aboutsummaryrefslogtreecommitdiff
path: root/libiberty/configure
AgeCommit message (Collapse)AuthorFilesLines
2023-08-07Deprecate a.out support for NetBSD targets.John Ericson1-3/+1
As discussed previously, a.out support is now quite deprecated, and in some cases removed, in both Binutils itself and NetBSD, so this legacy default makes little sense. `netbsdelf*` and `netbsdaout*` still work allowing the user to be explicit about there choice. Additionally, the configure script warns about the change as Nick Clifton requested. One possible concern was the status of NetBSD on NS32K, where only a.out was supported. But per [1] NetBSD has removed support, and if it were to come back, it would be with ELF. The binutils implementation is therefore marked obsolete, per the instructions in the last message. With that patch and this one applied, I have confirmed the following: --target=i686-unknown-netbsd --target=i686-unknown-netbsdelf builds completely --target=i686-unknown-netbsdaout properly fails because target is deprecated. --target=vax-unknown-netbsdaout builds completely except for gas, where the target is deprecated. [1]: https://mail-index.netbsd.org/tech-toolchain/2021/07/19/msg004025.html config/ChangeLog: * picflag.m4: Simplify SHmedia NetBSD match by presuming ELF. gcc/ChangeLog: * configure: Regenerate. libada/ChangeLog: * configure: Regenerate. libgcc/ChangeLog: * configure: Regenerate. libiberty/ChangeLog: * configure: Regenerate.
2023-08-07GCC: Check if AR works with --plugin and rcH.J. Lu1-0/+103
AR from older binutils doesn't work with --plugin and rc: [hjl@gnu-cfl-2 bin]$ touch foo.c [hjl@gnu-cfl-2 bin]$ ar --plugin /usr/libexec/gcc/x86_64-redhat-linux/10/liblto_plugin.so rc libfoo.a foo.c [hjl@gnu-cfl-2 bin]$ ./ar --plugin /usr/libexec/gcc/x86_64-redhat-linux/10/liblto_plugin.so rc libfoo.a foo.c ./ar: no operation specified [hjl@gnu-cfl-2 bin]$ ./ar --version GNU ar (Linux/GNU Binutils) 2.29.51.0.1.20180112 Copyright (C) 2018 Free Software Foundation, Inc. This program is free software; you may redistribute it under the terms of the GNU General Public License version 3 or (at your option) any later version. This program has absolutely no warranty. [hjl@gnu-cfl-2 bin]$ Check if AR works with --plugin and rc before passing --plugin to AR and RANLIB. ChangeLog: * configure: Regenerated. * libtool.m4 (_LT_CMD_OLD_ARCHIVE): Check if AR works with --plugin and rc before enabling --plugin. config/ChangeLog: * gcc-plugin.m4 (GCC_PLUGIN_OPTION): Check if AR works with --plugin and rc before enabling --plugin. gcc/ChangeLog: * configure: Regenerate. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgm2/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libiberty/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. libphobos/ChangeLog: * configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2023-08-07Sync with binutils: GCC: Pass --plugin to AR and RANLIBH.J. Lu1-0/+37
Sync with binutils for building binutils with LTO: 50ad1254d50 GCC: Pass --plugin to AR and RANLIB Detect GCC LTO plugin. Pass --plugin to AR and RANLIB to support LTO build. ChangeLog: * Makefile.tpl (AR): Add @AR_PLUGIN_OPTION@ (RANLIB): Add @RANLIB_PLUGIN_OPTION@. * configure.ac: Include config/gcc-plugin.m4. AC_SUBST AR_PLUGIN_OPTION and RANLIB_PLUGIN_OPTION. * libtool.m4 (_LT_CMD_OLD_ARCHIVE): Pass --plugin to AR and RANLIB if possible. * Makefile.in: Regenerated. * configure: Likewise. config/ChangeLog: * gcc-plugin.m4 (GCC_PLUGIN_OPTION): New. libiberty/ChangeLog: * Makefile.in (AR): Add @AR_PLUGIN_OPTION@ (RANLIB): Add @RANLIB_PLUGIN_OPTION@. (configure_deps): Depend on ../config/gcc-plugin.m4. * configure.ac: AC_SUBST AR_PLUGIN_OPTION and RANLIB_PLUGIN_OPTION. * aclocal.m4: Regenerated. * configure: Likewise. zlib/ChangeLog: * configure: Regenerated. gcc/ChangeLog: * configure: Regenerate. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgm2/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. libphobos/ChangeLog: * configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate.
2023-06-15configure: Implement --enable-host-pieMarek Polacek1-2/+2
[ This is my third attempt to add this configure option. The first version was approved but it came too late in the development cycle. The second version was also approved, but I had to revert it: <https://gcc.gnu.org/pipermail/gcc-patches/2022-November/607082.html>. I've fixed the problem (by moving $(PICFLAG) from INTERNAL_CFLAGS to ALL_COMPILERFLAGS). Another change is that since r13-4536 I no longer need to touch Makefile.def, so this patch is simplified. ] This patch implements the --enable-host-pie configure option which makes the compiler executables PIE. This can be used to enhance protection against ROP attacks, and can be viewed as part of a wider trend to harden binaries. It is similar to the option --enable-host-shared, except that --e-h-s won't add -shared to the linker flags whereas --e-h-p will add -pie. It is different from --enable-default-pie because that option just adds an implicit -fPIE/-pie when the compiler is invoked, but the compiler itself isn't PIE. Since r12-5768-gfe7c3ecf, PCH works well with PIE, so there are no PCH regressions. When building the compiler, the build process may use various in-tree libraries; these need to be built with -fPIE so that it's possible to use them when building a PIE. For instance, when --with-included-gettext is in effect, intl object files must be compiled with -fPIE. Similarly, when building in-tree gmp, isl, mpfr and mpc, they must be compiled with -fPIE. With this patch and --enable-host-pie used to configure gcc: $ file gcc/cc1{,plus,obj,gm2} gcc/f951 gcc/lto1 gcc/cpp gcc/go1 gcc/rust1 gcc/gnat1 gcc/cc1: ELF 64-bit LSB pie executable, x86-64, version 1 (GNU/Linux), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=98e22cde129d304aa6f33e61b1c39e144aeb135e, for GNU/Linux 3.2.0, with debug_info, not stripped gcc/cc1plus: ELF 64-bit LSB pie executable, x86-64, version 1 (GNU/Linux), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=859d1ea37e43dfe50c18fd4e3dd9a34bb1db8f77, for GNU/Linux 3.2.0, with debug_info, not stripped gcc/cc1obj: ELF 64-bit LSB pie executable, x86-64, version 1 (GNU/Linux), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=1964f8ecee6163182bc26134e2ac1f324816e434, for GNU/Linux 3.2.0, with debug_info, not stripped gcc/cc1gm2: ELF 64-bit LSB pie executable, x86-64, version 1 (GNU/Linux), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=a396672c7ff913d21855829202e7b02ecf42ff4c, for GNU/Linux 3.2.0, with debug_info, not stripped gcc/f951: ELF 64-bit LSB pie executable, x86-64, version 1 (GNU/Linux), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=59c523db893186547ac75c7a71f48be0a461c06b, for GNU/Linux 3.2.0, with debug_info, not stripped gcc/lto1: ELF 64-bit LSB pie executable, x86-64, version 1 (GNU/Linux), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=084a7b77df7be2d63c2d4c655b5bbc3fcdb6038d, for GNU/Linux 3.2.0, with debug_info, not stripped gcc/cpp: ELF 64-bit LSB pie executable, x86-64, version 1 (GNU/Linux), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=3503bf8390d219a10d6653b8560aa21158132168, for GNU/Linux 3.2.0, with debug_info, not stripped gcc/go1: ELF 64-bit LSB pie executable, x86-64, version 1 (GNU/Linux), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=988cc673af4fba5dcb482f4b34957b99050a68c5, for GNU/Linux 3.2.0, with debug_info, not stripped gcc/rust1: ELF 64-bit LSB pie executable, x86-64, version 1 (GNU/Linux), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=b6a5d3d514446c4dcdee0707f086ab9b274a8a3c, for GNU/Linux 3.2.0, with debug_info, not stripped gcc/gnat1: ELF 64-bit LSB pie executable, x86-64, version 1 (GNU/Linux), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=bb11ccdc2c366fe3fe0980476bcd8ca19b67f9dc, for GNU/Linux 3.2.0, with debug_info, not stripped I plan to add an option to link with -Wl,-z,now. Bootstrapped on x86_64-pc-linux-gnu with --with-included-gettext --enable-host-pie as well as without --enable-host-pie. Also tested on a Debian system where the system gcc was configured with --enable-default-pie. Co-Authored by: Iain Sandoe <iain@sandoe.co.uk> ChangeLog: * configure.ac (--enable-host-pie): New check. Set PICFLAG after this check. * configure: Regenerate. c++tools/ChangeLog: * Makefile.in: Rename PIEFLAG to PICFLAG. Set LD_PICFLAG. Use it. Use pic/libiberty.a if PICFLAG is set. * configure.ac (--enable-default-pie): Set PICFLAG instead of PIEFLAG. (--enable-host-pie): New check. * configure: Regenerate. fixincludes/ChangeLog: * Makefile.in: Set and use PICFLAG and LD_PICFLAG. Use the "pic" build of libiberty if PICFLAG is set. * configure.ac: * configure: Regenerate. gcc/ChangeLog: * Makefile.in: Set LD_PICFLAG. Use it. Set enable_host_pie. Remove NO_PIE_CFLAGS and NO_PIE_FLAG. Pass LD_PICFLAG to ALL_LINKERFLAGS. Use the "pic" build of libiberty if --enable-host-pie. * configure.ac (--enable-host-shared): Don't set PICFLAG here. (--enable-host-pie): New check. Set PICFLAG and LD_PICFLAG after this check. * configure: Regenerate. * doc/install.texi: Document --enable-host-pie. gcc/ada/ChangeLog: * gcc-interface/Make-lang.in (ALL_ADAFLAGS): Remove NO_PIE_CFLAGS. Add PICFLAG. Use PICFLAG when building ada/b_gnat1.o and ada/b_gnatb.o. * gcc-interface/Makefile.in: Use pic/libiberty.a if PICFLAG is set. Remove NO_PIE_FLAG. gcc/m2/ChangeLog: * Make-lang.in: New var, GM2_PICFLAGS. Use it. gcc/d/ChangeLog: * Make-lang.in: Remove NO_PIE_CFLAGS. intl/ChangeLog: * Makefile.in: Use @PICFLAG@ in COMPILE as well. * configure.ac (--enable-host-shared): Don't set PICFLAG here. (--enable-host-pie): New check. Set PICFLAG after this check. * configure: Regenerate. libcody/ChangeLog: * Makefile.in: Pass LD_PICFLAG to LDFLAGS. * configure.ac (--enable-host-shared): Don't set PICFLAG here. (--enable-host-pie): New check. Set PICFLAG and LD_PICFLAG after this check. * configure: Regenerate. libcpp/ChangeLog: * configure.ac (--enable-host-shared): Don't set PICFLAG here. (--enable-host-pie): New check. Set PICFLAG after this check. * configure: Regenerate. libdecnumber/ChangeLog: * configure.ac (--enable-host-shared): Don't set PICFLAG here. (--enable-host-pie): New check. Set PICFLAG after this check. * configure: Regenerate. libiberty/ChangeLog: * configure.ac: Also set shared when enable_host_pie. * configure: Regenerate. zlib/ChangeLog: * configure.ac (--enable-host-shared): Don't set PICFLAG here. (--enable-host-pie): New check. Set PICFLAG after this check. * configure: Regenerate.
2022-11-22Revert "configure: Implement --enable-host-pie"Marek Polacek1-2/+2
This reverts commit 251c72a68af3a8b0638705b73ef120ffdf0053eb.
2022-11-22configure: Implement --enable-host-pieMarek Polacek1-2/+2
This patch implements the --enable-host-pie configure option which makes the compiler executables PIE. This can be used to enhance protection against ROP attacks, and can be viewed as part of a wider trend to harden binaries. It is similar to the option --enable-host-shared, except that --e-h-s won't add -shared to the linker flags whereas --e-h-p will add -pie. It is different from --enable-default-pie because that option just adds an implicit -fPIE/-pie when the compiler is invoked, but the compiler itself isn't PIE. Since r12-5768-gfe7c3ecf, PCH works well with PIE, so there are no PCH regressions. When building the compiler, the build process may use various in-tree libraries; these need to be built with -fPIE so that it's possible to use them when building a PIE. For instance, when --with-included-gettext is in effect, intl object files must be compiled with -fPIE. Similarly, when building in-tree gmp, isl, mpfr and mpc, they must be compiled with -fPIE. I plan to add an option to link with -Wl,-z,now. ChangeLog: * Makefile.def: Pass $(PICFLAG) to AM_CFLAGS for gmp, mpfr, mpc, and isl. * Makefile.in: Regenerate. * Makefile.tpl: Set PICFLAG. * configure.ac (--enable-host-pie): New check. Set PICFLAG after this check. * configure: Regenerate. c++tools/ChangeLog: * Makefile.in: Rename PIEFLAG to PICFLAG. Set LD_PICFLAG. Use it. Use pic/libiberty.a if PICFLAG is set. * configure.ac (--enable-default-pie): Set PICFLAG instead of PIEFLAG. (--enable-host-pie): New check. * configure: Regenerate. fixincludes/ChangeLog: * Makefile.in: Set and use PICFLAG and LD_PICFLAG. Use the "pic" build of libiberty if PICFLAG is set. * configure.ac: * configure: Regenerate. gcc/ChangeLog: * Makefile.in: Set LD_PICFLAG. Use it. Set enable_host_pie. Remove NO_PIE_CFLAGS and NO_PIE_FLAG. Pass LD_PICFLAG to ALL_LINKERFLAGS. Use the "pic" build of libiberty if --enable-host-pie. * configure.ac (--enable-host-shared): Don't set PICFLAG here. (--enable-host-pie): New check. Set PICFLAG and LD_PICFLAG after this check. * configure: Regenerate. * doc/install.texi: Document --enable-host-pie. gcc/d/ChangeLog: * Make-lang.in: Remove NO_PIE_CFLAGS. intl/ChangeLog: * Makefile.in: Use @PICFLAG@ in COMPILE as well. * configure.ac (--enable-host-shared): Don't set PICFLAG here. (--enable-host-pie): New check. Set PICFLAG after this check. * configure: Regenerate. libcody/ChangeLog: * Makefile.in: Pass LD_PICFLAG to LDFLAGS. * configure.ac (--enable-host-shared): Don't set PICFLAG here. (--enable-host-pie): New check. Set PICFLAG and LD_PICFLAG after this check. * configure: Regenerate. libcpp/ChangeLog: * configure.ac (--enable-host-shared): Don't set PICFLAG here. (--enable-host-pie): New check. Set PICFLAG after this check. * configure: Regenerate. libdecnumber/ChangeLog: * configure.ac (--enable-host-shared): Don't set PICFLAG here. (--enable-host-pie): New check. Set PICFLAG after this check. * configure: Regenerate. libiberty/ChangeLog: * configure.ac: Also set shared when enable_host_pie. * configure: Regenerate. zlib/ChangeLog: * configure.ac (--enable-host-shared): Don't set PICFLAG here. (--enable-host-pie): New check. Set PICFLAG after this check. * configure: Regenerate.
2022-11-14Revert "sphinx: add --with-sphinx-build"Martin Liska1-52/+0
This reverts commit 1f5a932e89b0c2c4a7af7f849ca2e2e3dbf329e0.
2022-11-14Revert "configure: always set SPHINX_BUILD"Martin Liska1-1/+1
This reverts commit 5e749ee3019d7917184af30dab8d09c933c0a4a1.
2022-11-13configure: always set SPHINX_BUILDMartin Liska1-1/+1
During the Sphinx-migration development, I used SPHINX_BUILD='' in order to skip building info and manual pages in gcc folder. However, we've got HAS_SPHINX_BUILD which is the correct flag for that. With the patch, one will get a nicer error message when sphinx-build is missing and one builds (explicitly) a target which depends on it. PR other/107620 gcc/ChangeLog: * configure: Regenerate. * configure.ac: Always set sphinx-build. libgomp/ChangeLog: * configure: Regenerate. * configure.ac: Always set sphinx-build. libiberty/ChangeLog: * configure: Regenerate. * configure.ac: Always set sphinx-build. libitm/ChangeLog: * configure: Regenerate. * configure.ac: Always set sphinx-build. libquadmath/ChangeLog: * configure: Regenerate. * configure.ac: Always set sphinx-build.
2022-11-09sphinx: add --with-sphinx-buildMartin Liska1-0/+52
gcc/ChangeLog: * Makefile.in: Support --with-sphinx-build. * configure.ac: * configure: Regenerate. gcc/ada/ChangeLog: * gcc-interface/Make-lang.in: Support --with-sphinx-build. gcc/d/ChangeLog: * Make-lang.in: Support --with-sphinx-build. gcc/fortran/ChangeLog: * Make-lang.in: Support --with-sphinx-build. gcc/go/ChangeLog: * Make-lang.in: Support --with-sphinx-build. gcc/jit/ChangeLog: * Make-lang.in: Support --with-sphinx-build. libgomp/ChangeLog: * Makefile.in: Support --with-sphinx-build. * configure.ac: Likewise.. * configure: Regenerate. libiberty/ChangeLog: * Makefile.in: Support --with-sphinx-build. * configure.ac: Likewise. * configure: Regenerate. libitm/ChangeLog: * Makefile.in: Support --with-sphinx-build. * configure.ac: Likewise. * configure: Regenerate. libquadmath/ChangeLog: * Makefile.in: Support --with-sphinx-build. * configure.ac: Likewise. * configure: Regenerate.
2022-10-18libiberty: Fix C89-isms in configure testsFlorian Weimer1-3/+11
libiberty/ * acinclude.m4 (ac_cv_func_strncmp_works): Add missing int return type and parameter list to the definition of main. Include <stdlib.h> and <string.h> for prototypes. (ac_cv_c_stack_direction): Add missing int return type and parameter list to the definitions of main, find_stack_direction. Include <stdlib.h> for exit prototype. * configure: Regenerate.
2022-08-25regenerate configure files and config.h.in filesMartin Liska1-0/+3
fixincludes/ChangeLog: * config.h.in: Regenerate. * configure: Regenerate. libada/ChangeLog: * configure: Regenerate. libiberty/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. liboffloadmic/ChangeLog: * configure: Regenerate. * plugin/configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2022-06-26Make it easier to rebuild configure files.Simon Marchi1-0/+1
Add AC_CONFIG_MACRO_DIRS([../config]) So that just running: $ autoreconf -vf ... does the right thing (no need to specify -I ../config). Note: I don't have access to the gcc repo, so if this patch is approved, can somebody push it there on my behalf? I can push it to binutils-gdb. libiberty/ChangeLog: * configure.ac: Add AC_CONFIG_MACRO_DIRS call. * configure: Re-generate.
2021-12-15Revert "Sync with binutils: GCC: Pass --plugin to AR and RANLIB"H.J. Lu1-37/+0
This reverts commit bf8cdd35117dea2049abbeebcdf14de11b323ef7.
2021-12-15Sync with binutils: GCC: Pass --plugin to AR and RANLIBH.J. Lu1-0/+37
Sync with binutils for building binutils with LTO: 50ad1254d50 GCC: Pass --plugin to AR and RANLIB Detect GCC LTO plugin. Pass --plugin to AR and RANLIB to support LTO build. ChangeLog: * Makefile.tpl (AR): Add @AR_PLUGIN_OPTION@ (RANLIB): Add @RANLIB_PLUGIN_OPTION@. * configure.ac: Include config/gcc-plugin.m4. AC_SUBST AR_PLUGIN_OPTION and RANLIB_PLUGIN_OPTION. * libtool.m4 (_LT_CMD_OLD_ARCHIVE): Pass --plugin to AR and RANLIB if possible. * Makefile.in: Regenerated. * configure: Likewise. config/ * gcc-plugin.m4 (GCC_PLUGIN_OPTION): New. libiberty/ * Makefile.in (AR): Add @AR_PLUGIN_OPTION@ (RANLIB): Add @RANLIB_PLUGIN_OPTION@. (configure_deps): Depend on ../config/gcc-plugin.m4. * configure.ac: AC_SUBST AR_PLUGIN_OPTION and RANLIB_PLUGIN_OPTION. * aclocal.m4: Regenerated. * configure: Likewise. zlib/ * configure: Regenerated.
2021-11-29Make etags path used by build system configurableEric Gallager1-0/+6
This commit allows users to specify a path to their "etags" executable for use when doing "make tags". I based this patch off of this one from upstream automake: https://git.savannah.gnu.org/cgit/automake.git/commit/m4?id=d2ccbd7eb38d6a4277d6f42b994eb5a29b1edf29 This means that I just supplied variables that the user can override for the tags programs, rather than having the configure scripts actually check for them. I handle etags and ctags separately because the intl subdirectory has separate targets for them. This commit only affects the subdirectories that use handwritten Makefiles; the ones that use automake will have to wait until we update the version of automake used to be 1.16.4 or newer before they'll be fixed. Addresses #103021 gcc/ChangeLog: PR other/103021 * Makefile.in: Substitute CTAGS, ETAGS, and CSCOPE variables. Use ETAGS variable in TAGS target. * configure: Regenerate. * configure.ac: Allow CTAGS, ETAGS, and CSCOPE variables to be overridden. gcc/ada/ChangeLog: PR other/103021 * gcc-interface/Make-lang.in: Use ETAGS variable in TAGS target. gcc/c/ChangeLog: PR other/103021 * Make-lang.in: Use ETAGS variable in TAGS target. gcc/cp/ChangeLog: PR other/103021 * Make-lang.in: Use ETAGS variable in TAGS target. gcc/d/ChangeLog: PR other/103021 * Make-lang.in: Use ETAGS variable in TAGS target. gcc/fortran/ChangeLog: PR other/103021 * Make-lang.in: Use ETAGS variable in TAGS target. gcc/go/ChangeLog: PR other/103021 * Make-lang.in: Use ETAGS variable in TAGS target. gcc/objc/ChangeLog: PR other/103021 * Make-lang.in: Use ETAGS variable in TAGS target. gcc/objcp/ChangeLog: PR other/103021 * Make-lang.in: Use ETAGS variable in TAGS target. intl/ChangeLog: PR other/103021 * Makefile.in: Use ETAGS variable in TAGS target, CTAGS variable in CTAGS target, and MKID variable in ID target. * configure: Regenerate. * configure.ac: Allow CTAGS, ETAGS, and MKID variables to be overridden. libcpp/ChangeLog: PR other/103021 * Makefile.in: Use ETAGS variable in TAGS target. * configure: Regenerate. * configure.ac: Allow ETAGS variable to be overridden. libiberty/ChangeLog: PR other/103021 * Makefile.in: Use ETAGS variable in TAGS target. * configure: Regenerate. * configure.ac: Allow ETAGS variable to be overridden.
2021-09-01libiberty, configure, Darwin: Avoid detecting deprecated sbrk.Iain Sandoe1-23/+20
Darwin provides an implementation of sbrk, which is detected by the configuration process. However, it is deprecated which leads to build warnings. The malloc-based implementation is more suitable. This patch removes sbrk from the functions searched for Darwin. Signed-off-by: Iain Sandoe <iain@sandoe.co.uk> libiberty/ChangeLog: * configure: Regenerate. * configure.ac: Do not search for sbrk on Darwin. * xmalloc.c: Do not declare sbrk unless it has been found by configure.
2021-06-05Use libiberty snprintf and vsnprintf on hppa*-*-hpux*.John David Anglin1-6/+36
libiberty/ChangeLog: PR target/100734 * configure.ac: Use libiberty snprintf and vsnprintf on hppa*-*-hpux*. * configure: Regenerate.
2021-05-04Fix libiberty link failures in LTO mode for MinGWEric Botcazou1-2/+2
The test for the presence of variables (really symbols) does not work when you add -Ox -flto to CFLAGS: for v in $vars; do AC_MSG_CHECKING([for $v]) AC_CACHE_VAL(libiberty_cv_var_$v, [AC_LINK_IFELSE([AC_LANG_PROGRAM([[int *p;]],[[extern int $v []; p = $v;]])], [eval "libiberty_cv_var_$v=yes"], [eval "libiberty_cv_var_$v=no"])]) if eval "test \"`echo '$libiberty_cv_var_'$v`\" = yes"; then AC_MSG_RESULT(yes) AC_DEFINE_UNQUOTED($n) else AC_MSG_RESULT(no) fi done because the assignment to 'p' is optimized away by LTO. This is visible on MinGW platforms in the form of a link failure for sys_siglist. There is another link failures for stpcpy: the symbol is both referenced by libiberty's pex-win32.c and provided by libiberty's stpcpy.c, so it needs to have a linkage to be resolved in LTO mode. libiberty/ * configure.ac: Make test for variables more robust. * configure: Regenerate. gcc/ * builtins.c (builtin_with_linkage_p): Return true for stp[n]cpy. * symtab.c (symtab_node::output_to_lto_symbol_table_p): Tidy up.
2021-05-03GCC_CET_HOST_FLAGS: Check if host supports multi-byte NOPsH.J. Lu1-0/+29
Sync with binutils for PR binutils/27397. Check if host supports multi-byte NOPs before enabling CET on host. config/ PR bootstrap/99703 * cet.m4 (GCC_CET_HOST_FLAGS): Check if host supports multi-byte NOPs. libiberty/ PR bootstrap/99703 * configure: Regenerated.
2021-02-20libiberty: autogenerate aclocal.m4Mike Frysinger1-3/+0
Move custom macros to acinclude.m4 so we can autogenerate aclocal.m4 with aclocal. This matches every other project in the tree. libiberty/ChangeLog: * Makefile.in (ACLOCAL, ACLOCAL_AMFLAGS, $(srcdir)/aclocal.m4): Define. (configure_deps): Rename to ... (aclocal_deps): ... this. Replace aclocal.m4 with acinclude.m4. ($(srcdir)/configure): Replace $(configure_deps) with $(srcdir)/aclocal.m4. * aclocal.m4: Move libiberty macros to acinclude.m4, then regenerate. * acinclude.m4: New file. * configure: Regenerate.
2020-11-25libsanitizer: Add option to bootstrap using HWASANMatthew Malcomson1-0/+1
This is an analogous option to --bootstrap-asan to configure. It allows bootstrapping GCC using HWASAN. For the same reasons as for ASAN we have to avoid using the HWASAN sanitizer when compiling libiberty and the lto-plugin. Also add a function to query whether -fsanitize=hwaddress has been passed. ChangeLog: * configure: Regenerate. * configure.ac: Add --bootstrap-hwasan option. config/ChangeLog: * bootstrap-hwasan.mk: New file. gcc/ChangeLog: * doc/install.texi: Document new option. libiberty/ChangeLog: * configure: Regenerate. * configure.ac: Avoid using sanitizer. lto-plugin/ChangeLog: * Makefile.am: Avoid using sanitizer. * Makefile.in: Regenerate.
2020-07-30Require CET support only for the final GCC buildH.J. Lu1-4/+17
With --enable-cet, require CET support only for the final GCC build. Don't enable CET without CET support for non-bootstrap build, in stage1 nor for build support. config/ PR bootstrap/96202 * cet.m4 (GCC_CET_HOST_FLAGS): Don't enable CET without CET support in stage1 nor for build support. gcc/ PR bootstrap/96202 * configure: Regenerated. libbacktrace/ PR bootstrap/96202 * configure: Regenerated. libcc1/ PR bootstrap/96202 * configure: Regenerated. libcpp/ PR bootstrap/96202 * configure: Regenerated. libdecnumber/ PR bootstrap/96202 * configure: Regenerated. libiberty/ PR bootstrap/96202 * configure: Regenerated. lto-plugin/ PR bootstrap/96202 * configure: Regenerated.
2020-05-29Avoid nested save_CFLAGS and save_LDFLAGSH.J. Lu1-6/+6
Avoid nested save_CFLAGS and save_LDFLAGS by replacing save_CFLAGS and save_LDFLAGS with cet_save_CFLAGS and cet_save_LDFLAGS in cet.m4. config/ PR bootstrap/95413 * cet.m4: Replace save_CFLAGS and save_LDFLAGS with cet_save_CFLAGS and cet_save_LDFLAGS. gcc/ PR bootstrap/95413 * configure: Regenerated. libatomic/ PR bootstrap/95413 * configure: Regenerated. libbacktrace/ PR bootstrap/95413 * configure: Regenerated. libcc1/ PR bootstrap/95413 * configure: Regenerated. libcpp/ PR bootstrap/95413 * configure: Regenerated. libdecnumber/ PR bootstrap/95413 * configure: Regenerated. libgcc/ PR bootstrap/95413 * configure: Regenerated. libgfortran/ PR bootstrap/95413 * configure: Regenerated. libgomp/ PR bootstrap/95413 * configure: Regenerated. libiberty/ PR bootstrap/95413 * configure: Regenerated. libitm/ PR bootstrap/95413 * configure: Regenerated. libobjc/ PR bootstrap/95413 * configure: Regenerated. libphobos/ PR bootstrap/95413 * configure: Regenerated. libquadmath/ PR bootstrap/95413 * configure: Regenerated. libsanitizer/ PR bootstrap/95413 * configure: Regenerated. libssp/ PR bootstrap/95413 * configure: Regenerated. libstdc++-v3/ PR bootstrap/95413 * configure: Regenerated. libvtv/ PR bootstrap/95413 * configure: Regenerated. lto-plugin/ PR bootstrap/95413 * configure: Regenerated. zlib/ PR bootstrap/95413 * configure: Regenerated.
2020-05-12Enable CET in cross compiler if possibleH.J. Lu1-3/+9
Don't perform CET run-time check for host when cross compiling. Instead, enable CET in cross compiler if possible so that it will run on both CET and non-CET hosts. config/ PR bootstrap/94998 * cet.m4 (GCC_CET_HOST_FLAGS): Enable CET in cross compiler if possible. libiberty/ PR bootstrap/94998 * configure: Regenerated. lto-plugin/ PR bootstrap/94998 * configure: Regenerated.
2020-04-28Check whether -fcf-protection=none -Wl,-z,ibt,-z,shstk work firstH.J. Lu1-49/+77
GCC_CET_HOST_FLAGS uses -Wl,-z,ibt,-z,shstk to check if Linux/x86 host has Intel CET enabled by introducing an Intel CET violation on purpose. To avoid false positive, check whether -Wl,-z,ibt,-z,shstk works first. -fcf-protection=none is added to avoid false negative when -fcf-protection is enabled by default. config/ PR bootstrap/94739 * cet.m4 (GCC_CET_HOST_FLAGS): Add -fcf-protection=none to -Wl,-z,ibt,-z,shstk. Check whether -fcf-protection=none -Wl,-z,ibt,-z,shstk works first. libiberty/ PR bootstrap/94739 * configure: Regenerated. lto-plugin/ PR bootstrap/94739 * configure: Regenerated.
2020-04-25Enable Intel CET in liblto_plugin.so on Intel CET enabled hostH.J. Lu1-0/+145
Since ld is Intel CET enabled on Intel CET enabled host, dlopen fails on liblto_plugin.so if it isn't Intel CET enabled. Add GCC_CET_HOST_FLAGS to cet.m4, use it in libiberty and lto-plugin to always enable Intel CET in liblto_plugin.so on Intel CET enabled host. On Linux/x86 host, enable Intel CET by default if assembler and compiler support Intel CET so that the generated liblto_plugin.so can be used on both CET and non-CET machines. It is an error to disable Intel CET in liblto_plugin.so on Intel CET enabled host. config/ PR bootstrap/94739 * cet.m4 (GCC_CET_HOST_FLAGS): New. libiberty/ PR bootstrap/94739 * Makefile.in (COMPILE.c): Add @CET_HOST_FLAGS@. (configure_deps): Add $(srcdir)/../config/cet.m4 and $(srcdir)/../config/enable.m4. * aclocal.m4: Include ../config/cet.m4 and ../config/enable.m4. * configure.ac: Add GCC_CET_HOST_FLAGS(CET_HOST_FLAGS) and AC_SUBST(CET_HOST_FLAGS). * configure: Regenerated. lto-plugin/ PR bootstrap/94739 * Makefile.am (AM_CFLAGS): Add $(CET_HOST_FLAGS). * configure.ac: Add GCC_CET_HOST_FLAGS(CET_HOST_FLAGS) and AC_SUBST(CET_HOST_FLAGS). * Makefile.in: Regenerated. * aclocal.m4: Likewise. * configure: Likewise.
2020-02-12Use a non-empty test program to test ability to link.Sandra Loosemore1-2/+2
On bare-metal targets, I/O support is typically provided by a BSP and requires a linker script and/or hosting library to be specified on the linker command line. Linking an empty program with the default linker script may succeed, however, which confuses libstdc++ configuration when programs that probe for the presence of various I/O features fail with link errors. 2020-02-12 Sandra Loosemore <sandra@codesourcery.com> PR libstdc++/79193 PR libstdc++/88999 config/ * no-executables.m4: Use a non-empty program to test for linker support. libgcc/ * configure: Regenerated. libgfortran/ * configure: Regenerated. libiberty/ * configure: Regenerated. libitm/ * configure: Regenerated. libobjc/ * configure: Regenerated. libquadmath/ * configure: Regenerated. libssp/ * configure: Regenerated. libstdc++v-3/ * configure: Regenerated.
2018-10-31Update GCC to autoconf 2.69, automake 1.15.1 (PR bootstrap/82856).Joseph Myers1-510/+612
This patch updates GCC to use autoconf 2.69 and automake 1.15.1. (That's not the latest automake version, but it's the one used by binutils-gdb, with which consistency is desirable, and in any case seems a useful incremental update that should make a future update to 1.16.1 easier.) The changes are generally similar to the binutils-gdb ones, and are copied from there where shared files and directories are involved (there are some further changes to such shared directories, however, which I'd expect to apply to binutils-gdb once this patch is in GCC). Largely, obsolete AC_PREREQ calls are removed, while many AC_LANG_SOURCE calls are added to avoid warnings from aclocal and autoconf. Multilib support is no longer included in core automake, meaning that multilib.am needs copying from automake's contrib directory into the GCC source tree. Autoconf 2.69 has Go support, so local copies of that support are removed. I hope the D support will soon be submitted to upstream autoconf so the local copy of that can be removed in a future update. Changes to how automake generates runtest calls mean quotes are removed from RUNTEST definitions in five lib*/testsuite/Makefile.am files (libatomic, libgomp, libitm, libphobos, libvtv; some others have RUNTEST definitions without quotes, which are still OK); libgo and libphobos also get -Wno-override added to AM_INIT_AUTOMAKE so those overrides of RUNTEST do not generate automake warnings. Note that the regeneration did not include regeneration of fixincludes/config.h.in (attempting such regeneration resulted in all the USED_FOR_TARGET conditionals disappearing; and I don't see anything in the fixincludes/ directory that would result in such conditionals being generated, unlike in the gcc/ directory). Also note that libvtv/testsuite/other-tests/Makefile.in was not regenerated; that directory is not listed as a subdirectory for which Makefile.in gets regenerated by calling "automake" in libvtv/, so I'm not sure how it's meant to be regenerated. While I mostly fixed warnings should running aclocal / automake / autoconf, there were various such warnings from automake in the libgfortran, libgo, libgomp, liboffloadmic, libsanitizer, libphobos directories that I did not fix, preferring to leave those to the relevant subsystem maintainers. Specifically, most of those warnings were of the following form (example from libgfortran): Makefile.am:48: warning: source file 'caf/single.c' is in a subdirectory, Makefile.am:48: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. I think it's best for the relevant maintainers to add subdir-objects and do any other associated Makefile.am changes needed. In some cases the paths in the warnings involved ../; I don't know if that adds any extra complications to the use of subdir-objects. I've tested this with native, cross and Canadian cross builds. The risk of any OS-specific issues should I hope be rather lower than if a libtool upgrade were included (we *should* do such an upgrade at some point, but it's more complicated - it involves identifying all our local libtool changes to see if any aren't included in the upstream version we update to, and reverting an upstream libtool patch that's inappropriate for use in GCC); I think it would be better to get this update into GCC so that people can test in different configurations and we can fix any issues found, rather than to try to get more and more testing done before it goes in. top level: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * multilib.am: New file. From automake. Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * libtool.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE. * ar-lib: New file. * test-driver: New file. * configure: Re-generate. config: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * math.m4, tls.m4: Use AC_LANG_SOURCE. Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69. fixincludes: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * aclocal.m4, configure: Regenerate. gcc: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use single line for second argument of AC_DEFINE_UNQUOTED. * doc/install.texi (Tools/packages necessary for modifying GCC): Update to autoconf 2.69 and automake 1.15.1. * aclocal.m4, config.in, configure: Regenerate. gnattools: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * configure: Regenerate. gotools: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * config/go.m4: Remove file. * Makefile.am (ACLOCAL_AMFLAGS): Do not use -I ./config. * configure.ac: Remove AC_PREREQ. Do not include config/go.m4. * Makefile.in, aclocal.m4, configure: Regenerate. intl: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ. * configure: Re-generate. * config.h.in: Re-generate. * aclocal.m4: Re-generate. libada: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * configure: Regenerate. libatomic: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * acinclude.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ. * testsuite/Makefile.am (RUNTEST): Remove quotes. * Makefile.in, aclocal.m4, configure, testsuite/Makefile.in: Regenerate. libbacktrace: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. * Makefile.in, aclocal.m4, config.h.in, configure: Regenerate. libcc1: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, configure: Regenerate. libcpp: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. * aclocal.m4, config.in, configure: Regenerate. libdecnumber: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * aclocal.m4. libffi: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. (AUTOMAKE_OPTIONS): Add info-in-builddir. (CLEANFILES): Remove doc/libffi.info. * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, configure, fficonfig.h.in, include/Makefile.in, man/Makefile.in, testsuite/Makefile.in: Regenerate. libgcc: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. * configure: Regenerate. libgfortran: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, config.h.in, configure: Regenerate. libgo [logically part of this change but omitted from the commit]: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * config/go.m4: Remove file. * config/libtool.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use -Wno-override in AM_INIT_AUTOMAKE call. * Makefile.in, aclocal.m4, configure, testsuite/Makefile.in: Regenerate. libgomp: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am (AUTOMAKE_OPTIONS): Add info-in-builddir. (CLEANFILES): Remove libgomp.info. * configure.ac: Remove AC_PREREQ. * testsuite/Makefile.am (RUNTEST): Remove quotes. * Makefile.in, aclocal.m4, configure, testsuite/Makefile.in: Regenerate. libhsail-rt: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, configure: Regenerate. libiberty: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * config.in: Re-generate. libitm: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. (AUTOMAKE_OPTIONS): Add info-in-builddir. (CLEANFILES): Remove libitm.info. * configure.ac: Remove AC_PREREQ. * testsuite/Makefile.am (RUNTEST): Remove quotes. * Makefile.in, aclocal.m4, configure, testsuite/Makefile.in: Regenerate. libobjc: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * aclocal.m4, config.h.in, configure: Regenerate. liboffloadmic: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. * plugin/Makefile.am: Include multilib.am. * plugin/configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, configure, plugin/Makefile.in, plugin/aclocal.m4, plugin/configure: Regenerate. libphobos: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. Use -Wno-override in AM_INIT_AUTOMAKE call. * m4/autoconf.m4: Add extra argument to AC_LANG_DEFINE call. * m4/druntime/os.m4: Use AC_LANG_SOURCE. * testsuite/Makefile.am (RUNTEST): Remove quotes. * Makefile.in, aclocal.m4, configure, libdruntime/Makefile.in, src/Makefile.in, testsuite/Makefile.in: Regenerate. libquadmath: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. (AUTOMAKE_OPTIONS): Remove 1.8. Add info-in-builddir. (all-local): Define outside conditional code. (CLEANFILES): Remove libquadmath.info. * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, config.h.in, configure: Regenerate. libsanitizer: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. * Makefile.in, aclocal.m4, asan/Makefile.in, configure, interception/Makefile.in, libbacktrace/Makefile.in, lsan/Makefile.in, sanitizer_common/Makefile.in, tsan/Makefile.in, ubsan/Makefile.in: Regenerate. libssp: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. (AUTOMAKE_OPTIONS): Remove 1.9.5. * configure.ac: Remove AC_PREREQ. Quote argument to AC_RUN_IFELSE. * Makefile.in, aclocal.m4, configure: Regenerate. libstdc++-v3: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, configure, doc/Makefile.in, include/Makefile.in, libsupc++/Makefile.in, po/Makefile.in, python/Makefile.in, src/Makefile.in, src/c++11/Makefile.in, src/c++17/Makefile.in, src/c++98/Makefile.in, src/filesystem/Makefile.in, testsuite/Makefile.in: Regenerate. libvtv: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. * testsuite/Makefile.am (RUNTEST): Remove quotes. * Makefile.in, aclocal.m4, configure, testsuite/Makefile.in: Regenerate. lto-plugin: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. * Makefile.in, aclocal.m4, config.h.in, configure: Regenerate. zlib: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * configure.ac: Modernize AC_INIT call, remove AC_PREREQ. * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. From-SVN: r265695
2018-10-01[libiberty] Use pipe inside pex_runNathan Sidwell1-2/+2
https://gcc.gnu.org/ml/gcc-patches/2018-10/msg00039.html * configure.ac (checkfuncs): Add pipe2. * config.in, configure: Rebuilt. * pex-unix.c (pex_unix_exec_child): Comminicate errors from child to parent with a pipe, when possible. From-SVN: r264769
2017-05-31configure.ac (strnlen): Add to AC_CHECK_DECLS.DJ Delorie1-0/+21
* configure.ac (strnlen): Add to AC_CHECK_DECLS. * configure: Likewise. * config.in: Add HACE_DECL_STRNLEN. From-SVN: r248721
2017-01-04Update configure deps, remove stray \xA0 in picflag.m4, regenerateAlan Modra1-2/+3
Also fix a stray changelog entry. Some of the regen here is due to previous changes not being regenerated properly, in part due to the missing configure dependencies. * configure: Regenerate. config/ * picflag.m4: Remove stray \xA0 in comment. gcc/ * Makefile.in (aclocal_deps): Update and order as per aclocal.m4. * configure: Regenerate. * config.in: Regenerate. libada/ * Makefile.in (configure_deps): Update and order as per configure.ac sinclude. * configure: Regenerate. libgcc/ * Makefile.in (configure_deps): Update. * configure: Regenerate. libiberty/ * Makefile.in (configure_deps): Update. * configure: Regenerate. libitm/ * Makefile.in: Regenerate. * testsuite/Makefile.in: Regenerate. From-SVN: r244049
2016-11-15- Revert last commit, restore the regenerated files aclocal.m4 and configureMatthias Klose1-4/+450
From-SVN: r242438
2016-11-15config-ml.in: Remove references to GCJ.Matthias Klose1-450/+4
<toplevel> 2016-11-15 Matthias Klose <doko@ubuntu.com> * config-ml.in: Remove references to GCJ. * configure.ac: Likewise. * configure: Regenerate. config/ 2016-11-15 Matthias Klose <doko@ubuntu.com> multi.m4: Don't set GCJ. gcc/ 2016-11-15 Matthias Klose <doko@ubuntu.com> * doc/install.texi: Remove references to gcj/libjava. * doc/invoke.texi: Likewise. */ (where necessary) 2016-11-15 Matthias Klose <doko@ubuntu.com> * configure: Regenerate. From-SVN: r242433
2016-11-14libiberty: Add -Wshadow=local to warning flags (if supported).Mark Wielaard1-1/+2
libiberty/ChangeLog: * configure.ac (ac_libiberty_warn_cflags): Add -Wshadow=local. * configure: Regenerated. From-SVN: r242396
2016-04-30config.guess: Remove SH5 support.Oleg Endo1-2/+1
/ * config.guess: Remove SH5 support. * config.sub: Likewise. * configure: Likewise. * configure.ac: Likewise. config/ * picflag.m4: Remove SH5 support. gcc/ * config/sh/t-sh: Remove SH5 support. * config.gcc: Likewise. * configure: Likewise. contrib/ * compare-all-tests: Remove SH5 support. * config-list.mk: Likewise. libada/ * configure: Remove SH5 support. libgcc/ * config.host: Remove SH5 support. * configure: Likewise. libiberty/ * configure: Remove SH5 support. libjava/ * classpath/config.guess: Remove SH5 support. * classpath/config.sub: Likewise. From-SVN: r235676
2015-11-09Configury changes for obstack optimizationAlan Modra1-0/+58
* configure.ac: Check size of size_t. * configure: Regenerate. From-SVN: r229990
2015-11-06Do not use libiberty's getpagesize on AndroidJoel Brobecker1-0/+6
libiberty/ChangeLog: * configure.ac: Set AC_CV_FUNC_GETPAGESIZE to "yes" on Android hosts. * configure: Regenerate. From-SVN: r229893
2015-05-22libiberty.h (asprintf): Don't declare if HAVE_DECL_ASPRINTF is not defined.Yunlian Jiang1-398/+580
include/: * libiberty.h (asprintf): Don't declare if HAVE_DECL_ASPRINTF is not defined. libiberty/: * configure.ac: Add AC_GNU_SOURCE. * Makefile.in (COMPILE.c): Add -D_GNU_SOURCE. * configure, config.in: Rebuild. * floatformat.c (_GNU_SOURCE): Don't define if already defined. From-SVN: r223589
2015-04-10re PR target/65351 (libiberty's pic version contains non-pic code on m32 ↵Jakub Jelinek1-5/+9
darwin; causes bootstrap fail building libcc1.) PR target/65351 config/ * mh-darwin: Only apply -mdynamic-no-pic for m32 Darwin when the compiler in use supports -mno-dynamic-no-pic. * picflag.m4: Only append -mno-dynamic-no-pic for Darwin when -mdynamic-no-pic is present in CFLAGS. libiberty/ * configure: Regenerate. libada/ * configure: Regenerate. libgcc/ * configure: Regenerate. gcc/ * configure: Regenerate. Co-Authored-By: Iain Sandoe <iain@codesourcery.com> From-SVN: r221967
2015-04-07re PR target/65351 (libiberty's pic version contains non-pic code on m32 ↵Jakub Jelinek1-1/+3
darwin; causes bootstrap fail building libcc1.) PR target/65351 config/ * picflag.m4: Append -mno-dynamic-no-pic for Darwin. libiberty/ * configure: Regenerate. libada/ * configure: Regenerate. libgcc/ * configure: Regenerate. gcc/ * configure: Regenerate. Co-Authored-By: Iain Sandoe <iain@codesourcery.com> From-SVN: r221891
2014-11-22re PR other/63694 (Build error compiling asan.c: strtoull undeclared)John David Anglin1-0/+41
PR other/63694 * libiberty/configure.ac: Check for strtol, strtoul, strtoll and strtoull declarations. * libiberty/configure: Regenerated. * gcc/configure.ac: Check for strtol, strtoul, strtoll and strtoull declarations. * gcc/configure: Regenerated. * gcc/config.in: Regenerated. From-SVN: r217972
2014-10-28Add strtoll and strtoull to libiberty.Yury Gribov1-2/+120
2014-10-28 Yury Gribov <y.gribov@samsung.com> include/ * libiberty.h (strtol, strtoul, strtoll, strtoull): New prototypes. libiberty/ * strtoll.c: New file. * strtoull.c: New file. * configure.ac: Add long long checks. Add harness for strtoll and strtoull. Check decls for strtol, strtoul, strtoll, strtoull. * Makefile.in (CFILES, CONFIGURED_OFILES): Add strtoll and strtoull. * config.in: Regenerate. * configure: Regenerate. * functions.texi: Regenerate. * testsuite/Makefile.in (check-strtol): New rule. (test-strtol): Likewise. (mostlyclean): Clean up strtol test. * testsuite/test-strtol.c: New test. From-SVN: r216772
2014-04-17re PR sanitizer/56781 (boostrap-asan failure: fixincl fails to link (missing ↵Jakub Jelinek1-0/+7
-lasan)) PR sanitizer/56781 lto-plugin/ * Makefile.am (CFLAGS, LDFLAGS): Filter out -fsanitize=address. (liblto_plugin_la_LIBADD, liblto_plugin_la_LDFLAGS, liblto_plugin_la_DEPENDENCIES): Prefer ../libiberty/noasan/libiberty.a over ../libiberty/pic/libiberty.a if the former exists. * Makefile.in: Regenerated. libiberty/ * maint-tool: Also emit rule for noasan/ subdirectory. * configure.ac (NOASANFLAG): Set and substitute. * Makefile.in: Regenerated. (NOASANFLAG): Set. (all, $(TARGETLIB), mostlyclean): Handle noasan subdir like pic subdir. (stamp-noasandir): New goal. * configure: Regenerated. From-SVN: r209476
2014-01-06libiberty: fix --enable-install-libiberty flag [PR 56780]Mike Frysinger1-1/+0
Commit 199570 fixed the --disable-install-libiberty behavior, but it also added a bug where the enable path never works because the initial clear of target_header_dir wasn't deleted. So we end up initializing properly at the top only to reset it at the end all the time. From-SVN: r206367
2013-11-15picflag.m4 (m68k-*-*): Use default PIC flag.Andreas Schwab1-3/+0
config/ * picflag.m4 (m68k-*-*): Use default PIC flag. gcc/ * configure: Regenerate. libada/ * configure: Regenerate. libgcc/ * configure: Regenerate. libiberty/ * configure: Regenerate. From-SVN: r204854
2013-10-15Add --enable-host-shared configuration optionDavid Malcolm1-0/+6
/ * configure.ac: Add --enable-host-shared * configure: Regenerate. gcc/ * Makefile.in (PICFLAG): New. (enable_host_shared): New. (INTERNAL_CFLAGS): Use PICFLAG. (LIBIBERTY): Use pic build of libiberty.a if configured with --enable-host-shared. * configure.ac: Add --enable-host-shared, setting up new PICFLAG variable. * configure: Regenerate. * doc/install.texi (--enable-shared): Add note contrasting it with... (--enable-host-shared): New option. libbacktrace/ * configure.ac: Add --enable-host-shared, setting up pre-existing PIC_FLAG variable within Makefile.am et al. * configure: Regenerate. libcpp/ * Makefile.in (PICFLAG): New. (ALL_CFLAGS): Add PICFLAG. (ALL_CXXFLAGS): Likewise. * configure.ac: Add --enable-host-shared, setting up new PICFLAG variable. * configure: Regenerate. libdecnumber/ * Makefile.in (PICFLAG): New. (ALL_CFLAGS): Add PICFLAG. * configure.ac: Add --enable-host-shared, setting up new PICFLAG variable. * configure: Regenerate. libiberty/ * configure.ac: If --enable-host-shared, use -fPIC. * configure: Regenerate. zlib/ * configure.ac: Add --enable-host-shared, setting up new PICFLAG variable. * Makefile.am: Add PICFLAG to libz_a_CFLAGS. * Makefile.in: Regenerate. * configure: Regenerate. From-SVN: r203632
2013-06-01re PR other/56780 (--disable-install-libiberty still installs libiberty.a)Matt Burgess1-25/+31
PR other/56780 * libiberty/configure.ac: Move test for --enable-install-libiberty outside of the 'with_target_subdir' test so that it actually gets run. Add output messages to show the test result. * libiberty/configure: Regenerate. * libiberty/Makefile.in (install_to_libdir): Place the installation of the libiberty library in the same guard as that used for the headers to prevent it being installed unless requested via --enable-install-libiberty. From-SVN: r199570
2013-03-27configure: Regenerated.Kai Tietz1-1/+3
* configure: Regenerated. From-SVN: r197177
2012-09-18strnlen.c: New file.Ian Lance Taylor1-3/+10
* strnlen.c: New file. * configure.ac: Check for strnlen, add it to AC_LIBOBJ if it's not present. * Makefile.in: Rebuild dependencies. (CFILES): Add strnlen.c. (CONFIGURED_OFILES): Add ./strnlen.$(objext). * configure, config.in, functions.texi: Rebuild. * maint-tool: Accept .def files in the include directory. From-SVN: r191432
generated by cgit v1.1 at 2025-03-05 18:14:41 +0000