| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Eric reported that the --enable-link-serialization changes seemed to
cause the binaries to be always relinked, for example from the
gcc/ directory of the build tree:
make
[relink of gnat1, brig1, cc1plus, d21, f951, go1, lto1, ...]
make
[relink of gnat1, brig1, cc1plus, d21, f951, go1, lto1, ...]
Furthermore as reported in PR, it can cause problems during make install
where make install rebuilds the binaries again.
The problem is that for make .PHONY targets are just
"rebuilt" always, so it is very much undesirable for the cc1plus$(exeext)
etc. dependencies to include .PHONY targets, but I was using
them - cc1plus.prev which would depend on some *.serial and
e.g. cc1.serial depending on c and c depending on cc1$(exeext).
The following patch rewrites this so that *.serial and *.prev aren't
.PHONY targets, but instead just make variables.
I was worried that the order in which the language makefile fragments are
included (which is quite random, what order we get from the filesystem
matching */config-lang.in) would be a problem but it seems to work fine
- as it uses make = rather than := variables, later definitions are just
fine for earlier uses as long as the uses aren't needed during the
makefile parsing, but only in the dependencies of make targets and in
their commands.
2020-11-20 Jakub Jelinek <jakub@redhat.com>
PR other/97911
gcc/
* configure.ac: In SERIAL_LIST use lang words without .serial
suffix. Change $lang.prev from a target to variable and instead
of depending on *.serial expand to the *.serial variable if
the word is in the SERIAL_LIST at all, otherwise to nothing.
* configure: Regenerated.
gcc/c/
* Make-lang.in (c.serial): Change from goal to a variable.
(.PHONY): Drop c.serial.
gcc/ada/
* gcc-interface/Make-lang.in (ada.serial): Change from goal to a
variable.
(.PHONY): Drop ada.serial and ada.prev.
(gnat1$(exeext)): Depend on $(ada.serial) rather than ada.serial.
gcc/brig/
* Make-lang.in (brig.serial): Change from goal to a variable.
(.PHONY): Drop brig.serial and brig.prev.
(brig1$(exeext)): Depend on $(brig.serial) rather than brig.serial.
gcc/cp/
* Make-lang.in (c++.serial): Change from goal to a variable.
(.PHONY): Drop c++.serial and c++.prev.
(cc1plus$(exeext)): Depend on $(c++.serial) rather than c++.serial.
gcc/d/
* Make-lang.in (d.serial): Change from goal to a variable.
(.PHONY): Drop d.serial and d.prev.
(d21$(exeext)): Depend on $(d.serial) rather than d.serial.
gcc/fortran/
* Make-lang.in (fortran.serial): Change from goal to a variable.
(.PHONY): Drop fortran.serial and fortran.prev.
(f951$(exeext)): Depend on $(fortran.serial) rather than
fortran.serial.
gcc/go/
* Make-lang.in (go.serial): Change from goal to a variable.
(.PHONY): Drop go.serial and go.prev.
(go1$(exeext)): Depend on $(go.serial) rather than go.serial.
gcc/jit/
* Make-lang.in (jit.serial): Change from goal to a
variable.
(.PHONY): Drop jit.serial and jit.prev.
($(LIBGCCJIT_FILENAME)): Depend on $(jit.serial) rather than
jit.serial.
gcc/lto/
* Make-lang.in (lto1.serial, lto2.serial): Change from goals to
variables.
(.PHONY): Drop lto1.serial, lto2.serial, lto1.prev and lto2.prev.
($(LTO_EXE)): Depend on $(lto1.serial) rather than lto1.serial.
($(LTO_DUMP_EXE)): Depend on $(lto2.serial) rather than lto2.serial.
gcc/objc/
* Make-lang.in (objc.serial): Change from goal to a variable.
(.PHONY): Drop objc.serial and objc.prev.
(cc1obj$(exeext)): Depend on $(objc.serial) rather than objc.serial.
gcc/objcp/
* Make-lang.in (obj-c++.serial): Change from goal to a variable.
(.PHONY): Drop obj-c++.serial and obj-c++.prev.
(cc1objplus$(exeext)): Depend on $(obj-c++.serial) rather than
obj-c++.serial.
|
|
When performing LTO bootstraps, especially when using tmpfs for /tmp,
one can run a machine to halt when using higher levels of parallelism
and a large number of FEs, because there are too many concurrent LTO
link commands running at the same time and each one of them puts most of the
middle-end/backend objects into /tmp.
We have --enable-link-mutex configure option, but --enable-link-mutex has
a big problem that it decreases number of available jobs by the number of
link commands waiting for the lock, so e.g. when doing make -j32 build with
11 different big programs linked with $(LLINKER) we end up with just 22
effective jobs, and with e.g. make -j8 with those 11 different big programs
we actually most likely serialize everything during linking onto a single job.
The following patch implements a new configure option,
--enable-link-serialization, which implements different serialization and
as it doesn't use the mutex, just modifying the old option to be implemented
differently would be strange. We can deprecate and later remove the old
option. The new option doesn't use any shell mutexes, but uses make
dependencies.
The option is implemented inside of gcc/ configure and Makefiles,
which means that even inside of gcc/ make all (as well as e.g. make lto-dump)
will serialize and build all previous large binaries when configured this
way.
One can always make -j32 cc1 DO_LINK_SERIALIZATION=
to avoid that.
Furthermore, I've implemented the idea I wrote about, so that
--enable-link-serialization
is the same as
--enable-link-serialization=1
and means the large link commands are serialized, one can (the default)
--disable-link-serialization
which will cause all links to be parallelizable, but one can also
--enable-link-serialization=3
etc. which says that at most 3 of the large link commands can run
concurrently.
And finally I've implemented (only if the serialization is enabled) simple
progress bars for the linking.
With --enable-link-serialization and e.g. the 5 large links I have in my
current tree (cc1, cc1plus, f951, lto1 and lto-dump), before the linking it
prints
Linking |==-- | 20%
and after it
Linking |==== | 40%
(each == characters stand for already finished links, each --
characters stand for the link being started).
With --enable-link-serialization=3 it will change the way the start is
printed, one will get:
Linking |-- | 0%
at the start of cc1 link,
Linking |>>-- | 0%
at the start of the second large link and
Linking |>>>>-- | 0%
at the start of the third large link, where the >> characters stand for
already pending links. The printing at the end of link command is
the same as with the full serialization, i.e. for the above 3:
Linking |== | 20%
Linking |==== | 40%
Linking |====== | 60%
but one could actually get them in any order depending on which of those 3
finishes first - to get it 100% accurate I'd need to add some directory with
files representing finished links or similar, doesn't seem worth it.
2020-11-18 Jakub Jelinek <jakub@redhat.com>
gcc/
* configure.ac: Add $lang.prev rules, INDEX.$lang and SERIAL_LIST and
SERIAL_COUNT variables to Make-hooks.
(--enable-link-serialization): New configure option.
* Makefile.in (DO_LINK_SERIALIZATION, LINK_PROGRESS): New variables.
* doc/install.texi (--enable-link-serialization): Document.
* configure: Regenerated.
gcc/c/
* Make-lang.in (c.serial): New goal.
(.PHONY): Add c.serial c.prev.
(cc1$(exeext)): Call LINK_PROGRESS.
gcc/cp/
* Make-lang.in (c++.serial): New goal.
(.PHONY): Add c++.serial c++.prev.
(cc1plus$(exeext)): Depend on c++.prev. Call LINK_PROGRESS.
gcc/fortran/
* Make-lang.in (fortran.serial): New goal.
(.PHONY): Add fortran.serial fortran.prev.
(f951$(exeext)): Depend on fortran.prev. Call LINK_PROGRESS.
gcc/lto/
* Make-lang.in (lto, lto1.serial, lto2.serial): New goals.
(.PHONY): Add lto lto1.serial lto1.prev lto2.serial lto2.prev.
(lto.all.cross, lto.start.encap): Remove dependencies.
($(LTO_EXE)): Depend on lto1.prev. Call LINK_PROGRESS.
($(LTO_DUMP_EXE)): Depend on lto2.prev. Call LINK_PROGRESS.
gcc/objc/
* Make-lang.in (objc.serial): New goal.
(.PHONY): Add objc.serial objc.prev.
(cc1obj$(exeext)): Depend on objc.prev. Call LINK_PROGRESS.
gcc/objcp/
* Make-lang.in (obj-c++.serial): New goal.
(.PHONY): Add obj-c++.serial obj-c++.prev.
(cc1objplus$(exeext)): Depend on obj-c++.prev. Call LINK_PROGRESS.
gcc/ada/
* gcc-interface/Make-lang.in (ada.serial): New goal.
(.PHONY): Add ada.serial ada.prev.
(gnat1$(exeext)): Depend on ada.prev. Call LINK_PROGRESS.
gcc/brig/
* Make-lang.in (brig.serial): New goal.
(.PHONY): Add brig.serial brig.prev.
(brig1$(exeext)): Depend on brig.prev. Call LINK_PROGRESS.
gcc/go/
* Make-lang.in (go.serial): New goal.
(.PHONY): Add go.serial go.prev.
(go1$(exeext)): Depend on go.prev. Call LINK_PROGRESS.
gcc/jit/
* Make-lang.in (jit.serial): New goal.
(.PHONY): Add jit.serial jit.prev.
($(LIBGCCJIT_FILENAME)): Depend on jit.prev. Call LINK_PROGRESS.
gcc/d/
* Make-lang.in (d.serial): New goal.
(.PHONY): Add d.serial d.prev.
(d21$(exeext)): Depend on d.prev. Call LINK_PROGRESS.
|
|
From-SVN: r279813
|
|
From-SVN: r267494
|
|
gcc/ChangeLog:
* Makefile.in (SELFTEST_TARGETS): New.
(selftest) Change from s-selftest-c to $(SELFTEST_TARGETS).
(C_SELFTEST_FLAGS, C_SELFTEST_DEPS, s-selftest-c, selftest-c-gdb)
(selftest-gdb, selftest-c-valgrind, selftest-valgrind): Move to
c/Make-lang.in.
(CPP_SELFTEST_FLAGS, CPP_SELFTEST_DEPS, s-selftest-c++)
(selftest-c++-gdb, selftest-c++-valgrind): Move to
cp/Make-lang.in.
* configure: Regenerate.
* configure.ac (selftest_languages): New.
gcc/brig/ChangeLog:
* Make-lang.in (selftest-brig): New.
gcc/c/ChangeLog:
* Make-lang.in (selftest-c): New.
(C_SELFTEST_FLAGS, C_SELFTEST_DEPS, s-selftest-c, selftest-c-gdb)
(selftest-gdb, selftest-c-valgrind, selftest-valgrind): Move here
from gcc/Makefile.in.
gcc/cp/ChangeLog:
* Make-lang.in (selftest-c++): New.
(CPP_SELFTEST_FLAGS, CPP_SELFTEST_DEPS, s-selftest-c++)
(selftest-c++-gdb, selftest-c++-valgrind): Move here from
gcc/Makefile.in.
gcc/fortran/ChangeLog:
* Make-lang.in (selftest-fortran): New.
gcc/go/ChangeLog:
* Make-lang.in (selftest-go): New.
gcc/jit/ChangeLog:
* Make-lang.in (selftest-jit): New.
gcc/lto/ChangeLog:
* Make-lang.in (selftest-lto): New.
gcc/objc/ChangeLog:
* Make-lang.in (selftest-objc): New.
gcc/objcp/ChangeLog:
* Make-lang.in (selftest-obj-c++): New.
From-SVN: r265240
|
|
From-SVN: r256169
|
|
From-SVN: r243994
|
|
From-SVN: r232055
|
|
gcc/
* Makefile.in (check_gcc_parallelize): Delete.
(lang_checks_parallelized): Update comment.
gcc/c
* Make-lang.in (check_gcc_pallelize): Define.
gcc/cp
* Make-lang.in (check_g++_parallelize): Update comment.
gcc/fortran
* Make-lang.in (check_gfortran_parallelize): Update comment.
From-SVN: r223597
|
|
ada/
* gcc-interface/Makefile-lan.in (ada.mostlyclean): Remove gnatbind
and gnat1.
cp/
* Make-lang.in (c++.mostlyclean): Remove xg++, g++-cross, and cc1plus.
fortran/
* Make-lang.in (fortran.mostlyclean): Remove gfortran and
gfortran-cross.
go/
* Make-lang.in (go.mostlyclean): Remove gccgo, gccgo-cross, and go1.
jit/
* Make-lang.in (jit.mostlyclean): Remove shared libraries and object
files.
objc/
* Make-lang.in (objc.mostlyclean): Remove cc1obj.
objcp/
* Make-lang.in (obj-c++.mostlyclean): Remove cc1objplus.
From-SVN: r222492
|
|
From-SVN: r219188
|
|
* configure: Regenerate.
* configure.ac (--enable-as-accelerator-for)
(--enable-offload-targets): New configure options.
gcc/
* Makefile.in (real_target_noncanonical, accel_dir_suffix)
(enable_as_accelerator): New variables substituted by configure.
(libsubdir, libexecsubdir, unlibsubdir): Tweak for the possibility of
being configured as an offload compiler.
(DRIVER_DEFINES): Pass new defines DEFAULT_REAL_TARGET_MACHINE and
ACCEL_DIR_SUFFIX.
(install-cpp, install-common, install_driver, install-gcc-ar): Do not
install for the offload compiler.
* config.in: Regenerate.
* configure: Regenerate.
* configure.ac (real_target_noncanonical, accel_dir_suffix)
(enable_as_accelerator): Compute new variables.
(ACCEL_COMPILER): Define if the compiler is built as the accel compiler.
(OFFLOAD_TARGETS): List of target names suitable for offloading.
(ENABLE_OFFLOADING): Define if list of offload targets is not empty.
gcc/cp/
* Make-lang.in (c++.install-common): Do not install for the offload
compiler.
gcc/doc/
* install.texi (Options specification): Document
--enable-as-accelerator-for and --enable-offload-targets.
gcc/fortran/
* Make-lang.in (fortran.install-common): Do not install for the offload
compiler.
libgcc/
* Makefile.in (crtoffloadbegin$(objext)): New rule.
(crtoffloadend$(objext)): Likewise.
* configure: Regenerate.
* configure.ac (accel_dir_suffix): Compute new variable.
(extra_parts): Add crtoffloadbegin.o and crtoffloadend.o
if enable_offload_targets is not empty.
* offloadstuff.c: New file.
libgomp/
* config.h.in: Regenerate.
* configure: Regenerate.
* configure.ac: Check for libdl, required for plugin support.
(PLUGIN_SUPPORT): Define if plugins are supported.
(enable_offload_targets): Support Intel MIC targets.
(OFFLOAD_TARGETS): List of target names suitable for offloading.
lto-plugin/
* Makefile.am (libexecsubdir): Tweak for the possibility of being
configured for offload compiler.
(accel_dir_suffix, real_target_noncanonical): New variables substituted
by configure.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac (accel_dir_suffix, real_target_noncanonical): Compute new
variables.
Co-Authored-By: Andrey Turetskiy <andrey.turetskiy@intel.com>
Co-Authored-By: Ilya Verbin <ilya.verbin@intel.com>
Co-Authored-By: Thomas Schwinge <thomas@codesourcery.com>
From-SVN: r217485
|
|
gcc/
* Makefile.in (dg_target_exps): Remove.
(check_gcc_parallelize): Change to just an upper bound number.
(check-%-subtargets): Always print the non-parallelized goals.
(check_p_vars, check_p_comma, check_p_subwork): Remove.
(check_p_count, check_p_numbers0, check_p_numbers1, check_p_numbers2,
check_p_numbers3, check_p_numbers4, check_p_numbers5,
check_p_numbers6): New variables.
(check_p_numbers): Set to sequence from 1 to 9999.
(check_p_subdirs): Set to sequence from 1 to minimum of
$(check_p_count) and either GCC_TEST_PARALLEL_SLOTS env var if set,
or 128.
(check-%, check-parallel-%): Rewritten so that for parallelized
testing each job runs all the *.exp files, with
GCC_RUNTEST_PARALLELIZE_DIR set in environment.
gcc/go/
* Make-lang.in (check_go_parallelize): Change to just an upper bound
number.
gcc/fortran/
* Make-lang.in (check_gfortran_parallelize): Change to just an upper
bound number.
gcc/cp/
* Make-lang.in (check_g++_parallelize): Change to just an upper bound
number.
gcc/objc/
* Make-lang.in (check_objc_parallelize): Change to just an upper
bound number.
gcc/ada/
* gcc-interface/Make-lang.in (check_acats_numbers0,
check_acats_numbers1, check_acats_numbers2, check_acats_numbers3,
check_acats_numbers4, check_acats_numbers5, check_acats_numbers6,
check_acats_numbers, check_acats_subdirs): New variables.
(check_acats_targets): Use $(check_acats_subdirs).
(check-acats, check-acats%): Rewritten so that for parallelized
testing each job runs all the chapters files, with
GCC_RUNTEST_PARALLELIZE_DIR set in environment. Prepare the support
directory sequentially and share it.
(check-acats-subtargets): Always print just check-acats.
gcc/testsuite/
* lib/gcc-defs.exp (gcc_parallel_test_run_p,
gcc_parallel_test_enable): New procedures. If
GCC_RUNTEST_PARALLELIZE_DIR is set in environment, override
runtest_file_p to invoke also gcc_parallel_test_run_p.
* g++.dg/guality/guality.exp (check_guality): Save/restore
test_counts array around the body of the procedure.
* gcc.dg/guality/guality.exp (check_guality): Likewise.
* g++.dg/plugin/plugin.exp: Run all the tests serially
by the first parallel runtest encountering it.
* gcc.dg/plugin/plugin.exp: Likewise.
* gcc.misc-tests/matrix1.exp: Likewise.
* gcc.misc-tests/dhry.exp: Likewise.
* gcc.misc-tests/acker1.exp: Likewise.
* gcc.misc-tests/linkage.exp: Likewise.
* gcc.misc-tests/mg.exp: Likewise.
* gcc.misc-tests/mg-2.exp: Likewise.
* gcc.misc-tests/sort2.exp: Likewise.
* gcc.misc-tests/sieve.exp: Likewise.
* gcc.misc-tests/options.exp: Likewise.
* gcc.misc-tests/help.exp: Likewise.
* go.test/go-test.exp (go-gc-tests): Use
gcc_parallel_test_enable {0, 1} around all handling of
each test.
* objc.dg/gnu-encoding/gnu-encoding.exp: Likewise.
* ada/acats/run_all.sh: Parallelize using mkdir inside of
a shared directory. Avoid forking and expr uses if
shell supports $(()).
libstdc++-v3/
* testsuite/Makefile.am (check_p_numbers0, check_p_numbers1,
check_p_numbers2, check_p_numbers3, check_p_numbers4,
check_p_numbers5, check_p_numbers6, check_p_numbers,
check_p_subdirs): New variables.
(check_DEJAGNU_normal_targets): Use check_p_subdirs.
(check-DEJAGNU): Rewritten so that for parallelized
testing each job runs all the *.exp files, with
GCC_RUNTEST_PARALLELIZE_DIR set in environment.
* testsuite/Makefile.in: Regenerated.
* testsuite/lib/libstdc++.exp (gcc_parallel_test_run_p,
gcc_parallel_test_enable): New procedures. If
GCC_RUNTEST_PARALLELIZE_DIR is set in environment, override
runtest_file_p to invoke also gcc_parallel_test_run_p.
* testsuite/libstdc++-abi/abi.exp: Run all the tests serially
by the first parallel runtest encountering it. Fix up path
of the extract_symvers script.
* testsuite/libstdc++-xmethods/xmethods.exp: Run all the tests
serially by the first parallel runtest encountering it. Run
dg-finish even in case of error.
From-SVN: r215273
|
|
From-SVN: r206289
|
|
* Make-lang.in (fortran_OBJS): Use fortran/gfortranspec.o.
(gfortranspec.o): Remove.
(CFLAGS-fortran/gfortranspec.o): New variable.
(GFORTRAN_D_OBJS): Update.
($(F95_PARSER_OBJS), fortran/openmp.o, GFORTRAN_TRANS_DEPS)
(fortran/f95-lang.o, fortran/scanner.o, fortran/convert.o)
(fortran/frontend-passes.o, fortran/trans.o, fortran/trans-decl.o)
(fortran/trans-types, fortran/trans-const.o, fortran/trans-expr.o)
(fortran/trans-stmt.o, fortran/trans-openmp.o, fortran/trans-io.o)
(fortran/trans-array.o, fortran/trans-intrinsic.o)
(fortran/dependency.o, fortran/trans-common.o, fortran/resolve.o)
(fortran/data.o, fortran/options.o, fortran/cpp.o)
(fortran/scanner.o, fortran/module.o): Remove.
From-SVN: r202904
|
|
-DENABLE_SHARED_LIBGCC.
* Makefile.in (DRIVER_DEFINES): Use $(and), not shell code,
to add -DENABLE_SHARED_LIBGCC.
(gcc.o): Don't use subshell.
gcc/c
* Make-lang.in (c/gccspec.o): Don't use subshell.
gcc/cp
* Make-lang.in (g++spec.o): Don't use subshell.
gcc/fortran
* Make-lang.in (gfortranspec.o): Don't use subshell.
gcc/go
* Make-lang.in (gospec.o): Don't use subshell.
gcc/java
* Make-lang.in (jvspec.o): Don't use subshell.
From-SVN: r202897
|
|
PR driver/42955
* Makefile.in: Do not install driver binaries in $(target)/bin.
* cp/Make-lang.in: Likewise.
* fortran/Make-lang.in: Likewise.
From-SVN: r202544
|
|
* Makefile.in (LLINKER): New variable.
(mostlyclean): Remove link mutex.
* configure.ac: Handle --enable-link-mutex.
* lock-and-run.sh: New script.
From-SVN: r198977
|
|
2013-04-25 Janne Blomqvist <jb@gcc.gnu.org>
PR bootstrap/57028
* Make-lang.in (f951): Link in ZLIB.
(CFLAGS-fortran/module.o): Add zlib include directory.
From-SVN: r198318
|
|
frontend ChangeLog:
2013-04-17 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/40958
* scanner.h: New file.
* Make-lang.in: Dependencies on scanner.h.
* scanner.c (gfc_directorylist): Move to scanner.h.
* module.c: Don't include md5.h, include scanner.h and zlib.h.
(MOD_VERSION): Add comment about backwards compatibility.
(module_fp): Change type to gzFile.
(ctx): Remove.
(gzopen_included_file_1): New function.
(gzopen_included_file): New function.
(gzopen_intrinsic_module): New function.
(write_char): Use gzputc.
(read_crc32_from_module_file): New function.
(read_md5_from_module_file): Remove.
(gfc_dump_module): Use gz* functions instead of stdio, check gzip
crc32 instead of md5.
(read_module_to_tmpbuf): Use gz* functions instead of stdio.
(gfc_use_module): Use gz* functions.
testsuite ChangeLog:
2013-04-17 Janne Blomqvist <jb@gcc.gnu.org>
PR fortran/40958
* lib/gcc-dg.exp (scan-module): Uncompress module file before
scanning.
* gfortran.dg/module_md5_1.f90: Remove.
From-SVN: r198023
|
|
fortran/
* Make-lang.in (F95_PARSER_OBJS): Add dependency to vec.h.
* gfortran.h: Include vec.h.
(gfc_undo_change_set): New struct.
* symbol.c (tentative_tbp): Remove struct.
(changed_syms, tentative_tbp_list): Remove variables.
(default_undo_chgset_var, latest_undo_chgset): New variables.
(save_symbol_data, gfc_get_sym_tree, gfc_undo_symbols,
gfc_commit_symbols, gfc_commit_symbol,
gfc_enforce_clean_symbol_state, gfc_get_typebound_proc):
Use latest_undo_chgset instead of changed_syms and tentative_tbp_list.
From-SVN: r196411
|
|
From-SVN: r195098
|
|
/usr/include))
gcc/
2012-10-21 Tobias Burnus <burnus@net-b.de>
PR fortran/54725
* Makefile.in (TARGET_SYSTEM_ROOT_DEFINE): New.
gcc/fortran
2012-10-21 Tobias Burnus <burnus@net-b.de>
PR fortran/54725
* Make-lang.in (CFLAGS-cpp.o): Use TARGET_SYSTEM_ROOT_DEFINE.
* cpp.o (gfc_cpp_init_options): Use it for
setting gfc_cpp_option.sysroot.
From-SVN: r192650
|
|
gcc/
* system.h (dump_file): Do not define.
* tree-pass.h: Include dumpfile.h, which is a new file containing...
(enum tree_dump_index, TDF_*, get_dump_file_name, dump_enabled_p,
dump_initialized_p, dump_begin, dump_end, dump_node, dump_switch_p,
dump_flag_name, dump_file, dump_flags, dump_file_name,
get_dump_file_info, struct dump_file_info): all of this, moved to...
* dumpfile.h: Here, new file.
* tree-dump.h: Include dumpfile.h, but not tree-pass.h.
(dump_stmt): Remove prototype for C++ specific function.
(dump_enumerated_decls): Move prototype from here...
* tree-flow.h (dump_enumerated_decls): ... to here.
(get_ref_base_and_extent) Move prototype from here ...
* tree.h (get_ref_base_and_extent) ... to here.
* tree-ssa-live.c: Do not inclde tree-pretty-print.h, because
gimple-pretty-print.h is enough. Do not include tree-dump.h,
include timevar.h and dumpfile.h instead.
(struct numbered_tree_d, compare_decls_by_uid,
dump_enumerated_decls_push, dump_enumerated_decls): Move from here ...
* tree-dfa.c:(struct numbered_tree_d, compare_decls_by_uid,
dump_enumerated_decls_push, dump_enumerated_decls):... to here.
Do not include timevar.h.
* tree.c: Do not include timevar.h.
* tree-cfg.c: Do not include langhooks.h, tree-pretty-print.h, and
timevar.h.
(dump_cfg_stats): Use current_function_name.
(gimple_cfg2vcg): Likewise.
(dump_function_to_file): Likewise.
* df-scan.c: Do not include tree-pass.h and timevar.h.
Include dumpfile.h.
(df_entry_block_bitmap_verify, df_exit_block_bitmap_verify): Do not
use print_current_pass.
* df-problems.c: Include dumpfile.h.
Always define REG_DEAD_DEBUGGING, avoid #ifdef code, because it
leads to errors in the code not selected.
(df_note_compute): Do not print_rtl_with_bb here. Fix compilation
bug if REG_DEAD_DEBUGGING is not 0, get_insns is not available here.
* lcm.c: Include dumpfile.h.
Remove obsolete include of insn-attr.h.
* dojump.c (do_compare_rtx_and_jump): Remove failure printing for
missing probability notes.
* stmt.c: Include dumpfile.h.
(emit_case_decision_tree): Re-enable printing expand details only
if TDF_DETAILS.
* alias.c, auto-inc-dec.c, bb-reorder.c, caller-save.c, cfg.c,
cfgcleanup.c, cfgexpand.c, cfgloop.c, cfgloopmanip.c, cgraph.c,
cgraphclones.c, cgraphunit.c, combine.c, combine-stack-adj.c,
coverage.c, cprop.c, cse.c, cselib.c, dbgcnt.c, dce.c, df-core.c,
dse.c, dwarf2out.c, emit-rtl.c, except.c, expr.c, final.c,
function.c, fwprop.c, gcse.c, gimple-fold.c,
gimple-pretty-print.c, gimple-ssa-strength-reduction.c,
gimplify.c, graphite-blocking.c, graphite-clast-to-gimple.c,
graphite-dependences.c, graphite-interchange.c,
graphite-optimize-isl.c, graphite-poly.c,
graphite-sese-to-poly.c, haifa-sched.c, hw-doloop.c, ifcvt.c,
ipa.c, ipa-cp.c, ipa-inline-analysis.c, ipa-inline.c,
ipa-inline-transform.c, ipa-prop.c, ipa-pure-const.c,
ipa-reference.c, ipa-split.c, ipa-utils.c, ira.c, ira-emit.c,
jump.c, loop-doloop.c, loop-init.c, loop-invariant.c, loop-iv.c,
loop-unroll.c, loop-unswitch.c, lower-subreg.c,
lto-section-out.c, lto-streamer-in.c, matrix-reorg.c, mcf.c,
mode-switching.c, modulo-sched.c, omega.c, omp-low.c, passes.c,
plugin.c, postreload.c, postreload-gcse.c, predict.c, print-rtl.c,
print-tree.c, profile.c, recog.c, ree.c, regcprop.c, reginfo.c,
regmove.c, regrename.c, reg-stack.c, reload1.c, reorg.c,
sched-rgn.c, sched-vis.c, sel-sched.c, sel-sched-ir.c,
store-motion.c, tracer.c, trans-mem.c, tree-affine.c,
tree-call-cdce.c, tree-cfgcleanup.c, tree-chrec.c,
tree-data-ref.c, tree-diagnostic.c, tree-dump.c,
tree-eh.c, tree-flow-inline.h, tree-if-conv.c, tree-into-ssa.c,
tree-mudflap.c, tree-nrv.c, tree-object-size.c,
tree-optimize.c, tree-outof-ssa.c, tree-predcom.c,
tree-pretty-print.c, tree-profile.c, tree-scalar-evolution.c,
tree-sra.c, tree-ssa-address.c, tree-ssa-alias.c, tree-ssa.c,
tree-ssa-ccp.c, tree-ssa-coalesce.c, tree-ssa-copy.c,
tree-ssa-copyrename.c,, tree-ssa-dce.c, tree-ssa-dom.c,
tree-ssa-dse.c, tree-ssa-forwprop.c, tree-ssa-ifcombine.c,
tree-ssa-loop.c, tree-ssa-loop-ch.c, tree-ssa-loop-im.c,
tree-ssa-loop-ivcanon.c, tree-ssa-loop-ivopts.c,
tree-ssa-loop-manip.c, tree-ssa-loop-niter.c,
tree-ssa-loop-prefetch.c, tree-ssa-loop-unswitch.c,
tree-ssa-math-opts.c, tree-ssa-operands.c, tree-ssa-phiopt.c,
tree-ssa-phiprop.c, tree-ssa-pre.c, tree-ssa-propagate.c,
tree-ssa-reassoc.c, tree-ssa-sccvn.c, tree-ssa-sink.c,
tree-ssa-structalias.c, tree-ssa-tail-merge.c, tree-ssa-ter.c,
tree-ssa-threadedge.c, tree-ssa-threadupdate.c,
tree-ssa-uncprop.c, tree-ssa-uninit.c,
tree-switch-conversion.c, tree-tailcall.c,
tree-vect-data-refs.c, tree-vect-loop.c,
tree-vect-loop-manip.c, tree-vectorizer.c,
tree-vect-patterns.c, tree-vect-slp.c, tree-vect-stmts.c,
tree-vrp.c, value-prof.c, var-tracking.c, web.c: Include tree-pass.h
only if needed. If tree-pass.h is included, do not include timevar.h
and dumpfile.h. If tree-pass.h is not included but dump_file, or
dump_flags, or the TDF_* flags are used, include dumpfile.h.
If gimple-pretty-print.h is included, don't include tree-pretty-print.h.
Remove assorted unnecessary includes.
* config/mn10300/mn10300.c, config/c6x/c6x.c, config/ia64/ia64.c,
config/arm/arm.c, config/bfin/bfin.c, config/frv/frv.c,
config/spu/spu.c, config/mep/mep.c, config/i386/i386.c:
Include dumpfile.h.
* config/rl78/rl78.c: Include dumpfile.h instead of tree-pass.h.
* arm/t-arm, avr/t-avr, i386/t-i386, ia64/t-ia64, mep/t-mep,
spu/t-spu-elf: Fix dependencies.
c-family/
* c-gimplify.c: Include dumpfile.h instead of tree-dump.h.
* c-ada-spec.c: Likewise.
* c-dump.c (dump_stmt): Move to cp/dump.c, the only user.
c/
* c-decl.c: Include dumpfile.h instead of tree-dump.h.
* Make-lang.in: Fix dependencies.
cp/
* dump.c (dump_stmt): Moved here from c-dump.c.
* optimize.c: Include dumpfile.h instead of tree-dump.h.
* class.c: Likewise.
* decl2.c: Likewise.
* Make-lang.in: Fix dependencies.
fortran/
* f95-lang.c: Include dumpfile.h instead of tree-dump.h.
* Make-lang.in: Fix dependencies.
java/
* java-gimplify.c Include dumpfile.h instead of tree-dump.h
* Make-lang.in: Fix dependencies.
lto/
* lto.c: Do not include timevar.h.
* Make-lang.in: Fix dependencies.
ada/
* gcc-interface/utils.c: Include timevar.h.
* Make-lang.in: Fix dependencies.
From-SVN: r189519
|
|
* output.h (__gcc_host_wide_int__): Move to hwint.h.
(decl_default_tls_model): Move to tree.h
(dump_file): Move to system.h.
(default_stabs_asm_out_destructor, default_stabs_asm_out_constructor,
dbxout_int, dbxout_stabd, dbxout_begin_stabn, dbxout_begin_stabn_sline,
dbxout_begin_empty_stabs, dbxout_begin_simple_stabs,
dbxout_begin_simple_stabs_desc, dbxout_stab_value_zero,
dbxout_stab_value_zero, dbxout_stab_value_label_diff,
dbxout_stab_value_internal_label,
dbxout_stab_value_internal_label_diff): Move from here ...
* dbxout.h: ... to here.
* system.h (dump_file): Moved here from output.h.
* hwint.h (__gcc_host_wide_int__): Moved here from output.h.
* tree.h (decl_default_tls_model): Moved here from output.h.
* varasm.c (default_stabs_asm_out_destructor,
default_stabs_asm_out_constructor): Move from here ...
* dbxout.c: ... to here.
* gcov-dump.c (dump_file): Rename to dump_gcov_file. Update callers.
* collect2.h (dump_file): Rename to dump_ld_file.
* collect2.c: Likewise.
* tlink.c: Likewise.
* alias.c: Do not include output.h.
* auto-inc-dec.c: Likewise.
* bt-load.c: Likewise.
* caller-save.c: Likewise.
* cfg.c: Likewise.
* cfgbuild.c: Likewise.
* cfgcleanup.c: Likewise.
* cfglayout.c: Likewise.
* cfgloop.c: Likewise.
* cfgloopanal.c: Likewise.
* cfgloopmanip.c: Likewise.
* cfgrtl.c: Likewise.
* cgraph.c: Likewise.
* cgraphclones.c: Likewise.
* combine-stack-adj.c: Likewise.
* combine.c: Likewise.
* cprop.c: Likewise.
* cse.c: Likewise.
* cselib.c: Likewise.
* dbgcnt.c: Likewise.
* df-problems.c: Likewise.
* df-scan.c: Likewise.
* dojump.c: Likewise.
* fwprop.c: Likewise.
* gcse.c: Likewise.
* graph.c: Likewise.
* haifa-sched.c: Likewise.
* hw-doloop.c: Likewise.
* ipa-inline-transform.c: Likewise.
* ipa-pure-const.c: Likewise.
* ipa-reference.c: Likewise.
* ipa-utils.c: Likewise.
* ira-build.c: Likewise.
* ira-emit.c: Likewise.
* lcm.c: Likewise.
* loop-doloop.c: Likewise.
* loop-invariant.c: Likewise.
* loop-iv.c: Likewise.
* loop-unroll.c: Likewise.
* loop-unswitch.c: Likewise.
* lto-cgraph.c: Likewise.
* lto-section-in.c: Likewise.
* lto-streamer-in.c: Likewise.
* mcf.c: Likewise.
* mode-switching.c: Likewise.
* postreload-gcse.c: Likewise.
* postreload.c: Likewise.
* predict.c: Likewise.
* profile.c: Likewise.
* ree.c: Likewise.
* reg-stack.c: Likewise.
* regcprop.c: Likewise.
* regmove.c: Likewise.
* regstat.c: Likewise.
* reload1.c: Likewise.
* sched-ebb.c: Likewise.
* sel-sched-dump.c: Likewise.
* simplify-rtx.c: Likewise.
* stor-layout.c: Likewise.
* store-motion.c: Likewise.
* tracer.c: Likewise.
* tree-affine.c: Likewise.
* tree-cfg.c: Likewise.
* tree-cfgcleanup.c: Likewise.
* tree-dfa.c: Likewise.
* tree-into-ssa.c: Likewise.
* tree-nomudflap.c: Likewise.
* tree-optimize.c: Likewise.
* tree-pretty-print.c: Likewise.
* tree-profile.c: Likewise.
* tree-ssa-address.c: Likewise.
* tree-ssa-ccp.c: Likewise.
* tree-ssa-copy.c: Likewise.
* tree-ssa-dom.c: Likewise.
* tree-ssa-loop-ch.c: Likewise.
* tree-ssa-loop-im.c: Likewise.
* tree-ssa-loop-manip.c: Likewise.
* tree-ssa-loop-niter.c: Likewise.
* tree-ssa-loop-prefetch.c: Likewise.
* tree-ssa-loop-unswitch.c: Likewise.
* tree-ssa-loop.c: Likewise.
* tree-ssa-propagate.c: Likewise.
* tree-ssa-structalias.c: Likewise.
* tree-ssa-tail-merge.c: Likewise.
* tree-ssa-threadedge.c: Likewise.
* tree-ssa-threadupdate.c: Likewise.
* tree-ssa-uncprop.c: Likewise.
* tree-ssa-uninit.c: Likewise.
* tree-ssa.c: Likewise.
* value-prof.c: Likewise.
* var-tracking.c: Likewise.
* web.c: Likewise.
* config/m32r/m32r.c: Include dbxout.h.
* config/pa/pa.c: Likewise.
* config/rs6000/rs6000.c: Likewise.
* Makefile.in: Fix dependencies.
* config/rs6000/t-rs5000: Likewise.
c-family/
* c-ada-spec.c: Do not include output.h.
* c-semantics.c: Likewise.
cp/
* call.c: Do not include output.h.
* class.c: Likewise.
* except.c: Likewise.
* friend.c: Likewise.
* init.c: Likewise.
* lex.c: Likewise.
* method.c: Likewise.
* parser.c: Likewise.
* pt.c: Likewise.
* rtti.c: Likewise.
* search.c: Likewise.
objc/
* objc-act.c: Do not include output.h.
fortran/
* trans-common.c: Do not include output.h.
* trans-decl.c: Likewise.
java/
* resource.c: Do not include output.h.
From-SVN: r188082
|
|
* Make-lang.in (convert.o): Depend on convert.h.
* convert.c: Header and comment cleanups.
(gfc_thruthvalue_conversion): Rename static function
to truthvalue_conversion. Do not use 'internal_error' from here,
use 'gcc_unreachable' instead.
(convert): Do not use 'error' for conversions to void, use
'gcc_unreachable' instead. Likewise for conversions to non-scalar
types. Do not hanlde ENUMERAL_TYPE, the front end never creates them.
Clean up #if 0 code.
From-SVN: r185160
|
|
gcc:
PR translation/45116
* Makefile.in (slibdir): Remove, don't export.
(SHLIB_NM_FLAGS): Remove.
(libgcc.mvars): Don't emit SHLIB_LINK, SHLIB_INSTALL,
SHLIB_DLLDIR, SHLIB_EXT, SHLIB_MKMAP, SHLIB_MKMAP_OPTS,
SHLIB_MAPFILES, SHLIB_NM_FLAGS.
(DRIVER_DEFINES): Test SHLIB instead of SHLIB_LINK.
(gcc.o): Pass SHLIB instead of SHLIB_LINK.
(gccspec.o): Likewise.
(installdirs): Don't create $(DESTDIR)$(slibdir).
* configure.ac (slibdir): Remove.
* configure: Regenerate.
* libgcc-libsystem.ver: Move to ../libgcc/config.
* mkmap-flat.awk, mkmap-symver.awk: Move to ../libgcc.
* config/libgcc-glibc.ver: Move to ../libgcc/config.
* config/t-libunwind (SHLIB_LC): Remove.
* config/t-linux (SHLIB_MAPFILES): Remove.
* config/t-slibgcc-dummy: Rename to config/t-slibgcc.
* config/t-slibgcc-elf-ver: Remove.
* config/t-slibgcc-libgcc, config/t-slibgcc-nolc-override: Move to
../libgcc/config.
* config/alpha/libgcc-alpha-ldbl.ver, config/alpha/t-linux: Move
to ../libgcc/config/alpha.
* config/alpha/t-vms (shlib_version, SHLIB_EXT, SHLIB_OBJS,
SHLIB_NAME, SHLIB_MULTILIB, SHLIB_INSTALL, SHLIB_SYMVEC,
SHLIB_SYMVECX2, SHLIB_LINK): Remove.
* config/arm/libgcc-bpabi.ver: Move to ../libgcc/config/arm.
* config/arm/t-bpabi (SHLIB_MAPFILES): Remove.
* config/arm/t-netbsd (SHLIB_EXT, SHLIB_NAME, SHLIB_SONAME,
SHLIB_OBJS, SHLIB_LINK, SHLIB_INSTALL): Remove.
* config/arm/t-symbian (SHLIB_LC): Remove.
* config/bfin/libgcc-bfin.ver: Move to
../libgcc/config/bfin/libgcc-glibc.ver.
* config/bfin/t-bfin-linux (SHLIB_MAPFILES): Remove.
* config/c6x/libgcc-c6xeabi.ver: Move to
../libgcc/config/c6x/libgcc-eabi.ver.
* config/c6x/t-c6x-elf (SHLIB_MAPFILES): Remove.
* config/cris/libgcc.ver: Move to
../libgcc/config/cris/libgcc-glibc.ver.
* config/cris/t-linux (SHLIB_MAPFILES): Remove.
* config/frv/libgcc-frv.ver: Move to ../libgcc/config/frv.
* config/frv/t-linux (SHLIB_MAPFILES): Remove.
* config/i386/darwin-libgcc.10.4.ver: Move to
../libgcc/config/i386/libgcc-darwin.10.4.ver.
* config/i386/darwin-libgcc.10.5.ver: Move to
../libgcc/config/i386/libgcc-darwin.10.5.ver.
* config/i386/libgcc-glibc.ver: Move to ../libgcc/config/i386.
* config/i386/t-cygming (SHLIB_EXT, SHLIB_IMPLIB, SHLIB_SOVERSION,
SHLIB_SONAME, SHLIB_MAP, SHLIB_OBJS, SHLIB_DIR, SHLIB_SLIBDIR_QUAL)
SHLIB_PTHREAD_CFLAG, SHLIB_PTHREAD_LDFLAG, SHLIB_LINK,
SHLIB_INSTALL, SHLIB_MKMAP, SHLIB_MKMAP_OPTS, SHLIB_MAPFILES):
Remove.
* config/i386/t-cygwin (SHLIB_LC, SHLIB_EH_EXTENSION,
SHLIB_IMPLIB, SHLIB_SONAME, SHLIB_MKMAP_OPTS): Remove.
* config/i386/t-dlldir, config/i386/t-dlldir-x: Move to
../libgcc/config/i386.
* config/i386/t-dw2-eh, config/i386/t-sjlj-eh: Move to
../libgcc/config/i386.
* config/i386/t-linux: Move to ../libgcc/config/i386.
* config/i386/t-mingw-pthread: Move to ../libgcc/config/i386.
* config/i386/t-mingw-w32 (SHLIB_LC): Remove.
* config/i386/t-mingw-w64: Likewise.
* config/i386/t-mingw32: Remove.
* config/ia64/libgcc-glibc.ver, config/ia64/libgcc-ia64.ver: Move
to ../libgcc/config/ia64.
* config/ia64/t-glibc: Remove.
* config/ia64/t-hpux (SHLIB_EXT, SHLIB_LINK, SHLIB_INSTALL): Remove.
* config/ia64/t-ia64 (SHLIB_MAPFILES): Remove.
* config/ia64/t-vms (shlib_version, SHLIB_EXT, SHLIB_OBJS,
SHLIB_NAME, SHLIB_MULTILIB, SHLIB_INSTALL, SHLIB_LINK): Remove.
* config/ia64/vms_symvec_libgcc_s.opt: Remove.
* config/m32r/libgcc-glibc.ver: Move to ../libgcc/config/m32r.
* config/m32r/t-linux (SHLIB_MAPFILES): Remove.
* config/m68k/t-slibgcc-elf-ver: Move to ../libgcc/config/m68k.
* config/mips/t-libgcc-mips16 (SHLIB_MAPFILES): Remove.
* config/pa/t-hpux-shlib: Move to ../libgcc/config/pa/t-slibgcc-hpux.
* config/pa/t-slibgcc-dwarf-ver, config/pa/t-slibgcc-sjsj-ver:
Move to ../libgcc/config/pa.
* config/rs6000/darwin-libgcc.10.4.ver: Move to
../libgcc/config/rs6000/libgcc-darwin.10.4.ver.
* config/rs6000/darwin-libgcc.10.5.ver: Move to
../libgcc/config/rs6000/libgcc-darwin.10.5.ver.
* config/rs6000/t-aix43 (SHLIB_EXT, SHLIB_LINK, SHLIB_INSTALL,
SHLIB_LIBS, SHLIB_MKMAP, SHLIB_NM_FLAGS, AR_FLAGS_FOR_TARGET): Remove.
* config/rs6000/t-aix52: Likewise.
* config/sh/libgcc-excl.ver, config/sh/libgcc-glibc.ver: Move to
../libgcc/config/sh.
* config/sparc/libgcc-sparc-glibc.ver: Move to
../libgcc/config/sparc/libgcc-glibc.ver.
* config/sparc/t-linux: Move to ../libgcc/config/sparc.
* config/xtensa/t-linux (SHLIB_MAPFILES): Remove.
* config/xtensa/libgcc-xtensa.ver: Move to
../libgcc/config/xtensa/libgcc-glibc.ver.
* config.gcc (*-*-freebsd*): Replace t-slibgcc-elf-ver with
t-slibgcc in tmake_file.
Remove t-slibgcc-nolc-override for *-*-freebsd[34],
*-*-freebsd[34].* with pthreads.
(*-*-linux*, frv-*-*linux*, *-*-kfreebsd*-gnu,
*-*-knetbsd*-gnu, *-*-gnu*, *-*-kopensolaris*-gnu): Replace
t-slibgcc-elf-ver with t-slibgcc in tmake_file.
(*-*-netbsd*): Likewise.
(*-*-solaris2*): Replace t-slibgcc-dummy with t-slibgcc in tmake_file.
(*-*-*vms*): Add t-slibgcc to tmake_file.
(alpha*-*-linux*): Remove alpha/t-linux from tmake_file.
(alpha*-dec-osf5.1*): Replace t-slibgcc-dummy with t-slibgcc in
tmake_file.
(arm*-*-linux*): Remove t-slibgcc-libgcc from tmake_file for
arm*-*-linux-*eabi.
(bfin*-linux-uclibc*): Replace t-slibgcc-dummy with t-slibgcc in
tmake_file.
(crisv32-*-linux*, cris-*-linux*): Likewise.
(hppa*-*-linux*): Remove t-slibgcc-libgcc, pa/t-slibgcc-sjlj-ver,
pa/t-slibgcc-dwarf-ver from tmake_file.
(hppa[12]*-*-hpux10*): Replace pa/t-hpux-shlib with t-slibgcc in
tmake_file.
Remove pa/t-slibgcc-sjlj-ver, pa/t-slibgcc-dwarf-ver from tmake_file.
(hppa*64*-*-hpux11*): Likewise.
(hppa[12]*-*-hpux11*): Likewise.
(i[34567]86-*-darwin*): Replace t-slibgcc-dummy in t-slibgcc in
tmake_file.
(x86_64-*-darwin*): Likewise.
(i[34567]86-*-cygwin*): Remove tmake_eh_file, tmake_dlldir_file.
Add t-slibgcc to tmake_file.
(i[34567]86-*-mingw*, x86_64-*-mingw*): Likewise.
Remove i386/t-mingw32 from tmake_file unless x86_64-w64-*,
i[34567]86-w64-*.
Remove i386/t-mingw-pthread from tmake_file.
(ia64*-*-linux*): Remove ia64/t-glibc from tmake_file.
(ia64*-*-hpux*): Add t-slibgcc to tmake_file.
(ia64-hp-*vms*): Likewise.
(m32r-*-linux*): Replace t-slibgcc-elf-ver with t-slibgcc in
tmake_file.
(m32rle-*-linux*): Likewise.
(m68k-*-linux*): Remove m68k/t-slibgcc-elf-ver from tmake_file.
(microblaze*-linux*): Remove t-slibgcc-elf-ver,
t-slibgcc-nolc-override from tmake_file.
(mips-sgi-irix6.5*): Replace t-slibgcc-dummy with t-slibgcc in
tmake_file.
(powerpc-*-darwin*): Likewise.
(powerpc64-*-darwin*): Likewise.
(powerpc-*-freebsd*): Remove t-slibgcc-libgcc from tmake_file.
(powerpc-*-linux*, powerpc64-*-linux*): Likewise.
(rs6000-ibm-aix4.[3456789]*, powerpc-ibm-aix4.[3456789]*): Add
t-slibgcc to tmake_file.
(rs6000-ibm-aix5.1.*, powerpc-ibm-aix5.1.*): Likewise.
(rs6000-ibm-aix5.2.*, powerpc-ibm-aix5.2.*): Likewise.
(rs6000-ibm-aix5.3.*, powerpc-ibm-aix5.3.*): Likewise.
(rs6000-ibm-aix[6789].*, powerpc-ibm-aix[6789].*): Likewise.
(sparc-*-linux*): Remove sparc/t-linux from tmake_file.
(sparc64-*-linux*): Likewise.
(tic6x-*-uclinux): Replace t-slibgcc-elf-ver with t-slibgcc in
tmake_file.
(i[34567]86-*-linux*, x86_64-*-linux*, i[34567]86-*-kfreebsd*-gnu,
x86_64-*-kfreebsd*-gnu, i[34567]86-*-gnu*): Remove i386/t-linux
from tmake_file.
gcc/cp:
* Make-lang.in (g++spec.o): Pass SHLIB instead of SHLIB_LINK.
gcc/fortran:
* Makef-lang.in (gfortranspec.o): Pass SHLIB instead of SHLIB_LINK.
gcc/go:
* Make-lang.in (gospec.o): Pass SHLIB instead of SHLIB_LINK.
gcc/java:
* Make-lang.in (jvspec.o): Pass SHLIB instead of SHLIB_LINK.
libgcc:
* Makefile.in (SHLIB_NM_FLAGS): Set.
* mkmap-flat.awk, mkmap-symver.awk: New files.
* configure.ac (libgcc_cv_lib_sjlj_exceptions): Check for SjLj
exceptions.
* configure: Regenerate.
* config/libgcc-glibc.ver: New file.
* config/libgcc-libsystem.ver: New file.
* config/t-libunwind (SHLIB_LC): Set.
* config/t-linux: New file.
* config/t-slibgcc (INSTALL_SHLIB): New.
(SHLIB_INSTALL): Use it.
* config/t-slibgcc-darwin (SHLIB_MKMAP): Use $(srcdir) to refer
to mkmap-symver.awk.
(SHLIB_MAPFILES): Don't append, adapt pathname.
(SHLIB_VERPFX): Set.
* config/t-slibgcc-elf-ver (SHLIB_MKMAP): Use $(srcdir) to refer
to mkmap-symver.awk.
* config/t-slibgcc-gld-nover, config/t-slibgcc-hpux,
config/t-slibgcc-libgcc, config/t-slibgcc-vms: New files.
* config/alpha/libgcc-alpha-ldbl.ver, config/alpha/t-linux: New files.
* config/alpha/t-slibgcc-osf (SHLIB_MKMAP): Use $(srcdir) to refer
to mkmap-flat.awk.
* config/arm/t-bpabi (SHLIB_MAPFILES): Set.
* config/bfin/libgcc-glibc.ver, config/bfin/t-linux: New files.
* config/c6x/libgcc-eabi.ver, config/c6x/t-elf: New files.
* config/cris/libgcc-glibc.ver, config/cris/t-linux: New files.
* config/frv/libgcc-frv.ver, config/frv/t-linux: New files.
* config/i386/libgcc-darwin.10.4.ver,
config/i386/libgcc-darwin.10.5.ver, config/i386/libgcc-glibc.ver:
New files.
* config/i386/t-darwin: Remove.
* config/i386/t-darwin64: Likewise.
* config/i386/t-dw2-eh, config/i386/t-sjlj-eh: New files.
* config/i386/t-slibgcc-cygming, config/i386/t-cygwin,
config/i386/t-dlldir, config/i386/t-dlldir-x: New files.
* config/i386/t-linux: New file.
* config/i386/t-mingw32: New file.
* config/ia64/libgcc-glibc.ver, config/ia64/libgcc-ia64.ver: New files.
* config/ia64/t-glibc: Rename to ...
* config/ia64/t-linux: ... this.
(SHLIB_MAPFILES): Set.
* config/ia64/t-glibc-libunwind: Rename to ...
* config/ia64/t-linux-libunwind: ... this.
* config/ia64/t-ia64 (SHLIB_MAPFILES): Set.
* config/ia64/t-slibgcc-hpux: New file.
* config/m32r/libgcc-glibc.ver, config/m32r/t-linux: New files.
* config/m68k/t-slibgcc-elf-ver: New file.
* config/mips/t-mips16 (SHLIB_MAPFILES): Set.
* config/mips/t-slibgcc-irix (SHLIB_MKMAP): Use $(srcdir) to refer
to mkmap-flat.awk.
* config/pa/t-slibgcc-hpux: New file.
* config/pa/t-slibgcc-dwarf-ver, config/pa/t-slibgcc-sjsj-ver: New
files.
* config/rs6000/libgcc-darwin.10.4.ver,
config/rs6000/libgcc-darwin.10.5.ver: New files.
* config/rs6000/libgcc-ppc-glibc.ver: Rename to
config/rs6000/libgcc-glibc.ver.
* config/rs6000/libgcc-ppc64.ver: Rename to
config/rs6000/libgcc-ibm-ldouble.ver.
* config/rs6000/t-darwin (SHLIB_VERPFX): Remove.
* config/rs6000/t-ibm-ldouble (SHLIB_MAPFILES): Adapt filename.
* config/rs6000/t-ldbl128: Rename to ...
* config/rs6000/t-linux: ... this.
(SHLIB_MAPFILES): Adapt filename.
* config/rs6000/t-slibgcc-aix: New file.
* config/sh/libgcc-excl.ver, config/sh/libgcc-glibc.ver: New files.
* config/sh/t-linux (SHLIB_MAPFILES): Use $(srcdir) to refer to
libgcc-excl.ver, libgcc-glibc.ver.
(SHLIB_LINK, SHLIB_INSTALL): Remove.
* config/sparc/libgcc-glibc.ver: New file.
* config/sparc/t-linux: New file.
* config/xtensa/libgcc-glibc.ver, config/xtensa/t-linux: New files.
* config.host (*-*-freebsd*): Add t-slibgcc, t-slibgcc-gld,
t-slibgcc-elf-ver to tmake_file.
Add t-slibgcc-nolc-override to tmake_file for posix threads on
*-*-freebsd[34].
(*-*-linux*, frv-*-*linux*, *-*-kfreebsd*-gnu, *-*-knetbsd*-gnu,
*-*-gnu*, *-*-kopensolaris*-gnu): Add t-slibgcc, t-slibgcc-gld,
t-slibgcc-elf-ver, t-linux to tmake_file.
(*-*-netbsd*): Add t-slibgcc, t-slibgcc-gld, t-slibgcc-elf-ver to
tmake_file.
(alpha*-*-linux*): Add alpha/t-linux to tmake_file.
(alpha64-dec-*vms*): Add t-slibgcc-vms to tmake_file.
(alpha*-dec-*vms*): Likewise.
(arm*-*-freebsd*): Append to tmake_file.
(arm*-*-netbsdelf*): Add t-slibgcc-gld-nover to tmake_file.
(arm*-*-linux*): Add t-slibgcc-libgcc to tmake_file for
arm*-*-linux-*eabi.
(arm*-*-eabi*, arm*-*-symbianelf*): Add t-slibgcc-nolc-override to
tmake_file for arm*-*-symbianelf*.
(bfin*-linux-uclibc*): Append to tmake_file, add bfin/t-linux.
(cris-*-linux*, crisv32-*-linux*): Append to tmake_file, add
cris/t-linux.
(frv-*-*linux*): Append to tmake_file, add frv/t-linux.
(hppa*-*-linux*): Add t-slibgcc-libgcc, pa/t-slibgcc-sjlj-ver,
pa/t-slibgcc-dwarf-ver to tmake_file.
(hppa[12]*-*-hpux10*): Add t-slibgcc, pa/t-slibgcc-sjlj-ver,
pa/t-slibgcc-dwarf-ver, t-slibgcc-hpux, pa/t-slibgcc-hpux to tmake_file.
(hppa*64*-*-hpux11*): Likewise.
(hppa[12]*-*-hpux11*): Likewise.
(x86_64-*-darwin*): Don't override tmake_file, but only keep
i386/t-crtpc, i386/t-crtfm.
(i[34567]86-*-cygwin*): Set tmake_eh_file, tmake_dlldir_file.
Prepend $tmake_eh_file, $tmake_dlldir_file, i386/t-slibgcc-cygming
to tmake_file.
Add i386/t-cygwin to tmake_file.
Prepent i386/t-mingw-pthread to tmake_file for posix threads.
(i[34567]86-*-mingw*): Set tmake_eh_file, tmake_dlldir_file.
Prepend $tmake_eh_file, $tmake_dlldir_file, i386/t-slibgcc-cygming
to tmake_file.
Add i386/t-mingw32 to tmake_file.
(x86_64-*-mingw*): Likewise.
(ia64*-*-freebsd*): Append to tmake_file.
(ia64*-*-linux*): Append to tmake_file.
Replace ia64/t-glibc by ia64/t-linux.
Replace ia64/t-glibc-libunwind by ia64/t-linux-libunwind if using
system libunwind.
(ia64*-*-hpux*): Add t-slibgcc, ia64/t-slibgcc-hpux,
t-slibgcc-hpux to tmake_file.
(ia64-hp-*vms*): Add t-slibgcc-vms to tmake_file.
(m32r-*-linux*): Append to tmake_file, add m32r/t-linux.
(m32rle-*-linux*): Likewise.
(m68k-*-linux*)): Add m68k/t-slibgcc-elf-ver to tmake_file unless
sjlj exceptions.
(microblaze*-linux*): New case.
Append to tmake_file, add t-slibgcc-nolc-override.
(powerpc-*-freebsd*): Add t-slibgcc-libgcc to tmake_file.
(powerpc-*-linux*, powerpc64-*-linux*): Likewise.
Replace rs6000/t-ldbl128 by rs6000/t-linux in tmake_file.
(rs6000-ibm-aix4.[3456789]*, powerpc-ibm-aix4.[3456789]*): Add
rs6000/t-slibgcc-aix to tmake_file.
(rs6000-ibm-aix5.1.*, powerpc-ibm-aix5.1.*): Likewise.
(rs6000-ibm-aix[56789].*, powerpc-ibm-aix[56789].*): Likewise.
(sh-*-elf*, sh[12346l]*-*-elf*, sh-*-linux*)
(sh[2346lbe]*-*-linux*, sh-*-netbsdelf*, shl*-*-netbsdelf*)
(sh5-*-netbsd*, sh5l*-*-netbsd*, sh64-*-netbsd*)
(sh64l*-*-netbsd*): Add t-slibgcc-libgcc to tmake_file for
sh*-*-linux*.
(sparc-*-linux*): Append to tmake_file for *-leon*.
Add sparc/t-linux to tmake_file for non-Leon targets.
(sparc64-*-linux*): Add sparc/t-linux to tmake_file.
(tic6x-*-uclinux): New case.
Add t-slibgcc, t-slibgcc-gld, t-slibgcc-elf-ver to tmake_file.
(tic6x-*-*): Add c6x/t-elf to tmake_file.
(xtensa*-*-linux*): Append to tmake_file, add xtensa/t-linux.
(am33_2.0-*-linux*): Append to tmake_file.
(i[34567]86-*-linux*, x86_64-*-linux*, i[34567]86-*-kfreebsd*-gnu)
(i[34567]86-*-knetbsd*-gnu, i[34567]86-*-gnu*): Also handle
x86_64-*-kfreebsd*-gnu.
Add i386/t-linux to tmake_file.
From-SVN: r180767
|
|
and iso-fortran-env.def.
2011-10-09 Tobias Burnus <burnus@net-b.de>
* Make-lang.in (F95_PARSER_OBJS, GFORTRAN_TRANS_DEPS): Add
dependency on iso-c-binding.def and iso-fortran-env.def.
* module.c (import_iso_c_binding_module): Add error when
explicitly importing a nonstandard symbol; extend standard-
depending loading.
* iso-c-binding.def: Add c_float128 and c_float128_complex
integer parameters (for -std=gnu).
* intrinsic.texi (ISO_C_Binding): Document them.
* symbol.c (generate_isocbinding_symbol): Change macros
to ignore GFC_STD_* data.
* trans-types.c (gfc_init_c_interop_kinds): Ditto; make
nonstatic and renamed from "init_c_interop_kinds".
(gfc_init_kinds): Don't call it
* trans-types.h (gfc_init_c_interop_kinds): Add prototype.
* f95-lang.c (gfc_init_decl_processing): Call it.
2011-10-09 Tobias Burnus <burnus@net-b.de>
* gfortran.dg/iso_c_binding_param_1.f90: New.
* gfortran.dg/iso_c_binding_param_2.f90: New.
* gfortran.dg/c_sizeof_2.f90: Update dg-error.
From-SVN: r179725
|
|
(CFLAGS-c-family/c-pch.o, CFLAGS-prefix.o, CFLAGS-version.o)
(CFLAGS-lto-compress.o, CFLAGS-toplev.o, CFLAGS-intl.o)
(CFLAGS-cppbuiltin.o, CFLAGS-cppdefault.o): New.
(collect2.o, c-family/c-cppbuiltin.o, c-family/c-opts.o)
(c-family/c-pch.o, prefix.o, version.o, lto-compress.o, toplev.o)
(intl.o, cppbuiltin.o, cppdefault.o): Remove explicit compilation
rules.
(lto-wrapper$(exeext)): Use $(LINKER) not $(COMPILER).
ada:
* gcc-interface/Make-lang.in (CFLAGS-ada/tracebak.o)
(CFLAGS-ada/targext.o, CFLAGS-ada/cio.o, CFLAGS-ada/init.o)
(CFLAGS-ada/initialize.o, CFLAGS-ada/raise.o): New.
(ada/tracebak.o, ada/targext.o, ada/cio.o, ada/init.o)
(ada/initialize.o, ada/raise.o): Remove explicit compilation rules.
fortran:
* Make-lang.in (fortran/cpp.o): Remove explicit compilation rule.
go:
* Make-lang.in (CFLAGS-go/go-lang.o): New.
(go/go-lang.o): Remove explicit compilation rule.
java:
* Make-lang.in (CFLAGS-java/jcf-io.o, CFLAGS-java/jcf-path.o):
New.
(java/jcf-io.o, java/jcf-path.o): Remove explicit compilation
rules.
From-SVN: r178030
|
|
gcc:
* config/sparc/driver-sparc.c: New file.
* config/sparc/x-sparc: New file.
* config.host: Use driver-sparc.o, sparc/x-sparc on
sparc*-*-solaris2*.
* config/sparc/sparc.opt (native): New value for enum
processor_type.
* config/sparc/sparc-opts.h (PROCESSOR_NATIVE): Declare.
* config/sparc/sparc.c (sparc_option_override): Abort if
PROCESSOR_NATIVE gets here.
* config/sparc/sol2.h [__sparc__] (host_detect_local_cpu): Declare.
(EXTRA_SPEC_FUNCTIONS, MCPU_MTUNE_NATIVE_SPECS,
DRIVER_SELF_SPECS): Define.
* doc/invoke.texi (SPARC Options, -mcpu): Document native.
(SPARC Options, -mtune): Likewise.
* configure.ac (EXTRA_GCC_LIBS): Check for libkstat.
Substitute result.
* configure: Regenerate.
* Makefile.in (EXTRA_GCC_LIBS): Set.
(xgcc$(exeext)): Add $(EXTRA_GCC_LIBS).
(cpp$(exeext)): Likewise.
gcc/cp:
* Make-lang.in (g++$(exeext)): Add $(EXTRA_GCC_LIBS).
gcc/fortran:
* Make-lang.in (gfortran$(exeext)): Add $(EXTRA_GCC_LIBS).
gcc/go:
* Make-lang.in (gccgo$(exeext)): Add $(EXTRA_GCC_LIBS).
gcc/java:
* Make-lang.in ($(XGCJ)$(exeext)): Add $(EXTRA_GCC_LIBS).
From-SVN: r177559
|
|
* Makefile.in (dg_target_exps): Set.
(check_gcc_parallelize): Parallelize gcc testing into 10 jobs
instead of 7, try to divide it more evenly.
* Make-lang.in (check_gfortran_parallelize): Parallelize dg.exp
into 6 jobs instead of 3.
* testsuite/Makefile.am (check_DEJAGNU_normal_targets): Add
check-DEJAGNUnormal[4-9].
(check-DEJAGNU): Split into 10 jobs for parallel testing instead of 4.
* testsuite/Makefile.in: Regenerated.
From-SVN: r175238
|
|
* Makefile.in (GCC_OBJS): Remove opts-common.o and options.o.
(OBJS): Remove options.o, opts-common.o and prefix.o.
(OBJS-libcommon-target): New.
(ALL_HOST_BACKEND_OBJS): Include $(OBJS-libcommon-target).
(BACKEND): Include libcommon-target.a.
(MOSTLYCLEANFILES): Include libcommon-target.a.
(libcommon-target.a): New.
(xgcc$(exeext), cpp$(exeext)): Use libcommon-target.a instead of
prefix.o.
ada:
* gcc-interface/Make-lang.in (GNAT1_OBJS): Don't include
$(EXTRA_GNAT1_OBJS).
(GNATBIND_OBJS): Don't include $(EXTRA_GNATBIND_OBJS).
(EXTRA_GNAT1_OBJS, EXTRA_GNATBIND_OBJS): Remove.
(gnat1$(exeext), gnatbind$(exeext)): Use libcommon-target.a.
* gcc-interface/Makefile.in (EXTRA_GNATTOOLS_OBJS): Use
libcommon-target.a instead of prefix.o.
cp:
* Make-lang.in (GXX_OBJS): Remove prefix.o.
(g++$(exeext)): Use libcommon-target.a.
(CXX_C_OBJS): Remove prefix.o.
fortran:
* Make-lang.in (GFORTRAN_D_OBJS): Remove prefix.o.
(gfortran$(exeext)): Use libcommon-target.a.
go:
* Make-lang.in (GCCGO_OBJS): Remove prefix.o.
(gccgo$(exeext)): Use libcommon-target.a.
java:
* Make-lang.in ($(XGCJ)$(exeext)): Use libcommon-target.a instead
of prefix.o.
From-SVN: r174109
|
|
* Makefile.in (LIBDEPS): Add libcommon.a.
(LIBS): Likewise.
(GCC_OBJS): Remove diagnostic.o, pretty-print.o and input.o.
(OBJS-common): Remove diagnostic.o, input.o, intl.o,
pretty-print.o and version.o.
(OBJS-libcommon): New.
(ALL_HOST_BACKEND_OBJS): Add $(OBJS-libcommon).
(BACKEND): Add libcommon.a.
(MOSTLYCLEANFILES): Likewise.
(libcommon.a): New.
(xgcc$(exeext)): Don't explicitly use version.o and intl.o.
(cpp$(exeext)): Likewise.
(COLLECT2_OBJS): Remove intl.o, version.o, diagnostic.o,
pretty-print.o and input.o.
(lto-wrapper$(exeext)): Don't explicitly use intl.o.
(lto-wrapper.o): Depend on $(DIAGNOSTIC_H).
(errors.o): Remove.
(mips-tfile): Don't explicitly use version.o.
(mips-tdump): Likewise.
(gcov.o): Depend on $(DIAGNOSTIC_H).
(gcov-dump.o): Depend on intl.h and $(DIAGNOSTIC_H).
(GCOV_OBJS): Remove intl.o, version.o and errors.o.
(GCOV_DUMP_OBJS): Remove version.o and errors.o.
* gcov-dump.c: Include intl.h and diagnostic.h.
(main): Initialize diagnostics.
* gcov.c: Include diagnostic.h.
(fnotice): Remove.
(main): Initialize diagnostics.
* lto-wrapper.c: Include diagnostic.h.
(main): Initialize diagnostics.
ada:
* gcc-interface/Make-lang.in (EXTRA_GNATBIND_OBJS): Remove
version.o.
* gcc-interface/Makefile.in (EXTRA_GNATTOOLS_OBJS): Use
libcommon.a instead of version.o.
cp:
* Make-lang.in (GXX_OBJS): Remove intl.o and version.o.
fortran:
* Make-lang.in (GFORTRAN_D_OBJS): Remove version.o and intl.o.
go:
* Make-lang.in (GCCGO_OBJS): Remove intl.o and version.o.
java:
* Make-lang.in ($(XGCJ)$(exeext)): Don't explicitly use intl.o and
version.o.
(JCFDUMP_OBJS): Remove errors.o, version.o and intl.o.
(JVGENMAIN_OBJS): Remove errors.o and intl.o.
(java/jcf-dump.o, java/jvgenmain.o): Depend in $(DIAGNOSTIC_H).
* jcf-dump.c: Include diagnostic.h.
(main): Initialize diagnostics.
* jvgenmain.c: Include diagnostic.h.
(main): Initialize diagnostics.
From-SVN: r173958
|
|
* trans-array.c (toplevel): Include gimple.h.
(gfc_trans_allocate_array_storage): Check flag_stack_arrays,
properly expand variable length arrays.
(gfc_trans_auto_array_allocation): If flag_stack_arrays create
variable length decls and associate them with their scope.
* gfortran.h (gfc_option_t): Add flag_stack_arrays member.
* options.c (gfc_init_options): Handle -fstack_arrays option.
* lang.opt (fstack-arrays): Add option.
* invoke.texi (Code Gen Options): Document it.
* Make-lang.in (trans-array.o): Depend on GIMPLE_H.
From-SVN: r172524
|
|
2011-04-03 Kai Tietz <ktietz@redhat.com>
PR middle-end/48422
* Make-lang.in (f95-lang.o): Add some missing dependencies.
From-SVN: r171916
|
|
* Makefile.in (OPTS_H): Define.
(c-decl.o, c-family/c-common.o, c-family/c-opts.o,
c-family/c-pch.o, c-family/c-pragma.o, gcc.o, gccspec.o,
cppspec.o, options.o, gcc-options.o, lto-opts.o, opts.o,
opts-common.o, toplev.o, passes.o, matrix-reorg.o,
ipa-struct-reorg.o, PLUGIN_HEADERS): Use $(OPTS_H).
* gcc.c (driver_handle_option): Take location_t parameter.
(process_command, do_self_spec): Update calls to
read_cmdline_option.
* langhooks-def.h (lhd_handle_option): Take location_t parameter.
* langhooks.c (lhd_handle_option): Take location_t parameter.
* langhooks.h (handle_option): Take location_t parameter.
* lto-opts.c (lto_reissue_options): Update call to set_option.
* opts-common.c (handle_option): Make static. Take location_t
parameter and pass it to other functions.
(handle_generated_option): Take location_t parameter and pass it
to other functions.
(read_cmdline_option): Take location_t parameter and pass it to
other functions. Use warning_at and error_at.
(set_option): Take location_t parameter and pass it to other
functions.
* opts.c (common_handle_option): Take location_t parameter and
pass it to other functions.
(enable_warning_as_error): Make static. Take location_t parameter
and pass it to other functions.
(lang_handle_option): Take location_t parameter and pass it to
other functions.
(target_handle_option): Take location_t parameter.
(read_cmdline_options, maybe_default_option,
maybe_default_options, default_options_optimization,
decode_options): Take location_t parameter and pass it to other
functions.
* opts.h: Include input.h.
(struct cl_option_handler_func, decode_options, set_option,
handle_generated_option, read_cmdline_option): Take location_t
parameters.
(handle_option, enable_warning_as_error): Remove.
* toplev.c (toplev_main): Update call to decode_options.
ada:
* gcc-interface/Make-lang.in (ada/misc.o): Use $(OPTS_H).
* gcc-interface/misc.c (gnat_handle_option): Take location_t
parameter.
c-family:
* c-common.c (parse_optimize_options): Update call to
decode_options.
* c-common.h (c_common_handle_option): Update prototype.
* c-opts.c (c_common_handle_option): Take location_t parameter and
pass it to other functions.
cp:
* Make-lang.in (g++spec.o): Use $(OPTS_H).
fortran:
* Make-lang.in (gfortranspec.o): Use $(OPTS_H).
* gfortran.h (gfc_handle_option): Take location_t parameter.
* options.c (gfc_handle_option): Take location_t parameter.
java:
* Make-lang.in (jvspec.o, java/lang.o): Use $(OPTS_H).
* lang.c (java_handle_option): Take location_t parameter.
lto:
* Make-lang.in (lto/lto.o): Use $(OPTS_H).
* lto-lang.c (lto_handle_option): Take location_t parameter.
From-SVN: r166688
|
|
-fwhopr=jobserver requires telling GNU make that the linker (= lto)
rules support job server, so that the necessary jobserver
information is passed through.
Add + to all the executable targets that run LTO for this purpose.
This improves build performance with a -fwhopr=jobserver
bootstrap (or BUILD_CONFIG=bootstrap-lto) significantly.
I didn't change Ada because that apparently doesn't support LTO.
Passes bootstrap and test suite. Ok to commit?
gcc/
2010-10-04 Andi Kleen <ak@linux.intel.com>
* Makefile.in (xgcc, cpp, cc1, collect2, lto-wrapper, gcov,
gcov-dump, cc1-dummy, genprog, build/gcov-iov):
Add + to build rule.
gcc/cp/
2010-10-04 Andi Kleen <ak@linux.intel.com>
* Make-lang.in (g++, cc1plus): Add + to build rule.
gcc/fortran/
2010-10-04 Andi Kleen <ak@linux.intel.com>
* Make-lang.in (gfortran, f951): Add + to build rule.
gcc/java/
2010-10-04 Andi Kleen <ak@linux.intel.com>
* Make-lang.in (xgcj, jc1, jcf-dump, jvgenmain):
Add + to build rule.
gcc/lto/
2010-10-04 Andi Kleen <ak@linux.intel.com>
* Make-lang.in (lto1): Add + to build rule.
gcc/objc/
2010-10-04 Andi Kleen <ak@linux.intel.com>
* Make-lang.in (cc1obj-dummy, cc1obj): Add + to build rule.
gcc/objcp/
2010-10-04 Andi Kleen <ak@linux.intel.com>
* Make-lang.in (cc1objplus-dummy, cc1objplus): Add + to build rule.
More plus fixes
From-SVN: r164949
|
|
gcc/
* cppbuiltin.c: New file.
* cppbuiltin.h: New file.
* Makefile.in: Take into account cppbuiltin.{h,c}.
gcc/c-family/
* c-cppbuiltin.c (define__GNUC__, builtin_define_type_precision):
Remove.
(c_cpp_builtins): Call functions from cppbuiltin.c instead
of duplicating code.
gcc/fortran/
* cpp.c (cpp_define_builtins): Call functions from cppbuiltin.c
instead of duplicating code.
* Make-lang.in: Add dependency on cppbuiltin.h. Don't define
BASEVER.
From-SVN: r164917
|
|
From-SVN: r163639
|
|
* Makefile.in (gccspec.o, cppspec.o): Update dependencies.
* common.opt (L, nodefaultlibs, nostdlib, pg, static): New
options.
* config/avr/avr.h (LIBSTDCXX): Remove initial "-l".
* config/freebsd.h (MATH_LIBRARY_PROFILE): Remove initial "-l".
* config/i386/djgpp.h (LIBSTDCXX): Remove initial "-l".
* config/rs6000/aix.h (LIBSTDCXX_STATIC): Remove initial "-l".
* config/s390/tpf.h (MATH_LIBRARY, LIBSTDCXX): Remove initial
"-l".
* cppspec.c: Include opts.h.
(lang_specific_driver): Use cl_decoded_option structures.
* doc/tm.texi.in (MATH_LIBRARY): Update documentation.
* doc/tm.texi: Regenerate.
* gcc.c (translate_options): Translate -d to -foutput-class-dir=.
(driver_handle_option): Allow driver options needing no special
processing.
(process_command): Decode options before call to
lang_specific_driver. Pass decoded options to
lang_specific_driver.
* gcc.h (lang_specific_driver): Update prototype.
* gccspec.c: Include opts.h.
(lang_specific_driver): Use cl_decoded_option structures.
* opts-common.c (option_ok_for_language, generate_option,
generate_option_input_file): New.
(decode_cmdline_option): Use option_ok_for_language.
(decode_cmdline_options_to_array): Use generate_option_input_file.
(handle_generated_option): Use generate_option.
* opts.h (generate_option, generate_option_input_file): Declare.
cp:
* Make-lang.in (g++spec.o): Update dependencies.
* g++spec.c: Include opts.h
(MATH_LIBRARY, LIBSTDCXX): Remove initial "-l".
(lang_specific_driver): Use cl_decoded_option structures.
fortran:
* Make-lang.in (gfortranspec.o): Update dependencies.
* gfortranspec.c: Include coretypes.h before gcc.h. Include
opts.h.
(MATH_LIBRARY, FORTRAN_LIBRARY): Remove initial "-l".
(ADD_ARG_LIBGFORTRAN, Option, lookup_option): Remove.
(g77_xargc): Make unsigned.
(g77_xargv): Change to g77_x_decoded_options.
(g77_newargc): Make unsigned.
(g77_newargv): Change to g77_new_decoded_options.
(strings_same, options_same): New.
(append_arg): Use cl_decoded_option structures.
(append_option): New.
(add_arg_libgfortran): New.
(lang_specific_driver): Use cl_decoded_option structures.
java:
* Make-lang.in (jvspec.o): Update dependencies.
* jvspec.c: Include opts.h.
(PARAM_ARG): Remove.
(find_spec_file): Do not add leading -specs=.
(lang_specific_driver): Use cl_decoded_option structures.
* lang.opt (C, CLASSPATH, D, bootclasspath, classpath, encoding,
extdirs, fmain=, s-bc-abi): New options.
From-SVN: r163459
|
|
2010-07-25 Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/40628
* Make-lang.in: Add fortran/frontend-passes.o.
* gfortran.h: Add prototype for gfc_run_passes.
* resolve.c (gfc_resolve): Call gfc_run_passes.
* frontend-passes.c: New file.
2010-07-25 Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/40628
* trim_optimize_1.f90: New test.
* character_comparision_1.f90: New test.
From-SVN: r162519
|
|
gcc/ChangeLog:
2010-06-28 Steven Bosscher <steven@gcc.gnu.org>
* system.h: Poison GCC_EXCEPT_H for front-end files.
* langhooks.h (struct lang_hooks): Add eh_protect_cleanup_actions
langhook.
* langhooks-def.h (LANG_HOOKS_EH_PROTECT_CLEANUP_ACTIONS) New.
Define to NULL by default.
* except.h: Define GCC_EXCEPT_H.
(doing_eh): Remove prototype.
(init_eh, init_eh_for_function): Move prototypes to toplev.h.
(lang_protect_cleanup_actions): Remove.
* except.c (lang_protect_cleanup_actions): Remove.
(doing_eh): Remove.
(gen_eh_region): Don't check doing_eh here.
* toplev.h (init_eh, init_eh_for_function_): Moved from except.h.
* tree-eh.c (honor_protect_cleanup_actions): Use new langhook
instead of lang_protect_cleanup_actions.
* omp-low.c (maybe_catch_exception): Likewise.
* Makefile.in: Update dependencies.
gcc/c-family/ChangeLog:
2010-06-28 Steven Bosscher <steven@gcc.gnu.org>
* c-cppbuiltin.c: Do not include except.h.
gcc/objc/ChangeLog:
2010-06-28 Steven Bosscher <steven@gcc.gnu.org>
* objc-act.c: Do not include except.h.
gcc/cp/ChangeLog:
2010-06-28 Steven Bosscher <steven@gcc.gnu.org>
* init.c: Do not include except.h.
* decl.c: Likewise.
* expr.c: Likewise.
* cp-lang.c: Likewise.
* pt.c: Likewise.
* semantics.c: Likewise.
* decl2.c: Likewise.
* except.c: Likewise.
(init_exception_processing): Do not set the removed
lang_protect_cleanup_actions here.
(cp_protect_cleanup_actions): Make non-static and remove prototype.
(doing_eh): New, moved from except.c but removed the do_warning flag.
(expand_start_catch_block): Update doing_eh call.
(expand_end_catch_block): Likewise.
(build_throw): Likewise.
* cp-tree.h: Prototype cp_protect_cleanup_actions.
* cp-objcp-common.h: Set LANG_HOOKS_EH_PROTECT_CLEANUP_ACTIONS to
cp_protect_cleanup_actions.
* Make-lang.in: Update dependencies.
gcc/objcp/ChangeLog:
2010-06-28 Steven Bosscher <steven@gcc.gnu.org>
* objcp-lang.c: Do not include except.h.
* Make-lang.in: Update dependencies.
gcc/java/ChangeLog:
2010-06-28 Steven Bosscher <steven@gcc.gnu.org>
* lang.c: Do not include except.h
* except.c: Likewise.
(doing_eh): New, moved from except.c (in gcc/) but removed the
do_warning flag.
(maybe_start_try): Update doing_eh call.
* Make-lang.in: Update dependencies.
gcc/ada/ChangeLog:
2010-06-28 Steven Bosscher <steven@gcc.gnu.org>
* gcc-interface/misc.c: Do not include except.h.
* gcc-interface/Make-lang.in: Update dependencies.
gcc/fortran/ChangeLog:
2010-06-28 Steven Bosscher <steven@gcc.gnu.org>
* Make-lang.in: Update dependencies.
From-SVN: r161484
|
|
gcc/ChangeLog:
* real: Do not include gmp.h, mpfr.h, and mpc.h.
(REAL_VALUE_NEGATE, REAL_VALUE_ABS, real_arithmetic2): Remove.
(real_value_negate, real_value_abs): New prototypes.
(do_mpc_arg2, real_from_mpfr, mpfr_from_real): Move from here...
* realmpfr.h (do_mpc_arg2, real_from_mpfr, mpfr_from_real): ...to here,
new include file for interface between MPFR and REAL_VALUE_TYPE.
* real.c: Include realmpfr.h.
(real_arithmetic2): Remove legacy function.
(real_value_negate): New.
(real_value_abs): New.
(mfpr_from_real, real_from_mpfr): Move from here...
* realmpfr.c (mpfr_from_real, real_from_mpfr): ...to here, new file.
* builtins.c: Include realmpfr.h.
* fold-const.c: Include realmpfr.h.
(fold_comparison): Use real_value_negate instead of REAL_VALUE_NEGATE.
(fold_negate_const): Likewise.
(fold_abs_const): Use real_value_abs instead of REAL_VALUE_ABS.
* toplev.c: Include realmpfr.h.
* simplify-rtx.c (simplify_const_unary_operation): Use real_value_abs
and real_value_negate.
* fixed-value.c (check_real_for_fixed_mode): Likewise.
* config/arm/arm.c (neg_const_double_rtx_ok_for_fpa): Likewise.
(vfp3_const_double_index): Likewise.
(arm_print_operand): Likewise.
* Makefile.in: Update dependencies.
fortran/ChangeLog:
* trans-const.c: Include realmpfr.h.
* Make-lang.in: Update dependencies.
From-SVN: r159679
|
|
here from other places.
2010-05-17 Janus Weil <janus@gcc.gnu.org>
* class.c (gfc_add_component_ref,gfc_class_null_initializer,
gfc_build_class_symbol,add_proc_component,add_proc_comps,
add_procs_to_declared_vtab1,copy_vtab_proc_comps,
add_procs_to_declared_vtab,add_generic_specifics,
add_generics_to_declared_vtab,gfc_find_derived_vtab,
find_typebound_proc_uop,gfc_find_typebound_proc,
gfc_find_typebound_user_op,gfc_find_typebound_intrinsic_op,
gfc_get_tbp_symtree): Moved here from other places.
* expr.c (gfc_add_component_ref,gfc_class_null_initializer): Move to
class.c.
* gfortran.h (gfc_build_class_symbol,gfc_find_derived_vtab,
gfc_find_typebound_proc,gfc_find_typebound_user_op,
gfc_find_typebound_intrinsic_op,gfc_get_tbp_symtree,
gfc_add_component_ref, gfc_class_null_initializer): Moved to class.c.
* Make-lang.in: Add class.o.
* symbol.c (gfc_build_class_symbol,add_proc_component,add_proc_comps,
add_procs_to_declared_vtab1,copy_vtab_proc_comps,
add_procs_to_declared_vtab,add_generic_specifics,
add_generics_to_declared_vtab,gfc_find_derived_vtab,
find_typebound_proc_uop,gfc_find_typebound_proc,
gfc_find_typebound_user_op,gfc_find_typebound_intrinsic_op,
gfc_get_tbp_symtree): Move to class.c.
From-SVN: r159506
|
|
2010-04-12 Jerry DeLisle <jvdelisle@gcc.gnu.org>
* array.c (extract_element): Restore function from trunk.
(gfc_get_array_element): Restore function from trunk.
(gfc_expand_constructor): Restore check against
flag_max_array_constructor.
* constructor.c (node_copy_and_append): Delete unused.
* gfortran.h: Delete comment and extra include.
* constructor.h: Bump copyright and clean up TODO comments.
* resolve.c: Whitespace.
2010-04-12 Daniel Franke <franke.daniel@gmail.com>
* simplify.c (compute_dot_product): Replaced usage of ADVANCE macro
with direct access access to elements. Adjusted prototype, fixed all
callers.
(gfc_simplify_dot_product): Removed duplicate check for zero-sized
array.
(gfc_simplify_matmul): Removed usage of ADVANCE macro.
(gfc_simplify_spread): Removed workaround, directly insert elements
at a given array position.
(gfc_simplify_transpose): Likewise.
(gfc_simplify_pack): Replaced usage of ADVANCE macro with corresponding
function calls.
(gfc_simplify_unpack): Likewise.
2010-04-12 Daniel Franke <franke.daniel@gmail.com>
* simplify.c (only_convert_cmplx_boz): Renamed to ...
(convert_boz): ... this and moved to start of file.
(gfc_simplify_abs): Whitespace fix.
(gfc_simplify_acos): Whitespace fix.
(gfc_simplify_acosh): Whitespace fix.
(gfc_simplify_aint): Whitespace fix.
(gfc_simplify_dint): Whitespace fix.
(gfc_simplify_anint): Whitespace fix.
(gfc_simplify_and): Replaced if-gate by more common switch-over-type.
(gfc_simplify_dnint): Whitespace fix.
(gfc_simplify_asin): Whitespace fix.
(gfc_simplify_asinh): Moved creation of result-expr out of switch.
(gfc_simplify_atan): Likewise.
(gfc_simplify_atanh): Whitespace fix.
(gfc_simplify_atan2): Whitespace fix.
(gfc_simplify_bessel_j0): Removed ATTRIBUTE_UNUSED.
(gfc_simplify_bessel_j1): Likewise.
(gfc_simplify_bessel_jn): Likewise.
(gfc_simplify_bessel_y0): Likewise.
(gfc_simplify_bessel_y1): Likewise.
(gfc_simplify_bessel_yn): Likewise.
(gfc_simplify_ceiling): Reorderd statements.
(simplify_cmplx): Use convert_boz(), check for constant arguments.
Whitespace fix.
(gfc_simplify_cmplx): Use correct default kind. Removed check for
constant arguments.
(gfc_simplify_complex): Replaced if-gate. Removed check for
constant arguments.
(gfc_simplify_conjg): Whitespace fix.
(gfc_simplify_cos): Whitespace fix.
(gfc_simplify_cosh): Replaced if-gate by more common switch-over-type.
(gfc_simplify_dcmplx): Removed check for constant arguments.
(gfc_simplify_dble): Use convert_boz() and gfc_convert_constant().
(gfc_simplify_digits): Whitespace fix.
(gfc_simplify_dim): Whitespace fix.
(gfc_simplify_dprod): Reordered statements.
(gfc_simplify_erf): Whitespace fix.
(gfc_simplify_erfc): Whitespace fix.
(gfc_simplify_epsilon): Whitespace fix.
(gfc_simplify_exp): Whitespace fix.
(gfc_simplify_exponent): Use convert_boz().
(gfc_simplify_floor): Reorderd statements.
(gfc_simplify_gamma): Whitespace fix.
(gfc_simplify_huge): Whitespace fix.
(gfc_simplify_iand): Whitespace fix.
(gfc_simplify_ieor): Whitespace fix.
(simplify_intconv): Use gfc_convert_constant().
(gfc_simplify_int): Use simplify_intconv().
(gfc_simplify_int2): Reorderd statements.
(gfc_simplify_idint): Reorderd statements.
(gfc_simplify_ior): Whitespace fix.
(gfc_simplify_ishftc): Removed duplicate type check.
(gfc_simplify_len): Use range_check() instead of manual range check.
(gfc_simplify_lgamma): Removed ATTRIBUTE_UNUSED. Whitespace fix.
(gfc_simplify_log): Whitespace fix.
(gfc_simplify_log10): Whitespace fix.
(gfc_simplify_minval): Whitespace fix.
(gfc_simplify_maxval): Whitespace fix.
(gfc_simplify_mod): Whitespace fix.
(gfc_simplify_modulo): Whitespace fix.
(simplify_nint): Reorderd statements.
(gfc_simplify_not): Whitespace fix.
(gfc_simplify_or): Replaced if-gate by more common switch-over-type.
(gfc_simplify_radix): Removed unused result-variable. Whitespace fix.
(gfc_simplify_range): Removed unused result-variable. Whitespace fix.
(gfc_simplify_real): Use convert_boz() and gfc_convert_constant().
(gfc_simplify_realpart): Whitespace fix.
(gfc_simplify_selected_char_kind): Removed unused result-variable.
(gfc_simplify_selected_int_kind): Removed unused result-variable.
(gfc_simplify_selected_real_kind): Removed unused result-variable.
(gfc_simplify_sign): Whitespace fix.
(gfc_simplify_sin): Whitespace fix.
(gfc_simplify_sinh): Replaced if-gate by more common switch-over-type.
(gfc_simplify_sqrt): Avoided goto by inlining check. Whitespace fix.
(gfc_simplify_tan): Replaced if-gate by more common switch-over-type.
(gfc_simplify_tanh): Replaced if-gate by more common switch-over-type.
(gfc_simplify_xor): Replaced if-gate by more common switch-over-type.
2010-04-12 Daniel Franke <franke.daniel@gmail.com>
* gfortran.h (gfc_start_constructor): Removed.
(gfc_get_array_element): Removed.
* array.c (gfc_start_constructor): Removed, use gfc_get_array_expr
instead. Fixed all callers.
(extract_element): Removed.
(gfc_expand_constructor): Temporarily removed check for
max-array-constructor. Will be re-introduced later if still required.
(gfc_get_array_element): Removed, use gfc_constructor_lookup_expr
instead. Fixed all callers.
* expr.c (find_array_section): Replaced manual lookup of elements
by gfc_constructor_lookup.
2010-04-12 Daniel Franke <franke.daniel@gmail.com>
* gfortran.h (gfc_get_null_expr): New prototype.
(gfc_get_operator_expr): New prototype.
(gfc_get_character_expr): New prototype.
(gfc_get_iokind_expr): New prototype.
* expr.c (gfc_get_null_expr): New.
(gfc_get_character_expr): New.
(gfc_get_iokind_expr): New.
(gfc_get_operator_expr): Moved here from matchexp.c (build_node).
* matchexp.c (build_node): Renamed and moved to
expr.c (gfc_get_operator_expr). Reordered arguments to match
other functions. Fixed all callers.
(gfc_get_parentheses): Use specific function to build expr.
* array.c (gfc_match_array_constructor): Likewise.
* arith.c (eval_intrinsic): Likewise.
(gfc_hollerith2int): Likewise.
(gfc_hollerith2real): Likewise.
(gfc_hollerith2complex): Likewise.
(gfc_hollerith2logical): Likewise.
* data.c (create_character_intializer): Likewise.
* decl.c (gfc_match_null): Likewise.
(enum_initializer): Likewise.
* io.c (gfc_match_format): Likewise.
(match_io): Likewise.
* match.c (gfc_match_nullify): Likewise.
* primary.c (match_string_constant): Likewise.
(match_logical_constant): Likewise.
(build_actual_constructor): Likewise.
* resolve.c (build_default_init_expr): Likewise.
* symbol.c (generate_isocbinding_symbol): Likewise.
(gfc_build_class_symbol): Likewise.
(gfc_find_derived_vtab): Likewise.
* simplify.c (simplify_achar_char): Likewise.
(gfc_simplify_adjustl): Likewise.
(gfc_simplify_adjustr): Likewise.
(gfc_simplify_and): Likewise.
(gfc_simplify_bit_size): Likewise.
(gfc_simplify_is_iostat_end): Likewise.
(gfc_simplify_is_iostat_eor): Likewise.
(gfc_simplify_isnan): Likewise.
(simplify_bound): Likewise.
(gfc_simplify_leadz): Likewise.
(gfc_simplify_len_trim): Likewise.
(gfc_simplify_logical): Likewise.
(gfc_simplify_maxexponent): Likewise.
(gfc_simplify_minexponent): Likewise.
(gfc_simplify_new_line): Likewise.
(gfc_simplify_null): Likewise.
(gfc_simplify_or): Likewise.
(gfc_simplify_precision): Likewise.
(gfc_simplify_repeat): Likewise.
(gfc_simplify_scan): Likewise.
(gfc_simplify_size): Likewise.
(gfc_simplify_trailz): Likewise.
(gfc_simplify_trim): Likewise.
(gfc_simplify_verify): Likewise.
(gfc_simplify_xor): Likewise.
* trans-io.c (build_dt): Likewise.
(gfc_new_nml_name_expr): Removed.
2010-04-12 Daniel Franke <franke.daniel@gmail.com>
* arith.h (gfc_constant_result): Removed prototype.
* constructor.h (gfc_build_array_expr): Removed prototype.
(gfc_build_structure_constructor_expr): Removed prototype.
* gfortran.h (gfc_int_expr): Removed prototype.
(gfc_logical_expr): Removed prototype.
(gfc_get_array_expr): New prototype.
(gfc_get_structure_constructor_expr): New prototype.
(gfc_get_constant_expr): New prototype.
(gfc_get_int_expr): New prototype.
(gfc_get_logical_expr): New prototype.
* arith.c (gfc_constant_result): Moved and renamed to
expr.c (gfc_get_constant_expr). Fixed all callers.
* constructor.c (gfc_build_array_expr): Moved and renamed to
expr.c (gfc_get_array_expr). Split gfc_typespec argument to type
and kind. Fixed all callers.
(gfc_build_structure_constructor_expr): Moved and renamed to
expr.c (gfc_get_structure_constructor_expr). Split gfc_typespec argument
to type and kind. Fixed all callers.
* expr.c (gfc_logical_expr): Renamed to ...
(gfc_get_logical_expr): ... this. Added kind argument. Fixed all callers.
(gfc_int_expr): Renamed to ...
(gfc_get_int_expr): ... this. Added kind and where arguments. Fixed all
callers.
(gfc_get_constant_expr): New.
(gfc_get_array_expr): New.
(gfc_get_structure_constructor_expr): New.
* simplify.c (int_expr_with_kind): Removed, callers use gfc_get_int_expr
instead.
2010-04-12 Daniel Franke <franke.daniel@gmail.com>
* constructor.h: New.
* constructor.c: New.
* Make-lang.in: Add new files to F95_PARSER_OBJS.
* arith.c (reducy_unary): Use constructor API.
(reduce_binary_ac): Likewise.
(reduce_binary_ca): Likewise.
(reduce_binary_aa): Likewise.
* check.c (gfc_check_pack): Likewise.
(gfc_check_reshape): Likewise.
(gfc_check_unpack): Likewise.
* decl.c (add_init_expr_to_sym): Likewise.
(build_struct): Likewise.
* dependency.c (gfc_check_dependency): Likewise.
(contains_forall_index_p): Likewise.
* dump-parse-tree.c (show_constructor): Likewise.
* expr.c (free_expr0): Likewise.
(gfc_copy_expr): Likewise.
(gfc_is_constant_expr): Likewise.
(simplify_constructor): Likewise.
(find_array_element): Likewise.
(find_component_ref): Likewise.
(find_array_section): Likewise.
(find_substring_ref): Likewise.
(simplify_const_ref): Likewise.
(scalarize_intrinsic_call): Likewise.
(check_alloc_comp_init): Likewise.
(gfc_default_initializer): Likewise.
(gfc_traverse_expr): Likewise.
* iresolve.c (check_charlen_present): Likewise.
(gfc_resolve_reshape): Likewise.
(gfc_resolve_transfer): Likewise.
* module.c (mio_constructor): Likewise.
* primary.c (build_actual_constructor): Likewise.
(gfc_match_structure_constructor): Likewise.
* resolve.c (resolve_structure_cons): Likewise.
* simplify.c (is_constant_array_expr): Likewise.
(init_result_expr): Likewise.
(transformational_result): Likewise.
(simplify_transformation_to_scalar): Likewise.
(simplify_transformation_to_array): Likewise.
(gfc_simplify_dot_product): Likewise.
(simplify_bound): Likewise.
(simplify_matmul): Likewise.
(simplify_minval_maxval): Likewise.
(gfc_simplify_pack): Likewise.
(gfc_simplify_reshape): Likewise.
(gfc_simplify_shape): Likewise.
(gfc_simplify_spread): Likewise.
(gfc_simplify_transpose): Likewise.
(gfc_simplify_unpack): Likewise.q
(gfc_convert_constant): Likewise.
(gfc_convert_char_constant): Likewise.
* target-memory.c (size_array): Likewise.
(encode_array): Likewise.
(encode_derived): Likewise.
(interpret_array): Likewise.
(gfc_interpret_derived): Likewise.
(expr_to_char): Likewise.
(gfc_merge_initializers): Likewise.
* trans-array.c (gfc_get_array_constructor_size): Likewise.
(gfc_trans_array_constructor_value): Likewise.
(get_array_ctor_strlen): Likewise.
(gfc_constant_array_constructor_p): Likewise.
(gfc_build_constant_array_constructor): Likewise.
(gfc_trans_array_constructor): Likewise.
(gfc_conv_array_initializer): Likewise.
* trans-decl.c (check_constant_initializer): Likewise.
* trans-expr.c (flatten_array_ctors_without_strlen): Likewise.
(gfc_apply_interface_mapping_to_cons): Likewise.
(gfc_trans_structure_assign): Likewise.
(gfc_conv_structure): Likewise.
* array.c (check_duplicate_iterator): Likewise.
(match_array_list): Likewise.
(match_array_cons_element): Likewise.
(gfc_match_array_constructor): Likewise.
(check_constructor_type): Likewise.
(check_constructor): Likewise.
(expand): Likewise.
(expand_constructor): Likewise.
(extract_element): Likewise.
(gfc_expanded_ac): Likewise.
(resolve_array_list): Likewise.
(gfc_resolve_character_array_constructor): Likewise.
(copy_iterator): Renamed to ...
(gfc_copy_iterator): ... this.
(gfc_append_constructor): Removed.
(gfc_insert_constructor): Removed unused function.
(gfc_get_constructor): Removed.
(gfc_free_constructor): Removed.
(qgfc_copy_constructor): Removed.
* gfortran.h (struct gfc_expr): Removed member 'con_by_offset'.
Removed all references. Replaced constructor list by splay-tree.
(struct gfc_constructor): Removed member 'next', moved 'offset' from
the inner struct, added member 'base'.
(gfc_append_constructor): Removed prototype.
(gfc_insert_constructor): Removed prototype.
(gfc_get_constructor): Removed prototype.
(gfc_free_constructor): Removed prototype.
(qgfc_copy_constructor): Removed prototype.
(gfc_copy_iterator): New prototype.
* trans-array.h (gfc_constant_array_constructor_p): Adjusted prototype.
From-SVN: r158253
|
|
* ada/gcc-interface/Make-lang.in, alias.c, attribs.c, auto-inc-dec.c,
basic-block.h, bb-reorder.c, calls.c, c-common.c, cgraph.h,
collect2.h, config/alpha/alpha.c, config/alpha/alpha.md,
config/alpha/predicates.md, config/arm/arm.md,
config/arm/lib1funcs.asm, config/arm/neon-schedgen.ml,
config/avr/avr.c, config/avr/avr.md, config/bfin/bfin.c,
config/darwin9.h, config/darwin.c, config/darwin.h,
config/h8300/h8300.c, config/i386/cpuid.h, config/i386/cygming.h,
config/i386/cygwin.h, config/i386/mingw32.h, config/i386/msformat-c.c,
config/i386/sol2-10.h, config/i386/xopintrin.h, config/ia64/ia64.c,
config/ia64/ia64.md, config/ia64/sync.md, config/mep/mep.c,
config/mips/mips.md, config/mn10300/mn10300.c,
config/mn10300/mn10300.h, config/pa/pa.c, config/pa/pa.md,
config/rs6000/aix.h, config/rs6000/dfp.md,
config/rs6000/rs6000-builtin.def, config/rs6000/rs6000-c.c,
config/rs6000/vector.md, config/rtems.h, config/rx/rx.md,
config/s390/s390.md, config/sol2-c.c, config/sparc/sol2-bi.h,
config/sparc/sol2-gas.h, config/sparc/sparc.h, config/sparc/sparc.md,
config/sparc/sparc-protos.h, config/spu/spu.c, config/spu/spu-c.c,
config/t-darwin, convert.c, c.opt, c-opts.c, cp/Make-lang.in,
c-pretty-print.c, c-typeck.c, df-core.c, df-scan.c, diagnostic.c,
diagnostic.h, doc/cppopts.texi, doc/cpp.texi, doc/extend.texi,
doc/gimple.texi, doc/languages.texi, doc/plugins.texi, doc/rtl.texi,
doc/standards.texi, doc/tree-ssa.texi, doc/trouble.texi, dominance.c,
fold-const.c, fortran/Make-lang.in, fwprop.c, gcc-plugin.h,
gensupport.c, gimple.h, gimple-iterator.c, graphite.c,
graphite-clast-to-gimple.c, graphite-clast-to-gimple.h,
graphite-dependences.c, graphite-poly.c, graphite-poly.h,
graphite-ppl.c, graphite-ppl.h, graphite-scop-detection.c,
graphite-sese-to-poly.c, graphite-sese-to-poly.h, ifcvt.c, intl.c,
intl.h, ipa.c, ipa-cp.c, ipa-inline.c, ipa-prop.c, ipa-prop.h,
ipa-pure-const.c, ipa-reference.c, ipa-type-escape.c, ira-color.c,
ira-conflicts.c, ira-lives.c, java/Make-lang.in, lambda-code.c,
loop-invariant.c, lto/Make-lang.in, lto-streamer.h, lto-streamer-in.c,
objc/Make-lang.in, objcp/Make-lang.in, omp-low.c, optc-gen.awk,
opt-functions.awk, opth-gen.awk, params.def, passes.c,
postreload-gcse.c, print-tree.c, recog.c, regrename.c, reload.h,
rtl.def, sched-int.h, sched-rgn.c, sel-sched-dump.c, sese.c, sese.h,
store-motion.c, stor-layout.c, tree-cfgcleanup.c, tree-chrec.c,
tree-complex.c, tree-data-ref.c, tree.def, tree-eh.c, tree-flow.h,
tree-flow-inline.h, tree.h, tree-loop-distribution.c, tree-outof-ssa.c,
tree-parloops.c, tree-pass.h, tree-predcom.c, tree-profile.c,
tree-scalar-evolution.c, tree-ssa-address.c, tree-ssa-alias.c,
tree-ssa-coalesce.c, tree-ssa-copy.c, tree-ssa-dce.c, tree-ssa-dom.c,
tree-ssa-dse.c, tree-ssa-loop-im.c, tree-ssa-loop-ivcanon.c,
tree-ssa-loop-manip.c, tree-ssa-math-opts.c, tree-ssa-operands.c,
tree-ssa-pre.c, tree-ssa-sccvn.c, tree-ssa-structalias.c,
tree-ssa-uncprop.c, tree-tailcall.c, tree-vect-data-refs.c,
tree-vect-loop.c, tree-vectorizer.h, tree-vect-slp.c, tree-vrp.c,
unwind-dw2-fde-darwin.c, varpool.c: Update copyright years.
From-SVN: r157950
|
|
* configure.ac: Add install-html to target_list for Make-hooks.
* configure: Regenerate.
* fortran/Make-lang.in (F95_HTMLFILES): New.
(fortran.html): Use it.
(fortran.install-html): New.
* Makefile.in (install-html): Add lang.install-html.
* java/Make-lang.in (JAVA_HTMLFILES): New.
(java.html): Use it.
(java.install-html): New.
* objc/Make-lang.in (objc.install-html): New.
* objcp/Make-lang.in (obj-c++.install-html): New.
* cp/Make-lang.in (c++.install-html): New.
* ada/gcc-interface/Make-lang.in (ada.install-html): New.
* lto/Make-lang.in (lto.install-html): New.
From-SVN: r155602
|
|
2009-07-14 Taras Glek <tglek@mozilla.com>
Rafael Espindola <espindola@google.com>
* doc/sourcebuild.texi: Document install-plugin target.
* configure.ac: Added install-plugin target to language makefiles.
* configure: Regenerate.
* Makefile.in: (install-plugin): Install more headers,
depend on lang.install-plugin.
ada/ChangeLog
* gcc-interface/Make-lang.in (ada.install-plugin): New target for
installing plugin headers.
cp/ChangeLog
* Make-lang.in: Added CP_PLUGIN_HEADERS and
c.install-target to export cp-tree.h cxx-pretty-print.h
name-lookup.h headers for plugins.
fortran/ChangeLog
* Make-lang.in (fortran.install-plugin): New target for
installing plugin headers.
java/ChangeLog
* Make-lang.in (java.install-plugin): New target for
installing plugin headers.
objc/ChangeLog
* Make-lang.in (objc.install-plugin): New target for
installing plugin headers.
objcp/ChangeLog
* Make-lang.in (obj-c.install-plugin): New target for
installing plugin headers.
Co-Authored-By: Rafael Avila de Espindola <espindola@google.com>
From-SVN: r149648
|
|
./: * Makefile.in (LINKER, LINKER_FLAGS): Define.
(LINKER_FOR_BUILD, BUILD_LINKERFLAGS): Define.
(ALL_LINKERFLAGS): Define.
(xgcc$(exeext)): Change $(COMPILER) to $(LINKER).
(cpp$(exeext), cc1-dummy$(exeext), cc1$(exeext)): Likewise.
(collect2$(exeext), mips-tfile, mips-tdump): Likewise.
(gcov$(exeext), gcov-dump$(exeext)): Likewise.
(build/gen%$(build_exeext)): Change $(COMPILER_FOR_BUILD) to
$(LINKER_FOR_BUILD).
(build/gcov-iov$(build_exeext)): Likewise.
cp/:
* Make-lang.in (g++$(exeext)): Change $(COMPILER) to $(LINKER).
(cc1plus-dummy$(exeext), cc1plus$(exeext)): Likewise.
fortran/:
* Make-lang.in (gfortran$(exeext)): Change $(COMPILER) to
$(LINKER).
(f951$(exeext)): Likewise.
java/:
* Make-lang.in ($(XGCJ)$(exeext)): Change $(COMPILER) to
$(LINKER).
(jc1$(exeext), jcf-dump$(exeext), jvgenmain$(exeext)): Likewise.
objc/:
* Make-lang.in (cc1obj-dummy$(exeext)): Change $(COMPILER) to
$(LINKER).
(cc1obj$(exeext)): Likewise.
objcp/:
* Make-lang.in (cc1objplus-dummy$(exeext)): Change $(COMPILER) to
$(LINKER).
(cc1objplus$(exeext)): Likewise.
From-SVN: r147927
|
|
./: * Makefile.in (COMPILER, COMPILER_FLAGS): Define.
(COMPILER_FOR_BUILD, BUILD_COMPILERFLAGS): Define.
(ALL_COMPILERFLAGS): Define.
(.c.o, xgcc$(exeext), cpp$(exeext)): Use $(COMPILER).
(cc1-dummy$(exeext), cc1$(exeext)): Likewise.
(collect2$(exeext), collect2.o): Likewise.
(c-opts.o, c-cppbuiltin.o, c-pch.o, gcc.o, gccspec.o): Likewise.
(gcc-options.o, version.o, prefix.o, toplev.o): Likewise.
($(out_object_file), mips-tfile, mips-tdump): Likewise.
(libbackend.o, intl.o, cppdefault.o): Likewise.
(gcov$(exeext), gcov-dump$(exeext)): Likewise.
(build/%.o): Use $(COMPILER_FOR_BUILD).
(build/gen%$(build_exeext)): Likewise.
(build/gcov-iov$(build_exeext)): LIkewise.
* config/t-darwin (darwin.o): Use $(COMPILER).
(darwin-c.o, darwin-f.o, darwin-driver.o): Likewise.
* config/t-sol2 (sol2-c.o): Likewise.
(sol2.o): Likewise.
* config/t-vxworks (vxworks.o): Likewise.
* config/x-darwin (host-darwin.o): Likewise.
* config/x-hpux (host-hpux.o): Likewise.
* config/x-linux (host-linux.o): Likewise.
* config/x-solaris (host-solaris.o): Likewise.
* config/alpha/x-alpha (driver-alpha.o): Likewise.
* config/arm/t-arm (arm-c.o): Likewise.
* config/arm/t-pe (pe.o): Likewise.
* config/arm/t-wince-pe (pe.o): Likewise.
* config/i386/t-cygming (winnt.o): Likewise.
(winnt-cxx.o, winnt-stubs.o, msformat-c.o): Likewise.
* config/i386/t-cygwin (cygwin1.o): Likewise.
(cygwin2.o): Likewise.
* config/i386/t-i386 (i386-c.o): Likewise.
* config/i386/t-interix (winnt.o): Likewise.
* config/i386/t-netware (netware.o): Likewise.
* config/i386/t-nwld (nwld.o): Likewise.
* config/i386/x-darwin (host-i386-darwin.o): Likewise.
* config/i386/x-i386 (driver-i386.o): Likewise.
* config/i386/x-cygwin (host-cygwin.o): Likewise.
* config/i386/x-mingw32 (host-mingw32.o): Likewise.
* config/ia64/t-ia64 (ia64-c.o): Likewise.
* config/m32c/t-m32c (m32c-pragma.o): Likewise.
* config/mips/x-native (driver-native.o): Likewise.
* config/rs6000/t-rs6000 (rs6000-c.o): Likewise.
* config/rs6000/x-darwin (host-ppc-darwin.o): Likewise.
* config/rs6000/x-darwin64 (host-ppc64-darwin.o): Likewise.
* config/rs6000/x-rs6000 (driver-rs6000.o): Likewise.
* config/score/t-score-elf (score7.o): Likewise.
(score3.o): Likewise.
* config/sh/t-sh (sh-c.o): Likewise.
* config/sh/t-symbian (sh-c.o): Likewise.
(symbian.o): Likewise.
* config/spu/t-spu-elf (spu-c.o): Likewise.
* config/v850/t-v850 (v850-c.o): Likewise.
* config/v850/t-v850e (v850-c.o): Likewise.
ada/:
* gcc-interface/Makefile.in (COMPILER): Define.
(COMPILER_FLAGS, ALL_COMPILERFLAGS): Define.
(.c.o, cio.o, init.o, initialize.o, targext.o): Use $(COMPILER).
(seh_init.o, tracebak.o): Likewise.
* gcc-interface/Make-lang.in (ada/targext.o): Likewise.
(ada/cio.o, ada/init.o, ada/initialize.o, ada/raise.o): Likewise.
(ada/tracebak.o, ada/cuintp.o, ada/decl.o, ada/misc.o): Likewise.
(ada/targtyps.o, ada/trans.o, ada/utils.o): Likewise.
(ada/utils2.o): Likewise.
cp/:
* Make-lang.in (g++spec.o): Use $(COMPILER).
(g++$(exeext), cc1plus-dummy$(exeext)): Likewise.
(cc1plus$(exeext)): Likewise.
fortran/:
* Make-lang.in (gfortranspec.o): Use $(COMPILER).
(gfortran$(exeext), f951$(exeext), fortran/cpp.o): Likewise.
java/:
* Make-lang.in (jvspec.o): Use $(COMPILER).
($(XGCJ)$(exeext), jc1$(exeext), jcf-dump$(exeext)): Likewise.
(jvgenmain$(exeext), java/jcf-io.o, java/jcf-path.o): Likewise.
objc/:
* Make-lang.in (cc1obj-dummy$(exeext)): Use $(COMPILER).
(cc1obj$(exeext)): Likewise.
objcp/:
* Make-lang.in (cc1objplus-dummy$(exeext)): Use $(COMPILER).
(cc1objplus$(exeext), objcp/objcp-act.o): Likwise.
From-SVN: r147873
|
