diff options
Diffstat (limited to 'gcc/ada/vms_data.ads')
| -rw-r--r-- | gcc/ada/vms_data.ads | 58 |
1 files changed, 29 insertions, 29 deletions
diff --git a/gcc/ada/vms_data.ads b/gcc/ada/vms_data.ads index f77f261..7dc0bf0 100644 --- a/gcc/ada/vms_data.ads +++ b/gcc/ada/vms_data.ads @@ -56,7 +56,7 @@ -- - a contiguous sequence of comments that constitute the -- documentation of the qualifier. --- - each command zone ends with the declaration of the contant array +-- - each command zone ends with the declaration of the constant array -- for the command, of the form: -- <Command>__Switches : aliased constant Switches := @@ -67,7 +67,7 @@ package VMS_Data is -- QUALIFIERS -- ---------------- - -- The syntax of a qualifier delaration is as follows: + -- The syntax of a qualifier declaration is as follows: -- SWITCH_STRING ::= "/ command-qualifier-name TRANSLATION" @@ -109,7 +109,7 @@ package VMS_Data is -- The unix-switch-string always starts with a minus, and has no commas -- or spaces in it. Case is significant in the unix switch string. If a -- unix switch string is preceded by the not sign (!) it means that the - -- effect of the corresponding command qualifer is to remove any previous + -- effect of the corresponding command qualifier is to remove any previous -- occurrence of the given switch in the command line. -- The DIRECTORIES_TRANSLATION format is used where a list of directories @@ -149,7 +149,7 @@ package VMS_Data is -- The COMMANDS_TRANSLATION case is only used for gnatmake, to correspond -- to the use of -cargs, -bargs and -largs (the ARGS string as indicated -- is one of these three possibilities). The name given by COMMAND is the - -- corresponding command name to be used to interprete the switches to be + -- corresponding command name to be used to interpret the switches to be -- passed on. Switches of this type set modes, e.g. /COMPILER_QUALIFIERS -- sets the mode so that all subsequent switches, up to another switch -- with COMMANDS_TRANSLATION apply to the corresponding commands issued @@ -162,7 +162,7 @@ package VMS_Data is -- since all subsequent switches apply to an issued command. -- For the DIRECT_TRANSLATION case, an implicit additional qualifier - -- declaration is created by prepending NO to the name of the qualifer, + -- declaration is created by prepending NO to the name of the qualifier, -- and then inverting the sense of the UNIX_SWITCHES string. For example, -- given the qualifier definition: @@ -182,7 +182,7 @@ package VMS_Data is -- String pointer type used throughout type Switches is array (Natural range <>) of String_Ptr; - -- Type used for array of swtiches + -- Type used for array of switches type Switches_Ptr is access constant Switches; @@ -513,7 +513,7 @@ package VMS_Data is -- /NORESTRICTION_LIST (D) -- /RESTRICTION_LIST -- - -- Generate list of pragma Rerstrictions that could be applied to the + -- Generate list of pragma Restrictions that could be applied to the -- current unit. This is useful for code audit purposes, and also may be -- used to improve code generation in some cases. @@ -526,7 +526,7 @@ package VMS_Data is -- /RETURN_CODES=VMS -- -- Specifies the style of default exit code returned. Must be used in - -- conjunction with and match the Link qualifer with same name. + -- conjunction with and match the Link qualifier with same name. -- -- POSIX (D) Return Posix success (0) by default. -- @@ -772,7 +772,7 @@ package VMS_Data is -- /NOLOCS (D) -- /LOCS -- - -- Use full source locations referebces in the report file. + -- Use full source locations references in the report file. S_Check_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" & "DEFAULT " & @@ -821,7 +821,7 @@ package VMS_Data is -- /SECTIONS[=section-option, section-option, ...] -- -- Specify what sections should be included into the report file. - -- By default, all three section (diagnises in the format correcponding + -- By default, all three section (diagnoses in the format corresponding -- to compiler error and warning messages, diagnoses grouped by rules and -- then - by files, diagnoses grouped by files and then - by rules) are -- included in the report file. @@ -829,7 +829,7 @@ package VMS_Data is -- section-option may be one of the following: -- -- COMPILER_STYLE Include diagnostics in compile-style format - -- (diagoses are grouped by files, for each file + -- (diagnoses are grouped by files, for each file -- they are ordered according to the references -- into the source) -- BY_RULES Include diagnostics grouped first by rules and @@ -1072,7 +1072,7 @@ package VMS_Data is -- -- Causes the file modification time stamp of the input file to be -- preserved and used for the time stamp of the output file(s). This may - -- be useful for preserving coherency of time stamps in an enviroment + -- be useful for preserving coherency of time stamps in an environment -- where gnatchop is used as part of a standard build process. S_Chop_Quiet : aliased constant S := "/QUIET " & @@ -1253,7 +1253,7 @@ package VMS_Data is -- /NOQUIET (D) -- /QUIET -- - -- Quiet output. If there are no error, do not ouuput anything, except in + -- Quiet output. If there are no error, do not output anything, except in -- verbose mode (qualifier /VERBOSE) or in informative-only mode -- (qualifier /NODELETE). @@ -1661,7 +1661,7 @@ package VMS_Data is -- forces generation of the .ALI file. This file is marked as being -- in error, so it cannot be used for binding purposes, but it does -- contain reasonably complete cross-reference information, and thus may - -- be useful for use by tools (e.g. semantic browing tools or integrated + -- be useful for use by tools (e.g. semantic browsing tools or integrated -- development environments) that are driven from the .ALI file. S_GCC_Full : aliased constant S := "/FULL_PATH_IN_BRIEF_MESSAGES " & @@ -2404,7 +2404,7 @@ package VMS_Data is -- allows proper processing of the output -- generated by specialized tools including -- gnatprep (where --! is used) and the SPARK - -- annnotation language (where --# is used). + -- annotation language (where --# is used). -- For the purposes of this rule, a special -- character is defined as being in one of the -- ASCII ranges 16#21#..16#2F# or @@ -3211,7 +3211,7 @@ package VMS_Data is -- -- NOREDUNDANT Suppress warnings for redundant constructs. -- - -- SUPPRESS Completely suppresse the output of all warning + -- SUPPRESS Completely suppress the output of all warning -- messages. Same as /NOWARNINGS. -- -- UNCHECKED_CONVERSIONS Activates warnings on unchecked conversions. @@ -3323,7 +3323,7 @@ package VMS_Data is -- of lower case. -- -- NONE No wide characters are allowed. Same - -- as /NOWIDE_CHARCTER_ENCODING. + -- as /NOWIDE_CHARACTER_ENCODING. -- -- HEX In this encoding, a wide character is represented by -- the following five character sequence: ESC a b c d @@ -3363,7 +3363,7 @@ package VMS_Data is -- 16#0800#-16#ffff#: 2#1110xxxx# 2#10xxxxxx# 2#10xxxxxx# -- -- where the xxx bits correspond to the left-padded bits - -- of the the 16-bit character value. Note that all lower + -- of the 16-bit character value. Note that all lower -- half ASCII characters are represented as ASCII bytes -- and all upper half characters and other wide characters -- are represented as sequences of upper-half (The full @@ -3982,7 +3982,7 @@ package VMS_Data is S_Link_Library : aliased constant S := "/LIBRARY=|" & "-l|"; - -- /LYBRARY=xyz + -- /LIBRARY=xyz -- -- Link with library named "xyz". @@ -4046,7 +4046,7 @@ package VMS_Data is -- -- Specifies the style of codes returned by -- Ada.Command_Line.Set_Exit_Status. Must be used in conjunction with - -- and match the Bind qualifer with the same name. + -- and match the Bind qualifier with the same name. -- -- POSIX (D) Return Posix compatible exit codes. -- @@ -4081,7 +4081,7 @@ package VMS_Data is "--for-linker="; -- /<other> -- - -- Any other switch that will be transmited to the underlying linker. + -- Any other switch that will be transmitted to the underlying linker. Link_Switches : aliased constant Switches := (S_Link_Add 'Access, @@ -4424,7 +4424,7 @@ package VMS_Data is -- a Unix-style Makefile. By default, each source file is prefixed with -- its (relative or absolute) directory name. This name is whatever you -- specified in the various /SOURCE_SEARCH and /SEARCH qualifiers. If - -- you also speficy the /QUIET qualifier, only the source file names, + -- you also specify the /QUIET qualifier, only the source file names, -- without relative paths, are output. If you just specify the -- /DEPENDENCY_LIST qualifier, dependencies of the GNAT internal system -- files are omitted. This is typically what you want. If you also @@ -4486,7 +4486,7 @@ package VMS_Data is -- -- Force recompilations. Recompile all sources, even though some object -- files may be up to date, but don't recompile predefined or GNAT - -- internal files unless the /ALL_FILES qualfier is also specified. + -- internal files unless the /ALL_FILES qualifier is also specified. S_Make_Full : aliased constant S := "/FULL_PATH_IN_BRIEF_MESSAGES " & "-F"; @@ -4674,7 +4674,7 @@ package VMS_Data is -- /NOPROCESSES (D) -- /PROCESSES=NNN -- - -- Use NNN processes to carry out the (re)complations. If you have a + -- Use NNN processes to carry out the (re)compilations. If you have a -- multiprocessor machine, compilations will occur in parallel. In the -- event of compilation errors, messages from various compilations might -- get interspersed (but GNAT MAKE will give you the full ordered list of @@ -5138,7 +5138,7 @@ package VMS_Data is -- CYCLOMATIC_OFF Do not compute the McCabe Cyclomatic -- Complexity -- ESSENTIAL_ON Compute the Essential Complexity - -- ESSENTIAL_OFF Do not ompute the Essential Complexity + -- ESSENTIAL_OFF Do not compute the Essential Complexity -- LOOP_NESTIMG_ON Compute the maximal loop nesting -- LOOP_NESTIMG_OFF Do not compute the maximal loop nesting -- AVERAGE_COMPLEXITY_ON Compute the average complexity for @@ -5393,7 +5393,7 @@ package VMS_Data is -- -- Create or update a project file. 'file_name' may include directory -- information. The specified file must be writable. There may be only - -- one qualifier /PROJECT_FILE. When a qualifier /PROJECT_DILE is + -- one qualifier /PROJECT_FILE. When a qualifier /PROJECT_FILE is -- specified, no qualifier /CONFIG_FILE may be specified. S_Name_Subdirs : aliased constant S := "/SUBDIRS=<" & @@ -5770,7 +5770,7 @@ package VMS_Data is -- -- Specifies the form of the line terminators in the produced source. -- By default, the form of the line terminator depends on the platforms. - -- On Unix and VMS, it is a Line Feed (LF) chararcter. On Windows (DOS), + -- On Unix and VMS, it is a Line Feed (LF) character. On Windows (DOS), -- It is a Carriage Return (CR) followed by a Line Feed. -- The Options DOS and CRLF are equivalent. The options UNIX and LF are -- also equivalent. @@ -5825,7 +5825,7 @@ package VMS_Data is "-W8"; -- /RESULT_ENCODING[=encoding-type] -- - -- Specify the wide character encoding method used when writtimg the + -- Specify the wide character encoding method used when writing the -- reformatted code in the result file. 'encoding-type' is one of the -- following: -- @@ -6487,7 +6487,7 @@ package VMS_Data is -- -- (nnn is a non-negative integer). Set the indentation level in the -- generated body stub to nnn. nnn=0 means "no indentation". - -- Default insdentation is 3. + -- Default indentation is 3. S_Stub_Keep : aliased constant S := "/KEEP " & "-k"; |