diff options
Diffstat (limited to 'gcc')
| -rw-r--r-- | gcc/ChangeLog | 10 | ||||
| -rw-r--r-- | gcc/config/rs6000/rs6000.c | 119 |
2 files changed, 86 insertions, 43 deletions
diff --git a/gcc/ChangeLog b/gcc/ChangeLog index f4ef9ad..658a8e2 100644 --- a/gcc/ChangeLog +++ b/gcc/ChangeLog @@ -1,3 +1,13 @@ +2017-08-17 Alan Modra <amodra@gmail.com> + + PR target/80938 + * config/rs6000/rs6000.c (rs6000_savres_strategy): Revert 2017-08-09. + Don't use store multiple if only one reg needs saving. + (interesting_frame_related_regno): New function. + (rs6000_frame_related): Don't emit frame info for regs that + don't need saving. + (rs6000_emit_epilogue): Likewise. + 2017-08-16 Nathan Sidwell <nathan@acm.org> * tree-core.h (tree_type_non_common): Rename binfo to lang_1. diff --git a/gcc/config/rs6000/rs6000.c b/gcc/config/rs6000/rs6000.c index f9aa13b..5ae7613 100644 --- a/gcc/config/rs6000/rs6000.c +++ b/gcc/config/rs6000/rs6000.c @@ -24445,20 +24445,36 @@ rs6000_savres_strategy (rs6000_stack_t *info, && flag_shrink_wrap_separate && optimize_function_for_speed_p (cfun))) { - /* Prefer store multiple for saves over out-of-line routines, - since the store-multiple instruction will always be smaller. */ - strategy |= SAVE_INLINE_GPRS | SAVE_MULTIPLE; - - /* The situation is more complicated with load multiple. We'd - prefer to use the out-of-line routines for restores, since the - "exit" out-of-line routines can handle the restore of LR and the - frame teardown. However if doesn't make sense to use the - out-of-line routine if that is the only reason we'd need to save - LR, and we can't use the "exit" out-of-line gpr restore if we - have saved some fprs; In those cases it is advantageous to use - load multiple when available. */ - if (info->first_fp_reg_save != 64 || !lr_save_p) - strategy |= REST_INLINE_GPRS | REST_MULTIPLE; + int count = 0; + for (int i = info->first_gp_reg_save; i < 32; i++) + if (save_reg_p (i)) + count++; + + if (count <= 1) + /* Don't use store multiple if only one reg needs to be + saved. This can occur for example when the ABI_V4 pic reg + (r30) needs to be saved to make calls, but r31 is not + used. */ + strategy |= SAVE_INLINE_GPRS | REST_INLINE_GPRS; + else + { + /* Prefer store multiple for saves over out-of-line + routines, since the store-multiple instruction will + always be smaller. */ + strategy |= SAVE_INLINE_GPRS | SAVE_MULTIPLE; + + /* The situation is more complicated with load multiple. + We'd prefer to use the out-of-line routines for restores, + since the "exit" out-of-line routines can handle the + restore of LR and the frame teardown. However if doesn't + make sense to use the out-of-line routine if that is the + only reason we'd need to save LR, and we can't use the + "exit" out-of-line gpr restore if we have saved some + fprs; In those cases it is advantageous to use load + multiple when available. */ + if (info->first_fp_reg_save != 64 || !lr_save_p) + strategy |= REST_INLINE_GPRS | REST_MULTIPLE; + } } /* Using the "exit" out-of-line routine does not improve code size @@ -24467,21 +24483,6 @@ rs6000_savres_strategy (rs6000_stack_t *info, else if (!lr_save_p && info->first_gp_reg_save > 29) strategy |= SAVE_INLINE_GPRS | REST_INLINE_GPRS; - /* We can only use save multiple if we need to save all the registers from - first_gp_reg_save. Otherwise, the CFI gets messed up (we save some - register we do not restore). */ - if (strategy & SAVE_MULTIPLE) - { - int i; - - for (i = info->first_gp_reg_save; i < 32; i++) - if (fixed_reg_p (i) || !save_reg_p (i)) - { - strategy &= ~SAVE_MULTIPLE; - break; - } - } - /* Don't ever restore fixed regs. */ if ((strategy & (REST_INLINE_GPRS | REST_MULTIPLE)) != REST_INLINE_GPRS) for (int i = info->first_gp_reg_save; i < 32; i++) @@ -25654,6 +25655,38 @@ output_probe_stack_range (rtx reg1, rtx reg2) return ""; } +/* This function is called when rs6000_frame_related is processing + SETs within a PARALLEL, and returns whether the REGNO save ought to + be marked RTX_FRAME_RELATED_P. The PARALLELs involved are those + for out-of-line register save functions, store multiple, and the + Darwin world_save. They may contain registers that don't really + need saving. */ + +static bool +interesting_frame_related_regno (unsigned int regno) +{ + /* Saves apparently of r0 are actually saving LR. It doesn't make + sense to substitute the regno here to test save_reg_p (LR_REGNO). + We *know* LR needs saving, and dwarf2cfi.c is able to deduce that + (set (mem) (r0)) is saving LR from a prior (set (r0) (lr)) marked + as frame related. */ + if (regno == 0) + return true; + /* If we see CR2 then we are here on a Darwin world save. Saves of + CR2 signify the whole CR is being saved. This is a long-standing + ABI wart fixed by ELFv2. As for r0/lr there is no need to check + that CR needs to be saved. */ + if (regno == CR2_REGNO) + return true; + /* Omit frame info for any user-defined global regs. If frame info + is supplied for them, frame unwinding will restore a user reg. + Also omit frame info for any reg we don't need to save, as that + bloats frame info and can cause problems with shrink wrapping. + Since global regs won't be seen as needing to be saved, both of + these conditions are covered by save_reg_p. */ + return save_reg_p (regno); +} + /* Add to 'insn' a note which is PATTERN (INSN) but with REG replaced with (plus:P (reg 1) VAL), and with REG2 replaced with REPL2 if REG2 is not NULL. It would be nice if dwarf2out_frame_debug_expr could @@ -25688,13 +25721,8 @@ rs6000_frame_related (rtx_insn *insn, rtx reg, HOST_WIDE_INT val, { rtx set = XVECEXP (pat, 0, i); - /* If this PARALLEL has been emitted for out-of-line - register save functions, or store multiple, then omit - eh_frame info for any user-defined global regs. If - eh_frame info is supplied, frame unwinding will - restore a user reg. */ if (!REG_P (SET_SRC (set)) - || !fixed_reg_p (REGNO (SET_SRC (set)))) + || interesting_frame_related_regno (REGNO (SET_SRC (set)))) RTX_FRAME_RELATED_P (set) = 1; } RTX_FRAME_RELATED_P (insn) = 1; @@ -25731,9 +25759,8 @@ rs6000_frame_related (rtx_insn *insn, rtx reg, HOST_WIDE_INT val, set = simplify_replace_rtx (set, reg2, repl2); XVECEXP (pat, 0, i) = set; - /* Omit eh_frame info for any user-defined global regs. */ if (!REG_P (SET_SRC (set)) - || !fixed_reg_p (REGNO (SET_SRC (set)))) + || interesting_frame_related_regno (REGNO (SET_SRC (set)))) RTX_FRAME_RELATED_P (set) = 1; } } @@ -27956,7 +27983,8 @@ rs6000_emit_epilogue (int sibcall) RTVEC_ELT (p, j++) = gen_frame_load (reg, frame_reg_rtx, info->gp_save_offset + reg_size * i); - if (flag_shrink_wrap) + if (flag_shrink_wrap + && save_reg_p (info->first_gp_reg_save + i)) cfa_restores = alloc_reg_note (REG_CFA_RESTORE, reg, cfa_restores); } for (i = 0; info->first_altivec_reg_save + i <= LAST_ALTIVEC_REGNO; i++) @@ -27965,7 +27993,8 @@ rs6000_emit_epilogue (int sibcall) RTVEC_ELT (p, j++) = gen_frame_load (reg, frame_reg_rtx, info->altivec_save_offset + 16 * i); - if (flag_shrink_wrap) + if (flag_shrink_wrap + && save_reg_p (info->first_altivec_reg_save + i)) cfa_restores = alloc_reg_note (REG_CFA_RESTORE, reg, cfa_restores); } for (i = 0; info->first_fp_reg_save + i <= 63; i++) @@ -27975,7 +28004,8 @@ rs6000_emit_epilogue (int sibcall) info->first_fp_reg_save + i); RTVEC_ELT (p, j++) = gen_frame_load (reg, frame_reg_rtx, info->fp_save_offset + 8 * i); - if (flag_shrink_wrap) + if (flag_shrink_wrap + && save_reg_p (info->first_fp_reg_save + i)) cfa_restores = alloc_reg_note (REG_CFA_RESTORE, reg, cfa_restores); } RTVEC_ELT (p, j++) @@ -28096,7 +28126,8 @@ rs6000_emit_epilogue (int sibcall) && (flag_shrink_wrap || (offset_below_red_zone_p (info->altivec_save_offset - + 16 * (i - info->first_altivec_reg_save))))) + + 16 * (i - info->first_altivec_reg_save)))) + && save_reg_p (i)) { rtx reg = gen_rtx_REG (V4SImode, i); cfa_restores = alloc_reg_note (REG_CFA_RESTORE, reg, cfa_restores); @@ -28308,7 +28339,8 @@ rs6000_emit_epilogue (int sibcall) for (i = info->first_altivec_reg_save; i <= LAST_ALTIVEC_REGNO; ++i) if (((strategy & REST_INLINE_VRS) == 0 || (info->vrsave_mask & ALTIVEC_REG_BIT (i)) != 0) - && (DEFAULT_ABI == ABI_V4 || flag_shrink_wrap)) + && (DEFAULT_ABI == ABI_V4 || flag_shrink_wrap) + && save_reg_p (i)) { rtx reg = gen_rtx_REG (V4SImode, i); cfa_restores = alloc_reg_note (REG_CFA_RESTORE, reg, cfa_restores); @@ -28654,7 +28686,8 @@ rs6000_emit_epilogue (int sibcall) RTVEC_ELT (p, elt++) = gen_frame_load (reg, sp_reg_rtx, info->fp_save_offset + 8 * i); - if (flag_shrink_wrap) + if (flag_shrink_wrap + && save_reg_p (info->first_fp_reg_save + i)) cfa_restores = alloc_reg_note (REG_CFA_RESTORE, reg, cfa_restores); } |