aboutsummaryrefslogtreecommitdiff
path: root/libtool.m4
AgeCommit message (Collapse)AuthorFilesLines
2023-11-22Build: fix error in fixinclude configureFrancois-Xavier Coudert1-1/+0
The stray line defining enable_darwin_at_rpath outside of the scope of _LT_DARWIN_LINKER_FEATURES is a mistake and should be removed. It leads to a wrong line in fixincludes/ChangeLog because there is no $1 argument at that point. ChangeLog: * libtool.m4: Fix stray call fixincludes/ChangeLog: * configure: Regenerated.
2023-10-22Config,Darwin: Allow for configuring Darwin to use embedded runpath.Iain Sandoe1-5/+52
Recent Darwin versions place contraints on the use of run paths specified in environment variables. This breaks some assumptions in the GCC build. This change allows the user to configure a Darwin build to use '@rpath/libraryname.dylib' in library names and then to add an embedded runpath to executables (and libraries with dependents). The embedded runpath is added by default unless the user adds '-nodefaultrpaths' to the link line. For an installed compiler, it means that any executable built with that compiler will reference the runtimes installed with the compiler (equivalent to hard-coding the library path into the name of the library). During build-time configurations any "-B" entries will be added to the runpath thus the newly-built libraries will be found by exes. Since the install name is set in libtool, that decision needs to be available here (but might also cause dependent ones in Makefiles, so we need to export a conditional). This facility is not available for Darwin 8 or earlier, however the existing environment variable runpath does work there. We default this on for systems where the external DYLD_LIBRARY_PATH does not work and off for Darwin 8 or earlier. For systems that can use either method, if the value is unset, we use the default (which is currently DYLD_LIBRARY_PATH). ChangeLog: * configure: Regenerate. * configure.ac: Do not add default runpaths to GCC exes when we are building -static-libstdc++/-static-libgcc (the default). * libtool.m4: Add 'enable-darwin-at-runpath'. Act on the enable flag to alter Darwin libraries to use @rpath names. gcc/ChangeLog: * aclocal.m4: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * config/darwin.h: Handle Darwin rpaths. * config/darwin.opt: Handle Darwin rpaths. * Makefile.in: Handle Darwin rpaths. gcc/ada/ChangeLog: * gcc-interface/Makefile.in: Handle Darwin rpaths. gcc/jit/ChangeLog: * Make-lang.in: Handle Darwin rpaths. libatomic/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libbacktrace/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. libgcc/ChangeLog: * config/t-slibgcc-darwin: Generate libgcc_s with an @rpath name. * config.host: Handle Darwin rpaths. libgfortran/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths libgm2/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * libm2cor/Makefile.am: Handle Darwin rpaths. * libm2cor/Makefile.in: Regenerate. * libm2iso/Makefile.am: Handle Darwin rpaths. * libm2iso/Makefile.in: Regenerate. * libm2log/Makefile.am: Handle Darwin rpaths. * libm2log/Makefile.in: Regenerate. * libm2min/Makefile.am: Handle Darwin rpaths. * libm2min/Makefile.in: Regenerate. * libm2pim/Makefile.am: Handle Darwin rpaths. * libm2pim/Makefile.in: Regenerate. libgomp/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths libitm/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libobjc/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libphobos/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * libdruntime/Makefile.am: Handle Darwin rpaths. * libdruntime/Makefile.in: Regenerate. * src/Makefile.am: Handle Darwin rpaths. * src/Makefile.in: Regenerate. libquadmath/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libsanitizer/ChangeLog: * asan/Makefile.am: Handle Darwin rpaths. * asan/Makefile.in: Regenerate. * configure: Regenerate. * hwasan/Makefile.am: Handle Darwin rpaths. * hwasan/Makefile.in: Regenerate. * lsan/Makefile.am: Handle Darwin rpaths. * lsan/Makefile.in: Regenerate. * tsan/Makefile.am: Handle Darwin rpaths. * tsan/Makefile.in: Regenerate. * ubsan/Makefile.am: Handle Darwin rpaths. * ubsan/Makefile.in: Regenerate. libssp/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libstdc++-v3/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * src/Makefile.am: Handle Darwin rpaths. * src/Makefile.in: Regenerate. libvtv/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. lto-plugin/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. zlib/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths.
2023-08-07libtool.m4: augment symcode for Solaris 11Nick Alcock1-1/+1
This reports common symbols like GNU nm, via a type code of 'C'. ChangeLog: * libtool.m4 (lt_cv_sys_global_symbol_pipe): Augment symcode for Solaris 11. gcc/ChangeLog: * configure: Regenerate. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgm2/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. libphobos/ChangeLog: * configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2023-08-07Add support for the haiku operating systemAlexander von Gluck IV1-1/+1
These are the os support patches we have been grooming and maintaining for quite a few years over on git.haiku-os.org. All of these architectures are working and most have been stable for quite some time. ChangeLog: * configure: Regenerate. * configure.ac: Add Haiku to list of ELF OSes * libtool.m4: Update sys_lib_dlsearch_path_spec on Haiku. gcc/ChangeLog: * configure: Regenerate. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgm2/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. libphobos/ChangeLog: * configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2023-08-07libtool.m4: fix the NM="/nm/over/here -B/option/with/path" caseNick Alcock1-5/+11
My previous nm patch handled all cases but one -- if the user set NM in the environment to a path which contained an option, libtool's nm detection tries to run nm against a copy of nm with the options in it: e.g. if NM was set to "nm --blargle", and nm was found in /usr/bin, the test would try to run "/usr/bin/nm --blargle /usr/bin/nm --blargle". This is unlikely to be desirable: in this case we should run "/usr/bin/nm --blargle /usr/bin/nm". Furthermore, as part of this nm has to detect when the passed-in $NM contains a path, and in that case avoid doing a path search itself. This too was thrown off if an option contained something that looked like a path, e.g. NM="nm -B../prev-gcc"; libtool then tries to run "nm -B../prev-gcc nm" which rarely works well (and indeed it looks to see whether that nm exists, finds it doesn't, and wrongly concludes that nm -p or whatever does not work). Fix all of these by clipping all options (defined as everything including and after the first " -") before deciding whether nm contains a path (but not using the clipped value for anything else), and then removing all options from the path-modified nm before looking to see whether that nm existed. NM=my-nm now does a path search and runs e.g. /usr/bin/my-nm -B /usr/bin/my-nm NM=/usr/bin/my-nm now avoids a path search and runs e.g. /usr/bin/my-nm -B /usr/bin/my-nm NM="my-nm -p../wombat" now does a path search and runs e.g. /usr/bin/my-nm -p../wombat -B /usr/bin/my-nm NM="../prev-binutils/new-nm -B../prev-gcc" now avoids a path search: ../prev-binutils/my-nm -B../prev-gcc -B ../prev-binutils/my-nm This seems to be all combinations, including those used by GCC bootstrap (which, before this commit, fails to bootstrap when configured --with-build-config=bootstrap-lto, because the lto plugin is now using --export-symbols-regex, which requires libtool to find a working nm, while also using -B../prev-gcc to point at the lto plugin associated with the GCC just built.) Regenerate all affected configure scripts. ChangeLog: * libtool.m4 (LT_PATH_NM): Handle user-specified NM with options, including options containing paths. gcc/ChangeLog: * configure: Regenerate. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgm2/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. libphobos/ChangeLog: * configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2023-08-07libtool.m4: fix nm BSD flag detectionNick Alcock1-43/+45
Libtool needs to get BSD-format (or MS-format) output out of the system nm, so that it can scan generated object files for symbol names for -export-symbols-regex support. Some nms need specific flags to turn on BSD-formatted output, so libtool checks for this in its AC_PATH_NM. Unfortunately the code to do this has a pair of interlocking flaws: - it runs the test by doing an nm of /dev/null. Some platforms reasonably refuse to do an nm on a device file, but before now this has only been worked around by assuming that the error message has a specific textual form emitted by Tru64 nm, and that getting this error means this is Tru64 nm and that nm -B would work to produce BSD-format output, even though the test never actually got anything but an error message out of nm -B. This is fixable by nm'ing *nm itself* (since we necessarily have a path to it). - the test is entirely skipped if NM is set in the environment, on the grounds that the user has overridden the test: but the user cannot reasonably be expected to know that libtool wants not only nm but also flags forcing BSD-format output. Worse yet, one such "user" is the top-level Cygnus configure script, which neither tests for nor specifies any BSD-format flags. So platforms needing BSD-format flags always fail to set them when run in a Cygnus tree, breaking -export-symbols-regex on such platforms. Libtool also needs to augment $LD on some platforms, but this is done unconditionally, augmenting whatever the user specified: the nm check should do the same. One wrinkle: if the user has overridden $NM, a path might have been provided: so we use the user-specified path if there was one, and otherwise do the path search as usual. (If the nm specified doesn't work, this might lead to a few extra pointless path searches -- but the test is going to fail anyway, so that's not a problem.) (Tested with NM unset, and set to nm, /usr/bin/nm, my-nm where my-nm is a symlink to /usr/bin/nm on the PATH, and /not-on-the-path/my-nm where *that* is a symlink to /usr/bin/nm.) ChangeLog: * libtool.m4 (LT_PATH_NM): Try BSDization flags with a user-provided NM, if there is one. Run nm on itself, not on /dev/null, to avoid errors from nms that refuse to work on non-regular files. Remove other workarounds for this problem. Strip out blank lines from the nm output. fixincludes/ChangeLog: * configure: Regenerate. gcc/ChangeLog: * configure: Regenerate. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgm2/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. libphobos/ChangeLog: * configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2023-08-07GCC: Check if AR works with --plugin and rcH.J. Lu1-1/+8
AR from older binutils doesn't work with --plugin and rc: [hjl@gnu-cfl-2 bin]$ touch foo.c [hjl@gnu-cfl-2 bin]$ ar --plugin /usr/libexec/gcc/x86_64-redhat-linux/10/liblto_plugin.so rc libfoo.a foo.c [hjl@gnu-cfl-2 bin]$ ./ar --plugin /usr/libexec/gcc/x86_64-redhat-linux/10/liblto_plugin.so rc libfoo.a foo.c ./ar: no operation specified [hjl@gnu-cfl-2 bin]$ ./ar --version GNU ar (Linux/GNU Binutils) 2.29.51.0.1.20180112 Copyright (C) 2018 Free Software Foundation, Inc. This program is free software; you may redistribute it under the terms of the GNU General Public License version 3 or (at your option) any later version. This program has absolutely no warranty. [hjl@gnu-cfl-2 bin]$ Check if AR works with --plugin and rc before passing --plugin to AR and RANLIB. ChangeLog: * configure: Regenerated. * libtool.m4 (_LT_CMD_OLD_ARCHIVE): Check if AR works with --plugin and rc before enabling --plugin. config/ChangeLog: * gcc-plugin.m4 (GCC_PLUGIN_OPTION): Check if AR works with --plugin and rc before enabling --plugin. gcc/ChangeLog: * configure: Regenerate. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgm2/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libiberty/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. libphobos/ChangeLog: * configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2023-08-07Sync with binutils: GCC: Pass --plugin to AR and RANLIBH.J. Lu1-1/+24
Sync with binutils for building binutils with LTO: 50ad1254d50 GCC: Pass --plugin to AR and RANLIB Detect GCC LTO plugin. Pass --plugin to AR and RANLIB to support LTO build. ChangeLog: * Makefile.tpl (AR): Add @AR_PLUGIN_OPTION@ (RANLIB): Add @RANLIB_PLUGIN_OPTION@. * configure.ac: Include config/gcc-plugin.m4. AC_SUBST AR_PLUGIN_OPTION and RANLIB_PLUGIN_OPTION. * libtool.m4 (_LT_CMD_OLD_ARCHIVE): Pass --plugin to AR and RANLIB if possible. * Makefile.in: Regenerated. * configure: Likewise. config/ChangeLog: * gcc-plugin.m4 (GCC_PLUGIN_OPTION): New. libiberty/ChangeLog: * Makefile.in (AR): Add @AR_PLUGIN_OPTION@ (RANLIB): Add @RANLIB_PLUGIN_OPTION@. (configure_deps): Depend on ../config/gcc-plugin.m4. * configure.ac: AC_SUBST AR_PLUGIN_OPTION and RANLIB_PLUGIN_OPTION. * aclocal.m4: Regenerated. * configure: Likewise. zlib/ChangeLog: * configure: Regenerated. gcc/ChangeLog: * configure: Regenerate. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgm2/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. libphobos/ChangeLog: * configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate.
2022-10-11Generic configury support for shared libs on VxWorksOlivier Hainque1-2/+27
This change adds the configury bits to activate the build of shared libs on VxWorks ports configured with --enable-shared, for libraries variants where this is generally supported (rtp, code model !large - currently not compatible with -fPIC). Set lt_cv_deplibs_check_method in libtool.m4, so the build of libraries know how to establish dependencies. This is useful in configurations such as aarch64 where proper support of LSE relies on accurate dependency information between libstdc++ and libgcc_s to begin with. Regenerate configure scripts to reflect libtool.m4 change. 2022-10-09 Olivier Hainque <hainque@adacore.com> * libtool.m4 (*vxworks*): When enable_shared, set dynamic_linker and friends for rtp !large. Assume the linker has the required abilities and set lt_cv_deplibs_check_method. gcc/ * config.gcc (*vxworks*): Add t-slibgcc fragment if enable_shared. libgcc/ * config.host (*vxworks*): When enable_shared, add libgcc and crtstuff "shared" fragments for rtp except large code model. (aarch64*-wrs-vxworks7*): Remove t-slibgcc-libgcc from the list of fragments. 2022-10-09 Olivier Hainque <hainque@adacore.com> gcc/ * configure: Regenerate. libatomic/ * configure: Regenerate. libbacktrace/ * configure: Regenerate. libcc1/ * configure: Regenerate. libffi/ * configure: Regenerate. libgfortran/ * configure: Regenerate. libgomp/ * configure: Regenerate. libitm/ * configure: Regenerate. libobjc/ * configure: Regenerate. liboffloadmic/ * configure: Regenerate. liboffloadmic/ * plugin/configure: Regenerate. libphobos/ * configure: Regenerate. libquadmath/ * configure: Regenerate. libsanitizer/ * configure: Regenerate. libssp/ * configure: Regenerate. libstdc++-v3/ * configure: Regenerate. libvtv/ * configure: Regenerate. lto-plugin/ * configure: Regenerate. zlib/ * configure: Regenerate.
2021-12-15Revert "Sync with binutils: GCC: Pass --plugin to AR and RANLIB"H.J. Lu1-24/+1
This reverts commit bf8cdd35117dea2049abbeebcdf14de11b323ef7.
2021-12-15Sync with binutils: GCC: Pass --plugin to AR and RANLIBH.J. Lu1-1/+24
Sync with binutils for building binutils with LTO: 50ad1254d50 GCC: Pass --plugin to AR and RANLIB Detect GCC LTO plugin. Pass --plugin to AR and RANLIB to support LTO build. ChangeLog: * Makefile.tpl (AR): Add @AR_PLUGIN_OPTION@ (RANLIB): Add @RANLIB_PLUGIN_OPTION@. * configure.ac: Include config/gcc-plugin.m4. AC_SUBST AR_PLUGIN_OPTION and RANLIB_PLUGIN_OPTION. * libtool.m4 (_LT_CMD_OLD_ARCHIVE): Pass --plugin to AR and RANLIB if possible. * Makefile.in: Regenerated. * configure: Likewise. config/ * gcc-plugin.m4 (GCC_PLUGIN_OPTION): New. libiberty/ * Makefile.in (AR): Add @AR_PLUGIN_OPTION@ (RANLIB): Add @RANLIB_PLUGIN_OPTION@. (configure_deps): Depend on ../config/gcc-plugin.m4. * configure.ac: AC_SUBST AR_PLUGIN_OPTION and RANLIB_PLUGIN_OPTION. * aclocal.m4: Regenerated. * configure: Likewise. zlib/ * configure: Regenerated.
2021-01-05Update GNU/Hurd configure supportSamuel Thibault1-11/+1
ChangeLog: * libtool.m4: Match gnu* along other GNU systems. * libgo/config/libtool.m4: Match gnu* along other GNU systems. * libgo/configure: Re-generate. libffi/ * configure: Re-generate. libgomp/ * configure: Re-generate. gcc/ * configure: Re-generate. libatomic/ * configure: Re-generate. libbacktrace/ * configure: Re-generate. libcc1/ * configure: Re-generate. libgfortran/ * configure: Re-generate. libgomp/ * configure: Re-generate. libhsail-rt/ * configure: Re-generate. libitm/ * configure: Re-generate. libobjc/ * configure: Re-generate. liboffloadmic/ * configure: Re-generate. * plugin/configure: Re-generate. libphobos/ * configure: Re-generate. libquadmath/ * configure: Re-generate. libsanitizer/ * configure: Re-generate. libssp/ * configure: Re-generate. libstdc++-v3/ * configure: Re-generate. libvtv/ * configure: Re-generate. lto-plugin/ * configure: Re-generate. zlib/ * configure: Re-generate.
2020-12-05Darwin : Update libtool and dependencies for Darwin20 [PR97865]Iain Sandoe1-15/+17
The change in major version (and the increment from Darwin19 to 20) caused libtool tests to fail which resulted in incorrect build settings for shared libraries. We take this opportunity to sort out the shared undefined symbols state rather than propagating the current unsound behaviour into a new rev. This change means that we default to the case that missing symbols are considered an error, and if one wants to allow this intentionally, the confiuration for that case should be set appropriately. Three existing cases need undefined dynamic lookup: libitm, where there is already a configuration mechanism to add the flags. libcc1, where we add simple configuration to add the flags for Darwin. libsanitizer, where we can add to the existing extra flags. libcc1/ChangeLog: PR target/97865 * Makefile.am: Add dynamic_lookup to LD flags for Darwin. * configure.ac: Test for Darwin host and set a flag. * Makefile.in: Regenerate. * configure: Regenerate. libitm/ChangeLog: PR target/97865 * configure.tgt: Add dynamic_lookup to XLDFLAGS for Darwin. * configure: Regenerate. libsanitizer/ChangeLog: PR target/97865 * configure.tgt: Add dynamic_lookup to EXTRA_CXXFLAGS for Darwin. * configure: Regenerate. ChangeLog: PR target/97865 * libtool.m4: Update handling of Darwin platform link flags for Darwin20. gcc/ChangeLog: PR target/97865 * configure: Regenerate. libatomic/ChangeLog: PR target/97865 * configure: Regenerate. libbacktrace/ChangeLog: PR target/97865 * configure: Regenerate. libffi/ChangeLog: PR target/97865 * configure: Regenerate. libgfortran/ChangeLog: PR target/97865 * configure: Regenerate. libgomp/ChangeLog: PR target/97865 * configure: Regenerate. libhsail-rt/ChangeLog: PR target/97865 * configure: Regenerate. libobjc/ChangeLog: PR target/97865 * configure: Regenerate. libphobos/ChangeLog: PR target/97865 * configure: Regenerate. libquadmath/ChangeLog: PR target/97865 * configure: Regenerate. libssp/ChangeLog: PR target/97865 * configure: Regenerate. libstdc++-v3/ChangeLog: PR target/97865 * configure: Regenerate. libvtv/ChangeLog: PR target/97865 * configure: Regenerate. zlib/ChangeLog: PR target/97865 * configure: Regenerate.
2020-11-29Fix hppa64-hpux11 build to remove source paths from embedded path.John David Anglin1-4/+4
This change adds the +nodefaultrpath ld option to remove all library paths that were specified with the -L option from the embedded path. 2020-11-29 John David Anglin <danglin@gcc.gnu.org> ChangeLog: * libtool.m4 (archive_cmds): Add +nodefaultrpath ld option on hppa64-*-hpux11*. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libhsail-rt/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. liboffloadmic/ChangeLog: * configure: Regenerate. * plugin/configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2019-09-10[ARM/FDPIC v6 02/24] [ARM] FDPIC: Handle arm*-*-uclinuxfdpiceabi in ↵Christophe Lyon1-3/+8
configure scripts The new arm-uclinuxfdpiceabi target behaves pretty much like arm-linux-gnueabi. In order to enable the same set of features, we have to update several configure scripts that generally match targets like *-*-linux*: in most places, we add *-uclinux* where there is already *-linux*, or uclinux* when there is already linux*. In gcc/config.gcc and libgcc/config.host we use *-*-uclinuxfdpiceabi because there is already a different behaviour for *-*uclinux* target. In libtool.m4, we use uclinuxfdpiceabi in cases where ELF shared libraries support is required, as uclinux does not guarantee that. 2019-09-10 Christophe Lyon <christophe.lyon@st.com> config/ * futex.m4: Handle *-uclinux*. * tls.m4 (GCC_CHECK_TLS): Likewise. gcc/ * config.gcc: Handle *-*-uclinuxfdpiceabi. libatomic/ * configure.tgt: Handle arm*-*-uclinux*. * configure: Regenerate. libgcc/ * config.host: Handle *-*-uclinuxfdpiceabi. libitm/ * configure.tgt: Handle *-*-uclinux*. * configure: Regenerate. * libtool.m4: Handle uclinuxfdpiceabi. From-SVN: r275564
2018-10-31Update GCC to autoconf 2.69, automake 1.15.1 (PR bootstrap/82856).Joseph Myers1-2/+2
This patch updates GCC to use autoconf 2.69 and automake 1.15.1. (That's not the latest automake version, but it's the one used by binutils-gdb, with which consistency is desirable, and in any case seems a useful incremental update that should make a future update to 1.16.1 easier.) The changes are generally similar to the binutils-gdb ones, and are copied from there where shared files and directories are involved (there are some further changes to such shared directories, however, which I'd expect to apply to binutils-gdb once this patch is in GCC). Largely, obsolete AC_PREREQ calls are removed, while many AC_LANG_SOURCE calls are added to avoid warnings from aclocal and autoconf. Multilib support is no longer included in core automake, meaning that multilib.am needs copying from automake's contrib directory into the GCC source tree. Autoconf 2.69 has Go support, so local copies of that support are removed. I hope the D support will soon be submitted to upstream autoconf so the local copy of that can be removed in a future update. Changes to how automake generates runtest calls mean quotes are removed from RUNTEST definitions in five lib*/testsuite/Makefile.am files (libatomic, libgomp, libitm, libphobos, libvtv; some others have RUNTEST definitions without quotes, which are still OK); libgo and libphobos also get -Wno-override added to AM_INIT_AUTOMAKE so those overrides of RUNTEST do not generate automake warnings. Note that the regeneration did not include regeneration of fixincludes/config.h.in (attempting such regeneration resulted in all the USED_FOR_TARGET conditionals disappearing; and I don't see anything in the fixincludes/ directory that would result in such conditionals being generated, unlike in the gcc/ directory). Also note that libvtv/testsuite/other-tests/Makefile.in was not regenerated; that directory is not listed as a subdirectory for which Makefile.in gets regenerated by calling "automake" in libvtv/, so I'm not sure how it's meant to be regenerated. While I mostly fixed warnings should running aclocal / automake / autoconf, there were various such warnings from automake in the libgfortran, libgo, libgomp, liboffloadmic, libsanitizer, libphobos directories that I did not fix, preferring to leave those to the relevant subsystem maintainers. Specifically, most of those warnings were of the following form (example from libgfortran): Makefile.am:48: warning: source file 'caf/single.c' is in a subdirectory, Makefile.am:48: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. I think it's best for the relevant maintainers to add subdir-objects and do any other associated Makefile.am changes needed. In some cases the paths in the warnings involved ../; I don't know if that adds any extra complications to the use of subdir-objects. I've tested this with native, cross and Canadian cross builds. The risk of any OS-specific issues should I hope be rather lower than if a libtool upgrade were included (we *should* do such an upgrade at some point, but it's more complicated - it involves identifying all our local libtool changes to see if any aren't included in the upstream version we update to, and reverting an upstream libtool patch that's inappropriate for use in GCC); I think it would be better to get this update into GCC so that people can test in different configurations and we can fix any issues found, rather than to try to get more and more testing done before it goes in. top level: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * multilib.am: New file. From automake. Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * libtool.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE. * ar-lib: New file. * test-driver: New file. * configure: Re-generate. config: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * math.m4, tls.m4: Use AC_LANG_SOURCE. Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69. fixincludes: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * aclocal.m4, configure: Regenerate. gcc: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use single line for second argument of AC_DEFINE_UNQUOTED. * doc/install.texi (Tools/packages necessary for modifying GCC): Update to autoconf 2.69 and automake 1.15.1. * aclocal.m4, config.in, configure: Regenerate. gnattools: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * configure: Regenerate. gotools: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * config/go.m4: Remove file. * Makefile.am (ACLOCAL_AMFLAGS): Do not use -I ./config. * configure.ac: Remove AC_PREREQ. Do not include config/go.m4. * Makefile.in, aclocal.m4, configure: Regenerate. intl: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ. * configure: Re-generate. * config.h.in: Re-generate. * aclocal.m4: Re-generate. libada: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * configure: Regenerate. libatomic: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * acinclude.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ. * testsuite/Makefile.am (RUNTEST): Remove quotes. * Makefile.in, aclocal.m4, configure, testsuite/Makefile.in: Regenerate. libbacktrace: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. * Makefile.in, aclocal.m4, config.h.in, configure: Regenerate. libcc1: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, configure: Regenerate. libcpp: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. * aclocal.m4, config.in, configure: Regenerate. libdecnumber: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * aclocal.m4. libffi: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. (AUTOMAKE_OPTIONS): Add info-in-builddir. (CLEANFILES): Remove doc/libffi.info. * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, configure, fficonfig.h.in, include/Makefile.in, man/Makefile.in, testsuite/Makefile.in: Regenerate. libgcc: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. * configure: Regenerate. libgfortran: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, config.h.in, configure: Regenerate. libgo [logically part of this change but omitted from the commit]: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * config/go.m4: Remove file. * config/libtool.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use -Wno-override in AM_INIT_AUTOMAKE call. * Makefile.in, aclocal.m4, configure, testsuite/Makefile.in: Regenerate. libgomp: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am (AUTOMAKE_OPTIONS): Add info-in-builddir. (CLEANFILES): Remove libgomp.info. * configure.ac: Remove AC_PREREQ. * testsuite/Makefile.am (RUNTEST): Remove quotes. * Makefile.in, aclocal.m4, configure, testsuite/Makefile.in: Regenerate. libhsail-rt: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, configure: Regenerate. libiberty: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * config.in: Re-generate. libitm: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. (AUTOMAKE_OPTIONS): Add info-in-builddir. (CLEANFILES): Remove libitm.info. * configure.ac: Remove AC_PREREQ. * testsuite/Makefile.am (RUNTEST): Remove quotes. * Makefile.in, aclocal.m4, configure, testsuite/Makefile.in: Regenerate. libobjc: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * aclocal.m4, config.h.in, configure: Regenerate. liboffloadmic: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. * plugin/Makefile.am: Include multilib.am. * plugin/configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, configure, plugin/Makefile.in, plugin/aclocal.m4, plugin/configure: Regenerate. libphobos: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. Use -Wno-override in AM_INIT_AUTOMAKE call. * m4/autoconf.m4: Add extra argument to AC_LANG_DEFINE call. * m4/druntime/os.m4: Use AC_LANG_SOURCE. * testsuite/Makefile.am (RUNTEST): Remove quotes. * Makefile.in, aclocal.m4, configure, libdruntime/Makefile.in, src/Makefile.in, testsuite/Makefile.in: Regenerate. libquadmath: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. (AUTOMAKE_OPTIONS): Remove 1.8. Add info-in-builddir. (all-local): Define outside conditional code. (CLEANFILES): Remove libquadmath.info. * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, config.h.in, configure: Regenerate. libsanitizer: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. * Makefile.in, aclocal.m4, asan/Makefile.in, configure, interception/Makefile.in, libbacktrace/Makefile.in, lsan/Makefile.in, sanitizer_common/Makefile.in, tsan/Makefile.in, ubsan/Makefile.in: Regenerate. libssp: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. (AUTOMAKE_OPTIONS): Remove 1.9.5. * configure.ac: Remove AC_PREREQ. Quote argument to AC_RUN_IFELSE. * Makefile.in, aclocal.m4, configure: Regenerate. libstdc++-v3: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, configure, doc/Makefile.in, include/Makefile.in, libsupc++/Makefile.in, po/Makefile.in, python/Makefile.in, src/Makefile.in, src/c++11/Makefile.in, src/c++17/Makefile.in, src/c++98/Makefile.in, src/filesystem/Makefile.in, testsuite/Makefile.in: Regenerate. libvtv: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. * testsuite/Makefile.am (RUNTEST): Remove quotes. * Makefile.in, aclocal.m4, configure, testsuite/Makefile.in: Regenerate. lto-plugin: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. * Makefile.in, aclocal.m4, config.h.in, configure: Regenerate. zlib: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * configure.ac: Modernize AC_INIT call, remove AC_PREREQ. * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. From-SVN: r265695
2018-07-05libtool.m4: Sort output of 'find' to enable deterministic builds.Bernhard M. Wiedemann1-4/+4
* libtool.m4: Sort output of 'find' to enable deterministic builds. * ltmain.sh: Likewise. From-SVN: r262451
2015-11-26* libtool.m4 (export_symbols_cmds) [AIX]: Add global TLS "L" symbols.David Edelsohn1-2/+2
From-SVN: r230948
2014-11-21Always use PIC option with -shared in libtoolH.J. Lu1-3/+3
Libtool needs to pass PIC option -shared when creating shared object to link regular object files with slim-lto archive. PR bootstrap/63784 * libtool.m4: Add $pic_flag with -shared. boehm-gc/ PR bootstrap/63784 * configure: Regenerated. gcc/ PR bootstrap/63784 * configure: Regenerated. libatomic/ PR bootstrap/63784 * configure: Regenerated. libbacktrace/ PR bootstrap/63784 * configure: Regenerated. libcc1/ PR bootstrap/63784 * configure: Regenerated. libcilkrts/ PR bootstrap/63784 * configure: Regenerated. libffi/ PR bootstrap/63784 * configure: Regenerated. libgfortran/ PR bootstrap/63784 * configure: Regenerated. libgomp/ PR bootstrap/63784 * configure: Regenerated. libitm/ PR bootstrap/63784 * configure: Regenerated. libjava/ PR bootstrap/63784 * configure: Regenerated. libjava/classpath/ PR bootstrap/63784 * configure: Regenerated. libobjc/ PR bootstrap/63784 * configure: Regenerated. libquadmath/ PR bootstrap/63784 * configure: Regenerated. libsanitizer/ PR bootstrap/63784 * configure: Regenerated. libssp/ PR bootstrap/63784 * configure: Regenerated. libstdc++-v3/ PR bootstrap/63784 * configure: Regenerated. libvtv/ PR bootstrap/63784 * configure: Regenerated. lto-plugin/ PR bootstrap/63784 * configure: Regenerated. From-SVN: r217937
2014-11-11re PR target/63610 (Fixing the libtool bug for Yosemite (darwin14))Francois-Xavier Coudert1-1/+1
toplevel: 2014-11-11 Francois-Xavier Coudert <fxcoudert@gcc.gnu.org> PR target/63610 * libtool.m4: Fix globbing of darwin versions. boehm-gc/ 2014-11-11 Francois-Xavier Coudert <fxcoudert@gcc.gnu.org> PR target/63610 * configure: Regenerate. gcc/ 2014-11-11 Francois-Xavier Coudert <fxcoudert@gcc.gnu.org> PR target/63610 * configure: Regenerate. libatomic/ 2014-11-11 Francois-Xavier Coudert <fxcoudert@gcc.gnu.org> PR target/63610 * configure: Regenerate. libbacktrace/ 2014-11-11 Francois-Xavier Coudert <fxcoudert@gcc.gnu.org> PR target/63610 * configure: Regenerate. libcc1/ 2014-11-11 Francois-Xavier Coudert <fxcoudert@gcc.gnu.org> PR target/63610 * configure: Regenerate. libcilkrts/ 2014-11-11 Francois-Xavier Coudert <fxcoudert@gcc.gnu.org> PR target/63610 * configure: Regenerate. libffi/ 2014-11-11 Francois-Xavier Coudert <fxcoudert@gcc.gnu.org> PR target/63610 * configure: Regenerate. libgfortran/ 2014-11-11 Francois-Xavier Coudert <fxcoudert@gcc.gnu.org> PR target/63610 * configure: Regenerate. libgomp/ 2014-11-11 Francois-Xavier Coudert <fxcoudert@gcc.gnu.org> PR target/63610 * configure: Regenerate. libitm/ 2014-11-11 Francois-Xavier Coudert <fxcoudert@gcc.gnu.org> PR target/63610 * configure: Regenerate. libobjc/ 2014-11-11 Francois-Xavier Coudert <fxcoudert@gcc.gnu.org> PR target/63610 * configure: Regenerate. libquadmath/ 2014-11-11 Francois-Xavier Coudert <fxcoudert@gcc.gnu.org> PR target/63610 * configure: Regenerate. libsanitizer/ 2014-11-11 Francois-Xavier Coudert <fxcoudert@gcc.gnu.org> PR target/63610 * configure: Regenerate. libssp/ 2014-11-11 Francois-Xavier Coudert <fxcoudert@gcc.gnu.org> PR target/63610 * configure: Regenerate. libstdc++-v3/ 2014-11-11 Francois-Xavier Coudert <fxcoudert@gcc.gnu.org> PR target/63610 * configure: Regenerate. libvtv/ 2014-11-11 Francois-Xavier Coudert <fxcoudert@gcc.gnu.org> PR target/63610 * configure: Regenerate. lto-plugin/ 2014-11-11 Francois-Xavier Coudert <fxcoudert@gcc.gnu.org> PR target/63610 * configure: Regenerate. libjava/ 2014-11-11 Francois-Xavier Coudert <fxcoudert@gcc.gnu.org> PR target/63610 * configure: Regenerate. libjava/classpath/ 2014-11-11 Francois-Xavier Coudert <fxcoudert@gcc.gnu.org> PR target/63610 * configure: Regenerate. zlib/ 2014-11-11 Francois-Xavier Coudert <fxcoudert@gcc.gnu.org> PR target/63610 * configure: Regenerate. From-SVN: r217366
2013-09-20libtool.m4 (_LT_ENABLE_LOCK <ld -m flags>): Remove non-canonical ppc host match.Alan Modra1-3/+9
* libtool.m4 (_LT_ENABLE_LOCK <ld -m flags>): Remove non-canonical ppc host match. Support little-endian powerpc linux hosts. Regenerate configure throughout. From-SVN: r202773
2012-09-14re PR bootstrap/38607 (AIX error messages about TOC during build)David Edelsohn1-0/+2
PR target/38607 Merge upstream change. * libtool.m4 (_LT_COMPILER_PIC): Add -fPIC to GCC and GXX for AIX. * configure.ac: Add target-libquadmath to noconfigdirs for AIX. Add libgomp*.o to compare_exclusions for AIX. * configure: Regenerate. From-SVN: r191316
2012-05-15Add x32 support to libtool.m4H.J. Lu1-1/+8
Merge upstream change * libtool.m4 (_LT_ENABLE_LOCK): Support x32. From-SVN: r187546
2011-11-21Additional fixes for FreeBSD-10 build:Andreas Tobler1-4/+4
/: * libtool.m4: Additional FreeBSD 10 fixes. boehm-gc/: * configure: Regenerate. gcc/: * configure: Regenerate. libffi/: * configure: Regenerate. libgfortran/: * configure: Regenerate. libgomp/: * configure: Regenerate. libitm/: * configure: Regenerate. libjava/: * configure.ac: Fix some more FreeBSD 10 issues.. * configure: Regenerate. libjava/libltdl/: * acinclude.m4: Additional FreeBSD 10 fixes. * configure: Regenerate. libmudflap/: * configure: Regenerate. libobjc/: * configure: Regenerate. libquadmath/: * configure: Regenerate. libssp/: * configure: Regenerate. libstdc++-v3/: * configure: Regenerate. lto-plugin/: * configure: Regenerate. zlib/: * configure: Regenerate. From-SVN: r181593
2011-02-13Remove freebsd1 from libtool.m4 macros and config.rpath.Ralf Wildenhues1-8/+0
/: Import from Libtool and gnulib: 2011-01-27 Gerald Pfeifer <gerald@pfeifer.com> Prepare for supporting FreeBSD 10. * config.rpath: Remove handling of freebsd1* which soon would match FreeBSD 10.0. 2011-01-20 Gerald Pfeifer <gerald@pfeifer.com> (tiny change) Remove support for FreeBSD 1.x. * libtool.m4 (_LT_LINKER_SHLIBS) (_LT_SYS_DYNAMIC_LINKER): Remove handling of freebsd1* which soon would incorrectly match FreeBSD 10.0. boehm-gc/: * configure: Regenerate. gcc/: * configure: Regenerate. libffi/: * configure: Regenerate. libgfortran/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * configure: Likewise. libgo/: * config/libtool.m4: (_LT_LINKER_SHLIBS) (_LT_SYS_DYNAMIC_LINKER): Remove handling of freebsd1* which soon would incorrectly match FreeBSD 10.0. * configure: Regenerate. libgomp/: * configure: Regenerate. libjava/: * configure: Regenerate. * shlibpath.m4 (AC_LIBTOOL_SYS_DYNAMIC_LINKER): Remove handling of freebsd1* which soon would incorrectly match FreeBSD 10.0. libjava/classpath/: * config.rpath, ltcf-c.sh, ltcf-gcj.sh, ltconfig: Remove handling of freebsd1* which soon would match FreeBSD 10.0. * configure: Regenerate. libjava/libltdl/: * acinclude.m4 (AC_LIBTOOL_PROG_LD_SHLIBS) (AC_LIBTOOL_SYS_DYNAMIC_LINKER): Remove handling of freebsd1* which soon would incorrectly match FreeBSD 10.0. * configure: Regenerate. libmudflap/: * configure: Regenerate. libobjc/: * configure: Regenerate. libquadmath/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * configure: Likewise. libssp/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * configure: Likewise. libstdc++-v3/: * configure: Regenerate. lto-plugin/: * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. zlib/: * configure: Regenerate. From-SVN: r170106
2009-12-05Sync from git Libtool and regenerate.Ralf Wildenhues1-401/+469
/: PR target/38384 PR bootstrap/40972 * libtool.m4: Sync from git Libtool. * ltoptions.m4: Likewise. * ltversion.m4: Likewise. * lt~obsolete.m4: Likewise. * ltmain.sh: Likewise. boehm-gc/: * Makefile.in: Regenerate. * configure: Regenerate. * include/Makefile.in: Regenerate. fixincludes/: * configure: Regenerate. gcc/: * configure: Regenerate. libffi/: * Makefile.in: Regenerate. * configure: Regenerate. * include/Makefile.in: Regenerate. * man/Makefile.in: Regenerate. * testsuite/Makefile.in: Regenerate. libgfortran/: * Makefile.in: Regenerate. * configure: Regenerate. libgomp/: * Makefile.in: Regenerate. * configure: Regenerate. * testsuite/Makefile.in: Regenerate. libjava/classpath/: * Makefile.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. * doc/api/Makefile.in: Regenerate. * examples/Makefile.in: Regenerate. * external/Makefile.in: Regenerate. * external/jsr166/Makefile.in: Regenerate. * external/relaxngDatatype/Makefile.in: Regenerate. * external/sax/Makefile.in: Regenerate. * external/w3c_dom/Makefile.in: Regenerate. * include/Makefile.in: Regenerate. * lib/Makefile.in: Regenerate. * native/Makefile.in: Regenerate. * native/fdlibm/Makefile.in: Regenerate. * native/jawt/Makefile.in: Regenerate. * native/jni/Makefile.in: Regenerate. * native/jni/classpath/Makefile.in: Regenerate. * native/jni/gconf-peer/Makefile.in: Regenerate. * native/jni/gstreamer-peer/Makefile.in: Regenerate. * native/jni/gtk-peer/Makefile.in: Regenerate. * native/jni/java-io/Makefile.in: Regenerate. * native/jni/java-lang/Makefile.in: Regenerate. * native/jni/java-math/Makefile.in: Regenerate. * native/jni/java-net/Makefile.in: Regenerate. * native/jni/java-nio/Makefile.in: Regenerate. * native/jni/java-util/Makefile.in: Regenerate. * native/jni/midi-alsa/Makefile.in: Regenerate. * native/jni/midi-dssi/Makefile.in: Regenerate. * native/jni/native-lib/Makefile.in: Regenerate. * native/jni/qt-peer/Makefile.in: Regenerate. * native/jni/xmlj/Makefile.in: Regenerate. * native/plugin/Makefile.in: Regenerate. * resource/Makefile.in: Regenerate. * scripts/Makefile.in: Regenerate. * tools/Makefile.in: Regenerate. libjava/: * Makefile.in: Regenerate. * configure: Regenerate. * gcj/Makefile.in: Regenerate. * include/Makefile.in: Regenerate. * testsuite/Makefile.in: Regenerate. libmudflap/: * Makefile.in: Regenerate. * configure: Regenerate. * testsuite/Makefile.in: Regenerate. libobjc/: * configure: Regenerate. libssp/: * Makefile.in: Regenerate. * configure: Regenerate. libstdc++-v3/: * Makefile.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. * include/Makefile.in: Regenerate. * libsupc++/Makefile.in: Regenerate. * po/Makefile.in: Regenerate. * python/Makefile.in: Regenerate. * src/Makefile.in: Regenerate. * testsuite/Makefile.in: Regenerate. lto-plugin/: * configure: Regenerate. * Makefile.in: Regenerate. zlib/: * Makefile.in: Regenerate. * configure: Regenerate. From-SVN: r155012
2009-09-08libtool.m4 (output_verbose_link_cmd): Require leading blank, and blank ↵Alexandre Oliva1-6/+6
before -L. ChangeLog: * libtool.m4 (output_verbose_link_cmd): Require leading blank, and blank before -L. gcc/ChangeLog: * configure: Rebuilt with modified libtool.m4. libstdc++-v3/ChangeLog: * configure: Rebuilt with modified libtool.m4. boehm-gc/ChangeLog: * configure: Rebuilt with modified libtool.m4. libjava/ChangeLog: * configure: Rebuilt with modified libtool.m4. From-SVN: r151522
2009-03-01backport: Support GNU/kOpenSolaris.Ralf Wildenhues1-6/+6
Backport from git Libtool: 2009-01-19 Robert Millan <rmh@aybabtu.com> Support GNU/kOpenSolaris. * libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER) (_LT_CHECK_MAGIC_METHOD, _LT_COMPILER_PIC, _LT_LINKER_SHLIBS) (_LT_LANG_CXX_CONFIG) [kopensolaris*-gnu]: Recognize GNU/kOpenSolaris. libjava/classpath/ * configure: Regenerate. libjava/ * configure: Regenerate. libssp/ * configure: Regenerate. libobjc/ * configure: Regenerate. libstdc++-v3/ * configure: Regenerate. libgfortran/ * configure: Regenerate. boehm-gc/ * configure: Regenerate. gcc/ * configure: Regenerate. libmudflap/ * configure: Regenerate. zlib/ * configure: Regenerate. libffi/ * configure: Regenerate. libgomp/ * configure: Regenerate. From-SVN: r144527
2008-12-18Backport from upstream Libtool:Ralf Wildenhues1-39/+46
* libltdl.m4 (_LT_SYS_DYNAMIC_LINKER) (_LT_LINKER_SHLIBS): Add cache variables to tests that require the linker to work. For shlibpath_overrides_runpath, this also changes the semantics to let the result from the C compiler take precedence. boehm-gc/ * configure: Regenerate. fixincludes/ * configure: Regenerate. gcc/ * configure: Regenerate. libffi/ * configure: Regenerate. libgfortran/ * configure: Regenerate. libgomp/ * configure: Regenerate. libjava/classpath/ * configure: Regenerate. libjava/ * configure: Regenerate. libmudflap/ * configure: Regenerate. libobjc/ * configure: Regenerate. libssp/ * configure: Regenerate. libstdc++-v3/ * configure: Regenerate. zlib/ * configure: Regenerate. From-SVN: r142817
2008-09-26libtool.m4: Update to libtool 2.2.6.Peter O'Gorman1-331/+529
* libtool.m4: Update to libtool 2.2.6. * lt~obsolete.m4: Update to libtool 2.2.6. * ltmain.sh: Update to libtool 2.2.6. * ltsugar.m4: Update to libtool 2.2.6. * ltversion.m4: Update to libtool 2.2.6. * ltoptions.m4: Update to libtool 2.2.6. * ltgcc.m4: Update to match changes from libtool 2.2.6. From-SVN: r140698
2008-03-16backport: Deal with Autoconf 2.62's semantic change in m4_append.Ralf Wildenhues1-1/+1
2008-03-16 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> Backport from upstream Libtool: 2007-10-12 Eric Blake <ebb9@byu.net> Deal with Autoconf 2.62's semantic change in m4_append. * ltsugar.m4 (lt_append): Replace broken versions of m4_append. (lt_if_append_uniq): Don't require separator to be overquoted, and avoid broken m4_append. (lt_dict_add): Fix typo. * libtool.m4 (_LT_DECL): Don't overquote separator. From-SVN: r133267
2008-02-16re PR libgcj/33085 (liblt_prog_compiler_pic_GCJ='-DDLL_EXPORT' is wrong)Ralf Wildenhues1-3/+6
PR libgcj/33085 * libtool.m4 (_LT_COMPILER_PIC) [ mingw, cygwin ] <GCJ>: Do not use -DDLL_EXPORT. Backport from upstream. libjava/ PR libgcj/33085 * configure: Regenerate. From-SVN: r132362
2008-01-24* libtool.m4: Backport AIX 6 support from ToT Libtool.David Edelsohn1-12/+12
From-SVN: r131783
2007-06-01libtool.m4 (LT_CMD_MAX_LEN): Try using getconf to set lt_cv_sys_max_cmd_len.Steve Ellcey1-23/+29
2007-06-01 Steve Ellcey <sje@cup.hp.com> * libltdl/m4/libtool.m4 (LT_CMD_MAX_LEN): Try using getconf to set lt_cv_sys_max_cmd_len. From-SVN: r125262
2007-05-31[multiple changes]Paolo Bonzini1-7/+3
2003-05-31 Paolo Bonzini <bonzini@gnu.org> PR libjava/32098 * libtool.m4: Revert previous change. * ltgcc.m4: Put it here. libjava: 2007-05-31 Paolo Bonzini <bonzini@gnu.org> PR libjava/32098 * configure: Regenerated. * aclocal.m4: Regenerated. From-SVN: r125215
2007-05-30re PR java/32098 (New libtool doesn't support libjava)H.J. Lu1-3/+7
2007-05-30 H.J. Lu <hongjiu.lu@intel.com> PR libjava/32098 * libtool.m4 (_LT_LANG_GCJ_CONFIG): Use gcc to test gcj features. From-SVN: r125193
2007-05-24ltmain.sh: Update from ToT Libtool.Steve Ellcey1-611/+6769
* ltmain.sh: Update from ToT Libtool. * libtool.m4: Update from ToT Libtool. * ltsugar.m4: New. Update from ToT Libtool. * ltversion.m4: New. Update from ToT Libtool. * ltoptions.m4: New. Update from ToT Libtool. * ltconfig: Remove. * ltcf-c.sh: Remove. * ltcf-cxx.sh: Remove. * ltcf-gcj.sh: Remove. * Regenerate all subdirs From-SVN: r125032
2005-07-16all files: Update FSF address.Kelley Cook1-1/+1
2005-07-16 Kelley Cook <kcook@gcc.gnu.org> * all files: Update FSF address. From-SVN: r102083
2005-05-10libtool.m4 (AC_LIBTOOL_SYS_MAX_CMD_LEN): Use quotes on lt_cv_sys_max_cmd_len ↵Mike Stump1-1/+1
for now. * libtool.m4 (AC_LIBTOOL_SYS_MAX_CMD_LEN): Use quotes on lt_cv_sys_max_cmd_len for now. From-SVN: r99495
2005-04-13* libtool.m4: Update AC_LIBTOOL_SYS_MAX_CMD_LEN bits from upstream.Mike Stump1-0/+61
From-SVN: r98064
2005-04-07Revert last patch for more testing.Mike Stump1-81/+0
From-SVN: r97810
2005-04-07* libtool.m4: Update AC_LIBTOOL_SYS_MAX_CMD_LEN bits from upstream.Mike Stump1-0/+81
From-SVN: r97808
2004-11-29libtool.m4 (AC_DEPLIBS_CHECK_METHOD): Re-import linux-gnu case from CVS ↵Kelley Cook1-8/+1
libtool to always pass_all. 2004-11-29 Kelley Cook <kcook@gcc.gnu.org> * libtool.m4 (AC_DEPLIBS_CHECK_METHOD): Re-import linux-gnu case from CVS libtool to always pass_all. * libjava/configure, libffi/configure, libjava/configure, libobjc/configure, boehm-gc/configure: Regenerated. From-SVN: r91495
2004-11-25libtool.m4 (AC_DEPLIBS_CHECK_METHOD): Revert previous change.Kelley Cook1-1/+8
2004-11-24 Kelley Cook <kcook@gcc.gnu.org> * libtool.m4 (AC_DEPLIBS_CHECK_METHOD): Revert previous change. * boehm-gc/configure: Regenerate. * libffi/configure: Regenerate. * libgfortran/configure: Regenerate. * libjava/configure: Regenerate. * libobjc/configure: Regenerate. * libstdc++-v3/configure: Regenerate. * zlib/configure: Regenerate. From-SVN: r91293
2004-11-24libtool.m4 (AC_DEPLIBS_CHECK_METHOD): Import linux-gnu case from CVS libtool ↵Kelley Cook1-8/+1
to always pass_all. 2004-11-24 Kelley Cook <kcook@gcc.gnu.org> * libtool.m4 (AC_DEPLIBS_CHECK_METHOD): Import linux-gnu case from CVS libtool to always pass_all. * boehm-gc/configure: Regenerate. * libffi/configure: Regenerate. * libgfortran/configure: Regenerate. * libjava/configure: Regenerate. * libobjc/configure: Regenerate. * libstdc++-v3/configure: Regenerate. * zlib/configure: Regenerate. From-SVN: r91200
2004-05-18re PR bootstrap/15120 ([3.3 only] [libtool bug] hidden symbol `__sdivsi3_i4' ↵Kaz Kojima1-1/+1
is referenced by DSO) PR bootstrap/15120 * libtool.m4 (lt_cv_deplibs_check_method): Use pass_all on sh*. * */configure: Rebuilt. From-SVN: r81980
2004-04-26Patch from Robert Millan.Robert Millan1-2/+2
Add patches from libtool CVS. * libtool.m4: Add kfreebsd*-gnu and knetbsd*-gnu. * ltconfig: Likewise. * ltcf-c.sh: Likewise. * ltcf-cxx.sh: Likewise. * ltcf-gcj.sh: Likewise. From-SVN: r81213
2003-11-19libtool.m4: Sync darwin bits from libtool cvs to build a gcc with ↵Andreas Tobler1-1/+4
shared/dylibed libraries. 2003-11-19 Andreas Tobler <a.tobler@schweiz.ch> * libtool.m4: Sync darwin bits from libtool cvs to build a gcc with shared/dylibed libraries. * ltmain.sh: Likewise. * ltcf-c.sh: Likewise, disable shared library build for OS-X < 10.3. * ltcf-cxx.sh: Likewise. * ltcf-gcj.sh: Likewise. * ltconfig: Likewise. From-SVN: r73729
2003-09-09* libtool.m4 (LD): Correct powerpc64 host match.Alan Modra1-1/+1
From-SVN: r71229
2003-04-11libtool.m4 (lt_cv_deplibs_check_method): Use pass_all on mips*.Alexandre Oliva1-1/+1
* libtool.m4 (lt_cv_deplibs_check_method): Use pass_all on mips*. * */configure: Rebuilt. From-SVN: r65459
generated by cgit v1.1 at 2024-10-01 03:49:14 +0000