| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Recent Darwin versions place contraints on the use of run paths
specified in environment variables. This breaks some assumptions
in the GCC build.
This change allows the user to configure a Darwin build to use
'@rpath/libraryname.dylib' in library names and then to add an
embedded runpath to executables (and libraries with dependents).
The embedded runpath is added by default unless the user adds
'-nodefaultrpaths' to the link line.
For an installed compiler, it means that any executable built with
that compiler will reference the runtimes installed with the
compiler (equivalent to hard-coding the library path into the name
of the library).
During build-time configurations any "-B" entries will be added to
the runpath thus the newly-built libraries will be found by exes.
Since the install name is set in libtool, that decision needs to be
available here (but might also cause dependent ones in Makefiles,
so we need to export a conditional).
This facility is not available for Darwin 8 or earlier, however the
existing environment variable runpath does work there.
We default this on for systems where the external DYLD_LIBRARY_PATH
does not work and off for Darwin 8 or earlier. For systems that can
use either method, if the value is unset, we use the default (which
is currently DYLD_LIBRARY_PATH).
ChangeLog:
* configure: Regenerate.
* configure.ac: Do not add default runpaths to GCC exes
when we are building -static-libstdc++/-static-libgcc (the
default).
* libtool.m4: Add 'enable-darwin-at-runpath'. Act on the
enable flag to alter Darwin libraries to use @rpath names.
gcc/ChangeLog:
* aclocal.m4: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
* config/darwin.h: Handle Darwin rpaths.
* config/darwin.opt: Handle Darwin rpaths.
* Makefile.in: Handle Darwin rpaths.
gcc/ada/ChangeLog:
* gcc-interface/Makefile.in: Handle Darwin rpaths.
gcc/jit/ChangeLog:
* Make-lang.in: Handle Darwin rpaths.
libatomic/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libbacktrace/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libcc1/ChangeLog:
* configure: Regenerate.
libffi/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
libgcc/ChangeLog:
* config/t-slibgcc-darwin: Generate libgcc_s
with an @rpath name.
* config.host: Handle Darwin rpaths.
libgfortran/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths
libgm2/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
* libm2cor/Makefile.am: Handle Darwin rpaths.
* libm2cor/Makefile.in: Regenerate.
* libm2iso/Makefile.am: Handle Darwin rpaths.
* libm2iso/Makefile.in: Regenerate.
* libm2log/Makefile.am: Handle Darwin rpaths.
* libm2log/Makefile.in: Regenerate.
* libm2min/Makefile.am: Handle Darwin rpaths.
* libm2min/Makefile.in: Regenerate.
* libm2pim/Makefile.am: Handle Darwin rpaths.
* libm2pim/Makefile.in: Regenerate.
libgomp/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths
libitm/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libobjc/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libphobos/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
* libdruntime/Makefile.am: Handle Darwin rpaths.
* libdruntime/Makefile.in: Regenerate.
* src/Makefile.am: Handle Darwin rpaths.
* src/Makefile.in: Regenerate.
libquadmath/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libsanitizer/ChangeLog:
* asan/Makefile.am: Handle Darwin rpaths.
* asan/Makefile.in: Regenerate.
* configure: Regenerate.
* hwasan/Makefile.am: Handle Darwin rpaths.
* hwasan/Makefile.in: Regenerate.
* lsan/Makefile.am: Handle Darwin rpaths.
* lsan/Makefile.in: Regenerate.
* tsan/Makefile.am: Handle Darwin rpaths.
* tsan/Makefile.in: Regenerate.
* ubsan/Makefile.am: Handle Darwin rpaths.
* ubsan/Makefile.in: Regenerate.
libssp/ChangeLog:
* Makefile.am: Handle Darwin rpaths.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
libstdc++-v3/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
* src/Makefile.am: Handle Darwin rpaths.
* src/Makefile.in: Regenerate.
libvtv/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
lto-plugin/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
zlib/ChangeLog:
* configure: Regenerate.
* configure.ac: Handle Darwin rpaths.
|
|
This reports common symbols like GNU nm, via a type code of 'C'.
ChangeLog:
* libtool.m4 (lt_cv_sys_global_symbol_pipe): Augment symcode for
Solaris 11.
gcc/ChangeLog:
* configure: Regenerate.
libatomic/ChangeLog:
* configure: Regenerate.
libbacktrace/ChangeLog:
* configure: Regenerate.
libcc1/ChangeLog:
* configure: Regenerate.
libffi/ChangeLog:
* configure: Regenerate.
libgfortran/ChangeLog:
* configure: Regenerate.
libgm2/ChangeLog:
* configure: Regenerate.
libgomp/ChangeLog:
* configure: Regenerate.
libitm/ChangeLog:
* configure: Regenerate.
libobjc/ChangeLog:
* configure: Regenerate.
libphobos/ChangeLog:
* configure: Regenerate.
libquadmath/ChangeLog:
* configure: Regenerate.
libsanitizer/ChangeLog:
* configure: Regenerate.
libssp/ChangeLog:
* configure: Regenerate.
libstdc++-v3/ChangeLog:
* configure: Regenerate.
libvtv/ChangeLog:
* configure: Regenerate.
lto-plugin/ChangeLog:
* configure: Regenerate.
zlib/ChangeLog:
* configure: Regenerate.
|
|
These are the os support patches we have been grooming and maintaining
for quite a few years over on git.haiku-os.org. All of these
architectures are working and most have been stable for quite some time.
ChangeLog:
* configure: Regenerate.
* configure.ac: Add Haiku to list of ELF OSes
* libtool.m4: Update sys_lib_dlsearch_path_spec on Haiku.
gcc/ChangeLog:
* configure: Regenerate.
libatomic/ChangeLog:
* configure: Regenerate.
libbacktrace/ChangeLog:
* configure: Regenerate.
libcc1/ChangeLog:
* configure: Regenerate.
libffi/ChangeLog:
* configure: Regenerate.
libgfortran/ChangeLog:
* configure: Regenerate.
libgm2/ChangeLog:
* configure: Regenerate.
libgomp/ChangeLog:
* configure: Regenerate.
libitm/ChangeLog:
* configure: Regenerate.
libobjc/ChangeLog:
* configure: Regenerate.
libphobos/ChangeLog:
* configure: Regenerate.
libquadmath/ChangeLog:
* configure: Regenerate.
libsanitizer/ChangeLog:
* configure: Regenerate.
libssp/ChangeLog:
* configure: Regenerate.
libstdc++-v3/ChangeLog:
* configure: Regenerate.
libvtv/ChangeLog:
* configure: Regenerate.
lto-plugin/ChangeLog:
* configure: Regenerate.
zlib/ChangeLog:
* configure: Regenerate.
|
|
My previous nm patch handled all cases but one -- if the user set NM in
the environment to a path which contained an option, libtool's nm
detection tries to run nm against a copy of nm with the options in it:
e.g. if NM was set to "nm --blargle", and nm was found in /usr/bin, the
test would try to run "/usr/bin/nm --blargle /usr/bin/nm --blargle".
This is unlikely to be desirable: in this case we should run
"/usr/bin/nm --blargle /usr/bin/nm".
Furthermore, as part of this nm has to detect when the passed-in $NM
contains a path, and in that case avoid doing a path search itself.
This too was thrown off if an option contained something that looked
like a path, e.g. NM="nm -B../prev-gcc"; libtool then tries to run
"nm -B../prev-gcc nm" which rarely works well (and indeed it looks
to see whether that nm exists, finds it doesn't, and wrongly concludes
that nm -p or whatever does not work).
Fix all of these by clipping all options (defined as everything
including and after the first " -") before deciding whether nm
contains a path (but not using the clipped value for anything else),
and then removing all options from the path-modified nm before
looking to see whether that nm existed.
NM=my-nm now does a path search and runs e.g.
/usr/bin/my-nm -B /usr/bin/my-nm
NM=/usr/bin/my-nm now avoids a path search and runs e.g.
/usr/bin/my-nm -B /usr/bin/my-nm
NM="my-nm -p../wombat" now does a path search and runs e.g.
/usr/bin/my-nm -p../wombat -B /usr/bin/my-nm
NM="../prev-binutils/new-nm -B../prev-gcc" now avoids a path search:
../prev-binutils/my-nm -B../prev-gcc -B ../prev-binutils/my-nm
This seems to be all combinations, including those used by GCC bootstrap
(which, before this commit, fails to bootstrap when configured
--with-build-config=bootstrap-lto, because the lto plugin is now using
--export-symbols-regex, which requires libtool to find a working nm,
while also using -B../prev-gcc to point at the lto plugin associated
with the GCC just built.)
Regenerate all affected configure scripts.
ChangeLog:
* libtool.m4 (LT_PATH_NM): Handle user-specified NM with
options, including options containing paths.
gcc/ChangeLog:
* configure: Regenerate.
libatomic/ChangeLog:
* configure: Regenerate.
libbacktrace/ChangeLog:
* configure: Regenerate.
libcc1/ChangeLog:
* configure: Regenerate.
libffi/ChangeLog:
* configure: Regenerate.
libgfortran/ChangeLog:
* configure: Regenerate.
libgm2/ChangeLog:
* configure: Regenerate.
libgomp/ChangeLog:
* configure: Regenerate.
libitm/ChangeLog:
* configure: Regenerate.
libobjc/ChangeLog:
* configure: Regenerate.
libphobos/ChangeLog:
* configure: Regenerate.
libquadmath/ChangeLog:
* configure: Regenerate.
libsanitizer/ChangeLog:
* configure: Regenerate.
libssp/ChangeLog:
* configure: Regenerate.
libstdc++-v3/ChangeLog:
* configure: Regenerate.
libvtv/ChangeLog:
* configure: Regenerate.
lto-plugin/ChangeLog:
* configure: Regenerate.
zlib/ChangeLog:
* configure: Regenerate.
|
|
Libtool needs to get BSD-format (or MS-format) output out of the system
nm, so that it can scan generated object files for symbol names for
-export-symbols-regex support. Some nms need specific flags to turn on
BSD-formatted output, so libtool checks for this in its AC_PATH_NM.
Unfortunately the code to do this has a pair of interlocking flaws:
- it runs the test by doing an nm of /dev/null. Some platforms
reasonably refuse to do an nm on a device file, but before now this
has only been worked around by assuming that the error message has a
specific textual form emitted by Tru64 nm, and that getting this
error means this is Tru64 nm and that nm -B would work to produce
BSD-format output, even though the test never actually got anything
but an error message out of nm -B. This is fixable by nm'ing *nm
itself* (since we necessarily have a path to it).
- the test is entirely skipped if NM is set in the environment, on the
grounds that the user has overridden the test: but the user cannot
reasonably be expected to know that libtool wants not only nm but
also flags forcing BSD-format output. Worse yet, one such "user" is
the top-level Cygnus configure script, which neither tests for
nor specifies any BSD-format flags. So platforms needing BSD-format
flags always fail to set them when run in a Cygnus tree, breaking
-export-symbols-regex on such platforms. Libtool also needs to
augment $LD on some platforms, but this is done unconditionally,
augmenting whatever the user specified: the nm check should do the
same.
One wrinkle: if the user has overridden $NM, a path might have been
provided: so we use the user-specified path if there was one, and
otherwise do the path search as usual. (If the nm specified doesn't
work, this might lead to a few extra pointless path searches -- but
the test is going to fail anyway, so that's not a problem.)
(Tested with NM unset, and set to nm, /usr/bin/nm, my-nm where my-nm is a
symlink to /usr/bin/nm on the PATH, and /not-on-the-path/my-nm where
*that* is a symlink to /usr/bin/nm.)
ChangeLog:
* libtool.m4 (LT_PATH_NM): Try BSDization flags with a user-provided
NM, if there is one. Run nm on itself, not on /dev/null, to avoid
errors from nms that refuse to work on non-regular files. Remove
other workarounds for this problem. Strip out blank lines from the
nm output.
fixincludes/ChangeLog:
* configure: Regenerate.
gcc/ChangeLog:
* configure: Regenerate.
libatomic/ChangeLog:
* configure: Regenerate.
libbacktrace/ChangeLog:
* configure: Regenerate.
libcc1/ChangeLog:
* configure: Regenerate.
libffi/ChangeLog:
* configure: Regenerate.
libgfortran/ChangeLog:
* configure: Regenerate.
libgm2/ChangeLog:
* configure: Regenerate.
libgomp/ChangeLog:
* configure: Regenerate.
libitm/ChangeLog:
* configure: Regenerate.
libobjc/ChangeLog:
* configure: Regenerate.
libphobos/ChangeLog:
* configure: Regenerate.
libquadmath/ChangeLog:
* configure: Regenerate.
libsanitizer/ChangeLog:
* configure: Regenerate.
libssp/ChangeLog:
* configure: Regenerate.
libstdc++-v3/ChangeLog:
* configure: Regenerate.
libvtv/ChangeLog:
* configure: Regenerate.
lto-plugin/ChangeLog:
* configure: Regenerate.
zlib/ChangeLog:
* configure: Regenerate.
|
|
AR from older binutils doesn't work with --plugin and rc:
[hjl@gnu-cfl-2 bin]$ touch foo.c
[hjl@gnu-cfl-2 bin]$ ar --plugin /usr/libexec/gcc/x86_64-redhat-linux/10/liblto_plugin.so rc libfoo.a foo.c
[hjl@gnu-cfl-2 bin]$ ./ar --plugin /usr/libexec/gcc/x86_64-redhat-linux/10/liblto_plugin.so rc libfoo.a foo.c
./ar: no operation specified
[hjl@gnu-cfl-2 bin]$ ./ar --version
GNU ar (Linux/GNU Binutils) 2.29.51.0.1.20180112
Copyright (C) 2018 Free Software Foundation, Inc.
This program is free software; you may redistribute it under the terms of
the GNU General Public License version 3 or (at your option) any later version.
This program has absolutely no warranty.
[hjl@gnu-cfl-2 bin]$
Check if AR works with --plugin and rc before passing --plugin to AR and
RANLIB.
ChangeLog:
* configure: Regenerated.
* libtool.m4 (_LT_CMD_OLD_ARCHIVE): Check if AR works with
--plugin and rc before enabling --plugin.
config/ChangeLog:
* gcc-plugin.m4 (GCC_PLUGIN_OPTION): Check if AR works with
--plugin and rc before enabling --plugin.
gcc/ChangeLog:
* configure: Regenerate.
libatomic/ChangeLog:
* configure: Regenerate.
libbacktrace/ChangeLog:
* configure: Regenerate.
libcc1/ChangeLog:
* configure: Regenerate.
libffi/ChangeLog:
* configure: Regenerate.
libgfortran/ChangeLog:
* configure: Regenerate.
libgm2/ChangeLog:
* configure: Regenerate.
libgomp/ChangeLog:
* configure: Regenerate.
libiberty/ChangeLog:
* configure: Regenerate.
libitm/ChangeLog:
* configure: Regenerate.
libobjc/ChangeLog:
* configure: Regenerate.
libphobos/ChangeLog:
* configure: Regenerate.
libquadmath/ChangeLog:
* configure: Regenerate.
libsanitizer/ChangeLog:
* configure: Regenerate.
libssp/ChangeLog:
* configure: Regenerate.
libstdc++-v3/ChangeLog:
* configure: Regenerate.
libvtv/ChangeLog:
* configure: Regenerate.
lto-plugin/ChangeLog:
* configure: Regenerate.
zlib/ChangeLog:
* configure: Regenerate.
|
|
Sync with binutils for building binutils with LTO:
50ad1254d50 GCC: Pass --plugin to AR and RANLIB
Detect GCC LTO plugin. Pass --plugin to AR and RANLIB to support LTO
build.
ChangeLog:
* Makefile.tpl (AR): Add @AR_PLUGIN_OPTION@
(RANLIB): Add @RANLIB_PLUGIN_OPTION@.
* configure.ac: Include config/gcc-plugin.m4.
AC_SUBST AR_PLUGIN_OPTION and RANLIB_PLUGIN_OPTION.
* libtool.m4 (_LT_CMD_OLD_ARCHIVE): Pass --plugin to AR and
RANLIB if possible.
* Makefile.in: Regenerated.
* configure: Likewise.
config/ChangeLog:
* gcc-plugin.m4 (GCC_PLUGIN_OPTION): New.
libiberty/ChangeLog:
* Makefile.in (AR): Add @AR_PLUGIN_OPTION@
(RANLIB): Add @RANLIB_PLUGIN_OPTION@.
(configure_deps): Depend on ../config/gcc-plugin.m4.
* configure.ac: AC_SUBST AR_PLUGIN_OPTION and
RANLIB_PLUGIN_OPTION.
* aclocal.m4: Regenerated.
* configure: Likewise.
zlib/ChangeLog:
* configure: Regenerated.
gcc/ChangeLog:
* configure: Regenerate.
libatomic/ChangeLog:
* configure: Regenerate.
libbacktrace/ChangeLog:
* configure: Regenerate.
libcc1/ChangeLog:
* configure: Regenerate.
libffi/ChangeLog:
* configure: Regenerate.
libgfortran/ChangeLog:
* configure: Regenerate.
libgm2/ChangeLog:
* configure: Regenerate.
libgomp/ChangeLog:
* configure: Regenerate.
libitm/ChangeLog:
* configure: Regenerate.
libobjc/ChangeLog:
* configure: Regenerate.
libphobos/ChangeLog:
* configure: Regenerate.
libquadmath/ChangeLog:
* configure: Regenerate.
libsanitizer/ChangeLog:
* configure: Regenerate.
libssp/ChangeLog:
* configure: Regenerate.
libstdc++-v3/ChangeLog:
* configure: Regenerate.
libvtv/ChangeLog:
* configure: Regenerate.
lto-plugin/ChangeLog:
* configure: Regenerate.
|
|
libgfortran/
PR libfortran/109373
* configure.ac: Remove support for --enable-intermodule
* Makefile.am: Remove onestep path.
* configure: Regenerate.
* Makefile.in: Regenerate.
|
|
Needed after a recent change.
gcc/ChangeLog:
* configure: Regenerate.
libatomic/ChangeLog:
* configure: Regenerate.
libbacktrace/ChangeLog:
* configure: Regenerate.
libcc1/ChangeLog:
* configure: Regenerate.
libffi/ChangeLog:
* configure: Regenerate.
libgfortran/ChangeLog:
* configure: Regenerate.
libgomp/ChangeLog:
* configure: Regenerate.
libitm/ChangeLog:
* configure: Regenerate.
libobjc/ChangeLog:
* configure: Regenerate.
liboffloadmic/ChangeLog:
* configure: Regenerate.
* plugin/configure: Regenerate.
libphobos/ChangeLog:
* configure: Regenerate.
libquadmath/ChangeLog:
* configure: Regenerate.
libsanitizer/ChangeLog:
* configure: Regenerate.
libssp/ChangeLog:
* configure: Regenerate.
libstdc++-v3/ChangeLog:
* configure: Regenerate.
libvtv/ChangeLog:
* configure: Regenerate.
lto-plugin/ChangeLog:
* configure: Regenerate.
zlib/ChangeLog:
* configure: Regenerate.
|
|
This change adds the configury bits to activate the build of
shared libs on VxWorks ports configured with --enable-shared,
for libraries variants where this is generally supported (rtp,
code model !large - currently not compatible with -fPIC).
Set lt_cv_deplibs_check_method in libtool.m4, so the build of
libraries know how to establish dependencies. This is useful in
configurations such as aarch64 where proper support of LSE relies
on accurate dependency information between libstdc++ and libgcc_s
to begin with.
Regenerate configure scripts to reflect libtool.m4 change.
2022-10-09 Olivier Hainque <hainque@adacore.com>
* libtool.m4 (*vxworks*): When enable_shared, set dynamic_linker
and friends for rtp !large. Assume the linker has the required
abilities and set lt_cv_deplibs_check_method.
gcc/
* config.gcc (*vxworks*): Add t-slibgcc fragment
if enable_shared.
libgcc/
* config.host (*vxworks*): When enable_shared, add
libgcc and crtstuff "shared" fragments for rtp except
large code model.
(aarch64*-wrs-vxworks7*): Remove t-slibgcc-libgcc from
the list of fragments.
2022-10-09 Olivier Hainque <hainque@adacore.com>
gcc/
* configure: Regenerate.
libatomic/
* configure: Regenerate.
libbacktrace/
* configure: Regenerate.
libcc1/
* configure: Regenerate.
libffi/
* configure: Regenerate.
libgfortran/
* configure: Regenerate.
libgomp/
* configure: Regenerate.
libitm/
* configure: Regenerate.
libobjc/
* configure: Regenerate.
liboffloadmic/
* configure: Regenerate.
liboffloadmic/
* plugin/configure: Regenerate.
libphobos/
* configure: Regenerate.
libquadmath/
* configure: Regenerate.
libsanitizer/
* configure: Regenerate.
libssp/
* configure: Regenerate.
libstdc++-v3/
* configure: Regenerate.
libvtv/
* configure: Regenerate.
lto-plugin/
* configure: Regenerate.
zlib/
* configure: Regenerate.
|
|
The following patch is a revival of the
https://gcc.gnu.org/legacy-ml/gcc-patches/2014-10/msg00771.html
patch. While trunk configured against recent glibc and with linker
--as-needed support doesn't really need to link against -lquadmath
anymore, there are still other targets where libquadmath is still in
use.
As has been discussed, making -static-libgfortran imply statically
linking both libgfortran and libquadmath is undesirable because of
the significant licensing differences between the 2 libraries.
Compared to the 2014 patch, this one doesn't handle -lquadmath
addition in the driver, which to me looks incorrect, libgfortran
configure determines where in libgfortran.spec -lquadmath should
be present if at all and with what it should be wrapped, but
analyzes gfortran -### -static-libgfortran stderr and based on
that figures out what gcc/configure.ac determined.
2022-08-17 Francois-Xavier Coudert <fxcoudert@gcc.gnu.org>
Jakub Jelinek <jakub@redhat.com>
PR fortran/46539
gcc/
* common.opt (static-libquadmath): New option.
* gcc.cc (driver_handle_option): Always accept -static-libquadmath.
* config/darwin.h (LINK_SPEC): Handle -static-libquadmath.
gcc/fortran/
* lang.opt (static-libquadmath): New option.
* invoke.texi (-static-libquadmath): Document it.
* options.cc (gfc_handle_option): Error out if -static-libquadmath
is passed but we do not support it.
libgfortran/
* acinclude.m4 (LIBQUADSPEC): From $FC -static-libgfortran -###
output determine -Bstatic/-Bdynamic, -bstatic/-bdynamic,
-aarchive_shared/-adefault linker support or Darwin remapping
of -lgfortran to libgfortran.a%s and use that around or instead
of -lquadmath in LIBQUADSPEC.
* configure: Regenerated.
Co-Authored-By: Francois-Xavier Coudert <fxcoudert@gcc.gnu.org>
|
|
My patch apparently left some __float128 uses in libgfortran
that could use _Float128 instead, the following patch changes that.
2022-06-29 Jakub Jelinek <jakub@redhat.com>
* mk-kinds-h.sh: Change __float128 to _Float128 in a comment.
* acinclude.m4 (LIBGFOR_CHECK_MATH_IEEE128): Use _Float128 instead of
__float128.
* libgfortran.h (isnan): Change __float128 to _Float128 in a comment.
(__acoshieee128, __acosieee128, __asinhieee128, __asinieee128,
__atan2ieee128, __atanhieee128, __atanieee128, __copysignieee128,
__coshieee128, __cosieee128, __erfcieee128, __erfieee128,
__expieee128, __fabsieee128, __fmaieee128, __fmodieee128, __jnieee128,
__log10ieee128, __logieee128, __powieee128, __sinhieee128,
__sinieee128, __sqrtieee128, __tanhieee128, __tanieee128,
__ynieee128, __strtoieee128): Use _Float128 instead of __float128.
* configure: Regenerated.
|
|
My recent gfortran + libgfortran patch apparently broke (some?) aarch64
builds. While it is desirable to use just _Float128 rather than __float128,
we only want to use it (and e.g. define HAVE_FLOAT128) on targets where
_Float128 is supported and long double isn't IEEE quad precision.
Which is targets that support __float128 type which we have been testing
for before - _Float128 is supported on those targets and on targets where
long double is IEEE quad precision.
So, the following patch restores check for whether __float128 is supported
into the LIBGFOR_CHECK_FLOAT128 check which determines whether
HAVE_FLOAT128 is defined or whether to use libquadmath, so that e.g. on
aarch64 where long double is IEEE quad we don't do that.
2022-06-29 Jakub Jelinek <jakub@redhat.com>
PR bootstrap/106137
* acinclude.m4 (LIBGFOR_CHECK_FLOAT128): Adjust comment.
Also test for __float128.
(HAVE_FLOAT128): Adjust description.
* config.h.in: Regenerated.
* configure: Regenerated.
|
|
As mentioned by Joseph in PR105101, glibc 2.26 or later has on x86
(both -m32/-m64), powerpc64le, ia64 and mips support for
*f128 math/complex APIs plus strtof128 and strfromf128, and these APIs allow
us to avoid libquadmath for Fortran purposes on these architectures,
replace *q math/complex APIs, strtof128 instead of strtoflt128 and,
while strfromf128 unfortunately isn't a perfect replacement to
quadmath_snprintf, it can be made to work.
The advantage of this is that when configured against such glibcs
(2.26 is now almost 5 years old), we can avoid linking against an extra shared
library and the math support in glibc is maintained better than libquadmath.
We need both a compiler change (so that for glibc 2.26+ it uses *f128 APIs
instead of *q) and library change.
The above mentioned problem with strfromf128 is that the strfrom* functions
are severely restricted versions of snprintf. In libgfortran, we handle
!isfinite differently and just use snprintf/quadmath_snprintf for
%+-#.*{L,Q}{f,e} printing.
strfrom* doesn't allow +, -, # modifiers and it only supports .34 or
similar precision, not .* . The L/Q etc. letters are omitted.
The + is there to force + sign at the start if it is positive.
Workaround in the patch is to add the + at the start manually for
!signbit (val).
The - (left alignment instead of right) I don't understand why we need it,
when minimum field width isn't specified (for strfrom* can't be specified),
no padding is ever added anywhere I believe.
The # is to force adding . - workaround is to search for first . or e or '\0'
character, if it is '\0', just append ., if it is e, insert . before e and
memmove the rest (which is just a few bytes, e, +/- and at most a few digits)
one byte later.
The .* case is handled by creating the format string for strfrom* by
snprintf into a temporary buffer.
As requested, this patch also switches from using __float128 type in
libgfortran to _Float128 which is equivalent on all arches that support
__float128.
The change is done in a backwards compatible change, when GCC is configured
against glibc 2.26 or newer, libgfortran.so.5 itself doesn't link against
-lquadmath nor uses any libquadmath APIs, libgfortran.a doesn't use any
libquadmath APIs either. User programs and libraries when being linked
by gfortran driver are linked against -lgfortran and -lquadmath, but
the latter only in the --as-needed linker mode, which means it needs
to be around during linking and will be linked in if there are any
calls to math/complex functions with real(kind=16) or complex(kind=16)
in compilation units compiled by older versions of gcc, but if either
user code doesn't call those math/complex functions for the largest
supported kind, or the code is recompiled by gcc with this change in,
libquadmath won't be linked in.
2022-06-28 Jakub Jelinek <jakub@redhat.com>
gcc/fortran/
* gfortran.h (gfc_real_info): Add use_iec_60559 bitfield.
* trans-types.h (gfc_real16_use_iec_60559): Declare.
* trans-types.cc (gfc_real16_use_iec_60559): Define.
(gfc_init_kinds): When building powerpc64le-linux libgfortran
on glibc 2.26 to 2.31, set gfc_real16_use_iec_60559 and
use_iec_60559.
(gfc_build_real_type): Set gfc_real16_use_iec_60559 and use_iec_60559
on glibc 2.26 or later.
* trans-intrinsic.cc (gfc_build_intrinsic_lib_fndecls): Adjust
comment. Handle gfc_real16_use_iec_60559.
(gfc_get_intrinsic_lib_fndecl): Handle use_iec_60559.
libgfortran/
* configure.ac: Check for strtof128 and strfromf128.
Check for math and complex *f128 functions. Set
have_iec_60559_libc_support to yes if *f128 support is around, for
--enable-libquadmath-support default to "default" rather than yes if
have_iec_60559_libc_support is yes.
* acinclude.m4 (LIBGFOR_CHECK_FLOAT128): Test
_Float128/_Complex _Float128 rather than __float128 and
_Complex float __attribute__((mode(TC))). If libquadmath support
is defaulted and have_iec_60559_libc_support is yes, define and subst
USE_IEC_60559. Remove unused LIBGFOR_BUILD_QUAD conditional.
* Makefile.am (kinds.h): Pass @USE_IEC_60559@ as an extra
mk-kinds-h.sh argument.
* mk-kinds-h.sh: Accept 4th use_iec_60559 argument. Use
_Float128/_Complex _Float128 types instead of __float128 and
_Complex float __attribute__((mode(TC))), and if use_iec_60559 is yes,
use f128 suffix instead of q and define GFC_REAL_16_USE_IEC_60559.
* kinds-override.h: Use _Float128/_Complex _Float128 types instead of
__float128 and _Complex float __attribute__((mode(TC))), if
USE_IEC_60559 is defined, use f128 suffixes instead of q and
define GFC_REAL_17_USE_IEC_60559.
* libgfortran.h: Don't include quadmath_weak.h if USE_IEC_60559 is
defined.
(GFC_REAL_16_INFINITY, GFC_REAL_16_QUIET_NAN): Define
for GFC_REAL_16_USE_IEC_60559 differently.
* caf/single.c (convert_type): Use _Float128/_Complex _Float128
instead of __float128 and _Complex float __attribute__((mode(TC))).
For HAVE_GFC_REAL_10 when HAVE_GFC_REAL_16 isn't defined use
_Complex long double instead of long double.
* ieee/issignaling_fallback.h (ieee854_float128_shape_type): Use
_Float128 instead of __float128.
(__issignalingf128): Change argument type to _Float128.
(issignaling): Use _Float128 instead of __float128 in _Generic.
* intrinsics/cshift0.c (cshift0): Use _Float128 instead of __float128
in a comment. Fix a comment typo, logn double -> long double.
* intrinsics/erfc_scaled.c (_THRESH, _M_2_SQRTPI, _INF, _ERFC, _EXP):
Use different definitions if GFC_REAL_16_USE_IEC_60559.
(_THRESH, _M_2_SQRTPI): Use GFC_REAL_17_LITERAL macro.
(_ERFC, _EXP): Use different definitions if GFC_REAL_17_USE_IEC_60559.
* intrinsics/spread_generic.c (spread, spread_scalar): Use _Float128
instead of __float128 in a comment. Fix a comment typo,
logn double -> long double.
* intrinsics/trigd.c (ENABLE_SIND, ENABLE_COSD, ENABLE_TAND): Handle
GFC_REAL_16_USE_IEC_60559.
* intrinsics/pack_generic.c (pack): Use _Float128 instead of
__float128 in a comment. Fix a comment typo, logn double ->
long double.
* intrinsics/unpack_generic.c (unpack1, unpack0): Likewise.
* runtime/in_pack_generic.c (internal_pack): Likewise.
* runtime/in_unpack_generic.c (internal_unpack): Likewise.
* io/read.c (convert_real, convert_infnan): Handle
GFC_REAL_16_USE_IEC_60559 and GFC_REAL_17_USE_IEC_60559.
* io/transfer128.c (tmp1, tmp2): Don't define if libquadmath
isn't needed.
* io/write_float.def (gfor_strfromf128): New function.
(DTOA2Q, FDTOA2Q): Define differently if
GFC_REAL_16_USE_IEC_60559 or GFC_REAL_17_USE_IEC_60559.
* m4/mtype.m4: Use different suffix if GFC_REAL_16_USE_IEC_60559
or GFC_REAL_17_USE_IEC_60559.
* config.h.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
* generated/bessel_r16.c: Regenerated.
* generated/bessel_r17.c: Regenerated.
* generated/norm2_r16.c: Regenerated.
* generated/norm2_r17.c: Regenerated.
|
|
This brings the library to compile with all specific functions.
It also corrects the patsubst patterns so the right files
get the flags.
It was necessary to manually add -D__powerpc64__ because apparently
this is not set for Fortran.
libgfortran/ChangeLog:
* Makefile.am: Correct files for compilation flags. Add
-D__powerpc64__ for Fortran sources. Get kinds.inc from
grep of kinds.h and kinds-override.h.
* Makefile.in: Regenerate.
* config.h.in: Regenerate.
* configure: Regenerate.
* configure.ac: Add -mno-gnu-attribute to compile flags.
* generated/_abs_c17.F90: Regenerate.
* generated/_abs_r17.F90: Regenerate.
* generated/_acos_r17.F90: Regenerate.
* generated/_acosh_r17.F90: Regenerate.
* generated/_aimag_c17.F90: Regenerate.
* generated/_aint_r17.F90: Regenerate.
* generated/_anint_r17.F90: Regenerate.
* generated/_asin_r17.F90: Regenerate.
* generated/_asinh_r17.F90: Regenerate.
* generated/_atan2_r17.F90: Regenerate.
* generated/_atan_r17.F90: Regenerate.
* generated/_atanh_r17.F90: Regenerate.
* generated/_conjg_c17.F90: Regenerate.
* generated/_cos_c17.F90: Regenerate.
* generated/_cos_r17.F90: Regenerate.
* generated/_cosh_r17.F90: Regenerate.
* generated/_dim_r17.F90: Regenerate.
* generated/_exp_c17.F90: Regenerate.
* generated/_exp_r17.F90: Regenerate.
* generated/_log10_r17.F90: Regenerate.
* generated/_log_c17.F90: Regenerate.
* generated/_log_r17.F90: Regenerate.
* generated/_mod_r17.F90: Regenerate.
* generated/_sign_r17.F90: Regenerate.
* generated/_sin_c17.F90: Regenerate.
* generated/_sin_r17.F90: Regenerate.
* generated/_sinh_r17.F90: Regenerate.
* generated/_sqrt_c17.F90: Regenerate.
* generated/_sqrt_r17.F90: Regenerate.
* generated/_tan_r17.F90: Regenerate.
* generated/_tanh_r17.F90: Regenerate.
* kinds-override.h: Adjust to trunk.
Change condition to single line so it can be grepped.
* m4/specific.m4: Make sure that real=kind16 is used
for _r17.F90 and _c17.F90 files.
* m4/specific2.m4: Likewise.
|
|
libgfortran/ChangeLog:
* acinclude.m4 (LIBGFOR_CHECK_MATH_IEEE128): New macro.
* configure.ac: Use it.
* config.h.in: Regenerate.
* configure: Regenerate.
|
|
This prepares the library side for REAL(KIND=17). It is
not yet tested, but at least compiles cleanly on POWER 9
and x86_64.
2021-10-19 Thomas Koenig <tkoenig@gcc.gnu.org>
* Makefile.am: Add _r17 and _c17 files. Build them
with -mabi=ieeelongdouble on POWER.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: New flag HAVE_REAL_17.
* kinds-override.h: (HAVE_GFC_REAL_17): New macro.
(HAVE_GFC_COMPLEX_17): New macro.
(GFC_REAL_17_HUGE): New macro.
(GFC_REAL_17_LITERAL_SUFFIX): New macro.
(GFC_REAL_17_LITERAL): New macro.
(GFC_REAL_17_DIGITS): New macro.
(GFC_REAL_17_RADIX): New macro.
* libgfortran.h (POWER_IEEE128): New macro.
(gfc_array_r17): Typedef.
(GFC_DTYPE_REAL_17): New macro.
(GFC_DTYPE_COMPLEX_17): New macro.
(__acoshieee128): Prototype.
(__acosieee128): Prototype.
(__asinhieee128): Prototype.
(__asinieee128): Prototype.
(__atan2ieee128): Prototype.
(__atanhieee128): Prototype.
(__atanieee128): Prototype.
(__coshieee128): Prototype.
(__cosieee128): Prototype.
(__erfieee128): Prototype.
(__expieee128): Prototype.
(__fabsieee128): Prototype.
(__jnieee128): Prototype.
(__log10ieee128): Prototype.
(__logieee128): Prototype.
(__powieee128): Prototype.
(__sinhieee128): Prototype.
(__sinieee128): Prototype.
(__sqrtieee128): Prototype.
(__tanhieee128): Prototype.
(__tanieee128): Prototype.
(__ynieee128): Prototype.
* m4/mtype.m4: Make a bit more readable. Add KIND=17.
* generated/_abs_c17.F90: New file.
* generated/_abs_r17.F90: New file.
* generated/_acos_r17.F90: New file.
* generated/_acosh_r17.F90: New file.
* generated/_aimag_c17.F90: New file.
* generated/_aint_r17.F90: New file.
* generated/_anint_r17.F90: New file.
* generated/_asin_r17.F90: New file.
* generated/_asinh_r17.F90: New file.
* generated/_atan2_r17.F90: New file.
* generated/_atan_r17.F90: New file.
* generated/_atanh_r17.F90: New file.
* generated/_conjg_c17.F90: New file.
* generated/_cos_c17.F90: New file.
* generated/_cos_r17.F90: New file.
* generated/_cosh_r17.F90: New file.
* generated/_dim_r17.F90: New file.
* generated/_exp_c17.F90: New file.
* generated/_exp_r17.F90: New file.
* generated/_log10_r17.F90: New file.
* generated/_log_c17.F90: New file.
* generated/_log_r17.F90: New file.
* generated/_mod_r17.F90: New file.
* generated/_sign_r17.F90: New file.
* generated/_sin_c17.F90: New file.
* generated/_sin_r17.F90: New file.
* generated/_sinh_r17.F90: New file.
* generated/_sqrt_c17.F90: New file.
* generated/_sqrt_r17.F90: New file.
* generated/_tan_r17.F90: New file.
* generated/_tanh_r17.F90: New file.
* generated/bessel_r17.c: New file.
* generated/cshift0_c17.c: New file.
* generated/cshift0_r17.c: New file.
* generated/cshift1_16_c17.c: New file.
* generated/cshift1_16_r17.c: New file.
* generated/cshift1_4_c17.c: New file.
* generated/cshift1_4_r17.c: New file.
* generated/cshift1_8_c17.c: New file.
* generated/cshift1_8_r17.c: New file.
* generated/findloc0_c17.c: New file.
* generated/findloc0_r17.c: New file.
* generated/findloc1_c17.c: New file.
* generated/findloc1_r17.c: New file.
* generated/in_pack_c17.c: New file.
* generated/in_pack_r17.c: New file.
* generated/in_unpack_c17.c: New file.
* generated/in_unpack_r17.c: New file.
* generated/matmul_c17.c: New file.
* generated/matmul_r17.c: New file.
* generated/matmulavx128_c17.c: New file.
* generated/matmulavx128_r17.c: New file.
* generated/maxloc0_16_r17.c: New file.
* generated/maxloc0_4_r17.c: New file.
* generated/maxloc0_8_r17.c: New file.
* generated/maxloc1_16_r17.c: New file.
* generated/maxloc1_4_r17.c: New file.
* generated/maxloc1_8_r17.c: New file.
* generated/maxval_r17.c: New file.
* generated/minloc0_16_r17.c: New file.
* generated/minloc0_4_r17.c: New file.
* generated/minloc0_8_r17.c: New file.
* generated/minloc1_16_r17.c: New file.
* generated/minloc1_4_r17.c: New file.
* generated/minloc1_8_r17.c: New file.
* generated/minval_r17.c: New file.
* generated/norm2_r17.c: New file.
* generated/pack_c17.c: New file.
* generated/pack_r17.c: New file.
* generated/pow_c17_i16.c: New file.
* generated/pow_c17_i4.c: New file.
* generated/pow_c17_i8.c: New file.
* generated/pow_r17_i16.c: New file.
* generated/pow_r17_i4.c: New file.
* generated/pow_r17_i8.c: New file.
* generated/product_c17.c: New file.
* generated/product_r17.c: New file.
* generated/reshape_c17.c: New file.
* generated/reshape_r17.c: New file.
* generated/spread_c17.c: New file.
* generated/spread_r17.c: New file.
* generated/sum_c17.c: New file.
* generated/sum_r17.c: New file.
* generated/unpack_c17.c: New file.
* generated/unpack_r17.c: New file.
|
|
It turned out that enabling the -Wmissing-include-dirs for libcpp did output
too many warnings – at least as run with -B and similar options during the
GCC build and warning for internal include dirs like finclude, unlikely of
relevance to for a real-world user.
This patch now only warns for -I and -J by default but permits to get the
full warnings including libcpp ones with -Wmissing-include-dirs. It
additionally documents this in the manual.
With that change, the -Wno-missing-include-dirs could be removed
from libgfortran's configure and libgomp's testsuite always cflags.
This reverts those bits of the previous
commit r12-3722-g417ea5c02cef7f000e66d1af22b066c2c1cda047
Additionally, it turned out that all call to load_file called exit
explicitly - except for the main file via gfc_init -> gfc_new_file. The
latter also output a file not existing fatal error, such that two errors
where printed. Now exit is called in line with the other users of
load_file.
Finally, when compileing with "nonexisting/file.f90", first a warning that
"nonexisting" does not exist as include path was printed before the file
not found error was printed. Now the directory in which the physical file
is located is added silently, relying on the file-not-found diagnostic for
those.
PR fortran/55534
gcc/ChangeLog:
* doc/invoke.texi (-Wno-missing-include-dirs.): Document Fortran
behavior.
gcc/fortran/ChangeLog:
* cpp.c (gfc_cpp_register_include_paths, gfc_cpp_post_options):
Add new bool verbose_missing_dir_warn argument.
* cpp.h (gfc_cpp_post_options): Update prototype.
* f95-lang.c (gfc_init): Remove duplicated file-not found diag.
* gfortran.h (gfc_check_include_dirs): Takes bool
verbose_missing_dir_warn arg.
(gfc_new_file): Returns now void.
* options.c (gfc_post_options): Update to warn for -I and -J,
only, by default but for all when user requested.
* scanner.c (gfc_do_check_include_dir):
(gfc_do_check_include_dirs, gfc_check_include_dirs): Take bool
verbose warn arg and update to avoid printing the same message
twice or never.
(load_file): Fix indent.
(gfc_new_file): Return void and exit when load_file failed
as all other load_file users do.
libgfortran/ChangeLog:
* configure.ac (AM_FCFLAGS): Revert r12-3722 by removing
-Wno-missing-include-dirs.
* configure: Regenerate.
libgomp/ChangeLog:
* testsuite/libgomp.fortran/fortran.exp (ALWAYS_CFLAGS): Revert
r12-3722 by removing -Wno-missing-include-dirs.
* testsuite/libgomp.oacc-fortran/fortran.exp (ALWAYS_CFLAGS): Likewise.
gcc/testsuite/ChangeLog:
* gfortran.dg/include_14.f90: Add -J testcase and update dg-output.
* gfortran.dg/include_15.f90: Likewise.
* gfortran.dg/include_16.f90: Likewise.
* gfortran.dg/include_17.f90: Likewise.
* gfortran.dg/include_18.f90: Likewise.
* gfortran.dg/include_19.f90: Likewise.
|
|
gcc/fortran/ChangeLog:
PR fortran/55534
* cpp.c: Define GCC_C_COMMON_C for #include "options.h" to make
cpp_reason_option_codes available.
(gfc_cpp_register_include_paths): Make static, set pfile's
warn_missing_include_dirs and move before caller.
(gfc_cpp_init_cb): New, cb code moved from ...
(gfc_cpp_init_0): ... here.
(gfc_cpp_post_options): Call gfc_cpp_init_cb.
(cb_cpp_diagnostic_cpp_option): New. As implemented in c-family
to match CppReason flags to -W... names.
(cb_cpp_diagnostic): Use it to replace single special case.
* cpp.h (gfc_cpp_register_include_paths): Remove as now static.
* gfortran.h (gfc_check_include_dirs): New prototype.
(gfc_add_include_path): Add new bool arg.
* options.c (gfc_init_options): Don't set -Wmissing-include-dirs.
(gfc_post_options): Set it here after commandline processing. Call
gfc_add_include_path with defer_warn=false.
(gfc_handle_option): Call it with defer_warn=true.
* scanner.c (gfc_do_check_include_dir, gfc_do_check_include_dirs,
gfc_check_include_dirs): New. Diagnostic moved from ...
(add_path_to_list): ... here, which came before cmdline processing.
Take additional bool defer_warn argument.
(gfc_add_include_path): Take additional defer_warn arg.
* scanner.h (struct gfc_directorylist): Reorder for alignment issues,
add new 'bool warn'.
libgfortran/ChangeLog:
PR fortran/55534
* configure.ac (AM_FCFLAGS): Add -Wno-missing-include-dirs.
* configure: Regenerate.
libgomp/ChangeLog:
PR fortran/55534
* testsuite/libgomp.fortran/fortran.exp: Add -Wno-missing-include-dirs
to ALWAYS_CFLAGS.
* testsuite/libgomp.oacc-fortran/fortran.exp: Likewise.
gcc/testsuite/ChangeLog:
* gfortran.dg/include_6.f90: Change dg-error to
dg-warning and update pattern.
* gfortran.dg/include_14.f90: New test.
* gfortran.dg/include_15.f90: New test.
* gfortran.dg/include_16.f90: New test.
* gfortran.dg/include_17.f90: New test.
* gfortran.dg/include_18.f90: New test.
* gfortran.dg/include_19.f90: New test.
* gfortran.dg/include_20.f90: New test.
* gfortran.dg/include_21.f90: New test.
|
|
We recently had a report of build failure against a Darwin branch on
the latest OS release. This was because (temporarily) the symlink
from libm.dylib => libSystem.dylib had been removed/omitted.
libm is not needed on Darwin, and should not be added unconditionally
even if that is (mostly) harmless since it is a symlink to libc.
There could be cases where the addition was not completely harmless
because the presentation of the symlink would cause the symbols exposed
in libSystem to be considered ahead of ones presented in convenience
libraries.
libgfortran/ChangeLog:
* Makefile.am: Use configured libm availability.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Use libtool macro to find libm availability.
* libgfortran.spec.in: Use configured libm availability.
|
|
This patch reverts the part of Tobias's patch for PR target/96306 that
disables 128-bit integer support for AMD GCN.
2021-06-18 Julian Brown <julian@codesourcery.com>
libgfortran/
PR target/96306
* configure.ac: Remove stanza that removes KIND=16 integers for AMD GCN.
* configure: Regenerate.
|
|
ChangeLog:
* libtool.m4: Match gnu* along other GNU systems.
* libgo/config/libtool.m4: Match gnu* along other GNU systems.
* libgo/configure: Re-generate.
libffi/
* configure: Re-generate.
libgomp/
* configure: Re-generate.
gcc/
* configure: Re-generate.
libatomic/
* configure: Re-generate.
libbacktrace/
* configure: Re-generate.
libcc1/
* configure: Re-generate.
libgfortran/
* configure: Re-generate.
libgomp/
* configure: Re-generate.
libhsail-rt/
* configure: Re-generate.
libitm/
* configure: Re-generate.
libobjc/
* configure: Re-generate.
liboffloadmic/
* configure: Re-generate.
* plugin/configure: Re-generate.
libphobos/
* configure: Re-generate.
libquadmath/
* configure: Re-generate.
libsanitizer/
* configure: Re-generate.
libssp/
* configure: Re-generate.
libstdc++-v3/
* configure: Re-generate.
libvtv/
* configure: Re-generate.
lto-plugin/
* configure: Re-generate.
zlib/
* configure: Re-generate.
|
|
The change in major version (and the increment from Darwin19 to 20)
caused libtool tests to fail which resulted in incorrect build settings
for shared libraries.
We take this opportunity to sort out the shared undefined symbols state
rather than propagating the current unsound behaviour into a new rev.
This change means that we default to the case that missing symbols are
considered an error, and if one wants to allow this intentionally, the
confiuration for that case should be set appropriately.
Three existing cases need undefined dynamic lookup:
libitm, where there is already a configuration mechanism to add the
flags.
libcc1, where we add simple configuration to add the flags for Darwin.
libsanitizer, where we can add to the existing extra flags.
libcc1/ChangeLog:
PR target/97865
* Makefile.am: Add dynamic_lookup to LD flags for Darwin.
* configure.ac: Test for Darwin host and set a flag.
* Makefile.in: Regenerate.
* configure: Regenerate.
libitm/ChangeLog:
PR target/97865
* configure.tgt: Add dynamic_lookup to XLDFLAGS for Darwin.
* configure: Regenerate.
libsanitizer/ChangeLog:
PR target/97865
* configure.tgt: Add dynamic_lookup to EXTRA_CXXFLAGS for
Darwin.
* configure: Regenerate.
ChangeLog:
PR target/97865
* libtool.m4: Update handling of Darwin platform link flags
for Darwin20.
gcc/ChangeLog:
PR target/97865
* configure: Regenerate.
libatomic/ChangeLog:
PR target/97865
* configure: Regenerate.
libbacktrace/ChangeLog:
PR target/97865
* configure: Regenerate.
libffi/ChangeLog:
PR target/97865
* configure: Regenerate.
libgfortran/ChangeLog:
PR target/97865
* configure: Regenerate.
libgomp/ChangeLog:
PR target/97865
* configure: Regenerate.
libhsail-rt/ChangeLog:
PR target/97865
* configure: Regenerate.
libobjc/ChangeLog:
PR target/97865
* configure: Regenerate.
libphobos/ChangeLog:
PR target/97865
* configure: Regenerate.
libquadmath/ChangeLog:
PR target/97865
* configure: Regenerate.
libssp/ChangeLog:
PR target/97865
* configure: Regenerate.
libstdc++-v3/ChangeLog:
PR target/97865
* configure: Regenerate.
libvtv/ChangeLog:
PR target/97865
* configure: Regenerate.
zlib/ChangeLog:
PR target/97865
* configure: Regenerate.
|
|
This change adds the +nodefaultrpath ld option to remove all library
paths that were specified with the -L option from the embedded path.
2020-11-29 John David Anglin <danglin@gcc.gnu.org>
ChangeLog:
* libtool.m4 (archive_cmds): Add +nodefaultrpath ld option on
hppa64-*-hpux11*.
libatomic/ChangeLog:
* configure: Regenerate.
libbacktrace/ChangeLog:
* configure: Regenerate.
libcc1/ChangeLog:
* configure: Regenerate.
libffi/ChangeLog:
* configure: Regenerate.
libgfortran/ChangeLog:
* configure: Regenerate.
libgomp/ChangeLog:
* configure: Regenerate.
libhsail-rt/ChangeLog:
* configure: Regenerate.
libitm/ChangeLog:
* configure: Regenerate.
libobjc/ChangeLog:
* configure: Regenerate.
liboffloadmic/ChangeLog:
* configure: Regenerate.
* plugin/configure: Regenerate.
libquadmath/ChangeLog:
* configure: Regenerate.
libsanitizer/ChangeLog:
* configure: Regenerate.
libssp/ChangeLog:
* configure: Regenerate.
libstdc++-v3/ChangeLog:
* configure: Regenerate.
libvtv/ChangeLog:
* configure: Regenerate.
lto-plugin/ChangeLog:
* configure: Regenerate.
zlib/ChangeLog:
* configure: Regenerate.
|
|
libgfortran/ChangeLog:
PR target/96306
* configure.ac: Add LIBGOMP_CHECKED_INT_KINDS and
LIBGOMP_CHECKED_REAL_KINDS and use it for to skip
integer kind=16 checks for amdgcn.
* Makefile.am (kinds.h, selected_int_kind.inc,
selected_real_kind.inc): Pass them on.
* mk-kinds-h.sh: Takes to-be-check kinds as argument.
* mk-sik-inc.sh: Likewise.
* mk-srk-inc.sh: Likewise.
* Makefile.in: Regenerate.
* configure: Regenerate.
|
|
This patch adds the ability to configure GCC on AIX to build as a
64 bit application and to build target libraries "FAT" libraries in both
32 bit and 64 bit mode.
The patch adds makefile fragment hooks to target libraries that allows
them to include target-specific rules. The target specific rules for
AIX place both 32 bit and 64 bit objects and shared objects
in archives at the top-level, not multilib subdirectories. The
multilibs are built in subdirectories, but must be combined during the
last parts of the target library build process. Because of the way
that GCC bootstrap works, the libraries must be combined during the
multiple stages of GCC bootstrap, not solely when installed in the
final destination, so the libraries are correct at the end of
each target library build stage, not solely an install recipe.
gcc/ChangeLog
2020-06-21 David Edelsohn <dje.gcc@gmail.com>
* config.gcc: Use t-aix64, biarch64 and default64 for cpu_is_64bit.
* config/rs6000/aix72.h (ASM_SPEC): Remove aix64 option.
(ASM_SPEC32): New.
(ASM_SPEC64): New.
(ASM_CPU_SPEC): Remove vsx and altivec options.
(CPP_SPEC_COMMON): Rename from CPP_SPEC.
(CPP_SPEC32): New.
(CPP_SPEC64): New.
(CPLUSPLUS_CPP_SPEC): Rename to CPLUSPLUS_CPP_SPEC_COMMON..
(TARGET_DEFAULT): Only define if not BIARCH.
(LIB_SPEC_COMMON): Rename from LIB_SPEC.
(LIB_SPEC32): New.
(LIB_SPEC64): New.
(LINK_SPEC_COMMON): Rename from LINK_SPEC.
(LINK_SPEC32): New.
(LINK_SPEC64): New.
(STARTFILE_SPEC): Add 64 bit version of crtcxa and crtdbase.
(ASM_SPEC): Define 32 and 64 bit alternatives using DEFAULT_ARCH64_P.
(CPP_SPEC): Same.
(CPLUSPLUS_CPP_SPEC): Same.
(LIB_SPEC): Same.
(LINK_SPEC): Same.
(SUBTARGET_EXTRA_SPECS): Add new 32/64 specs.
* config/rs6000/defaultaix64.h: New file.
* config/rs6000/t-aix64: New file.
libgcc/ChangeLog
2020-06-21 David Edelsohn <dje.gcc@gmail.com>
* config.host (extra_parts): Add crtcxa_64 and crtdbase_64.
* config/rs6000/t-aix-cxa: Explicitly compile 32 bit with -maix32
and 64 bit with -maix64.
* config/rs6000/t-slibgcc-aix: Remove extra @multilib_dir@ level.
Build and install AIX-style FAT libraries.
libgomp/ChangeLog
2020-06-21 David Edelsohn <dje.gcc@gmail.com>
* Makefile.am (tmake_file): Build and install AIX-style FAT libraries.
* Makefile.in: Regenerate
* configure.ac (tmake_file): Substitute.
* configure: Regenerate.
* configure.tgt (powerpc-ibm-aix*): Define tmake_file.
* config/t-aix: New file.
libstdc++-v3/ChangeLog
2020-06-21 David Edelsohn <dje.gcc@gmail.com>
* Makefile.am (tmake_file): Build and install AIX-style FAT libraries.
* Makefile.in: Regenerate.
* configure.ac (tmake_file): Substitute.
* configure: Regenerate.
* configure.host (aix*): Define tmake_file.
* config/os/aix/t-aix: New file.
libatomic/ChangeLog
2020-06-21 David Edelsohn <dje.gcc@gmail.com>
* Makefile.am (tmake_file): Build and install AIX-style FAT libraries.
* Makefile.in: Regenerate.
* configure.ac (tmake_file): Substitute.
* configure: Regenerate.
* configure.tgt (powerpc-ibm-aix*): Define tmake_file.
* config/t-aix: New file.
libgfortran/ChangeLog
2020-06-21 David Edelsohn <dje.gcc@gmail.com>
* Makefile.am (tmake_file): Build and install AIX-style FAT libraries.
* Makefile.in: Regenerate.
* configure.ac (tmake_file): Substitute.
* configure: Regenerate.
* configure.host: Add system configury stanza. Define tmake_file.
* config/t-aix: New file.
|
|
Avoid nested save_CFLAGS and save_LDFLAGS by replacing save_CFLAGS and
save_LDFLAGS with cet_save_CFLAGS and cet_save_LDFLAGS in cet.m4.
config/
PR bootstrap/95413
* cet.m4: Replace save_CFLAGS and save_LDFLAGS with
cet_save_CFLAGS and cet_save_LDFLAGS.
gcc/
PR bootstrap/95413
* configure: Regenerated.
libatomic/
PR bootstrap/95413
* configure: Regenerated.
libbacktrace/
PR bootstrap/95413
* configure: Regenerated.
libcc1/
PR bootstrap/95413
* configure: Regenerated.
libcpp/
PR bootstrap/95413
* configure: Regenerated.
libdecnumber/
PR bootstrap/95413
* configure: Regenerated.
libgcc/
PR bootstrap/95413
* configure: Regenerated.
libgfortran/
PR bootstrap/95413
* configure: Regenerated.
libgomp/
PR bootstrap/95413
* configure: Regenerated.
libiberty/
PR bootstrap/95413
* configure: Regenerated.
libitm/
PR bootstrap/95413
* configure: Regenerated.
libobjc/
PR bootstrap/95413
* configure: Regenerated.
libphobos/
PR bootstrap/95413
* configure: Regenerated.
libquadmath/
PR bootstrap/95413
* configure: Regenerated.
libsanitizer/
PR bootstrap/95413
* configure: Regenerated.
libssp/
PR bootstrap/95413
* configure: Regenerated.
libstdc++-v3/
PR bootstrap/95413
* configure: Regenerated.
libvtv/
PR bootstrap/95413
* configure: Regenerated.
lto-plugin/
PR bootstrap/95413
* configure: Regenerated.
zlib/
PR bootstrap/95413
* configure: Regenerated.
|
|
When defaulting CET run-time support to auto, check if -fcf-protection
works. Even if the stage1 GCC doesn't support -fcf-protection, since
the final GCC does, CET run-time support will be enabled by default if
binutils support CET.
config/
PR bootstrap/95147
* cet.m4 (GCC_CET_FLAGS): Also check if -fcf-protection works
when defaulting to auto.
libatomic/
PR bootstrap/95147
* configure: Regenerated.
libbacktrace/
PR bootstrap/95147
* configure: Regenerated.
libgcc/
PR bootstrap/95147
* configure: Regenerated.
libgfortran/
PR bootstrap/95147
* configure: Regenerated.
libgomp/
PR bootstrap/95147
* configure: Regenerated.
libitm/
PR bootstrap/95147
* configure: Regenerated.
libobjc/
PR bootstrap/95147
* configure: Regenerated.
libphobos/
PR bootstrap/95147
* configure: Regenerated.
libquadmath/
PR bootstrap/95147
* configure: Regenerated.
libsanitizer/
PR bootstrap/95147
* configure: Regenerated.
libssp/
PR bootstrap/95147
* configure: Regenerated.
libstdc++-v3/
PR bootstrap/95147
* configure: Regenerated.
libvtv/
PR bootstrap/95147
* configure: Regenerated.
zlib/
PR bootstrap/95147
* configure: Regenerated.
|
|
CET has been added since GCC 8. This patch defaults CET run-time support
to auto. It enables CET run-time support if asssembler supports CET
instructions and multi-byte NOPs are enabled via SSE2.
config/
* cet.m4 (GCC_CET_FLAGS): Change default to auto.
gcc/
* configure: Regenerated.
libatomic/
* configure: Regenerated.
libbacktrace/
* configure: Regenerated.
libcc1/
* configure: Regenerated.
libcpp/
* configure: Regenerated.
libdecnumber/
* configure: Regenerated.
libgcc/
* configure: Regenerated.
libgfortran/
* configure: Regenerated.
libgomp/
* configure: Regenerated.
libitm/
* configure: Regenerated.
libobjc/
* configure: Regenerated.
libquadmath/
* configure: Regenerated.
libsanitizer/
* configure: Regenerated.
libssp/
* configure: Regenerated.
libstdc++-v3/
* configure: Regenerated.
libvtv/
* configure: Regenerated.
zlib/
* configure: Regenerated.
|
|
The following patch provides some further math library fallbacks.
fmaf can be implemented using fma if available, fma and fmal can use
x * y + z as fallback, it is not perfect, but e.g. glibc on various arches
has been using that as fallback for many years,
and copysign/copysignl/fabs/fabsl can be implemented using corresponding
__builtin_* if we make sure that gcc expands it inline instead of using
a library call (these days it is expanded inline on most targets).
2020-04-22 Jakub Jelinek <jakub@redhat.com>
PR libfortran/94694
PR libfortran/94586
* configure.ac: Add math func checks for fmaf, fma and fmal. Add
HAVE_INLINE_BUILTIN_COPYSIGN check.
* c99_protos.h (copysign, fmaf, fma, fmal): Provide fallback
prototypes.
(HAVE_COPYSIGN, HAVE_FMAF, HAVE_FMA, HAVE_FMAL): Define if not
defined and fallback version is provided.
* intrinsics/c99_functions.c (copysign, fmaf, fma, fmal): Provide
fallback implementations if possible
* configure: Regenerated.
* config.h.in: Regenerated.
* math.m4 (GCC_CHECK_MATH_INLINE_BUILTIN_FALLBACK1,
GCC_CHECK_MATH_INLINE_BUILTIN_FALLBACK2): New.
|
|
On bare-metal targets, I/O support is typically provided by a BSP and
requires a linker script and/or hosting library to be specified on the
linker command line. Linking an empty program with the default linker
script may succeed, however, which confuses libstdc++ configuration
when programs that probe for the presence of various I/O features fail
with link errors.
2020-02-12 Sandra Loosemore <sandra@codesourcery.com>
PR libstdc++/79193
PR libstdc++/88999
config/
* no-executables.m4: Use a non-empty program to test for linker
support.
libgcc/
* configure: Regenerated.
libgfortran/
* configure: Regenerated.
libiberty/
* configure: Regenerated.
libitm/
* configure: Regenerated.
libobjc/
* configure: Regenerated.
libquadmath/
* configure: Regenerated.
libssp/
* configure: Regenerated.
libstdc++v-3/
* configure: Regenerated.
|
|
Provide means, in the form of a `--with-toolexeclibdir=' configuration
option, to override the default installation directory for target
libraries, otherwise known as $toolexeclibdir. This is so that it is
possible to get newly-built libraries, particularly the shared ones,
installed in a common place, so that they can be readily used by the
target system as their host libraries, possibly over NFS, without a need
to manually copy them over from the currently hardcoded location they
would otherwise be installed in.
In the presence of the `--enable-version-specific-runtime-libs' option
and for configurations building native GCC the option is ignored.
config/
* toolexeclibdir.m4: New file.
gcc/
* doc/install.texi (Cross-Compiler-Specific Options): Document
`--with-toolexeclibdir' option.
libada/
* Makefile.in (configure_deps): Add `toolexeclibdir.m4'.
* configure.ac: Handle `--with-toolexeclibdir='.
* configure: Regenerate.
libatomic/
* configure.ac: Handle `--with-toolexeclibdir='.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* configure: Regenerate.
* testsuite/Makefile.in: Regenerate.
libffi/
* configure.ac: Handle `--with-toolexeclibdir='.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* configure: Regenerate.
* include/Makefile.in: Regenerate.
* man/Makefile.in: Regenerate.
* testsuite/Makefile.in: Regenerate.
libgcc/
* Makefile.in (configure_deps): Add `toolexeclibdir.m4'.
* configure.ac: Handle `--with-toolexeclibdir='.
* configure: Regenerate.
libgfortran/
* configure.ac: Handle `--with-toolexeclibdir='.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* configure: Regenerate.
libgomp/
* configure.ac: Handle `--with-toolexeclibdir='.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* configure: Regenerate.
* testsuite/Makefile.in: Regenerate.
libhsail-rt/
* configure.ac: Handle `--with-toolexeclibdir='.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* configure: Regenerate.
libitm/
* configure.ac: Handle `--with-toolexeclibdir='.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* configure: Regenerate.
* testsuite/Makefile.in: Regenerate.
libobjc/
* Makefile.in (aclocal_deps): Add `toolexeclibdir.m4'.
* aclocal.m4: Include `toolexeclibdir.m4'.
* configure.ac: Handle `--with-toolexeclibdir='.
* configure: Regenerate.
liboffloadmic/
* plugin/configure.ac: Handle `--with-toolexeclibdir='.
* plugin/Makefile.in: Regenerate.
* plugin/aclocal.m4: Regenerate.
* plugin/configure: Regenerate.
* configure.ac: Handle `--with-toolexeclibdir='.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* configure: Regenerate.
libphobos/
* m4/druntime.m4: Handle `--with-toolexeclibdir='.
* m4/Makefile.in: Regenerate.
* libdruntime/Makefile.in: Regenerate.
* src/Makefile.in: Regenerate.
* testsuite/Makefile.in: Regenerate.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* configure: Regenerate.
libquadmath/
* configure.ac: Handle `--with-toolexeclibdir='.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* configure: Regenerate.
libsanitizer/
* configure.ac: Handle `--with-toolexeclibdir='.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* configure: Regenerate.
* asan/Makefile.in: Regenerate.
* interception/Makefile.in: Regenerate.
* libbacktrace/Makefile.in: Regenerate.
* lsan/Makefile.in: Regenerate.
* sanitizer_common/Makefile.in: Regenerate.
* tsan/Makefile.in: Regenerate.
* ubsan/Makefile.in: Regenerate.
libssp/
* configure.ac: Handle `--with-toolexeclibdir='.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* configure: Regenerate.
libstdc++-v3/
* acinclude.m4: Handle `--with-toolexeclibdir='.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* configure: Regenerate.
* doc/Makefile.in: Regenerate.
* include/Makefile.in: Regenerate.
* libsupc++/Makefile.in: Regenerate.
* po/Makefile.in: Regenerate.
* python/Makefile.in: Regenerate.
* src/Makefile.in: Regenerate.
* src/c++11/Makefile.in: Regenerate.
* src/c++17/Makefile.in: Regenerate.
* src/c++98/Makefile.in: Regenerate.
* src/filesystem/Makefile.in: Regenerate.
* testsuite/Makefile.in: Regenerate.
libvtv/
* configure.ac: Handle `--with-toolexeclibdir='.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* configure: Regenerate.
* testsuite/Makefile.in: Regenerate.
zlib/
* configure.ac: Handle `--with-toolexeclibdir='.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* configure: Regenerate.
|
|
A change made with r275564 ("[ARM/FDPIC v6 02/24] [ARM] FDPIC: Handle
arm*-*-uclinuxfdpiceabi in configure scripts") to libtool.m4 has not
regenerated all the `configure' scripts affected. Fix it.
gcc/
* configure: Regenerate.
libatomic/
* configure: Regenerate.
libbacktrace/
* configure: Regenerate.
libcc1/
* configure: Regenerate.
libffi/
* configure: Regenerate.
libgfortran/
* configure: Regenerate.
libgomp/
* configure: Regenerate.
libhsail-rt/
* configure: Regenerate.
libitm/
* configure: Regenerate.
libobjc/
* configure: Regenerate.
liboffloadmic/
* configure: Regenerate.
libphobos/
* configure: Regenerate.
libquadmath/
* configure: Regenerate.
libsanitizer/
* configure: Regenerate.
libssp/
* configure: Regenerate.
libstdc++-v3/
* configure: Regenerate.
libvtv/
* configure: Regenerate.
lto-plugin/
* configure: Regenerate.
zlib/
* configure: Regenerate.
From-SVN: r276213
|
|
2019-06-25 Kwok Cheung Yeung <kcy@codesourcery.com>
Andrew Stubbs <ams@codesourcery.com>
libgfortran/
* configure: Regenerate.
* configure.ac (LIBGFOR_MINIMAL): Do not use on AMD GCN.
Co-Authored-By: Andrew Stubbs <ams@codesourcery.com>
From-SVN: r272649
|
|
When using posix_spawn or fork to launch a child process, the parent
needs to wait for the child, otherwise the dead child is left as a
zombie process. For this purpose one can install a signal handler for
SIGCHLD.
2019-05-19 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/90038
* intrinsics/execute_command_line (sigchld_handler): New function.
(execute_command_line): Install handler for SIGCHLD.
* configure.ac: Check for presence of sigaction and waitpid.
* config.h.in: Regenerated.
* configure: Regenerated.
Regtested on x86_64-pc-linux-gnu.
From-SVN: r271384
|
|
fork() semantics can be problematic. Most unix style OS'es have
posix_spawn which can be used to replace fork + exec in many cases.
For more information see
e.g. https://www.microsoft.com/en-us/research/uploads/prod/2019/04/fork-hotos19.pdf
This replaces the one use of fork in libgfortran with posix_spawn.
2019-05-17 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/90038
* configure.ac (AC_CHECK_FUNCS_ONCE): Check for posix_spawn.
* intrinsics/execute_command_line (execute_command_line): Use
posix_spawn.
* Makefile.in: Regenerated.
* config.h.in: Regenerated.
* configure: Regenerated.
Regtested on x86_64-pc-linux-gnu.
From-SVN: r271340
|
|
This patch contains the GCN port of libgfortran. We use the minimal
configuration created for NVPTX. That's all that's required, besides the
target-independent bug fixes posted already.
2019-01-17 Andrew Stubbs <ams@codesourcery.com>
Kwok Cheung Yeung <kcy@codesourcery.com>
Julian Brown <julian@codesourcery.com>
Tom de Vries <tom@codesourcery.com>
libgfortran/
* configure.ac: Use minimal mode for amdgcn.
* configure: Regenerate.
Co-Authored-By: Julian Brown <julian@codesourcery.com>
Co-Authored-By: Kwok Cheung Yeung <kcy@codesourcery.com>
Co-Authored-By: Tom de Vries <tom@codesourcery.com>
From-SVN: r268020
|
|
interoperability with C.
2019-01-12 Paul Thomas <pault@gcc.gnu.org>
* gfortran.texi : Add description in sections on TS 29113 and
further interoperability with C.
* trans-array.c (gfc_conv_descriptor_attribute): New function.
(gfc_get_dataptr_offset): Remove static function attribute.
* trans-array.h : Add prototypes for above functions.
* trans-decl.c : Add declarations for the library functions
cfi_desc_to_gfc_desc and gfc_desc_to_cfi_desc.
* trans-expr.c (gfc_conv_gfc_desc_to_cfi_desc): New function.
(gfc_conv_procedure_call): Call it for scalar and array actual
arguments, when the formal arguments are bind_c with assumed
shape or assumed rank.
* trans.h : External declarations for gfor_fndecl_cfi_to_gfc
and gfor_fndecl_gfc_to_cfi.
2019-01-12 Paul Thomas <pault@gcc.gnu.org>
* gfortran.dg/ISO_Fortran_binding_1.f90 : New test.
* gfortran.dg/ISO_Fortran_binding_1.c : Auxilliary file for test.
* gfortran.dg/ISO_Fortran_binding_2.f90 : New test.
* gfortran.dg/ISO_Fortran_binding_2.c : Auxilliary file for test.
* gfortran.dg/bind_c_array_params_2.f90 : Change search string
for dump tree scan.
2019-01-12 Paul Thomas <pault@gcc.gnu.org>
* ISO_Fortran_binding.h : New file.
* Makefile.am : Include ISO_Fortran_binding.c in the list of
files to compile.
* Makefile.in : Regenerated.
* gfortran.map : Add _gfortran_cfi_desc_to_gfc_desc,
_gfortran_gfc_desc_to_cfi_desc and the CFI API functions.
* runtime/ISO_Fortran_binding.c : New file containing the new
functions added to the map.
From-SVN: r267881
|
|
The old __sync builtins have been deprecated for a long time now in
favor of the __atomic builtins following the C++11/C11 memory model.
This patch converts libgfortran to use the modern __atomic builtins.
At the same time I weakened the consistency to relaxed for
incrementing and decrementing the counter, and acquire-release when
decrementing to check whether the counter is 0 and the unit can be
freed. This is similar to e.g. std::shared_ptr in C++.
Regtested on x86_64-pc-linux-gnu.
libgfortran/ChangeLog:
2018-11-22 Janne Blomqvist <jb@gcc.gnu.org>
* acinclude.m4 (LIBGFOR_CHECK_ATOMIC_FETCH_ADD): Rename and test
presence of atomic builtins instead of sync builtins.
* configure.ac (LIBGFOR_CHECK_ATOMIC_FETCH_ADD): Call new test.
* io/io.h (inc_waiting_locked): Use __atomic_fetch_add.
(predec_waiting_locked): Use __atomic_add_fetch.
(dec_waiting_unlocked): Use __atomic_fetch_add.
* config.h.in: Regenerated.
* configure: Regenerated.
* Makefile.in: Regenerated.
From-SVN: r266367
|
|
This patch updates GCC to use autoconf 2.69 and automake 1.15.1.
(That's not the latest automake version, but it's the one used by
binutils-gdb, with which consistency is desirable, and in any case
seems a useful incremental update that should make a future update to
1.16.1 easier.)
The changes are generally similar to the binutils-gdb ones, and are
copied from there where shared files and directories are involved
(there are some further changes to such shared directories, however,
which I'd expect to apply to binutils-gdb once this patch is in GCC).
Largely, obsolete AC_PREREQ calls are removed, while many
AC_LANG_SOURCE calls are added to avoid warnings from aclocal and
autoconf. Multilib support is no longer included in core automake,
meaning that multilib.am needs copying from automake's contrib
directory into the GCC source tree. Autoconf 2.69 has Go support, so
local copies of that support are removed. I hope the D support will
soon be submitted to upstream autoconf so the local copy of that can
be removed in a future update. Changes to how automake generates
runtest calls mean quotes are removed from RUNTEST definitions in five
lib*/testsuite/Makefile.am files (libatomic, libgomp, libitm,
libphobos, libvtv; some others have RUNTEST definitions without
quotes, which are still OK); libgo and libphobos also get
-Wno-override added to AM_INIT_AUTOMAKE so those overrides of RUNTEST
do not generate automake warnings.
Note that the regeneration did not include regeneration of
fixincludes/config.h.in (attempting such regeneration resulted in all
the USED_FOR_TARGET conditionals disappearing; and I don't see
anything in the fixincludes/ directory that would result in such
conditionals being generated, unlike in the gcc/ directory). Also
note that libvtv/testsuite/other-tests/Makefile.in was not
regenerated; that directory is not listed as a subdirectory for which
Makefile.in gets regenerated by calling "automake" in libvtv/, so I'm
not sure how it's meant to be regenerated.
While I mostly fixed warnings should running aclocal / automake /
autoconf, there were various such warnings from automake in the
libgfortran, libgo, libgomp, liboffloadmic, libsanitizer, libphobos
directories that I did not fix, preferring to leave those to the
relevant subsystem maintainers. Specifically, most of those warnings
were of the following form (example from libgfortran):
Makefile.am:48: warning: source file 'caf/single.c' is in a subdirectory,
Makefile.am:48: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they
will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
I think it's best for the relevant maintainers to add subdir-objects
and do any other associated Makefile.am changes needed. In some cases
the paths in the warnings involved ../; I don't know if that adds any
extra complications to the use of subdir-objects.
I've tested this with native, cross and Canadian cross builds. The
risk of any OS-specific issues should I hope be rather lower than if a
libtool upgrade were included (we *should* do such an upgrade at some
point, but it's more complicated - it involves identifying all our
local libtool changes to see if any aren't included in the upstream
version we update to, and reverting an upstream libtool patch that's
inappropriate for use in GCC); I think it would be better to get this
update into GCC so that people can test in different configurations
and we can fix any issues found, rather than to try to get more and
more testing done before it goes in.
top level:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* multilib.am: New file. From automake.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
* ar-lib: New file.
* test-driver: New file.
* configure: Re-generate.
config:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* math.m4, tls.m4: Use AC_LANG_SOURCE.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
fixincludes:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* aclocal.m4, configure: Regenerate.
gcc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use single
line for second argument of AC_DEFINE_UNQUOTED.
* doc/install.texi (Tools/packages necessary for modifying GCC):
Update to autoconf 2.69 and automake 1.15.1.
* aclocal.m4, config.in, configure: Regenerate.
gnattools:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* configure: Regenerate.
gotools:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* config/go.m4: Remove file.
* Makefile.am (ACLOCAL_AMFLAGS): Do not use -I ./config.
* configure.ac: Remove AC_PREREQ. Do not include config/go.m4.
* Makefile.in, aclocal.m4, configure: Regenerate.
intl:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
* configure: Re-generate.
* config.h.in: Re-generate.
* aclocal.m4: Re-generate.
libada:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* configure: Regenerate.
libatomic:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* acinclude.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libbacktrace:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libcc1:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure: Regenerate.
libcpp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* aclocal.m4, config.in, configure: Regenerate.
libdecnumber:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* aclocal.m4.
libffi:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove doc/libffi.info.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, fficonfig.h.in,
include/Makefile.in, man/Makefile.in, testsuite/Makefile.in:
Regenerate.
libgcc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* configure: Regenerate.
libgfortran:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libgo [logically part of this change but omitted from the commit]:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* config/go.m4: Remove file.
* config/libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use
-Wno-override in AM_INIT_AUTOMAKE call.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libgomp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove libgomp.info.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libhsail-rt:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure: Regenerate.
libiberty:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* config.in: Re-generate.
libitm:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
(CLEANFILES): Remove libitm.info.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
libobjc:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ.
* aclocal.m4, config.h.in, configure: Regenerate.
liboffloadmic:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* plugin/Makefile.am: Include multilib.am.
* plugin/configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, plugin/Makefile.in,
plugin/aclocal.m4, plugin/configure: Regenerate.
libphobos:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use -Wno-override in
AM_INIT_AUTOMAKE call.
* m4/autoconf.m4: Add extra argument to AC_LANG_DEFINE call.
* m4/druntime/os.m4: Use AC_LANG_SOURCE.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, libdruntime/Makefile.in,
src/Makefile.in, testsuite/Makefile.in: Regenerate.
libquadmath:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Remove 1.8. Add info-in-builddir.
(all-local): Define outside conditional code.
(CLEANFILES): Remove libquadmath.info.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
libsanitizer:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, asan/Makefile.in, configure,
interception/Makefile.in, libbacktrace/Makefile.in,
lsan/Makefile.in, sanitizer_common/Makefile.in, tsan/Makefile.in,
ubsan/Makefile.in: Regenerate.
libssp:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
(AUTOMAKE_OPTIONS): Remove 1.9.5.
* configure.ac: Remove AC_PREREQ. Quote argument to
AC_RUN_IFELSE.
* Makefile.in, aclocal.m4, configure: Regenerate.
libstdc++-v3:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* Makefile.in, aclocal.m4, configure, doc/Makefile.in,
include/Makefile.in, libsupc++/Makefile.in, po/Makefile.in,
python/Makefile.in, src/Makefile.in, src/c++11/Makefile.in,
src/c++17/Makefile.in, src/c++98/Makefile.in,
src/filesystem/Makefile.in, testsuite/Makefile.in: Regenerate.
libvtv:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
* configure.ac: Remove AC_PREREQ.
* testsuite/Makefile.am (RUNTEST): Remove quotes.
* Makefile.in, aclocal.m4, configure, testsuite/Makefile.in:
Regenerate.
lto-plugin:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE.
* Makefile.in, aclocal.m4, config.h.in, configure: Regenerate.
zlib:
2018-10-31 Joseph Myers <joseph@codesourcery.com>
PR bootstrap/82856
* Makefile.am: Include multilib.am.
Merge from binutils-gdb:
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
From-SVN: r265695
|
|
When producing error and warning messages, libgfortran writes a
message by using many system calls. By using vectored writes (the
POSIX writev function) when available and feasible to use without
major surgery, we reduce the chance that output gets intermingled with
other output to stderr.
In practice, this is done by introducing a new function estr_writev in
addition to the existing estr_write. In order to use this, the old
st_vprintf is removed, replaced by direct calls of vsnprintf, allowing
more message batching.
Regtested on x86_64-pc-linux-gnu.
libgfortran/ChangeLog:
2018-09-21 Janne Blomqvist <jb@gcc.gnu.org>
* config.h.in: Regenerated.
* configure: Regenerated.
* configure.ac: Check for writev and sys/uio.h.
* libgfortran.h: Include sys/uio.h.
(st_vprintf): Remove prototype.
(struct iovec): Define if not available.
(estr_writev): New prototype.
* runtime/backtrace.c (error_callback): Use estr_writev.
* runtime/error.c (ST_VPRINTF_SIZE): Remove.
(estr_writev): New function.
(st_vprintf): Remove.
(gf_vsnprintf): New function.
(ST_ERRBUF_SIZE): New macro.
(st_printf): Use vsnprintf.
(os_error): Use estr_writev.
(runtime_error): Use vsnprintf and estr_writev.
(runtime_error_at): Likewise.
(runtime_warning_at): Likewise.
(internal_error): Use estr_writev.
(generate_error_common): Likewise.
(generate_warning): Likewise.
(notify_std): Likewise.
* runtime/pause.c (pause_string): Likewise.
* runtime/stop.c (report_exception): Likewise.
(stop_string): Likewise.
(error_stop_string): Likewise.
From-SVN: r264487
|
|
* configure.ac: Check for <sys/random.h>.
* configure, config.h.in: Regenerate.
* intrinsics/random.c [HAVE_SYS_RANDOM_H]: Include <sys/random.h>.
From-SVN: r263543
|
|
The getentropy function, found on Linux, OpenBSD, and recently also
FreeBSD, can be used to get random bytes to initialize the PRNG. It
is similar to the traditional way of reading from /dev/urandom, but
being a system call rather than a special file, it doesn't suffer from
problems like running out of file descriptors, or failure when running
in a container where /dev/urandom may not be available.
Regtested on x86_64-pc-linux-gnu, Ok for trunk?
2018-08-13 Janne Blomqvist <jb@gcc.gnu.org>
* configure.ac: Check for getentropy.
* intrinsics/random.c (getosrandom): Use getentropy if available.
* config.h.in: Regenerated.
* configure: Regenerated.
From-SVN: r263522
|
|
* configure: Regenerated.
From-SVN: r259610
|
|
--enable-cet=default with --enable-cet=auto.
* config/cet.m4 (GCC_CET_FLAGS): Default to --disable-cet, replace
--enable-cet=default with --enable-cet=auto.
* doc/install.texi: Document --disable-cet being the default and
--enable-cet=auto.
* configure: Regenerated.
From-SVN: r259487
|
|
PR jit/85384
* acx.m4 (GCC_BASE_VER): Remove \$\$ from sed expression.
* configure.ac (gcc-driver-name.h): Honor --with-gcc-major-version
by using gcc_base_ver to generate a gcc_driver_version, and use
it when generating GCC_DRIVER_NAME.
* configure: Regenerate.
* configure: Regenerate.
From-SVN: r259462
|
|
ENDBR32 and RDSSPD are multi-byte NOPs on x86-64 processors and
newer x86 processors, starting Pentium Pro. They are UD on older
32-bit processors. Detect this at configure time and adjust the
default value for enable_cet. GCC will enable CET in 32-bit run-time
libraries in any case if --enable-cet is used to configure GCC.
PR target/84148
* config/cet.m4: Check if target support multi-byte NOPS (SSE).
* libatomic/configure: Regenerate.
* libbacktrace/configure: Likewise.
* libgcc/configure: Likewise.
* libgfortran/configure: Likewise.
* libgomp/configure: Likewise.
* libitm/configure: Likewise.
* libmpx/configure: Likewise.
* libobjc/configure: Likewise.
* libquadmath/configure: Likewise.
* libsanitizer/configure: Likewise.
* libssp/configure: Likewise.
* libstdc++-v3/configure: Likewise.
* libvtv/configure: Likewise.
From-SVN: r257809
|
|
libgfortran/
* acinclude.m4: Add enable.m4, cet.m4.
* Makefile.in: Regenerate.
* configure: Likewise.
* configure.ac: Set CET_FLAGS. Update AM_FCFLAGS,
AM_CFLAGS, CFLAGS.
From-SVN: r254902
|
|
* acinclude.m4 (LIBGFOR_CHECK_FMA3): Use test from
check_effective_target_fma in gcc.target/i386/i386.exp.
(LIBGFOR_CHECK_FMA4): Use test from check_effective_target_fma4.
* configure: Regenerate.
From-SVN: r248547
|
|
2017-05-26 Thomas Koenig <tkoenig@gcc.gnu.org>
PR boostrap/80889
* acinclude.m4: Also set HAVE_AVX128 on the false
branch of LIBGFOR_CHECK_AVX128.
* configure: Regenerated.
From-SVN: r248519
|
