| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
locate_and_pad_parm is called when expanding function call from
initialize_argument_information and when generating function body
from assign_parm_find_entry_rtl:
/* Remember if the outgoing parameter requires extra alignment on the
calling function side. */
if (crtl->stack_alignment_needed < boundary)
crtl->stack_alignment_needed = boundary;
if (crtl->preferred_stack_boundary < boundary)
crtl->preferred_stack_boundary = boundary;
stack_alignment_needed and preferred_stack_boundary should be updated
only when expanding function call, not when generating function body.
Add update_stack_alignment_for_call to update stack alignment when
outgoing parameter is passed in the stack.
gcc/
PR rtl-optimization/90765
* calls.c (update_stack_alignment_for_call): New function.
(expand_call): Call update_stack_alignment_for_call when
outgoing parameter is passed in the stack.
(emit_library_call_value_1): Likewise.
* function.c (locate_and_pad_parm): Don't update
stack_alignment_needed and preferred_stack_boundary.
gcc/testsuite/
PR rtl-optimization/90765
* gcc.target/i386/pr90765-1.c: New test.
* gcc.target/i386/pr90765-2.c: Likewise.
From-SVN: r272296
|
|
In <https://gcc.gnu.org/ml/gcc-patches/2019-05/msg01417.html>:
...a change introduced in r94104 where BITS_PER_WORD was chosenperhaps because we expect register-sized writes into this area.
See <https://gcc.gnu.org/ml/gcc-patches/2005-01/msg01564.html>
for the r94104 change.
* function.c (assign_parm_setup_block): Raise alignment of
stacked parameter only for STRICT_ALIGNMENT targets.
From-SVN: r271497
|
|
-fno-guess-branch-probability -fno-isolate-erroneous-paths-dereference -fno-omit-frame-pointer -fno-split-wide-types -fno-tree-ccp -fno-tree-sra)
PR rtl-optimization/87485
* function.c (expand_function_end): Move stack_protect_epilogue
before loading of return value into hard register(s).
* gcc.dg/pr87485.c: New test.
From-SVN: r270013
|
|
lra-constraints.c:2962)
gcc/
PR rtl-optimization/89313
* function.c (matching_constraint_num): New static function.
(match_asm_constraints_1): Use it. Fixup white space and comment.
Don't replace inputs with non-matching constraints which conflict
with early clobber outputs.
gcc/testsuite/
PR rtl-optimization/89313
* gcc.dg/pr89313.c: New test.
From-SVN: r269969
|
|
* function.c (assign_parm_setup_block): Use the stored
size, not the passed size, when allocating stack-space,
also for a parameter with alignment larger than
MAX_SUPPORTED_STACK_ALIGNMENT.
From-SVN: r268763
|
|
PR rtl-optimization/88796
* emit-rtl.h (struct rtl_data): Add stack_protect_guard_decl field.
* cfgexpand.c (stack_protect_prologue): Initialize
crtl->stack_protect_guard_decl.
* function.c (stack_protect_epilogue): Use it instead of calling
targetm.stack_protect_guard again.
* dse.c (check_mem_read_rtx): Ignore MEM_VOLATILE_P reads from
MEMs with MEM_EXPR equal to crtl->stack_protect_guard or
crtl->stack_protect_guard_decl.
* config/i386/i386.c (ix86_stack_protect_guard): Set TREE_THIS_VOLATILE
on the returned MEM_EXPR.
* gcc.target/i386/pr88796.c: New test.
From-SVN: r267916
|
|
is not aligned when the requested alignment exceeds MAX_SUPPORTED_STACK_ALIGNMENT)
PR middle-end/84877
PR bootstrap/88450
* function.c (assign_stack_local_1): Revert the 2018-11-21 changes.
(assign_parm_setup_block): Do the argument slot realignment here
instead.
From-SVN: r267812
|
|
PR rtl-optimization/88331
* function.c (assign_stack_local_1): Don't set dynamic_align_addr if
not currently_expanding_to_rtl.
* gcc.target/i386/pr88331.c: New test.
From-SVN: r267758
|
|
From-SVN: r267494
|
|
The new insn here (temporarily) illegally shares RTL. This fixes it.
PR rtl-optimization/88001
* function.c (match_asm_constraints_1): Don't invalidly share RTL.
From-SVN: r267122
|
|
In case of high register pressure in PIC mode, address of the stack
protector's guard can be spilled on ARM targets as shown in PR85434,
thus allowing an attacker to control what the canary would be compared
against. ARM does lack stack_protect_set and stack_protect_test insn
patterns, defining them does not help as the address is expanded
regularly and the patterns only deal with the copy and test of the
guard with the canary.
This problem does not occur for x86 targets because the PIC access and
the test can be done in the same instruction. Aarch64 is exempt too
because PIC access insn pattern are mov of UNSPEC which prevents it from
the second access in the epilogue being CSEd in cse_local pass with the
first access in the prologue.
The approach followed here is to create new "combined" set and test
standard pattern names that take the unexpanded guard and do the set or
test. This allows the target to use an opaque pattern (eg. using UNSPEC)
to hide the individual instructions being generated to the compiler and
split the pattern into generic load, compare and branch instruction
after register allocator, therefore avoiding any spilling. This is here
implemented for the ARM targets. For targets not implementing these new
standard pattern names, the existing stack_protect_set and
stack_protect_test pattern names are used.
To be able to split PIC access after register allocation, the functions
had to be augmented to force a new PIC register load and to control
which register it loads into. This is because sharing the PIC register
between prologue and epilogue could lead to spilling due to CSE again
which an attacker could use to control what the canary gets compared
against.
2018-11-22 Thomas Preud'homme <thomas.preudhomme@linaro.org>
gcc/
PR target/85434
* target-insns.def (stack_protect_combined_set): Define new standard
pattern name.
(stack_protect_combined_test): Likewise.
* cfgexpand.c (stack_protect_prologue): Try new
stack_protect_combined_set pattern first.
* function.c (stack_protect_epilogue): Try new
stack_protect_combined_test pattern first.
* config/arm/arm.c (require_pic_register): Add pic_reg and compute_now
parameters to control which register to use as PIC register and force
reloading PIC register respectively. Insert in the stream of insns if
possible.
(legitimize_pic_address): Expose above new parameters in prototype and
adapt recursive calls accordingly. Use pic_reg if non null instead of
cached one.
(arm_load_pic_register): Add pic_reg parameter and use it if non null.
(arm_legitimize_address): Adapt to new legitimize_pic_address
prototype.
(thumb_legitimize_address): Likewise.
(arm_emit_call_insn): Adapt to require_pic_register prototype change.
(arm_expand_prologue): Adapt to arm_load_pic_register prototype change.
(thumb1_expand_prologue): Likewise.
* config/arm/arm-protos.h (legitimize_pic_address): Adapt to prototype
change.
(arm_load_pic_register): Likewise.
* config/arm/predicated.md (guard_addr_operand): New predicate.
(guard_operand): New predicate.
* config/arm/arm.md (movsi expander): Adapt to legitimize_pic_address
prototype change.
(builtin_setjmp_receiver expander): Adapt to thumb1_expand_prologue
prototype change.
(stack_protect_combined_set): New expander..
(stack_protect_combined_set_insn): New insn_and_split pattern.
(stack_protect_set_insn): New insn pattern.
(stack_protect_combined_test): New expander.
(stack_protect_combined_test_insn): New insn_and_split pattern.
(arm_stack_protect_test_insn): New insn pattern.
* config/arm/thumb1.md (thumb1_stack_protect_test_insn): New insn pattern.
* config/arm/unspecs.md (UNSPEC_SP_SET): New unspec.
(UNSPEC_SP_TEST): Likewise.
* doc/md.texi (stack_protect_combined_set): Document new standard
pattern name.
(stack_protect_set): Clarify that the operand for guard's address is
legal.
(stack_protect_combined_test): Document new standard pattern name.
(stack_protect_test): Clarify that the operand for guard's address is
legal.
gcc/testsuite/
PR target/85434
* gcc.target/arm/pr85434.c: New test.
From-SVN: r266379
|
|
PR middle-end/88129
* function.c (expand_function_end): Do not emit extra blockage insn.
From-SVN: r266356
|
|
the stack when required alignment is larger than MAX_SUPPORTED_STACK_ALIGNMENT
As described in PR84877. https://gcc.gnu.org/bugzilla/show_bug.cgi?id=84877
The local copy of parameter on stack is not aligned.
For BLKmode paramters, a local copy on the stack will be saved.
There are three cases:
1) arguments passed partially on the stack, partially via registers.
2) arguments passed fully on the stack.
3) arguments passed via registers.
After the change here, in all three cases, the stack slot for the local
parameter copy is aligned by the data type.
The stack slot is the DECL_RTL of the parameter. All the references thereafter
in the function will refer to this RTL.
To populate the local copy on the stack,
For case 1) and 2), there are operations to move data from the caller's stack
(from incoming rtl) into callee's stack.
For case 3), the registers are directly saved into the stack slot.
In all cases, the destination address is properly aligned.
But for case 1) and case 2), the source address is not aligned by the type.
It is defined by the PCS how the arguments are prepared.
The block move operation is fulfilled by emit_block_move (). As far as I can see,
it will use the smaller alignment of source and destination.
This looks fine as long as we don't use instructions which requires a strict
larger alignment than the address actually has.
Here, it only changes receiving parameters.
The function assign_stack_local_1 will be called in various places.
Usually, the caller will constraint the ALIGN parameter.
For example via STACK_SLOT_ALIGNMENT macro.
assign_parm_setup_block will call assign_stack_local () with alignment from the
parameter type which in this case could be
larger than MAX_SUPPORTED_STACK_ALIGNMENT.
The alignment operation for parameter copy on the stack is similar to stack vars.
First, enough space is reserved on the stack. The size is fixed at compile time.
Instructions are emitted to dynamically get an aligned address at runtime
within this piece of memory.
This will unavoidably increase the usage of stack. However, it really depends on
how many over-aligned parameters are passed by value.
gcc/
2018-11-21 Renlin Li <renlin.li@arm.com>
PR middle-end/84877
* explow.h (get_dynamic_stack_size): Declare it as external.
* explow.c (record_new_stack_level): Remove function static attribute.
* function.c (assign_stack_local_1): Dynamically align the stack slot
addr for parameter copy on the stack.
gcc/testsuite/
2018-11-21 Renlin Li <renlin.li@arm.com>
PR middle-end/84877
* gcc.dg/pr84877.c: New.
From-SVN: r266345
|
|
* emit-rtl.c (init_emit_once): Do not emit MODE_POINTER_BOUNDS RTXes.
* emit-rtl.h (rtl_data): Remove return_bnd.
* explow.c (trunc_int_for_mode): Do not handle POINTER_BOUNDS_MODE_P.
* function.c (diddle_return_value): Do not handle crtl->return_bnd.
* genmodes.c (complete_mode): Do not handle MODE_POINTER_BOUNDS.
(POINTER_BOUNDS_MODE): Remove definition.
(make_pointer_bounds_mode): Remove.
(get_mode_class): Do not handle MODE_POINTER_BOUNDS.
* machmode.h (POINTER_BOUNDS_MODE_P): Remove definition.
(scalare_mode::includes_p): Do not handle MODE_POINTER_BOUNDS.
* mode-classes.def: Do not define MODE_POINTER_BOUNDS.
* stor-layout.c (int_mode_for_mode): Do not handle MODE_POINTER_BOUNDS.
* tree-core.h (enum tree_index): Remove TI_POINTER_BOUNDS_TYPE.
* varasm.c (output_constant_pool_2): Do not handle MODE_POINTER_BOUNDS.
* config/i386/i386-modes.def (BND32, BND64): Remove.
* config/i386/i386.c (dbx_register_map): Remove bound registers.
(dbx64_register_map): Ditto.
(svr4_dbx_register_map): Ditto.
(indirect_thunk_bnd_needed): Remove.
(indirect_thunks_bnd_used): Ditto.
(indirect_return_bnd_needed): Ditto.
(indirect_return_via_cx_bnd): Ditto.
(enum indirect_thunk_prefix): Remove indirect_thunk_prefix_bnd.
(indirect_thunk_name): Remove handling of indirect_thunk_prefix_bnd.
(output_indirect_thunk): Ditto. Remove need_prefix argument.
(output_indirect_thunk_function): Remove handling of
indirect_return_bnd_needed, indirect_return_via_cx_bnd,
indirect_thunk_bnd_needed and indirect_thunks_bnd_used variables.
(ix86_save_reg): Remove handling of crtl->return_bnd.
(ix86_legitimate_constant_p): Remove handling of POINTER_BOUNDS_MODE_P.
(ix86_print_operand_address_as): Remove handling of UNSPEC_BNDMK_ADDR
and UNSPEC_BNDLX_ADDR.
(ix86_output_indirect_branch_via_reg): Remove handling of
indirect_thunk_prefix_bnd.
(ix86_output_indirect_branch_via_push): Ditto.
(ix86_output_function_return): Ditto.
(ix86_output_indirect_function_return): Ditto.
(avoid_func_arg_motion): Do not handle UNSPEC_BNDSTX.
* config/i386/i386.h (FIXED_REGISTERS): Remove bound registers.
(CALL_USED_REGISTERS): Ditto.
(REG_ALLOC_ORDER): Update for removal of bound registers.
(HI_REGISTER_NAMES): Ditto.
* config/i386/i386.md (UNSPEC_BNDMK, UNSPEC_BNDMK_ADDR, UNSPEC_BNDSTX)
(UNSPEC_BNDLDX, UNSPEC_BNDLDX_ADDR, UNSPEC_BNDCL, UNSPEC_BNDCU)
(UNSPEC_BNDCN, UNSPEC_MPX_FENCE): Remove.
(BND0_REG, BND1_REG, BND2_REG, BND3_REG): Remove
(FIRST_PSEUDO_REG): Update.
(BND): Remove mode iterator.
* config/i386/predicates.md (bnd_mem_operator): Remove.
From-SVN: r263835
|
|
This reverts commit r263245.
From-SVN: r263252
|
|
In case of high register pressure in PIC mode, address of the stack
protector's guard can be spilled on ARM targets as shown in PR85434,
thus allowing an attacker to control what the canary would be compared
against. This is also known as CVE-2018-12886. ARM does lack
stack_protect_set and stack_protect_test insn patterns, defining them
does not help as the address is expanded regularly and the patterns
only deal with the copy and test of the guard with the canary.
This problem does not occur for x86 targets because the PIC access and
the test can be done in the same instruction. Aarch64 is exempt too
because PIC access insn pattern are mov of UNSPEC which prevents it from
the second access in the epilogue being CSEd in cse_local pass with the
first access in the prologue.
The approach followed here is to create new "combined" set and test
standard pattern names that take the unexpanded guard and do the set or
test. This allows the target to use an opaque pattern (eg. using UNSPEC)
to hide the individual instructions being generated to the compiler and
split the pattern into generic load, compare and branch instruction
after register allocator, therefore avoiding any spilling. This is here
implemented for the ARM targets. For targets not implementing these new
standard pattern names, the existing stack_protect_set and
stack_protect_test pattern names are used.
To be able to split PIC access after register allocation, the functions
had to be augmented to force a new PIC register load and to control
which register it loads into. This is because sharing the PIC register
between prologue and epilogue could lead to spilling due to CSE again
which an attacker could use to control what the canary gets compared
against.
2018-08-02 Thomas Preud'homme <thomas.preudhomme@linaro.org>
gcc/
PR target/85434
* target-insns.def (stack_protect_combined_set): Define new standard
pattern name.
(stack_protect_combined_test): Likewise.
* cfgexpand.c (stack_protect_prologue): Try new
stack_protect_combined_set pattern first.
* function.c (stack_protect_epilogue): Try new
stack_protect_combined_test pattern first.
* config/arm/arm.c (require_pic_register): Add pic_reg and compute_now
parameters to control which register to use as PIC register and force
reloading PIC register respectively. Insert in the stream of insns if
possible.
(legitimize_pic_address): Expose above new parameters in prototype and
adapt recursive calls accordingly.
(arm_legitimize_address): Adapt to new legitimize_pic_address
prototype.
(thumb_legitimize_address): Likewise.
(arm_emit_call_insn): Adapt to new require_pic_register prototype.
* config/arm/arm-protos.h (legitimize_pic_address): Adapt to prototype
change.
* config/arm/arm.md (movsi expander): Adapt to legitimize_pic_address
prototype change.
(stack_protect_combined_set): New insn_and_split pattern.
(stack_protect_set): New insn pattern.
(stack_protect_combined_test): New insn_and_split pattern.
(stack_protect_test): New insn pattern.
* config/arm/unspecs.md (UNSPEC_SP_SET): New unspec.
(UNSPEC_SP_TEST): Likewise.
* doc/md.texi (stack_protect_combined_set): Document new standard
pattern name.
(stack_protect_set): Clarify that the operand for guard's address is
legal.
(stack_protect_combined_test): Document new standard pattern name.
(stack_protect_test): Clarify that the operand for guard's address is
legal.
gcc/testsuite/
PR target/85434
* gcc.target/arm/pr85434.c: New test.
From-SVN: r263245
|
|
gcc/ada/ChangeLog:
PR middle-end/82063
* gcc-interface/misc.c (gnat_handle_option): Change function argument
to HOST_WIDE_INT.
gcc/brig/ChangeLog:
PR middle-end/82063
* brig/brig-lang.c (brig_langhook_handle_option): Change function
argument to HOST_WIDE_INT.
gcc/c-family/ChangeLog:
PR middle-end/82063
* c-common.h (c_common_handle_option): Change function argument
to HOST_WIDE_INT.
* c-opts.c (c_common_init_options): Same.
(c_common_handle_option): Same. Remove special handling of
OPT_Walloca_larger_than_ and OPT_Wvla_larger_than_.
* c.opt (-Walloc-size-larger-than, -Walloca-larger-than): Change
options to take a HOST_WIDE_INT argument and accept a byte-size
suffix. Initialize.
(-Wvla-larger-than): Same.
(-Wno-alloc-size-larger-than, -Wno-alloca-larger-than): New.
(-Wno-vla-larger-than): Same.
gcc/fortran/ChangeLog:
PR middle-end/82063
* gfortran.h (gfc_handle_option): Change function argument
to HOST_WIDE_INT.
* options.c (gfc_handle_option): Same.
gcc/go/ChangeLog:
PR middle-end/82063
* go-lang.c (go_langhook_handle_option): Change function argument
to HOST_WIDE_INT.
gcc/lto/ChangeLog:
PR middle-end/82063
* lto-lang.c (lto_handle_option): Change function argument
to HOST_WIDE_INT.
gcc/testsuite/ChangeLog:
PR middle-end/82063
* gcc/testsuite/c-c++-common/pr68657-1.c: Adjust.
* gcc/testsuite/c-c++-common/pr68657-2.c: Same.
* gcc/testsuite/c-c++-common/pr68657-3.c: Same.
* gcc.dg/Walloc-size-larger-than-16.c: Same.
* gcc.dg/Walloca-larger-than.c: New test.
* gcc.dg/Walloca-larger-than-2.c: New test.
* gcc.dg/Wframe-larger-than-2.c: New test.
* gcc.dg/Wlarger-than3.c: New test.
* gcc.dg/Wvla-larger-than-3.c: New test.
* gcc.dg/pr42611.c: Adjust.
* gnat.dg/frame_overflow.adb: Same.
gcc/ChangeLog:
PR middle-end/82063
* builtins.c (expand_builtin_alloca): Adjust.
* calls.c (alloc_max_size): Simplify.
* cgraphunit.c (cgraph_node::expand): Adjust.
* common.opt (larger_than_size, warn_frame_larger_than): Remove
variables.
(frame_larger_than_size): Same.
(-Wframe-larger-than, -Wlarger-than, -Wstack-usage): Change options
to take a HOST_WIDE_INT argument and accept a byte-size suffix.
Initialize.
* doc/invoke.texi (GCC Command Options): Document option arguments.
Explain byte-size arguments and suffixes.
(-Wvla-larger-than, -Wno-alloc-size-larger-than): Update.
(-Wno-alloca-larger-than, -Wno-vla-larger-than): Same.
(-Wframe-larger-than, -Wlarger-than, -Wstack-usage): Same.
* doc/options.texi (UInteger): Expand.
(Host_Wide_Int, ByteSize): Document new properties.
* final.c (final_start_function_1): Include sizes in an error message.
* function.c (frame_offset_overflow): Same.
* gimple-ssa-warn-alloca.c (pass_walloca::gate): Adjust.
(alloca_call_type_by_arg): Change function argument to HOST_WIDE_INT.
Diagnose unbounded alloca calls only for limits of less than
PTRDIFF_MAX.
(alloca_call_type): Adjust. Diagnose possibly out-of-bounds alloca
calls and VLA size only for limits of less than PTRDIFF_MAX. Same
for alloca(0).
(pass_walloca::execute): Adjust. Diagnose alloca calls in loops
only for limits of less than PTRDIFF_MAX.
* langhooks-def.h (lhd_handle_option): Change function argument
to HOST_WIDE_INT.
* langhooks.c (lhd_handle_option): Same.
* langhooks.h (handle_option): Same.
* opt-functions.awk (switch_bit_fields): Handle Host_Wide_Int and
ByteSize flags.
(var_type, var_type_struct): Same.
(var_set): Handle ByteSize flag.
* optc-gen.awk: Add comments to output to ease debugging. Make
use of HOST_WIDE_INT where appropriate.
* opts-gen-save.awk: Use %lx to format unsigned long.
* opth-gen.awk: Change function argument to HOST_WIDE_INT.
* opts-common.c (integral_argument): Return HOST_WIDE_INT and add
arguments. Parse bytes-size suffixes.
(enum_arg_to_value): Change function argument to HOST_WIDE_INT.
(enum_value_to_arg): Same.
(decode_cmdline_option): Handle cl_host_wide_int. Adjust.
(handle_option): Adjust.
(generate_option): Change function argument to HOST_WIDE_INT.
(cmdline_handle_error): Adjust.
(read_cmdline_option): Change function argument to HOST_WIDE_INT.
(set_option): Change function argument to HOST_WIDE_INT.
(option_enabled): Handle cl_host_wide_int.
(get_option_state): Handle CLVC_SIZE.
(control_warning_option): Same.
* opts.c (common_handle_option): Change function argument to
HOST_WIDE_INT. Remove handling of OPT_Walloca_larger_than_ and
OPT_Wvla_larger_than_.
* opts.h (enum cl_var_type): Add an enumerator.
* stor-layout.c (layout_decl): Print a more meaningful warning.
* toplev.c (output_stack_usage): Adjust.
From-SVN: r262910
|
|
2018-07-04 Denys Vlasenko <dvlasenk@redhat.com>
Martin Liska <mliska@suse.cz>
PR middle-end/66240
PR target/45996
PR c/84100
* common.opt: Rename align options with 'str_' prefix.
* common/config/i386/i386-common.c (set_malign_value): New
function.
(ix86_handle_option): Use it to set -falign-* options/
* config/aarch64/aarch64-protos.h (struct tune_params): Change
type from int to string.
* config/aarch64/aarch64.c: Update default values from int
to string.
* config/alpha/alpha.c (alpha_override_options_after_change):
Likewise.
* config/arm/arm.c (arm_override_options_after_change_1): Likewise.
* config/i386/dragonfly.h (ASM_OUTPUT_MAX_SKIP_ALIGN): Print
max skip conditionally.
* config/i386/freebsd.h (SUBALIGN_LOG): New.
(ASM_OUTPUT_MAX_SKIP_ALIGN): Print
max skip conditionally.
* config/i386/gas.h (ASM_OUTPUT_MAX_SKIP_ALIGN): Print
max skip conditionally.
* config/i386/gnu-user.h (SUBALIGN_LOG): New.
(ASM_OUTPUT_MAX_SKIP_ALIGN): Print
max skip conditionally.
* config/i386/i386.c (struct ptt): Change type from int to
string.
(ix86_default_align): Set default values.
* config/i386/i386.h (ASM_OUTPUT_MAX_SKIP_PAD): Print
max skip conditionally.
* config/i386/iamcu.h (SUBALIGN_LOG): New.
(ASM_OUTPUT_MAX_SKIP_ALIGN):
* config/i386/lynx.h (ASM_OUTPUT_MAX_SKIP_ALIGN):
* config/i386/netbsd-elf.h (ASM_OUTPUT_MAX_SKIP_ALIGN): Print
max skip conditionally.
* config/i386/openbsdelf.h (SUBALIGN_LOG): New.
(ASM_OUTPUT_MAX_SKIP_ALIGN) Print max skip conditionally.:
* config/i386/x86-64.h (SUBALIGN_LOG): New.
(ASM_OUTPUT_MAX_SKIP_ALIGN): Print
max skip conditionally.
(ASM_OUTPUT_MAX_SKIP_PAD): Likewise.
* config/ia64/ia64.c (ia64_option_override): Set default values
for alignment options.
* config/m68k/m68k.c: Handle new str_align_* options.
* config/mips/mips.c (mips_set_compression_mode): Change
type of constants.
(mips_option_override): Set default values for options.
* config/powerpcspe/powerpcspe.c (rs6000_option_override_internal):
Likewise.
* config/rs6000/rs6000.c (rs6000_option_override_internal):
Likewise.
* config/rx/rx.c (rx_option_override): Likewise.
* config/rx/rx.h (JUMP_ALIGN): Use align_jumps_log.
(LABEL_ALIGN): Use align_labels_log.
(LOOP_ALIGN): Use align_loops_align.
* config/s390/s390.c (s390_asm_output_function_label): Use new
macros.
* config/sh/sh.c (sh_override_options_after_change):
Change type of constants.
* config/spu/spu.c (spu_sched_init): Likewise.
* config/sparc/sparc.c (sparc_option_override): Set default
values for options.
* config/visium/visium.c (visium_option_override): Likewise.
* config/visium/visium.h (ASM_OUTPUT_MAX_SKIP_ALIGN): Do not
emit p2align format with last argument if it's not needed.
* doc/invoke.texi: Document extended format of -falign-*.
* final.c: Use align_labels alignment.
* flags.h (struct target_flag_state): Change type to use
align_flags.
(struct align_flags_tuple): New.
(struct align_flags): Likewise.
(align_loops_log): Redefine macro to use new types.
(align_loops_max_skip): Redefine macro to use new types.
(align_jumps_log): Redefine macro to use new types.
(align_jumps_max_skip): Redefine macro to use new types.
(align_labels_log): Redefine macro to use new types.
(align_labels_max_skip): Redefine macro to use new types.
(align_functions_log): Redefine macro to use new types.
(align_loops): Redefine macro to use new types.
(align_jumps): Redefine macro to use new types.
(align_labels): Redefine macro to use new types.
(align_functions): Redefine macro to use new types.
(align_functions_max_skip): Redefine macro to use new types.
(align_loops_value): New macro.
(align_jumps_value): New macro.
(align_labels_value): New macro.
(align_functions_value): New macro.
* function.c (invoke_set_current_function_hook): Propagate
alignment values from flags to global variables default in
topleev.h.
* ipa-icf.c (sem_function::equals_wpa): Use
cl_optimization_option_eq instead of memcmp.
* lto-streamer.h (cl_optimization_stream_out): Support streaming
of string types.
(cl_optimization_stream_in): Likewise.
* optc-save-gen.awk: Support strings in cl_optimization.
* opth-gen.awk: Likewise.
* opts.c (finish_options): Remove error checking of invalid
value ranges.
(MAX_CODE_ALIGN): Remove.
(MAX_CODE_ALIGN_VALUE): Likewise.
(parse_and_check_align_values): New function.
(check_alignment_argument): Likewise.
(common_handle_option): Use check_alignment_argument.
* opts.h (parse_and_check_align_values): Declare.
* toplev.c (init_alignments): Remove.
(read_log_maxskip): New.
(parse_N_M): Likewise.
(parse_alignment_opts): Likewise.
(backend_init_target): Remove usage of init_alignments.
* toplev.h (parse_alignment_opts): Declare.
* tree-streamer-in.c (streamer_read_tree_bitfields): Add new
argument.
* tree-streamer-out.c (streamer_write_tree_bitfields): Likewise.
* tree.c (cl_option_hasher::equal): New.
* varasm.c: Use new global macros.
2018-07-04 Martin Liska <mliska@suse.cz>
PR middle-end/66240
PR target/45996
PR c/84100
* lto.c (compare_tree_sccs_1): Use cl_optimization_option_eq
instead of memcmp.
2018-07-04 Martin Liska <mliska@suse.cz>
PR middle-end/66240
PR target/45996
PR c/84100
* gcc.dg/pr84100.c (foo):
* gcc.target/i386/falign-functions-2.c: New test.
* gcc.target/i386/falign-functions.c: New test.
From-SVN: r262375
|
|
2018-06-08 Martin Liska <mliska@suse.cz>
* MAINTAINERS: Remove MPX-related entries.
* Makefile.def: Remove libmpx support.
* Makefile.in: Likewise.
* configure: Remove removed files.
* configure.ac: Likewise.
* libmpx/ChangeLog: Remove.
* libmpx/Makefile.am: Remove.
* libmpx/Makefile.in: Remove.
* libmpx/acinclude.m4: Remove.
* libmpx/aclocal.m4: Remove.
* libmpx/config.h.in: Remove.
* libmpx/configure: Remove.
* libmpx/configure.ac: Remove.
* libmpx/configure.tgt: Remove.
* libmpx/libmpx.spec.in: Remove.
* libmpx/mpxrt/Makefile.am: Remove.
* libmpx/mpxrt/Makefile.in: Remove.
* libmpx/mpxrt/libmpx.map: Remove.
* libmpx/mpxrt/libtool-version: Remove.
* libmpx/mpxrt/mpxrt-utils.c: Remove.
* libmpx/mpxrt/mpxrt-utils.h: Remove.
* libmpx/mpxrt/mpxrt.c: Remove.
* libmpx/mpxrt/mpxrt.h: Remove.
* libmpx/mpxwrap/Makefile.am: Remove.
* libmpx/mpxwrap/Makefile.in: Remove.
* libmpx/mpxwrap/libmpxwrappers.map: Remove.
* libmpx/mpxwrap/libtool-version: Remove.
* libmpx/mpxwrap/mpx_wrappers.c: Remove.
2018-06-08 Martin Liska <mliska@suse.cz>
* bootstrap-mpx.mk: Remove.
2018-06-08 Martin Liska <mliska@suse.cz>
* Makefile.in: Remove support for MPX (macros, related functions,
fields in cgraph_node, ...).
* builtin-types.def (BT_BND): Likewise.
(BT_FN_BND_CONST_PTR): Likewise.
(BT_FN_CONST_PTR_BND): Likewise.
(BT_FN_VOID_PTR_BND): Likewise.
(BT_FN_BND_CONST_PTR_SIZE): Likewise.
(BT_FN_VOID_CONST_PTR_BND_CONST_PTR): Likewise.
* builtins.c (expand_builtin_memcpy_with_bounds): Likewise.
(expand_builtin_mempcpy_with_bounds): Likewise.
(expand_builtin_memset_with_bounds): Likewise.
(expand_builtin_memset_args): Likewise.
(std_expand_builtin_va_start): Likewise.
(expand_builtin): Likewise.
(expand_builtin_with_bounds): Likewise.
* builtins.def (DEF_BUILTIN_CHKP): Likewise.
(DEF_LIB_BUILTIN_CHKP): Likewise.
(DEF_EXT_LIB_BUILTIN_CHKP): Likewise.
(DEF_CHKP_BUILTIN): Likewise.
(BUILT_IN_MEMCPY): Likewise.
(BUILT_IN_MEMMOVE): Likewise.
(BUILT_IN_MEMPCPY): Likewise.
(BUILT_IN_MEMSET): Likewise.
(BUILT_IN_STPCPY): Likewise.
(BUILT_IN_STRCAT): Likewise.
(BUILT_IN_STRCHR): Likewise.
(BUILT_IN_STRCPY): Likewise.
(BUILT_IN_STRLEN): Likewise.
(BUILT_IN_MEMCPY_CHK): Likewise.
(BUILT_IN_MEMMOVE_CHK): Likewise.
(BUILT_IN_MEMPCPY_CHK): Likewise.
(BUILT_IN_MEMSET_CHK): Likewise.
(BUILT_IN_STPCPY_CHK): Likewise.
(BUILT_IN_STRCAT_CHK): Likewise.
(BUILT_IN_STRCPY_CHK): Likewise.
* calls.c (store_bounds): Likewise.
(emit_call_1): Likewise.
(special_function_p): Likewise.
(maybe_warn_nonstring_arg): Likewise.
(initialize_argument_information): Likewise.
(finalize_must_preallocate): Likewise.
(compute_argument_addresses): Likewise.
(expand_call): Likewise.
* cfgexpand.c (expand_call_stmt): Likewise.
(expand_return): Likewise.
(expand_gimple_stmt_1): Likewise.
(pass_expand::execute): Likewise.
* cgraph.c (cgraph_edge::redirect_call_stmt_to_callee): Likewise.
(cgraph_node::remove): Likewise.
(cgraph_node::dump): Likewise.
(cgraph_node::verify_node): Likewise.
* cgraph.h (chkp_function_instrumented_p): Likewise.
(symtab_node::get_alias_target): Likewise.
(cgraph_node::can_remove_if_no_direct_calls_and_refs_p): Likewise.
(cgraph_local_p): Likewise.
* cgraphbuild.c (cgraph_edge::rebuild_edges): Likewise.
(cgraph_edge::rebuild_references): Likewise.
* cgraphunit.c (varpool_node::finalize_decl): Likewise.
(walk_polymorphic_call_targets): Likewise.
(cgraph_node::expand_thunk): Likewise.
(symbol_table::output_weakrefs): Likewise.
* common/config/i386/i386-common.c (OPTION_MASK_ISA2_GENERAL_REGS_ONLY_UNSET): Likewise.
(ix86_handle_option): Likewise.
* config/i386/constraints.md: Likewise.
* config/i386/i386-builtin-types.def (BND): Likewise.
(VOID): Likewise.
(PVOID): Likewise.
(ULONG): Likewise.
* config/i386/i386-builtin.def (BDESC_END): Likewise.
(BDESC_FIRST): Likewise.
(BDESC): Likewise.
* config/i386/i386-c.c (ix86_target_macros_internal): Likewise.
* config/i386/i386-protos.h (ix86_bnd_prefixed_insn_p): Likewise.
* config/i386/i386.c (enum reg_class): Likewise.
(ix86_target_string): Likewise.
(ix86_option_override_internal): Likewise.
(ix86_conditional_register_usage): Likewise.
(ix86_valid_target_attribute_inner_p): Likewise.
(ix86_set_indirect_branch_type): Likewise.
(ix86_set_current_function): Likewise.
(ix86_function_arg_regno_p): Likewise.
(init_cumulative_args): Likewise.
(ix86_function_arg_advance): Likewise.
(ix86_function_arg): Likewise.
(ix86_pass_by_reference): Likewise.
(ix86_function_value_regno_p): Likewise.
(ix86_function_value_1): Likewise.
(ix86_function_value_bounds): Likewise.
(ix86_return_in_memory): Likewise.
(ix86_setup_incoming_vararg_bounds): Likewise.
(ix86_va_start): Likewise.
(indirect_thunk_need_prefix): Likewise.
(print_reg): Likewise.
(ix86_print_operand): Likewise.
(ix86_expand_call): Likewise.
(ix86_output_function_return): Likewise.
(reg_encoded_number): Likewise.
(BDESC_VERIFYS): Likewise.
(ix86_init_mpx_builtins): Likewise.
(ix86_init_builtins): Likewise.
(ix86_emit_cmove): Likewise.
(ix86_emit_move_max): Likewise.
(ix86_expand_builtin): Likewise.
(ix86_builtin_mpx_function): Likewise.
(ix86_get_arg_address_for_bt): Likewise.
(ix86_load_bounds): Likewise.
(ix86_store_bounds): Likewise.
(ix86_load_returned_bounds): Likewise.
(ix86_store_returned_bounds): Likewise.
(ix86_class_likely_spilled_p): Likewise.
(ix86_hard_regno_mode_ok): Likewise.
(x86_order_regs_for_local_alloc): Likewise.
(ix86_mitigate_rop): Likewise.
(ix86_bnd_prefixed_insn_p): Likewise.
(ix86_mpx_bound_mode): Likewise.
(ix86_make_bounds_constant): Likewise.
(ix86_initialize_bounds): Likewise.
(TARGET_LOAD_BOUNDS_FOR_ARG): Likewise.
(TARGET_STORE_BOUNDS_FOR_ARG): Likewise.
(TARGET_LOAD_RETURNED_BOUNDS): Likewise.
(TARGET_STORE_RETURNED_BOUNDS): Likewise.
(TARGET_CHKP_BOUND_MODE): Likewise.
(TARGET_BUILTIN_CHKP_FUNCTION): Likewise.
(TARGET_CHKP_FUNCTION_VALUE_BOUNDS): Likewise.
(TARGET_CHKP_MAKE_BOUNDS_CONSTANT): Likewise.
(TARGET_CHKP_INITIALIZE_BOUNDS): Likewise.
* config/i386/i386.h (TARGET_MPX): Likewise.
(TARGET_MPX_P): Likewise.
(VALID_BND_REG_MODE): Likewise.
(FIRST_BND_REG): Likewise.
(LAST_BND_REG): Likewise.
(enum reg_class): Likewise.
(BND_REG_P): Likewise.
(BND_REGNO_P): Likewise.
(BNDmode): Likewise.
(ADJUST_INSN_LENGTH): Likewise.
* config/i386/i386.md: Likewise.
* config/i386/i386.opt: Likewise.
* config/i386/linux-common.h (LIBMPX_LIBS): Likewise.
(defined): Likewise.
(LINK_MPX): Likewise.
(MPX_SPEC): Likewise.
(LIBMPX_SPEC): Likewise.
(LIBMPXWRAPPERS_SPEC): Likewise.
(CHKP_SPEC): Likewise.
* config/i386/predicates.md: Likewise.
* dbxout.c (dbxout_type): Likewise.
* doc/extend.texi: Likewise.
* doc/invoke.texi: Likewise.
* doc/md.texi: Likewise.
* doc/tm.texi: Likewise.
* doc/tm.texi.in: Likewise.
* dwarf2out.c (is_base_type): Likewise.
(gen_formal_types_die): Likewise.
(gen_subprogram_die): Likewise.
(gen_type_die_with_usage): Likewise.
(gen_decl_die): Likewise.
(dwarf2out_late_global_decl): Likewise.
* expr.c (expand_assignment): Likewise.
(emit_storent_insn): Likewise.
(store_expr_with_bounds): Likewise.
(store_expr): Likewise.
(expand_expr_real_1): Likewise.
* expr.h (store_expr_with_bounds): Likewise.
* function.c (use_register_for_decl): Likewise.
(struct bounds_parm_data): Likewise.
(assign_parms_augmented_arg_list): Likewise.
(assign_parm_find_entry_rtl): Likewise.
(assign_parm_is_stack_parm): Likewise.
(assign_parm_load_bounds): Likewise.
(assign_bounds): Likewise.
(assign_parms): Likewise.
(expand_function_start): Likewise.
* gcc.c (CHKP_SPEC): Likewise.
* gimple-fold.c (gimple_fold_builtin_memory_op): Likewise.
* gimple-ssa-warn-restrict.c (builtin_access::builtin_access): Likewise.
(wrestrict_dom_walker::check_call): Likewise.
* gimple.c (gimple_build_call_from_tree): Likewise.
* gimple.h (enum gf_mask): Likewise.
(gimple_call_with_bounds_p): Likewise.
(gimple_call_set_with_bounds): Likewise.
* gimplify.c (gimplify_init_constructor): Likewise.
* ipa-cp.c (initialize_node_lattices): Likewise.
(propagate_constants_across_call): Likewise.
(find_more_scalar_values_for_callers_subset): Likewise.
* ipa-hsa.c (process_hsa_functions): Likewise.
* ipa-icf-gimple.c (func_checker::compare_gimple_call): Likewise.
* ipa-icf.c (sem_function::merge): Likewise.
* ipa-inline.c (early_inliner): Likewise.
* ipa-pure-const.c (warn_function_noreturn): Likewise.
(warn_function_cold): Likewise.
(propagate_pure_const): Likewise.
* ipa-ref.h (enum GTY): Likewise.
* ipa-split.c (find_retbnd): Likewise.
(consider_split): Likewise.
(split_function): Likewise.
* ipa-visibility.c (cgraph_externally_visible_p): Likewise.
* ipa.c (walk_polymorphic_call_targets): Likewise.
(symbol_table::remove_unreachable_nodes): Likewise.
(process_references): Likewise.
(cgraph_build_static_cdtor_1): Likewise.
* lto-cgraph.c (lto_output_node): Likewise.
(output_refs): Likewise.
(compute_ltrans_boundary): Likewise.
(input_overwrite_node): Likewise.
(input_node): Likewise.
(input_cgraph_1): Likewise.
* params.def (PARAM_CHKP_MAX_CTOR_SIZE): Likewise.
* passes.c (pass_manager::execute_early_local_passes): Likewise.
(class pass_chkp_instrumentation_passes): Likewise.
(make_pass_chkp_instrumentation_passes): Likewise.
* passes.def: Likewise.
* rtl.h (struct GTY): Likewise.
(CALL_EXPR_WITH_BOUNDS_P): Likewise.
* stor-layout.c (layout_type): Likewise.
* symtab.c: Likewise.
* target.def: Likewise.
* targhooks.c (default_chkp_bound_type): Likewise.
(default_chkp_bound_mode): Likewise.
(default_builtin_chkp_function): Likewise.
(default_chkp_function_value_bounds): Likewise.
(default_chkp_make_bounds_constant): Likewise.
(default_chkp_initialize_bounds): Likewise.
* targhooks.h (default_chkp_bound_type): Likewise.
(default_chkp_bound_mode): Likewise.
(default_builtin_chkp_function): Likewise.
(default_chkp_function_value_bounds): Likewise.
(default_chkp_make_bounds_constant): Likewise.
(default_chkp_initialize_bounds): Likewise.
* toplev.c (compile_file): Likewise.
(process_options): Likewise.
* tree-core.h (DEF_BUILTIN): Likewise.
(DEF_BUILTIN_CHKP): Likewise.
* tree-inline.c (declare_return_variable): Likewise.
(remap_gimple_stmt): Likewise.
(copy_bb): Likewise.
(initialize_inlined_parameters): Likewise.
(expand_call_inline): Likewise.
* tree-pass.h (make_pass_ipa_chkp_versioning): Likewise.
(make_pass_ipa_chkp_early_produce_thunks): Likewise.
(make_pass_ipa_chkp_produce_thunks): Likewise.
(make_pass_chkp): Likewise.
(make_pass_chkp_opt): Likewise.
(make_pass_chkp_instrumentation_passes): Likewise.
* tree-pretty-print.c (dump_generic_node): Likewise.
* tree-ssa-ccp.c (insert_clobber_before_stack_restore): Likewise.
* tree-ssa-dce.c (propagate_necessity): Likewise.
(eliminate_unnecessary_stmts): Likewise.
* tree-ssa-pre.c (create_expression_by_pieces): Likewise.
* tree-ssa-sccvn.c (copy_reference_ops_from_call): Likewise.
* tree-ssa-sccvn.h: Likewise.
* tree-ssa-strlen.c (get_string_length): Likewise.
(valid_builtin_call): Likewise.
(adjust_last_stmt): Likewise.
(handle_builtin_strchr): Likewise.
(handle_builtin_strcpy): Likewise.
(handle_builtin_stxncpy): Likewise.
(handle_builtin_memcpy): Likewise.
(handle_builtin_strcat): Likewise.
(strlen_check_and_optimize_stmt): Likewise.
* tree-stdarg.c (expand_ifn_va_arg_1): Likewise.
* tree-streamer-in.c: Likewise.
* tree-streamer.c (record_common_node): Likewise.
* tree.c (tree_code_size): Likewise.
(wide_int_to_tree_1): Likewise.
(type_contains_placeholder_1): Likewise.
(build_common_tree_nodes): Likewise.
* tree.def (POINTER_BOUNDS_TYPE): Likewise.
* tree.h (POINTER_BOUNDS_TYPE_P): Likewise.
(POINTER_BOUNDS_P): Likewise.
(BOUNDED_TYPE_P): Likewise.
(BOUNDED_P): Likewise.
(CALL_WITH_BOUNDS_P): Likewise.
(pointer_bounds_type_node): Likewise.
* value-prof.c (gimple_ic): Likewise.
* var-tracking.c (vt_add_function_parameters): Likewise.
* varasm.c (make_decl_rtl): Likewise.
(assemble_start_function): Likewise.
(output_constant): Likewise.
(maybe_assemble_visibility): Likewise.
* varpool.c (ctor_for_folding): Likewise.
* chkp-builtins.def: Remove.
* ipa-chkp.c: Remove.
* ipa-chkp.h: Remove.
* rtl-chkp.c: Remove.
* rtl-chkp.h: Remove.
* tree-chkp-opt.c: Remove.
* tree-chkp.c: Remove.
* tree-chkp.h: Remove.
2018-06-08 Martin Liska <mliska@suse.cz>
* c-attribs.c (handle_bnd_variable_size_attribute): Remove support
for MPX (macros, related functions, fields in cgraph_node, ...).
(handle_bnd_legacy): Likewise.
(handle_bnd_instrument): Likewise.
* c.opt: Likewise.
2018-06-08 Martin Liska <mliska@suse.cz>
* lto-partition.c (add_references_to_partition): Remove support
for MPX (macros, related functions, fields in cgraph_node, ...).
(add_symbol_to_partition_1): Likewise.
(privatize_symbol_name): Likewise.
* lto-symtab.c (lto_cgraph_replace_node): Likewise.
2018-06-08 Martin Liska <mliska@suse.cz>
* g++.dg/dg.exp: Do not use mpx.exp.
* g++.dg/lto/lto.exp: Likewise.
* g++.dg/lto/pr69729_0.C: Remove.
* g++.dg/opt/pr71529.C: Remove.
* g++.dg/pr63995-1.C: Remove.
* g++.dg/pr68270.C: Remove.
* g++.dg/pr71624.C: Remove.
* g++.dg/pr71633.C: Remove.
* g++.dg/pr79761.C: Remove.
* g++.dg/pr79764.C: Remove.
* g++.dg/pr79769.C: Remove.
* gcc.dg/lto/chkp-privatize-1_0.c: Remove.
* gcc.dg/lto/chkp-privatize-2_0.c: Remove.
* gcc.dg/lto/chkp-privatize_0.c: Remove.
* gcc.dg/lto/chkp-removed-alias_0.c: Remove.
* gcc.dg/lto/chkp-static-bounds_0.c: Remove.
* gcc.dg/lto/chkp-wrap-asm-name_0.c: Remove.
* gcc.dg/lto/lto.exp: Do not use mpx.exp.
* gcc.dg/lto/pr66221_0.c: Remove.
* gcc.target/i386/chkp-always_inline.c: Remove.
* gcc.target/i386/chkp-bndret.c: Remove.
* gcc.target/i386/chkp-builtins-1.c: Remove.
* gcc.target/i386/chkp-builtins-2.c: Remove.
* gcc.target/i386/chkp-builtins-3.c: Remove.
* gcc.target/i386/chkp-builtins-4.c: Remove.
* gcc.target/i386/chkp-const-check-1.c: Remove.
* gcc.target/i386/chkp-const-check-2.c: Remove.
* gcc.target/i386/chkp-hidden-def.c: Remove.
* gcc.target/i386/chkp-label-address.c: Remove.
* gcc.target/i386/chkp-lifetime-1.c: Remove.
* gcc.target/i386/chkp-narrow-bounds.c: Remove.
* gcc.target/i386/chkp-pr69044.c: Remove.
* gcc.target/i386/chkp-remove-bndint-1.c: Remove.
* gcc.target/i386/chkp-remove-bndint-2.c: Remove.
* gcc.target/i386/chkp-strchr.c: Remove.
* gcc.target/i386/chkp-strlen-1.c: Remove.
* gcc.target/i386/chkp-strlen-2.c: Remove.
* gcc.target/i386/chkp-strlen-3.c: Remove.
* gcc.target/i386/chkp-strlen-4.c: Remove.
* gcc.target/i386/chkp-strlen-5.c: Remove.
* gcc.target/i386/chkp-stropt-1.c: Remove.
* gcc.target/i386/chkp-stropt-10.c: Remove.
* gcc.target/i386/chkp-stropt-11.c: Remove.
* gcc.target/i386/chkp-stropt-12.c: Remove.
* gcc.target/i386/chkp-stropt-13.c: Remove.
* gcc.target/i386/chkp-stropt-14.c: Remove.
* gcc.target/i386/chkp-stropt-15.c: Remove.
* gcc.target/i386/chkp-stropt-16.c: Remove.
* gcc.target/i386/chkp-stropt-17.c: Remove.
* gcc.target/i386/chkp-stropt-2.c: Remove.
* gcc.target/i386/chkp-stropt-3.c: Remove.
* gcc.target/i386/chkp-stropt-4.c: Remove.
* gcc.target/i386/chkp-stropt-5.c: Remove.
* gcc.target/i386/chkp-stropt-6.c: Remove.
* gcc.target/i386/chkp-stropt-7.c: Remove.
* gcc.target/i386/chkp-stropt-8.c: Remove.
* gcc.target/i386/chkp-stropt-9.c: Remove.
* gcc.target/i386/i386.exp: Do not use mpx.exp.
* gcc.target/i386/indirect-thunk-11.c: Remove.
* gcc.target/i386/indirect-thunk-12.c: Remove.
* gcc.target/i386/indirect-thunk-attr-12.c: Remove.
* gcc.target/i386/indirect-thunk-attr-13.c: Remove.
* gcc.target/i386/indirect-thunk-bnd-1.c: Remove.
* gcc.target/i386/indirect-thunk-bnd-2.c: Remove.
* gcc.target/i386/indirect-thunk-bnd-3.c: Remove.
* gcc.target/i386/indirect-thunk-bnd-4.c: Remove.
* gcc.target/i386/interrupt-bnd-err-1.c: Remove.
* gcc.target/i386/interrupt-bnd-err-2.c: Remove.
* gcc.target/i386/mpx/alloca-1-lbv.c: Remove.
* gcc.target/i386/mpx/alloca-1-nov.c: Remove.
* gcc.target/i386/mpx/alloca-1-ubv.c: Remove.
* gcc.target/i386/mpx/arg-addr-1-lbv.c: Remove.
* gcc.target/i386/mpx/arg-addr-1-nov.c: Remove.
* gcc.target/i386/mpx/arg-addr-1-ubv.c: Remove.
* gcc.target/i386/mpx/bitfields-1-lbv.c: Remove.
* gcc.target/i386/mpx/bitfields-1-nov.c: Remove.
* gcc.target/i386/mpx/bitfields-1-ubv.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-chk-ptr-bounds-1-lbv.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-chk-ptr-bounds-1-nov.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-chk-ptr-bounds-1-ubv.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-chk-ptr-bounds-2.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-chk-ptr-lbounds-1-lbv.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-chk-ptr-lbounds-1-nov.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-chk-ptr-lbounds-2.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-chk-ptr-ubounds-1-nov.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-chk-ptr-ubounds-1-ubv.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-chk-ptr-ubounds-2.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-copy-ptr-bounds-1.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-copy-ptr-bounds-2-lbv.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-copy-ptr-bounds-2-nov.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-copy-ptr-bounds-2-ubv.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-copy-ptr-bounds-3.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-get-ptr-lbound-1.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-get-ptr-lbound-2.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-get-ptr-ubound-1.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-get-ptr-ubound-2.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-init-ptr-bounds-1.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-init-ptr-bounds-2-nov.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-init-ptr-bounds-3.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-narrow-ptr-bounds-1.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-narrow-ptr-bounds-2-lbv.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-narrow-ptr-bounds-2-nov.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-narrow-ptr-bounds-2-ubv.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-narrow-ptr-bounds-3-lbv.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-narrow-ptr-bounds-3-nov.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-narrow-ptr-bounds-3-ubv.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-narrow-ptr-bounds-4.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-null-ptr-bounds-1-bbv.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-set-ptr-bounds-1.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-set-ptr-bounds-2-lbv.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-set-ptr-bounds-2-nov.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-set-ptr-bounds-2-ubv.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-set-ptr-bounds-3.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-store-ptr-bounds-1-lbv.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-store-ptr-bounds-1-nov.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-store-ptr-bounds-1-ubv.c: Remove.
* gcc.target/i386/mpx/builtin-bnd-store-ptr-bounds-2.c: Remove.
* gcc.target/i386/mpx/calloc-1-lbv.c: Remove.
* gcc.target/i386/mpx/calloc-1-nov.c: Remove.
* gcc.target/i386/mpx/calloc-1-ubv.c: Remove.
* gcc.target/i386/mpx/chkp-fix-calls-1.c: Remove.
* gcc.target/i386/mpx/chkp-fix-calls-2.c: Remove.
* gcc.target/i386/mpx/chkp-fix-calls-3.c: Remove.
* gcc.target/i386/mpx/chkp-fix-calls-4.c: Remove.
* gcc.target/i386/mpx/chkp-thunk-comdat-1.cc: Remove.
* gcc.target/i386/mpx/chkp-thunk-comdat-2.cc: Remove.
* gcc.target/i386/mpx/chkp-thunk-comdat-3.c: Remove.
* gcc.target/i386/mpx/fastcall-1-lbv.c: Remove.
* gcc.target/i386/mpx/fastcall-1-nov.c: Remove.
* gcc.target/i386/mpx/fastcall-1-ubv.c: Remove.
* gcc.target/i386/mpx/fastcall-2-lbv.c: Remove.
* gcc.target/i386/mpx/fastcall-2-nov.c: Remove.
* gcc.target/i386/mpx/fastcall-2-ubv.c: Remove.
* gcc.target/i386/mpx/field-addr-1-lbv.c: Remove.
* gcc.target/i386/mpx/field-addr-1-nov.c: Remove.
* gcc.target/i386/mpx/field-addr-1-ubv.c: Remove.
* gcc.target/i386/mpx/field-addr-10-lbv.c: Remove.
* gcc.target/i386/mpx/field-addr-10-nov.c: Remove.
* gcc.target/i386/mpx/field-addr-10-ubv.c: Remove.
* gcc.target/i386/mpx/field-addr-2-lbv.c: Remove.
* gcc.target/i386/mpx/field-addr-2-nov.c: Remove.
* gcc.target/i386/mpx/field-addr-2-ubv.c: Remove.
* gcc.target/i386/mpx/field-addr-3-lbv.c: Remove.
* gcc.target/i386/mpx/field-addr-3-nov.c: Remove.
* gcc.target/i386/mpx/field-addr-3-ubv.c: Remove.
* gcc.target/i386/mpx/field-addr-4-lbv.c: Remove.
* gcc.target/i386/mpx/field-addr-4-nov.c: Remove.
* gcc.target/i386/mpx/field-addr-4-ubv.c: Remove.
* gcc.target/i386/mpx/field-addr-5-lbv.c: Remove.
* gcc.target/i386/mpx/field-addr-5-nov.c: Remove.
* gcc.target/i386/mpx/field-addr-5-ubv.c: Remove.
* gcc.target/i386/mpx/field-addr-6-lbv.c: Remove.
* gcc.target/i386/mpx/field-addr-6-nov.c: Remove.
* gcc.target/i386/mpx/field-addr-6-ubv.c: Remove.
* gcc.target/i386/mpx/field-addr-7-lbv.c: Remove.
* gcc.target/i386/mpx/field-addr-7-nov.c: Remove.
* gcc.target/i386/mpx/field-addr-7-ubv.c: Remove.
* gcc.target/i386/mpx/field-addr-8-lbv.c: Remove.
* gcc.target/i386/mpx/field-addr-8-nov.c: Remove.
* gcc.target/i386/mpx/field-addr-8-ubv.c: Remove.
* gcc.target/i386/mpx/field-addr-9-lbv.c: Remove.
* gcc.target/i386/mpx/field-addr-9-nov.c: Remove.
* gcc.target/i386/mpx/field-addr-9-ubv.c: Remove.
* gcc.target/i386/mpx/frame-address-1-nov.c: Remove.
* gcc.target/i386/mpx/hard-reg-1-nov.c: Remove.
* gcc.target/i386/mpx/hard-reg-2-lbv.c: Remove.
* gcc.target/i386/mpx/hard-reg-2-nov.c: Remove.
* gcc.target/i386/mpx/hard-reg-2-ubv.c: Remove.
* gcc.target/i386/mpx/if-stmt-1-lbv.c: Remove.
* gcc.target/i386/mpx/if-stmt-1-nov.c: Remove.
* gcc.target/i386/mpx/if-stmt-1-ubv.c: Remove.
* gcc.target/i386/mpx/if-stmt-2-lbv.c: Remove.
* gcc.target/i386/mpx/if-stmt-2-nov.c: Remove.
* gcc.target/i386/mpx/if-stmt-2-ubv.c: Remove.
* gcc.target/i386/mpx/label-address-1.c: Remove.
* gcc.target/i386/mpx/legacy-1-nov.c: Remove.
* gcc.target/i386/mpx/macro.c: Remove.
* gcc.target/i386/mpx/malloc-1-lbv.c: Remove.
* gcc.target/i386/mpx/malloc-1-nov.c: Remove.
* gcc.target/i386/mpx/malloc-1-ubv.c: Remove.
* gcc.target/i386/mpx/memcpy-1.c: Remove.
* gcc.target/i386/mpx/memmove-1.c: Remove.
* gcc.target/i386/mpx/memmove-2.c: Remove.
* gcc.target/i386/mpx/memmove-zero-length.c: Remove.
* gcc.target/i386/mpx/mpx-check.h: Remove.
* gcc.target/i386/mpx/mpx-os-support.h: Remove.
* gcc.target/i386/mpx/mpx.exp: Remove.
* gcc.target/i386/mpx/nested-function-1-lbv.c: Remove.
* gcc.target/i386/mpx/nested-function-1-nov.c: Remove.
* gcc.target/i386/mpx/nested-function-1-ubv.c: Remove.
* gcc.target/i386/mpx/pointer-arg-1-lbv.c: Remove.
* gcc.target/i386/mpx/pointer-arg-1-nov.c: Remove.
* gcc.target/i386/mpx/pointer-arg-1-ubv.c: Remove.
* gcc.target/i386/mpx/pointer-arg-2-lbv.c: Remove.
* gcc.target/i386/mpx/pointer-arg-2-nov.c: Remove.
* gcc.target/i386/mpx/pointer-arg-2-ubv.c: Remove.
* gcc.target/i386/mpx/pointer-arg-3-lbv.c: Remove.
* gcc.target/i386/mpx/pointer-arg-3-nov.c: Remove.
* gcc.target/i386/mpx/pointer-arg-3-ubv.c: Remove.
* gcc.target/i386/mpx/pointer-arg-4-lbv.c: Remove.
* gcc.target/i386/mpx/pointer-arg-4-nov.c: Remove.
* gcc.target/i386/mpx/pointer-arg-4-ubv.c: Remove.
* gcc.target/i386/mpx/pointer-arg-5-lbv.c: Remove.
* gcc.target/i386/mpx/pointer-arg-5-nov.c: Remove.
* gcc.target/i386/mpx/pointer-arg-5-ubv.c: Remove.
* gcc.target/i386/mpx/pointer-diff-1.c: Remove.
* gcc.target/i386/mpx/pointer-store-1-lbv.c: Remove.
* gcc.target/i386/mpx/pointer-store-1-nov.c: Remove.
* gcc.target/i386/mpx/pointer-store-1-ubv.c: Remove.
* gcc.target/i386/mpx/pr65508.c: Remove.
* gcc.target/i386/mpx/pr65531.cc: Remove.
* gcc.target/i386/mpx/pr66048.cc: Remove.
* gcc.target/i386/mpx/pr66134.c: Remove.
* gcc.target/i386/mpx/pr66566.c: Remove.
* gcc.target/i386/mpx/pr66567.c: Remove.
* gcc.target/i386/mpx/pr66568.c: Remove.
* gcc.target/i386/mpx/pr66569.c: Remove.
* gcc.target/i386/mpx/pr66581.c: Remove.
* gcc.target/i386/mpx/pr68337-1.c: Remove.
* gcc.target/i386/mpx/pr68337-2.c: Remove.
* gcc.target/i386/mpx/pr68416.c: Remove.
* gcc.target/i386/mpx/pr78339.c: Remove.
* gcc.target/i386/mpx/pr79631.c: Remove.
* gcc.target/i386/mpx/pr79633.c: Remove.
* gcc.target/i386/mpx/pr79753.c: Remove.
* gcc.target/i386/mpx/pr79770.c: Remove.
* gcc.target/i386/mpx/pr79987.c: Remove.
* gcc.target/i386/mpx/pr79988.c: Remove.
* gcc.target/i386/mpx/realloc-1-lbv.c: Remove.
* gcc.target/i386/mpx/realloc-1-nov.c: Remove.
* gcc.target/i386/mpx/realloc-1-ubv.c: Remove.
* gcc.target/i386/mpx/realloc-2-lbv.c: Remove.
* gcc.target/i386/mpx/realloc-2-nov.c: Remove.
* gcc.target/i386/mpx/realloc-2-ubv.c: Remove.
* gcc.target/i386/mpx/reference-1-lbv.cpp: Remove.
* gcc.target/i386/mpx/reference-1-nov.cpp: Remove.
* gcc.target/i386/mpx/reference-1-ubv.cpp: Remove.
* gcc.target/i386/mpx/reference-2-lbv.cpp: Remove.
* gcc.target/i386/mpx/reference-2-nov.cpp: Remove.
* gcc.target/i386/mpx/reference-2-ubv.cpp: Remove.
* gcc.target/i386/mpx/reference-3-lbv.cpp: Remove.
* gcc.target/i386/mpx/reference-3-nov.cpp: Remove.
* gcc.target/i386/mpx/reference-3-ubv.cpp: Remove.
* gcc.target/i386/mpx/reference-4-lbv.cpp: Remove.
* gcc.target/i386/mpx/reference-4-nov.cpp: Remove.
* gcc.target/i386/mpx/reference-4-ubv.cpp: Remove.
* gcc.target/i386/mpx/return-pointer-1-lbv.c: Remove.
* gcc.target/i386/mpx/return-pointer-1-nov.c: Remove.
* gcc.target/i386/mpx/return-pointer-1-ubv.c: Remove.
* gcc.target/i386/mpx/return-struct-1-lbv.c: Remove.
* gcc.target/i386/mpx/return-struct-1-nov.c: Remove.
* gcc.target/i386/mpx/return-struct-1-ubv.c: Remove.
* gcc.target/i386/mpx/return-struct-2-lbv.c: Remove.
* gcc.target/i386/mpx/return-struct-2-nov.c: Remove.
* gcc.target/i386/mpx/return-struct-2-ubv.c: Remove.
* gcc.target/i386/mpx/return-struct-3-lbv.c: Remove.
* gcc.target/i386/mpx/return-struct-3-nov.c: Remove.
* gcc.target/i386/mpx/return-struct-3-ubv.c: Remove.
* gcc.target/i386/mpx/return-struct-4-lbv.c: Remove.
* gcc.target/i386/mpx/return-struct-4-nov.c: Remove.
* gcc.target/i386/mpx/return-struct-4-ubv.c: Remove.
* gcc.target/i386/mpx/return-struct-5-lbv.c: Remove.
* gcc.target/i386/mpx/return-struct-5-nov.c: Remove.
* gcc.target/i386/mpx/return-struct-5-ubv.c: Remove.
* gcc.target/i386/mpx/return-struct-6-lbv.c: Remove.
* gcc.target/i386/mpx/return-struct-6-nov.c: Remove.
* gcc.target/i386/mpx/return-struct-6-ubv.c: Remove.
* gcc.target/i386/mpx/sincos-1-nov.c: Remove.
* gcc.target/i386/mpx/static-array-1-lbv.c: Remove.
* gcc.target/i386/mpx/static-array-1-nov.c: Remove.
* gcc.target/i386/mpx/static-array-1-ubv.c: Remove.
* gcc.target/i386/mpx/static-init-1-lbv.c: Remove.
* gcc.target/i386/mpx/static-init-1-nov.c: Remove.
* gcc.target/i386/mpx/static-init-1-ubv.c: Remove.
* gcc.target/i386/mpx/static-init-2-lbv.c: Remove.
* gcc.target/i386/mpx/static-init-2-nov.c: Remove.
* gcc.target/i386/mpx/static-init-2-ubv.c: Remove.
* gcc.target/i386/mpx/static-init-3-lbv.c: Remove.
* gcc.target/i386/mpx/static-init-3-nov.c: Remove.
* gcc.target/i386/mpx/static-init-3-ubv.c: Remove.
* gcc.target/i386/mpx/static-init-4-lbv.c: Remove.
* gcc.target/i386/mpx/static-init-4-nov.c: Remove.
* gcc.target/i386/mpx/static-init-4-ubv.c: Remove.
* gcc.target/i386/mpx/static-init-5-lbv.c: Remove.
* gcc.target/i386/mpx/static-init-5-nov.c: Remove.
* gcc.target/i386/mpx/static-init-5-ubv.c: Remove.
* gcc.target/i386/mpx/static-init-6-lbv.c: Remove.
* gcc.target/i386/mpx/static-init-6-nov.c: Remove.
* gcc.target/i386/mpx/static-init-6-ubv.c: Remove.
* gcc.target/i386/mpx/static-string-1-lbv.c: Remove.
* gcc.target/i386/mpx/static-string-1-nov.c: Remove.
* gcc.target/i386/mpx/static-string-1-ubv.c: Remove.
* gcc.target/i386/mpx/struct-arg-1-lbv.c: Remove.
* gcc.target/i386/mpx/struct-arg-1-nov.c: Remove.
* gcc.target/i386/mpx/struct-arg-1-ubv.c: Remove.
* gcc.target/i386/mpx/struct-arg-10-lbv.c: Remove.
* gcc.target/i386/mpx/struct-arg-10-nov.c: Remove.
* gcc.target/i386/mpx/struct-arg-10-ubv.c: Remove.
* gcc.target/i386/mpx/struct-arg-2-lbv.c: Remove.
* gcc.target/i386/mpx/struct-arg-2-nov.c: Remove.
* gcc.target/i386/mpx/struct-arg-2-ubv.c: Remove.
* gcc.target/i386/mpx/struct-arg-3-lbv.c: Remove.
* gcc.target/i386/mpx/struct-arg-3-nov.c: Remove.
* gcc.target/i386/mpx/struct-arg-3-ubv.c: Remove.
* gcc.target/i386/mpx/struct-arg-4-lbv.c: Remove.
* gcc.target/i386/mpx/struct-arg-4-nov.c: Remove.
* gcc.target/i386/mpx/struct-arg-4-ubv.c: Remove.
* gcc.target/i386/mpx/struct-arg-5-lbv.c: Remove.
* gcc.target/i386/mpx/struct-arg-5-nov.c: Remove.
* gcc.target/i386/mpx/struct-arg-5-ubv.c: Remove.
* gcc.target/i386/mpx/struct-arg-6-lbv.c: Remove.
* gcc.target/i386/mpx/struct-arg-6-nov.c: Remove.
* gcc.target/i386/mpx/struct-arg-6-ubv.c: Remove.
* gcc.target/i386/mpx/struct-arg-7-lbv.c: Remove.
* gcc.target/i386/mpx/struct-arg-7-nov.c: Remove.
* gcc.target/i386/mpx/struct-arg-7-ubv.c: Remove.
* gcc.target/i386/mpx/struct-arg-8-lbv.c: Remove.
* gcc.target/i386/mpx/struct-arg-8-nov.c: Remove.
* gcc.target/i386/mpx/struct-arg-8-ubv.c: Remove.
* gcc.target/i386/mpx/struct-arg-9-lbv.c: Remove.
* gcc.target/i386/mpx/struct-arg-9-nov.c: Remove.
* gcc.target/i386/mpx/struct-arg-9-ubv.c: Remove.
* gcc.target/i386/mpx/struct-copy-1-lbv.c: Remove.
* gcc.target/i386/mpx/struct-copy-1-nov.c: Remove.
* gcc.target/i386/mpx/struct-copy-1-ubv.c: Remove.
* gcc.target/i386/mpx/struct-copy-2-lbv.c: Remove.
* gcc.target/i386/mpx/struct-copy-2-nov.c: Remove.
* gcc.target/i386/mpx/struct-copy-2-ubv.c: Remove.
* gcc.target/i386/mpx/thread-local-var-1-lbv.c: Remove.
* gcc.target/i386/mpx/thread-local-var-1-nov.c: Remove.
* gcc.target/i386/mpx/thread-local-var-1-ubv.c: Remove.
* gcc.target/i386/mpx/union-arg-1-lbv.c: Remove.
* gcc.target/i386/mpx/union-arg-1-nov.c: Remove.
* gcc.target/i386/mpx/union-arg-1-ubv.c: Remove.
* gcc.target/i386/mpx/va-arg-pack-1-lbv.c: Remove.
* gcc.target/i386/mpx/va-arg-pack-1-nov.c: Remove.
* gcc.target/i386/mpx/va-arg-pack-1-ubv.c: Remove.
* gcc.target/i386/mpx/va-arg-pack-2-lbv.c: Remove.
* gcc.target/i386/mpx/va-arg-pack-2-nov.c: Remove.
* gcc.target/i386/mpx/va-arg-pack-2-ubv.c: Remove.
* gcc.target/i386/mpx/vararg-1-lbv.c: Remove.
* gcc.target/i386/mpx/vararg-1-nov.c: Remove.
* gcc.target/i386/mpx/vararg-1-ubv.c: Remove.
* gcc.target/i386/mpx/vararg-2-lbv.c: Remove.
* gcc.target/i386/mpx/vararg-2-nov.c: Remove.
* gcc.target/i386/mpx/vararg-2-ubv.c: Remove.
* gcc.target/i386/mpx/vararg-3-lbv.c: Remove.
* gcc.target/i386/mpx/vararg-3-nov.c: Remove.
* gcc.target/i386/mpx/vararg-3-ubv.c: Remove.
* gcc.target/i386/mpx/vararg-4-lbv.c: Remove.
* gcc.target/i386/mpx/vararg-4-nov.c: Remove.
* gcc.target/i386/mpx/vararg-4-ubv.c: Remove.
* gcc.target/i386/mpx/vararg-5-lbv.c: Remove.
* gcc.target/i386/mpx/vararg-5-nov.c: Remove.
* gcc.target/i386/mpx/vararg-5-ubv.c: Remove.
* gcc.target/i386/mpx/vararg-6-lbv.c: Remove.
* gcc.target/i386/mpx/vararg-6-nov.c: Remove.
* gcc.target/i386/mpx/vararg-6-ubv.c: Remove.
* gcc.target/i386/mpx/vararg-7-lbv.c: Remove.
* gcc.target/i386/mpx/vararg-7-nov.c: Remove.
* gcc.target/i386/mpx/vararg-7-ubv.c: Remove.
* gcc.target/i386/mpx/vararg-8-lbv.c: Remove.
* gcc.target/i386/mpx/vararg-8-nov.c: Remove.
* gcc.target/i386/mpx/vararg-8-ubv.c: Remove.
* gcc.target/i386/mpx/vla-1-lbv.c: Remove.
* gcc.target/i386/mpx/vla-1-nov.c: Remove.
* gcc.target/i386/mpx/vla-1-ubv.c: Remove.
* gcc.target/i386/mpx/vla-2-lbv.c: Remove.
* gcc.target/i386/mpx/vla-2-nov.c: Remove.
* gcc.target/i386/mpx/vla-2-ubv.c: Remove.
* gcc.target/i386/mpx/vla-trailing-1-lbv.c: Remove.
* gcc.target/i386/mpx/vla-trailing-1-nov.c: Remove.
* gcc.target/i386/mpx/vla-trailing-1-ubv.c: Remove.
* gcc.target/i386/pr63995-2.c: Remove.
* gcc.target/i386/pr64805.c: Remove.
* gcc.target/i386/pr65044.c: Remove.
* gcc.target/i386/pr65167.c: Remove.
* gcc.target/i386/pr65183.c: Remove.
* gcc.target/i386/pr65184.c: Remove.
* gcc.target/i386/pr65523.c: Remove.
* gcc.target/i386/pr70876.c: Remove.
* gcc.target/i386/pr70877.c: Remove.
* gcc.target/i386/pr71458.c: Remove.
* gcc.target/i386/pr80880.c: Remove.
* gcc.target/i386/ret-thunk-25.c: Remove.
* gcc.target/i386/thunk-retbnd.c: Remove.
* lib/mpx-dg.exp: Remove.
* gcc.target/i386/funcspec-56.inc: Adjust test case.
From-SVN: r261304
|
|
This patch generalises various places that used hwi tree accessors so
that they can handle poly_ints instead. In many cases these changes
are by inspection rather than because something had shown them to be
necessary.
I think the alias.c part is a minor bug fix: previously we used
fits_uhwi_p for a signed HOST_WIDE_INT (which the caller does
treat as signed rather than unsigned). We also checked whether
each individual offset overflowed but didn't check whether the
sum did.
2018-05-30 Richard Sandiford <richard.sandiford@linaro.org>
gcc/
* alias.c (adjust_offset_for_component_ref): Use poly_int_tree_p
and wi::to_poly_offset. Add the current offset and then check
whether the sum fits, rather than using an unchecked addition of
a checked term. Check for a shwi rather than a uhwi.
* expr.c (get_bit_range): Use tree_to_poly_uint64.
(store_constructor): Use poly_int_tree_p.
(expand_expr_real_1): Likewise.
* function.c (assign_temp): Likewise.
* fold-const.c (const_binop): Use poly_int_tree_p and
wi::to_poly_offset.
(fold_indirect_ref_1): Likewise. Use multiple_p to attempt an exact
division.
* ipa-icf-gimple.c (func_checker::compare_operand): Use
to_poly_offset for MEM offsets.
* ipa-icf.c (sem_variable::equals): Likewise.
* stor-layout.c (compute_record_mode): Use poly_int_tree_p.
* tree-ssa-sccvn.c (ao_ref_init_from_vn_reference): Use
wi::to_poly_offset for BIT_FIELD_REF offsets.
(vn_reference_maybe_forwprop_address): Use poly_int_tree_p and
wi::to_poly_offset.
* var-tracking.c (emit_note_insn_var_location): Use
tree_to_poly_uint64.
From-SVN: r260914
|
|
elimination_costs_in_insn, at reload1.c:3633)
PR inline-asm/85034
* function.c (match_asm_constraints_1): Don't optimize if input
doesn't satisfy general_operand predicate for output's mode.
* gcc.target/i386/pr85034.c: New test.
From-SVN: r258796
|
|
at rtlanal.c:1870 (reg_overlap_mentioned_p()/match_asm_constraints_1()))
PR inline-asm/84941
* function.c (match_asm_constraints_1): Don't do the optimization
if input isn't a REG, SUBREG, MEM or constant.
* gcc.dg/pr84941.c: New test.
From-SVN: r258764
|
|
PR sanitizer/81715
PR testsuite/83882
* function.h (gimplify_parameters): Add gimple_seq * argument.
* function.c: Include gimple.h and options.h.
(gimplify_parameters): Add cleanup argument, add CLOBBER stmts
for the added local temporaries if needed.
* gimplify.c (gimplify_body): Adjust gimplify_parameters caller,
if there are any parameter cleanups, wrap whole body into a
try/finally with the cleanups.
From-SVN: r256861
|
|
This patch changes GET_MODE_SIZE from unsigned short to poly_uint16.
The non-mechanical parts were handled by previous patches.
2018-01-03 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* machmode.h (mode_size): Change from unsigned short to
poly_uint16_pod.
(mode_to_bytes): Return a poly_uint16 rather than an unsigned short.
(GET_MODE_SIZE): Return a constant if ONLY_FIXED_SIZE_MODES,
or if measurement_type is not polynomial.
(fixed_size_mode::includes_p): Check for constant-sized modes.
* genmodes.c (emit_mode_size_inline): Make mode_size_inline
return a poly_uint16 rather than an unsigned short.
(emit_mode_size): Change the type of mode_size from unsigned short
to poly_uint16_pod. Use ZERO_COEFFS for the initializer.
(emit_mode_adjustments): Cope with polynomial vector sizes.
* lto-streamer-in.c (lto_input_mode_table): Use bp_unpack_poly_value
for GET_MODE_SIZE.
* lto-streamer-out.c (lto_write_mode_table): Use bp_pack_poly_value
for GET_MODE_SIZE.
* auto-inc-dec.c (try_merge): Treat GET_MODE_SIZE as polynomial.
* builtins.c (expand_ifn_atomic_compare_exchange_into_call): Likewise.
* caller-save.c (setup_save_areas): Likewise.
(replace_reg_with_saved_mem): Likewise.
* calls.c (emit_library_call_value_1): Likewise.
* combine-stack-adj.c (combine_stack_adjustments_for_block): Likewise.
* combine.c (simplify_set, make_extraction, simplify_shift_const_1)
(gen_lowpart_for_combine): Likewise.
* convert.c (convert_to_integer_1): Likewise.
* cse.c (equiv_constant, cse_insn): Likewise.
* cselib.c (autoinc_split, cselib_hash_rtx): Likewise.
(cselib_subst_to_values): Likewise.
* dce.c (word_dce_process_block): Likewise.
* df-problems.c (df_word_lr_mark_ref): Likewise.
* dwarf2cfi.c (init_one_dwarf_reg_size): Likewise.
* dwarf2out.c (multiple_reg_loc_descriptor, mem_loc_descriptor)
(concat_loc_descriptor, concatn_loc_descriptor, loc_descriptor)
(rtl_for_decl_location): Likewise.
* emit-rtl.c (gen_highpart, widen_memory_access): Likewise.
* expmed.c (extract_bit_field_1, extract_integral_bit_field): Likewise.
* expr.c (emit_group_load_1, clear_storage_hints): Likewise.
(emit_move_complex, emit_move_multi_word, emit_push_insn): Likewise.
(expand_expr_real_1): Likewise.
* function.c (assign_parm_setup_block_p, assign_parm_setup_block)
(pad_below): Likewise.
* gimple-fold.c (optimize_atomic_compare_exchange_p): Likewise.
* gimple-ssa-store-merging.c (rhs_valid_for_store_merging_p): Likewise.
* ira.c (get_subreg_tracking_sizes): Likewise.
* ira-build.c (ira_create_allocno_objects): Likewise.
* ira-color.c (coalesced_pseudo_reg_slot_compare): Likewise.
(ira_sort_regnos_for_alter_reg): Likewise.
* ira-costs.c (record_operand_costs): Likewise.
* lower-subreg.c (interesting_mode_p, simplify_gen_subreg_concatn)
(resolve_simple_move): Likewise.
* lra-constraints.c (get_reload_reg, operands_match_p): Likewise.
(process_addr_reg, simplify_operand_subreg, curr_insn_transform)
(lra_constraints): Likewise.
(CONST_POOL_OK_P): Reject variable-sized modes.
* lra-spills.c (slot, assign_mem_slot, pseudo_reg_slot_compare)
(add_pseudo_to_slot, lra_spill): Likewise.
* omp-low.c (omp_clause_aligned_alignment): Likewise.
* optabs-query.c (get_best_extraction_insn): Likewise.
* optabs-tree.c (expand_vec_cond_expr_p): Likewise.
* optabs.c (expand_vec_perm_var, expand_vec_cond_expr): Likewise.
(expand_mult_highpart, valid_multiword_target_p): Likewise.
* recog.c (offsettable_address_addr_space_p): Likewise.
* regcprop.c (maybe_mode_change): Likewise.
* reginfo.c (choose_hard_reg_mode, record_subregs_of_mode): Likewise.
* regrename.c (build_def_use): Likewise.
* regstat.c (dump_reg_info): Likewise.
* reload.c (complex_word_subreg_p, push_reload, find_dummy_reload)
(find_reloads, find_reloads_subreg_address): Likewise.
* reload1.c (eliminate_regs_1): Likewise.
* rtlanal.c (for_each_inc_dec_find_inc_dec, rtx_cost): Likewise.
* simplify-rtx.c (avoid_constant_pool_reference): Likewise.
(simplify_binary_operation_1, simplify_subreg): Likewise.
* targhooks.c (default_function_arg_padding): Likewise.
(default_hard_regno_nregs, default_class_max_nregs): Likewise.
* tree-cfg.c (verify_gimple_assign_binary): Likewise.
(verify_gimple_assign_ternary): Likewise.
* tree-inline.c (estimate_move_cost): Likewise.
* tree-ssa-forwprop.c (simplify_vector_constructor): Likewise.
* tree-ssa-loop-ivopts.c (add_autoinc_candidates): Likewise.
(get_address_cost_ainc): Likewise.
* tree-vect-data-refs.c (vect_enhance_data_refs_alignment): Likewise.
(vect_supportable_dr_alignment): Likewise.
* tree-vect-loop.c (vect_determine_vectorization_factor): Likewise.
(vectorizable_reduction): Likewise.
* tree-vect-stmts.c (vectorizable_assignment, vectorizable_shift)
(vectorizable_operation, vectorizable_load): Likewise.
* tree.c (build_same_sized_truth_vector_type): Likewise.
* valtrack.c (cleanup_auto_inc_dec): Likewise.
* var-tracking.c (emit_note_insn_var_location): Likewise.
* config/arc/arc.h (ASM_OUTPUT_CASE_END): Use as_a <scalar_int_mode>.
(ADDR_VEC_ALIGN): Likewise.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r256201
|
|
From-SVN: r256169
|
|
This patch changes various bits of state related to argument sizes so
that they have type poly_int64 rather than HOST_WIDE_INT. This includes:
- incoming_args::pops_args and incoming_args::size
- rtl_data::outgoing_args_size
- pending_stack_adjust
- stack_pointer_delta
- stack_usage::pushed_stack_size
- args_size::constant
It also changes TARGET_RETURN_POPS_ARGS so that the size of the
arguments passed in and the size returned by the hook are both
poly_int64s.
2017-12-21 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* target.def (return_pops_args): Treat both the input and output
sizes as poly_int64s rather than HOST_WIDE_INTS.
* targhooks.h (default_return_pops_args): Update accordingly.
* targhooks.c (default_return_pops_args): Likewise.
* doc/tm.texi: Regenerate.
* emit-rtl.h (incoming_args): Change pops_args, size and
outgoing_args_size from int to poly_int64_pod.
* function.h (expr_status): Change x_pending_stack_adjust and
x_stack_pointer_delta from int to poly_int64.
(args_size::constant): Change from HOST_WIDE_INT to poly_int64.
(ARGS_SIZE_RTX): Update accordingly.
* calls.c (highest_outgoing_arg_in_use): Change from int to
unsigned int.
(stack_usage_watermark, stored_args_watermark): New variables.
(stack_region_maybe_used_p, mark_stack_region_used): New functions.
(emit_call_1): Change the stack_size and rounded_stack_size
parameters from HOST_WIDE_INT to poly_int64. Track n_popped
as a poly_int64.
(save_fixed_argument_area): Check stack_usage_watermark.
(initialize_argument_information): Change old_pending_adj from
a HOST_WIDE_INT * to a poly_int64_pod *.
(compute_argument_block_size): Return the size as a poly_int64
rather than an int.
(finalize_must_preallocate): Track polynomial argument sizes.
(compute_argument_addresses): Likewise.
(internal_arg_pointer_based_exp): Track polynomial offsets.
(mem_overlaps_already_clobbered_arg_p): Rename to...
(mem_might_overlap_already_clobbered_arg_p): ...this and take the
size as a poly_uint64 rather than an unsigned HOST_WIDE_INT.
Check stored_args_used_watermark.
(load_register_parameters): Update accordingly.
(check_sibcall_argument_overlap_1): Likewise.
(combine_pending_stack_adjustment_and_call): Take the unadjusted
args size as a poly_int64 rather than an int. Return a bool
indicating whether the optimization was possible and return
the new adjustment by reference.
(check_sibcall_argument_overlap): Track polynomail argument sizes.
Update stored_args_watermark.
(can_implement_as_sibling_call_p): Handle polynomial argument sizes.
(expand_call): Likewise. Maintain stack_usage_watermark and
stored_args_watermark. Update calls to
combine_pending_stack_adjustment_and_call.
(emit_library_call_value_1): Handle polynomial argument sizes.
Call stack_region_maybe_used_p and mark_stack_region_used.
Maintain stack_usage_watermark.
(store_one_arg): Likewise. Update call to
mem_overlaps_already_clobbered_arg_p.
* config/arm/arm.c (arm_output_function_prologue): Add a cast to
HOST_WIDE_INT.
* config/avr/avr.c (avr_outgoing_args_size): Likewise.
* config/microblaze/microblaze.c (microblaze_function_prologue):
Likewise.
* config/cr16/cr16.c (cr16_return_pops_args): Update for new
TARGET_RETURN_POPS_ARGS interface.
(cr16_compute_frame, cr16_initial_elimination_offset): Add casts
to HOST_WIDE_INT.
* config/ft32/ft32.c (ft32_compute_frame): Likewise.
* config/i386/i386.c (ix86_return_pops_args): Update for new
TARGET_RETURN_POPS_ARGS interface.
(ix86_expand_split_stack_prologue): Add a cast to HOST_WIDE_INT.
* config/moxie/moxie.c (moxie_compute_frame): Likewise.
* config/m68k/m68k.c (m68k_return_pops_args): Update for new
TARGET_RETURN_POPS_ARGS interface.
* config/vax/vax.c (vax_return_pops_args): Likewise.
* config/pa/pa.h (STACK_POINTER_OFFSET): Add a cast to poly_int64.
(EXIT_IGNORE_STACK): Update reference to crtl->outgoing_args_size.
* config/arm/arm.h (CALLER_INTERWORKING_SLOT_SIZE): Likewise.
* config/powerpcspe/aix.h (STACK_DYNAMIC_OFFSET): Likewise.
* config/powerpcspe/darwin.h (STACK_DYNAMIC_OFFSET): Likewise.
* config/powerpcspe/powerpcspe.h (STACK_DYNAMIC_OFFSET): Likewise.
* config/rs6000/aix.h (STACK_DYNAMIC_OFFSET): Likewise.
* config/rs6000/darwin.h (STACK_DYNAMIC_OFFSET): Likewise.
* config/rs6000/rs6000.h (STACK_DYNAMIC_OFFSET): Likewise.
* dojump.h (saved_pending_stack_adjust): Change x_pending_stack_adjust
and x_stack_pointer_delta from int to poly_int64.
* dojump.c (do_pending_stack_adjust): Update accordingly.
* explow.c (allocate_dynamic_stack_space): Handle polynomial
stack_pointer_deltas.
* function.c (STACK_DYNAMIC_OFFSET): Add a cast to poly_int64.
(pad_to_arg_alignment): Track polynomial offsets.
(assign_parm_find_stack_rtl): Likewise.
(assign_parms, locate_and_pad_parm): Handle polynomial argument sizes.
* toplev.c (output_stack_usage): Update reference to
current_function_pushed_stack_size.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r255921
|
|
This patch makes the instantiate virtual regs pass track offsets
as poly_ints.
2017-12-21 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* function.c (in_arg_offset, var_offset, dynamic_offset)
(out_arg_offset, cfa_offset): Change from int to poly_int64.
(instantiate_new_reg): Return the new offset as a poly_int64_pod
rather than a HOST_WIDE_INT.
(instantiate_virtual_regs_in_rtx): Track polynomial offsets.
(instantiate_virtual_regs_in_insn): Likewise.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r255920
|
|
This patch converts the frame allocation code (mostly in function.c)
to use poly_int64 rather than HOST_WIDE_INT for frame offsets and
sizes.
2017-12-21 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* function.h (frame_space): Change start and length from HOST_WIDE_INT
to poly_int64.
(get_frame_size): Return the size as a poly_int64 rather than a
HOST_WIDE_INT.
(frame_offset_overflow): Take the offset as a poly_int64 rather
than a HOST_WIDE_INT.
(assign_stack_local_1, assign_stack_local, assign_stack_temp_for_type)
(assign_stack_temp): Likewise for the size.
* function.c (get_frame_size): Return a poly_int64 rather than
a HOST_WIDE_INT.
(frame_offset_overflow): Take the offset as a poly_int64 rather
than a HOST_WIDE_INT.
(try_fit_stack_local): Take the start, length and size as poly_int64s
rather than HOST_WIDE_INTs. Return the offset as a poly_int64_pod
rather than a HOST_WIDE_INT.
(add_frame_space): Take the start and end as poly_int64s rather than
HOST_WIDE_INTs.
(assign_stack_local_1, assign_stack_local, assign_stack_temp_for_type)
(assign_stack_temp): Likewise for the size.
(temp_slot): Change size, base_offset and full_size from HOST_WIDE_INT
to poly_int64.
(find_temp_slot_from_address): Handle polynomial offsets.
(combine_temp_slots): Likewise.
* emit-rtl.h (rtl_data::x_frame_offset): Change from HOST_WIDE_INT
to poly_int64.
* cfgexpand.c (alloc_stack_frame_space): Return the offset as a
poly_int64 rather than a HOST_WIDE_INT.
(expand_one_stack_var_at): Take the offset as a poly_int64 rather
than a HOST_WIDE_INT.
(expand_stack_vars, expand_one_stack_var_1, expand_used_vars): Handle
polynomial frame offsets.
* config/m32r/m32r-protos.h (m32r_compute_frame_size): Take the size
as a poly_int64 rather than an int.
* config/m32r/m32r.c (m32r_compute_frame_size): Likewise.
* config/v850/v850-protos.h (compute_frame_size): Likewise.
* config/v850/v850.c (compute_frame_size): Likewise.
* config/xtensa/xtensa-protos.h (compute_frame_size): Likewise.
* config/xtensa/xtensa.c (compute_frame_size): Likewise.
* config/pa/pa-protos.h (pa_compute_frame_size): Likewise.
* config/pa/pa.c (pa_compute_frame_size): Likewise.
* explow.h (get_dynamic_stack_base): Take the offset as a poly_int64
rather than a HOST_WIDE_INT.
* explow.c (get_dynamic_stack_base): Likewise.
* final.c (final_start_function): Use the constant lower bound
of the frame size for -Wframe-larger-than.
* ira.c (do_reload): Adjust for new get_frame_size return type.
* lra.c (lra): Likewise.
* reload1.c (reload): Likewise.
* config/avr/avr.c (avr_asm_function_end_prologue): Likewise.
* config/pa/pa.h (EXIT_IGNORE_STACK): Likewise.
* rtlanal.c (get_initial_register_offset): Return the offset as
a poly_int64 rather than a HOST_WIDE_INT.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r255917
|
|
This patch changes SUBREG_BYTE from an int to a poly_int.
Since valid SUBREG_BYTEs must be contained within the mode of the
SUBREG_REG, the required range is the same as for GET_MODE_SIZE,
i.e. unsigned short. The patch therefore uses poly_uint16(_pod)
for the SUBREG_BYTE.
Using poly_uint16_pod rtx fields requires a new field code ('p').
Since there are no other uses of 'p' besides SUBREG_BYTE, the patch
doesn't add an XPOLY or whatever; all uses should go via SUBREG_BYTE
instead.
The patch doesn't bother implementing 'p' support for legacy
define_peepholes, since none of the remaining ones have subregs
in their patterns.
As it happened, the rtl documentation used SUBREG as an example of a
code with mixed field types, accessed via XEXP (x, 0) and XINT (x, 1).
Since there's no direct replacement for XINT, and since people should
never use it even if there were, the patch changes the example to use
INT_LIST instead.
The patch also changes subreg-related helper functions so that they too
take and return polynomial offsets. This makes the patch quite big, but
it's mostly mechanical. The patch generally sticks to existing choices
wrt signedness.
2017-12-20 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* doc/rtl.texi: Update documentation of SUBREG_BYTE. Document the
'p' format code. Use INT_LIST rather than SUBREG as the example of
a code with an XINT and an XEXP. Remove the implication that
accessing an rtx field using XINT is expected to work.
* rtl.def (SUBREG): Change format from "ei" to "ep".
* rtl.h (rtunion::rt_subreg): New field.
(XCSUBREG): New macro.
(SUBREG_BYTE): Use it.
(subreg_shape): Change offset from an unsigned int to a poly_uint16.
Update constructor accordingly.
(subreg_shape::operator ==): Update accordingly.
(subreg_shape::unique_id): Return an unsigned HOST_WIDE_INT rather
than an unsigned int.
(subreg_lsb, subreg_lowpart_offset, subreg_highpart_offset): Return
a poly_uint64 rather than an unsigned int.
(subreg_lsb_1): Likewise. Take the offset as a poly_uint64 rather
than an unsigned int.
(subreg_size_offset_from_lsb, subreg_size_lowpart_offset)
(subreg_size_highpart_offset): Return a poly_uint64 rather than
an unsigned int. Take the sizes as poly_uint64s.
(subreg_offset_from_lsb): Return a poly_uint64 rather than
an unsigned int. Take the shift as a poly_uint64 rather than
an unsigned int.
(subreg_regno_offset, subreg_offset_representable_p): Take the offset
as a poly_uint64 rather than an unsigned int.
(simplify_subreg_regno): Likewise.
(byte_lowpart_offset): Return the memory offset as a poly_int64
rather than an int.
(subreg_memory_offset): Likewise. Take the subreg offset as a
poly_uint64 rather than an unsigned int.
(simplify_subreg, simplify_gen_subreg, subreg_get_info)
(gen_rtx_SUBREG, validate_subreg): Take the subreg offset as a
poly_uint64 rather than an unsigned int.
* rtl.c (rtx_format): Describe 'p' in comment.
(copy_rtx, rtx_equal_p_cb, rtx_equal_p): Handle 'p'.
* emit-rtl.c (validate_subreg, gen_rtx_SUBREG): Take the subreg
offset as a poly_uint64 rather than an unsigned int.
(byte_lowpart_offset): Return the memory offset as a poly_int64
rather than an int.
(subreg_memory_offset): Likewise. Take the subreg offset as a
poly_uint64 rather than an unsigned int.
(subreg_size_lowpart_offset, subreg_size_highpart_offset): Take the
mode sizes as poly_uint64s rather than unsigned ints. Return a
poly_uint64 rather than an unsigned int.
(subreg_lowpart_p): Treat subreg offsets as poly_ints.
(copy_insn_1): Handle 'p'.
* rtlanal.c (set_noop_p): Treat subregs offsets as poly_uint64s.
(subreg_lsb_1): Take the subreg offset as a poly_uint64 rather than
an unsigned int. Return the shift in the same way.
(subreg_lsb): Return the shift as a poly_uint64 rather than an
unsigned int.
(subreg_size_offset_from_lsb): Take the sizes and shift as
poly_uint64s rather than unsigned ints. Return the offset as
a poly_uint64.
(subreg_get_info, subreg_regno_offset, subreg_offset_representable_p)
(simplify_subreg_regno): Take the offset as a poly_uint64 rather than
an unsigned int.
* rtlhash.c (add_rtx): Handle 'p'.
* genemit.c (gen_exp): Likewise.
* gengenrtl.c (type_from_format, gendef): Likewise.
* gensupport.c (subst_pattern_match, get_alternatives_number)
(collect_insn_data, alter_predicate_for_insn, alter_constraints)
(subst_dup): Likewise.
* gengtype.c (adjust_field_rtx_def): Likewise.
* genrecog.c (find_operand, find_matching_operand, validate_pattern)
(match_pattern_2): Likewise.
(rtx_test::SUBREG_FIELD): New rtx_test::kind_enum.
(rtx_test::subreg_field): New function.
(operator ==, safe_to_hoist_p, transition_parameter_type)
(print_nonbool_test, print_test): Handle SUBREG_FIELD.
* genattrtab.c (attr_rtx_1): Say that 'p' is deliberately not handled.
* genpeep.c (match_rtx): Likewise.
* print-rtl.c (print_poly_int): Include if GENERATOR_FILE too.
(rtx_writer::print_rtx_operand): Handle 'p'.
(print_value): Handle SUBREG.
* read-rtl.c (apply_int_iterator): Likewise.
(rtx_reader::read_rtx_operand): Handle 'p'.
* alias.c (rtx_equal_for_memref_p): Likewise.
* cselib.c (rtx_equal_for_cselib_1, cselib_hash_rtx): Likewise.
* caller-save.c (replace_reg_with_saved_mem): Treat subreg offsets
as poly_ints.
* calls.c (expand_call): Likewise.
* combine.c (combine_simplify_rtx, expand_field_assignment): Likewise.
(make_extraction, gen_lowpart_for_combine): Likewise.
* loop-invariant.c (hash_invariant_expr_1, invariant_expr_equal_p):
Likewise.
* cse.c (remove_invalid_subreg_refs): Take the offset as a poly_uint64
rather than an unsigned int. Treat subreg offsets as poly_ints.
(exp_equiv_p): Handle 'p'.
(hash_rtx_cb): Likewise. Treat subreg offsets as poly_ints.
(equiv_constant, cse_insn): Treat subreg offsets as poly_ints.
* dse.c (find_shift_sequence): Likewise.
* dwarf2out.c (rtl_for_decl_location): Likewise.
* expmed.c (extract_low_bits): Likewise.
* expr.c (emit_group_store, undefined_operand_subword_p): Likewise.
(expand_expr_real_2): Likewise.
* final.c (alter_subreg): Likewise.
(leaf_renumber_regs_insn): Handle 'p'.
* function.c (assign_parm_find_stack_rtl, assign_parm_setup_stack):
Treat subreg offsets as poly_ints.
* fwprop.c (forward_propagate_and_simplify): Likewise.
* ifcvt.c (noce_emit_move_insn, noce_emit_cmove): Likewise.
* ira.c (get_subreg_tracking_sizes): Likewise.
* ira-conflicts.c (go_through_subreg): Likewise.
* ira-lives.c (process_single_reg_class_operands): Likewise.
* jump.c (rtx_renumbered_equal_p): Likewise. Handle 'p'.
* lower-subreg.c (simplify_subreg_concatn): Take the subreg offset
as a poly_uint64 rather than an unsigned int.
(simplify_gen_subreg_concatn, resolve_simple_move): Treat
subreg offsets as poly_ints.
* lra-constraints.c (operands_match_p): Handle 'p'.
(match_reload, curr_insn_transform): Treat subreg offsets as poly_ints.
* lra-spills.c (assign_mem_slot): Likewise.
* postreload.c (move2add_valid_value_p): Likewise.
* recog.c (general_operand, indirect_operand): Likewise.
* regcprop.c (copy_value, maybe_mode_change): Likewise.
(copyprop_hardreg_forward_1): Likewise.
* reginfo.c (simplifiable_subregs_hasher::hash, simplifiable_subregs)
(record_subregs_of_mode): Likewise.
* rtlhooks.c (gen_lowpart_general, gen_lowpart_if_possible): Likewise.
* reload.c (operands_match_p): Handle 'p'.
(find_reloads_subreg_address): Treat subreg offsets as poly_ints.
* reload1.c (alter_reg, choose_reload_regs): Likewise.
(compute_reload_subreg_offset): Likewise, and return an poly_int64.
* simplify-rtx.c (simplify_truncation, simplify_binary_operation_1):
(test_vector_ops_duplicate): Treat subreg offsets as poly_ints.
(simplify_const_poly_int_tests<N>::run): Likewise.
(simplify_subreg, simplify_gen_subreg): Take the subreg offset as
a poly_uint64 rather than an unsigned int.
* valtrack.c (debug_lowpart_subreg): Likewise.
* var-tracking.c (var_lowpart): Likewise.
(loc_cmp): Handle 'p'.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r255882
|
|
This patch completes the infrastructure for the introduction of
statement frontiers in C-family languages.
It brings in all the code remaining code needed to introduce and
transform begin stmt trees, gimple stmts, insns and notes, and
ultimately use them to generate the is_stmt column in DWARF2+ line
number tables/programs, however none of it is activated: the option
that would do so will be introduced in a subsequent patch.
This patch depends on an earlier patch with not-quite-boilerplate
changes towards SFN.
for gcc/c-family/ChangeLog
* c-semantics.c (pop_stmt_list): Move begin stmt marker into
subsequent statement list.
for gcc/c/ChangeLog
* c-objc-common.h (LANG_HOOKS_EMITS_BEGIN_STMT): Redefine as true.
* c-parser.c (add_debug_begin_stmt): New.
(c_parser_declaration_or_fndef): Call it.
(c_parser_compound_statement_nostart): Likewise.
(c_parser_statement_after_labels): Likewise.
* c-typeck (c_finish_stmt_expr): Skip begin stmts markers.
for gcc/cp/ChangeLog
* constexpr.c (check_constexpr_ctor_body_1): Skip begin stmt
markers.
(constexpr_fn_retval): Likewise.
(potential_constant_expression_1): Likewise.
(cxx_eval_statement_list): Check that a begin stmt marker is
not used as the value of a statement list.
(cxx_eval_constant_expression): Return begin stmt markers
unchanged.
* cp-array-notation.c (stmt_location): New.
(cp_expand_cond_array_notations): Use it.
* cp-objcp-common.h (LANG_HOOKS_EMITS_BEGIN_STMT): Redefine as true.
* parser.c (add_debug_begin_stmt): New.
(cp_parser_statement): Call it.
* pt.c (tsubst_copy): Handle begin stmt markers.
for gcc/ChangeLog
* cfgexpand.c (expand_gimple_basic_block): Handle begin stmt
markers. Integrate source bind into debug stmt expand loop.
(pass_expand::execute): Check debug marker limit. Avoid deep
TER and expand debug locations for debug bind insns only.
* cse.c (insn_live_p): Keep nonbind markers and debug bindings
followed by them.
* df-scan.c (df_insn_delete): Accept out-of-block debug insn.
* final.c (reemit_insn_block_notes): Take current block from
nonbind markers. Declare note where it's first set.
(final_scan_insn): Handle begin stmt notes. Emit is_stmt according to
begin stmt markers if enabled.
(notice_source_line): Handle nonbind markers. Fail if their
location is unknown or that of builtins.
(rest_of_handle_final): Convert begin stmt markers to notes if
var-tracking didn't run.
(rest_of_clean_state): Skip begin stmt markers.
* gimple-pretty-print.c (dump_gimple_debug): Handle begin stmt
markers.
* function.c (allocate_struct_function): Set begin_stmt_markers.
* function.h (struct function): Add debug_marker_count counter
and debug_nonbind_markers flag.
* gimple-iterator.c (gsi_remove): Adjust debug_marker_count.
* gimple-low.c (lower_function_body): Adjust
debug_nonbind_markers.
(lower_stmt): Drop or skip gimple debug stmts.
(lower_try_catch): Skip debug stmts.
* gimple.c (gimple_build_debug_begin_stmt): New.
(gimple_copy): Increment debug_marker_count if copying one.
* gimple.h (gimple_build_debug_begin_stmt): Declare.
* gimplify.c (rexpr_location): New.
(rexpr_has_location): New.
(warn_switch_unreachable_r): Handle gimple debug stmts.
(shortcut_cond_r): Call expr_location.
(find_goto): New.
(find_goto_label): New.
(shortcut_cond_expr): Call expr_has_location, expr_location, and
find_goto_label.
(gimplify_cond_expr): Call find_goto_label, expr_has_location, and
expr_location.
(gimplify_expr): Handle begin stmt markers. Reject debug expr decls.
* langhooks-def.h (LANG_HOOKS_EMITS_BEGIN_STMT): New. Add to...
(LANG_HOOKS_INITIALIZER): ... this.
* langhooks.h (struct lang_hooks): Add emits_begin_stmt.
* lra-contraints.c (inherit_reload_reg): Tolerate between-blocks
debug insns.
(update_ebb_live_info): Skip debug insn markers.
* lra.c (debug_insn_static_data): Rename to...
(debug_bind_static_data): ... this.
(debug_marker_static_data): New.
(lra_set_insn_recog_data): Select one of the above depending
on debug insn kind.
(lra_update_isn_regno_info): Don't assume debug insns have
freqs.
(push_insns): Skip debug insns.
* lto-streamer-in.c (input_function): Drop debug stmts
depending on active options. Adjust debug_nonbind_markers.
* params.def (PARAM_MAX_DEBUG_MARKER_COUNT): New.
* print-rtl.c (rtx_writer::print_rtx_operand_code_0): Handle
begin stmt marker notes.
(print_insn): Likewise.
* recog.c (extract_insn): Recognize rtl for debug markers.
* rtl.def (DEBUG_MARKER): New.
* tree-inline.c: Include params.h.
(remap_gimple_stmt): Handle nonbind markers.
(maybe_move_debug_stmts_to_successors): Likewise.
(copy_debug_stmt): Likewise.
* tree-iterator.c (append_to_statement_list_1): Append begin stmt
markers regardless of no side effects.
(tsi_link_before): Don't update container's side effects when adding
a begin stmt marker.
(tsi_link_after): Likewise.
(expr_first): Skip begin stmt markers.
(expr_last): Likewise.
* tree-pretty-print (dump_generic_node): Handle begin stmt markers.
* tree-ssa-threadedge.c (propagate_threaded_block_debug_info):
Disregard nonbind markers.
* tree.c (make_node_stat): Don't set side effects for begin stmt
markers.
(build1_stat): Likewise.
* tree.def (DEBUG_BEGIN_STMT): New.
* tree.h (GOTO_DESTINATION): Require a GOTO_EXPR.
* var-tracking.c (delete_debug_insns): Renamed to...
(delete_vta_debug_insns): ... this.
(reemit_marker_as_note): New.
(vt_initialize): Reemit markers.
(delete_vta_debug_insns): Likewise.
(vt_debug_insns_local): Reemit or delete markers.
(variable_tracking_main_1): Likewise.
* doc/generic.texi (DEBUG_BEGIN_STMT): Document.
* doc/gimple.texi (gimple_debug_begin_stmt_p): New.
(gimple_debug_nonbind_marker_p): New.
(gimple_build_debug_bind): Adjust.
(gimple_build_debug_begin_stmt): New.
* doc/invoke.texi (max-debug-marker-count): New param.
* doc/rtl.texi (debug_implicit_ptr, entry_value): New.
(debug_parameter_ref, debug_marker): New.
(NOTE_INSN_BEGIN_STMT): New.
(DEBUG_INSN): Describe begin stmt markers.
From-SVN: r255568
|
|
This patch introduces a number of new macros and functions that will
be used to distinguish between different kinds of debug stmts, insns
and notes, namely, preexisting debug bind ones and to-be-introduced
nonbind markers.
In a seemingly mechanical way, it adjusts several uses of the macros
and functions, so that they refer to narrower categories when
appropriate.
These changes, by themselves, should not have any visible effect in
the compiler behavior, since the upcoming debug markers are never
created with this patch alone.
for gcc/ChangeLog
* gimple.h (enum gimple_debug_subcode): Add
GIMPLE_DEBUG_BEGIN_STMT.
(gimple_debug_begin_stmt_p): New.
(gimple_debug_nonbind_marker_p): New.
* tree.h (MAY_HAVE_DEBUG_MARKER_STMTS): New.
(MAY_HAVE_DEBUG_BIND_STMTS): Renamed from....
(MAY_HAVE_DEBUG_STMTS): ... this. Check both.
* insn-notes.def (BEGIN_STMT): New.
* rtl.h (MAY_HAVE_DEBUG_MARKER_INSNS): New.
(MAY_HAVE_DEBUG_BIND_INSNS): Renamed from....
(MAY_HAVE_DEBUG_INSNS): ... this. Check both.
(NOTE_MARKER_LOCATION, NOTE_MARKER_P): New.
(DEBUG_BIND_INSN_P, DEBUG_MARKER_INSN_P): New.
(INSN_DEBUG_MARKER_KIND): New.
(GEN_RTX_DEBUG_MARKER_BEGIN_STMT_PAT): New.
(INSN_VAR_LOCATION): Check for VAR_LOCATION.
(INSN_VAR_LOCATION_PTR): New.
* cfgexpand.c (expand_debug_locations): Handle debug bind insns
only.
(expand_gimple_basic_block): Likewise. Emit debug temps for TER
deps only if debug bind insns are enabled.
(pass_expand::execute): Avoid deep TER and expand
debug locations for debug bind insns only.
* cgraph.c (cgraph_edge::redirect_call_stmt_to_callee): Narrow
debug stmts special handling down to debug bind stmts.
* combine.c (try_combine): Narrow debug insns special handling
down to debug bind insns.
* cse.c (delete_trivially_dead_insns): Handle debug bindings.
Narrow debug insns preexisting special handling down to debug
bind insns.
* dce.c (rest_of_handle_ud_dce): Narrow debug insns special
handling down to debug bind insns.
* function.c (instantiate_virtual_regs): Skip debug markers,
adjust handling of debug binds.
* gimple-ssa-backprop.c (backprop::prepare_change): Try debug
temp insertion iff MAY_HAVE_DEBUG_BIND_STMTS.
* haifa-sched.c (schedule_insn): Narrow special handling of debug
insns to debug bind insns.
* ipa-param-manipulation.c (ipa_modify_call_arguments): Narrow
special handling of debug stmts to debug bind stmts.
* ipa-split.c (split_function): Likewise.
* ira.c (combine_and_move_insns): Adjust debug bind insns only.
* loop-unroll.c (apply_opt_in_copies): Adjust tests on bind
debug insns.
* reg-stack.c (convert_regs_1): Use DEBUG_BIND_INSN_P.
* regrename.c (build_def_use): Likewise.
* regcprop.c (copyprop_hardreg_forward_1): Likewise.
(pass_cprop_hardreg): Narrow special casing of debug insns to
debug bind insns.
* regstat.c (regstat_init_n_sets_and_refs): Likewise.
* reload1.c (reload): Likewise.
* sese.c (sese_insert_phis_for_liveouts): Narrow special
casing of debug stmts to debug bind stmts.
* shrink-wrap.c (move_insn_for_shrink_wrap): Likewise.
* ssa-iterators.h (num_imm_uses): Likewise.
* tree-cfg.c (gimple_merge_blocks): Narrow special casing of
debug stmts to debug bind stmts.
* tree-inline.c (tree_function_versioning): Narrow special casing
of debug stmts to debug bind stmts.
* tree-loop-distribution.c (generate_loops_for_partition):
Narrow special casing of debug stmts to debug bind stmts.
* tree-sra.c (analyze_access_subtree): Narrow special casing
of debug stmts to debug bind stmts.
* tree-ssa-dce.c (remove_dead_stmt): Narrow special casing of debug
stmts to debug bind stmts.
* tree-ssa-loop-ivopt.c (remove_unused_ivs): Narrow special
casing of debug stmts to debug bind stmts.
* tree-ssa-reassoc.c (reassoc_remove_stmt): Likewise.
* tree-ssa-tail-merge.c (tail_merge_optimize): Narrow special
casing of debug stmts to debug bind stmts.
* tree-ssa-threadedge.c (propagate_threaded_block_debug_info):
Likewise.
* tree-ssa.c (flush_pending_stmts): Narrow special casing of
debug stmts to debug bind stmts.
(gimple_replace_ssa_lhs): Likewise.
(insert_debug_temp_for_var_def): Likewise.
(insert_debug_temps_for_defs): Likewise.
(reset_debug_uses): Likewise.
* tree-ssanames.c (release_ssa_name_fn): Likewise.
* tree-vect-loop-manip.c (adjust_debug_stmts_now): Likewise.
(adjust_debug_stmts): Likewise.
(adjust_phi_and_debug_stmts): Likewise.
(vect_do_peeling): Likewise.
* tree-vect-loop.c (vect_transform_loop): Likewise.
* valtrack.c (propagate_for_debug): Use BIND_DEBUG_INSN_P.
* var-tracking.c (adjust_mems): Narrow special casing of debug
insns to debug bind insns.
(dv_onepart_p, dataflow_set_clar_at_call, use_type): Likewise.
(compute_bb_dataflow, vt_find_locations): Likewise.
(vt_expand_loc, emit_notes_for_changes): Likewise.
(vt_init_cfa_base): Likewise.
(vt_emit_notes): Likewise.
(vt_initialize): Likewise.
(vt_finalize): Likewise.
From-SVN: r255565
|
|
PR c++/60336
PR middle-end/67239
PR target/68355
* c-decl.c (grokdeclarator): Set DECL_PADDING_P on unnamed bit-fields.
* class.c (layout_class_type): Set DECL_PADDING_P on padding.
* decl.c (cxx_init_decl_processing): Set TRANSLATION_UNIT_WARN_EMPTY_P.
(grokdeclarator): Set DECL_PADDING_P on unnamed bit-fields.
* lto.c (compare_tree_sccs_1): Compare TYPE_EMPTY_P and DECL_PADDING_P.
* calls.c (initialize_argument_information): Call
warn_parameter_passing_abi target hook.
(store_one_arg): Use 0 for empty record size. Don't push 0 size
argument onto stack.
(must_pass_in_stack_var_size_or_pad): Return false for empty types.
* common.opt: Update -fabi-version description.
* config/i386/i386.c (init_cumulative_args): Set cum->warn_empty.
(ix86_gimplify_va_arg): Call arg_int_size_in_bytes instead of
int_size_in_bytes.
(ix86_is_empty_record): New function.
(ix86_warn_parameter_passing_abi): New function.
(TARGET_EMPTY_RECORD_P): Redefine.
(TARGET_WARN_PARAMETER_PASSING_ABI): Redefine.
* config/i386/i386.h (CUMULATIVE_ARGS): Add warn_empty.
* doc/tm.texi: Regenerated.
* doc/tm.texi.in (TARGET_EMPTY_RECORD_P,
TARGET_WARN_PARAMETER_PASSING_ABI): Add.
* dwarf2out.c (get_ultimate_context): Move to tree.c.
* explow.c (hard_function_value): Call arg_int_size_in_bytes
instead of int_size_in_bytes.
* expr.c (copy_blkmode_to_reg): Likewise.
* function.c (aggregate_value_p): Return 0 for empty types.
(assign_parm_find_entry_rtl): Call warn_parameter_passing_abi target hook.
(locate_and_pad_parm): Call arg size_in_bytes instead
size_in_bytes.
* lto-streamer-out.c (hash_tree): Hash TYPE_EMPTY_P and DECL_PADDING_P.
* stor-layout.c (finalize_type_size): Set TYPE_EMPTY_P.
* target.def (empty_record_p, warn_parameter_passing_abi): New target
hooks.
* targhooks.c (hook_void_CUMULATIVE_ARGS_tree): New hook.
(std_gimplify_va_arg_expr): Skip empty records. Call
arg_size_in_bytes instead size_in_bytes.
* targhooks.h (hook_void_CUMULATIVE_ARGS_tree): Declare.
* tree-core.h (tree_type_common): Add empty_flag.
(tree_decl_common): Update comments.
* tree-streamer-in.c (unpack_ts_decl_common_value_fields): Stream
DECL_PADDING_P.
(unpack_ts_type_common_value_fields): Stream TYPE_EMPTY_P.
* tree-streamer-out.c (pack_ts_decl_common_value_fields): Stream
DECL_PADDING_P.
(pack_ts_type_common_value_fields): Stream TYPE_EMPTY_P.
* tree.c (default_is_empty_type): New function.
(default_is_empty_record): New function.
(arg_int_size_in_bytes): New function.
(arg_size_in_bytes): New function.
(get_ultimate_context): New function.
* tree.h: Define TYPE_EMPTY_P, DECL_PADDING_P and
TRANSLATION_UNIT_WARN_EMPTY_P.
(default_is_empty_record, arg_int_size_in_bytes,
arg_size_in_bytes, get_ultimate_context): Declare.
* g++.dg/abi/empty12.C: New test.
* g++.dg/abi/empty12.h: New test.
* g++.dg/abi/empty12a.c: New test.
* g++.dg/abi/empty13.C: New test.
* g++.dg/abi/empty13.h: New test.
* g++.dg/abi/empty13a.c: New test.
* g++.dg/abi/empty14.C: New test.
* g++.dg/abi/empty14.h: New test.
* g++.dg/abi/empty14a.c: New test.
* g++.dg/abi/empty15.C: New test.
* g++.dg/abi/empty15.h: New test.
* g++.dg/abi/empty15a.c: New test.
* g++.dg/abi/empty16.C: New test.
* g++.dg/abi/empty16.h: New test.
* g++.dg/abi/empty16a.c: New test.
* g++.dg/abi/empty17.C: New test.
* g++.dg/abi/empty17.h: New test.
* g++.dg/abi/empty17a.c: New test.
* g++.dg/abi/empty18.C: New test.
* g++.dg/abi/empty18.h: New test.
* g++.dg/abi/empty18a.c: New test.
* g++.dg/abi/empty19.C: New test.
* g++.dg/abi/empty19.h: New test.
* g++.dg/abi/empty19a.c: New test.
* g++.dg/abi/empty20.C: New test.
* g++.dg/abi/empty21.C: New test.
* g++.dg/abi/empty22.C: New test.
* g++.dg/abi/empty22.h: New test.
* g++.dg/abi/empty22a.c: New test.
* g++.dg/abi/empty23.C: New test.
* g++.dg/abi/empty24.C: New test.
* g++.dg/abi/empty25.C: New test.
* g++.dg/abi/empty25.h: New test.
* g++.dg/abi/empty25a.c: New test.
* g++.dg/abi/empty26.C: New test.
* g++.dg/abi/empty26.h: New test.
* g++.dg/abi/empty26a.c: New test.
* g++.dg/abi/empty27.C: New test.
* g++.dg/abi/empty28.C: New test.
* g++.dg/abi/pr60336-1.C: New test.
* g++.dg/abi/pr60336-10.C: New test.
* g++.dg/abi/pr60336-11.C: New test.
* g++.dg/abi/pr60336-12.C: New test.
* g++.dg/abi/pr60336-2.C: New test.
* g++.dg/abi/pr60336-3.C: New test.
* g++.dg/abi/pr60336-4.C: New test.
* g++.dg/abi/pr60336-5.C: New test.
* g++.dg/abi/pr60336-6.C: New test.
* g++.dg/abi/pr60336-7.C: New test.
* g++.dg/abi/pr60336-8.C: New test.
* g++.dg/abi/pr60336-9.C: New test.
* g++.dg/abi/pr68355.C: New test.
* g++.dg/lto/pr60336_0.C: New test.
Co-Authored-By: H.J. Lu <hongjiu.lu@intel.com>
Co-Authored-By: Jason Merrill <jason@redhat.com>
From-SVN: r255066
|
|
gcc/
* Makefile.in (OBJS): Delete sdbout.o.
(GTFILES): Delete $(srcdir)/sdbout.c.
* debug.h: Delete sdb_debug_hooks.
* final.c: Delete sdbout.h include.
(final_scan_insn): Delete SDB_DEBUG check.
(rest_of_clean_state): Likewise.
* output.h: Delete sdb_begin_function_line.
* sdbout.c: Delete.
* sdbout.h: Delete.
* toplev.c: Delete sdbout.h include.
(process_options): Delete SDB_DEBUG check.
* tree-core.h (tree_type_common): Delete pointer field of
tree_type_symtab.
* tree.c (copy_node): Clear TYPE_SYMTAB_DIE instead of
TYPE_SYMTAB_POINTER.
* tree.h (TYPE_SYMTAB_POINTER): Delete.
(TYPE_SYMTAB_IS_POINTER): Delete.
(TYPE_SYMTAB_IS_DIE): Renumber.
* xcoffout.c: Refer to former sdbout.c file.
(xcoffout_begin_prologue): Use past tense for sdbout.c reference.
* doc/install.texi (--with-stabs): Delete COFF and ECOFF info.
* doc/invoke.texi (SEEALSO): Delete adb and sdb references.
(Debugging Options): Delete -gcoff.
(-gstabs): Delete SDB reference.
(-gcoff): Delete.
(-gcoff@var{level}): Delete.
* doc/passes.texi (Debugging information output): Delete SDB and
sdbout.c references.
* doc/tm.texi: Regenerate.
* doc/tm.texi.in (DWARF_CIE_DATA_ALIGNMENT): Delete SDB from xref.
(SDB and DWARF): Change node name to DWARF and delete SDB and COFF
references.
(DEBUGGER_AUTO_OFFSET): Delete COFF and SDB references.
(PREFERRED_DEBUGGING_TYPE): Delete SDB_DEBUG and -gcoff references.
(SDB_DEBUGGING_INFO): Delete.
(PUT_SDB_@dots{}, SDB_DELIM, SDB_ALLOW_UNKNOWN_REFERENCES)
SDB_ALLOW_FORWARD_REFERENCES, SDB_OUTPUT_SOURCE_LINE): Delete.
* target.def (output_source_filename): Delete COFF reference.
* common.opt (gcoff): Delete.
(gxcoff+): Update Negative chain.
* defaults.h: Delete all references to SDB_DEBUGGING_INFO and
SDB_DEBUG.
* dwarf2out.c (gen_array_type_die): Change SDB to debuggers.
* flag-types.h (enum debug_info_type): Delete SDB_DEBUG.
* function.c (number_blocks): Delete SDB_DEBUGGING_INFO, SDB_DEBUG,
and SDB references.
(expand_function_start): Change sdb reference to past tense.
(expand_function_end): Change sdb reference to past tense.
* gcc.c (cpp_unique_options): Delete gcoff3 reference.
* opts.c (debug_type_names): Delete coff entry.
(common_handle_option): Delete OPT_gcoff case.
* system.h (SDB_DEBUG, SDB_DEBUGGING_INFO): Poison.
* config/dbxcoff.h (PREFERRED_DEBUGGING_TYPE): Set to DBX_DEBUG.
* config/cris/cris.h: Delete SDB reference in comment.
* config/i386/cygming.h: Don't define SDB_DEBUGGING_INFO.
(ASM_DECLARE_FUNCTION_NAME): Delete SDB reference from comment.
* config/i386/gas.h: Don't define SDB_DEBUGGING_INFO.
* config/i386/i386.c (svr4_dbx_register_map): Change SDB references
to past tense.
(ix86_expand_prologue): Likewise.
* config/i386/winnt.c (i386_pe_start_function): Don't check SDB_DEBUG.
* config/ia64/ia64.h: Likewise.
* config/m68k/m68kelf.h (DBX_REGISTER_NUMBER): Delete SDB reference.
* config/mips/mips.h (SUBTARGET_ASM_DEBUGGING_SPEC): Delete gcoff*
support.
* config/mmix/mmix.h: Likewise.
* config/nds32/nds32.c: Likewise.
* config/stormy/storym16.h: Likewise.
* config/visium/visium.h: Likewise.
* config/vx-common.h (SDB_DEBUGGING_INFO): Delete undef.
gcc/fortran/
* invoke.texi: Delete adb and sdb references.
gccc/testsuite/
* lib/gcc-dg.exp (gcc-dg-debug-runtest): Delete -gcoff.
* lib/gfortran-dg.exp (gfortran-dg-debug-runtest): Delete
-gcoff.
From-SVN: r254206
|
|
I took the documentation of the FRAME_GROWS_DOWNWARD behaviour from the
version that was in most header files, since the one in the manual seemed
less clear.
The patch deliberately keeps FIRST_PARM_OFFSET(FNDECL) in
microblaze_starting_frame_offset; this seems to be a port-local
convention and takes advantage of the fact that FIRST_PARM_OFFSET
doesn't read FNDECL.
2017-10-23 Richard Sandiford <richard.sandiford@linaro.org>
gcc/
* target.def (starting_frame_offset): New hook.
* doc/tm.texi (STARTING_FRAME_OFFSET): Remove in favor of...
(TARGET_STARTING_FRAME_OFFSET): ...this new hook.
* doc/tm.texi.in: Regenerate.
* hooks.h (hook_hwi_void_0): Declare.
* hooks.c (hook_hwi_void_0): New function.
* doc/rtl.texi: Refer to TARGET_STARTING_FRAME_OFFSET instead of
STARTING_FRAME_OFFSET.
* builtins.c (expand_builtin_setjmp_receiver): Likewise.
* reload1.c (reload): Likewise.
* cfgexpand.c (expand_used_vars): Use targetm.starting_frame_offset
instead of STARTING_FRAME_OFFSET.
* function.c (try_fit_stack_local): Likewise.
(assign_stack_local_1): Likewise
(instantiate_virtual_regs): Likewise.
* rtlanal.c (rtx_addr_can_trap_p_1): Likewise.
* config/avr/avr.md (nonlocal_goto_receiver): Likewise.
* config/aarch64/aarch64.h (STARTING_FRAME_OFFSET): Delete.
* config/alpha/alpha.h (STARTING_FRAME_OFFSET): Likewise.
* config/arc/arc.h (STARTING_FRAME_OFFSET): Likewise.
* config/arm/arm.h (STARTING_FRAME_OFFSET): Likewise.
* config/bfin/bfin.h (STARTING_FRAME_OFFSET): Likewise.
* config/c6x/c6x.h (STARTING_FRAME_OFFSET): Likewise.
* config/cr16/cr16.h (STARTING_FRAME_OFFSET): Likewise.
* config/cris/cris.h (STARTING_FRAME_OFFSET): Likewise.
* config/fr30/fr30.h (STARTING_FRAME_OFFSET): Likewise.
* config/frv/frv.h (STARTING_FRAME_OFFSET): Likewise.
* config/ft32/ft32.h (STARTING_FRAME_OFFSET): Likewise.
* config/h8300/h8300.h (STARTING_FRAME_OFFSET): Likewise.
* config/i386/i386.h (STARTING_FRAME_OFFSET): Likewise.
* config/ia64/ia64.h (STARTING_FRAME_OFFSET): Likewise.
* config/m32c/m32c.h (STARTING_FRAME_OFFSET): Likewise.
* config/m68k/m68k.h (STARTING_FRAME_OFFSET): Likewise.
* config/mcore/mcore.h (STARTING_FRAME_OFFSET): Likewise.
* config/mn10300/mn10300.h (STARTING_FRAME_OFFSET): Likewise.
* config/moxie/moxie.h (STARTING_FRAME_OFFSET): Likewise.
* config/msp430/msp430.h (STARTING_FRAME_OFFSET): Likewise.
* config/nds32/nds32.h (STARTING_FRAME_OFFSET): Likewise.
* config/nios2/nios2.h (STARTING_FRAME_OFFSET): Likewise.
* config/nvptx/nvptx.h (STARTING_FRAME_OFFSET): Likewise.
* config/pdp11/pdp11.h (STARTING_FRAME_OFFSET): Likewise.
* config/riscv/riscv.h (STARTING_FRAME_OFFSET): Likewise.
* config/rl78/rl78.h (STARTING_FRAME_OFFSET): Likewise.
* config/rx/rx.h (STARTING_FRAME_OFFSET): Likewise.
* config/s390/s390.h (STARTING_FRAME_OFFSET): Likewise.
* config/sh/sh.h (STARTING_FRAME_OFFSET): Likewise.
* config/sparc/sparc.c (sparc_compute_frame_size): Likewise.
* config/sparc/sparc.h (STARTING_FRAME_OFFSET): Likewise.
* config/spu/spu.h (STARTING_FRAME_OFFSET): Likewise.
* config/stormy16/stormy16.h (STARTING_FRAME_OFFSET): Likewise.
* config/tilegx/tilegx.h (STARTING_FRAME_OFFSET): Likewise.
* config/tilepro/tilepro.h (STARTING_FRAME_OFFSET): Likewise.
* config/v850/v850.h (STARTING_FRAME_OFFSET): Likewise.
* config/visium/visium.h (STARTING_FRAME_OFFSET): Likewise.
* config/avr/avr.h (STARTING_FRAME_OFFSET): Likewise.
* config/avr/avr-protos.h (avr_starting_frame_offset): Likewise.
* config/avr/avr.c (avr_starting_frame_offset): Make static and
return a HOST_WIDE_INT.
(avr_builtin_setjmp_frame_value): Use it instead of
STARTING_FRAME_OFFSET.
(TARGET_STARTING_FRAME_OFFSET): Redefine.
* config/epiphany/epiphany.h (STARTING_FRAME_OFFSET): Delete.
* config/epiphany/epiphany.c (epiphany_starting_frame_offset):
New function.
(TARGET_STARTING_FRAME_OFFSET): Redefine.
* config/iq2000/iq2000.h (STARTING_FRAME_OFFSET): Delete.
* config/iq2000/iq2000.c (iq2000_starting_frame_offset): New function.
(TARGET_CONSTANT_ALIGNMENT): Redefine.
* config/lm32/lm32.h (STARTING_FRAME_OFFSET): Delete.
* config/lm32/lm32.c (lm32_starting_frame_offset): New function.
(TARGET_STARTING_FRAME_OFFSET): Redefine.
* config/m32r/m32r.h (STARTING_FRAME_OFFSET): Delete.
* config/m32r/m32r.c (m32r_starting_frame_offset): New function.
(TARGET_STARTING_FRAME_OFFSET): Redefine.
* config/microblaze/microblaze.h (STARTING_FRAME_OFFSET): Delete.
* config/microblaze/microblaze.c (microblaze_starting_frame_offset):
New function.
(TARGET_STARTING_FRAME_OFFSET): Redefine.
* config/mips/mips.h (STARTING_FRAME_OFFSET): Delete.
* config/mips/mips.c (mips_compute_frame_info): Refer to
TARGET_STARTING_FRAME_OFFSET instead of STARTING_FRAME_OFFSET.
(mips_starting_frame_offset): New function.
(TARGET_STARTING_FRAME_OFFSET): Redefine.
* config/mmix/mmix.h (STARTING_FRAME_OFFSET): Delete.
* config/mmix/mmix-protos.h (mmix_starting_frame_offset): Delete.
* config/mmix/mmix.c (mmix_starting_frame_offset): Make static
and return a HOST_WIDE_INT.
(TARGET_STARTING_FRAME_OFFSET): Redefine.
(mmix_initial_elimination_offset): Refer to
TARGET_STARTING_FRAME_OFFSET instead of STARTING_FRAME_OFFSET.
* config/pa/pa.h (STARTING_FRAME_OFFSET): Delete.
* config/pa/pa.c (pa_starting_frame_offset): New function.
(pa_compute_frame_size): Use it instead of STARTING_FRAME_OFFSET.
(pa_expand_prologue): Likewise.
(TARGET_STARTING_FRAME_OFFSET): Redefine.
* config/powerpcspe/aix.h (STARTING_FRAME_OFFSET): Split out
!FRAME_GROWS_DOWNWARD handling to...
(RS6000_STARTING_FRAME_OFFSET): ...this new macro.
* config/powerpcspe/darwin.h (STARTING_FRAME_OFFSET): Split out
!FRAME_GROWS_DOWNWARD handling to...
(RS6000_STARTING_FRAME_OFFSET): ...this new macro.
* config/powerpcspe/powerpcspe.h (STARTING_FRAME_OFFSET): Split out
!FRAME_GROWS_DOWNWARD handling to...
(RS6000_STARTING_FRAME_OFFSET): ...this new macro.
* config/powerpcspe/powerpcspe.c (TARGET_STARTING_FRAME_OFFSET):
Redefine.
(rs6000_starting_frame_offset): New function.
* config/rs6000/aix.h (STARTING_FRAME_OFFSET): Split out
!FRAME_GROWS_DOWNWARD handling to...
(RS6000_STARTING_FRAME_OFFSET): ...this new macro.
* config/rs6000/darwin.h (STARTING_FRAME_OFFSET): Split out
!FRAME_GROWS_DOWNWARD handling to...
(RS6000_STARTING_FRAME_OFFSET): ...this new macro.
* config/rs6000/rs6000.h (STARTING_FRAME_OFFSET): Split out
!FRAME_GROWS_DOWNWARD handling to...
(RS6000_STARTING_FRAME_OFFSET): ...this new macro.
* config/rs6000/rs6000.c (TARGET_STARTING_FRAME_OFFSET): Refine.
(rs6000_starting_frame_offset): New function.
* config/vax/elf.h (STARTING_FRAME_OFFSET): Delete.
* config/vax/vax.h (STARTING_FRAME_OFFSET): Delete.
* config/vax/vax.c (vax_starting_frame_offset): New function.
(vax_expand_prologue): Use it instead of STARTING_FRAME_OFFSET.
(TARGET_STARTING_FRAME_OFFSET): Redefine.
* config/xtensa/xtensa.h (STARTING_FRAME_OFFSET): Delete.
* config/xtensa/xtensa.c (xtensa_starting_frame_offset): New function.
(TARGET_STARTING_FRAME_OFFSET): Redefine.
* system.h (STARTING_FRAME_OFFSET): Poison.
From-SVN: r254003
|
|
* asan.c (handle_builtin_alloca): Deal with all alloca variants.
(get_mem_refs_of_builtin_call): Likewise.
* builtins.c (expand_builtin_apply): Adjust call to
allocate_dynamic_stack_space.
(expand_builtin_alloca): For __builtin_alloca_with_align_and_max, pass
the third argument to allocate_dynamic_stack_space, otherwise -1.
(expand_builtin): Deal with all alloca variants.
(is_inexpensive_builtin): Likewise.
* builtins.def (BUILT_IN_ALLOCA_WITH_ALIGN_AND_MAX): New.
* calls.c (special_function_p): Deal with all alloca variants.
(initialize_argument_information): Adjust call to
allocate_dynamic_stack_space.
(expand_call): Likewise.
* cfgexpand.c (expand_call_stmt): Deal with all alloca variants.
* doc/extend.texi (Built-ins): Add __builtin_alloca_with_align_and_max
* explow.c (allocate_dynamic_stack_space): Add MAX_SIZE parameter and
use it for the stack usage computation.
* explow.h (allocate_dynamic_stack_space): Adjust prototype.
* function.c (gimplify_parameters): Turn BUILT_IN_ALLOCA_WITH_ALIGN
into BUILT_IN_ALLOCA_WITH_ALIGN_AND_MAX and pass maximum size.
* gimple-ssa-warn-alloca.c (alloca_call_type): Simplify control flow.
Take into account 3rd argument of __builtin_alloca_with_align_and_max.
(in_loop_p): Remove first argument and useless check.
(pass_walloca::execute): Remove useless test and adjust call to above.
* gimple.c (gimple_build_call_from_tree): Deal with all alloc variants
* gimplify.c (gimplify_vla_decl): Turn BUILT_IN_ALLOCA_WITH_ALIGN into
BUILT_IN_ALLOCA_WITH_ALIGN_AND_MAX and pass maximum size.
(gimplify_call_expr): Deal with all alloca variants.
* hsa-gen.c (gen_hsa_alloca): Likewise.
(gen_hsa_insns_for_call): Likewise.
* ipa-pure-const.c (special_builtin_state): Likewise.
* tree-chkp.c (chkp_build_returned_bound): Likewise.
* tree-object-size.c (alloc_object_size): Likewise.
* tree-ssa-alias.c (ref_maybe_used_by_call_p_1): Likewise.
(call_may_clobber_ref_p_1): Likewise.
* tree-ssa-ccp.c (evaluate_stmt): Likewise.
(ccp_fold_stmt): Likewise.
(optimize_stack_restore): Likewise.
* tree-ssa-dce.c (mark_stmt_if_obviously_necessary): Likewise.
(mark_all_reaching_defs_necessary_1): Likewise.
(propagate_necessity): Likewise.
(eliminate_unnecessary_stmts): Likewise.
* tree.c (build_common_builtin_nodes): Build
BUILT_IN_ALLOCA_WITH_ALIGN_AND_MAX.
* tree.h (ALLOCA_FUNCTION_CODE_P): New macro.
(CASE_BUILT_IN_ALLOCA): Likewise.
* varasm.c (incorporeal_function_p): Deal with all alloca variants.
c-family/
* c-common.c (check_builtin_function_arguments): Also check arguments
of __builtin_alloca_with_align_and_max.
From-SVN: r253901
|
|
* function.c (dump_stack_clash_frame_info): New function.
* function.h (dump_stack_clash_frame_info): Prototype.
(enum stack_clash_probes): New enum.
From-SVN: r252997
|
|
2017-09-13 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* target.def (function_arg_offset): New hook.
* targhooks.h (default_function_arg_offset): Declare.
* targhooks.c (default_function_arg_offset): New function.
* function.c (locate_and_pad_parm): Use
targetm.calls.function_arg_offset instead of FUNCTION_ARG_OFFSET.
* doc/tm.texi.in (FUNCTION_ARG_OFFSET): Replace with...
(TARGET_FUNCTION_ARG_OFFSET): ...this.
* doc/tm.texi: Regenerate.
* config/spu/spu.h (FUNCTION_ARG_OFFSET): Delete.
* config/spu/spu.c (spu_function_arg_offset): New function.
(TARGET_FUNCTION_ARG_OFFSET): Redefine.
* system.h (FUNCTION_ARG_OFFSET): Poison.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r252821
|
|
I'm not sure the documentation is correct that outprec is always less
than inprec, and each non-default implementation tested for the case
in which it wasn't, but the patch leaves it as-is.
The SH port had a couple of TRULY_NOOP_TRUNCATION tests that were left
over from the old shmedia port.
2017-09-13 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayard <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* target.def (truly_noop_truncation): New hook.
(mode_rep_extended): Refer to TARGET_TRULY_NOOP_TRUNCATION rather
than TRULY_NOOP_TRUNCATION.
* hooks.h (hook_bool_uint_uint_true): Declare.
* hooks.c (hook_bool_uint_uint_true): New function.
* doc/tm.texi.in (TRULY_NOOP_TRUNCATION): Replace with...
(TARGET_TRULY_NOOP_TRUNCATION): ...this.
* doc/tm.texi: Regenerate.
* combine.c (make_extraction): Refer to TARGET_TRULY_NOOP_TRUNCATION
rather than TRULY_NOOP_TRUNCATION in comments.
(simplify_comparison): Likewise.
(record_truncated_value): Likewise.
* expmed.c (extract_bit_field_1): Likewise.
(extract_split_bit_field): Likewise.
* convert.c (convert_to_integer_1): Use targetm.truly_noop_truncation
instead of TRULY_NOOP_TRUNCATION.
* function.c (assign_parm_setup_block): Likewise.
* machmode.h (TRULY_NOOP_TRUNCATION_MODES_P): Likewise.
* rtlhooks.c: Include target.h.
* config/aarch64/aarch64.h (TRULY_NOOP_TRUNCATION): Delete.
* config/alpha/alpha.h (TRULY_NOOP_TRUNCATION): Delete.
* config/arc/arc.h (TRULY_NOOP_TRUNCATION): Delete.
* config/arm/arm.h (TRULY_NOOP_TRUNCATION): Delete.
* config/avr/avr.h (TRULY_NOOP_TRUNCATION): Delete.
* config/bfin/bfin.h (TRULY_NOOP_TRUNCATION): Delete.
* config/c6x/c6x.h (TRULY_NOOP_TRUNCATION): Delete.
* config/cr16/cr16.h (TRULY_NOOP_TRUNCATION): Delete.
* config/cris/cris.h (TRULY_NOOP_TRUNCATION): Delete.
* config/epiphany/epiphany.h (TRULY_NOOP_TRUNCATION): Delete.
* config/fr30/fr30.h (TRULY_NOOP_TRUNCATION): Delete.
* config/frv/frv.h (TRULY_NOOP_TRUNCATION): Delete.
* config/ft32/ft32.h (TRULY_NOOP_TRUNCATION): Delete.
* config/h8300/h8300.h (TRULY_NOOP_TRUNCATION): Delete.
* config/i386/i386.h (TRULY_NOOP_TRUNCATION): Delete.
* config/ia64/ia64.h (TRULY_NOOP_TRUNCATION): Delete.
* config/iq2000/iq2000.h (TRULY_NOOP_TRUNCATION): Delete.
* config/lm32/lm32.h (TRULY_NOOP_TRUNCATION): Delete.
* config/m32c/m32c.h (TRULY_NOOP_TRUNCATION): Delete.
* config/m32r/m32r.h (TRULY_NOOP_TRUNCATION): Delete.
* config/m68k/m68k.h (TRULY_NOOP_TRUNCATION): Delete.
* config/mcore/mcore.h (TRULY_NOOP_TRUNCATION): Delete.
* config/microblaze/microblaze.h (TRULY_NOOP_TRUNCATION): Delete.
* config/mips/mips.h (TRULY_NOOP_TRUNCATION): Delete.
* config/mips/mips.c (mips_truly_noop_truncation): New function.
(TARGET_TRULY_NOOP_TRUNCATION): Redefine.
* config/mips/mips.md: Refer to TARGET_TRULY_NOOP_TRUNCATION
rather than TRULY_NOOP_TRUNCATION in comments.
* config/mmix/mmix.h (TRULY_NOOP_TRUNCATION): Delete.
* config/mn10300/mn10300.h (TRULY_NOOP_TRUNCATION): Delete.
* config/moxie/moxie.h (TRULY_NOOP_TRUNCATION): Delete.
* config/msp430/msp430.h (TRULY_NOOP_TRUNCATION): Delete.
* config/nds32/nds32.h (TRULY_NOOP_TRUNCATION): Delete.
* config/nios2/nios2.h (TRULY_NOOP_TRUNCATION): Delete.
* config/nvptx/nvptx.h (TRULY_NOOP_TRUNCATION): Delete.
* config/pa/pa.h (TRULY_NOOP_TRUNCATION): Delete.
* config/pdp11/pdp11.h (TRULY_NOOP_TRUNCATION): Delete.
* config/powerpcspe/powerpcspe.h (TRULY_NOOP_TRUNCATION): Delete.
* config/riscv/riscv.h (TRULY_NOOP_TRUNCATION): Delete.
* config/riscv/riscv.md: Refer to TARGET_TRULY_NOOP_TRUNCATION
rather than TRULY_NOOP_TRUNCATION in comments.
* config/rl78/rl78.h (TRULY_NOOP_TRUNCATION): Delete.
* config/rs6000/rs6000.h (TRULY_NOOP_TRUNCATION): Delete.
* config/rx/rx.h (TRULY_NOOP_TRUNCATION): Delete.
* config/s390/s390.h (TRULY_NOOP_TRUNCATION): Delete.
* config/sh/sh.h (MAYBE_BASE_REGISTER_RTX_P): Remove
TRULY_NOOP_TRUNCATION condition.
(MAYBE_INDEX_REGISTER_RTX_P): Likewise.
(TRULY_NOOP_TRUNCATION): Delete.
* config/sparc/sparc.h (TRULY_NOOP_TRUNCATION): Delete.
* config/spu/spu.h (TRULY_NOOP_TRUNCATION): Delete.
* config/spu/spu.c (spu_truly_noop_truncation): New function.
(TARGET_TRULY_NOOP_TRUNCATION): Redefine.
* config/stormy16/stormy16.h (TRULY_NOOP_TRUNCATION): Delete.
* config/tilegx/tilegx.h (TRULY_NOOP_TRUNCATION): Delete.
* config/tilegx/tilegx.c (tilegx_truly_noop_truncation): New fuction.
(TARGET_TRULY_NOOP_TRUNCATION): Redefine.
* config/tilegx/tilegx.md: Refer to TARGET_TRULY_NOOP_TRUNCATION
rather than TRULY_NOOP_TRUNCATION in comments.
* config/tilepro/tilepro.h (TRULY_NOOP_TRUNCATION): Delete.
* config/v850/v850.h (TRULY_NOOP_TRUNCATION): Delete.
* config/vax/vax.h (TRULY_NOOP_TRUNCATION): Delete.
* config/visium/visium.h (TRULY_NOOP_TRUNCATION): Delete.
* config/xtensa/xtensa.h (TRULY_NOOP_TRUNCATION): Delete.
* system.h (TRULY_NOOP_TRUNCATION): Poison.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r252818
|
|
This patch converts hard_regno_nregs into an inline function, which
in turn allows hard_regno_nregs to be used as the name of a targetm
field. This is just a mechanical change.
2017-09-12 Richard Sandiford <richard.sandiford@linaro.org>
gcc/
* regs.h (hard_regno_nregs): Turn into a function.
(end_hard_regno): Update accordingly.
* caller-save.c (setup_save_areas): Likewise.
(save_call_clobbered_regs): Likewise.
(replace_reg_with_saved_mem): Likewise.
(insert_restore): Likewise.
(insert_save): Likewise.
* combine.c (can_change_dest_mode): Likewise.
(move_deaths): Likewise.
(distribute_notes): Likewise.
* config/mips/mips.c (mips_hard_regno_call_part_clobbered): Likewise.
* config/powerpcspe/powerpcspe.c (rs6000_cannot_change_mode_class)
(rs6000_split_multireg_move): Likewise.
(rs6000_register_move_cost): Likewise.
(rs6000_memory_move_cost): Likewise.
* config/rs6000/rs6000.c (rs6000_cannot_change_mode_class): Likewise.
(rs6000_split_multireg_move): Likewise.
(rs6000_register_move_cost): Likewise.
(rs6000_memory_move_cost): Likewise.
* cselib.c (cselib_reset_table): Likewise.
(cselib_lookup_1): Likewise.
* emit-rtl.c (set_mode_and_regno): Likewise.
* function.c (aggregate_value_p): Likewise.
* ira-color.c (setup_profitable_hard_regs): Likewise.
(check_hard_reg_p): Likewise.
(calculate_saved_nregs): Likewise.
(assign_hard_reg): Likewise.
(improve_allocation): Likewise.
(calculate_spill_cost): Likewise.
* ira-emit.c (modify_move_list): Likewise.
* ira-int.h (ira_hard_reg_set_intersection_p): Likewise.
(ira_hard_reg_in_set_p): Likewise.
* ira.c (setup_reg_mode_hard_regset): Likewise.
(clarify_prohibited_class_mode_regs): Likewise.
(check_allocation): Likewise.
* lra-assigns.c (find_hard_regno_for_1): Likewise.
(lra_setup_reg_renumber): Likewise.
(setup_try_hard_regno_pseudos): Likewise.
(spill_for): Likewise.
(assign_hard_regno): Likewise.
(setup_live_pseudos_and_spill_after_risky_transforms): Likewise.
* lra-constraints.c (in_class_p): Likewise.
(lra_constraint_offset): Likewise.
(simplify_operand_subreg): Likewise.
(lra_constraints): Likewise.
(split_reg): Likewise.
(split_if_necessary): Likewise.
(invariant_p): Likewise.
(inherit_in_ebb): Likewise.
* lra-lives.c (process_bb_lives): Likewise.
* lra-remat.c (reg_overlap_for_remat_p): Likewise.
(get_hard_regs): Likewise.
(do_remat): Likewise.
* lra-spills.c (assign_spill_hard_regs): Likewise.
* mode-switching.c (create_pre_exit): Likewise.
* postreload.c (reload_combine_recognize_pattern): Likewise.
* recog.c (peep2_find_free_register): Likewise.
* regcprop.c (kill_value_regno): Likewise.
(set_value_regno): Likewise.
(copy_value): Likewise.
(maybe_mode_change): Likewise.
(find_oldest_value_reg): Likewise.
(copyprop_hardreg_forward_1): Likewise.
* regrename.c (check_new_reg_p): Likewise.
(regrename_do_replace): Likewise.
* reload.c (push_reload): Likewise.
(combine_reloads): Likewise.
(find_dummy_reload): Likewise.
(operands_match_p): Likewise.
(find_reloads): Likewise.
(find_equiv_reg): Likewise.
(reload_adjust_reg_for_mode): Likewise.
* reload1.c (count_pseudo): Likewise.
(count_spilled_pseudo): Likewise.
(find_reg): Likewise.
(clear_reload_reg_in_use): Likewise.
(free_for_value_p): Likewise.
(allocate_reload_reg): Likewise.
(choose_reload_regs): Likewise.
(reload_adjust_reg_for_temp): Likewise.
(emit_reload_insns): Likewise.
(delete_output_reload): Likewise.
* rtlanal.c (subreg_get_info): Likewise.
* sched-deps.c (sched_analyze_reg): Likewise.
* sel-sched.c (init_regs_for_mode): Likewise.
(mark_unavailable_hard_regs): Likewise.
(choose_best_reg_1): Likewise.
(verify_target_availability): Likewise.
* valtrack.c (dead_debug_insert_temp): Likewise.
* var-tracking.c (track_loc_p): Likewise.
(emit_note_insn_var_location): Likewise.
* varasm.c (make_decl_rtl): Likewise.
* reginfo.c (choose_hard_reg_mode): Likewise.
(init_reg_modes_target): Refer directly to
this_target_regs->x_hard_regno_nregs.
From-SVN: r252014
|
|
This patch converts more places that could use int_mode_for_size instead
of mode_for_size. This is in preparation for an upcoming patch that
makes mode_for_size itself return an opt_mode.
require () seems like the right choice in expand_builtin_powi
because we have got past the point of backing out. We go on to do:
op1 = expand_expr (arg1, NULL_RTX, mode2, EXPAND_NORMAL);
if (GET_MODE (op1) != mode2)
op1 = convert_to_mode (mode2, op1, 0);
which would be invalid for (and have failed for) BLKmode.
In get_builtin_sync_mode and expand_ifn_atomic_compare_exchange,
the possible bitsizes are {8, 16, 32, 64, 128}, all of which give
target-independent integer modes (up to TImode). The comment above
the call in get_builtin_sync_mode makes clear that an integer mode
must be found.
We can use require () in expand_builtin_atomic_clear and
expand_builtin_atomic_test_and_set because there's always an integer
mode for the boolean type. The same goes for the POINTER_SIZE request
in layout_type. Similarly we can use require () in combine_instructions
and gen_lowpart_common because there's always an integer mode for
HOST_BITS_PER_WIDE_INT (DImode when BITS_PER_UNIT == 8), and
HOST_BITS_PER_DOUBLE_INT (TImode).
The calls in aarch64_function_value, arm_function_value,
aapcs_allocate_return_reg and mips_function_value_1 are handling
cases in which a big-endian target passes or returns values at
the most significant end of a register. In each case the ABI
constrains the size to a small amount and does not handle
non-power-of-2 sizes wider than a word.
The calls in c6x_expand_movmem, i386.c:emit_memset,
lm32_block_move_inline, microblaze_block_move_straight and
mips_block_move_straight are dealing with expansions of
block memory operations using register-wise operations,
and those registers must have non-BLK mode.
The reason for using require () in ix86_expand_sse_cmp,
mips_expand_ins_as_unaligned_store, spu.c:adjust_operand and
spu_emit_branch_and_set is that we go on to emit non-call
instructions that use registers of that mode, which wouldn't
be valid for BLKmode.
2017-09-05 Richard Sandiford <richard.sandiford@linaro.org>
gcc/
* builtins.c (expand_builtin_powi): Use int_mode_for_size.
(get_builtin_sync_mode): Likewise.
(expand_ifn_atomic_compare_exchange): Likewise.
(expand_builtin_atomic_clear): Likewise.
(expand_builtin_atomic_test_and_set): Likewise.
(fold_builtin_atomic_always_lock_free): Likewise.
* calls.c (compute_argument_addresses): Likewise.
(emit_library_call_value_1): Likewise.
(store_one_arg): Likewise.
* combine.c (combine_instructions): Likewise.
* config/aarch64/aarch64.c (aarch64_function_value): Likewise.
* config/arm/arm.c (arm_function_value): Likewise.
(aapcs_allocate_return_reg): Likewise.
* config/c6x/c6x.c (c6x_expand_movmem): Likewise.
* config/i386/i386.c (construct_container): Likewise.
(ix86_gimplify_va_arg): Likewise.
(ix86_expand_sse_cmp): Likewise.
(emit_memmov): Likewise.
(emit_memset): Likewise.
(expand_small_movmem_or_setmem): Likewise.
(ix86_expand_pextr): Likewise.
(ix86_expand_pinsr): Likewise.
* config/lm32/lm32.c (lm32_block_move_inline): Likewise.
* config/microblaze/microblaze.c (microblaze_block_move_straight):
Likewise.
* config/mips/mips.c (mips_function_value_1) Likewise.
(mips_block_move_straight): Likewise.
(mips_expand_ins_as_unaligned_store): Likewise.
* config/powerpcspe/powerpcspe.c
(rs6000_darwin64_record_arg_advance_flush): Likewise.
(rs6000_darwin64_record_arg_flush): Likewise.
* config/rs6000/rs6000.c
(rs6000_darwin64_record_arg_advance_flush): Likewise.
(rs6000_darwin64_record_arg_flush): Likewise.
* config/sparc/sparc.c (sparc_function_arg_1): Likewise.
(sparc_function_value_1): Likewise.
* config/spu/spu.c (adjust_operand): Likewise.
(spu_emit_branch_or_set): Likewise.
(arith_immediate_p): Likewise.
* emit-rtl.c (gen_lowpart_common): Likewise.
* expr.c (expand_expr_real_1): Likewise.
* function.c (assign_parm_setup_block): Likewise.
* gimple-ssa-store-merging.c (encode_tree_to_bitpos): Likewise.
* reload1.c (alter_reg): Likewise.
* stor-layout.c (mode_for_vector): Likewise.
(layout_type): Likewise.
gcc/ada/
* gcc-interface/utils2.c (build_load_modify_store):
Use int_mode_for_size.
From-SVN: r251726
|
|
This involved renaming the rather general-sounding "enum direction" to
"enum pad_direction" to avoid a conflict with the Fortran frontend.
2017-09-04 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* coretypes.h (pad_direction): New enum.
* defaults.h (DEFAULT_FUNCTION_ARG_PADDING): Delete.
(FUNCTION_ARG_PADDING): Likewise.
* target.def (function_arg_padding): New hook.
* targhooks.h (default_function_arg_padding): Declare.
* targhooks.c (default_function_arg_padding): New function.
* doc/tm.texi.in (FUNCTION_ARG_PADDING): Replace with...
(TARGET_FUNCTION_ARG_PADDING): ...this.
* doc/tm.texi: Regenerate.
* calls.c (store_unaligned_arguments_into_pseudos): Use pad_direction
instead of direction.
(compute_argument_addresses): Likewise.
(load_register_parameters): Likewise.
(emit_library_call_value_1): Likewise.
(store_one_arg): Use targetm.calls.function_arg_padding instead
of FUNCTION_ARG_PADDING.
(must_pass_in_stack_var_size_or_pad): Likewise.
* expr.c (emit_group_load_1): Use pad_direction instead of direction.
(emit_group_store): Likewise.
(emit_single_push_insn_1): Use targetm.calls.function_arg_padding
instead of FUNCTION_ARG_PADDING.
(emit_push_insn): Likewise, and propagate enum change throughout
function.
* function.h (direction): Delete.
(locate_and_pad_arg_data::where_pad): Use pad_direction instead
of direction.
* function.c (assign_parm_find_stack_rtl): Likewise.
(assign_parm_setup_block_p): Likewise.
(assign_parm_setup_block): Likewise.
(gimplify_parameters): Likewise.
(locate_and_pad_parm): Use targetm.calls.function_arg_padding
instead of FUNCTION_ARG_PADDING, and propagate enum change throughout
function.
* config/aarch64/aarch64.h (FUNCTION_ARG_PADDING): Delete.
(BLOCK_REG_PADDING): Use pad_direction instead of direction.
* config/aarch64/aarch64-protos.h (aarch64_pad_arg_upward): Delete.
* config/aarch64/aarch64.c (aarch64_pad_arg_upward): Replace with...
(aarch64_function_arg_padding): ...this new function.
(aarch64_gimplify_va_arg_expr): Use pad_direction instead of direction.
(TARGET_FUNCTION_ARG_PADDING): Redefine.
* config/arm/arm.h (FUNCTION_ARG_PADDING): Delete.
(BLOCK_REG_PADDING): Use pad_direction instead of direction.
* config/arm/arm-protos.h (arm_pad_arg_upward): Delete.
* config/arm/arm.c (TARGET_FUNCTION_ARG_PADDING): Redefine.
(arm_pad_arg_upward): Replace with...
(arm_function_arg_padding): ...this new function.
* config/c6x/c6x.h (BLOCK_REG_PADDING): Use pad_direction instead
of direction.
* config/ia64/hpux.h (FUNCTION_ARG_PADDING): Delete.
* config/ia64/ia64-protos.h (ia64_hpux_function_arg_padding): Delete.
* config/ia64/ia64.c (TARGET_FUNCTION_ARG_PADDING): Redefine.
(ia64_hpux_function_arg_padding): Replace with...
(ia64_function_arg_padding): ...this new function. Use pad_direction
instead of direction. Check for TARGET_HPUX.
* config/iq2000/iq2000.h (FUNCTION_ARG_PADDING): Delete.
* config/iq2000/iq2000.c (TARGET_FUNCTION_ARG_PADDING): Redefine.
(iq2000_function_arg_padding): New function.
* config/mips/mips-protos.h (mips_pad_arg_upward): Delete.
* config/mips/mips.c (mips_pad_arg_upward): Replace with...
(mips_function_arg_padding): ...this new function.
(mips_pad_reg_upward): Update accordingly.
(TARGET_FUNCTION_ARG_PADDING): Redefine.
* config/mips/mips.h (PAD_VARARGS_DOWN): Use
targetm.calls.function_arg_padding.
(FUNCTION_ARG_PADDING): Delete.
(BLOCK_REG_PADDING): Use pad_direction instead of direction.
* config/nios2/nios2.h (FUNCTION_ARG_PADDING): Delete.
(PAD_VARARGS_DOWN): Use targetm.calls.function_arg_padding.
* config/nios2/nios2-protos.h (nios2_function_arg_padding): Delete.
(nios2_block_reg_padding): Return pad_direction instead of direction.
* config/nios2/nios2.c (nios2_block_reg_padding): Return pad_direction
instead of direction.
(nios2_function_arg_padding): Likewise. Make static.
(TARGET_FUNCTION_ARG_PADDING): Redefine.
* config/pa/pa.h (FUNCTION_ARG_PADDING): Delete.
(BLOCK_REG_PADDING): Use targetm.calls.function_arg_padding.
* config/pa/pa-protos.h (pa_function_arg_padding): Delete.
* config/pa/pa.c (TARGET_FUNCTION_ARG_PADDING): Redefine.
(pa_function_arg_padding): Make static. Return pad_direction instead
of direction.
* config/powerpcspe/powerpcspe.h (FUNCTION_ARG_PADDING): Delete.
(PAD_VARARGS_DOWN): Use targetm.calls.function_arg_padding.
* config/powerpcspe/aix.h (BLOCK_REG_PADDING): Use pad_direction
instead of direction. Use targetm.calls.function_arg_padding.
* config/powerpcspe/darwin.h (BLOCK_REG_PADDING): Likewise.
* config/powerpcspe/freebsd64.h (BLOCK_REG_PADDING): Likewise.
* config/powerpcspe/linux64.h (BLOCK_REG_PADDING): Likewise.
* config/powerpcspe/powerpcspe-protos.h (function_arg_padding): Delete.
* config/powerpcspe/powerpcspe.c (TARGET_FUNCTION_ARG_PADDING):
Redefine.
(function_arg_padding): Rename to...
(rs6000_function_arg_padding): ...this. Make static. Return
pad_direction instead of direction.
(rs6000_return_in_msb): Use rs6000_function_arg_padding.
* config/rs6000/rs6000.h (FUNCTION_ARG_PADDING): Delete.
(PAD_VARARGS_DOWN): Use targetm.calls.function_arg_padding.
* config/rs6000/aix.h (BLOCK_REG_PADDING): Use pad_direction
instead of direction. Use targetm.calls.function_arg_padding.
* config/rs6000/darwin.h (BLOCK_REG_PADDING): Likewise.
* config/rs6000/freebsd64.h (BLOCK_REG_PADDING): Likewise.
* config/rs6000/linux64.h (BLOCK_REG_PADDING): Likewise.
* config/rs6000/rs6000-protos.h (function_arg_padding): Delete.
* config/rs6000/rs6000.c (TARGET_FUNCTION_ARG_PADDING): Redefine.
(function_arg_padding): Rename to...
(rs6000_function_arg_padding): ...this. Make static. Return
pad_direction instead of direction.
(rs6000_return_in_msb): Use rs6000_function_arg_padding.
* config/s390/s390.h (FUNCTION_ARG_PADDING): Delete.
* config/s390/s390.c (s390_function_arg_padding): New function.
(TARGET_FUNCTION_ARG_PADDING): Redefine.
* config/sparc/sparc.h (FUNCTION_ARG_PADDING): Delete.
* config/sparc/sparc-protos.h (function_arg_padding): Delete.
* config/sparc/sparc.c (TARGET_FUNCTION_ARG_PADDING): Redefine.
(function_arg_padding): Rename to...
(sparc_function_arg_padding): ...this. Make static. Return
pad_direction instead of direction.
* config/spu/spu.h (FUNCTION_ARG_PADDING): Delete.
* config/spu/spu.c (spu_function_arg_padding): New function.
(TARGET_FUNCTION_ARG_PADDING): Redefine.
* system.h (FUNCTION_ARG_PADDING): Poison.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251648
|
|
This patch adds a partial_subreg_p predicate to go alongside
paradoxical_subreg_p.
Like the paradoxical_subreg_p patch, this one replaces some tests that
were based on GET_MODE_SIZE rather than GET_MODE_PRECISION. In each
case the change should be a no-op or an improvement.
The regcprop.c patch prevents some replacements of the 82-bit RFmode
with the 80-bit XFmode on ia64. I don't understand the target details
here particularly well, but from the way the modes are described in
ia64-modes.def, it isn't valid to assume that an XFmode can carry an
RFmode payload. A comparison of the testsuite assembly output for one
target per CPU showed no other differences.
Some of the places changed here are tracking the widest access mode
found for a register. The series tries to standardise on:
if (partial_subreg_p (widest_seen, new_mode))
widest_seen = new_mode;
rather than:
if (paradoxical_subreg_p (new_mode, widest_seen))
widest_seen = new_mode;
Either would have been OK.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* rtl.h (partial_subreg_p): New function.
* caller-save.c (save_call_clobbered_regs): Use it.
* calls.c (expand_call): Likewise.
* combine.c (combinable_i3pat): Likewise.
(simplify_set): Likewise.
(make_extraction): Likewise.
(make_compound_operation_int): Likewise.
(gen_lowpart_or_truncate): Likewise.
(force_to_mode): Likewise.
(make_field_assignment): Likewise.
(reg_truncated_to_mode): Likewise.
(record_truncated_value): Likewise.
(move_deaths): Likewise.
* cse.c (record_jump_cond): Likewise.
(cse_insn): Likewise.
* cselib.c (cselib_lookup_1): Likewise.
* expmed.c (extract_bit_field_using_extv): Likewise.
* function.c (assign_parm_setup_reg): Likewise.
* ifcvt.c (noce_convert_multiple_sets): Likewise.
* ira-build.c (create_insn_allocnos): Likewise.
* lra-coalesce.c (merge_pseudos): Likewise.
* lra-constraints.c (match_reload): Likewise.
(simplify_operand_subreg): Likewise.
(curr_insn_transform): Likewise.
* lra-lives.c (process_bb_lives): Likewise.
* lra.c (new_insn_reg): Likewise.
(lra_substitute_pseudo): Likewise.
* regcprop.c (mode_change_ok): Likewise.
(maybe_mode_change): Likewise.
(copyprop_hardreg_forward_1): Likewise.
* reload.c (push_reload): Likewise.
(find_reloads): Likewise.
(find_reloads_subreg_address): Likewise.
* reload1.c (alter_reg): Likewise.
(eliminate_regs_1): Likewise.
* simplify-rtx.c (simplify_unary_operation_1): Likewise.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251536
|
|
This patch adds another machine_mode wrapper for modes that are
known to be COMPLEX_MODE_P. There aren't yet many places that make
use of it, but that might change in future.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* coretypes.h (complex_mode): New type.
* gdbhooks.py (build_pretty_printer): Handle it.
* machmode.h (complex_mode): New class.
(complex_mode::includes_p): New function.
(is_complex_int_mode): Likewise.
(is_complex_float_mode): Likewise.
* genmodes.c (get_mode_class): Handle complex mode classes.
* function.c (expand_function_end): Use is_complex_int_mode.
gcc/go/
* go-lang.c (go_langhook_type_for_mode): Use is_complex_float_mode.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251527
|
|
This patch adds a scalar_mode class that can hold any scalar mode,
specifically:
- scalar integers
- scalar floating-point values
- scalar fractional modes
- scalar accumulator modes
- pointer bounds modes
To start with this patch uses this type for GET_MODE_INNER.
Later patches add more uses.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* coretypes.h (scalar_mode): New class.
* machmode.h (scalar_mode): Likewise.
(scalar_mode::includes_p): New function.
(mode_to_inner): Return a scalar_mode rather than a machine_mode.
* gdbhooks.py (build_pretty_printers): Handle scalar_mode.
* genmodes.c (get_mode_class): Handle remaining scalar modes.
* cfgexpand.c (expand_debug_expr): Use scalar_mode.
* expmed.c (store_bit_field_1): Likewise.
(extract_bit_field_1): Likewise.
* expr.c (write_complex_part): Likewise.
(read_complex_part): Likewise.
(emit_move_complex_push): Likewise.
(expand_expr_real_2): Likewise.
* function.c (assign_parm_setup_reg): Likewise.
(assign_parms_unsplit_complex): Likewise.
* optabs.c (expand_binop): Likewise.
* rtlanal.c (subreg_get_info): Likewise.
* simplify-rtx.c (simplify_immed_subreg): Likewise.
* varasm.c (output_constant_pool_2): Likewise.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251515
|
|
This patch adds asserting as_a <scalar_int_mode> conversions
to contexts in which the input is known to be a scalar integer mode.
In expand_divmod, op1 is always a scalar_int_mode if
op1_is_constant (but might not be otherwise).
In expand_binop, the patch reverses a < comparison in order to
avoid splitting a long line.
gcc/
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
* cfgexpand.c (convert_debug_memory_address): Use
as_a <scalar_int_mode>.
* combine.c (expand_compound_operation): Likewise.
(make_extraction): Likewise.
(change_zero_ext): Likewise.
(simplify_comparison): Likewise.
* cse.c (cse_insn): Likewise.
* dwarf2out.c (minmax_loc_descriptor): Likewise.
(mem_loc_descriptor): Likewise.
(loc_descriptor): Likewise.
* expmed.c (init_expmed_one_mode): Likewise.
(synth_mult): Likewise.
(emit_store_flag_1): Likewise.
(expand_divmod): Likewise. Use HWI_COMPUTABLE_MODE_P instead
of a comparison with size.
* expr.c (expand_assignment): Use as_a <scalar_int_mode>.
(reduce_to_bit_field_precision): Likewise.
* function.c (expand_function_end): Likewise.
* internal-fn.c (expand_arith_overflow_result_store): Likewise.
* loop-doloop.c (doloop_modify): Likewise.
* optabs.c (expand_binop): Likewise.
(expand_unop): Likewise.
(expand_copysign_absneg): Likewise.
(prepare_cmp_insn): Likewise.
(maybe_legitimize_operand): Likewise.
* recog.c (const_scalar_int_operand): Likewise.
* rtlanal.c (get_address_mode): Likewise.
* simplify-rtx.c (simplify_unary_operation_1): Likewise.
(simplify_cond_clz_ctz): Likewise.
* tree-nested.c (get_nl_goto_field): Likewise.
* tree.c (build_vector_type_for_mode): Likewise.
* var-tracking.c (use_narrower_mode): Likewise.
gcc/c-family/
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
* c-common.c (c_common_type_for_mode): Use as_a <scalar_int_mode>.
gcc/lto/
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
* lto-lang.c (lto_type_for_mode): Use as_a <scalar_int_mode>.
From-SVN: r251487
|
|
lang_hooks.decl_printable_name.
2017-08-23 Richard Biener <rguenther@suse.de>
* function.c (fndecl_name): Use verbosity 1 (no arguments) for
lang_hooks.decl_printable_name.
* print-rtl-function.c (print_rtx_function): Likewise.
* tree-pretty-print.c (dump_function_header): Likewise.
* g++.dg/cpp1y/constexpr-instantiate.C: Adjust.
* g++.dg/tree-ssa/pr45605.C: Likewise.
* gnat.dg/noinline2.ad: Likewise.b
* gnat.dg/renaming6.ad: Likewise.b
* gnat.dg/renaming6.ad: Likewise.s
* gnat.dg/specs/noinline3.ad: Likewise.s
From-SVN: r251308
|
|
This patch simplifies the alignment calculations in pad_below.
The first arm of the "if" was:
- taking GET_MODE_BITSIZE (always equal to GET_MODE_SIZE * BITS_PER_UNIT),
- rounding up to the next multiple of PARM_BOUNDARY
- converting bits to bytes and
- subtracting the GET_MODE_SIZE
so was in effect calculating the number of bytes needed to round
GET_MODE_SIZE up to (PARM_BOUNDARY / BITS_PER_UNIT). That can be
done more directly as -size & (align - 1), which is easier to
convert to variable-sized modes.
2017-08-21 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* function.c (pad_below): Simplify padding calculation.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251233
|
|
.
2017-08-08 Martin Liska <mliska@suse.cz>
* gcc-interface/trans.c: Include header files.
2017-08-08 Martin Liska <mliska@suse.cz>
* objc-gnu-runtime-abi-01.c: Include header files.
* objc-next-runtime-abi-01.c: Likewise.
* objc-next-runtime-abi-02.c: Likewise.
2017-08-08 Martin Liska <mliska@suse.cz>
* asan.c: Include header files.
* attribs.c (build_decl_attribute_variant): New function moved
from tree.[ch].
(build_type_attribute_qual_variant): Likewise.
(cmp_attrib_identifiers): Likewise.
(simple_cst_list_equal): Likewise.
(omp_declare_simd_clauses_equal): Likewise.
(attribute_value_equal): Likewise.
(comp_type_attributes): Likewise.
(build_type_attribute_variant): Likewise.
(lookup_ident_attribute): Likewise.
(remove_attribute): Likewise.
(merge_attributes): Likewise.
(merge_type_attributes): Likewise.
(merge_decl_attributes): Likewise.
(merge_dllimport_decl_attributes): Likewise.
(handle_dll_attribute): Likewise.
(attribute_list_equal): Likewise.
(attribute_list_contained): Likewise.
* attribs.h (lookup_attribute): New function moved from tree.[ch].
(lookup_attribute_by_prefix): Likewise.
* bb-reorder.c: Include header files.
* builtins.c: Likewise.
* calls.c: Likewise.
* cfgexpand.c: Likewise.
* cgraph.c: Likewise.
* cgraphunit.c: Likewise.
* convert.c: Likewise.
* dwarf2out.c: Likewise.
* final.c: Likewise.
* fold-const.c: Likewise.
* function.c: Likewise.
* gimple-expr.c: Likewise.
* gimple-fold.c: Likewise.
* gimple-pretty-print.c: Likewise.
* gimple.c: Likewise.
* gimplify.c: Likewise.
* hsa-common.c: Likewise.
* hsa-gen.c: Likewise.
* internal-fn.c: Likewise.
* ipa-chkp.c: Likewise.
* ipa-cp.c: Likewise.
* ipa-devirt.c: Likewise.
* ipa-fnsummary.c: Likewise.
* ipa-inline.c: Likewise.
* ipa-visibility.c: Likewise.
* ipa.c: Likewise.
* lto-cgraph.c: Likewise.
* omp-expand.c: Likewise.
* omp-general.c: Likewise.
* omp-low.c: Likewise.
* omp-offload.c: Likewise.
* omp-simd-clone.c: Likewise.
* opts-global.c: Likewise.
* passes.c: Likewise.
* predict.c: Likewise.
* sancov.c: Likewise.
* sanopt.c: Likewise.
* symtab.c: Likewise.
* toplev.c: Likewise.
* trans-mem.c: Likewise.
* tree-chkp.c: Likewise.
* tree-eh.c: Likewise.
* tree-into-ssa.c: Likewise.
* tree-object-size.c: Likewise.
* tree-parloops.c: Likewise.
* tree-profile.c: Likewise.
* tree-ssa-ccp.c: Likewise.
* tree-ssa-live.c: Likewise.
* tree-ssa-loop.c: Likewise.
* tree-ssa-sccvn.c: Likewise.
* tree-ssa-structalias.c: Likewise.
* tree-ssa.c: Likewise.
* tree-streamer-in.c: Likewise.
* tree-vectorizer.c: Likewise.
* tree-vrp.c: Likewise.
* tsan.c: Likewise.
* ubsan.c: Likewise.
* varasm.c: Likewise.
* varpool.c: Likewise.
* tree.c: Remove functions moved to attribs.[ch].
* tree.h: Likewise.
* config/aarch64/aarch64.c: Add attrs.h header file.
* config/alpha/alpha.c: Likewise.
* config/arc/arc.c: Likewise.
* config/arm/arm.c: Likewise.
* config/avr/avr.c: Likewise.
* config/bfin/bfin.c: Likewise.
* config/c6x/c6x.c: Likewise.
* config/cr16/cr16.c: Likewise.
* config/cris/cris.c: Likewise.
* config/darwin.c: Likewise.
* config/epiphany/epiphany.c: Likewise.
* config/fr30/fr30.c: Likewise.
* config/frv/frv.c: Likewise.
* config/ft32/ft32.c: Likewise.
* config/h8300/h8300.c: Likewise.
* config/i386/winnt.c: Likewise.
* config/ia64/ia64.c: Likewise.
* config/iq2000/iq2000.c: Likewise.
* config/lm32/lm32.c: Likewise.
* config/m32c/m32c.c: Likewise.
* config/m32r/m32r.c: Likewise.
* config/m68k/m68k.c: Likewise.
* config/mcore/mcore.c: Likewise.
* config/microblaze/microblaze.c: Likewise.
* config/mips/mips.c: Likewise.
* config/mmix/mmix.c: Likewise.
* config/mn10300/mn10300.c: Likewise.
* config/moxie/moxie.c: Likewise.
* config/msp430/msp430.c: Likewise.
* config/nds32/nds32-isr.c: Likewise.
* config/nds32/nds32.c: Likewise.
* config/nios2/nios2.c: Likewise.
* config/nvptx/nvptx.c: Likewise.
* config/pa/pa.c: Likewise.
* config/pdp11/pdp11.c: Likewise.
* config/powerpcspe/powerpcspe.c: Likewise.
* config/riscv/riscv.c: Likewise.
* config/rl78/rl78.c: Likewise.
* config/rx/rx.c: Likewise.
* config/s390/s390.c: Likewise.
* config/sh/sh.c: Likewise.
* config/sol2.c: Likewise.
* config/sparc/sparc.c: Likewise.
* config/spu/spu.c: Likewise.
* config/stormy16/stormy16.c: Likewise.
* config/tilegx/tilegx.c: Likewise.
* config/tilepro/tilepro.c: Likewise.
* config/v850/v850.c: Likewise.
* config/vax/vax.c: Likewise.
* config/visium/visium.c: Likewise.
* config/xtensa/xtensa.c: Likewise.
2017-08-08 Martin Liska <mliska@suse.cz>
* call.c: Include header files.
* cp-gimplify.c: Likewise.
* cp-ubsan.c: Likewise.
* cvt.c: Likewise.
* init.c: Likewise.
* search.c: Likewise.
* semantics.c: Likewise.
* typeck.c: Likewise.
2017-08-08 Martin Liska <mliska@suse.cz>
* lto-lang.c: Include header files.
* lto-symtab.c: Likewise.
2017-08-08 Martin Liska <mliska@suse.cz>
* c-convert.c: Include header files.
* c-typeck.c: Likewise.
2017-08-08 Martin Liska <mliska@suse.cz>
* c-ada-spec.c: Include header files.
* c-ubsan.c: Likewise.
* c-warn.c: Likewise.
2017-08-08 Martin Liska <mliska@suse.cz>
* trans-types.c: Include header files.
From-SVN: r250946
|
|
PR middle-end/79499
* function.c (thread_prologue_and_epilogue_insns): Determine blocks
for find_many_sub_basic_blocks bitmap by looking up BLOCK_FOR_INSN
of first NONDEBUG_INSN_P in each of the split_prologue_seq and
prologue_seq sequences - if any.
* gcc.dg/pr79499.c: New test.
From-SVN: r250814
|
|
2017-07-26 Martin Liska <mliska@suse.cz>
PR sanitize/81186
* function.c (expand_function_start): Make expansion of
nonlocal_goto_save_area after parm_birth_insn.
2017-07-26 Martin Liska <mliska@suse.cz>
PR sanitize/81186
* gcc.dg/asan/pr81186.c: New test.
From-SVN: r250561
|
