| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Output DW_AT_entry_pc based on markers.
Introduce DW_AT_GNU_entry_view as a DWARF extension.
If views are enabled are we're not in strict compliance mode, output
DW_AT_GNU_entry_view if it might be nonzero.
This patch depends on SFN and LVU patchsets, and on the IEPM patch that
introduces the inline_entry debug hook.
for include/ChangeLog
* dwarf2.def (DW_AT_GNU_entry_view): New.
for gcc/ChangeLog
* cfgexpand.c (expand_gimple_basic_block): Handle inline entry
markers.
* dwarf2out.c (dwarf2_debug_hooks): Enable inline_entry hook.
(BLOCK_INLINE_ENTRY_LABEL): New.
(dwarf2out_var_location): Disregard inline entry markers.
(inline_entry_data): New struct.
(inline_entry_data_hasher): New hashtable type.
(inline_entry_data_hasher::hash): New.
(inline_entry_data_hasher::equal): New.
(inline_entry_data_table): New variable.
(add_high_low_attributes): Add DW_AT_entry_pc and
DW_AT_GNU_entry_view attributes if a pending entry is found
in inline_entry_data_table. Add old entry_pc attribute only
if debug nonbinding markers are disabled.
(gen_inlined_subroutine_die): Set BLOCK_DIE if nonbinding
markers are enabled.
(block_within_block_p, dwarf2out_inline_entry): New.
(dwarf2out_finish): Check that no entries remained in
inline_entry_data_table.
* final.c (reemit_insn_block_notes): Handle inline entry notes.
(final_scan_insn, notice_source_line): Likewise.
(rest_of_clean_state): Skip inline entry markers.
* gimple-pretty-print.c (dump_gimple_debug): Handle inline entry
markers.
* gimple.c (gimple_build_debug_inline_entry): New.
* gimple.h (enum gimple_debug_subcode): Add
GIMPLE_DEBUG_INLINE_ENTRY.
(gimple_build_debug_inline_entry): Declare.
(gimple_debug_inline_entry_p): New.
(gimple_debug_nonbind_marker_p): Adjust.
* insn-notes.def (INLINE_ENTRY): New.
* print-rtl.c (rtx_writer::print_rtx_operand_code_0): Handle
inline entry marker notes.
(print_insn): Likewise.
* rtl.h (NOTE_MARKER_P): Add INLINE_ENTRY support.
(INSN_DEBUG_MARKER_KIND): Likewise.
(GEN_RTX_DEBUG_MARKER_INLINE_ENTRY_PAT): New.
* tree-inline.c (expand_call_inline): Build and insert
debug_inline_entry stmt.
* tree-ssa-live.c (remove_unused_scope_block_p): Preserve
inline entry blocks early, if nonbind markers are enabled.
(dump_scope_block): Dump fragment info.
* var-tracking.c (reemit_marker_as_note): Handle inline entry note.
* doc/gimple.texi (gimple_debug_inline_entry_p): New.
(gimple_build_debug_inline_entry): New.
* doc/invoke.texi (gstatement-frontiers, gno-statement-frontiers):
Enable/disable inline entry points too.
* doc/rtl.texi (NOTE_INSN_INLINE_ENTRY): New.
(DEBUG_INSN): Describe inline entry markers.
From-SVN: r257511
|
|
PR middle-end/83694
* cfgexpand.c (expand_debug_expr): Punt if mode1 is VOIDmode
and bitsize might be greater than MAX_BITSIZE_MODE_ANY_INT.
From-SVN: r256307
|
|
PR debug/83666
* cfgexpand.c (expand_dbeug_expr) <case BIT_FIELD_REF>: Punt if mode
is BLKmode and bitpos not zero or mode change is needed.
* gcc.dg/pr83666.c: New test.
From-SVN: r256232
|
|
This patch changes TYPE_VECTOR_SUBPARTS to a poly_uint64. The value is
encoded in the 10-bit precision field and was previously always stored
as a simple log2 value. The challenge was to use this 10 bits to
encode the number of elements in variable-length vectors, so that
we didn't need to increase the size of the tree.
In practice the number of vector elements should always have the form
N + N * X (where X is the runtime value), and as for constant-length
vectors, N must be a power of 2 (even though X itself might not be).
The patch therefore uses the low 8 bits to encode log2(N) and bit
8 to select between constant-length and variable-length vectors.
Targets without variable-length vectors continue to use the old scheme.
A new valid_vector_subparts_p function tests whether a given number
of elements can be encoded. This is false for the vector modes that
represent an LD3 or ST3 vector triple (which we want to treat as arrays
of vectors rather than single vectors).
Most of the patch is mechanical; previous patches handled the changes
that weren't entirely straightforward.
2018-01-03 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* tree.h (TYPE_VECTOR_SUBPARTS): Turn into a function and handle
polynomial numbers of units.
(SET_TYPE_VECTOR_SUBPARTS): Likewise.
(valid_vector_subparts_p): New function.
(build_vector_type): Remove temporary shim and take the number
of units as a poly_uint64 rather than an int.
(build_opaque_vector_type): Take the number of units as a
poly_uint64 rather than an int.
* tree.c (build_vector_from_ctor): Handle polynomial
TYPE_VECTOR_SUBPARTS.
(type_hash_canon_hash, type_cache_hasher::equal): Likewise.
(uniform_vector_p, vector_type_mode, build_vector): Likewise.
(build_vector_from_val): If the number of units is variable,
use build_vec_duplicate_cst for constant operands and
VEC_DUPLICATE_EXPR otherwise.
(make_vector_type): Remove temporary is_constant ().
(build_vector_type, build_opaque_vector_type): Take the number of
units as a poly_uint64 rather than an int.
(check_vector_cst): Handle polynomial TYPE_VECTOR_SUBPARTS and
VECTOR_CST_NELTS.
* cfgexpand.c (expand_debug_expr): Likewise.
* expr.c (count_type_elements, categorize_ctor_elements_1): Likewise.
(store_constructor, expand_expr_real_1): Likewise.
(const_scalar_mask_from_tree): Likewise.
* fold-const-call.c (fold_const_reduction): Likewise.
* fold-const.c (const_binop, const_unop, fold_convert_const): Likewise.
(operand_equal_p, fold_vec_perm, fold_ternary_loc): Likewise.
(native_encode_vector, vec_cst_ctor_to_array): Likewise.
(fold_relational_const): Likewise.
(native_interpret_vector): Likewise. Change the size from an
int to an unsigned int.
* gimple-fold.c (gimple_fold_stmt_to_constant_1): Handle polynomial
TYPE_VECTOR_SUBPARTS.
(gimple_fold_indirect_ref, gimple_build_vector): Likewise.
(gimple_build_vector_from_val): Use VEC_DUPLICATE_EXPR when
duplicating a non-constant operand into a variable-length vector.
* hsa-brig.c (hsa_op_immed::emit_to_buffer): Handle polynomial
TYPE_VECTOR_SUBPARTS and VECTOR_CST_NELTS.
* ipa-icf.c (sem_variable::equals): Likewise.
* match.pd: Likewise.
* omp-simd-clone.c (simd_clone_subparts): Likewise.
* print-tree.c (print_node): Likewise.
* stor-layout.c (layout_type): Likewise.
* targhooks.c (default_builtin_vectorization_cost): Likewise.
* tree-cfg.c (verify_gimple_comparison): Likewise.
(verify_gimple_assign_binary): Likewise.
(verify_gimple_assign_ternary): Likewise.
(verify_gimple_assign_single): Likewise.
* tree-pretty-print.c (dump_generic_node): Likewise.
* tree-ssa-forwprop.c (simplify_vector_constructor): Likewise.
(simplify_bitfield_ref, is_combined_permutation_identity): Likewise.
* tree-vect-data-refs.c (vect_permute_store_chain): Likewise.
(vect_grouped_load_supported, vect_permute_load_chain): Likewise.
(vect_shift_permute_load_chain): Likewise.
* tree-vect-generic.c (nunits_for_known_piecewise_op): Likewise.
(expand_vector_condition, optimize_vector_constructor): Likewise.
(lower_vec_perm, get_compute_type): Likewise.
* tree-vect-loop.c (vect_determine_vectorization_factor): Likewise.
(get_initial_defs_for_reduction, vect_transform_loop): Likewise.
* tree-vect-patterns.c (vect_recog_bool_pattern): Likewise.
(vect_recog_mask_conversion_pattern): Likewise.
* tree-vect-slp.c (vect_supported_load_permutation_p): Likewise.
(vect_get_constant_vectors, vect_transform_slp_perm_load): Likewise.
* tree-vect-stmts.c (perm_mask_for_reverse): Likewise.
(get_group_load_store_type, vectorizable_mask_load_store): Likewise.
(vectorizable_bswap, simd_clone_subparts, vectorizable_assignment)
(vectorizable_shift, vectorizable_operation, vectorizable_store)
(vectorizable_load, vect_is_simple_cond, vectorizable_comparison)
(supportable_widening_operation): Likewise.
(supportable_narrowing_operation): Likewise.
* tree-vector-builder.c (tree_vector_builder::binary_encoded_nelts):
Likewise.
* varasm.c (output_constant): Likewise.
gcc/ada/
* gcc-interface/utils.c (gnat_types_compatible_p): Handle
polynomial TYPE_VECTOR_SUBPARTS.
gcc/brig/
* brigfrontend/brig-to-generic.cc (get_unsigned_int_type): Handle
polynomial TYPE_VECTOR_SUBPARTS.
* brigfrontend/brig-util.h (gccbrig_type_vector_subparts): Likewise.
gcc/c-family/
* c-common.c (vector_types_convertible_p, c_build_vec_perm_expr)
(convert_vector_to_array_for_subscript): Handle polynomial
TYPE_VECTOR_SUBPARTS.
(c_common_type_for_mode): Check valid_vector_subparts_p.
* c-pretty-print.c (pp_c_initializer_list): Handle polynomial
VECTOR_CST_NELTS.
gcc/c/
* c-typeck.c (comptypes_internal, build_binary_op): Handle polynomial
TYPE_VECTOR_SUBPARTS.
gcc/cp/
* constexpr.c (cxx_eval_array_reference): Handle polynomial
VECTOR_CST_NELTS.
(cxx_fold_indirect_ref): Handle polynomial TYPE_VECTOR_SUBPARTS.
* call.c (build_conditional_expr_1): Likewise.
* decl.c (cp_finish_decomp): Likewise.
* mangle.c (write_type): Likewise.
* typeck.c (structural_comptypes): Likewise.
(cp_build_binary_op): Likewise.
* typeck2.c (process_init_constructor_array): Likewise.
gcc/fortran/
* trans-types.c (gfc_type_for_mode): Check valid_vector_subparts_p.
gcc/lto/
* lto-lang.c (lto_type_for_mode): Check valid_vector_subparts_p.
* lto.c (hash_canonical_type): Handle polynomial TYPE_VECTOR_SUBPARTS.
gcc/go/
* go-lang.c (go_langhook_type_for_mode): Check valid_vector_subparts_p.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r256197
|
|
PR debug/83621
* cfgexpand.c (expand_debug_expr): Return NULL if mode is
BLKmode for ternary, binary or unary expressions.
* gcc.dg/pr83621.c: New test.
From-SVN: r256190
|
|
From-SVN: r256169
|
|
This patch changes the type of stack_var::size from HOST_WIDE_INT
to poly_uint64. The difference in signedness is because the
field was set by:
v->size = tree_to_uhwi (size);
2017-12-21 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* cfgexpand.c (stack_var::size): Change from a HOST_WIDE_INT
to a poly_uint64.
(add_stack_var, stack_var_cmp, partition_stack_vars)
(dump_stack_var_partition): Update accordingly.
(alloc_stack_frame_space): Take the size as a poly_int64 rather
than a HOST_WIDE_INT.
(expand_stack_vars, expand_one_stack_var_1): Handle polynomial sizes.
(defer_stack_allocation, estimated_stack_frame_size): Likewise.
(account_stack_vars, expand_one_var): Likewise. Return a poly_uint64
rather than a HOST_WIDE_INT.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r255922
|
|
This patch converts the frame allocation code (mostly in function.c)
to use poly_int64 rather than HOST_WIDE_INT for frame offsets and
sizes.
2017-12-21 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* function.h (frame_space): Change start and length from HOST_WIDE_INT
to poly_int64.
(get_frame_size): Return the size as a poly_int64 rather than a
HOST_WIDE_INT.
(frame_offset_overflow): Take the offset as a poly_int64 rather
than a HOST_WIDE_INT.
(assign_stack_local_1, assign_stack_local, assign_stack_temp_for_type)
(assign_stack_temp): Likewise for the size.
* function.c (get_frame_size): Return a poly_int64 rather than
a HOST_WIDE_INT.
(frame_offset_overflow): Take the offset as a poly_int64 rather
than a HOST_WIDE_INT.
(try_fit_stack_local): Take the start, length and size as poly_int64s
rather than HOST_WIDE_INTs. Return the offset as a poly_int64_pod
rather than a HOST_WIDE_INT.
(add_frame_space): Take the start and end as poly_int64s rather than
HOST_WIDE_INTs.
(assign_stack_local_1, assign_stack_local, assign_stack_temp_for_type)
(assign_stack_temp): Likewise for the size.
(temp_slot): Change size, base_offset and full_size from HOST_WIDE_INT
to poly_int64.
(find_temp_slot_from_address): Handle polynomial offsets.
(combine_temp_slots): Likewise.
* emit-rtl.h (rtl_data::x_frame_offset): Change from HOST_WIDE_INT
to poly_int64.
* cfgexpand.c (alloc_stack_frame_space): Return the offset as a
poly_int64 rather than a HOST_WIDE_INT.
(expand_one_stack_var_at): Take the offset as a poly_int64 rather
than a HOST_WIDE_INT.
(expand_stack_vars, expand_one_stack_var_1, expand_used_vars): Handle
polynomial frame offsets.
* config/m32r/m32r-protos.h (m32r_compute_frame_size): Take the size
as a poly_int64 rather than an int.
* config/m32r/m32r.c (m32r_compute_frame_size): Likewise.
* config/v850/v850-protos.h (compute_frame_size): Likewise.
* config/v850/v850.c (compute_frame_size): Likewise.
* config/xtensa/xtensa-protos.h (compute_frame_size): Likewise.
* config/xtensa/xtensa.c (compute_frame_size): Likewise.
* config/pa/pa-protos.h (pa_compute_frame_size): Likewise.
* config/pa/pa.c (pa_compute_frame_size): Likewise.
* explow.h (get_dynamic_stack_base): Take the offset as a poly_int64
rather than a HOST_WIDE_INT.
* explow.c (get_dynamic_stack_base): Likewise.
* final.c (final_start_function): Use the constant lower bound
of the frame size for -Wframe-larger-than.
* ira.c (do_reload): Adjust for new get_frame_size return type.
* lra.c (lra): Likewise.
* reload1.c (reload): Likewise.
* config/avr/avr.c (avr_asm_function_end_prologue): Likewise.
* config/pa/pa.h (EXIT_IGNORE_STACK): Likewise.
* rtlanal.c (get_initial_register_offset): Return the offset as
a poly_int64 rather than a HOST_WIDE_INT.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r255917
|
|
Make sure that gimple and RTL IRs don't have debug markers before
labels. When we build the CFG, we move labels before any markers
appearing before them. Then, make sure we don't mistakenly
reintroduce them.
This reverts some of the complexity that had been brought about by the
initial SFN patches.
for gcc/ChangeLog
PR bootstrap/83396
* cfgexpand.c (label_rtx_for_bb): Revert SFN changes that
allowed debug stmts before labels.
(expand_gimple_basic_block): Likewise.
* gimple-iterator.c (gimple_find_edge_insert_loc): Likewise.
* gimple-iterator.h (gsi_after_labels): Likewise.
* tree-cfgcleanup (remove_forwarder_block): Likewise, but
rename reused variable, and simplify using gsi_move_before.
* tree-ssa-tail-merge.c (find_duplicate): Likewise.
* tree-cfg.c (make_edges, cleanup_dead_labels): Likewise.
(gimple_can_merge_blocks_p, verify_gimple_in_cfg): Likewise.
(gimple_verify_flow_info, gimple_block_label): Likewise.
(make_blocks): Move debug markers after adjacent labels.
* cfgrtl.c (skip_insns_after_block): Revert SFN changes that
allowed debug insns outside blocks.
* df-scan.c (df_insn_delete): Likewise.
* lra-constraints.c (update_ebb_live_info): Likewise.
* var-tracking.c (get_first_insn, vt_emit_notes): Likewise.
(vt_initialize, delete_vta_debug_insns): Likewise.
(reemit_marker_as_note): Drop BB parm. Adjust callers.
From-SVN: r255895
|
|
This patch makes expand_debug_expr track polynomial memory offsets.
It simplifies the handling of the case in which the reference is not
to the first byte of the base, which seemed non-trivial enough to
make it worth splitting out as a separate patch.
2017-12-20 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* tree.h (get_inner_reference): Add a version that returns the
offset and size as poly_int64_pods rather than HOST_WIDE_INTs.
* cfgexpand.c (expand_debug_expr): Track polynomial offsets. Simply
the case in which bitpos is not associated with the first byte.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r255892
|
|
This patch changes the types of the bit offsets and sizes returned
by get_ref_base_and_extent to poly_int64.
There are some callers that can't sensibly operate on polynomial
offsets or handle cases where the offset and size aren't known
exactly. This includes the IPA devirtualisation code (since
there's no defined way of having vtables at variable offsets)
and some parts of the DWARF code. The patch therefore adds
a helper function get_ref_base_and_extent_hwi that either returns
exact HOST_WIDE_INT bit positions and sizes or returns a null
base to indicate failure.
2017-12-20 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* tree-dfa.h (get_ref_base_and_extent): Return the base, size and
max_size as poly_int64_pods rather than HOST_WIDE_INTs.
(get_ref_base_and_extent_hwi): Declare.
* tree-dfa.c (get_ref_base_and_extent): Return the base, size and
max_size as poly_int64_pods rather than HOST_WIDE_INTs.
(get_ref_base_and_extent_hwi): New function.
* cfgexpand.c (expand_debug_expr): Update call to
get_ref_base_and_extent.
* dwarf2out.c (add_var_loc_to_decl): Likewise.
* gimple-fold.c (get_base_constructor): Return the offset as a
poly_int64_pod rather than a HOST_WIDE_INT.
(fold_const_aggregate_ref_1): Track polynomial sizes and offsets.
* ipa-polymorphic-call.c
(ipa_polymorphic_call_context::set_by_invariant)
(extr_type_from_vtbl_ptr_store): Track polynomial offsets.
(ipa_polymorphic_call_context::ipa_polymorphic_call_context)
(check_stmt_for_type_change): Use get_ref_base_and_extent_hwi
rather than get_ref_base_and_extent.
(ipa_polymorphic_call_context::get_dynamic_type): Likewise.
* ipa-prop.c (ipa_load_from_parm_agg, compute_complex_assign_jump_func)
(get_ancestor_addr_info, determine_locally_known_aggregate_parts):
Likewise.
* ipa-param-manipulation.c (ipa_get_adjustment_candidate): Update
call to get_ref_base_and_extent.
* tree-sra.c (create_access, get_access_for_expr): Likewise.
* tree-ssa-alias.c (ao_ref_base, aliasing_component_refs_p)
(stmt_kills_ref_p): Likewise.
* tree-ssa-dce.c (mark_aliased_reaching_defs_necessary_1): Likewise.
* tree-ssa-scopedtables.c (avail_expr_hash, equal_mem_array_ref_p):
Likewise.
* tree-ssa-sccvn.c (vn_reference_lookup_3): Likewise.
Use get_ref_base_and_extent_hwi rather than get_ref_base_and_extent
when calling native_encode_expr.
* tree-ssa-structalias.c (get_constraint_for_component_ref): Update
call to get_ref_base_and_extent.
(do_structure_copy): Use get_ref_base_and_extent_hwi rather than
get_ref_base_and_extent.
* var-tracking.c (track_expr_p): Likewise.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r255886
|
|
This patch adds a tree representation for poly_ints. Unlike the
rtx version, the coefficients are INTEGER_CSTs rather than plain
integers, so that we can easily access them as poly_widest_ints
and poly_offset_ints.
The patch also adjusts some places that previously
relied on "constant" meaning "INTEGER_CST". It also makes
sure that the TYPE_SIZE agrees with the TYPE_SIZE_UNIT for
vector booleans, given the existing:
/* Several boolean vector elements may fit in a single unit. */
if (VECTOR_BOOLEAN_TYPE_P (type)
&& type->type_common.mode != BLKmode)
TYPE_SIZE_UNIT (type)
= size_int (GET_MODE_SIZE (type->type_common.mode));
else
TYPE_SIZE_UNIT (type) = int_const_binop (MULT_EXPR,
TYPE_SIZE_UNIT (innertype),
size_int (nunits));
2017-12-20 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* doc/generic.texi (POLY_INT_CST): Document.
* tree.def (POLY_INT_CST): New tree code.
* treestruct.def (TS_POLY_INT_CST): New tree layout.
* tree-core.h (tree_poly_int_cst): New struct.
(tree_node): Add a poly_int_cst field.
* tree.h (POLY_INT_CST_P, POLY_INT_CST_COEFF): New macros.
(wide_int_to_tree, force_fit_type): Take a poly_wide_int_ref
instead of a wide_int_ref.
(build_int_cst, build_int_cst_type): Take a poly_int64 instead
of a HOST_WIDE_INT.
(build_int_cstu, build_array_type_nelts): Take a poly_uint64
instead of an unsigned HOST_WIDE_INT.
(build_poly_int_cst, tree_fits_poly_int64_p, tree_fits_poly_uint64_p)
(ptrdiff_tree_p): Declare.
(tree_to_poly_int64, tree_to_poly_uint64): Likewise. Provide
extern inline implementations if the target doesn't use POLY_INT_CST.
(poly_int_tree_p): New function.
(wi::unextended_tree): New class.
(wi::int_traits <unextended_tree>): New override.
(wi::extended_tree): Add a default constructor.
(wi::extended_tree::get_tree): New function.
(wi::widest_extended_tree, wi::offset_extended_tree): New typedefs.
(wi::tree_to_widest_ref, wi::tree_to_offset_ref): Use them.
(wi::tree_to_poly_widest_ref, wi::tree_to_poly_offset_ref)
(wi::tree_to_poly_wide_ref): New typedefs.
(wi::ints_for): Provide overloads for extended_tree and
unextended_tree.
(poly_int_cst_value, wi::to_poly_widest, wi::to_poly_offset)
(wi::to_wide): New functions.
(wi::fits_to_boolean_p, wi::fits_to_tree_p): Handle poly_ints.
* tree.c (poly_int_cst_hasher): New struct.
(poly_int_cst_hash_table): New variable.
(tree_node_structure_for_code, tree_code_size, simple_cst_equal)
(valid_constant_size_p, add_expr, drop_tree_overflow): Handle
POLY_INT_CST.
(initialize_tree_contains_struct): Handle TS_POLY_INT_CST.
(init_ttree): Initialize poly_int_cst_hash_table.
(build_int_cst, build_int_cst_type, build_invariant_address): Take
a poly_int64 instead of a HOST_WIDE_INT.
(build_int_cstu, build_array_type_nelts): Take a poly_uint64
instead of an unsigned HOST_WIDE_INT.
(wide_int_to_tree): Rename to...
(wide_int_to_tree_1): ...this.
(build_new_poly_int_cst, build_poly_int_cst): New functions.
(force_fit_type): Take a poly_wide_int_ref instead of a wide_int_ref.
(wide_int_to_tree): New function that takes a poly_wide_int_ref.
(ptrdiff_tree_p, tree_to_poly_int64, tree_to_poly_uint64)
(tree_fits_poly_int64_p, tree_fits_poly_uint64_p): New functions.
* lto-streamer-out.c (DFS::DFS_write_tree_body, hash_tree): Handle
TS_POLY_INT_CST.
* tree-streamer-in.c (lto_input_ts_poly_tree_pointers): Likewise.
(streamer_read_tree_body): Likewise.
* tree-streamer-out.c (write_ts_poly_tree_pointers): Likewise.
(streamer_write_tree_body): Likewise.
* tree-streamer.c (streamer_check_handled_ts_structures): Likewise.
* asan.c (asan_protect_global): Require the size to be an INTEGER_CST.
* cfgexpand.c (expand_debug_expr): Handle POLY_INT_CST.
* expr.c (expand_expr_real_1, const_vector_from_tree): Likewise.
* gimple-expr.h (is_gimple_constant): Likewise.
* gimplify.c (maybe_with_size_expr): Likewise.
* print-tree.c (print_node): Likewise.
* tree-data-ref.c (data_ref_compare_tree): Likewise.
* tree-pretty-print.c (dump_generic_node): Likewise.
* tree-ssa-address.c (addr_for_mem_ref): Likewise.
* tree-vect-data-refs.c (dr_group_sort_cmp): Likewise.
* tree-vrp.c (compare_values_warnv): Likewise.
* tree-ssa-loop-ivopts.c (determine_base_object, constant_multiple_of)
(get_loop_invariant_expr, add_candidate_1, get_computation_aff_1)
(force_expr_to_var_cost): Likewise.
* tree-ssa-loop.c (for_each_index): Likewise.
* fold-const.h (build_invariant_address, size_int_kind): Take a
poly_int64 instead of a HOST_WIDE_INT.
* fold-const.c (fold_negate_expr_1, const_binop, const_unop)
(fold_convert_const, multiple_of_p, fold_negate_const): Handle
POLY_INT_CST.
(size_binop_loc): Likewise. Allow int_const_binop_1 to fail.
(int_const_binop_2): New function, split out from...
(int_const_binop_1): ...here. Handle POLY_INT_CST.
(size_int_kind): Take a poly_int64 instead of a HOST_WIDE_INT.
* expmed.c (make_tree): Handle CONST_POLY_INT_P.
* gimple-ssa-strength-reduction.c (slsr_process_add)
(slsr_process_mul): Check for INTEGER_CSTs before using them
as candidates.
* stor-layout.c (bits_from_bytes): New function.
(bit_from_pos): Use it.
(layout_type): Likewise. For vectors, multiply the TYPE_SIZE_UNIT
by BITS_PER_UNIT to get the TYPE_SIZE.
* tree-cfg.c (verify_expr, verify_types_in_gimple_reference): Allow
MEM_REF and TARGET_MEM_REF offsets to be a POLY_INT_CST.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r255863
|
|
Emitting markers before labels turned out to not be worth the trouble.
The markers outside BBs confuse the ebb scheduler, and they don't add
any useful information. I'll arrange for markers to be moved past
labels, even in gimple, but for now this will fix the two remaining
known problems on ia64.
for gcc/ChangeLog
PR bootstrap/83396
* cfgexpand.c (expand_gimple_basic_block): Expand label first,
even if there are markers before it.
* cfgrtl.c (rtl_verify_bb_layout): Reject DEBUG_INSNs outside BBs.
From-SVN: r255833
|
|
conditions.
* read-rtl.c (parse_reg_note_name): Replace Yoda conditions with
typical order conditions.
* sel-sched.c (extract_new_fences_from): Likewise.
* config/visium/constraints.md (J, K, L): Likewise.
* config/visium/predicates.md (const_shift_operand): Likewise.
* config/visium/visium.c (visium_legitimize_address,
visium_legitimize_reload_address): Likewise.
* config/m68k/m68k.c (output_reg_adjust, emit_reg_adjust): Likewise.
* config/arm/arm.c (arm_block_move_unaligned_straight): Likewise.
* config/avr/constraints.md (Y01, Ym1, Y02, Ym2): Likewise.
* config/avr/avr-log.c (avr_vdump, avr_log_set_avr_log,
SET_DUMP_DETAIL): Likewise.
* config/avr/predicates.md (const_8_16_24_operand): Likewise.
* config/avr/avr.c (STR_PREFIX_P, avr_popcount_each_byte,
avr_is_casesi_sequence, avr_casei_sequence_check_operands,
avr_set_core_architecture, avr_set_current_function,
avr_legitimize_reload_address, avr_asm_len, avr_print_operand,
output_movqi, output_movsisf, avr_out_plus, avr_out_bitop,
avr_out_fract, avr_adjust_insn_length, avr_encode_section_info,
avr_2word_insn_p, output_reload_in_const, avr_has_nibble_0xf,
avr_map_decompose, avr_fold_builtin): Likewise.
* config/avr/driver-avr.c (avr_devicespecs_file): Likewise.
* config/avr/gen-avr-mmcu-specs.c (str_prefix_p, print_mcu): Likewise.
* config/i386/i386.c (ix86_parse_stringop_strategy_string): Likewise.
* config/m32c/m32c-pragma.c (m32c_pragma_memregs): Likewise.
* config/m32c/m32c.c (m32c_conditional_register_usage,
m32c_address_cost): Likewise.
* config/m32c/predicates.md (shiftcount_operand,
longshiftcount_operand): Likewise.
* config/iq2000/iq2000.c (iq2000_expand_prologue): Likewise.
* config/nios2/nios2.c (nios2_handle_custom_fpu_insn_option,
can_use_cdx_ldstw): Likewise.
* config/nios2/nios2.h (CDX_REG_P): Likewise.
* config/cr16/cr16.h (RETURN_ADDR_RTX, REGNO_MODE_OK_FOR_BASE_P):
Likewise.
* config/cr16/cr16.md (*mov<mode>_double): Likewise.
* config/cr16/cr16.c (cr16_create_dwarf_for_multi_push): Likewise.
* config/h8300/h8300.c (h8300_rtx_costs, get_shift_alg): Likewise.
* config/vax/constraints.md (U06, U08, U16, CN6, S08, S16): Likewise.
* config/vax/vax.c (adjacent_operands_p): Likewise.
* config/ft32/constraints.md (L, b, KA): Likewise.
* config/ft32/ft32.c (ft32_load_immediate, ft32_expand_prologue):
Likewise.
* cfgexpand.c (expand_stack_alignment): Likewise.
* gcse.c (insert_expr_in_table): Likewise.
* print-rtl.c (rtx_writer::print_rtx_operand_codes_E_and_V): Likewise.
* cgraphunit.c (cgraph_node::expand): Likewise.
* ira-build.c (setup_min_max_allocno_live_range_point): Likewise.
* emit-rtl.c (add_insn): Likewise.
* input.c (dump_location_info): Likewise.
* passes.c (NEXT_PASS): Likewise.
* read-rtl-function.c (parse_note_insn_name,
function_reader::read_rtx_operand_r, function_reader::parse_mem_expr):
Likewise.
* sched-rgn.c (sched_rgn_init): Likewise.
* diagnostic-show-locus.c (layout::show_ruler): Likewise.
* combine.c (find_split_point, simplify_if_then_else, force_to_mode,
if_then_else_cond, simplify_shift_const_1, simplify_comparison): Likewise.
* explow.c (eliminate_constant_term): Likewise.
* final.c (leaf_renumber_regs_insn): Likewise.
* cfgrtl.c (print_rtl_with_bb): Likewise.
* genhooks.c (emit_init_macros): Likewise.
* poly-int.h (maybe_ne, maybe_le, maybe_lt): Likewise.
* tree-data-ref.c (conflict_fn): Likewise.
* selftest.c (assert_streq): Likewise.
* expr.c (store_constructor_field, expand_expr_real_1): Likewise.
* fold-const.c (fold_range_test, extract_muldiv_1, fold_truth_andor,
fold_binary_loc, multiple_of_p): Likewise.
* reload.c (push_reload, find_equiv_reg): Likewise.
* et-forest.c (et_nca, et_below): Likewise.
* dbxout.c (dbxout_symbol_location): Likewise.
* reorg.c (relax_delay_slots): Likewise.
* dojump.c (do_compare_rtx_and_jump): Likewise.
* gengtype-parse.c (type): Likewise.
* simplify-rtx.c (simplify_gen_ternary, simplify_gen_relational,
simplify_const_relational_operation): Likewise.
* reload1.c (do_output_reload): Likewise.
* dumpfile.c (get_dump_file_info_by_switch): Likewise.
* gengtype.c (type_for_name): Likewise.
* gimple-ssa-sprintf.c (format_directive): Likewise.
ada/
* gcc-interface/trans.c (Loop_Statement_to_gnu): Replace Yoda
conditions with typical order conditions.
* gcc-interface/misc.c (gnat_get_array_descr_info,
default_pass_by_ref): Likewise.
* gcc-interface/decl.c (gnat_to_gnu_entity): Likewise.
* adaint.c (__gnat_tmp_name): Likewise.
c-family/
* known-headers.cc (get_stdlib_header_for_name): Replace Yoda
conditions with typical order conditions.
c/
* c-typeck.c (comptypes_internal, function_types_compatible_p,
perform_integral_promotions, digest_init): Replace Yoda conditions
with typical order conditions.
* c-decl.c (check_bitfield_type_and_width): Likewise.
cp/
* name-lookup.c (get_std_name_hint): Replace Yoda conditions with
typical order conditions.
* class.c (check_bitfield_decl): Likewise.
* pt.c (convert_template_argument): Likewise.
* decl.c (duplicate_decls): Likewise.
* typeck.c (commonparms): Likewise.
fortran/
* scanner.c (preprocessor_line): Replace Yoda conditions with typical
order conditions.
* dependency.c (check_section_vs_section): Likewise.
* trans-array.c (gfc_conv_expr_descriptor): Likewise.
jit/
* jit-playback.c (get_type, playback::compile_to_file::copy_file,
playback::context::acquire_mutex): Replace Yoda conditions with
typical order conditions.
* libgccjit.c (gcc_jit_context_new_struct_type,
gcc_jit_struct_set_fields, gcc_jit_context_new_union_type,
gcc_jit_context_new_function, gcc_jit_timer_pop): Likewise.
* jit-builtins.c (matches_builtin): Likewise.
* jit-recording.c (recording::compound_type::set_fields,
recording::fields::write_reproducer, recording::rvalue::set_scope,
recording::function::validate): Likewise.
* jit-logging.c (logger::decref): Likewise.
From-SVN: r255831
|
|
gcc/c-family/ChangeLog:
PR tree-optimization/78918
* c-common.c (check_function_restrict): Avoid checking built-ins.
* c.opt (-Wrestrict): Include in -Wall.
gcc/ChangeLog:
PR tree-optimization/78918
* Makefile.in (OBJS): Add gimple-ssa-warn-restrict.o.
* builtins.c (check_sizes): Rename...
(check_access): ...to this. Rename function arguments for clarity.
(check_memop_sizes): Adjust names.
(expand_builtin_memchr, expand_builtin_memcpy): Same.
(expand_builtin_memmove, expand_builtin_mempcpy): Same.
(expand_builtin_strcat, expand_builtin_stpncpy): Same.
(check_strncat_sizes, expand_builtin_strncat): Same.
(expand_builtin_strncpy, expand_builtin_memset): Same.
(expand_builtin_bzero, expand_builtin_memcmp): Same.
(expand_builtin_memory_chk, maybe_emit_chk_warning): Same.
(maybe_emit_sprintf_chk_warning): Same.
(expand_builtin_strcpy): Adjust.
(expand_builtin_stpcpy): Same.
(expand_builtin_with_bounds): Detect out-of-bounds accesses
in pointer-checking forms of memcpy, memmove, and mempcpy.
(gcall_to_tree_minimal, max_object_size): Define new functions.
* builtins.h (max_object_size): Declare.
* calls.c (alloc_max_size): Call max_object_size instead of
hardcoding ssizetype limit.
(get_size_range): Handle new argument.
* calls.h (get_size_range): Add a new argument.
* cfgexpand.c (expand_call_stmt): Propagate no-warning bit.
* doc/invoke.texi (-Wrestrict): Adjust, add example.
* gimple-fold.c (gimple_fold_builtin_memory_op): Detect overlapping
operations.
(gimple_fold_builtin_memory_chk): Same.
(gimple_fold_builtin_stxcpy_chk): New function.
* gimple-ssa-warn-restrict.c: New source.
* gimple-ssa-warn-restrict.h: New header.
* gimple.c (gimple_build_call_from_tree): Propagate location.
* passes.def (pass_warn_restrict): Add new pass.
* tree-pass.h (make_pass_warn_restrict): Declare.
* tree-ssa-strlen.c (handle_builtin_strcpy): Detect overlapping
operations.
(handle_builtin_strcat): Same.
(strlen_optimize_stmt): Rename...
(strlen_check_and_optimize_stmt): ...to this. Handle strncat,
stpncpy, strncpy, and their checking forms.
gcc/testsuite/ChangeLog:
PR tree-optimization/78918
* c-c++-common/Warray-bounds.c: New test.
* c-c++-common/Warray-bounds-2.c: New test.
* c-c++-common/Warray-bounds-3.c: New test.
* c-c++-common/Warray-bounds-4.c: New test.
* c-c++-common/Warray-bounds-5.c: New test.
* c-c++-common/Wrestrict-2.c: New test.
* c-c++-common/Wrestrict.c: New test.
* c-c++-common/Wrestrict.s: New test.
* c-c++-common/Wsizeof-pointer-memaccess1.c: Adjust
* c-c++-common/Wsizeof-pointer-memaccess2.c: Same.
* g++.dg/torture/Wsizeof-pointer-memaccess1.C: Same.
* g++.dg/torture/Wsizeof-pointer-memaccess2.C: Same.
* gcc.dg/range.h: New header.
* gcc.dg/memcpy-6.c: New test.
* gcc.dg/pr69172.c: Adjust.
* gcc.dg/pr79223.c: Same.
* gcc.dg/pr81345.c: Adjust.
* gcc.dg/Wobjsize-1.c: Same.
* gcc.dg/Wrestrict-2.c: New test.
* gcc.dg/Wrestrict.c: New test.
* gcc.dg/Wsizeof-pointer-memaccess1.c: Adjust.
* gcc.dg/builtin-stpncpy.c: Same.
* gcc.dg/builtin-stringop-chk-1.c: Same.
* gcc.target/i386/chkp-stropt-17.c: New test.
* gcc.dg/torture/Wsizeof-pointer-memaccess1.c: Adjust.
From-SVN: r255755
|
|
Similarly to the VEC_DUPLICATE_EXPR, this patch adds a tree code
equivalent of the VEC_SERIES rtx code: VEC_SERIES_EXPR.
2017-12-16 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* doc/generic.texi (VEC_SERIES_EXPR): Document.
* doc/md.texi (vec_series@var{m}): Document.
* tree.def (VEC_SERIES_EXPR): New tree code.
* tree.h (build_vec_series): Declare.
* tree.c (build_vec_series): New function.
* cfgexpand.c (expand_debug_expr): Handle VEC_SERIES_EXPR.
* tree-pretty-print.c (dump_generic_node): Likewise.
* gimple-pretty-print.c (dump_binary_rhs): Likewise.
* tree-inline.c (estimate_operator_cost): Likewise.
* expr.c (expand_expr_real_2): Likewise.
* optabs-tree.c (optab_for_tree_code): Likewise.
* tree-cfg.c (verify_gimple_assign_binary): Likewise.
* fold-const.c (const_binop): Fold VEC_SERIES_EXPRs of constants.
* expmed.c (make_tree): Handle VEC_SERIES.
* optabs.def (vec_series_optab): New optab.
* optabs.h (expand_vec_series_expr): Declare.
* optabs.c (expand_vec_series_expr): New function.
* tree-vect-generic.c (expand_vector_operations_1): Check that
the operands also have vector type.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r255741
|
|
SVE needs a way of broadcasting a scalar to a variable-length vector.
This patch adds VEC_DUPLICATE_EXPR for when CONSTRUCTOR would be used
for fixed-length vectors; this is the tree equivalent of the existing
rtl code VEC_DUPLICATE.
The patch also adds a vec_duplicate_optab to go with VEC_DUPLICATE_EXPR.
2017-12-16 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hawyard@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* doc/generic.texi (VEC_DUPLICATE_EXPR): Document.
(VEC_COND_EXPR): Add missing @tindex.
* doc/md.texi (vec_duplicate@var{m}): Document.
* tree.def (VEC_DUPLICATE_EXPR): New tree codes.
* tree.c (build_vector_from_val): Add stubbed-out handling of
variable-length vectors, using VEC_DUPLICATE_EXPR.
(uniform_vector_p): Handle VEC_DUPLICATE_EXPR.
* cfgexpand.c (expand_debug_expr): Likewise.
* tree-cfg.c (verify_gimple_assign_unary): Likewise.
* tree-inline.c (estimate_operator_cost): Likewise.
* tree-pretty-print.c (dump_generic_node): Likewise.
* tree-vect-generic.c (ssa_uniform_vector_p): Likewise.
* fold-const.c (const_unop): Fold VEC_DUPLICATE_EXPRs of a constant.
(test_vec_duplicate_folding): New function.
(fold_const_c_tests): Call it.
* optabs.def (vec_duplicate_optab): New optab.
* optabs-tree.c (optab_for_tree_code): Handle VEC_DUPLICATE_EXPR.
* optabs.h (expand_vector_broadcast): Declare.
* optabs.c (expand_vector_broadcast): Make non-static. Try using
vec_duplicate_optab.
* expr.c (store_constructor): Try using vec_duplicate_optab for
uniform vectors.
(expand_expr_real_2): Handle VEC_DUPLICATE_EXPR.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r255740
|
|
This patch completes the infrastructure for the introduction of
statement frontiers in C-family languages.
It brings in all the code remaining code needed to introduce and
transform begin stmt trees, gimple stmts, insns and notes, and
ultimately use them to generate the is_stmt column in DWARF2+ line
number tables/programs, however none of it is activated: the option
that would do so will be introduced in a subsequent patch.
This patch depends on an earlier patch with not-quite-boilerplate
changes towards SFN.
for gcc/c-family/ChangeLog
* c-semantics.c (pop_stmt_list): Move begin stmt marker into
subsequent statement list.
for gcc/c/ChangeLog
* c-objc-common.h (LANG_HOOKS_EMITS_BEGIN_STMT): Redefine as true.
* c-parser.c (add_debug_begin_stmt): New.
(c_parser_declaration_or_fndef): Call it.
(c_parser_compound_statement_nostart): Likewise.
(c_parser_statement_after_labels): Likewise.
* c-typeck (c_finish_stmt_expr): Skip begin stmts markers.
for gcc/cp/ChangeLog
* constexpr.c (check_constexpr_ctor_body_1): Skip begin stmt
markers.
(constexpr_fn_retval): Likewise.
(potential_constant_expression_1): Likewise.
(cxx_eval_statement_list): Check that a begin stmt marker is
not used as the value of a statement list.
(cxx_eval_constant_expression): Return begin stmt markers
unchanged.
* cp-array-notation.c (stmt_location): New.
(cp_expand_cond_array_notations): Use it.
* cp-objcp-common.h (LANG_HOOKS_EMITS_BEGIN_STMT): Redefine as true.
* parser.c (add_debug_begin_stmt): New.
(cp_parser_statement): Call it.
* pt.c (tsubst_copy): Handle begin stmt markers.
for gcc/ChangeLog
* cfgexpand.c (expand_gimple_basic_block): Handle begin stmt
markers. Integrate source bind into debug stmt expand loop.
(pass_expand::execute): Check debug marker limit. Avoid deep
TER and expand debug locations for debug bind insns only.
* cse.c (insn_live_p): Keep nonbind markers and debug bindings
followed by them.
* df-scan.c (df_insn_delete): Accept out-of-block debug insn.
* final.c (reemit_insn_block_notes): Take current block from
nonbind markers. Declare note where it's first set.
(final_scan_insn): Handle begin stmt notes. Emit is_stmt according to
begin stmt markers if enabled.
(notice_source_line): Handle nonbind markers. Fail if their
location is unknown or that of builtins.
(rest_of_handle_final): Convert begin stmt markers to notes if
var-tracking didn't run.
(rest_of_clean_state): Skip begin stmt markers.
* gimple-pretty-print.c (dump_gimple_debug): Handle begin stmt
markers.
* function.c (allocate_struct_function): Set begin_stmt_markers.
* function.h (struct function): Add debug_marker_count counter
and debug_nonbind_markers flag.
* gimple-iterator.c (gsi_remove): Adjust debug_marker_count.
* gimple-low.c (lower_function_body): Adjust
debug_nonbind_markers.
(lower_stmt): Drop or skip gimple debug stmts.
(lower_try_catch): Skip debug stmts.
* gimple.c (gimple_build_debug_begin_stmt): New.
(gimple_copy): Increment debug_marker_count if copying one.
* gimple.h (gimple_build_debug_begin_stmt): Declare.
* gimplify.c (rexpr_location): New.
(rexpr_has_location): New.
(warn_switch_unreachable_r): Handle gimple debug stmts.
(shortcut_cond_r): Call expr_location.
(find_goto): New.
(find_goto_label): New.
(shortcut_cond_expr): Call expr_has_location, expr_location, and
find_goto_label.
(gimplify_cond_expr): Call find_goto_label, expr_has_location, and
expr_location.
(gimplify_expr): Handle begin stmt markers. Reject debug expr decls.
* langhooks-def.h (LANG_HOOKS_EMITS_BEGIN_STMT): New. Add to...
(LANG_HOOKS_INITIALIZER): ... this.
* langhooks.h (struct lang_hooks): Add emits_begin_stmt.
* lra-contraints.c (inherit_reload_reg): Tolerate between-blocks
debug insns.
(update_ebb_live_info): Skip debug insn markers.
* lra.c (debug_insn_static_data): Rename to...
(debug_bind_static_data): ... this.
(debug_marker_static_data): New.
(lra_set_insn_recog_data): Select one of the above depending
on debug insn kind.
(lra_update_isn_regno_info): Don't assume debug insns have
freqs.
(push_insns): Skip debug insns.
* lto-streamer-in.c (input_function): Drop debug stmts
depending on active options. Adjust debug_nonbind_markers.
* params.def (PARAM_MAX_DEBUG_MARKER_COUNT): New.
* print-rtl.c (rtx_writer::print_rtx_operand_code_0): Handle
begin stmt marker notes.
(print_insn): Likewise.
* recog.c (extract_insn): Recognize rtl for debug markers.
* rtl.def (DEBUG_MARKER): New.
* tree-inline.c: Include params.h.
(remap_gimple_stmt): Handle nonbind markers.
(maybe_move_debug_stmts_to_successors): Likewise.
(copy_debug_stmt): Likewise.
* tree-iterator.c (append_to_statement_list_1): Append begin stmt
markers regardless of no side effects.
(tsi_link_before): Don't update container's side effects when adding
a begin stmt marker.
(tsi_link_after): Likewise.
(expr_first): Skip begin stmt markers.
(expr_last): Likewise.
* tree-pretty-print (dump_generic_node): Handle begin stmt markers.
* tree-ssa-threadedge.c (propagate_threaded_block_debug_info):
Disregard nonbind markers.
* tree.c (make_node_stat): Don't set side effects for begin stmt
markers.
(build1_stat): Likewise.
* tree.def (DEBUG_BEGIN_STMT): New.
* tree.h (GOTO_DESTINATION): Require a GOTO_EXPR.
* var-tracking.c (delete_debug_insns): Renamed to...
(delete_vta_debug_insns): ... this.
(reemit_marker_as_note): New.
(vt_initialize): Reemit markers.
(delete_vta_debug_insns): Likewise.
(vt_debug_insns_local): Reemit or delete markers.
(variable_tracking_main_1): Likewise.
* doc/generic.texi (DEBUG_BEGIN_STMT): Document.
* doc/gimple.texi (gimple_debug_begin_stmt_p): New.
(gimple_debug_nonbind_marker_p): New.
(gimple_build_debug_bind): Adjust.
(gimple_build_debug_begin_stmt): New.
* doc/invoke.texi (max-debug-marker-count): New param.
* doc/rtl.texi (debug_implicit_ptr, entry_value): New.
(debug_parameter_ref, debug_marker): New.
(NOTE_INSN_BEGIN_STMT): New.
(DEBUG_INSN): Describe begin stmt markers.
From-SVN: r255568
|
|
This patch adjusts numerous parts of the compiler that would
malfunction should they find debug markers at points where they may be
introduced. The changes purport to allow the compiler to pass
bootstrap-debug-lean (-fcompare-debug in stage3) at various
optimization levels, as well as bootstrap-debug-lib (-fcompare-debug
for target libraries), even after the compiler is changed so that
debug markers are introduced in code streams at spots where earlier
debug stmts, insns and notes wouldn't normally appear.
This patch depends on an earlier SFN boilerplate patch, and on another
SFN patch that introduces new RTL insn-walking functions.
for gcc/ChangeLog
* cfgcleanup.c (delete_unreachable_blocks): Use alternate
block removal order if MAY_HAVE_DEBUG_BIND_INSNS.
* cfgexpand.c (label_rtx_for_bb): Skip debug insns.
* cfgrtl.c (try_redirect_by_replacing_jump): Skip debug insns.
(rtl_tidy_fallthru_edge): Likewise.
(rtl_verify_fallthru): Likewise.
(rtl_verify_bb_layout): Likewise.
(skip_insns_after_block): Likewise.
(duplicate_insn_chain): Use DEBUG_BIND_INSN_P.
* dwarf2out.c: Include print-rtl.h.
(dwarf2out_next_real_insn): New.
(dwarf2out_var_location): Call it. Disregard begin stmt markers.
Dump debug binds in asm comments.
* gimple-iterator.c (gimple_find_edge_insert_loc): Skip debug stmts.
* gimple-iterator.h (gsi_start_bb_nondebug): Remove; adjust
callers to use gsi_start_nondebug_bb instead.
(gsi_after_labels): Skip gimple debug stmts.
(gsi_start_nondebug): New.
* gimple-loop-interchange.c (find_deps_in_bb_for_stmt): Adjust.
(proper_loop_form_for_interchange): Adjust.
* gimple-low.c (gimple_seq_may_fallthru): Take last nondebug stmt.
* gimple.h (gimple_seq_last_nondebug_stmt): New.
* gimplify.c (last_stmt_in_scope): Skip debug stmts.
(collect_fallthrough_labels): Likewise.
(should_warn_for_implicit_fallthrough): Likewise.
(warn_implicit_fallthrough_r): Likewise.
(expand_FALLTHROUGH_r): Likewise.
* graphite-isl-ast-to-gimple.c (gsi_insert_earliest): Adjust.
(graphite_copy_stmts_from_block): Skip nonbind markers.
* haifa-sched.c (sched_extend_bb): Skip debug insns.
* ipa-icf-gimple.c (func_checker::compare_bb): Adjust.
* jump.c (clean_barriers): Skip debug insns.
* omp-expand.c (expand_parallel_call): Skip debug insns.
(expand_task_call): Likewise.
(remove_exit_barrier): Likewise.
(expand_omp_taskreg): Likewise.
(expand_omp_for_init_counts): Likewise.
(expand_omp_for_generic): Likewise.
(expand_omp_for_static_nochunk): Likewise.
(expand_omp_for_static_chunk): Likewise.
(expand_omp_simd): Likewise.
(expand_omp_taskloop_for_outer): Likewise.
(expand_omp_taskloop_for_inner): Likewise.
(expand_oacc_for): Likewise.
(expand_omp_sections): Likewise.
(expand_omp_single): Likewise.
(expand_omp_synch): Likewise.
(expand_omp_atomic_load): Likewise.
(expand_omp_atomic_store): Likewise.
(expand_omp_atomic_fetch_op): Likewise.
(expand_omp_atomic_pipeline): Likewise.
(expand_omp_atomic_mutex): Likewise.
(expand_omp_target): Likewise.
(grid_expand_omp_for_loop): Likewise.
(grid_expand_target_grid_body): Likewise.
(build_omp_regions_1): Likewise.
* omp-low.c (check_combined_parallel): Skip debug stmts.
* postreload.c (fixup_debug_insns): Skip nonbind debug insns.
* regcprop.c (find_oldest_value_reg): Ensure REGNO is not a pseudo.
* sese.c (sese_trivially_empty_bb_p): Call is_gimple_debug in
test.
* tree-cfg.c (make_blobs_1): Skip debug stmts.
(make_edges): Likewise.
(cleanup_dead_labels): Likewise.
(gimple_can_merge_blocks_p): Likewise.
(stmt_starts_bb_p): Likewise.
(gimple_block_label): Likewise.
(gimple_redirect_edge_and_branch): Likewise.
* tree-cfgcleanup.c (remove_forwarder_block): Rearrange skipping
of debug stmts.
(execute_cleanup_cfg_post_optimizing): Dump enumerated decls with
TDF_SLIM.
* tree-pretty-print (print_declaration): Omit initializer in slim
dumps.
* tree-ssa-dce.c (mark_stmt_if_obviously_necessary): Mark begin stmt
markers.
(eliminate_unnecessary_stmts): Stabilize block removal order.
* tree-ssa-tail-merge.c (find_duplicate): Skip debug stmts.
* var-tracking.c (get_first_insn): New.
(vt_emit_notes): Call it.
(vt_initialize): Walk any insns before the first BB.
(delete_debug_insns): Likewise.
From-SVN: r255566
|
|
This patch introduces a number of new macros and functions that will
be used to distinguish between different kinds of debug stmts, insns
and notes, namely, preexisting debug bind ones and to-be-introduced
nonbind markers.
In a seemingly mechanical way, it adjusts several uses of the macros
and functions, so that they refer to narrower categories when
appropriate.
These changes, by themselves, should not have any visible effect in
the compiler behavior, since the upcoming debug markers are never
created with this patch alone.
for gcc/ChangeLog
* gimple.h (enum gimple_debug_subcode): Add
GIMPLE_DEBUG_BEGIN_STMT.
(gimple_debug_begin_stmt_p): New.
(gimple_debug_nonbind_marker_p): New.
* tree.h (MAY_HAVE_DEBUG_MARKER_STMTS): New.
(MAY_HAVE_DEBUG_BIND_STMTS): Renamed from....
(MAY_HAVE_DEBUG_STMTS): ... this. Check both.
* insn-notes.def (BEGIN_STMT): New.
* rtl.h (MAY_HAVE_DEBUG_MARKER_INSNS): New.
(MAY_HAVE_DEBUG_BIND_INSNS): Renamed from....
(MAY_HAVE_DEBUG_INSNS): ... this. Check both.
(NOTE_MARKER_LOCATION, NOTE_MARKER_P): New.
(DEBUG_BIND_INSN_P, DEBUG_MARKER_INSN_P): New.
(INSN_DEBUG_MARKER_KIND): New.
(GEN_RTX_DEBUG_MARKER_BEGIN_STMT_PAT): New.
(INSN_VAR_LOCATION): Check for VAR_LOCATION.
(INSN_VAR_LOCATION_PTR): New.
* cfgexpand.c (expand_debug_locations): Handle debug bind insns
only.
(expand_gimple_basic_block): Likewise. Emit debug temps for TER
deps only if debug bind insns are enabled.
(pass_expand::execute): Avoid deep TER and expand
debug locations for debug bind insns only.
* cgraph.c (cgraph_edge::redirect_call_stmt_to_callee): Narrow
debug stmts special handling down to debug bind stmts.
* combine.c (try_combine): Narrow debug insns special handling
down to debug bind insns.
* cse.c (delete_trivially_dead_insns): Handle debug bindings.
Narrow debug insns preexisting special handling down to debug
bind insns.
* dce.c (rest_of_handle_ud_dce): Narrow debug insns special
handling down to debug bind insns.
* function.c (instantiate_virtual_regs): Skip debug markers,
adjust handling of debug binds.
* gimple-ssa-backprop.c (backprop::prepare_change): Try debug
temp insertion iff MAY_HAVE_DEBUG_BIND_STMTS.
* haifa-sched.c (schedule_insn): Narrow special handling of debug
insns to debug bind insns.
* ipa-param-manipulation.c (ipa_modify_call_arguments): Narrow
special handling of debug stmts to debug bind stmts.
* ipa-split.c (split_function): Likewise.
* ira.c (combine_and_move_insns): Adjust debug bind insns only.
* loop-unroll.c (apply_opt_in_copies): Adjust tests on bind
debug insns.
* reg-stack.c (convert_regs_1): Use DEBUG_BIND_INSN_P.
* regrename.c (build_def_use): Likewise.
* regcprop.c (copyprop_hardreg_forward_1): Likewise.
(pass_cprop_hardreg): Narrow special casing of debug insns to
debug bind insns.
* regstat.c (regstat_init_n_sets_and_refs): Likewise.
* reload1.c (reload): Likewise.
* sese.c (sese_insert_phis_for_liveouts): Narrow special
casing of debug stmts to debug bind stmts.
* shrink-wrap.c (move_insn_for_shrink_wrap): Likewise.
* ssa-iterators.h (num_imm_uses): Likewise.
* tree-cfg.c (gimple_merge_blocks): Narrow special casing of
debug stmts to debug bind stmts.
* tree-inline.c (tree_function_versioning): Narrow special casing
of debug stmts to debug bind stmts.
* tree-loop-distribution.c (generate_loops_for_partition):
Narrow special casing of debug stmts to debug bind stmts.
* tree-sra.c (analyze_access_subtree): Narrow special casing
of debug stmts to debug bind stmts.
* tree-ssa-dce.c (remove_dead_stmt): Narrow special casing of debug
stmts to debug bind stmts.
* tree-ssa-loop-ivopt.c (remove_unused_ivs): Narrow special
casing of debug stmts to debug bind stmts.
* tree-ssa-reassoc.c (reassoc_remove_stmt): Likewise.
* tree-ssa-tail-merge.c (tail_merge_optimize): Narrow special
casing of debug stmts to debug bind stmts.
* tree-ssa-threadedge.c (propagate_threaded_block_debug_info):
Likewise.
* tree-ssa.c (flush_pending_stmts): Narrow special casing of
debug stmts to debug bind stmts.
(gimple_replace_ssa_lhs): Likewise.
(insert_debug_temp_for_var_def): Likewise.
(insert_debug_temps_for_defs): Likewise.
(reset_debug_uses): Likewise.
* tree-ssanames.c (release_ssa_name_fn): Likewise.
* tree-vect-loop-manip.c (adjust_debug_stmts_now): Likewise.
(adjust_debug_stmts): Likewise.
(adjust_phi_and_debug_stmts): Likewise.
(vect_do_peeling): Likewise.
* tree-vect-loop.c (vect_transform_loop): Likewise.
* valtrack.c (propagate_for_debug): Use BIND_DEBUG_INSN_P.
* var-tracking.c (adjust_mems): Narrow special casing of debug
insns to debug bind insns.
(dv_onepart_p, dataflow_set_clar_at_call, use_type): Likewise.
(compute_bb_dataflow, vt_find_locations): Likewise.
(vt_expand_loc, emit_notes_for_changes): Likewise.
(vt_init_cfa_base): Likewise.
(vt_emit_notes): Likewise.
(vt_initialize): Likewise.
(vt_finalize): Likewise.
From-SVN: r255565
|
|
This patch replaces the REDUC_*_EXPR tree codes with internal functions.
This is needed so that the upcoming in-order reductions can also use
internal functions without too much complication.
2017-11-22 Richard Sandiford <richard.sandiford@linaro.org>
gcc/
* tree.def (REDUC_MAX_EXPR, REDUC_MIN_EXPR, REDUC_PLUS_EXPR): Delete.
* cfgexpand.c (expand_debug_expr): Remove handling for them.
* expr.c (expand_expr_real_2): Likewise.
* fold-const.c (const_unop): Likewise.
* optabs-tree.c (optab_for_tree_code): Likewise.
* tree-cfg.c (verify_gimple_assign_unary): Likewise.
* tree-inline.c (estimate_operator_cost): Likewise.
* tree-pretty-print.c (dump_generic_node): Likewise.
(op_code_prio): Likewise.
(op_symbol_code): Likewise.
* internal-fn.def (DEF_INTERNAL_SIGNED_OPTAB_FN): Define.
(IFN_REDUC_PLUS, IFN_REDUC_MAX, IFN_REDUC_MIN): New internal functions.
* internal-fn.c (direct_internal_fn_optab): New function.
(direct_internal_fn_array, direct_internal_fn_supported_p
(internal_fn_expanders): Handle DEF_INTERNAL_SIGNED_OPTAB_FN.
* fold-const-call.c (fold_const_reduction): New function.
(fold_const_call): Handle CFN_REDUC_PLUS, CFN_REDUC_MAX and
CFN_REDUC_MIN.
* tree-vect-loop.c: Include internal-fn.h.
(reduction_code_for_scalar_code): Rename to...
(reduction_fn_for_scalar_code): ...this and return an internal
function.
(vect_model_reduction_cost): Take an internal_fn rather than
a tree_code.
(vect_create_epilog_for_reduction): Likewise. Build calls rather
than assignments.
(vectorizable_reduction): Use internal functions rather than tree
codes for the reduction operation. Update calls to the functions
above.
* config/aarch64/aarch64-builtins.c (aarch64_gimple_fold_builtin):
Use calls to internal functions rather than REDUC tree codes.
* config/aarch64/aarch64-simd.md: Update comment accordingly.
From-SVN: r255073
|
|
2017-11-21 Marc Glisse <marc.glisse@inria.fr>
gcc/c/
* c-fold.c (c_fully_fold_internal): Handle POINTER_DIFF_EXPR.
* c-typeck.c (pointer_diff): Use POINTER_DIFF_EXPR.
gcc/c-family/
* c-pretty-print.c (pp_c_additive_expression,
c_pretty_printer::expression): Handle POINTER_DIFF_EXPR.
gcc/cp/
* constexpr.c (cxx_eval_constant_expression,
potential_constant_expression_1): Handle POINTER_DIFF_EXPR.
* cp-gimplify.c (cp_fold): Likewise.
* error.c (dump_expr): Likewise.
* typeck.c (pointer_diff): Use POINTER_DIFF_EXPR.
gcc/
* doc/generic.texi: Document POINTER_DIFF_EXPR, update
POINTER_PLUS_EXPR.
* cfgexpand.c (expand_debug_expr): Handle POINTER_DIFF_EXPR.
* expr.c (expand_expr_real_2): Likewise.
* fold-const.c (const_binop, fold_addr_of_array_ref_difference,
fold_binary_loc): Likewise.
* match.pd (X-X, P+(Q-P), &D-P, (P+N)-P, P-(P+N), (P+M)-(P+N),
P-Q==0, -(A-B), X-Z<Y-Z, (X-Z)-(Y-Z), Z-X<Z-Y, (Z-X)-(Z-Y),
(A-B)+(C-A)): New transformations for POINTER_DIFF_EXPR, based on
MINUS_EXPR transformations.
* optabs-tree.c (optab_for_tree_code): Handle POINTER_DIFF_EXPR.
* tree-cfg.c (verify_expr, verify_gimple_assign_binary): Likewise.
* tree-inline.c (estimate_operator_cost): Likewise.
* tree-pretty-print.c (dump_generic_node, op_code_prio,
op_symbol_code): Likewise.
* tree-vect-stmts.c (vectorizable_operation): Likewise.
* vr-values.c (extract_range_from_binary_expr): Likewise.
* varasm.c (initializer_constant_valid_p_1): Likewise.
* tree.def: New tree code POINTER_DIFF_EXPR.
From-SVN: r255021
|
|
* asan.c (create_cond_insert_point): Maintain profile.
* ipa-utils.c (ipa_merge_profiles): Be sure only IPA profiles are
merged.
* basic-block.h (struct basic_block_def): Remove frequency.
(EDGE_FREQUENCY): Use to_frequency
* bb-reorder.c (push_to_next_round_p): Use only IPA counts for global
heuristics.
(find_traces): Update to use to_frequency.
(find_traces_1_round): Likewise; use only IPA counts.
(bb_to_key): Likewise.
(connect_traces): Use IPA counts only.
(copy_bb_p): Update to use to_frequency.
(fix_up_crossing_landing_pad): Likewise.
(sanitize_hot_paths): Likewise.
* bt-load.c (basic_block_freq): Likewise.
* cfg.c (init_flow): Set count_max to uninitialized.
(check_bb_profile): Remove frequencies; check counts.
(dump_bb_info): Do not dump frequencies.
(update_bb_profile_for_threading): Update counts only.
(scale_bbs_frequencies_int): Likewise.
(MAX_SAFE_MULTIPLIER): Remove.
(scale_bbs_frequencies_gcov_type): Update counts only.
(scale_bbs_frequencies_profile_count): Update counts only.
(scale_bbs_frequencies): Update counts only.
* cfg.h (struct control_flow_graph): Add count-max.
(update_bb_profile_for_threading): Update prototype.
* cfgbuild.c (find_bb_boundaries): Do not update frequencies.
(find_many_sub_basic_blocks): Likewise.
* cfgcleanup.c (try_forward_edges): Likewise.
(try_crossjump_to_edge): Likewise.
* cfgexpand.c (expand_gimple_cond): Likewise.
(expand_gimple_tailcall): Likewise.
(construct_init_block): Likewise.
(construct_exit_block): Likewise.
* cfghooks.c (verify_flow_info): Check consistency of counts.
(dump_bb_for_graph): Do not dump frequencies.
(split_block_1): Do not update frequencies.
(split_edge): Do not update frequencies.
(make_forwarder_block): Do not update frequencies.
(duplicate_block): Do not update frequencies.
(account_profile_record): Do not update frequencies.
* cfgloop.c (find_subloop_latch_edge_by_profile): Use IPA counts
for global heuristics.
* cfgloopanal.c (average_num_loop_insns): Update to use to_frequency.
(expected_loop_iterations_unbounded): Use counts only.
* cfgloopmanip.c (scale_loop_profile): Simplify.
(create_empty_loop_on_edge): Simplify
(loopify): Simplify
(duplicate_loop_to_header_edge): Simplify
* cfgrtl.c (force_nonfallthru_and_redirect): Update profile.
(update_br_prob_note): Take care of removing note when profile
becomes undefined.
(relink_block_chain): Do not dump frequency.
(rtl_account_profile_record): Use to_frequency.
* cgraph.c (symbol_table::create_edge): Convert count to ipa count.
(cgraph_edge::redirect_call_stmt_to_calle): Conver tcount to ipa count.
(cgraph_update_edges_for_call_stmt_node): Likewise.
(cgraph_edge::verify_count_and_frequency): Update.
(cgraph_node::verify_node): Temporarily disable frequency verification.
* cgraphbuild.c (compute_call_stmt_bb_frequency): Use
to_cgraph_frequency.
(cgraph_edge::rebuild_edges): Convert to ipa counts.
* cgraphunit.c (init_lowered_empty_function): Do not initialize
frequencies.
(cgraph_node::expand_thunk): Update profile.
* except.c (dw2_build_landing_pads): Do not update frequency.
* final.c (compute_alignments): Use to_frequency.
(dump_basic_block_info): Do not dump frequency.
* gimple-pretty-print.c (dump_profile): Do not dump frequency.
(dump_gimple_bb_header): Do not dump frequency.
* gimple-ssa-isolate-paths.c (isolate_path): Do not update frequency;
do update count.
* gimple-streamer-in.c (input_bb): Do not stream frequency.
* gimple-streamer-out.c (output_bb): Do not stream frequency.
* haifa-sched.c (sched_pressure_start_bb): Use to_freuqency.
(init_before_recovery): Do not update frequency.
(sched_create_recovery_edges): Do not update frequency.
* hsa-gen.c (convert_switch_statements): Do not update frequency.
* ipa-cp.c (ipcp_propagate_stage): Update search for max_count.
(ipa_cp_c_finalize): Set max_count to uninitialized.
* ipa-fnsummary.c (get_minimal_bb): Use counts.
(param_change_prob): Use counts.
* ipa-profile.c (ipa_profile_generate_summary): Do not summarize
local profiles.
* ipa-split.c (consider_split): Use to_frequency.
(split_function): Use to_frequency.
* ira-build.c (loop_compare_func): Likewise.
(mark_loops_for_removal): Likewise.
(mark_all_loops_for_removal): Likewise.
* loop-doloop.c (doloop_modify): Do not update frequency.
* loop-unroll.c (unroll_loop_runtime_iterations): Do not update
frequency.
* lto-streamer-in.c (input_function): Update count_max.
* omp-expand.c (expand_omp_taskreg): Update count_max.
* omp-simd-clone.c (simd_clone_adjust): Update profile.
* predict.c (maybe_hot_frequency_p): Use to_frequency.
(maybe_hot_count_p): Use ipa counts only.
(maybe_hot_bb_p): Simplify.
(maybe_hot_edge_p): Simplify.
(probably_never_executed): Do not take frequency argument.
(probably_never_executed_bb_p): Do not pass frequency.
(probably_never_executed_edge_p): Likewise.
(combine_predictions_for_bb): Check that profile is nonzero.
(propagate_freq): Do not set frequency.
(drop_profile): Simplify.
(counts_to_freqs): Simplify.
(expensive_function_p): Use to_frequency.
(propagate_unlikely_bbs_forward): Simplify.
(determine_unlikely_bbs): Simplify.
(estimate_bb_frequencies): Add hack to silence graphite issues.
(compute_function_frequency): Use ipa counts.
(pass_profile::execute): Update.
(rebuild_frequencies): Use counts only.
(force_edge_cold): Use counts only.
* profile-count.c (profile_count::dump): Dump new count types.
(profile_count::differs_from_p): Check compatiblity.
(profile_count::to_frequency): New function.
(profile_count::to_cgraph_frequency): New function.
* profile-count.h (struct function): Declare.
(enum profile_quality): Add profile_guessed_local and
profile_guessed_global0.
(class profile_proability): Decrease number of bits to 29;
update from_reg_br_prob_note and to_reg_br_prob_note.
(class profile_count: Update comment; decrease number of bits
to 61. Check compatibility.
(profile_count::compatible_p): New private member function.
(profile_count::ipa_p): New member function.
(profile_count::operator<): Handle global zero correctly.
(profile_count::operator>): Handle global zero correctly.
(profile_count::operator<=): Handle global zero correctly.
(profile_count::operator>=): Handle global zero correctly.
(profile_count::nonzero_p): New member function.
(profile_count::force_nonzero): New member function.
(profile_count::max): New member function.
(profile_count::apply_scale): Handle IPA scalling.
(profile_count::guessed_local): New member function.
(profile_count::global0): New member function.
(profile_count::ipa): New member function.
(profile_count::to_frequency): Declare.
(profile_count::to_cgraph_frequency): Declare.
* profile.c (OVERLAP_BASE): Delete.
(compute_frequency_overlap): Delete.
(compute_branch_probabilities): Do not use compute_frequency_overlap.
* regs.h (REG_FREQ_FROM_BB): Use to_frequency.
* sched-ebb.c (rank): Use counts only.
* shrink-wrap.c (handle_simple_exit): Use counts only.
(try_shrink_wrapping): Use counts only.
(place_prologue_for_one_component): Use counts only.
* tracer.c (find_best_predecessor): Use to_frequency.
(find_trace): Use to_frequency.
(tail_duplicate): Use to_frequency.
* trans-mem.c (expand_transaction): Do not update frequency.
* tree-call-cdce.c: Do not update frequency.
* tree-cfg.c (gimple_find_sub_bbs): Likewise.
(gimple_merge_blocks): Likewise.
(gimple_split_edge): Likewise.
(gimple_duplicate_sese_region): Likewise.
(gimple_duplicate_sese_tail): Likewise.
(move_sese_region_to_fn): Likewise.
(gimple_account_profile_record): Likewise.
(insert_cond_bb): Likewise.
* tree-complex.c (expand_complex_div_wide): Likewise.
* tree-eh.c (lower_resx): Update profile.
* tree-inline.c (copy_bb): Simplify count scaling; do not scale
frequencies.
(initialize_cfun): Do not initialize frequencies
(freqs_to_counts): Delete.
(copy_cfg_body): Ignore count parameter.
(copy_body): Update.
(expand_call_inline): Update count_max.
(optimize_inline_calls): Update count_max.
(tree_function_versioning): Update count_max.
* tree-ssa-coalesce.c (coalesce_cost_bb): Use to_frequency.
* tree-ssa-ifcombine.c (update_profile_after_ifcombine): Do not update
frequency.
* tree-ssa-loop-im.c (execute_sm_if_changed): Use counts only.
* tree-ssa-loop-ivcanon.c (unloop_loops): Do not update freuqency.
(try_peel_loop): Likewise.
* tree-ssa-loop-ivopts.c (get_scaled_computation_cost_at): Use
to_frequency.
* tree-ssa-loop-manip.c (niter_for_unrolled_loop): Pass -1.
(tree_transform_and_unroll_loop): Do not use frequencies
* tree-ssa-loop-niter.c (estimate_numbers_of_iterations):
Use reliable prediction only.
* tree-ssa-loop-unswitch.c (hoist_guard): Do not use frequencies.
* tree-ssa-sink.c (select_best_block): Use to_frequency.
* tree-ssa-tail-merge.c (replace_block_by): Temporarily disable
probability scaling.
* tree-ssa-threadupdate.c (create_block_for_threading): Do
not update frequency
(any_remaining_duplicated_blocks): Likewise.
(update_profile): Likewise.
(estimated_freqs_path): Delete.
(freqs_to_counts_path): Delete.
(clear_counts_path): Delete.
(ssa_fix_duplicate_block_edges): Likewise.
(duplicate_thread_path): Likewise.
* tree-switch-conversion.c (gen_inbound_check): Use counts.
* tree-tailcall.c (decrease_profile): Do not update frequency.
(eliminate_tail_call): Likewise.
* tree-vect-loop-manip.c (vect_do_peeling): Likewise.
* tree-vect-loop.c (scale_profile_for_vect_loop): Likewise.
(optimize_mask_stores): Likewise.
* tree-vect-stmts.c (vectorizable_simd_clone_call): Likewise.
* ubsan.c (ubsan_expand_null_ifn): Update profile.
(ubsan_expand_ptr_ifn): Update profile.
* value-prof.c (gimple_ic): Simplify.
* value-prof.h (gimple_ic): Update prototype.
* ipa-inline-transform.c (inline_transform): Fix scaling conditoins.
* ipa-inline.c (compute_uninlined_call_time): Be sure that
counts are nonzero.
(want_inline_self_recursive_call_p): Likewise.
(resolve_noninline_speculation): Only cummulate defined counts.
(inline_small_functions): Use nonzero_p.
(ipa_inline): Do not access freed node.
Unknown ChangeLog:
2017-11-02 Jan Hubicka <hubicka@ucw.cz>
* testsuite/gcc.dg/no-strict-overflow-3.c (foo): Update magic
value to not clash with frequency.
* testsuite/gcc.dg/strict-overflow-3.c (foo): Likewise.
* testsuite/gcc.dg/tree-ssa/builtin-sprintf-2.c: Update template.
* testsuite/gcc.dg/tree-ssa/dump-2.c: Update template.
* testsuite/gcc.dg/tree-ssa/ifc-10.c: Update template.
* testsuite/gcc.dg/tree-ssa/ifc-11.c: Update template.
* testsuite/gcc.dg/tree-ssa/ifc-12.c: Update template.
* testsuite/gcc.dg/tree-ssa/ifc-20040816-1.c: Update template.
* testsuite/gcc.dg/tree-ssa/ifc-20040816-2.c: Update template.
* testsuite/gcc.dg/tree-ssa/ifc-5.c: Update template.
* testsuite/gcc.dg/tree-ssa/ifc-8.c: Update template.
* testsuite/gcc.dg/tree-ssa/ifc-9.c: Update template.
* testsuite/gcc.dg/tree-ssa/ifc-cd.c: Update template.
* testsuite/gcc.dg/tree-ssa/ifc-pr56541.c: Update template.
* testsuite/gcc.dg/tree-ssa/ifc-pr68583.c: Update template.
* testsuite/gcc.dg/tree-ssa/ifc-pr69489-1.c: Update template.
* testsuite/gcc.dg/tree-ssa/ifc-pr69489-2.c: Update template.
* testsuite/gcc.target/i386/pr61403.c: Update template.
From-SVN: r254379
|
|
PR middle-end/82569
* tree-outof-ssa.h (always_initialized_rtx_for_ssa_name_p): Delete.
* expr.c (expand_expr_real_1) <expand_decl_rtl>: Revert latest change.
* loop-iv.c (iv_get_reaching_def): Likewise.
* cfgexpand.c (expand_one_ssa_partition): Initialize the RTX if the
variable is promoted and the partition contains undefined values.
From-SVN: r254037
|
|
I took the documentation of the FRAME_GROWS_DOWNWARD behaviour from the
version that was in most header files, since the one in the manual seemed
less clear.
The patch deliberately keeps FIRST_PARM_OFFSET(FNDECL) in
microblaze_starting_frame_offset; this seems to be a port-local
convention and takes advantage of the fact that FIRST_PARM_OFFSET
doesn't read FNDECL.
2017-10-23 Richard Sandiford <richard.sandiford@linaro.org>
gcc/
* target.def (starting_frame_offset): New hook.
* doc/tm.texi (STARTING_FRAME_OFFSET): Remove in favor of...
(TARGET_STARTING_FRAME_OFFSET): ...this new hook.
* doc/tm.texi.in: Regenerate.
* hooks.h (hook_hwi_void_0): Declare.
* hooks.c (hook_hwi_void_0): New function.
* doc/rtl.texi: Refer to TARGET_STARTING_FRAME_OFFSET instead of
STARTING_FRAME_OFFSET.
* builtins.c (expand_builtin_setjmp_receiver): Likewise.
* reload1.c (reload): Likewise.
* cfgexpand.c (expand_used_vars): Use targetm.starting_frame_offset
instead of STARTING_FRAME_OFFSET.
* function.c (try_fit_stack_local): Likewise.
(assign_stack_local_1): Likewise
(instantiate_virtual_regs): Likewise.
* rtlanal.c (rtx_addr_can_trap_p_1): Likewise.
* config/avr/avr.md (nonlocal_goto_receiver): Likewise.
* config/aarch64/aarch64.h (STARTING_FRAME_OFFSET): Delete.
* config/alpha/alpha.h (STARTING_FRAME_OFFSET): Likewise.
* config/arc/arc.h (STARTING_FRAME_OFFSET): Likewise.
* config/arm/arm.h (STARTING_FRAME_OFFSET): Likewise.
* config/bfin/bfin.h (STARTING_FRAME_OFFSET): Likewise.
* config/c6x/c6x.h (STARTING_FRAME_OFFSET): Likewise.
* config/cr16/cr16.h (STARTING_FRAME_OFFSET): Likewise.
* config/cris/cris.h (STARTING_FRAME_OFFSET): Likewise.
* config/fr30/fr30.h (STARTING_FRAME_OFFSET): Likewise.
* config/frv/frv.h (STARTING_FRAME_OFFSET): Likewise.
* config/ft32/ft32.h (STARTING_FRAME_OFFSET): Likewise.
* config/h8300/h8300.h (STARTING_FRAME_OFFSET): Likewise.
* config/i386/i386.h (STARTING_FRAME_OFFSET): Likewise.
* config/ia64/ia64.h (STARTING_FRAME_OFFSET): Likewise.
* config/m32c/m32c.h (STARTING_FRAME_OFFSET): Likewise.
* config/m68k/m68k.h (STARTING_FRAME_OFFSET): Likewise.
* config/mcore/mcore.h (STARTING_FRAME_OFFSET): Likewise.
* config/mn10300/mn10300.h (STARTING_FRAME_OFFSET): Likewise.
* config/moxie/moxie.h (STARTING_FRAME_OFFSET): Likewise.
* config/msp430/msp430.h (STARTING_FRAME_OFFSET): Likewise.
* config/nds32/nds32.h (STARTING_FRAME_OFFSET): Likewise.
* config/nios2/nios2.h (STARTING_FRAME_OFFSET): Likewise.
* config/nvptx/nvptx.h (STARTING_FRAME_OFFSET): Likewise.
* config/pdp11/pdp11.h (STARTING_FRAME_OFFSET): Likewise.
* config/riscv/riscv.h (STARTING_FRAME_OFFSET): Likewise.
* config/rl78/rl78.h (STARTING_FRAME_OFFSET): Likewise.
* config/rx/rx.h (STARTING_FRAME_OFFSET): Likewise.
* config/s390/s390.h (STARTING_FRAME_OFFSET): Likewise.
* config/sh/sh.h (STARTING_FRAME_OFFSET): Likewise.
* config/sparc/sparc.c (sparc_compute_frame_size): Likewise.
* config/sparc/sparc.h (STARTING_FRAME_OFFSET): Likewise.
* config/spu/spu.h (STARTING_FRAME_OFFSET): Likewise.
* config/stormy16/stormy16.h (STARTING_FRAME_OFFSET): Likewise.
* config/tilegx/tilegx.h (STARTING_FRAME_OFFSET): Likewise.
* config/tilepro/tilepro.h (STARTING_FRAME_OFFSET): Likewise.
* config/v850/v850.h (STARTING_FRAME_OFFSET): Likewise.
* config/visium/visium.h (STARTING_FRAME_OFFSET): Likewise.
* config/avr/avr.h (STARTING_FRAME_OFFSET): Likewise.
* config/avr/avr-protos.h (avr_starting_frame_offset): Likewise.
* config/avr/avr.c (avr_starting_frame_offset): Make static and
return a HOST_WIDE_INT.
(avr_builtin_setjmp_frame_value): Use it instead of
STARTING_FRAME_OFFSET.
(TARGET_STARTING_FRAME_OFFSET): Redefine.
* config/epiphany/epiphany.h (STARTING_FRAME_OFFSET): Delete.
* config/epiphany/epiphany.c (epiphany_starting_frame_offset):
New function.
(TARGET_STARTING_FRAME_OFFSET): Redefine.
* config/iq2000/iq2000.h (STARTING_FRAME_OFFSET): Delete.
* config/iq2000/iq2000.c (iq2000_starting_frame_offset): New function.
(TARGET_CONSTANT_ALIGNMENT): Redefine.
* config/lm32/lm32.h (STARTING_FRAME_OFFSET): Delete.
* config/lm32/lm32.c (lm32_starting_frame_offset): New function.
(TARGET_STARTING_FRAME_OFFSET): Redefine.
* config/m32r/m32r.h (STARTING_FRAME_OFFSET): Delete.
* config/m32r/m32r.c (m32r_starting_frame_offset): New function.
(TARGET_STARTING_FRAME_OFFSET): Redefine.
* config/microblaze/microblaze.h (STARTING_FRAME_OFFSET): Delete.
* config/microblaze/microblaze.c (microblaze_starting_frame_offset):
New function.
(TARGET_STARTING_FRAME_OFFSET): Redefine.
* config/mips/mips.h (STARTING_FRAME_OFFSET): Delete.
* config/mips/mips.c (mips_compute_frame_info): Refer to
TARGET_STARTING_FRAME_OFFSET instead of STARTING_FRAME_OFFSET.
(mips_starting_frame_offset): New function.
(TARGET_STARTING_FRAME_OFFSET): Redefine.
* config/mmix/mmix.h (STARTING_FRAME_OFFSET): Delete.
* config/mmix/mmix-protos.h (mmix_starting_frame_offset): Delete.
* config/mmix/mmix.c (mmix_starting_frame_offset): Make static
and return a HOST_WIDE_INT.
(TARGET_STARTING_FRAME_OFFSET): Redefine.
(mmix_initial_elimination_offset): Refer to
TARGET_STARTING_FRAME_OFFSET instead of STARTING_FRAME_OFFSET.
* config/pa/pa.h (STARTING_FRAME_OFFSET): Delete.
* config/pa/pa.c (pa_starting_frame_offset): New function.
(pa_compute_frame_size): Use it instead of STARTING_FRAME_OFFSET.
(pa_expand_prologue): Likewise.
(TARGET_STARTING_FRAME_OFFSET): Redefine.
* config/powerpcspe/aix.h (STARTING_FRAME_OFFSET): Split out
!FRAME_GROWS_DOWNWARD handling to...
(RS6000_STARTING_FRAME_OFFSET): ...this new macro.
* config/powerpcspe/darwin.h (STARTING_FRAME_OFFSET): Split out
!FRAME_GROWS_DOWNWARD handling to...
(RS6000_STARTING_FRAME_OFFSET): ...this new macro.
* config/powerpcspe/powerpcspe.h (STARTING_FRAME_OFFSET): Split out
!FRAME_GROWS_DOWNWARD handling to...
(RS6000_STARTING_FRAME_OFFSET): ...this new macro.
* config/powerpcspe/powerpcspe.c (TARGET_STARTING_FRAME_OFFSET):
Redefine.
(rs6000_starting_frame_offset): New function.
* config/rs6000/aix.h (STARTING_FRAME_OFFSET): Split out
!FRAME_GROWS_DOWNWARD handling to...
(RS6000_STARTING_FRAME_OFFSET): ...this new macro.
* config/rs6000/darwin.h (STARTING_FRAME_OFFSET): Split out
!FRAME_GROWS_DOWNWARD handling to...
(RS6000_STARTING_FRAME_OFFSET): ...this new macro.
* config/rs6000/rs6000.h (STARTING_FRAME_OFFSET): Split out
!FRAME_GROWS_DOWNWARD handling to...
(RS6000_STARTING_FRAME_OFFSET): ...this new macro.
* config/rs6000/rs6000.c (TARGET_STARTING_FRAME_OFFSET): Refine.
(rs6000_starting_frame_offset): New function.
* config/vax/elf.h (STARTING_FRAME_OFFSET): Delete.
* config/vax/vax.h (STARTING_FRAME_OFFSET): Delete.
* config/vax/vax.c (vax_starting_frame_offset): New function.
(vax_expand_prologue): Use it instead of STARTING_FRAME_OFFSET.
(TARGET_STARTING_FRAME_OFFSET): Redefine.
* config/xtensa/xtensa.h (STARTING_FRAME_OFFSET): Delete.
* config/xtensa/xtensa.c (xtensa_starting_frame_offset): New function.
(TARGET_STARTING_FRAME_OFFSET): Redefine.
* system.h (STARTING_FRAME_OFFSET): Poison.
From-SVN: r254003
|
|
This patch is like the earlier GET_MODE_UNIT_SIZE one,
but for precisions rather than sizes. There is one behavioural
change in expand_debug_expr: we shouldn't use lowpart subregs
for non-scalar truncations, since that would just reinterpret
some of the scalars and drop the rest. (This probably doesn't
trigger in practice.) Using TRUNCATE is fine for scalars,
since simplify_gen_unary knows when a subreg can be used.
2017-10-22 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* cfgexpand.c (expand_debug_expr): Use GET_MODE_UNIT_PRECISION.
(expand_debug_source_expr): Likewise.
* combine.c (combine_simplify_rtx): Likewise.
* cse.c (fold_rtx): Likewise.
* optabs.c (expand_float): Likewise.
* simplify-rtx.c (simplify_unary_operation_1): Likewise.
(simplify_binary_operation_1): Likewise.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r253991
|
|
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
A proposal is to introduce a target independent flag
-fcf-protection=[none|branch|return|full] with a semantic to
instrument a code to control validness or integrity of control-flow
transfers using jump and call instructions. The main goal is to detect
and block a possible malware execution through transfer the execution
to unknown target address. Implementation could be either software or
target based. Any target platforms can provide their implementation
for instrumentation under this option.
The compiler should instrument any control-flow transfer points in a
program (ex. call/jmp/ret) as well as any landing pads, which are
targets of control-flow transfers.
A new 'nocf_check' attribute is introduced to provide hand tuning
support. The attribute directs the compiler to skip a call to a
function and a function's landing pad from instrumentation. The
attribute can be used for function and pointer to function types,
otherwise it will be ignored.
Currently all platforms except i386 will report the error and do no
instrumentation. i386 will provide the implementation based on a
specification published by Intel for a new technology called
Control-flow Enforcement Technology (CET).
gcc/c-family/
* c-attribs.c (handle_nocf_check_attribute): New function.
(c_common_attribute_table): Add 'nocf_check' handling.
gcc/c/
* gimple-parser.c: Add second argument NULL to
gimple_build_call_from_tree.
gcc/
* attrib.c (comp_type_attributes): Check nocf_check attribute.
* cfgexpand.c (expand_call_stmt): Set REG_CALL_NOCF_CHECK for
call insn.
* combine.c (distribute_notes): Add REG_CALL_NOCF_CHECK handling.
* common.opt: Add fcf-protection flag.
* emit-rtl.c (try_split): Add REG_CALL_NOCF_CHECK handling.
* flag-types.h: Add enum cf_protection_level.
* gimple.c (gimple_build_call_from_tree): Add second parameter.
Add 'nocf_check' attribute propagation to gimple call.
* gimple.h (gf_mask): Add GF_CALL_NOCF_CHECK.
(gimple_build_call_from_tree): Update prototype.
(gimple_call_nocf_check_p): New function.
(gimple_call_set_nocf_check): Likewise.
* gimplify.c: Add second argument to gimple_build_call_from_tree.
* ipa-icf.c: Add nocf_check attribute in statement hash.
* recog.c (peep2_attempt): Add REG_CALL_NOCF_CHECK handling.
* reg-notes.def: Add REG_NOTE (CALL_NOCF_CHECK).
* toplev.c (process_options): Add flag_cf_protection handling.
From-SVN: r253936
|
|
* asan.c (create_cond_insert_point): Do not update edge count.
* auto-profile.c (afdo_propagate_edge): Update for edge count removal.
(afdo_propagate_circuit): Likewise.
(afdo_calculate_branch_prob): Likewise.
(afdo_annotate_cfg): Likewise.
* basic-block.h (struct edge_def): Remove count.
(edge_def::count): New accessor.
* bb-reorder.c (rotate_loop): Update.
(find_traces_1_round): Update.
(connect_traces): Update.
(sanitize_hot_paths): Update.
* cfg.c (unchecked_make_edge): Update.
(make_single_succ_edge): Update.
(check_bb_profile): Update.
(dump_edge_info): Update.
(update_bb_profile_for_threading): Update.
(scale_bbs_frequencies_int): Update.
(scale_bbs_frequencies_gcov_type): Update.
(scale_bbs_frequencies_profile_count): Update.
(scale_bbs_frequencies): Update.
* cfganal.c (connect_infinite_loops_to_exit): Update.
* cfgbuild.c (compute_outgoing_frequencies): Update.
(find_many_sub_basic_blocks): Update.
* cfgcleanup.c (try_forward_edges): Update.
(try_crossjump_to_edge): Update
* cfgexpand.c (expand_gimple_cond): Update
(expand_gimple_tailcall): Update
(construct_exit_block): Update
* cfghooks.c (verify_flow_info): Update
(redirect_edge_succ_nodup): Update
(split_edge): Update
(make_forwarder_block): Update
(duplicate_block): Update
(account_profile_record): Update
* cfgloop.c (find_subloop_latch_edge_by_profile): Update.
* cfgloopanal.c (expected_loop_iterations_unbounded): Update.
* cfgloopmanip.c (scale_loop_profile): Update.
(loopify): Update.
(lv_adjust_loop_entry_edge): Update.
* cfgrtl.c (try_redirect_by_replacing_jump): Update.
(force_nonfallthru_and_redirect): Update.
(purge_dead_edges): Update.
(rtl_flow_call_edges_add): Update.
* cgraphunit.c (init_lowered_empty_function): Update.
(cgraph_node::expand_thunk): Update.
* gimple-pretty-print.c (dump_probability): Update.
(dump_edge_probability): Update.
* gimple-ssa-isolate-paths.c (isolate_path): Update.
* haifa-sched.c (sched_create_recovery_edges): Update.
* hsa-gen.c (convert_switch_statements): Update.
* ifcvt.c (dead_or_predicable): Update.
* ipa-inline-transform.c (inline_transform): Update.
* ipa-split.c (split_function): Update.
* ipa-utils.c (ipa_merge_profiles): Update.
* loop-doloop.c (add_test): Update.
* loop-unroll.c (unroll_loop_runtime_iterations): Update.
* lto-streamer-in.c (input_cfg): Update.
(input_function): Update.
* lto-streamer-out.c (output_cfg): Update.
* modulo-sched.c (sms_schedule): Update.
* postreload-gcse.c (eliminate_partially_redundant_load): Update.
* predict.c (maybe_hot_edge_p): Update.
(unlikely_executed_edge_p): Update.
(probably_never_executed_edge_p): Update.
(dump_prediction): Update.
(drop_profile): Update.
(propagate_unlikely_bbs_forward): Update.
(determine_unlikely_bbs): Update.
(force_edge_cold): Update.
* profile.c (compute_branch_probabilities): Update.
* reg-stack.c (better_edge): Update.
* shrink-wrap.c (handle_simple_exit): Update.
* tracer.c (better_p): Update.
* trans-mem.c (expand_transaction): Update.
(split_bb_make_tm_edge): Update.
* tree-call-cdce.c: Update.
* tree-cfg.c (gimple_find_sub_bbs): Update.
(gimple_split_edge): Update.
(gimple_duplicate_sese_region): Update.
(gimple_duplicate_sese_tail): Update.
(gimple_flow_call_edges_add): Update.
(insert_cond_bb): Update.
(execute_fixup_cfg): Update.
* tree-cfgcleanup.c (cleanup_control_expr_graph): Update.
* tree-complex.c (expand_complex_div_wide): Update.
* tree-eh.c (lower_resx): Update.
(unsplit_eh): Update.
(cleanup_empty_eh_move_lp): Update.
* tree-inline.c (copy_edges_for_bb): Update.
(freqs_to_counts): Update.
(copy_cfg_body): Update.
* tree-ssa-dce.c (remove_dead_stmt): Update.
* tree-ssa-ifcombine.c (update_profile_after_ifcombine): Update.
* tree-ssa-loop-im.c (execute_sm_if_changed): Update.
* tree-ssa-loop-ivcanon.c (remove_exits_and_undefined_stmts): Update.
(unloop_loops): Update.
* tree-ssa-loop-manip.c (tree_transform_and_unroll_loop): Update.
* tree-ssa-loop-split.c (connect_loops): Update.
(split_loop): Update.
* tree-ssa-loop-unswitch.c (hoist_guard): Update.
* tree-ssa-phionlycprop.c (propagate_rhs_into_lhs): Update.
* tree-ssa-phiopt.c (replace_phi_edge_with_variable): Update.
* tree-ssa-reassoc.c (branch_fixup): Update.
* tree-ssa-tail-merge.c (replace_block_by): Update.
* tree-ssa-threadupdate.c (remove_ctrl_stmt_and_useless_edges): Update.
(compute_path_counts): Update.
(update_profile): Update.
(recompute_probabilities): Update.
(update_joiner_offpath_counts): Update.
(estimated_freqs_path): Update.
(freqs_to_counts_path): Update.
(clear_counts_path): Update.
(ssa_fix_duplicate_block_edges): Update.
(duplicate_thread_path): Update.
* tree-switch-conversion.c (hoist_edge_and_branch_if_true): Update.
(case_bit_test_cmp): Update.
(collect_switch_conv_info): Update.
(gen_inbound_check): Update.
(do_jump_if_equal): Update.
(emit_cmp_and_jump_insns): Update.
* tree-tailcall.c (decrease_profile): Update.
(eliminate_tail_call): Update.
* tree-vect-loop-manip.c (slpeel_add_loop_guard): Update.
(vect_do_peeling): Update.
* tree-vect-loop.c (scale_profile_for_vect_loop): Update.
* ubsan.c (ubsan_expand_null_ifn): Update.
(ubsan_expand_ptr_ifn): Update.
* value-prof.c (gimple_divmod_fixed_value): Update.
(gimple_mod_pow2): Update.
(gimple_mod_subtract): Update.
(gimple_ic): Update.
(gimple_stringop_fixed_value): Update.
From-SVN: r253910
|
|
* asan.c (handle_builtin_alloca): Deal with all alloca variants.
(get_mem_refs_of_builtin_call): Likewise.
* builtins.c (expand_builtin_apply): Adjust call to
allocate_dynamic_stack_space.
(expand_builtin_alloca): For __builtin_alloca_with_align_and_max, pass
the third argument to allocate_dynamic_stack_space, otherwise -1.
(expand_builtin): Deal with all alloca variants.
(is_inexpensive_builtin): Likewise.
* builtins.def (BUILT_IN_ALLOCA_WITH_ALIGN_AND_MAX): New.
* calls.c (special_function_p): Deal with all alloca variants.
(initialize_argument_information): Adjust call to
allocate_dynamic_stack_space.
(expand_call): Likewise.
* cfgexpand.c (expand_call_stmt): Deal with all alloca variants.
* doc/extend.texi (Built-ins): Add __builtin_alloca_with_align_and_max
* explow.c (allocate_dynamic_stack_space): Add MAX_SIZE parameter and
use it for the stack usage computation.
* explow.h (allocate_dynamic_stack_space): Adjust prototype.
* function.c (gimplify_parameters): Turn BUILT_IN_ALLOCA_WITH_ALIGN
into BUILT_IN_ALLOCA_WITH_ALIGN_AND_MAX and pass maximum size.
* gimple-ssa-warn-alloca.c (alloca_call_type): Simplify control flow.
Take into account 3rd argument of __builtin_alloca_with_align_and_max.
(in_loop_p): Remove first argument and useless check.
(pass_walloca::execute): Remove useless test and adjust call to above.
* gimple.c (gimple_build_call_from_tree): Deal with all alloc variants
* gimplify.c (gimplify_vla_decl): Turn BUILT_IN_ALLOCA_WITH_ALIGN into
BUILT_IN_ALLOCA_WITH_ALIGN_AND_MAX and pass maximum size.
(gimplify_call_expr): Deal with all alloca variants.
* hsa-gen.c (gen_hsa_alloca): Likewise.
(gen_hsa_insns_for_call): Likewise.
* ipa-pure-const.c (special_builtin_state): Likewise.
* tree-chkp.c (chkp_build_returned_bound): Likewise.
* tree-object-size.c (alloc_object_size): Likewise.
* tree-ssa-alias.c (ref_maybe_used_by_call_p_1): Likewise.
(call_may_clobber_ref_p_1): Likewise.
* tree-ssa-ccp.c (evaluate_stmt): Likewise.
(ccp_fold_stmt): Likewise.
(optimize_stack_restore): Likewise.
* tree-ssa-dce.c (mark_stmt_if_obviously_necessary): Likewise.
(mark_all_reaching_defs_necessary_1): Likewise.
(propagate_necessity): Likewise.
(eliminate_unnecessary_stmts): Likewise.
* tree.c (build_common_builtin_nodes): Build
BUILT_IN_ALLOCA_WITH_ALIGN_AND_MAX.
* tree.h (ALLOCA_FUNCTION_CODE_P): New macro.
(CASE_BUILT_IN_ALLOCA): Likewise.
* varasm.c (incorporeal_function_p): Deal with all alloca variants.
c-family/
* c-common.c (check_builtin_function_arguments): Also check arguments
of __builtin_alloca_with_align_and_max.
From-SVN: r253901
|
|
This patch is like the previous GET_MODE_UNIT_SIZE one,
but for bit rather than byte sizes.
2017-10-13 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* cfgexpand.c (expand_debug_expr): Use GET_MODE_UNIT_BITSIZE.
(expand_debug_source_expr): Likewise.
* combine.c (combine_simplify_rtx): Likewise.
* cse.c (fold_rtx): Likewise.
* fwprop.c (canonicalize_address): Likewise.
* targhooks.c (default_shift_truncation_mask): Likewise.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r253716
|
|
Previously VECTOR_CST_NELTS (t) read the number of elements from
TYPE_VECTOR_SUBPARTS (TREE_TYPE (t)). There were two ways of handling
this with variable TYPE_VECTOR_SUBPARTS: either forcibly convert the
number to a constant (which is doable) or store the number directly
in the VECTOR_CST. The latter seemed better, since it involves less
pointer chasing and since the tree_node u field is otherwise unused
for VECTOR_CST. It would still be easy to switch to the former in
future if we need to free up the field for someting else.
The patch also changes various bits of VECTOR_CST code to use
VECTOR_CST_NELTS instead of TYPE_VECTOR_SUBPARTS when iterating
over VECTOR_CST_ELTs. Also, when the two are checked for equality,
the patch prefers to read VECTOR_CST_NELTS (which must be constant)
and check against TYPE_VECTOR_SUBPARTS, instead of the other way
around.
2017-09-14 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* tree-core.h (tree_base::u): Add an "nelts" field.
(tree_vector): Use VECTOR_CST_NELTS as the length.
* tree.c (tree_size): Likewise.
(make_vector): Initialize VECTOR_CST_NELTS.
* tree.h (VECTOR_CST_NELTS): Use the u.nelts field.
* cfgexpand.c (expand_debug_expr): Use VECTOR_CST_NELTS instead of
TYPE_VECTOR_SUBPARTS.
* expr.c (const_vector_mask_from_tree): Consistently use "units"
as the number of units, setting it from VECTOR_CST_NELTS.
(const_vector_from_tree): Likewise.
* fold-const.c (negate_expr_p): Use VECTOR_CST_NELTS instead of
TYPE_VECTOR_SUBPARTS for the number of elements in a VECTOR_CST.
(fold_negate_expr_1): Likewise.
(fold_convert_const): Likewise.
(const_binop): Likewise. Differentiate the number of output and
input elements.
(const_unop): Likewise.
(fold_ternary_loc): Use VECTOR_CST_NELTS for the number of elements
in a VECTOR_CST, asserting that it is the same as TYPE_VECTOR_SUBPARTS
in cases that did the opposite.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r252758
|
|
PR82045 is about a bootstrap failure on sparc-sun-solaris2.11.
The problem was that we were passing the new machine_mode wrapper
classes through "..." to emit_library_call(_value), which then
read them back as ints instead.
The simplest fix seemed to be replace "..." with an array of
rtx_mode_ts, then provide wrappers for the common cases. This
bulks out rtl.h a bit, but it does make things a bit more typesafe.
2017-09-04 Richard Sandiford <richard.sandiford@linaro.org>
gcc/
PR bootstrap/82045
* rtl.h (emit_library_call_value_1): Declare.
(emit_library_call): Replace declaration with a series of overloads.
Remove the parameter count argument.
(emit_library_call_value): Likewise.
* calls.c (emit_library_call_value_1): Make global. Replace varargs
with an "rtx_mode_t *".
(emit_library_call_value): Delete.
(emit_library_call): Likewise.
* asan.c (asan_emit_stack_protection): Update calls accordingly.
(asan_emit_allocas_unpoison): Likewise.
* builtins.c (expand_builtin_powi): Likewise.
(expand_asan_emit_allocas_unpoison): Likewise.
* cfgexpand.c (expand_main_function): Likewise.
* config/aarch64/aarch64.c (aarch64_trampoline_init): Likewise.
* config/aarch64/aarch64.h (PROFILE_HOOK): Likewise.
* config/alpha/alpha.c (alpha_trampoline_init): Likewise.
* config/arm/arm.c (arm_trampoline_init): Likewise.
(arm_call_tls_get_addr): Likewise.
(arm_expand_divmod_libfunc): Likewise.
* config/bfin/bfin.md (umulsi3_highpart): Likewise.
(smulsi3_highpart): Likewise.
* config/c6x/c6x.c (c6x_initialize_trampoline): Likewise.
(c6x_expand_compare): Likewise.
(c6x_expand_movmem): Likewise.
* config/frv/frv.c (frv_trampoline_init): Likewise.
* config/i386/i386.c (ix86_trampoline_init): Likewise.
(ix86_expand_divmod_libfunc): Likewise.
* config/ia64/ia64.c (ia64_expand_tls_address): Likewise.
(ia64_expand_compare): Likewise.
(ia64_profile_hook): Likewise.
* config/ia64/ia64.md (save_stack_nonlocal): Likewise.
(nonlocal_goto): Likewise.
(restore_stack_nonlocal): Likewise.
* config/m32r/m32r.c (block_move_call): Likewise.
(m32r_trampoline_init): Likewise.
* config/m68k/linux.h (FINALIZE_TRAMPOLINE): Likewise.
* config/m68k/m68k.c (m68k_call_tls_get_addr): Likewise.
(m68k_call_m68k_read_tp): Likewise.
* config/microblaze/microblaze.c (microblaze_call_tls_get_addr)
(microblaze_expand_divide): Likewise.
* config/mips/mips.h (mips_args): Likewise.
* config/mips/sdemtk.h (mips_sync_icache): Likewise.
(MIPS_ICACHE_SYNC): Likewise.
* config/nios2/nios2.c (nios2_emit_expensive_div): Likewise.
(nios2_trampoline_init): Likewise.
* config/pa/pa.c (hppa_tls_call): Likewise.
(pa_trampoline_init): Likewise.
* config/pa/pa.md (canonicalize_funcptr_for_compare): Likewise.
* config/powerpcspe/powerpcspe.c (rs6000_legitimize_tls_address)
(expand_strn_compare): Likewise.
(rs6000_generate_compare): Likewise.
(rs6000_expand_float128_convert): Likewise.
(output_profile_hook): Likewise.
(rs6000_trampoline_init): Likewise.
* config/powerpcspe/powerpcspe.md (neg<mode>2): Likewise.
* config/riscv/riscv.h (PROFILE_HOOK): Likewise.
* config/rs6000/rs6000-string.c (expand_strn_compare): Likewise.
* config/rs6000/rs6000.c (rs6000_legitimize_tls_address): Likewise.
(rs6000_generate_compare): Likewise.
(rs6000_expand_float128_convert): Likewise.
(output_profile_hook): Likewise.
(rs6000_trampoline_init): Likewise.
* config/rs6000/rs6000.md (neg<mode>2): Likewise.
* config/sh/sh.c (sh_trampoline_init): Likewise.
* config/sparc/sparc.c (emit_soft_tfmode_libcall): Likewise.
(sparc_emit_float_lib_cmp): Likewise.
(sparc32_initialize_trampoline): Likewise.
(sparc64_initialize_trampoline): Likewise.
(sparc_profile_hook): Likewise.
* config/spu/spu.c (ea_load_store): Likewise.
* config/spu/spu.md (floatunssidf2): Likewise.
* config/tilegx/tilegx.c (tilegx_trampoline_init): Likewise.
* config/tilepro/tilepro.c (tilepro_trampoline_init): Likewise.
* config/visium/visium.c (expand_block_move_4): Likewise.
(expand_block_move_2): Likewise.
(expand_block_move_1): Likewise.
(expand_block_set_4): Likewise.
(expand_block_set_2): Likewise.
(expand_block_set_1): Likewise.
(visium_trampoline_init): Likewise.
(visium_profile_hook): Likewise.
* config/xtensa/xtensa.c (xtensa_expand_nonlocal_goto): Likewise.
(xtensa_setup_frame_addresses): Likewise.
(xtensa_trampoline_init): Likewise.
* except.c (sjlj_emit_function_enter): Likewise.
(sjlj_emit_function_exit): Likewise.
* explow.c (allocate_dynamic_stack_space): Likewise.
(probe_stack_range): Likewise.
* expr.c (convert_mode_scalar): Likewise.
* optabs.c (expand_binop): Likewise.
(expand_twoval_binop_libfunc): Likewise.
(expand_unop): Likewise.
(prepare_cmp_insn): Likewise.
(prepare_float_lib_cmp): Likewise.
(expand_float): Likewise.
(expand_fix): Likewise.
(expand_fixed_convert): Likewise.
(maybe_emit_sync_lock_test_and_set): Likewise.
(expand_atomic_compare_and_swap): Likewise.
(expand_mem_thread_fence): Likewise.
(expand_atomic_fetch_op): Likewise.
From-SVN: r251637
|
|
This patch adds a scalar_mode class that can hold any scalar mode,
specifically:
- scalar integers
- scalar floating-point values
- scalar fractional modes
- scalar accumulator modes
- pointer bounds modes
To start with this patch uses this type for GET_MODE_INNER.
Later patches add more uses.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* coretypes.h (scalar_mode): New class.
* machmode.h (scalar_mode): Likewise.
(scalar_mode::includes_p): New function.
(mode_to_inner): Return a scalar_mode rather than a machine_mode.
* gdbhooks.py (build_pretty_printers): Handle scalar_mode.
* genmodes.c (get_mode_class): Handle remaining scalar modes.
* cfgexpand.c (expand_debug_expr): Use scalar_mode.
* expmed.c (store_bit_field_1): Likewise.
(extract_bit_field_1): Likewise.
* expr.c (write_complex_part): Likewise.
(read_complex_part): Likewise.
(emit_move_complex_push): Likewise.
(expand_expr_real_2): Likewise.
* function.c (assign_parm_setup_reg): Likewise.
(assign_parms_unsplit_complex): Likewise.
* optabs.c (expand_binop): Likewise.
* rtlanal.c (subreg_get_info): Likewise.
* simplify-rtx.c (simplify_immed_subreg): Likewise.
* varasm.c (output_constant_pool_2): Likewise.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251515
|
|
This patch changes the types of various things from machine_mode
to scalar_int_mode, in cases where (after previous patches)
simply changing the type is enough on its own. The patch does
nothing other than that.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* builtins.h (builtin_strncpy_read_str): Take a scalar_int_mode
instead of a machine_mode.
(builtin_memset_read_str): Likewise.
* builtins.c (c_readstr): Likewise.
(builtin_memcpy_read_str): Likewise.
(builtin_strncpy_read_str): Likewise.
(builtin_memset_read_str): Likewise.
(builtin_memset_gen_str): Likewise.
(expand_builtin_signbit): Use scalar_int_mode for local variables.
* cfgexpand.c (convert_debug_memory_address): Take a scalar_int_mode
instead of a machine_mode.
* combine.c (simplify_if_then_else): Use scalar_int_mode for local
variables.
(make_extraction): Likewise.
(try_widen_shift_mode): Take and return scalar_int_modes instead
of machine_modes.
* config/aarch64/aarch64.c (aarch64_libgcc_cmp_return_mode): Return
a scalar_int_mode instead of a machine_mode.
* config/avr/avr.c (avr_addr_space_address_mode): Likewise.
(avr_addr_space_pointer_mode): Likewise.
* config/cr16/cr16.c (cr16_unwind_word_mode): Likewise.
* config/msp430/msp430.c (msp430_addr_space_pointer_mode): Likewise.
(msp430_unwind_word_mode): Likewise.
* config/spu/spu.c (spu_unwind_word_mode): Likewise.
(spu_addr_space_pointer_mode): Likewise.
(spu_addr_space_address_mode): Likewise.
(spu_libgcc_cmp_return_mode): Likewise.
(spu_libgcc_shift_count_mode): Likewise.
* config/rl78/rl78.c (rl78_addr_space_address_mode): Likewise.
(rl78_addr_space_pointer_mode): Likewise.
(fl78_unwind_word_mode): Likewise.
(rl78_valid_pointer_mode): Take a scalar_int_mode instead of a
machine_mode.
* config/alpha/alpha.c (vms_valid_pointer_mode): Likewise.
* config/ia64/ia64.c (ia64_vms_valid_pointer_mode): Likewise.
* config/mips/mips.c (mips_mode_rep_extended): Likewise.
(mips_valid_pointer_mode): Likewise.
* config/tilegx/tilegx.c (tilegx_mode_rep_extended): Likewise.
* config/ft32/ft32.c (ft32_valid_pointer_mode): Likewise.
(ft32_addr_space_pointer_mode): Return a scalar_int_mode instead
of a machine_mode.
(ft32_addr_space_address_mode): Likewise.
* config/m32c/m32c.c (m32c_valid_pointer_mode): Take a
scalar_int_mode instead of a machine_mode.
(m32c_addr_space_pointer_mode): Return a scalar_int_mode instead
of a machine_mode.
(m32c_addr_space_address_mode): Likewise.
* config/powerpcspe/powerpcspe.c (rs6000_abi_word_mode): Likewise.
(rs6000_eh_return_filter_mode): Likewise.
* config/rs6000/rs6000.c (rs6000_abi_word_mode): Likewise.
(rs6000_eh_return_filter_mode): Likewise.
* config/s390/s390.c (s390_libgcc_cmp_return_mode): Likewise.
(s390_libgcc_shift_count_mode): Likewise.
(s390_unwind_word_mode): Likewise.
(s390_valid_pointer_mode): Take a scalar_int_mode rather than a
machine_mode.
* target.def (mode_rep_extended): Likewise.
(valid_pointer_mode): Likewise.
(addr_space.valid_pointer_mode): Likewise.
(eh_return_filter_mode): Return a scalar_int_mode rather than
a machine_mode.
(libgcc_cmp_return_mode): Likewise.
(libgcc_shift_count_mode): Likewise.
(unwind_word_mode): Likewise.
(addr_space.pointer_mode): Likewise.
(addr_space.address_mode): Likewise.
* doc/tm.texi: Regenerate.
* dojump.c (prefer_and_bit_test): Take a scalar_int_mode rather than
a machine_mode.
(do_jump): Use scalar_int_mode for local variables.
* dwarf2cfi.c (init_return_column_size): Take a scalar_int_mode
rather than a machine_mode.
* dwarf2out.c (convert_descriptor_to_mode): Likewise.
(scompare_loc_descriptor_wide): Likewise.
(scompare_loc_descriptor_narrow): Likewise.
* emit-rtl.c (adjust_address_1): Use scalar_int_mode for local
variables.
* except.c (sjlj_emit_dispatch_table): Likewise.
(expand_builtin_eh_copy_values): Likewise.
* explow.c (convert_memory_address_addr_space_1): Likewise.
Take a scalar_int_mode rather than a machine_mode.
(convert_memory_address_addr_space): Take a scalar_int_mode rather
than a machine_mode.
(memory_address_addr_space): Use scalar_int_mode for local variables.
* expmed.h (expand_mult_highpart_adjust): Take a scalar_int_mode
rather than a machine_mode.
* expmed.c (mask_rtx): Likewise.
(init_expmed_one_conv): Likewise.
(expand_mult_highpart_adjust): Likewise.
(extract_high_half): Likewise.
(expmed_mult_highpart_optab): Likewise.
(expmed_mult_highpart): Likewise.
(expand_smod_pow2): Likewise.
(expand_sdiv_pow2): Likewise.
(emit_store_flag_int): Likewise.
(adjust_bit_field_mem_for_reg): Use scalar_int_mode for local
variables.
(extract_low_bits): Likewise.
* expr.h (by_pieces_constfn): Take a scalar_int_mode rather than
a machine_mode.
* expr.c (pieces_addr::adjust): Likewise.
(can_store_by_pieces): Likewise.
(store_by_pieces): Likewise.
(clear_by_pieces_1): Likewise.
(expand_expr_addr_expr_1): Likewise.
(expand_expr_addr_expr): Use scalar_int_mode for local variables.
(expand_expr_real_1): Likewise.
(try_casesi): Likewise.
* final.c (shorten_branches): Likewise.
* fold-const.c (fold_convert_const_int_from_fixed): Change the
type of "mode" to machine_mode.
* internal-fn.c (expand_arith_overflow_result_store): Take a
scalar_int_mode rather than a machine_mode.
(expand_mul_overflow): Use scalar_int_mode for local variables.
* loop-doloop.c (doloop_modify): Likewise.
(doloop_optimize): Likewise.
* optabs.c (expand_subword_shift): Take a scalar_int_mode rather
than a machine_mode.
(expand_doubleword_shift_condmove): Likewise.
(expand_doubleword_shift): Likewise.
(expand_doubleword_clz): Likewise.
(expand_doubleword_popcount): Likewise.
(expand_doubleword_parity): Likewise.
(expand_absneg_bit): Use scalar_int_mode for local variables.
(prepare_float_lib_cmp): Likewise.
* rtl.h (convert_memory_address_addr_space_1): Take a scalar_int_mode
rather than a machine_mode.
(convert_memory_address_addr_space): Likewise.
(get_mode_bounds): Likewise.
(get_address_mode): Return a scalar_int_mode rather than a
machine_mode.
* rtlanal.c (get_address_mode): Likewise.
* stor-layout.c (get_mode_bounds): Take a scalar_int_mode rather
than a machine_mode.
* targhooks.c (default_mode_rep_extended): Likewise.
(default_valid_pointer_mode): Likewise.
(default_addr_space_valid_pointer_mode): Likewise.
(default_eh_return_filter_mode): Return a scalar_int_mode rather
than a machine_mode.
(default_libgcc_cmp_return_mode): Likewise.
(default_libgcc_shift_count_mode): Likewise.
(default_unwind_word_mode): Likewise.
(default_addr_space_pointer_mode): Likewise.
(default_addr_space_address_mode): Likewise.
* targhooks.h (default_eh_return_filter_mode): Likewise.
(default_libgcc_cmp_return_mode): Likewise.
(default_libgcc_shift_count_mode): Likewise.
(default_unwind_word_mode): Likewise.
(default_addr_space_pointer_mode): Likewise.
(default_addr_space_address_mode): Likewise.
(default_mode_rep_extended): Take a scalar_int_mode rather than
a machine_mode.
(default_valid_pointer_mode): Likewise.
(default_addr_space_valid_pointer_mode): Likewise.
* tree-ssa-address.c (addr_for_mem_ref): Use scalar_int_mode for
local variables.
* tree-ssa-loop-ivopts.c (get_shiftadd_cost): Take a scalar_int_mode
rather than a machine_mode.
* tree-switch-conversion.c (array_value_type): Use scalar_int_mode
for local variables.
* tree-vrp.c (simplify_float_conversion_using_ranges): Likewise.
* var-tracking.c (use_narrower_mode): Take a scalar_int_mode rather
than a machine_mode.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251513
|
|
This patch adds asserting as_a <scalar_int_mode> conversions
to contexts in which the input is known to be a scalar integer mode.
In expand_divmod, op1 is always a scalar_int_mode if
op1_is_constant (but might not be otherwise).
In expand_binop, the patch reverses a < comparison in order to
avoid splitting a long line.
gcc/
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
* cfgexpand.c (convert_debug_memory_address): Use
as_a <scalar_int_mode>.
* combine.c (expand_compound_operation): Likewise.
(make_extraction): Likewise.
(change_zero_ext): Likewise.
(simplify_comparison): Likewise.
* cse.c (cse_insn): Likewise.
* dwarf2out.c (minmax_loc_descriptor): Likewise.
(mem_loc_descriptor): Likewise.
(loc_descriptor): Likewise.
* expmed.c (init_expmed_one_mode): Likewise.
(synth_mult): Likewise.
(emit_store_flag_1): Likewise.
(expand_divmod): Likewise. Use HWI_COMPUTABLE_MODE_P instead
of a comparison with size.
* expr.c (expand_assignment): Use as_a <scalar_int_mode>.
(reduce_to_bit_field_precision): Likewise.
* function.c (expand_function_end): Likewise.
* internal-fn.c (expand_arith_overflow_result_store): Likewise.
* loop-doloop.c (doloop_modify): Likewise.
* optabs.c (expand_binop): Likewise.
(expand_unop): Likewise.
(expand_copysign_absneg): Likewise.
(prepare_cmp_insn): Likewise.
(maybe_legitimize_operand): Likewise.
* recog.c (const_scalar_int_operand): Likewise.
* rtlanal.c (get_address_mode): Likewise.
* simplify-rtx.c (simplify_unary_operation_1): Likewise.
(simplify_cond_clz_ctz): Likewise.
* tree-nested.c (get_nl_goto_field): Likewise.
* tree.c (build_vector_type_for_mode): Likewise.
* var-tracking.c (use_narrower_mode): Likewise.
gcc/c-family/
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
* c-common.c (c_common_type_for_mode): Use as_a <scalar_int_mode>.
gcc/lto/
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
* lto-lang.c (lto_type_for_mode): Use as_a <scalar_int_mode>.
From-SVN: r251487
|
|
This patch adds a SCALAR_INT_TYPE_MODE macro that asserts
that the type has a scalar integer mode and returns it as
a scalar_int_mode.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* tree.h (SCALAR_INT_TYPE_MODE): New macro.
* builtins.c (expand_builtin_signbit): Use it.
* cfgexpand.c (expand_debug_expr): Likewise.
* dojump.c (do_jump): Likewise.
(do_compare_and_jump): Likewise.
* dwarf2cfi.c (expand_builtin_init_dwarf_reg_sizes): Likewise.
* expmed.c (make_tree): Likewise.
* expr.c (expand_expr_real_2): Likewise.
(expand_expr_real_1): Likewise.
(try_casesi): Likewise.
* fold-const-call.c (fold_const_call_ss): Likewise.
* fold-const.c (unextend): Likewise.
(extract_muldiv_1): Likewise.
(fold_single_bit_test): Likewise.
(native_encode_int): Likewise.
(native_encode_string): Likewise.
(native_interpret_int): Likewise.
* gimple-fold.c (gimple_fold_builtin_memset): Likewise.
* internal-fn.c (expand_addsub_overflow): Likewise.
(expand_neg_overflow): Likewise.
(expand_mul_overflow): Likewise.
(expand_arith_overflow): Likewise.
* match.pd: Likewise.
* stor-layout.c (layout_type): Likewise.
* tree-cfg.c (verify_gimple_assign_ternary): Likewise.
* tree-ssa-math-opts.c (convert_mult_to_widen): Likewise.
* tree-ssanames.c (get_range_info): Likewise.
* tree-switch-conversion.c (array_value_type) Likewise.
* tree-vect-patterns.c (vect_recog_rotate_pattern): Likewise.
(vect_recog_divmod_pattern): Likewise.
(vect_recog_mixed_size_cond_pattern): Likewise.
* tree-vrp.c (extract_range_basic): Likewise.
(simplify_float_conversion_using_ranges): Likewise.
* tree.c (int_fits_type_p): Likewise.
* ubsan.c (instrument_bool_enum_load): Likewise.
* varasm.c (mergeable_string_section): Likewise.
(narrowing_initializer_constant_valid_p): Likewise.
(output_constant): Likewise.
gcc/cp/
* cvt.c (cp_convert_to_pointer): Use SCALAR_INT_TYPE_MODE.
gcc/fortran/
* target-memory.c (size_integer): Use SCALAR_INT_TYPE_MODE.
(size_logical): Likewise.
gcc/objc/
* objc-encoding.c (encode_type): Use SCALAR_INT_TYPE_MODE.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251486
|
|
This patch replaces some checks against VOIDmode with checks
of is_a <scalar_int_mode>, in cases where scalar integer modes
were the only useful alternatives left.
gcc/
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
* cfgexpand.c (expand_debug_expr): Use is_a <scalar_int_mode>
instead of != VOIDmode.
* combine.c (if_then_else_cond): Likewise.
(change_zero_ext): Likewise.
* dwarf2out.c (mem_loc_descriptor): Likewise.
(loc_descriptor): Likewise.
* rtlanal.c (canonicalize_condition): Likewise.
* simplify-rtx.c (simplify_relational_operation_1): Likewise.
From-SVN: r251475
|
|
This patch replaces checks of "SCALAR_INT_MODE_P (...)" with
"is_a <scalar_int_mode> (..., &var)" in cases where it becomes
useful to refer to the mode as a scalar_int_mode. It also
replaces some checks for the two constituent classes (MODE_INT
and MODE_PARTIAL_INT).
The patch also introduces is_a <scalar_int_mode> checks for some
uses of HWI_COMPUTABLE_MODE_P, which is a subcondition of
SCALAR_INT_MODE_P.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* wide-int.h (int_traits<unsigned char>) New class.
(int_traits<unsigned short>) Likewise.
* cfgexpand.c (expand_debug_expr): Use is_a <scalar_int_mode>.
Use GET_MODE_UNIT_PRECISION and remove redundant test for
SCALAR_INT_MODE_P.
* combine.c (set_nonzero_bits_and_sign_copies): Use
is_a <scalar_int_mode>.
(find_split_point): Likewise.
(combine_simplify_rtx): Likewise.
(simplify_logical): Likewise.
(expand_compound_operation): Likewise.
(expand_field_assignment): Likewise.
(make_compound_operation): Likewise.
(extended_count): Likewise.
(change_zero_ext): Likewise.
(simplify_comparison): Likewise.
* dwarf2out.c (scompare_loc_descriptor): Likewise.
(ucompare_loc_descriptor): Likewise.
(minmax_loc_descriptor): Likewise.
(mem_loc_descriptor): Likewise.
(loc_descriptor): Likewise.
* expmed.c (init_expmed_one_mode): Likewise.
* lra-constraints.c (lra_constraint_offset): Likewise.
* optabs.c (prepare_libcall_arg): Likewise.
* postreload.c (move2add_note_store): Likewise.
* reload.c (operands_match_p): Likewise.
* rtl.h (load_extend_op): Likewise.
* rtlhooks.c (gen_lowpart_general): Likewise.
* simplify-rtx.c (simplify_truncation): Likewise.
(simplify_unary_operation_1): Likewise.
(simplify_binary_operation_1): Likewise.
(simplify_const_binary_operation): Likewise.
(simplify_const_relational_operation): Likewise.
(simplify_subreg): Likewise.
* stor-layout.c (bitwise_mode_for_mode): Likewise.
* var-tracking.c (adjust_mems): Likewise.
(prepare_call_arguments): Likewise.
gcc/ada/
* gcc-interface/decl.c (check_ok_for_atomic_type): Use
is_a <scalar_int_mode>.
* gcc-interface/trans.c (Pragma_to_gnu): Likewise.
* gcc-interface/utils.c (gnat_type_for_mode): Likewise.
gcc/fortran/
* trans-types.c (gfc_type_for_mode): Use is_a <scalar_int_mode>.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251473
|
|
This patch adds a wrapper around smallest_mode_for_size
for cases in which the mode class is MODE_INT. Unlike
(int_)mode_for_size, smallest_mode_for_size always returns
a mode of the specified class, asserting if no such mode exists.
smallest_int_mode_for_size therefore returns a scalar_int_mode
rather than an opt_scalar_int_mode.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* machmode.h (smallest_mode_for_size): Fix formatting.
(smallest_int_mode_for_size): New function.
* cfgexpand.c (expand_debug_expr): Use smallest_int_mode_for_size
instead of smallest_mode_for_size.
* combine.c (make_extraction): Likewise.
* config/arc/arc.c (arc_expand_movmem): Likewise.
* config/arm/arm.c (arm_expand_divmod_libfunc): Likewise.
* config/i386/i386.c (ix86_get_mask_mode): Likewise.
* config/s390/s390.c (s390_expand_insv): Likewise.
* config/sparc/sparc.c (assign_int_registers): Likewise.
* config/spu/spu.c (spu_function_value): Likewise.
(spu_function_arg): Likewise.
* coverage.c (get_gcov_type): Likewise.
(get_gcov_unsigned_t): Likewise.
* dse.c (find_shift_sequence): Likewise.
* expmed.c (store_bit_field_1): Likewise.
* expr.c (convert_move): Likewise.
(store_field): Likewise.
* internal-fn.c (expand_arith_overflow): Likewise.
* optabs-query.c (get_best_extraction_insn): Likewise.
* optabs.c (expand_twoval_binop_libfunc): Likewise.
* stor-layout.c (layout_type): Likewise.
(initialize_sizetypes): Likewise.
* targhooks.c (default_get_mask_mode): Likewise.
* tree-ssa-loop-manip.c (canonicalize_loop_ivs): Likewise.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251471
|
|
Also use int_mode_for_mode instead of (int_)mode_for_size
in cases where the requested size was the bitsize of an
existing mode.
2017-08-30 Richard Sandiford <richard.sandiford@linaro.org>
Alan Hayward <alan.hayward@arm.com>
David Sherwood <david.sherwood@arm.com>
gcc/
* machmode.h (opt_mode::else_blk): New function.
(int_mode_for_mode): Declare.
* stor-layout.c (int_mode_for_mode): Return an opt_scalar_int_mode.
* builtins.c (expand_builtin_signbit): Adjust for new int_mode_for_mode
return type.
* cfgexpand.c (expand_debug_expr): Likewise.
* combine.c (gen_lowpart_or_truncate): Likewise.
(gen_lowpart_for_combine): Likewise.
* config/aarch64/aarch64.c (aarch64_emit_approx_sqrt): Likewise.
* config/avr/avr.c (avr_to_int_mode): Likewise.
(avr_out_plus_1): Likewise.
(avr_out_plus): Likewise.
(avr_out_round): Likewise.
* config/i386/i386.c (ix86_split_to_parts): Likewise.
* config/s390/s390.c (s390_expand_vec_compare_cc): Likewise.
(s390_expand_vcond): Likewise.
* config/spu/spu.c (spu_split_immediate): Likewise.
(spu_expand_mov): Likewise.
* dse.c (get_stored_val): Likewise.
* expmed.c (store_bit_field_1): Likewise.
(convert_extracted_bit_field): Use int_mode_for_mode instead of
int_mode_for_size.
(extract_bit_field_1): Adjust for new int_mode_for_mode return type.
(extract_low_bits): Likewise.
* expr.c (emit_group_load_1): Likewise. Separate out the BLKmode
handling rather than repeating the check.
(emit_group_store): Likewise.
(emit_move_via_integer): Adjust for new int_mode_for_mode return type.
* optabs.c (expand_absneg_bit): Likewise.
(expand_copysign_absneg): Likewise.
(expand_copysign_bit): Likewise.
* tree-if-conv.c (ifcvt_can_use_mask_load_store): Likewise.
* tree-vect-slp.c (vect_transform_slp_perm_load): Likewise.
* tree-vect-stmts.c (vect_gen_perm_mask_any): Likewise.
* var-tracking.c (prepare_call_arguments): Likewise.
* config/powerpcspe/powerpcspe.c (rs6000_do_expand_vec_perm): Use
int_mode_for_mode instead of mode_for_size.
* config/rs6000/rs6000.c (rs6000_do_expand_vec_perm): Likewise.
Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251470
|
|
2017-08-21 Richard Biener <rguenther@suse.de>
include/
* simple-object.h (simple_object_copy_lto_debug_sections): New
function.
libiberty/
* simple-object-common.h (struct simple_object_functions): Add
copy_lto_debug_sections hook.
* simple-object.c: Include fcntl.h.
(handle_lto_debug_sections): New helper function.
(simple_object_copy_lto_debug_sections): New function copying
early LTO debug sections to regular debug sections in a new file.
(simple_object_start_write): Handle NULL segment_name.
* simple-object-coff.c (simple_object_coff_functions): Adjust
for not implemented copy_lto_debug_sections hook.
* simple-object-mach-o.c (simple_object_mach_o_functions): Likewise.
* simple-object-xcoff.c (simple_object_xcoff_functions): Likewise.
* simple-object-elf.c (SHT_NULL, SHT_SYMTAB, SHT_RELA, SHT_REL,
SHT_GROUP): Add various sectopn header types.
(SHF_EXCLUDE): Add flag.
(Elf32_External_Sym, Elf64_External_Sym): Add symbol struct.
(ELF_ST_BIND, ELF_ST_TYPE, ELF_ST_INFO): Add accessors.
(STT_OBJECT, STT_FUNC, STT_TLS, STT_GNU_IFUNC): Add Symbol types.
(STV_DEFAULT): Add symbol visibility.
(SHN_COMMON): Add special section index name.
(struct simple_object_elf_write): New.
(simple_object_elf_start_write): Adjust for new private data.
(simple_object_elf_write_shdr): Pass in values for all fields
we write.
(simple_object_elf_write_to_file): Adjust. Copy from recorded
section headers if requested.
(simple_object_elf_release_write): Release private data.
(simple_object_elf_copy_lto_debug_sections): Copy and rename sections
as denoted by PFN and all their dependences, symbols and relocations
to the empty destination file.
(simple_object_elf_functions): Adjust for copy_lto_debug_sections hook.
gcc/
* debug.h (struct gcc_debug_hooks): Add die_ref_for_decl and
register_external_die hooks.
(debug_false_tree_charstarstar_uhwistar): Declare.
(debug_nothing_tree_charstar_uhwi): Likewise.
* debug.c (do_nothing_debug_hooks): Adjust.
(debug_false_tree_charstarstar_uhwistar): New do nothing.
(debug_nothing_tree_charstar_uhwi): Likewise.
* dbxout.c (dbx_debug_hooks): Adjust.
(xcoff_debug_hooks): Likewise.
* sdbout.c (sdb_debug_hooks): Likewise.
* vmsdbgout.c (vmsdbg_debug_hooks): Likewise.
* dwarf2out.c (macinfo_label_base): New global.
(dwarf2out_register_external_die): New function for the
register_external_die hook.
(dwarf2out_die_ref_for_decl): Likewise for die_ref_for_decl.
(dwarf2_debug_hooks): Use them.
(dwarf2_lineno_debug_hooks): Adjust.
(struct die_struct): Add with_offset flag.
(DEBUG_LTO_DWO_INFO_SECTION, DEBUG_LTO_INFO_SECTION,
DEBUG_LTO_DWO_ABBREV_SECTION, DEBUG_LTO_ABBREV_SECTION,
DEBUG_LTO_DWO_MACINFO_SECTION, DEBUG_LTO_MACINFO_SECTION,
DEBUG_LTO_DWO_MACRO_SECTION, DEBUG_LTO_MACRO_SECTION,
DEBUG_LTO_LINE_SECTION, DEBUG_LTO_DWO_STR_OFFSETS_SECTION,
DEBUG_LTO_STR_DWO_SECTION, DEBUG_STR_LTO_SECTION): New macros
defining section names for the early LTO debug variants.
(reset_indirect_string): New helper.
(add_AT_external_die_ref): Helper for dwarf2out_register_external_die.
(print_dw_val): Add support for offsetted symbol references.
(get_ultimate_context): Split out from is_cxx.
(is_cxx): Use get_ultimate_context.
(is_fortran): Add decl overload.
(compute_comp_unit_symbol): Split out worker from
compute_section_prefix.
(compute_section_prefix): Call compute_comp_unit_symbol and
set comdat_type_p here.
(output_die): Skip DIE symbol output for the LTO added one.
Handle DIE symbol references with offset.
(output_comp_unit): Guard section name mangling properly.
For LTO debug sections emit a symbol at the section beginning
which we use to refer to its DIEs.
(add_abstract_origin_attribute): For DIEs registered via
dwarf2out_register_external_die directly refer to the early
DIE rather than indirectly through the shadow one we created.
Remove obsolete call to dwarf2out_abstract_function for
non-function/block origins.
(gen_array_type_die): When generating early LTO debug do
not emit DW_AT_string_length.
(gen_formal_parameter_die): Do not re-create DIEs for PARM_DECLs
late when in LTO. As suggested place a gcc_unreachable for
the DECL_ABSTRACT_P case.
(gen_subprogram_die): Avoid another specification DIE
for early built declarations/definitions for the late LTO case.
(gen_variable_die): Add type references for late duplicated VLA dies
when in late LTO.
(gen_inlined_subroutine_die): Do not call dwarf2out_abstract_function,
we have the abstract instance already.
(process_scope_var): Adjust decl DIE contexts in LTO which
first puts them in limbo.
(gen_decl_die): Do not generate type DIEs late apart from
types for VLAs or for decls we do not yet have a DIE. Do not
call dwarf2out_abstract_function late.
(dwarf2out_early_global_decl): Make sure to create DIEs
for abstract instances of a decl first.
(dwarf2out_late_global_decl): Adjust comment.
(output_macinfo_op): With multiple macro sections use
macinfo_label_base to distinguish labels.
(output_macinfo): Likewise. Update macinfo_label_base.
Pass in the line info label.
(note_variable_value_in_expr): When generating LTO resolve
all variable values here by generating DIEs as needed.
(init_sections_and_labels): Add early LTO debug flag parameter
and generate different sections and names if set. Add generation
counter for the labels so we can have multiple of them.
(reset_dies): Helper to allow DIEs to be output multiple times.
(dwarf2out_finish): When outputting DIEs to the fat part of an
LTO object first reset DIEs.
(dwarf2out_early_finish): Output early DIEs when generating LTO.
(modified_type_die): Check for decl_ultimate_origin being self
before recursing.
(gen_type_die_with_usage): Likewise.
(gen_typedef_die): Allow decl_ultimate_origin being self.
(set_decl_abstract_flags): Remove.
(set_block_abstract_flags): Likewise.
(dwarf2out_abstract_function): Treat the early generated DIEs
as the abstract copy and only add DW_AT_inline and
DW_AT_artificial here and call set_decl_origin_self.
If the DIE has an abstract origin don't do anything.
* tree.c (free_lang_data): Build a dummy TRANSLATION_UNIT_DECL
if we have none yet (Go fails to build one, PR78628).
(variably_modified_type_p): Prevent endless recursion for Ada
cyclic pointer types.
* lto-streamer-in.c: Include debug.h.
(dref_queue): New global.
(lto_read_tree_1): Stream in DIE references.
(lto_input_tree): Register DIE references.
(input_function): Stream DECL_DEBUG_ARGS.
* lto-streamer-out.c: Include debug.h.
(lto_write_tree_1): Output DIE references.
(DFS::DFS_write_tree_body): Follow DECL_ABSTRACT_ORIGIN.
Force a TRANSLATION_UNIT_DECL DECL_CONTEXT for file-scope decls.
(output_function): Stream DECL_DEBUG_ARGS.
* tree-streamer-in.c (lto_input_ts_decl_common_tree_pointers):
Stream DECL_ABSTRACT_ORIGIN.
* tree-streamer-out.c (write_ts_decl_common_tree_pointers): Likewise.
(write_ts_decl_minimal_tree_pointers): Force a TRANSLATION_UNIT_DECL
DECL_CONTEXT for file-scope decls.
* lto-streamer.h (struct dref_entry): Declare.
(dref_queue): Likewise.
* cfgexpand.c (pass_expand::execute): Do not call the
outlining_inline_function hook here.
* lto-wrapper.c (debug_obj): New global.
(tool_cleanup): Unlink it if required.
(debug_objcopy): New function.
(run_gcc): Handle early debug sections in the IL files by
extracting them to separate files, partially linkin them and
feeding the result back as result to the linker.
* config/darwin.h (DEBUG_LTO_INFO_SECTION, DEBUG_LTO_ABBREV_SECTION,
DEBUG_LTO_MACINFO_SECTION, DEBUG_LTO_LINE_SECTION,
DEBUG_STR_LTO_SECTION, DEBUG_LTO_MACRO_SECTION): Put early debug
sections into a separate segment.
* config/darwin.c (darwin_asm_named_section): Handle __GNU_DWARF_LTO
segments.
(darwin_asm_dwarf_section): Likewise.
(darwin_asm_output_dwarf_offset): Likewise.
* config/i386/i386.c (make_resolver_func): Set DECL_IGNORED_P.
lto/
* lto.c (unify_scc): Truncate DIE reference queue for dropped SCCs.
(lto_read_decls): Process TRANSLATION_UNIT_DECLs. Remove
TYPE_DECL debug processing, register DIE references from
prevailing SCCs with the debug machinery.
(lto_section_with_id): Handle LTO debug sections.
libstdc++/
* testsuite/libstdc++-prettyprinters/prettyprinters.exp: Run all
tests with -flto as well if supported.
testsuite/
* c-c++-common/asan/global-overflow-1.c: Adjust diagnostic location
regex to handle the LTO case.
* c-c++-common/asan/heap-overflow-1.c: Likewise.
* c-c++-common/asan/misalign-1.c: Likewise.
* c-c++-common/asan/misalign-2.c: Likewise.
* c-c++-common/asan/null-deref-1.c: Likewise.
* c-c++-common/asan/stack-overflow-1.c: Likewise.
* c-c++-common/asan/strncpy-overflow-1.c: Likewise.
* c-c++-common/asan/use-after-free-1.c: Likewise.
* c-c++-common/asan/alloca_big_alignment.c: Likewise.
* c-c++-common/asan/alloca_detect_custom_size.c: Likewise.
* c-c++-common/asan/alloca_overflow_partial.c: Likewise.
* c-c++-common/asan/alloca_overflow_right.c: Likewise.
* c-c++-common/asan/alloca_underflow_left.c: Likewise.
* g++.dg/asan/large-func-test-1.C: Likewise.
* gfortran.dg/save_6.f90: Add -flto -g variant of save_5.f90.
From-SVN: r251220
|
|
.
2017-08-08 Martin Liska <mliska@suse.cz>
* gcc-interface/trans.c: Include header files.
2017-08-08 Martin Liska <mliska@suse.cz>
* objc-gnu-runtime-abi-01.c: Include header files.
* objc-next-runtime-abi-01.c: Likewise.
* objc-next-runtime-abi-02.c: Likewise.
2017-08-08 Martin Liska <mliska@suse.cz>
* asan.c: Include header files.
* attribs.c (build_decl_attribute_variant): New function moved
from tree.[ch].
(build_type_attribute_qual_variant): Likewise.
(cmp_attrib_identifiers): Likewise.
(simple_cst_list_equal): Likewise.
(omp_declare_simd_clauses_equal): Likewise.
(attribute_value_equal): Likewise.
(comp_type_attributes): Likewise.
(build_type_attribute_variant): Likewise.
(lookup_ident_attribute): Likewise.
(remove_attribute): Likewise.
(merge_attributes): Likewise.
(merge_type_attributes): Likewise.
(merge_decl_attributes): Likewise.
(merge_dllimport_decl_attributes): Likewise.
(handle_dll_attribute): Likewise.
(attribute_list_equal): Likewise.
(attribute_list_contained): Likewise.
* attribs.h (lookup_attribute): New function moved from tree.[ch].
(lookup_attribute_by_prefix): Likewise.
* bb-reorder.c: Include header files.
* builtins.c: Likewise.
* calls.c: Likewise.
* cfgexpand.c: Likewise.
* cgraph.c: Likewise.
* cgraphunit.c: Likewise.
* convert.c: Likewise.
* dwarf2out.c: Likewise.
* final.c: Likewise.
* fold-const.c: Likewise.
* function.c: Likewise.
* gimple-expr.c: Likewise.
* gimple-fold.c: Likewise.
* gimple-pretty-print.c: Likewise.
* gimple.c: Likewise.
* gimplify.c: Likewise.
* hsa-common.c: Likewise.
* hsa-gen.c: Likewise.
* internal-fn.c: Likewise.
* ipa-chkp.c: Likewise.
* ipa-cp.c: Likewise.
* ipa-devirt.c: Likewise.
* ipa-fnsummary.c: Likewise.
* ipa-inline.c: Likewise.
* ipa-visibility.c: Likewise.
* ipa.c: Likewise.
* lto-cgraph.c: Likewise.
* omp-expand.c: Likewise.
* omp-general.c: Likewise.
* omp-low.c: Likewise.
* omp-offload.c: Likewise.
* omp-simd-clone.c: Likewise.
* opts-global.c: Likewise.
* passes.c: Likewise.
* predict.c: Likewise.
* sancov.c: Likewise.
* sanopt.c: Likewise.
* symtab.c: Likewise.
* toplev.c: Likewise.
* trans-mem.c: Likewise.
* tree-chkp.c: Likewise.
* tree-eh.c: Likewise.
* tree-into-ssa.c: Likewise.
* tree-object-size.c: Likewise.
* tree-parloops.c: Likewise.
* tree-profile.c: Likewise.
* tree-ssa-ccp.c: Likewise.
* tree-ssa-live.c: Likewise.
* tree-ssa-loop.c: Likewise.
* tree-ssa-sccvn.c: Likewise.
* tree-ssa-structalias.c: Likewise.
* tree-ssa.c: Likewise.
* tree-streamer-in.c: Likewise.
* tree-vectorizer.c: Likewise.
* tree-vrp.c: Likewise.
* tsan.c: Likewise.
* ubsan.c: Likewise.
* varasm.c: Likewise.
* varpool.c: Likewise.
* tree.c: Remove functions moved to attribs.[ch].
* tree.h: Likewise.
* config/aarch64/aarch64.c: Add attrs.h header file.
* config/alpha/alpha.c: Likewise.
* config/arc/arc.c: Likewise.
* config/arm/arm.c: Likewise.
* config/avr/avr.c: Likewise.
* config/bfin/bfin.c: Likewise.
* config/c6x/c6x.c: Likewise.
* config/cr16/cr16.c: Likewise.
* config/cris/cris.c: Likewise.
* config/darwin.c: Likewise.
* config/epiphany/epiphany.c: Likewise.
* config/fr30/fr30.c: Likewise.
* config/frv/frv.c: Likewise.
* config/ft32/ft32.c: Likewise.
* config/h8300/h8300.c: Likewise.
* config/i386/winnt.c: Likewise.
* config/ia64/ia64.c: Likewise.
* config/iq2000/iq2000.c: Likewise.
* config/lm32/lm32.c: Likewise.
* config/m32c/m32c.c: Likewise.
* config/m32r/m32r.c: Likewise.
* config/m68k/m68k.c: Likewise.
* config/mcore/mcore.c: Likewise.
* config/microblaze/microblaze.c: Likewise.
* config/mips/mips.c: Likewise.
* config/mmix/mmix.c: Likewise.
* config/mn10300/mn10300.c: Likewise.
* config/moxie/moxie.c: Likewise.
* config/msp430/msp430.c: Likewise.
* config/nds32/nds32-isr.c: Likewise.
* config/nds32/nds32.c: Likewise.
* config/nios2/nios2.c: Likewise.
* config/nvptx/nvptx.c: Likewise.
* config/pa/pa.c: Likewise.
* config/pdp11/pdp11.c: Likewise.
* config/powerpcspe/powerpcspe.c: Likewise.
* config/riscv/riscv.c: Likewise.
* config/rl78/rl78.c: Likewise.
* config/rx/rx.c: Likewise.
* config/s390/s390.c: Likewise.
* config/sh/sh.c: Likewise.
* config/sol2.c: Likewise.
* config/sparc/sparc.c: Likewise.
* config/spu/spu.c: Likewise.
* config/stormy16/stormy16.c: Likewise.
* config/tilegx/tilegx.c: Likewise.
* config/tilepro/tilepro.c: Likewise.
* config/v850/v850.c: Likewise.
* config/vax/vax.c: Likewise.
* config/visium/visium.c: Likewise.
* config/xtensa/xtensa.c: Likewise.
2017-08-08 Martin Liska <mliska@suse.cz>
* call.c: Include header files.
* cp-gimplify.c: Likewise.
* cp-ubsan.c: Likewise.
* cvt.c: Likewise.
* init.c: Likewise.
* search.c: Likewise.
* semantics.c: Likewise.
* typeck.c: Likewise.
2017-08-08 Martin Liska <mliska@suse.cz>
* lto-lang.c: Include header files.
* lto-symtab.c: Likewise.
2017-08-08 Martin Liska <mliska@suse.cz>
* c-convert.c: Include header files.
* c-typeck.c: Likewise.
2017-08-08 Martin Liska <mliska@suse.cz>
* c-ada-spec.c: Include header files.
* c-ubsan.c: Likewise.
* c-warn.c: Likewise.
2017-08-08 Martin Liska <mliska@suse.cz>
* trans-types.c: Include header files.
From-SVN: r250946
|
|
* predict.c (propagate_unlikely_bbs_forward): Break out from ...
(determine_unlikely_bbs): ... here.
* predict.h (propagate_unlikely_bbs_forward): Declare.
* cfgexpand.c (pass_expand::execute): Use it.
* bb-reorder.c (sanitize_hot_paths): Do not consider known to be
unlikely edges.
(find_rarely_executed_basic_blocks_and_crossing_edges): Use
propagate_unlikely_bbs_forward.
From-SVN: r250360
|
|
2017-07-14 Martin Liska <mliska@suse.cz>
* cfgexpand.c (expand_gimple_basic_block): Remove dead comment.
* dwarf2out.c (is_java): Remove the function.
(output_pubname): Remove usage of the function.
(lower_bound_default): Remove usage of DW_LANG_Java.
(gen_compile_unit_die): Likewise.
* gcc.c: Remove compiler defaults for .java and .zip files.
* gimple-expr.c (remove_suffix): Change as there's no longer
extension than 4-letter one.
* gimplify.c (mostly_copy_tree_r): Remove Java-special part.
(gimplify_save_expr): Likewise.
* ipa-utils.h (polymorphic_type_binfo_p): Remove the comment
as it's possible even for other languages than Java.
* langhooks.h (struct lang_hooks): Remove Java from a comment.
* lto-opts.c (lto_write_options): Remove reference to Java.
* opts.c (strip_off_ending): Update file extension handling.
* tree-cfg.c (verify_gimple_call): Remove comment with Java.
* tree-eh.c (lower_resx): Likewise.
* tree.c (free_lang_data_in_type): Remove dead code.
(find_decls_types_r): Likewise.
(build_common_builtin_nodes): Remove Java from a comment.
(verify_type): Remove dead code.
* varasm.c (assemble_external): Remove Java from a comment.
From-SVN: r250199
|
|
gcc/
* asan.h (asan_sanitize_allocas_p): Declare.
* asan.c (asan_sanitize_allocas_p): New function.
(handle_builtin_stack_restore): Bail out if !asan_sanitize_allocas_p.
(handle_builtin_alloca): Likewise.
* cfgexpand.c (expand_used_vars): Do not add allocas unpoisoning stuff
if !asan_sanitize_allocas_p.
* params.def (asan-instrument-allocas): Add new option.
* params.h (ASAN_PROTECT_ALLOCAS): Define.
* opts.c (common_handle_option): Disable allocas sanitization for
KASan by default.
gcc/testsuite/
* c-c++-common/asan/kasan-alloca-1.c: New test.
* c-c++-common/asan/kasan-alloca-2.c: Likewise.
From-SVN: r250032
|
|
gcc/
* asan.c: Include gimple-fold.h.
(get_last_alloca_addr): New function.
(handle_builtin_stackrestore): Likewise.
(handle_builtin_alloca): Likewise.
(asan_emit_allocas_unpoison): Likewise.
(get_mem_refs_of_builtin_call): Add new parameter, remove const
quallifier from first paramerer. Handle BUILT_IN_ALLOCA,
BUILT_IN_ALLOCA_WITH_ALIGN and BUILT_IN_STACK_RESTORE builtins.
(instrument_builtin_call): Pass gimple iterator to
get_mem_refs_of_builtin_call.
(last_alloca_addr): New global.
* asan.h (asan_emit_allocas_unpoison): Declare.
* builtins.c (expand_asan_emit_allocas_unpoison): New function.
(expand_builtin): Handle BUILT_IN_ASAN_ALLOCAS_UNPOISON.
* cfgexpand.c (expand_used_vars): Call asan_emit_allocas_unpoison
if function calls alloca.
* gimple-fold.c (replace_call_with_value): Remove static keyword.
* gimple-fold.h (replace_call_with_value): Declare.
* internal-fn.c: Include asan.h.
* sanitizer.def (BUILT_IN_ASAN_ALLOCA_POISON,
BUILT_IN_ASAN_ALLOCAS_UNPOISON): New builtins.
gcc/testsuite/
* c-c++-common/asan/alloca_big_alignment.c: New test.
* c-c++-common/asan/alloca_detect_custom_size.c: Likewise.
* c-c++-common/asan/alloca_instruments_all_paddings.c: Likewise.
* c-c++-common/asan/alloca_loop_unpoisoning.c: Likewise.
* c-c++-common/asan/alloca_overflow_partial.c: Likewise.
* c-c++-common/asan/alloca_overflow_right.c: Likewise.
* c-c++-common/asan/alloca_safe_access.c: Likewise.
* c-c++-common/asan/alloca_underflow_left.c: Likewise.
From-SVN: r250031
|
|
* ggc.h (empty_string): Delete.
* cfgexpand.c (expand_asm_stmt): Use plain "".
* optabs.c (expand_asm_memory_barrier): Likewise.
* stringpool.c (empty_string): Delete.
(digit_vector, digit_string): Delete.
(ggc_alloc_string): Use plain "", don't optimize single digit
strings. Use ggc_alloc_atomic.
From-SVN: r249851
|
|
* asan.c (asan_emit_stack_protection): Update.
(create_cond_insert_point): Update.
* auto-profile.c (afdo_propagate_circuit): Update.
* basic-block.h (struct edge_def): Turn probability to
profile_probability.
(EDGE_FREQUENCY): Update.
* bb-reorder.c (find_traces_1_round): Update.
(better_edge_p): Update.
(sanitize_hot_paths): Update.
* cfg.c (unchecked_make_edge): Initialize probability to uninitialized.
(make_single_succ_edge): Update.
(check_bb_profile): Update.
(dump_edge_info): Update.
(update_bb_profile_for_threading): Update.
* cfganal.c (connect_infinite_loops_to_exit): Initialize new edge
probabilitycount to 0.
* cfgbuild.c (compute_outgoing_frequencies): Update.
* cfgcleanup.c (try_forward_edges): Update.
(outgoing_edges_match): Update.
(try_crossjump_to_edge): Update.
* cfgexpand.c (expand_gimple_cond): Update make_single_succ_edge.
(expand_gimple_tailcall): Update.
(construct_init_block): Use make_single_succ_edge.
(construct_exit_block): Use make_single_succ_edge.
* cfghooks.c (verify_flow_info): Update.
(redirect_edge_succ_nodup): Update.
(split_edge): Update.
(account_profile_record): Update.
* cfgloopanal.c (single_likely_exit): Update.
* cfgloopmanip.c (scale_loop_profile): Update.
(set_zero_probability): Remove.
(duplicate_loop_to_header_edge): Update.
* cfgloopmanip.h (loop_version): Update prototype.
* cfgrtl.c (try_redirect_by_replacing_jump): Update.
(force_nonfallthru_and_redirect): Update.
(update_br_prob_note): Update.
(rtl_verify_edges): Update.
(purge_dead_edges): Update.
(rtl_lv_add_condition_to_bb): Update.
* cgraph.c: (cgraph_edge::redirect_call_stmt_to_calle): Update.
* cgraphunit.c (init_lowered_empty_function): Update.
(cgraph_node::expand_thunk): Update.
* cilk-common.c: Include profile-count.h
* dojump.c (inv): Remove.
(jumpifnot): Update.
(jumpifnot_1): Update.
(do_jump_1): Update.
(do_jump): Update.
(do_jump_by_parts_greater_rtx): Update.
(do_compare_rtx_and_jump): Update.
* dojump.h (jumpifnot, jumpifnot_1, jumpif_1, jumpif, do_jump,
do_jump_1. do_compare_rtx_and_jump): Update prototype.
* dwarf2cfi.c: Include profile-count.h
* except.c (dw2_build_landing_pads): Use make_single_succ_edge.
(sjlj_emit_dispatch_table): Likewise.
* explow.c: Include profile-count.h
* expmed.c (emit_store_flag_force): Update.
(do_cmp_and_jump): Update.
* expr.c (compare_by_pieces_d::generate): Update.
(compare_by_pieces_d::finish_mode): Update.
(emit_block_move_via_loop): Update.
(store_expr_with_bounds): Update.
(store_constructor): Update.
(expand_expr_real_2): Update.
(expand_expr_real_1): Update.
* expr.h (try_casesi, try_tablejump): Update prototypes.
* gimple-pretty-print.c (dump_probability): Update.
(dump_profile): New.
(dump_gimple_label): Update.
(dump_gimple_bb_header): Update.
* graph.c (draw_cfg_node_succ_edges): Update.
* hsa-gen.c (convert_switch_statements): Update.
* ifcvt.c (cheap_bb_rtx_cost_p): Update.
(find_if_case_1): Update.
(find_if_case_2): Update.
* internal-fn.c (expand_arith_overflow_result_store): Update.
(expand_addsub_overflow): Update.
(expand_neg_overflow): Update.
(expand_mul_overflow): Update.
(expand_vector_ubsan_overflow): Update.
* ipa-cp.c (good_cloning_opportunity_p): Update.
* ipa-split.c (split_function): Use make_single_succ_edge.
* ipa-utils.c (ipa_merge_profiles): Update.
* loop-doloop.c (add_test): Update.
(doloop_modify): Update.
* loop-unroll.c (compare_and_jump_seq): Update.
(unroll_loop_runtime_iterations): Update.
* lra-constraints.c (lra_inheritance): Update.
* lto-streamer-in.c (input_cfg): Update.
* lto-streamer-out.c (output_cfg): Update.
* mcf.c (adjust_cfg_counts): Update.
* modulo-sched.c (sms_schedule): Update.
* omp-expand.c (expand_omp_for_init_counts): Update.
(extract_omp_for_update_vars): Update.
(expand_omp_ordered_sink): Update.
(expand_omp_for_ordered_loops): Update.
(expand_omp_for_generic): Update.
(expand_omp_for_static_nochunk): Update.
(expand_omp_for_static_chunk): Update.
(expand_cilk_for): Update.
(expand_omp_simd): Update.
(expand_omp_taskloop_for_outer): Update.
(expand_omp_taskloop_for_inner): Update.
* omp-simd-clone.c (simd_clone_adjust): Update.
* optabs.c (expand_doubleword_shift): Update.
(expand_abs): Update.
(emit_cmp_and_jump_insn_1): Update.
(expand_compare_and_swap_loop): Update.
* optabs.h (emit_cmp_and_jump_insns): Update prototype.
* predict.c (predictable_edge_p): Update.
(edge_probability_reliable_p): Update.
(set_even_probabilities): Update.
(combine_predictions_for_insn): Update.
(combine_predictions_for_bb): Update.
(propagate_freq): Update.
(estimate_bb_frequencies): Update.
(force_edge_cold): Update.
* profile-count.c (profile_count::dump): Add missing space into dump.
(profile_count::debug): Add newline.
(profile_count::differs_from_p): Explicitly convert to unsigned.
(profile_count::stream_in): Update.
(profile_probability::dump): New member function.
(profile_probability::debug): New member function.
(profile_probability::differs_from_p): New member function.
(profile_probability::differs_lot_from_p): New member function.
(profile_probability::stream_in): New member function.
(profile_probability::stream_out): New member function.
* profile-count.h (profile_count_quality): Rename to ...
(profile_quality): ... this one.
(profile_probability): New.
(profile_count): Update.
* profile.c (compute_branch_probabilities): Update.
* recog.c (peep2_attempt): Update.
* sched-ebb.c (schedule_ebbs): Update.
* sched-rgn.c (find_single_block_region): Update.
(compute_dom_prob_ps): Update.
(schedule_region): Update.
* sel-sched-ir.c (compute_succs_info): Update.
* stmt.c (struct case_node): Update.
(do_jump_if_equal): Update.
(get_outgoing_edge_probs): Update.
(conditional_probability): Update.
(emit_case_dispatch_table): Update.
(expand_case): Update.
(expand_sjlj_dispatch_table): Update.
(emit_case_nodes): Update.
* targhooks.c: Update.
* tracer.c (better_p): Update.
(find_best_successor): Update.
* trans-mem.c (expand_transaction): Update.
* tree-call-cdce.c: Update.
* tree-cfg.c (gimple_split_edge): Upate.
(move_sese_region_to_fn): Upate.
* tree-cfgcleanup.c (cleanup_control_expr_graph): Upate.
* tree-eh.c (lower_resx): Upate.
(cleanup_empty_eh_move_lp): Upate.
* tree-if-conv.c (version_loop_for_if_conversion): Update.
* tree-inline.c (copy_edges_for_bb): Update.
(copy_cfg_body): Update.
* tree-parloops.c (gen_parallel_loop): Update.
* tree-profile.c (gimple_gen_ic_func_profiler): Update.
(gimple_gen_time_profiler): Update.
* tree-ssa-dce.c (remove_dead_stmt): Update.
* tree-ssa-ifcombine.c (update_profile_after_ifcombine): Update.
* tree-ssa-loop-im.c (execute_sm_if_changed): Update.
* tree-ssa-loop-ivcanon.c (remove_exits_and_undefined_stmts): Update.
(unloop_loops): Update.
(try_peel_loop): Update.
* tree-ssa-loop-manip.c (tree_transform_and_unroll_loop): Update.
* tree-ssa-loop-split.c (connect_loops): Update.
(split_loop): Update.
* tree-ssa-loop-unswitch.c (tree_unswitch_loop): Update.
(hoist_guard): Update.
* tree-ssa-phionlycprop.c (propagate_rhs_into_lhs): Update.
* tree-ssa-phiopt.c (replace_phi_edge_with_variable): Update.
(value_replacement): Update.
* tree-ssa-reassoc.c (branch_fixup): Update.
* tree-ssa-tail-merge.c (replace_block_by): Update.
* tree-ssa-threadupdate.c (remove_ctrl_stmt_and_useless_edges): Update.
(create_edge_and_update_destination_phis): Update.
(compute_path_counts): Update.
(recompute_probabilities): Update.
(update_joiner_offpath_counts): Update.
(freqs_to_counts_path): Update.
(duplicate_thread_path): Update.
* tree-switch-conversion.c (hoist_edge_and_branch_if_true): Update.
(struct switch_conv_info): Update.
(gen_inbound_check): Update.
* tree-vect-loop-manip.c (slpeel_add_loop_guard): Update.
(vect_do_peeling): Update.
(vect_loop_versioning): Update.
* tree-vect-loop.c (scale_profile_for_vect_loop): Update.
(optimize_mask_stores): Update.
* ubsan.c (ubsan_expand_null_ifn): Update.
* value-prof.c (gimple_divmod_fixed_value): Update.
(gimple_divmod_fixed_value_transform): Update.
(gimple_mod_pow2): Update.
(gimple_mod_pow2_value_transform): Update.
(gimple_mod_subtract): Update.
(gimple_mod_subtract_transform): Update.
(gimple_ic): Update.
(gimple_stringop_fixed_value): Update.
(gimple_stringops_transform): Update.
* value-prof.h: Update.
From-SVN: r249800
|
|
gcc/
PR middle-end/81194
* cfgexpand.c (expand_gimple_stmt_1): Handle switch statements
with only one label.
* stmt.c (expand_case): Assert NCASES is greater than one.
gcc/testsuite/
PR middle-end/81194
* g++.dg/pr81194.C: New test.
From-SVN: r249783
|
|
* cfgexpand.c (expand_gimple_tailcall): Initialize profile of
new edge.
* ipa-inline.c (want_inline_self_recursive_call_p): Watch for missing
profile in callgraph edge.
* profile-count.h (apply_probability): If THIS is 0, then result is 0
(apply_scale): Likewise.
* tree-inline.c (copy_bb, copy_edges_for_bb, copy_cfg_body):
Also scale profile when inlining function with zero profile.
(initialize_cfun): Update exit block profile even when it is zero.
* tree-ssa-threadupdate.c (clear_counts_path): Handle correctly case
when profile is read.
From-SVN: r248885
|
