| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Previously we've been allowing that comma only in C++ when in attribute
form (which was the reason why it has been allowed), but 5.1 allows that
even in pragma form in C/C++ (with clarifications in 5.2) and 5.2
also in Fortran (which this patch doesn't implement).
Note, for directives which take an argument (== unnamed clause),
comma is not allowed in between the directive name and the argument,
like the directive-1.c testcase shows.
2022-10-28 Jakub Jelinek <jakub@redhat.com>
gcc/c/
* c-parser.cc (c_parser_omp_all_clauses): Allow optional
comma before the first clause.
(c_parser_omp_allocate, c_parser_omp_atomic, c_parser_omp_depobj,
c_parser_omp_flush, c_parser_omp_scan_loop_body,
c_parser_omp_ordered, c_finish_omp_declare_variant,
c_parser_omp_declare_target, c_parser_omp_declare_reduction,
c_parser_omp_requires, c_parser_omp_error,
c_parser_omp_assumption_clauses): Likewise.
gcc/cp/
* parser.cc (cp_parser_omp_all_clauses): Allow optional comma
before the first clause even in pragma syntax.
(cp_parser_omp_allocate, cp_parser_omp_atomic, cp_parser_omp_depobj,
cp_parser_omp_flush, cp_parser_omp_scan_loop_body,
cp_parser_omp_ordered, cp_parser_omp_assumption_clauses,
cp_finish_omp_declare_variant, cp_parser_omp_declare_target,
cp_parser_omp_declare_reduction_exprs, cp_parser_omp_requires,
cp_parser_omp_error): Likewise.
gcc/testsuite/
* c-c++-common/gomp/directive-1.c: New test.
* c-c++-common/gomp/clauses-6.c: New test.
* c-c++-common/gomp/declare-variant-2.c (f75a): Declare.
(f75): Use f75a as variant instead of f1 and don't expect error.
* g++.dg/gomp/clause-4.C (foo): Don't expect error on comma
before first clause.
* gcc.dg/gomp/clause-2.c (foo): Likewise.
|
|
The following adjusts the testcase to require no epilogue also
for larger vectors than V4SI.
* gcc.dg/vect/pr100756.c: Adjust for larger vectors.
|
|
This patch prevents compiler-generated artificial variables from being
treated as privatization candidates for OpenACC.
The rationale is that e.g. "gang-private" variables actually must be
shared by each worker and vector spawned within a particular gang, but
that sharing is not necessary for any compiler-generated variable (at
least at present, but no such need is anticipated either). Variables on
the stack (and machine registers) are already private per-"thread"
(gang, worker and/or vector), and that's fine for artificial variables.
We're restricting this to blocks, as we still need to understand what it
means for a 'DECL_ARTIFICIAL' to appear in a 'private' clause.
Several tests need their scan output patterns adjusted to compensate.
2022-10-14 Julian Brown <julian@codesourcery.com>
PR middle-end/90115
gcc/
* omp-low.cc (oacc_privatization_candidate_p): Artificial vars are not
privatization candidates.
libgomp/
* testsuite/libgomp.oacc-fortran/declare-1.f90: Adjust scan output.
* testsuite/libgomp.oacc-fortran/host_data-5.F90: Likewise.
* testsuite/libgomp.oacc-fortran/if-1.f90: Likewise.
* testsuite/libgomp.oacc-fortran/print-1.f90: Likewise.
* testsuite/libgomp.oacc-fortran/privatized-ref-2.f90: Likewise.
Co-authored-by: Thomas Schwinge <thomas@codesourcery.com>
|
|
... to restore testing lost in recent
commit r13-3225-gbd9a05594d227cde79a67dc715bd9d82e9c464e9
"amdgcn: vector testsuite tweaks" (for example, x86_64-pc-linux-gnu):
PASS: gcc.dg/vect/bb-slp-cond-1.c (test for excess errors)
PASS: gcc.dg/vect/bb-slp-cond-1.c -flto -ffat-lto-objects scan-tree-dump vect "(no need for alias check [^\\n]* when VF is 1|no alias between [^\\n]* when [^\\n]* is outside \\(-16, 16\\))"
[-PASS: gcc.dg/vect/bb-slp-cond-1.c -flto -ffat-lto-objects scan-tree-dump-times vect "loop vectorized" 1-]
PASS: gcc.dg/vect/bb-slp-cond-1.c -flto -ffat-lto-objects (test for excess errors)
PASS: gcc.dg/vect/bb-slp-cond-1.c -flto -ffat-lto-objects execution test
PASS: gcc.dg/vect/bb-slp-cond-1.c execution test
PASS: gcc.dg/vect/bb-slp-cond-1.c scan-tree-dump vect "(no need for alias check [^\\n]* when VF is 1|no alias between [^\\n]* when [^\\n]* is outside \\(-16, 16\\))"
[-PASS: gcc.dg/vect/bb-slp-cond-1.c scan-tree-dump-times vect "loop vectorized" 1-]
gcc/testsuite/
* gcc.dg/vect/bb-slp-cond-1.c: Fix target selector syntax.
|
|
PR sanitizer/107298
gcc/ChangeLog:
* doc/invoke.texi: Document sanitizers can trigger warnings.
|
|
gcc/lto/ChangeLog:
* lto-dump.cc (dump_list): Remove trailing return.
(dump_symbol): Likewise.
(dump_body): Filter name based on mangled name.
(dump_tool_help): Use GIMPLE wording.
(lto_main): Update wording.
|
|
Refer to 'Makefile.tpl':
# Rules to wipe a stage and all the following ones, also used for cleanstrap
[+ IF prev +]distclean-stage[+prev+]:: distclean-stage[+id+] [+ ENDIF prev +]
.PHONY: distclean-stage[+id+]
distclean-stage[+id+]::
@: $(MAKE); $(stage)
@test "`cat stage_last`" != stage[+id+] || rm -f stage_last
rm -rf stage[+id+]-* [+
IF compare-target +][+compare-target+] [+ ENDIF compare-target +]
gcc/
* doc/makefile.texi (Makefile Targets): Document
'distclean-stage[N]'.
|
|
gcc/ChangeLog:
* value-range.cc (range_tests_floats): Use HONOR_INFINITIES.
|
|
[PR107240]
The test cases vect-bitfield-read-* requires vector shift
target support, they need one explicit vect_shift effective
target requirement checking. Besides, the vectype for struct
in test cases vect-bitfield-read-{2,4} is vector of long long,
we need to check effective target vect_long_long for them.
This patch can help to fix all remaining vect-bitfield-{read,
write}-* test failures on powerpc.
PR testsuite/107240
gcc/testsuite/ChangeLog:
* gcc.dg/vect/vect-bitfield-read-1.c: Add effective target checking
vect_shift.
* gcc.dg/vect/vect-bitfield-read-3.c: Likewise.
* gcc.dg/vect/vect-bitfield-read-5.c: Likewise.
* gcc.dg/vect/vect-bitfield-read-6.c: Likewise.
* gcc.dg/vect/vect-bitfield-read-7.c: Likewise.
* gcc.dg/vect/vect-bitfield-read-2.c: Add effective target checking
vect_shift and replace vect_int with vect_long_long.
* gcc.dg/vect/vect-bitfield-read-4.c: Likewise.
|
|
C2x adds support for enums with a fixed underlying type specified
("enum e : long long;" and similar). Implement this in the C front
end. The same representation is used for these types as in C++, with
two macros moved from cp-tree.h to c-common.h.
Such enums can have bool as the underlying type, and various C
front-end code checking for boolean types is adjusted to use a new
C_BOOLEAN_TYPE_P to handle such enums the same way as bool. (Note
that for C++ we have bug 96496 that enums with underlying type bool
don't work correctly there.)
There are various issues with the wording for such enums in the
current C2x working draft (including but not limited to wording in the
accepted paper that failed to make it into the working draft), which I
intend to raise in NB comments. I think what I've implemented and
added tests for matches the intent.
Bootstrapped with no regressions for x86_64-pc-linux-gnu.
PR c/61469
gcc/c-family/
* c-common.h (ENUM_UNDERLYING_TYPE, ENUM_FIXED_UNDERLYING_TYPE_P):
New. Moved from cp/cp-tree.h.
* c-warn.cc (warnings_for_convert_and_check): Do not consider
conversions to enum with underlying type bool to overflow.
gcc/c/
* c-convert.cc (c_convert): Handle enums with underlying boolean
type like bool.
* c-decl.cc (shadow_tag_warned): Allow shadowing declarations for
enums with enum type specifier, but give errors for storage class
specifiers, qualifiers or alignment specifiers in non-definition
declarations of such enums.
(grokdeclarator): Give error for non-definition use of type
specifier with an enum type specifier.
(parser_xref_tag): Add argument has_enum_type_specifier. Pass it
to lookup_tag and use it to set ENUM_FIXED_UNDERLYING_TYPE_P.
(xref_tag): Update call to parser_xref_tag.
(start_enum): Add argument fixed_underlying_type. Complete enum
type with a fixed underlying type given in the definition. Give
error for defining without a fixed underlying type in the
definition if one was given in a prior declaration. Do not mark
enums with fixed underlying type as packed for -fshort-enums.
Store the enum type in the_enum.
(finish_enum): Do not adjust types of values or check their range
for an enum with a fixed underlying type. Set underlying type of
enum and variants.
(build_enumerator): Check enumeration constants for enum with
fixed underlying type against that type and convert to that type.
Increment in the underlying integer type, with handling for bool.
(c_simulate_enum_decl): Update call to start_enum.
(declspecs_add_type): Set specs->enum_type_specifier_ref_p.
* c-objc-common.cc (c_get_alias_set): Use ENUM_UNDERLYING_TYPE
rather than recomputing an underlying type based on size.
* c-parser.cc (c_parser_declspecs)
(c_parser_struct_or_union_specifier, c_parser_typeof_specifier):
Set has_enum_type_specifier for type specifiers.
(c_parser_enum_specifier): Handle enum type specifiers.
(c_parser_struct_or_union_specifier): Update call to
parser_xref_tag.
(c_parser_omp_atomic): Check for boolean increment or decrement
using C_BOOLEAN_TYPE_P.
* c-tree.h (C_BOOLEAN_TYPE_P): New.
(struct c_typespec): Add has_enum_type_specifier.
(struct c_declspecs): Add enum_type_specifier_ref_p.
(struct c_enum_contents): Add enum_type.
(start_enum, parser_xref_tag): Update prototypes.
* c-typeck.cc (composite_type): Allow for enumerated types
compatible with bool.
(common_type, comptypes_internal, perform_integral_promotions):
Use ENUM_UNDERLYING_TYPE.
(parser_build_binary_op, build_unary_op, convert_for_assignment)
(c_finish_return, c_start_switch, build_binary_op): Check for
boolean types using C_BOOLEAN_TYPE_P.
gcc/cp/
* cp-tree.h (ENUM_FIXED_UNDERLYING_TYPE_P, ENUM_UNDERLYING_TYPE):
Remove. Moved to c-common.h.
gcc/testsuite/
* gcc.dg/c11-enum-4.c, gcc.dg/c11-enum-5.c, gcc.dg/c11-enum-6.c,
gcc.dg/c2x-enum-6.c, gcc.dg/c2x-enum-7.c, gcc.dg/c2x-enum-8.c,
gcc.dg/gnu2x-enum-1.c: New tests.
|
|
|
|
The last argument to the C mmap function is type off_t, not uintptr.
On some 32-bit systems, off_t is larger than uintptr.
Based on patch by Sören Tempel.
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/445735
|
|
The setting looks obsolete at this point.
gcc/
* config/aarch64/aarch64.h (DONT_USE_BUILTIN_SETJMP): Delete.
|
|
In i386.md, neg patterns which set MODE_CC register like
(set (reg:CCC FLAGS_REG)
(ne:CCC (match_operand:SWI48 1 "general_reg_operand") (const_int 0)))
can lead to errors when operand 1 is a constant value. If FLAGS_REG in
(set (reg:CCC FLAGS_REG)
(ne:CCC (const_int 2) (const_int 0)))
is set to 1, RTX simplifiers may simplify
(set (reg:SI 93)
(neg:SI (ltu:SI (reg:CCC 17 flags) (const_int 0 [0]))))
as
(set (reg:SI 93)
(neg:SI (ltu:SI (const_int 1) (const_int 0 [0]))))
which leads to incorrect results since LTU on MODE_CC register isn't the
same as "unsigned less than" in x86 backend. To prevent RTL optimizers
from setting MODE_CC register to a constant, use UNSPEC_CC_NE to replace
ne:CCC/ne:CCO when setting FLAGS_REG in neg patterns.
gcc/
PR target/107172
* config/i386/i386.md (UNSPEC_CC_NE): New.
Replace ne:CCC/ne:CCO with UNSPEC_CC_NE in neg patterns.
gcc/testsuite/
PR target/107172
* gcc.target/i386/pr107172.c: New test.
|
|
This is a simple patch to do some DCE after a successful
match and simplify replacement in PHI-OPT. match and simplify
likes to generate some extra statements which should be cleaned
up.
OK? Bootstrapped and tested on x86_64-linux with no regressions.
Thanks,
Andrew Pinski
gcc/ChangeLog:
* tree-ssa-phiopt.cc: Include tree-ssa-dce.h
(replace_phi_edge_with_variable):
New argument, dce_ssa_names. Call simple_dce_from_worklist.
(match_simplify_replacement): If we inserted a sequence,
mark the lhs of the new sequence to be possible dce.
Always move the statement and mark the lhs (if it is a name)
as possible to remove.
|
|
As mentioned in the PR, apparently my r13-2887 P1467R9 changes
regressed these tests on powerpc64le-linux with IEEE quad by default.
I believe my changes just uncovered a latent bug.
The problem is that push_namespace calls find_namespace_slot,
which does:
tree *slot = DECL_NAMESPACE_BINDINGS (ns)
->find_slot_with_hash (name, name ? IDENTIFIER_HASH_VALUE (name) : 0,
create_p ? INSERT : NO_INSERT);
In the <identifier_node 0x7fffe9f55ac0 details> ns case, slot is non-NULL
above with a binding_vector in it.
Then pushdecl is called and this does:
slot = find_namespace_slot (ns, name, ns == current_namespace);
where ns == current_namespace (ns is :: and name is details) is true.
So this again calls
tree *slot = DECL_NAMESPACE_BINDINGS (ns)
->find_slot_with_hash (name, name ? IDENTIFIER_HASH_VALUE (name) : 0,
create_p ? INSERT : NO_INSERT);
but this time with create_p and so INSERT.
At this point we reach
if (insert == INSERT && m_size * 3 <= m_n_elements * 4)
expand ();
and when we are unlucky and the occupancy of the hash table just reached 3/4,
expand () is called and the hash table is reallocated. But when that happens,
it means the slot pointer in the pushdecl caller (push_namespace) points to
freed memory and so any accesses to it in make_namespace_finish will be UB.
The following patch fixes it by calling find_namespace_slot again even if it
was non-NULL, just doesn't assert it is *slot == ns in that case (because
it often is not).
2022-10-27 Jakub Jelinek <jakub@redhat.com>
PR c++/107379
* name-lookup.cc (push_namespace): Call find_namespace_slot again
after pushdecl as the hash table might be expanded during pushdecl.
|
|
(Explicitly) Templated lambdas have a different signature to
implicitly templated lambdas -- '[]<template T> (T) {}' is not the
same as '[](auto) {}'. This should be reflected in the mangling. The
ABI captures this as
https://github.com/itanium-cxx-abi/cxx-abi/issues/31, and clang has
implemented such additions.
It's relatively straight forwards to write out the non-synthetic
template parms, and note if we need to issue an ABI warning.
gcc/cp/
* mangle.cc (write_closure_template_head): New.
(write_closure_type_name): Call it.
gcc/testsuite/
* g++.dg/abi/lambda-ctx1-18.C: Adjust.
* g++.dg/abi/lambda-ctx1-18vs17.C: Adjust.
* g++.dg/abi/lambda-tpl1-17.C: New.
* g++.dg/abi/lambda-tpl1-18.C: New.
* g++.dg/abi/lambda-tpl1-18vs17.C: New.
* g++.dg/abi/lambda-tpl1.h: New.
|
|
In 9482a5e4eac8d696129ec2854b331e1bb5dbab42 I'd replaced uses
of CONSTEXPR with direct uses of constexpr. However, it turns
out that we still have CONSTEXPR for a reason: GCC 4.8 doesn't
implement constexpr properly, and for example rejects things like:
extern const int x;
constexpr int x = 1;
This patch partially reverts the previous one. To make things
more complicated, there are still some things that need to be
constexpr rather than CONSTEXPR, since they are used to initialise
scalar constants. The patch therefore doesn't change anything
in aarch64-feature-deps.h.
gcc/
* config/aarch64/aarch64-protos.h: Replace constexpr with
CONSTEXPR.
* config/aarch64/aarch64-sve-builtins-base.cc: Likewise.
* config/aarch64/aarch64-sve-builtins-functions.h: Likewise.
* config/aarch64/aarch64-sve-builtins-shapes.cc: Likewise.
* config/aarch64/aarch64-sve-builtins-sve2.cc: Likewise.
* config/aarch64/aarch64-sve-builtins.cc: Likewise.
* config/aarch64/aarch64.cc: Likewise.
* config/aarch64/driver-aarch64.cc: Likewise
|
|
The problem here is that we're inlining a global range with NANs into
a function that has been tagged with __attribute__((optimize
("-ffinite-math-only"))). As the global range is copied from
SSA_NAME_RANGE_INFO, its NAN bits are copied, which then cause
frange::verify_range() to fail a sanity check making sure no NANs
creep in when !HONOR_NANS.
I think what we should do is nuke the NAN bits as we're restoring the
global range. For that matter, if we use the frange constructor,
everything except that NAN sign will be done automatically, including
dropping INFs to the min/max representable range when appropriate.
PR tree-optimization/107394
gcc/ChangeLog:
* value-range-storage.cc (frange_storage_slot::get_frange): Use
frange constructor.
gcc/testsuite/ChangeLog:
* gcc.dg/tree-ssa/pr107394.c: New test.
|
|
This clarifies commit 95db7e9afe57ca1c269d46baa2accced004e5c74
"options, lto: Optimize streaming of optimization nodes".
No functional change; no change in generated files.
gcc/
* optc-save-gen.awk: Clarify 'Init' option property usage for
streaming optimization.
|
|
PR lto/107418
gcc/lto/ChangeLog:
* lto-dump.cc (lto_main): Do not load LTO stream for aliases.
|
|
The following tests ICE in the gcc_assert (common); in cp_build_binary_op.
I've missed that while for * common is set always, while for +, - and /
it is in some cases not.
If it is not, then
if (!result_type
&& arithmetic_types_p
&& (shorten || common || short_compare))
condition is false, then the following
if (may_need_excess_precision
&& (orig_type0 != type0 || orig_type1 != type1)
&& build_type == NULL_TREE)
would fail the assertion there and if there wouldn't be excess precision,
if (code == SPACESHIP_EXPR)
would be false (for SPACESHIP_EXPR we always have build_type set like for
other comparisons) and then trigger
if (!result_type)
{
if (complain & tf_error)
{
binary_op_rich_location richloc (location,
orig_op0, orig_op1, true);
error_at (&richloc,
"invalid operands of types %qT and %qT to binary %qO",
TREE_TYPE (orig_op0), TREE_TYPE (orig_op1), code);
}
return error_mark_node;
}
So, if result_type is NULL, we don't really need to compute
semantic_result_type because nothing will use it anyway and can get
fall through into the error/return error_mark_node; case.
2022-10-27 Jakub Jelinek <jakub@redhat.com>
PR c++/107382
PR c++/107383
* typeck.cc (cp_build_binary_op): Don't compute semantic_result_type
if result_type is NULL.
* g++.dg/diagnostic/bad-binary-ops2.C: New test.
|
|
In commit 081c96621da, the call to resize_reg_info() was moved before
the call to remove_scratches() and the latter one can increase the
number of regs and that would cause an out of bounds usage on the
reg_renumber global array.
Without this patch, the following testcase randomly fails with:
during RTL pass: ira
In file included from /src/gcc/testsuite/gcc.dg/compat/struct-by-value-5b_y.c:13:
/src/gcc/testsuite/gcc.dg/compat/struct-by-value-5b_y.c: In function 'checkgSf13':
/src/gcc/testsuite/gcc.dg/compat/fp-struct-test-by-value-y.h:28:1: internal compiler error: Segmentation fault
/src/gcc/testsuite/gcc.dg/compat/struct-by-value-5b_y.c:22:1: note: in expansion of macro 'TEST'
gcc/ChangeLog:
* ira.cc: Resize array after reg number increased.
Co-Authored-By: Yvan ROUX <yvan.roux@foss.st.com>
Signed-off-by: Torbjörn SVENSSON <torbjorn.svensson@foss.st.com>
|
|
Test zhinx/zhinxmin support, same like with zfh/zfhmin testcases
but use gprs and don't use fmv instruction.
gcc/testsuite/ChangeLog:
* gcc.target/riscv/_Float16-zhinx-1.c: New test.
* gcc.target/riscv/_Float16-zhinx-2.c: New test.
* gcc.target/riscv/_Float16-zhinx-3.c: New test.
* gcc.target/riscv/_Float16-zhinxmin-1.c: New test.
* gcc.target/riscv/_Float16-zhinxmin-2.c: New test.
* gcc.target/riscv/_Float16-zhinxmin-3.c: New test.
|
|
Limit z*inx abi support with 'ilp32','ilp32e','lp64' only.
Use GPR instead FPR when 'zfinx' enable, Only use even registers
in RV32 when 'zdinx' enable.
Enable FLOAT16 when Zhinx/Zhinxmin enabled.
Co-Authored-By: Sinan Lin <sinan@isrc.iscas.ac.cn>
gcc/ChangeLog:
* config/riscv/constraints.md (TARGET_ZFINX ? GR_REGS): Set GPRS
use while Zfinx is enable.
* config/riscv/riscv.cc (riscv_hard_regno_mode_ok): Limit odd
registers use when Zdinx enable in RV32 cases.
(riscv_option_override): New target enable MASK_FDIV.
(riscv_libgcc_floating_mode_supported_p): New error info when
use incompatible arch&abi.
(riscv_excess_precision): New target enable FLOAT16.
|
|
Support 'TARGET_ZFINX' with float instruction pattern and builtin function.
Reuse 'TARGET_HADR_FLOAT', 'TARGET_DOUBLE_FLOAT' and 'TARGET_ZHINX' patterns.
gcc/ChangeLog:
* config/riscv/iterators.md (TARGET_ZFINX):New target.
(TARGET_ZDINX): Ditto.
(TARGET_ZHINX): Ditto.
* config/riscv/riscv-builtins.cc (AVAIL): Ditto.
(riscv_atomic_assign_expand_fenv): Ditto.
* config/riscv/riscv-c.cc (riscv_cpu_cpp_builtins): Ditto.
* config/riscv/riscv.md: Ditto.
|
|
Minimal support of z*inx extension, include 'zfinx'， 'zdinx' and 'zhinx/zhinxmin'
corresponding to 'f', 'd' and 'zfh/zfhmin', the 'zdinx' will imply 'zfinx'
same as 'd' imply 'f', 'zhinx' will aslo imply 'zfinx', all zfinx extension imply 'zicsr'.
Co-Authored-By: Sinan Lin <sinan@isrc.iscas.ac.cn>
gcc/ChangeLog:
* common/config/riscv/riscv-common.cc: New extensions.
* config/riscv/arch-canonicalize: New imply relations.
* config/riscv/riscv-opts.h (MASK_ZFINX): New mask.
(MASK_ZDINX): Ditto.
(MASK_ZHINX): Ditto.
(MASK_ZHINXMIN): Ditto.
(TARGET_ZFINX): New target.
(TARGET_ZDINX): Ditto.
(TARGET_ZHINX): Ditto.
(TARGET_ZHINXMIN): Ditto.
* config/riscv/riscv.opt: New target variable.
|
|
|
|
gcc/analyzer/ChangeLog:
* sm-fd.cc (fd_state_machine::on_open): Transition to "unchecked"
when the mode is symbolic, rather than just on integer constants.
(fd_state_machine::check_for_open_fd): Don't complain about
unchecked values in the start state.
gcc/testsuite/ChangeLog:
* gcc.dg/analyzer/fd-3.c (test_5): Expect "opened here" message
even when flags are symbolic.
(test_read_from_symbolic_fd): New.
(test_write_to_symbolic_fd): New.
Signed-off-by: David Malcolm <dmalcolm@redhat.com>
|
|
Add a .dot file to document the file descriptor state machine.
gcc/analyzer/ChangeLog:
* sm-fd.dot: New file.
Signed-off-by: David Malcolm <dmalcolm@redhat.com>
|
|
gcc/fortran/ChangeLog:
PR fortran/103413
* symbol.cc (gfc_type_compatible): A boz-literal-constant has no type
and thus is not considered compatible to any type.
gcc/testsuite/ChangeLog:
PR fortran/103413
* gfortran.dg/illegal_boz_arg_4.f90: New test.
|
|
Add BPF __builtin_preserve_field_info. This builtin is used to extract
information to facilitate struct and union relocations performed by the
BPF loader, especially for bitfields.
The builtin has the following signature:
unsigned int __builtin_preserve_field_info (EXPR, unsigned int KIND);
Where EXPR is an expression accessing a field of a struct or union.
Depending on KIND, different information is returned to the program. The
supported values for KIND are as follows:
enum {
FIELD_BYTE_OFFSET = 0,
FIELD_BYTE_SIZE,
FIELD_EXISTENCE,
FIELD_SIGNEDNESS,
FIELD_LSHIFT_U64,
FIELD_RSHIFT_U64
};
If -mco-re is in effect (explicitly or implicitly specified), a CO-RE
relocation is added for the access in EXPR recording the relevant
information according to KIND.
gcc/
* config/bpf/bpf.cc: Support __builtin_preserve_field_info.
(enum bpf_builtins): Add new builtin.
(bpf_init_builtins): Likewise.
(bpf_core_field_info): New function.
(bpf_expand_builtin): Accomodate new builtin. Refactor adding new
relocation to...
(maybe_make_core_relo): ... here. New function.
(bpf_resolve_overloaded_builtin): Accomodate new builtin.
(bpf_core_newdecl): Likewise.
(bpf_core_walk): Likewise.
(bpf_core_is_maybe_aggregate_access): Improve logic.
(struct core_walk_data): New.
* config/bpf/coreout.cc (bpf_core_reloc_add): Allow adding different
relocation kinds.
* config/bpf/coreout.h: Analogous change.
* doc/extend.texi: Document BPF __builtin_preserve_field_info.
gcc/testsuite/
* gcc.target/bpf/core-builtin-fieldinfo-errors-1.c: New test.
* gcc.target/bpf/core-builtin-fieldinfo-errors-2.c: New test.
* gcc.target/bpf/core-builtin-fieldinfo-existence-1.c: New test.
* gcc.target/bpf/core-builtin-fieldinfo-lshift-1-be.c: New test.
* gcc.target/bpf/core-builtin-fieldinfo-lshift-1-le.c: New test.
* gcc.target/bpf/core-builtin-fieldinfo-lshift-2.c: New test.
* gcc.target/bpf/core-builtin-fieldinfo-offset-1.c: New test.
* gcc.target/bpf/core-builtin-fieldinfo-rshift-1.c: New test.
* gcc.target/bpf/core-builtin-fieldinfo-rshift-2.c: New test.
* gcc.target/bpf/core-builtin-fieldinfo-sign-1.c: New test.
* gcc.target/bpf/core-builtin-fieldinfo-sign-2.c: New test.
* gcc.target/bpf/core-builtin-fieldinfo-size-1.c: New test.
|
|
This patch implements a new experimental warning (enabled by -Wall) to
detect references bound to temporaries whose lifetime has ended. The
primary motivation is the Note in
<https://en.cppreference.com/w/cpp/algorithm/max>:
Capturing the result of std::max by reference produces a dangling reference
if one of the parameters is a temporary and that parameter is returned:
int n = 1;
const int& r = std::max(n-1, n+1); // r is dangling
That's because both temporaries for n-1 and n+1 are destroyed at the end
of the full expression. With this warning enabled, you'll get:
g.C:3:12: warning: possibly dangling reference to a temporary [-Wdangling-reference]
3 | const int& r = std::max(n-1, n+1);
| ^
g.C:3:24: note: the temporary was destroyed at the end of the full expression 'std::max<int>((n - 1), (n + 1))'
3 | const int& r = std::max(n-1, n+1);
| ~~~~~~~~^~~~~~~~~~
The warning works by checking if a reference is initialized with a function
that returns a reference, and at least one parameter of the function is
a reference that is bound to a temporary. It assumes that such a function
actually returns one of its arguments! (I added code to check_return_expr
to suppress the warning when we've seen the definition of the function
and we can say that it can return a variable with static storage
duration.)
It warns when the function in question is a member function, but only if
the function is invoked on a temporary object, otherwise the warning
would emit loads of warnings for valid code like obj.emplace<T>({0}, 0).
It does detect the dangling reference in:
struct S {
const S& self () { return *this; }
};
const S& s = S().self();
It warns in member initializer lists as well:
const int& f(const int& i) { return i; }
struct S {
const int &r;
S() : r(f(10)) { }
};
I've run the testsuite/bootstrap with the warning enabled by default.
There were just a few FAILs, all of which look like genuine bugs.
A bootstrap with the warning enabled by default passed as well.
When testing a previous version of the patch, there were many FAILs in
libstdc++'s 22_locale/; all of them because the warning triggered on
const test_type& obj = std::use_facet<test_type>(std::locale());
but this code looks valid -- std::use_facet doesn't return a reference
to its parameter. Therefore I added a #pragma and code to suppress the
warning.
PR c++/106393
gcc/c-family/ChangeLog:
* c.opt (Wdangling-reference): New.
gcc/cp/ChangeLog:
* call.cc (expr_represents_temporary_p): New, factored out of...
(conv_binds_ref_to_temporary): ...here. Don't return false just
because a ck_base is missing. Use expr_represents_temporary_p.
(do_warn_dangling_reference): New.
(maybe_warn_dangling_reference): New.
(extend_ref_init_temps): Call maybe_warn_dangling_reference.
* cp-tree.h: Adjust comment.
* typeck.cc (check_return_expr): Suppress -Wdangling-reference
warnings.
gcc/ChangeLog:
* doc/invoke.texi: Document -Wdangling-reference.
libstdc++-v3/ChangeLog:
* include/bits/locale_classes.tcc: Add #pragma to disable
-Wdangling-reference with std::use_facet.
gcc/testsuite/ChangeLog:
* g++.dg/cpp23/elision4.C: Use -Wdangling-reference, add dg-warning.
* g++.dg/cpp23/elision7.C: Likewise.
* g++.dg/warn/Wdangling-pointer-2.C: Use -Wno-dangling-reference.
* g++.dg/warn/Wdangling-reference1.C: New test.
* g++.dg/warn/Wdangling-reference2.C: New test.
* g++.dg/warn/Wdangling-reference3.C: New test.
|
|
The following new warnings were introduced in the commit
4f3f0296acbb ("xtensa: Prepare the transition from Reload to LRA"):
gcc/config/xtensa/xtensa.md:945:26: error: array subscript 3 is above
array bounds of 'rtx_def* [2]' [-Werror=array-bounds]
945 | emit_move_insn (operands[2], operands[3]);
gcc/config/xtensa/xtensa.md:945:26: error: array subscript 2 is above
array bounds of 'rtx_def* [2]' [-Werror=array-bounds]
945 | emit_move_insn (operands[2], operands[3]);
From gcc/insn-emit.cc (generated by building):
> /* ../../gcc/config/xtensa/xtensa.md:932 */
> rtx
> gen_movdi (rtx operand0,
> rtx operand1)
> {
> rtx_insn *_val = 0;
> start_sequence ();
> {
> rtx operands[2]; // only 2 elements
> operands[0] = operand0;
> operands[1] = operand1;
> #define FAIL return (end_sequence (), _val)
> #define DONE return (_val = get_insns (), end_sequence (), _val)
> #line 936 "../../gcc/config/xtensa/xtensa.md"
> {
> if (CONSTANT_P (operands[1]))
> {
> /* Split in halves if 64-bit Const-to-Reg moves
> because of offering further optimization opportunities. */
> if (register_operand (operands[0], DImode))
> {
> xtensa_split_DI_reg_imm (operands); // out-of-bounds!
> emit_move_insn (operands[0], operands[1]);
> emit_move_insn (operands[2], operands[3]); // out-of-bounds!
> DONE;
> }
gcc/ChangeLog:
* config/xtensa/xtensa.md (movdi):
Copy operands[0...1] to ops[0...3] and then use the latter before
calling xtensa_split_DI_reg_imm() and emitting insns.
|
|
When upgrading TLS access model based on optimized symbol visibility
status, we attempted to assert that recomputing the model would not
weaken it. It turns out that C, C++, and Fortran front-ends all can
(unintentionally) assign a stronger model than what can be derived
from the declaration.
Let's act conservatively instead of asserting, at least as long as
such pre-existing issues remain.
gcc/ChangeLog:
PR other/107353
* ipa-visibility.cc (function_and_variable_visibility):
Conditionally upgrade TLS model instead of asserting.
|
|
When using strict enums, we can sometimes turn varying into a better
range.
* gimple-range-fold.cc (fold_using_range::fold_stmt): Check if
stmt is non-negative and adjust the range.
|
|
gcc/ChangeLog:
* common/config/i386/cpuinfo.h (has_cpu_feature): Add comment.
(reset_cpu_feature): New.
(get_zhaoxin_cpu): Use reset_cpu_feature.
|
|
I noticed that I have made a mistake in previous patch:
https://patchwork.sourceware.org/project/gcc/patch/20220817071950.271762-1-juzhe.zhong@rivai.ai/
The previous statement before this patch:
bool need_barrier_p = (get_frame_size () + cfun->machine->frame.arg_pointer_offset) != 0;
However, I changed it in the previous patch:
bool need_barrier_p = known_ne (get_frame_size (), cfun->machine->frame.arg_pointer_offset);
This is incorrect.
Now, I correct this statement in this patch.
gcc/ChangeLog:
* config/riscv/riscv.cc (riscv_expand_epilogue): Fix statement.
|
|
This patch fixed PR107357: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=107357
gcc/ChangeLog:
PR target/107357
* config/riscv/riscv-modes.def (VECTOR_BOOL_MODE): Set to minimum size.
(ADJUST_NUNITS): Adjust according to -march.
(ADJUST_BYTESIZE): Ditto.
* config/riscv/riscv-protos.h (riscv_v_ext_enabled_vector_mode_p):
Remove.
(riscv_v_ext_vector_mode_p): Change function implementation.
* config/riscv/riscv-vector-builtins.cc (rvv_switcher::rvv_switcher):
Change to riscv_v_ext_vector_mode_p.
(register_builtin_type): Ditto.
* config/riscv/riscv.cc (riscv_v_ext_vector_mode_p): Change to enabled
modes.
(ENTRY): Ditto.
(riscv_v_ext_enabled_vector_mode_p): Remove.
(riscv_v_adjust_nunits): New function.
(riscv_vector_mode_supported_p): Use riscv_v_ext_vector_mode_p instead.
* config/riscv/riscv.h (riscv_v_adjust_nunits): New function.
|
|
gcc/ChangeLog:
* config.gcc (riscv*): Add riscv-v.o to extra_objs.
* config/riscv/constraints.md (vu): New constraint.
(vi): Ditto.
(Wc0): Ditto.
(Wc1): Ditto.
* config/riscv/predicates.md (vector_length_operand): New.
(reg_or_mem_operand): Ditto.
(vector_move_operand): Ditto.
(vector_mask_operand): Ditto.
(vector_merge_operand): Ditto.
* config/riscv/riscv-protos.h (riscv_regmode_natural_size) New.
(riscv_vector::const_vec_all_same_in_range_p): Ditto.
(riscv_vector::legitimize_move): Ditto.
(tail_policy): Ditto.
(mask_policy): Ditto.
* config/riscv/riscv-v.cc: New.
* config/riscv/riscv-vector-builtins-bases.cc
(vsetvl::expand): Refactor how LMUL encoding.
* config/riscv/riscv.cc (riscv_print_operand): Update how LMUL
print and mask operand print.
(riscv_regmode_natural_size): New.
* config/riscv/riscv.h (REGMODE_NATURAL_SIZE): New.
* config/riscv/riscv.md (mode): Add vector modes.
* config/riscv/t-riscv (riscv-v.o) New.
* config/riscv/vector-iterators.md: New.
* config/riscv/vector.md (vundefined<mode>): New.
(mov<mode>): New.
(*mov<mode>): New.
(@vsetvl<mode>_no_side_effects): New.
(@pred_mov<mode>): New.
gcc/testsuite/ChangeLog:
* gcc.target/riscv/rvv/base/mov-1.c: New.
* gcc.target/riscv/rvv/base/mov-10.c: New.
* gcc.target/riscv/rvv/base/mov-11.c: New.
* gcc.target/riscv/rvv/base/mov-12.c: New.
* gcc.target/riscv/rvv/base/mov-13.c: New.
* gcc.target/riscv/rvv/base/mov-2.c: New.
* gcc.target/riscv/rvv/base/mov-3.c: New.
* gcc.target/riscv/rvv/base/mov-4.c: New.
* gcc.target/riscv/rvv/base/mov-5.c: New.
* gcc.target/riscv/rvv/base/mov-6.c: New.
* gcc.target/riscv/rvv/base/mov-7.c: New.
* gcc.target/riscv/rvv/base/mov-8.c: New.
* gcc.target/riscv/rvv/base/mov-9.c: New.
|
|
gcc/ChangeLog:
* common/config/riscv/riscv-common.cc (riscv_ext_version_table):
Add svinval and svnapot extension.
(riscv_ext_flag_table): Ditto.
* config/riscv/riscv-opts.h (MASK_SVINVAL): New.
(MASK_SVNAPOT): Ditto.
(TARGET_SVINVAL): Ditto.
(TARGET_SVNAPOT): Ditto.
* config/riscv/riscv.opt (riscv_sv_subext): New.
gcc/testsuite/ChangeLog:
* gcc.target/riscv/predef-24.c:New.
* gcc.target/riscv/predef-25.c:New.
|
|
gcc/ChangeLog:
* config/riscv/riscv-modes.def: Adjust table indentation in commnet.
|
|
gcc/ChangeLog:
* configure: Regenerate.
|
|
As mentioned earlier, we should be using HONOR_* on types rather than
flag_finite_math_only.
gcc/ChangeLog:
* value-range.cc (frange::set): Use HONOR_*.
(frange::verify_range): Same.
* value-range.h (frange_val_min): Same.
(frange_val_max): Same.
|
|
As the issue in PR106460, a rtx 'high:DI (symbol_ref:DI ("var_48")' is tried
to store into constant pool and ICE occur. But actually, this rtx represents
partial incomplete address and can not be put into a .rodata section.
This patch updates rs6000_cannot_force_const_mem to return true for rtx(s) with
HIGH code, because these rtx(s) indicate part of address and are not ok for
constant pool.
Below are some examples:
(high:DI (const:DI (plus:DI (symbol_ref:DI ("xx") (const_int 12 [0xc])))))
(high:DI (symbol_ref:DI ("var_1")..)))
PR target/106460
gcc/ChangeLog:
* config/rs6000/rs6000.cc (rs6000_cannot_force_const_mem): Return true
for HIGH code rtx.
gcc/testsuite/ChangeLog:
* gcc.target/powerpc/pr106460.c: New test.
|
|
`h` was the prefix of multi-letter extension name, but it become a
extension in later RISC-V isa spec.
Fortunately we don't have any extension really defined is prefixed
with `h`, so we can just change that.
gcc/ChangeLog:
* common/config/riscv/riscv-common.cc (riscv_ext_version_table):
Add `h`.
(riscv_supported_std_ext): Ditto.
(multi_letter_subset_rank): Remove `h`.
(riscv_subset_list::parse_std_ext): Handle `h` as single letter
extension.
(riscv_subset_list::parse): Ditto.
gcc/testsuite/ChangeLog:
* gcc.target/riscv/arch-18.c: New.
* gcc.target/riscv/arch-5.c: Remove test for prefixed
with `h`.
* gcc.target/riscv/predef-23.c: New.
|
|
Support for DWARF5 was added to create_gcov in
https://github.com/google/autofdo so we no longer need
to force DWARF4 for AutoFDO tests.
Tested on x86_64-pc-linux-gnu.
gcc/testsuite/ChangeLog:
* lib/profopt.exp: Don't force DWARF4 for AutoFDO tests
|
|
|
|
Tested on x86_64-pc-linux-gnu.
gcc/ChangeLog:
* auto-profile.cc (get_combined_location): Include discriminator in the
returned combined location.
(read_function_instance): Read discriminators from profiles.
|
|
We intend to mark synthetic template parameters (coming from use of auto
parms), as DECL_VIRTUAL_P. The API of process_template_parm is
awkwardly confusing, and we were marking the previous template parm
(unless this was the first parm). process_template_parm returns the list
of parms, when most (all?) users really want the newly-added final node.
That's a bigger change, so let's not do it right now. With this, we
correctly mark such synthetic parms DECL_VIRTUAL_P.
gcc/cp/
* parser.cc (synthesize_implicit_template_parm): Fix thinko about
mark the new parm DECL_VIRTUAL_P. Avoid unneccessary tree_last call.
|
