aboutsummaryrefslogtreecommitdiff
path: root/libobjc
AgeCommit message (Collapse)AuthorFilesLines
2024-01-03Update copyright years.Jakub Jelinek49-49/+49
2024-01-03Update Copyright year in ChangeLog filesJakub Jelinek1-1/+1
2023 -> 2024
2023-10-23Daily bump.GCC Administrator1-0/+5
2023-10-22Config,Darwin: Allow for configuring Darwin to use embedded runpath.Iain Sandoe2-28/+120
Recent Darwin versions place contraints on the use of run paths specified in environment variables. This breaks some assumptions in the GCC build. This change allows the user to configure a Darwin build to use '@rpath/libraryname.dylib' in library names and then to add an embedded runpath to executables (and libraries with dependents). The embedded runpath is added by default unless the user adds '-nodefaultrpaths' to the link line. For an installed compiler, it means that any executable built with that compiler will reference the runtimes installed with the compiler (equivalent to hard-coding the library path into the name of the library). During build-time configurations any "-B" entries will be added to the runpath thus the newly-built libraries will be found by exes. Since the install name is set in libtool, that decision needs to be available here (but might also cause dependent ones in Makefiles, so we need to export a conditional). This facility is not available for Darwin 8 or earlier, however the existing environment variable runpath does work there. We default this on for systems where the external DYLD_LIBRARY_PATH does not work and off for Darwin 8 or earlier. For systems that can use either method, if the value is unset, we use the default (which is currently DYLD_LIBRARY_PATH). ChangeLog: * configure: Regenerate. * configure.ac: Do not add default runpaths to GCC exes when we are building -static-libstdc++/-static-libgcc (the default). * libtool.m4: Add 'enable-darwin-at-runpath'. Act on the enable flag to alter Darwin libraries to use @rpath names. gcc/ChangeLog: * aclocal.m4: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * config/darwin.h: Handle Darwin rpaths. * config/darwin.opt: Handle Darwin rpaths. * Makefile.in: Handle Darwin rpaths. gcc/ada/ChangeLog: * gcc-interface/Makefile.in: Handle Darwin rpaths. gcc/jit/ChangeLog: * Make-lang.in: Handle Darwin rpaths. libatomic/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libbacktrace/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. libgcc/ChangeLog: * config/t-slibgcc-darwin: Generate libgcc_s with an @rpath name. * config.host: Handle Darwin rpaths. libgfortran/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths libgm2/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * libm2cor/Makefile.am: Handle Darwin rpaths. * libm2cor/Makefile.in: Regenerate. * libm2iso/Makefile.am: Handle Darwin rpaths. * libm2iso/Makefile.in: Regenerate. * libm2log/Makefile.am: Handle Darwin rpaths. * libm2log/Makefile.in: Regenerate. * libm2min/Makefile.am: Handle Darwin rpaths. * libm2min/Makefile.in: Regenerate. * libm2pim/Makefile.am: Handle Darwin rpaths. * libm2pim/Makefile.in: Regenerate. libgomp/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths libitm/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libobjc/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libphobos/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * libdruntime/Makefile.am: Handle Darwin rpaths. * libdruntime/Makefile.in: Regenerate. * src/Makefile.am: Handle Darwin rpaths. * src/Makefile.in: Regenerate. libquadmath/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libsanitizer/ChangeLog: * asan/Makefile.am: Handle Darwin rpaths. * asan/Makefile.in: Regenerate. * configure: Regenerate. * hwasan/Makefile.am: Handle Darwin rpaths. * hwasan/Makefile.in: Regenerate. * lsan/Makefile.am: Handle Darwin rpaths. * lsan/Makefile.in: Regenerate. * tsan/Makefile.am: Handle Darwin rpaths. * tsan/Makefile.in: Regenerate. * ubsan/Makefile.am: Handle Darwin rpaths. * ubsan/Makefile.in: Regenerate. libssp/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libstdc++-v3/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * src/Makefile.am: Handle Darwin rpaths. * src/Makefile.in: Regenerate. libvtv/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. lto-plugin/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. zlib/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths.
2023-08-08Daily bump.GCC Administrator1-0/+24
2023-08-07libtool.m4: augment symcode for Solaris 11Nick Alcock1-1/+1
This reports common symbols like GNU nm, via a type code of 'C'. ChangeLog: * libtool.m4 (lt_cv_sys_global_symbol_pipe): Augment symcode for Solaris 11. gcc/ChangeLog: * configure: Regenerate. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgm2/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. libphobos/ChangeLog: * configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2023-08-07Add support for the haiku operating systemAlexander von Gluck IV1-1/+1
These are the os support patches we have been grooming and maintaining for quite a few years over on git.haiku-os.org. All of these architectures are working and most have been stable for quite some time. ChangeLog: * configure: Regenerate. * configure.ac: Add Haiku to list of ELF OSes * libtool.m4: Update sys_lib_dlsearch_path_spec on Haiku. gcc/ChangeLog: * configure: Regenerate. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgm2/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. libphobos/ChangeLog: * configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2023-08-07libtool.m4: fix the NM="/nm/over/here -B/option/with/path" caseNick Alcock1-7/+13
My previous nm patch handled all cases but one -- if the user set NM in the environment to a path which contained an option, libtool's nm detection tries to run nm against a copy of nm with the options in it: e.g. if NM was set to "nm --blargle", and nm was found in /usr/bin, the test would try to run "/usr/bin/nm --blargle /usr/bin/nm --blargle". This is unlikely to be desirable: in this case we should run "/usr/bin/nm --blargle /usr/bin/nm". Furthermore, as part of this nm has to detect when the passed-in $NM contains a path, and in that case avoid doing a path search itself. This too was thrown off if an option contained something that looked like a path, e.g. NM="nm -B../prev-gcc"; libtool then tries to run "nm -B../prev-gcc nm" which rarely works well (and indeed it looks to see whether that nm exists, finds it doesn't, and wrongly concludes that nm -p or whatever does not work). Fix all of these by clipping all options (defined as everything including and after the first " -") before deciding whether nm contains a path (but not using the clipped value for anything else), and then removing all options from the path-modified nm before looking to see whether that nm existed. NM=my-nm now does a path search and runs e.g. /usr/bin/my-nm -B /usr/bin/my-nm NM=/usr/bin/my-nm now avoids a path search and runs e.g. /usr/bin/my-nm -B /usr/bin/my-nm NM="my-nm -p../wombat" now does a path search and runs e.g. /usr/bin/my-nm -p../wombat -B /usr/bin/my-nm NM="../prev-binutils/new-nm -B../prev-gcc" now avoids a path search: ../prev-binutils/my-nm -B../prev-gcc -B ../prev-binutils/my-nm This seems to be all combinations, including those used by GCC bootstrap (which, before this commit, fails to bootstrap when configured --with-build-config=bootstrap-lto, because the lto plugin is now using --export-symbols-regex, which requires libtool to find a working nm, while also using -B../prev-gcc to point at the lto plugin associated with the GCC just built.) Regenerate all affected configure scripts. ChangeLog: * libtool.m4 (LT_PATH_NM): Handle user-specified NM with options, including options containing paths. gcc/ChangeLog: * configure: Regenerate. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgm2/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. libphobos/ChangeLog: * configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2023-08-07libtool.m4: fix nm BSD flag detectionNick Alcock1-44/+45
Libtool needs to get BSD-format (or MS-format) output out of the system nm, so that it can scan generated object files for symbol names for -export-symbols-regex support. Some nms need specific flags to turn on BSD-formatted output, so libtool checks for this in its AC_PATH_NM. Unfortunately the code to do this has a pair of interlocking flaws: - it runs the test by doing an nm of /dev/null. Some platforms reasonably refuse to do an nm on a device file, but before now this has only been worked around by assuming that the error message has a specific textual form emitted by Tru64 nm, and that getting this error means this is Tru64 nm and that nm -B would work to produce BSD-format output, even though the test never actually got anything but an error message out of nm -B. This is fixable by nm'ing *nm itself* (since we necessarily have a path to it). - the test is entirely skipped if NM is set in the environment, on the grounds that the user has overridden the test: but the user cannot reasonably be expected to know that libtool wants not only nm but also flags forcing BSD-format output. Worse yet, one such "user" is the top-level Cygnus configure script, which neither tests for nor specifies any BSD-format flags. So platforms needing BSD-format flags always fail to set them when run in a Cygnus tree, breaking -export-symbols-regex on such platforms. Libtool also needs to augment $LD on some platforms, but this is done unconditionally, augmenting whatever the user specified: the nm check should do the same. One wrinkle: if the user has overridden $NM, a path might have been provided: so we use the user-specified path if there was one, and otherwise do the path search as usual. (If the nm specified doesn't work, this might lead to a few extra pointless path searches -- but the test is going to fail anyway, so that's not a problem.) (Tested with NM unset, and set to nm, /usr/bin/nm, my-nm where my-nm is a symlink to /usr/bin/nm on the PATH, and /not-on-the-path/my-nm where *that* is a symlink to /usr/bin/nm.) ChangeLog: * libtool.m4 (LT_PATH_NM): Try BSDization flags with a user-provided NM, if there is one. Run nm on itself, not on /dev/null, to avoid errors from nms that refuse to work on non-regular files. Remove other workarounds for this problem. Strip out blank lines from the nm output. fixincludes/ChangeLog: * configure: Regenerate. gcc/ChangeLog: * configure: Regenerate. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgm2/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. libphobos/ChangeLog: * configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2023-08-07GCC: Check if AR works with --plugin and rcH.J. Lu1-3/+11
AR from older binutils doesn't work with --plugin and rc: [hjl@gnu-cfl-2 bin]$ touch foo.c [hjl@gnu-cfl-2 bin]$ ar --plugin /usr/libexec/gcc/x86_64-redhat-linux/10/liblto_plugin.so rc libfoo.a foo.c [hjl@gnu-cfl-2 bin]$ ./ar --plugin /usr/libexec/gcc/x86_64-redhat-linux/10/liblto_plugin.so rc libfoo.a foo.c ./ar: no operation specified [hjl@gnu-cfl-2 bin]$ ./ar --version GNU ar (Linux/GNU Binutils) 2.29.51.0.1.20180112 Copyright (C) 2018 Free Software Foundation, Inc. This program is free software; you may redistribute it under the terms of the GNU General Public License version 3 or (at your option) any later version. This program has absolutely no warranty. [hjl@gnu-cfl-2 bin]$ Check if AR works with --plugin and rc before passing --plugin to AR and RANLIB. ChangeLog: * configure: Regenerated. * libtool.m4 (_LT_CMD_OLD_ARCHIVE): Check if AR works with --plugin and rc before enabling --plugin. config/ChangeLog: * gcc-plugin.m4 (GCC_PLUGIN_OPTION): Check if AR works with --plugin and rc before enabling --plugin. gcc/ChangeLog: * configure: Regenerate. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgm2/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libiberty/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. libphobos/ChangeLog: * configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2023-08-07Sync with binutils: GCC: Pass --plugin to AR and RANLIBH.J. Lu1-2/+25
Sync with binutils for building binutils with LTO: 50ad1254d50 GCC: Pass --plugin to AR and RANLIB Detect GCC LTO plugin. Pass --plugin to AR and RANLIB to support LTO build. ChangeLog: * Makefile.tpl (AR): Add @AR_PLUGIN_OPTION@ (RANLIB): Add @RANLIB_PLUGIN_OPTION@. * configure.ac: Include config/gcc-plugin.m4. AC_SUBST AR_PLUGIN_OPTION and RANLIB_PLUGIN_OPTION. * libtool.m4 (_LT_CMD_OLD_ARCHIVE): Pass --plugin to AR and RANLIB if possible. * Makefile.in: Regenerated. * configure: Likewise. config/ChangeLog: * gcc-plugin.m4 (GCC_PLUGIN_OPTION): New. libiberty/ChangeLog: * Makefile.in (AR): Add @AR_PLUGIN_OPTION@ (RANLIB): Add @RANLIB_PLUGIN_OPTION@. (configure_deps): Depend on ../config/gcc-plugin.m4. * configure.ac: AC_SUBST AR_PLUGIN_OPTION and RANLIB_PLUGIN_OPTION. * aclocal.m4: Regenerated. * configure: Likewise. zlib/ChangeLog: * configure: Regenerated. gcc/ChangeLog: * configure: Regenerate. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgm2/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. libphobos/ChangeLog: * configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate.
2023-05-23Daily bump.GCC Administrator1-0/+6
2023-05-22libobjc: Add local macros to support encode generation [P109913].Iain Sandoe1-0/+5
r14-976-g9907413a3a6aa3 alters code to use the preferred _P-style macros rather than direct comparisons of (for example) tree codes. In the context of libobjc this does not work, since we do not include the relevant headers; the encoding implementation contains a local emulation of the target type layouts. The fix here provides relevant macros local to the use. Signed-off-by: Iain Sandoe <iain@sandoe.co.uk> PR libobjc/109913 libobjc/ChangeLog: * encoding.c (RECORD_OR_UNION_TYPE_P, VECTOR_TYPE_P): New. Co-authored-by: Andrew Pinski <apinski@marvell.com>
2023-01-16Update copyright years.Jakub Jelinek49-49/+49
2023-01-02Update Copyright year in ChangeLog filesJakub Jelinek1-1/+1
2022 -> 2023
2022-11-21changelog: Fix extra space after tab.Martin Liska1-2/+2
2022-10-21Daily bump.GCC Administrator1-0/+5
2022-10-20Make 'autoreconf' work for 'gcc', 'libobjc'Thomas Schwinge2-2/+4
With that, we may then run plain 'autoreconf' for all of GCC's subpackages, instead of for some of those (that don't use Automake) manually having to run the applicable combination of 'aclocal', 'autoconf', 'autoheader'. See also 'AC_CONFIG_MACRO_DIRS'/'AC_CONFIG_MACRO_DIR' usage elsewhere. gcc/ * configure.ac (AC_CONFIG_MACRO_DIRS): Instantiate. * configure: Regenerate. libobjc/ * configure.ac (AC_CONFIG_MACRO_DIRS): Instantiate. * configure: Regenerate.
2022-10-13Daily bump.GCC Administrator1-0/+4
2022-10-12regenerate configure filesMartin Liska1-2/+2
Needed after a recent change. gcc/ChangeLog: * configure: Regenerate. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. liboffloadmic/ChangeLog: * configure: Regenerate. * plugin/configure: Regenerate. libphobos/ChangeLog: * configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2022-10-12Daily bump.GCC Administrator1-0/+5
2022-10-11Generic configury support for shared libs on VxWorksOlivier Hainque1-0/+24
This change adds the configury bits to activate the build of shared libs on VxWorks ports configured with --enable-shared, for libraries variants where this is generally supported (rtp, code model !large - currently not compatible with -fPIC). Set lt_cv_deplibs_check_method in libtool.m4, so the build of libraries know how to establish dependencies. This is useful in configurations such as aarch64 where proper support of LSE relies on accurate dependency information between libstdc++ and libgcc_s to begin with. Regenerate configure scripts to reflect libtool.m4 change. 2022-10-09 Olivier Hainque <hainque@adacore.com> * libtool.m4 (*vxworks*): When enable_shared, set dynamic_linker and friends for rtp !large. Assume the linker has the required abilities and set lt_cv_deplibs_check_method. gcc/ * config.gcc (*vxworks*): Add t-slibgcc fragment if enable_shared. libgcc/ * config.host (*vxworks*): When enable_shared, add libgcc and crtstuff "shared" fragments for rtp except large code model. (aarch64*-wrs-vxworks7*): Remove t-slibgcc-libgcc from the list of fragments. 2022-10-09 Olivier Hainque <hainque@adacore.com> gcc/ * configure: Regenerate. libatomic/ * configure: Regenerate. libbacktrace/ * configure: Regenerate. libcc1/ * configure: Regenerate. libffi/ * configure: Regenerate. libgfortran/ * configure: Regenerate. libgomp/ * configure: Regenerate. libitm/ * configure: Regenerate. libobjc/ * configure: Regenerate. liboffloadmic/ * configure: Regenerate. liboffloadmic/ * plugin/configure: Regenerate. libphobos/ * configure: Regenerate. libquadmath/ * configure: Regenerate. libsanitizer/ * configure: Regenerate. libssp/ * configure: Regenerate. libstdc++-v3/ * configure: Regenerate. libvtv/ * configure: Regenerate. lto-plugin/ * configure: Regenerate. zlib/ * configure: Regenerate.
2022-08-26Daily bump.GCC Administrator1-0/+4
2022-08-25regenerate configure files and config.h.in filesMartin Liska1-3/+3
fixincludes/ChangeLog: * config.h.in: Regenerate. * configure: Regenerate. libada/ChangeLog: * configure: Regenerate. libiberty/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. liboffloadmic/ChangeLog: * configure: Regenerate. * plugin/configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2022-01-03Update copyright years.Jakub Jelinek49-49/+49
2022-01-03Update Copyright in ChangeLog filesJakub Jelinek1-1/+1
Do this separately from all other Copyright updates, as ChangeLog files can be modified only separately.
2021-01-06Daily bump.GCC Administrator1-0/+4
2021-01-05Update GNU/Hurd configure supportSamuel Thibault1-11/+1
ChangeLog: * libtool.m4: Match gnu* along other GNU systems. * libgo/config/libtool.m4: Match gnu* along other GNU systems. * libgo/configure: Re-generate. libffi/ * configure: Re-generate. libgomp/ * configure: Re-generate. gcc/ * configure: Re-generate. libatomic/ * configure: Re-generate. libbacktrace/ * configure: Re-generate. libcc1/ * configure: Re-generate. libgfortran/ * configure: Re-generate. libgomp/ * configure: Re-generate. libhsail-rt/ * configure: Re-generate. libitm/ * configure: Re-generate. libobjc/ * configure: Re-generate. liboffloadmic/ * configure: Re-generate. * plugin/configure: Re-generate. libphobos/ * configure: Re-generate. libquadmath/ * configure: Re-generate. libsanitizer/ * configure: Re-generate. libssp/ * configure: Re-generate. libstdc++-v3/ * configure: Re-generate. libvtv/ * configure: Re-generate. lto-plugin/ * configure: Re-generate. zlib/ * configure: Re-generate.
2021-01-04Update copyright years.Jakub Jelinek49-49/+49
2021-01-04Update Copyright in ChangeLog filesJakub Jelinek1-1/+1
Do this separately from all other Copyright updates, as ChangeLog files can be modified only separately.
2020-12-06Daily bump.GCC Administrator1-0/+5
2020-12-05Darwin : Update libtool and dependencies for Darwin20 [PR97865]Iain Sandoe1-16/+18
The change in major version (and the increment from Darwin19 to 20) caused libtool tests to fail which resulted in incorrect build settings for shared libraries. We take this opportunity to sort out the shared undefined symbols state rather than propagating the current unsound behaviour into a new rev. This change means that we default to the case that missing symbols are considered an error, and if one wants to allow this intentionally, the confiuration for that case should be set appropriately. Three existing cases need undefined dynamic lookup: libitm, where there is already a configuration mechanism to add the flags. libcc1, where we add simple configuration to add the flags for Darwin. libsanitizer, where we can add to the existing extra flags. libcc1/ChangeLog: PR target/97865 * Makefile.am: Add dynamic_lookup to LD flags for Darwin. * configure.ac: Test for Darwin host and set a flag. * Makefile.in: Regenerate. * configure: Regenerate. libitm/ChangeLog: PR target/97865 * configure.tgt: Add dynamic_lookup to XLDFLAGS for Darwin. * configure: Regenerate. libsanitizer/ChangeLog: PR target/97865 * configure.tgt: Add dynamic_lookup to EXTRA_CXXFLAGS for Darwin. * configure: Regenerate. ChangeLog: PR target/97865 * libtool.m4: Update handling of Darwin platform link flags for Darwin20. gcc/ChangeLog: PR target/97865 * configure: Regenerate. libatomic/ChangeLog: PR target/97865 * configure: Regenerate. libbacktrace/ChangeLog: PR target/97865 * configure: Regenerate. libffi/ChangeLog: PR target/97865 * configure: Regenerate. libgfortran/ChangeLog: PR target/97865 * configure: Regenerate. libgomp/ChangeLog: PR target/97865 * configure: Regenerate. libhsail-rt/ChangeLog: PR target/97865 * configure: Regenerate. libobjc/ChangeLog: PR target/97865 * configure: Regenerate. libphobos/ChangeLog: PR target/97865 * configure: Regenerate. libquadmath/ChangeLog: PR target/97865 * configure: Regenerate. libssp/ChangeLog: PR target/97865 * configure: Regenerate. libstdc++-v3/ChangeLog: PR target/97865 * configure: Regenerate. libvtv/ChangeLog: PR target/97865 * configure: Regenerate. zlib/ChangeLog: PR target/97865 * configure: Regenerate.
2020-11-30Daily bump.GCC Administrator1-0/+4
2020-11-29Fix hppa64-hpux11 build to remove source paths from embedded path.John David Anglin1-2/+2
This change adds the +nodefaultrpath ld option to remove all library paths that were specified with the -L option from the embedded path. 2020-11-29 John David Anglin <danglin@gcc.gnu.org> ChangeLog: * libtool.m4 (archive_cmds): Add +nodefaultrpath ld option on hppa64-*-hpux11*. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libhsail-rt/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. liboffloadmic/ChangeLog: * configure: Regenerate. * plugin/configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2020-10-12Daily bump.GCC Administrator1-0/+5
2020-10-11libobjc, Darwin : Fix powerpc encoding regression.Iain Sandoe1-2/+1
This corrects a typo in the recipe for the special type alignment rules that are used for 32bit powerpc Darwin platforms. libobjc/ChangeLog: * encoding.c (_darwin_rs6000_special_round_type_align): Use DFMode in the emulation of the special round type.
2020-05-30Daily bump.GCC Administrator1-0/+5
2020-05-29Avoid nested save_CFLAGS and save_LDFLAGSH.J. Lu1-4/+5
Avoid nested save_CFLAGS and save_LDFLAGS by replacing save_CFLAGS and save_LDFLAGS with cet_save_CFLAGS and cet_save_LDFLAGS in cet.m4. config/ PR bootstrap/95413 * cet.m4: Replace save_CFLAGS and save_LDFLAGS with cet_save_CFLAGS and cet_save_LDFLAGS. gcc/ PR bootstrap/95413 * configure: Regenerated. libatomic/ PR bootstrap/95413 * configure: Regenerated. libbacktrace/ PR bootstrap/95413 * configure: Regenerated. libcc1/ PR bootstrap/95413 * configure: Regenerated. libcpp/ PR bootstrap/95413 * configure: Regenerated. libdecnumber/ PR bootstrap/95413 * configure: Regenerated. libgcc/ PR bootstrap/95413 * configure: Regenerated. libgfortran/ PR bootstrap/95413 * configure: Regenerated. libgomp/ PR bootstrap/95413 * configure: Regenerated. libiberty/ PR bootstrap/95413 * configure: Regenerated. libitm/ PR bootstrap/95413 * configure: Regenerated. libobjc/ PR bootstrap/95413 * configure: Regenerated. libphobos/ PR bootstrap/95413 * configure: Regenerated. libquadmath/ PR bootstrap/95413 * configure: Regenerated. libsanitizer/ PR bootstrap/95413 * configure: Regenerated. libssp/ PR bootstrap/95413 * configure: Regenerated. libstdc++-v3/ PR bootstrap/95413 * configure: Regenerated. libvtv/ PR bootstrap/95413 * configure: Regenerated. lto-plugin/ PR bootstrap/95413 * configure: Regenerated. zlib/ PR bootstrap/95413 * configure: Regenerated.
2020-05-15x86: Also check if -fcf-protection worksH.J. Lu2-2/+10
When defaulting CET run-time support to auto, check if -fcf-protection works. Even if the stage1 GCC doesn't support -fcf-protection, since the final GCC does, CET run-time support will be enabled by default if binutils support CET. config/ PR bootstrap/95147 * cet.m4 (GCC_CET_FLAGS): Also check if -fcf-protection works when defaulting to auto. libatomic/ PR bootstrap/95147 * configure: Regenerated. libbacktrace/ PR bootstrap/95147 * configure: Regenerated. libgcc/ PR bootstrap/95147 * configure: Regenerated. libgfortran/ PR bootstrap/95147 * configure: Regenerated. libgomp/ PR bootstrap/95147 * configure: Regenerated. libitm/ PR bootstrap/95147 * configure: Regenerated. libobjc/ PR bootstrap/95147 * configure: Regenerated. libphobos/ PR bootstrap/95147 * configure: Regenerated. libquadmath/ PR bootstrap/95147 * configure: Regenerated. libsanitizer/ PR bootstrap/95147 * configure: Regenerated. libssp/ PR bootstrap/95147 * configure: Regenerated. libstdc++-v3/ PR bootstrap/95147 * configure: Regenerated. libvtv/ PR bootstrap/95147 * configure: Regenerated. zlib/ PR bootstrap/95147 * configure: Regenerated.
2020-05-14x86: Default CET run-time support to autoH.J. Lu2-2/+6
CET has been added since GCC 8. This patch defaults CET run-time support to auto. It enables CET run-time support if asssembler supports CET instructions and multi-byte NOPs are enabled via SSE2. config/ * cet.m4 (GCC_CET_FLAGS): Change default to auto. gcc/ * configure: Regenerated. libatomic/ * configure: Regenerated. libbacktrace/ * configure: Regenerated. libcc1/ * configure: Regenerated. libcpp/ * configure: Regenerated. libdecnumber/ * configure: Regenerated. libgcc/ * configure: Regenerated. libgfortran/ * configure: Regenerated. libgomp/ * configure: Regenerated. libitm/ * configure: Regenerated. libobjc/ * configure: Regenerated. libquadmath/ * configure: Regenerated. libsanitizer/ * configure: Regenerated. libssp/ * configure: Regenerated. libstdc++-v3/ * configure: Regenerated. libvtv/ * configure: Regenerated. zlib/ * configure: Regenerated.
2020-02-12Use a non-empty test program to test ability to link.Sandra Loosemore2-2/+9
On bare-metal targets, I/O support is typically provided by a BSP and requires a linker script and/or hosting library to be specified on the linker command line. Linking an empty program with the default linker script may succeed, however, which confuses libstdc++ configuration when programs that probe for the presence of various I/O features fail with link errors. 2020-02-12 Sandra Loosemore <sandra@codesourcery.com> PR libstdc++/79193 PR libstdc++/88999 config/ * no-executables.m4: Use a non-empty program to test for linker support. libgcc/ * configure: Regenerated. libgfortran/ * configure: Regenerated. libiberty/ * configure: Regenerated. libitm/ * configure: Regenerated. libobjc/ * configure: Regenerated. libquadmath/ * configure: Regenerated. libssp/ * configure: Regenerated. libstdc++v-3/ * configure: Regenerated.
2020-01-24Add `--with-toolexeclibdir=' configuration optionMaciej W. Rozycki5-4/+49
Provide means, in the form of a `--with-toolexeclibdir=' configuration option, to override the default installation directory for target libraries, otherwise known as $toolexeclibdir. This is so that it is possible to get newly-built libraries, particularly the shared ones, installed in a common place, so that they can be readily used by the target system as their host libraries, possibly over NFS, without a need to manually copy them over from the currently hardcoded location they would otherwise be installed in. In the presence of the `--enable-version-specific-runtime-libs' option and for configurations building native GCC the option is ignored. config/ * toolexeclibdir.m4: New file. gcc/ * doc/install.texi (Cross-Compiler-Specific Options): Document `--with-toolexeclibdir' option. libada/ * Makefile.in (configure_deps): Add `toolexeclibdir.m4'. * configure.ac: Handle `--with-toolexeclibdir='. * configure: Regenerate. libatomic/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * testsuite/Makefile.in: Regenerate. libffi/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * include/Makefile.in: Regenerate. * man/Makefile.in: Regenerate. * testsuite/Makefile.in: Regenerate. libgcc/ * Makefile.in (configure_deps): Add `toolexeclibdir.m4'. * configure.ac: Handle `--with-toolexeclibdir='. * configure: Regenerate. libgfortran/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. libgomp/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * testsuite/Makefile.in: Regenerate. libhsail-rt/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. libitm/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * testsuite/Makefile.in: Regenerate. libobjc/ * Makefile.in (aclocal_deps): Add `toolexeclibdir.m4'. * aclocal.m4: Include `toolexeclibdir.m4'. * configure.ac: Handle `--with-toolexeclibdir='. * configure: Regenerate. liboffloadmic/ * plugin/configure.ac: Handle `--with-toolexeclibdir='. * plugin/Makefile.in: Regenerate. * plugin/aclocal.m4: Regenerate. * plugin/configure: Regenerate. * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. libphobos/ * m4/druntime.m4: Handle `--with-toolexeclibdir='. * m4/Makefile.in: Regenerate. * libdruntime/Makefile.in: Regenerate. * src/Makefile.in: Regenerate. * testsuite/Makefile.in: Regenerate. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. libquadmath/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. libsanitizer/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * asan/Makefile.in: Regenerate. * interception/Makefile.in: Regenerate. * libbacktrace/Makefile.in: Regenerate. * lsan/Makefile.in: Regenerate. * sanitizer_common/Makefile.in: Regenerate. * tsan/Makefile.in: Regenerate. * ubsan/Makefile.in: Regenerate. libssp/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. libstdc++-v3/ * acinclude.m4: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. * include/Makefile.in: Regenerate. * libsupc++/Makefile.in: Regenerate. * po/Makefile.in: Regenerate. * python/Makefile.in: Regenerate. * src/Makefile.in: Regenerate. * src/c++11/Makefile.in: Regenerate. * src/c++17/Makefile.in: Regenerate. * src/c++98/Makefile.in: Regenerate. * src/filesystem/Makefile.in: Regenerate. * testsuite/Makefile.in: Regenerate. libvtv/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * testsuite/Makefile.in: Regenerate. zlib/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate.
2020-01-01Fix windows libobjc build (PR libobjc/93099)Andrew Pinski2-1/+7
2020-01-01 Andrew Pinski <pinskia@gmail.com> PR libobjc/93099 * objc/objc-decls.h (objc_EXPORT): Define it to extern for DLL_EXPORT define case. From-SVN: r279822
2020-01-01Update copyright years.Jakub Jelinek50-50/+54
From-SVN: r279813
2019-11-26Unbreak objc build – with --enable-maintainer-modeTobias Burnus2-1/+5
* Makefile.in (aclocal_deps): Fix path to cet.m4. From-SVN: r278732
2019-09-27Regenerate `configure' scripts for `uclinuxfdpiceabi' libtool.m4 updateMaciej W. Rozycki2-6/+15
A change made with r275564 ("[ARM/FDPIC v6 02/24] [ARM] FDPIC: Handle arm*-*-uclinuxfdpiceabi in configure scripts") to libtool.m4 has not regenerated all the `configure' scripts affected. Fix it. gcc/ * configure: Regenerate. libatomic/ * configure: Regenerate. libbacktrace/ * configure: Regenerate. libcc1/ * configure: Regenerate. libffi/ * configure: Regenerate. libgfortran/ * configure: Regenerate. libgomp/ * configure: Regenerate. libhsail-rt/ * configure: Regenerate. libitm/ * configure: Regenerate. libobjc/ * configure: Regenerate. liboffloadmic/ * configure: Regenerate. libphobos/ * configure: Regenerate. libquadmath/ * configure: Regenerate. libsanitizer/ * configure: Regenerate. libssp/ * configure: Regenerate. libstdc++-v3/ * configure: Regenerate. libvtv/ * configure: Regenerate. lto-plugin/ * configure: Regenerate. zlib/ * configure: Regenerate. From-SVN: r276213
2019-04-23re PR target/89093 (C++ exception handling clobbers d8 VFP register)Ramana Radhakrishnan2-0/+9
PR target/89093 * config/arm/arm.c (aapcs_vfp_is_call_or_return_candidate): Diagnose if used with general-regs-only. (arm_conditional_register_usage): Don't add non-general regs if general-regs-only. (arm_valid_target_attribute_rec): Handle general-regs-only. * config/arm/arm.h (TARGET_HARD_FLOAT): Return false if general-regs-only. (TARGET_HARD_FLOAT_SUB): Define. (TARGET_SOFT_FLOAT): Define as negation of TARGET_HARD_FLOAT_SUB. (TARGET_REALLY_IWMMXT): Add && !TARGET_GENERAL_REGS_ONLY. (TARGET_REALLY_IWMMXT2): Likewise. * config/arm/arm.opt: Add -mgeneral-regs-only. * doc/extend.texi: Document ARM general-regs-only target. * doc/invoke.texi: Document ARM -mgeneral-regs-only. libgcc/ * config/arm/pr-support.c: Add #pragma GCC target("general-regs-only"). * config/arm/unwind-arm.c: Likewise. * unwind-c.c (PERSONALITY_FUNCTION): Add general-regs-only target attribute for ARM. libobjc/ * exception.c (PERSONALITY_FUNCTION): Add general-regs-only target attribute for ARM. libphobos/ * libdruntime/gcc/deh.d: Import gcc.attribute. (personality_fn_attributes): New enum. (scanLSDA, CONTINUE_UNWINDING, gdc_personality, __gdc_personality): Add @personality_fn_attributes. libstdc++-v3/ * libsupc++/eh_personality.cc (PERSONALITY_FUNCTION): Add general-regs-only target attribute for ARM. Co-Authored-By: Bernd Edlinger <bernd.edlinger@hotmail.de> Co-Authored-By: Jakub Jelinek <jakub@redhat.com> From-SVN: r270504
2019-03-06encoding.c (DFmode): #undef before #define.Uros Bizjak2-95/+99
* encoding.c (DFmode): #undef before #define. From-SVN: r269429
2019-01-09PR other/16615 [4/5]Sandra Loosemore2-2/+8
2019-01-09 Sandra Loosemore <sandra@codesourcery.com> PR other/16615 [4/5] gcc/ * config/pa/pa.c: Change "can not" to "cannot". * gimple-ssa-evrp-analyze.c: Likewise. * ipa-icf.c: Likewise. * ipa-polymorphic-call.c: Likewise. * ipa-pure-const.c: Likewise. * lra-constraints.c: Likewise. * lra-remat.c: Likewise. * reload1.c: Likewise. * reorg.c: Likewise. * tree-ssa-uninit.c: Likewise. gcc/ada/ * exp_ch11.adb: Change "can not" to "cannot". * sem_ch4.adb: Likewise. gcc/fortran/ * expr.c: Change "can not" to "cannot". libobjc/ * objc/runtime.h: Change "can not" to "cannot". From-SVN: r267786
2019-01-09PR other/16615 [1/5]Sandra Loosemore4-6/+14
2019-01-09 Sandra Loosemore <sandra@codesourcery.com> PR other/16615 [1/5] contrib/ * mklog: Mechanically replace "can not" with "cannot". gcc/ * Makefile.in: Mechanically replace "can not" with "cannot". * alias.c: Likewise. * builtins.c: Likewise. * calls.c: Likewise. * cgraph.c: Likewise. * cgraph.h: Likewise. * cgraphclones.c: Likewise. * cgraphunit.c: Likewise. * combine-stack-adj.c: Likewise. * combine.c: Likewise. * common/config/i386/i386-common.c: Likewise. * config/aarch64/aarch64.c: Likewise. * config/alpha/sync.md: Likewise. * config/arc/arc.c: Likewise. * config/arc/predicates.md: Likewise. * config/arm/arm-c.c: Likewise. * config/arm/arm.c: Likewise. * config/arm/arm.h: Likewise. * config/arm/arm.md: Likewise. * config/arm/cortex-r4f.md: Likewise. * config/csky/csky.c: Likewise. * config/csky/csky.h: Likewise. * config/darwin-f.c: Likewise. * config/epiphany/epiphany.md: Likewise. * config/i386/i386.c: Likewise. * config/i386/sol2.h: Likewise. * config/m68k/m68k.c: Likewise. * config/mcore/mcore.h: Likewise. * config/microblaze/microblaze.md: Likewise. * config/mips/20kc.md: Likewise. * config/mips/sb1.md: Likewise. * config/nds32/nds32.c: Likewise. * config/nds32/predicates.md: Likewise. * config/pa/pa.c: Likewise. * config/rs6000/e300c2c3.md: Likewise. * config/rs6000/rs6000.c: Likewise. * config/s390/s390.h: Likewise. * config/sh/sh.c: Likewise. * config/sh/sh.md: Likewise. * config/spu/vmx2spu.h: Likewise. * cprop.c: Likewise. * dbxout.c: Likewise. * df-scan.c: Likewise. * doc/cfg.texi: Likewise. * doc/extend.texi: Likewise. * doc/fragments.texi: Likewise. * doc/gty.texi: Likewise. * doc/invoke.texi: Likewise. * doc/lto.texi: Likewise. * doc/md.texi: Likewise. * doc/objc.texi: Likewise. * doc/rtl.texi: Likewise. * doc/tm.texi: Likewise. * dse.c: Likewise. * emit-rtl.c: Likewise. * emit-rtl.h: Likewise. * except.c: Likewise. * expmed.c: Likewise. * expr.c: Likewise. * fold-const.c: Likewise. * genautomata.c: Likewise. * gimple-fold.c: Likewise. * hard-reg-set.h: Likewise. * ifcvt.c: Likewise. * ipa-comdats.c: Likewise. * ipa-cp.c: Likewise. * ipa-devirt.c: Likewise. * ipa-fnsummary.c: Likewise. * ipa-icf.c: Likewise. * ipa-inline-transform.c: Likewise. * ipa-inline.c: Likewise. * ipa-polymorphic-call.c: Likewise. * ipa-profile.c: Likewise. * ipa-prop.c: Likewise. * ipa-pure-const.c: Likewise. * ipa-reference.c: Likewise. * ipa-split.c: Likewise. * ipa-visibility.c: Likewise. * ipa.c: Likewise. * ira-build.c: Likewise. * ira-color.c: Likewise. * ira-conflicts.c: Likewise. * ira-costs.c: Likewise. * ira-int.h: Likewise. * ira-lives.c: Likewise. * ira.c: Likewise. * ira.h: Likewise. * loop-invariant.c: Likewise. * loop-unroll.c: Likewise. * lower-subreg.c: Likewise. * lra-assigns.c: Likewise. * lra-constraints.c: Likewise. * lra-eliminations.c: Likewise. * lra-lives.c: Likewise. * lra-remat.c: Likewise. * lra-spills.c: Likewise. * lra.c: Likewise. * lto-cgraph.c: Likewise. * lto-streamer-out.c: Likewise. * postreload-gcse.c: Likewise. * predict.c: Likewise. * profile-count.h: Likewise. * profile.c: Likewise. * recog.c: Likewise. * ree.c: Likewise. * reload.c: Likewise. * reload1.c: Likewise. * reorg.c: Likewise. * resource.c: Likewise. * rtl.def: Likewise. * rtl.h: Likewise. * rtlanal.c: Likewise. * sched-deps.c: Likewise. * sched-ebb.c: Likewise. * sched-rgn.c: Likewise. * sel-sched-ir.c: Likewise. * sel-sched.c: Likewise. * shrink-wrap.c: Likewise. * simplify-rtx.c: Likewise. * symtab.c: Likewise. * target.def: Likewise. * toplev.c: Likewise. * tree-call-cdce.c: Likewise. * tree-cfg.c: Likewise. * tree-complex.c: Likewise. * tree-core.h: Likewise. * tree-eh.c: Likewise. * tree-inline.c: Likewise. * tree-loop-distribution.c: Likewise. * tree-nrv.c: Likewise. * tree-profile.c: Likewise. * tree-sra.c: Likewise. * tree-ssa-alias.c: Likewise. * tree-ssa-dce.c: Likewise. * tree-ssa-dom.c: Likewise. * tree-ssa-forwprop.c: Likewise. * tree-ssa-loop-im.c: Likewise. * tree-ssa-loop-ivcanon.c: Likewise. * tree-ssa-loop-ivopts.c: Likewise. * tree-ssa-loop-niter.c: Likewise. * tree-ssa-phionlycprop.c: Likewise. * tree-ssa-phiopt.c: Likewise. * tree-ssa-propagate.c: Likewise. * tree-ssa-threadedge.c: Likewise. * tree-ssa-threadupdate.c: Likewise. * tree-ssa-uninit.c: Likewise. * tree-ssanames.c: Likewise. * tree-streamer-out.c: Likewise. * tree.c: Likewise. * tree.h: Likewise. * vr-values.c: Likewise. gcc/ada/ * exp_ch9.adb: Mechanically replace "can not" with "cannot". * libgnat/s-regpat.ads: Likewise. * par-ch4.adb: Likewise. * set_targ.adb: Likewise. * types.ads: Likewise. gcc/cp/ * cp-tree.h: Mechanically replace "can not" with "cannot". * parser.c: Likewise. * pt.c: Likewise. gcc/fortran/ * class.c: Mechanically replace "can not" with "cannot". * decl.c: Likewise. * expr.c: Likewise. * gfc-internals.texi: Likewise. * intrinsic.texi: Likewise. * invoke.texi: Likewise. * io.c: Likewise. * match.c: Likewise. * parse.c: Likewise. * primary.c: Likewise. * resolve.c: Likewise. * symbol.c: Likewise. * trans-array.c: Likewise. * trans-decl.c: Likewise. * trans-intrinsic.c: Likewise. * trans-stmt.c: Likewise. gcc/go/ * go-backend.c: Mechanically replace "can not" with "cannot". * go-gcc.cc: Likewise. gcc/lto/ * lto-partition.c: Mechanically replace "can not" with "cannot". * lto-symtab.c: Likewise. * lto.c: Likewise. gcc/objc/ * objc-act.c: Mechanically replace "can not" with "cannot". libbacktrace/ * backtrace.h: Mechanically replace "can not" with "cannot". libgcc/ * config/c6x/libunwind.S: Mechanically replace "can not" with "cannot". * config/tilepro/atomic.h: Likewise. * config/vxlib-tls.c: Likewise. * generic-morestack-thread.c: Likewise. * generic-morestack.c: Likewise. * mkmap-symver.awk: Likewise. libgfortran/ * caf/single.c: Mechanically replace "can not" with "cannot". * io/unit.c: Likewise. libobjc/ * class.c: Mechanically replace "can not" with "cannot". * objc/runtime.h: Likewise. * sendmsg.c: Likewise. liboffloadmic/ * include/coi/common/COIResult_common.h: Mechanically replace "can not" with "cannot". * include/coi/source/COIBuffer_source.h: Likewise. libstdc++-v3/ * include/ext/bitmap_allocator.h: Mechanically replace "can not" with "cannot". From-SVN: r267783
generated by cgit v1.1 at 2024-10-19 13:13:04 +0000