aboutsummaryrefslogtreecommitdiff
path: root/libatomic
AgeCommit message (Collapse)AuthorFilesLines
2023-11-14Daily bump.GCC Administrator1-0/+5
2023-11-10libatomic: Improve ifunc selection on AArch64Wilco Dijkstra1-1/+25
Add support for ifunc selection based on CPUID register. Neoverse N1 supports atomic 128-bit load/store, so use the FEAT_USCAT ifunc like newer Neoverse cores. Reviewed-by: Kyrylo.Tkachov@arm.com libatomic: * config/linux/aarch64/host-config.h (ifunc1): Use CPUID in ifunc selection.
2023-10-27Daily bump.GCC Administrator1-0/+14
2023-10-26libatomic: Consider '--with-build-sysroot=[...]' for target libraries' ↵Thomas Schwinge6-3/+15
build-tree testing (instead of build-time 'CC' etc.) [PR109951] Similar to commit fb5d27be272b71fb9026224535fc73f125ce3be7 "libgomp: Consider '--with-build-sysroot=[...]' for target libraries' build-tree testing (instead of build-time 'CC' etc.) [PR91884, PR109951]", this is commit 5ff06d762a88077aff0fb637c931c64e6f47f93d "libatomic/test: Fix compilation for build sysroot" done differently, avoiding build-tree testing use of any random gunk that may appear in build-time 'CC'. PR testsuite/109951 libatomic/ * configure.ac: 'AC_SUBST(SYSROOT_CFLAGS_FOR_TARGET)'. * Makefile.in: Regenerate. * configure: Likewise. * testsuite/Makefile.in: Likewise. * testsuite/lib/libatomic.exp (libatomic_init): If '--with-build-sysroot=[...]' was specified, use it for build-tree testing. * testsuite/libatomic-site-extra.exp.in (GCC_UNDER_TEST): Don't set. (SYSROOT_CFLAGS_FOR_TARGET): Set.
2023-10-24Daily bump.GCC Administrator1-0/+5
2023-10-23libatomic: drop redundant all-multi commandJan Beulich2-4/+2
./multilib.am already specifies this same command, and make warns about the earlier one being ignored when seeing the later one. All that needs retaining to still satisfy the preceding comment is the extra dependency. libatomic/ * Makefile.am (all-multi): Drop commands. * Makefile.in: Update accordingly.
2023-10-23Daily bump.GCC Administrator1-0/+11
2023-10-22Testsuite: allow non-installed testing on darwinIain Sandoe1-2/+6
DYLD_LIBRARY_PATH is now removed from the environment for all system tools, including the shell. Adapt the testsuite and pass the right options to allow testing, even when the compiler and libraries have not been installed. gcc/ChangeLog: * Makefile.in: set ENABLE_DARWIN_AT_RPATH in site.tmp. gcc/testsuite/ChangeLog: * gfortran.dg/coarray/caf.exp: Correctly set libatomic flags. * gfortran.dg/dg.exp: Likewise. * lib/asan-dg.exp: Set correct -B flags. * lib/atomic-dg.exp: Likewise. * lib/target-libpath.exp: Handle ENABLE_DARWIN_AT_RPATH. libatomic/ChangeLog: * testsuite/lib/libatomic.exp: Pass correct flags on darwin. libffi/ChangeLog: * testsuite/lib/libffi.exp: Likewise. libitm/ChangeLog: * testsuite/lib/libitm.exp: Likewise. * testsuite/libitm.c++/c++.exp: Likewise.
2023-10-22Config,Darwin: Allow for configuring Darwin to use embedded runpath.Iain Sandoe4-7/+85
Recent Darwin versions place contraints on the use of run paths specified in environment variables. This breaks some assumptions in the GCC build. This change allows the user to configure a Darwin build to use '@rpath/libraryname.dylib' in library names and then to add an embedded runpath to executables (and libraries with dependents). The embedded runpath is added by default unless the user adds '-nodefaultrpaths' to the link line. For an installed compiler, it means that any executable built with that compiler will reference the runtimes installed with the compiler (equivalent to hard-coding the library path into the name of the library). During build-time configurations any "-B" entries will be added to the runpath thus the newly-built libraries will be found by exes. Since the install name is set in libtool, that decision needs to be available here (but might also cause dependent ones in Makefiles, so we need to export a conditional). This facility is not available for Darwin 8 or earlier, however the existing environment variable runpath does work there. We default this on for systems where the external DYLD_LIBRARY_PATH does not work and off for Darwin 8 or earlier. For systems that can use either method, if the value is unset, we use the default (which is currently DYLD_LIBRARY_PATH). ChangeLog: * configure: Regenerate. * configure.ac: Do not add default runpaths to GCC exes when we are building -static-libstdc++/-static-libgcc (the default). * libtool.m4: Add 'enable-darwin-at-runpath'. Act on the enable flag to alter Darwin libraries to use @rpath names. gcc/ChangeLog: * aclocal.m4: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * config/darwin.h: Handle Darwin rpaths. * config/darwin.opt: Handle Darwin rpaths. * Makefile.in: Handle Darwin rpaths. gcc/ada/ChangeLog: * gcc-interface/Makefile.in: Handle Darwin rpaths. gcc/jit/ChangeLog: * Make-lang.in: Handle Darwin rpaths. libatomic/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libbacktrace/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. libgcc/ChangeLog: * config/t-slibgcc-darwin: Generate libgcc_s with an @rpath name. * config.host: Handle Darwin rpaths. libgfortran/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths libgm2/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * libm2cor/Makefile.am: Handle Darwin rpaths. * libm2cor/Makefile.in: Regenerate. * libm2iso/Makefile.am: Handle Darwin rpaths. * libm2iso/Makefile.in: Regenerate. * libm2log/Makefile.am: Handle Darwin rpaths. * libm2log/Makefile.in: Regenerate. * libm2min/Makefile.am: Handle Darwin rpaths. * libm2min/Makefile.in: Regenerate. * libm2pim/Makefile.am: Handle Darwin rpaths. * libm2pim/Makefile.in: Regenerate. libgomp/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths libitm/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libobjc/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libphobos/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * libdruntime/Makefile.am: Handle Darwin rpaths. * libdruntime/Makefile.in: Regenerate. * src/Makefile.am: Handle Darwin rpaths. * src/Makefile.in: Regenerate. libquadmath/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libsanitizer/ChangeLog: * asan/Makefile.am: Handle Darwin rpaths. * asan/Makefile.in: Regenerate. * configure: Regenerate. * hwasan/Makefile.am: Handle Darwin rpaths. * hwasan/Makefile.in: Regenerate. * lsan/Makefile.am: Handle Darwin rpaths. * lsan/Makefile.in: Regenerate. * tsan/Makefile.am: Handle Darwin rpaths. * tsan/Makefile.in: Regenerate. * ubsan/Makefile.am: Handle Darwin rpaths. * ubsan/Makefile.in: Regenerate. libssp/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libstdc++-v3/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * src/Makefile.am: Handle Darwin rpaths. * src/Makefile.in: Regenerate. libvtv/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. lto-plugin/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. zlib/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths.
2023-08-08Daily bump.GCC Administrator1-0/+24
2023-08-07libtool.m4: augment symcode for Solaris 11Nick Alcock1-1/+1
This reports common symbols like GNU nm, via a type code of 'C'. ChangeLog: * libtool.m4 (lt_cv_sys_global_symbol_pipe): Augment symcode for Solaris 11. gcc/ChangeLog: * configure: Regenerate. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgm2/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. libphobos/ChangeLog: * configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2023-08-07Add support for the haiku operating systemAlexander von Gluck IV1-1/+1
These are the os support patches we have been grooming and maintaining for quite a few years over on git.haiku-os.org. All of these architectures are working and most have been stable for quite some time. ChangeLog: * configure: Regenerate. * configure.ac: Add Haiku to list of ELF OSes * libtool.m4: Update sys_lib_dlsearch_path_spec on Haiku. gcc/ChangeLog: * configure: Regenerate. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgm2/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. libphobos/ChangeLog: * configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2023-08-07libtool.m4: fix the NM="/nm/over/here -B/option/with/path" caseNick Alcock1-7/+13
My previous nm patch handled all cases but one -- if the user set NM in the environment to a path which contained an option, libtool's nm detection tries to run nm against a copy of nm with the options in it: e.g. if NM was set to "nm --blargle", and nm was found in /usr/bin, the test would try to run "/usr/bin/nm --blargle /usr/bin/nm --blargle". This is unlikely to be desirable: in this case we should run "/usr/bin/nm --blargle /usr/bin/nm". Furthermore, as part of this nm has to detect when the passed-in $NM contains a path, and in that case avoid doing a path search itself. This too was thrown off if an option contained something that looked like a path, e.g. NM="nm -B../prev-gcc"; libtool then tries to run "nm -B../prev-gcc nm" which rarely works well (and indeed it looks to see whether that nm exists, finds it doesn't, and wrongly concludes that nm -p or whatever does not work). Fix all of these by clipping all options (defined as everything including and after the first " -") before deciding whether nm contains a path (but not using the clipped value for anything else), and then removing all options from the path-modified nm before looking to see whether that nm existed. NM=my-nm now does a path search and runs e.g. /usr/bin/my-nm -B /usr/bin/my-nm NM=/usr/bin/my-nm now avoids a path search and runs e.g. /usr/bin/my-nm -B /usr/bin/my-nm NM="my-nm -p../wombat" now does a path search and runs e.g. /usr/bin/my-nm -p../wombat -B /usr/bin/my-nm NM="../prev-binutils/new-nm -B../prev-gcc" now avoids a path search: ../prev-binutils/my-nm -B../prev-gcc -B ../prev-binutils/my-nm This seems to be all combinations, including those used by GCC bootstrap (which, before this commit, fails to bootstrap when configured --with-build-config=bootstrap-lto, because the lto plugin is now using --export-symbols-regex, which requires libtool to find a working nm, while also using -B../prev-gcc to point at the lto plugin associated with the GCC just built.) Regenerate all affected configure scripts. ChangeLog: * libtool.m4 (LT_PATH_NM): Handle user-specified NM with options, including options containing paths. gcc/ChangeLog: * configure: Regenerate. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgm2/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. libphobos/ChangeLog: * configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2023-08-07libtool.m4: fix nm BSD flag detectionNick Alcock1-44/+45
Libtool needs to get BSD-format (or MS-format) output out of the system nm, so that it can scan generated object files for symbol names for -export-symbols-regex support. Some nms need specific flags to turn on BSD-formatted output, so libtool checks for this in its AC_PATH_NM. Unfortunately the code to do this has a pair of interlocking flaws: - it runs the test by doing an nm of /dev/null. Some platforms reasonably refuse to do an nm on a device file, but before now this has only been worked around by assuming that the error message has a specific textual form emitted by Tru64 nm, and that getting this error means this is Tru64 nm and that nm -B would work to produce BSD-format output, even though the test never actually got anything but an error message out of nm -B. This is fixable by nm'ing *nm itself* (since we necessarily have a path to it). - the test is entirely skipped if NM is set in the environment, on the grounds that the user has overridden the test: but the user cannot reasonably be expected to know that libtool wants not only nm but also flags forcing BSD-format output. Worse yet, one such "user" is the top-level Cygnus configure script, which neither tests for nor specifies any BSD-format flags. So platforms needing BSD-format flags always fail to set them when run in a Cygnus tree, breaking -export-symbols-regex on such platforms. Libtool also needs to augment $LD on some platforms, but this is done unconditionally, augmenting whatever the user specified: the nm check should do the same. One wrinkle: if the user has overridden $NM, a path might have been provided: so we use the user-specified path if there was one, and otherwise do the path search as usual. (If the nm specified doesn't work, this might lead to a few extra pointless path searches -- but the test is going to fail anyway, so that's not a problem.) (Tested with NM unset, and set to nm, /usr/bin/nm, my-nm where my-nm is a symlink to /usr/bin/nm on the PATH, and /not-on-the-path/my-nm where *that* is a symlink to /usr/bin/nm.) ChangeLog: * libtool.m4 (LT_PATH_NM): Try BSDization flags with a user-provided NM, if there is one. Run nm on itself, not on /dev/null, to avoid errors from nms that refuse to work on non-regular files. Remove other workarounds for this problem. Strip out blank lines from the nm output. fixincludes/ChangeLog: * configure: Regenerate. gcc/ChangeLog: * configure: Regenerate. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgm2/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. libphobos/ChangeLog: * configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2023-08-07GCC: Check if AR works with --plugin and rcH.J. Lu1-3/+11
AR from older binutils doesn't work with --plugin and rc: [hjl@gnu-cfl-2 bin]$ touch foo.c [hjl@gnu-cfl-2 bin]$ ar --plugin /usr/libexec/gcc/x86_64-redhat-linux/10/liblto_plugin.so rc libfoo.a foo.c [hjl@gnu-cfl-2 bin]$ ./ar --plugin /usr/libexec/gcc/x86_64-redhat-linux/10/liblto_plugin.so rc libfoo.a foo.c ./ar: no operation specified [hjl@gnu-cfl-2 bin]$ ./ar --version GNU ar (Linux/GNU Binutils) 2.29.51.0.1.20180112 Copyright (C) 2018 Free Software Foundation, Inc. This program is free software; you may redistribute it under the terms of the GNU General Public License version 3 or (at your option) any later version. This program has absolutely no warranty. [hjl@gnu-cfl-2 bin]$ Check if AR works with --plugin and rc before passing --plugin to AR and RANLIB. ChangeLog: * configure: Regenerated. * libtool.m4 (_LT_CMD_OLD_ARCHIVE): Check if AR works with --plugin and rc before enabling --plugin. config/ChangeLog: * gcc-plugin.m4 (GCC_PLUGIN_OPTION): Check if AR works with --plugin and rc before enabling --plugin. gcc/ChangeLog: * configure: Regenerate. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgm2/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libiberty/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. libphobos/ChangeLog: * configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2023-08-07Sync with binutils: GCC: Pass --plugin to AR and RANLIBH.J. Lu1-2/+25
Sync with binutils for building binutils with LTO: 50ad1254d50 GCC: Pass --plugin to AR and RANLIB Detect GCC LTO plugin. Pass --plugin to AR and RANLIB to support LTO build. ChangeLog: * Makefile.tpl (AR): Add @AR_PLUGIN_OPTION@ (RANLIB): Add @RANLIB_PLUGIN_OPTION@. * configure.ac: Include config/gcc-plugin.m4. AC_SUBST AR_PLUGIN_OPTION and RANLIB_PLUGIN_OPTION. * libtool.m4 (_LT_CMD_OLD_ARCHIVE): Pass --plugin to AR and RANLIB if possible. * Makefile.in: Regenerated. * configure: Likewise. config/ChangeLog: * gcc-plugin.m4 (GCC_PLUGIN_OPTION): New. libiberty/ChangeLog: * Makefile.in (AR): Add @AR_PLUGIN_OPTION@ (RANLIB): Add @RANLIB_PLUGIN_OPTION@. (configure_deps): Depend on ../config/gcc-plugin.m4. * configure.ac: AC_SUBST AR_PLUGIN_OPTION and RANLIB_PLUGIN_OPTION. * aclocal.m4: Regenerated. * configure: Likewise. zlib/ChangeLog: * configure: Regenerated. gcc/ChangeLog: * configure: Regenerate. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgm2/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. libphobos/ChangeLog: * configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate.
2023-06-11Daily bump.GCC Administrator1-0/+4
2023-06-10libatomic: x86_64: Always try ifuncXi Ruoyao1-3/+1
We used to skip ifunc check when CX16 is available. But now we use CX16+AVX+Intel/AMD for the "perfect" 16b load implementation, so CX16 alone is not a sufficient reason not to use ifunc (see PR104688). This causes a subtle and annoying issue: when GCC is built with a higher -march= setting in CFLAGS_FOR_TARGET, ifunc is disabled and the worst (locked) implementation of __atomic_load_16 is always used. There seems no good way to check if the CPU is Intel or AMD from the built-in macros (maybe we can check every known model like __skylake, __bdver2, ..., but it will be very error-prune and require an update whenever we add the support for a new x86 model). The best thing we can do seems "always try ifunc" here. libatomic/ChangeLog: * configure.tgt: For x86_64, always set try_ifunc=yes.
2023-06-03Daily bump.GCC Administrator1-0/+7
2023-06-02Remove stale Autoconf checks for PerlThomas Schwinge4-47/+2
Subversion r110220 (Git commit 03b8fe495d716c004f5491eb2347537f115ab2d8) for PR25884 "libgomp should not require perl to compile" removed all '$(PERL)' usage from libgomp -- but didn't remove the then-unused Autoconf Perl check itself. Later, this Autoconf Perl check appears to have been copied from libgomp into other GCC libraries, likewise unused. libgomp/ * configure.ac (PERL): Remove. * configure: Regenerate. * Makefile.in: Likewise. * testsuite/Makefile.in: Likewise. libatomic/ * configure.ac (PERL): Remove. * configure: Regenerate. * Makefile.in: Likewise. * testsuite/Makefile.in: Likewise. libgm2/ * configure.ac (PERL): Remove. * configure: Regenerate. * Makefile.in: Likewise. * libm2cor/Makefile.in: Likewise. * libm2iso/Makefile.in: Likewise. * libm2log/Makefile.in: Likewise. * libm2min/Makefile.in: Likewise. * libm2pim/Makefile.in: Likewise. libitm/ * configure.ac (PERL): Remove. * configure: Regenerate. * Makefile.in: Likewise. * testsuite/Makefile.in: Likewise.
2023-03-25Daily bump.GCC Administrator1-0/+6
2023-03-24libatomic: Fix SEQ_CST 128-bit atomic load [PR108891]Wilco Dijkstra1-74/+115
The LSE2 ifunc for 16-byte atomic load requires a barrier before the LDP - without it, it effectively has Load-AcquirePC semantics similar to LDAPR, which is less restrictive than what __ATOMIC_SEQ_CST requires. This patch fixes this and adds comments to make it easier to see which sequence is used for each case. Use a load/store exclusive loop for store to simplify testing memory ordering is correct (it is slightly faster too). libatomic/ PR libgcc/108891 * config/linux/aarch64/atomic_16.S: Fix libat_load_16_i1. Add comments describing the memory order.
2023-03-04Daily bump.GCC Administrator1-0/+6
2023-03-03s390: libatomic: Fix 16 byte atomic {cas,load,store}Stefan Schulze Frielinghaus3-0/+176
This is a follow-up to commit a4c6bd0821099f6b8c0f64a96ffd9d01a025c413 introducing a runtime check for alignment for 16 byte atomic compare-exchange, load, and store. libatomic/ChangeLog: * config/s390/cas_n.c: New file. * config/s390/load_n.c: New file. * config/s390/store_n.c: New file.
2023-01-17Daily bump.GCC Administrator1-0/+5
2023-01-16Update copyright years.Jakub Jelinek43-43/+43
2023-01-16libatomic: Use config/mingw/lock.c for --enable-threads=singleJonathan Wakely1-1/+1
Without this change bootstrap fails for x86_64-w64-mingw32 with --disable-threads=single because there is no lock.c file chosen by libatomic's configure. libatomic/ChangeLog: * configure.tgt (config_path) [target_thread_file=single]: Use 'mingw' config.
2023-01-08Daily bump.GCC Administrator1-0/+6
2023-01-07Always define `WIN32_LEAN_AND_MEAN` before <windows.h>LIU Hao1-0/+1
Recently, mingw-w64 has got updated <msxml.h> from Wine which is included indirectly by <windows.h> if `WIN32_LEAN_AND_MEAN` is not defined. The `IXMLDOMDocument` class has a member function named `abort()`, which gets affected by our `abort()` macro in "system.h". `WIN32_LEAN_AND_MEAN` should, nevertheless, always be defined. This can exclude 'APIs such as Cryptography, DDE, RPC, Shell, and Windows Sockets' [1], and speed up compilation of these files a bit. [1] https://learn.microsoft.com/en-us/windows/win32/winprog/using-the-windows-headers gcc/ PR middle-end/108300 * config/xtensa/xtensa-dynconfig.c: Define `WIN32_LEAN_AND_MEAN` before <windows.h>. * diagnostic-color.cc: Likewise. * plugin.cc: Likewise. * prefix.cc: Likewise. gcc/ada/ PR middle-end/108300 * adaint.c: Define `WIN32_LEAN_AND_MEAN` before `#include <windows.h>`. * cio.c: Likewise. * ctrl_c.c: Likewise. * expect.c: Likewise. * gsocket.h: Likewise. * mingw32.h: Likewise. * mkdir.c: Likewise. * rtfinal.c: Likewise. * rtinit.c: Likewise. * seh_init.c: Likewise. * sysdep.c: Likewise. * terminals.c: Likewise. * tracebak.c: Likewise. gcc/jit/ PR middle-end/108300 * jit-w32.h: Define `WIN32_LEAN_AND_MEAN` before <windows.h>. libatomic/ PR middle-end/108300 * config/mingw/lock.c: Define `WIN32_LEAN_AND_MEAN` before <windows.h>. libffi/ PR middle-end/108300 * src/aarch64/ffi.c: Define `WIN32_LEAN_AND_MEAN` before <windows.h>. libgcc/ PR middle-end/108300 * config/i386/enable-execute-stack-mingw32.c: Define `WIN32_LEAN_AND_MEAN` before <windows.h>. * libgcc2.c: Likewise. * unwind-generic.h: Likewise. libgfortran/ PR middle-end/108300 * intrinsics/sleep.c: Define `WIN32_LEAN_AND_MEAN` before <windows.h>. libgomp/ PR middle-end/108300 * config/mingw32/proc.c: Define `WIN32_LEAN_AND_MEAN` before <windows.h>. libiberty/ PR middle-end/108300 * make-temp-file.c: Define `WIN32_LEAN_AND_MEAN` before <windows.h>. * pex-win32.c: Likewise. libssp/ PR middle-end/108300 * ssp.c: Define `WIN32_LEAN_AND_MEAN` before <windows.h>. libstdc++-v3/ PR middle-end/108300 * src/c++11/system_error.cc: Define `WIN32_LEAN_AND_MEAN` before <windows.h>. * src/c++11/thread.cc: Likewise. * src/c++17/fs_ops.cc: Likewise. * src/filesystem/ops.cc: Likewise. libvtv/ PR middle-end/108300 * vtv_malloc.cc: Define `WIN32_LEAN_AND_MEAN` before <windows.h>. * vtv_rts.cc: Likewise. * vtv_utils.cc: Likewise.
2023-01-02Update Copyright year in ChangeLog filesJakub Jelinek1-1/+1
2022 -> 2023
2022-11-17Daily bump.GCC Administrator1-0/+4
2022-11-16libatomic: regenerate Makefile.inMartin Liska1-1/+0
libatomic/ChangeLog: * Makefile.in: Re-generate.
2022-11-16Daily bump.GCC Administrator1-0/+11
2022-11-15libatomic: Add support for LSE and LSE2Wilco Dijkstra5-18/+527
Add support for AArch64 LSE and LSE2 to libatomic. Disable outline atomics, and use LSE ifuncs for 1-8 byte atomics and LSE2 ifuncs for 16-byte atomics. On Neoverse V1, 16-byte atomics are ~4x faster due to avoiding locks. Note this is safe since we swap all 16-byte atomics using the same ifunc, so they either use locks or LSE2 atomics, but never a mix. This also improves ABI compatibility with LLVM: its inlined 16-byte atomics are compatible with the new libatomic if LSE2 is supported. libatomic/ * Makefile.in: Regenerated with automake 1.15.1. * Makefile.am: Add atomic_16.S for AArch64. * configure.tgt: Disable outline atomics in AArch64 build. * config/linux/aarch64/atomic_16.S: New file - implementation of ifuncs for 16-byte atomics. * config/linux/aarch64/host-config.h: Enable ifuncs, use LSE (HWCAP_ATOMICS) for 1-8-byte atomics and LSE2 (HWCAP_USCAT) for 16-byte atomics.
2022-11-15Daily bump.GCC Administrator1-0/+6
2022-11-15libatomic: Handle AVX+CX16 AMD like Intel for 16b atomics [PR104688]Jakub Jelinek1-2/+4
We got a response from AMD in https://gcc.gnu.org/bugzilla/show_bug.cgi?id=104688#c10 so the following patch starts treating AMD with AVX and CMPXCHG16B ISAs like Intel by using vmovdqa for atomic load/store in libatomic. We still don't have confirmation from Zhaoxin and VIA (anything else with CPUs featuring AVX and CX16?). 2022-11-15 Jakub Jelinek <jakub@redhat.com> PR target/104688 * config/x86/init.c (__libat_feat1_init): Don't clear bit_AVX on AMD CPUs.
2022-10-20Daily bump.GCC Administrator1-0/+4
2022-10-19gcc: Add 'mcf' thread model support from mcfgthreadLIU Hao1-1/+1
This patch adds the new thread model `mcf`, which implements mutexes and condition variables with the mcfgthread library. Source code for mcfgthread is available at <https://github.com/lhmouse/mcfgthread>. config/ChangeLog: * gthr.m4 (GCC_AC_THREAD_HEADER): Add new case for `mcf` thread model gcc/ChangeLog: * config/i386/mingw-mcfgthread.h: New file * config/i386/mingw32.h: Add builtin macro and default libraries for mcfgthread when thread model is `mcf` * config.gcc: Include 'i386/mingw-mcfgthread.h' when thread model is `mcf` * configure.ac: Recognize `mcf` as a valid thread model * config.in: Regenerate * configure: Regenerate libatomic/ChangeLog: * configure.tgt: Add new case for `mcf` thread model libgcc/ChangeLog: * config.host: Add new cases for `mcf` thread model * config/i386/gthr-mcf.h: New file * config/i386/t-mingw-mcfgthread: New file * config/i386/t-slibgcc-cygming: Add mcfgthread for libgcc DLL * configure: Regenerate libstdc++-v3/ChangeLog: * libsupc++/atexit_thread.cc (__cxa_thread_atexit): Use implementation from mcfgthread if available * libsupc++/guard.cc (__cxa_guard_acquire, __cxa_guard_release, __cxa_guard_abort): Use implementations from mcfgthread if available * configure: Regenerate
2022-10-13Daily bump.GCC Administrator1-0/+4
2022-10-12regenerate configure filesMartin Liska1-2/+2
Needed after a recent change. gcc/ChangeLog: * configure: Regenerate. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. liboffloadmic/ChangeLog: * configure: Regenerate. * plugin/configure: Regenerate. libphobos/ChangeLog: * configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2022-10-12Daily bump.GCC Administrator1-0/+5
2022-10-11Generic configury support for shared libs on VxWorksOlivier Hainque1-0/+24
This change adds the configury bits to activate the build of shared libs on VxWorks ports configured with --enable-shared, for libraries variants where this is generally supported (rtp, code model !large - currently not compatible with -fPIC). Set lt_cv_deplibs_check_method in libtool.m4, so the build of libraries know how to establish dependencies. This is useful in configurations such as aarch64 where proper support of LSE relies on accurate dependency information between libstdc++ and libgcc_s to begin with. Regenerate configure scripts to reflect libtool.m4 change. 2022-10-09 Olivier Hainque <hainque@adacore.com> * libtool.m4 (*vxworks*): When enable_shared, set dynamic_linker and friends for rtp !large. Assume the linker has the required abilities and set lt_cv_deplibs_check_method. gcc/ * config.gcc (*vxworks*): Add t-slibgcc fragment if enable_shared. libgcc/ * config.host (*vxworks*): When enable_shared, add libgcc and crtstuff "shared" fragments for rtp except large code model. (aarch64*-wrs-vxworks7*): Remove t-slibgcc-libgcc from the list of fragments. 2022-10-09 Olivier Hainque <hainque@adacore.com> gcc/ * configure: Regenerate. libatomic/ * configure: Regenerate. libbacktrace/ * configure: Regenerate. libcc1/ * configure: Regenerate. libffi/ * configure: Regenerate. libgfortran/ * configure: Regenerate. libgomp/ * configure: Regenerate. libitm/ * configure: Regenerate. libobjc/ * configure: Regenerate. liboffloadmic/ * configure: Regenerate. liboffloadmic/ * plugin/configure: Regenerate. libphobos/ * configure: Regenerate. libquadmath/ * configure: Regenerate. libsanitizer/ * configure: Regenerate. libssp/ * configure: Regenerate. libstdc++-v3/ * configure: Regenerate. libvtv/ * configure: Regenerate. lto-plugin/ * configure: Regenerate. zlib/ * configure: Regenerate.
2022-08-31Daily bump.GCC Administrator1-0/+4
2022-08-30automake: regenerateMartin Liska1-0/+1
gotools/ChangeLog: * Makefile.in: Regenerate. libatomic/ChangeLog: * testsuite/Makefile.in: Regenerate.
2022-08-09Daily bump.GCC Administrator1-0/+12
2022-08-08AArch32: Fix 128-bit sequential consistency atomic operations.Tamar Christina1-0/+19
Similar to AArch64 the Arm implementation of 128-bit atomics is broken. For 128-bit atomics we rely on pthread barriers to correct guard the address in the pointer to get correct memory ordering. However for 128-bit atomics the address under the lock is different from the original pointer. This means that one of the values under the atomic operation is not protected properly and so we fail during when the user has requested sequential consistency as there's no barrier to enforce this requirement. As such users have resorted to adding an #ifdef GCC <emit barrier> #endif around the use of these atomics. This corrects the issue by issuing a barrier only when __ATOMIC_SEQ_CST was requested. I have hand verified that the barriers are inserted for atomic seq cst. libatomic/ChangeLog: PR target/102218 * config/arm/host-config.h (pre_seq_barrier, post_seq_barrier, pre_post_seq_barrier): Require barrier on __ATOMIC_SEQ_CST.
2022-08-08AArch64: Fix 128-bit sequential consistency atomic operations.Tamar Christina2-0/+69
The AArch64 implementation of 128-bit atomics is broken. For 128-bit atomics we rely on pthread barriers to correct guard the address in the pointer to get correct memory ordering. However for 128-bit atomics the address under the lock is different from the original pointer. This means that one of the values under the atomic operation is not protected properly and so we fail during when the user has requested sequential consistency as there's no barrier to enforce this requirement. As such users have resorted to adding an #ifdef GCC <emit barrier> #endif around the use of these atomics. This corrects the issue by issuing a barrier only when __ATOMIC_SEQ_CST was requested. To remedy this performance hit I think we should revisit using a similar approach to out-line-atomics for the 128-bit atomics. Note that I believe I need the empty file due to the include_next chain but I am not entirely sure. I have hand verified that the barriers are inserted for atomic seq cst. libatomic/ChangeLog: PR target/102218 * config/aarch64/aarch64-config.h: New file. * config/aarch64/host-config.h: New file.
2022-06-03Daily bump.GCC Administrator1-0/+4
2022-06-02diagnostics: add SARIF output formatDavid Malcolm1-0/+1
This patch adds support to gcc's diagnostic subsystem for emitting diagnostics in SARIF, aka the Static Analysis Results Interchange Format: https://sarifweb.azurewebsites.net/ by extending -fdiagnostics-format= to add two new options: -fdiagnostics-format=sarif-stderr and: -fdiagnostics-format=sarif-file The patch targets SARIF v2.1.0 This is a JSON-based format suited for capturing the results of static analysis tools (like GCC's -fanalyzer), but it can also be used for plain GCC warnings and errors. SARIF supports per-event metadata in diagnostic paths such as ["acquire", "resource"] and ["release", "lock"] (specifically, the threadFlowLocation "kinds" property: SARIF v2.1.0 section 3.38.8), so the patch extends GCC"s diagnostic_event subclass with a "struct meaning" with similar purpose. The patch implements this for -fanalyzer so that the various state-machine-based warnings set these in the SARIF output. The heart of the implementation is in the new file diagnostic-format-sarif.cc. Much of the rest of the patch is interface classes, isolating the diagnostic subsystem (which has no knowledge of e.g. tree or langhook) from the "client" code in the compiler proper cc1 etc). The patch adds a langhook for specifying the SARIF v2.1.0 "artifact.sourceLanguage" property, based on the list in SARIF v2.1.0 Appendix J. The patch adds automated DejaGnu tests to our testsuite via new scan-sarif-file and scan-sarif-file-not directives (although these merely use regexps, rather than attempting to use a proper JSON parser). I've tested the patch by hand using the validator at: https://sarifweb.azurewebsites.net/Validation and the react-based viewer at: https://microsoft.github.io/sarif-web-component/ which successfully shows most of the information (although not paths, and not CWE IDs), and I've fixed all validation errors I've seen (though bugs no doubt remain). I've also tested the generated SARIF using the VS Code extension linked to from the SARIF website; I'm a novice with VS Code, but it seems to be able to handle my generated SARIF files (e.g. showing the data in the SARIF tab, and showing squiggly underlines under issues, and when I click on them, it visualizes the events in the path inline within the source window). Has anyone written an Emacs mode for SARIF files? (pretty please) gcc/ChangeLog: * Makefile.in (OBJS): Add tree-diagnostic-client-data-hooks.o and tree-logical-location.o. (OBJS-libcommon): Add diagnostic-format-sarif.o; reorder. (CFLAGS-tree-diagnostic-client-data-hooks.o): Add TARGET_NAME. * common.opt (fdiagnostics-format=): Add sarif-stderr and sarif-file. (sarif-stderr, sarif-file): New enum values. * diagnostic-client-data-hooks.h: New file. * diagnostic-format-sarif.cc: New file. * diagnostic-path.h (enum diagnostic_event::verb): New enum. (enum diagnostic_event::noun): New enum. (enum diagnostic_event::property): New enum. (struct diagnostic_event::meaning): New struct. (diagnostic_event::get_logical_location): New vfunc. (diagnostic_event::get_meaning): New vfunc. (simple_diagnostic_event::get_logical_location): New vfunc impl. (simple_diagnostic_event::get_meaning): New vfunc impl. * diagnostic.cc: Include "diagnostic-client-data-hooks.h". (diagnostic_initialize): Initialize m_client_data_hooks. (diagnostic_finish): Clean up m_client_data_hooks. (diagnostic_event::meaning::dump_to_pp): New. (diagnostic_event::meaning::maybe_get_verb_str): New. (diagnostic_event::meaning::maybe_get_noun_str): New. (diagnostic_event::meaning::maybe_get_property_str): New. (get_cwe_url): Make non-static. (diagnostic_output_format_init): Handle DIAGNOSTICS_OUTPUT_FORMAT_SARIF_STDERR and DIAGNOSTICS_OUTPUT_FORMAT_SARIF_FILE. * diagnostic.h (enum diagnostics_output_format): Add DIAGNOSTICS_OUTPUT_FORMAT_SARIF_STDERR and DIAGNOSTICS_OUTPUT_FORMAT_SARIF_FILE. (class diagnostic_client_data_hooks): New forward decl. (class logical_location): New forward decl. (diagnostic_context::m_client_data_hooks): New field. (diagnostic_output_format_init_sarif_stderr): New decl. (diagnostic_output_format_init_sarif_file): New decl. (get_cwe_url): New decl. * doc/invoke.texi (-fdiagnostics-format=): Add sarif-stderr and sarif-file. * doc/sourcebuild.texi (Scan a particular file): Add scan-sarif-file and scan-sarif-file-not. * langhooks-def.h (lhd_get_sarif_source_language): New decl. (LANG_HOOKS_GET_SARIF_SOURCE_LANGUAGE): New macro. (LANG_HOOKS_INITIALIZER): Add LANG_HOOKS_GET_SARIF_SOURCE_LANGUAGE. * langhooks.cc (lhd_get_sarif_source_language): New. * langhooks.h (lang_hooks::get_sarif_source_language): New field. * logical-location.h: New file. * plugin.cc (struct for_each_plugin_closure): New. (for_each_plugin_cb): New. (for_each_plugin): New. * plugin.h (for_each_plugin): New decl. * tree-diagnostic-client-data-hooks.cc: New file. * tree-diagnostic.cc: Include "diagnostic-client-data-hooks.h". (tree_diagnostics_defaults): Populate m_client_data_hooks. * tree-logical-location.cc: New file. * tree-logical-location.h: New file. gcc/ada/ChangeLog: * gcc-interface/misc.cc (gnat_get_sarif_source_language): New. (LANG_HOOKS_GET_SARIF_SOURCE_LANGUAGE): Redefine. gcc/analyzer/ChangeLog: * checker-path.cc (checker_event::get_meaning): New. (function_entry_event::get_meaning): New. (state_change_event::get_desc): Add dump of meaning of the event to the -fanalyzer-verbose-state-changes output. (state_change_event::get_meaning): New. (cfg_edge_event::get_meaning): New. (call_event::get_meaning): New. (return_event::get_meaning): New. (start_consolidated_cfg_edges_event::get_meaning): New. (warning_event::get_meaning): New. * checker-path.h: Include "tree-logical-location.h". (checker_event::checker_event): Construct m_logical_loc. (checker_event::get_logical_location): New. (checker_event::get_meaning): New decl. (checker_event::m_logical_loc): New. (function_entry_event::get_meaning): New decl. (state_change_event::get_meaning): New decl. (cfg_edge_event::get_meaning): New decl. (call_event::get_meaning): New decl. (return_event::get_meaning): New decl. (start_consolidated_cfg_edges_event::get_meaning): New. (warning_event::get_meaning): New decl. * pending-diagnostic.h: Include "diagnostic-path.h". (pending_diagnostic::get_meaning_for_state_change): New vfunc. * sm-file.cc (file_diagnostic::get_meaning_for_state_change): New vfunc impl. * sm-malloc.cc (malloc_diagnostic::get_meaning_for_state_change): Likewise. * sm-sensitive.cc (exposure_through_output_file::get_meaning_for_state_change): Likewise. * sm-taint.cc (taint_diagnostic::get_meaning_for_state_change): Likewise. * varargs.cc (va_list_sm_diagnostic::get_meaning_for_state_change): Likewise. gcc/c/ChangeLog: * c-lang.cc (LANG_HOOKS_GET_SARIF_SOURCE_LANGUAGE): Redefine. (c_get_sarif_source_language): New. * c-tree.h (c_get_sarif_source_language): New decl. gcc/cp/ChangeLog: * cp-lang.cc (LANG_HOOKS_GET_SARIF_SOURCE_LANGUAGE): Redefine. (cp_get_sarif_source_language): New. gcc/d/ChangeLog: * d-lang.cc (d_get_sarif_source_language): New. (LANG_HOOKS_GET_SARIF_SOURCE_LANGUAGE): Redefine. gcc/fortran/ChangeLog: * f95-lang.cc (gfc_get_sarif_source_language): New. (LANG_HOOKS_GET_SARIF_SOURCE_LANGUAGE): Redefine. gcc/go/ChangeLog: * go-lang.cc (go_get_sarif_source_language): New. (LANG_HOOKS_GET_SARIF_SOURCE_LANGUAGE): Redefine. gcc/objc/ChangeLog: * objc-act.h (objc_get_sarif_source_language): New decl. * objc-lang.cc (LANG_HOOKS_GET_SARIF_SOURCE_LANGUAGE): Redefine. (objc_get_sarif_source_language): New. gcc/testsuite/ChangeLog: * c-c++-common/diagnostic-format-sarif-file-1.c: New test. * c-c++-common/diagnostic-format-sarif-file-2.c: New test. * c-c++-common/diagnostic-format-sarif-file-3.c: New test. * c-c++-common/diagnostic-format-sarif-file-4.c: New test. * gcc.dg/analyzer/file-meaning-1.c: New test. * gcc.dg/analyzer/malloc-meaning-1.c: New test. * gcc.dg/analyzer/malloc-sarif-1.c: New test. * gcc.dg/plugin/analyzer_gil_plugin.c (gil_diagnostic::get_meaning_for_state_change): New vfunc impl. * gcc.dg/plugin/diagnostic-test-paths-5.c: New test. * gcc.dg/plugin/plugin.exp (plugin_test_list): Add diagnostic-test-paths-5.c to tests for diagnostic_plugin_test_paths.c. * lib/gcc-dg.exp: Load scansarif.exp. * lib/scansarif.exp: New test. libatomic/ChangeLog: * testsuite/lib/libatomic.exp: Add load_gcc_lib of scansarif.exp. libgomp/ChangeLog: * testsuite/lib/libgomp.exp: Add load_gcc_lib of scansarif.exp. libitm/ChangeLog: * testsuite/lib/libitm.exp: Add load_gcc_lib of scansarif.exp. libphobos/ChangeLog: * testsuite/lib/libphobos-dg.exp: Add load_gcc_lib of scansarif.exp. Signed-off-by: David Malcolm <dmalcolm@redhat.com>
2022-03-25Daily bump.GCC Administrator1-0/+5
generated by cgit v1.1 at 2024-10-01 03:44:37 +0000