| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
The non-atomic path does not have range information,
we have to adjust the assert handle that case, too.
libgcc/ChangeLog:
* unwind-dw2-fde.c: Fix assert in non-atomic path.
|
|
The assertion in __deregister_frame_info_bases assumes that for every
frame something was inserted into the lookup data structure by
__register_frame_info_bases. Unfortunately, this does not necessarily
hold true as the btree_insert call in __register_frame_info_bases will
not insert anything for empty ranges. Therefore, we need to explicitly
account for such empty ranges in the assertion as `ob` will be a null
pointer for such ranges, hence causing the assertion to fail.
Signed-off-by: Sören Tempel <soeren@soeren-tempel.net>
libgcc/ChangeLog:
* unwind-dw2-fde.c: Accept empty ranges when deregistering frames.
|
|
|
|
Replace LR.aq/SC.rl pairs with the SEQ_CST LR.aqrl/SC.rl pairs
recommended by table A.6 of the ISA manual.
2023-04-27 Patrick O'Neill <patrick@rivosinc.com>
libgcc/ChangeLog:
* config/riscv/atomic.c: Change LR.aq/SC.rl pairs into
sequentially consistent LR.aqrl/SC.rl pairs.
Signed-off-by: Patrick O'Neill <patrick@rivosinc.com>
|
|
|
|
This patch aligns the configuration to the actual PRU capabilities. It
also reduces the size of the affected libgcc functions.
For a real-world project using integer arithmetics the savings
are significant:
Before:
text data bss dec hex filename
3688 865 544 5097 13e9 hc-sr04-range-sensor.elf
With TARGET_HAS_NO_HW_DIVIDE defined:
text data bss dec hex filename
2824 865 544 4233 1089 hc-sr04-range-sensor.elf
Execution speed also appears to have improved. The moddi3 function is
now executed in half the CPU cycles.
libgcc/ChangeLog:
* config/pru/t-pru (HOST_LIBGCC2_CFLAGS): Add
-DTARGET_HAS_NO_HW_DIVIDE.
Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
|
|
|
|
With this, execution time for e.g. __moddi3 go from 59 to 40 cycles in
the "fast" case or from 290 to 200 cycles in the "slow" case (when the
!TARGET_HAS_NO_HW_DIVIDE variant calls division and modulus functions
for 32-bit SImode), as exposed by gcc.c-torture/execute/arith-rand-ll.c
compiled for -march=v10.
Unfortunately, it just puts a performance improvement "dent" of 0.07%
in a arith-rand-ll.c-based performance test - where all loops are also
reduced to 1/10.
The size of every affected libgcc function is reduced to less than
half and they are all now leaf functions.
* config/cris/t-cris (HOST_LIBGCC2_CFLAGS): Add
-DTARGET_HAS_NO_HW_DIVIDE.
|
|
RISC-V has no support for subword atomic operations; code currently
generates libatomic library calls.
This patch changes the default behavior to inline subword atomic calls
(using the same logic as the existing library call).
Behavior can be specified using the -minline-atomics and
-mno-inline-atomics command line flags.
gcc/libgcc/config/riscv/atomic.c has the same logic implemented in asm.
This will need to stay for backwards compatibility and the
-mno-inline-atomics flag.
2023-04-18 Patrick O'Neill <patrick@rivosinc.com>
gcc/ChangeLog:
PR target/104338
* config/riscv/riscv-protos.h: Add helper function stubs.
* config/riscv/riscv.cc: Add helper functions for subword masking.
* config/riscv/riscv.opt: Add command-line flag.
* config/riscv/sync.md: Add masking logic and inline asm for fetch_and_op,
fetch_and_nand, CAS, and exchange ops.
* doc/invoke.texi: Add blurb regarding command-line flag.
libgcc/ChangeLog:
PR target/104338
* config/riscv/atomic.c: Add reference to duplicate logic.
gcc/testsuite/ChangeLog:
PR target/104338
* gcc.target/riscv/inline-atomics-1.c: New test.
* gcc.target/riscv/inline-atomics-2.c: New test.
* gcc.target/riscv/inline-atomics-3.c: New test.
* gcc.target/riscv/inline-atomics-4.c: New test.
* gcc.target/riscv/inline-atomics-5.c: New test.
* gcc.target/riscv/inline-atomics-6.c: New test.
* gcc.target/riscv/inline-atomics-7.c: New test.
* gcc.target/riscv/inline-atomics-8.c: New test.
Signed-off-by: Patrick O'Neill <patrick@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
|
|
reversed direction [PR109402]
muldi3 will deallocate stack space after the call to __save_r26_r31,
then re-allocate the space a short while later. If an interrupt
occurs in that window, it can clobber items on the stack.
PR target/109402
libgcc/
* config/v850/lib1funcs.S (___muldi3): Remove unnecessary
stack manipulations.
|
|
|
|
The millicode division and remainder routines trap division by zero.
The unwinder needs these directives to unwind divide by zero traps.
2023-04-05 John David Anglin <danglin@gcc.gnu.org>
libgcc/ChangeLog:
PR target/109374
* config/pa/milli64.S (RETURN_COLUMN): Define.
($$divI): Add CFI directives.
($$divU): Likewise.
($$remI): Likewise.
($$remU): Likewise.
|
|
|
|
We should always carry the exceptions forward. This bug was found when
working on testing glibc math tests, many tests were failing with
Overflow and Underflow flags not set. This was traced to here.
libgcc/ChangeLog:
* config/or1k/sfp-machine.h (FP_HANDLE_EXCEPTIONS): Remove
statement clearing existing exceptions.
|
|
|
|
gcc/
* config/xtensa/linux.h (TARGET_ASM_FILE_END): New macro.
libgcc/
* config/xtensa/crti.S: Add .note.GNU-stack section on linux.
* config/xtensa/crtn.S: Likewise.
* config/xtensa/lib1funcs.S: Likewise.
* config/xtensa/lib2funcs.S: Likewise.
|
|
|
|
x86_64/i686 has for a few months working std::bfloat16_t support, __bf16
there is no longer a storage only type, but can be used for arithmetics
and is supported in libgcc and libstdc++.
The following patch adds similar support for AArch64.
Unlike the x86 changes, this one keeps the old __bf16 mangling of
u6__bf16 rather than DF16b (so an exception from Itanium ABI), but
otherwise __bf16 and decltype (0.0bf16) are the same type and both
in C++ act as extended floating-point type.
2023-03-13 Jakub Jelinek <jakub@redhat.com>
gcc/
* config/aarch64/aarch64.h (aarch64_bf16_type_node): Remove.
(aarch64_bf16_ptr_type_node): Adjust comment.
* config/aarch64/aarch64.cc (aarch64_gimplify_va_arg_expr): Use
bfloat16_type_node rather than aarch64_bf16_type_node.
(aarch64_libgcc_floating_mode_supported_p,
aarch64_scalar_mode_supported_p): Also support BFmode.
(aarch64_invalid_conversion, aarch64_invalid_unary_op): Remove.
(aarch64_invalid_binary_op): Remove BFmode related rejections.
(TARGET_INVALID_CONVERSION, TARGET_INVALID_UNARY_OP): Don't redefine.
* config/aarch64/aarch64-builtins.cc (aarch64_bf16_type_node): Remove.
(aarch64_int_or_fp_type): Use bfloat16_type_node rather than
aarch64_bf16_type_node.
(aarch64_init_simd_builtin_types): Likewise.
(aarch64_init_bf16_types): Likewise. Don't create bfloat16_type_node,
which is created in tree.cc already.
* config/aarch64/aarch64-sve-builtins.def (svbfloat16_t): Likewise.
gcc/testsuite/
* gcc.target/aarch64/sve/acle/general-c/ternary_bfloat16_opt_n_1.c:
Don't expect one __bf16 related error.
* gcc.target/aarch64/bfloat16_vector_typecheck_1.c: Adjust or remove
dg-error directives for __bf16 being an extended arithmetic type.
* gcc.target/aarch64/bfloat16_vector_typecheck_2.c: Likewise.
* gcc.target/aarch64/bfloat16_scalar_typecheck.c: Likewise.
* g++.target/aarch64/bfloat_cpp_typecheck.C: Don't expect two __bf16
related errors.
libgcc/
* config/aarch64/t-softfp (softfp_extensions): Add bfsf.
(softfp_truncations): Add tfbf dfbf sfbf hfbf.
(softfp_extras): Add floatdibf floatundibf floattibf floatuntibf.
* config/aarch64/libgcc-softfp.ver (GCC_13.0.0): Export
__extendbfsf2 and __trunc{s,d,t,h}fbf2.
* config/aarch64/sfp-machine.h (_FP_NANFRAC_B, _FP_NANSIGN_B): Define.
* soft-fp/floatundibf.c: New file.
* soft-fp/floatdibf.c: New file.
libstdc++-v3/
* config/abi/pre/gnu.ver (CXXABI_1.3.14): Also export __bf16 tinfos
if it isn't mangled as DF16b but u6__bf16.
|
|
|
|
While DI <-> BF conversions can be handled (and are) through
DI <-> XF <-> BF and for narrower integral modes even sometimes
through DF or SF, because XFmode has 64-bit mantissa and so all
the DImode values are exactly representable in XFmode.
That is not the case for TImode, and while e.g. the HF -> TI
conversions are IMHO useless in libgcc, because HFmode has
-65504.0f16, 65504.0f16 range, all the integers will be already
representable in SImode (or even HImode for unsigned) and so
I think HF -> DI -> TI conversions are faster and valid,
BFmode has roughly the same range as SFmode and so we absolutely need
the TI -> BF conversions to avoid double rounding.
As for BF -> TI conversions, they can be either also implemented
in libgcc, or they can be implemented (as done in this commit)
as BF -> SF -> TI conversions with the same code generation used
elsewhere, just doing the 16-bit left shift of the bits - I think
we don't need to handle sNaNs during the BF -> SF part because
SF -> TI (which is already a libcall too) will handle that too.
The BF -> SF -> TI path avoids wasting
32: 0000000000015e10 321 FUNC GLOBAL DEFAULT 13 __fixbfti@@GCC_13.0.0
89: 0000000000015f60 299 FUNC GLOBAL DEFAULT 13 __fixunsbfti@@GCC_13.0.0
2023-03-10 Jakub Jelinek <jakub@redhat.com>
PR target/107703
* optabs.cc (expand_fix): For conversions from BFmode to integral,
use shifts to convert it to SFmode first and then convert SFmode
to integral.
* soft-fp/floattibf.c: New file.
* soft-fp/floatuntibf.c: New file.
* config/i386/libgcc-glibc.ver: Export __float{,un}tibf @ GCC_13.0.0.
* config/i386/64/t-softfp (softfp_extras): Add floattibf and
floatuntibf.
(CFLAGS-floattibf.c, CFLAGS-floatunstibf.c): Add -msse2.
|
|
|
|
As PR108727 shows, when cleanup code called by the stack
unwinder calls function _Unwind_Resume, it goes via plt
stub like:
function 00000000.plt_call._Unwind_Resume:
=> 0x0000000010003580 <+0>: std r2,40(r1)
0x0000000010003584 <+4>: ld r12,-31760(r2)
0x0000000010003588 <+8>: mtctr r12
0x000000001000358c <+12>: ld r2,-31752(r2)
0x0000000010003590 <+16>: cmpldi r2,0
0x0000000010003594 <+20>: bnectr+
0x0000000010003598 <+24>: b 0x100031a4
<_Unwind_Resume@plt>
It wants to save TOC base (r2) to r1 + 40, but we only
bump the stack segment by 32 bytes as follows:
stdu %r29,-32(%r3)
It means the access is out of the stack segment allocated
by __generic_morestack, once the touch area isn't writable
like this failure shows, it would cause segment fault.
So fix the bump size with one reasonable value PARAMS.
PR libgcc/108727
libgcc/ChangeLog:
* config/rs6000/morestack.S (__morestack): Use PARAMS for new stack
bump size.
|
|
|
|
This patch updates the IEEE 128-bit types used in libgcc.
At the moment, we cannot build GCC when the target uses IEEE 128-bit long
doubles, such as building the compiler for a native Fedora 36 system. The
build dies when it is trying to build the _mulkc3.c and _divkc3 modules.
This patch changes libgcc to use long double for the IEEE 128-bit base type if
long double is IEEE 128-bit, and it uses _Float128 otherwise. The built-in
functions are adjusted to be the correct version based on the IEEE 128-bit base
type used.
While it is desirable to ultimately have __float128 and _Float128 use the same
internal type and mode within GCC, at present if you use the option
-mabi=ieeelongdouble, the __float128 type will use the long double type and not
the _Float128 type. We get an internal compiler error if we combine the
signbitf128 built-in with a long double type.
I've gone through several iterations of trying to fix this within GCC, and
there are various problems that have come up. I developed this alternative
patch that changes libgcc so that it does not tickle the issue. I hope we can
fix the compiler at some point, but right now, this is preventing people on
Fedora 36 systems from building compilers where the default long double is IEEE
128-bit.
2023-03-06 Michael Meissner <meissner@linux.ibm.com>
libgcc/
PR target/107299
* config/rs6000/_divkc3.c (COPYSIGN): Use the correct built-in based on
whether long double is IBM or IEEE.
(INFINITY): Likewise.
(FABS): Likewise.
* config/rs6000/_mulkc3.c (COPYSIGN): Likewise.
(INFINITY): Likewise.
* config/rs6000/quad-float128.h (TF): Remove definition.
(TFtype): Define to be long double or _Float128.
(TCtype): Define to be _Complex long double or _Complex _Float128.
* libgcc2.h (TFtype): Allow machine config files to override this.
(TCtype): Likewise.
* soft-fp/quad.h (TFtype): Likewise.
|
|
|
|
gcc/ChangeLog:
* config/riscv/riscv.h (RISCV_DWARF_VLENB): New.
(DWARF_FRAME_REGISTERS): New.
(DWARF_REG_TO_UNWIND_COLUMN): New.
libgcc/ChangeLog:
* config.host (riscv*-*-*): Add config/riscv/value-unwind.h.
* config/riscv/value-unwind.h: New.
|
|
|
|
I have noticed some warnings when building GCC for arm-eabi:
pr-support.c:110:7: warning: variable ‘set_pac_sp’ set but not used [-Wunused-but-set-variable]
pr-support.c:109:7: warning: variable ‘set_pac’ set but not used [-Wunused-but-set-variable]
This small patch avoids them by defining these two variables undef
TARGET_HAVE_PACBTI, like the code which actually uses them.
libgcc/
* config/arm/pr-support.c (__gnu_unwind_execute): Use
TARGET_HAVE_PACBTI to define set_pac and set_pac_sp.
|
|
|
|
Tested by building a toolchain and compiling gnumach for x86_64 [1].
This is the basic version without unwind support which I think is only
required to implement exceptions.
[1]
https://github.com/flavioc/cross-hurd/blob/master/bootstrap-kernel.sh.
gcc/ChangeLog:
* config.gcc: Recognize x86_64-*-gnu* targets and include
i386/gnu64.h.
* config/i386/gnu64.h: Define configuration for new target
including ld.so location.
libgcc/ChangeLog:
* config.host: Recognize x86_64-*-gnu* targets.
* config/i386/gnu-unwind.h: Update to handle __x86_64__ with a
TODO for now.
Signed-off-by: Flavio Cruz <flaviocruz@gmail.com>
|
|
|
|
This patch adds support for Arm frame unwinding instruction "0xb5" [1]. When
an exception is taken and "0xb5" instruction is encounter during runtime
stack-unwinding, we use effective vsp as modifier in pointer authentication.
On completion of stack unwinding if "0xb5" instruction is not encountered
then CFA will be used as modifier in pointer authentication.
[1] https://github.com/ARM-software/abi-aa/releases/download/2022Q3/ehabi32.pdf
libgcc/ChangeLog:
2022-11-09 Srinath Parvathaneni <srinath.parvathaneni@arm.com>
* config/arm/pr-support.c (__gnu_unwind_execute): Decode opcode
"0xb5".
|
|
This patch adds authentication for when the stack is unwound when an
exception is taken. All the changes here are done to the runtime code
in libgcc's unwinder code for Arm target. All the changes are guarded
under defined (__ARM_FEATURE_PAC_DEFAULT) and activated only if the
+pacbti feature is switched on for the architecture. This means that
switching on the target feature via -march or -mcpu is sufficient and
-mbranch-protection need not be enabled. This ensures that the
unwinder is authenticated only if the PACBTI instructions are
available in the non-NOP space as it uses AUTG. Just generating
PAC/AUT instructions using -mbranch-protection will not enable
authentication on the unwinder.
Pre-approved with the requested changes here
<https://gcc.gnu.org/pipermail/gcc-patches/2021-December/586555.html>.
gcc/ChangeLog:
* ginclude/unwind-arm-common.h (_Unwind_VRS_RegClass): Introduce
new pseudo register class _UVRSC_PAC.
libgcc/ChangeLog:
* config/arm/pr-support.c (__gnu_unwind_execute): Decode
exception opcode (0xb4) for saving RA_AUTH_CODE and authenticate
with AUTG if found.
* config/arm/unwind-arm.c (struct pseudo_regs): New.
(phase1_vrs): Introduce new field to store pseudo-reg state.
(phase2_vrs): Likewise.
(_Unwind_VRS_Get): Load pseudo register state from virtual reg set.
(_Unwind_VRS_Set): Store pseudo register state to virtual reg set.
(_Unwind_VRS_Pop): Load pseudo register value from stack into VRS.
Co-Authored-By: Tejas Belagod <tbelagod@arm.com>
Co-Authored-By: Srinath Parvathaneni <srinath.parvathaneni@arm.com>
|
|
|
|
A recent change only initializes the regs.how[] during Dwarf unwinding
which resulted in an uninitialized offset used in return address signing
and random failures during unwinding. The fix is to encode the return
address signing state in REG_UNSAVED and a new state REG_UNSAVED_ARCHEXT.
libgcc/
PR target/107678
* unwind-dw2.h (REG_UNSAVED_ARCHEXT): Add new enum.
* unwind-dw2.c (uw_update_context_1): Add REG_UNSAVED_ARCHEXT case.
* unwind-dw2-execute_cfa.h: Use REG_UNSAVED_ARCHEXT/REG_UNSAVED to
encode the return address signing state.
* config/aarch64/aarch64-unwind.h (aarch64_demangle_return_addr)
Check current return address signing state.
(aarch64_frob_update_contex): Remove.
|
|
|
|
|
|
This change updates the atomic libcall support to fix the following
issues:
1) A internal compiler error with -fno-sync-libcalls.
2) When sync libcalls are disabled, we don't generate libcalls for
libatomic.
3) There is no sync libcall support for targets other than linux.
As a result, non-atomic stores are silently emitted for types
smaller or equal to the word size. There are now a few atomic
libcalls in the libgcc code, so we need sync support on all
targets.
2023-01-13 John David Anglin <danglin@gcc.gnu.org>
gcc/ChangeLog:
* config/pa/pa-linux.h (TARGET_SYNC_LIBCALL): Delete define.
* config/pa/pa.cc (pa_init_libfuncs): Use MAX_SYNC_LIBFUNC_SIZE
define.
* config/pa/pa.h (TARGET_SYNC_LIBCALLS): Use flag_sync_libcalls.
(MAX_SYNC_LIBFUNC_SIZE): Define.
(TARGET_CPU_CPP_BUILTINS): Define __SOFTFP__ when soft float is
enabled.
* config/pa/pa.md (atomic_storeqi): Emit __atomic_exchange_1
libcall when sync libcalls are disabled.
(atomic_storehi, atomic_storesi, atomic_storedi): Likewise.
(atomic_loaddi): Emit __atomic_load_8 libcall when sync libcalls
are disabled on 32-bit target.
* config/pa/pa.opt (matomic-libcalls): New option.
* doc/invoke.texi (HPPA Options): Update.
libgcc/ChangeLog:
* config.host (hppa*64*-*-linux*): Adjust tmake_file to use
pa/t-pa64-linux.
(hppa*64*-*-hpux11*): Adjust tmake_file to use pa/t-pa64-hpux
instead of pa/t-hpux and pa/t-pa64.
* config/pa/linux-atomic.c: Define u32 type.
(ATOMIC_LOAD): Define new macro to implement atomic_load_1,
atomic_load_2, atomic_load_4 and atomic_load_8. Update sync
defines to use atomic_load calls for type.
(SYNC_LOCK_LOAD_2): New macro to implement __sync_lock_load_8.
* config/pa/sync-libfuncs.c: New file.
* config/pa/t-netbsd (LIB2ADD_ST): Define.
* config/pa/t-openbsd (LIB2ADD_ST): Define.
* config/pa/t-pa64-hpux: New file.
* config/pa/t-pa64-linux: New file.
|
|
GCC 13 has a new implementation of gthr-win32.h which supports C++11
mutexes, threads etc. but this causes an unintended ABI break. The
__gthread_mutex_t type is always used in std::basic_filebuf even in
C++98, so independent of whether C++11 sync primitives work or not.
Because that type changed for the win32 thread model, we have a layout
change in std::basic_filebuf. The member is completely unused, it just
gets passed to the std::__basic_file constructor and ignored. So we
don't need that mutex to actually work, we just need its layout to not
change.
Introduce a new __gthr_win32_legacy_mutex_t struct in gthr-win32.h with
the old layout, and conditionally use that in std::basic_filebuf.
PR libstdc++/108331
libgcc/ChangeLog:
* config/i386/gthr-win32.h (__gthr_win32_legacy_mutex_t): New
struct matching the previous __gthread_mutex_t struct.
(__GTHREAD_LEGACY_MUTEX_T): Define.
libstdc++-v3/ChangeLog:
* config/io/c_io_stdio.h (__c_lock): Define as a typedef for
__GTHREAD_LEGACY_MUTEX_T if defined.
|
|
The patch to convert all thumb1 code in libgcc to unified syntax
omitted changing all swi instructions to the current name: svc.
libgcc/ChangeLog:
* config/arm/lib1funcs.S (clear_cache): Use SVC to conform to
unified syntax.
|
|
|
|
Recently, mingw-w64 has got updated <msxml.h> from Wine which is included
indirectly by <windows.h> if `WIN32_LEAN_AND_MEAN` is not defined. The
`IXMLDOMDocument` class has a member function named `abort()`, which gets
affected by our `abort()` macro in "system.h".
`WIN32_LEAN_AND_MEAN` should, nevertheless, always be defined. This
can exclude 'APIs such as Cryptography, DDE, RPC, Shell, and Windows
Sockets' [1], and speed up compilation of these files a bit.
[1] https://learn.microsoft.com/en-us/windows/win32/winprog/using-the-windows-headers
gcc/
PR middle-end/108300
* config/xtensa/xtensa-dynconfig.c: Define `WIN32_LEAN_AND_MEAN`
before <windows.h>.
* diagnostic-color.cc: Likewise.
* plugin.cc: Likewise.
* prefix.cc: Likewise.
gcc/ada/
PR middle-end/108300
* adaint.c: Define `WIN32_LEAN_AND_MEAN` before `#include
<windows.h>`.
* cio.c: Likewise.
* ctrl_c.c: Likewise.
* expect.c: Likewise.
* gsocket.h: Likewise.
* mingw32.h: Likewise.
* mkdir.c: Likewise.
* rtfinal.c: Likewise.
* rtinit.c: Likewise.
* seh_init.c: Likewise.
* sysdep.c: Likewise.
* terminals.c: Likewise.
* tracebak.c: Likewise.
gcc/jit/
PR middle-end/108300
* jit-w32.h: Define `WIN32_LEAN_AND_MEAN` before <windows.h>.
libatomic/
PR middle-end/108300
* config/mingw/lock.c: Define `WIN32_LEAN_AND_MEAN` before
<windows.h>.
libffi/
PR middle-end/108300
* src/aarch64/ffi.c: Define `WIN32_LEAN_AND_MEAN` before
<windows.h>.
libgcc/
PR middle-end/108300
* config/i386/enable-execute-stack-mingw32.c: Define
`WIN32_LEAN_AND_MEAN` before <windows.h>.
* libgcc2.c: Likewise.
* unwind-generic.h: Likewise.
libgfortran/
PR middle-end/108300
* intrinsics/sleep.c: Define `WIN32_LEAN_AND_MEAN` before
<windows.h>.
libgomp/
PR middle-end/108300
* config/mingw32/proc.c: Define `WIN32_LEAN_AND_MEAN` before
<windows.h>.
libiberty/
PR middle-end/108300
* make-temp-file.c: Define `WIN32_LEAN_AND_MEAN` before <windows.h>.
* pex-win32.c: Likewise.
libssp/
PR middle-end/108300
* ssp.c: Define `WIN32_LEAN_AND_MEAN` before <windows.h>.
libstdc++-v3/
PR middle-end/108300
* src/c++11/system_error.cc: Define `WIN32_LEAN_AND_MEAN` before
<windows.h>.
* src/c++11/thread.cc: Likewise.
* src/c++17/fs_ops.cc: Likewise.
* src/filesystem/ops.cc: Likewise.
libvtv/
PR middle-end/108300
* vtv_malloc.cc: Define `WIN32_LEAN_AND_MEAN` before <windows.h>.
* vtv_rts.cc: Likewise.
* vtv_utils.cc: Likewise.
|
|
|
|
The parameters fs->data_align and fs->code_align always have fixed
values for a particular target in GCC-generated code. Specialize
execute_cfa_program for these values, to avoid multiplications.
gcc/c-family/
* c-cppbuiltin.cc (c_cpp_builtins): Define
__LIBGCC_DWARF_CIE_DATA_ALIGNMENT__.
libgcc/
* unwind-dw2-execute_cfa.h: New file. Extracted from
the execute_cfa_program function in unwind-dw2.c.
* unwind-dw2.c (execute_cfa_program_generic): New function.
(execute_cfa_program_specialized): Likewise.
(execute_cfa_program): Call execute_cfa_program_specialized
or execute_cfa_program_generic, as appropriate.
|
|
constant"
This reverts commit 97bbdb726aba76ead550e25061029cf0aa78671b.
|
|
This reverts commit cb775ecd6e437de8fdba9a3f173f3787e90e98f2.
|
|
|
|
The parameters fs->data_align and fs->code_align always have fixed
values for a particular target in GCC-generated code. Specialize
execute_cfa_program for these values, to avoid multiplications.
gcc/c-family/
* c-cppbuiltin.cc (c_cpp_builtins): Define
__LIBGCC_DWARF_CIE_DATA_ALIGNMENT__.
libgcc/
* unwind-dw2-execute_cfa.h: New file. Extracted from
the execute_cfa_program function in unwind-dw2.c.
* unwind-dw2.c (execute_cfa_program_generic): New function.
(execute_cfa_program_specialized): Likewise.
(execute_cfa_program): Call execute_cfa_program_specialized
or execute_cfa_program_generic, as appropriate.
|
