statements followed by a call to that procedure. if Subp_Found then Unnest_Statement_List (Stmts); end if; end Check_Stmts_For_Subp_Unnesting; -- Local variables Then_Stmts : List_Id := Then_Statements (If_Stmt); Else_Stmts : List_Id := Else_Statements (If_Stmt); -- Start of processing for Unnest_If_Statement begin Check_Stmts_For_Subp_Unnesting (Then_Stmts); Set_Then_Statements (If_Stmt, Then_Stmts); if not Is_Empty_List (Elsif_Parts (If_Stmt)) then declare Elsif_Part : Node_Id := First (Elsif_Parts (If_Stmt)); Elsif_Stmts : List_Id; begin while Present (Elsif_Part) loop Elsif_Stmts := Then_Statements (Elsif_Part); Check_Stmts_For_Subp_Unnesting (Elsif_Stmts); Set_Then_Statements (Elsif_Part, Elsif_Stmts); Next (Elsif_Part); end loop; end; end if; Check_Stmts_For_Subp_Unnesting (Else_Stmts); Set_Else_Statements (If_Stmt, Else_Stmts); end Unnest_If_Statement; ----------------- -- Unnest_Loop -- ----------------- procedure Unnest_Loop (Loop_Stmt : Node_Id) is procedure Fixup_Inner_Scopes (Loop_Or_Block : Node_Id); -- This procedure fixes the scope for 2 identified cases of incorrect -- scope information. -- -- 1) The loops created by the compiler for array aggregates can have -- nested finalization procedure when the type of the array components -- needs finalization. It has the following form: -- for J4b in 10 .. 12 loop -- declare -- procedure __finalizer; -- begin -- procedure __finalizer is -- ... -- end; -- ... -- obj (J4b) := ...; -- When the compiler creates the N_Block_Statement, it sets its scope to -- the outer scope (the one containing the loop). -- The Unnest_Loop procedure moves the N_Loop_Statement inside a new -- procedure and correctly sets the scopes for both the new procedure -- and the loop entity. The inner block scope is not modified and this -- leaves the Tree in an incoherent state (i.e. the inner procedure must -- have its enclosing procedure in its scope ancestries). -- 2) The second case happens when an object declaration is created -- within a loop used to initialize the 'others' components of an -- aggregate that is nested within a transient scope. When the transient -- scope is removed, the object scope is set to the outer scope. For -- example: -- package pack -- ... -- L98s : for J90s in 2 .. 19 loop -- B101s : declare -- R92s : aliased some_type; -- ... -- The loop L98s was initially wrapped in a transient scope B72s and -- R92s was nested within it. Then the transient scope is removed and -- the scope of R92s is set to 'pack'. And finally, when the unnester -- moves the loop body in a new procedure, R92s's scope is still left -- unchanged. -- This procedure finds the two previous patterns and fixes the scope -- information. -- Another (better) fix would be to have the block scope set to be the -- loop entity earlier (when the block is created or when the loop gets -- an actual entity set). But unfortunately this proved harder to -- implement ??? procedure Fixup_Inner_Scopes (Loop_Or_Block : Node_Id) is Stmt : Node_Id; Loop_Or_Block_Ent : Entity_Id; Ent_To_Fix : Entity_Id; Decl : Node_Id := Empty; begin pragma Assert (Nkind (Loop_Or_Block) in N_Loop_Statement | N_Block_Statement); Loop_Or_Block_Ent := Entity (Identifier (Loop_Or_Block)); if Nkind (Loop_Or_Block) = N_Loop_Statement then Stmt := First (Statements (Loop_Or_Block)); else -- N_Block_Statement Stmt := First (Statements (Handled_Statement_Sequence (Loop_Or_Block))); Decl := First (Declarations (Loop_Or_Block)); end if; -- Fix scopes for any object declaration found in the block while Present (Decl) loop if Nkind (Decl) = N_Object_Declaration then Ent_To_Fix := Defining_Identifier (Decl); Set_Scope (Ent_To_Fix, Loop_Or_Block_Ent); end if; Next (Decl); end loop; while Present (Stmt) loop if Nkind (Stmt) = N_Block_Statement and then Is_Abort_Block (Stmt) then Ent_To_Fix := Entity (Identifier (Stmt)); Set_Scope (Ent_To_Fix, Loop_Or_Block_Ent); elsif Nkind (Stmt) in N_Block_Statement | N_Loop_Statement then Fixup_Inner_Scopes (Stmt); end if; Next (Stmt); end loop; end Fixup_Inner_Scopes; Loc : constant Source_Ptr := Sloc (Loop_Stmt); Ent : Entity_Id; Local_Body : Node_Id; Local_Call : Node_Id; Loop_Ent : Entity_Id; Local_Proc : Entity_Id; Loop_Copy : constant Node_Id := Relocate_Node (Loop_Stmt); begin Loop_Ent := Entity (Identifier (Loop_Stmt)); Ent := First_Entity (Loop_Ent); Local_Proc := Make_Temporary (Loc, 'P'); Local_Body := Make_Subprogram_Body (Loc, Specification => Make_Procedure_Specification (Loc, Defining_Unit_Name => Local_Proc), Declarations => Empty_List, Handled_Statement_Sequence => Make_Handled_Sequence_Of_Statements (Loc, Statements => New_List (Loop_Copy))); Rewrite (Loop_Stmt, Local_Body); Analyze (Loop_Stmt); Set_Has_Nested_Subprogram (Local_Proc); Local_Call := Make_Procedure_Call_Statement (Loc, Name => New_Occurrence_Of (Local_Proc, Loc)); Insert_After (Loop_Stmt, Local_Call); Analyze (Local_Call); -- New procedure has the same scope as the original loop, and the scope -- of the loop is the new procedure. Set_Scope (Local_Proc, Scope (Loop_Ent)); Set_Scope (Loop_Ent, Local_Proc); Fixup_Inner_Scopes (Loop_Copy); -- The entity list of the new procedure is that of the loop Set_First_Entity (Local_Proc, Ent); -- Note that the entities associated with the loop don't need to have -- their Scope fields reset, since they're still associated with the -- same loop entity that now belongs to the copied loop statement. end Unnest_Loop; --------------------------- -- Unnest_Statement_List -- --------------------------- procedure Unnest_Statement_List (Stmts : in out List_Id) is Loc : constant Source_Ptr := Sloc (First (Stmts)); Local_Body : Node_Id; Local_Call : Node_Id; Local_Proc : Entity_Id; New_Stmts : constant List_Id := Empty_List; begin Local_Proc := Make_Temporary (Loc, 'P'); Local_Body := Make_Subprogram_Body (Loc, Specification => Make_Procedure_Specification (Loc, Defining_Unit_Name => Local_Proc), Declarations => Empty_List, Handled_Statement_Sequence => Make_Handled_Sequence_Of_Statements (Loc, Statements => Stmts)); Append_To (New_Stmts, Local_Body); Analyze (Local_Body); Set_Has_Nested_Subprogram (Local_Proc); Local_Call := Make_Procedure_Call_Statement (Loc, Name => New_Occurrence_Of (Local_Proc, Loc)); Append_To (New_Stmts, Local_Call); Analyze (Local_Call); -- Traverse the statements, and for any that are declarations or -- subprogram bodies that have entities, set the Scope of those -- entities to the new procedure's Entity_Id. declare Stmt : Node_Id := First (Stmts); begin while Present (Stmt) loop case Nkind (Stmt) is when N_Declaration | N_Renaming_Declaration => Set_Scope (Defining_Identifier (Stmt), Local_Proc); when N_Subprogram_Body => Set_Scope (Defining_Unit_Name (Specification (Stmt)), Local_Proc); when others => null; end case; Next (Stmt); end loop; end; Stmts := New_Stmts; end Unnest_Statement_List; -------------------------------- -- Wrap_Transient_Declaration -- -------------------------------- -- If a transient scope has been established during the processing of the -- Expression of an Object_Declaration, it is not possible to wrap the -- declaration into a transient block as usual case, otherwise the object -- would be itself declared in the wrong scope. Therefore, all entities (if -- any) defined in the transient block are moved to the proper enclosing -- scope. Furthermore, if they are controlled variables they are finalized -- right after the declaration. The finalization list of the transient -- scope is defined as a renaming of the enclosing one so during their -- initialization they will be attached to the proper finalization list. -- For instance, the following declaration : -- X : Typ := F (G (A), G (B)); -- (where G(A) and G(B) return controlled values, expanded as _v1 and _v2) -- is expanded into : -- X : Typ := [ complex Expression-Action ]; -- [Deep_]Finalize (_v1); -- [Deep_]Finalize (_v2); procedure Wrap_Transient_Declaration (N : Node_Id) is Curr_S : Entity_Id; Encl_S : Entity_Id; begin Curr_S := Current_Scope; Encl_S := Scope (Curr_S); -- Insert all actions including cleanup generated while analyzing or -- expanding the transient context back into the tree. Manage the -- secondary stack when the object declaration appears in a library -- level package [body]. Insert_Actions_In_Scope_Around (N => N, Clean => True, Manage_SS => Uses_Sec_Stack (Curr_S) and then Nkind (N) = N_Object_Declaration and then Ekind (Encl_S) in E_Package | E_Package_Body and then Is_Library_Level_Entity (Encl_S)); Pop_Scope; -- Relocate local entities declared within the transient scope to the -- enclosing scope. This action sets their Is_Public flag accordingly. Transfer_Entities (Curr_S, Encl_S); -- Mark the enclosing dynamic scope to ensure that the secondary stack -- is properly released upon exiting the said scope. if Uses_Sec_Stack (Curr_S) then Curr_S := Enclosing_Dynamic_Scope (Curr_S); -- Do not mark a function that returns on the secondary stack as the -- reclamation is done by the caller. if Ekind (Curr_S) = E_Function and then Needs_Secondary_Stack (Etype (Curr_S)) then null; -- Otherwise mark the enclosing dynamic scope else Set_Uses_Sec_Stack (Curr_S); Check_Restriction (No_Secondary_Stack, N); end if; end if; end Wrap_Transient_Declaration; ------------------------------- -- Wrap_Transient_Expression -- ------------------------------- procedure Wrap_Transient_Expression (N : Node_Id) is Loc : constant Source_Ptr := Sloc (N); Expr : Node_Id := Relocate_Node (N); Temp : constant Entity_Id := Make_Temporary (Loc, 'E', N); Typ : constant Entity_Id := Etype (N); begin -- Generate: -- Temp : Typ; -- declare -- M : constant Mark_Id := SS_Mark; -- procedure Finalizer is ... (See Build_Finalizer) -- begin -- Temp := ; -- general case -- Temp := (if then True else False); -- boolean case -- at end -- Finalizer; -- end; -- A special case is made for Boolean expressions so that the back end -- knows to generate a conditional branch instruction, if running with -- -fpreserve-control-flow. This ensures that a control-flow change -- signaling the decision outcome occurs before the cleanup actions. if Opt.Suppress_Control_Flow_Optimizations and then Is_Boolean_Type (Typ) then Expr := Make_If_Expression (Loc, Expressions => New_List ( Expr, New_Occurrence_Of (Standard_True, Loc), New_Occurrence_Of (Standard_False, Loc))); end if; Insert_Actions (N, New_List ( Make_Object_Declaration (Loc, Defining_Identifier => Temp, Object_Definition => New_Occurrence_Of (Typ, Loc)), Make_Transient_Block (Loc, Action => Make_Assignment_Statement (Loc, Name => New_Occurrence_Of (Temp, Loc), Expression => Expr), Par => Parent (N)))); if Debug_Generated_Code then Set_Debug_Info_Needed (Temp); end if; Rewrite (N, New_Occurrence_Of (Temp, Loc)); Analyze_And_Resolve (N, Typ); end Wrap_Transient_Expression; ------------------------------ -- Wrap_Transient_Statement -- ------------------------------ procedure Wrap_Transient_Statement (N : Node_Id) is Loc : constant Source_Ptr := Sloc (N); New_Stmt : constant Node_Id := Relocate_Node (N); begin -- Generate: -- declare -- M : constant Mark_Id := SS_Mark; -- procedure Finalizer is ... (See Build_Finalizer) -- -- begin -- ; -- -- at end -- Finalizer; -- end; Rewrite (N, Make_Transient_Block (Loc, Action => New_Stmt, Par => Parent (N))); -- With the scope stack back to normal, we can call analyze on the -- resulting block. At this point, the transient scope is being -- treated like a perfectly normal scope, so there is nothing -- special about it. -- Note: Wrap_Transient_Statement is called with the node already -- analyzed (i.e. Analyzed (N) is True). This is important, since -- otherwise we would get a recursive processing of the node when -- we do this Analyze call. Analyze (N); end Wrap_Transient_Statement; end Exp_Ch7;