aboutsummaryrefslogtreecommitdiff
path: root/gcc/configure
AgeCommit message (Collapse)AuthorFilesLines
2020-06-16S/390: Emit vector alignment hints for z13 if AS accepts themStefan Schulze Frielinghaus1-0/+31
Since 87cb9423add vector alignment hints are emitted for target z13, too. This patch changes this behaviour in the sense that alignment hints are only emitted for target z13 if the assembler accepts them. gcc/ChangeLog: * config.in: Regenerate. * config/s390/s390.c (print_operand): Emit vector alignment hints for target z13, if AS accepts them. For other targets the logic stays the same. * config/s390/s390.h (TARGET_VECTOR_LOADSTORE_ALIGNMENT_HINTS): Define macro. * configure: Regenerate. * configure.ac: Check HAVE_AS_VECTOR_LOADSTORE_ALIGNMENT_HINTS_ON_Z13.
2020-06-09When specifying a non-system prefix with --with-zstd, the build fails ↵Michael Kuhn1-0/+2
because the header and library cannot be found (see https://gcc.gnu.org/bugzilla/show_bug.cgi?id=95005). The attached patch fixes the problem and is what we use in Spack to make GCC build with zstd support. gcc/ * Makefile.in (ZSTD_INC): Define. (ZSTD_LIB): Include ZSTD_LDFLAGS. (CFLAGS-lto-compress.o): Add ZSTD_INC. * configure.ac (ZSTD_CPPFLAGS, ZSTD_LDFLAGS): New variables for AC_SUBST. * configure: Rebuilt.
2020-06-08bootstrap: Fix --disable-bootstrap with older g++.Jason Merrill1-995/+2
Previously I had AX_CXX_COMPILE_STDCXX in the gcc directory configure, which added -std=c++11 to CXX if needed, but then CXX is overridden from the toplevel directory, so it didn't have the desired effect. Fixed by moving the check to the toplevel. Currently it is only used when building GCC without bootstrapping; other packages that share the toplevel directory can adjust the condition if they also want to require C++11 support. /ChangeLog: * configure.ac: Check AX_CXX_COMPILE_STDCXX if not bootstrapping. * configure: Regenerate. gcc/ChangeLog: * aclocal.m4: Remove ax_cxx_compile_stdcxx.m4. * configure.ac: Remove AX_CXX_COMPILE_STDCXX. * configure: Regenerate.
2020-05-29Avoid nested save_CFLAGS and save_LDFLAGSH.J. Lu1-6/+6
Avoid nested save_CFLAGS and save_LDFLAGS by replacing save_CFLAGS and save_LDFLAGS with cet_save_CFLAGS and cet_save_LDFLAGS in cet.m4. config/ PR bootstrap/95413 * cet.m4: Replace save_CFLAGS and save_LDFLAGS with cet_save_CFLAGS and cet_save_LDFLAGS. gcc/ PR bootstrap/95413 * configure: Regenerated. libatomic/ PR bootstrap/95413 * configure: Regenerated. libbacktrace/ PR bootstrap/95413 * configure: Regenerated. libcc1/ PR bootstrap/95413 * configure: Regenerated. libcpp/ PR bootstrap/95413 * configure: Regenerated. libdecnumber/ PR bootstrap/95413 * configure: Regenerated. libgcc/ PR bootstrap/95413 * configure: Regenerated. libgfortran/ PR bootstrap/95413 * configure: Regenerated. libgomp/ PR bootstrap/95413 * configure: Regenerated. libiberty/ PR bootstrap/95413 * configure: Regenerated. libitm/ PR bootstrap/95413 * configure: Regenerated. libobjc/ PR bootstrap/95413 * configure: Regenerated. libphobos/ PR bootstrap/95413 * configure: Regenerated. libquadmath/ PR bootstrap/95413 * configure: Regenerated. libsanitizer/ PR bootstrap/95413 * configure: Regenerated. libssp/ PR bootstrap/95413 * configure: Regenerated. libstdc++-v3/ PR bootstrap/95413 * configure: Regenerated. libvtv/ PR bootstrap/95413 * configure: Regenerated. lto-plugin/ PR bootstrap/95413 * configure: Regenerated. zlib/ PR bootstrap/95413 * configure: Regenerated.
2020-05-18bootstrap: Update requirement to C++11.Jason Merrill1-2/+996
There was general agreement last November that we would move to allowing C++11 features to be used in GCC 11; this patch implements that direction. ChangeLog 2020-05-18 Jason Merrill <jason@redhat.com> * configure.ac: Update bootstrap dialect to -std=c++11. config/ChangeLog 2020-05-18 Jason Merrill <jason@redhat.com> * ax_cxx_compile_stdcxx.m4: Import from autoconf archive with an adjustment to try the default mode. gcc/ChangeLog 2020-05-18 Jason Merrill <jason@redhat.com> * aclocal.m4: Add ax_cxx_compile_stdcxx.m4. * configure.ac: Use AX_CXX_COMPILE_STDCXX(11).
2020-05-14x86: Default CET run-time support to autoH.J. Lu1-3/+9
CET has been added since GCC 8. This patch defaults CET run-time support to auto. It enables CET run-time support if asssembler supports CET instructions and multi-byte NOPs are enabled via SSE2. config/ * cet.m4 (GCC_CET_FLAGS): Change default to auto. gcc/ * configure: Regenerated. libatomic/ * configure: Regenerated. libbacktrace/ * configure: Regenerated. libcc1/ * configure: Regenerated. libcpp/ * configure: Regenerated. libdecnumber/ * configure: Regenerated. libgcc/ * configure: Regenerated. libgfortran/ * configure: Regenerated. libgomp/ * configure: Regenerated. libitm/ * configure: Regenerated. libobjc/ * configure: Regenerated. libquadmath/ * configure: Regenerated. libsanitizer/ * configure: Regenerated. libssp/ * configure: Regenerated. libstdc++-v3/ * configure: Regenerated. libvtv/ * configure: Regenerated. zlib/ * configure: Regenerated.
2020-05-12gcc: Enable Intel CET on Intel CET enabled host for jitH.J. Lu1-2/+180
Since on Intel CET enabled host, dlopen in Intel CET enabled applications fails on shared libraries which aren't Intel CET enabled, compile with -fcf-protection on Intel CET enabled host when jit is enabled to enable Intel CET on libgccjit. * Makefile.in (CET_HOST_FLAGS): New. (COMPILER): Add $(CET_HOST_FLAGS). * configure.ac: Add GCC_CET_HOST_FLAGS(CET_HOST_FLAGS) and AC_SUBST(CET_HOST_FLAGS). Clear CET_HOST_FLAGS if jit isn't enabled. * aclocal.m4: Regenerated. * configure: Likewise.
2020-05-05build: Fix 32-bit TLS detection with 64-bit-default gas on Solaris/x86Rainer Orth1-0/+5
I've recently tested i386-pc-solaris2.11 bootstrap on Solaris 11/x86 with only the bundled tools (using /usr/gnu/bin/as from binutils 2.30 in this case). It failed compiling libgo/runtime/proc.c, creating invalid assembly: proc.s: Assembler messages: proc.s:2092: Error: junk at end of line, first unrecognized character is `*' .globl __emutls_v.*runtime.g and several more errors. This is completely unexpected since Solaris does support TLS. It turned out that 32-bit TLS detection in gcc/configure had failed: configure:25145: checking assembler for thread-local storage support configure:25158: /usr/gnu/bin/as --fatal-warnings -o conftest.o conftest.s >&5 conftest.s: Assembler messages: conftest.s:6: Error: relocated field and relocation type differ in signedness conftest.s:7: Error: @TLSLDM reloc is not supported with 64-bit output format conftest.s:7: Error: junk `@tlsldm' after expression which isn't unexpected given that the bundled gas has been configured for x86_64-pc-solaris2.11, i.e. 64-bit-default. This is easily fixed by explicitly passing --32 for the 32-bit case, matching what is done for the 64-bit test. Tested on i386-pc-solaris2.11 with 32-bit-default and 64-bit-default gas as well as with /usr/bin/as, always correctly detecting TLS support. * configure.ac <i[34567]86-*-*>: Add --32 to tls_as_opt on Solaris. * configure: Regenerate.
2020-04-30--with-{documentation,changes}-root-url tweaksJakub Jelinek1-8/+14
> , CHANGES_URL ("gcc-10/changes.html#empty_base"); > > where the macro would just use preprocessor string concatenation? Ok, the following patch implements it (doesn't introduce a separate macro and just uses CHANGES_ROOT_URL "gcc-10/changes.html#empty_base"), in addition adds the documentation Joseph requested. 2020-04-30 Jakub Jelinek <jakub@redhat.com> * configure.ac (--with-documentation-root-url, --with-changes-root-url): Diagnose URL not ending with /, use AC_DEFINE_UNQUOTED instead of AC_SUBST. * opts.h (get_changes_url): Remove. * opts.c (get_changes_url): Remove. * Makefile.in (CFLAGS-opts.o): Don't add -DDOCUMENTATION_ROOT_URL or -DCHANGES_ROOT_URL. * doc/install.texi (--with-documentation-root-url, --with-changes-root-url): Document. * config/arm/arm.c (aapcs_vfp_is_call_or_return_candidate): Don't call get_changes_url and free, change url variable type to const char * and set it to CHANGES_ROOT_URL "gcc-10/changes.html#empty_base". * config/s390/s390.c (s390_function_arg_vector, s390_function_arg_float): Likewise. * config/aarch64/aarch64.c (aarch64_vfp_is_call_or_return_candidate): Likewise. * config/rs6000/rs6000-call.c (rs6000_discover_homogeneous_aggregate): Likewise. * config.in: Regenerate. * configure: Regenerate.
2020-04-29diagnostics: Add %{...%} pretty-format support for URLs and use it in ↵Jakub Jelinek1-2/+23
-Wpsabi diagnostics The following patch attempts to use the diagnostics URL support if available to provide more information about the C++17 empty base and C++20 [[no_unique_address]] empty class ABI changes in -Wpsabi diagnostics. in GCC 10.1 at the end of the diagnostics is then in some terminals underlined with a dotted line and points to a (to be written) anchor in gcc-10/changes.html which we need to write anyway. 2020-04-29 Jakub Jelinek <jakub@redhat.com> * configure.ac (-with-changes-root-url): New configure option, defaulting to https://gcc.gnu.org/. * Makefile.in (CFLAGS-opts.o): Define CHANGES_ROOT_URL for opts.c. * pretty-print.c (get_end_url_string): New function. (pp_format): Handle %{ and %} for URLs. (pp_begin_url): Use pp_string instead of pp_printf. (pp_end_url): Use get_end_url_string. * opts.h (get_changes_url): Declare. * opts.c (get_changes_url): New function. * config/rs6000/rs6000-call.c: Include opts.h. (rs6000_discover_homogeneous_aggregate): Use %{in GCC 10.1%} instead of just in GCC 10.1 in diagnostics and add URL. * config/arm/arm.c (aapcs_vfp_is_call_or_return_candidate): Likewise. * config/aarch64/aarch64.c (aarch64_vfp_is_call_or_return_candidate): Likewise. * config/s390/s390.c (s390_function_arg_vector, s390_function_arg_float): Likewise. * configure: Regenerated. * c-format.c (PP_FORMAT_CHAR_TABLE): Add %{ and %}.
2020-04-29Harden and adjust 'gcc/configure' parsing of '--enable-offload-targets'Thomas Schwinge1-5/+8
Fix-up for commit d228ee80f8578be474595a517a228111fac26c5e "re PR bootstrap/92314 (missing omp-device-properties', needed by 's-omp-device-properties-h')". gcc/ * configure.ac <$enable_offload_targets>: Do parsing as done elsewhere. * configure: Regenerate.
2020-04-29[gcn] Fix 'omp-device-properties-gcn' handlingThomas Schwinge1-1/+1
Fix-up for commit 955cd057454b323419e06affa7df7d59dc3cd1fb "Add gcc/config/gcn/t-omp-device for OpenMP declare variant kind/arch/isa". With AMD GCN offloading configured, I'm seeing occasional GCC build hangs. I've now captured and analyzed one of them: $ ps -f UID PID PPID C STIME TTY TIME CMD [...] tschwing 5113 4508 0 20:24 pts/5 00:00:00 /bin/sh -c rm -f tmp-omp-device-properties.h; \ for kind in kind arch isa; do \ echo 'const char omp_offload_device_'${kind}'[] = ' \ >> tmp-omp-device-properties.h; \ for prop in no tschwing 5126 5113 0 20:24 pts/5 00:00:00 sed -n s/^kind: //p tschwing 5127 5113 0 20:24 pts/5 00:00:00 sed s/[[:blank:]]/ /g;s/ */ /g;s/^ //;s/ $//;s/ /\\0/g;s/^/"/;s/$/\\0\\0"/ [...] $ pstree -p $$ [...]---sh(5113)-+-sed(5126) `-sed(5127) $ ls -lrt build-gcc/gcc/*omp-device* -rw-r--r-- 1 tschwing eeg 39 Apr 23 20:24 build-gcc/gcc/omp-device-properties-nvptx -rw-r--r-- 1 tschwing eeg 634 Apr 23 20:24 build-gcc/gcc/omp-device-properties-i386 -rw-r--r-- 1 tschwing eeg 58 Apr 23 20:24 build-gcc/gcc/tmp-omp-device-properties.h Notably missing is the 'omp-device-properties-gcn' file... $ grep ^ build-gcc/gcc/*omp-device* build-gcc/gcc/omp-device-properties-i386:kind: cpu build-gcc/gcc/omp-device-properties-i386:arch: x86 x86_64 i386 i486 i586 i686 ia32 build-gcc/gcc/omp-device-properties-i386:isa: sse4 cx16 [...] build-gcc/gcc/omp-device-properties-nvptx:kind: gpu build-gcc/gcc/omp-device-properties-nvptx:arch: nvptx build-gcc/gcc/omp-device-properties-nvptx:isa: sm_30 sm_35 build-gcc/gcc/tmp-omp-device-properties.h:const char omp_offload_device_kind[] = build-gcc/gcc/tmp-omp-device-properties.h:"amdgcn-amdhsa\0" ..., which we here seem to be intending to fill into 'tmp-omp-device-properties.h'. $ grep ^omp_device_properties\ = build-gcc/gcc/Makefile omp_device_properties = amdgcn-amdhsa= nvptx-none=omp-device-properties-nvptx x86_64-intelmicemul-linux-gnu=omp-device-properties-i386 Given the 's-omp-device-properties-h' Makefile rule, indeed there is an unescaped '$${props}', which is meant to be the filename following the equals sign -- but there is none for 'amdgcn-amdhsa=', so this tries to read from 'stdin'! The real problem of course is elsewhere. gcc/ * configure.ac <$enable_offload_targets>: 'amdgcn' is 'gcn'. * configure: Regenerate.
2020-04-27Fix warning URLs for Fortran and analyzer [PR 92830]David Malcolm1-1/+1
PR 92830 reports that we always use "gcc/Warning-Options.html" when we emit escaped documentation URLs when printing "[-Wname-of-option]" for a warning. This page is wrong for most Fortran warnings, and for analyzer warnings. I considered various schemes involving adding extra tags to the .opt format to capture where options are documented, but for now this patch fixes the issue by introducing some special-casing logic. It only fixes the URLs for warning options, not for other command-line options, but those are the only options for which get_option_url is currently called. gcc/ChangeLog: PR 92830 * configure.ac (DOCUMENTATION_ROOT_URL): Drop trailing "gcc/" from default value, so that it can by supplied by get_option_html_page. * configure: Regenerate. * opts.c: Include "selftest.h". (get_option_html_page): New function. (get_option_url): Use it. Reformat to place comments next to the expressions they refer to. (selftest::test_get_option_html_page): New. (selftest::opts_c_tests): New. * selftest-run-tests.c (selftest::run_tests): Call selftest::opts_c_tests. * selftest.h (selftest::opts_c_tests): New decl.
2020-03-25Do not error about missing zstd unless --with-zstd.Martin Liska1-1/+1
PR lto/94259 * configure.ac: Report error only when --with-zstd is used. * configure: Regenerate.
2020-03-25Fix handling of --with{,out}-zstd option.Martin Liska1-4/+9
PR lto/94259 * configure.ac: Respect --without-zstd and report error when we can't find header file with --with-zstd. * configure: Regenerate.
2020-02-28Improve detection of ld_date.Martin Liska1-1/+1
PR other/93965 * configure.ac: Improve detection of ld_date by requiring either two dashes or none. * configure: Regenerate.
2020-02-15PR 87488: Add --with-diagnostics-urls configuration optionBernd Edlinger1-2/+39
2020-02-15 David Malcolm <dmalcolm@redhat.com> Bernd Edlinger <bernd.edlinger@hotmail.de> PR 87488 PR other/93168 * config.in (DIAGNOSTICS_URLS_DEFAULT): New define. * configure.ac (--with-diagnostics-urls): New configuration option, based on --with-diagnostics-color. (DIAGNOSTICS_URLS_DEFAULT): New define. * config.h: Regenerate. * configure: Regenerate. * diagnostic.c (diagnostic_urls_init): Handle -1 for DIAGNOSTICS_URLS_DEFAULT from configure-time --with-diagnostics-urls=auto-if-env by querying for a GCC_URLS and TERM_URLS environment variable. * diagnostic-url.h (diagnostic_url_format): New enum type. (diagnostic_urls_enabled_p): rename to... (determine_url_format): ... this, and change return type. * diagnostic-color.c (parse_env_vars_for_urls): New helper function. (auto_enable_urls): Disable URLs on xfce4-terminal, gnome-terminal, the linux console, and mingw. (diagnostic_urls_enabled_p): rename to... (determine_url_format): ... this, and adjust. * pretty-print.h (pretty_printer::show_urls): rename to... (pretty_printer::url_format): ... this, and change to enum. * pretty-print.c (pretty_printer::pretty_printer, pp_begin_url, pp_end_url, test_urls): Adjust. * doc/install.texi (--with-diagnostics-urls): Document the new configuration option. (--with-diagnostics-color): Document the existing interaction with GCC_COLORS better. * doc/invoke.texi (-fdiagnostics-urls): Add GCC_URLS and TERM_URLS vindex reference. Update description of defaults based on the above. (-fdiagnostics-color): Update description of how -fdiagnostics-color interacts with GCC_COLORS.
2020-01-31nios2: Support for GOT-relative DW_EH_PE_datarel encoding.Sandra Loosemore1-0/+37
On nios2-linux-gnu, there has been a long-standing bug in C++ exception handling that sometimes resulted in link errors like ../nios2-linux-gnu/bin/ld: FDE encoding in /tmp/cccfpQ2l.o(.eh_frame) prevents .eh_frame_hdr table being created when building some shared libraries or PIE executables. The root of the problem is that GCC was incorrectly emitting an absolute encoding in EH tables for PIC. This patch changes it to use either DW_EH_PE_indirect (for global) or DW_EH_PE_datarel (for local), and fixes libgcc so it can find the address of the GOT as the base address for DW_EH_PE_datarel. Complicating matters somewhat, GAS was missing support for %gotoff(symbol) relocation syntax. I have just pushed a fix for that, but I've added a configure check to test for presence of the binutils support and fall back to the current absolute encoding (which works most of the time) if it is not available. Once the fix makes it into an official binutils release it might be appropriate to make this error out instead. Since this is a wrong-code bug and affects only nios2 target, I think this is appropriate for Stage 4. I regression-tested on both nios2-linux-gnu and nios2-elf, with and without the binutils support present, before committing this. 2020-01-31 Sandra Loosemore <sandra@codesourcery.com> gcc/ * configure.ac [nios2-*-*]: Check HAVE_AS_NIOS2_GOTOFF_RELOCATION. * config.in: Regenerated. * configure: Regenerated. * config/nios2/nios2.h (ASM_PREFERRED_EH_DATA_FORMAT): Fix handling for PIC when HAVE_AS_NIOS2_GOTOFF_RELOCATION. (ASM_MAYBE_OUTPUT_ENCODED_ADDR_RTX): New. gcc/testsuite/ * g++.target/nios2/hello-pie.C: New. * g++.target/nios2/nios2.exp: New. libgcc/ * config.host [nios2-*-linux*] (tmake_file, tm_file): Adjust. * config/nios2-elf-lib.h: New. * unwind-dw2-fde-dip.c (_Unwind_IteratePhdrCallback): Use existing code for finding GOT base for nios2.
2020-02-01Fixes after recent configure changes relating to static librariesAndrew Burgess1-6/+23
This commit: commit e7c26e04b2dd6266d62d5a5825ff7eb44d1cf14e (tjteru/master) Date: Wed Jan 22 14:54:26 2020 +0000 gcc: Add new configure options to allow static libraries to be selected contains a couple of issues. First I failed to correctly regenerate all of the configure files it should have done. Second, there was a mistake in lib-link.m4, one of the conditions didn't use pure sh syntax, I wrote this: if x$lib_type = xauto || x$lib_type = xshared; then When I should have written this: if test "x$lib_type" = "xauto" || test "x$lib_type" = "xshared"; then These issues were raised on the mailing list in these messages: https://gcc.gnu.org/ml/gcc-patches/2020-01/msg01827.html https://gcc.gnu.org/ml/gcc-patches/2020-01/msg01921.html config/ChangeLog: * lib-link.m4 (AC_LIB_LINKFLAGS_BODY): Update shell syntax. gcc/ChangeLog: * configure: Regenerate. intl/ChangeLog: * configure: Regenerate. libcpp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate.
2020-01-30Regenerate configure for 54b3d52Dragan Mladjenovic1-2/+19
Commit 54b3d52 ("Emit .note.GNU-stack for hard-float linux targets.") was missing generated files. Add them now. gcc/ChangeLog: 2020-01-30 Dragan Mladjenovic <dmladjenovic@wavecomp.com> * config.in: Regenerated. * configure: Regenerated.
2020-01-14Initial commit of analyzerDavid Malcolm1-3/+22
This patch adds a static analysis pass to the middle-end, focusing for this release on C code, and malloc/free issues in particular. See: https://gcc.gnu.org/wiki/DavidMalcolm/StaticAnalyzer gcc/ChangeLog: * Makefile.in (lang_opt_files): Add analyzer.opt. (ANALYZER_OBJS): New. (OBJS): Add digraph.o, graphviz.o, ordered-hash-map-tests.o, tristate.o and ANALYZER_OBJS. (TEXI_GCCINT_FILES): Add analyzer.texi. * common.opt (-fanalyzer): New driver option. * config.in: Regenerate. * configure: Regenerate. * configure.ac (--disable-analyzer, ENABLE_ANALYZER): New option. (gccdepdir): Also create depdir for "analyzer" subdir. * digraph.cc: New file. * digraph.h: New file. * doc/analyzer.texi: New file. * doc/gccint.texi ("Static Analyzer") New menu item. (analyzer.texi): Include it. * doc/invoke.texi ("Static Analyzer Options"): New list and new section. ("Warning Options"): Add static analysis warnings to the list. (-Wno-analyzer-double-fclose): New option. (-Wno-analyzer-double-free): New option. (-Wno-analyzer-exposure-through-output-file): New option. (-Wno-analyzer-file-leak): New option. (-Wno-analyzer-free-of-non-heap): New option. (-Wno-analyzer-malloc-leak): New option. (-Wno-analyzer-possible-null-argument): New option. (-Wno-analyzer-possible-null-dereference): New option. (-Wno-analyzer-null-argument): New option. (-Wno-analyzer-null-dereference): New option. (-Wno-analyzer-stale-setjmp-buffer): New option. (-Wno-analyzer-tainted-array-index): New option. (-Wno-analyzer-use-after-free): New option. (-Wno-analyzer-use-of-pointer-in-stale-stack-frame): New option. (-Wno-analyzer-use-of-uninitialized-value): New option. (-Wanalyzer-too-complex): New option. (-fanalyzer-call-summaries): New warning. (-fanalyzer-checker=): New warning. (-fanalyzer-fine-grained): New warning. (-fno-analyzer-state-merge): New warning. (-fno-analyzer-state-purge): New warning. (-fanalyzer-transitivity): New warning. (-fanalyzer-verbose-edges): New warning. (-fanalyzer-verbose-state-changes): New warning. (-fanalyzer-verbosity=): New warning. (-fdump-analyzer): New warning. (-fdump-analyzer-callgraph): New warning. (-fdump-analyzer-exploded-graph): New warning. (-fdump-analyzer-exploded-nodes): New warning. (-fdump-analyzer-exploded-nodes-2): New warning. (-fdump-analyzer-exploded-nodes-3): New warning. (-fdump-analyzer-supergraph): New warning. * doc/sourcebuild.texi (dg-require-dot): New. (dg-check-dot): New. * gdbinit.in (break-on-saved-diagnostic): New command. * graphviz.cc: New file. * graphviz.h: New file. * ordered-hash-map-tests.cc: New file. * ordered-hash-map.h: New file. * passes.def (pass_analyzer): Add before pass_ipa_whole_program_visibility. * selftest-run-tests.c (selftest::run_tests): Call selftest::ordered_hash_map_tests_cc_tests. * selftest.h (selftest::ordered_hash_map_tests_cc_tests): New decl. * shortest-paths.h: New file. * timevar.def (TV_ANALYZER): New timevar. (TV_ANALYZER_SUPERGRAPH): Likewise. (TV_ANALYZER_STATE_PURGE): Likewise. (TV_ANALYZER_PLAN): Likewise. (TV_ANALYZER_SCC): Likewise. (TV_ANALYZER_WORKLIST): Likewise. (TV_ANALYZER_DUMP): Likewise. (TV_ANALYZER_DIAGNOSTICS): Likewise. (TV_ANALYZER_SHORTEST_PATHS): Likewise. * tree-pass.h (make_pass_analyzer): New decl. * tristate.cc: New file. * tristate.h: New file. gcc/analyzer/ChangeLog: * ChangeLog: New file. * analyzer-selftests.cc: New file. * analyzer-selftests.h: New file. * analyzer.opt: New file. * analysis-plan.cc: New file. * analysis-plan.h: New file. * analyzer-logging.cc: New file. * analyzer-logging.h: New file. * analyzer-pass.cc: New file. * analyzer.cc: New file. * analyzer.h: New file. * call-string.cc: New file. * call-string.h: New file. * checker-path.cc: New file. * checker-path.h: New file. * constraint-manager.cc: New file. * constraint-manager.h: New file. * diagnostic-manager.cc: New file. * diagnostic-manager.h: New file. * engine.cc: New file. * engine.h: New file. * exploded-graph.h: New file. * pending-diagnostic.cc: New file. * pending-diagnostic.h: New file. * program-point.cc: New file. * program-point.h: New file. * program-state.cc: New file. * program-state.h: New file. * region-model.cc: New file. * region-model.h: New file. * sm-file.cc: New file. * sm-malloc.cc: New file. * sm-malloc.dot: New file. * sm-pattern-test.cc: New file. * sm-sensitive.cc: New file. * sm-signal.cc: New file. * sm-taint.cc: New file. * sm.cc: New file. * sm.h: New file. * state-purge.cc: New file. * state-purge.h: New file. * supergraph.cc: New file. * supergraph.h: New file. gcc/testsuite/ChangeLog: * gcc.dg/analyzer/CVE-2005-1689-minimal.c: New test. * gcc.dg/analyzer/abort.c: New test. * gcc.dg/analyzer/alloca-leak.c: New test. * gcc.dg/analyzer/analyzer-decls.h: New header. * gcc.dg/analyzer/analyzer-verbosity-0.c: New test. * gcc.dg/analyzer/analyzer-verbosity-1.c: New test. * gcc.dg/analyzer/analyzer-verbosity-2.c: New test. * gcc.dg/analyzer/analyzer.exp: New suite. * gcc.dg/analyzer/attribute-nonnull.c: New test. * gcc.dg/analyzer/call-summaries-1.c: New test. * gcc.dg/analyzer/conditionals-2.c: New test. * gcc.dg/analyzer/conditionals-3.c: New test. * gcc.dg/analyzer/conditionals-notrans.c: New test. * gcc.dg/analyzer/conditionals-trans.c: New test. * gcc.dg/analyzer/data-model-1.c: New test. * gcc.dg/analyzer/data-model-2.c: New test. * gcc.dg/analyzer/data-model-3.c: New test. * gcc.dg/analyzer/data-model-4.c: New test. * gcc.dg/analyzer/data-model-5.c: New test. * gcc.dg/analyzer/data-model-5b.c: New test. * gcc.dg/analyzer/data-model-5c.c: New test. * gcc.dg/analyzer/data-model-5d.c: New test. * gcc.dg/analyzer/data-model-6.c: New test. * gcc.dg/analyzer/data-model-7.c: New test. * gcc.dg/analyzer/data-model-8.c: New test. * gcc.dg/analyzer/data-model-9.c: New test. * gcc.dg/analyzer/data-model-11.c: New test. * gcc.dg/analyzer/data-model-12.c: New test. * gcc.dg/analyzer/data-model-13.c: New test. * gcc.dg/analyzer/data-model-14.c: New test. * gcc.dg/analyzer/data-model-15.c: New test. * gcc.dg/analyzer/data-model-16.c: New test. * gcc.dg/analyzer/data-model-17.c: New test. * gcc.dg/analyzer/data-model-18.c: New test. * gcc.dg/analyzer/data-model-19.c: New test. * gcc.dg/analyzer/data-model-path-1.c: New test. * gcc.dg/analyzer/disabling.c: New test. * gcc.dg/analyzer/dot-output.c: New test. * gcc.dg/analyzer/double-free-lto-1-a.c: New test. * gcc.dg/analyzer/double-free-lto-1-b.c: New test. * gcc.dg/analyzer/double-free-lto-1.h: New header. * gcc.dg/analyzer/equivalence.c: New test. * gcc.dg/analyzer/explode-1.c: New test. * gcc.dg/analyzer/explode-2.c: New test. * gcc.dg/analyzer/factorial.c: New test. * gcc.dg/analyzer/fibonacci.c: New test. * gcc.dg/analyzer/fields.c: New test. * gcc.dg/analyzer/file-1.c: New test. * gcc.dg/analyzer/file-2.c: New test. * gcc.dg/analyzer/function-ptr-1.c: New test. * gcc.dg/analyzer/function-ptr-2.c: New test. * gcc.dg/analyzer/function-ptr-3.c: New test. * gcc.dg/analyzer/gzio-2.c: New test. * gcc.dg/analyzer/gzio-3.c: New test. * gcc.dg/analyzer/gzio-3a.c: New test. * gcc.dg/analyzer/gzio.c: New test. * gcc.dg/analyzer/infinite-recursion.c: New test. * gcc.dg/analyzer/loop-2.c: New test. * gcc.dg/analyzer/loop-2a.c: New test. * gcc.dg/analyzer/loop-3.c: New test. * gcc.dg/analyzer/loop-4.c: New test. * gcc.dg/analyzer/loop.c: New test. * gcc.dg/analyzer/malloc-1.c: New test. * gcc.dg/analyzer/malloc-2.c: New test. * gcc.dg/analyzer/malloc-3.c: New test. * gcc.dg/analyzer/malloc-callbacks.c: New test. * gcc.dg/analyzer/malloc-dce.c: New test. * gcc.dg/analyzer/malloc-dedupe-1.c: New test. * gcc.dg/analyzer/malloc-ipa-1.c: New test. * gcc.dg/analyzer/malloc-ipa-10.c: New test. * gcc.dg/analyzer/malloc-ipa-11.c: New test. * gcc.dg/analyzer/malloc-ipa-12.c: New test. * gcc.dg/analyzer/malloc-ipa-13.c: New test. * gcc.dg/analyzer/malloc-ipa-2.c: New test. * gcc.dg/analyzer/malloc-ipa-3.c: New test. * gcc.dg/analyzer/malloc-ipa-4.c: New test. * gcc.dg/analyzer/malloc-ipa-5.c: New test. * gcc.dg/analyzer/malloc-ipa-6.c: New test. * gcc.dg/analyzer/malloc-ipa-7.c: New test. * gcc.dg/analyzer/malloc-ipa-8-double-free.c: New test. * gcc.dg/analyzer/malloc-ipa-8-lto-a.c: New test. * gcc.dg/analyzer/malloc-ipa-8-lto-b.c: New test. * gcc.dg/analyzer/malloc-ipa-8-lto-c.c: New test. * gcc.dg/analyzer/malloc-ipa-8-lto.h: New test. * gcc.dg/analyzer/malloc-ipa-8-unchecked.c: New test. * gcc.dg/analyzer/malloc-ipa-9.c: New test. * gcc.dg/analyzer/malloc-macro-inline-events.c: New test. * gcc.dg/analyzer/malloc-macro-separate-events.c: New test. * gcc.dg/analyzer/malloc-macro.h: New header. * gcc.dg/analyzer/malloc-many-paths-1.c: New test. * gcc.dg/analyzer/malloc-many-paths-2.c: New test. * gcc.dg/analyzer/malloc-many-paths-3.c: New test. * gcc.dg/analyzer/malloc-paths-1.c: New test. * gcc.dg/analyzer/malloc-paths-10.c: New test. * gcc.dg/analyzer/malloc-paths-2.c: New test. * gcc.dg/analyzer/malloc-paths-3.c: New test. * gcc.dg/analyzer/malloc-paths-4.c: New test. * gcc.dg/analyzer/malloc-paths-5.c: New test. * gcc.dg/analyzer/malloc-paths-6.c: New test. * gcc.dg/analyzer/malloc-paths-7.c: New test. * gcc.dg/analyzer/malloc-paths-8.c: New test. * gcc.dg/analyzer/malloc-paths-9.c: New test. * gcc.dg/analyzer/malloc-vs-local-1a.c: New test. * gcc.dg/analyzer/malloc-vs-local-1b.c: New test. * gcc.dg/analyzer/malloc-vs-local-2.c: New test. * gcc.dg/analyzer/malloc-vs-local-3.c: New test. * gcc.dg/analyzer/malloc-vs-local-4.c: New test. * gcc.dg/analyzer/operations.c: New test. * gcc.dg/analyzer/params-2.c: New test. * gcc.dg/analyzer/params.c: New test. * gcc.dg/analyzer/paths-1.c: New test. * gcc.dg/analyzer/paths-1a.c: New test. * gcc.dg/analyzer/paths-2.c: New test. * gcc.dg/analyzer/paths-3.c: New test. * gcc.dg/analyzer/paths-4.c: New test. * gcc.dg/analyzer/paths-5.c: New test. * gcc.dg/analyzer/paths-6.c: New test. * gcc.dg/analyzer/paths-7.c: New test. * gcc.dg/analyzer/pattern-test-1.c: New test. * gcc.dg/analyzer/pattern-test-2.c: New test. * gcc.dg/analyzer/pointer-merging.c: New test. * gcc.dg/analyzer/pr61861.c: New test. * gcc.dg/analyzer/pragma-1.c: New test. * gcc.dg/analyzer/scope-1.c: New test. * gcc.dg/analyzer/sensitive-1.c: New test. * gcc.dg/analyzer/setjmp-1.c: New test. * gcc.dg/analyzer/setjmp-2.c: New test. * gcc.dg/analyzer/setjmp-3.c: New test. * gcc.dg/analyzer/setjmp-4.c: New test. * gcc.dg/analyzer/setjmp-5.c: New test. * gcc.dg/analyzer/setjmp-6.c: New test. * gcc.dg/analyzer/setjmp-7.c: New test. * gcc.dg/analyzer/setjmp-7a.c: New test. * gcc.dg/analyzer/setjmp-8.c: New test. * gcc.dg/analyzer/setjmp-9.c: New test. * gcc.dg/analyzer/signal-1.c: New test. * gcc.dg/analyzer/signal-2.c: New test. * gcc.dg/analyzer/signal-3.c: New test. * gcc.dg/analyzer/signal-4a.c: New test. * gcc.dg/analyzer/signal-4b.c: New test. * gcc.dg/analyzer/strcmp-1.c: New test. * gcc.dg/analyzer/switch.c: New test. * gcc.dg/analyzer/taint-1.c: New test. * gcc.dg/analyzer/zlib-1.c: New test. * gcc.dg/analyzer/zlib-2.c: New test. * gcc.dg/analyzer/zlib-3.c: New test. * gcc.dg/analyzer/zlib-4.c: New test. * gcc.dg/analyzer/zlib-5.c: New test. * gcc.dg/analyzer/zlib-6.c: New test. * lib/gcc-defs.exp (dg-check-dot): New procedure. * lib/target-supports.exp (check_dot_available): New procedure. (check_effective_target_analyzer): New. * lib/target-supports-dg.exp (dg-require-dot): New procedure.
2019-11-20Switch gcc ftp URL's to httpsJanne Blomqvist1-1/+1
The FTP protocol is getting long in the tooth, and we should emphasize HTTPS where that is available. This patch changes various gcc.gnu.org URL's to instead use HTTPS. For instance, kernel.org shut down FTP access in 2017, with the explanation: - The protocol is inefficient and requires adding awkward kludges to firewalls and load-balancing daemons - FTP servers have no support for caching or accelerators, which has significant performance impacts - Most software implementations have stagnated and see infrequent updates ChangeLog: 2019-11-20 Janne Blomqvist <jb@gcc.gnu.org> * configure.ac: Use https for gcc.gnu.org. * configure: Regenerated. gcc/ChangeLog: 2019-11-20 Janne Blomqvist <jb@gcc.gnu.org> * configure.ac: Use https for gcc.gnu.org. * configure: Regenerated. * doc/install.texi: Use https for gcc.gnu.org. * doc/sourcebuild.texi: Likewise. gcc/testsuite/ChangeLog: 2019-11-20 Janne Blomqvist <jb@gcc.gnu.org> * README: Use https for gcc.gnu.org. libstdc++-v3/ChangeLog: 2019-11-20 Janne Blomqvist <jb@gcc.gnu.org> * doc/html/api.html: Use https for gcc.gnu.org. * doc/xml/api.xml: Likewise. maintainer-scripts/ChangeLog: 2019-11-20 Janne Blomqvist <jb@gcc.gnu.org> * gcc_release: Use https for gcc.gnu.org. From-SVN: r278526
2019-11-18musl: use correct long double abi by defaultSzabolcs Nagy1-0/+13
On powerpc and s390x the musl ABI requires 64 bit and 128 bit long double respectively, so adjust the default. gcc/ChangeLog: 2019-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * configure.ac (gcc_cv_target_ldbl128): Set for powerpc*-*-linux-musl* and s390*-*-linux-musl* targets. * configure: Regenerate. From-SVN: r278398
2019-11-12[RS6000] Remove TARGET_TLS_MARKERS and require binutils 2.20Alan Modra1-36/+0
This patch removes !TARGET_TLS_MARKERS support. -mtls-markers (and -mno-tls-markers) disappear as valid options too, because I figure they haven't been used too much except by people testing the compiler. * config/rs6000/rs6000.opt (mtls-markers): Delete. * config/rs6000/rs6000.h (TARGET_TLS_MARKERS): Don't define. (IS_NOMARK_TLSGETADDR): Likewise. * config/rs6000/rs6000-protos.h (rs6000_output_tlsargs): Delete. * config/rs6000/rs6000.c (rs6000_output_tlsargs): Delete. (rs6000_legitimize_tls_address): Remove !TARGET_TLS_MARKERS code. (rs6000_call_template_1): Delete TARGET_TLS_MARKERS test and allow other UNSPECs besides UNSPEC_TLSGD and UNSPEC_TLSLD. (rs6000_indirect_call_template_1): Likewise. (rs6000_pltseq_template): Likewise. (rs6000_opt_vars): Remove "tls-markers" entry. * config/rs6000/rs6000.md (tls_gd<bits>): Replace TARGET_TLS_MARKERS with TARGET_ELF. (tls_gd_high<bits>, tls_gd_low<bits>): Likewise. (tls_ld<bits>, tls_ld_high<bits>, tls_ld_low<bits>): Likewise. (pltseq_plt_pcrel<mode>): Likewise. (call_value_local32): Remove IS_NOMARK_TLSGETADDR predicate test. (call_value_local64): Likewise. (call_value_indirect_nonlocal_sysv<mode>): Remove IS_NOMARK_TLSGETADDR output and length attribute sub-expression. (call_value_nonlocal_sysv<mode>), (call_value_nonlocal_sysv_secure<mode>), (call_value_local_aix<mode>, call_value_nonlocal_aix<mode>), (call_value_indirect_aix<mode>, call_value_indirect_elfv2<mode>), (call_value_indirect_pcrel<mode>): Likewise. * doc/install.texi (powerpc-*-*): Require binutils-2.20. * configure.ac (HAVE_AS_TLS_MARKERS): Delete test. * configure: Regenerate. * config.in: Regenerate. From-SVN: r278075
2019-11-11[build] Properly track GCC language configure fragmentsThomas Schwinge1-3/+7
The 'gcc/configure' script sources all 'gcc/*/config-lang.in' files, but fails to emit such dependency information into the build machinery. That means, currently, when something gets changed in a 'gcc/*/config-lang.in' file, this is not noticed, and doesn't propagate through the build machinery. Handling of configure fragments is modelled in the same way as it already exists for Makefile fragments. gcc/ * Makefile.in (LANG_CONFIGUREFRAGS): Define. (config.status): Use/depend on it. * configure.ac (all_lang_configurefrags): Track, 'AC_SUBST'. * configure: Regenerate. From-SVN: r278035
2019-11-04Add gcc/config/gcn/t-omp-device for OpenMP declare variant kind/arch/isaTobias Burnus1-2/+6
gcc/ * config/gcn/gcn.c (gcn_omp_device_kind_arch_isa): New function. (TARGET_OMP_DEVICE_KIND_ARCH_ISA): Redefine to gcn_omp_device_kind_arch_isa. * config/gcn/t-omp-device: New file. * configure.ac: Support gcn for omp_device_property. * configure: Regenerate. From-SVN: r277797
2019-11-04pass --enable-obsolete down to gcc/configure for auto-build.hAlexandre Oliva1-3/+10
Configuring GCC for obsolete targets works as long as build = host. When it isn't, --enable-obsolete is not passed down to the additional build configure started by gcc/configure, used to generate auto-build.h. The build configure fails and we end up without a auto-build.h, but the host configure proceeds, so we only get a fatal failure much later, when make realizes auto-build.h is not there and there's no rule to create it. This patch gets the host configure to fail when the build configure does, leaving the temporary build configure dir behind for investigation. It also arranges for --eanble-obsolete to be passed down to the build configure. Alas, the latter triggered a warning in the build configure because --enable-obsolete is not a recognized configure option. That's not reported in the host configure because of the --disable-option-checking passed by the top-level configure, so I arranged for that to be passed down to the build configure as well. Finally, since my initial suspicion when investigating this failure was that auto-build.h had been removed after configuration and there was no rule to rebuild it, I'm adding rules to gcc/Makefile to get it created or updated as needed. Since it is configure that creates it, as run by e.g. config.status --recheck, and config.status is created after auto-build.h, I've made config.status depend on auto-build.h, and added a dummy rule to create auto-build.h. This would normally not be enough to create a header when needed, but since Makefile depends on config.status, and make first updates Makefile, it ends up working, as long as nothing else that Makefile depends on requires auto-build.h but not config.status. The config.status dependency and the auto-build.h rule are only enabled in the cases in which auto-build.h is actually used, namely when build != host. for gcc/ChangeLog * configure.ac: Pass --enable-obsolete=* and --enable-option-checking=* down to build configure, and fail if it fails. AC_SUBST HAVE_AUTO_BUILD. * configure: Rebuild. * Makefile.in [HAVE_AUTO_BUILD] (auto-build.h): New rule. [HAVE_AUTO_BUILD] (config.status): Depend on auto-build.h. From-SVN: r277777
2019-11-04MSP430: Add -mtiny-printf optionJozef Lawrynowicz1-2/+23
2019-11-04 Jozef Lawrynowicz <jozef.l@mittosystems.com> gcc/ * config.in: Regenerate. * config/msp430/msp430.c (msp430_option_override): Emit an error if -mtiny-printf is used without GCC being configured with --enable-newlib-nano-formatted-io. * config/msp430/msp430.h (LINK_SPEC): Pass "--wrap puts --wrap printf" when -mtiny-printf is used. * config/msp430/msp430.opt: Document -mtiny-printf. * configure: Regenerate. * configure.ac: Enable --enable-newlib-nano-formatted-io flag. Define HAVE_NEWLIB_NANO_FORMATTED_IO if --enable-newlib-nano-formatted-io is passed. * doc/invoke.texi: Document -mtiny-printf. gcc/testsuite/ * gcc.target/msp430/tiny-printf.c: New test. From-SVN: r277774
2019-11-04Regenerate gcc/configureJozef Lawrynowicz1-20/+8
From-SVN: r277773
2019-11-03config.in: Regenerate.Jan Hubicka1-9/+76
* config.in: Regenerate. * configure: Regenerate. * configure.ac: Check for mallinfo. * ggc-common.c: Include malloc.h if available; include options.h (report_heap_memory_use): New functoin. * ggc-page.c (ggc_grow): Do not print "start". * ggc.h (report_heap_memory_use): Declare. * pases.c (execute_one_pass): Report memory after IPA passes. (ipa_read_summaries_1): Likewise. (ipa_read_optimization_summaries_1): Likewise. * lto/lto-common.c (read_cgraph_and_symbols): Improve -Q reporting. * lto.c (lto_wpa_write_files): Likewise. From-SVN: r277753
2019-11-02re PR bootstrap/92314 (missing omp-device-properties', needed by ↵Jakub Jelinek1-9/+13
's-omp-device-properties-h') PR bootstrap/92314 * configure.ac: Don't look for omp-device-properties files from installed offloading compilers. Instead add tmake_file snippets for configured offloading targets and use files they generate. * Makefile.in (install): Don't depend on install-omp-device-properties. (install-omp-device-properties): Remove goal. * config/i386/t-omp-device: New file. * config/i386/t-intelmic (omp-device-properties): Remove goal. * config/nvptx/t-omp-device: New file. * config/nvptx/t-nvptx (omp-device-properties): Remove goal. * configure: Regenerated. From-SVN: r277735
2019-10-31configure.ac: Compute and substitute omp_device_properties and ↵Jakub Jelinek1-2/+15
omp_device_property_deps. * configure.ac: Compute and substitute omp_device_properties and omp_device_property_deps. * Makefile.in (generated_files): Add omp-device-properties.h. (omp-general.o): Depend on omp-device-properties.h. (omp_device_properties): New make variable. (omp-device-properties.h, s-omp-device-properties-h, install-omp-device-properties): New goals. (install): Depend on install-omp-device-properties for accelerators. * target.def (TARGET_OMP_DEVICE_KIND_ARCH_ISA): New target hook. * target.h (enum omp_device_kind_arch_isa): New enum. * doc/tm.texi.in: Add placeholder for TARGET_OMP_DEVICE_KIND_ARCH_ISA documentation. * omp-general.c: Include omp-device-properties.h. (omp_max_simt_vf): Expect OFFLOAD_TARGET_NAMES to be separated by colon instead of comma. (omp_offload_device_kind_arch_isa, omp_maybe_offloaded): New functions. (omp_context_selector_matches): Implement device set arch/isa selectors, improve device set kind selector handling. * config/i386/i386-options.h (ix86_omp_device_kind_arch_isa): Declare. * config/i386/i386.c (TARGET_SIMD_CLONE_ADJUST, TARGET_SIMD_CLONE_USABLE): Formatting fix. (TARGET_OMP_DEVICE_KIND_ARCH_ISA): Redefine to ix86_omp_device_kind_arch_isa. * config/i386/i386-options.c (struct ix86_target_opts): Move type definition from ix86_target_string to file scope. (isa2_opts, isa_opts): Moved arrays from ix86_target_string function to file scope. (ix86_omp_device_kind_arch_isa): New function. (ix86_target_string): Moved struct ix86_target_opts, isa2_opts and isa_opts definitions to file scope. * config/i386/t-intelmic (omp-device-properties): New goal. * config/nvptx/t-nvptx (omp-device-properties): Likewise. * config/nvptx/nvptx.c (nvptx_omp_device_kind_arch_isa): New function. (TARGET_OMP_DEVICE_KIND_ARCH_ISA): Redefine to nvptx_omp_device_kind_arch_isa. * configure: Regenerate. * doc/tm.texi: Regenerate. testsuite/ * c-c++-common/gomp/declare-variant-9.c: New test. * c-c++-common/gomp/declare-variant-10.c: New test. From-SVN: r277662
2019-10-10Documentation hyperlinks for [-Wname-of-option] (PR 87488)David Malcolm1-2/+23
This patch uses the support for pretty-printing escaped URLs added in the previous patch (PR 87488) so that in a sufficiently capable terminal the [-Wname-of-option] emitted at the end of each diagnostic becomes a hyperlink to the documentation for that option on the GCC website. I've tested it with Fedora 30's GNOME Terminal (3.32.2 with VTE 0.56.3); the option text is printed with a dotted underline, hovering shows the URL, and on right-clicking it offers menu items to visit/copy the URL. gcc/ChangeLog: PR 87488 * Makefile.in (CFLAGS-opts.o): Pass in DOCUMENTATION_ROOT_URL via -D. * configure.ac (--with-documentation-root-url): New option. * configure: Regenerate. * diagnostic-format-json.cc (json_end_diagnostic): If there is an option URL, add it as a new string field of the diagnostic option. * diagnostic.c (diagnostic_initialize): Initialize get_option_url. (print_option_information): If get_option_url is non-NULL, call it, and if the result is non-NULL, potentially emit an escape sequence to markup the option text with the resulting URL. * diagnostic.h (diagnostic_context::get_option_url): New callback. * doc/invoke.texi (-fdiagnostics-format=): Add "option_url" to example of JSON output. * opts-diagnostic.h (get_option_url): New decl. * opts.c (get_option_url): New function. * toplev.c (general_init): Initialize the get_option_url callback. gcc/testsuite/ChangeLog: PR 87488 * c-c++-common/diagnostic-format-json-2.c: Expect an "option_url" field. * c-c++-common/diagnostic-format-json-3.c: Likewise. * gfortran.dg/diagnostic-format-json-2.F90: Likewise. * gfortran.dg/diagnostic-format-json-3.F90: Likewise. * jit.dg/test-error-array-bounds.c (create_code): Ensure that error messages don't contain escaped URLs. From-SVN: r276843
2019-10-07MSP430: Don't generate 430X insns when handling data in the lower memory regionJozef Lawrynowicz1-0/+74
gcc/ChangeLog: 2019-10-07 Jozef Lawrynowicz <jozef.l@mittosystems.com> * config.in: Regenerate. * config/msp430/constraints.md: Fix docstring for "Ys" constraint. Add new "Yx" constraint. * config/msp430/driver-msp430.c (msp430_propagate_region_opt): New spec function. * config/msp430/msp430-protos.h (msp430_op_not_in_high_mem): New prototype. * config/msp430/msp430.c (msp430_option_override): Allow the lower code/data region to be selected in the small memory model. (msp430_section_attr): Don't warn if the "section" and "lower" attributes are used together. (msp430_handle_generic_attribute): Likewise. (msp430_var_in_low_mem): New function. (TARGET_ENCODE_SECTION_INFO): Define. (msp430_encode_section_info): New function. (gen_prefix): Return early in the small memory model. Require TARGET_USE_LOWER_REGION_PREFIX to be set before adding the ".lower" prefix if -m{code,data}-region=lower have been passed. (msp430_output_aligned_decl_common): Emit common symbols when -mdata-region=lower is passed unless TARGET_USE_LOWER_REGION_PREFIX is set. (TARGET_ASM_FILE_END): Define. (msp430_file_end): New function. (msp430_do_not_relax_short_jumps): Allow relaxation when function will be in the lower region. (msp430_op_not_in_high_mem): New function. (msp430_print_operand): Check "msp430_op_not_in_high_mem" for the 'X' operand selector. Clarify comment for 'x' operand selector. * config/msp430/msp430.h (LINK_SPEC): Propagate -m{code,data}-region to the linker via spec function msp430_propagate_region_opt. (msp430_propagate_region_opt): New prototype. (EXTRA_SPEC_FUNCTIONS): Add msp430_propagate_region_opt. (SYMBOL_FLAG_LOW_MEM): Define. * config/msp430/msp430.md (addsipsi3): Add missing "%X" operand selector. (zero_extendqihi2): Fix operand number used by "%X" selector. (zero_extendqisi2): Likewise. (zero_extendhisi2): Likewise. (movqi): Use "Yx" constraint in place of "%X" operand selector. (movhi): Likewise. (addqi3): Likewise. (addhi3): Likewise. (addsi3): Likewise. (addhi3_cy): Likewise. (addchi4_cy): Likewise. (subqi3): Likewise. (subhi3): Likewise. (subsi3): Likewise. (bic<mode>3): Likewise. (and<mode>3): Likewise. (ior<mode>3): Likewise. (xor<mode>3): Likewise. (slli_1): Add missing "%X" operand selector. (slll_1): Likewise. (slll_2): Likewise. (srai_1): Likewise. (sral_1): Likewise. (sral_2): Likewise. (srli_1): Likewise. (srll_1): Likewise. (cbranchqi4_real): Use "Yx" constraint in place of "%X" operand selector. (cbranchhi4_real): Likewise. (cbranchqi4_reversed): Likewise. (cbranchhi4_reversed): Likewise. (*bitbranch<mode>4): Likewise. (*bitbranch<mode>4_z): Remove unnecessary "%x" operand selector. * config/msp430/msp430.opt (mcode-region=): Set default to MSP430_REGION_LOWER. Improve docstring. (mdata-region=): Likewise. (muse-lower-region-prefix): New option. * config/msp430/t-msp430 (MULTILIB_OPTIONS): Add mdata-region=none multilib. (MULTILIB_MATCHES): Set mdata-region={upper,either} to match mdata-region=none multilib. MULTILIB_EXCEPTIONS: Remove. MULTILIB_REQUIRED: Define. * configure: Regenerate. * configure.ac: Define HAVE_AS_GNU_ATTRIBUTE and HAVE_AS_MSPABI_ATTRIBUTE if GAS version >= 2.33.50. * doc/extend.texi: Clarify comment for {upper,lower,either} function attributes. Add separate description for "lower" variable attribute. gcc/testsuite/ChangeLog: 2019-10-07 Jozef Lawrynowicz <jozef.l@mittosystems.com> * gcc.target/msp430/430x-insns.c: New test. * gcc.target/msp430/data-attributes-2.c: Remove dg-warning directives for conflicts between the "section" and "lower" attributes. * gcc.target/msp430/msp430.exp (check_effective_target_msp430_region_not_lower): New. (check_effective_target_msp430_region_lower): New. * gcc.target/msp430/object-attributes-430.c: New test. * gcc.target/msp430/object-attributes-default.c: New test. * gcc.target/msp430/object-attributes-mlarge-any-region.c: New test. * gcc.target/msp430/object-attributes-mlarge.c: New test. From-SVN: r276665
2019-10-01libada: Remove racy duplicate gnatlib installationMaciej W. Rozycki1-2/+13
For some reason, presumably historical, the `install-gnatlib' target for the default multilib is invoked twice, once via the `ada.install-common' target in `gcc/ada/gcc-interface/Make-lang.in' invoked from gcc/ and again via the `install-libada' target in libada/. Apart from doing the same twice this is actually harmful in sufficiently parallelized `make' invocation, as the removal of old files performed within the `install-gnatlib' recipe in the former case actually races with the installation of new files done in the latter case, causing the recipe to fail and abort, however non-fatally, having not completed the installation of all the built files needed for the newly-built compiler to work correctly. This can be observed with a native `x86_64-linux-gnu' bootstrap: make[4]: Entering directory '.../gcc/ada' rm -rf .../lib/gcc/x86_64-linux-gnu/10.0.0/adalib rm: cannot remove '.../lib/gcc/x86_64-linux-gnu/10.0.0/adalib': Directory not empty make[4]: *** [gcc-interface/Makefile:512: install-gnatlib] Error 1 make[4]: Leaving directory '.../gcc/ada' make[3]: *** [.../gcc/ada/gcc-interface/Make-lang.in:853: install-gnatlib] Error 2 make[2]: [.../gcc/ada/gcc-interface/Make-lang.in:829: ada.install-common] Error 2 (ignored) which then causes missing files to be reported when an attempt is made to use the newly-installed non-functional compiler to build a `riscv-linux-gnu' cross-compiler: (cd ada/bldtools/sinfo; gnatmake -q xsinfo ; ./xsinfo sinfo.h ) error: "ada.ali" not found, "ada.ads" must be compiled error: "s-memory.ali" not found, "s-memory.adb" must be compiled gnatmake: *** bind failed. /bin/sh: ./xsinfo: No such file or directory make[2]: *** [.../gcc/ada/Make-generated.in:45: ada/sinfo.h] Error 127 make[2]: Leaving directory '.../gcc' make[1]: *** [Makefile:4369: all-gcc] Error 2 make[1]: Leaving directory '...' make: *** [Makefile:965: all] Error 2 Depending on timing `.../lib/gcc/x86_64-linux-gnu/10.0.0/adainclude' may cause an installation failure instead and the resulting compiler may be non-functional in a different way. Only invoke `install-gnatlib' from within gcc/ then if a legacy build process is being used with libada disabled and gnatlib built manually with `make -C gcc gnatlib'. gcc/ * Makefile.in (gnat_install_lib): New variable. * configure.ac: Substitute it. * configure: Regenerate. gcc/ada/ * gcc-interface/Make-lang.in (ada.install-common): Split into... (gnat-install-tools, gnat-install-lib): ... these. From-SVN: r276422
2019-09-27Regenerate `configure' scripts for `uclinuxfdpiceabi' libtool.m4 updateMaciej W. Rozycki1-6/+16
A change made with r275564 ("[ARM/FDPIC v6 02/24] [ARM] FDPIC: Handle arm*-*-uclinuxfdpiceabi in configure scripts") to libtool.m4 has not regenerated all the `configure' scripts affected. Fix it. gcc/ * configure: Regenerate. libatomic/ * configure: Regenerate. libbacktrace/ * configure: Regenerate. libcc1/ * configure: Regenerate. libffi/ * configure: Regenerate. libgfortran/ * configure: Regenerate. libgomp/ * configure: Regenerate. libhsail-rt/ * configure: Regenerate. libitm/ * configure: Regenerate. libobjc/ * configure: Regenerate. liboffloadmic/ * configure: Regenerate. libphobos/ * configure: Regenerate. libquadmath/ * configure: Regenerate. libsanitizer/ * configure: Regenerate. libssp/ * configure: Regenerate. libstdc++-v3/ * configure: Regenerate. libvtv/ * configure: Regenerate. lto-plugin/ * configure: Regenerate. zlib/ * configure: Regenerate. From-SVN: r276213
2019-09-03Remove Cell Broadband Engine SPU targetsUlrich Weigand1-1/+1
From-SVN: r275343
2019-07-03Add zstd support for LTO bytecode compression.Martin Liska1-2/+161
2019-07-03 Martin Liska <mliska@suse.cz> * Makefile.in: Define ZSTD_LIB. * common.opt: Adjust compression level to support also zstd levels. * config.in: Regenerate. * configure: Likewise. * configure.ac: Add --with-zstd and --with-zstd-include options and detect ZSTD. * doc/install.texi: Mention zstd dependency. * gcc.c: Print supported LTO compression algorithms. * lto-compress.c (lto_normalized_zstd_level): Likewise. (lto_compression_zstd): Likewise. (lto_uncompression_zstd): Likewise. (lto_end_compression): Dispatch in between zlib and zstd. (lto_compression_zlib): Mark with ATTRIBUTE_UNUSED. (lto_uncompression_zlib): Make it static. * lto-compress.h (lto_end_uncompression): Fix GNU coding style. * lto-section-in.c (lto_get_section_data): Pass info about used compression. * lto-streamer-out.c: By default use zstd when possible. * timevar.def (TV_IPA_LTO_DECOMPRESS): Rename to decompression (TV_IPA_LTO_COMPRESS): Likewise for compression. From-SVN: r272996
2019-06-17Remove support for alternative Solaris 11.4 ld -V outputRainer Orth1-6/+2
* configure.ac (ld_vers) <*-*-solaris2*>: Remove support for alternative Solaris 11.4 format. * configure: Regenerate. From-SVN: r272377
2019-06-06* configure: Regenerate.Jakub Jelinek1-1/+1
From-SVN: r271994
2019-06-05c-decl.c (start_decl): Adjust quoting and hyphenation in diagnostics.Martin Sebor1-2/+2
gcc/c/ChangeLog: * c-decl.c (start_decl): Adjust quoting and hyphenation in diagnostics. (finish_decl): Same. (finish_enum): Same. (start_function): Same. (declspecs_add_type): Same. * c-parser.c (warn_for_abs): Same. * c-typeck.c (build_binary_op): Same. gcc/c-family/ChangeLog: * c-attribs.c (handle_mode_attribute): Adjust quoting and hyphenation. (handle_alias_ifunc_attribute): Same. (handle_copy_attribute): Same. (handle_weakref_attribute): Same. (handle_nonnull_attribute): Same. * c-warn.c (warn_for_sign_compare): Same. (warn_for_restrict): Same. * c.opt: Same. gcc/cp/ChangeLog: * call.c (build_conditional_expr_1): Adjust quoting and hyphenation. (convert_like_real): Same. (convert_arg_to_ellipsis): Same. * constexpr.c (diag_array_subscript): Same. * constraint.cc (diagnose_trait_expression): Same. * cvt.c (ocp_convert): Same. * decl.c (start_decl): Same. (check_for_uninitialized_const_var): Same. (grokfndecl): Same. (check_special_function_return_type): Same. (finish_enum_value_list): Same. (start_preparsed_function): Same. * parser.c (cp_parser_decl_specifier_seq): Same. * typeck.c (cp_build_binary_op): Same. (build_static_cast_1): Same. gcc/lto/ChangeLog: * lto-common.c (lto_file_finalize): Adjust quoting and hyphenation. gcc/objc/ChangeLog: * objc-act.c (objc_build_setter_call): Adjust quoting and hyphenation. * objc-encoding.c (encode_gnu_bitfield): Same. gcc/ChangeLog: * config/i386/i386-features.c (ix86_get_function_versions_dispatcher): Adjust quoting and hyphenation. * convert.c (convert_to_real_1): Same. * gcc.c (driver_wrong_lang_callback): Same. (driver::handle_unrecognized_options): Same. * gimple-ssa-nonnull-compare.c (do_warn_nonnull_compare): Same. * opts-common.c (cmdline_handle_error): Same. (read_cmdline_option): Same. * opts-global.c (complain_wrong_lang): Same. (print_ignored_options): Same. (handle_common_deferred_options): Same. * pretty-print.h: Same. * print-rtl.c (debug_bb_n_slim): Same. * sched-rgn.c (make_pass_sched_fusion): Same. * tree-cfg.c (verify_gimple_assign_unary): Same. (verify_gimple_label): Same. * tree-ssa-operands.c (verify_ssa_operands): Same. * varasm.c (do_assemble_alias): Same. (assemble_alias): Same. From-SVN: r271971
2019-05-14Remove obsolete Solaris 10 supportRainer Orth1-23/+4
libstdc++-v3: * config/os/solaris/solaris2.10: Move to ... * config/os/solaris: ... this. * configure.host (os_include_dir): Adapt. (abi_baseline_pair): Remove Solaris 10 handling. * config/abi/post/i386-solaris2.10: Remove. * config/abi/post/sparc-solaris2.10: Remove. * config/abi/post/i386-solaris2.11: Rename to ... * config/abi/post/i386-solaris: ... this. * config/abi/post/sparc-solaris2.11: Rename to ... * config/abi/post/sparc-solaris: ... this. * libsupc++/new_opa.cc [_GLIBCXX_HAVE_MEMALIGN] [__sun]: Remove workaround. * testsuite/ext/enc_filebuf/char/13598.cc: Remove *-*-solaris2.10 xfail. libsanitizer: * configure.ac (have_dl_iterate_phdr): Remove *-*-solaris2.10* handling. * configure: Regenerate. libgcc: * config.host: Simplify various *-*-solaris2.1[0-9]* to *-*-solaris2*. * configure.ac: Likewise. * configure: Regenerate. * config/i386/sol2-unwind.h (x86_fallback_frame_state): Remove Solaris 10 and Solaris 11 < snv_125 handling. libbacktrace: * configure.ac (have_dl_iterate_phdr): Remove *-*-solaris2.10* handling. * configure: Regenerate. gcc/testsuite: * gcc.dg/atomic/c11-atomic-exec-4.c: Simplify triplet to *-*-solaris2*. * gcc.dg/atomic/c11-atomic-exec-5.c: Likewise. * gcc.dg/c99-math-double-1.c: Likewise. * gcc.dg/c99-math-float-1.c: Likewise. * gcc.dg/c99-math-long-double-1.c: Likewise. * gcc.misc-tests/linkage.exp: Simplify triplet to x86_64-*-solaris2*. * gcc.target/i386/mcount_pic.c: Remove *-*-solaris2.10* && !gld xfail. * gcc.target/i386/pr63620.c: Likewise. * lib/target-supports.exp (check_sse_os_support_available): Remove Solaris 9/x86 workaround. gcc: * config.gcc: Move *-*-solaris2.10* from obsolete configurations to unsupported ones. Simplify x86_64-*-solaris2.1[0-9]* to x86_64-*-solaris2*. * config.host: Likewise. * config/i386/sol2.h (ASM_COMMENT_START): Remove. * config/sparc/driver-sparc.c (host_detect_local_cpu) [__sun__ && __svr4__]: Remove "brand" fallback. [!KSTAT_DATA_STRING]: Remove. * configure.ac (gcc_cv_ld_hidden): Simplify *-*-solaris2.1[0-9]* to *-*-solaris2*. (comdat_group): Likewise. (set_have_as_tls): Likewise. (gcc_cv_target_dl_iterate_phdr): Likewise. (gcc_cv_as_shf_merge): Remove Solaris 10/x86 workaround. (gcc_cv_ld_aligned_shf_merge): Remove Solaris 10/SPARC workaround. * configure: Regenerate. * doc/install.texi: Simplify Solaris target triplets. (Specific, i?86-*-solaris2*): Remove Solaris 10 references. (Specific, *-*-solaris2*): Document Solaris 10 removal. Remove Solaris 10 references. Remove obsolete Solaris bug reference. (Specific, sparc-sun-solaris2.10): Remove. From-SVN: r271183
2019-05-13re PR target/89221 (--enable-frame-pointer does not work as intended)Uros Bizjak1-1/+1
PR target/89221 * configure.ac (--enable-frame-pointer): Disable by default for cygwin and mingw. * configure: Regenerate. From-SVN: r271129
2019-05-09[PR89221] Continue to default to '--disable-frame-pointer' for x86 GNU systemsThomas Schwinge1-2/+2
The recent trunk r270914 for PR89221 "--enable-frame-pointer does not work as intended" fixed a scripting defect in the x86 '--enable-frame-pointer' handling. This has the side effect that, for example, for '--target=i686-gnu' this is now enabled by default: 'USE_IX86_FRAME_POINTER=1' is added to 'tm_defines'. Given that it's highly unlikely that anyone would now suddenly want '--enable-frame-pointer' as the default for any kind of GNU system, I'm changing the default back for GNU systems, to match that of a 'target_os' of 'linux* | darwin[8912]*'. gcc/ PR target/89221 * configure.ac (--enable-frame-pointer): Disable by default for GNU systems. * configure: Regenerate. From-SVN: r271028
2019-05-06re PR target/89221 (--enable-frame-pointer does not work as intended)Uros Bizjak1-6/+15
PR target/89221 * config.gcc (i[34567]86-*-*, x86_64-*-*): Move tests for enable_cld and enable_frame_pointer ... * configure.ac: ... here. Update help strings for --enable-frame-pointer. * configure: Regenerate. * config/i386/i386-options.c (ix86_option_override_internal): Remove USE_X86_64_FRAME_POINTER define, use USE_IX86_FRAME_POINTER instead. * config/i386/sol2.h (USE_IX86_FRAME_POINTER): Remove. (USE_X86_64_FRAME_POINTER): Ditto. From-SVN: r270914
2019-04-15[NDS32] Provide one valid nds32 assembly instruction to check assembler ↵Chung-Ju Wu1-1/+1
debugging options and features. gcc/ * configure: Add nds32 target for dwarf2 debug_line checking. * configure.ac: Regenerated. From-SVN: r270359
2019-03-01RISC-V: Generalize -march support, add ELF attribute support.Kito Cheng1-0/+37
Kito Cheng <kito.cheng@gmail.com> Monk Chiang <sh.chiang04@gmail.com> gcc/ * common/config/riscv/riscv-common.c: Include sstream. (riscv_subset_list::to_string): New. (riscv_arch_str): Likewise. * config.gcc (riscv*-*-*): Handle --with-riscv-attribute= * config.in: Regen. * config/riscv/riscv-protos.h (riscv_arch_str): New. * config/riscv/riscv.c (INCLUDE_STRING): Defined. (riscv_emit_attribute): New. (riscv_file_start): Emit attribute if needed. (riscv_option_override): Init riscv_emit_attribute_p. * config/riscv/riscv.opt (mriscv-attribute): New option. * configure.ac (riscv*-*-*): Check binutils is supporting ELF * configure: Regen. * doc/install.texi: Document --with-riscv-attribute. * doc/invoke.texi: Document -mriscv-attribute. * common/config/riscv/riscv-common.c: Include config/riscv/riscv-protos.h. (INCLUDE_STRING): Defined. (RISCV_DONT_CARE_VERSION): Defined. (riscv_subset_t): Declare. (riscv_subset_t::riscv_subset_t): New. (riscv_subset_list): Declare. (riscv_subset_list::riscv_subset_list): New. (riscv_subset_list::~riscv_subset_list): Likewise. (riscv_subset_list::parsing_subset_version): Likewise. (riscv_subset_list::parse_std_ext): Likewise. (riscv_subset_list::parse_sv_or_non_std_ext): Likewise. (riscv_subset_list::add): Likewise. (riscv_subset_list::lookup): Likewise. (riscv_subset_list::xlen): Likewise. (riscv_subset_list::parse): Likewise. (riscv_supported_std_ext): Likewise. (current_subset_list): Likewise. (riscv_parse_arch_string): Using riscv_subset_list::parse to parse. gcc/testsuite/ * gcc.target/riscv/attribute-1.c: New. * gcc.target/riscv/attribute-2.c: Likewise. * gcc.target/riscv/attribute-3.c: Likewise. * gcc.target/riscv/attribute-4.c: Likewise. * gcc.target/riscv/attribute-5.c: Likewise. * gcc.target/riscv/attribute-6.c: Likewise. * gcc.target/riscv/attribute-7.c: Likewise. * gcc.target/riscv/attribute-8.c: Likewise. * gcc.target/riscv/attribute-9.c: Likewise. * gcc.target/riscv/arch-1.c: New. * gcc.target/riscv/arch-2.c: Likewise. * gcc.target/riscv/arch-3.c: Likewise. * gcc.target/riscv/arch-4.c: Likewise. Co-Authored-By: Monk Chiang <sh.chiang04@gmail.com> From-SVN: r269337
2019-02-11Restore .init_array etc. detection on 64-bit SolarisRainer Orth1-9/+9
* acinclude.m4 (gcc_AC_INITFINI_ARRAY): Use 8-byte strings with Solaris ld. * configure: Regenerate. From-SVN: r268768
2019-01-17GCN back-end configAndrew Stubbs1-2/+66
This patch contains the configuration adjustments needed to enable the GCN back-end. The new configure check for dlopen is required to allow building the new gcn-run tool. This tool uses libdl to load the HSA runtime libraries, which are required to run programs on the GPU. The tool is disabled if libdl is not available. 2019-01-17 Andrew Stubbs <ams@codesourcery.com> Kwok Cheung Yeung <kcy@codesourcery.com> Julian Brown <julian@codesourcery.com> Tom de Vries <tom@codesourcery.com> Jan Hubicka <hubicka@ucw.cz> Martin Jambor <mjambor@suse.cz> * configure.ac: Likewise. * configure: Regenerate. * contrib/config-list.mk: Add amdgcn-amdhsa. gcc/ * config.gcc: Add amdgcn*-*-amdhsa configuration. * configure.ac: Check for dlopen. * configure: Regenerate. Co-Authored-By: Jan Hubicka <hubicka@ucw.cz> Co-Authored-By: Julian Brown <julian@codesourcery.com> Co-Authored-By: Kwok Cheung Yeung <kcy@codesourcery.com> Co-Authored-By: Martin Jambor <mjambor@suse.cz> Co-Authored-By: Tom de Vries <tom@codesourcery.com> From-SVN: r268024
2019-01-09[AArch64, 6/6] Enable BTI: Add configure option.Sudakshina Das1-0/+28
This patch is part of a series that enables ARMv8.5-A in GCC and adds Branch Target Identification Mechanism. This patch is adding a new configure option for enabling BTI and Return Address Signing by default. *** gcc/ChangeLog *** 2018-01-09 Sudakshina Das <sudi.das@arm.com> * config/aarch64/aarch64.c (aarch64_override_options): Add case to check configure option to set BTI and Return Address Signing. * configure.ac: Add --enable-standard-branch-protection and --disable-standard-branch-protection. * configure: Regenerated. * doc/install.texi: Document the same. *** gcc/testsuite/ChangeLog *** 2018-01-09 Sudakshina Das <sudi.das@arm.com> * gcc.target/aarch64/bti-1.c: Update test to not add command line option when configure with bti. * gcc.target/aarch64/bti-2.c: Likewise. * lib/target-supports.exp (check_effective_target_default_branch_protection): Add configure check for --enable-standard-branch-protection. From-SVN: r267770
generated by cgit v1.1 at 2025-08-06 20:16:12 +0000