aboutsummaryrefslogtreecommitdiff
path: root/gcc/reload1.c
AgeCommit message (Collapse)AuthorFilesLines
2001-07-11alias.c (set_mem_alias_set): New function.Richard Kenner1-4/+4
* alias.c (set_mem_alias_set): New function. * rtl.h (set_mem_alias_set): Declare it. * builtins.c (expand_builtin_return_addr): Call it instead of using MEM_ALIAS_SET accessor. (expand_builtin_setjmp_setup, expand_builtin_longjmp): Likewise. (get_memory_rtx, expand_builtin_va_arg): Likewise. (expand_builtin_va_copy):Likewise. * caller-save.c (setup_save_areas): Likewise. * calls.c (compute_argument_addresses): Likewise. * explow.c (set_mem_attributes): Likewise. * expr.c (emit_single_push_insn, emit_push_insn): Likewise. (expand_assignment, store_constructor_field, store_field): Likewise. (expand_expr_unaligned): Likewise. * function.c (assign_stack_temp_for_type): Likewise. (put_reg_into_stack, gen_mem_addressof): Likewise. * ifcvt.c (noce_try_cmove_arith): Likewise. * reload1.c (reload, alter_reg): Likewise. * config/alpha/alpha.c (get_aligned_mem): Likewise. (alpha_set_memflags_1, alpha_expand_unaligned_load): Likewise. (alpha_expand_unaligned_store): Likewise (alpha_expand_unaligned_load_words): Likewise. (alpha_expand_unaligned_store_words): Likewise. (alpha_expand_block_clear, alpha_expand_prologue): Likewise. (alpha_expand_epilogue): Likewise. * config/arc/arc.c (arc_setup_incoming_varargs): Likewise. * config/clipper/clipper.c (clipper_builtin_saveregs): Likewise. * config/i386/i386.c (legitimize_pic_address): Likewise. * config/i960/i960.c (setup_incoming_varargs): Likewise. * config/ia64/ia64.c (spill_restore_mem): Likewise. * config/m32r/m32r.c (m32r_setup_incoming_varargs): Likewise. * config/m8k/m88k.c (m88k_builtin_saveregs): Likewise. * config/mips/mips.c (mips_va_arg): Likewise. * config/mn10300/mn10300.c (mn10300_builtin_saveregs): Likewise. * config/pa/pa.c (hppa_builtin_saveregs): Likewise. * config/rs6000/rs6000.c (rs6000_emit_move): Likewise. (setup_incoming_varargs, rs6000_va_arg): Likewise. (rs6000_emit_eh_toc_restore, rs6000_emit_prologue): Likewise. (rs6000_emit_epilogue): Likewise. * config/sh/sh.c (sh_builtin_saveregs): Likewise. * config/sparc/sparc.c (sparc_va_arg): Likewise. * config/v850/v850.c (v850_va_arg): Likewise. From-SVN: r43951
2001-07-10reload1.c (merge_assigned_reloads): After a RELOAD_OTHER merge...Stephane Carrez1-3/+3
* reload1.c (merge_assigned_reloads): After a RELOAD_OTHER merge, fix setting of the reloads of that reload to RELOAD_FOR_OTHER_ADDRESS. From-SVN: r43911
2001-07-10regmove.c (replace_in_call_usage): Fix warnings.Jan van Male1-3/+4
2001-07-10 Jan van Male <jan.vanmale@fenk.wau.nl> * regmove.c (replace_in_call_usage): Fix warnings. * sched-deps.c (add_dependence): Fix warnings. * simplify-rtx.c (simplify_subreg): Likewise. Return NULL_RTX instead of NULL. * reg-stack.c (emit_swap_insn): Eliminate warnings. (subst_asm_stack_regs): Likewise. * combine.c (num_sign_bit_copies): Cast bitwidth to int to avoid warnings. * dwarf2out.c (output_call_frame_info): Declare i as int. (build_abbrev_table): Declare n_alloc as int. (dwarf2out_finish): Initialize die. * except.c: Declare sjlj_funcdef_number as unsigned. (connect_post_landing_pads): Declare j as unsigned. (convert_to_eh_region_ranges): Initialize call_site. (output_function_exception_table): Initialize tt_format_size. * expr.c (move_by_pieces_1): Initialize to1. (store_constructor): Initialize minelt and maxelt. * flow.c (mark_regs_live_at_end): Declare i as unsigned. * function.c (instantiate_decls): Avoid signed/unsigned warning. * c-decl.c (combine_parm_decls): Unused, remove. * c-tree.h: Remove prototype for combine_parm_decls. * reload.c (push_reload): Fix warning. (regno_clobbered_p): Likewise. * reload1.c (replace_pseudos_in_call_usage): Likewise. (reload_combine): Likewise. * bitmap.c: Rename bitmap_zero to bitmap_zero_bits to fix warnings. * bitmap.h: Rename bitmap_zero to bitmap_zero_bits to fix warnings. * bitmap.c (bitmap_operation): Change user. * bitmap.h (EXECUTE_IF_AND_COMPL_IN_BITMAP): Likewise. For cp/: 2001-07-10 Jan van Male <jan.vanmale@fenk.wau.nl> * call.c (build_op_delete_call): Initialize fn. (convert_like_real): Delete conditional. (joust): Initialize *w and *l. * class.c: Add prototype for binfo_ctor_vtable. (get_primary_binfo): Initialize result. * init.c (build_java_class_ref): Initialize name. * typeck.c (unary_complex_lvalue): Do not duplicate the argument to modify, pre-, or post-increment when used as an lvalue and when the argument has side-effects. For ch/: 2001-07-10 Jan van Male <jan.vanmale@fenk.wau.nl> * ch-tree.h: Remove prototype for combine_parm_decls, unused function. From-SVN: r43893
2001-07-09expr.h: Adjust prototypes for have_add2_insn, have_sub2_insn.Toon Moene1-2/+2
2001-07-09 Toon Moene <toon@moene.indiv.nluug.nl> * expr.h: Adjust prototypes for have_add2_insn, have_sub2_insn. * optabs.c (have_add2_insn): Check whether the add insn chosen really accepts the operands. (have_sub2_insn): Ditto for sub insn. * reload1.c (reload_cse_move2add): Adjust calls of have_add2_insn. From-SVN: r43874
2001-07-09[multiple changes]Richard Kenner1-16/+5
Mon Jul 9 06:41:07 2001 Richard Kenner <kenner@vlsi1.ultra.nyu.edu> * emit-rtl.c (adjust_address_nv, replace_equiv_address_nv): New fcns. (operand_subword): Use them. (change_address_1): Renamed from change_address; new arg VALIDATE. * expr.h: Reflect above changes; change_address now macro. * alias.c (canon_rtx): Use replace_equiv_address_nv instead of making MEM. * cselib.c (add_mem_for_addr): Likewise. * expr.c (protect_from_queue, emit_move_insn_1): Likewise. * regmove.c (try_apply_stack_adjustment): Likewise. * reload.c (push_reload, make_memloc): Likewise. * reload1.c (eliminate_regs): Likewise. * simplify-rtx.c (simplify_replace_rtx): Likewise. * caller-save.c (setup_save_areas): Use adjust_address_nv instead of adjust_addess. * combine.c (make_extraction, simplify_shift_const): Likewise. (gen_lowpart_for_combine): Likewise. * cse.c (gen_lowpart_if_possible): Likewise. * function.c (fixup_var_refs_1, purge_addressof_1): Likewise. * expr.c (expand_expr, case COMPONENT_REF): Likewise. * optabs.c (gen_move_insn): Likewise. * reload1.c (alter_reg): Likewise. * simplify-rtx.c (simplify_subreg): Likewise. * stmt.c (expand_anon_union_decl): Likewise. * recog.c (validate_replace_rtx_1): Likewise. (expr.h): Include. * Makefile.in (recog.o): Add $(EXPR_H). * explow.c (stabilize): Call replace_equiv_address. * expr.c (move_by_pieces_1, store_by_pieces_2): Likewise. * final.c (alter_subreg): OFFSET is HOST_WIDE_INT. 2001-07-09 Bo Thorsen <bo@suse.co.uk> * config/i386/unix.h (ASM_OUTPUT_MI_THUNK): Fix x86-64 vtable support. 2001-07-09 Neil Booth <neil@daikokuya.demon.co.uk> * final.c (output_addr_const): Use target opening and closing parentheses. * target-def.h: Define TARGET_ASM_OPEN_PAREN, TARGET_ASM_CLOSE_PAREN defaults, add to TARGET_ASM_OUT. * target.h (struct gcc_target): Add open_paren and close_paren. * doc/md.texi: Update. * doc/tm.texi: Document TARGET_ASM_FUNCTION_END_PROLOGUE, TARGET_ASM_FUNCTION_BEGIN_EPILOGUE, TARGET_ASM_OPEN_PAREN and TARGET_ASM_CLOSE_PAREN. * config/i386/i386.c (TARGET_ASM_OPEN_PAREN, TARGET_ASM_CLOSE_PAREN): Override. * config/pdp11/pdp11.c (TARGET_ASM_OPEN_PAREN, TARGET_ASM_CLOSE_PAREN): Override. * config/1750a/1750a.h (ASM_OPEN_PAREN, ASM_CLOSE_PAREN): Remove. * config/a29k/a29k.h: Similarly. * config/alpha/alpha.h: Similarly. * config/arc/arc.h: Similarly. * config/arm/aof.h: Similarly. * config/arm/aout.h: Similarly. * config/avr/avr.h: Similarly. * config/c4x/c4x.h: Similarly. * config/clipper/clipper.h: Similarly. * config/convex/convex.h: Similarly. * config/d30v/d30v.h: Similarly. * config/dsp16xx/dsp16xx.h: Similarly. * config/elxsi/elxsi.h: Similarly. * config/fr30/fr30.h: Similarly. * config/h8300/h8300.h: Similarly. * config/i370/i370.h: Similarly. * config/i386/i386.h: Similarly. * config/i860/i860.h: Similarly. * config/i960/i960.h: Similarly. * config/ia64/ia64.h: Similarly. * config/m32r/m32r.h: Similarly. * config/m68hc11/m68hc11.h: Similarly. * config/m68k/m68k.h: Similarly. * config/m88k/m88k.h: Similarly. * config/mcore/mcore.h: Similarly. * config/mips/mips.h: Similarly. * config/mn10200/mn10200.h: Similarly. * config/mn10300/mn10300.h: Similarly. * config/ns32k/ns32k.h: Similarly. * config/pa/pa.h: Similarly. * config/pdp11/pdp11.h: Similarly. * config/pj/pj.h: Similarly. * config/romp/romp.h: Similarly. * config/rs6000/rs6000.h: Similarly. * config/sh/sh.h: Similarly. * config/sparc/sparc.h: Similarly. * config/v850/v850.h: Similarly. * config/vax/vax.h: Similarly. * config/we32k/we32k.h: Similarly. 2001-07-09 Joseph S. Myers <jsm28@cam.ac.uk> * doc/c-tree.texi: Document representation of attributes. 2001-07-08 Joseph S. Myers <jsm28@cam.ac.uk> * doc/tm.texi: Update some places for the rename of target to targetm. Fix typo. 2001-07-08 Joseph S. Myers <jsm28@cam.ac.uk> * target.h (struct gcc_target): Add insert_attributes. * target-def.h (TARGET_INSERT_ATTRIBUTES): Define. (TARGET_INITIALIZER): Update. * tree.c, tree.h (default_insert_attributes): New function. Update comments on other default functions to refer to targetm, not target. * doc/tm.texi (INSERT_ATTRIBUTES): Update to document TARGET_INSERT_ATTRIBUTES. (SET_DEFAULT_DECL_ATTRIBUTES): Remove. * c-common.c (decl_attributes): Use targetm.insert_attributes. Don't use PRAGMA_INSERT_ATTRIBUTES. * Makefile.in (c-common.o): Depend on $(TARGET_H). * c-decl.c (start_decl, start_function): Don't call SET_DEFAULT_DECL_ATTRIBUTES. * config/c4x/c4x.h (SET_DEFAULT_DECL_ATTRIBUTES): Don't define. * config/c4x/c4x-protos.h (c4x_set_default_attributes): Don't declare. * config/c4x/c4x.c (TARGET_INSERT_ATTRIBUTES): Define. (c4x_check_attribute): Avoid modifying attribute list itself. (c4x_set_default_attributes): Rename to c4x_insert_attributes. Make static. * config/sh/sh.h (PRAGMA_INSERT_ATTRIBUTES): Don't define. * config/sh/sh-protos.h (sh_pragma_insert_attributes): Don't declare. * config/sh/sh.c (TARGET_INSERT_ATTRIBUTES): Define. (sh_pragma_insert_attributes): Rename to sh_insert_attributes. Make static. * config/v850/v850.h (SET_DEFAULT_DECL_ATTRIBUTES): Don't define. * config/v850/v850-protos.h (v850_set_default_decl_attr): Don't declare. * config/v850/v850.c (TARGET_INSERT_ATTRIBUTES): Define. (v850_set_default_decl_attr): Rename to v850_insert_attributes. Adjust parameters. Make static. 2001-07-08 Joseph S. Myers <jsm28@cam.ac.uk> * c-common.c (decl_attributes): Only take a single attributes parameter. * c-common.h (decl_attributes): Update prototype. * c-decl.c (start_decl, start_function): Only take a single attributes parameter. Update calls to decl_attributes. (finish_struct, finish_enum): Update calls to decl_attributes. (push_parm_decl): Expect unified list of attributes. Update call to decl_attributes. * c-parse.in (fndef, initdcl, notype_initdcl, nested_function, notype_nested_function, component_declarator, component_notype_declarator, label): Update calls to decl_attributes. (absdcl_maybe_attribute, parm, firstparm, myparm): Unify attribute lists that are passed to push_parm_decl. * c-tree.h (start_function, start_decl): Update prototypes. * config/sh/sh-protos.h, config/sh/sh.c (sh_pragma_insert_attributes): Only take a single attributes parameter. * config/sh/sh.h (PRAGMA_INSERT_ATTRIBUTES): Likewise. * doc/tm.texi (INSERT_ATTRIBUTES): Update. * objc/objc-act.c (define_decl, generate_objc_symtab_decl, build_module_descriptor, generate_static_references, generate_strings, build_selector_translation_table, generate_descriptor_table, generate_protocols, generate_ivars_list, generate_dispatch_table, generate_protocol_list, generate_category, generate_shared_structures, really_start_method, add_objc_decls, generate_classref_translation_entry): Update calls to start_decl and start_function. (build_tmp_function_decl, start_method_def): Unify attribute lists that are passed to push_parm_decl. 2001-07-08 Neil Booth <neil@daikokuya.demon.co.uk> * final.c (no_asm_to_stream): New. (final_scan_insn): Use target structures for prologue ends and epilogue starts. * output.h (no_asm_to_stream): New. * target-def.h (TARGET_ASM_FUNCTION_END_PROLOGUE, TARGET_ASM_FUNCTION_BEGIN_EPILOGUE): New. (TARGET_ASM_OUT): Update. * target.h (struct gcc_target): New members function_end_prologue and function_begin_epilogue. * config/1750/1750.h (ASM_OUTPUT_FUNNAM): Delete as unused. * config/alpha/alpha-protos.h (output_end_prologue): Delete. * config/alpha/alpha.c (output_end_prologue): Rename to alpha_output_function_end_prologue. Use in target struct and make static. * config/alpha/alpha.h (FUNCTION_END_PROLOGUE): Delete. * config/ia64/ia64-protos.h (ia64_output_end_prologue): Delete. * config/ia64/ia64.c (ia64_output_end_prologue): Rename to ia64_output_function_end_prologue. Use in target struct and make static. (ia64_function_prologue, ia64_funciton_epilogue): Rename mistyped prototypes. * config/ia64/ia64.h (FUNCTION_END_PROLOGUE): Delete. * config/m88k/m88k-protos.h (m88k_end_prologue, m88k_begin_epilogue): Delete. * config/m88k/m88k.c (m88k_end_prologue, m88k_begin_epilogue): Rename an use in target struct, make static. * config/ia64/ia64.h (FUNCTION_END_PROLOGUE, FUNCTION_BEGIN_EPILOGUE): Delete. 2001-07-08 Richard Henderson <rth@redhat.com> * stmt.c (emit_case_nodes): Convert modes properly in low+high test. 2001-07-08 Richard Henderson <rth@redhat.com> * config/i386/i386.md: Remove constraints strings from define_split and define_peephole2 patterns. (eh_return_si, eh_return_di): Split eh_return_1 for modes. (eh_return): Use them. 2001-07-08 Richard Henderson <rth@redhat.com> * doc/tm.texi (Exception Handling): New subnode of Stack and Calling. Document MD_FALLBACK_FRAME_STATE_FOR. 2001-07-07 Stephane Carrez <Stephane.Carrez@worldnet.fr> * config/m68hc11/m68hc11.c (m68hc11_initial_elimination_offset): Take into account m68hc11_sp_correction for FRAME_POINTER_REGNUM elimination. * config/m68hc11/m68hc11.h (STARTING_FRAME_OFFSET): Use 0. 2001-07-07 Nick Clifton <nickc@cambridge.redhat.com> * config/ia64/sysv4.h (ASM_OUTPUT_LABELREF): Append # to end of the label inside NAME as opposed to just the end of NAME. 2001-07-07 Neil Booth <neil@daikokuya.demon.co.uk> * config/alpha/alpha-protos.h (vms_valid_decl_attribute_p): Delete. * config/alpha/alpha.c (alpha_init_machine_status, alpha_mark_machine_status, alpha_free_machine_status): Delete. (TARGET_VALID_DECL_ATTRIBUTE): Define for VMS. (vms_valid_decl_attribute_p): Make static, conditionally compile. * config/alpha/alpha.h (VALID_MACHINE_DECL_ATTRIBUTE): Delete. 2001-07-06 Stan Shebs <shebs@apple.com> * target.h (targetm): Rename global from "target", so as not to conflict with local variables. * c-decl.c: Ditto. * c-typeck.c: Ditto. * final.c: Ditto. * tree.c: Ditto. * cp/decl.c: Ditto. * cp/decl2.c: Ditto. * cp/typeck.c: Ditto. * 1750a/1750a.c: Ditto. * a29k/a29k.c: Ditto. * arc/arc.c: Ditto. * arm/arm.c: Ditto. * avr/avr.c: Ditto. * clipper/clipper.c: Ditto. * convex/convex.c: Ditto. * d30v/d30v.c: Ditto. * dsp16xx/dsp16xx.c: Ditto. * elxsi/elxsi.c: Ditto. * fr30/fr30.c: Ditto. * h8300/h8300.c: Ditto. * i370/i370.c: Ditto. * i386/i386.c: Ditto. * i860/i860.c: Ditto. * i960/i960.c: Ditto. * ia64/ia64.c: Ditto. * m32r/m32r.c: Ditto. * m68hc11/m68hc11.c: Ditto. * m68k/m68k.c: Ditto. * m88k/m88k.c: Ditto. * mips/mips.c: Ditto. * ns32k/ns32k.c: Ditto. * pa/pa.c: Ditto. * pdp11/pdp11.c: Ditto. * romp/romp.c: Ditto. * rs6000/rs6000.c: Ditto. * sh/sh.c: Ditto. * sparc/sparc.c: Ditto. * vax/vax.c: Ditto. * we32k/we32k.c: Ditto. * doc/tm.texi: Update the manual to match. 2001-07-06 Richard Henderson <rth@redhat.com> * except.h (MUST_USE_SJLJ_EXCEPTIONS): Examine the value of DWARF2_UNWIND_INFO not just whether it is defined. 2001-07-06 Diego Novillo <dnovillo@redhat.com> * combine.c (combine_simplify_rtx): Also recompute 'mode' if the call to simplify_binary_operation returns a new pattern. 2001-07-06 Roman Lechtchinsky <rl@cs.tu-berlin.de> * glimits.h (__SHRT_MAX__): New. (SHRT_MIN, USHRT_MAX): Define in terms of SHRT_MAX. (SHRT_MAX): Define in terms of __SHRT_MAX__. 2001-07-06 Jan van Male <jan.vanmale@fenk.wau.nl> * alias.c (base_alias_check): Cast GET_MODE_UNIT_SIZE to int to avoid warnings. 2001-07-06 Richard Henderson <rth@redhat.com> * bitmap.c (bitmap_release_memory): Move adjacent to the allocation functions. (bitmap_first_set_bit, bitmap_last_set_bit): Streamline knowing the implementation. Binary search for the set bit. (bitmap_union_of_diff): Allocate the temporary on the stack instead of using xmalloc. 2001-07-06 Richard Henderson <rth@redhat.com> * genrecog.c (validate_pattern): Warn for constraints in define_{expand,split,peephole2}. Remove strict_low_part before looking up match_dup. 2001-07-06 DJ Delorie <dj@redhat.com> * doc/gcc.texi (Makefile): Rename to be a more general purpose chapter about various build hints and history. Add section talking about the various types of native and cross builds. 2001-07-06 Neil Booth <neil@daikokuya.demon.co.uk> * Makefile.in (final.o): Depend on target.h. * final.c: Include target.h. (default_function_pro_epilogue): New. (final_start_function): Use target structure for function prologues. (final_end_function): Use target structure for function epilogues. * fold-const.c (real_hex_to_f): Constify s and p. * output.h (default_function_pro_epilogue): New. * real.h (real_hex_to_f): Update prototype. * target-def.h (TARGET_ASM_FUNCTION_PROLOGUE, TARGET_ASM_FUNCTION_EPILOGUE, TARGET_ASM_OUT): New. (TARGET_INITIALIZER): Update. * target.h (gcc_target): Add struct asm_out. * doc/tm.texi: Update. config: Update each arch to use TARGET_ASM_FUNCTION_PROLOGUE and TARGET_ASM_FUNCTION_EPILOGUE. Move macro code to functions in cpu/cpu.c, or rename old functions consistently. Take a HOST_WIDE INT not an int as the SIZE parameter. Remove now redundant macros and prototypes. Make new functions static. * 1750a/1750a.c: Similarly. * 1750a/1750a.h: Similarly. * a29k/a29k-protos.h: Similarly. * a29k/a29k.c: Similarly. * a29k/a29k.h: Similarly. * arc/arc-protos.h: Similarly. * arc/arc.c: Similarly. * arc/arc.h: Similarly. * arm/arm-protos.h: Similarly. * arm/arm.c: Similarly. * arm/arm.h: Similarly. * avr/avr-protos.h: Similarly. * avr/avr.c: Similarly. * avr/avr.h: Similarly. * clipper/clipper-protos.h: Similarly. * clipper/clipper.c: Similarly. * clipper/clipper.h: Similarly. * convex/convex.c: Similarly. * convex/convex.h: Similarly. * d30v/d30v-protos.h: Similarly. * d30v/d30v.c: Similarly. * d30v/d30v.h: Similarly. * d30v/d30v.md: Similarly. * dsp16xx/dsp16xx-protos.h: Similarly. * dsp16xx/dsp16xx.c: Similarly. * dsp16xx/dsp16xx.h: Similarly. * elxsi/elxsi.c: Similarly. * elxsi/elxsi.h: Similarly. * fr30/fr30.c: Similarly. * fr30/fr30.md: Similarly. * h8300/h8300-protos.h: Similarly. * h8300/h8300.c: Similarly. * h8300/h8300.h: Similarly. * i370/i370-protos.h: Similarly. * i370/i370.c: Similarly. * i370/i370.h: Similarly. * i386/i386.c: Similarly. * i386/osf1elf.h: Similarly. * i386/osfrose.h: Similarly. * i860/i860-protos.h: Similarly. * i860/i860.c: Similarly. * i860/i860.h: Similarly. * i960/i960-protos.h: Similarly. * i960/i960.c: Similarly. * i960/i960.h: Similarly. * ia64/ia64-protos.h: Similarly. * ia64/ia64.c: Similarly. * ia64/ia64.h: Similarly. * m32r/m32r-protos.h: Similarly. * m32r/m32r.c: Similarly. * m32r/m32r.h: Similarly. * m68hc11/m68hc11-protos.h: Similarly. * m68hc11/m68hc11.c: Similarly. * m68hc11/m68hc11.h: Similarly. * m68k/crds.h: Similarly. * m68k/dpx2.h: Similarly. * m68k/m68k-protos.h: Similarly. * m68k/m68k.c: Similarly. * m68k/m68k.h: Similarly. * m68k/news.h: Similarly. * m88k/m88k-protos.h: Similarly. * m88k/m88k.c: Similarly. * m88k/m88k.h: Similarly. * mips/mips-protos.h: Similarly. * mips/mips.c: Similarly. * mips/mips.h: Similarly. * ns32k/merlin.h: Similarly. * ns32k/ns32k.c: Similarly. * ns32k/ns32k.h: Similarly. * ns32k/tek6000.h: Similarly. * pa/pa-protos.h: Similarly. * pa/pa.c: Similarly. * pa/pa.h: Similarly. * pdp11/2bsd.h: Similarly. * pdp11/pdp11-protos.h: Similarly. * pdp11/pdp11.c: Similarly. * pdp11/pdp11.h: Similarly. * romp/romp-protos.h: Similarly. * romp/romp.c: Similarly. * romp/romp.h: Similarly. * rs6000/rs6000-protos.h: Similarly. * rs6000/rs6000.c: Similarly. * rs6000/rs6000.h: Similarly. * rs6000/sysv4.h: Similarly. * sh/sh-protos.h: Similarly. * sh/sh.c: Similarly. * sh/sh.h: Similarly. * sparc/sparc-protos.h: Similarly. * sparc/sparc.c: Similarly. * sparc/sparc.h: Similarly. * vax/vax.c: Similarly. * vax/vax.h: Similarly. * vax/vms.h: Similarly. * we32k/we32k.c: Similarly. * we32k/we32k.h: Similarly. Fri Jul 6 11:47:59 2001 Jeffrey A Law (law@cygnus.com) * basic-block.h (first_insn_after_basic_block_note): Declare. * flow.c (first_insn_after_basic_block_note): Define. Moved from... * ssa.c (first_insn_after_basic_block_note): Remove. * ssa-dce.c (find_inherently_necessary): Consider BARRIERs necessary. (ssa_eliminate_dead_code): Properly update the CFG and PHI nodes when we find a dead conditional branch. Insert BARRIERs after any blocks with no successors, but which do not have any BARRIERs. 2001-07-06 Zack Weinberg <zackw@stanford.edu> * varray.c (varray_check_failed): Use internal_error. 2001-07-05 Andrew Haley <aph@redhat.com> * Makefile.in (LIB2_DIVMOD_FUNCS): New. (LIB2FUNCS): Move divmod functions to LIB2_DIVMOD_FUNCS. * mklibgcc.in: Compile LIB2_DIVMOD_FUNCS. 2001-07-02 Jason Merrill <jason_merrill@redhat.com> * dwarf2out.c (mem_loc_descriptor): Only look through a constant pool reference if the target constant is also a SYMBOL_REF. 2001-07-05 Eric Christopher <echristo@redhat.com> * config/mips/mips.h (MASK_MIPS3900): Remove. (MASK_MIPS16,MASK_NO_CHECK_ZERO_DIV,MASK_CHECK_RANGE_DIV, MASK_UNINIT_CONST_IN_RODATA): Change for 3900 mask removal. (TARGET_MIPS3900): Change to use mips_arch. (TARGET_MIPS4000): New. (TARGET_MIPS4100): New. (TARGET_MIPS4300): New. (TARGET_SWITCHES): Change 3900 and 4650 options to NULL. (SUBTARGET_TARGET_OPTIONS): Add -march. Change help text for -mipsX. (GENERATE_BRANCHLIKELY): Move TARGET_MIPS3900. (ISA_HAS_BRANCHLIKELY): To here. (CC1_CPU_SPEC): New. (CC1_SPEC): Use here. Remove 4650 and 3900 options. (mips_arch_string): Declare. (mips_arch): Declare. (TARGET_OPTIONS): Add -march and -mtune. * config/mips/mips.c (mips_arch_string): New. (mips_arch): New. (override_options): Handle -march for codegen and -mtune for scheduling. Use mips_arch. Move tx39 target default here. (mips_parse_cpu): Move error message to override_options. * config/mips/r3900.h (TARGET_DEFAULT): Remove. * config/mips/mips.md: Use TARGET_MIPS4000 and TARGET_MIPS4300. * doc/invoke.texi (Option Summary): Add -march and -mtune entries. (MIPS Options): Ditto. Change mcpu entry to historical text. 2001-07-05 H.J. Lu (hjl@gnu.org) * config/mips/mips.c (mips_parse_cpu): New function to parse -march=*/-mcpu=*. 2001-07-05 Jim Wilson <wilson@redhat.com> * config/ia64/lib1funcs.asm: Revert 2001-07-02 change. * config/ia64/t-ia64: Likewise. (LIB1ASMFUNCS): Update comment. 2001-07-05 David Edelsohn <edelsohn@gnu.org> * doc/install.texi (Install GCC: Binaries): Fix typo. 2001-07-04 Stephane Carrez <Stephane.Carrez@worldnet.fr> * config/m68hc11/m68hc11.md ("*ashlsi3"): Operand 1 can be a memory reference using the stack pointer, adjust it since we push Y temporarily. ("*ashrsi3"): Likewise. ("*lshrsi3"): Likewise. 2001-07-05 Stephane Carrez <Stephane.Carrez@worldnet.fr> * config/m68hc11/m68hc11.h (RETURN_ADDR_RTX): Fix return address when -fomit-frame-pointer is used. 2001-07-05 Jeffrey Oldham <oldham@codesourcery.com> * flow.c: Reverse Jan Hubicka's patch of 02July2001. (try_redirect_by_replacing_jump): Reverse updating properly the count and frequency information. Reverse removing cc0 setter. (forwarder_block_p): Reverse fixing for fallthru blocks. 2001-07-05 DJ Delorie <dj@redhat.com> * gcc.c (TARGET_OPTION_TRANSLATE_TABLE): New. (translate_options): If the above is defined, use it to map given options to new options. * doc/tm.texi: Document it. 2001-07-05 Brad Lucier <lucier@math.purdue.edu> Gerald Pfeifer <pfeifer@dbai.tuwien.ac.at> * doc/invoke.texi (Optimize Options): Document that -fgcse may cause programs using computed gotos to run more slowly. 2001-07-05 Rainer Orth <ro@TechFak.Uni-Bielefeld.DE> * doc/install.texi (Specific): Markup, spelling and typo fixes. Fixed sorting. Consistently require binutils 2.11.2, not prereleases. (Specific, decstation-*): Canonicalize as mips-dec-*. (Specific, i?86-*-sco3.2v5*): Remove make bootstrap requirement, always necessary. (Specific, m68k-altos): Removed reference to README.altos, deleted. (Specific, mips-*): Reword MIPS C compiler requirements. (Specific, powerpc*-*-*): New, mention --with-cpu once. (Specific, sunv5): Removed, obsolete. 2001-07-05 Nathan Sidwell <nathan@codesourcery.com> * dwarf2out.c (output_loc_list): Use an all ones mask for .text asm output and don't rely on long long literals. Reformat some long lines. 2001-07-05 Andreas Jaeger <aj@suse.de> * doc/gcc.texi (GNU/Linux): Remove accidental re-add of GPL section. 2001-07-04 Daniel Berlin <dan@cgsoftware.com> * dwarf2out.c (dwarf2out_define): Update comment. (dwarf2out_undef): Ditto. (dwarf2out_start_source_file): Ditto. (dwarf2out_end_source_file): Ditto. (dwarf2out_finish): Output DW_MACINFO_end_file for primary file, since we never call the start/end debug hook for the primary file. 2001-07-04 Kazu Hirata <kazu@hxi.com> * config/h8300/h8300.c (get_shift_alg): Remove an extra operand from shll. 2001-07-04 Nathan Sidwell <nathan@codesourcery.com> * cppinit.c (remove_dup_dirs): Inform if a system include directory is being reordered. * doc/invoke.texi (Directory Options): GCC warns if you hide a system include. * doc/cpp.texi (Search Paths): Likewise. * doc/gcc.texi (Interoperation): Remove information about -I/usr/include. 2001-07-04 Nathan Sidwell <nathan@codesourcery.com> * varray.h (VARRAY_TOP_GENERIC_PTR): Remove spurious parameter. (VARRAY_TOP_CHAR_PTR): Likewise. 2001-07-04 Kaveh R. Ghazi <ghazi@caip.rutgers.edu> * gcc.c (process_command): Don't assign elements of a const char*. Wed Jul 4 13:40:02 2001 Richard Kenner <kenner@vlsi1.ultra.nyu.edu> * emit-rtl.c (change_address): Don't abort if invalid address while reload is in progress. 2001-07-04 Daniel Berlin <dan@cgsoftware.com> * c-lex.c (cb_file_change): Pass line number to debug_start_source_file. (cb_undefine): Pass correct line number to debug_undef. * toplev.c (debug_start_source_file): Add line number to parameters. Pass it along to dwarf2out_start_source_file. (decode_g_option): Stop resetting debug level back to normal when we change debug formats, unless the current level is none. (Before, -g3 -gdwarf-2 would use debug level 2, rather than 3). * toplev.h (debug_start_source_file): Add line number to parameters. * dwarf2out.h (dwarf2out_start_source_file): Add line number to parameters. * dwarf2out.c (dwarf2out_start_source_file): Add line number to parameters. Output debug_macinfo data for starting file if requested. (dwarf2out_end_source_file): Output debug_macinfo data for ending file if requested. (dwarf2out_define): Output debug_macinfo data for defining a macro if requested. (dwarf2out_undef): Output debug_macinfo data for undefining a macro if requested. (DEBUG_MACINFO_SECTION): New. DWARF2 macro info section name. (DEBUG_MACINFO_SECTION_LABEL): New. DWARF2 macro info section label. (macinfo_section_label): New. DWARF2 macro info section label. (dwarf2out_init): If we want macro info, output the start label for the section. (dwarf2out_finish): If we want macro info, add a DW_AT_macro_info attribute to the compilation unit die pointing to the macro info. 2001-07-04 Daniel Berlin <dan@cgsoftware.com> * dwarf2out.c (new_loc_list): Move to inside #ifdef DWARF2_DEBUGGING_INFO. (add_loc_descr_to_loc_list): Ditto. (output_loc_list): Ditto. Also, fix thinko in curr not being initialized. (gen_internal_sym): Ditto. Wed Jul 4 13:40:02 2001 Richard Kenner <kenner@vlsi1.ultra.nyu.edu> * emit-rtl.c (replace_equiv_address): New function. * expr.h (replace_equiv_address): New declaration. * explow.c (validize_mem): Call it instead of change_address and also call if -fforce-addr and address is constant. * expr.c: Replace more calls to change_address with adjust_address and/or replace_equiv_address or to validize_mem. * function.c, regmove.c, config/alpha/alpha.c: Likewise. * config/arm/arm.md, config/clipper/clipper.md: Likewise. * config/dsp16xx/dsp16xx.md, config/fr30/fr30.c: Likewise. * config/i370/i370.md, config/i860/i860.md: Likewise. * config/i960/i960.md, config/mips/mips.c: Likewise. * config/mips/mips.md, config/pa/pa.md: Likewise. * config/pdp11/pdp11.md, config/rs6000/rs6000.c: Likewise. * config/rs6000/rs6000.md, config/sh/sh.md: Likewise. 2001-07-04 Kaveh R. Ghazi <ghazi@caip.rutgers.edu> * bitmap.c (bitmap_union_of_diff): Don't use BITMAP_ALLOCA. * bitmap.h (BITMAP_ALLOCA): Don't pass alloca as an argument to a function. 2001-07-04 Joseph S. Myers <jsm28@cam.ac.uk> * doc/include: New directory. * doc/fdl.texi: Move to doc/include/fdl.texi. * doc/texinfo.tex: Move to doc/include/texinfo.tex. * doc/include/funding.texi, doc/include/gpl.texi: New files. * doc/gcc.texi: Use funding.texi and gpl.texi. * Makefile.in ($(docdir)/cpp.info, $(docdir)/gcc.info, $(docdir)/cppinternals.info, cpp.dvi. gcc.dvi. cppinternals.dvi): Update dependencies and use -I $(docdir)/include. 2001-07-04 Anthony Green <green@redhat.com> * config/v850/t-v850 (v850-c.o): Add missing dependencies. 2001-07-04 Gerald Pfeifer <pfeifer@dbai.tuwien.ac.at> * doc/install.texi (sparc64-*-*): Remove garbage. Wed Jul 4 09:07:44 2001 Jan van Male <jan.vanmale@fenk.wau.nl> * i386.c (ix86_expand_builtin, case IX86_BUILTIN_SETPS): Fix typo in last change to use adjust_address. 2001-07-04 Gerald Pfeifer <pfeifer@dbai.tuwien.ac.at> * doc/install.texi (Specific): Update information for *-*-solaris*. Tue Jul 3 22:33:15 2001 Richard Kenner <kenner@vlsi1.ultra.nyu.edu> * explow.c (plus_constant_wide): Reinitialize Y for restart. 2001-07-03 Stan Shebs <shebs@apple.com> * config/darwin.h (SECTION_FUNCTION): Remove WAS_TEXT argument, remove case for flag_no_mach_text_sections. (EXTRA_SECTION_FUNCTIONS): Remove arg from uses of SECTION_FUNCTION. * config/darwin.c (flag_no_mach_text_sections): Remove. * config/darwin-protos.h (darwin_init_pragma): Remove decl. Tue Jul 3 15:35:52 2001 Richard Kenner <kenner@vlsi1.ultra.nyu.edu> * explow.c (plus_constant_wide, case PLUS): Call find_constant_term and avoid checking for constant as first operand. * recog.c (find_constant_term_loc): No longer static. (adj_offettable_operand): Delete. * rtl.h (adj_offsettable_operand): Delete declaration. (find_constant_term): Add declaration. * caller-save.c: Replace calls to adj_offsettable_operand with calls to adjust_address. * config/arm/arm.c, config/c4x/c4x.c: Likewise. * config/clipper/clipper.md, config/h8300/h8300.c: Likewise. * config/i386/i386.c, config/i386/i386.md: Likewise. * config/i860/i860.c, config/i960/i960.c: Likewise. * config/i960/i960.md, config/m68hc11/m68hc11.c: Likewise. * config/m68k/m68k.c, config/m68k/m68k.md: Likewise. * config/m88k/m88k.md, config/mcore/mcore.c: Likewise. * config/mips/mips.c, config/mips/mips.md: Likewise. * config/mn10200/mn10200.c, config/mn10300/mn10300.c: Likewise. * config/ns32k/ns32k.c, config/ns32k/ns32k.md: Likewise. * config/pa/pa.c, config/pdp11/pdp11.c: Likewise. * config/pdp11/pdp11.md, config/sh/sh.c, config/v850/v850.c: Likewise. * config/vax/vax.md, config/ns32k/ns32k.c: Likewise. * config/ns32k/ns32k.md: Likewise. 2001-07-03 Zack Weinberg <zackw@stanford.edu> * rtl.c (copy_rtx): Handle 'T' format letter. * gensupport.c (collect_insn_data): Likewise. * print-rtl.c (print_rtx): Print 'T' slots like 's'. 2001-07-03 Nick Clifton <nickc@cambridge.redhat.com> * doc/invoke.texi (Directory Options): Specifiy range for <N> in -B option. Use 'dir' not 'foo' as example directory name. 2001-07-03 Rainer Orth <ro@TechFak.Uni-Bielefeld.DE> * config/i386/sol2.h (ASM_PREFERRED_EH_DATA_FORMAT): Define. Fixes PRs bootstrap/3067, bootstrap/3249, bootstrap/3275. 2001-07-03 Joseph S. Myers <jsm28@cam.ac.uk> * doc/cppinternals.texi: Improve formatting and logical markup. 2001-07-03 Andreas Jaeger <aj@suse.de> * Makefile.in (insn-recog.o): Add dependency on reload.h. * genrecog.c (write_header): Include reload.h for prototypes in insn-recog.c. 2001-07-03 Neil Booth <neil@daikokuya.demon.co.uk> config: * i386/cygwin.h (VALID_MACHINE_DECL_ATTRIBUTE, VALID_MACHINE_TYPE_ATTRIBUTE): Remove. * i386/i386-protos.h (i386_pe_valid_decl_attribute_p, i386_pe_valid_type_attribute_p): Add. * i386/i386.c (TARGET_INITIALIZER): Override for cygwin targets. * i386/winnt.c (i386_valid_decl_attribute_p): Return directly. Mon Jul 2 21:52:19 2001 Richard Kenner <kenner@vlsi1.ultra.nyu.edu> * explow.c (plus_constant_wide, case LO_SUM): New case. (plus_constant_for_output_wide): Delete. * rtl.h (plus_constant_for_output): Delete. * alias.c (canon_rtx, init_alias_analysis): Call plus_constant instead of plus_constant_for_output. * recog.c (offsettable_address_p, adj_offsettable_operand): Likewise. * config/darwin.c, config/arm/arm.c, config/m68k/m68k.c: Likewise. * config/m88k/m88k.c, config/mips/mips.c, config/pa/pa.c: Likewise. * config/rs6000/rs6000.c, config/sparc/sparc.c: Likewise. * config/sparc/sparc.md: Likewise. Convert some change_address calls to adjust_address. 2001-07-03 Joseph S. Myers <jsm28@cam.ac.uk> * doc/extend.texi, doc/gcc.texi, doc/invoke.texi, doc/md.texi, doc/rtl.texi, doc/tm.texi: Improve formatting. Improve documentation of -std and -Wwrite-strings. 2001-07-02 Geoffrey Keating <geoffk@redhat.com> * cse.c (canon_hash): Don't register registers in very small register classes, as extending their lifetime might cause reload to fail. Mon Jul 2 23:14:00 CEST 2001 Jan Hubicka <jh@suse.cz> * flow.c (try_redirect_by_replacing_jump): Remove cc0 setter. * flow.c (forwarder_block_p): Fix for fallthru blocks. (try_redirect_by_replacing_jump): Update properly the count and frequency information. Mon Jul 2 14:20:13 2001 Jeffrey A Law (law@cygnus.com) * toplev.c (dump_file_index): Move SSA dumps just after first jump dump. (dump_file): Corresponding changes. (rest_of_compilation): Move SSA path to just after the first jump pass. * doc/gcc.texi (Passes): Update due to movement of SSA path. * doc/invoke.texi: Update dump file #s as they were completely out of date with reality. 2001-07-02 Geoffrey Keating <geoffk@redhat.com> * doc/tm.texi (Frame Layout): Document STACK_PUSH_CODE. * expr.c (emit_move_insn_1): Deal with non-default STACK_PUSH_CODE. * expr.c (emit_single_push_insn): Fix warning. 2001-07-02 Toshiyasu Morita <toshiyasu.morita@hsa.hitachi.com> * expr.c (emit_move_insn_1): Avoid modifying cfun->expr->x_stack_pointer when PUSH_ROUNDING is defined. Mon Jul 2 15:33:31 2001 Richard Kenner <kenner@vlsi1.ultra.nyu.edu> * emit-rtl.c (adjust_address): New function. * expr.h (adjust_address): Add declaration. * builtins.c: Replace some calls to change_address with calls to it or to validize_mem. * caller-save.c, dwarf2out.c, except.c, expmed.c, expr.c: Likewise. * function.c, config/a29k/a29k.md, config/alpha/alpha.c: Likewise. * config/arm/arm.c, config/convex/convex.c: Likewise. * config/dsp16xx/dsp16xx.md, config/fr30/fr30.c: Likewise. * config/i386/i386.c, config/i386/i386.md: Likewise. * config/ia64/ia64.c, config/ia64/ia64.md: Likewise. * config/m32r/m32r.c, config/m68k/m68k.md: Likewise. * config/m88k/m88k.c, config/mips/mips.md: Likewise. * config/ns32k/ns32k.c, config/rs6000/rs6000.c: Likewise. * config/sh/sh.c, config/sparc/sparc.md: Likewise. 2001-07-02 Jim Wilson <wilson@redhat.com> * config/ia64/ia64.h: Delete obsolete lib1funcs.asm comment. 2001-07-02 Steve Ellcey <sje@cup.hp.com> * config/ia64/t-ia64: Change LIB1ASMFUNCS to use single underscore. * config/ia64/lib1funcs.asm: Change macro names to match t-ia64. 2001-07-02 Zack Weinberg <zackw@stanford.edu> * cppinit.c (lang_defaults): New table. (set_lang): Just read from lang_defaults into the live options structure. 2001-07-02 Zack Weinberg <zackw@stanford.edu> * Makefile.in (doc): Depend on $(GENERATED_MANPAGES). * doc/.cvsignore: Add gcc.1, cpp.1, gcov.1. * doc/gcc.1, doc/cpp.1, doc/gcov.1: Removed. 2001-07-02 Rainer Orth <ro@TechFak.Uni-Bielefeld.DE> * doc/install.texi: Various spelling and markup fixes. (Installing GCC): Component specific installation instructions are gone. Fix reference. Warn about removing old install dir in the presence of shared libs. (Configuration): Invoke with options target to match configure --help. Consistently refer to gas, gld pathnames. Invert --enable-multilib documentation. Remove references to old compiler versions. Mon Jul 2 12:50:51 2001 Richard Kenner <kenner@vlsi1.ultra.nyu.edu> * flow.c (try_simplify_condjump): Fix typo in updating fallthru flags. 2001-07-02 Rainer Orth <ro@TechFak.Uni-Bielefeld.DE> * doc/install.texi (Specific, mips*-sgi-irix4): Split from IRIX 5 section. (Specific, mips*-sgi-irix5): Note IDO download. Reworded MIPS C hints. Use GNU as instead of GAS. Markup fixes. Removed SGI Freeware reference, IRIX 6 only. (Specific, mips*-sgi-irix6): Removed ranlib caveats, obsolete. Note N64 library requirement/workaround. Update O32 hints. Complete list of structure passing bug victims. 2001-07-02 Gerald Pfeifer <pfeifer@dbai.tuwien.ac.at> * doc/install.texi: Remove CVS Id. 2001-07-02 Andreas Jaeger <aj@suse.de> * ssa-dce.c (note_inherently_necessary_set): Add unused attribute. (find_inherently_necessary): Remove unused variable. 2001-07-02 Nathan Sidwell <nathan@codesourcery.com> * c-common.h (TDI_inlined): New ast dump phase. (dump_flag_name): New function. * c-dump.c (dump_files): Add inlined phase. (dump_flag_name): Define. * doc/invoke.texi (-fdump-ast-inlined): Document. Mon Jul 2 06:29:36 2001 Richard Kenner <kenner@vlsi1.ultra.nyu.edu> * stor-layout.c (layout_decl): Revert change to handling of alignment in packed types. Sun Jul 1 11:53:52 2001 Richard Kenner <kenner@vlsi1.ultra.nyu.edu> * c-common.c (decl_attributes, case A_MODE): Don't call layout_decl for FIELD_DECL. 2001-07-01 Geoffrey Keating <geoffk@redhat.com> * doc/tm.texi (FUNCTION_ARG): Document that the last call is special. 2001-07-01 Nathan Sidwell <nathan@codesourcery.com> * tlink.c (recompile_files): Remove COMPILER_PATH and LIBRARY_PATH from the environment. 2001-07-01 Zack Weinberg <zackw@stanford.edu> * c-common.h (enum rid): Add RID_FIRST_AT, RID_LAST_AT, RID_LAST_PQ. Move RID_FIRST_PQ down with the other FIRST/LAST enumerators. (OBJC_IS_AT_KEYWORD, OBJC_IS_PQ_KEYWORD): New macros. * c-parse.in (OBJC_STRING): Kill. (objc_string): Decompose to [objc_string] '@' STRING. (reswords): Take the leading '@' off all the Objective C keywords. (objc_rid_sans_at): Kill. (init_reswords): Don't initialize it. (yylexname): Use OBJC_IS_AT_KEYWORD and OBJC_IS_PQ_KEYWORD. (_yylex): Kill reconsider label. Look ahead one token after an '@'; if we get an identifier, check whether it's an Objective C @-keyword. If so, return the keyword. Otherwise, put back the token and return the '@' as a terminal. * cpplib.c (lex_macro_node): Remove unnecessary check for leading '@' on identifier. Clarify control flow and commentary. Sun Jul 1 11:53:52 2001 Richard Kenner <kenner@vlsi1.ultra.nyu.edu> * cse.c (new_label_ref): Variable deleted. (insert): Remove set of new_label_ref. (check_for_label_ref): New function. (cse_basic_block): Don't check new_label_ref; call check_for_label_ref. See ChangeLog.5 for earlier changes. From-SVN: r43861
2001-06-22regs.h (struct reg_info_def): Add freq field.Jan Hubicka1-5/+5
* regs.h (struct reg_info_def): Add freq field. (REG_N_REFS): Update comment. (REG_FREQ): New. * regclass.c (scan_one_insn): Update REG_FREQ. * flow.c (mark_set_1): Update REG_FREQ, make REG_N_SETS unweighted. (attempt_auto_inc): Likewise. (mark_used_reg): Likewise. (try_pre_increment_1): Likewise. * local-alloc.c (struct qty): Add freq field. (alloc_qty): Set freq. (update_equiv_regs): Set REG_FREQ. (QTY_CMP_PRI): Use freq. (combine_regs): Update qty->freq. * global.c (struct allocno): Update comment for n_refs; add freq field. (local_reg_freq): New array. (global_alloc): Update freq field; allocate and initialize local_reg_freq. (allocno_compare): Use freq field. (find_reg): Likewise. * reload1.c (count_pseudo): Use freq isntead of n_refs. (count_spilled_pseudo): Likewise. * tm.texi (GCOV_TYPE_SIZE): Document. * basic-block.h (gcov_type): Define. (struct edge_def): Use gcov_type for count field. (struct basic_block_def): Likewise. * defaults.h (GCOV_TYPE_SIZE): Define. * final.c (end_final): Use GCOV_TYPE_SIZE. * flow.c (dump_edge_info, dump_flow_info, dump_bb): Print count fields using HOST_WIDEST_INT_PRINT_DEC. * gcov-io.h (__fetch_gcov_type, __store_gcov_type, __read_gcov_type, __write_gcov_type): New. (store_long): Remove. * gcov.c (gcov_type): Set default. (struct adj_list): Use gcov_type for arc_count. (bb_info): Use gcov_type for succ_count, pred_count and exec_count. (create_program_flow_graph): Read arc_count properly. (solve_program_flow_graph): 'total' is gcov_type. (output_data): Line_counts is gcov_type, print it properly. * libgcc2.c (struct bb): Counts is gcov_type. (__bb_exit_func): Use __read_gcov_type and __write_gcov_type. * profile.c (LONG_TYPE_SIZE, LONG_LONG_TYPE_SIZE): Set default. (GCOV_TYPE_SIZE): Define. (struct bb_info): succ_count and pred_count is gcov_type. (compute_branch_probabilities): Use __read_gcov_type, print read edges to the dump file. (total): Is gcov_type. (gen_edge_profiler): Use GCOV_TYPE_SIZE. From-SVN: r43505
2001-06-06reload1.c (reload): Revert Schmidt's change so all USEs are not deleted ↵Jeffrey D. Oldham1-1/+1
during reload. 2001-06-05 Jeffrey D. Oldham <oldham@codesourcery.com> * reload1.c (reload): Revert Schmidt's change so all USEs are not deleted during reload. From-SVN: r42935
2001-06-05print-rtl.c (xspaces): Remove.Mark Mitchell1-1/+1
* print-rtl.c (xspaces): Remove. (print_rtx): Use printf field-width, rather than xpsaces, to indent. * toplev.c (main): Disable sibling-call optimization if we are handling exceptions. * reload1.c (reload): Delete all USEs generated during reload. From-SVN: r42917
2001-06-03Minor whitespace editsRichard Kenner1-2/+3
From-SVN: r42840
2001-05-17Correctly count substitutions if eliminations are going on.Bernd Schmidt1-4/+7
From-SVN: r42198
2001-05-08reload1.c (copy_eh_notes): New function.Andrew Haley1-1/+28
2001-05-03 Andrew Haley <aph@cambridge.redhat.com> * reload1.c (copy_eh_notes): New function. (emit_input_reload_insns): Call it. (emit_output_reload_insns): Call it. From-SVN: r41918
2001-05-02c-lex.c: NULL_PTR -> NULL.Kaveh R. Ghazi1-5/+4
* c-lex.c: NULL_PTR -> NULL. * cse.c: Likewise. * emit-rtl.c: Likewise. * gcse.c: Likewise. * genpeep.c: Likewise. * jump.c: Likewise. * mips-tdump.c: Likewise. * reload1.c: Likewise. * rtlanal.c: Likewise. * stmt.c: Likewise. * stor-layout.c: Likewise. * toplev.c: Likewise. From-SVN: r41761
2001-05-01bitmap.c: Change NULL_PTR to NULL or "(rtx*)0".Kaveh R. Ghazi1-1/+1
* bitmap.c: Change NULL_PTR to NULL or "(rtx*)0". * c-common.c: Likewise. * c-decl.c: Likewise. * combine.c: Likewise. * rs6000.c: Likewise. * except.c: Likewise. * explow.c: Likewise. * expr.c: Likewise. * fold-const.c: Likewise. * function.c: Likewise. * gcc.c: Likewise. * gcse.c: Likewise. * integrate.c: Likewise. * loop.c: Likewise. * objc/objc-act.c: Likewise. * recog.c: Likewise. * reg-stack.c: Likewise. * reload.c: Likewise. * reload1.c: Likewise. * simplify-rtx.c: Likewise. * stmt.c: Likewise. * varasm.c: Likewise. From-SVN: r41722
2001-04-03Use byte offsets in SUBREGs instead of words.Jakub Jelinek1-23/+28
2001-04-03 Jakub Jelinek <jakub@redhat.com> David S. Miller <davem@pierdol.cobaltmicro.com> Andrew MacLeod <amacleod@redhat.com> Use byte offsets in SUBREGs instead of words. * alias.c (nonlocal_mentioned_p): Use subreg_regno function. * caller-save.c (mark_set_regs): Change callers of subreg_hard_regno to pass new argument. (add_stored_regs): Use subreg_regno_offset function. * calls.c (expand_call): For non-paradoxical SUBREG take endianess into account. (precompute_arguments): Use gen_lowpart_SUBREG. * combine.c (try_combine): Replace explicit XEXP with SUBREG_REG. (combine_simplify_rtx): Rework to use SUBREG_BYTE. (simplify_set): Rework to use SUBREG_BYTE. (expand_field_assignment): Use SUBREG_BYTE. (make_extraction): Use SUBREG_BYTE. (if_then_else_cond): Use SUBREG_BYTE. (apply_distributive_law): Use SUBREG_BYTE and fixup subreg comments. (gen_lowpart_for_combine): Compute full byte offset. * cse.c (mention_regs): Use SUBREG_BYTE. (remove_invalid_subreg_refs): Rework to use SUBREG_BYTE. (canon_hash): Use SUBREG_BYTE. (fold_rtx): Pass SUBREG_BYTE div UNITS_PER_WORD to operand_subword. (gen_lowpart_if_possible): Formatting. * dbxout.c (dbxout_symbol_location): Compute SUBREG hard regnos correctly. * dwarf2out.c (is_pseudo_reg): Fixup explicit XEXP into SUBREG_REG (mem_loc_descriptor): Fixup explicit XEXP into SUBREG_REG (loc_descriptor): Fixup explicit XEXP into SUBREG_REG * dwarfout.c (is_pseudo_reg): Fixup explicit XEXP into SUBREG_REG (output_mem_loc_descriptor): Fixup explicit XEXP into SUBREG_REG (output_loc_descriptor): Fixup explicit XEXP into SUBREG_REG * emit-rtl.c (gen_rtx_SUBREG): New function, used to verify certain invariants about SUBREGs the compiler creates. (gen_lowpart_SUBREG): New function. (subreg_hard_regno): New function to get the final register number. (gen_lowpart_common): Use SUBREG_BYTE. (gen_imagpart): Spacing nits. (subreg_realpart_p): Use SUBREG_BYTE. (gen_highpart): Use SUBREG_BYTE. (subreg_lowpart_p): Always compute endian corrected goal offset, even at the byte level, then compare against that. (constant_subword): New function, pulled out all constant cases from operand_subword and changed second argument name to offset. (operand_subword): Detect non REG/SUBREG/CONCAT/MEM cases early and call constant_subword to do the work. Return const0_rtx if looking for a word outside of OP. (operand_subword_force): Change second arg name to offset. * expmed.c (store_bit_field): Use SUBREG_BYTE. (store_split_bit_field): Use SUBREG_BYTE. (extract_bit_field): Use SUBREG_BYTE. (extract_split_bit_field): Use SUBREG_BYTE. (expand_shift): Use SUBREG_BYTE. * expr.c (store_expr, expand_expr): Use gen_lowpart_SUBREG. * final.c (alter_subreg) Use subreg_hard_regno and SUBREG_BYTE. * flow.c (set_noop_p): Use SUBREG_BYTE. (mark_set_1): Remove ALTER_HARD_SUBREG. Use subreg_regno_offset instead. * function.c (fixup_var_refs_1): Fixup explicit XEXP into a SUBREG_REG. (fixup_memory_subreg): Use SUBREG_BYTE and remove byte endian correction code. (optimize_bit_field): Use SUBREG_BYTE. (purge_addressof_1): Use SUBREG_BYTE. (purge_single_hard_subreg_set): Use subreg_regno_offset function. (assign_params): Mark arguments SUBREG_PROMOTED_VAR_P if they are actually promoted by the caller and PROMOTE_FOR_CALLS_ONLY is true. * gengenrtl.c (special_rtx): Add SUBREG. * global.c (mark_reg_store): Use SUBREG_BYTE. (set_preference): Rework to use subreg_regno_offset and SUBREG_BYTE. * ifcvt (noce_emit_move_insn): Use SUBREG_BYTE. * integrate.c (copy_rtx_and_substitute): Use SUBREG_BYTE and make sure final byte offset is congruent to subreg's mode size. (subst_constants): Use SUBREG_BYTE. (mark_stores): Use subreg_regno_offset function. * jump.c (rtx_renumbered_equal_p, true_regnum): Use subreg_regno_offset function and SUBREG_BYTE. * local-alloc.c (combine_regs): Use subreg_regno_offset function. (reg_is_born): Use subreg_hard_regno. * recog.c (valid_replace_rtx_1): Use SUBREG_BYTE and remove byte endian correction code. Don't combine subregs unless resulting offset aligns with type. Fix subreg constant extraction for DImode. Simplify SUBREG of VOIDmode CONST_DOUBLE. (general_operand): Remove dead mode_altering_drug code. (indirect_operand): Use SUBREG_BYTE. (constrain_operands): Use subreg_regno_offset function. * reg-stack.c (get_true_reg): Use subreg_regno_offset function. * regmove.c (regmove_optimize): Use SUBREG_BYTE. (optimize_reg_copy_3): Use gen_lowpart_SUBREG. * regs.h (REG_SIZE): Allow target to override. (REGMODE_NATURAL_SIZE): New macro which target can override. * reload.c (reload_inner_reg_of_subreg): subreg_regno should be used on the entire subreg rtx. (push_reload): Use SUBREG_BYTE in comments and code. (find_dummy_reload): Use subreg_regno_offset. Only adjust offsets for hard registers inside subregs. (operands_match_p): Use subreg_regno_offset. (find_reloads): Use SUBREG_BYTE and only advance offset for subregs containing hard regs. (find_reload_toplev): Use SUBREG_BYTE. Remove byte endian corrections when fixing up MEM subregs. (find_reloads_address_1): Use SUBREG_BYTE, subreg_regno, and subreg_regno_offset where appropriate. (find_reloads_subreg_address): Use SUBREG_BYTE. Remove byte endian corrections when fixing up MEM subregs. (subst_reloads): When combining two subregs, make sure final offset is congruent to subreg's mode size. (find_replacement): Use SUBREG_BYTE and subreg_regno_offset. (refers_to_regno_for_reload_p): Use subreg_regno. (reg_overlap_mentioned_for_reload_p): Use subreg_regno_offset. * reload1.c (eliminate_regs) Use SUBREG_BYTE. Remove byte endian correction code for memory subreg fixups. (forget_old_reload_1): Use subreg_regno_offset. (choose_reload_regs): Use subreg_regno. (emit_input_reload_insns): Use SUBREG_BYTE. (reload_combine_note_store): Use subreg_regno_offset. (move2add_note_store): Use subreg_regno_offset. * resource.c (update_live_status, mark_referenced_resources): Use subreg_regno function. (mark_set_resources): Use subreg_regno function. * rtl.h (SUBREG_WORD): Rename to SUBREG_BYTE. (subreg_regno_offset, subreg_regno): Define prototypes. (subreg_hard_regno, constant_subword, gen_rtx_SUBREG): Newi functions. (gen_lowpart_SUBREG): Add prototype. * rtl.texi (subreg): Update to reflect new byte offset representation. Add mentioning of the effect that BYTES_BIG_ENDIAN has on subregs now. * rtlanal.c (refers_to_regno_p): Use subreg_regno. (reg_overlap_mentioned_p): Use subreg_regno. (replace_regs); Make sure final offset of combined subreg is congruent to size of subreg's mode. (subreg_regno_offset): New function. (subreg_regno): New function. * sched-vis.c (print_value): Change SUBREG_WORD to SUBREG_BYTE. * sdbout.c (sdbout_symbol): Compute offset using alter_subreg. * stmt.c (expand_anon_union_decl): Use gen_lowpart_SUBREG. * tm.texi (ALTER_HARD_SUBREG): Remove, it is now dead. (SUBREG_REGNO_OFFSET): Describe SUBREG_REGNO_OFFSET overrides. * config/a29k/a29k.c (gpc_reg_operand): Use subreg_regno. (a29k_get_reloaded_address): Use SUBREG_BYTE. (print_operand): Use SUBREG_BYTE. * config/alpha/alpha.c (print_operand_address): Use SUBREG_BYTE. * config/arm/arm.c (arm_reload_in_hi): Use SUBREG_BYTE. (arm_reload_out_hi): Use SUBREG_BYTE. * config/d30v/d30v.c (d30v_split_double): Use subreg_regno_offset instead of SUBREG_WORD. (d30v_print_operand_memory_reference): Use subreg_regno_offset. * config/dsp16xx/dsp16xx.md (extendqihi2, zero_extendqihi2): Fix SUBREG creation to use byte offset. * config/h8300/h8300.md (Unnamed HImode zero extraction and 16bit inverted load insns): Fix explicit rtl subregs to use byte offsets. * config/i370/i370.md (cmpstrsi, movstrsi, mulsi3, divsi3, udivsi3, umodsi3): Generate SUBREGs with byte offsets. * config/i860/i860.c (single_insn_src_p): Use SUBREG_BYTE. * config/i860/i860.md (mulsi3_big): Fixup explicit SUBREGs in rtl to use byte offsets. (unnamed fmlow.dd insn): Fixup SUBREGS to use byte offsets. * config/i960/i960.md (extendhisi2): Generate SUBREGs with byte offsets, also make sure it is congruent to SUBREG's mode size. (extendqisi2, extendqihi2, zero_extendhisi2, zero_extendqisi2, unnamed ldob insn): Generate SUBREGs with byte offset. (zero_extendqihi2): SUBREG's are byte offsets. * config/m68hc11/m68hc11.c (m68hc11_gen_lowpart): Use SUBREG_BYTE. (m68hc11_gen_highpart): Use SUBREG_BYTE. * config/m68k/m68k.md (zero_extendhisi2, zero_extendqihi2, zero-extendqisi2): Generate SUBREGs with byte offset. (umulsidi3, mulsidi3, subreghi1ashrdi_const32, subregsi1ashrdi_const32, subreg1lshrdi_const32): Fixup explicit subregs in rtl to use byte offsets. * config/m88k/m88k.md (extendsidi2): fixup subregs to use byte offset. * config/mips/mips.c (mips_move_1word): Use subreg_regno_offset. (mips_move_2words): Use subreg_regno_offset. (mips_secondary_reload_class): Use subreg_regno_offset. * config/mips/mips.md (DImode plus, minus, move, and logical op splits): Fixup explicit subregs in rtl to use byte offsets. * config/mn10200/mn10200.c (print_operand): Use subreg_regno function. * config/mn10300/mn10300.c (print_operand): Use subreg_regno function. * config/ns32k/ns32k.md (udivmoddisi4): Fix explicit subregs in rtl to use byte offsets. * config/pa/pa.c (emit_move_sequence): Use SUBREG_BYTE. * config/pa/pa.md (floatunssisf2, floatunssidf2, mulsi3): fix explicit subregs to use byte offsets. * config/pdp11/pdp11.md (zero_extendhisi2, modhi3, modhi3+1): Fixup explicit subregs in rtl to use byte offsets. * config/romp/romp.c (memory_offset_in_range_p): Use SUBREG_BYTE and remove byte endian correction code. * config/sh/sh.c (output_movedouble): Use subreg_regno. (gen_ashift_hi): Use SUBREG_BYTE. (regs_used): Use subreg_regno_offset. (machine_dependent_reorg): Use subreg_regno_offset. * config/sh/sh.h (INDEX_REGISTER_RTX_P): Use SUBREG_BYTE. * config/sh/sh.md (DImode and DFmode move splits): Use subreg_regno. (movdf_i4): Subregs are byte offsets now. * config/sparc/sparc.c (ultra_find_type): Use SUBREG_BYTE. * config/sparc/sparc.h (ALTER_HARD_SUBREG): Removed. (REGMODE_NATURAL_SIZE): Override. (REG_SIZE): For SUBREG check float mode on SUBREG_REG's mode. * config/sparc/sparc.md (TFmode move splits): Generate SUBREGs with byte offsets. (zero_extendhisi2, zero_extendqidi2_insn, extendhisi2, extendqihi2, sign_extendqihi2_insn, sign_extendqisi2_insn, extendqidi2): Generate SUBREGs with byte offsets, also make sure it is congruent to SUBREG's mode size. (smulsi3_highpart_v8plus): Fix explicit subregs in rtl to use byte offsets. (cmp_siqi_trunc, cmp_siqi_trunc_set, cmp_diqi_trunc, cmp_diqi_trunc_set, lshrdi3_v8plus+1, lshrdi3_v8plus+2, lshrdi3_v8plus+3, lshrdi3_v8plus+4): Use proper SUBREG_BYTE offset for non-paradoxical subregs in patterns. * config/v850/v850.c (print_operand, output_move_double): Use subreg_regno function. Co-Authored-By: Andrew MacLeod <amacleod@redhat.com> Co-Authored-By: David S. Miller <davem@pierdol.cobaltmicro.com> From-SVN: r41058
2001-03-28* reload1.c (eliminate_regs): Don't abort on MEM USEs.John David Anglin1-0/+6
From-SVN: r40887
2001-03-22mkconfig.sh: Include insn-flags.h.Richard Henderson1-2/+0
* mkconfig.sh: Include insn-flags.h. * Makefile.in (CONFIG_H): Include insn-flags.h. (lots of objects): Remove insn-codes.h and insn-flags.h. * alias.c, bb-reorder.c, calls.c, do-loop.c, flow.c, haifa-sched.c, integrate.c, jump.c, loop.c, predict.c, profile.c, reg-stack.c, regmove.c, reorg.c, a29k/a29k.c, alpha/alpha.c, arc/arc.c, arm/arm.c, avr/avr.c, clipper/clipper.c, convex/convex.c, d30v/d30v.c, dsp16xx/dsp16xx.c, fr30/fr30.c, h8300/h8300.c, i370/i370.c, i386/i386.c, i860/i860.c, ia64/ia64.c, m32r/m32r.c, m68hc11/m68hc11.c, m68k/m68k.c, m88k/m88k.c, mcore/mcore.c, mn10200/mn10200.c, mn10300/mn10300.c, ns32k/ns32k.c, pa/pa.c, pdp11/pdp11.c, pj/pj.c, romp/romp.c, rs6000/rs6000.c, sh/sh.c, sparc/sparc.c, v850/v850.c, vax/vax.c: Don't include insn-flags.h. * diagnostic.c, expr.h, reload.c, toplev.c: Don't include insn-codes.h. * builtins.c, combine.c, except.c, explow.c, expmed.c, expr.c, final.c, function.c, optabs.c, recog.c, reload1.c, stmt.c, c4x/c4x.c, i960/i960.c, mips/mips.c: Don't include insn-codes.h or insn-flags.h. * genemit.c, genopinit.c, genoutput.c: Don't include insn-codes.h or insn-flags.h in the generated code. * genflags.c (gen_proto): Use "struct rtx_def *" instead of "rtx". (main): Forward declare struct rtx_def. From-SVN: r40754
2001-03-15reload1.c (reload_cse_simplify_set): For LOAD_EXTEND_OP, do not "widen" a ↵Jeffrey A Law1-3/+7
destination that is already wider than a word. * reload1.c (reload_cse_simplify_set): For LOAD_EXTEND_OP, do not "widen" a destination that is already wider than a word. Also do not widen if LOAD_EXTEND_OP is NIL for the given mode. From-SVN: r40510
2001-03-12Call reload_cse_simplify_set before reload_cse_noop_set_pAldy Hernandez1-4/+9
From-SVN: r40394
2001-03-01Fix register elimination problemBernd Schmidt1-0/+1
From-SVN: r40147
2001-02-18* reload1.c (reload_cse_simplify_set): Fix typo.Richard Henderson1-1/+1
From-SVN: r39836
2001-02-17reload1.c (reload_cse_simplify_set): Respect LOAD_EXTEND_OP when replacing a ↵Richard Henderson1-15/+79
memory load with a register. * reload1.c (reload_cse_simplify_set): Respect LOAD_EXTEND_OP when replacing a memory load with a register. From-SVN: r39805
2001-01-25reload1.c (reload_reg_free_for_value_p): New parameter start_regno.J"orn Rennecke1-10/+21
* reload1.c (reload_reg_free_for_value_p): New parameter start_regno. Changed all callers. Take it into account when deciding if a previously loaded value matches. From-SVN: r39251
2001-01-19reload1.c (move2add_note_store): Treat all registers about which no ↵Alexandre Oliva1-91/+146
information is known as potential bases... * reload1.c (move2add_note_store): Treat all registers about which no information is known as potential bases, and treat all registers directly or indirectly derived from it as members of the same set of values. (reload_cse_move2add): Adjust accordingly. Take mode and offset of base register into account. From-SVN: r39135
2001-01-13reload1.c (replace_pseudos_in_call_usage): Use reg_equiv_constant and ↵Alexandre Oliva1-5/+12
reg_equiv_address, and don't try regno_reg_rtx first. * reload1.c (replace_pseudos_in_call_usage): Use reg_equiv_constant and reg_equiv_address, and don't try regno_reg_rtx first. From-SVN: r38991
2001-01-13reload1.c: Add prototype for replace_pseudos_in_call_usage.Andreas Jaeger1-5/+8
* reload1.c: Add prototype for replace_pseudos_in_call_usage. * regmove.c: Add prototype for replace_in_call_usage. From-SVN: r38985
2001-01-12calls.c (emit_library_call_value_1): Add USEs and CLOBBERs to function usage ↵Alexandre Oliva1-0/+62
for arguments passed by reference. * calls.c (emit_library_call_value_1): Add USEs and CLOBBERs to function usage for arguments passed by reference. Optimize callee-copied arguments. * regmove.c (find_related_toplev): Find uses in function usage. (replace_in_call_usage): New function. (fixup_match_1): Call it. * cse.c (cse_insn): Canonicalize registers in function usage. * reload1.c (replace_pseudos_in_call_usage): New function. (reload): Call it. From-SVN: r38964
2001-01-11reload1.c (move2add_note_store): Update reg_set_luid even if base reg ↵J"orn Rennecke1-4/+2
remains the same. * reload1.c (move2add_note_store): Update reg_set_luid even if base reg remains the same. From-SVN: r38891
2001-01-07reload.c (subst_reloads): Take INSN argument.Alexandre Oliva1-1/+1
* reload.c (subst_reloads): Take INSN argument. When replacing a LABEL_REF in a JUMP_INSN, add a REG_LABEL note. * reload.h (subst_reloads): Adjust prototype. * reload1.c (reload_as_needed): Pass INSN to subst_reloads. * jump.c (mark_all_labels): Canonicalize any REG_LABEL notes present in JUMP_INSNs and copy them to JUMP_LABEL. * flow.c (find_label_refs, find_basic_blocks_1): Skip JUMP_INSNs and insns with REG_LABELs that are followed by JUMP_INSNs with the same REG_LABEL. * sched-rgn.c (is_cfg_nonregular): Likewise. * rtlanal.c (computed_jump_p): Make it false if a REG_LABEL note is available. * unroll.c (unroll_loop): Look for REG_LABEL notes in JUMP_INSNs too. * rtl.texi (REG_LABEL): Document usage in JUMP_INSNs. From-SVN: r38755
2001-01-02tm.texi (REGISTER_MOVE_COST): Add a mode argument.Alexandre Oliva1-6/+8
* tm.texi (REGISTER_MOVE_COST): Add a mode argument. * reload.c (REGISTER_MOVE_COST): Likewise. Adjust all callers. * reload1.c (REGISTER_MOVE_COST): Likewise. * regclass.c (REGISTER_MOVE_COST): Likewise. (move_cost, may_move_in_cost, may_move_out_cost): Add mode dimension. Adjust all users. (init_reg_sets_1): Iterate on all modes. * config/1750a/1750a.h (REGISTER_MOVE_COST): Adjust. * config/a29k/a29k.h (REGISTER_MOVE_COST): Adjust. * config/alpha/alpha.h (REGISTER_MOVE_COST): Adjust. * config/arc/arc.h (REGISTER_MOVE_COST): Adjust. * config/arm/arm.h (REGISTER_MOVE_COST): Adjust. * config/avr/avr.h (REGISTER_MOVE_COST): Adjust. * config/c4x/c4x.h (REGISTER_MOVE_COST): Adjust. * config/d30v/d30v.h (REGISTER_MOVE_COST): Adjust. * config/dsp16xx/dsp16xx.h (REGISTER_MOVE_COST): Adjust. * config/h8300/h8300.h (REGISTER_MOVE_COST): Adjust. * config/i386/i386.h (REGISTER_MOVE_COST): Adjust. * config/ia64/ia64.h (REGISTER_MOVE_COST): Adjust. * config/m32r/m32r.h (REGISTER_MOVE_COST): Adjust. * config/m68hc11/m68hc11.h (REGISTER_MOVE_COST): Adjust. * config/m68k/m68k.h (REGISTER_MOVE_COST): Adjust. * config/mcore/mcore.h (REGISTER_MOVE_COST): Adjust. * config/mips/mips.h (REGISTER_MOVE_COST): Adjust. * config/mn10200/mn10200.h (REGISTER_MOVE_COST): Adjust. * config/mn10300/mn10300.h (REGISTER_MOVE_COST): Adjust. * config/ns32k/ns32k.h (REGISTER_MOVE_COST): Adjust. * config/pa/pa.h (REGISTER_MOVE_COST): Adjust. * config/pdp11/pdp11.h (REGISTER_MOVE_COST): Adjust. * config/pj/pj.h (REGISTER_MOVE_COST): Adjust. * config/romp/romp.h (REGISTER_MOVE_COST): Adjust. * config/rs6000/rs6000.h (REGISTER_MOVE_COST): Adjust. * config/sh/sh.h (REGISTER_MOVE_COST): Adjust. * config/sparc/sparc.h (REGISTER_MOVE_COST): Adjust. From-SVN: r38604
2000-12-19reload1.c (reload_combine): Take multi-hard-regs into account when ↵Catherine Moore1-12/+19
processing CALL_INSN_FUNCTION_USAGE. * reload1.c (reload_combine): Take multi-hard-regs into account when processing CALL_INSN_FUNCTION_USAGE. From-SVN: r38379
2000-12-02Fix multi-reg inheritance problems (only a fix small additional fix for ↵Bernd Schmidt1-1/+1
yesterday's accidental checkin) From-SVN: r37946
2000-12-01Add a frontend function for reload_reg_free_for_value_p; need to check allBernd Schmidt1-50/+68
registers in a multi-reg value. From-SVN: r37916
2000-11-27Handle frame sizes larger than int.Jim Wilson1-1/+1
* reload1.c (reload): Use HOST_WIDE_INT for old_frame_size. From-SVN: r37809
2000-11-27In cselib, do not consider constants with different modes equivalent.Bernd Schmidt1-3/+6
From-SVN: r37792
2000-11-24Fix code that substitutes reloadreg into SET_DEST of previous insn.Bernd Schmidt1-0/+17
From-SVN: r37711
2000-11-14reload1.c (emit_input_reload_insns): Honour forcing of constants into memory ↵Jakub Jelinek1-1/+4
by PREFERRED_RELOAD_CLASS NO_REGS. * reload1.c (emit_input_reload_insns): Honour forcing of constants into memory by PREFERRED_RELOAD_CLASS NO_REGS. From-SVN: r37450
2000-11-12* reload1.c (set_label_offsets): Go inside of PARALLELs.Jakub Jelinek1-3/+4
From-SVN: r37409
2000-11-10Several fixes to make reload handle POST_MODIFY correctly.Bernd Schmidt1-20/+39
From-SVN: r37370
2000-11-10alpha.c (check_float_value): Use memcpy, not bcopy.Kaveh R. Ghazi1-8/+8
* alpha.c (check_float_value): Use memcpy, not bcopy. * arm.c (output_move_double): Likewise. * arm.md: Likewise. * m88k.c (legitimize_operand): Likewise. * m88k.h (ORDER_REGS_FOR_LOCAL_ALLOC): Likewise. * m88k.md: Likewise. * mips.c (override_options): Likewise. * mips.md: Likewise. * romp.c (output_fpops): Likewise. * rs6000.c (rs6000_override_options): Likewise. * sh.md: Likewise. * vax.c (check_float_value): Likewise. * emit-rtl.c (copy_rtx_if_shared, init_emit_once): Likewise. * expmed.c (synth_mult): Likewise. * final.c (add_bb_string): Likewise. * genattr.c (main): Likewise. * genattrtab.c (attr_string, simplify_cond, copy_rtx_unchanging): Likewise. * jump.c (thread_jumps): Likewise. * prefix.c (save_string): Likewise. * real.h (REAL_VALUE_FROM_CONST_DOUBLE): Likewise. * regclass.c (init_reg_sets, init_reg_sets_1): Likewise. * reload1.c (reload, eliminate_regs): Likewise. cp: * decl.c (grokdeclarator, save_function_data): Use memcpy, not bcopy. * lex.c (copy_lang_decl): Likewise. java: * decl.c (copy_lang_decl): Use memcpy, not bcopy. * jcf-parse.c (jcf_figure_file_type): Likewise. From-SVN: r37367
2000-11-09reload1.c (reload_combine): Fixed calculation of first_index_reg, ↵Matthew Hiller1-3/+3
last_index_reg. * reload1.c (reload_combine): Fixed calculation of first_index_reg, last_index_reg. From-SVN: r37360
2000-11-07alias.c [...] (init_alias_analysis, [...]): Use memset () instead of bzero ().Joseph Myers1-12/+12
* alias.c (init_alias_analysis), calls.c (expand_call, emit_library_call_value_1), combine.c (init_reg_last_arrays), cse.c (new_basic_block), dbxout.c (dbxout_type), diagnostic.c (init_output_buffer, set_diagnostic_context), dwarf2out.c (equate_decl_number_to_die, build_abbrev_table), emit-rtl.c (init_emit_once), fold-const.c (mul_double, div_and_round_double), function.c (assign_parms), gcse.c (compute_can_copy, alloc_gcse_mem, alloc_reg_set_mem, record_one_set, compute_hash_table, compute_set_hash_table, compute_expr_hash_table), genattrtab.c (optimize_attrs), global.c (global_alloc, global_conflicts), haifa-sched.c (compute_trg_info, clear_units, schedule_block), integrate.c (initialize_for_inline, expand_inline_function), jump.c (thread_jumps), local-alloc.c (local_alloc), loop.c (combine_movables, count_loop_regs_set, load_mems_and_recount_loop_regs_set), print-tree.c (debug_tree), regclass.c (init_reg_sets, init_reg_sets_1, regclass, record_reg_classes, allocate_reg_info), reload.c (get_secondary_mem, remove_address_replacements, find_reloads), reload1.c (reload, set_initial_label_offsets, finish_spills, reload_as_needed, choose_reload_regs_init, reload_cse_simplify_operands), reorg.c (dbr_schedule), sbitmap.c (sbitmap_zero), simplify-rtx.c (simplify_plus_minus), ssa.c (rename_registers), stmt.c (expand_end_case), unroll.c (unroll_loop), varray.c (varray_grow), objc/objc-act.c: Use memset () instead of bzero (). ch: * actions.c (check_missing_cases), typeck.c (build_chill_slice, build_chill_cast): Use memset () instead of bzero (). cp: * class.c (duplicate_tag_error, build_vtbl_initializer), decl.c (push_binding_level), error.c (cp_tree_printer), pt.c (process_partial_specialization, tsubst_template_arg_vector), search.c (lookup_member): Use memset () instead of bzero (). java: * expr.c (note_instructions), jcf-io.c (find_class), jcf-parse.c (init_outgoing_cpool), lex.c (java_init_lex): Use memset () instead of bzero (). From-SVN: r37303
2000-11-06reload1.c (eliminate_regs_in_insn): Allow a set to be a PARALLEL with ↵J"orn Rennecke1-4/+15
(clobber (match_scratch...)). * reload1.c (eliminate_regs_in_insn): Allow a set to be a PARALLEL with (clobber (match_scratch...)). From-SVN: r37281
2000-10-28Never set reload_override_in for optional reloads.Bernd Schmidt1-5/+10
From-SVN: r37103
2000-10-23reload1.c (reload_reg_reaches_end_p): A RELOAD_OTHER can overwrite the value ↵Geoff Keating1-5/+7
in a RELOAD_FOR_INPUT and other kinds of... * reload1.c (reload_reg_reaches_end_p): A RELOAD_OTHER can overwrite the value in a RELOAD_FOR_INPUT and other kinds of reloads just like an RELOAD_FOR_OUTPUT would. From-SVN: r37019
2000-10-17reload1.c (move2add_note_store): Check for simple auto-inc in destination.Joern Rennecke1-0/+14
* reload1.c (move2add_note_store): Check for simple auto-inc in destination. From-SVN: r36923
2000-10-13Remove obstacks.Mark Mitchell1-6/+0
* Makefile.in (ggc-callbacks.o): Remove target. (flow.o): Depend on GGC_H. * alias.c (init_alias_analysis): Remove ggc_p conditionals. (end_alias_analysis): Likewise. * basic-block.h (init_flow): New function. (allocate_reg_life_data): Declare. * bb-reorder.c (function_obstack): Replace with ... (flow_obstack): ... new variable. (fixup_reorder_chain): Use it. * c-decl.c (ggc_p): Remove. (caller-save.c): Don't call oballoc/obfree. * combine.c (struct undobuf): Remove storage. (try_combine): Don't call oballoc. (undo_all): Don't call obfree. * cse.c (insert): Use xmalloc, not oballoc. (cse_main): Adjust accordingly. * dwarf2out.c (save_rtx): Remove obstack code. (dwarf2out_init): Remove ggc_p conditionals. * emit-rtl.c (rtl_obstack): Remove. (gen_rtx_CONST_INT): Remove ggc_p conditionals. (make_insn_raw): Likewise. (emit_insn_before): Likewise. (emit_insn_after): Likewise. (emit_insn): Likewise. (gen_sequence): Likewise. (copy_insn_1): Remove handling of `b' RTL components. (init_emit_once): Remove ggc_p conditionals. * except.c (create_rethrow_ref): Don't fool with obstacks. (add_partial_entry): Likewise. (call_get_eh_context): Likewise. (begin_protect_partials): Likewise. (protect_with_terminate): Likewise. * explow.c (plus_constant_wide): Likewise. * expr.c (init_expr_once): Likewise. (emit_block_move): Likewise. (clear_storage): Likewise. (expand_expr): Likewise. * flow.c (function_obstack): Remove. (flow_obstack): New variable. (flow_firstobj): Likewise. (create_base_block): Use the flow_obstack. (split_block): Likewise. (split_edge): Likewise. (calculate_global_regs_live): Likewise. (allocate_bb_life_data): Make it static. Likewiwse. (init_flow): New function. (size_int_type_wide): Remove ggc_p conditionals. * function.c (push_function_context_to): Don't call save_tree_status. (pop_function_context_from): Or restore_tree_status. (assign_stack_local_1): Don't call push_obstacks. (find_fixup_replacement): Use xmalloc. (fixup_var_refs_insns): Free the storage. (insns_for_mem_walk): Don't mess with obstacks. (instantiate_decls): Likewise. (trampoline_address): Likewise. (expand_function_end): Likewise. * function.h (sturct function): Remove obstack-related variables. (save_tree_status): Don't declare. (restore_tree_status): Likewise. * gcse.c (compute_can_copy): Don't call oballoc/obfree. * genattrtab.c (operate_exp): Remove ggc_p conditionals. (simplify_cond): Likewise. (simplify_test_exp): Don't mess with obstacks. (optimize_attrs): Likewise. * gengenrtl.c (gendef): Don't include ggc_p conditionals. * ggc-callbacks.c (ggc_p): Remove. * ggc-none.c (ggc_p): Remove. * ggc.h (ggc_p): Don't declare. * integrate.c (save_for_inline): Don't mess with obstacks. (integrate_decl_tree): Likewise. (output_inline_function): Likewise. * lists.c (init_EXPR_INSN_LIST_cache): Likewise. * loop.c (temp_obstack): Remove. (rtl_obstack): Likewise. (init_loop): Don't mess with obstacks. (reg_address_cost): Free BIVs and GIVs. (check_insns_for_bivs): Use xmalloc, not oballoc. (find_mem_givs): Likewise. (record_biv): Likewise. (general_induction_var): Likewise. (product_cheap_p): Likewse. * optabs.c (init_one_libfunc): Remove ggc_p conditional. * print-tree.c (debug_tree): Don't use oballoc/obfree. (print_node): Likewise. * profile.c (output_func_start_profiler): Remove call to temporary_allocation. * reload1.c (eliminate_regs_in_insn): Don't mess with obstacks. * resource.c (mark_target_live_regs): Use xmalloc. (free_resource_info): Free the memory. * rtl.c (rtl_obstack): Remove. (rtvec_alloc): Don't mess with obstacks. (rtx_alloc): Likewise. (rtx_free): Remove. (copy_rtx): Don't handle `b' cases. (read_rtx): Use a local rtl_obstack. * rtl.h (oballoc): Remove. (obfree): Likewise. (pop_obstacks): Likewise. (push_obstacks): Likewise. (allocate_bb_life_data): Likewise. (allocate_reg_life_data): Likewise. (rtx_free): Likewise. * sdbout.c (sdbout_queue_anonymous_type): Use tree_cons, not saveable_tree_cons. * simplify-rtx.c (cselib_init): Don't mess with obstacks. * stmt.c (mark_block_nesting): Mark the label_chain. (epxand_label): Use ggc_alloc, not oballoc. (clear_last_expr): Don't mess with obstacks. (expand_decl_cleanup): Likewise. (expand_dcc_cleanup): Likewise. (expand_dhc_cleanup): Likewise. (expand_anon_union_decl): Likewise. (add_case_node): Use xmalloc, not oballoc. (free_case_nodes): New function. (expand_end_case): Call it. * stor-layout.c (layout_type): Don't mess with obstacks. (layout_type): Likewise. * toplev.c (wrapup_global_declarations): Likewise. (compile_file): Remove ggc_p conditionals. (rest_of_compilation): Call init_flow. Remove ggc_p conditionals. (decode_f_option): Remove ggc_p conditionals. * tree.c (function_maybepermanent_obstack): Remove. (maybepermanent_obstack): Likewise. (function_obstack): Likewise. (tmeporary_obstack): Likewise. (momentary_obstack): Likewise. (temp_decl_obstack): Likewise. (saveable_obstack): Likewise. (rtl_obstack): Likewise. (current_obstack): Likewise. (expression_obstack): Likewise. (struct obstack_stack): Likewise. (obstack_stack): Likewise. (obstack_stack_obstack): Likewise. (maybepermanent_firstobj): Likewise. (temporary_firstobj): Likewise. (momentary_firstobj): Likewise. (temp_decl_firstobj): Likewise. (momentary_function_firstobj): Likewise. (all_types_permanent): Likewise. (struct momentary_level): Likewise. (momentary_stack): Likewise. (init_obstacks): Remove initialization of removed obstacks. (save_tree_status): Remove. (restore_tree_status): Likewise. (temporary_allocation): Liekwise. (end_temporary_allocation): Liekwise. (resume_temporary_allocation): Likewise. (saveable_allocation): Likewise. (push_obstacks): Likewise. (push_obstacks_nochange): Likewise. (pop_obstacks): Likewise. (allocation_temporary_p): Likewise. (permanent_allocation): Likewise. (preserve_data): Likewise. (preserve_initializer): Likewise. (rtl_in_current_obstack): Likewise. (rtl_in_saveable_obstack): Likewise. (oballoc): Likewise. (obfree): Likewise. (savealloc): Likewise. (expralloc): Likewise. (print_obstack_name): Likewise. (debug_obstack): Likewise. (object_permanent_p): Likewise. (push_momentary): Likewise. (perserve_momentary): Likewise. (clear_momentary): Likewise. (pop_momentary): Likewise. (pop_momentary_nofree): Likewise. (suspend_momentary): Likewise. (resume_momentary): Likewise. (make_node): Don't set TREE_PERMANENT. (copy_node): Remove ggc_p conditionals. Don't set TYPE_OBSTACK. Don't set TREE_PERMANENT. (get_identifier): Remove ggc_p conditionals. (build_string): Likewise. (make_tree_vec): Likewise. (build_decl_list): Remove. (build_expr_list): Likewise. (tree_cons): Remove ggc_p conditionals. (decl_tree_cons): Remove. (expr_tree_cons): Likewise. (perm_tree_cons): Likewise. (temp_tree_cons): Likewise. (saveable_tree_cons): Likewise. (build1): Remove ggc_p conditionals. (build_parse_node): Likewise. (build_type_attribute_variant): Don't mess with obstacks. (build_type_copy): Likewise. (type_hash_canon): Likewise. (build_pointer_type): Likewise. (build_reference_type): Likewise. (build_index_type): Likewise. (build_range_type): Likewise. (dump_tree_statistics): Don't print obstack information. * tree.h (struct tree_common): Remove permanent_flag. (TREE_PERMANENT): Remove. (TREE_SET_PERMANENT): Likewise. (TYPE_OBSTACK): Likewise. (struct tree_type): Remove obstack. (oballoc): Remove. (savealloc): Likewise. (build_decl_list): Likewise. (build_expr_list): Likewise. (perm_tree_cons): Likewise. (temp_tree_cons): Likewise. (saveable_tree_cons): Likewise. (decl_tree_cons): Likewise. (expr_tree_cons): Likewise. (suspend_momentary): Likewise. (allocation_temporary_p): Likewise. (resume_momentary): Likewise. (push_obstacks_nochange): Likewise. (permanent_allocation): Likewise. (push_momentary): Likewise. (clear_momentary): Likewise. (pop_momentary): Likewise. (end_temporary_allocation): Likewise. (pop_obstacks): Likewise. (push_obstacks): Likewise. (pop_momentary_nofree): LIkewise. (preserve_momentary): Likewise. (saveable_allocation): Likewise. (temporary_allocation): Likewise. (resume_temporary_allocation): Likewise. (perserve_initializer): Likewise. (debug_obstack): Likewise. (rtl_in_current_obstack): Likewise. (rtl_in_saveable_obstack): Likewise. (obfree): Likewise. * varasm.c (current_obstack): Remove. (saveable_obstack): Remove. (rtl_obstack): Remove. (immed_double_const): Don't mess with obstacks. (immed_real_cons): Likewise. (output_constant_def): Likewise. (init_varasm_status): Use xcalloc. (mark_pool_constant): Mark the pool constant itself. (free_varasm_status): Free memory. (decode_rtx_const): Call bzero directly, rather than expanding it inline. (record_rtx_const): Don't mess with obstacks. (force_const_mem): Likewise. * config/arm/arm.c (arm_encode_call_attribute): Remove ggc_p conditionals. (aof_pic_entry): Likewise. * config/ia64/ia64.c (ia64_encode_section_info): Likewise. * config/m32r/m32r.c (m32r_encode_section_info): Likewise. * config/pa/pa.c (saveable_obstack): Remove. (rtl_obstack): Likewise. (current_obstack): Likewise. (output_call): Don't mess with obstacks. (hppa_encode_label): Remove ggc_p conditionals. * config/romp/romp.c (get_symref): Don't mess with obstacks. * config/rs6000/rs6000.c (output_toc): Remove ggc_p conditional. (rs6000_encode_section_info): Likewise. * config/sh/sh.c (get_fpscr_rtx): Likewise. From-SVN: r36856
2000-10-10reload1.c (calculate_needs_all_insns): If deleting an instruction, remove ↵Jakub Jelinek1-2/+13
its insn_chain structure as well. * reload1.c (calculate_needs_all_insns): If deleting an instruction, remove its insn_chain structure as well. * gcc.dg/20001009-1.c: New test. From-SVN: r36824
2000-09-18Fix a reload inheritance problemBernd Schmidt1-1/+4
From-SVN: r36497
2000-09-14calls.c (precompute_register_parameters): Use COSTS_N_INSNS, not 2.Richard Henderson1-1/+1
* calls.c (precompute_register_parameters): Use COSTS_N_INSNS, not 2. * cse.c (rtx_cost): Likewise. * optabls.c (expand_binop): Likewise. (expand_twoval_binop, prepare_cmp_insn): Likewise. * regclass.c (copy_cost): Likewise. * reload1.c (reload_cse_move2add): Likewise. From-SVN: r36423
2000-09-08Fix computation of need_mode in choose_reload_regs.Bernd Schmidt1-2/+7
From-SVN: r36264
generated by cgit v1.1 at 2025-08-07 05:27:59 +0000