This file contains information about GCC releases which has been generated automatically from the online release notes. This file covers releases of GCC (and the former EGCS project) since EGCS 1.0, on the line of development that led to GCC 3; for information on GCC 2.8.1 and older releases of GCC 2, see ONEWS. ====================================================================== http://gcc.gnu.org/gcc-2.95/gcc-2.95.2.html GCC 2.95.2 October 27, 1999 The GNU project and the GCC developers are pleased to announce the release of GCC version 2.95.2. GCC used to stand for the GNU C Compiler, but since the compiler supports several other languages aside from C, it now stands for the GNU Compiler Collection. This is a minor release to address several bugs in the GCC version 2.95.1 release. The -fstrict-aliasing is not enabled by default for GCC 2.95.2. While the optimizations performed by -fstrict-aliasing are valid according to the C and C++ standards, the optimization have caused some problems, particularly with old non-conforming code. The GCC developers are experimenting with ways to warn users about code which violates the C/C++ standards, but those warnings are not ready for widespread use at this time. Rather than wait for those warnings the GCC developers have chosen to disable -fstrict-aliasing by default for the GCC 2.95.2 release. We strongly encourage developers to find and fix code which violates the C/C++ standards as -fstrict-aliasing may be enabled by default in future releases. Use the option -fstrict-aliasing to re-enable these optimizations. * Generic bugfixes and improvements + Fix incorrectly optimized memory reference in global common subexpression elimination (GCSE) optimization pass. + Fix code generation bug in regmove.c in which it could incorrectly change a "const" value. + Fix bug in optimization of conditionals involving volatile memory references. + Avoid over-allocation of stack space for some procedures. + Fixed bug in the compiler which caused incorrect optimization of an obscure series of bit manipulations, shifts and arithmetic. + Fixed register allocator bug which caused teTeX to be mis-compiled on Sparc targets. + Avoid incorrect optimization of degenerate case statements for certain targets such as the ARM. + Fix out of range memory reference in the jump optimizer. + Avoid dereferencing null pointer in fix-header. + Fix test for GCC specific features so that it is possible to bootstrap with gcc-2.6.2 and older versions of GCC. + Fix typo in scheduler which could potentially cause out of range memory accesses. + Avoid incorrect loop reversal which caused incorrect code for certain loops on PowerPC targets. + Avoid incorrect optimization of switch statements on certain targets (for example the ARM). * Platform specific bugfixes and improvements + Work around bug in Sun V5.0 compilers which caused bootstrap comparison failures on Sparc targets. + Fix Sparc backend bug which caused aborts in final.c. + Fix sparc-hal-solaris2* configuration fragments. + Fix bug in sparc block profiling. + Fix obscure code generation bug for the PARISC targets. + Define __STDC_EXT__ for HPUX configurations. + Various POWERPC64 code generation bugfixes. + Fix abort for PPC targets using ELF (ex GNU/Linux). + Fix collect2 problems for AIX targets. + Correct handling of .file directive for PPC targets. + Fix bug in fix_trunc x86 patterns. + Fix x86 port to correctly pop the FP stack for functions that return structures in memory. + Fix minor bug in strlen x86 pattern. + Use stabs debugging instead of dwarf1 for x86-solaris targets. + Fix template repository code to handle leading underscore in mangled names. + Fix weak/weak alias support for OpenBSD. + GNU/Linux for the ARM has C++ compatible include files. * Language & Runtime specific fixes. + Fix handling of constructor attribute in the C front-end which caused problems building the Chill runtime library on some targets. + Fix minor problem merging type qualifiers in the C front-end. + Fix aliasing bug for pointers and references (C/C++). + Fix incorrect "non-constant initializer bug" when -traditional or -fwritable-strings is enabled. + Fix build error for Chill front-end on SunOS. + Do not complain about duplicate instantiations when using -frepo (C++) + Fix array bounds handling in C++ front-end which caused problems with dwarf debugging information in some circumstances. + Fix minor namespace problem. + Fix problem linking java programs. The whole suite has been extensively [1]regression tested and [2]package tested. It should be reliable and suitable for widespread use. The GCC 2.95 release has several new optimizations, new targets, new languages and other new features as compared to EGCS 1.1 or GCC 2.8. See the [3]new features page for a more complete list of new features found in the GCC 2.95 releases. The sources include installation instructions in both HTML and plaintext forms in the install directory in the distribution. However, the most up to date [4]installation instructions and [5]build/test status are on the web pages. We will update those pages as new information becomes available. The GCC developers would like to thank the numerous people that have contributed new features, test results, bugfixes, etc to GCC. This [6]amazing group of volunteers is what makes GCC successful. And finally, we can't in good conscience fail to mention some [7]caveats to using GCC 2.95.2. Download GCC 2.95.2 from the [8]GNU FTP server (ftp://ftp.gnu.org) Download GCC 2.95.2 from the [9]GCC/EGCS FTP server (ftp://gcc.gnu.org) [10]Find a GNU mirror site [11]Find a GCC/EGCS mirror site For additional information about GCC please see the [12]GCC project web server or contact the [13]GCC development mailing list. _________________________________________________________________ [14]The GCC team Last modified 2000-11-10 References 1. http://gcc.gnu.org/gcc-2.95/regress.html 2. http://gcc.gnu.org/gcc-2.95/othertest.html 3. http://gcc.gnu.org/gcc-2.95/features.html 4. http://gcc.gnu.org/install/index.html 5. http://gcc.gnu.org/gcc-2.95/buildstat.html 6. http://gcc.gnu.org/thanks.html 7. http://gcc.gnu.org/gcc-2.95/caveats.html 8. ftp://ftp.gnu.org/pub/gnu/gcc/ 9. ftp://gcc.gnu.org/pub/gcc/releases/index.html 10. http://www.gnu.org/order/ftp.html 11. http://gcc.gnu.org/mirrors.html 12. http://gcc.gnu.org/index.html 13. mailto:gcc@gcc.gnu.org 14. http://gcc.gnu.org/about.html ====================================================================== http://gcc.gnu.org/gcc-2.95/gcc-2.95.1.html GCC 2.95.1 August 19, 1999 The GNU project and the GCC/EGCS developers are pleased to announce the release of GCC version 2.95.1. GCC used to stand for the GNU C Compiler, but since the compiler supports several other languages aside from C, it now stands for the GNU Compiler Collection. This is a minor release to address several bugs in the GCC version 2.95 release. * Generic bugfixes and improvements + Various documentation fixes related to the GCC/EGCS merger. + Fix memory management bug which could lead to spurious aborts, core dumps or random parsing errors in the compiler. + Fix a couple bugs in the dwarf1 and dwarf2 debug record support. + Fix infinite loop in the CSE optimizer. + Avoid undefined behavior in compiler FP emulation code + Fix install problem when prefix is overridden on the make install command. + Fix problem with unwanted installation of assert.h on some systems. + Fix problem with finding the wrong assembler in a single tree build. + Avoid increasing the known alignment of a register that is already known to be a pointer. * Platform specific bugfixes and improvements + Codegen bugfix for prologue/epilogue for cpu32 target. + Fix long long code generation bug for the Coldfire target. + Fix various aborts in the SH compiler. + Fix bugs in libgcc support library for the SH. + Fix alpha ev6 code generation bug. + Fix problems with EXIT_SUCCESS/EXIT_FAILURE redefinitions on AIX platforms. + Fix -fpic code generation bug for rs6000/ppc svr4 targets. + Fix varargs/stdarg code generation bug for rs6000/ppc svr4 targets. + Fix weak symbol handling for rs6000/ppc svr4 targets. + Fix various problems with 64bit code generation for the rs6000/ppc port. + Fix codegen bug which caused tetex to be mis-compiled on the x86 + Fix compiler abort in new cfg code exposed by x86 port. + Fix out of range array reference in code convert flat registers to the x87 stacked FP register file. + Fix minor vxworks configuration bug + Fix return type of bsearch for SunOS 4.x. * Language & Runtime specific fixes. + The G++ signature extension has been deprecated. It will be removed in the next major release of G++. Use of signatures will result in a warning from the compiler. + Several bugs relating to templates and namespaces were fixed. + A bug that caused crashes when combining templates with -g on DWARF1 platforms was fixed. + Pointers-to-members, virtual functions, and multiple inheritance should now work together correctly. + Some code-generation bugs relating to function try blocks were fixed. + G++ is a little bit more lenient with certain archaic constructs than in GCC 2.95. + Fix to prevent shared library version #s from bring truncated to 1 digit + Fix missing std:: in the libstdc++ library. + Fix stream locking problems in libio. + Fix problem in java compiler driver. The whole suite has been extensively [1]regression tested and [2]package tested. It should be reliable and suitable for widespread use. The compiler has several new optimizations, new targets, new languages and other new features. See the [3]new features page for a more complete list of new features found in the GCC 2.95 releases. The sources include installation instructions in both HTML and plaintext forms in the install directory in the distribution. However, the most up to date [4]installation instructions and [5]build/test status are on the web pages. We will update those pages as new information becomes available. The GCC developers would like to thank the numerous people that have contributed new features, test results, bugfixes, etc to GCC. This [6]amazing group of volunteers is what makes GCC successful. And finally, we can't in good conscience fail to mention some [7]caveats to using GCC 2.95.1. Download GCC 2.95.1 from the [8]GNU FTP server (ftp://ftp.gnu.org) Download GCC 2.95.1 from the [9]GCC/EGCS FTP server (ftp://go.cygnus.com) [10]Find a GNU mirror site [11]Find a GCC/EGCS mirror site For additional information about GCC please see the [12]GCC project web server or contact the [13]GCC development mailing list. _________________________________________________________________ [14]The GCC team Last modified 2000-11-10 References 1. http://gcc.gnu.org/gcc-2.95/regress.html 2. http://gcc.gnu.org/gcc-2.95/othertest.html 3. http://gcc.gnu.org/gcc-2.95/features.html 4. http://gcc.gnu.org/install/index.html 5. http://gcc.gnu.org/gcc-2.95/buildstat.html 6. http://gcc.gnu.org/thanks.html 7. http://gcc.gnu.org/gcc-2.95/caveats.html 8. ftp://ftp.gnu.org/pub/gnu/gcc/ 9. ftp://go.cygnus.com/pub/sourceware.cygnus.com/pub/egcs/releases/index.html 10. http://www.gnu.org/order/ftp.html 11. http://gcc.gnu.org/mirrors.html 12. http://gcc.gnu.org/index.html 13. mailto:gcc@gcc.gnu.org 14. http://gcc.gnu.org/about.html ====================================================================== http://gcc.gnu.org/gcc-2.95/gcc-2.95.html GCC 2.95 July 31, 1999 The GNU project and the GCC/EGCS developers are pleased to announce the release of GCC version 2.95. GCC used to stand for the GNU C Compiler, but since the compiler supports several other languages aside from C, it now stands for the GNU Compiler Collection. This is the first release of GCC since the April 1999 GCC/EGCS reunification and includes nearly a year's worth of new development and bugfixes. The whole suite has been extensively [1]regression tested and [2]package tested. It should be reliable and suitable for widespread use. The compiler has several new optimizations, new targets, new languages and other new features. See the [3]new features page for a more complete list of new features found in the GCC 2.95 releases. The sources include installation instructions in both HTML and plaintext forms in the install directory in the distribution. However, the most up to date [4]installation instructions and [5]build/test status are on the web pages. We will update those pages as new information becomes available. The GCC developers would like to thank the numerous people that have contributed new features, test results, bugfixes, etc to GCC. This [6]amazing group of volunteers is what makes GCC successful. And finally, we can't in good conscience fail to mention some [7]caveats to using GCC 2.95. Download GCC 2.95 from the [8]GNU FTP server (ftp://ftp.gnu.org) Download GCC 2.95 from the [9]GCC/EGCS FTP server (ftp://go.cygnus.com) [10]Find a GNU mirror site [11]Find a GCC/EGCS mirror site For additional information about GCC please see the [12]GCC project web server or contact the [13]GCC development mailing list. _________________________________________________________________ [14]The GCC team Last modified 2000-11-10 References 1. http://gcc.gnu.org/gcc-2.95/regress.html 2. http://gcc.gnu.org/gcc-2.95/othertest.html 3. http://gcc.gnu.org/gcc-2.95/features.html 4. http://gcc.gnu.org/install/index.html 5. http://gcc.gnu.org/gcc-2.95/buildstat.html 6. http://gcc.gnu.org/thanks.html 7. http://gcc.gnu.org/gcc-2.95/caveats.html 8. ftp://ftp.gnu.org/pub/gnu/gcc/ 9. ftp://go.cygnus.com/pub/sourceware.cygnus.com/pub/egcs/releases/index.html 10. http://www.gnu.org/order/ftp.html 11. http://gcc.gnu.org/mirrors.html 12. http://gcc.gnu.org/index.html 13. mailto:gcc@gcc.gnu.org 14. http://gcc.gnu.org/about.html ====================================================================== http://gcc.gnu.org/gcc-2.95/features.html GCC 2.95 New Features * General Optimizer Improvements: + [1]Localized register spilling to improve speed and code density especially on small register class machines. + [2]Global CSE using lazy code motion algorithms. + [3]Improved global constant/copy propagation. + [4]Improved control flow graph analysis and manipulation. + [5]Local dead store elimination. + [6]Memory Load hoisting/store sinking in loops. + [7]Type based alias analysis is enabled by default. Note this feature will expose bugs in the Linux kernel. Please refer to the [8]FAQ for additional information on this issue. + Major revamp of GIV detection, combination and simplification to improve loop performance. + Major improvements to register allocation and reloading. * New Languages and Language specific improvements + [9]Many C++ improvements. + [10]Many Fortran improvements. + [11]Java front-end has been integrated. A [12]runtime library is available separately. + [13]ISO C99 support + [14]Chill front-end and runtime has been integrated. + Boehm garbage collector support in libobjc. + More support for various pragmas which appear in vendor include files * New Targets and Target Specific Improvements + [15]Sparc backend rewrite. + -mschedule=8000 will optimize code for PA8000 class processors; -mpa-risc-2-0 will generate code for PA2.0 processors + Various micro-optimizations for the ia32 port. K6 optimizations + Compiler will attempt to align doubles in the stack on the ia32 port + Alpha EV6 support + PowerPC 750 + RS6000/PowerPC: -mcpu=401 was added as an alias for -mcpu=403. -mcpu=e603e was added to do -mcpu=603e and -msoft-float. + c3x, c4x + HyperSparc + SparcLite86x + sh4 + Support for new systems (OpenBSD, FreeBSD, UWIN, Interix, arm-linux) + vxWorks targets include support for vxWorks threads + StrongARM 110 and ARM9 support added. ARM Scheduling parameters rewritten. + Various changes to the MIPS port to avoid assembler macros, which + Various performance improvements to the i960 port. + Major rewrite of ns32k port in turn improves performance * Other significant improvements + [16]Ability to dump cfg information and display it using vcg. + The new faster scheme for fixing vendor header files is enabled by default. + Experimental internationalization support. + multibyte character support + Some compile-time speedups for pathological problems + Better support for complex types * Plus the usual mountain of bugfixes * Core compiler is based on the gcc2 development tree from Sept 30, 1998, so we have all of the [17]features found in GCC 2.8. _________________________________________________________________ [18]The GCC team Last modified 2000-12-04 References 1. http://gcc.gnu.org/news/spill.html 2. http://gcc.gnu.org/news/lcm.html 3. http://gcc.gnu.org/news/cprop.html 4. http://gcc.gnu.org/news/cfg.html 5. http://gcc.gnu.org/news/dse.html 6. http://gcc.gnu.org/news/hoist.html 7. http://gcc.gnu.org/news/alias.html 8. http://gcc.gnu.org/fom_serv/cache/24.html 9. http://gcc.gnu.org/gcc-2.95/c++features.html 10. http://gcc.gnu.org/onlinedocs/g77_news.html 11. http://sources.redhat.com/java/gcj-announce.txt 12. http://gcc.gnu.org/javaannounce.html 13. http://gcc.gnu.org/c99status.html 14. http://gcc.gnu.org/news/chill.html 15. http://gcc.gnu.org/news/sparc.html 16. http://gcc.gnu.org/news/egcs-vcg.html 17. http://gcc.gnu.org/egcs-1.0/features-2.8.html 18. http://gcc.gnu.org/about.html ====================================================================== http://gcc.gnu.org/gcc-2.95/caveats.html GCC 2.95 Caveats * GCC 2.95 will issue an error for invalid asm statements that had been silently accepted by earlier versions of the compiler. This is particularly noticeable when compiling older versions of the Linux kernel (2.0.xx). Please refer to the [1]FAQ for more information on this issue. * GCC 2.95 implements type based alias analysis to disambiguate memory references. Some programs, particularly the Linux kernel violate ANSI/ISO aliasing rules and therefore may not operate correctly when compiled with GCC 2.95. Please refer to the [2]FAQ for more information on this issue. * GCC 2.95 has a known bug in its handling of complex variables for 64bit targets. Instead of silently generating incorrect code, GCC 2.95 will issue a fatal error for situations it can not handle. This primarily affects the Fortran community as Fortran makes more use of complex variables than C or C++. * GCC 2.95 has an integrated libstdc++, but does not have an integrated libg++. Furthermore old libg++ releases will not work with GCC 2.95. You can retrieve a recent copy of libg++ from the [3]GCC ftp server. Note most C++ programs only need libstdc++. * Exception handling may not work with shared libraries, particularly on alphas, hppas, rs6000/powerpc and mips based platforms. Exception handling is known to work on x86 GNU/Linux platforms with shared libraries. * In general, GCC 2.95 is more rigorous about rejecting invalid C++ code or deprecated C++ constructs than G++ 2.7, G++ 2.8, EGCS 1.0, or EGCS 1.1. As a result it may be necessary to fix C++ code before it will compile with GCC 2.95. * G++ is also converting toward the ISO C++ standard; as a result code which was previously valid (and thus accepted by other compilers and older versions of g++) may no longer be accepted. The flag -fpermissive may allow some non-conforming code to compile with GCC 2.95. * GCC 2.95 compiled C++ code is not binary compatible with EGCS 1.1.x, EGCS 1.0.x or GCC 2.8.x. * GCC 2.95 does not have changes from the GCC 2.8 tree that were made between Sept 30, 1998 and April 30, 1999 (the official end of the GCC 2.8 project). Future GCC releases will include all the changes from the defunct GCC 2.8 sources. _________________________________________________________________ [4]The GCC team Last modified 2000-11-10 References 1. http://gcc.gnu.org/faq.html#asmclobber 2. http://gcc.gnu.org/fom_serv/cache/24.html 3. ftp://gcc.gnu.org/pub/gcc/infrastructure/libg++-2.8.1.3.tar.gz 4. http://gcc.gnu.org/about.html ====================================================================== http://gcc.gnu.org/egcs-1.1/egcs-1.1.2.html EGCS 1.1.2 March 15, 1999 We are pleased to announce the release of EGCS 1.1.2. EGCS is a collaborative effort involving several groups of hackers using an open development model to accelerate development and testing of GNU compilers and runtime libraries. EGCS 1.1.2 is a minor update to the EGCS 1.1.1 compiler to fix several serious problems in EGCS 1.1.1. * General improvements and fixes + Fix bug in loop optimizer which caused the SPARC (and potentially other) ports to segfault. + Fix infinite recursion in alias analysis and combiner code. + Fix bug in regclass preferencing. + Fix incorrect loop reversal which caused incorrect code to be generated for several targets. + Fix return value for builtin memcpy. + Reduce compile time for certain loops which exposed quadratic behavior in the loop optimizer. + Fix bug which caused volatile memory to be written multiple times when only one write was needed/desired. + Fix compiler abort in caller-save.c + Fix combiner bug which caused incorrect code generation for certain division by constant operations. + Fix incorrect code generation due to a bug in range check optimizations. + Fix incorrect code generation due to mis-handling of clobbered values in CSE. + Fix compiler abort/segfault due to incorrect register splitting when unrolling loops. + Fix code generation involving autoincremented addresses with ternary operators. + Work around bug in the scheduler which caused qt to be mis-compiled on some platforms. + Fix code generation problems with -fshort-enums. + Tighten security for temporary files. + Improve compile time for codes which make heavy use of overloaded functions. + Fix multiply defined constructor/destructor symbol problems. + Avoid setting bogus RPATH environemnt variable during bootstrap. + Avoid GNU-make dependencies in the texinfo subdir. + Install CPP wrapper script in $(prefix)/bin if --enable-cpp. --enable-cpp= can be used to specify an additional install directory for the cpp wrapper script. + Fix CSE bug which caused incorrect label-label refs to appear on some platforms. + Avoid linking in EH routines from libgcc if they are not needed. + Avoid obscure bug in aliasing code. + Fix bug in weak symbol handling. * Platform-specific improvements and fixes + Fix detection of PPro/PII on Unixware 7. + Fix compiler segfault when building spec99 and other programs for SPARC targets. + Fix code-generation bugs for integer and floating point conditional move instructions on the PPro/PII. + Use fixincludes to fix byteorder problems on i?86-*-sysv. + Fix build failure for the arc port. + Fix floating point format configuration for i?86-gnu port + Fix problems with hppa1.0-hp-hpux10.20 configuration when threads are enabled + Fix coldfire code generation bugs. + Fix "unrecognized insn" problems for Alpha and PPC ports. + Fix h8/300 code generation problem with floating point values in memory. + Fix unrecognized insn problems for the m68k port. + Fix namespace-pollution problem for the x86 port. + Fix problems with old assembler on x86 NeXT systems. + Fix PIC code-generation problems for the SPARC port. + Fix minor bug with LONG_CALLS in PowerPC SVR4 support. + Fix minor ISO namespace violation in Alpha varargs/stdarg support. + Fix incorrect "braf" instruction usage for the SH port. + Fix minor bug in va-sh which prevented its use with -ansi. + Fix problems recognizing and supporting FreeBSD. + Handle OpenBSD systems correctly. + Minor fixincludes fix for Digital UNIX 4.0B. + Fix problems with ctors/dtors in SCO shared libraries. + Abort instead of generating incorrect code for PPro/PII floating point conditional moves. + Avoid multiply defined symbols on Linux/GNU systems using libc-5.4.xx. + Fix abort in alpha compiler. Fortran-specific fixes * Fix the IDate intrinsic (VXT) (in libg2c) so the returned year is in the documented, non-Y2K-compliant range of 0-99, instead of being returned as 100 in the year 2000. * Fix the `Date_and_Time' intrinsic (in libg2c) to return the milliseconds value properly in Values(8). * Fix the `LStat' intrinsic (in libg2c) to return device-ID information properly in SArray(7). An important goal of EGCS is to allow wide scale testing of new features and optimizations which are still under development. However, EGCS has been carefully tested and should be comparable in quality to most gcc releases. EGCS 1.1.2 is based on the June 6, 1998 snapshot of the GCC 2.8 development sources; it contains all of the new features found in GCC 2.8.1 as well as all new development from gcc2 up to June 6, 1998. See the [1]new features page for a more complete list of new features found in EGCS 1.1 releases. The EGCS 1.1.2 release includes installation instructions in both HTML and plaintext forms (see the INSTALL directory in the toplevel directory of the EGCS 1.1.2 distribution). However, we also keep the most up to date [2]installation instructions and [3]build/test status on our web page. We will update those pages as new information becomes available. The EGCS project would like to thank the numerous people that have contributed new features, test results, bugfixes, etc. This [4]amazing group of volunteers is what makes EGCS successful. And finally, we can't in good conscience fail to mention some [5]caveats to using EGCS 1.1.2. [6]Download EGCS 1.1.2 from egcs.cygnus.com (USA California) --> [7]Download EGCS 1.1.2 from go.cygnus.com (USA California - High speed link provided by Stanford) The EGCS 1.1.2 release is also available on many [8]mirror sites. _________________________________________________________________ Last modified on July 28, 1999. References 1. http://gcc.gnu.org/egcs-1.1/features.html 2. http://gcc.gnu.org/install/index.html 3. http://gcc.gnu.org/egcs-1.1/buildstat.html 4. http://gcc.gnu.org/thanks.html 5. http://gcc.gnu.org/egcs-1.1/caveats.html 6. ftp://egcs.cygnus.com/pub/egcs/releases/index.html 7. ftp://go.cygnus.com/pub/sourceware.cygnus.com/pub/egcs/releases/index.html 8. http://gcc.gnu.org/mirrors.html ====================================================================== http://gcc.gnu.org/egcs-1.1/egcs-1.1.1.html EGCS 1.1.1 December 1, 1998 We are pleased to announce the release of EGCS 1.1.1. EGCS is a collaborative effort involving several groups of hackers using an open development model to accelerate development and testing of GNU compilers and runtime libraries. EGCS 1.1.1 is a minor update to the EGCS 1.1 compiler to fix several serious problems in EGCS 1.1. * General improvements and fixes + Avoid some stack overflows when compiling large functions. + Avoid incorrect loop invariant code motions. + Fix some core dumps on Linux kernel code. + Bring back the imake -Di386 and friends fix from EGCS 1.0.2. + Fix code generation problem in gcse. + Various documentation related fixes. * g++/libstdc++ improvements and fixes + MT safe EH fix for setjmp/longjmp based exception handling. + Fix a few bad interactions between optimization and exception handling. + Fixes for demangling of template names starting with "__". + Fix a bug that would fail to run destructors in some cases with -O2. + Fix 'new' of classes with virtual bases. + Fix crash building Qt on the Alpha. + Fix failure compiling WIFEXITED macro on GNU/Linux. + Fix some -frepo failures. * g77 and libf2c improvements and fixes + Various documentation fixes. + Avoid compiler crash on RAND intrinsic. + Fix minor bugs in makefiles exposed by BSD make programs. + Define _XOPEN_SOURCE for libI77 build to avoid potential problems on some 64-bit systems. + Fix problem with implicit endfile on rewind. + Fix spurious recursive I/O errors. * platform specific improvements and fixes + Match all versions of UnixWare7. + Do not assume x86 SVR4 or UnixWare targets can handle stabs + Fix PPC/RS6000 LEGITIMIZE_ADDRESS macro and bug in conversion from unsigned ints to double precision floats. + Fix ARM ABI issue with NetBSD. + Fix a few arm code generation bugs. + Fixincludes will fix additional broken SCO OpenServer header files. + Fix a m68k backend bug which caused invalid offsets in reg+d addresses. + Fix problems with 64bit AIX 4.3 support. + Fix handling of long longs for varargs/stdarg functions on the ppc. + Minor fixes to CPP predefines for Windows. + Fix code generation problems with gpr<->fpr copies for 64bit ppc + Fix a few coldfire code generation bugs. + Fix some more header file problems on SunOS 4.x + Fix assert.h handling for RTEMS. + Fix Windows handling of TREE_SYMBOL_REFERENCED. + Fix x86 compiler abort in reg-stack pass. + Fix cygwin/windows problem with section attributes. + Fix Alpha code generation problem exposed by SMP Linux kernels. + Fix typo in m68k 32->64bit integer conversion. + Make sure target libraries build with -fPIC for PPC & Alpha targets. An important goal of EGCS is to allow wide scale testing of new features and optimizations which are still under development. However, EGCS has been carefully tested and should be comparable in quality to most gcc releases. EGCS 1.1.1 is based on the June 6, 1998 snapshot of the GCC 2.8 development sources; it contains all of the new features found in GCC 2.8.1 as well as all new development from gcc2 up to June 6, 1998. See the [1]new features page for a more complete list of new features found in EGCS 1.1 releases. The EGCS 1.1.1 release includes installation instructions in both HTML and plaintext forms (see the INSTALL directory in the toplevel directory of the EGCS 1.1.1 distribution). However, we also keep the most up to date [2]installation instructions and [3]build/test status on our web page. We will update those pages as new information becomes available. The EGCS project would like to thank the numerous people that have contributed new features, test results, bugfixes, etc. This [4]amazing group of volunteers is what makes EGCS successful. And finally, we can't in good conscience fail to mention some [5]caveats to using EGCS 1.1.1. [6]Download EGCS 1.1.1 from egcs.cygnus.com (USA California) The EGCS 1.1.1 release is also available on many mirror sites. [7]Goto mirror list to find a closer site _________________________________________________________________ Last modified on July 28, 1999. References 1. http://gcc.gnu.org/egcs-1.1/features.html 2. http://gcc.gnu.org/install/index.html 3. http://gcc.gnu.org/egcs-1.1/buildstat.html 4. http://gcc.gnu.org/thanks.html 5. http://gcc.gnu.org/egcs-1.1/caveats.html 6. ftp://egcs.cygnus.com/pub/egcs/releases/index.html 7. http://gcc.gnu.org/mirrors.html ====================================================================== http://gcc.gnu.org/egcs-1.1/egcs-1.1.html EGCS 1.1 September 3, 1998 We are pleased to announce the release of EGCS 1.1. EGCS is a free software project to further the development of the GNU compilers using an open development environment. EGCS 1.1 is a major new release of the EGCS compiler system. It has been [1]extensively tested and is believed to be stable and suitable for widespread use. EGCS 1.1 is based on an June 6, 1998 snapshot of the GCC 2.8 development sources; it contains all of the new features found in GCC 2.8.1 as well as all new development from GCC up to June 6, 1998. EGCS also contains many improvements and features not found in GCC or in older versions of EGCS. * Global common subexpression elimination and global constant/copy propagation (aka [2]gcse) * Ongoing improvements to the [3]alias analysis support to allow for better optimizations throughout the compiler. * Vastly improved [4]C++ compiler and integrated C++ runtime libraries. * Fixes for the /tmp symlink race security problems. * New targets including mips16, arm-thumb and 64 bit PowerPC. * Improvements to GNU Fortran (g77) compiler and runtime library made since [5]g77 version 0.5.23. See the [6]new features page for a more complete list of new features found in EGCS 1.1 releases. The EGCS 1.1 release includes installation instructions in both HTML and plaintext forms (see the INSTALL directory in the toplevel directory of the EGCS 1.1 distribution). However, we also keep the most up to date [7]installation instructions and [8]build/test status on our web page. We will update those pages as new information becomes available. The EGCS project would like to thank the numerous people that have contributed new features, test results, bugfixes, etc. This [9]amazing group of volunteers is what makes EGCS successful. And finally, we can't in good conscience fail to mention some [10]caveats to using EGCS 1.1. [11]Download EGCS 1.1 from egcs.cygnus.com (USA California) [12]Download EGCS 1.1 from go.cygnus.com (USA California -- High speed link provided by Stanford) The EGCS 1.1 release is also available on many mirror sites. [13]Goto mirror list to find a closer site _________________________________________________________________ Last modified on September 4, 1999. References 1. http://gcc.gnu.org/egcs-1.1/egcs-1.1-test.html 2. http://gcc.gnu.org/news/gcse.html 3. http://gcc.gnu.org/news/alias.html 4. http://gcc.gnu.org/egcs-1.1/c++features.html 5. http://gcc.gnu.org/onlinedocs/g77_news.html 6. http://gcc.gnu.org/egcs-1.1/features.html 7. http://gcc.gnu.org/install/index.html 8. http://gcc.gnu.org/egcs-1.1/buildstat.html 9. http://gcc.gnu.org/thanks.html 10. http://gcc.gnu.org/egcs-1.1/caveats.html 11. ftp://egcs.cygnus.com/pub/egcs/releases/index.html 12. ftp://go.cygnus.com/pub/sourceware.cygnus.com/pub/egcs/releases/index.html 13. http://gcc.gnu.org/mirrors.html ====================================================================== http://gcc.gnu.org/egcs-1.1/features.html EGCS 1.1 new features * Integrated GNU Fortran (g77) compiler and runtime library with improvements, based on [1]g77 version 0.5.23. * Vast improvements in the C++ compiler; so many they have [2]page of their own! * Compiler implements [3]global common subexpression elimination and global copy/constant propagation. * More major improvements in the [4]alias analysis code. * More major improvements in the exception handling code to improve performance, lower static overhead and provide the infrastructure for future improvements. * The infamous /tmp symlink race security problems have been fixed. * The regmove optimization pass has been nearly completely rewritten to improve performance of generated code. * The compiler now recomputes register usage information before local register allocation. By providing more accurate information to the priority based allocator, we get better register allocation. * The register reloading phase of the compiler optimizes spill code much better than in previous releases. * Some bad interactions between the register allocator and instruction scheduler have been fixed, resulting in much better code for certain programs. Additionally, we have tuned the scheduler in various ways to improve performance of generated code for some architectures. * The compiler's branch shortening algorithms have been significantly improved to work better on targets which align jump targets. * The compiler now supports -Os to prefer optimizing for code space over optimizing for code speed. * The compiler will now totally eliminate library calls which compute constant values. This primarily helps targets with no integer div/mul support and targets without floating point support. * The compiler now supports an extensive "--help" option. * cpplib has been greatly improved and may be suitable for limited use. * Memory footprint for the compiler has been significantly reduced for some pathological cases. * The time to build EGCS has been improved for certain targets (particularly the alpha and mips platforms). * Many infrastructure improvements throughout the compiler, plus the usual mountain of bugfixes and minor improvements. * Target dependent improvements: + SPARC port now includes V8 plus and V9 support as well as performance tuning for Ultra class machines. The SPARC port now uses the Haifa scheduler. + Alpha port has been tuned for the EV6 processor and has an optimized expansion of memcpy/bzero. The Alpha port now uses the Haifa scheduler. + RS6000/PowerPC: EGCS 1.1 includes support for the Power64 architecture and aix4.3 support. The RS6000/PowerPC port now uses the Haifa scheduler. + x86: Alignment of static store data and jump targets is per Intel recommendations now. Various improvements throughout the x86 port to improve performance on Pentium processors. Conditional move support has been fixed and enabled for PPro processors. The x86 port also better supports 64bit operations now. + MIPS has improved multiply/multiply-add support and now includes mips16 ISA support. + M68k has many micro-optimizations and Coldfire fixes. * Core compiler is based on the GCC development tree from June 9, 1998, so we have all of the [5]features found in GCC 2.8. [6]Return to the EGCS home page Last modified: September 4, 1999 References 1. http://gcc.gnu.org/onlinedocs/g77_news.html 2. http://gcc.gnu.org/egcs-1.1/c++features.html 3. http://gcc.gnu.org/news/gcse.html 4. http://gcc.gnu.org/news/alias.html 5. http://gcc.gnu.org/egcs-1.0/features-2.8.html 6. http://gcc.gnu.org/index.html ====================================================================== http://gcc.gnu.org/egcs-1.1/caveats.html EGCS 1.1 Caveats * EGCS has an integrated libstdc++, but does not have an integrated libg++. Furthermore old libg++ releases will not work with EGCS; HJ Lu has made a [1]libg++ snapshot available which may work with EGCS. Note most C++ programs only need libstdc++. * Exception handling may not work with shared libraries, particularly on alphas, hppas, rs6000/powerpc and mips based platforms. Exception handling is known to work on x86-linux platforms with shared libraries. * Some versions of the Linux kernel have bugs which prevent them from being compiled or from running when compiled by EGCS. See [2]the FAQ for additional information. * In general, EGCS is more rigorous about rejecting invalid C++ code or deprecated C++ constructs than g++-2.7, g++-2.8 or EGCS 1.0. As a result it may be necessary to fix C++ code before it will compile with EGCS. * G++ is also converting toward the ISO C++ standard; as a result code which was previously valid (and thus accepted by other compilers and older versions of g++) may no longer be accepted. * EGCS 1.1 compiled C++ code is not binary compatible with EGCS 1.0.x or GCC 2.8.x due to changes necessary to support thread safe exception handling. [3]Return to the GCC home page Last modified: July 28, 1999 References 1. ftp://ftp.yggdrasil.com/private/hjl/libg++-2.8.1.2.tar.gz 2. http://gcc.gnu.org/faq.html#linuxkernel 3. http://gcc.gnu.org/index.html ====================================================================== http://gcc.gnu.org/egcs-1.0/egcs-1.0.3.html EGCS 1.0.3 May 15, 1998 We are pleased to announce the release of EGCS 1.0.3. EGCS is a collaborative effort involving several groups of hackers using an open development model to accelerate development and testing of GNU compilers and runtime libraries. EGCS 1.0.3 is a minor update to the EGCS 1.0.2 compiler to fix a few problems reported by Red Hat for builds of Red Hat 5.1. * Generic bugfixes: + Fix a typo in the libio library which resulted in incorrect behavior of istream::get. + Fix the Fortran negative array index problem. + Fix a major problem with the ObjC runtime thread support exposed by glibc2. + Reduce memory consumption of the Haifa scheduler. * Target specific bugfixes: + Fix one x86 floating point code generation bug exposed by glibc2 builds. + Fix one x86 internal compiler error exposed by glibc2 builds. + Fix profiling bugs on the Alpha. + Fix ImageMagick & emacs 20.2 build problems on the Alpha. + Fix rs6000/ppc bug when converting values from integer types to floating point types. An important goal of EGCS is to allow wide scale testing of new features and optimizations which are still under development. However, EGCS has been carefully tested and should be comparable in quality to most GCC releases. EGCS 1.0.3 is based on an August 2, 1997 snapshot of the GCC 2.8 development sources; it contains nearly all of the new features found in GCC 2.8. EGCS also contains many improvements and features not found in GCC 2.7 or GCC 2.8. * Integrated C++ runtime libraries, including support for most major GNU/Linux systems! * The integrated libstdc++ library includes a verbatim copy of [1]SGI's STL release instead of a modified copy. * Integrated GNU Fortran compiler * New instruction scheduler * New alias analysis code See the [2]new features page for a more complete list of new features found in EGCS 1.0.x releases. The EGCS 1.0.3 release includes installation instructions in both HTML and plaintext forms (see the INSTALL directory in the toplevel directory of the EGCS 1.0.3 distribution). However, we also keep the most up to date [3]installation instructions and [4]build/test status on our web page. We will update those pages as new information becomes available. And, we can't in good conscience fail to mention some [5]caveats to using EGCS. Update: Big thanks to Stanford for providing a high speed link for downloading EGCS (go.cygnus.com)! [6]Download EGCS 1.0.3 from ftp.cygnus.com (USA California) [7]Download EGCS 1.0.3 from go.cygnus.com (USA California -- High speed link provided by Stanford) The EGCS 1.0.3 release is also available on many mirror sites. [8]Goto mirror list to find a closer site We'd like to thank the numerous people that have contributed new features, test results, bugfixes, etc. Unfortunately, they're far too numerous to mention by name. _________________________________________________________________ Last modified on February 22, 1999. References 1. http://www.sgi.com/Technology/STL 2. http://gcc.gnu.org/egcs-1.0/features.html 3. http://gcc.gnu.org/install/index.html 4. http://gcc.gnu.org/egcs-1.0/buildstat.html 5. http://gcc.gnu.org/egcs-1.0/caveats.html 6. ftp://egcs.cygnus.com/pub/egcs/releases/index.html 7. ftp://go.cygnus.com/pub/sourceware.cygnus.com/pub/egcs/releases/index.html 8. http://gcc.gnu.org/mirrors.html ====================================================================== http://gcc.gnu.org/egcs-1.0/egcs-1.0.2.html EGCS 1.0.2 March 16, 1998 We are pleased to announce the release of EGCS 1.0.2. EGCS is a collaborative effort involving several groups of hackers using an open development model to accelerate development and testing of GNU compilers and runtime libraries. EGCS 1.0.2 is a minor update to the EGCS 1.0.1 compiler to fix several serious problems in EGCS 1.0.1. * General improvements and fixes + Memory consumption significantly reduced, especially for templates and inline functions. + Fix various problems with glibc2.1. + Fix loop optimization bug exposed by rs6000/ppc port. + Fix to avoid potential code generation problems in jump.c. + Fix some undefined symbol problems in dwarf1 debug support. * g++/libstdc++ improvements and fixes + libstdc++ in the EGCS release has been updated and should be link compatible with libstdc++-2.8. + Various fixes in libio/libstdc++ to work better on Linux systems. + Fix problems with duplicate symbols on systems that do not support weak symbols. + Memory corruption bug and undefined symbols in bastring have been fixed. + Various exception handling fixes. + Fix compiler abort for very long thunk names. * g77 improvements and fixes + Fix compiler crash for omitted bound in Fortran CASE statement. + Add missing entries to g77 lang-options. + Fix problem with -fpedantic in the g77 compiler. + Fix "backspace" problem with g77 on alphas. + Fix x86 backend problem with Fortran literals and -fpic. + Fix some of the problems with negative subscripts for g77 on alphas. + Fixes for Fortran builds on cygwin32/mingw32. * platform specific improvements and fixes + Fix long double problems on x86 (exposed by glibc) + x86 ports define i386 again to keep imake happy. + Fix exception handling support on NetBSD ports. + Several changes to collect2 to fix many problems with AIX. + Define __ELF__ for rs6000/linux. + Fix -mcall-linux problem on rs6000/linux. + Fix stdarg/vararg problem for rs6000/linux. + Allow autoconf to select a proper install problem on AIX 3.1. + m68k port support includes -mcpu32 option as well as cpu32 multilibs. + Fix stdarg bug for irix6. + Allow EGCS to build on irix5 without the gnu assembler. + Fix problem with static linking on sco5. + Fix bootstrap on sco5 with native compiler. + Fix for abort building newlib on H8 target. + Fix fixincludes handling of math.h on SunOS. + Minor fix for motorola 3300 m68k systems. An important goal of EGCS is to allow wide scale testing of new features and optimizations which are still under development. However, EGCS has been carefully tested and should be comparable in quality to most GCC releases. EGCS 1.0.2 is based on an August 2, 1997 snapshot of the GCC 2.8 development sources; it contains nearly all of the new features found in GCC 2.8. EGCS also contains many improvements and features not found in GCC 2.7 or GCC 2.8. * Integrated C++ runtime libraries, including support for most major linux systems! * The integrated libstdc++ library includes a verbatim copy of [1]SGI's STL release. * Integrated GNU Fortran compiler * New instruction scheduler * New alias analysis code See the [2]new features page for a more complete list of new features found in EGCS 1.0.x releases. The EGCS 1.0.2 release includes installation instructions in both HTML and plaintext forms (see the INSTALL directory in the toplevel directory of the EGCS 1.0.2 distribution). However, we also keep the most up to date [3]installation instructions and [4]build/test status on our web page. We will update those pages as new information becomes available. And, we can't in good conscience fail to mention some [5]caveats to using EGCS. Update: Big thanks to Stanford for providing a high speed link for downloading EGCS (go.cygnus.com)! [6]Download EGCS 1.0.2 from ftp.cygnus.com (USA California) [7]Download EGCS 1.0.2 from go.cygnus.com (USA California -- High speed link provided by Stanford) The EGCS 1.0.2 release is also available on many mirror sites. [8]Goto mirror list to find a closer site We'd like to thank the numerous people that have contributed new features, test results, bugfixes, etc. Unfortunately, they're far too numerous to mention by name. _________________________________________________________________ Last modified on July 28, 1999. References 1. http://www.sgi.com/Technology/STL/ 2. http://gcc.gnu.org/egcs-1.0/features.html 3. http://gcc.gnu.org/install/index.html 4. http://gcc.gnu.org/egcs-1.0/buildstat.html 5. http://gcc.gnu.org/egcs-1.0/caveats.html 6. ftp://egcs.cygnus.com/pub/egcs/releases/index.html 7. ftp://go.cygnus.com/pub/sourceware.cygnus.com/pub/egcs/releases/index.html 8. http://gcc.gnu.org/mirrors.html ====================================================================== http://gcc.gnu.org/egcs-1.0/egcs-1.0.1.html EGCS 1.0.1 January 6, 1998 We are pleased to announce the release of EGCS 1.0.1. EGCS is a collaborative effort involving several groups of hackers using an open development model to accelerate development and testing of GNU compilers and runtime libraries. EGCS 1.0.1 is a minor update to the EGCS 1.0 compiler to fix a few critical bugs and add support for Red Hat 5.0 Linux. Changes since the EGCS 1.0 release: * Add support for Red Hat 5.0 Linux and better support for Linux systems using glibc2. Many programs failed to link when compiled with EGCS 1.0 on Red Hat 5.0 or on systems with newer versions of glibc2. EGCS 1.0.1 should fix these problems. * Compatability with both EGCS 1.0 and GCC 2.8 libgcc exception handling interfaces. To avoid future compatibility problems, we strongly urge anyone who is planning on distributing shared libraries that contain C++ code to upgrade to EGCS 1.0.1 first. Soon after EGCS 1.0 was released, the GCC developers made some incompatible changes in libgcc's exception handling interfaces. These changes were needed to solve problems on some platforms. This means that GCC 2.8.0, when released, will not be seamlessly compatible with shared libraries built by EGCS 1.0. The reason is that the libgcc.a in GCC 2.8.0 will not contain a function needed by the old interface. The result of this is that there may be compatibility problems with shared libraries built by EGCS 1.0 when used with GCC 2.8.0. With EGCS 1.0.1, generated code uses the new (GCC 2.8.0) interface, and libgcc.a has the support routines for both the old and the new interfaces (so EGCS 1.0.1 and EGCS 1.0 code can be freely mixed, and EGCS 1.0.1 and GCC 2.8.0 code can be freely mixed). The maintainers of GCC 2.x have decided against including seamless support for the old interface in 2.8.0, since it was never "official", so to avoid future compatibility problems we recommend against distributing any shared libraries built by EGCS 1.0 that contain C++ code (upgrade to 1.0.1 and use that). * Various bugfixes in the x86, hppa, mips, and rs6000/ppc backends. The x86 changes fix code generation errors exposed when building glibc2 and the Linux dynamic linker (ld.so). The hppa change fixes a compiler abort when configured for use with RTEMS. The MIPS changes fix problems with the definition of LONG_MAX on newer systems, allow for command line selection of the target ABI, and fix one code generation problem. The rs6000/ppc change fixes some problems with passing structures to varargs/stdarg functions. * A few machine independent bugfixes, mostly to fix code generation errors when building Linux kernels or glibc. * Fix a few critical exception handling and template bugs in the C++ compiler. * Fix Fortran namelist bug on alphas. * Fix build problems on x86-solaris systems. An important goal of EGCS is to allow wide scale testing of new features and optimizations which are still under development. However, EGCS has been carefully tested and should be comparable in quality to most GCC releases. EGCS 1.0.1 is based on an August 2, 1997 snapshot of the GCC 2.8 development sources; it contains nearly all of the new features found in GCC 2.8. EGCS also contains many improvements and features not found in GCC 2.7 and even the soon to be released GCC 2.8 compilers. * Integrated C++ runtime libraries, including support for most major linux systems! * The integrated libstdc++ library includes a verbatim copy of [1]SGI's STL release. * Integrated GNU Fortran compiler * New instruction scheduler * New alias analysis code See the [2]new features page for a more complete list of new features found in EGCS 1.0.x releases. The EGCS 1.0.1 release includes installation instructions in both HTML and plaintext forms (see the INSTALL directory in the toplevel directory of the EGCS 1.0.1 distribution). However, we also keep the most up to date [3]installation instructions and [4]build/test status on our web page. We will update those pages as new information becomes available. And, we can't in good conscience fail to mention some [5]caveats to using EGCS. Update: Big thanks to Stanford for providing a high speed link for downloading EGCS (go.cygnus.com)! [6]Download EGCS 1.0.1 from ftp.cygnus.com (USA California) [7]Download EGCS 1.0.1 from go.cygnus.com (USA California -- High speed link provided by Stanford) The EGCS 1.0.1 release is also available on many mirror sites. [8]Goto mirror list to find a closer site We'd like to thank the numerous people that have contributed new features, test results, bugfixes, etc. Unfortunately, they're far too numerous to mention by name. _________________________________________________________________ Last modified on July 28, 1999. References 1. http://www.sgi.com/Technology/STL/ 2. http://gcc.gnu.org/egcs-1.0/features.html 3. http://gcc.gnu.org/install/index.html 4. http://gcc.gnu.org/egcs-1.0/buildstat.html 5. http://gcc.gnu.org/egcs-1.0/caveats.html 6. ftp://egcs.cygnus.com/pub/egcs/releases/index.html 7. ftp://go.cygnus.com/pub/sourceware.cygnus.com/pub/egcs/releases/index.html 8. http://gcc.gnu.org/mirrors.html ====================================================================== http://gcc.gnu.org/egcs-1.0/egcs-1.0.html EGCS 1.0 December 3, 1997 We are pleased to announce the release of EGCS 1.0. EGCS is a collaborative effort involving several groups of hackers using an open development model to accelerate development and testing of GNU compilers and runtime libraries. An important goal of EGCS is to allow wide scale testing of experimental features and optimizations; therefore, EGCS contains some features and optimizations which are still under development. However, EGCS has been carefully tested and should be comparable in quality to most GCC releases. EGCS 1.0 is based on an August 2, 1997 snapshot of the GCC 2.8 development sources; it contains nearly all of the new features found in GCC 2.8. EGCS 1.0 also contains many improvements and features not found in GCC 2.7 and even the soon to be released GCC 2.8 compilers. * Integrated C++ runtime libraries, including support for most major linux systems! * The integrated libstdc++ library includes a verbatim copy of [1]SGI's STL release. * Integrated GNU Fortran compiler * New instruction scheduler * New alias analysis code See the [2]new features page for a more complete list of new features. The EGCS 1.0 release includes installation instructions in both HTML and plaintext forms (see the INSTALL directory in the toplevel directory of the EGCS 1.0 distribution). However, we also keep the most up to date [3]installation instructions and [4]build/test status on our web page. We will update those pages as new information becomes available. And, we can't in good conscience fail to mention some [5]caveats to using EGCS. Update: The T1 into our main California offices has been 100% saturated since shortly after the release. We've added an EGCS 1.0 mirror at our Massachusetts office to help share the load. We also encourage folks to use the many mirrors available throughout the world. Update: Big thanks to Stanford for providing a high speed link for downloading EGCS! (go.cygnus.com) [6]Download EGCS 1.0 from ftp.cygnus.com (USA California) [7]Download EGCS 1.0 from go.cygnus.com (USA California -- High speed link provided by Stanford) The EGCS 1.0 release should be available on most mirror sites by now. [8]Goto mirror list to find a closer site We'd like to thank the numerous people that have contributed new features, test results, bugfixes, etc. Unfortunately, they're far too numerous to mention by name. _________________________________________________________________ Last modified on July 28, 1999. References 1. http://www.sgi.com/Technology/STL 2. http://gcc.gnu.org/egcs-1.0/features.html 3. http://gcc.gnu.org/install/index.html 4. http://gcc.gnu.org/egcs-1.0/buildstat.html 5. http://gcc.gnu.org/egcs-1.0/caveats.html 6. ftp://egcs.cygnus.com/pub/egcs/releases/index.html 7. ftp://go.cygnus.com/pub/sourceware.cygnus.com/pub/egcs/releases/index.html 8. http://gcc.gnu.org/mirrors.html ====================================================================== http://gcc.gnu.org/egcs-1.0/features.html EGCS 1.0 features * Core compiler is based on the gcc2 development tree from Aug 2, 1997, so we have most of the [1]features found in GCC 2.8. * Integrated GNU Fortran compiler based on g77-0.5.22-19970929. * Vast improvements in the C++ compiler; so many they have [2]page of their own! * Integrated C++ runtime libraries, including support for most major linux systems! * New instruction scheduler from IBM Haifa which includes support for function wide instruction scheduling as well as superscalar scheduling. * Significantly improved alias analysis code. * Improved register allocation for two address machines. * Significant code generation improvements for Fortran code on Alphas * Various optimizations from the g77 project as well as improved loop optimizations. * Dwarf2 debug format support for some targets. * egcs libstdc++ includes the SGI STL implementation without changes. * As a result of these and other changes, egcs libstc++ is not binary compatible with previous releases of libstdc++. * Various new ports -- UltraSPARC, Irix6.2 & Irix6.3 support, The SCO Openserver 5 family (5.0.{0,2,4} and Internet FastStart 1.0 and 1.1), Support for RTEMS on several embedded targets, Support for arm-linux, Mitsubishi M32R, Hitachi H8/S, Matsushita MN102 and MN103, NEC V850, Sparclet, Solaris & Linux on PowerPCs, etc. * Integrated testsuites for gcc, g++, g77, libstdc++ and libio. * RS6000/PowerPC ports generate code which can run on all RS6000/PowerPC variants by default. * -mcpu= and -march= switches for the x86 port to allow better control over how the x86 port generates code. * Includes the template repository patch (aka repo patch); note the new template code makes repo obsolete for ELF systems using gnu-ld such as Linux. * Plus the usual assortment of bugfixes and improvements. [3]Return to the egcs home page Last modified: July 28, 1999 References 1. http://gcc.gnu.org/egcs-1.0/features-2.8.html 2. http://gcc.gnu.org/egcs-1.0/c++features.html 3. http://gcc.gnu.org/index.html ====================================================================== http://gcc.gnu.org/egcs-1.0/caveats.html EGCS 1.0 Caveats * EGCS has an integrated libstdc++, but does not have an integrated libg++. Furthermore old libg++ releases will not work with egc; HJ Lu has made a [1]libg++ snapshot available which may work with EGCS. Note most C++ programs only need libstdc++. * Note that using -pedantic or -Wreturn-type can cause an explosion in the amount of memory needed for template-heavy C++ code, such as code that uses STL. Also note that -Wall includes -Wreturn-type, so if you use -Wall you will need to specify -Wno-return-type to turn it off. * Exception handling may not work with shared libraries, particularly on alphas, hppas, and mips based platforms. Exception handling is known to work on x86-linux platforms with shared libraries. * Some versions of the Linux kernel have bugs which prevent them from being compiled or from running when compiled by EGCS. See [2]the FAQ for additional information. * In general, EGCS is more rigorous about rejecting invalid C++ code or deprecated C++ constructs than G++ 2.7. As a result it may be necessary to fix C++ code before it will compile with EGCS. * G++ is also aggressively tracking the C++ standard; as a result code which was previously valid (and thus accepted by other compilers and older versions of G++) may no longer be accepted. * EGCS 1.0 may not work with Red Hat Linux 5.0 on all targets. EGCS 1.0.x and later releases should work with Red Hat Linux 5.0. [3]Return to the GCC home page Last modified: August 27, 1998 References 1. ftp://ftp.yggdrasil.com/private/hjl/libg++-2.8.1.2.tar.gz 2. http://gcc.gnu.org/faq.html#linuxkernel 3. http://gcc.gnu.org/index.html ======================================================================