From c45f211ee347bc648b183c5123498c5b7310bb0e Mon Sep 17 00:00:00 2001
From: Tom Tromey <tromey@gcc.gnu.org>
Date: Tue, 4 May 1999 19:30:25 +0000
Subject: Initial revision

From-SVN: r26770
---
 zlib/contrib/delphi2/d_zlib.bpr | 224 +++++++++++++++++
 zlib/contrib/delphi2/d_zlib.cpp |  17 ++
 zlib/contrib/delphi2/readme.txt |  17 ++
 zlib/contrib/delphi2/zlib.bpg   |  26 ++
 zlib/contrib/delphi2/zlib.bpr   | 225 +++++++++++++++++
 zlib/contrib/delphi2/zlib.cpp   |  22 ++
 zlib/contrib/delphi2/zlib.pas   | 534 ++++++++++++++++++++++++++++++++++++++++
 zlib/contrib/delphi2/zlib32.bpr | 174 +++++++++++++
 zlib/contrib/delphi2/zlib32.cpp |  42 ++++
 9 files changed, 1281 insertions(+)
 create mode 100644 zlib/contrib/delphi2/d_zlib.bpr
 create mode 100644 zlib/contrib/delphi2/d_zlib.cpp
 create mode 100644 zlib/contrib/delphi2/readme.txt
 create mode 100644 zlib/contrib/delphi2/zlib.bpg
 create mode 100644 zlib/contrib/delphi2/zlib.bpr
 create mode 100644 zlib/contrib/delphi2/zlib.cpp
 create mode 100644 zlib/contrib/delphi2/zlib.pas
 create mode 100644 zlib/contrib/delphi2/zlib32.bpr
 create mode 100644 zlib/contrib/delphi2/zlib32.cpp

(limited to 'zlib/contrib/delphi2')

diff --git a/zlib/contrib/delphi2/d_zlib.bpr b/zlib/contrib/delphi2/d_zlib.bpr
new file mode 100644
index 0000000..78bb254
--- /dev/null
+++ b/zlib/contrib/delphi2/d_zlib.bpr
@@ -0,0 +1,224 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+
+# ---------------------------------------------------------------------------
+# IDE SECTION
+# ---------------------------------------------------------------------------
+# The following section of the project makefile is managed by the BCB IDE.
+# It is recommended to use the IDE to change any of the values in this
+# section.
+# ---------------------------------------------------------------------------
+
+VERSION = BCB.03
+# ---------------------------------------------------------------------------
+PROJECT = d_zlib.lib
+OBJFILES = d_zlib.obj adler32.obj deflate.obj infblock.obj infcodes.obj inffast.obj \
+  inflate.obj inftrees.obj infutil.obj trees.obj
+RESFILES =
+RESDEPEN = $(RESFILES)
+LIBFILES =
+LIBRARIES = VCL35.lib
+SPARELIBS = VCL35.lib
+DEFFILE =
+PACKAGES = VCLX35.bpi VCL35.bpi VCLDB35.bpi VCLDBX35.bpi ibsmp35.bpi bcbsmp35.bpi \
+  dclocx35.bpi QRPT35.bpi TEEUI35.bpi TEEDB35.bpi TEE35.bpi DSS35.bpi \
+  NMFAST35.bpi INETDB35.bpi INET35.bpi VCLMID35.bpi
+# ---------------------------------------------------------------------------
+PATHCPP = .;
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+DEBUGLIBPATH = $(BCB)\lib\debug
+RELEASELIBPATH = $(BCB)\lib\release
+# ---------------------------------------------------------------------------
+CFLAG1 = -O2 -Ve -d -k- -vi
+CFLAG2 = -I$(BCB)\include;$(BCB)\include\vcl -H=$(BCB)\lib\vcl35.csm
+CFLAG3 = -ff -pr -5
+PFLAGS = -U;$(DEBUGLIBPATH) -I$(BCB)\include;$(BCB)\include\vcl -H -W -$I- -v -JPHN -M
+RFLAGS = -i$(BCB)\include;$(BCB)\include\vcl 
+AFLAGS = /i$(BCB)\include /i$(BCB)\include\vcl /mx /w2 /zn
+LFLAGS =
+IFLAGS = -g -Gn
+# ---------------------------------------------------------------------------
+ALLOBJ = c0w32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cp32mt.lib
+# ---------------------------------------------------------------------------
+!!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1040
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=2
+Item0=$(BCB)\include
+Item1=$(BCB)\include;$(BCB)\include\vcl
+
+[HistoryLists\hlLibraryPath]
+Count=1
+Item0=$(BCB)\lib\obj;$(BCB)\lib
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+
+!endif
+
+ ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = TLib
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1040
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=2
+Item0=$(BCB)\include;$(BCB)\include\vcl
+Item1=$(BCB)\include
+
+[HistoryLists\hlLibraryPath]
+Count=1
+Item0=$(BCB)\lib\obj;$(BCB)\lib
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+
+!endif
+
+$(PROJECT): $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) $(IFLAGS) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -fo$@ $<
+# ---------------------------------------------------------------------------
diff --git a/zlib/contrib/delphi2/d_zlib.cpp b/zlib/contrib/delphi2/d_zlib.cpp
new file mode 100644
index 0000000..f5dea59
--- /dev/null
+++ b/zlib/contrib/delphi2/d_zlib.cpp
@@ -0,0 +1,17 @@
+#include <condefs.h>
+#pragma hdrstop
+//---------------------------------------------------------------------------
+USEUNIT("adler32.c");
+USEUNIT("deflate.c");
+USEUNIT("infblock.c");
+USEUNIT("infcodes.c");
+USEUNIT("inffast.c");
+USEUNIT("inflate.c");
+USEUNIT("inftrees.c");
+USEUNIT("infutil.c");
+USEUNIT("trees.c");
+//---------------------------------------------------------------------------
+#define Library
+
+// To add a file to the library use the Project menu 'Add to Project'.
+
diff --git a/zlib/contrib/delphi2/readme.txt b/zlib/contrib/delphi2/readme.txt
new file mode 100644
index 0000000..cbd3162
--- /dev/null
+++ b/zlib/contrib/delphi2/readme.txt
@@ -0,0 +1,17 @@
+These are files used to compile zlib under Borland C++ Builder 3.
+
+zlib.bpg is the main project group that can be loaded in the BCB IDE and
+loads all other *.bpr projects
+
+zlib.bpr is a project used to create a static zlib.lib library with C calling
+convention for functions.
+
+zlib32.bpr creates a zlib32.dll dynamic link library with Windows standard
+calling convention.
+
+d_zlib.bpr creates a set of .obj files with register calling convention.
+These files are used by zlib.pas to create a Delphi unit containing zlib.
+The d_zlib.lib file generated isn't useful and can be deleted.
+
+zlib.cpp, zlib32.cpp and d_zlib.cpp are used by the above projects.
+
diff --git a/zlib/contrib/delphi2/zlib.bpg b/zlib/contrib/delphi2/zlib.bpg
new file mode 100644
index 0000000..b6c9acd
--- /dev/null
+++ b/zlib/contrib/delphi2/zlib.bpg
@@ -0,0 +1,26 @@
+#------------------------------------------------------------------------------
+VERSION = BWS.01
+#------------------------------------------------------------------------------
+!ifndef ROOT
+ROOT = $(MAKEDIR)\..
+!endif
+#------------------------------------------------------------------------------
+MAKE = $(ROOT)\bin\make.exe -$(MAKEFLAGS) -f$**
+DCC = $(ROOT)\bin\dcc32.exe $**
+BRCC = $(ROOT)\bin\brcc32.exe $**
+#------------------------------------------------------------------------------
+PROJECTS = zlib zlib32 d_zlib
+#------------------------------------------------------------------------------
+default: $(PROJECTS)
+#------------------------------------------------------------------------------
+
+zlib: zlib.bpr
+  $(MAKE)
+
+zlib32: zlib32.bpr
+  $(MAKE)
+
+d_zlib: d_zlib.bpr
+  $(MAKE)
+
+
diff --git a/zlib/contrib/delphi2/zlib.bpr b/zlib/contrib/delphi2/zlib.bpr
new file mode 100644
index 0000000..cf3945b
--- /dev/null
+++ b/zlib/contrib/delphi2/zlib.bpr
@@ -0,0 +1,225 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+
+# ---------------------------------------------------------------------------
+# IDE SECTION
+# ---------------------------------------------------------------------------
+# The following section of the project makefile is managed by the BCB IDE.
+# It is recommended to use the IDE to change any of the values in this
+# section.
+# ---------------------------------------------------------------------------
+
+VERSION = BCB.03
+# ---------------------------------------------------------------------------
+PROJECT = zlib.lib
+OBJFILES = zlib.obj adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infblock.obj \
+  infcodes.obj inffast.obj inflate.obj inftrees.obj infutil.obj trees.obj \
+  uncompr.obj zutil.obj
+RESFILES =
+RESDEPEN = $(RESFILES)
+LIBFILES =
+LIBRARIES = VCL35.lib
+SPARELIBS = VCL35.lib
+DEFFILE =
+PACKAGES = VCLX35.bpi VCL35.bpi VCLDB35.bpi VCLDBX35.bpi ibsmp35.bpi bcbsmp35.bpi \
+  dclocx35.bpi QRPT35.bpi TEEUI35.bpi TEEDB35.bpi TEE35.bpi DSS35.bpi \
+  NMFAST35.bpi INETDB35.bpi INET35.bpi VCLMID35.bpi
+# ---------------------------------------------------------------------------
+PATHCPP = .;
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+DEBUGLIBPATH = $(BCB)\lib\debug
+RELEASELIBPATH = $(BCB)\lib\release
+# ---------------------------------------------------------------------------
+CFLAG1 = -O2 -Ve -d -k- -vi
+CFLAG2 = -I$(BCB)\include;$(BCB)\include\vcl -H=$(BCB)\lib\vcl35.csm
+CFLAG3 = -ff -5
+PFLAGS = -U;$(DEBUGLIBPATH) -I$(BCB)\include;$(BCB)\include\vcl -H -W -$I- -v -JPHN -M
+RFLAGS = -i$(BCB)\include;$(BCB)\include\vcl 
+AFLAGS = /i$(BCB)\include /i$(BCB)\include\vcl /mx /w2 /zn
+LFLAGS =
+IFLAGS = -g -Gn
+# ---------------------------------------------------------------------------
+ALLOBJ = c0w32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cp32mt.lib
+# ---------------------------------------------------------------------------
+!!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1040
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=2
+Item0=$(BCB)\include
+Item1=$(BCB)\include;$(BCB)\include\vcl
+
+[HistoryLists\hlLibraryPath]
+Count=1
+Item0=$(BCB)\lib\obj;$(BCB)\lib
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+
+!endif
+
+ ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = TLib
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1040
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=2
+Item0=$(BCB)\include;$(BCB)\include\vcl
+Item1=$(BCB)\include
+
+[HistoryLists\hlLibraryPath]
+Count=1
+Item0=$(BCB)\lib\obj;$(BCB)\lib
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+
+!endif
+
+$(PROJECT): $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) $(IFLAGS) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -fo$@ $<
+# ---------------------------------------------------------------------------
diff --git a/zlib/contrib/delphi2/zlib.cpp b/zlib/contrib/delphi2/zlib.cpp
new file mode 100644
index 0000000..bf6953b
--- /dev/null
+++ b/zlib/contrib/delphi2/zlib.cpp
@@ -0,0 +1,22 @@
+#include <condefs.h>
+#pragma hdrstop
+//---------------------------------------------------------------------------
+USEUNIT("adler32.c");
+USEUNIT("compress.c");
+USEUNIT("crc32.c");
+USEUNIT("deflate.c");
+USEUNIT("gzio.c");
+USEUNIT("infblock.c");
+USEUNIT("infcodes.c");
+USEUNIT("inffast.c");
+USEUNIT("inflate.c");
+USEUNIT("inftrees.c");
+USEUNIT("infutil.c");
+USEUNIT("trees.c");
+USEUNIT("uncompr.c");
+USEUNIT("zutil.c");
+//---------------------------------------------------------------------------
+#define Library
+
+// To add a file to the library use the Project menu 'Add to Project'.
+
diff --git a/zlib/contrib/delphi2/zlib.pas b/zlib/contrib/delphi2/zlib.pas
new file mode 100644
index 0000000..10ae4ca
--- /dev/null
+++ b/zlib/contrib/delphi2/zlib.pas
@@ -0,0 +1,534 @@
+{*******************************************************}
+{                                                       }
+{       Delphi Supplemental Components                  }
+{       ZLIB Data Compression Interface Unit            }
+{                                                       }
+{       Copyright (c) 1997 Borland International        }
+{                                                       }
+{*******************************************************}
+
+{ Modified for zlib 1.1.3 by Davide Moretti <dave@rimini.com }
+
+unit zlib;
+
+interface
+
+uses Sysutils, Classes;
+
+type
+  TAlloc = function (AppData: Pointer; Items, Size: Integer): Pointer;
+  TFree = procedure (AppData, Block: Pointer);
+
+  // Internal structure.  Ignore.
+  TZStreamRec = packed record
+    next_in: PChar;       // next input byte
+    avail_in: Integer;    // number of bytes available at next_in
+    total_in: Integer;    // total nb of input bytes read so far
+
+    next_out: PChar;      // next output byte should be put here
+    avail_out: Integer;   // remaining free space at next_out
+    total_out: Integer;   // total nb of bytes output so far
+
+    msg: PChar;           // last error message, NULL if no error
+    internal: Pointer;    // not visible by applications
+
+    zalloc: TAlloc;       // used to allocate the internal state
+    zfree: TFree;         // used to free the internal state
+    AppData: Pointer;     // private data object passed to zalloc and zfree
+
+    data_type: Integer;   //  best guess about the data type: ascii or binary
+    adler: Integer;       // adler32 value of the uncompressed data
+    reserved: Integer;    // reserved for future use
+  end;
+
+  // Abstract ancestor class
+  TCustomZlibStream = class(TStream)
+  private
+    FStrm: TStream;
+    FStrmPos: Integer;
+    FOnProgress: TNotifyEvent;
+    FZRec: TZStreamRec;
+    FBuffer: array [Word] of Char;
+  protected
+    procedure Progress(Sender: TObject); dynamic;
+    property OnProgress: TNotifyEvent read FOnProgress write FOnProgress;
+    constructor Create(Strm: TStream);
+  end;
+
+{ TCompressionStream compresses data on the fly as data is written to it, and
+  stores the compressed data to another stream.
+
+  TCompressionStream is write-only and strictly sequential. Reading from the
+  stream will raise an exception. Using Seek to move the stream pointer
+  will raise an exception.
+
+  Output data is cached internally, written to the output stream only when
+  the internal output buffer is full.  All pending output data is flushed
+  when the stream is destroyed.
+
+  The Position property returns the number of uncompressed bytes of
+  data that have been written to the stream so far.
+
+  CompressionRate returns the on-the-fly percentage by which the original
+  data has been compressed:  (1 - (CompressedBytes / UncompressedBytes)) * 100
+  If raw data size = 100 and compressed data size = 25, the CompressionRate
+  is 75%
+
+  The OnProgress event is called each time the output buffer is filled and
+  written to the output stream.  This is useful for updating a progress
+  indicator when you are writing a large chunk of data to the compression
+  stream in a single call.}
+
+
+  TCompressionLevel = (clNone, clFastest, clDefault, clMax);
+
+  TCompressionStream = class(TCustomZlibStream)
+  private
+    function GetCompressionRate: Single;
+  public
+    constructor Create(CompressionLevel: TCompressionLevel; Dest: TStream);
+    destructor Destroy; override;
+    function Read(var Buffer; Count: Longint): Longint; override;
+    function Write(const Buffer; Count: Longint): Longint; override;
+    function Seek(Offset: Longint; Origin: Word): Longint; override;
+    property CompressionRate: Single read GetCompressionRate;
+    property OnProgress;
+  end;
+
+{ TDecompressionStream decompresses data on the fly as data is read from it.
+
+  Compressed data comes from a separate source stream.  TDecompressionStream
+  is read-only and unidirectional; you can seek forward in the stream, but not
+  backwards.  The special case of setting the stream position to zero is
+  allowed.  Seeking forward decompresses data until the requested position in
+  the uncompressed data has been reached.  Seeking backwards, seeking relative
+  to the end of the stream, requesting the size of the stream, and writing to
+  the stream will raise an exception.
+
+  The Position property returns the number of bytes of uncompressed data that
+  have been read from the stream so far.
+
+  The OnProgress event is called each time the internal input buffer of
+  compressed data is exhausted and the next block is read from the input stream.
+  This is useful for updating a progress indicator when you are reading a
+  large chunk of data from the decompression stream in a single call.}
+
+  TDecompressionStream = class(TCustomZlibStream)
+  public
+    constructor Create(Source: TStream);
+    destructor Destroy; override;
+    function Read(var Buffer; Count: Longint): Longint; override;
+    function Write(const Buffer; Count: Longint): Longint; override;
+    function Seek(Offset: Longint; Origin: Word): Longint; override;
+    property OnProgress;
+  end;
+
+
+
+{ CompressBuf compresses data, buffer to buffer, in one call.
+   In: InBuf = ptr to compressed data
+       InBytes = number of bytes in InBuf
+  Out: OutBuf = ptr to newly allocated buffer containing decompressed data
+       OutBytes = number of bytes in OutBuf   }
+procedure CompressBuf(const InBuf: Pointer; InBytes: Integer;
+                      out OutBuf: Pointer; out OutBytes: Integer);
+
+
+{ DecompressBuf decompresses data, buffer to buffer, in one call.
+   In: InBuf = ptr to compressed data
+       InBytes = number of bytes in InBuf
+       OutEstimate = zero, or est. size of the decompressed data
+  Out: OutBuf = ptr to newly allocated buffer containing decompressed data
+       OutBytes = number of bytes in OutBuf   }
+procedure DecompressBuf(const InBuf: Pointer; InBytes: Integer;
+ OutEstimate: Integer; out OutBuf: Pointer; out OutBytes: Integer);
+
+const
+  zlib_version = '1.1.3';
+
+type
+  EZlibError = class(Exception);
+  ECompressionError = class(EZlibError);
+  EDecompressionError = class(EZlibError);
+
+function adler32(adler: Integer; buf: PChar; len: Integer): Integer;
+
+implementation
+
+const
+  Z_NO_FLUSH      = 0;
+  Z_PARTIAL_FLUSH = 1;
+  Z_SYNC_FLUSH    = 2;
+  Z_FULL_FLUSH    = 3;
+  Z_FINISH        = 4;
+
+  Z_OK            = 0;
+  Z_STREAM_END    = 1;
+  Z_NEED_DICT     = 2;
+  Z_ERRNO         = (-1);
+  Z_STREAM_ERROR  = (-2);
+  Z_DATA_ERROR    = (-3);
+  Z_MEM_ERROR     = (-4);
+  Z_BUF_ERROR     = (-5);
+  Z_VERSION_ERROR = (-6);
+
+  Z_NO_COMPRESSION       =   0;
+  Z_BEST_SPEED           =   1;
+  Z_BEST_COMPRESSION     =   9;
+  Z_DEFAULT_COMPRESSION  = (-1);
+
+  Z_FILTERED            = 1;
+  Z_HUFFMAN_ONLY        = 2;
+  Z_DEFAULT_STRATEGY    = 0;
+
+  Z_BINARY   = 0;
+  Z_ASCII    = 1;
+  Z_UNKNOWN  = 2;
+
+  Z_DEFLATED = 8;
+
+  _z_errmsg: array[0..9] of PChar = (
+    'need dictionary',      // Z_NEED_DICT      (2)
+    'stream end',           // Z_STREAM_END     (1)
+    '',                     // Z_OK             (0)
+    'file error',           // Z_ERRNO          (-1)
+    'stream error',         // Z_STREAM_ERROR   (-2)
+    'data error',           // Z_DATA_ERROR     (-3)
+    'insufficient memory',  // Z_MEM_ERROR      (-4)
+    'buffer error',         // Z_BUF_ERROR      (-5)
+    'incompatible version', // Z_VERSION_ERROR  (-6)
+    ''
+  );
+
+{$L deflate.obj}
+{$L inflate.obj}
+{$L inftrees.obj}
+{$L trees.obj}
+{$L adler32.obj}
+{$L infblock.obj}
+{$L infcodes.obj}
+{$L infutil.obj}
+{$L inffast.obj}
+
+procedure _tr_init; external;
+procedure _tr_tally; external;
+procedure _tr_flush_block; external;
+procedure _tr_align; external;
+procedure _tr_stored_block; external;
+function adler32; external;
+procedure inflate_blocks_new; external;
+procedure inflate_blocks; external;
+procedure inflate_blocks_reset; external;
+procedure inflate_blocks_free; external;
+procedure inflate_set_dictionary; external;
+procedure inflate_trees_bits; external;
+procedure inflate_trees_dynamic; external;
+procedure inflate_trees_fixed; external;
+procedure inflate_codes_new; external;
+procedure inflate_codes; external;
+procedure inflate_codes_free; external;
+procedure _inflate_mask; external;
+procedure inflate_flush; external;
+procedure inflate_fast; external;
+
+procedure _memset(P: Pointer; B: Byte; count: Integer);cdecl;
+begin
+  FillChar(P^, count, B);
+end;
+
+procedure _memcpy(dest, source: Pointer; count: Integer);cdecl;
+begin
+  Move(source^, dest^, count);
+end;
+
+
+
+// deflate compresses data
+function deflateInit_(var strm: TZStreamRec; level: Integer; version: PChar;
+  recsize: Integer): Integer; external;
+function deflate(var strm: TZStreamRec; flush: Integer): Integer; external;
+function deflateEnd(var strm: TZStreamRec): Integer; external;
+
+// inflate decompresses data
+function inflateInit_(var strm: TZStreamRec; version: PChar;
+  recsize: Integer): Integer; external;
+function inflate(var strm: TZStreamRec; flush: Integer): Integer; external;
+function inflateEnd(var strm: TZStreamRec): Integer; external;
+function inflateReset(var strm: TZStreamRec): Integer; external;
+
+
+function zcalloc(AppData: Pointer; Items, Size: Integer): Pointer;
+begin
+  GetMem(Result, Items*Size);
+end;
+
+procedure zcfree(AppData, Block: Pointer);
+begin
+  FreeMem(Block);
+end;
+
+function zlibCheck(code: Integer): Integer;
+begin
+  Result := code;
+  if code < 0 then
+    raise EZlibError.Create('error');    //!!
+end;
+
+function CCheck(code: Integer): Integer;
+begin
+  Result := code;
+  if code < 0 then
+    raise ECompressionError.Create('error'); //!!
+end;
+
+function DCheck(code: Integer): Integer;
+begin
+  Result := code;
+  if code < 0 then
+    raise EDecompressionError.Create('error');  //!!
+end;
+
+procedure CompressBuf(const InBuf: Pointer; InBytes: Integer;
+                      out OutBuf: Pointer; out OutBytes: Integer);
+var
+  strm: TZStreamRec;
+  P: Pointer;
+begin
+  FillChar(strm, sizeof(strm), 0);
+  OutBytes := ((InBytes + (InBytes div 10) + 12) + 255) and not 255;
+  GetMem(OutBuf, OutBytes);
+  try
+    strm.next_in := InBuf;
+    strm.avail_in := InBytes;
+    strm.next_out := OutBuf;
+    strm.avail_out := OutBytes;
+    CCheck(deflateInit_(strm, Z_BEST_COMPRESSION, zlib_version, sizeof(strm)));
+    try
+      while CCheck(deflate(strm, Z_FINISH)) <> Z_STREAM_END do
+      begin
+        P := OutBuf;
+        Inc(OutBytes, 256);
+        ReallocMem(OutBuf, OutBytes);
+        strm.next_out := PChar(Integer(OutBuf) + (Integer(strm.next_out) - Integer(P)));
+        strm.avail_out := 256;
+      end;
+    finally
+      CCheck(deflateEnd(strm));
+    end;
+    ReallocMem(OutBuf, strm.total_out);
+    OutBytes := strm.total_out;
+  except
+    FreeMem(OutBuf);
+    raise
+  end;
+end;
+
+
+procedure DecompressBuf(const InBuf: Pointer; InBytes: Integer;
+  OutEstimate: Integer; out OutBuf: Pointer; out OutBytes: Integer);
+var
+  strm: TZStreamRec;
+  P: Pointer;
+  BufInc: Integer;
+begin
+  FillChar(strm, sizeof(strm), 0);
+  BufInc := (InBytes + 255) and not 255;
+  if OutEstimate = 0 then
+    OutBytes := BufInc
+  else
+    OutBytes := OutEstimate;
+  GetMem(OutBuf, OutBytes);
+  try
+    strm.next_in := InBuf;
+    strm.avail_in := InBytes;
+    strm.next_out := OutBuf;
+    strm.avail_out := OutBytes;
+    DCheck(inflateInit_(strm, zlib_version, sizeof(strm)));
+    try
+      while DCheck(inflate(strm, Z_FINISH)) <> Z_STREAM_END do
+      begin
+        P := OutBuf;
+        Inc(OutBytes, BufInc);
+        ReallocMem(OutBuf, OutBytes);
+        strm.next_out := PChar(Integer(OutBuf) + (Integer(strm.next_out) - Integer(P)));
+        strm.avail_out := BufInc;
+      end;
+    finally
+      DCheck(inflateEnd(strm));
+    end;
+    ReallocMem(OutBuf, strm.total_out);
+    OutBytes := strm.total_out;
+  except
+    FreeMem(OutBuf);
+    raise
+  end;
+end;
+
+
+// TCustomZlibStream
+
+constructor TCustomZLibStream.Create(Strm: TStream);
+begin
+  inherited Create;
+  FStrm := Strm;
+  FStrmPos := Strm.Position;
+end;
+
+procedure TCustomZLibStream.Progress(Sender: TObject);
+begin
+  if Assigned(FOnProgress) then FOnProgress(Sender);
+end;
+
+
+// TCompressionStream
+
+constructor TCompressionStream.Create(CompressionLevel: TCompressionLevel;
+  Dest: TStream);
+const
+  Levels: array [TCompressionLevel] of ShortInt =
+    (Z_NO_COMPRESSION, Z_BEST_SPEED, Z_DEFAULT_COMPRESSION, Z_BEST_COMPRESSION);
+begin
+  inherited Create(Dest);
+  FZRec.next_out := FBuffer;
+  FZRec.avail_out := sizeof(FBuffer);
+  CCheck(deflateInit_(FZRec, Levels[CompressionLevel], zlib_version, sizeof(FZRec)));
+end;
+
+destructor TCompressionStream.Destroy;
+begin
+  FZRec.next_in := nil;
+  FZRec.avail_in := 0;
+  try
+    if FStrm.Position <> FStrmPos then FStrm.Position := FStrmPos;
+    while (CCheck(deflate(FZRec, Z_FINISH)) <> Z_STREAM_END)
+      and (FZRec.avail_out = 0) do
+    begin
+      FStrm.WriteBuffer(FBuffer, sizeof(FBuffer));
+      FZRec.next_out := FBuffer;
+      FZRec.avail_out := sizeof(FBuffer);
+    end;
+    if FZRec.avail_out < sizeof(FBuffer) then
+      FStrm.WriteBuffer(FBuffer, sizeof(FBuffer) - FZRec.avail_out);
+  finally
+    deflateEnd(FZRec);
+  end;
+  inherited Destroy;
+end;
+
+function TCompressionStream.Read(var Buffer; Count: Longint): Longint;
+begin
+  raise ECompressionError.Create('Invalid stream operation');
+end;
+
+function TCompressionStream.Write(const Buffer; Count: Longint): Longint;
+begin
+  FZRec.next_in := @Buffer;
+  FZRec.avail_in := Count;
+  if FStrm.Position <> FStrmPos then FStrm.Position := FStrmPos;
+  while (FZRec.avail_in > 0) do
+  begin
+    CCheck(deflate(FZRec, 0));
+    if FZRec.avail_out = 0 then
+    begin
+      FStrm.WriteBuffer(FBuffer, sizeof(FBuffer));
+      FZRec.next_out := FBuffer;
+      FZRec.avail_out := sizeof(FBuffer);
+      FStrmPos := FStrm.Position;
+      Progress(Self);
+    end;
+  end;
+  Result := Count;
+end;
+
+function TCompressionStream.Seek(Offset: Longint; Origin: Word): Longint;
+begin
+  if (Offset = 0) and (Origin = soFromCurrent) then
+    Result := FZRec.total_in
+  else
+    raise ECompressionError.Create('Invalid stream operation');
+end;
+
+function TCompressionStream.GetCompressionRate: Single;
+begin
+  if FZRec.total_in = 0 then
+    Result := 0
+  else
+    Result := (1.0 - (FZRec.total_out / FZRec.total_in)) * 100.0;
+end;
+
+
+// TDecompressionStream
+
+constructor TDecompressionStream.Create(Source: TStream);
+begin
+  inherited Create(Source);
+  FZRec.next_in := FBuffer;
+  FZRec.avail_in := 0;
+  DCheck(inflateInit_(FZRec, zlib_version, sizeof(FZRec)));
+end;
+
+destructor TDecompressionStream.Destroy;
+begin
+  inflateEnd(FZRec);
+  inherited Destroy;
+end;
+
+function TDecompressionStream.Read(var Buffer; Count: Longint): Longint;
+begin
+  FZRec.next_out := @Buffer;
+  FZRec.avail_out := Count;
+  if FStrm.Position <> FStrmPos then FStrm.Position := FStrmPos;
+  while (FZRec.avail_out > 0) do
+  begin
+    if FZRec.avail_in = 0 then
+    begin
+      FZRec.avail_in := FStrm.Read(FBuffer, sizeof(FBuffer));
+      if FZRec.avail_in = 0 then
+        begin
+          Result := Count - FZRec.avail_out;
+          Exit;
+        end;
+      FZRec.next_in := FBuffer;
+      FStrmPos := FStrm.Position;
+      Progress(Self);
+    end;
+    DCheck(inflate(FZRec, 0));
+  end;
+  Result := Count;
+end;
+
+function TDecompressionStream.Write(const Buffer; Count: Longint): Longint;
+begin
+  raise EDecompressionError.Create('Invalid stream operation');
+end;
+
+function TDecompressionStream.Seek(Offset: Longint; Origin: Word): Longint;
+var
+  I: Integer;
+  Buf: array [0..4095] of Char;
+begin
+  if (Offset = 0) and (Origin = soFromBeginning) then
+  begin
+    DCheck(inflateReset(FZRec));
+    FZRec.next_in := FBuffer;
+    FZRec.avail_in := 0;
+    FStrm.Position := 0;
+    FStrmPos := 0;
+  end
+  else if ( (Offset >= 0) and (Origin = soFromCurrent)) or
+          ( ((Offset - FZRec.total_out) > 0) and (Origin = soFromBeginning)) then
+  begin
+    if Origin = soFromBeginning then Dec(Offset, FZRec.total_out);
+    if Offset > 0 then
+    begin
+      for I := 1 to Offset div sizeof(Buf) do
+        ReadBuffer(Buf, sizeof(Buf));
+      ReadBuffer(Buf, Offset mod sizeof(Buf));
+    end;
+  end
+  else
+    raise EDecompressionError.Create('Invalid stream operation');
+  Result := FZRec.total_out;
+end;
+
+end.
diff --git a/zlib/contrib/delphi2/zlib32.bpr b/zlib/contrib/delphi2/zlib32.bpr
new file mode 100644
index 0000000..cabcec4
--- /dev/null
+++ b/zlib/contrib/delphi2/zlib32.bpr
@@ -0,0 +1,174 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+
+# ---------------------------------------------------------------------------
+# IDE SECTION
+# ---------------------------------------------------------------------------
+# The following section of the project makefile is managed by the BCB IDE.
+# It is recommended to use the IDE to change any of the values in this
+# section.
+# ---------------------------------------------------------------------------
+
+VERSION = BCB.03
+# ---------------------------------------------------------------------------
+PROJECT = zlib32.dll
+OBJFILES = zlib32.obj adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infblock.obj \
+  infcodes.obj inffast.obj inflate.obj inftrees.obj infutil.obj trees.obj \
+  uncompr.obj zutil.obj
+RESFILES =
+RESDEPEN = $(RESFILES)
+LIBFILES =
+LIBRARIES = 
+SPARELIBS = 
+DEFFILE =
+PACKAGES = VCLX35.bpi VCL35.bpi VCLDB35.bpi VCLDBX35.bpi ibsmp35.bpi bcbsmp35.bpi \
+  dclocx35.bpi QRPT35.bpi TEEUI35.bpi TEEDB35.bpi TEE35.bpi DSS35.bpi \
+  NMFAST35.bpi INETDB35.bpi INET35.bpi VCLMID35.bpi
+# ---------------------------------------------------------------------------
+PATHCPP = .;
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+DEBUGLIBPATH = $(BCB)\lib\debug
+RELEASELIBPATH = $(BCB)\lib\release
+# ---------------------------------------------------------------------------
+CFLAG1 = -WD -O2 -Ve -d -k- -vi -c -tWD
+CFLAG2 = -D_NO_VCL;ZLIB_DLL -I$(BCB)\include
+CFLAG3 = -ff -5
+PFLAGS = -D_NO_VCL;ZLIB_DLL -U$(BCB)\lib;$(RELEASELIBPATH) -I$(BCB)\include -$I- -v \
+  -JPHN -M
+RFLAGS = -D_NO_VCL;ZLIB_DLL -i$(BCB)\include
+AFLAGS = /i$(BCB)\include /d_NO_VCL /dZLIB_DLL /mx /w2 /zn
+LFLAGS = -L$(BCB)\lib;$(RELEASELIBPATH) -aa -Tpd -x -Gi
+IFLAGS = -Gn -g
+# ---------------------------------------------------------------------------
+ALLOBJ = c0d32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES)  import32.lib cw32mt.lib
+# ---------------------------------------------------------------------------
+!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=1
+Locale=1040
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=DLL (GUI)
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=1
+Item0=$(BCB)\include
+
+[HistoryLists\hlLibraryPath]
+Count=1
+Item0=$(BCB)\lib
+
+[HistoryLists\hlConditionals]
+Count=1
+Item0=_NO_VCL;ZLIB_DLL
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+
+!endif
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) $(IFLAGS) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -fo$@ $<
+# ---------------------------------------------------------------------------
diff --git a/zlib/contrib/delphi2/zlib32.cpp b/zlib/contrib/delphi2/zlib32.cpp
new file mode 100644
index 0000000..7372f6b
--- /dev/null
+++ b/zlib/contrib/delphi2/zlib32.cpp
@@ -0,0 +1,42 @@
+
+#include <windows.h>
+#pragma hdrstop
+#include <condefs.h>
+
+
+//---------------------------------------------------------------------------
+//   Important note about DLL memory management in a VCL DLL:
+//
+//
+//
+// If your DLL uses VCL and exports any functions that pass VCL String objects
+// (or structs/classes containing nested Strings) as parameter or function
+// results, you will need to build both your DLL project and any EXE projects
+// that use your DLL with the dynamic RTL (the RTL DLL).  This will change your
+// DLL and its calling EXE's to use BORLNDMM.DLL as their memory manager. In
+// these cases, the file BORLNDMM.DLL should be deployed along with your DLL
+// and the RTL DLL (CP3240MT.DLL). To avoid the requiring BORLNDMM.DLL in
+// these situations, pass string information using "char *" or ShortString
+// parameters and then link with the static RTL.
+//
+//---------------------------------------------------------------------------
+USEUNIT("adler32.c");
+USEUNIT("compress.c");
+USEUNIT("crc32.c");
+USEUNIT("deflate.c");
+USEUNIT("gzio.c");
+USEUNIT("infblock.c");
+USEUNIT("infcodes.c");
+USEUNIT("inffast.c");
+USEUNIT("inflate.c");
+USEUNIT("inftrees.c");
+USEUNIT("infutil.c");
+USEUNIT("trees.c");
+USEUNIT("uncompr.c");
+USEUNIT("zutil.c");
+//---------------------------------------------------------------------------
+#pragma argsused
+int WINAPI DllEntryPoint(HINSTANCE hinst, unsigned long reason, void*)
+{
+        return 1;
+}
-- 
cgit v1.1