| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
PR rtl-optimization/26316
* rtlanal.c (enum may_trap_p_flags): New.
(may_trap_p_1): Take flags instead of unaligned_mems argument. Ignore
MEM_NOTRAP_P if flags & MTP_AFTER_MOVE.
(may_trap_p, may_trap_or_fault_p): Pass flags to may_trap_p_1.
(may_trap_after_code_motion_p): New function.
* loop-invariant.c (find_identical_invariants): Fix dump formating.
(find_invariant_insn): Use may_trap_after_code_motion_p.
* rtl.h (may_trap_after_code_motion_p): Declare.
From-SVN: r111397
|
|
* gcse.c (want_to_gcse_p): On STACK_REGS targets, look through
constant pool references to identify stack mode constants.
* rtlanal.c (constant_pool_constant_p): New predicate to check
whether operand is a floating point constant in the pool.
* rtl.h (constant_pool_constant_p): Prototype here.
* loop.c (scan_loop): Avoid hoisting constants from the constant
pool on STACK_REGS targets.
(load_mems): Likewise.
* loop-invariant.c (get_inv_cost): Make hoisting constant pool
loads into x87 registers expensive in terms of register pressure.
Co-Authored-By: Steven Bosscher <stevenb.gcc@gmail.com>
From-SVN: r111283
|
|
could be solved in less instructions)
* cselib.c (cselib_init): Change RTX_SIZE to RTX_CODE_SIZE.
* emit-rtl.c (copy_rtx_if_shared_1): Use shallow_copy_rtx.
(copy_insn_1): Likewise. Don't copy each field individually.
Reindent.
* read-rtl.c (apply_macro_to_rtx): Use RTX_CODE_SIZE instead
of RTX_SIZE.
* reload1.c (eliminate_regs): Use shallow_copy_rtx.
* rtl.c (rtx_size): Rename variable to...
(rtx_code_size): ...this.
(rtx_size): New function.
(rtx_alloc_stat): Use RTX_CODE_SIZE instead of RTX_SIZE.
(copy_rtx): Use shallow_copy_rtx. Don't copy each field individually.
Reindent.
(shallow_copy_rtx_stat): Use rtx_size instead of RTX_SIZE.
* rtl.h (rtx_code_size): New variable.
(rtx_size): Change from a variable to a function.
(RTX_SIZE): Rename to...
(RTX_CODE_SIZE): ...this.
PR target/9703
PR tree-optimization/17106
* doc/tm.texi (TARGET_USE_BLOCKS_FOR_CONSTANT_P): Document.
(Anchored Addresses): New section.
* doc/invoke.texi (-fsection-anchors): Document.
* doc/rtl.texi (SYMBOL_REF_IN_BLOCK_P, SYMBOL_FLAG_IN_BLOCK): Likewise.
(SYMBOL_REF_ANCHOR_P, SYMBOL_FLAG_ANCHOR): Likewise.
(SYMBOL_REF_BLOCK, SYMBOL_REF_BLOCK_OFFSET): Likewise.
* hooks.c (hook_bool_mode_rtx_false): New function.
* hooks.h (hook_bool_mode_rtx_false): Declare.
* gengtype.c (create_optional_field): New function.
(adjust_field_rtx_def): Add the "block_sym" field for SYMBOL_REFs when
SYMBOL_REF_IN_BLOCK_P is true.
* target.h (output_anchor, use_blocks_for_constant_p): New hooks.
(min_anchor_offset, max_anchor_offset): Likewise.
(use_anchors_for_symbol_p): New hook.
* toplev.c (compile_file): Call output_object_blocks.
(target_supports_section_anchors_p): New function.
(process_options): Check that -fsection-anchors is only used on
targets that support it and when -funit-at-a-time is in effect.
* tree-ssa-loop-ivopts.c (prepare_decl_rtl): Only create DECL_RTL
if the decl doesn't have one.
* dwarf2out.c: Remove instantiations of VEC(rtx,gc).
* expr.c (emit_move_multi_word, emit_move_insn): Pass the result
of force_const_mem through use_anchored_address.
(expand_expr_constant): New function.
(expand_expr_addr_expr_1): Call it. Use the same modifier when
calling expand_expr for INDIRECT_REF.
(expand_expr_real_1): Pass DECL_RTL through use_anchored_address
for all modifiers except EXPAND_INITIALIZER. Use expand_expr_constant.
* expr.h (use_anchored_address): Declare.
* loop-unroll.c: Don't declare rtx vectors here.
* explow.c: Include output.h.
(validize_mem): Call use_anchored_address.
(use_anchored_address): New function.
* common.opt (-fsection-anchors): New switch.
* varasm.c (object_block_htab, anchor_labelno): New variables.
(hash_section, object_block_entry_eq, object_block_entry_hash)
(use_object_blocks_p, get_block_for_section, create_block_symbol)
(use_blocks_for_decl_p, change_symbol_section): New functions.
(get_variable_section): New function, split out from assemble_variable.
(make_decl_rtl): Create a block symbol if use_object_blocks_p and
use_blocks_for_decl_p say so. Use change_symbol_section if the
symbol has already been created.
(assemble_variable_contents): New function, split out from...
(assemble_variable): ...here. Don't output any code for
block symbols; just pass them to place_block_symbol.
Use get_variable_section and assemble_variable_contents.
(get_constant_alignment, get_constant_section, get_constant_size): New
functions, split from output_constant_def_contents.
(build_constant_desc): Create a block symbol if use_object_blocks_p
says so. Or into SYMBOL_REF_FLAGS.
(assemble_constant_contents): New function, split from...
(output_constant_def_contents): ...here. Don't output any code
for block symbols; just pass them to place_section_symbol.
Use get_constant_section and get_constant_alignment.
(force_const_mem): Create a block symbol if use_object_blocks_p and
use_blocks_for_constant_p say so. Or into SYMBOL_REF_FLAGS.
(output_constant_pool_1): Add an explicit alignment argument.
Don't switch sections here.
(output_constant_pool): Adjust call to output_constant_pool_1.
Switch sections here instead. Don't output anything for block symbols;
just pass them to place_block_symbol.
(init_varasm_once): Initialize object_block_htab.
(default_encode_section_info): Keep the old SYMBOL_FLAG_IN_BLOCK.
(default_asm_output_anchor, default_use_aenchors_for_symbol_p)
(place_block_symbol, get_section_anchor, output_object_block)
(output_object_block_htab, output_object_blocks): New functions.
* target-def.h (TARGET_ASM_OUTPUT_ANCHOR): New macro.
(TARGET_ASM_OUT): Include it.
(TARGET_USE_BLOCKS_FOR_CONSTANT_P): New macro.
(TARGET_MIN_ANCHOR_OFFSET, TARGET_MAX_ANCHOR_OFFSET): New macros.
(TARGET_USE_ANCHORS_FOR_SYMBOL_P): New macro.
(TARGET_INITIALIZER): Include them.
* rtl.c (rtl_check_failed_block_symbol): New function.
* rtl.h: Include vec.h. Declare heap and gc rtx vectors.
(block_symbol, object_block): New structures.
(rtx_def): Add a block_symbol field to the union.
(BLOCK_SYMBOL_CHECK): New macro.
(rtl_check_failed_block_symbol): Declare.
(SYMBOL_FLAG_IN_BLOCK, SYMBOL_FLAG_ANCHOR): New SYMBOL_REF flags.
(SYMBOL_REF_IN_BLOCK_P, SYMBOL_REF_ANCHOR_P): New predicates.
(SYMBOL_FLAG_MACH_DEP_SHIFT): Bump by 2.
(SYMBOL_REF_BLOCK, SYMBOL_REF_BLOCK_OFFSET): New accessors.
* output.h (output_section_symbols): Declare.
(object_block): Name structure.
(place_section_symbol, get_section_anchor, default_asm_output_anchor)
(default_use_anchors_for_symbol_p): Declare.
* Makefile.in (RTL_BASE_H): Add vec.h.
(explow.o): Depend on output.h.
* config/rs6000/rs6000.c (TARGET_MIN_ANCHOR_OFFSET): Override default.
(TARGET_MAX_ANCHOR_OFFSET): Likewise.
(TARGET_USE_BLOCKS_FOR_CONSTANT_P): Likewise.
(rs6000_use_blocks_for_constant_p): New function.
From-SVN: r111254
|
|
2006-02-15 Paolo Bonzini <bonzini@gnu.org>
* cfg.c (dump_flow_info): Get dump flags as an additional parameter.
(debug_flow_info): Pass it.
* alias.c (rest_of_handle_cfg): Adjust calls to dump_flow_info.
* bb-reorder.c (reorder_basic_blocks): Likewise.
* cfgcleanup.c (rest_of_handle_jump2): Likewise.
* cse.c (rest_of_handle_cse, rest_of_handle_cse2): Likewise.
* flow.c (life_analysis, recompute_reg_usage): Likewise.
* gcse.c (gcse_main, bypass_jumps): Likewise.
* ifcvt.c (rest_of_handle_if_conversion): Likewise.
* local-alloc.c (rest_of_handle_local_alloc): Likewise.
* loop-init.c (rtl_loop_init, rtl_loop_done): Likewise.
* profile.c (compute_branch_probabilities, branch_prob): Likewise.
* rtl.h (dump_flow_info): Adjust prototype.
* tracer.c (rest_of_handle_tracer, tracer): Likewise.
* var-tracking.c (variable_tracking_main): Likewise.
* passes.c (execute_todo): Obey TDF_BLOCKS for RTL.
* tree-dump.c (enable_rtl_dump_file): Enable the details and blocks
options.
From-SVN: r111020
|
|
* tree-vrp.c (execute_vrp): Do not pass dump argument to.
loop_optimizer_init and loop_optimizer_finalize
* tree-ssa-sink.c (execute_sink_code): Ditto.
* tree-ssa-loop-ch.c (copy_loop_headers): Ditto.
* tree-ssa-loop.c (tree_loop_optimizer_init, tree_ssa_loop_init,
tree_ssa_loop_done): Ditto.
* tree-ssa-pre.c (init_pre, fini_pre): Ditto.
* sched-ebb.c: Include output.h.
(schedule_ebbs): Do not use dump argument.
* value-prof.h (struct profile_hooks): Remove profile_dump_file.
* loop.c (loop_dump_stream): Removed.
(loop_optimize, rest_of_handle_loop_optimize): Do not use dump
argument.
(scan_loop, move_movables, find_and_verify_loops, mark_loop_jump,
emit_prefetch_instructions, loop_bivs_find, loop_bivs_check,
final_biv_value, loop_biv_eliminable_p, loop_givs_rescan,
loop_iterations, strength_reduce, record_biv, record_giv,
final_giv_value, check_final_value, check_ext_dependent_givs,
combine_givs, check_dbra_loop, maybe_eliminate_biv, load_mems,
try_copy_prop, loop_delete_insns, try_swap_copy_prop): Use
dump_file instead of loop_dump_stream.
* ddg.c (print_ddg_edge, print_ddg, vcg_print_ddg): Do not call
argument dump_file.
* reorg.c (dbr_schedule, rest_of_handle_delay_slots): Do not use
dump argument.
* flow.c (life_analysis, rest_of_handle_life): Ditto.
* haifa-sched.c: Include output.h
(schedule_insns, sched_init): Do not use dump argument.
* mode-switching.c (optimize_mode_switching): Ditto.
* modulo-sched.c (stats_file): Removed.
(print_node_sched_params): Do not call argument dump_file.
(sms_schedule_by_order, loop_canon_p, sms_schedule,
rest_of_handle_sms): Do not use dump argument. Use dump_file instead
of stats_file.
* cse.c (cse_main, rest_of_handle_cse, rest_of_handle_cse2): Do not
use dump argument.
* loop-init.c (loop_optimizer_init, loop_optimizer_finalize,
rtl_loop_init, rtl_loop_done): Ditto.
* global.c (global_alloc, rest_of_handle_global_alloc): Ditto.
* predict.c (combine_predictions_for_bb, tree_estimate_probability):
Ditto.
* recog.c (peephole2_optimize, rest_of_handle_peephole2): Ditto.
* lcm.c (pre_edge_lcm, pre_edge_rev_lcm): Ditto.
* regmove.c (fixup_match_1, fixup_match_2, regmove_optimize,
rest_of_handle_regmove, rest_of_handle_stack_adjustments): Ditto.
* emit-rtl.c (renumber_insns): Ditto.
* cfgexpand.c (add_reg_br_prob_note, expand_gimple_cond_expr,
expand_gimple_basic_block, tree_expand_cfg): Ditto.
* regclass.c (regclass): Ditto.
* tree-outof-ssa.c (analyze_edges_for_bb, perform_edge_inserts,
remove_ssa_form, rewrite_out_of_ssa): Ditto.
* reg-stack.c (compensate_edge, compensate_edges, convert_regs_1,
convert_regs_2, convert_regs, reg_to_stack, rest_of_handle_stack_regs):
Ditto.
* sched-rgn.c (schedule_insns, rest_of_handle_sched): Ditto.
* local-alloc.c (rest_of_handle_local_alloc): Do not pass dump_file
to regclass.
* gcse.c (gcse_file, debug_stderr): Removed.
(gcse_main, bypass_jumps, rest_of_handle_jump_bypass,
rest_of_handle_gcse): Do not use dump argument.
(cprop_jump, cprop_insn, do_local_cprop, cprop, find_implicit_sets,
one_cprop_pass, bypass_block, compute_pre_data, insert_insn_end_bb,
pre_edge_insert, pre_insert_copy_insn, pre_delete, one_pre_gcse_pass,
compute_code_hoist_vbeinout, compute_code_hoist_data,
one_code_hoisting_pass, trim_ld_motion_mems, update_ld_motion_stores,
compute_store_table, build_store_vectors, insert_insn_start_bb,
insert_store, remove_reachable_equiv_notes, replace_store_insn,
store_motion): Use dump_file instead of gcse_file.
* ipa-type-escape.c (type_escape_execute): Remove debugging comments.
* profile.c (profile_dump_file): Removed.
(branch_prob): Use dump_file instead of profile_dump_file.
* ipa.c (cgraph_remove_unreachable_nodes): Do not call argument
dump_file.
* tree-ssa-copy.c (dump_copy_of): Ditto.
* rtl-factoring.c (rtl_seqabstr, rest_of_rtl_seqabstr): Do not pass
dump file to life_analysis.
* bt-load.c (branch_target_load_optimize): Ditto.
* cfgcleanup.c (rest_of_handle_jump2): Do not pass dump_file to
renumber_insns.
* rtl.h (cse_main, renumber_insns, schedule_insns, schedule_ebbs,
regclass, dbr_schedule): Declaration changed.
* sched-int.h (sched_init): Declaration changed.
* tree-profile.c (tree_profile_dump_file): Removed.
(tree_profile_hooks): Removed profile_dump_file hook.
* rtl-profile (rtl_profile_dump_file): Removed.
(rtl_profile_hooks): emoved profile_dump_file hook.
* cfgloop.h (loop_optimizer_init, loop_optimizer_finalize): Declaration
changed.
* c-gimplify.c (c_genericize): Do not call local variable dump_file.
* tree-cfg.c (build_tree_cfg): Ditto.
* Makefile.in (haifa-sched.o, sched-ebb.o): Add output.h dependency.
* basic-block.h (life_analysis, pre_edge_lcm, pre_edge_rev_lcm):
Declaration changed.
* config/sh/sh.c (sh_output_mi_thunk): Do not pass dump_file to
life_analysis and schedule_insns.
* config/m68hc11/m68hc11.c (m68hc11_reorg): Do not pass dump_file to
life_analysis.
* config/mt/mt.c (mt_machine_reorg): Do not pass dump_file to
dbr_schedule.
* config/mips/mips.c (mips_reorg): Ditto.
* config/ia64/ia64.c (ia64_reorg): Do not pass dump_file to
schedule_ebbs.
From-SVN: r110656
|
|
* integrate.h: Remove the prototype for
copy_decl_for_inlining.
* rtl.h: Remove the prototype for mark_constant_function.
* tree-vectorizer.h: Remove the prototype for
vect_strip_conversion.
From-SVN: r110336
|
|
* doc/rtl.texi (SYMBOL_REF_DATA): Adjust documentation for new
opaque type.
* optabs.c (init_one_libfunc): Use SET_SYMBOL_REF_DECL.
* varasm.c (make_decl_rtl, build_constant_desc): Likewise.
(force_const_mem): Use SET_SYMBOL_REF_CONSTANT.
* rtl.h (rtunion_def): Remove rt_ptr.
(X0PTR): Delete.
(SYMBOL_REF_DATA): Use X0ANY instead of X0PTR.
(SET_SYMBOL_REF_DECL, SET_SYMBOL_REF_CONSTANT): New macros.
* config/i386/winnt.c (i386_pe_mark_dllexport)
(i386_pe_mark_dllimport): Use SET_SYMBOL_REF_DECL.
From-SVN: r110300
|
|
2006-01-25 Paolo Bonzini <bonzini@gnu.org>
* Makefile.in (sched-vis.o): Update dependencies.
* haifa-sched.c (sched_finish): Clear current_sched_info.
* cfg.c (dump_bb_info): New, split from dump_flow_info.
(dump_flow_info): Call it.
* passes.c (execute_todo): Call print_rtl_slim_with_bb to make
a slim RTL dump.
* basic-block.h (dump_bb_info): Declare.
* tree-dump.c (dump_enable_all): OR the flags of a -fdump-tree-all
option, and apply options only for dump files whose TDF_RTL,
TDF_TREE, or TDF_IPA bits match.
* rtl.h: Declare new functions exported from sched-vis.c.
* sched-vis.c: Enable also if scheduling is not used.
(print_value): Print the mode of registers if not inside scheduling.
(print_insn): Make it work outside the scheduler. Beautify the output
a bit.
(dump_insn_slim, debug_insn_slim, print_rtl_slim_with_bb): New.
From-SVN: r110217
|
|
* doc/rtl.texi (SYMBOL_REF_CONSTANT, SYMBOL_REF_DATA): Document.
* gengtype.c (adjust_field_rtx_def): Garbage-collect field 2 of
a SYMBOL_REF as either a tree or a constant_descriptor_rtx,
depending on the value of CONSTANT_POOL_ADDRESS_P.
* optabs.c (init_one_libfunc): Nullify SYMBOL_REF_DATA rather than
SYMBOL_REF_DECL.
* varasm.c (make_decl_rtl, build_constant_desc): Set SYMBOL_REF_DATA
rather than SYMBOL_REF_DECL.
(rtx_constant_pool): Remove const_rtx_sym_htab.
(const_desc_rtx_sym_hash, const_desc_rtx_sym_eq): Delete.
(init_varasm_status): Don't initialize const_rtx_sym_htab.
(force_const_mem): Point SYMBOL_REF_DATA to the constant pool entry.
Remove handling of const_rtx_sym_htab.
(find_pool_constant): Delete.
(get_pool_constant, get_pool_constant_mark): Use SYMBOL_REF_CONSTANT
rather than find_pool_constant.
(get_pool_constant_for_function): Delete.
(get_pool_mode, mark_constant): Use SYMBOL_REF_CONSTANT rather than
find_pool_constant.
* rtl.h (rtunion_def): Add rt_constant and rt_ptr fields.
(X0CONSTANT, X0PTR, SYMBOL_REF_DATA): New macros.
(SYMBOL_REF_DECL): Return NULL if CONSTANT_POOL_ADDRESS_P.
(SYMBOL_REF_CONSTANT): New macro.
(get_pool_constant_for_function): Delete.
* config/i386/winnt.c (i386_pe_mark_dllexport): Set SYMBOL_REF_DATA
rather than SYMBOL_REF_DECL.
(i386_pe_mark_dllimport): Likewise.
* config/rs6000/rs6000.c (rs6000_emit_move): Copy SYMBOL_REF_DATA
rather than SYMBOL_REF_DECL.
* config/darwin.c (machopic_indirect_data_reference): Likewise.
(machopic_indirect_call_target): Likewise.
From-SVN: r110210
|
|
From-SVN: r109898
|
|
* regrename.c (regrename_optimize, copyprop_hardreg_forward):
Make them static.
* rtl.h: Remove the prototypes for regrename_optimize and
copyprop_hardreg_forward.
From-SVN: r109891
|
|
* reg-stack.c (reg_to_stack): Make it static.
* rtl.h: Remove the prototype for reg_to_stack.
From-SVN: r109890
|
|
* postreload-gcse.c (gcse_after_reload_main): Make it static.
* rtl.h: Remove the prototype for gcse_after_reload_main.
From-SVN: r109889
|
|
* modulo-sched.c (sms_schedule): Make it static.
* rtl.h: Remove the prototype for sms_schedule.
From-SVN: r109888
|
|
* regmove.c (regmove_optimize, combine_stack_adjustments):
Make them static.
* rtl.h: Remove the prototypes for regmove_optimize and
combine_stack_adjustments.
From-SVN: r109875
|
|
* flow.c (initialize_uninitialized_subregs): Make it static.
* rtl.h: Remove the prototype for
initialize_uninitialized_subregs.
From-SVN: r109873
|
|
* rtlanal.c (global_reg_mentioned_p_1,
global_reg_mentioned_p): Remove.
* rtl.h: Remove the prototype for global_reg_mentioned_p.
From-SVN: r109871
|
|
* loop.c (loop_optimize): Make it static.
* cfgloop.h: Remove the prototype for loop_optimize.
* rtl.h: Likewise.
From-SVN: r109795
|
|
* local-alloc.c (local_alloc): Make it static.
* rtl.h: Remove the prototype for local_alloc.
From-SVN: r109794
|
|
* ifcvt.c (if_convert): Make it static.
* rtl.h: Remove the prototype for if_convert.
From-SVN: r109793
|
|
* global.c (global_alloc): Make it static.
* rtl.h: Remove the prototype for global_alloc.
From-SVN: r109771
|
|
2006-01-16 Gabor Loki <loki@gcc.gnu.org>
* rtl-factoring.c : Add sequence abstraction algorithm.
* cfgcleanup.c (outgoing_edges_match): Extra checks.
(try_crossjump_to_edge): Avoid deleting preserve label when redirecting
ABNORMAL edges.
(block_has_preserve_label): New function.
* common.opt: Register new pass.
* Makefile.in: Ditto.
* passes.c: Ditto.
* timevar.def: Ditto.
* tree-pass.h: Ditto.
* emit-rtl.c (make_jump_insn_raw): Remove forward decl.
* rtl.h (make_jump_insn_raw): Add forward decl.
* doc/invoke.texi: Add documentation for
-frtl-abstract-sequences.
From-SVN: r109750
|
|
* combine.c (combine_instructions): Make it static.
* rtl.h: Remove the prototype for combine_instructions.
From-SVN: r109746
|
|
* cse.c (cse_condition_code_reg): Make it static.
* rtl.h: Remove the prototype for cse_condition_code_reg.
From-SVN: r109742
|
|
* final.c (compute_alignments): Make it static.
* gcse.c (gcse_main, bypass_jumps): Likewise.
* web.c (web_main): Likewise.
* output.h: Remove the prototype for compute_alignments.
* rtl.h: Remove the prototypes for web_main, gcse_main, and
bypass_jumps.
From-SVN: r109051
|
|
* config/alpha/alpha.c (alpha_start_function): Use switch_to_section.
(alpha_elf_select_rtx_section): Return the selected section rather
than emitting assembly code.
(alpha_write_linkage): Emit a ".link" directive directly and then
set in_section to NULL.
(vms_asm_out_constructor): Use switch_to_section.
(vms_asm_out_destructor): Likewise.
(unicosmk_output_common): Set in_section to NULL instead of calling
the dummy common_section function.
(unicosmk_text_section): Delete in favor of...
(unicosmk_output_text_section_asm_op): ...this new function.
(unicosmk_data_section): Delete in favor of...
(unicosmk_output_data_section_asm_op): ...this new function.
(unicosmk_init_sections): New function.
(unicosmk_output_deferred_case_vectors): Use switch_to_section.
(unicosmk_output_ssib): Set in_section to NULL instead of calling
the dummy ssib_section function.
(unicosmk_section_buf): Delete.
* config/alpha/alpha-protos.h (unicosmk_text_section): Delete.
(unicosmk_data_section): Delete.
* config/alpha/elf.h (ASM_OUTPUT_ALIGNED_LOCAL): Use switch_to_section.
(EXTRA_SECTIONS, EXTRA_SECTION_FUNCTIONS, sbss_section, sdata_section)
(SECTION_FUNCTION_TEMPLATE): Delete.
* config/alpha/unicosmk.h (TEXT_SECTION_ASM_OP, DATA_SECTION_ASM_OP)
(READONLY_DATA_SECTION, EXTRA_SECTIONS, EXTRA_SECTION_FUNCTIONS)
(common_section, COMMON_SECTION, ssib_section, SSIB_SECTION): Delete.
(ASM_OUTPUT_ALIGNED_LOCAL): Use switch_to_section.
(TARGET_ASM_INIT_SECTIONS): Define.
* config/alpha/vms.h (LINK_SECTION_ASM_OP, LITERALS_SECTION_ASM_OP)
(EXTRA_SECTIONS, EXTRA_SECTION_FUNCTIONS): Delete.
(link_section, literals_section): Delete.
(ASM_OUTPUT_DEF): Emit the ".literal" directive directly and then
set in_section to NULL.
* config/arm/aof.h (TEXT_SECTION_ASM_OP, DATA_SECTION_ASM_OP): Delete.
(EXTRA_SECTIONS, EXTRA_SECTION_FUNCTIONS, ZERO_INIT_SECTION): Delete.
(COMMON_SECTION): Delete.
(TARGET_ASM_INIT_SECTIONS): Define.
(ASM_OUTPUT_COMMON): Set in_section to NULL rather than calling
the dummy common_section function.
* config/arm/aout.h (ASM_OUTPUT_ALIGNED_LOCAL): Use switch_to_section.
* config/arm/arm.c (get_jump_table_size): Use pointer comparison
between readonly_data_section and text_section to check whether
read-only data is being put in the text section.
(arm_output_function_epilogue): Use switch_to_section.
(arm_elf_asm_constructor): Likewise.
(thumb_call_via_reg): Replace call to in_text_section with
a comparison between in_section and text_section.
(arm_file_end): Use switch_to_section.
(aof_text_section): Delete in favor of...
(aof_output_text_section_asm_op): ...this new function.
(aof_data_section): Delete in favor of...
(aof_output_data_section_asm_op): ...this new function.
(aof_asm_init_sections): New function.
(zero_init_section): Moved from config/arm/aof.h.
(aof_dump_imports, aof_file_start): Use switch_to_section.
* config/arm/arm.h (thumb_call_via_label): Update comment.
* config/arm/arm-protos.h (aof_text_section, aof_data_section): Delete.
(common_section): Delete.
* config/arm/pe.h (ASM_DECLARE_FUNCTION_NAME): Use switch_to_section.
(ASM_DECLARE_OBJECT_NAME): Update the type of save_section. Use the
global switch_to_section function instead of the old port-local one.
(EXTRA_SECTIONS, EXTRA_SECTION_FUNCTIONS, DRECTVE_SECTION_FUNCTION)
(SWITCH_TO_SECTION_FUNCTION): Delete.
(drectve_section): Redefine as a macro.
* config/arm/unknown-elf.h (ASM_OUTPUT_ALIGNED_BSS):
(ASM_OUTPUT_ALIGNED_DECL_LOCAL): Use get_named_section and
switch_to_section.
* config/avr/avr.c (progmem_section): New variable.
(avr_output_progmem_section_asm_op): New function.
(avr_asm_init_sections): New function.
(avr_output_addr_vec_elt): Use switch_to_section.
* config/avr/avr.h (progmem_section): Declare.
(EXTRA_SECTIONS, EXTRA_SECTION_FUNCTIONS): Delete.
(READONLY_DATA_SECTION): Delete.
(TARGET_ASM_INIT_SECTIONS): Define.
(ASM_OUTPUT_CASE_LABEL): Use switch_to_section.
* config/avr/avr-protos.h (progmem_section): Delete.
* config/bfin/bfin.h (ASM_OUTPUT_LOCAL): Use switch_to_section.
* config/c4x/c4x.h (EXTRA_SECTIONS, EXTRA_SECTION_FUNCTIONS)
(INIT_SECTION_FUNCTION, FINI_SECTION_FUNCTION): Delete.
* config/darwin-sections.def: New file.
* config/darwin.c: Define all sections in darwin-sections.def.
(output_objc_section_asm_op, darwin_init_sections): New functions.
(machopic_output_indirection): Use switch_to_section.
(machopic_select_section): Return the selected section rather than
emitting assembly code. Replace the static function table with
inline conditional expressions. Update the tests of last_text_section
and move them into the FUNCTION_DECL block.
(machopic_select_rtx_section): Return the selected section rather than
emitting assembly code.
(machopic_asm_out_constructor, machopic_asm_out_destructor)
(darwin_file_end): Use switch_to_section.
* config/darwin.h: Use darwin-sections.def to declare sections.
(INIT_SECTION_ASM_OP): Remove empty definition.
(HAS_INIT_SECTION): Define this instead.
(SECTION_FUNCTION, EXTRA_SECTIONS, EXTRA_SECTION_FUNCTIONS): Delete.
(READONLY_DATA_SECTION, TARGET_ASM_EXCEPTION_SECTION): Delete.
(TARGET_ASM_EH_FRAME_SECTION): Delete.
(TARGET_ASM_INIT_SECTIONS): Define.
* config/darwin-protos.h (darwin_init_sections): Declare.
(machopic_picsymbol_stub_section, machopic_picsymbol_stub1_section)
(machopic_symbol_stub_section, machopic_symbol_stub1_section): Delete.
(machopic_lazy_symbol_ptr_section, machopic_nl_symbol_ptr_section)
(constructor_section, destructor_section, mod_init_section): Delete.
(mod_term_section): Delete.
(darwin_exception_section, darwin_eh_frame_section): Delete.
(machopic_select_section): Return a section.
(machopic_select_rtx_section): Likewise.
(text_coal_section, text_unlikely_section, text_unlikely_coal_section)
(const_section, const_coal_section, const_data_section): Delete.
(const_data_coal_section, data_coal_section, cstring_section): Delete.
(literal4_section, literal8_section, constructor_section): Delete.
(mod_init_section, mod_term_section, destructor_section): Delete.
(objc_class_section, objc_meta_class_section, objc_category_section)
(objc_class_vars_section, objc_instance_vars_section): Delete.
(objc_cls_meth_section, objc_inst_meth_section): Delete.
(objc_cat_cls_meth_section, objc_cat_inst_meth_section): Delete.
(objc_selector_refs_section, objc_selector_fixup_section): Delete.
(objc_symbols_section, objc_module_info_section): Delete.
(objc_image_info_section, objc_protocol_section): Delete.
(objc_string_object_section, objc_constant_string_object_section)
(objc_class_names_section, objc_meth_var_names_section): Delete.
(objc_meth_var_types_section, objc_cls_refs_section): Delete.
(machopic_lazy_symbol_ptr_section, machopic_nl_symbol_ptr_section)
(machopic_symbol_stub_section, machopic_picsymbol_stub_section)
(darwin_exception_section, darwin_eh_frame_section): Delete.
* config/t-darwin (darwin.o): Depend on config/darwin-sections.def.
* config/frv/frv.c (frv_asm_out_constructor): Use switch_to_section.
(frv_asm_out_destructor): Likewise.
* config/frv/frv.h (EXTRA_SECTIONS, EXTRA_SECTION_FUNCTIONS): Delete.
(SDATA_SECTION_FUNCTION, FIXUP_SECTION_FUNCTION): Delete.
(ASM_OUTPUT_ALIGNED_DECL_LOCAL): Use switch_to_section and
get_named_section.
(ASM_OUTPUT_CASE_LABEL): Use switch_to_section.
* config/frv/frv-protos.h (fixup_section, sdata_section, sbss_section)
(data_section): Delete.
* config/i386/cygming.h (EXTRA_SECTIONS, EXTRA_SECTION_FUNCTIONS)
(DRECTVE_SECTION_FUNCTION): Delete.
(drectve_section): Redefine as a macro that sets in_section after
emitting the directive.
(SWITCH_TO_SECTION_FUNCTION): Delete.
* config/i386/darwin.h (ASM_OUTPUT_ALIGN): Replace call to
in_text_section with comparison between in_section and text_section.
* config/i386/i386.c (x86_64_elf_select_section): Return the section
rather than emitting assembly code. Use get_named_section.
(x86_output_aligned_bss, ix86_file_end): Use switch_to_section and
get_named_section.
(machopic_output_stub): Use switch_to_section.
* config/i386/nwld.c (nwld_named_section_asm_out_constructor)
(nwld_named_section_asm_out_destructor): Use get_section and
switch_to_section.
* config/ia64/ia64.c (ia64_select_rtx_section): Return the section
rather than emitting assembly code.
(ia64_rwreloc_select_section): Likewise.
(ia64_rwreloc_select_rtx_section): Likewise.
* config/ia64/ia64-protos.h (sdata_section, sbss_section): Delete.
* config/ia64/sysv4.h (ASM_OUTPUT_ALIGNED_DECL_LOCAL): Use
switch_to_section.
(EXTRA_SECTIONS, EXTRA_SECTION_FUNCTIONS): Delete.
(SDATA_SECTION_FUNCTION, SBSS_SECTION_FUNCTION): Delete.
* config/iq2000/iq2000.c (iq2000_select_rtx_section): Return the
section rather than emitting assembly code.
(iq2000_select_section): Likewise.
* config/iq2000/iq2000.h (rdata_section, sdata_section): Delete.
(sbss_section): Delete.
* config/m32r/m32r.h (ASM_OUTPUT_ALIGNED_BSS): Use switch_to_section
and get_named_section.
* config/m32r/m32r-protos.h (sbss_section, sdata_section): Delete.
* config/mcore/mcore-elf.h (EXPORTS_SECTION_ASM_OP): Delete.
(SUBTARGET_EXTRA_SECTIONS, SUBTARGET_EXTRA_SECTION_FUNCTIONS): Delete.
(EXPORT_SECTION_FUNCTION, SUBTARGET_SWITCH_SECTIONS): Delete.
(MCORE_EXPORT_NAME): Emit the exports directive directly, then set
in_section to NULL.
(ASM_DECLARE_FUNCTION_NAME): Use switch_to_section.
(ASM_DECLARE_OBJECT_NAME): Update the type of save_section. Use the
global switch_to_section function instead of the old port-local one.
* config/mcore/mcore.h (EXTRA_SECTIONS, EXTRA_SECTION_FUNCTIONS)
(SWITCH_SECTION_FUNCTION): Delete.
* config/mcore/mcore-pe.h (SUBTARGET_SWITCH_SECTIONS): Delete.
(DRECTVE_SECTION_ASM_OP, SUBTARGET_EXTRA_SECTIONS): Delete.
(SUBTARGET_EXTRA_SECTION_FUNCTIONS, DRECTVE_SECTION_FUNCTION): Delete.
(MCORE_EXPORT_NAME): Emit ".section .drectve" directly, then set
in_section to NULL.
(ASM_DECLARE_OBJECT_NAME): Update the type of save_section. Use the
global switch_to_section function instead of the old port-local one.
(ASM_DECLARE_FUNCTION_NAME): Use switch_to_section.
* config/mips/mips.c (mips_file_start): Update comment.
(mips_output_aligned_bss): Use switch_to_section and get_named_section.
(mips_output_aligned_decl_common): Use switch_to_section.
(mips_select_rtx_section): Return the section rather than emitting
assembly code. Use get_named_section.
(mips_function_rodata_section: Likewise get_section.
(build_mips16_function_stub): Use switch_to_section.
* config/mips/mips.h (ASM_OUTPUT_IDENT): Use switch_to_section.
(SDATA_SECTION_ASM_OP): Delete.
* config/mips/vxworks.h (EXTRA_SECTIONS): Delete.
(EXTRA_SECTION_FUNCTIONS): Delete.
* config/mmix/mmix.c (mmix_file_start, mmix_file_end)
(mmix_asm_output_aligned_local): Use switch_to_section.
* config/pa/pa.c (som_readonly_data_section, som_one_only_data_section)
(som_one_only_readonly_data_section): New variables.
(pa_output_function_epilogue): Set in_section to NULL instead of
calling forget_section.
(output_deferred_plabels): Use select_section.
(pa_asm_output_mi_thunk): Likewise. Set in_section to NULL instead
of calling forget_section.
(pa_asm_output_aligned_bss, pa_asm_output_aligned_common)
(pa_asm_output_aligned_local): Use select_section.
(som_text_section_asm_op): Delete in favor of...
(som_output_text_section_asm_op): ...this new function.
(pa_som_asm_init_sections): New function.
(pa_select_section): Return the section rather than emitting
assembly code.
* config/pa/pa.h (EXTRA_SECTIONS, EXTRA_SECTION_FUNCTIONS): Delete.
(SOM_READONLY_DATA_SECTION_FUNCTION): Delete.
(SOM_ONE_ONLY_READONLY_DATA_SECTION_FUNCTION): Delete.
(SOM_ONE_ONLY_DATA_SECTION_FUNCTION, FORGET_SECTION_FUNCTION): Delete.
* config/pa/pa-protos.h (som_text_section_asm_op): Delete.
(som_readonly_data_section, som_one_only_readonly_data_section)
(som_one_only_data_section, forget_section): Delete.
* config/pa/som.h (TEXT_SECTION_ASM_OP): Delete.
(TARGET_ASM_INIT_SECTIONS): Define.
(READONLY_DATA_SECTION, TARGET_ASM_EXCEPTION_SECTION): Delete.
* config/rs6000/rs6000.c (read_only_data_section): New variable.
(private_data_section, read_only_private_data_section): New variables.
(sdata2_section, toc_section): New variables.
(rs6000_file_start): Use switch_to_section.
(rs6000_assemble_integer): Use comparisons against in_section
instead of calling in_toc_section and in_text_section. Use
unlikely_text_section_p.
(rs6000_elf_output_toc_section_asm_op): New function, derived
from the old rs6000/sysv4.h toc_section function.
(rs6000_elf_asm_init_sections): New function.
(rs6000_elf_select_rtx_section, rs6000_elf_select_section): Return
the section rather than emitting assembly code.
(machopic_output_stub): Use switch_to_section.
(toc_section): Delete dummy function.
(rs6000_elf_asm_out_constructor, rs6000_elf_asm_out_destructor): Use
switch_to_section and get_section.
(rs6000_xcoff_output_readonly_section_asm_op): New function.
(rs6000_xcoff_output_readwrite_section_asm_op): New function.
(rs6000_xcoff_output_toc_section_asm_op): New function, derived from
the old rs6000/xcoff.h toc_section function.
(rs6000_xcoff_asm_init_sections): New function.
(rs6000_xcoff_select_section, rs6000_xcoff_select_rtx_section): Return
the section rather than emitting assembly code.
(rs6000_xcoff_file_start): Use switch_to_section.
(rs6000_xcoff_file_end): Likewise.
* config/rs6000/rs6000-protos.h (toc_section, sdata_section): Delete.
(sdata2_section, sbss_section, private_data_section): Delete.
(read_only_data_section, read_only_private_data_section): Delete.
* config/rs6000/sysv4.h (EXTRA_SECTIONS, EXTRA_SECTION_FUNCTIONS)
(TOC_SECTION_FUNCTION, SDATA_SECTION_FUNCTION, SDATA2_SECTION_FUNCTION)
(SBSS_SECTION_FUNCTION, INIT_SECTION_FUNCTION): Delete.
(FINI_SECTION_FUNCTION): Delete.
(TARGET_ASM_INIT_SECTIONS): Define.
(ASM_OUTPUT_ALIGNED_LOCAL): Use switch_to_section.
* config/rs6000/xcoff.h (EXTRA_SECTIONS, EXTRA_SECTION_FUNCTIONS)
(READ_ONLY_DATA_SECTION_FUNCTION, PRIVATE_DATA_SECTION_FUNCTION)
(READ_ONLY_PRIVATE_DATA_SECTION_FUNCTION, TOC_SECTION_FUNCTION)
(READONLY_DATA_SECTION): Delete.
(TARGET_ASM_INIT_SECTIONS): Define.
(ASM_DECLARE_FUNCTION_NAME): Use switch_to_section. Set in_section
to NULL rather than no_section.
(TARGET_ASM_EXCEPTION_SECTION): Delete.
* config/sh/sh.c (sh_file_start): Use switch_to_section.
* config/sparc/sparc.c (emit_pic_helper): Use switch_to_section.
(sparc_output_deferred_case_vectors): Likewise. Remove argument
from call to current_function_section.
* config/stormy16/stormy16.c: Include ggc.h and gt-storm16.h.
(bss100_section): New variable.
(xstormy16_asm_output_aligned_common): Use switch_to_section.
(xstormy16_asm_init_sections): New function.
(xstormy16_asm_out_destructor, xstormy16_asm_out_constructor): Use
switch_to_section and get_section.
(xstormy16_output_addr_vec): Use switch_to_section. Remove argument
from calls to current_function_section.
* config/stormy16/stormy16.h (EXTRA_SECTIONS): Delete.
(XSTORMY16_SECTION_FUNCTION, EXTRA_SECTION_FUNCTIONS): Delete.
(TARGET_ASM_INIT_SECTIONS): Define.
* config/stormy16/stormy16-protos.h (bss100_section): Delete.
* config/svr3.h (ASM_OUTPUT_LOCAL): Use switch_to_section.
(EXTRA_SECTIONS, EXTRA_SECTION_FUNCTIONS, INIT_SECTION_FUNCTION)
(FINI_SECTION_FUNCTION): Delete.
* config/v850/v850.c: Include gt-v850.h.
(rosdata_section, rozdata_section, tdata_section, zdata_section)
(zbss_section): New variables.
(v850_output_aligned_bss): Use switch_to_section.
(v850_asm_init_sections): New function.
(v850_select_section): Return the section rather than emitting
assembly code.
* config/v850/v850.h (EXTRA_SECTIONS, EXTRA_SECTION_FUNCTIONS)
(ZDATA_SECTION_ASM_OP, ZBSS_SECTION_ASM_OP, TDATA_SECTION_ASM_OP)
(ROSDATA_SECTION_ASM_OP, ROZDATA_SECTION_ASM_OP): Delete.
(TARGET_ASM_INIT_SECTIONS): Define.
* config/v850/v850-protos.h (sdata_section, rosdata_section): Delete.
(sbss_section, tdata_section, zdata_section, rozdata_section): Delete.
(zbss_section): Delete.
* config/vax/vaxv.h (ASM_OUTPUT_LOCAL): Use switch_to_section.
* config/vx-common.h (vxworks_exception_section): Delete.
(TARGET_ASM_EXCEPTION_SECTION): Delete.
* config/xtensa/xtensa.c (xtensa_select_rtx_section): Return the
section rather than emitting assembly code.
* config/xtensa/xtensa.h (ASM_OUTPUT_POOL_PROLOGUE): Use
switch_to_section.
* Makefile.in (GTFILES): Add $(srcdir)/output.h.
* coretypes.h (section): New union and typedef.
* dbxout.c (FORCE_TEXT): Use switch_to_section. Remove argument
from call to current_function_section.
(dbxout_function_end, dbxout_init, dbxout_source_file, dbxout_finish)
(dbxout_symbol_location): Use switch_to_section.
* dwarf2out.c (named_section_eh_frame_section): Delete, moving
most of the code into...
(default_eh_frame_section): ...here. Return a section.
(collect2_eh_frame_section): Delete, moving most of the code into..
(switch_to_eh_frame_section): ...this new function.
(debug_info_section, debug_abbrev_section, debug_aranges_section)
(debug_macinfo_section, debug_line_section, debug_loc_section)
(debug_pubnames_section, debug_str_section, debug_ranges_section): New
variables.
(output_call_frame_info): Call switch_to_eh_frame_section instead of
eh_frame_section. Use switch_to_section and get_section.
(dwarf2out_begin_prologue): Use switch_to_section.
(AT_string_form): Check the flags in debug_str_section instead of
DEBUG_STR_SECTION_FLAGS.
(output_comp_unit): Use switch_to_section, get_section, and
debug_info_section.
(output_line_info, secname_for_decl): Use unlikely_text_section_p.
(dwarf2out_begin_block): Use switch_to_section. Remove argument
from call to current_function_section.
(dwarf2out_var_location): Use unlikely_text_section_p.
(dwarf2out_source_line): Use switch_to_section. Remove argument
from call to current_function_section.
(dwarf2out_start_source_file, dwarf2out_end_source_file)
(dwarf2out_define, dwarf2out_undef: Use switch_to_section and
debug_macinfo_section.
(dwarf2out_init): Initialize the new section variables. Use them
instead of calls to named_section_flags. Use switch_to_section.
(output_indirect_string): Use switch_to_section and debug_str_section.
(dwarf2out_finish): Use switch_to_section and the new section
variables.
* except.c (default_exception_section): Return the section instead
of emitting assembly code.
(output_function_exception_table): Use the global exception_section
variable instead of the target hook. Use switch_to_section. Remove
argument from call to current_function_section.
* final.c (HAVE_READONLY_DATA_SECTION): Delete.
(shorten_branches): Use pointer comparisons to detect whether the
text section is the same as readonly_data_section.
(profile_function): Use switch_to_section. Remove argument from
call to current_function_section.
(final_scan_insn): Likewise. Update use of last_text_section.
* gengtype.c (open_base_files): Add an include of output.h.
* output.h (text_section, data_section, readonly_data_section)
(ctors_section, dtors_section, bss_section, init_section)
(fini_section, sdata_section): Turn into section pointers.
(in_text_section, in_unlikely_text_section, exports_section)
(drectve_section, named_section, mergeable_string_section)
(last_text_section_name): Delete.
(default_exception_section, default_eh_frame_section): Return sections.
(SECTION_DECLARED, SECTION_NAMED): New macros.
(SECTION_MACH_DEP): Bump value.
(section_common, named_section, unnamed_section): New structures.
(unnamed_section_callback): New typedef.
(section): New union.
(sbss_section, exception_section, eh_frame_section): New variables.
(in_section, last_text_section): Turn into section pointers.
(get_unnamed_section, get_section, get_named_section): New functions.
(mergeable_constant_section, function_section): Return a section.
(unlikely_text_section): Likewise.
(current_function_section): Likewise. Remove the decl argument.
(unlikely_text_section_p, switch_to_section): New functions.
(output_section_asm_op): New function.
(set_named_section_flags, named_section_flags, named_section_real)
(named_section_first_declaration): Delete.
(default_select_section, default_elf_select_section): Return a section.
(default_elf_select_section_1, default_function_rodata_section)
(default_no_function_rodata_section, default_select_rtx_section)
(default_elf_select_rtx_section): Likewise.
* rtl.h (in_data_section): Delete.
* sdbout.c (sdbout_one_type): Use switch_to_section.
* system.h (EXTRA_SECTIONS, EXTRA_SECTION_FUNCTIONS): Poison.
(READONLY_DATA_SECTION, TARGET_ASM_EXCEPTION_SECTION): Poison.
(TARGET_ASM_EH_FRAME_SECTION): Poison.
* target-def.h (TARGET_ASM_INIT_SECTIONS): New macro.
(TARGET_ASM_EXCEPTION_SECTION, TARGET_ASM_EH_FRAME_SECTION): Delete.
(TARGET_ASM_OUT): Update after above changes.
* target.h (init_sections): New hook.
(exception_section, eh_frame_section): Delete.
(select_section, select_rtx_section, function_rodata_section): Return
a section rather than emitting assembly code.
* varasm.c (text_section, data_section, readonly_data_section)
(ctors_section, dtors_section, bss_section, init_section)
(fini_section): Turn into section pointers.
(sdata_section, sbss_section, exception_section): New variables.
(eh_frame_section): New variable.
(in_section): Make global and turn into a section pointer.
(last_text_section): Turn into a section pointer.
(unnamed_sections): New variable.
(in_named_name, last_text_section_name): Delete.
(EXTRA_SECTION_FUNCTIONS): Delete.
(in_named_entry): Delete.
(section_htab): New variable, replacing...
(in_named_htab): ...this deleted variable.
(section_entry_eq, section_entry_hash): New functions, based on...
(in_named_entry_eq, in_named_entry_hash): ...these deleted functions.
(get_unnamed_section, get_section): New functions.
(unlikely_text_section): Return a section instead of emitting
assembly code.
(in_text_section, in_unlikely_text_section, in_data_section): Delete.
(get_named_section_flags, named_section_first_declaration): Delete.
(unlikely_text_section_p): New function.
(named_section_real, named_section): Delete.
(get_named_section): New function.
(asm_output_bss, asm_output_aligned_bss): Use switch_to_section.
(function_section): Return a section rather than emitting
assembly code.
(current_function_section): Likewise. Remove argument. Use
last_text_section if nonnull, otherwise use function_section.
(default_function_rodata_section): Return a section rather than
emitting assembly code. Use get_section.
(default_no_function_rodata_section): Return a section rather than
emitting assembly code.
(variable_section): Use switch_to_section and get_named_section.
(mergeable_string_section): Return a section rather than emitting
assembly code. Use get_section. Make static. Don't take special
countermeasures for empty strings.
(mergeable_constant_section): Return a section rather than emitting
assembly code. Use get_section.
(default_named_section_asm_out_destructor): Use switch_to_section
and get_section.
(default_dtor_section_asm_out_destructor): Use switch_to_section.
(default_named_section_asm_out_constructor): Use switch_to_section
and get_section.
(default_ctor_section_asm_out_constructor): Use switch_to_section.
(assemble_start_function): Likewise. Set last_text_section to
NULL rather than no_section. Change the type of save_section.
(assemble_zeros, assemble_variable): Use the section flags to detect
whether or not a section is text.
(assemble_static_space): Use switch_to_section.
(assemble_trampoline_template): Likewise.
(output_constant_def_contents): Use switch_to_section and
get_named_section.
(output_constant_pool_1): Use switch_to_section. Use the section
flags to see whether sections contain mergeable data.
(init_varasm_once): Initialize section_htab instead of in_named_htab.
Initialize new section variables. Call TARGET_ASM_INIT_SECTIONS.
(default_elf_asm_named_section): Use SECTION_DECLARED to detect
whether a section has already been declared.
(default_select_section, default_elf_select_section): Return a
section rather than emitting assembly code.
(default_elf_select_section_1): Likewise. Use bss_section for
SECCAT_BSS if nonnull. Use get_named_section.
(default_select_rtx_section): Return a section rather than
emitting assembly code.
(default_elf_select_rtx_section): Likewise. Use get_named_section.
(file_end_indicate_exec_stack): Use switch_to_section and get_section.
(output_section_asm_op, switch_to_section): New functions.
* vmsdbgout.c (vmsdbgout_finish): Use switch_to_section and
get_named_section.
* doc/tm.texi: Expand the introduction to the sections documentation.
(TRAMPOLINE_SECTION): Document new interface.
(SDATA_SECTION_ASM_OP): Document new macro.
(READONLY_DATA_SECTION): Delete.
(SDATA_SECTION_ASM_OP): Document new macro.
(EXTRA_SECTIONS, EXTRA_SECTION_FUNCTIONS): Delete.
(TARGET_ASM_INIT_SECTIONS): Document new hook.
(TARGET_ASM_SELECT_SECTION, TARGET_ASM_FUNCTION_RODATA_SECTION)
(TARGET_ASM_SELECT_RTX_SECTION): Adjust for new interface.
(TARGET_EXCEPTION_SECTION, TARGET_EH_FRAME_SECTION): Delete.
gcc/java/
* class.c (build_utf8_ref, emit_register_classes): Use
switch_to_section and get_section.
From-SVN: r108152
|
|
PR rtl-optimization/23585
* rtlanal.c (rtx_addr_can_trap_p_1): New predicate extracted from...
(rtx_addr_can_trap_p): ... here. Invoke rtx_addr_can_trap_p_1.
(may_trap_p_1): New predicate extracted from...
(may_trap_p): ... here. Invoke may_trap_p_1.
(may_trap_or_fault_p): New predicate.
* rtl.h (may_trap_or_fault_p): Declare it.
* reorg.c (steal_delay_list_from_target): Use may_trap_or_fault_p
instead of may_trap_p.
(steal_delay_list_from_fallthrough): Likewise.
(fill_simple_delay_slots): Likewise.
(fill_slots_from_thread): Likewise.
* function.c (pad_to_arg_alignment): Rework comment about
SPARC_STACK_BOUNDARY_HACK.
* config/sparc/sparc.h: Likewise.
From-SVN: r105671
|
|
PR rtl-optimization/23098
* cse.c (fold_rtx_mem): Call delegitimize_address target hook.
* simplify-rtx.c (constant_pool_reference_p): New function.
* rtl.h (constant_pool_reference_p): New prototype.
* config/i386/i386.md (pushf split, mov[sdx]f split): Use
constant_pool_reference_p in condition and
avoid_constant_pool_reference in preparation statements.
* gcc.target/i386/pr23098.c: New test.
From-SVN: r103935
|
|
* rtl.h (gen_frame_mem, gen_tmp_stack_mem): Declare.
* emit-rtl.c (gen_frame_mem, gen_tmp_stack_mem): New functions.
* builtins.c (expand_builtin_return_addr): Use gen_frame_mem.
From-SVN: r103917
|
|
From-SVN: r103542
|
|
* Makefile.in (RTL_BASE_H): Add real.h.
* real.h (REAL_VALUE_FROM_CONST_DOUBLE): Use structure copy
instead of memcpy.
* emit-rtl.c (const_double_from_real_value): Likewise; use rtx.u.rv
directly.
* rtl.c (rtl_check_failed_code_mode): New.
* rtl.h (struct rtx_def): Add u.rv.
(XCMWINT, XCNMPRV): New.
(CONST_DOUBLE_LOW, CONST_DOUBLE_HIGH): Use XCMWINT.
(CONST_DOUBLE_REAL_VALUE): Use XCNMPRV; constify.
Co-Authored-By: Richard Henderson <rth@redhat.com>
From-SVN: r102643
|
|
2005-07-05 Paolo Bonzini <bonzini@gnu.org>
* Makefile.in: Adjust dependencies.
* tree-pass.h: Add new passes and passes formerly in tree-optimize.c.
* basic-block.h (duplicate_computed_gotos): Remove, it is now static.
* alias.c (rest_of_handle_cfg, pass_cfg): New.
* bb-reorder.c (duplicate_computed_gotos): Make it static.
* cfgexpand.c (tree_expand_cfg): Add code formerly at the beginning of
rest_of_compilation.
* bb-reorder.c (gate_duplicate_computed_gotos,
pass_duplicate_computed_gotos, gate_handle_reorder_blocks,
rest_of_handle_reorder_blocks, pass_reorder_blocks,
gate_handle_partition_blocks, rest_of_handle_partition_blocks,
pass_partition_blocks): New.
* bt-load.c (gate_handle_branch_target_load_optimize,
rest_of_handle_branch_target_load_optimize,
pass_branch_target_load_optimize): New.
* cfgcleanup.c (rest_of_handle_jump, pass_jump, rest_of_handle_jump2,
pass_jump2): New.
* cfglayout.c (pass_insn_locators_initialize): New.
* cfgrtl.c (pass_free_cfg): New.
* combine.c (gate_handle_combine, rest_of_handle_combine,
pass_combine): New.
* cse.c (gate_handle_cse, rest_of_handle_cse, pass_cse,
gate_handle_cse2, rest_of_handle_cse2, pass_cse2): New.
* emit-rtl.c (pass_unshare_all_rtl, pass_remove_unnecessary_notes): New.
* except.c (pass_set_nothrow_function_flags,
pass_convert_to_eh_region_ranges, gate_handle_eh, rest_of_handle_eh,
pass_rtl_eh): New.
* final.c (pass_compute_alignments, rest_of_handle_final, pass_final,
rest_of_handle_shorten_branches, pass_shorten_branches,
rest_of_clean_state, pass_clean_state): New.
* flow.c (pass_recompute_reg_usage, gate_remove_death_notes,
rest_of_handle_remove_death_notes, pass_remove_death_notes,
rest_of_handle_life, pass_life, rest_of_handle_flow2,
pass_flow2): New.
* function.c (pass_instantiate_virtual_regs, pass_init_function,
rest_of_handle_check_leaf_regs, pass_leaf_regs): New.
* gcse.c (gate_handle_jump_bypass, rest_of_handle_jump_bypass,
pass_jump_bypass, gate_handle_gcse, rest_of_handle_gcse,
pass_gcse): New.
* global.c (rest_of_handle_global_alloc, pass_global_alloc): New.
* ifcvt.c (gate_handle_if_conversion, rest_of_handle_if_conversion,
pass_rtl_ifcvt, gate_handle_if_after_combine,
rest_of_handle_if_after_combine, pass_if_after_combine,
gate_handle_if_after_reload, rest_of_handle_if_after_reload,
pass_if_after_reload): New.
* integrate.c (pass_initial_value_sets): New.
* jump.c (pass_cleanup_barriers, purge_line_number_notes,
pass_purge_lineno_notes): New.
* mode-switching.c (rest_of_handle_mode_switching,
pass_mode_switching): New.
* local-alloc.c (rest_of_handle_local_alloc, pass_local_alloc): New.
* loop-init.c (gate_handle_loop2, rest_of_handle_loop2,
pass_loop2): New.
* loop.c (gate_handle_loop_optimize, rest_of_handle_loop_optimize,
pass_loop_optimize): New.
* modulo-sched.c (gate_handle_sms, rest_of_handle_sms,
pass_sms): New.
* postreload-gcse.c (gate_handle_gcse2, rest_of_handle_gcse2,
pass_gcse2): New.
* postreload.c (gate_handle_postreload, rest_of_handle_postreload,
pass_postreload_cse): New.
* profile.c (gate_handle_profiling, pass_profiling,
rest_of_handle_branch_prob, pass_branch_prob): New.
* recog.c (pass pass_split_for_shorten_branches, gate_do_final_split,
pass_split_before_regstack, gate_handle_split_before_regstack,
gate_handle_peephole2, rest_of_handle_peephole2, pass_peephole2,
rest_of_handle_split_all_insns, pass_split_all_insns): New.
* reg-stack.c (gate_handle_stack_regs, rest_of_handle_stack_regs,
pass_stack_regs): New.
* regmove.c (gate_handle_regmove, rest_of_handle_regmove, pass_regmove,
gate_handle_stack_adjustments, rest_of_handle_stack_adjustments,
pass_stack_adjustments): New.
* regrename.c (gate_handle_regrename, rest_of_handle_regrename,
pass_regrename): New.
* reorg.c (gate_handle_delay_slots, rest_of_handle_delay_slots,
pass_delay_slots, gate_handle_machine_reorg,
rest_of_handle_machine_reorg, pass_machine_reorg): New.
* rtl.h (extern void purge_line_number_notes): New.
* sched-rgn.c (gate_handle_sched, rest_of_handle_sched,
gate_handle_sched2, rest_of_handle_sched2, pass_sched,
pass_sched2): New.
* tracer.c (gate_handle_tracer, rest_of_handle_tracer,
pass_tracer): New.
* value-prof.c (gate_handle_value_profile_transformations,
rest_of_handle_value_profile_transformations,
pass_value_profile_transformations): New.
* var-tracking.c (gate_handle_var_tracking,
pass_variable_tracking): New.
* web.c (gate_handle_web, rest_of_handle_web, pass_web): New.
* passes.c (open_dump_file, close_dump_file, rest_of_handle_final,
rest_of_handle_delay_slots, rest_of_handle_stack_regs,
rest_of_handle_variable_tracking, rest_of_handle_machine_reorg,
rest_of_handle_old_regalloc, rest_of_handle_regrename,
rest_of_handle_reorder_blocks, rest_of_handle_partition_blocks,
rest_of_handle_sms, rest_of_handle_sched, rest_of_handle_sched2,
rest_of_handle_gcse2, rest_of_handle_regmove,
rest_of_handle_tracer, rest_of_handle_if_conversion,
rest_of_handle_if_after_combine, rest_of_handle_if_after_reload,
rest_of_handle_web, rest_of_handle_branch_prob,
rest_of_handle_value_profile_transformations, rest_of_handle_cfg,
rest_of_handle_jump_bypass, rest_of_handle_combine,
rest_of_handle_life, rest_of_handle_cse, rest_of_handle_cse2,
rest_of_handle_gcse, rest_of_handle_loop_optimize,
rest_of_handle_loop2, rest_of_handle_branch_target_load_optimize,
rest_of_handle_mode_switching, rest_of_handle_jump,
rest_of_handle_eh, rest_of_handle_stack_adjustments,
rest_of_handle_flow2, rest_of_handle_jump2,
rest_of_handle_peephole2, rest_of_handle_postreload,
rest_of_handle_shorten_branches, rest_of_clean_state,
rest_of_compilation): Remove.
* cgraphunit.c (ipa_passes): Moved from tree-optimize.c.
* passes.c (dump_flags, in_gimple_form, all_passes,
all_ipa_passes, all_lowering_passes, register_one_dump_file,
register_dump_files, next_pass_1, last_verified, execute_todo,
execute_one_pass, execute_pass_list, execute_ipa_pass_list): Moved
from tree-optimize.c.
(init_optimization_passes): Moved from tree-optimize.c,
adding the RTL optimizations.
* tree-dump.h (dump_info_p, dump_flag): Moved from tree.h.
* tree-optimize.c (dump_flags, in_gimple_form, all_passes,
all_ipa_passes, all_lowering_passes, register_one_dump_file,
register_dump_files, next_pass_1, last_verified, execute_todo,
execute_one_pass, execute_pass_list, execute_ipa_pass_list,
init_tree_optimization_passes, ipa_passes): Delete.
* tree-pass.h (enum tree_dump_index): Moved from tree.h, removing
the RTL dumps.
(TDF_*, get_dump_file_name, dump_enabled_p, dump_initialized_p,
dump_begin, dump_end, dump_node, dump_switch_p, dump_flag_name): Moved
from tree.h.
(ipa_passes): Remove.
(all_passes, all_ipa_passes, all_lowering_passes): Now extern.
* tree.h (enum tree_dump_index, TDF_*, get_dump_file_name,
dump_enabled_p, dump_initialized_p, dump_begin, dump_end, dump_node,
dump_switch_p, dump_flag_name): Moved to tree-pass.h.
(dump_info_p, dump_flag): Moved to tree-dump.h.
* Makefile.in: Adjust dependencies for tree-pretty-print.c,
cgraph.c, opts.c.
* passes.c (finish_optimization_passes): Use dump_begin
and dump_end, TDI_end.
(gate_rest_of_compilation): New.
(pass_rest_of_compilation): Use it.
(gate_postreload, pass_postreload): New.
* toplev.c (general_init): Rename init_tree_optimization_passes.
* toplev.h (init_tree_optimization_passes): Rename to
init_optimizations_passes.
* tree-dump.c (dump_flag): Make static.
(dump_files): Remove RTL dumps.
* tree-optimize.c (pass_all_optimizations, pass_early_local_passes,
pass_cleanup_cfg, pass_free_cfg_annotations,
pass_cleanup_cfg_post_optimizing, pass_free_datastructures,
pass_init_datastructures, pass_fixup_cfg): Make non-static.
* tree-pretty-print.c: Include tree-pass.h.
* cgraph.c: Include tree-dump.h.
cp:
2005-07-05 Paolo Bonzini <bonzini@gnu.org>
* Makefile.in (class.o, decl2.o): Adjust dependencies.
* class.c: Include tree-dump.h.
* decl2.c: Include tree-dump.h.
java:
2005-07-05 Paolo Bonzini <bonzini@gnu.org>
* Makefile.in (parse.o): Adjust dependencies.
* parse.y: Include tree-dump.h.
From-SVN: r101627
|
|
* coretypes.h (tls_model): Add TLS_MODEL_NONE as 0.
* tree.h (struct tree_decl): New field `tls_model'.
(DECL_TLS_MODEL): New.
(DECL_THREAD_LOCAL_P): Rename from DECL_THREAD_LOCAL, make it
a predicate.
* rtl.h (decl_default_tls_model): Add prototype for it.
* varasm.c (decl_tls_model): Rewritten and renamed to ...
(decl_default_tls_model): ... this.
(default_encode_section_info): Use DECL_TLS_MODEL instead of
decl_tls_model.
(assemble_variable): Replace DECL_THREAD_LOCAL with
DECL_THREAD_LOCAL_P.
(default_section_type_flags_1): Likewise.
(categorize_decl_for_section): Likewise.
* tree.c (staticp): Likewise.
(recompute_tree_invarant_for_addr_expr): Likewise.
* drawf2out (loc_descriptor_from_tree_1): Likewise.
* c-decl.c (diagnose_mismatched_decls): Likewise.
with DECL_THREAD_LOCAL_P.
(start_decl): Likewise.
* print-tree.c (print_node): Likewise. Print the TLS model.
(grokdeclarator): Set the default DECL_TLS_MODEL here.
* c-common.c (handle_tls_model_attribute): Rewrite to set the
TLS model up based on the attribute. Never add the attribute
to the decl's attributes list.
* config/sparc/sol2.h (ASM_DECLARE_OBJECT_NAME): Replace
DECL_THREAD_LOCAL with DECL_THREAD_LOCAL_P.
cp/
* decl.c (start_decl): Replace DECL_THREAD_LOCAL with
DECL_THREAD_LOCAL_P.
(cp_finish_decl): Likewise.
(grokvardecl): Set the default DECL_TLS_MODEL here.
From-SVN: r101465
|
|
From-SVN: r101317
|
|
* rtl.h (to_rtx_code): Remove.
* machmode.h (to_machine_mode): Likewise.
* read-rtl.c (apply_mode_macro): Replace to_machine_mode with
explicit cast.
(apply_mode_maps): Likewise.
(read_rtx_1): Likewise.
(apply_code_macro): Replace to to_rtx_code with explicit cast.
(check_code_macro): Likewise.
(read_rtx_1): Likewise.
From-SVN: r100846
|
|
* machmode.h (to_machine_mode): New.
* rtl.h (to_rtx_code): Likewise.
* read-rtl.c (apply_mode_macro): Convert mode to machine_mode.
(print_c_condition): Convert return value of htab_find().
(apply_code_macro): Add explicit cast when convertin to enums.
(apply_mode_maps): Likewise.
(check_code_macro): Likewise.
(read_rtx_1): Likewise.
From-SVN: r100804
|
|
PR rtl-optimization/21767
* rtl.h (function_invariant_p): Re-add declaration.
* reload1.c (function_invariant_p): No longer static.
* ifcvt.c (dead_or_predicable): Remove REG_EQUAL notes that
might have become invalid.
From-SVN: r100448
|
|
* basic-block.h (REG_BR_PROB_BASE): Define.
* cgraph.c (cgraph_create_edge): Initialize loop_nest and count.
(dump_cgraph_node): Dump count.
(cgraph_clone_edge): Rescale counts.
(cgraph_clone_node): Likewise.
* cgraph.h: Include basic-block.h
(cgraph_node): Add count.
(cgraph_edge): Add count and loop_nest.
(cgraph_node, cgraph_edge, cgraph_clone_edge, cgraph_clone_node):
Update prototypes.
* cgraphunit.c: Kill now redundant inlining comment.
(cgraph_create_edges): Make static, maintain current basic block;
fix pasto.
(record_call_1): Fill in new fields.
* ipa-inline.c (cgraph_clone_inlined_nodes): Update call of
cgraph_clone_node.
(cgraph_decide_recursive_inlining): Likewise.
* rtl.h (REG_BR_PROB_BASE): Kill.
* tree-inline.c (copy_body_r): Update call of cgraph_clone_edge.
(expand_call_inline): Update call of cgraph_create_edge.
* tree-optimize.c (tree_rest_of_compilation): Likewise.
From-SVN: r99976
|
|
setjmpless_size.
* explow.c (allocate_dynamic_stack_space SETJMP_VIA_SAVE_AREA):
Kill setjmpless_size. current_function_calls_setjmp is completely
computed when we are called, so just use the optimized size value
instead of using REG_SAVE_AREA notes.
(optimize_save_area_alloca): Delete....
* rtl.h (optimize_save_area_alloca): Likewise...
* passes.c (rest_of_compilation): and don't call it any more.
* reg-notes.def (SAVE_AREA): Delete.
From-SVN: r98861
|
|
mode is VOIDmode not DImode.
* rtl.h (CONST_DOUBLE): Fix comment, a CONST_DOUBLE holds an
integer when it's mode is VOIDmode not DImode.
From-SVN: r98603
|
|
* predict.h (IS_TAKEN): Remove.
* rtl.h (NOTE_PREDICTION): Likewise.
From-SVN: r98258
|
|
* rtl.h (NOTE_PREDICTION_ALG, NOTE_PREDICTION_FLAGS,
NOTE_PREDICT): Remove.
From-SVN: r98088
|
|
From-SVN: r98087
|
|
From-SVN: r98070
|
|
* emit-rtl.c (reverse_comparison): Remove.
* rtl.h: Remove the corresponding prototype.
From-SVN: r97032
|
|
2005-03-21 Paolo Bonzini <bonzini@gnu.org>
* combine.c (combine_simplify_rtx, simplify_if_then_else,
simplify_logical, if_then_else_cond, known_cond,
simplify_comparison): Adjust calls to reverse_comparison.
Don't use combine_reversed_comparison_code).
(combine_reversed_comparison_code): Remove.
(reversed_comparison): Using reversed_comparison_code, move it...
* jump.c (reversed_comparison): ... here.
* rtl.h (reversed_comparison): Add prototype.
From-SVN: r96801
|
|
2005-03-21 Paolo Bonzini <bonzini@gnu.org>
* rtl.h (struct rtx_hooks): Add gen_lowpart_no_emit.
* rtlhooks.c (gen_lowpart_no_emit_general): New.
* rtlhooks-def.h (gen_lowpart_no_emit_general): Declare.
(RTL_HOOKS_GEN_LOWPART_NO_EMIT): New.
* simplify-rtx.c (simplify_binary_operation_1): Use it.
From-SVN: r96799
|
|
(print_c_condition): Declare.
* read-rtl.c (ptr_loc): New structure.
(ptr_locs, ptr_loc_obstack, joined_conditions)
(joined_conditions_obstack): New variables.
(leading_ptr_hash, leading_ptr_eq_p, set_rtx_ptr_loc)
(get_rtx_ptr_loc, copy_rtx_ptr_loc, print_rtx_ptr_loc)
(join_c_conditions, print_c_condition): New functions.
(apply_macro_to_string): Associate the new string with the same
source location as the old one.
(add_condition_to_string): Use join_c_conditions.
(read_string): Use set_rtx_ptr_loc to record a filename and line
number for the string.
(read_rtx): Initialize the new variables above.
* genattrtab.c (write_test_expr, write_attr_value): Use
print_c_condition.
* genconditions.c (write_header): Don't define MAYBE_EVAL. Move its
comment above the GCC_VERSION check.
(write_one_condition): Use print_rtx_ptr_loc and print_c_condition.
Inline the definition of MAYBE_EVAL.
* genemit.c (gen_expand, gen_split): Use print_rtx_ptr_loc.
* genoutput.c (process_template): Likewise.
* genpreds.c (write_predicate_subfunction): Likewise.
(write_predicate_expr): Use print_c_condition.
* genrecog.c (write_cond): Likewise.
* gensupport.c (process_rtx): Use join_c_conditions to join the
conditions of a define_insn_and_split. Record a source location
for the string after the "&&".
(alter_test_for_insn): Use join_c_conditions.
From-SVN: r95883
|
|
apply_change_group.
* recog.c (verify_changes, confirm_change_group): New functions,
broken out of apply_change_group.
(apply_change_group): Use them.
* recog.h (verify_change, confirm_change_group): Declare.
* rtl.h (redirect_jump_2): Declare.
* jump.c (redirect_exp, invert_exp): Delete.
(invert_exp_1): Take second parameter. Return value. Changed caller.
(redirect_jump_2): New function, broken out of redirect_jump.
(redirect_jump): Use redirect_jump_1 and redirect_jump_2.
(invert_jump): Use invert_jump_1 and redirect_jump_2.
* ifcvt.c (dead_or_predicable): Use redirect_jump_2.
From-SVN: r95813
|
|
* calls.c (emit_call_1): Don't use REG_ALWAYS_RETURN.
(emit_library_call_value_1): Don't use LCT_ALWAYS_RETURN and
REG_ALWAYS_RETURN.
* cfgrtl.c (need_fake_edge_p): Likewise.
* combine.c (distribute_notes): Likewise.
* emit-rtl.c (try_split): Likewise.
* recog.c (peephole2_opimize): Likewise.
* reg-notes.def (ALWAYS_RETURN): Remove.
* rtl.h (LCT_ALWAYS_RETURN): Remove.
* tree-cfg.c (need_fake_edge_p): Don't use ECF_ALWAYS_RETURN.
* tree.h (ECF_ALWAYS_RETURN): Remove.
From-SVN: r95690
|
