aboutsummaryrefslogtreecommitdiff
path: root/gcc/config/mmix
AgeCommit message (Collapse)AuthorFilesLines
2022-01-03Update copyright years.Jakub Jelinek9-9/+9
2021-07-30MMIX: remove generic placeholders parameters in call insn patterns.Hans-Peter Nilsson2-43/+33
I guess the best way to describe these operands, at least for MMIX, is "ballast". Some targets seem to drag along one or two of the incoming pattern operands through the rtl passes and not dropping them until assembly output. Let's stop doing that for MMIX. There really are *two* unused parameters: one is a number corresponding to the stack-size of arguments as a const_int and the other is whatever the target yields for targetm.calls.function_arg (args_so_far, function_arg_info::end_marker ()). There's a mandatory second argument to the "call" RTX, but the target doesn't have to keep it a variable number; it can be replaced by (const_int 0) early, like this. Astute readers may object that as the MMIX call-type insns (PUSHJ, PUSHGO) have a parameter in addition to the address of the called function, so should the emitted RTL. But, that parameter depends only on the local function, not the called function (IOW, it's the same for all calls in a function), and its value isn't known until frame layout time. Having it a parameter in the emitted RTL for the call would just be confusing. (Maybe this will be amended later, if/when improving "shrink-wrapping".) gcc: * config/mmix/mmix.md ("call", "call_value", "*call_real") ("*call_value_real"): Don't generate rtx mentioning the generic operands 1 and 2 to "call", and similarly for "call_value". * config/mmix/mmix.c (mmix_print_operand_punct_valid_p) (mmix_print_operand): Use '!' instead of 'p'.
2021-07-30doc: correct documentation of "call" (et al) operand 2.Hans-Peter Nilsson1-9/+3
An old itch being scratched: the documentation lies; it's not "the number of registers used as operands", unless the target makes a special arrangement to that effect, and there's nothing in the guts of gcc setting up or assuming those semantics. Instead, see calls.c:expand_call, variable next_arg_reg. Or just consider the variable name. The text is somewhat transcribed from the head comment of emit_call_1 for parameter next_arg_reg. Most important is to document the relation to function_arg_info::end_marker() and the TARGET_FUNCTION_ARG hook. The "normally" in the head comment, in "normally it is the first arg-register beyond those used for args in this call, or 0 if all the arg-registers are used in this call" means "by default", unless the target tests end_marker_p and does something special, but the port is free to return whatever it likes when it sees the end-marker. And, I do mean "whatever it likes" because if the port doesn't actually mention that operand in the RTX emitted for its "call" or "call_value" patterns ("usually" define_expands), it can be any mumbo-jumbo, such as a VOIDmode register, which seems like it happens for some targets, or NULL, that happens for others. Returning a VOIDmode register until recently included MMIX, where it made it into the emitted RTL, confusing later passes, recently exposed as an ICE. Tested by inspecting the info and generated pdf for sanity. gcc: * doc/md.texi (call): Correct information about operand 2. * config/mmix/mmix.md ("call", "call_value"): Remove fixed FIXMEs.
2021-07-30Fix MMIX breakage; ICE in df_ref_record, at df-scan.c:2598Hans-Peter Nilsson1-3/+10
This bug made me dive into some of the murkier waters of gcc, namely the source of operand 2 to the "call" pattern. It can be pretty poisonous, but is unused (either directly or later) by most targets. The target function_arg (and function_incoming_arg), can unless specially handled, cause a VOIDmode reg RTX to be generated, for the function arguments end-marker. This is then passed on by expand_call to the target "call" pattern, as operand[2] (which is wrongly documented or wrongly implemented, see comment in mmix.c) but unused by most targets that do not handle it specially, as in operand 2 not making it into the insn generated for the "call" (et al) patterns. Of course, the MMIX port stands out here: the RTX makes it into the generated RTX but is then actually unused and is just a placeholder; see mmix_print_operand 'p'. Anyway, df-scan inspects the emitted call rtx and horks on the void-mode RTX (actually: that it represents a zero-sized register range) from r12-1702. While I could replace or remove the emitted unused call insn operand, that would still leave unusable rtx to future users of function_arg actually looking for next_arg_reg. Better replace VOIDmode with DImode here; that's the "natural" mode of MMIX registers. (As a future improvement, I'll also remove the placeholder argument and replace the intended user; the print_operand output modifier 'p' modifier (as in "PUSHJ $%p2,%0") with some punctuation, perhaps '!' (as in "PUSHJ $%!,%0"). I inspected all ports, but other targets emit a special function_arg_info::end_marker cookie or just don't emit "call" operand[2] (etc) in the expanded "call" pattern. gcc: * config/mmix/mmix.c (mmix_function_arg_1): Avoid generating a VOIDmode register for e.g the function_arg_info::end_marker.
2021-01-04Update copyright years.Jakub Jelinek9-9/+9
2020-12-16opts: Remove all usages of Report keyword.Martin Liska1-17/+17
gcc/brig/ChangeLog: * lang.opt: Remove usage of Report. gcc/c-family/ChangeLog: * c.opt: Remove usage of Report. gcc/ChangeLog: * common.opt: Remove usage of Report. * config/aarch64/aarch64.opt: Ditto. * config/alpha/alpha.opt: Ditto. * config/arc/arc.opt: Ditto. * config/arm/arm.opt: Ditto. * config/avr/avr.opt: Ditto. * config/bfin/bfin.opt: Ditto. * config/bpf/bpf.opt: Ditto. * config/c6x/c6x.opt: Ditto. * config/cr16/cr16.opt: Ditto. * config/cris/cris.opt: Ditto. * config/cris/elf.opt: Ditto. * config/csky/csky.opt: Ditto. * config/darwin.opt: Ditto. * config/fr30/fr30.opt: Ditto. * config/frv/frv.opt: Ditto. * config/ft32/ft32.opt: Ditto. * config/gcn/gcn.opt: Ditto. * config/i386/cygming.opt: Ditto. * config/i386/i386.opt: Ditto. * config/ia64/ia64.opt: Ditto. * config/ia64/ilp32.opt: Ditto. * config/linux-android.opt: Ditto. * config/linux.opt: Ditto. * config/lm32/lm32.opt: Ditto. * config/m32r/m32r.opt: Ditto. * config/m68k/m68k.opt: Ditto. * config/mcore/mcore.opt: Ditto. * config/microblaze/microblaze.opt: Ditto. * config/mips/mips.opt: Ditto. * config/mmix/mmix.opt: Ditto. * config/mn10300/mn10300.opt: Ditto. * config/moxie/moxie.opt: Ditto. * config/msp430/msp430.opt: Ditto. * config/nds32/nds32.opt: Ditto. * config/nios2/elf.opt: Ditto. * config/nios2/nios2.opt: Ditto. * config/nvptx/nvptx.opt: Ditto. * config/pa/pa.opt: Ditto. * config/pdp11/pdp11.opt: Ditto. * config/pru/pru.opt: Ditto. * config/riscv/riscv.opt: Ditto. * config/rl78/rl78.opt: Ditto. * config/rs6000/aix64.opt: Ditto. * config/rs6000/linux64.opt: Ditto. * config/rs6000/rs6000.opt: Ditto. * config/rs6000/sysv4.opt: Ditto. * config/rx/elf.opt: Ditto. * config/rx/rx.opt: Ditto. * config/s390/s390.opt: Ditto. * config/s390/tpf.opt: Ditto. * config/sh/sh.opt: Ditto. * config/sol2.opt: Ditto. * config/sparc/long-double-switch.opt: Ditto. * config/sparc/sparc.opt: Ditto. * config/tilegx/tilegx.opt: Ditto. * config/tilepro/tilepro.opt: Ditto. * config/v850/v850.opt: Ditto. * config/visium/visium.opt: Ditto. * config/vms/vms.opt: Ditto. * config/vxworks.opt: Ditto. * config/xtensa/xtensa.opt: Ditto. gcc/lto/ChangeLog: * lang.opt: Remove usage of Report.
2020-08-07mmix: fix gcc.dg/loop-9.c by more accurate move insnsHans-Peter Nilsson1-12/+36
It looks like gcc.dg/loop-9.c kind-of works as sentinel for sane move-instruction generation for a port. Looking at the FAIL: gcc.dg/loop-9.c scan-rtl-dump loop2_invariant "Decided" FAIL: gcc.dg/loop-9.c scan-rtl-dump loop2_invariant "without introducing a new temporary register" it seems the problem is that in the loop: for (i = 0; i < 100; i++) a[i] = 18.4242; the move insn corresponding to "a[i] = 18.4242" happens to be generated as a move of a constant to a memory address, using no registers except for the address (edited): (insn 9 8 10 3 (set (mem:DF (reg:DI 269 [ ivtmp::9 ])) (const_double:DF 1.84241999e+1)) "x/loop-9.c":9:10 6 {movdf}) To wit, at the loop2 pass there's no register-initialization to move out of the loop! The insn above isn't accurate and has to be fixed up at register allocation time to make constraints match. While there are insns to set memory to constant in MMIX, that's limited to 64-bit moves corresponding to the integer bit-patterns for 0..255, and 18.4242 isn't one of them. (Only 0.0 matches; the bit-patterns for 0..255 would IIUC be interpreted as denormal floating-point numbers a.k.a. subnormal numbers and don't seem worthwhile to handle.) The fault is with the port, for not requiring a register for an operand that actually requires an intermediate register, in order to enable pre-register-allocation passes to do their job. The movdf pattern (actually, all MMIX movM), only required the destination to be a non-immediate operand and the source to be a general_operand, i.e. anything-to-anything. Better force the source to be a register, when asked to generate such a move insn. Also, make operands stay sane by using the matching insn condition to require one of the operands to be a register pre-register-allocation (for sake of combine-like passes that cook up "simplified" insns, possibly losing the use of a register). Looking no deeper than at the results of test-runs with different variants, I see that the latter "safety latch" has no effect on the test-results (at 919c9d4bd3db7da0), but it just feels like the right thing to do. Similarly, there's no effect on test-suite results, to do the same not just for movdf but for all moves. gcc: * config/mmix/mmix.md (MM): New mode_iterator. ("mov<mode>"): New expander to expand for all MM-modes. ("*movqi_expanded", "*movhi_expanded", "*movsi_expanded") ("*movsf_expanded", "*movdf_expanded"): Rename from the corresponding mov<M> named pattern. Add to the condition that either operand must be a register_operand. ("*movdi_expanded"): Similar, but also allow STCO in the condition.
2020-07-29config/mmix/mmix.h (NO_FUNCTION_CSE): Define to 1.Hans-Peter Nilsson1-0/+3
The tests gcc.dg/tree-ssa/loop-1.c and gcc.dg/weak/typeof-2.c assume this setting and are as a consequence riddled with exceptions for targets that actually do yield better code when calling through a register rather than repeatedly the same symbol. Nonetheless, defining it makes sense for MMIX. (Even better IMHO, this macro shouldn't exist and instead rtx costs be used or perhaps just a target-specific default of flag_no_function_cse.) gcc: * config/mmix/mmix.h (NO_FUNCTION_CSE): Define to 1.
2020-07-29mmix.h (ASM_OUTPUT_EXTERNAL): Define to default_elf_asm_output_external.Hans-Peter Nilsson1-0/+5
Whoops. When un-disabling visibility support for mmix, I missed that some of the newly enabled tests were FAILs, for not emitting .hidden for references to external declarations. This takes care of gcc.dg/visibility-14.c .. -19.c, and gcc.dg/visibility-23.c. gcc: * config/mmix/mmix.h (ASM_OUTPUT_EXTERNAL): Define to default_elf_asm_output_external.
2020-07-25config/mmix/mmix.c (TARGET_ASM_OUTPUT_IDENT): Override.Hans-Peter Nilsson1-0/+3
Funny that default_asm_output_ident_directive isn't the default... Anyway, since dot-pseudos like .ident are treated as comments by mmixal, there's nothing lost compatibilitywise by supporting it. If mmix-knuth-mmixware had included elfos.h this'd have been the default. There might be enough reason to do that; relocatable objects are ELF but (by default) links to produce mmo. Fixes c-c++-common/ident-1b.c and 2b in C and C++ testing. Committed. gcc: * config/mmix/mmix.c (TARGET_ASM_OUTPUT_IDENT): Override the default with default_asm_output_ident_directive.
2020-07-21mmix: support -fstack-usageHans-Peter Nilsson1-0/+16
MMIX has two stacks; the regular one using register $254 as a convention and the register-stack, pushed and popped by call instructions (usually). The decision to only report the stack usage of the regular stack (and not of the register stack) may be updated, perhaps the sum is better. This initial decision is helped a little bit by the order of passes: the size of the register-stack is calculated only later (in the machine-dependent reorg pass), long after finalization of the stack-usage info (in the prologue/epilogue pass). No regressions for mmix-knuth-mmixware (but a whole lot more PASSes), committed. gcc: * config/mmix/mmix.c (mmix_expand_prologue): Calculate the total allocated size and set current_function_static_stack_size, if flag_stack_usage_info.
2020-07-20mmix: When debug-dump, revert to "standard" pseudos for emitting integersHans-Peter Nilsson1-4/+31
The sole purpose of not providing pseudos and forcing use of TARGET_ASM_INTEGER is to arrange for assembly output that people can, instead of using gas, usefullt feed to mmixal (Knuth's assembler). It uses pseudos with slightly different semantics (BYTE, WYDE, TETRA, OCTA). Nice when it works, but that only happens for limited use-cases and debug-information is excluded. The dwarf2out.c shortcuts, looking up the pseudo-strings and doing the output on its own, has the result that in absence of such integer-emitting pseudos, the target TARGET_ASM_INTEGER hook is called, which by definition outputs a newline, and then the dwarf2out.c code redundantly adds another. That uglifies output and breaks the expectations of the dwarf2 parts of the test-suite. The wart by which an extra newline is emitted is ripe for a cleanup, and I started out thinking I'd add a default argument for emitting a newline to the assemble_integer family of functions, but then reconsidered. I also can't bring myself to use different pseudos with/without -g so instead I check for options for the more detailed dumps, as used by the test-suite to get those DW_* strings in detailed assembly output. This eliminates all FAILs in the dwarf2-specific parts of the gcc test-suite for mmix-knuth-mmixware, with no regressions. Committed. gcc: * config/mmix/mmix.c (mmix_option_override): Reinstate default integer-emitting targetm.asm_out pseudos when dumping detailed assembly-code. (mmix_assemble_integer): Update comment.
2020-01-01Update copyright years.Jakub Jelinek9-9/+9
From-SVN: r279813
2019-09-10Add call_used_or_fixed_reg_pRichard Sandiford1-8/+9
Similarly to the call_used_or_fixed_regs patch, this one replaces tests of call_used_regs[i] with call_used_or_fixed_reg_p (i). The only remaining direct uses of call_used_regs are in reginfo.c and in the conditional register usage hooks. Again, this is purely mechanical. A later patch will clear up the oddities in config/ code. 2019-09-10 Richard Sandiford <richard.sandiford@arm.com> gcc/ * hard-reg-set.h (call_used_or_fixed_reg_p): New macro. * cfgloopanal.c (init_set_costs): Use call_used_or_fixed_reg_p instead of testing call_used_regs directly. * config/aarch64/aarch64.c (aarch64_layout_frame): Likewise. (aarch64_components_for_bb): Likewise. * config/alpha/alpha.c (alpha_compute_frame_layout): Likewise. * config/arc/arc.c (arc_must_save_register): Likewise. (arc_epilogue_uses): Likewise. * config/arm/arm.c (arm_option_override, use_return_insn): Likewise. (legitimize_pic_address, callee_saved_reg_p): Likewise. (arm_compute_save_reg0_reg12_mask): Likewise. (arm_compute_save_core_reg_mask): Likewise. (arm_get_vfp_saved_size, arm_compute_frame_layout): Likewise. (arm_save_coproc_regs, thumb1_extra_regs_pushed): Likewise. (cmse_nonsecure_entry_clear_before_return): Likewise. (thumb1_expand_epilogue, arm_expand_epilogue_apcs_frame): Likewise. (arm_expand_epilogue): Likewise. * config/avr/avr.c (avr_regs_to_save, sequent_regs_live): Likewise. (avr_function_arg_advance, avr_find_unused_d_reg): Likewise. (_reg_unused_after): Likewise. * config/bfin/bfin.c (must_save_p, expand_prologue_reg_save): Likewise. (expand_epilogue_reg_restore, n_regs_saved_by_prologue): Likewise. (add_to_reg, hwloop_optimize): Likewise. * config/bpf/bpf.c (bpf_compute_frame_layout, bpf_expand_prologue) (bpf_expand_epilogue): Likewise. * config/c6x/c6x.c (c6x_save_reg, c6x_regno_reg_class): Likewise. * config/cr16/cr16.c (cr16_compute_save_regs): Likewise. * config/cris/cris.c (cris_reg_saved_in_regsave_area): Likewise. * config/epiphany/epiphany.c (epiphany_init_reg_tables): Likewise. (epiphany_compute_function_type, MUST_SAVE_REGISTER): Likewise. (epiphany_output_mi_thunk, epiphany_start_function): Likewise. * config/fr30/fr30.c (fr30_num_arg_regs): Likewise. * config/frv/frv.c (frv_stack_info): Likewise. * config/ft32/ft32.c (ft32_compute_frame): Likewise. (ft32_expand_prologue, ft32_expand_epilogue): Likewise. * config/gcn/gcn.c (gcn_compute_frame_offsets): Likewise. (move_callee_saved_registers): Likewise. * config/h8300/h8300.c (byte_reg): Likewise. * config/i386/i386-options.c (ix86_set_current_function): Likewise. * config/i386/i386.c (ix86_save_reg, ix86_expand_prologue): Likewise. (ix86_expand_epilogue, x86_order_regs_for_local_alloc): Likewise. * config/i386/predicates.md (sibcall_memory_operand): Likewise. * config/ia64/ia64.c (emit_safe_across_calls, find_gr_spill): Likewise. (next_scratch_gr_reg, ia64_compute_frame_size): Likewise. * config/iq2000/iq2000.h (MUST_SAVE_REGISTER): Likewise. * config/lm32/lm32.c (lm32_compute_frame_size): Likewise. * config/m32c/m32c.c (need_to_save): Likewise. * config/m68k/m68k.c (m68k_save_reg): Likewise. * config/mcore/mcore.c (calc_live_regs): Likewise. * config/microblaze/microblaze.c (microblaze_must_save_register): Likewise. * config/mmix/mmix.c (mmix_local_regno): Likewise. (mmix_initial_elimination_offset, mmix_reorg): Likewise. (mmix_use_simple_return, mmix_expand_prologue): Likewise. (mmix_expand_epilogue): Likewise. * config/moxie/moxie.c (moxie_compute_frame): Likewise. (moxie_expand_prologue, moxie_expand_epilogue): Likewise. * config/msp430/msp430.c (msp430_preserve_reg_p): Likewise. * config/nds32/nds32.h (nds32_16bit_address_type): Likewise. (NDS32_REQUIRED_CALLEE_SAVED_P): Likewise. * config/nios2/nios2.c (prologue_saved_reg_p): Likewise. * config/or1k/or1k.c (callee_saved_regno_p): Likewise. * config/pa/pa.c (pa_expand_prologue, pa_expand_epilogue): Likewise. * config/pdp11/pdp11.c (pdp11_saved_regno): Likewise. * config/pru/pru.c (prologue_saved_reg_p): Likewise. * config/riscv/riscv.c (riscv_save_reg_p): Likewise. (riscv_epilogue_uses, riscv_hard_regno_mode_ok): Likewise. * config/rl78/rl78.c (need_to_save): Likewise. * config/rs6000/rs6000-logue.c (save_reg_p): Likewise. (rs6000_stack_info, generate_set_vrsave): Likewise. (rs6000_emit_prologue, rs6000_emit_epilogue): Likewise. * config/rs6000/rs6000.c (rs6000_debug_reg_print): Likewise. * config/rx/rx.c (rx_get_stack_layout): Likewise. * config/s390/s390.c (s390_call_saved_register_used): Likewise. * config/sh/sh.c (calc_live_regs, sh_output_mi_thunk): Likewise. * config/sparc/sparc.c (save_global_or_fp_reg_p): Likewise. (save_local_or_in_reg_p): Likewise. * config/stormy16/stormy16.c (REG_NEEDS_SAVE): Likewise. (xstormy16_epilogue_uses): Likewise. * config/tilegx/tilegx.c (need_to_save_reg): Likewise. * config/tilepro/tilepro.c (need_to_save_reg): Likewise. * config/v850/v850.c (compute_register_save_size): Likewise. * config/vax/vax.c (vax_expand_prologue): Likewise. * config/visium/visium.c (visium_save_reg_p): Likewise. * config/xtensa/xtensa.c (xtensa_call_save_reg): Likewise. * cselib.c (cselib_process_insn): Likewise. * df-scan.c (df_get_entry_block_def_set): Likewise. * function.c (aggregate_value_p): Likewise. * haifa-sched.c (alloc_global_sched_pressure_data): Likewise. * ira-lives.c (process_bb_node_lives): Likewise. * ira.c (do_reload): Likewise. * lra-lives.c (process_bb_lives): Likewise. * lra-remat.c (lra_remat): Likewise. * lra.c (lra): Likewise. * postreload.c (reload_combine_recognize_pattern): Likewise. (reload_cse_move2add): Likewise. * recog.c (peep2_find_free_register): Likewise. * regrename.c (check_new_reg_p): Likewise. * reload.c (find_equiv_reg): Likewise. * reload1.c (reload, find_reg): Likewise. * sel-sched.c (init_hard_regs_data): Likewise. From-SVN: r275602
2019-08-20Use function_arg_info for TARGET_MUST_PASS_IN_STACKRichard Sandiford1-3/+3
The hook is passed the promoted mode instead of the original type mode. The expr.h reference in the documentation is no longer correct, but pointing to calls.h or calls.c doesn't help much either. I just left this as-is since it's not related to the point of the series. After previous changes, most places already pass arg.mode and arg.type. Only i386 and mcore needed to construct a new one out of nothing. rs6000 needs to construct one slightly earlier than before. 2019-08-20 Richard Sandiford <richard.sandiford@arm.com> gcc/ * target.def (must_pass_in_stack): Take a function_arg_info instead of a mode and a type. * doc/tm.texi: Regenerate. * calls.h (must_pass_in_stack_var_size): Take a function_arg_info instead of a mode and a type. (must_pass_in_stack_var_size_or_pad): Likewise. * calls.c (must_pass_in_stack_var_size): Likewise. (must_pass_in_stack_var_size_or_pad): Likewise. (initialize_argument_information): Update call to targetm.calls.must_pass_in_stack. (must_pass_va_arg_on_stack): Likewise. * function.c (assign_parm_find_entry_rtl): Likewise. * targhooks.c (hook_pass_by_reference_must_pass_in_stack): Likewise. * config/alpha/alpha.c (alpha_function_arg): Likewise. (alpha_function_arg_advance): Likewise. * config/cr16/cr16.c (cr16_function_arg): Likewise. (cr16_function_arg_advance): Likewise. * config/cris/cris.c (cris_pass_by_reference): Likewise. (cris_arg_partial_bytes): Likewise. * config/iq2000/iq2000.c (iq2000_pass_by_reference): Likewise. * config/lm32/lm32.c (lm32_function_arg): Likewise. * config/mcore/mcore.c (mcore_num_arg_regs): Likewise. (mcore_function_arg, mcore_arg_partial_bytes): Likewise. * config/mips/mips.c (mips_pass_by_reference): Likewise. * config/mmix/mmix.c (mmix_function_arg_advance): Likewise. (mmix_function_arg_1, mmix_pass_by_reference): Likewise. * config/sh/sh.c (sh_pass_by_reference): Likewise. * config/stormy16/stormy16.c (xstormy16_function_arg): Likewise. * config/xtensa/xtensa.c (xtensa_function_arg_advance): Likewise. * config/arm/arm.c (arm_must_pass_in_stack): Take a function_arg_info instead of a mode and a type. * config/fr30/fr30.c (fr30_must_pass_in_stack): Likewise. (fr30_num_arg_regs): Likewise. (fr30_setup_incoming_varargs): Update calls accordingly. (fr30_arg_partial_bytes, fr30_function_arg): Likewise. (fr30_function_arg_advance): Likewise. * config/frv/frv.c (frv_must_pass_in_stack): Take a function_arg_info instead of a mode and a type. * config/gcn/gcn.c (num_arg_regs): Likewise. (gcn_function_arg, gcn_function_arg_advance): Update calls to num_arg_regs and targetm.calls.must_pass_in_stack. (gcn_arg_partial_bytes): Likewise. * config/i386/i386.c (ix86_must_pass_in_stack): Take a function_arg_info instead of a mode and a type. (classify_argument): Update call accordingly. * config/nds32/nds32.c (nds32_must_pass_in_stack): Take a function_arg_info instead of a mode and a type. * config/rs6000/rs6000-internal.h (rs6000_must_pass_in_stack): Likewise. * config/rs6000/rs6000-call.c (rs6000_must_pass_in_stack): Likewise. (rs6000_parm_needs_stack): Update call accordingly. (setup_incoming_varargs): Likewise. From-SVN: r274703
2019-08-20Use function_arg_info for TARGET_CALLEE_COPIESRichard Sandiford1-1/+1
The hook is passed the unpromoted type mode instead of the promoted mode. The aarch64 definition is redundant, but worth keeping for emphasis. 2019-08-20 Richard Sandiford <richard.sandiford@arm.com> gcc/ * target.def (callee_copies): Take a function_arg_info instead of a mode, type and named flag. * doc/tm.texi: Regenerate. * targhooks.h (hook_callee_copies_named): Take a function_arg_info instead of a mode, type and named flag. (hook_bool_CUMULATIVE_ARGS_mode_tree_bool_false): Delete. (hook_bool_CUMULATIVE_ARGS_mode_tree_bool_true): Likewise. (hook_bool_CUMULATIVE_ARGS_arg_info_true): New function. * targhooks.c (hook_callee_copies_named): Take a function_arg_info instead of a mode, type and named flag. (hook_bool_CUMULATIVE_ARGS_mode_tree_bool_false): Delete. (hook_bool_CUMULATIVE_ARGS_mode_tree_bool_true): Likewise. (hook_bool_CUMULATIVE_ARGS_arg_info_true): New function. * calls.h (reference_callee_copied): Take a function_arg_info instead of a mode, type and named flag. * calls.c (reference_callee_copied): Likewise. (initialize_argument_information): Update call accordingly. (emit_library_call_value_1): Likewise. * function.c (gimplify_parameters): Likewise. * config/aarch64/aarch64.c (TARGET_CALLEE_COPIES): Define to hook_bool_CUMULATIVE_ARGS_arg_info_false instead of hook_bool_CUMULATIVE_ARGS_mode_tree_bool_false. * config/c6x/c6x.c (c6x_callee_copies): Delete. (TARGET_CALLEE_COPIES): Define to hook_bool_CUMULATIVE_ARGS_arg_info_true instead. * config/epiphany/epiphany.c (TARGET_CALLEE_COPIES): Define to hook_bool_CUMULATIVE_ARGS_arg_info_true instead of hook_bool_CUMULATIVE_ARGS_mode_tree_bool_true. * config/mips/mips.c (mips_callee_copies): Take a function_arg_info instead of a mode, type and named flag. * config/mmix/mmix.c (TARGET_CALLEE_COPIES): Define to hook_bool_CUMULATIVE_ARGS_arg_info_true instead of hook_bool_CUMULATIVE_ARGS_mode_tree_bool_true. * config/mn10300/mn10300.c (TARGET_CALLEE_COPIES): Likewise. * config/msp430/msp430.c (msp430_callee_copies): Delete. (TARGET_CALLEE_COPIES): Define to hook_bool_CUMULATIVE_ARGS_arg_info_true instead. * config/pa/pa.c (pa_callee_copies): Take a function_arg_info instead of a mode, type and named flag. * config/sh/sh.c (sh_callee_copies): Likewise. * config/v850/v850.c (TARGET_CALLEE_COPIES): Define to hook_bool_CUMULATIVE_ARGS_arg_info_true instead of hook_bool_CUMULATIVE_ARGS_mode_tree_bool_true. From-SVN: r274702
2019-08-20Use function_arg_info for TARGET_FUNCTION_ARG_ADVANCERichard Sandiford1-6/+6
There seems to be a bit of confusion around this one. Almost all callers pass the same arguments as TARGET_FUNCTION_ARG, meaning that the mode is the promoted mode rather than the type mode. But the calls.c handling for normal typed arguments instead passes the unpromoted TYPE_MODE (despite passing the promoted mode to TARGET_FUNCTION_ARG). I've kept this behaviour with a ??? comment. (The calls.c handling of libgcc functions does pass the promoted mode though, as does the function.c handling of incoming arguments.) Also, a couple of the arm callers don't seem to be using the hook correctly. Again I kept the current choices and added a ??? comment. 2019-08-20 Richard Sandiford <richard.sandiford@arm.com> gcc/ * target.def (function_arg_advance): Take a function_arg_info instead of a mode, type and named flag. * doc/tm.texi: Regenerate. * targhooks.h (default_function_arg_advance): Take a function_arg_info instead of a mode, type and named flag. * targhooks.c (default_function_arg_advance): Likewise. * calls.c (initialize_argument_information): Update call to targetm.calls.function_arg_advance. (emit_library_call_value_1): Likewise. * dse.c (get_call_args): Likewise. * expr.c (block_move_libcall_safe_for_call_parm): Likewise. * function.c (assign_parms, gimplify_parameters): Likewise. * var-tracking.c (prepare_call_arguments): Likewise. * config/aarch64/aarch64.c (aarch64_function_arg_advance): Take a function_arg_info instead of a mode, type and named flag. (aarch64_setup_incoming_varargs): Update call accordingly. * config/alpha/alpha.c (alpha_function_arg_advance): Take a function_arg_info instead of a mode, type and named flag. (alpha_setup_incoming_varargs): Update call accordingly. * config/arc/arc.c (arc_function_arg_advance): Take a function_arg_info instead of a mode, type and named flag. (arc_setup_incoming_varargs): Update call accordingly. * config/arm/arm.c (arm_function_arg_advance): Take a function_arg_info instead of a mode, type and named flag. (cmse_func_args_or_return_in_stack): Update call accordingly. (arm_function_ok_for_sibcall): Likewise. (cmse_nonsecure_call_clear_caller_saved): Likewise. * config/avr/avr.c (avr_function_arg_advance): Take a function_arg_info instead of a mode, type and named flag. * config/bfin/bfin.c (bfin_function_arg_advance): Likewise. * config/c6x/c6x.c (c6x_function_arg_advance): Likewise. (c6x_call_saved_register_used): Update call accordingly. * config/cr16/cr16.c (cr16_function_arg_advance): Take a function_arg_info instead of a mode, type and named flag. * config/cris/cris.c (cris_function_arg_advance): Likewise. * config/csky/csky.c (csky_function_arg_advance): Likewise. (csky_setup_incoming_varargs): Update call accordingly. * config/epiphany/epiphany.c (epiphany_function_arg_advance): Take a function_arg_info instead of a mode, type and named flag. * config/fr30/fr30.c (fr30_function_arg_advance): Likewise. * config/frv/frv.c (frv_function_arg_advance): Likewise. * config/ft32/ft32.c (ft32_function_arg_advance): Likewise. * config/gcn/gcn.c (gcn_function_arg_advance): Likewise. * config/h8300/h8300.c (h8300_function_arg_advance): Likewise. * config/i386/i386.c (ix86_function_arg_advance): Likewise. (ix86_setup_incoming_varargs): Update call accordingly. * config/ia64/ia64.c (ia64_function_arg_advance): Take a function_arg_info instead of a mode, type and named flag. (ia64_setup_incoming_varargs): Update call accordingly. * config/iq2000/iq2000.c (iq2000_function_arg_advance): Take a function_arg_info instead of a mode, type and named flag. (iq2000_expand_prologue): Update call accordingly. * config/lm32/lm32.c (lm32_function_arg_advance): Take a function_arg_info instead of a mode, type and named flag. * config/m32c/m32c.c (m32c_function_arg_advance): Likewise. * config/m32r/m32r.c (m32r_function_arg_advance): Likewise. * config/m68k/m68k.c (m68k_function_arg_advance): Likewise. * config/mcore/mcore.c (mcore_function_arg_advance): Likewise. * config/microblaze/microblaze.c (microblaze_function_arg_advance): Likewise. (microblaze_expand_prologue): Update call accordingly. * config/mips/mips.c (mips_function_arg_advance): Take a function_arg_info instead of a mode, type and named flag. (mips_setup_incoming_varargs): Update call accordingly. (mips_output_args_xfer): Likewise. * config/mmix/mmix.c (mmix_function_arg_advance): Take a function_arg_info instead of a mode, type and named flag. * config/mn10300/mn10300.c (mn10300_function_arg_advance): Likewise. * config/moxie/moxie.c (moxie_function_arg_advance): Likewise. * config/msp430/msp430.c (msp430_function_arg_advance): Likewise. * config/nds32/nds32.c (nds32_function_arg_advance): Likewise. * config/nios2/nios2.c (nios2_function_arg_advance): Likewise. (nios2_setup_incoming_varargs): Update call accordingly. * config/nvptx/nvptx.c (nvptx_function_arg_advance): Take a function_arg_info instead of a mode, type and named flag. * config/or1k/or1k.c (or1k_function_arg_advance): Likewise. * config/pa/pa.c (pa_function_arg_advance): Likewise. * config/pdp11/pdp11.c (pdp11_function_arg_advance): Likewise. * config/pru/pru.c (pru_function_arg_advance): Likewise. * config/riscv/riscv.c (riscv_function_arg_advance): Likewise. (riscv_setup_incoming_varargs): Update call accordingly. * config/rl78/rl78.c (rl78_function_arg_advance): Take a function_arg_info instead of a mode, type and named flag. * config/rs6000/rs6000-internal.h (rs6000_function_arg_advance): Likewise. * config/rs6000/rs6000-call.c (rs6000_function_arg_advance): Likewise. (rs6000_parm_needs_stack): Update call accordingly. * config/rx/rx.c (rx_function_arg_advance): Take a function_arg_info instead of a mode, type and named flag. * config/s390/s390.c (s390_function_arg_advance): Likewise. (s390_call_saved_register_used): Update call accordingly. * config/sh/sh.c (sh_function_arg_advance): Take a function_arg_info instead of a mode, type and named flag. (sh_output_mi_thunk): Update call accordingly. * config/sparc/sparc.c (sparc_function_arg_advance): Take a function_arg_info instead of a mode, type and named flag. * config/spu/spu.c (spu_function_arg_advance): Likewise. (spu_setup_incoming_varargs): Update call accordingly. * config/stormy16/stormy16.c (xstormy16_function_arg_advance): Take a function_arg_info instead of a mode, type and named flag. * config/tilegx/tilegx.c (tilegx_function_arg_advance): Likewise. (tilegx_setup_incoming_varargs): Update call accordingly. * config/tilepro/tilepro.c (tilepro_function_arg_advance): Take a function_arg_info instead of a mode, type and named flag. (tilegx_setup_incoming_varargs): Update call accordingly. * config/v850/v850.c (v850_function_arg_advance): Take a function_arg_info instead of a mode, type and named flag. * config/vax/vax.c (vax_function_arg_advance): Likewise. * config/visium/visium.c (visium_function_arg_advance): Likewise. (visium_setup_incoming_varargs): Update call accordingly. * config/xtensa/xtensa.c (xtensa_function_arg_advance): Take a function_arg_info instead of a mode, type and named flag. From-SVN: r274701
2019-08-20Use function_arg_info for TARGET_FUNCTION_(INCOMING_)ARGRichard Sandiford1-24/+13
This patch makes both TARGET_FUNCTION_ARG and TARGET_FUNCTION_INCOMING_ARG take a function_arg_info. They have to be done together since many targets use the same function for both. The hooks are passed the promoted mode instead of the original type mode. 2019-08-20 Richard Sandiford <richard.sandiford@arm.com> gcc/ * target.def (function_arg, function_incoming_arg): Take a function_arg_info instead of a mode, tree and named flag. * doc/tm.texi: Regenerate. * targhooks.h (default_function_arg): Take a function_arg_info instead of a mode, tree and named flag. (default_function_incoming_arg): Likewise. * targhooks.c (default_function_arg): Likewise. (default_function_incoming_arg): Likewise. * calls.h (function_arg_info::end_marker_p): New function. (function_arg_info::end_marker): Likewise. * calls.c (prepare_call_address, initialize_argument_information) (expand_call, emit_library_call_value_1): Update calls to targetm.calls.function_arg and targetm.calls.function_incoming_arg. * dse.c: Include calls.h. (get_call_args): Update call to targetm.calls.function_arg. * expr.c (block_move_libcall_safe_for_call_parm): Likewise. * var-tracking.c (prepare_call_arguments): Likewise. * function.c (assign_parm_find_entry_rtl): Update call to targetm.calls.function_incoming_arg. * config/aarch64/aarch64.c (aarch64_function_arg): Take a function_arg_info instead of a mode, tree and named flag. * config/alpha/alpha.c (alpha_function_arg): Likewise. * config/arc/arc.c (arc_function_arg): Likewise. * config/arm/arm.c (arm_function_arg): Likewise. (cmse_func_args_or_return_in_stack): Update call accordingly. (arm_function_ok_for_sibcall): Likewise. (cmse_nonsecure_call_clear_caller_saved): Likewise. * config/avr/avr.c (avr_function_arg): Take a function_arg_info instead of a mode, tree and named flag. * config/bfin/bfin.c (bfin_function_arg): Likewise. * config/c6x/c6x.c (c6x_function_arg): Likewise. (c6x_call_saved_register_used): Update call accordingly. * config/cr16/cr16.c (cr16_function_arg): Take a function_arg_info instead of a mode, tree and named flag. * config/cris/cris.c (cris_function_arg, cris_function_incoming_arg) (cris_function_arg_1): Likewise. * config/csky/csky.c (csky_function_arg): Likewise. * config/epiphany/epiphany.c (epiphany_function_arg): Likewise. * config/fr30/fr30.c (fr30_function_arg): Likewise. * config/frv/frv.c (frv_function_arg, frv_function_incoming_arg) (frv_function_arg_1): Likewise. * config/ft32/ft32.c (ft32_function_arg): Likewise. * config/gcn/gcn.c (gcn_function_arg): Likewise. * config/h8300/h8300.c (h8300_function_arg): Likewise. * config/i386/i386.c (ix86_function_arg): Likewise. * config/ia64/ia64.c (ia64_function_arg, ia64_function_incoming_arg) (ia64_function_arg_1): Likewise. * config/iq2000/iq2000.c (iq2000_function_arg): Likewise. (iq2000_expand_prologue, iq2000_pass_by_reference): Update call accordingly. * config/lm32/lm32.c (lm32_function_arg): Take a function_arg_info instead of a mode, tree and named flag. * config/m32c/m32c.c (m32c_function_arg): Likewise. * config/m32r/m32r.c (m32r_function_arg): Likewise. * config/m68k/m68k.c (m68k_function_arg): Likewise. * config/mcore/mcore.c (mcore_function_arg): Likewise. * config/microblaze/microblaze.c (microblaze_function_arg): Likewise. (microblaze_expand_prologue): Update call accordingly. * config/mips/mips.c (mips_function_arg): Take a function_arg_info instead of a mode, tree and named flag. * config/mmix/mmix.c (mmix_function_incoming_arg, mmix_function_arg) (mmix_function_arg_1): Likewise. * config/mn10300/mn10300.c (mn10300_function_arg): Likewise. * config/moxie/moxie.c (moxie_function_arg): Likewise. * config/msp430/msp430.c (msp430_function_arg): Likewise. * config/nds32/nds32.c (nds32_function_arg): Likewise. * config/nios2/nios2.c (nios2_function_arg): Likewise. * config/nvptx/nvptx.c (nvptx_function_arg): Likewise. (nvptx_function_incoming_arg): Likewise. * config/or1k/or1k.c (or1k_function_arg): Likewise. * config/pa/pa.c (pa_function_arg): Likewise. * config/pdp11/pdp11.c (pdp11_function_arg): Likewise. * config/pru/pru.c (pru_function_arg): Likewise. * config/riscv/riscv.c (riscv_function_arg): Likewise. * config/rl78/rl78.c (rl78_function_arg): Likewise. * config/rs6000/rs6000-internal.h (rs6000_function_arg): Likewise. * config/rs6000/rs6000-call.c (rs6000_function_arg): Likewise. (rs6000_parm_needs_stack): Update call accordingly. * config/rx/rx.c (rx_function_arg): Take a function_arg_info instead of a mode, tree and named flag. * config/s390/s390.c (s390_function_arg): Likewise. (s390_call_saved_register_used): Update call accordingly. * config/sh/sh.c (sh_function_arg): Take a function_arg_info instead of a mode, tree and named flag. (sh_output_mi_thunk): Update call accordingly. * config/sparc/sparc.c (sparc_function_arg_1, sparc_function_arg) (sparc_function_incoming_arg): Take a function_arg_info instead of a mode, tree and named flag. * config/spu/spu.c (spu_function_arg): Likewise. * config/stormy16/stormy16.c (xstormy16_function_arg): Likewise. * config/tilegx/tilegx.c (tilegx_function_arg): Likewise. * config/tilepro/tilepro.c (tilepro_function_arg): Likewise. * config/v850/v850.c (v850_function_arg): Likewise. * config/vax/vax.c (vax_function_arg): Likewise. * config/visium/visium.c (visium_function_arg): Likewise. * config/xtensa/xtensa.c (xtensa_function_arg_1, xtensa_function_arg) (xtensa_function_incoming_arg): Likewise. From-SVN: r274700
2019-08-20Use function_arg_info for TARGET_SETUP_INCOMING_ARGSRichard Sandiford1-4/+3
The hook is passed the promoted mode instead of the original type mode. 2019-08-20 Richard Sandiford <richard.sandiford@arm.com> gcc/ * target.def (setup_incoming_varargs): Take a function_arg_info instead of a mode and tree. * doc/tm.texi: Regenerate. * targhooks.h (default_setup_incoming_varargs): Take a function_arg_info instead of a mode and tree. * targhooks.c (default_setup_incoming_varargs): Likewise. * config/aarch64/aarch64.c (aarch64_setup_incoming_varargs): Likewise. * config/alpha/alpha.c (alpha_setup_incoming_varargs): Likewise. * config/arc/arc.c (arc_setup_incoming_varargs): Likewise. * config/arm/arm.c (arm_setup_incoming_varargs): Likewise. * config/bfin/bfin.c (setup_incoming_varargs): Likewise. * config/cris/cris.c (cris_setup_incoming_varargs): Likewise. * config/csky/csky.c (csky_setup_incoming_varargs): Likewise. * config/epiphany/epiphany.c (epiphany_setup_incoming_varargs): Likewise. * config/fr30/fr30.c (fr30_setup_incoming_varargs): Likewise. * config/frv/frv.c (frv_setup_incoming_varargs): Likewise. * config/ft32/ft32.c (ft32_setup_incoming_varargs): Likewise. * config/i386/i386.c (ix86_setup_incoming_varargs): Likewise. * config/ia64/ia64.c (ia64_setup_incoming_varargs): Likewise. * config/iq2000/iq2000.c (iq2000_setup_incoming_varargs): Likewise. * config/lm32/lm32.c (lm32_setup_incoming_varargs): Likewise. * config/m32r/m32r.c (m32r_setup_incoming_varargs): Likewise. * config/mcore/mcore.c (mcore_setup_incoming_varargs): Likewise. * config/mips/mips.c (mips_setup_incoming_varargs): Likewise. * config/mmix/mmix.c (mmix_setup_incoming_varargs): Likewise. * config/moxie/moxie.c (moxie_setup_incoming_varargs): Likewise. * config/nds32/nds32.c (nds32_setup_incoming_varargs): Likewise. * config/nios2/nios2.c (nios2_setup_incoming_varargs): Likewise. * config/riscv/riscv.c (riscv_setup_incoming_varargs): Likewise. * config/rs6000/rs6000-internal.h (setup_incoming_varargs): Likewise. * config/rs6000/rs6000-call.c (setup_incoming_varargs): Likewise. * config/sh/sh.c (sh_setup_incoming_varargs): Likewise. * config/spu/spu.c (spu_setup_incoming_varargs): Likewise. * config/tilegx/tilegx.c (tilegx_setup_incoming_varargs): Likewise. * config/tilepro/tilepro.c (tilepro_setup_incoming_varargs): Likewise. * config/visium/visium.c (visium_setup_incoming_varargs): Likewise. * function.c (assign_parms_setup_varargs): Update call to targetm.calls.setup_incoming_varargs. From-SVN: r274699
2019-08-20Use function_arg_info for TARGET_PASS_BY_REFERENCERichard Sandiford1-5/+5
The hook is passed the unpromoted type mode instead of the promoted mode. 2019-08-20 Richard Sandiford <richard.sandiford@arm.com> gcc/ * target.def (pass_by_reference): Take a function_arg_info instead of a mode, type and named flag. * doc/tm.texi: Regenerate. * targhooks.h (hook_pass_by_reference_must_pass_in_stack): Update accordingly. (hook_bool_CUMULATIVE_ARGS_arg_info_false): Declare. * targhooks.c (hook_pass_by_reference_must_pass_in_stack): Take a function_arg_info instead of a mode, type and named flag. (hook_bool_CUMULATIVE_ARGS_arg_info_false): New function. * calls.h (pass_by_reference): Take a function_arg_info instead of a mode, type and named flag. * calls.c (pass_by_reference): Likewise. (pass_va_arg_by_reference): Update call accordingly. (initialize_argument_information): Likewise. (emit_library_call_value_1): Likewise. * function.c (assign_parm_find_data_types): Likewise. * var-tracking.c (prepare_call_arguments): Likewise. * stor-layout.c: Include calls.h. (compute_record_mode): Update call to targetm.calls.pass_by_reference. * config/aarch64/aarch64.c (aarch64_pass_by_reference): Take a function_arg_info instead of a mode, type and named flag. * config/alpha/alpha.c (alpha_pass_by_reference): Likewise. * config/arc/arc.c (arc_pass_by_reference): Likewise. * config/arm/arm.c (arm_pass_by_reference): Likewise. * config/bfin/bfin.c (bfin_pass_by_reference): Likewise. * config/c6x/c6x.c (c6x_pass_by_reference): Likewise. (c6x_call_saved_register_used): Update call to pass_by_reference. * config/cris/cris.c (cris_pass_by_reference): Take a function_arg_info instead of a mode, type and named flag. * config/epiphany/epiphany.c (epiphany_pass_by_reference): Take a function_arg_info instead of a mode, type and named flag. (epiphany_arg_partial_bytes): Update call accordingly. * config/ft32/ft32.c (ft32_pass_by_reference): Take a function_arg_info instead of a mode, type and named flag. (ft32_arg_partial_bytes): Update call accordingly. * config/i386/i386.c (ix86_pass_by_reference): Take a function_arg_info instead of a mode, type and named flag. * config/iq2000/iq2000.c (iq2000_pass_by_reference): Likewise. * config/m32c/m32c.c (m32c_pass_by_reference): Likewise. * config/m32r/m32r.c (m32r_pass_by_reference): Likewise. (m32r_return_in_memory): Update call accordingly. * config/mips/mips.c (mips_pass_by_reference): Take a function_arg_info instead of a mode, type and named flag. * config/mmix/mmix.c (mmix_pass_by_reference): Likewise. * config/mn10300/mn10300.c (mn10300_pass_by_reference): Likewise. * config/moxie/moxie.c (moxie_pass_by_reference): Likewise. (moxie_arg_partial_bytes): Update call accordingly. * config/msp430/msp430.c (msp430_pass_by_reference): Take a function_arg_info instead of a mode, type and named flag. * config/nvptx/nvptx.c (nvptx_pass_by_reference): Likewise. * config/or1k/or1k.c (or1k_pass_by_reference): Likewise. * config/pa/pa.c (pa_pass_by_reference): Likewise. * config/riscv/riscv.c (riscv_pass_by_reference): Likewise. (riscv_return_in_memory): Update call accordingly. * config/rs6000/rs6000-internal.h (rs6000_pass_by_reference): Take a function_arg_info instead of a mode, type and named flag. * config/rs6000/rs6000-call.c (rs6000_pass_by_reference): Likewise. (rs6000_parm_needs_stack): Update call to pass_by_reference. * config/s390/s390.c (s390_pass_by_reference): Take a function_arg_info instead of a mode, type and named flag. (s390_call_saved_register_used): Update call accordingly. * config/sh/sh.c (sh_pass_by_reference): Take a function_arg_info instead of a mode, type and named flag. * config/sparc/sparc.c (sparc_pass_by_reference): Likewise. * config/spu/spu.c (spu_pass_by_reference): Likewise. * config/tilegx/tilegx.c (tilegx_pass_by_reference): Likewise. * config/tilepro/tilepro.c (tilepro_pass_by_reference): Likewise. * config/v850/v850.c (v850_pass_by_reference): Likewise. * config/visium/visium.c (visium_pass_by_reference): Likewise. gcc/ada/ * gcc-interface/misc.c (default_pass_by_ref): Update call to pass_by_reference. From-SVN: r274698
2019-05-16gcc: move assemble_start_function / assemble_end_function to output_mi_thunkMax Filippov1-1/+5
Let backends call assemble_start_function after they have generated thunk function body so that a constant pool could be output if it is required. This may help backends to avoid implementing custom constant loading code specifically for the MI thunk and reuse existing functionality. gcc/ 2019-05-16 Max Filippov <jcmvbkbc@gmail.com> * cgraphunit.c (cgraph_node::expand_thunk): Remove assemble_start_function and assemble_end_function calls. * config/alpha/alpha.c (alpha_output_mi_thunk_osf): Call assemble_start_function and assemble_end_function. * config/arc/arc.c (arc_output_mi_thunk): Likewise. * config/arm/arm.c (arm_output_mi_thunk): Likewise. * config/bfin/bfin.c (bfin_output_mi_thunk): Likewise. * config/c6x/c6x.c (c6x_output_mi_thunk): Likewise. * config/cris/cris.c (cris_asm_output_mi_thunk): Likewise. * config/csky/csky.c (csky_output_mi_thunk): Likewise. * config/epiphany/epiphany.c (epiphany_output_mi_thunk): Likewise. * config/frv/frv.c (frv_asm_output_mi_thunk): Likewise. * config/i386/i386.c (x86_output_mi_thunk): Likewise. * config/ia64/ia64.c (ia64_output_mi_thunk): Likewise. * config/m68k/m68k.c (m68k_output_mi_thunk): Likewise. * config/microblaze/microblaze.c (microblaze_asm_output_mi_thunk): Likewise. * config/mips/mips.c (mips_output_mi_thunk): Likewise. * config/mmix/mmix.c (mmix_asm_output_mi_thunk): Likewise. * config/mn10300/mn10300.c (mn10300_asm_output_mi_thunk): Likewise. * config/nds32/nds32.c (nds32_asm_output_mi_thunk): Likewise. * config/nios2/nios2.c (nios2_asm_output_mi_thunk): Likewise. * config/or1k/or1k.c (or1k_output_mi_thunk): Likewise. * config/pa/pa.c (pa_asm_output_mi_thunk): Likewise. * config/riscv/riscv.c (riscv_output_mi_thunk): Likewise. * config/rs6000/rs6000.c (rs6000_output_mi_thunk): Likewise. * config/s390/s390.c (s390_output_mi_thunk): Likewise. * config/sh/sh.c (sh_output_mi_thunk): Likewise. * config/sparc/sparc.c (sparc_output_mi_thunk): Likewise. * config/spu/spu.c (spu_output_mi_thunk): Likewise. * config/stormy16/stormy16.c (xstormy16_asm_output_mi_thunk): Likewise. * config/tilegx/tilegx.c (tilegx_output_mi_thunk): Likewise. * config/tilepro/tilepro.c (tilepro_asm_output_mi_thunk): Likewise. * config/vax/vax.c (vax_output_mi_thunk): Likewise. From-SVN: r271293
2019-03-11Wrap option names in gcc internal messages with %< and %>.Martin Liska1-1/+2
2019-03-11 Martin Liska <mliska@suse.cz> * check-internal-format-escaping.py: New file. 2019-03-11 Martin Liska <mliska@suse.cz> * builtins.c (expand_builtin_thread_pointer): Wrap an option name in a string format message and fix GNU coding style. (expand_builtin_set_thread_pointer): Likewise. * common/config/aarch64/aarch64-common.c (aarch64_rewrite_selected_cpu): Likewise. * common/config/alpha/alpha-common.c (alpha_handle_option): Likewise. * common/config/arc/arc-common.c (arc_handle_option): Likewise. * common/config/arm/arm-common.c (arm_parse_fpu_option): Likewise. * common/config/bfin/bfin-common.c (bfin_handle_option): Likewise. * common/config/i386/i386-common.c (ix86_handle_option): Likewise. * common/config/ia64/ia64-common.c (ia64_handle_option): Likewise. * common/config/m68k/m68k-common.c (m68k_handle_option): Likewise. * common/config/msp430/msp430-common.c (msp430_handle_option): Likewise. * common/config/nds32/nds32-common.c (nds32_handle_option): Likewise. * common/config/powerpcspe/powerpcspe-common.c (rs6000_handle_option): Likewise. * common/config/riscv/riscv-common.c (riscv_subset_list::parsing_subset_version): Likewise. (riscv_subset_list::parse_std_ext): Likewise. (riscv_subset_list::parse_sv_or_non_std_ext): Likewise. (riscv_subset_list::parse): Likewise. * common/config/rs6000/rs6000-common.c (rs6000_handle_option): Likewise. * config/aarch64/aarch64.c (aarch64_parse_one_option_token): Likewise. (aarch64_override_options_internal): Likewise. (aarch64_validate_mcpu): Likewise. (aarch64_validate_march): Likewise. (aarch64_validate_mtune): Likewise. (aarch64_override_options): Likewise. * config/alpha/alpha.c (alpha_option_override): Likewise. * config/arc/arc.c (arc_init): Likewise. (parse_mrgf_banked_regs_option): Likewise. (arc_override_options): Likewise. (arc_expand_builtin_aligned): Likewise. * config/arm/arm-builtins.c (arm_expand_neon_builtin): Likewise. (arm_expand_builtin): Likewise. * config/arm/arm.c (arm_option_check_internal): Likewise. (arm_configure_build_target): Likewise. (arm_option_override): Likewise. (arm_options_perform_arch_sanity_checks): Likewise. (arm_handle_cmse_nonsecure_entry): Likewise. (arm_handle_cmse_nonsecure_call): Likewise. (arm_tls_referenced_p): Likewise. (thumb1_expand_prologue): Likewise. * config/avr/avr.c (avr_option_override): Likewise. * config/bfin/bfin.c (bfin_option_override): Likewise. * config/c6x/c6x.c (c6x_option_override): Likewise. * config/cr16/cr16.c (cr16_override_options): Likewise. * config/cris/cris.c (cris_option_override): Likewise. * config/csky/csky.c (csky_handle_isr_attribute): Likewise. * config/darwin-c.c (macosx_version_as_macro): Likewise. * config/darwin.c (darwin_override_options): Likewise. * config/frv/frv.c (frv_expand_builtin): Likewise. * config/h8300/h8300.c (h8300_option_override): Likewise. * config/i386/i386.c (parse_mtune_ctrl_str): Likewise. (ix86_option_override_internal): Likewise. (warn_once_call_ms2sysv_xlogues): Likewise. (ix86_expand_prologue): Likewise. (split_stack_prologue_scratch_regno): Likewise. (ix86_warn_parameter_passing_abi): Likewise. * config/ia64/ia64.c (fix_range): Likewise. * config/m68k/m68k.c (m68k_option_override): Likewise. * config/microblaze/microblaze.c (microblaze_option_override): Likewise. * config/mips/mips.c (mips_emit_probe_stack_range): Likewise. (mips_set_compression_mode): Likewise. * config/mmix/mmix.c (mmix_option_override): Likewise. * config/mn10300/mn10300.c (mn10300_option_override): Likewise. * config/msp430/msp430.c (msp430_option_override): Likewise. * config/nds32/nds32.c (nds32_option_override): Likewise. * config/nios2/nios2.c (nios2_custom_check_insns): Likewise. (nios2_option_override): Likewise. (nios2_expand_custom_builtin): Likewise. * config/nvptx/mkoffload.c (main): Likewise. * config/nvptx/nvptx.c (diagnose_openacc_conflict): Likewise. * config/pa/pa.c (fix_range): Likewise. (pa_option_override): Likewise. * config/riscv/riscv.c (riscv_parse_cpu): Likewise. (riscv_option_override): Likewise. * config/rl78/rl78.c (rl78_option_override): Likewise. * config/rs6000/aix61.h: Likewise. * config/rs6000/aix71.h: Likewise. * config/rs6000/aix72.h: Likewise. * config/rs6000/driver-rs6000.c (elf_platform): Likewise. * config/rs6000/freebsd64.h: Likewise. * config/rs6000/linux64.h: Likewise. * config/rs6000/rs6000.c (rs6000_option_override_internal): Likewise. (rs6000_expand_zeroop_builtin): Likewise. (rs6000_expand_mtfsb_builtin): Likewise. (rs6000_expand_set_fpscr_rn_builtin): Likewise. (rs6000_expand_set_fpscr_drn_builtin): Likewise. (rs6000_invalid_builtin): Likewise. (rs6000_expand_split_stack_prologue): Likewise. * config/rs6000/rtems.h: Likewise. * config/rx/rx.c (valid_psw_flag): Likewise. (rx_expand_builtin): Likewise. * config/s390/s390-c.c (s390_resolve_overloaded_builtin): Likewise. * config/s390/s390.c (s390_expand_builtin): Likewise. (s390_function_profiler): Likewise. (s390_option_override_internal): Likewise. (s390_option_override): Likewise. * config/sh/sh.c (sh_option_override): Likewise. (sh_builtin_saveregs): Likewise. (sh_fix_range): Likewise. * config/sh/vxworks.h: Likewise. * config/sparc/sparc.c (sparc_option_override): Likewise. * config/spu/spu.c (spu_option_override): Likewise. (fix_range): Likewise. * config/visium/visium.c (visium_option_override): Likewise. (visium_handle_interrupt_attr): Likewise. * config/xtensa/xtensa.c (xtensa_option_override): Likewise. * dbgcnt.c (dbg_cnt_set_limit_by_name): Likewise. (dbg_cnt_process_opt): Likewise. * dwarf2out.c (output_dwarf_version): Likewise. * except.c (expand_eh_return): Likewise. * gcc.c (defined): Likewise. (driver_handle_option): Likewise. (process_command): Likewise. (compare_files): Likewise. (driver::prepare_infiles): Likewise. (driver::do_spec_on_infiles): Likewise. (driver::maybe_run_linker): Likewise. * omp-offload.c (oacc_parse_default_dims): Likewise. * opts-global.c (handle_common_deferred_options): Likewise. * opts.c (parse_sanitizer_options): Likewise. (common_handle_option): Likewise. (enable_warning_as_error): Likewise. * passes.c (enable_disable_pass): Likewise. * plugin.c (parse_plugin_arg_opt): Likewise. (default_plugin_dir_name): Likewise. * targhooks.c (default_expand_builtin_saveregs): Likewise. (default_pch_valid_p): Likewise. * toplev.c (init_asm_output): Likewise. (process_options): Likewise. (toplev::run_self_tests): Likewise. * tree-cfg.c (verify_gimple_call): Likewise. * tree-inline.c (inline_forbidden_p_stmt): Likewise. (tree_inlinable_function_p): Likewise. * var-tracking.c (vt_find_locations): Likewise. 2019-03-11 Martin Liska <mliska@suse.cz> * gcc-interface/misc.c (gnat_post_options) Wrap an option name in a string format message and fix GNU coding style.: 2019-03-11 Martin Liska <mliska@suse.cz> * c-attribs.c (handle_nocf_check_attribute): Wrap an option name in a string format message and fix GNU coding style. * c-common.c (vector_types_convertible_p): Likewise. (c_build_vec_perm_expr): Likewise. * c-indentation.c (get_visual_column): Likewise. * c-opts.c (c_common_handle_option): Likewise. (c_common_post_options): Likewise. (sanitize_cpp_opts): Likewise. * c-pch.c (c_common_pch_pragma): Likewise. * c-pragma.c (handle_pragma_pack): Likewise. 2019-03-11 Martin Liska <mliska@suse.cz> * c-decl.c (check_for_loop_decls): Wrap an option name in a string format message and fix GNU coding style. * c-parser.c (c_parser_declspecs): Likewise. 2019-03-11 Martin Liska <mliska@suse.cz> * call.c (convert_arg_to_ellipsis): Wrap an option name in a string format message and fix GNU coding style. (build_over_call): Likewise. * class.c (check_field_decl): Likewise. (layout_nonempty_base_or_field): Likewise. * constexpr.c (cxx_eval_loop_expr): Likewise. * cvt.c (type_promotes_to): Likewise. * decl.c (cxx_init_decl_processing): Likewise. (mark_inline_variable): Likewise. (grokdeclarator): Likewise. * decl2.c (record_mangling): Likewise. * error.c (maybe_warn_cpp0x): Likewise. * except.c (doing_eh): Likewise. * mangle.c (maybe_check_abi_tags): Likewise. * parser.c (cp_parser_diagnose_invalid_type_name): Likewise. (cp_parser_userdef_numeric_literal): Likewise. (cp_parser_primary_expression): Likewise. (cp_parser_unqualified_id): Likewise. (cp_parser_pseudo_destructor_name): Likewise. (cp_parser_builtin_offsetof): Likewise. (cp_parser_lambda_expression): Likewise. (cp_parser_lambda_introducer): Likewise. (cp_parser_lambda_declarator_opt): Likewise. (cp_parser_selection_statement): Likewise. (cp_parser_init_statement): Likewise. (cp_parser_decomposition_declaration): Likewise. (cp_parser_function_specifier_opt): Likewise. (cp_parser_static_assert): Likewise. (cp_parser_simple_type_specifier): Likewise. (cp_parser_namespace_definition): Likewise. (cp_parser_using_declaration): Likewise. (cp_parser_ctor_initializer_opt_and_function_body): Likewise. (cp_parser_initializer_list): Likewise. (cp_parser_type_parameter_key): Likewise. (cp_parser_member_declaration): Likewise. (cp_parser_try_block): Likewise. (cp_parser_std_attribute_spec): Likewise. (cp_parser_requires_clause_opt): Likewise. * pt.c (check_template_variable): Likewise. (check_default_tmpl_args): Likewise. (push_tinst_level_loc): Likewise. (instantiate_pending_templates): Likewise. (invalid_nontype_parm_type_p): Likewise. * repo.c (get_base_filename): Likewise. * rtti.c (typeid_ok_p): Likewise. (build_dynamic_cast_1): Likewise. * tree.c (maybe_warn_parm_abi): Likewise. 2019-03-11 Martin Liska <mliska@suse.cz> * decl.c (match_record_decl): Wrap an option name in a string format message and fix GNU coding style. (gfc_match_pointer): Likewise. * expr.c (find_array_section): Likewise. * intrinsic.c (gfc_is_intrinsic): Likewise. * options.c (gfc_post_options): Likewise. * primary.c (match_integer_constant): Likewise. * trans-common.c (translate_common): Likewise. 2019-03-11 Martin Liska <mliska@suse.cz> * lto-lang.c (lto_post_options): Wrap an option name in a string format message and fix GNU coding style. * lto-symtab.c (lto_symtab_merge_decls_2): Likewise. 2019-03-11 Martin Liska <mliska@suse.cz> * g++.dg/conversion/simd3.C (foo): Wrap option names with apostrophe character. * g++.dg/cpp1z/decomp3.C (test): Likewise. (test3): Likewise. * g++.dg/cpp1z/decomp4.C (test): Likewise. * g++.dg/cpp1z/decomp44.C (foo): Likewise. * g++.dg/cpp1z/decomp45.C (f): Likewise. * g++.dg/opt/pr34036.C: Likewise. * g++.dg/spellcheck-c++-11-keyword.C: Likewise. * gcc.dg/c90-fordecl-1.c (foo): Likewise. * gcc.dg/cpp/dir-only-4.c: Likewise. * gcc.dg/cpp/dir-only-5.c: Likewise. * gcc.dg/cpp/pr71591.c: Likewise. * gcc.dg/format/opt-1.c: Likewise. * gcc.dg/format/opt-2.c: Likewise. * gcc.dg/format/opt-3.c: Likewise. * gcc.dg/format/opt-4.c: Likewise. * gcc.dg/format/opt-5.c: Likewise. * gcc.dg/format/opt-6.c: Likewise. * gcc.dg/pr22231.c: Likewise. * gcc.dg/pr33007.c: Likewise. * gcc.dg/simd-1.c (hanneke): Likewise. * gcc.dg/simd-5.c: Likewise. * gcc.dg/simd-6.c: Likewise. * gcc.dg/spellcheck-options-14.c: Likewise. * gcc.dg/spellcheck-options-15.c: Likewise. * gcc.dg/spellcheck-options-16.c: Likewise. * gcc.dg/spellcheck-options-17.c: Likewise. * gcc.dg/tree-ssa/pr23109.c: Likewise. * gcc.dg/tree-ssa/recip-5.c: Likewise. * gcc.target/i386/cet-notrack-1a.c (func): Likewise. (__attribute__): Likewise. * gcc.target/i386/cet-notrack-icf-1.c (fn3): Likewise. * gcc.target/i386/cet-notrack-icf-3.c (__attribute__): Likewise. * gcc.target/powerpc/warn-1.c: Likewise. * gcc.target/powerpc/warn-2.c: Likewise. From-SVN: r269586
2019-01-01Update copyright years.Jakub Jelinek9-9/+9
From-SVN: r267494
2018-09-18Handle a library implementation of ffs calling __builtin_ffs.Hans-Peter Nilsson1-0/+19
* config/mmix/mmix.c (TARGET_INIT_LIBFUNCS): Override with... (mmix_init_libfuncs): New function: make __builtin_ffs expand to __ffsdi2. From-SVN: r264381
2018-09-09re PR target/86794 (mmix port needs updating for CVE-2017-5753)Hans-Peter Nilsson1-0/+3
PR target/86794 * config/mmix/mmix.c (TARGET_HAVE_SPECULATION_SAFE_VALUE): Redefine to speculation_safe_value_not_needed. From-SVN: r264184
2018-09-09re PR target/85666 (gcc-8.0.1 fails to build mmix target: ↵Hans-Peter Nilsson1-2/+8
gcc/libgcc/libgcc2.h:203:20: internal compiler error: in leaf_function_p, at final.c:4488) PR target/85666 * config/mmix/mmix.c (mmix_assemble_integer): Handle byte-size non-CONST_INT rtx:es using assemble_integer_with_op ".byte". From-SVN: r264183
2018-09-09re PR target/85666 (gcc-8.0.1 fails to build mmix target: ↵Hans-Peter Nilsson1-11/+8
gcc/libgcc/libgcc2.h:203:20: internal compiler error: in leaf_function_p, at final.c:4488) PR target/85666 * config/mmix/mmix.c (MMIX_CFUN_NEEDS_SAVED_EH_RETURN_ADDRESS): Don't call leaf_function_p, instead use has_hard_reg_initial_val. From-SVN: r264182
2018-07-05Replace NO_IMPLICIT_EXTERN_C with SYSTEM_IMPLICIT_EXTERN_C.Nathan Sidwell1-2/+0
gcc/ Replace NO_IMPLICIT_EXTERN_C with SYSTEM_IMPLICIT_EXTERN_C. * doc/cpp.texi: Update comment. * doc/tm.texi: Rebuilt. * doc/tm.texi.in (NO_IMPLICIT_EXTERN_C): Replace with ... (SYSTEM_IMPLICIT_EXTERN_C): ... this, opposite sense. * doc/extend.texi (Backwards Compatibility): Clarify it is system headers affected by extern "C". * system.h: Poison NO_IMPLICIT_EXTERN_C. * config/alpha/alpha.h, config/arm/uclinux-elf.h, config/bfin/elf.h, config/cris/cris.h, config/darwin.h, config/dragonfly.h, config/freebsd.h, config/gnu-user.h, config/i386/cygming.h, config/i386/djgpp.h, config/i386/nto.h, config/ia64/hpux.h, config/lm32/lm32.h, config/lm32/uclinux-elf.h, config/lynx.h, config/mips/elf.h, config/mmix/mmix.h, config/netbsd.h, config/pa/pa-hpux.h, config/powerpcspe/sysv4.h, config/riscv/elf.h, config/rs6000/sysv4.h, config/rtems.h, config/s390/tpf.h, config/sh/newlib.h, config/sol2.h, config/sparc/openbsd64.h, config/sparc/sp-elf.h, config/sparc/sp64-elf.h, config/spu/spu.h, config/stormy16/stormy16.h, config/v850/v850.h, config/visium/visium.h, config/vx-common.h, config/xtensa/elf.h: Don't define NO_IMPLICIT_EXTERN_C. * config/rs6000/aix.h: Set SYSTEM_IMPLICIT_EXTERN_C. gcc/c-family/ * c-lex.c (fe_file_change): Check SYSTEM_IMPLICIT_EXTERN_C not NO_IMPLICIT_EXTERN_C. gcc/cp/ * cp/decl.c (decls_match): Check SYSTEM_IMPLICIT_EXTERN_C not NO_IMPLICIT_EXTERN_C. * cp/parser.c (cp_parser_parameter_declaration_clause): Likewise. From-SVN: r262437
2018-01-03Update copyright years.Jakub Jelinek9-9/+9
From-SVN: r256169
2017-12-16poly_int: IN_TARGET_CODERichard Sandiford1-0/+2
This patch makes each target-specifc TU define an IN_TARGET_CODE macro, which is used to decide whether poly_int<1, C> should convert to C. 2017-12-16 Richard Sandiford <richard.sandiford@linaro.org> Alan Hayward <alan.hayward@arm.com> David Sherwood <david.sherwood@arm.com> gcc/ * doc/sourcebuild.texi: Document IN_TARGET_CODE. * genattrtab.c (write_header): Define IN_TARGET_CODE to 1 in the target C file. * genautomata.c (main): Likewise. * genconditions.c (write_header): Likewise. * genemit.c (main): Likewise. * genextract.c (print_header): Likewise. * genopinit.c (main): Likewise. * genoutput.c (output_prologue): Likewise. * genpeep.c (main): Likewise. * genpreds.c (write_insn_preds_c): Likewise. * genrecog.c (writer_header): Likewise. * config/aarch64/aarch64-builtins.c (IN_TARGET_CODE): Define. * config/aarch64/aarch64-c.c (IN_TARGET_CODE): Likewise. * config/aarch64/aarch64.c (IN_TARGET_CODE): Likewise. * config/aarch64/cortex-a57-fma-steering.c (IN_TARGET_CODE): Likewise. * config/aarch64/driver-aarch64.c (IN_TARGET_CODE): Likewise. * config/alpha/alpha.c (IN_TARGET_CODE): Likewise. * config/alpha/driver-alpha.c (IN_TARGET_CODE): Likewise. * config/arc/arc-c.c (IN_TARGET_CODE): Likewise. * config/arc/arc.c (IN_TARGET_CODE): Likewise. * config/arc/driver-arc.c (IN_TARGET_CODE): Likewise. * config/arm/aarch-common.c (IN_TARGET_CODE): Likewise. * config/arm/arm-builtins.c (IN_TARGET_CODE): Likewise. * config/arm/arm-c.c (IN_TARGET_CODE): Likewise. * config/arm/arm.c (IN_TARGET_CODE): Likewise. * config/arm/driver-arm.c (IN_TARGET_CODE): Likewise. * config/avr/avr-c.c (IN_TARGET_CODE): Likewise. * config/avr/avr-devices.c (IN_TARGET_CODE): Likewise. * config/avr/avr-log.c (IN_TARGET_CODE): Likewise. * config/avr/avr.c (IN_TARGET_CODE): Likewise. * config/avr/driver-avr.c (IN_TARGET_CODE): Likewise. * config/avr/gen-avr-mmcu-specs.c (IN_TARGET_CODE): Likewise. * config/bfin/bfin.c (IN_TARGET_CODE): Likewise. * config/c6x/c6x.c (IN_TARGET_CODE): Likewise. * config/cr16/cr16.c (IN_TARGET_CODE): Likewise. * config/cris/cris.c (IN_TARGET_CODE): Likewise. * config/darwin.c (IN_TARGET_CODE): Likewise. * config/epiphany/epiphany.c (IN_TARGET_CODE): Likewise. * config/epiphany/mode-switch-use.c (IN_TARGET_CODE): Likewise. * config/epiphany/resolve-sw-modes.c (IN_TARGET_CODE): Likewise. * config/fr30/fr30.c (IN_TARGET_CODE): Likewise. * config/frv/frv.c (IN_TARGET_CODE): Likewise. * config/ft32/ft32.c (IN_TARGET_CODE): Likewise. * config/h8300/h8300.c (IN_TARGET_CODE): Likewise. * config/i386/djgpp.c (IN_TARGET_CODE): Likewise. * config/i386/driver-i386.c (IN_TARGET_CODE): Likewise. * config/i386/driver-mingw32.c (IN_TARGET_CODE): Likewise. * config/i386/host-cygwin.c (IN_TARGET_CODE): Likewise. * config/i386/host-i386-darwin.c (IN_TARGET_CODE): Likewise. * config/i386/host-mingw32.c (IN_TARGET_CODE): Likewise. * config/i386/i386-c.c (IN_TARGET_CODE): Likewise. * config/i386/i386.c (IN_TARGET_CODE): Likewise. * config/i386/intelmic-mkoffload.c (IN_TARGET_CODE): Likewise. * config/i386/msformat-c.c (IN_TARGET_CODE): Likewise. * config/i386/winnt-cxx.c (IN_TARGET_CODE): Likewise. * config/i386/winnt-stubs.c (IN_TARGET_CODE): Likewise. * config/i386/winnt.c (IN_TARGET_CODE): Likewise. * config/i386/x86-tune-sched-atom.c (IN_TARGET_CODE): Likewise. * config/i386/x86-tune-sched-bd.c (IN_TARGET_CODE): Likewise. * config/i386/x86-tune-sched-core.c (IN_TARGET_CODE): Likewise. * config/i386/x86-tune-sched.c (IN_TARGET_CODE): Likewise. * config/ia64/ia64-c.c (IN_TARGET_CODE): Likewise. * config/ia64/ia64.c (IN_TARGET_CODE): Likewise. * config/iq2000/iq2000.c (IN_TARGET_CODE): Likewise. * config/lm32/lm32.c (IN_TARGET_CODE): Likewise. * config/m32c/m32c-pragma.c (IN_TARGET_CODE): Likewise. * config/m32c/m32c.c (IN_TARGET_CODE): Likewise. * config/m32r/m32r.c (IN_TARGET_CODE): Likewise. * config/m68k/m68k.c (IN_TARGET_CODE): Likewise. * config/mcore/mcore.c (IN_TARGET_CODE): Likewise. * config/microblaze/microblaze-c.c (IN_TARGET_CODE): Likewise. * config/microblaze/microblaze.c (IN_TARGET_CODE): Likewise. * config/mips/driver-native.c (IN_TARGET_CODE): Likewise. * config/mips/frame-header-opt.c (IN_TARGET_CODE): Likewise. * config/mips/mips.c (IN_TARGET_CODE): Likewise. * config/mmix/mmix.c (IN_TARGET_CODE): Likewise. * config/mn10300/mn10300.c (IN_TARGET_CODE): Likewise. * config/moxie/moxie.c (IN_TARGET_CODE): Likewise. * config/msp430/driver-msp430.c (IN_TARGET_CODE): Likewise. * config/msp430/msp430-c.c (IN_TARGET_CODE): Likewise. * config/msp430/msp430.c (IN_TARGET_CODE): Likewise. * config/nds32/nds32-cost.c (IN_TARGET_CODE): Likewise. * config/nds32/nds32-fp-as-gp.c (IN_TARGET_CODE): Likewise. * config/nds32/nds32-intrinsic.c (IN_TARGET_CODE): Likewise. * config/nds32/nds32-isr.c (IN_TARGET_CODE): Likewise. * config/nds32/nds32-md-auxiliary.c (IN_TARGET_CODE): Likewise. * config/nds32/nds32-memory-manipulation.c (IN_TARGET_CODE): Likewise. * config/nds32/nds32-pipelines-auxiliary.c (IN_TARGET_CODE): Likewise. * config/nds32/nds32-predicates.c (IN_TARGET_CODE): Likewise. * config/nds32/nds32.c (IN_TARGET_CODE): Likewise. * config/nios2/nios2.c (IN_TARGET_CODE): Likewise. * config/nvptx/mkoffload.c (IN_TARGET_CODE): Likewise. * config/nvptx/nvptx.c (IN_TARGET_CODE): Likewise. * config/pa/pa.c (IN_TARGET_CODE): Likewise. * config/pdp11/pdp11.c (IN_TARGET_CODE): Likewise. * config/powerpcspe/driver-powerpcspe.c (IN_TARGET_CODE): Likewise. * config/powerpcspe/host-darwin.c (IN_TARGET_CODE): Likewise. * config/powerpcspe/host-ppc64-darwin.c (IN_TARGET_CODE): Likewise. * config/powerpcspe/powerpcspe-c.c (IN_TARGET_CODE): Likewise. * config/powerpcspe/powerpcspe-linux.c (IN_TARGET_CODE): Likewise. * config/powerpcspe/powerpcspe.c (IN_TARGET_CODE): Likewise. * config/riscv/riscv-builtins.c (IN_TARGET_CODE): Likewise. * config/riscv/riscv-c.c (IN_TARGET_CODE): Likewise. * config/riscv/riscv.c (IN_TARGET_CODE): Likewise. * config/rl78/rl78-c.c (IN_TARGET_CODE): Likewise. * config/rl78/rl78.c (IN_TARGET_CODE): Likewise. * config/rs6000/driver-rs6000.c (IN_TARGET_CODE): Likewise. * config/rs6000/host-darwin.c (IN_TARGET_CODE): Likewise. * config/rs6000/host-ppc64-darwin.c (IN_TARGET_CODE): Likewise. * config/rs6000/rs6000-c.c (IN_TARGET_CODE): Likewise. * config/rs6000/rs6000-linux.c (IN_TARGET_CODE): Likewise. * config/rs6000/rs6000-p8swap.c (IN_TARGET_CODE): Likewise. * config/rs6000/rs6000-string.c (IN_TARGET_CODE): Likewise. * config/rs6000/rs6000.c (IN_TARGET_CODE): Likewise. * config/rx/rx.c (IN_TARGET_CODE): Likewise. * config/s390/driver-native.c (IN_TARGET_CODE): Likewise. * config/s390/s390-c.c (IN_TARGET_CODE): Likewise. * config/s390/s390.c (IN_TARGET_CODE): Likewise. * config/sh/sh-c.c (IN_TARGET_CODE): Likewise. * config/sh/sh-mem.cc (IN_TARGET_CODE): Likewise. * config/sh/sh.c (IN_TARGET_CODE): Likewise. * config/sh/sh_optimize_sett_clrt.cc (IN_TARGET_CODE): Likewise. * config/sh/sh_treg_combine.cc (IN_TARGET_CODE): Likewise. * config/sparc/driver-sparc.c (IN_TARGET_CODE): Likewise. * config/sparc/sparc-c.c (IN_TARGET_CODE): Likewise. * config/sparc/sparc.c (IN_TARGET_CODE): Likewise. * config/spu/spu-c.c (IN_TARGET_CODE): Likewise. * config/spu/spu.c (IN_TARGET_CODE): Likewise. * config/stormy16/stormy16.c (IN_TARGET_CODE): Likewise. * config/tilegx/mul-tables.c (IN_TARGET_CODE): Likewise. * config/tilegx/tilegx-c.c (IN_TARGET_CODE): Likewise. * config/tilegx/tilegx.c (IN_TARGET_CODE): Likewise. * config/tilepro/mul-tables.c (IN_TARGET_CODE): Likewise. * config/tilepro/tilepro-c.c (IN_TARGET_CODE): Likewise. * config/tilepro/tilepro.c (IN_TARGET_CODE): Likewise. * config/v850/v850-c.c (IN_TARGET_CODE): Likewise. * config/v850/v850.c (IN_TARGET_CODE): Likewise. * config/vax/vax.c (IN_TARGET_CODE): Likewise. * config/visium/visium.c (IN_TARGET_CODE): Likewise. * config/vms/vms-c.c (IN_TARGET_CODE): Likewise. * config/vms/vms-f.c (IN_TARGET_CODE): Likewise. * config/vms/vms.c (IN_TARGET_CODE): Likewise. * config/xtensa/xtensa.c (IN_TARGET_CODE): Likewise. Co-Authored-By: Alan Hayward <alan.hayward@arm.com> Co-Authored-By: David Sherwood <david.sherwood@arm.com> From-SVN: r255743
2017-10-29Delete obsolete SDB debug info support.James E Wilson1-1/+1
gcc/ * Makefile.in (OBJS): Delete sdbout.o. (GTFILES): Delete $(srcdir)/sdbout.c. * debug.h: Delete sdb_debug_hooks. * final.c: Delete sdbout.h include. (final_scan_insn): Delete SDB_DEBUG check. (rest_of_clean_state): Likewise. * output.h: Delete sdb_begin_function_line. * sdbout.c: Delete. * sdbout.h: Delete. * toplev.c: Delete sdbout.h include. (process_options): Delete SDB_DEBUG check. * tree-core.h (tree_type_common): Delete pointer field of tree_type_symtab. * tree.c (copy_node): Clear TYPE_SYMTAB_DIE instead of TYPE_SYMTAB_POINTER. * tree.h (TYPE_SYMTAB_POINTER): Delete. (TYPE_SYMTAB_IS_POINTER): Delete. (TYPE_SYMTAB_IS_DIE): Renumber. * xcoffout.c: Refer to former sdbout.c file. (xcoffout_begin_prologue): Use past tense for sdbout.c reference. * doc/install.texi (--with-stabs): Delete COFF and ECOFF info. * doc/invoke.texi (SEEALSO): Delete adb and sdb references. (Debugging Options): Delete -gcoff. (-gstabs): Delete SDB reference. (-gcoff): Delete. (-gcoff@var{level}): Delete. * doc/passes.texi (Debugging information output): Delete SDB and sdbout.c references. * doc/tm.texi: Regenerate. * doc/tm.texi.in (DWARF_CIE_DATA_ALIGNMENT): Delete SDB from xref. (SDB and DWARF): Change node name to DWARF and delete SDB and COFF references. (DEBUGGER_AUTO_OFFSET): Delete COFF and SDB references. (PREFERRED_DEBUGGING_TYPE): Delete SDB_DEBUG and -gcoff references. (SDB_DEBUGGING_INFO): Delete. (PUT_SDB_@dots{}, SDB_DELIM, SDB_ALLOW_UNKNOWN_REFERENCES) SDB_ALLOW_FORWARD_REFERENCES, SDB_OUTPUT_SOURCE_LINE): Delete. * target.def (output_source_filename): Delete COFF reference. * common.opt (gcoff): Delete. (gxcoff+): Update Negative chain. * defaults.h: Delete all references to SDB_DEBUGGING_INFO and SDB_DEBUG. * dwarf2out.c (gen_array_type_die): Change SDB to debuggers. * flag-types.h (enum debug_info_type): Delete SDB_DEBUG. * function.c (number_blocks): Delete SDB_DEBUGGING_INFO, SDB_DEBUG, and SDB references. (expand_function_start): Change sdb reference to past tense. (expand_function_end): Change sdb reference to past tense. * gcc.c (cpp_unique_options): Delete gcoff3 reference. * opts.c (debug_type_names): Delete coff entry. (common_handle_option): Delete OPT_gcoff case. * system.h (SDB_DEBUG, SDB_DEBUGGING_INFO): Poison. * config/dbxcoff.h (PREFERRED_DEBUGGING_TYPE): Set to DBX_DEBUG. * config/cris/cris.h: Delete SDB reference in comment. * config/i386/cygming.h: Don't define SDB_DEBUGGING_INFO. (ASM_DECLARE_FUNCTION_NAME): Delete SDB reference from comment. * config/i386/gas.h: Don't define SDB_DEBUGGING_INFO. * config/i386/i386.c (svr4_dbx_register_map): Change SDB references to past tense. (ix86_expand_prologue): Likewise. * config/i386/winnt.c (i386_pe_start_function): Don't check SDB_DEBUG. * config/ia64/ia64.h: Likewise. * config/m68k/m68kelf.h (DBX_REGISTER_NUMBER): Delete SDB reference. * config/mips/mips.h (SUBTARGET_ASM_DEBUGGING_SPEC): Delete gcoff* support. * config/mmix/mmix.h: Likewise. * config/nds32/nds32.c: Likewise. * config/stormy/storym16.h: Likewise. * config/visium/visium.h: Likewise. * config/vx-common.h (SDB_DEBUGGING_INFO): Delete undef. gcc/fortran/ * invoke.texi: Delete adb and sdb references. gccc/testsuite/ * lib/gcc-dg.exp (gcc-dg-debug-runtest): Delete -gcoff. * lib/gfortran-dg.exp (gfortran-dg-debug-runtest): Delete -gcoff. From-SVN: r254206
2017-10-26This patch adds a new hook that gives the preferred alignment for a static ↵Richard Sandiford1-0/+11
rtx... TARGET_STATIC_RTX_ALIGNMENT This patch adds a new hook that gives the preferred alignment for a static rtx, so that we don't need to query the front end in force_const_mem. 2017-10-26 Richard Sandiford <richard.sandiford@linaro.org> gcc/ * target.def (static_rtx_alignment): New hook. * targhooks.h (default_static_rtx_alignment): Declare. * targhooks.c (default_static_rtx_alignment): New function. * doc/tm.texi.in (TARGET_STATIC_RTX_ALIGNMENT): New hook. * doc/tm.texi: Regenerate. * varasm.c (force_const_mem): Use targetm.static_rtx_alignment instead of targetm.constant_alignment. Remove call to set_mem_attributes. * config/cris/cris.c (TARGET_STATIC_RTX_ALIGNMENT): Redefine. (cris_preferred_mininum_alignment): New function, split out from... (cris_constant_alignment): ...here. (cris_static_rtx_alignment): New function. * config/i386/i386.c (ix86_static_rtx_alignment): New function, split out from... (ix86_constant_alignment): ...here. (TARGET_STATIC_RTX_ALIGNMENT): Redefine. * config/mmix/mmix.c (TARGET_STATIC_RTX_ALIGNMENT): Redefine. (mmix_static_rtx_alignment): New function. * config/spu/spu.c (spu_static_rtx_alignment): New function. (TARGET_STATIC_RTX_ALIGNMENT): Redefine. From-SVN: r254102
2017-10-23Convert STARTING_FRAME_OFFSET to a hookRichard Sandiford3-7/+7
I took the documentation of the FRAME_GROWS_DOWNWARD behaviour from the version that was in most header files, since the one in the manual seemed less clear. The patch deliberately keeps FIRST_PARM_OFFSET(FNDECL) in microblaze_starting_frame_offset; this seems to be a port-local convention and takes advantage of the fact that FIRST_PARM_OFFSET doesn't read FNDECL. 2017-10-23 Richard Sandiford <richard.sandiford@linaro.org> gcc/ * target.def (starting_frame_offset): New hook. * doc/tm.texi (STARTING_FRAME_OFFSET): Remove in favor of... (TARGET_STARTING_FRAME_OFFSET): ...this new hook. * doc/tm.texi.in: Regenerate. * hooks.h (hook_hwi_void_0): Declare. * hooks.c (hook_hwi_void_0): New function. * doc/rtl.texi: Refer to TARGET_STARTING_FRAME_OFFSET instead of STARTING_FRAME_OFFSET. * builtins.c (expand_builtin_setjmp_receiver): Likewise. * reload1.c (reload): Likewise. * cfgexpand.c (expand_used_vars): Use targetm.starting_frame_offset instead of STARTING_FRAME_OFFSET. * function.c (try_fit_stack_local): Likewise. (assign_stack_local_1): Likewise (instantiate_virtual_regs): Likewise. * rtlanal.c (rtx_addr_can_trap_p_1): Likewise. * config/avr/avr.md (nonlocal_goto_receiver): Likewise. * config/aarch64/aarch64.h (STARTING_FRAME_OFFSET): Delete. * config/alpha/alpha.h (STARTING_FRAME_OFFSET): Likewise. * config/arc/arc.h (STARTING_FRAME_OFFSET): Likewise. * config/arm/arm.h (STARTING_FRAME_OFFSET): Likewise. * config/bfin/bfin.h (STARTING_FRAME_OFFSET): Likewise. * config/c6x/c6x.h (STARTING_FRAME_OFFSET): Likewise. * config/cr16/cr16.h (STARTING_FRAME_OFFSET): Likewise. * config/cris/cris.h (STARTING_FRAME_OFFSET): Likewise. * config/fr30/fr30.h (STARTING_FRAME_OFFSET): Likewise. * config/frv/frv.h (STARTING_FRAME_OFFSET): Likewise. * config/ft32/ft32.h (STARTING_FRAME_OFFSET): Likewise. * config/h8300/h8300.h (STARTING_FRAME_OFFSET): Likewise. * config/i386/i386.h (STARTING_FRAME_OFFSET): Likewise. * config/ia64/ia64.h (STARTING_FRAME_OFFSET): Likewise. * config/m32c/m32c.h (STARTING_FRAME_OFFSET): Likewise. * config/m68k/m68k.h (STARTING_FRAME_OFFSET): Likewise. * config/mcore/mcore.h (STARTING_FRAME_OFFSET): Likewise. * config/mn10300/mn10300.h (STARTING_FRAME_OFFSET): Likewise. * config/moxie/moxie.h (STARTING_FRAME_OFFSET): Likewise. * config/msp430/msp430.h (STARTING_FRAME_OFFSET): Likewise. * config/nds32/nds32.h (STARTING_FRAME_OFFSET): Likewise. * config/nios2/nios2.h (STARTING_FRAME_OFFSET): Likewise. * config/nvptx/nvptx.h (STARTING_FRAME_OFFSET): Likewise. * config/pdp11/pdp11.h (STARTING_FRAME_OFFSET): Likewise. * config/riscv/riscv.h (STARTING_FRAME_OFFSET): Likewise. * config/rl78/rl78.h (STARTING_FRAME_OFFSET): Likewise. * config/rx/rx.h (STARTING_FRAME_OFFSET): Likewise. * config/s390/s390.h (STARTING_FRAME_OFFSET): Likewise. * config/sh/sh.h (STARTING_FRAME_OFFSET): Likewise. * config/sparc/sparc.c (sparc_compute_frame_size): Likewise. * config/sparc/sparc.h (STARTING_FRAME_OFFSET): Likewise. * config/spu/spu.h (STARTING_FRAME_OFFSET): Likewise. * config/stormy16/stormy16.h (STARTING_FRAME_OFFSET): Likewise. * config/tilegx/tilegx.h (STARTING_FRAME_OFFSET): Likewise. * config/tilepro/tilepro.h (STARTING_FRAME_OFFSET): Likewise. * config/v850/v850.h (STARTING_FRAME_OFFSET): Likewise. * config/visium/visium.h (STARTING_FRAME_OFFSET): Likewise. * config/avr/avr.h (STARTING_FRAME_OFFSET): Likewise. * config/avr/avr-protos.h (avr_starting_frame_offset): Likewise. * config/avr/avr.c (avr_starting_frame_offset): Make static and return a HOST_WIDE_INT. (avr_builtin_setjmp_frame_value): Use it instead of STARTING_FRAME_OFFSET. (TARGET_STARTING_FRAME_OFFSET): Redefine. * config/epiphany/epiphany.h (STARTING_FRAME_OFFSET): Delete. * config/epiphany/epiphany.c (epiphany_starting_frame_offset): New function. (TARGET_STARTING_FRAME_OFFSET): Redefine. * config/iq2000/iq2000.h (STARTING_FRAME_OFFSET): Delete. * config/iq2000/iq2000.c (iq2000_starting_frame_offset): New function. (TARGET_CONSTANT_ALIGNMENT): Redefine. * config/lm32/lm32.h (STARTING_FRAME_OFFSET): Delete. * config/lm32/lm32.c (lm32_starting_frame_offset): New function. (TARGET_STARTING_FRAME_OFFSET): Redefine. * config/m32r/m32r.h (STARTING_FRAME_OFFSET): Delete. * config/m32r/m32r.c (m32r_starting_frame_offset): New function. (TARGET_STARTING_FRAME_OFFSET): Redefine. * config/microblaze/microblaze.h (STARTING_FRAME_OFFSET): Delete. * config/microblaze/microblaze.c (microblaze_starting_frame_offset): New function. (TARGET_STARTING_FRAME_OFFSET): Redefine. * config/mips/mips.h (STARTING_FRAME_OFFSET): Delete. * config/mips/mips.c (mips_compute_frame_info): Refer to TARGET_STARTING_FRAME_OFFSET instead of STARTING_FRAME_OFFSET. (mips_starting_frame_offset): New function. (TARGET_STARTING_FRAME_OFFSET): Redefine. * config/mmix/mmix.h (STARTING_FRAME_OFFSET): Delete. * config/mmix/mmix-protos.h (mmix_starting_frame_offset): Delete. * config/mmix/mmix.c (mmix_starting_frame_offset): Make static and return a HOST_WIDE_INT. (TARGET_STARTING_FRAME_OFFSET): Redefine. (mmix_initial_elimination_offset): Refer to TARGET_STARTING_FRAME_OFFSET instead of STARTING_FRAME_OFFSET. * config/pa/pa.h (STARTING_FRAME_OFFSET): Delete. * config/pa/pa.c (pa_starting_frame_offset): New function. (pa_compute_frame_size): Use it instead of STARTING_FRAME_OFFSET. (pa_expand_prologue): Likewise. (TARGET_STARTING_FRAME_OFFSET): Redefine. * config/powerpcspe/aix.h (STARTING_FRAME_OFFSET): Split out !FRAME_GROWS_DOWNWARD handling to... (RS6000_STARTING_FRAME_OFFSET): ...this new macro. * config/powerpcspe/darwin.h (STARTING_FRAME_OFFSET): Split out !FRAME_GROWS_DOWNWARD handling to... (RS6000_STARTING_FRAME_OFFSET): ...this new macro. * config/powerpcspe/powerpcspe.h (STARTING_FRAME_OFFSET): Split out !FRAME_GROWS_DOWNWARD handling to... (RS6000_STARTING_FRAME_OFFSET): ...this new macro. * config/powerpcspe/powerpcspe.c (TARGET_STARTING_FRAME_OFFSET): Redefine. (rs6000_starting_frame_offset): New function. * config/rs6000/aix.h (STARTING_FRAME_OFFSET): Split out !FRAME_GROWS_DOWNWARD handling to... (RS6000_STARTING_FRAME_OFFSET): ...this new macro. * config/rs6000/darwin.h (STARTING_FRAME_OFFSET): Split out !FRAME_GROWS_DOWNWARD handling to... (RS6000_STARTING_FRAME_OFFSET): ...this new macro. * config/rs6000/rs6000.h (STARTING_FRAME_OFFSET): Split out !FRAME_GROWS_DOWNWARD handling to... (RS6000_STARTING_FRAME_OFFSET): ...this new macro. * config/rs6000/rs6000.c (TARGET_STARTING_FRAME_OFFSET): Refine. (rs6000_starting_frame_offset): New function. * config/vax/elf.h (STARTING_FRAME_OFFSET): Delete. * config/vax/vax.h (STARTING_FRAME_OFFSET): Delete. * config/vax/vax.c (vax_starting_frame_offset): New function. (vax_expand_prologue): Use it instead of STARTING_FRAME_OFFSET. (TARGET_STARTING_FRAME_OFFSET): Redefine. * config/xtensa/xtensa.h (STARTING_FRAME_OFFSET): Delete. * config/xtensa/xtensa.c (xtensa_starting_frame_offset): New function. (TARGET_STARTING_FRAME_OFFSET): Redefine. * system.h (STARTING_FRAME_OFFSET): Poison. From-SVN: r254003
2017-09-25Turn CONSTANT_ALIGNMENT into a hookRichard Sandiford3-7/+7
The definition: #define CONSTANT_ALIGNMENT(EXP, ALIGN) \ (TREE_CODE (EXP) == STRING_CST \ && (ALIGN) < BITS_PER_WORD ? BITS_PER_WORD : (ALIGN)) was very common, so the patch adds a canned definition for that, called constant_alignment_word_strings. Some ports had a variation that used a port-local FASTEST_ALIGNMENT instead of BITS_PER_WORD; the patch uses constant_alignment_word_strings if FASTEST_ALIGNMENT was always BITS_PER_WORD and a port-local hook function otherwise. 2017-09-25 Richard Sandiford <richard.sandiford@linaro.org> gcc/ * target.def (constant_alignment): New hook. * defaults.h (CONSTANT_ALIGNMENT): Delete. * doc/tm.texi.in (CONSTANT_ALIGNMENT): Replace with... (TARGET_CONSTANT_ALIGNMENT): ...this new hook. * doc/tm.texi: Regenerate. * targhooks.h (default_constant_alignment): Declare. (constant_alignment_word_strings): Likewise. * targhooks.c (default_constant_alignment): New function. (constant_alignment_word_strings): Likewise. * builtins.c (get_object_alignment_2): Use targetm.constant_alignment instead of CONSTANT_ALIGNMENT. * varasm.c (align_variable, get_variable_align, build_constant_desc) (force_const_mem): Likewise. * config/aarch64/aarch64.h (CONSTANT_ALIGNMENT): Delete. * config/aarch64/aarch64.c (aarch64_constant_alignment): New function. (aarch64_classify_address): Call it instead of CONSTANT_ALIGNMENT. (TARGET_CONSTANT_ALIGNMENT): Redefine. * config/alpha/alpha.h (CONSTANT_ALIGNMENT): Delete commented-out definition. * config/arc/arc.h (CONSTANT_ALIGNMENT): Delete. * config/arc/arc.c (TARGET_CONSTANT_ALIGNMENT): Redefine to constant_alignment_word_strings. * config/arm/arm.h (CONSTANT_ALIGNMENT_FACTOR): Delete. (CONSTANT_ALIGNMENT): Likewise. * config/arm/arm.c (TARGET_CONSTANT_ALIGNMENT): Redefine. (arm_constant_alignment): New function. * config/bfin/bfin.h (CONSTANT_ALIGNMENT): Delete. * config/bfin/bfin.c (TARGET_CONSTANT_ALIGNMENT): Redefine to constant_alignment_word_strings. * config/cr16/cr16.h (CONSTANT_ALIGNMENT): Delete. * config/cr16/cr16.c (TARGET_CONSTANT_ALIGNMENT): Redefine to constant_alignment_word_strings. * config/cris/cris.h (CONSTANT_ALIGNMENT): Delete. * config/cris/cris.c (TARGET_CONSTANT_ALIGNMENT): Redefine. (cris_constant_alignment): New function. * config/epiphany/epiphany.h (CONSTANT_ALIGNMENT): Delete. * config/epiphany/epiphany.c (TARGET_CONSTANT_ALIGNMENT): Redefine. (epiphany_constant_alignment): New function. * config/fr30/fr30.h (CONSTANT_ALIGNMENT): Delete. * config/fr30/fr30.c (TARGET_CONSTANT_ALIGNMENT): Redefine to constant_alignment_word_strings. * config/frv/frv.h (CONSTANT_ALIGNMENT): Delete. * config/frv/frv.c (TARGET_CONSTANT_ALIGNMENT): Redefine to constant_alignment_word_strings. * config/ft32/ft32.h (CONSTANT_ALIGNMENT): Delete. * config/ft32/ft32.c (TARGET_CONSTANT_ALIGNMENT): Redefine to constant_alignment_word_strings. * config/i386/i386.h (CONSTANT_ALIGNMENT): Delete. * config/i386/i386-protos.h (ix86_constant_alignment): Delete. * config/i386/i386.c (ix86_constant_alignment): Make static. Use the same interface as the target hook. (TARGET_CONSTANT_ALIGNMENT): Redefine. * config/ia64/ia64.h (CONSTANT_ALIGNMENT): Delete. * config/ia64/ia64.c (TARGET_CONSTANT_ALIGNMENT): Redefine to constant_alignment_word_strings. * config/iq2000/iq2000.h (CONSTANT_ALIGNMENT): Delete. * config/iq2000/iq2000.c (iq2000_constant_alignment): New function. (TARGET_CONSTANT_ALIGNMENT): Redefine. * config/lm32/lm32.h (CONSTANT_ALIGNMENT): Delete. * config/lm32/lm32.c (TARGET_CONSTANT_ALIGNMENT): Redefine to constant_alignment_word_strings. * config/m32r/m32r.h (CONSTANT_ALIGNMENT): Delete. * config/m32r/m32r.c (TARGET_CONSTANT_ALIGNMENT): Redefine to constant_alignment_word_strings. * config/mcore/mcore.h (CONSTANT_ALIGNMENT): Delete. * config/mcore/mcore.c (TARGET_CONSTANT_ALIGNMENT): Redefine to constant_alignment_word_strings. * config/microblaze/microblaze.h (CONSTANT_ALIGNMENT): Delete. * config/microblaze/microblaze.c (microblaze_constant_alignment): New function. (TARGET_CONSTANT_ALIGNMENT): Redefine. * config/mips/mips.h (CONSTANT_ALIGNMENT): Delete. * config/mips/mips.c (mips_constant_alignment): New function. (TARGET_CONSTANT_ALIGNMENT): Redefine. * config/mmix/mmix.h (CONSTANT_ALIGNMENT): Delete. * config/mmix/mmix-protos.h (mmix_constant_alignment): Delete. * config/mmix/mmix.c (TARGET_CONSTANT_ALIGNMENT): Redefine. (mmix_constant_alignment): Make static. Use the same interface as the target hook. * config/moxie/moxie.h (CONSTANT_ALIGNMENT): Delete. * config/moxie/moxie.c (TARGET_CONSTANT_ALIGNMENT): Redefine to constant_alignment_word_strings. * config/nios2/nios2.h (CONSTANT_ALIGNMENT): Delete. * config/nios2/nios2.c (TARGET_CONSTANT_ALIGNMENT): Redefine to constant_alignment_word_strings. * config/pa/pa.h (CONSTANT_ALIGNMENT): Delete. * config/pa/pa.c (TARGET_CONSTANT_ALIGNMENT): Redefine to constant_alignment_word_strings. * config/powerpcspe/powerpcspe.h (CONSTANT_ALIGNMENT): Delete. * config/powerpcspe/powerpcspe.c (TARGET_CONSTANT_ALIGNMENT): Redefine. (rs6000_constant_alignment): New function. * config/riscv/riscv.h (CONSTANT_ALIGNMENT): Delete. * config/riscv/riscv.c (riscv_constant_alignment): New function. (TARGET_CONSTANT_ALIGNMENT): Redefine. * config/rs6000/rs6000.h (CONSTANT_ALIGNMENT): Delete. * config/rs6000/rs6000.c (TARGET_CONSTANT_ALIGNMENT): Redefine. (rs6000_constant_alignment): New function. * config/s390/s390.h (CONSTANT_ALIGNMENT): Delete. * config/s390/s390.c (s390_constant_alignment): New function. (TARGET_CONSTANT_ALIGNMENT): Redefine. * config/sh/sh.h (CONSTANT_ALIGNMENT): Delete. * config/sh/sh.c (TARGET_CONSTANT_ALIGNMENT): Redefine to constant_alignment_word_strings. * config/sparc/sparc.h (CONSTANT_ALIGNMENT): Delete. * config/sparc/sparc.c (TARGET_CONSTANT_ALIGNMENT): Redefine. (sparc_constant_alignment): New function. * config/spu/spu.h (CONSTANT_ALIGNMENT): Delete. * config/spu/spu.c (spu_constant_alignment): New function. (TARGET_CONSTANT_ALIGNMENT): Redefine. * config/stormy16/stormy16.h (CONSTANT_ALIGNMENT): Delete. * config/stormy16/stormy16.c (TARGET_CONSTANT_ALIGNMENT): Redefine to constant_alignment_word_strings. * config/tilegx/tilegx.h (CONSTANT_ALIGNMENT): Delete. * config/tilegx/tilegx.c (TARGET_CONSTANT_ALIGNMENT): Redefine to constant_alignment_word_strings. * config/tilepro/tilepro.h (CONSTANT_ALIGNMENT): Delete. * config/tilepro/tilepro.c (TARGET_CONSTANT_ALIGNMENT): Redefine to constant_alignment_word_strings. * config/visium/visium.h (CONSTANT_ALIGNMENT): Delete. * config/visium/visium.c (TARGET_CONSTANT_ALIGNMENT): Redefine. (visium_constant_alignment): New function. * config/xtensa/xtensa.h (CONSTANT_ALIGNMENT): Delete. * config/xtensa/xtensa.c (TARGET_CONSTANT_ALIGNMENT): Redefine. (xtensa_constant_alignment): New function. * system.h (CONSTANT_ALIGNMENT): Poison. From-SVN: r253154
2017-09-15Turn TRULY_NOOP_TRUNCATION into a hookRichard Sandiford1-2/+0
I'm not sure the documentation is correct that outprec is always less than inprec, and each non-default implementation tested for the case in which it wasn't, but the patch leaves it as-is. The SH port had a couple of TRULY_NOOP_TRUNCATION tests that were left over from the old shmedia port. 2017-09-13 Richard Sandiford <richard.sandiford@linaro.org> Alan Hayard <alan.hayward@arm.com> David Sherwood <david.sherwood@arm.com> gcc/ * target.def (truly_noop_truncation): New hook. (mode_rep_extended): Refer to TARGET_TRULY_NOOP_TRUNCATION rather than TRULY_NOOP_TRUNCATION. * hooks.h (hook_bool_uint_uint_true): Declare. * hooks.c (hook_bool_uint_uint_true): New function. * doc/tm.texi.in (TRULY_NOOP_TRUNCATION): Replace with... (TARGET_TRULY_NOOP_TRUNCATION): ...this. * doc/tm.texi: Regenerate. * combine.c (make_extraction): Refer to TARGET_TRULY_NOOP_TRUNCATION rather than TRULY_NOOP_TRUNCATION in comments. (simplify_comparison): Likewise. (record_truncated_value): Likewise. * expmed.c (extract_bit_field_1): Likewise. (extract_split_bit_field): Likewise. * convert.c (convert_to_integer_1): Use targetm.truly_noop_truncation instead of TRULY_NOOP_TRUNCATION. * function.c (assign_parm_setup_block): Likewise. * machmode.h (TRULY_NOOP_TRUNCATION_MODES_P): Likewise. * rtlhooks.c: Include target.h. * config/aarch64/aarch64.h (TRULY_NOOP_TRUNCATION): Delete. * config/alpha/alpha.h (TRULY_NOOP_TRUNCATION): Delete. * config/arc/arc.h (TRULY_NOOP_TRUNCATION): Delete. * config/arm/arm.h (TRULY_NOOP_TRUNCATION): Delete. * config/avr/avr.h (TRULY_NOOP_TRUNCATION): Delete. * config/bfin/bfin.h (TRULY_NOOP_TRUNCATION): Delete. * config/c6x/c6x.h (TRULY_NOOP_TRUNCATION): Delete. * config/cr16/cr16.h (TRULY_NOOP_TRUNCATION): Delete. * config/cris/cris.h (TRULY_NOOP_TRUNCATION): Delete. * config/epiphany/epiphany.h (TRULY_NOOP_TRUNCATION): Delete. * config/fr30/fr30.h (TRULY_NOOP_TRUNCATION): Delete. * config/frv/frv.h (TRULY_NOOP_TRUNCATION): Delete. * config/ft32/ft32.h (TRULY_NOOP_TRUNCATION): Delete. * config/h8300/h8300.h (TRULY_NOOP_TRUNCATION): Delete. * config/i386/i386.h (TRULY_NOOP_TRUNCATION): Delete. * config/ia64/ia64.h (TRULY_NOOP_TRUNCATION): Delete. * config/iq2000/iq2000.h (TRULY_NOOP_TRUNCATION): Delete. * config/lm32/lm32.h (TRULY_NOOP_TRUNCATION): Delete. * config/m32c/m32c.h (TRULY_NOOP_TRUNCATION): Delete. * config/m32r/m32r.h (TRULY_NOOP_TRUNCATION): Delete. * config/m68k/m68k.h (TRULY_NOOP_TRUNCATION): Delete. * config/mcore/mcore.h (TRULY_NOOP_TRUNCATION): Delete. * config/microblaze/microblaze.h (TRULY_NOOP_TRUNCATION): Delete. * config/mips/mips.h (TRULY_NOOP_TRUNCATION): Delete. * config/mips/mips.c (mips_truly_noop_truncation): New function. (TARGET_TRULY_NOOP_TRUNCATION): Redefine. * config/mips/mips.md: Refer to TARGET_TRULY_NOOP_TRUNCATION rather than TRULY_NOOP_TRUNCATION in comments. * config/mmix/mmix.h (TRULY_NOOP_TRUNCATION): Delete. * config/mn10300/mn10300.h (TRULY_NOOP_TRUNCATION): Delete. * config/moxie/moxie.h (TRULY_NOOP_TRUNCATION): Delete. * config/msp430/msp430.h (TRULY_NOOP_TRUNCATION): Delete. * config/nds32/nds32.h (TRULY_NOOP_TRUNCATION): Delete. * config/nios2/nios2.h (TRULY_NOOP_TRUNCATION): Delete. * config/nvptx/nvptx.h (TRULY_NOOP_TRUNCATION): Delete. * config/pa/pa.h (TRULY_NOOP_TRUNCATION): Delete. * config/pdp11/pdp11.h (TRULY_NOOP_TRUNCATION): Delete. * config/powerpcspe/powerpcspe.h (TRULY_NOOP_TRUNCATION): Delete. * config/riscv/riscv.h (TRULY_NOOP_TRUNCATION): Delete. * config/riscv/riscv.md: Refer to TARGET_TRULY_NOOP_TRUNCATION rather than TRULY_NOOP_TRUNCATION in comments. * config/rl78/rl78.h (TRULY_NOOP_TRUNCATION): Delete. * config/rs6000/rs6000.h (TRULY_NOOP_TRUNCATION): Delete. * config/rx/rx.h (TRULY_NOOP_TRUNCATION): Delete. * config/s390/s390.h (TRULY_NOOP_TRUNCATION): Delete. * config/sh/sh.h (MAYBE_BASE_REGISTER_RTX_P): Remove TRULY_NOOP_TRUNCATION condition. (MAYBE_INDEX_REGISTER_RTX_P): Likewise. (TRULY_NOOP_TRUNCATION): Delete. * config/sparc/sparc.h (TRULY_NOOP_TRUNCATION): Delete. * config/spu/spu.h (TRULY_NOOP_TRUNCATION): Delete. * config/spu/spu.c (spu_truly_noop_truncation): New function. (TARGET_TRULY_NOOP_TRUNCATION): Redefine. * config/stormy16/stormy16.h (TRULY_NOOP_TRUNCATION): Delete. * config/tilegx/tilegx.h (TRULY_NOOP_TRUNCATION): Delete. * config/tilegx/tilegx.c (tilegx_truly_noop_truncation): New fuction. (TARGET_TRULY_NOOP_TRUNCATION): Redefine. * config/tilegx/tilegx.md: Refer to TARGET_TRULY_NOOP_TRUNCATION rather than TRULY_NOOP_TRUNCATION in comments. * config/tilepro/tilepro.h (TRULY_NOOP_TRUNCATION): Delete. * config/v850/v850.h (TRULY_NOOP_TRUNCATION): Delete. * config/vax/vax.h (TRULY_NOOP_TRUNCATION): Delete. * config/visium/visium.h (TRULY_NOOP_TRUNCATION): Delete. * config/xtensa/xtensa.h (TRULY_NOOP_TRUNCATION): Delete. * system.h (TRULY_NOOP_TRUNCATION): Poison. Co-Authored-By: Alan Hayward <alan.hayward@arm.com> Co-Authored-By: David Sherwood <david.sherwood@arm.com> From-SVN: r252818
2017-09-13Turn SECONDARY_MEMORY_NEEDED into a hookRichard Sandiford1-1/+1
Since the patch is going through all the definitions anyway, it seemed like a good opportunity to put the mode argument first, to match the order for register_move_cost. 2017-09-13 Richard Sandiford <richard.sandiford@linaro.org> Alan Hayward <alan.hayward@arm.com> David Sherwood <david.sherwood@arm.com> gcc/ * target.def (secondary_memory_needed): New hook. (secondary_reload): Refer to TARGET_SECONDARY_MEMORY_NEEDED instead of SECONDARY_MEMORY_NEEDED. (secondary_memory_needed_mode): Likewise. * hooks.h (hook_bool_mode_reg_class_t_reg_class_t_false): Declare. * hooks.c (hook_bool_mode_reg_class_t_reg_class_t_false): New function. * doc/tm.texi.in (SECONDARY_MEMORY_NEEDED): Replace with... (TARGET_SECONDARY_MEMORY_NEEDED): ...this. (SECONDARY_MEMORY_NEEDED_RTX): Update reference accordingly. * doc/tm.texi: Regenerate. * config/alpha/alpha.h (SECONDARY_MEMORY_NEEDED): Delete. * config/alpha/alpha.c (alpha_secondary_memory_needed): New function. (TARGET_SECONDARY_MEMORY_NEEDED): Redefine. * config/i386/i386.h (SECONDARY_MEMORY_NEEDED): Delete. * config/i386/i386-protos.h (ix86_secondary_memory_needed): Delete. * config/i386/i386.c (inline_secondary_memory_needed): Put the mode argument first and change the reg_class arguments to reg_class_t. (ix86_secondary_memory_needed): Likewise. Remove the strict parameter. Make static. Update the call to inline_secondary_memory_needed. (ix86_register_move_cost): Update the call to inline_secondary_memory_needed. (TARGET_SECONDARY_MEMORY_NEEDED): Redefine. * config/ia64/ia64.h (SECONDARY_MEMORY_NEEDED): Delete commented-out definition. * config/ia64/ia64.c (spill_xfmode_rfmode_operand): Refer to TARGET_SECONDARY_MEMORY_NEEDED rather than SECONDARY_MEMORY_NEEDED in comment. * config/mips/mips.h (SECONDARY_MEMORY_NEEDED): Delete. * config/mips/mips-protos.h (mips_secondary_memory_needed): Delete. * config/mips/mips.c (mips_secondary_memory_needed): Make static and match hook interface. Add comment from mips.h. (TARGET_SECONDARY_MEMORY_NEEDED): Redefine. * config/mmix/mmix.md (truncdfsf2): Refer to TARGET_SECONDARY_MEMORY_NEEDED rather than SECONDARY_MEMORY_NEEDED in comment. * config/pa/pa-64.h (SECONDARY_MEMORY_NEEDED): Rename to... (PA_SECONDARY_MEMORY_NEEDED): ...this, and put the mode argument first. * config/pa/pa.c (TARGET_SECONDARY_MEMORY_NEEDED): Redefine. (pa_secondary_memory_needed): New function. * config/pdp11/pdp11.h (SECONDARY_MEMORY_NEEDED): Delete. * config/pdp11/pdp11-protos.h (pdp11_secondary_memory_needed): Delete. * config/pdp11/pdp11.c (TARGET_SECONDARY_MEMORY_NEEDED): Redefine. (pdp11_secondary_memory_needed): Make static and match hook interface. * config/powerpcspe/powerpcspe.h (SECONDARY_MEMORY_NEEDED): Delete. * config/powerpcspe/powerpcspe-protos.h (rs6000_secondary_memory_needed_ptr): Delete. * config/powerpcspe/powerpcspe.c (rs6000_secondary_memory_needed_ptr): Delete. (TARGET_SECONDARY_MEMORY_NEEDED): Redefine. (rs6000_option_override_internal): Assign to targetm.secondary_memory_needed rather than rs6000_secondary_memory_needed_ptr. (rs6000_secondary_memory_needed): Match hook interface. (rs6000_debug_secondary_memory_needed): Likewise. * config/riscv/riscv.h (SECONDARY_MEMORY_NEEDED): Delete. * config/riscv/riscv.c (riscv_secondary_memory_needed): New function. (riscv_register_move_cost): Use it instead of SECONDARY_MEMORY_NEEDED. (TARGET_SECONDARY_MEMORY_NEEDED): Redefine. * config/rs6000/rs6000.h (SECONDARY_MEMORY_NEEDED): Delete. * config/rs6000/rs6000-protos.h (rs6000_secondary_memory_needed_ptr): Delete. * config/rs6000/rs6000.c (rs6000_secondary_memory_needed_ptr): Delete. (TARGET_SECONDARY_MEMORY_NEEDED): Redefine. (rs6000_option_override_internal): Assign to targetm.secondary_memory_needed rather than rs6000_secondary_memory_needed_ptr. (rs6000_secondary_memory_needed): Match hook interface. (rs6000_debug_secondary_memory_needed): Likewise. * config/s390/s390.h (SECONDARY_MEMORY_NEEDED): Delete. * config/s390/s390.c (s390_secondary_memory_needed): New function. (TARGET_SECONDARY_MEMORY_NEEDED): Redefine. * config/sparc/sparc.h (SECONDARY_MEMORY_NEEDED): Delete. * config/sparc/sparc.c (TARGET_SECONDARY_MEMORY_NEEDED): Redefine. (sparc_secondary_memory_needed): New function. * lra-constraints.c (check_and_process_move): Refer to TARGET_SECONDARY_MEMORY_NEEDED rather than SECONDARY_MEMORY_NEEDED in comment. (curr_insn_transform): Likewise. (process_alt_operands): Use targetm.secondary_memory_needed instead of TARGET_SECONDARY_MEMORY_NEEDED. (check_secondary_memory_needed_p): Likewise. (choose_split_class): Likewise. * reload.c: Unconditionally include code that was previously conditional on SECONDARY_MEMORY_NEEDED. (push_secondary_reload): Use targetm.secondary_memory_needed instead of TARGET_SECONDARY_MEMORY_NEEDED. (push_reload): Likewise. * reload1.c: Unconditionally include code that was previously conditional on SECONDARY_MEMORY_NEEDED. (choose_reload_regs): Use targetm.secondary_memory_needed instead of TARGET_SECONDARY_MEMORY_NEEDED. (gen_reload): Likewise. * system.h (SECONDARY_MEMORY_NEEDED): Poison. Co-Authored-By: Alan Hayward <alan.hayward@arm.com> Co-Authored-By: David Sherwood <david.sherwood@arm.com> From-SVN: r252461
2017-09-12Turn HARD_REGNO_NREGS into a target hookRichard Sandiford1-7/+1
2017-09-12 Richard Sandiford <richard.sandiford@linaro.org> Alan Hayward <alan.hayward@arm.com> David Sherwood <david.sherwood@arm.com> gcc/ * target.def (hard_regno_nregs): New hook. (class_max_nregs): Refer to it instead of HARD_REGNO_NREGS. * targhooks.h (default_hard_regno_nregs): Declare. * targhooks.c (default_hard_regno_nregs): New function. * doc/tm.texi.in (HARD_REGNO_NREGS): Replace with... (TARGET_HARD_REGNO_NREGS): ...this hook. (HARD_REGNO_NREGS_HAS_PADDING): Update accordingly. (CLASS_MAX_NREGS): Likewise. * doc/tm.texi: Regenerate. * reginfo.c (init_reg_modes_target): Use targetm.hard_regno_nregs instead of HARD_REGNO_NREGS. * rtl.h (REG_NREGS): Refer to TARGET_HARD_REGNO_NREGS rather than HARD_REGNO_NREGS in the comment. * config/aarch64/aarch64.h (HARD_REGNO_NREGS): Delete. * config/aarch64/aarch64-protos.h (aarch64_hard_regno_nregs): Delete. * config/aarch64/aarch64.c (aarch64_hard_regno_nregs): Make static. Return an unsigned int. (TARGET_HARD_REGNO_NREGS): Redefine. * config/alpha/alpha.h (HARD_REGNO_NREGS): Delete. * config/arc/arc.h (HARD_REGNO_NREGS): Delete. * config/arc/arc.c (TARGET_HARD_REGNO_NREGS): Redefine. (arc_hard_regno_nregs): New function. * config/arm/arm.h (HARD_REGNO_NREGS): Delete. * config/arm/arm.c (TARGET_HARD_REGNO_NREGS): Redefine. (arm_hard_regno_nregs): New function. * config/avr/avr.h (HARD_REGNO_NREGS): Delete. * config/bfin/bfin.h (HARD_REGNO_NREGS): Delete. * config/bfin/bfin.c (bfin_hard_regno_nregs): New function. (TARGET_HARD_REGNO_NREGS): Redefine. * config/c6x/c6x.h (HARD_REGNO_NREGS): Delete. * config/cr16/cr16.h (LONG_REG_P): Use targetm.hard_regno_nregs. (HARD_REGNO_NREGS): Delete. * config/cr16/cr16.c (TARGET_HARD_REGNO_NREGS): Redefine. (cr16_hard_regno_nregs): New function. (cr16_memory_move_cost): Use it instead of HARD_REGNO_NREGS. * config/cris/cris.h (HARD_REGNO_NREGS): Delete. * config/cris/cris.c (TARGET_HARD_REGNO_NREGS): Redefine. (cris_hard_regno_nregs): New function. * config/epiphany/epiphany.h (HARD_REGNO_NREGS): Delete. * config/fr30/fr30.h (HARD_REGNO_NREGS): Delete. (CLASS_MAX_NREGS): Use targetm.hard_regno_nregs. * config/frv/frv.h (HARD_REGNO_NREGS): Delete. (CLASS_MAX_NREGS): Remove outdated copy of documentation. * config/frv/frv-protos.h (frv_hard_regno_nregs): Delete. * config/frv/frv.c (TARGET_HARD_REGNO_NREGS): Redefine. (frv_hard_regno_nregs): Make static. Take and return an unsigned int. (frv_class_max_nregs): Remove outdated copy of documentation. * config/ft32/ft32.h (HARD_REGNO_NREGS): Delete. * config/h8300/h8300.h (HARD_REGNO_NREGS): Delete. * config/h8300/h8300-protos.h (h8300_hard_regno_nregs): Delete. * config/h8300/h8300.c (h8300_hard_regno_nregs): Delete. * config/i386/i386.h (HARD_REGNO_NREGS): Delete. * config/i386/i386.c (ix86_hard_regno_nregs): New function. (TARGET_HARD_REGNO_NREGS): Redefine. * config/ia64/ia64.h (HARD_REGNO_NREGS): Delete. (CLASS_MAX_NREGS): Update comment. * config/ia64/ia64.c (TARGET_HARD_REGNO_NREGS): Redefine. (ia64_hard_regno_nregs): New function. * config/iq2000/iq2000.h (HARD_REGNO_NREGS): Delete. * config/lm32/lm32.h (HARD_REGNO_NREGS): Delete. * config/m32c/m32c.h (HARD_REGNO_NREGS): Delete. * config/m32c/m32c-protos.h (m32c_hard_regno_nregs): Delete. * config/m32c/m32c.c (m32c_hard_regno_nregs_1): Take and return an unsigned int. (m32c_hard_regno_nregs): Likewise. Make static. (TARGET_HARD_REGNO_NREGS): Redefine. * config/m32r/m32r.h (HARD_REGNO_NREGS): Delete. * config/m68k/m68k.h (HARD_REGNO_NREGS): Delete. * config/m68k/m68k.c (TARGET_HARD_REGNO_NREGS): Redefine. (m68k_hard_regno_nregs): New function. * config/mcore/mcore.h (HARD_REGNO_NREGS): Delete. * config/microblaze/microblaze.h (HARD_REGNO_NREGS): Delete. * config/mips/mips.h (HARD_REGNO_NREGS): Delete. * config/mips/mips-protos.h (mips_hard_regno_nregs): Delete. * config/mips/mips.c (mips_hard_regno_nregs): Make static. Take and return an unsigned int. (TARGET_HARD_REGNO_NREGS): Redefine. * config/mmix/mmix.h (HARD_REGNO_NREGS): Delete. (CLASS_MAX_NREGS): Use targetm.hard_regno_nregs. * config/mn10300/mn10300.h (HARD_REGNO_NREGS): Delete. * config/moxie/moxie.h (HARD_REGNO_NREGS): Delete. * config/msp430/msp430.h (HARD_REGNO_NREGS): Delete. * config/msp430/msp430-protos.h (msp430_hard_regno_nregs): Delete. * config/msp430/msp430.c (TARGET_HARD_REGNO_NREGS): Redefine. (msp430_hard_regno_nregs): Make static. Take and return an unsigned int. * config/nds32/nds32.h (HARD_REGNO_NREGS): Delete. * config/nds32/nds32-protos.h (nds32_hard_regno_nregs): Delete. * config/nds32/nds32.c (nds32_hard_regno_nregs): Delete. (nds32_hard_regno_mode_ok): Use targetm.hard_regno_nregs. * config/nios2/nios2.h (HARD_REGNO_NREGS): Delete. * config/nvptx/nvptx.h (HARD_REGNO_NREGS): Delete. * config/nvptx/nvptx.c (nvptx_hard_regno_nregs): New function. (TARGET_HARD_REGNO_NREGS): Redefine. * config/pa/pa32-regs.h (HARD_REGNO_NREGS): Rename to... (PA_HARD_REGNO_NREGS): ...this. * config/pa/pa64-regs.h (HARD_REGNO_NREGS): Rename to... (PA_HARD_REGNO_NREGS): ...this. * config/pa/pa.c (TARGET_HARD_REGNO_NREGS): Redefine. (pa_hard_regno_nregs): New function. * config/pdp11/pdp11.h (HARD_REGNO_NREGS): Delete. * config/pdp11/pdp11.c (TARGET_HARD_REGNO_NREGS): Redefine. (pdp11_hard_regno_nregs): New function. * config/powerpcspe/powerpcspe.h (HARD_REGNO_NREGS): Delete. * config/powerpcspe/powerpcspe.c (TARGET_HARD_REGNO_NREGS): Redefine. (rs6000_hard_regno_nregs_hook): New function. * config/riscv/riscv.h (HARD_REGNO_NREGS): Delete. * config/riscv/riscv-protos.h (riscv_hard_regno_nregs): Delete. * config/riscv/riscv.c (riscv_hard_regno_nregs): Make static. Take and return an unsigned int. Move earlier in file. (TARGET_HARD_REGNO_NREGS): Redefine. * config/rl78/rl78.h (HARD_REGNO_NREGS): Delete. * config/rl78/rl78-protos.h (rl78_hard_regno_nregs): Delete. * config/rl78/rl78.c (TARGET_HARD_REGNO_NREGS): Reefine. (rl78_hard_regno_nregs): Make static. Take and return an unsigned int. * config/rs6000/rs6000.h (HARD_REGNO_NREGS): Delete. * config/rs6000/rs6000.c (TARGET_HARD_REGNO_NREGS): Redefine. (rs6000_hard_regno_nregs_hook): New function. * config/rx/rx.h (HARD_REGNO_NREGS): Delete. * config/rx/rx.c (rx_hard_regno_nregs): New function. (TARGET_HARD_REGNO_NREGS): Redefine. * config/s390/s390.h (HARD_REGNO_NREGS): Delete. * config/s390/s390.c (REGNO_PAIR_OK): Use s390_hard_regno_nregs instead of HARD_REGNO_NREGS. (s390_hard_regno_nregs): New function. (s390_hard_regno_mode_ok): Add comment from s390.h. (TARGET_HARD_REGNO_NREGS): Redefine. * config/sh/sh.h (HARD_REGNO_NREGS): Delete. * config/sh/sh.c (TARGET_HARD_REGNO_NREGS): Redefine. (sh_hard_regno_nregs): New function. (sh_pass_in_reg_p): Use it. * config/sparc/sparc.h (HARD_REGNO_NREGS): Delete. * config/sparc/sparc.c (TARGET_HARD_REGNO_NREGS): Redefine. (sparc_hard_regno_nregs): New function. * config/spu/spu.h (HARD_REGNO_NREGS): Delete. * config/spu/spu.c (spu_hard_regno_nregs): New function. (spu_function_arg_advance): Use it, supplying a valid register number. (TARGET_HARD_REGNO_NREGS): Redefine. * config/stormy16/stormy16.h (HARD_REGNO_NREGS): Delete. * config/tilegx/tilegx.h (HARD_REGNO_NREGS): Delete. * config/tilepro/tilepro.h (HARD_REGNO_NREGS): Delete. * config/v850/v850.h (HARD_REGNO_NREGS): Delete. * config/vax/vax.h (HARD_REGNO_NREGS): Delete. * config/visium/visium.h (HARD_REGNO_NREGS): Delete. (CLASS_MAX_NREGS): Remove copy of old documentation. * config/visium/visium.c (TARGET_HARD_REGNO_NREGS): Redefine. (visium_hard_regno_nregs): New function. (visium_hard_regno_mode_ok): Use it instead of HARD_REGNO_NREGS. * config/xtensa/xtensa.h (HARD_REGNO_NREGS): Delete. * config/xtensa/xtensa.c (TARGET_HARD_REGNO_NREGS): Redefine. xtensa_hard_regno_nregs): New function. * system.h (HARD_REGNO_NREGS): Poison. Co-Authored-By: Alan Hayward <alan.hayward@arm.com> Co-Authored-By: David Sherwood <david.sherwood@arm.com> From-SVN: r252016
2017-09-04Turn MODES_TIEABLE_P into a target hookRichard Sandiford1-6/+0
2017-09-04 Richard Sandiford <richard.sandiford@linaro.org> Alan Hayward <alan.hayward@arm.com> David Sherwood <david.sherwood@arm.com> gcc/ * target.def (modes_tieable_p): New hook. * doc/tm.texi (MODES_TIEABLE_P): Replace with... (TARGET_MODES_TIEABLE_P): ...this. * doc/tm.texi.in: Regenerate. * hooks.h (hook_bool_mode_mode_true): Declare. * hooks.c (hook_bool_mode_mode_true): New function. * combine.c (subst): Use targetm.modes_tieable_p instead of MODES_TIEABLE_P. * dse.c (find_shift_sequence): Likewise. * expmed.c (extract_low_bits): Likewise. * lower-subreg.c: Include target.h. (find_decomposable_subregs): Use targetm.modes_tieable_p instead of MODES_TIEABLE_P. * rtlanal.c (rtx_cost): Likewise. * config/aarch64/aarch64.h (MODES_TIEABLE_P): Delete. * config/aarch64/aarch64-protos.h (aarch64_modes_tieable_p): Delete. * config/aarch64/aarch64.c (aarch64_modes_tieable_p): Make static. (TARGET_MODES_TIEABLE_P): Redefine. * config/alpha/alpha.h (MODES_TIEABLE_P): Delete. * config/alpha/alpha.c (alpha_modes_tieable_p): New function. (TARGET_MODES_TIEABLE_P): Redefine. * config/arc/arc.h (MODES_TIEABLE_P): Delete. * config/arc/arc.c (TARGET_MODES_TIEABLE_P): Redefine. (arc_modes_tieable_p): New function. * config/arm/arm.h (MODES_TIEABLE_P): Delete. * config/arm/arm-protos.h (arm_modes_tieable_p): Delete. * config/arm/arm.c (TARGET_MODES_TIEABLE_P): Redefine. (arm_modes_tieable_p): Make static. * config/avr/avr.h (MODES_TIEABLE_P): Delete. * config/bfin/bfin.h (MODES_TIEABLE_P): Delete. * config/bfin/bfin.c (bfin_modes_tieable_p): New function. (TARGET_MODES_TIEABLE_P): Redefine. * config/c6x/c6x.h (MODES_TIEABLE_P): Delete. * config/c6x/c6x.c (c6x_modes_tieable_p): New function. (TARGET_MODES_TIEABLE_P): Redefine. * config/cr16/cr16.h (MODES_TIEABLE_P): Delete. * config/cr16/cr16.c (TARGET_MODES_TIEABLE_P): Redefine. (cr16_modes_tieable_p): New function. * config/cris/cris.h (MODES_TIEABLE_P): Delete. * config/epiphany/epiphany.h (MODES_TIEABLE_P): Delete. * config/fr30/fr30.h (MODES_TIEABLE_P): Delete. (TRULY_NOOP_TRUNCATION): Update comment. * config/frv/frv.h (MODES_TIEABLE_P): Delete. (TRULY_NOOP_TRUNCATION): Update comment. * config/frv/frv.c (TARGET_MODES_TIEABLE_P): Redefine. (frv_modes_tieable_p): New function. * config/ft32/ft32.h (MODES_TIEABLE_P): Delete. * config/h8300/h8300.h (MODES_TIEABLE_P): Delete. * config/h8300/h8300.c (h8300_modes_tieable_p): New function. (TARGET_MODES_TIEABLE_P): Redefine. * config/i386/i386.h (MODES_TIEABLE_P): Delete. * config/i386/i386-protos.h (ix86_modes_tieable_p): Delete. * config/i386/i386.c (ix86_modes_tieable_p): Make static. (TARGET_MODES_TIEABLE_P): Redefine. * config/ia64/ia64.h (MODES_TIEABLE_P): Delete. * config/ia64/ia64.c (TARGET_MODES_TIEABLE_P): Redefine. (ia64_modes_tieable_p): New function. * config/iq2000/iq2000.h (MODES_TIEABLE_P): Delete. * config/iq2000/iq2000.c (TARGET_MODES_TIEABLE_P): Redefine. (iq2000_modes_tieable_p): New function. * config/lm32/lm32.h (MODES_TIEABLE_P): Delete. * config/lm32/lm32.c (TARGET_MODES_TIEABLE_P): Redefine. (lm32_modes_tieable_p): New function. * config/m32c/m32c.h (MODES_TIEABLE_P): Delete. * config/m32c/m32c-protos.h (m32c_modes_tieable_p): Delete. * config/m32c/m32c.c (m32c_modes_tieable_p): Make static. (TARGET_MODES_TIEABLE_P): Redefine. * config/m32r/m32r.h (MODES_TIEABLE_P): Delete. * config/m32r/m32r.c (TARGET_MODES_TIEABLE_P): Redefine. (m32r_modes_tieable_p): New function. * config/m68k/m68k.h (MODES_TIEABLE_P): Delete. * config/m68k/m68k.c (TARGET_MODES_TIEABLE_P): Redefine. (m68k_modes_tieable_p): New function. * config/mcore/mcore.h (MODES_TIEABLE_P): Delete. * config/mcore/mcore.c (TARGET_MODES_TIEABLE_P): Redefine. (mcore_modes_tieable_p): New function. * config/microblaze/microblaze.h (MODES_TIEABLE_P): Delete. * config/microblaze/microblaze.c (microblaze_modes_tieable_p): New function. (TARGET_MODES_TIEABLE_P): Redefine. * config/mips/mips.h (MODES_TIEABLE_P): Delete. * config/mips/mips-protos.h (mips_modes_tieable_p): Delete. * config/mips/mips.c (mips_modes_tieable_p): Make static. (TARGET_MODES_TIEABLE_P): Redefine. * config/mmix/mmix.h (MODES_TIEABLE_P): Delete. * config/mn10300/mn10300.h (MODES_TIEABLE_P): Delete. * config/mn10300/mn10300-protos.h (mn10300_modes_tieable): Delete. * config/mn10300/mn10300.c (mn10300_modes_tieable): Rename to... (mn10300_modes_tieable_p): ...this and make static. (TARGET_MODES_TIEABLE_P): Redefine. * config/moxie/moxie.h (MODES_TIEABLE_P): Delete. * config/msp430/msp430.h (MODES_TIEABLE_P): Delete. * config/msp430/msp430-protos.h (msp430_modes_tieable_p): Delete. * config/msp430/msp430.c (TARGET_MODES_TIEABLE_P): Redefine. (msp430_modes_tieable_p): Make static. * config/nds32/nds32.h (MODES_TIEABLE_P): Delete. * config/nds32/nds32.c (nds32_modes_tieable_p): New function. (TARGET_MODES_TIEABLE_P): Redefine. * config/nios2/nios2.h (MODES_TIEABLE_P): Delete. * config/nvptx/nvptx.h (MODES_TIEABLE_P): Delete. * config/nvptx/nvptx.c (nvptx_modes_tieable_p): New function. (TARGET_MODES_TIEABLE_P): Redefine. * config/pa/pa.h (MODES_TIEABLE_P): Delete. * config/pa/pa-protos.h (pa_modes_tieable_p): Delete. * config/pa/pa.c (pa_modes_tieable_p): Make static. (TARGET_MODES_TIEABLE_P): Redefine. * config/pdp11/pdp11.h (MODES_TIEABLE_P): Delete. * config/pdp11/pdp11.c (TARGET_MODES_TIEABLE_P): Redefine. (pdp11_modes_tieable_p): New function. * config/powerpcspe/powerpcspe.h (MODES_TIEABLE_P): Delete. * config/powerpcspe/powerpcspe.c (TARGET_MODES_TIEABLE_P): Redefine. (rs6000_modes_tieable_p): New function. (rs6000_debug_reg_global): Use it instead of MODES_TIEABLE_P. * config/powerpcspe/powerpcspe.md: Update comment. * config/riscv/riscv.h (MODES_TIEABLE_P): Delete. * config/riscv/riscv.c (riscv_modes_tieable_p): New function. (TARGET_MODES_TIEABLE_P): Redefine. * config/rl78/rl78.h (MODES_TIEABLE_P): Delete. * config/rl78/rl78.c (TARGET_MODES_TIEABLE_P): Redefine. (rl78_modes_tieable_p): New function. * config/rs6000/rs6000.h (MODES_TIEABLE_P): Delete. * config/rs6000/rs6000.c (TARGET_MODES_TIEABLE_P): Redefine. (rs6000_modes_tieable_p): New function. (rs6000_debug_reg_global): Use it instead of MODES_TIEABLE_P. * config/rs6000/rs6000.md: Update comment. * config/rx/rx.h (MODES_TIEABLE_P): Delete. * config/rx/rx.c (rx_modes_tieable_p): New function. (TARGET_MODES_TIEABLE_P): Redefine. * config/s390/s390.h (MODES_TIEABLE_P): Delete. * config/s390/s390.c (s390_modes_tieable_p): New function. (TARGET_MODES_TIEABLE_P): Redefine. * config/sh/sh.h (MODES_TIEABLE_P): Delete. * config/sh/sh.c (TARGET_MODES_TIEABLE_P): Redefine. (sh_modes_tieable_p): New function. * config/sparc/sparc.h (MODES_TIEABLE_P): Delete. * config/sparc/sparc-protos.h (sparc_modes_tieable_p): Delete. * config/sparc/sparc.c (TARGET_MODES_TIEABLE_P): Redefine. (sparc_modes_tieable_p): Make static. * config/spu/spu.h (MODES_TIEABLE_P): Delete. * config/spu/spu.c (spu_modes_tieable_p): New function. (TARGET_MODES_TIEABLE_P): Redefine. * config/stormy16/stormy16.h (MODES_TIEABLE_P): Delete. * config/stormy16/stormy16.c (xstormy16_modes_tieable_p): New function. (TARGET_MODES_TIEABLE_P): Redefine. * config/tilegx/tilegx.h (MODES_TIEABLE_P): Delete. * config/tilepro/tilepro.h (MODES_TIEABLE_P): Delete. * config/v850/v850.h (MODES_TIEABLE_P): Delete. * config/v850/v850.c (v850_modes_tieable_p): New function. (TARGET_MODES_TIEABLE_P): Redefine. * config/vax/vax.h (MODES_TIEABLE_P): Delete. * config/visium/visium.h (MODES_TIEABLE_P): Delete. * config/visium/visium.c (TARGET_MODES_TIEABLE_P): Redefine. (visium_modes_tieable_p): New function. * config/xtensa/xtensa.h (MODES_TIEABLE_P): Delete. * config/xtensa/xtensa.c (TARGET_MODES_TIEABLE_P): Redefine. (xtensa_modes_tieable_p): New function. * system.h (MODES_TIEABLE_P): Poison. Co-Authored-By: Alan Hayward <alan.hayward@arm.com> Co-Authored-By: David Sherwood <david.sherwood@arm.com> From-SVN: r251647
2017-09-04Turn HARD_REGNO_MODE_OK into a target hookRichard Sandiford1-2/+0
2017-09-04 Richard Sandiford <richard.sandiford@linaro.org> Alan Hayward <alan.hayward@arm.com> David Sherwood <david.sherwood@arm.com> gcc/ * target.def (hard_regno_mode_ok): New hook. * doc/tm.texi (HARD_REGNO_MODE_OK): Replace with... (TARGET_HARD_REGNO_MODE_OK): ...this. * doc/tm.texi.in: Regenerate. * hooks.h (hook_bool_uint_mode_true): Declare. * hooks.c (hook_bool_uint_mode_true): New function. * doc/md.texi: Refer to targetm.hard_regno_mode_ok instead of HARD_REGNO_MODE_OK. * genpreds.c (write_insn_preds_c): Add an include of target.h. * alias.c (init_alias_target): Use targetm.hard_regno_mode_ok instead of HARD_REGNO_MODE_OK. * caller-save.c: Include target.h. (reg_save_code): Use targetm.hard_regno_mode_ok instead of HARD_REGNO_MODE_OK. * combine.c (can_combine_p): Likewise. (combinable_i3pat): Likewise. (can_change_dest_mode): Likewise. * expr.c (init_expr_target): Likewise. (convert_move): Likewise. (convert_modes): Likewise. * ira.c (setup_prohibited_class_mode_regs): Likewise. (setup_prohibited_mode_move_regs): Likewise. * ira.h (target_ira): Likewise. * lra-assigns.c (find_hard_regno_for_1): Likewise. * lra-constraints.c (process_alt_operands): Likewise. (split_reg): Likewise. * recog.c (peep2_find_free_register): Likewise. * ree.c (combine_reaching_defs): Likewise. * regcprop.c (maybe_mode_change): Likewise. * reginfo.c (init_reg_sets_1): Likewise. (choose_hard_reg_mode): Likewise. (simplifiable_subregs): Likewise. * regrename.c (check_new_reg_p): Likewise. * reload.c (find_valid_class): Likewise. (find_valid_class_1): Likewise. (reload_inner_reg_of_subreg): Likewise. (push_reload): Likewise. (combine_reloads): Likewise. (find_dummy_reload): Likewise. (find_reloads): Likewise. * reload1.c (find_reg): Likewise. (set_reload_reg): Likewise. (allocate_reload_reg): Likewise. (choose_reload_regs): Likewise. (reload_adjust_reg_for_temp): Likewise. * rtlanal.c (subreg_size_offset_from_lsb): Likewise. (simplify_subreg_regno): Likewise. * sel-sched.c (init_regs_for_mode): Likewise. * varasm.c (make_decl_rtl): Likewise. * config/aarch64/aarch64.h (HARD_REGNO_MODE_OK): Delete. (MODES_TIEABLE_P): Use targetm.hard_regno_mode_ok instead of HARD_REGNO_MODE_OK. * config/aarch64/aarch64-protos.h (aarch64_hard_regno_mode_ok): Delete. * config/aarch64/aarch64.c (aarch64_hard_regno_mode_ok): Make static. (TARGET_HARD_REGNO_MODE_OK): Redefine. * config/alpha/alpha.h (HARD_REGNO_MODE_OK): Delete. * config/alpha/alpha.c (alpha_hard_regno_mode_ok): New function. (TARGET_HARD_REGNO_MODE_OK): Redefine. * config/arc/arc.h (arc_hard_regno_mode_ok): Delete. (arc_mode_class): Delete. (HARD_REGNO_MODE_OK): Delete. * config/arc/arc.c (TARGET_HARD_REGNO_MODE_OK): Redefine. (arc_hard_regno_mode_ok): Rename old array to... (arc_hard_regno_mode_ok_modes): ...this. (arc_conditional_register_usage): Update accordingly. (arc_mode_class): Make static. (arc_hard_regno_mode_ok): New function. * config/arm/arm.h (HARD_REGNO_MODE_OK): Delete. * config/arm/arm-protos.h (arm_hard_regno_mode_ok): Delete. * config/arm/arm.c (TARGET_HARD_REGNO_MODE_OK): Redefine. (arm_hard_regno_mode_ok): Make static. * config/arm/arm.md (movdi): Use targetm.hard_regno_mode_ok instead of HARD_REGNO_MODE_OK. * config/avr/avr-protos.h (avr_hard_regno_mode_ok): Delete. * config/avr/avr.h (HARD_REGNO_MODE_OK): Delete. * config/avr/avr.c (avr_hard_regno_mode_ok): Make static and return a bool. (TARGET_HARD_REGNO_MODE_OK): Redefine. * config/bfin/bfin-protos.h (hard_regno_mode_ok): Delete. * config/bfin/bfin.h (HARD_REGNO_MODE_OK): Delete. * config/bfin/bfin.c (hard_regno_mode_ok): Rename to... (bfin_hard_regno_mode_ok): ...this. Make static and return a bool. (TARGET_HARD_REGNO_MODE_OK): Redefine. * config/bfin/predicates.md (valid_reg_operand): Use targetm.hard_regno_mode_ok instead of HARD_REGNO_MODE_OK. * config/c6x/c6x.h (HARD_REGNO_MODE_OK): Delete. * config/c6x/c6x.c (c6x_hard_regno_mode_ok): New function. (TARGET_HARD_REGNO_MODE_OK): Redefine. * config/cr16/cr16.h (HARD_REGNO_MODE_OK): Delete. * config/cr16/cr16-protos.h (cr16_hard_regno_mode_ok): Delete. * config/cr16/cr16.c (TARGET_HARD_REGNO_MODE_OK): Redefine. (cr16_hard_regno_mode_ok): Make static and return a bool. * config/cris/cris.h (HARD_REGNO_MODE_OK): Delete. * config/cris/cris.c (TARGET_HARD_REGNO_MODE_OK): Redefine. (cris_hard_regno_mode_ok): New function. * config/epiphany/epiphany.h (epiphany_hard_regno_mode_ok): Delete. (epiphany_mode_class): Delete. (HARD_REGNO_MODE_OK): Delete. * config/epiphany/epiphany-protos.h (hard_regno_mode_ok): Delete. * config/epiphany/epiphany.c (TARGET_HARD_REGNO_MODE_OK): Redefine. (hard_regno_mode_ok): Rename to... (epiphany_hard_regno_mode_ok): ...this. Make static and return a bool. * config/fr30/fr30.h (HARD_REGNO_MODE_OK): Delete. * config/fr30/fr30.md: Refer to targetm.hard_regno_mode_ok instead of HARD_REGNO_MODE_OK. * config/frv/frv.h (HARD_REGNO_MODE_OK): Delete. * config/frv/frv-protos.h (frv_hard_regno_mode_ok): Delete. * config/frv/frv.c (TARGET_HARD_REGNO_MODE_OK): Redefine. (frv_hard_regno_mode_ok): Make static and return a bool. * config/frv/frv.md: Refer to targetm.hard_regno_mode_ok instead of HARD_REGNO_MODE_OK. * config/ft32/ft32.h (HARD_REGNO_MODE_OK): Delete. * config/h8300/h8300.h (HARD_REGNO_MODE_OK): Delete. * config/h8300/h8300-protos.h (h8300_hard_regno_mode_ok): Delete. * config/h8300/h8300.c (h8300_hard_regno_mode_ok): Make static and return a bool. (TARGET_HARD_REGNO_MODE_OK): Redefine. * config/i386/i386.h (HARD_REGNO_MODE_OK): Delete. * config/i386/i386-protos.h (ix86_hard_regno_mode_ok): Delete. * config/i386/i386.c (ix86_hard_regno_mode_ok): Make static and return a bool. (TARGET_HARD_REGNO_MODE_OK): Redefine. * config/ia64/ia64.h (HARD_REGNO_MODE_OK): Delete. * config/ia64/ia64.c (TARGET_HARD_REGNO_MODE_OK): Redefine. (ia64_hard_regno_mode_ok): New function. * config/iq2000/iq2000.h (HARD_REGNO_MODE_OK): Delete. * config/iq2000/iq2000.c (TARGET_HARD_REGNO_MODE_OK): Redefine. (iq2000_hard_regno_mode_ok): New function. * config/lm32/lm32.h (HARD_REGNO_MODE_OK): Delete. * config/lm32/lm32.c (TARGET_HARD_REGNO_MODE_OK): Redefine. (lm32_hard_regno_mode_ok): New function. * config/m32c/m32c.h (HARD_REGNO_MODE_OK): Delete. * config/m32c/m32c-protos.h (m32c_hard_regno_ok): Delete. * config/m32c/m32c.c (class_can_hold_mode): Use m32c_hard_regno_mode_ok instead of HARD_REGNO_MODE_OK. (m32c_hard_regno_ok): Rename to... (m32c_hard_regno_mode_ok): ...this. Make static and return a bool. (m32c_cannot_change_mode_class): Update accordingly. (TARGET_HARD_REGNO_MODE_OK): Redefine. * config/m32r/m32r.h (m32r_hard_regno_mode_ok): Delete. (m32r_mode_class): Delete. (HARD_REGNO_MODE_OK): Delete. * config/m32r/m32r.c (TARGET_HARD_REGNO_MODE_OK): Redefine. (m32r_hard_regno_mode_ok): Rename to... (m32r_hard_regno_modes): ...this. (m32r_mode_class): Make static. (m32r_hard_regno_mode_ok): New function. * config/m68k/m68k.h (HARD_REGNO_MODE_OK): Delete. * config/m68k/m68k-protos.h (m68k_regno_mode_ok): Delete. * config/m68k/m68k.c (TARGET_HARD_REGNO_MODE_OK): Redefine. (m68k_hard_regno_mode_ok): Make static. * config/mcore/mcore.h (HARD_REGNO_MODE_OK): Delete. * config/mcore/mcore.c (TARGET_HARD_REGNO_MODE_OK): Redefine. (mcore_hard_regno_mode_ok): New function. * config/microblaze/microblaze.h (microblaze_hard_regno_mode_ok) (HARD_REGNO_MODE_OK): Delete. * config/microblaze/microblaze.c (microblaze_hard_regno_mode_ok): Rename to... (microblaze_hard_regno_mode_ok_p): ...this and make static. (microblaze_hard_regno_mode_ok): New function. (TARGET_HARD_REGNO_MODE_OK): Redefine. * config/mips/mips.h (HARD_REGNO_MODE_OK): Delete. (mips_hard_regno_mode_ok): Delete. * config/mips/mips.c (mips_hard_regno_mode_ok): Rename to... (mips_hard_regno_mode_ok_p): ...this and make static. (mips_hard_regno_mode_ok_p): Rename to... (mips_hard_regno_mode_ok_uncached): ...this. (mips_hard_regno_mode_ok): New function. (mips_class_max_nregs): Use mips_hard_regno_mode_ok instead of HARD_REGNO_MODE_OK. (mips_option_override): Update after above name changes. (TARGET_HARD_REGNO_MODE_OK): Redefine. * config/mmix/mmix.h (HARD_REGNO_MODE_OK): Delete. * config/mn10300/mn10300.h (HARD_REGNO_MODE_OK): Delete. * config/mn10300/mn10300-protos.h (mn10300_hard_regno_mode_ok): Delete. * config/mn10300/mn10300.c (mn10300_hard_regno_mode_ok): Make static. (TARGET_HARD_REGNO_MODE_OK): Redefine. * config/moxie/moxie.h (HARD_REGNO_MODE_OK): Delete. * config/msp430/msp430.h (HARD_REGNO_MODE_OK): Delete. * config/msp430/msp430-protos.h (msp430_hard_regno_mode_ok): Delete. * config/msp430/msp430.c (TARGET_HARD_REGNO_MODE_OK): Redefine. (msp430_hard_regno_mode_ok): Make static and return a bool. * config/nds32/nds32.h (HARD_REGNO_MODE_OK): Delete. * config/nds32/nds32-protos.h (nds32_hard_regno_mode_ok): Delete. * config/nds32/nds32.c (nds32_hard_regno_mode_ok): Make static and return a bool. (TARGET_HARD_REGNO_MODE_OK): Redefine. * config/nios2/nios2.h (HARD_REGNO_MODE_OK): Delete. * config/nvptx/nvptx.h (HARD_REGNO_MODE_OK): Delete. * config/pa/pa.h (MODES_TIEABLE_P): Update commentary. * config/pa/pa32-regs.h (HARD_REGNO_MODE_OK): Rename to... (PA_HARD_REGNO_MODE_OK): ...this * config/pa/pa64-regs.h (HARD_REGNO_MODE_OK): Rename to... (PA_HARD_REGNO_MODE_OK): ...this. * config/pa/pa.c (TARGET_HARD_REGNO_MODE_OK): Redefine. (pa_hard_regno_mode_ok): New function. * config/pdp11/pdp11.h (HARD_REGNO_MODE_OK): Delete. * config/pdp11/pdp11.c (TARGET_HARD_REGNO_MODE_OK): Redefine. (pdp11_hard_regno_mode_ok): New function. * config/powerpcspe/powerpcspe.h (HARD_REGNO_MODE_OK): Delete. * config/powerpcspe/powerpcspe-protos.h (rs6000_hard_regno_mode_ok_p): Delete. * config/powerpcspe/powerpcspe.c (rs6000_hard_regno_mode_ok_p): Make static. (TARGET_HARD_REGNO_MODE_OK): Redefine. (rs6000_hard_regno_mode_ok): Rename to... (rs6000_hard_regno_mode_ok_uncached): ...this. (rs6000_init_hard_regno_mode_ok): Update accordingly. (rs6000_hard_regno_mode_ok): New function. * config/riscv/riscv.h (HARD_REGNO_MODE_OK): Delete. * config/riscv/riscv-protos.h (riscv_hard_regno_mode_ok_p): Delete. * config/riscv/riscv.c (riscv_hard_regno_mode_ok_p): Rename to... (riscv_hard_regno_mode_ok): ...this and make static. (TARGET_HARD_REGNO_MODE_OK): Redefine. * config/rl78/rl78.h (HARD_REGNO_MODE_OK): Delete. * config/rl78/rl78-protos.h (rl78_hard_regno_mode_ok): Delete. * config/rl78/rl78.c (TARGET_HARD_REGNO_MODE_OK): Redefine. (rl78_hard_regno_mode_ok): Make static and return bool. * config/rs6000/rs6000.h (HARD_REGNO_MODE_OK): Delete. * config/rs6000/rs6000-protos.h (rs6000_hard_regno_mode_ok_p): Delete. * config/rs6000/rs6000.c (rs6000_hard_regno_mode_ok_p): Make static. (TARGET_HARD_REGNO_MODE_OK): Redefine. (rs6000_hard_regno_mode_ok): Rename to... (rs6000_hard_regno_mode_ok_uncached): ...this. (rs6000_init_hard_regno_mode_ok): Update accordingly. (rs6000_hard_regno_mode_ok): New function. * config/rx/rx.h (HARD_REGNO_MODE_OK): Delete. * config/rx/rx.c (rx_hard_regno_mode_ok): New function. (TARGET_HARD_REGNO_MODE_OK): Redefine. * config/s390/s390.h (HARD_REGNO_MODE_OK): Delete. * config/s390/s390-protos.h (s390_hard_regno_mode_ok): Delete. * config/s390/s390.c (s390_hard_regno_mode_ok): Make static. (TARGET_HARD_REGNO_MODE_OK): Redefine. * config/sh/sh.h (HARD_REGNO_MODE_OK): Delete. * config/sh/sh-protos.h (sh_hard_regno_mode_ok): Delete. * config/sh/sh.c (TARGET_HARD_REGNO_MODE_OK): Redefine. (sh_hard_regno_mode_ok): Make static. * config/sparc/constraints.md: Refer to targetm.hard_regno_mode_ok instead of HARD_REGNO_MODE_OK. * config/sparc/sparc.h (hard_regno_mode_classes): Delete. (sparc_mode_class): Delete. (HARD_REGNO_MODE_OK): Delete. * config/sparc/sparc.c (TARGET_HARD_REGNO_MODE_OK): Redefine. (hard_regno_mode_classes): Make static. (sparc_mode_class): Likewise. (sparc_hard_regno_mode_ok): New function. * config/spu/spu.h (HARD_REGNO_MODE_OK): Delete. * config/stormy16/stormy16.h (HARD_REGNO_MODE_OK): Delete. * config/stormy16/stormy16.c (xstormy16_hard_regno_mode_ok): New function. (TARGET_HARD_REGNO_MODE_OK): Redefine. * config/tilegx/tilegx.h (HARD_REGNO_MODE_OK): Delete. * config/tilepro/tilepro.h (HARD_REGNO_MODE_OK): Delete. * config/v850/v850.h (HARD_REGNO_MODE_OK): Delete. * config/v850/v850.c (v850_hard_regno_mode_ok): New function. (TARGET_HARD_REGNO_MODE_OK): Redefine. * config/vax/vax.h (HARD_REGNO_MODE_OK): Delete. * config/visium/visium.h (HARD_REGNO_MODE_OK): Delete. * config/visium/visium.c (TARGET_HARD_REGNO_MODE_OK): Redefine. (visium_hard_regno_mode_ok): New function. * config/visium/visium.md: Refer to targetm.hard_regno_mode_ok instead of HARD_REGNO_MODE_OK. * config/xtensa/xtensa.h (xtensa_hard_regno_mode_ok): Delete. (HARD_REGNO_MODE_OK): Delete. * config/xtensa/xtensa.c (xtensa_hard_regno_mode_ok): Rename to... (xtensa_hard_regno_mode_ok_p): ...this and make static. (xtensa_option_override): Update accordingly. (TARGET_HARD_REGNO_MODE_OK): Redefine. (xtensa_hard_regno_mode_ok): New function. * system.h (HARD_REGNO_MODE_OK): Poison. Co-Authored-By: Alan Hayward <alan.hayward@arm.com> Co-Authored-By: David Sherwood <david.sherwood@arm.com> From-SVN: r251646
2017-08-30[1/77] Add an E_ prefix to mode namesRichard Sandiford1-6/+6
Later patches will add wrapper types for specific classes of mode. E.g. SImode will be a scalar_int_mode, SFmode will be a scalar_float_mode, etc. This patch prepares for that change by adding an E_ prefix to the mode enum values. It also adds #defines that map the unprefixed names to the prefixed names; e.g: #define QImode E_QImode Later patches will change this to use things like scalar_int_mode where appropriate. The patch continues to use enum values to initialise static data. This isn't necessary for correctness, but it cuts down on the amount of load-time initialisation and shouldn't have any downsides. The patch also changes things like: cmp_mode == DImode ? DFmode : DImode to: cmp_mode == DImode ? E_DFmode : E_DImode This is because DImode and DFmode will eventually be different classes, so the original ?: wouldn't be well-formed. 2017-08-30 Richard Sandiford <richard.sandiford@linaro.org> Alan Hayward <alan.hayward@arm.com> David Sherwood <david.sherwood@arm.com> gcc/ * genmodes.c (mode_size_inline): Add an E_ prefix to mode names. (mode_nunits_inline): Likewise. (mode_inner_inline): Likewise. (mode_unit_size_inline): Likewise. (mode_unit_precision_inline): Likewise. (emit_insn_modes_h): Likewise. Also emit a #define of the unprefixed name. (emit_mode_wider): Add an E_ prefix to mode names. (emit_mode_complex): Likewise. (emit_mode_inner): Likewise. (emit_mode_adjustments): Likewise. (emit_mode_int_n): Likewise. * config/aarch64/aarch64-builtins.c (v8qi_UP, v4hi_UP, v4hf_UP) (v2si_UP, v2sf_UP, v1df_UP, di_UP, df_UP, v16qi_UP, v8hi_UP, v8hf_UP) (v4si_UP, v4sf_UP, v2di_UP, v2df_UP, ti_UP, oi_UP, ci_UP, xi_UP) (si_UP, sf_UP, hi_UP, hf_UP, qi_UP): Likewise. (CRC32_BUILTIN, ENTRY): Likewise. * config/aarch64/aarch64.c (aarch64_push_regs): Likewise. (aarch64_pop_regs): Likewise. (aarch64_process_components): Likewise. * config/alpha/alpha.c (alpha_emit_conditional_move): Likewise. * config/arm/arm-builtins.c (v8qi_UP, v4hi_UP, v4hf_UP, v2si_UP) (v2sf_UP, di_UP, v16qi_UP, v8hi_UP, v8hf_UP, v4si_UP, v4sf_UP) (v2di_UP, ti_UP, ei_UP, oi_UP, hf_UP, si_UP, void_UP): Likewise. * config/arm/arm.c (arm_init_libfuncs): Likewise. * config/i386/i386-builtin-types.awk (ix86_builtin_type_vect_mode): Likewise. * config/i386/i386-builtin.def (pcmpestr): Likewise. (pcmpistr): Likewise. * config/microblaze/microblaze.c (double_memory_operand): Likewise. * config/mmix/mmix.c (mmix_output_condition): Likewise. * config/powerpcspe/powerpcspe.c (rs6000_init_hard_regno_mode_ok): Likewise. * config/rl78/rl78.c (mduc_regs): Likewise. * config/rs6000/rs6000.c (rs6000_init_hard_regno_mode_ok): Likewise. (htm_expand_builtin): Likewise. * config/sh/sh.h (REGISTER_NATURAL_MODE): Likewise. * config/sparc/sparc.c (emit_save_or_restore_regs): Likewise. * config/xtensa/xtensa.c (print_operand): Likewise. * expmed.h (NUM_MODE_PARTIAL_INT): Likewise. (NUM_MODE_VECTOR_INT): Likewise. * genoutput.c (null_operand): Likewise. (output_operand_data): Likewise. * genrecog.c (print_parameter_value): Likewise. * lra.c (debug_operand_data): Likewise. Co-Authored-By: Alan Hayward <alan.hayward@arm.com> Co-Authored-By: David Sherwood <david.sherwood@arm.com> From-SVN: r251452
2017-08-21Remove the frame size argument from function_prologue/epilogueRichard Sandiford1-6/+4
Later patches will add support for frame sizes that are a run-time invariant but not a compile-time constant. This then raised the question of whether the frame size argument to the function_prologue/ epilogue hooks should be updated accordingly. It turned out that only two targets actually used this argument, and even they got other frame-related information from the cached machine structure. This patch therefore removes the argument and makes the two targets use get_frame_size () instead. 2017-08-21 Richard Sandiford <richard.sandiford@linaro.org> Alan Hayward <alan.hayward@arm.com> David Sherwood <david.sherwood@arm.com> gcc/ * target.def (function_prologue): Remove frame size argument. (function_epilogue): Likewise. * doc/tm.texi: Regenerate. * final.c (final_start_function): Update call to function_prologue. (final_end_function): Update call to function_epilogue. (default_function_pro_epilogue): Remove frame size argument. * output.h (default_function_pro_epilogue): Likewise. * config/arm/arm.c (arm_output_function_epilogue): Likewise. (arm_output_function_prologue): Likewise. * config/frv/frv.c (frv_function_prologue): Likewise. (frv_function_epilogue): Likewise. * config/i386/i386.c (ix86_output_function_epilogue): Likewise. * config/ia64/ia64.c (ia64_output_function_prologue): Likewise. (ia64_output_function_epilogue): Likewise. * config/m32r/m32r.c (m32r_output_function_prologue): Likewise. (m32r_output_function_epilogue): Likewise. * config/microblaze/microblaze.c (microblaze_function_prologue) (microblaze_function_epilogue): Likewise. * config/mips/mips.c (mips_output_function_prologue): Likewise. (mips_output_function_epilogue): Likewise. * config/mmix/mmix.c (mmix_target_asm_function_prologue): Likewise. (mmix_target_asm_function_epilogue): Likewise. * config/msp430/msp430.c (msp430_start_function): Likewise. * config/nds32/nds32.c (nds32_asm_function_prologue): Likewise. (nds32_asm_function_epilogue): Likewise. * config/nios2/nios2.c (nios2_asm_function_prologue): Likewise. * config/pa/pa.c (pa_output_function_prologue): Likewise. (pa_output_function_epilogue): Likewise. * config/powerpcspe/powerpcspe.c (rs6000_output_function_prologue) (rs6000_output_function_epilogue): Likewise. * config/rl78/rl78.c (rl78_start_function): Likewise. * config/rs6000/rs6000.c (rs6000_output_function_prologue): Likewise. (rs6000_output_function_epilogue): Likewise. * config/rx/rx.c (rx_output_function_prologue): Likewise. * config/sh/sh.c (sh_output_function_epilogue): Likewise. * config/sparc/sparc.c (sparc_asm_function_prologue): Likewise. (sparc_asm_function_epilogue): Likewise. Co-Authored-By: Alan Hayward <alan.hayward@arm.com> Co-Authored-By: David Sherwood <david.sherwood@arm.com> From-SVN: r251232
2017-08-08trans.c: Include header files.Martin Liska1-0/+2
. 2017-08-08 Martin Liska <mliska@suse.cz> * gcc-interface/trans.c: Include header files. 2017-08-08 Martin Liska <mliska@suse.cz> * objc-gnu-runtime-abi-01.c: Include header files. * objc-next-runtime-abi-01.c: Likewise. * objc-next-runtime-abi-02.c: Likewise. 2017-08-08 Martin Liska <mliska@suse.cz> * asan.c: Include header files. * attribs.c (build_decl_attribute_variant): New function moved from tree.[ch]. (build_type_attribute_qual_variant): Likewise. (cmp_attrib_identifiers): Likewise. (simple_cst_list_equal): Likewise. (omp_declare_simd_clauses_equal): Likewise. (attribute_value_equal): Likewise. (comp_type_attributes): Likewise. (build_type_attribute_variant): Likewise. (lookup_ident_attribute): Likewise. (remove_attribute): Likewise. (merge_attributes): Likewise. (merge_type_attributes): Likewise. (merge_decl_attributes): Likewise. (merge_dllimport_decl_attributes): Likewise. (handle_dll_attribute): Likewise. (attribute_list_equal): Likewise. (attribute_list_contained): Likewise. * attribs.h (lookup_attribute): New function moved from tree.[ch]. (lookup_attribute_by_prefix): Likewise. * bb-reorder.c: Include header files. * builtins.c: Likewise. * calls.c: Likewise. * cfgexpand.c: Likewise. * cgraph.c: Likewise. * cgraphunit.c: Likewise. * convert.c: Likewise. * dwarf2out.c: Likewise. * final.c: Likewise. * fold-const.c: Likewise. * function.c: Likewise. * gimple-expr.c: Likewise. * gimple-fold.c: Likewise. * gimple-pretty-print.c: Likewise. * gimple.c: Likewise. * gimplify.c: Likewise. * hsa-common.c: Likewise. * hsa-gen.c: Likewise. * internal-fn.c: Likewise. * ipa-chkp.c: Likewise. * ipa-cp.c: Likewise. * ipa-devirt.c: Likewise. * ipa-fnsummary.c: Likewise. * ipa-inline.c: Likewise. * ipa-visibility.c: Likewise. * ipa.c: Likewise. * lto-cgraph.c: Likewise. * omp-expand.c: Likewise. * omp-general.c: Likewise. * omp-low.c: Likewise. * omp-offload.c: Likewise. * omp-simd-clone.c: Likewise. * opts-global.c: Likewise. * passes.c: Likewise. * predict.c: Likewise. * sancov.c: Likewise. * sanopt.c: Likewise. * symtab.c: Likewise. * toplev.c: Likewise. * trans-mem.c: Likewise. * tree-chkp.c: Likewise. * tree-eh.c: Likewise. * tree-into-ssa.c: Likewise. * tree-object-size.c: Likewise. * tree-parloops.c: Likewise. * tree-profile.c: Likewise. * tree-ssa-ccp.c: Likewise. * tree-ssa-live.c: Likewise. * tree-ssa-loop.c: Likewise. * tree-ssa-sccvn.c: Likewise. * tree-ssa-structalias.c: Likewise. * tree-ssa.c: Likewise. * tree-streamer-in.c: Likewise. * tree-vectorizer.c: Likewise. * tree-vrp.c: Likewise. * tsan.c: Likewise. * ubsan.c: Likewise. * varasm.c: Likewise. * varpool.c: Likewise. * tree.c: Remove functions moved to attribs.[ch]. * tree.h: Likewise. * config/aarch64/aarch64.c: Add attrs.h header file. * config/alpha/alpha.c: Likewise. * config/arc/arc.c: Likewise. * config/arm/arm.c: Likewise. * config/avr/avr.c: Likewise. * config/bfin/bfin.c: Likewise. * config/c6x/c6x.c: Likewise. * config/cr16/cr16.c: Likewise. * config/cris/cris.c: Likewise. * config/darwin.c: Likewise. * config/epiphany/epiphany.c: Likewise. * config/fr30/fr30.c: Likewise. * config/frv/frv.c: Likewise. * config/ft32/ft32.c: Likewise. * config/h8300/h8300.c: Likewise. * config/i386/winnt.c: Likewise. * config/ia64/ia64.c: Likewise. * config/iq2000/iq2000.c: Likewise. * config/lm32/lm32.c: Likewise. * config/m32c/m32c.c: Likewise. * config/m32r/m32r.c: Likewise. * config/m68k/m68k.c: Likewise. * config/mcore/mcore.c: Likewise. * config/microblaze/microblaze.c: Likewise. * config/mips/mips.c: Likewise. * config/mmix/mmix.c: Likewise. * config/mn10300/mn10300.c: Likewise. * config/moxie/moxie.c: Likewise. * config/msp430/msp430.c: Likewise. * config/nds32/nds32-isr.c: Likewise. * config/nds32/nds32.c: Likewise. * config/nios2/nios2.c: Likewise. * config/nvptx/nvptx.c: Likewise. * config/pa/pa.c: Likewise. * config/pdp11/pdp11.c: Likewise. * config/powerpcspe/powerpcspe.c: Likewise. * config/riscv/riscv.c: Likewise. * config/rl78/rl78.c: Likewise. * config/rx/rx.c: Likewise. * config/s390/s390.c: Likewise. * config/sh/sh.c: Likewise. * config/sol2.c: Likewise. * config/sparc/sparc.c: Likewise. * config/spu/spu.c: Likewise. * config/stormy16/stormy16.c: Likewise. * config/tilegx/tilegx.c: Likewise. * config/tilepro/tilepro.c: Likewise. * config/v850/v850.c: Likewise. * config/vax/vax.c: Likewise. * config/visium/visium.c: Likewise. * config/xtensa/xtensa.c: Likewise. 2017-08-08 Martin Liska <mliska@suse.cz> * call.c: Include header files. * cp-gimplify.c: Likewise. * cp-ubsan.c: Likewise. * cvt.c: Likewise. * init.c: Likewise. * search.c: Likewise. * semantics.c: Likewise. * typeck.c: Likewise. 2017-08-08 Martin Liska <mliska@suse.cz> * lto-lang.c: Include header files. * lto-symtab.c: Likewise. 2017-08-08 Martin Liska <mliska@suse.cz> * c-convert.c: Include header files. * c-typeck.c: Likewise. 2017-08-08 Martin Liska <mliska@suse.cz> * c-ada-spec.c: Include header files. * c-ubsan.c: Likewise. * c-warn.c: Likewise. 2017-08-08 Martin Liska <mliska@suse.cz> * trans-types.c: Include header files. From-SVN: r250946
2017-07-16profile-count.h (profile_probability::from_reg_br_prob_note, [...]): New ↵Jan Hubicka1-1/+2
functions. * profile-count.h (profile_probability::from_reg_br_prob_note, profile_probability::to_reg_br_prob_note): New functions. * doc/rtl.texi (REG_BR_PROB_NOTE): Update documentation. * reg-notes.h (REG_BR_PROB, REG_BR_PRED): Update docs. * predict.c (probability_reliable_p): Update. (edge_probability_reliable_p): Update. (br_prob_note_reliable_p): Update. (invert_br_probabilities): Update. (add_reg_br_prob_note): New function. (combine_predictions_for_insn): Update. * asan.c (asan_clear_shadow): Update. * cfgbuild.c (compute_outgoing_frequencies): Update. * cfgrtl.c (force_nonfallthru_and_redirect): Update. (update_br_prob_note): Update. (rtl_verify_edges): Update. (purge_dead_edges): Update. (fixup_reorder_chain): Update. * emit-rtl.c (try_split): Update. * ifcvt.c (cond_exec_process_insns): Update. (cond_exec_process_if_block): Update. (dead_or_predicable): Update. * internal-fn.c (expand_addsub_overflow): Update. (expand_neg_overflow): Update. (expand_mul_overflow): Update. * loop-doloop.c (doloop_modify): Update. * loop-unroll.c (compare_and_jump_seq): Update. * optabs.c (emit_cmp_and_jump_insn_1): Update. * predict.h: Update. * reorg.c (mostly_true_jump): Update. * rtl.h: Update. * config/aarch64/aarch64.c (aarch64_emit_unlikely_jump): Update. * config/alpha/alpha.c (emit_unlikely_jump): Update. * config/arc/arc.c: (emit_unlikely_jump): Update. * config/arm/arm.c: (emit_unlikely_jump): Update. * config/bfin/bfin.c (cbranch_predicted_taken_p): Update. * config/frv/frv.c (frv_print_operand_jump_hint): Update. * config/i386/i386.c (ix86_expand_split_stack_prologue): Update. (ix86_print_operand): Update. (ix86_split_fp_branch): Update. (predict_jump): Update. * config/ia64/ia64.c (ia64_print_operand): Update. * config/mmix/mmix.c (mmix_print_operand): Update. * config/powerpcspe/powerpcspe.c (output_cbranch): Update. (rs6000_expand_split_stack_prologue): Update. * config/rs6000/rs6000.c: Update. * config/s390/s390.c (s390_expand_vec_strlen): Update. (s390_expand_vec_movstr): Update. (s390_expand_cs_tdsi): Update. (s390_expand_split_stack_prologue): Update. * config/sh/sh.c (sh_print_operand): Update. (expand_cbranchsi4): Update. (expand_cbranchdi4): Update. * config/sparc/sparc.c (output_v9branch): Update. * config/spu/spu.c (get_branch_target): Update. (ea_load_store_inline): Update. * config/tilegx/tilegx.c (cbranch_predicted_p): Update. * config/tilepro/tilepro.c: Update. * gcc.dg/predict-8.c: Update. From-SVN: r250239
2017-01-01Update copyright years.Jakub Jelinek9-9/+9
From-SVN: r243994
2016-10-13Move MEMMODEL_* from coretypes.h to memmodel.hThomas Preud'homme1-0/+1
2016-10-13 Thomas Preud'homme <thomas.preudhomme@arm.com> gcc/ * coretypes.h: Move MEMMODEL_* macros and enum memmodel definition into ... * memmodel.h: This file. * alias.c, asan.c, auto-inc-dec.c, bb-reorder.c, bt-load.c, caller-save.c, calls.c, ccmp.c, cfgbuild.c, cfgcleanup.c, cfgexpand.c, cfgloopanal.c, cfgrtl.c, cilk-common.c, combine.c, combine-stack-adj.c, common/config/aarch64/aarch64-common.c, common/config/arm/arm-common.c, common/config/bfin/bfin-common.c, common/config/c6x/c6x-common.c, common/config/i386/i386-common.c, common/config/ia64/ia64-common.c, common/config/nvptx/nvptx-common.c, compare-elim.c, config/aarch64/aarch64-builtins.c, config/aarch64/aarch64-c.c, config/aarch64/cortex-a57-fma-steering.c, config/arc/arc.c, config/arc/arc-c.c, config/arm/arm-builtins.c, config/arm/arm-c.c, config/avr/avr.c, config/avr/avr-c.c, config/avr/avr-log.c, config/bfin/bfin.c, config/c6x/c6x.c, config/cr16/cr16.c, config/cris/cris.c, config/darwin-c.c, config/darwin.c, config/epiphany/epiphany.c, config/epiphany/mode-switch-use.c, config/epiphany/resolve-sw-modes.c, config/fr30/fr30.c, config/frv/frv.c, config/ft32/ft32.c, config/h8300/h8300.c, config/i386/i386-c.c, config/i386/winnt.c, config/iq2000/iq2000.c, config/lm32/lm32.c, config/m32c/m32c.c, config/m32r/m32r.c, config/m68k/m68k.c, config/mcore/mcore.c, config/microblaze/microblaze.c, config/mmix/mmix.c, config/mn10300/mn10300.c, config/moxie/moxie.c, config/msp430/msp430.c, config/nds32/nds32-cost.c, config/nds32/nds32-intrinsic.c, config/nds32/nds32-md-auxiliary.c, config/nds32/nds32-memory-manipulation.c, config/nds32/nds32-predicates.c, config/nds32/nds32.c, config/nios2/nios2.c, config/nvptx/nvptx.c, config/pa/pa.c, config/pdp11/pdp11.c, config/rl78/rl78.c, config/rs6000/rs6000-c.c, config/rx/rx.c, config/s390/s390-c.c, config/s390/s390.c, config/sh/sh.c, config/sh/sh-c.c, config/sh/sh-mem.cc, config/sh/sh_treg_combine.cc, config/sol2.c, config/spu/spu.c, config/stormy16/stormy16.c, config/tilegx/tilegx.c, config/tilepro/tilepro.c, config/v850/v850.c, config/vax/vax.c, config/visium/visium.c, config/vms/vms-c.c, config/xtensa/xtensa.c, coverage.c, cppbuiltin.c, cprop.c, cse.c, cselib.c, dbxout.c, dce.c, df-core.c, df-problems.c, df-scan.c, dojump.c, dse.c, dwarf2asm.c, dwarf2cfi.c, dwarf2out.c, emit-rtl.c, except.c, explow.c, expmed.c, expr.c, final.c, fold-const.c, function.c, fwprop.c, gcse.c, ggc-page.c, haifa-sched.c, hsa-brig.c, hsa-gen.c, hw-doloop.c, ifcvt.c, init-regs.c, internal-fn.c, ira-build.c, ira-color.c, ira-conflicts.c, ira-costs.c, ira-emit.c, ira-lives.c, ira.c, jump.c, loop-doloop.c, loop-invariant.c, loop-iv.c, loop-unroll.c, lower-subreg.c, lra.c, lra-assigns.c, lra-coalesce.c, lra-constraints.c, lra-eliminations.c, lra-lives.c, lra-remat.c, lra-spills.c, mode-switching.c, modulo-sched.c, omp-low.c, passes.c, postreload-gcse.c, postreload.c, predict.c, print-rtl-function.c, recog.c, ree.c, reg-stack.c, regcprop.c, reginfo.c, regrename.c, reload.c, reload1.c, reorg.c, resource.c, rtl-chkp.c, rtl-tests.c, rtlanal.c, rtlhooks.c, sched-deps.c, sched-rgn.c, sdbout.c, sel-sched-ir.c, sel-sched.c, shrink-wrap.c, simplify-rtx.c, stack-ptr-mod.c, stmt.c, stor-layout.c, target-globals.c, targhooks.c, toplev.c, tree-nested.c, tree-outof-ssa.c, tree-profile.c, tree-ssa-coalesce.c, tree-ssa-ifcombine.c, tree-ssa-loop-ivopts.c, tree-ssa-loop.c, tree-ssa-reassoc.c, tree-ssa-sccvn.c, tree-vect-data-refs.c, ubsan.c, valtrack.c, var-tracking.c, varasm.c: Include memmodel.h. * genattrtab.c (write_header): Include memmodel.h in generated file. * genautomata.c (main): Likewise. * gengtype.c (open_base_files): Likewise. * genopinit.c (main): Likewise. * genconditions.c (write_header): Include memmodel.h earlier in generated file. * genemit.c (main): Likewise. * genoutput.c (output_prologue): Likewise. * genpeep.c (main): Likewise. * genpreds.c (write_insn_preds_c): Likewise. * genrecog.c (write_header): Likewise. * Makefile.in (PLUGIN_HEADERS): Include memmodel.h gcc/ada/ * gcc-interface/utils2.c: Include memmodel.h. gcc/c-family/ * c-cppbuiltin.c: Include memmodel.h. * c-opts.c: Likewise. * c-pragma.c: Likewise. * c-warn.c: Likewise. gcc/c/ * c-typeck.c: Include memmodel.h. gcc/cp/ * decl2.c: Include memmodel.h. * rtti.c: Likewise. gcc/fortran/ * trans-intrinsic.c: Include memmodel.h. gcc/go/ * go-backend.c: Include memmodel.h. libgcc/ * libgcov-profiler.c: Replace MEMMODEL_* macros by their __ATOMIC_* equivalent. * config/tilepro/atomic.c: Likewise and stop casting model to enum memmodel. From-SVN: r241121
2016-09-14Put a TARGET_LRA_P into every targetSegher Boessenkool1-0/+3
This patch adds a TARGET_LRA_P (defined to hook_bool_void_false) to every target that didn't yet override the hook. No functional change. 2016-09-14 Segher Boessenkool <segher@kernel.crashing.org> * config/alpha/alpha.c (TARGET_LRA_P): New macro, defined to hook_bool_void_false. * config/avr/avr.c: Ditto. * config/bfin/bfin.c: Ditto. * config/c6x/c6x.c: Ditto. * config/cr16/cr16.c: Ditto. * config/cris/cris.c: Ditto. * config/epiphany/epiphany.c: Ditto. * config/fr30/fr30.c: Ditto. * config/frv/frv.c: Ditto. * config/h8300/h8300.c: Ditto. * config/ia64/ia64.c: Ditto. * config/iq2000/iq2000.c: Ditto. * config/lm32/lm32.c: Ditto. * config/m32c/m32c.c: Ditto. * config/m32r/m32r.c: Ditto. * config/m68k/m68k.c: Ditto. * config/mcore/mcore.c: Ditto. * config/microblaze/microblaze.c: Ditto. * config/mmix/mmix.c: Ditto. * config/mn10300/mn10300.c: Ditto. * config/moxie/moxie.c: Ditto. * config/msp430/msp430.c: Ditto. * config/nios2/nios2.c: Ditto. * config/nvptx/nvptx.c: Ditto. * config/pa/pa.c: Ditto. * config/pdp11/pdp11.c: Ditto. * config/rl78/rl78.c: Ditto. * config/sparc/sparc.c: Ditto. * config/spu/spu.c: Ditto. * config/stormy16/stormy16.c: Ditto. * config/tilegx/tilegx.c: Ditto. * config/tilepro/tilepro.c: Ditto. * config/v850/v850.c: Ditto. * config/vax/vax.c: Ditto. * config/visium/visium.c: Ditto. * config/xtensa/xtensa.c: Ditto. From-SVN: r240130
2016-01-04Update copyright years.Jakub Jelinek9-9/+9
From-SVN: r232055
2015-11-09Machine modes for address printing.Julian Brown1-3/+3
* final.c (output_asm_insn): Pass VOIDmode to output_address. (output_address): Add MODE argument. Pass to print_operand_address hook. * targhooks.c (default_print_operand_address): Add MODE argument. * targhooks.h (default_print_operand_address): Update prototype. * output.h (output_address): Update prototype. * target.def (print_operand_address): Add MODE argument. * config/vax/vax.c (print_operand_address): Pass VOIDmode to output_address. (print_operand): Pass access mode to output_address. * config/mcore/mcore.c (mcore_print_operand_address): Add MODE argument. (mcore_print_operand): Update calls to mcore_print_operand_address. * config/fr30/fr30.c (fr30_print_operand): Pass VOIDmode to output_address. * config/lm32/lm32.c (lm32_print_operand): Pass mode in calls to output_address. * config/tilegx/tilegx.c (output_memory_reference_mode): Remove global. (tilegx_print_operand): Don't set above global. Update calls to output_address. (tilegx_print_operand_address): Add MODE argument. Use instead of output_memory_reference_mode global. * config/frv/frv.c (frv_print_operand_address): Add MODE argument. (frv_print_operand): Pass mode to frv_print_operand_address calls. * config/mn10300/mn10300.c (mn10300_print_operand): Pass mode to output_address. * config/cris/cris.c (cris_print_operand_address): Add MODE argument. (cris_print_operand): Pass mode to output_address calls. * config/spu/spu.c (print_operand): Pass mode to output_address calls. * config/aarch64/aarch64.h (aarch64_print_operand) (aarch64_print_operand_address): Remove prototypes. * config/aarch64/aarch64.c (aarch64_memory_reference_mode): Delete global. (aarch64_print_operand): Make static. Update calls to output_address. (aarch64_print_operand_address): Add MODE argument. Use instead of aarch64_memory_reference_mode global. (TARGET_PRINT_OPERAND, TARGET_PRINT_OPERAND_ADDRESS): Define target hooks. * config/aarch64/aarch64.h (PRINT_OPERAND, PRINT_OPERAND_ADDRESS): Delete macro definitions. * config/pa/pa.c (pa_print_operand): Pass mode in output_address calls. * config/xtensa/xtensa.c (print_operand): Pass mode in output_address calls. * config/h8300/h8300.c (h8300_print_operand_address): Add MODE argument. (h83000_print_operand): Update calls to h8300_print_operand_address and output_address. * config/ia64/ia64.c (ia64_print_operand_address): Add MODE argument. * config/tilepro/tilepro.c (output_memory_reference_mode): Delete global. (tilepro_print_operand): Pass mode to output_address. (tilepro_print_operand_address): Add MODE argument. Use instead of output_memory_reference_mode. * config/nvptx/nvptx.c (output_decl_chunk, nvptx_assemble_integer) (nvptx_output_call_insn, nvptx_print_address_operand): Pass VOIDmode to output_address calls. (nvptx_print_operand_address): Add MODE argument. * config/alpha/alpha.c (print_operand): Pass mode argument in output_address calls. * config/m68k/m68k.c (print_operand): Pass mode argument in output_address call. * config/avr/avr.c (avr_print_operand_address): Add MODE argument. (avr_print_operand): Update calls to avr_print_operand_address. * config/sparc/sparc.c (sparc_print_operand_address): Add MODE argument. Update calls to output_address. (sparc_print_operand): Pass mode to output_address. * config/iq2000/iq2000.c (iq2000_print_operand_address): Add MODE argument. (iq2000_print_operand): Pass mode in output_address calls. * config/stormy16/stormy16.c (xstormy16_print_operand_address): Add MODE argument. (xstormy16_print_operand): Pass mode to xstormy16_print_operand_address calls. * config/mips/mips.c (mips_print_operand): Update calls to output_address. (mips_print_operand_address): Add MODE argument. * config/epiphany/epiphany.c (epiphany_print_operand): Update calls to output_address. (epiphany_print_operand_address): Add MODE argument. Add FIXME note. * config/pdp11/pdp11.c (pdp11_asm_print_operand): Update call to output_address. * config/rx/rx.c (rx_print_operand_address): Add MODE argument. (rx_print_operand): Update calls to output_address, rx_print_operand_address. * config/nds32/nds32.c (nds32_print_operand): Update calls to output_address. (nds32_print_operand_address): Add MODE argument. * config/rs6000/rs6000.c (print_operand): Pass mem mode to output_address calls. * config/c6x/c6x.c (print_address_offset): Pass mem mode to output_address call. (c6x_print_address_operand): Update calls to output_address. (c6x_print_operand_address): Pass mode to above. * config/v850/v850.c (v850_print_operand_address): Add MODE argument. (v850_print_operand): Pass mode to v850_print_operand_address, output_address. * config/mmix/mmix.c (mmix_print_operand_address): Add MODE argument. (mmix_print_operand): Pass mode in output_address calls. * config/sh/sh.c (sh_print_operand_address): Add MODE argument. (sh_print_operand): Pass mem mode to output_address, sh_print_operand_address. * config/cr16/cr16.c (cr16_print_operand_address): Add MODE argument. (cr16_print_operand): Pass mode to output_address, cr16_print_operand_address. * config/bfin/bfin.c (print_address_operand): Pass VOIDmode to output_address. * config/microblaze/microblaze.c (print_operand): Pass mode to output_address. * config/nios2/nios2.c (nios2_print_operand): Pass VOIDmode to output_address. (nios2_print_operand_address): Add MODE argument. Update call to nios2_print_operand_address. * config/s390/s390.c (print_operand): Pass mode to output_address. * config/m32c/m32c.c (m32c_print_operand_address): Add MODE argument. * config/arc/arc.c (arc_print_operand): Pass VOIDmode to output_address. * config/arm/arm.c (arm_print_operand_address): Add MODE argument. Use instead of output_memory_reference_mode. (output_memory_reference_mode): Delete global. (arm_print_operand): Pass mem mode to output_address. * config/m32r/m32r.c (m32r_print_operand_address): Add MODE argument. (m32r_print_operand): Pass mode to output_address. * config/msp430/msp430.c (msp430_print_operand_addr): Add MODE argument. (msp430_print_operand): Pass mode to msp430_print_operand_addr. * config/i386/i386.c (ix86_print_operand): Pass mode to output_address calls. (ix86_print_operand_address): Add MODE argument. From-SVN: r230016
2015-10-21Improve --help output to generate references to option aliases.Martin Sebor1-17/+17
gcc/ PR driver/68043 * opts.c (undocumented_msg, use_diagnosed_msg): New globals. (print_filtered_help): Reference aliased option's name and encourage readers to use it in preference to the alias if the former is not documented. Mention when using an option is diagnosed. * gcc.c (display_help): End each sentence with a period. * ada/gcc-interface/lang.opt: End each sentence that describes an option with a period. * c-family/c.opt: Same. * common.opt: Same. * config/aarch64/aarch64.opt: Same. * config/alpha/alpha.opt: Same. * config/arc/arc.opt: Same. * config/arm/arm.opt: Same. * config/avr/avr.opt: Same. * config/bfin/bfin.opt: Same. * config/c6x/c6x.opt: Same. * config/cr16/cr16.opt: Same. * config/cris/cris.opt: Same. * config/cris/linux.opt: Same. * config/darwin.opt: Same. * config/epiphany/epiphany.opt: Same. * config/fr30/fr30.opt: Same. * config/frv/frv.opt: Same. * config/ft32/ft32.opt: Same. * config/g.opt: Same. * config/h8300/h8300.opt: Same. * config/i386/cygming.opt: Same. * config/i386/djgpp.opt: Same. * config/i386/i386.opt: Same. * config/i386/interix.opt: Same. * config/i386/mingw-w64.opt: Same. * config/i386/mingw.opt: Same. * config/ia64/ia64.opt: Same. * config/ia64/ilp32.opt: Same. * config/iq2000/iq2000.opt: Same. * config/linux.opt: Same. * config/lm32/lm32.opt: Same. * config/lynx.opt: Same. * config/m32c/m32c.opt: Same. * config/m32r/m32r.opt: Same. * config/m68k/ieee.opt: Same. * config/m68k/m68k.opt: Same. * config/mcore/mcore.opt: Same. * config/mep/mep.opt: Same. * config/microblaze/microblaze.opt: Same. * config/mips/mips.opt: Same. * config/mmix/mmix.opt: Same. * config/mn10300/mn10300.opt: Same. * config/moxie/moxie.opt: Same. * config/msp430/msp430.opt: Same. * config/nios2/elf.opt: Same. * config/nios2/nios2.opt: Same. * config/nvptx/nvptx.opt: Same. * config/pa/pa-hpux.opt: Same. * config/pa/pa-hpux1010.opt: Same. * config/pa/pa-hpux1111.opt: Same. * config/pa/pa-hpux1131.opt: Same. * config/pa/pa.opt: Same. * config/pa/pa64-hpux.opt: Same. * config/pdp11/pdp11.opt: Same. * config/rl78/rl78.opt: Same. * config/rs6000/476.opt: Same. * config/rs6000/aix64.opt: Same. * config/rs6000/darwin.opt: Same. * config/rs6000/linux64.opt: Same. * config/rs6000/rs6000.opt: Same. * config/rs6000/sysv4.opt: Same. * config/s390/s390.opt: Same. * config/s390/tpf.opt: Same. * config/sh/sh.opt: Same. * config/sol2.opt: Same. * config/sparc/long-double-switch.opt: Same. * config/sparc/sparc.opt: Same. * config/spu/spu.opt: Same. * config/stormy16/stormy16.opt: Same. * config/tilegx/tilegx.opt: Same. * config/tilepro/tilepro.opt: Same. * config/v850/v850.opt: Same. * config/vax/vax.opt: Same. * config/visium/visium.opt: Same. * config/vms/vms.opt: Same. * config/vxworks.opt: Same. * config/xtensa/xtensa.opt: Same. * fortran/lang.opt: Same. testsuite/ PR driver/68043 * gcc.misc-tests/help.exp: Adjust. * lib/options.exp (check_for_options): Add detail to output. From-SVN: r229155
2015-10-16gen-mul-tables.cc: Adjust include files.Andrew MacLeod1-19/+7
2015-10-16 Andrew MacLeod <amacleod@redhat.com> * config/tilepro/gen-mul-tables.cc: Adjust include files. * config/tilegx/mul-tables.c: Regenerate. * config/tilepro/mul-tables.c: Regenerate. * config/tilegx/tilegx-c.c: Adjust include files. * config/tilegx/tilegx.c: Likewise. * config/tilepro/tilepro-c.c: Likewise. * config/tilepro/tilepro.c: Likewise. * config/aarch64/aarch64-builtins.c: Likewise. * config/aarch64/aarch64.c: Likewise. * config/aarch64/cortex-a57-fma-steering.c: Likewise. * config/alpha/alpha.c: Likewise. * config/arc/arc.c: Likewise. * config/arm/aarch-common.c: Likewise. * config/arm/arm-builtins.c: Likewise. * config/arm/arm-c.c: Likewise. * config/arm/arm.c: Likewise. * config/avr/avr-c.c: Likewise. * config/avr/avr-devices.c: Likewise. * config/avr/avr-log.c: Likewise. * config/avr/avr.c: Likewise. * config/bfin/bfin.c: Likewise. * config/c6x/c6x.c: Likewise. * config/cr16/cr16.c: Likewise. * config/cris/cris.c: Likewise. * config/darwin-c.c: Likewise. * config/darwin-driver.c: Likewise. * config/darwin.c: Likewise. * config/default-c.c: Likewise. * config/epiphany/epiphany.c: Likewise. * config/epiphany/mode-switch-use.c: Likewise. * config/epiphany/resolve-sw-modes.c: Likewise. * config/fr30/fr30.c: Likewise. * config/frv/frv.c: Likewise. * config/ft32/ft32.c: Likewise. * config/glibc-c.c: Likewise. * config/h8300/h8300.c: Likewise. * config/i386/host-cygwin.c: Likewise. * config/i386/host-mingw32.c: Likewise. * config/i386/i386-c.c: Likewise. * config/i386/i386.c: Likewise. * config/i386/msformat-c.c: Likewise. * config/i386/winnt-cxx.c: Likewise. * config/i386/winnt-stubs.c: Likewise. * config/i386/winnt.c: Likewise. * config/ia64/ia64-c.c: Likewise. * config/ia64/ia64.c: Likewise. * config/iq2000/iq2000.c: Likewise. * config/lm32/lm32.c: Likewise. * config/m32c/m32c-pragma.c: Likewise. * config/m32c/m32c.c: Likewise. * config/m32r/m32r.c: Likewise. * config/mcore/mcore.c: Likewise. * config/mep/mep-pragma.c: Likewise. * config/mep/mep.c: Likewise. * config/microblaze/microblaze-c.c: Likewise. * config/microblaze/microblaze.c: Likewise. * config/mips/mips-tables.opt * config/mips/mips.c: Likewise. * config/mmix/mmix.c: Likewise. * config/mn10300/mn10300.c: Likewise. * config/moxie/moxie.c: Likewise. * config/msp430/msp430-c.c: Likewise. * config/msp430/msp430.c: Likewise. * config/nds32/nds32-cost.c: Likewise. * config/nds32/nds32-fp-as-gp.c: Likewise. * config/nds32/nds32-intrinsic.c: Likewise. * config/nds32/nds32-isr.c: Likewise. * config/nds32/nds32-md-auxiliary.c: Likewise. * config/nds32/nds32-memory-manipulation.c: Likewise. * config/nds32/nds32-pipelines-auxiliary.c: Likewise. * config/nds32/nds32-predicates.c: Likewise. * config/nds32/nds32.c: Likewise. * config/nios2/nios2.c: Likewise. * config/nvptx/mkoffload.c: Likewise. * config/nvptx/nvptx.c: Likewise. * config/pa/pa.c: Likewise. * config/pdp11/pdp11.c: Likewise. * config/rl78/rl78-c.c: Likewise. * config/rl78/rl78.c: Likewise. * config/rs6000/host-darwin.c: Likewise. * config/rs6000/rs6000-c.c: Likewise. * config/rs6000/rs6000-linux.c: Likewise. * config/rs6000/rs6000.c: Likewise. * config/rx/rx.c: Likewise. * config/s390/s390-c.c: Likewise. * config/s390/s390.c: Likewise. * config/sh/sh-c.c: Likewise. * config/sh/sh-mem.cc: Likewise. * config/sh/sh.c: Likewise. * config/sh/sh_optimize_sett_clrt.cc: Likewise. * config/sh/sh_treg_combine.cc: Likewise. * config/sol2-c.c: Likewise. * config/sol2-cxx.c: Likewise. * config/sol2-stubs.c: Likewise. * config/sol2.c: Likewise. * config/sparc/sparc-c.c: Likewise. * config/sparc/sparc.c: Likewise. * config/spu/spu-c.c: Likewise. * config/spu/spu.c: Likewise. * config/stormy16/stormy16.c: Likewise. * config/v850/v850-c.c: Likewise. * config/v850/v850.c: Likewise. * config/vax/vax.c: Likewise. * config/visium/visium.c: Likewise. * config/vms/vms-c.c: Likewise. * config/vms/vms.c: Likewise. * config/vxworks.c: Likewise. * config/winnt-c.c: Likewise. * config/xtensa/xtensa.c: Likewise. From-SVN: r228923
generated by cgit v1.1 at 2024-11-06 19:38:30 +0000