aboutsummaryrefslogtreecommitdiff
path: root/libquadmath/configure.ac
AgeCommit message (Collapse)AuthorFilesLines
2023-12-12libquadmath: Restore linking against -lm on most targets [PR112963]Jakub Jelinek1-0/+14
The r14-4825 change added AC_CHECK_LIBM to libquadmath configure.ac and replaced unconditional linking with -lm with linking with $(LIBM) determined by that. Unfortunately that broke bare metal targets because AC_CHECK_LIBM attempts to link against -lm and this was after (unconditional) GCC_NO_EXECUTABLES. Then r14-4863 partially reverted that change (no longer AC_CHECK_LIBM), but didn't revert the Makefile.am change of -lm to $(LIBM), which had the effect that libquadmath is not linked against -lm on any arch. That is a serious problem though e.g. on Linux, because libquadmath calls a few libm entrypoints and e.g. on powerpc64le the underlinking can cause crashes in IFUNC resolvers of libm. Instead of adding further reversion of the r14-4825 commit and use -lm unconditionally again, this patch adds an AC_CHECK_LIBM like substitutions with the *-ncr-sysv4.3* target handling removed (I think we don't support such targets, especially not in libquadmath) and with the default case replaced by simple using -lm. That is something in between using -lm unconditionally and what AC_CHECK_LIBM does if it would work on bare metal - we know from GCC 13 and earlier that we can link -lm on all targets libquadmath is built for, and just white list a couple of targets which we know don't have separate -lm and don't want to link against that (like Darwin, Cygwin, ...). 2023-12-12 Jakub Jelinek <jakub@redhat.com> PR libquadmath/112963 * configure.ac (LIBM): Readd AC_CHECK_LIBM-like check without doing AC_CHECK_LIB in it. * configure: Regenerated. * Makefile.in: Regenerated.
2023-10-23configure, libquadmath: Remove unintended AC_CHECK_LIBM [PR111928]Iain Sandoe1-2/+0
This was a rebase error, that managed to pass testing on Darwin and Linux (but fails on bare metal). PR libquadmath/111928 libquadmath/ChangeLog: * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Remove AC_CHECK_LIBM. Signed-off-by: Iain Sandoe <iain@sandoe.co.uk>
2023-10-22Config,Darwin: Allow for configuring Darwin to use embedded runpath.Iain Sandoe1-0/+3
Recent Darwin versions place contraints on the use of run paths specified in environment variables. This breaks some assumptions in the GCC build. This change allows the user to configure a Darwin build to use '@rpath/libraryname.dylib' in library names and then to add an embedded runpath to executables (and libraries with dependents). The embedded runpath is added by default unless the user adds '-nodefaultrpaths' to the link line. For an installed compiler, it means that any executable built with that compiler will reference the runtimes installed with the compiler (equivalent to hard-coding the library path into the name of the library). During build-time configurations any "-B" entries will be added to the runpath thus the newly-built libraries will be found by exes. Since the install name is set in libtool, that decision needs to be available here (but might also cause dependent ones in Makefiles, so we need to export a conditional). This facility is not available for Darwin 8 or earlier, however the existing environment variable runpath does work there. We default this on for systems where the external DYLD_LIBRARY_PATH does not work and off for Darwin 8 or earlier. For systems that can use either method, if the value is unset, we use the default (which is currently DYLD_LIBRARY_PATH). ChangeLog: * configure: Regenerate. * configure.ac: Do not add default runpaths to GCC exes when we are building -static-libstdc++/-static-libgcc (the default). * libtool.m4: Add 'enable-darwin-at-runpath'. Act on the enable flag to alter Darwin libraries to use @rpath names. gcc/ChangeLog: * aclocal.m4: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * config/darwin.h: Handle Darwin rpaths. * config/darwin.opt: Handle Darwin rpaths. * Makefile.in: Handle Darwin rpaths. gcc/ada/ChangeLog: * gcc-interface/Makefile.in: Handle Darwin rpaths. gcc/jit/ChangeLog: * Make-lang.in: Handle Darwin rpaths. libatomic/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libbacktrace/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. libgcc/ChangeLog: * config/t-slibgcc-darwin: Generate libgcc_s with an @rpath name. * config.host: Handle Darwin rpaths. libgfortran/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths libgm2/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * libm2cor/Makefile.am: Handle Darwin rpaths. * libm2cor/Makefile.in: Regenerate. * libm2iso/Makefile.am: Handle Darwin rpaths. * libm2iso/Makefile.in: Regenerate. * libm2log/Makefile.am: Handle Darwin rpaths. * libm2log/Makefile.in: Regenerate. * libm2min/Makefile.am: Handle Darwin rpaths. * libm2min/Makefile.in: Regenerate. * libm2pim/Makefile.am: Handle Darwin rpaths. * libm2pim/Makefile.in: Regenerate. libgomp/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths libitm/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libobjc/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libphobos/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * libdruntime/Makefile.am: Handle Darwin rpaths. * libdruntime/Makefile.in: Regenerate. * src/Makefile.am: Handle Darwin rpaths. * src/Makefile.in: Regenerate. libquadmath/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libsanitizer/ChangeLog: * asan/Makefile.am: Handle Darwin rpaths. * asan/Makefile.in: Regenerate. * configure: Regenerate. * hwasan/Makefile.am: Handle Darwin rpaths. * hwasan/Makefile.in: Regenerate. * lsan/Makefile.am: Handle Darwin rpaths. * lsan/Makefile.in: Regenerate. * tsan/Makefile.am: Handle Darwin rpaths. * tsan/Makefile.in: Regenerate. * ubsan/Makefile.am: Handle Darwin rpaths. * ubsan/Makefile.in: Regenerate. libssp/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libstdc++-v3/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * src/Makefile.am: Handle Darwin rpaths. * src/Makefile.in: Regenerate. libvtv/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. lto-plugin/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. zlib/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths.
2022-11-14Revert "sphinx: add --with-sphinx-build"Martin Liska1-38/+0
This reverts commit 1f5a932e89b0c2c4a7af7f849ca2e2e3dbf329e0.
2022-11-14Revert "configure: always set SPHINX_BUILD"Martin Liska1-1/+1
This reverts commit 5e749ee3019d7917184af30dab8d09c933c0a4a1.
2022-11-13configure: always set SPHINX_BUILDMartin Liska1-1/+1
During the Sphinx-migration development, I used SPHINX_BUILD='' in order to skip building info and manual pages in gcc folder. However, we've got HAS_SPHINX_BUILD which is the correct flag for that. With the patch, one will get a nicer error message when sphinx-build is missing and one builds (explicitly) a target which depends on it. PR other/107620 gcc/ChangeLog: * configure: Regenerate. * configure.ac: Always set sphinx-build. libgomp/ChangeLog: * configure: Regenerate. * configure.ac: Always set sphinx-build. libiberty/ChangeLog: * configure: Regenerate. * configure.ac: Always set sphinx-build. libitm/ChangeLog: * configure: Regenerate. * configure.ac: Always set sphinx-build. libquadmath/ChangeLog: * configure: Regenerate. * configure.ac: Always set sphinx-build.
2022-11-09sphinx: add --with-sphinx-buildMartin Liska1-0/+38
gcc/ChangeLog: * Makefile.in: Support --with-sphinx-build. * configure.ac: * configure: Regenerate. gcc/ada/ChangeLog: * gcc-interface/Make-lang.in: Support --with-sphinx-build. gcc/d/ChangeLog: * Make-lang.in: Support --with-sphinx-build. gcc/fortran/ChangeLog: * Make-lang.in: Support --with-sphinx-build. gcc/go/ChangeLog: * Make-lang.in: Support --with-sphinx-build. gcc/jit/ChangeLog: * Make-lang.in: Support --with-sphinx-build. libgomp/ChangeLog: * Makefile.in: Support --with-sphinx-build. * configure.ac: Likewise.. * configure: Regenerate. libiberty/ChangeLog: * Makefile.in: Support --with-sphinx-build. * configure.ac: Likewise. * configure: Regenerate. libitm/ChangeLog: * Makefile.in: Support --with-sphinx-build. * configure.ac: Likewise. * configure: Regenerate. libquadmath/ChangeLog: * Makefile.in: Support --with-sphinx-build. * configure.ac: Likewise. * configure: Regenerate.
2022-01-11libquadmath: Use -mno-gnu-attribute in libquadmathJakub Jelinek1-0/+13
Testing found that we also need libquadmath to be built with -mno-gnu-attribute, otherwise -mabi=ieeelongdouble programs don't link. 2022-01-03 Jakub Jelinek <jakub@redhat.com> * configure.ac: Set XCFLAGS to -mno-gnu-attribute on powerpc64le*-linux*. * configure: Regenerated.
2020-01-24Add `--with-toolexeclibdir=' configuration optionMaciej W. Rozycki1-1/+10
Provide means, in the form of a `--with-toolexeclibdir=' configuration option, to override the default installation directory for target libraries, otherwise known as $toolexeclibdir. This is so that it is possible to get newly-built libraries, particularly the shared ones, installed in a common place, so that they can be readily used by the target system as their host libraries, possibly over NFS, without a need to manually copy them over from the currently hardcoded location they would otherwise be installed in. In the presence of the `--enable-version-specific-runtime-libs' option and for configurations building native GCC the option is ignored. config/ * toolexeclibdir.m4: New file. gcc/ * doc/install.texi (Cross-Compiler-Specific Options): Document `--with-toolexeclibdir' option. libada/ * Makefile.in (configure_deps): Add `toolexeclibdir.m4'. * configure.ac: Handle `--with-toolexeclibdir='. * configure: Regenerate. libatomic/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * testsuite/Makefile.in: Regenerate. libffi/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * include/Makefile.in: Regenerate. * man/Makefile.in: Regenerate. * testsuite/Makefile.in: Regenerate. libgcc/ * Makefile.in (configure_deps): Add `toolexeclibdir.m4'. * configure.ac: Handle `--with-toolexeclibdir='. * configure: Regenerate. libgfortran/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. libgomp/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * testsuite/Makefile.in: Regenerate. libhsail-rt/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. libitm/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * testsuite/Makefile.in: Regenerate. libobjc/ * Makefile.in (aclocal_deps): Add `toolexeclibdir.m4'. * aclocal.m4: Include `toolexeclibdir.m4'. * configure.ac: Handle `--with-toolexeclibdir='. * configure: Regenerate. liboffloadmic/ * plugin/configure.ac: Handle `--with-toolexeclibdir='. * plugin/Makefile.in: Regenerate. * plugin/aclocal.m4: Regenerate. * plugin/configure: Regenerate. * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. libphobos/ * m4/druntime.m4: Handle `--with-toolexeclibdir='. * m4/Makefile.in: Regenerate. * libdruntime/Makefile.in: Regenerate. * src/Makefile.in: Regenerate. * testsuite/Makefile.in: Regenerate. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. libquadmath/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. libsanitizer/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * asan/Makefile.in: Regenerate. * interception/Makefile.in: Regenerate. * libbacktrace/Makefile.in: Regenerate. * lsan/Makefile.in: Regenerate. * sanitizer_common/Makefile.in: Regenerate. * tsan/Makefile.in: Regenerate. * ubsan/Makefile.in: Regenerate. libssp/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. libstdc++-v3/ * acinclude.m4: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. * include/Makefile.in: Regenerate. * libsupc++/Makefile.in: Regenerate. * po/Makefile.in: Regenerate. * python/Makefile.in: Regenerate. * src/Makefile.in: Regenerate. * src/c++11/Makefile.in: Regenerate. * src/c++17/Makefile.in: Regenerate. * src/c++98/Makefile.in: Regenerate. * src/filesystem/Makefile.in: Regenerate. * testsuite/Makefile.in: Regenerate. libvtv/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * testsuite/Makefile.in: Regenerate. zlib/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate.
2018-10-31Update GCC to autoconf 2.69, automake 1.15.1 (PR bootstrap/82856).Joseph Myers1-1/+0
This patch updates GCC to use autoconf 2.69 and automake 1.15.1. (That's not the latest automake version, but it's the one used by binutils-gdb, with which consistency is desirable, and in any case seems a useful incremental update that should make a future update to 1.16.1 easier.) The changes are generally similar to the binutils-gdb ones, and are copied from there where shared files and directories are involved (there are some further changes to such shared directories, however, which I'd expect to apply to binutils-gdb once this patch is in GCC). Largely, obsolete AC_PREREQ calls are removed, while many AC_LANG_SOURCE calls are added to avoid warnings from aclocal and autoconf. Multilib support is no longer included in core automake, meaning that multilib.am needs copying from automake's contrib directory into the GCC source tree. Autoconf 2.69 has Go support, so local copies of that support are removed. I hope the D support will soon be submitted to upstream autoconf so the local copy of that can be removed in a future update. Changes to how automake generates runtest calls mean quotes are removed from RUNTEST definitions in five lib*/testsuite/Makefile.am files (libatomic, libgomp, libitm, libphobos, libvtv; some others have RUNTEST definitions without quotes, which are still OK); libgo and libphobos also get -Wno-override added to AM_INIT_AUTOMAKE so those overrides of RUNTEST do not generate automake warnings. Note that the regeneration did not include regeneration of fixincludes/config.h.in (attempting such regeneration resulted in all the USED_FOR_TARGET conditionals disappearing; and I don't see anything in the fixincludes/ directory that would result in such conditionals being generated, unlike in the gcc/ directory). Also note that libvtv/testsuite/other-tests/Makefile.in was not regenerated; that directory is not listed as a subdirectory for which Makefile.in gets regenerated by calling "automake" in libvtv/, so I'm not sure how it's meant to be regenerated. While I mostly fixed warnings should running aclocal / automake / autoconf, there were various such warnings from automake in the libgfortran, libgo, libgomp, liboffloadmic, libsanitizer, libphobos directories that I did not fix, preferring to leave those to the relevant subsystem maintainers. Specifically, most of those warnings were of the following form (example from libgfortran): Makefile.am:48: warning: source file 'caf/single.c' is in a subdirectory, Makefile.am:48: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. I think it's best for the relevant maintainers to add subdir-objects and do any other associated Makefile.am changes needed. In some cases the paths in the warnings involved ../; I don't know if that adds any extra complications to the use of subdir-objects. I've tested this with native, cross and Canadian cross builds. The risk of any OS-specific issues should I hope be rather lower than if a libtool upgrade were included (we *should* do such an upgrade at some point, but it's more complicated - it involves identifying all our local libtool changes to see if any aren't included in the upstream version we update to, and reverting an upstream libtool patch that's inappropriate for use in GCC); I think it would be better to get this update into GCC so that people can test in different configurations and we can fix any issues found, rather than to try to get more and more testing done before it goes in. top level: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * multilib.am: New file. From automake. Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * libtool.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE. * ar-lib: New file. * test-driver: New file. * configure: Re-generate. config: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * math.m4, tls.m4: Use AC_LANG_SOURCE. Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69. fixincludes: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * aclocal.m4, configure: Regenerate. gcc: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use single line for second argument of AC_DEFINE_UNQUOTED. * doc/install.texi (Tools/packages necessary for modifying GCC): Update to autoconf 2.69 and automake 1.15.1. * aclocal.m4, config.in, configure: Regenerate. gnattools: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * configure: Regenerate. gotools: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * config/go.m4: Remove file. * Makefile.am (ACLOCAL_AMFLAGS): Do not use -I ./config. * configure.ac: Remove AC_PREREQ. Do not include config/go.m4. * Makefile.in, aclocal.m4, configure: Regenerate. intl: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ. * configure: Re-generate. * config.h.in: Re-generate. * aclocal.m4: Re-generate. libada: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * configure: Regenerate. libatomic: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * acinclude.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ. * testsuite/Makefile.am (RUNTEST): Remove quotes. * Makefile.in, aclocal.m4, configure, testsuite/Makefile.in: Regenerate. libbacktrace: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. * Makefile.in, aclocal.m4, config.h.in, configure: Regenerate. libcc1: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, configure: Regenerate. libcpp: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. * aclocal.m4, config.in, configure: Regenerate. libdecnumber: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * aclocal.m4. libffi: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. (AUTOMAKE_OPTIONS): Add info-in-builddir. (CLEANFILES): Remove doc/libffi.info. * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, configure, fficonfig.h.in, include/Makefile.in, man/Makefile.in, testsuite/Makefile.in: Regenerate. libgcc: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. * configure: Regenerate. libgfortran: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, config.h.in, configure: Regenerate. libgo [logically part of this change but omitted from the commit]: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * config/go.m4: Remove file. * config/libtool.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use -Wno-override in AM_INIT_AUTOMAKE call. * Makefile.in, aclocal.m4, configure, testsuite/Makefile.in: Regenerate. libgomp: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am (AUTOMAKE_OPTIONS): Add info-in-builddir. (CLEANFILES): Remove libgomp.info. * configure.ac: Remove AC_PREREQ. * testsuite/Makefile.am (RUNTEST): Remove quotes. * Makefile.in, aclocal.m4, configure, testsuite/Makefile.in: Regenerate. libhsail-rt: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, configure: Regenerate. libiberty: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * config.in: Re-generate. libitm: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. (AUTOMAKE_OPTIONS): Add info-in-builddir. (CLEANFILES): Remove libitm.info. * configure.ac: Remove AC_PREREQ. * testsuite/Makefile.am (RUNTEST): Remove quotes. * Makefile.in, aclocal.m4, configure, testsuite/Makefile.in: Regenerate. libobjc: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * aclocal.m4, config.h.in, configure: Regenerate. liboffloadmic: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. * plugin/Makefile.am: Include multilib.am. * plugin/configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, configure, plugin/Makefile.in, plugin/aclocal.m4, plugin/configure: Regenerate. libphobos: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. Use -Wno-override in AM_INIT_AUTOMAKE call. * m4/autoconf.m4: Add extra argument to AC_LANG_DEFINE call. * m4/druntime/os.m4: Use AC_LANG_SOURCE. * testsuite/Makefile.am (RUNTEST): Remove quotes. * Makefile.in, aclocal.m4, configure, libdruntime/Makefile.in, src/Makefile.in, testsuite/Makefile.in: Regenerate. libquadmath: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. (AUTOMAKE_OPTIONS): Remove 1.8. Add info-in-builddir. (all-local): Define outside conditional code. (CLEANFILES): Remove libquadmath.info. * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, config.h.in, configure: Regenerate. libsanitizer: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. * Makefile.in, aclocal.m4, asan/Makefile.in, configure, interception/Makefile.in, libbacktrace/Makefile.in, lsan/Makefile.in, sanitizer_common/Makefile.in, tsan/Makefile.in, ubsan/Makefile.in: Regenerate. libssp: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. (AUTOMAKE_OPTIONS): Remove 1.9.5. * configure.ac: Remove AC_PREREQ. Quote argument to AC_RUN_IFELSE. * Makefile.in, aclocal.m4, configure: Regenerate. libstdc++-v3: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, configure, doc/Makefile.in, include/Makefile.in, libsupc++/Makefile.in, po/Makefile.in, python/Makefile.in, src/Makefile.in, src/c++11/Makefile.in, src/c++17/Makefile.in, src/c++98/Makefile.in, src/filesystem/Makefile.in, testsuite/Makefile.in: Regenerate. libvtv: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. * testsuite/Makefile.am (RUNTEST): Remove quotes. * Makefile.in, aclocal.m4, configure, testsuite/Makefile.in: Regenerate. lto-plugin: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. * Makefile.in, aclocal.m4, config.h.in, configure: Regenerate. zlib: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * configure.ac: Modernize AC_INIT call, remove AC_PREREQ. * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. From-SVN: r265695
2017-11-17Enable building libquadmath with Intel CETIgor Tsimbalist1-0/+5
libquadmath/ * Makefile.am: Update AM_CFLAGS. * Makefile.in: Regenerate: * acinclude.m4: Add enable.m4 and cet.m4. * configure: Regenerate. * configure.ac: Set CET_FLAGS. Update XCFLAGS. From-SVN: r254899
2017-09-01re PR libquadmath/81848 (Add PowerPC support to libquadmath)Michael Meissner1-0/+4
2017-09-01 Michael Meissner <meissner@linux.vnet.ibm.com> PR libquadmath/81848 * configure.ac (powerpc*-linux*): Use attribute mode KC to create complex __float128 on PowerPC instead of attribute mode TC. * quadmath.h (__complex128): Likewise. * configure: Regenerate. * math/cbrtq.c (CBRT2): Use __float128 not long double. (CBRT4): Likewise. (CBRT2I): Likewise. (CBRT4I): Likewise. * math/j0q.c (U0): Likewise. * math/sqrtq.c (sqrtq): Don't depend on implicit conversion between __float128, instead explicitly convert the __float128 value to long double because the PowerPC does not allow __float128 and long double in the same expression. From-SVN: r251613
2017-02-09configure.ac (ACX_BUGURL): Update.Gerald Pfeifer1-1/+1
* configure.ac (ACX_BUGURL): Update. * configure: Regenerate. From-SVN: r245299
2017-01-17re PR other/79046 (g++ -print-file-name=plugin uses full version number in path)Jakub Jelinek1-0/+2
PR other/79046 * configure: Regenerated. config/ * acx.m4 (GCC_BASE_VER): New m4 function. (ACX_TOOL_DIRS): Require GCC_BASE_VER, for --with-gcc-major-version-only use just major number from BASE-VER. gcc/ * configure.ac: Add GCC_BASE_VER. * Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. (CFLAGS-gcc.o): Add -DBASEVER=$(BASEVER_s). (gcc.o): Depend on $(BASEVER). * common.opt (dumpfullversion): New option. * gcc.c (driver_handle_option): Handle OPT_dumpfullversion. * doc/invoke.texi: Document -dumpfullversion. * doc/install.texi: Document --with-gcc-major-version-only. * configure: Regenerated. libatomic/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * testsuite/Makefile.in: Regenerated. * configure: Regenerated. * Makefile.in: Regenerated. libgomp/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * testsuite/Makefile.in: Regenerated. * configure: Regenerated. * Makefile.in: Regenerated. libgcc/ * configure.ac: Add GCC_BASE_VER. * Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. libssp/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. * Makefile.in: Regenerated. liboffloadmic/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * aclocal.m4: Include ../config/acx.m4. * configure: Regenerated. * Makefile.in: Regenerated. libquadmath/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. * Makefile.in: Regenerated. libmpx/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. * Makefile.in: Regenerated. libada/ * configure.ac: Add GCC_BASE_VER. * Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. lto-plugin/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. * Makefile.in: Regenerated. libitm/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * testsuite/Makefile.in: Regenerated. * configure: Regenerated. * Makefile.in: Regenerated. fixincludes/ * configure.ac: Add GCC_BASE_VER. * Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. libcilkrts/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * aclocal.m4: Include ../config/acx.m4. * configure: Regenerated. * Makefile.in: Regenerated. libcc1/ * configure.ac: Add GCC_BASE_VER. For --with-gcc-major-version-only use just major number from BASE-VER. * configure: Regenerated. * Makefile.in: Regenerated. libobjc/ * configure.ac: Add GCC_BASE_VER. * Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. libstdc++-v3/ * configure.ac: Add GCC_BASE_VER. * fragment.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * po/Makefile.in: Regenerated. * libsupc++/Makefile.in: Regenerated. * testsuite/Makefile.in: Regenerated. * src/Makefile.in: Regenerated. * configure: Regenerated. * Makefile.in: Regenerated. * include/Makefile.in: Regenerated. * doc/Makefile.in: Regenerated. * python/Makefile.in: Regenerated. * src/c++11/Makefile.in: Regenerated. * src/c++98/Makefile.in: Regenerated. * src/filesystem/Makefile.in: Regenerated. libvtv/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * testsuite/Makefile.in: Regenerated. * configure: Regenerated. * Makefile.in: Regenerated. libsanitizer/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * libbacktrace/Makefile.in: Regenerated. * interception/Makefile.in: Regenerated. * asan/Makefile.in: Regenerated. * ubsan/Makefile.in: Regenerated. * configure: Regenerated. * sanitizer_common/Makefile.in: Regenerated. * lsan/Makefile.in: Regenerated. * Makefile.in: Regenerated. * tsan/Makefile.in: Regenerated. libgfortran/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. * Makefile.in: Regenerated. From-SVN: r244521
2015-01-26configure.ac: Move AM_ENABLE_MULTILIB before AC_PROG_CC.Matthias Klose1-1/+2
2015-01-24 Matthias Klose <doko@ubuntu.com> * configure.ac: Move AM_ENABLE_MULTILIB before AC_PROG_CC. * configure: Regenerate. From-SVN: r220113
2012-11-21re PR libquadmath/55225 (Fail to build lgammaq.c from trunk with mingw-w64)Tobias Burnus1-0/+1
2012-11-21 Tobias Burnus <burnus@net-b.de> PR libquadmath/55225 * math/lgammaq.c (lgammaq): Use local variable if math.h does not provide signgam. * acinclude.m4 (LIBQUAD_CHECK_MATH_H_SIGNGAM): New check. * configure.ac: Use it. * configure: Regenerate. * config.h.in: Regenerate. From-SVN: r193695
2012-05-31re PR target/51007 (Quadmath I/O doesn't work on MinGW)Benjamin Kosnik1-1/+1
2012-05-31 Benjamin Kosnik <bkoz@redhat.com> PR libstdc++/51007 * configure.ac: Allow gnu, gnu* variants for --enable-symvers argument. * configure: Regenerated. From-SVN: r188076
2011-03-21re PR bootstrap/48135 (build fails on Solaris2.8 due to Glob.pm not found ↵Rainer Orth1-20/+27
within /usr/perl5) libgfortran: PR bootstrap/48135 * configure.ac (gfortran_use_symver): Handle --disable-symvers. * configure: Regenerate. libgomp: PR bootstrap/48135 * acinclude.m4 (enable_symvers): Handle --disable-symvers. * configure: Regenerate. libjava: PR bootstrap/48135 * configure.ac (libjava_cv_anon_version_script): Handle --disable-symvers. * configure: Regenerate. libquadmath: PR bootstrap/48135 * configure.ac (quadmath_use_symver): Handle --disable-symvers. * configure: Regenerate. libssp: PR bootstrap/48135 * configure.ac (ssp_use_symver): Handle --disable-symvers. * configure: Regenerate. From-SVN: r171224
2011-02-17libquadmath.texi (FLT128_DIG, [...]): Document.Jakub Jelinek1-0/+1
* libquadmath.texi (FLT128_DIG, FLT128_MIN_10_EXP, FLT128_MAX_10_EXP): Document. (strtoflt128): Remove obsolete comment. * configure.ac (HAVE_STRTOULL): New check. * printf/gmp-impl.h (mpn_construct_float128): New prototype, define. * printf/mul_n.c: Include <config.h>. * printf/add_n.c: Likewise. * printf/cmp.c: Likewise. * printf/fpioconst.c: Likewise. * printf/mul_1.c: Likewise. * printf/rshift.c: Likewise. * printf/lshift.c: Likewise. * printf/submul_1.c: Likewise. * printf/sub_n.c: Likewise. * printf/divrem.c: Likewise. * printf/addmul_1.c: Likewise. * printf/mul.c: Likewise. * printf/quadmath-printf.h (isupper, isdigit, tolower): Change to avoid evaluating argument multiple times. (isxdigit): Redefine. * strtod/strtoflt128.c: New file. * strtod/strtod_l.c: New file. * strtod/mpn2flt128.c: New file. * strtod/grouping.h: New file. * strtod/tens_in_limb.c: New file. * gdtoa/arith.h: Removed. * gdtoa/gd_qnan.h: Removed. * gdtoa/gdtoa_fltrnds.h: Removed. * gdtoa/gdtoa.h: Removed. * gdtoa/gdtoaimp.h: Removed. * gdtoa/gethex.c: Removed. * gdtoa/gmisc.c: Removed. * gdtoa/hd_init.c: Removed. * gdtoa/hexnan.c: Removed. * gdtoa/makefile: Removed. * gdtoa/misc.c: Removed. * gdtoa/README.gdtoa: Removed. * gdtoa/smisc.c: Removed. * gdtoa/strtodg.c: Removed. * gdtoa/strtopQ.c: Removed. * gdtoa/sum.c: Removed. * quadmath.h (FLT128_DIG, FLT128_MIN_10_EXP, FLT128_MAX_10_EXP): Define. * Makefile.am (libquadmath_la_SOURCES): Remove gdtoa/*, add strtod/strtoflt128.c, strtod/mpn2flt128.c and strtod/tens_in_limb.c. * config.h.in: Regenerated. * configure: Regenerated. * Makefile.in: Regenerated. From-SVN: r170254
2011-02-16quadmath-printf.c: Also check __GLIBC__ when checking whether workarounds ↵Jakub Jelinek1-7/+36
for printf hook handling... * printf/quadmath-printf.c: Also check __GLIBC__ when checking whether workarounds for printf hook handling should be added. * configure.ac: Check for locale.h too. (USE_LOCALE_SUPPORT): Remove check. (USE_NL_LANGINFO, USE_NL_LANGINFO_WC, USE_LOCALECONV): New checks. (USE_I18_NUMBER_H): Check also for _NL_CTYPE_MB_CUR_MAX. * printf/printf_fphex.c (__quadmath_printf_fphex): Use nl_langinfo or localeconv for narrow version and nl_langinfo if USE_NL_LANGINFO_WC for wide version. * printf/quadmath-printf.h: Include locale.h if HAVE_LOCALE_H. * printf/printf_fp.c (USE_I18N_NUMBER_H): Don't define to 0. (__quadmath_printf_fp): Use nl_langinfo or localeconv for narrow version and nl_langinfo if USE_NL_LANGINFO_WC for wide version. Guard nl_langinfo (_NL_CTYPE_MB_CUR_MAX) use with USE_I18N_NUMBER_H #ifdef. * configure: Regenerated. * config.h.in: Regenerated. From-SVN: r170211
2011-02-14re PR bootstrap/47736 (libquadmath build broken with pre-2.10 glibc)Jakub Jelinek1-0/+1
PR bootstrap/47736 * configure.ac (HAVE_PRINTF_HOOKS): Test if printf_info struct has user field. * printf/quadmath-printf.c (quadmath_snprintf): Clear whole info field instead of setting individual fields to 0. Don't set info.user to -1. * configure: Regenerated. From-SVN: r170147
2011-02-14configure.ac (HAVE_HIDDEN_VISIBILITY): Test with -Werror in CFLAGS.Jakub Jelinek1-0/+3
* configure.ac (HAVE_HIDDEN_VISIBILITY): Test with -Werror in CFLAGS. * printf/printf_fp.c: Don't include <alloca.h>. * printf/quadmath-printf.h (_itoa): Redefine to __quadmath_itoa. * configure: Regenerated. From-SVN: r170139
2011-02-14re PR fortran/47642 (real(kind=16) - libquadmath - segfault on amd64 FreeBSD)Jakub Jelinek1-1/+82
PR fortran/47642 * libquadmath.texi (quadmath_snprintf): Document. (quadmath_flt128tostr): Remove. * Makefile.am (libquadmath_la_SOURCES): Add printf/*.c. Remove quadmath_io.c, gdtoa/gdtoa.c, gdtoa/g__fmt.c, gdtoa/g_Qfmt.c, gdtoa/dmisc.c and gdtoa/ulp.c. * quadmath.h (quadmath_snprintf): New prototype. (quadmath_flt128tostr): Remove. * quadmath_weak.h (quadmath_snprintf): Add. (quadmath_flt128tostr): Remove. * configure.ac: New AC_CHECK_HEADERS headers: langinfo.h, wchar.h, wctype.h, limits.h, ctype.h, printf.h, errno.h. (AC_USE_SYSTEM_EXTENSIONS): Add. (HAVE_HIDDEN_VISIBILITY, HAVE_PRINTF_HOOKS, USE_LOCALE_SUPPORT, USE_I18N_NUMBER_H): New checks. * quadmath.map (QUADMATH_1.0): Add quadmath_snprintf. Remove quadmath_flt128tostr. * printf/printf_fphex.c: New file. * printf/_itowa.h: New file. * printf/mul_n.c: New file. * printf/quadmath-printf.h: New file. * printf/submul_1.c: New file. * printf/quadmath-printf.c: New file. * printf/gmp-impl.h: New file. * printf/lshift.c: New file. * printf/fpioconst.h: New file. * printf/add_n.c: New file. * printf/cmp.c: New file. * printf/sub_n.c: New file. * printf/mul.c: New file. * printf/divrem.c: New file. * printf/addmul_1.c: New file. * printf/printf_fp.c: New file. * printf/_itoa.h: New file. * printf/fpioconst.c: New file. * printf/_i18n_number.h: New file. * printf/flt1282mpn.c: New file. * printf/rshift.c: New file. * printf/mul_1.c: New file. * quadmath_io.c: Removed. * gdtoa/gdtoa.c: Removed. * gdtoa/g__fmt.c: Removed. * gdtoa/g_Qfmt.c: Removed. * gdtoa/dmisc.c: Removed. * gdtoa/ulp.c: Removed. * config.h.in: Regenerated. * configure: Regenerated. * Makefile.in: Regenerated. * io/write_float.def (DTOAQ): Use quadmath_snprintf instead of quadmath_flt128tostr. * io/transfer128.c (tmp2): Initialize to quadmath_snprintf instead of quadmath_flt128tostr. From-SVN: r170135
2011-01-16re PR fortran/46402 (libquadmath: Add fmalq)Jakub Jelinek1-0/+22
PR fortran/46402 * quadmath.map (QUADMATH_1.0): Add fmaq. * configure.ac: Check for fenv.h, feholdexcept, fesetround, feupdateenv, fesetenv and fetestexcept. * configure: Regenerated. * config.h.in: Regenerated. * quadmath.h (fmaq): New prototype. * quadmath_weak.h (fmaq): Add. * Makefile.am (libquadmath_la_SOURCES): Add math/fmaq.c. * Makefile.in: Regenerated. * quadmath-imp.h: Include config.h. * math/expq.c: Include fenv.h. (USE_FENV_H): Define if libm support for fe* is there. (expq): Add fesetround etc. support if USE_FENV_H is defined. * math/fmaq.c: New file. * libquadmath.texi (fmaq): Add. From-SVN: r168852
2011-01-14re PR fortran/47182 (libquadmath.texi: undefined flag: BUGURL)Tobias Burnus1-0/+1
2011-01-14 Tobias Burnus <burnus@net-b.de> PR fortran/47182 * configure.ac: Use ACX_BUGURL. * libquadmath.texi: Include libquadmath-vers.texi for BUGURL. * Makefile.am: Create libquadmath-vers.texi. * configure.in: Regenerate. * Makefile.in: Regenerate. From-SVN: r168776
2011-01-06re PR fortran/47174 (libquadmath: Build now depends on makeinfo)Ralf Wildenhues1-1/+1
Fix PR fortran/47174 libquadmath/: PR fortran/47174 * Makefile.am (libquadmath.info): Unconditionally override target, not only if BUILD_LIBQUADMATH. * Makefile.in: Regenerate. * configure.ac (AM_INIT_AUTOMAKE): Add -Wno-override option to avoid warning from automake. From-SVN: r168555
2010-12-19re PR fortran/46520 (libquadmath: fails at link test on bare irons)Tobias Burnus1-2/+13
2010-12-19 Tobias Burnus <burnus@net-b.de> PR fortran/46520 * configure.ac: Do not call AC_CHECK_LIB for gcc_no_link. * configure: Regenerate From-SVN: r168069
2010-12-08re PR fortran/46520 (libquadmath: fails at link test on bare irons)Tobias Burnus1-15/+6
2010-12-08 Tobias Burnus <burnus@net-b.de> PR fortran/46520 * configure.ac: Use GCC_TRY_COMPILE_OR_LINK instead of AC_TRY_LINK and cache libquad_have_float128. * configure: Regenerate. From-SVN: r167605
2010-12-08re PR fortran/46543 (libquadmath: Add documentation)Tobias Burnus1-1/+30
2010-12-08 Tobias Burnus <burnus@net-b.de> PR fortran/46543 * configure.ac: Add texinfo checks. * Makefile.am: Handle .texi documentation. * libquadmath.texi: New. * configure: Regenerated. * Makefile.in: Regenerated. From-SVN: r167583
2010-12-06re PR target/40125 (libgcc_s DLL installed in wrong directory in cross ↵Dave Korn1-0/+1
toolchain) config/ChangeLog: 2010-12-06 Dave Korn <dave.korn.cygwin@gmail.com> PR target/40125 PR lto/46695 * lthostflags.m4: New file. (ACX_LT_HOST_FLAGS): Define. libgfortran/ChangeLog: 2010-12-06 Dave Korn <dave.korn.cygwin@gmail.com> PR target/40125 PR lto/46695 * configure.ac: Invoke ACX_LT_HOST_FLAGS. * Makefile.am (LTLDFLAGS): Use lt_host_flags. * aclocal.m4: Regenerate. * configure: Regenerate. * Makefile.in: Regenerate. libgomp/ChangeLog: 2010-12-06 Dave Korn <dave.korn.cygwin@gmail.com> PR target/40125 PR lto/46695 * configure.ac: Invoke ACX_LT_HOST_FLAGS. * Makefile.am (libgomp_la_LDFLAGS): Use lt_host_flags. * aclocal.m4: Regenerate. * configure: Regenerate. * Makefile.in: Regenerate. * testsuite/Makefile.in: Regenerate. libjava/ChangeLog: 2010-12-06 Dave Korn <dave.korn.cygwin@gmail.com> PR target/40125 PR lto/46695 * configure.ac: Invoke ACX_LT_HOST_FLAGS. * configure.host (libgcj_sublib_ltflags): Use lt_host_flags. * aclocal.m4: Regenerate. * configure: Regenerate. * Makefile.in: Regenerate. * gcj/Makefile.in: Regenerate. * include/Makefile.in: Regenerate. * testsuite/Makefile.in: Regenerate. libobjc/ChangeLog: 2010-12-06 Dave Korn <dave.korn.cygwin@gmail.com> PR target/40125 PR lto/46695 * configure.ac (extra_ldflags_libobjc): Invoke ACX_LT_HOST_FLAGS. * Makefile.in (lt_host_flags): Import AC_SUBST'd value. * aclocal.m4: Regenerate. * configure: Regenerate. libquadmath/ChangeLog: 2010-12-06 Dave Korn <dave.korn.cygwin@gmail.com> PR target/40125 PR lto/46695 * configure.ac: Invoke ACX_LT_HOST_FLAGS. * Makefile.am (libquadmath_la_LDFLAGS): Use lt_host_flags. * aclocal.m4: Regenerate. * configure: Regenerate. * Makefile.in: Regenerate. libssp/ChangeLog: 2010-12-06 Dave Korn <dave.korn.cygwin@gmail.com> PR target/40125 PR lto/46695 * configure.ac: Invoke ACX_LT_HOST_FLAGS. * Makefile.am (libssp_la_LDFLAGS): Use lt_host_flags. * aclocal.m4: Regenerate. * configure: Regenerate. * Makefile.in: Regenerate. libstdc++-v3/ChangeLog: 2010-12-06 Dave Korn <dave.korn.cygwin@gmail.com> PR target/40125 PR lto/46695 * configure.ac: Invoke ACX_LT_HOST_FLAGS. * configure.host (OPT_LDFLAGS): Use lt_host_flags for cygming. * aclocal.m4: Regenerate. * configure: Regenerate. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. * include/Makefile.in: Regenerate. * libsupc++/Makefile.in: Regenerate. * po/Makefile.in: Regenerate. * python/Makefile.in: Regenerate. * src/Makefile.in: Regenerate. * testsuite/Makefile.in: Regenerate. lto-plugin/ChangeLog: 2010-12-06 Dave Korn <dave.korn.cygwin@gmail.com> PR target/40125 PR lto/46695 * configure.ac: Invoke ACX_LT_HOST_FLAGS. * Makefile.am (liblto_plugin_la_LDFLAGS): Use lt_host_flags but override -bindir setting. * aclocal.m4: Regenerate. * configure: Regenerate. * Makefile.in: Regenerate. From-SVN: r167480
2010-11-29configure: Regenerated.Kai Tietz1-18/+45
2010-11-29 Kai Tietz <kai.tietz@onevision.com> * configure: Regenerated. * Makefile.in: Regenerated. * configure.ac (ACX_NONCANONICAL_TARGET): Call it. (target_alias): Use AC_SUBST for it. (GCC_NO_EXECUTABLES): Call it. (AC_PROG_CC): Improve multilib handling. Check that gcc is used for compilation. Use pattern from libssp for symbol versioning checking. * Makefile.am (LTLDFLAGS): Removed. (libquadmath_la_LDFLAGS): Add -no-undefined. (libquadmath_la_LINK): Commented out. (libquadmath_la_DEPENDENCIES): Add libquadmath_la_LIBADD. (AM_MAKEFLAGS): Add hack for argument passing by top-level. (MAKEOVERRIDES): New. * aclocal.m4: Regenerated. From-SVN: r167259
2010-11-16re PR fortran/32049 (Support on x86_64 also kind=16)Francois-Xavier Coudert1-0/+163
/ 2010-11-13 Francois-Xavier Coudert <fxcoudert@gcc.gnu.org> Tobias Burnus <burnus@net-b.de> PR fortran/32049 * Makefile.def: Add libquadmath; build it with language=fortran. * configure.ac: Add libquadmath. * Makefile.tpl: Handle multiple libs in check-[+language+]. * Makefile.in: Regenerate. * configure: Regenerate. libquadmath/ 2010-11-13 Francois-Xavier Coudert <fxcoudert@gcc.gnu.org> Tobias Burnus <burnus@net-b.de> PR fortran/32049 Initial implementation and checkin. gcc/fortran/ 2010-11-13 Francois-Xavier Coudert <fxcoudert@gcc.gnu.org> Tobias Burnus <burnus@net-b.de> PR fortran/32049 * gfortranspec.c (find_spec_file): New function. (lang_specific_driver): Try to find .spec file and use it. * trans-io.c (iocall): Define * IOCALL_X_REAL128/COMPLEX128(,write). (gfc_build_io_library_fndecls): Build decl for __float128 I/O. (transfer_expr): Call __float128 I/O functions. * trans-types.c (gfc_init_kinds): Allow kind-16 belonging to __float128. gcc/testsuite/ 2010-11-13 Francois-Xavier Coudert <fxcoudert@gcc.gnu.org> Tobias Burnus <burnus@net-b.de> PR fortran/32049 * gfortran.dg/quad_1.f90: New. * lib/gcc-defs.exp (gcc-set-multilib-library-path): Use also compiler arguments. * lib/gfortran.exp (gfortran_link_flags): Add libquadmath to library search path; call gcc-set-multilib-library-path with arguments such that libgfortran.spec is found. (gfortran_init): Add path for libgfortran.spec to GFORTRAN_UNDER_TEST. libgomp/ 2010-11-13 Francois-Xavier Coudert <fxcoudert@gcc.gnu.org> Tobias Burnus <burnus@net-b.de> PR fortran/32049 * configure.ac: * configure: Regenerate. libgfortran/ 2010-11-13 Francois-Xavier Coudert <fxcoudert@gcc.gnu.org> Tobias Burnus <burnus@net-b.de> PR fortran/32049 * Makefile.am: Add missing pow_r16_i4.c, add transfer128.c, link libquadmath, if used. * acinclude.m4 (LIBGFOR_CHECK_FLOAT128): Add. * configure.ac: Use it, touch spec file. * gfortran.map: Add pow_r16_i4 and transfer_(real,complex)128(,write) functions. * intrinsics/cshift0.c (cshift0): Handle __float128 type. * intrinsics/erfc_scaled_inc.c: Ditto. * intrinsics/pack_generic.c (pack): Ditto * intrinsics/spread_generic.c (spread): Ditto. * intrinsics/unpack_generic.c (unpack1): Ditto. * io/read.c (convert_real): Ditto. * io/transfer.c: Update comments. * io/transfer128.c: New file. * io/write_float.def (write_float): Handle __float128 type. * libgfortran.h: #include quadmath_weak.h, define __builtin_infq and nanq. * m4/mtype.m4: Handle __float128 type. * runtime/in_pack_generic.c (internal_pack): Ditto. * runtime/in_unpack_generic.c (internal_unpack): Ditto. * kinds-override.h: New file. * libgfortran.spec.in: Ditto. * generated/pow_r16_i4.c: Generated. * Makefile.in: Regenerate. * configure: Regenerate. * config.h: Regenerate. * bessel_r10.c: Regenerate. * bessel_r16.c: Regenerate. * bessel_r4.c: Regenerate. * bessel_r8.c: Regenerate. * exponent_r16.c: Regenerate. * fraction_r16.c: Regenerate. * nearest_r16.c: Regenerate. * norm2_r10.c: Regenerate. * norm2_r16.c: Regenerate. * norm2_r4.c: Regenerate. * norm2_r8.c: Regenerate. * rrspacing_r16.c: Regenerate. * set_exponent_r16.c: Regenerate. * spacing_r16.c: Regenerate. Co-Authored-By: Tobias Burnus <burnus@net-b.de> From-SVN: r166825
generated by cgit v1.1 at 2024-09-30 09:57:38 +0000