aboutsummaryrefslogtreecommitdiff
path: root/libffi
AgeCommit message (Collapse)AuthorFilesLines
2021-10-26Daily bump.GCC Administrator1-0/+5
2021-10-25rs6000: Fix bootstrap (libffi)Segher Boessenkool2-0/+4
This fixes bootstrap for the current problems building libffi. 2021-10-25 Segher Boessenkool <segher@kernel.crashing.org> libffi/ * src/powerpc/linux64.S: Enable AltiVec insns. * src/powerpc/linux64_closure.S: Ditto.
2021-10-21Daily bump.GCC Administrator1-0/+85
2021-10-20libffi: Update ChangeLog.libffi for libffi 3.4.2H.J. Lu1-2/+6825
* ChangeLog.libffi: Copied from ChangeLog.old in libffi 3.4.2.
2021-10-20libffi: Add LOCAL_PATCHESH.J. Lu1-0/+2
* LOCAL_PATCHES: New file.
2021-10-20libffi: Integrate testsuite with GCC testsuiteH.J. Lu1-9/+15
* testsuite/lib/libffi.exp (load_gcc_lib): Load library from GCC testsuite. Load target-supports.exp and target-supports-dg.exp. (libffi-init): Use libraries in GCC build tree. (libffi_target_compile): Link with -shared-libgcc -lstdc++ for C++ sources.
2021-10-20libffi: Integrate build with GCCH.J. Lu11-86/+25054
1. Integrate with GCC build. 2. Disable static trampolines by default. 3. Support multilib. * Makefile.am (AUTOMAKE_OPTIONS): Add info-in-builddir. (ACLOCAL_AMFLAGS): Set to -I .. -I ../config. (SUBDIRS): Don't add doc. (TEXINFO_TEX): New. (MAKEINFOFLAGS): Likewise. (info_TEXINFOS): Likewise. (STAMP_GENINSRC): Likewise. (STAMP_BUILD_INFO): Likewise. (all-local): Likewise. (stamp-geninsrc): Likewise. (doc/libffi.info): Likewise. (stamp-build-info:): Likewise. (CLEANFILES): Likewise. (MAINTAINERCLEANFILES): Likewise. (AM_MAKEFLAGS): Likewise. (all-recursive): Likewise. (install-recursive): Likewise. (mostlyclean-recursive): Likewise. (clean-recursive): Likewise. (distclean-recursive): Likewise. (maintainer-clean-recursive): Likewise. (LTLDFLAGS): Replace libtool-ldflags with ../libtool-ldflags. (AM_CFLAGS): Add -g -fexceptions. (libffi.map-sun): Replace make_sunver.pl with ../contrib/make_sunver.pl. (dist-hook): Removed. Include $(top_srcdir)/../multilib.am. * configure.ac: Add AM_ENABLE_MULTILIB. Remove the frv*-elf check. (AX_ENABLE_BUILDDIR): Removed. (AM_INIT_AUTOMAKE): Add [no-dist]. Add --enable-generated-files-in-srcdir. (C_CONFIG_MACRO_DIR): Removed. (AX_COMPILER_VENDOR): Likewise. (AX_CC_MAXOPT): Likewise. (AX_CFLAGS_WARN_ALL): Likewise. Remove the GCC check. (SYMBOL_UNDERSCORE): Removed. (AX_CHECK_COMPILE_FLAG): Likewise. Remove --disable-docs. (ACX_CHECK_PROG_VER): Check makeinfo. (BUILD_DOCS): Updated. (exec-static-tramp): Don't enable use of static exec trampolines by default. Remove --disable-multi-os-directory. (GCC_WITH_TOOLEXECLIBDIR): New. Support cross host. Support --enable-multilib. * include/Makefile.am (nodist_include_HEADERS): Removed. (gcc_version): New. (toollibffidir): Likewise. (toollibffi_HEADERS): Likewise. * Makefile.in: Regenerate. (GCC_BASE_VER): New. (AC_CONFIG_FILES): Remove doc/Makefile. (AC_CONFIG_LINKS): New. * aclocal.m4: Likewise. * configure: Likewise. * fficonfig.h.in: Likewise. * mdate-sh: Likewise. * include/Makefile.in: Likewise. * man/Makefile.in: Likewise. * testsuite/Makefile.in: Likewise.
2021-10-20libffi: Sync with libffi 3.4.2H.J. Lu236-30147/+17051
Merged commit: f9ea41683444ebe11cfa45b05223899764df28fb
2021-10-20libffi: Add HOWTO_MERGE, autogen.sh and merge.shH.J. Lu3-0/+75
Add scripts for syncing with libffi upstream: 1. Clone libffi repo. 2. Checkout the specific commit. 3. Remove the unused files. 4. Add new files and remove old files if needed. * HOWTO_MERGE: New file. * autogen.sh: Likewise. * merge.sh: Likewise.
2021-08-31Daily bump.GCC Administrator1-0/+6
2021-08-30libffi: Fix MIPS r6 supportYunQiang Su2-0/+10
for some instructions, MIPS r6 uses different encoding other than the previous releases. 1. mips/n32.S disable .set mips4: since it casuses old insn encoding is used. https://github.com/libffi/libffi/pull/396 has been accepted as: 94c102aa69b04337f63498e0e6551fcdce549ae5 2. mips/ffi.c: the encoding for JR is hardcoded: we need to use different value for r6 and pre-r6. https://github.com/libffi/libffi/pull/401 has been accpeted as: 746dbe3a6a79a41931c03b51df2972be4d5e5028 libffi/ PR libffi/83636 * src/mips/n32.S: disable .set mips4 * src/mips/ffi.c: use different JR encoding for r6.
2021-07-10Daily bump.GCC Administrator1-0/+5
2021-07-09libffi/x86: Always check __x86_64__ for x86 hostsH.J. Lu1-14/+7
The upstream libffi has commit cb8474368cdef3207638d047bd6c707ad8fcb339 Author: hjl-tools <hjl.tools@gmail.com> Date: Wed Dec 2 12:52:12 2020 -0800 libffi/x86: Always check __x86_64__ for x32 hosts (#601) (#602) Since for x86_64-*x32 and x86_64-x32-* hosts, -m32 generates ia32 codes. We should always check __x86_64__ for x32 hosts. Since for gnux32 hosts, -m32 generates i386 codes, always check __x86_64__ for x86 hosts. PR libffi/101336 * configure.host: Always check __x86_64__ for x86 hosts.
2021-06-17Daily bump.GCC Administrator1-0/+8
2021-06-16libffi: Fix up x86_64 classify_argumentJakub Jelinek2-4/+112
As the following testcase shows, libffi didn't handle properly classify_arguments of structures at byte offsets not divisible by UNITS_PER_WORD. The following patch adjusts it to match what config/i386/ classify_argument does for that and also ports the PR38781 fix there (the second chunk). This has been committed to upstream libffi already: https://github.com/libffi/libffi/commit/5651bea284ad0822eafe768e3443c2f4d7da2c8f 2021-06-16 Jakub Jelinek <jakub@redhat.com> * src/x86/ffi64.c (classify_argument): For FFI_TYPE_STRUCT set words to number of words needed for type->size + byte_offset bytes rather than just type->size bytes. Compute pos before the loop and check total size of the structure. * testsuite/libffi.call/nested_struct12.c: New test.
2021-01-06Daily bump.GCC Administrator1-0/+4
2021-01-05Update GNU/Hurd configure supportSamuel Thibault1-11/+1
ChangeLog: * libtool.m4: Match gnu* along other GNU systems. * libgo/config/libtool.m4: Match gnu* along other GNU systems. * libgo/configure: Re-generate. libffi/ * configure: Re-generate. libgomp/ * configure: Re-generate. gcc/ * configure: Re-generate. libatomic/ * configure: Re-generate. libbacktrace/ * configure: Re-generate. libcc1/ * configure: Re-generate. libgfortran/ * configure: Re-generate. libgomp/ * configure: Re-generate. libhsail-rt/ * configure: Re-generate. libitm/ * configure: Re-generate. libobjc/ * configure: Re-generate. liboffloadmic/ * configure: Re-generate. * plugin/configure: Re-generate. libphobos/ * configure: Re-generate. libquadmath/ * configure: Re-generate. libsanitizer/ * configure: Re-generate. libssp/ * configure: Re-generate. libstdc++-v3/ * configure: Re-generate. libvtv/ * configure: Re-generate. lto-plugin/ * configure: Re-generate. zlib/ * configure: Re-generate.
2020-12-06Daily bump.GCC Administrator1-0/+5
2020-12-05Darwin : Update libtool and dependencies for Darwin20 [PR97865]Iain Sandoe1-16/+18
The change in major version (and the increment from Darwin19 to 20) caused libtool tests to fail which resulted in incorrect build settings for shared libraries. We take this opportunity to sort out the shared undefined symbols state rather than propagating the current unsound behaviour into a new rev. This change means that we default to the case that missing symbols are considered an error, and if one wants to allow this intentionally, the confiuration for that case should be set appropriately. Three existing cases need undefined dynamic lookup: libitm, where there is already a configuration mechanism to add the flags. libcc1, where we add simple configuration to add the flags for Darwin. libsanitizer, where we can add to the existing extra flags. libcc1/ChangeLog: PR target/97865 * Makefile.am: Add dynamic_lookup to LD flags for Darwin. * configure.ac: Test for Darwin host and set a flag. * Makefile.in: Regenerate. * configure: Regenerate. libitm/ChangeLog: PR target/97865 * configure.tgt: Add dynamic_lookup to XLDFLAGS for Darwin. * configure: Regenerate. libsanitizer/ChangeLog: PR target/97865 * configure.tgt: Add dynamic_lookup to EXTRA_CXXFLAGS for Darwin. * configure: Regenerate. ChangeLog: PR target/97865 * libtool.m4: Update handling of Darwin platform link flags for Darwin20. gcc/ChangeLog: PR target/97865 * configure: Regenerate. libatomic/ChangeLog: PR target/97865 * configure: Regenerate. libbacktrace/ChangeLog: PR target/97865 * configure: Regenerate. libffi/ChangeLog: PR target/97865 * configure: Regenerate. libgfortran/ChangeLog: PR target/97865 * configure: Regenerate. libgomp/ChangeLog: PR target/97865 * configure: Regenerate. libhsail-rt/ChangeLog: PR target/97865 * configure: Regenerate. libobjc/ChangeLog: PR target/97865 * configure: Regenerate. libphobos/ChangeLog: PR target/97865 * configure: Regenerate. libquadmath/ChangeLog: PR target/97865 * configure: Regenerate. libssp/ChangeLog: PR target/97865 * configure: Regenerate. libstdc++-v3/ChangeLog: PR target/97865 * configure: Regenerate. libvtv/ChangeLog: PR target/97865 * configure: Regenerate. zlib/ChangeLog: PR target/97865 * configure: Regenerate.
2020-11-30Daily bump.GCC Administrator1-0/+4
2020-11-29Fix hppa64-hpux11 build to remove source paths from embedded path.John David Anglin1-4/+4
This change adds the +nodefaultrpath ld option to remove all library paths that were specified with the -L option from the embedded path. 2020-11-29 John David Anglin <danglin@gcc.gnu.org> ChangeLog: * libtool.m4 (archive_cmds): Add +nodefaultrpath ld option on hppa64-*-hpux11*. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libhsail-rt/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. liboffloadmic/ChangeLog: * configure: Regenerate. * plugin/configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2020-09-25Daily bump.GCC Administrator1-0/+12
2020-09-24Re: [RS6000] Power10 libffi fixesAlan Modra1-1/+3
Adding a nop broke ffi_closure_LINUX64! * src/powerpc/linux64_closure.S (ffi_closure_LINUX64): Correct location of .Lret.
2020-09-24[RS6000] Power10 libffi fixesAlan Modra2-1/+19
Power10 pc-relative code doesn't use or preserve r2 as a TOC pointer. That means calling between pc-relative and TOC using code can't be done without intervening linker stubs, and a call from TOC code to pc-relative code must have a nop after the bl in order to restore r2. Now the PowerPC libffi assembly code doesn't use r2 except for the implicit use when making calls back to C, ffi_closure_helper_LINUX64 and ffi_prep_args64. So changing the assembly to interoperate with pc-relative code without stubs is easily done. * src/powerpc/linux64.S (ffi_call_LINUX64): Don't emit global entry when __PCREL__. Call using @notoc. Add nops. * src/powerpc/linux64_closure.S (ffi_closure_LINUX64): Likewise. (ffi_go_closure_linux64): Likewise.
2020-04-25libffi/test: Fix compilation for build sysrootMaciej W. Rozycki7-0/+30
Fix a problem with the libffi testsuite using a method to determine the compiler to use resulting in the tool being different from one the library has been built with, and causing a catastrophic failure from the inability to actually choose any compiler at all in a cross-compilation configuration. Address this problem by providing a DejaGNU configuration file defining the compiler to use, via the CC_FOR_TARGET TCL variable, set from $CC by autoconf, which will have all the required options set for the target compiler to build executables in the environment configured, removing failures like: FAIL: libffi.call/closure_fn0.c -W -Wall -Wno-psabi -O0 (test for excess errors) Excess errors: default_target_compile: No compiler to compile with UNRESOLVED: libffi.call/closure_fn0.c -W -Wall -Wno-psabi -O0 compilation failed to produce executable and bringing overall test results for the `riscv64-linux-gnu' target (here with the `x86_64-linux-gnu' host and RISC-V QEMU in the Linux user emulation mode as the target board) from: === libffi Summary === # of unexpected failures 708 # of unresolved testcases 708 # of unsupported tests 30 to: === libffi Summary === # of expected passes 1934 # of unsupported tests 28 This is a combined backport of the relevant parts of upstream libffi changes as follows: - commit 8308984e479e ("[PATCH] Make sure we're running dejagnu tests with the right compiler."), - commit 2d9b3939751b ("[PATCH] Fix for closures with sunpro compiler"), - commit 0c3824702d3d ("[PATCH] Always set CC_FOR_TARGET for dejagnu, to make the testsuite respect $CC"), - commit 7d698125b1f0 ("[PATCH] Use the proper C++ compiler to run C++ tests"), - commit 6b6df1a7bb37 ("[PATCH] Adds `local.exp` to CLEANFILES"), - commit 6cf0dea78a5a ("[PATCH] Change CLEANFILES to DISTCLEANFILES") libffi/ * Makefile.am (DISTCLEANFILES): New variable. * configure.ac: Produce `local.exp'. * Makefile.in: Regenerate. * configure: Regenerate. * testsuite/Makefile.am (EXTRA_DEJAGNU_SITE_CONFIG): New variable. * testsuite/Makefile.in: Regenerate.
2020-01-24Add `--with-toolexeclibdir=' configuration optionMaciej W. Rozycki8-4/+55
Provide means, in the form of a `--with-toolexeclibdir=' configuration option, to override the default installation directory for target libraries, otherwise known as $toolexeclibdir. This is so that it is possible to get newly-built libraries, particularly the shared ones, installed in a common place, so that they can be readily used by the target system as their host libraries, possibly over NFS, without a need to manually copy them over from the currently hardcoded location they would otherwise be installed in. In the presence of the `--enable-version-specific-runtime-libs' option and for configurations building native GCC the option is ignored. config/ * toolexeclibdir.m4: New file. gcc/ * doc/install.texi (Cross-Compiler-Specific Options): Document `--with-toolexeclibdir' option. libada/ * Makefile.in (configure_deps): Add `toolexeclibdir.m4'. * configure.ac: Handle `--with-toolexeclibdir='. * configure: Regenerate. libatomic/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * testsuite/Makefile.in: Regenerate. libffi/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * include/Makefile.in: Regenerate. * man/Makefile.in: Regenerate. * testsuite/Makefile.in: Regenerate. libgcc/ * Makefile.in (configure_deps): Add `toolexeclibdir.m4'. * configure.ac: Handle `--with-toolexeclibdir='. * configure: Regenerate. libgfortran/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. libgomp/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * testsuite/Makefile.in: Regenerate. libhsail-rt/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. libitm/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * testsuite/Makefile.in: Regenerate. libobjc/ * Makefile.in (aclocal_deps): Add `toolexeclibdir.m4'. * aclocal.m4: Include `toolexeclibdir.m4'. * configure.ac: Handle `--with-toolexeclibdir='. * configure: Regenerate. liboffloadmic/ * plugin/configure.ac: Handle `--with-toolexeclibdir='. * plugin/Makefile.in: Regenerate. * plugin/aclocal.m4: Regenerate. * plugin/configure: Regenerate. * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. libphobos/ * m4/druntime.m4: Handle `--with-toolexeclibdir='. * m4/Makefile.in: Regenerate. * libdruntime/Makefile.in: Regenerate. * src/Makefile.in: Regenerate. * testsuite/Makefile.in: Regenerate. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. libquadmath/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. libsanitizer/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * asan/Makefile.in: Regenerate. * interception/Makefile.in: Regenerate. * libbacktrace/Makefile.in: Regenerate. * lsan/Makefile.in: Regenerate. * sanitizer_common/Makefile.in: Regenerate. * tsan/Makefile.in: Regenerate. * ubsan/Makefile.in: Regenerate. libssp/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. libstdc++-v3/ * acinclude.m4: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. * include/Makefile.in: Regenerate. * libsupc++/Makefile.in: Regenerate. * po/Makefile.in: Regenerate. * python/Makefile.in: Regenerate. * src/Makefile.in: Regenerate. * src/c++11/Makefile.in: Regenerate. * src/c++17/Makefile.in: Regenerate. * src/c++98/Makefile.in: Regenerate. * src/filesystem/Makefile.in: Regenerate. * testsuite/Makefile.in: Regenerate. libvtv/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * testsuite/Makefile.in: Regenerate. zlib/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate.
2019-09-27Regenerate `configure' scripts for `uclinuxfdpiceabi' libtool.m4 updateMaciej W. Rozycki2-6/+20
A change made with r275564 ("[ARM/FDPIC v6 02/24] [ARM] FDPIC: Handle arm*-*-uclinuxfdpiceabi in configure scripts") to libtool.m4 has not regenerated all the `configure' scripts affected. Fix it. gcc/ * configure: Regenerate. libatomic/ * configure: Regenerate. libbacktrace/ * configure: Regenerate. libcc1/ * configure: Regenerate. libffi/ * configure: Regenerate. libgfortran/ * configure: Regenerate. libgomp/ * configure: Regenerate. libhsail-rt/ * configure: Regenerate. libitm/ * configure: Regenerate. libobjc/ * configure: Regenerate. liboffloadmic/ * configure: Regenerate. libphobos/ * configure: Regenerate. libquadmath/ * configure: Regenerate. libsanitizer/ * configure: Regenerate. libssp/ * configure: Regenerate. libstdc++-v3/ * configure: Regenerate. libvtv/ * configure: Regenerate. lto-plugin/ * configure: Regenerate. zlib/ * configure: Regenerate. From-SVN: r276213
2019-09-03re PR other/79543 (Inappropriate "ld --version" checking)Chung-Lin Tang3-3/+10
2019-09-03 Chung-Lin Tang <cltang@codesourcery.com> libatomic/ PR other/79543 * acinclude.m4 (LIBAT_CHECK_LINKER_FEATURES): Fix GNU ld --version scanning to conform to the GNU Coding Standards. * configure: Regenerate. libffi/ PR other/79543 * acinclude.m4 (LIBAT_CHECK_LINKER_FEATURES): Fix GNU ld --version scanning to conform to the GNU Coding Standards. * configure: Regenerate. libgomp/ PR other/79543 * acinclude.m4 (LIBGOMP_CHECK_LINKER_FEATURES): Fix GNU ld --version scanning to conform to the GNU Coding Standards. * configure: Regenerate. libitm/ PR other/79543 * acinclude.m4 (LIBITM_CHECK_LINKER_FEATURES): Fix GNU ld --version scanning to conform to the GNU Coding Standards. * configure: Regenerate. libstdc++-v3/ PR other/79543 * acinclude.m4 (GLIBCXX_CHECK_LINKER_FEATURES): Fix GNU ld --version scanning to conform to the GNU Coding Standards. * configure: Regenerate. From-SVN: r275341
2018-10-31Update GCC to autoconf 2.69, automake 1.15.1 (PR bootstrap/82856).Joseph Myers10-1634/+2152
This patch updates GCC to use autoconf 2.69 and automake 1.15.1. (That's not the latest automake version, but it's the one used by binutils-gdb, with which consistency is desirable, and in any case seems a useful incremental update that should make a future update to 1.16.1 easier.) The changes are generally similar to the binutils-gdb ones, and are copied from there where shared files and directories are involved (there are some further changes to such shared directories, however, which I'd expect to apply to binutils-gdb once this patch is in GCC). Largely, obsolete AC_PREREQ calls are removed, while many AC_LANG_SOURCE calls are added to avoid warnings from aclocal and autoconf. Multilib support is no longer included in core automake, meaning that multilib.am needs copying from automake's contrib directory into the GCC source tree. Autoconf 2.69 has Go support, so local copies of that support are removed. I hope the D support will soon be submitted to upstream autoconf so the local copy of that can be removed in a future update. Changes to how automake generates runtest calls mean quotes are removed from RUNTEST definitions in five lib*/testsuite/Makefile.am files (libatomic, libgomp, libitm, libphobos, libvtv; some others have RUNTEST definitions without quotes, which are still OK); libgo and libphobos also get -Wno-override added to AM_INIT_AUTOMAKE so those overrides of RUNTEST do not generate automake warnings. Note that the regeneration did not include regeneration of fixincludes/config.h.in (attempting such regeneration resulted in all the USED_FOR_TARGET conditionals disappearing; and I don't see anything in the fixincludes/ directory that would result in such conditionals being generated, unlike in the gcc/ directory). Also note that libvtv/testsuite/other-tests/Makefile.in was not regenerated; that directory is not listed as a subdirectory for which Makefile.in gets regenerated by calling "automake" in libvtv/, so I'm not sure how it's meant to be regenerated. While I mostly fixed warnings should running aclocal / automake / autoconf, there were various such warnings from automake in the libgfortran, libgo, libgomp, liboffloadmic, libsanitizer, libphobos directories that I did not fix, preferring to leave those to the relevant subsystem maintainers. Specifically, most of those warnings were of the following form (example from libgfortran): Makefile.am:48: warning: source file 'caf/single.c' is in a subdirectory, Makefile.am:48: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. I think it's best for the relevant maintainers to add subdir-objects and do any other associated Makefile.am changes needed. In some cases the paths in the warnings involved ../; I don't know if that adds any extra complications to the use of subdir-objects. I've tested this with native, cross and Canadian cross builds. The risk of any OS-specific issues should I hope be rather lower than if a libtool upgrade were included (we *should* do such an upgrade at some point, but it's more complicated - it involves identifying all our local libtool changes to see if any aren't included in the upstream version we update to, and reverting an upstream libtool patch that's inappropriate for use in GCC); I think it would be better to get this update into GCC so that people can test in different configurations and we can fix any issues found, rather than to try to get more and more testing done before it goes in. top level: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * multilib.am: New file. From automake. Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * libtool.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE. * ar-lib: New file. * test-driver: New file. * configure: Re-generate. config: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * math.m4, tls.m4: Use AC_LANG_SOURCE. Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69. fixincludes: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * aclocal.m4, configure: Regenerate. gcc: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use single line for second argument of AC_DEFINE_UNQUOTED. * doc/install.texi (Tools/packages necessary for modifying GCC): Update to autoconf 2.69 and automake 1.15.1. * aclocal.m4, config.in, configure: Regenerate. gnattools: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * configure: Regenerate. gotools: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * config/go.m4: Remove file. * Makefile.am (ACLOCAL_AMFLAGS): Do not use -I ./config. * configure.ac: Remove AC_PREREQ. Do not include config/go.m4. * Makefile.in, aclocal.m4, configure: Regenerate. intl: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ. * configure: Re-generate. * config.h.in: Re-generate. * aclocal.m4: Re-generate. libada: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * configure: Regenerate. libatomic: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * acinclude.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ. * testsuite/Makefile.am (RUNTEST): Remove quotes. * Makefile.in, aclocal.m4, configure, testsuite/Makefile.in: Regenerate. libbacktrace: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. * Makefile.in, aclocal.m4, config.h.in, configure: Regenerate. libcc1: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, configure: Regenerate. libcpp: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. * aclocal.m4, config.in, configure: Regenerate. libdecnumber: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * aclocal.m4. libffi: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. (AUTOMAKE_OPTIONS): Add info-in-builddir. (CLEANFILES): Remove doc/libffi.info. * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, configure, fficonfig.h.in, include/Makefile.in, man/Makefile.in, testsuite/Makefile.in: Regenerate. libgcc: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. * configure: Regenerate. libgfortran: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, config.h.in, configure: Regenerate. libgo [logically part of this change but omitted from the commit]: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * config/go.m4: Remove file. * config/libtool.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use -Wno-override in AM_INIT_AUTOMAKE call. * Makefile.in, aclocal.m4, configure, testsuite/Makefile.in: Regenerate. libgomp: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am (AUTOMAKE_OPTIONS): Add info-in-builddir. (CLEANFILES): Remove libgomp.info. * configure.ac: Remove AC_PREREQ. * testsuite/Makefile.am (RUNTEST): Remove quotes. * Makefile.in, aclocal.m4, configure, testsuite/Makefile.in: Regenerate. libhsail-rt: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, configure: Regenerate. libiberty: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * config.in: Re-generate. libitm: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. (AUTOMAKE_OPTIONS): Add info-in-builddir. (CLEANFILES): Remove libitm.info. * configure.ac: Remove AC_PREREQ. * testsuite/Makefile.am (RUNTEST): Remove quotes. * Makefile.in, aclocal.m4, configure, testsuite/Makefile.in: Regenerate. libobjc: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * aclocal.m4, config.h.in, configure: Regenerate. liboffloadmic: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. * plugin/Makefile.am: Include multilib.am. * plugin/configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, configure, plugin/Makefile.in, plugin/aclocal.m4, plugin/configure: Regenerate. libphobos: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. Use -Wno-override in AM_INIT_AUTOMAKE call. * m4/autoconf.m4: Add extra argument to AC_LANG_DEFINE call. * m4/druntime/os.m4: Use AC_LANG_SOURCE. * testsuite/Makefile.am (RUNTEST): Remove quotes. * Makefile.in, aclocal.m4, configure, libdruntime/Makefile.in, src/Makefile.in, testsuite/Makefile.in: Regenerate. libquadmath: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. (AUTOMAKE_OPTIONS): Remove 1.8. Add info-in-builddir. (all-local): Define outside conditional code. (CLEANFILES): Remove libquadmath.info. * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, config.h.in, configure: Regenerate. libsanitizer: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. * Makefile.in, aclocal.m4, asan/Makefile.in, configure, interception/Makefile.in, libbacktrace/Makefile.in, lsan/Makefile.in, sanitizer_common/Makefile.in, tsan/Makefile.in, ubsan/Makefile.in: Regenerate. libssp: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. (AUTOMAKE_OPTIONS): Remove 1.9.5. * configure.ac: Remove AC_PREREQ. Quote argument to AC_RUN_IFELSE. * Makefile.in, aclocal.m4, configure: Regenerate. libstdc++-v3: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, configure, doc/Makefile.in, include/Makefile.in, libsupc++/Makefile.in, po/Makefile.in, python/Makefile.in, src/Makefile.in, src/c++11/Makefile.in, src/c++17/Makefile.in, src/c++98/Makefile.in, src/filesystem/Makefile.in, testsuite/Makefile.in: Regenerate. libvtv: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. * testsuite/Makefile.am (RUNTEST): Remove quotes. * Makefile.in, aclocal.m4, configure, testsuite/Makefile.in: Regenerate. lto-plugin: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. * Makefile.in, aclocal.m4, config.h.in, configure: Regenerate. zlib: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * configure.ac: Modernize AC_INIT call, remove AC_PREREQ. * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. From-SVN: r265695
2018-08-27Replace 8 spaces with a tabular in ChangeLog files.Martin Liska1-2/+2
From-SVN: r263886
2018-08-15backport: ffi.c (ffi_call_go, [...]): New functions.Andreas Schwab4-13/+140
Backport of RISC-V support for libffi go closures * src/riscv/ffi.c (ffi_call_go, ffi_prep_go_closure): New functions. (ffi_call_int): Renamed from ffi_call. (ffi_call_asm, ffi_closure_inner): Adjust interface. * src/riscv/ffitarget.h (FFI_GO_CLOSURES): Define. * src/riscv/sysv.S (ffi_go_closure_asm): New function. (ffi_closure_asm, ffi_call_asm): Update for adjusted interfaces. From-SVN: r263550
2018-05-08Backport of RISC-V support for libffiAndreas Schwab7-2/+766
* configure.host: Add RISC-V support. * Makefile.am: Likewise. * Makefile.in: Regenerate. * src/riscv/ffi.c, src/riscv/ffitarget.h, src/riscv/sysv.S: New files. From-SVN: r260033
2018-05-04libffi PowerPC64 ELFv1 fp arg fixesAlan Modra2-16/+58
The ELFv1 ABI says: "Single precision floating point values are mapped to the second word in a single doubleword" and also "Floating point registers f1 through f13 are used consecutively to pass up to 13 floating point values, one member aggregates passed by value containing a floating point value, and to pass complex floating point values". libffi wasn't expecting float args in the second word, and wasn't passing one member aggregates in fp registers. This patch fixes those problems, making use of the existing ELFv2 homogeneous aggregate support since a one element fp struct is a special case of an homogeneous aggregate. I've also set a flag when returning pointers that might be used one day. This is just a tidy since the ppc64 assembly support code currently doesn't test FLAG_RETURNS_64BITS for integer types.. * src/powerpc/ffi_linux64.c (discover_homogeneous_aggregate): Compile for ELFv1 too, handling single element aggregates. (ffi_prep_cif_linux64_core): Call discover_homogeneous_aggregate for ELFv1. Set FLAG_RETURNS_64BITS for FFI_TYPE_POINTER return. (ffi_prep_args64): Call discover_homogeneous_aggregate for ELFv1, and handle single element structs containing float or double as if the element wasn't wrapped in a struct. Store floats in second word of doubleword slot when big-endian. (ffi_closure_helper_LINUX64): Similarly. From-SVN: r259934
2018-04-18re PR jit/85384 (libgccjit does not work if --with-gcc-major-version is used)David Malcolm2-1/+6
PR jit/85384 * acx.m4 (GCC_BASE_VER): Remove \$\$ from sed expression. * configure.ac (gcc-driver-name.h): Honor --with-gcc-major-version by using gcc_base_ver to generate a gcc_driver_version, and use it when generating GCC_DRIVER_NAME. * configure: Regenerate. * configure: Regenerate. From-SVN: r259462
2017-10-03Import from libffi master repository.Tony Reix5-9/+595
2017-08-31 Tony Reix <tony.reix@atos.net> * src/powerpc/aix.S (ffi_call_AIX): Add debugging pseudo-op and labels for EH. (ffi_call_go_AIX): New function. (_GLOBAL__F_libffi_src_powerpc_aix): New EH frame. * src/powerpc/aix_closure.S (ffi_closure_ASM): Add debugging pseudo-op and labels for EH. (ffi_go_closure_ASM): New function. (_GLOBAL__F_libffi_src_powerpc_aix_closure): New EH frame. * src/powrpc/ffi_darwin.c (ffi_call_go): New function. (ffi_prep_go_closure): New function. (ffi_closure_helper_common): Rename from ffi_closure_helper_DARWIN. (ffi_closure_helper_DARWIN): Call ffi_closure_helper_common. (ffi_go_closure_helper_DARWIN): Call ffi_closure_helper_common. * src/powerpc/ffitarget.h (FFI_GO_CLOSURES): Define. From-SVN: r253386
2017-01-21re PR other/79046 (g++ -print-file-name=plugin uses full version number in path)Jakub Jelinek8-4/+42
PR other/79046 libatomic/ * testsuite/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * testsuite/Makefile.in: Regenerated. libffi/ * configure.ac: Add GCC_BASE_VER. * include/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. * testsuite/Makefile.in: Regenerated. * include/Makefile.in: Regenerated. * Makefile.in: Regenerated. * man/Makefile.in: Regenerated. libgomp/ * testsuite/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * testsuite/Makefile.in: Regenerated. libitm/ * testsuite/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * testsuite/Makefile.in: Regenerated. libmpx/ * mpxrt/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * mpxwrap/Makefile.am (gcc_version): Likewise. * mpxrt/Makefile.in: Regenerated. * mpxwrap/Makefile.in: Regenerated. liboffloadmic/ * plugin/configure.ac: Add GCC_BASE_VER. * plugin/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * plugin/configure: Regenerated. * plugin/aclocal.m4: Regenerated. * plugin/Makefile.in: Regenerated. libsanitizer/ * interception/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * asan/Makefile.am (gcc_version): Likewise. * ubsan/Makefile.am (gcc_version): Likewise. * sanitizer_common/Makefile.am (gcc_version): Likewise. * lsan/Makefile.am (gcc_version): Likewise. * tsan/Makefile.am (gcc_version): Likewise. * interception/Makefile.in: Regenerated. * asan/Makefile.in: Regenerated. * ubsan/Makefile.in: Regenerated. * sanitizer_common/Makefile.in: Regenerated. * lsan/Makefile.in: Regenerated. * tsan/Makefile.in: Regenerated. libvtv/ * testsuite/Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * testsuite/Makefile.in: Regenerated. From-SVN: r244742
2016-11-15config-ml.in: Remove references to GCJ.Matthias Klose2-1/+4
<toplevel> 2016-11-15 Matthias Klose <doko@ubuntu.com> * config-ml.in: Remove references to GCJ. * configure.ac: Likewise. * configure: Regenerate. config/ 2016-11-15 Matthias Klose <doko@ubuntu.com> multi.m4: Don't set GCJ. gcc/ 2016-11-15 Matthias Klose <doko@ubuntu.com> * doc/install.texi: Remove references to gcj/libjava. * doc/invoke.texi: Likewise. */ (where necessary) 2016-11-15 Matthias Klose <doko@ubuntu.com> * configure: Regenerate. From-SVN: r242433
2016-09-04ffi.c (ffi_struct_type): Put type declaration on separate line.John David Anglin6-93/+224
* src/pa/ffi.c (ffi_struct_type): Put type declaration on separate line. (ffi_prep_args_pa32): Likewise. (ffi_size_stack_pa32): Likewise. (ffi_prep_cif_machdep): Likewise. (ffi_call): Likewise. Rename to ffi_call_int. Add closure argument and update call to ffi_call_pa32. (ffi_call, ffi_call_go, ffi_prep_go_closure): New. (ffi_closure_inner_pa32): Update to handle go closures. * src/pa/ffitarget.h (FFI_GO_CLOSURES): Define. * src/pa/hpux32.S (ffi_call_pa32): Pass go closure argument in static chain register (%ret1). (ffi_closure_pa32): Set closure type argument to zero. (ffi_go_closure_pa32): New function. Add unwind data for it. * src/pa/linux.S: Likewise. Use cfi directives for unwind data. * testsuite/libffi.go/static-chain.h (STATIC_CHAIN_REG): Define for hppa. From-SVN: r239978
2016-05-23[PR libffi/65567] libffi: Fix, and simply libffi_feature_testThomas Schwinge2-5/+11
libffi/ PR libffi/65567 * testsuite/lib/libffi.exp (libffi_feature_test): Fix, and simply. From-SVN: r236594
2016-03-17Summary: libffi: define FFI_SIZEOF_JAVA_RAW for aarch64 ILP32Andreas Schwab2-0/+6
* src/aarch64/ffitarget.h (FFI_SIZEOF_JAVA_RAW) [__ILP32__]: Define. From-SVN: r234282
2016-03-05libffi: Match upstream sonameRichard Henderson3-8/+13
* libtool-version: Increase to 7:0:0. * libffi.map.in: Increase version numbers to 7.0. From-SVN: r234009
2016-03-03Fix passing object names to make_sunver.plRainer Orth3-4/+8
* Makefile.am (libffi.map-sun): Properly convert $(libffi_la_OBJECTS) to object names. * Makefile.in: Regenerate. From-SVN: r233938
2016-03-03Tabify libffi/Makefile.amRainer Orth3-10/+15
* Makefile.am (libffi.map-sun): Tabify: * Makefile.in: Regenerate. From-SVN: r233936
2016-03-02re PR libffi/70024 (libffi ABI change w/o SONAME bump)Richard Henderson4-15/+31
PR libffi/70024 * Makefile.am (libffi_version_script): Look in cwd for libffi.map. (libffi_version_dep, libffi.map-sun): Likewise. (libffi.map): New target. * libffi.map.in: Rename from libffi.map. Add required defines, includes, and conditionals. From-SVN: r233926
2016-03-02re PR libffi/70024 (libffi ABI change w/o SONAME bump)Richard Henderson11-9/+965
PR libffi/70024 * Makefile.am (libffi_version_script): New. (libffi_version_dep): New. (libffi_version_info): New. (libffi_la_LDFLAGS): Include libffi_version_info, libffi_version_script. (libffi_la_DEPENDENCIES): Include libffi_version_dep. * acinclude.m4 (LIBAT_ENABLE, LIBAT_CHECK_LINKER_FEATURES): New. (LIBAT_ENABLE_SYMVERS, LIBAT_BUILD_VERSIONED_SHLIB): New. (LIBAT_BUILD_VERSIONED_SHLIB_GNU): New. (LIBAT_BUILD_VERSIONED_SHLIB_SUN): New. * configure.ac: Invoke LIBAT_ENABLE_SYMVERS. * libffi.map: New file. * libtool-version: Increase to 5.0.0. * Makefile.in, configure: Rebuild. * man/Makefile.in, testsuite/Makefile.in: Rebuild. From-SVN: r233921
2015-10-27re PR libffi/65441 (FAIL: libffi.call/float2.c -W -Wall -Wno-psabi (test for ↵John David Anglin3-1/+8
excess errors)) PR libffi/65441 * testsuite/lib/libffi.exp: Load target-supports-dg.exp. * testsuite/libffi.call/float2.c: Don't run on hppa*-*-hpux*. From-SVN: r229400
2015-10-01[RS6000] Correct powerpc sysv stack argument accountingAlan Modra2-109/+104
ppc32 starts using the stack for integer arg passing when we run out of integer arg passing registers. Similarly, we start using the stack for floating point args when we run out of floating point registers. The decision on where an integer arg goes does not depend on number of floating point args, nor does the decision on where a floating point arg goes depend on number of integer args. Alignment of stack args also simply depends on number of stack args. This patch untangles the horrible mess we had, with intarg_count being wrongly used to count both integer args and stack words. * src/powerpc/ffi_sysv.c (ffi_prep_cif_sysv_core): Count fprs, gprs, and stack words separately. (ffi_prep_args_SYSV): Similarly. From-SVN: r228307
2015-05-13libffi: Bump to automake 1.11.6Michael Haubenwallner8-114/+295
2015-05-13 Michael Haubenwallner <michael.haubenwallner@ssi-schaefer.com> * Makefile.in: Regenerated with automake-1.11.6. * aclocal.m4: Likewise. * configure: Likewise. * fficonfig.h.in: Likewise. * include/Makefile.in: Likewise. * man/Makefile.in: Likewise. * testsuite/Makefile.in: Likewise. From-SVN: r223142
2015-03-29re PR libffi/65567 (ERROR: tcl error sourcing ↵John David Anglin2-1/+7
/test/gnu/gcc/gcc/libffi/testsuite/libffi.complex/complex.exp) PR libffi/65567 * testsuite/lib/libffi.exp (libffi_feature_test): Use split to ensure lindex is applied to a list. From-SVN: r221765
2015-02-10ffitarget.h (ffi_arg): Use unsigned long long for ILP32.Andrew Pinski3-3/+32
2015-02-10 Andrew Pinski <apinski@cavium.com> * src/aarch64/ffitarget.h (ffi_arg): Use unsigned long long for ILP32. (FFI_SIZEOF_ARG): Define to 64 for ILP32. (ffi_sarg): Use signed long long for ILP32. * src/aarch64/sysv.S (PTR_REG): New macro. (PTR_SIZE): New macro. (ffi_closure_SYSV): Load cif, fn and user_data using PTR_REG. (ffi_go_closure_SYSV): Load cif and fn using PTR_REG. From-SVN: r220598
generated by cgit v1.1 at 2024-11-03 23:15:53 +0000