------------------------------------------------------------------------------ -- -- -- GNAT COMPILER COMPONENTS -- -- -- -- B C H E C K -- -- -- -- B o d y -- -- -- -- $Revision$ -- -- -- Copyright (C) 1992-2001 Free Software Foundation, Inc. -- -- -- -- GNAT is free software; you can redistribute it and/or modify it under -- -- terms of the GNU General Public License as published by the Free Soft- -- -- ware Foundation; either version 2, or (at your option) any later ver- -- -- sion. GNAT is distributed in the hope that it will be useful, but WITH- -- -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -- -- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -- -- for more details. You should have received a copy of the GNU General -- -- Public License distributed with GNAT; see file COPYING. If not, write -- -- to the Free Software Foundation, 59 Temple Place - Suite 330, Boston, -- -- MA 02111-1307, USA. -- -- -- -- GNAT was originally developed by the GNAT team at New York University. -- -- It is now maintained by Ada Core Technologies Inc (http://www.gnat.com). -- -- -- ------------------------------------------------------------------------------ with ALI; use ALI; with ALI.Util; use ALI.Util; with Binderr; use Binderr; with Butil; use Butil; with Casing; use Casing; with Debug; use Debug; with Fname; use Fname; with Namet; use Namet; with Opt; use Opt; with Osint; with Output; use Output; with Rident; use Rident; with Types; use Types; package body Bcheck is -- Local subprograms -- The following checking subprograms make up the parts -- of the configuration consistency check. procedure Check_Consistent_Dynamic_Elaboration_Checking; procedure Check_Consistent_Floating_Point_Format; procedure Check_Consistent_Locking_Policy; procedure Check_Consistent_Normalize_Scalars; procedure Check_Consistent_Queuing_Policy; procedure Check_Consistent_Zero_Cost_Exception_Handling; procedure Check_Partition_Restrictions; procedure Consistency_Error_Msg (Msg : String); -- Produce an error or a warning message, depending on whether -- an inconsistent configuration is permitted or not. ------------------------------------ -- Check_Consistent_Configuration -- ------------------------------------ procedure Check_Configuration_Consistency is begin if Float_Format_Specified /= ' ' then Check_Consistent_Floating_Point_Format; end if; if Queuing_Policy_Specified /= ' ' then Check_Consistent_Queuing_Policy; end if; if Locking_Policy_Specified /= ' ' then Check_Consistent_Locking_Policy; end if; if Zero_Cost_Exceptions_Specified then Check_Consistent_Zero_Cost_Exception_Handling; end if; Check_Consistent_Normalize_Scalars; Check_Consistent_Dynamic_Elaboration_Checking; Check_Partition_Restrictions; end Check_Configuration_Consistency; --------------------------------------------------- -- Check_Consistent_Dynamic_Elaboration_Checking -- --------------------------------------------------- -- The rule here is that if a unit has dynamic elaboration checks, -- then any unit it withs must meeting one of the following criteria: -- 1. There is a pragma Elaborate_All for the with'ed unit -- 2. The with'ed unit was compiled with dynamic elaboration checks -- 3. The with'ed unit has pragma Preelaborate or Pure -- 4. It is an internal GNAT unit (including children of GNAT) procedure Check_Consistent_Dynamic_Elaboration_Checking is begin if Dynamic_Elaboration_Checks_Specified then for U in First_Unit_Entry .. Units.Last loop declare UR : Unit_Record renames Units.Table (U); begin if UR.Dynamic_Elab then for W in UR.First_With .. UR.Last_With loop declare WR : With_Record renames Withs.Table (W); begin if Get_Name_Table_Info (WR.Uname) /= 0 then declare WU : Unit_Record renames Units.Table (Unit_Id (Get_Name_Table_Info (WR.Uname))); begin -- Case 1. Elaborate_All for with'ed unit if WR.Elaborate_All then null; -- Case 2. With'ed unit has dynamic elab checks elsif WU.Dynamic_Elab then null; -- Case 3. With'ed unit is Preelaborate or Pure elsif WU.Preelab or WU.Pure then null; -- Case 4. With'ed unit is internal file elsif Is_Internal_File_Name (WU.Sfile) then null; -- Issue warning, not one of the safe cases else Error_Msg_Name_1 := UR.Sfile; Error_Msg ("?% has dynamic elaboration checks " & "and with's"); Error_Msg_Name_1 := WU.Sfile; Error_Msg ("? % which has static elaboration " & "checks"); Warnings_Detected := Warnings_Detected - 1; end if; end; end if; end; end loop; end if; end; end loop; end if; end Check_Consistent_Dynamic_Elaboration_Checking; -------------------------------------------- -- Check_Consistent_Floating_Point_Format -- -------------------------------------------- -- The rule is that all files must be compiled with the same setting -- for the floating-point format. procedure Check_Consistent_Floating_Point_Format is begin -- First search for a unit specifying a floating-point format and then -- check all remaining units against it. Find_Format : for A1 in ALIs.First .. ALIs.Last loop if ALIs.Table (A1).Float_Format /= ' ' then Check_Format : declare Format : constant Character := ALIs.Table (A1).Float_Format; begin for A2 in A1 + 1 .. ALIs.Last loop if ALIs.Table (A2).Float_Format /= Format then Error_Msg_Name_1 := ALIs.Table (A1).Sfile; Error_Msg_Name_2 := ALIs.Table (A2).Sfile; Consistency_Error_Msg ("% and % compiled with different " & "floating-point representations"); exit Find_Format; end if; end loop; end Check_Format; exit Find_Format; end if; end loop Find_Format; end Check_Consistent_Floating_Point_Format; ------------------------------------- -- Check_Consistent_Locking_Policy -- ------------------------------------- -- The rule is that all files for which the locking policy is -- significant must be compiled with the same setting. procedure Check_Consistent_Locking_Policy is begin -- First search for a unit specifying a policy and then -- check all remaining units against it. Find_Policy : for A1 in ALIs.First .. ALIs.Last loop if ALIs.Table (A1).Locking_Policy /= ' ' then Check_Policy : declare Policy : constant Character := ALIs.Table (A1).Locking_Policy; begin for A2 in A1 + 1 .. ALIs.Last loop if ALIs.Table (A2).Locking_Policy /= ' ' and ALIs.Table (A2).Locking_Policy /= Policy then Error_Msg_Name_1 := ALIs.Table (A1).Sfile; Error_Msg_Name_2 := ALIs.Table (A2).Sfile; Consistency_Error_Msg ("% and % compiled with different locking policies"); exit Find_Policy; end if; end loop; end Check_Policy; exit Find_Policy; end if; end loop Find_Policy; end Check_Consistent_Locking_Policy; ---------------------------------------- -- Check_Consistent_Normalize_Scalars -- ---------------------------------------- -- The rule is that if any unit is compiled with Normalized_Scalars, -- then all other units in the partition must also be compiled with -- Normalized_Scalars in effect. -- There is some issue as to whether this consistency check is -- desirable, it is certainly required at the moment by the RM. -- We should keep a watch on the ARG and HRG deliberations here. -- GNAT no longer depends on this consistency (it used to do so, -- but that has been corrected in the latest version, since the -- Initialize_Scalars pragma does not require consistency. procedure Check_Consistent_Normalize_Scalars is begin if Normalize_Scalars_Specified and No_Normalize_Scalars_Specified then Consistency_Error_Msg ("some but not all files compiled with Normalize_Scalars"); Write_Eol; Write_Str ("files compiled with Normalize_Scalars"); Write_Eol; for A1 in ALIs.First .. ALIs.Last loop if ALIs.Table (A1).Normalize_Scalars then Write_Str (" "); Write_Name (ALIs.Table (A1).Sfile); Write_Eol; end if; end loop; Write_Eol; Write_Str ("files compiled without Normalize_Scalars"); Write_Eol; for A1 in ALIs.First .. ALIs.Last loop if not ALIs.Table (A1).Normalize_Scalars then Write_Str (" "); Write_Name (ALIs.Table (A1).Sfile); Write_Eol; end if; end loop; end if; end Check_Consistent_Normalize_Scalars; ------------------------------------- -- Check_Consistent_Queuing_Policy -- ------------------------------------- -- The rule is that all files for which the queuing policy is -- significant must be compiled with the same setting. procedure Check_Consistent_Queuing_Policy is begin -- First search for a unit specifying a policy and then -- check all remaining units against it. Find_Policy : for A1 in ALIs.First .. ALIs.Last loop if ALIs.Table (A1).Queuing_Policy /= ' ' then Check_Policy : declare Policy : constant Character := ALIs.Table (A1).Queuing_Policy; begin for A2 in A1 + 1 .. ALIs.Last loop if ALIs.Table (A2).Queuing_Policy /= ' ' and then ALIs.Table (A2).Queuing_Policy /= Policy then Error_Msg_Name_1 := ALIs.Table (A1).Sfile; Error_Msg_Name_2 := ALIs.Table (A2).Sfile; Consistency_Error_Msg ("% and % compiled with different queuing policies"); exit Find_Policy; end if; end loop; end Check_Policy; exit Find_Policy; end if; end loop Find_Policy; end Check_Consistent_Queuing_Policy; --------------------------------------------------- -- Check_Consistent_Zero_Cost_Exception_Handling -- --------------------------------------------------- -- Check consistent zero cost exception handling. The rule is that -- all units must have the same exception handling mechanism. procedure Check_Consistent_Zero_Cost_Exception_Handling is begin Check_Mechanism : for A1 in ALIs.First + 1 .. ALIs.Last loop if ALIs.Table (A1).Zero_Cost_Exceptions /= ALIs.Table (ALIs.First).Zero_Cost_Exceptions then Error_Msg_Name_1 := ALIs.Table (A1).Sfile; Error_Msg_Name_2 := ALIs.Table (ALIs.First).Sfile; Consistency_Error_Msg ("% and % compiled with different " & "exception handling mechanisms"); end if; end loop Check_Mechanism; end Check_Consistent_Zero_Cost_Exception_Handling; ---------------------------------- -- Check_Partition_Restrictions -- ---------------------------------- -- The rule is that if a restriction is specified in any unit, -- then all units must obey the restriction. The check applies -- only to restrictions which require partition wide consistency, -- and not to internal units. -- The check is done in two steps. First for every restriction -- a unit specifying that restriction is found, if any. -- Second, all units are verified against the specified restrictions. procedure Check_Partition_Restrictions is R : array (Partition_Restrictions) of ALI_Id := (others => No_ALI_Id); -- Record the first unit specifying each partition restriction V : array (Partition_Restrictions) of ALI_Id := (others => No_ALI_Id); -- Record the last unit violating each partition restriction procedure List_Applicable_Restrictions; -- Output a list of restrictions that may be applied to the partition, -- without causing bind errors. ---------------------------------- -- List_Applicable_Restrictions -- ---------------------------------- procedure List_Applicable_Restrictions is Additional_Restrictions_Listed : Boolean := False; begin -- List any restrictions which were not violated and not specified for J in Partition_Restrictions loop if V (J) = No_ALI_Id and R (J) = No_ALI_Id then if not Additional_Restrictions_Listed then Write_Str ("The following additional restrictions may be" & " applied to this partition:"); Write_Eol; Additional_Restrictions_Listed := True; end if; Write_Str ("pragma Restrictions ("); declare S : constant String := Restriction_Id'Image (J); begin Name_Len := S'Length; Name_Buffer (1 .. Name_Len) := S; end; Set_Casing (Mixed_Case); Write_Str (Name_Buffer (1 .. Name_Len)); Write_Str (");"); Write_Eol; end if; end loop; end List_Applicable_Restrictions; -- Start of processing for Check_Partition_Restrictions begin Find_Restrictions : for A in ALIs.First .. ALIs.Last loop for J in Partition_Restrictions loop if R (J) = No_ALI_Id and ALIs.Table (A).Restrictions (J) = 'r' then R (J) := A; end if; end loop; end loop Find_Restrictions; Find_Violations : for A in ALIs.First .. ALIs.Last loop for J in Partition_Restrictions loop if ALIs.Table (A).Restrictions (J) = 'v' and then not Is_Internal_File_Name (ALIs.Table (A).Sfile) then -- A violation of a restriction was found, so check whether -- that restriction was actually in effect. If so, give an -- error message. -- Note that all such violations found are reported. V (J) := A; if R (J) /= No_ALI_Id then Report_Violated_Restriction : declare M1 : constant String := "% has Restriction ("; S : constant String := Restriction_Id'Image (J); M2 : String (1 .. M1'Length + S'Length + 1); begin Name_Buffer (1 .. S'Length) := S; Name_Len := S'Length; Set_Casing (Units.Table (ALIs.Table (R (J)).First_Unit).Icasing); M2 (M1'Range) := M1; M2 (M1'Length + 1 .. M2'Last - 1) := Name_Buffer (1 .. S'Length); M2 (M2'Last) := ')'; Error_Msg_Name_1 := ALIs.Table (R (J)).Sfile; Consistency_Error_Msg (M2); Error_Msg_Name_1 := ALIs.Table (A).Sfile; Consistency_Error_Msg ("but file % violates this restriction"); end Report_Violated_Restriction; end if; end if; end loop; end loop Find_Violations; if Debug_Flag_R then List_Applicable_Restrictions; end if; end Check_Partition_Restrictions; ----------------------- -- Check_Consistency -- ----------------------- procedure Check_Consistency is Src : Source_Id; -- Source file Id for this Sdep entry begin -- First, we go through the source table to see if there are any cases -- in which we should go after source files and compute checksums of -- the source files. We need to do this for any file for which we have -- mismatching time stamps and (so far) matching checksums. for S in Source.First .. Source.Last loop -- If all time stamps for a file match, then there is nothing to -- do, since we will not be checking checksums in that case anyway if Source.Table (S).All_Timestamps_Match then null; -- If we did not find the source file, then we can't compute its -- checksum anyway. Note that when we have a time stamp mismatch, -- we try to find the source file unconditionally (i.e. if -- Check_Source_Files is False). elsif not Source.Table (S).Source_Found then null; -- If we already have non-matching or missing checksums, then no -- need to try going after source file, since we won't trust the -- checksums in any case. elsif not Source.Table (S).All_Checksums_Match then null; -- Now we have the case where we have time stamp mismatches, and -- the source file is around, but so far all checksums match. This -- is the case where we need to compute the checksum from the source -- file, since otherwise we would ignore the time stamp mismatches, -- and that is wrong if the checksum of the source does not agree -- with the checksums in the ALI files. elsif Check_Source_Files then if not Checksums_Match (Source.Table (S).Checksum, Get_File_Checksum (Source.Table (S).Sfile)) then Source.Table (S).All_Checksums_Match := False; end if; end if; end loop; -- Loop through ALI files ALIs_Loop : for A in ALIs.First .. ALIs.Last loop -- Loop through Sdep entries in one ALI file Sdep_Loop : for D in ALIs.Table (A).First_Sdep .. ALIs.Table (A).Last_Sdep loop Src := Source_Id (Get_Name_Table_Info (Sdep.Table (D).Sfile)); -- If the time stamps match, or all checksums match, then we -- are OK, otherwise we have a definite error. if Sdep.Table (D).Stamp /= Source.Table (Src).Stamp and then not Source.Table (Src).All_Checksums_Match then Error_Msg_Name_1 := ALIs.Table (A).Sfile; Error_Msg_Name_2 := Sdep.Table (D).Sfile; -- Two styles of message, depending on whether or not -- the updated file is the one that must be recompiled if Error_Msg_Name_1 = Error_Msg_Name_2 then if Tolerate_Consistency_Errors then Error_Msg ("?% has been modified and should be recompiled"); else Error_Msg ("% has been modified and must be recompiled"); end if; else if Tolerate_Consistency_Errors then Error_Msg ("?% should be recompiled (% has been modified)"); else Error_Msg ("% must be recompiled (% has been modified)"); end if; end if; if (not Tolerate_Consistency_Errors) and Verbose_Mode then declare Msg : constant String := "file % has time stamp "; Buf : String (1 .. Msg'Length + Time_Stamp_Length); begin Buf (1 .. Msg'Length) := Msg; Buf (Msg'Length + 1 .. Buf'Length) := String (Source.Table (Src).Stamp); Error_Msg_Name_1 := ALIs.Table (A).Sfile; Error_Msg (Buf); Buf (Msg'Length + 1 .. Buf'Length) := String (Sdep.Table (D).Stamp); Error_Msg_Name_1 := Sdep.Table (D).Sfile; Error_Msg (Buf); end; end if; -- Exit from the loop through Sdep entries once we find one -- that does not match. exit Sdep_Loop; end if; end loop Sdep_Loop; end loop ALIs_Loop; end Check_Consistency; ------------------------------- -- Check_Duplicated_Subunits -- ------------------------------- procedure Check_Duplicated_Subunits is begin for J in Sdep.First .. Sdep.Last loop if Sdep.Table (J).Subunit_Name /= No_Name then Get_Decoded_Name_String (Sdep.Table (J).Subunit_Name); Name_Len := Name_Len + 2; Name_Buffer (Name_Len - 1) := '%'; -- See if there is a body or spec with the same name for K in Boolean loop if K then Name_Buffer (Name_Len) := 'b'; else Name_Buffer (Name_Len) := 's'; end if; declare Info : constant Int := Get_Name_Table_Info (Name_Find); begin if Info /= 0 then Set_Standard_Error; Write_Str ("error: subunit """); Write_Name_Decoded (Sdep.Table (J).Subunit_Name); Write_Str (""" in file """); Write_Name_Decoded (Sdep.Table (J).Sfile); Write_Char ('"'); Write_Eol; Write_Str (" has same name as unit """); Write_Unit_Name (Units.Table (Unit_Id (Info)).Uname); Write_Str (""" found in file """); Write_Name_Decoded (Units.Table (Unit_Id (Info)).Sfile); Write_Char ('"'); Write_Eol; Write_Str (" this is not allowed within a single " & "partition (RM 10.2(19))"); Write_Eol; Osint.Exit_Program (Osint.E_Fatal); end if; end; end loop; end if; end loop; end Check_Duplicated_Subunits; -------------------- -- Check_Versions -- -------------------- procedure Check_Versions is VL : constant Natural := ALIs.Table (ALIs.First).Ver_Len; begin for A in ALIs.First .. ALIs.Last loop if ALIs.Table (A).Ver_Len /= VL or else ALIs.Table (A).Ver (1 .. VL) /= ALIs.Table (ALIs.First).Ver (1 .. VL) then Error_Msg_Name_1 := ALIs.Table (A).Sfile; Error_Msg_Name_2 := ALIs.Table (ALIs.First).Sfile; Consistency_Error_Msg ("% and % compiled with different GNAT versions"); end if; end loop; end Check_Versions; --------------------------- -- Consistency_Error_Msg -- --------------------------- procedure Consistency_Error_Msg (Msg : String) is begin if Tolerate_Consistency_Errors then -- If consistency errors are tolerated, -- output the message as a warning. declare Warning_Msg : String (1 .. Msg'Length + 1); begin Warning_Msg (1) := '?'; Warning_Msg (2 .. Warning_Msg'Last) := Msg; Error_Msg (Warning_Msg); end; -- Otherwise the consistency error is a true error else Error_Msg (Msg); end if; end Consistency_Error_Msg; end Bcheck;